crop-chem-docs/corpus/epa_ppls/100-1508.md

# CRUISERMAXX VIBRANCE

- EPA Reg No: **100-1508**
- Registrant: SYNGENTA CROP PROTECTION, LLC
- Signal word: Caution
- Active ingredients: Thiamethoxam (20.8%); Fludioxonil (1.04%); Metalaxyl-M (3.13%); Sedaxane (1.04%)
- Label accepted: 2026-07-09
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000100-01508-20260709.pdf

---
July 9, 2026
Patsy Laird
Regulatory Manager, Seedcare
Syngenta Crop Protection, LLC
P.O. Box 18300
Greensboro, NC 27419
Subject: Label Amendment - Registration Review Mitigation for Sedaxane
 Product Name: CRUISERMAX X® VIBRANCE®
EPA Registration Number: 100-1508
 Application Date: February 13, 2026
Case Number: 684604
Dear Mrs. Patsy Laird:
The Agency, in accordance with the Federal Insecticide, Fungicide, and Rodenticide Act
(FIFRA), as amended, has completed reviewing all the information submitted with your
application to support the Registration Review of the above referenced product in
connection with the Sedaxane Interim Decision, and has concluded that your submission
is acceptable. The label referred to above, submitted in connection with registration under
FIFRA, as amended, is acceptable.
Should you wish to add/retain a reference to the company’s website on your label, then
please be aware that the website becomes labeling under the Federal Insecticide,
Fungicide, and Rodenticide Act and is subject to review by the Agency. If the website is
false or misleading, the product would be misbranded and unlawful to sell or distribute
under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) list examples of statements EPA may
consider false or misleading. In addition, regardless of whether a website is referenced on
your product’s label, claims made on the website may not substantially differ from those
claims approved through the registration process. Therefore, should the Agency find or if it
is brought to our attention that a website contains false or misleading statements or
claims substantially differing from the EPA approved registration, the website will be
referred to the EPA’s Office of Enforcement and Compliance Assurance.

Page 2 of 2
EPA Reg. No. 100-1508
Decision No. 684604

A stamped copy of your labeling is enclosed for your records. This labeling
supersedes all previously accepted labeling and must be used at your next label
printing. You must submit one copy of the final printed labeling before you release
the product for shipment with the new labeling. In accordance with 40 CFR
152.130(c), you may distribute or sell this product under the previously approved
labeling for 12 months from the date of this letter. After 12 months, you may only
distribute or sell this product if it bears this new revised labeling or subsequently
approved labeling. “To distribute or sell” is defined under FIFRA section 2(gg) and
its implementing regulation at 40 CFR 152.3.

If you have any questions about this letter, please contact Samantha Carter by phone at
202-566-1179, or via email at carter.samantha@epa.gov.


 S i n c e r e l y ,


 Jaclyn Pyne, Team Leader
 R i s k M a n a g e m e n t a n d I m p l e m e n t a t i o n B r a n c h 3
 P e s t i c i d e R e - E v a l u a t i o n D i v i s i o n
 O f f i c e o f P e s t i c i d e P r o g r a m s


ENCLOSURE: Stamped label

CruiserMaxx Vibrance
Page 1
(Master label)
THIAMETHOXAM GROUP 4A INSECTICIDE
MEFENOXAM GROUP 4 FUNGICIDE
SEDAXANE GROUP 7 FUNGICIDE
FLUDIOXONIL GROUP 12 FUNGICIDE
CruiserMaxx® Vibrance®
Insecticide with Fungicides
A seed treatment product for protection against damage from listed insects, seed-borne
diseases, and seedling diseases on dried shelled peas and beans, and soybean.
Active Ingredients:
Thiamethoxam1 ............................................................................. 20.80%
Mefenoxam2 .................................................................................... 3.13%
Fludioxonil3...................................................................................... 1.04%
Sedaxane4....................................................................................... 1.04%
Other Ingredients: 73.99%
Total: 100.00%
1CAS No. 153719-23-4
2CAS No. 70630-17-0 and CAS No. 69516-34-3
3CAS No. 131341-86-1
4CAS No. 874967-67-6
CruiserMaxx Vibrance is a flowable concentrate for seed treatment containing 1.99 lb
thiamethoxam, 0.30 lb mefenoxam, 0.10 lb fludioxonil and 0.10 lb sedaxane per gallon.
KEEP OUT OF REACH OF CHILDREN.
CAUTION
See additional precautionary statements and directions for use in booklet [on label].
EPA Reg. No. 100-1508
EPA Est. XXXXX
[Batch Code: _______] (For nonrefillables only)
SCP
__________
Net Contents
Jul 09, 2026
100-1508

CruiserMaxx Vibrance
Page 2

FIRST AID
If swallowed x Call a poison control center or doctor immediately for treatment
advice.
x Have person sip a glass of water if able to swallow.
x Do not induce vomiting unless told to do so by a poison control
center or doctor.
x Do not give anything by mouth to an unconscious person.
Have the product container or label with you when calling a poison control center or
doctor, or going for treatment.
HOTLINE NUMBER
For 24-Hour Medical Emergency Assistance (Human or Animal)
or Chemical Emergency Assistance (Spill, Leak, Fire, or Accident),
Call
1-800-888-8372

PRECAUTIONARY STATEMENTS

HAZARDS TO HUMANS AND DOMESTIC ANIMALS

CAUTION

Harmful if swallowed. Wash thoroughly with soap and water after handling and before
eating, drinking, chewing gum, using tobacco, or using the toilet.

PERSONAL PROTECTIVE EQUIPMENT (PPE)

Applicators and other handlers must wear:

x Long-sleeved shirt and long pants
x Chemical-resistant gloves made of: EDUULHUODPLQDWHEXW\OUXEEHUPLOVQLWULOH
UXEEHUPLOVQHRSUHQHUXEEHUPLOV SRO\YLQ\OFKORULGH39&PLOV
Viton™ PLOV
x Shoes plus socks

Follow the manufacturer’s instructions for cleaning/maintaining PPE. If no such
instructions for washables exist, use detergent and hot water. Keep and wash PPE
separately from other laundry.

ENGINEERING CONTROLS

When handlers use closed systems in a manner that meets the requirements listed in
the Worker Protection Standard (WPS) for agricultural pesticides (40 CFR 170.607 (d)
and (e)), the handler PPE requirements may be reduced or modified as specified in the
WPS.

CruiserMaxx Vibrance
Page 3
USER SAFETY RECOMMENDATIONS
Users should:
x Wash hands before eating, drinking, chewing gum, using tobacco, or using the
toilet.
x Remove clothing/PPE immediately if pesticide gets inside. Then wash
thoroughly and put on clean clothing.
x Remove PPE immediately after handling this product. Wash the outside of
gloves before removing. As soon as possible, wash thoroughly and change
into clean clothing.

ENVIRONMENTAL HAZARDS

This product is toxic to wildlife, freshwater and estuarine/marine fish, oysters, and
shrimp and highly toxic to aquatic invertebrates. Runoff may be hazardous to aquatic
organisms in neighboring areas. Exposed treated seed may be hazardous to wildlife.
Do not contaminate water when disposing of equipment washwater or rinsate.

Pollinator Precautions
Thiamethoxam is highly toxic to bees, and effects are possible as a result of exposure
to translocated residues in blooming crops.

Groundwater Advisory
Mefenoxam is known to leach through soil into ground water under certain conditions as
a result of label use. This chemical may leach into groundwater if used in areas where
soils are permeable, particularly where the water table is shallow, and may result in
groundwater contamination.

Fludioxonil has properties and characteristics associated with chemicals detected in
groundwater. This chemical may leach into groundwater if used in areas where soils
are permeable, particularly where the water table is shallow, and may result in
groundwater contamination.

Thiamethoxam has properties and characteristics associated with chemicals detected in
groundwater. This chemical may leach into groundwater if used in areas where soils
are permeable, particularly where the water table is shallow, and may result in
groundwater contamination.

Physical and Chemical Hazards
Do not use, pour, spill or store near heat or open flame. Do not store near or use with
oxidizing agents.

CruiserMaxx Vibrance
Page 4
CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY

NOTICE: Read the entire Directions for Use and Conditions of Sale and Limitation of
Warranty and Liability before buying or using this product. If the terms are not
acceptable, return the product at once, unopened, and the purchase price will be
refunded.

The Directions for Use of this product must be followed carefully. It is impossible to
eliminate all risks inherently associated with the use of this product. Crop injury,
ineffectiveness or other unintended consequences may result because of such factors
as manner of use or application, weather or crop conditions, presence of other materials
or other influencing factors in the use of the product, which are beyond the control of
SYNGENTA CROP PROTECTION, LLC or Seller. To the extent permitted by
applicable law, Buyer and User agree to hold SYNGENTA and Seller harmless for any
claims relating to such factors.

SYNGENTA warrants that this product conforms to the chemical description on the label
and is reasonably fit for the purposes stated in the Directions for Use, subject to the
inherent risks referred to above, when used in accordance with directions under normal
use conditions. To the extent permitted by applicable law: (1) this warranty does not
extend to the use of the product contrary to label instructions, or under conditions not
reasonably foreseeable to or beyond the control of Seller or SYNGENTA, and (2) Buyer
and User assume the risk of any such use. TO THE EXTENT PERMITTED BY
APPLICABLE LAW, SYNGENTA MAKES NO WARRANTIES OF MERCHANTABILITY
OR OF FITNESS FOR A PARTICULAR PURPOSE NOR ANY OTHER EXPRESS OR
IMPLIED WARRANTY EXCEPT AS WARRANTED BY THIS LABEL.

To the extent permitted by applicable law, in no event shall SYNGENTA be liable for
any incidental, consequential or special damages resulting from the use or handling of
this product. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THE
EXCLUSIVE REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY
OF SYNGENTA AND SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES
OR DAMAGES (INCLUDING CLAIMS BASED ON BREACH OF WARRANTY,
CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE)
RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, SHALL BE THE
RETURN OF THE PURCHASE PRICE OF THE PRODUCT OR, AT THE ELECTION
OF SYNGENTA OR SELLER, THE REPLACEMENT OF THE PRODUCT.

SYNGENTA and Seller offer this product, and Buyer and User accept it, subject to the
foregoing Conditions of Sale and Limitation of Warranty and Liability, which may not be
modified except by written agreement signed by a duly authorized representative of
SYNGENTA.

CruiserMaxx Vibrance
Page 5
DIRECTIONS FOR USE

It is a violation of federal law to use this product in a manner inconsistent with its
labeling.

For use in commercial seed treatment facilities. Use is also permitted as an end-use
seed treatment on agricultural establishments at planting, or immediately before
planting, as specified in the Specific Crop Use Directions. This product is to be used in
liquid or slurry treaters only.

Treatment of highly mechanically scarred or damaged seed or seed known to be of low
vigor and poor quality may result in reduced germination and/or reduction of seed and
seedling vigor. Treat a quantity of seed using equipment similar to that planned for
treating the total seed lot. Prior to treatment, conduct germination tests on a portion of
seed before committing the total seed lot to a selected seed treatment.

Due to seed quality, crop or variety sensitivity, and seed storage conditions beyond the
control of Syngenta, no claims are made to guarantee the germination of seed or
propagating material for all crop seed when treated with CruiserMaxx Vibrance.


RESTRICTIONS

Do not apply this product in a way that will contact workers or other persons, either
directly or through drift. Only protected handlers may be in the area during application.
For any requirements specific to your State or Tribe, consult the agency responsible for
pesticide regulation.

Maximum usage when applying both metalaxyl- and mefenoxam-containing
products to the same crop within the same season: Do not apply more than the
maximum seasonal total for the active ingredient as stated on the label of the product
containing the lowest seasonal total on that crop.

AGRICULTURAL USE REQUIREMENTS

Use this product only in accordance with its labeling and with the Worker Protection
Standard, 40 CFR part 170. This Standard contains requirements for the protection of
agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of
agricultural pesticides. It contains requirements for training, decontamination,
notification, and emergency assistance. It also contains specific instructions and
exceptions pertaining to the statements on this label about personal protective
equipment (PPE) and restricted-entry interval. The requirements in this box only apply
to uses of this product that are covered by the Worker Protection Standard.

Do not enter or allow worker entry into treated areas during the restricted-entry
interval (REI) of 48 hours. Exception: If the seed is treated with the product and the
treated seed is soil-injected or soil-incorporated, the Worker Protection Standard, under

CruiserMaxx Vibrance
Page 6
certain circumstances, allows workers to enter the treated area if there will be no
contact with anything that has been treated.

PPE required for early entry to treated areas that is permitted under the Worker
Protection Standard and that involves contact with anything that has been treated, such
as plants, soil, or water is:
x Coveralls
x Chemical-resistant gloves: EDUULHUODPLQDWHEXW\OUXEEHUPLOVQLWULOHUXEEHU
PLOVQHRSUHQHUXEEHUPLOVSRO\YLQ\OFKORULGH39&PLOV9LWRQ
mils
x Shoes plus socks

FAILURE TO FOLLOW THE DIRECTIONS FOR USE AND PRECAUTIONS ON THIS
LABEL MAY RESULT IN CROP INJURY, POOR INSECT AND/OR DISEASE
CONTROL, AND/OR ILLEGAL RESIDUES.


USE INFORMATION

CruiserMaxx Vibrance is a seed treatment product containing the active ingredients
thiamethoxam (insecticide) and fludioxonil, mefenoxam and sedaxane (fungicides).
CruiserMaxx Vibrance protects against damage from listed early-season insects, soil-
borne and seed-borne diseases on dried shelled peas and beans, and soybean.

Thiamethoxam is a systemic seed treatment insecticide belonging to the neonicotinoid
class of chemistry. Thiamethoxam protects against listed chewing and sucking insects
through contact and ingestion.

Mefenoxam fungicide is active against Pythium, Phytophthora and systemic downy
mildew.

Fludioxonil fungicide is active against Fusarium and Rhizoctonia and suppresses seed-
borne Sclerotinia and Phomopsis species.

Sedaxane fungicide is active against seed decay, seedling blight and damping-off
caused by Rhizoctonia species.

CruiserMaxx Vibrance
Page 7
RESISTANCE MANAGEMENT


Insecticide Resistance Management

For resistance management, CruiserMaxx Vibrance contains a Group 4A/thiamethoxam
insecticide. Any insect population may contain individuals naturally resistant to
CruiserMaxx Vibrance and other Group 4A insecticides. The resistant individuals may
dominate the insect population if this group of insecticides are used repeatedly in the
same fields. Appropriate resistance-management strategies should be followed.

Thiamethoxam is a systemic insecticide belonging to the neonicotinoid class of
chemistry which includes nicotinic acetylcholine receptor (nAChR) agonists.

To delay insecticide resistance, take the following steps:
x Rotate the use of CruiserMaxx Vibrance or other Group 4A insecticides within a
growing season, or among growing seasons, with different groups that control the
same pests.
x Use tank mixtures with insecticides from a different group that are equally effective
on the target pest when such use is permitted. Do not rely on the same mixture
repeatedly for the same pest population. Consider any known cross-resistance
issues (for the targeted pests) between the individual components of a mixture. In
addition, consider the following recommendations provided by the Insecticide
Resistance Action Committee (IRAC):
o Individual insecticides selected for use in mixtures should be highly effective and
be applied at the rates at which they are individually registered for use against
the target species.
o Mixtures with components having the same IRAC mode of action classification
are not recommended for insect resistance management.
o When using mixtures, consider any k nown cross-resistance issues between the
individual components for the targeted pest(s).
o Mixtures become less effective if resistance is already developing to one or both
active ingredients, but they may still provide pest management benefits.
o The insect resistance management benefits of an insecticide mixture are greatest
if the two components have similar periods of residual insecticidal activity.
Mixtures of insecticides with unequal periods of residual insecticide activity may
offer an insect resistance management benefit only for the period where both
insecticides are active.
x Adopt an integrated pest management program for insecticide use that includes
scouting, uses historical information related to pesticide use, crop rotation, record
keeping, and which considers cultural, biological and other chemical control
practices.
x Monitor after application for unexpected target pest survival. If the level of survival
suggests the presence of resistance, consult with your local university specialist or
certified pest control advisor.

THIAMETHOXAM GROUP
4A INSECTICIDE

CruiserMaxx Vibrance
Page 8
Contact your local extension specialist or certified crop advisors for any additional
pesticide resistance-management and/or IPM recommendations for the specific site and
pest problems in your area.

Syngenta encourages responsible product stewardship to ensure effective long-term
control of the insect pests on this label.

For additional information on Insect Resistance Management:
x Contact your local Cooperative Extension Service specialist, pest control advisor, or
certified crop advisor
x Visit the Insecticide Resistance Action Committee (IRAC) on the web at:
http://www.irac-online.org

CruiserMaxx Vibrance
Page 9
MEFENOXAM GROUP 4 FUNGICIDE
SEDAXANE GROUP 7 FUNGICIDE
FLUDIOXONIL GROUP 12 FUNGICIDE

Fungicide Resistance Management

For resistance management, please note that CruiserMaxx Vibrance contains Group
4/mefenoxam, Group 7/sedaxane and Group 12/fludioxonil fungicides. Any fungal
population may contain individuals naturally resistant to CruiserMaxx Vibrance and
other Group 4, Group 7, and Group 12 fungicides. A gradual or total loss of pest control
may occur over time if these fungicides are used repeatedly in the same fields.
Appropriate resistance-management strategies should be followed.

Mefenoxam belongs to the phenylamide class of chemistry which interferes with fungal
RNA synthesis. Sedaxane is a succinate dehydrogenase inhibitor (SDHI) and belongs
to the carboxamide class of chemistry which disrupts cellular respiration and energy
generation. Fludioxonil belongs to the phenylpyrrole class of chemistry which interferes
with osmotic signal transduction.

To delay fungicide resistance, take one or more of the following steps:
x Rotate the use of CruiserMaxx Vibrance or other Group 4, Group 7 or Group 12
fungicides within a growing season sequence with different groups that control the
same pathogens.
x Use tank mixtures with fungicide from a different group that are equally effective on
the target pest when such use is permitted. Use at least the minimum application
rate as labeled by the manufacturer.
x Adopt an integrated disease management program for fungicide use that includes
scouting, uses historical information related to pesticide use, and crop rotation, and
which considers host plant resistance, impact of environmental conditions on
disease development, disease thresholds, as well as cultural, biological and other
chemical control practices.
x Where possible, make use of predictive disease models to effectively time fungicide
applications. Note that using predictive models alone is not sufficient to manage
resistance.
x Monitor treated fungal populations for resistance development.
x Contact your local extension specialist or certified crop advisor for any additional
pesticide resistance-management and/or IPM recommendations for specific crop
and pathogens.
x For further information or to report suspected resistance contact Syngenta at 1-866-
Syngent(a) (866-796-4368). You can also contact your pesticide distributor or
university extension specialist to report resistance.

Syngenta encourages responsible product stewardship to ensure effective long-term
control of the fungal diseases on this label.

For additional information on Fungicide Resistance Management:
x Contact Syngenta representatives at 1-866-796-4368
x Contact your local extension specialist or certified crop advisor

CruiserMaxx Vibrance
Page 10
x Visit the Fungicide Resistance Action Committee (FRAC) on the web at:
http://www.frac.info


MIXING PROCEDURES

Important: Always re-circulate CruiserMaxx Vibrance thoroughly before using.

The typical density of CruiserMaxx Vibrance is 9.56 pounds per gallon. Consult the
manufacturer of the application equipment you plan to use for suitability for this
application and for instructions on operation and calibration of the equipment. Follow
the manufacturer application instructions for the seed treatment equipment being used.

Apply CruiserMaxx Vibrance as a water-based slurry utilizing standard slurry seed
treatment equipment which provides uniform seed coverage. Uneven or incomplete
seed coverage may not give the desired level of disease control. Thoroughly mix the
specified amount of CruiserMaxx Vibrance into the required amount of water or liquid
inoculant for the slurry treater and dilution rate to be used.

Certain crops require addition of inoculants when the seed is treated or planted.
CruiserMaxx Vibrance is compatible with several liquid inoculant products. Consult the
maker of the inoculant product and a Syngenta representative for directions before
applying CruiserMaxx Vibrance with inoculants.

The total application volume must be sufficient to provide desired level of coverage.
Dilution is typically done with water or liquid inoculants. The minimum slurry volume to
achieve adequate coverage is 4.0 fluid ounces per 100 pounds of seed. More diluent
may be required to obtain complete coverage.

Continuous agitation or mixing of the slurry mixture is necessary to prevent settling out
of the solution.

Allow seed to dry before bagging.

Follow planter manufacturer specifications for use of talc or other hopper box additives
at planting. Seed must be completely dry before adding to planter.

Required Dye Statement: Seed treated with this product must be visually identifiable
from untreated seed by the use of an approved colorant or dye to prevent accidental
use of treated seed as food for humans or feed for animals. Refer to 21 CFR, Part 2.25.
Any colorant or dye added to treated seed must be cleared for use in accordance with
40 CFR, Part 153.155(c).

CruiserMaxx Vibrance
Page 11
CROP ROTATION RESTRICTIONS

x In the event of crop failure or harvest of a crop grown from seed treated with
CruiserMaxx Vibrance, the field may be replanted according to the following
schedule:
Plantback Interval Table
Immediate Plantback Minimum 30-Day
Plantback Interval

Canola
Cereal Grains: Barley, Corn (Field,
Pop, Sweet), Oats, Rye, Sorghum,
Triticale, and Wheat
Cotton
Dried Shelled Pea and Bean Crop
Subgroup 6C
Oilseeds: Borage, Crambe, Flax Seed,
and Mustard Seed
Potato
Soybean
Sugarbeet

Alfalfa
Cereal Grains Crop Group 15
Cucurbit Vegetables Crop Group 9
Fruiting Vegetables Crop Group 8
Head and Stem Brassica Crop Subgroup
5A
Leafy Brassica Greens Crop Subgroup 5B
Leafy Vegetables Crop Group 4 Legume
Vegetables (Succulent or Dried) Crop
Group 6
Mint: Peppermint and Spearmint
Onion, Dry Bulb
Peanut
Root Vegetables Crop Subgroup 1A
Safflower
Strawberry
Sunflower
Tobacco
Tuberous and Corm Vegetables (Except
Potato) Crop Subgroup 1D

x For any other crops the minimum plant-back interval is 120 days from the date
the seeds treated with CruiserMaxx Vibrance were planted. A cover crop other
than the crops listed above that is planted for erosion control or soil improvement
may be planted sooner than the 120-day interval; however, the crop may not be
grazed or harvested for food or feed.


SEED BAG LABEL REQUIREMENTS

Use of On-Farm Treated Seed (when treated seed are not for sale or distribution)
Treated seed sold or distributed for a use not permitted by the following labeling does
not qualify as an exempted treated article under 40 CFR 152.25(a) and is therefore sale
or distribution of an unregistered pesticide, pursuant to FIFRA section 12.

x Store treated seed away from food and feedstuffs.
x DO NOT allow children, pets, or livestock to have access to treated seed.
x Treated seed are for planting purposes only. DO NOT use for food, feed, or oil
purposes. DO NOT use treated seed for fuel or ethanol production purposes.
x Wear long-sleeved shirt, long pants, sh oes, socks, and chemical-resistant gloves
when handling treated seed.

CruiserMaxx Vibrance
Page 12
x DO NOT plant treated seed by broadcasting to the soil surface. Ensure that all
planted seeds are thoroughly incorporated by the planter during planting. Additional
incorporation may be required to thoroughly cover exposed seeds.
x Treated seed exposed on the soil surface may be hazardous to wildlife. Cover or
collect treated seed spilled during loading and planting (such as in row ends).
x Treated seed must be planted into the soil at a depth greater than 1 inch.
x Manage excess treated seed (e.g., spilled, unused, or expired treated seed) by one
or more of the following methods:
o Collect excess treated seed for reuse for planting.
o Bury excess treated seed (only allowed if totaling 1 pound or less) at least 30 feet
away from bodies of water at a depth of 6 inches or double the planting depth,
whichever is greater.
o Dispose of excess treated seed by placing them in a landfill in accordance with
applicable laws in your state.
o Return excess treated seed to the supplier if permitted by the state.
x DO NOT contaminate bodies of water when disposing of equipment wash water.
x Advisory Dust-Reducing Technique: The use of seed flow lubricants or polymer
coatings may help decrease the amount of dust released during planting. Follow the
recommendations of the planter manufacturer regarding the use of seed flow
lubricants.

Seed Treatment in Commercial Facilities or Seed Treatment on Farm (when
treated seed are to be sold or distributed) – Seed Bag Labeling Requirements

The Federal Seed Act requires that bags containing treated seed shall be labeled with
the following statements:
x This seed has been treated with thiamethoxam insecticide and fludioxonil,
mefenoxam, and sedaxane fungicides.
x DO NOT use for food, feed, or oil purposes.

The U.S. Environmental Protection Agency requires that bags containing treated seed
shall be labeled with the following statements. Any seed treated with CruiserMaxx
Vibrance that is sold or distributed without these statements or that is sold or distributed
for a use not permitted by the following labeling does not qualify as an exempted treated
article under 40 CFR 152.25(a) and is therefore sale or distribution of an unregistered
pesticide, pursuant to FIFRA section 12(a)(1)(A).

This seed has been treated with CruiserMaxx Vibrance (EPA Reg No. 100-1508)
containing fludioxonil, mefenoxam, sedaxane, and thiamethoxam. Any seed treated with
CruiserMaxx Vibrance that is sold or distributed for a use not permitted by the following
labeling does not qualify as an exempted treated article under 40 CFR 152.25(a) and is
therefore sale or distribution of an unregistered pesticide, pursuant to FIFRA section
12(a)(1)(A)

x The contents of this bag are for planting purposes only. DO NOT use for food,
feed, or oil purposes. DO NOT use for fuel or ethanol production purposes.
x Store treated seed away from food and feedstuffs.
x DO NOT allow children, pets, or livestock to have access to treated seed.

CruiserMaxx Vibrance
Page 13
x DO NOT plant treated seed by broadcasting to the soil surface. Ensure that all
planted seeds are thoroughly incorporated by the planter during planting.
Additional incorporation may be required to thoroughly cover exposed seeds.
x Wear long-sleeved shirt, long pants and chemical-resistant gloves when handling
treated seed.
x Treated seed exposed on soil surface may be hazardous to wildlife. Cover or
collect treated seed spilled during loading and planting (such as in row ends).
x Treated seed must be planted into the soil at a depth greater than 1 inch.
x Manage excess treated seed (e.g., spilled, unused, or expired treated seed) by
one or more of the following methods:
o Collect excess treated seed for reuse for planting.
o Bury excess treated seed (only allowed if totaling 1 pound or less) at least 30
feet away from bodies of water at a depth of 6 inches or double the planting
depth, whichever is greater.
o Dispose of excess treated seed by placing them in a landfill in accordance
with applicable laws in your state.
o Return excess treated seed to the supplier if permitted by the state.
x DO NOT contaminate water bodies when disposing of planting equipment wash
waters.
x Dispose of seed packaging in accordance with local requirements.

CruiserMaxx Vibrance
Page 14
x In the event of crop failure or harvest of a crop grown from seed treated with
CruiserMaxx Vibrance, the field may be replanted according to the following
schedule:
Plantback Interval Table
Immediate Plantback Minimum 30-Day
Plantback Interval
Canola
Cereal Grains: Barley, Corn (Field, Pop,
Sweet), Oat, Rye, Sorghum, Triticale,
and Wheat
Cotton
Dried Shelled Pea and Bean
Crop Subgroup 6C
Oilseeds: Borage, Crambe, Flax Seed,
Mustard Seed
Potato
Soybean
Sugarbeet
Alfalfa
Cereal Grains Crop Group 15
Cucurbit Vegetables Crop Group 9
Fruiting Vegetables Crop Group 8
Head and Stem Brassica Crop Subgroup
5A
Leafy Brassica Greens Crop Subgroup
5B
Leafy Vegetables Crop Group 4
Legume Vegetables (Succulent or Dried)
Crop Group 6
Mint: Peppermint and Spearmint
Onion, Dry Bulb
Peanut
Root Vegetables Crop Subgroup 1A
Safflower
Strawberry
Sunflower
Tobacco
Tuberous and Corm Vegetables (Except
Potato) Crop Subgroup 1D

x For any other crops the minimum plant-back interval is 120 days from the date
the seeds treated with CruiserMaxx Vibrance were planted. A cover crop other
than the crops listed above that is planted for erosion control or soil improvement
may be planted sooner than the 120-day interval; however, the crop may not be
grazed or harvested for food or feed.
x For soybeans: DO NOT use at a rate that will result in more than 0.266 lb
thiamethoxam per acre (120 g ai/A) per calendar year, regardless of type of
application (seed treatment and/or foliar). DO NOT apply more than 0.083 lb/A
thiamethoxam (37.8 g ai/A), 0.004 lb/A fludioxonil (2.0 g ai/A), or 0.013 lb/A
mefenoxam (5.7 g ai/A) per calendar year as a seed treatment.
x For dried shelled peas and beans (except soybeans) crop subgroup 6C: DO NOT
apply more than 0.083 lb/A thiamethoxam (37.8 g ai/A), 0.004 lb/A fludioxonil
(2.0 g ai/A) , or 0.013 lb/A mefenoxam (5.7 g ai/A) per calendar year as a seed
treatment.
x This seed has been treated with 0.0756 mg ai thiamethoxam per seed.
x With the exception of soybeans, DO NOT make any soil or foliar application of
products containing thiamethoxam to crops grown from seed treated with a
neonicotinoid insecticide. For soybeans, DO NOT apply a neonicotinoid
insecticide within 45 days of planting seed treated with CruiserMaxx Vibrance.
x The maximum number of applications per season is 2.
x Groundwater Advisory: Mefenoxam is known to leach through soil into ground
water under certain conditions as a result of agricultural use. Fludioxonil and
thiamethoxam have properties and characteristics associated with chemicals
detected in ground water. Mefenoxam, fludioxonil, and thiamethoxam may leach

CruiserMaxx Vibrance
Page 15
into groundwater if used in areas where soils are permeable, particularly where
the water table is shallow.

x Pollinator Precautions: Thiamethoxam is highly toxic to bees, and effects are
possible as a result of exposure to translocated residues in blooming crops.
x Advisory Dust-Reducing Technique: The use of seed flow lubricants or
polymer coatings may help decrease the amount of dust released during
planting. Follow the recommendations of the planter manufacturer regarding the
use of seed flow lubricants.
x [All seed bag tags must be legible and set in at least 8-point font size.]

CROP USE DIRECTIONS

When applied according to the CRUISERMAXX VIBRANCE RATE TABLE,
CruiserMaxx Vibrance provides early season protection against injury by aphids, bean
leaf beetle, grape colaspis, leaf miners, leaf hoppers, Mexican bean beetle, seed corn
maggot, three-cornered alfalfa hopper, thrips, white grubs, and wireworm.

CruiserMaxx Vibrance provides protection against damping-off and seed borne rots due
to Pythium, Phytophthora, Fusarium, Rhizoctonia species and early season
Phytophthora root rot as well as Anthracnose on dry peas and beans, and soybean
caused by seed-borne Colletotrichum spp. CruiserMaxx Vibrance also suppresses
seed-borne Sclerotinia and Phomopsis species. Additional Apron XL
® may be
necessary for high levels of Phytophthora or Pythium. Refer to the table below to
determine the appropriate use rate of Apron XL, if needed. Read and follow all label
direction for Apron XL use.

It is the pesticide user's responsibility to ensure that all products in a tank mix are
registered for the intended use. Users must follow the most restrictive directions and
precautionary language of the products of the mixture (for example, first aid from one
product, REI from another).

CruiserMaxx Vibrance
Page 16
CruiserMaxx Vibrance Rate Table
Crop
Use rate
(fl oz per 100 lb seed)
Grams active ingredient
per 100 kg seed
Cruiser Maxx
Vibrance Apron XL Cruiser Maxx Vibrance Apron XL
Dried Shelled Pea and Bean
Crop Subgroup 6C
including:
Bean Lupinus
species, including:
 grain
 sweet
 white
 white sweet lupin

Bean, Phaseolus
species, including:
 field bean
 kidney bean
 lima bean, dry
 navy bean
pinto bean
 tepary bean
wax bean
 yellow bean

Bean,Vigna species,
including:
 adzuki bean
 blackeyed pea
 catjang
 cowpea
 Crowder pea
 moth bean
 mung bean
 rice bean
 southern pea
 urd bean
Broad Bean (fava
 bean, dry)

Chickpea

Guar

Lablab Bean

Lentil

Pea, Pisum species,
including:
 Field

Pigeon Pea


3.22


0.32

Thiamethoxam 50 gm

Mefenoxam 7.5 gm

Fludioxonil 2.5 gm

Sedaxane 2.5 gm

Total = 62.5 gm

Mefenoxam
7.5 gm

CruiserMaxx Vibrance
Page 17

Crop Rate of CruiserMaxx Vibrance
Soybean, including
soybean, vegetable
fl oz per
100 lb seed1
or
fl oz per 140,000
seeds1
grams ai per
100 kg seed
mg ai
per seed
3.22 fl oz
or
1.50 fl oz per
140,000 seeds
Thiamethoxam 50 gm

Mefenoxam 7.5 gm

Fludioxonil 2.5 gm

Sedaxane 2.5 gm

Total = 62.5 gm

Total of all active ingredients =
0.0945 mg

1The mg ai per seed, fl oz CruiserMaxx Vibrance per 100 lb seed, and fl oz CruiserMaxx Vibrance per
140,000 seeds rates are based on 3,000 seeds per pound.


STORED GRAIN PROTECTION

When treated according to the directions for post-planting protection against listed
pests, CruiserMaxx Vibrance will also provide protection during post treatment storage
of the seed listed on this label against damage from the following stored grain insects:
Indian Meal Moth (Plodia interpunctella), Rice Weevil (Sitophilus oryza), Red Flour
Beetle (Tribolium castaneum), and Lesser Grain Borer (Rhizopertha dominica).

If the seed to be treated has existing infestations of stored grain insects, fumigate the
seed with a registered product approved for such use prior to treating with CruiserMaxx
Vibrance and bagging.

STORAGE AND DISPOSAL

Do not contaminate water, food, or feed by storage or disposal.

Pesticide Storage
Store in a cool, dry place. Storage for extended periods above 90°F is not
recommended.

For minor spills, leaks, etc., follow all precautions indicated on this label and clean up
immediately. Take special care to avoid contamination of equipment and facilities
during cleanup procedures and disposal of wastes.

CruiserMaxx Vibrance
Page 18
Pesticide Disposal
Wastes resulting from the use of this product must be disposed of on site or at an
approved waste disposal facility. If these wastes cannot be disposed of by use
according to label instructions, contact your State Pesticide or Environmental Control
Agency, or the Hazardous Waste Representative at the nearest EPA Regional Office for
guidance.

Container Handling [less than or equal to 5 gallons]
Non-refillable container. Do not reuse or refill this container. Triple rinse container (or
equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining
contents into application equipment or a mix tank and drain for 10 seconds after the flow
begins to drip. Fill the container ¼ full with water and recap. Shake for 10 seconds.
Pour rinsate into application equipment or a mix tank or store rinsate for later use or
disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two
more times. Then offer for recycling if available or puncture and dispose of in a sanitary
landfill, or by incineration, or by other procedures approved by state and local
authorities.

Container Handling [greater than 5 gallons]
Non-refillable container. Do not reuse or refill this container. Triple rinse container (or
equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining
contents into application equipment or a mix tank. Fill the container ¼ full with water.
Replace and tighten closures. Tip container on its side and roll it back and forth,
ensuring at least one complete revolution, for 30 seconds. Stand the container on its
end and tip it back and forth several times. Turn the container over onto its other end
and tip it back and forth several times. Empty the rinsate into application equipment or
a mix tank or store rinsate for later use or disposal. Repeat this procedure two more
times. Then offer for recycling if available or puncture and dispose of in a sanitary
landfill, or by incineration, or by other procedures approved by state and local
authorities.

Container Handling [greater than 5 gallons]
Refillable container. Refill this container with pesticide only. Do not reuse this
container for any other purpose. Cleaning the container before final disposal is the
responsibility of the person disposing of the container. Cleaning before refilling is the
responsibility of the person refilling. To clean container before final disposal, empty the
remaining contents from this container into application equipment or mix tank. Fill the
container about 10 percent full with water. Agitate vigorously or recirculate water with
the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate
collection system. Repeat this rinsing procedure two more times. Then offer for
recycling if available or puncture and dispose of in a sanitary landfill, or by incineration,
or by other procedures approved by state and local authorities.

CONTAINER IS NOT SAFE FOR FOOD, FEED, OR DRINKING WATER.

Apron XL®, CruiserMaxx®, Vibrance®, the ALLIANCE FRAME, the SYNGENTA Logo,
and the PURPOSE ICON are Trademarks of a Syngenta Group Company

Viton™ is a trademark of The Chemours Company FC, LLC

CruiserMaxx Vibrance
Page 19

©20XX Syngenta

For non-emergency (e.g., current product information), call
Syngenta Crop Protection at 1-866-796-4368

Manufactured for:
Syngenta Crop Protection, LLC
P. O. Box 18300
Greensboro, North Carolina 27419-8300


CruiserMaxx Vibrance 1508 MAS 0919 AMEND-B FEB2026-CL – jeb – 05/21/2026
000100-01508.20260216B.CRUISERMAXX_VIBRANCE.AMEND.FEB2026-CL.PDF