crop-chem-docs/corpus/epa_ppls/352-757.md

# Enlite®

- EPA Reg No: **352-757**
- Registrant: CORTEVA AGRISCIENCE, LLC
- Signal word: Caution
- Active ingredients: Thifensulfuron (8.8%); Chlorimuron (2.85%); Flumioxazin (36.21%)
- Label accepted: 2026-06-03
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000352-00757-20260603.pdf

---
June 3, 2026 
 
Terri Moss 
US Crop Protection Regulatory Specialist 
Corteva Agriscience, LLC 
9330 Zionsville Road 
Indianapolis, IN 46268 
terri.moss@corteva.com 
 
Subject: Label Amendment - Registration Review Mitigation for Flumioxazin 
 Product Name: Enlite 
 EPA Registration Number: 352-757 
Case Number: 472677 
Application Dates: August 14, 2021 
 
Dear Terri Moss: 
 
The Agency, in accordance with the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), 
as amended, has completed reviewing all the information submitted with your application to 
support the Registration Review of the above referenced product in connection with the 
Flumioxazin Interim Decision, and has concluded that your submission is acceptable. The label 
referred to above, submitted in connection with registration under FIFRA, as amended, is 
acceptable. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please 
be aware that the website becomes labeling under the Federal Insecticide, Fungicide, and 
Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the 
product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 
40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In 
addition, regardless of whether a website is referenced on your product’s label, claims made on 
the website may not substantially differ from those claims approved through the registration 
process. Therefore, should the Agency find or if it is brought to our attention that a website 
contains false or misleading statements or claims substantially differing from the EPA approved 
registration, the website will be referred to the EPA’s Office of Enforcement and Compliance 
Assurance. 
 
A stamped copy of your labeling is enclosed for your records. This labeling supersedes 
all previously accepted labeling and must be used at your next label printing. You must

Page 2 of 2 
EPA Reg. No. 352-757 
Case No. 472677 
 
submit one copy of the final printed labeling before you release the product for 
shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may 
distribute or sell this product under the previously approved labeling for 12 months 
from the date of this letter. After 12 months, you may only distribute or sell this 
product if it bears this new revised labeling or subsequently approved labeling. “To 
distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation 
at 40 CFR 152.3. 
 
If you have any questions about this letter, please contact Stephanie Burkhardt via email at 
burkhardt.stephanie@epa.gov. 
 
 Sincerely, 
 
 
 
Candice Lavelle, Branch Chief 
Worker Protection and Intergovernmental Affairs 
Branch 
Pesticide Re-Evaluation Division 
Office of Pesticide Programs 
 
 
 
ENCLOSURE: Stamped label

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 8 
(Bulk/Tote Base Label) 
Enlite® 
[Alternate Brand Name: DuPont Enlite®] 
HERBICIDE 
[Unit area pack, the entire contents of this package must be emptied into the spray tank] 
For preplant and preemergence weed control in soybeans. 
Dispersible Granules 
A c t i v e I n g r e d i e n t s B y W e i g h t 
Chlorimuron ethyl 
Ethyl 2-[[[[(4-chloro-6-methoxypyrimidin-2-yl)amino]carbonyl] 
amino]sulfonyl]benzoate 2.85% 
Flumioxazin 
2-[7-fluor-3,4-dihydro-3oxo-4-(2-propynyl)-2H-1,4-benzoxazin-6-yl] 
-4,5,6,7-tetrahydro-1H-isoindole -1,3(2H)-dione 36.21% 
Thifensulfuron methyl 
Methyl 3-[[[[(4-methoxy-6-methyl-1,3,5-triazin-2-yl)amino]carbonyl]amino] 
sulfonyl]-2-thiophenecarboxylate 8.80% 
Other Ingredients 5 2 . 1 4 % 
TOTAL 100.00% 
Keep Out of Reach of Children 
CAUTION 
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do 
not understand this label, find someone to explain it to you in detail.) 
FIRST AID 
IF ON SKIN OR CLOTHING: Take off contaminated clothing. Rinse skin immediately with plenty of 
water for 15-20 minutes. Call a poison control center or doctor for treatment advice. 
IF IN EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact 
lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or 
doctor for treatment advice. 
IF INHALED: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give 
artificial respiration, preferably by mouth-to-mouth, if possible. Call a poison control center or doctor for 
further treatment advice. 
IF SWALLOWED: Call poison control center or doctor immediately for treatment advice. Have person 
sip a glass of water if able to swallow. DO NOT induce vomiting unless told to do so by the poison 
control center or doctor. DO NOT give anything by mouth to an unconscious person. 
Have the product container or label with you when calling a poison control center or doctor, or going for 
treatment. 
You may also contact 1-800-992-5994 for emergency medical treatment information. 
CHLORIMURON ETHYL GROUP 2 HERBICIDE 
FLUMIOXAZIN GROUP 14 HERBICIDE 
THIFENSULFURON METHYL GROUP 2 HERBICIDE 
 
Jun 03, 2026
352-757

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 9 
 
 
Precautionary Statements 
Hazards to Humans and Domestic Animals 
 
CAUTION 
 
Harmful if swallowed, absorbed through skin, or inhaled. Causes moderate eye irritation. Avoid 
contact with skin, eyes or clothing. Avoid breathing dust or spray mist. Remove and wash 
contaminated clothing before reuse. 
 
PERSONAL PROTECTIVE EQUIPMENT (PPE) 
 
Mixers, loaders, applicators, and other handlers must wear: 
 
• Long-sleeved shirt and long pants 
• Wear barrier laminate, butyl rubber ( • 14 mils), nitrile rubber (• 14 mils), neoprene rubber (• 
14 mils), natural rubber (• 14 mils), polyethylene, polyvinyl chloride (• 14 mils), or viton (• 14 
mils) gloves. 
• Shoes plus socks 
 
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables 
exists, use detergent and hot water. Keep and wash PPE separately from other laundry. 
 
ENGINEERING CONTROL STATEMENTS 
 
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements 
listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR part 170.607 (d)-(f)], 
the handler PPE requirements may be reduced or modified as specified in the WPS. 
 
Important: When reduced PPE is worn because a closed system is being used, handlers must be 
provided all PPE specified above for "Applicators and Other Handlers" and have such PPE immediately 
available for use in an emergency, such as a spill or equipment breakdown. 
USER SAFETY RECOMMENDATIONS 
USERS SHOULD: 
• Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, 
using tobacco or using the toilet. Remove clothing/PPE immediately if pesticide gets inside. 
• Then wash thoroughly and put on clean clothing. 
• Remove PPE immediately after handling this product. Wash the outside of gloves before 
removing. As soon as possible, wash thoroughly and change into clean clothing. 
 
 
STORAGE AND DISPOSAL 
Pesticide Storage: Store product in original container only. DO NOT contaminate water, other 
pesticides, fertilizer, food or feed in storage. Store in a cool, dry place. 
 
Pesticide Disposal: DO NOT contaminate water, food, or feed by disposal. Waste resulting from 
the use of this product must be disposed of on site or at an approved waste disposal facility. 
 
CONTAINER HANDLING: Refer to the Net Contents section of this product’s labeling for 
the applicable “Nonrefillable Container” or “Refillable Container” designation. 
 
Nonrefillable Plastic and Metal Containers (Capacity Equal to or Less Than 50 Pounds): 
Nonrefillable container. DO NOT reuse or refill this container. Triple rinse container (or equivalent) 
promptly after emptying. Triple rinse as follows: Empty the remaining contents into application 
equipment or a mix tank. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour 
rinsate into a
pplication equipment or a mix tank or store rinsate for later use or disposal. Drain for 10

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 10 
 
 
seconds after the flow begins to drip. Repeat this procedure two more times. Then, for Plastic 
Containers, offer for recycling if available or puncture and dispose of in a sanitary landfill, or by 
incineration. DO NOT burn, unless allowed by state and local ordinances. For Metal Containers, 
offer for recycling if available or reconditioning if appropriate, or puncture and dispose of in a sanitary 
landfill, or by other procedures approved by state and local authorities. 
 
Nonrefillable Plastic and Metal Containers (Capacity Greater Than 50 Pounds): Nonrefillable 
container. DO NOT reuse or refill this container. Triple rinse container (or equivalent) promptly after 
emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix 
tank. Fill the container 1/4 full with water. Replace and tighten closures. Tip container on its side and 
roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on 
its end and tip it back and forth several times. Turn the container over onto its other end and tip it back 
and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for 
later use or disposal. Repeat this procedure two more times. Then, for Plastic Containers, offer for 
recycling if available or puncture and dispose of in a sanitary landfill, or by incineration. DO NOT burn, 
unless allowed by state and local ordinances. For Metal Containers, offer for recycling if available or 
reconditioning if appropriate, or puncture and dispose of in a sanitary landfill, or by other procedures 
approved by state and local authorities. 
 
Nonrefillable Plastic and Metal Containers, e.g., Intermediate Bulk Containers [IBC] (Size or 
Shape Too Large to be Tipped, Rolled or Turned Upside Down): Nonrefillable container. DO NOT 
reuse or refill this container. Clean container promptly after emptying the contents from this container 
into application equipment or mix tank and before final disposal using the following pressure rinsing 
procedure. Insert a lance fitted with a suitable tank cleaning nozzle into the container and ensure that 
the water spray thoroughly covers the top, bottom and all sides inside the container. The nozzle 
manufacturer generally provides instructions for the appropriate spray pressure, spray duration and/or 
spray volume. If the manufacturer’s instructions are not available, pressure rinse the container for at 
least 60 seconds using a minimum pressure of 30 PSI with a minimum rinse volume of 10% of the 
container volume. Drain, pour or pump rinsate into application equipment or rinsate collection system. 
Repeat this pressure rinsing procedure two more times. Then, for Plastic Containers, offer for recycling if 
available or puncture and dispose of in a sanitary landfill, or by incineration. For Metal Containers, offer 
for recycling if available or reconditioning if appropriate, or puncture and dispose of in a sanitary landfill, 
or by other procedures approved by state and local authorities. 
 
Nonrefillable Paper or Plastic Bags, Fiber Sacks including Flexible Intermediate Bulk 
Containers (FIBC) or Fiber Drums With Liners: Nonrefillable container. DO NOT reuse or refill this 
container. Completely empty paper or plastic bag, fiber sack or drum liner by shaking and tapping 
sides and bottom to loosen clinging particles. Empty residue into application or manufacturing 
equipment. Then offer for recycling if available or dispose of empty paper or plastic bag, fiber sack or 
fiber drum and liner in a sanitary landfill, or by incineration. DO NOT burn, unless allowed by state 
and local ordinances. 
 
Refillable Fiber Drums With Liners: Refillable container (fiber drum only). Refilling Fiber Drum: Refill 
this fiber drum with Enlite
® herbicide containing chlorimuron ethyl, flumioxazin, and thifensulfuron 
methyl. DO NOT reuse this fiber drum for any other purpose. Cleaning before refilling is the 
responsibility of the refiller. 
 
Completely empty liner by shaking and tapping sides and bottom to loosen clinging particles. Empty 
residue into application or manufacturing equipment. Disposing of Fiber Drum and/or Liner: DO NOT 
reuse this fiber drum for any other purpose other than refilling (see preceding). Cleaning the container 
(liner and/or fiber drum) before final disposal is the responsibility of the person disposing of the 
container. Offer the liner for recycling if available or dispose of liner in a sanitary landfill, or by 
incineration. DO NOT burn, unless allowed by state and local ordinances. If drum is contaminated and 
cannot be reused, dispose of it in the manner required for its liner. To clean the fiber drum before final 
disposal, completely empty the fiber drum by shaking and tapping sides and bottom to loosen clinging 
particles. Empty residue into application or manufacturing equipment. Then offer the fiber drum for 
recycling if available or dispose of in a sanitary landfill, or by incineration. DO NOT burn, unless 
allowed by state and local ordinances. 
 
All Other Refillable Containers: Refillable container. Refilling Container: Refill this container with Enlite 
herbicide containing chlorimuron ethyl, flumioxazin, and thifensulfuron methyl only. DO NOT reuse this 
container for any other purpose. Cleaning before refilling is the responsibility of the refiller. Prior to 
refillin
g, inspect carefully for damage such as cracks, punctures, abrasions, worn out threads and closure

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 11 
 
 
devices. If damage is found, DO NOT use the container, contact Corteva Agriscience at the number 
below for instructions. Check for leaks after refilling and before transporting. If leaks are found, DO NOT 
reuse or transport container, contact Corteva Agriscience at the number below for instructions. Disposing 
of Container: DO NOT reuse this container for any other purpose other than refilling (see preceding). 
Cleaning the container before final disposal is the responsibility of the person disposing of the container. 
To clean the container before final disposal, use the following pressure rinsing procedure. Insert a lance 
fitted with a suitable tank cleaning nozzle into the container and ensure that the water spray thoroughly 
covers the top, bottom and all sides inside the container. The nozzle manufacturer generally provides 
instructions for the appropriate spray pressure, spray duration and/or spray volume. If the manufacturer’s 
instructions are not available, pressure rinse the container for at least 60 seconds using a minimum 
pressure of 30 PSI with a minimum rinse volume of 10% of the container volume. Drain, pour or pump 
rinsate into application equipment or rinsate collection system. Repeat this pressure rinsing procedure 
two more times. Then, for Plastic Containers, offer for recycling if available or puncture and dispose of in 
a sanitary landfill, or by incineration. DO NOT burn, unless allowed by state and local ordinances. For 
Metal Containers, offer for recycling if available or reconditioning if appropriate, or puncture and dispose 
of in a sanitar
y landfill, or by other procedures approved by state and local authorities. 
 
ENVIRONMENTAL HAZARDS 
 
This product is toxic to non-target plants and aquatic invertebrates. DO NOT apply directly to water, to 
areas where surface water is present or to intertidal areas below the mean high water mark. Drift or runoff 
may be hazardous to non-target plants and aquatic organisms in neighboring areas. DO NOT apply 
where runoff is likely to occur. DO NOT apply when weather conditions favor drift from treated areas. DO 
NOT contaminate water when cleaning equipment or disposing of equipment washwaters or rinsate. 
 
Groundwater Advisory 
 
This product has properties and characteristics associated with chemicals detected in groundwater. This 
product may leach into groundwater if used in areas where soils are permeable, particularly where the 
water table is shallow. 
 
Surface Water Advisory 
 
This product may impact surface water quality due to runoff of rainwater. This is especially true for poorly 
draining soils and soils with shallow ground water. This product is classified as having high potential for 
reaching surface water via runoff for several months or more after application. A level, well-maintained 
vegetative buffer strip between areas to which this product is applied and surface water features such as 
ponds, streams, and springs will reduce the potential loading of this product from runoff water and 
sediment. Runoff of this product will be greatly reduced by avoiding applications when rainfall or irrigation 
is expected to occur within 48 hours. 
 
Windblown Soil Particles Advisory 
 
This product has the potential to move off-site due to wind erosion. Soils that are subject to wind erosion 
usually have a high silt and/or fine to very fine sand fractions and low organic matter content. Other 
factors which can affects the movement of windblown soil include the intensity and direction of prevailing 
winds, vegetative cover, site slope, rainfall, and drainage patterns. Avoid applying this product if 
prevailing local conditions may be expected to result in off-site movement. 
 
Non-target Organism Advisory 
 
This product is toxic to plants and may adversely impact the forage and habitat of non-target organisms, 
including pollinators, in areas adjacent to the treated area. Protect the forage and habitat of non-target 
organisms by minimizing spray drift. For further guidance and instructions on how to minimize spray drift, 
refer to the Spray Drift management section of this label.

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 12 
 
 
AGRICULTURAL USE REQUIREMENTS 
 
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR 
part 170. Refer to the booklet under “Agricultural Use Requirements” in the Directions for Use sections 
for information about this statement. 
 
 
Refer to the inside of label booklet for additional precautionary information including First Aid and 
Directions For Use. 
 
Notice: Read the entire label. Use only according to label directions. Before using this product, read 
Warranty Disclaimer, Inherent Risks of Use and Limitation of Remedies at end of label booklet. If 
terms are unacceptable, return at once unopened. 
 
EPA reg. No. 352-757 EPA Est. No._______________ 
 
™
®Trademarks of Corteva Agriscience and its affiliated companies 
 
For product information call: 1-800-258-3033 
 
Produced for 
Corteva Agriscience LLC 
9330 Zionsville Road 
Indianapolis, IN 46268 
 
 
NET WEIGHT:: ___________

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 13 
 
 
(Booklet Cover / 
Small Container 
Base Label): 
 
Enlite® 
[Alternate Brand Name: DuPont Enlite®] 
 
HERBICIDE 
 
Unit area pack, the entire contents of this package must be emptied into the spray tank 
For preplant and preemergence weed control in soybeans. 
Dispersible Granules 
A c t i v e I n g r e d i e n t s B y W e i g h t 
Chlorimuron ethyl 
Ethyl 2-[[[[(4-chloro-6-methoxypyrimidin-2-yl)amino]carbonyl] 
amino]sulfonyl]benzoate 2.85% 
Flumioxazin 
2-[7-fluor-3,4-dihydro-3oxo-4-(2-propynyl)-2H-1,4-benzoxazin-6-yl] 
-4,5,6,7-tetrahydro-1H-isoindole -1,3(2H)-dione 36.21% 
Thifensulfuron methyl 
Methyl 3-[[[[(4-methoxy-6-methyl-1,3,5-triazin-2-yl)amino]carbonyl]amino] 
sulfonyl]-2-thiophenecarboxylate 8.80% 
Other Ingredients 5 2 . 1 4 % 
TOTAL 100.00% 
 
Keep Out of Reach of Children 
CAUTION 
 
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do 
not understand this label, find someone to explain it to you in detail.) 
 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR 
part 170. Refer to the booklet under "Agricultural Use Requirements" in the Directions for Use section 
for information about this statement. 
 
Refer to the inside of label booklet for additional precautionary information including First Aid and 
Directions For Use. 
 
Notice: Read the entire label. Use only according to label directions. Before using this product, read 
Warranty Disclaimer, Inherent Risks of Use and Limitation of Remedies at end of label booklet. If 
terms are unacceptable, return at once unopened. 
 
DO NOT transport if this container is damaged or leaking. If the container is damaged, leaking or 
obsolete, or in the event of a major spill, fire or other emergency, contact 1-800-992-5994, day or night. 
 
EPA reg. No. 352-757 EPA Est. No._______________ 
 
™
®Trademarks of Corteva Agriscience and its affiliated companies 
 
CHLORIMURON ETHYL GROUP 2 HERBICIDE 
FLUMIOXAZIN GROUP 14 HERBICIDE 
THIFENSULFURON METHYL GROUP 2 HERBICIDE

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 14 
 
 
For product information call: 1-800-258-3033 
 
Produced for 
Corteva Agriscience LLC 
9330 Zionsville Road 
Indianapolis, IN 46268 
 
NET WEIGHT: ___________

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 15 
 
 
(Page 1 through end): 
FIRST AID 
 
IF ON SKIN OR CLOTHING: Take off contaminated clothing. Rinse skin immediately with plenty of 
water for 15-20 minutes. Call a poison control center or doctor for treatment advice. 
IF IN EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact 
lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or 
doctor for treatment advice. 
IF INHALED: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give 
artificial respiration, preferably by mouth-to-mouth, if possible. Call a poison control center or doctor for 
further treatment advice. 
IF SWALLOWED: Call poison control center or doctor immediately for treatment advice. Have person 
sip a glass of water if able to swallow. DO NOT induce vomiting unless told to do so by the poison 
control center or doctor. DO NOT give anything by mouth to an unconscious person. 
Have the product container or label with you when calling a poison control center or doctor, or going for 
treatment. You may also contact 1-800-992-5994 for emergency medical treatment information. 
 
 
Precautionary Statements 
Hazards to Humans and Domestic Animals 
CAUTION 
 
Harmful if swallowed, absorbed through skin or inhaled. Causes moderate eye irritation. Avoid 
contact with skin, eyes or clothing. Avoid breathing dust or spray mist. Remove and wash 
contaminated clothing before reuse. 
 
PERSONAL PROTECTIVE EQUIPMENT (PPE) 
 
Mixers, loaders, applicators, and other handlers must wear: 
• Long-sleeved shirt and long pants 
• Wear barrier laminate, butyl rubber ( • 14 mils), nitrile rubber (• 14 mils), neoprene rubber (• 14 
mils), natural rubber (• 14 mils), polyethylene, polyvinyl chloride (• 14 mils), or viton (• 14 mils) 
gloves. 
• Shoes plus socks 
 
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables 
exists, use detergent and hot water. Keep and wash PPE separately from other laundry. 
 
Engineering Control Statements 
 
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements 
listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.607 (d)-(f)], the 
handler PPE requirements may be reduced or modified as specified in the WPS. 
 
Important: When reduced PPE is worn because a closed system is being used, handlers must be 
provided all PPE specified above for “Applicators and Other Handlers” and have such PPE immediately 
available for use in an emergency, such as a spill or equipment breakdown. 
 
USER SAFETY RECOMMENDATIONS 
USERS SHOULD: 
• Wash thoroughly with soap and water after handling and before eating, drinking, chewing 
gum, using tobacco or using the toilet.

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 16 
 
 
• Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on 
clean clothing. 
• Remove PPE immediately after handling this product. Wash the outside of gloves before 
removing. As soon as possible, wash thoroughly and change into clean clothing. 
 
ENVIRONMENTAL HAZARDS 
 
This product is toxic to non-target plants and aquatic invertebrates. DO NOT apply directly to water, to 
areas where surface water is present or to intertidal areas below the mean high water mark. Drift or runoff 
may be hazardous to non-target plants and aquatic organisms in neighboring areas. DO NOT apply 
where runoff is likely to occur. DO NOT apply when weather conditions favor drift from treated areas. DO 
NOT contaminate water when cleaning equipment or disposing of equipment washwaters or rinsate. 
 
Groundwater Advisory 
This product has properties and characteristics associated with chemicals detected in groundwater. This 
product may leach into groundwater if used in areas where soils are permeable, particularly where the 
water table is shallow. 
 
Surface Water Advisory 
This product may impact surface water quality due to runoff of rainwater. This is especially true for poorly 
draining soils and soils with shallow ground water. This product is classified as having high potential for 
reaching surface water via runoff for several months or more after application. A level, well-maintained 
vegetative buffer strip between areas to which this product is applied and surface water features such as 
ponds, streams, and springs will reduce the potential loading of this product from runoff water and 
sediment. Runoff of this product will be greatly reduced by avoiding applications when rainfall or irrigation 
is expected to occur within 48 hours. 
 
Windblown Soil Particles Advisory 
This product has the potential to move off-site due to wind erosion. Soils that are subject to wind erosion 
usually have a high silt and/or fine to very fine sand fractions and low organic matter content. Other 
factors which can affects the movement of windblown soil include the intensity and direction of prevailing 
winds, vegetative cover, site slope, rainfall, and drainage patterns. Avoid applying this product if 
prevailing local conditions may be expected to result in off-site movement. 
 
Non-target Organism Advisory 
This product is toxic to plants and may adversely impact the forage and habitat of non-target organisms, 
including pollinators, in areas adjacent to the treated area. Protect the forage and habitat of non-target 
organisms by minimizing spray drift. For further guidance and instructions on how to minimize spray drift, 
refer to the Spray Drift management section of this label. 
 
DIRECTIONS FOR USE 
 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
 
DO NOT apply this product in a way that will contact workers or other persons, either directly or through 
drift. Only protected handlers may be in the area during application. For any requirements specific to your 
State or Tribe, consult the agency responsible for pesticide regulation. 
 
Enlite herbicide, also referred to as Enlite
® herbicide or Enlite, must be used only in accordance with 
instructions on this label or as otherwise permitted by FIFRA. Always read the entire label, including the 
Limitation of Warranty and Liability.

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 17 
 
 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR 
part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, 
nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, 
decontamination, notification, and emergency assistance. It also contains specific instructions and 
exceptions pertaining to the statements on this label about personal protective equipment(PPE) and 
restricted-entry interval. The requirements in this box only apply to uses of this product that are covered 
by the Worker Protection Standard. 
 
DO NOT enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 
hours. 
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and 
that involves contact with anything that has been treated, including plants, soil, or water, is: 
• Coveralls 
• Wear barrier laminate, butyl rubber ( • 14 mils), nitrile rubber (• 14 mils), neoprene rubber (• 14 
mils), natural rubber (• 14 mils), polyethylene, polyvinyl chloride (• 14 mils), or viton (• 14 mils) 
gloves. 
• Shoes plus socks 
 
PRODUCT INFORMATION 
 
Enlite herbicide is a dispersible granule formulation to be mixed with water at a rate of 2.8 to 4.25 ounces 
(refer to rate summary table in APPLICATION INFORMATION section for lb ai equivalents) per acre, and 
sprayed for selective burndown and limited residual weed control in soybeans. When applied according to 
the instructions on this label, it will control many broadleaf weeds and provide partial control of certain 
annual grasses. 
 
Crop injury may occur from applications made to poorly drained soils under cool, wet conditions. Risk of 
crop injury can be minimized by not using on poorly drained soils, planting at least 1.5 inches deep and 
completely covering seeds with soil prior to preemergence applications. 
 
Residual applications of Enlite require rainfall or sprinkler irrigation to activate the herbicide. Degree of 
control and duration of effect depend on: rate used, weed spectrum, growing conditions at and following 
time of treatment, soil pH, texture, organic matter, moisture and precipitation. 
 
Best residual control is obtained if Enlite is applied to moist soil and followed by rainfall or irrigation (~1 
inch) before weeds germinate. Several small rainfalls of less than 0.25 inch each are not as beneficial as 
one large rainfall of 0.5 - 1 inch. On dry soil, more moisture is required for activation (1- 2 inches) before 
weed emergence. If moisture is insufficient to activate the herbicide, a rotary hoeing or shallow cultivation 
needs to be made after emergence of the crop while weeds are small enough to be controlled by 
mechanical means. Deep cultivation reduces the effectiveness of Enlite and needs to be avoided. 
 
Excessive rainfall received in a short period of time following the emergence of soybeans treated with a 
preplant or preemergence application of Enlite herbicide may cause minor leaf burn, crinkling, or 
defoliation of some lower leaves of the soybean plants. 
 
During the growing season, excessive periods of rainfall and cool, cloudy weather may cause temporary 
soybean stunting. Soybeans rapidly outgrow stunting once favorable (sunny, warm temperatures) 
conditions return. 
 
BIOLOGICAL ACTIVITY 
 
Enlite has two modes of action and rapidly inhibits the growth of susceptible weed species. Following 
application of preplant or preemergence treatment, susceptible weeds may germinate and emerge, but

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 18 
 
 
growth then ceases and leaves become yellow and/or brown by 3-5 days after emergence. Death of leaf 
tissue and growing point will follow in some species while others will remain green but stunted and 
noncompetitive. Following a burndown application, growth of susceptible weeds ceases followed by 
tissue yellowing and browning and death of the growing point. Enlite provides partial control of some 
annual grasses when used pre-plant or preemergence but other products may be needed to ensure 
adequate grass control. 
 
RESTRICTIONS 
 
• DO NOT use for crops other than soybeans. 
• DO NOT exceed the full labeled rate for the geography. A maximum of two applications, not to 
exceed the total fully labeled rate of Enlite, may be made per year. 
• DO NOT apply more than a total of 0.82 ounces (0.0513 lb) active ingredient per acre 
chlorimuron ethyl in the Northern and Central Region states or 1.07 ounces (0.0669 lb) active 
ingredient per acre chlorimuron ethyl in the Southern Region states per year. This includes 
combinations of preemergence applications of Enlite, as well as chlorimuron ethyl from other 
application(s). 
• DO NOT apply this product through any type of irrigation system. 
• DO NOT apply Enlite to frozen or snow covered ground. 
• DO NOT perform any tillage operations after fall applications or residual weed control will be 
reduced. 
• DO NOT apply Enlite to cracking soybeans or after the soybean crop has emerged as severe 
injury or death of the crop will occur. 
• DO NOT irrigate when soybeans are cracking. 
• DO NOT apply Enlite within 14 days before or after an application of an organophosphate 
insecticide on any soybean variety that is not sulfonylurea tolerant soybean, as severe crop 
injury may occur. 
• DO NOT apply this product by air within 40 feet of nontarget plants including non-target crops. 
• DO NOT apply this product by air within 100 ft. of emerged cotton crops. 
• DO NOT apply this product by air within 40 feet of streams, wetlands, marshes, ponds, lakes and 
reservoirs. 
• DO NOT apply Enlite by air in the state of New York. 
• DO NOT apply to land that has been or will be treated with metsulfuron and/or chlorsulfuron-
containing herbicides in Nebraska and Kansas without observing the rotational crop intervals for 
those products. 
• DO NOT apply or drain or flush equipment on or near desirable trees or other plants, or on areas 
where their roots may extend, or in locations where the chemical may be washed or moved into 
contact with their roots, or injury to desirable trees and plants may occur. 
• DO NOT use on lawns, walks, driveways or tennis courts. 
• DO NOT contaminate any body of water. 
• DO NOT mix/load or use within 50 feet of all wells including abandoned wells, drainage wells, and 
sink holes. 
• DO NOT apply this product when weather conditions favor spray drift from treated areas. 
• DO NOT discharge excess material on the soil at a single spot in the field or mixing/loading 
station. 
• DO NOT graze treated fields or harvest for forage or hay. 
• DO NOT
 use low pressure and high volume hand wand equipment.

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 19 
 
 
Use Restriction Summary Table for Enlite: 
CROPS 
Maximum 
Oz of Product/ 
Acre/ Single 
Application 
Maximum 
Lb AI/ 
Acre/Single 
Application 
Maximum 
Number of 
Applications 
per 
Year 
Maximum 
Oz of 
Product 
/Acre/Year 
Maximum 
Lb AI/A 
per 
Year 
Retreat 
Interval 
(Days) 
Last 
Treatment 
Preharvest 
Interval 
Soybean 4.25 oz 
0.0076 lb ai 
chlorimuron + 
0.0962 lb ai 
flumioxazin + 
0.0234 lb ai 
thifensulfuron 
2 4.25 oz 
0.0076 lb ai 
chlorimuron + 
0.0962 lb ai 
flumioxazin + 
0.0234 lb ai 
thifensulfuron 
14 days 90 days 
 
You must empty the entire contents of the Enlite unit area package into the spray tank when dispensed 
through a multi-product dispensing system. Each dispensed amount of product is designed for a specific 
spray load, acreage, and use rate. 
 
PRECAUTIONS 
 
• Use only in the geographies identified in the "Geographic Use Regions" section of this label. 
• Prior to using Enlite herbicide, consideration needs to be given to crop rotation plans. Crops other 
than soybeans may be extremely sensitive to low concentrations of Enlite remaining in the soil the 
next planting season. Choice of rotation crop is restricted following application of Enlite. (See 
"ROTATIONAL CROP GUIDELINES" for your geographical region). 
• Crop injury may occur from applications made to poorly drained soils under cool, wet conditions. 
• Excessive rainfall received in a short period of time following the emergence of soybeans treated with 
a preplant or preemergence application of Enlite herbicide may cause minor leaf burn, crinkling, or 
defoliation of some lower leaves of the soybean plants. 
• Excessive periods of rainfall and cool, cloudy weather may cause temporary soybean stunting. 
• Seedling disease, nematodes, cold weather, deep planting (more than 2 inches), excessive moisture, 
high salt concentration, or drought may weaken soybean seedlings and increase possibility of crop 
injury. 
• Calibrate sprayers only with clean water away from the well site. Make scheduled checks of spray 
equipment. Ensure that all operation employees accurately measure pesticides. Mix only enough 
product for the job at hand. and avoid overfilling of spray tank. 
• When triple-rinsing the pesticide container, be sure to add the rinsate to the spray mix. 
• Thoroughly clean Enlite from application equipment immediately after use and prior to spraying crops 
other than soybeans. Failure to remove even small amounts of Enlite from application equipment may 
result in injury to subsequently sprayed crops. 
• Enlite can be applied in tank mixtures with organophosphate insecticides or at any time preceding or 
following an application of an organophosphate insecticide prior to emergence of any sulfonylurea 
tolerant soybean variety. Tank mixtures of Enlite plus organophosphate insecticides applied preplant 
or preemergence to sulfonylurea tolerant soybean varieties may result in minor transient crop 
response (i.e. stunting and/or chlorosis). 
• Prevent drift spray to desirable plants. 
• Keep from contact with fertilizers, insecticides, fungicides and seeds during storage. Avoid storage 
of pesticides near well sites. 
 
WEED RESISTANCE MANAGEMENT 
For resistance management, Enlite contains both a Group 2 and a Group 14 herbicide. Any weed 
population may contain or develop plants naturally resistant to Enlite and other Group 2 and/or Group 14 
herbicides. The resistant biotypes may dominate the weed population if these herbicides are used 
repeatedly in the same field. Appropriate resistance management strategies should be followed.

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 20 
 
 
Proactively implementing diversified weed control strategies to minimize selection for weed populations 
resistant to one or more herbicides is a best practice. A diversified weed management program may 
include the use of multiple herbicides with different sites of action and overlapping weed spectrum with or 
without tillage operations and/or other cultural practices. Research has demonstrated that using the 
labeled rate and directions for use is important to delay the selection for resistance. 
The continued effectiveness of this product depends on the successful implementation of a weed 
resistance management program. 
To aid in the prevention of developing weeds resistant to this product, users should: 
• Scout fields before application to ensure herbicides and rates will be appropriate for the weed 
species and weed sizes present. 
• Start with a clean field, using either a burndown herbicide application or tillage. 
Control weeds early when they are relatively small (less than 4 inches). 
• Apply full rates of Enlite herbicide for the most difficult to control weed in the field at the specified 
time (correct weed size) to minimize weed escapes. 
• Scout fields after application to detect weed esc apes or shifts in control of weed species. 
Control weed escapes before they reproduce by seed or proliferate vegetatively. 
• Report any incidence of non-performance of this product against a particular weed to your 
company representative, local retailer, or county extension agent. 
• Contact your local company representative, crop advisor, or extension agent to find out if 
suspected resistant weeds to this MOA have been found in your region. If resistant biotypes of 
target weeds have been reported, use the application rates of this product specified for your local 
conditions. Tank mix products so that there are multiple effective sites of actions for each target 
weed. 
• If resistance is suspected, treat weed escapes with an herbicide having a site of action other than 
Group 2 or 14 and/or use nonchemical methods to remove escapes, as practical, with the goal of 
preventing further seed production. 
• Suspected herbicide-resistant weeds may be identified by these indicators: 
• Failure to control a weed species normally controlled by the herbicide at the dose applied, 
especially if control is achieved on adjacent weeds; 
• A spreading patch of non-controlled plants of a particular weed species; and 
• Surviving plants mixed with controlled individuals of the same species. 
 
Additionally, users should follow as many of the following herbicide resistance management practices as 
is practical: 
• Use a broad spectrum soil-applied herbicide with other sites of action as a foundation in a weed 
control program. 
• Utilize sequential applications of herbicides with alternative sites of action. 
• Rotate the use of this product with non-Group 2 or 14 herbicides. 
• Avoid making more than two applications Enlite and any other Group 2 or 14 herbicides within a 
single growing season unless mixed with an herbicide with a different site of action with an 
overlapping spectrum for the difficult-to-control weeds. 
• Incorporate non-chemical weed control practices, including mechanical cultivation, crop rotation, 
cover crops and weed-free crop seeds, as part of an integrated weed control program. 
• Use good agronomic principles that enhance crop development and crop competitiveness. 
• Thoroughly clean plant residues from equipment before leaving fields suspected to contain 
resistant weeds. 'Manage weeds in and around fields, during and after harvest to reduce weed 
seed production. 
• Manage weeds in and around fields, during and after harvest to reduce weed seed production. 
 
INTEGRATED PEST MANAGEMENT 
This product may be used as part of an Integrated Pest Management (IPM) program that can include 
biological, cultural, and genetic practices aimed at preventing economic pest damage. IPM principles and 
practices include field scouting or other detection methods, correct target pest identification, population

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 21 
 
 
monitoring, and treating when target pest populations reach locally determined action thresholds. Consult 
your state cooperative extension service, professional consultants or other qualified authorities to 
determine appropriate action treatment threshold levels for treating specific pest/crop systems in your 
area. 
 
MANDATORY SPRAY DRIFT MANAGEMENT 
Ground Boom Applications: 
• User must only apply with the release height recommended by the manufacturer, but not 
more than 3 feet above the ground or crop canopy. 
• Applicators must select nozzle and pressure that deliver medium or coarser droplets in 
accordance with American Society of Agricultural &Biological Engineers Standard 572 
(ASABE S572). 
• DO NOT apply when wind speeds exceed 15 mph at the application site. 
• DO NOT apply during temperature inversions 
 
Aerial Applications 
• DO NOT release spray at a height greater than 10 ft above the ground or vegetative 
canopy, unless a greater application height is necessary for pilot safety. 
• Applicators must select nozzle and pressure that deliver Medium or coarser 
droplets in accordance with the American Society of Agricultural & Biological 
Engineers Standard 641 (ASABE S641). 
• If the windspeed is 10 miles per hour or less, applicators must use ½ swath 
displacement upwind at the downwind edge of the field. When the windspeed is 
between 11-15 miles per hour, applicators must use ¾ swath displacement upwind 
at the downwind edge of the field. 
• DO NOT apply when wind speeds exceed 15 mph at the application site. If the 
windspeed is greater than 10 mph, the boom length must be 65% or less of the 
wingspan for fixed wing aircraft and 75% or less of the rotor diameter for 
helicopters. Otherwise, the boom length must be 75% or less of the wingspan for 
fixed-wing aircraft and 90% or less of the rotor diameter for helicopters. 
• DO NOT apply during temperature inversions. 
 
Boom-less Ground Applications 
• Applicators must select nozzle and pressure that deliver medium or coarser droplets in accordance 
with American Society of Agricultural &Biological Engineers Standard 572 (ASABE S572). 
• DO NOT apply when wind speeds exceed 15 mph at the application site. 
• DO NOT apply during temperature inversions. 
 
 
SPRAY DRIFT ADVISORIES 
 
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT. 
BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS. 
 
IMPORTANCE OF DROPLET SIZE 
 
An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide 
target pest control. While applying larger droplets will reduce spray drift, the potential for drift will be 
greater if applications are made improperly or under unfavorable environmental conditions.

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 22 
 
 
Controlling Droplet Size – Ground Boom 
 
• Volume - Increasing the spray volume so that larger droplets are produced will reduce spray drift. Use 
the highest practical spray volume for the application. If a greater spray volume is needed, consider 
using a nozzle with a higher flow rate. 
• Pressure - Use the lowest spray pressure recommended for the nozzle to produce the target spray 
volume and droplet size. 
• Spray Nozzle - Use a spray nozzle that is designed for the intended application. Consider 
using nozzles designed to reduce drift. 
 
Controlling Droplet Size – Aircraft 
 
• Adjust Nozzles - Follow nozzle manufacturers recommendations for setting up nozzles. 
Generally, to reduce fine droplets, nozzles should be oriented parallel with the airflow in flight. 
 
BOOM HEIGHT – Ground Boom 
Use the lowest boom height that is compatible with the spray nozzles that will provide uniform coverage. 
For ground equipment, the boom should remain level with the crop and have minimal bounce. 
 
RELEASE HEIGHT – Aircraft 
 
Higher release heights increase the potential for spray drift. When applying aerially to crops, DO NOT 
release spray at a height greater than 10 ft above the crop canopy, unless a greater application height 
is necessary for pilot safety. 
 
BOOM-LESS GROUND APPLICATIONS: 
Setting nozzles at the lowest effective height will help to reduce the potential for spray drift. 
 
HANDHELD TECHNOLOGY APPLICATIONS: 
Take precautions to minimize spray drift. 
 
SHIELDED SPRAYERS 
Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. 
Verify that the shields are not interfering with the uniform deposition of the spray on the target area. 
 
TEMPERATURE AND HUMIDITY 
When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation. 
 
TEMPERATURE INVERSIONS 
Drift potential is high during a temperature inversion. Temperature inversions are characterized by increasing 
temperature with altitude and are common on nights with limited cloud cover and light to no wind. The presence 
of an inversion can be indicated by ground fog or by the movement of smoke from a ground source or an aircraft 
smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) 
indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing. 
 
Avoid applications during temperature inversions. 
 
WIND 
 
Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND 
CONDITIONS. 
 
Applicators need to be familiar with local wind patterns and terrain that could affect spray drift.

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 23 
 
 
DRIFT CONTROL ADDITIVES 
Using product compatible drift control additives can reduce drift potential. When a drift control additive is 
used, read and carefully observe cautionary statements and all other information on the additive’s label. If 
using an additive that increases viscosity, ensure that the nozzles and other application equipment will 
function properly with a viscous spray solution. Preferred drift control additives have been certified by the 
Council of Producers & Distributors of Agrotechnology (CPDA). 
 
APPLICATION INFORMATION – ALL USES 
 
• Enlite herbicide is a dispersible granule formulation which readily disperses in water. 
• Enlite may be used in conventional, no-till, or conservation tillage soybean production. 
 
Application Rate Summary Table for Enlite: 
 
Rate of Enlite Pounds of Active 
Ingredient 
Chlorimuron ethyl 
Pounds of Active 
Ingredient 
Flumioxazin 
Pounds of Active 
Ingredient 
Thifensulfuron methyl 
2.8 oz 0.0049 0.0634 0.0154 
3.25 oz 0.0058 0.0736 0.0179 
4.25 oz 0.0076 0.0962 0.0234 
 
 
GEOGRAPHIC USE REGIONS 
 
The geographical use regions for Enlite are defined as follows: 
 
Northern Region: The states of Connecticut, Iowa (west of State Route 63 and north of I-80), Maine, 
Massachusetts, Minnesota, Nebraska (fields north of route 30 or west of Route 281), New Hampshire, 
New York (fields north of Interstate 90), Rhode Island, South Dakota, Vermont and Wisconsin (fields 
north of Interstate 90 between Lacrosse and Madison and fields north of Interstate 94 between Madison 
and Milwaukee). 
 
Central/Southern Region: The states of Arkansas, Delaware, Illinois, Indiana, Iowa (east of State Route 
63 or south of I-80), Kansas, Kentucky, Louisiana, Maryland, Michigan, Mississippi, Missouri, Nebraska 
(fields south of Route 30 and east of Route 281), New Jersey, New York (fields south of Interstate 90), 
Ohio, Oklahoma, Pennsylvania, Tennessee, Texas (fields east of Route 183), Virginia, West Virginia and 
Wisconsin (fields south of Interstate 90 between Lacrosse and Madison and fields south of Interstate 94 
between Madison and Milwaukee). 
 
ENLITE UNIT AREA PACKAGE –MULTI-PRODUCT DISPENSING SYSTEM 
When dispensed through a multi-product dispensing system, Enlite herbicide is available in a unit area 
package that is used at the rate of 2.8 - 4.25 ounces per acre per application. Each dispensed amount of 
product is designed for a specific spray load, acreage, and use rate. After opening the Enlite unit area 
package, you must completely empty the entire contents into the spray tank. 
 
APPLICATION TIMING 
Enlite may be applied any time from fall through spring, up to 3 days after planting and prior to soybean 
emergence. 
DO NOT apply Enlite to cracking soybeans or after the soybean crop has emerged as severe injury or 
death of the crop will occur. 
PLANNED SEQUENTIAL PROGRAMS 
For season-long control in soybeans, follow Enlite with sequential programs based on the targeted 
weeds. Where appropriate, and following guidance provided by labeling, use chlorimuron ethyl in a 
planned sequential application program for enhanced broadleaf and sedge control. 
To ensure maximal rotational flexibility when considering a sequential program of Enlite followed by other

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 24 
 
 
herbicides containing chlorimuron ethyl, carefully consider: the soil pH, the specifications below, and the 
Rotational Crop Guidelines in this label. 
For glyphosate-resistant soybeans, Enlite can be followed by an in-crop application of a glyphosate 
product registered for this type of application with appropriate tank mix partners and adjuvant products. 
For glufosinate- resistant soybeans, Enlite can be followed by an in-crop application of a glufosinate 
containing product registered for this type of application with appropriate tank mix partners and adjuvant 
products. 
Read and follow all label directions and precautions for use of the respective sequential partner before 
using in a sequential program. Follow the most restrictive labeling. Consult a local Corteva Agriscience 
representative; fact sheets or technical bulletins for additional information. 
 
WEEDS CONTROLLED 
 
Fall or Spring Burndown of Emerged Weeds 
 
Apply Enlite when weeds are young and actively growing. Applications made to weeds larger than the 
indicated sizes, or to weeds under stress, may result in unsatisfactory control. 
For best results, apply to annual broadleaf weeds that are up to 3 inches in height or diameter and to 
perennial broadleaf weeds that are up to 6 inches in height or diameter. 
 
For the best burndown results, the addition of 2,4-D LVE is advised, and is required for control of some 
weeds. 
 
When used for burndown, Enlite is rainfast after 1 hour. 
 
For burndown of larger annual grasses or broadleaf weeds exceeding 1-3”, or for burndown of weeds not 
listed, Enlite may be tankmixed with one or more of the following: 
 
tribenuron-methyl 
thifensulfuron-methyl + tribenuron methyl 
dicamba 
glufosinate 
glyphosate 
paraquat 
saflufenacil* 
2,4-D (LVE) 
 
Please consult the label of specific tank mix partners for specific information on weeds controlled and 
plant back intervals following application. 
 
Reduced residual weed control may occur when burndown applications are made to fields where heavy 
crop and/or weed residue exist. 
 
*Refer to the saflufenacil label for restrictions when tank mixing with products containing Group 14/Group E 
herbicides. 
 
Use the higher rates of Enlite for improved and longer residual activity. Enlite herbicide, applied at 2.8 
to 4.25 ounces per acre, will burndown the following weeds. 
 
Burndown Control of Emerged Winter Annual, Perennial, and Summer Annual Weeds 
Annual knawel London rocket 
Annual sowthistle Marestail (horseweed)* 
Buckwheat, common, wild Mallow (common*, little)

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 25 
 
 
Bushy wallflower/Treacle mustard Marshelder 
Canola, volunteer* Miners lettuce 
Carolina geranium Mustard, black, Jim Hill, tansy, tumble, wild 
Chamomile, corn, false, wild Peas, volunteer 
Chickweed, common*, mouseear Prickly lettuce* 
Coast fiddleneck Prostrate knotweed 
Cockle, white Redmaids 
Cocklebur* Redroot pigweed 
Corn spurry Russian thistle* 
Cress (mouse-ear) Scentless chamomile/mayweed 
Curly dock Shepherd’s-purse 
Cutleaf evening primrose* Smallflower buttercup 
Dandelion* Smartweed, green, ladysthumb, Pennsylvania 
Deadnettle* Stinking mayweed/Dogfennel 
Field pennycress Sunflower* 
Flixweed Swinecress 
Groundsel, common, cress leaf (butterweed) Tarweed fiddleneck 
Henbit Velvetleaf 
Kochia * Wild garlic* 
Lambsquarters Wild radish* 
Lentils, volunteer 
 
*Enlite provides stand reduction or suppression of these weed species. For complete control of these weeds and 
others not listed above consider tank mixing Enlite with 2,4-D, dicamba, glyphosate, and/or other herbicides 
labeled for pre-plant burndown applications in soybeans. Please consult the label of specific tank mix partners for 
specific information on weeds controlled and plant back intervals following application. 
 
Chickweed Burndown 
 
For best results: add 0.08 - 0.25 ounces per acre of active ingredient tribenuron methyl, or 0.3 ounces per acre 
thifensulfuron methyl +tribenuron methyl, to Enlite for control of up to 6 inch common chickweed. For heavy 
matted infestations, use the higher end of the rate range. For lighter infestations of non-matted chickweed, use 
the lower end of the rate range. For other weeds controlled, refer to the labels. Refer to the labels for specific 
plant back interval information. 
 
Alternatively, metribuzin or glyphosate-containing products registered for soybeans may be added for 
chickweed burndown. 
 
Limitations 
 
DO NOT perform any tillage operations after fall applications or residual weed control will be reduced 
Abnormally warm or wet winters will reduce the length of weed control observed in the spring. 
 
Spray Additives 
 
Applications of Enlite used for burndown must include either a crop oil concentrate or a nonionic surfactant. Crop 
oil concentrate is the required adjuvant system unless tank mixing with a product that does not allow use of crop 
oil concentrate. Consult local Corteva Agriscience fact sheets, technical bulletins, and service policies prior to 
using other adjuvant systems. If another herbicide is tank mixed with Enlite, select adjuvants authorized for use 
with both products. Adjuvants must contain only EPA-exempt ingredients.

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 26 
 
 
Crop Oil Concentrate (COC) - Petroleum or Modified Seed Oil (MSO) 
 
• Apply at 1% v/v (1 gal per 100 gal spray solution) or 2% under arid conditions. 
• Oil adjuvants must contain at least 80% high quality, petroleum (mineral) or modified vegetable 
seed oil with at least 15% surfactant emulsifiers. 
 
Nonionic Surfactant (NIS) 
• Apply at 0.25% v/v (1 qt per 100 gal spray solution) or 0.5% under arid conditions. 
• Surfactant products must contain at least 60% nonionic surfactant with a hydrophilic/lipophilic balance 
(HLB) greater than 12. 
 
Weeds Controlled - Preemergence 
When used according to this label, Enlite at 2.8 to 4.25 ounces per acre can provide preemergence 
control or suppression of the weeds listed below contributing to a clean seedbed at planting. Length of 
residual control depends on rate used, soil type and quality of activation. Lower rates are advised for 
planned sequential programs and higher rates are advised for full-season programs. 
 
Broadleaf Weeds - 2.8 to 4.25 ounces per acre 
 
Bristly Starbur* Nightshade: Eastern black, black, hairy 
Carolina geranium Nutsedge, yellow 
Carpetweed Pigweed: redroot, smooth, spiny, tumble 
Chickweed: common, mousear Prickly sida 
Copperleaf hornbeam* Puncturevine 
Dandelion Purslane, common 
Eclipta Radish, wild 
Evening primrose, cutleaf Redsmaids 
Florida pusley Russian thistle* 
Henbit Shepherd’s-purse 
Jimsonweed Smellmelon* 
Kochia Spurge, spotted 
Lambsquarters, common Waterhemp**, common, tall 
Mallow: Venice, little Wild buckwheat* 
Marestail Wormwood, biennial* 
Morningglory, smallflower 
 
Additional weeds controlled with Enlite at 3.5 to 4.25 ounces per acre: 
 
Amaranth (pigweed), Palmer** Mornin gglories, entire leaf, ivyleaf, pitted, tall 
Coffee Senna Poinsettia, wild 
Cocklebur* Ra gweed, common, giant* 
Croton, tropic Sicklepod* 
Florida Be
ggarweed Smartweed, Lad ysthumb, Pennsylvania 
Hemp Sesbania Velvetleaf 
 
*suppression only 
**A postemergence herbicide such as fomesafen or lactofen may be needed following a preemergence 
application of Enlite for adequate control in fields with heavy pressure. 
 
Grass Weeds*- 2.8 to 4.25 ounces per acre 
 
Barn
yardgrass Goose grass 
Bluegrass, annual Love grass, California 
Crabgrass, large Panicum, fall, Texas 
Foxtail, giant, yellow Si gnalgrass, broadleaf

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 27 
 
 
*Enlite provides suppression of all grass weeds listed above. 
 
For Season-long Grass Control 
 
Enlite may be followed as needed by an in-season application of another registered grass herbicide . Or 
in glyphosate resistant soybeans, Enlite may be followed with an in-season glyphosate product 
application. In glufosinate resistant soybeans, Enlite may be followed with an in-season glufosinate 
product application. 
 
Tank Mixes 
 
Other than chloroacetamide-containing products noted below, Enlite may be tank mixed with other 
products registered for use in soybeans. 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read 
and follow the applicable restrictions and limitations and directions for use on all product labels involved in 
tank mixing. Users must follow the most restrictive directions for use and precautionary statements of 
each product in the tank mixture. 
 
For additional preemerge broadleaf weed control, Enlite may be tank mixed with linuron, metribuzin, 
pendimethalin or pyroxasulfone based products. For additional grass control, Enlite may be tank mixed 
with pendimethalin, pyroxasulfone or clomazone. 
 
Enlite may be applied in tank mix combinations with full or reduced rates of other products provided: 
• The tank mix product is labeled for the same timing, method of application, adjuvants, and use 
restrictions as Enlite. ' The tank mix is not specifically prohibited on the label of the tank mix 
product. 
• The tank mix combination is compatible as determined by a “jar test” described in the TANK MIX 
COMPATIBILITY TESTING section below. 
 
Weed control and crop safety resulting from the use of tank mixtures not specifically noted on this label, 
or in separately published information, are the responsibility of the user. 
DO NOT apply Enlite within 14 days before or after an application of an organophosphate insecticide on 
any soybean variety that is not an sulfonylurea tolerant soybean variety, as severe crop injury may occur. 
 
Enlite can be applied in tank mixtures with organophosphate insecticides or at any time preceding or 
following an application of an organophosphate insecticide prior to emergence of any sulfonylurea 
tolerant soybean variety. Tank mixtures of Enlite plus organophosphate insecticides applied preplant or 
preemergence to sulfonylurea tolerant soybean varieties may result in minor transient crop response (i.e. 
stunting and/or chlorosis). 
 
DO NOT tank mix Enlite herbicide with acetochlor, alachlor, flufenacet, S-metolachlor or dimethenamid 
based products within 14 days of planting soybeans, unless soybeans are planted under no-till or 
minimum tillage conditions on wheat stubble or no-till field corn stubble. 
 
Tank Mix Compatibility Testing 
 
Perform a jar test prior to tank mixing to ensure compatibility of Enlite and other pesticides. Use a clear 
glass quart jar with lid and mix the tank mix ingredients in their relative proportions. Invert the jar 
containing the mixture several times and observe the mixture for approximately 1/2 hour. If the mixture 
balls-up, forms flakes, sludges, gels, oily film or layers, or other precipitates, it is not compatible. 
 
ROTATIONAL CROP GUIDELINES - ALL USES 
 
For all labeled Fall and Spring Enlite uses, including sequential applications with chlorimuron ethyl, follow

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 28 
 
 
these rotational guidelines. 
 
Crop rotation intervals noted in the table below are based on crops grown under favorable growing 
conditions. Crops grown under unfavorable environmental conditions, including drought, nutrient 
deficiency, high salts, disease and insect pressure may demonstrate reduced tolerance to crop protection 
chemicals. When deciding on a particular crop to replant in your fields, carefully consider your particular 
soil and other field conditions (see IMPORTANCE OF SOIL pH section of this label). 
 
• Important: Crops other than soybeans following an Enlite application can vary in their sensitivity 
to low concentrations of Enlite remaining in the soil. Rotational crop guidelines must be followed. 
 
Follow Recrop Interval 1 Central/Southern Region: 
 
• A maximum of 4.25 ounces per acre of Enlite was applied and can be followed by an application 
of chlorimuron ethyl with a sum total of chlorimuron ethyl not to exceed 0.25 ounces active 
ingredient per acre for the crop season (any soil pH). 
 
OR 
 
Follow Recrop Interval 2 Northern Region: 
 
• A maximum of 2.8 ounces per acre Enlite was applied during the use season (any soil pH). 
• The field has a soil pH 7.0 or less and a maximum of 4.25 ounces per acre Enlite was applied 
during the use season. 
• The field is located in the state of IA and the soil pH is 7.5 or less and a maximum of 4.25 ounces 
per acre Enlite was applied by July 15
th. 
 
Rotational Guidelines 
 
For all advised Fall and Spring Uses of Enlite, including sequentials with chlorimuron ethyl 
 
Enlite Crop Rotational Interval in Months 
 
Crop 
Interval 1 
Central/Southern Region 
Interval 2 
Northern Region 
So
ybeans 0 0 
Wheat 3 3 
Barley, Winter Rye 4 4 
Dry Beans, Kidney Beans2, Peas, Snap Beans 9 9 
Field Corn* 9 9 
Popcorn 9 2 15 
Sorghum 9 15 
Tobacco (transplant) 9 15 
Tomato (transplant) 9 15 
Peanuts 6 4 6 
Rice 9 4 9 
Cotton 9 9 
Alfalfa/Clover 12 3 10 
Oats 10 10 
Pasture Grasses 12 12 
Cabbage 18 18 
Canola (Rapeseed) 18 18 
Cucumber 18 1 92 
Flax 18 18 
Lentils 18 18

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 29 
 
 
Mustard 18 18 
Pumpkins 18 18 
Sunflower 18 1 9 
Sweet Corn 9 † 9 † 
Sweet potatoes/yams 30 3 30 
Watermelon 18 1 9 2 
Any crop not listed 30 30 
*The term “Field Corn” is defined to include only that corn grown for grain or silage or for seed corn relative to the Rotation al Crop 
Guidelines section of this label. 
1- Rotational crop intervals are for processing Sweet Corn varieties only. The rotational crop interval for other Sweet Corn varieties 
is 18 months. 
1 If use rate of Enlite is 2.8 ounces per acre then the recrop is 9 months. 
2 Rotational interval is 12 months if no tillage is performed. 
3 In the Southern states of Alabama (except the “Black Belt” where soil pH must be less than 7.0), Arkansas, Florida, Georgia, 
Kentucky, Louisiana, Missouri (Bootheel region only), Mississippi (except the “Black Belt” where soil pH must be less than 7.0), 
North Carolina, Oklahoma, South Carolina, Tennessee and Texas (fields east of Route 183) the recrop is 10 months. 
4 The rotational interval applies only to listed Southern States. In the Central states the listed rotational interval applies only if the 
Enlite use rate is 2.8 ounces per acre, otherwise the rotational interval is 15 months. 
 
APPLICATION EQUIPMENT 
 
SPRAY TANK PREPARATION 
 
It is important that spray equipment is clean and free of existing pesticide deposits before using Enlite. 
Follow the spray tank cleanout procedures specified on the label of product previously sprayed. If no 
cleanout procedure is provided, follow the cleanout procedure below for all application equipment. 
1. Thoroughly rinse sprayer, tanks, boom, and hoses with clean water. 
2. Partially fill the tank with water and add one of the cleaning agents listed in the SPRAYER 
CLEANUP section of this label. Complete filling the tank and flush the cleaning solution through the 
boom and hoses. Let stand for 15 minutes with agitation or recirculation and then drain the tank after 
flushing the hoses, boom, and nozzles. 
3. Thoroughly rinse sprayer, tanks, boom, and hoses with clean water. 
4. Follow label directions of the product previously sprayed for rinsate disposal. 
 
During an extended period where spraying or mixing equipment will be used to apply multiple loads of 
Enlite, at the end of each day of spraying partially fill the tank with fresh water, flush the boom and hoses 
and allow to sit overnight. 
 
A steam cleaning of aerial spray tanks is advised to dislodge any visible pesticide deposits. 
 
MIXING INSTRUCTIONS 
 
Fill tank 1/4 full with water. Start agitation system, add Enlite and continue adding water. Add separately 
each additional component of any tank mix while adding water. Continue agitation throughout. 
 
If poor mixing occurs with any component, premix the component with two parts water before adding to 
the spray tank. 
 
A fertilizer solution may be used in the spray mixture. Small quantities need to be tested for compatibility 
by the following procedures before full-scale mixing. 
 
1. Put 1 pint of fertilizer solution in a quart jar. 
2. Mix 2 teaspoons Enlite with 2 tablespoons of water; mix thoroughly and add to fertilizer solution. 
3. Close jar and shake well. 
4. If other herbicides are to be used in the mixture, premix 2 teaspoons of wettable powder or 1 
teaspoon of liquid with 2 tablespoons of water; add to Enlite/fertilizer solution mixture. 
5. Close jar and shake well.

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 30 
 
 
6. Watch mixture for several seconds; check again in 30 minutes. 
7. If mixture does not separate, foam, gel, or become lumpy, it may be used. 
8. Mixing ability may be improved by adding compatibility agents. 
Provided the above procedure shows the mixture to be compatible, prepare the tank mixture as follows: 
Add the fertilizer solution to the spray tank first, with the agitator running, add the required amount of 
Enlite and thoroughly mix. For tank mixtures with other herbicides, follow directions above. For tank 
mixtures with other herbicides, all applicable directions, restrictions and precautions for the additional 
herbicides are also to be followed. 
 
Use Enlite spray preparations the same day as mixed or product degradation may occur. Thoroughly 
reagitate and remix before using, if allowed to settle. When tank mixing with other herbicides, all 
applicable directions, restrictions and precautions for the additional herbicides are also to be followed. 
 
SPRAYER CLEANUP 
 
To avoid subsequent injury to desirable crops, thoroughly clean all mixing and spray equipment 
immediately following applications of Enlite as follows: 
 
Spray equipment, including mixing vessels and nurse tanks, must be cleaned each day following Enlite 
application. After Enlite is applied, the following steps need to be used to clean the spray equipment: 
 
1. Drain tank and thoroughly hose down the interior surfaces of the tank. Flush tank, boom, and 
hoses with clean water for a minimum of 5 minutes. 
2. Partially fill the tank with water and add one gallon of household ammonia* (containing 3% active) 
for every 100 gallons of water. Complete filling the tank with water, then flush the cleaning 
solution through the boom, hoses, and nozzles. Add more water to completely fill the tank and 
allow to agitate or recirculate for at least 15 minutes. Again, flush the boom, hoses and nozzles, 
and drain the tank. 
3. Remove the nozzles, screens and the end caps of sprayer booms and clean separately in a 
bucket containing water and the cleaning agent. 
4. Repeat Step 2. 
5. Thoroughly rinse the tank with clean water for a minimum of 5 minutes, flushing water through the 
boom and hoses. 
6. To enhance removal of flumioxazin from the spray system before spraying susceptible crops, 
follow the above clean-out steps with ammonia, then add a tank cleaner such as “Valent Tank 
Cleaner” from Valent U.S.A. Corporation, and allow the cleaning solution to remain in the 
pressurized spray system (spray tank, hoses and boom) overnight before flushing the system for 
a minimum of 15 minutes. If using "Valent Tank Cleaner" follow use instructions and personal 
protective equipment (PPE) instructions as found on the "Valent Tank Cleaner" label. 
 
*Equivalent amounts of an alternate strength ammonia solution or a tank cleaner advised in 
separately published company bulletins may be used. 
 
THE IMPORTANCE OF SOIL PH 
 
Soil pH varies greatly, even within the same field. pH variations as much as 2 pH units are common. 
Composite soil samples taken across an entire field, such as those samples taken for soil fertility 
specifications, may not detect areas of high pH. Sub-sampling is advised for areas likely to have pH 
values higher than the field average. The following is a non-inclusive list of potential high pH areas where 
subsampling is advised. 
 
• Where different soil types are evident within a field, sample soil types separately. 
• Where conditions vary within a field, sample areas separately, including: 
- areas bordered by limestone gravel roads,

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 31 
 
 
- river bottoms subject to flooding, 
- low areas in hardpan soils where evaporative ponds 
may occur, 
- eroded hillsides, 
- along drain tile lines, and 
- areas where drainage ditch spoil has been spread. 
• Where lime has not been deeply incorporated, soil may exhibit significantly higher pH values in 
the upper 3 inches of soil. Composite soil samples taken at a 6-8 inch depth may not reflect the 
elevated pH near the surface. In these cases, shallow sampling, the upper 3 inches, is advised. 
 
Determine soil pH by laboratory analysis using a 1:1 soil:water suspension. 
 
STORAGE AND DISPOSAL 
Pesticide Storage: Store product in original container only. DO NOT contaminate water, other 
pesticides, fertilizer, food or feed in storage. Store in a cool, dry place. 
 
Pesticide Disposal: DO NOT contaminate water, food, or feed by disposal. Waste resulting from 
the use of this product must be disposed of on site or at an approved waste disposal facility. 
 
CONTAINER HANDLING: Refer to the Net Contents section of this product’s labeling for 
the applicable “Nonrefillable Container” or “Refillable Container” designation. 
 
Nonrefillable Plastic and Metal Containers (Capacity Equal to or Less Than 50 Pounds): 
Nonrefillable container. DO NOT reuse or refill this container. Triple rinse container (or equivalent) 
promptly after emptying. Triple rinse as follows: Empty the remaining contents into application 
equipment or a mix tank. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour 
rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 
seconds after the flow begins to drip. Repeat this procedure two more times. Then, for Plastic 
Containers, offer for recycling if available or puncture and dispose of in a sanitary landfill, or by 
incineration. DO NOT burn, unless allowed by state and local ordinances. For Metal Containers, 
offer for recycling if available or reconditioning if appropriate, or puncture and dispose of in a sanitary 
landfill, or by other procedures approved by state and local authorities. 
 
Nonrefillable Plastic and Metal Containers (Capacity Greater Than 50 Pounds): Nonrefillable 
container. DO NOT reuse or refill this container. Triple rinse container (or equivalent) promptly after 
emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix 
tank. Fill the container 1/4 full with water. Replace and tighten closures. Tip container on its side and 
roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on 
its end and tip it back and forth several times. Turn the container over onto its other end and tip it back 
and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for 
later use or disposal. Repeat this procedure two more times. Then, for Plastic Containers, offer for 
recycling if available or puncture and dispose of in a sanitary landfill, or by incineration. DO NOT burn, 
unless allowed by state and local ordinances. For Metal Containers, offer for recycling if available or 
reconditioning if appropriate, or puncture and dispose of in a sanitary landfill, or by other procedures 
approved by state and local authorities. 
 
Nonrefillable Plastic and Metal Containers, e.g., Intermediate Bulk Containers [IBC] (Size or 
Shape Too Large to be Tipped, Rolled or Turned Upside Down): Nonrefillable container. DO NOT 
reuse or refill this container. Clean container promptly after emptying the contents from this container 
into application equipment or mix tank and before final disposal using the following pressure rinsing 
procedure. Insert a lance fitted with a suitable tank cleaning nozzle into the container and ensure that 
the water spray thoroughly covers the top, bottom and all sides inside the container. The nozzle 
manufacturer generally provides instructions for the appropriate spray pressure, spray duration and/or 
spray volume. If the manufacturer’s instructions are not available, pressure rinse the container for at 
least 60 seconds using a minimum pressure of 30 PSI with a minimum rinse volume of 10% of the 
container volume. Drain, pour or pump rinsate into application equipment or rinsate collection system. 
Repeat this pressure rinsing procedure two more times. Then, for Plastic Containers, offer for recycling if 
available or puncture and dispose of in a sanitary landfill, or by incineration. For Metal Containers, offer 
for recycling if available or reconditioning if appropriate, or puncture and dispose of in a sanitary landfill, 
or by other procedures approved by state and local authorities.

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 32 
 
 
Nonrefillable Paper or Plastic Bags, Fiber Sacks including Flexible Intermediate Bulk 
Containers (FIBC) or Fiber Drums With Liners: Nonrefillable container. DO NOT reuse or refill this 
container. Completely empty paper or plastic bag, fiber sack or drum liner by shaking and tapping 
sides and bottom to loosen clinging particles. Empty residue into application or manufacturing 
equipment. Then offer for recycling if available or dispose of empty paper or plastic bag, fiber sack or 
fiber drum and liner in a sanitary landfill, or by incineration. DO NOT burn, unless allowed by state 
and local ordinances. 
 
Refillable Fiber Drums With Liners: Refillable container (fiber drum only). Refilling Fiber Drum: Refill 
this fiber drum with Enlite herbicide containing chlorimuron ethyl, flumioxazin, and thifensulfuron 
methyl. DO NOT reuse this fiber drum for any other purpose. Cleaning before refilling is the 
responsibility of the refiller. 
 
Completely empty liner by shaking and tapping sides and bottom to loosen clinging particles. Empty 
residue into application or manufacturing equipment. Disposing of Fiber Drum and/or Liner: DO NOT 
reuse this fiber drum for any other purpose other than refilling (see preceding). Cleaning the container 
(liner and/or fiber drum) before final disposal is the responsibility of the person disposing of the 
container. Offer the liner for recycling if available or dispose of liner in a sanitary landfill, or by 
incineration. DO NOT burn, unless allowed by state and local ordinances. If drum is contaminated and 
cannot be reused, dispose of it in the manner required for its liner. To clean the fiber drum before final 
disposal, completely empty the fiber drum by shaking and tapping sides and bottom to loosen clinging 
particles. Empty residue into application or manufacturing equipment. Then offer the fiber drum for 
recycling if available or dispose of in a sanitary landfill, or by incineration. DO NOT burn, unless 
allowed by state and local ordinances. 
 
All Other Refillable Containers: Refillable container. Refilling Container: Refill this container with 
Enlite herbicide containing chlorimuron ethyl, flumioxazin, and thifensulfuron methyl only. DO NOT 
reuse this container for any other purpose. Cleaning before refilling is the responsibility of the refiller. 
Prior to refilling, inspect carefully for damage such as cracks, punctures, abrasions, worn out threads 
and closure devices. If damage is found, DO NOT use the container, contact Corteva Agriscience at 
the number below for instructions. Check for leaks after refilling and before transporting. If leaks are 
found, DO NOT reuse or transport container, contact Corteva Agriscience at the number below for 
instructions. Disposing of Container: DO NOT reuse this container for any other purpose other than 
refilling (see preceding). Cleaning the container before final disposal is the responsibility of the person 
disposing of the container. To clean the container before final disposal, use the following pressure 
rinsing procedure. Insert a lance fitted with a suitable tank cleaning nozzle into the container and 
ensure that the water spray thoroughly covers the top, bottom and all sides inside the container. The 
nozzle manufacturer generally provides instructions for the appropriate spray pressure, spray duration 
and/or spray volume. If the manufacturer’s instructions are not available, pressure rinse the container 
for at least 60 seconds using a minimum pressure of 30 PSI with a minimum rinse volume of 10% of 
the container volume. Drain, pour or pump rinsate into application equipment or rinsate collection 
system. Repeat this pressure rinsing procedure two more times. Then, for Plastic Containers, offer for 
recycling if available or puncture and dispose of in a sanitary landfill, or by incineration. DO NOT burn, 
unless allowed by state and local ordinances. For Metal Containers, offer for recycling if available or 
reconditioning if appropriate, or puncture and dispose of in a sanitary landfill, or by other procedures 
a
pproved by state and local authorities. 
 
"Valent Tank Cleaner" is a trademark of Valent U.S.A. Corporation 
 
 
 Terms and Conditions of Use 
If terms of the following Warranty Disclaimer, Inherent Risks of Use, and Limitation of Remedies are not 
acceptable, return unopened package at once to the seller for a full refund of purchase price paid. To the 
extent consistent with applicable law, use by the buyer or any other user constitutes acceptance of the 
terms under Warranty Disclaimer, Inherent Risks of Use and Limitations of Remedies. 
 
 Warranty Disclaimer 
Corteva Agriscience warrants that this product conforms to the chemical description on the label and is 
reasonably fit for the purposes stated on the label when used in strict accordance with the directions for 
use, subject to the inherent risks set forth below. To the extent consistent with applicable law, Corteva

G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 33 
 
 
Agriscience MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER EXPRESS OR IMPLIED WARRANTY. 
 
 Inherent Risks of Use 
It is impossible to eliminate all risks associated with use of this product. Plant injury, lack of performance, 
or other unintended consequences may result because of such factors as use of the product contrary to 
label instructions (including conditions noted on the label, such as unfavorable temperatures, soil 
conditions, etc.), abnormal conditions (such as excessive rainfall, drought, tornadoes, hurricanes), 
presence of other materials, the manner of application or other factors, all of which are beyond the control 
of Corteva Agriscience or the seller. Corteva Agriscience will not be responsible for losses or damages 
resulting from the use of this product in any manner not specifically directed by Corteva Agriscience. To 
the extent consistent with applicable law, all such risks associated with non-directed use shall be 
assumed by buyer and/or user. 
 
 Limitation of Remedies 
To the extent consistent with applicable law, the exclusive remedy for losses or damages resulting from 
this product (including claims based on contract, negligence, tort, strict liability, or other legal theories), 
shall be limited to, at Corteva Agriscience’s election, one of the following: 
 
1. Refund of purchase price paid by buyer or user for product bought, or 
2. Replacement of product used. 
 
To the extent consistent with applicable law, Corteva Agriscience shall not be liable for losses or 
damages resulting from handling or use of this product unless Corteva Agriscience is promptly notified of 
such loss or damage in writing. To the extent consistent with applicable law, in no case shall Corteva 
Agriscience be liable for consequential, incidental or special damages or losses. 
 
The terms of the Warranty Disclaimer, Inherent Risks of Use, and Limitation of Remedies cannot be 
varied by any written or verbal statements or agreements. No employee or sales agent of Corteva 
Agriscience or the seller is authorized to vary or exceed the terms of the Warranty Disclaimer or this 
Limitation of Remedies in any manner. 
 
For product information call: 1-800-258-3033 
 
Produced for 
Corteva Agriscience LLC 
9330 Zionsville Road 
Indianapolis, IN 46268 
 
™
®Trademarks of Corteva Agriscience and its affiliated companies 
 
EPA accepted __/__/__