crop-chem-docs/corpus/epa_ppls/228-677.md

# ETI 114 02 H

- EPA Reg No: **228-677**
- Registrant: NUFARM AMERICAS, INC.
- Signal word: Warning
- Active ingredients: Nicosulfuron (4.2%)
- Label accepted: 2008-07-21
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/079676-00077-20080721.pdf

---
o 7 /~ 1/ ()c)()8 
U.S. ENVIRONMENTAL PROTECTION AGENCY 
Office of Pesticide Programs 
Registration Division (7S0SC) 
1200 Pennsylvania Ave., N.W. 
Washington, D.C. 20460 
NOTICE OF PESTICIDE: 
....x. Registration 
(under FIFRA, as amended) 
_ Reregistration 
Name and Address of Registrant (include ZIP Code): 
Etriga 
C/O Pyxis Regulatory Consulting. Inc 
4110 136th Street, NW 
Gig Harbor, 98332 
EPA Reg. Number: Date of Issuance: 
79676-77 JUL 21 2008 
Term of Issuance: 
Conditional 
Name of Pesticide Product: 
ETl114 02 H 
On the basis of information furnished by the registrant, the above named pesticide is hereby registered/reregistered under the Federal Insecticide, Fungicide 
and Rodenticide Act. 
Registration is in no way to be construed as an endorsement or recommendation of this product by the Agency. In order to protect health and the 
environment, the Administrator, on his motion, may at any time suspend or cancel the registration of a pesticide in accordance with the Act. The acceptance 
of any name in connection with the registration of a product under this Act is not to be construed as giving the registrant a right to exclusive use of the name 
or to its use if it has been covered by others. 
This product is conditionally registered in accordance with FIFRA section 3( c )(7)(A) provided that 
you: 
1. Submit the results of the one-year storage stability (830.6317) and corrosion characteristics 
(830.6320) studies once they are available. . 
2. Submit and/or cite all data required for registration/reregistration of your product when the Agency 
requires all registrants of similar products to submit such data. 
3. Make the labeling changes listed below before you release the product for shipment: 
a. Add the phrase "EPA Registration No. 79676-77" 
Il 
signfur of Approvin 
J 
lcial: 
(~ 
J a;n'il A. T i, Product Manager (25) 
,I'lerl/tcide Branch, Registration Division (7505P) 
ryorm857o-6 
Date:

( 
Page 2 
EPA Reg. No. 79676-77 
b. Remove the statement "Wash thoroughly with soap and water after handling after handling and before 
eating, drinking, chewing gum, or using tobacco" from the Precautionary Statements, Hazards to 
Humans and Animals. Similar statements appear in the User Safety Recommendations. 
c. On page 3, under "Rate", revise the last sentence in the second paragraph to read "For more 
information, refer to Table 2, under "ADDITIONAL INSTRUCTIONS." 
d. On page 6, revise the heading "Additional RecommendationslRecommendations for Specific Weed 
Problems", to read "Additional Instructions/Instructions for Specific Weed Problems." 
e. On page 7, revise the three bullets under the fourth paragraph to read as follows: 
.;Do not tank-mix ETI 11402 H with Basagran and Laddok or severe crop injury may occur. 
-Do not tank-mix ETI 11402 H with products containing 2,.4-D as severe grass control antagonism may 
occur.-
-Do not tank-mix E:TI 11402 H with foliar-applied organophosate insecticides (e.g. Lorsban, malathion, 
parathion, etc) as severe crop injury may occur.-
3. Submit one (1) copy of your final printed labeling before you release the product for shipment. 
If these conditions are not complied with, the registration will be subject to cancellation in accordance 
with FIFRA section 6 ( e). Your release for shipment of the product constitutes acceptance of these 
conditions. 
A stamped copy oflabeling in enclosed for your records. 
Enclosures

( ( 
ETI114 02 H 
A soluble concentrate for use on corn 
ACCRlfVl'ED 
ACTIVE INGREDIENT: w~th COMME~n's . 
. Kill EPA Letter' D.at~Y Weight 
Nicosulfuron 
2-[[(4,6-dimethoxypyrimidin-2-yl)aminocarbonyl]aminosulfonyl]- JUL 2 1 2008 
N,N-dimethyl-3-pyridinecarboxamide ... · ......................................... ;Ullide-l'.~he·~e;roH~~fw~·····.4·2% 
OTHER INGREDIENTS: ................................................................ iF~eDl!e,.IU'..d.~~tllr&;§.e-AIB~ .... 95.8% 
TOTAL: ............................................................................................ ~ .. ~~~~A:'.~.l'Mt;§~ .. 1 00.0% 
ETI 11402 H contains 0.33 Ibs. of active ingredient per gallon. reg!8jU] (0- TzA ~ N.:: 
KEEP OUT OF REACH OF CHILDREN 
CAUTION 
Si usted no entiendela etiqueta, busque a alguien para que se la explique a usted en detalle. 
(If you do not understand this label, find someone to explain it to you in detail.) 
FIRST AID 
If on skin or • Take off contaminated clothing. 
clothing: • Rinse skin immediately with plenty of water for 15-20 minutes. 
• Call a poison control center or doctor for treatment advice. 
HOT LINE NUMBER 
Have the product container or label with you when calling a poison control center or doctor, or going for treatment. 
You may also contact 1-800-424-9300 for emergency medical treatment information. 
PRECAUTIONARY STATEMENTS 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
CAUTION 
Avoid contact with skin or clothing. Wash thoroughly with soap and water after handling and before 
eating, drinking, chewing gum, or using tobacco. Prolonged or frequently repeated skin contact may 
cause allergic reactions in some individuals. -
PERSONAL PROTECTIVE EQUIPMENT (PPE) 
Some materials that are chemical resistant to this product are listed below. If you want more options 
follow the instructions for Category A on the EPA chemical-resistance category selection chart. 
Applicators and other handlers must wear: 
• Long-sleeved shirt and long pants 
• Chemical-resistant gloves Category A (such as butyl rubber, natural rubber, neoprene rubber, or 
nitrile rubber), all ~ 14 mils 
• Shoes plus socks , 
L <. ( I.- [ 
Follow manufacturer's instruction for cleaning/maintaining PPE. If no such instruct1-:::~s fer wa&hables 
exist, use detergent and hot water. Keep and wash PPE separately from other laundry., '. : 
EPA Reg. No. 79676-
Manufactured for: 
Etigra® 
501 Cascade Pointe Lane, Suite 103 
Cary, NC 27513 
www.etigra.com 
\ r ' l <. I l t 1 r \ 
EPA~€st~ No. l 
, , 
~----------------------------~~{", 
ETI 114 02 H contains nicosuHI,l"uhi the' 
active ingredient used in Accent®.: {' 
Net Contents: 
, , ,

( ( 
USER SAFETY RECOMMENDATIONS 
Users should: 
• ' Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet. 
• Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean 
clothing. 
ENVIRONMENTAL HAZARDS 
Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the 
mean high water mark. Do not contaminate water when disposing of equipment rinsewater. Do not apply 
where/when conditions could favor runoff. 
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Do not apply 
this product in a way that will contact workers or other persons, either directly or through drift. Only 
protected handlers may be in the area during application. For any requirements specific to your State or 
Tribe, consult the agency responsible for pesticide regulation. Read the entire label before using this 
product. 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard 40 CFR 
Part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, 
nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, 
decontamination, notification, and emergency assistance. It also contains specific instructions and 
exceptions pertaining to the statements on this label about personal protective equipment (PPE), and 
restricted-entry intervals. The reiquirements in this box only apply to uses of this product that are covered 
by the Worker Protection Standard. 
Do not enter or allow worker entry into treated areas during the restricted-entry interval.(REI) of 4 hours. 
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and 
that involves contact with anything that has been treated, such as plants, soil, or water, is: ' 
• Coveralls 
• Chemical-resistant gloves Category A (such as butyl rubber, natural rubber, neoprene rubber, or 
nitrile rubber), all ~ 14 mils 
• Shoes plus socks 
ETI 11402 H should be used only in accordance with directions on this label or in supplemental Etigra 
publications. Etigra will not be responsible for losses or damage resulting from use of this product in any 
manner not speCifically approved by Etigra. 
GENERAL INFORMATION 
ETI 114 02 H is a suspension concentrate used at a rate of 6-24 fluid ounces per acre for selective 
postemergence grass weed control in field corn grown for seed or grain, popcorn and sweet corn. 
Do not make more than two applications of ETI 114 02 H per cropping season. The combined dosage of 
sequential applications cannot exceed 24 fluid ounces per acre of ETI 11402 H. 
WHEN TO APPLY - NORMAL PLANNED USE 
Research indicates best results are obtained when applications are made early postemergence when 
corn and weeds are small. Target applications to corn that is less than 12" tall for best overall 
performance. ETI 11402 H may be broadcast to corn that is either up to. 20" tall (free standing) or that is 
exhibiting up to and including 6 leaf collars (V6), whichever is more restrictive. 
TIMING TO WEEDS 
ETI114 02 H should be applied when grasses are young and actively growing but before they exceed the 
sizes indicated in Table 1. Heavy infestations of weeds should be treated before they become too 
competitive with the crop, especially when fertility and / or soil moisture are limited. A'second application 
or a timely cultivation is required for later-emerging weeds. Unsatisfactory control may result if 
applications are made to weeds under stress or to weeds larger than the size indicated in this label. 
Refer to the LATE OR RESCUE APPLICATIONS section for more information. 
2

( ( 
LATE OR RESCUE APPLICATIONS 
ETI 114 02 H may be applied as a rescue treatment for the control of escaped grasses in field corn, or as 
a directed postemergence application on corn that has more than 6 collars or that is taller than 20" 
(whichever occurs first). 
• For corn that is 20" - 36" tall: Apply ETI 114 02 H using drop nozzles ONLY and avoid spraying 
into the whorl of cornstalks. 
• Do NOT apply to crop that is taller than 36" or that exhibits 10 or more collars (V10), whichever is 
most restrictive. 
Control for applications made to weeds larger than those listed on this label may vary from suppression to 
complete control with the level of control depending on the weed species, stage of growth, and 
environmental conditions. 
Because rescue applications are typically unplanned, choices must be made between the risks that arise 
from applications made outside of the optimal timeframe for ETI. 114 02 H use and the effects of harvest 
complications and lor season long grass competition. The risks from improperly timed ETI 11402 H use 
that should be considered include, but are not limited to: 
Yield Loss Due to Competition: Research indicates that corn yields may be reduced by competition from 
foxtail exceeding 4 inches in height. The risk of yield losses due to prolonged competition with the crop 
even though control may be acceptable may increase if applications are made to foxtail and other annual 
grasses that exceed the size stated on the label. 
Incomplete Control of Grasses Beyond Labeled Size: Reduced corn yield may result when applications 
are made to grasses that exceed the labeled sizes due to reduced control of the grasses. 
Incomplete Grass Control Due To Herbicide· Stress: Reduced control of grasses under stress from 
previous herbicide applications may result due to the stressed grasses not be actively growing, therefore 
reducing susceptibility to ETI 114 02 H in rescue situations. 
Ear Malformation: The potential for ear malformation (pinching) increases when ETI 114 02 H is applied 
to corn that has 7 to 10 collars (V7 to V10). This risk may be greatly reduced, but not eliminated, by using 
drop nozzles properly adjusted so as to not apply ETI 11402 H into the corn whorl. 
RATE 
For weeds in the size ranges listed below, optimum control is obtained using 12 fluid ounces of ETI 114 
02 H per acre. Weeds exceeding the listed by up to 50% may be partially controlled with rates between 
12 and 24 fluid ounces of ETI 11402 H per acre. 
For limited control of certain small grass weeds, ETI 114 02 H may be applied at rates of 6-12 fluid 
ounces. For more information, refer to Table 2 under ADDITIONAL RECOMMEDATIONS. 
Due to drought or other environmental factors, grassy weeds may not reach the sizes listed below as they 
mature (more than 3 tillers). Because weed sensitivity to ETI 114 02 H decreases as weeds mature, 
stressed weeds that are maturing rapidly should be treated before they reach the stages listed below. 
When applied as directed, 12 fluid ounces of ETI114 02 H per acre will control the following weeds: 
Table 1. Weeds controlled with 12 fluid ounces ETI114 02 H 
Maximum Height or 
Grasses Diameter 
(Inches) 
Barnyardgrass 4 
Broadleaf signalgrass 2 
FoxtailsJbristly, giant, green, yellow) 4 
Itchgrass 6 
Johnsongrass 
Seedling 12 
Rhizome 18 
Panicum (Texas, Browntop) 3 
Fall 4 
3

( 
Maximum Height or 
Grasses Diameter 
(Inches) 
Quackgrass T 10 
Ryegrass (Italian, perennial) 6 
Sandbur (field, longspine) T 3 
Shattercane 12 
Sorghum almum 12 
Timothy 6 
Volunteer cereals (barley, oats, rye, 6+ 
triticale, wheat) " 
Wild Oats 4 
Wild proso millet 4 
Wirestem muhlyT 8 
Witchgrass 6 
Woolly Cupgrass T 4 
t Requires the use of the COC plus ammonium nitrogen fertilizer. Cultivation or re-treatment may be 
required. Refer to "FOR ADDITIONAL CONTROL OF LATER EMERGING GRASSES." 
:I: 10" in WA, OR, ID, and MT where the use of MSO adjuvants are preferred. See SPRAY ADJUVANTS. 
Maximum Height or 
Broadleaves Diameter 
(Inches) 
Burcucumber 3" 
Dandelion 6" 
Hemp dogbane 4" 
Jimsonweed 3" 
Morningglory (Ivyleaf, pitted) 3" 
tall 2" 
Pigweed (redroot, smooth) 4" 
PokeweedT 4" 
Smartweeds (Iadysthumb, PA) 4" 
Thistle, Canada T 4" 
t Suppression only 
Popcorn, Field Corn Grown for Seed and Sweet Com 
ETI 114 02 H may be applied to field corn grown for seed or popcorn that exhibits up to and including 5 
leaf-COllars (V5) or that is less than 20" tall (free-standing), whichever is most restrictive. Do NOT apply to 
corn that exhibits more than 5 leaf-collars (V5) or that is taller than 20" (whichever is more restrictive). 
Make either a broadcast application"or apply with drop nozzles. 
ETI 114 02 H has been tested on seed corn inbreds or yellow popcorn hybrids for sensitivity by many 
seed companies and excellent safety has been reported. Unless specifically approved by the seed 
company, do NOT apply ETI 114 02 H to any white popcorn inbred or white popcorn hybrid (including 
"White Dynamite" popcorn). " 
A single application (per year) of ETI 114 02 H may be applied to certain sweet corn hybrids grown for 
fresh markets or under contract for processing. Apply broadcast or with drop nozzles (post~directed) on 
sweet corn up to 12 inches tall or up to and including 5 leaf-collars (V5). For sweet corn 12-18 inches tall, 
apply using drop nozzles only. Do NOT apply to sweet corn taller than 18 inches or that has 6 or more 
leaf-collars (V6). 
Because not all sweet corn hybrids have been tested for crop tolerance and hybrid sensitivity to ETI 114 
02 H is highly variable, contact your Etigra Sales Representative for information on local sweet corn 
hybrids that have been evaluated with ETI 11402 H. 
Additionally, because not all seed corn inbreds, popcorn or sweet corn hybrids have been tested, nor 
does Etigra have access to all seed company data, Etigra is not responsible for any crop injury ariSing 
from the use of ETI114 02 H on field corn grown for seed, popcorn or sweet corn. 
Be sure to check tank mix partner label(s) for tolerances and instructions for use when tank mixing. 
4

( ( 
When applying ETI 11402 H to popcorn, sweet corn or field corn grown for seed that has been previously 
treated with a soil insecticide, be sure to refer to the SOIL INSECTICIDE INTERACTION INFORMATION 
section for additional information. ' ' 
Spray Adjuvants 
ETI 114 02 H contains a proprietary adjuvant system that aids in the control of many difficult weed 
species. In certain arid climates, the use of additional adjuvants may be required for optimal weed 
control. In addition~ an ammonium nitrogen fertilizer must be used unless specifically prohibited by tank 
mix partner labeling. Prior to using other adjuvant systems, consult your local Etigra representative. If 
another herbicide is tank mixed with ETI 114 02 H, be sure to select adjuvants authorized for use with 
both products. Products must contain only EPA-exempt ingredients (40 CFR 1001). 
Crop Oil Concentrate (CO C)- Petroleum or Modified Seed Oil (MSO) 
• Apply up to 1 % v/v (1 gallon per 100 gallons spray solution) under arid conditions. 
• If specifically noted on adjuvant product labeling, MSO adjuvants may be used at 0.5% v/v (0.5 
gallons per 100 gallons spray solution). 
• A COC adjuvant must contain at least 80% high quality petroleum (mineral) or modified vegetable 
seed oil with at least 15% surfactant emulsifiers. 
Nonionic Surfactant (NIS) 
• Apply up to 0.25% vlv (1 quart per 100 gallons spray solution) under arid conditions. 
• Use a surfactant with a hydrophilic / lipophilic balance (HLB) greater than 12. 
Ammonium Nitrogen Fertilizer 
• Use 2 pounds per acre of a spray-grade ammonium sulfate (AMS) or 2 quarts per acre of high­
quality urea ammonium nitrate (UAN) such as 2,8%N or 32% N. Under arid conditions, use 4 
quarts per acre UAN or 4 pounds per ,acre AMS. 
• Do NOT use liquid nitrogen fertilizer as the total carrier solution. 
Special Adjuvant Types 
• Combination adjuvant products may be' used at doses that provide the required amount of NIS, 
COC, MSO and/or ammonium nitrogen fertilizer. Consult product literature for use rates and 
restrictions. 
• Other adjuvant types may be used if they provide the same functionality and have been evaluated 
and approved by Etigra. 
MIXING INSTRUCTIONS 
1. Fill the tank y.. to 1/3 full of water. 
2. 'Begin agitation and add the labeled amount of ETI 11402 H. 
3. Continue agitation until the ETI 11402 H is fully dispersed (at least 5 minutes). 
4. Once fully dispersed, maintain agitation and continue filling the tank with water. As the tank is 
filling, add the required spray adjuvants (crop oil concentrate; nonionic surfactant, or ammonium 
nitrogen fertilizer). Before adding any other material (other than spray adjuvants), be sure to 
thoroughly mix the ETI 11402 H with the water. 
5. Settling will occur if the mixture is not continuously agitated. Thoroughly re-agitate prior to using if 
settling occurs. 
6. To avoid product degradation, apply ETI 114 02 H spray mixture within 24 hours of mixing. 
NOTE: If ETI 11402 H and a tank mix partner are to be applied in multiple loads, pre-slurry the ETI 114 
02 H in clean water prior to adding to the tank. This will prevent the tank mix partner from interfering with 
the dissolution of the ETI 11402 H. 
WHEN TO APPLY- SEQUENTIAL APPLICATIONS FOLLOWING REDUCED RATES OF 
PREEMERGENCE HERBICIDES . 
ETI 114 02 H may be used in a planned postemergence weed control program in corn as a sequential 
application following a reduced rate of a preemergemce herbicide. Prior to corn emergence, apply a 
reduced rate of preemergence grass herbicide and then follow with a postemergence application of ETI 
11402H. 
,Products such as DuPont CINCH®, CINCH® ATZ, Balance® Pro, Axiom®, Dual® II Magnum, Surpass®, 
Outlook® and Harness® Xtra may be applied at rates as low as y.. to % of the full labeled use rate, 
5

( c 
followed with a sequential postemergence application of ETI 114 02 H. Prior to applying ETI 114 02 H, 
refer to the preemergence grass herbicide label for application information, rotational crop guidelines, 
cautionary statements and use restrictions. 
NOTE: Do NOT apply ETI 114 02 H to corn injured by previous herbicide applications made to the 
current or preceding crop. 
TANK MIX APPLICATIONS - For additional control of broadleaf weeds 
For additional control of broad leaf weeds, ETI 114 02 H may be tank mixed with full or reduced rates of 
many herbicides registered for postemergen'ce application in corn. Refer to the tank mix partner label for 
weeds controlled, adjuvant and crop rotation information, precautions and use restrictions. When tank 
mixing, be sure to apply the most restrictive language on either label. 
See Spray Adjuvants section of this label for adjuvant rate recommendation. 
ADDITIONAL RECOMMENDATIONS I RECOMMENDATIONS FOR SPECIFIC WEED PROBLEMS 
Reduced Rates of ETI114 02 H 
For control of the small grass weeds noted in the table below, ETI 11402 H may be applied at a rate of 6-
12 fluid ounces. When applying reduced rates of ETI 114 02 H, always use a crop oil concentrate plus 
ammonium nitrogen fertilizer. 
Table 2. Weeds Controlled with Reduced Rates of ETI114 02 H 
Maximum Height or Diameter 
Ap plication Rate 
Grasses 6 fl. oz. 9 fl. oz. 12 fl. oz. 
BarnyardQrass 2" 3" 4" 
Foxtails (bristly, giant, green) 2" 3" 4" 
vellow - 2" 4" 
Itchgrass 2" 4" 6" 
Johnsongrass, seedling - 8" 12" 
rhizome - 8" 18" 
Panicum (Texas, browntop) 1" 2" 3" 
Fall 1" 2" 4" 
Sandbur (field, 10nQspine) - 1" 3" 
Shattercane 3" 6" 12" 
SorQhum almum 3" 6" 12" 
Timothy 2" 4" 6" 
Volunteer cereals - 2" 6" 
Wild oats' 2" 3" 4" 
Wild proso millet - 2" 4" 
Witchgrass 2'" 4" 6" 
Woollv cUPQrass - - 4" 
Other Tank Mixtures 
Other than the exceptions noted, in addition to the tank mix partners and rates indicated above, other 
products registered for use in field corn may, be tank mixed or sequential applications of full or reduced 
rates applied following a ETI114 02 H application as long as: 
• The tank mixture is not specifically prohibited in the label of the tank mix product. 
• The tank mix product has the same adjuvants, method of application, timing, and use restrictions as 
ETI114 02 H. 
• The tank mix combination is compatible as determined by the jar test described in the TANK MIX 
COMPATIBILITY TESTING section below. 
NOTE: Weed control and crop response with tank mixtures not appearing' in this label are the 
responsibility of the user and manufacturer of the tank mix product. 
Tank Mix Precautions 
6

( ( 
Unless the label of either tank mix partner specifies the maximum rate that may be used, do NOT tank 
mix ETI 11402 H with other products that contain the same active ingredient (nicosulfuron). 
Do NOT exceed labeled application rates .. 
A corn plant's predisposition to develop fused tissue emerging fonrn the whorl (rattail) after the V-11 stage 
may increase if tank mixes or products containing dicamba (e.g., Clarity®, Marksman®) that are applied to 
small corn under early stressful conditions. Refer to the ENVIRONMENTAL CONDITIONS section for a 
description of these stressful conditions. 
To avoid crop injury or antagonism, apply the following products at least seven days prior-to or three days 
after the application of ETI 114 02 H: 
• Tank mixes of ETI 114 02 H with Basagran® and Laddok® may result in severe crop injury. 
• Tank mixing ETI 114 02 H with products containing 2,4-0 may result in severe grass control 
antagonism. 
• Tank mixing ETI 114 02 H. with foliar-applied organophosphate insecticides (e.g., Lorsban®, 
malathion, parathion, etc.) may result in severe crop injury. 
Tank Mix Compatibility Testing 
To ensure ETI 11402 H with other tank mix partners, perform the following jar test prior to mixing: 
1) Mix the tank mix ingredients using theirrelative proportions in a clear glass quart jar with a lid. 
2) Invert the jar containing the mixture several times and observe the mixture for approximately }S 
hour. 
3) If the mixture balls-up, layers, or forms flakes, sludges, gels, oily films or other precipitates, the 
tank mix combination is not compatible and should not be used. 
SEQUENTIAL ETI114 02 H APPLICATIONS 
To control grasses under the following conditions, a sequential application of ETI 114 02 H may be 
necessary: 
• Perennial grasses that regrow from underground stems or roots, depending upon environmental 
conditions. 
• Regrowth of treated annual grasses due to adverse environmental conditions following applications. 
• Annual grasses that have more than one flush of emerging seedlings. 
In a single season, the combined dosage of all sequential applications must not exceed 24 fluid ounces 
per acre of ETI114 02 H. 
Cultivation 
A timely cultivation may be necessary to control suppressed weeds or weeds that emerge after an 
application of ETI 11402 H. For best results,cultivate 7-14 days after ETI 11402 H is applied or as soon 
as new weeds are beginning to be established. 
Environmental Conditions and Biological Activity 
ETI 11402 H provides best results when applied to young actively growing weeds. For best results, apply 
during warm, moist conditions (Le., 70°F or more) with adequate soil moisture both before and after 
application. Weed spectrum and size, spray coverage, growing conditions before and after treatment, soil 
moisture, and adjuvant selection are all factors that will affect the degree and duration of control. 
ETI 11402 H is rainfast in 4 hours after application. 
If weeds that are ·under stress or that exceed the maximum label height are treated, incomplete control 
may result. Crop injury or poor weed control may result from applications made to plants under stress 
from: 
• Carryover from a previous year's herbicide application or prior herbicide applications 
• Weather that is abnormally cold or hot· 
• Environmental conditions such as hail damage, drought, water-saturated soils or frost 
• Injury caused by insects, nematodes, or disease 
Severe stress from conditions preceding or immediately following application may also result in crop injury 
or poor weed control. This stress issue affects all weeds, but especially weeds such as woolly cupgrass, 
green and yellow foxtail arid wild proso millet. . 
7

( ( 
When the corn or grass weeds are under stress, delay the application until the stress passes and both 
weeds and corn resume active growth. 
Soil Insecticide Interaction Information 
Crop response varies with insecticide used, insecticide application method, field corn type and soil type. 
Because ETI 114 02 H may interact with certain insecticides previously applied to the crop, be sure to 
verify that ETI114 02 H is compatible with any insecticides previously applied prior to use. 
Do NOT app!}, ETI114 02 H to corn previously treated with Counter® 15G or to corn treated at cultivation 
with Counter 20CR over the row or in-furrow. . 
Regardless of soil type, ETI 114 02 H may be ap~lied to corn previously treated with non­
organophosphate (OP) soil insecticides or Fortress®, Aztec or Force® insecticides. 
UnacceRtable crop inju~ may occur if applications of ETI 114 02 H to corn previously treated with 
Counter® 20CR, Lorsban ,or Thimet® may occur, especially on soils of less than 4% organic matter . 
. Crop Rotation 
The amount of ETI 114 02 H which may be present in the soil depends on application rate, soil pH and 
organic matter content, elapsed time since application, crop production practices, and environmental 
factors. ETI 11402 H disSipates rapidly in warm, acidic, microbiologically active soils. 
Rotational crops vary in their response to low concentrations of ETI 114 02 H remaining in the soil, and if 
dry weather prevails between application and rotational crop pianting in cold, high-pH soils, injury to 
rotational crops may occur. For additional guidelines, consult your local Etigra representative. 
Because soil pH varies within fields recropping should be based on the highest soil pH within each field. 
Soil pH should be determined on representative soil samples taken at 0-4" depth by laboratory analysis 
using the 1:1 soil:water suspension method. For recommended soil sampling procedures, consult local 
extension publications. 
When using ETI 11402 H at a maximum rate of 24 fluid ounces, the following rotational intervals should 
be observed: 
ETI114 02 H ROTATIONAL CROP GUIDLINE 1 - No Soil pH Restrictions 
Rotational Crop Rotation Interval_(MonthsJ 
Alfalfa· 12 
Cereals, spring (barley, oats, rye, wheat) 8 
Cereals, winter (barley, oats, rye, wheat) 4 
Corn (field, sweet) Anytime 
Corn (pop, sweet)T 10 
Cotton 10 
Dry Beans, Peas, Snap Beans 10 
Red Clover 12 
Soybeans 0.5 (15 days) 
Other Crops See Rotational Crop Guidelines 2 and 3 
t Sweet corn varieties "Merit", Carnival", and "Sweet Success" have a minimum time interval of 15 
months. 
:j: The minimum time interval is 10 months for the state of Kansas east of Highway 75, for Minnesota 
east and south of the Red River Valley and for the states east of the line formed by the western 
borders of Iowa, Missouri, Arkansas and Louisiana. 
ETI114 02 H ROTATIONAL CROP GUIDLINE 2 - Soil pH ~ 7.5 restrictions 
Rotation Interval~Monthsl 
Rotational Crop pH 7.5 pH> 7.5 
Sorghum 10 18T 
Sunflowers 11+ 18 
All other crops not listed in Rotational See Rotational Guideline 3 Guidelines 1 or 2 
t Except in Texas and Oklahoma east of Highway 281 where the rotational interval is 10 months, 
regardless of pH. 
8

( ( 
:j: Precipitation following application must exceed 14" prior to planting sunflowers. 
ETI114 02 H ROTATIONAL CROP GUIDLINE 3 - Soil pH ~ 6.5 restrictions 
Rotation Interval (Months) 
Rotational Crop pH 6.5 pH> 6.5 
Sugarbeets a 
Potatoes b 10 18t 
All other crops not listed in Rotational 10 18 Guidelines 1 or 2 
a) Except on irrigated sites in Colorado, Wyoming, Nebraska, Texas, Michigan and Ohio where 
precipitation following application must exceed 25" prior to planting beets, where the interval is 10 
months on soils with pH < 7.5. Sites in Minnesota east and south of the Red River Valley may follow 
these guidelines provided maximum rates of ETI 114 02 H do not exceed 12 fluid oz. 
b) In the States of WA, OR, ID or Utah, irrigated potatoes following irrigated corn treated can be planted 
10 months after using ETI 114 02 H on sprinkler irrigated corn with no soil pH restrictions, providing 
the maximum use rate on corn does not exceed 18 fluid oz. product per season. Corn treated with ETI 
114 02 H must be grown to maturity and receive a minimum of 18 inches of irrigation water before 
potatoes can be planted at this rotation interval. Injury to potatoes may occur if less than 18 inches of 
irrigation is used on the previous corn crop. ETI 114 02 H may not be used in a tank-mix or sequential 
application program with other ALS-inhibiting herbicides such as Exceed® or Beacon®. 
t The cumulative precipitation in the 18 months following application must exceed 28" in order to rotate 
to sugarbeets or potatoes in North Dakota and northwest Minnesota. 
ETI114 02 H ROTATIONAL CROP GUIDLINE 4 - For a single 12 fluid oz. application per cropping 
season. 
NOTE: Rotational intervals should be extended to 12 months if drought conditions prevail after 
application and before the rotational crop is planted, unless sprinkler irrigation has been applied and 
totals greater than 15" during the growing season. 
Rotational Crop Rotation Interval (Months) 
AlfalfaT 
Canola 
Flax'" 10 Potato 
Red Clover 
Sunflower 
t It is best to use deep fall tillage suc~ as plowing prior to planting alfalfa on sprinkler irrigated fields in 
Idaho, Utah and northern Nevada. Furrpw irrigated soils may result in less product degradation, 
causing some crop injury. 
:j: If drought conditions prevail after application and before the rotational crop is planted, rotational 
intervals should be extended to 18 months UNLESS sprinkler irrigation has been applied and totals 
greater than 15" during the growing season. 
APPLICATION INFORMATION 
USE PRECAUTIONS 
• Do NOT apply ETI114 02 H through any type of irrigation system. 
• All direct or indirect contact (such· as spray drift) with crops other than field corn should be 
avoided because many crops are highly sensitive to ETI 114 02 H (refer to SPRAY DRIFT 
MANAGEMENT). 
• Use 50-mesh or larger strainer screens. 
GROUND APPLICATION 
Broadcast Application -
• For best results, use a minimum of 15 gallons of water per acre (15 GPA). 
• For light, scattered stands of weeds use a minimum of 10 gallons of water per acre (GPA). 
9

• 
• 
• 
( ( 
To minimize spray drift and for optimal product performance, adjust the spray boom to the lowest 
possible spray height recommended in manufacturers' specifications. 
Select 'nozzles and pressure that deliver MEDIUM spray droplets, for example, as indicated in 
nozzle manufacturer's catalogues and in accordance with ASAE Standard S572. Nozzles that 
deliver COARSE spray droplets may be used to reduce drift, provided spray volume is increased 
to main coverage on small weeds. 
Be sure that equipment is setup to avoid applying excessive amounts directly over the rows and 
into the corn plant whorl (most likely to occur when a nozzle is positioned directly above the row). 
• Crop injury may be caused by overlaps or starting, stopping, slowing, and turning while spraying. 
Band Application -
• Use proportionately less spray mixture and calibrate the band applicator being sure to not exceed 
the labeled rate. . 
• Follow the manufacturer's instructions for nozzle type (flat fans), orientation, distance of nozzles 
from the crop and weeds, spray pressure, spray volumes and calibration. 
AERIAL APPLICATION 
NOTE: Aerial applications are prohibited in New York state and California. 
• Do NOT apply during a temperature inversion, when winds are gusty, or when conditions favor 
poor coverage and/or off-target spray movement. 
• Use nozzle types and arrangements that will provide optimum spray distribution and maximum 
coverage at a minimum 3 GPA 
SPRAYER PREPARATION I CLEANUP 
To avoid subsequent crop injury, thoroughly clean all mixing and spray equipment immediately following 
applications of ETI114 02 H~ 
When spraying or mixing equipment will be used' over an extended period to apply multiple loads of ETI 
114 02 H, partially fill the tank with fresh water at the end of each day of spraying, flush the boom and 
hoses, and allow to sit overnight. 
Prior to applying ETI 114 02 H, the spray equipment must be clean and free of all previous pesticide 
deposits. Be sure to clean all application eqUipment BEFORE applying ETI 114 02 H by following the 
cleanup procedures specified on the label of ·the product previously sprayed and following the label 
directions for proper disposal of the rinsate. If no cleanup procedure is provided, use the following 
procedure. 
Cleanup Procedure: 
NOTE: Steam cleaning aerial spray tanks will help to dislodge any visible pesticide deposits. 
1. Drain the tank and thoroughly hose down the interior surfaces. Flush the tank, hoses, and boom 
with clean water for a minimum of 5 minutes. 
2. Partially fill the tank with clean water and add one gallon of household ammonia (containing 3% 
active) for every 100 gallons of water. Finish filling the tank with water, then flush the cleaning 
solution through the hoses, boom, and nozzles. Add more water to completely fill the tank and 
allow to agitate/recirculate for at least 15 minutes. Again, flush the hoses, boom and nozzles with 
the cleaning solution, then drain the tank. 
3. Repeat Step 2. 
4. Remove the nozzles and screens and clean separately in a bucket containing the cleaning agent 
and water. 
5. Thoroughly rinse the tank with clean water for a minimum of 5 min, flushing the water through the 
hoses and boom. . 
SPRAY DRIFT MANAGEMENT 
The interaction of many equipment and weather.:related factors determines the potential for spray drift. 
The applicator is responsible for considering. all these factors when making application decisions. 
AVOIDING SPRAY DRIFT IS THE RESPONSIBILITY OF THE APPLICATOR. 
10

( ( 
IMPORTANCE OF DROPLET SIZE 
The most effective way to reduce drift potential is to apply large droplets (>150-200 microns). The best 
drift management strategy is to apply the largest droplets than provide sufficient coverage and control. 
The presence of sensitive species nearby, the environmental conditions, and pest pressure may affect 
how an applicator balances drift control and coverage. APPLYING LARGER DROPLETS REDUCES 
DRIFT POTENTIAL, BUT WILL NOT PREFENT DRIFT IF APPLICATIONS ARE MADE IMPROPERLY 
OR UNDER UNFAVORABLE ENVIRONMENTAL CONDITIONS! See Wind, Temperature and Humidity, 
and Temperature Inversions sections of this label. 
Controlling Droplet Size - General Techniques 
Volume - Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with higher 
rated flows produce larger droplets. 
Pressure - Use the lower spray pressures· recommended for the nozzle. Higher pressure reduces 
droplet size and does not improve canopy penetration. WHEN HIGHER FLOW RATES ARE NEEDED, 
USE A HIGHER-CAPACITY NOZZLE INSTEAD OF INCREASING PRESSURE. 
Nozzle Type - Use a nozzle type that is designed for the intended application. With most nozzle types, 
narrower spray angles produce larger droplets. Consider using low-drift nozzles. 
Controlling Droplet Size - Aircraft 
Number of Nozzles - Use the minimum number of nozzles with the highest flow rate that provide uniform 
coverage. 
Nozzle Orientation - Orienting nozzles so that the spray is emitted backwards, parallel to the airstream 
will·produce larger droplets than other orientations. 
Nozzle Type - Solid stream nozzles (such as disc and core with swirl plate removed) oriented straight 
back produce larger droplets than other nozzle sizes. 
Boom Length - The boom length should not exceed % of the wing or rotor length - longer booms 
increase drift potential. 
Application Height - Application more than 10 feet above the canopy increases the potential for spray 
drift. 
BOOM HEIGHT 
Setting the boom at the lowest labeled height (if specified) which provides uniform coverage reduces the 
exposure of droplets to evaporation and wind. For ground equipment, the boom should remain level with 
the crop and have minimal bounce. 
WIND 
Drift potential increases at wind speeds of less than 3 mph (due to inversion potential) or more than 10 
mph. However, many factors, including droplet size and equipment type determine drift potential at any 
given wind speed. AVOID GUSTY OR WINDLESS CONDITIONS. 
Note: Locar terrain can influence wind patterns. Every applicator should be familiar with local wind 
patterns and how they affect spray drift. 
TEMPERATURE AND HUMIDITY 
When making applications in hot and dry conditions, set up equipment to produce larger droplets to 
reduce effects of evaporation. 
TEMPERATURE INVERSIONS 
Drift potential is high during a temperature inversion. Temperature inversions restrict vertical air mixing, 
which causes small suspended droplets to remain close to the ground and move laterally in a 
concentrated cloud. Temperature inversions are characterized by increasing temperature with altitude 
and are commori on nights with limited cloud cover and light to no wind. They begin to form as the sun 
sets and often continue into the morning. Their presence can be indicated by ground fog; howev'er, if fog 
is not present, inversions can also be identified by the movement of smoke from a ground source or an 
aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind 
conditions) indicates an inversion, while smoke. that moves upward and rapidly dissipates indicates good 
vertical air mixing. . 
SHIELDED SPRAYERS 
11

c 
Shielding the boom or individual nozzles can reduce the effects of wind. However, it is the responsibility 
of the applicator to verify that the shields are preventing drift and not interfering with uniform deposition of 
the product. 
INTEGRATED PEST MANAGEMENT 
This product may be used as part of an Integrated Pest Management (IPM) program that can include 
biological, cultural, and genetic practices aimed at preventing economic pest damage. IPM principles and 
practices include field scouting or other detection methods, correct target pest identification, population 
monitoring, and treating when target pest populations reach locally determined action thresholds. Consult 
your state cooperative extension service,' professional consultants or other qualified authorities to 
determine appropriate action treatment threshold levels for treating specific pest/crop systems in your 
area. 
RESISTANCE 
When herbicides that affect the same biological site of action are used repeatedly over several years to 
control the same weed species in the same field, naturally-occurring resistant biotypes may survive a 
correctly applied herbicide treatment, propagate, and become dominant in that field. Adequate control of 
these resistant weed biotypes, cannot be expected. If weed control is unsatisfactory, it may be necessary 
to retreat the problem area using a product affecting a different site of action. 
To better manage herbicide resistance through delaying the proliferation and possible dominance of 
herbicide resistant weed biotypes, it may be necessary to change cultural practices within and between 
crop seasons such as using a combination of tillage, retreatment, tank-mix partners and/or sequential 
herbicide applications that have a different site of action. Weed escapes that are allowed to go to seed 
will promote the spread of resistant biotypes. 
It is advisable to keep accurate records of pesticides applied to individual fields to help obtain information 
on the spread and dispersal of resistant biotypes. Consult your agricultural dealer, consultant, applicator, 
and/or appropriate state agricultural extension service representative for specific alternate cultural 
practices or herbicide alternatives available in your area. 
IMPORTANT PRECAUTIONS 
Injury or loss of desirable vegetation may result from failure to observe the following: 
• Do not apply ETI 114 02 H or drain or flush application equipment on or near desirable trees or other 
plants, or on areas where their roots 'may extend, or in locations where the chemical may be washed 
or moved into contact with their roots. 
• Do not use on lawns, walks, driveways, tennis courts or similar areas. 
• Prevent drift of spray to desirable plants. 
• Do not contaminate any body of water. 
• Thoroughly clean application equipment immediately after use. (See the Sprayer Cleanup section of 
this label for instructions.) 
• Do not graze or feed forage, hay, or straw from treated areas to livestock within 30 days of ETI 114 
02 H application. ' 
STORAGE AND DISPOSAL 
Do not contaminate water, food, or feed by storage or disposal. 
PESTICIDE STORAGE: Store product in original container only. Do not contaminate water; other 
pestiCides, fertilizer,food or feed in storage. Store in a cool, dry place. 
PESTICIDE DISPOSAL: Wastes resulting fro,m the use of this product may be disposed of on site or at 
an approved waste disposal facility. 
CONTAINER DISPOSAL: Nonrefillable container. Do not reuse or refill this container, Offer for 
recycling if available. Triple rinse .container (or equivalent) promptly after emptying. Triple rinse as 
follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 
seconds after the flow begins to 'drip. Fill the container X full with water and recap. Shake for 10 
seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. 
Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. 
12

( ( 
CONDITION OF SALE AND LIMITATION OF WARRANTY AND LIABILITY 
NOTICE: Read the entire Directions for Use and Conditions of Sale and Limitation of Warranty and 
Liability before buying or using this product. If the terms are not acceptable, return the product at once, 
unopened, and the purchase price will be refunded. 
The Directions for Use of this product must be followed carefully. It is impossible to eliminate all risks 
inherently associated with the use of this product. Ineffectiveness or other unintended consequences 
may result because of such factors as manner of use or application, weather,. presence of other materials 
or other influencing factors in the use of the product, which are beyond the control of Etigra or Seller. All 
such risks shall be assumed by Buyer and User, and Buyer and User agree to hold Etigra and Seller 
harmless forany claims relating to such factors, 
Etigra warrants that this product conforms to the chemical description on the label and is reasonably fit for 
the purposes stated in the Directions for Use, subject to the inherent risks referred to above, when used 
in accordance with the Directions for Use .. This warranty does not extend to the use of this product 
contrary to label instructions, or under conditions not reasonably foreseeable to or beyond the control of 
, Seller or Etigra, and Buyer and User assume the risk of any such use. TO THE EXTENT CONSISTENT 
WITH APPLICABLE LAW, ETIGRA MAKES NO WARRANTIES OF MERCHANTABILITY OR OF 
FITNESS FOR A PARTICULAR PURPOSE NOR ANY OTHER EXPRESS OR IMPLIED WARRANTY 
EXCEPT AS STATED ABOVE. 
To the extent consistent with applicable law, neither Etigra nor Seller shall be liable for any incidental, 
consequential or special damages resulting from the use or handling of this product. TO THE EXTENT 
CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER OR BUYER, 
AND THE EXCLUSIVE LIABILITY OF ETIGRA AND S.ELLER FOR ANY AND ALL CLAIMS, LOSSES, 
INJURIES OR DAMAGES (INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, CONTRACT, 
NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE)' RESULTING FROM THE USE OR 
HANDLING OF THIS PRODUCT, SHALL BE THE RETURN OF THE PURCHASE PRICE OF THE 
PRODUCT OR, AT THE ELECTION OF ETIGRA OR SELLER, THE REPLACEMENT OF THE 
PRODUCT. 
Etigra and Seller offer this product, and Buyer and User accept it, subject to the foregoing Conditions of 
Sale and Limitation of Warranty and Liability, which may not be modified except by written agreement 
signed by a duly authorized representative of I:tigra. 
ETI 11402 H is not manufactured or distributed by DuPont, seller of Accent®. 
Accent® and CINCH® are trademarks of E.I. DuPont de Nemours and Company. 
AXiom®, Aztec® ,and Balance® are trademarks of Bayer CropScience. ' 
Basagran®, Clarity®, Counter®, Laddok®, Marksman®, Outlook®, Prowl® and Thimet® are trademarks of 
BASF A~ Products. 
Beacon ® Dual®, Exceed® and Force® are trademarks of Syngenta Crop Protection, Inc. 
Fortress is a trademark of Amvac Chemical Corporation. . 
Harness® is a trademark of Monsanto Technology, LLC 
Lorsban® and Surpass® are trademarks of Dow AgroSciences, LLC 
Etigra® is a trademark of Etigra. 
EPA [approval date] 
13