crop-chem-docs/corpus/epa_ppls/7969-409.md

# VELTYMA FUNGICIDE

- EPA Reg No: **7969-409**
- Registrant: BASF AGRICULTURAL SOLUTIONS US, LLC
- Signal word: Caution
- Active ingredients: Pyraclostrobin (17.56%); Mefentrifluconazole (17.56%)
- Label accepted: 2020-11-12
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/007969-00409-20201112.pdf

---
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY 
 WASHINGTON, DC 20460 
 
 
 
New Use PRIA Unconditional v.20150320 
OFFICE OF CHEMICAL SAFETY 
AND POLLUTION PREVENTION 
 
November 12, 2020 
 
Elizabeth Kneller 
Product Registration Manager 
BASF Corporation, Agricultural Products 
P.O. Box 13528, 26 Davis Drive 
Research Triangle Park, NC 27709 
 
Subject: PRIA Label Amendment – Mefe ntrifluconazole: New Uses for Fruiting 
vegetables (Crop Group 8-10), Grasses (Crop Group 17), Grass grown for seed, 
Non-grass forages (Crop Group 18), Oilseeds (Crop subgroup 20B), and 
Sugarcane. 
 Product Name: Veltyma Fungicide 
 EPA Registration Number: 7969-409 
 Application Date: 9/16/19 
 Petition Number: 9F8796 
 Decision Number: 555964 & 555968 
 
Dear Ms. Kneller: 
 
The application referred to above, submitted under the Federal Insecticide, Fungicide and 
Rodenticide Act, as amended is acceptable under FIFRA sec 3 (c)(5). You must submit and/or 
cite all data required for registration/reregistration/registration review of your product when the 
Agency requires all registrants of similar products to submit such data. 
 
A stamped copy of your labeling is enclosed for your records. This labeling supersedes all 
previously accepted labeling. You must submit one (1) copy of the final printed labeling before 
you release the product for shipment with the new labeling. In accordance with 40 CFR 
152.130(c), you may distribute or sell this product under the previously approved labeling for 18 
months from the date of this letter. After 18 months, you may only distribute or sell this product 
if it bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is 
defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please be 
aware that the website becomes labeling under the Federal Insecticide Fungicide and Rodenticide 
Act and is subject to review by the Agency. If the website is false or misleading, the product 
would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40 
CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In addition, 
regardless of whether a website is referenced on your product’s label, claims made on the 
website may not substantially differ from those claims approved through the registration process. 
Therefore, should the Agency find or if it is brought to our attention that a website contains false

Page 2 of 2 
EPA Reg. No. 7969-409 
Decision No. 555964 & 555968 
 
or misleading statements or claims substantially differing from the EPA approved registration, 
the website will be referred to the EPA’s Office of Enforcement and Compliance. 
 
Your release for shipment of the product constitutes acceptance of these conditions. If these 
conditions are not complied with, the registration will be subject to cancellation in accordance 
with FIFRA section 6. If you have any questions, please contact Stephanie Suarez by phone at 
703-347-8221, or via email at Suarez.Stephanie@epa.gov . 
 
Sincerely, 
 
 
Cynthia Giles-Parker, Chief 
Fungicide Branch 
Registration Division (7505P) 
 
 
Enclosure -stamped “accepted” label

Mefentrifluconazole Group 3 Fungicide
Pyraclostrobin Group 11 Fungicide
† For disease control and plant health in beans and peas, citrus, corn, 
fruiting vegetables, grasses, grass grown for seed, non-grass 
forages, oilseeds, peanut, rapeseed (canola), specified small grains, 
sorghum, soybean, sugar beet, sugarcane, and tuberous and corm 
vegetables (including potato)
† See Detailed Use Directions for detailed crop listings.
Active Ingredients*:
mefentrifluconazole: 2-[4-(4-chlorophenoxy)-2-(trifluoromethyl)phenyl]-1- 
( 1 H - 1 , 2 , 4 - t r i a z o l e - 1 - y l ) p r o p a n - 2 - o l ................................... 1 7 . 5 6 %
pyraclostrobin: (carbamic acid, [2-[[[1-(4-chlorophenyl)-1H-pyrazol-3- 
y l ] o x y ] m e t h y l ] p h e n y l ] m e t h o x y - , m e t h y l e s t e r ) ........................... 1 7 . 5 6 %
Other Ingredients: ............................................. 6 4 . 8 8 %
Total: ........................................................1 0 0 . 0 0 %
* VeltymaTM fungicide contains 1.67 lbs mefentrifluconazole and 1.67 lbs pyraclostrobin per gallon.
EPA Reg. No. 7969-409 EPA Est. No.
KEEP OUT OF REACH OF CHILDREN
CAUTION/PRECAUCION
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en 
detalle. (If you do not understand the label, find someone to explain it to you in detail.)
See full label for complete First Aid, Precautionary Statements , 
Directions For Use , Conditions of Sale and Warranty , and state-specific 
crop and/or use site restrictions.
In case of an emergency endangering life or property involving this product, 
call day or night 1-800-832-HELP (4357).
Net Contents:
BASF Corporation 
26 Davis Drive, Research Triangle Park, NC 27709
11/12/2020
7969-409

2
Precautionary Statements
Hazards to Humans and Domestic Animals
CAUTION. Harmful if swallowed. Avoid contact with skin, 
eyes, or clothing. Remove and wash contaminated cloth-
ing before reuse. Wash thoroughly with soap and water 
after handling and before eating, drinking, chewing gum, 
using tobacco, or using the toilet. Prolonged or frequently 
repeated skin contact may cause allergic reactions in 
some individuals.
Personal Protective Equipment (PPE)
Applicators and other handlers must wear:
• Long sleeved shirt, long pants, and shoes plus socks
• Waterproof or chemical-resistant gloves (barrier laminate, 
butyl rubber ≥ 14 mils, nitrile rubber ≥ 14 mils, neoprene 
rubber ≥ 14 mils, polyvinyl chloride (PVC) ≥ 14 mils, or 
viton ≥ 14 mils)
Follow the manufacturer’s instructions for cleaning and 
maintaining PPE. If no such instructions for washables 
exist, use detergent and hot water. Keep and wash PPE 
separately from other laundry.
Engineering Controls
When handlers use closed systems, enclosed cabs, or air-
craft in a manner that meets the requirements listed in the 
Worker Protection Standard (WPS) for agricultural 
 pesticides [40 CFR 170.240(d)(4-6)], the handler PPE 
requirements may be reduced or modified as specified in 
the WPS.
USER SAFETY RECOMMENDATIONS
Users should:
• Wash hands thoroughly with soap and water after han-
dling and before eating, drinking, chewing gum, using 
tobacco, or using the toilet.
• Remove clothing/PPE immediately if pesticide gets 
inside. Then wash thoroughly and put on clean clothing.
• Remove clothing/PPE immediately after handling this 
product. As soon as possible, wash thoroughly and 
change into clean clothing.
Environmental Hazards
This pesticide is toxic to fish and aquatic invertebrates. 
Drift and runoff may be hazardous to aquatic organisms in 
water adjacent to treated areas.
DO NOT apply directly to water, or to areas where surface 
water is present, or to intertidal areas below the mean high 
water mark. DO NOT contaminate water when disposing 
of equipment washwater or rinsate.
This product may impact surface water quality because of 
runoff of rainwater. This is especially true for poorly drain-
ing soils and soils with shallow groundwater.
Groundwater Advisory
This chemical has properties and characteristics associat-
ed with chemicals detected in groundwater. This chemical 
may leach into groundwater if used in areas where soils are 
permeable, particularly where the water table is shallow.
Surface Water Advisory
This product is classified as having high potential for 
reaching aquatic sediment via runoff for several months or 
more after application. Poorly draining soils and soils with 
shallow water tables are more prone to produce runoff that 
contains this product. A level, well-maintained vegetative 
buffer strip between areas to which this product is applied 
FIRST AID
If swallowed
• Call a poison control center or doctor immediately for treatment advice.
• Have person sip a glass of water if able to swallow.
• DO NOT induce vomiting unless told to do so by a poison control center or doctor.
• DO NOT give anything by mouth to an unconscious person.
If on skin or clothing
• Take off contaminated clothing.
• Rinse skin immediately with plenty of water for 15 to 20 minutes.
• Call a poison control center or doctor for treatment advice.
If inhaled
• Move person to fresh air.
• If person is not breathing, call 911 or an ambulance; then give artificial respiration, prefer-
ably by mouth to mouth, if possible.
• Call a poison control center or doctor for further treatment advice.
If in eyes
• Hold eyes open and rinse slowly and gently with water for 15 to 20 minutes.
• Remove contact lenses, if present, after the first 5 minutes; then continue rinsing.
• Call a poison control center or doctor for treatment advice.
HOTLINE NUMBER
Have the product container or label with you when calling a poison control center or doctor or going for treatment. 
You may also contact BASF Corporation for emergency medical treatment information: 1-800-832-HELP (4357).

3
and surface water features such as ponds, streams, and 
springs will reduce the potential loading of this active ingre-
dient or its degradates from runoff water and sediment. 
Runoff of this product will be reduced by avoiding applica-
tion when rainfall is forecast to occur within 48 hours.
Sound erosion control practices will reduce this product’s 
potential to reach aquatic sediment via runoff.
Directions For Use
It is a violation of federal law to use this product in a man-
ner inconsistent with its labeling. This labeling must be in 
the user’s possession during application. Read the entire 
Directions For Use and Conditions of Sale and 
 Warranty before using this product.
Use Restrictions
• DO NOT use in greenhouse production.
• DO NOT apply this product in a way that will contact work-
ers or other persons, either directly or through drift. Only 
 protected handlers may be in the area during application. 
For any requirements specific to your state or tribe, consult 
the agency responsible for pesticide regulation.
• Veltyma
TM fungicide is not for sale, distribution, or use 
in Nassau and Suffolk counties in New York State .
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and 
with the Worker Protection Standard, 40 CFR Part 170. 
This standard contains requirements for the protection of 
agricultural workers on farms, forests, nurseries, and 
greenhouses, and handlers of agricultural pesticides. It 
contains requirements for training, decontamination, notifi-
cation, and emergency assistance. It also contains specific 
instructions and exceptions pertaining to the statements 
on this label about personal protective equipment (PPE), 
restricted-entry interval, and notification to workers. The 
requirements in this box only apply to uses of this product 
that are covered by the Worker Protection Standard.
DO NOT enter or allow worker entry into treated areas 
during the restricted-entry interval (REI) of 12 hours.
EXCEPTION: If the product is soil injected or soil incorpo-
rated, the Worker Protection Standard, under certain 
circumstances, allows workers to enter the treated area if 
there will be no contact with anything that has been treated.
PPE required for early entry to treated areas that is per-
mitted under the Worker Protection Standard and that 
involves contact with anything that has been treated, 
such as plants, soil, or water, is:
• Coveralls
• Chemical-resistant gloves (barrier laminate, butyl 
 rubber ≥ 14 mils, nitrile rubber ≥ 14 mils, neoprene 
rubber ≥ 14 mils, polyvinyl chloride (PVC) ≥ 14 mils, or 
viton ≥ 14 mils)
• Shoes plus socks
STORAGE AND DISPOSAL
DO NOT contaminate water, food, or feed by storage or 
disposal.
Pesticide Storage
Store in original containers only. Keep container closed 
when not in use. DO NOT store near food or feed.
Pesticide Disposal
Wastes resulting from using this product may be dis-
posed of on-site or at an approved waste disposal 
facility. If these wastes cannot be disposed of according 
to label instructions, contact your State Pesticide or 
Environmental Control Agency, or the Hazardous Waste 
representatives at the nearest EPA Regional Office for 
guidance.
Container Handling
Nonrefillable Container. DO NOT reuse or refill this 
container. Triple rinse or pressure rinse container (or 
equivalent) promptly after emptying; then offer for recy-
cling, if available, or reconditioning, if appropriate, or 
puncture and dispose of in a sanitary landfill, or by incin-
eration, or by other procedures approved by state and 
local authorities.
Triple rinse containers small enough to shake 
(capacity ≤ 5 gallons) as follows: Empty the remain-
ing contents into application equipment or a mix tank 
and drain for 10 seconds after the flow begins to drip. Fill 
the container 1/4 full with water and recap. Shake for 
10 seconds. Pour rinsate into application equipment or a 
mix tank, or store rinsate for later use or disposal. Drain 
for 10 seconds after the flow begins to drip. Repeat this 
procedure two more times.
Triple rinse containers too large to shake 
 (capacity > 5 gallons) as follows: Empty the remain-
ing contents into application equipment or a mix tank. 
Fill the container 1/4 full with water. Replace and tighten 
closures. Tip container on its side and roll it back and 
forth, ensuring at least one complete revolution, for 
30 seconds. Stand the container on its end and tip it 
back and forth several times. Turn the container over 
onto its other end and tip it back and forth several times. 
Empty the rinsate into application equipment or a mix 
tank, or store rinsate for later use or disposal. Repeat 
this procedure two more times.
Pressure rinse as follows: Empty the remaining con-
tents into application equipment or mix tank and 
continue to drain for 10 seconds after the flow begins to 
drip. Hold container upside down over application 
equipment or mix tank, or collect rinsate for later use or 
disposal. Insert pressure rinsing nozzle in the side of the 
container and rinse at about 40 PSI for at least 30 sec-
onds. Drain for 10 seconds after the flow begins to drip.
(continued)

4
STORAGE AND DISPOSAL (continued)
Container Handling (continued)
Refillable Container. Refill this container with pesticide 
only. DO NOT reuse this container for any other purpose. 
Triple rinsing the container before final disposal is the 
responsibility of the person disposing of the container. 
Cleaning before refilling is the responsibility of the refiller.
Triple rinse as follows: To clean the container before 
final disposal, empty the remaining contents from this 
container into application equipment or mix tank. Fill the 
container about 10% full with water. Agitate vigorously or 
recirculate water with the pump for 2 minutes. Pour or 
pump rinsate into application equipment or rinsate col-
lection system. Repeat this rinsing procedure two more 
times.
When this container is empty, replace the cap and seal all 
openings that have been opened during use; return the 
container to the point of purchase or to a designated 
location. This container must only be refilled with a pesti-
cide product. Prior to refilling, inspect carefully for damage 
such as cracks, punctures, abrasions, worn-out threads 
and closure devices. Check for leaks after refilling and 
before transport. DO NOT transport if this container is 
damaged or leaking. If the container is damaged, or leak-
ing, or obsolete and not returned to the point of purchase 
or to a designated location, triple rinse emptied container 
and offer for recycling, if available, or dispose of container 
in compliance with state and local regulations.
In Case of Emergency
In case of large-scale spill of this product, call:
• CHEMTREC 1-800-424-9300
• BASF Corporation 1-800-832-HELP (4357)
In case of medical emergency regarding this product, call:
• Your local doctor for immediate treatment
• Your local poison control center (hospital)
• BASF Corporation 1-800-832-HELP (4357)
Steps to take if material is released or spilled:
• In case of spill on floor or paved surfaces, mop and 
remove to chemical waste storage area until proper dis-
posal can be made if product cannot be used according 
to label.
• Dike and contain the spill with inert material (sand, 
earth, etc.) and transfer liquid and solid diking material to 
separate containers for disposal.
• Remove contaminated clothing and wash affected skin 
areas with soap and water.
• Wash clothing before reuse.
• Keep the spill out of all sewers and open bodies of water.
Product Information
VeltymaTM fungicide is a broad-spectrum fungicide con-
taining the active ingredients mefentrifluconazole and 
pyraclostrobin for use in beans and peas, citrus, corn, 
fruiting vegetables, grasses, grass grown for seed, non-
grass forages, oilseeds, peanut, rapeseed (canola), 
specified small grains, sorghum, soybean, sugar beet, 
sugarcane, and tuberous and corm vegetables (including 
potato. For optimum disease control, apply Veltyma
TM 
fungicide in a regularly scheduled protective spray pro-
gram and use in a rotation program with non-Group 3 
and non-Group 11 fungicides.
Preventive applications of VeltymaTM fungicide optimize 
disease control, resulting in improved plant health. Timed 
applications, as specified in the Detailed Use Directions 
of this label, optimize disease control and can have posi-
tive effects on plant physiology, including improved stress 
tolerance and/or improved growth efficiency. This overall 
increased plant health may result in an improvement in 
crop growth, crop quality and/or crop yields. These results 
may vary according to factors such as the crop, crop 
genetics, application timing or environment.
Information regarding the contents and levels of metals in 
this product is available on the internet at 
http://www.aapfco.org/metals.htm.
Mode of Action
Mefentrifluconazole, the active ingredient in VeltymaTM 
fungicide inhibits the demethylation step of sterol biosyn-
thesis (DMI) which disrupts cell membrane synthesis and is 
classified by FRAC as a Group 3 fungicide. Pyraclostrobin 
belongs to the group of respiration inhibitors classified by 
the US EPA and Canada PMRA as Quinone Outside Inhibi-
tors (QoI) which are classified by FRAC as Group 11 
fungicides.
Resistance Management
For resistance management, please note that VeltymaTM 
fungicide contains both a Group 3 (mefentrifluconazole) 
and Group 11 (pyraclostrobin) fungicide. Any fungal popu-
lation may contain individuals naturally resistant to 
Veltyma
TM fungicide and other Group 3 or Group 11 
fungicides. A gradual or total loss of pest control may 
occur over time if these fungicides are used repeatedly in 
the same fields. Appropriate resistance-management strat-
egies should be followed.
To delay fungicide resistance, take one or more of 
the following steps: 
• Rotate the use of Veltyma
TM fungicide or other 
Group 3 or Group 11 fungicides within a growing sea-
son sequence with different groups that control the 
same pathogens.
• Use tank mixtures with fungicides from a different group 
that are equally effective on the target pest when such 
use is permitted. Use at least the minimum application 
rate as labeled by the manufacturer.

5
• Adopt an integrated disease management program for 
fungicide use that includes scouting, uses historical infor-
mation related to pesticide use, and crop rotation, and 
which considers host plant resistance, impact of environ-
mental conditions on disease development, disease 
thresholds, as well as cultural, biological and other 
chemical control practices.
• Where possible, make use of predictive disease models 
to effectively time fungicide applications. Note that using 
predictive models alone is not sufficient to manage 
resistance.
• Monitor treatment area for lack of biological efficacy that 
might indicate possible resistance development.
• Contact your local extension specialist or certified crop 
advisor for any additional pesticide resistance- 
management and/or Integrated Pest Management 
(IPM) recommendations for specific crops and 
pathogens.
• For further information or to report suspected resistance 
consult your local BASF representative, extension spe-
cialist, or certified crop advisor.
Application Instructions
• VeltymaTM fungicide can be applied by ground or air, 
and through field sprinkler irrigation (chemigation) 
systems.
• Veltyma
TM fungicide can be applied through field sprin-
kler irrigation (chemigation) systems except on 
sugarcane. 
• DO NOT apply this product to sugarcane through any 
type of irrigation system.
• Thorough and uniform coverage is required for optimum 
performance.
• Application equipment, including injection systems, must 
be cleaned thoroughly before and after applying this 
product, particularly if a product with the potential to 
injure crops was used before application of Veltyma
TM 
fungicide. Flush system with clean water.
Ground Application
- Use a minimum of 10 gallons of water per acre to 
ensure uniform and thorough canopy penetration and 
coverage of foliage, bloom, and fruit.
- Complete coverage of the stem all the way down to soil 
level is required for suppression of soilborne diseases 
of the stem.
Veltyma
TM fungicide label rates specify the amount of 
product to apply uniformly over an acre of ground on a 
broadcast basis. Veltyma
TM fungicide may be banded 
over rows or plant beds with alleys or row middles left 
unsprayed. For these uses, reduce rates of Veltyma
TM 
fungicide in proportion to the area sprayed to avoid appli-
cation at higher than labeled use rates.
Calculate the broadcast-equivalent rate for banded 
application:
sprayed bed 
width +
unsprayed 
row middles 
width
= total row 
width
sprayed bed 
width in inches x broadcast rate 
per acre = band rate 
per acretotal row 
width in inches
EXAMPLE: Banded application to 45-inch plant beds 
separated by 15-inches of unsprayed row middles based 
on a broadcast rate of 10 ozs/A:
45 inches 
sprayed 
bed width
+
15 inches 
unsprayed 
row middles width
=
60 inches 
total 
row width
45 inches 
sprayed 
bed width x
10 fl ozs 
VeltymaTM 
fungicide 
per acre
=
7.5 fl ozs 
VeltymaTM 
fungicide 
per acre
60 inches 
total 
row width
Aerial Application
- For aerial application in New York State, DO NOT 
apply within 100 feet of aquatic habitats (such as, 
but not limited to lakes, reservoirs, rivers, 
streams, marshes, ponds, estuaries, and com-
mercial fish ponds.
- Minimum spray volume per acre: 2 gallons of spray 
solution per acre, unless otherwise specified in the 
Detailed Use Directions section.
- DO NOT apply in spray solutions less than 50% water 
by volume. Reduced spray volumes used in aerial 
application may result in physical incompatibility, 
reduced disease control, or crop injury particularly 
when mixed with other products. 
Field Sprinkler Irrigation (Chemigation) 
Application
• Apply this product only through field sprinkler irrigation 
systems including center pivot, lateral move, end tow, 
side (wheel) roll, traveler, big gun, solid set, or hand move 
irrigation systems. DO NOT apply this product through 
any other type of irrigation system.
• DO NOT apply this product to sugarcane through any 
type of irrigation system.
• DO NOT apply when wind speed favors drift beyond the 
area intended for treatment.
• Add Veltyma
TM fungicide to the pesticide supply tank 
containing sufficient water to maintain a continuous flow 
by the injection equipment. In continuous moving sys-
tems, inject this product-water mixture continuously, 
applying the labeled rate per acre for that crop. DO NOT 
apply more than 1/2 inch (13,577 gallons) per acre. In

6
stationary or non-continuous moving systems, inject the 
product-water mixture in the last 15 to 30 minutes of 
each set, allowing enough time to apply the crop-specific 
labeled rate per acre through the sprinkler heads. Crop 
injury, lack of effectiveness, or illegal pesticide residues in 
the crop can result from nonuniform distribution of treat-
ed water. Uniform and thorough coverage of foliage is 
required for control. Maintain constant agitation through-
out mixing and application.
• If you have questions about calibration, you should con-
tact state extension service specialists, equipment 
manufacturers, or other experts.
• The system must contain a functional check valve, vacu-
um relief valve, and low pressure drain appropriately 
located on the irrigation pipeline to prevent water-source 
contamination from backflow.
• The pesticide injection pipeline must contain a functional, 
automatic, quick-closing check valve to prevent the flow 
of fluid back toward the injection pump.
• The pesticide injection pipeline must also contain a func-
tional, normally closed, solenoid-operated valve located 
on the intake side of the injection pump and connected 
to the system interlock to prevent fluid from being with-
drawn from the supply tank when the irrigation system is 
either automatically or manually shut down.
• The system must contain functional interlocking controls 
to automatically shut off the pesticide injection pump 
when the water pump motor stops.
• The irrigation line or water pump must include a function-
al pressure switch which will stop the water pump motor 
when the water pressure decreases to the point where 
pesticide distribution is adversely affected.
• Systems must use a metering pump, such as a positive 
displacement injection pump (e.g., diaphragm pump), 
effectively designed and constructed of materials com-
patible with pesticides and capable of being fitted with a 
system interlock.
• Allow sufficient time for pesticide to be flushed through 
all lines and all nozzles before turning off irrigation water. 
A person knowledgeable of the chemigation system and 
responsible for its operation or under the supervision of 
the responsible person, shall shut the system down and 
make necessary adjustments should the need arise.
• DO NOT connect an irrigation system used for pesticide 
application to a public water system unless the pesticide 
label-prescribed safety devices for public water systems 
are in place.
Specific Instructions for Public Water 
Systems
1. Public water system means a system for the provision to 
the public of piped water for human consumption if such 
system has at least 15 service connections or regularly 
serves an average of at least 25 individuals daily at least 
60 days out of the year.
2. Chemigation systems connected to public water sys-
tems must contain a functional, reduced-pressure zone, 
backflow preventer (RPZ) or the functional equivalent in 
the water supply line upstream from the point of pesti-
cide introduction. As an option to the RPZ, the water 
from the public water system should be discharged into 
a reservoir tank prior to pesticide introduction. There 
shall be a complete physical break (air gap) between the 
outlet end of the fill pipe and the top or overflow rim of 
the reservoir tank of at least twice the inside diameter of 
the fill pipe.
3. The pesticide injection pipeline must contain a function-
al, automatic, quick-closing check valve to prevent the 
flow of fluid back toward the injection pump.
4. The pesticide injection pipeline must contain a function-
al, normally closed, solenoid-operated valve located on 
the intake side of the injection pump and connected to 
the system interlock to prevent fluid from being with-
drawn from the supply tank when the irrigation system is 
either automatically or manually shut down.
5. The system must contain functional interlocking controls 
to automatically shut off the pesticide injection pump 
when the water pump motor stops, or in cases where 
there is no water pump, when the water pressure 
decreases to the point where pesticide distribution is 
adversely affected.
6. Systems must use a metering pump, such as a positive 
displacement injection pump (e.g., diaphragm pump), 
effectively designed and constructed of materials that 
are compatible with pesticides and capable of being fit-
ted with a system interlock.
7. DO NOT apply when wind speed favors drift beyond the 
area intended for treatment.
Spray Drift Management
DO NOT apply when conditions favor drift beyond the 
intended (target) application area. Drift-reduction measures 
include:
1. DO NOT apply if wind speed is 15 mph or more. Use 
caution when applying if nontarget crops are downwind 
and wind is present. DO NOT apply if winds are gusty.
2. Apply only when the potential for drift to adjacent sensi-
tive areas (e.g. bodies of water or nontarget crops) is 
minimal and when wind is blowing away from sensitive 
areas.
3. Use caution when conditions are favorable for drift 
(drought, high temperatures, low relative humidity).
4. DO NOT apply during a temperature inversion. Consult 
local weather services before applying if conditions are 
favorable for inversion.
Tank Mixing Other Products and Additives
It is the pesticide user’s responsibility to ensure that 
all products are registered for the intended use. 
Read and follow the applicable restrictions and lim-
itations and directions for use on all product labels 
involved in tank mixing. Users must follow the most

7
restrictive directions for use and precautionary 
statements of each product in the tank mixture.
VeltymaTM fungicide can be tank mixed with other fungi-
cides, insecticides, herbicides, liquid fertilizers, biological 
control products, adjuvants, and additives. Always follow 
the most restrictive label use directions. See the Detailed 
Use Directions section for additional crop specific 
information.
BASF has not tested all varieties and cultivars with all pos-
sible tank mix combinations and rates of additives or 
adjuvants. Local environmental conditions can also influ-
ence crop tolerance and may not match those under 
which BASF has conducted testing. Physical incompatibili-
ty, reduced disease control, or injury may result from 
mixing Veltyma
TM fungicide with other products.
To minimize the likelihood of injury, before using any tank 
mix previously listed, test the combination on a small por-
tion of the crop to be treated to ensure a phytotoxic 
response will not occur as a result of application. However, 
environmental variability precludes direct and consistent 
projection of small area test results to future use.
When an adjuvant is used with this product, BASF recom-
mends the use of a Chemical Producers and Distributors 
Association certified adjuvant.
Consult a BASF representative or local agricultural authori-
ties for more information on use of additives or adjuvants 
with this product.
Adjuvant Use Limitation on Corn
Adjuvant crop damage can occur when an adjuvant is 
used after the V8 stage and before the VT stage (the VT 
stage is defined as when the tassel’s last branch is com-
pletely visible outside the whorl). If an adjuvant is used after 
the V8 stage and before the VT stage, the grower and the 
user are responsible for contacting the adjuvant source 
(adjuvant distributor, retailer, or manufacturer) for advice 
and confirmation that the adjuvant has been tested and 
proved to be safe for application from the V8 to VT corn 
stages. Refer to the adjuvant label for specific use direc-
tions and restrictions. Always follow the most restrictive 
label.
Compatibility Test
Before mixing components, always perform a compatibility 
jar test.
1. Add components in the order listed in Mixing Order 
instructions.
 - For 10 gallons per acre spray volume: Start with 
1 pint (2 cups) of water from the intended source at the 
source temperature.
 - For other spray volumes: Adjust rates accordingly.
 - Dry product: Add 2 teaspoons per pound of product 
per acre.
 - Liquid product: Add 1 teaspoon per pint of product 
per acre.
2. Always cap the jar and invert 10 cycles after component 
additions.
3. When the components have all been added to the jar, 
let the solution stand for 15 minutes.
4. Evaluate the solution for uniformity and stability. The 
spray solution should not have free oil on the surface, 
fine particles that precipitate to the bottom, or thick 
(clabbered) texture. DO NOT use any spray solution that 
could clog spray nozzles.
Mixing Order
Make sure each component is thoroughly mixed and sus-
pended before adding tank mix partners. Except when 
mixing in PVA bags, maintain constant agitation during 
mixing and application. 
1. Water - Fill a thoroughly clean sprayer tank 3/4 full of 
clean water and begin agitation.
2. Inductor - If an inductor is used, rinse it thoroughly 
after each component has been added.
3. Products in PVA bags - Place any product contained 
in water-soluble PVA bags into the mixing tank. Wait 
until all water-soluble PVA bags have fully dissolved and 
the product is evenly mixed in the spray tank before 
continuing.
4. Water-dispersible products (such as dry flowables, 
wettable powders, suspension concentrates including 
Veltyma
TM fungicide, or suspo-emulsions)
 - Containers 5 gallons or less: Shake well before 
adding to the tank.
 - Containers more than 5 gallons: Recirculate 
before adding to the tank.
 - Consult a BASF representative for additional informa-
tion regarding agitation and recirculation.
5. Water-soluble products
6. Emulsifiable concentrates (such as oil concentrates 
when applicable)
7. Water-soluble additives [such as ammonium sulfate 
(AMS) or urea ammonium nitrate (UAN) when applicable]
8. Remaining quantity of water

8
Crop Rotation Restrictions
Rotational Crops: Please see the following table for crop 
rotational restrictions.
Crop or Crop Group
Rotation 
Interval
Brassicas including broccoli, cauliflower 
and head cabbages (crop group 5-16)
Bulb vegetables including 
bulb onion, spring onion and garlic 
(crop group 3-07)
Cereals, including wheat, oats, barley, 
triticale, rye, rice and corn (crop group 
15 and crop group 16)
Cucurbits including cucumber, squash 
and melons (crop group 9)
Fruiting vegetables including tomato, 
eggplant, peppers (crop group 8-10)
Fresh herbs
Grass and non-grass animal 
feeds including alfalfa and clover 
(crop group 17 and crop group 18)
Leafy vegetables including lettuces, 
spinach and leafy cabbages 
(crop group 4-16)
Legume vegetables including soybean 
(crop group 6 and crop group 7)
Low-growing berries including 
strawberries (crop group 13-07G)
Oilseeds including cotton, sunflower and 
canola (crop group 20)
Peanut
Root and tuber vegetables including 
carrot, potato, beets and sugar beet 
(crop group 1 and crop group 2)
Stalk, stem and leaf petiole vegetables 
including celery and asparagus 
(crop group 22)
Sugarcane
Any other crop labeled for direct 
application of a product containing 
mefentrifluconazole
May be 
planted 
immediately 
following 
the last 
application
Other food and feed crops, not 
listed above
May not be 
planted in 
rotation

9
Detailed Use Directions
Labeled Crops
Foliar
• When conditions favor disease or disease pressure is high:
- Use the shorter specified interval.
- For a rate range, use the higher specified rate.
• DO NOT make more than two (2) sequential applications of VeltymaTM fungicide before alternating to a 
labeled non-Group 3 or non-Group 11 fungicide, unless otherwise specified in the following crop-specific 
use sections.
Use Rate Conversion
 fl ozs product/A lb mefentrifluconazole/A lb pyraclostrobin/A
 5 0.07 0.07
 7 0.09 0.09
 8 0.10 0.10
 10 0.13 0.13
 13.5 0.18 0.18
 20 0.26 0.26
 30 0.39 0.39
 40.5 0.53 0.53
State-specific Restrictions - Not for sale, distribution, or use in Nassau and Suffolk counties in New York State.

10
Citrus
Disease Controlled
Rate
per Acre
(fl ozs
product)
per
application
Rate
per Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Foliar
Alternaria brown spot
Alternaria citri
Anthracnose
Colletotrichum acutatum, C. gloeosporioides
Blackspot
Guignardia citricarpa
Greasy spot
Mycosphaerella citri
Melanose
Diaporthe citri
Postbloom fruit drop
Colletotrichum acutatum
Scab
Elsinoe fawcettii
5 to 10 30 0
• Spray Interval
- Apply before the onset of disease and on a minimum interval of 14 days.
Use Restrictions
• DO NOT apply more than 10 fl ozs (0.13 lb mefentrifluconazole, 0.13 lb pyraclostrobin) per acre per application.
• DO NOT make more than 3 applications at 10 fl ozs per acre per year.
• DO NOT apply more than 30 fl ozs (0.39 lb mefentrifluconazole, 0.39 lb pyraclostrobin) per acre per year.
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year of mefentrifluconazole-containing products.
• DO NOT apply more than a cumulative total of 0.88 lb ai/acre/year of pyraclostrobin-containing products.
• Aerial Application - DO NOT use less than 10 gallons of spray solution per acre.
Detailed Citrus (subgroups 10-10a, 10-10b and 10-10c) Crop List - calamondin; citron; citrus hybrids; grapefruit 
(grapefruit, Japanese summer); kumquat; lemon; lime (lime, Australian desert, Australian finger, Australian round, 
Brown River finger, Mount White, New Guinea wild, Russell River, sweet, Tahiti); mandarin (Mediterranean, satsuma); 
orange (sour, sweet, tachibana, trifoliate); pummelo; tangelo; tangerine (mandarin); tangor; uniq fruit; cultivars, varieties, 
and/or hybrids of these.

11
Corn
Disease Controlled
Rate
per Acre
(fl ozs
product)
per
application
Rate
per Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Foliar
Anthracnose
Colletotrichum graminicola
Eyespot
Aureobasidium zeae (formerly known as Kabatiella zeae)
Gray leaf spot
Cercospora zeae-maydis
Northern corn leaf blight
Exserohilum turcicum
Northern corn leaf spot
Cochliobolus carbonum
Physoderma brown spot
Physoderma maydis
Rust, common
Puccinia sorghi
Rust, southern
Puccinia polyspora
Southern corn leaf blight
Bipolaris maydis
Tar spot
Phyllachora maydis
Yellow leaf blight
Phyllosticta maydis
7 to 10
20 
(field corn, 
popcorn, 
silage, and 
seed corn)
30 
(sweet 
corn)
21
• Spray Interval
- Sweet corn: Apply at 7-day to 14-day intervals.
- Field corn, Popcorn, Silage, Seed corn: Apply at 14-day intervals.
• Adjuvant Use Limitation on Corn - Adjuvant crop damage can occur when an adjuvant is used after the 
V8 stage and before the VT stage (the VT stage is defined as when the tassel’s last branch is completely visi-
ble outside the whorl). If an adjuvant is used after the V8 stage and before the VT stage, the grower and the 
user are responsible for contacting the adjuvant source (adjuvant distributor, retailer, or manufacturer) for 
advice and confirmation that the adjuvant has been tested and proved to be safe for application from the V8 
to VT corn stages. Refer to the adjuvant label for specific use directions and restrictions. Always follow the 
most restrictive label.
(continued)

12
Corn
(continued)
Use Restrictions
• DO NOT apply more than 10 fl ozs (0.13 lb mefentrifluconazole, 0.13 lb pyraclostrobin) per acre per application.
• DO NOT make more than 3 applications at 10 fl ozs or 4 applications at 7 fl ozs per acre per year to sweet corn.
• DO NOT apply more than 30 fl ozs (0.39 lb mefentrifluconazole, 0.39 lb pyraclostrobin) to sweet corn per acre per 
year.
• DO NOT make more than 2 applications at 10 fl ozs per acre per year to corn grown for seed, field corn, and 
popcorn.
• DO NOT apply more than 20 fl ozs (0.26 lb mefentrifluconazole, 0.26 lb pyraclostrobin) to field corn, popcorn, and 
seed corn per acre per year.
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year of mefentrifluconazole-containing products corn 
grown for seed, field corn, and popcorn.
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year of mefentrifluconazole-containing products to 
sweet corn.
• DO NOT apply more than a cumulative total of 1.18 lbs ai/acre/year of pyraclostrobin-containing products.
Detailed Corn Crop List - corn grown for seed, field corn, popcorn, silage, sweet corn.

13
Fruiting Vegetables [†]
Disease Controlled
Rate
per Acre
(fl ozs
product)
per
application
Rate
per Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Foliar
Anthracnose
Colletotrichum coccodes
Black mold
Alternaria alternata
Early blight
Alternaria solani
Powdery mildew
Leveillula taurica, Oidiopsis taurica
Septoria leaf spot
Septoria lycopersici
Target spot
Corynespora cassiicola
* Rhizoctonia stem rot
Rhizoctonia solani
* Southern blight
Sclerotium rolfsii
7 to 10
30 0
* Late blight
Phytophthora infestans 10
• Spray Interval
- Apply before the onset of disease and on a minimum interval of 7 days.
* Suppression only
[OPTIONAL: † State-specific Restrictions - Not registered for use in California. ]
Use Restrictions
• DO NOT apply more than 10 fl ozs (0.13 lb mefentrifluconazole, 0.13 lb pyraclostrobin) per acre per application.
• DO NOT make more than 3 applications at 10 fl ozs per acre per year.
• DO NOT apply more than 30 fl ozs (0.39 lb mefentrifluconazole, 0.39 lb pyraclostrobin) per acre per year.
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year of mefentrifluconazole-containing products.
• DO NOT apply more than a cumulative total of 1.12 lbs ai/acre/year of pyraclostrobin-containing products.
Detailed Fruiting Vegetables (crop group 8-10) Crop List - African eggplant; bush tomato; bell pepper; cocona; 
currant tomato; eggplant; garden huckleberry; goji berry; groundcherry; martynia; naranjilla; okra; pea eggplant; 
 pepino; non-bell pepper; roselle; scarlet eggplant; sunberry; tomatillo; tomato; tree tomato; cultivars, varieties, and/or 
hybrids of these.

14
Grasses [†]
Disease Controlled
Rate
per Acre
(fl ozs
product)
per
application
Rate
per Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Foliar
Anthracnose [†]
Colletotrichum spp. 
Leaf Spot/Blight [†]
Bipolaris spp., Cochliobolus spp., Drechslera spp., 
 Stagonospora spp.
Net Blotch [†]
Drechslera spp., Helminthosporium spp.
Powdery Mildew [†]
Erysiphe spp.
Purple Leaf Spot [†]
Stagonospora spp.
Rust [†]
Puccinia spp., Uromyces dactylidis
Septoria Leaf Spot [†]
Septoria spp.
7 to 10 30 0
• Spray Interval
- Apply at 14-day to 21-day intervals.
[OPTIONAL: † State-specific Restrictions - Not registered for use in California. ]
Use Restrictions
• DO NOT apply more than 10 fl ozs (0.13 lb mefentrifluconazole, 0.13 lb pyraclostrobin) per acre per application.
• DO NOT make more than 3 applications at 10 fl ozs per acre per year.
• DO NOT apply more than 30 fl ozs (0.39 lb mefentrifluconazole, 0.39 lb pyraclostrobin) per acre per year.
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year of mefentrifluconazole-containing products.
• DO NOT apply more than a cumulative total of 0.73 lb ai/acre/year of pyraclostrobin-containing products.
Detailed Grasses (crop group 17) Crop List - any grass, Gramineae family (either green or cured) that will be fed to 
or grazed by livestock, all pasture and range grasses and grasses grown for hay or silage, except sugarcane and those 
included in the cereal grains group.

15
Grass Grown for Seed [†]
Disease Controlled
Rate
per Acre
(fl ozs
product)
per
application
Rate
per Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Foliar
Powdery mildew
Erysiphe spp.
Rust
Puccinia spp.
7 to 10 20 0
• Spray Interval
- Apply at 14-day to 21-day intervals.
[OPTIONAL: † State-specific Restrictions - Not registered for use in California. ]
Use Restrictions
• DO NOT apply more than 10 fl ozs (0.13 lb mefentrifluconazole, 0.13 lb pyraclostrobin) per acre per application.
• DO NOT make more than 2 applications at 10 fl ozs per acre per year.
• DO NOT apply more than 20 fl ozs (0.26 lb mefentrifluconazole, 0.26 lb pyraclostrobin) per acre per year.
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year of mefentrifluconazole-containing products.
• DO NOT apply more than a cumulative total of 0.73 lb ai/acre/year of pyraclostrobin-containing products.
Detailed Grass Grown for Seed (crop group 17) Crop List - any grass, Gramineae family (either green or cured) 
that will be fed to or grazed by livestock, all pasture and range grasses and grasses grown for hay or silage, except 
sugarcane and those included in the cereal grains group.

16
Legume Vegetables (crop group 6)
(except soybean and edamame)
Disease Controlled
Rate
per Acre
(fl ozs
product)
per
application
Rate
per Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Foliar
Alternaria leaf and pod spot
Alternaria spp.
Anthracnose
Colletotrichum spp.
Ascochyta blight
Ascochyta spp., Phoma exigua
Asian soybean rust
Phakopsora pachyrhizi
Cercospora leaf spot
Cercospora spp.
Mycosphaerella blight
Mycosphaerella spp.
Powdery mildew
Erysiphe spp., Microsphaera diffusa
Rust
Uromyces appendiculatus
7 to 10
20 21
* Downy mildew
Peronospora spp., Phytophthora spp. 8 to 10
• Spray Interval
- Apply at 7-day to 14-day intervals.
* Suppression only
Use Restrictions
• DO NOT apply more than 10 fl ozs (0.13 lb mefentrifluconazole, 0.13 lb pyraclostrobin) per acre per application.
• DO NOT make more than 2 applications per acre per year.
• DO NOT apply more than 20 fl ozs (0.26 lb mefentrifluconazole, 0.26 lb pyraclostrobin) per acre per year.
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year of mefentrifluconazole-containing products.
• DO NOT apply more than a cumulative total of 0.29 lb ai/acre/year of pyraclostrobin-containing products.
• Bean forage, bean hay, pea vines, and pea hay may be fed no sooner than 21 days after last application.
(continued)

17
Legume Vegetables (crop group 6)
(except soybean and edamame) (continued)
Detailed Legume Vegetables (crop group 6) Crop List (except soybean and edamame; see Soybean and 
 Edamame detailed use directions)
- broad bean (fava bean), chickpea (garbanzo bean), guar, jackbean, lablab bean, lentil, pigeon pea, sword bean.
- Lupinus spp.: grain lupin, sweet lupin, white lupin, white sweet lupin.
- Phaseolus spp.: field bean, kidney bean, lima bean, navy bean, pinto bean, runner bean, snap bean, tepary bean, 
wax bean.
- Vigna spp.: adzuki bean, asparagus bean, blackeyed pea, catjang, Chinese longbean, cowpea, Crowder pea, moth 
bean, mung bean, rice bean, southern pea, urd bean, yardlong bean.
- Pisum spp.: dwarf pea, edible-pod pea, English pea, field pea, garden pea, green pea, snow pea, sugar snap pea.

18
Non-grass Forages [†]
Disease Controlled
Rate
per Acre
(fl ozs
product)
per
application
Rate
per Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Foliar
Anthracnose
Colletotrichum trifolii
Common leaf spot
Pseudopeziza medicaginis
Downy mildew
Peronospora trifoliorum
Leaf spot
Leptosphaerulina briosiani
Powdery mildew
Erysiphe spp.
Rhizoctonia blight/black patch
Rhizoctonia spp.
Rust
Phakopsora spp., Puccinia spp., Uromyces spp.
Spring black stem and leaf spot
Ascochyta medicaginicola
Stagonospora leaf spot
Stagonospora meliloti
Stemphylium leaf spot
Stemphylium spp.
Summer black stem and leaf spot
Cercospora medicaginis
Yellow leaf blotch
Leptotrichia medicaginis
7 to 10 30 14
• Spray Interval
- Apply at 14-day to 21-day intervals.
[OPTIONAL: † State-specific Restrictions - Not registered for use in California. ]
Use Restrictions
• DO NOT apply more than 10 fl ozs (0.13 lb mefentrifluconazole, 0.13 lb pyraclostrobin) per acre per application.
• DO NOT make more than 3 applications at 10 fl ozs per acre per year.
• DO NOT apply more than 30 fl ozs (0.39 lb mefentrifluconazole, 0.39 lb pyraclostrobin) per acre per year.
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year of mefentrifluconazole-containing products.
• DO NOT apply more than a cumulative total of 0.73 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply within 14 days of grazing or harvest for forage or hay. 
• DO NOT use on rangeland.
Detailed Non-grass Forages (crop group 18) Crop List - alfalfa; bean, velvet; clover (Trifolium spp., 
 Melilotus spp.); kudzu; lespedeza; lupin; sainfoin; trefoil; vetch; vetch, crown; vetch, milk.

19
Oilseeds [†]
Disease Controlled
Rate
per Acre
(fl ozs
product)
per
application
Rate
per Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Foliar
Alternaria leaf spot
Alternaria spp.
Blackleg
Leptosphaeria maculans
Blackspot
Alternaria spp.
Cercospora leaf spot
Cercospora spp.
Pasmo
Septoria linicola
Powdery mildew
Erysiphe spp.
Rust
Puccinia spp., Uromyces spp.
Septoria leaf spot
Septoria spp.
White rust
Albugo tragopogonis
7 to 10 20 21
• Spray Interval
- Apply at 7-day to 14-day intervals.
- Blackleg: Apply at 2-leaf to 4-leaf stage.
- Blackspot: Apply at early pod development.
[OPTIONAL: 
† State-specific Restrictions - Not registered for use in California. ]
Use Restrictions
• DO NOT apply more than 10 fl ozs (0.13 lb mefentrifluconazole, 0.13 lb pyraclostrobin) per acre per application.
• DO NOT make more than 2 applications at 10 fl oz per acre per year.
• DO NOT apply more than 20 fl ozs (0.26 lb mefentrifluconazole, 0.26 lb pyraclostrobin) per acre per year.
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year of mefentrifluconazole-containing products.
• DO NOT apply more than a cumulative total of 0.73 lb ai/acre/year of pyraclostrobin-containing products.
Detailed Oilseeds (crop group 20B) Crop List - calendula; castor oil plant; Chinese tallowtree; euphorbia; evening 
primrose; jojoba; niger seed; rose hip; safflower; stokes aster; sunflower; tallowwood; tea oil plant; vernonia; cultivars, 
varieties, and/or hybrids of these.

20
Peanut
Disease Controlled
Rate
per Acre
(fl ozs
product)
per
application
Rate
per Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Foliar
Early leaf spot
Cercospora arachidicola, Passalora arachidicola
Late leaf spot
Cercosporidium personatum, Nothopassalora personata
Pepper spot
Leptosphaerulina crassiasca
Rust
Puccinia arachidis
Web blotch
Phoma arachidicola
7 to 13.5
40.5 14
Rhizoctonia limb rot, Peg rot, Pod rot
Rhizoctonia solani 10 to 13.5
* Cylindrocladium black rot
Cylindrocladium crotalaria
* Sclerotinia blight
Sclerotinia minor
* Sclerotium rot, Southern blight, Southern stem rot, White mold
Sclerotium rolfsii
13.5
• Spray Interval
- Early leaf spot, Late leaf spot: Apply at 14-day to 21-day intervals.
- Rhizoctonia rot, Sclerotium rot: Apply at 14-day to 28-day intervals.
- Use the higher specified rate and/or shorter specified spray interval in fields with a history of disease.
Additives and Adjuvants - Veltyma
TM fungicide can be used with adjuvants in peanut; however, mixes with 
silicone containing adjuvants may cause crop injury under certain conditions. See Tank Mix Information sec-
tion for more information.
* Suppression only
Use Restrictions
• DO NOT apply more than 13.5 fl ozs (0.18 lb mefentrifluconazole, 0.18 lb pyraclostrobin) per acre per application.
• DO NOT make more than 3 applications at 13.5 fl ozs or 5 applications at 7 fl ozs per acre per year.
• DO NOT apply more than 40.5 fl ozs (0.54 lb mefentrifluconazole, 0.54 lb pyraclostrobin) per acre per year.
• DO NOT apply more than a cumulative total of 0.54 lb ai/acre/year of mefentrifluconazole-containing products.
• DO NOT apply more than a cumulative total of 0.73 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT graze or harvest for forage use.

21
Rapeseed (canola)
Disease Controlled
Rate
per Acre
(fl ozs
product)
per
application
Rate
per Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Foliar
Blackleg
Leptosphaeria maculans
Blackspot
Alternaria spp.
7 to 10 20 21
• Spray Interval
- Apply at 14-day intervals.
- Blackleg: Apply at the 2-leaf to 6-leaf stage.
- Blackspot: Apply at early pod development.
Use Restrictions
• DO NOT apply more than 10 fl ozs (0.13 lb mefentrifluconazole, 0.13 lb pyraclostrobin) per acre per application.
• DO NOT make more than 2 applications per acre per year.
• DO NOT apply more than 20 fl ozs (0.26 lb mefentrifluconazole, 0.26 lb pyraclostrobin) per acre per year.
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year of mefentrifluconazole-containing products.
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year of pyraclostrobin-containing products.
Detailed Rapeseed (subgroup 20A) Crop List - borage; crambe; cuphea; echium; flax seed; gold of pleasure; 
hare’s ear mustard; lesquerella; lunaria; meadowfoam; milkweed; mustard seed; oil radish; poppy seed; rapeseed, 
canola; sesame; sweet rocket; cultivars, varieties, and/or hybrids of these.

22
Small Grains (barley, oats, rye, triticale, wheat)
Disease Controlled
Rate
per Acre
(fl ozs
product)
per
application
Rate
per Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Foliar
Black point (Kernel blight or Head mold)
Cochliobolus sativus, Alternaria spp.
Crown rust
Puccinia coronata
Helminthosporium leaf spot
Drechslera avenae
Leaf blotch
Pyrenophora avenae
Leaf rust
Puccinia spp.
Net blotch
Pyrenophora teres
Powdery mildew
Blumeria spp.
Scald
Rhynchosporium secalis
Septoria leaf and glume blotch
Septoria spp., Stagonospora spp.
Spot blotch
Cochliobolus sativus
Stem rust
Puccinia graminis
Stripe rust
Puccinia striiformis
Tan spot (Yellow leaf spot)
Pyrenophora trichostoma
7 to 10 20 21
• Spray Interval
- Apply before disease develops, and continue on 14-day intervals.
- To protect the flag leaf and maximize yields in small grains, apply immediately after flag leaf emergence for 
optimum results.
- Apply no later than the beginning of flowering for oats, wheat and triticale.
- Apply no later than 50% head emergence (Feekes 10.3, Zadok’s 55) for barley and rye.
Use Restrictions
• DO NOT apply more than 10 fl ozs (0.13 lb mefentrifluconazole, 0.13 lb pyraclostrobin) per acre per application.
• DO NOT make more than 2 applications per acre per year.
• DO NOT apply more than 20 fl ozs (0.26 lb mefentrifluconazole, 0.26 lb pyraclostrobin) per acre per year.
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year of mefentrifluconazole-containing products.
• DO NOT apply more than a cumulative total of 0.29 lb ai/acre/year of pyraclostrobin-containing products.
• Not for use on rice.

23
Sorghum and Millet
Disease Controlled
Rate
per Acre
(fl ozs
product)
per
application
Rate
per Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Foliar
Anthracnose
Colletotrichum graminicola
Gray leaf spot and Cercospora leaf spot
Cercospora spp.
Northern leaf blight
Exserohilum turcicum
Rust
Puccinia spp.
Southern leaf blight and Bipolaris leaf spot
Bipolaris spp.
7 to 10 10 21
Use Restrictions
• DO NOT apply more than 10 fl ozs (0.13 lb mefentrifluconazole, 0.13 lb pyraclostrobin) per acre per application.
• DO NOT make more than 1 application per acre per year.
• DO NOT apply more than 10 fl ozs (0.13 lb mefentrifluconazole, 0.13 lb pyraclostrobin) per acre per year.
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year of mefentrifluconazole-containing products.
• DO NOT apply more than a cumulative total of 0.20 lb ai/acre/year of pyraclostrobin-containing products.
Detailed Sorghum Crop List - sorghum (milo), millet (pearl, proso).

24
Soybean and Edamame
Disease Controlled
Rate
per Acre
(fl ozs
product)
per
application
Rate
per Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Foliar
Alternaria leaf spot
Alternaria spp.
Anthracnose
Colletotrichum truncatum
Asian soybean rust
Phakopsora pachyrhizi
Brown spot
Septoria glycines
Cercospora blight/Purple seed stain
Cercospora kikuchii
Frogeye leaf spot
Cercospora sojina
Pod and Stem blight
Diaporthe phaseolorum
Rhizoctonia aerial blight
Rhizoctonia solani
7 to 10
20 21
* Southern blight
Sclerotium rolfsii 10
• Spray Interval
- Apply at 14-day intervals.
- Soybean rust: Apply before onset of infection.
* Suppression only
Use Restrictions
• DO NOT apply more than 10 fl ozs (0.13 lb mefentrifluconazole, 0.13 lb pyraclostrobin) per acre per application.
• DO NOT make more than 2 applications per acre per year.
• DO NOT apply more than 20 fl ozs (0.26 lb mefentrifluconazole, 0.26 lb pyraclostrobin) per acre per year.
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year to soybean of mefentrifluconazole-containing 
products.
• DO NOT apply more than a cumulative total of 0.39 lb/ai/acre/year to edamame of mefentrifluconazole-containing 
products.
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year to soybean of pyraclostrobin-containing 
products.
• DO NOT apply more than a cumulative total of 0.29 lb/ai/acre/year to edamame of pyraclostrobin-containing 
products.
• Soybean forage may be fed no sooner than 14 days after last application. Soybean hay may be fed no sooner than 
21 days after last treatment.

25
Sugar Beet
Disease Controlled
Rate
per Acre
(fl ozs
product)
per
application
Rate
per Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Foliar
Cercospora leaf spot
Cercospora beticola
Powdery mildew
Erysiphe betae
7 to 10 20 7
• Spray Interval
- Apply at 14-day intervals.
• Aids in the control of Rhizoctonia stem canker and crown rot.
Use Restrictions
• DO NOT apply more than 10 fl ozs (0.13 lb mefentrifluconazole, 0.13 lb pyraclostrobin) per acre per application.
• DO NOT make more than 2 applications per acre per year.
• DO NOT apply more than 20 fl ozs (0.26 lb mefentrifluconazole, 0.26 lb pyraclostrobin) per acre per year.
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year of mefentrifluconazole-containing products.
• DO NOT apply more than a cumulative total of 0.78 lb ai/acre/year of pyraclostrobin-containing products.

26
Sugarcane [†]
Disease Controlled
Rate
per Acre
(fl ozs
product)
per
application
Rate
per Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Infurrow
Sugarcane pineapple disease
Ceratocystis paradoxa
Rhizoctonia seed and seedling rot
Rhizoctonia solani
* Fusarium seed rot, Seedling blight
Fusarium spp. 7 to 10 20 14
Foliar
Brown rust
Puccinia melanocephala
Orange rust
Puccinia kuehnii
• Spray Interval
- Apply at 14-day to 28-day intervals.
* Suppression only
[OPTIONAL: † State-specific Restrictions - Not registered for use in California. ]
Use Restrictions
• DO NOT apply more than 10 fl ozs (0.13 lb mefentrifluconazole, 0.13 lb pyraclostrobin) per acre per application.
• DO NOT make more than 2 applications at 10 fl ozs per acre per year.
• DO NOT apply more than 20 fl ozs (0.26 lb mefentrifluconazole, 0.26 lb pyraclostrobin) per acre per year.
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year of mefentrifluconazole-containing products.
• DO NOT apply more than a cumulative total of 0.78 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply this product to sugarcane through any type of irrigation system.
• DO NOT feed treated sugarcane commodities to livestock.
• Aerial Application - DO NOT use less than 5 gallons of spray solution per acre. VeltymaTM fungicide can be 
applied by ground or air.
SUGARCANE ONLY Infurrow and Soil-directed Banded Rates
Rate per 
1000 Row Feet 
(fl ozs product)
Product Rate 
(fl ozs/A) 
Row width (feet)
5 feet 6 feet
0.80 7.0
0.92 8.0
0.96 7.0
1.03 9.0
1.10 8.0
1.15 10.0
1.24 9.0
1.38 10.0

27
Tuberous and Corm Vegetables (including potato - subgroup 1C)
Disease Controlled
Rate
per Acre
(fl ozs
product)
per
application
Rate
per Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Foliar
Black dot
Colletotrichum coccodes
Brown spot, Black pit
Alternaria alternata
Early blight
Alternaria solani
5 to 10
30 7
* Late blight
Phytophthora infestans
Powdery mildew
Erysiphe spp., Leveillula spp.
10
• Spray Interval
- Apply before the onset of disease and on a minimum interval of 14 days.
- Late blight: Follow application with a labeled non-Group 11 late blight specific fungicide 5 to 7 days later.
* Suppression only 
Use Restrictions
• DO NOT apply more than 10 fl ozs (0.13 lb mefentrifluconazole, 0.13 lb pyraclostrobin) per acre per application.
• DO NOT make more than 3 applications at 10 fl ozs per acre per year.
• DO NOT apply more than 30 fl ozs (0.39 lb mefentrifluconazole, 0.39 lb pyraclostrobin) per acre per year.
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year of mefentrifluconazole-containing products.
• DO NOT apply more than a cumulative total of 1.18 lbs ai/acre/year of pyraclostrobin-containing products.
Detailed Tuberous and Corm Vegetables (subgroup 1C) Crop List - arracacha; arrowroot; artichoke, Chinese; 
 artichoke, Jerusalem; canna, edible; cassava, bitter and sweet; chayote (root); chufa; dasheen (taro); ginger; leren; 
potato; sweet potato; tanier; turmeric; yam bean; yam, true.

28
Conditions of Sale and Warranty
The Directions For Use of this product reflect the 
 opinion of experts based on field use and tests. The 
 directions are believed to be reliable and must be 
followed carefully. However, it is impossible to eliminate 
all risks inherently associated with the use of this 
product. Crop injury, ineffectiveness or other unintended 
consequences may result because of such factors as 
weather conditions, presence of other materials, or use 
of the product in a manner inconsistent with its labeling, 
all of which are beyond the control of BASF 
CORPORATION (“BASF”) or the Seller. To the extent 
consistent with applicable law, all such risks shall be 
assumed by the Buyer.
BASF warrants that this product conforms to the 
chemical description on the label and is reasonably fit for 
the purposes referred to in the Directions For Use , 
subject to the inherent risks, referred to above.
TO THE EXTENT CONSISTENT WITH APPLICABLE 
LAW, BASF MAKES NO OTHER EXPRESS OR 
IMPLIED WARRANTY OF FITNESS OR 
 MERCHANTABILITY OR ANY OTHER EXPRESS OR 
IMPLIED WARRANTY.
TO THE EXTENT CONSISTENT WITH APPLICABLE 
LAW, BUYER’S EXCLUSIVE REMEDY AND BASF’S 
EXCLUSIVE LIABILITY, WHETHER IN CONTRACT, 
TORT, NEGLIGENCE, STRICT LIABILITY, OR 
 OTHERWISE, SHALL BE LIMITED TO REPAYMENT 
OF THE PURCHASE PRICE OF THE PRODUCT.
TO THE EXTENT CONSISTENT WITH APPLICABLE 
LAW, BASF AND THE SELLER DISCLAIM ANY 
 LIABILITY FOR CONSEQUENTIAL, EXEMPLARY, 
SPECIAL OR INDIRECT DAMAGES RESULTING 
FROM THE USE OR HANDLING OF THIS 
PRODUCT.
BASF and the Seller offer this product, and the Buyer 
and User accept it, subject to the foregoing Conditions 
of Sale and Warranty which may be varied only by 
 agreement in writing signed by a duly authorized 
representative of BASF. 
1108
© 2020 BASF Corporation
All rights reserved.
007969-00409.20200729b.NVA 2020-04-554-0138
Supersedes: NVA 2020-04-554-0118
Supplemental: NVA 2020-04-554-0147
BASF Corporation
26 Davis Drive
Research Triangle Park, NC 27709
Veltyma is a trademark of BASF.

BASF Corporation 
26 Davis Drive, Research Triangle Park, NC 27709 
Supplemental Label 
 
For disease control in grasses, grass grown for seed, non-grass forages, 
oilseeds, sugar beet, and sugarcane 
This supplemental label expires October 30, 2023, and must not be used or distributed after this date. 
Active Ingredients*: 
mefentrifluconazole: 2-[4-(4-chlorophenoxy)-2-(trifluoromethyl)phenyl]-1- 
(1H-1,2,4-triazole-1-yl)propan-2-ol .................................................................................................................. 17.56% 
pyraclostrobin: (carbamic acid, [2-[[[1-(4-chlorophenyl)-1H-pyrazol-3- 
yl]oxy]methyl]phenyl]methoxy-, methyl ester) ................................................................................................... 17.56% 
Other Ingredients**: ....................................................................................................................................... 64.88% 
Total: ............................................................................................................................................................... 100.00% 
* Veltyma™ fungicide contains 1.67 lbs mefentrifluconazole and 1.67 lbs pyraclostrobin per gallon. 
EPA Reg. No. 7969-409 
CAUTION/PRECAUCION 
Directions For Use 
x It is a violation of federal law to use this product in a 
manner inconsistent with its labeling. 
x The supplemental labeling and the entire 
Veltyma™ fungicide container label, EPA Reg. No. 
7969-409, must be in possession of the user at the 
time of application. 
x Read the label affixed to the container for 
Veltyma before applying. 
x Use of Veltyma according to this labeling is subject 
to the use precautions and limitations imposed by 
the label affixed to the container for Veltyma. 
Application Instructions 
Refer to the Veltyma container label for additional 
instructions and restrictions. 
Mefentrifluconazole Group 3 Fungicide 
Pyraclostrobin Group 11 Fungicide 
11/12/2020
7969-409

2 
Crop Rotation Restrictions 
Rotational Crops: Please see the following table for 
crop rotational restrictions. 
Crop or Crop Group 
Rotation 
Interval 
Brassicas including broccoli, 
cauliflower and head cabbages (crop 
group 5-16) 
Bulb vegetables including bulb onion, 
spring onion and garlic (crop group 
3-07) 
Cereals, including wheat, oats, barley, 
triticale, rye, rice and corn (crop 
group 15 and crop group 16) 
Cucurbits including cucumber, squash 
and melons (crop group 9) 
Fruiting vegetables including tomato, 
eggplant, peppers (crop group 8-10) 
Fresh herbs 
Grass and non-grass animal feeds 
including alfalfa and clover (crop 
group 17 and crop group 18) 
Leafy vegetables including lettuces, 
spinach and leafy cabbages (crop 
group 4-16) 
Legume vegetables including soybean 
(crop group 6 and crop group 7) 
Low-growing berries including 
strawberries (crop group 13-07G) 
Oilseeds including cotton, sunflower 
and canola (crop group 20) 
Peanut 
Root and tuber vegetables including 
carrot, potato, beets and sugar beet 
(crop group 1 and crop group 2) 
Stalk, stem and leaf petiole vegetables 
including celery and asparagus (crop 
group 22) 
Sugarcane 
Any other crop labeled for direct 
application of a product containing 
mefentrifluconazole 
May be 
planted 
immediately 
following the 
last 
application 
Other food and feed crops, not listed 
above 
May not be 
planted in 
rotation

3 
Detailed Use Directions 
Labeled Crops 
 
Foliar 
• When conditions favor disease or disease pressure is high: 
- Use the shorter specified interval. 
- For a rate range, use the higher specified rate. 
• DO NOT make more than two (2) sequential applications of Veltyma™ fungicide before alternating to a 
labeled non-Group 3 or non-Group 11 fungicide, unless otherwise specified in the following crop-
specific use sections. 
 
 
 Use Rate Conversion 
fl ozs product/A lb mefentrifluconazole/A lb pyraclostrobin/A 
5 0.07 0.07 
7 0.09 0.09 
8 0.10 0.10 
10 0.13 0.13 
13.5 0.18 0.18 
20 0.26 0.26 
30 0.39 0.39 
40.5 0.53 0.53 
 
State-specific Restrictions - Not for sale, distribution, or use in Nassau and Suffolk counties in New York State.

4 
 
Grasses 
 
 
 Disease Controlled 
Rate per 
Acre 
(fl ozs 
product) 
per 
application 
Rate per 
Acre 
(fl ozs 
product) 
maximum 
per year 
PHI 
(days) 
Foliar 
Anthracnose 
Colletotrichum spp. 
7 to 10 30 0 
Leaf Spot/Blight 
Bipolaris spp., Cochliobolus spp., Drechslera spp., 
Stagonospora spp. 
Net Blotch 
Drechslera spp., Helminthosporium spp. 
Powdery Mildew 
Erysiphe spp. 
Purple Leaf Spot 
Stagonospora spp. 
Rust 
Puccinia spp., Uromyces dactylidis 
Septoria Leaf Spot 
Septoria spp. 
• Spray Interval 
- Apply at 14-day to 21-day intervals. 
 
 
Use Restrictions 
• DO NOT apply more than 10 fl ozs (0.13 lb mefentrifluconazole, 0.13 lb pyraclostrobin) per acre per application. 
• DO NOT make more than 3 applications at 10 fl ozs per acre per year. 
• DO NOT apply more than 30 fl ozs (0.39 lb mefentrifluconazole, 0.39 lb pyraclostrobin) per acre per year. 
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year of mefentrifluconazole-containing products. 
• DO NOT apply more than a cumulative total of 0.73 lb ai/acre/year of pyraclostrobin-containing products. 
Detailed Grasses (crop group 17) Crop List - any grass, Gramineae family (either green or cured) that will be fed 
to or grazed by livestock, all pasture and range grasses and grasses grown for hay or silage, except sugarcane 
and those included in the cereal grains group.

5 
 
Grass Grown for Seed 
 
 
 Disease Controlled 
Rate per 
Acre 
(fl ozs 
product) 
per 
application 
Rate per 
Acre 
(fl ozs 
product) 
maximum 
per year 
PHI 
(days) 
Foliar 
Powdery mildew 
Erysiphe spp. 
Rust 
Puccinia spp. 
7 to 10 20 0 
• Spray Interval 
- Apply at 14-day to 21-day intervals. 
 
 
Use Restrictions 
• DO NOT apply more than 10 fl ozs (0.13 lb mefentrifluconazole, 0.13 lb pyraclostrobin) per acre per application. 
• DO NOT make more than 2 applications at 10 fl ozs per acre per year. 
• DO NOT apply more than 20 fl ozs (0.26 lb mefentrifluconazole, 0.26 lb pyraclostrobin) per acre per year. 
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year of mefentrifluconazole-containing products. 
• DO NOT apply more than a cumulative total of 0.73 lb ai/acre/year of pyraclostrobin-containing products. 
Detailed Grass Grown for Seed (crop group 17) Crop List - any grass, Gramineae family (either green or 
cured) that will be fed to or grazed by livestock, all pasture and range grasses and grasses grown for hay or silage, 
except sugarcane and those included in the cereal grains group.

6 
 
Non-grass Forages 
 
 
 Disease Controlled 
Rate per 
Acre 
(fl ozs 
product) 
per 
application 
Rate per 
Acre 
(fl ozs 
product) 
maximum 
per year 
PHI 
(days) 
Foliar 
Anthracnose 
Colletotrichum trifolii 
Common leaf spot 
Pseudopeziza medicaginis 
Downy mildew 
Peronospora trifoliorum 
Leaf spot 
Leptosphaerulina briosiani 
Powdery mildew 
Erysiphe spp. 
Rhizoctonia blight/black patch 
Rhizoctonia spp. 
Rust 
Phakopsora spp., Puccinia spp., Uromyces spp. 
Spring black stem and leaf spot 
Ascochyta medicaginicola 
Stagonospora leaf spot 
Stagonospora meliloti 
Stemphylium leaf spot 
Stemphylium spp. 
Summer black stem and leaf spot 
Cercospora medicaginis 
Yellow leaf blotch 
Leptotrichia medicaginis 
7 to 10 30 14 
• Spray Interval 
- Apply at 14-day to 21-day intervals. 
 
 
Use Restrictions 
• DO NOT apply more than 10 fl ozs (0.13 lb mefentrifluconazole, 0.13 lb pyraclostrobin) per acre per application. 
• DO NOT make more than 3 applications at 10 fl ozs per acre per year. 
• DO NOT apply more than 30 fl ozs (0.39 lb mefentrifluconazole, 0.39 lb pyraclostrobin) per acre per year. 
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year of mefentrifluconazole-containing products. 
• DO NOT apply more than a cumulative total of 0.73 lb ai/acre/year of pyraclostrobin-containing products. 
• DO NOT apply within 14 days of grazing or harvest for forage or hay. 
• DO NOT use on rangeland. 
Detailed Non-grass Forages (crop group 18) Crop List - alfalfa; bean, velvet; clover (Trifolium spp., 
Melilotus spp.); kudzu; lespedeza; lupin; sainfoin; trefoil; vetch; vetch, crown; vetch, milk.

7 
 
Oilseeds 
 
 
 Disease Controlled 
Rate per 
Acre 
(fl ozs 
product) 
per 
application 
Rate per 
Acre 
(fl ozs 
product) 
maximum 
per year 
PHI 
(days) 
Foliar 
Alternaria leaf spot 
Alternaria spp. 
Blackleg 
Leptosphaeria maculans 
Blackspot 
Alternaria spp. 
Cercospora leaf spot 
Cercospora spp. 
Pasmo 
Septoria linicola 
Powdery mildew 
Erysiphe spp. 
Rust 
Puccinia spp., Uromyces spp. 
Septoria leaf spot 
Septoria spp. 
White rust 
Albugo tragopogonis 
7 to 10 20 21 
• Spray Interval 
- Apply at 7-day to 14-day intervals. 
- Blackleg: Apply at 2-leaf to 4-leaf stage. 
- Blackspot: Apply at early pod development. 
 
 
Use Restrictions 
• DO NOT apply more than 10 fl ozs (0.13 lb mefentrifluconazole, 0.13 lb pyraclostrobin) per acre per application. 
• DO NOT make more than 2 applications at 10 fl oz per acre per year. 
• DO NOT apply more than 20 fl ozs (0.26 lb mefentrifluconazole, 0.26 lb pyraclostrobin) per acre per year. 
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year of mefentrifluconazole-containing products. 
• DO NOT apply more than a cumulative total of 0.73 lb ai/acre/year of pyraclostrobin-containing products. 
Detailed Oilseeds (crop group 20B) Crop List - calendula; castor oil plant; Chinese tallowtree; euphorbia; evening 
primrose; jojoba; niger seed; rose hip; safflower; stokes aster; sunflower; tallowwood; tea oil plant; vernonia; 
cultivars, varieties, and/or hybrids of these.

8 
 
Sugar Beet 
 
 Disease Controlled 
Rate per 
Acre 
(fl ozs 
product) 
per 
application 
Rate per 
Acre 
(fl ozs 
product) 
maximum 
per year 
PHI 
(days) 
Foliar 
Cercospora leaf spot 
Cercospora beticola 
Powdery mildew 
Erysiphe betae 
7 to 10 20 7 
• Spray Interval 
- Apply at 14-day intervals. 
• Aids in the control of Rhizoctonia stem canker and crown rot. 
 
 
Use Restrictions 
• DO NOT apply more than 10 fl ozs (0.13 lb mefentrifluconazole, 0.13 lb pyraclostrobin) per acre per application. 
• DO NOT make more than 2 applications per acre per year. 
• DO NOT apply more than 20 fl ozs (0.26 lb mefentrifluconazole, 0.26 lb pyraclostrobin) per acre per year. 
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year of mefentrifluconazole-containing products. 
• DO NOT apply more than a cumulative total of 0.78 lb ai/acre/year of pyraclostrobin-containing products.

9 
 
Sugarcane 
 
 
 Disease Controlled 
Rate per 
Acre 
(fl ozs 
product) 
per 
application 
Rate per 
Acre 
(fl ozs 
product) 
maximum 
per year 
PHI 
(days) 
Infurrow 
Sugarcane pineapple disease 
Ceratocystis paradoxa 
Rhizoctonia seed and seedling rot 
Rhizoctonia solani 
* Fusarium seed rot, Seedling blight 
Fusarium spp. 7 to 10 20 14 
Foliar 
Brown rust 
Puccinia melanocephala 
Orange rust 
Puccinia kuehnii 
• Spray Interval 
- Apply at 14-day to 28-day intervals. 
 
 
* Suppression only 
Use Restrictions 
• DO NOT apply more than 10 fl ozs (0.13 lb mefentrifluconazole, 0.13 lb pyraclostrobin) per acre per application. 
• DO NOT make more than 2 applications at 10 fl ozs per acre per year. 
• DO NOT apply more than 20 fl ozs (0.26 lb mefentrifluconazole, 0.26 lb pyraclostrobin) per acre per year. 
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year of mefentrifluconazole-containing products. 
• DO NOT apply more than a cumulative total of 0.78 lb ai/acre/year of pyraclostrobin-containing products. 
• DO NOT apply this product to sugarcane through any type of irrigation system. 
• DO NOT feed treated sugarcane commodities to livestock. 
• Aerial Application - DO NOT use less than 5 gallons of spray solution per acre. VeltymaTM fungicide can 
be applied by ground or air. 
SUGARCANE ONLY Infurrow and Soil-directed Banded Rates 
Rate per 
1000 Row Feet 
(fl ozs product) 
Product Rate 
(fl ozs/A) 
Row width (feet) 
5 feet 6 feet 
0.80 7.0 
0.92 8.0 
0.96 7.0 
1.03 9.0 
1.10 8.0 
1.15 10.0 
1.24 9.0 
1.38 10.0

10 
Conditions of Sale and Warranty 
The Directions For Use of this product reflect the 
opinion of experts based on field use and tests. The 
directions are believed to be reliable and must be 
followed carefully. However, it is impossible to 
eliminate all risks inherently associated with the use of 
this product. Crop injury, ineffectiveness or other 
unintended consequences may result because of such 
factors as weather conditions, presence of other 
materials, or use of the product in a manner 
inconsistent with its labeling, all of which are beyond 
the control of BASF CORPORATION (“BASF”) or the 
Seller. To the extent consistent with applicable law, all 
such risks shall be assumed by the Buyer. 
BASF warrants that this product conforms to the 
chemical description on the label and is reasonably fit 
for the purposes referred to in the Directions For 
Use, subject to the inherent risks, referred to above. 
TO THE EXTENT CONSISTENT WITH APPLICABLE 
LAW, BASF MAKES NO OTHER EXPRESS OR 
IMPLIED WARRANTY OF FITNESS OR 
MERCHANTABILITY OR ANY OTHER EXPRESS 
OR IMPLIED WARRANTY. 
TO THE EXTENT CONSISTENT WITH APPLICABLE 
LAW, BUYER’S EXCLUSIVE REMEDY AND 
BASF’S EXCLUSIVE LIABILITY, WHETHER IN 
CONTRACT, TORT, NEGLIGENCE, STRICT 
LIABILITY, OR OTHERWISE, SHALL BE LIMITED 
TO REPAYMENT OF THE PURCHASE PRICE OF 
THE PRODUCT. 
TO THE EXTENT CONSISTENT WITH APPLICABLE 
LAW, BASF AND THE SELLER DISCLAIM ANY 
LIABILITY FOR CONSEQUENTIAL, EXEMPLARY, 
SPECIAL OR INDIRECT DAMAGES RESULTING 
FROM THE USE OR HANDLING OF THIS 
PRODUCT. 
BASF and the Seller offer this product, and the Buyer 
and User accept it, subject to the foregoing 
Conditions of Sale and Warranty which may be 
varied only by agreement in writing signed by a duly 
authorized representative of BASF. 
1108 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Veltyma is a trademark of BASF. 
 
 
 
© 2020 BASF Corporation 
All rights reserved. 
 
007969-00409.20200730b.NVA 2020-04-554-0147 
Based on: NVA 2020-04-554-0138 
 
BASF Corporation 
26 Davis Drive 
Research Triangle Park, NC 27709