crop-chem-docs/corpus/epa_ppls/9779-320.md

# TERRANIL 6L

- EPA Reg No: **9779-320**
- Registrant: WINFIELD SOLUTIONS, LLC
- Signal word: Warning
- Active ingredients: Chlorothalonil (54%)
- Label accepted: 2016-09-01
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/009779-00320-20160901.pdf

---
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY
 WASHINGTON, DC 20460


Fast Track Label Acceptable v.20150320
OFFICE OF CHEMICAL SAFETY
AND POLLUTION PREVENTION

September 1, 2016
Lisa Mathias
Product Registration Specialist
Winfield Solutions LLC
PO Box 64589
St. Paul, MN 55164

Subject: Label Amendment: Adds Me-Too crops: Napa cabbage, Chinese Mustard, Cavalo
Broccoli, Kohlrabi, Cucurbit, Chinese waxgourd, Gourds, Balsam Apple, Bitter Melon; Eggplant,
Groundcherry, Okra, Pepino, Pepper (includes bell pepper, chili pepper, cooking pepper, pimento,
sweet pepper), Tomatillo, Ginseng, Horseradish, Lupine, Lentil; Persimmon (Florida and Hawaii
only), Rhubarb, Yam, Boston Fern, Florida Ruffle Fern, Leatherleaf Fern. Other minor changes
throughout the label
Product Name: Terranil 6L
EPA Registration Number: 9779-320
Application Date: March 17, 2016
Decision Number: 517622

Dear Ms. Mathias:

The amended label referred to above, submitted in connection with registration under the Federal
Insecticide, Fungicide and Rodenticide Act, as amended, is acceptable. This approval does not
affect any conditions that were previously imposed on this registration. You continue to be
subject to existing conditions on your registration and any deadlines connected with them.

A stamped copy of your labeling is enclosed for your records. This labeling supersedes all
previously accepted labeling. You must submit one copy of the final printed labeling before you
release the product for shipment with the new labeling. In accordance with 40 CFR 152.130(c),
you may distribute or sell this product under the previously approved labeling for 18 months
from the date of this letter. After 18 months, you may only distribute or sell this product if it
bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is
defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3.

Should you wish to add/retain a reference to the company’s website on your label, then please be
aware that the website becomes labeling under the Federal Insecticide Fungicide and Rodenticide
Act and is subject to review by the Agency. If the website is false or misleading, the product
would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40
CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In addition,
regardless of whether a website is referenced on your product’s label, claims made on the
website may not substantially differ from those claims approved through the registration process.
Therefore, should the Agency find or if it is brought to our attention that a website contains false

Page 2 of 2
EPA Reg. No. 9779-320
Decision No. 517622

or misleading statements or claims substantially differing from the EPA approved registration,
the website will be referred to the EPA’s Office of Enforcement and Compliance.

Your release for shipment of the product constitutes acceptance of these conditions. If these
conditions are not complied with, the registration will be subject to cancellation in accordance
with FIFRA section 6.

If you have any questions, please contact Tony Kish by phone at 703 308-9443, or via email at
kish.tony@epa.gov; or Craig Reeves by phone at 703 347-0486, or via email at
reeves.craig@epa.gov


Enclosure: Stamped Accepted Label

Sincerely,

Tony Kish, Product Manager 22
Fungicide Branch
Registration Division (7505P)
Office of Pesticide Programs

Page 1 of 27
TERRANIL® 6L
Flowable Agricultural Fungicide
GROUP M5 FUNGICIDE
ACTIVE INGREDIENT
Chlorothalonil (tetrachloroisophthalonitrile)...................... 54.0%
OTHER INGREDIENTS....................................................... 46.0%
TOTAL ................................................................................. 100.0%
Contains 6 pounds chlorothalonil per gallon.
KEEP OUT OF REACH OF CHILDREN
WARNING/AVISO
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle.
(If you do not understand this label, find someone to explain it to you in detail.)
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
WARNING
Causes substantial but temporary eye injury. May be fatal if inhaled. Harmful if absorbed through
skin. Avoid contact with skin, eyes, or clothing. Harmful if swallowed. Do not breathe vapor or
spray mist.
FIRST AID
If inhaled x Move person to fresh air.
x If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably
mouth-to-mouth, if possible.
x Call a poison control center or doctor for further treatment advice.
If in eyes x Hold eye open and rinse slowly and gently with water for 15-20 minutes.
x Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye.
x Call a poison control center or doctor for treatment advice.
If swallowed x Call a poison control center or doctor immediately for treatment advice.
x Have person sip a glass of water if able to swallow.
x Do not induce vomiting unless told to do so by the poison control center or doctor.
x Do not give anything by mouth to an unconscious person.
If on skin or
clothing
x Take off contaminated clothing.
x Rinse skin immediately with plenty of water for 15-20 minutes.
x Call a poison control center or doctor for treatment advice.
Have the product container or label with you when calling a poison control center or doctor, or going for treatment. For
additional information in case of medical emergency, call toll free 1-877-424-7452.
SEE INSIDE PANEL FOR ADDITIONAL PRECAUTIONARY STATEMENTS
EPA Reg. No. 9779-320 EPA Est. No. _____
Distributed By:
Winfield Solutions LLC
P.O. Box 64589
St. Paul, MN 55164-0589
NET CONTENTS
1/0517/6
09/01/2016
9779-320

Page 2 of 27
PERSONAL PROTECTIVE EQUIPMENT (PPE)
WPS Uses
Mixers, loaders, applicators and all other handlers must wear: - Long-sleeved shirt and long pants, - Chemical-
resistant gloves made of any waterproof material – Category A (e.g., barrier laminate, butyl rubber, nitrile rubber,
neoprene rubber, natural rubber, polyethylene, polyvinyl chloride (PVC) or viton)- Shoes plus socks,- Protective
eyewear, and
- A dust/mist filtering respirator (MSHA/NIOSH approval number prefix TC-21C), or a NIOSH approved respirator
with any N, R, P or HE filter.
Non-WPS Uses
Applicators and other handlers who handle this pesticide for any use NOT covered by the Worker Protection Standard
(40 CFR Part 170) – in general, only agricultural plant uses are covered – must wear:
- Long-sleeved shirt and long pants,
- Chemical-resistant gloves made of any waterproof material – Category A (e.g., barrier laminate, butyl rubber, nitrile
rubber, neoprene rubber, natural rubber, polyethylene, polyvinyl chloride (PVC) or viton),
- Shoes plus socks, and
- Protective eyewear.
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables, use detergent
and hot water. Keep and wash PPE separately from other laundry.
Engineering Control Statements
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker
Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d) (4-6)], the handler PPE requirements may be
reduced or modified as specified in the WPS.
USER SAFETY RECOMMENDATIONS
Users should wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. Remove clothing
immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. Remove PPE immediately
after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and
change into clean clothing.
ENVIRONMENTAL HAZARDS
This pesticide is toxic to aquatic invertebrates and wildlife. Do not apply directly to water or to areas where surface
water is present or to intertidal areas below the mean highw ater mark. Drift and runoff may be hazardous to aquatic
organisms in neighboring areas. Do not contaminate water when disposing of equipment washwater or rinsate.
This chemical is known to leach through soil into groundwater under certain conditions as a result of label use. Use
of this chemical in areas where soils are permeable, par ticularly where the water table is shallow, may result in
groundwater contamination.
This chemical can contaminate surface water through spray drift. Under some conditions, it may also have a high
potential for runoff into surface water for several days to weeks after application. These include poorly draining or
wet soils with readily visible slopes toward adjacent surf ace waters, frequently flooded areas, areas overlaying
extremely shallow groundwater, areas with in-field canals or ditches that drain to surface water, areas not separated
from adjacent surface waters with vegetated filter strips, and areas overlying tile drainage systems that drain to surface
water.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only
protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult
the agency responsible for pesticide regulation.
Do not apply when wind speed favors drift beyond the area intended for treatment.

Page 3 of 27
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard (WPS), 40 CFR part 170.
This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and
greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification,
and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label
about personal protective equipment (PPE), and restricted-entry interval. The requirements in this box only apply to
uses of this product that are covered by the Worker Protection Standard.
Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours.
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves
contact with anything that has been treated, such as plants, soil, or water, is: coveralls, chemical-resistant gloves made
of any waterproof material, shoes plus socks and protective eyewear.
Special Eye Irritation Provisions: This product is a severe eye irritant. Although the restricted entry interval expires
after 12 hours, for the next 6.5 days entry is permitted only when the following safety measures are provided:
(1) At least one container designed specifically for flushing eyes must be available in operating condition at the WPS
required decontamination site intended for workers entering the treated area.
(2) Workers must be informed in a manner they can understand:
x that residues in the treated area may be highly irritating to their eyes,
x that they should take precautions, such as refraining from rubbing their eyes, to keep the residues out of their eyes,
x that if they do get residues in their eyes, they should immediately flush their eyes using the eyeflush container that
is located at the decontamination site or using other readily available clean water, and
x how to operate the eyeflush container.
NON-AGRICULTURAL USE REQUIREMENTS
The requirements in this box apply to uses of this product that are NOT within the scope of the Worker Protection
Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce agricultural
plants on farms, forests, nurseries, or greenhouses.
DO NOT enter or allow others to enter area until sprays have dried.
STORAGE AND DISPOSAL
DO NOT CONTAMINATE WATER, FOOD, OR FEED BY STORAGE OR DISPOSAL
Pesticide Storage: Store in a cool place. Protect from excessive heat.
Pesticide Disposal: Pesticide wastes are toxic. Improper disposal of excess pesticide, pesticide spray, or rinsate is a
violation of Federal law. If these wastes cannot be disposed of by use according to label instructions, contact your State
Pesticide or Environmental Control Agency, or the Hazardous Waste representative at the nearest EPA Regional Office
for guidance.
Container Disposal:Use label language appropriate for container size and type.
Nonrefillable container. Do not reuse or refill this container. Clean container promptly after emptying.
Nonrefillable container equal to or less than 5 gallons. Triple rinse as follows: Empty the remaining contents into
application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container ¼ full
with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate
for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times.
Then offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill or by incineration, or, if
allowed by State and local authorities, by burning. If burned, stay out of smoke.
Nonrefillable container greater than 5 gallons. Triple rinse as follows: Empty the remaining contents into
application equipment or a mix tank. Fill the container ¼ full with water. Replace and tighten closures. Tip container
on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container
on its end and tip it back and forth several times. Turn the container over onto its other end and tip it back and forth

Page 4 of 27
several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal.
Repeat this procedure two more times. Then offer for recycling or reconditioning, or puncture and dispose of in a
sanitary landfill or by incineration, or, if allowed by State and local authorities, by burning. If burned, stay out of smoke.
Refillable container. Refill this container with pesticide only. Do not reuse this container for any other purpose.
Cleaning the container before final disposal is the responsibility of the person disposing of the container. Cleaning
before refilling is the responsibility of the refiller. To clean the container before final disposal, empty the remaining
contents from this container into application equipment or mix tank. Fill the container about 10 percent full with
water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application
equipment or rinsate collection system. Repeat this rinsin g procedure two more times. Then offer for recycling or
reconditioning, or puncture and dispose of in a sanitary landfill or by incineration, or, if allowed by State and local
authorities, by burning. If burned, stay out of smoke.
FOR CHEMICAL EMERGENCY: Spill, leak, fire, exposure, or accident, call
CHEMTREC 1-800-424-9300
GENERAL INSTRUCTIONS AND INFORMATION
Application and Calibration Techniques for Sprinkler Irrigation
Apply this product only through the following types of irrigation systems. Do not apply this product through any other
type of irrigation system. Crop injury, lack of effectiveness, or illegal pesticide residues in the crop can result from
nonuniform distribution of treated water. If you have questions about calibration, you should contact State Experiment
Station specialists, equipment manufacturers, or other experts. Do not connect an irrigation system (including greenhouse
systems) used for pesticide application to a public water system unless the pesticide label-prescribed safety devices for
public water systems are in place. A person knowledgeable of the chemigation system and responsible for its operation,
or under the supervision of the responsible person, shall shut the system down and make necessary adjustments should
the need arise.
A. Center Pivot, Traveler, Big Gun, Motorized Lateral Move, End Tow, and Side (Wheel) Roll Irrigation Equipment:
Operate system and injection equipment at normal pressures recommended by the manufacturer of injection equipment
used. Fill tank of injection equipment with water. Operate system for one complete circle for center pivot or one complete
run for the other recommended equipment, measuring time required, amount of water injected, and acreage contained in
circle or run. Mix recommended amount of TERRANIL 6L for acreage to be covered into same amount of water used
during calibration and inject into system continuously for one revolution or run, but continue to operate irrigation system
until TERRANIL 6L has been cleared from last sprinkler head. Spray mixture in the chemical supply tank must be
agitated at all times, otherwise settling and uneven application may occur.
B. Solid Set and Hand Move Irrigation Equipment: Determine acreage covered by sprinkler. Fill tank of injection
equipment with water and adjust flow to use contents over a thirty to forty-five minute period. Mix desired amount of
TERRANIL 6L for acreage to be covered into quantity of water used during calibration and operate entire system at
normal pressures recommended by the manufacturer of injection equipment used for amount of time established during
calibration. Provide constant mechanical agitation in the mix tank to insure that TERRANIL 6L will remain in suspension
during the injection cycle. TERRANIL 6L can be injected at the beginning or end of the irrigation cycle or as a separate
application. Stop injection equipment after treatment is completed and continue to operate irrigation system until the
product is cleared from last sprinkler head.
Safety Devices
(1) The systems designated above must contain a functional check valve, vacuum relief valve, and low pressure drain
appropriately located on the irrigation pipeline to prevent water source contamination from backflow. (2) All pesticide
injection pipelines must contain a functional, automatic, quick-closing check valve to prevent the flow of fluid back
toward the injection pump. (3) The pesticide injection pipeline must also contain a functional, normally closed, solenoid-
operated valve located on the intake side of the injection pump and connected to the system interlock to prevent fluid
from being withdrawn from the supply tank when the irrigation system is either automatically or manually shut down.
(4) The system must contain functional interlocking controls to automatically shut off the pesticide injection pump when
the water pump motor stops. (5) The irrigation line or water pump must include a functional pressure switch which will
stop the water pump motor when the water pressure decrease s to the point where pesticide distribution is adversely

Page 5 of 27
affected. (6) Systems must use a metering pump, such as a positive displacement injection pump (e.g., diaphragm pump)
effectively designed and constructed of materials that are compatible with pesticides and capable of being fitted with a
system interlock. (7) Do not apply when wind speed favors drift beyond the area intended for treatment.
Systems Connected to Public Water Sources
Public water system means a system for the provision to the public of piped water for human consumption if such system
has at least 15 service connections or regularly serves an average of at least 25 individuals daily at least 60 days out of
the year.
Chemigation systems connected to public water systems must contain a functional, reduced-pressure zone, backflow
preventer (RPZ) or the functional equivalent in the water supply line upstream from the point of pesticide introduction.
As an option to the RPZ, the water from the public water system should be discharged into a reservoir tank prior to
pesticide introduction. There shall be a complete physical break (air gap) between the outlet end of the fill pipe and the
top or overflow rim of the reservoir tank of at least twice the inside diameter of the fill pipe. The system must contain
functional interlocking controls to automatically shut off the pesticide injection pump when the water pump motor stops,
or in cases where there is no water pump, when the water pressure decreases to the point where pesticide distribution is
adversely affected.
For additional instructions on safety precautions, refer to statements (2), (3), (4), (6), and (7) in the section on SAFETY
DEVICES.
Spray Drift Precautions
Avoiding spray drift at the application site is the responsibility of the applicator. The interaction of many equipment-
and-weather-related factors determine the potential for spray drift. The applicator and the grower are responsible for
considering all these factors when making decisions. The following drift management requirements must be followed
to avoid off-target drift movement from aerial applications to agricultural field crops. These requirements do not
apply to forestry applications, public health uses or to applications using dry formulations.
1. The distance of the outer most nozzles on the boom must not exceed ¾ the length of the wingspan or rotor.
2. Nozzles must always point backward parallel with the air stream and never be pointed downwards more than
45 degrees.
Where states have more stringent regulations, they should be observed. The applicator should be familiar with and
take into account the information covered in the Aerial Drift Reduction Advisory Information.
Aerial Drift Reduction Advisory Information
[This section is advisory in nature and does not supersede mandatory label requirements.]
Information on Droplet Size : The most effective way to reduce drift potential is to apply large droplets. The best
drift management strategy is to apply the largest droplets that provide sufficient coverage and control. Applying larger
droplets reduces drift potential, but will not prevent drift if applications are made improperly, or under unfavorable
environmental conditions (see Wind, Temperature and Humidity, and Temperature Inversions).
Volume - Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with higher rated flows
produce larger droplets.
Pressure - Do not exceed the nozzle manufacturer’s recommended pressures. For many nozzle types lower pressure
produces larger droplets. When higher flow rates are needed, use higher flow rate nozzles instead of increasing
pressure.
Number of Nozzles - Use the minimum number of nozzles that provide uniform coverage.
Nozzle Orientation - Orienting nozzles so that the spray is released parallel to the airstream produces larger droplets
than other orientations and is the recommended practice. Significant deflection from horizontal will reduce droplet
size and increase drift potential.

Page 6 of 27
Nozzle Type - Use nozzle type that is designed for the intended application. With most nozzle types, narrower spray
angles produce larger droplets. Consider using low-drift nozzles. Solid stream nozzles oriented straight back produce
the largest droplets and the lowest drift.
Boom Length: For some use patterns, reducing the effective boom length to less than ¾ of the wingspan or rotor
length may further reduce drift without reducing swath width.
Application Height: Applications should not be made at a height greater than 10 feet above the top of the largest
plants unless a greater height is required for aircraft safe ty. Making applications at the lowest height that is safe
reduces exposure of droplets to evaporation and wind.
Swath Adjustment : When applications are made with a crosswind, the swath will be displaced downwind.
Therefore, on the up and downwind edges of the field, the applicator must compensate for this displacement by
adjusting the path of the aircraft upwind. Swath adjustme nt distance should increase, with increasing drift potential
(higher wind, smaller drops, etc.).
Wind: Drift potential is lowest between wind speeds of 2-10 mph. However, many factors, including droplet size
and equipment type determine drift potential at any given speed. Application should be avoided below 2 mph due to
variable wind direction and high inversion potential. NOTE: Local terrain can influence wind patterns. Every
applicator should be familiar with local wind patterns and how they affect spray drift.
Temperature and Humidity: When making applications in low relative humidity, set up equipment to produce
larger droplets to compensate for evaporation. Droplet evaporation is most severe when conditions are both hot and
dry.
Temperature Inversions: Applications should not occur during a temperature inversion because drift potential is
high. Temperature inversions restrict vertical air mixing, which causes small suspended droplets to remain in a
concentrated cloud. This cloud can move in unpredictabl e directions due to the light variable winds common during
inversions. Temperature inversions are characterized by increasing temperatures with altitude and are common on
nights with limited cloud cover and light to no wind. They begin to form as the sun sets and often continue into the
morning. Their presence can be indicated by ground fog; however, if fog is not present, inversions can also be
identified by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and
moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves
upward and rapidly dissipates indicates good vertical air mixing.
Sensitive Areas: The pesticide should only be applied when the potential for drift to adjacent sensitive areas (e.g.
residential areas, bodies of water, known habitat for threat ened or endangered species, non-target crops ) is minimal
(e.g. when wind is blowing away from the sensitive areas).
General Information
TERRANIL 6L is an excellent fungicide when used according to label directions for control of a broad spectrum of plant
diseases. TERRANIL 6L can be used effectively in dilute or concentrate sprays. Thorough, uniform coverage is essential
for disease control.
Slowly invert container several times to assure uniform mixture. The required amount of TERRANIL 6L should be
added slowly into the spray tank during filling. With concentrate sprays, pre-mix the required amount of TERRANIL
6L in a clean container and add to the spray tank as it is being filled. Keep agitator running when filling spray tank and
during spray operations.
Dosage rates on this label indicate pints of TERRANIL 6L per acre unless otherwise stated. Under conditions favoring
disease development, the high rate specified and shortest application interval should be used. Applications should be
made in sufficient water to obtain adequate coverage of foliage. Gallonage to be used will vary with crop and amount of
plant growth. Spray volume usually will range from 20 to 150 gallons (approximately 80 to 600 liters) per acre for dilute
sprays and 5 to 10 gallons (approximately 20 to 40 liters) per acre for concentrate ground sprays and aircraft applications.
Both ground and aircraft methods of application are recommended unless specific directions for ground application only
are given for a crop. Application through sprinkler irrigation systems is not recommended unless specific directions are
given for a crop. See application and calibration instructions above.

Page 7 of 27
This product may be tank mixed with other products at specified rates as long as tank mixing is not prohibited by the
label(s) of the tank mix partner products, or as otherwise noted on this label, and the tank mix partner products are
labeled for the timing and method of application for the use site to be treated. Do not combine TERRANIL 6L in the
spray tank with pesticides, surfactants or fertilizers, unless prior use has shown the combination physically compatible,
effective and noninjurious to your conditions of use. If compatibility with another product is not known, perform a (jar)
test to determine compatibility. Follow all applicable directions, restrictions and precautions that appear on the
respective tank mix product labels.
General Precautions and Restrictions
This product must not be applied within 150 feet (for aerial and air-blast applications) or 25 feet (for ground
applications) of marine/estuarine water bodies unless there is an untreated buffer area of that width between the area
to be treated and the water body.
Do not combine TERRANIL 6L with Dipel® 4L, Latron® AG-98, or Latron B-1956 as phytotoxicity may result from
the combination when applied to some crops on this label.
Do not use on home lawns and turf sites associated with apartment buildings, daycare centers, playgrounds, playfields,
recreational park athletic fields, athletic fields located on or next to schools (i.e., elementary , middle and high schools),
campgrounds, churches, and theme parks.
Do not use on greenhouse grown food crops.
APPLICATION RATES
Dosage rates on this label indicate pints of TERRANIL 6L per acre, unless otherwise stated. Under conditions favoring
disease development, the high rate specified and the shortest application interval should be used.
For each listed crop, the maximum total amount chlorothalonil active ingredient (lbs. a.i./A) which may be applied
per acre of that crop (or crop group) during each growin g season is stated in the Specific Use Restrictions section
associated with each crop (or crop group). For each crop us e situation listed below, the listed maximum individual
and seasonal application rates must not be exceeded an d the listed minimum retreatment intervals must not be
decreased.
CROP DISEASES
(Pathogen)
PTS.
PRODUCT/ A
(lbs. a.i./A)
APPLICATION DIRECTIONS
Asparagus Rust
(Puccinia asparagi)
Purple Spot
(Pleospora herbarum)
Cercospora blight
(C. asparagi)
2 to 4
(1.5 to 3.0)
Use water volumes of 25-50 gallons per acre.
Begin applications following final harvest of
spears. Repeat applications at 14- 28 day
intervals (the minimum retreatment interval is
14 days), depending on disease pressure. Use
the higher rate and shorter interval if disease
severity begins to increase during the season or
weather conditions are conducive for severe
epidemics.
Apply by ground.
Specific Use Restrictions: Do not apply more than 12 pints TERRANIL 6L (9.0 lbs. a.i.) per acre during each growing season.
Do not apply within 190 days (120 days in CA and AZ) of the harvest of spears in the following season.

Page 8 of 27
CROP DISEASES
(Pathogen)
PTS.
PRODUCT/ A
(lbs. a.i./A)
APPLICATION DIRECTIONS
Bean (Snap) Rust (Uromyces
appendiculatus)
ǪWR
(1.0 to 2.25)
Use in sufficient water to obtain adequate
coverage. Begin applications during early
bloom stage or when disease first threatens and
repeat (the minimum retreatment interval is 7
days).
Botrytis blight
(gray mold)
(B. cinerea)
3
(2.25)
Specific Use Restrictions: Do not apply more than 12 pints TERRANIL 6L (9.0 lbs. a.i.) per acre during each growing season. Do
not apply within 7 days of harvest.
Dried shelled pea and bean
(except soybeans)
bean, adzuki
bean, broad
bean, dry
bean, lablab
bean, navy
bean, kidney
bean, lima
bean, moth
bean, mung
bean, pink
bean, pinto
bean, tepary
bean, urd
bean, yardlong
catjang
chickpea (garbanzo)
cowpea
lupin, grain
lupin
bean, rice
bean, runner
bean, jackbean
pea, blackeyed
pea, southern
Rust (Uromyces
appendiculatus)
Anthracnose
(Colletotrichum
lindemuthianum)
Downy mildew
(Phytophthora
nicotianae)
Cercospora leaf blotch
(C. cruenta)
Ascochyta blight
(A. phaseolorum)
ǪWR
(1.0 to 1.5)
Use in sufficient water to obtain adequate
coverage. Begin applications at first onset of
disease, which may occur as early as 2 to 4
weeks before flowering. Repeat applications at
7 to 10 day intervals (the minimum retreatment
interval is 7 days). For use only on beans to be
harvested dry with pods removed.
Apply by ground, air or chemigation.
Specific Use Restrictions: Do not apply more than 8 pints TERRANIL 6L (6 lbs. a.i.) per acre during each growing season. Do not
apply within 14 days before harvest.

Page 9 of 27
CROP DISEASES
(Pathogen)
PTS.
PRODUCT/ A
(lbs. a.i./A)
APPLICATION DIRECTIONS
Blueberries Suppression:
Anthracnose (ripe rot)
(C. gloeosporoides)
Mummy Berry
(M. vacciniicorymbosi)
3 to 4
(2.25 to 3.0)
TERRANIL 6L should be integrated into an
overall disease management strategy which
includes alternation with a fungicide with a
different mode of action. Diseases may only be
suppressed and russetting may occur under
heavy disease pressure or unfavorable
environmental conditions.
Apply in sufficient water to obtain adequate
coverage, normally 20-100 gallons per acre.
Begin applications at budbreak (green tip) and
repeat at 10-day intervals through early bloom
(the minimum retreatment interval is 10 days).
Under heavy disease pressure, use the higher
rate.
Apply by ground or air.
Septoria leaf spot
(Septoria albopunctata)
Rust
(Pucciniastrum
vaccinii)
3 to 4
(2.25 to 3.0)
Foliar Use After Harvest(after all berries are
harvested): To maintain healthy leaves for the
following season, apply in sufficient water to
obtain adequate coverage (normally 20-100
gallons per acre). Repeat at 10-14 day intervals
(the minimum retreatment interval is 10 days).
Apply by ground or air.
Specific Use Restrictions: Do not apply more than 12 pints TERRANIL 6L (9.0 lbs. a.i.) per acre during each growing season. Do
not apply after full bloom (except for foliar use after harvest) or within 42 days of harvest.
Brassica, head and Stem:
Broccoli
Broccoli, Chinese
Brussels Sprouts
Cabbage
Cabbage, Chinese (tight-
headed varieties and Napa)
Cabbage, Chinese Mustard
Cauliflower
Cavalo, broccoli
Kohlrabi
Alternaria leaf spot,
(Alternaria spp.)
Downy mildew
(Peronospora
parasitica)
1½
(1.125)
Use in sufficient water to obtain adequate
coverage. Begin applications after transplants
are set in field, or shortly after emergence of
field-seeded crop, or when conditions favor
disease development. Repeat at 7 to 10 day
intervals (the minimum retreatment interval is
7 days).
Apply by ground, air or chemigation.
Ring spot (California
only)
2
(1.5)
For field-seeded Brussels sprouts, begin
applications at time of early sprout
development or when conditions favor disease
development. Repeat at 7 to 10 day intervals
(the minimum retreatment interval is 7 days) to
maintain control.
Specific Use Restrictions: Do not apply more than 11.7 pints TERRANIL 6L (8.8 lbs. a.i.) per acre during each growing season.
Do not apply within 7 days of harvest.

Page 10 of 27
CROP DISEASES
(Pathogen)
PTS.
PRODUCT/ A
(lbs. a.i./A)
APPLICATION DIRECTIONS
Carrot Cercospora leaf spot
(C. carotae)
Alternaria leaf blight
(A. dauci)
1½ to 2
(1.125 to 1.5)
Use in sufficient water to obtain adequate
coverage. Start applications when disease
threatens and repeat at 7 to 10 day intervals (the
minimum retreatment interval is 7 days) to
maintain control.
Apply by ground, air or chemigation.
Specific Use Restrictions: Do not apply more than 20 pints TERRANIL 6L (15 lbs. a.i.) per acre during each growing season.
TERRANIL 6L may be applied the day of harvest.
Celery Early blight
(Cercospora apii)
Late blight (Septoria
apicola)
Basal stalk rot
(Rhizoctonia solani)
2 to 3
(1.5 to 2.25)
Use in sufficient water to obtain adequate
coverage. Start applications when transplants
are set in the field and repeat at a 7-day interval
as needed to maintain control (the minimum
retreatment interval is 7 days).
Apply by ground, air or chemigation.
Suppression
(7-day schedule):
Pink rot (Sclerotinia
sclerotiorum)
3
(2.25)
Early blight
(Cercospora apii)
Late blight (Septoria
apicola)
1½ to 2
(1.125 to 1.5)
per 100 gals.
For celery seedbeds, apply in a spray volume
of 125 gallons per acre twice weekly or as
needed to maintain control. Start applications
shortly after crop emergence. Use the higher
rate under severe disease conditions.
Specific Use Restrictions: Do not apply more than 24 pints TERRANIL 6L (18 lbs. a.i.) per acre during each growing season. Do
not apply within 7 days of harvest.
Corn (Sweet)
Corn (grown for seed)
Helminthosporium leaf
blights
Rust (Puccinia spp.)
¾ to 2
(0.6 to 1.5)
Use in sufficient water to obtain adequate
coverage. Begin applications when conditions
favor disease development and repeat at a 7
day interval as required to maintain control
(the minimum retreatment interval is 7 days).
Under severe disease conditions, use 1½ to 2
pints TERRANIL 6L per acre.
Apply by ground, air or chemigation.
Specific Use Restrictions: Do not apply more than 12 pints TERRANIL 6L (9 lbs. a.i.) per acre during each growing season. Do
not apply within 14 days of harvest. Do not apply to sweet corn to be processed. Do not allow livestock to graze in treated fields. Do
not ensile treated corn or use as livestock forage.

Page 11 of 27
CROP DISEASES (Pathogen) PTS.
PRODUCT/ A
(lbs. a.i./A)
APPLICATION DIRECTIONS
Cranberry Fruit rots
Lophodermium
leaf/twig blight
(L. hypophyllum)
4 to 6½
(3.0 to 4.9)
Apply at early bloom and repeat at 10 to 14 day
intervals (the minimum retreatment interval is 10
days). Under severe disease conditions, use the 6½
pint/acre rate on a 10 day schedule.
Apply by ground, air or chemigation. When applying
by chemigation, use 300 gallons of water per acre
through solid set systems only.
Upright Dieback
(Phomopsis vaccinii)
4 to 6½
(3.0 to 4.9)
Apply in sufficient water to obtain coverage of uprights
and runners. Make the first application before bloom,
at the time shoots begin growth in the spring. Make
additional applications at 10-14 day intervals.
Apply by ground, air or chemigation. When applying
by chemigation, use 300 gallons of water per acre
through solid set systems only.
Specific Use Restrictions: Do not apply more than 20 pints TERRANIL 6L (15 lbs. a.i.) per acre during each growing season. Do not apply within
50 days of harvest. Do not apply to beds when flooded or allow release of irrigation water from beds for at least 3 days following application.
Cucurbits:
Cantaloupe
Chinese waxgourd (Chinese
preserving melon)
Cucumber
Gourds
Honeydew melon
Momordica spp. (balsam apple, bitter
melon)
Muskmelon
Pumpkin
Squash
Watermelon
Zucchini
Anthracnose
(Colletotrichumspp.)
Downy mildew
(Pseudoperonospora
cubensis)
Target spot
(Corynespora cassiicola)
1½ to 2
(1.125 to 1.5)
Use in sufficient water to obtain adequate coverage.
Begin applications when plants are in first true leaf
stage or when conditions are favorable for disease
development. Repeat applications at 7 day intervals
(the minimum retreatment interval is 7 days).
Note: Spraying mature watermelons may result in
sunburn of the upper surface of the fruit. Do not apply
TERRANIL 6L to watermelons when any of the
following conditions are present:
1. Intense heat and sunlight
2. Drought conditions
3. Poor vine canopy
4. Other crop and environmental conditions
which may be conducive to increased natural
sunburn.
Do not combine TERRANIL 6L with anything except
water for application to watermelons unless your prior
use has shown the combination to be non-injurious to
watermelons under your conditions of use.
Apply by ground, air or chemigation.
Including cultivars and/or hybrids of
these. Cercospora leaf spot
(C. citrullina)
Gummy stem
blight/vine decline
(Didymella bryoniae)
Alternaria leaf blight
(A. cucumerina)
Alternaria leaf spot
(A. alternata)
Scab (Cladosporium
cucumerinum)
Powdery mildew
(Spaerotheca only)
2 to 3
(1.5 to 2.25)
Specific Use Restrictions: Do not apply more than 21 pints TERRANIL 6L (15.75 lbs. a.i.) per acre during each growing season. TERRANIL 6L
may be applied the day of harvest.

Page 12 of 27
CROP DISEASES
(Pathogen)
PTS.
PRODUCT/ A
(lbs. a.i./A)
APPLICATION DIRECTIONS
Fruiting Vegetables(except
tomatoes):
Eggplant
Groundcherry
Okra
Pepino
Pepper (includes bell pepper, chili
pepper, cooking pepper, pimento,
sweet pepper)
Tomatillo
Anthracnose
(Colletotrichumspp.)
Botrytis Leaf mold
(Botrytis cinera)
Cercospora leaf spot
(Cercospora spp)
Powdery mildew
(Leveillula taurica)
1½
(1.125) Use in sufficient water to obtain adequate coverage.
Begin application when disease first threatens, and
repeat at 7 to 10 day intervals as disease pressure
warrants.
Apply by ground, air or chemigation
Specific Use Restrictions: Do not apply more than 12 pints of TERRANIL 6L (9.0 lbs. a.i.) per acre during each growing season. Do not
apply within 3 days of harvest.
Ginseng Alternaria blight
(Alternaria panax)
Grey mold
(Botrytis cinerea)
2
(1.5)
Use in sufficient water to obtain adequate coverage.
Begin applications when disease first threatens, and
repeat at 7 to 10 day intervals as disease pressure
warrants.
Specific Use Restrictions: Do not apply more than 16 pints of TERRANIL 6L (12.0 lbs. a.i.) per acre during each growing season. Do not
apply within 14 days of harvest.
Grasses Grown for Seed Stem rust
Leaf rust
Stripe rust
Septoria leaf spot
Glume blotch
Bipolaris and
Drechslera leaf spots
1 to 1½
(0.75 to 1.125)
Use in sufficient water to obtain adequate coverage.
Begin applications during stem elongation when
conditions favor disease development. Re-apply at
flag (top) leaf emergence and repeat applications at
14 day intervals (the minimum retreatment interval
is 14 days).
Apply by ground, air or chemigation.
Selenophoma (eyespot) 1 to 2
(0.75 to 1.5)
Specific Use Restrictions: Do not apply more than 6 pints TERRANIL 6L (4.5 lbs. a.i.) per acre during each growing season. Do not apply
within 14 days of harvest. Do not allow livestock to graze in treated areas or feed hay produced before harvest. Feeding of treated plant parts
after harvest of seed is allowed.
Horseradish Ramularia stem and
leaf spot
(Ramularia
armoraciae)
3
(2.25)
Use is sufficient water to obtain adequate coverage.
Begin applications when disease first threatens, and
repeat at 7 to 10 day intervals as disease pressure
warrants.
Specific Use Restrictions: Do not apply more than 24 pints of TERRANIL 6L (18 lbs. a.i.) per acre during each growing season. Do not
apply within 14 days of harvest.
Lupine, Lentil Anthracnose
(Colletotrichum
gloeosporioides)
Ascochyta
(Ascochyta pisi)
1 to 1.5
(0.75 to 1.125)
Use in sufficient water to obtain adequate coverage.
Begin applications when disease first threatens, and
repeat at 7 to 10 day intervals as disease pressure
warrants.
Specific Use Restrictions: Do not apply more than 8 pints of TERRANIL 6L (6 lbs. a.i.) per acre during each growing season. Do not apply
within 14 days of harvest.

Page 13 of 27
CROP DISEASES
(Pathogen)
PTS.
PRODUCT/ A (lbs.
a.i./A)
APPLICATION DIRECTIONS
Mango Anthracnose
(Colletotrichumspp.)
2 to 3½
(1.5 to 2.6)
Use a water volume of 20 to 300 gallons per acre.
Begin applications at early bloom and repeat on a 7-
14 day interval until early fruit development. Begin
the season with the 2 pint rate on a 14-day interval
(the minimum retreatment interval is 7 days). If
disease pressure is severe, use the higher rate and
shorter interval.
Apply by ground or air.
Specific Use Restrictions: Do not apply more than 32 pints TERRANIL 6L (24 lbs. a.i.) per acre during each growing season. Do not apply
within 21 days of harvest.
Mint
(Indiana, Michigan and Wisconsin
only)
Rust (Puccinia
menthae)
Septoria leaf spot
(S. menthae)
Ǫ
(1.0)
Use in sufficient water to obtain adequate coverage,
normally 20 to 150 gallons per acre for dilute sprays
and 5 to 10 gallons per acre for concentrate ground
and aircraft applications. Begin applications when
emerging plants are 4- 8 inches high. Repeat
applications at 7 to 10 day intervals to maintain
control (the minimum retreatment interval is 7
days).
Specific Use Restrictions: Do not apply more than 4 pints TERRANIL 6L (3 lbs. a.i. ) per acre during each growing season. Do not apply
within 80 days of harvest. Do not feed fresh or extracted mint hay from treated fields to livestock.
Mushrooms Verticillium brown spot
and dry bubble
(Verticillium fungicola)
Rate per 1,000 sq. ft.
of bed surface
2.75 to 5.5 fl. oz.
Apply as a drench to the mushroom bed surface in
at least 12.5 gallons of water per 1000 sq. ft. of
mushroom bed. Make two applications as follows:
x First application- apply 5.5 fl. oz. of this
product within two days of top-dressing the
spawn-colonized mushroom compost with a
casing layer.
x Second application- apply 2.75 fl. oz. of this
product at pinning.
Specific Use Restrictions: Make no more than two applications per cropping cycle. Do not apply more than 8.25 fl. oz. of this product per
cropping cycle. Do not apply within 5 days of first harvest.

Page 14 of 27
CROP DISEASES
(Pathogen)
PTS.
PRODUCT/ A
(lbs. a.i./A)
APPLICATION DIRECTIONS
Onion (dry bulb) and
Garlic
Botrytis leaf
blight (Botrytis spp.)
Purple blotch
(Alternaria porri)
Suppression:
Botrytis neck rot
Downy mildew
(Peronospora
destructor)
1 to 3
(0.75 to 2.25)
Apply in sufficient water to obtain adequate
thorough coverage of tops. TERRANIL 6L is
recommended for use with disease monitoring
systems which adjust fungicide rates and
frequency of application according to disease
hazard. Apply as follows:
Low
Disease
Hazard &
Prior to
Infection
Low
Disease
Hazard
& Some
Disease
Present

High
Disease
Hazard
Rate/Acre 1 pt. ǪSWV3 pts.
Frequency 10 days 7-10
days
7 days
For suppression of neck rot ( Botrytis spp.)
during storage, a minimum of three weekly
DSSOLFDWLRQVSULRUWROLIWLQJXVLQJǪWRSLQWV
of TERRANIL 6L per acre, is recommended
The minimum retreatment interval is 7 days.
Apply by ground, air or chemigation.
Specific Use Restrictions:Do not apply more than 20 pints TERRANIL 6L (15 lbs. a.i.) per acre during each growing season. Do
not apply within 7 days of harvest.
Onion (green bunching)
Leek, Shallots,
Onion and Garlic
(grown for seed)
Botrytis leaf blight
(Botrytis spp.)
Purple blotch
(Alternaria porri)
Suppression:
Downy mildew
(Peronospora
destructor)
1½ to 3
(1.125 to 2.25)
Use in sufficient water to obtain thorough
coverage of tops. Begin applications prior to
favorable infection periods, and repeat at 7 to
10 day intervals for as long as conditions favor
disease (the minimum retreatment interval is 7
days). Use the high rate and a 7 day schedule
of applications when heavy dew or rain persist.
Apply by ground, air or chemigation.
Specific Use Restrictions: Do not apply more than 9 pints TERRANIL 6L (6.75 lbs. a.i.) per acre during each growing season. Do
not apply within 7 days of harvest on garlic. Do not apply within 14 days of harvest on green bunching onions, leeks or shallots.
Papaya Alternaria fruit spot
(A. alternata)
Anthracnose
(Colletotrichumspp.)
Stem end rot
(A. alternata,
Colletotrichumspp.)
1½ to 3
(1.125 to 2.25)
Apply with ground equipment only, in
sufficient water to obtain adequate coverage of
fruit and leaves. Begin treatment when
conditions favor development of disease and
continue treatments at 14 day intervals until
weather conditions no longer favor disease
development (the minimum retreatment
interval is 14 days.).
Specific Use Restrictions: Do not apply more than 9 pints TERRANIL 6L (6.75 lbs. a.i.) per acre during each growing season.
TERRANIL 6L may be applied the day of harvest.

Page 15 of 27
CROP DISEASES
(Pathogen)
PTS.
PRODUCT/ A
(lbs. a.i./A)
APPLICATION DIRECTIONS
Parsnip Alternaria leaf spot
(Alternaria spp.)
Downy mildew
(Plasmopara crustosa)
Anthracnose
(Colletotrichumspp.)
Botrytis blight (gray
mold) (B. cinerea)
Bottom rot
(Rhizoctonia)
1½ to 2
(1.125 to 1.5)
Apply in sufficient water to obtain adequate
coverage. Make the first application at the first
sign of disease or when conditions are favorable
for infection. Continue applications on a 7 to 10
day schedule (the minimum retreatment interval
is 7 days).
Specific Use Restrictions: Do not apply more than 8 pints TERRANIL 6L (6 lbs. a.i.) per acre during each growing season. Do not
apply within 10 days of harvest.
Passion Fruit
(Hawaii only)
Alternaria fruit and leaf
spot (Alternaria spp.)
Anthracnose
(Colletotrichumspp.)
Cercospora fruit spot
2
(1.5)
Apply with ground equipment in sufficient water
to obtain adequate coverage of fruit and leaves.
Begin applications during late bloom and repeat
at 14 day intervals until weather conditions no
longer favor disease development (the minimum
retreatment interval is 14 days).
Specific Use Restrictions: Do not apply more than 10 pints TERRANIL 6L (7.5 lbs. a.i.) per acre during each growing season. Do not
apply within 7 days of harvest.
Peanut Early leaf spot
(Cercospora
arachidicola)
Late leaf spot
(Cercosporidium
personatum)
Pepper spot
(Leptosphaerulina
crassiasca)
1 to 1½
(0.75 to 1.125)
Apply in sufficient water for coverage when leaf
wetness first occurs or 30 to 40 days after
planting. Repeat at 14 day intervals (the
minimum retreatment interval is 14 days). When
conditions favor late leaf spot or when rust or web
blotch occur, apply 1½ pints TERRANIL 6L per
acre at 14 day intervals for the remainder of the
season.
Apply by ground, air, or chemigation. If applying
by chemigation, use 1½ pints TERRANIL 6L per
acre. It is recommended to alternate chemigation
applications with ground or aerial applications.
Rust (Puccinia
arachidis)
Web blotch (Phoma
arachidicola)
1½
(1.125)
Specific Use Restrictions: Do not apply more than 12 pints TERRANIL 6L (9 lbs. a.i.) per acre during each growing season. Do not
apply within 14 days of harvest. Do not allow livestock to graze in treated areas. Do not feed hay or threshings from treated fields to
livestock.
Persimmon
(Florida and Hawaii only)
Cercospora leaf spot
(Cercospora fuliginosa)
1.25
(0.94)
Use in sufficient water to obtain adequate
coverage. Begin applications when disease first
threatens, and repeat at 14 day intervals as disease
pressure warrants. Aerial applications require the
use of a minimum of 10 gallons per acre.
Specific Use Restrictions: Do not apply more than 6.25 pints of TERRANIL 6L (4.7 lbs. a.i.) per acre during each growing season.
Do not apply within 14 days of harvest.

Page 16 of 27
CROP DISEASES
(Pathogen)
PTS.
PRODUCT/ A
(lbs. a.i./A)
APPLICATION DIRECTIONS
Potato Late blight
(Phytophthora
infestans)
Early blight
(Alternaria solani)
Botrytis vine rot
(B. cinerea)
Black dot
(Colletotrichum
coccodes)
¾
(0.6)
-then-
1 to 1½
(0.75 to 1.125)
Begin applications at the low rate when vines are
first exposed and leaf wetness occurs. Repeat
applications at 5 to 10 day intervals (the minimum
retreatment interval is 5 days).
Begin applying the higher label rates at 5 to 10
day intervals when any one of the following
events occurs:
- Vines close within the row;
- Late blight forecasting measures 18 disease
severity values (DSV);
- The crop reaches 300 P-days.
Increase water spray volume as canopy density
increases. Use the highest rate and shortest
interval when plants are rapidly growing and
disease conditions are severe.
Apply by ground, air, or chemigation. Do not
exceed a 10 day interval between applications
when using chemigation.
Specific Use Restrictions: Do not apply more than 15 pints of TERRANIL 6L (11.25 lbs. a.i.) per acre during each growing season.
Do not apply within 7 days of harvest.
Rhubarb Ramularia leaf spot
(Ramularia rhei)
Ascochyta blight
(Ascochyta rhei)
3
(2.25)
Use sufficient water to obtain adequate coverage.
Begin applications when disease first threatens,
and repeat at 7 to 10 day intervals as disease
pressure warrants.
Specific Use Restrictions:Do not apply more than 18 pints of TERRANIL 6L (13.5 lbs. a.i.) per acre during each growing season. Do
not apply within 30 days of harvest.

Page 17 of 27
CROP DISEASES
(Pathogen)
PTS.
PRODUCT/ A
(lbs. a.i./A)
APPLICATION DIRECTIONS
Soybean Anthracnose
(Colletotrichum
truncatum)
Diaporthe pod and
stem rot
(D. phaseolorum)
Frogeye leaf spot
(Cercospora sojina)
Purple seed stain
(C. kikuchii)
Cercospora leaf blight
(C. kikuchii),
Septoria brown spot
(S. glycines)
Suppression:
Rust (Phakopsora
pachyrhizi)
Apply in sufficient water to obtain complete
coverage, using at least five gallons water per acre
for aerial application. Use the three application
program in areas having a history of moderate to
severe disease intensity. The minimum
retreatment interval is 14 days.
Apply by ground, air, or chemigation.
1½ to 2¼
(1.125 to 1.7)
Two application program – For determinate
varieties, make the first application at R3 stage
(early pod set) and the second application at R5
(seed formation). For indeterminate varieties,
make the first application when largest pods are
1-1¼ inches in length. Make the second
application 14 days later.
1 to 2
(0.75 to 1.5)
Three application program: For determinate
varieties, make the first application at the
beginning of flowering (R1), the second at early
pod set (R3), and the third at beginning of seed
formation (R5). For indeterminate varieties, make
the first application one week after first flowering
and continue applications at 14 day intervals.
Stem canker
(Diaporthe
phaseolorum)
1
(0.75)
Apply in 10 to 20 gallons of water per acre, as a
band treatment directing spray to provide
coverage of entire plant. Make the first
application at time of emergence of the second
trifoliate leaves (V2). If conditions favor stem
canker disease, make a second and a third
application. Make all applications at 14 day
intervals.
Specific Use Restrictions: Do not apply more than 6 pints TERRANIL 6L (4.5 lbs. a.i.) per acre during each growing season. Do not
apply within 6 weeks of harvest. Do not feed hay or threshings from treated fields to livestock.

Page 18 of 27
CROP DISEASES
(Pathogen)
PTS.
PRODUCT/ A
(lbs. a.i./A)
APPLICATION DIRECTIONS
Tomato FOLIAGE:
Early blight
(Alternaria solani)
Late blight
(Phytophthora
infestans)
Gray leaf spot
(Stemphyllium
botryosum)
Gray leaf mold
(Fluvia fluva;
Cladosporium)
Septoria leaf spot
(S. lycopersici)
Target spot
(Corynespora
cassiicola)
ǪWR
(1.0 to 1.5)
Apply in sufficient water to obtain adequate
coverage. Begin applications when dew or rain
occur and disease threatens. Apply on a 7-10 day
interval for foliage diseases. For fruit diseases,
begin at fruit set and apply on a 7-14 day interval.
Use the highest rate and shortest interval specified
when disease condition s are severe. The
minimum retreatment interval is 7 days.
Apply by ground, air, or chemigation.
FRUIT:
Anthracnose
(Colletotrichumspp.)
Alternaria fruit rot
(black mold)
(A. alternata)
Botrytis gray mold
(B. cinerea)
Late blight fruit rot
(P. infestans)
Rhizoctonia fruit rot
(R. solani)
2 to 2¾
(1.5 to 2.1)
Specific Use Restrictions: Do not apply more than 20 pints TERRANIL 6L (15 lbs. a.i.) per acre during each growing season.
TERRANIL 6L may be applied the day of harvest.
Yam Anthracnose
(Colletotrichum
gloeosporioides)
1 to 1.25
(0.75 to 1.125)
Use in sufficient water to obtain adequate
coverage. Begin applications when disease first
threatens, and repeat at 10 to 14 day intervals as
disease pressure warrants.
Specific Use Restrictions: Do not apply more than 15 pints of TERRANIL 6L (11.25 lbs. a.i.) per acre during each growing season.
Do not apply within 7 days of harvest.
Tree and Orchard Crops
Apply TERRANIL 6L in sufficient water and with proper calibration to obtain uniform coverage of tree canopy. For fruit and
nut bearing crops, the maximum volume is 300 gallons per acre unless indicated otherwise in the specific use directions. For
conifers, the maximum volume is 100 gallons per acre.
Application with ground equipment is preferable to aerial application because ground applications generally give better
coverage of the tree canopy. If application with ground equipment is not feasible, TERRANIL 6L may be applied with aircraft

Page 19 of 27
using at least 20 gallons of spray per acre. The minimum volume for application by aircraft to conifer stands and Christmas
trees is 10 gallons per acre.
When concentrate sprays are used or when treating non-bearing or immature trees, the lower rate of TERRANIL 6L listed
may be used. Do not allow livestock to graze in treated areas.
PTS. PRODUCT PER
(lbs. a.i. per)


CROP
DISEASES
(Pathogen)

ACRE
100 GAL.*
APPLICATION DIRECTIONS
Almonds Anthracnose
(Colletotrichum acutatum)
Blossom blight/brown rot
(Monilinia spp.)
Shot hole
(Wilsonomyces
carpophilus)
Scab
(Venturia carpophila)
4
(3.0)
1.33
(1.0)
Use water volumes of 20-300 gallons per acre. For
blossom blight, begin application at popcorn (pink
bud) and follow with an application at full bloom.
If weather is still conducive for disease
development, another application may be made at
petal fall.
For control of shot hole, make an application in the
autumn at leaf fall. In the spring, make the first
application at budbreak, followed by an application
at shuck split to control nut infections and to control
scab.
Apply by ground or air.
Specific Use Restrictions: Do not apply more than 25 pints TERRANIL 6L (18.75 lbs. a.i.) per acre during each growing season
(leaf fall through shuck split). Do not apply within 150 days of harvest.
Filberts
(Hazel-
nuts)
Eastern filbert blight
(Anisogramma anomala)
4
(3.0)
1.33
(1.0)
Use a water volume of 20 to 300 gallons per acre.
Begin applications at the onset of disease or when
weather conditions favor disease development.
Make applications on a 14-28 day schedule, using
the shorter interval under heavy disease pressure
(the minimum retreatment interval is 14 days.)
Specific Use Restrictions: Do not apply more than 12 pints TERRANIL 6L (9 lbs. a.i.) per acre during each growing season. Do not
apply within 120 days of harvest. Do not apply through irrigation. Do not apply with oils, other pesticides, surfactants or fer tilizers.
Do not apply within one week of an oil-based pesticide application.

Page 20 of 27
PTS. PRODUCT PER
(lbs. a.i. per)
CROP DISEASES
(Pathogen)
ACRE 100 GAL.* APPLICATION DIRECTIONS
Peach
Nectarine
Apricot
Cherry
Plum
Prune
Leaf curl
(Taphrina deformans)
Shot hole (Wilsonomyces
carpophilus)
ǩWRǩ
(2.3 to 3.1)
WRǪ
(0.75 to 1.0)
For best control of both diseases apply at leaf fall
in late autumn, using sufficient water and proper
sprayer calibration to obtain uniform coverage.
When conditions favor high disease levels, use the
high rate of application and apply once or twice
more in mid to late winter before bud swell. If the
leaf fall application is not practical, application of
TERRANIL 6L for control of leaf curl may be made
at any time prior to bud swell the following spring.
Where shot hole occurs, also apply at budbreak to
protect newly emerging leaves and at shuck split to
prevent fruit infections.
Apply by ground or air.
Lacy (russet) scab
(plum/prune)
Brown rot blossom blight
(Monilinia spp.)
ǩWRǩ
(2.3 to 3.1)
WRǪ
(0.75 to 1.0)
Make one application at popcorn (pink, red, or early
white bud) and a second application at full bloom.
If weather conditions favor disease development,
make an additional application at petal fall.
Cherry leaf spot
(Blumeriella jaapii)
Scab (Cladosporium
carpophilum)
Black knot (cherry, plum)
(Apiosporina morbosa)
ǩWRǩ
(2.3 to 3.1)
WRǪ
(0.75 to 1.0)
In addition to the bloom applications listed above,
make one application at shuck-split. Do not apply
TERRANIL 6L after shuck- split and before
harvest. If additional disease control is needed
before harvest, use another registered fungicide.
For control of cherry leaf spot after harvest, make
one application to foliage within 7 days after fruit
is removed. In orchards with a history of high leaf
spot incidence, make a second application 10-14
days later.
Apply by ground or air.
Specific Use Restrictions: Do not apply more than 20½ pints TERRANIL 6L (15.4 lbs. a.i.) per acre during each growing season.
TERRANIL 6L may be applied the day of harvest. The minimum retreatment interval is 10 days.
Pistachio Botryosphaeria blight
(B. dothidea)
Suppression:
Alternaria late blight
(A. alternata)
6
(4.5)
3
(2.25)
Use a water volume of 20 to 200 gallons per acre.
Make the first application at the beginning of the
blossom period followed by an application at full
bloom. Make additional applications as required on
a 28- day schedule. (The minimum retreatment
interval is 28 days). For Septoria and Botrytis, use
the higher rate if disease pressure is severe.
NOTE: Use of this product may result in speckling
or reddening of the fruit hull (epicarp). This effect
is superficial and has not resulted in any change in
nut quality.
Apply by ground or air.
Septoria leaf spot
(S. pistacina)
Botrytis blight
(B. cinerea)
4 to 6
(3.0 to 4.5)
2 to 3
(1.50 to 2.25)
Specific Use Restrictions: Do not apply more than 30 pints TERRANIL 6L (22.5 lbs. a.i.) per acre during each growing season. Do
not apply within 14 days of harvest.

Page 21 of 27
PTS. PRODUCT PER
(lbs. a.i. per)
CROP DISEASES
(Pathogen)
ACRE 100 GAL.* APPLICATION DIRECTIONS
Conifers
(pines,
spruces)
Swiss needlecast
(Phaeocryptopus
gaeumannii)
2¾ to 5½
(2.1 to 4.125)
2¾ to 5½
(2.1 to 4.125)
Single application technique: In Christmas tree
plantations or conifer stands, make one application
in the spring when new shoot growth is ½ to 2
inches in length.
Scleroderris canker (pines)
(Gremmeniella abietina)
Swiss needlecast
(P. gaeumannii)
1½ to 2¾
(1.125 to 2.1)
1½ to 2¾
(1.125 to 2.1)
Make the first application in spring when new shoot
growth is ½ to 2 inches in length. Make additional
applications at 3 to 4 week intervals until conditions
no longer favor disease development. For use in
nursery beds, apply the highest rate specified on a
3 week schedule.Sirococcus tip blight
(S. conigenus)
2 to 3½
(1.5 to 2.6)
2 to 3½
(1.5 to 2.6)
Rhizosphaera needlecast
(spruces)
(Rhizosphaera spp.)
Scirrhia brown spot (pines)
(Mycosphaerella
dearnessii)
5½
(4.125)
5½
(4.125)
Cyclaneusma and
Lophodermium needlecast
(pines)
2¾ to 5½
(2.1 to 4.125)
2¾ to 5½
(2.1 to 4.125)
Apply in early spring prior to budbreak. Repeat
applications at approximately 6 to 8 week intervals,
until spore release ceases in late fall. Apply
monthly during periods of frequent rainfall, and
where Lophodermium infections occur during
dormancy (Pacific NW). During drought periods,
applications may be suspended, then resumed upon
next occurrence of needle wetness.
Rhabdocline needlecast
(Douglas fir)
1½ to 2¾
(1.125 to 2.1)
1½ to 2¾
(1.125 to 2.1)
Apply at budbreak and repeat at 3 to 4 week
intervals until needles are fully elongated and
conditions no longer favor disease development. In
plantations of mixed provenance, or when irregular
budbreak occurs, apply weekly until all trees have
broken bud, then every 3 to 4 weeks as specified
above. In nursery beds, use the high rate on a 3
week schedule.
Botrytis seedling blight
Phoma twig blight
1½ to 2¾
(1.125 to 2.1)
1½ to 2¾
(1.125 to 2.1)
Begin applications in nursery beds when seedlings
are 4 inches tall and when cool, moist conditions
favor disease development. Make additional
applications at 7 to 14 day intervals as long as
favorable disease conditions persist.
Autoecious needle rust
(Weir’s cushion) (spruce)
5½
(4.125)
5½
(4.125)
Begin applications when 10% of buds have broken
and twice thereafter at 7-10 day intervals.
Specific Use Restrictions: Do not apply more than 22 pints TERRANIL 6L (16.5 lbs. a.i.) per acre during each growing season. The
minimum retreatment interval for established trees is 21 days. The minimum retreatment interval in nursery beds is 7 days. Do not use
on forest.
*Volumetric rates to be used only with full dilute spray volume specified on this label for tree and orchard crops.

Page 22 of 27
DIRECTIONS FOR USE ON TURF AND ORNAMENTALS
Turf
Group A. Golf Course Fairways, Sod Farms, Lawns (around institutional, commercial and industrial buildings), and
Ornamental Turfgrass:
NOTE: Do not use on home lawns and turf sites associated with apartment buildings, daycare centers, playgrounds,
playfields, recreational park athletic fields, athletic fields located on or next to schools (ie., elementary , middle and high
schools), campgrounds, churches, and theme parks.
NOTE: Sod farm turf treated with chlorothalonil prior to harvest must be mechanically cut, rolled and harvested.
Do not use for sodfarms at application rates greater than 13 pounds of active ingredient, per acre, per year.
Do not apply more than 34.7 pints/acre (12.7 fl. ozs./1000 sq. ft.) of TERRANIL 6L per growing season (26 lbs.
a.i./acre/growing season. For sodfarms, do not apply more than 17.4 pints/acre (6.4 fl. ozs./1000 sq. ft) of TERRANIL 6L
per growing season (13 lbs. ai./acre/growing season. The minimum growing retreatment interval for single application
rates up to 9.75 pints/acre (3.6 fl. ozs./1000 sq. ft.) of TERRANIL 6L (7.3 lbs. a.i./acre) is 7 days. Do not apply more than
one application of a rate greater than 9.75 pints/acre (3.6 fl. oz./1000 sq. ft.) of TERRANIL 6L (7.3 lb. a.i./acre) per growing
season. The maximum single application rate is 15.1 pints/acre (5.5 fl. ozs./1000 sq. ft.) of TERRANIL 6L (11.3 lbs.
a.i./acre).
Apply TERRANIL 6L in 30 to 40 gallons of water per acre. Begin applications when conditions favor disease development
and repeat applications as long as these conditions persist. Under severe disease conditions use the highest rate and shortest
interval corresponding with the application schedule selected from the table below.
DO NOT mow or water after treatment until spray deposited on turfgrass is thoroughly dry; TERRANIL 6L should always
be used in conjunction with good turf management practices.
Group B. Golf Course Tees and Greens.
Golf Course Tees: Do not apply more than 69.3 pints/acre (25.4 fl. ozs./1000 sq. ft.) of TERRANIL 6L (52 lbs. a.i./acre)
per growing season. The minimum retreatment interval for single application rates up to 9.75 pints/acre (3.6 fl. ozs./1000
sq. ft.) of TERRANIL 6L (7.3 lbs. a.i./acre) is 7 days. Th e minimum retreatment interval after an application of a rate
greater than 9.75 pints/acre (3.6 fl. ozs./1000 sq. ft.) of TERRANIL 6L (7.3 lbs. a.i./acre) is 14 days. Do not apply more
than two applications of a rate greater than 9.75 pints/acre (3.6 fl. ozs./1000 sq. ft.) of TERRANIL 6L (7.3 lbs. a.i./acre)
per growing season. The maximum single application rate is 15.1 pints/acre (5.5 fl. ozs./1000 sq. ft.) of TERRANIL 6L
(11.3 lbs. a.i./acre).
Golf Course Greens: Do not apply more than 97.3 pints/acre (35.7 fl. ozs./1000 sq. ft.) of TERRANIL 6L (73 lbs.
a.i./acre) per growing season. The minimum retreatment interval for single application rates up to 9.75 pints/acre (3.6 fl.
ozs./1000 sq. ft.) of TERRANIL 6L (7.3 lbs. a.i./acre) is 7 days and the minimum retreatment interval after an application
of a rate greater than 9.75 pints/acre (3.6 fl. ozs.1000 sq. ft.) of TERRANIL 6L (7.3 lbs. a.i./acre) is 14 days. Do not
apply more than two applications of a rate greater than 9.75 pints/acre (3.6 fl. ozs./1000 sq. ft.) of TERRANIL 6L (7.3 lbs.
a.i./acre) per growing season. The maximum single application rate is 15.1 pints/acre (5.5 fl. ozs./1000 sq. ft.) of
TERRANIL 6L (11.3 lbs. a.i./acre).
Apply TERRANIL 6L in an adequate amount of water to provide complete coverage. This amount may vary from 90 to
450 gallons per acre. See table below for suggested rates and timing. Under severe disease conditions use the highest
rate and shortest interval corresponding with the application schedule selected from the table below.
DO NOT mow or water after treatment until spray deposited on turfgrass is thoroughly dry: TERRANIL 6L should
always be used in conjunction with good turf management practices.

Page 23 of 27
Diseases Controlled* Application
Interval
(days)
Pre-Disease Ratesa Post-Disease Ratesa
fl. oz.
product/1000
sq. ft.
pints
product/acre
lbs. a.i./acre fl. oz.
product/1000
sq. ft.
pints
product/acre
lbs. a.i./acre
Dollar Spot 7 to 10
7 to 21
14
1.0b to 2.0
2.0 to 3.6
-
2.8 b to 5.0
5.5 to 9.75
2.1 b to 4.1
4.1 to 7.3
-
-
-
4.0 to 5.5
-
-
11 to 15.1
-
-
8.25 to 11.3
Leafspot
Melting-out
Brown Blight
7 to 10
7 to 21
14
2.0
2.0 to 3.6
-
5.5
5.5 to 9.75
-
4.1
4.1 to 7.3
-
-
-
4.0 to 5.5
-
-
11 to 15.1
-
-
8.25 to 11.3
Brown patch 7 to 14
14
2.0 to 3.6 5.5 to 9.75
-
4.1 to 7.3 -
4.0 to 5.5
-
11 to 15.1
-
8.25 to 11.3
Gray Leafspot 7 to 10
14
2.0 to 3.6 5.5 to 9.75
-
4.1 to 7.3 -
4.0 to 5.5
-
11 to 15.1
-
8.25 to 11.3
Red Thread 7 to 10
14
2.0 to 3.6
3.6 to 5.5
5.5 to 9.75
9.9 to 15.1
4.1 to 7.3
7.4 to 11.3
-
5.5
-
15.1
-
11.3
Anthracnose 7 to 14
14
3.0 to 3.6
3.6 to 5.5
8.3 to 9.75
9.9 to 15.1
6.2 to 7.3
7.4 to 11.3
-
-
-
-
-
-
Copper Spot 14 4.0 to 5.5 11 to 15.1 8.25 to 11.3 5.5 15.1 11.3
Stem Rust (Bluegrass) 14 4.0 to 5.5 11 to 15.1 8.25 to 11.3 5.5 15.1 11.3
DICHONDRA:
Leafspot (CA Only)
14 4.0 to 5.5 11 to 15.1 8.25 to 11.3 5.5 15.1 11.3
Gray Snow Moldc 30 5.5 15.1 11.3 - - -
Fusarium (Gertlachia)
Patchc
21 to 28 5.5 15.1 11.3 - - -
Algaec 7 to 14
14
2.0 to 3.6 5.5 to 9.75 4.1 to 7.3 2.0 to 3.6
4.0 to 5.5
5.5 to 9.75
11 to 15.1
4.1 to 7.3
8.25 to 11.3
a Group A Turf: Limit of one application per season at rates greater than 7.3 lbs. a.i./acre (9.75 pints/acre or 3.6 fl.
oz./1000 sq. ft. of TERRANIL 6L ).
Group B Turf: Limit of two applications per season at rates greater than 7.3 lbs. a.i./acre (9.75 pints/acre or 3.6 fl.
oz./1000 sq. ft. of TERRANIL 6L ).
b Low rate is not effective on intensively mowed turfgrasses such as golf course tees and greens.
c See specific use directions below.
* Diseases listed are caused by fungi, some of which are named as follows:
x Dollar spot: Sclerontinia homeocarpa; Lanzia or Moellerodiscus spp.
x Leafspots, Melting-out, Brown blight: Drechslera spp. (including D. poae, D. siccans), Bipolaris
sorokiniana, Curvularia spp.
x Brown patch: Rhizoctonia solani, R. zeae, R. cerealis
x Gray leafspot: Pyricularia grisea, P. oryzae
x Red Thread: Laetisaria fuciformis
x Anthracnose: Colletotrichum graminicola
x Copper spot: Gloeocercospora sorghi
x Stem rust: Puccinia graminis
x Dichondra leaf spot: Alternaria spp.
x Gray Snow Mold: Typhula spp.
x Fusarium (Gerlachia) Patch
x Algae
Gray snow mold caused by Typhula spp. – Group A and B – Turf: Apply in sufficient water to obtain adequate
coverage (2 to 10 gallons per 1000 sq. ft.). Apply one application 15.1 pints/acre (5.5 fl. ozs./1000 sq. ft.) of
TERRANIL 6L (11.3 lbs. a.i./acre). Application must be made before snow cover in autumn. Group B Turf: If
snow cover is intermittent or lacking during the winter, a second application of TERRANIL 6L at 15.1 pints/acre
(5.5. fl. ozs./1000 sq. ft.) may be applied one month after the first application.
Fusarium (Gerlachia) Patch: Group A and B Turf: In areas where pink snow mold (Gerlachia or Fusarium patch) is
likely to occur, apply TERRANIL 6L at 15.1 pints/acre (5.5 fl. ozs./1000 sq. ft.)(11.3 lbs. a.i./acre) in combination
with products containing iprodione at 88 ozs. a.i./acre (2 ozs. a.i./1000 sq. ft.) of turf area. Read and observe all
label directions for products containing these active ingredients. For control of Fusarium patch only in areas where
snow cover is intermittent or lacking during the winter, apply 15.1 pints/acre of TERRANIL 6L (5.5 fl. ozs./1000 sq.

Page 24 of 27
ft.)(11.3 lbs. a.i./acre). Make application in late autumn. Group B Turf: Apply a second application of 15.1
pints/acre (5.5 fl. ozs./1000 sq. ft.) of TERRANIL 6L 21 to 28 days after the first application unless conditions
favorable for Fusarium patch no longer prevail.
Algae: Group A and B Turf: For prevention of algae on turfgrasses, apply TERRANIL 6L at the rate of 5.5 to 9.75
pints/acre (2.0 to 3.6 fl. ozs./1000 sq. ft.) (4.1 to 7.3 lbs. a.i./acre) on a 7 to 14 day schedule. Under severe algae
conditions use the 9.75 pints/acre (3.6 fl. oz./1000 sq. ft.) rate and apply on a 7 day schedule.
When algae is well established, every attempt should be made to dry out the afflicted area. Once dry, spiking or
verticutting should be done to enhance turfgrass recovery in conjunction with a TERRANIL 6L application at the
rate of 11 to 15.1 pints/acre (4.0 to 5.5 fl. ozs./1000 sq. ft.). Group B Turf: A second application at the 15.1
pints/acre (5.5 fl. ozs./1000 sq. ft.) rate may be made 14 days after the first application.
Group A and B Turf: Following applications of the 15.1 pints/acre (5.5 fl. ozs./1000 sq. ft.) rate, several
applications of TERRANIL 6L at a rate of 5.5 to 9.75 pints/acre (2.0 to 3.6 fl. ozs./1000 sq. ft.)(4.1 to 7.3 lbs.
a.i./acre) on a 7 to 14 day interval may be necessary for turfgrass recovery. Only a preventative spray program with
TERRANIL 6L will prevent a recurrence of the algae when environmental conditions are favorable.
Ornamental Plants
Apply TERRANIL 6L DWDUDWHRIǪSLQWVOEDLSHUJDOORQVRIZater unless other directions are given in
the tables below. DO NOT apply more than 48.5 pints of TERRANIL 6L (36.4 lbs. a.i./acre) per growing season to
field grown ornamentals. Apply in a spray to run-off, when conditions are favorable for disease development.
Repeat applications at 7 to 14 day intervals until conditions are no longer favorable. During periods when
conditions favor severe disease incidence, generally cloudy or wet weather, apply TERRANIL 6L at 7 day intervals.
The minimum retreatment interval is 7 days. TERRANIL 6L should be applied to plants when both foliage and
flowers are dry, or nearly dry.
DO NOT combine TERRANIL 6L in the spray tank with pesticides, surfactants or fertilizers, unless your prior use
has shown the combination to be physically compatible, effective and noninjurious under your conditions of use.
TERRANIL 6L may be used in greenhouses for ornamental plants. DO NOT use mistblowers or high pressure spray
equipment when making applications of TERRANIL 6L in greenhouses.
Use of TERRANIL 6L is recommended for control of fungal diseases referred to by numbers in parentheses
following each ornamental. Ornamentals listed on this label have been tested and found to tolerate applications of
TERRANIL 6L at the recommended rates. The user should test for possible phytotoxic response, using
recommended rates on ornamental plants on a small area prior to commercial use. Applications made during bloom
may damage flowers and/or fruits.
Fruits and other structures which may be borne on treated plants MUST NOT BE EATEN.
Ornamentals recommended for treatment with TERRANIL 6L
Broadleaf Shrubs and Trees:
Andromeda (Pieris) (4) Holly (1)
Ash (Fraxinus) (1) Lilac (5)
Aspen (1) Magnolia (1)
Azalea (1,2,4) Maple (1)
Buckeye, Horsechestnut (1) Mountain Laurel (1)
Cherry-Laurel (1) Oak (red group only) (1,7)
Crabapple (1,6,8) Oregon-Grape (Mahonia) (6)
Dogwood (1) Photinia (1)
Eucalyptus (3) Poplar (1)
Euonymus (1) Privet (Ligustrum) (1)
Firethorn (Pyracantha) (1) Rhododendron (1,2,4)
Flowering Almond (1,2) Sand Cherry (1,2)
Flowering Cherry (1,2) Sequoia (1)
Flowering Peach (1,2) Spiraea (1)
Flowering Plum (1,2) Sycamore, Planetree (1)
Flowering Quince (1,2) Viburnum (5)
Hawthorn (1,6) Walnut (Juglans) (1)

Page 25 of 27
Flowering Plantsa and Bulbs
Arabian Violet (2) Iris, bulbous (1)
Begonia (1) Lily (1)
Camellia (2) Lily, Asiatic (1)
Carnation (1,2) Marigold (1)
Chrysanthemum (1,2) Narcissus (1)
Crocus (1) Pansy (1)
Daffodil (1) Petunia (1,4)
Daisy (1) Phlox (1)
Geranium (1,6) Poinsettia
b (1)
Gladiolus (1,2) Rose c (1)
Hollyhock (6) Statice (1)
Hydrangea (foliage only) (1,6) Tulip (1)
Iris (1,2) Zinnia (1,5)
a Avoid applications during bloom period on plants where flower injury is unacceptable.
b Discontinue applications prior to bract formation; phytotoxicity is possible on the bracts.
c Use 1 pint TERRANIL 6L (.75 lbs. a.i.) per 100 gallons of water.
Foliage Plants
Aglaonema (1)
Areca palm (1)
Artemesia (1)
Boston Fern (Nephrolepis) (1)
Dumbcane (Diffenbachia) (1)
Dracaena (1)
Fatsia (Aralia) (1)
Ficus (1)
Florida ruffle fern (1)
Leatherleaf fern (1)
Lipstick plant (1)
Ming aralia (1)
Oyster plant (Rhoeo) (1)
Pachysandrad (1)
Parlor Palm (Chamaedorea) (1)
Peperomia (1)
Philodendron (1,4)
Prayer plant (Maranta) (1)
Syngonium (1)
Zebra plant (Aphelandra) (1)
d Use 2¾ pints TERRANIL 6L (2.1 lbs. a.i.) per 100 gallons of water.
Diseases controlled with TERRANIL 6L:
1. Leafspots/Foliar Blights:
Achtinopelte leafspot Fabraea (Entomosporium) leafspot
Alternaria leafspot/leaf blight Fusarium leafspot
Anthracnose leaf blotch, spot Gloeosporium black leafspot
Anthracnose (Discula) blight Ink spot (Dreschlera)
Ascochyta blight Marssonina leafspot
Bipolaris (Helminthosporium) leafspot Monilinia blossom blight, twig blight
Black spot on roses Mycosphaerella ray blight
Botrytis leafspot, leaf blight Myrothecium leafspot, brown rot
Cephalosporium leafspot Nematostoma leaf blight
Cercospora leafspot Phyllosticta leafspot
Cercosporidium leafspot Ramularia leafspot
Corynespora leafspot Rhizoctonia web blight
Coryneum blight (shothole) Septoria leafspot
Curvularia leafspot Sphaeropsis leafspot
Cylindrosporium leafspot Stagonospora leaf scorch
Dactylaria leafspot Tan leaf spot (Curvularia)
Didymellina leafspot Volutella leaf blight
Drechslera leafspot
2. Flower spots/blights:
Botrytis flower spot, flower blight
Curvularia flower spot
Monilinia blossom blight
Ovulinia flower blight
Rhizopus blossom blight
Sclerotinia flower blight

Page 26 of 27
3. Cylindrocladium stem canker
4. Phytophthora leaf blight, dieback
5. Powdery mildews
Erysiphe cichoracearum
Microsphaera spp.
6. Rusts
Gymnosporangium spp.
Pucciniastrum hydrangeae
Puccinia spp.
7. Taphrina blister
8. Scab (Venturia inaequalis)
The following ornamental plant species which have been tested with TERRANIL 6L at recommended rates did not exhibit phytotoxicity:
Botanical Name Common Name
Aechmea fasciata Aechmea
Araucaria heterophylla Norfolk Island Pine
Bougainvillea spp. Bougainvillea
Caladium spp. Caladium
Calathea makoyana Peacock Plant
Calistephus chinensis Aster
Carissa grandiflora Natal Plum
Clerodendron thomsonae Bleeding Heart
Codiaeum spp. Croton
Cordyline terminalis Ti Plant
Crassula argentea Jade Plant
Dionaea muscipula Venus Fly Trap
Dizygotheca elegantissima False Aralia
Epipremnum aureum Golden Pothos, Scindapsus
Episcia cupreata Flame Violet
Fittonia spp. Silver-nerve plant
Gerbera jamesonii Gerbera Daisy
Gynura sarmentosa Purple Passion Vine
Gypsophilia paniculata Baby’s Breath
Hoya spp. Wax Plant
Ilex cornuta Chinese Holly
Ilex crenata Japanese Holly
Impatiens spp. Impatiens
Pilea cadierei Aluminum Plant
Sansevieria trifasciata “Hahnii” Birdsnest Sansevieria
Tolmeia menziesii Piggy-back plant
Yucca elephantipes Spineless Yucca
Zygocactus truncatus Christmas Cactus
NOTE: DO NOT apply TERRANIL 6L to either green or variegated Pittosporum or to Schefflera, as multiple applications have been
demonstrated to cause phytotoxic responses.
TERRANIL 6L® is a registered trademark of Winfield Solutions, LLC.
WARRANTY DISCLAIMER
The directions for use of this product must be followed carefully. TO THE EXTENT CONSISTENT WITH
APPLICABLE LAW, (1) THE GOODS DELIVERED TO YOU ARE FURNISHED “AS IS” BY
MANUFACTURER OR SELLER AND (2) MANUFACTURER AND SELLER MAKE NO WARRANTIES,
GUARANTEES, OR REPRESENTATIONS OF ANY KIND TO BUYER OR USER, EITHER EXPRESS OR
IMPLIED, OR BY USAGE OF TRADE, STATUTORY OR OTHERWISE, WITH REGARD TO THE PRODUCT
SOLD, INCLUDING, BUT NOT LIMITED TO MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, USE, OR ELIGIBILITY OF THE PRODUCT FOR ANY PARTICULAR TRADE USAGE.
UNINTENDED CONSEQUENCES, INCLUDING BUT NOT LIMITED TO INEFFECTIVENESS, MAY
RESULT BECAUSE OF SUCH FACTORS AS THE PRESENCE OR ABSENCE OF OTHER MATERIALS
USED IN COMBINATION WITH THE GOODS, OR THE MANNER OF USE OR APPLICATION,
INCLUDING WEATHER, ALL OF WHICH ARE BEYOND THE CONTROL OF MANUFACTURER OR
SELLER AND ASSUMED BY BUYER OR USER. THIS WRITING CONTAINS ALL OF THE

Page 27 of 27
REPRESENTATIONS AND AGREEMENTS BETWEEN BUYER, MANUFACTURER AND SELLER, AND
NO PERSON OR AGENT OF MANUFACTURER OR SELLER HAS ANY AUTHORITY TO MAKE ANY
REPRESENTATION OR WARRANTY OR AGREEMENT RELATING IN ANY WAY TO THESE GOODS.
LIMITATION OF LIABILITY
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, IN NO EVENT SHALL MANUFACTURER OR
SELLER BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, OR FOR
DAMAGES IN THE NATURE OF PENALTIES RELATING TO THE GOODS SOLD, INCLUDING USE,
APPLICATION, HANDLING, AND DISPOSAL. MANUFACTURER OR SELLER SHALL NOT BE LIABLE
TO BUYER OR USER BY WAY OF INDEMNIFICATION TO BUYER OR TO CUSTOMERS OF BUYER, IF
ANY, OR FOR ANY DAMAGES OR SUMS OF MONEY, CLAIMS OR DEMANDS WHATSOEVER,
RESULTING FROM OR BY REASON OF, OR RISING OUT OF THE MISUSE, OR FAILURE TO FOLLOW
LABEL WARNINGS OR INSTRUCTIONS FOR USE, OF THE GOODS SOLD BY MANUFACTURER OR
SELLER TO BUYER. ALL SUCH RISKS SHALL BE ASSUMED BY THE BUYER, USER, OR ITS
CUSTOMERS. BUYER’S OR USER’S EXCLUSIVE REMEDY, AND MANUFACTURER’S OR SELLER’S
TOTAL LIABILITY SHALL BE FOR DAMAGES NOT EXCEEDING THE COST OF THE PRODUCT.
If you do not agree with or do not accept any of directions for use, the warranty disclaimers, or limitations on
liability, do not use the product, and return it unopened to the Seller, and the purchase price will be refunded.