crop-chem-docs/corpus/epa_ppls/19713-705.md

# DREXEL ME-TRY-BUZIN 75DF

- EPA Reg No: **19713-705**
- Registrant: DREXEL CHEMICAL COMPANY
- Signal word: Caution
- Active ingredients: Metribuzin (75%)
- Label accepted: 2026-06-11
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/019713-00705-20260611.pdf

---
June 11, 2026
Luz Chan
lchan@drexchem.com
DREXEL CHEMICAL COMPANY
Subject: Non-PRIA (Pesticide Registration Improvement Act) Labeling Amendment - Label
amendment to reinstate missing rates and weeds controlled
Product Name: DREXEL ME-TRY-BUZIN 75DF
Admin Number: 19713-705
EPA Receipt Date: 06/10/2026
Action Case Number: 00701169
Dear Luz Chan:
The amended labeling referred to above, submitted in connection with registration under the Federal
Insecticide, Fungicide, and Rodenticide Act, as amended, is acceptable.
This approval does not affect any terms or conditions that were previously imposed on this registration. You
continue to be subject to existing terms or conditions on your registration and any deadlines connected with
them.
A stamped copy of your labeling is enclosed for your records. This labeling supersedes all previously
accepted labeling. You must submit one (1) copy of the final printed labeling before you release this product
for shipment with the new labeling. In accordance with 40 CFR § 152.130(c), you may distribute or sell this
product under the previously approved labeling for 18 months from the date of this letter. After 18 months, you
may only distribute or sell this product if it bears this new revised labeling or subsequently approved labeling.
“To distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR § 152.3.
Should you wish to add/retain a reference to your company’s website on your label, then please be aware that
the website becomes labeling under FIFRA and is subject to review by EPA. If the website is false or
misleading, the product will be considered to be misbranded and sale or distribution of the product is unlawful
under FIFRA section 12(a)(1)(E). 40 CFR § 156.10(a)(5) lists examples of statements the EPA may consider
false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims
made on the website may not substantially differ from those claims approved through the registration process.
Therefore, should the EPA find or if it is brought to our attention that a website contains statements or claims
substantially differing from statements or claims made in connection with obtaining a FIFRA section 3
registration, the website will be referred to the EPA’s Office of Enforcement and Compliance Assurance.
Your release for shipment of this product constitutes acceptance of these terms. If these terms are not
complied with, this registration will be subject to cancellation in accordance with FIFRA section 6.

If you have questions, please contact Emily Schmid via email at schmid.emily@epa.gov.
Sincerely,
Emily Schmid, Product Manager 25
HB, RD
Office of Pesticide Programs

Page 1 of 71 
 
 
 
 
 
 
 
 
For control of certain grasses and broadleaf weeds in Alfalfa and Sainfoin, Asparagus, Carrots, Cereals (Spring & 
Winter Barley and Winter Wheat), Corn (Field and Sweet), Established Bermudagrass turf, Garbanzo beans, Grasses 
grown for seed*, Lentils and Peas, Potatoes, Soybeans, Sugarcane and Tomatoes. 
 
ACTIVE INGREDIENT: 
 Metribuzin……..…………………………………………...…………………..…………….……...…… 75.0% 
OTHER INGREDIENTS:................................................................................................................ 25.0% 
 TOTAL: ..................................................................................................................................100.0% 
 
KEEP OUT OF REACH OF CHILDREN 
CAUTION 
[See FIRST AID Below] 
[See Side (Back) Panel for FIRST AID]; [See Page ___ for FIRST AID] 
[See Container Labeling for (FIRST AID and) Complete Directions for Use] 
[See (Attached) Booklet (Container Labeling) for Complete Directions for Use] 
EPA Reg. No. 19713-705 
EPA Est. No. 19713-XX-X Net Content_____ Lbs. (_____Kg) 
FIRST AID 
IF SWALLOWED: 
• Call a poison control center or doctor immediately for treatment advice. 
• Have a person sip a glass of water if able to swallow. 
• Do not induce vomiting unless told to by a poison control center or doctor. 
• Do not give anything by mouth to an unconscious person.
 
IF ON SKIN OR CLOTHING: 
• Take off contaminated clothing. 
• Rinse skin immediately with plenty of water for 15 to 20 minutes. 
• Call a poison control center or doctor for treatment advice. 
IF IN EYES: 
• Hold eye open and rinse slowly and gently with water for 15 to 20 minutes. 
• Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. 
• Call a poison control center or doctor for treatment advice. 
Have the product container or label with you calling a poison control center or doctor, or going for treatment. You may 
also call CHEMTREC at 1-800-424-9300 for emergency medical treatment information. 
NOTE TO PHYSICIAN: 
Metribuzin does not cause any definit e symptoms that would be diagnostic. Poisoning is accompanied by breathing 
difficulties and sedation. Treat patient symptomatically. 
 
*Bentgrass and established grasses grown for seed in Montana, Washington and Wyoming and in certain counties in Oregon. 
 
705SP-0626*Pending 
 
Me-Try-BuzinTM 75DF 
Dry Flowable Herbicide 
METRIBUZIN GROUP 5 HERBICIDE 
6/11/2026
19713-705

Page 2 of 71 
 
 
PRECAUTIONARY STATEMENTS 
Hazards to Humans and Domestic Animals 
CAUTION: Harmful if swallowed or absorbed through skin. Causes moderate eye irritation. Avoid contact with skin, 
eyes or clothing. 
PERSONAL PROTECTIVE EQUIPMENT (PPE) 
Applicators and other handlers must wear: Long-sleeved shirt and long pants, shoes plus socks and chemical-
resistant gloves made of any waterproof material. 
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables, use detergent and 
hot water. Keep and wash PPE separately from other laundry. 
ENGINEERING CONTROLS 
When handlers use closed systems, enclos ed cabs, or aircraft in a manner that meets the requirements listed in the 
Worker Protection Standard (WPS) for agricultural pesticid es (40 CFR 170.240(d)(4-6), the handler PPE requirements 
may be reduced or modified as specified in the WPS. 
 
USER SAFETY RECOMMENDATIONS 
Users should: 1) Wash hands thoroughly with soap and water after handling and before eating, drinking, chewing 
gum, using tobacco or using the toilet. 2) Remove clothing/PPE immediately if pesticide gets inside. Then wash 
thoroughly and put on clean clothing. 3) Remove PPE immediately after handling this product. Wash the outside of 
gloves before removing. As soon as possible, wash thoroughly and change into clean clothing. 
 
ENVIRONMENTAL HAZARDS 
Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high 
water mark. Do not apply when weather conditions favor drift from areas treated. Do not contaminate water when 
disposing of equipment washwaters. 
 
GROUNDWATER ADVISORY 
Metribuzin is a chemical which can travel (seep or leach) through soil and can contaminate groundwater which may be used 
as drinking water. Metribuzin has been found in groundwater as a result of agricultural use. Users are advised not to apply 
Metribuzin where the water table (ground water) is close to the surface and where the soils are very permeable, i.e., well 
drained soils such as loamy sands. Your local agricultural authority can provide further information on the type of soil in your 
area and the location of groundwater. 
 
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only 
protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult 
the agency responsible for pesticide regulation. 
 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 
170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, 
and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, 
decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions 
pertaining to the statements on this label about personal protective equipment (PPE) and restricted-entry 
interval. The requirements in this box only apply to uses of this product that are covered by the Worker 
Protection Standard. 
Do not enter or allow worker entry into treated areas du ring the restricted-entry interval (REI) of 12 hours. 
Exception: If the product is soil-injected or soil-incorporated, the Worker Protection Standard, under certain 
circumstances, allows workers to enter the treated area if there will be no contact with anything that has been 
treated. 
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that 
involves contact with anything that has been treated, such as plants, soil, or water, is: Coveralls and shoes plus 
socks. Applicators and other handlers must use chemical-resistant gloves, such as butyl rubber, nitrile rubber, 
neoprene rubber or natural rubber.

Page 3 of 71 
 
 
NON-AGRICULTURAL USE REQUIREMENTS 
The requirements in this box apply to uses of this produc t that are NOT within the scope of the Worker Protection 
Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce 
agricultural plants on farms, forests, nurseries, or greenhouses. 
Do not enter or allow others to enter treated area until sprays have dried. For dr y fertilizer application, do not enter or 
allow others to enter until dusts have settled. 
 
RESISTANCE MANAGEMENT 
 
For resistance management, this product is a Group 5 mode of action herbicide. Any weed population may contain or 
develop plants naturally resistant to this product and other Group 5 mode of action herbicides. The resistant biotypes may 
dominate the weed population if these herbicides are used repeatedly in the same field. Appropriate resistance management 
strategies should be followed. 
 
To delay herbicide resistance, take one or more of the following steps: 
• Rotate the use of this product or ot her Group 5 herbicides within a growing season sequence or among growing seasons 
with different herbicide groups that control the same weeds in a field. 
• Use tank mixtures with herbicides from a different group if such use is permitted; where information on resistance in target 
weed species is available, use the less resistance-prone partner at a rate that will control the target weed(s) equally as 
well as the more resistance-prone partner. Consult your local extension service or certified crop advisor if you are unsure 
as to which active ingredient is currently less prone to resistance. 
• Adopt an integrated weed-management program for herbicide us e that includes scouting and uses historical information 
related to herbicide use and crop rotation, and that considers tillage (or other mechanical control methods), cultural ( e.g., 
higher crop seeding rates; precision fertilizer application method and timing to favor the crop and not the weeds), biological 
(weed-competitive crops or varieties) and other management practices. 
• Scout after herbicide application to monitor weed populations for early signs of resistance development. Indicators of 
possible herbicide resistance include: (1) failure to control a weed species normally controlled by the herbicide at the dose 
applied, especially if control is achieved on adjacent weeds; (2) a spreading patch of non-controlled plants of a particular 
weed species; (3) surviving plants mixed with controlled individuals of the same species. If resistance is suspected, 
prevent weed seed production in the affected area by an alte rnative herbicide from a different group or by a mechanical 
method such as hoeing or tillage. Prevent movement of resist ant weed seeds to other fields by cleaning harvesting and 
tillage equipment when moving between fields, and planting clean seed. 
• If a weed pest population continues to progress after treatment with this product, discontinue use of this product, and 
switch to another management strategy or herbicide with a different mode of action, if available. 
• Contact your local extension specialis t or certified crop advisors for additional pesticide resistance-management and/or 
integrated weed-management recommendations for specific crops and weed biotypes. 
• For further information or to report suspected resistance, contact Drexel Chemical Company representatives at (901) 774-
4370. 
 
USE INFORMATION 
 
MIXING 
When using THIS PRODUCT, make sure the sprayer is completely clean, free of rust or corrosion which occurs from Winter 
storage. Examine strainers and screens to be sure the sprayer is clean from previously used pesticides. 
Any tank-mix containing this product should be kept agitated and sprayed immediately. Do not allow tank-mixes to stand for 
prolonged periods of time. 
The proper mixing procedures for THIS PRODUCT alone or in tank-mix combinations with other herbicides is: 
1. Fill the spray tank one-fourth to one-third full with clean water. 
2. Add specified rate of this product while recirculating and with agitator running. 
3. Follow the triple rinse procedure described under "STORAGE AND DISPOSAL" section to ensure that all products are 
removed from the container. 
4. Mix thoroughly and add clean water to fill spray tank to desired level. 
5. Add the other herbicide to tank last and agitate thoroughly. 
6. Continue agitation during application and until sprayer tank is empty. 
 
 
METRIBUZIN GROUP 5 HERBICIDE

Page 4 of 71 
 
 
TANK-MIX PARTNERS 
This product may be tank-mixed with other herbicides in acco rdance with the most restrict ive of label limitations and 
precautions. Do not exceed label dosage rates. This pr oduct may not be mixed with any product containing a label 
prohibition against such mixing. Refer to the crop specific information section of this label for additional information. 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the 
applicable restrictions and limitations and directions for use on all product labels involved in tank-mixing. Users must 
follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
SOIL TEXTURE 
As used on this label, coarse, medium or fine-textured soils are generally categorized as follows: 
 
Coarse Medium Fine 
Loamy sand 
Sandy loam 
Loam 
Silt loam 
Silt 
Sandy clay 
Sandy clay loam 
Silty clay 
Silty clay loam* 
Clay 
Clay loam 
* Silty clay loam soils are transitional soils and may be classified as medium textured soils in some regions of the U.S. 
 
USE RESTRICTIONS 
• For all uses: Low-pressure and high-volume hand-wand equipment is prohibited. 
• Do not allow sprays to drift on to adjacent desirable plants. 
• Do not use on other crops grown for food or forage. Apply THIS PRODUCT only as specified on this label. 
• Do not rotate any crop not listed on this label for 18 months following application of THIS PRODUCT. 
 
CROP ROTATION RESTRICTIONS 
Waiting Period After Application of THIS PRODUCT * I 
4 Months Alfalfa 
Asparagus 
Barley** 
Corn 
Forage Grasses 
Sainfoin 
Soybeans 
Sugarcane*** 
Tomatoes 
Wheat** 
8 Months Barley 
Lentils 
Peas 
Wheat 
- 
12 Months Rice**** Potatoes - 
18 Months Onions, Sugar beets and other root crops not listed on this label; All other crops not listed on 
this label. 
 *Cover crops for soil building or erosion control may be planted any time, but do not graze or harvest for food
or feed. Stand reductions may occur in some areas. 
 **Following Lentils, Peas or Soybeans 
 ***Do not rotate any crop not listed on this label after application of THIS PRODUCT to Sugarcane. 
****Do not rotate Rice after any application to a primar y crop greater than 1 lb. a.i./Ac. of THIS PRODUCT 
per season. 
 
CHEMIGATION 
THIS PRODUCT may be used for application through sprinkle r irrigation equipment to Asparagus, Potatoes, Soybeans 
and Tomatoes as directed on this label. Refer to the crop sect ions of this label for specified rates, weeds controlled or 
suppressed, use restrictions and special precautions. 
Apply THIS PRODUCT only through sprinkler (including center pivot, lateral move or solid set) irrigation systems. Do not 
apply THIS PRODUCT through any other type of irrigation system. 
Crop injury, lack of effectiveness or illegal pesticide residues in the crop can result from non-uniform distribution of treated 
water.

Page 5 of 71 
 
Calibration (Center Pivot and Self-Propelled Lateral Move Systems): Sprinkler irrigation systems must be accurately 
calibrated for application of THIS PRODUCT. Greater accuracy in calibration (and distribution) will be achieved by 
injecting a larger volume of a more dilute mixture of product and water per hour. Follow the steps below to calibrate center 
pivot and lateral move systems: 
1. Determine number of minutes required to make one complete revolution while applying 0.25 to 0.75 inch of water 
per acre. 
2. With the system at operating pressure, determine the exact number of minutes required to inject 1 gallon of water. 
3. Divide the time required for 1 revolution (step 1) by the time required to inject one gallon (Step 2). This gives total 
gallons of product-water mixture to be added to nurse tank. 
4. Add required amount of water to nurse tank and star t the agitation system. Then add sufficient amount of THIS 
PRODUCT at the specified rate (See “BROADCAST APPLICATIONS”) to the nurse tank. 
 
Example: If 20 hours (1200 minutes) were required for one revolution and if 2 minutes were required to inject one gallon, 
then a total of 600 gallons of product-water mixture are required (1200/2=600); to treat 135 acres at 0.75 pound per acre 
90.5 pounds of THIS PRODUCT are required. 
If you have questions about calibration, contact State Extension Service Specialists, equipment manufacturers or other 
experts. 
Do not connect an irrigation system (including greenhouse systems) used for pesticide application to a public water 
system unless the pesticide label-prescribed safety devices for public water systems are in place. 
A person knowledgeable of the chemigat ion system and responsible for its operatio n or under the supervision of the 
responsible person, shall shut the system down and make necessary adjustments should the need arise. 
The system must contain a functional check valve, vacuum relief valve, and low pressure drain appropriately located on 
the irrigation pipeline to prevent water source contamination from backflow. 
The pesticide injection pipeline must contain a functional, automatic, quick-closing check valve to prevent the flow of fluid 
back toward the injection pump. 
The pesticide injection pipeline must also contain a func tional, normally closed, solenoid- operated valve located on the 
intake side of the injection pump connected to the system interlock to prevent fluid from being withdrawn from the supply 
tank when the irrigation system is either automatically or manually shut down. 
The system must contain functional interlocking controls to automatically shut off the pesticide injection pump when the 
water pump motor stops. 
The irrigation line or water pump must include a functional pressure switch which will stop the water pump motor when 
the water pressure decreases to the point where pesticide distribution is adversely affected. 
Systems must use a metering pump, such as a positive displacement injection pump (e.g., diaphragm pump) effectively 
designed and constructed of materials that are compatible with pesticides and capable of being fitted with a system 
interlock. 
Do not apply when wind speed favors drift beyond the area intended for treatment. 
Maintain continuous agitation in the injection nurse tanks during the herbicide application, sufficient to keep herbicide in 
suspension. 
Apply specified dosage in one-fourth to three-fourths inch of water (0.25 to 0.5 inch of water on sandy soils) per acre as 
a continuous injection in center pivot and la teral move systems or in the last 15 to 30 minutes of set in permanent solid 
set sprinkler systems. Application of mo re than the quantity of irrigation water recommended on this label may result in 
decreased product performance by removing the chemical from the zone of effectiveness. Where sprinkler distribution 
patterns do not overlap sufficiently unacceptable weed contro l may result. Where sprinkler distribution patterns overlap 
excessively crop injury may result. Allow sufficient time for pesticide to be flushed through all lines and all nozzles before 
turning off irrigation water. To ensure that lines are flushed and free of remaining pesticide, an indicator dye may be 
injected into the lines to mark the end of the application period. 
Use a minimum of 1 part water to 1 part herbicide for injecti on. The use of a larger volume of water will ensure greater 
accuracy and more uniform distribution.

Page 6 of 71 
 
 
AERIAL DRIFT REDUCTION ADVISORY INFORMATION 
Avoiding spray drift at the application site is the responsibility of the applicator. The interaction of many equipment-and-
weather-related factors determine the pot ential for spray drift. The applicator and the grower are responsible for 
considering all these factors when making decisions. 
The following drift management requirements must be followed to avoid off-target drift movement from aerial applications 
to agricultural field crops. These requirements do not apply to forestry applications, public heal th uses or to applications 
using dry formulations. 
1. The distance of the outer most nozzles on the boom must not exceed three-fourths t he length of the wingspan or 
rotor. 
2. Nozzles must always point backwards parallel with the airstream and never be pointed downwards more than 45 
degrees. 
3. Where states have more stringent regulations, they should be observed. 
4. The applicator should be familiar with and take into account the information covered in the section “AERIAL DRIFT 
REDUCTION ADVISORY INFORMATION”. 
 
INFORMATION ON DROPLET SIZE: The most effective way to reduce drift potential is to apply large droplets. The best 
drift management strategy is to apply the largest droplets that provide sufficient coverage and control. Applying larger 
droplets reduces drift potential, but will not prevent drift if applications are made improperly or under unfavorable 
environmental conditions (see “Wind”, “Temperature and Humidity” and “Temperature Inversions”). 
 
CONTROLLING DROPLET SIZE: 
• Volume - Use high flow rate nozzles to apply the highes t practical spray volume. Nozzles with higher rated flows 
produce larger droplets. 
• Pressure - Do not exceed the nozzle manufacturer's recommended pressures. For many nozzle types lower pressure 
produces larger droplets. When higher flow rates are needed, use higher flow rate nozzles instead of increasing 
pressure. 
• Number of Nozzles - Use the minimum number of nozzles that provide uniform coverage. 
• Nozzle Orientation - Orienting nozzles so that the spray is released parallel to the airstream produces larger droplets 
than other orientations and is the recommended practice. Significant deflection from horizontal will reduce droplet size 
and increase drift potential. 
• Nozzle Type - Use a nozzle type that is designed for the intended application. With most nozzle types, narrower spray 
angles produce larger droplets. Consider using low-drift nozzles. Solid stream nozzles oriented straight back produce 
the largest droplets and the lowest drift. 
BOOM LENGTH: For some use patterns, reducing the effective boom length to less than 3/4 of the wingspan or rotor length 
may further reduce drift without reducing swath width. 
APPLICATION HEIGHT: Applications should not be made at a height greater than 10 feet above the top of the largest 
plants unless a greater height is required for aircraft safety. Ma king applications at the lowest height that is safe reduces 
exposure of droplets to evaporation and wind. 
SWATH ADJUSTMENT: When applications are made with a crosswind, the swath will be displaced downwind. Therefore, 
on the up and downwind edges of the field, the applicator must compensate for this displacement by adjusting the path of 
the aircraft upwind. Swath adjustment distance should increase, with increasing drift potential (higher wind, smaller drops, 
etc.). 
WIND: Drift potential is lowest between wind speeds of 2 to 10 mph. However, many factors, including droplet size and 
equipment type determine drift potential at any given speed. A pplication should be avoided below 2 mph due to variable 
wind direction and high inversion potential. Note: Local terrain can influence wind patterns. Every applicator should be 
familiar with local wind patterns and how they affect spray drift. 
TEMPERATURE AND HUMIDITY: When making applications in low relative humidity, set up equipment to produce larger 
droplets to compensate for evaporation. Droplet evaporation is most severe when conditions are both hot and dry. 
TEMPERATURE INVERSIONS: Applications should not occur during a tem perature inversion because drift potential is 
high. Temperature inversions restrict vertical air mixing, which causes small suspended droplets to remain in a 
concentrated cloud. This cloud can move in unpredictable directions due to the light variable winds common during 
inversions. Temperature inversions are characterized by increasing temperatures with altitude and are common on nights

Page 7 of 71 
 
with limited cloud cover and light to no wind. They begin to form as the sun sets and often continue into the morning. Their 
presence can be indicated by ground fog; however, if fog is not present, inversions can also be identified by the movement 
of smoke from a ground source or an aircraft smoke generator . Smoke that layers and moves laterally in a concentrated 
cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates 
good vertical air mixing. 
SENSITIVE AREAS: THIS PRODUCT should only be applied when the potential for drift to adjacent sensitive areas (e.g., 
residential areas, bodies of water, known habitat for threatened or endangered species, non-target crops) is minimal (e.g., 
when wind is blowing away from the sensitive areas). 
 
APPLICATION OF THIS PRODUCT WITH HERBICIDE SPRAY EQUIPMENT 
Use a standard low pressure (20 to 40 psi) herbicide boom sprayer equipped with suitable nozzles and screens no finer 
than 50 mesh in nozzle and in-line strainers. Agitate thoroughly before and during application with bypass agitation. 
GROUND APPLICATION: Apply the proper rate of THIS PRODUCT in a minimum of 10 to 40 gallons of spray mixture 
per acre broadcast. 
Banded Application: Use proportionally less per acre of THIS PRODUC T in a band versus a broadcast application. For 
band application use 0.25 to 1 gallon of spray mix per inch of band width regardless of row spacing. 
Examples: (1) To treat a 15-inch band on rows 30 inches apart, us e one-half of the broadcas t rate of THIS PRODUCT. 
(2) To treat a 14 inch band on rows 42 inches apart, use one-third of the broadcast rate of THIS PRODUCT. 
 
AERIAL APPLICATION: Where permitted, apply specified rate in a minimum of 2 to 10 gallons of spray mixture per acre. 
Do not apply aerially when wind speed is greater than 10 mph. 
 
FOR ALL APPLICATIONS OF THIS PRODUCT: Sprayer must be accurately calibrated before applying THIS PRODUCT. 
Check sprayer during application to be sure it is working properly and delivering a uniform spray pattern. As the volume of 
spray mixture decreases per acre, the importance of accurate calibration and unif orm application increases. Avoid other 
application, misapplication, and boom and spray swath overlapping that will increase spray dosage. (Crop injury may occur 
as a result.) Avoid spray skips and gaps which allow weeds to grow in untreated soil. 
Do not apply when weather conditions favor spray drift and/or when sensitive or cool season crops, such as Cole crops, 
Onions, Peas or Strawberries are present in adjacent fields or in areas where Wheat is growing in coarse textured soils. 
 
SPRAYER CLEANUP: Spray equipment must be thoroughly cleaned to remove remaining traces of herbicide that might 
injure other crops to be sprayed. Drain any remaining spray solution of THIS PRODUCT from the spray tank and dispose 
of according to label disposal instructions. Rinse the spray tank and refill with water, adding a heavy-duty detergent at the 
rate of one cup per 20 gallons of water. Recycle this mixtur e through the equipment for 5 minutes and spray out. Repeat 
this procedure twice. Fill th e spray tank with clean water, recycle for 5 minutes, and spray out. Clean pump and nozzle 
screens thoroughly. Wash away spray mixture from the outside of spray tank, nozzles or spray rig. All rinse water must be 
disposed of in compliance with local, state and Federal guidelines. 
 
APPLICATION OF THIS PRODUCT IN FLUID FERTILIZERS 
THIS PRODUCT may be applied in fluid fertilizer solutions to Alfalfa and Soybeans by following the appropriate mixing 
procedures and compatibility check. When using tank-mix combinations, be sure all components are compatible. 
Compatibility checks of this product and tank-mix combinations which include THIS PRODUCT should be made for each 
batch of fluid fertilizer because of the variability of these fertilizers. 
 
Compatibility Check: 
1. Pre-mix 2 teaspoonful of THIS PRODUCT with 8 teaspoonful of water (1:4 ratio) in a quart jar by adding the water first 
followed with this product. Mix thoroughly. If a second herbicide is to be used, double the amount of water (1:8 ratio) 
and add the second herbicide after mixing THIS PRODUCT first. 
2. Then pour 1 pint of fluid fertilizer into the quart jar and shake well. 
3. Allow to stand for 5 minutes. 
 
THIS COMPATIBILITY CHECK SHOULD ONLY BE USED WHEN MIXING WITH FLUID FERTILIZERS. 
 
Interpretation of Results: If the solution in the jar appears to be unifo rm, without signs of agglom eration or without a 
separation of an oily film on top of the fertilizer, the mixture may be used. If not, repeat the compatibility check using twice 
the amount of water or add a compatibility agent to the water. If separation occurs, but the mixture can be re-suspended 
by shaking, then application is possible with good agitation in the spray tank.

Page 8 of 71 
 
 
Tank-Mixing Guidelines: 
1. Add the required amount of water and compatibility agent (i f required) to the tank. Start agitation while adding this 
product and follow by adding the fluid fertilizer and agitate. 
2. If a second herbicide is to be used, follow as above in 1, but use twice the amount of water. Start agitation and add 
this product and follow by adding the second herbicide, and then continue filling the tank with fluid fertilizer. 
3. Maintain continuous agitation to ensure uniform spray mixture until the tank is emptied. 
 
COMMERCIAL IMPREGNATION AND APPLICATION OF THIS PRODUCT ON DRY BULK 
FERTILIZER 
 
Dry bulk fertilizer may be impregnated or coated with THIS PRODUCT for application to established Alfalfa and to 
Soybeans. All directions, restrictions and special precautions on this label must be followed along with state regulations 
relating to dry bulk fertilizer blending, impregnating and labeling. · 
Impregnation: To impregnate, use a system consisting of a belt, c onveyor or closed drum which is used for dry bulk 
fertilizer blending. Any commonly used fertilizer can be impr egnated with THIS PRODUCT e xcept ammonium nitrate or 
fertilizers containing ammonium nitrate, potassium nitrate or sodium nitrate. Do not use on powder limestone. 
 
Apply using a minimum of 200 pounds dry bulk fertilizer per acre and up to a maximum of 450 pounds per acre. To 
impregnate or coat dry bulk fertilizer, mix THIS PRODUCT with sufficient water to form a sprayable slurry. The delivery 
nozzles must be directed to deliver a fine spray toward the fe rtilizer for thorough coverage while avoiding spray contact 
with mixing equipment Uniform impregnation of THIS PRODUCT to dry bulk fertilizer will vary and if the absorptivity is not 
adequate, an absorptive powder may be added to produce a dry, free-flowing mixture. Micro-Cel E (Johns- Manville Product 
Corporation) is the recommended absorbent powder. When another herbicide is used with THIS PRODUCT, mix and 
impregnate immediately. 
Apply immediately after impregnation unless experience has shown that impregnated fert ilizer can be stored without 
becoming lumpy and difficult to spread. 
Rates: Select the specified rate of THIS PR ODUCT per acre from the appropriate se ction of this label and refer to the 
formula below to determine the amount of THIS PRODUCT which is to be impregnated on a ton of dry bulk fertilizer based 
on the amount of fertilizer which will be distributed on one acre. 
 
Lbs. of THIS PRODUCT X 2000 Lbs. Fertilizer = Lbs. of THIS PRODUCT 
 Acre Acre Ton of Fertilizer 
APPLICATION: Uniform application is essential for satisfactory weed control. Accurate calibration of fertilizer application 
equipment is essential for uniform distribution to the soil surface. The method of application is to apply half of the specified 
rate and overlap 50% or to double apply by splitting the middles to obtain the best distribution pattern. 
 
If fertilizer materials are excessively dusty, use diesel oil or other suitable additive to reduce dust prior to impregnation as 
dusty fertilizer will result in poor distribution during application. Crop injury and/or poor weed control may occur where the 
impregnated fertilizer is not uniformly applied. 
 
INCORPORATION AND COMBINATION USES: When this product is to be used in combination with another herbicide, 
follow directions on this label for combinations, rates, crops, incorporation and special precautions. 
 
CROPS 
ALFALFA AND SAINFOIN 
This product is labeled for use in Alfalfa and Sainfoin in the following areas: 
1. Alfalfa and Sainfoin (including mixed stands with grasses) (all areas except California). 
2. Alfalfa and Sainfoin (including mixed stands with grasses) (California only). 
3. Alfalfa - Tank-mix combination with Paraquat (Color ado, Idaho, Montana, Nevada, Oregon, Utah, Washington, 
Wyoming and the following California counties: Del Norte, Lassen, Modoc, Nevada, Plumas, Shasta, Sierra and 
Siskiyou). 
4. Alfalfa - Post Dormant application of this product impr egnated on dry fertilizer only (C onnecticut, Illinois, Indiana, 
Iowa, Kansas, Kentucky, Michigan, Minnesota, Nebraska, New Mexico, New York, Ohio, Oklahoma, Pennsylvania, 
South Dakota, Tennessee, Texas and Wisconsin). 
5. Alfalfa - Non-Dormant, Non-Winter Hardy varieties (Arizona only).

Page 9 of 71 
 
 
THIS PRODUCT may be used in aerial or ground spray equipment as a broadcast surface application to established 
crops of Alfalfa and Sainfoin for the control of certain grass and broadleaf weeds. 
 
Application: Refer to "USE INFORMATION" section for detailed information on the application of THIS PRODUCT. 
For information on applying THIS PRODUCT in fluid or on dry fertilizer, refer to the section "APPLICATION OF THIS 
PRODUCT IN FLUID FERTILIZERS" or "COMMERCIAL IMPREGNATION AND APPLICATION OF THIS PRODUCT 
ON DRY BULK FERTILIZER". 
 
Use Precautions: 
• For best weed control, apply THIS PRODUCT when weeds are less than 2 inches tall or before weed foliage is 2 
inches in diameter. 
• Reduced weed control may occur when extend ed dry conditions follow application of THIS PRODUCT. 
• Crop injury may occur when: 
o Crop is under stress conditions such as diseases, insect infestations, poorly drained soils, drought or Winter injury 
at time of application;
 
o Crop is treated within 12 months after seeding; 
o There is excessive irrigation or rainfall immediately after application. Do not apply more than one-half inch of 
water in the first irrigation after THIS PRODUCT is applied. 
 
Use Restrictions: 
• Use THIS PRODUCT only on established Alfalfa and Sainfoin. 
• Do not apply THIS PRODUCT after growth begins in the Spring or before growth ceases in the Fall, except as 
specified on this label.
 
• Do not graze or harvest within 28 days after application.

Page 10 of 71 
 
ALFALFA AND SAINFOIN - ALL AREAS EXCEPT CALIFORNIA 
 
Application: 
 
BROADCAST APPLICATIONS 
Crop THIS PRODUCT (Lbs./ Ac.) 
Alfalfa and Sainfoin (All areas except California) 0.3 to 1.3 (0.23 to 0.98 lb. a.i.) 
 Select the proper dosage according to weeds known to be and present in field to be treated. On loamy sand 
soils in Oregon and Washington, do not apply more than 0.66 lb./Ac. of this product (0.5 lb. a.i./Ac.). 
 
Weeds Controlled: 
 
0.3 to 0.5 Lb./Ac. of THIS PRODUCT (0.23 to 0.38 lb. a.i./Ac.) 
Chickweed, Common 
(Stellaria media) 
- - - 
0.5 to 0.6 Lb./Ac. of THIS PRODUCT (0.38 to 0.45 lb. a.i./Ac.) 
Cheatgrass (Downy brome) 
 (Bromus secalinus) 
Deadnettle, Purple 
 (Lamium purpureum) 
Downy brome 
 (Bromus tectorum) 
Japanese brome 
 (Bromus japonicus) 
Pennycress 
 (Thlaspi arvense) 
Rescuegrass 
 (Bromus catharticus) 
Shepherdspurse 
(Capsella bursa-
pastoris) 
0.6 to 1.3 Lbs./Ac.* of This Product (0.45 to 0.98 lb. a.i./Ac.) 
 Broadleaves 
Fleabane, Rough 
 (Erigeron strigosus) 
Flixweed 
 (Descurainia sophia)
 
Henbit 
 (Lamium amplexicaule) 
Kochia 
 (Kochia scoparia) 
Lambsquarters, Common 
(Chenopodium album) 
Marestail (Horseweed) 
(Conyza canadensis) 
Meadow Salsify 
(Tragopogon pratensis) 
Mustard, Blue 
 (Chorispora tenella) 
Mustard, Jim Hill (Tumble) 
 (Sisymbrium altissimum) 
Mustard, Tansy 
 (Descurainia pinnata) 
Pepperweed 
 (Lepidium virginicum) 
Pigweed, Redroot 
 (Amaranthus retroflexus) 
Prickly lettuce 
 (Lactuca serriola) 
White cockle 
 (Melandrium album) 
Wild buckwheat 
 (Polygonum 
convolvulus) 
 Yellow Rocket 
 (Barbarea vulgaris) 
 Grasses 
Foxtail, Green 
 (Setaria viridis) 
Little Barley 
 (Hordeum pusillum) 
Smooth brome 
 (Bromus inermis) 
 Wild oats 
 (Avena fatua) 
1.3 Lbs./Ac.* of This Product (0.98 lb. a.i./Ac.) 
Broadleaves 
Chickweed, Mousear 
 (Cerastium vulgatum) 
Dandelion 
 (Taraxacum officinale) 
Ragweed, Common 
 (Ambrosia artemisiifolia) 
 - 
Grasses 
Barnyardgrass 
 (Echinochloa crus-galli) 
Bluegrass 
 (Poa annua) 
Foxtail Barley 
 (Hordeum jubatum) 
 - 
*Weeds Partially Controlled: At the rate of 0.6 to 1.3 lbs./Ac. (0.45 to 0.98 lb. a.i./Ac.), THIS PRODUCT may be 
used to reduce the competition of German Moss or Knawel (Scleanthus annus). At the rate of 1.3 lbs./Ac. (0.98 
lb. a.i./Ac.), THIS PRODUCT may be used to reduce the competition from Curly dock (Rumex crispus). 
 
 
For Use on Mixed Stands of Alfalfa and Grasses: 
Rates of 0.6 to 1 pound of THIS PRODUCT (0.45 to 0.75 lb. a.i.) per acre will provide partial reduction of forage grass 
stands. These rates may be used to reduce forage grass stands to prevent crowding out of Alfalfa. Higher rates will 
severely reduce forage grass stands.

Page 11 of 71 
 
Do not use THIS PRODUCT on sand soils. In areas west of the Rocky Mountains, do not use THIS PRODUCT on 
soils with calcareous surface area, high levels of lime or sodium or a pH greater than 8.2. 
 
ALFALFA AND SAINFOIN INCLUDING MIXED STANDS WITH GRASSES - CALIFORNIA 
ONLY 
THIS PRODUCT may be used in aerial or ground spray equipment as a broadcast surface application to dormant 
established crops of Alfalfa and Sainfoin.
 
 
Application: 
THIS PRODUCT may be used in aerial or ground spray equipment as a broadcast surface application to dormant 
established crops of Alfalfa and Sainfoin for control of certain grass and broadleaf weeds. 
 
Do not apply THIS PRODUCT after growth begins in the Spring or before growth ceases in the Fall. Do not apply to 
either Alfalfa or Sainfoin during the first growing season after seeding.
 
 
For information on applying THIS PRODUCT in fluid fertilizer solutions to Alfalfa, refer to the appropriate section of 
this label.
 
 
For information on commercial impregnation and application of THIS PRODUCT on dry bulk fertilizer, refer to the 
appropriate section of this label. 
 
BROADCAST APPLICATIONS 
Crop THIS PRODUCT (Lb./ Ac.) 
 Alfalfa and Sainfoin (California Only) 0.5 to 1.3 (0.38 to 0.98 lb. a.i.) 
Select the proper dosage according to weeds known to be present in the field to be treated. Apply specified dosage in 
20 to 40 gallons of water per acre with ground spray equipment or 3 to 10 gallons of water per acre with aerial spray 
equipment fitted with nozzles suitable for broadcast applications of herbicides. Treat only dormant established crops of 
Alfalfa and Sainfoin. 
Injury may occur to Alfalfa if this product is applied earlier than 12 months after seeding. Do not apply after Spring 
growth begins or before growth ceases in the Fall. Do not graze or harvest within 28 days after application. 
At the 1.3 lbs./Ac. (0.98 lb. a.i./Ac.), THIS PRODUCT may be used for suppression of Curly dock. 
 
Weeds Controlled: 
 
0.5 to 0.6 Lb./Ac. of THIS PRODUCT (0.38 to 0.45 lb. a.i./Ac.) 
Cheatgrass (Downy brome) 
 (Bromus secalinus) 
 - - - 
0.6 to 1.3 Lbs./Ac. of THIS PRODUCT (0.45 to 0.98 lb. a.i./Ac.) 
Broadleaves 
Chickweed, Common 
 (Stellaria media) 
Flixweed 
 (Descurainia sophia) 
Henbit 
 (Lamium amplexicaule) 
Kochia 
 (Kochia scoparia) 
Meadow Salsify 
 (Tragopogon pratensis) 
Mustard, Blue
 
 (Chlorispora tenella) 
Mustard, Tansy 
 (Descurainia pinnata) 
Pepperweed, Virginia 
 (Lepidium virginicum) 
Shepherdspurse 
 (Capsella bursa-pastoris) 
White cockle 
 (Melandrium album) 
 Wild buckwheat 
 (Polygonum convolvulus) 
 Yellow rocket 
 (Barbarea vulgaris) 
Grasses 
Smooth brome 
 (Stellaria media) 
Wild oats 
 (Avena fatua) 
- - 
1.3 Lbs./Ac. of THIS PRODUCT (0.98 lb. a.i./Ac.) 
Broadleaves 
Dandelion 
 (Taraxacum officinale) 
- - -

Page 12 of 71 
 
Grasses 
Barnyardgrass 
 (Echinochloa crus-galli) 
Bluegrass 
 (Poa annua) 
Foxtail Barley 
 (Hordeum jubatum) 
- 
 
For Use on Mixed Stands of Alfalfa and Grasses: 
Rates of 0.6 to 1.3 pounds per acre of THIS PRODUCT
 (0.45 to 0.98 lb. a.i./Ac.) will provide partial reduction of forage 
grass stands. These rates may be used to reduce forage grass stands to prevent crowding out of Alfalfa. Higher 
rates will severely reduce forage grass stands. 
Do not apply with aerial spray equipment when wind speed is greater than 10 mph. Do not apply when weather 
conditions favor spray drift and/or when sensitive cool season crops, such as Cole crops, Onions, Peas or 
Strawberries are present in adjacent fields. Applications should not be made when weather conditions favor spray 
drift, especially in areas where Wheat is growing on coarse textured so ils in adjacent fields or injury may occur.
 
 
ALFALFA – THIS PRODUCT TANK-MIXED WITH PARAQUAT 
(Colorado, Idaho, Montana, Nevada, Oregon, Utah, Washington, Wyoming and the following California 
counties: Del Norte, Lassen, Modoc, Nevada, Plumas, Shasta, Sierra and Siskiyou) 
Application: 
THIS PRODUCT plus Paraquat tank-mixed may be used du ring the dormant season in aerial or ground spray 
equipment as a broadcast surface application to established Alfalfa for the control of certain grass and broadleaf 
weeds. 
Do not apply THIS PRODUCT plus Paraquat tank-mixed to growth that is more than 2 inches tall. Apply once per 
season. Do not apply following cuttings during growth season. Use a minimum of 10 gallons of water per acre with 
aerial spray equipment and a minimum of 20 gallons of water per acre with ground spray equipment. Add a nonionic 
spreader at label rates to the spray solution. 
 
Rate /Ac. BROADCAST APPLICATIONS 
0.3 to 1 lb. of 
THIS PRODUCT 
+ 
Labeled rate of 
Paraquat 
 
Apply specified dosages of THIS PRODUCT and Paraquat in at least 10 gallons of water per 
acre with aerial equipment or at least 20 gall ons of water per acre with ground equipment. Do 
not apply this tank-mix to Alfalfa growth if more than 2 inches tall. For best weed control, apply 
when broadleaf weeds and grasses are 1 to 6 inches tall and are actively growing. Care should 
be taken to avoid overlaps. Do not apply more than 0.6 lb./Ac. of THIS PRODUCT (0.45 lb. 
a.i./Ac.) on loamy sand soils. Reduced weed control may occur when extended dry conditions 
follow application of this product. Crop injury may occur if Alfalfa is under stress conditions such 
as diseases, insect infestations, drought or Winter injury or if this product is applied to Alfalfa 
earlier than 12 months after seeding. 
 
Weeds Controlled: 
THIS PRODUCT plus Paraquat at labeled rates tank-mixed will control established weeds. Paraquat controls weeds 
by contact activity. 
 
0.3 to 0.5 Lb./Ac. of THIS PRODUCT (0.23 to 0.38 lb. a.i./Ac.) 
Common Chickweed - - - 
0.5 to 1 Lb./Ac. of THIS PRODUCT (0.38 to 0.75 lb. a.i./Ac.) 
Bluegrass 
Cheat 
Downy brome 
Field pennycress 
Henbit 
Japanese brome 
Rescuegrass 
Shepherdspurse 
0.6 to 1 Lb./Ac. of THIS PRODUCT (0.45 to 0.75 lb. a.i./Ac.) 
Blue mustard 
Common lambsquarters 
Flixweed 
Green foxtail 
Groundsel 
Jim Hill mustard 
Kochia 
Little Barley 
Marestail (Horseweed) 
Meadow salsify 
Pepperweed 
Prickly lettuce 
Redroot pigweed 
Rough fleabane 
Ryegrass 
Smooth brome 
Sowthistle 
Tansy mustard 
White cockle 
Wild buckwheat 
Wild oats 
Yellow rocket

Page 13 of 71 
 
 
For Use on Mixed Stands of Alfalfa and Grasses: 
Rates of 0.6 to 1 pound per acre of THIS PRODUCT (0.45 to 0.75 lb. a.i./Ac.) w ill provide partial reduction of forage 
grass stands. These rates may be used to reduce forage grass stands to prevent crowding out of Alfalfa. 
Use Restrictions: 
• Do not graze or harvest within 42 days after application. 
• In areas west of the Rockies, do not use THIS PRODUCT on soils with calcareous surface, soils with high levels 
of lime or sodium and with a pH greater than 8.2. 
• Do not apply when weather conditions favor spray drift. Do not apply by air when wind speed is greater than 10 
mph. 
• Do not use on sand soil. 
 
Refer to the Paraquat tank-mix partner’s label for additi onal directions, weed species controlled and precautions. 
 
ALFALFA - POST-DORMANT APPLICATION OF THIS PRODUCT IMPREGNATED ON DRY 
FERTILIZERS ONLY 
(Connecticut, Illinois, Indiana, Iowa, Kansas, Kentucky, Michigan, Minnesota, Nebraska, New Mexico, New 
York, Ohio, Oklahoma, Pennsylvania, South Dakota, Tennessee, Texas and Wisconsin) 
THIS PRODUCT may be applied after dormancy has broken, but prior to 3 inches of new Alfalfa shoot growth, only 
when impregnated on dry fertilizer in C onnecticut, Illinois, Indiana, Iowa, Kansas, Kentucky, Michigan, Minnesota, 
Nebraska, New Mexico, New York, Ohio, Oklahoma, Pennsylvania, South Dakota, Tennessee, Texas and Wisconsin. 
 
Apply at rates of 1 to 1.3 pounds per acre of THIS PRODUCT (0.75 to 0.98 lb. a.i./Ac.) as directed on this label for 
application during dormancy. Apply only when Alfalfa foliage is dry or crop injury may occur. When using this 
application method, do not harvest or graze treated Alfalfa for 60 days after application. 
 
ALFALFA - NON-DORMANT / NON-WINTER HARDY VARIETIES 
(Arizona Only)
 
THIS PRODUCT may be used as a broadcast surface application to established crops of non-dormant Alfalfa varieties 
for pre-emergence and post-emergence control of certain Winter annual weeds following either a Fall or Winter sheep 
grazing or green-chop harvest. 
 
Application: 
BROADCAST APPLICATIONS 
Crop THIS PRODUCT (Lb./Ac.) 
 Alfalfa (Non-dormant, Non-Winter hardy varieties) 0.5 to 0.6 (0.38 to 0.45 lb. a.i./Ac.) 
Apply specified dosage by aerial or ground spray equipment in 7 to 40 gallons of water per acre. Treat established Alfalfa 
stubble after Fall or Winter sheep grazing or green-chop harvest and prior to the time regrowth is 2 inches tall. Alfalfa 
foliage present at time of application can exhibit yellowing. Injury may occur to Alfalfa in areas of high salt concentration 
where the crop is stunted and/or has a poorly developed ro ot system or if Alfalfa is un der stressed growing conditions 
such as diseases, insect infestations or drought. For most effective post-emergence weed control, treatment should be 
made before weeds are 2 inches tall or before leaf rosettes are 2 inches wide. For maximum control, rainfall (0.25 inch 
or more) or irrigation is necessary within 30 days of treatment, however, do not flood irrigate within 2 days after treatment. 
Use 0.5 lb./Ac. of this product (0.38 lb . a.i./Ac.) on sand soil when only Canary grass, Goosefoot, Lambsquarters or 
Mustard are the weeds to be controlled. Do not apply earlier than 6 months after seeding. Do not graze or harvest within 
28 days after application.

Page 14 of 71 
 
Weeds Controlled: 
 
Field pepperweed 
Lambsquarters 
Little mallow (Cheeseweed) 
Littleseed canarygrass 
London rocket (Mustard) 
Prickly lettuce 
Mouse Barley 
Nettleleaf goosefoot 
Shepherdspurse 
Silversheath knotweed 
Spiny sowthistle 
 
Use Precaution: 
• To ensure a uniform spray mixture, maintain continuous mechanical agitation in the spray tank. 
 
Use Restrictions: 
• Do not apply with aerial spray equipment when wind speed is greater than 10 mph. 
• Do not apply when weather conditions favor spray drift and/or when sensitive cool season crops, such as Cole crops, 
Onions, Peas or Strawberries are present in adjacent fields. 
• Do not apply when weather conditions favor drift especially in areas where Wheat is growing on coarse textured soils 
in adjacent field or injury may occur. 
 
ASPARAGUS (ESTABLISHED) 
Application: 
THIS PRODUCT may be used in ground spray equipment or sprinkler irrigation (center pivot, lateral move or solid 
set) systems as a single pre-emergence broadcast application or as a split application consisting of a pre-emergence 
broadcast application followed by a post-harvest broadcast application. · 
 
Refer to the "USE INFORMATION" section of this label for directions. 
 
BROADCAST APPLICATIONS 
Crop THIS PRODUCT (Lbs. / Ac.) 
 Asparagus 1.3 to 2.6 (0.98 to 0.45 lb. a.i./Ac.) 
 (Pre-emergence 
application only) Pre-emergence Application Only: Make a single surface application in early Spring before 
Asparagus spears or ferns emerge. If the field is to be disked, apply this product after disking 
but before crop emerges. Use the lower specified rate for control of the broadleaf weeds listed 
above. Use the higher rate in fields with a hist ory of severe infestations of grasses and for 
maximum residual control. Do not apply within 14 days of harvest. 
 Asparagus 0.6 to 1.3 (0.45 to 0.98 lb. a.i./Ac.) (Pre-emergence) 
 (Split application) + 
 1.3 to 2 (0.98 to 1.5 lb. a.i./Ac.) (Post-harvest) 
 
 Split Application: Pre-emergence and Post-harvest 
 Pre-emergence Application: Apply before Asparagus spears or ferns emerge. If the field is 
 to be disked, apply after disking but prior to crop emergence. Do not apply within 14 days 
 of harvest. 
 Post-harvest Application: Apply after last harvest of the season but prior to emergence. 
 The lower combination rates may be used for control of Common ragweed, Lambsquarters, 
 Redroot pigweed and Red sorrel. Use the higher specified combination rates for other weeds 
listed or in fields with severe grass infestations or for maximum post-harvest control of 
emerged weeds. 
 IMPORTANT: The total amount of THIS PRODUCT applied in one crop season may not exceed 2.66 lbs./Ac. (2.0 lb. 
a.i./Ac.) 
 
Weeds Controlled: 
This product applied to established Asparagus according to label directions will effectively control the following 
weeds.

Page 15 of 71 
 
Broadleaves 
Chickweed, Common 
 (Stellaria media) 
Jimsonweed 
 (Datura stramonium) 
Lambsquarters 
 (Chenopodium album) 
Pigweed, Redroot 
 (Amaranthus retroflexus) 
Ragweed, Common 
 (Ambrosia artemisiifolia) 
Smartweed, Pennsylvania 
 (Polygonum pensylvanicum) 
Sorrel, Red 
 (Rumex acetosella) 
Velvetleaf 
 (Abutilon theophrasti) 
Grasses 
Crabgrass 
 (Digitaria spp.) 
Foxtails 
 (Setaria spp.) 
Sandbur, Field 
 (Cenchrus pauciflorus) 
- 
 
Use Restrictions: 
• Aerial application is prohibited. 
• Do not use on newly seeded Asparagus nor on young plants during the first growing season after setting crowns. 
• Do not make post-harvest applications until after the last harvest of spears. 
 
 
CARROTS 
Application: 
Apply THIS PRODUCT with ground equipment as specified below. For effective control of broadleaf weeds with post-
emergence applications, apply THIS PRODUCT before weeds are 1 inch in height or diameter. Thorough spray 
coverage is essential for adequate weed control. 
Do not use air blast or other high-pressure spray equipment to make post-emergence applications of THIS PRODUCT. 
Refer to the appropriate section of this label for additional information regarding spray equipment, dilution rates, 
mixing, sprayer cleanup, restrictions, container disposal and precautions. 
Refer to "MIXING" under the "USE INFORMATION" section in the front of this label. 
For specific application information, see "USE INFORMATION" section at the front of this label. 
 
BROADCAST APPLICATIONS 
Crop THIS PRODUCT (Lb. / Ac.) 
 Carrots 0.3 (0.23 lb. a.i./Ac.) 
Apply specified dosage per acre as a broadcast spray over the top of Carrots plants 
after Carrots have formed 5 to 6 true leaves but before weeds are 1 inch in height or 
diameter. If needed, a second application may be made after an interval of at least 3 
weeks. Applications may be made up to 60 days of harvest. 
IMPORTANT: The total amount of THIS PRODUCT applied in one crop season must not exceed 0.66 
lb./Ac. (0.5 lb. a.i./Ac.). 
 
Weeds Controlled: 
This product applied to Carrots according to label directions will effectively control the following weeds: 
 
Carpetweed 
 (Mullugo verticillata) 
Galinsoga 
 (Galinsoga parviflora) 
Horseweed/Marestail 
 (Conyza canadensis) 
Lambsquarters, Common 
 (Chenopodium album) 
Mustard, Wild 
 (Sinapis arvensis) 
Pigweed, Redroot 
 (Amaranthus retroflexus) 
Pigweed, Smooth 
 (Amaranthus hybridus) 
Pineappleweed 
 (Matricaria matricarioides) 
Prickly lettuce 
 (Lactuca serriola) 
Shepherdspurse 
 (Capsella bursa-
pastoris)
 
 
 
Use Precautions: 
• Crop injury or delayed maturity may result from applications of THIS PRODUCT if Carrots are growing under stress 
conditions such as periods of drought or cool, wet and cloudy weather preceding application. 
• Following an application of this product, chlorosis (yellowing) and burning of the leaf tissue may occur.

Page 16 of 71 
 
• For newly introduced varieties of Carrots with unknown tolerance to THIS PRODUCT, treat only a small area to 
determine if THIS PRODUCT can be used without injury to the crop. 
• Excessive crop injury will result if THIS PRODUCT is applied to Carrots on very hot days. 
• Apply THIS PRODUCT only after Carrots have at least 5 to 6 true leaves. Earlier applications will result in excessive 
crop damage. 
 
Use Restrictions: 
• Do not apply to Carrots grown for seed. 
• Do not apply within 3 days after periods of cool, wet or cloudy weather or crop injury will occur. 
• Do not apply THIS PRODUCT within 3 days of use of any other chemical(s) unless specified on this label. 
 
CEREALS (SPRING AND WINTER BARLEY, WINTER WHEAT) 
THIS PRODUCT may be used for control or suppression of certain grasses and broadleaf weeds when applied post-
emergence to Spring and Winter Barley or Winter Wheat. THIS PRODUCT alone and several tank-mixture 
treatments may be used in the following states: AR, GA, ID, IL, IN, KS, KY, LA, MS, MO, MT, NV, OH, OK, OR, TN, 
TX, UT, WA. 
 
Performance Factors: 
Weed control may not be observed for 2 to 4 weeks under normal growth conditions and for 4 to 6 weeks under very 
dry conditions. Moisture (at least 0.5 inch) is required within 2 to 3 weeks after application to move THIS PRODUCT 
into the weed root zone. Lack of adequate moisture after ap plication may result in poor or erratic weed control. 
Control or suppression of listed weeds is dependent on weed size at time of application. Control or suppression may 
be reduced if broadleaf weeds are taller than 1 inch or grasses have more than 2 leaves. 
 
Mixing: 
See the "USE INFORMATION" section of this label for specific mixing procedures. When tank-mixing, carefully 
follow the instructions on this label. Refer to the other product labels registered for use in Barley and Winter Wheat 
for additional use directions, rates, weeds controlled and restrictions.
 
 
Application: 
THIS PRODUCT alone or in a tank-mixture with labeled broadleaf herbicides may be applied by aerial or ground 
spray equipment as a broadcast post-emergence spray. Use a minimum spray volume of 2 gpa by air and 10 gpa by 
ground. Uniform spray coverage is necessary to obtain maximum weed control and to minimize potential for crop 
injury. THIS PRODUCT may be applied more than once per crop season. Allow a minimum of 21 days between 
applications if Wheat is actively growing or allow 45 days between applications if Wheat is growing in adverse 
conditions, has entered dormancy or is stressed due to frost damage, disease, drought or excessive moisture. On 
irrigated Cereals, do not apply more than 0.5 inch of water for the first irrigation, the maximum amount for each 
additional irrigation must not exceed 1 inch. Allow a minimum of 14 days between the first irrigation and subsequent 
irrigations.

Page 17 of 71 
 
 
POST-EMERGENCE BROADCAST APPLICATIONS OF THIS PRODUCT 
 Crop Growth 
Stage 
 
Soil Texture 
 THIS PRODUCT (Oz./Ac.) 
 Organic Matter 
0.75 to 2.0% > 2.0% 
2 Leaf 
to 
2 Tillers 
Coarse 1 to 2 (0.05 to 0.09 lb. a.i.) 1 to 3 (0.05 to 0.14 lb. a.i.) 
Medium 1 to 3 (0.05 to 0.14 lb. a.i..) 2 to 3 (0.09 to 0.14 lb. a.i.) 
Fine 2 to 3 (0.09 to 0.14 lb. a.i.) 2 to 4 (0.09 to 0.19 lb. a.i.) 
Use these rates on crops with secondary roots smaller than 1 inch. 
For dryland Winter Wheat (non-irrigated), apply the highest specified rate to achieve maximum 
weed suppression/control. 
3 to 4 
 Tillers 
Coarse 3 to 4 (0.14 to 0.19 lb. a.i.) 4 to 5 (0.19 to 0.23 lb. a.i.) 
Medium 4 to 5 (0.19 to 0.23 lb. a.i.) 5 to 6 (0.23 to 0.28 lb. a.i.) 
Fine 5 to 6 (0.23 to 0.28 lb. a.i.) 5 to 6 (0.23 to 0.28 lb. a.i.) 
Do not apply within 2 weeks after grazing or break ing of Winter dormancy. Apply after the crop is 
at or beyond the 3 tiller growth stage but before jointing. Secondary roots should be developed and 
larger than 1 inch long. Do not apply before 75 days after planting. 
For dryland Winter Wheat (non-irrigated), apply t he highest specified rate to achieve maximum 
weed suppression/control. 
 Georgia Only: Wheat must be planted before November 15 in the Piedmont area and Northern 
part of the state and before December 1 in the Coastal Plain area. 
Over 4 Tillers Coarse 4 to 6 (0.19 to 0.28 lb. a.i.) 5 to 8 (0.23 to 0.38 lb. a.i.) 
Medium 4 to 8 (0.19 to 0.38 lb. a.i.) 5 to 8 (0.23 to 0.38 lb. a.i.) 
Fine 5 to 8 (0.23 to 0.38 lb. a.i.) 8 to 10.6 (0.38 to 0.5 lb. a.i.) 
 Do not apply within 2 weeks after grazing or break ing of Winter dormancy. Apply after the crop is 
at or beyond the 3 tiller growth stage but before jointing. Secondary roots should be developed and 
larger than 1 inch long. Do not apply before 75 days after planting. 
For dryland Winter Wheat (non-irrigated), apply t he highest specified rate to achieve maximum 
weed suppression/control. 
Georgia Only: Wheat must be planted before November 15 in the Piedmont area and Northern 
part of the state and before December 1 in the Coastal Plain area.
 
 
Weeds Controlled: 
Used at specified rates, THIS PRODUCT will control many annual broadleaf weeds. Control is best when applied to 
young, actively growing weeds. Weeds controlled by THIS PRODUCT include: 
 
Bittercress 
Catchfly Conical (Sand) 
Catchweed (Madwort) 
Chickweed, Common 
Chickweed, Mousear 
Corncockle Dogfennel 
(Mayweed) 
Evening Primrose, Cutleaf 
Falseflax, Smallseed 
Fiddleneck, Tarweed 
Filaree, Redstem 
Geranium 
Carolina Gromwell, spp. 
Henbit 
Knotweed, Prostrate 
Lambsquarter, Common 
Lettuce, Miners 
Mustard, Blue 
Radish, Wild 
Mustard, Wild 
Pennycress, Field 
Pepperweed, Virginia 
Pigweed, spp. 
Pineappleweed 
Polemonium, Annual (Jacob’s 
ladder) 
Shepherdspurse 
Speedwell, Ivyleaf 
Turnip, Wild 
 
Weeds Suppressed: 
Control by THIS PRODUCT of the following weeds varies from poor to excellent depending on time of application, 
stage of growth at application, temperatures and soil moisture conditions following treatment. For maximum effect 
on these weeds, apply the highest labeled rate at the earlie st growth stage timing for each particular soil type and 
organic matter. Suppression is a reduction in weed size and growth as compared to a non-treated area in the same 
field.

Page 18 of 71 
 
Broadleaves 
Buckwheat, Wild* 
Buttercup, spp. 
Cowcockle 
Kochia* 
Lettuce, Prickly 
Mustard, Tansy 
Mustard, Tumble 
 (Jim Hill)* 
Thistle, Russian 
Vetch, Winter 
Grasses 
Barley, Hare (Wild) 
Barley, Little 
Blackgrass 
Bluegrass, Annual 
Bluegrass, Bulbous 
Brome, Downy* 
Brome, Japanese* 
Brome, Ripgut* 
Cheat* 
Foxtail, spp.* 
Oat, Wild* 
Rescuegrass* 
Whitlowgrass, Spring 
(Vernal) 
Windgrass 
 *Use the highest labeled rate of THIS PRODUCT for maximum weed suppression. 
 
Tank-Mixtures: 
THIS PRODUCT may be tank-mixed with Bromoxynil, 2,4-D, Dicamba, MCPA, Metsulfuron, Triasulfuron, Chlorsulfuron 
+ Metsulfuron, Chlorsulfuron, Thifensulfuron + Tribenuron (premix) herbicides. A nonionic surfactant containing at least 
80% active ingredient (e.g., Surf-AC ® 820) may be used in THIS PRODUCT tank-mixes with Sulfonylurea herbicides. 
Do not use a crop oil concentrate (COC) or any adjuvant containing vegetable or petroleum oils with any tan-mixture 
with THIS PRODUCT as crop injury may result. Additional pesticides may also be tank-mixed with THIS PRODUCT 
unless specifically prohibited on the label of the tank-mix product(s). In some instances, combinations with 
organophosphate insecticides may cause temporary leaf yellowing and/or crop injury, especially when widely 
fluctuating day/night temperatures occur near application. 
 
 
It is the pesticide user’s responsibility to ensure that all products are registered fo r the intended use. Read and follow the 
applicable restrictions and limitations and directions for use on all product labels involved in tank-mixing. Users must follow 
the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
Use Precautions: 
Crop injury may occur if THIS PRODUCT is applied: 
• When the crop is under stress such as Winter kill, frost damage, disease, drought or excessive moisture, severe 
grazing, or when these conditions follow the application. 
• In combination with fluid fertilizer especially with the addition of surfactant. 
• Prior to the growth stage specified on this label. 
• To soils high in lime or sodium, a pH greater than 7.7, calcareous, gravelly, thinly covered or exposed subsoil areas. 
• To fields where Cereal seeds have been planted less than 1 inch deep. 
• To a non-Winter hardy Wheat or Barley variety. 
• To a sensitive Wheat or Barley variety as listed below. 
• To frozen soil or crop still in Winter dormancy. 
 
Use Restrictions: 
• Do not apply THIS PRODUCT through any type of irrigation equipment. 
• Do not use on soils containing less than 0.75% organic matter. 
• Do not apply more than a total of 10.66 ounces THIS PR ODUCT (8 ozs. a.i.) (0.5 lb. a.i.) per acre per year. 
• Do not graze Wheat within 14 days of application of THIS PRODUCT or harvest grain within 21 days after last 
application. 
• Do not graze or harvest Barley before crop maturity. 
 
Spring and Winter Barley and Winter Wheat Rotations Following Potatoes Treated with THIS PRODUCT: 
If planting a sensitive Cereal variety (see “Wheat and Barley Varietal Tolerance” section below) following Potatoes 
treated with THIS PRODUCT or Metribuzin containing products, refer to the “POTATO” section of this label for special 
cultural practices to follow.

Page 19 of 71 
 
 
Wheat and Barley Varietal Tolerance: 
Wheat and Barley varieties vary in their tolerance to THIS PRODUCT. To avoid possible crop injury on any Wheat 
and/or Barley, variety contact your local agricultural extension specialist or seed company representative for a variety 
recommendation prior to treatment or treat a small strip of the unlisted variety with the labeled rate of THIS PRODUCT 
to ascertain crop tolerance before treating an entire field.
 
 
Spring/Durum Wheat: Avoid use of THIS PRODUCT on Spring Wheat and Durum Wheat varieties. 
 
WHEAT / FALLOW / WHEAT ROTATION 
(Idaho, Oregon, Utah and Washington Only) 
Application During Fallow Period: 
THIS PRODUCT may be applied to provide weed control during the fallow period after Wheat harvest or in the 
Spring before Winter Wheat is planted. Winter Wheat can be seeded 4 months (120 days) after Spring 
application. Mechanical tillage or the application of a contact herbicide may be required to control weeds 
germinating prior to seeding of Winter Wheat. Best results will be obtained where straw and chaff are evenly 
distributed across the field. 
For specific application information, see the "USE INFORMATION" section in the front of this label. 
Where weed growth is present at application time, apply THIS PRODUCT with Paraquat or other contact 
herbicide. Refer to the other product label registered for additional directions, rates and weed species controlled. 
 
After Harvest Application (Fall Fallow): 
THIS PRODUCT may be applied to Wheat stubble after harvest in the Fall. Apply 0.6 to 0.8 pound (0.45 to 0.6 lb. a.i.) 
per acre broadcast before weeds emerge. Use higher rate for longer weed control or for weeds designated as requiring 
the higher rate for control. Rainfall (0.5 inch or more) is necessary for herbicide activation. 
Do not plant crops in treated areas for at least 10 months following Fall applications. 
THIS PRODUCT may be applied at 0.6 to 0.8 pound (0.45 to 0.6 lb. a.i.) per acre as directed above for a Fall 
application. If other vegetation is present at the time of application, use a contact herbicide. 
 
Spring Application (Summer Fallow): 
THIS PRODUCT may be applied to Wheat stubble in the Spring. Apply 0.5 to 0.6 pound (0.38 to 0.45 lb. a.i.) per acre 
broadcast before weeds emerge in the Spring. Use higher rate for longer weed control or weeds designated as 
requiring higher rate for control. Rainfall (0.5 in ch or more) is necessary for herbicide activation.
 
 
Weeds Controlled: 
 
Broadleaves 
Chickweed, Common 
 (Stellaria media) 
Henbit 
 (Lamium amplexicaule) 
Kochia* 
 (Kochia scoparia) 
Lambsquarters 
(Chenopodium album) 
Mustard, Blue or Purple 
(Chorispora tenella) 
Mustard, Jim Hill 
 (Sisymbrium altissimum) 
Mustard, Tansy 
 (Descurainia pinnata) 
Mustard, Treacle 
 (Eyrsimum repandum) 
Mustard, Wild 
 (Brassica kaber) 
Pennycress, Field 
 (Fanweed) 
 (Thlaspi arvense) 
Pigweeds 
 (Amaranthus spp.) 
Russian Thistle* 
 (Salsola iberica) 
Wild Sunflower* 
 (Helianthus spp.) 
Grasses 
Cheatgrass 
(Bromus secalinus) 
 Downy Brome 
 (Bromus tectorum) 
 Wheat, Volunteer* 
 (Triticum spp.) 
- 
* Since control of these weeds may be variable depending on moisture following application, the higher label rate 
should be used. 
 
Use Restrictions: 
• Do not graze treated fields. 
• Do not plant Spring seeded Cereals following Fall fallow applications of THIS PRODUCT. 
• Where THIS PRODUCT was applied in the Fall, do not apply THIS PRODUCT in the Spring.

Page 20 of 71 
 
 
FALLOW ROTATION WITH BARLEY AND WHEAT 
(Colorado, Kansas, Montana, Nebraska, and Wyoming Only) 
Application During Fallow Period: 
THIS PRODUCT may be applied to provide weed control during the fallow period after Wheat or Barley harvest or in 
the Spring before planting of Winter Wheat or Barley. Mechanical tillage or the application of a contact herbicide may 
be required to control weeds germinating prior to seeding of Winter Wheat or Barley. 
For specific application information, see the "USE INFORMATION" section in the front of this label. 
Where weed growth is present at application time, apply THIS PRODUCT with Paraquat, Glyphosate or other contact 
herbicides. Refer to the other product label registered for additional directions, rates, and weed species controlled. 
Do not plant crops in treated areas earlier than 10 months following Fall applications. 
 
Application After Harvest (Fall Fallow): 
THIS PRODUCT may be applied to the stubble after harvest in the Fall. Apply 0.8 to 1 pound (0.6 to 0.75 lb. a.i.) (per 
acre broadcast before weeds emerge. Use the higher rate for longer weed control or for weeds designated as requiring 
the higher rate for control. Rainfall (0.5 inch or more) is necessary for herbicide activation. 
 
Spring Application (Summer Fallow): 
THIS PRODUCT may be applied to the stubble in the Spring. Apply 0.5 to 0.6 pound (0.38 to 0.45 lb. a.i.) per acre 
broadcast before weeds emerge in the Spring. Use the higher rate for longer weed control or weeds designated as 
requiring the higher rate for control. Rainfall (0.5 inch or more) is necessary for herbicide activation. Wheat or Barley 
can be seeded 120 days after Spring application.
 
 
Weeds Controlled: 
 
Broadleaves 
Chickweed, Common Lambsquarters 
 (Chenopodium album) 
Mustard, Blue or Purple 
 (Chorispora tenella) 
Mustard, Jim Hill 
 (Sisymbrium altissimum) 
Mustard, Tansy 
 (Descurainia pinnata) 
Mustard, Treacle Pigweeds 
 (Stellaria media) 
Cowcockle 
 (Vaccaria pyramidata) 
Henbit 
 (Lamium amplexicaule) 
Kochia* 
 (Kochia scoparia) 
 (Eyrsimum repandum) 
Mustard, Wild 
 (Brassica kaber) 
Pennycress, Field 
 (Fanweed)
 
 (Thlaspi arvense) 
 (Amaranthus spp.) 
Russian Thistle 
 (Salsola iberica) 
Sunflower 
 (Helianthus spp.)
 
Grasses 
Cheatgrass 
 (Bromus secalinus) 
Downy Brome 
 (Bromus tectorum) 
 Foxtail, Green* 
 (Setaria viridis) 
 Wheat, Volunteer* 
(Triticum spp.) 
 Wild Oats* 
(Avena fatua) 
*Since control of these weeds may vary depending on moisture following application, use the higher rate 
specified above. 
 
Use Restrictions: 
• Do not graze treated fields. 
• Do not plant Spring seeded Cereals following Fall applications for fallow. 
• Where THIS PRODUCT was applied in the Fall, do not apply THIS PRODUCT in the Spring. 
• Do not rotate any crop not listed on this label for 18 months following application of THIS PRODUCT.

Page 21 of 71 
 
 
CORN (FIELD) 
POST-EMERGENCE APPLICATION 
THIS PRODUCT may be used for control of selected broadleaf weeds when applied as a tank-mix combination with certain 
broadleaf herbicides presently registered and also for post-emergence use in Field Corn. Herbicides which may be tank-
mixed with THIS PRODUCT include: 
 
Atrazine 
Bentazon 
 Bromoxynil 
 Bromoxynil + Atrazine 
 2,4-D 
Dicamba + Atrazine (premix) 
Dicamba 
Flumiclorac 
Imazethapyr 
 
Application: This product may be applied to Field Corn after crop emergence until just prior to tasseling. Broadcast 
applications may be made with ground or aerial equipment. For optimum weed control, apply treatments when weeds 
are small and actively growing, but before reaching the maximum heights listed in the “WEEDS CONTROLLED – 
POST-EMERGENCE BROADCAST APPLICATION” and “WEEDS CONTROLLED – POST-DIRECTED 
APPLICATION” tables. 
 
POST-EMERGENCE BROADCAST APPLICATION 
Ground Application: Adjust nozzle height above crop and weed canopy to ensure uniform spray coverage. 
Gallonage should be increased with increasing weed size and population density. 
 
For tank-mixes of THIS PRODUCT plus Atrazine, Bentazon, Bromoxynil, Bromoxynil + Atrazine (premix), 2,4-D 
Amine, Flumiclorac and/or Imazethapyr formulations, use flat fan nozzles spaced a maximum of 20 inches apart. 
Best results are achieved using a minimum spray volume of 10 gallons per acre and spray pressure from 20 to 40 
psi. 
 
For tank-mixes of THIS PRODUCT with Dicamba, Atrazine + Dicamba (premix) or 2,4-D low volatile ester 
formulations, use drift-reducing nozzles which are specifically designed to produce coarse sprays and reduce the 
amount of driftable fines. Additional measures which will help avoid potential drift to sensitive crops and plants include 
using a minimum spray volume of 20 gallons per acre and keeping spray pressures at or below 20 psi unless 
otherwise specified by the nozzle manufacturer.
 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the 
applicable restrictions and limitations and directions for use on all product labels involved in tank-mixing. Users must 
follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
Aerial Application: Apply in a minimum spray volume of 3 gallons per acre. For optimum spray coverage and 
distribution, use a minimum of 5 gallons per acre and a maximum pressure of 40 psi. Use a boom and nozzle 
configuration which will provide a uniform deposition pattern and coverage with low drift potential. Avoid overlaps to 
prevent potential crop injury. Do not apply near sensitive crops or sensitive plants growing near the treated area. Do 
not apply when wind speed is greater than 10 mph or when winds are moving toward sensitive crops or plants. To 
avoid drift hazards, applicator must follow the most restrictive labeling of the products used in a tank-mix. Refer to the 
appropriate tank-mix partner's label for further precautions and restrictions.
 
 
POST-DIRECTED APPLICATION 
This product in tank-mix combinations with Bromoxynil, 2,4-D or Dicamba may be applied post-directed to Field Corn. 
Use drop nozzles and appropriate spacing to direct spray below the Corn whorl and upper leaves. The top of the 
target weed canopy must be sufficiently below the whorl and upper leaves of the crop to permit this application and 
provide adequate spray coverage. The height differential required between the crop and weed canopy will depend on 
the specific equipment used. Apply before tassel emergence. For further precautions and additional restrictions, refer 
to the appropriate tank-mix partner's label.

Page 22 of 71 
 
 
ADJUVANTS 
The adjuvant types listed below may be utilized with certain tank-mix combinations with this product. Consult the tank-
mix recommendations section for the appropriate adjuvant and rate. Use of non-recommended adjuvants or rates 
may result in severe leaf burn, crop stunting and/or stan d reduction. Use only adjuvants which are exempt from 
tolerance requirements under 40 CFR 180. 
 
Ammonium sulfate (spray grade) may be used as an alternative to urea ammonium nitrate (UAN) with certain tank-
mix combinations. 
 
Nonionic surfactants should contain at least 80% active ingredient (e.g., Surf-AC 820). 
 
Urea Ammonium Nitrate (UAN) is commonly referred to as 28, 30 or 32% N. 
 
DO NOT USE crop oil concentrate (COC) or any adjuvant containi ng vegetable or petroleum oils with any tank-
mixtures with this product as severe leaf burn, crop stunting and/or stand reduction may occur. 
 
SPRAYER CLEANUP 
Refer to each tank-mix partner's label and the “SPRAYER CLEANUP” section of this label for specific instructions on 
cleaning spray equipment. Special attention should be given to the required cleanup procedures for 2,4-D, Dicamba 
and Atrazine + Dicamba. 
 
USE PRECAUTIONS 
Stress is any condition or combination of conditions which im pairs normal crop growth. Weather, disease, insect 
damage, fertility or other factors may caus e stress. Applications made before or after the Corn is under stress from 
these factors or from periods of prolonged cool, wet and cloudy weather or widely fluctuating day and nighttime 
temperatures, may result in temporary leaf burn, yellowing and/or stunting of the crop. Recovery from damage is 
generally rapid with no lasting effects on new growth. Under extreme stress, stand reductions may occur. 
 
USE RESTRICTIONS
 
• Do not use on Corn grown for seed, Popcorn or White Corn. (See separate directions on this label for application 
to Sweet Corn.) 
• Do not apply more than 5.3 ounces of THIS PRODUCT (0.25 lb. a.i) per acre per use season. 
• Do not apply when Field Corn is under stress (see “Use Precaution” above). 
• Do not use aerial applications if sensitive crops or plants are growing in the vicinity of the area to be treated. 
• Do not allow spray drift onto sensitive crops or plants. 
• Do not use on sand, loamy sand or sandy loam soils that have less than 0.5% organic matter. 
• Do not use on sand or loamy sand soils in Idaho, Oregon or Washington or crop injury may occur. 
 
Feeding Restrictions: Field Corn treated with THIS PRODUCT may be grazed or harvested for silage or grain 60 
days after treatment. Follow the most restrictive pre-harvest interval on the labels of the products used in the tank-
mixtures.

Page 23 of 71 
 
 
 
TANK-MIX COMBINATIONS 
The tank-mixtures of this product listed below can be ut ilized for control of certain annual broadleaf weeds. 
 
FIELD CORN - POST-EMERGENCE BROADCAST APPLICATIONS 
Product Rate/Ac. Use Directions and Remarks* 
 
THIS PRODUCT 
+ 
Atrazine 
2 ozs. 
+ 
Labeled rate 
Apply as a broadcast spray during the interval from Corn emergence until 
Corn is 12 inches tall. A nonionic surfactant (e.g., Surf-AC 820) (1 qt./100 gals. 
of spray solution) may be added to improve weed control. Atrazine is a restricted 
use herbicide. Follow all state and federal label directions and restrictions 
pertaining to Atrazine applications. 
 
THIS PRODUCT 
+ 
Bentazon 
 
2 ozs. 
+ 
Labeled rate 
Apply as a broadcast spray after Corn emergence but before Corn exceeds 
30 inches in height and the crop canopy closes the row. Adjuvants such 
as urea ammonium nitrate (UAN) (0.5 to 1 gal./Ac.), ammonium sulfate (17 
lbs./100 gals. of spray solution), or nonionic surfactant (e.g., Surf-AC 820) (1 
qt./100 gals. of spray solution) may improve weed control. 
 
THIS PRODUCT 
+ 
 
Bromoxynil 
 
1.6 to 2 ozs. 
+ 
 Labeled rate 
Apply as a broadcast spray when Corn is in the fourth true leaf stage or 
later but before the crop canopy closes the row. DO NOT USE ADJU- 
VANTS. Occasional temporary Corn leaf burn may occur and is similar 
to that observed from liquid fertilizers. Recovery is generally rapid with 
no lasting effect. To reduce potential for crop damage, application should 
be made to dry Corn foliage when weather conditions are not extreme.
 
THIS PRODUCT 
+ 
Bromoxynil + Atrazine 
(Premix) 
1.6 to 2 ozs. 
+ 
Labeled rate 
Apply as a broadcast spray during the interval from Corn emergence until 
Corn is 12 inches tall. DO NOT USE ADJUVANTS. Occasional 
temporary Corn leaf burn may occur and is similar to that observed from 
liquid fertilizers. Recovery is genera lly rapid with no lasting effect. To 
reduce potential for crop damage, application should be made to dry 
Corn foliaqe when weather conditions are not extreme.
 
THIS PRODUCT 
+ 
2,4-D Amine 
or 
2,4-D Ester 
2 ozs. 
+ 
Labeled rate 
Apply as a broadcast spray during the interval from Corn emergence until Corn 
is 8 inches tall. Apply only to varieties known to be tolerant to 2,4-D. DO NOT 
USE ADJUVANTS. 2,4-D may cause injury to nearby sensitive crops. 2,4-D 
applications may result in brittle Corn stalks and winds or cultivation may cause 
stalk breakage. To reduce damage, de lay cultivation 8 to 10 days after 
application. 
 
THIS PRODUCT 
+ 
Dicamba DGA 
or 
Dicamba DMA 
 
2 ozs. 
+ 
Labeled rate 
Apply as a broadcast spray during the interval from Corn emergence 
through the 5-leaf stage or when Corn is 8 inches tall, whichever occurs 
first. For Dicamba applications to Corn greater than 8 inches in height, 
consult the Dicamba label for use rates and restrictions. If growing 
conditions are dry and plants are stressed, addition of a nonionic 
surfactant (e.g., Surf-AC 820) (1 qt./100 gals. of spray solution) may 
improve weed control. For Corn grown on coarse textured soils, apply 
Dicamba DGA or Dicamba DMA at labeled rate regardless of application 
method. Application may cause injury to nearby sensitive crops or plants. 
Application may result in temporary leaning of Corn plants. Delay 
cultivation until plants return to normal growth patterns to avoid stalk 
breakage.
 
THIS PRODUCT 
+ 
Atrazine + Dicamba 
(Premix) 
2 ozs. 
+ 
Labeled rate 
Apply as a broadcast spray during the interval from Corn emergence 
through the five-leaf stage or when Corn is 8 inches tall, whichever occurs 
first. 
DO NOT USE ADJUVANTS. Application may cause injury to nearby 
sensitive crops or plants. Application may result in temporary leaning of 
Corn plants. Delay cultivation until plants return to normal growth patterns 
to avoid stalk breakage. Follow all state and federal label directions and 
restrictions pertaining to Atrazine.

Page 24 of 71 
 
THIS PRODUCT 
+ 
Imazethapyr 
2 ozs. 
+ 
Labeled rate 
Use only on designated IMl-Corn hybrids (hybrids which are resistant / 
tolerant to Pursuit). Apply the labeled rate of Imazethapy if grasses are 
present or broadleaf weeds are near the maximum heights shown. Apply 
in combination with a nonionic surfactant (e.g., Surf-AC 820) (1 qt./100 
gals. of spray solution) and urea ammonium nitrate (UAN) (1 to 2 
qts./Ac.).
 
THIS PRODUCT 
+ 
Flumiclorac 
3 ozs. 
+ 
Labeled rate 
Apply as a broadcast spray to Field Corn from 2-leaf through 10-leaf 
(visible leaf collars) stage. Adjuvants such as nonionic surfactant 
(e.g., 
Surf-AC 820) (0.25% v/v), urea ammonium nitrate ( UAN) (2% v/v) or 
ammonium sulfate (2.5 lbs./Ac.) may increase weed control. 
*Consult the appropriate tank-mix partner's label for addition al directions or restrictions. The most restrictive labeling 
applies to tank-mixes with THIS PRODUCT. 
 
 
FIELD CORN - POST-DIRECTED APPLICATIONS 
Product Rate/Ac. Use Directions and Remarks* 
THIS PRODUCT 
+ 
 
Bromoxynil 
2 to 3 ozs. 
+ 
Labeled rate 
Apply as a directed spray with drop nozzles before tassel emergence. 
DO NOT USE ADJUVANTS. Occasional temporary Corn leaf burn may 
occur and is similar to that observed from liquid fertilizers. Recovery is 
generally rapid with no lasting effect. To reduce potential for crop damage, 
application should be made to dry Corn foliage when weather conditions 
are not extreme.
 
THIS PRODUCT 
+ 
2,4-D Amine 
or 
2,4-D LVE 
2 to 3 ozs. 
+ 
Labeled rate 
For Corn greater than 8 inches tall, apply as a directed spray with drop 
nozzles before tassel emergence. Apply only to varieties known to be 
tolerant to 2,4-D. DO NOT USE ADJUVANTS. 2,4-D may cause injury to 
nearby sensitive crops. 2,4-D applications may result in brittle Corn stalks, 
and winds or cultivation may cause stalk breakage. To reduce damage, 
delay cultivation 8 to 10 days after application. 
 
THIS PRODUCT 
+ 
Dicamba DGA 
or 
Dicamba DMA '· 
 
2 to 3 ozs. 
+ 
Labeled rate 
For Corn 8 to 36 inches tall, apply as a directed spray with drop nozzles. 
Application may be made up to 15 days prior to Corn tasseling. If growing 
conditions ate dry and plants are stressed, addition of a nonionic 
surfactant (e.g., Surf-AC 820) (1 qt./100 gals. of spray solution) may 
improve weed control. For Corn grown on coarse textured soils, apply 
Dicamba DGA or Dicamba DMA at labeled rate. regardless of application 
method. Application may cause injury to nearby sensitive crops or plants. 
Application may result in temporary leaning of Corn plants. Delay 
cultivation until plants return to normal growth patterns to avoid stalk 
breakage.
 
 *Consult the appropriate tank-mix partner's label for additi onal directions or restrictions. The most restrictive labeling 
applies to tank-mixes with THIS PRODUCT.

Page 25 of 71 
 
WEEDS CONTROLLED - POST-EMERGENCE BROADCAST APPLICATION 
The following tank-mixtures with THIS PRODUCT will control the following annual weeds up to the maximum weed 
heights listed: 
 
 
 Common Name 
THIS PRODUCT + 
Atrazine Dicamba 
DGA or 
DMA 
Bentazon Bromoxynil 
or 
Bromoxynil 
+ Atrazine 
2,4-D Atrazine + 
Dicamba 
(Premix) 
Imazethapyr Flumiclorac 
MAXIMUM WEED HEIGHT (INCHES)* 
Amaranth, Palmer 4** 4 2** 4** 4 4 8*** 4 
Buckwheat, Wild 3 3 3 3 2 3 2 4 
Buffalobur 4 4 - 4 - 4 1 - 
Burcucumber - 4 - 4 2 4 - - 
Carpetweed 2 2 2 2 2 2 - 3 
Cocklebur, Common 8 8 8 8 8 8 8*** 3 
Eclipta 3 3 3 3 3 3 - - 
Henbit 3 3 2 2 2 4 3 - 
Horseweed/ Marestail 3 4 1 1 3 6 - 3 
Jimsonweed 5 5 6 5 5 5 5 3 
Knotweed 6 6 6 4 2 6 4 - 
Kochia 2** 2 1** 2** 2** 2 2 - 
Ladysthumb 6 6 6 6 4 6 4 4 
Lambsquarters, 
Common 6** 6 1 6 6 6 4 4 
Lettuce, Prickly 4 4 - 3 4 5 - - 
Mallow, Venice 2 2 2 2 2 2 2 - 
Morningglory, Entire leaf 3 3 1 3 3 3 2 - 
Morningglory, Ivvleaf 3 3 1 3 3 3 2 - 
Morningglory, Pitted 3 3 1 3 3 3 2 - 
Morningglory, Tall 3 3 1 3 3 3 2 - 
Mustard, Tansy 4 4 4 4 4 4 4 - 
Mustard, Wild 4 4 4 4 4 4 4 - 
Nightshade, Black 6 6 - 6 1 6 3 
Nightshade, Eastern 
black 6 6 - 6 1 6 3 - 
Pigweed, Redroot 6** 6 2** 6** 6 6 8*** 4 
Pigweed, Smooth 6** 6 2** 6** 6 6 8*** 4 
Poorjoe 3 3 3 3 3 3 3 - 
Purslane, Common 1 3 - - - 4 1 - 
Pusley, Florida 3 3 3 3 3 3 3 
Ragweed, Common 5 5 3 5 5 6 3 3 
Ragweed, Giant 4 5 2 4 3 6 4 - 
Sicklepod 3 3 3 3 3 3 3 - 
Sida, Prickly 1 1 3 1 1 2 1 2 
Smartweed, Pennsylvania 6 6 6 6 4 6 4 4 
Sunflower, Common 6 6 6 6 6 6 5 - 
Thistle, Russian 1 3 - 3 1 3 1 -

Page 26 of 71 
 
Velvetleaf 6** 6 6 6 4 6 5 6 
Waterhemp, spp. 5** 5 2** 5** 5 5 4*** 4 
 * When weeds are approaching the maximum height listed or found in high densities, use the higher specified rate of this 
product and the selected tank-mix partners. 
 **These treatments will not control triazine resistant biotypes. 
 ***These treatments will not control ALS resistant biotypes. 
 
 
WEEDS CONTROLLED – POST-DIRECTED APPLICATION 
 
The following tank-mixtures with THIS PRODUCT will control the following annual weeds up to the maximum weed 
heights listed: 
 
 
 
 
 
 Common Name 
THIS PRODUCT + 
2,4-D Dicamba Bromoxynil 
MAXIMUM WEED HEIGHT (INCHES)* 
Amaranth, Palmer 12 12 6 
Cocklebur, Common 12 12 12 
Jimsonweed 12 10 10 
Ladysthumb 6 8 6 
Lambsquarters, Common 12 12 10 
Morningglory, Entire leaf 18 18 6 
Morningglory, Ivyleaf 18 18 6 
Morningglory, Pitted 18 18 6 
Morningglory, Tall 18 18 6 
Nightshade, Black 10 8 8 
Nightshade, Eastern black 10 8 8 
Pigweed, Redroot 12 12 6 
Pigweed, Smooth 12 12 6 
Ragweed, Common 8 8 8 
Ragweed, Giant 12 12 8 
Smartweed, Pennsylvania 6 8 6 
Sunflower, Common 12 12 12 
Velvetleaf 10 8 8 
Waterhemp, Tall 12 12 6 
 * When weeds are approaching the maximum height listed or found in high densities, use the higher specified rate of this 
product and the selected tank-mix partners.

Page 27 of 71 
 
PERENNIAL WEED SUPPRESSION 
The following tank-mixtures with this product will provide top growth burndown and in season suppression of the 
following perennial weeds, however, regrowth may occu r. For the best performance on these weeds, use the 
maximum allowable rates of this product and the tank-mix partner’s labeled rates for these tank-mixtures. 
 
 THIS PRODUCT + Perennial Weeds Suppressed 
Bromoxynil or Bromoxynil + Atrazine Thistle (Canada) 
2,4-D LVE 
 
Bindweed (field); Dandelion (common); Dock (curly); 
Smartweed (swamp); Thistle (Canada) 
Dicamba Bindweed (field); Dandelion (common); Dock (curly); 
Smartweed (swamp); Thistle (Canada) 
Dicamba + Atrazine (premix) Bindweed (field); Dandelion (common); Dock (curly); 
Smartweed (swamp); Thistle (Canada) 
Imazethapyr Thistle (Canada) 
 
PRE-PLANT AND PRE-EMERGENCE APPLICATIONS 
(Illinois, Indiana, Iowa, Kansas, Kentucky, Michigan, Minnesota, Missouri, Nebraska, 
Ohio, South Dakota and Wisconsin) 
THIS PRODUCT may be used for additional residual control of certain broadleaf weed species in Corn when applied 
as a tank-mix combination with both grass and broadleaf herbicides registered and labeled for use in Field Corn. 
THIS PRODUCT can be tank-mixed with specified rates of the following herbicides: 
 
Acetochlor 
Atrazine 
Dicamba 
Dicamba + Atrazine (premix) 
Dimethenamid 
Dimethenamid + Atrazine (premix) 
Imazethapyr 
Linuron 
Metolachlor 
Pendimethalin 
Simazine 
S-metolachlor 
 
Application: 
THIS PRODUCT may be applied pre-plant to Field Corn without incorporation up to 30 days prior to planting or pre-
emergence. Applications may be made by either ground or aerial equipment. For tank-mixes, follow the most 
restrictive application methods of all products used. 
 
FIELD CORN – PRE-PLANT AND PRE-EMERGENCE APPLICATIONS 
States Application Timing THIS PRODUCT 
(ozs./Ac.) 
Iowa, Kansas, Missouri, Nebraska, South Dakota Pre-plant (0 to 30 days) 
2 to 5.3 
(0.09 to 0.25 lb. a.i.) Pre-emergence 
Illinois, Indiana, Kentucky, Michigan, Minnesota, Ohio 
Wisconsin 
Pre-plant (10 to 30 days) 2 to 5.3 
(0.09 to 0.25 lb. a.i.) 
Pre-plant (0 to 9 days) 
2 to 4 
(0.09 to 0.19 lb. a.i.) Pre-emergence 
Apply as a broadcast spray prior to Corn emergence from the soil. 
Do not apply THIS PRODUCT on coarse textured soils with less than 1.5% organic matter. 
Do not apply more than 4 ozs. of THIS PRODUCT (0.19 lb. a.i.) per acre on soils with less than 2.0% organic 
matter. 
For heavy weed infestations and/or early pre-plant applic ations, use the higher listed rates of THIS PRODUCT. 
Consult the label of herbicide tank-mix partners to determine proper use rates for the other product(s). 
 
Weeds Controlled: 
THIS PRODUCT will aid in the resid ual pre-emergence control of the fo llowing weed species when tank-mixed 
with other registered grass and/or broadleaf Corn herbicides:

Page 28 of 71 
 
 
Horseweed/Marestail 
Ladysthumb 
Lambsquarters, Common 
Pigweed spp. 
Ragweed, Common 
Smartweed, Pennsylvania 
Sunflower 
Velvetleaf 
Waterhemp, Tall 
*For control of emerged weeds, refer to the "FIELD CORN - BURNDOWN WEED CONTROL” section of this label. 
 
Use Precautions: 
• Plant Corn seed at a minimum of 1.5 inches deep. 
• THIS PRODUCT may only be used in hybrid seed Corn production fields if both inbred parents are known to be 
tolerant to Metribuzin. 
• Reduced weed control may result if THIS PRODUCT is used on muck soils. 
• Observe all precautions and limitations on labeling of all products used in tank-mixes. 
 
Use Restrictions: 
• Do not apply more than 5.3 ounces of THIS PRODUCT (0.25 lb. a.i.) per acre per growing season. 
• Do not apply on soils having pH 7.0 or greater. 
 
Feeding Restrictions: Corn treated with THIS PRODUCT may be harvested for silage or grain 60 days after 
treatment. For tank-mixes, follow the most restrictive pre-harvest interval of all products used. 
 
FIELD CORN - BURNDOWN WEED CONTROL 
THIS PRODUCT can be used as part of a herbicide program for burndown of ex isting vegetation prior to crop emergence 
in conservation tillage systems. THIS PRODUCT may be tank-mixed with 2,4-D low volatile ester, Paraquat or Glyphosate 
for control of emerged weeds prior to emergence of Field Corn emergence. Burndown tank-mixes with THIS PRODUCT 
can be applied before planting or prior to crop emergence in the following areas: Illinois, Indiana, Iowa, Kansas, Kentucky, 
Michigan, Minnesota, Missouri, Nebraska, Ohio, South Dakota and Wisconsin. 
 
Application: 
THIS PRODUCT may be applied up to 30 days prior to planting or pre-emergence. Apply only by ground equipment when 
THIS PRODUCT is used for burndown of existing vegetation in conservation tillage systems. THIS PRODUCT and tank-mix 
partner burndown rates are listed in the following three tables. 
 
FIELD CORN - BURNDOWN RATES OF THIS PRODUCT 
Area Application Timing THIS PRODUCT (Oz./Ac.) 
Iowa, Kansas, Missouri, Nebraska, 
South Dakota 
Pre-plant (0 to 30 days) 2 to 5.3 
(0.09 to 0.25 lb. a.i.) Pre-emergence 
Illinois, Indiana, Kentucky, Michigan, 
Minnesota, Ohio, Wisconsin 
Pre-plant (10 to 30 days) 2 to 5.3 
(0.09 to 0.25 lb. a.i.) 
Pre-plant (0 to 9 days) 2 to 4 
(0.09 to 0.19 lb. a.i.) Pre-emergence

Page 29 of 71 
 
 
FIELD CORN – BURNDOWN RATES OF THIS PRODUCT PLUS TANK-MIX PARTNER 
PRODUCT Rate/Ac. Use Directions and Remarks 
THIS PRODUCT 
+ 
2,4-D LVE 
2 to 5.3 ozs.* 
+ 
Labeled rate 
Apply at least 7 days pre-plant or at least 3 days after planting but before 
Corn emergence. 
 
THIS PRODUCT 
+ 
Paraquat 
 
2 to 5.3 ozs.* 
+ 
Labeled rate 
Must be applied prior to crop emergence. See Paraquat label for amount 
to use in relation to weed height. Apply in 20 to 60 gallons of water per 
acre. Include either nonionic surfactant (e.g., Surf-AC 820) at 1 qt./100 gals 
(0.25% v/v) or crop oil concentrate (COC) (e.g., Peptoil ®) at 1 gal./100 
gals. (1% v/v) of spray solution. 
THIS PRODUCT 
+ 
Paraquat 
+ 
2,4-D LVE 
2 to 5.3 ozs.* 
+ 
Labeled rate. 
+ 
Labeled rate 
For this tank-mix, follow the “Use Directions and Remarks” above for 
“THIS PRODUCT + 2,4-D LVE” and “THIS PRODUCT + Paraquat” paying 
special attention to crop planting restrictions with 2,4-D LVE. Include either 
nonionic surfactant (e.g., Surf-AC® 820) or crop oil concentrate (COC) (e.g., 
Peptoil) in this tank-mix. 
THIS PRODUCT 
+ 
Glyphosate 
 
2 to 5.3 ozs.* 
+ 
Labeled rate 
Must be applied prior to crop emergence. Use the higher specified 
rates as weeds approach the maximum weed heights listed in the 
"Weeds Controlled By Burndown Rates of This Product Plus Tank-Mix 
Partner" table below. Apply in 10 to 20 gallons of water per acre. With 
Glyphosate, include nonionic surfactant (e.g., Surf-AC 820) at 2 qts./100 
gals. (0.5% v/v) and ammonium sulfate (spray grade) at 17 lbs./100 
gals. of spray solution. Any glyphosate formulation registered and 
labeled for use in Field corn may be tank-mixed with THIS PRODUCT.
 
THIS PRODUCT 
+ 
Glyphosate 
+ 
2,4-D LVE 
2 to 5.3 ozs.* 
+ 
Labeled rate 
+ 
Labeled rate 
For this tank-mix follow the “Use Directions and Remarks” above for 
“THIS PRODUCT + 2,4-D LVE” and “THIS PRODUCT + 
Imitator/Roundup or Touchdown” , paying special attention to planting 
restrictions with 2,4-D LVE. Use the adjuvant directions under the “THIS 
PRODUCT + Glyphosate” tank-mix. Do not use crop oil concentrate 
(COC).
 
* If applied to Field Corn grown in Illinois, Indiana, Kent ucky, Michigan, Minnesota, Ohio and Wisconsin, refer to 
the “FIELD CORN - BURNDOWN RATES OF THIS PRODUCT” table for appropriate rate of THIS PRODUCT 
based on application timing. 
 
Weeds Controlled: 
THIS PRODUCT in tank-mixtures with the above herbicides will provide burndown control of the weeds listed below. 
 
WEEDS CONTROLLED BY BURNDOWN RATES OF THIS PRODUCT PLUS TANK-MIX PARTNER 
 
 
Weeds 
Controlled 
 THIS PRODUCT + 
2,4-D 
LVE 
 
 
Sethoxydim 
+ 
2,4-D 
LVE 
 
Clethodim 
+ 
2,4-D 
LVE 
 
Fluazifop-P-
butyl + 
Fenoxaprop_
P-ethyl 
(premix) 
+ 
2,4-D 
LVE 
 
Glyphosate 
 
Glyphosate 
+ 
2,4-D 
LVE 
 
Paraquat 
 
Paraquat 
+ 
2,4-D 
LVE 
 
2,4-DB 
DMA 
ANNUAL GRASSES MAXIMUM BURNDOWN HEIGHT (INCHES) 
Barley 
 
 
 
 
 
Does not 
- - - 8 4 to 6 
 
 
 
 
Does 
not 
Barnyardgrass 2 to 3 3 to 4 - 6 4 to 6 
Crabgrass spp. 2 to 3 - - 6 4 to 6 
Foxtail spp. 2 to 3 3 to 4 2 to 6 8 4 to 6 
Johnsongrass, 
seedlinq 2 to 3 - - 8 4 to 6

Page 30 of 71 
 
Panicum, fall control 
these 
species 
2 to 3 3 2 to 6 6 4 to 6 control 
these 
species Sandbur, field - - - 8 4 to 6 
Shattercane 2 to 3 - - 8 4 to 6 
Wheat, Volunteer - - - 6 4 to 6 
Witchgrass 2 to 3 - - 6 4 to 6 
 BROADLEAVES MAXIMUM BURNDOWN HEIGHT (INCHES) 
Buffalobur - 6 6 4 to 6 4 to 6 - 
Chickweed, 
Common 6 6 8 4 to 6 4 to 6 2 
Cocklebur, 
Common 6 6 8 4 to 6 4 to 6 6 
Dandelion, 
Common 
6 diaa 2 diab 6 dia a 4 diad 6 diaa 2 dia 
Henbit 4 4 4 4 to 6 4 to 6 - 
Horseweed/ 
Marestail 
6
a,c 4b 6 3 6a 2 c 
Jimsonweed 6 6 6 4 to 6 4 to 6 2 
Kochia* 4
a,c 4 4 4 4 - 
Ladysthumb 6 6 8 4 to 6 4 to 6 3 
Lambsquarters, 
Common 
6 6 8 4 to 6 4 to 6 2 
Lettuce, Prickly 6 4 6 4 to 6 4 to 6 2 
Mallow, Venice 6 6 6 4 to 6 4 to 6 - 
Morningglory spp. 6 2 4 2 4 4 
Mustard spp. 6 6 8 4 to 6 4 to 6 2 
Pennycress, Field 6 6 6 4 to 6 4 to 6 2 
Pigweed, spp. 
(Annual) 6 6 8 4 to 6 4 to 6 
3 
Ragweed, Common 6 6b 8 4 to 6 4 to 6 2 
Ragweed, Giant 6
a,c 4b 6 4 6 2 
Shepherdspurse 6 6 6 4 to 6 4 to 6 - 
Sida, Prickly 6 4 4 4 4 1 
Smartweed, 
Pennsylvania 
6 6 8 4 to 6 4 to 6 3 
Sunflower, Common 6 6 6 4 to 6 4 to 6 4 
Thistle, Russian 4a,c 2 to 4b,c 6 4 4 to 6 3c 
Velvetleaf 6 6 8 4 to 6 4 to 6 3 
Waterhemp spp. 6 6 8 4 to 6 4 to 6 3 
aUse 2,4-D LVE a.i. at 0.5 lb. per acre. 
bUse Glyphosate at the minimum labeled rate. 
cUse THIS PRODUCT at 4 ozs./Ac. (0.19 lb. a.i./Ac.) for optimum control. 
dSuppression only. 
*Does not control triazine resistant biotypes. 
 
 
Use Precautions: 
• Plant Corn seed in a minimum of 1.5 inches deep. 
• THIS PRODUCT may only be used in hybrid seed Corn production fields if both inbred parents are known to be tolerant 
to THIS PRODUCT. 
• Observe all precautions and limitations on the labeling of all products us ed in tank-mixtures. Refer to the “USE 
INFORMATION” section of this label for additional information, precautions and limitations.

Page 31 of 71 
 
 
Use Restrictions: 
• Do not apply these treatments after crop emergence. 
• Do not apply on coarse textured soils with less than 1.5% organic matter. 
• Do not apply more than 4 ounces of THIS PRODUCT (0.19 lb. a.i.) per acre on soils with less than 2% organic matter. 
• Do not apply on soils having pH 7.0 or greater. 
• Do not apply more than 5.3 ounces of THIS PRODUCT (0.25 lb. a.i.) per acre per growing season. 
 
Feeding Restrictions: Corn treated with THIS PRODUCT may be harvested for silage or grain 60 days after treatment. Do 
not feed hay, forage, fodder or graze 2,4-D treated vegetation. Follow the most restrictive pre-harvest interval of all products 
used in a tank-mixture. 
 
RESIDUAL WEED CONTROL 
Burndown programs with THIS PRODUCT can be used as part of a full season weed control program when: 1) applied 
as a tank-mixture with residual herbicides or 2) followed with a post-emergence weed control program, which is 
registered for use on that crop. 
For residual control, burndown programs with THIS PRODUCT may include tank-mixes with the following herbicides 
or combination of herbicide(s): 
 
Acetochlor 
Acetochlor + Atrazine (premix) 
Atrazine 
Dicamba 
Dicamba + Atrazine (premix) 
Dimethenamid 
Dimethenamid + Atrazine (premix) 
Flumetsulam 
Imazethapyr 
Imazethapyr + Pendimethalin (premix)
 
Linuron 
Metolachlor 
Pendimethalin 
Simazine 
S-Metolachlor 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the 
applicable restrictions and limitations and directions for use on all product labels involved in tank-mixing. Users must 
follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
CORN (SWEET) 
 
PRE-PLANT AND PRE-EMERGENCE APPLICATIONS 
(Illinois, Indiana, Iowa, Kansas, Kentucky, Michigan, Minnesota, Missouri, Nebraska, Ohio, 
South Dakota and Wisconsin) 
THIS PRODUCT may be used for additional residual weed control of certain broadleaf weed species when applied 
in combination with other broadleaf and/or grass herbicides as a tank-mixture with products containing one or more 
of the following herbicides: Atrazine, 2,4-D, Glyphosate, Linuron, Metolachlor, Metribuzin, Paraquat and 
Pendimethalin. All products used must be labeled for use on Sweet Corn. 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the 
applicable restrictions and limitations and directions for use on all product labels involved in tank-mixing. Users must 
follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
Application Methods and Timing: 
THIS PRODUCT can be applied pre-plant surface or pre-emergence as a broadcast or band application in water, 
fluid fertilizer or impregnated on dry fertilizer. Ground or aerial equipment may be used. See "USE INFORMATION" 
section of this label for directions. 
 
Application Rates: 
Refer to “SOIL TEXTURE” section of this label for definitions of so il texture grouping and other information that 
applies to all applications. Use the lowest listed rate of the rate range on soils with the lowest percent clay and 
organic matter for the group and progressively higher rate (up to maximum listed rate) for increased clay and organic 
matter content. The clay content is at least twice as im portant as organic matter when adjusting rates. Rates will 
vary based on local conditions.

Page 32 of 71 
 
 
 Soil Texture Group 
THIS PRODUCT (Ozs./Ac.) 
Organic Matter 
1.5 to 2.9% > 3% 
 ALL SAND SOILS DO NOT USE 
 COARSE 1.6 to 2.4 (0.08 to 0.11 lb. a.i.) 2.5 to 2.8 (0.12 to 0.13 lb. a.i.) 
 MEDIUM 3 to 3.3 (0.14 to 0.15 lb. a.i.) 3.2 to 3.7 (0.15 to 0.17 lb. a.i.) 
 FINE 3.6 to 4.0 (0.17 to 0.19 lb. a.i.) 3.6 to 4.4 (0.17 to 0.21 lb. a.i.) 
For early pre-plant application more than 9 days before plan ting and fields with at least 30% crop residue on the soil 
surface at application, the application rate may be increased to 1 oz./Ac. (0.05 lb. a.i./Ac.), but not to exceed 5.3 
ozs./Ac. (0.25 lb. a.i.) 
For band applications, use proportionately less per planted acre. See “DIRECTIONS FOR USE” section of this label. 
 
Sequential Applications: 
Sequential applications of all herbicides containing Metribuzin (the a.i. in THIS PRODUCT) are subject to a limitation 
of not more than 5.3 ounces of THIS PRODUCT (0.25 lb. a.i.) per acre of Corn per use season. There are no other 
specific restrictions on sequential applications due to the application of THIS PRODUCT. 
 
Weeds Controlled: 
 Refer to the “ PRE-PLANT AND PRE-EMERGENCE APPLICATION” under the “CORN (FIELD)” section of this label 
for list of weeds controlled by THIS PRODUCT when applied before weed emergence. Use recommended adjuvants 
when emerged weeds are present. Refer to the “FIELD CORN - BURNDOWN WEED CONTROL” section for list of 
weeds controlled and weed height restrictions. 
 
Use Precautions: 
• Plant Corn seed at a minimum of 1.5 inches deep. 
• THIS PRODUCT may only be used in hybrid seed production fields if both inbred parents are known to be tolerant to 
THIS PRODUCT. 
• Reduced residual weed control may result when used on organic soils. For this reason, residual weed control is 
not claimed on organic soils.
 
 
Use Restrictions: 
• Do not apply more than a total of 5.3 ounces of THIS PRODUCT (0.25 lb. a.i.) per acre per growing season. 
• Do not apply pre-plant or pre-emergence on soils having a pH 7.0 or greater. 
 
Feeding Restrictions: Grain, forage and processing waste may be fed to livestock if harvested at least 60 days after 
the last application of THIS PRODUCT. 
 
Sensitive Sweet Corn Hybrids: 
Make applications only to hybrids that have established tolerance to the 
application planned. 
 
 
GARBANZO BEAN (CHICKPEAS) 
(California, Idaho, Oregon and Washington) 
Special Conditions of Sale for Use on Garbanzo beans (Chickpeas): The following directions for use were 
developed under the direction of IR-4 (government minor crops use program). As such, the testing was done 
independently. 
 
Application: 
THIS PRODUCT may be used as a pre-emergence application for the suppression of certain broadleaf weeds in 
Garbanzo beans.

Page 33 of 71 
 
Crop THIS PRODUCT (Lb./Ac.) 
 
 Garbanzo beans 
0.3 to 0.5 (0.23 to 0.38 lb. a.i.) 
Apply specified dosage in a single pre-emergence application using 10 to 40 gallons of water per 
acre with ground spray equipment. Apply before or after planting but before crop emergence. 
Thorough incorporation, either by rainfall or by mechanical means, is essential for weed 
suppression. Under dry conditions, incorporate THIS PRODUCT into the top 1 to 2 inches of soil 
with spike harrows or similar shallow incorporation equipment, then cross harrow to ensure 
uniform soil incorporation. Where soil surface is moist at the time of application and rain follows 
before weed emergence, a broadcast application should provide adequate weed suppression. 
Use on coarse-textured soils, sandy soils or any soil with less than 1.5% organic matter will likely 
cause crop injury. 
Use the higher specified rate on fine textured soil s (high in clay or organic matter) and in fields 
with a history of high weed populations. 
 
Weeds Suppressed*: 
 
Chickweed, Common 
Dog Fennel (Mayweed) 
Field Pennycress 
Henbit 
Lambsquarters, Common 
Pigweed 
Shepherdspurse 
Wild Mustard 
*Suppression is a reduction in weed size and growth compared to a non-treated area in the same field. 
THIS PRODUCT used alone will not control triazine resistant weed species. 
 
Use Precautions: 
• This treatment may cause some chlorosis or minor necrosis. Because Garbanzo bean varieties may vary in their 
susceptibility to THIS PRODUCT, determine crop tolerance pr ior to adoption as a field scale practice to prevent 
possible injury. 
• Crop injury may result if crop is under stress conditions caused by cold weather, poor soil fertility, disease or 
insect damage. 
• Crop injury may result if application is followed by heavy rain. Avoid application of more than 0.5 inch of 
irrigation within 1 month after application of THIS PRODUCT or crop injury may occur. 
• Maintain continuous spray tank agitation to keep material in suspension. Avoid overlapping of spray swaths and 
shut off spray booms while turning, slowing or stopping or crop injury will occur. 
 
Use Restrictions: 
• Do not use on clay knobs or poorly covered subsoils. 
• Do not apply pre-emergence on shallow seedings less than 2 inches deep. 
• Do not graze or feed treated vines to livestock within 40 days after application. 
 
LENTILS AND PEAS 
(Idaho, Montana, North Dakota, Oregon and Washington) 
 
THIS PRODUCT may be used as a pre-emergence and post-emergence application for the suppression of 
certain broadleaf weeds in Lentils and Peas.
 
 
Pre-emergence Application: 
Make a single pre-emergence application of THIS PRODUCT at 4 to 8 ounces (0.19 to 0.38 lb. a.i.) per acre per 
crop year. Apply in 10 or more gallons of water per acre with ground spray equipment and 5 or more gallons of 
water per acre with aerial spray equipment. Apply THIS PRODUCT before or after planting. Thorough 
incorporation either by rainfall or by mechanical means, is essential for weed suppression. Under dry conditions, 
incorporate THIS PRODUCT into the top 1 to 2 inches of soil with spike harrows or similar shallow incorporation 
equipment, then cross harrow to ensure uniform soil incorp oration. Where soil surface is moist at the time of 
application and rain follows before weed emergence, a broadcast application should provide adequate weed 
suppression.

Page 34 of 71 
 
 
Use the higher specified rate on fine-textured soils (high in clay or organic matter) and in fields with a history of 
high weed populations. 
 
THIS PRODUCT may be applied pre- or post-plant incorporated as a tank-mix combination with Triallate. Follow 
the directions for use on both product labels. 
 
Post-emergence Application: 
One post-emergence application may be made per season. Use 2.6 to 5.3 ounces of THIS PRODUCT (0.12 to 
0.25 lb. a.i.) per acre on Lentils and Spring Peas. On Winter Peas, use 4 to 5.3 ounces of THIS PRODUCT (0.19 
to 0.25 lb. a.i.)per acre. For suppression of Dog fennel, use 5.3 ounces of THIS PRODUCT (0.25 lb. a.i.) per acre. 
Apply specified dosage in 20 or more gallons of water per acre with ground spray equipment or 5 or more gallons 
of water per acre with aerial spray equipment. Do not exceed 40 psi with ground spray equipment. Apply as a 
broadcast spray when weeds are small (less than 2 inches in height or diameter) and before crop is 6 inches tall.
 
 
Temporary chlorosis of the crop may occur. There is an added risk of crop injury if a post-emergence application 
is made following a previous pre-emergence or post-plant incorporated application of THIS PRODUCT. 
 
Do not apply over very moist soils or wet crop foliage. Do not apply post-emergence applications within 3 days 
after periods of cool, wet or cloudy weather or crop injury may occur. 
 
Do not apply within 24 hours of treatment with other pesticides. 
 
Weeds Suppressed*: 
 
Chickweed, Common** 
Corn Spurry 
Dog Fennel 
Field Pennycress 
Henbit** 
Lambsquarters
 
Pennsylvania Smartweed 
Pineapple weed 
Prostrate Knotweed
 
 Redroot Pigweed 
 Shepherdspurse**
 
 Wild Mustard 
 *Suppression is a reduction in weed size and growth compared to a non-treated area in the same field. 
**Pre-emergence application only. 
 
Use Precautions (All Applications): 
• This treatment may cause some chlorosis or minor necrosis. Because Lentil and Pea varieties may vary in their 
susceptibility to THIS PRODUCT, determining crop tole rance prior to adoption as a field scale practice is 
suggested to prevent, possible injury. 
For additional precautions, restrictions, limitations and sprayer cleanup information refer to the appropriate 
sections of this label. 
• Crop injury may result if crop is under stress due to cold weather, low fertility, disease or insect damage. Crop 
injury may also result if application is followed by heavy rain.
 
• Maintain continuous spray tank agitation to keep mate rial in suspension. Avoid overlapping and shut off spray 
booms while turning, slowing or stopping or crop injury will occur. 
 
Use Restrictions (All Applications): 
• Do not apply more than 10.6 ounces of THIS PRODUCT (0.5 lb. a.i.) per acre per year. 
• Do not use on coarse-textured soils, sandy soils or soils with less than 1.5% organic matter. 
• Do not apply to "Estin" Lentils. 
• Do not use on clay knobs or poorly covered subsoils. 
• Do not apply on shallow seedings less than 2 inches deep (pre-emergence only). 
• Do not apply within 50 days of harvest of Peas or within 75 days of harvest of Lentils. Do not graze or feed treated 
vines to livestock within 40 days after application. 
 
POTATOES 
THIS PRODUCT may be used in ground, aircraft or specified chemigation equipment as a pre-emergence and/or 
post-emergence application to Potatoes. Early maturing, smooth skinned, white and all red skinned varieties may 
be injured with post-emergence applications. The varieties Atlantic, Bellchip, Centennial, Chipbelle and Shepody 
are sensitive to THIS PRODUCT. Avoid post-emergence applications on these varieties. Pre-emergence 
applications on these varieties may cause crop injury under adverse weather conditions, on coarse soils, under 
high soil pH, with higher rates per acre and with mechanical incorporation.

Page 35 of 71 
 
 
Ground Application: THIS PRODUCT may be used with ground spray equipment applied as a pre-emergence 
and/or post-emergence application for control of the lis ted grass and broadleaf weeds in Potatoes. Apply as a 
uniform broadcast spray at 20 or more gallons per acre. 
 
Aerial Application: 
THIS PRODUCT may be applied in aerial spray equipment as a pre-emergence and/or post-
emergence application at 5 or more gallons per acre. 
 
Chemigation: 
THIS PRODUCT may be applied pre-emergence and/or early post-emergence to Potatoes using 
center pivot, solid set and lateral roll systems. Apply specified dosage in 0.25 to 0.75 inch of water per acre (0.25 
to 0.5 inch on sandy soil) as a continuous injection in self-propelled systems or apply in the last 15 to 30 minutes of 
the set in other systems. Be sure THIS PRODUCT has been flushed completely from the lines before shutting down 
the system.
 
 
BROADCAST APPLICATIONS 
Crop THIS PRODUCT (Lbs./Ac.) 
 Potatoes 0.3 to 1.3 (0.23 to 0.98 lb. a.i.) 
Pre-emergence: Apply specified dosage as a broadcast spray. Do not mechanically incorporate into soil. Use the 0.3 to 
0.6 lb./Ac. (0.23 to 0.45 lb. a.i./Ac.) to control Wild mustard (Brassica sp.) only. On sand soils or sensitive varieties, do not 
exceed 0.6 lb./Ac. (0.45 to 0.11 lb. a.i.). 
Potatoes (Except early maturing smooth skinned, red skinned, 
and other specified varieties.) 
0.3 to 0.6 (0.23 to 0.45 lb. a.i.) 
Post-Emergence: Apply specified dosage as a broadcast spray over the top of Potato plants . [Refer to the Potato “Use 
Precautions” and “Use Restrictions” sections below.] Use the rates of 0.3 to 0.6 lb./Ac. (0.23 to 0.45 lb. a.i./Ac.) to control 
Redroot pigweed and Common lambsquarters only. Apply the 0.6 lb ./Ac. (0.45 lb. a.i./Ac.) rate to control other weeds listed 
on this label. 
Split Applications: THIS PRODUCT may be applied once pre-emergence and once post-emergence as directed above. 
[Refer to “Special Precautions (Potatoes)”]. Do not exceed a total of 1.3 lb./Ac. (0.98 lb. a.i./Ac.) per season. 
Idaho, Oregon and Washington Only: Two post-emergence applications can be made as broadcast sprays over the top of 
Potato plants if THIS PRODUCT is applie d pre-emergence. Use 0.3 to 0.6 lb./Ac. (0.23 to 0.45 lb. a.i./Ac.) to control 
Lambsquarters and Redroot pigweed only. On coarse (sandy) soils with low organic matter, do not exceed 0.5 lb./Ac. (0.38 
lb. a.i./Ac.) per application. On medium and heavy soils only, use 0.6 lb./Ac. (0 .45 lb. a.i./Ac.) per application to control other 
weeds listed on this label and for suppression of Hairy nightshade. Make the first application early in the season while weeds 
are still small. Allow at least 14 days before the second application. Do not apply after June 30 if treated land is to be planted 
to crops other than Potatoes. 
 
Weeds Controlled: 
THIS PRODUCT applied to Potatoes according to label directions, will provide economic control of the following 
weeds. For optimum control, apply before weeds are 1 inch tall. (See “NOTE”.) 
 
Broadleaves 
Carpetweed, Common 1 
Cocklebur, Common 1,2 
Jimsonweed 1 
Kochia 3 
Lambsquarters, Common 1,2 
Mustard, Indian1 
Mustard, Tansy1 
Mustard, Tumble 1 
Mustard, Wild 1 
Pennycress, Field 1,2 
Pigweed, Redroot 1,2 
Pigweed, Smooth 1,2 
Ragweed, Common 1,2 
Shepherspurse 1 
Sicklepod1 
Smartweed, Pennsylvania 1,2 
Sunflower, Common 3 
Thistle, Russian 2 
 
 
Grasses 
Barnyardgrass 3 
Crabgrass, Large 1 
Crabgrass, Smooth 1 
 
Foxtail, Giant 1 
Foxtail, Green 1 
Foxtail, Yellow1 
Johnsongrass, Seedling1 
Panicum, Fall 1 
Signalgrass, Broadleaf 1 
1 Controlled with pre-emergence applications. 
2 Controlled with post-emergence applications. 
3 Requires two applications for control.

Page 36 of 71 
 
 
Hard-To-Control Weeds: Although THIS PRODUCT may not provide commercially acceptable control in every 
instance, it will suppress growth of the following weeds and reduce their competition with Potato plants. 
 
Broadleaves 
Kochia 
Nightshade, Hairy 
Purslane, Common 
Sunflower, Common 
Barnyardgrass 
Grasses 
Nutsedge, Yellow 
 
Note: Where triazine resistant weeds are present, THIS PRODUCT alone may not provide adequate control. 
 
Tank-Mixes: 
THIS PRODUCT may be tank-mixed with the following herbicides: Metolachlor, S-Metolachlor, EPTC, Pendimethalin 
and Rimsulfuron. In addition, three-way tank-mix combinations may be used for THIS PRODUCT plus Metolachlor, 
S-Metolachlor, EPTC, Pendimethalin and Rimsulfuron when applied pre-emergence. Refer to each product's label for 
precautionary statements, restrictions, application information and weeds controlled.
 
 
Metolachlor or S-Metolachlor- 
THIS PRODUCT may be applied in a tank-mix combination with Metolachlor or S-
Metolachlor as a pre-emergence broadcast application. Apply THIS PRODUCT at 0.5 to 1.3 pounds (0.98 lb. a.i.) per 
acre and Metolachlor or S-Metolachlor at labeled rates according to the respective labels for use of each product 
alone on Potatoes. 
 
EPTC - THIS PRODUCT may be tank-mixed with EPTC at rates and uses permitted on each product's label. 
 
Pendimethalin - THIS PRODUCT may be applied in tank-mix combination with Pendimethalin as a pre-emergence 
or early post-emergence broadcast application. As a pre-emergence mix, apply THIS PRODUCT at 0.6 to 1.3 pounds 
(0.45 to 0.98 lb. a.i.) per acre and Pendimethalin at labeled rates. As an early post-emergence spray, apply THIS 
PRODUCT at 0.3 to 0.6 pound (0.23 to 0.45 lb. a.i.) per acre and Pendimethalin at labeled rates before the crop is in 
the 6 inch growth stage. 
 
Rimsulfuron (except in the following counties in Colorado: Almosa, Conejos, Costillo, Rio Grande and 
Saguache) - 
THIS PRODUCT may be applied in tank-mix combination with Rimsulfuron as a pre-emergence and/or 
early post-emergence application for improved control on weeds such as Common Lambsquarters, Kochia and 
Russian thistle. As a pre-emergence mix, apply THIS PRODUCT at 0.3 to 0.75 pound (0.23 to 0.56 lb. a.i.) per acre 
and Rimsulfuron at labeled rates. As an early post-emergence spray, apply THIS PRODUCT at 0.3 to 0.6 pound (0.23 
to 0.45 lb. a.i.) per acre and Rimsulfuron at labeled rates. Use a nonionic surfactant (e.g., Surf-AC 820) at a rate of 
0.125% v/v (1 pt./100 gals. of water). Apply before the crop exceeds 14 inches in height. Post-emergence applications 
of Rimsulfuron treatments should be made prior to June 30. 
 
Use Precautions: 
• Post-emergence applications may cause some chlorosis or minor necrosis. These symptoms may be more severe 
if seed-piece decay is occurring or if growing conditions favor crop stress. 
• Post-emergence applications may be made only on russet or white skinned varieties that are not early maturing. 
• Potato varieties may vary in their response to herbicide applications. When using THIS PRODUCT for the first time 
on a particular variety, always determine crop tolerance before using on a field scale. 
• Certain Cereal varieties are sensitive to THIS PRODUCT (see “CEREALS (SPRING AND WINTER BARLEY, 
WINTER WHEAT)” section of this label for sensitive varieties) and should not be planted during the next growing 
season unless the following cultural practices occur: 
o Potato vines left in rows as a result of harvest must be uniformly distributed over the soil surface prior to 
plowing and, 
o Plow with a moldboard plow to a depth sufficient to mix the upper 8 inches of soil.

Page 37 of 71 
 
 
Use Restrictions: 
• Do not use THIS PRODUCT on Potatoes in Kern County, California. 
• Do not apply more than a total of 1.3 pounds of THIS PRODUCT (0.98 lb. a.i.) per acre in a single crop season 
regardless of the method of application. 
• Do not make post-emergence applications prior to rainfall or irrigation on recently cultivated Potatoes or within 3 
days after periods of cool, wet cloudy weather or injury may occur. 
• Do not apply THIS PRODUCT within 60 days of harvest. 
• Do not use air blast sprayer. 
• Do not apply to Sweet potatoes or Yams. 
• Do not plant sensitive crops such as Cole crops, Cucu rbits, Lettuce and Onions during the next growing season 
following application of THIS PRODUCT. 
 
SOYBEANS (EXCEPT CALIFORNIA) 
 
Tank-mix combinations with THIS PRODUCT may be used fo r pre-plant incorporated app lications, pre-emergence 
surface applications, Split-Shot application and Extended Split-Shot application. THIS PRODUCT may also be used as 
an overlay application following a pre-plant incorporated application of a grass herbicide and alone as a pre-emergence 
surface application. All thes e applications can be applied with ground equi pment and some can be applied with aerial 
spray equipment. In addition, THIS PRODUCT can be applied as a post-emergence directed spray to Soybeans in certain 
states. 
 
SPECIAL PRECAUTIONS: 
Injury to Soybeans may occur when THIS PRODUCT is used under the following conditions: 
1. When soils have a calcareous surfac e area or a pH of 7.5 or higher. 
2. Due to the sensitivity of certai n Soybean varieties, THIS PRODUCT s hould not be used on Altona, AP 55, AP 71, 
Asgrow 6520, Burlison, Coker 102, Coker 156, Dassel, GL 3202, Govan, Maple Amber, NB 3665, NKS 1884, Paloma 
350, Portage, Regal, Semmes, Terra-Vig 505, Terra-Vig 606, Tracy, Vansoy and Vinton 81. Consult your 
Manufacturer’s representative or your seed supplier for information on t he tolerance to THIS PRODUCT of newly 
released Soybean varieties prior to use of THIS PRODUCT. 
3. When applied in conjunction with soil-applied organic phosphate pesticides. 
4. Over application or boom overlapping may result in stand loss and soil residues. 
5. Uneven application or improper incorporation can decrease the level of weed control and/or increase the level of 
injury. 
6. When applied to any soil with less than 0.5% organic matter. 
7. Soil incorporation deeper than specified. 
8. When sprayers are not calibrated accurately. 
 
 
9. When heavy rains occur soon after application, especia lly in poorly drained areas where water may stand for 
several days. 
10. When Soybeans are planted less than 1.5 inches deep, particularly in pre-emergence application. 
 
Activation: A minimum amount of soil moisture is required to ac tivate THIS PRODUCT. In areas of low rainfall, pre-
emergence applications to dry soil should be followed with lig ht irrigation of 0.25 acre-inch of water. Do not apply heavy 
irrigation immediately after application. As with many surface-applied herbicides, weed control and crop tolerance may vary 
with rainfall and/or soil texture. 
 
Grazing and Feeding Treated Vines: Treated vines may be grazed or fed to livestock 40 days after application when THIS 
PRODUCT is applied alone or with Metolachlor, S-Metolachlor, Pendimethalin or Trifluralin. 
Do not use treated vines for feed or forage when THIS PRODUCT is applied with Ethalfluralin or Linuron plus Metolachlor 
or S-Metolachlor. 
 
Rate Ranges: Where a rate range is shown, use the lower listed rate on soils that are coarse-textured or low in organic 
matter. Use the higher listed rate on soils that are relatively fine-textured or high in organic matter.

Page 38 of 71 
 
 
Replanting: If replanting is necessary in fiel ds treated with THIS PRODUCT as dire cted on this label, the field may be 
replanted to Soybeans. When replanting, use a minimum of tillage. Do not apply a second treatment as injury to Soybeans 
may occur. 
 
WEEDS CONTROLLED BY THIS PRODUCT AND TANK-MIX COMBINATIONS OF THIS PRODUCT 
C = Control; S = Suppression or Erratic Control; P =Poor or No Control; 0 = No Information (Control may range from poor to 
excellent) 
1 = THIS PRODUCT Alone 5 = THIS PRODUCT plus Pendimethalin 
2 = THIS PRODUCT Split-Shot 6 = Extended Split-Shot 
3 = THIS PRODUCT plus Trifluralin 7 = THIS PRODUCT plus Ethalfluralin 
4 = THIS PRODUCT plus Metolachlor or S-Metolachlor 8 = THIS PRODUCT plus Linuron plus Metolachlor or 
 S-Metolachlor 
ANNUAL BROADLEAF WEEDS 1 2 3 4 5 6 7 8 
Black Nightshade (Solanum nigrum) P P P C P C P S 
Bristly Starbur (Acanthospermum hispidum) C C C C C C C C 
Buffalobur (Solanum rostratum) C C P P P C P 0 
Carpetweed (Mollugo verticillata) C C C C C C C C 
Cocklebur (Xanthium pensylvanicum) S C S S S C S S 
Copperleaf, Hophornbeam (Acalypha ostryaefolia) C C C C C C C C 
Florida Beggarweed (Desmodium tortuosum) C C C C C C C C 
Florida Pusley (Richardia scabra) C C C C C C C C 
Galinsoga (Galinsoga spp.) C C C C C C C C 
Horseweed/Marestail (Conyza canadensis) 0 0 0 0 0 0 0 0 
Jimsonweed (Datura stramonium) C C C C C C C S 
Knotweed (Polygonum spp.) C C C C C C C C 
Kochia (Kochia scoparia) C C C C C C C C 
Lambsquarters (Chenopodium spp.) C C C C C C C C 
Morningglory, lvyleaf (Ipomoea hederacea) P P S P P P P P 
Morningglory, Pitted (Ipomoea lacunosa) P P S P P P P P 
Morningglory, Smallflower (Jacquemontia tamnifolia) P P C P P P P P 
Morningglory, Tall (Ipomoea purpurea) P P S P P P P P 
Pigweeds (Amaranthus spp.) C C C C C C C C 
Prickly Sida/Teaweed (Sida spinosa) C C C C C C C C 
Purslane (Portulaca oleracea) C C C C C C C C 
Ragweed, Common (Ambrosia artemisiifolia) C C C C C C C C 
Redweed (Melochia corchorifolia) C C C C C C C C 
Russian Thistle (Salsofa kali) C C C C C C C C 
Sesbania (Sesbania spp.) C C C C C C C C 
Shepherdspurse (Capsella bursa-pastoris) C C C C C C C C 
Sicklepod (Cassia obtusifolia) C C S C S C S S 
Smartweeds (Polygonum spp.) C C C C C C C S 
Spotted Spurge (Euphorbia maculata) C C P C P C P 0 
Spurred Anoda (Anoda cristata) C C C C C C C 0 
Sunflower (Helianthus spp.) C C S S S C S P 
Velvetleaf (Abutilon theophrasti) C C C C C C C C

Page 39 of 71 
 
Venice Mallow (Hibiscus trionum) C C C C C C C C 
Wild Mustards (Brassica spp.) C C C C C C C C 
 ANNUAL GRASSES 
Barnyardgrass (Echinochloa crus-galli) S C C C C C C C 
Bluegrass (Poa annua) C C C C C C C C 
Broadleaf Signalgrass (Brachiaria platyphylla) C C C C C C C 0 
Browntop Millet (Panicum ramosum) C C C P C C 0 0 
Crabgrass (Digitaria spp.) C C C C C C C C 
Crowfootgrass (Dactyloctenium aegyptium) C C C C C C 0 0 
Cupgrass (Eriochloa gracilis) P C P P P C 0 0 
Foxtails (Setaria spp.) S C C C C C C C 
Goosegrass (Eleusine indica) C C C C C C C C 
Johnsongrass, Seedling (Sorghum halepense) C C C C C C C 0 
Junglerice (Echinochloa colonum) C C C C C C C 0 
Nutsedge, Yellow (Cyperus esculentus) P P P C P C P 0 
Panicum, Fall (Panicum dichotomiflorum) P C C C C C C C 
Panicum, Texas (Panicum texanum) P C C P C S C 0 
Red Rice (Oryza sativa) P C C C P C 0 0 
Sandbur (Cenchrus spp.) P C C P C S 0 0 
Shattercane (Sorghum bicolor) P C C P P P C 0 
Sorghum, Volunteer (Sorghum spp.) P C C P P P 0 P 
Sprangletop (Leptochloa spp.) P C C P P P 0 P 
Stinkgrass (Eragrostis spp.) P C C P P P 0 P 
Wheat, Volunteer (Triticum spp.) P P P P P P 0 P 
Witchgrass (Panicum capillare) P C C C C C C 0 
 
THIS PRODUCT ALONE 
Pre-emergence Application: The following rates of THIS PRODUCT may be applied pre-emergence to Soybeans 
through center pivot or lateral move sprinkler irrigati on systems that apply water in a uniform manner. Refer to 
"CHEMIGATION" section of this label for directions. 
THIS PRODUCT can be applied broadcast or banded. This application may be made during planting or as a separate 
operation after planting but before crop emergence. See "USE INFORMATION" section in the front of this label. 
Do not apply to sand soils, sandy loam or loamy sand soils containing less than 2% organic matter. Do not incorporate 
into soil or apply more than once per season. 
 
THIS PRODUCT (Lbs./Ac.) 
Soil Texture Organic Matter 
< 2% 2 to 4% > 4% 
Coarse Soils: Loamy sand, Sandy loam DO NOT USE*** 0.5 
(0.38 lb. a.i.) 
0.6 
(0.45 lb. a.i.) 
Medium Soils*: Loam, Silt loam, Silt, 
Sandy clay, Sandy clay loam 
0.5 to 0.6 
(0.38 to 0.45 lb. a.i.) 
0.6 to 0.8 
(0.45 to 0.6 lb. a.i.) 
0.8 to 1 
(0.6 to 0.75 lb. a.i.) 
Fine Soils: Silty clay, Silty clay loam**, 
Clay, Clay loam 
0.6 to 0.8 
(0.45 to 0.6 lb. a.i.) 
0.8 to 1 
(0.6 to 0.75 lb. a.i.) 
1 to 1.2 
(0.75 to 0.9 lb. a.i.) 
Mississippi Delta Only 1 
(0.75 lb. a.i.) 
1.2 
(0.9 lb. a.i.) 
1.3 
(0.98 lb. a.i.)

Page 40 of 71 
 
*For control of Lambsquarters, Redroot pigweed and Wild mustard and for suppression of Giant, Green and Yellow 
foxtails on alkaline (calcareous) soils in Minnesota, Nebraska, North Dakota and South Dakota only, apply this product 
at rates of 0.3 lb./Ac. (0.23 lb. a.i./Ac.) on medium soils and 0.3 to 0.5 lb./Ac. (0.23 to 0.38 lb. a.i.) on fine soils regardless 
of soil organic matter percentage (use 0.5 lb. (0.38 lb. a.i ./Ac.) only where soil pH is less than 7.5 and weed pressure 
is heavy). The 0.3 lb./Ac. of this product (0.23 lb. a.i./Ac. ) alone can be applied regardless of soil pH. For control of 
other weeds listed on this label, use this product at full rates specified above, but note that crop injury may occur on 
soils having a calcareous surface area or a pH of 7.5 or higher. 
**Silty clay loam soils are transitional soils and may be classified as medium textured soils in some regions of the U.S. 
***Refer to the appropriate section of this label for use of this product on Soybeans in coarse soils with 0.5% or more 
organic matter in certain states. 
 
THIS PRODUCT IN TANK-MIXTURE 
 
SPLIT-SHOT APPLICATION 
A pre-plant incorporated application of THIS PRODUCT tank-mixed with either Ethalfluralin, Metolachlor, S-
metolachlor, Pendimethalin or Trifluralin and followed by a pre-emergence surface application of THIS PRODUCT 
alone after planting but prior to Soybean emergence will control more broadleaf and grass weeds in Soybeans than 
when either herbicide is used alone. 
Refer to the tank-mix partner labels and to appropriate sections of this label for directions on soil preparation, herbicide 
application, incorporation techniques, herbicide rates, weed species controlled and restrictions for using tank-mix 
combinations of THIS PRODUCT. Carefully observe the "Special Precautions" sections concerning the use of THIS 
PRODUCT in tank-mix combinations on Soybeans. 
 
When a split-shot applicati on of THIS PRODUCT with 
Ethalfluralin, Pendimethalin or Trifluralin is used , the pre-plant 
incorporated tank-mix may be applied up to 21 days prior to planting Soybeans; with Metolachlor or S-Metolachlor, the 
pre-plant incorporated tank-mix may be applied up to 14 days prior to planting. 
On medium and fine textured soils with greater than 2% organic matter, a rate range is given for pre-emergence overlay 
application of THIS PRODUCT. The higher rate should be used (a) in fields with a history of severe broadleaf weed pressure, 
(b) when the time between pre-plant incorporated tank-mix and pre-emergence overlay applications approaches the 
maximum stated above, and/or (c) when the organic matter content of the soil is at the upper end of the indicated range. 
 
For control of Black nightshade, refer to the appropriate sections of the 
Ethalfluralin, Metolachlor or S-Metolachlor labels 
for specific instructions. 
 
SPLIT-SHOT APPLICATION 
Pre-plant Incorporated Tank-mix Application - FOLLOWED BY - Pre-emergence Overlay Application 
 
 Soil Texture* Rate of Combination 
Product/Ac.** 
 
+ 
Rate of This 
Product 
(Lb./Ac.) 
Rate of This Product (Lb./Ac.) 
Organic Matter 
< 2% 2 to 4% > 4% 
Coarse 
(Light): 
Loamy sand, 
Sand, 
Sandy loam 
 Trifluralin 
Or Metolachlor/S-Metolachlor 
Or Pendimethalin 
Or Ethalfluralin 
 
 Labeled rate 
 
 
 
+
 
 
 
0.3 (0.23 lb. a.i.) 
 
Followed By 
 
 
0.2 
(0.15 lb. a.i.) 
 
 
0.2 
(0.15 lb. 
a.i.)
 
 
 
0.2 to 0.3 
(0.15 to 0.23 
lb. a.i.)
 
 
Medium: 
Loam, Silt 
loam, Sandy 
clay loam, 
Silt, Sandy 
clay
 
 Trifluralin 
Or Metolachlor/S-Metolachlor 
Or Pendimethalin 
Or Ethalfluralin 
 
 Labeled rate 
 
 
 
+ 
0.5 (0.38 lb. a.i.) 
Followed By 
Or 
0.3*** (0.23 lb. a.i.) 
Followed By 
0.2 
(0.15 lb. a.i.) 
 
 
 
 
0.3 
(0.23 lb. a.i.) 
0.2 to 0.3 
(0.15 to 
0.23 lb. 
a.i.) 
 
0.3 to 0.5 
(0.23 to 
0.38 lb. 
a.i.) 
 
0.3 to 0.5 
(0.23 to 0.38 
lb. a.i.) 
 
 
(0.5 to 0.6)**** 
(0.38 to 0.45 
lb. a.i.)

Page 41 of 71 
 
Fine 
(Heavy): 
Silty clay 
loam*****, 
Clay loam, 
Silty clay, 
Clay 
 Trifluralin 
Or Metolachlor/S-Metolachlor 
Or Pendimethalin 
Or Ethalfluralin 
 
 Labeled rate 
 
 
 
+ 
0.6 (0.45 lb. a.i.) 
 
Followed By 
 
Or 
 
 0.5*** (0.38 lb. a.i.) 
 
Followed By 
0.2 
(0.15 lb. a.i.) 
 
 
 
0.3 
(0.23 lb. a.i.)
 
0.2 to 0.3 
(0.15 to 
0.23 lb. 
a.i.) 
 
 0.3 to 0.5 
(0.23 to 
0.38 lb. 
a.i.) 
 
0.3 to 0.5 
(0.23 to 0.38 
lb. a.i.) 
 
 
(0.5 to 0.6)**** 
(0.38 to 0.45 
lb. a.i.) 
 
 
 
*On coarse textured soils, do not use on sand soils with less than 1% organic matter or on loamy sand or sandy loam 
soils with less than 0.5% organic matter. However, on coarse textured soils with a calcareous surface area or a pH of 
7.5 or higher, do not use on sand soils with less than 2% organic matter or on loamy sand or sandy loam soils with less 
than 1% organic matter. 
 **Use the labeled rate of the combination product. . 
 ***Use this lower rate of THIS PRODUCT in the pre-plant incorporated tank-mix on soils having a calcareous surface area 
or a pH of 7.5 or higher and in those situations where soils within a field vary extremely in texture or organic matter 
content. 
****Reduce this pre-emergence overlay rate of THIS PRODUC T by 0.2 lb./Ac. (0.15 lb. a.i./Ac.) when using SPLIT-SHOT 
application on soils with over 4% organic matter and which have a calcareous surface area or a pH of 7.5 or higher. 
*****Silty clay loam soils are transitional soils and may be clas sified as medium textured soils in some regions of the U.S. 
 
EXTENDED SPLIT-SHOT APPLICATION 
(Includes No-Till, Reduced-Till, Ridge-Till, Strip-Till, Mulch-Till) 
An early pre-plant (surface-applied or shallow incorporat ed) application of THIS PRODUCT tank- mixed with either. 
Metolachlor or S-Metolachlor followed by a pre-emergence surface application of THIS PRODUCT tank-mixed with 
Metolachlor or S-Metolachlor after planting but prior to Soybean emergence, will control more broadleaf and grass 
weeds in Soybeans than either herbicide used alone. 
An extended split-shot application will decrease the need for tillage and/or contact herbicides for the control of existing 
vegetation prior to planting while providing residual control of weeds after planting. 
 
When an extended split-shot application of THIS PRODUCT with Metolachlor or S-Metolachlor is used, the pre-plant 
tank-mix combination may be applied 15 to 30 days prior to planting Soybeans. Follow directions on the label 
accompanying the product for SPLIT-SHOT applications from 0 to 14 days before planting.
 
Where a rate range is given, the higher specified rates should be used (a) in fields with a history of severe weed 
pressure, (b) when the time between early pre-plant tank-mix and pre-emergence overlay applications approaches 
the maximum 30 days, (c) when the organic matter content of the soil is at the upper end of the indicated range and/or 
(d) when heavy crop residues are present on the soil surface. 
 
When weeds exceed 1 to 1.5 inches in height or diameter at application, use a contact herbicide, such as Glyphosate 
or Paraquat. Refer to the Metolachlor or S-Metolachlor labe l and to appropriate sections of this label for additional 
information on soil preparation, herbicide application, weeds controlled, precautions, restrictions, limitations and 
sprayer clean-up. 
 
EXTENDED SPLIT-SHOT APPLICATION 
Early Pre-plant Tank-mix Application 
(Surface-Applied or Shallow Incorporated) 
 
 
 
Followed By 
 
Pre-emergence Overlay Application 
 
Soil 
Texture* 
 
Rate of 
Combination 
Product/Ac.** 
 
 
+ 
 
Rate of 
THIS 
PRODUCT 
(Lb./Ac.) 
 
Rate of 
Combination 
Product/Ac. 
 
 
 
+ 
Rate of THIS PRODUCT 
(Lb./Ac.) 
Organic Matter 
0.5 to 
2% 
2 to 
4% 
> 
4% 
COARSE 
(Light): 
Sand, Loamy 
sand, Sandy 
loam 
Metolachlor 
Labeled rate 
 
+ 
 
0.3 to 0.5 
(0.23 to 0.38 
lb. a.i.) 
Metolachlor 
 
 
Labeled rate 
 
 
 
 
+ 
 
 
 
0.2 
(0.15 lb. 
a.i.) 
0.2 
to 
0.3 
(0.15 to 
0.23 lb. 
a.i.) 
 
 
0.3 
(0.23 lb. 
a.i.)

Page 42 of 71 
 
 
MEDIUM: 
Loam, Silt 
loam, Sandy 
clay loam, 
Silt, Sandy 
clay 
Metolachlor 
Labeled rate 
 
 
+ 
 
***0.5 to 0.6 
(0.38 to 0.45 
lb. a.i.) 
Metolachlor 
 
 
 
Labeled rate 
 
 
 
. 
 
+ 
 
0.3 
(0.23 lb. 
a.i.) 
 
 0.3 
to 
0.5 
(0.23 to 
0.38 lb. 
a.i.) 
 
0.5 
to 
0.6 
(0.38 to 
0.45 lb. 
a.i.) 
FINE 
(Heavy): 
Silty clay 
loam****, 
Clay loam, 
Silty clay, 
Clay
 
Metolachlor 
Labeled rate 
 
 
+ 
 
 ***0.6 to 0.8 
 (0.45 to 0.6 
lb. a.i.) 
Metolachlor 
 
 
 
Labeled rate 
 
 
 
 
+ 
 
 
 
 
 
0.3 
(0.23 lb. 
a.i.) 
 
0.3 
to 
0.5 
(0.23 
to 0.38 
lb. a.i.) 
 
0.5 
 to 
0.6 
(0.38 to 
0.45 lb. 
a.i.) *On coarse textured soils, do not use on sand soil with less than 1% organic matter. However, on coarse textured soils 
with a calcareous surface area or a pH of 7.5 or higher, do not use on sand soils with less than 2% organic matter or on 
loamy sand or sandy loam soils with less than 1% organic matter. 
 **Use the labeled rate of the combination product. 
 ***Use the lower rate of THIS PRODUCT in the early pre-plant tank-mix on soils having a calcareous surface area or a pH 
of 7.5 or higher, and in those rare situations where soils with in a field vary extremely in texture or organic matter content. 
****Silty clay loam soils are transitional soils and may be clas sified as medium textured soils in some regions of the U.S. 
 
THIS PRODUCT PLUS ETHALFLURALIN 
THIS PRODUCT plus Ethalfluralin Overlay Application: THIS PRODUCT may be applied as a pre-emergence 
overlay application following a pre-plant incorporated application of Ethalfluralin. C onsult the Ethalfluralin label for 
specific use directions, restrictions and any additional weeds not specified on this label. 
 
THIS PRODUCT plus Ethalfluralin Tank-mix Application: Incorporate the tank-mixture into the top 1 to 2 inches of 
soil within 21 days before planting according to label directions for Ethalfluralin. 
Apply THIS PRODUCT plus Ethalfluralin pre-plant incorporated if furrow irrigation is used or when a period of dry 
weather after application is expected. If Soybeans are pl anted on beds, apply and incorporate the tank-mixture after 
bed formation. 
 
Mixing: Refer to the "USE INFORMATION" section in the front of this labeL 
 
Application: 
Apply Ethalfluralin uniformly and thoroughly mix into th e soil within 2 days after application. For specific 
application information, refer to the "USE INFORMATION" section in the front of this label. 
 
 
BROADCAST RATES 
Soil Texture This Product (Lb./Ac.) Ethalfluralin 
COARSE* 
Sandy loam, Loamy sand 0.3 (0.23 lb. a.i.) Labeled rate 
MEDIUM** 
Loam, Silt loam, Silt, Sandy clay, 
Sandy clay loam 
0.5 (0.38 lb. a.i.) Labeled rate 
FINE** 
Silty clay, Silty clay loam***, Clay, 
Clay loam
 
0.6 (0.45 lb. a.i.) Labeled rate

Page 43 of 71 
 
 *Do not use on coarse soils with less than 1% organic matter. 
 **For control of Lambsquarters, Redroot pigweed, Wild mustard, Green and Yellow Foxtails on alkaline (calcareous) 
soils in Minnesota, Nebraska, South Dakota and North Dakota only, apply THIS PRODUCT at rates of 0.3 lb./Ac. 
(0.23 lb. a.i./Ac.) on medium soils and 0.3 to 0.5 lb./Ac. (0 .23 to 0.38 lb. a.i./Ac.) on fine soils regardless of soil 
organic matter percentage (use 0.5 lb. (0.38 lb. a.i./Ac.) only where soil pH is less than 7.5 and weed pressure is 
heavy). The 0.3 lb. rate of THIS PRODUCT (0.23 lb. a.i./Ac.) in tank-mix combination with Ethalfluralin can be 
applied regardless of soil pH. For control of other weeds not listed on the label, use THIS PRODUCT at full rates 
specified above, but note that crop injury may occur on soils having a calcareous surface area or a pH of 7.5 or 
higher. 
***Silty clay loams soils are transitional soils and may be clas sified as medium textured soils in some regions of the 
U.S. 
 
For Black nightshade control, refer to the Ethalfluralin label for specific rates and application instructions. 
 
Use Precautions: For additional precautions, restrictions, limitations, incorporation, and sprayer cleanup information, 
refer to the appropriate sections of this label and the Ethalfluralin label. 
 
THIS PRODUCT PLUS TRIFLURALIN 
THIS PRODUCT plus Trifluralin Overlay Application: THIS PRODUCT may be applied as a pre-emergence 
broadcast or band overlay application following a pre-plant incorporated treatment of Trifluralin. Consult the Trifluralin 
label for specific directions for use, directions, restri ctions and any additional weeds not specified on this label. 
THIS PRODUCT plus Trifluralin Tank-mix Application: A single application of a tank-mix combination of THIS 
PRODUCT and Trifluralin will control more broadleaf and grass weeds in Soybeans than when either herbicide is used 
alone. 
Prepare the soil surface by deep plowing, offset disking or tandem disking prior to the application of the herbicide 
combination. The soil surface should be well prepared and free of clods and trash. 
THIS PRODUCT plus Trifluralin tank-mix combination may be applied and incorporated into the soil up to 10 days 
before planting. 
Mixing: Refer to the "USE INFORMATION" section in front of this label. 
Application: For specific application information, refer to the "USE INFORMATION" section in front of this label. 
Apply THIS PRODUCT plus Trifluralin to the soil surface and incorporate in the same operation, if possible. Variable 
weed control may result from delayed incorporation if THIS PRODUCT plus Trifluralin are applied to a wet, warm soil 
surface or if the wind velocity is 10 miles per hour or higher. Use machinery that mixes THIS PRODUCT plus Trifluralin 
thoroughly with the soil. Incorporation may be delayed up to 24 hours after application. Shallow incorporation with 
implements set to cut less than 2 inches deep may result in erratic weed control. Do not use spike or spring-tooth 
harrows alone for incorporation. 
Incorporation Equipment: 
1. Set PTO driven equipment (tillers, cultivators, hoes) to cu t 2 to 3 inches deep and space rotors to provide a clean 
sweep of the soil. PTO equipment should not be operated at a speed greater than 4 miles per hour. 
2. Set disk to cut 4 to 6 inches deep and operate twice in different directions at 4 to 6 miles per hour. 
3. Set mulch treader and other similar disk-type implements to cut 3 to 4 inches deep and operate twice in different 
directions at 5 to 8 miles per hour. 
4. For Coarse and Medium Textured Soils Only: Set rolling cultivator to cut 2 to 4 inches deep and operate twice 
at 6 to 8 miles per hour. Set bed conditions (Do-All) to cut 2 to 4 inches deep and operate at 4 to 6 miles per 
hour.

Page 44 of 71 
 
 
BROADCAST RATES 
Soil Texture THIS PRODUCT (Lb./Ac.) Trifluralin 
COARSE* 
Sandy loam, Loamy sand 
0.3 (0.23 lb. a.i.) Labeled rate 
MEDIUM 
Loam, Silt loam, Silt, Sandy clay, Sandy 
clay loam 
0.5 (0.38 lb. a.i.) Labeled rate 
FINE 
Silty clay, S ilty clay loam**, Clay, Clay 
loam*** 
0.6 (0.45 lb. a.i.) Labeled rate 
 *Do not use on coarse soils with less than 1% organic matter. 
 **Silty clay loam soils are transitional soils and may be classified as medium textured soils in some regions of the U.S. 
***For control of Lambsquarters, Redroot pigweed, Wild mustard, and Green and Yellow foxtails on alkaline (calcareous) soils in 
Minnesota, Nebraska, North Dakota and South Dakota only, apply THIS PRODUCT at 0.3 lb./Ac. (0.23 lb. a.i./Ac.) on medium soils 
and 0.3 to 0.5 lb./Ac. (0.23 to 0.38 lb. a.i./Ac.) on fine so ils regardless of soil organic matter percentage (use 0.5 lb./Ac. [0.38 lb. 
a.i./Ac.] only where soil pH is less than 7.5 and weed pressure is heavy). The 0.3 lb./Ac. (0.23 lb. a.i./Ac.) rate of THIS PRO DUCT 
in tank-mix combination with Trifluralin can be applied regardless of soil pH. For control of other weeds listed on the label, use THIS 
PRODUCT at full rates specified above, but note that crop injury may occur on soils having a calcareous surface area or a pH of 7.5 
or higher. 
 
Use Precautions: 
• Seedling disease, cold weather, excessive moisture, high salt concentration or drought may weaken Soybean 
seedlings and increase possibility of damage from the tank-mix. 
• Plant Soybeans no deeper than 2 inches. 
• For additional precautions, restrictions and limitations an d sprayer cleanup information, refer to the appropriate 
section of this label. 
 
Use Restrictions: 
• Do not rotate any crop not listed on this label for 18 months following application. 
• Do not use THIS PRODUCT plus Trifluralin tank-mix combination on soil containing charcoal in Arkansas, 
Louisiana and Mississippi. 
 
THIS PRODUCT PLUS METOLACHLOR or S-METOLACHLOR 
THIS PRODUCT plus Metolachlor or S-Metolachlor Overlay Application: Apply a pre-plant incorporated 
treatment of Metolachlor or S-Metolachlor as directed on that product label for use on Soybeans. Follow with a pre-
emergence treatment of THIS PRODUCT as directed on this label for use on Soybeans. 
 
THIS PRODUCT Plus Metolachlor or S-Metolachlor Tank-Mix Applications 
Pre-plant Incorporated Application: Incorporate the tank-mixture into the top 2 inches of soil within 14 days before 
planting using a disk, harrow, rolling cultivator or similar implement. 
 
Apply THIS PRODUCT plus Metolachlor or S-Metolachlor pre-plant incorporated if furrow irrigation is used or when 
a period of dry weather after application is expected. If Soybeans are planted on beds, apply and incorporate the 
tank-mixture after bed formation.
 
 
Pre-emergence Application - 
Dry weather following pre-emergence application of THIS PRODUCT plus 
Metolachlor or S-Metolachlor tank-mixture may reduce ef fectiveness. If weeds develop, cultivate uniformly with 
shallow tillage equipment such as a rotary hoe that will not damage Soybeans. 
 
Mixing Instructions: Refer to the "USE INFORMATION" section in the front of this label. 
 
For information on applying THIS PRODUCT in fluid or dry fertilizer, refer to “APPLICATION OF THIS PRODUCT 
IN FLUID FERTILIZERS” or “COMMERCIAL IMPREGNATION AND APPLICATION OF THIS PRODUCT ON DRY 
BULK FERTILIZER” sections in front of this label.

Page 45 of 71 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
BROADCAST RATES 
THIS PRODUCT plus Metolachlor or S-Metolachlor Tank-Mix 
Pre-emergence Applications 
0.5 to 3% Organic Matter 
 
Soil Texture 
THIS PRODUCT 
(Lb./Ac.) 
Metolachlor or S-Metolachlor 
COARSE* 
Loamy sand, Sandy loam 
0.3 (0.23 lb. a.i.) Labeled rate 
MEDIUM 
Loam, Silt loam, Silt 
0.5 (0.38 lb. a.i.) Labeled rate 
FINE 
Silty clay loam**, Sandy clay loam, Silty 
clay, Sandy clay, Clay loam, Clay 
0.6 (0.45 lb. a.i.) 
Labeled rate 
MISSISSIPPI DELTA ONLY 
Silty clay, Clay 
1 (0.75 lb. a.i.) Labeled rate 
> 3% Organic Matter 
COARSE* 
Loamy sand, Sandy loam 
0.5 (0.38 lb. a.i.) Labeled rate 
MEDIUM 
Loam, Silt loam, Silt 
0.6 (0.45 lb. a.i.) Labeled rate 
FINE 
Silty clay loam**, Sandy clay loam, Silty 
clay, Sandy clay, Clay loam, Clay 
 
0.6 to 0.8 
(0.45 to 0.6 lb. a.i.) 
 
Labeled rate 
MISSISSIPPI DELTA ONLY 
Silty clay, Clay 
1 
(0.75 lb. a.i.) 
Labeled rate 
 *Do not use on sand soils. Do not apply THIS PRODUCT and Metolachlor or S-Metolachlor overlay or tank-mix 
pre-emergence on loamy sand with less than 2% organic matter. 
**Silty clay loam soils are transitional soils and may be classified as medium textured soils in some regions of 
the U.S.

Page 46 of 71 
 
 
BROADCAST RATES 
THIS PRODUCT plus Metolachlor or S-Metolachlor Tank-Mix 
Pre-plant Incorporated Applications 
0.5 to < 3% Organic Matter 
 
Soil Texture 
THIS PRODUCT 
(Lb./Ac.) 
Metolachlor or S-Metolachlor 
COARSE* 
Loamy sand, Sandy loam 
0.3 (0.23 lb. a.i.) Labeled rate 
MEDIUM 
Loam, Silt loam, Silt) 
0.5 (0.38 lb. a.i.) Labeled rate 
FINE 
Silty clay loam**, Sandy clay loam, Silty 
clay, Sandy clay, Clay loam, Clay 
0.6 (0.45 lb. a.i.) 
Labeled rate 
MISSISSIPPI DELTA ONLY 
Silty clay, Clay 1 (0.75 lb. a.i.) Labeled rate 
> 3% Organic Matter 
COARSE* 
Loamy sand, Sandy loam 
0.3 (0.23 lb. a.i.) Labeled rate 
MEDIUM 
Loam, Silt loam, Silt 
0.5 (0.38 lb. a.i.) Labeled rate 
FINE 
Silty clay loam**, Sandy clay loam, Silty 
clay, Sandy clay, Clay loam, Clay 
0.6 (0.45 lb. a.i.) 
Labeled rate 
MISSISSIPPI DELTA ONLY 
Silty clay, Clay 0.6 to 0.8 (0.45 to 0.6 lb. a.i.) Labeled rate 
 *Do not use on sand soils. Do not apply THIS PRODUCT plus Metolachlor or S-Metolachlor tank-mix pre-plant 
incorporated on sand or loamy sand with less than 2% organic matter or crop injury may occur. 
**Silty clay loam soils are transitional soils and may be classified as medium textured soils in some regions of the 
U.S. 
 
Use Precautions: 
For additional precautions, restrictions, limitations a nd sprayer cleanup information, refer to the appropriate 
sections of this label and the Metolachlor or S-Metolachlor label. 
THIS PRODUCT PLUS PENDIMETHALIN 
THIS PRODUCT plus Pendimethalin Overlay Application: Apply a pre-plant incorporated treatment of 
Pendimethalin as directed on that product label for use on Soybeans. Follow with a pre-emergence treatment of 
THIS PRODUCT as directed on this label for use on Soybeans. 
THIS PRODUCT plus Pendimethalin Tank-mix Application: 
Pre-plant Incorporated Application - Prepare the soil by plowing or disking to mix previous crop residues into the 
soil to a depth of 4 to 6 inches. 
For specific application information, refer to the "USE INFORMATION" section in the front of this label. 
Incorporate the tank-mixture into the top 1 or 2 inches of soil within 7 days after application according to label 
directions for Pendimethalin. Mechanical incorporation is not required if a rain of 0.25 inch or more occurs within 7 
days after application. Soybeans must be planted no later than 7 days after application of the tank-mixture.

Page 47 of 71 
 
 
Pre-emergence Application - Except for minimum and no-tillage systems, the seedbed should be firm and free of 
trash and clods. 
For specific application information, refer to the "USE INFORMATION" section in the front of this label. Do not 
apply Pendimethalin pre-emergence north of Interstate 80. This application must be made after planting and before 
crop emergence. Do not incorporate. 
If cultivation is necessary because of soil crusting, soil compaction or weed germination before rain or irrigation, 
use shallow tilling equipment such as a rotary hoe that does not damage Soybeans. 
Mixing Instructions: Refer to the "USE INFORMATION" section in the front of this label. 
For information on applying THIS PRODUCT in fluid or dry fertilizer, refer to the "APPLICATION OF THIS 
PRODUCT IN FLUID FERTILIZERS" or "COMMERCIAL IMPREGNATION AND APPLICATION OF THIS PRODUCT ON 
DRY BULK FERTILIZER" section of this label. 
 
Southern States and Eastern Coastal Plains: 
For use only in Alabama, Arkansas, Florida, Georgia, Louisiana, Mississippi, North Carolina, Oklahoma, South 
Eastern Missouri "Bootheel" Region and Coastal Plains of Delaware*, Maryland*, New Jersey* and Virginia*. 
(*THIS PRODUCT plus Pendimethalin should not be used on soils with less than 2% organic matter in the coastal 
plains of New Jersey or the Delmarva Peninsula.) 
 
BROADCAST RATES 
THIS PRODUCT plus Pendimethalin Tank-Mix Applications 
Soil Texture THIS PRODUCT 
(Lb./Ac.) 
Pendimethalin 
COARSE* 
Sandy loam, Loamy sand 0.3 (0.23 lb. a.i.) Labeled rate 
MEDIUM 
Loam, Silt loam, Silt, Sandy clay, 
Sandy clay loam 
0.5 (0.38 lb. a.i.) 
Labeled rate 
FINE 
Silty clay, Silty clay loam**, Clay, 
Clay loam
 
0.6 (0.45 lb. a.i.) 
Labeled rate 
 *Do not use on sand soils. Do not use on loamy sand or sandy loam containing less than 1% organic matter. 
**Silty clay loam soils are transitional soils and may be classified as medium textured soils in certain regions of the U.S. 
 
Use Restriction: 
• Do not use on muck or peat soils. 
 
North Eastern and North Central States: 
For use only in Illinois, Indiana, Iowa, Kansas, Kentucky, Michigan, Minnesota, Nebraska, New York, North Dakota, 
Ohio, Pennsylvania, South Dakota, Wisconsin and Missouri (except the "Bootheel" Region). 
 
BROADCAST RATES 
THIS PRODUCT plus Pendimethalin Tank-Mix Applications 
0.5 to 3% Organic Matter 
Soil Texture THIS PRODUCT 
(Lb./Ac.) 
Pendimethalin 
COARSE* 
Sandy loam, Loamy sand 0.3 (0.23 lb. a.i.) Labeled rate 
MEDIUM 
Loam, Silt loam, Sandy clay, Sandy clay loam 0.5 (0.38 lb. a.i.) Labeled rate 
FINE 
Silty clay, Silty clay loam** clay, Clay loam 0.5 to 0.6 (0.38 to 0.45 lb. a.i.) Labeled rate

Page 48 of 71 
 
> 3% Organic Matter 
COARSE* 
Sandy loam, Loamy sand 0.5 (0.38 lb. a.i.) Labeled rate 
MEDIUM 
Loam, Silt loam, Sandy clay, Sandy clay loam 0.5 to 0.6 (0.38 to 0.45 lb. a.i.) Labeled rate 
FINE 
Silty clay, Silty clay loam**, Clay, Clay loam 0.6 to 0.8 (0.45 to 0.6 lb. a.i.) Labeled rate 
 *Do not use on sand soils. Do not use on loamy sand or sandy loam containing less than 1% organic matter. Where a 
range of rates is shown for medium and fine soils, use the higher specified rate if heavy weed infestations are 
anticipated. 
**Silty clay loam soils are transitional soils and may be classified as medium textured soils in some regions of the 
U.S. 
 
Use Precautions: 
• Soil incorporation deeper than specified will reduce weed control and can result in crop injury. 
• For additional precautions, restrictions, limitations and sprayer cleanup information, refer to the appropriate sections 
of this label and the Pendimethalin label. 
 
Use Restriction: 
• Do not use on muck or peat soils. 
 
THIS PRODUCT PLUS CLOMAZONE 
 
THIS PRODUCT may be applied in combination with Clomazon e as a pre-plant or shallow incorporated application 
for the control of certain weeds in Soybeans. Consult the Clomazone label for specific use directions, precautions, 
restrictions and any additional weeds not specified on this label. 
Mixing: Refer to the "USE INFORMATION" section in the front of this label. 
Application: THIS PRODUCT plus Clomazone may only be applied with ground equipment as a pre-plant or shallow 
incorporated application. THIS PRODUCT plus Clomazone should be immediately incorporated into the top 1 to 3 
inches after application unless surface is dry. On dry soils, incorporate into the top 1 to 3 inches within 3 hours of 
tank-mix application.
 
Do not apply this tank-mix within 1,000 feet of towns an d subdivisions, commercial vegetable, fruit, nurseries or 
greenhouse operations. 
A minimum of 15 gallons spray volume per acre should be used with appropriate nozzle types and sizes to produce 
a coarse spray droplet. The use of an approved agricultural drift reducing additive is recommended for application 
volumes of 15 to 40 gallons per acre. The use of an approv ed agricultural drift reducing additive is required at spray 
volumes of 10 to 15 gallons per acre. 
Note: Off-site movement of Clomazone spray drift or vapors can cause foliar whitening or yellowing of some 
vegetation. Prior to application of Clomazone, read and strictly follow all precautions and application instructions as 
set forth in that label.
 
For additional information on application, refer to the "USE INFORMATION" section in the front of this label and the 
Clomazone label.

Page 49 of 71 
 
 
 
THIS PRODUCT plus Clomazone Tank-Mix Pre-plant Incorporated Application (Broadcast Rates) 
0.5 to 3% Organic Matter 
Soil Texture* THIS PRODUCT (Lb./Ac.) Clomazone 
COARSE** 
Sandy loam, Loamy sand 
0.3 
(0.23 lb. a.i.) 
Labeled rate 
MEDIUM 
Loam, Silt loam, Silt, Sandy clay, Sandy clay loam 
0.3 to 0.5 
(0.23 to 0.38 lb. a.i.) 
Labeled rate 
FINE 
Silty clay, Silty clay loam***, Clay, Clay loam 
0.3 to 0.5 
(0.23 to 0.38 lb. a.i.) 
Labeled rate 
> 3% Organic Matter 
COARSE** 
Sandy loam, Loamy sand 
0.3 
 (0.23 lb. a.i.) 
Labeled rate 
MEDIUM 
Loam, Silt loam, Silt, Sandy clay, Sandy clay loam 
0.3 to 0.5 
(0.23 to 0.38 lb. a.i.) 
Labeled rate 
FINE 
Silty clay, Silty clay loam***, Clay, Clay loam 
0.5 to 0.6 
(0.38 to 0.45 lb. a.i.) 
Labeled rate 
 *Crop injury may occur on soils having a calcareous surface area or a pH of 7.1 or higher. 
 **Do not use on coarse soils with less than 1% organic matter. 
***Silty clay loam soils are transitional soils and may be classified as medium textured soils in some regions of the 
U.S. 
 
Weeds Controlled: 
 
 WEEDS CONTROLLED 
Barnyardgrass* 
Bristly Starbur 
Bluegrass 
Broadleaf Signalgrass 
Carpetweed 
Copperleaf 
Crabgrass* 
Fall Panicum* 
Florida Beggarweed 
Florida Pusley 
Foxtails (Green, Giant, 
Robust Purple, *Yellow) 
Galinsoga 
Goosegrass 
Jimsonweed 
Johnsongrass (seedling)* 
Knotweed 
Lambsquarters 
Pigweeds 
Prickly Sida/Teaweed 
Purslane 
Ragweed, Common 
Redweed 
Sesbania 
Smartweeds 
Spurred Anoda 
Texas Panicum 
Velvetleaf 
Venice Mallow 
Wild Mustards 
Witchgrass 
*Use the labeled rate of Clomazone on coarse and medium textured soils with high populations of these weeds. 
 
Use Precautions: 
Observe all precautions and limitations on labeling of all products used in mixtures. 
 
Use Restrictions: 
• Do not apply by air or through irrigation equipment. 
• Do not rotate to Alfalfa, Barley, seed Corn, Oats, Rye or Wheat in the Fall of the year of application or in the Spring 
of the following year as crop injury may occur. 
• Do not apply when weather conditions favor drift. 
• Do not use treated vines for feed or forage. 
 
THIS PRODUCT PLUS CHLORIMURON + METRIBUZIN (PREMIX) PLUS A GRASS HERBICIDE 
A tank-mix combination of THIS PRODUCT plus Chlorimuron + Me tribuzin (Premix) plus a registered grass herbicide such 
as Ethalfluralin, Metolachlor, S-Metolachlor, Pend imethalin, or Trifluralin may be used in Soybeans.

Page 50 of 71 
 
Application: 
Tank-mix combinations which include Metolachlor, S-Metolachlor, or Pendimethalin can be applied pre-emergence 
broadcast or pre-plant incorporated broadcast. When Ethalfluralin or Trifluralin are used in the tank-mix, apply pre-plant 
incorporated broadcast. Refer to the table below for rates of each product to be used in tank-mix combinations. 
 
THIS PRODUCT plus Chlorimuron + Metribuzin (Premix) plus a Grass Herbicide 
(Broadcast Rates) 
 
Product 
Soil Texture* 
Coarse** Medium Fine 
THIS PRODUCT (Lb./Ac.) 0.3 (0.23 lb. a.i.) 0.3 to 0.5*** 
(0.23 to 0.38 lb. a.i.) 
 0.5 to 0.6*** 
(0.38 to 0.45 lb. a.i.) 
Chlorimuron + Metribuzin (Premix) Labeled rate Labeled rate Labeled rate 
Metolachlor Labeled rate Labeled rate Labeled rate 
Pendimethalin Labeled rate Labeled rate Labeled rate 
Ethalfluralin Labeled rate Labeled rate Labeled rate 
Trifluralin Labeled rate Labeled rate Labeled rate 
 *Do not use on soils with a pH greater than 7.0. 
 **Refer to "SOIL TEXTURE" section in front of this label for specific soil classification. 
***Use the lower rate of THIS PRODUCT in pre-plant incorporated tank-mix as in those situations where soil 
within a field vary extremely in texture or organic matter content. 
 
Important: If weeds escape in fields treated with these tank-mix combinations, post-emergence application of a registered 
herbicide will be needed for control. 
Refer to the "USE INFORMATION" section of this label for mixing and application directions. 
 
Weeds Controlled: 
 
 Annual Broadleaves 
Bristly Starbur Galinsoga Prickly Sida/Teaweed Shepherdspurse 
Carpetweed 
Cocklebur 
Copperleaf, Hophornbeam 
 Florida Beggarweed 
 Florida Pusley
 
Jimsonweed 
Knotweed 
Kochia 
Lambsquarters 
Pigweed 
Purslane 
Ragweed, Common 
Redweed
 
Russian Thistle 
Sesbania 
Smartweed 
Spurred Anoda 
Velvetleaf 
Venice mallow
 
Wild mustard 
Annual Grasses 
Barnyardgrass Crabgrass Johnsongrass (seedling) Sandbur 
Bluegrass 
Broadleaf signalgrass 
Browntop Millet 
Crowfootgrass 
Foxtails 
Goosegrass
 
Junglerice 
Panicum, Fall 
Panicum, Texas
 
Sprangletop 
Stinkgrass 
 
Use Precautions: 
• For additional precautions, restrictions, limitations and sprayer cleanup information, refer to the appropriate sections 
of the labels for THIS PRODUCT and Chlorimuron + Metribuzin (premix). 
 
Use Restriction: 
• Do not use treated vines for feed or forage.

Page 51 of 71 
 
THIS PRODUCT PLUS CLOMAZONE PLUS A GRASS HERBICIDE 
THIS PRODUCT may be applied with Clomazone and a grass herbicide herbicide such as Ethalfluralin, Metolachlor 
S-Metolachlor, Pendimethalin, or Trifluralin for the control of certain broadleaf weeds and grasses in Soybeans. This 
combination will provide improved control of heavy infe stations of Common ragweed, Jimsonweed and Velvetleaf. 
THIS PRODUCT and Clomazone plus a grass herbicide may be applied pre-plant incorporated broadcast. Consult the 
tank-mix partner’s labels for specific use directions, prec autions, restrictions and additional weeds controlled not 
specified on this label.
 
 
Mixing: Refer to the "USE INFORMATION" section in the front of this label. 
Application: For specific application information, refer to the "USE INFORMATION" section in the front of this label. 
 
THIS PRODUCT plus Clomazone plus a Grass Herbicide 
(Broadcast Rates) 
 
Product 
Soil Texture* 
Coarse Medium Fine 
THIS PRODUCT (Lb./Ac.) 0.3 (0.23 lb. a.i.) 0.3 to 0.5** 
(0.23 to 0.38 lb. a.i.) 
 0.5 to 0.6** 
(0.38 to 0.45 lb. a.i.) 
Clomazone*** Labeled rate Labeled rate Labeled rate 
Metolachlor Labeled rate Labeled rate Labeled rate 
Pendimethalin Labeled rate Labeled rate Labeled rate 
Ethalfluralin Labeled rate Labeled rate Labeled rate 
Trifluralin Labeled rate Labeled rate Labeled rate 
 *Refer to the "SOIL TEXTURE" section on this label for specific soil classification. On coarse textured soils with a 
calcareous surface area or a pH of 7.5 or higher, do not use on loamy sand or sandy loam soils with less than 1% 
organic matter. 
 **Use the higher rate of THIS PRODUCT to control Hemp sesbania and Sicklepod. Use the lower rate of THIS 
PRODUCT in the pre-plant incorporated tank-mix on so ils having a calcareous surface area or a pH of 7.5 or higher 
and in those situations where soils within a field vary extremely in texture or organic matter content. 
***Use the higher specified rate under moderate to heavy weed infestations. 
 
Weeds Controlled: 
 
Annual Broadleaves 
Bristly Starbur 
Carpetweed 
Copperleaf, Hophornbeam 
Florida Beggarweed 
Florida Pusley 
Galinsoga 
 
Jimsonweed 
Knotweed 
Kochia 
Lambsquarters 
Pigweeds 
Prickly Sida/Teaweed 
Purslane 
Ragweed, Common 
Redweed 
Russian Thistle 
Sesbania 
Shepherdspurse 
Sicklepod 
Smartweeds 
Spotted spurge 
Spurred Anoda 
Velvetleaf 
Venice mallow 
Wild Mustard
 
Annual Grasses 
Barnyardgrass 
Bluegrass 
Broadleaf Signalgrass 
Browntop Millet 
Crabgrass 
Crowfootgrass 
Foxtails 
Goosegrass 
Johnsongrass (seedling) 
Panicum, Fall 
Witchgrass

Page 52 of 71 
 
Weeds Suppressed: 
THIS PRODUCT and Clomazone plus Ethalfluralin, Metolachlor, Pendimethalin or Trifluralin will provide suppression 
(reduce the competition) of Cocklebur and Sunflower. 
 
THIS PRODUCT PLUS IMAZAQUIN PLUS A GRASS HERBICIDE 
THIS PRODUCT may be applied with Imazaquin and a grass herbicide Ethalfluralin, Metolachlor, Pendimethalin or 
Trifluralin to control certain broadleaf weeds and grasses in Soybeans. THIS PRODUCT and Imazaquin plus 
Ethalfluralin or Trifluralin may be applied pre-plant incorporated broadcast. THIS PRODUCT and Imazaquin plus 
Metolachlor or Pendimethalin may be applied pre-plant incorporated, pre-emergence broadcast or in a band 
application.
 
 
Mixing: 
Refer to the "USE INFORMATION" section in the front of this label. 
 
Application: 
For specific application information, refer to the "USE INFORMATION" section in the front of this 
label. 
 
THIS PRODUCT plus Imazaquin plus a Grass Herbicide 
(Broadcast Rates) 
 
Product 
SOIL TEXTURE* 
Coarse Medium Fine 
THIS PRODUCT (Lb./Ac.) 0.3 
(0.23 lb. a.i.) 
0.3 to 0.5** 
(0.23 to 0.38 lb. a.i.) 
0.5 to 0.6** 
(0.38 to 0.45 lb. a.i.) 
Imazaquin (Liquid)*** Labeled rate 
- OR - 
Labeled rate 
- OR - 
 Labeled rate 
- OR - 
Imazaquin DG*** Labeled rate Labeled rate Labeled rate 
Trifluralin Labeled rate Labeled rate Labeled rate 
Metolachlor or S-Metolachlor Labeled rate Labeled rate Labeled rate 
Pendimethalin Labeled rate Labeled rate Labeled rate 
Ethalfluralin Labeled rate Labeled rate Labeled rate 
 *Refer to the "SOIL TEXTURE" section on this label for specific soil classification. On coarse textured soils with a 
calcareous surface area or a pH of 7.5 or higher, do not use on loamy sand or s andy loam soils with less than 1% organic 
matter. 
**Use the higher specified rate of THIS PRODUCT for pr e-emergence tank-mix application and for the control of Hemp 
sesbania and Sicklepod. Use the lower rate of THIS PRODUCT in the pre-plant incorporated tank-mix on soils having a 
calcareous surface area or a pH of 7.5 or higher, and in those situations where soils within a field vary extremely in texture 
or organic matter content. 
***Use the higher specified rate under moderate to heavy weed infestations.

Page 53 of 71 
 
Weeds Controlled: THIS PRODUCT plus Imazaquin plus Ethalflurali n, Metolachlor, S-Metolachlor, Pendimethalin, 
or Trifluralin will control the following broadleaf weeds and grasses: 
 
Annual Broadleaves 
Bristly Starbur 
Buffalobur 
Carpetweed 
Cocklebur 
Coffee Senna
 
Copperleaf, Hophornbeam 
Florida Beggarweed 
Florida Pusley 
Galinsoga 
Jimsonweed 
Knotweed 
Kochia 
Lambsquarters 
Morningglory, Pitted 
Morningglory, Smallflower 
Pigweeds 
Prickly Sida/Teaweed 
Purslane 
Ragweed, Common 
Russian Thistle 
Sesbania 
Shepherdspurse 
Sicklepod 
Smartweeds 
Spotted spurge 
Spurred Anoda 
Sunflower 
Velvetleaf 
Venice mallow 
Wild Mustard
 
Annual Grasses 
Barnyardgrass 
Bluegrass 
Broadleaf signalgrass 
Browntop Millet 
Crabgrass 
Crowfootgrass 
Foxtails 
Goosegrass 
Johnsongrass (seedling) 
Panicum, 
Fall 
Witchgrass
 
 
Weeds Suppressed: 
THIS PRODUCT and Imazaquin plus Ethalfluralin, Metolachlor, S-Metolachlor, Pendimethalin or Trifluralin will 
suppress (reduce the competition of) Ivyleaf, all Morningglory and Red rice. 
 
 
THIS PRODUCT PLUS IMAZETHAPYR PLUS A GRASS HERBICIDE 
THIS PRODUCT may be tank-mixed with Imazethapyr and a registered grass herbicide such as Ethalfluralin, 
Metolachlor, S-Metolachlor, Pendimethalin or Trifluralin for control of certain broadleaf and grass weeds in 
Soybeans. 
 
Refer to the tank-mix partner’s labels for additional use directions, precautions, restrictions and limitations not 
included on this label. 
 
Tank-mix combinations of THIS PRODUCT plus Imazethapyr and 
Metolachlor, S-Metolachlor, Pendimethalin or 
Trifluralin can be applied broadcast pre-emergence or pre-plant incorporated. When the grass herbicide used is 
Ethalfluralin or Trifluralin, apply the tank-mix broadcast pre-plant incorporated. 
 
Mixing and Application: 
Refer to the "USE INFORMATION" section of this label for directions on mixing and 
application of THIS PRODUCT. 
 
 
THIS PRODUCT plus Imazethapyr plus a Grass Herbicide* 
(Broadcast Rate) 
Soil Texture THIS PRODUCT (Lb./Ac.) Imazethapyr 
Coarse 0.3 (0.23 lb. a.i.) Labeled rate 
Medium 0.4 to 0.5 (0.3 to 0.38 lb. a.i.) Labeled rate 
Fine 0.5 to 0.6 (0.38 to 0.45 lb. a.i.) Labeled rate 
*To control grass weeds, include Ethalfluralin, Metolachlor, S-Metolachlor, Pendimethalin or Trifluralin at label 
rates in the tank-mix with THIS PRODUCT and Ethalfluralin herbicides. 
 
Use Restrictions: 
• Do not apply this tank-mix with aerial or irrigation equipment. 
• Do not apply when weather conditions favor drift or allow sprays to drift onto adjacent desirable plants. 
• Do not use treated vines for feed or forage.

Page 54 of 71 
 
THIS PRODUCT PLUS IMAZETHAPYR + PENDIMETHALIN (Premix) 
THIS PRODUCT may be tank-mixed with Imazethapyr + Pendimethalin for broadcast pre-emergence or pre-
plant incorporated application to Soybeans for control of certain broadleaf and grass weeds. 
Refer to the tank-mix partner’s label for additional use directions, restrictions and limitations not included on this 
label. 
Mixing and Application: Refer to the "USE INFORMATION" section of this label for directions on mixing and 
application of THIS PRODUCT. 
 
 
THIS PRODUCT plus Imazethapyr + Pendimethalin (Premix) 
(Broadcast Rate) 
Soil Texture THIS PRODUCT (Lb./Ac.) Imazethapyr + Pendimethalin (Premix) 
COARSE 0.3 (0.23 lb. a.i.) Labeled rate 
MEDIUM 0.4 to 0.5 (0.3 to 0.38 lb. a.i.) Labeled rate 
FINE 0.5 to 0.6 (0.38 to 0.45 lb. a.i.) Labeled rate 
 
Use Restrictions: 
• Do not apply this tank-mix with aerial or irrigation equipment. 
• Do not apply when weather conditions favor drift, or allow sprays to drift onto desirable plants. 
• Do not use treated vines for feed or forage. 
 
THIS PRODUCT PLUS LINURON PLUS METOLACHLOR or S-METOLACHLOR 
THIS PRODUCT plus Linuron plus Metolachlor or S-Metolachlor Tank-mix Application: THIS PRODUCT may 
be applied in combination with Linuron and Metolachlor or S-Metolachlor as a pre-emergence application for the 
control of certain weeds in Soybeans. 
 
Consult the tank-mix partner’s labels for specific use directions, restrictions and limitations and any additional weeds 
not included on this label.
 
Mixing: Refer to the "USE INFORMATION" section in the front of this label. 
 
Application: Applications can be made only with ground spray equipment in accordance with specified soil types and 
dosage rates. For specific application information, refer to the "USE INFORMATION" section in the front of this label. 
 
 
THIS PRODUCT plus Linuron plus Metolachlor or S-Metolachlor 
Broadcast Rates (0.5 to 3% Organic Matter Only) 
 
 
 
Product 
SOIL TEXTURE 
COARSE* 
(Sandy, Loamy sand, 
Sandy loam) 
MEDIUM 
(Loam, silt loam, silt, Sandy 
clay, Sandy clay loam) 
FINE 
(Silty clay, Silty clay 
loam**, Clay, Clay 
loam) 
THIS PRODUCT (Lb./ Ac.) 0.2 to 0.25 
 (0.15 to 0.19 lb. a.i.) 
 0.25 to 0.3 
(0.19 to 0.23 lb. a.i.) 
0.3 to 0.5 
 (0.23 to 0.38 lb. a.i.) 
Linuron 
 
Labeled rate Labeled rate Labeled rate 
Metolachlor or S-Metolachlor Labeled rate Labeled rate Labeled rate 
 *Do not use THIS PRODUCT plus Linuron plus Metolachlor or S-Metolachlor on sand soils with less than 1% 
organic matter. 
**Silty clay loam soils are transitional soils and may be classified as medium textured soils in some regions of the 
U.S. 
 
FOR USE IN COARSE (LIGHT) SOILS in Alabama, Arkansas, Florida, Georgia, Louisiana, Mississippi, Missouri,

Page 55 of 71 
 
North Carolina, Oklahoma, South Carolina, Tennessee, Texas, and Virginia 
THIS PRODUCT may be used alone or in combination with Metolachlor, S-Metolachlor or Trifluralin for use in coarse-
textured, low organic matter soils in the states listed above for the control of certain weeds in Soybeans. 
Refer to the appropriate sections of this label and the tank -mix partner’s label for specific use directions, precautions, 
restrictions and limitations and any additional weeds not specified on this label. 
Mixing: Refer to the "USE INFORMATION" section in the front of this label. 
Application: For specific application information, refer to the "USE INFORMATION" section in the front of this label. 
 
Pre-emergence Application of THIS PRODUCT (Alone) - Broadcast Rates 
Soil Texture Organic Matter THIS PRODUCT (Lb. /Ac.) 
Coarse (Light) Soils: 
Sand*, Loamy Sandy, Sandy Loam > 0.5% 0.3 to 0.5** (0.23 to 0.38 lb. a.i.) 
 *Not for use on sand with less than 1% organic matter. . 
**Use the higher specified rate under heavy weed pressures and/or on soils higher in organic matter. 
 
THIS PRODUCT in Combination with Other Herbicides: THIS PRODUCT may be used in a tank-mix combination 
with Trifluralin as a pre-plant incorporated application or as a pre-emergence overlay application following a pre-plant 
incorporated application of Trifluralin. THIS PRODUC T may also be used as a pre-emergence application in 
combination with Metolachlor or S-Metolachlor. 
 
 
BROADCAST RATES IN COARSE (LIGHT) SOILS 
> 0.5% Organic Matter 
Soil Texture Combination Product / Ac. + THIS PRODUCT (Lb./Ac.) 
Coarse (Light) Soils: 
Sand* , Loamy sand, 
Sandy loam 
 
Pre-plant Incorporated 
Trifluralin: Labeled rate + 0.3 to 0.5** 
(0.23 to 0.38 lb. a.i.) 
Pre-emergence 
Metolachlor or S-Metolachlor: Labeled rate 
 
+ 
 
0.3 to 0.5** 
(0.23 to 0.38 lb. a.i.) *Not for use on sand with less than 1% organic matter. 
 **Use the higher specified rate under heavy weed pressures and/or on soils higher in organic matter. 
 
Use Restriction: 
• Do not use on sand soils with less than 1% organic matter or on sandy loam or loamy sand soils with less than 0.5% 
organic matter.
 
 
SEQUENTIAL APPLICATION OF IMAZAQUIN FOLLOWING APPLICATION OF THIS PRODUCT 
If needed, application of THIS PRODUCT alone or in a tank-mixture according to directions on this label may be 
followed by an early post-emergence application of Imazaquin at labeled rate to control Cocklebur. Apply the labeled 
rate of Imazaquin in a minimum of 20 gallons of water per acre. Use the labeled rate of Imazaquin if Cockleburs are 
less than 3 inches tall or have fewer than 3 leaves and are actively growing. For Cockleburs less than 6 inches tall 
and actively growing, use the labeled rate of Imazaquin per acre. Do not use Imazaquin when Soybeans or Cockleburs 
have been subjected to stress conditions such as temperature or moisture extremes. Do not exceed the total labeled 
rate of Imazaquin per acre in one season. Wait at least 10 days after applic ation of Imazaquin before cultivating.
 
When preparing the spray mixture with Imazaquin, add 2 pi nts of nonionic surfactant approved for use on growing 
crops and containing at least 80% active ingredient (e.g., Surf-AC 820) per 100 gallons of mixture. Apply crop oil 
concentrate (COC) (e.g., Peptoil) at the rate specified on the crop oil concentrate (COC) (e.g., Peptoil) label. 
Use Imazaquin only in the states where it is registered as listed on the product label. 
Apply Imazaquin at least 90 days before harvest of Soybeans . Do not graze or feed Soybean forage, hay or straw to 
livestock.

Page 56 of 71 
 
 
 
Refer to the Imazaquin label for additional precautions, di rections, limitations and information on environmental 
hazards and planting of rotational crops. 
 
SOYBEANS - BURNDOWN WEED CONTROL 
THIS PRODUCT can be used as part of a herbicide program for burndown of existing vegetation prior to crop 
emergence in conservation tillage systems. THIS PRODUCT may be tank-mixed with 2,4-D low volatile ester, 
Paraquat or Glyphosate for control of emerged weeds prior to field Corn or soybean emergence. Tank-mixes of THIS 
PRODUCT with 2,4-DB, Fenoxaprop + Fluazifop (premix), Sethoxydim or Clethodim may also be used in Soybeans 
for control of emerged weeds prior to crop emergence. Burndown tank-mixes of THIS PRODUCT can be applied 
before planting or prior to crop emergence in the following areas:
 
 
Soybeans: 
All areas for all products except Fenoxaprop + Fluazifop (premix) tank-mixes - see Fenoxaprop + Fluazifop (premix) 
tank-mixes of this label for allowed states. 
 
Application: 
THIS PRODUCT may be applied up to 30 days prior to planting or pre-emergence. Apply only by ground equipment 
when THIS PRODUCT is used for burndown of existing vegetation in conservation tillage systems. THIS PRODUCT 
and tank-mix partner burndown rates are listed in the following three tables. 
 
 
SOYBEANS - BURNDOWN RATES OF THIS PRODUCT 
CROP APPLICATION TIMING THIS PRODUCT (Oz./Ac.) 
 
Soybeans Pre-plant (0 to 30 days) 
2 to 5.3 
(0.09 to 0.25 lb. a.i.) Pre-emergence 
 
 
SOYBEANS - BURNDOWN RATES OF THIS PRODUCT PLUS TANK-MIX PARTNER 
PRODUCT Rate/Ac. USE DIRECTIONS AND REMARKS 
THIS PRODUCT 
+ 
2,4-DB 
2 to 5.3 ozs. 
(0.09 to 0.25 lb. a.i.) 
+ 
Labeled rate 
Apply pre-plant or before Soybean emergence. Include nonionic 
surfactant at 2 qts./100 gals. (0.5% v/v) of spray solution. 
THIS PRODUCT 
+ 
2,4-D LVE 
2 to 5.3 ozs. 
(0.09 to 0.25 lb. 
a.i.) 
+ 
Labeled rate 
Apply at least 7 days pre-plant when using 2,4-D LVE at l abeled rates 
and at least 30 days pre-plant with rates greater than 0.5 lb. a.i./Ac. 
Include crop oil concentrate (COC) (e.g., Peptoil) at the rate of 1 
gal./100 gal. of spray solution (1% v/v). 
THIS PRODUCT 
+ 
Fenoxaprop + 
Fluazifop (Premix) 
+ 
2,4-D LVE 
2 to 5.3 ozs. 
(0.09 to 0.25 lb. a.i.) 
+ 
Labeled rate 
+ 
Labeled rate 
For use only in Delaware, Illinois, Indi ana, Iowa, Kansas, Kentucky, 
Maryland, Michigan, Minnesota, Missouri, Nebraska, North Dakota, Ohio, 
Pennsylvania, South Dakota, Virginia, West Virginia and Wisconsin. For 
this tank-mix, follow the plantin g restrictions under the above “Use 
Directions and Remarks” for “THIS PRODUCT + 2,4-D LVE”. Fenoxaprop 
+ Fluazifop (Premix) labeled rates will control certain grasses up to 2, 4 
and 6 inches in height. Include either crop oil concentrate (COC) (e.g., 
Peptoil) at 1 gal./100 gals. (1.0% v/v) or nonionic surfactant (e.g., Surf-AC 
820) at 1 to 2 qts./100 gals. (0.25 to 0. 5% v/v) of spray solution. Refer to 
the 
Fenoxaprop + Fluazifop (Premix) label for additional information.

Page 57 of 71 
 
THIS PRODUCT 
+ 
Sethoxydim 
+ 
2,4-D LVE 
2 to 5.3 ozs. 
(0.09 to 0.25 lb. 
a.i.) 
+ 
Labeled rate 
+ 
Labeled rate 
For this tank-mix, follow the planting restrictions under the “Use 
Directions and Remarks” for “THIS PRODUCT + 2,4-D LVE”. Labeled 
rates of Sethoxydim will control certain grasses up to 2 and 3 inches 
in height. Include either crop oil concentrate (COC) (e.g., Peptoil) at 
the rate of 1 gallon per 100 gallons of spray solution (1% v/v) or 
nonionic surfactant (e.g., Surf-AC 820) at 1 pint per acre. Refer to the 
Sethoxydim label for additional information.
 
THIS PRODUCT 
+ 
Clethodim 
+ 
2,4-D LVE 
2 to 5.3 ozs. 
(0.09 to 0.25 lb. 
a.i.) 
+ 
Labeled rate 
+ 
Labeled rate 
For this tank mix, follow the planting restrictions under the above “Use 
Directions and Remarks” for “THIS PRODUCT + 2,4-D LVE”. Labeled 
rates of Clethodim will control certain grasses up to 3 and 4 inches in 
height. Include crop oil concentrate (COC ) (e.g., Peptoil) at the rate of 1 
qt./Ac. and 28% urea ammonium nitrate (UAN) at a rate of 1 to 2 qts./Ac. 
Refer to the Clethodim label for additional information. 
THIS PRODUCT 
+ 
Paraquat 
2 to 5.3 ozs. 
(0.09 to 0.25 lb. 
a.i.) 
+ 
Labeled rate 
Must be applied prior to crop emergence. See Paraquat label for 
amount to use in relation to weed height. Apply in 20 to 60 gallons of 
water per acre. Include either nonionic surfactant (e.g., Surf-AC 820) 
at 1 qt./100 gals. (0.25% v/v) or crop oil concentrate (COC) (e.g., 
Peptoil) at 1 gal./100 gals. (1% v/v) of spray solution.
 
THIS PRODUCT 
+ 
Paraquat 
+ 
2,4-D LVE 
2 to 5.3 ozs. 
(0.09 to 0.25 lb. 
a.i.) 
+ 
Labeled rate 
+ 
Labeled rate 
For this tank-mix, follow the “Use Directions and Remarks” above for 
“THIS PRODUCT + 2,4-D LVE” and “THIS PRODUCT + Paraquat” 
paying special attention to crop plant ing restrictions with 2,4-D LVE. 
Include either nonionic surfactant (e.g., Surf-AC 820) or crop oil 
concentrate (COC) (e.g., Peptoil) in this tank-mix. 
THIS PRODUCT 
+ 
Glyphosate 
 
2 to 5.3 ozs. 
(0.09 to 0.25 lb. 
a.i.) 
 
+ 
Labeled rate 
Must be applied prior to crop emergence. Use the higher rates as 
weeds approach the maximum weed heights listed in the "Weeds 
Controlled” section below. Apply in 10 to 20 gals. of water per acre. 
With Glyphosate, include nonionic surfactant (e.g., Surf-AC 820) at 2 
qts./100 gals. (0.5% v/v) and ammonium sulfate (spray grade) at 17 
lbs./100 gals. of spray solution. Any Glyphosate formulation 
registered and labeled for use in So ybeans may be tank-mixed with 
THIS PRODUCT.
 
THIS PRODUCT 
+ 
Glyphosate 
+ 
2,4-D LVE 
2 to 5.3 ozs. 
(0.09 to 0.25 lb. 
a.i.) 
+ 
Labeled rate 
+ 
Labeled rate 
For this tank-mix, follow the “Use Directions and Remarks” above for 
“THIS PRODUCT + 2,4-D LVE” and “THIS PRODUCT + 
Glyphosate”, paying special attention to planting restrictions with 2,4-
D LVE. Use the adjuvant directions under the “THIS PRODUCT + 
Glyphosate” tank-mix. Do not use crop oil concentrate (COC). 
 
Use Precautions: 
• Observe all precautions and limitations on the labeling of all products used in tank-mixtures. Refer to the "USE 
INFORMATION" section of this label for additional information, precautions, and limitations. 
• Apply only 2,4-D LVE formulations which are registered and labeled for pre-plant or burndown use in Soybeans. 
 
 
Use Restrictions: 
• Do not apply the above treatments after crop emergence. 
• Do not apply tank-mixtures containing 2,4-D LVE if wind is blowing toward desired susceptible plants (i.e., Cotton, 
Tobacco, Tomato, etc.) or when wind speeds exceed 6 miles per hour. 
 
 
Feeding Restrictions: Soybean vines or hay treated with THIS PRODUCT may be grazed or fed to livestock 40 days after 
application. Do not feed hay , forage, fodder or graze 2,4-D, Clethodim or Fenoxaprop + Fluazifop (premix) treated 
vegetation. Follow the most restrictive pre-harvest interval of all products used in a tank-mixture.

Page 58 of 71 
 
 
Weeds Controlled: 
THIS PRODUCT in tank-mixtures with the above herbicides will provide burndown control of the weeds listed below. 
 
WEEDS CONTROLLED BY BURNDOWN RATES OF THIS PRODUCT 
 
 
Weeds 
Controlled 
 THIS PRODUCT + 
2,4-D LVE Sethoxydim 
+ 
2,4-D 
LVE 
Clethodim 
+ 
2,4-D 
LVE 
Fenoxaprop 
+ Fluazifop 
(Premix) 
+ 
2,4-D 
LVE 
 
Glyphosate 
 
 
Glyphosate 
+ 
2,4-D LVE 
Paraquat 
 
Paraquat 
+ 
2,4-D LVE 
2,4-DB 
DMA 
ANNUAL GRASSES MAXIMUM BURNDOWN HEIGHT (INCHES) 
Barley 
 
 
 
 
 
 
Does not 
control 
these 
species 
- - - 8 4 to 6 
 
 
 
 
Does 
not 
control 
these 
species 
Barnyardgrass 2 to 3 3 to 4 - 6 4 to 6 
Crabgrass spp. 2 to 3 - - 6 4 to 6 
Foxtail spp. 2 to 3 3 to 4 2 to 6 8 4 to 6 
Johnsongrass, 
seedlinq 2 to 3 - - 8 4 to 6 
Panicum, Fall 2 to 3 3 2 to 6 6 4 to 6 
Sandbur, Field - - - 8 4 to 6 
Shattercane 2 to 3 - - 8 4 to 6 
Wheat, Volunteer - - - 6 4 to 6 
Witchgrass 2 to 3 - - 6 4 to 6 
 BROADLEAVES MAXIMUM BURNDOWN HEIGHT (INCHES) 
Buffalobur - 6 6 4 to 6 4 to 6 - 
Chickweed, 
Common 6 6 8 4 to 6 4 to 6 2 
Cocklebur, 
Common 6 6 8 4 to 6 4 to 6 6 
Dandelion, 
Common 6 diaa 2 diab 6 dia a 4 diad 6 diaa 2 dia 
Henbit 4 4 4 4 to 6 4 to 6 - 
Horseweed/ 
Marestail 
6
a,c 4b 6 3 6a 2 c 
Jimsonweed 6 6 6 4 to 6 4 to 6 2 
Kochia* 4
a,c 4 4 4 4 - 
Ladysthumb 6 6 8 4 to 6 4 to 6 3 
Lambsquarters, 
Common 6 6 8 4 to 6 4 to 6 2 
Lettuce, Prickly 6 4 6 4 to 6 4 to 6 2 
Mallow, Venice 6 6 6 4 to 6 4 to 6 - 
Morningglory spp. 6 2 4 2 4 4 
Mustard spp. 6 6 8 4 to 6 4 to 6 2 
Pennycress, Field 6 6 6 4 to 6 4 to 6 2 
Pigweed, spp. 
(annual) 6 6 8 4 to 6 4 to 6 
3 
Ragweed, 
common 6 6b 8 4 to 6 4 to 6 2 
Ragweed, Giant 6a,c 4b 6 4 6 2 
Shepherdspurse 6 6 6 4 to 6 4 to 6 -

Page 59 of 71 
 
Sida, Prickly 6 4 4 4 4 1 
Smartweed, 
Pennsylvania 6 6 8 4 to 6 4 to 6 3 
Sunflower, 
Common 6 6 6 4 to 6 4 to 6 4 
Thistle, Russian 4a,c 2 to 4b,c 6 4 4 to 6 
 3c 
Velvetleaf 6 6 8 4 to 6 4 to 6 3 
Waterhemp spp. 6 6 8 4 to 6 4 to 6 3 
aUse 2,4-D LVE a.i. at 0.5 lb./Ac. 
bUse Glyphosate at a minimum labeled rate. 
cUse THIS PRODUCT at 4 oz./Ac. (0.19 lb. a.i./Ac.) for optimum control. 
dSuppression only. 
*Does not control triazine resistant biotypes. 
 
 
RESIDUAL WEED CONTROL 
Burndown programs with THIS PRODUCT can be used as part of a full season weed control program in Soybeans 
when: 1) applied as a tank-mixture with residual herbicides or 2) followed with a post-emergence weed control 
program, which is registered for use on that crop. 
For residual control, burndown programs with THIS PRODUCT may include tank-mixes with the following herbicides 
or combination of herbicides: 
 
Clorimuron 
Clomazone 
Dimethenamid 
Imazethapyr 
Imazethapyr + Pendimethalin (premix) 
 
Imazaquin 
Imazaquin + Pendimethalin (premix) 
Linuron 
Metolachlor 
 
Pendimethalin 
S-Metolachlor 
THIS PRODUCT* 
 
*THIS PRODUCT used (alone and in tank-mixes) in Soybeans at higher labeled rates than those listed for 
burndown weed control will also provide residual control of those weeds listed in the "WEEDS CONTROLLED 
BY THIS PRODUCT AND TANK-MIX COMBINATIONS OF THIS PRODUCT" table. 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the 
applicable restrictions and limitations and directions for use on all product labels involved in tank-mixing. Users must 
follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
SOUTHERN AND SOUTHEASTERN STATES ONLY - POST-EMERGENCE DIRECTED 
SPRAY APPLICATIONS
 
THIS PRODUCT can be applied in post-emergence directed sprays to Soybeans for control of certain 
weeds which escape pre-plant or pre-emergence herb icide applications and for control of additional 
flushes of weeds that may occur after Soybeans have emerged. Post-emergence directed sprays of THIS 
PRODUCT can be applied to Soybeans in addition to a pre-emergence or pre-plant application of THIS 
PRODUCT herbicide accordi ng to label directions.

Page 60 of 71 
 
Application: 
 
POST-EMERGENCE DIRECTED SPRAY APPLICATIONS 
Crop THIS PRODUCT (Lb./Ac.) 
Soybeans 
(Alabama, Arkansas, Florida, Georgia, Kentucky, 
Louisiana, Mississippi, Missouri, North Carolina, Oklahoma, 
South Carolina, Tennessee and Texas) 
 
0.3 to 0.6 (Broadcast Basis) 
(0.23 to 0.45 lb. a.i.) 
Apply proper dosage using 10 to 40 gallons of water per acre as a directed spray in a 6 to 8 inch band on each 
side of the row after Soybeans are 8 inches tall and before broadleaf weeds are 3 inches tall and before grasses 
and Common Ragweed are 1 inch tall. For best results the spray must cover weed foliage with minimum or no 
contact with Soybean foliage. Add a nonionic surfactant such as Surf-AC 820 to the spray mixture to obtain better 
wetting of weed leaf surfaces. To determine the correct dosage of THIS PRODUCT for a band application, see 
"BANDED APPLICATION" under the 
"USE INFORMATION" section in the front of this label. 
If necessary, a second post-emergence directed spray application can be made after 7 days. 
 
Weeds Controlled: 
THIS PRODUCT applied post-emergence to Soybeans as a directed spray according to directions on this 
label, will control the following weeds at rates shown (broadcast basis) when grasses and Common 
ragweed are less than 1 inch tall and other broadleaves are less than 3 inches tall: 
 
 0.3 Lb. / Ac. (0.23 lb. a.i./Ac.) 
Carpetweed 
 (Mollugo verticillata) 
Cocklebur 
 (Xanthium pensylvanicum) 
Crabgrass 
 (Digitaria spp.) 
Dayflower 
 (Commelina spp.) 
Florida beggarweed 
 (Desmodium tortuosum) 
Mexicanweed 
 (Caperonia castaniifolia) 
Pigweeds 
 (Amaranthus spp.) 
Purslane 
 (Portulaca oleracea) 
Sicklepod 
 (Cassia obtusifolia) 
Velvetleaf 
 (Abutilon theophrastl) 
0.3 to 0.6 Lb./Ac. (0.23 to 0.45 lb. a.i./Ac.) 
Prickly sida/Teaweed 
 (Sida spinosa) 
Sesbania 
 (Sesbania spp.) 
- - 
0.6 Lb. / Ac. (0.45 lb. a.i./Ac.) 
Ragweed, common 
 (Ambrosia artemisiifolia) 
- - - 
At the rate of 0.6 pound (0.45 lb. a.i.) per acre, Florida pusley (Richardia scabra), Horsenettle (Solanum spp.), 
Morningglory species (Ipomoea spp.), Spotted spurge (Euphorbia maculata) and Wild poinsettia (Euphorbia 
heterophylla) are suppressed when THIS PRODUCT is applied before these weeds are 3 inches tall. The 0.6 
pound (0.45 lb. a.i.) per acre rate will suppress broadleaf Signalgrass (Brachiaria platyphylla) up to 1 inch tall. 
 
Use Precautions: 
• To avoid injury to other crops or desirable plants from spray drift, sprayer pressure must not exceed 30 psi and 
the sprayer must be fitted with nozzles no smaller than 8002 T-Jet (or equivalent). 
 
Use Restrictions: 
• Do not apply under weather conditions which favor drift. 
• Do not apply directly to Soybeans or serious crop injury will occur. 
• Do not allow spray to contact more than the lower one-fourth to one-third of Soybean plants. Soybean leaves 
contacted by the spray will be killed. 
• Do not apply THIS PRODUCT post-emergence to sensitive Soybean varieties. 
 
Feeding Restrictions: Do not feed or graze green Soybean vines. Do not harvest Soybeans or use dry Soybean 
vines for feed or foraqe within 70 days of last application.

Page 61 of 71 
 
 
SUGARCANE (Florida Only) 
Post-emergence over-the-top or directed spray applications of THIS PRODUCT may be used for weed control 
in Sugarcane in Florida. 
 
Application: 
 
SUGARCANE APPLICATION DIRECTIONS - FLORIDA ONLY 
THIS PRODUCT 
(Lb. / Ac.) 
USE INSTRUCTIONS 
1.3 to 2.6 
(0.98 to 1.95 lb. a.i.) 
Ground Application: THIS PRODUCT may be used in one or two applications with a minimum 
of 14 days between each application. Apply when weeds are less than 6 inches tall in 10 to 40 
gallons of spray mixture per acre. 
Post-emergence Broadcast or Band: Apply over the top of stub ble or plant cane while 
Sugarcane is less than 14 inches tall. 
Post-emergence Directed Spray: Apply to Sugarcane that is a minimum of 14 inches tall 
and before row closing. 
1.3 to 2 
(0.98 to 1.5 lb. a.i.) 
Aerial Application: Apply when weeds are less than 4 inches tall in 5 to 10 gallons of spray 
mixture per acre. Apply to stubble or plant cane while the Sugarcane is less than 14 inches 
tall. 
 
Weeds Controlled: 
 
Broadleaves 
Amaranth, Spiny (seedling) 
(Amaranthus spinosus) 
Butterweed (Cressleaf 
groundsel) 
 (Senecio glabellus) 
Cudweed 
 (Gnaphalium spp.) 
Purslane 
 (Portulaca oleracea) 
Grasses 
Crabgrass, Large* 
 (Digitaria sanguinalis) 
Foxtail, Bristlegrass 
 (Setaria magna) 
Goosegrass 
 (Eleusine indica) 
Panicum, Broadleaf 
 (Panicum adspersum) 
Signalgrass, Broadleaf 
 (Brachiaria 
platyphylla) 
*Best control is achieved when applications are made when Crabgrass is less than 4 inches in diameter. 
 
THIS PRODUCT Plus AtrazineTank-Mix: THIS PRODUCT may be used with Atrazine as a pre-emergence or post-
emergence (before row closing) application to Sugarcane. Rates for THIS PRODUCT are 1 to 2.6 pounds (0.75 to 
1.95 lb. a.i.) per acre and Atrazine at labeled rates. For additional information on precautions, instructions, limitations, 
application, and weeds controlled, refer to this label and the Atrazine label. 
 
Use Precautions: 
• Spray contact with Sugarcane foliage may result in minor leaf margin chlorosis and/or necrosis. 
• Avoid spray overlaps or variations in application speed that may result in insufficient or excessive rates of 
application. 
 
Use Restrictions: 
• Do not use more than 2.66 pounds per acre of THIS PRODUCT (2.0 lb. a.i./Ac.) in a single growing season. 
• Do not use on sand soils. 
• Do not apply within 60 days of harvest. 
• Do not use treated crop for feed or forage.

Page 62 of 71 
 
 
Sugarcane - Hawaii Only 
THIS PRODUCT, a selective herbicide, is effective as a pre-emergence and an early post-emergence broadcast 
application for control of certain grass and broadleaf weeds . When applied as a spot treatment, it also provides 
excellent control of perennial grasses and broadleaves. 
Ground Application: THIS PRODUCT should be mixed by filling the spray tank half full of clean water. Then add the 
specified amount of THIS PRODUCT to suit the total tank c apacity and the rate of application per acre (preferably 25 
to 35 gallons per acre). Complete filling the tank and maintain sufficient agitation during mixing and spraying to ensure 
a uniform spray mixture. 
Aerial Application: THIS PRODUCT may be used in aerial spray equipment as a pre-emergence or post-emergence 
application to irrigated Sugarcane. Aerial spray equipment should be calibrated to apply the proper amount of THIS 
PRODUCT in 5 to 10 gallons of spray mixture per acre.
 
For aerial and chemigation application methods on Sugarcane, the maximum application rate is 2.66 pounds 
of THIS PRODUCT (2.0 lb. a.i.) per acre. 
 
SUGARCANE BROADCAST APPLICATIONS – HAWAII ONLY 
 THIS PRODUCT 
(Lb. / Ac.) USE INSTRUCTIONS 
2.6 to 5.3 
(1.95 to 3.98 lb. a.i.) 
(Non-irrigated) 
 
5.3 to 8 
(3.98 to 6.0 lb. a.i.) 
(Irrigated) 
Pre-emergence (Irrigated and non-irrigated Sugarcane): Apply specified dosage per 
acre as a broadcast spray to the soil surface. Applications should be made within two 
weeks after planting prior to cane emergence or shortly after emergence (spike stage). 
OR 
Early post-emergence (Irrigated and non-irrigated Sugarcane): Apply specified 
dosage per acre as a broadcast spray over the cane. Application may be delayed as long 
as 4 to 6 weeks after plantinq provided weeds are less than 3 inches in heiqht. 
2.6 to 5.3 
(1.95 to 3.98 lb. a.i.) 
 
OR 
Post-emergence: Apply specified dosage per acre as a broadcast spray to control 
weeds prior to "close in" time when cane shades out the weed growth. 
3.3 to 6.6 
(2.48 to 4.95 lb. a.i.) 
Spot Treatment: Apply specified dosage in 30 to 50 gallons of finished spray per acre. 
Spot treatments may be used to control weeds in missed areas, corners of fields or 
areas of hard-to-control weeds. 
Do not apply more than 10.6 lbs. of THIS PRODUCT (8 lbs. a.i./Ac.) per crop cycle regardless of the method of 
application. The last application may be made up to 17 months of harvest. 
 
Weeds Controlled: 
THIS PRODUCT applied pre-emergence or post-emergence to the Sugarcane as a broadcast spray or spot 
treatment will effectively control the following weeds when less than 3 inches in height. 
 
Weeds Controlled in Irrigated and Non-irrigated Sugarcane 
Broadleaves 
Amaranth, Spiny 
(Amaranthus spinosus) 
Euphorbia, Wild 
 (Euphorbia spp.) 
Fireweed 
 (Erechtites hieracifolius) 
Flora’s paintbrush 
 (Emilia sonchifolia) 
Spurge, Garden 
 (Euphorbia hirta) 
Spurge, Graceful 
 (Euphorbia 
glomerifera) 
Grasses 
Crabgrass 
 (Digitaria spp.) 
Guineagrass 
 (Panicum maximum) 
Plushgrass 
 (Chloris radiata) 
Ricegrass 
 (Oryzopsis hymenoides) 
Wiregrass 
 (Eleusine indica)

Page 63 of 71 
 
Weeds Controlled in Irrigated Sugarcane Only 
Broadleaves 
Amaranth, Spleen 
 (Amaranthus dubius) 
Haole Koa 
 (Leucaena leucocephala) 
Hialoa 
 (Waltheria americana) 
Hilahila 
 (Mimosa pudica) 
Purslane, Common 
 (Portulaca oleracea) 
Rattlepod 
 (Crotalaria 
spectabilis) 
Grasses 
Alexandergrass 
 (Brachiaria plantaginea) 
Bristly foxtail 
 (Setaria verticillata) 
- - 
Weeds Controlled in Non-irrigated Sugarcane Only 
Broadleaves 
Ageratum 
 (Ageratum conyzoides) 
Richardia 
 (Richardia brasiliensis) 
Tarweed 
 (Cuphea carthagenesis) 
- 
 
Use Restrictions: 
• Do not apply more than 10.66 pounds of THIS PRODUCT (8 lbs. a.i.) per acre per crop cycle regardless of the 
method of application. 
• The last application may be made up to 17 months of harvest. 
• Do not use treated foliage for feed or forage. 
 
Sugarcane - Louisiana and Texas Only 
Pre-emergence and post-emergence applications of THIS PRODUCT with aerial or ground spray equipment may be 
used for weed control in Sugarcane in Louisiana and Texas. 
 
SUGARCANE APPLICATION DIRECTIONS - LOUISIANA AND TEXAS ONLY 
THIS PRODUCT * 
(Lb. / Ac.) USE INSTRUCTIONS 
 
2 to 4 
(1.5 to 3.0 lb. a.i.) 
Broadcast: Apply specified dosage per acre using 20 to 30 gallons of water with ground 
equipment or 5 gallons of water with aircraft spray equipment. Apply as a broadcast spray during 
the Fall after planting or to the stubble after harvest. Make a second application early in the Spring. 
 
1 to 2 
(0.75 to 1.5 lb. a.i.) 
Band: Apply specified dosage in 10 to 20 gallons of water per acre in a 30 to 36 inch band over 
the row during the Fall after planting or to the stubble after harvest. Make a second application 
early in the Spring. 
*Use the higher specified rate on heavy clay soil and soil with a high percentage of organic matter. If necessary, a 
third application may be made in late Spring at layby. 
 
Weeds Controlled: 
 
 
Broadleaves 
Amaranth, Spiny 
 (Amaranthus spinosus) 
Bindweed, Field 
 (Convolvulus arvensis) 
Chickweed 
 (Cerastium vulgatum) 
Henbit 
 (Lamium amplexicaule) 
Horseweed/Marestail 
 (Conyza canadensis) 
Lambsquarters 
 (Chenopodium album) 
London rocket 
 (Sisymbrium irio) 
Mustard, Wild 
 (Brassica kaber) 
Pigweeds
 
 (Amaranthus spp.) 
Purslane 
 (Portulaca oleracea) 
Sowthistle 
 (Sonchus spp.) 
Grasses 
Broadleaf Signalgrass 
 (Brachiaria platyphylla) 
Crabgrass 
 (Digitaria spp.) 
Foxtails 
 (Setaria spp.)
 
Johnsongrass, Seedling 
(Sorghum halepense) 
Oats, Winter 
(Avena spp.)

Page 64 of 71 
 
Use Restrictions: 
• Do not apply within 60 days of harvest. 
• Do not use treated foliage for feed or forage. 
 
TOMATOES 
Apply THIS PRODUCT herbicide with ground equipment to seeded and transplanted Tomatoes as specified below. 
Thorough spray coverage on weed foliage is essential for adequate control with post-emergence applications. 
 
Do not use air blast or other high-pressure spray equipment to make post-emergence applications of THIS 
PRODUCT. 
 
Refer to the appropriate section of this label for additional information regarding spray equipment, dilution rates, 
mixing, sprayer cleanup, restrictions, container disposal and precautions. 
 
For specific application information, see the "USE INFORMATION" section in the front of this label. 
 
TOMATOES - BROADCAST APPLICATIONS 
THIS PRODUCT 
(Lb./ Ac.)* 
 
Use Instructions 
0.3 to 0.6 
(0.23 to 0.45 
lb. a.i.) 
Pre-plant Incorporated (Transplant Tomatoes Only): Apply specified dosage in 10 or 
more gallons of water per acre as a broadcast spray to the soil surface immediately before 
transplanting. Incorporate to a depth of 2 to 4 inches with equ ipment capable of uniformly 
mixing the chemical into the soil. This app lication may be made alone or in a tank-mix 
combination with Trifluralin. When transplan ting Tomatoes, place the root system of the 
plants below the herbicide incorporation zone or injury may occur. Refer to the Trifluralin 
label for specific rate of application and for additional precautions and restric tions for 
Tomatoes. 
0.3 to 0.6 
(0.23 to 0.45 
lb. a.i.) 
Post-emergence Broadcast Spray (Established Tomatoes): Apply specified dosage in 
20 or more gallons of water per acre as a broadcast spray or apply in 0.25 to 0.75 inch 
of water (use 0.25 to 0.5 inch of water on sandy soils) per acre as a continuous injection 
in center pivot and lateral move systems or app ly in the last 15 to 30 minutes of set in 
permanent solid set sprinkler systems. One or more applications may be applied per use 
season. Allow at least 14 days between applications or severe crop injury may occur. 
For transplanted Tomatoes, do not apply until transplants have recovered from transplant 
shock and new growth is evident. Do not apply to Tomatoes within 24 hours of application 
of other pesticides. Do not tank-mix with other pesticides. (See "Use Precautions" and 
“Use Restrictions” below.)
 
0.6 to 1.3 
(0.45 to 0.98 
lb. a.i.) 
Post-emergence Directed Spray (Established Tomatoes): Apply specified dosage in 20 
or more gallons of water per acre as a directed spray. One or more applications may be 
applied per use season. Allow at least 14 days between applications or severe crop injury 
may occur. Avoid con acting Tomato foliage with spray. This method of treatment should 
be used for use in fields with a history of severe weed pressure or in fields infested with 
hard-to-control weeds. For transplanted Tomatoes, do not apply until transplants have 
recovered from transplant shock and new growth is evident. Do not apply to Tomatoes 
within 24 hours of application of other pesticides. (See "Use Precautions" and “Use 
Restrictions” below.) When banding, see the appropriate section in front of this label.
 
 *Use the higher specified rate in fields with a history of severe weed pressure and for maximum residual weed 
control.

Page 65 of 71 
 
 
Weeds Controlled: 
 
PRE-PLANT INCORPORATED APPLICATIONS TRANSPLANT TOMATOES ONLY 
Broadcast Sprays – 0.3 to 0.6 Lb./Ac. of THIS PRODUCT (0.23 to 0.45 lb. a.i./Ac.) 
Broadleaves 
Galinsoga 
(Galinsoga spp.) 
 Lambsquarters 
(Chenopodium album) 
Pigweed, Redroot* 
(Amaranthus retroflexus) 
Purslane, Common* 
(Portulaca oleracea) 
Grasses 
Goosegrass (Eleusine indica)* 
Pre-plant incorporated applications applied as directed will suppress Barnyardgrass, Foxtails and Panicums. 
THIS PRODUCT/Trifluralin Tank-mix: This tank-mix combination applied pre-plant incorporated as directed on 
this label will control the weeds listed above plus those weeds listed on the Trifluralin label. 
*For optimum control of these weeds, use the highest specified rate specified for the type of application to be 
made. Repeat post-emergence applications may be needed for best control. 
 
POST-EMERGENCE APPLICATIONS ON ESTABLISHED TOMATOES* 
Broadcast Sprays 0.3 to 0.6 Lb./Ac. of THIS PRODUCT (0.23 to 0.45 lb. a.i./Ac.) 
Broadleaves 
Carpetweed 
 (Mollugo verticillata) 
Fumitory 
 (Fumaria officinalis) 
Galinsoga 
 (Galinsoga spp.) 
Jimsonweed** 
 (Datura stramonium) 
Ladysthumb** 
 (Polygonum persicaria) 
Lambsquarters 
 (Chenopodium album) 
Mustard, Wild 
 (Brassica kaber) 
Pigweeds 
 (Amaranthus spp.) 
Purslane 
 (Portulaca oleracea) 
Ragweed, Common** 
 (Ambrosia artemisiifolia) 
Smartweed, 
Pennsylvania** 
 (Polygonum 
pensylvanicum) 
Toadflax 
 (Linaria spp.) 
Velvetleaf** 
 (Abutilon theophrasti) 
Directed Sprays 0.6 to 1.3 Lbs. of THIS PRODUCT/Ac. (0.45 to 0.98 lb. a.i./Ac.) 
Grasses 
Foxtail, Yellow** 
 (Setaria glauca) 
Goosegrass 
 (Eleusine indica) 
Plus weeds l isted above u nder “Broadcast Sprays” 
 *For effective control of weeds with post-emergence applications, apply THIS PRODUCT before weeds are 1 
inch tall. Post-emergence applications as directed on th is label will also suppress Barnyardgrass and Crabgrass 
when these weeds are less than 1 inch tall. 
**For optimum control of these weeds, use the highest rate specified on the label for the type of application to be 
made. Repeat post-emergence applications may be needed for best control. 
 
Use Precautions: 
• Crop injury or delayed maturity may result from broadcast or directed spray applications if Tomatoes are growing 
under stress conditions such as periods of drought or cool, wet and cloudy weather preceding application. 
• For newly introduced Tomato varieties with unknown tolerance to THIS PRODUCT, treat only a small area to 
determine if THIS PRODUCT can be used without injury to the crop. 
 
Use Restrictions: 
• Do not apply more than a total of 1.33 pounds of THIS PRODUCT (1.0 lb. a.i.) per acre per crop season. 
• Do not apply the total amount of 1.33 pounds of THIS PRODUCT (1.0 lb. a.i.) per acre within a time span of less 
than 35 days, except in the case of directed sprays. 
• Allow at least 14 days between applications, regardless of dosage or method of application or severe crop injury 
may occur.
 
• Do not apply within 7 days of harvest. 
• Do not apply within 3 days after periods of cool, wet or cloudy weather or crop injury will occur. 
• Do not use hot caps on Tomatoes within 7 days before or at any time after application of THIS PRODUCT.

Page 66 of 71 
 
I
• Do not treat seeded Tomatoes until plants have reached the 5 to 6 leaf stage or severe crop injury may occur. 
• DO NOT USE THIS PRODUCT ON TOMATOES IN KERN COUNTY, CALIFORNIA. 
 
 
BENTGRASS GROWN FOR SEED AND ESTABLISHED* PERENNIAL GRASSES 
GROWN FOR SEED 
* Established grasses are those which have been harvested at least once for seed or were planted one year or 
more prior to application. 
 
Weed Control in Established Perennial Bentgrass Grown for Seed - Oregon West of the Cascade 
Mountains and in Crook, Deschutes and Wasco Counties 
 When used as directed below, THIS PRODUCT will reduce competition from seedlings of annual Bluegrass, annual 
Bromus species and annual Ryegrass. THIS PRODUCT will control Chickweed, Henbit, Ivyleaf speedwell, Mustards, 
Rattail fescue and Shepherdspurse. 
 
 
 
Crop 
THIS PRODUCT 
(Lb. / Ac.) 
 
Use Instructions 
Bentgrass grown 
for seed
 
0.38 to 0.5 
(0.29 to 0.38 lb. a.i.) 
 
 
 
 
Apply THIS PRODUCT as a broadcast spray in at least 15 gallons 
of spray solution per acre when volunteer grasses are in the 1 to 2 
leaf growth stage following Fall rainfall or irrigation and before active 
Spring growth. Excessive crop injury and/or failure to control weeds 
may result if application is made after mid-February. Allow at least 
120 days between application and harvest for seed.
 
 
Crop Tolerance: Crop tolerance is marginal and crop injury and yield reduction are possible. Make applications when 
the crop is not under stress to minimize crop injury. Use of adjuvants will reduce crop tolerance. Making the application 
after three consecutive sunny days will reduce the potential for crop injury.
 
 
Use Restrictions: 
• Do not apply more than once per year. 
• Do not apply to a crop that is under stress (i.e., severe insect damage, cool to cold temperatures, disease, nutrient 
deficiency or deficient or excessive moisture). 
• Apply only to Colonial and Creeping Bentgrass. 
• Apply only to established Bentgrass that is at least one year old and has been harvested for seed at least once. 
• Do not tank-mix with other herbicides. 
 
Feeding Restrictions: Do not use the crop or crop residues as feed or livestock bedding for at least 28 days following 
the last application. 
 
Weed Control in Established Perennial Grasses Grown for Seed - Oregon West of the Cascade 
Mountains and in Crook, Deschutes, Jefferson and Wasco Counties 
 
THIS PRODUCT is compatible with most fertilizers, fung icides and insecticides and may be combined with other 
herbicides for enhanced weed control. 
Prior to tank-mixing with another herbicide, refer to the "USE INFORMATION" section of this label or call the 
manufacturer’s representative. Observe all precautions and limitations on labeling of all products used in mixtures.

Page 67 of 71 
 
 
Application: 
 
Crop THIS PRODUCT (Lbs. / Ac.) Use Instructions 
Perennial Ryegrass 
Tall Fescue 
0.3 to 0.75 
(0.23 to 0.56 lb. a.i.) 
Apply specified dosage as a broadcast spray in at least 
15 gallons of spray solution per acre when the 
volunteer grasses are in the 1 to 2 leaf stage following 
Fall rainfall or irrigation but prior to active Spring growth. 
 
Excessive crop injury and/or failure to control weeds may 
result if application is made after mid-February. 
 
Allow at least 120 days between application and harvest. 
Bluegrass 
Fine Fescue 
Orchardgrass 
 
0.3 to 0.5 
(0.23 to 0.38 lb. a.i.) 
 
Weeds Controlled and/or Suppressed: 
When used according to this label, THIS PRODUCT will reduce competition from volunteer seedlings of the indicated 
crop, annual Bluegrass, annual Bromus species and annual Ryegrass. 
 
THIS PRODUCT will control Chickweed, Henbit, Ivyleaf speedwell, Mustards, Rattail fescue and Shepherdspurse. 
 
The addition of wetting agents containing crop oil may enhance control of the volunteer crop and grassy weeds. 
When adding wetting agents, follow the use directions and rates on the wetting agent label. · 
· 
 
Use Restrictions: 
• Do not apply more than once a year. 
• Only apply to established grasses at least 1 year old and harvested for seed at least once. 
• Do not apply THIS PRODUCT through any type of irrigation system. 
• Crop and crop residues may be fed to livestock or used as bedding. If the seed crop is terminated and grazed or cut for 
forage, allow at least 28 days between applications and use as animal feed. 
• Do not apply to a crop that is under stress (i.e., severe insect damage, cool to cold temperatures, disease, nutrient 
deficiency or deficient or extreme moisture). 
 
For Weed Control in Established Perennial Grasses Grown for Seed in Washington 
When used as directed, THIS PRODUCT will reduce competitio n from volunteer seedlings of the listed crop, annual 
Bluegrass, annual Bromus species, and annual Ryegrass. THIS PRODUCT will control Chickweed, Henbit, Ivyleaf 
speedwell, Mustards, Ratta il fescue, and Shepherdspurse. Control of the volunteer crop and grassy weeds may be 
enhanced by adding wetting agents containing crop oil. Follow the directions for use and rates specified on the wetting 
agent label. 
 
Mixing 
This product is compatible with most fertilizers, fungici des, and insecticides. THIS PRODUCT may also be combined 
with other herbicides for enhanced weed control. Before mixing with another herbicide, consult both product labels 
and a knowledgeable authority or Drexel Chemical Company representative. 
 
Application 
 
Crop Rate of This Product (Lbs./Ac.) Use Instructions 
Bluegrass 
Fine Fescue 
 
0.2 to 0.38 
(0.15 to 0.29 lb. a.i.) 
Apply specified dosage as a broadcast spray 
in at least 15 gallons of spray solution per 
acre when volunteer grasses are in the 1 to 
2 leaf growth stage follo wing full rainfall or 
irrigation and before active Spring growth. 
Applications made after mid-February may 
result in excessive crop injury and/or failure to 
control weeds. 
 Allow at least 120 days between 
application and harvest for seed. 
Perennial Ryegrass 
Tall Fescue 
0.3 to 0.5 
(0.23 to 0.38 lb. a.i.)

Page 68 of 71 
 
Use Restrictions: 
• Do not apply more than once a year. 
• Only apply to established grasses that are at least 1 year old and has been harvested for seed at least once. 
• Do not apply THIS PRODUCT through any type of irrigation system. 
• Do not apply to a crop that is under st ress, e.g., disease, severe insect damag e, nutrient deficiency, cool to cold 
temperatures, or deficient or excessive moisture. 
• Do not apply to Bluegrass grasses grown for seed on sand or loamy sand soils. On Bluegrass, use 0.2 to 0.25 pounds 
of this product (0.15 to 0.19 lb. a.i.) per acre if mixing with another herbicide. Use only on soils with organic matter greater 
than 1.5% and a soil pH lower than 7.5. 
• Use only on soils with organic matter greater than 1.5% and a soil pH lower than 7.5. 
 
Feeding Restrictions: The crop and crop residues may be fed to livestock or used as bedding . If the seed crop is 
terminated and grazed or cut for forage, allow at least 28 days between application and use as animal feed. 
 
For Weed Control in Established Perennial Grasses Grown for Seed in Montana and Wyoming 
When used as directed, THIS PRODUCT will reduce competition from Downy brome (Bromus tectorum). 
Control of the grassy weeds may be enhanced by adding wetting agents containing crop oil. 
 
Mixing 
THIS PRODUCT is compatible with most fertilizers, fungicides, and insecticides. THIS PRODUCT may be combined 
with other herbicides for enhanced weed control. Before mixing with another herbicide, consult both product labels 
and a knowledgeable authority or Drexel Chemical Company representative. 
 
Application 
 
Crop Rate of This Product (Lbs./Ac.) Use Instructions 
Meadow brome 
Wheatgrass 
Wildrye 
0.5 
(0.38 lb. a.i.) 
Apply specified dosage as a broadcast spray 
in at least 15 gallons of spray solution per 
acre when the crop is dormant and prior to 
active spring growth. 
Use on sand soils or on soils with pH greater 
than 8.0 may result unacceptable injury. 
Allow at least 120 between application 
harvest for seed. 
 
Use Restrictions: 
• Do not apply more than once a year. 
• Only apply to established grasses that are at least 1 year old and have been harvested for seed at least once. 
• Do not apply this product through any type of irrigation system. 
• Do not apply to a crop that is under stress, e.g., disease, severe insect damage, nutrient deficiency, cool to cold 
temperatures, or deficient or excessive moisture. 
 
Feeding Restrictions: The crop and crop residues may be fed to livestock or used as bedding. If the seed crop is 
terminated and grazed or cut for forage, allow at least 28 days between application and use as animal feed. 
 
ESTABLISHED BERMUDAGRASS TURF – CONTROL OF CERTAIN BROADLEAF 
AND GRASS WEEDS 
 
MIXING 
First fill the spray tank one-fourth to one-third full with cl ean water, then add THIS PRODUCT at the specified rate. Mix 
thoroughly and add water to fill the spray tank. Agitation is necessary during mixing and spraying operations to ensure 
a uniform spray mixture. 
Ensure that the sprayer is accurately calibrated before applying THIS PRODUCT. Avoid boom overlaps that will increase 
dosages above those specified. Check the sprayer frequently during application to be sure if it is working properly and 
delivering a uniform spray pattern.

Page 69 of 71 
 
 
SPRAYER CLEANUP 
Spray equipment must be thoroughly cleaned to remove remaining traces of herbicide that might injure other crops to 
be sprayed. Drain any remaining spray solution of THIS PRODUCT from the spray tank and dispose of according to 
label disposal instructions. Rinse the spray tank and refill with water, adding a heavy-duty detergent at the rate of one 
cup per 20 gallons of water. Recycle this mixture through the equipment for 5 minutes and spray out. Repeat this 
procedure twice. Fill the spray tank with clean water, recycle for 5 minutes and spray out. Clean pump and nozzle 
screens thoroughly. Wash away spray mixture from the outside of spray tank, nozzles or spray rig. All rinse water must 
be disposed of in compliance with local, state and Federal guidelines. 
 
APPLICATION TO ESTABLISHED BERMUDAGRASS (Having a mowing height of 0.5 inch or more) 
 
Dormant Bermudagrass 
Apply when weeds are present and actively growing. Apply 0.66 pound of THIS PRODUCT (0.56 lb. a.i.) in 40 
gallons water per acre as a broadcast spray before green-up of Turf. Observe the "Use Precautions” and “Use 
Restrictions” below when using THIS PRODUCT. 
 
Weeds Controlled: 
 
Broadleaf Weeds (Except California) 
Alkali mallow (a. sida) 
Bedstraw 
Carolina Geranium 
Carpetweed 
Chickweed, Common 
Corn Speedwell 
Henbit 
Hop Clover 
London Rocket 
Nettleleaf Goosefoot 
Parsley-piert 
Prostrate Knotweed 
Red Deadnettle 
Silversheath Knotweed 
Shepherdspurse 
Small-flowered Buttercup 
Spotted Bur clover 
Spotted Spurge 
Spurweed 
White Clover 
Wild Mustard 
Broadleaf Weeds (California Only) 
Alkali mallow (a. sida) 
Carpetweed 
Common Chickweed 
London Rocket 
Nettleleaf Goosefoot 
Shepherdspurse 
Wild Mustard 
 
Actively Growing Bermudagrass 
Apply 0.33 to 0.66 pound of THIS PRODUCT (0.25 to 0.56 lb. a.i.) in 40 gallons of water per acre as a uniform 
broadcast spray. Apply only when turf is vigorously growing and not stressed. Repeat if necessary, but do not apply 
more often than every 7 days. Do not apply more than twice per season to actively growing Bermudagrass. 
Applications may result in temporary discoloration which Turf soon outgrows. Observe the "Use Precautions” and 
“Use Restrictions" below when using THIS PRODUCT. 
 
Weeds Controlled: 
 
Annual bluegrass (Poa annua) 
Goosegrass * 
Littleseed canarygrass Rabbitfootgrass 
 
* Not registered for use in California 
 
Tank-Mixture: 
 
THIS PRODUCT when tank-mixed with spec ified label rates of MSMA applied as directed above to actively growing 
Bermudagrass Turf will effectively control the following weeds. Consult the MSMA label or contact your local Turf extension 
specialist for additional use directions, rates, weed species controlled, precautions and limitations. 
 
Barnyardgrass 
Common Yellow woodsorrel 
Crabgrass 
Dallisgrass 
Nutsedge 
Sandbur 
 
USE PRECAUTIONS 
• Avoid spray overlaps that will increase dosages above those specified. 
• Phytotoxicity may occur if applied within the root zone ar ea of ornamentals, shrubs or trees. Avoid application to 
these areas.

Page 70 of 71 
 
• For best weed control, do not mow treated areas for at least 3 days after treatment. For best results, delay mowing 
until after rainfall or irrigation is received. 
• When applying THIS PRODUCT to Turf which is actively growing, use the lower specified rate in areas where 
soil pH is greater than 7.5. 
 
USE RESTRICTIONS 
• Do not apply by air to Turf. 
• Do not apply THIS PRODUCT to Turf through any type of irrigation system. 
• For application ONLY by commercial applicators and only on established Bermudagrass Turf (including athletic fields, 
cemeteries, golf course fairways and parks) which has a mowing height of 0.5 inch or greater. 
• Not for use in commercial greenhouses, nurseries, on sod farms or on grass grown for seed. For use on plants intended 
for aesthetic purposes or climatic modification and being grown on golf courses or lawns and grounds. 
• Do not apply to dormant Turf in the transitional Bermudagrass growing zones which are or can be expected to be 
adversely affected by cold weather stress. 
• Do not apply using low-pressure and high-volume hand-wand. 
• Do not apply more than 2 pounds of THIS PRODUCT (1.5 lbs. a.i.) per acre in a single growing season. 
• Do not apply more than once to dormant Turf and twice to actively growing Turf in a single growing season. 
• Only apply to established Bermudagrass Turf with a mowing height of 0.5 inch or more. 
• Do not apply to greens, tees, aprons or other Turf which is closely mowed. 
• Do not use grass clippings for animal feed. 
 
 
STORAGE AND DISPOSAL 
Do not contaminate water, food or feed by storage or disposal. 
PESTICIDE STORAGE: Store in a cool, dry place. Store in original container and out of the reach of 
children, preferably in a locked storage area. 
Handle and open container in a manner as to prevent spillage. If the container is leaking or material spilled 
for any reason or cause, carefully sweep material into a pile. Refer to “PRECAUTIONARY STATEMENTS” 
section for hazards associated with the handling of this material. Do not walk through spilled material. 
Dispose of pesticide as directed below. In spill or leak incidents, keep unauthorized people away.
 
PESTICIDE DISPOSAL: To avoid waste, use all materials in this container by application according to label 
directions. If wastes cannot be avoided, offer remaining product to a waste disposal facility or pesticide disposal 
program (often, such programs are run by State or local governments or by industry). 
CONTAINER HANDLING: 
Nonrefillable Container (fl exible-bag-all weights): Nonrefillable container. Do not reuse or refill this container. 
Completely empty bag into application equipment by shaking and tapping sides and bottom to loosen clinging 
particles. Then offer for recycling if available or dispose of empty bag in a sanitary landfill, or by incineration or, if 
allowed by state and local authorities, by burning. If burned, stay out of smoke. 
Nonrefillable Container (rigid-fifty lbs. or less): Nonrefillable container. Do not reuse or refill this container. Offer 
for recycling, if available. Clean cont ainer promptly after emptying. Triple rinse as follows: Empty the remaining 
contents into application equipment or mix tank. Fill the container one-fourth full with water and recap. Shake for 10 
seconds. Pour rinsate into application equipment or mix tank or store rinsate for later use or disposal. Drain for 10 
seconds after the flow begins to drip. Repeat this procedure two more times. Dispose of empty container in a sanitary 
landfill or by incineration or if allowed by State and local authorities, by burning. If burned, stay out of smoke. 
Nonrefillable Container (rigid-greater than fifty lbs.): Nonrefillable container. Do not reuse or refill this container. 
Offer for recycling, if available. Clean container promptly after emptying. Triple rinse as follows: Empty the remaining 
contents into application equipment or mix tank. Fill the container one-fourth full with water. Replace and tighten 
closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. 
Stand the container on its end and tip it back and forth several times. Turn the container over onto its other end and 
tip it back and forth several times. Empty the rinsate into a pplication equipment or mix tank or store rinsate for later 
use or disposal. Repeat this procedure two more times. Dispose of empty container in a sanitary landfill or by 
incineration or if allowed by State and local authorities, by burning. If burned, stay out of smoke.

Page 71 of 71 
 
Refillable Container: Refillable container. Refill this container with pesticide only. Do not reuse this container for any 
other purpose. Cleaning the container before final disposal is the responsibility of the person disposing of the 
container. Cleaning before refilling is the responsibility of the refiller. To clean the container before final disposal, 
empty the remaining contents from this container into application equipment or mix tank. Fill the container about 10 
percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into 
application equipment or rinsate collection system. Repeat this rinsing procedure two more times. 
 
 
WARRANTY—CONDITIONS OF SALE 
OUR DIRECTIONS FOR USE of this product are based upon tests believed reliable. Follow directions carefully. Timing and 
method of application, weather and crop conditions, mixtures with other chemicals not spec ifically directed and other 
influencing factors in the use of this product are beyond the control of the Seller. To the extent consistent with applicable law, 
Buyer assumes all risks of use, st orage and handling of this material not in strict accordance with directions given herewith. 
To the extent consistent with applicable law, in no case shall the Manufacturer or the Seller be liable for consequential, special 
or indirect damages resulting from the use or handling of this product when such use and/or handling is not in strict accordance 
with directions given herewith. The foregoing is a condition of sale by the Seller and is accepted as such by the Buyer. 
 
 
 Manufactured By: 
 
 
 
ME-TRY-BUZIN, PEPTOIL, SURF-AC and the Drexel logo are either trademarks or registered trademarks of Drexel Chemical Company.