Files
crop-chem-docs/corpus/epa_ppls/34704-1138.md
T

3166 lines
202 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# LPI FLUMI 51
- EPA Reg No: **34704-1138**
- Registrant: LOVELAND PRODUCTS, INC.
- Signal word: Caution
- Active ingredients: Flumioxazin (51%)
- Label accepted: 2026-09-28
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/034704-01138-20260928.pdf
---
September 28, 2026
Leah Strayer
Regulatory Consultant for Loveland Products, Inc.
Pyxis Regulatory Consulting, Inc.
535 Dock Street, Suite 211
Tacoma, WA 98402
Leah@PyxisRC.com
Subject: Label Amendment - Registration Review Mitigation for Flumioxazin
Product Name: LPI FLUMI 51
EPA Registration Number: 34704-1138
Case Number: 472552
Application Dates: June 24, 2021
Dear Leah Strayer:
The Agency, in accordance with the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA),
as amended, has completed reviewing all the information submitted with your application to
support the Registration Review of the above referenced product in connection with the
Flumioxazin Interim Decision, and has concluded that your submission is acceptable. The label
referred to above, submitted in connection with registration under FIFRA, as amended, is
acceptable.
Should you wish to add/retain a reference to the company’s website on your label, then please
be aware that the website becomes labeling under the Federal Insecticide, Fungicide, and
Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the
product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E).
40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In
addition, regardless of whether a website is referenced on your product’s label, claims made on
the website may not substantially differ from those claims approved through the registration
process. Therefore, should the Agency find or if it is brought to our attention that a website
contains false or misleading statements or claims substantially differing from the EPA approved
registration, the website will be referred to the EPA’s Office of Enforcement and Compliance
Assurance.
A stamped copy of your labeling is enclosed for your records. This labeling supersedes
all previously accepted labeling and must be used at your next label printing. You must
Page 2 of 2
EPA Reg. No. 34704-1138
Case No. 472552
submit one copy of the final printed labeling before you release the product for
shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may
distribute or sell this product under the previously approved labeling for 12 months
from the date of this letter. After 12 months, you may only distribute or sell this
product if it bears this new revised labeling or subsequently approved labeling. “To
distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation
at 40 CFR 152.3.
If you have any questions about this letter, please contact Stephanie Burkhardt via email at
burkhardt.stephanie@epa.gov.
Sincerely,
Candice Lavelle, Branch Chief
Worker Protection and Intergovernmental Affairs Branch
Pesticide Re-Evaluation Division
Office of Pesticide Programs
ENCLOSURE: Stamped label
{Note to reviewer: [Text] in brackets denotes optional text.}
{Note to reviewer: {Text} in braces denotes where in the final label text will appear.}
{BOOKLET FRONT PANEL LANGUAGE}
1
FLUMIOXAZIN GROUP 14 HERBICIDE
LPI Flumi 51
{Alternate Brand Names:} [Valkos[TM] 51 WDG][FALCO 51 WDG]
FOR CONTROL AND/OR SUPPRESSION OF CERTAIN WEEDS IN ALFALFA, ARTICHOKE, ASPARAGUS, HEAD AND STEM
BRASSICA[*] (CROP GROUP 5-16), BUSHBERRIES (SUB GROUP 13-07B), CACTUS (PRICKLY PEAR)[*], CANEBERRIES, CELERY,
CITRUS, CLOVER, COTTON, CUCURBIT VEGETABLES[*] (CROP GROUP 9), DRY BEANS (CROP GROUP 6C), FIELD CORN, FIELD
PEAS[*], FLAX[*], FRUITING VEGETABLES[*] (CROP GROUP 8), GARLIC, GRAPE, HOPS, LENTILS, MINT, TREE NUTS (CROP
GROUP 14-12), ONION (DRY BULB) (CROP GROUP 3-07A), OLIVE, PEANUT[*], POME FRUIT (CROP GROUP 11-10),
POMEGRANATE, POTATO, SOYBEAN[*], STONE FRUIT ( CROP GROUP 12-12), STRAWBERRY, SUGARCANE[*],
SUNFLOWER[*] AND SAFFLOWER[*], SWEET POTATO, WHEAT[ *], NON-BEARING FRUIT TREES, FALLOW LAND AND TO
MAINTAIN BARE GROUND ON NON-CROP AREAS OF FAR MS, ORCHARDS AND VINEYARDS. [*][NOT FOR USE IN
CALIFORNIA]
ACTIVE INGREDIENT: (% by weight)
Flumioxazin*........................................................................................................................................................................ 51.0%
OTHER INGREDIENTS: ......................................................................................................................................................... 49.0%
TOTAL: ............................................................................................................................................................................... 100.0%
*2-[7-flouro-3,4-dihydro-3-oxo-4-(2-propynyl)-2H-1,4-benzoxazin-6-yl]-4,5,6,7-tetrahydro-1H-isoindole-1,3(2H)-dione
LPI Flumi 51 is a water dispersible granule containing 51% active ingredient.
KEEP OUT OF REACH OF CHILDREN
CAUTION
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you DO NOT understand
the label, find someone to explain it to you in detail.)
See label booklet for additional Precautionary Statements and Directions for Use.
FIRST AID
If inhaled: x Move person to fresh air.
x If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably
mouth-to-mouth if possible.
x Call a poison control center or doctor for further treatment advice.
If on skin or clothing: x Take off contaminated clothing.
x Rinse skin immediately with plenty of water for 15-20 minutes.
x Call a poison control center or doctor for treatment advice.
If in eyes: x Hold eye open and rinse slowly and gently with water for 15-20 minutes.
x Remove contact lenses, if present, after the first 5 minutes, then continue rinsing.
x Call a poison control center or doctor for treatment advice.
If swallowed: x Call a poison control center or doctor immediately for treatment advice.
x Have person sip a glass of water if able to swallow.
x DO NOT induce vomiting unless told to do so by a poison control center or doctor.
x DO NOT give anything by mouth to an unconscious person.
HOT LINE NUMBER
Have the product container or la bel with you when calling a poison control ce nter or doctor, or going for treatment. You
may also contact Rocky Mountain Poison and Drug Safety at 1-866-944-8565 for emergency medical treatment
information.
For Medical Emergencies or for Chemical Spill, Leak, Fire, or Exposure, Call CHEMTREC at 1-800-424-9300.
EPA REG. NO.: 34704-1138 EPA EST. NO.:
Manufactured for:
Loveland Products, Inc.[®]
P.O. BOX 1286
Greeley, Colorado [CO] 80632-1286 [USA]
[internal label code]
[IRRD V1 0ϲ26]
NET WEIGHT:
Sep 28, 2026
34704-1138
{LANGUAGE INSIDE BOOKLET}
2
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION
Harmful if absorbed through skin. Harmful if inhaled. Causes moderate eye irritation. Avoid contact with skin, eyes or
clothing. Avoid breathing dust or spray mist. Wash thor oughly with soap and water after handling and before eating,
drinking, chewing gum, using tobacco or using the toilet. Remove and wash contaminated clothing before reuse.
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Applicators, and other handlers must wear: Long-sleeved shirt and long pants, ch emical-resistant gloves made of any
waterproof material including barrier laminate, butyl rubber t14 mils, nitrile rubber t14 mils, neoprene rubber t14 mils,
natural rubber t14 mils, polyethylene, polyvinyl chloride t14 mils or viton t14 mils, and shoes and socks.
For aerial application to sugarcane, mixer/loaders must also wear: coveralls, chemical resistant apron and chemical resistant
boots. [Not for use in California.]
[DO NOT apply by aerial application to field peas, flax, safflower, sunflower and wheat in California.]
[Not for use on cactus (prickly pear) in California.]
USER SAFETY REQUIREMENTS
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent
and hot water. Keep and wash PPE separately from other laundry.
USER SAFETY RECOMMENDATIONS
Users should:
x Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
x Remove PPE immediately after handling this product. Wash the outside of gl oves before removing. As soon as
possible, wash thoroughly and change into clean clothing.
ENVIRONMENTAL HAZARDS
This product is toxic to non-target plants and aquatic invertebrates. DO NOT apply directly to water, to areas where surface
water is present, or to intertidal areas below the mean high water mark. Drift or runoff may be hazardous to non-target plants
and aquatic organisms in neighboring areas. DO NOT apply where runoff is likely to occur. DO NOT apply when weather
conditions favor drift from treated areas. DO NOT contaminate water when disposing of equipment washwaters or rinsate.
This pesticide is toxic to plants and must be used strictly in accordance with the drift and run-off precautions on this label in
order to minimize off-site exposures.
Under some conditions this product may have a potential to run-off to surface water or adjacent land. Where possible, use
methods which reduce soil erosion, includin g no till, limited till a nd contour plowing; these me thods also reduce pesticide
run-off. Use of vegetation filter strips along rivers, creeks, streams, wetlands or on the downhill side of fields where run-of f
could occur will minimize water run-off and is advised.
NON-TARGET ORGANSIM ADVISORY: This product is toxic to plants and may adversely impact the forage and habitat of non-
target organisms, including pollinators, in areas adjacent to the treated site. Pr otect the forage and habitat of non-target
organisms by following label directions intended to minimize spray drift.
{Note to EPA reviewer: If this product is shipped in contai ners greater than 50 lbs, the following environmental hazard
statement will be added to the label:}
[DO NOT discharge effluent containing this product into lakes, stre ams, ponds, estuaries, oceans, or other waters unless in
accordance with the requirements of a National Pollutant Disc harge Elimination System (NPDES) permit and the permitting
authority has been notified in writing prior to discharge. DO NOT discharge effluent containing this product to sewer systems
without previously notifying the local sewage treatment plant authority. For guidance contact your State Water Board or
Regional Office of the EPA.]
3
PHYSICAL OR CHEMICAL HAZARDS
DO NOT mix or allow coming in contact with oxidizing and reducing agents. A hazardous chemical reaction may occur.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
READ ENTIRE LABEL. USE STRICTLY IN ACCORDANCE WITH LABEL PRECAUTIONARY STATEMENTS AND DIRECTIONS, AND
WITH APPLICABLE STATE AND FEDERAL REGULATIONS.
DO NOT apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected
handlers may be in the area during application. For any require ments specific to your State or Tribe, consult the agency
responsible for pesticide regulation.
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This
Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses,
and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification and emergency
assistance. It also contains specific statements on this la bel about personal protective equipment (PPE), and restricted-
entry interval. The requirements in this box only apply to us es of this product that are covered by the Worker Protection
Standard.
DO NOT enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours.
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves
contact with anything that has been treated, including plants, soil or water is: coveralls, chemical-resistant gloves made of
waterproof material including barrier laminate, butyl rubber t14 mils, nitrile rubber t14 mils, neoprene rubber t14 mils,
natural rubber t14 mils, polyethylene, polyvinyl chloride t14 mils or viton t14 mils, and shoes plus socks.
NON-AGRICULTURAL USE REQUIREMENTS
The requirements in this box apply to uses of this product that are NOT within the scope of the Worker Protection Standard
for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce agricultural plants on
farms, forest, nurseries or greenhouses.
Keep all unprotected persons out of operating a reas, or vicinity where there may be drift. DO NOT enter or allow others
to enter treated areas until sprays have dried.
TANK MIXES
NOTICE: Tank mixing or use of this product with any other product which is not specifically and expressly authorized by
the label shall be the exclusive risk of user, applicator and/or application advisor, to the extent allowed by applicable
law.
It is the pesticide user's responsibility to ensure that all products are registered for the intended use. Read and follow the
applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow
the most restrictive directions for use and precautionary statements of each product in the tank mixture.
{Note to Reviewer: On the final label, throughout the Directions fo r Use and where applicable table headings may be
repeated and/or [(continued)][CONT’D.][Cont’d.] added to indicate where a text group continues to subsequent page.}
RESISTANCE MANAGEMENT
For resistance management, LPI Flumi 51 is a Group 14 herbicide. Any weed population may contain or develop plants
naturally resistant to LPI Flumi 51 and other Group 14 herbicides. The resis tant biotypes may dominate the weed
population if these herbicides are used repeatedly in the same field. Appropriate resistance-management strategies should
be followed.
To delay herbicide resistance take one or more of the following steps:
4
x Rotate the use of LPI Flumi 51 or other Group 14 herbicid es within a growing season sequence or among growing
seasons with different herbicide groups that control the same weeds in a field.
x Use tank mixtures from a different group if such use is permitted; where information on resistance in target weeds
species is available, use the less resistance-prone partner at a rate that will control the target weed(s) equally as well
as the more resistance-prone partner. Consult your local extension service or certified crop advisor if you are unsure
as to which active ingredient is currently less prone to resistance.
x Adopt an integrated weed- management program for herbicide use that includes scouting and uses historical
information related to herbicide use and crop rotation, an d that considers tillage (or other mechanical control
methods), cultural (e.g., higher crop seeding rates; precision fertilizer application method and timing to favor the crop
and not the weeds), biological (weed-competitive crops or varieties) and other management practices.
x Scout after herbicide application to monitor weed populations for early signs of resistance development. Indicators of
possible herbicide resistance include: (1) failure to control a weed species normally controlled by the herbicide at the
dose applied, especially if contro l is achieved on adja cent weeds; (2) a spreading patch of non- controlled plants of a
particular weed species; (3) surviving plants mixed with c ontrolled individuals of the same species. If resistance is
suspected, prevent weed seed produc tion in the affected area by an alternative herbicide from a different group or
by a mechanical method including hoeing or tillage. Prev ent movement of resistant weed seeds to other fields by
cleaning harvesting and tillage equipment when moving between fields, and planting clean seed.
x If a weed pest population continues to progress after treatment with this product, discontinue use of this product, and
switch to another management strategy or herbicide with a different mode of action, if available.
x Contact your local extension specialist or certifie d crop advisors for addi tional pesticide resistance- management
and/or integrated weed-management advice for specific crops and weed biotypes.
x For further information or to report susp ected resistance contact Lov eland Products, Inc. retailer, representative or
call 1-888-LPI-CUST [(574-2878)]. You can also contact your pesticide dist ributor or university extension specialist to
report resistance.
USE INFORMATION
LPI Flumi 51 uses:
x LPI Flumi 51 provides residual control of susceptible weeds.
x LPI Flumi 51 provides additional burndown activity when used as part of a burndown program.
x LPI Flumi 51 can be applied as part of a fall burndown program for control of susceptible winter annuals.
x LPI Flumi 51 can be applied with a hooded or shielded sprayer, as well as part of a layby application, in selected crops for
postemergence weed control as well as residual control of susceptible weeds.
x LPI Flumi 51 can be used on farms, orchards and vineyards for non-selective vegetation control to maintain bare ground
non-crop areas that must be kept weed free.
x It is the pesticide user's responsibility to ensure that all products are registered for the intended use. Read and follow
the applicable restrictions and limitations and directions for use on all product labels inv olved in tank mixing. Users
must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.
LPI Flumi 51, when applied according to label use direction s, will control the weeds claimed in crop specific use
directions. This label makes no claims concerning control of other weed species.
LPI Flumi 51 Rate Summary
OZ. of LPI Flumi 51 Pounds of Flumioxazin
2 0.064
4 0.128
6 0.191
8 0.255
12 0.383
24 0.765
5
Mandatory Spray Drift
Aerial Applications
• DO NOT release spray at a height greater than 10 ft above the vegetative canopy, unless a greater application height
is necessary for pilot safety.
• For all applications, applicators are required to use a medium or coarser spray droplet size (ASABE S641).
• The boom length must not exceed 65% of the wingspan for airplanes or 75% of the rotor blade diameter for
helicopters.
• Applicators must use ½ swath displacement upwind at the downwind edge of the field.
• Nozzles must be oriented so the spray is directed toward the back of the aircraft.
• DO NOT apply when wind speeds exceed 10 miles per hour at the application site.
• DO NOT apply during temperature inversions.
Ground Applications
• Apply with the nozzle height recommended by the manufacturer, but no more than 3 feet above the ground or crop
canopy.
• For all applications, applicators are required to use a medium or coarser spray droplet size (ASABE S572).
• DO NOT apply when wind speeds exceed 10 miles per hour at the application site.
• DO NOT apply during temperature inversions.
Boom-less Ground Applications:
• Applicators are required to use a medium or coar ser droplet size (ASABE S572) for all applications.
• DO NOT apply when wind speeds exceed 10 miles per hour at the application site.
• DO NOT apply during temperature inversions.
Spray Drift Advisories
x THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT.
x BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS.
x IMPORTANCE OF DROPLET SIZE
An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide target pest control.
While applying larger droplets will reduce spray drift, the potential for drift will be greater if applications are made
improperly or under unfavorable environmental conditions.
Controlling Droplet Size - Ground Boom
x Volume - Increasing the spray volume so that larger droplet s are produced will reduce spray drift. Use the highest
practical spray volume for the application. If a greater spray volume is needed, consider using a nozzle with a higher
flow rate.
x Pressure - Use the lowest spray pressure advised for the nozzle to produce the target spray volume and droplet size.
x Spray Nozzle - Use a spray nozzl e that is designed for the intended application. Consider using nozzles designed to
reduce drift.
Controlling Droplet Size - Aircraft
x Adjust Nozzles - Follow nozzle manufacturers recommendati ons for setting up nozzles. To reduce fine droplets,
nozzles should be oriented parallel with the airflow in flight.
• BOOM HEIGHT - Ground Boom
Use the lowest boom height that is compatible with the spray nozzles that will provide uniform coverage. For ground
equipment, the boom should remain level with the crop and have minimal bounce.
• RELEASE HEIGHT - Aircraft
Higher release heights increase the potential for spray drift. When applying aerially to crops, DO NOT release spray at a
height greater than 10 ft above the crop canopy, unless a greater application height is necessary for pilot safety.
• SHIELDED SPRAYERS
6
Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify that the shields
are not interfering with the uniform deposition of the spray on the target area.
• TEMPERATURE AND HUMIDITY
When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation.
• TEMPERATURE INVERSIONS
Drift potential is high during a temperature inversion. Temperature inversions are characterized by increasing
temperature with altitude and are common on nights with limited cloud cover and light to no wind. The presence of an
inversion can be indicated by ground fog or by the movement of smoke from a ground source or an aircraft smoke
generator. Smoke that layers and moves laterally in a co ncentrated cloud (under low wind conditions) indicates an
inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing. Avoid applications
during temperature inversions.
• WIND
Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND CONDITIONS.
Applicators need to be familiar with local wind patterns and terrain that could affect spray drift.
• Boom-less Ground Applications:
Setting nozzles at the lowest effective height will help to reduce the potential for spray drift.
• Handheld Technology Applications:
Take precautions to minimize spray drift.
DO NOT use spray equipment used to apply LPI Flumi 51 to apply other materials to any crop foliage, unless the proper
cleanout procedures are followed. See "SPRAYER CLEANUP" for more information.
ENVIRONMENTAL CONDITIONS AND BIOLOGICAL PERFORMANCE
Preemergence Application (Conventional Tillage)
Important: Crop injury may occur from applications made to poorly drained soils and/or applications made under cool, wet
conditions. Risk of crop injury can be mini mized by using on well drained soils, plan ting at least 1.5 inches deep, using high
quality seed and completely covering seed s with soil prior to preemergence applicati ons. Treated soil that is splashed onto
newly emerged crops may result in temporary crop injury.
Moisture is necessary to activate LPI Flumi 51 in soil for residual weed control. Dry weather following applications of LPI Flumi
51 may reduce effectiveness. However, when adequ ate moisture is received after dry conditions, LPI Flumi 51 will control
susceptible germinating weeds. LPI Flumi 51 may not control weeds that germinate after application but before an activating
rainfall/irrigation or weeds that germinate through cracks resulting from dry soil.
When adequate moisture is not received after a LPI Flumi 51 application, weed control may be improved by irrigation with
at least ¼ inch of water. If emerged weeds are controlled by cultivation, residual weed control will be reduced.
Burndown Application
For best results, apply LPI Flumi 51 as part of a burndown program to actively growing weeds. Applying LPI Flumi 51 under
conditions that DO NOT promote active weed growth will reduce herbicide effectiveness. DO NOT apply LPI Flumi 51 when
weeds are under stress due to drought, excessive water, extremes in temperature, disease or low humidity. Weeds under
stress tend to become less su sceptible to herbicidal action. LPI Flumi 51 is most effective when applied under warm sunny
conditions.
Reduced residual weed control may occur when burndown applic ations are made to fields where heavy crop and/or weed
residue exist.
Postemergence Application
LPI Flumi 51 may only be applied to healthy cr ops labeled for postemergence use. DO NOT apply LPI Flumi 51 to crops that
have been weakened by disease, drought, flooding, excessive fertilization, soil salts, previously applied pesticides, nematodes,
insects or winter injury.
7
Rainfastness
LPI Flumi 51 is rainfast one hour after application. Applications must not be made if rain is expected within one hour of
application or postemergence efficacy may be reduced.
Soil Characteristics
Application of LPI Flumi 51 to soils with high organic matter and/or high cl ay content may require higher dosages than soils
with low organic matter and/or low clay content.
Application to cloddy seedbeds can result in reduced weed control.
HERBICIDE RATE
Residual Weed Control (Including Preemergence Applications or Applications as Part of a Fall or Spring Burndown and
Fallow Seedbed Program)
Based upon soil characteristics (organic matter content and texture), the most di fficult to control weed species being
targeted, and the crop being grown, select the proper LPI Flumi 51 dosage from the rate range tables contained in this label.
CARRIER VOLUME AND SPRAY PRESSURE (Ground Equipment only. See Informati on for Aerial Equipment under "AERIAL
APPLICATION").
Preemergence Application (Conventional Tillage)
To ensure uniform coverage, use 10 to 30 gals. of spray solution per acre for conventional tillage applications. Nozzle selection
must meet manufacturer's gallonage and pressure specifications for preemergence herbicide application.
Burndown Application (Prior to Crop Emergence)
To ensure thorough coverage in burndown applications, use 15 to 60 gals. spray solution per acre. Use 20 to 60 gals. per acre
if dense vegetation or heavy crop residue is present. Nozzle selection must meet manufacturer's gallonage and pressure
specifications for postemergence herbicide application. DO NOT use flood jet nozzles.
Postemergence Application (Emerged Crop)
Check use directions for specific crops in which LPI Flumi 51 can be applied postemergence. To ensure thorough coverage in
burndown applications, use a minimum of 15 gallons spray solution per acre. Use a minimum of 20 gallons per acre if dense
vegetation or heavy crop residue is present. Nozzle selection must meet manufacturer's gallonage and pressure specifications
for postemergence herbicide application.
ADDITIVES
Burndown Application (Prior to Crop Emergence)
Postemergence control of weeds from LPI Flumi 51 tank mixes will require the addi tion of an agronomically approved
adjuvant to the spray mixture. When an adjuvant is to be used with LPI Flumi 51, Loveland Products, Inc. directs the use of a
Council of Producers and Distributors of Agrotechnology (C PDA) certified adjuvant. Either a crop oil concentrate or
methylated seed oil which contains at least 15% emulsifiers and 80% oil or a non-ionic surfactant at 0.25% v/v, may be used
when applying LPI Flumi 51 as part of a burndown program. Some tank mix partners are formulated with sufficient adjuvants
and DO NOT require the addition of a crop oil concentrate, methyl ated seed oil or non-ionic surfactant when tank mixed
with LPI Flumi 51. The addition of a crop oil concentrate or methylated seed oil may increase the burndown activity on certain
weeds including cutleaf evening primrose and Carolina geranium. Verify mixing compatibility qualities by a jar test.
A spray grade nitrogen source (either ammonium sulfate at 2 to 2.5 lbs./A or a 28 to 32% nitrogen solution at 1 to 2 qts./A)
may be added to the spray mixture along with either a crop oi l concentrate, methylated seed oi l or non-ionic surfactant to
enhance weed control. The addition of a nitrogen source does not replace the need for a crop oil concentrate, a methylated
seed oil or a non-ionic surfactant.
JAR TEST TO DETERMINE COMPATIBILITY OF ADJUVANTS AND LPI Flumi 51
When using LPI Flumi 51 and an adjuvant, including in stale seed bed, la yby, hooded/shielded or reduced tillage situations,
perform a jar test before mixing commercial quantities of LPI Flumi 51, when using LPI Flumi 51 for the first time, when using
new adjuvants or when a new water source is being used.
8
1. Add 1 pt. of the water to a quart jar. Use water from the same source and temperature as which will be used in the spray
tank mixing operation.
2. Add 1 g of LPI Flumi 51 to the quart jar for every 3 oz. of LPI Flumi 51 per acre being applied (4 g if 12 oz./A is the desired
LPI Flumi 51 rate), gently mix until product goes into suspension.
3. Add 60 ml (4 Tbsps. or 2 fl. oz.) of the crop oil or methylated seed oil to the quart jar or 1 ml of non-ionic surfactant if it
is being used in place of oil, gently mix.
4. If nitrogen is being used, add 16 ml (1 Tbsp. or 0.5 oz.) of the 28 to 32% nitrog en source to the quart jar. If ammonium
sulfate is being used, add 19 g AMS to the quart jar in place of the 28 to 32% nitrogen.
5. Place cap on jar, invert 10 times, let stand for 15 minutes, evaluate.
6. An ideal tank mix combination will be uniform and free of su spended particles. If any of the following conditions are
observed the choice of adjuvant must be questioned:
a. Layer of oil or globules on the mixture's surface.
b. Flocculation: fine particles in suspension or as a layer on the bottom of the jar.
c. Clabbering: thickening texture (coagulated) like gelatin.
SPRAYER PREPARATION
Before applying LPI Flumi 51, start with clean, well mainta ined application equipment. The sp ray tank, as well as all hoses
and booms, must be cleaned to ensure no residue from the previous spraying operation remains in the sprayer. Some
pesticides, including but not limited to, the sulfonylurea and ph enoxy herbicides, (i.e., chlorimuron and 2,4-D respectively)
are active at very small amounts and can cause crop injury when applied to susceptible crops. The spray equipment must be
cleaned according to the manufacturer's directions for the last product used before the equipment is used to apply LPI Flumi
51. If two or more products were tank mixed prior to LPI Flumi 51 application, follow the most restrictive cleanup procedure.
MIXING INSTRUCTIONS
1. Fill clean spray tank 1/2 to 2/3 of desired level with clean water.
2. If a drift retardant is to be used, add 10 lbs. of spray grade ammonium sulfate per 100 gals. of spray solution.
3. To ensure a uniform spray mixture, pre-slurry the required amount of LPI Flumi 51 with water prior to addition to the
spray tank. Use a minimum of 1 gal. of water per 10 oz. of LPI Flumi 51.
4. While agitating, slowly add the pre-slurried LPI Flumi 51 to the spray tank. Ensure sufficient agitation to create a rippling
or rolling action on the water surface.
5. If tank mixing LPI Flumi 51 with other labeled herbicides, add water sol uble bags first, followed by dry formulations,
flowables, emulsifiable concentrates and then solutions. Prepare no more spray mixture than is required for the
immediate spray operation.
6. Add any required adjuvants.
7. Fill spray tank to desired level with water. Continue agitation until all spray solution has been applied.
8. Mix only the amount of spray solution that can be applied the day of mixing. Apply LPI Flumi 51 within 6 hours of mixing.
SPRAYER CLEANUP
Spray equipment, including mixing vessels and nurse tanks, must be cleaned each day following LPI Flumi 51 application.
After LPI Flumi 51 is applied, the following steps must be used to clean the spray equipment:
1. Completely drain the spray tank, rinse the sprayer thoroughly, including the inside and outside of the tank and all in-line
screens.
2. Fill the spray tank with clean water and flush all hoses, booms, screens and nozzles.
3. Top off tank, add 1 gallon of 3% household ammonia (or equi valent) for every 100 gallons of water, circulate through
sprayer for 5 minutes, and then flush all hoses, booms, screens and nozzles for a minimum of 15 minutes. If diaphragms
are being used on the spray boom, loosen diaphragms before flushing the spray system, allowing cleaning solution to
the spray through the open diaphragm. If spray lines have any end caps, they must be l oosened before flushing the
system, allowing cleaning solution to spray th rough the loosened caps. To enhance removal of LPI Flumi 51 from the
spray system, add a tank cleaner in place of ammonia and allow the cleaning solution to remain in the pressurized spray
system (spray tank, hoses and boom) overnight before flushing the system for a minimum of 15 minutes.
4. Drain tank completely.
5. Add enough clean water to the spray tank to allow all hoses, booms, screens and nozzles to be flushed for 2 minutes.
6. Remove all nozzles and screens and rinse them in clean water.
9
Thoroughly clean all spray equipment, including all tanks, hose s, booms, screens and nozzles, before it is used to apply
postemergence pesticides. Equipment with LPI Flumi 51 residue remaining in the system may result in crop injury to the
subsequently treated crop.
APPLICATION EQUIPMENT
Use only application equipment that is clean and in good repair. Uniformly space nozzles on boom and frequently check for
accuracy.
BROADCAST APPLICATION
Apply LPI Flumi 51, and LPI Flumi 51 tank mixes, with ground equipment using standard commercial sprayers equipped with
flat fan or flood nozzles (preemergence applications only) designed to deliver the desired spray pressure and spray volume.
BAND APPLICATION
When banding, use proportionately less water and LPI Flumi 51 per acre. The rate of LPI Flumi 51 required per acre, when
applied as a banded application, can be calculated with the following formula:
Amount Needed per Acre for
Banded Application = Band Width in Inches
Row Width in Inches X Rate per Broadcast Acre
CHEMIGATION
Follow all label directions for crops regarding rates, timing of application, special instructions and precautions. Refer to th e
onion (dry bulb) and potatoes section of this label for chemigation instructions for these crops.
Apply this product only through center pivot systems. End guns must be turned off due to uneven application. DO NOT apply
this product through any other type of irrigation system.
Crop injury, lack of efficacy or illegal pesticide residues in the crop can result from non-uniform distribution of treated water.
The system must be properly calibrated (with water only) to ensure that the amount of LPI Flumi 51 applied corresponds to
the specified rate.
Apply LPI Flumi 51 in ½ to ¾ inches of water during the first sprinkler set. Allow time for all lines to flush the herbicide through
all nozzles before turning off irrigation water. To ensure the lines are flushed and free of remaining herbicide, a dye indicator
may be injected into the lines to mark the end of the ap plication period. Once chemigation has begun, the run must be
completed to ensure no product is left in system.
If you have any questions about calibrati on, contact your State Extension Service Specialist, equipment manufacturers or
other experts.
Chemigation Restrictions
1. DO NOT connect an irrigation system (including greenhouse systems) used for pesticide application to a public water
system unless the pesticide label-prescribed safety devices for public water systems are in place.
2. A person knowledgeable of the chemigation system and respons ible for its operation or under the supervision of the
responsible person, shall shut the system down and make necessary adjustments if the need arise.
3. The system must be free of leaks and clogged nozzles.
4. The pesticide must be supplied continuously for the dura tion of the aqueous application. An uneven application may
cause injury to the crop or poor weed control.
5. Agitation must be maintained in the nurse tank.
6. The sprinkler chemigation system must contain a functional check valve, vacuum relief valve and low pressure drain
appropriately located on the irrigation pipeline to prevent water source contamination from backflow.
7. The pesticide injection pipeline must contain a functional, au tomatic, quick closing check valve to prevent the flow of
fluid back toward the injection pump.
8. The pesticide injection pipeline must contain a functional, normally closed, solenoid operated valve located on the intake
side of the injection pump and connected to the system interlock to prevent fluid from being withdrawn from the supply
tank when the irrigation system is either automatically or manually shut down.
9. The system must contain functional, interlocking controls to automatically shut off the pesticide injection pump when
the water pump motor stops, or in the case where there is no water pump, when the water pressure decreases to the
point where pesticide distribution is adversely affected.
10
10. The irrigation line or water pump must include a functional pressure switch which will stop the water pump motor when
the water pressure decreases to the point where pesticide distribution is adversely affected.
11. Systems must use a metering pump, for example a positive displacement injection pump (e.g., diaphragm pump),
effectively designed and constructed of materials that are compatible with the pesticides and capable of being fitted
with a system interlock.
12. DO NOT apply when wind speed favors drift beyond the area intended for treatment.
Chemigation Systems Connected to Public Water Systems
1. Public water system means a system for the provision to th e public of piped water for human consumption, if such a
system has at least 15 service connections or regularly serves an average of at least 25 individuals daily at least 60 days
out of the year.
2. Chemigation systems connected to the public water system must contain a functional, reduced pressure zone, backflow
preventer (RPZ) or the functional equivalent in the water supply line upstream from the point of pesticide introduction.
As an option to the RPZ, discharge the water from the pu blic water system into a reservoir tank prior to pesticide
introduction. There shall be a complete physical break (air ga p) between the outlet end of the fill pipe and the top
overflow rim of the reservoir tank of at least twice the inside diameter of the fill pipe.
3. All chemigation systems connected to the public water system must also follow restrictions listed in the preceding section
titled "Special Precautions for Chemigation".
APPLICATION WITH DRY BULK FERTILIZERS
Dry bulk fertilizer may be impregnated or coated with LPI Flumi 51. Application of dry bulk fertilizer with LPI Flumi 51 provides
weed control equal to, or slightly below, the same rate of LPI Flumi 51 applied in liquid carriers, due to better coverage with
application via spray equipment. Follow label directions for LPI Flumi 51 regarding rates, special instructions, cautions and
special precautions. Apply 400 to 700 lbs. of the fertilizer/herbicide mixture per acre to obtain adequate soil coverage. Apply
the mixture to the soil with properly calibrated equipment immediately after blending. Uniform application of the
herbicide/fertilizer mixture is essential to prevent possible crop injury and to obtain uniform weed control.
Ammonium nitrate and/or limestone must not be used as the sole source of fertilizer, as the LPI Flumi 51 may not adhere to
these materials.
Compliance with all Federal and State regulations relating to blending pesticide mixtures with dry bulk fertilizer, registrations,
labeling and application are the responsibility of the individual and/or company offering the fertilizer and LPI Flumi 51 mixture
for sale.
LPI Flumi 51 must be premixed with water to form a slurry prior to impregnation on dry bulk fertilizer. For best results, use a
minimum of 1 pt. of water for each 2 oz. of LPI Flumi 51. Use a minimum of 6 pts. of the LPI Flumi 51 slurry to impregnate
2000 lbs. of the fertilizer for uniform cove rage of the fertilizer. Closed drum, belt , ribbon or other commonly used dry bulk
blenders may be used.
The amount of LPI Flumi 51 required can be calculated with the following formula:
Ounces of LPI Flumi 51 per ton
of fertilizer = ounces of LPI Flumi 51 per acre X 2000 ÷ pounds of fertilizer
per acre
Thoroughly clean dry fertilizer blending equipment after LPI Flumi 51 has been placed in the system to avoid injury to sensitive
crops that may be treated with fertilizers blended after the equipment has been used for LPI Flumi 51. Rinse the sides of the
blender and the herbicide tank with water. Then impregnate the rinsate onto a load of dry fertilizer intended for an approved
crop. Use a maximum rate of 1 gal. of rinsate per ton of fertiliz er. Follow with 1 to 2 loads of unimpregnated fertilizer in th e
blender before switching herbicides.
ROTATIONAL RESTRICTIONS
The following rotational crops may be planted after applying LPI Flumi 51 at the listed rate. Planting earlier than the specified
rotational interval may result in crop injury.
x DO NOT plant any crop, except corn (field), cotton, peanut, soybean, sugarcane and sweet potato earlier than 30 days
after applying LPI Flumi 51.
11
LPI Flumi 51 RATES CROPS ROTATION INTERVALS
1 oz./A Cotton (no-till or strip-till only) 14 days1
1.5 to 2 oz./A Cotton (no-till or strip-till only) 21 days1
2 oz./A or less Peanut, Soybean, Sugarcane and Sweet Potato immediately
Field Corn (minimum and no-till) 7 days
Cotton and Field Corn (conventional tillage), Rice,
Sorghum, Sunflower, Tobacco and Wheat 30 days1
Barley, Dry and Snap Beans, Flax, Peas, Rye, Safflower
and Sweet Corn 3 months
Alfalfa, Canola, Clover, Oats, Potato, Sugar Beet and all
other crops not listed2
4 months if soil is tilled prior to planting
8 months if no tillage is performed
Lentil 6 months
Up to 3 oz./A Peanut, Soybean, Sugarcane and Sweet Potato immediately
Field Corn (minimum and no-till) 14 days
Field Corn (conventional tillage) and Sorghum 30 days1
Cotton, Rice, Sunflower, Tobacco and Wheat 2 months1
Barley, Dry and Snap Beans, Flax, Pea, Rye, Safflower and
Sweet Corn 4 months
Alfalfa, Clover, Oats, Potato, Sugar Beet 5 months if soil is tilled prior to planting
10 months if no tillage is performed
Canola and all other crops not listed2 6 months if soil is tilled prior to planting
12 months if no tillage is performed
Lentil 7 months
Raised beds only: Head and Stem Brassica except
Cabbage
2 month (if the top 4 inches of the beds
have been removed)
Up to 4 oz./A Sugarcane Immediately
Alfalfa, Canola, Potato, Sugar Beet and all other crops not
listed2
6 months if soil is tilled prior to planting
12 months if not tillage is performed
Cotton, Field Corn, Peanut, Rice, Sorghum, Soybean,
Sunflower, Tobacco and Wheat 4 months
Raised beds only:
Cabbage, melon, pepper and tomato[3]
2 months (if the top 4 inches of the beds
have been removed)
6 to 12 oz./A Cotton Field Corn, Peanut, Rice, Sorghum, Soybean,
Sunflower, Tobacco and Wheat 9 months
Alfalfa, Canola, Sugar Beet and all other crops not listed2
Trees can be transplanted 2 months after application of
LPI Flumi 514
12 months if soil is tilled prior to
planting
18 months if no tillage is performed
1 At least one inch of rainfall/irrigation must occur between application and planting or crop injury may occur.
2 Successful soil bioassay must be performed prior to planting these crops.
3 [Arizona, California and Hawaii only : For fallowbed application on transplant ed cabbage, melon, pepper and tomato
beds refer to directions for use found in this label.]
4 Transplanted avocado, bushberries (including blueberry), caneberries, citrus fruit, fig, grape, nut trees, olive, pome fruit,
pomegranate and stone fruit can be planted 2 months after a LPI Flumi 51 application of 2 to 12 oz./A.
12
Table 1. Broadleaf Weeds Controlled by Residual Activity of LPI Flumi 51 Herbicide
BROADLEAF WEED SPECIES
SECTION A
COMMON NAME SCIENTIFIC NAME
ORGANIC
MATTER SOIL TYPE LPI Flumi 51
HERBICIDE RATE
Carpetweed Mollugo verticillata Up to 5%
All Soil Types
2 oz./A
Chickweeds
Common Stellaria media
Mouseear Cerastium vulgatum
Dandelion Taraxacum officinale
Eclipta Eclipta prostrata
Eveningprimrose, Cutleaf Oenothera laciniata
Field Pennycress[1] Thlaspi arvense
Florida Pusley Richardia scabra
Henbit Lamium amplexicaule
Lambsquarters, Common Chenopodium album
Little Mallow Malva parviflora
Marestail/Horseweed Conyza canadensis
Mayweed/False Chamomile Matricaria maritima
Nightshades
Black Solanum nigrum
Eastern Black Solanum ptycanthum
Hairy Solanum sarrachoides
Pigweeds
Redroot Amaranthus retroflexus
Smooth Amaranthus hybridus
Spiny Amaranth Amaranthus spinosus
Tumble Amaranthus albus
Prickly Lettuce Lactuca serriola
Prickly Sida (Teaweed) Sida spinosa
Puncturevine Tribulus terrestris
Purslane, Common Portulaca oleracea
Radish, Wild Raphanus raphanistrum
Redmaids Calandrinia ciliata var menziessii
Shepherd's-purse Capsella bursa-pastoris
Smallflower Morningglory Jacquemontia tamnifolia
Sowthistle, Prickly Sonchus asper
Spotted Spurge Euphorbia maculata
Venice Mallow Hibiscus trionum
[ 1 Except CA.]
13
Table 1. Broadleaf Weeds Controlled by Residual Activity of LPI Flumi 51 Herbicide (continued)
SECTION B
All weeds listed in Section A plus:
COMMON NAME SCIENTIFIC NAME
ORGANIC
MATTER SOIL TYPE LPI Flumi 51 RATE 2
Coffee Senna Cassia occidentalis Up to 3% All Soil Types 2 oz./A Cotton and Dry
Bean
2.5 oz./A Field Corn and
Soybean[*]
3 oz./A Peanut[*] and all
other labeled crops
Common Ragweed1 Ambrosia artemisiifolia
False Chamomile[4] Tripleurospermum maritima
Florida Beggarweed Desmodium tortuosum
Golden Crownbeard Verbesina encelioides
Hairy Indigo Indigofera hirsuta
Hemp Sesbania Sesbania exaltata 3 to 5% Coarse and
Medium Soils;
(sandy loam,
loamy sand,
loamy, silt-loam,
silt, sandy clay,
sandy clay loam)
2 oz./A Cotton and Dry
Bean
2.5 oz./A Field Corn and
Soybean[*]
3 oz./A Peanut[*] and all
other labeled crops
Jimsonweed Datura stramonium
Kochia Kochia scoparia
London Rocket[4] Sisymbrium irio
Morningglories3
Entireleaf Ipomoea hederacea var. integriuscula
Ivyleaf Ipomoea hederacea
Red/Scarlet Ipomoea coccinea
Tall Ipomoea purpurea
Mustard, Wild Brassica kaber
Palmer Amaranth Amaranthus palmeri
Spurred Anoda Anoda cristata Fine Soils: (silty
clay, silty clay
loam, clay, clay
loam)
2 oz./A Cotton and Dry
Bean
2 oz./A Field Corn,
Peanut[*], Soybean[*]
and all other labeled
crops
Tropic Croton Croton glandulosus
Waterhemps1
Common Amaranthus rudis
Tall Amaranthus tuberculatus
Wild Poinsettia Euphorbia heterophylla
Yellow Rocket[4] Barbarea vulgaris
1 A postemergence herbicide, including lactofen, or glyphosate (Roundup Ready® soybeans only) may be needed following
a preemergence application of LPI Flumi 51 to adequately control common ragweed or waterhemp in soybean fields
with heavy pressure.
2 Due to differences in crop canopy timing between peanuts and soybeans, use 3 oz./A of LPI Flumi 51 in peanuts,
regardless of soil type and organic matter content, except in the states of [California,] North Carolina, Oklahoma and
Virginia (refer to the DIRECTIONS FOR USE IN PEANUT section of this label). [LPI Flumi 51 will provide residual control of
these weeds at 2 oz./A when applied under a cotton canopy.]
3 Morningglory species are not adequately controlled on fine soils or soils with greater than 3% organic matter.
[4] [Except CA.]
[*][Not for use in California.]
14
Table 2. Weeds Suppressed by Residual Activity of LPI Flumi 51
BROADLEAF WEED SPECIES
COMMON NAME SCIENTIFIC NAME ORGANIC MATTER OUNCES PER ACRE
Bristly Starbur Acanthospermum hispidum Up to 5%
2 to 3
Copperleaf, Hophornbeam Acalypha ostryifolia
Ragweed, Giant Ambrosia trifida
Russian Thistle Salsola iberica
Smartweeds
Ladysthumb Polygonum persicaria
Pennsylvania Polygonum pensylvanicum
Smellmelon[1] Cucumis melo
Velvetleaf Abutilon theophrasti
Wild Buckwheat Polygonum convolvulus
Wormwood, Biennial Artemisia biennis
GRASS WEED SPECIES
Barnyardgrass Echinochloa crus-galli
Bluegrass, Annual Poa annua
Crabgrass, Large Digitaria sanguinalis
Foxtail, Giant Setaria faberi
Goosegrass Eleusine indica
Lovegrass, California Eragrostis diffusa
Panicums
Fall Panicum dichotomiflorum
Texas Panicum texanum
Ryegrass, Italian Lolium multiflorum
Signalgrass, Broadleaf Brachiaria platyphylla
Cheat Bromus secalinus 1.5 to 3
Downy Brome[1] Bromus tectorum
[1][Except CA.]
DIRECTIONS FOR USE IN FALL AND SPRING PREPLANT BURNDOWN AND FALLOW SEEDBED
PROGRAMS IN FIELD CORN, PEANUT AND SOYBEAN
(Preemergence to Crop)
For Use in the States of Arizona, California and Hawaii Only
RESTRICTIONS
x DO NOT apply to frozen or snow covered soil.
x DO NOT perform any tillage operation after application or residual weed control will be reduced.
x Observe all rotational intervals prior to planting as listed in the "ROTATIONAL RESTRICTIONS" table.
x DO NOT apply more than 4 oz. of LPI Flumi 51 (0.128 lb a.i.) per acre per single application.
x DO NOT apply more than 4 oz. of LPI Flumi 51 (0.128 lb. a.i.) per acre per year.
x DO NOT make more than one fall burndown and fallow seedbed application per year.
x DO NOT make more than one spring burndown application per year.
x DO NOT make more than 2 applications per year.
FALL BURNDOWN AND FALLOW SEEDBED PROGRAMS
LPI Flumi 51, at 2 to 4 oz./A can be used in the fall to provide residual weed control in fields that will be planted the following
spring with field corn, peanut or soybea n (refer to Rotational Restrictions table for rates and rotational intervals prior to
planting). Weeds controlled by residual ac tivity are listed in Table 1 (sections A and B), Broadleaf Weeds Controlled by
Residual Activity of LPI Flumi 51; Table 3, Weeds Controlled by Fall and Spring Preplant Bu rndown Programs; and Table 7,
Weeds Controlled by Residual Activity of LPI Flumi 51. If weeds have emerged at the time of application, use LPI Flumi 51 in
15
combination with a labeled burndown herbicide. [Application must be made no earlier than October 15 in Region 2 or
November 15 in Region 1 or when soil temperature falls below 50°F at a 2 inch depth to maintain residual weed control into
the spring (April 1 in Region 1 and May 1 in Region 2) or up until planting, whichever comes first.] LPI Flumi 51 can be used in
a fall burndown or fallow seedbed program [outside of Regi ons 1 and 2], however the length of residual control may be
variable.
Abnormally warm or wet winters will reduce the length of weed control observed in the spring.
[Fall Application Regions:
Region 1: Alabama, Arkansas, Georgia, Kentucky, Mississippi, Oklahoma, Tennessee and Virginia
Region 2: Delaware, Kansas, Illinois, Indiana, Iowa, Maryland, Michigan, Minnesota, Missouri, Nebraska, North Dakota, Ohio,
Pennsylvania, South Dakota, West Virginia and Wisconsin]
Weeds controlled by postemergence or residual activity are listed in Table 3. Prep lant burndown treatment tank mixes and
rates are:
Herbicide Rate
Program11
LPI Flumi 51 2 to 3 oz./A
Plus
glyphosate 0.5 to 1.0 lb. ai/A
Plus
2,4-D LVE (2,4-D for use on preplant soybeans only) 0.5 to 1.0 ai/A
Plus
NIS + AMS 0.5% v/v + 17 lbs./100 gals of water
or
Program21
LPI Flumi 51 2 to 3 oz./A
Plus
glyphosate 0.5 to 1.0 lb. ai/A
Plus
COC2
or
NIS + AMS
1pt/A
or
0.5% v/v + 17 lbs/100 gals of water
or
Program31
LPI Flumi 51 2 to 3 oz./A
Plus
2,4-D LVE (2,4-D for use on preplant soybeans only) 0.5 to 1.0 ai/A
Plus
COC 1 pt/A
1 The labeled rate of Dicamba can be added to Programs 1, 2 & 3 to assist in the control of emerged broadleaves. Refer to
dicamba label for rotational restrictions.
2 Crop oil concentrate has been found to increase glyphosate burndown of emerged cutleaf eveningprimrose and Carolina
geranium.
16
Table 3. Weeds Controlled by Fall and Spring Preplant Burndown Programs
WEEDS CONTROLLED1 POSTEMERGENCE RESIDUAL
COMMON NAME SCIENTIFIC NAME
Program 1 Program 2 Program 3
Weeds 3 Inches or Less
Chamomile, False Matricaria maritime Yes Yes No Yes
Cheatgrass Bromus tectorum Yes Yes No Yes
Chickweed, Common Stellaria media Yes Yes No Yes
Chickweed, Mouseear Cerastium vulgatum Yes Yes No Yes
Cockle, White Silene latifolie No Yes Yes Yes
Dandelion Taraxacum officinale Yes No Yes2 Yes
Deadnettle, Purple Lamium purpureum Yes Yes Yes Yes
Groundsel, Cressleaf Senecio glabellus Yes Yes - Yes
Henbit Lamium amplexicaule Yes Yes Yes Yes
Kochia Kochia scoparia Yes Yes Yes Yes
Marestail/Horseweed Conyza canadensis Yes Yes3 Yes Yes
Mallow, Common Malva neglecta Yes Yes No Yes
Prickly Lettuce Lactuca serriola Yes Yes Yes Yes
Wormwood, Biennial Artemisia biennis Yes Yes Yes Yes
Weeds 12 Inches or Less
Canola, Volunteer Brassica napus Yes Yes Yes Yes
Carolina Geranium Geranium carolinianum Yes Yes Yes -
Eveningprimrose, Cutleaf4 Oenothera laciniata Yes Yes Yes Yes
Flixweed Descurainia Sophia Yes Yes Yes Yes
Mustard, Tansy Descurainia pinnata Yes Yes Yes Yes
Mustard, Wild Brassica kaber Yes Yes Yes Yes
Shepherd's-purse Capsella bursa-pastoris Yes Yes Yes Yes
1 Refer to glyphosate and/or 2,4-D labels for additional weeds controlled and rotational restrictions.
2 Use the labeled rate of 2,4-D LVE for control of emerged dandelion.
3 Program 2 will not control emerged glyphosate resistant marestail/horseweed.
4 Use Program 1 to control cutleaf eveningprimrose that are nearing 12 inches in height or are past the rosette stage. Use
Programs 2 or 3 to control cutleaf eveningprimrose that are 12 inches or less and in the rosette stage.
SPRING BURNDOWN PROGRAMS
LPI Flumi 51 can be used in combination with labeled preplant burndown herbicides to assist in the postemergence burndown
of emerged weeds and provide residual weed control prior to crop emergence. Weeds controlled by residual activity are
listed in Table 1.
No-till planters that incorporate the soil during planting may result in decreased weed control in the row. Apply LPI Flumi 51
after planting peanuts and soybeans when these types of planters are used (within 3 days after planting soybeans, within 2
days after planting peanuts and before the crop emerges). LPI Flumi 51 cannot be applied after planting field corn.
LPI Flumi 51 can be used at 1 to 3 oz./A with labeled preplant burndown herbicides to enhance the speed of burndown and
increase weed spectrum.
LPI Flumi 51 can be used at 1 to 3 oz./A in field corn, peanut and soybean burndown programs. See "DIRECTIONS FOR USE
IN FIELD CORN", "DIRECTIONS FOR USE IN PEANUT", "DIRECTIONS FOR USE IN SOYBEAN" for more information.
DIRECTIONS FOR USE IN FALL AND SPRING BURNDOWN PROGRAMS IN COTTON AND
SUGARCANE[*]
For Use in the States of Arizona, California and Hawaii Only
[*][NOT FOR USE ON SUGARGANE IN CALIFORNIA]
17
RESTRICTIONS
x DO NOT apply to frozen or snow covered soil.
x DO NOT perform any tillage operation after application or residual weed control will be reduced.
x A minimum of 30 days must pass, and 1 inch of rainfall/irrigation must occur, between LPI Flumi 51 application and
planting of conventionally tilled cotton.
x A minimum of 14 days must pass, and 1 inch of rainfall/irrigation must occur, between LPI Flumi 51 application and
planting of no-till or strip-till cotton when a LPI Flumi 51 rate of 1 oz./A is used and 21 days when a LPI Flumi 51 rate of
1.5 to 2 oz./A is used. The field must contain the stubble from the previous crop.
x DO NOT apply more than 4 oz. of LPI Flumi 51 (0.128 lb a.i.) per acre per single application.
x DO NOT apply more than 4 oz. of LPI Flumi 51 (0.128 lb. a.i.) per acre per year.
x DO NOT make more than one fall burndown application per year.
x DO NOT make more than one spring burndown application per year.
x DO NOT make more than 2 applications per year.
LPI Flumi 51 can be used at 1 to 2 oz./A with labeled burndown he rbicides to enhance the speed of burndown and increase
weed spectrum. LPI Flumi 51 can be applied as part of a burndown application to sugarcane until cane emergence. Observe
all rotational intervals prior to planting as listed in the "ROTATIONAL RESTRICTIONS" table. Refer to most restrictive label for
minimum interval between application and planting.
FALL BURNDOWN PROGRAMS
LPI Flumi 51, at 2 to 4 oz./A, can be used in the fall to provide residual weed control in fields that will be planted the following
spring with cotton or sugarcane (refer to Rotational Restrictions table for rates and rotational intervals prior to planting).
Weeds controlled by residual activity are listed in Table 1 and Table 7. If weeds have emerged at the time of application, use
LPI Flumi 51 in combination with a labeled burndown herbicide. [A pplication must be made no earlier than October 15 in
Region 2 or November 15 in Region 1 or when soil temperature falls below 50°F at a 2 inch depth to maintain residual weed
control into the spring (April 1 in Region 1 and May 1 in Region 2) or up until plan ting, whichever comes first.] [LPI Flumi 51
can be used in a fall burndown or fallow seedbed program outside of Regions 1 and 2.]
Abnormally warm or wet winters will reduce the length of weed control observed in the spring.
SPRING BURNDOWN PROGRAMS
LPI Flumi 51 , at 1 to 2 oz./A, can be used in combination with la beled preplant burndown herbicides to assist in the
postemergence burndown of emerged weeds and provide residual weed control prior to crop em ergence in fields that will
be planted with cotton or sugarcane. Weeds controlled by residual activity are listed in Table 1.
No-till planters that incorporate the soil during planting may result in decreased weed control in the row.
DIRECTIONS FOR USE IN FALL AND SPRING BURNDOWN PROGRAMS IN RICE,
SORGHUM, SUNFLOWER, TOBACCO AND WHEAT
(Preplant to Crop)
For Use in the States of Arizona, California and Hawaii Only
RESTRICTIONS
x DO NOT apply to frozen or snow-covered soil.
x DO NOT perform any tillage operation after application or residual weed control will be reduced.
x A minimum of 30 days must pass, and 1 inch of rainfall/irrigation must occur, between LPI Flumi 51 application and
planting of rice, sorghum, sugarcane, sunflowers, tobacco or wheat. Refer to most restrictive label for minimum interval
between application and planting.
x DO NOT make more than one fall burndown application per year.
x DO NOT make more than one spring burndown application per year.
x DO NOT make more than 2 applications per year.
x DO NOT apply more than 4 oz. of LPI Flumi 51 (0.128 lb a.i.) per acre per year.
18
LPI Flumi 51 can be used at 1 to 2 oz./A with labeled burndown he rbicides to enhance the speed of burndown and increase
weed spectrum. Observe all rotational intervals prior to planting as listed in the "ROTATIONAL RESTRICTIONS" table.
FALL BURNDOWN PROGRAMS
LPI Flumi 51 can be used in combination with labeled burndown programs to control emerged weeds and provide residual
weed control in fields that will be planted the following spring (refer to Rotational Restrictions table for rates and rotational
intervals prior to planting). [Application must be made no earlier than October 15 in Region 2 or November 15 in Region 1 or
when soil temperature falls below 50°F at a two inch depth to maintain residual weed control into the spring.]
Abnormally warm winters may reduce the length of weed control observed in the spring.
SPRING BURNDOWN PROGRAMS
LPI Flumi 51 can be used in combination with labeled burndown programs to control emerged weeds and provide residual
weed control prior to crop emergence. Weeds controlled by residual activity are listed in Table 1 Section A. Crops that will be
planted following application must be in compliance with the rotational interval listed in the “Rotational Restriction” table
above.
No-till planters that incorporate the soil during planting may result in decreased weed control in the row.
DIRECTIONS FOR USE IN FALL BURNDOWN PROGRAMS IN FIELDS TO BE PLANTED TO
BARLEY, FIELD PEA, FLAX, LENTIL, SAFFLOWER, SUNFLOWER AND SPRING WHEAT
(Preplant to Crop)
For Use in the States of Arizona, California and Hawaii Only
RESTRICTIONS
x DO NOT apply to frozen or snow-covered soil.
x DO NOT perform any tillage operation after application or residual weed control will be reduced.
x LPI Flumi 51 can be mixed with 2,4-D and/or glyphosate formulations labeled for burndown programs (preplant to crop)
in accordance with the most restrictive label limitations and precautions. Labeled application rates cannot be exceeded.
DO NOT mix LPI Flumi 51 with any product containing a label prohibition against such mixing.
x DO NOT apply more than 4 oz. of LPI Flumi 51 (0.128 lb a.i.) per acre per single application.
x DO NOT apply more than 4 oz. of LPI Flumi 51 (0.128 lb. a.i.) per acre per year.
x DO NOT make more than one fall burndown application per year.
Observe all rotational intervals prior to planting as listed in the "ROTATIONAL RESTRICTIONS" table.
FALL BURNDOWN PROGRAMS
LPI Flumi 51 can be used at 2 to 4 oz./A with labeled burndown herbicides to enhance the speed of burndown, increase weed
spectrum and provide residual weed control of the weeds listed in Table 3 until the following spring. Rotational intervals must
be followed for crop to be planted in the spring following the fall LPI Flumi 51 application. Refer to most restrictive label for
minimum interval between application and planting.
DIRECTIONS FOR USE IN FALLOW LAND
For Use in the States of Arizona, California and Hawaii Only
RESTRICTIONS
x DO NOT apply more than 4 oz. of LPI Flumi 51 (0.128 lb. a.i.) per single application.
x DO NOT apply more than 4 oz. of LPI Flumi 51 (0.128 lb. a.i.) per acre per year.
x DO NOT make more than one fall fallow field application per year.
x DO NOT make more than one spring fallow field application per year.
x DO NOT make more than 2 applications per year.
LPI Flumi 51 may be used as a preemergence fallow treatment. Weeds controlled by residual activity are listed in Table 1.
19
LPI Flumi 51 , at 2 to 4 oz./A, can be used in the fall to provide res idual weed control in fallow fields (refer to Rotational
Restrictions table for rates and rotational intervals prior to plan ting). If weeds have emerged at the time of application, use
LPI Flumi 51 in combination with a labeled fallow herbicide. [Application must be made no earlier than October 15 in Region
2 or November 15 in Region 1 or when soil temperature falls below 50°F at a 2 inch depth to maintain residual weed control
into the spring (April 1 in Region 1 and May 1 in Region 2).] Abnormally warm or wet winters will reduce the length of weed
control observed in the spring.
LPI Flumi 51 , at 1 to 4 oz./A, can be used in sp ring in combination with labeled bu rndown herbicides to control emerged
weeds and provide residual weed control.
DIRECTIONS FOR USE IN ESTABLISHED ALFALFA
RESTRICTIONS
x DO NOT apply more than 4 oz. of LPI Flumi 51 (0.128 lb. a.i.) per acre during a single application.
x DO NOT apply more than 8 oz. of LPI Flumi 51 (0.255 lb. a.i.) per acre per year.
x DO NOT make more than 2 applications per year.
x DO NOT make a sequential LPI Flumi 51 application within 60 days of the first LPI Flumi 51 application.
x DO NOT apply to alfalfa with greater than 6 inches of growth. Application will result in burning of treated leaves and
stems.
x DO NOT apply within 25 days of harvest or grazing.
x Only apply with an adjuvant or tank mi x with products formulated as an emulsi fiable concentrate "EC" when targeting
control of emerged weeds (crop burn and/or st unting must be expect ed and accepted if LPI Flumi 51 is used with an
adjuvant, a tank mix partner formulated as an emulsifiable concentrate (EC) or a tank mix partner formulated with an
adjuvant.)
x DO NOT use on intended mixed alfalfa-grass stands.
x Application with paraquat can be used to burndown winter annuals prior to winter dormant period.
TIMING TO ALFALFA
LPI Flumi 51 may be applied to established alfalfa with a maximum amount of growth of 6 inches or less for the preemergence
control of the weeds listed in Table 7, Weeds Controlled by Residual Activity of LPI Flumi 51. Established alfalfa is defined as
alfalfa planted in the fall or spring whic h has gone through a first cu tting/mowing. Application to alfalfa with greater than 6
inches of growth may result in unacceptable crop injury.
For control of winter annual weeds: the best timing for preemergence control is in the fall immediately after the last cutting
or sheeping-off has occurred.
For control of summer annual weeds: the best timing for preemergence control is in the spring prior to alfalfa growth and
before 6 inches of growth.
TIMING TO WEEDS
Preemergence - Preemergence to Weeds
Apply LPI Flumi 51 before alfalfa growth exceeds 6 inches in height for the preemergence control of weeds listed in Table 7,
Weeds Controlled by Residual Activity of LPI Flumi 51. Make applications as soon as possible after cutting and removing alfalfa
to minimize injury to alfalfa growth.
Postemergence Dodder Suppression[*]
Apply LPI Flumi 51 at 4 oz. per acre with an adjuvant for postemergence suppression of dodder. Tank mixes with imazethapyr,
ammonium salt or imazamox will increase control. [*][Not for use in California.]
20
DIRECTIONS FOR USE IN ARTICHOKE
RESTRICTIONS AND LIMITATIONS
x DO NOT apply more than 4 oz./A of LPI Flumi 51 (0.128 lb. a.i.) per acre during a single application on annual or perennial
artichoke varieties after new planting.
x DO NOT apply more than 6 oz./A of LPI Flumi 51 (0.191 lb. a.i.) per acre during a single application on perennial artichoke
varieties after cutback.
x DO NOT apply more than 6 oz. of LPI Flumi 51 (0.191 lb. a.i.) per acre per year.
x DO NOT make more than 1 application per year.
x Application to artichoke foliage may result in unacceptable crop injury.
TIMING TO ARTICHOKE
Annual Varieties: LPI Flumi 51 may be applied to artichoke beds prior to transplanting. Application of LPI Flumi 51 must be
made to the beds no later than 2 days prior to transplanting. Irrigation or rainfall after transplanting is necessary to activate
LPI Flumi 51. DO NOT irrigate the LPI Flumi 51 transplanting. Heavy irrigation or rainfall may result in crop injury. The injury
is usually transitory and the plants will quickly grow out of the crop damage. Take care to minimize soil disturbance during
transplanting, as preemergence weed control will decrease as soil disturbance increases.
Perennial Varieties: LPI Flumi 51 may be applied to artichokes after planting of crown pieces of "cut back" of mature plants.
Applications of LPI Flumi 51 must be made within 2 days after planting or cut back and prior to artichoke emergence.
Application after the artichokes have begun to crack, or are emerged, will result in crop injury. Application may not be made
when artichokes have begun to emerge (cracking).
TIMING TO WEEDS
Pre-plant (annual)/Preemergence (perennial) to Artichokes - Preemergence to Weeds
Apply LPI Flumi 51 pre-plant to annual artichokes for preemergence cont rol of the weeds. For perennial artichokes apply
before cracking for preemergence control of weeds. Make application prior to weed emergence. A post-emergence herbicide
may be necessary to control emerged weeds. LPI Flumi 51 may be applied to annual or p erennial artichokes as specified
above for preemergence control of weeds listed in Table 7, Weeds Controlled by Residual Activity of LPI Flumi 51.
DIRECTIONS FOR USE IN ESTABLISHED ASPARAGUS
RESTRICTIONS
x DO NOT apply more than 6 oz. of LPI Flumi 51 (0.191 lb. a.i.) per acre during a single application.
x DO NOT apply more than 6 oz. of LPI Flumi 51 (0.191 lb. a.i.) per acre per year.
x DO NOT make more than 1 application per year.
x Apply only to dormant asparagus no less than 14 days before spears emerge. Application to non-dormant asparagus may
result in unacceptable crop injury.
x [DO NOT work soil within 60 days prior to application in the spring. Soil can be worked after spear harvest in preparation
for LPI Flumi 51 application prior to fern emergence. Treated soil that is splashed onto the ferns may result in spotting.]
TIMING TO ASPARAGUS - Dormant
LPI Flumi 51 may be applied to dormant asparagus for preemergence control of the weeds listed in Table 10, Weeds
Controlled by Preemergence Application of LPI Flumi 51. Application to non-dormant aspara gus will result in unacceptable
crop injury. Make applications no less than two weeks prior to spear emergence and must be sprinkler or rainfall incorporated
with 0.5 to 0.75 inches of water or some scoring may result.
TIMING TO ASPARAGUS - Post Harvest
Apply LPI Flumi 51 after the final harvest of the season, but prior to fern emergence, for preemergence control of the weeds
listed in Table 10, Weeds Controlled by Preemergence Application of LPI Flumi 51. Application after fern emergence will result
in unacceptable crop injury. Apply no less than two weeks prior to fern emergence and must be sprinkler or rainfall
21
incorporated with 0.5 to 0.75 inches of water. Add a burndown tank mix partner for the control of emerged weeds labeled
for asparagus in accordance with the most restrictive labeled limitations and precautions.
TIMING TO WEEDS
Burndown - Dormant Asparagus, Postemergence to Weeds
LPI Flumi 51 may be used for residual weed contro l, as well as to assist in postemergence burndown of many annual and
perennial weeds where asparagus is dormant. For control of emerged weeds, tank mix LPI Flumi 51 with paraquat. Refer to
paraquat label for specified rate and application parameters. To ensure thorough coverage, use a minimum of 15 gals. of
spray solution per acre. LPI Flumi 51 tank mixes applied to assist in the contro l of emerged weeds must be applied with a
non-ionic surfactant at 0.25% v/v. A spray grade nitrogen source (either ammonium sulfate at 2 to 2.5 lbs./A or 28 to 32%
nitrogen solution at 1 to 2 qts./A) may be added to increase herbicidal activity.
Burndown - After Last Harvest of Season, Postemergence to Weeds
Use LPI Flumi 51 for residual weed control and to assist in postemerg ence burndown for many annual and perennial weeds
where asparagus harvest has been completed for the year. For control of emerged weeds, use a labeled tank mix partner
with activity on the emerged weeds.
Preemergence - Dormant Asparagus or After Last Harvest of Season, Preemergence to Weeds
Apply LPI Flumi 51 to dormant asparagus for the preemergence control of weeds listed in Table 10, Weeds Controlled by
Preemergence Application of LPI Flumi 51.
DIRECTIONS FOR USE IN BRASSICA HEAD AND STEM VEGETABLE GROUP 5-16[*]
Includes: Broccoli; Brussels Sprouts; Cabbage; Cabbage, Chinese, na pa; Cauliflower, cultivars, varieties, and/or hybrids of
these.
[*][NOT FOR USE IN CALIFORNIA]
FOR DISTRIBUTION AND USE ONLY WHERE THIRD PARTY INDEMNIFICATION IS IN EFFECT
ROW MIDDLES
RESTRICTIONS
x DO NOT apply after crops are transplanted.
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb. a.i.) per acre during a single application. For Cabbage DO NOT
apply more than 4 oz. of LPI Flumi 51 (0.128 lb. a.i.) per acre during a single application.
x DO NOT apply more than 6 oz. of LPI Flumi 51 (0.191 lb. a.i.) per acre per year. For Cabbage, DO NOT apply more than 8
oz. of LPI Flumi 51 (0.255 lb. a.i.) per acre per year.
x DO NOT make more than 2 applications per year.
x Minimum Retreatment Interval: 30 days.
PRECAUTIONS
x LPI Flumi 51 can only be applied in row middles between raised plastic mulched beds that are at least 4 inches higher
than the treated row middle and the mulched bed must have a minimum of a 24-inch bed width.
x Spray must remain between raised beds and contact no more than the bottom 1 inch of the side of the raised bed.
x All applications must be made with shielded or hooded equipment.
x Efficacy will be reduced if LPI Flumi 51 is applied to areas of standing water within the row middles.
x Injury can occur if soil particles treated with LPI Flumi 51 contact the crop.
x Irrigate treated field after application and prior to transpla nting with minimum of ¼ inch of water if rainfall does not
occur between application and transplanting.
TIMING TO CROP
LPI Flumi 51 may be applied at 3 oz. per acre (except cabbage may be applied at 4 oz./A) as a shielded or hooded application
to row middles after plastic is laid up to transplanting or seeding. Transplanting or seeding can take place any time after spray
has dried. Spray must be applied to the row middle and contact no more than approximately the bottom 1 inch of the side of
22
the raised bed. If the top of the mulch be ds (where plants are to be transplanted) is contacted, severe injury can occur due
to foliage contact with treated plastic.
WEED CONTROL AND TANK MIXING
LPI Flumi 51 provides preemergence residual control of the weeds listed in Table 7, Weeds Controlled by Residual Activity of
LPI Flumi 51, as well as to assist in the postemergence control of emerged weeds. A registered preemergence grass herbicide
may be added for control of additional grassy we eds. For control of emerged weeds, tank mix LPI Flumi 51 with paraquat,
carfentrazone-ethyl, glyphosate, or other registered burndown herbicide. Refer to tank mix partner label for specified rates
and application parameters.
DIRECTIONS FOR USE ON CACTUS (PRICKLY PEAR)[*]
[*][NOT FOR USE IN CALIFORNIA]
RESTRICTIONS
x DO NOT apply more than 12 oz. of LPI Flumi 51 (0.383 lb. a.i.) per acre during a single application.
x DO NOT apply more than 12 oz. of LPI Flumi 51 (0.383 lb. a.i.) per acre per year.
x DO NOT make more than 2 applications per year.
x Use a maximum LPI Flumi 51 rate of 6 oz./A (0.191 lb. a.i.) per application on any soil that has a sand plus gravel content
over 80% if plants are less than 3 years of age.
x Two applications of 6 oz./A (0.191 lb. a.i.) in a 12 month peri od can still be made as long as there have been 60 days
between applications.
x DO NOT apply to farm alleys or roads where traffic may result in treated dust settling onto crops or other desirable
vegetation.
x DO NOT mow treated areas. Dust created by mowing may drift onto desirable vegetation resulting in injury.
x DO NOT apply within 60 days prior to harvest.
x DO NOT apply to plants established less than one year.
PRECAUTIONS
x Raise mower height during all mowing to reduce dust. Dust created by mowing can drif t onto desirable vegetation
resulting in injury.
x Follow the most restrictive label limitations and precautions of the tank mix product(s) being used.
x Avoid direct or indirect spray contact to foliage.
Apply LPI Flumi 51 as a uniform broadcast application to the plantation floor or as a uniform band directed at the base of
the cactus. The preferred application timing for LPI Flumi 51 is in the fall to maximize the potential for rainfall to activate and
set the herbicide. DO NOT apply over the top of crop or allow spray to come in contact with crop as a result of application or
drift.
Preemergence Application
Apply 6 to 12 oz. (0.188 to 0.38 lb ai/A) of LPI Flumi 51 per broadcast acre as a preemergence application. LPI Flumi 51
applications must be made prior to weed emergence for control of weeds listed in Table 10, Weeds Controlled by
Preemergence Application of LPI Flumi 51. Make preemergence (to weed emergence) applications of LPI Flumi 51 to a weed-
free soil surface. Preemergence application of LPI Flumi 51 must be completed prior to weed emergence. Moisture is
necessary to activate LPI Flumi 51 on soil for residual weed control. Dry weather following application of LPI Flumi 51 may
reduce effectiveness. However, when adequate moisture is received after dry conditions, LPI Flumi 51 will control susceptible
germinating weeds.
Postemergence Application
Apply 6 to 12 oz. (0.188 to 0.38 lb ai/A) of LPI Flumi 51 per broadcast acre plus an adjuvant (0.25% v/v non-ionic surfactant
or 1 qt/A crop oil concentrate). The addition of an adjuvant enhances LPI Flumi 51 activity on emerged weeds. Thorough
spray coverage is necessary to maximize the postemergence activity of LPI Flumi 51.
Refer to Table 13, Broadleaf Weeds Controlled by Residual Activity of LPI Flumi 51 for weeds controlled by the residual activity
of LPI Flumi 51. LPI Flumi 51 may be tank mixed with a labeled burndown herbicide for control of the emerged weeds.
23
Residual weed control will be reduced if vegetation prevents the LPI Flumi 51 from reaching the soil surface. If vegetation is
heavy, it is advised to use a burndown herbicide with LPI Flumi 51 and make a sequential LPI Flumi 51 application prior to
the emergence of new weeds.]
Carrier Volume and Spray Pressure
To ensure thorough coverage in burndown applications, use a mini mum of 15 gallons of spray solution per acre. Use higher
gallonage if dense vegetation or heavy crop residue is present.
Nozzle selection must meet manufacturer's gallonage and pressure specifications.
Banded Application
Rates listed in Table 13, Weeds Controlled by Postemergence Activity of LPI Flumi 51 Tank Mixes , refer to a broadcast
application covering the entire acre. Re fer to the Band Application table in Us e Information Section to calculate amount
needed per acre when making a banded application.
DIRECTIONS FOR USE IN CELERY
For Use in the States of California, Michigan and Wisconsin Only
RESTRICTIONS
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb. a.i.) per acre during a pre-transplant application.
x [In the state of California, use as a pre-transplant application only.]
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb. a.i.) per acre during a post-transplant application.
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb. a.i.) per acre per year.
x DO NOT make more than 1 application per year.
x DO NOT use with an adjuvant.
x Post transplant applications must be made between 3 to 7 days following transplanting.
x DO NOT apply as part of a tank mix.
TIMING TO CELERY
Apply LPI Flumi 51 at 3 oz/A prior to transplanting, or between 3 and 7 days following transplanting, for preemergence control
of the weeds listed in Table 1, Broadleaf Weeds Controlled by Residual Activity of LPI Flumi 51.
TIMING TO WEEDS
Use LPI Flumi 51 prior to weed emergence for residual control.
It is the pesticide user's responsibility to ensure that all products are registered for the intended use. Read and follow the
applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must
follow the most restrictive directions for use and precautionary statements of each product in the tank mixture. LPI Flumi
51, when applied according to label use directions, will control the weeds listed in Table 1, Broadleaf Weeds Controlled by
Residual Activity of LPI Flumi 51. This label makes no claims concerning control of other weed species.
DIRECTIONS FOR USE IN CLOVER
For Use in Idaho, Oregon and Washington Only
RESTRICTIONS
x DO NOT apply more than 4 oz. of LPI Flumi 51 (0.128 lb. a.i.) per acre during a single application.
x DO NOT apply more than 4 oz. of LPI Flumi 51 (0.128 lb. a.i.) per acre per year.
x DO NOT make more than 1 application per year.
x DO NOT apply within 25 days of harvest or grazing.
x DO NOT apply to clover with greater than 6 inches of growth. Application will res ult in burning of treated leaves and
stems.
x DO NOT use on intended mixed clover-grass stands.
24
PRECAUTIONS
x Only apply with an adjuvant or tank mi x with products formulated as an emulsi fiable concentrate "EC" when targeting
control of emerged weeds (expect and accept crop may be burned and/or stunting when applying tank mixes of LPI Flumi
51 with an adjuvant).
x Application with paraquat can be used to burndown winter annuals prior to winter dormant period.
x Application to clover with greater than 6 inches of growth may result in unacceptable crop injury.
TIMING TO CLOVER
LPI Flumi 51 may be applied to established clover with a maximum amount of growth of 6 inches or less for the preemergence
control of the weeds listed in Table 7, Weeds Controlled by Residual Activity of LPI Flumi 51. Established clover is defined as
clover planted in the fall or spring which has gone through a first cutting/mowing.
For control of winter annual weeds: the best timing for preemergence control is in the fall immediately after the last cutting
or sheeping-off has occurred.
For control of summer annual weeds: the best timing for preem ergence control is in the spri ng prior to clover growth and
before 6 inches of growth.
TIMING TO WEEDS
Preemergence - Preemeergence to Weeds
Apply LPI Flumi 51 before clover growth exceeds 6 inches in height for the preemergence control of weeds listed in Table 7,
Weeds Controlled by Residual Activity of LPI Flumi 51. Make applications as soon as possible after cutting and removing clover
to minimize injury to clover growth.
Postemergence Dodder Suppression
Apply LPI Flumi 51 at 4 oz. per acre with an adjuvant for postemergence suppression of dodder. Tank mixes with imazethapyr,
ammonium salt or imazamox will increase control.
DIRECTIONS FOR USE IN COTTON
For Use in the States of Arizona, California and Hawaii Only
RESTRICTIONS
x DO NOT apply more than 2 oz. of LPI Flumi 51 (0.064 lb. a.i.) per acre during a single application.
x DO NOT apply more than 4 oz. of LPI Flumi 51 (0.128 lb. a.i.) per acre per year.
x DO NOT make more than 2 applications per year.
x DO NOT make a sequential LPI Flumi 51 application within 30 days of the first LPI Flumi 51 application.
x DO NOT apply within 60 days of harvest.
ENVIRONMENTAL CONDITIONS AND BIOLOGICAL PERFORMANCE
Hooded, Shielded and Layby Application
For best results, apply LPI Flumi 51 to actively growing weeds within the growth stages indicated in this label. Applying LPI
Flumi 51 under conditions that DO NOT promote active weed growth will reduce herbicide effectiveness. DO NOT apply LPI
Flumi 51 when the crop or weeds are under stress due to drought, excessive water, extremes in temperature, disease or low
humidity. Weeds under stress tend to become less susceptible to herbicidal action. LPI Flumi 51 is most effective when
applied under sunny conditions at temperatures above 65°F.
LPI Flumi 51 is rainfast one hour after application. Applications must not be made if rain is expected within one hour of
application or postemergence efficacy may be reduced. Rainfall within one hour of application will not adversely affect
residual activity.
25
HERBICIDE RATE
Hooded, Shielded and Layby Application
For postemergence weed control, apply LPI Flumi 51 through a hooded or shielded sprayer or at layby, at 2 oz/A, in
combinations with MSMA or at 1 to 2 oz/A in combination with glyphosate, to assist in the control of weeds listed in Table 4.
Residual weed control can also be obtained through hooded, shielded and layby application of LPI Flumi 51. Weeds that are
controlled through residual activity of LPI Flumi 51 are listed in Table 1. Weeds that are suppressed by residual activity of LPI
Flumi 51 are listed in Table 2.
Table 4. Emerged Broadleaf Weeds Controlled by Hooded, Shielded and Layby Application of LPI
Flumi 51 Tank Mixes with Glyphosate or MSMA in Cotton
BROADLEAF WEED SPECIES WEED HEIGHT (inches) 2 oz./A COMMON NAME SCIENTIFIC NAME
Bindweed, Field1 Convolvulus arvensis 4
Carpetweed Mollugo verticillata 4
Chickweed, Common Stellaria media 4
Cocklebur, Common Xanthium strumarium 4
Florida Beggarweed Desmodium tortuosum 2
Hemp Sesbania Sesbania exaltata 6
Jimsonweed Datura stramonium 4
Lambsquarters, Common Chenopodium album 4
Morningglories
Entireleaf Ipomoea hederacea var. integriuscula 4
Ivyleaf Ipomoea hederacea 4
Pitted Ipomoea lacunose 4
Red Ipomoea coccinea 4
Tall Ipomoea purpurea 2
Mustard, Wild Brassica kaber 6
Nightshades
Black Solanum nigrum 4
Eastern Black Solanum ptycanthum 4
Hairy Solanum sarrachoides 4
Pigweeds
Palmer Amaranth Amaranthus palmeri 4
Redroot Amaranthus retroflexus 4
Smooth Amaranthus hybridus 4
Plaintain, Broadleaf Plantago major 6
Prickly Sida (Teaweed) Sida spinosa 4
Purslane, Common Portulaca oleracea 2
Ragweeds
Common Ambrosia artemisiifolia 2
Giant Ambrosia trifida 4
Rice Flatsedge Cyperus iria 2
Sicklepod Senna obtusifolia 4
Smartweeds
Ladysthumb Polygonum persicaria 4
Pale Polygonum lapathifolium 4
Pennsylvania Polygonum pensylvanicum 4
Spotted Spurge Euphorbia maculata 4
Velvetleaf Abutilon theophrasti 4
Venice Mallow Hibiscus trionum 2
26
BROADLEAF WEED SPECIES WEED HEIGHT (inches) 2 oz./A COMMON NAME SCIENTIFIC NAME
Waterhemps
Common Amaranthus rudis 2
Tall Amaranthus tuberculatus 2
1 LPI Flumi 51 tank mixes will control the above ground portion of field bindweed. Repe ated applications will be needed
to control regrowth.
CARRIER VOLUME AND SPRAY PRESSURE
Hooded, Shielded and Layby Application
To ensure thorough coverage in hooded, shielded and layby app lications, use 15 to 30 gals spray solution per treated acre.
Use 20 to 30 gals per treated acre under heavy weed pressure. Nozzle selection mu st meet manufacturer's gallonage and
pressure specifications for application method being used. DO NOT use "Flood Jet" nozzles, as they tend to increase the
chance of crop injury.
ADDITIVES
Hooded, Shielded and Layby Application
Weed control from hooded, shielded or layby application of LPI Flumi 51 in cotton requires the addition of an agronomically
approved non-ionic surfactant to the spray mixture. Non-ionic surfactant must contain at least 80% active ingredient. Verify
mixing compatibility qualities by a jar test. The use of crop oil concentrates, methylated seed oils, organo-silicant surfactants
or products containing these ingredients, may result in severe crop injury and must not be used.
APPLICATION EQUIPMENT
Apply LPI Flumi 51 tank mixes, with ground equipment using standard commercial sprayers equipped with nozzles designed
to deliver the desired spray pressure and spray volume. Use only application equipment that is clean and in good repair.
Nozzles must meet manufacturer's specifications for spray pattern and placement on spray boom and must be checked
frequently for accuracy.
TIMING TO COTTON
Hooded and Shielded Application
LPI Flumi 51 tank mixes may be applied with a hooded or shielded sprayer after cotton has reached a minimum of 6 inches
in height. All nozzles must be under the hood or behind the shield to ensure no spray solution comes in contact with the
cotton. Care must be taken to ensure the spra y solution or drift does not come in co ntact with the cotton or severe crop
injury can occur.
Layby Application
Layby application of LPI Flumi 51 tank mixes may be made once cotton has reached a minimum of 16 inches in height. Cotton
that is smaller than 16 inches in height may be injured by LPI Flumi 51 applications. LPI Flumi 51 application must be directed
to the lower 2 inches of the cotton stem to avoid crop injury.
TIMING TO WEEDS
LPI Flumi 51 tank mix application must be made to weeds within the height range given in Table 4.
TANK MIXES
LPI Flumi 51 must be tank mixed with one of the herbicides listed in Table 5 for postemergence control of the weeds listed in
Table 4.
27
Table 5. Tank Mixes with LPI Flumi 51 for Hooded, Shielded and/or Layby Use in Cotton
TANK MIX PARTNER TARGET WEEDS HOODED AND SHIELDED LAYBY
glyphosate Perennial Grasses and Broadleaves X X1
MSMA Annual Grasses
Yellow Nutsedge
X X
1 For use only in cotton with the Roundup Ready gene.
DIRECTIONS FOR USE IN CUCURBIT VEGETABLES[*]
[*][NOT FOR USE IN CALIFORNIA]
Cucurbit Vegetables (Crop Group 9) including: chayote (fruit); Chinese Waxgourd (Chinese preserving melon); citron melon;
cucumber; gherkin; gourd; edible (includes hyotan, cucuzza, hechima, Chinese okra); Momordica spp. (includes balsam apple,
balsam pear, bittermelon, Chinese cucumber); muskmelon (includes cantaloupe); pumpkin; squash, summer; squash, winter
(includes butternut squash, calabaza, hubbard squash, acorn squash, spaghetti squash); watermelon
Many weather related factors, including high wind or heavy rains or cool conditions at or near crop transplanting, may result
in crop injury in fields treated with this product. On occasion, this has resulting in a delay in maturity.
It is the pesticide user's responsibility to ensure that all products are registered for the intended use. Read and follow the
applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must
follow the most restrictive directions for use and precautionary statements of each product in the tank mixture. LPI Flumi
51, when applied according to label use directions, will control the weeds listed in Table 7, Weeds Controlled by Residual
Activity of LPI Flumi 51. This label makes no claims concerning control of other weed species.
RESTRICTIONS
x DO NOT apply more than 4 oz. of LPI Flumi 51 (0.128 lb. a.i.) per acre during a single application.
x DO NOT apply more than 8 oz. of LPI Flumi 51 (0.255 lb. a.i.) per acre per year.
x DO NOT make more than 2 applications per year.
x Minimum Retreatment Interval: 30 days.
FOR DISTRIBUTION AND USE ONLY WHERE THIRD PARTY INDEMNICATION IS IN EFFECT
ROW MIDDLES
RESTRICTIONS
x DO NOT use with an adjuvant.
x Spray must be directed to the row middle, away from the crop bed and with minimal contact with plastic, including the
sides of the bed. If top of mulch beds (where plants are to be transplanted) is contacted, severe injury can occur due to
foliage contact with treated plastic. In this scenario, a rainfall event of 1/2 inch (natural or irrigation) must occur prior to
transplanting to reduce LPI Flumi 51 residues.
x Does not occur between application and transplanting.
x All applications must be made with hooded or shielded equipment.
PRECAUTIONS
x Grow plants on raised plastic mulched beds that are higher than the treated row middle.
x Drift of treated soil particles onto plants may cause contact injury.
x Irrigate treated field after application and prior to transplant ing with minimum of 1/4 inch of water if rainfall does not
occur between application and transplanting.
TIMING TO CUCURBIT VEGETABLES
Apply LPI Flumi 51 at 4 oz. per acre as a hooded or shie lded application to row middles up to 14 days prior to transplanting
or seeding for preemergence control of the weeds listed in Table 7, Weeds Controlled by Residual Activity of LPI Flumi 51, as
well as to assist in the postemergence control of emerged weeds. A second application of LPI Flumi 51 at 4 oz. per acre may
be applied up to 21 days after transplanting or emergence if needed. DO NOT apply during or after bloom.
28
TIMING TO WEEDS
LPI Flumi 51 may be used for residual weed contro l, as well as to assist in postemergence burndown of many annual and
perennial weeds in row middles. A registered preemergence gras s herbicide may be added for control of additional grassy
weeds. For assisting in the control of emerged weeds, tank mix LPI Flumi 51 with paraquat, carfentrazone-ethyl or other
registered burndown herbicide. DO NOT tank mix with glyphosate after transplant ing. Refer to tank mix partner's label for
specified rate and application parameters.
DIRECTIONS FOR USE ON TRANSPLANTED MELON[*], PEPPER[*] AND TOMATO
BEDS[*]
For use in the states of Arizona, California and Hawaii only
[*][NOT FOR USE IN CALIFORNIA]
RESTRICTIONS
x DO NOT apply more than 4 oz. of LPI Flumi 51 (0.128 lb. a.i.) per acre during a single application.
x DO NOT apply more than 4 oz. of LPI Flumi 51 (0.128 lb. a.i.) per acre per year.
x DO NOT make more than 1 application per year.
Many weather related factors, including high wind or heavy rains or cool conditions at or near crop transplanting, may result
in crop injury in fields treated with LPI Flumi 51. On occasion this has resulted in a delay in maturity.
TIMING TO CROP
LPI Flumi 51 FALLOWBED USE PRIOR TO TRANSPLANTING
LPI Flumi 51 RATES ADJUVANT GPA TRANSPLANTING INTERVAL
4 oz/A Required by burndown tank
mix partner
Ground - 20 to 40 2 Months
Application Method: Apply with a burndown herbicide labeled for the control of emerged weeds. LPI Flumi 51, when used
alone, will not provide satisfactory control of emerged weeds.
USE RESTRICTIONS FOR PREEMERGENCE FALLOWBED WEED CONTROL PRIOR TO TRANSPLANTING
x Always read and follow all label directions when using any pesticide alone or in tank mix combinations.
x The top 4 inches of the bed, from a horiz ontal and vertical perspective, where th e crop will be transplanted, must be
removed prior to transplanting.
x Use only healthy transplants. DO NOT use on direct seeded crops.
x This use pattern makes no claim for in-season weed control after the beds have been disturbed.
x DO NOT apply when weather conditions favor spray drift.
Beds are formed and LPI
Flumi 51 is applied with a
burndown herbicide.
A minimum of 2 months after
LPI Flumi 51 application, the
tops of the beds are removed
and the soil from the tops of
the beds is placed in the area
between the beds.
Crops are transplanted into
beds.
29
DIRECTIONS FOR USE IN DRY BEANS
Dried cultivars of bean (Lupinus); bean (Phaseolus) (includes field bean, kidney bean, lima bean (dry), navy bean, pinto bean,
tepary bean); bean (Vigna) (includes adzuki bean, blackeyed pea, catjang, cowpea, crowder pea, moth bean, mung bean, rice
bean, southern pea, urd bean); broad bean (dry); chickpea; guar; lablab bean and lentil
WEED SUPPRESSION
RESTRICTIONS
x In [Arizona], [California], [Colorado], [Hawaii], [Idaho], [Nebraska], [Oregon], [Washington] DO NOT apply more than 1.5
oz. of LPI Flumi 51 (0.048 lb. a.i.) per acre during a single application to dry beans however up to 2.0 oz. (0.064 lb. a.i.)
per acre may be applied to chickpea (garbanzo beans) in these states. For all other states, DO NOT apply more than 2 oz.
of LPI Flumi 51 (0.064 lb. a.i.) per acre during a single application.
x In [Arizona], [California], [Colorado], [Hawaii], [Idaho], [Nebraska], [Oregon], [Washington] DO NOT apply more than 1.5
oz. of LPI Flumi 51 (0.048 lb. a.i.) per acre per year to dry be ans however up to 2.0 oz. (0.0 64 lb. a.i.) per acre per year
may be applied to chickpea (garbanzo bean s) in these states. For all other states, DO NOT apply more than 2 oz. of LPI
Flumi 51 (0.064 lb. a.i.) per acre per year.
x DO NOT make more than 1 application per year.
Many weather-related factors, including high wind, splashing or heavy rains or cool conditions at or near crop emergence,
may result in dry bean injury in fields treated with LPI Flumi 51. On occasion this has resulted in a delay in maturity.
TIMING TO DRY BEAN
LPI Flumi 51 may be applied to dry beans within 2 days after planting for the preemergence suppression of the weeds listed
in Table 1, Broadleaf Weeds Controlled by Residual Activity of LPI Flumi 51 or Table 8, Weeds Suppressed by Residual Activity
of LPI Flumi 51. LPI Flumi 51 may be tank mixed with other labeled herbicides for broad spectrum weed control.
TIMING TO WEEDS
LPI Flumi 51 may be applied to dry beans prior to planting or preemergence (after planting). Preemergence application of LPI
Flumi 51 must be made within 2 days after planting and prio r to dry bean emergence. To avoid severe crop injury, DO NOT
apply to dry beans after beans begin to crack or have emerged.
Preplant incorporation (PPI) applications may result in reduced weed control.
ADDITIONAL RESIDUAL GRASS CONTROL
LPI Flumi 51 can be tank mixed with pendimethalin for additional grass control.
HARVEST AID[*]
[*][NOT FOR USE IN CALIFORNIA]
RESTRICTIONS
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb. a.i.) per acre during a single application.
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb. a.i.) per acre per year.
x DO NOT make more than 1 application per year.
x DO NOT harvest within 5 days of application.
Desiccation from LPI Flumi 51 requires the addition of an agronomically appr oved adjuvant to the spray mixture. Use a
methylated seed oil which contains at least 15% emulsifiers an d 80% oil at 2% v/v. A spray grade nitrogen source (either
ammonium sulfate at 2 to 2.5 lbs/A or a 28 to 32% nitrogen solution at 1 to 2 qts/A) may be added to the spray mixture along
with either a crop oil concentrate or methylated seed oil to enhance desiccation. The addition of a nitrogen source does not
replace the need for a crop oil concentrate or a methylated seed oil. Tank mixing LPI Flumi 51 with glyphosate or paraquat
will increase control or emerged weeds and aid in harvest. Add a burndown tank mix partner for the control of emerged
weeds labeled for dry bean in accordance with the most restrictive labeled limitations and precautions.
30
TIMING TO DRY BEANS
Apply when crop is mature and at least 80% of the pods are yel lowing and mostly ripe with no more than 40% (bush type
beans) or 30% (vine type beans) of the leaves still green in color. Dry beans can be harveste d 5 days after application. To
ensure thorough coverage use 15 to 30 gallons spray solution per acre. Nozzle selection must meet manufacturer's gallonage
and pressure specifications for postemergence application.
DIRECTIONS FOR USE IN FIELD CORN
For Use in the States of Arizona, California and Hawaii Only
RESTRICTIONS
x Use only on no-till or minimum tillage fields where last years crop residue has not been incorporated into the soil.
x Corn must be planted between 14 and 30 days after application unless the application is made as part of a Fall burndown
program.
x Corn can be planted 7 days after an app lication of 2 oz./A if a minimum of 25% of the soil surface is covered with the
residue of the preceding crop and a minimum of 1/4 inch of rainfall has occurred between application and planting.
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb. a.i.) per acre per single application.
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb. a.i.) per acre per year.
x DO NOT make more than 1 application per year.
x DO NOT irrigate between emergence and 2-leaf corn.
x DO NOT use on popcorn, sweet corn or corn grown for seed.
TIMING TO FIELD CORN
x Apply LPI Flumi 51, at 2 to 3 oz./A, between 7 and 30 days prior to planting field corn for the preemergence control of
the weeds listed in Table 1, Broadleaf Weeds Controlled by Residual Activity of LPI Flumi 51.
x Apply LPI Flumi 51 at 2 oz./A between 7 and 30 days prior to planting field corn if a minimum of 25% of the soil surface
is covered with the residue of the preceding crop and a minimum of 1/4 inch of rainfall has occurred between application
and planting.
x Apply LPI Flumi 51 at 3 oz./A between 14 and 30 days prior to planting field corn.
Burndown Use Directions - For Preplant Applications in Field Corn
LPI Flumi 51 , applied as part of a burndown program, may be used for residual weed control, as well as to assist in
postemergence burndown of many weeds where field corn will be planted directly into the residue of the previous year. See
Directions for Use in Fall and Spring Preplant Burndown and Fallow Seedbed Programs in Field Corn, Peanut and Soybean for
rates and timing of applications. For control of emerged weeds, LPI Flumi 51 must be applied with an appropriate burndown
tank mix partner listed in Table 6. To en sure thorough coverage, use a minimum of 15 gallons of spray solution per acre.
Refer to tank mix partner's label for directed application pressure and directed adjuvant systems.
INCREASING SPEED OF GLYPHOSATE BURNDOWN ACTIVITY
LPI Flumi 51 , at 1 oz./A, may be tank mixed with glyphosate to increase the speed of burndown activity compared to
glyphosate applied alone. Residual weed control will not be provided at rates lower than 2 oz./A; however, suppression of
the weeds in Table 2 may occur at LPI Flumi 51 rates as low as 1 oz./A. Applications of LPI Flumi 51 at 1 oz./A must be
made a minimum of 14 days prior to planting field corn.
TANK MIXES
LPI Flumi 51 may be tank mixed with the herbicides listed in Table 6 for pre-plant bur ndown applications. Refer to tank mix
partner's label for adjuvant directions. It is the pesticide user's responsibility to ensure that all products are registered for the
intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved
in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the
tank mixture.
31
Table 6. Tank Mix Partners for Burndown and/or Residual Control of Weeds in Field Corn
TANK MIX PARTNERS1
2,4-D ethylhexyl ester metribuzin
atrazine paraquat
thifensulfuron + rimsulfuron flumetsulam
dicamba rimsulfuron
tribenuron-methyl simazine
glyphosate dicamba dimethylamine salt + 2,4-D dimethylamine salt
clopyralid + flumetsulam
1 Refer to tank mix product labels for specific directions.
TANK MIX RESTRICTIONS
Tank mixes with flufenacet, metolachlor or s-metolachlor, di methenamid or dimethenamid-p, alachlor, or acetochlor may
result in injury to field corn when app lication is followed by prolonged periods of cool wet weather and must not be used
with LPI Flumi 51 Herbicide.
DIRECTIONS FOR USE IN FIELD PEAS[*]
[*][NOT FOR USE IN CALIFORNIA]
WEED CONTROL
RESTRICTIONS
x DO NOT apply more than 2 oz. of LPI Flumi 51 (0.064 lb. a.i.) per acre during a single application.
x DO NOT apply more than 2 oz. of LPI Flumi 51 (0.064 lb. a.i.) per acre per year.
x DO NOT make more than 1 application per year.
x For use in Idaho, Montana, Oregon and Washington only.
Many weather related factors, including high wind, splashing or heavy rains or cool conditions at or near crop emergence,
may result in pea injury in fields treated with LPI Flumi 51. On occasion this has resulted in a delay in maturity.
TIMING TO FIELD PEAS
LPI Flumi 51 may be applied to field peas within 2 days after plan ting for the preemergence control of the weeds listed in
Table 1, Broadleaf Weeds Controlled by Residual Activity of LPI Flumi 51 or Table 8, Weeds Suppressed by Residual Activity
of LPI Flumi 51. Tank mix LPI Flumi 51 with other labeled herbicides for broad spectrum weed control.
TIMING TO WEEDS
LPI Flumi 51 may be applied to field peas prior to planting or preemergence (after planting). Preemergence application of LPI
Flumi 51 must be made within 2 days after planting and prio r to field pea emergence. To avoid severe crop injury, DO NOT
apply to field peas after peas begin to crack or have emerged.
Preplant incorporation (PPI) applications may result in reduced weed control.
ADDITIONAL RESIDUAL GRASS CONTROL
LPI Flumi 51 Herbicide can be tank mixed with pendimethalin for additional grass control.
HARVEST AID
RESTRICTIONS
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb. a.i.) per acre during a single application.
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb. a.i.) per acre per year.
x DO NOT make more than 1 application per year.
x DO NOT harvest within 5 days of application.
32
Desiccation from LPI Flumi 51 requires the addition of an agronomically appr oved adjuvant to the spray mixture. Use a
methylated seed oil which contains at least 15% emulsifiers a nd 80% oil at 1 qt/A. A spray gr ade nitrogen source (either
ammonium sulfate at 2 to 2.5 lbs/A or a 28 to 32% nitrogen solution at 1 to 2 qts/A) may be added to the spray mixture along
with methylated seed oil to enhance desiccation. The addition of a nitrogen source does not replace the need for methylated
seed oil. Tank mixing LPI Flumi 51 with glyphosate will increase control of emerged weeds and aid in harvest.
TIMING TO FIELD PEAS
Apply LPI Flumi 51, at 1.5 to 2 oz./A, when crop is physiologically mature and a minimum of 80% of the pods are yellow to
tan in color and 20% are yellow in color. If field peas are treated too early, a reduction in seed quality may occur. DO NOT
spray LPI Flumi 51 on any area of the field with a significant amount of plants with green color. Peas can be harvested 5 days
after application.
To ensure thorough coverage, use 15 to 30 gallons of spray solution per acre and select nozzle type using manufacturer's
gallonage and pressure specifications for postemergence application.
DIRECTIONS FOR USE IN FLAX[*]
[*][NOT FOR USE IN CALIFORNIA]
HARVEST AID
RESTRICTIONS
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb. a.i.) per acre during a single application.
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb. a.i.) per acre per year.
x DO NOT make more than 1 application per year.
x DO NOT harvest within 5 days of application.
Desiccation from LPI Flumi 51 requires the addition of an agronomically appr oved adjuvant to the spray mixture. Use a
methylated seed oil which contains at least 15% emulsifiers an d 80% oil at 1 qt./A. A spray gr ade nitrogen source (either
ammonium sulfate at 2 to 2.5 lbs./A or a 28 to 32% nitrogen solution at 1 to 2 qts./A) may be added to the spray mixture
along with methylated seed oil to enhance desiccation. The ad dition of a nitrogen source does not replace the need for
methylated seed oil.
TIMING TO FLAX
Apply LPI Flumi 51, at 1.5 to 2 oz./A, when crop is physiologically mature and at least 75% of the bolls are brown in color. Flax
can be harvested 5 days after application.
To ensure thorough coverage, use 15 to 30 gallons of spray solution per acre and select nozzle type using manufacturer's
gallonage and pressure specifications for postemergence application.
DIRECTIONS FOR USE IN FRUITING VEGETABLES[*]
[*][NOT FOR USE IN CALIFORNIA]
Includes: African eggplant; Bush Tomato; Bell Pepper; Cocona; Currant Tomato; Eggplant, Garden; Huckleberry; Goji Berry;
Groundcherry, Martynia; Naranilla; Okra, Pea Eggplant; Pe pino; Nonbell Pepper; Roselle; Scarlet Eggplant; Sunberry;
Tomatillo; Tomato; Tree Tomato; cultivars, varieties and/or hybrids of these.
Many weather related factors, including high wind or heavy rains or cool conditions at or near crop transplanting, may result
in crop injury in fields treated with this product. On occasion this has resulting in a delay in maturity.
RESTRICTIONS
x DO NOT apply more than 4 oz. of LPI Flumi 51 (0.128 lb. a.i.) per acre during a single application.
x DO NOT apply more than 8 oz. of LPI Flumi 51 (0.255 lb. a.i.) per acre per year.
x DO NOT make more than 2 applications per year.
x Minimum Retreatment Interval: 30 days.
33
ROW MIDDLES
FOR DISTRIBUTION AND USE ONLY WHERE THIRD PARTY INDEMNIFACATION IS IN EFFECT
PRECAUTIONS
x Grow plants on raised or plastic mulched beds that are higher than the treated row middle.
x Spray must be directed to the row middle, away from the crop bed and with minimal contact with plastic, including the
sides of the bed. If top of mulch beds (where plants are to be transplanted) is contacted, severe injury can occur due to
foliage contact with treated plastic. In this scenario, a rainfall even of 1/2 inch (natural or irrigation) must occur prior to
transplanting to reduce LPI Flumi 51 residues.
x Injury can occur if soil particles treated with this product contact the crop.
x Irrigate treated fields after application and prior to transplanting with minimum of 1/4 inch of water if rainfall does not
occur between application and transplanting.
x All applications must be made with hooded or shielded equipment.
TIMING TO FRUITING VEGETABLES
Apply LPI Flumi 51 at 4 oz. per acre as a hooded or shie lded application to row middles up to 14 days prior to transplanting
or seeding for preemergence control of the weeds listed in Table 7, Weeds Controlled by Residual Activity of LPI Flumi 51, as
well as to assist in the postemergence control of emerged weeds. A second application of LPI Flumi 51 at 4 oz. per acre may
be applied up to 21 days after transplanting or emergence if needed. DO NOT apply during or after bloom.
TIMING TO WEEDS
LPI Flumi 51 may be used for residual weed contro l, as well as to assist in postemergence burndown of many annual and
perennial weeds in row middles. A registered preemergence gras s herbicide may be added for control of additional grassy
weeds. For assisting in the control of emerged weeds, tank mix LPI Flumi 51 with paraquat, carfentrazone-ethyl or other
registered burndown herbicide. DO NOT tank mix with glyphosate after transplanting or crop emergence. Refer to tank mix
partner's label for specified rate and application parameters.
DIRECTIONS FOR USE IN GARLIC
RESTRICTIONS
x DO NOT apply more than 6 oz. of LPI Flumi 51 (0.191 lb. a.i.) per acre during a single application.
x DO NOT apply more than 6 oz. of LPI Flumi 51 (0.191 lb. a.i.) per acre per year.
x DO NOT make more than 1 application per year.
TIMING TO GARLIC
LPI Flumi 51 may be applied, at 6 oz./A, to garlic prior to garlic emergence. Apply within 3 days after planting garlic.
TIMING TO WEEDS
Preemergence - Preemergence to Weeds
Apply LPI Flumi 51 to weed free garlic for preemergence control of the weeds listed in Table 10, Weeds Controlled by
Preemergence Application of LPI Flumi 51.
DIRECTIONS FOR USE IN HOPS[*]
[[*][Not for Use in] [California] [or] [New York]]
RESTRICTIONS
x DO NOT apply more than 6 oz. of LPI Flumi 51 (0.191 lb. a.i.) per acre during a single application.
x DO NOT apply more than 6 oz. of LPI Flumi 51 (0.191 lb. a.i.) per acre per year.
x DO NOT make more than 1 application per year.
x DO NOT allow spray to contact green stem (unless used for suck er control), foliage, flowers or cones or unacceptable
injury may occur.
34
x DO NOT apply within 30 days of harvest.
x DO NOT use with an adjuvant.
LPI Flumi 51 can be used in hops for preemergence weed control as well as sucker control.
TIMING TO HOPS FOR SUCKER CONTROL
Apply LPI Flumi 51 at 6 oz./A as a directed application after hops have reached a minimum of 6 feet in height for sucker
control. Direct application to the lower 2 feet of the hops.
TIMING TO HOPS FOR PREEMERGENCE WEED CONTROL
Apply LPI Flumi 51 at 6 oz./A as a 1 to 1.5 foot band to each side of the hop row, to dormant hops January thru March to
ensure time for rain incorporation and activation. If weeds are emerged at the time of application, tank mix LPI Flumi 51 with
a labeled burndown herbicide including paraquat or gl yphosate to assist with control of emerged weeds. DO NOT mow or
rake over treated areas, as dust created by mowing may drift onto sensitive crops or vegetation resulting in injury.
TIMING TO WEEDS
LPI Flumi 51 applications must be made prior to weed emergence for control of weeds listed in Table 10, Weeds Controlled
by Preemergence Application of LPI Flumi 51.
It is the pesticide user's responsibility to ensure that all products are registered for the intended use. Read and follow the
applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must
follow the most restrictive directions for use and precautionary statements of each product in the tank mixture. LPI Flumi
51, when applied according to label use directions, will control the weeds listed in Table 10, Weeds Controlled by
Preemergence Application of LPI Flumi 51. This label makes no claims concerning control of other weed species.
DIRECTIONS FOR USE IN LENTILS[*]
[*][NOT FOR USE IN CALIFORNIA]
HARVEST AID
RESTRICTIONS
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb. a.i.) per acre during a single application.
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb. a.i.) per acre per year.
x DO NOT apply more than 1 application per year.
x DO NOT harvest within 5 days of application.
Desiccation from LPI Flumi 51 requires the addition of an agronomically appr oved adjuvant to the spray mixture. Use a
methylated seed oil which contains at least 15% emulsifiers an d 80% oil at 1 qt./A. A spray gr ade nitrogen source (either
ammonium sulfate at 2 to 2.5 lbs./A or a 28 to 32% nitrogen solution at 1 to 2 qts./A) may be added to the spray mixture
along with methylated seed oil to enhance desiccation. The ad dition of a nitrogen source does not replace the need for
methylated seed oil. Tank mixing LPI Flumi 51 with glyphosate or paraquat will increase control of emerged weeds and aid in
harvest.
TIMING TO LENTILS
Apply LPI Flumi 51, at 1.5 to 2 oz./A, when crop is physiologically mature and a minimum of 80% of the pods are yellow to
tan in color and 20% are yellow in color. If lentils are treated too early, a reduction in seed quality may occur. DO NOT spray
LPI Flumi 51 on any area of the field with a significant amount of plants with green color. Lentils can be harvested 5 days after
application.
To ensure thorough coverage, use 15 to 30 gallons of spray solution per acre and select nozzle type using manufacturer's
gallonage and pressure specifications for postemergence application.
35
DIRECTIONS FOR USE IN MINT
(Peppermint and Spearmint)
RESTRICTIONS
x DO NOT apply more than 4 oz. of LPI Flumi 51 (0.128 lb. a.i.) per acre during a single application.
x DO NOT apply more than 8 oz. of LPI Flumi 51 (0.255 lb. a.i.) per acre per year.
x DO NOT apply more than 2 applications per year.
x DO NOT make a sequential LPI Flumi 51 application within 60 days of the first LPI Flumi 51 application.
x Apply only to dormant mint. Application to non-dormant mint may result in unacceptable crop injury.
x DO NOT apply within 80 days of harvest.
To avoid crop injury:
x DO NOT apply to stands established longer than 3 years.
x DO NOT apply [a Fall application] if roots and rhizomes are weak, thin or damaged.
x DO NOT apply LPI Flumi 51 on mint in Southern Union County (south Ladd Canyon) or Baker County in Oregon.
x DO NOT apply to row or baby mint, use only on established meadow mint.
x DO NOT apply to mint that has been weakened by diseases, insects (example mint root borer), nematodes, drought, soil
salts, high soil pH, previous pesticides, winter injury or double cutting, as severe injury may occur. Apply only to healthy
vigorous mint with undamaged rhizomes.
x DO NOT apply before November 25 or after March 1.
Many weather related factors, including high wind, splashing or heavy rains or cool conditions at or near mint emergence,
may result in mint injury in fields treated with LPI Flumi 51.
Tank mixes with labeled rates of paraquat are advised to control emerged weeds and increase crop safety.
TIMING TO MINT
As a spray, LPI Flumi 51 may be applied only to established, dormant mint for preemergence control of the weeds listed in
Table 7 as well as to assist in the postemergence control of emerged weeds. Application to non-dormant mint or to baby
(row) mint (time from planting of mint roots through the first cutting), may result in unacceptable crop injury. As a bulk
fertilizer application, LPI Flumi 51 may be applied at least 80 days prior to ha rvest. Leaves must be dry at the time of
applications or severe injury may occur.
TIMING TO WEEDS
Burndown - Dormant Mint, Postemergence To Weeds
LPI Flumi 51 may be used for residual weed contro l, as well as to assist in postemergence burndown of many annual and
perennial weeds where established mint is dor mant. For control of emerged weeds, tank mix LPI Flumi 51 with paraquat.
Refer to paraquat label for specified rate and application pa rameters. To ensure thorough coverage, use a minimum of 15
gals. of spray solution per acre. LPI Flumi 51 tank mixes applied to assist in the co ntrol of emerged weeds must be applied
with a non-ionic surfactant at 0.25% v/v. A spray grade nitrogen source (either ammonium sulfate at 2 to 2.5 lbs./A or 28 to
32% nitrogen solution at 1 to 2 qts./A) may be added to increase herbicidal activity.
Preemergence - Dormant Mint, Preemergence To Weeds
Apply LPI Flumi 51 to dormant mint for the preemergence control of weeds listed in Table 7. Fall application of LPI Flumi 51,
followed by a sequential application in the Spring, have resulted in better Summer annual weed control than a single Fall or
single Spring application.
Fall application is most effective for Fa ll germinating weeds, for example grounds el. Fields plowed or harrowed after a LPI
Flumi 51 application will result in less effective preemergence activity. In furrow irrigated fields, corrugating that is done after
a LPI Flumi 51 application will expose untreated soil and break the herbicide barrier resulting in poor weed control.
36
Table 7. Weeds Controlled by Residual Activity of LPI Flumi 51
BROADLEAF WEED SPECIES
COMMON NAME SCIENTIFIC NAME
ORGANIC
MATTER SOIL TYPE LPI Flumi 51
RATE
Bristly Starbur Acanthospermum hispidum Up to 5%
All Soil Types
4 oz./A
Carpetweed Mollugo verticillata
Chickweeds
Common Stellaria media
Mouseear Cerastium vulgatum
Coffee Senna Cassia occidentalis
Copperleaf, Hophornbeam Acalypha ostryifolia
Dandelion Taraxacum officinale
Dodder (suppression only)1[2] Cuscuta spp.
Eclipta Eclipta prostrate
Eveningprimrose, Cutleaf Oenothera laciniata
False Chamomile[2] Tripleurospermum maritima
Fiddleneck, Coast[2] Amsinckia menziesii
Field Pennycress[2] Thlaspi arvense
Fleabane, Hairy[2] Conyza bonariensis
Flixweed[2] Descurainia spophia
Florida Beggarweed Desmodium tortuosum
Florida Pusley Richardia scabra
Golden Crownbeard Verbesina encelioides
Groundsel, Common Senecio vulgaris
Hairy Indigo Indigofera hirsuta
Hemp Sesbania Sesbania exaltata
Henbit Lamium amplexicaule
Jimsonweed Datura stramonium
Kochia Kochia scoparia
Lambsquarters, Common Chenopodium album
Little Mallow Malva parviflora
London Rocket[2] Sisymbrium irio
Marestail/Horseweed Conyza Canadensis
Mayweed/False Chamomile[2] Matricaria maritima
Morningglories
Entireleaf Ipomoea hederacea var. integriuscula
Ivyleaf Ipomoea hederacea
Red/Scarlet Ipomoea coccinea
Smallflower Jacquemontia tamnifolia
Tall Ipomoea purpurea
Mustard
Tansy[2] Descurainia pinnata
Tumble[2] Sisymbrium altissimum
Wild Brassica kaber
Nettle, Burning[2] Urtica urens
Nightshades
Black Solanum nigrum
Eastern Black Solanum ptycanthum
Hairy Solanum sarrachoides
37
BROADLEAF WEED SPECIES
COMMON NAME SCIENTIFIC NAME
ORGANIC
MATTER SOIL TYPE LPI Flumi 51
RATE
Pigweeds
Palmer Amaranth Amaranthus palmeri
Redroot Amaranthus retroflexus
Smooth Amaranthus hybridus
Spiny Amaranth Amaranthus spinosus
Tumble Amaranthus albus
Prickly Lettuce (China Lettuce) Lactuca serriola
Prickly Sida (Teaweed) Sida spinosa
Sowthistle, Prickly[2] Sonchus asper
Puncturevine Tribulus terrestris
Purslane
Common Portulaca oleracea
Horse[2] Trianthema portulacastrum
Radish, Wild Raphanus raphanistrum
Ragweed, Common Ambrosia artemisiifolia
Redmaids Calandrinia ciliata var. menziesii
Russian Thistle Salsola iberica
Shepherd's-purse Capsella bursa-pastoris
Smartweeds
Ladysthumb Polygonum persicaria
Pennsylvania Polygonum pensylvanicum
Smellmelon[2] Cucumis melo
Spotted Spurge Euphorbia maculata
Spurred Anoda Anoda cristata
Tropic Croton Croton glandulosus
Velvetleaf Abutilon theophrasti
Venice Mallow Hibiscus trionum
Waterhemps
Common Amaranthus rudis
Tall Amaranthus tuberculatus
White Cockle[2] Silene latifolia
Wild Poinsettia Euphorbia heterophylla
Wormwood, Biennial Artemisia biennis
Yellow Rocket[2] Barbarea vulgaris
GRASS WEED SPECIES
Barnyardgrass Echinochloa crus-galli
Bluegrass, Annual Poa annua
Crabgrass, Large Digitaria sanguinalis
Foxtail, Giant Setaria faberi
Goosegrass Eleusine indica
Lovegrass, California Eragrostis diffusa
Panicums
Fall Panicum dichotomiflorum
Texas Panicum texanum
Ryegrass, Italian[2] Lolium multiflorum
Signalgrass, Broadleaf Brachiaria platyphylla
38
1 LPI Flumi 51 at 4 oz./A will provide postemergence dodder suppression when applied in combination with imazethapyr,
ammonium salt or imazamox at labeled rates. The use of imazethapyr, ammonium salt and imazamox require the use of
a NIS, which will result in burn and stunting of alfalfa. Growers must expect and accept this prior to using this tank mix.
[2] [Except CA.]
DIRECTIONS FOR USE IN ONION (DRY BULB)
For Use in the States of Michigan, New York, North Dakota and Wisconsin Only
RESTRICTIONS
x DO NOT apply more than 2 oz. of LPI Flumi 51 (0.064 lb. a.i.) per acre during a single application.
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb. a.i.) per acre per year.
x DO NOT make more than 6 applications per year at the 0.5 oz rate.
x DO NOT make sequential application within 14 days of the first application.
x DO NOT apply within 45 days of harvest.
x DO NOT apply more than 1 oz. of LPI Flumi 51 (0.032 lb. a.i.) per year on soils that contain greater than 90% sand plus
gravel.
x DO NOT apply as part of a tank mix, other than with pendimethalin, or unacceptable injury may result. Other formulations
of pendimethalin must not be tank mixed with LPI Flumi 51 for use in onions.
x DO NOT apply with any type of adjuvant.
Use of LPI Flumi 51 may result in necrotic spotting of onion leaves that come in contact with the spray.
[Microrate Application]
[Sequential applications of LPI Flumi 51 may be applied to onions (dry bulb), between the 2-leaf and 6-leaf stage, at rates of
0.5 to 1 oz./A, on a 7 day interval.]
TIMING TO ONIONS (dry bulb)
Apply LPI Flumi 51 to transplanted onions (dry bulb) between the 2-leaf and 6-leaf stage and on direct seed onions (dry bulb)
between the 3-leaf and 6-leaf stage.
TIMING TO WEEDS
Preemergence - Emerged Onions (dry bulb), Preemergence To Weeds
Apply LPI Flumi 51 to weed free onions (dry bulb) for preemergence control of the weeds listed in Table 1, Section A.
It is the pesticide user's responsibility to ensure that all products are registered for the intended use. Read and follow the
applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must
follow the most restrictive directions for use and precautionary statements of each product in the tank mixture. LPI Flumi
51, when applied according to label use directions, will control the weeds listed in Table below.
CHEMIGATION
LPI Flumi 51 may be applied through spri nkler irrigation systems in onions (dry bu lb). Follow all label directions for these
crops regarding rates, timing of application, special instructions and precautions.
Apply this product only through center pivot systems. End guns must be turned off due to uneven application. DO NOT apply
this product through any other type of irrigation system.
Crop injury, lack of efficacy or illegal pesticide residues in the crop can result from non-uniform distribution of treated water.
The system must be properly calibrated (with water only) to ensure that the amount of LPI Flumi 51 applied corresponds to
the specified rate.
Apply LPI Flumi 51 in ½ to ¾ inches of water during the first sprinkler set. Allow time for all lines to flush the herbicide through
all nozzles before turning off irrigation water. To ensure the lines are flushed and free of remaining herbicide, a dye indicator
may be injected into the lines to mark the end of the ap plication period. Once chemigation has begun, the run must be
completed to ensure no product is left in the system.
39
If you have any questions about calibrati on, contact your State Extension Service Specialist, equipment manufacturers or
other experts.
Chemigation Restrictions
1. DO NOT connect an irrigation system (including greenhouse systems) used for pesticide application to a public water
system unless the pesticide label-prescribed safety devices for public water systems are in place.
2. A person knowledgeable of the chemigation system and respons ible for its operation or under the supervision of the
responsible person, shall shut the system down and make necessary adjustments if the need arise.
3. The system must be free of leaks and clogged nozzles.
4. The pesticide must be supplied continuously for the dura tion of the aqueous application. An uneven application may
cause injury to the crop or poor weed control.
5. Agitation must be maintained in the nurse tank.
6. The sprinkler chemigation system must contain a functional check valve, vacuum relief valve and low pressure drain
appropriately located on the irrigation pipeline to prevent water source contamination from backflow.
7. The pesticide injection pipeline must contain a functional, au tomatic, quick closing check valve to prevent the flow of
fluid back toward the injection pump.
8. The pesticide injection pipeline must contain a functional, normally closed, solenoid operated valve located on the intake
side of the injection pump and connected to the system interlock to prevent fluid from being withdrawn from the supply
tank when the irrigation system is either automatically or manually shut down.
9. The system must contain functional interlocking controls to automatically shut off the pesticide injection pump when the
water pump motor stops, or in the case where there is no water pump, when the water pressure decreases to the point
where pesticide distribution is adversely affected.
10. The irrigation line or water pump must include a functional pressure switch which will stop the water pump motor when
the water pressure decreases to the point where pesticide distribution is adversely affected.
11. Systems must use a metering pump, for example a positive displacement injection pump (e.g., diaphragm pump),
effectively designed and constructed of materials that are compatible with the pesticides and capable of being fitted
with a system interlock.
12. DO NOT apply when wind speed favors drift beyond the area intended for treatment.
Chemigation Systems Connected to Public Water Systems
1. Public water system means a system for the provision to th e public of piped water for human consumption, if such a
system has at least 15 service connections or regularly serves an average of at least 25 individuals daily at least 60 days
out of the year.
2. Chemigation systems connected to the public water system must contain a functional, reduced pressure zone, backflow
preventer (RPZ) or the functional equivalent in the water supply line upstream from the point of pesticide introduction.
As an option to the RPZ, discharge the water from the pu blic water system into a reservoir tank prior to pesticide
introduction. There shall be a complete physical break (air ga p) between the outlet end of the fill pipe and the top
overflow rim of the reservoir tank of at least twice the inside diameter of the fill pipe.
3. All chemigation systems connected to the public water system must also follow restrictions listed in the preceding section
titled "Special Precautions for Chemigation".
DIRECTIONS FOR USE IN PEANUT[*]
[*][NOT FOR USE IN CALIFORNIA]
RESTRICTIONS
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb. a.i.) per single application.
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb. a.i.) per single acre per year.
x DO NOT make more than 1 application per year.
x DO NOT irrigate when peanuts are cracking.
x DO NOT graze treated fields or feed treated hay to livestock.
x [In California, refer to the section "DIRECTIONS FOR USE IN FALL AND SPRING PREPLANT BURNDOWN AND FALLOW
SEEDBED PROGRAMS IN FIELD CORN, PEANUT AND SOYBEAN" on this label.]
40
x [DO NOT apply more than 2 oz./A (0.064 lb. a.i.) in the states of North Carolina, Oklahoma or Virginia where climatic
conditions may result in unacceptable injury to peanuts except as described in the NORTH CAROLINA, OKLAHOMA AND
VIRGINIA ONLY - PREEMERGENCE APPLICATION IN PEANUT section below.]
PRECAUTIONS
Many weather related factors, including high wind, splashing or heavy rains or cool conditions at or near peanut
emergence, may result in peanut injury in fields treated wi th LPI Flumi 51. On occasion this has resulted in a delay in
maturity or even a slight decrease in yield.
WIND MANAGEMENT
In areas where shallow cultivation is used between rows to reduce wind-borne sand damage to peanuts, weed control from
LPI Flumi 51 may be reduced.
TIMING TO PEANUTS
LPI Flumi 51 may be applied to peanuts prior to planting or preemergence (after planting). Preemergence applications of LPI
Flumi 51 must be made within 2 days after planting and prior to peanut emergence. Application after the peanuts have begun
to crack, or are emerged, will result in severe crop injury. Application must not be made when peanuts have begun to crack.
Select LPI Flumi 51 rate from Table 1 according to anticipated weed spectrum.
TIMING TO WEEDS
Burndown - Preemergence to Peanuts, Postemergence to Weeds
LPI Flumi 51 , applied as part of a burndown program, may be used for residual weed control, as well as to assist in
postemergence burndown of many annual and perennial weeds where peanuts will be planted directly into a stale seedbed,
cover crop or in previous crop residues. Apply LPI Flumi 51 before planting, during planting or after planting, but before the
crop emerges. For control of emerged weeds, tank mix LPI Flumi 51 with glyphosate. Refer to glyphosate label for specified
rate and application pressure. To ensure thorough coverage, use a minimum of 15 gals. of spray solution per acre. LPI Flumi
51 tank mixes applied to assist in the control of emerged we eds must be applied with an adjuvant, including a non-ionic
surfactant at 0.25% v/v or a crop oil concentrate or a methylated seed oil at 1 to 2 pt./A. A spray grade nitrogen source (either
ammonium sulfate at 2 to 2.5 lbs./A or 28 to 32% nitrogen so lution at 1 to 2 qts./A) may be added to increase herbicidal
activity.
Preemergence (conventional tillage) application of LPI Flumi 51 must be applied prior to weed emergence.
ADDITIONAL RESIDUAL GRASS CONTROL: SEQUENTIAL
LPI Flumi 51 may be applied sequentially following a preplant incorporated application of trifluralin (states of New Mexico,
Oklahoma and Texas only), ethalfluralin, metolachlor, pendimethalin or dimethenamid.
ADDITIONAL RESIDUAL GRASS CONTROL: TANK MIXED
LPI Flumi 51 can be tank mixed with alachlor, metolachlor or dimethanamid for additional grass and broadleaf weed control.
LPI Flumi 51 can also be tank mixed with pendimethalin or ethalfluralin in states where they are labeled, provided overhead
irrigation guidelines on the pendimethalin and/or ethalfluralin labels are followed.
NORTH CAROLINA, OKLAHOMA AND VIRGINIA ONLY - PREEMERGENCE APPLICATION IN PEANUT
DO NOT apply more than 2 oz./A in these states where climactic co nditions may result in unacceptable injury to peanuts,
except as described below.
LPI Flumi 51 , at 3 oz. (0.096 lb a.i.) per acre, ca n be applied within 2 days of planti ng to control common ragweed, tropic
croton and entireleaf, ivyleaf and tall/scarlet morningglories . Cool temperatures near emergence (2 consecutive nighttime
lows in the 50's F) in combination with heavy rainfall may result in severe crop injury. Use LPI Flumi 51, at 3 oz./A, in these
states when other alternatives are not available for adequate control of the weeds listed on this label and the user
acknowledges the risks associated with this use rate under the adverse environmental conditions listed above.
41
DIRECTIONS FOR USE IN POTATO
For Use Only in Arizona, California, Colorado, Delaware, Florida, Hawaii, Idaho, Maryland, Minnesota, Montana,
Nebraska, Nevada, New Jersey, New Mexico, North Carolina, North Dakota, Oregon, South Carolina, South Dakota,
Texas, Utah, Virginia, Washington, Washington DC, and Wyoming
RESTRICTIONS
x DO NOT apply more than 1.5 oz. of LPI Flumi 51 (0.048 lb. a.i.) per acre during a single application.
x DO NOT apply more than 1.5 oz. of LPI Flumi 51 (0.048 lb. a.i.) per acre per year.
x DO NOT make more than 1 application per year.
x DO NOT apply to Rill (Furrow) irrigated potatoes.
PRECAUTION
Many weather related factors, including high wind, splashing or heavy rains or cool conditions at or near potato
emergence, may result in potato injury in fields treated with LPI Flumi 51. On occasion this has resulted in a delay in
maturity.
TIMING TO POTATOES
LPI Flumi 51 may be applied to potatoes after hilling for the preemergence supp ression of the weeds listed in Table 8. LPI
Flumi 51 may be tank mixed with other labeled herbicides for broad spectrum weed control. A minimum of 2 inches of settled
soil must cover the vegetative portion of the potato plant at the time of LPI Flumi 51 application. Application to potatoes
with less than 2 inches of soil covering the vegetative portion of the potato may result in crop injury. In areas with historically
higher amounts of rainfall during the time of preemergence herbicide applications, including the Red River Valley, Minnesota
and North Dakota, the requirement for 2 inches of settled soil is critical to avoid crop injury. Mechanical incorporation of LPI
Flumi 51 will result in decreased weed control and must be avoided. In areas with sprinkler irrigation, incorporate LPI Flumi
51 with 0.25 to 0.75 inches of irrigation, after application and before any sprouts are within 2 inches of the settled soil surface
if a rainfall event has not yet occurred.
TIMING TO WEEDS
Preemergence - Soil Covered Potatoes, Preemergence To Weeds
Apply LPI Flumi 51 to soil covered potatoes for the preemergence supp ression of the weeds listed in Table 8. Harrowing,
cultivation or corrugating after LPI Flumi 51 application will reduce weed control.
It is the pesticide user's responsibility to ensure that all products are registered for the intended use. Read and follow the
applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must
follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.
CHEMIGATION
LPI Flumi 51 may be applied through sprinkler irrigation systems in potatoes. Follow all label directions for this crop regarding
rates, timing of application, special instructions and precautions.
Apply this product only through center pivot systems. End guns must be turned off due to uneven application. DO NOT apply
this product through any other type of irrigation system.
Crop injury, lack of efficacy or illegal pesticide residues in the crop can result from non-uniform distribution of treated water.
The system must be properly calibrated (with water only) to ensure that the amount of LPI Flumi 51 applied corresponds to
the specified rate.
Apply LPI Flumi 51 in ½ to ¾ inches of water during the first sprinkler set. Allow for time for all lines to flush the herbicide
through all nozzles before turning off irrigation water. To ensure the lines are flushed and free of remaining herbicide, a dye
indicator may be injected into the lines to mark the end of the application period.
Once chemigation has begun, the run must be completed to ensure no product is left in the system.
If you have any questions about calibrati on, contact your State Extension Service Specialist, equipment manufacturers or
other experts.
42
Chemigation Restrictions
1. DO NOT connect an irrigation system (including greenhouse systems) used for pesticide application to a public water
system unless the pesticide label-prescribed safety devices for public water systems are in place.
2. A person knowledgeable of the chemigation system and respons ible for its operation or under the supervision of the
responsible person, shall shut the system down and make necessary adjustments if the need arise.
3. The system must be free of leaks and clogged nozzles.
4. The pesticide must be supplied continuously for the dura tion of the aqueous application. An uneven application may
cause injury to the crop or poor weed control.
5. Agitation must be maintained in the nurse tank.
6. The sprinkler chemigation system must contain a functional check valve, vacuum relief valve and low pressure drain
appropriately located on the irrigation pipeline to prevent water source contamination from backflow.
7. The pesticide injection pipeline must contain a functional, au tomatic, quick closing check valve to prevent the flow of
fluid back toward the injection pump.
8. The pesticide injection pipeline must contain a functional, normally closed, solenoid operated valve located on the intake
side of the injection pump and connected to the system interlock to prevent fluid from being withdrawn from the supply
tank when the irrigation system is either automatically or manually shut down.
9. The system must contain functional interlocking controls to automatically shut off the pesticide injection pump when the
water pump motor stops, or in the case where there is no water pump, when the water pressure decreases to the point
where pesticide distribution is adversely affected.
10. The irrigation line or water pump must include a functional pressure switch which will stop the water pump motor when
the water pressure decreases to the point where pesticide distribution is adversely affected.
11. Systems must use a metering pump, for example, positive displacement injection pump (e.g., diaphragm pump),
effectively designed and constructed of materials that are compatible with the pesticides and capable of being fitted
with a system interlock.
12. DO NOT apply when wind speed favors drift beyond the area intended for treatment.
Chemigation Systems Connected to Public Water Systems
1. Public water system means a system for the provision to th e public of piped water for human consumption, if such a
system has at least 15 service connections or regularly serves an average of at least 25 individuals daily at least 60 days
out of the year.
2. Chemigation systems connected to the public water system must contain a functional, reduced pressure zone, backflow
preventer (RPZ) or the functional equivalent in the water supply line upstream from the point of pesticide introduction.
As an option to the RPZ, discharge the water from the public water system d into a reservoir tank prior to pesticide
introduction. There shall be a complete physical break (air ga p) between the outlet end of the fill pipe and the top
overflow rim of the reservoir tank of at least twice the inside diameter of the fill pipe.
3. All chemigation systems connected to the public water system must also follow restrictions listed in the preceding section
titled "Special Precautions for Chemigation".
43
Table 8. Weeds Suppressed by Residual Activity of LPI Flumi 51 at 1.5 oz/A
COMMON NAME SCIENTIFIC NAME ORGANIC MATTER
LPI Flumi 51
HERBICIDE RATE
Lambsquarters, Common Chenopodium album Up to 5% 1.5 oz./A
Mustard, Wild Brassica kaber
Nightshades
Black Solanum nigrum Up to 5% 1.5 oz./A
Eastern Black Solanum ptycanthum
Hairy Solanum sarrachoides
Pigweeds
Palmer Amaranth Amaranthus palmeri
Redroot Amaranthus retroflexus
Smooth Amaranthus hybridus
Spiny Amaranth Amaranthus spinosus
Tumble Amaranthus albus
Prickly Lettuce (China Lettuce)[1] Lactuca serriola
Radish, Wild Raphanus raphanistrum
[1] [Except CA]
DIRECTIONS FOR USE IN SOYBEAN[*]
[*][NOT FOR USE IN CALIFORNIA]
RESTRICTIONS
x DO NOT apply more than 3 oz of LPI Flumi 51 (0.096 lb. a.i.) per single application.
x DO NOT apply more than 3 oz of LPI Flumi 51 (0.096 lb. a.i.) per acre per year.
x DO NOT make more than 1 application per year.
x DO NOT graze treated fields or feed treated hay to livestock for 21 days following application of this product.
x DO NOT tank mix LPI Flumi 51 with flufenacet, metolachlor or dimethenamid within 14 days of planting soybeans, unless
soybeans are planted under no-till or minimum tillage conditions on wheat stubble or no-till field corn stubble.
x DO NOT irrigate when soybeans are cracking.
[In California, refer to the section DIRECTIONS FOR USE IN FALL AND SPRING PREPLANT BURNDOWN AND FALLOW SEEDBED
PROGRAMS IN FIELD CORN, PEANUT AND SOYBEAN in this label.]
TIMING TO SOYBEANS
LPI Flumi 51 may be applied to soybeans prior to planting or preemergence (after planting). Preemergence application of LPI
Flumi 51 must be made within 3 days after planting and prior to soybean emergence. Application after the soybeans have
begun to crack, or are emerged, will result in severe crop injury. Application must not be made when soybeans have begun
to crack. Select LPI Flumi 51 rate from Table 1 according to anticipated weed spectrum.
TIMING TO WEEDS
Burndown - Preemergence to Soybeans, Postemergence to Weeds
LPI Flumi 51 , applied as part of a burndown program, may be used for residual weed control, as well as to assist in
postemergence burndown of many annual and perennial weeds where soybeans will be planted directly into a stale seedbed,
cover crop or in previous crop residues. For control of emerged weeds, choose the most appropriate tank mix partner from
Table 9. Apply LPI Flumi 51 with ground equipment before planting, during planting or within 3 days after planting, but before
the crop emerges . To ensure thorough coverage, use a minimum of 15 gals. of spray solution per acre. Refer to tank mix
partner's label for directed application pressure. All LPI Flumi 51 tank mixes applied to assist in the control of emerged weeds
must be applied with crop oil concentrate or methylated seed oil at 1 to 2 pt./A or a non-ionic surfactant at 0.25% v/v.
44
INCREASING SPEED OF GLYPHOSATE BURNDOWN ACTIVITY
LPI Flumi 51, at rates as low as 1 oz./A, may be tank mixed with glyphosate to increase the speed of burndown activity
compared to glyphosate applied alone. Residual weed control will not be provided at rates lower than 2 oz./A; however,
suppression of the weeds in Table 2, may occur at LPI Flumi 51 rates as low as 1 oz./A.
TANK MIXES
LPI Flumi 51 may be tank mixed with th e herbicides listed in Table 9 for increa sed burndown activity, additional residual
broadleaf and/or additional grass control. Refer to tank mix partner's label for adjuvant directions.
Table 9. Tank Mix Partners for Control of Emerged Weeds in Reduced Tillage Soybeans
TANK MIX PARTNER TARGET WEEDS1
2,4-D ethylhexyl ester Marestail, Giant Ragweed, Dandelion
paraquat Annual Grasses, Henbit
glyphosate General Burndown
clethodim Annual Grasses
imazaquin Cocklebur Common, Sunflower
dicamba dimethylamine salt + 2,4-D dimethylamine salt Marestail, Giant Ragweed, Dandelion
1 Refer to tank mix product labels for specific directions for control of emerged weeds present.
ADDITIONAL RESIDUAL BROADLEAF CONTROL
LPI Flumi 51 can be tank mixed with metribuzin , cloransulam-methyl, linuron, imazeth apyr, flumetsulam, or imazaquin for
additional broadleaf control.
ADDITIONAL RESIDUAL GRASS CONTROL
LPI Flumi 51 can be tank mixed with pendimetha lin or clomazone for additional grass control. In the states of Alabama,
Arkansas, Delaware, Georgia, Louisiana, Maryland, Mississippi, North Carolina, Oklahoma, South Carolina, Tennessee, Texas
and Virginia, LPI Flumi 51 can be tank mixed with micro-encapsulated acetochlor at 2 oz. per acre. Tank mixes with flufenacet,
metolachlor or dimethenamid may result in severe injury to soybeans when application is followed by prolong periods of cool
wet weather and must not be used with LPI Flumi 51.
ROUNDUP READY PROGRAM
LPI Flumi 51 may be applied as part of a burndown program or preemergence in conventional tillage programs, at 2 to 3 oz./A
to reduce early season weed competition from waterhemp, velvetleaf, nightshade and morningglories as well as other weeds
listed in Tables 2 and 3 in Roundup Ready programs. A sequential post emergence application of glyphosate will be required
to control weeds not controlled by LPI Flumi 51.
DIRECTIONS FOR USE IN STRAWBERRY
RESTRICTIONS
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb. a.i.) per acre per application.
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb. a.i.) per acre per year.
x DO NOT make more than 1 application per year.
PRECAUTIONS
x LPI Flumi 51 , at 3 oz. per acre, can be applied to the soil a mini mum of 30 days prior to transplanting strawberries
provided the strawberries will be transplanted through a plastic mulch.
x LPI Flumi 51 at 3 oz. per acre can be applied to dormant (estab lished or newly planted) strawberries for the
preemergence control of the weeds listed in Table 1, Broadleaf Weeds Controlled by Residual Activity of LPI Flumi 51.
x LPI Flumi 51 , at 3 oz. per acre, can be applied in strawberry ro w middles with a shielded or hooded sprayer for the
preemergence control of the weeds listed in Table 1, Broadleaf Weeds Controlled by Residual Activity of LPI Flumi 51.
45
Application
Method
Minimum Time
from Application
to Harvest (PHI)
Use Rate Per
Acre Per
Application (oz)
Use Rate Per Acre
Per Year (oz) Application Instructions
Pre-transplant Not applicable 3 3 Apply a minimum of 30 days prior to
transplanting and prior to plastic mulch
being laid.
Apply as part of a tank mix to control
emerged weeds.
Preemergence to
dormant
strawberries
Not applicable 3 3 Crop oil concentrate, at 1% v/v, or non-
ionic surfactant, at 0.25% v/v, may be
added to help control emerged broadleaf
weeds.
Hooded or
shielded sprayer
application to row
middles
DO NOT apply
after fruit set
3 3 Apply only to row middles - DO NOT
apply over strawberries.
Apply prior to weed emergence.
Crop spotting may occur if an adjuvant is
added.
Avoid application after fruit set as this
may result in spotting of fruit.
DO NOT allow spray drift to come in
contact with fruit or foliage.
Table 10. Weeds Controlled by Preemergence Application of LPI Flumi 51
BROADLEAF WEED SPECIES
COMMON NAME SCIENTIFIC NAME
ORGANIC
MATTER SOIL TYPE LPI Flumi 51
RATE
Bristly Starbur Acanthospermum hispidum Up to 10%1
All Soil Types2
Asparagus,
Caneberries
Garlic, Hops
6 oz./A
Sugarcane
6 to 8 oz./A
Bushberries,
Cactus, Citrus
Fruit Grapes,
Nut Trees,
Olive, Pome
Fruit,
Pomegranate,
Stone Fruit and
Non-Bearing
Fruit Trees
6 to 12 oz./A2
To Maintain
Bare Ground on
Non-Crop Areas
of Farms,
Orchards &
Vineyards
6 to 12 oz./A
Carpetweed Mollugo verticillata
Chickweeds
Common Stellaria media
Mouseear Cerastium vulgatum
Coffee Senna Cassia occidentalis
Dandelion Taraxacum officinale
Eclipta Eclipta prostrata
Evening primrose, Cutleaf Oenothera laciniata
False Chamomile[3] Tripleurospermum maritima
Filaree
Redstem Erodium cicutarium
Whitestem Erodium moschatum
Fiddleneck, Coast[3] Amsinckia menziesii
Fleabane, Hairy Conyza bonariensis
Field Pennycress[3] Thlaspi arvense
Florida Beggarweed Desmodium tortuosum
Florida Pusley Richardia scabra
Golden Crownbeard Verbesina encelioides
Groundsel, Common Senecio vulgaris
Hairy Indigo Indigofera hirsuta
Hemp Sesbania Sesbania exaltata
Henbit Lamium amplexicaule
Jimsonweed Datura stramonium
Kochia Kochia scoparia
Lambsquarters, Common Chenopodium album
46
BROADLEAF WEED SPECIES
COMMON NAME SCIENTIFIC NAME
ORGANIC
MATTER SOIL TYPE LPI Flumi 51
RATE
Mallow
Common (Cheeseweed) Malva neglecta
Little
Horseweed/Marestail Conyza canadensis
Mayweed/False Chamomile[3] Matricaria maritima
Morningglories
Entireleaf Ipomoea hederacea var. integriuscula
Ivyleaf Ipomoea hederacea
Red/Scarlet Ipomoea coccinea
Smallflower Jacquemontia tamnifolia
Tall Ipomoea purpurea
Mustards
London Rocket[3] Sisymbrium irio
Tansey[3] Desurainia pinnata
Tumble Sisymbrium altissimum
Wild Brassica kaber
Nettle, Burning[3] Urtica urens
Nightshades
Black Solanum nigrum
Eastern Black Solanum ptycanthum
Hairy Solanum sarrachoides
Pigweeds
Palmer Amaranth Amaranthus palmeri
Redroot Amaranthus retroflexus
Smooth Amaranthus hybridus
Spiny Amaranth Amaranthus spinosus
Tumble Amaranthus albus
Prickly Lettuce (China Lettuce) Lactuca serriola
Prickly Sida (Teaweed) Sida spinosa
Puncturevine Tribulus terrestris
Purslane
Common Portulaca oleracea
Horse[3] Trianthema portulacastrum
Radish, Wild Raphanus raphanistrum
Ragweed, Common Ambrosia artemisiifolia
Redmaids Calandrinia ciliata var menziessii
Redweed Melochia corchorifolia
Shepherd’s-purse Capsella bursa-pastoris
Smellmelon[3] Cucumis melo
Sowthistile, Annual[3] Sonchus oleraceus
Spotted Spurge Euphorbia maculata
Spurred Anoda Anoda cristata
Thistle, Russian Salsola iberica
Tropic Croton Croton glandulosus
Venice Mallow Hibiscus trionum
47
BROADLEAF WEED SPECIES
COMMON NAME SCIENTIFIC NAME
ORGANIC
MATTER SOIL TYPE LPI Flumi 51
RATE
Waterhemps
Common Amaranthus rudis
Tall Amaranthus tuberculatus
Wild Poinsettia Euphorbia heterophylla
White Cockle[3] Silene latifolia
Wormwood, Biennial Artemisia beinnis
Yellow Rocket[3] Barbarea vulgaris
GRASS WEED SPECIES Up to 10%1 All Soil Types2 Asparagus,
Caneberries
Garlic, Hops
6 oz./A
Sugarcane
6 to 8 oz./A
Bushberries,
Cactus, Citrus
Fruit Grapes, Nut
Trees, Olive,
Pome Fruit,
Pomegranate,
Stone Fruit and
Non-Bearing Fruit
Trees
6 to 12 oz./A2
To Maintain Bare
Ground on Non-
Crop Areas of
Farms, Orchards
& Vineyards
6 to 12 oz./A
Barnyardgrass Echinochloa crus-galli
Bluegrass, Annual Poa annua
Crabgrass
Large Digitaria sanquinalis
Smooth Digitaria ischaemum
Foxtails
Bristly Setaria verticillata
Giant Setaria faberi
Green Setaria viridis
Yellow Setaria glauca
Goosegrass Eleusine indica
Guineagrass Panicum maximum
Johnsongrass, Seedling Sorghum halepense
Lovegrass, California Eragrostis diffusa
Panicum
Fall Panicum dichotomiflorum
Texas Panicum texaum
Ryegrass, Italian[3] Lolium multiflorum
Signalgrass, Broadleaf Brachiaria platyphylla
1 LPI Flumi 51 can be used on soils with greater than 10% organi c matter; however, length of residual control may be
shorter than on soils with lower organic matter content.
2 Use a maximum LPI Flumi 51 rate of 6 oz./A per application on any soil th at has a sand plus gravel content over 80% if
bushes, trees or vines are under 3 years of age.
[3] [Except CA]
DIRECTIONS FOR USE IN SUGARCANE[*]
[*][NOT FOR USE IN CALIFORNIA]
RESTRICTIONS
x DO NOT apply more than 8 oz. of LPI Flumi 51 (0.255 lb. a.i.) per acre per application.
x DO NOT make a sequential application within 14 days of the first application.
x DO NOT apply more than 12 oz. of LPI Flumi 51 (0.383 lb. a.i.) per acre per year.
x DO NOT make more than 4 applications per year at the 3 oz rate.
x DO NOT apply within 90 days of harvest.
x Minimum Retreatment Interval: 14 days.
TIMING TO SUGARCANE
LPI Flumi 51 may be applied from 2 weeks prior to planting to before the sugarcane emerges, post directed or at layby. Select
the proper LPI Flumi 51 rate from Table 10 according to anticipated w eed spectrum and soil organic matter content for
48
preemergence applications. Select LPI Flumi 51 rate from Table 11 according to emerged weed spectrum and weed heights
for post-directed and layby applications.
TIMING TO WEEDS
Burndown - Preemergence to Sugarcane, Postemergence to Weeds
LPI Flumi 51 may be used for preemergence control, and to assist in postemergence burndown, of many annual broadleaf
weeds in sugarcane. For control of emerged weeds, choose the most appropriate tank mix partner from Table 12. Apply LPI
Flumi 51 before the crop emerges. To ensure thorough coverage, use a minimum of 15 gals. of spray solution per acre. All
LPI Flumi 51 tank mixes applied to assist in the control of emerg ed weeds must be applied with crop oil concentrate or
methylated seed oil at 1 qt./A or a non-ionic surfactant at 0.25% v/v. Some tank mix products, for example, glyphosate, may
be formulated with a suitable adjuvant and DO NOT require additional adjuvant.
Preemergence - Preemergence to Sugarcane, Preemergence to Weeds
LPI Flumi 51 may be used for preemergence control of many annual br oadleaf and grassy weeds in sugarcane. Select rate
based on anticipated weed spectrum and soil organic matter content from Table 10. Apply LPI Flumi 51 before the crop
emerges.
Post-Directed - Postemergence to Sugarcane, Postemergence to Weeds
Make post-directed applications to upright sugarcane varieties after the sugarcane has exceeded 24 inches in height and has
begun to joint. Post-directed applications must not be made to "PINEAPPLE" varieties. Post-directed applications to
"PINEAPPLE" varieties or to upright varieties that have not exce eded 24 inches in height and have not begun to joint, may
result in unacceptable crop injury. To ensure thorough coverage, use a minimum of 15 gals. of spray solution per acre. Post-
directed applications of LPI Flumi 51 must include a crop oil concentrate or me thylated seed oil at 1 qt./A or a non-ionic
surfactant at 0.25% v/v. Select the proper LPI Flumi 51 rate based on weed spectrum and weed height from Table 11.
Layby - Postemergence to Sugarcane, Postemergence to Weeds
Layby applications can be made to upright and "PINEAPPLE" vari eties after the sugarcane has exceeded 30 inches in height
and the spray solution will not contact foliage above 6 inches from the base of the sugarcane. To ensure thorough coverage,
use a minimum of 15 gals. of spray solution per acre. Layby applications of LPI Flumi 51 must be applied with crop oil
concentrate or methylated seed oil at 1 qt./A or a non-ionic surfactant at 0.25% v/v. Select the proper LPI Flumi 51 rate based
on weed spectrum and weed height from Table 11.
Table 11. Broadleaf Weeds Controlled by Post-Directed or Layby Application of LPI Flumi 51 in
Sugarcane
BROADLEAF WEED SPECIES WEED HEIGHT (Inches)
COMMON NAME SCIENTIFIC NAME 3 oz./A 4 oz./A
Bindweed, Field1 Convolvulus arvensis 4 8
Carpetweed Mollugo verticillata 4 4
Cocklebur, Common Xanthium strumarium 4 4
Florida Beggarweed Desmodium tortuosum 2 2
Hemp Sesbania Sesbania exaltata 6 8
Jimsonweed Datura stramonium 4 4
Lambsquarters, Common Chenopodium album 4 4
Morningglories
Entireleaf Ipomoea hederacea var. integriuscula - 4
Ivyleaf Ipomoea hederacea 4 4
Pitted Ipomoea lacunosa 4 6
Red Ipomoea coccinea - 4
Tall Ipomoea purpurea 2 4
Mustard, Wild Brassica kaber 6 6
49
BROADLEAF WEED SPECIES WEED HEIGHT (Inches)
COMMON NAME SCIENTIFIC NAME 3 oz./A 4 oz./A
Pigweeds
Palmer Amaranth Amaranthus palmeri 4 6
Redroot Amaranthus retroflexus 4 6
Smooth Amaranthus hybridus 4 6
Plaintain, Broadleaf Plantago major 6 6
Prickly Sida Sida spinosa 4 6
Purslanes
Common Portulaca oleracea 2 4
Rock Calandrinia spp. - 2
Ragweeds
Common Ambrosia artemisiifolia 2 2
Giant Ambrosia trifida 4 4
Rice Flatsedge Cyperus iria 2 4
Sicklepod Senna obtusifolia 4 4
Smartweeds
Ladysthumb Polygonum persicaria 4 4
Pale Polygonum lapathifolium 4 4
Pennsylvania Polygonum pensylvanicum 4 4
Spotted Spurge Euphorbia maculata 4 4
Velvetleaf Abutilon theophrasti 4 6
Venice Mallow Hibiscus trionum 2 2
Waterhemps
Common Amaranthus rudis 2 2
Tall Amaranthus tuberculatus 2 2
1 LPI Flumi 51 tank mixes will only control the above ground porti on of field bindweed. Repeated applications will be
needed to control regrowth.
TANK MIXES
LPI Flumi 51 may be tank mixed with the herbicides listed in Table 12 for additional weed control in burndown, preemergence,
post-directed and layby applications. Refer to tank mix partner's label for adjuvant directions.
Tank Mixing Instructions:
It is the pesticide user's responsibility to ensure that all products are registered for the intended use. Read and follow the
applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow
the most restrictive directions for use and precautionary statements of each product in the tank mixture.
Table 12. Tank Mixes with LPI Flumi 51 for Post-Directed or Layby Use in Sugarcane
TANK MIX PARTNER1 TARGET WEEDS BURNDOWN POST-DIRECTED2 LAYBY
2,4-D amine Annual and Perennial Broadleaf Weeds X
atrazine Pigweeds, Cocklebur X X X
asulam, sodium salt3 Annual Grasses X X
ametryn4 Annual Grasses X X
glyphosate5 Annual and Perennial Weeds X X
metribuzin6 Broadleaf Panicum, Goosegrass X X
halosulfuron-methyl Purple Nutsedge, Yellow Nutsedge X X X
2,4-D amine + dicamba
dimethylamine salt
Annual and Perennial Broadleaf Weeds X
1 Refer to tank mix product labels for specific directions for control of emerged weeds present not listed in Table 11.
50
2 Post-directed applications must only be made to upright sugarcane varieties after the sugarcane has exceeded 24 inches
in height. Post-directed applications must not be made to "PINEAPPLE" varieties. Post-directed applications to
"PINEAPPLE" varieties or to upright varieties that have not exceeded 24 inches in height may result in unacceptable crop
injury.
3 Apply to sugarcane at least 24 inches tall.
4 Apply before weeds are greater than 6 inches tall.
5 Glyphosate applications must be made with a hooded sprayer. Sugarcane must be a least 3 ft. tall. Contact with the
sugarcane foliage by either the spray mixture or the treated weed foliage will result in sugarcane injury.
6 Refer to metribuzin label for restrictions based on soil type.
ADDITIONAL PREEMERGENCE BROADLEAF CONTROL
LPI Flumi 51 can be tank mixed with atrazine or diuron for additional preemergence broadleaf control.
ADDITIONAL PREEMERGENCE GRASS CONTROL
LPI Flumi 51 can be tank mixed with Prowl (o r other pendimethalin products) for ad ditional preemergence grass control
provided sugarcane has not emerged.
DIRECTIONS FOR USE IN SUNFLOWER[*] AND SAFFLOWER[*]
[*][NOT FOR USE IN CALIFORNIA]
HARVEST AID
RESTRICTIONS
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb. a.i.) per acre during a single application.
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb. a.i.) per acre per year.
x DO NOT make more than 1 application per year.
x DO NOT harvest within 5 days of application.
Desiccation from LPI Flumi 51 requires the addition of an agronomically appr oved adjuvant to the spray mixture. Use a
methylated seed oil which contains at least 15% emulsifiers an d 80% oil at 1 qt./A. A spray gr ade nitrogen source (either
ammonium sulfate at 2 to 2.5 lbs./A or a 28 to 32% nitrogen solution at 1 to 2 qts./A) may be added to the spray mixture
along with methylated seed oil to enhance desiccation. The ad dition of a nitrogen source does not replace the need for
methylated seed oil. Tank mixing LPI Flumi 51 with glyphosate or paraquat will increase control of emerged weeds and aid in
harvest for sunflowers. Tank mixing LPI Flumi 51 with glyphosate will increase cont rol of emerged weeds and aid in the
harvest for safflower.
TIMING TO SUNFLOWER AND SAFFLOWER
Apply LPI Flumi 51 , at 1.5 to 2 oz./A, when crop is mature (when seed is 35% moisture or le ss). For many varieties, this is
when the backs of the heads are turning yellow and the bracts are turning brown. Sunflower and safflower can be harvested
5 days after application.
To ensure thorough coverage, use 15 to 30 gallons of spray solution per acre and select nozzle type using manufacturer's
gallonage and pressure specifications for postemergence application.
DIRECTIONS FOR USE IN SWEET POTATO
For Use in the States of Arizona, California and Hawaii Only
RESTRICTIONS
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb a.i) per acre per single application.
x DO NOT apply more than 3 oz. of LPI Flumi 51 (0.096 lb. a.i.) per acre per year.
x DO NOT make more than 1 application per year.
x DO NOT apply postemergence to sweet potatoes.
x DO NOT use greenhouse grown transplants.
51
x DO NOT use transplants harvested more than 2 days prior to transplanting.
x DO NOT use on any sweet potato variety other than "BEAUREGARD", unless user has tested LPI Flumi 51 on other variety
and has found crop tolerance to be acceptable.
x DO NOT apply as a part of any tank mix, except with labeled rates of Comman d, if tank mix is applied prior to
transplanting.
TIMING TO SWEET POTATOES
LPI Flumi 51 must be applied prior to transplanting sweet potatoes.
TIMING TO WEEDS
Preemergence to Weeds
Apply LPI Flumi 51 to soil prior to transplanting sweet potato slips for the preemergence control of the weeds listed in Table
1.
DIRECTIONS FOR USE IN WHEAT[*]
[*][NOT FOR USE IN CALIFORNIA]
RESTRICTIONS
x DO NOT apply more than 2 oz. of LPI Flumi 51 (0.064 lb. a.i.) per acre during a single application.
x DO NOT apply more than 2 oz. of LPI Flumi 51 (0.064 lb. a.i.) per acre per year.
x DO NOT make more than 1 application per year.
PRE-PLANT APPLICATIONS, PRE-EMERGENCE WEED CONTROL
For Use in the States of DE, ID, KY, MD, MN, MT, NC, ND, NJ, OR, PA, SC, SD, TN, VA, WA and WI Only
RESTRICTIONS
x For pre-plant weed control, use only on no-till or minimum tillage fields where the previous year's crops residue has not
been incorporated into the soil.
x [Plant wheat no sooner than 7 days after LPI Flumi 51 application in the states of DE, KY, MD, NC, NJ, PA, SC, TN, or VA,]
x [Plant wheat no sooner than 14 days after LPI Flumi 51 application in the states of ID, MN, MT, ND, OR, PA, SD, WA or
WI]
x [DO NOT use on Durum wheat.]
x DO NOT irrigate between emergence and spike.
x Wheat must be planted a minimum of 1" deep.
x DO NOT graze until wheat has reached 5 inches in height.
Burndown Use Directions
LPI Flumi 51, applied as part of a burndown program, at 2 oz./A, may be used for residual weed control, as well as to assist
in postemergence burndown of many weeds where wheat will be planted directly into the residue of the previous crop. See
Directions for Use in Fall Burndown Progra ms in Fields to be Planted to Barley, Field Pea, Flax, Lentil, Safflower, Sunflower
and Spring Wheat for rates and timing of ap plications. For control of emerged weeds, LPI Flumi 51 must be applied with an
appropriate burndown tank mix partner. To ensure thorough co verage, use a minimum of 15 gallons of spray solution per
acre. Refer to tank mix partner's label for directed adjuvant systems.
POST-PLANT, PRE-EMERGENCE WEED CONTROL
RESTRICTIONS
x For post-plant, pre-emergence weed control, use only on no-till or minimum tillage fields where the previous crop residue
has not been incorporated into the soil.
x Apply LPI Flumi 51 up to 2 days after planting.
x [DO NOT use on Durum wheat.]
x DO NOT irrigate between emergence and spike.
52
x Wheat must be planted a minimum of 1" deep.
x DO NOT graze until wheat has reached 5 inches in height.
Use Directions
LPI Flumi 51 , applied at 2 oz./A, may be used for residual weed c ontrol, where wheat has been planted directly into the
residue of the previous year. Application must be made no later than 2 days after planting.
HARVEST AID
RESTRICTION
x DO NOT harvest within 10 days of application.
Use Directions
LPI Flumi 51 , applied at 2 oz./A for desiccation requires the addition of an agronomically approved adjuvant to the spray
mixture. Use a methylated seed oil which contains at least 15 % emulsifiers and 80% oil at 1 qt./A. A spray grade nitrogen
source (either ammonium sulfate at 2 to 2.5 lbs./A or a 28 to 32% nitrogen solution at 1 to 2 qts./A) may be added to the
spray mixture along with methylated seed oil to enhance desiccation. The addition of a nitrogen source does not replace the
need for methylated seed oil. Tank mixing LPI Flumi 51 with glyphosate will increase c ontrol of emerged weeds and aid in
harvest.
To ensure coverage, use a minimum of 10 gallons spray solution per acre by ground application and a minimum of 5 gallons
per acre by aerial application. Nozzle selection must meet manufacturer's gallonage and pressure specifications for
postemergence application.
TIMING TO WHEAT
Apply LPI Flumi 51, at 1.5 to 2 oz./A, after wheat reaches the hard dough stage and grain has no more than 30% moisture.
Wheat can be harvested 10 days after application. Loveland Products, Inc. advises tank mixing with glyphosate.
DIRECTIONS FOR USE IN BUSHBERRIES, CANEBERRY, CITRUS FRUIT, GRAPE, TREE NUT,
OLIVE, POME FRUIT, POMEGRANATE, STONE FRUIT AND NON-BEARING FRUIT TREES
Bushberry (Subgroup 13-07B): Aronia Berry, Blueberry, Highbus h; Blueberry, Lowbush; Buffalo Currant; Chilean Guava;
Cranberry, Highbush; Currant, Black; Currant, Red; Elderb erry, European Barberry, Gooseberry, Honeysuckle edible;
Huckleberry; Jostaberry; Juneberry (Saskatoon Berry); Ligonberry; Na tive Currant; Salal; Sea Buckthorn; cultivars, varieties,
and/or hybrids of these.
Caneberry (Subgroup 13-07A): Blackberry, Loganberry, Black Raspberry, Red Raspberry, Wild Raspberry cultivars, varieties
and/or hybrids of these.
Citrus Fruit (Crop Group 10-10): Australian Desert Lime; Australian Finger-lime; Australian Round Lime; Brown River Finger
Lime; Calamondin; Citron; Citrus hybrids; Grapefruit; Japane se Summer Grapefruit; Kumquat; Lemon; Lime; Mediterranean
Mandarin; Mount White Lime; New Guinea Wild Lime; Orange, Sour; Orange, Sweet; Pummelo; Russell River Lime; Satsuma
Mandarin; Sweet Lime; Tachibana Orange; Tahiti Lime; Tangelo; Tanerine (mandarin); Tangor; Trifoliate Orange; Uniq Fruit;
cultivars, varieties and/or hybrids of these.
Tree Nut (Crop Group 14-12): African Nut-tree; Almond, Beechnut; Brazil Nut; Brazilian Pine; Bunya; Bur Oak; Butternut; Cajou
Nut; Candlenut; Cashew; Chestnut; Chinquapin; Coconut; Coquito Nut; Dika Nut; Ginko; Guiana Chestnut; Hazelnut (Filbert);
Heartnut; Hickory Nut; Japanese Horse-chestnut; Macadamia Nut; Mongongo Nut; Monkey-pot; Monkey Puzzle Nut; Okari
Nut; Pachira Nut; Peach Palm Nut; Pecan; Pequi; Pili Nut; Pine Nut; Pistachio; Sapucaia Nut; Tropical Almond; Walnut, Black;
Walnut, English; Yellowhorn, cultivars, varieties and/or hybrids of these.
Pome Fruit (Crop Group 11-10): Apple; Azarole; Crabapple; Loq uat; Mayhaw; Medlar; Pear; Pear, Asian; Quince; Quince,
Chinese; Quince, Japanese; Tejocote; cultivars, varieties and/or hybrids of these.
Stone Fruit (Crop Group 12-12): Apricot; Ap ricot, Japanese; Capulin; Cherry, Black; Cherry, Nanking; Cherry, Sweet; Cherry,
Tart; Jujube, Chinese; Nectraine; Peach; Plum; Plum, American; Plum, Beach; Plum, Canada; Plum, Cherry; Plum, Chickasaw;
Plum, Damson; Plum, Japanese; Plum, Klamath; Plum, Prune; Plumcot; Sloe and cultivars, varieties and/or hybrids of these.
53
RESTRICTIONS
x DO NOT apply more than 12 oz. of LPI Flumi 51 (0.383 lb. a.i.) per acre during a single application, except Caneberries;
for caneberries DO NOT apply more than 6 oz. LPI Flumi 51 (0.191 lb. a.i.) per acre during a single application.
x DO NOT apply more than 24 oz. of LPI Flumi 51 (0.765 lb. a.i.) per acre per year, except Bushberries; for Bushberries DO
NOT apply more than 12 oz. of LPI Flumi 51 (0.383 lb. a.i.) per acre per year; Caneberries DO NOT apply more than 6 oz.
(0.191 lb. a.i.) per acre per year.
x DO NOT make more than 2 applications per year.
x DO NOT make a sequential application within 30 days of the first application, except nut trees, DO NOT make a sequential
application within 60 days of the first application.
x DO NOT apply to farm alleys or roads where traffic may result in treated dust settling onto crops or other desirable
vegetation.
x DO NOT apply within 300 yards of non-dormant pome fruit and stone fruit.
x DO NOT apply to powdery soils or soils that are susceptible to wind displacement unless irrigation can be applied
immediately after application.
x DO NOT mow treated areas between bud break and final harvest. Dust created by mowing may drift onto desirable
vegetation resulting in injury.
x DO NOT apply to nut trees established less than one year, un less protected from spray contact by non-porous wraps,
grow tubes, or waxed containers.
x Preharvest Interval (PHI)
o Citrus Fruit: 3 days
o Bushberries: 7 days
o Caneberries: 7 days
o Grape: 60 days
o Nut Trees: 60 days
o Olive: 60 days
o Pome Fruit: 60 days
o Pomegranate: 60 days
o Stone Fruit: 60 days
x Use a maximum LPI Flumi 51 rate of 6 oz./A (0.191 lb. a.i.) per application on any soil that has a sand plus gravel content
over 80% if bushes, trees or vines are less than 3 years of age. (Two applications of 6 oz./A in a 12 month period can still
be made as long as there have been 60 days between applications).
PRECAUTIONS
x Raise mower height during all mowing to reduce dust. Dust created by mowing can drif t onto desirable vegetation
resulting in injury.
x Follow the most restrictive label limitations and precautions of the tank mix product(s) being used.
x Avoid direct or indirect spray contac t to foliage and green bark (non-barked trunk and non-barked vines with the
exception of undesirable suckers).
x Irrigate after application with minimum of ¼ inch of water to activate the herbicide and to reduce wind displacement of
soil.
For bushberries, caneberries, citrus fruit, grape, nut trees, olive, pomegranate and non-bearing fruit trees, apply LPI Flumi 51
as a uniform broadcast application to the orchard or vineyard floor or as a uniform band dire cted at the base of the bush,
trunk or vine. For stone fruit and pear, LPI Flumi 51 can only be applied as a uniform ba nd directed at the base of the trunk
prior to "bud break". For apple, LPI Flumi 51 can only be applied as a uniform band directed at the base of the trunk prior to
"pink bud". For other pome fruit, check with your Loveland Products, Inc. representative for application timing. The preferred
application timing for LPI Flumi 51 is in the fall to maximize the potential fo r rainfall to activate and set the herbicide. DO
NOT apply over the top of crop or allow spray to come in contact with crop as a result of application or drift.
Preemergence Application
Apply 6 to 12 oz. (0.188 to 0.38 lb. ai/A) (maximum of 6 oz./A for caneberries) of LPI Flumi 51 per broadcast acre as a
preemergence application. Make preemergence (to weed emergence) applications of LPI Flumi 51 to a weed-free soil surface.
Preemergence applications of LPI Flumi 51 must be completed prior to weed emergence. Moisture is necessary to activate
54
LPI Flumi 51 on soil for residual weed control. Dry weather following application of LPI Flumi 51 may reduce effectiveness.
However, when adequate moisture is received after dry conditions, LPI Flumi 51 will control susceptible germinating weeds.
Postemergence Application
If weeds are emerged at the time of application, apply 6 to 12 oz. (0.188 to 0.38 lb. ai/A) (maximum 6 oz./A for caneberries)
of LPI Flumi 51 per broadcast acre plus an adjuvant (0.25% v/v non-io nic surfactant or 1 qt./A crop oil concentrate). The
addition of an adjuvant enhances LPI Flumi 51 activity on emerged weeds. Thorough spray coverage is necessary to maximize
the postemergence activity of LPI Flumi 51. LPI Flumi 51 will not control emerged weeds wi thout the addition of a labeled
burndown product.
Refer to Table 10, Weeds Controlled by Preemergence Application of LPI Flumi 51 for weeds controlled by the residual activity
of LPI Flumi 51. Tank mix LPI Flumi 51 with a labeled burndown herb icide for control of the emerged weeds listed in Table
13. Refer to tank mix partner's label for additional weed spec ies and increased weed heights claimed. Refer to tank mix
partner's label for additional restrictions, including minimum carrier volume and crops in which tank mix partner may be
used. Tank mixes with glyphosate or 2,4- D containing products are not advised duri ng the period after bloom through final
harvest to ensure crop safety from drift.
Residual weed control will be reduced if vegetation prevents the LPI Flumi 51 from reaching the soil surface. If vegetation is
heavy, it is advised to use a burndown herbicide with LPI Flumi 51 and make a sequential LPI Flumi 51 application prior to
the emergence of new weeds.
Carrier Volume and Spray Pressure
To ensure thorough coverage in burndown applications, use a mini mum of 15 gallons of spray solution per acre. Use higher
gallonage if dense vegetation or heavy crop residue is present.
Nozzle selection must meet manufacturer's gallonage and pressure specifications.
Banded Application
Rates listed in Table 13, Weeds Controlled by Postemergence Activity of LPI Flumi 51 Tank Mixes , refer to a broadcast
application covering the entire acre. Re fer to the Band Application table in Use Information section to calculate amount
needed per acre when making a banded application.
USE RESTRICTIONS FOR BUSHBERRIES
x DO NOT use in the states of Idaho, Oregon or Washington ex cept west of the Cascade Mountains in the following
counties:
Oregon: Benton, Clackamas, Clatsop, Columbia, Coos, Curry, Do uglas, Jackson, Josephin e, Lane, Lincoln, Linn,
Marion, Multnomah, Polk, Tillamook, Umatilla, Yamhill and Washington
Washington: Benton, Clallam, Clark, Cowlitz, Franklin, Grant, Gr ays Harbor, King, Jefferson, Kitsap, Lewis, Pacific,
Pierce, Skagit, Snohomish, Thurston, Wahkiakum, Walla Walla and Whatcom
x DO NOT apply to bushberries established less than 2 years unless they are protected from spray contact by non-porous
wrap, grow tubes or waxed containers.
x DO NOT apply more than 12 oz. of LPI Flumi 51 (0.383 lb. a.i.) per acre during a single application.
x DO NOT apply more than 12 oz. of LPI Flumi 51 (0.383 lb. a.i.) per acre per year.
x DO NOT make more than 1 application per year.
x DO NOT apply to farm alleys or roads where traffic may result in treated dust settling onto crops or other desirable
vegetation.
USE RESTRICTIONS FOR GRAPES
x DO NOT apply to grapes established less than 2 years unless they are trellised at least 3 ft. from the soil surface or are
protected from spray contact by non-porous wrap, grow tubes or waxed containers.
x DO NOT apply to grapes that are not trellised or staked unless they are free standing.
x Avoid direct or indirect spray contact to foliage and green bark (non-barked vine s, with the exception of undesirable
suckers).
55
x Plant new plantings of "own-rooted varieties", for example, Concord, so that all roots are a minimum of 8 inches below
the soil surface to be treated. In some situations, this may require hilling soil around newl y planted vines so that the
settled depth of the hill will be 4 to 5 inches above the vineyard floor.
x DO NOT apply more than 12 oz. of LPI Flumi 51 (0.383 lb. a.i.) per acre during a single application.
x DO NOT apply more than 24 oz. of LPI Flumi 51 (0.765 lb. a.i.) per acre per year.
x DO NOT make more than 2 applications per year.
x DO NOT make a sequential application within 30 days of the first application.
x DO NOT apply to farm alleys or roads where traffic may result in treated dust settling onto crops or other desirable
vegetation.
x DO NOT apply to powdery soils or soils that are susceptible to wind displacement unless irrigation can be applied
immediately after application.
x DO NOT mow treated areas between bud break and final harvest. Dust created by mowing may drift onto desirable
vegetation resulting in injury.
Juice, Raisin and Wine Grapes
x DO NOT apply during the period after b ud break through final harvest, unless using shielded application
equipment and applicator can ensure spra y drift will not come in contact wi th crop fruit or foliage. Shielded
applications during this time period must not be made with glyphosate or products containing glyphosate.
x DO NOT apply more than 12 oz. of LPI Flumi 51 (0.383 lb. a.i.) per acre during a single application.
x DO NOT apply more than 24 oz. of LPI Flumi 51 (0.765 lb. a.i.) per acre per year.
x DO NOT make more than 2 applications per year.
x DO NOT make a sequential application within 30 days of the first application.
x DO NOT apply to farm alleys or roads where traffic may res ult in treated dust settling onto crops or other
desirable vegetation.
x DO NOT apply to powdery soils or soils that are susceptible to wind displacement unless irrigation can be applied
immediately after application.
x DO NOT mow treated areas between bud break and final ha rvest. Dust created by mowing may drift onto
desirable vegetation resulting in injury.
Table Grapes
x LPI Flumi 51 may be applied during the period following final harvest up to bud break.
x DO NOT apply after bud break.
x DO NOT apply more than 12 oz. of LPI Flumi 51 (0.383 lb. a.i.) per acre during a single application.
x DO NOT apply more than 24 oz. of LPI Flumi 51 (0.765 lb. a.i.) per acre per year.
x DO NOT make more than 2 applications per year.
x DO NOT make a sequential application within 30 days of the first application.
x DO NOT apply to farm alleys or roads where traffic may res ult in treated dust settling onto crops or other
desirable vegetation.
x DO NOT apply to powdery soils or soils that are susceptible to wind displacement unless irrigation can be applied
immediately after application.
x DO NOT mow treated areas between bud break and final ha rvest. Dust created by mowing may drift onto
desirable vegetation resulting in injury.
USE PRECAUTIONS FOR CITRUS FRUIT, TREE NUTS, OLIVE, POME FRUIT, POMEGRANATE AND STONE
FRUIT
x For pome fruit and stone fruit, LPI Flumi 51 can only be applied as a uniform band directed at the base of the trunk prior
to silver tip in apples and bud break in stone fruit.
x For pome fruit and stone fruit DO NOT apply to row middles (area between berms)
x For nut trees, olive and pomegranate apply after bud break through final harvest using shielded application equipment
if the applicator can ensure the spray drift will not come into contact with non-target vegetation, crop fruit and/or foliage.
Shielded application equipment is not required if the following application parameters are followed:
 Application pressure (at boom) < 30 PSI.
56
 Application speed < 5 MPH.
 Applicator can ensure the spray drift will not come into contact with non-target vege tation, crop fruit and/or
foliage.
x DO NOT apply more than 12 oz. of LPI Flumi 51 (0.383 lb. a.i.) per acre during a single application.
x DO NOT apply more than 24 oz. of LPI Flumi 51 (0.765 lb. a.i.) per acre per year.
x DO NOT make more than 2 applications per year.
x DO NOT make a sequential application within 60 days of the first application.
x DO NOT apply to farm alleys or roads where traffic may result in treated dust settling onto crops or other desirable
vegetation.
x DO NOT apply within 300 yards of non-dormant pome fruit and stone fruit.
x DO NOT apply to powdery soils or soils that are susceptible to wind displacement unless irrigation can be applied
immediately after application.
x DO NOT mow treated areas between bud break and final harvest. Dust created by mowing may drift onto desirable
vegetation resulting in injury.
x DO NOT apply to nut trees established less than one year, un less protected from spray contact by non-porous wraps,
grow tubes, or waxed containers.
USE RESTRICTIONS FOR CITRUS FRUIT, TREE NUTS, OLIVE, POME FRUIT, POMEGRANATE AND STONE
FRUIT
x California Only: For almonds and stone fruit in the counties of Merced, San Joaquin and Stanislaus, refer to use
precautions below.
x DO NOT apply to pears in the states of Oregon or Washington.
x DO NOT apply to trees established less than one year, unless protected from spray contact by non-porous wraps, grow
tubes, paint or waxed containers.
x DO NOT use in the states of Oregon or Washington except in the following counties unless the additional restrictions
listed below are followed:
Oregon: Benton, Clackamas, Clatsop, Columbia, Coos, Curry, Do uglas, Jackson, Josephin e, Lane, Lincoln, Linn,
Marion, Morrow, Multnomah, Polk, Tillam ook, Umatilla, Yamhill and Washington Washington: Clallam, Cowlitz,
Grays Harbor, King, Jefferson, Kitsap, Lewis, Pacific, Pierce, Skagit, Snohomish, Thurston, Wahkiakum and Whatcom
 For apples east of the Cascade Mountains in Washington (counties not listed above), follow the restrictions above
plus:
o Apply between final harvest and January 1.
o Apply only to apple blocks with an established (2 years or older) permanent cover crop that covers a
minimum of 60% of the surface area in the block.
o Application must be incorporated with a minimum of one half inch of water within 48 hours after
application.
o DO NOT apply to powdery soils or soils susceptible to wind displacement.
o Apply only to orchard berms.
o DO NOT mow the treated berm areas of the orchard.
x DO NOT apply more than 12 oz. of LPI Flumi 51 (0.383 lb. a.i.) per acre during a single application.
x DO NOT apply more than 24 oz. of LPI Flumi 51 (0.765 lb. a.i.) per acre during a 12 month period.
x DO NOT make more than 2 applications per year.
x DO NOT make a sequential application within 60 days of the first application.
x DO NOT apply to farm alleys or roads where traffic may result in treated dust settling onto crops or other desirable
vegetation.
x DO NOT apply within 300 yards of non-dormant pome fruit and stone fruit.
x DO NOT apply to powdery soils or soils that are susceptible to wind displacement unless irrigation can be applied
immediately after application.
x DO NOT mow treated areas between bud break and final harvest. Dust created by mowing may drift onto desirable
vegetation resulting in injury.
57
x DO NOT apply to nut trees established less than one year, un less protected from spray contact by non-porous wraps,
grow tubes, or waxed containers.
USE RESTRICTIONS ON ALMONDS AND STONE FRUIT IN DEFINED AREAS OF MERCED, SAN JOAQUIN
AND STANISLAUS COUNTIES OF CALIFORNIA
The use of LPI Flumi 51 in soils common in parts of Merced, San Joaquin and Stanislaus counties in California is known to have
resulted in injury to almonds under drought stress conditions. These soils are characterized by having been cut or filled, high
sand content, low clay content and shallow profiles. The Defi ned Area can be seen on the Ma p or by the description that
follows:
x Intersection of Highway 4 and Escalon-Bellota Road at Farmington in San Joaquin County;
x Directly South on Escalon-Bellota to the Santa Fe Avenue and railroad tracks at Escalon;
x Southeast on Santa Fe Avenue down to the Merced River;
x East following the Merced River to the Merced/Mariposa County line;
x Northwest following the Merced County line through the intersection of Merced and Stanislaus County line following the
Stanislaus/Tuolumne County and Calaveras County line to Highway 4;
x West on Highway 4 back to the Farmington intersection of Escalon - Bellota Road.
USE RESTRICTIONS FOR NON-BEARING FRUIT TREES
Non-Bearing Avocado and Fig
x DO NOT apply more than 12 oz. of LPI Flumi 51 (0.383 lb. a.i.) per acre during a single application.
x DO NOT apply more than 24 oz. of LPI Flumi 51 (0.765 lb. a.i.) per acre during a 12 month period.
x DO NOT make more than 2 applications per year.
x DO NOT harvest fruit from treated trees within one year of application.
x DO NOT apply to trees established less than one year, unless protected from spray contact by non-porous wraps, grow
tubes or waxed containers.
x DO NOT apply during the period after flowering through leaf drop, unless using shielded application equipment and the
applicator can ensure spray drift will not come in contact with the crop foliage.
x DO NOT make a sequential application within 60 days of the first application.
x DO NOT apply to farm alleys or roads where traffic may result in treated dust settling onto crops or other desirable
vegetation.
x DO NOT apply within 300 yards of non-dormant pome fruit and stone fruit.
x DO NOT apply to powdery soils or soils that are susceptible to wind displacement unless irrigation can be applied
immediately after application.
x DO NOT mow treated areas between bud break and final harvest. Dust created by mowing may drift onto desirable
vegetation resulting in injury.
x DO NOT apply to nut trees established less than one year, un less protected from spray contact by non-porous wraps,
grow tubes, or waxed containers.
58
Table 13. Weeds Controlled by Postemergence Activity of LPI Flumi 51 Tank Mixes
BROADLEAF WEED SPECIES
COMMON NAME SCIENTIFIC NAME
WEED HEIGHT/LENGTH
(inches)
LPI Flumi 51 HERBICIDE
RATE
Bindweed, Field1 Convolvulus arvensis 8 6 to 12 oz./A
Carpetweed Mollugo verticillata 4
Chickweeds
Common Stellaria media 4
Mouseear Cerastium vulgatum 4
Cocklebur, Common Xanthium strumarium 4
Eveningprimrose, Cutleaf2 Oenothera laciniata 12
Filaree
Broadleaf Erodium botrys 4
Redstem Erodium cicutarium 4
Florida Beggarweed Desmodium tortuosum 2
Hemp Sesbania Sesbania exaltata 8
Jimsonweed Datura stramonium 4
Lambsquarters, Common Chenopodium album 4
Morningglories
Entireleaf Ipomoea hederacea var. integriuscula 4
Ivyleaf Ipomoea hederacea 4
Pitted Ipomoea lacunose 6
Red/Scarlet Ipomoea coccinea 4
Tall Ipomoea purpurea 4
Mustard, Wild Brassica kaber 6
Pigweeds
Palmer Amaranth Amaranthus palmeri 6
Redroot Amaranthus retroflexus 6
Smooth Amaranthus hybridus 6
Plantain, Broadleaf Plantago major 6
Prickly Sida (Teaweed) Sida spinosa 6
Purslanes
Common Portulaca oleracea 4
Rock Calandrinia spp. 2
Ragweeds
Common Ambrosia artemisiifolia 2
Giant Ambrosia trifida 4
Rice Flatsedge Cyperus iria 4
Sicklepod Senna obtusifolia 4
Smartweeds
Ladysthumb Polygonum persicaria 4
Pale Polygonum lapathifolium 4
Pennsylvania Polygonum pensylvanicum 4
Spotted Spurge Euphorbia maculata 4
Velvetleaf Abutilon theophrasti 4
Venice Mallow Hibiscus trionum 4
Waterhemps
Common Amaranthus rudis 2
Tall Amaranthus tuberculatus 2
59
1 LPI Flumi 51 will only provide control of the above ground portion of bindweed. Repeated applications will be needed to
control regrowth.
2 For acceptable control, cutleaf eveningp rimrose must be 12 inches or less an d in the rosette stage. Add crop oil
concentrate, at 1 pt./A, or non-ionic surfactant at 0.25% v/v, to glyphosate tank mixes for cutleaf eveningprimrose
control, including glyphosate formulations that contain a built-in adjuvant system.
ADDITIONAL RESIDUAL WEED CONTROL
LPI Flumi 51 may be tank mixed with oryzalin, simazine or diuron for additional residual weed control. Always read and follow
label use directions for all products being used.
DIRECTIONS FOR USE TO MAINTAIN BARE GROUND ON NON-CROP AREAS OF FARMS,
ORCHARDS AND VINEYARDS
RESTRICTIONS
x DO NOT apply to farm alleys or roads where traffic may result in treated dust settling onto crops or other desirable
vegetation.
x DO NOT apply to ditch banks.
x As a preemergent application , DO NOT apply more than 12 oz (0.38 lb. ai/A) per acre per year.
x As a postemergent application, DO NOT apply more than 12 oz (0.38 lb. ai/A) per acre per year.
LPI Flumi 51, when used as directed, can be used on farms, orchar ds and vineyards for non-selective vegetation control to
maintain bare ground on non-crop areas that must be kept weed free. Follow all applicable directions as outlined above under
"USE INFORMATION".
LPI Flumi 51 offers residual and postemergence control of susceptibl e broadleaf and grass weeds as well as an additional
mode of action to assist in the control of ALS (acetolactate synthase) resistant weeds. LPI Flumi 51 can be tank mixed with
the herbicides listed in Table 14 for increased residual or postemergence control. The length of residual control is dependent
on the rate applied as well as on rainfall and temperature conditions. Length of residual control will decrease as temperature
and precipitation increase. LPI Flumi 51 rates of 6 to 12 oz./A are required to prov ide residual control of the weeds listed in
Table 10.
PREEMERGENCE APPLICATION
Apply 6 to 12 oz. (0.188 to 0.38 lb. ai/A) of LPI Flumi 51 per broadcast acre as a preemergence application. Make
preemergence (prior to weed emergence) applications of LPI Flumi 51 to a weed-free soil surface. Preemergence applications
of LPI Flumi 51 must be completed prior to weed emergence. Moisture is necessary to activate LPI Flumi 51 on soil for residual
weed control. Dry weather following application of LPI Flumi 51 may reduce effectiveness. However, when adequate
moisture is received after dry conditions, LPI Flumi 51 will control susceptible germinating weeds.
POSTEMERGENCE APPLICATION
Apply 6 to 12 oz. (0.188 to 0.38 lb. ai/A) of LPI Flumi 51 per broadcast acre plus an adjuvant (0.25% v/v non-ionic surfactant
or 1 qt./A crop oil concentrate). Th e addition of an adjuvant enhances LPI Flumi 51 activity on emerged weeds. Thorough
spray coverage is necessary to maxi mize the postemergence activity of LPI Flumi 51 . Emerged weeds are controlled
postemergence with LPI Flumi 51, however, translocation of LPI Flumi 51 within a weed is limited, and control is affected by
spray coverage and by the addition of an adjuvant. The most effective postemergence weed control with LPI Flumi 51 occurs
when applied in combination with a surfactant to weeds less than 2 inches in height. Use a tank mix partner in combination
with LPI Flumi 51 for the postemergence control of weeds larger than 2 inches. Advised tank mix partners are listed in Table
14.
IMPORTANT: Completely read and follow the label of any potential tank mix partner with LPI Flumi 51 . When using tank
mixtures, use conditions must be in accord ance with the most restrictive of the label limitations and precautions on either
herbicide label.
Table 14. Tank Mix Combination to Maintain Bare Ground on Non-Crop Areas
glyphosate 2,4-D glufosinate paraquat
60
STORAGE AND DISPOSAL
DO NOT contaminate water, food or feed by storage, disposal or cleaning of equipment.
STORAGE: Keep pesticide in original container. Store in a cool, dry, secure place. DO NOT put formulation or dilute spray
solution into food or drink containers. DO NOT contaminate food or foodstuffs. DO NOT store or transport near feed or
food. Not for use or storage in or around the home.
PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be disposed of on site or at an approved waste
disposal facility.
CONTAINER HANDLING:
[Container statement for Nonrefillable container small enough to shake] [Nonrefillable container. DO NOT reuse or refill
this container. Offer for recycling, if available. Triple rinse container (or equivalent) promptly after emptying. Triple rinse
as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container ¼ full with water and
recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal.
Drain for 10 seconds after the flow begins to drip. Repeat th is procedure two more times. Then offer for recycling, if
available or puncture and dispose of in a sanitary landfill.]
[Container statement for Nonrefillable container with liner greater than 50 lbs.] [Nonrefillable bag: DO NOT reuse or refill
this bag. Completely empty bag by shaking and tapping sides and bottom to loosen clinging particles. Empty residue into
equipment. DO NOT reuse bag. Dispose of bag in a sanitary landfill or by incineration if allowed by State and local
authorities. Offer for recycling if available. Liner: Completely empty liner by shaking and tapping sides and bottom to loosed
clinging particles. Emp ty residue into equipment. DO NOT reuse liner. Dispose of liner in a sanitary landfill or by
incineration if allowed by State and local authorities.]
[Container statement for Nonrefillable drum with liner] [Nonrefillable container: DO NOT reuse or refill this container.
Offer for recycling if available. Clean container promptly af ter emptying. Triple rinse as follows: Empty the remaining
contents into application equipment or a mix tank. Fill the container ¼ full with water. Re place and tighten closures. Tip
container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the
container on its end and tip it back and forth several times. Turn the container over onto its other end and tip it back and
forth several times. Empty the rinsate into application equipm ent or a mix tank or store rinsate for later use or disposal.
Repeat this procedure two more times. Liner: Completely empty liner by shaking and tapping sides and bottom to loosen
clinging particles. Empty residue into equipment. DO NOT reuse liner. Dispose of liner in a sanitary landfill or by incineration
if allowed by State and local authorities.]
CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY
BEFORE BUYING OR USING THIS PRODUCT, read the entire Dire ctions for Use and the following Conditions of Sale and
Limitation of Warranty and Liability. By buying or using this product, the bu yer or user accepts the following Conditions of
Sale and Limitation of Warranty and Liabili ty, which no employee or agent of LOVELAND PRODUCTS, INC. or the seller is
authorized to vary in any way.
Follow the Directions for Use of this product carefully. It is impossible to eliminate all risks inherently associated with the use
of this product. Crop or other plant injury, ineffectiveness, or other unintended consequences may result from such risks as
weather or crop conditions, mixture with ot her chemicals not specifically identified in this product’s label, or use of this
product contrary to the label instructions, all of which are be yond the control of LOVELAND PRODUCTS, INC. and the seller.
The buyer or user of this product assumes all such inherent risks.
Subject to the foregoing inherent risks, LOVELAND PRODUCTS, INC. warrants that this product conforms to the chemical
description on the label and is reasonably fit for the purposes stated in the Directi ons for Use when the product is used in
strict accordance with such Directions for Use under normal conditions of use. EXCEPT AS WARRANTED IN THIS LABEL AND
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THIS PRODUCT IS SOLD “AS IS,” AND LOVELAND PRODUCTS, INC. MAKES
NO OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING BU T NOT LIMITED TO MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, OR ELIGIBILITY OF THIS PRODUCT FOR ANY PARTICULAR TRADE USAGE.
IN THE UNLIKELY EVENT THAT BUYER OR USER BELIEVES THAT LOVELAND PRODUCTS, INC. HAS BREACHED A WARRANTY
CONTAINED IN THIS LABEL AND TO THE EXTENT REQUIRED BY APPLICABLE LAW, BUYER OR USER MUST SEND WRITTEN
61
NOTICE OF ITS CLAIM TO THE FOLLOWING ADDRESS: LOVELAND PRODUCTS, INC., ATTENTION: LAW DEPARTMENT, P.O. BOX
1286, GREELEY, CO 80632-1286.
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE BUYE R’S OR USER’S EXCLUSIVE REMEDY FOR ANY INJURY, LOSS,
OR DAMAGE RESULTING FROM THE HANDLING OR USE OF T HIS PRODUCT, INCLUDING BUT NOT LIMITED TO CLAIMS OF
BREACH OF WARRANTY OR CONTRACT, NEGLIGENCE, STRICT LIABILITY, OR OTHER TORTS, SHALL BE LIMITED TO ONE OF THE
FOLLOWING, AT THE ELECTION OF LOVELAND PRODUCTS, IN C. OR THE SELLER: DIRECT DAMAGES NOT EXCEEDING THE
PURCHASE PRICE OF THE PRODUCT OR REPLACEMENT OF THE PRODUCT. TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, LOVELAND PRODUCTS, INC. AND THE SELLER SHALL NOT BE LIABLE TO THE BUYER OR USER OF THIS PRODUCT FOR ANY
CONSEQUENTIAL, SPECIAL, OR INDIRECT DAMAGES, OR DAMAGES IN THE NATURE OF A PENALTY.
[LPI Flumi 51] is a trademark of Loveland Products, Inc.
Cobra, Phoenix, Select Max are trademark and registered trademarks of Valent U.S.A. Corporation
Basis, Classic, Express, Lorox and Resolve are trademarks and registered trademarks of E.I. du Pont de Nemours and Company
Command is a registered trademark of FMC Corporation
Asulox is a registered trademark of UPI-USA Crop Protection
Rely is a registered trademark of Bayer
Banvel, Pursuit, Sceptor, Squadron, Steel and Weedmaster are registered trademarks of BASF
Boundary, Dual Magnum, Dual II Magnum and Evik are registered trademarks of Syngenta
FirstRate, Hornet, Python, Sonalan and Surpass are registered trademarks of Dow AgroSciences LLC
Frontier, Outlook, Prowl, and Raptor are registered trademarks of BASF Ag
Roundup, Roundup Ready, Roundup Original, Roundup Power Max and Sempra are registered trademarks of Monsanto Co.
{OPTIONAL GRAPHICS}
{Note to Reviewer: Any of the below graphic(s) may appear anywhere on the label. Further, any of the below graphic(s) may
appear in various colors or black/white and with or without background; not to impact legibility.}
[ ]
[ ]
[]
{LANGUAGE ON LABEL AFFIXED TO CONTAINER}
62
LPI Flumi 51[™]
{Alternate Brand Names:} [Valkos[TM] 51 WDG][FALCO 51 WDG]
ACTIVE INGREDIENT: (% by weight)
Flumioxazin* ................................................................................................ 51.0%
OTHER INGREDIENTS: .................................................................................. 49.0%
TOTAL ........................................................................................................ 100.0%
*2-[7-flouro-3,4-dihydro-3-oxo-4-(2-propynyl)-2H-1,4-benzoxazin-6-yl]-4,5,6,7-
tetrahydro-1H-isoindole-1,3(2H)-dione
LPI Flumi 51 is a water dispersible granule containing 51% active ingredient.
KEEP OUT OF REACH OF CHILDREN
CAUTION
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted
en detalle. (If you DO NOT understand th e label, find someone to explain it to
you in detail.)
FIRST AID
If on skin or
clothing:
x Take off contaminated clothing.
x Rinse skin immediately with plenty of water for 15-20 minutes.
x Call a poison control center or doctor for treatment advice.
If inhaled: x Move person to fresh air.
x If person is not breathing, call 911 or an ambulance, then give
artificial respiration, preferably mouth-to-mouth, if possible.
x Call a poison control center or doctor for further treatment
advice.
If in eyes: x Hold eye open and rinse slowly and gently with water for 15-20
minutes.
x Remove contact lenses, if present, after the first 5 minutes,
then continue rinsing eye.
x Call a poison control center or doctor for treatment advice.
If
swallowed:
x Call a poison control center or doctor immediately for
treatment advice.
x Have person sip a glass of water if able to swallow.
x DO NOT induce vomiting unless told to do so by the poison
control center or doctor.
x DO NOT give anything by mouth to an unconscious person.
HOT LINE NUMBER
Have the product container or label with you when calling a poison control
center or doctor, or going for treatment. You may also contact Rocky Mountain
Poison and Drug Safety at 1-866-944-8565 for emergency medical treatment
information.
For Medical Emergencies or for Chemical Spill, Leak, Fire, or Exposure, Call
CHEMTREC at 1-800-424-9300.PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION
Harmful if absorbed through skin. Harm ful if inhaled. Causes moderate eye
irritation. Avoid contact with skin, eyes or clothing. Avoid breathing dust or spray
mist. Wash thoroughly with soap and water after handling and before eating,
drinking, chewing gum, using tobacco or using the toilet. Remove and wash
contaminated clothing before reuse.
ENVIRONMENTAL HAZARDS
This product is toxic to non-target plants and aquatic invertebrates. DO NOT apply
directly to water, to areas where surface wa ter is present, or to intertidal areas
below the mean high water mark. Drift or runoff may be hazardous to non-target
plants and aquatic organisms in neighboring areas. DO NOT apply where runoff is
likely to occur. DO NOT apply when weather conditions favor drift from treated
areas. DO NOT contaminate water when disposing of equipment washwaters.or
rinsate.
This pesticide is toxic to plants and must be used strictly in accordance with the
drift and run-off precautions on this label in order to minimize off-site exposures.
Under some conditions this product may ha ve a potential to run-off to surface
water or adjacent land. Where possible, use methods which reduce soil erosion,
such as no till, limited till and cont our plowing; these methods also reduce
pesticide run-off. Use of vegetation filt er strips along rivers, creeks, streams,
wetlands or on the downhill side of fields where run-off could occur will minimize
water run-off and is advised.
NON-TARGET ORGANSIM ADVISORY: This pr oduct is toxic to plants and may
adversely impact the forage and habita t of non-target organisms, including
pollinators, in areas adjacent to the treated site. Protect the forage and habitat of
non-target organisms by following label directions intended to minimize spray
drift.
{Note to EPA reviewer: If this product is sh ipped in containers greater than 50 lbs,
the following environmental hazard statement will be added to the label:}
[DO NOT discharge effluent containing this product into lakes, streams, ponds,
estuaries, oceans, or other waters unless in accordance with the requirements of
a National Pollutant Discharge Elimin ation System (NPDES) permit and the
permitting authority has been notifie d in writing prior to discharge. DO NOT
discharge effluent containing this produc t to sewer systems without previously
notifying the local sewage treatment plan t authority. For guidance contact your
State Water Board or Regional Office of the EPA.]
STORAGE AND DISPOSAL
DO NOT contaminate water, food or feed by storage, disposal or cleaning of
equipment.
STORAGE: Keep pesticide in original container. Store in a cool, dry, secure
place. DO NOT put formulation or dilute spray solution into food or drink
containers. DO NOT contaminate food or foodstuffs. DO NOT store or transport
near feed or food. Not for use or storage in or around the home.
PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be
disposed of on site or at an approved waste disposal facility.
CONTAINER HANDLING:
[Container statement for Nonrefillabl e container small enough to shake]
[Nonrefillable container. DO NOT reuse or refill this container. Offer for
recycling, if available. Triple rinse container (or equivalent) promptly after
emptying. Triple rinse as follows: Empty the remaining contents into
application equipment or a mix tank. Fill the container ¼ full with water and
recap. Shake for 10 seconds. Pour rinsat e into application equipment or a mix
tank or store rinsate for later use or disposal. Drain for 10 seconds after the
flow begins to drip. Repeat this procedure two more times. Then offer for
recycling, if available or puncture and dispose of in a sanitary landfill.]
[Container statement for Nonrefillable container with liner greater than 50 lbs.]
[Nonrefillable bag: DO NOT reuse or refill this bag. Completely empty bag by
shaking and tapping sides and bottom to loosen clinging particles. Empty
residue into equipment. DO NOT reuse bag. Dispose of bag in a sanitary landfill
or by incineration if allowed by State and local authorities. Offer for recycling if
available. Liner: Completely empty lin er by shaking and tapping sides and
bottom to loosed clinging particles. Emp ty residue into equipment. DO NOT
reuse liner. Dispose of liner in a sanitary landfill or by incineration if allowed by
State and local authorities.]
[Container statement for Nonrefillable drum with liner] [Nonrefillable
container: DO NOT reuse or refill this container. Offer for recycling if available.
Clean container promptly after emptying. Triple rinse as follows: Empty the
remaining contents into application equipment or a mix tank. Fill the container
¼ full with water. Replace and tighten closures. Tip container on its side and
roll it back and forth, ensuring at least one complete revolution, for 30 seconds.
Stand the container on its end and tip it back and forth several times. Turn the
container over onto its other end and tip it back and forth several times. Empty
the rinsate into application equipment or a mix tank or store rinsate for later
use or disposal. Repeat this procedur e two more times. Liner: Completely
empty liner by shaking and tapping si des and bottom to loosen clinging
particles. Empty residue into equipment. DO NOT reuse liner. Dispose of liner
in a sanitary landfill or by incineration if allowed by State and local authorities.]
See label booklet for additional Precautionary Statements and Directions for Use.
EPA REG. NO.: 34704-1138 EPA EST. NO.:
Manufactured for: [internal label code]
Loveland Products, Inc.[®] [IRRD V1 0526]
P.O. BOX 1286 Greeley, CO 80632-1286 USA
NET WEIGHT:
FLUMIOXAZIN GROUP 14 HERBICIDE