crop-chem-docs/corpus/epa_ppls/70506-310.md

LIFELINE HERBICIDE

• EPA Reg No: 70506-310
• Registrant: UPL NA, INC.
• Signal word: Caution
• Active ingredients: Glufosinate (24.5%)
• Label accepted: 2026-09-15
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/070506-00310-20260915.pdf

---

1 September 15, 2026 Meshea J. Brodie US Regulatory Team Lead UPL NA Inc. P.O. Box 12219 Research Triangle Park, NC 27709 Subject: PRIA Label Amendment – Add already approved uses, incorporate SLN to master label and other label updates Product Name: Lifeline Herbicide EPA Registration Number: 70506-310 Application Date: 04/02/2025 Case Number: 00654531 Dear Meshea J. Brodie, The amended label referred to above, submitted in connection with registration under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), as amended, is acceptable. This approval does not affect any conditions that were previously imposed on this registration. You continue to be subject to existing conditions on your registration and any deadlines connected with them. A stamped copy of your labeling is enclosed for your records. This labeling supersedes all previously accepted labeling. You must submit one copy of the final printed labeling before you release the product for shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may distribute or sell this product under the previously approved labeling for 18 months from the date of this letter. After 18 months, you may only distribute or sell this product if it bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3. Should you wish to add/retain a reference to the company’s website on your label, then please be aware that the website becomes labeling under FIFRA and is subject to review by the Agency. If the website is false or misleading, the product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) lists examples of statements EPA may consider false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims made on the website may not substantially differ from those claims approved through the registration process. Therefore, should the Agency find

Page 2 of 2 EPA Reg. No. 70506-310 Case No. 00654531 or if it is brought to our attention that a website contains false or misleading statements or claims substantially differing from the EPA approved registration, the website will be referred to the EPA’s Office of Enforcement and Compliance. Your release for shipment of the product constitutes acceptance of these conditions. If these conditions are not complied with, the registration will be subject to cancellation in accordance with FIFRA section 6. If you have any questions, please contact Francisco Llarena-Arias at llarena- [email protected]. Nathan Mellor Branch Chief Fungicide Herbicide Branch Registration Division (7505T) Enclosure

Net Contents: gallons [Optional text in brackets] Glufosinate-ammonium GROUP 10 Herbicide LIFELINE® Herbicide Alternate Brand Name: Interline® Herbicide ACTIVE INGREDIENT: Glufosinate-ammonium ......................................................................... 24.5%* OTHER INGREDIENTS.............................................................................................................. 75.5% TOTAL ...................................................................................................................................... 100.0% *Equivalent to 2.34 pounds of active ingredient per U.S. gallon. KEEP OUT OF REACH OF CHILDREN CAUTION Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do not understand the label, find someone to explain it to you in detail.) [SEE [BACK PANEL] [INSIDE BOOKLET] [BELOW] FOR FIRST AID AND ADDITIONAL PRECAUTIONARY STATEMENTS] FIRST AID IF ON SKIN: Ŷ Take off contaminated clothing. Ŷ Rinse skin immediately with plenty of water for 15-20 minutes. Ŷ Call a poison control center or doctor for treatment advice. IF IN EYES: Ŷ Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing. Ŷ Call a poison control center or doctor for treatment advice. IF SWALLOWED: Ŷ Call a poison control center or doctor for treatment advice. Ŷ Have person sip a glass of water if able to swallow. Ŷ DO NOT induce vomiting unless told to by a poison control center or doctor. Ŷ DO NOT give anything by mouth to an unconscious person. Have the product container or label with you when calling a Poison Center or doctor or going for treatment. FOR MEDICAL EMERGENCIES INVOLVING THIS PRODUCT, CALL NATIONAL POISON CONTROL AT 1- 800-222-1222 OR CHEMTREC® TOLL FREE 1-800-424-9300 or 1-703-527-3887 24 hours per day, 7 days per week. For information on this pesticide product (including general health concerns or pesticide incidents), call the National Pesticide Information Center at 1-800-858-7378, Monday through Friday, 8:00 AM to 12:00 PM PST or at http://npic.orst.edu. NOTE TO PHYSICIAN: If this product is ingested, endotracheal intubation and gastric lavage must be performed as soon as possible, followed by charcoal and sodium sulfate administration. You may also contact Rocky Mountain Poison and Drug Safety at 1-866-673-6671 for emergency medical treatment information. For chemical emergency: spill, leak, fire, exposure, or accident, call CHEMTREC at 1-800-424-9300 UPL NA INC. EPA Reg. No. 70506-310 P.O. Box 12219 Research Triangle Park, NC 27709 • 1-800-438-6071 EPA Est. No. 09/15/2026 70506-310

Internal PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS AND DOMESTIC ANIMALS CAUTION Harmful if absorbed through skin. Avoid contact with skin, eyes, or clothing.

Personal Protective Equipment (PPE) Applicators and other handlers must wear: • All handlers must wear long-sleeved shirts, long pants, shoes, and socks. • Applicators using ground boom equipment with open cabs to treat cotton must wear long-sleeved shirts, long pants, shoes, and socks plus chemical-resistant gloves. • Mixer/loaders supporting ground boom applications to corn, canola, soybean, cotton, citrus fruit, pome fruit, stone fruit, and olives must wear long-sleeved shirts, long pants, shoes, and socks plus chemical-resistant gloves. • Mixers/loaders supporting aerial applications to canola, corn, cotton, and soybean must use closed mixing/loading systems. Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product’s concentrate. DO NOT reuse them. Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry.

ENGINEERING CONTROLS STATEMENT When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d) (4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS.

ENVIRONMENTAL HAZARDS DO NOT apply directly to water or to areas where surface water is present. DO NOT apply to intertidal areas below the mean high-water mark. DO NOT contaminate water by cleaning of equipment or disposal of equipment wash waters or rinseate. This pesticide is toxic to vascular plants and must be used strictly in accordance with the drift and run-off precautions on this label in order to minimize off-site exposures. Under some conditions, this product may have the potential to run-off to surface water or adjacent land. Where possible, use methods which reduce soil erosion, including no till, limited till and contour plowing; these methods also reduce pesticide run-off. Use vegetation filter strips along rivers, creeks, streams, wetlands, etc. or on the downhill side of fields where run-off could occur to minimize water runoff.

USER SAFETY RECOMMENDATIONS Users should: Wash hands thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco, orusing the toilet. Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing.

Internal DIRECTIONS FOR USE It is a violation of Federal law to use this product in a manner inconsistent with its labeling. DO NOT use this product until you have read the entire label. DO NOT apply this product in a way that will contactworkers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation. In the State of New York Only: Not For Use In Nassau and Suffolk Counties.

AGRICULTURAL USE REQUIREMENTS Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses; and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE), and restricted-entry intervals. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. Do not enter or allow worker entry into treated areas during the restricted entry-interval (REI) of 12 hours. PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, including plants, soil, or water, is: coveralls worn over short- sleeved shirt and short pants; chemical resistant gloves including barrier laminate, butyl rubber •14 mils, nitrile rubber •14 mils, neoprene rubber •14 mils, polyvinyl chloride (PVC) •14 mils, or Viton ® •14 mils; chemical resistant footwear plus socks; protective eyewear (goggles, face shield or safety glasses). NON AGRICULTURAL USE REQUIREMENTS The requirements in this box apply to uses of this product that are NOT within the scope of the Worker Protection Standard (WPS) for agricultural pesticides (40 CFR P{art 170). The WPS applied when this product is used to produce agricultural plants on farms, forests, nurseries, or greenhouses. The application for trimming and edging, industrial, recreational and public areas, and farmsteads are not within the scope of the WPS. Keep unprotected persons out of treated areas until sprays have dried.

Internal IMPORTANT CROP SAFETY INFORMATION READ BEFORE USING THIS PRODUCT Burndown treatments For row crop applications in canola, corn, sweet corn, cotton, soybean or sugar beets, LIFELINE® herbicide may be applied to any variety as a burndown treatment prior to planting or prior to crop emergence. LIFELINE Herbicide may also be applied as a preplant burndown treatment prior to planting of labelled fruiting vegetables and cucurbits. When applying LIFELINE Herbicide as a preplant burndown treatment prior to planting of fruiting vegetables and cucurbits, ensure that the appropriate rotational interval is observed with respect to planting method, soil texture, and rainfall/irrigation. Regardless of precipitation/irrigation received, do not transplant or direct-seed into or within 6 inches of holes in the plastic mulch that exist at the time of preplant burndown application(s) to plastic mulch covered beds. Failure to observe the respective parameters and use site restrictions can lead to serious crop injury or death. Post emergent treatments Post-emergence row crop applications of LIFELINE Herbicide may be made only to crops resistant to glufosinate.The basis of selectivity of LIFELINE Herbicide in glufosinate-resistant crops is the presence of a gene that makescrops not sensitive to glufosinate. Crops not containing this glufosinate-resistant gene will be sensitive to LIFELINE Herbicide and severe crop injury and/or death may occur. Do not allow spray to contact foliageor green tissue of desirable vegetation other than containing the glufosinate-resistant trait. Post-emergence applications of LIFELINE Herbicide may be applied to cotton not containing the glufosinate- resistant trait using a hooded sprayer. Post-emergence directed applications of LIFELINE Herbicide may applied as hooded row middle applications to fruiting vegetables and cucurbits. Contact of LIFELINE Herbicide spray, drift or mist to crop foliage or fruit will cause severe crop injury or death. Do not spray within 6 inches of running vines when the respective crop is grown on flat beds. Tree, Vine and Berry treatments When applying LIFELINE Herbicide to tree, vine and berry use sites, avoid contact of solution, spray, drift ormist with green bark, stems or foliage, as injury may occur. Only trunks with calloused, mature brown bark may be sprayed unless protected from spray contact by nonporous wraps, grow tubes or waxed containers. Contact of LIFELINE Herbicide with parts of trees, berries or vines other than mature brown bark can result in serious damage.

Grass Grown for Seed Production – ID, OR, WA By using this product for this labeled use, user and/or grower indemnifies UPL NA INC. (UPL) from all liability for failure to perform and/or crop damage from the use of LIFELINE Herbicide on grass grown for seed production only. This product, when used on grass grown for seed production may lead to crop injury, loss, or damage. Because of the risk of failure to perform or crop damage, all such use is at the user and/or grower’s risk. UPL recommends that the user and/or grower test this product in order to determine its suitability for such intended use. UPL makes this product available to the user and/or grower solely to the extend the benefit and utility, in the sole opinion of the user and/or grower, outweigh the potential injury associated with the use of this product. The decision to use or not to use this herbicide must be made by each individual user and/or grower on the basis of possible crop injury from LIFELINE Herbicide, the severity and type of weed infestation, the cost of alternative weed controls, and other factors. UPL will not be responsible for crop injury from tank mixtures of LIFELINE Herbicide with other herbicides or adjuvants to grasses grown for seed production. If the preceding terms and conditions are unacceptable, do not open the product. Return the unopened LIFELINE Herbicide immediately.

Internal

PRODUCT INFORMATION LIFELINE Herbicide is a water-soluble non-selective, broad-spectrum herbicide used for control of annual and perennial grass and broadleaf weeds in a variety of crops. Uses include applications as post-emergence weed control in tree, vine and berry crops for control of emerged weeds; broadcast burndown applications prior to planting or crop emergence in labeled row crops; broadcast burndown applications prior to planting of fruiting vegetables and cucurbits with respect to the appropriate rotational interval and use restriction over-the-top applications in canola, corn, cotton, soybeans and sugar beets designated as glufosinate-resistant; post-emergence directed applications to mid rows of fruiting vegetables and cucurbits using a hooded sprayer; post-emergence weed control in grass grown for seed; and for potato vine desiccation. LIFELINE Herbicide may be used for weed control in non glufosinate-resistant cotton when applied with a hooded sprayer in-crop.

ROTATIONAL CROP RESTRICTIONS1* Rotational crop planting intervals following application of LIFELINE Herbicide are listed below. Failure to comply with these restrictions may result in illegal residues in rotated crops.

Rotational Crop Plant-back Interval (Minimum Rotational Crop Planting Interval from Last Application) Canola, Gold Pleasure of Camelina, Corn, Sweet Corn, Cotton, Soybeans, Sugar Beets

May be planted at any time Cover Crops2* 7 days Transplanted Perennial Crops on label (bushberries group 13-07B, citrus crop group 10-10, olives, pome fruit crop group 11-10, stone fruit crop group 12-12, tree nuts crop group 14-12, fruit, grape (table, wine and raisins), hops, avocado, fig, tropical and subtropical fruit crop groups 23B, 24A, and 24B) 14 days Fruiting Vegetables (crop groups 8-10A and 8-10B) 3 and Cucurbits (crop groups 9A and 9B)3

Direct-Seeding following Preplant Burndown to Bare Soil Surface Soil Texture7 • 0.5 inch of < 0.5 inch of Precipitation4 Precipitation4 Fine 3 days 14 days Medium Coarse 7 days 21 days Transplanting following Preplant Burndown to Bare Soil Surface for All Soils7 • 0.5 inch of Precipitation4 < 0.5 inch of Precipitation4 14 days 21 days Direct-Seeding or Transplanting following Preplant Burndown to Plastic Mulch Covered Beds,4,5,6 for All Soils7 • 0.5 inch of Precipitation2 < 0.5 inch of Precipitation2

3 days

27 days Root and Tuber Vegetables, Leafy Vegetables, Brassica Leafy Vegetables, Small Grains (barley, buckwheat, oats, rye, teosinte, triticale, and wheat).

70 Days

All Other Crops 180 Days 1See application directions for Potato Vine Desiccation and Sugarbeet Sections for Rotational Crop Restrictions specifically after LIFELINE Herbicide applications to potatoes or sugarbeets. 2Cover crops may be planted in fields previously treated with LIFELINE Herbicide when planted for conservation purposes and if the respective cover crops are not grazed by livestock or harvested for food. For best results, DO NOT plant cover crops less than 7 days after an application of LIFELINE Herbicide nor before ½ inch of rainfall or irrigation has occurred. Planting outside of these parameters may result in stand reduction. Other crops listed in the Rotational Crop Restrictions table are considered a rotational crop and may be harvested so long as their respective plant-back interval and other restrictions are observed. Internal

*See application directions for Potato Vine Desiccation for Rotational Crop Restrictions specifically after LIFELINE Herbicide applications to potatoes. See application directions for Sugar Beets for Rotational Crop Restrictions specifically for this crop.

Herbicide Resistance Management LIFELINE Herbicide is a Group 10 herbicide (glutamine synthetase inhibitor). Any weed population may contain or develop plants naturally resistant to this product and other Group 10 herbicides. Weed species with acquired resistance to Group 10 herbicides may eventually dominate the weed population with repeated Group 10 herbicide use in the same field. Appropriate resistance-management strategies should be followed. Fields should be scouted prior to application to determine if weed species present in the intended field are appropriate for an effective application of this herbicide. Fields should also be scouted after application to verify that the herbicide application was successful in controlling the target weed species. Indicators of possible herbicide resistance include:

• Failure to control a weed species normally controlled by the herbicide at the rate applied, especially if control is achieved on adjacent weeds
• A spreading patch of non-controlled plants of a particular weed species
• Surviving plants mixed with controlled individuals of the same species If resistance is suspected, prevent weed seed production in the affected area by an alternative herbicide from a different mode of action or by a mechanical method including hoeing or tillage. Prevent movement of resistant weed seeds to other fields by cleaning harvesting and tillage equipment when moving between fields and planting clean seed. If a weed population continues to progress after treatment with this product, discontinue use of this product and switch to another management strategy or herbicide with a different mode of action, if available. Treat weed escapes with an herbicide with a different mode of action or use non-chemical methods to remove escapes. To the extent possible, do now allow weed escapes to produce seed, roots, or tubers. To delay herbicide resistance, follow as many of these steps as possible:
• Crop rotation: Rotating crops can allow for diversified weed management programs.
• Rotate herbicide-resistant (HR) traits: Rotate HR traits or utilize crops with multiple HR traits to diversify the utilized herbicide modes of action.
• Tank-mix multiple herbicide sites of action: Use tank-mixtures with herbicides from different site(s) of action if such use is permitted. Rotate the herbicide site(s) of action used in a tank-mix both within the growing season and from year to year to reduce the selection pressure placed on a single site of action. Where information on resistance in a target weed species is available, use the less resistance-prone tank-mix partner at rate that will control the target weed(s) equally as well as the more resistance-prone partner. Consult your local extension service or crop advisor if you are unsure as to which active ingredient is currently less prone to resistance.
• Know your weeds and your field: Monitor fields, especially challenging areas with hard-to-control weeds or areas with high density weed populations.
• Begin with a clean field: Utilize tillage or an effective burndown herbicide program to control emerged weeds prior to planting.
• Use residual herbicides: Regardless of tillage system, overlapping soil-applied residual herbicides should be used in preemergence and early postemergence herbicide applications when possible.
• Follow all label guidelines: Always apply products according to their labelled timing, rates, spray volumes and other application requirements.
• Scout fields: Regularly scout fields, especially before and after an herbicide application to monitor weed populations, herbicide performance, and identify any weed escapes.
• Control weed escapes: Use an herbicide with alternative mode of action or a non-chemical method of control to control any weeds that may escape the initial herbicide application.
• Zero tolerance for weed seed production: DO NOT allow surviving weeds to produce seed, roots, or tubers. Control and remove all escapes through chemical or non-chemical methods of control. Preventing weed seed production will help decrease weed populations over time and mitigate major shifts in weed population dynamics.
• Clean equipment: Always clean equipment to prevent the spread of herbicide-resistant weeds and their seed between fields. 3Rotational interval for transplanting or direct-seeding of referenced crops following a preplant burndown application of LIFELINE Herbicide. 4Precipitation defined as either rainfall or overhead irrigation occurring after LIFELINE Herbicide application. LIFELINE may damage desirable plants which come in contact with herbicide remaining on the plastic prior to the specified rotational intervals. 5Regardless of precipitation occurring, DO NOT transplant or direct-seed referenced crops into or within 6 inches of holes in the plastic mulch that exist at the time of application of LIFELINE Herbicide. 6Precipitation is needed to wash LIFELINE off the plastic mulch and prevent damage to the crop. 7Soil texture groups defined as Coarse (sand, loamy sand, sandy loam), Medium (silt, silt loam, loam, sandy clay loam), Fine (sandy clay, silty clay, silty clay loam, clay loam and clay).

rnal

• Manage field borders: Manage weed populations along the borders of fields to prevent movement of weeds into the field.
• Employed an integrated approach: To the extent possible, utilize a diversified weed management program that includes multiple chemical and non-chemical practices to manage weeds, such as, multiple effective modes of action in a tank-mix, mechanical cultivation, biological management practices, crop rotation, cultural methods (higher crop seeding rates, precision fertilizer applications, and other strategies to increase crop competitiveness), etc. Contact your local extension specialist, certified crop advisors, and/or UPL NA, Inc. representative for additional resistance management, IPM recommendations, and to find out if suspected resistant weeds to Group 10 herbicides have been found in your region. More information on weed resistance management can be on the Herbicide Resistance Action Committee (HRAC) website at http://www.hracglobal.com. Report any incidence of non-performance of this product against a particular weed species to your retailer or UPL NA, Inc. representative.

WEEDS CONTROLLED

The following tables outline weeds controlled. Weed control may be reduced when applications are made to weeds under stress (i.e., drought, cool temperatures, dense populations, prior treatment of contact or systemic herbicides, etc.). Regrowth of weeds may occur as a result of weed size/growth stage at the time of application, use rate or environmental conditions. When any of these conditions exist, use a higher labelled rate of LIFELINE Herbicide to improve weed control. In weed populations of mixed species, apply at a rate needed for the species that requires the highest rate. Repeat applications of LIFELINE Herbicide may be necessary to control weeds that have not emerged at the time of application or regrow from underground reproductive structures. Volunteer glufosinate-resistant crop plants (i.e. canola, corn, cotton, soybean, and sugarbeets) from the previous season will not be controlled by applications of LIFELINE Herbicide. Rates in fluid ounces of formulated product per acre. See Application Instructions and Crop Use Directions for specific use directions. WEEDS CONTROLLED TABLE – ROW CROPS See Application Instructions and Crop Use Directions forspecific use directions.

Broadleaf Weeds Controlled (including glyphosate, triazine, PPO, ALS, HPPD and auxin-resistant biotypes)

Weed Species 22-29 fl oz/A (0.40-0.53 lbs ai/A) 29-43 fl oz/A (0.40-0.79 lbs ai/A) *

Weed Species 22-29 fl oz/A (0.40-0.53 lbs ai/A) 29-43 fl oz/A (0.40-0.79 lbs ai/A) * Amaranth, Palmer4 Not Advised C Morningglory, sharppod C C Anoda, spurred C C Morningglory, smallflower C C Beggarweed, Florida C C Morningglory, tall C C Black medic C C Mustard, wild C C Blueweed, Texas C C Nightshade, black C C Buckwheat, wild C C Nightshade, eastern black C C Buffalobur C C Nightshade, hairy C C Burcucumber C C Pennycress (stinkweed) C C Carpetweed C C Pigweed, prostrate C C Catchweed bedstraw (cleavers) C C Pigweed, redroot C C Chickweed, common C C Pigweed, smooth C C Cocklebur, common C C Pigweed, spiny C C Copperleaf, hophornbeam C C Pigweed, tumble C C Cotton, volunteer1 C C Puncturevine C C Croton, tropic C C Purslane, common C C Croton, woolly C C Pusley, Florida S C Inte

Internal

Broadleaf Weeds Controlled (including glyphosate, triazine, PPO, ALS, HPPD and auxin-resistant biotypes)

Weed Species 22-29 fl oz/A (0.40-0.53 lbs ai/A) 29-43 fl oz/A (0.40-0.79 lbs ai/A) *

Weed Species 22-29 fl oz/A (0.40-0.53 lbs ai/A) 29-43 fl oz/A (0.40-0.79 lbs ai/A) * Devil’s claw C C Ragweed, common C C Eclipta C C Ragweed, giant C C Fleabane, annual C C Senna coffee C C Galinsoga, hairy C C Sesbania, hemp C C Galinsoga, small flower C C Shepherd’s-purse C C Geranium, cutleaf C C Sicklepod (java bean) C C Groundcherry, cutleaf C C Sida, prickly C C Hempnettle C C Smartweed, Pennsylvania C C Horsenettle, Carolina2 C C Smellmelon C C Jimsonweed C C Sowthistle, annual C C Knotweed C C Soybeans, volunteer 1 C C Kochia C C Spurge, prostrate C C Ladysthumb C C Spurge, spotted C C Lambsquarters, common3 S C Starbur, bristly C C Mallow, common C C Sunflower, common C C Mallow, Venice C C Sunflower, prairie C C Marestail S C Sunflower, volunteer C C Marshelder, annual C C Thistle, Russian 2 S C Morningglory, entireleaf C C Velvetleaf 3 C C Morningglory, ivyleaf C C Waterhemp, common 4 Not Advised C Morningglory, pitted C C W aterhemp, tall4 Not Advised C C = Control S = Suppression

• Use the higher rate when treating larger/taller weeds.

1 Volunteer glufosinate-resistant crops from the previous season will not be controlled. 2 May require sequential applications for control. 3 For optimal control, make applications between dawn and 2 hours before sunset. 4 For optimal control, make applications when weeds are on the smaller size.

Internal

Grass Weeds Controlled (including glyphosate, triazine, PPO, ALS, HPPD and auxin-resistant biotypes)

Weed Species 22-29 fl oz/A (0.40-0.53 lbs ai/A) 29-43 fl oz/A (0.53-0.79 lbs ai/A)*

Weed Species 22-29 fl oz/A (0.40-0.53 lbs ai/A) 29-43 fl oz/A (0.53-0.79 lbs ai/A)* Barley, volunteer3 C C Millet, proso volunteer C C Barnyardgrass C C Oat, wild 2 C C Bluegrass, annual C C Panicum, fall C C Corn, volunteer1,4 C C Panicum, Texas C C Crabgrass, large2 C C Rice, red C C Crabgrass, smooth2 C C Rice, volunteer 4 C C Cupgrass, woolly C C Sandbur, field 2 S C Foxtail, bristly C C Shattercane C C Foxtail, giant C C Signalgrass, broadleaf C C Foxtail, green C C Sprangletop C C Foxtail, robust purple C C Sorghum, volunteer C C Foxtail, yellow2 C C Stinkgrass C C Goosegrass3 C C Wheat, volunteer 2 C C Johnsongrass, seedling C C Witchgrass C C Junglerice C C C = Control S = Suppression

• Use the higher rate when treating larger/taller weeds. 1 Volunteer glufosinate-resistant crops from the previous season will not be controlled. 2 For best control of yellow foxtail, field sandbur, crabgrass, wild oats, and volunteer wheat treat prior to tiller initiation. 3 A sequential application may be necessary for control. 4 A timely cultivation 7 to 10 days after an application and/or retreatment 10 to 21 days after the first application will aid in controlling dense clumps of volunteer corn and rice.

Internal

Biennial and Perennial Weed Control (including glyphosate, triazine, PPO, ALS, HPPD and auxin-resistant biotypes) For control of the biennial and perennial weeds listed below, use tank mixes or sequential applications of LIFELINE Herbicide 29-43 fl oz/A (0.53-0.79 lbs ai/A) * Alfalfa Clover, Alsike Nutsedge, purpleS Artichoke, Jerusalem Clover, red Nutsedge, yellowS Bermudagrass Dandelion Orchardgrass Bindweed, field Dock, smoothS Poinsettia, wild Bindweed, hedge Dogbane, hemp S Pokeweed Bluegrass, Kentucky Goldenrod, grayS QuackgrassS Blueweed, Texas Johnsongrass, rhizome Sowthistle, perennial Bromegrass, smooth Milkweed, commonS Thistle, bull Burdock Milkweed, honeyvineS Thistle, Canada Bursage, woolyleaf Muhly, wirestemS TimothyS Chickweed, Mouse-ear Nightshade, silverleaf Wormwood, biennial

• Use the higher rate when treating larger/taller weeds. S Suppression

Internal

WEEDS CONTROLLED TABLES – SUGAR BEETS Apply 29-36 fl oz (0.53 – 0.66 lbs ai) of LIFELINE Herbicide per acre for the control of weeds shown in the following tables. Use the higher rate when treating larger/taller weeds. For improved control of heavy populations or larger volunteer wheat, volunteer barley, yellow foxtail, and wild oats, LIFELINE Herbicide can be tank mixed with products containing quizalofop p-ethyl, sethoxydim, or clethodim.

See Application Instructions and Crop Use Directions for specific use directions.

Weed Species Perennial Weed Species Broadleaf Weed Species Barley, volunteer3 QuackgrassS Buckwheat, wild Barnyardgrass Sowthistle, perennial Buffalobur Corn, volunteer1 Thistle, Canada Carpetweed Crabgrass, large2 Chickweed, common Crabgrass, smooth2 Cocklebur, common Cupgrass, woolly Kochia Foxtail, giant Ladysthumb Foxtail, green Lambsquarter, common3,4 Foxtail, yellow2 Mallow, Venice Millet, volunteer proso Marshelder Millet, wild proso Mustard, wild Oat, wild2 Nightshade, eastern black Panicum, fall Pigweed, prostrate Panicum, Texas Pigweed, redroot Sandbur, field2 Pigweed, smooth Wheat, volunteer2 Pigweed, spiny Purslane, common Ragweed, common Ragweed, giant Shepherdspurse Smartweed, Pennsylvania Sowthistle, annual Sunflower, common Thistle, Russian3 Velvetleaf4 1 Volunteer glufosinate-resistant crops from the previous season will not be controlled. A timely cultivation 7 to 10 days after an application and/or retreatment 10-21 days after the first application will aid in controlling dense clumps of volunteer corn. 2 For best control of yellow foxtail, field sandbur, crabgrass, wild oats, and volunteer wheat treat prior to tiller initiation. 3 A sequential application may be necessary for control. 4For optimal control, make applications between dawn and 2 hours before sunset. SSuppression

Internal

WEEDS CONTROLLED TABLE – TREE, VINE, AND BERRY CROPS Apply LIFELINE Herbicide at an appropriate rate from the following table based on size of target weed species to control labelled weeds in tree, vine and berry use sites. See Application Instructions and Crop Use Directions for specific use directions.

Weed Height in Inches Use Rate/A Weeds < 3” in height 48 fl oz/A (0.88 lbs ai/A) Weeds < 6” in height 56 fl oz/A (1.02 lbs ai/A) Weeds > 6” in height and/or grasses that have tillered 56 fl oz – 82 fl oz/A (1.02 – 1.50 lbs ai/A)

Broadleaf Weed Control Alkali sida Fleabane, annual Morningglory, ivyleaf Smartweed, Pennsylvania Ammannia, purple Goosefoot Morningglory, pitted Sowthistle, annual Arrowhead, California Gromwell, field Mullein, turkey Spurge, prostrate Buckwheat, wild Gr oundcherry, cutleaf Mustard, wild Starthistle, yellow Buffalobur Groundsel, common Nettle Sunflower, common Burclover, California Henbit Nightshade, black Sunflower, prairie Carpetweed Jimsonweed Nightshade, eastern black Sunflower, volunteer Chickweed, common Knotweed Nightshade, hairy Swinecress Chinese thornapple Kochia Pennycress Thistle, Russian Cockebur, common Lambsquarters, common1 Pigweed, redroot Turnip, wild Copperleaf, Virginia Lettuce, miner’s Pineapple weed Velvetleaf1 Cudweed Lettuce, prickly Puncturevine Vervain Cutleaf eveningprimrose London rocket Purslane, common Vetch Dodder Mallow, common Radish, wild Virginia copperleaf Eclipta Malva (little mallow) Ragweed, common Willowherb, panicle Fiddleneck Marestail Ragweed, giant Filaree Mayweed Redmaids Filaree, redstem Morningglory, entireleaf Shepherdspurse 1 For optimal control, make applications between dawn and 2 hours before sunset. 2 For optimal control, make applications when weeds are on the smaller size.

Internal

Grass Weed Control Barnyardgrass Crabgrass, smooth 2 Junglerice Shattercane Bluegrass, annual Cupgrass, woolly Oat, wild 2 Sprangletop Brome, ripgut Foxtail, giant Panicum, fall Stinkgrass Bromegrass, downy Foxtail, green Panicum, Texas Wheat, volunteer 2 Canarygrass Foxtail, yellow 2 Rush, toadS Windgrass Chess, soft Goosegrass Ryegrass, annual 1 Witchgrass Crabgrass, large2 Johnsongrass, seedling Sandbur, field2

1 Apply to annual ryegrass prior to 3 inches in height. 2 For best control of yellow foxtail, field sandbur, crabgrass, wild oats, and volunteer wheat treat prior to tiller initiation. S Suppression

Biennial and Perennial Weed Control Aster, white heath Dallisgrass Mustard, tansy Rubus spp. Bindweed, field Dandelion Nutsedge, purple Spurge, leafy Bindweed, hedge Dock, curly Nutsedge, yellow Thisltle, bull Bluegrass, Kentucky Dogbank (hemp) Onion, wild Thistle, musk Bromegrass, smooth Fescue Orchardgrass Torpedograss Bulrushs Goldenrod, gray Paragrass Vaseygrass Burdock Guineagrass Plantain Woodsorrel Canada thistle Horsetail Poison ivy/oak Yarrow, common Clover, Alsike Lovegrass Quackgrass Clover, red Mugwort Rocket, yellow Clover, white Mullein, common Rose, wild

S Suppression

WEEDS CONTROLLED TABLE – CUCURBITS, FRUITING VEGETABLES, and HOPS For Cucurbits and Fruiting Vegetables, apply 29 - 62 fl oz (0.53 – 1.13 lbs ai) of LIFELINE Herbicide per acre based on application timing.

For Hops, apply 32 to 55 fl oz (0.59 – 1.01 lbs ai) of LIFELINE Herbicide for weeds < 3 inches in height and hop sucker control. Apply 55 fl oz (1.01 lbs ai) of LIFELINE Herbicide for weeds > 6 inches in height and grasses that have not tillered.

See Application Instructions and Crop Use Directions for specific use directions.

Internal

Broadleaf Weed Control Alkali sida Fleabane, annual Morningglory, pitted Spurge, prostrate Amaranth, Palmer2 Goosefoot Mullein, turkey Starthistle, yellow Ammannia, purple Gromwell, field Mustard, wild Sunflower, common Arrowhead, California Groundcherry, cutleaf Nettle Sunflower, prairie Buckwheat, wild Gr oundsel, common Nightshade, black Sunflower, volunteer Buffalobur Henbit Nightshade, eastern black Swinecress Burclover, California Jimsonweed Nightshade, hairy Thistle, Russian Carpetweed Knotweed Pennycress Turnip, wild Chickweed, common Kochia Pigweed, redroot Velvetleaf 1 Chinese thornapple Lambsquarters, common 1 Pineapple weed Vervain Cockebur, common Lettuce, miner’s Puncturevine Vetch Copperleaf, Virginia Lettuce, prickly Purslane, common Virginia copperleaf Cudweed London rocket Radish, wild Waterhemp, tall 2 Cutleaf evening primrose Mallow, common Ragweed, common Waterhemp, common 2 Dodder Malva (little mallow) Ragweed, giant Waterhemp, common 2 Eclipta Marestail Redmaids Willowherb, panicle Fiddleneck Mayweed Shepherds purse Filaree Morningglory, entireleaf Smartweed, Pennsylvania Filaree, redstem Morningglory, ivyleaf Sowthistle, annual 1 For optimal control, make applications between dawn and 2 hours before sunset. 2 For optimal control, make applications when weeds are on the smaller size.

Grass Weed Control Barnyardgrass Crabgrass, smooth 2 Junglerice Shattercane Bluegrass, annual Cupgrass, woolly Oat, wild 2 Sprangletop Brome, ripgut Foxtail, giant Panicum, fall Stinkgrass Bromegrass, downy Foxtail, green Panicum, Texas Wheat, volunteer 2 Canarygrass Foxtail, yellow 2 Rush, toadS Windgrass Chess, soft Goosegrass Ryegrass, annual 1 Witchgrass Crabgrass, large2 Johnsongrass, seedling Sandbur, field 2 1 Apply to annual ryegrass prior to 3 inches in height 2 For best control of yellow foxtail, field sandbur, crabgrass, wild oats, and volunteer wheat treat prior to tiller initiation. S Suppression

Biennial and Perennial Weed Control Aster, white heath Dallisgrass Mustard, tansy Rubus spp. Bindweed, field Dandelion Nutsedge, purple Spurge, leafy Bindweed, hedge Dock, curly Nutsedge, yellow Thistle, bull Bluegrass, Kentucky Dogbank (hemp) Onion, wild Thistle, musk Bromegrass, smooth Fescue Orchardgrass Torpedograss BulrushS Goldenrod, gray Paragrass Vaseygrass Burdock Guineagrass Plantain Woodsorrel Canada thistle Horsetail Poison ivy/oak Yarrow, common Clover, Alsike Lovegrass Quackgrass Clover, red Mugwort Rocket, yellow Clover, white Mullein, common Rose, wild S Suppression

Internal

WEEDS CONTROLLED TABLES – GRASS GROWN FOR SEED PRODUCTION Apply 10- 20 fl oz (0.18 – 0.37 lbs ai) of LIFELINE Herbicide per acre as a fall or spring broadcast application for the control of weeds shown in the following table based on the level of crop establishment. See Application Instructions and Crop Use Directions for specific use directions.

Weed Control – Fall or Spring Broadcast Applications Annual bluegrass (Poa annua) Bromus species1 Manna grass Roughstalk bluegrass (Poa trivialis) 1 Suppression Apply 55 fl oz (1.01 lbs ai) of LIFELINE Herbicide per acre as a spring hooded or shielded directed spray application for control of weeds shown in the following tables when weeds are less than 8 inches tall. Apply 82 fl oz (1.50 lbs ai) of LIFELINE Herbicide per acre as a spring hooded or shielded directed spray application for control of weeds shown in the following tables when weeds are greater than 8 inches tall. See Application Instructions and Crop Use Directions for specific use directions.

Broadleaf Weed Control Alkali sida Fleabane, annual Morningglory, pitted Spurge, prostrate Amaranth, Palmer2 Goosefoot Mullein, turkey Starthistle, yellow Ammannia, purple Gromwell, field Mustard, wild Sunflower, common Arrowhead, California Groundcherry, cutleaf Nettle Sunflower, prairie Buckwheat, wild Gr oundsel, common Nightshade, black Sunflower, volunteer Buffalobur Henbit Nightshade, eastern black Swinecress Burclover, California Jimsonweed Nightshade, hairy Thistle, Russian Carpetweed Knotweed Pennycress Turnip, wild Chickweed, common Kochia Pigweed, redroot Velvetleaf1 Chinese thornapple Lambsquarters, common1 Pineapple weed Vervain Cockebur, common Lettuce, miner’s Puncturevine Vetch Copperleaf, Virginia Lettuce, prickly Purslane, common Virginia copperleaf Cudweed London rocket Radish, wild W illowherb, panicle Cutleaf evening primrose Mallow, common Ragweed, common Dodder Malva (little mallow) Ragweed, giant Eclipta Marestail Redmaids Fiddleneck Mayweed Shepherds purse Filaree Morningglory, entireleaf Smartweed, Pennsylvania Filaree, redstem Morningglory, ivyleaf Sowthistle, annual 1 For optimal control, make applications between dawn and 2 hours before sunset. 2 For optimal control, make applications when weeds are on the smaller size.

Internal

Grass Weed Control Barnyardgrass Crabgrass, smooth2 Junglerice Shattercane Bluegrass, annual Cupgrass, woolly Oat, wild2 Sprangletop Brome, ripgut Foxtail, giant Panicum, fall Stinkgrass Bromegrass, downy Foxtail, green Panicum, Texas Wheat, volunteer2 Canarygrass Foxtail, yellow2 Rush, toad2 Windgrass Chess, soft Goosegrass Ryegrass, annual1 Witchgrass Crabgrass, large2 Johnsongrass, seedling Sandbur, field2 1 Apply to annual ryegrass prior to 3 inches in height 2 For best control of yellow foxtail, field sandbur, crabgrass, wild oats, and volunteer wheat treat prior to tiller initiation. S Suppression

Biennial and Perennial Weed Control Aster, white heath Dallisgrass Mustard, tansy Rubus spp. Bindweed, field Dandelion Nutsedge, purple Spurge, leafy Bindweed, hedge Dock, curly Nutsedge, yellow Thistle, bull Bluegrass, Kentucky Dogbank (hemp) Onion, wild Thistle, musk Bromegrass, smooth Fescue Orchardgrass Torpedograss BulrushS Goldenrod, gray Paragrass Vaseygrass Burdock Guineagrass Plantain Woodsorrel Canada thistle Horsetail Poison ivy/oak Yarrow, common Clover, Alsike Lovegrass Quackgrass Clover, red Mugwort Rocket, yellow Clover, white Mullein, common Rose, wild SSupression

APPLICATION AND MIXING PROCEDURES Uniform, thorough spray coverage is important to achieve consistent weed control. The use of surfactants andthe addition of AMS may improve weed control. Refer to the Weeds Controlled tables or Applications Instructions and Crop Use Directions for application rates. Ground application: Apply early when weeds are small. Apply in a minimum of 15 gallons of water per acre. Increase to a maximum of 20 gallons of water per acre if dense weed canopy exists or as required by climatic conditions. Aerial Application: Apply early when weeds are small. Thorough coverage is necessary for best weed control. For optimal weed control, apply LIFELINE Herbicide in a minimum of 10 gallons per acre. See the Mandatory Spray Drift Mitigation section for additional information on proper application of LIFELINE Herbicide. DO NOT use flood jet nozzles, controlled droplet application equipment, or air-assisted spray equipment. Adjuvant Instructions: The addition of ammonium sulfate (AMS) at 1.5 lbs to 3.0 lbs/acre may improve weed control. Rates are dependent on tank mix partners, environmental conditions, temperatures and potential for leaf burn in applicable use sites. AMS has shown to improve weed control of difficult-to-control weeds, under less than ideal environmental conditions (low relative humidity) or hard water. Additional surfactants or crop oils may be used but may increase the risk of crop response. Please refer to the surfactant label for more detailed directions. Please note that the addition of MSO may cause antagonism and reduce overall performance in certain situations. A silicone based anti-foam agent be added if needed.

Internal

COMPATIBILITY TESTING If LIFELINE Herbicide will be mixed with other pesticide products, test the compatibility of the intended tank mixture before mixing the products in the spray tank. The following procedure assumes a spray volume of 25 gallons per acre. For other spray volumes, adjust the amount of water used accordingly. Check compatibility using this process:

1. In a clear 1-quart jar, place 1.0 pint of water from the source that will be used to prepare the spray solution.
2. For each pound of a dry tank mix partner to be applied per acre, add 1.5 teaspoons to the jar.
3. For each 16 fl oz of a liquid tank mix partner to be applied per acre, add 0.5 teaspoon to the jar.
4. For each 16 fl oz of LIFELINE Herbicide to be applied per acre, add 0.5 teaspoon to the jar.
5. After adding all the ingredients, place a lid on the jar and tighten, then invert 10 times to mix.
6. Allow the mixture to stand for 15 minutes, then evaluate the solution for uniformity and stability. Look for separation, large flakes, precipitates, gels, heavy oily film on the jar, or other signs of incompatibility. If the tank mix partners are not compatible, DO NOT use the mixture in a spray tank.
7. Once compatibility testing is complete, dispose of any pesticide wastes in accordance with the Storage and Disposal section of this label.

MIXING INSTRUCTIONS Tank Mix Instructions: LIFELINE Herbicide may be applied in tank mix combinations with labeled rates of other products. Use the tank mix partner in accordance with label limitations and restrictions. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture. LIFELINE Herbicide must be applied with properly calibrated and clean equipment. LIFELINE Herbicide is formulated to mix readily in water. Prior to adding LIFELINE Herbicide to the spray tank, ensure that the spray tank is thoroughly clean, particularly if an herbicide with the potential to injure crops was previously used (see Cleaning Instructions). Mix LIFELINE Herbicide with water to make a finished spray solution as follows:

1. Fill the spray tank half full with water.
2. Begin agitation.
3. If mixing with a flowable/wettable powder tank mix partner, prepare a slurry of the proper amount of the product in a small amount of water. Add the slurry to the spray tank.
4. Add the appropriate amount of ammonium sulfate (AMS) to the spray tank.
5. If mixing with a liquid tank mix partner, add the liquid mix partner next.
6. Complete filling the spray tank with water.
7. Add the proper amount of LIFELINE Herbicide and continue agitation.
8. If foaming occurs, use a silicone-based antifoam agent. Ensure that all spray system lines including pipes, booms, etc. have the correct concentration of spray solution by flushing out the spray system lines before starting the crop application. If tank mix partners are added, maintain good agitation at all times until contents of the tank are sprayed. If the spray mixture is allowed to settle, thorough agitation is required to re-suspend the mixture before spraying is resumed. Keep bypass line on or near bottom of tank to minimize foaming. Screen size in nozzles or line strainers must be 50 mesh or larger. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.

CLEANING INSTRUCTIONS Before using LIFELINE Herbicide, thoroughly clean bulk storage tank, refillable tank, nurse tanks, spray tank, lines, and filter, particularly if an herbicide with the potential to injure crops was previously used. Ensure that equipment is thoroughly rinsed using a commercial tank cleaner.

Internal

After using LIFELINE Herbicide, triple rinse the spray equipment and clean with a commercial tank cleaner before using for crops not labeled as glufosinate-resistant. Make sure any rinsate or foam is thoroughly removed from spray tank and boom. Rinsate may be disposed following the pesticide disposal directions on this label.

MANDATORY SPRAY DRIFT MITIGATION Ground boom applications:

• Spray at the appropriate boom height based on nozzle selection and nozzle spacing, but DO NOT exceed a boom height of 24 inches above target pest or crop canopy. Set boom to lowest effective height over the target pest or crop canopy based on equipment manufacturer’s directions. Automated boom height controllers are advised with large booms to better maintain optimumnozzle to canopy height. Excessive boom height will increase the potential for spray drift.
• For non-crop vegetation management ground applications, apply with the nozzle height no more than 4 feet above the ground or target vegetation, unless necessitated by the application equipment. Examples would include roadside, railroad, utility rights of way, forestry and other industrial vegetation management applications where safety or natural barriers obstruct application.
• Select nozzle and pressure that deliver medium to coarse spray droplets as indicated in nozzle manufacturer’s catalogues and in accordance with ASABE Standard 572.1.
• DO NOT apply when wind speeds exceed 10 miles per hour at the application site.
• DO NOT apply during temperature inversions. Aerial applications:
• When applying aerially to crops, DO NOT release spray at a height greater than 10 ft. above thecrop canopy, unless a greater application height is necessary for pilot safety.
• Select nozzle and pressure that deliver medium to coarse spray droplets as indicated in nozzle manufacturer’s catalogues and in accordance with ASABE Standard 572.1.
• When applying to crops via aerial application equipment, the spray boom must be mounted on the aircraft so as to minimize drift caused by wing tip or rotor blade vortices. The boom length must notexceed 75% of the wingspan or 90% of the rotor blade diameter.
• When applying to crops via aerial application equipment, applicators must use ½ swathdisplacement upwind at the downwind edge of the field.
• Nozzles must be oriented so the spray is directed toward the back of the aircraft.
• DO NOT apply when wind speeds exceed 10 miles per hour at the application site.
• DO NOT apply during temperature inversions.

SPRAY DRIFT ADVISORIES

POLLINATOR ADVISORY STATEMENT: This product contains an herbicide. Follow all label directions and precautions to minimize potential off-target exposure in order to prevent effects to non-target plants adjacent to the treated site which may serve as habitat or forage for pollinators. The interaction of many equipment and weather-related factors determines the potential for spray drift. The applicator is responsible for considering all these factors when making application decisions. Importance of Droplet Size The most effective way to reduce drift potential is to apply large droplets. The best drift management strategy is to apply the largest droplets that provide sufficient coverage and control. The presence of sensitive species nearby, the environmental conditions, and pest pressure may affect how an applicator balances drift control and coverage. APPLYING LARGER DROPLETS REDUCES DRIFT POTENTIAL, BUT WILL NOT PREVENT DRIFT IF APPLICATIONS ARE MADE IMPROPERLY OR UNDER UNFAVORABLE ENVIRONMENTAL CONDITIONS! See Wind, Temperature and Humidity, and Temperature Inversions sections of this label. Controlling Droplet Size – Ground Boom Volume - Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with higher rated flows produce larger droplets. Pressure - Use the lower spray pressures advised for the nozzle. Higher pressure reduces droplet size and does not improve canopy penetration. WHEN HIGHER FLOW RATES ARE NEEDED, USE A HIGHER-CAPACITY NOZZLE INSTEAD OF INCREASING PRESSURE.

Internal

Nozzle Type - Use a nozzle type that is designed for the intended application. With most nozzle types, narrower spray angles produce larger droplets. Consider using low-drift nozzles. Controlling Droplet Size – Aircraft Number of Nozzles - Use the minimum number of nozzles with the highest flow rate that provide uniform coverage. Nozzle Orientation - Orienting nozzles so that the spray is emitted backwards, parallel to the airstream will produce larger droplets than other orientations. AVOIDING SPRAY DRIFT IS THE RESPONSIBILITY OF THE APPLICATOR. Nozzle Type - Solid stream nozzles (including disc and core with swirl plate removed) oriented straight back produce larger droplets than other nozzle types. Boom Length - Longer booms increase drift potential. Therefore a shorter boom length is advised.Application Height - Application more than 10 ft. above the canopy increases the potential for spray drift.

BOOM HEIGHT Setting the boom at the lowest referenced height (if specified) which provides uniform coverage reduces the exposure of droplets to evaporation and wind. For ground equipment, the boom must remain level with the crop and have minimal bounce. DRIFT REDUCTION TECHNOLOGY (DRT) The EPA Drift Reduction Technology (DRT) Program was developed to encourage the manufacture, marketing, and use of spray technologies scientifically verified to significantly reduce pesticide drift. The use of DRTs may result in significantly less pesticide from spray applications drifting and being deposited in areas not targeted by those applications, compared to spray technologies that do not meet the minimum DRT standard. EPA-verified drift reduction technologies (DRTs) and their ratings will be added to the following webpage as they become available: https://www.epa.gov/reducing-pesticide-drift/epa-verified-and-rated-drift-reduction-technologies

WIND Drift potential increases at wind speeds of less than 3 mph (due to inversion potential) or more than 10 mph. However, many factors, including droplet size and equipment type determine drift potential at any given wind speed. AVOID APPLICATIONS DURING GUSTY OR WINDLESS CONDITIONS. Note: Local terrain can influence wind patterns. Every applicator needs to be familiar with local windpatterns and how they affect spray drift. TEMPERATURE AND HUMIDITY When making applications in hot and dry conditions, set up equipment to produce larger droplets to reduce effects of evaporation.

TEMPERATURE INVERSIONS Drift potential is high during a temperature inversion. Temperature inversions restrict vertical air mixing, which causes small, suspended droplets to remain close to the ground and move laterally in a concentrated cloud. Temperature inversions are characterized by increasing temperature with altitude and are common on nights with limited cloud cover and light to no wind. They begin to form as the sun sets and often continue into the morning. Their presence can be indicated by ground fog; however, if fog is not present, inversions can also be identified by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing. SHIELDED SPRAYERS Shielding the boom or individual nozzles can reduce the effects of wind. However, it is the responsibility of the applicator to verify that the shields are preventing drift and not interfering with uniform deposition of the product.

APPLICATION INSTRUCTIONS AND CROP USE DIRECTIONS The following tables indicate use patterns, rates, minimum spray volumes, preharvest intervals and other precautions, restrictions and comments specific to each crop. Read and follow directions carefully. LIFELINE Herbicide is a foliar active herbicide with no soil residual activity. For best results, apply to emerged, young, actively growing weeds, targeting weeds less than 3” in height. Warm temperatures, high humidity and bright sunlight improves the performance of LIFELINE Herbicide. Necrosis of leaves and young shoots occurs within 2 to 4 days after application under ideal growing conditions.

Internal

Weeds that emerge after application will not be controlled. Weed control may be reduced if application is made when heavy dew, fog, mist or rain are present or when weeds are under stress due to drought, cool temperatures, or extended periods of cloudiness. When applying for control of lambsquarters and velvetleaf, make applications between dawn and 2 hours before sunset to avoid the possibility of reduced control. The addition of ammonium sulfate (AMS) at 1.5 lbs to 3.0 lbs/acre may improve weed control. Rates are dependent on tankmix partners, environmental conditions, temperatures and potential for leaf burn in applicable use sites. Use a minimum spray volume of 15 gallons of water per acre. If dense canopy, large weeds or unfavorable growing conditions are present, increase water volume to 20 gallons of water per acre. For optimal yield, early season weed removal is important. To maximize weed control, DO NOT cultivate from 5 days before an application to 7 days after an application. LIFELINE Herbicide is rainfast 4 hours after application; therefore rainfall within 4 hours may necessitate retreatment. Consult your local Cooperative Extension Service for guidelines on optimum application timing for LIFELINE Herbicide in your region.

APPLICATION INSTRUCTIONS AND CROP USE DIRECTIONS

Crop Use Pattern Rate/Acre Directions Restrictions COTTON

Burndown (Prior to Planting or Prior to Crop Emergence)

1st application

29.0 – 43.0 fl oz/A (0.53 – 0.79 lbs ai/A) Sequential applications

22.0 – 43.0 fl oz/A (0.40 – 0.79 lbs ai/A) Apply to emerged, young, actively growing weeds. Uniform, thorough spray coverage is necessary to achieve consistent weed control. When applying In-Season to non glufosinate- resistant cotton, a hooded sprayer must be used. Refer to Application Methods to non glufosinate-resistant cotton. Post Emergent Application: Apply from crop emergence to early bloom stage Severe injury or death may result if LIFELINE Herbicide contacts the foliage or stems of cotton NOT labeled as glufosinate-resistant.

May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A. DO NOT apply to cotton in Florida, South of Tampa (Florida Route 60), or in Hawaii, except for test plots or breeding nurseries. DO NOT apply within 70 days of harvest. DO NOT apply through any type of irrigation system. DO NOT apply more than 43 fl oz/A (0.79 lb ai/A) in any single application. DO NOT apply more than 1 burndown application per year to cotton. If a burndown application is made, DO NOT apply more than 2 in-season applications per year. If a burndown application is NOT made, DO NOT apply more than 3 in-season applications per year when using less than the maximum labeled rate. DO NOT apply more than 3 applications per year through any combination of burndown and in-season applications when using less than the maximum labeled rate. DO NOT apply more than 87 fl oz/A (1.59 lb ai/A) per year. In-Season Glufosinate- resistant cotton only. In-Season Directed Application with Hooded Sprayer to non- glufosinate- resistant cotton

Internal

DO NOT apply sequential applications closer than 5 days apart. DO NOT apply within 70 days of cotton harvest. DO NOT apply in-season to non-glufosinate-resistant cotton except with a hooded sprayer. DO NOT use nitrogen solutions as a spray carrier. DO NOT tank-mix this product with both an EC formulation herbicide and acephate insecticide. DO NOT apply if cotton shows injury from environmental stress or prior herbicide applications.

Internal

Crop Use Pattern Rate/Acre Directions Restrictions CORN Field, Silage,

Burndown (Prior to Planting or Prior to Crop Emergence) 29.0 – 43.0 fl oz/A (0.53 – 0.79 lbs ai/A) Apply to emerged, young, actively growing weeds. Uniform, thorough spray coverage is necessary to achieve consistent weed control. DO NOT apply more than 43fl oz (0.79 lbs ai)/A in any single application as a burndown treatment. DO NOT make more than one burndown application per year. In-Season to Glufosinate- resistant Corn Only (Post Emergent to the Crop) 22.0 fl oz/A – 43 fl oz/A (0.40 – 0.79 lbs ai/A) A second In- Season application may be needed to control weeds that have not yet emerged attime of application. Apply to emerged, young, actively growing weeds. Uniform, thorough spray coverage is necessary to achieve consistent weed control. Post Emergent Application: Apply from emergence up to V6 stage of growth For corn 24” to 36” tall, only apply using ground application and nozzles and avoid spraying intothe whorl or leaf axils ofthe corn stalks. May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A. DO NOT make more than 2 In- Season applications per acre per year, DO NOT apply closer than 7 days apart. DO NOT apply more than 43 fl oz (0.79 lbs ai)/A in any single application. DO NOT apply more than 3 applications per year through any combination of burndown and in-season applications when using less than the maximum labeled rate. DO NOT apply with 60 days of harvesting corn forage, and within 70 days of harvesting corn grain or corn fodder. DO NOT apply through any type of irrigation system. DO NOT apply more than 87.0 fl oz (1.59 lbs ai)/A through any combination of use patterns per year. DO NOT use nitrogen solutions as spray carriers. DO NOT apply if corn shows injury from environmental stress or prior herbicide applications.

Internal

Crop Use Pattern Rate/Acre Directions Restrictions CORN Sweet Burndown (Prior to Planting or Prior to Crop Emergence) 29.0 – 43.0 fl oz/A (0.53 – 0.79 lbs ai/A) Apply to emerged, young, actively growing weeds. Uniform, thorough spray coverage is necessary to achieve consistent weed control. Post Emergent Application: Apply from emergence up to V6 stage of growth. May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A. If used as a burndown application, no In-Season applications may be applied. DO NOT make more than 2 In-Season applications per acre per year. DO NOT make more than 1 burndown application per year. DO NOT apply closer than 7 days apart. DO NOT apply more than 22 fl oz (0.40 lbs ai)/A in any single application. DO NOT apply within 50 days of harvesting sweet corn ears and within 55 days of harvesting stover. DO NOT apply through any type of irrigation system. DO NOT apply more than 44.0 fl oz (0.80 lbs ai)/A through any combination of use patterns per year. DO NOT use nitrogen solutions as spray carriers.

DO NOT apply if corn shows injury from environmental stress or prior herbicide applications. In-Season to Glufosinate- resistant Sweet Corn Only (Post Emergent to the Crop)

22.0 fl oz/A (0.40 lbs ai/A) A second In- Season application may be needed to control weeds that have not yet emerged at time of application.

• For best results use only fine feed grade or spray grade AMS at 3 lbs/A (17 lbs/100 gallons). When temperatures exceed 85º F, the rate of AMS can be reduced to 1.5 lbs per acre (8.5 lbs/100 gallons) to reduce potential leaf burn. Use of additional surfactants or crops oils may increase risk of crop response.
• Refer to Weeds Controlled – Row Crop table for proper application rates for specific weeds.

Internal

Crop Use Pattern Rate/Acre Directions Restrictions CANOLA, GOLD OF PLEASURE (CAMELINA) Burndown (Prior to Planting or Prior to Crop Emergence) 29.0 – 43.0 fl oz/A (0.53 – 0.79 lbs ai/A) Apply to emerged, young, actively growing weeds. Uniform, thorough spray coverage is necessary to achieve consistent weed control. Post Emergent application: apply from cotyledon stage up to early bolting stage. Slight discoloration of the canola may be visible after application. This effect is temporary and will not influence crop growth, maturity, or yield. May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A.

Additional surfactants or crop oils may increase risk of crop response. DO NOT apply more than once as a burndown application. DO NOT make more than 2 In-Season applications per year DO NOT apply closer than 7 days apart. DO NOT apply more than 43 fl ozs/A (0.79 lb ai/A) in a single application for burndown use. DO NOT apply more than 29 fl ozs/A (0.53 lb ai/A) in a single in-season application. DO NOT apply In-Season in states of AL, DE, GA, KY, MD, NJ, NC, SC, TN, VA, WV. DO NOT apply more than 3 applications per year through any combination of burndown and in-season applications when using less than the maximum labeled rate. DO NOT apply within 65 days of harvest. DO NOT apply if Glufosinate-resistant canola and gold-of-pleasure shows injury from prior herbicide applications or environmental stress (drought, excessive rainfall, etc.). DO NOT graze the treated crop or cut for hay. DO NOT apply through any type of irrigation system. DO NOT apply more than 87.0 fl oz (1.59 lbs ai)/A through any combination of use patterns per year.

DO NOT apply more than 58 fl oz/A (1.06 lbs ai/A) per year if no burndown application was used.

In-Season to Glufosinate- resistant Canola or Gold of Pleasure (Camelina) (Post Emergent to the Crop) 29.0 fl oz/A (0.53 lbs ai/A) A second In- Season application may be needed to control weeds that have not yet emerged at time of application.

• Refer to Weeds Controlled – Row Crop table for proper application rate for specific weeds.

Internal

Crop Use Pattern Rate/Acre Directions Restrictions SOYBEAN Burndown (Prior to Planting or Prior to Crop Emergence) 29.0 -43.0 fl oz/A (0.53 – 0.79 lbs ai/A) Apply to emerged, young, actively growing weeds. Uniform, thorough spray coverage is necessary to achieve consistent weed control. A silicone-based antifoam agent may be added if needed. Post Emergent application: apply from crop emergence up to bloom or R1 growth stage. May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A. DO NOT apply more than 43 fl oz (0.79 lbs ai)/A in any single application. DO NOT make more than two in-season applications per year. DO NOT make more than one Burndown application per year. DO NOT make more than three applications per year through any combination of burndown and in-season applications when using less than the maximum labeled rate. DO NOT apply closer than 5 days apart. DO NOT apply within 70 days of harvesting soybean seed. DO NOT graze the treated crop or cut for hay. DO NOT apply through any type of irrigation system. DO NOT apply more than 87.0 fl oz (1.59 lbs ai) /A through any combination of use patterns per year. DO NOT use nitrogen solutions as spray carriers. DO NOT apply if soybeans show injury from environmental stress or prior herbicide applications. In-Season to Glufosinate- resistant Soybeans Only (Post Emergent to the Crop) 1st Application

29.0 -43.0 fl oz/A (0.53 – 0.79 lbs ai/A) Sequential Application 22.0 – 43.0 fl oz/A (0.40 – 0.79 lbs ai/A)

• Refer to Weeds Controlled – Row Crop table for proper application rate for specific weeds.

Internal

Crop Use Pattern Rate/Acre Directions Restrictions SUGAR BEETS Burndown (Prior to Planting or Prior to Crop Emergence) 29.0 – 36.0 fl oz/A (0.53 – 0.66 lbs ai/A) Apply to emerged, young, actively growing weeds. For best control begin application when weeds are up to 1 inch in height or diameter. Repeat applications when newly germinated weeds again reach 1 inch in height or diameter. Uniform, thorough spray coverage is necessary to achieve consistent weed control. Post Emergent application: apply from cotyledon stage up to 10 leaf stage of sugar beet. May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A. Additional surfactants or crop oils may increase risk of crop response. If used as burndown, only one In- Season application may be applied. DO NOT make more than one burndown application per year. DO NOT make more than two applications per year including burndown. DO NOT make more than 2 in-season applications per year if not burndown application was made. DO NOT apply closer than 10 days apart. DO NOT apply more than 36 fl ozs/A (0.66 lb ai/A) in a single application for burndown use. DO NOT apply more than 29 fl ozs/A (0.53 lb ai/A) in a single application for in- season use. DO NOT make more than 1 application for burndown use for all crops. In-Season to Glufosinate- resistant Sugar Beets Only (Post Emergent to the Crop) 29.0 fl oz/A (0.53 lbs ai/A) A second In- Season application may be needed to control weeds that have not yet emerged at the time of application DO NOT graze the treated crop or cut for hay. DO NOT apply product through any type of irrigation system. DO NOT apply more than 60.0 fl oz (1.10 lbs ai)/A through any combination of use patterns per year. DO NOT add surfactants. Anti foams or drift control agents may be added if needed. DO NOT apply if sugar beets show injury from environmental stress or prior herbicide applications.

• Refer to Weeds Controlled – Sugarbeets table for proper application rate for specific weeds.

Internal

Crop Use Pattern Rate/Acre Directions Restrictions HOPS Burndown (14 days Prior to Planting)

Broadcast In-Season Apply ONLY as a Postemergence- Directed Broadcast application. See Application Methods section for additional information on Postemergence- Directed Broadcast applications Weeds < 3” in height 32 fl oz/A (0.59 lbs ai/A) Weeds < 6” in Height and grasses that have tillered 55 fl oz/A (1.00 lbs ai/A) Only trunks with callused, mature brown bark may be sprayed unless protected from spray contact by nonporous wraps, grow tubes, or waxed containers. Avoid direct spray, drift or mist to green bark, stems, foliage, or fruit as injury may occur. May be applied with a hooded sprayer to prevent spray drift to susceptible vegetation.

May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A. DO NOT apply to hops that are less than 6 feet tall, and then only apply to the lower 18 inches of hops plants that are over 6 feet tall. DO NOT apply to hop suckers prior to training hops on the string/wire and before hop height is 6 feet tall on string/wire.

DO NOT use this product to burn back existing vines to obtain even emergence of subsequent vines.

DO NOT apply more than 55 fl ozs/A (1.01 lb ai/A of glufosinate) in a single application.

DO NOT apply more than a maximum cumulative amount of 165 fl ozs/A (3.00 lbs ai/A of glufosinate) from sequential applications in hops per year.

DO NOT apply more than 3 applications per year. DO NOT apply closer than 25 days apart. DO NOT apply this product aerially to hops. DO NOT apply within 10 days of harvest.

Internal

Crop Use Pattern Rate/Acre Directions Restrictions POME FRUIT (Crop Group 11-10) Apples, Crabapple, Loquat, Mayhaw, Quince, Pear, Oriental Pear Azarole, Medlar, Tejocote, and cultivars, varieties and/or hybrids of these Postemergence -Directed Broadcast Banded Spot Treatments See Application Methods section for additional information on Banded, Spot Treatments and Postemergence- Directed Broadcast applications Weeds < 3” in height 48 fl oz/A (0.88 lbs ai/A) Weeds < 6” in height 56 fl oz/A (1.02 lbs ai/A) Weeds > 6” in height and/or grasses that have tillered 56 fl oz – 82 fl oz/A (1.02 – 1.50 lbs ai/A) Apply to emerged, young, actively growing weeds. Uniform, thorough spray coverage is necessary to achieve consistent weed control. Avoid direct spray, drift or mist to desirable vegetation, green bark, stems or foliage, as injury may occur. Only trunks with callused, mature brown bark may be sprayed unless protected from spray contact by nonporous wraps, grow tubes, or waxed containers. When tank mixing with aresidual herbicide no additional surfactant is needed. May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A. DO NOT apply more than 82 fl oz (1.50 lbs ai)/A in a single application. DO NOT make more than 3 applications per year at the maximum rate of 82 fl oz (1.50 lbs ai)/A DO NOT apply closer than 14 days apart. DO NOT graze, harvest and/or feed treated orchard cover crops to livestock. DO NOT aerially apply. DO NOT apply through anytype of irrigation system. DO NOT make spot spray applications to suckers astree injury may occur. DO NOT apply within 14 days of harvest. DO NOT apply more than 246 fl oz (4.5 lbs ai)/A through any combination ofuse patterns per year.

Internal

Crop Use Pattern Rate/Acre Directions Restrictions CITRUS (Crop Group 10- 10) Calamondin, Citrus citron, Citrus hybrids (chironja, tangelo, tangor), Grapefruit, Kumquat, Lemon, Lime, Mandarin (tangerine), Orange (sour, sweet), Pummelo, Satsuma mandarin and cultivars, varieties and/or hybrids of these Postemergence -Directed Broadcast Banded Spot Treatments

See Application Methods section for additional information on, Banded, Spot Treatments, and Postemergence -Directed Broadcast applications. Weeds < 3” in height 48 fl oz/A (0.88 lbs ai/A) Weeds < 6” in height 56 fl oz/A (1.02 lbs ai/A) Weeds > 6” in height and/or grasses that have tillered 56 fl oz – 82 fl oz/A (1.02 – 1.50 lbs ai/A) Apply to emerged, young, actively growing weeds. Uniform, thorough spray coverage is necessary to achieve consistent weed control. Avoid direct spray, drift or mist to desirable vegetation, green bark, stems or foliage, as injury may occur. Only trunks with callused, mature brown bark may be sprayed unless protected from spray contact by nonporous wraps, grow tubes, or waxed containers. May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A. DO NOT apply more than 82 fl oz (1.50 lbs ai)/A in a single application. DO NOT make more than 3 applications per year at the maximum rate of 82 fl oz (1.50 lbs ai)/A DO NOT apply closer than 14 days apart. DO NOT graze, harvest and/or feed treated orchard cover crops to livestock. DO NOT aerially apply. DO NOT apply through any type of irrigation system. DO NOT make spot spray applications to suckers as tree injury may occur. DO NOT apply within 14 days of harvest. DO NOT apply more than 246 fl oz (4.5 lbs ai)/A through any combination of use patterns per year.

Internal

Crop Use Pattern Rate/Acre Directions Restrictions GRAPES (Crop Group 13-07F)

(Table, Wine,Raisin) Amur river grape, gooseberry, kiwifruit (hardy), maypop, schisandra berry and cultivars, varieties, and/or hybrids of these] Postemergence -Directed Broadcast Banded Spot Treatments

See Application Methods section for additional information on, Banded, Spot Treatments, and Postemergence- Directed Broadcast applications. Weeds < 3” in height 48 fl oz/A (0.88 lbs ai/A) Weeds < 6” in height 56 fl oz/A (1.02 lbs ai/A) Weeds > 6” in height and/or grasses that have tillered 56 fl oz – 82 fl oz/A (1.02 – 1.50 lbs ai/A) Apply to emerged, young, actively growing weeds. Uniform, thorough spray coverage is necessary to achieve consistent weed control. Avoid direct spray, drift or mist to desirable vegetation, green bark, stems, or foliage as injury may occur. Only trunks with callused, mature brown bark may be sprayed unless protected from spray contact by nonporous wraps, grow tubes, or waxed containers. May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A. DO NOT apply more than 82 fl oz (1.50 lbs ai)/A in a single application. DO NOT make more than 3 applications per year at the maximum rate of 82 fl oz (1.50 lbs ai)/A DO NOT apply closer than 14 days apart. DO NOT graze, harvest and/or feed treated orchard cover crops to livestock. DO NOT aerially apply. DO NOT apply through any type of irrigation system. DO NOT make spot spray applications to suckers as tree injury may occur. DO NOT apply within 14 days of harvest. DO NOT apply more than 246 fl oz (4.5 lb ai)/A through any combination of use patterns per year.

Internal

Crop Use Pattern Rate/Acre Directions Restrictions STONE FRUIT (Crop Group 12- 12) Apricot, Cherry (sweet, tart), Nectarine, Peach, Plum (chickasaw, damson, Japanese), Plumcot, Prune (fresh), and cultivars, varieties and/or hybrids of these Postemergen ce-Directed Broadcast Banded Directed Spray Spot Treatments See Application Methods section for additional information on, Banded, Spot Treatments, and Postemergenc e-Directed Broadcast applications. Weeds < 3” in height 48 fl oz/A (0.88 lbs ai/A) Weeds < 6” in height 56 fl oz/A (1.02 lbs ai/A) Weeds > 6” in height and/or grasses that have tillered 56 fl oz – 82 fl oz/A (1.02-1.50 lbs ai/A) Apply to emerged, young, actively growing weeds. Uniform, thorough spray coverage is necessary to achieve consistent weed control. Avoid direct spray, drift or mist to desirable vegetation, green bark, stems,or foliage as injury may occur. Only trunks with callused, mature brown bark may be sprayed unless protected from spray contact by nonporous wraps, grow tubes, or waxed containers. May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A. DO NOT apply more than 82 fl oz (1.50 lbs ai)/A in a single application. DO NOT make more than 2 applications per year at the maximum rate of 82 fl oz (1.50 lbs ai)/A DO NOT apply closer than 28 days apart. DO NOT graze, harvest and/or feed treated orchard cover crops to livestock. DO NOT aerially apply. DO NOT apply through any type of irrigation system. DO NOT make spot spray applications to suckers as tree injury may occur. DO NOT apply within 14 days of harvest. DO NOT apply more than 164 fl oz (3.0 lbs ai)/A throughany combination of use patterns per year.

Internal

Crop Use Pattern Rate/Acre Directions Restrictions TREE NUTS (Crop Group 14) Almond, Beech nut, Brazil nut, Butternut, Cashew, Chestnut, Chinquapin, Filbert (hazelnut), Hickory nut, Macadamia (bush nut), Pecan, Pistachio, Walnut (black and English (Persian)) Postemergen ce-Directed Broadcast Banded Spot Treatments

See Application Methods section for additional information on, Banded, Spot Treatments, and Postemergenc e-Directed Broadcast applications.

Weeds < 3” in height 48 fl oz/A (0.88 lbs ai/A)

Weeds < 6” in height 56 fl oz/A (1.02 lbs ai/A)

Weeds > 6” in height and/or grasses that have tillered 56 fl oz – 82 fl oz/A (1.02 – 1.50 lbs ai/A) Apply to emerged, young, actively growing weeds. Uniform, thorough spray coverage is necessary to achieve consistent weed control. Avoid direct spray, drift or mist to desirable vegetation, green bark, stems, or foliage, as injury may occur. Only trunks with callused, mature brown bark may be sprayed unless protected from spray contact by nonporous wraps, grow tubes, or waxed containers. May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A. DO NOT apply more than 82 fl oz (1.50 lbs ai)/A in a single application. DO NOT make more than 3 applications per year at the maximum rate of 82 fl oz (1.50 lbs ai)/A DO NOT apply closer than 14 days apart. DO NOT graze, harvest and/or feed treated orchard cover crops to livestock. DO NOT aerially apply. DO NOT apply through any type of irrigation system. DO NOT make spot spray applications to suckers as tree injury may occur. DO NOT apply within 14 days of harvest. DO NOT apply more than 246 fl oz (4.5 lbs ai)/A through any combination of use patterns per year. Crop Use Pattern Rate/Acre Directions Restrictions BERRIES (Bushberry Subgroup 13b) Bushberries, blueberry, currant, elderberry, gooseberry, and huckleberry lingonberry, juneberry, salal Postemergen ce-Directed Broadcast Banded Spot Treatments

See Application Methods section for additional information on, Banded, Spot Treatments, and Postemergenc e-Directed Broadcast applications. Weeds < 3” in height 48 fl oz/A (0.88 lbs ai/A) Weeds < 6” in height 56 fl oz/A (1.02 lbs ai/A) Weeds > 6” in height and/or grasses that have tillered 56 fl oz – 82 fl oz/A (1.02 – 1.50 lbs ai/A) Apply to emerged, young, actively growing weeds. Uniform, thorough spray coverage is necessary to achieve consistent weed control. Avoid direct spray, drift or mist to desirable vegetation, green bark, stems, or foliage, as injury may occur. Only trunks with callused, mature brown bark may be sprayed unless protected from spray contact by nonporous wraps, grow tubes, or waxed containers. May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A. DO NOT apply more than 82 fl oz (1.50 lbs ai)/A in a single application. DO NOT make more than 2 applications per year at the maximum rate of 82 fl oz (1.50 lbs ai)/A DO NOT apply closer than 14 days apart. DO NOT graze, harvest and/or feed treated orchard cover crops to livestock. DO NOT aerially apply. DO NOT apply through any type of irrigation system. DO NOT make spot spray applications to suckers as tree injury may occur. DO NOT apply within 14 days of harvest. DO NOT apply more than 164 fl oz (3.0 lbs ai)/A through any combination of use patterns per year.

Internal

Crop Use Pattern Rate/Acre Directions Restrictions

OLIVES Postemergence- Directed Broadcast Banded Spot Treatments

See Application Methods section for additional information on, Banded, Spot Treatments, and Postemergence- Directed Broadcast applications. Weeds < 3” in height 48 fl oz/A (0.88 lbs ai/A) Weeds < 6” in height 56 fl oz/A (1.02 lbs ai/A) Weeds > 6” in height and/or grasses that have tillered 56 fl oz – 82 fl oz/A (1.02 – 1.50 lbs ai/A) Apply to emerged, young, actively growing weeds. Uniform, thorough spray coverage is necessary to achieve consistent weed control. Avoid direct spray, drift or mist to desirable vegetation, green bark, stems, or foliage, as injury may occur. Only trunks with callused, mature brown bark may be sprayed unless protected from spray contact by nonporous wraps, grow tubes, or waxed containers. May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A. DO NOT apply more than 82 fl oz (1.50 lbs ai)/A in a single application. DO NOT make more than 3 applications per year at the maximum rate of 82 fl oz (1.50 lbs ai) DO NOT apply closer than 14 days apart. DO NOT graze, harvest and/or feed treated orchard cover crops to livestock. DO NOT aerially apply. DO NOT apply through any type of irrigation system. DO NOT make spot spray applications to suckers as tree injury may occur. DO NOT apply within 14 days of harvest. DO NOT apply more than 246 fl oz (4.50 lbs ai)/A through any combination of use patterns per year.

Internal

Crop Use Pattern Rate/Acre Directions Restrictions POTATOES Vine Desiccation 21.0 fl oz/A (0.38 lbs ai/A) Apply at the beginning of natural senescence of potato vines. Potato varieties with heavy or dense vines may require an application of another desiccation product to complete vine desiccation. Thorough coverage of the potato vines to be desiccated is essential. Use sufficient volume of water (20 to 100 gpa). Vary the gallons of water per acre and spray pressure as indicated by the density of the potato vines. Increase spray volume to at least 30 gallons of water per acre when potato canopy is dense or under cool and dry conditions. Apply with the spray boom as low as possible to achieve thorough coverage of the potato vines for best control and to minimize drift potential. May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A.

The use of additives or adjuvants other than AMS have been known to cause injury in potatoes under specific conditions and in certain geographies. To the extent consistent with applicable law, the user assumes all risks associated with adding adjuvants, other than AMS, to the LIFELINE spray solution. DO NOT apply to potatoes grown for seed. DO NOT apply more than 21 fl oz (0.38 lbs ai)/A in a single application. DO NOT split application or make more than 1 application per year. DO NOT harvest potatoes until 9 days or more after application. DO NOT apply more than 21.0 fl oz/(0.38 lbs ai)/A per year.

• Canola, corn, cotton, soybean and sugar beets may be planted at any time after an application of LIFELINE Herbicide as a potato vine desiccant.
• Wheat, barley, buckwheat, millet, oats, rye sorghum or triticale may be planted 30 days or more after an application of LIFELINE Herbicide as a potato vine desiccant.
• All other crops may be planted 120 or more days after an application of LIFELINE Herbicide as a potato vine desiccant.

Internal

Crop Use Pattern Rate/Acre Directions Restrictions GRASS GROWN FOR SEED PRODUCTION (OR, ID, WA) Fall Broadcast For severe weed pressure in newly established fields, applications may occur after the 1st tiller of the crop is established.

For established fields, applications may be made to crops with a minimum of 4 tillers.

If additional control is required following a fall application, one spring broadcast application may also be made.

Spring Broadcast Apply to actively growing grass seed fields in the 4-6 tiller growth state. Spring Hooded or Shielded Directed Spray

See Application Methods section for additional information on Spring Hooded or Shielded Directed Spray. Fall Broadcast Application to Newly Established Fields

10 fl oz/A (0.18 lbs ai).

Fall or Spring Broadcast Application to Established Fields 16.5 - 20 fl oz/A (0.30 0.37lbs ai). Refer to the Important Crop Safety Information Read Before Using This Product section prior to use. For best weed control and crop safety, apply when the grass seed crop is actively growing in the fall and/or spring to minimize potential for crop injury. Tolerance of grasses to LIFELINE Herbicide is species dependent. Species tolerance in descending order is: 1) perennial ryegrass; 2) tall fescue; 3) bentgrass; 4) fine fescue; 5) Poa species. For example, perennial ryegrass tends to be more tolerant to LIFELINE Herbicide than Poa species. Directed shielded sprays are required in bentgrass, fine fescue, orchardgrass and Poa species grown for seed production. Broadcast applications made after 1 st node development can increase the potential for crop injury and yield loss. Apply LIFELINE Herbicide in a minimum of 20 gallons/A of water at 30 to 40 psi. May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A. Additional surfactants or crop oils may increase risk of crop response Stunting of grass grown for seed production may occur following application and, in some instances, seed yields may be adversely affected. Crop injury, loss, or damage may occur from the use of this product. UPL recommends that the user and/or grower first test this product on a small scale to determine its suitability for such intended use prior to application and large scale use of this product. Preharvest Interval (PHI) or Pregrazing Interval (PGI) to livestock for LIFELINE-treated grass forage and hay – 90 days. There is no required Preharvest Interval (PHI) to grass seed harvest. Straw remaining after grass seed harvest may be fed to or grazed by livestock. DO NOT apply LIFELINE Herbicide when grass grown for seed production is stressed due to drought, heat, frost, flooding, poor fertility, diseases, insects, or other reasons. DO NOT broadcast apply LIFELINE Herbicide on bentgrass, fine fescue, orchardgrass, or Poa species grown for seed. DO NOT make fall applications after December 1 st in either seedling or established fields. DO NOT make spring applications after April 1st except when severe weed pressure necessitates control. DO NOT apply more than 10 fl oz/A (0.18 lbs ai) when making a fall broadcast application to newly established fields. DO NOT apply more than 20 fl oz/A (0.37 lbs ai) when making a fall or spring broadcast application to established fields. DO NOT make more than 2 broadcast applications per year (1 in the fall and 1 in the spring). The minimum retreatment interval for this product is 60 days. DO NOT apply more than a cumulative total of 40 fl oz (0.73 lbs ai) for sequential broadcast applications per year. DO NOT apply more than 82 fl oz (1.50 lbs ai) when making a hooded or shielded direct spray application. DO NOT make more than 1 hooded or shielded direct spray application per year. DO NOT apply aerially or through any type of irrigation system in grass grown for seed production. Spring Hooded or Shielded Directed Spray for weeds < 8” in height 55.0 fl oz/A (1.01 lbs ai) Spring Hooded or Shielded Directed Spray for weeds > 8” in height 82 fl oz/A (1.50 lbs ai) DO NOT allow product to drift off the intended field of grass grown for seed production. Drift control is the responsibility of the applicator. Refer to local state laws, regulations, and guidelines for proper application techniques to avoid off-target movement.

Internal

Crop Use Pattern Rate/Acre Directions Restrictions AVOCADO[*]

Including Guatemalan, Mexican, and West Indian Postemergence- Directed Broadcast Banded Spot Treatments

See Application Methods section for additional information on, Banded, Spot Treatments, and Postemergence- Directed Broadcast applications. Weeds < 3” in height 48 fl oz/A (0.88 lbs ai/A) Weeds < 6” in height 56 fl oz/A (1.02 lbs ai/A) Weeds > 6” in height and/or grasses that have tillered 56 fl oz – 82 fl oz/A (1.02 – 1.50 lbs ai/A) Apply to emerged, young, actively growing weeds. Uniform, thorough spray coverage is necessary to achieve consistent weed control. Avoid direct spray, drift or mist to desirable vegetation, green bark, stems, or foliage, as injurymay occur. Only trunks with callused,mature brown bark may be sprayed unless protected from spray contact by nonporous wraps, grow tubes, or waxed containers. May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A. DO NOT apply more than 82 fl oz (1.50 lbs ai)/A in a single application. DO NOT make more than 3 applications per year at the maximum rate of 82 fl oz (1.50 lbs ai) DO NOT apply closer than 30 days apart. DO NOT apply more than 246 fl oz (4.50 lbs ai)/A through any combination of use patterns per year. DO NOT aerially apply to Avocado. DO NOT apply through any type of irrigation system. DO NOT make spot spray applications to suckers as tree injury may occur. DO NOT apply within 0.5 days of harvest. *Not registered for use in California

Internal

Crop Use Pattern Rate/Acre Directions Restrictions FIG[*] Postemergence- Directed Broadcast Banded Spot Treatments

See Application Methods section for additional information on, Banded, Spot Treatments, and Postemergence- Directed Broadcast applications. Weeds < 3” in height 48 fl oz/A (0.88 lbs ai/A) Weeds < 6” in height 56 fl oz/A (1.02 lbs ai/A) Weeds > 6” in height and/or grasses that have tillered 56 fl oz – 82 fl oz/A (1.02 – 1.50 lbs ai/A) Apply to emerged, young, actively growing weeds. Uniform, thorough spray coverage is necessary to achieve consistent weed control. Avoid direct spray, drift or mist to desirable vegetation, green bark, stems, or foliage, as injurymay occur. Only trunks with callused, mature brown bark may be sprayed unless protected from spray contact by nonporous wraps, grow tubes, or waxed containers. May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A. DO NOT apply more than 82 fl oz (1.50 lbs ai)/A in a single application. DO NOT make more than 3 applications per year at the maximum rate of 82 fl oz (1.50 lbs ai) DO NOT apply closer than 30 days apart. DO NOT apply more than 246 fl oz (4.50 lbs ai)/A through any combination of use patterns per year. DO NOT aerially apply to Fig. DO NOT apply through any type of irrigation system. DO NOT make spot spray applications to suckers as tree injury may occur. DO NOT apply within 0.5 day of harvest. *Not registered for use in California

Internal

Crop Use Pattern Rate/Acre Directions Restrictions TROPICAL AND SUBTROPICAL FRUITS: MEDIUM TO LARGE FRUIT, EDIBLE PEEL[*] (Crop Group 23B, except Fig)

Achachairu, ambarella, araza, babaco, bilimbi, borojo, cajou (fruit), cambuca, carob, cashew apple, ciruela verde, Davidson’s plum, feijoa, gooseberry (Indian), guava (including cattley, para, purple strawberry, strawberry, yellow strawberry), imbe, imbu, jaboticaba, jujube (Indian), kwai muk, mangaba, Marian plum, mombin (including Malayan and purple), monkeyfruit, nance, natal plum, noni, papaya (mountain), persimmon (Japanese), pomerac, rambai, rose apple, sentul, starfruit, Surinam cherry, tamarind, uvalha and cultivars, varieties and/or hybrids of these Postemergence- Directed Broadcast Banded Spot Treatments

See Application Methods section for additional information on, Banded, Spot Treatments, and Postemergence- Directed Broadcast applications. Weeds < 3” in height 48 fl oz/A (0.88 lbs ai/A) Weeds < 6” in height 56 fl oz/A (1.02 lbs ai/A) Weeds > 6” in height and/or grasses that have tillered 56 fl oz – 82 fl oz/A (1.02 – 1.50 lbs ai/A) Apply to emerged, young, actively growing weeds. Uniform, thorough spray coverage is necessary to achieve consistent weed control. Avoid direct spray, drift or mist to desirable vegetation, green bark, stems, or foliage, as injurymay occur. Only trunks with callused, mature brown bark may be sprayed unless protected from spray contact by nonporous wraps, grow tubes, or waxed containers. May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A. DO NOT apply more than 82 fl oz (1.50 lbs ai)/A in a single application. DO NOT make more than 3 applications per year at the maximum rate of 82 fl oz (1.50 lbs ai) DO NOT apply closer than 30 days apart. DO NOT apply more than 246 fl oz (4.50 lbs ai)/A through any combination of use patterns per year. DO NOT aerially apply to Tropical and Subtropical Fruits. DO NOT apply through any type of irrigation system. DO NOT make spot spray applications to suckers as tree injury may occur. DO NOT apply within 1 day of harvest. For spot treatments, apply as needed for the desired weed control but DO NOT exceed the equivalent of 1.50 lbs ai/A (1.88 fl oz per 1000 square feet) per application or 4.5 lbs ai/A (5.65 fl oz per 1000 square feet) from applications per year.

• Not registered for use by California and New York

Internal

Crop Use Pattern Rate/Acre Directions Restrictions TROPICAL AND SUBTROPICAL FRUIT: SMALL FRUIT, INEDIBLE PEEL[*] (Crop Group 24A)

Aisen, bael fruit, Burmese grape, cat’s-eyes, inga, longan, lychee, madras-thorn, manduro, matisia, mesquite, mongongo (fruit), pawpaw (small- flower), satinleaf, Sierra Leone- tamarind, Spanish lime, velvet tamarind, wampi, white star apple and cultivars, varieties and/or hybrids of these Postemergence- Directed Broadcast Banded Spot Treatments

See Application Methods section for additional information on, Banded, Spot Treatments, and Postemergence- Directed Broadcast applications. Weeds < 3” in height 48 fl oz/A (0.88 lbs ai/A) Weeds < 6” in height 56 fl oz/A (1.02 lbs ai/A) Weeds > 6” in height and/or grasses that have tillered 56 fl oz – 82 fl oz/A (1.02 – 1.50 lbs ai/A) Apply to emerged, young, actively growing weeds. Uniform, thorough spray coverage is necessary to achieve consistent weed control. Avoid direct spray, drift or mist to desirable vegetation, green bark, stems, or foliage, as injurymay occur. Only trunks with callused, mature brown bark may be sprayed unless protected from spray contact by nonporous wraps, grow tubes, or waxed containers. May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A. DO NOT apply more than 82 fl oz (1.50 lbs ai)/A in a single application. DO NOT make more than 3 applications per year at the maximum rate of 82 fl oz (1.50 lbs ai) DO NOT apply closer than 30 days apart. DO NOT apply more than 246 fl oz (4.50 lbs ai)/A through any combination of use patterns per year. DO NOT aerially apply to Tropical and Subtropical Fruit. DO NOT apply through any type of irrigation system. DO NOT make spot spray applications to suckers as tree injury may occur. DO NOT apply within 1 day of harvest. For spot treatments, apply as needed for the desired weed control but DO NOT exceed the equivalent of 1.50 lbs ai/A (1.88 fl oz per 1000 square feet) per application or 4.5 lbs ai/A (5.65 fl oz per 1000 square feet) from applications per year.

• Not registered for use by California and New York

Internal

Crop Use Pattern Rate/Acre Directions Restrictions TROPICAL AND SUBTROPICAL FRUIT: MEDIUM TO LARGE FRUIT, SMOOTH INEDIBLE PEEL[*] (Crop Group 24B, except Avocado)

Abiu, akee apple, bacury, banana (including dwarf), binjai, canistel, capuacu, etambe, jatoba, kei apple, langsat, lanjut, lucuma, mabolo, mango (including horse and Saipan), mangosteen, paho, papaya, pawpaw (common), pelipisan, pequi, pequia, persimmon (American), plantain, pomegranate, poshte, quandong, sapote (including black, green, and white), sataw, screw-pine, star apple, tamarind-of- the-Indies, wild loquat and cultivars, varieties, and/or hybrids of these Postemergenc e-Directed Broadcast Banded Spot Treatments

See Application Methods section for additional information on, Banded, Spot Treatments, and Postemergence -Directed Broadcast applications. Weeds < 3” in height 48 fl oz/A (0.88 lbs ai/A) Weeds < 6” in height 56 fl oz/A (1.02 lbs ai/A) Weeds > 6” in height and/or grasses that have tillered 56 fl oz – 82 fl oz/A (1.02 – 1.50 lbs ai/A) Apply to emerged, young,actively growing weeds. Uniform, thorough spray coverage is necessary toachieve consistent weedcontrol. Avoid direct spray, drift or mist to desirable vegetation, green bark, stems, or foliage, as injurymay occur. Only trunks with callused,mature brown bark may be sprayed unless protected from spray contact by nonporous wraps, grow tubes, or waxed containers. May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A. DO NOT apply more than 82 fl oz (1.50 lbs ai)/A in a single application. DO NOT make more than 3 applications per year at the maximum rate of 82 fl oz (1.50 lbs ai) DO NOT apply closer than 30 days apart. DO NOT apply more than 246 fl oz (4.50 lbs ai)/A through any combination of use patterns per year. DO NOT aerially apply to Tropical and Subtropical Fruit. DO NOT apply through any type of irrigation system. DO NOT make spot spray applications to suckers as tree injury may occur. DO NOT apply within 1 day of harvest. For spot treatments, apply as needed for the desired weed control but DO NOT exceed the equivalent of 1.50 lbs ai/A (1.88 fl oz per 1000 square feet) per application or 4.5 lbs ai/A (5.65 fl oz per 1000 square feet) from applications per year.

• Not registered for use by California and New York

l Crop Use Pattern Rate/Acre Directions Restrictions FRUITING VEGETABLES (Crop Groups 8- 10A and 8-10B)[*] Bush tomato, cocona, currant tomato, garden huckleberry, gofi berry, groundcherry, naranjilla, sunberry, tomatillo, tomato, tree tomato and cultivars, varieties, and/or hybrids of these. African eggplant, bell pepper, eggplant, Martynia, nonbell pepper, okra, pea eggplant, pepino, roselle, scarlet eggplant and cultivars, varieties, and/or hybrids of these. Broadcast Preplant Burndown Preplant burndown application to bare soil surface prior to transplanting.

OR

Preplant burndown application to pre- formed beds covered with plastic mulch and shaped such that water and herbicide run off between rows.

See Rotational Crop Restrictions section for additional information on transplanting and direct-seeding intervals following a burndown application(s). Crop injury may occur if rotational intervals are not followed. 29.0 – 43.0 fl oz/A (0.53 – 0.79 lbs ai/A) Apply to emerged, young, actively growing weeds. Uniform, thorough spray coverage is necessary to achieve consistent weed control. When applied after crop establishment, LIFELINE must be applied by hooded sprayer in a directed band between rows to protect the crop from spray contact. Direct spray contact, drift or mist to crop foliage or fruit will cause severe crop injury. May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A. DO NOT apply more than 43 fl oz (0.79 lbs ai)/A in a single preplant burndown application to bare soil or to plastic mulch covered beds. DO NOT make more than 3 preplant burndown applications to bare soil. DO NOT apply more than 87 fl oz (1.59 lbs ai)/A total through preplant burndown applications to bare soil.

[Alternative text: DO NOT make more than 1 preplant burndown application to bare soil not to exceed a rate of 43 fl oz (0.79 lbs ai)/A.] DO NOT make more than 2 preplant burndown applications to plastic mulch covered beds. DO NOT apply more than 64 fl oz (1.17 lbs ai)/A total through preplant burndown applications to plastic mulch covered beds. [Alternative text: DO NOT make more than 3 preplant burndown applications to plastic mulch covered beds. DO NOT apply more than 87 fl oz (1.59 lbs ai)/A total through preplant burndown applications to plastic mulch covered beds.] [Alternative text: DO NOT apply more than 1 preplant burndown application to plastic mulch covered beds before planting not to exceed a rate of 43 fl oz (0.79 lbs ai)/A.] Regardless of precipitation occurring, DO NOT transplant or direct-seed into or within 6 inches of holes in the plastic mulch that exist at the time of preplant burndown application(s) to plastic mulch covered beds. Following a preplant burndown application to plastic mulch covered beds, DO NOT direct seed or transplant within 27 days if less than ½ inch of precipitation/overhead irrigation occurs DO NOT apply more than 62 fl oz (1.13 lbs ai)/A in a single hooded postemergence row middles application. DO NOT make more than 2 hooded postemergence row middles applications before harvest.

Hooded Postemergence Row Middles (Banded between crop rows of established fruiting vegetables) See Application Methods section for additional information on Hooded Postemergence Row Middles applications. 29.0 – 62.0 fl oz/A (0.53 – 1.13 lbs ai/A)

DO NOT apply more than 62 fl oz (1.13 lbs ai)/A total through hooded postemergence row middles applications. DO NOT concentrate LIFELINE in the treated band in row middles when making a hooded postemergence row middles application. The use rate specified is for treated area. DO NOT make more than 3 applications per year through any combination of burndown or hooded postemergence row middles applications. DO NOT apply more than 87 fl oz (1.59 lbs ai)/A total through any combination of burndown or hooded postemergence row middles applications. [Alternate text: DO NOT apply more than 62 fl oz (1.17 lbs ai)/A total through any combination of burndown or hooded postemergence row middles application.] DO NOT spray within 6 inches of running vines when crop is grown on flat beds. DO NOT allow spray solution or spray drift to contact the crop foliage or fruit or severe crop injury will occur. DO NOT apply this product if spray drift cannot be controlled or if spray contact with crop foliage cannot be avoided. DO NOT apply sequential applications closer than 7 [Alternate text: 14] days apart. DO NOT aerially apply to fruiting vegetables postemergence. DO NOT apply through any type of irrigation system. DO NOT apply within 30 days of harvest for fruiting vegetables

• Not registered for use by California

Crop Use Pattern Rate/Acre Directions Restrictions CUCURBITS (Crop Groups 9A and 9B)[*]

Citron melon, muskmelon (includes true cantaloupe, cantaloupe, casaba, Crenshaw melon, golden pershaw melon, honeydew melon, honey balls, mango melon, Persian melon, pineapple melon, Santa Claus melon, and snake melon), and watermelon

Chayote (fruit), Chinese waxgourd, cucumber, gherkin, edible gourd, momordica spp. (includes balsam apple, balsam pear, bitter melon, Chinese cucumber), pumpkin, summer squash (includes crookneck squash, scallop squash, straightneck squash, vegetable marrow, zucchini), and winter squash (includes butternut squash, calabaza, Hubbard squash, acorn squash, spaghetti squash) Broadcast Preplant Burndown Preplant burndown application to bare soil surface prior to transplanting.

OR

Preplant burndown application to pre- formed beds covered with plastic mulch and shaped such that water and herbicide run off between rows.

See Rotational Crop Restrictions section for additional information on transplanting and direct-seeding intervals following a preplant burndown application(s). Crop injury may occur if rotational intervals are not followed. 29.0 – 43.0 fl oz/A (0.53 – 0.79 lbs ai/A) Apply to emerged, young, actively growing weeds. Uniform, thorough spray coverage is necessary to achieve consistent weed control. When applied after crop establishment, LIFELINE must be applied by hooded sprayer in a directed band between rows to protect the crop from spray contact. Direct spray contact, drift or mist to crop foliage or fruit will cause severe crop injury. May be applied with ammonium sulfate (AMS) at 1.5 – 3 lbs/A. DO NOT apply more than 43 fl oz (0.79 lbs ai)/A in a single preplant burndown application to bare soil or to plastic mulch covered beds. DO NOT make more than 3 preplant burndown applications to bare soil. DO NOT apply more than 87 fl oz (1.59 lbs ai)/A total through preplant burndown applications to bare soil. [Alternative text: DO NOT make more than 1 preplant burndown application to bare soil not to exceed a rate of 43 fl oz (0.79 lb ai)/A.]

DO NOT make more than 2 preplant burndown applications to plastic mulch covered beds. DO NOT apply more than 64 fl oz (1.17 lbs ai)/A total through preplant burndown applications to plastic mulch covered beds.

[Alternative text: DO NOT make more than 3 preplant burndown applications to plastic mulch covered beds. DO NOT apply more than 87 fl oz (1.59 lbs ai)/A total through preplant burndown applications to plastic mulch covered beds.] [Alternative text: DO NOT apply more than 1 preplant burndown application to plastic mulch covered beds before planting not to exceed a rate of 43 fl oz (0.79 lbs ai)/A.

Regardless of precipitation occurring, DO NOT transplant into or within 6 inches of holes in the plastic mulch that exist at the time of burndown application to plastic mulch covered beds.

Following a preplant burndown application to plastic mulch covered beds, DO NOT direct seed or transplant within 27 days if less than ½ inch of precipitation/overhead irrigation occurs DO NOT apply more than 62 fl oz (1.13 lbs ai)/A in a single hooded postemergence row middles application.

DO NOT make more than 2 hooded postemergence row middles applications before harvest. DO NOT apply more than 62 fl oz (1.13 lbs ai)/A total through hooded postemergence row middles applications.

Hooded Postemergence Row Middles (Banded between crop rows of established cucurbits) See Application Methods section for additional information on Hooded Postemergence Row Middles applications. 29.0 – 62.0 fl oz/A (0.53 – 1.13 lbs ai/A)

DO NOT concentrate LIFELINE in the treated band in row middles when making a hooded postemergence row middles application. The use rate specified is for treated area. DO NOT make more than 3 applications per year through any combination of burndown or hooded postemergence row middles applications. DO NOT apply more than 87 fl oz (1.59 lbs ai)/A total through any combination of burndown or hooded postemergence row middles applications. [Alternate text: DO NOT apply more than 62 fl oz (1.17 lbs ai)/A total through any combination of burndown or hooded postemergence row middles application.] DO NOT spray within 6 inches of running vines when crop is grown on flat beds. DO NOT allow spray solution or spray drift to contact the crop foliage or fruit or severe crop injury will occur. DO NOT apply this product if spray drift cannot be controlled or if spray contact with crop foliage cannot be avoided. DO NOT apply sequential applications closer than 7 [Alternate text: 14] days apart. DO NOT aerially apply to cucurbits postemergence. DO NOT apply through any type of irrigation system. DO NOT apply within 30 days of harvest in melons. DO NOT apply within 14 days of harvest in cucumbers, gourds, pumpkin, and squashes.

• Not registered for use by California

SUCKER CONTROL When applied to suckers that are young, green, and uncalloused, LIFELINE Herbicide will reduce or eliminate sucker growth. For sucker control, make a split application approximately 4 weeks apart at 56 fl oz of product/A (1.02 lbs ai/A) in a broadcast application. Thorough coverage of all sucker foliage is necessary for optimum control. Suckers must not exceed 12 inches in length. DO NOT make spot applications to trunk as injury may occur.

TANK MIX PARTNER INSTRUCTIONS

Because LIFELINE Herbicide does not provide residual weed control or control of unexposed plant parts, certain herbicide tank mixes may aid in the performance of LIFELINE Herbicide or be added to provide residual herbicide activity. No additional surfactant is needed with any tank mix partner. LIFELINE Herbicide may be applied in tank mix combinations with labeled rates of other products that are labeled for the timing and method of application for the crop to be treated. Always use the tank mix partner in accordance with the label limitations and restrictions. DO NOT exceed label dosage rates. LIFELINE Herbicide may not be mixed with any product containing a label prohibition against such mixing. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.

APPLICATION METHODS

COTTON NOT DESIGNATED AS GLUFOSINATE-RESISTANT Application of LIFELINE Herbicide to cotton varieties not designated as glufosinate-resistant requires the use of hooded spray equipment designed to minimize exposure of the spray to the cotton stand. A hooded sprayer directs the spray onto weeds, while shielding the cotton stand from contact. Use nozzles that provide uniform coverage within the treated area. Keep hoods on these sprayers adjusted to protect desirable vegetation. Extreme care must be exercised to avoid exposure of the desirable vegetation to the spray. With a hooded sprayer, the spray pattern is completely enclosed on the top and all 4 sides by a hood. This equipment must be set up and operated in a manner that avoids bouncing or raising the hoods off the ground in any way. The spray hoods must be operated on the ground or skimming across the ground. Tractor speed must be adjusted to avoid bouncing of the spray hoods. Avoid operation on rough or sloping ground where the spray hoods might be raised off the ground as this may cause spray particles to escape and come into contact with the cotton, causing damage or destruction of the crop. Herbicide rates and spray volume instructions are presented as broadcast equivalents and must be reduced in proportion to the area actually treated. Use the following formulas to calculate the correct rate and volume per planted (field) acre: Band width in inches Row width in inches X Broadcast RATE per acre = Amount of banded product needed per acre

Band width in inches Row width in inches X Broadcast spray VOLUME per acre = Banded spray volume needed per acre

BANDED SPRAY APPLICATIONS – TREE, VINES AND BERRIES Banded applications may be used using the following formula to calculate the amount of herbicide needed for orchard or vineyard strip sprays: Band width in inches x Rate per acre = Amount of herbicide Row width in inches broadcast needed for treatment

SPOT OR DIRECTED SPRAY APPLICATIONS –TREE, VINES AND BERRIES For spot or directed spray applications mix LIFELINE Herbicide at 1.7 fl oz of product (0.33 lbs ai) per gallon of water. Apply to undesirable vegetation foliage until wet but prior to runoff. Ensure uniform and complete coverage. Thoroughly clean the sprayer following use. DO NOT make spot or directed spray applications to tree or vine trunk as injury may occur.

BROADCAST-DIRECTED SPRAY APPLICATIONS – TREE, VINE, AND BERRIES For post-emergence control of weeds in labelled use sites, apply LIFELINE Herbicide at 48 – 82 fl oz/A (0.88 – 1.50 lbs ai) as a broadcast-directed spray anytime during the season up to the day of harvest. Use rate is dependent on target weed growth size and stage, reference the WEEDS CONTROLLED TABLE for the respective use site. Direct the spray away from desirable vegetation and plant parts. Avoid contact of LIFELINE Herbicide solution spray, drift, or mist with green bark, stems, foliage, or fruit as injury may occur to trees. Only trunks with callused, mature brown bark may be sprayed unless protected from spray contact by nonporous wraps, grow tubes, or waxed containers. Contact of LIFELINE Herbicide with parts of trees other than mature brown bark can result in serious damage.

SPRING HOODED OR SHIELDED DIRECTED SPRAY APPLICATIONS – GRASS GROWN FOR SEED PRODUCTION To avoid excessive crop phytotoxicity, use a hooded or shielded sprayer. Apply by directing spray between rows and using shielded directed sprayers to prevent spray contact with crop plants. Adjust shields to prevent spray from contacting the crop. Hooded sprayers must be designed, adjusted, and operated in such a manner to totally enclose the spray pattern and prevent any spray deposition onto crop foliage and parts. Sprayers must be operated slowly to minimize bouncing of the boom and hoods. Hoods must be positioned so their height runs along the soil surface. When making a hooded or shielded directed spray applications for grass grown for seed production, LIFELINE Herbicide should not be concentrated in row middles. The use rate specified is for treated area within the banded application between rows. Hooded or shielded directed spray applications for grass grown for seed production may be used using the following formula to calculate the amount of herbicide needed for banded application in row middles: Band width in inches x Rate per acre = Amount of herbicide Row width in inches broadcast needed for treatment

HOODED POSTEMERGENCE ROW MIDDLES APPLICATIONS (BANDED BETWEEN CROP ROWS) – FRUITING VEGETABLES AND CUCURBITS To avoid spray solution or spray drift contact with and severe injury of crop foliage or fruit, LIFELINE Herbicide must be applied with a hooded sprayer in a directed band between rows to protect the crop from spray contact. Hooded sprayers must be designed, adjusted, and operated in such a manner to totally enclose the spray pattern and prevent any spray deposition onto crop foliage, blooms, or fruit. Sprayers must be operated slowly to minimize bouncing of the boom and hoods. Hoods must be positioned so their height runs along the soil surface or no higher than the shoulder of beds. When crop is grown on flat beds, LIFELINE Herbicide should not be sprayed within 6 inches of running vines. In geographies where hooded sprayers are not available, use precision directed spray application equipment with nozzles adjusted to prevent spray contact with crop plants. LIFELINE Herbicide should not be applied if spray drift cannot be controlled or if spray contact with crop foliage cannot be avoided.

When making a hooded postemergence row middles application, LIFELINE Herbicide should not be concentrated in row middles. The use rate specified is for treated area within the banded application between rows. Hooded postemergence row middles applications may be used using the following formula to calculate the amount of herbicide needed for banded application in row middles: Band width in inches x Rate per acre = Amount of herbicide Row width in inches broadcast needed for treatment

TANK MIXTURES

For all crops certain herbicide tank mixes may aid in the performance of LIFELINE Herbicide or be added to provide residual herbicide activity. When tank mixing with a residual herbicide no additional surfactant is needed. LIFELINE Herbicide may be applied in tank mix combinations with labeled rates of other products labeled for the timing and method of application for the crop to be treated. The tank mix partner must be used in accordance with the label limitations and restrictions. No label dosage rates may be exceeded. LIFELINE Herbicide may not be mixed with any product containing a label prohibition against such mixing. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.

LIFELINE Herbicide is compatible in tank mixes with many other herbicides. When tank mixing LIFELINE Herbicide with other herbicides, follow the label with the most restrictive directions for use and precautions. No label dosage rates may be exceeded. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture. A compatibility test must be conducted with any potential tank mix partner. Using a clear glass quart jar, conduct the test as described below:

1. Fill the jar three-quarters full with water.
2. Add the appropriate amount of herbicide in the following order: (a) dry flowable, (b) wettable powder, (c) aqueous suspensions, (d) flowables, (e) liquids and (f) solutions and emulsifiable or liquid concentrates. Shake or gently stir jar after each addition to thoroughly mix.
3. After adding all ingredients, let the mixture stand for 15 minutes and then look for separation, large flakes, precipitates, gels, and heavy oily film on the jar or other signs of incompatibility.
4. If the compatibility test shows signs of incompatibility, DO NOT tank mix the product tested with LIFELINE Herbicide.

APPLICATION DIRECTIONS FOR CANOLA, CORN, COTTON, AND SOYBEAN SEED PROPAGATION

LIFELINE Herbicide may be applied during seed propagation to select out susceptible “segregates,” i.e., canola, corn, cotton, and soybean plants that are not designated as glufosinate-resistant. Ŷ Canola: LIFELINE Herbicide may also be used in canola seed propagation as a foliar spray to selectively eliminate canola plants that are not designated as glufosinate-resistant and as such, can be applied to remove susceptible segregates during canola seed propagation. Breeding material not possessing the trait will be severely injured or killed if treated with this herbicide. See Application Instructions and Crop Use Directions on Canola for use rates and application timing. Ŷ Corn: Inbred lines (plants not designated as glufosinate-resistant) will be severely injured or killed if treated with this herbicide. A hooded sprayer may be used to protect plants from coming into contact with the herbicide application. For the selection of glufosinate-resistant corn “segregates”, apply LIFELINE Herbicide at 22 fl oz/A (0.40 lbs ai/A) plus AMS at 3 lbs/A (17 lbs/100 gallons) when corn is in the V-3 to V-4 stage of growth, i.e., 3 to 4 developed collars. Make a second treatment of 22 fl oz/A (0.40 lbs ai/A) plus AMS at 3 lbs/A when the corn is in the V-6 to V-7 stage of growth or up to 24” tall. Make sequential applications at least 10 days apart. When temperatures exceed 85° F, the rate of AMS can be reduced to 1.5 lbs/A (8.5 lbs/100 gallons) to reduce potential leaf burn. Ŷ Cotton: use LIFELINE Herbicide in cotton seed propagation as a foliar spray to selectively eliminate cotton plants that are not designated as glufosinate-resistant, removing susceptible segregates during cotton seed propagation.

Breeding material not possessing this trait will be severely injured or killed if treated with this herbicide. See Application Instructions and Crop Use Directions on Cotton for use rates and application timing.

Ŷ Soybeans: For the selection of glufosinate-resistant soybean “segregates”, apply LIFELINE Herbicide at up to 22 to 43 fl oz/A (0.40 – 0.79 lbs ai/A) when soybean is in the third trifoliate stage. Make a second treatment of 22 to 43 fl oz/A (0.40 – 0.79 lbs ai/A) up to but not including the bloom growth stage of soybean. Make sequential applications at least 5 days apart.

Restrictions • DO NOT apply more than 2 applications per year to glufosinate-resistant corn, cotton, or soybean for seed propagation. Sequential applications must be at least 10 days apart for corn and at least 5 days apparat for cotton and soybean. • DO NOT apply more than 22 fl oz/A (0.40 lbs ai/A) in a single application or more than 44 fl oz/A (0.80 lbs ai/A) per year to glufosinate-resistant corn for seed propagation. • DO NOT apply more than 3 applications per year to glufosinate-resistant canola for seed propagation. • Sequential applications must be at least 7 days apart for applications made to glufosinate-resistant canola for seed propagation.. • DO NOT more than 29 fl oz/A (0.53 lbs ai/A) in a single application to glufosinate-resistant canola for seed propagation. • DO NOT make applications beyond early bolting stage or within 65 days of harvesting canola seed. • DO NOT use treated canola seed for food, feed or oil purposes. • DO NOT apply this product if canola shows injury from prior herbicide applications or environmental stress (drought, excessive rainfall, etc.). • DO NOT apply this product through any type of irrigation system. • DO NOT apply more than 43 fl oz/A (0.79 lbs ai/A) in a single application to glufosinate-resistant soybean for seed propagation. • DO NOT apply more than 87 fl oz/A (1.59 lbs ai/A) per year to glufosinate-resistant soybean or canola for seed propagation.

FALLOW FIELDS OR POST HARVEST

LIFELINE Herbicide may be used as a substitute for tillage in fallow fields to control or suppress weeds listed in the Weed Control Table section of this label. Applications may be made in fallow fields, post-harvest, before planting or emergence of any crop listed on this label. Apply LIFELINE Herbicide at 22 - 29 fl oz/A (0.40 – 0.53 lbs ai/A) to fallow fields to control specific weeds. LIFELINE Herbicide must be applied with ammonium sulfate. Tank mixes with 2,4-D, glyphosate or atrazine and LIFELINE Herbicide will enhance total weed control. Always follow the precautions and directions of use of the most restrictive label of products used in tank mix combinations. See the Application and Mixing Procedures section of this label for additional information on how to apply this product. See the Product Information section of this label for rotational crop restrictions. Restrictions • DO NOT apply more than 29 fl oz/A (0.53 lbs ai)/A in a single application. • DO NOT make more than 1 application per year. • DO NOT apply more than 29 fl oz (0.53 lbs ai)/A per year.

NONCROP USES

WHEN TO APPLY LIFELINE Herbicide is a foliar-active material and works best when weeds are actively growing and applied from dawn to 2 hours before sunset. Weed control may be reduced when applications are made to weeds under stress due to drought or cool temperatures.

Weeds under stress or in dense populations will require application of the highest rate indicated. Always apply at the labeled rate. Repeat applications or tank mixes of LIFELINE Herbicide plus one or more appropriate residual herbicides will be needed to control weeds emerging from underground reproductive structures or seeds. When tank mixing with other herbicides, follow the label with the most restrictive directions for use and precautions. No label dosage rates may be exceeded. Regrowth may occur due to the weed stage of growth, low use rate, or environmental conditions at the application timing. Repeat treatments may be necessary to control weeds emerging from underground reproductive structures or seeds.

GENERAL USE RESTRICTIONS (NON-CROP USE) • DO NOT apply this product through any type of irrigation system. • DO NOT apply directly to or allow drift or mist to contact desirable green tissue or green, thin, or uncalloused bark of desirable vegetation. Spray, mist, or drift should not be allowed to contact desirable vegetation as serious injury may occur. • DO NOT allow grazing of vegetation treated with LIFELINE.

NON-CROP USE SITES AND APPLICATION DIRECTIONS FARMSTEAD, RECREATIONAL, PRIVATE, MILITARY AND PUBLIC AREAS When applied as listed, LIFELINE Herbicide controls undesirable vegetation in non-crop areas from the following table on military, private, and public lands. Apply as a broadcast or spot or directed spray treatment depending on the situation to control weeds. Regrowth may occur due to the weed stage of growth at application, low use rate, or environmental conditions. Repeat applications may be necessary to control plants generating from underground reproductive parts or seed.

Apply LIFELINE to emerged, young, actively growing weeds. Uniform, thorough spray coverage is necessary to achieve consistent weed control. LIFELINE may be applied with ammonium sulfate (AMS) at 2 – 4 lbs/A.

USE PATTERN RATE/ACRE Broadcast • Avoid drift and direct contact with desirable vegetation.

48 – 82 fl oz/A (0.88 – 1.50 lbs ai/A) FARMSTEAD, RECREATIONAL, PRIVATE, MILITARY AND PUBLIC AREA NON-CROP USE SITES Access roads Driveways Plant nurseries Sewage disposal areas Airfields and airports Dry ditches Parking lots/areas Shelte r belts or windbreaks Alleys Firebreaks Parks Sports areas Along fences/fence lines/fencerows Fuel storage areas Paths, sidewalks, trails, or walkways Storage yards and areas Around commercial or industrial plants, structures, or outbuildings Golf courses (excluding greens, tees, aprons, fairways, and roughs) * Paved areas Substations Around farmstead and ranch structures and building foundations Gravel yards Petroleum and other tank farms Tank farms Around ornamental gardens Habitat restoration and management areas Pipeline, power, telephone, and utility rights of way Tennis courts Around ornamental trees and shrubs (including Christmas trees) Highways and roadsides (including aprons, medians, guardrails, and right of ways) Power stations Uncropped farmstead areas (barnyards, buildings, driveways, facilities, farmyards, machinery or implement yards, structures, outbuildings) Bare ground Industrial areas Preplant to turf and ornamental plants Vacant lots Barrier strips Industrial plant sites Pumping installations or pumping stations Wastelands Beaches* Landscapes Railroad rights of way Wildlife food plots site preparation* Campgrounds Lanes Ramps Wildlife habitat areas Canals Lumbe r yards Recreation areas Wildlife openings Construction sites Mulched areas Refineries Ditch banks Natural areas and brush control Resorts Drive-in theaters Parking areas Schools or educational facilities

*Not for use in California RESTRICTIONS • DO NOT apply more than 82 fl oz/A (1.50 lbs ai/A) in any single application. • DO NOT make more than 3 applications per year. • DO NOT apply sequential applications closer than 14 days apart. • DO NOT apply more than 246 fl oz/A (4.5 lbs ai/A) per year. • These restrictions are in addition to the General Use Restrictions (Non-Crop Use). • For spot applications, apply as needed for the desired weed control but DO NOT exceed the equivalent of 1.50 lbs ai/A (1.88 fl ozs per 1000 square feet) per application or 4.50 lbs ai/A (5.65 fl ozs per 1000 square feet) from applications per year.

CONSERVATION RESERVE PROGRAM (CRP) [(Not for use in California)] Not for use in California. LIFELINE Herbicide may be used when rotating out of CRP acres or to suppress competitive growth and seed production of undesirable vegetation. Refer to Weeds Controlled – Non-Crop Uses tables for list of weeds controlled.

USE PATTERN RATE/ACRE Broadcast • Undesirable vegetation management in CRP • Apply in early spring, before CRP grasses break dormancy, for selective applications with broadcast spray equipment. • After desirable perennial grasses have reached dormancy, late fall applications may be made. • Some stunting of CRP perennial grasses may occur if applications are made when plants are not dormant.

48 – 56 fl oz/A (0.88 – 1.0 lbs ai/A)

DORMANT BERMUDAGRASS (Ornamental Common and Hybrid) LIFELINE Herbicide may be used to control winter annual weeds in well-established ornamental dormant hybrid or common Bermudagrass. For best results, apply LIFELINE Herbicide after most weeds have germinated and are in an early growth stage. Applications of LIFELINE Herbicide may also be used to suppress or control target biennial or perennial weeds. Refer to Weeds Controlled – Non-Crop Uses tables for list of weeds controlled.

USE PATTERN RATE/ACRE Broadcast • Apply only when bermudagrass is fully dormant, weather is cool, and prior to spring green-up or severe turfgrass injury or delayed green-up may occur. • Avoid high volume and spot applications where spray volume exceeds 80 gallons per acre or injury or delayed green-up may occur.

56 – 82 fl oz/A (1.0 – 1.50 lbs ai/A) RESTRICTIONS • DO NOT apply more than 82 fl oz/A (1.5 lbs ai/A) in any single application. • DO NOT make more than 1 applications per year. • DO NOT apply more than 82 fl oz/A (1.5 lbs ai/A) per year. • These restrictions are in addition to the General Use Restrictions (Non-Crop Use).

USE ON WOODY SPECIES [(Not for use in California)] When applied according to the label, LIFELINE may be used to control or suppress certain perennial woody or brush weed species. Uniform, thorough spray coverage is necessary to achieve consistent weed control. LIFELINE may be applied with ammonium sulfate (AMS) at 2 - 4 lbs/A.

RESTRICTIONS • DO NOT apply more than 56 fl oz/A (1.0 lbs ai/A) in any single application. • DO NOT make more than 1 applications per year. • DO NOT apply more than 56 fl oz/A (1.0 lbs ai/A) per year. • These restrictions are in addition to the General Use Restrictions (Non-Crop Use).

USE PATTERN USE RATE Woody Species/Brush Control or Suppression • When conditions are not optimum for good spray penetration, use the higher recommended use rate. • Lower specified rates may be used when the targe species is a conifer and when vegetation growth conditions allow uniform spray coverage.

32 – 96 fl oz/A (0.59 – 1.76 lbs ai/A) Brush Controlled or Suppressed [(Not for use in California)] Blackberry Maple Salmonberr y Deer brush Multiflora rose Sweetgum Douglas fir Oak Sumac Gallberry Poison ivy/oak Thimbleberr y Hazel Pine Trumpet creeper Honeysuckle Roundleaf Vine maple Huckleberry Greenbrier Western red cedar RESTRICTIONS • DO NOT apply more than 96 fl oz/A (1.76 lbs ai/A) in a single application. • DO NOT apply more than 3 applications per year when using reduced rates. • DO NOT apply sequential applications closer than 14 days apart. • DO NOT apply more than 246 fl oz/A (4.5 lbs ai/A) per year. • These restrictions are in addition to the General Use Restrictions (Non-Crop Use).

SITE PREPARATION FOR CONIFER AND HARDWOOD PRODUCTION AREAS Prior to planting conifer and hardwood species, LIFELINE Herbicide can be used as a site preparation treatment. Refer to the Additional Non-Crop Use Sites section for use rates and application procedures. Refer to Weeds Controlled – Non- Crop Uses tables for list of weeds controlled. Restricted Entry Interval (REI) for seedling conifer and hardwood trees to be planted into the treated area: 12 hours

ADDITIONAL NON-CROP USE SITES The following table describes application direction and use rates for non-crop use sites not previously listed in the non-crop use portion of this label. Applications may be made as a broadcast, banded or spot treatment depending on the situation. Uniform, thorough spray coverage is necessary to achieve consistent weed control. LIFELINE may be applied with ammonium sulfate (AMS) at 2 – 4 lbs/A. The use of AMS can optimize control in less than ideal conditions. Refer to Weeds Controlled – Non-Crop Uses tables for list of weeds controlled.

WHERE TO APPLY TRIMMING AND EDGING LIFELINE Herbicide may be used for trimming and edging landscape areas including: around individual trees and shrubs, landscape beds, foundations, fences, driveways, paths, and parking areas; also on golf courses along cart paths, around sign and light posts, and around sand traps. For control of weeds emerging from seed, the use of LIFELINE Herbicide in a tank mix with a residual herbicide is advised. If spraying in areas adjacent to desirable plants, use a shield made of cardboard, plywood, or sheet metal while spraying to help prevent spray from contacting foliage of desirable plants.

ORNAMENTALS AND CHRISTMAS TREES When applied as advised by this label, this product may be used for the control of undesired vegetation in site preparation prior to planting, around and within shade and greenhouses, and as a directed spray around containers and field-grown established ornamentals and Christmas trees.

For pre-plant site preparation applications for control of annual and perennial weeds listed on this label, in ornamental and Christmas tree plantings, ornamental and Christmas trees may be planted into the treated area after the restricted entry interval (REI) of 12 hours has elapsed.

LIFELINE Herbicide may be used between and around containers and in site preparation for new plantings, and to control in-row weeds in field-grown wood plants. Apply LIFELINE Herbicide as a directed spray.

GREENHOUSE AND SHADE HOUSE For greenhouse and shade house applications where LIFELINE Herbicide is used to control weeds, air circulation fans must be turned off during application. Apply LIFELINE Herbicide as a directed spray, using large droplet and low-pressure t ype nozzles. Avoid drift and direct contact with desirable vegetation.

Internal

NON-CROP APPLICATION METHOD USE RATE Spot or Directed Spray Applications • Use rate depends on weed species being controlled. • Spray undesirable vegetation foliage on a spray-to-wet basis. Ensure uniform and complete coverage. Use a coarse spray. • Backpack, pump-up, and hydraulic sprayers may be used. Thoroughly clean the sprayer following use.

1 – 2 fl oz (0.02 – 0.04 lbs ai) per gallon of water Broadcast or Boom Applications • Apply in a minimum of 40 gallons of water per acre with a minimum spray pressure of 30 psi. • Use rate depends on weed species being controlled. • For smaller weeds 3 inches or less, use the lower rate. For weeds 6 inches or less use the upper end of the rate range.

48 – 72 fl oz/A (0.88 – 1.32 lbs ai/A) (Unless otherwise noted by respective non-crop use site directions for use) Aerial Applications • Apply in a minimum of 5 gallons of water per acre. • Use rate depends on weed species being controlled. For smaller weeds 3 inches or less, use the lower rate. For weeds 6 inches or less use the upper end of the rate range. 48 – 72 fl oz/A (0.88 – 1.32 lbs ai/A) (Unless otherwise noted by respective non-crop use site directions for use) • See Drift Advisory Section. • Drift control additives may be used. If a drift control additive is used, observe and follow all directions and precautions as specified on the additive label.

RESTRICTIONS • DO NOT apply directly to or allow drift to contact desirable green tissue or green, thin, or uncalloused bark of desirable vegetation of any desirable plant or vegetation or injury may result. • DO NOT apply LIFELINE Herbicide as an over-the-top broadcast spray in ornamentals and shade or Christmas trees. • DO NOT use this product in greenhouses or shade houses containing edible crops. • DO NOT apply LIFELINE herbicide as an over-the-top broadcast spray to desirable conifer or hardwood plantings. • DO NOT apply spot or directed spray applications beyond runoff. • DO NOT spray during windy conditions. • DO NOT exceed single maximum and yearly maximum broadcast use rates when applying spot or directed spray applications. • DO NOT apply more than 72 fl oz/A (1.32 lbs ai/A) in a single application unless otherwise noted in respective Non-Crop Use Site Restrictions. • DO NOT apply more than 3 applications per year unless otherwise noted in respective Non-Crop Use Site Restrictions. • DO NOT apply closer than 14 days apart. • DO NOT apply more than 216 fl oz/A (3.9 lbs ai/A) per year unless otherwise noted in respective Non-Crop Use Site Restrictions. • These restrictions are in addition to the General Use Restrictions (Non-Crop Use).

Internal WEEDS CONTROLLED – NON-CROP USES Use higher rates within the specified rate range for weed size listed when vegetation cover is dense or when weeds are growing under stressed conditions including drought or when average temperatures are below 50ºF. The addition of 8.5 to 17 pounds of ammonium sulfate (spray grade) per 100 gallons of water (1 to 2% by weight) or 2 to 4 pounds of ammonium sulfate per acre may improve the level of weed control. Refer to the appropriate Non-Crop Use Sites and Application Directions section for appropriate use rates and application directions.

Broadleaf Weeds Controlled Annual sowthistle Jimsonweed Russian thistle Bindweed Kochia Shepherds purse Buffalobur Lambsquarter, common Smartweed Burdock Leafy spurge Tansy mustard Canada thistle London rocket Velvetleaf Chickweed Malva (little mallow) Vervain Clover Mugwort Virginia copperleaf Common cocklebue Musk thistle White heath aste r Curly dock Nettle Wild buckwhea t Dandelion Nightshade Wild mustard Dogbane (hemp) Pennycress Wild onion Field gromwell Pigweed, redroot Wild rose Filaree Plantain Wild turnip Fleabane Prickly lettuce Woodsorrel Goldenrod Purslane Yellow rocket Horsetail (marestail) Ragweed

Grass and Sedge Weeds Controlled Annual bluegrass Giant foxtail Shattercane Bahiagrass Goosegrass Smallflowered Alandergrass (Signalgrass) Barley Green foxtail Smooth bromegrass Barnyardgrass Guineagrass Stinkgrass Bermudagrass Johnsongrass (rhizome) Torpedograss Carpetgrass Kentucky bluegrass Vaseygrass Crabgrass Lovegrass Wheat Cupgrass Nutsedge Wild oa t Dallisgrass Paragrass Windgrass Downy brome Quackgrass Yellow foxtail Fall panicum Ryegrass Fescue Sandbu r

PRECAUTIONS LIFELINE Herbicide is rainfast in a minimum of one-half hour and an average of 4 hours after application depending upon weed species, environmental conditions, and herbicide application rate. Plants may be safely planted into LIFELINE Herbicide treated areas after spray has dried.

Internal STORAGE AND DISPOSAL DO NOT contaminate water, food, or feed by storage or disposal. PESTICIDE STORAGE: DO NOT use or store near heat or open flame. Keep the container tightly closed and dry in a cool, well-ventilated place. Storage temperature must not exceed 125°F. If storage temperature for bulk LIFELINE Herbicide is below 32°F, the material must not be pumped until its temperature exceeds 32° F. Protect against direct sunlight. PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be disposed of on-site or at an approved waste disposal facility. CONTAINER HANDLING: [Rigid, Non-refillable plastic containers small enough to shake (i.e., with capacities equal to or less than 5gallons)] Non-refillable container. DO NOT reuse or refill this container. Triple rinse container promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Once container is rinsed, then offer for recycling if available or reconditioning if appropriate; or puncture and dispose of in a sanitary landfill, or by incineration; or, if allowed by State and local authorities, by burning. If burned, stay out of smoke. [Rigid, Non-refillable plastic containers (i.e., with capacities greater than 5 gallons)] triple rinse [or pressure rinse] as follows: Triple rinse: Empty the remaining contents into application equipment or a mix tank. Fill the container 1/4 full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container back on its end and tip it back and forth several times. Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use and disposal. Repeat this procedure two more times. Then offer for recycling or reconditioning if available, or puncture and dispose of in a sanitary landfill, or by other procedures approved by state and local authorities. DO NOT cut or weld metal containers. Pressure rinse: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after flow begins to drip. Then offer for recycling if available, or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures allowed by state and local authorities. [All refillable plastic container types (containers with capacities greater than 50 lbs)] Refillable container. Refill this container with pesticide only. DO NOT reuse this container for any other purpose. Cleaning before refilling is the responsibility of the refiller. This is a sealed returnable container to be used only for LIFELINE Herbicide. When this container is empty, it must not be opened, cleaned, or discarded. Empty containers must be returned to the original purchase location. [Bottom discharge Intermediate Bulk Plastic Container (IBC) (containers with capacities greater than 50 lbs)] Refillable container. Refill this container with pesticide only. DO NOT reuse this container for any other purpose. Cleaning before refilling is the responsibility of the refiller. Pressure rinsing the container before final disposal is the responsibility of the person disposing of the container. Empty the remaining contents from the Intermediate Bulk container (IBC) into application equipment or mix tank. Raise the bottom of the IBC by 1.5 inch on the side which is opposite of the bottom discharge valve to promote more complete product removal. Completely remove the top lid of the IBC. Use water pressurized to at least 40 PSI to rinse all interior portions. Continuously pump or drain rinsate into application equipment or rinsate collection system while pressure rinsing. Continue pressure rinsing for 2 minutes or until rinsate becomes clear. Replace the lid and close bottom valve. Contact your Ag retailer for container return, disposal, and recycling recommendations. SEED DISPOSAL: To dispose of out-of-date or otherwise unmarketable seed from plants, which have been treated with LIFELINE Herbicide, broadcast and lightly incorporate seed into field soils using disc or other suitable

Internal

IMPORTANT INFORMATION READ BEFORE USING PRODUCT CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY

NOTICE: Read the entire Directions for Use and Conditions of Sale and Limitation of Warranty and Liability before buying or using this product. If the terms are not acceptable, return the product at once, unopened, and the purchase price will be refunded. The Directions for Use of this product reflect the opinion of experts based on field use and tests, and must be followed carefully. It is impossible to eliminate all risks associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences may result because of such factors as manner of use or application, weather or crop conditions, presence of other materials or other influencing factors in the use of the product, which are beyond the control of UPL NA INC. or Seller. Handling, storage, and use of the product by Buyer or User are beyond the control of UPL NA INC. and Seller. To the extent consistent with applicable law, all such risks shall be assumed by Buyer and User, and Buyer and User agree to hold UPL NA INC. and Seller harmless for any claims relating to such factors.

TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, UPL NA INC. AND SELLER MAKE NO WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE NOR ANY OTHER EXPRESS OR IMPLIED WARRANTY EXCEPT AS STATED ON THIS LABEL.

To the extent consistent with applicable law, UPL NA INC. or Seller shall not be liable for any incidental, consequential or special damages resulting from the use or handling of this product and THE EXCLUSIVE REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY OF UPL NA INC. AND SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES (INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, SHALL BE THE RETURN OF THE PURCHASE PRICE OF THE PRODUCT OR, AT THE ELECTION OF UPL NA INC. OR SELLER, THE REPLACEMENT OF THE PRODUCT.

UPL NA INC. and Seller offer this product, and Buyer and User accept it, subject to the foregoing conditions of sale and limitations of warranty and of liability, which may not be modified except by written agreement signed by the duly authorized representative of UPL NA INC.

Lifeline and UPL logo are trademarks of UPL Corporation Limited or its related companies.

Lifeline Herbicide (PENDING) Submitted 04/01/2025, Resubmitted 02/18/2026, Resubmitted 05/08/2026

implement. Any resulting crop may be destroyed by chemical or mechanical means. Alternatively, seed may be destroyed by deep burial, incineration or landfill disposal.