justin/crop-chem-docs

Fork 0

Files

T

crop-chem-docs-refresh 492c23c9cc monthly refresh: 2026-10-01T07:24Z — bayer=91 epa_ppls=4073

2026-10-01 07:24:35 +00:00

66 KiB

Raw Blame History

A146.01

EPA Reg No: 91234-243
Registrant: ATTICUS, LLC
Signal word: Caution
Active ingredients: Deltamethrin (4.75%)
Label accepted: 2026-09-29
Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/091234-00243-20260929.pdf

September 29, 2026 Kayla Ward [email protected] ATTICUS, LLC Subject: Non-PRIA (Pesticide Registration Improvement Act) Labeling Amendment - Updating Directions For Use to improve clarity. Product Name: A146.01 Admin Number: 91234-243 EPA Receipt Date: 06/04/2026 Action Case Number: 00700649 Dear Kayla Ward: The amended labeling referred to above, submitted in connection with registration under the Federal Insecticide, Fungicide, and Rodenticide Act, as amended, is acceptable. This approval does not affect any terms or conditions that were previously imposed on this registration. You continue to be subject to existing terms or conditions on your registration and any deadlines connected with them. A stamped copy of your labeling is enclosed for your records. This labeling supersedes all previously accepted labeling. You must submit one (1) copy of the final printed labeling before you release this product for shipment with the new labeling. In accordance with 40 CFR § 152.130(c), you may distribute or sell this product under the previously approved labeling for 18 months from the date of this letter. After 18 months, you may only distribute or sell this product if it bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR § 152.3. The label submitted with the application has been stamped "Accepted Only Indicated Revisions Reviewed" and is enclosed for your records. Should you wish to add/retain a reference to your company’s website on your label, then please be aware that the website becomes labeling under FIFRA and is subject to review by EPA. If the website is false or misleading, the product will be considered to be misbranded and sale or distribution of the product is unlawful under FIFRA section 12(a)(1)(E). 40 CFR § 156.10(a)(5) lists examples of statements the EPA may consider false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims made on the website may not substantially differ from those claims approved through the registration process. Therefore, should the EPA find or if it is brought to our attention that a website contains statements or claims substantially differing from statements or claims made in connection with obtaining a FIFRA section 3 registration, the website will be referred to the EPA’s Office of Enforcement and Compliance Assurance. Your release for shipment of this product constitutes acceptance of these terms. If these terms are not complied with, this registration will be subject to cancellation in accordance with FIFRA section 6.

If you have questions, please contact Laura Rademacher via email at [email protected]. Sincerely, Signing Authority Name, Signing Authority Title IVB1, RD Office of Pesticide Programs

[Note to reviewer: [Text] in brackets denotes optional or explanatory language [Note to reviewer: {Text} in braces denotes where in the final label text will appear {BOOKLET FRONT PANEL LANGUAGE}

A146.01 [™] [Alternate Brand Name: Adjourn™ SC] [Provides Control of Listed Insect/Pests in and around the Home] [For Insect Control on Commercial and Residential Turf and Landscape Ornamental Plants] [For crack and crevice and spot applications in homes, hotels, schools and food handling establishments.] [Controls ants, bedbugs, cockroaches, fleas, flies, silverfish, spiders and many other listed pests.] [Mattress application for bedbugs and lice.] [Broadcast spray for lawns and turfgrass to control fleas, ticks and other listed insects.] [Concentrated suspension of micro-crystals] [Residual control that lasts for up to 90 days] [For use on Paints, Plastics, Fabrics and other surfaces] [Kills crawling and flying insects when exposed to treated surfaces.] [Protects Stored Grains and seeds against damage from Indian Meal Moth, Saw-Toothed Grain Beetle, Red Flour Beetle, Rice Weevil, Maize Weevil, and many other listed pests.] [For both indoor and outdoor uses] [Agitate Well]

ACTIVE INGREDIENT: (% by weight) Deltamethrin.………………………………………….……………………………………………………………………………..………………………..4.75% OTHER INGREDIENTS: ……………………………………………………………………………………………………………………………………95.25% TOTAL …………………………………………………………………………………………………………………………………………………………….100.0% Contains 0.42 lb. of deltamethrin per gallon.

KEEP OUT OF REACH OF CHILDREN CAUTION

Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you DO NOT understand the label, find someone to explain it to you in detail.)

See [below] [inside label booklet] for [additional] [First Aid,] [and] [Precautionary Statements] [and] [Directions for Use].

EPA Reg. No.: 91234-243 EPA Est. No.: Net Contents:

Manufactured For: Atticus, LLC 940 NW Cary Parkway, Suite 200 Cary, NC 27513 DELTAMETHRIN GROUP 3A INSECTICIDE [A146.01] is not manufactured, or distributed by Bayer Environmental Science, seller of Suspend®. [Contains deltamethrin, the active ingredient used in Suspend® SC]. 91234-243 09/29/2026

{LANGUAGE INSIDE BOOKLET}

FIRST AID If inhaled: x Move person to fresh air. x If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably by mouth-to-mouth, it possible. x Call a poison control center or doctor for further treatment advice. HOT LINE NUMBER Have the product container or label with you when calling a poison control center or doctor, or going for treatment. You may also contact 1-800-424-9300 for emergency medical treatment information.

For Chemical Emergency Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night Within USA and Canada: 1-800-424-9300 or +1 703-527-3887 (collect calls accepted)

PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS & DOMESTIC ANIMALS CAUTION Harmful if inhaled. Avoid breathing vapor or spray mist. Contact with product may result in transient tingling and reddening of the skin. Remove contaminated clothing and wash before reuse.

Environmental Hazards: This product is extremely toxic to fresh water and estuarine fish and invertebrates. To protect the environment, DO NOT allow pesticide to enter or run-off into storm drains, drainage ditches, gutters or surface waters. Applying this product in calm weather when rain is not predicted for the next 24 hours will help to ensure that wind or rain does not blow or wash pesticide off the treatment area. Rinsing application equipment over the treated area will help avoid run-off to water bodies or drainage systems.

This pesticide is highly toxic to bees exposed to direct treatment. DO NOT apply or allow it to drift to crops or weeds on which bees are foraging the treatment area. DO NOT apply directly to water, to areas where surface water is present or to intertidal areas below the mean high water mark. DO NOT contaminate water when disposing of equipment wash-waters or rinsate.

Physical and Chemical Hazards: DO NOT use water-based sprays of A146.01 in conduits, motor housings, junction boxes, switch boxes, or other electrical equipment because of possible shock hazard.

DIRECTIONS FOR USE It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.

Not for use on turf being grown for sale or other commercial use as sod, or for commercial seed production, or for research purposes. For both indoor and outdoor uses.

Product Information: A146.01 is a suspension concentrate insecticide for use both indoors and outdoors for effective knockdown and long residual control of listed pests. Apply in and around buildings and structures, and on established landscape ornamentals around [residential and] commercial properties.

Opening Instructions: CLOSE TIGHTLY --- WHILE PUSHING DOWN TURN

Restrictions: x Do not allow to enter indoor or outdoor drains. No permita la entrada a desagües internos o externos. x Follow proper disposal procedures on this label. Siga las indicaciones del etiquetado para el desecho apropiado del producto. x Do not spray the product into fish pools, ponds, streams, or lakes. Do not apply directly to sewers or storm drains, or to any area like a drain or gutter where drainage to sewers, storm drains, water bodies, or aquatic habitat can occur. x Do not allow the product to enter any drain during or after application. x Do not apply directly to impervious horizontal surfaces such as sidewalks, driveways, and patios except as a spot or crack-and-crevice treatment. x Do not apply or irrigate to the point of runoff. x Do not make applications during rain. Avoid making applications when rainfall is expected before the product has sufficient time to dry (minimum 4 hours). x Rainfall within 24 hours after application may cause unintended runoff of pesticide application .

Spot Treatments: Spot treatments must not exceed two square feet in size (for example, 2 ft. by 1 ft. or 4 ft. by 0.5 ft.).

Crack and Crevice Treatments: Treat surfaces to ensure thorough coverage but avoid runoff. x To treat insects harbored in voids and cracks-and-crevices, applications must be made in such a manner to limit dripping and avoid runoff onto untreated structural surfaces and plants.

Soil or Foliar Applications: For soil or foliar applications, do not apply by ground within 25 feet of lakes, reservoirs, rives, permanent streams, marshes or natural ponds, estuaries and commercial fish farm ponds.

x DO NOT apply when the wind speed is greater than 15 mph. x DO NOT apply directly to water. x DO NOT contaminate water when disposing of equipment washwaters or rinsate.

Dilution Rates AI Concentration A146.01 diluted to One Gallon of Water When to Use 0.01% 0.25 fl. oz. (7.5 mL) Use this rate for maintenance treatments. 0.03% 0.75 fl. oz. (22.7 mL) Use this rate for initial treatment or clean-out treatments. 0.06% 1.5 fl. oz. (45.4 mL) Use this rate for severe pest infestations or when longer control is desired.

Mixing Instructions: Mix A146.01 with water and apply using a hand pressurized or power operated sprayer, such as Actisol or similar equipment. For outdoor broadcast application, apply as a coarse spray or with conventional hydraulic boom-type sprayer or other suitable equipment. Shake container well before using.

Dilution Instructions: x Add half the water to the spray tank; x Add A146.01 as specified in the appropriate application rates table; x Agitate well; x Add the remaining water slowly to avoid excess foam; x Thoroughly agitate the sprayer before using to insure proper suspension. Note: If spraying is stopped when using a back-pack or hand-held spray equipment, reinvert sprayer before use. If spray screens are used, they must be 50 mesh or larger. Dilute A146.01 only with water. Only prepare the spray solution when ready to make applications.

Tank Mixing: Tank mix A146.01 with other currently registered pesticides unless prohibited by the product label. To check for product compatibility, a small volume mixing test with other products is recommended. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involv ed in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.

To check for compatibility with A146.01, mix a small test sample of the products in the correct proportions with water in a quart jar. The use of silicone surfactants in tank mixtures with A146.01 may enhance the control of some insects.

Treatments may be made at 21-day intervals to maintain adequate control.

PEST CONTROL INDOORS A146.01 may be applied in and around residential and non-residential buildings including residential kitchens and food/feed handling establishments: schools, factories, warehouses, hospitals, food processing facilities (food/feed and non-food/non-feed areas), and modes of transportation.

Mix A146.01 with water and apply indoors as a crack and crevice application, spot or general surface treatment, or void (spray, mist, foam) injections with hand pressurized or power operated sprayers or other suitable equipment.

For residential buildings and structures - apply only as a crack and crevice or spot treatment.

Pests Controlled Ants Bed bugs Bird mites Blue/green bottle flies Boxelder bugs Carpet beetles Centipedes Clothes moths Clover mites Cockroaches Crickets Darkling beetles Dermestids Earwigs Elm leaf beetles Firebrats Fleas Flesh flies Flies Fruit flies Gnats Hide beetles Hornets House flies Leather beetles Midges Millipedes Moths Multi-colored Asian lady beetles Pantry pests, beetles & moths Phorid flies Pillbugs Sciarid flies (fungus gnats) Scorpions Silverfish Sowbugs Spiders Ticks Wasps Yellow jackets

Approved use sites include the food/feed and non-food/non-feed areas of:

Aircraft (cargo only) Apartment buildings Bakeries Bottling facilities Breweries Buses Cafeterias Candy plants Canneries Dairy product processing plants Food manufacturing plants Food processing plants Food service establishments Granaries & grain mills Hospitals Hotels Houses Industrial buildings Installations Kitchens Laboratories Mausoleums Meat, poultry & egg processing & packaging plants Mobile & motor homes Nursing homes Offices Railcars Restaurants Schools Ships & vessels Trailers Trucks Warehouses Wineries

Where to Apply: This product can be applied to walls, floors, ceilings, in and around cabinets, between, behind and beneath equipment and appliances, around floor drains, window and door frames and around plumbing, sinks and other possible pest harborage sites.

Treat where pests have been seen or found, or can find shelter. Treat areas where pests normally feed or hide, such as baseboards, corners, around water pipes, behind and under refrigerators, cabinets, sinks and stoves.

Treat entry points around water pipes, utility penetrations, windows, doors, vents, and eaves.

Void applications can be made behind veneers, piers, and chimney bases, into rubble foundations, into block voids and structural voids, wall voids, under slabs, stoops, porches or to the soil in crawlspaces, and other similar voids.

Spot treat floors, floor coverings, carpets, or rugs for flea and tick control; DO NOT treat entire floor area.

Use Rates: x For a 0.01% a.i. concentrate, use 0.25 fl. oz. A146.01 (7.5 mL) per gallon of water x For a 0.03% a.i. concentration, use 0.75 fl. oz. of A146.01 (22.7 mL) per gallon of water. x For a 0.06% a.i. concentration, use 1.50 fl. oz. of A146.01 (45.4 mL) per gallon of water.

How to Apply: Spot Treatment: Apply A146.01 using a low pressure system (DO NOT exceed 50 psi at nozzle) with a fan-type nozzle to uniformly apply spot treatments in and around cupboards, and between, beneath and behind equipment or appliances.

In the home, all food processing surfaces and utensils must be covered before treatment or thoroughly washed following treatment. Cover exposed food or remove from area being treated.

Spray, Mist or Foam, Crack and Crevice, or Void Applications: Apply A146.01 spray, mist or foam directly into cracks and crevice or voids where pests or their nests are found. x Spray: Apply A146.01 Spray Mixture to cracks and crevices in and around baseboards, floors, walls, appliances, areas around water and sewer pipes, and other voids with a low pressure system ( DO NOT exceed 50 psi at nozzle tip) using a pinpoint or variable pattern nozzle. x Mist: Use appropriate mist generating equipment. DO NOT allow mist to drift out of void spaces into commonly occupied areas of structure. x Foam: Use foam to treat structural voids and control pests in walls, under slabs, or other void areas. Using appropriate foam generating equipment, mix dilution with manufacturer’s specified volume of foaming agent and apply sufficient volume of foam.

When to Apply: Apply when pests are seen or found. Treat areas that insects inhabit or where they are normally found. Use 0.25 to 1.5 fluid ounces of A146.01 per gallon of water and apply to adequately cover 1000 square feet. Under conditions of severe pest infestation, when quick knockdown and/or longer residual control is desired, use 1.5 ounces of 0.06% A146.01 per 1,000 sq. ft.

Treatments may be made at 21-day intervals to maintain adequate control.

Restrictions: x DO NOT apply broadcast treatments to floors or floor coverings. x DO NOT apply as a space spray. x Remove or tightly cover fish tanks and disconnect aerators during application. x Keep people and pets away from sites of application until treated area has dried.

Application for Indoor Pests Pests Use Instructions Cockroaches, Ants, Crickets, Silverfish, Firebrats, Centipedes, Millipedes, Clothes Moths, Earwigs, Pillbugs, Sowbugs, Scorpions and Spiders Apply as a coarse low pressure (DO NOT exceed 50 psi at nozzle tip) spot or crack and crevice spray to areas where these pests are found. Pay particular attention to dark corners of rooms and closets; floor drains; cracks and crevices in walls; along and behind baseboards; beneath and behind sinks, stoves, refrigerators, and cabinets; around plumbing and other utility installations; doors, windows, and attics and crawl spaces. Spot applications may be made to floor surfaces along baseboards and around air ducts. Let surfaces dry before allowing people or pets to contact surfaces. Pantry Pests To kill adult and accessible immature stages of insects such as lesser grain borers, grain weevils, flour beetles, saw-toothed grain beetles, cigarette beetles, merchant grain beetles, Angoumois grain moths, Mediterranean flour moths, Indian meal moths, grain mites and spider mites: Make applications to cupboards, shelving and storage areas. Remove all foodstuffs, all utensils, shelf paper, and other objects before spraying. Allow all treated surfaces to dry before replacing foodstuffs, utensils or other items. Any foodstuff accidentally contaminated with any spray solution must be discarded. Crawling and Flying Insect Pests: Flies, Gnats, Midges, Mosquitoes, Cockroaches, Ants, and Silverfish Apply directly to walls, ceilings, window screens and other resting areas as a residual surface treatment. May be used inside residential buildings, as well as in and around carports, garages, storage sheds, unoccupied barns, stables, or pet kennels. Ants, including Pharaoh’s ant Apply to trails, around doors and windows and other areas where ants inhabit or enter premises. Bed Bugs and Lice Spray bed bugs and eggs directly wherever possible following site directions below. For infested mattresses, remove linens and wash before reuse. Apply

to mattresses, especially tufts, folds, and edges until moist. Allow to dry before remaking bed. Apply to bedsprings, box springs, and the interior of bed frames or headboards, including all cracks and crevices. When bed bugs are found in upholstered furniture, apply only to the infested tufts, seams, folds and edges, but DO NOT make broadcast applications to flat surfaces where prolonged human contact will occur. If bugs heavily infest furniture (inside cushions and/or batting) apply a labeled insecticide dust or consider fumigation. Apply as a crack and crevice treatment to all baseboards, moldings, beneath floor coverings and carpets, closets, shelves, curtains, furniture and picture frames that may provide harborage to bed bugs. Carpet Beetles, Fleas and Ticks A to tal integrated pest management program is recommended. Thoroughly vacuum infested areas prior to treatment. These areas include all carpet, upholstered furniture, baseboards, and other indoor areas frequented by pets. The vacuum cleaner bag should be discarded in an outdoor trash container upon completion. Pet bedding should be cleaned or replaced. Apply this product as a uniform, coarse low-pressure (DO NOT exceed 50 psi at nozzle tip) spot or crack and crevice treatment to areas where these pests normally inhabit. Take care to limit spot treatments to pet bedding and its surrounding area, infested floor coverings and pest habitats. DO NOT treat entire area of floor, carpet or floor coverings. When these pests are found in upholstered furniture, apply only to the infested tufts, seams, folds and edges, but DO NOT make broadcast applications to flat surfaces where prolonged human contact will occur. This product can also be applied out-of-doors for flea and tick control (see directions in Outdoor/Perimeter Pests Section). A146.01 can be used with an Insect Growth Regulator (IGR). For effective control of fleas, treatment directly to the pet with an EPA registered product for such use, as well as treating outside areas pets frequent may be required. DO NOT treat pets with this product.

Continued Pet Kennels For residual control of crawling and flying insects in and around these structures, apply as a general surface and/or crack and crevice spray. Optimal control results if facilities to be treated are clean and if the exterior perimeter is concurrently treated with this product. Apply only to areas of facility where animals are not present. Allow spray to dry before allowing re-entry of animals into treated areas. DO NOT apply to animal feed or watering equipment. DO NOT treat pets with this product. Limit spot treatment to pet beds and infested floor coverings.

FOOD/FEED HANDLING ESTABLISHMENTS Applications are permitted in food/feed and non-food/non-feed areas of food/feed handling and processing establishments as a general surface, spot or crack and crevice treatment to control of labeled pests.

Food/Feed handling establishments are defined as places other than private residences in which exposed food/feed is held, processed, prepared or served. Included also are areas for receiving, storing, packing (canning, bottling, wrapping, boxing), preparing, edible waste storage and enclos ed processing systems (mills, dairies, edible oils, syrups) of food/feed. Serving areas where food/feed is exposed and the facility is in operation are also considered food/feed areas.

Non-Food/Non-Feed Areas: garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, mop closets and storage (after packaging, canning or bottling). Treat any area that insects are observed in or where insects may enter.

General Surface Applications: Before application cover or remove all food/feed processing and/or handling equipment. After application, wash all equipment, benches, shelving and other surfaces that food/feed will contact in food/feed processing plants, cafeterias and similar facilities. Clean food/feed handling or processing equipment and rinse well with clean, fresh water. After application in bakeries, clean all food contact surfaces thoroughly with appropriate equipment.

Restrictions: x DO NOT use this application method in the food/feed hand ling areas of the facility when the facility is in operation or foods/feeds are exposed. x DO NOT apply to food/feed products.

Spot or Crack & Crevice Applications: Except in federally inspected meat and poultry plants, spot or crack and crevice applications may be made while the facility is in operation provided exposed food is covered or removed from area being treated prior to application.

Restrictions: x Application is prohibited in Federally inspected meat and poultry plants while such facility is in operation. x DO NOT apply to food or food-handling surfaces. x In the home, DO NOT allow spray to contact food/feed surfaces. If it does, clean surfaces with soap and water.

PEST CONTROL OUTDOORS Apply A146.01 as a perimeter treatment, residual spray or broadcast application to surfaces of buildings, lawns, grounds and ornamental plantings.

Pests Controlled Ants Blue or green bottle flies Boxelder bugs Brown marmorated stinkbug Carpenter ants Centipedes Cockroaches Cluster flies Clover mites Crickets Earwigs Elm leaf beetles Fire ants Firebrats Fleas

Flesh flies Flies Gnats Ground beetles Hornets House flies Midges

Millipedes Mosquitoes Moths Multi-colored Asian lady beetle Pillbugs Scorpions Silverfish Sowbugs Spiders Springtails Stable flies Ticks Wasps Yellow jackets

Where to Apply: Apply as a perimeter treatment or residual spray around [residential and] non-residential settings. Treatments should begin at the first sighting of pests.

Residual Spray: Apply A146.01 to surfaces on building exteriors, porches and patios (as spot/crack and crevice applications only), and other structures, around door and windows, eaves and attic vents, utility entry points, soffit areas and other exterior openings (foundation cracks or drilled holes) where pests enter the structure or where they have been seen or found, or can find shelter.

Perimeter Treatments: For best results, apply A146.01 to areas where pests are seen and may find entrance. Treat the outside of the structure, including walls (to a height of 2 feet), around door and window frames, and soffits where pests are active or may enter or hide. Treat the soil, turf, or other ground covering adjacent to the structure (7 feet or less from the base of a man-made structure to pervious surfaces) where pests are seen, have been found, or can find shelter. In ant management programs, apply to flower, shrub or ornamental plant beds where ants may be nesting, find food or forage.

Restrictions:

DO NOT water the treated area to the point of run-off
DO NOT make applications during rain.
DO NOT apply directly to impervious horizontal surfaces such as sidewalks, driveways, and patios except as a spot or crack and crevice treatment. During application, DO NOT allow pesticide to enter or run-off into storm drains, drainage ditches, gutters, or surface waters.
All outdoor spray applications must be limited to spot or crack-and-crevice treatments only, except for the following permitted uses: a) Application to pervious surfaces such as soil, lawn, turf, and other vegetation; b) Perimeter band treatments of 7 feet wide or less from the base of a man-made structure to pervious surfaces (e.g., soil, mulch, or lawn); c) Applications to underside of eaves, soffits, doors, or windows permanently protected from rainfall by a covering, overhang, awning, or other structure; d) Applications around potential exterior pest entry points into man-made structures such as doorways and windows, when limited to a band not to exceed one inch; e) Applications to vertical surfaces (such as the side of a man-made structure) directly above impervious surfaces (e.g., driveways, sidewalks, etc.) up to 2 feet above ground level; f) Applications to vertical surfaces directly above pervious surfaces, such as soil, lawn turf, mulch, or other vegetation) only if the pervious surface does not drain into ditches storm drains, gutters, or surface waters.” g) “Do not apply when the wind speed is greater than 15 mph.

Use Rates: x For a 0.01% dilution, use 0.25 fl. oz. A146.01 (7.5 mL) per gallon of water x For a 0.03% dilution, use 0.75 fl. oz. of A146.01 (22.7 mL) per gallon of water. x For a 0.06% dilution, use 1.50 fl. oz. of A146.01 (45.4 mL) per gallon of water.

How to Apply: Apply as a coarse low pressure (DO NOT exceed 50 psi at nozzle tip) spray at the rate of 0.25 to 1.5 fluid ounces of this product per 1,000 square feet of surface. Apply in a sufficient volume of water to provide adequate coverage but DO NOT allow run-off to occur.

High volume applications using power sprayers: You must adjust the rate of product dilution to ensure the correct amount of the product (see Use Rate section above) is applied per 1,000 square feet of treated surface. For example, mixing 12.5 fluid ounces of this product in a 50 gallon tank, while using an application volume of 3.0 gallons per 1,000 square feet, will apply 0.75 fluid ounces of this product per 1,000 square feet. The table below gives examples of end use dilutions for typical power spraying application volumes.

DILUTION RATE CHART Amount of Product Application Volume Gallons of Water Concentration (%AI) In Spray Solution Fluid Ounces Milliliter 0.25 7.5 1 2 3 4 5 0.01% 0.005% 0.0033% 0.0025% 0.002% 0.75 22.7 1 2 3 4 5 0.03% 0.015% 0.01% 0.0075% 0.006% 1.5 45.4 1 2 3 4 5 0.06% 0.03% 0.02% 0.015% 0.012%

MIXING DIRECTIONS FOR A146.01 -OUTDOOR PERIMETER APPLICATION I. A146.01 DILUTION (0.25 oz. /1000 sq. ft.) - (Based on one [home][or][structure] being 1,000 sq. ft.) Tank Size 15 Gallon 25 Gallon 50 Gallon 100 Gallon Finished Spray: Gallons Per 1000 sq. ft

A146.01 Per Tank (fI. oz.)