Files
crop-chem-docs/corpus/epa_ppls/91234-243.md
T

1483 lines
66 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# A146.01
- EPA Reg No: **91234-243**
- Registrant: ATTICUS, LLC
- Signal word: Caution
- Active ingredients: Deltamethrin (4.75%)
- Label accepted: 2026-09-29
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/091234-00243-20260929.pdf
---
September 29, 2026
Kayla Ward
kayla.ward@atticusllc.com
ATTICUS, LLC
Subject: Non-PRIA (Pesticide Registration Improvement Act) Labeling Amendment - Updating
Directions For Use to improve clarity.
Product Name: A146.01
Admin Number: 91234-243
EPA Receipt Date: 06/04/2026
Action Case Number: 00700649
Dear Kayla Ward:
The amended labeling referred to above, submitted in connection with registration under the Federal
Insecticide, Fungicide, and Rodenticide Act, as amended, is acceptable.
This approval does not affect any terms or conditions that were previously imposed on this registration. You
continue to be subject to existing terms or conditions on your registration and any deadlines connected with
them.
A stamped copy of your labeling is enclosed for your records. This labeling supersedes all previously
accepted labeling. You must submit one (1) copy of the final printed labeling before you release this product
for shipment with the new labeling. In accordance with 40 CFR § 152.130(c), you may distribute or sell this
product under the previously approved labeling for 18 months from the date of this letter. After 18 months, you
may only distribute or sell this product if it bears this new revised labeling or subsequently approved labeling.
“To distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR § 152.3.
The label submitted with the application has been stamped "Accepted Only Indicated Revisions Reviewed"
and is enclosed for your records.
Should you wish to add/retain a reference to your company’s website on your label, then please be aware that
the website becomes labeling under FIFRA and is subject to review by EPA. If the website is false or
misleading, the product will be considered to be misbranded and sale or distribution of the product is unlawful
under FIFRA section 12(a)(1)(E). 40 CFR § 156.10(a)(5) lists examples of statements the EPA may consider
false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims
made on the website may not substantially differ from those claims approved through the registration process.
Therefore, should the EPA find or if it is brought to our attention that a website contains statements or claims
substantially differing from statements or claims made in connection with obtaining a FIFRA section 3
registration, the website will be referred to the EPA’s Office of Enforcement and Compliance Assurance.
Your release for shipment of this product constitutes acceptance of these terms. If these terms are not
complied with, this registration will be subject to cancellation in accordance with FIFRA section 6.
If you have questions, please contact Laura Rademacher via email at rademacher.laura@epa.gov.
Sincerely,
Signing Authority Name, Signing Authority Title
IVB1, RD
Office of Pesticide Programs
1
[Note to reviewer: [Text] in brackets denotes optional or explanatory language
[Note to reviewer: {Text} in braces denotes where in the final label text will appear
{BOOKLET FRONT PANEL LANGUAGE}
A146.01 [™]
[Alternate Brand Name: Adjourn™ SC]
[Provides Control of Listed Insect/Pests in and around the Home]
[For Insect Control on Commercial and Residential Turf and Landscape Ornamental Plants]
[For crack and crevice and spot applications in homes, hotels, schools and food handling establishments.]
[Controls ants, bedbugs, cockroaches, fleas, flies, silverfish, spiders and many other listed pests.]
[Mattress application for bedbugs and lice.]
[Broadcast spray for lawns and turfgrass to control fleas, ticks and other listed insects.]
[Concentrated suspension of micro-crystals]
[Residual control that lasts for up to 90 days]
[For use on Paints, Plastics, Fabrics and other surfaces]
[Kills crawling and flying insects when exposed to treated surfaces.]
[Protects Stored Grains and seeds against damage from Indian Meal Moth, Saw-Toothed Grain Beetle, Red Flour Beetle, Rice
Weevil, Maize Weevil, and many other listed pests.] [For both indoor and outdoor uses]
[Agitate Well]
ACTIVE INGREDIENT: (% by weight)
Deltamethrin.………………………………………….……………………………………………………………………………..………………………..4.75%
OTHER INGREDIENTS: ……………………………………………………………………………………………………………………………………95.25%
TOTAL …………………………………………………………………………………………………………………………………………………………….100.0%
Contains 0.42 lb. of deltamethrin per gallon.
KEEP OUT OF REACH OF CHILDREN
CAUTION
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you DO NOT
understand the label, find someone to explain it to you in detail.)
See [below] [inside label booklet] for [additional] [First Aid,] [and] [Precautionary Statements] [and] [Directions for
Use].
EPA Reg. No.: 91234-243
EPA Est. No.:
Net Contents:
Manufactured For:
Atticus, LLC
940 NW Cary Parkway, Suite 200
Cary, NC 27513
DELTAMETHRIN GROUP 3A INSECTICIDE
[A146.01] is not manufactured, or distributed by Bayer Environmental Science, seller of Suspend®.
[Contains deltamethrin, the active ingredient used in Suspend® SC].
91234-243
09/29/2026
2
{LANGUAGE INSIDE BOOKLET}
FIRST AID
If inhaled: x Move person to fresh air.
x If person is not breathing, call 911 or an ambulance, then give artificial respiration,
preferably by mouth-to-mouth, it possible.
x Call a poison control center or doctor for further treatment advice.
HOT LINE NUMBER
Have the product container or label with you when calling a poison control center or doctor, or going
for treatment. You may also contact 1-800-424-9300 for emergency medical treatment information.
For Chemical Emergency
Spill, Leak, Fire, Exposure, or Accident
Call CHEMTREC Day or Night
Within USA and Canada: 1-800-424-9300 or +1 703-527-3887 (collect calls accepted)
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS & DOMESTIC ANIMALS
CAUTION
Harmful if inhaled. Avoid breathing vapor or spray mist. Contact with product may result in transient tingling and
reddening of the skin. Remove contaminated clothing and wash before reuse.
Environmental Hazards:
This product is extremely toxic to fresh water and estuarine fish and invertebrates. To protect the environment, DO
NOT allow pesticide to enter or run-off into storm drains, drainage ditches, gutters or surface waters. Applying this
product in calm weather when rain is not predicted for the next 24 hours will help to ensure that wind or rain does
not blow or wash pesticide off the treatment area. Rinsing application equipment over the treated area will help
avoid run-off to water bodies or drainage systems.
This pesticide is highly toxic to bees exposed to direct treatment. DO NOT apply or allow it to drift to crops or weeds
on which bees are foraging the treatment area. DO NOT apply directly to water, to areas where surface water is
present or to intertidal areas below the mean high water mark. DO NOT contaminate water when disposing of
equipment wash-waters or rinsate.
Physical and Chemical Hazards:
DO NOT use water-based sprays of A146.01 in conduits, motor housings, junction boxes, switch boxes, or other
electrical equipment because of possible shock hazard.
DIRECTIONS FOR USE
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.
Not for use on turf being grown for sale or other commercial use as sod, or for commercial seed production, or for
research purposes. For both indoor and outdoor uses.
Product Information:
A146.01 is a suspension concentrate insecticide for use both indoors and outdoors for effective knockdown and long
residual control of listed pests. Apply in and around buildings and structures, and on established landscape ornamentals
around [residential and] commercial properties.
Opening Instructions: CLOSE TIGHTLY --- WHILE PUSHING DOWN TURN
3
Restrictions:
x Do not allow to enter indoor or outdoor drains.
No permita la entrada a desagües internos o externos.
x Follow proper disposal procedures on this label.
Siga las indicaciones del etiquetado para el desecho apropiado del producto.
x Do not spray the product into fish pools, ponds, streams, or lakes. Do not apply directly to sewers or storm
drains, or to any area like a drain or gutter where drainage to sewers, storm drains, water bodies, or aquatic
habitat can occur.
x Do not allow the product to enter any drain during or after application.
x Do not apply directly to impervious horizontal surfaces such as sidewalks, driveways, and patios except as a
spot or crack-and-crevice treatment.
x Do not apply or irrigate to the point of runoff.
x Do not make applications during rain. Avoid making applications when rainfall is expected before the
product has sufficient time to dry (minimum 4 hours).
x Rainfall within 24 hours after application may cause unintended runoff of pesticide application .
Spot Treatments:
Spot treatments must not exceed two square feet in size (for example, 2 ft. by 1 ft. or 4 ft. by 0.5 ft.).
Crack and Crevice Treatments:
Treat surfaces to ensure thorough coverage but avoid runoff.
x To treat insects harbored in voids and cracks-and-crevices, applications must be made in such a manner to
limit dripping and avoid runoff onto untreated structural surfaces and plants.
Soil or Foliar Applications:
For soil or foliar applications, do not apply by ground within 25 feet of lakes, reservoirs, rives, permanent streams,
marshes or natural ponds, estuaries and commercial fish farm ponds.
x DO NOT apply when the wind speed is greater than 15 mph.
x DO NOT apply directly to water.
x DO NOT contaminate water when disposing of equipment washwaters or rinsate.
Dilution Rates
AI Concentration A146.01 diluted to One Gallon of Water When to Use
0.01% 0.25 fl. oz. (7.5 mL) Use this rate for maintenance treatments.
0.03% 0.75 fl. oz. (22.7 mL) Use this rate for initial treatment or clean-out
treatments.
0.06% 1.5 fl. oz. (45.4 mL) Use this rate for severe pest infestations or when
longer control is desired.
Mixing Instructions:
Mix A146.01 with water and apply using a hand pressurized or power operated sprayer, such as Actisol or similar
equipment. For outdoor broadcast application, apply as a coarse spray or with conventional hydraulic boom-type
sprayer or other suitable equipment. Shake container well before using.
4
Dilution Instructions:
x Add half the water to the spray tank;
x Add A146.01 as specified in the appropriate application rates table;
x Agitate well;
x Add the remaining water slowly to avoid excess foam;
x Thoroughly agitate the sprayer before using to insure proper suspension.
Note: If spraying is stopped when using a back-pack or hand-held spray equipment, reinvert sprayer before use. If
spray screens are used, they must be 50 mesh or larger. Dilute A146.01 only with water. Only prepare the spray
solution when ready to make applications.
Tank Mixing:
Tank mix A146.01 with other currently registered pesticides unless prohibited by the product label. To check for product
compatibility, a small volume mixing test with other products is recommended. It is the pesticide user’s responsibility
to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and
limitations and directions for use on all product labels involv ed in tank mixing. Users must follow the most restrictive
directions for use and precautionary statements of each product in the tank mixture.
To check for compatibility with A146.01, mix a small test sample of the products in the correct proportions with water
in a quart jar. The use of silicone surfactants in tank mixtures with A146.01 may enhance the control of some insects.
Treatments may be made at 21-day intervals to maintain adequate control.
PEST CONTROL INDOORS
A146.01 may be applied in and around residential and non-residential buildings including residential kitchens and
food/feed handling establishments: schools, factories, warehouses, hospitals, food processing facilities (food/feed
and non-food/non-feed areas), and modes of transportation.
Mix A146.01 with water and apply indoors as a crack and crevice application, spot or general surface treatment, or
void (spray, mist, foam) injections with hand pressurized or power operated sprayers or other suitable equipment.
For residential buildings and structures - apply only as a crack and crevice or spot treatment.
Pests Controlled
Ants
Bed bugs
Bird mites
Blue/green bottle flies
Boxelder bugs
Carpet beetles
Centipedes
Clothes moths
Clover mites
Cockroaches
Crickets
Darkling beetles
Dermestids
Earwigs
Elm leaf beetles
Firebrats
Fleas
Flesh flies
Flies
Fruit flies
Gnats
Hide beetles
Hornets
House flies
Leather beetles
Midges
Millipedes
Moths
Multi-colored
Asian lady beetles
Pantry pests,
beetles & moths
Phorid flies
Pillbugs
Sciarid flies
(fungus gnats)
Scorpions
Silverfish
Sowbugs
Spiders
Ticks
Wasps
Yellow jackets
5
Approved use sites include the food/feed and non-food/non-feed areas of:
Aircraft (cargo only)
Apartment buildings
Bakeries
Bottling facilities
Breweries
Buses
Cafeterias
Candy plants
Canneries
Dairy product processing plants
Food manufacturing plants
Food processing plants
Food service establishments
Granaries & grain mills
Hospitals
Hotels
Houses
Industrial buildings
Installations
Kitchens
Laboratories
Mausoleums
Meat, poultry & egg processing & packaging plants
Mobile & motor homes
Nursing homes
Offices
Railcars
Restaurants
Schools
Ships & vessels
Trailers
Trucks
Warehouses
Wineries
Where to Apply:
This product can be applied to walls, floors, ceilings, in and around cabinets, between, behind and beneath
equipment and appliances, around floor drains, window and door frames and around plumbing, sinks and other
possible pest harborage sites.
Treat where pests have been seen or found, or can find shelter. Treat areas where pests normally feed or hide, such
as baseboards, corners, around water pipes, behind and under refrigerators, cabinets, sinks and stoves.
Treat entry points around water pipes, utility penetrations, windows, doors, vents, and eaves.
Void applications can be made behind veneers, piers, and chimney bases, into rubble foundations, into block voids
and structural voids, wall voids, under slabs, stoops, porches or to the soil in crawlspaces, and other similar voids.
Spot treat floors, floor coverings, carpets, or rugs for flea and tick control; DO NOT treat entire floor area.
Use Rates:
x For a 0.01% a.i. concentrate, use 0.25 fl. oz. A146.01 (7.5 mL) per gallon of water
x For a 0.03% a.i. concentration, use 0.75 fl. oz. of A146.01 (22.7 mL) per gallon of water.
x For a 0.06% a.i. concentration, use 1.50 fl. oz. of A146.01 (45.4 mL) per gallon of water.
How to Apply:
Spot Treatment: Apply A146.01 using a low pressure system (DO NOT exceed 50 psi at nozzle) with a fan-type nozzle
to uniformly apply spot treatments in and around cupboards, and between, beneath and behind equipment or
appliances.
In the home, all food processing surfaces and utensils must be covered before treatment or thoroughly washed
following treatment. Cover exposed food or remove from area being treated.
6
Spray, Mist or Foam, Crack and Crevice, or Void Applications:
Apply A146.01 spray, mist or foam directly into cracks and crevice or voids where pests or their nests are found.
x Spray: Apply A146.01 Spray Mixture to cracks and crevices in and around baseboards, floors, walls,
appliances, areas around water and sewer pipes, and other voids with a low pressure system ( DO NOT
exceed 50 psi at nozzle tip) using a pinpoint or variable pattern nozzle.
x Mist: Use appropriate mist generating equipment. DO NOT allow mist to drift out of void spaces into
commonly occupied areas of structure.
x Foam: Use foam to treat structural voids and control pests in walls, under slabs, or other void areas. Using
appropriate foam generating equipment, mix dilution with manufacturer’s specified volume of foaming
agent and apply sufficient volume of foam.
When to Apply:
Apply when pests are seen or found. Treat areas that insects inhabit or where they are normally found. Use 0.25 to
1.5 fluid ounces of A146.01 per gallon of water and apply to adequately cover 1000 square feet. Under conditions of
severe pest infestation, when quick knockdown and/or longer residual control is desired, use 1.5 ounces of 0.06%
A146.01 per 1,000 sq. ft.
Treatments may be made at 21-day intervals to maintain adequate control.
Restrictions:
x DO NOT apply broadcast treatments to floors or floor coverings.
x DO NOT apply as a space spray.
x Remove or tightly cover fish tanks and disconnect aerators during application.
x Keep people and pets away from sites of application until treated area has dried.
Application for Indoor Pests
Pests Use Instructions
Cockroaches, Ants, Crickets,
Silverfish, Firebrats, Centipedes,
Millipedes, Clothes Moths, Earwigs,
Pillbugs, Sowbugs, Scorpions and
Spiders
Apply as a coarse low pressure (DO NOT exceed 50 psi at nozzle tip) spot or
crack and crevice spray to areas where these pests are found. Pay particular
attention to dark corners of rooms and closets; floor drains; cracks and
crevices in walls; along and behind baseboards; beneath and behind sinks,
stoves, refrigerators, and cabinets; around plumbing and other utility
installations; doors, windows, and attics and crawl spaces. Spot applications
may be made to floor surfaces along baseboards and around air ducts. Let
surfaces dry before allowing people or pets to contact surfaces.
Pantry Pests To kill adult and accessible immature stages of insects such as lesser grain
borers, grain weevils, flour beetles, saw-toothed grain beetles, cigarette
beetles, merchant grain beetles, Angoumois grain moths, Mediterranean flour
moths, Indian meal moths, grain mites and spider mites: Make applications to
cupboards, shelving and storage areas.
Remove all foodstuffs, all utensils, shelf paper, and other objects before
spraying. Allow all treated surfaces to dry before replacing foodstuffs, utensils
or other items. Any foodstuff accidentally contaminated with any spray
solution must be discarded.
Crawling and Flying Insect Pests:
Flies, Gnats, Midges, Mosquitoes,
Cockroaches, Ants, and Silverfish
Apply directly to walls, ceilings, window screens and other resting areas as a
residual surface treatment. May be used inside residential buildings, as well as
in and around carports, garages, storage sheds, unoccupied barns, stables, or
pet kennels.
Ants, including Pharaoh’s ant Apply to trails, around doors and windows and other areas where ants inhabit
or enter premises.
Bed Bugs and Lice Spray bed bugs and eggs directly wherever possible following site directions
below. For infested mattresses, remove linens and wash before reuse. Apply
7
to mattresses, especially tufts, folds, and edges until moist.
Allow to dry before remaking bed.
Apply to bedsprings, box springs, and the interior of bed frames or
headboards, including all cracks and crevices.
When bed bugs are found in upholstered furniture, apply only to the infested
tufts, seams, folds and edges, but DO NOT make broadcast applications to flat
surfaces where prolonged human contact will occur. If bugs heavily infest
furniture (inside cushions and/or batting) apply a labeled insecticide dust or
consider fumigation.
Apply as a crack and crevice treatment to all baseboards, moldings, beneath
floor coverings and carpets, closets, shelves, curtains, furniture and picture
frames that may provide harborage to bed bugs.
Carpet Beetles, Fleas and Ticks A to tal integrated pest management program is recommended. Thoroughly
vacuum infested areas prior to treatment. These areas include all carpet,
upholstered furniture, baseboards, and other indoor areas frequented by
pets. The vacuum cleaner bag should be discarded in an outdoor trash
container upon completion. Pet bedding should be cleaned or replaced.
Apply this product as a uniform, coarse low-pressure (DO NOT exceed 50 psi
at nozzle tip) spot or crack and crevice treatment to areas where these pests
normally inhabit. Take care to limit spot treatments to pet bedding and its
surrounding area, infested floor coverings and pest habitats. DO NOT treat
entire area of floor, carpet or floor coverings. When these pests are found in
upholstered furniture, apply only to the infested tufts, seams, folds and edges,
but DO NOT make broadcast applications to flat surfaces where prolonged
human contact will occur. This product can also be applied out-of-doors for
flea and tick control (see directions in Outdoor/Perimeter Pests Section).
A146.01 can be used with an Insect Growth Regulator (IGR). For effective
control of fleas, treatment directly to the pet with an EPA registered product
for such use, as well as treating outside areas pets frequent may be required.
DO NOT treat pets with this product.
Continued
Pet Kennels For residual control of crawling and flying insects in and around these
structures, apply as a general surface and/or crack and crevice spray. Optimal
control results if facilities to be treated are clean and if the exterior perimeter
is concurrently treated with this product. Apply only to areas of facility where
animals are not present.
Allow spray to dry before allowing re-entry of animals into treated areas. DO
NOT apply to animal feed or watering equipment. DO NOT treat pets with this
product.
Limit spot treatment to pet beds and infested floor coverings.
FOOD/FEED HANDLING ESTABLISHMENTS
Applications are permitted in food/feed and non-food/non-feed areas of food/feed handling and processing
establishments as a general surface, spot or crack and crevice treatment to control of labeled pests.
Food/Feed handling establishments are defined as places other than private residences in which exposed food/feed is
held, processed, prepared or served. Included also are areas for receiving, storing, packing (canning, bottling,
wrapping, boxing), preparing, edible waste storage and enclos ed processing systems (mills, dairies, edible oils, syrups)
of food/feed. Serving areas where food/feed is exposed and the facility is in operation are also considered food/feed
areas.
8
Non-Food/Non-Feed Areas: garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker
rooms, machine rooms, boiler rooms, mop closets and storage (after packaging, canning or bottling). Treat any area
that insects are observed in or where insects may enter.
General Surface Applications: Before application cover or remove all food/feed processing and/or handling
equipment. After application, wash all equipment, benches, shelving and other surfaces that food/feed will contact in
food/feed processing plants, cafeterias and similar facilities. Clean food/feed handling or processing equipment and
rinse well with clean, fresh water. After application in bakeries, clean all food contact surfaces thoroughly with
appropriate equipment.
Restrictions:
x DO NOT use this application method in the food/feed hand ling areas of the facility when the facility is in
operation or foods/feeds are exposed.
x DO NOT apply to food/feed products.
Spot or Crack & Crevice Applications: Except in federally inspected meat and poultry plants, spot or crack and crevice
applications may be made while the facility is in operation provided exposed food is covered or removed from area
being treated prior to application.
Restrictions:
x Application is prohibited in Federally inspected meat and poultry plants while such facility is in operation.
x DO NOT apply to food or food-handling surfaces.
x In the home, DO NOT allow spray to contact food/feed surfaces. If it does, clean surfaces with soap and
water.
PEST CONTROL OUTDOORS
Apply A146.01 as a perimeter treatment, residual spray or broadcast application to surfaces of buildings, lawns,
grounds and ornamental plantings.
Pests Controlled
Ants
Blue or green bottle
flies
Boxelder bugs
Brown marmorated
stinkbug
Carpenter ants
Centipedes
Cockroaches
Cluster flies
Clover mites
Crickets
Earwigs
Elm leaf beetles
Fire ants
Firebrats
Fleas
Flesh flies
Flies
Gnats
Ground beetles
Hornets
House flies
Midges
Millipedes
Mosquitoes
Moths
Multi-colored Asian
lady beetle
Pillbugs
Scorpions
Silverfish
Sowbugs
Spiders
Springtails
Stable flies
Ticks
Wasps
Yellow jackets
Where to Apply:
Apply as a perimeter treatment or residual spray around [residential and] non-residential settings. Treatments should
begin at the first sighting of pests.
Residual Spray:
Apply A146.01 to surfaces on building exteriors, porches and patios (as spot/crack and crevice applications only), and
other structures, around door and windows, eaves and attic vents, utility entry points, soffit areas and other exterior
openings (foundation cracks or drilled holes) where pests enter the structure or where they have been seen or found,
or can find shelter.
9
Perimeter Treatments:
For best results, apply A146.01 to areas where pests are seen and may find entrance. Treat the outside of the
structure, including walls (to a height of 2 feet), around door and window frames, and soffits where pests are active
or may enter or hide. Treat the soil, turf, or other ground covering adjacent to the structure (7 feet or less from the
base of a man-made structure to pervious surfaces) where pests are seen, have been found, or can find shelter. In ant
management programs, apply to flower, shrub or ornamental plant beds where ants may be nesting, find food or
forage.
Restrictions:
1. DO NOT water the treated area to the point of run-off
2. DO NOT make applications during rain.
3. DO NOT apply directly to impervious horizontal surfaces such as sidewalks, driveways, and patios except as a
spot or crack and crevice treatment. During application, DO NOT allow pesticide to enter or run-off into storm
drains, drainage ditches, gutters, or surface waters.
4. All outdoor spray applications must be limited to spot or crack-and-crevice treatments only, except for the
following permitted uses:
a) Application to pervious surfaces such as soil, lawn, turf, and other vegetation;
b) Perimeter band treatments of 7 feet wide or less from the base of a man-made structure to pervious
surfaces (e.g., soil, mulch, or lawn);
c) Applications to underside of eaves, soffits, doors, or windows permanently protected from rainfall
by a covering, overhang, awning, or other structure;
d) Applications around potential exterior pest entry points into man-made structures such as doorways
and windows, when limited to a band not to exceed one inch;
e) Applications to vertical surfaces (such as the side of a man-made structure) directly above
impervious surfaces (e.g., driveways, sidewalks, etc.) up to 2 feet above ground level;
f) Applications to vertical surfaces directly above pervious surfaces, such as soil, lawn turf, mulch, or
other vegetation) only if the pervious surface does not drain into ditches storm drains, gutters, or
surface waters.”
g) “Do not apply when the wind speed is greater than 15 mph.
Use Rates:
x For a 0.01% dilution, use 0.25 fl. oz. A146.01 (7.5 mL) per gallon of water
x For a 0.03% dilution, use 0.75 fl. oz. of A146.01 (22.7 mL) per gallon of water.
x For a 0.06% dilution, use 1.50 fl. oz. of A146.01 (45.4 mL) per gallon of water.
How to Apply:
Apply as a coarse low pressure (DO NOT exceed 50 psi at nozzle tip) spray at the rate of 0.25 to 1.5 fluid ounces of
this product per 1,000 square feet of surface. Apply in a sufficient volume of water to provide adequate coverage but
DO NOT allow run-off to occur.
High volume applications using power sprayers:
You must adjust the rate of product dilution to ensure the correct amount of the product (see Use Rate section
above) is applied per 1,000 square feet of treated surface. For example, mixing 12.5 fluid ounces of this product in a
50 gallon tank, while using an application volume of 3.0 gallons per 1,000 square feet, will apply 0.75 fluid ounces of
this product per 1,000 square feet. The table below gives examples of end use dilutions for typical power spraying
application volumes.
10
DILUTION RATE CHART
Amount of Product Application Volume
Gallons of Water
Concentration (%AI)
In Spray Solution
Fluid Ounces Milliliter
0.25 7.5 1
2
3
4
5
0.01%
0.005%
0.0033%
0.0025%
0.002%
0.75 22.7 1
2
3
4
5
0.03%
0.015%
0.01%
0.0075%
0.006%
1.5 45.4 1
2
3
4
5
0.06%
0.03%
0.02%
0.015%
0.012%
MIXING DIRECTIONS FOR A146.01 -OUTDOOR PERIMETER APPLICATION
I. A146.01 DILUTION (0.25 oz. /1000 sq. ft.) - (Based on one [home][or][structure] being 1,000 sq. ft.)
Tank Size 15 Gallon 25 Gallon 50 Gallon 100 Gallon
Finished
Spray:
Gallons Per
1000 sq. ft
A146.01 Per
Tank (fI. oz.)
[Homes]
[Structures]
Per Tank*
A146.01 Per
Tank (fl. oz.)
[Homes]
[Structures]
Per Tank*
A146.01 Per
Tank (fl. oz.)
[Homes]
[Structures]
Per Tank*
A146.01 Per
Tank (ft. oz.)
[Homes]
[Structures]
Per Tank*
1 3.75 15 6.25 25 12.50 50 25.00 100
3 1.25 5 2.08 8 4.17 16 8.33 33
5 0.75 3 1.25 5 2.50 10 5.00 20
10 0.37 1.5 0.63 2.5 1.25 5 2.50 10
*Based on A146.01 applied at 0.25 ounces per 1,000 square feet treated per [home][or][structure].
II. A146.01 DILUTION (1.00 oz. /1000 sq. ft.)
Tank Size 15 Gallon 25 Gallon 50 Gallon 100 Gallon
Finished
Spray:
Gallons Per
1000 sq. ft.
A146.01 Per
Tank (fI. oz.)
[Homes]
[Structures]
Per Tank*
A146.01 Per
Tank (fl. oz.)
[Homes]
[Structures]
Per Tank*
A146.01 Per
Tank (fl. oz.)
[Homes]
[Structures]
Per Tank*
A146.01 Per
Tank (fl. oz.)
[Homes]
[Structure s]
Per Tank*
1 15.0 15 25.0 25 50 50 100.0 100
3 5.0 5 8.4 8.3 16.70 16.7 33.3 33.3
5 3.0 3 5.0 5 10.0 10 20.0 20
10 1.5 1.5 2.5 2.5 5.0 5 10.0 10
*Based on A146.01 applied at 1.00 ounce per 1,000 square feet treated per [home][or][structure].
11
Application For Outdoor/Perimeter Pests
Pests Use Instructions
Ants, roaches and other listed
crawling pests
Apply as a residual spray and/or perimeter treatment around the infested
structure as described above.
Locate and treat ant nests if possible. Follow trails of foraging worker ants and
inspect for likely nest sites. If ants are nesting in soil, drench or inject the nest
and surrounding soil.
Foliar applications to landscape ornamentals will control aphids, scale insects,
and other plant-sucking insects and limit the production of honeydew (an
important food source for ant populations). Apply a light mist of the dilute
spray, and DO NOT allow excess run-off. Treat thoroughly for good coverage,
including the underside of leaves.
Remove or prune away any shrubbery, bushes, or tree branches touching the
structure. Vegetation touching the structure may offer ants an entry route
into the structure, allowing ants to avoid contact with the treatment.
Continued
Occasional invaders including multi-
colored Asian lady beetle, elm leaf
beetle, boxelder bug, and brown
marmorated stinkbug.
Apply directly to insects that have congregated around doors, windows and
similar areas where they may enter the structure. Apply a perimeter
treatment as described above.
For best results, treat trees and shrubs infested with boxelder bugs, elm leaf
beetles, and other occasional invading species early in the season. [Tree
spraying may require ornamental license - check with your local regulator].
Fleas and Ticks (including ticks that
may transmit
Rocky Mountain Spotted Fever)
Apply as a coarse wet spray to areas where fleas and ticks are most likely to
be found: dog houses, kennels, runways, along paths or trails, under plants,
shrubs, bushes, trees, or other shaded, moist areas where pests may be
found.
Treat the entire area where these pests could be present. Fleas and ticks may
be re-introduced from surrounding areas by host animals.
Mosquitoes
Treat with spray or mist around landscape plants, turf and ground cover,
under decks, around building foundations and other places where mosquitoes
may rest.
Fire Ants
Apply as a mound drench. Dilute 1.5 oz per one gallon of water. Gently
sprinkle 1 to 2 gallons of the diluted insecticide over the surface of each
mound and surrounding area to a 2-foot diameter.
For best results, apply in cool weather, 65 to 80°F or in early morning or late
evening hours. Treat new mounds as they appear.
Scorpions
Treat areas where scorpions may hide. Treat known or suspected harborages
on and around exterior walls. Apply spot treatments into cracks, crevices,
weep holes or other access points into hollow block walls or masonry veneer.
Spray around and beneath stones and along rocky areas.
Scorpions will often harbor beneath the bark on trees, so inspect these areas
and treat as required. When possible, remove piles of debris and building
materials near the exterior wall that can harbor the pests.
Apply a perimeter treatment to the exterior walls and adjacent soil. You may
treat around piles of firewood, but DO NOT treat firewood with this product.
12
Hornets, wasps, and yellow jackets Make a pin stream application directly to hornet or yellow jacket nests. To
reduce sting threat, make applications in the evening when the insects are
inside the nest. For paper wasps, use a pin stream or fan spray and apply over
surface of exposed nest.
Remove and destroy treated nests to prevent emergence of newly emerged
insects. If removal is not possible, retreat nests as needed.
Centipedes, millipedes, pillbugs,
sow bugs, springtails
Apply perimeter treatment to reduce the number of insects entering the
structure. Thoroughly treat mulched areas. Correcting moisture problems
around the structure will reduce pest pressure.
House flies and Cluster flies Apply low pressure ( DO NOT exceed 50 psi at nozzle tip) mist or spray to
outside of surfaces of buildings, porches, patios, garages, fences, and other
areas where house flies rest.
Cluster flies: Treat in late summer or fall, just before cluster flies begin looking
for winter shelter. Spray siding, eaves, around windows and doors, and
window screens. To help reduce infestations, treat cracks and crevices, attics
and other indoor winter hiding places.
WOOD INFESTING PESTS
Apply A146.01 as a perimeter treatment, residual spray or broadcast application to surfaces of buildings, lawns,
grounds and ornamental plantings.
Pests Controlled
Beetles
- Lyctid or powder post
- Anobiid or deathwatch
- False powderpost
- Old house borers
- Wharf borers
- Ambrosia beetles
- Bark beetles
Carpenter ants
Carpenter bees
Drywood termites
For treatment of wood infested with, or subject to infestation by, wood-infesting pests, apply where pests have been
seen or found, or can find shelter. Not for structural protection.
Use Rates:
For a 0.06% dilution, use 1.50 fl. oz. of A146.01 (45.4 mL) per gallon of water.
How to Apply:
Apply spray, mist, or foam as described below in the application section. Treatment dilutions may also be applied to
wood surfaces by paint brush or roller. DO NOT contact treated surfaces until dry.
Apply when pests are seen or found. Treatments may be applied at 21-day intervals to maintain adequate control.
Foam Applications:
This product can be converted to foam and used to treat structural voids to control wood-infesting pests in walls,
under slabs, within masonry voids, or in other void areas. Mix end-use dilution with manufacturer's specified volume
of foaming agent.
13
Application For Wood-Infesting Pests
Pests Use Instructions
Drywood termites & wood- infesting
beetles
(Not for Structural Protection)
Galleries and structural voids: Treat by applying sprays, mists, or foams.
Locate galleries by using visual signs (frass or pellets, blistered wood,
emergence or clean-out holes), the presence of live insects, mechanical
sounding techniques, or listening devices (e.g., stethoscopes, acoustic
emission detectors). Penetrate the gallery system by drilling holes to receive
the injector tip or treatment tool.
Distribute drill holes to adequately cover the gallery system. Apply as a low
pressure (DO NOT exceed 50 psi at nozzle tip) spray, or by misting or, where
appropriate, by foaming.
• DO NOT treat to the point where run-off is detected from adjacent holes.
• Avoid drilling where electrical wiring, plumbing lines, etc. are located.
• DO NOT apply where electrical shock hazards exist.
• Drill holes in commonly occupied areas must be sealed after treatment.
Wood surfaces: Treat by spray or mist or, where appropriate, foam
applications. For inaccessible surfaces, drill and treat the interior of structural
voids. Surfaces treated may include exposed wooden surfaces in crawlspaces,
basements, or attics. Wooden exterior surfaces: decks, fencing, or siding,
structural voids, channels in damaged wood, in spaces between wooden
members of a structure, and junctions between wood and foundations. Apply
by brushing or as a coarse, low pressure (DO NOT exceed 50 psi at nozzle tip)
spray to the wood surface; apply sufficient volume to cover the surface to the
point of wetness, but avoid applying to the point of run-off.
When spraying wood surfaces overhead in living areas, cover surfaces below
the treated area with plastic sheeting or similar material. DO NOT contact
treated surfaces until spray deposits have dried.
Carpenter ants Homes and other structures: Apply around doors and windows and other
places where carpenter ants may enter. Spray or foam into cracks and
crevices, or spray, mist or foam through small drilled holes into voids where
ants or their nests are present. Use enough spray or foam to cover the area,
but DO NOT exceed 1 gallon of dilute suspension per 1,000 square feet of
treated surface.
Remove or prune away any shrubbery, bushes, or tree branches touching the
structure. Vegetation touching the structure may offer a route of entry for
ants into the structure, allowing ants to avoid contact with the treatment.
Exterior ant nests: Inside trees, utility poles, fencing and decking materials
and similar structural members, drill to find the interior infested cavity and
inject spray, mist, or foam using a treatment tool with a backsplash guard.
Tunneling in soil: Apply as a soil drench or inject the dilution or foam in the
soil at intervals of 8 to 12 inches. Use 1 gallon of dilution per 8 square feet.
Treat along the edges of walls, driveways or other hard surfaces where ants
are tunneling beneath the surface.
Protecting firewood from carpenter ants: Treat soil beneath firewood before
stacking at 1 gallon of dilution per 8 square feet. DO NOT treat firewood with
this product.
ContinuedCarpenter bees Apply as a spray or mist, or sufficient volume of foam, directly into gallery
entrance holes. Leave entrance open to be sure that returning adult bees
are killed. When there is no longer any insect activity, the entrance hole
may be sealed with a suitable sealant.
Exterior wood surfaces may be treated by general surface application to
prevent nest cavity excavation by adult carpenter bees.
14
TURFGRASS APPLICATIONS
A146.01 controls listed insects on turfgrasses and ornamental plants in outdoor areas: athletic fields, recreational
areas, residential landscapes, parks, and public and commercial sites. Make application when insects first appear,
ensuring uniform coverage.
How to Apply:
Apply as a broadcast application using a minimum of 2 gallons of water per 1000 sq. ft. with a hydraulic boom-type
sprayer or other suitable equipment for turfgrass pests. Follow the specified rates listed in the Application Rates for
Turfgrass Sites table. Use higher volumes (4 to 10 gallons of water per 1000 sq. ft.) for areas of dense turfgrass and/or
where turfgrass is mowed at greater heights. Control is achieved when the insecticide contacts the target pest. For
best results on surface-feeding insects, DO NOT irrigate or mow within 24 hours after application. For subsurface-
feeding insects, apply 0.25 to 0.5 inch of water immediately after application. DO NOT allow people or pets into the
treatment area until turfgrass has dried.
RESTRICTIONS:
In New York State, product may not be applied to turf within 100 feet of a coastal marsh or stream that drains directly
into a coastal marsh. For control of turf insects in New York, a second application may be made after two weeks if
target insect activity persists.
Application Rates For Turfgrass Pests
Pests Rates Use Instructions
Ants, armyworms, centipedes,
chiggers, cockroaches, crickets,
cutworms, fleas(adult), grasshoppers,
ground beetles, Japanese beetles
(adults), leafhoppers, mealybugs,
pillbugs, scorpions, sod webworms,
sowbugs, springtails, spiders, ticks
0.4 to 0.6 fl. oz./1000 sq. ft
or
17. 5 to 26 fl. oz./A
or
0.06 to 0.08 lb.ai/A
Apply at first sign of pest presence. Apply as a
broadcast spray in a minimum of 2 gallons of
water per 1000 sq. ft.
For best control of surface feeders such as
cutworms and webworms, DO NOT water or
mow for 24 hours after application.
For subsurface-feeders, such as mole crickets,
apply 0.25 to 0.5 inch of water immediately after
application.
The use of silicone surfactants in tank mixtures
with A146.01 may enhance the control of some
insects.
Annual bluegrass weevil (adult),
billbugs (adult), black turfgrass
ataenius (adult), chinch bugs, mites*,
mole crickets.
0.6 to 0.9 fl. oz./sq. ft.
or
26 to 39 fl. oz./A
or
0.08 to 0.13 lb. ai/A
* Suppression only
LANDSCAPE ORNAMENTAL TREATMENTS
Use A146.01 to control the listed insects on landscape ornamentals: trees, shrubs, evergreens and foliage plants. Mix
the A146.01 with the required amount of water and apply as a finished spray to upper and lower leaf surfaces to
ensure thorough coverage, but not to the point of run-off. Make sure to apply sufficient product to wet the leaves,
trunk and branches of ornamentals.
Restrictions:
Similar formulations have been tested on many species of ornamental plants with good results, but if local use
information in this product is not available, pre-spray a few plants to check for compatibility.
15
Application Rates for Ornamentals
Pests Rates Remarks
Adelgids, ants, aphids, azalea lace bugs, bagworms, boxelder
bugs, cankerworms, cardamom thrips, cockroaches, crickets,
elm leaf beetles, elm, spanworms, European pine sawflies, fall
webworms, flea beetles, flies, fungus gnats, grasshoppers,
greenstriped mapleworm, Gypsy moth (larvae), imported
willow leaf beetles, Japanese beetles (adults)*, June beetles
(adults), lace bugs, leaf-feeding caterpillars, leafhoppers, leaf
rollers, loopers, leaf skeletonizers, mealybugs, midges,
mimosa webworms, mites**, orangestriped oakworms,
pillbugs, pine shoot beetles, pine tip moths, pinyon
spindlegall midges, plant bugs, redhumped caterpillar, red
imported fire ants, sawfly larvae, sowbugs, spiders,
springtails, spanworms, scale insects (crawlers), tent
caterpillars, ticks, webworms, yellownecked caterpillar
4 to 8 oz./100
gallons of water
Apply at first sign of pest
presence.
Mix A146.01 with the
required amount of water
and apply as a finished
spray to ensure thorough
coverage of all plant
surfaces, but not to the
point of run-off.
*Will provide anti-feedant properties on treated ornamentals against Japanese beetles.
**Suppression only.
STORED GRAIN[*]
To control adults and accessible stages of insect pests: lesser grain borer, larger grain borer, Angoumois grain moth,
Indian Meal moth, tobacco moth, dermestids, and bean weevil; also to suppress populations of granary weevil, rice
weevil, maize weevil, saw-toothed grain beetle, red flour beetle, and confused flour beetle.
[*Applications to stored grain not approved for use in the state of California.]
How To Apply:
Dilute A146.01 with water [or FDA approved food grade mineral or soybean oils] and apply to the moving grain
stream as a coarse spray to provide a concentration of 0.5 ppm of deltamethrin on the grain.
Final spray volume with water solutions - 5 gallons of liquid per 1000 bushels of grain [Final spray volume with oil
solutions - Apply at oil manufacturer's rates]
For water solutions, intermittent agitation is necessary. [For oil solutions, constant agitation is required.] For uniform
treatment, use a moving grain stream.
For stored grain, apply A146.01 in solution at the rate of 5 gallons of solution per 1000 bushels to achieve a 0.5 ppm
concentration of deltamethrin. Apply at rates as shown in the tables below:
AMOUNT OF A146.01/1000 BUSHELS OF GRAIN
GRAIN A146.01 INSECTICIDE TREATMENT AT 0.5 PPM GALLONS OF DILUTE
SOLUTION
FL. OZ. ML
BARLEY 7.31 216 5
CORN 8.53 252 5
OATS 4.88 144 5
POPCORN 8.53 252 5
RICE 6.86 202 5
RYE 8.53 252 5
SORGHUM (milo) 8.53 252 5
TRITICALE[*] 9.14 270 5
WHEAT 9.14 270 5
[*Not Registered for Usein Use in by California]
16
Final spray volumes to treat 100 metric tons of grain at 0.5 ppm concentrations of deltamethrin are provided in the
tables below corresponding to the grain being treated.
AMOUNT OF A146.01/100 METRIC TONS OF GRAIN
GRAIN A146.01 PER 100 METRIC TONS AT 0.5 PPM LITERS OF DILUTE
SOLUTION
FL.OZ. ML
BARLEY 33.6 993 86.9
CORN 33.6 993 74.5
OATS 33.6 993 130.4
POPCORN 33.6 993 74.5
RICE 33.6 993 92.7
RYE 33.6 993 74.5
SORGHUM (milo) 33.6 993 74.5
TRITICALE[*] 33.6 993 69.5
WHEAT 33.6 993 69.5
[*Not in Registered for Use in by California]
SEED TREATMENT
Apply A146.01 to protect stored grain seed against injury from stored grain insects listed above. Clean and treat seed
storage areas prior to storage. If seed is insect infested, fumigate** to control existing populations and apply A146.01
for residual protection. A146.01 may also be used in conjunction with registered fungicide or other insecticide seed
protectants, to protect barley, corn, oats, popcorn, rice, rye, sorghum, [triticale*] and wheat seed during the seed
treating process, and prior to bagging or placing in bulk seed storage at the rate of 0.5 ppm. When treating seed with
other pesticide products, the treated seed should be properly tagged, indicating the seed should not be used for food,
feed or oil purposes. Seed treated with A146.01 alone is considered grain.
**Fumigate with EPA-registered fumigant according to manufacturer's label recommendations.
[*Not Registered infor Use inby California]
GRAIN BINS AND WAREHOUSES
Dilute 0.25-1.5 fl. oz. of A146.01 with water to make 1 gallon of solution. Before storing or handling grain, apply
finished spray to equipment, wall and floor surfaces of grain bins and warehouses at the rate of 1 gallon per 1000 sq.
ft. but DO NOT allow run-off to occur. Apply after equipment bins and buildings have been thoroughly cleaned. Empty
bins or warehouses should be fumigated with an EPA registered fumigant according to the manufacturer's label
recommendations as well as areas that are difficult to get into. Use A146.01 as a perimeter treatment to prevent
infestation of these structures. Apply to areas where pests are seen or may find entrance. Treat a band of soil or lawn
up to 7 feet wide around and adjacent to structures and treat the foundation to a height of 2 feet. Mix 0.25-1.5 fl. oz.
of A146.01 with water to make 1 gallon of solution. Apply as a coarse spray at a rate of 1 gallon per 1000 sq. ft.
Thoroughly and uniformly wet the barrier area but DO NOT allow run-off to occur.
[Directions below are for Use as a Coating Additive ONLY –
PAINT ADDITIVE USE
A146.01 may be mixed with latex coatings and oil-based coatings such as stains, varnishes and sealers for use to kill
crawling and flying insects when exposed to treated surfaces.
Note:
To ensure product efficacy, DO NOT prepare more than the amount of latex coating that can be applied within 3
hours of mixing. For oil-based coating, stains, varnish or sealers, the amount of coating formulated should not exceed
the amount that can be applied within 6 hours.
Restrictions:
DO NOT allow children or pets to enter the treated area until surfaces are dry.
17
Mixing Instructions:
Add 1 2/3 fl. oz. to 1 gallon [8 1/3 fl. oz. to 5 gallons] of latex coating (water base), oil base coating, and stains or
sealers. Mix well to insure proper dilution.
How to Apply:
Apply treated coating with brush, roller, or conventional airless equipment.
Note:
A146.01 can be applied only as a crack and crevice or spot treatment indoors. DO NOT use for broadcast interior
applications such as entire walls, ceilings, and floors.
Permitted areas of use include the food/feed and non-food/non-feed areas of:
Aircraft (cargo area only)
Apartment buildings
Bakeries
Bottling facilities
Breweries
Buses
Cafeterias
Candy plants
Canneries
Dairy product processing plants
Food manufacturing plants
Food processing plants
Food service establishments
Granaries and grain mills
Hospitals
Hotels
Houses
Industrial buildings
Installations
Kitchens
Laboratories
Mausoleums
Meat, poultry and egg processing and packaging plants
Mobile and motor homes
Nursing homes
Offices
Railcars
Restaurants
Schools
Ships and vessels
Trailers
Trucks
Warehouses
Wineries
Aircraft (cargo area only)
Apartment buildings
Bakeries
Bottling facilities
Breweries
Buses
Cafeterias
Candy plants
Canneries
Dairy product processing plants
Food manufacturing plants
Food processing plants
Food service establishments
Granaries and grain mills
Hospitals
Hotels
Houses
Industrial buildings
Installations
Kitchens
Laboratories
Mausoleums
18
Meat, poultry and egg processing and packaging plants
Mobile and motor homes
Nursing homes
Offices
Railcars
Restaurants
Schools
Ships and vessels
Trailers
Trucks
Warehouses
Wineries
Restrictions:
x DO NOT apply to classrooms when in use.
x DO NOT use in aircraft cabins.
x DO NOT apply this product in occupied patient rooms or in any rooms/areas while occupied by patients,
the elderly or infirm.
x DO NOT apply to institutions including libraries, sports facilities, or in the immediate area when occupants
are present.
Pantry Pest Control:
To kill adult and accessible stages of insect pests: Spiders, ticks, cockroaches and ants. Make application to cupboards,
shelving and storage areas. Remove all foodstuffs, all utensils, shelf paper and other objects before coating with this
product. Allow all treated surfaces to dry and cover shelves with clean paper prior to replacing foodstuffs, utensils or
other items. Discard any foodstuff accidentally contaminated with any coating solution.
Crawling Insect Pests (such as Spiders, Ticks, Cockroaches, Mosquitoes, Imported and, Southern Fire Ants,
Leafcutter Ants and Silverfish):
Apply A146.01 to localized areas of walls, ceilings and other resting areas as a crack and crevice or spot treatment.
A146.01 may be used inside residential buildings, as well as in and around carports, garages, storage sheds,
unoccupied horse stables and pet kennels.
Pet Kennels:
For residual control of crawling and flying insects in and arou nd these structures, apply as cracks and crevices or spot
treatment. Optimal control results if facilities to be treated are clean, and coated surfaces are cleaned regularly (every
21 days). Apply only to areas of facility where animals are not present. Allow coating to dry before allowing re-entry
of animals into treated areas. DO NOT apply to animal feed or watering equipment.
Food/Feed Handling Establishments:
For control of all labeled pests, applications are permitted in food/feed and non-food/non-feed areas of food/feed
handling and processing establishments as spot or crack and crevice treatment.
Food/Feed handling establishments are defined as places other than private residences in which exposed food/feed is
held, processed, prepared or served. Included also are areas for receiving, storing, packing (canning, bottling,
wrapping, boxing), preparing, edible waste storage and enclos ed processing systems (mills, dairies, edible oils, syrups)
of food/feed. Serving areas where food/feed is exposed and the facility is in operation are also considered food/feed
areas.
Non-Food/Non-Feed Areas:
19
Examples of non-food/non-feed areas: garbage rooms, lavatories, floor drains (to sewers), entries and vestibules,
offices, locker rooms, machine rooms, boiler rooms, mop closets and storage (after packaging, canning or bottling).
All areas that insects inhabit or through which insects may enter should be treated.
Note:
DO NOT use this application method in the food/feed handling area s of the facility when the facility is in operation or
foods/feeds are exposed. DO NOT apply directly to food/feed products. Cover or remove all food/feed processing
and/or handling equipment during application. After application in food/feed processing plants, cafeterias and similar
facilities wash all equipment, benches, shelving and other surfaces which food/feed will contact. Clean food/feed
handling or processing equipment and thoroughly rinse with cl ean, fresh water. After application in bakeries, clean all
food contact surfaces thoroughly with appropriate equipment.
Spot or Crack and Crevice Applications:
Except in federally inspected meat and poultry plants, spot or crack and crevice applications may be made while the
facility is in operation, provided exposed food is covered or removed from area being treated prior to application. DO
NOT apply directly to food or food- handling surfaces. In the home, DO NOT allow coating to contact food/feed
surfaces. If it does, clean surfaces with soap and water.
Residual Application:
Apply A146.01C to surfaces of buildings, window frames, eaves, an d garages, to control Spiders, Ticks, American and
German Cockroaches, Silverfish, Imported and Southern Fire Ants and Leafcutter Ants.
Note:
DO NOT apply to furniture, swing sets, or other outdoor playground articles.
CORRUGATED and CARDBOARD BOXES AND LINERS
For Commercial/Industrial Use Only
A146.01 provides residual protection to the outer surface of corrugated and cardboard (folding carton) boxes against
insects that damage or feed on paper, corrugated or cardboard (folding carton).
Mixing Instructions:
To protect the outer surface of the box from damage from inse cts, such as spiders, ticks, silverfish, cockroaches, ants
and weevil, mix 2.1 fluid oz. A146.01 to coating for corrugated or cardboard (folding carton).
Note:
This coating can only be applied to the outside of the corrugated or cardboard (folding carton) box or to corrugated or
cardboard (folding carton) box liner that is to be used for the exterior portion of the corrugated or cardboard (folding
carton) box.
How to Apply:
Make application at a rate of one gallon of coating containing A146.01 to 6000 to 8000 square ft. of surface (include
size press, rod, blade, air knife, offset press, gravure and flexography). DO NOT APPLY TO INNER SURFACE OF BOXES.]
20
LIMITATION OF WARRANTY AND LIABILITY
IMPORTANT: READ BEFORE USE. Read the entire Directions for Use,
Conditions of Warranties and Limitations of Liability before using this
product. If these terms and conditions are not acceptable, return the
unopened product container at once. By using this product, user or
buyer accepts the following Disclaimer of Warranties and Limitations
of Liability. CONDITIONS: The directions for use of this product are
believed to be adequate and must be followed carefully. However, it
is impossible to eliminate all risks associated with the use of this
product. Ineffectiveness, injury, and other unintended consequences
may result because of such factors as manner of use or application
(including misuse), the presence of other materials, weather
conditions, and other unknown factors, all of which are beyond the
control of ATTICUS, LLC. All such risks shall be assumed by the user or
buyer.
DISCLAIMER OF WARRANTIES: To the extent consistent with
applicable law, ATTICUS, LLC makes no other warranties, express or
implied, of merchantability or of fitness for a particular purpose or
otherwise, that extend beyond statements on this label. LIMITATIONS
OF LIABILITY: To the extent consistent with applicable law, neither
ATTICUS, LLC the manufacturer, nor the Seller shall be liable for any
indirect, special, incidental or consequential damages resulting from
the use, handling, application, storage, or disposal of this product. To
the extent consistent with applicable law, the exclusive remedy of the
user or buyer for any and all losses, injuries or damages resulting from
the use, handling, application, or storage of this product, whether in
contract, warranty, tort, negligence, strict liability or otherwise, shall
not exceed the purchase price paid.
[A146.04] is a trademark of Atticus, LLC
Suspend® is a registered trademark of Bayer.
.
STORAGE AND DISPOSAL
DO NOT contaminate water, food or feed by storage or disposal.
DO NOT pour or dispose down the drain or sewer. Call your local solid waste agency for local disposal options.
PESTICIDE STORAGE: Mix as needed. Store in original container in a secured dry storage area. Avoid extremes in
temperatures. Prevent cross-contamination with other pesticides and fertilizers. If the container is leaking
and/or material is spilled on floor or paved surfaces, absorb on sawdust or other commercially available
absorbing material, sweep up and remove to chemical waste area for disposal. Concentrate is stable at normal
storage temperatures.
PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be disposed of on site or at an
approved waste disposal facility.
CONTAINER HANDLING:
EŽŶƌĞĨŝůůĂďůĞĐŽŶƚĂŝŶĞƌƐчϱŐĂůůŽŶƐ͗Non-refillable container. DO NOT reuse or refill this container. Triple rinse
container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into
application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container ¼
full with water and recap. Shake container for 10 seconds. Pour rinsate into application equipment or a mix tank
or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this
procedure two more times. Then offer container for recycling, if available, or puncture and dispose of container
in a sanitary landfill, or by incineration.
EŽŶƌĞĨŝůůĂďůĞĐŽŶƚĂŝŶĞƌƐग़ϱŐĂůůŽŶƐ͗ Non-refillable container. DO NOT reuse or refill this container. Triple rinse
container (or equivalent) promptly after emptying. Triple rinse as follows: Empty remaining contents into
application equipment or a mix tank. Fill the container ¼ full with water. Replace and tighten closures. Tip
container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand
the container on its end and tip it back and forth several times. Turn the container over onto its other end and
tip it back and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate
for later use or disposal. Repeat this procedure two more times. Then offer container for recycling, if available,
or puncture and dispose of container in a sanitary landfill, or by incineration.
21
{LANGUAGE ON LABEL AFFIXED TO
CONTAINER}
A146.01™
Alternate Brand Name: Adjourn SC]
[Contains deltamethrin, the active ingredient used in Suspend®].
[Provides Control of Listed Insect/Pests in and around the Home]
[For Insect Control on Commercial and Residential Turf and Landscape
Ornamental Plants]
[For crack and crevice and spot applications in homes, hotels, schools and food
handling establishments.]
[Controls ants, bedbugs, cockroaches, fleas, flies, silverfish, spiders and many
other listed pests.]
[Mattress application for bedbugs and lice.]
[Broadcast spray for lawns and turfgrass to control fleas, ticks and other listed
insects.]
[Concentrated suspension of micro-crystals]
[Residual control that lasts for up to 90 days]
[For use on Paints, Plastics, Fabrics and other surfaces]
[Kills crawling and flying insects when exposed to treated surfaces.]
[Protects Stored Grains and seeds against damage from Indian Meal Moth, Saw-
Toothed Grain Beetle, Red Flour Beetle, Rice Weevil, Maize Weevil, and many
other listed pests.] [For both indoor and outdoor uses]
[Agitate Well]
Active Ingredient: (% by weight)
Deltamethrin..................................................................................................4.75%
Other Ingredients ........................................................................................95.25%
Total ............................................................................................................100.0%
KEEP OUT OF REACH OF CHILDREN
CAUTION
Si usted no entiende la etiqueta, busque a alguien para que se la explique a
usted en detalle. (If you DO NOT understand the label, find someone to explain
it to you in detail.)
FIRST AID
If inhaled x Move person to fresh air.
x If person is not breathing, call 911 or an ambulance, then
give artificial respiration, preferably by mouth-to-mouth, it
possible.
x Call a poison control center or doctor for further treatment
advice.
HOT LINE NUMBER
Have the product container or label with you when calling a poison control
center or doctor, or going for treatment. You may also contact SafetyCall at
1-844-685-9173 for emergency medical treatment information.
For Chemical Emergency
Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night
Within USA and Canada: 1-800-424-9300 or +1 703-527-3887 (collect calls
accepted)
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION
Harmful if inhaled. Avoid breathing vapor or spray mist. Contact with product
may result in transient tingling and reddening of the skin. Remove contaminated
clothing and wash before reuse.
Environmental Hazards:
This product is extremely toxic to fresh water and estuarine fish and
invertebrates. To protect the environment, DO NOT allow pesticide to enter or
run-off into storm drains, drainage ditches, gutters or surface waters. Applying
this product in calm weather when rain is not predicted for the next 24 hours
will help to ensure that wind or rain does not blow or wash pesticide off the
treatment area. Rinsing application equipment over the treated area will help
avoid run-off to water bodies or drainage systems. This pesticide is highly toxic
to bees exposed to direct treatment. DO NOT apply or allow it to drift to crops
or weeds on which bees are foraging the treatment area. DO NOT apply directly
to water, to areas where surface water is present or to intertidal areas below
the mean high water mark. DO NOT contaminate water when disposing of
equipment wash-waters or rinsate.
Physical and Chemical Hazards:
DO NOT use water-based sprays of A146.01 in conduits, motor housings,
junction boxes, switch boxes, or other electrical equipment because of possible
shock hazard.
See inside label booklet for additional Precautionary Statements and Directions for Use.
[A146.01] is not manufactured, or distributed by Bayer Environmental Science, seller
of [Suspend®SC].
Manufactured for: EPA Reg. No. 91234-263
Atticus, LLC EPA Est. No. _________
940 NW Cary Parkway, Suite 200 NET CONTENTS: ______
Cary, NC 27513
a
DELTAMETHRIN GROUP 3A INSECTICIDE
STORAGE AND DISPOSAL
DO NOT contaminate water, food or feed by storage or disposal.
DO NOT pour or dispose down the drain or sewer. Call your local solid waste
agency for local disposal options.
PESTICIDE STORAGE: Mix as needed. Store in original container in a secured dry
storage area. Avoid extremes in temperatures. Prevent cross-contamination with
other pesticides and fertilizers. If the container is leaking and/or material is
spilled on floor or paved surfaces, absorb on sawdust or other commercially
available absorbing material, sweep up and remove to chemical waste area for
disposal. Concentrate is stable at normal storage temperatures.
PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be
disposed of on site or at an approved waste disposal facility.
KEd/EZ,E>/E'͗EŽŶƌĞĨŝůůĂďůĞĐŽŶƚĂŝŶĞƌƐчϱŐĂůůŽŶƐ͗Non-refillable
container. DO NOT reuse or refill this container. Triple rinse container (or
equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining
contents into application equipment or a mix tank and drain for 10 seconds after
the flow begins to drip. Fill the container ¼ full with water and recap. Shake
container for 10 seconds. Pour rinsate into application equipment or a mix tank
or store rinsate for later use or disposal. Drain for 10 seconds after the flow
begins to drip. Repeat this procedure two more times. Then offer container for
recycling, if available, or puncture and dispose of container in a sanitary landfill,
or by incineration.
EŽŶƌĞĨŝůůĂďůĞĐŽŶƚĂŝŶĞƌƐग़ϱŐĂůůŽŶƐ͗ Non-refillable container. DO NOT reuse or
refill this container. Triple rinse container (or equivalent) promptly after
emptying. Triple rinse as follows: Empty remaining contents into application
equipment or a mix tank. Fill the container ¼ full with water. Replace and
tighten closures. Tip container on its side and roll it back and forth, ensuring at
least one complete revolution, for 30 seconds. Stand the container on its end
and tip it back and forth several times. Turn the container over onto its other
end and tip it back and forth several times. Empty the rinsate into application
equipment or a mix tank or store rinsate for later use or disposal. Repeat this
procedure two more times. Then offer container for recycling, if available, or
puncture and dispose of container in a sanitary landfill, or by incineration.