crop-chem-docs/corpus/bayer/diflexx.md

# Diflexx Herbicide

- **Product class:** herbicide
- **EPA Reg No:** 264-1173
- **Active ingredients:** Diglycolamine salt of 3,6-dichloro-o-anisic acid
- **Source:** https://www.cropscience.bayer.us/crop-protection/herbicide/diflexx-herbicide
- **Label PDF:** https://cs-assets.bayer.com/is/content/bayer/DiFlexx1v_Labelpdf

---

4.50”
4.25”
7.75”
7.50”
COPY AREA
COPY AREA
Net
Contents:
2.5 Gallons
GROUP 4 HERBICIDE
Herbicide
SMARTLINE US84114693E (191223E) LABMC DIFLEXX 2.5 GAL ETL      colors: cmyk  1/10/20
US84114693E            191223E    01/20
A Herbicide for weed control in field corn grown for grain, seed and silage,
popcorn, and for fallow croplands.
ACTIVE INGREDIENT:
Diglycolamine salt of 3,6-dichloro-o-anisic acid* . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56.60%
OTHER INGREDIENTS: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43.40%
TOTAL 100.00%
*Contains 38.4% 3,6-dichloro-o-anisic acid (4 pounds acid equivalent per gallon
or 480 grams per liter).
EPA Reg. No. 264-1173
KEEP OUT OF REACH OF CHILDREN
CAUTION
For MEDICAL and TRANSPORTATION Emergencies ONLY
Call 24 Hours a Day 1-800-334-7577
For PRODUCT USE Information Call 1-866-99BAYER (1-866-992-2937)
See Panel for First Aid Instructions and Booklet for Complete Precautionary Statements
and Directions for Use.
Produced for
Bayer CropScience LP
800 N. Lindbergh Blvd.
St. Louis, MO 63167

1
4.50”
4.0625”
7.75”
7.375”
COPY AREA
COPY AREA
FIRST AID
If in eyes: • Hold eye open and rinse slowly and gently with water for
15 - 20 minutes.
• Remove contact lenses, if present, after the  first 5 minutes,
then continue rinsing eye.
• Call a poison control center or doctor for treatment advice.
If swallowed: • Call a poison control center or doctor immediately for treatment
advice.
• Have person sip a glass of water if able to swallow.
• Do not induce vomiting unless told to do so by a poison control
center or doctor.
• Do not give anything to an unconscious person.
If on skin or
clothing:
• Take off contaminated clothing.
• Rinse skin immediately with plenty of water for 15-20 minutes.
• Call a poison control center or doctor for treatment advice.
In case of emergency, call the toll-free Bayer CropScience
Emergency Response telephone number: 1-800-334-7577.
Have a product container or label with you when calling a poison control center
or doctor, or going for treatment.
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION
• Causes moderate eye irritation.
• Harmful if swallowed or absorbed through skin.
• Avoid contact with skin, eyes or clothing.
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Some materials that are chemical-resistant to this product are nitrile rubber and
butyl rubber. If you want more options, follow the instructions for Category C on an
EPA chemical-resistance category selection chart.
All mixers, loaders, applicators and other handlers must wear:
•  Long-sleeved shirt and long pants;
• Chemical-resistant gloves (except for pilots);
• Shoes plus socks.
See Engineering Controls Statement for additional requirements.
USER SAFETY REQUIREMENTS
Follow manufacturer’s instructions for cleaning/maintaining PPE.  If no such
instructions for washables exist, use detergent and hot water.  Keep and wash
PPE separately from other laundry.
USER SAFETY RECOMMENDATIONS
• Users should wash hands before eating, drinking, chewing gum, using tobacco or
using the toilet.
• Users should remove clothing/PPE immediately if pesticide gets inside. Then
wash thoroughly and put on clean clothing.
• Users should remove PPE immediately after handling this product.  Wash the
outside of gloves before removing. As soon as possible, wash thoroughly and
change into clean clothing.
ENGINEERING CONTROLS
When handlers use closed systems, or enclosed cabs in a manner that meets
the requirements listed in the Worker Protection Standard (WPS) for agricultural
pesticides [40 CFR 170.240(d)(4-6)], the handler PPE requirements may be
reduced or modified as specified in the WPS.

2
4.50”
4.0625”
7.75”
7.375”
COPY AREA
COPY AREA
ENVIRONMENTAL HAZARDS
Do not apply directly to water, or to areas where surface water is present or to
intertidal areas below the mean high water mark. Do not contaminate water when
disposing of equipment washwaters or rinsate. Apply this product only as directed
on the label.
This chemical is known to leach through soil into ground water under certain
conditions as a result of agricultural use. Use of this chemical in areas where soils
are permeable, particularly where the water table is shallow, may result in ground
water contamination.
Movement by surface runoff or through soil
Do not apply under conditions which favor runoff. Do not apply to impervious
substrates such as paved or highly compacted surfaces in areas with high potential
for ground water contamination. Ground water contamination may occur in areas
where soils are permeable or coarse and ground water is near the surface. Do not
apply to soils classified as sand with less than 3% organic matter and where ground
water depth is shallow. To minimize the possibility of ground water contamination,
carefully follow application rate recommendations as affected by soil type in the
general information section of this label.
Movement by water erosion of treated soil
Do not apply or incorporate this product through any type of irrigation equipment nor
by flood or furrow irrigation. Ensure treated areas have received at least one-half
inch rainfall (or irrigation) before using tailwater for subsequent irrigation of other
fields.
Point source contamination
To prevent point source contamination, do not mix or load this pesticide product
within 50 feet of wells (including abandoned wells and drainage wells), sink holes,
perennial or intermittent streams and rivers, and natural or impounded lakes and
reservoirs. Do not apply pesticide product within 50 feet of wells. This setback does
not apply to properly capped or plugged abandoned wells and does not apply to
impervious pad or properly diked mixing/loading areas as described below. Mixing,
loading, rinsing, or washing operations performed within 50 feet of a well are
allowed only when conducted on an impervious pad constructed to withstand the
weight of the heaviest load that may be on or move across the pad. The pad must be
self-contained to prevent surface water flow over or from the pad. The pad capacity
must be maintained at 110% that of the largest pesticide container or application
equipment used on the pad and have sufficient capacity to contain all product
spills, equipment or container leaks, equipment wash waters, and rainwater that
may fall on the pad. The containment capacity does not apply to vehicles delivering
pesticide shipments to the mixing/loading site. States may have in effect additional
requirements regarding wellhead setbacks and operational containment.
Care must be taken when using this product to prevent: a) back siphoning into wells,
b) spills or c) improper disposal of excess pesticide, spray mixtures or rinsates.
Check valves or antisiphoning devices must be used on all mixing equipment.
Endangered Species Concerns
The use of any pesticide in a manner that may kill or otherwise harm an endangered
species or adversely modify their habitat is a violation of federal law.
CONDITIONS OF SALE AND LIMITATIONS OF WARRANTY
AND LIABILITY
Read the entire Directions for Use, Conditions, Disclaimer of Warranties and
Limitations of Liability before using this product.  If terms are not acceptable, return
the unopened product container at once.
By using this product, user or buyer accepts the following Conditions, Disclaimer
of Warranties and Limitations of Liability.

3
4.50”
4.0625”
7.75”
7.375”
COPY AREA
COPY AREA
CONDITIONS: The directions for use of this product are believed to be adequate
and must be followed carefully. However, it is impossible to eliminate all risks
associated with the use of this product.  Crop injury, ineffectiveness or other
unintended consequences may result because of such factors as weather
conditions, presence of other materials, or the manner of use or application, all of
which are beyond the control of Bayer CropScience.  To the extent consistent with
applicable law, all such risks shall be assumed by the user or buyer.
DISCLAIMER OF WARRANTIES: TO THE EXTENT CONSISTENT WITH
APPLICABLE LAW, BAYER CROPSCIENCE MAKES NO OTHER WARRANTIES,
EXPRESS OR IMPLIED, OF MERCHANTABILITY OR OF FITNESS FOR A
PARTICULAR PURPOSE OR OTHERWISE, THAT EXTEND BEYOND THE
STATEMENTS MADE ON THIS LABEL. No agent of Bayer CropScience is
authorized to make any warranties beyond those contained herein or to modify the
warranties contained herein. TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, BAYER CROPSCIENCE DISCLAIMS ANY LIABILITY WHATSOEVER FOR
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE USE OR HANDLING OF THIS PRODUCT.
LIMITATIONS OF LIABILITY: TO THE EXTENT CONSISTENT WITH
APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER OR BUYER FOR
ANY AND ALL LOSSES, INJURIES OR DAMAGES RESULTING FROM THE USE
OR HANDLING OF THIS PRODUCT, WHETHER IN CONTRACT, WARRANTY,
TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, SHALL NOT
EXCEED THE PURCHASE PRICE PAID, OR AT BAYER CROPSCIENCE’S
ELECTION, THE REPLACEMENT OF PRODUCT.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent
with its labeling.
Read the entire label before using this product.
Do not apply this product in a way that will contact workers or other persons,
either directly or through drift. Only protected handlers may be in the area during
application. For any requirements specific to your State or Tribe, consult the
agency responsible for pesticide regulation.
For Important crop safety information, refer to the Use Directions section
under the specific crop.
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection
Standard, 40 CFR part 170. This Standard contains requirements for the protection
of agricultural workers on farms, forests, nurseries, and greenhouses and handlers
of agricultural pesticides. It contains requirements for training, decontamination,
and emergency assistance. It also contains specific instructions and exceptions
pertaining to the statements on this label about personal protective equipment (PPE),
notification to workers, and restricted-entry interval. The requirements in this box only
apply to uses of this product that are covered by the Worker Protection Standard.
Do not enter or allow worker entry into treated areas during the restricted entry
interval (REI) of 24 hours.
PPE required for early entry to treated areas (that is permitted under the
Worker Protection Standard and that involves contact with anything that has
been treated, such as plants, soil, or water), is:
• Coveralls worn over short-sleeved shirt and short pants
• Chemical-resistant footwear plus socks
• Chemical-resistant gloves made of any waterproof material
• Chemical-resistant headgear for overhead exposure
• Protective eyewear

4
4.50”
4.0625”
7.75”
7.375”
COPY AREA
COPY AREA
PRODUCT INFORMATION
DIFLEXX® Herbicide:
• is a selective herbicide for the control of annual broadleaf weeds and control/
suppression of many biennial and perennial broadleaf weeds in corn (field corn,
field corn grown for silage, white corn, seed corn, popcorn), and fallow croplands.
• is formulated as a suspension concentrate containing 4 pounds acid equivalent
of 3,6-dichloro-o-anisic acid (diglycolamine salt) and the new corn safener
Cyprosulfamide.
• is readily absorbed by leaves, shoots and roots, translocates throughout the plant,
and accumulates in sensitive plant’s growing points.
• controls weeds by affecting cell wall plasticity and nucleic acid metabolism
leading to uncontrolled cell division and growth, ultimately causing vascular tissue
destruction and plant death.
• controls many broadleaf weed species which have developed herbicide resistance
to glyphosate, triazine, PPO, ALS and HPPD chemistries.
APPLICATION INSTRUCTIONS
DIFLEXX Herbicide:
• may be used in either conventional, conservation or no-till crop management systems.
• may be applied to actively growing weeds using either broadcast, band or spot
spray applications
• may be applied using water as a carrier.
• may be applied preplant, preemergence or post emergence.
• may be applied at use rates of 6-64 fl oz/acre depending on crop, weed growth
stages and weeds to be controlled/suppressed.
o General rate information can be found in the APPLICATION RATES section of
this label. Detailed rate information by crop can be found  in the SPECIFIC USE
DIRECTIONS section of this label.
• may be tank mixed with adjuvants (refer to Spray Additives section of this label).
• must be applied in a manner which minimizes/avoids herbicide drift to sensitive plants.
o using  coarse sprays (volume median diameter of 400 microns or more).  Select
nozzles that are designed to produce minimal amounts of fine spray particles
(less than 200 microns).
o keeping spray pressure at or below 20 psi and spray volume at or above 20
gallons per acre (for ground broadcast applications), unless otherwise required
by the manufacturer of drift-reducing nozzles.  Consult your spray nozzle
supplier concerning the choice of drift-reducing nozzles.
o using agriculturally-approved drift reducing additives.
• must be applied in a manner such that weeds are thoroughly covered with spray.
Ground Application (Banding)
When applying DIFLEXX Herbicide by banding, determine the amount of herbicide
and water volume needed using the following formula:
band width (inches)
row width (inches)
X broadcast rate per acre = banding rate per acre
band width (inches)
row width (inches)
X broadcast spray volume = banding spray volume
              per acre                        per acre
Ground Application (Broadcast)
• Ground application equipment must be properly maintained and calibrated using
the appropriate carriers and spray additives.
• Use 3 - 50 gallons of spray solution per broadcast acre for optimal performance.
Use the higher spray volume when treating dense or tall vegetation.

5
4.50”
4.0625”
7.75”
7.375”
COPY AREA
COPY AREA
• Select nozzles designed to produce minimal amounts of fine spray particles.
Spray with nozzles as close to the weeds as is practical for good weed coverage.
• Avoid spraying when conditions favor drift beyond the intended application area.
Spray Additives
DIFLEXX Herbicide is a suspension concentrate. To improve post emergence
weed control, agriculturally approved surfactants may be added, particularly in
dry growing conditions.
Additive Products And Rates
Adjuvant
NIS (Nonionic Surfactant)  (0.25% v/v or 1 qt/100 gallons)
COC (1.0% v/v or 1 gal/100 gallons)
MSO (1.0% v/v or 1 gal/100 gallons)
USE RESTRICTIONS
•	 Maximum Seasonal Use Rate: 24 - 64 fluid ounces per acre per year.  Refer to
the SPECIFIC USE DIRECTIONS section for each crop for detailed information.
•	 Preharvest Interval (PHI): Refer to the SPECIFIC USE DIRECTIONS section
for each crop for detailed information.
•	 Restricted-Entry Interval (REI): 24 hours.
•	 DO NOT apply to crops under stress due to lack of moisture, hail damage,
flooding, herbicide damage, mechanical injury, insects or widely fluctuating
temperatures as injury may result.
•	 DO NOT apply through any type of irrigation equipment.
•	 DO NOT treat irrigation ditches or water used for crop irrigation or domestic
purposes.
Refer to the specific use directions and restrictions in each Crop, Crop Group or
Crop Subgroup table.
USE PRECAUTIONS
•	 Uneven Spray Coverage: To avoid uneven spray coverage, DIFLEXX
Herbicide should not be applied during periods of gusty wind or when wind is in
excess of 15 mph.
•	 Off-Target Movement: DIFLEXX Herbicide may cause injury to desirable trees
and plants, particularly beans, cotton, flowers, fruit trees, grapes, ornamentals,
peas, potatoes, soybeans, sunflowers, tobacco, tomatoes, and other broadleaf
plants when contacting their roots, stems or foliage.  These plants are most
sensitive to DIFLEXX Herbicide during their development or growing stage.
•	 Disturbing Soil After Application: Disturbing DIFLEXX Herbicide (e.g. tillage
or cultivating) treated areas within 7 days following an application may reduce
herbicide uptake, translocation and weed control.
•	 Rainfast Period: Rainfall or irrigation occurring within 4 hours after post
emergence applications may reduce the effectiveness of DIFLEXX Herbicide.
RESISTANCE MANAGEMENT
This product is a Group 4 herbicide.  A given weed population may contain or
develop resistance to a herbicide after repeated use.  Appropriate resistance-
management strategies should be followed to mitigate or delay resistance.  The
following Integrated Weed Management Techniques are effective in reducing
problems with herbicide resistant weed biotypes.  It is best to use multiple practices
to manage or delay resistance, as no single strategy is likely to be totally effective.
•	 Rotate crops. Crop rotation diversifies weed management.

6
4.50”
4.0625”
7.75”
7.375”
COPY AREA
COPY AREA
•	 Rotate herbicide-tolerant traits. Alternate herbicide-tolerant (HT) traits and/or
use HT trait stacks for more efficient rotation.
•	 Use multiple herbicide sites of action. Use tank mix partners and multiple
SOAs during both the growing season and from year to year to reduce the
selection pressure of a single SOA.
•	 Know your weeds, know your fields. Closely monitor problematic areas with
difficult-to-control weeds or dense weed populations.
•	 Start with clean fields. Effective tillage or the use of a burndown herbicide
program can control emerged weeds prior to planting.
•	 Stay clean – use residual herbicides. Regardless of tillage system, pre-
emergence or early post-emergence soil-applied residual herbicides should be
used when possible.
•	 Apply herbicides correctly. Ensure proper application, including timing, full
use-rates and appropriate spray volumes.
•	 Control weed escapes. Consider spot herbicide applications, row wicking,
cultivation or hand removal of weeds or other techniques to stop weed seed
production and improve weed management.
•	 Zero tolerance – reduce the seed bank. Do not allow surviving weeds to set
seed, which will help decrease weed populations from year to year and prevent
major weed shifts.
•	 Clean equipment. Prevent the spread of herbicide-resistant weeds and their
seeds.
Contact your local extension specialist, certified crop advisory and /or Bayer
CropScience representative (1-844-RRXtend) for additional resistance
management or IPM recommendation.  Also for more information on Weed
Resistance Management, visit the Herbicide Resistance Action Committee (HRAC)
on the web at http://www.hracglobal.com.
SPRAY DRIFT MANAGEMENT
Avoiding spray drift at the application site is the responsibility of the applicator.  The
interaction of many equipment and weather related factors determine the potential
for spray drift.  The applicator and the grower are responsible for considering all
these factors when making decisions.
Where states have more stringent regulations, they must be observed.
The applicator should be familiar with and take into account the information covered
in the following Drift Reduction Advisory. [This information is advisory in nature and
does not supersede mandatory label requirements.]
Drift Reduction Advisory
Information on Droplet Size
The most effective way to reduce drift potential is to apply large droplets.  The best
drift management strategy is to apply the largest droplets that provide sufficient
coverage and control.  Applying larger droplets reduces drift potential, but will not
prevent drift if applications are made improperly, or under unfavorable environmental
conditions (see Wind, Temperature and Humidity, and Temperature Inversions).
Controlling Droplet Size
•	 Volume – Use high flow rate nozzles to apply the highest practical spray volume.
Nozzles with higher rated flows produce larger droplets.
•	 Pressure – Do not exceed the nozzle manufacturer’s recommended pressures.
For many nozzle types, lower pressure produces larger droplets.  When higher
flow rates are needed, use higher flow rate nozzles instead of increasing pressure.
•	 Number of Nozzles – Use the minimum number of nozzles that provide uniform
coverage.

7
4.50”
4.0625”
7.75”
7.375”
COPY AREA
COPY AREA
•	 Nozzle Orientation – Orienting nozzles so that the spray is released parallel
to the air stream produces larger droplets than other orientations and is the
recommended practice.  Significant deflection from horizontal will reduce droplet
size and increase drift potential.
•	 Nozzle Type - Use a nozzle that is designed for the intended application.  With
most nozzles types, narrower spray angles produce larger droplets.  Consider
using low-drift nozzles.  Solid stream nozzles oriented straight back produce the
largest droplets and the lowest drift.
Temperature and Humidity
When making applications in low relative humidity, set up equipment to produce
larger droplets to compensate for evaporation.  Droplet evaporation is most severe
when conditions are both hot and dry.
Temperature Inversions
Applications should not occur during a local, low level temperature inversion because
drift potential is high.  Temperature inversions restrict vertical air mixing, which
causes small suspended droplets to remain in a concentrated cloud.  This cloud
can move in unpredictable directions due to the light variable winds common during
inversions.  Temperature inversions are characterized by increasing temperatures
with altitude and are common on nights with limited cloud cover and light to no
wind.  They begin to form as the sun sets and often continue into the morning.  Their
presence can be indicated by ground fog: however, if fog is not present, inversions
can also be identified by the movement of the smoke from a ground source. Smoke
that layers and moves laterally in a concentrated cloud (under low wind conditions)
indicates an inversion, while smoke that moves upward and rapidly dissipates
indicates good vertical air mixing.
Wind
Drift potential is lowest between wind speeds of 2 to 10 mph.  However, many
factors, including droplet size and equipment type, determine drift potential at any
given speed.  Application should be avoided below 2 mph due to variable wind
direction and high inversion potential. Note: Local terrain can influence wind
patterns.  Every applicator should be familiar with local wind patterns and how they
affect spray drift.
Sensitive Areas
The pesticide should only be applied when the potential for drift to adjacent areas (e.g.,
residential areas, bodies of water, known habitat for threatened or endangered species,
non-target crops) is minimal (e.g., when wind is blowing away from the sensitive areas).
COMPATIBILITY TESTING AND TANK MIX PARTNERS
Before mixing components, always perform a compatibility jar test. For 20 gallons per
acre spray volume, use 3.3 cups (800 ml) of water.  For other spray volumes, adjust
accordingly.  Only use water from the intended source at the source temperature.  Add
components in the sequence indicated in the Mixing Order Instructions section using 2
teaspoons for each pound or 1 teaspoon for each pint of label rate per acre. Always cap
the jar and invert 10 cycles between component additions. When the components have
all been added to the jar, let the solution stand for 15 minutes.  Evaluate the solution for
uniformity and stability.  The spray solution should not have free oil on the surface, nor
fine particles that precipitate to the bottom, nor thick (clabbered) texture.  If the spray
solution is not compatible, repeat the compatibility test with the addition of a suitable
compatibility agent.  If the solution is then compatible, use the compatibility agent as
directed on its label.  If the solution is still incompatible, DO NOT mix the ingredients in
the same tank.
Unless otherwise prohibited on this label or the label of an intended tank mix product,
DIFLEXX Herbicide may be applied in combinations with any pesticide registered for
the same crop, timing and method of application.  See the SPECIFIC CROP USE
RECOMMENDATIONS section for more details. It is the pesticide user’s responsibility
to ensure that all products are registered for the intended use.  Read and follow the
applicable restrictions, limitations and directions for use on all product labels involved in

8
4.50”
4.0625”
7.75”
7.375”
COPY AREA
COPY AREA
tank mixing.  Users must follow the most restrictive directions for use and precautionary
statements of each product in the tank mixture.
Order of Mixing
DIFLEXX Herbicide may be used with other pesticides, fertilizers, and
micronutrients. The proper mixing procedure for DIFLEXX Herbicide alone or in
tank mix combinations with other pesticides is:
1. Water. Begin by agitating a thoroughly clean sprayer tank three-quarters full of
clean water.
2. Agitation. Maintain constant agitation throughout mixing and application
3. Inductor. If an inductor is used, rinse it thoroughly after each component has
been added.
4. Products in PVA bags.  Place any product contained in water-soluble PVA bags
into the mixing tank.  Wait until all water-soluble PVA bags have been dissolved
and the product is evenly mixed in the spray tank before continuing.
5. Add DIFLEXX Herbicide and other water-dispersible products (dry flowables,
wettable powders, suspension concentrates, or suspoemulsions)
6. Water-soluble products.
7. Emulsifiable concentrates (such as oil concentrate when applicable).
8. Water-soluble additives.
9. Remaining quantity of water.
Maintain constant agitation during application.
Equipment Cleanup Procedures
To avoid injury or exposure to non-target crops, thoroughly clean all mixing and
spray equipment, including pumps, nozzles, lines and screens, by using a strong
detergent or commercial sprayer cleaner according to the manufacturer’s directions,
and then triple rinsing the equipment before and after spraying this product.
ROTATIONAL CROPS
The interval between application and planting rotational crops is given below.
Always exclude counting days when the ground is frozen.  Planting at intervals
less than specified below may result in crop injury.  Moisture is essential for the
degradations of this herbicide in soil.  If dry weather prevails, use cultivation to allow
herbicide contact with moist soil.
• Planting/replanting restrictions for DIFLEXX Herbicide applications of 24
fluid ounces per acre or less: Corn can be replanted immediately following an
application of DIFLEXX Herbicide (care should be taken that corn seed does not
come into direct contact with the herbicide). The rotation interval to soybean varies
by DIFLEXX Herbicide rate.  For DIFLEXX Herbicide rates of 12 fluid ounces per
acre or less, the rotational interval for soybeans is 30 days; for DIFLEXX Herbicide
rates from 13 - 24 fluid ounces per acre, the soybean rotational interval is 60 days.
The rotational interval is 60 days for barley, cotton, oat, sorghum, and wheat and
120 days for all other crops.
• Planting/replanting restrictions for DIFLEXX Herbicide applications of more
than 24 fluid ounces and up to 64 fluid ounces per acre: Corn, sorghum,
cotton (east of Rocky Mountains) and all other crops grown in areas with 30” or
more of annual rainfall may be planted 120 days or more after application. Barley,
oat, wheat and other grass seedlings grown east of the Mississippi River may be
planted 60, 90 and 120 days following DIFLEXX Herbicide application rates of
24-32, 33-48, and 49-64 fluid ounces/acre, respectively.  Barley, oat, wheat and
other grass seedlings grown west of the Mississippi River may be planted 60, 90,
135 and 180 days following DIFLEXX Herbicide application rates of  16, 17-32,
33-48, and 49-64 fluid ounces/acre, respectively.  For all other crops in areas with
less than 30” of annual rainfall, the interval between application and planting is
180 days or more.

9
4.50”
4.0625”
7.75”
7.375”
COPY AREA
COPY AREA
Cover Crops
Use of cover crops as a means of soil improvement, erosion control, weed and/or
insect suppression, etc., following harvest of corn in the Fall is increasing.  Planting
of cover crops in fields treated with DIFLEXX Herbicide is allowed as long as
these cover crops are not grazed by livestock nor harvested for food. Cover crops
are to be tilled under or chemically controlled with burndown herbicides in the
spring.  Many cover crops can be planted within 90-120 days after application of
DIFLEXX Herbicide.  However, all potential cover crops have not been evaluated
for tolerance to DIFLEXX Herbicide and significant injury may occur.  Prior to
seeding a cover crop, complete a successful field/small scale bioassay to provide
an indication of the level of tolerance to the prior DIFLEXX Herbicide application.
Refer to the “Field/Small Scale Bioassay” section.  If used in tank mixtures with
other herbicides, always follow the most restrictive label.
Field/Small Scale Bioassay
A field/small scale bioassay must be completed before rotating to a crop other than
those specified in the Rotational Crop section of this label. To conduct an effective
field bioassay, grow strips of the crop(s) you intend to grow in the following season
in a field previously treated with DIFLEXX Herbicide. The test strip should be placed
in a controlled area and should include low areas and knolls, and include variations
in soil such as type and pH. Crop response to the bioassay will determine if the
crop(s) grown in the test strips can be grown safely in the areas previously treated
with DIFLEXX Herbicide.
For an effective small scale bioassay, collect uniform samples of all soil types
from the DIFLEXX Herbicide-treated field (see example above for types of soil in
the sample) and place the soil into a sturdy container.  Plant the desired cover crop
into the soil, apply water and place the container in a warm sunny area to allow
germination and growth of the crop.  Monitor growth of the cover crop over a three
to four week period. If the crop emerges and grows normally, the risk to establish
and grow the cover crop in the DIFLEXX Herbicide-treated field should be tolerable.
APPLICATION  RATES
DIFLEXX Herbicide will control/suppress many annual, biennial and perennial
broadleaf weeds at rates ranging from 6 to 32 fluid ounces per acre.  Small,
actively growing annual weeds (1-3 inches tall) or small rosette growth stage
biennial weeds (1-3 inch diameter) are generally more easily controlled/
suppressed than larger annual/biennial weeds or perennial weeds. For the list of
weeds                     controlled/suppressed by DIFLEXX Herbicide, refer to the WEEDS
CONTROLLED section of this label. For specific use rates recommendations per
crop, refer to the SPECIFIC USE DIRECTIONS  section of the label.
Weed Type  Growth Stage Rate Per Acre (fl oz)
Annual1 Small actively growing
Established weed growth
6 - 16
16 - 24
Biennial Rosette diameter 1 - 3”
Rosette diameter 3” or more
Bolting
8 - 16
16 - 32
32
Perennial Top growth suppression
Top growth control and root
 suppression
Noted perennials
Other perennials
8 - 16

16 - 32
32
32
1 DIFLEXX Herbicide at rates below 8 fluid ounces per acre will provide control/suppression of certain
broadleaf weeds but should be applied in tank mixture with additional effective postemergence herbicides
for improved weed control.
WEEDS CONTROLLED
DIFLEXX Herbicide will control a broad array of important annual broadleaf weeds,
including biotypes resistant to glyphosate-, triazine- , PPO-, ALS- and HPPD-
inhibiting herbicides.  DIFLEXX Herbicide will also control or suppress many
biennial and perennial broadleaf weeds.

10
4.50”
4.0625”
7.75”
7.375”
COPY AREA
COPY AREA
ANNUAL WEEDS
(Including Glyphosate-, Triazine-, PPO-, ALS- and HPPD-Resistant Biotypes)
Alkanet
Amaranth, Palmer, Powell Spiny
Aster, Slender
Bedstraw, Catchweed
Beggarweed, Florida
Broomweed, Common
Buckwheat, Tartary, Wild
Buffalobur
Burclover, California
Burcucumber
Buttercup, Corn, Creeping,
Roughseed, Western Field
Carpetweed
Catchfly, Nightflowering
Chamomile, Corn
Chervil, Bur
Chickweed, Common
Clovers
Cockle, Corn, Cow, White
Cocklebur, Common
Copperleaf, Hophornbeam
Cornflower (Batchelor button)
Croton, Tropic, Woolly
Daisy, English
Dragonhead, American
Eveningprimrose, Cutleaf
Falseflax, Smallseed
Fleabane, Annual
Flixweed
Fumitory
Goosefoot, Nettleleaf
Hempnettle
Henbit
Jacobs-Ladder
Jimsonweed
Knawel (German Moss)
Knotweed, Prostrate
Kochia
Ladysthumb
Lambsquarters, Common
Lettuce, Miners, Prickly
Mallow, Common, Venice
Marestail (Horseweed)
Mayweed
Morningglory, Ivyleaf, Tall
Mustard, Black, Blue, Tansy,
Treacle, Tumble, wild, Yellowtops
Nightshade, Black, Cutleaf
Pennycress, Field (Fanweed,
Frenchweed, Stinkweed)
Pepperweed, Virginia
  (Peppergrass)
Pigweed, Prostrate, Redroot
(Carelessweed), Rough,
Smooth, Tumble
Pineappleweed
Poorjoe
Poppy, Red-horned
Puncturevine
Purslane, Common
Pusley, Florida
Radish, Wild
Ragweed, Common, Giant
(Buffaloweed), Lance-Leaf
Rocket, London, Yellow
Rubberweed, Bitter (Bitterweed)
Salsify
Senna, Coffee
Sesbania, Hemp
Shepherdspurse
Sicklepod
Sida, Prickly (Teaweed)
Smartweed, Green,
Pennsylvania
Sneezeweed, Bitter
Sowthistle, Annual, Spiny
Spanish Needles
Spikeweed, Common
Spurge, Prostrate, Leafy
Spurry, Corn
Starbur, Bristly
Starwort, Little
Sumpweed, Rough
Sunflower, Common (Wild)
Volunteer
Thistle, Russian
Velvetleaf
Waterhemp
Waterprimrose, Winged
Wormwood
BIENNIAL WEEDS
(Including Glyphosate-, Triazine-, PPO-, ALS- and HPPD-Resistant Biotypes)
Burdock, Common
Carrot, Wild (Queen Anne’s
Lace)
Cockle, White
Eveningprimrose, Common
Geranium, Carolina
Gromwell
Knapweed, Diffuse, Spotted
Mallow, Dwarf
Plantain, Bracted
Ragwort, Tansy
Starthistle, Yellow
Sweetclover
Teasel
Thistle, Bull, Milk, Musk,
Plumeless
PERENNIAL WEEDS
(Including Glyphosate-, Triazine-, PPO-, ALS- and HPPD-Resistant Biotypes)
Alfalfa1
Artichoke, Jerusalem
Aster, Spiny, Whiteheath
Bedstraw, Smooth
Bindweed, Field, Hedge
Blueweed, Texas
Bursage, Woollyleaf1 (Bur
Ragweed, Povertyweed)
Buttercup, Tall
Campion, Bladder
Chickweed, Field, Mouseear
Chicory1
Clover1, Hop
Dandelion1
Dock1, Broadleaf (Bitterdock), Curly
Dogbane, Hemp
Dogfennel1 (Cypressweed)
Fern, Bracken
Garlic, Wild
Goldenrod, Canada, Missouri
Goldenweed, Common
Hawkweed
Henbane, Black1
Horsenettle, Carolina
Ironweed
Knapweed, Black, Diffuse,
Russian1, Spotted
Milkweed, Common, Climbing,
  Honeyvine, Western Whorled
Nettle, Stinging
Nightshade, Silverleaf
(White Horsenettle)
Onion, wild
Plantain, Broadleaf, Buckhorn
Pokeweed
Ragweed, Western
Redvine
Sericea Lespedeza
Smartweed, Swamp
Snakeweed, Broom
Sorrel1, Red (Sheep Sorrel)
Sowthistle1, Perennial
Spurge, Leafy
Sundrop, Halfshrub
Eveningprimrose
Thistle, Canada, Scotch
Toadflax, Dalmation
Tropical Soda Apple
Trumpetcreeper (Buckvine)
Vetch
Violet, Wild
Waterhemlock, Spotted
Waterprimrose, Creeping
Woodsorrel1, Creeping, Yellow
Wormwood, Louisiana, Common
Yankeeweed
Yarrow, Common1
1Noted perennials may be controlled using lower rates of this product than those specified
for other listed perennial weeds.

11
4.50”
4.0625”
7.75”
7.375”
COPY AREA
COPY AREA
SPECIFIC USE DIRECTIONS
CORN (Field, Pop, Seed, and Silage)
USE DIRECTIONS
DIFLEXX Herbicide can be applied pre-plant,  pre-emergence,  and post-emergence
in corn for all tillage systems (e.g. no-tillage, reduced tillage and conventional).
Plant corn at least 1 1/2 inches deep.  Corn seed must be completely covered with
soil and furrow firmed.
In rare instances, applications of  DIFLEXX Herbicide during periods of rapid corn
growth may result in temporary leaning of the crop. Corn will usually become erect
within 3-7 days.  Cultivation should be delayed until after corn is growing normally to
avoid potential stalk breakage.
Before applying DIFLEXX Herbicide to seed corn or popcorn, verify the selectivity of
DIFLEXX Herbicide on the inbred line or hybrid with your local seed corn or popcorn
company (supplier).  This precaution will help avoid potential injury to sensitive lines.
APPLICATION RATE
Do not apply more than 16 fluid ounces  (0.5 lb dicamba ae) per acre per application
and a total of 24 fluid ounces (0.75 lb dicamba ae) per acre per year.  Apply a
maximum of two applications per growing season.   Sequential applications must
be separated by two (2) weeks or more.
Preplant and Preemergence Applications in No Tillage, Reduced Tillage and
Conventional  Corn
Apply from 8 - 16 fluid ounces per acre of DIFLEXX Herbicide. Use the higher rates
in the rate range on soils high in organic matter or under certain weed conditions
(See higher rate recommendations listed under the Post-emergence Application
in All Tillage Systems section.
Post-emergence Application in All Tillage Systems
Apply from 6 - 16 fluid ounces per acre of DIFLEXX Herbicide.  Use higher rates in
this range when one or more of the following situations are present:
•	 Weeds with known resistance (ALS, PPO, glyphosate, triazine, HPPD, etc.) to
herbicides in tank mix with DIFLEXX Herbicide
•	 Weeds not controlled by tank mix partners
•	 Heavy weed populations
•	 Biennial/perennial weeds listed on the label
•	 Annual weeds taller than 6”
DIFLEXX Herbicide at rates below 8 fluid ounces per acre will provide control/
suppression of certain broadleaf weeds but should be applied in tank mixture with
additional effective postemergence herbicides for improved weed control.
APPLICATION TIMING
Preplant and Preemergence Applications in No Tillage, Reduced Tillage and
Conventional  Corn
DIFLEXX Herbicide can be applied up to 14 days before, during or after planting
a corn crop.  DIFLEXX Herbicide will control emerged labeled weeds and provide
residual control of many weeds. When additional residual control is desired, a
tank mixture with residual herbicides such as Corvus ®,  Balance® Flexx, atrazine
or other registered residual herbicides may be used.   COC or MSO  at 1%v/v are
recommended for burndown of labeled weeds  6” or less in height. When weeds
are greater than 6” in height or weeds not controlled by DIFLEXX Herbicide are
present, the addition of a burndown herbicide (e.g., glyphosate) is recommended.
Observe directions for use, precautions and restrictions, and adjuvants on the
label of the residual or burndown  tank mixed herbicides.

12
4.50”
4.0625”
7.75”
7.375”
COPY AREA
COPY AREA
Post-emergence Application in All Tillage Systems
Broadcast Spray Application: Apply DIFLEXX Herbicide as a broadcast spray
when corn is at spike through the V10 stage of growth   (10 leaf collar) or 36” tall,
whichever occurs first. Early post emergence application is recommended for best
weed control (weeds less than 3” tall) and crop yield potential.
TANK MIX INSTRUCTIONS
DIFLEXX Herbicide should be a part of an integrated pest control program that may
include herbicides, insecticides and/or fungicides applied prior to, in tank mix with,
or following a DIFLEXX Herbicide application. When using tank mix or sequential
applications with DIFLEXX Herbicide, always follow the companion product label
to determine specific use rates, application timings and pest controlled.  In addition,
follow precautions and restrictions including state and local use restrictions that
may apply to specific products. It is the pesticide user’s responsibility to ensure that
all products are registered for the intended use.  Read and follow the applicable
restrictions, limitations and directions for use on all product labels involved in tank
mixing.  Users must follow the most restrictive directions for use and precautionary
statements of each product in the tank mixture.
Possible tank mix partners with DIFLEXX Herbicide may include but are not
limited to the following herbicides:
Possible Tank Mix Partners for Additional Weed Control
Autumn™ Super 51WDG Capreno® Glyphosate (Roundup Ready®
corn hybrids only)
Balance® Flexx Corvus® Laudis®
Tank Mixtures for Disease Control
To provide weed and disease control in corn, possible sequential or tank mix
partners with DIFLEXX Herbicide may include but are not limited to the following
fungicides:
 Prosaro®, Stratego® YLD
Tank Mixtures for Insect Control
To provide weed and insect control in corn, DIFLEXX Herbicide may be used
sequentially with all soil-applied insecticides or used sequentially or in tank mix
with most foliar-applied insecticides including Baythroid® XL, Oberon®,  and other
registered foliar insecticides.   DO NOT apply DIFLEXX Herbicide in tank mixtures
with Lorsban® /chlorpyrifos insecticide.  If DIFLEXX Herbicide is used sequentially
with foliar insecticides, applications should be separated by at least 7 days.
RESTRICTIONS FOR USE
•	 Do Not use on sweet corn.
•	 Do Not apply more than 16 fluid ounces per acre per application  and a total of
24 fluid ounces per acre per year.
•	 Do Not use sprayable fluid fertilizer as the carrier for application of DIFLEXX
Herbicide made after corn emergence.
•	 Do Not apply DIFLEXX Herbicide when soybeans are growing nearby if any of
these conditions exist:
o Corn is more than 24” tall
o Soybean are more than 10” tall
o Soybean have begun to bloom
•	 Preharvest Interval: Corn forage may not be harvested within 45 days of the
final DIFLEXX Herbicide application.  Corn grain and stover may be harvested
once the crop has reached the ensilage (milk) stage.

13
4.50”
4.0625”
7.75”
7.375”
COPY AREA
COPY AREA
FALLOW (BETWEEN CROP APPLICATIONS)
USE DIRECTIONS
DIFLEXX Herbicide can be applied either postharvest in the fall, spring, or summer
during the fallow period or to crop stubble/set-aside acres.  Apply DIFLEXX
Herbicide as a broadcast or spot treatment to emerged and actively growing
weeds after the crop harvest (postharvest) and before a killing frost or in the fallow
cropland or crop stubble the following spring or summer.
See the  ROTATIONAL CROP section of the label for the required interval between
application and planting to prevent crop injury.
APPLICATION RATE
Apply 4 - 32 fluid ounces of DIFLEXX Herbicide per acre. Refer to the APPLICATION
RATES and WEEDS CONTROLLED sections of this label to determine use rates
for specific targeted weed species.
APPLICATION TIMING
For best performance, apply DIFLEXX Herbicide when annual weeds are less
than 3” tall, when biennial weeds are in the rosette stage and to perennial weed
regrowth in late summer or fall following a mowing or tillage treatment.  The most
effective control of upright perennial broadleaf weeds such as Canada thistle and
Jerusalem artichoke occurs if DIFLEXX Herbicide is applied when the majority
of weeds have at least 4” - 6” regrowth or for weeds such as field bindweed and
hedge bindweed that are in or beyond the full bloom stage.
Avoid disturbing treated areas following application.  Treatments may not kill
weeds that develop from seed or underground plant parts such as rhizomes or
bulblets, after the effective period for DIFLEXX Herbicide.  For seedling control, a
follow-up program or other cultural practices could be instituted.
TANK MIX INSTRUCTIONS
DIFLEXX Herbicide should be a part of an integrated weed control program that
may include herbicides applied prior to, in tank mix with, or following a DIFLEXX
Herbicide application. When using tank mix or sequential applications with DIFLEXX
Herbicide, always follow the companion product label to determine specific use
rates by soil type, weed species, and weed or crop growth stage.  In addition,
follow precautions and restrictions including state and local use restrictions that
may apply to specific products. It is the pesticide user’s responsibility to ensure that
all products are registered for the intended use.  Read and follow the applicable
restrictions, limitations and directions for use on all product labels involved in tank
mixing.  Users must follow the most restrictive directions for use and precautionary
statements of each product in the tank mixture.
DIFLEXX Herbicide should be a part of an integrated weed control program. In
tank mixes with one or more herbicides, apply 4-16 fluid ounces of DIFLEXX
Herbicide per acre for control of annual weeds, or 16-32 fluid ounces of DIFLEXX
Herbicide for control of biennial and perennial weeds. These products may include
but are not limited to the following herbicides:
Possible Tank Mix Partners for Additional Weed Control
Atrazine Corvus® Laudis® 2,4-D
Autumn™ Super 51WDG Glyphosate Metribuzin
RESTRICTIONS FOR USE
•	 Do not apply more than 32 fluid ounce (1 lb dicamba ae) per acre per application
and a total of 64 fluid ounces (2 lb dicamba ae) per acre per year.
STORAGE AND DISPOSAL
Do not contaminate water, food, or feed by storage or disposal. Open dumping is
prohibited. This product may not be mixed, loaded, or used within 50 feet of all wells
including abandoned wells, drainage wells, and sinkholes.

14
4.50”
4.0625”
7.75”
7.375”
COPY AREA
COPY AREA
Pesticide storage
Groundwater contamination may be reduced by diking and flooring of permanent
liquid bulk storage sites with an impermeable material. Store in original container in
a well-ventilated area separately from fertilizer, feed, and foodstuffs. Avoid cross-
contamination with other pesticides.
Pesticide disposal
Wastes resulting from this product may be disposed of on site or at an approved
waste disposal facility. Pesticide, spray mixture, or rinsate that cannot be used
according to label instructions must be disposed of according to federal, state, or
local procedures under Subtitle C of the Resource Conservation and Recovery
Act. Improper disposal of excess pesticide, spray mix, or rinsate is a violation of
federal law.
Container handling
Nonrefillable Container. DO NOT reuse or refill this container. Triple rinse or
pressure rinse container (or equivalent) promptly after emptying; then offer for
recycling, if available, or reconditioning, if appropriate, or puncture and dispose of
in a sanitary landfill, or by incineration, or by other procedures approved by state
and local authorities.
Triple rinse containers small enough to shake (capacity < 5 gallons) as follows:
Empty the remaining contents into application equipment or a mix tank and drain
for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water
and recap. Shake for 10 seconds. Pour rinsate into application equipment or a
mix tank, or store rinsate for later use or disposal. Drain for 10 seconds after the
flow begins to drip. Repeat this procedure two more times.
Triple rinse containers too large to shake (capacity > 5 gallons) as follows: Empty
the remaining contents into application equipment or a mix tank. Fill the container
1/4 full with water. Replace and tighten closures. Tip container on its side and roll
it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand
the container on its end and tip it back and forth several times. Empty the rinsate
into application equipment or a mix tank, or store rinsate for later use or disposal.
Repeat this procedure two more times.
Pressure rinse as follows: Empty the remaining contents into application
equipment or mix tank. Hold container upside down over application equipment or
mix tank, or collect rinsate for later use or disposal. Insert pressure rinsing nozzle
in the side of the container and rinse at about 40 PSI for at least 30 seconds.
Drain for 10 seconds after the flow begins to drip.
Refillable Container. Refill this container with pesticide only. DO NOT reuse this
container for any other purpose. Triple rinsing the container before final disposal
is the responsibility of the person disposing of the container. Cleaning before
refilling is the responsibility of the refiller.
Triple rinse as follows: To clean the container before final disposal, empty the
remaining contents from this container into application equipment or mix tank. Fill
the container about 10% full with water. Agitate vigorously or recirculate water
with the pump for 2 minutes. Pour or pump rinsate into application equipment or
rinsate collection system. Repeat this rinsing procedure two more times. When
this container is empty, replace the cap and seal all openings that have been
opened during use; return the container to the point of purchase or to a designated
location. This container must only be refilled with a pesticide product. DO NOT
reuse the container for any other purpose. Prior to refilling, inspect carefully for
damage such as cracks, punctures, abrasions, worn-out threads and closure
devices. Check for leaks after refilling and before transport. DO NOT transport
if this container is damaged or leaking. If the container is damaged, or leaking,
or obsolete and not returned to the point of purchase or to a designated location,
triple rinse emptied container and offer for recycling, if available, or dispose of
container in compliance with state and local regulations.

15
4.50”
4.0625”
7.75”
7.375”
COPY AREA
COPY AREA
Autumn™ is a trademark of Bayer CropScience LP.
Balance®, Baythroid ®, Corvus ®, DIFLEXX ®, Laudis ®, Oberon ®, Prosaro ® and
Stratego® are registered trademarks of Bayer CropScience LP.
Lorsban® is a registered trademark of Dow AgroSciences.

PLACE BAR CODE HERE
5.50”
BASE LABEL
4.125”0.875” 0.50”
7.75”
7.50”
COPY AREA
COPY AREA
GROUP 4 HERBICIDE
(01)  0 0785740 23663  5 NET CONTENTS: 2 1/2 GALLONS
STORAGE AND DISPOSAL
Do not contaminate water, food, or feed by storage or
disposal. Open dumping is prohibited. This product
may not be mixed, loaded, or used within 50 feet of
all wells including abandoned wells, drainage wells,
and sinkholes.
Pesticide storage
Groundwater contamination may be reduced by diking
and flooring of permanent liquid bulk storage sites with
an impermeable material. Store in original container in
a well-ventilated area separately from fertilizer, feed,
and foodstuffs. Avoid cross-contamination with other
pesticides.
Pesticide disposal
Wastes resulting from this product may be disposed
of on site or at an approved waste disposal facility.
Pesticide, spray mixture, or rinsate that cannot be
used according to label instructions must be disposed
of according to federal, state, or local procedures
under Subtitle C of the Resource Conservation and
Recovery Act. Improper disposal of excess pesticide,
spray mix, or rinsate is a violation of federal law.
Container handling
Nonrefillable Container. DO NOT reuse or refill this
container. Triple rinse or pressure rinse container
(or equivalent) promptly after emptying; then
offer for recycling, if available, or reconditioning, if
appropriate, or puncture and dispose of in a sanitary
landfill, or by incineration, or by other procedures
approved by state and local authorities.
Triple rinse containers small enough to shake
(capacity < 5 gallons) as follows: Empty the
remaining contents into application equipment or
a mix tank and drain for 10 seconds after the flow
begins to drip. Fill the container 1/4 full with water
and recap. Shake for 10 seconds. Pour rinsate into
application equipment or a mix tank, or store rinsate
for later use or disposal. Drain for 10 seconds after
the flow begins to drip. Repeat this procedure two
more times.
Bayer CropScience LP
800 N. Lindbergh Blvd.
St. Louis, MO 63167
DIFLEXX is a registered trademark of Bayer.
©2020 Bayer CropScience
US84114693E            191223E    01/20
FIRST AID
If in eyes: • Hold eye open and rinse slowly
and gently with water for 15 - 20
minutes.
• Remove contact lenses, if
present, after the first 5 minutes,
then continue rinsing eye.
• Call a poison control center or
doctor for treatment advice.
If swallowed: • Call a poison control center or
doctor immediately for treatment
advice.
• Have person sip a glass of water
if able to swallow.
• Do not induce vomiting unless
told to do so by a poison control
center or doctor.
• Do not give anything to an
unconscious person.
If on skin or
clothing:
• Take off contaminated clothing.
• Rinse skin immediately with
plenty of water for 15-20 minutes.
• Call a poison control center or
doctor for treatment advice.
In case of emergency, call the toll-free
Bayer CropScience Emergency Response
telephone number: 1-800-334-7577.
Have a product container or label with you
when calling a poison control center or doctor,
or going for treatment.
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC
ANIMALS
CAUTION
• Causes moderate eye irritation.
• Harmful if swallowed or absorbed through skin.
• Avoid contact with skin, eyes or clothing.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product
in a manner inconsistent with its labeling.
Read the entire label before using this product.
DIFLEXX® Herbicide
A Herbicide for weed control in field corn grown for grain, seed and silage, popcorn, and for fallow
croplands.
ACTIVE INGREDIENT:
Diglycolamine salt of 3,6-dichloro-o-anisic acid*  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  56.60%
OTHER INGREDIENTS: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  43.40%
TOTAL                                                                                                                                                  100.00%
*Contains 38.4% 3,6-dichloro-o-anisic acid (4 pounds acid equivalent per gallon or 480 grams per liter).
EPA Reg. No. 264-1173
KEEP OUT OF REACH OF CHILDREN
CAUTION
For MEDICAL and TRANSPORTATION Emergencies ONLY Call 24 Hours a Day 1-800-334-7577
For PRODUCT USE Information Call 1-866-99BAYER (1-866-992-2937)
See Panel for First Aid Instructions and Booklet for Complete Precautionary Statements and Directions for Use.