crop-chem-docs/corpus/bayer/roundup-weathermax.md

# Roundup WeatherMAX Herbicide

- **Product class:** herbicide
- **EPA Reg No:** 524-537-ZA
- **Active ingredients:** Glyphosate, N-(phosphonomethyl)glycine,in the form of its potassium salt
- **Source:** https://www.cropscience.bayer.us/crop-protection/herbicide/roundup-weathermax-herbicide
- **Label PDF:** https://cs-assets.bayer.com/is/content/bayer/Roundup_WeatherMAX1dp_Herbicide_Bayer_Labelpdf

---

US62218892C (161018Cv4)  Roundup WeatherMax      NET CONTENTS 2.5 GAL ECL
Colors: Die: Cyan  Artwork: PMS 1595, 369, Pantone Cool Gray 9, Black     Label Coordinator: Bradley DeBlanc     10/06/2021
Complete Directions for Use
Herbicide for Roundup Ready® Crops
Selective broad-spectrum weed control in Roundup Ready® crops
Non-selective, broad-spectrum weed control for many agricultural systems and farmsteads
ACTIVE INGREDIENT:
*Glyphosate, N-(phosphonomethyl) glycine, in the form of its potassium salt .............................. 48.8%
OTHER INGREDIENTS: ................................................................................................................ 51.2%
 ................................................................................................................................................. 100.0%
*Contains 660 grams of the active ingredient glyphosate, in the form of its potassium salt, per liter or
5.5 pounds per U.S. gallon, which is equivalent to 540 grams of the acid, glyphosate, per liter or
4.5 pounds per U.S. gallon (39.8% by weight).
Keep out of reach of children
CAUTION
See inside for additional Precautions.
Not all products listed on this label are registered for use in California. Check the registration status of
each product in California before using.
THIS IS AN END-USE PRODUCT. BAYER CROPSCIENCE LP DOES NOT INTEND AND HAS NOT REGISTERED
IT FOR REFORMULATION OR REPACKAGING.
FOR PRODUCT INFORMATION OR ASSISTANCE USING THIS PRODUCT,
CALL TOLL-FREE, 1-866-99BAYER (1-866-992-2937).
IN CASE OF AN EMERGENCY INVOLVING THIS HERBICIDE PRODUCT,
OR FOR MEDICAL ASSISTANCE, CALL COLLECT, DAY OR NIGHT, 1-800-334-7577.
EPA Reg. No. 524-537
EPA Est. No. 524-IA-1
Packed For:
BAYER CROPSCIENCE LP
800 N. LINDBERGH BLVD.
ST. LOUIS, MISSOURI, 63167 U.S.A.
©2021 Bayer Group. All rights reserved.
US62218892C      161018Cv4      09/21
NET 2.5 GAL

AVOID CONTACT OF THIS HERBICIDE WITH FOLIAGE, GREEN STEMS, EXPOSED
NON-WOODY ROOTS OR FRUIT OF CROPS DESIRABLE PLANTS AND TREES,
EXCEPT AS DIRECTED FOR USE ON ROUNDUP READY® CROPS, AS SEVERE PLANT
INJURY OR DESTRUCTION COULD RESULT.
Read the entire label before using this product.
Use only according to label directions.
Read the “LIMIT OF WARRANTY AND LIABILITY” statement at the end of this
labeling before buying or using. If terms are not acceptable, return at once
unopened.
CONTENTS
1 1.0 INGREDIENTS  .................................. 1
2 2.0 IMPORTANT PHONE NUMBERS  .................... 1
3 3.0 PRECAUTIONARY STATEMENTS  .................... 1
 3.1 Hazards to Humans and Domestic Animals ............ 1
 3.2 Environmental Hazards ........................... 1
 3.3 Physical or Chemical Hazards ...................... 1
4 4.0 STORAGE AND DISPOSAL  ......................... 2
5 5.0 PRODUCT INFORMATION  ......................... 2
6 6.0  WEED RESISTANCE MANAGEMENT .................. 2
 6.1 Weed Management Practices ....................... 2
 6.2 Management of Glyphosate-Resistant Biotypes ......... 2
7 7.0 MIXING  ...................................... 3
 7.1 Mixing with Water................................ 3
 7.2 Tank Mixtures................................... 3
 7.3 Tank-Mixing Procedure............................ 3
 7.4 Mixing Spray Solution Concentrations................. 3
 7.5 Ammonium Sulfate............................... 3
 7.6 Colorants and Dyes .............................. 3
 7.7  Drift Reduction Additives .......................... 3
8 8.0 APPLICATION EQUIPMENT AND TECHNIQUES ......... 3
 8.1 Spray Drift Management........................... 3
 8.2 Aerial Application Equipment . . . . . . . . . . . . . . . . . . . . . . . 3
 8.3 Ground Application Equipment ...................... 5
 8.4 Handheld Sprayers............................... 5
 8.5 Selective Application Equipment .................... 5
 8.6 Injection Systems................................ 5
 8.7 Controlled Droplet Applicator (CDA) .................. 5
9 9.0 ANNUAL AND PERENNIAL CROPS ................... 5
 9.1 Cereal and Grain Crops ........................... 6
 9.2 Corn ...................................... 6
 9.3 Cotton ...................................... 7
 9.4 Fallow Systems ................................. 7
 9.5 Grain Sorghum (Milo)............................. 7
 9.6 Herbs and Spices................................ 7
 9.7 Oilseed Crops................................... 8
 9.8 Soybean ...................................... 8
 9.9 Sugarcane  ..................................... 8
 9.10 Vegetable Crops ................................. 9
 9.11 Miscellaneous Crops ............................ 10
10 10.0 TREE, VINE AND SHRUB CROPS ................... 10
 10.1 Berry and Small Fruit Crops . . . . . . . . . . . . . . . . . . . . . . . 11
 10.2 Citrus Fruit Crops............................... 11
 10.3 Pome Fruit Crops ............................... 11
 10.4 Stone Fruit Crops ............................... 11
 10.5 Tree Nut Crops................................. 11
 10.6 Tropical and Subtropical Trees and Fruit Crops......... 11
 10.7 Vine Crops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
 10.8 Miscellaneous Tree Food Crops .................... 12
 10.9 Non-Food Tree Crops ............................ 12
11 11.0 PASTURE GRASSES, FORAGE LEGUMES AND RANGELAND . . .12
 11.1 Alfalfa, Clover and Other Forage Legumes ............ 12
 11.2 Conservation Reserve Program (CRP)................ 12
 11.3 Grass Seed and Sod Production . . . . . . . . . . . . . . . . . . . . 12
 11.4 Pastures ..................................... 13
 11.5 Rangeland  .................................... 13
12 12.0 ROUNDUP READY CROPS ........................ 13
 12.1 Roundup Ready Alfalfa........................... 14
 12.2 Roundup Ready Canola (Spring Varieties)............. 14
 12.3 Roundup Ready Canola (Winter Varieties)............. 15
 12.4  TruFlex Roundup Ready Canola (Spring Varieties)....... 15
 12.5 Field Corn Hybrids with Roundup Ready 2 Technology.... 15
 12.6 Sweet Corn Hybrids with Roundup Ready 2 Technology... 16
 12.7 Roundup Ready Cotton........................... 16
 12.8 Roundup Ready Flex Cotton ....................... 17
 12.9 Roundup Ready Soybean ......................... 18
 12.10 Roundup Ready 2 Yield® Soybean................... 18
 12.11 Roundup Ready Sugarbeet ........................ 19
13 13.0 FARMSTEAD USE ............................... 19
 13.1 Farmstead Weed Control, Trim-and-Edge............. 19
 13.2 Greenhouse/Shadehouse  . . . . . . . . . . . . . . . . . . . . . . . . . 19
 13.3 Chemical Mowing............................... 19
 13.4 Cut Stump Application . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
 13.5 Habitat Management ............................ 20
14 14.0 ANNUAL WEEDS RATE SECTION  . . . . . . . . . . . . . . . . . . .20
 14.1 Annual Weeds—Tank Mixtures with 2,4-D,
  Dicamba, or Tordon 22K.......................... 21
 14.2  Annual Weeds—Handheld Sprayers  ................ 21
 14.3 Annual Weeds—Tank Mixtures for Fallow
  and Reduced Tillage Systems...................... 21
15 15.0 PERENNIAL WEEDS RATE SECTION  ................ 21
16 16.0 WOODY BRUSH, TREES AND VINES RATE SECTION  .... 22
17 17.0 LIMIT OF WARRANTY AND LIABILITY ............... 23
1.0 INGREDIENTS
ACTIVE INGREDIENT:
*Glyphosate, N-(phosphonomethyl)glycine,
in the form of its potassium salt ..................................................... 48.8%
OTHER INGREDIENTS: ..................................................................... 51.2%
  100.0%
* Contains 660 grams of the active ingredient glyphosate, in the form of its
potassium salt, per liter or 5.5 pounds per U.S. gallon, which is equivalent
to 540 grams of the acid, glyphosate, per liter or 4.5 pounds per U.S. gallon
(39.8% by weight).
For a list of patents, if any, covering this product or its use, please go to
www.monsantotechnology.com.
2.0 IMPORTANT PHONE NUMBERS
1. FOR PRODUCT INFORMATION OR ASSISTANCE USING THIS PRODUCT,
CALL TOLL-FREE, 1-866-99BAYER (1-866-992-2937)
2. IN CASE OF AN EMERGENCY INVOLVING THIS HERBICIDE PRODUCT,
OR FOR MEDICAL ASSISTANCE, CALL COLLECT, DAY OR NIGHT, 1-800-334-7577
3.0 PRECAUTIONARY STATEMENTS
3.1 Hazards to Humans and Domestic Animals
Keep out of reach of children
CAUTION
Causes moderate eye irritation
Harmful if inhaled
Avoid contact with eyes, skin, or clothing
Avoid breathing vapor or spray mist
FIRST AID
IF IN EYES •  Hold eye open and rinse slowly and gently with water for 15 to
20 minutes.
• Remove contact lenses if present after the first 5 minutes
then continue rinsing eye.
• Call a poison control center or doctor for treatment advice.
IF ON
SKIN OR
CLOTHING
• Take off contaminated clothing.
•  Rinse skin immediately with plenty of water for 15 to
20 minutes.
• Call a poison control center or doctor for treatment advice.
IF
INHALED
• Move person to fresh air.
•  If person is not breathing, call 911 or an ambulance, then give
artificial respiration, preferably mouth-to-mouth, if possible.
• Call a poison control center or doctor for treatment advice.
•  Have the product container or labeling with you when calling a poison
control center or doctor, or going for treatment.
• You can also call 1-800-334-7577, collect, day or night, for emergency
medical treatment information.
•  This product is identified as Roundup WeatherMAX Herbicide , EPA
Registration No. 524-537.
DOMESTIC ANIMALS: This product is considered to be relatively nontoxic
to dogs and other domestic animals; however, ingestion of this product
or large amounts of freshly sprayed vegetation could result in temporary
gastrointestinal irritation (vomiting, diarrhea, colic, etc.). If such symptoms
are observed, provide the animal with plenty of fluids to prevent dehydration.
Call a veterinarian if symptoms persist for more than 24 hours.
Personal Protective Equipment (PPE)
Some of the materials that are chemical-resistant to this product are listed below.
Mixers, Loaders, Other Handlers and Applicators, when handling
this concentrated product or its application solutions of 30 percent
concentration or greater, must wear: long-sleeved shirt and long pants,
socks and shoes, and chemical-resistant gloves made of any waterproof
material, such as polyethylene or polyvinyl chloride.
Applicators, when handling only spray solutions where concentration is
30 percent of this product or less, must wear: long-sleeved shirt and long
pants, socks and shoes.
Follow manufacturer’s instructions for cleaning/maintaining PPE (Personal
Protective Equipment). If there are no instructions for washables, use
detergent and hot water. Keep and wash PPE separately from other laundry.
When handlers use closed systems, enclosed cabs, or aircraft in a manner
that meets the requirements listed in the Worker Protection Standard (WPS)
for agricultural pesticides [40 CFR 170.240 (d) (4-6)], the handler PPE
requirements may be reduced or modified as specified in the WPS.
IMPORTANT : When reduced PPE is worn because a closed system is being
used, handlers must be provided all PPE specified above for “applicators
and other handlers” and have such PPE immediately available for use in an
emergency, such as a spill or equipment breakdown.
User Safety Recommendations
Users should:
•  Wash hands before eating, drinking, chewing gum, using tobacco, or
using the toilet
•  Remove clothing immediately if pesticide gets inside. Then wash
thoroughly and put on clean clothing
3.2 Environmental Hazards
Do not apply directly to water, to areas where surface water is present or to
intertidal areas below the mean high-water mark. Do not contaminate water
when cleaning equipment or disposing of equipment wash waters and rinsate.
3.3 Physical or Chemical Hazards
Spray solutions of this product may be mixed, stored and applied using
stainless steel, fiberglass, plastic or plastic-lined steel containers.
DO NOT MIX, STORE OR APPLY THIS PRODUCT OR SPRAY SOLUTIONS OF THIS
PRODUCT IN GALVANIZED STEEL OR UNLINED STEEL (EXCEPT STAINLESS
STEEL) CONTAINERS OR SPRAY TANKS. This product or spray solutions of
this product react with such containers and tanks to produce hydrogen gas,
which can form a highly combustible gas mixture. This gas mixture could flash
or explode if ignited by open flame, spark, welder’s torch, lighted cigarette or
other ignition source and cause serious personal injury.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in any manner inconsistent
with its labeling. This product may only be used in accordance with the
Directions for Use on this label or on separately published supplemental
labeling. Supplemental labeling for this product can be obtained from your
Authorized Bayer CropScience LP Representative.
Do not apply this product in a way that will contact workers or other persons,
either directly or through drift. Only protected handlers may be in the area
during application. For any requirements specific to your State or Tribe,
consult the agency responsible for pesticide regulation.
1

Agricultural Use Requirements
Use this product only in accordance with its labeling and with the Worker
Protection Standard, 40 CFR Part 170. This Standard contains requirements
for the protection of agricultural workers on farms, forests, nurseries,
and greenhouses, and handlers of agricultural pesticides. It contains
requirements for training, decontamination, notification, and emergency
assistance. It also contains specific instructions and exceptions pertaining
to the statements on this label about personal protective equipment (PPE)
and restricted-entry interval. The requirements in this box only apply to uses
of this product that are covered by the Worker Protection Standard.
Do not enter or allow worker entry into treated areas during the
restricted-entry interval (REI) of 4 hours.
PPE required for early entry to treated areas that is permitted under the Worker
Protection Standard and that involves contact with anything that has been
treated, such as plants, soil, or water, is: coveralls, shoes plus socks, and
chemical-resistant gloves made of any waterproof material.
Non-Agricultural Use Requirements
The requirements in this box apply to uses of this product that are NOT
within the scope of the Worker Protection Standard for agricultural pesticides
(40 CFR Part 170). The WPS applies when this product is used to produce
agricultural plants on farms, forests, nurseries or greenhouses.
Keep people and pets off treated areas until spray solution has dried.
4.0 STORAGE AND DISPOSAL
Proper pesticide storage and disposal are essential to protect against
exposure to people and the environment due to leaks and spills, excess
product or waste, and vandalism. Do not allow this product to contaminate
water, foodstuffs, feed or seed by storage or disposal.
PESTICIDE STORAGE: Store pesticides away from food, pet food, feed, seed,
fertilizers, and veterinary supplies. Keep container closed to prevent spills
and contamination. See individual container label for additional storage
conditions, if any.
PESTICIDE DISPOSAL: To avoid wastes, use all material in the container,
including rinsate, by application according to label directions. If wastes
cannot be avoided, offer remaining product to a waste disposal facility
or pesticide disposal program. Such programs are often run by state or
local governments or by industry. All disposal must be in accordance with
applicable federal, state and local regulations and procedures.
CONTAINER HANDLING AND DISPOSAL:  Nonrefillable container. Do not
reuse this container to hold materials other than pesticides or dilute
pesticides (rinsate). After emptying and cleaning, it may be allowable
to temporarily hold rinsate or other pesticide-related materials in this
container. Contact your state regulatory agency to determine allowable
practices in your state.
Triple rinse or pressure rinse (or equivalent) this container promptly after
emptying.
Triple rinse as follows: Empty the remaining contents into application
equipment or mix-tank and continue to drain for 10 seconds after the flow
begins to drip. Fill the container 1/4 full with water and recap. Shake for
10 seconds. Pour rinsate into application equipment or mix-tank, or store
rinsate for later use or disposal.  Continue to drain for 10 seconds after the
flow begins to drip. Repeat this procedure two more times.
Pressure rinse as follows: Empty the remaining contents into application
equipment or mix-tank and continue to drain for 10 seconds after the flow
begins to drip. Place container so that it can drain directly into application
equipment or mix-tank while rinsing, or collect rinsate for later use or
disposal. Insert pressure rinsing nozzle into the side of the container
and rinse at about 40 PSI for at least 30 seconds. Continue to drain for
10 seconds after the flow begins to drip.
Once properly rinsed, some plastic pesticide containers can be taken to a
container collection site or picked up for recycling.
To find the nearest collection site, contact your chemical dealer or Bayer
CropScience LP at 1-866-99BAYER (1-866-992-2937).
If recycling is not available, dispose of in accordance with federal, state
and local regulations and procedures, which may include puncturing the
properly rinsed container and disposing in a sanitary landfill.
5.0 PRODUCT INFORMATION
Product Description: This product is a postemergence, systemic herbicide
with no soil residual activity. It is generally non-selective and gives
broad-spectrum control of many annual and perennial weeds, woody
brush, trees and vines. It is formulated as a water-soluble liquid containing
surfactant and may be applied using standard and specialized pesticide
application equipment after dilution and thorough mixing with water or other
carrier according to label directions.
Do not add surfactants, additives containing surfactants, buffering agents
or pH adjusting agents to the spray solution when Roundup WeatherMAX
Herbicide is the only pesticide being applied unless otherwise directed. See
the “MIXING” section of this label for instructions regarding other additives.
Mechanism of Action: The active ingredient in this product inhibits an
enzyme found only in plants and microorganisms that is essential to the
formation of specific amino acids.
No Soil Activity:  This product binds tightly to soil particles and does not
provide residual weed control. Weeds must be emerged at the time of
application to be controlled by foliar application of this product. Weed seeds
in the soil will not be affected by this product and will continue to germinate.
Unattached plant rhizomes and rootstocks beneath the soil surface will also
not be affected by this product.
Biological Degradation: Degradation of this product is primarily a biological
process carried out by soil microbes.
Stage of Weeds: Annual weeds are easiest to control when they are small.
Enhanced control of most perennial weeds is obtained when this product is
applied at late growth stages approaching maturity. Refer to the “ANNUAL
WEEDS RATE SECTION,” “PERENNIAL WEEDS RATE SECTION” and “WOODY
BRUSH, TREES AND VINES RATE SECTION” for more information on the control
of specific weeds.
Cultural Considerations:  Reduced weed control could result when this
product is applied to annual or perennial weeds that have been mowed,
grazed or cut, and have not been allowed to re-grow prior to application.
Always use a higher product application rate within the given range when
weed growth is heavy or dense, or when weeds are growing in an undisturbed
(non-cultivated) area. Reduced weed control could also result when this
product is applied to weeds that show signs of disease or insect damage, are
covered with dust, or are surviving under poor growing conditions.
Spray Coverage: For enhanced results, spray coverage must be uniform and
complete. Do not spray foliage to the point of runoff.
Rainfastness: Rainfall within 4 hours of application could wash this
product off of the foliage and a second application might then be needed
for acceptable weed control. Refer to specific use sections of this label
for additional information on the minimum intervals required before
re-application of this product.
Time to Symptoms: This product moves through the plant from the point of
foliage contact to and into the root system. Visible effects are a gradual wilting
and yellowing of the plant that advances to complete browning of aboveground
growth and deterioration of underground plant parts. Effects are visible on
most annual weeds within 2 to 4 days, but on most perennial weeds, effects
might not be visible for 7 or more days after application. Extremely cool or
cloudy weather following application could slow activity of this product and
delay development of visual symptoms.
Maximum Application Rates: The maximum application or use rates stated
throughout this label are given in units of volume (fluid ounces or quarts)
of this product per acre. However, the maximum allowable application rates
apply to this product combined with the use of any and all other herbicides
containing the active ingredient glyphosate, whether applied separately or in
a tank mixture, on a basis of total pounds of glyphosate (acid equivalents) per
acre. If more than one glyphosate-containing product is applied to the same
site within the same year, you must ensure that the total use of glyphosate
(pounds acid equivalents) does not exceed the maximum allowed. See the
“INGREDIENTS” section of this label for necessary product information.
Unless otherwise specified on this label, the combined total application of this
product on a site must not exceed 5.3 quarts (6 pounds of glyphosate acid)
per acre per year. For applications on non-crop sites, or on tree, vine or shrub
crop production sites, the combined total application of this product must not
exceed 7 quarts (8 pounds of glyphosate acid) per acre per year.
NOTE: Use of this product in any manner not consistent with this label
could result in injury to persons, animals or crops, or have other unintended
consequences.
6.0 WEED RESISTANCE MANAGEMENT
Glyphosate, the active ingredient in this product, is a Group 9 herbicide
based on the mechanism of action classification system of the Weed Science
Society of America. Any weed population can contain plants that are naturally
resistant to Group 9 herbicides. Weeds resistant to Group 9 herbicides can
be effectively managed by using another herbicide from a different Group
(either alone or in a mixture according to label directions), by using other
cultural or mechanical methods of weed control, or a combination of the two.
Consult your local company representative, state cooperative extension agent,
professional consultant or other qualified authority to determine appropriate
actions for controlling specific resistant weeds.
6.1 Weed Management Practices
Resistant populations arise when rare individual plants are uncontrolled by
a normal dose of a given herbicide under normal environmental conditions.
In the absence of other control measures these individuals survive, produce
seed, and eventually become the dominant biotype in the field through
continuous selection. The best means of reducing this selection is to use
diverse weed control practices such as multiple herbicides with different
mechanisms of action, and often in combination with various mechanical
and cultural practices.
To minimize the occurrence of herbicide-resistant biotypes, including those
resistant to glyphosate, implement the following weed management practice
options that are practical to your situation. These management practices are
applicable to reduce the spread of confirmed resistant biotypes (managing
existing resistant biotypes) and to reduce the potential for selecting for
resistance in new species (proactive resistance management).
•  Use a diversified approach toward weed management focused on
preventing weed seed production and reducing the number of weed seeds
in the soil.
•  Plant crops into fields that are as weed-free as possible and then keep them
as weed-free as possible.
• Plant crop seed that is as weed-free as possible.
• Scout fields routinely, before and after herbicide application.
•  Use multiple herbicide mechanisms of action that are effective against
the most troublesome weeds in your field and against those with known
resistance.
•  Apply herbicides at application rates listed on the label when weeds are
within the size range indicated on the label.
•  Emphasize cultural practices that suppress weeds by using crop
competitiveness.
•  Use mechanical and biological weed management practices where
appropriate.
• Prevent field-to-field and within-field movement of weed seed or vegetative
propagules.
• Manage weed seed at harvest and after harvest to prevent a buildup of the
weed seedbank.
6.2 Management of Glyphosate-Resistant Biotypes
Appropriate testing is needed to determine if a weed is resistant to
glyphosate. Call 1-866-99BAYER (1-866-992-2937) or contact your Bayer
CropScience LP representative to determine if resistance in any particular
weed biotype has been confirmed in your area, or visit on the Internet at
www.weedresistancemanagement.com or www.weedscience.org.
Glyphosate-resistant weeds can be controlled or managed by applying this
product in combination with residual preemergence herbicides and/or other
postemergence herbicides labeled for control of the targeted weed in the crop
being grown. For more information, see the “ANNUAL WEEDS RATE SECTION”
and “PERENNIAL WEEDS RATE SECTION” of this label.
Since the occurrence of resistant weeds is difficult to detect prior to use, Bayer
CropScience LP accepts no liability for any losses that result from the failure
of this product to control resistant weeds.
2

7.0 MIXING
Spray solutions of this product may be mixed, stored and applied using clean
stainless steel, fiberglass, plastic or plastic-lined steel containers.
DO NOT MIX, STORE OR APPLY THIS PRODUCT OR SPRAY SOLUTIONS OF THIS
PRODUCT IN GALVANIZED STEEL OR UNLINED STEEL (EXCEPT STAINLESS
STEEL) CONTAINERS OR SPRAY TANKS.
Eliminate any risk of siphoning the contents of the tank back into the carrier
source while mixing. Use approved anti-back-siphoning devices where
required by State or local regulations.
A 50-mesh nozzle screen or line strainer on the spray equipment is adequate.
Clean sprayer parts promptly after using this product by thoroughly flushing
with water.
7.1 Mixing with Water
PERFORMANCE OF THIS PRODUCT CAN BE SIGNIFICANTLY REDUCED IF WATER
CONTAINING SOIL SEDIMENT IS USED AS CARRIER.  DO NOT MIX THIS PRODUCT
WITH WATER FROM PONDS OR DITCHES THAT IS VISIBLY MUDDY OR MURKY .
This product mixes readily with water. Mix spray solutions of this product as
follows. Begin filling the mixing tank or spray tank with clean water. Add the
required amount of this product near the end of the filling process and mix
gently. Foaming of the spray solution can occur during mixing. To prevent or
minimize foaming, mix gently, terminate bypass and return lines at the bottom
of the tank, and, if necessary, add an appropriate anti-foam or defoaming agent
to the spray solution.
7.2 Tank Mixtures
This product does not provide residual weed control. This product may be
tank-mixed with other herbicides to provide residual weed control in the soil, a
broader weed control spectrum, or an alternate mechanism of action.
Some tank-mix products have the potential to cause crop injury under certain
conditions, at certain growth stages and/or under other circumstances.
Read the label of all products to be used in the tank mixture prior to use to
determine the potential for crop injury.
Tank mixtures with other herbicides, insecticides, fungicides, micronutrients
or foliar fertilizers could result in reduced weed control or crop injury.
Bayer CropScience LP has not tested all tank-mix product formulations for
compatibility, antagonism or reduction in product performance. To the extent
consistent with applicable law, buyer and all users are responsible for any
and all loss or damage in connection with the use or handling of mixtures of
this product with herbicides or other materials that are not expressly specified
on this label, or on separate supplemental labeling or Fact Sheets published
for this product.
When a tank-mix with a generic active ingredient, such as 2,4-D, atrazine,
dicamba, diuron, pendimethalin, or any other product or material, is listed
on this label, the user is responsible for ensuring that the specific application
being made is included on the label of the product used in the mix.
Refer to all individual product labels, supplemental labeling and Fact
Sheets for all products in the tank mixture, and observe all precautions and
limitations on the label, including any application timing restrictions, soil
restrictions, minimum re-cropping intervals and/or crop rotation restrictions.
Use according to the most restrictive precautionary statements for each
product in the tank mixture.
For enhanced results, apply tank mixtures with this product at a minimum
spray volume rate of 10 gallons per acre.
7.3 Tank-Mixing Procedure
Always predetermine the compatibility of all tank-mix products together in the
carrier by mixing small proportional quantities in advance.
Mix only the quantity of spray solution that will be applied that day.
Application of tank-mix solutions that are allowed to stand overnight could
result in reduced weed control.
Prepare tank mixtures of this product as follows:
1. Place a 20- to 35-mesh screen or wetting basket over the filling port of the tank.
2. Through the screen, fill the tank one-half full with water and start gentle
agitation.
3. If ammonium sulfate is to be used, add it slowly through the screen into
the tank and continue adding water into the tank through the screen. If dry
ammonium sulfate is being used, ensure that it is completely dissolved in
the tank before adding other products.
4. If a wettable powder is used, prepare a slurry of it with water and add it
SLOWLY through the screen into the tank while continuing gentle agitation.
5. If a flowable formulation is used, premix one part flowable with one part
water and add the diluted mixture SLOWLY through the screen into the tank
while continuing gentle agitation.
6. If an emulsifiable concentrate formulation is used, premix one part
emulsifiable concentrate with two parts water and add the diluted mixture
SLOWLY through the screen into the tank while continuing gentle agitation.
7. Continue filling the tank with water through the screen and add the
required amount of this product near the end of the filling process.
8. Add individual tank-mix components to the tank as follows: wettable
powders, flowables, emulsifiable concentrates, drift reduction additives,
water soluble liquids (this product).
Maintain gentle agitation at all times until the contents of the tank are sprayed
out. If the spray mixture is allowed to settle, agitate thoroughly to resuspend
the mixture before resuming application.
Keep by-pass and return lines on or near the bottom of the tank to minimize
foaming.
A 50-mesh nozzle screen or line strainer on the spray equipment is adequate.
7.4 Mixing Spray Solution Concentrations
All reference throughout this label to concentration of this product in a spray
solution is on a percentage-of-volume basis.
Prepare the desired volume of spray solution at a given concentration by
mixing the amount of this product indicated in the following table with water.
Desired
Volume
of Spray
Solution
Amount of ROUNDUP WEATHERMAX HERBICIDE
to Achieve Indicated Concentration in Spray Solution
(percent by volume)
0.4% 0.7% 1% 1.5% 4% 7%
1 gallon 0.5 fl oz 1 fl oz 1.3 fl oz 2 fl oz 5 fl oz 9 fl oz
25 gallons 13 fl oz 22 fl oz 1 qt 1.5 qts 4 qts 7 qts
100 gallons 1.6 qts 2.8 qts 1 gal 1.5 gals 4 gals 7 gals
2 tablespoons = 1 fluid ounce (fl oz)
For filling backpack and pump-up sprayers, consider mixing the appropriate
amount of this product with water in a larger container and then filling the
sprayer from the larger container.
7.5       Ammonium Sulfate
Unless otherwise directed, the addition of 1 to 2 percent dry ammonium
sulfate by weight (8.5 to 17 pounds per 100 gallons of water), could increase
the performance of this product on annual and perennial weeds, particularly
under hard water conditions, drought conditions or when tank-mixed with
certain residual herbicides. An equivalent amount of a liquid formulation of
ammonium sulfate may also be used. Ensure that dry ammonium sulfate is
completely dissolved in the spray tank before adding herbicides. Thoroughly
rinse the spray system with clean water promptly after use to reduce
corrosion.
When using ammonium sulfate, apply this product at rates directed on this
label; lower application rates will result in reduced performance.
7.6 Colorants and Dyes
Colorants and marking dyes may be added to spray solutions of this product;
however, they can reduce the performance of this product. Use colorants and
dyes according to the manufacturer’s directions.
7.7 Drift Reduction Additives
Drift reduction additives may be used with all equipment types, except wiper
applicators, sponge bars and controlled droplet applicators (CDA). When a drift
reduction additive is used, read and follow all precautions, limitations and all
other information on the product label. Use of drift reduction additives can affect
spray coverage, which could reduce the performance of this product.
8.0 APPLICATION EQUIPMENT AND TECHNIQUES
This product may be applied with the following application equipment:
Aerial Application Equipment—fixed-wing and helicopter
Ground Application Equipment —boom or boomless systems, pull-type
sprayers, floaters, pick-up sprayers, spray coupes and other ground broadcast
application equipment
Handheld Sprayers —backpack sprayers, pump-up pressure sprayers,
handguns, handwands, mistblowers*, lances and other handheld and
motorized spray equipment used to direct the spray onto weed foliage
*This product is not registered in California or Arizona for use in mistblowers.
Selective Application Equipment —shielded and hooded sprayers, wiper
applicator, sponge bar
Injection Systems—aerial or ground injection sprayers
Controlled Droplet Applicator (CDA) —handheld or boom-mounted
applicators that produce a spray consisting of a narrow range of droplet sizes
APPLY THIS PRODUCT USING PROPERLY MAINTAINED AND CALIBRATED
EQUIPMENT CAPABLE OF ACCURATELY DELIVERING DESIRED VOLUMES.
Do not apply this product through any type of irrigation system.
8.1 Spray Drift Management
AVOID CONTACT OF THIS HERBICIDE WITH FOLIAGE, GREEN STEMS, EXPOSED
NON-WOODY ROOTS OR FRUIT OF CROPS, DESIRABLE PLANTS AND TREES,
EXCEPT AS DIRECTED FOR USE ON ROUNDUP READY ® CROPS, AS SEVERE
PLANT INJURY OR DESTRUCTION COULD RESULT.
Do not allow the herbicide solution to mist, drip, drift, or splash onto desirable
vegetation, as small quantities of this product can cause severe damage or
destruction to the crop, plants or other vegetation on which application was
not intended.
AVOID DRIFT. USE EXTREME CARE TO PREVENT INJURY TO DESIRABLE PLANTS
AND CROPS WHEN APPLYING THIS PRODUCT.
Avoiding spray drift at the application site is the responsibility of the
applicator. The interaction of many equipment- and weather-related factors
determines the potential for spray drift. The applicator and grower are
responsible for considering all these factors when making decisions regarding
the application of this product.
The likelihood of injury occurring as the result of spray drift while applying this
product increases when winds are gusty, as wind velocity increases, when
wind direction is constantly changing or when there are other meteorological
conditions that favor spray drift. When spraying, avoid combinations of
pressure and nozzle type that will result in splatter or generation of fine
particles (mist) that are likely to drift.
TO PREVENT INJURY TO ADJACENT DESIRABLE VEGETATION, APPROPRIATE
BUFFERS MUST BE MAINTAINED.
AVOID APPLYING THIS PRODUCT AT EXCESSIVE SPEED OR SPRAYER
PRESSURE.
8.2 Aerial Application Equipment
Unless otherwise prohibited, all applications of this product described on this
label may be made using aerial application equipment where appropriate,
provided that the applicator complies with the precautions and restrictions
specified on this label or on separate supplemental labeling published for
this product.
DO NOT APPLY THIS PRODUCT USING AERIAL APPLICATION EQUIPMENT
EXCEPT UNDER CONDITIONS SPECIFIED ON THIS LABEL OR ON SEPARATELY
PUBLISHED SUPPLEMENTAL LABELING FOR THIS PRODUCT.
FOR SPECIFIC USE INSTRUCTIONS, RESTRICTIONS AND REQUIREMENTS
RELATED TO THE AERIAL APPLICATION OF THIS PRODUCT IN ARKANSAS AND
3

CALIFORNIA, OR SPECIFIC COUNTIES THEREIN, REFER TO THE LIMITATIONS ON
AERIAL APPLICATION IN THAT STATE OR COUNTY PRESENTED IN THIS SECTION.
Unless otherwise directed, the maximum single application rate of this
product is 44 fluid ounces per acre when using aerial application equipment.
Apply this product at the appropriate rate in 3 to 15 gallons of water per
acre unless otherwise directed on this label or on separate supplemental
labeling for this product. Refer to the individual use sections of this label for
application rates, spray volumes and additional directions for use.
Drift control reduction additives may be used.
Ensure uniform application. To avoid streaked, uneven or overlapped
application, use appropriate marking devices.
Aircraft Maintenance
Thoroughly wash aircraft, especially landing gear, after each day of spraying
to remove residues of this product accumulated during spraying or from
spills. PROLONGED EXPOSURE OF THIS PRODUCT TO UNCOATED STEEL
SURFACES COULD RESULT IN CORROSION AND POSSIBLE FAILURE OF THE
PART. LANDING GEAR IS MOST SUSCEPTIBLE. The maintenance of an organic
coating (paint) that meets aerospace specification MIL-C-38413 can help
prevent corrosion.
AERIAL SPRAY DRIFT MANAGEMENT
The following drift management requirements must be followed to minimize
off-target drift movement during aerial application.
1. The distance of the outermost nozzles on the boom must not exceed 3/4
the length of the wingspan or rotor.
2. Nozzles must always point backward, parallel with the air stream and
never be pointed downwards more than 45 degrees. Where states have
more stringent regulations, they must be followed.
Importance of Droplet Size
The most effective way to reduce drift potential is to apply large droplets.
The best drift management strategy is to apply the largest droplets that
provide sufficient coverage and control. Applying larger droplets reduces
drift potential, but will not prevent drift if the application is made improperly
or under unfavorable environmental conditions, such as in windy, high
temperature with low humidity, and/or inversion conditions as described
below.
Controlling Droplet Size
• Volume: Use high flow rate nozzles to apply the highest practical spray
volume. Nozzles with the higher rated flows produce larger droplets.
• Pressure: Operate at a sprayer pressure towards the lower end of the
range listed for the nozzle. Higher pressure reduces droplet size and does
not improve canopy penetration. When higher flow rates are needed, use
higher flow rate nozzles instead of increasing the pressure.
•  Number of nozzles: Use the minimum number of nozzles that provide
uniform coverage.
•  Nozzle orientation:  Orienting nozzles so that the spray is released
backwards, parallel to the air stream, will produce larger droplets than
other orientations. Significant deflection from the horizontal will reduce
droplet size and increase drift potential.
•  Nozzle type:  Use a nozzle type that is designed for the intended
application. With most nozzle types, narrower spray angles produce larger
droplets. Consider using low-drift nozzles. Solid stream nozzles oriented
straight back produce larger droplets than other nozzle types.
• Boom length: For some use patterns, reducing the effective boom length
to less than ¾ of the wingspan or rotor length could further reduce drift
without reducing swath width.
• Application height: Application must be made at a height of 10 feet or
less above the top of the largest plants, unless a greater height is required
for aircraft safety. Making the application at the lowest height that is safe
reduces the exposure of the droplets to evaporation and wind.
Swath Adjustment
When an application is made with a crosswind present, the swath will be
displaced downwind. Therefore, on the upwind and downwind edges of the
field, the applicator must compensate for this displacement by adjusting the
path of the aircraft upwind. Increase the swath adjustment distance with
increasing drift potential (higher wind, smaller droplets, etc.).
Wind
Drift potential is lowest at wind speeds of between 2 and 10 miles per hour.
However, many factors, including droplet size and equipment type, determine
drift potential at any given wind speed. Avoid application when wind speeds
are below 2 miles per hour due to variable wind direction and high inversion
potential. NOTE: Local terrain can influence wind patterns. Every applicator
must be familiar with local wind patterns and how they affect drift.
Temperature and Humidity
When making an application in low relative humidity, set application
equipment to produce larger droplets to compensate for evaporation. Droplet
evaporation is most severe when conditions are both hot and dry.
Temperature Inversion
Do not apply this product during a temperature inversion as drift potential
is high under these conditions. Temperature inversions restrict vertical air
mixing, which causes small droplets to remain suspended in a concentrated
cloud. This cloud can move in unpredictable directions due to the light variable
winds common during inversions. Temperature inversions are characterized
by increasing temperatures with altitude and are common on nights with
limited cloud cover and light to no wind. They begin to form as the sun sets
and often continue into the morning. Their presence can be indicated by
ground fog; however, if fog is not present, inversions can also be identified by
the movement of smoke from a ground source or an aircraft smoke generator.
Smoke that layers and moves laterally in a concentrated cloud (under low
wind conditions) indicates an inversion, while smoke that moves upward and
rapidly dissipates indicates good vertical air mixing.
Sensitive Areas
Apply this product only when the potential for drift to adjacent sensitive areas
(e.g., residential areas, bodies of water, known habitat for threatened or
endangered species, non-target crops) is minimal (e.g., when wind is blowing
away from a sensitive area).
Avoid direct application to any body of water.
State Specific Limitations on Aerial Application
LIMITATIONS ON AERIAL APPLICATION IN CALIFORNIA ONLY
DO NOT apply this product using aerial application equipment in residential areas.
AVOID DRIFT – DO NOT APPLY WHEN WINDS ARE GUSTY OR UNDER ANY
OTHER CONDITION THAT FAVORS DRIFT. DRIFT OF THIS PRODUCT ONTO
ANY VEGETATION TO WHICH APPLICATION WAS NOT INTENDED CAN CAUSE
DAMAGE. TO PREVENT INJURY TO ADJACENT DESIRABLE VEGETATION, USE
PROPER AERIAL APPLICATION EQUIPMENT FITTED WITH APPROPRIATE
NOZZLES AND MAINTAIN ADEQUATE BUFFERS.
Follow the directions below when making an aerial application near non-target
crops, desirable annual vegetation, or desirable perennial vegetation after bud
break and before total leaf drop.
1. Do not apply this product within 100 feet of all desirable vegetation or
non-target crops.
2.  If winds are blowing up to 5 miles per hour TOWARD desirable vegetation or
non-target crops, do not apply this product within 500 feet of the desirable
vegetation or crops.
3. If winds are blowing between 5 and 10 miles per hour TOWARD desirable
vegetation or non-target crops, a buffer zone greater than 500 feet might
be needed to protect the desirable vegetation or crops.
4.  Do not apply this product using aerial application equipment when winds
are blowing in excess of 10 miles per hour.
5.  Do not apply this product using aerial application equipment when
inversion conditions exist.
When tank-mixing this product with 2,4-D, only 2,4-D amine formulations may
be applied in California using aerial application equipment. Tank mixtures of
this product with 2,4-D amine formulations may be applied by air in California
on fallow fields and in reduced tillage systems, and for alfalfa and pasture
renovation applications only.
This product, when tank-mixed with dicamba, may not be applied by air in
California.
ADDITIONAL LIMITATIONS ON AERIAL APPLICATION
IN FRESNO COUNTY , CALIFORNIA ONLY
Always read and follow the label directions and precautionary statements for
all products used in the aerial application.
The following information applies only from February 15 through
March 31 within the following boundaries of Fresno County, California:
North: Fresno County line
South: Fresno County line
East: State Highway 99
West: Fresno County line
Observe the following directions to minimize off-site movement during
aerial application of this product. Minimization of off-site movement is the
responsibility of the grower, Pest Control Advisor and aerial applicator.
Written Directions
Written directions MUST be submitted by or on behalf of the applicator to the
Fresno County Agricultural Commissioner 24 hours prior to the application.
These written directions MUST state the proximity of surrounding crops and
that conditions of each manufacturer’s product label and this label have been
satisfied.
Aerial Applicator Training and Equipment
Aerial application of this product is limited to pilots who have successfully
completed a Fresno County Agricultural Commissioner and California
Department of Pesticide Regulation approved training program for aerial
application of herbicides. All aircraft must be inspected, critiqued in flight
and certified at a Fresno County Agricultural Commissioner approved fly-in.
Test and calibrate spray equipment at intervals sufficient to insure that proper
rates of herbicides and adjuvants are being applied during commercial use.
Applicator must document such calibrations and testing. Demonstration of
performance at Fresno County Agricultural Commissioner approved fly-ins
constitutes such documentation, or other written records showing calculations
and measurements of flight and spray parameters acceptable to the Fresno
County Agricultural Commissioner.
Application at Night – Do not apply this product by air earlier than
30 minutes prior to sunrise and/or later than 30 minutes after sunset without
prior permission from the Fresno County Agricultural Commissioner.
For additional information on the proper aerial application of this product in
Fresno County, call 1-866-99BAYER (1-866-992-2937).
LIMITATIONS ON AERIAL APPLICATION IN ARKANSAS ONLY
AVOID DRIFT. DO NOT APPLY INTO STILL AIR WHERE THERE IS A
TEMPERATURE INVERSION LAYER LOW ENOUGH FOR FINE SPRAY PARTICLES
TO BECOME SUSPENDED AND MOVE OUTSIDE THE TARGET AREA WHEN
THE INVERSION LAYER MOVES. DO NOT APPLY WHEN WINDS ARE GUSTY
OR UNDER ANY OTHER CONDITION THAT FAVORS DRIFT. DRIFT IS LIKELY TO
CAUSE DAMAGE TO ANY VEGETATION CONTACTED. TO PREVENT INJURY TO
ADJACENT DESIRABLE VEGETATION, APPROPRIATE BUFFER ZONES MUST BE
MAINTAINED.
Apply this product at the appropriate rate in 3 to 15 gallons of water per acre.
Use sufficient carrier volume and appropriate equipment set-up to form
droplets large enough to avoid drift potential. Coarse droplets in the 300 to
500 (VMD) micron range have a lower drift potential.
Applications are typically to be made with the nozzle release point at 8 to
15 feet above the top of the target plants unless a greater height is required
for aircraft safety.
The distance of the outermost nozzles on the boom must not exceed
75 percent of the length of the wingspan or rotor. In many cases, reducing this
distance to 65 percent of the length of the wingspan or rotor will improve drift
control without affecting the swath width.
Nozzles must always discharge backward parallel with the air stream and
never discharge downwards more than 45 degrees on fixed wing aircraft or
forward of the prevailing airflow on rotary winged aircraft. Avoid the use of
nozzles with wide-angle discharge.
Do not apply this product when winds are in excess of 10 miles per hour.
Do not apply when there is a low-level inversion where fine spray particles
could be suspended in still air and move outside the target area when the
4

inversion layer moves. These conditions can occur when wind speeds are
less than 2 miles per hour.
Follow the directions below when an aerial application is made near
non-target crops or other desirable vegetation:
1.  Do not apply this product within 100 feet of non-target crops or any
desirable vegetation.
2.  If winds are blowing up to 5 miles per hour TOWARD non-target crops or
desirable vegetation, do not apply this product within 500 feet upwind of
the crop or desirable vegetation.
3.  If winds are blowing between 5 and 10 miles per hour TOWARD non-target
crops or desirable vegetation, a buffer zone greater than 500 feet might be
needed to protect the crop or desirable vegetation.
8.3 Ground Application Equipment
Apply this product at the appropriate rate as specified on this label in 3 to
40 gallons of water per acre when making a broadcast application using
ground application equipment, unless otherwise directed on this label or on
separate supplemental labeling or Fact Sheets published for this product.
As the weed density increases, increase the spray volume towards the
upper end of this range to ensure complete coverage. Use nozzles that will
avoid generating a fine mist.  For enhanced results with ground application
equipment, use flat-fan nozzles. Check spray pattern for uniform distribution
of spray droplets.
8.4 Handheld Sprayers
When using a handheld sprayer, apply spray solutions of this product uniformly
and completely to the foliage of target weeds using a coarse droplet spectrum and
a spray-to-wet technique; do not spray to the point of runoff. For the appropriate
concentration of this product in the spray solution and timing of application to
control specific weeds, woody brush, trees and vines, refer to the “ANNUAL
WEEDS RATE SECTION,” “PERENNIAL WEEDS RATE SECTION” and “WOODY
BRUSH, TREES AND VINES RATE SECTION” of this label.
Spot treatment application of this product for weed control in a cropping system
using a handheld sprayer may be made only when specifically directed on this
label or on separate supplemental labeling for this product. The crop sprayed with
this product will be killed along with the weeds. Take care not to spray or allow
spray to drift outside the target area in order to avoid unwanted crop destruction.
8.5 Selective Application Equipment
Selective application equipment allows this product to be applied to weeds
growing near the crop or other desirable vegetation without killing the
desirable vegetation. Selective application equipment must be capable of
preventing all contact of the herbicide solution with the crop or other desirable
vegetation and operated without spray mist escape, leakage, or dripping of
the herbicide solution.
AVOID CONTACT OF THIS HERBICIDE WITH DESIRABLE VEGETATION. Contact
of this product with desirable vegetation could result in unwanted plant
damage or destruction. To the extent consistent with applicable law, such
damage shall be the sole responsibility of the applicator.
Shielded and Hooded Sprayers
A shielded sprayer directs the herbicide solution to the target weeds while
protecting the crop or other desirable vegetation from being contacted by
the herbicide spray with an impervious material or shield. Use nozzles that
provide uniform coverage within the application area. Keep shields properly
adjusted to protect desirable vegetation.
A hooded sprayer is a type of shielded sprayer where the spray pattern is fully
enclosed, including the top, sides, front and back, thereby shielding the crop
or other desirable vegetation from the spray solution.
This product may be diluted in water and applied using a shielded or hooded
sprayer to weeds listed on this label growing on any non-crop site described
on this label and in between rows of plants (row middles) in any cropping
system listed on this label.
Properly adjust the hood to protect desirable vegetation. Ensure that the
hood is capable of completely enclosing the spray pattern. If necessary when
applying around crops grown on raised beds, extend the front and rear flaps of
the hooded sprayer downward to reach the ground in deep furrows.
A hooded sprayer must be configured and operated in a manner that
minimizes bouncing and avoids raising the hood up off the ground surface
at any time. If the hood is raised, spray particles can escape and come into
contact with the crop, causing damage to or destruction of the crop or other
desirable vegetation. Avoid operating this equipment on rough or sloping
terrain where the spray hood is likely to rise up off the ground surface.
Use hoods designed to minimize excessive dripping or runoff down the inside
of the hood, such as a single, low pressure, low-drift, flat-fan nozzle with an
80- to 95-degree spray angle positioned at the top center of the hood, with a
spray volume of 20 to 30 gallons per acre.
The following procedures will help reduce the potential for crop injury when
using a hooded sprayer:
• Operate the sprayer with the hood on the ground or skimming across the
ground surface.
•  Leave at least an 8-inch untreated strip over the drill row. (For example,
if the crop row width is 38 inches, make the maximum width of the spray
hood 30 inches.)
• Operate at a ground speed of no greater than 5 miles per hour to minimize
bouncing of the hooded sprayer.
• Apply when wind speed is 10 miles per hour or less.
• Use low-drift nozzles that provide uniform coverage within the application
area.
Injury to a crop or other desirable vegetation can occur when application
is made to foliage of weeds that come into direct contact with the crop or
desirable vegetation.  Do not apply this product when leaves of desirable
vegetation are growing in direct contact with weeds. Droplets, mist, foam or
splatter of the herbicide solution settling onto desirable vegetation can result
in discoloration, stunting or destruction.
Wiper Applicator
A wiper applicator is a device that physically wipes this product or solutions
of this product directly onto the target weed or cut stump. Any handheld
device that is capable of physically wiping this product or solutions of this
product directly onto the target weed or cut stump, such as a paint brush,
may be used.
A mechanical wiper applicator, such as a rope wick or sponge bar that can be
driven through a field over the top of a crop or other desirable vegetation to
control weeds that are taller than the desirable vegetation, must be designed,
maintained and operated to prevent the herbicide solution from contacting
desirable vegetation.
Wiper applicators may be used over the top of food or feed crops ONLY if
specifically permitted for use over that crop by this label or by separately
published supplemental labeling for this product.
When using a mechanical wiper applicator, adjust the height of the applicator
to ensure adequate contact with weeds and so that the wiper contact point
is a minimum of 2 inches above the desirable vegetation. Enhanced results
can be obtained when more of the weed is exposed to the herbicide solution
and weeds are a minimum of 6 inches above the desirable vegetation. Weeds
that do not come into contact with the herbicide solution will not be affected.
Poor contact can occur when weeds are growing in dense clumps, when
operating in an area of severe weed infestation, or when weed height varies
dramatically. In these situations, more than one application of this product
might be necessary.
Operate wiper applicators at a ground speed of no greater than 5 miles per
hour.  Performance in areas of heavy weed infestation can be improved by
reducing speed, which will provide more time for re-saturation of the wiper
with the herbicide solution and more contact time of the wiper with the
weed. Enhanced results with a wiper applicator can be obtained when two
applications are made traveling in opposite directions in the field.
Keep wiper surfaces clean.
Droplets, mist, foam or splatter of the herbicide solution settling onto
desirable vegetation can result in discoloration, stunting or destruction. Avoid
leakage or dripping onto desirable vegetation. Be aware that on sloping ground
the herbicide solution can migrate to one side, causing dripping on the lower
end and drying of the wiper on the upper end of the applicator.
Do not apply this product using a wiper applicator when weeds are wet.
Do not add surfactant to the herbicide solution when using a wiper applicator.
For Rope and Sponge Wick Applicators—use solutions ranging from 33 to
75 percent of this product in water.
For Panel Applicators —use solutions ranging from 33 to 100 percent
(undiluted) of this product in water.
Mix only the amount of this product that will be used during a 1-day period,
as reduced product performance can result from the use of solutions held
in storage.
Clean wiper parts promptly after using this product by thoroughly flushing
with water.
8.6 Injection Systems
This product may be used in aerial and ground injection spray systems as a
liquid concentrate or diluted prior to injecting into the spray stream. Do not mix
this concentrated product with the undiluted concentrate of other products for
use in injection systems, unless otherwise directed.
8.7 Controlled Droplet Applicator (CDA)
The amount of this product applied per acre using a controlled droplet
applicator (CDA) must be no less than the rate specified on this label for
application using conventional broadcast application equipment.
A controlled droplet applicator produces a spray pattern that is not easily
visible. Use extreme care to avoid spray or drift from contacting the foliage or
any other green tissue of desirable vegetation, as plant damage or destruction
could result.
9.0 ANNUAL AND PERENNIAL CROPS
THIS SECTION PROVIDES DIRECTIONS FOR USE OF THIS PRODUCT THAT APPLY
TO ALL CROPS LISTED IN THE FOLLOWING SECTIONS. SEE THE INDIVIDUAL
CROP SECTIONS FOR SPECIFIC USE INSTRUCTIONS, PREHARVEST INTERVALS,
AND ADDITIONAL PRECAUTIONS AND RESTRICTIONS.
See the “ROUNDUP READY CROPS” section of this label or separately published
supplemental labeling for this product for directions for use in Roundup Ready
crops.
TYPES OF APPLICATION: Chemical Fallow; Preplant Fallow Beds; Preplant;
At-Planting; Preemergence; Hooded Sprayer in Row Middles; Shielded Sprayer in
Row Middles; Wiper Applicator in Row Middles; Post-Harvest
USE INSTRUCTIONS: This product may be applied during fallow intervals
preceding planting, prior to planting or transplanting, at-planting, or
preemergence to annual and perennial crops listed on this label, except where
specifically limited. For any crop not listed on this label, application must be
made a minimum of 30 days prior to planting. Unless otherwise directed,
apply this product according to the rates listed in the “ANNUAL WEEDS RATE
SECTION,” “PERENNIAL WEEDS RATE SECTION” and “WOODY BRUSH, TREES
AND VINES RATE SECTION” of this label. Application rates specified on this label
for hard-to-control weeds, or those specified on separate supplemental labeling
for this product, supersede the rates in the “ANNUAL WEEDS RATE SECTION,”
“PERENNIAL WEEDS RATE SECTION” and “WOODY BRUSH, TREES AND VINES
RATE SECTION” of this label.  Additional information on hard-to-control weeds
can be found on Fact Sheets published for this product.
Application of this product may be repeated as needed up to a maximum of
5.3 quarts per acre per year. Refer to specific use sections of this label for
additional information on minimum intervals required before re-application of
this product.
Hooded sprayers and wiper applicators capable of preventing all contact of the
herbicide solution with the crop may be used in mulched or unmulched row
middles after crop establishment. Wiper applicators may be used over the top of
crops to control tall weeds only when specifically directed in the individual crop
sections that follow. Crop injury is possible with these methods of application.
Refer to the “APPLICATION EQUIPMENT AND TECHNIQUES” section of this label
for information regarding the potential for crop injury using selective application
equipment.
Spot treatment application of this product for weed control in a cropping system
may be made only when specifically directed in the individual crop sections
that follow.
Unless otherwise prohibited, all applications of this product described in the
sections that follow may be made using aerial application equipment where
5

appropriate, provided that the applicator complies with the precautions and
restrictions specified on this label and on all supplemental labeling published for
this product. Refer to the “APPLICATION EQUIPMENT AND TECHNIQUES” section
of this label for information on aerial application and procedures for avoiding
spray drift that could cause injury to any vegetation not intended for application.
Use of appropriate buffers will help prevent injury to adjacent vegetation.
TANK MIXTURES: This product may be tank-mixed with other herbicides to
provide residual weed control, a broader weed control spectrum or an alternate
mechanism of action. Always read and follow label directions for all products in
the tank mixture. Use all products according to rates and timing specified on the
label. Some tank-mix products have the potential to cause crop injury.  Read the
label of all products in the tank mixture prior to use to determine the potential
for crop injury. Always predetermine the compatibility of tank-mix products
together in the carrier by mixing small proportional quantities in advance. Mixing
other products with this herbicide in the spray tank can cause incompatibility,
antagonism, or a reduction in the efficacy of this product. Bayer CropScience
LP has not tested all product formulations for compatibility or performance in a
tank-mix with this product. To the extent consistent with applicable law, buyer
and all users are responsible for any and all loss or damage in connection with
the use or handling of mixtures of this product with herbicides or other materials
that are not specifically identified on this label or on separate supplemental
labeling or Fact Sheets for this product. See the “MIXING” section of this label
for more information on tank mixtures.
PRECAUTIONS: Avoid contact of this herbicide with foliage, green shoots or
stems, bark, exposed roots (including those emerging from plastic mulch),
or fruit of crops, as severe crop injury or destruction could result. Transplant
seedlings coming into contact with weeds that are still wet with a spray
solution of this product could result in significant crop injury.  When making
preemergence applications, application must be made before crop emergence to
avoid severe crop injury. Broadcast application of this product at emergence will
result in injury or death of emerged seedlings. Apply before seed germination in
coarse sandy soils to further minimize the risk of crop injury.  In crops where spot
treatment is allowed, the crop sprayed with this product will be killed along with
the weeds. Take care not to spray or allow spray to drift outside the target area
in order to avoid unwanted crop destruction. See the “APPLICATION EQUIPMENT
AND TECHNIQUES” section of this label for additional information.
Preharvest application on crops grown for seed could result in a reduction in
germination or vigor. To the extent consistent with applicable law, buyer and
all users are responsible for any and all loss or damage in connection with the
preharvest use of this product on any crop grown for seed.
RESTRICTIONS: Observe the maximum application rates stated throughout this
label. Maximum application rates apply to the use of this product combined
with the use of any and all other herbicides containing glyphosate as the active
ingredient, whether applied separately or as mixtures. Calculate the application
rates (glyphosate acid equivalents) and ensure that the total use of this and
other glyphosate-containing products does not exceed the stated maximum rate.
See the “PRODUCT INFORMATION” section of this label for more information on
Maximum Application Rates.
Unless otherwise directed on this label, application using selective equipment,
including wiper applicators and hooded sprayers, must be made a minimum
of 14 days prior to harvest. In crops where spot treatment is allowed, do not
apply this product to more than 10 percent of the total field to be harvested,
unless otherwise directed.  Post-harvest and fallow applications must be made
a minimum of 30 days prior to the planting of any crop not listed on this label.
Do not harvest or feed vegetation from an area for 8 weeks following broadcast
postemergence application, unless otherwise directed.
When applying this product as a tank mixture with one or more products, refer
to each individual tank-mix product label for restrictions and apply the mixture
in accordance with the most restrictive statements for each product in the tank.
9.1 Cereal and Grain Crops
LABELED CROPS: Barley; Buckwheat; Millet (pearl, proso); Oats; Rice; Rye;
Quinoa; Teff; Teosinte; Triticale; Wheat (all types); Wild Rice
TYPES OF APPLICATION: Those listed in Section 9.0, plus Red Rice Control
Prior to Planting Rice; Spot Treatment (except rice); Control of Barnyardgrass
in Rice Using Renovation Treatment (California only); Wiper Applicator (feed
barley and wheat only); Preharvest (feed barley and wheat only)
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after the
planting of cereal crops, but prior to crop emergence.
Red Rice Control Prior to Planting Rice
USE INSTRUCTIONS: Flush fields prior to application to obtain uniform
germination and stand of red rice and then apply 32 fluid ounces of this
product in 5 to 10 gallons of water per acre when the majority of the red rice
plants are at the 2-leaf stage and no more than 4 inches tall. Red rice plants
with less than 2 true leaves might only be partially controlled. Avoid spraying
during conditions of low humidity, as reduced control of red rice could result.
RESTRICTIONS: Do not apply this product to rice fields or levees when fields
contain floodwater. Do not flood fields for a minimum of 8 days following
application.
Spot Treatment (Except Rice)
USE INSTRUCTIONS: This product may be applied as a spot treatment in
cereal crops, except rice. Apply before heading in small grains.
RESTRICTIONS: Do not apply this product to more than 10 percent of the total
field area to be harvested.
Control of Barnyardgrass in Rice Using Renovation Treatment (California Only)
THIS APPLICATION FOR USE IN CALIFORNIA ONLY
USE INSTRUCTIONS: This product may be applied as a renovation treatment
in rice crops to control barnyardgrass ( Echinochola crus-galli ) infestations
using ground broadcast application equipment or a handheld sprayer.
Renovation is defined as an herbicide application that will result in crop and
weed destruction in an entire field or contiguous area within a field.
RESTRICTIONS: Rice straw and stubble from the application area, including
a 25-foot buffer zone on all sides, may not be used for animal bedding,
grazing, or any other feed purpose. DO NOT make this application using aerial
application equipment.
Wiper Applicator (Feed Barley and Wheat Only)
USE INSTRUCTIONS: This product may be applied over the top of feed barley
and wheat using a wiper applicator to control tall weeds. To control common
rye or cereal rye, apply after weeds have headed and achieved maximum
growth. See additional instructions on the use of wiper applicators in the
“APPLICATION EQUIPMENT AND TECHNIQUES” section of this label.
RESTRICTIONS: Allow a minimum of 35 days between application and
harvest. Do not use roller applicator.
Preharvest (Feed Barley and Wheat Only)
USE INSTRUCTIONS: This product provides weed control when applied prior
to harvest of feed barley or wheat. For feed barley, apply after the hard-dough
stage when grain moisture is 20 percent or less. For wheat, apply after the
hard-dough stage when grain moisture is 30 percent or less. Stubble may be
grazed immediately after harvest.
Apply this product in 10 to 20 gallons of water per acre when using ground
application equipment and in 3 to 10 gallons of water per acre when using
aerial application equipment.
RESTRICTIONS: Do not apply more than 22 fluid ounces of this product
per acre for preharvest application. Allow a minimum of 7 days between
application and harvest or grazing.
Post-Harvest
USE INSTRUCTIONS: This product may be applied for weed control after
harvest of cereal crops. Higher rates might be needed to control large weeds
that were growing in the field at the time of harvest. Tank mixtures with 2,4-D
or dicamba may be used. Ensure that the product used is labeled for weed
control following harvest of cereal crops. Read and follow label directions for
all products in the tank mixture.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest
or feeding of vegetation within the application area. Application must be made
a minimum of 30 days prior to the planting of any crop not listed on this label.
9.2 Corn
TYPES OF CORN: Field corn; Popcorn; Seed corn; Silage corn; Sweet corn
TYPES OF APPLICATION: Those listed in Section 9.0, plus Spot Treatment;
Preharvest
For directions for use with field corn hybrids with Roundup Ready 2 Technology
(including Roundup Ready Corn 2 and field corn products displaying the Roundup
Ready 2 Technology logo), or with sweet corn hybrids with Roundup Ready 2
Technology (including Roundup Ready Sweet Corn and sweet corn products
displaying the Roundup Ready 2 Technology logo), see the “ROUNDUP READY
CROPS” section of this label.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied alone or in a tank-mix
before, during or after planting corn, but prior to crop emergence.
TANK MIXTURES: This product may be tank-mixed with the following products.
Ensure that the product used is labeled for application prior to the planting
or the emergence of the type of corn crop being grown. Read and follow label
directions for all products in the tank mixture. Apply these tank mixtures in
10 to 20 gallons of water or 10 to 60 gallons of nitrogen solution per acre.
2,4-D; acetochlor; atrazine; bicyclopyrone; carfentrazone-ethyl;
clopyralid; dicamba; diflufenzopyr; dimethenamid; dimethenamid-p;
flufenacet; flumetsulam; flumiclorac pentyl ester; isoxaflutole; linuron;
mesotrione; metolachlor; s-metolachlor; metribuzin; pendimethalin;
rimsulfuron; saflufenacil; simazine; thiencarbazone-methyl
AAtrex 4L; AAtrex Nine-O; Acuron; Acuron Flexi; Aim EC; Aim EW; Atrazine
4L; Atrazine 90 DF; Axiom DF; Balance Flexx; Banvel; Banvel 480; Bicep II
MAGNUM; Bicep II MAGNUM FC; Bicep Lite II MAGNUM; Callisto; Cinch;
Cinch ATZ; Cinch ATZ Lite; Clarity; Corvus; Degree Xtra; Distinct; Dual
MAGNUM; Dual II MAGNUM; FulTime; FulTime NXT ; Guardsman MAX;
Harness; Harness Xtra; Harness Xtra 5.6L; Hornet WDG Broadleaf Blend;
Keystone; Keystone LA; Keystone LA NXT ; Keystone NXT ; Leadoff; Linex
4L; Lorox DF; Marksman; Me-Too-Lachlor II; Outlook; Prowl 3.3 EC;
Prowl H2O; Python WDG; Resicore; Resolve DF; Resolve Q; Resolve SG;
Resource; Shark EW; Shark H2O; Sharpen Powered by Kixor; Simazine
4L Flowable; Simazine 90 DF; Simazine 90 WDG; Stalwart; Stalwart C;
Stalwart Xtra; Stinger; Surpass EC; Surpass NXT ; TopNotch; TripleFLEX II
For hard-to-control annual weeds, such as fall panicum, barnyardgrass,
crabgrass, shattercane and broadleaf signalgrass up to 2 inches tall, and
Pennsylvania smartweed up to 6 inches tall, apply 22 fluid ounces of this
product per acre in these tank mixtures. For other annual weeds listed on this
label, apply 16 to 22 fluid ounces of this product per acre when weeds are
less than 6 inches tall and 22 to 32 fluid ounces per acre when weeds are over
6 inches tall. When using a nitrogen solution as the carrier, higher application
rates might be needed for acceptable weed control.
RESTRICTIONS: Application of 2,4-D or dicamba must be made a minimum of
7 days prior to planting corn.
In Southern states, do not mix this product in nitrogen solutions for application
to hard-to-control grasses, such as barnyardgrass, fall panicum, broadleaf
signalgrass, annual ryegrass and any perennial weeds. This area includes
Illinois and Indiana south of Route 50, Alabama, Arkansas, Delaware, Florida,
Georgia, Kentucky, Louisiana, Maryland, Mississippi, New Jersey, North Carolina,
Oklahoma, South Carolina, Tennessee, Texas, Virginia and West Virginia.
Hooded Sprayer
USE INSTRUCTIONS: This product may be applied using a hooded sprayer for
weed control in between rows of corn. Only hooded sprayers that completely
enclose the spray pattern may be used. See additional instructions on the
use of hooded sprayers in the “APPLICATION EQUIPMENT AND TECHNIQUES”
section of this label.
RESTRICTIONS: Corn must be at least 12 inches tall, measured without
extending leaves. Do not apply more than 22 fluid ounces of this product per
acre for each hooded sprayer application and no more than 64 fluid ounces
per acre per year total.
Spot Treatment
USE INSTRUCTIONS: This product may be applied as a spot treatment prior
to silking of corn.
RESTRICTIONS: Do not apply this product to more than 10 percent of the total
field area to be harvested.
6

Preharvest
USE INSTRUCTIONS: Up to 64 fluid ounces of this product per acre may be
applied using ground application equipment, or up to 44 fluid ounces per
acre using aerial application equipment, when kernel-fill is complete and
the corn is physiologically mature (black layer formed) and grain moisture is
35 percent or less.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest.
Post-Harvest
USE INSTRUCTIONS: This product may be applied for weed control after
harvest of corn. Higher rates might be needed to control large weeds that
were growing in the field at the time of harvest. Tank mixtures with 2,4-D
or dicamba may be used. Ensure that the product used is labeled for
post-harvest application in corn. Read and follow label directions for all
products in the tank mixture.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest
or feeding of vegetation within the application area. Application of this product
must be made a minimum of 30 days prior to planting any crop not listed
on this label.
9.3 Cotton
TYPES OF APPLICATION: Those listed in Section 9.0, plus Selective Equipment;
Spot Treatment; Preharvest
For directions for use with Roundup Ready cotton and Roundup Ready Flex
cotton, see the “ROUNDUP READY CROPS” section of this label.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after
planting cotton, but prior to crop emergence.
TANK MIXTURES: This product may be tank-mixed with 2,4-D or Clarity and
applied prior to planting only. This product may also be tank-mixed with the
following products and applied prior to crop emergence. Ensure that the
product used is labeled for application prior to planting or the emergence
of cotton. Read and follow label directions for all products used in the tank
mixture. Apply these tank mixtures in 10 to 20 gallons of water per acre.
acetochlor; clomazone; diuron; flumioxazin; fluometuron; fomesafen;
metolachlor; s-metolachlor; norflurazon; pendimethalin; prometyrn;
pyrithiobac-sodium, saflufenacil
Caparol 4L; Command 3ME; Cotoran 4L; Cotton Pro; Dawn; Direx 4L;
Dual MAGNUM; Dual II MAGNUM; Karmex DF; Prowl 3.3 EC; Prowl H2O;
Reflex; Rowel; Sharpen Powered by Kixor; Stalwart; Staple LX; Valor SX;
Warrant; Warrant Ultra
Selective Equipment
USE INSTRUCTIONS: This product may be applied using a hooded or shielded
sprayer, or over the top of cotton using a wiper applicator to control tall weeds.
See additional instructions on the use of this selective equipment in the
“APPLICATION EQUIPMENT AND TECHNIQUES” section of this label.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest.
Spot Treatment
USE INSTRUCTIONS: This product may be applied in cotton as a spot
treatment prior to boll opening.
RESTRICTIONS: Do not apply this product to more than 10 percent of the total
field area to be harvested.
Preharvest
USE INSTRUCTIONS: This product provides weed control and cotton re-growth
inhibition when applied prior to harvest. For weed control, apply at rates
given in the “ANNUAL WEEDS RATE SECTION” and “PERENNIAL WEEDS
RATE SECTION” of this label. For cotton re-growth inhibition, apply 16 to
44 fluid ounces of this product per acre. Make preharvest application only
after sufficient bolls have developed to produce the desired yield. Application
made prior to this time could affect maximum yield potential.
TANK MIXTURES: This product may be tank-mixed with DEF 6, Dropp, Folex,
Ginstar, or Prep to enhance cotton leaf-drop. Read and follow label directions
for all products used in the tank mixture.
RESTRICTIONS: Allow a minimum of 7 days between application and
harvest. DO NOT ADD ADDITIONAL SURFACTANT OR ADDITIVES CONTAINING
SURFACTANT TO THIS PRODUCT FOR PREHARVEST APPLICATION TO COTTON.
9.4 Fallow Systems
This product may be applied during the fallow period prior to planting or
emergence of any crop listed on this label. Application must be made a
minimum of 30 days prior to the planting of any crop not listed on this label.
TYPES OF APPLICATION: Chemical Fallow; Preplant Fallow Beds; Aid-to-Tillage
Chemical Fallow
USE INSTRUCTIONS: This product may be used as a substitute for tillage to
control annual weeds in fallow fields. Broadcast or spot treatment application
will also control or suppress many perennial weeds in fallow fields. Tank-mix
this product with 2,4-D or dicamba for a broader weed control spectrum.
Aerial application of up to 44 fluid ounces of this product per acre may be
made onto fallow fields where there is sufficient buffer to prevent injury due
to drift onto adjacent crops.
PRECAUTIONS:  Some crop injury could occur if dicamba is applied within
45 days of planting.
Preplant Fallow Beds
USE INSTRUCTIONS: This product will control weeds listed in the “ANNUAL
WEEDS RATE SECTION,” “PERENNIAL WEEDS RATE SECTION” and “WOODY
BRUSH, TREES AND VINES RATE SECTION” of this label prior to planting.
TANK MIXTURES: Apply 8 fluid ounces of this product per acre in a
tank-mix with an appropriate rate of Goal 2XL to control the following weeds up
to the maximum height or length indicated: 3 inches—common cheeseweed,
chickweed, groundsel; 6 inches—London rocket, shepherd’s-purse.
Apply 11 fluid ounces of this product per acre in a tank-mix with an
appropriate rate of Goal 2XL to control the following weeds up to the maximum
height or length indicated: 6 inches—common cheeseweed, groundsel,
marestail (Conyza canadensis) ; 12 inches—chickweed, London rocket,
shepherd’s-purse.
Aid-to-Tillage
USE INSTRUCTIONS: This product may be used in conjunction with tillage
practices in fallow systems, or prior to the planting of crops listed on this label
(preplant), to control downy brome, cheat, volunteer wheat, tansy mustard
and foxtail. Apply 8 fluid ounces of this product in 3 to 10 gallons of water
per acre before weeds are 6 inches in height. Application must be followed
by conventional tillage no later than 15 days after application and before
re-growth occurs. Allow a minimum of 1 day after application before tillage.
PRECAUTIONS: Tank mixtures with residual herbicides could result in reduced
performance of this product.
9.5 Grain Sorghum (Milo)
TYPES OF APPLICATION: Those listed in Section 9.0, plus Spot Treatment;
Wiper Applicator; Preharvest
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied alone or in a tank mixture
before, during or after planting grain sorghum, but prior to crop emergence.
TANK MIXTURES: This product may be tank-mixed with the following products.
Ensure that the product used is labeled for application prior to planting or
emergence of grain sorghum. Read and follow label directions for all products
used in the tank mixture. Apply these tank mixtures in 10 to 20 gallons of
water or 10 to 60 gallons of nitrogen solution per acre.
acetochlor; atrazine; metolachlor; s-metolachlor; saflufenacil
Bicep II MAGNUM; Bicep II MAGNUM FC; Bicep Lite II MAGNUM; Degree
Xtra; Dual MAGNUM; Dual II MAGNUM; Sharpen Powered by Kixor;
Warrant
For hard-to-control annual weeds, such as fall panicum, barnyardgrass,
crabgrass, shattercane and broadleaf signalgrass up to 2 inches tall, and
Pennsylvania smartweed up to 6 inches tall, apply 22 fluid ounces of this
product per acre in a tank mixture with one or more of the products listed here.
For control of other annual weeds listed on this label, apply 16 to 22 fluid
ounces of this product per acre when weeds are less than 6 inches tall, and
22 to 32 fluid ounces per acre when weeds are over 6 inches tall. When
using a nitrogen solution as the carrier, the application rate might need to be
increased to achieve acceptable weed control.
Spot Treatment, Wiper Applicator
USE INSTRUCTIONS: This product may be applied as a spot treatment in grain
sorghum before heading. This product may also be applied over the top of
grain sorghum using a wiper applicator to control or suppress tall weeds. See
additional instructions on the use of wiper applicators in the “APPLICATION
EQUIPMENT AND TECHNIQUES” section of this label.
RESTRICTIONS: For spot treatment, do not apply this product to more than
10 percent of the total field area to be harvested. When applied using a wiper
applicator, allow a minimum of 40 days between application and harvest. Do
not use a roller applicator. Do not feed or graze grain sorghum fodder or ensile
vegetation within the application area.
Hooded Sprayer
USE INSTRUCTIONS: This product may be applied using a hooded sprayer
for weed control in between rows of grain sorghum. Make application before
grain sorghum sends tillers between the drill rows. If tillers are sprayed with
this herbicide, the main plant could be damaged or destroyed. Contact of this
product in any manner with any vegetation to which application is not intended
could cause damage. Only hooded sprayers that completely enclose the spray
pattern may be used. See additional instructions on the use of hooded sprayers
in the “APPLICATION EQUIPMENT AND TECHNIQUES” section of this label.
RESTRICTIONS: Grain sorghum must be at least 12 inches tall, measured
without extending leaves. Do not graze or feed grain sorghum forage or
fodder following application of this product using a hooded sprayer. Do not
apply more than 22 fluid ounces of this product per acre per hooded sprayer
application and no more than 64 fluid ounces per acre per year total.
Preharvest
USE INSTRUCTIONS: Up to 44 fluid ounces of this product per acre may be applied
after sorghum grain has reached 30 percent moisture or less. As with other
herbicides that cause sudden plant death, avoid preharvest application of this
product on grain sorghum (milo) infected with charcoal rot as lodging can occur.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest
of grain sorghum. Preharvest application of this product on grain sorghum
(milo) is not registered for use in California.
Post-Harvest
USE INSTRUCTIONS: This product may be applied for weed control after
harvest of grain sorghum. Higher application rates might be needed to control
large weeds that were growing in the field at the time of harvest. Tank mixtures
with 2,4-D or dicamba may be used. Ensure that the product used is labeled
for post-harvest application in grain sorghum (milo). Read and follow label
directions for all products in the tank mixture.
This product may be applied to grain sorghum stubble following harvest to
control or suppress re-growth. Apply 22 fluid ounces of this product per acre
for control or 16 fluid ounces per acre for suppression.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest
or feeding of vegetation within the application area.  Application must be made
a minimum of 30 days prior to the planting of any crop not listed on this label.
9.6 Herbs and Spices
LABELED CROPS: Allspice; Angelica; Star anise; Annatto (seed); Balm; Basil;
Borage; Burnet; Camomile; Caper buds; Caraway; Black caraway; Cardamom;
Cassia bark; Cassia buds; Catnip; Celery seed; Chervil (dried); Chive; Chinese
chive; Cinnamon; Clary; Clove buds; Coriander leaf (cilantro or Chinese
parsley); Coriander seed (cilantro); Costmary; Culantro (leaf); Culantro (seed);
Cumin; Curry (leaf); Dill (dillweed); Dill (seed); Epazote; Fennel seed (common
and Florence); Fenugreek; White ginger flower; Grains of paradise; Horehound;
Hyssop; Juniper berry; Lavender; Lemongrass; Lovage (leaf and seed); Mace;
Marigold; Marjoram (including oregano); Mexican oregano; Mioga flower;
Mustard (seed); Nasturtium; Nutmeg; Parsley (dried); Pennyroyal; Pepper
(black and white); Pepper leaves; Peppermint; Perilla; Poppy (seed); Rosemary;
Rue; Saffron; Sage; Savory (summer and winter); Spearmint; Stevia leaves;
Sweet bay; Tansy; Tarragon; Thyme; Vanilla; Wintergreen; Woodruff; Wormwood
TYPES OF APPLICATION: Those listed in Section 9.0, plus Spot Treatment
(peppermint and spearmint only); Wiper Applicator (peppermint and
spearmint only)
PRECAUTIONS: This product could cause crop injury when applied prior to
transplanting or direct-seeding crops into plastic mulch. Remove residual
product from the plastic prior to planting with a single 0.5-inch application of
7

water, either by natural rainfall or by irrigation. Ensure that the wash water
flushes off the plastic mulch and does not enter the transplant holes.  Application
made at crop emergence will result in injury or death of emerged seedlings.
Spot Treatment, Wiper Applicator (Peppermint and Spearmint Only)
USE INSTRUCTIONS: This product may be applied as a spot treatment in
peppermint and spearmint or over the top of peppermint and spearmint with
a wiper applicator to control tall weeds. Application may be repeated on the
same area at 30-day intervals. See additional instructions on the use of wiper
applicators in the “APPLICATION EQUIPMENT AND TECHNIQUES” section of
this label.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest.
For spot treatment application, do not apply this product to more than
10 percent of the total field area to be harvested.
9.7 Oilseed Crops
LABELED CROPS: Borage; Buffalo gourd; Calendula; Canola; Castor oil plant;
Chinese tallowtree; Crambe; Cuphea; Echium; Euphorbia; Evening primrose;
Flax; Gold of pleasure; Hare’s ear mustard; Jojoba; Lesquerella; Meadowfoam;
Milkweed; Mustard; Niger seed; Oil radish; Poppy; Rape; Rose hip; Safflower;
Sesame; Stokes aster; Sunflower; Sweet rocket; Tallowwood; Tea oil plant; Vernonia
For directions for use with Roundup Ready canola and TruFlex™ Roundup Ready®
canola, see the “ROUNDUP READY CROPS” section of this label.
TYPES OF APPLICATION: Those listed in Section 9.0, plus Preharvest (except
buffalo gourd)
USE INSTRUCTIONS: Refer to the following table for maximum application rates of
this product for use in safflower, sunflower and all other oilseed crops listed in this
section, if a preharvest application is to be made. If a preharvest application is NOT
to be made, the maximum application rate of this product for all preemergence,
selective equipment and post-harvest applications in any oilseed crop listed in
this section is limited only by the maximum of 5.3 quarts per acre per year. If a
preharvest application is intended to be made to any crop listed in this section,
except buffalo gourd, the maximum combined total of all preemergence and
selective equipment applications is limited as indicated in the following table.
See the “PRODUCT INFORMATION” section of this label for more information on
Maximum Application Rates.
Maximum Application Rates if a Preharvest Application is Made
Safflower
Combined total for all Preemergence and
Selective Equipment applications
64 fluid ounces per acre
Preharvest application 64 fluid ounces per acre
Sunflower
Combined total for all Preemergence and
Selective Equipment applications
22 fluid ounces per acre
Preharvest application 22 fluid ounces per acre
All Other Oilseed Crops Listed (Except Buffalo Gourd)
Combined total for all Preemergence and
Selective Equipment applications
44 fluid ounces per acre
Preharvest application 32 fluid ounces per acre
RESTRICTIONS: Do not exceed a total application rate of 5.3 quarts of this
product per acre per year. Preharvest application is not permitted on buffalo
gourd.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting
oilseed crops listed in this section, but must be applied prior to crop emergence.
Observe the maximum application rates listed at the beginning of this section.
TANK MIXTURES: For sunflower, a tank mixture with pendimethalin may be
applied before, during or after planting into conventionally tilled soil, a cover
crop, established sod or previous crop residue.
RESTRICTIONS: See the use instructions at the beginning of this section for
important information on maximum application rates for preemergence and
selective equipment applications of this product.
Selective Equipment
USE INSTRUCTIONS: This product may be applied using a wiper applicator
or shielded sprayer between crop rows once the crop is established. Observe
the maximum application rates listed at the beginning of this section. See
additional instructions on the use of wiper applicators and hooded sprayers in
the “APPLICATION EQUIPMENT AND TECHNIQUES” section of this label.
Preharvest (Except Buffalo Gourd)
USE INSTRUCTIONS: This product provides weed control and serves as a harvest
aid when applied to a physiologically mature oilseed crop listed in this section.
For safflower, up to 64 fluid ounces of this product may be applied per acre when
seed has lost its opaque character, approximately 20 to 30 days after the end
of flowering of the secondary branches. For sunflower, up to 22 fluid ounces of
this product per acre may be applied when the backsides of sunflower heads
are yellow and bracts are turning brown and seed moisture content is less than
35 percent.  For all other oilseed crops listed in this section (except buffalo
gourd), up to 32 fluid ounces of this product per acre may be applied prior
to harvest.
RESTRICTIONS: DO NOT MAKE A PREHARVEST APPLICATION if you have
exceeded the maximum application rates for the combined total of all
preemergence and selective equipment applications listed in the table at the
beginning of this section. Make only 1 preharvest application of this product
and allow a minimum of 7 days between application and harvest or feeding to
livestock. Application must be made a minimum of 30 days prior to the planting
of any crop not listed on this label. Preharvest application is not allowed on
buffalo gourd or on Roundup Ready
®
 or TruFlex™ Roundup Ready
®
 canola.
Post-Harvest
USE INSTRUCTIONS: This product may be applied for weed control after harvest
of oilseed crops. Higher application rates might be needed for control of large
weeds that were growing in the field at the time of harvest. Tank mixtures with
2,4-D or dicamba may be used. Ensure that the product used is labeled for
post-harvest application in the crop harvested.  Read and follow label directions
for all products in the tank mixture.
RESTRICTIONS: Do not exceed a total application rate of 5.3 quarts of this
product per acre per year. Allow a minimum of 7 days between application of
this product and harvest or feeding of vegetation within the application area.
Application must be made a minimum of 30 days prior to the planting of any
crop not listed on this label.
9.8 Soybean
TYPES OF APPLICATION: Those listed in Section 9.0, plus Spot Treatment;
Selective Equipment; Preharvest
For directions for use with Roundup Ready soybean and Roundup Ready
2 Yield soybean, see the “ROUNDUP READY CROPS” section of this label.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied alone or in a tank mixture
before, during or after planting soybean, but prior to crop emergence.
TANK MIXTURES: This product may be tank-mixed with 2,4-D, Banvel
or Clarity and applied prior to planting only. This product may also be
tank-mixed with the following products and applied prior to crop emergence.
Ensure that the product used is labeled for application prior to planting or the
emergence of soybean. Read and follow label directions for all products in the
tank mixture. Apply these tank mixtures in 10 to 20 gallons of water per acre.
acetochlor; carfentrazone-ethyl; chlorimuron ethyl; clethodim; clomazone;
cloransulam-methyl; dimethenamid; dimethenamid-p; fenoxaprop-p-ethyl;
fluazifop-p-butyl; flufenacet; flumetsulam; flumiclorac pentyl ester;
flumioxazin; fluthiacet-methyl; fomesafen; imazaquin; imazethapyr;
lactofen; linuron; metolachlor; s-metolachlor; metribuzin; pendimethalin;
pyroxasulfone; quizalofop-P-ethyl; saflufenacil; sulfentrazone; tribenuron
methyl; trifluralin
Aim EC; Aim EW; Assure II; Authority Assist; Authority Elite; Authority
First DF; Authority MAXX; Authority MTZ DF; Authority XL; Axiom DF;
Blanket 4F; Boundary 6.5 EC; Cadet, Canopy; Canopy Blend; Canopy EX;
Classic; Cobra; Command 3ME; Dawn; Dual MAGNUM; Dual II MAGNUM;
Fierce; Fierce XLT ; FirstRate; Flexstar; Fusion; Linex 4L; Lorox DF;
Me-Too-Lachlor; Optill Powered by Kixor; Outlook; Phoenix; Prowl 3.3 EC;
Prowl H2O; Pursuit; Python WDG; Reflex; Resource; Rhythm; Rowel; Rowel
FX; Select; Select 2 EC; Select Max Herbicide with Inside Technology;
Sharpen Powered by Kixor; Spartan 4F; Treflan 4L; Treflan 4 EC; TriCor 4F;
TriCor DF; Valor SX; Valor XLT ; Warrant; Warrant Ultra; Zidua
For hard-to-control annual weeds, such as fall panicum, barnyardgrass,
crabgrass, shattercane and broadleaf signalgrass up to 2 inches tall, and
Pennsylvania smartweed up to 6 inches tall, apply 22 fluid ounces of this
product per acre in a tank mixture with one of the products listed. For other
annual weeds listed on this label, apply 16 to 22 fluid ounces of this product
per acre when weeds are less than 6 inches tall and 22 to 32 fluid ounces
when weeds are over 6 inches tall.
Spot Treatment
USE INSTRUCTIONS: This product may be applied as a spot treatment prior
to initial pod set in soybean.
RESTRICTIONS: Do not apply this product to more than 10 percent of the total
field area to be harvested.
Selective Equipment
USE INSTRUCTIONS: This product may be applied in soybean using a
shielded sprayer, hooded sprayer, wiper applicator or sponge bar. See
additional instructions on the use of selective equipment in the “APPLICATION
EQUIPMENT AND TECHNIQUES” section of this label.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest.
Preharvest
USE INSTRUCTIONS: This product may be applied to soybean prior to harvest
after pods have set and lost all green color. Apply at rates given in the
“ANNUAL WEEDS RATE SECTION” and “PERENNIAL WEEDS RATE SECTION”
of this label.  Take care to avoid excessive seed shatter loss due to ground
application equipment.
RESTRICTIONS: Do not apply more than 3.3 quarts of this product per acre
for preharvest application using ground application equipment or more than
44 fluid ounces per acre using aerial application equipment. Allow a minimum
of 7 days between application and harvest of soybean. If the preharvest
application rate is greater than 22 fluid ounces per acre, do not graze or
harvest hay or fodder within the application area for livestock feed within
25 days of application. If the application rate is 22 fluid ounces per acre or
less, the grazing restriction is reduced to 14 days after application.
9.9 Sugarcane
TYPES OF APPLICATION: Those listed in Section 9.0, plus Spot Treatment
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied in or around sugarcane
fields, or in fields prior to the emergence of plant cane.
RESTRICTIONS: Do not apply to vegetation in or around ditches, canals or
ponds containing water to be used for irrigation.
Spot Treatment
USE INSTRUCTIONS: This product may be applied as a spot treatment
in sugarcane. For control of volunteer or diseased sugarcane, apply a
1-percent solution of this product in water using a handheld sprayer and a
spray-to-wet technique. Enhanced results can be obtained on volunteer or
diseased sugarcane when application is made when there are at least 7
new leaves. Avoid contact of this herbicide with healthy sugarcane plants as
severe damage or destruction could result.
RESTRICTIONS: Do not feed or graze sugarcane foliage within the application
area.
Hooded Sprayer
USE INSTRUCTIONS: This product may be applied using a hooded sprayer for
weed control in between rows of sugarcane. See additional instructions on the
use of hooded sprayers in the “APPLICATION EQUIPMENT AND TECHNIQUES”
section of this label.
PRECAUTIONS: Do not allow weeds within the application area to come into
contact with the crop.
Fallow Treatment
USE INSTRUCTIONS: This product may be used as a replacement for tillage in
fields that are lying fallow between sugarcane crops. This product may also be
used to remove the last stubble of ratoon cane by applying 2.5 to 3.3 quarts
of this product in 10 to 40 gallons of water per acre to new growth having at
least 7 new leaves. Allow a minimum of 7 days after application before tillage.
Aerial application of up to 64 fluid ounces per acre may be made onto fallow
8

sites where there is sufficient buffer to prevent drift onto adjacent crops. Tank
mixtures with 2,4-D or dicamba may be used. Ensure that the product used is
labeled for this application in sugarcane. Read and follow label directions for
all products in the tank mixture.
9.9.1 Sugarcane Ripening
USE INSTRUCTIONS: This product may be used as a foliar-applied plant
growth regulator to hasten ripening and extend the period of high sucrose
level in both low- and high-tonnage sugarcane. Most of the sucrose increase
is concentrated in the top nodes of the cane stalk. To maximize sugar
recovery where topping is practiced at harvest, top at the base of the fourth
leaf.  Consult your state sugarcane authority or local Bayer CropScience
LP representative regarding the degree of sucrose response that can be
anticipated prior to application of this product.
As a result of leaf desiccation, improved trash burn can be expected.
Apply this product at the following rates and timing according to the State
in which the sugarcane is grown. Use the higher application rate within the
given range when applying to sugarcane under adverse ripening conditions or
to less responsive varieties.
FLORIDA – Apply 5 to 12 fluid ounces of this product per acre 3 to 5 weeks
before harvest of LAST RATOON CANE ONLY .
HAWAII – Apply 9 to 21 fluid ounces of this product per acre 4 to 10 weeks
before harvest.
LOUISIANA – Apply 4 to 12 fluid ounces of this product per acre 3 to 7 weeks
before harvest of RATOON CANE ONLY .
PUERTO RICO – Apply 5 fluid ounces of this product per acre 3 to 5 weeks
before harvest of RATOON CANE ONLY .
TEXAS – Apply 5 to 12 fluid ounces of this product per acre 3 to 5 weeks
before harvest of RATOON CANE ONLY .
PRECAUTIONS: Application of this product could initiate development
of shooting eyes. This product might not increase the sucrose content
of sugarcane under conditions of good natural ripening. Within 2 to
3 weeks after application, this product could produce a slight yellowing to
a pronounced browning and drying of leaves, and a shortening of upper
internodes. Spindle death could occur.
Rainfall within 6 hours after application could reduce the effectiveness of
this product.
Application to sugarcane grown for seed could result in a reduction in
germination or vigor. To the extent consistent with applicable law, buyer and
all users are responsible for any and all loss or damage in connection with the
preharvest use of this product on sugarcane grown for seed.
RESTRICTIONS: Do not feed or graze sugarcane forage following application.
Do not plant subsequent crops within 30 days after application of this product
other than the following: alfalfa or other forage legumes, beans (all types),
corn (all types), cotton, melons (all types), pasture grasses, peanuts, potatoes
(Irish or sweet), sorghum (milo), soybean, squash (all types) or wheat.
Do not apply for enhanced ripening to any crops other than sugarcane. Use
of this product in any manner not consistent with this label could result in
injury to persons, animals or crops, or have other unintended consequences.
9.10 Vegetable Crops
THIS SECTION PROVIDES DIRECTIONS FOR USE THAT APPLY TO ALL
VEGETABLE CROPS LISTED IN THE FOLLOWING SECTIONS. SEE THE
INDIVIDUAL CROP SECTIONS FOR SPECIFIC DIRECTIONS FOR USE,
PREHARVEST INTERVALS, PRECAUTIONS AND RESTRICTIONS.
TYPES OF APPLICATION: Chemical Fallow; Preplant Fallow Beds; Preplant;
At-Planting; Preemergence; Prior to Transplanting Vegetables; Hooded Sprayer
in Row Middles; Shielded Sprayer in Row Middles; Wiper Applicator in Row
Middles; Directed Application (non-bearing ginseng only); Wiper Applicator
(carrot, rutabaga, sweet potato only); Post-Harvest
PRECAUTIONS: This product could cause crop injury when applied prior to
transplanting or direct-seeding crops into plastic mulch. Remove residual
product from the plastic with a single 0.5-inch application of water, either
by natural rainfall or irrigation, prior to planting. Ensure that the wash
water flushes off the plastic mulch and does not enter the transplant holes.
Application of this product at crop emergence will result in injury or death to
emerged seedlings.
Avoid contact of this herbicide with foliage, green shoots or stems, bark, exposed
roots (including those emerging from the plastic mulch), or fruit of crops, as
severe crop injury or destruction could result. Transplanted seedlings coming
into contact with freshly sprayed weeds could result in significant crop injury.
Preemergence application must be made before crop emerges from the soil
to avoid severe crop injury. Apply before seed germination in coarse sandy
soils to further minimize the risk of crop injury. In crops with vines, make
hooded sprayer, shielded sprayer and wiper applications in row middles prior
to vine development, otherwise severe crop injury or destruction could result.
RESTRICTIONS: Unless otherwise directed, application using selective
equipment, including wiper applicators and hooded sprayers, must be made
a minimum of 14 days prior to harvest. Post-harvest and fallow applications
must be made a minimum of 30 days prior to the planting of any crop not
listed on this label. See additional use instructions in the “APPLICATION
EQUIPMENT AND TECHNIQUES” section of this label.
9.10.1 Brassica Vegetables
LABELED CROPS: Broccoli; Chinese broccoli (gai lon); Broccoli raab (rapini);
Brussels sprouts; Cabbage; Chinese cabbage (bok choy); Chinese cabbage (napa);
Chinese mustard cabbage (gai choy); Cauliflower; Cavalo broccoli; Collards; Kale;
Kohlrabi; Mizuna; Mustard greens; Mustard spinach; Rape greens
9.10.2 Bulb Vegetables
LABELED CROPS: All cultivars, varieties and/or hybrids of Chive (including
Chinese); Daylily; Elegans hosta; Fritillaria; Garlic (including great-headed,
serpent); Kurrat; Leek (including lady’s, wild); Onion (including Beltsville
bunching, bulb, Chinese, fresh, green, macrostem, pearl, potato, tree, Welsh);
Shallot
9.10.3 Cucurbit Vegetables and Fruits
LABELED CROPS: Chayote (fruit); Chinese waxgourd (Chinese preserving
melon); Citron melon; Cucumber; Gherkin; Edible gourd (includes hyotan,
cucuzza, hechima, Chinese okra); Melons (all); Momordica spp. (includes
balsam apple, balsam pear, bittermelon, Chinese cucumber); Muskmelon
(includes cantaloupe, casaba, crenshaw melon, golden pershaw melon,
honeydew melon, honey ball melon, mango melon, Persian melon, pineapple
melon, Santa Claus melon, snake melon); Pumpkin; Summer squash
(includes crookneck squash, scallop squash, straightneck squash, vegetable
marrow, zucchini); Winter squash (includes butternut squash, calabaza,
hubbard squash, acorn squash, spaghetti squash); Watermelon
RESTRICTIONS: For cantaloupe, casaba melon, crenshaw melon, cucumber,
gherkin, gourds, honeydew melon, honey ball melon, mango melon, melons
(all), muskmelon, Persian melon, pumpkin, squash (summer, winter), and
watermelon, allow a minimum of 3 days between application and planting.
9.10.4 Leafy Vegetables
LABELED CROPS: Amaranth (Chinese spinach); Arugula (roquette);
Beet greens; Cardoon; Celery; Chinese celery; Celtuce; Chaya; Chervil;
Edible-leaved chrysanthemum; Garland chrysanthemum; Corn salad; Cress
(garden, upland); Dandelion; Dock (sorrel); Dokudami; Endive (escarole);
Florence fennel; Gow kee; Lettuce (head, leaf); Orach, Parsley; Purslane
(garden, winter); Radicchio (red chicory); Rhubarb; Spinach; New Zealand
spinach; Vine spinach; Swiss chard; Watercress (upland); Water spinach
RESTRICTIONS: For watercress, allow a minimum of 3 days between
application and seeding. Do not apply this product during the period between
seeding and emergence.
9.10.5 Fruiting Vegetables
LABELED CROPS: All cultivars, varieties and/or hybrids of Eggplant (including
African, pea, scarlet); Cocona; Garden huckleberry; Goji berry; Groundcherry
(Physalis spp.); Martinynia; Naranjilla; Okra; Pepino; Pepper (includes
bell pepper, chili pepper, cooking pepper, pimento, sweet pepper); Roselle;
Sunberry; Tomatillo; Tomato
RESTRICTIONS: Allow a minimum of 3 days between application and planting.
For tomato and tomatillo, do not apply this product using a hooded or shielded
sprayer in row middles because of the potential for crop injury.
9.10.6 Legume Vegetables (Succulent or Dried)
LABELED CROPS: Bean ( Lupinus: includes grain lupin, sweet lupin, white
lupin, white sweet lupin); Bean (Phaseolus: includes field bean, kidney bean,
lima bean, navy bean, pinto bean, runner bean, snap bean, tepary bean, wax
bean); Bean ( Vigna: includes adzuki bean, asparagus bean, blackeyed pea,
catjang, Chinese longbean, cowpea, crowder pea, moth bean, mung bean, rice
bean, southern pea, urd bean, yardlong bean); Broad bean (fava); Chickpea
(garbanzo); Guar; Jackbean; Lablab bean; Lentil; Pea (Pisum: includes dwarf
pea, edible-podded pea, English pea, field pea, garden pea, green pea,
snowpea, sugar snap pea); Pigeon pea; Soybean (immature seed); Sword bean
TYPES OF APPLICATION: Those listed in Section 9.0, plus Spot Treatment
(dry varieties only); Preharvest (dry varieties only)
Spot Treatment (Dry Varieties Only)
USE INSTRUCTIONS: This product may be applied as a spot treatment to
control troublesome weeds such as Canada thistle, quackgrass, mayweed
(dog fennel) and milkweed in any dry legume variety listed in this section,
except cowpeas and field (feed) peas. Apply up to 22 fluid ounces of this
product per acre in dry beans, or up to 64 fluid ounces per acre in dry peas,
lentils and chickpeas, in 10 to 20 gallons of water using ground application
equipment, or apply a 2-percent solution in a handheld sprayer. For enhanced
results, apply at or beyond the bud stage of growth.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest.
Only one spot treatment application may be made per year. Do not combine
spot treatment with a preharvest broadcast application on the same crop area.
Allow a minimum of 30 days between application and the planting of any crop
not listed on this label. Do not feed vines and hay from the application area
to livestock. Do not apply this product as a spot treatment in cowpeas or field
(feed) peas, since these are considered to be grown only as livestock feed.
Preharvest (Dry Varieties Only)
USE INSTRUCTIONS: This product may be applied over the top of any dry
legume variety listed in this section prior to harvest, except cowpeas or field
(feed) peas. Apply up to 22 fluid ounces of this product per acre in dry beans,
or up to 64 fluid ounces per acre in dry peas, lentils and chickpeas, in 3 to
20 gallons of water per acre at the hard dough stage of the legume seed
(30 percent grain moisture or less).
RESTRICTIONS: Allow a minimum of 7 days between application and harvest.
Only one preharvest application may be made per year. Do not combine a
preharvest application with a spot treatment application on the same crop
area. Allow a minimum of 30 days between application and the planting of any
crop not listed on this label. Do not feed vines and hay from the application
area to livestock. Do not make a preharvest application of this product in
cowpeas or field (feed) peas, since these are considered to be grown only
as livestock feed.
9.10.7 Root and Tuber Vegetables
LABELED CROPS: Arracacha; Arrowroot; Chinese artichoke; Jerusalem
artichoke; Beet (garden); Burdock; Canna; Carrot; Cassava (bitter and sweet);
Celeriac; Chayote (root); Chervil (turnip-rooted); Chicory; Chufa; Dasheen
(taro); Galangal; Ginger; Ginseng; Horseradish; Leren; Kava (turnip-rooted);
Parsley (turnip-rooted); Parsnip; Potato; Radish; Oriental radish; Rutabaga;
Salsify; Black salsify; Spanish salsify; Skirret; Sweet potato; Tanier; Turmeric;
Turnip; Wasabi; Yacon; Yam bean; True yam
TYPES OF APPLICATION: Those listed in Section 9.0, plus Directed Application
(non-bearing ginseng only); Wiper applicator (carrot, rutabaga, sweet potato only)
Directed Application in Ginseng (Non-Bearing Only)
USE INSTRUCTIONS: This product may be applied for weed control in
established non-bearing ginseng using a boom sprayer, CDA, shielded
sprayer, wiper applicator, handheld or backpack wand, lance, or orchard
gun.  See additional use instructions in the “APPLICATION EQUIPMENT AND
TECHNIQUES” section of this label.
9

PRECAUTIONS: Control the application so as to not allow any contact
of this product with the ginseng plant. Droplets, mist, foam or splatter of
the herbicide solution settling onto desirable vegetation could result in
discoloration, stunting or destruction.
RESTRICTIONS: Application must be made a minimum of one year prior to
ginseng harvest.
Wiper Applicator (Carrot, Rutabaga and Sweet Potato Only)
USE INSTRUCTIONS: A 33-percent solution of this product by volume in water
may be applied using a wiper applicator over the top of carrot, rutabaga and
sweet potato for the control of tall weeds. See additional use instructions
for wiper applicators in the “APPLICATION EQUIPMENT AND TECHNIQUES”
section of this label.
RESTRICTIONS: For carrot, a maximum of two wiper or sponge bar
applications may be made a minimum of 60 days prior to harvest following the
first application and 7 days prior to harvest following the second application
or if only one wiper application is made over the top of the carrot crop. For
rutabaga, allow a minimum of 14 days between application and harvest. For
sweet potato, a maximum of five wiper or sponge bar applications may be
made with a minimum of 14 days between applications and a minimum of
7 days prior to harvest.
9.11 Miscellaneous Crops
LABELED CROPS: Aloe vera; Asparagus; Bamboo shoots; Globe artichoke;
Okra; Peanut; Pineapple; Sugarbeet
TYPES OF APPLICATION: Those listed in Section 9.0, plus Spot Treatment
(asparagus)
For directions for use with Roundup Ready sugarbeet, see the “ROUNDUP
READY CROPS” section of this label.
PRECAUTIONS: Preemergence application must be made before the
crop emerges from the soil to avoid severe crop injury. Apply before seed
germination in coarse sandy soils to further minimize the risk of crop injury.
In crops with vines, apply this product in row middles using a hooded sprayer,
shielded sprayer or wiper applicator prior to vine development, otherwise
severe crop injury or destruction could result.
Spot Weed Control, Site Preparation
USE INSTRUCTIONS: This product may be applied for spot weed control and
site preparation prior to planting or transplanting crops listed in this section.
PRECAUTIONS: This product could cause crop injury when applied prior to
transplanting or direct-seeding crops into plastic mulch. Remove residues of
this product from the plastic with a single 0.5-inch application of water, either
by natural rainfall or irrigation, prior to planting. Ensure that the wash water
flushes off the plastic mulch and does not enter transplant holes.
RESTRICTIONS: Allow a minimum of 21 days between residue removal and
transplanting. Do not apply this product within 7 days prior to the emergence
of the first asparagus spears. Do not feed or graze pineapple forage from
within the application area.
Spot Treatment (Asparagus)
USE INSTRUCTIONS: This product may be applied immediately after cutting
asparagus, but prior to the emergence of new spears.
RESTRICTIONS: Do not apply this product to more than 10 percent of the total
field area to be harvested. Do not harvest asparagus within 5 days of a spot
treatment application.
Post-Harvest in Asparagus
USE INSTRUCTIONS: This product may be applied for weed control after the
last harvest of asparagus and all spears have been removed. If spears are
allowed to re-grow, delay application until ferns have developed and make the
application as a directed or shielded spray in order to avoid contact of this
product with ferns, stems or spears. See additional use instructions in the
“APPLICATION EQUIPMENT AND TECHNIQUES” section of this label.
PRECAUTIONS: Direct contact of this product with asparagus could result
in serious crop injury.
10.0 TREE, VINE AND SHRUB CROPS
THIS SECTION PROVIDES DIRECTIONS FOR USE THAT APPLY TO ALL TREE,
VINE, AND SHRUB CROPS LISTED IN THE FOLLOWING SECTIONS. SEE
THE INDIVIDUAL CROP SECTIONS FOR SPECIFIC DIRECTIONS FOR USE,
PREHARVEST INTERVALS, PRECAUTIONS AND RESTRICTIONS.
TYPES OF APPLICATION: Preplant (site preparation); Broadcast Spray;
Selective Equipment (shielded sprayer, wiper applicator), Directed Spray and
Spot Treatment in Middles (between rows of trees, vines or bushes) and Strips
(within rows of trees, vines or bushes); Site Weed Control; Perennial Grass
Suppression; Cut Stump Application
USE INSTRUCTIONS: Unless specifically prohibited in the individual crop
sections that follow, this product may be applied using a boom sprayer,
controlled droplet applicator (CDA), shielded sprayer, wiper applicator,
handheld or backpack sprayer, lance or orchard gun, in middles (between
rows of trees, vines or bushes) and strips (within rows of trees, vines or
bushes), for weed control or perennial grass suppression in established tree
fruit and nut groves, orchards and vineyards. It may also be used for site
preparation prior to planting or transplanting these crops.
Apply 11 fluid ounces to 3.3 quarts of this product per acre as directed in the
“ANNUAL WEEDS RATE SECTION” and “PERENNIAL WEEDS RATE SECTION”
of this label. Use a higher application rate within a given range when weeds
are stressed, growing in dense populations or greater than 12 inches tall.
Application may be repeated as needed up to a maximum of 7 quarts of this
product per acre per year. See the “PRODUCT INFORMATION” section of this
label for more information on Maximum Application Rates.
PRECAUTIONS:  Use extreme care to avoid contact of this herbicide solution,
spray, drift or mist with foliage or green bark of trunk, branches, suckers, fruit
or other parts of desirable trees, canes and vines. Avoid application when
recent pruning wounds or other mechanical injury have occurred. Contact of
this product with other than matured brown bark could result in serious crop
damage or destruction. Only shielded or directed sprayers may be used in
crops where the potential for crop contact is high, and then only where there
is sufficient clearance. For application in strips (within rows of trees), only
selective equipment (directed sprayer, hooded sprayer, shielded sprayer or
wiper applicator) may be used in order to minimize the potential for overspray
or drift of this product onto the crop. For berry crops, hooded sprayers must
be fully enclosed including top, sides, front and back. Only wiper applicators
or shielded sprayers capable of preventing all contact of this product with
the crop may be used. See additional use instructions and precautions in the
“APPLICATION EQUIPMENT AND TECHNIQUES” section of this label.
RESTRICTIONS: Allow a minimum of 3 days between application of this
product and transplanting.
Middles (between rows)
USE INSTRUCTIONS: This product will control or suppress annual and
perennial weeds and ground covers growing between rows of tree, vine and
shrub crops listed on this label. If weeds are under drought stress, irrigate
prior to application. Reduced weed control could result if weeds have been
recently mowed at the time of application.
TANK MIXTURES: A tank mixture of this product with Goal 2XL may be
applied for annual weed control between rows (middles) of a variety of
tree, vine and shrub crops when weeds are stressed or growing in dense
populations. Application of 11 to 22 fluid ounces of this product per acre plus
an appropriate rate of Goal 2XL will control annual weeds with a maximum
height or length of 6 inches, including crabgrass, common groundsel,
junglerice, common lambsquarters, redroot pigweed, London rocket, common
ryegrass, shepherd’s-purse, annual sowthistle, filaree (suppression),
horseweed/marestail, stinging nettle and common purslane (suppression).
This tank-mix will also control common cheeseweed (malva) and hairy
fleabane with a maximum height or length of 3 inches.
This product may also be applied to row middles in tank mixtures with the
following products.
2,4-D; bromacil; clethodim; diuron; fluazifop-P-butyl; flumioxazin;
glufosinate-ammonium; indaziflam; napropamide; norflurazon; oryzalin;
oxyfluorfen; pendimethalin; penoxsulam; pyraflufen ethyl; rimsulfuron;
saflufenacil; sethoxydim; simazine; thiazopyr
Alion; Chateau Herbicide SW; Devrinol 2-XT ; Devrinol 50-DF; Devrinol
50-DF Ornamental; Devrinol DF-XT ; Devrinol DF-XT Ornamental; Direx
4L; Dri-Clean; Fusilade II Turf & Ornamental; Fusilade DX; Goal 2XL;
GoalTender; Karmex DF; Matrix FNV; Matrix SG; Orchard Master Broadleaf;
Orchard Master CA; Pindar GT ; Poast; Poast Plus; Prowl 3.3 EC; Prowl
H2O; Princep 4L; Princep Caliber 90; Princep Liquid; Rely 280; Select;
Select 2 EC; Select Max Herbicide with Inside Technology; Simazine 4L;
Simazine 4L Flowable; Simazine 90DF; Simazine 90 WDG; Sim-Trol 4L;
Sim-Trol DF; Solicam DF; Surflan AS Agricultural; Surflan AS Specialty;
Surflan Flex; Surflan Flex T&O; Surflan XL 2G; Treevix Powered by Kixor;
Venue; Visor Broadcrop
Ensure that the product used is labeled for application within the crop being
grown. Read and follow label directions for all products in the tank mixture.
Strips (within rows)
TANK MIXTURES: This product may be applied within rows of tree, vine and
shrub crops in tank mixtures with the following products.
2,4-D; bromacil; clethodim; diuron; fluazifop-P-butyl; flumioxazin;
glufosinate-ammonium; indaziflam; napropamide; norflurazon; oryzalin;
oxyfluorfen; pendimethalin; penoxsulam; pyraflufen ethyl; rimsulfuron;
saflufenacil; sethoxydim; simazine; thiazopyr
Alion; Chateau Herbicide SW; Devrinol 2-XT ; Devrinol 50-DF; Devrinol
50-DF Ornamental; Devrinol DF-XT ; Devrinol DF-XT Ornamental; Direx
4L; Dri-Clean; Fusilade II Turf & Ornamental; Fusilade DX; Goal 2XL;
GoalTender; Karmex DF; Matrix FNV; Matrix SG; Orchard Master Broadleaf;
Orchard Master CA; Pindar GT ; Poast; Poast Plus; Prowl 3.3 EC; Prowl
H2O; Princep 4L; Princep Caliber 90; Princep Liquid; Rely 280; Select;
Select 2 EC; Select Max Herbicide with Inside Technology; Simazine 4L;
Simazine 4L Flowable; Simazine 90DF; Simazine 90 WDG; Sim-Trol 4L;
Sim-Trol DF; Solicam DF; Surflan AS Agricultural; Surflan AS Specialty;
Surflan Flex; Surflan Flex T&O; Surflan XL 2G; Treevix Powered by Kixor;
Venue; Visor Broadcrop
Ensure that the product used is labeled for application within the crop being
grown. Read and follow label directions for all products in the tank mixture.
RESTRICTIONS: Do not apply these tank mixtures in Puerto Rico.
Perennial Grass Suppression
This product will suppress perennial grasses such as bahiagrass,
bermudagrass, tall fescue, orchardgrass, Kentucky bluegrass and quackgrass
that are grown as ground covers in tree, vine and shrub crops.
For suppression of tall fescue, fine fescue, orchardgrass and quackgrass,
apply 4 fluid ounces of this product in 10 to 20 gallons of water per acre.
For suppression of Kentucky bluegrass covers, apply 4 fluid ounces of this
product per acre. Do not add ammonium sulfate to the spray mix.
For enhanced results, mow cool-season grass covers in the spring to even
their height and then apply this product 3 to 4 days after mowing.
For suppression of vegetative growth and seedhead inhibition of bahiagrass
for approximately 45 days, apply 4 fluid ounces of this product in 10 to
25 gallons of water per acre 1 to 2 weeks after full green-up or after mowing
to a uniform height of 3 to 4 inches prior to seedhead emergence. For
suppression for up to 120 days, apply 3 fluid ounces of this product per acre
followed by an application of 2 to 3 fluid ounces per acre about 45 days later.
Make no more than two applications per year.
For burndown of bermudagrass, apply 22 to 44 fluid ounces of this product in
3 to 20 gallons of water per acre. Make this application only if a reduction of
the bermudagrass stand can be tolerated. When burndown is required prior to
harvest, make the application a minimum of 21 days prior to harvest to allow
sufficient time for burndown to occur.
For suppression of bermudagrass, apply 4 to 11 fluid ounces of this product
per acre east of the Rocky Mountains and 11 fluid ounces west of the Rocky
Mountains in a total spray volume of 3 to 20 gallons per acre no sooner
than 1 to 2 weeks after full green-up. If the bermudagrass is mowed prior
to application, maintain a minimum of 3 inches in height. Sequential
applications may be made when re-growth occurs and bermudagrass injury
10

and stand reduction can be tolerated. East of the Rocky Mountains, apply 4 to
7 fluid ounces of this product per acre in shaded conditions or where a lesser
degree of suppression is desired.
Cut Stump Application
Application of this product to a freshly cut tree stump may be made during site
preparation or site renovation to control re-growth and re-sprouting of stumps
of many tree species, some of which are listed below.
Citrus Trees : Calamondin; Chironja; Citron; Citrus hybrids; Grapefruit;
Kumquat; Lemon; Lime; Mandarin (tangerine); Orange (all); Pummelo;
Tangelo (ugli); Tangor
Fruit Trees: Apple; Apricot; Cherry (sweet, sour); Crabapple; Loquat; Mayhaw;
Nectarine; Olive; Peach; Pear; Plum/Prune (all); Quince
Nut Trees : Almond; Beechnut; Brazil nut; Butternut; Cashew; Chestnut;
Chinquapin; Filbert (hazelnut); Hickory nut; Macadamia; Pecan; Pistachio;
Walnut (black, English)
USE INSTRUCTIONS: Cut the tree close to the soil surface and immediately
apply a 50- to 100-percent (undiluted) solution of this product to the freshly
cut surface using application equipment capable of covering the entire
cambium. A delay in application could result in reduced performance. For
enhanced results, cut the tree during period of active growth and full leaf
expansion and apply this product.
PRECAUTIONS: DO NOT MAKE A CUT STUMP APPLICATION WHEN THE ROOTS
OF ADJACENT DESIRABLE TREES MIGHT BE GRAFTED TO THE ROOTS OF
THE CUT STUMP , AS INJURY COULD OCCUR IN THE ADJACENT TREES. Some
sprouts, stems or trees can share a common root system. Adjacent trees
having a similar age, height and spacing could be an indicator of a shared
root system. Whether grafted or shared, injury is likely to occur to adjacent
stems or trees when this product is applied to one or more trees sharing a
common root system.
10.1 Berry and Small Fruit Crops
LABELED CROPS: All cultivars, varieties and/or hybrids of Amur River grape;
Aronia berry; Bayberry; Bearberry; Bilberry; Blackberry (including Andean
blackberry, arctic blackberry, bingleberry, black satin berry, boysenberry,
brombeere, California blackberry, Cherokee blackberry, chesterberry, Cheyenne
blackberry, common blackberry, coryberry, darrowberry, dewberry, Dirksen
thornless berry, evergreen blackberry, Himalayaberry, hullberry, lavacaberry,
loganberry, lowberry, Lucretiaberry, mammoth blackberry, marionberry,
mora, mures de ronce, nectarberry, Northern dewberry, olallieberry, Oregon
evergreen berry, phenomenalberry, rangeberry, ravenberry, rossberry, Shawnee
blackberry, Southern dewberry, tayberry, youngberry, zarzamora); Blueberry
(highbush, lowbush); Buffaloberry; Che; Chilean guava; Chokecherry;
Cloudberry; Cranberry (including highbush); Currant (black, Buffalo, red,
native); Elderberry; European barberry; Gooseberry; Grape; Honeysuckle
(edible); Huckleberry; Jostaberry; Juneberry (Saskatoon berry); Kiwifruit (fuzzy,
hardy); Ligonberry; Maypop; Mountain pepper berries; Mulberry; Muntries;
Partridgeberry; Phalsa; Pincherry; Raspberry (black, red, wild); Riberry; Salal;
Schisandra berry; Sea buckthorn; Serviceberry; Strawberry
TYPES OF APPLICATION: Those listed in Section 10.0
PRECAUTIONS: To avoid damage, spray solutions of this product must not
be allowed to contact desirable vegetation, including green shoots, canes or
foliage. In the northeast and Great Lakes regions, apply this product in grape
vineyards prior to the end of the bloom stage in order to avoid crop injury,
or apply using a shielded sprayer or wiper applicator.  USE THIS PRODUCT
WITH EXTREME CARE AROUND RASPBERRY , AS SERIOUS CROP DAMAGE CAN
OCCUR IF ANY PART OF THE VINE COMES INTO CONTACT WITH THIS PRODUCT.
To the extent consistent with applicable law, grower assumes all responsibility
for crop losses resulting from misapplication of this product.
RESTRICTIONS: Allow a minimum of 3 days between application of this
product and transplanting.  Allow a minimum of 30 days between application
and harvest of cranberries or the planting of any crop not listed on this
label. Allow a minimum of 14 days between application and harvest for all
other berry and small fruit crops listed here. Do not apply this product using
selective equipment in kiwifruit.
Spot Treatment
USE INSTRUCTIONS: Spot treatment application using a handheld sprayer
or other appropriate application equipment listed in the “APPLICATION
EQUIPMENT AND TECHNIQUES” section of this label may be used to control
weeds in berry and small fruit crops listed in this section.
For control of weeds growing in dry ditches (interior and perimeter) of
cranberry production areas, drop water level to remove standing water in
ditches and apply a 1- to 2-percent solution of this product with a handheld
sprayer to adequately wet the vegetation only; do not spray to the point of
runoff. To achieve maximum weed control in dry ditches, apply this product
within 1 day after water drawdown to ensure application to actively growing
weeds and allow a minimum of 2 days after application before reintroduction
of water.
RESTRICTIONS: Allow a minimum of 30 days between spot treatment
application and harvest of cranberries. Do not apply directly to water. Use
nozzles that produce medium- to large-sized droplets to minimize spray drift
and avoid crop injury.
Post-Harvest Application in Cranberry Production
USE INSTRUCTIONS: This product may be applied for weed control after the
harvest of berries and small fruits listed in this section. In cranberry bogs,
apply this product after cranberry vines are dormant (after they have turned
red) using a handheld sprayer, wiper applicator or any other appropriate
application equipment listed in the “APPLICATION EQUIPMENT AND
TECHNIQUES” section of this label. With a handheld sprayer, apply a 0.4- to
0.7-percent solution of this product to adequately wet the vegetation only; do
not spray to the point of runoff. With a handheld boom sprayer, apply 44 to
86 fluid ounces of this product per acre.
PRECAUTIONS: Even though vines appear dormant, contact of this product
with desirable vegetation could result in damage or severe plant injury.
Cranberry plants that are directly sprayed could be killed.
RESTRICTIONS: Apply this product only after cranberries have been harvested.
Do not apply to more than 10 percent of the total bog. Allow a minimum of
6 months between post-harvest application and the next harvest of cranberries.
Do not apply using aerial application equipment. Do not apply directly to water.
10.2 Citrus Fruit Crops
LABELED CROPS: All cultivars, varieties and/or hybrids of Calamondin;
Chironja; Citron; Citrus Hybrids; Grapefruit (including Japanese summer);
Kumquat; Lemon; Lime (including Australian desert lime, Australian finger
lime, Australian round lime, Brown river finger lime, Mount white, New Guinea
wild, Russell river, sweet, and Tahiti); Mandarin (including Mediterranean,
Satsuma); Orange (all); Pummelo; Tangelo; Tangerine (Mandarin); Tangor;
Uniq Fruit (ugli)
TYPES OF APPLICATION: Those listed in Section 10.0
USE INSTRUCTIONS: The following use instructions pertain to application in
Florida and Texas only.
For burndown or control of the weeds listed below, apply this product at the
specified rate in 3 to 30 gallons of water per acre. Where weed foliage is
dense, use 10 to 30 gallons of water per acre.
To control goatweed, apply 44 to 64 fluid ounces of this product in 20 to
30 gallons of water per acre when plants are actively growing. Apply 44 fluid
ounces per acre when plants are less than 8 inches tall and 64 fluid ounces
per acre when plants are greater than 8 inches tall. If goatweed is greater than
8 inches tall, the use of this product in a tank-mix with Krovar I or Karmex
could improve weed control.  Refer to the individual product labels for specific
crops, rates, geographic restrictions and precautionary statements.
Level of Perennial Weed Control at
Various Application Rates
(amount of this product per acre)
Weed Species 22 fl oz 44 fl oz 2 quarts 3.3 quarts
Bermudagrass B — PC C
Guinea grass
  Texas and Florida Ridge B C C C
  Florida Flatwoods — B C C
Para grass B C C C
Torpedograss S — PC C
S = Suppression, PC = Partial Control, B = Burndown, C = Control
RESTRICTIONS: Allow a minimum of 1 day between application and harvest of
citrus fruit crops. For citron groves, apply as a directed spray only.
10.3 Pome Fruit Crops
LABELED CROPS: All cultivars, varieties and/or hybrids of Apple; Azarole;
Crabapple; Loquat; Mayhaw; Medlar; Pear (including Asian pear); Quince
(including Chinese and Japanese quince); Tejocote
TYPES OF APPLICATION: Those listed in Section 10.0
RESTRICTIONS: Allow a minimum of 1 day between application and harvest
of pome fruit.
10.4 Stone Fruit Crops
LABELED CROPS: Apricot; Cherry (sweet, tart); Nectarine; Olive; Peach;
Plum/Prune (all types); Plumcot
TYPES OF APPLICATION: Those listed in Section 10.0
PRECAUTIONS: Avoid application near trees with recent pruning wounds or
other mechanical injury. Apply only near trees that have been planted in the
orchard for a minimum of 2 years. ENSURE THAT NO PART OF A PEACH TREE
IS CONTACTED WITH OVERSPRAY OR DRIFT OF THIS PRODUCT.
RESTRICTIONS: Allow a minimum of 17 days between application and harvest
of stone fruit. In olive groves, apply as a directed spray only. Remove suckers
and low-hanging limbs a minimum of 10 days prior to application.
10.5 Tree Nut Crops
LABELED CROPS: Almond; Beechnut; Betelnut; Brazil nut; Butternut; Cashew;
Chestnut; Chinquapin; Coconut; Filbert (hazelnut); Hickory nut; Macadamia;
Pecan; Pine nut; Pistachio; Walnut (black, English)
TYPES OF APPLICATION: Those listed in Section 10.0
RESTRICTIONS: Allow a minimum of 3 days between application and harvest
of tree nuts, except coconut. Allow a minimum of 14 days between application
and harvest of coconut.
10.6 Tropical and Subtropical Trees
 and Fruit Crops
LABELED CROPS: Ambarella; Atemoya; Avocado; Banana; Barbados
cherry (acerola); Biriba; Blimbe; Breadfruit; Cacao (cocoa) bean; Canistel;
Carambola (starfruit); Cherimoya; Coffee; Custard apple; Dates; Durian;
Feijoa; Figs; Governor’s plum; Guava; Ilama; Imbe; Imbu; Jaboticaba;
Jackfruit; Longan; Lychee; Mamey apple; Mango; Mangosteen; Marmaladebox
(genip); Mountain papaya; Noni (Indian mulberry); Papaya; Pawpaw; Plantain;
Persimmon; Pomegranate; Pulasan; Rambutan; Rose apple; Sapodilla; Sapote
(black, mamey, white); Spanish lime; Soursop; Star apple; Sugar apple;
Surinam cherry; Tamarind; Tea; Ti; Wax jambu
TYPES OF APPLICATION: Those listed in Section 10.0, and as a Bananacide
(banana only)
RESTRICTIONS: Allow a minimum of 1 day between application and harvest
in banana, coffee, guava, papaya, and plantain crops. Allow a minimum of
14 days between application and harvest of all other tropical and subtropical
tree fruit listed here. In coffee and banana, delay application a minimum
of 3 months after transplanting to allow the new coffee or banana plant to
become established.
Bananacide (Banana Only)
USE INSTRUCTIONS: This product may be used to destroy banana plants
infected with the Banana Bunchy Top Virus, as well as non-infected banana
plants, in order to establish a disease-free buffer around a plantation. Remove
all fruit from the plants within the area prior to treatment. Inject 0.04 fluid
ounce (1 milliliter) of this concentrated product (undiluted) for every 2 to
3 inches of pseudostem diameter of the banana plant to be controlled. Make
the injection at least one foot above the ground, except for very small plants,
which can be injected vertically into the top. Any subsequent re-growth must
also be destroyed. Mechanically destroy all plants and mats (or units) within
a 4-foot radius around a treated mat.
11

For control of the Banana Bunchy Top Virus, it is critical that the grower follow
a strict control program involving monitoring for diseased plants, spraying to
control the aphid vector, and destruction of all infected mats (or units). An
infected plant might not show symptoms of the Banana Bunchy Top Virus
for as many as 125 days; therefore, it is critical that the entire mat (or unit)
containing the diseased plant be destroyed immediately.
RESTRICTIONS: Do not apply more than 0.5 fluid ounce (15 milliliters) of
this product per mat (or unit). Do not harvest any fruit or plant material from
treated mats (or units) following injection. Do not allow livestock to consume
treated plant material. Following transplant of new banana plants into treated
areas, allow plants to become established for a minimum of 3 months before
applying this product for weed control.
10.7 Vine Crops
LABELED CROPS: Hops; Passion fruit
TYPES OF APPLICATION: Those listed in Section 10.0
USE INSTRUCTIONS: Apply this product for weed control only when green
shoots, canes or foliage are not in the spray zone.
RESTRICTIONS: Allow a minimum of 14 days between application and harvest
of these vine crops.
10.8 Miscellaneous Tree Food Crops
LABELED CROPS: Cactus (all, including prickly pear, dragon fruit); Palm
TYPES OF APPLICATION: Those listed in Section 10.0
10.9 Non-Food Tree Crops
LABELED CROPS: Pine; Poplar; Eucalyptus; Christmas trees; all other
non-food tree crops
TYPES OF APPLICATION: Those listed in Section 10.0
PRECAUTIONS: Avoid contact of spray, drift or mist of this product with foliage
or green bark of established Christmas trees and other pine trees. Desirable
plants can be protected from the spray solution by using shields or coverings
of impermeable materials.
RESTRICTIONS: DO NOT apply this product as a broadcast application over the
top of plantations or tree crops.
Site Preparation
USE INSTRUCTIONS: This product may be used for weed control prior to
planting non-food tree crops.
PRECAUTIONS: Protect non-target plants from being sprayed with this product
during site preparation application.
Directed Spray, Spot Treatment, Wiper Applicator
USE INSTRUCTIONS: This product may be applied as a post-directed spray
or spot treatment, or applied using a wiper applicator, around established
Christmas trees, eucalyptus, poplar, and all other non-food tree crops.
11.0 PASTURE GRASSES, FORAGE LEGUMES
 AND RANGELAND
USE INSTRUCTIONS: Refer to the “ANNUAL WEEDS RATE SECTION” and
“PERENNIAL WEEDS RATE SECTION” of this label for application rates of this
product for specific weeds. When applied as directed, this product will control
those annual and perennial grasses and broadleaf weeds listed.  Application
rates specified on this label for hard-to-control weeds, or those specified on
separate supplemental labeling for this product, supersede rates listed in the
“ANNUAL WEEDS RATE SECTION,” “PERENNIAL WEEDS RATE SECTION” and
“WOODY BRUSH, TREES AND VINES RATE SECTION” of this label. Additional
information on hard-to-control weeds can be found on Fact Sheets published
for this product.
11.1 Alfalfa, Clover, and Other Forage Legumes
LABELED CROPS: Alfalfa; Clover; Kenaf; Kudzu; Lespedeza; Leucaena; Lupin;
Sainfoin; Trefoil; Velvet bean; Vetch (all types)
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Spot Treatment;
Wiper Applicator; Preharvest (except kenaf and leucaena); Stand Removal
For directions for use with Roundup Ready alfalfa, see the “ROUNDUP READY
CROPS” section of this label.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after
planting crops listed in this section, but prior to crop emergence.
RESTRICTIONS: Remove domestic livestock before application.
Spot Treatment, Wiper Applicator
USE INSTRUCTIONS: This product may be applied as a spot treatment or over
the top of crops listed in this section using a wiper applicator. See additional
instructions on the use of wiper applicators in the “APPLICATION EQUIPMENT
AND TECHNIQUES” section of this label. Application may be repeated in the
same area at 30-day intervals.
RESTRICTIONS: For spot treatment and use with a wiper applicator, apply in
areas where the movement of domestic livestock can be controlled. Remove
domestic livestock before application and wait a minimum of 3 days after
application before grazing livestock or harvesting. Do not apply this product to
more than 10 percent of the total field area at any one time.
Weed Control in Dormant Alfalfa
USE INSTRUCTIONS: This product will control or suppress many weeds,
including quackgrass, downy brome and cheatgrass in dormant alfalfa. Apply
6 to 8 fluid ounces of this product per acre in the spring when alfalfa is
dormant, after spring temperatures have warmed enough to encourage weed
growth, but prior to initiation of trifoliate leaf expansion of the alfalfa crop.
Application made after expansion of the first trifoliate leaf will cause growth
reduction and reduced crop yield.
PRECAUTIONS:  Improper application of this product to alfalfa can cause crop
injury. Do not use this product on dormant alfalfa if a slight yield reduction
in the first cutting cannot be tolerated. Slight discoloration of the alfalfa crop
could occur, but will re-green and resume growth under moist soil conditions
as effects of this product wear off.
RESTRICTIONS: Do not add ammonium sulfate to spray solutions of this
product for application to dormant alfalfa. Do not make more than one
application per year. Allow a minimum of 36 hours after application before
grazing livestock or harvesting.
Preharvest (Except Kenaf and Leucaena), Stand Removal
USE INSTRUCTIONS: This product may be applied as a broadcast application
prior to harvest (except in kenaf and leucaena) in declining stands or in any
stand where severe crop injury or destruction is acceptable, or to remove
an established stand of any forage legume listed in this section. Application
may be made at any time of the year to control annual and perennial
weeds, including quackgrass. For control of quackgrass, apply in the spring,
late-summer or fall when quackgrass is actively growing. Application for
quackgrass control must be followed by deep tillage for complete control. If
the crop is to be harvested or grazed by livestock, apply up to 44 fluid ounces
of this product per acre in alfalfa and up to 32 fluid ounces per acre in all other
legumes listed in this section. For complete removal of established stands of
clover, it might be necessary to use a higher application rate, as listed in the
“PERENNIAL WEEDS RATE SECTION” of this label.
PRECAUTIONS: This application can destroy an alfalfa stand and severely
injure or destroy other legume crops listed, such as clover. Preharvest
application on alfalfa grown for seed could result in a reduction in germination
or vigor.  To the extent consistent with applicable law, buyer and all users are
responsible for any and all loss or damage in connection with the preharvest
use of this product on alfalfa grown for seed.
RESTRICTIONS: Make only one application to an existing crop stand per year.
Remove domestic livestock before application. Foliage within the application
area can be harvested and fed to livestock according to the application rates
and intervals defined in the following table. If applying at a rate greater than
those listed here, do not harvest foliage for livestock feed or allow livestock to
graze within the application area.
Crop
Maximum Single
Preharvest
Application Rate
(per acre)
Minimum Interval
Between Application
and Harvest or
Livestock Grazing
Alfalfa 44 fluid ounces 36 hours
All other legumes listed 32 fluid ounces 3 days
Crops listed on this label may be planted into the application area at any time;
all other crops may be planted 30 days after application.
11.2 Conservation Reserve Program (CRP)
TYPES OF APPLICATION: Postemergence Weed Control in Dormant CRP
Grasses; Wiper Applicator; Renovation (rotating out of CRP); Site Preparation
Postemergence Weed Control in Dormant CRP Grasses, Wiper Applicator
USE INSTRUCTIONS: Apply this product to suppress competitive growth and
seed production of undesirable vegetation on CRP land. Application may
be made using a wiper applicator to control tall weeds, or as a broadcast
application or spot treatment to dormant CRP grasses. For selective weed
control using broadcast application equipment, apply 5 to 8 fluid ounces
of this product per acre in early-spring before desirable CRP grasses, such
as crested and tall wheatgrass, break dormancy and initiate green growth.
Late-fall application may be made after desirable perennial grasses have
reached dormancy.
PRECAUTIONS: Some stunting of CRP perennial grasses will occur if
broadcast application is made when plants are not dormant.
RESTRICTIONS: Do not apply more than 2 quarts of this product per acre per
year onto CRP land. No waiting period is required between application and
grazing or harvesting for feed.
Renovation (Rotating Out of CRP), Site Preparation
USE INSTRUCTIONS: This product may be used to prepare CRP land for crop
production. Refer to federal, state or local use guides for CRP renovation
information.
RESTRICTIONS: Crops listed on this label may be planted into the area at any
time; all other crops may be planted 30 days after application.
11.3 Grass Seed and Sod Production
LABELED CROPS: Any grass ( Gramineae family), except Corn, Sorghum,
Sugarcane and those listed in the “CEREAL AND GRAIN CROPS” section of
this label
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Renovation;
Removal of Established Stands; Site Preparation; Shielded Sprayer; Wiper
Applicator; Spot Treatment; Creating Rows in Annual Ryegrass
Preplant, At-Planting, Preemergence, Renovation, Removal of
Established Stand, Site Preparation
USE INSTRUCTIONS: This product controls most existing vegetation for
purposes of renovating turf or forage grass seed production areas, or for
establishing turfgrass grown for sod. This product may be used to destroy
undesirable grass vegetation when production fields are converted to
alternative species or crops. Do not disturb soil or underground plant parts
before application and delay tillage or renovation techniques, including
vertical mowing, coring and slicing, for a minimum of 7 days after application
to allow for herbicide translocation into underground plant parts.
Apply before, during or after planting, or for renovation purposes. Where
existing vegetation is growing under mowed turfgrass management, apply this
product after omitting at least one regular mowing to allow sufficient growth
for good interception of the herbicide spray. For maximum control of existing
vegetation, delay planting until determining if any re-growth of underground
plant parts will occur. Where repeat applications are necessary, sufficient
re-growth must be attained prior to application. For warm-season grasses,
such as bermudagrass, summer or fall application provides enhanced control.
Broadcast application of this product may be used to control sod remnants
or other unwanted vegetation after sod is harvested. Application rates of up
to 3.3 quarts per acre may be used to totally remove an established stand of
hard-to-kill grass species.
RESTRICTIONS: If application rate is 2 quarts of this product per acre or
less, no waiting period between application and feeding or livestock grazing
is required. If the rate is greater than 2 quarts per acre, remove domestic
livestock before application and wait 8 weeks after application before grazing
or harvesting. Crops listed on this label may be planted into the area at any
time; all other crops may be planted 30 days after application.
Shielded Sprayer
USE INSTRUCTIONS: Apply 22 to 64 fluid ounces of this product in 10 to
20 gallons of water per acre using a shielded sprayer to control weeds
between grass seed rows. Uniform planting in straight rows will aid shielded
sprayer application. Enhanced results can be obtained when the grass seed
12

crop is small enough to easily pass by the protective shields. See additional
instructions on the use of shielded sprayers in the “APPLICATION EQUIPMENT
AND TECHNIQUES” section of this label.
PRECAUTIONS: Contact of this product in any manner to any vegetation to
which application is not intended could cause damage.
Wiper Applicator
USE INSTRUCTIONS: This product may be applied over the top of desirable
grasses using a wiper applicator for the control of tall weeds. See additional
instructions on the use of wiper applicators in the “APPLICATION EQUIPMENT
AND TECHNIQUES” section of this label.
PRECAUTIONS: Droplets, mist, foam or splatter of the herbicide solution
settling onto desirable vegetation could result in discoloration, stunting or
destruction.
Spot Treatment
USE INSTRUCTIONS: Apply a 1-percent solution of this product using a
handheld sprayer to control weeds within established vegetation prior
to heading of grasses grown for seed or to control sod remnants or other
unwanted vegetation after sod is harvested.
PRECAUTIONS: This product will kill the desirable grasses along with the
weeds. Take care not to spray or allow spray to drift outside the target area in
order to avoid unwanted crop destruction.
Creating Rows in Annual Ryegrass
USE INSTRUCTIONS: Use low-pressure nozzles or drop nozzles designed to
target the application over a narrow band. Set nozzle height to establish the
desired row spacing and apply 11 to 22 fluid ounces of this product per acre.
Enhanced results can be obtained when application is made before ryegrass
reaches 6 inches in height. Use a higher application rate within this range
when ryegrass is greater than 6 inches in height.
PRECAUTIONS: Take care not to spray or allow spray to drift outside target
area in order to avoid unwanted crop destruction. To the extent consistent
with applicable law, grower assumes all responsibility for crop losses resulting
from misapplication of this product.
11.4 Pastures
LABELED CROPS: Bahiagrass; Bermudagrass; Bluegrass; Brome; Fescue;
Guinea grass; Kikuyu grass; Orchardgrass; Pangola grass; Ryegrass; Timothy;
Wheatgrass and any grass (Gramineae family), except Corn, Sorghum, Sugarcane
and those listed in the “CEREAL AND GRAIN CROPS” section of this label
TYPES OF APPLICATION: Preplant; Preemergence; Pasture Renovation; Spot
Treatment; Wiper Applicator; Postemergence Weed Control (broadcast application)
Preplant, Preemergence, Pasture Renovation
USE INSTRUCTIONS: This product may be applied for weed control prior to
planting or emergence of forage grasses. This product may also be applied
to control perennial pasture species listed on this label prior to re-planting.
RESTRICTIONS: If application rates total 2 quarts of this product per acre or
less, no waiting period between application and feeding or livestock grazing
is required. If the rate is greater than 2 quarts per acre, remove domestic
livestock before application and wait 8 weeks after application before grazing
or harvesting. Crops listed on this label may be planted into the area at any
time; all other crops may be planted 30 days after application.
Spot Treatment, Wiper Applicator
USE INSTRUCTIONS: This product may be applied in pastures as a spot
treatment or over the top of desirable grasses using a wiper applicator to
control tall weeds. To achieve maximum performance, remove domestic
livestock before application and wait a minimum of 7 days after application
before grazing livestock or harvesting for feed. See additional instructions
on the use of wiper applicators in the “APPLICATION EQUIPMENT AND
TECHNIQUES” section of this label.
RESTRICTIONS: For spot treatment or use with a wiper applicator at rates of
2 quarts per acre or less, this product may be applied over the entire pasture
or any portion of it. At rates above 2 quarts per acre, this product may be
applied over no more than 10 percent of the total pasture at any one time.
Application may be repeated on the same area at 30-day intervals.
Postemergence Weed Control (Broadcast Application)
USE INSTRUCTIONS:  This product may be applied in pastures to suppress
competitive growth and seed production of annual weeds and other undesirable
vegetation. For selective weed control using broadcast application equipment,
apply 8 to 11 fluid ounces of this product per acre in early-spring before
desirable perennial grasses break dormancy and initiate green growth.
Late-fall application may be made after desirable perennial grasses have
reached dormancy.
PRECAUTIONS: Some stunting of perennial grasses will occur if broadcast
application is made when plants are not dormant. Higher application rates
may be used for hard-to-control weeds; however, higher rates will cause
stand reduction.
RESTRICTIONS: No waiting period is required between application and grazing
or harvesting for feed. Do not apply more than 2 quarts of this product per acre
per year onto pasture grasses except for renovation use as described on this
label. If replanting is needed due to severe stand reduction, wait a minimum
of 30 days after application before planting any crop not listed on this label.
11.5 Rangeland
TYPES OF APPLICATION: Postemergence
USE INSTRUCTIONS: This product will control or suppress many annual
weeds growing on perennial cool- and warm-season grass rangeland.  Slight
discoloration of the desirable grasses could occur, but will re-green and
resume growing under moist soil conditions as effects of this product wear off.
Preventing seed production is critical to the control of invasive annual grassy
weeds on rangeland. Follow-up applications in sequential years can be
used to eliminate most of the viable seeds. Delay grazing of the area after
application of this product to allow desirable perennials to grow, flower and
re-seed the area.
Apply 8 to 11 fluid ounces of this product per acre to control or suppress many
weeds, including downy brome, cheatgrass, cereal rye and jointed goatgrass
on rangeland. Apply when most mature brome plants are in early flower and
before the plants, including seedheads, turn color. Allowing for secondary
weed flushes to occur after spring rains further depletes the seed reserve and
encourages perennial grass conversion on weedy sites. Apply this product in
the fall in areas where spring moisture is normally limited and fall germination
allows for good weed growth and weed seed depletion.
For control of medusahead, apply 11 fluid ounces of this product per acre at
the 3-leaf stage. Delaying application beyond this stage will result in reduced
or unacceptable control. Controlled burning prior to application can be useful
in eliminating the thatch layer produced by slowly decaying culms. Allow new
growth to occur before applying this product after a burn. Repeat applications
in subsequent years are necessary to eliminate the seedbank before
re-establishing desirable perennial grasses in medusahead-dominated
rangeland.
RESTRICTIONS: Do not apply more than 2 quarts of this product per acre
per year on rangeland. Do not add ammonium sulfate to the spray mixture
when applying this product on rangeland grasses. No waiting period between
application and feeding or livestock grazing is required.
12.0 ROUNDUP READY CROPS
ROUNDUP READY CROPS CONTAIN A PATENTED GENE THAT PROVIDES
TOLERANCE TO GLYPHOSATE, THE ACTIVE INGREDIENT IN THIS PRODUCT.
THIS PRODUCT WILL CAUSE SEVERE CROP INJURY OR DESTRUCTION AND
YIELD LOSS IF APPLIED TO CROPS THAT ARE NOT GLYPHOSATE TOLERANT.
AVOID CONTACT OF THIS PRODUCT WITH FOLIAGE, GREEN STEMS, OR
FRUIT OF CROPS, OR ANY DESIRABLE PLANTS THAT DO NOT CONTAIN A
GLYPHOSATE-TOLERANCE GENE, AS SEVERE PLANT INJURY OR DESTRUCTION
WILL RESULT. Information on Roundup Ready crops can be obtained from your
seed supplier or Bayer CropScience LP representative. Roundup Ready crops
must be purchased from an authorized licensed seed supplier.
The directions for use in the sections that follow, or those published separately
on supplemental labeling for this product, include all applications of this
product that may be made onto a specified Roundup Ready crop during the
complete cropping season. DO NOT combine these directions for use with the
directions for use with the same crops listed in the “ANNUAL AND PERENNIAL
CROPS” and “PASTURE GRASSES, FORAGE LEGUMES AND RANGELAND”
sections of this label, which are intended for crops that do not contain a
glyphosate-tolerance gene.
NOTE: Roundup Ready seed and the method of selectively controlling weeds
in a Roundup Ready crop are protected under several U.S. Patents, including
5,352,605 and 5,633,435. A license to use Roundup Ready seed must be
obtained prior to planting. Bayer CropScience LP retains ownership of the
gene and process technologies, and the Purchaser of the seed receives the
right to use the licensed genes and technologies subject to the limited use
license conditions. Seed containing a Roundup Ready trait cannot be used
for research and demonstration, reverse engineering or in connection with
herbicide registration. Progeny seed containing a Roundup Ready trait may
not be saved for replanting or transferred to others for replanting. Contact
your Authorized Bayer CropScience LP for information on obtaining a limited
use license.
USE INSTRUCTIONS: Refer to the “ANNUAL WEEDS RATE SECTION” and
“PERENNIAL WEEDS RATE SECTION” of this label for application rates for
specific weeds. When applied as directed, this product will control the annual
and perennial grasses and broadleaf weeds listed. Observe the maximum
application rates and crop stage timings specified for individual Roundup
Ready crops in the sections that follow.
Sprayer Preparation: It is important that sprayer and mixing equipment be
clean and free of pesticide residue before being used to apply this product
over the top of Roundup Ready crops. Follow the cleaning procedures
specified on the label of the product(s) previously used. THOROUGHLY CLEAN
THE SPRAY TANK AND ALL LINES AND FILTERS TO ELIMINATE POTENTIAL
CONTAMINATION FROM OTHER HERBICIDES PRIOR TO MIXING AND APPLYING
THIS PRODUCT.
ATTENTION: AVOID DRIFT. USE EXTREME CARE WHEN APPLYING THIS
PRODUCT TO PREVENT INJURY TO DESIRABLE PLANTS AND CROPS THAT DO
NOT CONTAIN A GLYPHOSATE-TOLERANCE GENE.
Ground broadcast application  – Apply this product in 5 to 20 gallons of
spray solution per acre, unless otherwise directed. Select proper nozzles and
spray pressure settings to avoid spraying a fine mist. For enhanced results
with ground application equipment, use flat-fan nozzles. Check for even
distribution of spray droplets.
Aerial application  – Unless otherwise prohibited, all applications of this
product described in this section may be made using aerial application
equipment, where appropriate, provided that the applicator complies with the
precautions and restrictions specified on this label and on all supplemental
labeling published separately for this product. Apply this product in 3 to
15 gallons of water per acre. See the “APPLICATION EQUIPMENT AND
TECHNIQUES” section of this label for important information on aerial
application and procedures for avoiding spray drift that could cause injury to
any vegetation not intended for application. Use of appropriate buffer zones
will help prevent injury to adjacent vegetation.
See the “MIXING” and “APPLICATION EQUIPMENT AND TECHNIQUES” sections
of this label for additional directions and restrictions on the application of
this product.
TANK MIXTURES: Tank mixtures of this product with other herbicides,
insecticides, fungicides, micronutrients or foliar fertilizers could result in
reduced weed control or crop injury when applied over the top of Roundup
Ready crops. Read the label of all products used in the tank mixture prior to
use to determine the potential for crop injury. Always read and follow label
directions for all products in the tank mixture. Use all products according
to rates and timing specified on the product label. Always predetermine the
compatibility of tank-mix products together in the carrier by mixing small
proportional quantities in advance.  Bayer CropScience LP has not tested this
product with all tank-mix product formulations for compatibility, antagonism
or performance. To the extent consistent with applicable law, buyer and all
users are responsible for any and all loss or damage in connection with the
use or handling of mixtures of this product with herbicides or other materials
that are not specifically listed on this label or on separate supplemental
labeling or Fact Sheets for this product. See the “MIXING” section of this label
for more information on tank mixtures.
Unless otherwise directed, nonionic surfactant may be added to the spray
solution for application to Roundup Ready crops. The addition of certain
surfactants to a spray solution of this product could result in some crop
response including leaf speckling or leaf necrosis due to the surfactant.
Refer to the individual Roundup Ready crop sections that follow, or to separate
supplemental labeling, for additional precautions or restrictions on the use
of surfactants. Refer to the “MIXING” section of this label for additional
information on the use of surfactants with this product.
13

Ammonium sulfate may be added to spray solutions of this product for
application to Roundup Ready crops. Refer to the “MIXING” section of this
label for instructions on the use of ammonium sulfate.
The following use directions are based on a clean start at planting by
using a burndown application or tillage to control existing weeds before
crop emergence. In no-till and stale seedbed systems, apply this product
as a preplant burndown application to control existing weeds prior to crop
emergence. Some weeds, such as black nightshade, broadleaf signalgrass,
sicklepod, Texas panicum, sandbur, annual morning glory, woolly cupgrass,
shattercane, wild proso millet, burcucumber, and giant ragweed with multiple
germination times, or suppressed (stunted) weeds, might require a second
application of this product for complete control.  Make second application
after some re-growth has occurred and a minimum of 10 days after a previous
application of this product.
Application rates of this product specified on this label for hard-to-control
weeds, or those specified on separate supplemental labeling for this product,
supersede rates in the “ANNUAL WEEDS RATE SECTION” and “PERENNIAL
WEEDS RATE SECTION” of this label. Additional information on hard-to-control
weeds can be found on Fact Sheets published for this product.
RESTRICTIONS: Observe the maximum application rates stated throughout
this label. Maximum application rates apply to the use of this product
combined with the use of any and all other herbicides containing glyphosate,
whether applied separately or as mixtures. Calculate the application rates
(glyphosate acid equivalents) and ensure that the total use of this and other
glyphosate-containing products does not exceed the stated maximum rate.
See the “PRODUCT INFORMATION” section of this label for more information
on Maximum Application Rates. When applying this product as a tank mixture
with one or more products, refer to each individual tank-mix product label for
restrictions and apply the tank mixture in accordance with the most restrictive
statements for each product in the tank.
12.1 Roundup Ready Alfalfa
TYPES OF APPLICATION: Preplant; At-planting; Preemergence; Postemergence
(In-crop)
USE INSTRUCTIONS: Refer to the following table for maximum application
rates of this product.
Maximum Application Rates
Combined total per year for all applications,
including Preplant during year of establishment
5.3 quarts per acre
Preplant, At-planting and Preemergence single
application
44 fluid ounces per acre
Combined total per year for In-crop application on
newly established and established stands
4.1 quarts per acre
See the “ROUNDUP READY CROPS” section of this label for information
regarding the use of this product in Roundup Ready crops.  See the “PRODUCT
INFORMATION” section of this label for more information on Maximum
Application Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after
planting Roundup Ready alfalfa.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied over the top of Roundup
Ready alfalfa (in-crop) from emergence until 5 days prior to cutting. To
maximize crop yield and quality potential of the forage and hay, apply this
product after weeds have emerged, but before alfalfa growth or re-growth
interferes with spray coverage of the target weeds.
Refer to the “ANNUAL WEEDS RATE SECTION” and “PERENNIAL WEEDS
RATE SECTION” of this label for application rates for specific weeds. When
applied as directed, this product will control the annual and perennial grasses
and broadleaf weeds listed. This product will also suppress or control the
parasitic weed dodder ( Cuscuta spp.) in Roundup Ready alfalfa.  More than
one application might be necessary for complete control.
PRECAUTIONS: Freezing or near freezing conditions, or large temperature
swings, within 5 days after application of this product to Roundup Ready
alfalfa could result in a limited, temporary crop response.
New Stand Establishment (Seeding Year) – Due to the biology and breeding
constraints of alfalfa, up to 10 percent of the seedlings will not contain a
Roundup Ready gene and will not survive after the first application of this
product. To eliminate the undesirable effects of stand gaps created by this loss
of plants, make a single application of at least 22 fluid ounces of this product
per acre at or before the 4-trifoliate growth stage. Refer to the following table
for application rates during stand establishment (seeding year).
NEW STAND ESTABLISHMENT (Seeding Year)
Application Rates
Prior to First Cutting
From emergence up to 4 trifoliate leaves 22 to 44 fluid ounces per acre
From 5 trifoliate leaves up to 5 days
before first cutting
Up to 44 fluid ounces per acre
After First Cutting
In-crop application, per cutting, up to
5 days before cutting
Up to 44 fluid ounces per acre
TANK MIXTURES: Up to 44 fluid ounces of this product per acre may be applied
postemergence (in-crop) over the top of Roundup Ready alfalfa in the seeding
year in a tank-mix with the following products after weeds have emerged, but
before alfalfa growth or re-growth interferes with spray coverage of the target
weeds. Ensure that the product used in the tank-mix is labeled for application
postemergence (in-crop) to alfalfa. Read and follow label directions for all
products in the tank mixture.
clethodim; imazamox; imazethapyr; sethoxydim; quizalofop p-ethyl
Assure II; Poast; Poast Plus; Pursuit; Raptor; Select 2 EC; Select Max
Herbicide with Inside Technology
Pursuit or Raptor applied to seedling alfalfa could result in a temporary
reduction in growth.  Do not include crop oil concentrate or methylated seed
oil in tank mixtures of this product with Pursuit or Raptor as unsatisfactory
crop injury could result.
Established Stands (Non-seeding Year) – Refer to the following table for
directions and application rates for in-crop application to established stands
of alfalfa (non-seeding year).
ESTABLISHED STANDS (Non-seeding Year)
Application Rates
In-crop application, per cutting, up to 5
days before cutting
Up to 44 fluid ounces per acre
TANK MIXTURES: This product may be applied postemergence (in-crop) over
the top of established stands of Roundup Ready alfalfa in tank mixtures
described below according to the growing condition of the crop. Ensure that
the product used is labeled for application postemergence (in-crop) to alfalfa.
Read and follow label directions for all products in the tank mixture.
Actively growing alfalfa:  For control of emerged annual grasses and
broadleaf weeds when alfalfa is actively growing, this product may be
applied at up to 44 fluid ounces per acre in a tank mixture with the following
herbicides.
clethodim; imazamox; imazethapyr; sethoxydim; quizalofop-p-ethyl
Assure II; Poast; Poast Plus; Pursuit; Raptor; Select 2 EC; Select Max
Herbicide with Inside Technology
Do not include crop oil concentrate or methylated seed oil in tank mixtures of
this product with Pursuit or Raptor as unsatisfactory crop injury could result.
Dormant alfalfa:  For control of emerged annual grasses and broadleaf
weeds when alfalfa is dormant, this product may be applied at up to 44 fluid
ounces per acre in a tank mixture with the following herbicides when daily
temperatures remain above freezing.
imazamox; imazethapyr; metribuzin; pronamide; propyzamide
Kerb 50-W; Kerb SC; Pursuit; Raptor; TriCor 4F; TriCor DF
Do not include crop oil concentrate or methylated seed oil in tank mixtures of
this product with Pursuit or Raptor as unsatisfactory crop injury could result.
PRECAUTIONS: Where Roundup Ready alfalfa is grown with a companion or
cover crop, or is over-seeded with a second species, in-crop (over-the-top)
application of this product will eliminate the non-Roundup Ready
(non-glyphosate-tolerant) species.
RESTRICTIONS: Do not exceed 44 fluid ounces per acre for any single
in-crop application of this product. Sequential applications of this product
must be a minimum of 7 days apart. The combined total per year for all in-crop
applications in both newly established (seeding year) and established stands
(non-seeding year) must not exceed 4.1 quarts (132 fluid ounces) per acre. Do
not apply to frozen or snow covered ground.  Remove domestic livestock before
application. Wait a minimum of 5 days after application before grazing, or cutting
or feeding of forage and hay.
12.2 Roundup Ready Canola (Spring Varieties)
For directions for use of this product on TruFlex™ Roundup Ready ® Canola,
refer to that section of this label. DO NOT combine these directions for use
on Roundup Ready canola with the directions for use on TruFlex™ Roundup
Ready® canola.
Roundup Ready spring canola is defined as those Roundup Ready canola
varieties that are seeded in the spring and harvested in the fall and do not
enter a winter dormancy period.
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence
(In-crop); Postemergence (In-crop) in Hybrid Seed Production Only
USE INSTRUCTIONS: Refer to the following table for the maximum application
rates for this product with spring varieties of Roundup Ready canola.
Maximum Application Rates
Total for all Preplant, At-Planting,
Preemergence applications
44 fluid ounces per acre
Total for all In-crop applications from
emergence to 6-leaf stage
22 fluid ounces per acre
See the “ROUNDUP READY CROPS” section of this label for information
regarding the use of this product in Roundup Ready crops. See the
“PRODUCT INFORMATION” section of this label for more information on
Maximum Application Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after
planting Roundup Ready spring canola.
RESTRICTIONS: Maximum quantity of this product that may be applied
for all preplant, at-planting and preemergence applications combined is
44 fluid ounces per acre per season.
Postemergence (In-crop)
USE INSTRUCTIONS:  This product may be applied postemergence (in-crop)
to spring varieties of Roundup Ready canola from emergence through the
6-leaf stage of development, unless otherwise directed. Application made
during bolting or flowering could result in crop injury and yield loss. To
maximize yield potential, eliminate competing weeds early.
Single Application  – Apply 11 to 16 fluid ounces of this product per
acre no later than the 6-leaf stage for the control of annual weeds. Avoid
overlapping applications as this could result in temporary yellowing, delayed
flowering, and/or growth reduction. Similar crop injury could result when
more than 11 fluid ounces per acre is applied after the 4-leaf stage.
Sequential Application  – Apply 11 fluid ounces of this product per acre
to 1- to 3-leaf canola followed by a sequential application at a minimum
interval of 10 days, but no later than the 6-leaf stage. Sequential application
works better for control of early emerging annual and perennial weeds, such
as Canada thistle and quackgrass, or whenever more than one application
is needed for acceptable weed control.
RESTRICTIONS: No more than two in-crop (over-the-top) broadcast
applications may be made from crop emergence through the 6-leaf stage
of development and the total in-crop application must not exceed 22 fluid
ounces of this product per acre. Allow a minimum of 60 days between
application and canola harvest.
Postemergence (In-crop) in Hybrid Seed Production Only
THIS POSTEMERGENCE APPLICATION IS FOR USE ONLY IN HYBRID CANOLA
SEED PRODUCTION OF BOTH SPRING AND WINTER VARIETIES.  DO NOT
MAKE THIS APPLICATION ON CANOLA GROWN FOR FOOD OR FEED.
This product may be applied at a rate of between 11 and 22 fluid ounces
per acre from emergence until pollination is complete or near completion
for the control of non-glyphosate-tolerant canola pollen parental line(s) in
hybrid canola seed production fields containing both Roundup Ready canola
14

line(s) and non-glyphosate-tolerant line(s). Sequential applications may be
made for the control of non-glyphosate-tolerant pollen parental lines up to a
maximum total application rate of 22 fluid ounces per acre.
RESTRICTIONS: Allow a minimum of 5 days between sequential
applications. Maximum total application rate of this product for
ALL postemergence (in-crop) applications in hybrid canola seed
production fields, including application for weed control and control of
non-glyphosate-tolerant canola, is 22 fluid ounces per acre.
12.3 Roundup Ready  Canola (Winter Varieties)
For directions for use of this product on TruFlex Roundup Ready Canola, refer to
that section of this label.  DO NOT combine these directions for use on Roundup
Ready canola with the directions for use on TruFlex Roundup Ready canola.
Roundup Ready winter canola is defined as those Roundup Ready canola
varieties that are seeded in early-fall and harvested the following spring or
summer. Winter canola varieties are intended to enter a cold period dormancy
in the winter.
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence
(In-crop)
USE INSTRUCTIONS: Refer to the following table for the maximum application
rates of this product with winter varieties of Roundup Ready canola.
Maximum Application Rates
Total for all Preplant, At-Planting, Preemergence
applications
44 fluid ounces
per acre
Total for all In-crop applications from emergence
to canopy closure or prior to bolting in the spring
44 fluid ounces
per acre
See the “ROUNDUP READY CROPS” section of this label for information
regarding the use of this product in Roundup Ready crops. See the “PRODUCT
INFORMATION” section of this label for information on Maximum Application
Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting
Roundup Ready winter canola.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied to winter varieties of Roundup
Ready canola from emergence to canopy closure in the fall and prior to bolting in
the spring. Application made during or after bolting could result in crop injury and
yield loss. To maximize yield potential, eliminate competing weeds early.
Some weeds with multiple germination times, or suppressed (stunted) weeds, or
weeds that have overwintered, might need a sequential application of this product
for control. Make the second application after some re-growth has occurred and a
minimum of 60 days after the initial application of this product.
Single Application – Apply 16 to 22 fluid ounces of this product per acre in the
fall when weeds are small and actively growing. Use a higher rate within this
range when weed densities are high, when weeds have overwintered or when
weeds become large and well established. Application of more than 16 fluid
ounces per acre prior to the 6-leaf stage could result in reduced crop growth
in the fall.  Avoid spray overlaps as this could result in temporary yellowing
and/or growth reduction.
Sequential Application – Apply 11 to 22 fluid ounces of this product per acre
to 2-leaf or larger canola in the fall, followed by a sequential application at the
same rate and at a minimum interval of 60 days, but before bolting in the spring.
Sequential application works best for control of early-emerging annual weeds and
winter-emerging weeds, such as downy brome, jointed goatgrass and ryegrass,
and for weeds that have overwintered.  This product will control or suppress most
perennial weeds. For some perennial weeds, a sequential application might be
needed to reduce competition with the crop.
RESTRICTIONS: No more than two over-the-top broadcast applications may
be made from crop emergence up to the onset of bolting and the total in-crop
application must not exceed 44 fluid ounces of this product per acre. Allow a
minimum of 60 days between application and harvest of canola grain.  No waiting
period is required between application and open grazing of livestock.
12.4 TruFlex Roundup Ready Canola
 (Spring Varieties)
TruFlex Roundup Ready spring canola is defined as those varieties of TruFlex
Roundup Ready canola that are seeded in the spring and harvested in the fall
and do not enter a period of winter dormancy.
The directions for use provided in this section are specific to and may
only be used with varieties designated as TruFlex Roundup Ready canola.
Applications described on this label made over the top of canola that is not
designated as TruFlex Roundup Ready canola could cause serious crop injury
and reduced yields. DO NOT combine these directions for use with those in
the “Roundup Ready Canola” section of this label or with any other directions
for use on canola on labeling for this or any other glyphosate-containing
product. Drift of this product from an application made to TruFlex Roundup
Ready canola onto adjacent fields of Roundup Ready canola could cause
extensive crop injury.
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence
(In-crop); Postemergence (In-crop) in Hybrid Seed Production Only
USE INSTRUCTIONS: Refer to the following table for the maximum application
rates of this product with spring varieties of TruFlex Roundup Ready canola.
Maximum Application Rates
Total for all Preplant, At-Planting,
Preemergence applications
3.3 quarts per acre
Total for all In-crop applications from
emergence through harvest
44 fluid ounces per acre
Total for all In-crop applications from
emergence through the 6-leaf stage
44 fluid ounces per acre
Total for all In-crop applications from the
6-leaf stage through first-flower
22 fluid ounces per acre
See the “ROUNDUP READY CROPS” section of this label for information
regarding the use of this product in Roundup Ready crops. See the “PRODUCT
INFORMATION” section of this label for more information on Maximum
Application Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: Up to 3.3 quarts of this product may be applied before,
during or after planting spring varieties of TruFlex Roundup Ready canola.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied postemergence (in-crop)
to spring varieties of TruFlex Roundup Ready canola from emergence through
the first-flower stage of development. To maximize yield potential, eliminate
competing weeds early.
For control of Canada thistle and morning glory, apply 44 fluid ounces of this
product per acre no later than the 6-leaf stage of canola development. For
control of wild buckwheat over 2 inches in size, make sequential applications
of 22 fluid ounces followed by 22 fluid ounces of this product per acre. For
control of other annual weeds, apply up to 44 fluid ounces of this product per
acre no later than the 6-leaf stage or up to 22 fluid ounces after the 6-leaf
stage through first-flower.
RESTRICTIONS: No more than two in-crop (over-the-top) broadcast applications
may be made from crop emergence through the first-flower stage of canola
development and the total in-crop application must not exceed 44 fluid
ounces of this product per acre. No more than 22 fluid ounces of this product
may be applied in-crop after the 6-leaf stage.
Postemergence (In-crop) in Hybrid Seed Production Only
THIS POSTEMERGENCE APPLICATION IS FOR USE ONLY IN HYBRID CANOLA
SEED PRODUCTION OF BOTH SPRING AND WINTER VARIETIES.  DO NOT MAKE
THIS APPLICATION ON CANOLA GROWN FOR FOOD OR FEED.
This product may be applied at a rate of between 11 and 22 fluid ounces per
acre from emergence until pollination is complete or near completion for the
control of non-Glyphosate-tolerant canola pollen parental line(s) in hybrid
canola seed production fields containing both Roundup Ready canola line(s)
and non-glyphosate-tolerant line(s). Sequential applications may be made for
the control of non-glyphosate-tolerant pollen parental lines up to a maximum
total application rate of 22 fluid ounces per acre.
RESTRICTIONS: Allow a minimum of 5 days between sequential applications.
Maximum total application rate of this product for ALL postemergence
(in-crop) applications in hybrid canola seed production fields, including
application for weed control and control of non-glyphosate-tolerant canola,
is 22 fluid ounces per acre.
12.5 Field Corn Hybrids with Roundup
 Ready 2 Technology
Field corn hybrids with Roundup Ready 2 Technology include Roundup
Ready Corn 2 and field corn seed products displaying the Roundup Ready
2 Technology logo.
The directions for use in this section apply only to use on FIELD CORN hybrids
with Roundup Ready 2 Technology. For directions for use on SWEET CORN
hybrids that contain Roundup Ready 2 Technology, see the “Sweet Corn
Hybrids with Roundup Ready 2 Technology” section of this label.
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence
(In-crop); Spot Treatment; Preharvest; Post-Harvest; Postemergence (In-crop)
for Tassel Control in Roundup Hybridization Systems Only
USE INSTRUCTIONS: Refer to the following table for maximum application
rates of this product with field corn hybrids with Roundup Ready 2 Technology.
Maximum Application Rates
Combined total per year for all applications 5.3 quarts per acre
Total for all Preplant, At-Planting,
Preemergence applications
3.3 quarts per acre
Maximum single In-crop application rate up
to 48-inch corn
32 fluid ounces per acre
Total for all In-crop applications from
emergence through 48-inch corn
64 fluid ounces per acre
Maximum Preharvest application rate after
maximum kernel fill is complete and the
crop is physiologically mature (black layer
formation) until 7 days before harvest*
22 fluid ounces per acre
*See RESTRICTIONS for Preharvest application.
See the “ROUNDUP READY CROPS” section of this label for information
regarding the use of this product in Roundup Ready crops. See the “PRODUCT
INFORMATION” section of this label for more information on Maximum
Application Rates.
PRECAUTIONS: The use of the in-crop (over-the-top) rates described in this
section on other than field corn hybrids with Roundup Ready 2 Technology
could cause crop injury and reduced yields.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied alone or in a tank mixture
before, during or after planting field corn hybrids with Roundup Ready
2 Technology.
TANK MIXTURES: This product may be tank-mixed with the following products.
Apply these tank mixtures in 10 to 20 gallons of water or 10 to 60 gallons
of nitrogen solution per acre. Ensure that the product used is labeled for
application prior to emergence of field corn. Read and follow label directions
for all products in the tank mixture.
2,4-D; acetochlor; atrazine; bicyclopyrone; carfentrazone-ethyl;
clopyralid; dicamba; diflufenzopyr; dimethenamid; dimethenamid-p;
flufenacet; flumetsulam; flumiclorac pentyl ester; isoxaflutole; linuron;
mesotrione; metolachlor; s-metolachlor; metribuzin; pendimethalin;
rimsulfuron; saflufenacil; simazine; thiencarbazone-methyl
AAtrex 4L; AAtrex Nine-O; Acuron; Acuron Flexi; Aim EC; Aim EW; Atrazine
4L; Atrazine 90 DF; Axiom DF; Balance Flexx; Banvel; Balance 480; Bicep
II MAGNUM; Bicep II MAGNUM FC; Bicep Lite II MAGNUM; Callisto; Cinch;
Cinch ATZ; Cinch ATZ Lite; Clarity; Corvus; Degree Xtra; Distinct; Dual
MAGNUM; Dual II MAGNUM; FulTime; FulTime NXT ; Guardsman MAX;
Harness; Harness Xtra; Harness Xtra 5.6L; Hornet WDG Broadleaf Blend;
Keystone; Keystone LA; Keystone LA NXT ; Keystone NXT ; Leadoff; Linex
4L; Lorox DF; Marksman; Me-Too-Lachlor II; Outlook; Prowl 3.3 EC;
Prowl H2O; Python WDG; Resicore; Resolve DF; Resolve Q; Resolve SG;
Resource; Shark EW; Shark H2O; Sharpen Powered by Kixor; Simazine
4L Flowable; Simazine 90DF; Simazine 90 WDG; Stalwart; Stalwart C;
Stalwart Xtra; Stinger; Surpass EC; Surpass NXT ; TopNotch; TripleFLEX II
15

RESTRICTIONS: Maximum quantity of this product that may be applied
for all preplant, at-planting and preemergence applications combined is
3.3 quarts per acre per season.  Application of 2,4-D or dicamba must be
made a minimum of 7 days prior to planting corn.
NOTE: For maximum weed control, make a postemergence (in-crop)
application of this product following application of a preemergence residual
product listed above.
Postemergence (In-crop)
USE INSTRUCTIONS:  This product may be applied alone or in a tank-mix over
the top of field corn hybrids with Roundup Ready 2 Technology from emergence
through the V8 stage (8 leaves with collars), or until corn plant height reaches
30 inches (freestanding), whichever comes first, unless otherwise directed.
Use drop nozzles for optimum spray coverage and weed control when corn
plant height is 24 to 30 inches. When corn plants are 30 to 48 inches tall
(freestanding), apply this product using only ground application equipment
fitted with drop nozzles aligned to avoid spraying into the whorls of the corn
plants. Maximum single in-crop application rate of this product up to 48-inch
field corn is 32 fluid ounces per acre.  Total in-crop application of this product
from corn plant emergence through 48 inches in height must not exceed
64 fluid ounces per acre.
When applied as directed, this product will control annual grasses and
broadleaf weeds listed on this label. Many perennial grasses and broadleaf
weeds will be controlled or suppressed with one or more applications of this
product. Make a postemergence application of 16 to 22 fluid ounces of this
product per acre before weeds exceed 4 inches in height (before they become
competitive with the crop). Repeat this application before new flushes of
weeds exceed 4 inches in height.
TANK MIXTURES: This product may be tank-mixed with the following products.
Ensure that the product used is labeled for application postemergence
(in-crop) to field corn. Read and follow label directions for all products in
the tank mixture.
2,4-D; acetochlor; atrazine; bicyclopyrone; carfentrazone-ethyl;
clopyralid; dicamba; diflufenzopyr; flumetsulam; flumiclorac pentyl
ester; foramsulfuron; halosulfuron-methyl; iodosulfuron-methyl-sodium;
isoxaflutole; mesotrione; nicosulfuron; rimsulfuron; tembotrione;
thiencarbazone-methyl; thifensulfuron methyl; topramezone
Acuron; Acuron Flexi; Aim EC; Aim EW; Banvel; Banvel 480; Basis;
Basis Blend; Callisto; Callisto Xtra; Capreno; Clarity; Corvus; Degree
Xtra; Distinct; Harness; Harness Xtra; Harness Xtra 5.6L; Hornet WDG
Broadleaf Blend; Impact; Laudis; Marksman; Resicore; Resolve DF;
Resolve C; Resolve SG; Resource; Shark EW; Shark H2O; Status;
TripleFLEX II; Warrant
RESTRICTIONS: Allow a minimum of 10 days between in-crop applications of
this product. Allow a minimum of 50 days between application of this product
and harvest of corn forage or grain.
Preharvest
USE INSTRUCTIONS: Up to 22 fluid ounces of this product per acre may be
applied for annual and perennial weed control prior to harvest when kernel fill
is complete and the corn is physiologically mature (black layer formed) and
grain moisture is 35 percent or less.
RESTRICTIONS: A preharvest application may be made only if the combined
total of previously applied over-the-top or drop nozzle applications does not
exceed 44 fluid ounces of this product per acre. Allow a minimum of 7 days
between application and harvest or feeding of corn stover or grain.
Post-Harvest
USE INSTRUCTIONS: This product may be applied for weed control after
crop harvest. Higher rates might be needed for control of large weeds that
were growing in the field at the time of harvest. Tank mixtures with 2,4-D
or dicamba may be used. Ensure that the product used is labeled for
post-harvest application in field corn. Read and follow label directions for all
products in the tank mixture.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest
or the feeding of vegetation within the application area. Application must be
made a minimum of 30 days prior to the planting of any crop not listed on
this label.
Postemergence (In-crop) for Tassel Control in Roundup Hybridization
Systems Only
THIS APPLICATION IS FOR USE ONLY IN SEED PRODUCTION OF CORN
HYBRIDS USING THE ROUNDUP HYBRIDIZATION SYSTEM (RHS). DO NOT MAKE
THIS APPLICATION ON CORN GROWN FOR FOOD OR FEED.
The RHS designation indicates that the corn contains Bayer CropScience LP
proprietary gene technology that allows for tassel-only susceptibility to this
product. Use of this product on corn hybrids or inbreds that are not designated
as RHS or as corn containing Roundup Ready 2 Technology could result in
severe crop injury and yield loss.
USE INSTRUCTIONS: This product may be applied at rates of between 11 and
32 fluid ounces per acre as an over-the-top broadcast application for tassel
control in RHS-based seed corn production fields from the V8 stage until either
the V13 stage or 100 GDU (Growing Degree Units) before flowering.
RESTRICTIONS:  Make no more than two applications of this product for tassel
control.  The maximum total application rate of this product for tassel control
is 64 fluid ounces.  The maximum combined total amount of this product
that may be applied per year for both weed control and tassel control is
5.3 quarts per acre.
12.6 Sweet Corn Hybrids with Roundup
 Ready 2 Technology
Sweet corn hybrids with Roundup Ready 2 Technology include Roundup Ready
Sweet Corn and sweet corn seed products displaying the Roundup Ready
2 Technology logo.
The directions for use in this section apply only to use on SWEET CORN hybrids
with Roundup Ready 2 Technology. For directions for use on FIELD CORN hybrids
that contain Roundup Ready 2 Technology, see the “Field Corn Hybrids with
Roundup Ready 2 Technology” section of this label.
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence
(In-crop)
USE INSTRUCTIONS: Refer to the following table for maximum application rates
of this product with sweet corn hybrids with Roundup Ready 2 Technology.
Maximum Application Rates
Combined total per year for all applications 5.3 quarts per acre
Total for all Preplant, At-Planting, Preemergence
applications
3.3 quarts per acre
Maximum single In-crop application rate up to
48-inch sweet corn
44 fluid ounces
per acre
Total for all In-crop applications from emergence
through 48-inch sweet corn
4.1 quarts per acre
See the “ROUNDUP READY CROPS” section of this label for information
regarding the use of this product in Roundup Ready crops. See the “PRODUCT
INFORMATION” section of this label for more information on Maximum
Application Rates.
PRECAUTIONS: The use of the in-crop (over-the-top) applications described in
this section on other than sweet corn hybrids with Roundup Ready 2 Technology
could cause crop injury and reduced yields.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied alone or in a tank mixture
before, during or after planting sweet corn hybrids with Roundup Ready 2
Technology.
TANK MIXTURES: This product may be tank-mixed with the residual herbicide
products listed below for maximum weed control. Ensure that the product used
is labeled for application prior to emergence of sweet corn. Read and follow
label directions for all products in the tank mixture. Apply these tank mixtures
in 10 to 20 gallons of water or in 10 to 60 gallons of nitrogen solution per acre.
acetochlor; atrazine; carfentrazone-ethyl;  dimethenamid-p; metolachlor;
s-metolachlor
AAtrex 4L; AAtrex Nine-O; Aim EC; Aim EW; Atrazine 4L; Atrazine 90 DF;
Bicep II MAGNUM; Bicep II MAGNUM FC; Bicep Lite II MAGNUM; Cinch; Cinch
ATZ; Degree Xtra; Dual MAGNUM; Dual II Magnum; FulTime; Guardsman
MAX; Harness; Harness Xtra; Harness Xtra 5.6L; Keystone; Keystone LA;
Keystone LA NXT ; Keystone NXT ; Me-Too-Lachlor II; Outlook; TopNotch
RESTRICTIONS: Maximum quantity of this product that may be applied for all
preplant, at-planting and preemergence applications combined is 3.3 quarts
per acre per season.
Postemergence (In-crop)
USE INSTRUCTIONS: Apply this product alone or in a tank mixture over the
top of sweet corn hybrids with Roundup Ready 2 Technology from emergence
through the V8 stage (8 leaves with collars), or until sweet corn plant height
reaches 30 inches (freestanding), whichever comes first. Use drop nozzles for
optimum spray coverage and weed control when sweet corn plant height is
24 to 30 inches. When sweet corn plants are 30 to 48 inches tall
(freestanding), apply this product using only ground application equipment
fitted with drop nozzles aligned to avoid spraying into the whorls of the sweet
corn plants. Avoid spraying if the crop has reached the reproductive stage.
Maximum single in-crop application rate of this product up to 48-inch sweet
corn is 44 fluid ounces per acre. Total in-crop application of this product from
emergence through 48 inches in height must not exceed 4.1 quarts (132 fluid
ounces) per acre per growing season.
When applied as directed, this product will control annual grasses and
broadleaf weeds listed on this label. Many perennial grasses and broadleaf
weeds will be controlled or suppressed with one or more applications of this
product. Apply 16 to 22 fluid ounces of this product per acre before weeds
exceed 4 inches in height or before they become competitive with the crop. If
new flushes of weeds occur, a sequential application of 16 to 22 fluid ounces
per acre may be made before weeds exceed 4 inches in height.
TANK MIXTURES: This product may be tank-mixed with the following products.
Ensure that the product used is labeled for application postemergence
(in-crop) to sweet corn. Read and follow label directions for all products in
the tank mixture.
atrazine; carfentrazone-ethyl; foramsulfuron; tembotrione; topramezone
AAtrex 4L; AAtrex Nine-O; Aim EC; Aim EW; Atrazine 4L; Atrazine 90 DF;
Callisto; Callisto Xtra; Impact; Laudis
RESTRICTIONS: Allow a minimum of 10 days between in-crop applications
of this product. Do not apply atrazine in a tank-mix with this product when
sweet corn plants are greater than 12 inches tall.  Allow a minimum of 30 days
between application of this product and harvest of sweet corn forage or grain.
12.7 Roundup Ready Cotton
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence
(In-crop); Selective Equipment (In-crop); Preharvest
USE INSTRUCTIONS: Refer to the following table for maximum application
rates of this product with Roundup Ready cotton.
Maximum Application Rates
Combined total per year for all applications 5.3 quarts per acre
Total for all Preplant, At-Planting,
Preemergence applications
3.3 quarts per acre
Total for all In-crop applications from
cracking to layby
2.5 quarts per acre
Maximum Preharvest application rate 44 fluid ounces per acre
Combined total for all In-crop applications
from emergence through harvest
4 quarts per acre
See the “ROUNDUP READY CROPS” section of this label for information
regarding the use of this product in Roundup Ready crops. See the “PRODUCT
INFORMATION” section of this label for more information on Maximum
Application Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting
Roundup Ready cotton.
TANK MIXTURES: This product may be tank-mixed with 2,4-D or Clarity and
applied prior to planting only. This product may be tank-mixed with the following
products and applied prior to crop emergence. Ensure that the product used is
labeled for application prior to the emergence of cotton. Read and follow label
directions for all products in the tank mixture.
16

acetochlor; clomazone; diuron; flumioxazin; fluometuron; fomesafen;
metolachlor; s-metolachlor; norflurazon; pendimethalin; prometyrn;
pyrithiobac-sodium; saflufenacil
Caparol 4L; Command 3ME; Cotoran 4L; Cotton Pro; Dawn; Direx 4L;
Dual MAGNUM; Dual II MAGNUM; Karmex DF; Prowl 3.3 EC; Prowl H2O;
Reflex; Rowel; Sharpen Powered by Kixor; Stalwart; Staple LX; Valor SX;
Warrant; Warrant Ultra
RESTRICTIONS: Maximum quantity of this product that may be applied for all
preplant, at-planting and preemergence applications combined is 3.3 quarts
per acre per season.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied over the top of Roundup
Ready cotton (in-crop) at rates of up to 22 fluid ounces per acre per
application from cracking until the 4-leaf (node) stage of development
(until the fifth true leaf reaches the size of a quarter). NO MORE THAN TWO
OVER-THE-TOP BROADCAST APPLICATIONS MAY BE MADE FROM CROP
EMERGENCE THROUGH THE 4-LEAF (NODE) STAGE OF DEVELOPMENT.
SEQUENTIAL OVER-THE-TOP OR POST-DIRECTED APPLICATIONS OF THIS
PRODUCT IN-CROP MUST BE A MINIMUM OF 10 DAYS APART AND COTTON
MUST HAVE AT LEAST TWO NODES OF INCREMENTAL GROWTH BETWEEN
APPLICATIONS. Over-the-top application made after the 4-leaf (node) stage
of development could result in boll loss, delayed maturity and/or yield loss.
TANK MIXTURES: This product may be tank-mixed with the following products
and applied over the top of Roundup Ready cotton up to the 4-leaf stage.
Ensure that the product used is labeled for application postemergence (in-crop)
to cotton. Read and follow label directions for all products in the tank mixture.
acetochlor; clethodim; fluazifop-P-butyl; fomesafen; metolachlor;
s-metolachlor; monosodium acid methanearsonate; pyrithiobac-sodium;
quizalofop-P-ethyl, sethoxydim; trifloxysulfuron-sodium
Assure II; Dual MAGNUM; Dual II MAGNUM; Envoke; Fusilade DX; MSMA
6 Plus; MSMA 6.6; Poast; Poast Plus; Reflex; Select; Select 2 EC; Select
Max Herbicide with Inside Technology; Stalwart; Staple LX; Warrant;
Warrant Ultra
Staple LX could cause leaf yellowing and/or leaf crinkling when applied
postemergence (in-crop) to Roundup Ready cotton.
Dual MAGNUM, Dual II MAGNUM and Stalwart applied over the top of
Roundup Ready cotton could cause leaf injury in the form of necrotic
spotting.
Salvage Treatment – may be made after the 4-leaf stage of development
and only when weeds threaten to cause the loss of the crop. Apply 22 fluid
ounces of this product per acre either as an over-the-top application or as a
post-directed application sprayed higher on the cotton plants and onto the
weeds.
IN THE STATE OF ARIZONA ONLY , up to 32 fluid ounces of this product may
be applied per acre either as an over-the-top application or a post-directed
application for salvage treatment.
NOTE: SALVAGE TREATMENT WILL RESULT IN SIGNIFICANT BOLL LOSS,
DELAYED MATURITY AND/OR YIELD LOSS. NO MORE THAN ONE SALVAGE
TREATMENT MAY BE MADE PER GROWING SEASON.
RESTRICTIONS: Maximum quantity of this product that may be applied for all
in-crop applications from cracking to layby combined is 2.5 quarts per acre
per season. Allow a minimum of 7 days between application and harvest of
cotton. DO NOT ADD ADDITIONAL SURFACTANT OR ADDITIVES CONTAINING
SURFACTANT TO THIS PRODUCT (OTHER THAN THOSE CONTAINED IN ANY
TANK-MIX PRODUCT) FOR OVER-THE-TOP APPLICATION TO ROUNDUP READY
COTTON.
Selective Equipment (In-crop)
USE INSTRUCTIONS: This product may be applied using precision
post-directed or hooded sprayers at rates of up to 22 fluid ounces per acre
per application to Roundup Ready cotton through layby. At this crop stage,
use post-directed application equipment to direct the spray towards the base
of the cotton plants, avoiding contact of the herbicide spray with the leaves
of the plant. To minimize contact, maintain a low spray pressure (less than
30 pounds per square inch) and place nozzles in a low position directing a
horizontal spray pattern under the leaves of the cotton plant and onto the
weeds in the row. For enhanced results, apply this product while weeds are
small (less than 3 inches in height). See additional use instructions in the
“APPLICATION EQUIPMENT AND TECHNIQUES” section of this label.
TANK MIXTURES: This product may be tank-mixed with the following products
for in-crop application using precision post-directed or hooded sprayers.
Ensure that the product used is labeled for application postemergence
(in-crop) to cotton. Read and follow label directions for all products in the
tank mixture.
acetcohlor; carfentrazone-ethyl; diuron; flumioxazin; fluometuron;
fomesafen; linuron; metolachlor; monosodium acid methanearsonate;
pendimethalin; prometyrn; pyrithiobac-sodium; trifloxysulfuron-sodium
Aim EC; Aim EW; Caparol 4L; Cotoran 4L; Direx 4L; Envoke; Layby-Pro;
MSMA 6 Plus; MSMA 6.6; Prowl 3.3 EC; Prowl H2O; Rowel; Staple LX;
Valor SX, Warrant; Warrant Ultra
Staple LX could cause leaf yellowing and/or leaf crinkling when applied
postemergence (in-crop) to Roundup Ready cotton.
RESTRICTIONS: Maximum quantity of this product that may be applied
for all in-crop applications from cracking to layby combined is 2.5 quarts
per acre per season. Allow a minimum of 7 days between application and
harvest of cotton. NO MORE THAN TWO APPLICATIONS OF THIS PRODUCT
MAY BE MADE FROM THE 5-LEAF STAGE THROUGH LAYBY . SEQUENTIAL
OVER-THE-TOP OR POST-DIRECTED IN-CROP APPLICATIONS OF THIS
PRODUCT MUST BE A MINIMUM OF 10 DAYS APART AND COTTON MUST HAVE
AT LEAST TWO NODES OF INCREMENTAL GROWTH BETWEEN APPLICATIONS.
Preharvest
USE INSTRUCTIONS:  Up to 44 fluid ounces of this product per acre may be
applied for annual and perennial weed control prior to crop harvest after 20
percent boll crack.
NOTE: This product will not enhance the performance of harvest aids when
applied to Roundup Ready cotton.
PRECAUTIONS: Do not apply this product for preharvest weed control to cotton
grown for seed, as a reduction in germination or vigor could occur. Buyer and
all users are responsible for any and all loss or damage in connection with
the preharvest use of this product on Roundup Ready cotton grown for seed.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest
of cotton. DO NOT ADD ADDITIONAL SURFACTANT OR ADDITIVES CONTAINING
SURFACTANT TO THIS PRODUCT FOR PREHARVEST APPLICATION TO
ROUNDUP READY COTTON.
ATTENTION:  USE OF THIS PRODUCT IN ACCORDANCE WITH LABEL
DIRECTIONS IS EXPECTED TO RESULT IN NORMAL GROWTH OF ROUNDUP
READY COTTON. HOWEVER, DUE TO THE SENSITIVITY OF COTTON FRUITING
TO VARIOUS ENVIRONMENTAL CONDITIONS, AGRONOMIC PRACTICES AND
OTHER FACTORS, IT IS IMPOSSIBLE TO ELIMINATE ALL RISKS ASSOCIATED
WITH THIS PRODUCT, EVEN WHEN APPLICATIONS ARE MADE IN ACCORDANCE
WITH THE LABEL DIRECTIONS. IN SOME CASES, THESE FACTORS CAN RESULT
IN BOLL LOSS, DELAYED MATURITY AND/OR YIELD LOSS.
12.8 Roundup Ready Flex Cotton
The directions for use of this product provided in this section are
specific to and may only be used with varieties designated as Roundup
Ready Flex cotton. Applications described in this section made over the top
of cotton other than Roundup Ready Flex cotton will cause crop injury and
reduced yields. DO NOT combine the directions for use in this section with
those in the “Roundup Ready Cotton” section of this label, or with any other
directions for use on Roundup Ready cotton or Roundup Ready Flex cotton
on labeling for this or any other glyphosate-containing product. Drift of this
product from an application made to Roundup Ready Flex cotton onto adjacent
fields of post 4-leaf (node) Roundup Ready cotton could cause extensive crop
injury, including boll loss, delayed maturity and/or yield loss.
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence
(In-crop); Preharvest
USE INSTRUCTIONS: Refer to the following table for maximum application
rates of this product with Roundup Ready Flex cotton.
Maximum Application Rates
Combined total per year for all applications 5.3 quarts per acre
Total for all Preplant, At-Planting,
Preemergence applications
3.3 quarts per acre
Total for all In-crop applications from
cracking to 60 percent open bolls
4.0 quarts per acre
Total for all In-crop applications between
layby and 60 percent open bolls
44 fluid ounces per acre
Total for all in-crop applications from 60
percent open bolls to 7 days prior to harvest
44 fluid ounces per acre
Total for all In-crop applications from
emergence through harvest
4 quarts per acre
See the “ROUNDUP READY CROPS” section of this label for information
regarding the use of this product in Roundup Ready crops. See the “PRODUCT
INFORMATION” section of this label for more information on Maximum
Application Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS:  This product may be applied before, during or after
planting Roundup Ready Flex cotton.
TANK MIXTURES: This product may be tank-mixed with 2,4-D or Clarity
and applied prior to planting only. This product may be tank-mixed with
the following products and applied prior to crop emergence. Ensure that the
product used is labeled for application prior to emergence of cotton. Read and
follow label directions for all products in the tank mixture.
acetochlor; clomazone; diuron; flumioxan; fluometuron; fomesafen;
metolachlor; s-metolachlor; norflurozon; pendimethalin; prometyrn;
pyrithiobac-sodium; saflufenacil
Caparol 4L; Command 3ME; Cotoran 4L; Cotton Pro; Dawn 4L; Direx; Dual
MAGNUM; Dual II MAGNUM; Karmex DF; Prowl 3.3 EC; Prowl H2O; Reflex;
Rowel; Sharpen Powered by Kixor; Stalwart; Staple LX; Valor SX; Warrant;
Warrant Ultra
RESTRICTIONS: Maximum quantity of this product that may be applied for all
preplant, at-planting and preemergence applications combined is 3.3 quarts
per acre per season.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied to control annual grasses
and broadleaf weeds listed on this label in Roundup Ready Flex cotton. To
maximize yield potential, eliminate competing weeds early. Many perennial weeds
will be controlled or suppressed with one or more applications of this product.
Use an initial application rate of 22 fluid ounces per acre to control or suppress
1 to 3 inch tall annual grasses and broadleaf weeds. This product may be applied
postemergence to Roundup Ready Flex cotton using ground application equipment
at rates up to 32 fluid ounces per acre per application. In addition to broadcast
application, post-directed spray equipment may be used to achieve more thorough
weed coverage.
IN THE STATES OF ARIZONA, NEW MEXICO AND TEXAS (WEST OF I-35)
ONLY , up to 44 fluid ounces of this product per acre may be applied per
postemergence application using ground application equipment.
TANK MIXTURES: This product may be tank-mixed with the following products
and applied postemergence (in-crop) over the top of Roundup Ready Flex
cotton.
acetochlor; clethodim; fluazifop-P-butyl; fomesafen; metolachlor;
s-metolachlor; monosodium acid methanearsonate; pyrithiobac-sodium;
quizalofop-p-ethyl; sethoxydim; trifloxysulfuron-sodium
Assure II; Dual MAGNUM; Dual II MAGNUM; Envoke; Fusilade DX; MSMA
6 Plus; MSMA 6.6; Poast; Poast Plus; Reflex; Select; Select 2 EC; Select
Max Herbicide with Inside Technology; Stalwart; Staple LX; Warrant;
Warrant Ultra
Staple LX could cause leaf yellowing and/or leaf crinkling when applied
postemergence (in-crop) in Roundup Ready Flex cotton.
Dual MAGNUM, Dual II MAGNUM and Stalwart applied over the top of
Roundup Ready Flex cotton could cause leaf injury in the form of necrotic
spotting.
This product may be tank-mixed with the following products for in-crop
application using precision post-directed or hooded sprayers.
17

acetochlor; carfentrazone-ethyl; diuron; flumioxazin; fluometuron;
fomesafen; linuron; metolachlor; monosodium acid methanearsonate;
pendimethalin; prometyrn; pyrithiobac-sodium; trifloxysulfuron-sodium
Aim EC; Aim EW; Caparol 4L; Cotoran 4L; Direx 4L; Envoke; Layby-Pro;
MSMA 6 Plus; MSMA 6.6; Prowl 3.3 EC; Prowl H2O; Rowel; Staple LX;
Valor SX; Warrant; Warrant Ultra
Staple LX could cause leaf yellowing and/or leaf crinkling when applied
postemergence (in-crop) in Roundup Ready Flex cotton.
Ensure that the product used is labeled for application postemergence
(in-crop) to cotton. Read and follow label directions for all products in the
tank mixture.
RESTRICTIONS: The maximum single, in-crop application rate of this product
to Roundup Ready Flex cotton using ground application equipment is 32 fluid
ounces per acre, except in Arizona, New Mexico and west Texas (west of
I-35 only), where up to 44 fluid ounces per acre may be applied in a single
application using ground application equipment. In-crop application
rates above 22 fluid ounces per acre made alone or with the addition
of other crop chemical products containing surfactant could cause a
crop response including leaf speckling or leaf necrosis. Do not exceed a
maximum single, in-crop application rate of 22 fluid ounces of this product
per acre when using aerial application equipment, except in Arizona, New
Mexico and west Texas (west of I-35 only), where up to 32 fluid ounces may
be applied as a single application using aerial application equipment. Between
layby and 60 percent open bolls, the maximum combined total application
rate of this product is 44 fluid ounces per acre. The combined total for all
applications of this product made from crop emergence to 60 percent open
bolls must not exceed 4.0 quarts per acre.
DO NOT ADD ADDITIONAL SURFACTANT OR ADDITIVES CONTAINING
SURFACTANT TO THIS PRODUCT FOR OVER-THE-TOP APPLICATION TO
ROUNDUP READY FLEX COTTON.
Preharvest
USE INSTRUCTIONS:  Up to 44 fluid ounces of this product per acre may be
applied to Roundup Ready Flex cotton for annual and perennial weed control
prior to harvest after 60 percent boll crack.
NOTE: This product will not enhance the performance of harvest aids when
applied to Roundup Ready Flex cotton.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest
of Roundup Ready Flex cotton. DO NOT ADD ADDITIONAL SURFACTANT OR
ADDITIVES CONTAINING SURFACTANT TO THIS PRODUCT FOR PREHARVEST
APPLICATION TO ROUNDUP READY FLEX COTTON.
ATTENTION: USE OF THIS PRODUCT IN ACCORDANCE WITH LABEL DIRECTIONS
IS EXPECTED TO RESULT IN NORMAL GROWTH OF ROUNDUP READY FLEX
COTTON. HOWEVER, DUE TO THE SENSITIVITY OF COTTON FRUITING TO VARIOUS
ENVIRONMENTAL CONDITIONS, AGRONOMIC PRACTICES AND OTHER FACTORS,
IT IS IMPOSSIBLE TO ELIMINATE ALL RISKS ASSOCIATED WITH THIS PRODUCT,
EVEN WHEN APPLICATIONS ARE MADE IN ACCORDANCE WITH THE LABEL
DIRECTIONS. IN SOME CASES, THESE FACTORS CAN RESULT IN BOLL LOSS,
DELAYED MATURITY AND/OR YIELD LOSS.
12.9 Roundup Ready Soybean
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence
(In-crop); Preharvest; Post-Harvest
USE INSTRUCTIONS: Refer to the following table for maximum application
rates of this product with Roundup Ready soybean.
Maximum Application Rates
Combined total per year for all applications 5.3 quarts per acre
Total for all Preplant, At-Planting,
Preemergence applications
3.3 quarts per acre
Total for all In-crop applications from
cracking through flowering (R2 stage
soybean)
64 fluid ounces per acre
Maximum Preharvest application rate 22 fluid ounces per acre
See the “ROUNDUP READY CROPS” section of this label for information
regarding the use of this product in Roundup Ready crops. See the “PRODUCT
INFORMATION” section of this label for more information on Maximum
Application Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after
planting Roundup Ready soybean.
TANK MIXTURES: This product may be tank-mixed with 2,4-D, Banvel or
Clarity and applied prior to planting only.  This product may be tank-mixed
with the following products and applied prior to crop emergence.  Ensure that
the product used is labeled for application prior to emergence of soybean.
Read and follow label directions for all products in the tank mixture.
acetochlor; carfentrazone-ethyl; chlorimuron ethyl; clethodim; clomazone;
cloransulam-methyl; dimethenamid; dimethenamid-p; fenoxaprop-p-ethyl;
fluazifop-p-butyl; flufenacet; flumetsulam; flumiclorac pentyl ester;
flumioxazin; fomesafen; fluthiacet-methyl; imazaquin; imazethapyr;
lactofen; linuron; metolachlor; s-metolachlor; metribuzin; pendimethalin;
pyroxasulfone; quizalofop-P-ethyl; saflufenacil; sulfentrazone; tribenuron
methyl; trifluralin
Aim EC; Aim EW; Assure II; Authority Assist; Authority Elite; Authority
First DF; Authority MAXX; Authority MTZ DF; Authority XL; Axiom DF;
Blanket 4F; Boundary 6.5 EC; Cadet; Canopy; Canopy Blend; Canopy EX;
Classic; Cobra; Command 3ME; Dawn; Dual MAGNUM; Dual II MAGNUM;
Fierce; Fierce XLT ; FirstRate; Flexstar; Fusion; Linex 4L; Lorox DF; Me-Too-
Lachlor; Optill Powered by Kixor; Outlook; Phoenix; Prowl 3.3EC; Prowl
H2O; Pursuit; Python WDG; Reflex; Resource; Rhythm; Rowel; Rowel FX;
Select; Select 2 EC; Select Max Herbicide with Inside Technology; Sharpen
Powered by Kixor; Spartan 4F; Treflan 4L; Treflan 4 EC; TriCor 4F; TriCor DF;
Valor SX; Valor XLT ; Warrant; Warrant Ultra; Zidua
RESTRICTIONS:  Maximum quantity of this product that may be applied for all
preplant, at-planting and preemergence applications combined is 3.3 quarts
per acre per season.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be used to control annual grasses
and broadleaf weeds in Roundup Ready soybean from emergence (cracking)
through flowering (R2 stage soybean).  R2 stage soybean ends when a pod
5 millimeters (3/16 inch) long appears at one of the four uppermost nodes on
the main stem with a fully developed leaf (R3 stage). Refer to the “ANNUAL
WEEDS RATE SECTION” of this label for application rates for specific annual
weeds. An initial application of 22 fluid ounces of this product per acre will
control or suppress most 2- to 8-inch tall weeds, which are normally found
approximately 2 to 5 weeks after planting. If the initial application is delayed
and weeds are larger, apply a higher rate of this product. This product may
be applied up to 44 fluid ounces per acre as a single, in-crop application for
control of annual weeds and where dense weed populations exist.
Application of 22 to 44 fluid ounces of this product per acre (single or
multiple applications) will control or suppress perennial weeds, including
bermudagrass, Canada thistle, common milkweed, field bindweed, hemp
dogbane, horsenettle, marestail (horseweed), nutsedge, quackgrass, rhizome
johnsongrass, redvine, trumpetcreeper, swamp smartweed and wirestem
muhly. For enhanced results, allow perennial weed species to achieve at
least 6 inches of growth before applying this product.
Under adverse growing conditions, including drought, hail or wind damage,
or a poor soybean stand that slows or delays canopy closure, a sequential
application of this product might be necessary to control late flushes of weeds.
IN THE SOUTHERN STATES, A SEQUENTIAL APPLICATION OF THIS PRODUCT
WILL BE NEEDED TO CONTROL NEW FLUSHES OF WEEDS IN THE ROUNDUP
READY SOYBEAN CROP . To control giant ragweed, apply 22 fluid ounces of this
product per acre when the weed is 8 to 12 inches tall to increase control and
possibly avoid the need for a sequential application.
TANK MIXTURES: This product may be tank-mixed with the following products
and applied postemergence (in-crop) over the top of Roundup Ready soybean.
Ensure that the product used is labeled for application postemergence (in-crop)
to soybean.  Read and follow label directions for all products in the tank mixture.
acetochlor; acifluorfen; bentazon; chlorimuron ethyl; clethodim;
cloransulam-methyl; fenoxaprop-P-ethyl; fluazifop-p-butyl; flumiclorac
pentyl ester; fluthiacet-methyl; fomesafen; imazamox; imazethapyr; lactofen;
pendimethalin; quizalofop P-ethyl; sethoxydim; thifensulfuron-methyl
Arrow 2EC; Assure II; Basagran; Basagran 5L; Cadet; Classic; Cobra; Dawn;
Extreme; FirstRate; Flexstar; Fusilade DX; Fusion; Harmony SG; Phoenix; Poast;
Poast Plus; Pursuit; Raptor; Reflex; Resource; Rhythm; Select; Select 2 EC;
Select Max Herbicide with Inside Technology; Synchrony XP; Targa; Ultra Blazer;
Warrant; Warrant Ultra
PRECAUTIONS: In some cases, these tank-mix products will cause visual
soybean injury.
RESTRICTIONS: The combined total application of this product from crop
emergence through harvest must not exceed 64 fluid ounces per acre. The
maximum rate for any single in-crop application is 44 fluid ounces per acre.
The maximum combined total amount of this product that may be applied
during flowering (R2 stage soybean) is 44 fluid ounces per acre.
Preharvest
USE INSTRUCTIONS: Apply up to 22 fluid ounces of this product per acre to
Roundup Ready soybean for weed control prior to harvest after pods have set
and lost all green color. Take care to avoid excessive seed shatter loss due to
ground application equipment.
RESTRICTIONS: Allow a minimum of 14 days between application and harvest
of soybean grain or feeding of soybean grain, forage or hay.
Post-Harvest
USE INSTRUCTIONS: This product may be applied for weed control after
harvest of Roundup Ready soybean. Higher rates might be needed for control
of large weeds that were growing in the field at the time of harvest. Tank
mixtures with 2,4-D or dicamba may be used.  Ensure that the product used is
labeled for weed control application after harvest of soybean. Read and follow
label directions for all products in the tank mixture.
RESTRICTIONS: Application must be made a minimum of 30 days prior to the
planting of any crop not listed on this label.
12.10 Roundup Ready 2 Yield Soybean
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence
(In-crop); Preharvest; Post-Harvest
USE INSTRUCTIONS: Refer to the following table for maximum application
rates of this product with Roundup Ready 2 Yield soybean.
Maximum Application Rates
Combined total per year for all applications 5.3 quarts per acre
Total for all Preplant, At-Planting,
Preemergence applications 3.3 quarts per acre
Total for all In-crop applications from cracking
through flowering (R2 stage soybean) 64 fluid ounces per acre
Maximum Preharvest application rate 22 fluid ounces per acre
See the “ROUNDUP READY CROPS” section of this label for information regarding
the use of this product in Roundup Ready crops. See the “PRODUCT INFORMATION”
section of this label for more information on Maximum Application Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting
Roundup Ready 2 Yield soybean.
TANK MIXTURES: This product may be tank-mixed with 2,4-D, Banvel or Clarity and
applied prior to planting only. This product may be tank-mixed with the following
products and applied prior to crop emergence. Ensure that the product used is
labeled for application prior to emergence of soybean. Read and follow label
directions for all products in the tank mixture.
acetochlor; carfentrazone-ethyl; chlorimuron ethyl; clethodim; clomazone;
cloransulam-methyl; dimethenamid; dimethenamid-p; fenoxaprop-p-
ethyl; fluazifop-p-butyl; flufenacet; flumetsulam; flumiclorac pentyl ester;
flumioxazin; fluthiacet-methyl; fomesafen; imazaquin; imazethapyr;
lactofen; linuron; metolachlor; s-metolachlor; metribuzin; pendimethalin;
pyroxasulfone; quizalofop-P-ethyl; saflufenacil; sulfentrazone; tribenuron
methyl; trifluralin
18

Aim EC; Aim EW; Assure II; Authority Assist; Authority Elite; Authority
First DF; Authority MAXX; Authority MTZ DF; Authority XL; Axiom DF;
Blanket 4F; Boundary 6.5 EC; Cadet; Canopy; Canopy Blend; Canopy EX;
Classic; Cobra; Command 3ME; Dawn; Dual MAGNUM; Dual II MAGNUM;
Fierce; Fierce XLT ; FirstRate; Flexstar; Fusion; Linex 4L; Lorox DF;
Me-Too-Lachlor; Optill Powered by Kixor; Outlook; Phoenix; Prowl 3.3 EC;
Prowl H2O; Pursuit; Python WDG; Reflex; Resource; Rhythm; Rowel; Rowel
FX; Select; Select 2 EC; Select Max Herbicide with Inside Technology;
Sharpen Powered by Kixor; Spartan 4F; Treflan 4L; Treflan 4 EC; TriCor 4F;
TriCor DF; Valor SX; Valor XLT ; Warrant; Warrant Ultra; Zidua
RESTRICTIONS: Maximum quantity of this product that may be applied for all
preplant, at-planting and preemergence applications combined is 3.3 quarts
per acre per season.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be used to control annual grasses
and broadleaf weeds in Roundup Ready 2 Yield soybean from emergence
(cracking) through flowering (R2 stage soybean). R2 stage soybean ends
when a pod 5 millimeters (3/16 inch) long appears at one of the four
uppermost nodes on the main stem with a fully developed leaf (R3 stage).
Refer to the “ANNUAL WEEDS RATE SECTION” of this label for application
rates for specific annual weeds. An initial application of 22 fluid ounces of
this product per acre will control or suppress most 2- to 8-inch tall weeds,
which are normally found approximately 2 to 5 weeks after planting. If the
initial application is delayed and weeds are larger, apply a higher rate of this
product. This product may be applied up to 44 fluid ounces per acre as a
single, in-crop application for control of annual weeds and where dense weed
populations exist.
Application of 22 to 44 fluid ounce of this product per acre (single or
multiple applications) will control or suppress perennial weeds, including
bermudagrass, Canada thistle, common milkweed, field bindweed, hemp
dogbane, horsenettle, marestail (horseweed), nutsedge, quackgrass, rhizome
johnsongrass, redvine, trumpetcreeper, swamp smartweed and wirestem
muhly. For enhanced results, allow perennial weed species to achieve at
least 6 inches of growth before applying this product.
Under adverse growing conditions, including drought, hail or wind damage,
or a poor soybean stand that slows or delays canopy closure, a sequential
application of this product might be necessary to control late flushes of
weeds. IN THE SOUTHERN STATES, A SEQUENTIAL APPLICATION OF THIS
PRODUCT WILL BE NEEDED TO CONTROL NEW FLUSHES OF WEEDS IN THE
ROUNDUP READY 2 YIELD SOYBEAN CROP . To control giant ragweed, apply
22 fluid ounces of this product per acre when the weed is 8 to 12 inches tall
to increase control and possibly avoid the need for a sequential application.
TANK MIXTURES: This product may be tank-mixed with the following products
and applied postemergence (in-crop) over the top of Roundup Ready 2 Yield
soybean. Ensure that the product used is labeled for application postemergence
(in-crop) to soybean. Read and follow label directions for all products in the
tank mixture.
acetochlor; acifluorfen; bentazon; chlorimuron ethyl; clethodim;
cloransulam-methyl; fenoxaprop-p-ethyl; fluazifop-p-butyl; flumiclorac
pentyl ester; fluthiacet-methyl; fomesafen; imazamox; imazethapyr;
lactofen; pendimethalin; quizalofop P-ethyl; sethoxydim; thifensulfuron-methyl
Arrow 2EC; Assure II; Basagran; Basagran 5L; Cadet; Classic; Cobra;
Dawn; Extreme; FirstRate; Flexstar; Fusilade DX; Fusion; Harmony SG;
Phoenix; Poast; Poast Plus; Pursuit; Raptor; Reflex; Resource; Rhythm;
Select; Select 2 EC; Select Max Herbicide with Inside Technology;
Synchrony XP; Targa; Ultra Blazer; Warrant; Warrant Ultra
PRECAUTIONS: In some cases, these tank-mix products will cause visual
soybean injury.
RESTRICTIONS: The combined total application of this product from crop
emergence through harvest must not exceed 64 fluid ounces per acre. The
maximum rate for any single in-crop application is 44 fluid ounces per acre.
The maximum combined total amount of this product that may be applied
during flowering (R2 stage soybean) is 44 fluid ounces per acre.
Preharvest
USE INSTRUCTIONS: Up to 22 fluid ounces of this product per acre may be
applied to Roundup Ready 2 Yield soybean for weed control prior to harvest
after pods have set and lost all green color. Take care to avoid excessive seed
shatter loss due to ground application equipment.
RESTRICTIONS: Allow a minimum of 14 days between application and harvest
of soybean grain or feeding of soybean grain, forage or hay.
Post-Harvest
USE INSTRUCTIONS: This product may be applied for weed control after
harvest of Roundup Ready 2 Yield soybean. Higher rates might be needed for
control of large weeds that were growing in the field at the time of harvest.
Tank mixtures with 2,4-D or dicamba may be used. Ensure that the product
used is labeled for weed control application after harvest of soybean. Read
and follow label directions for all products in the tank mixture.
RESTRICTIONS: Application of this product must be made a minimum of
30 days prior to the planting of any crop not listed on this label.
12.11 Roundup Ready Sugarbeet
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence (In-crop)
USE INSTRUCTIONS: Refer to the following table for maximum application
rates of this product with Roundup Ready sugarbeet.
Maximum Application Rates
Combined total per year for all applications 5.3 quarts per acre
Total for all Preplant, At-Planting,
Preemergence applications 3.3 quarts per acre
Maximum single application rate from
emergence to 8-leaf stage 32 fluid ounces per acre
Total for all applications made from
emergence to 8-leaf stage 56 fluid ounces per acre
Maximum single application rate between
8-leaf stage and canopy closure 22 fluid ounces per acre
Total for all applications made between
8-leaf stage and canopy closure 44 fluid ounces per acre
See the “ROUNDUP READY CROPS” section of this label for information regarding
the use of this product in Roundup Ready crops. See the “PRODUCT INFORMATION”
section of this label for more information on Maximum Application Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting
Roundup Ready sugarbeet.
TANK MIXTURES: This product may be tank-mixed with the following products
and applied prior to crop emergence. Ensure that the product used is labeled for
application prior to emergence of sugarbeet. Read and follow label directions for
all products in the tank mixture.
ethofumesate
Norton SC
RESTRICTIONS: Maximum quantity of this product that may be applied for all
preplant, at-planting and preemergence applications combined is 3.3 quarts
per acre per season.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied over the top of Roundup
Ready sugarbeet for control of annual grasses and broadleaf weeds from
emergence to 30 days prior to harvest. To maximize yield potential, eliminate
competing weeds early. Up to 4 applications of this product may be made with
a minimum of 10 days between each application. This product will control
or suppress most perennial weeds. For some perennial weeds, more than
one application might be needed to eliminate crop competition throughout
the growing season. Refer to the “ANNUAL WEEDS RATE SECTION” and
“PERENNIAL WEEDS RATE SECTION” of this label for application rates for
specific weeds.
TANK MIXTURES: This product may be tank-mixed with the following
products and applied postemergence (in-crop) over the top of Roundup
Ready sugarbeet. Ensure that the product used is labeled for application
postemergence (in-crop) to sugarbeet. Read and follow label directions for
all products in the tank mixture.
clethodim; clopyralid; desmedipham; dimethenamid-P; ethofumesate;
s-metolachlor; phenmedipham; quizalofop-p-ethyl; triflusulfuron methyl
Assure II; Betamix; Betanex; Dual MAGNUM; Dual II MAGNUM; Norton SC;
Outlook; Progress; Select; Select 2 EC; Select Max Herbicide with Inside
Technology; Stinger; Upbeet, Warrant
Betamix, Betanex, Norton SC and Progress can cause significant sugarbeet
injury.  Refer to these product labels for crop injury precautions.
RESTRICTIONS: The combined total application of this product from crop
emergence through harvest must not exceed 100 fluid ounces per acre. The
maximum rate for any single application from crop emergence until the 8-leaf
stage is 32 fluid ounces per acre. The maximum rate for any single application
between the 8-leaf stage and canopy closure is 22 fluid ounces per acre. Allow
a minimum of 30 days between application and sugarbeet harvest.
13.0 FARMSTEAD USE
TYPES OF USES: Farmstead Weed Control; Trim-and-Edge; Greenhouse/Shadehouse;
Chemical Mowing; Cut Stump Application; Habitat Management
USE INSTRUCTIONS: Refer to the “ANNUAL WEEDS RATE SECTION” and
“PERENNIAL WEEDS RATE SECTION” of this label for application rates for
specific weeds. When applied as directed, this product will control those
annual and perennial grasses and broadleaf weeds.  Application rates of
this product specified in the following sections, or on separate supplemental
labeling or Fact Sheets published for this product, for hard-to-control weeds
supersede rates in the “ANNUAL WEEDS RATE SECTION” and “PERENNIAL
WEEDS RATE SECTION” of this label.
13.1 Farmstead Weed Control, Trim-and-Edge
USE INSTRUCTIONS: This product may be used to control annual and perennial
weeds, woody brush, trees and vines found on any part of the farmstead,
including around building foundations and equipment storage areas, along and
in fences, in dry ditches and canals, along ditch banks, driveways, farm roads,
farmyards, fencerows, parking areas, rangeland, rights-of-way, shelterbelts,
storage areas and prior to planting landscape ornamentals.
TANK MIXTURES: This product may be tank-mixed with the following products,
provided that the product used is labeled for these sites and uses. Refer to
each individual product label for approved sites and application rates. Read
and follow label directions for all products in the tank mixture.
2,4-D; bromacil; chlorosulfuron; dicamba; diuron; imazapic; imazapyr;
metsulfuron-methyl; oryzalin; oxadiazon; pendimethalin; prodiamine;
simazine; sulfometuron-methyl
Arsenal; Banvel; Banvel 480; Barricade 4L; Barricade 65WG; Clarity;
Diuron 4L; Endurance; Escort XP; Karmex DF; Krovar I DF; Oust XP;
Pendulum 3.3 EC; Pendulum 2G; Pendulum Aqua Cap; Plateau; Princep
4L; Princep Caliber 90; Princep Liquid; Ronstar 50 WSP; Ronstar Flo;
Ronstar G; Sahara DG; Simazine 4L; Simazine 4L Flowable; Simazine
90DF; Simazine 90 WDG; Surflan AS Agricultural; Surflan AS Specialty;
Surflan Flex; Surflan Flex T&O; Surflan XL 2G; Telar XP; Vanquish
For annual weeds, apply 22 fluid ounces of this product per acre when weeds
are less than 6 inches tall, 32 fluid ounces when weeds are 6 to 12 inches
tall, and 44 fluid ounces when weeds are greater than 12 inches tall. For
perennial weeds, apply 44 fluid ounces to 3.3 quarts per acre in a tank-mix
with one of the products listed here. For application of tank mixtures using
a backpack sprayer, handgun or other handheld applicator, see the “ANNUAL
WEEDS RATE SECTION” and “PERENNIAL WEEDS RATE SECTION” of this label
for the required concentration of this product in the mix.
13.2 Greenhouse/Shadehouse
USE INSTRUCTIONS: This product may be used to control weeds in and around
greenhouses and shadehouses.
PRECAUTIONS: Remove desirable vegetation before applying this product
inside a greenhouse or shadehouse.
RESTRICTIONS: Turn air circulation fans off before applying this product inside
a greenhouse or shadehouse and until the application solution has dried. Do
not use inside residential greenhouses.
13.3 Chemical Mowing
USE INSTRUCTIONS: This product may be used to suppress growth of
perennial grasses listed in this section along farm ditches and on any other
part of the farmstead to serve as a substitute for mowing. Apply 4 fluid ounces
of this product per acre to suppress Kentucky bluegrass, tall fescue, fine
fescue, orchardgrass, bahiagrass or quackgrass covers, 11 fluid ounces to
suppress bermudagrass, or 44 fluid ounces to suppress torpedograss or para
grass. Make all applications in 10 to 20 gallons of spray solution per acre.
19

PRECAUTIONS: Use only in areas where some temporary injury or
discoloration of perennial grasses can be tolerated.
13.4 Cut Stump Application
TYPES OF USES:    Treating brush and tree stumps on any terrestrial site
USE INSTRUCTIONS: This product may be used to control re-growth and
re-sprouting of many species of woody brush and trees. Cut the woody brush
or tree close to the soil surface and immediately apply a 50- to 100-percent
(undiluted) solution of this product to the freshly cut surface using application
equipment capable of covering the entire cambium. A delay in application
could result in reduced performance. For enhanced results, cut the woody
brush or tree during period of active growth and full leaf expansion and apply
this product. Some of the species controlled by this method of application
of this product are:
Alder Pepper, Brazilian Sweetgum
Eucalyptus Pine, Austrian Tan oak
Madrone Reed, giant Willow
Oak Saltcedar
PRECAUTIONS: Do not make a cut stump application when the roots of
desirable woody brush or trees might be grafted to the roots of the cut stump.
Some sprouts, stems, or trees can share a common root system. Adjacent
trees having a similar age, height and spacing could be an indicator of a
shared root system. Whether grafted or shared, injury is likely to occur to
adjacent stems or trees when this product is applied to one or more trees
sharing a common root system.
13.5 Habitat Management
TYPES OF USES: Habitat Restoration and Maintenance; Wildlife Food Plots
Habitat Restoration and Maintenance
USE INSTRUCTIONS: This product may be used to control exotic and other
undesirable vegetation in habitat management areas. Application may be
made to allow recovery of native plant species or prior to planting desirable
native species, and for similar broad-spectrum vegetation control in habitat
management areas. Spot treatment may be used to selectively remove
unwanted plants for habitat maintenance and enhancement.
Wildlife Food Plots
USE INSTRUCTIONS: This product may be used to eliminate annual and
perennial weeds prior to planting wildlife food plots. Any wildlife food species
may be planted after applying this product or native species may be allowed to
repopulate the area. If tillage is needed to prepare a seedbed, wait a minimum
of 7 days after application before tilling.
RESTRICTIONS: There are no rotational restrictions for planting any wildlife
food species or for allowing native species to repopulate the area following
application of this product.
14.0 ANNUAL WEEDS RATE SECTION
When water carrier volumes are between 16 and 40 gallons per acre
for ground application, and between 6 and 15 gallons per acre for aerial
application, the following use rates will control the annual weeds listed in the
“ANNUAL WEEDS RATE TABLE” that follows.
•  22 fluid ounces per acre – grass and broadleaf annual weeds less than
6 inches in height or circumference, and vines less than 3 inches in length.
•  32 fluid ounces per acre – grass and broadleaf annual weeds 6 to
12 inches in height or circumference, and vines 3 to 6 inches in length.
•  44 fluid ounces per acre – grass and broadleaf annual weeds greater than
12 inches in height or circumference, and vines greater than 6 inches in length.
WHEN WATER CARRIER VOLUMES ARE BETWEEN 3 AND 15 GALLONS
PER ACRE FOR GROUND APPLICATION, AND BETWEEN 3 AND 5 GALLONS
PER ACRE FOR AERIAL APPLICATION, USE THE RATES SPECIFIED FOR
INDIVIDUAL WEEDS INDICATED IN THE “ANNUAL WEEDS RATE TABLE.”
Apply to actively growing annual weeds. New leaf development indicates
active growth.
Annual weeds are often easiest to control when they are small. Control of
older, mature (hardened) or otherwise hard-to-control annual weed species
could require higher application rates than specified in this table, even if
they meet the size requirements listed. This product may be applied at rates
of up to 44 fluid ounces per acre for hard-to-control annual weeds and
where dense weed populations exist. Follow all precautions and restrictions,
including maximum application rates and crop stage timings specified in the
directions for use on specific crops, including Roundup Ready crops, and use
sites listed on this label.
Maximum size refers to the maximum plant height, length of runners for vines,
or circumference of rosette plants in inches.
Do not tank-mix this product with soil residual herbicides when applying at
these rates, unless otherwise directed.
For control of annual weeds using a handheld controlled droplet applicator
(CDA), apply a 20-percent solution of this product (25 to 26 fluid ounces of
this product per gallon of spray solution) at a flow rate of 2 fluid ounces per
minute and a walking speed of 1.5 miles per hour (1 quart per acre). When
using a vehicle-mounted CDA, apply the required amount of this product, as
indicated in the following table, in 2 to 15 gallons of water per acre.
For weeds that have been mowed, grazed or cut, allow re-growth to occur prior
to application of this product.
ANNUAL WEEDS RATE TABLE
Broadcast Application Rate
(fluid ounces per acre)
11 16 22 27 32
Weed Species Maximum Height/Length (inches)
Ammannia, purple 3 6 12 - 18
Anoda, spurred - 2 3 5 8
Barley 18 18 + - - -
Barnyardgrass - 3 6 7 9
Bassia, fivehook - - 6 - -
Beggarweed, Florida - 5 8 - -
Bittercress 12 20 - - -
Bluegrass, annual 10 - - - -
Bluegrass, bulbous 6 - - - -
Brome, downy1,2 6 12 - - -
Brome, Japanese 6 12 24 - -
Browntop panicum 6 8 12 - 24
Buckwheat, wild3 - 1 2 - -
Burcucumber - 6 12 - 18
Buttercup 12 20 - - -
Carolina geranium - - 4 - 9
Carpetweed - 6 12 - -
Cheat2 6 20 - - -
Chervil 20 - - - -
Chickweed - 12 18 - -
Cocklebur 12 18 24 - 36
Copperleaf, hophornbeam - 2 4 - 6
Copperleaf, Virginia - 2 4 - 6
Coreopsis, plains - 6 12 - 18
Corn, volunteer 6 12 20 - -
Corn speedwell 12 - - - -
Crabgrass 3 6 12 - -
Crowfootgrass - - 6 - 12
Cutleaf evening primrose - - 3 - 6
Devilsclaw (unicorn plant) - 3 6 - -
Dwarf dandelion 12 - - - -
Eastern mannagrass 8 12 - - -
Eclipta - 4 8 12 -
Fall panicum 4 - 6 - 12
False dandelion - 20 - - -
Falseflax, smallseed 12 - - - -
Fiddleneck - 6 12 - -
Field pennycress 6 12 - - -
Filaree - - 6 - 12
Fleabane, annual 6 20 - - -
Broadcast Application Rate
(fluid ounces per acre)
11 16 22 27 32
Weed Species Maximum Height/Length (inches)
Fleabane, hairy* (Conyza bonariensis) - - 6 - 10
Fleabane, rough 3 6 12 - -
Florida pusley - - 4 - 6
Foxtail; giant, bristly, yellow 6 12 20 - -
Foxtail, Carolina 10 - - - -
Foxtail, green 12 - - - -
Goatgrass, jointed 6 12 - - -
Goosegrass* - 3 6 - 12
Grain sorghum (milo) 6 12 20 - -
Groundcherry - 3 6 - 9
Groundsel; common, cressleaf - 6 10 - -
Hemp sesbania - 2 4 6 8
Henbit - - 6 - 12
Horseweed/ Marestail*
(Conyza canadensis) - 6 12 - 18
Itchgrass 6 8 12 - 18
Jimsonweed - - 12 - 18
Johnsongrass, seedling* 6 12 18 - 24
Junglerice* - 3 6 7 9
Knotweed - - 6 - 12
Kochia*4 - 3 to 6 12 - -
Lambsquarters - 6 12 - 20
Little barley 6 12 - - -
London rocket 6 - 24 - -
Mayweed - 2 6 12 18
Morning glory, annual (Ipomoea spp.) - - 3 - 6
Mustard; blue, tansy, tumble, wild 6 12 18 - -
Nightshade; black, hairy - 4 6 - 12
Oats 3 6 18 - -
Pigweed, Palmer* - 12 18 24 -
Pigweed species* - 12 18 24 -
Prickly lettuce - 6 12 - -
Purslane - - 3 - 6
Ragweed; common,* giant* - 6 12 - 18
Red rice - - 4 - -
Rye, volunteer/cereal2 6 18 18 + - -
Ryegrass species* - - 6 - 12
Sandbur, field 6 12 - - -
Sandbur, longspine 6 12 - - -
Shattercane 6 12 20 - -
Shepherd’s-purse 6 12 - - -
Sicklepod - 2 4 - 8
Signalgrass, broadleaf - 3 6 7 9
Smartweed, ladysthumb - - 6 - 9
Smartweed, Pennsylvania - - 6 - 9
Sowthistle, annual - - 6 - 12
Spanish needles - - 6 - 12
Speedwell, purslane 12 - - - -
Sprangletop 6 12 20 - -
Spurge; prostrate, spotted - 6 12 - -
Spurry, umbrella 6 - - - -
Stinkgrass - 12 - - -
Sunflower 12 18 - - -
Swinecress - 5 12 - -
Teaweed/ Prickly sida - 2 4 - 6
Texas panicum 6 8 12 - 24
Thistle, Russian*5 - 6 12 - -
Velvetleaf - - 6 - 12
Virginia pepperweed - 18 - - -
Waterhemp* - - 6 - 12
Wheat2 6 12 18 - -
Wheat (overwintered) - 6 12 - 18
Wild oats 3 6 18 - -
Wild proso millet - 6 12 - 18
Witchgrass - 12 - - -
Woolly cupgrass - 6 12 - -
Yellow rocket - 12 20 - -
20

1 For control of downy brome in no-till systems, apply 16 fluid ounces of this
product per acre.
2 Performance of this product can be enhanced if application is made before
this weed reaches the boot stage of growth.
3 Apply 16 fluid ounces of this product per acre to control wild buckwheat
in the cotyledon to 2-leaf stage. Apply 22 fluid ounces per acre to control
2- to 4-leaf wild buckwheat. For enhanced control of wild buckwheat over
2 inches in size, make sequential applications of 22 fluid ounces followed by
22 fluid ounces of this product per acre.
4 Do not apply when kochia is in the button stage.
5 Control of Russian thistle can vary based on environmental conditions and
spray coverage. If possible, apply this product in a tank mixture with 2,4-D,
as described in the following section, to improve control.
* A glyphosate-resistant biotype has been confirmed. For additional
information, refer to the “WEED RESISTANCE MANAGEMENT” section
of this label. You can also visit via the Internet, www.weedscience.org or
www.weedresistancemanagement.com, or contact your Bayer CropScience
LP representative.
14.1 Annual Weeds—Tank Mixtures with
  2,4-D, Dicamba or Tordon 22K
Enhanced control of certain hard-to-control weeds can be achieved by
tank-mixing this product with dicamba, 2,4-D, or Tordon 22K. An appropriate
rate of these other herbicides combined with the rate of this product specified
in the “ANNUAL WEEDS RATE TABLE” will control the following weeds
up to the maximum height or length indicated: 6 inches—prickly lettuce,
marestail/horseweed, morning glory, kochia (in a tank-mix with dicamba only),
wild buckwheat (in a tank-mix with Tordon 22K only); 12 inches—cocklebur,
lambsquarters, pigweed, Russian thistle (in a tank-mix with 2,4-D only).
At application rates listed in the “ANNUAL WEEDS RATE SECTION,” this
product will control the following weeds up to a maximum height or length
of 6 inches: common ragweed, giant ragweed, Pennsylvania smartweed,
and velvetleaf. For enhanced control of these weeds, apply this product in
a tank-mix with 2,4-D.
Ensure that the product used is labeled for application at the desired
site. Follow all precautions and limitations on the tank-mix product label,
including any application timing restrictions, soil restrictions, minimum
re-cropping intervals and/or crop rotation restrictions. Use according to the
more restrictive label requirements. Some crop injury could occur if dicamba
or Tordon 22K is applied within 45 days of planting.
14.2 Annual Weeds—Handheld Sprayers
For control of weeds listed in the “ANNUAL WEEDS RATE TABLE,” apply a
0.4-percent solution of this product to weeds less than 6 inches in height
or runner length prior to seedhead formation in grasses or bud formation in
broadleaf weeds. For control of annual weeds over 6 inches tall, or unless
otherwise directed, use a 0.7-percent solution.
For enhanced results on hard-to-control perennials, such as bermudagrass,
dock, field bindweed, hemp dogbane, milkweed and Canada thistle, apply a
1.5-percent solution of this product.
When using application methods that result in less than complete coverage, apply
a 4-percent solution of this product for control of annual and perennial weeds,
and a 4- to 7-percent solution for control of woody brush, trees and vines.
14.3 Annual Weeds—Tank Mixtures for Fallow
  and Reduced Tillage Systems
For use only in Colorado, Kansas, Nebraska, Oklahoma, Oregon, South Dakota
and Washington. In Oregon and Washington, do not exceed 1 pound of atrazine
per acre.
Application of 16 to 20 fluid ounces of this product per acre in a tank
mixture with atrazine will provide enhanced control of the following weeds:
barnyardgrass (requires 20 fluid ounces of this product per acre for control),
downy brome, green foxtail, lambsquarters, prickly lettuce, tansy mustard,
pigweed, field sandbur, stinkgrass, Russian thistle, volunteer wheat
and witchgrass. For control of kochia, apply 16 to 20 fluid ounces of this
product in a tank-mix with atrazine and dicamba. Ensure that the atrazine
and dicamba products are labeled for the intended use and application site.
Follow all precautions and limitations on the tank-mix product label, including
any application timing restrictions, soil restrictions, minimum re-cropping
intervals and/or crop rotation restrictions.
15.0 PERENNIAL WEEDS RATE SECTION
Apply this product to actively growing perennial weeds. New leaf development
indicates active growth. Enhanced results can be obtained when soil moisture
is adequate for active weed growth.
If weeds have been recently mowed or tilled, do not apply this product until
plants have resumed active growth and have reached the specified stage of
growth or sufficient growth has been achieved to allow for good interception of
the spray solution. For enhanced control, do not mow, cut, till, burn or disturb
vegetation in the application area for a minimum of 7 days after application.
For control of perennial weeds using a handheld controlled droplet applicator
(CDA), apply a 20- to 30-percent solution of this product (25 to 38 fluid
ounces per gallon of applicator solution) at a flow rate of 2 fluid ounces per
minute and a walking speed of 0.75 mile per hour (2 to 3 quarts per acre).
When using a vehicle-mounted CDA, apply the appropriate amount of this
product, as indicated in the following rate table, in 2 to 15 gallons of water
per acre.
This product has no soil activity and does not control emergence of perennial
weeds from seed and dormant underground roots, rhizomes or tubers present
in the soil at the time of application. More than one application of this product
might be necessary to control weeds regenerating from underground parts
or seed, but must be made prior to crop emergence, except where in-crop
application is allowed.
Application of this product in the fall must be made before a killing frost.
Unless otherwise directed, allow a minimum of 7 days after application before
soil tillage.
PERENNIAL WEEDS RATE TABLE
Weed Species
Broadcast
Rate
(quarts/
acre)
Water
Volume
(gallons/
acre)
Handheld
Sprayer
Concentration
(% solution)
Alfalfa 1 – 1.5 3 – 10 1.5%
Apply after the last hay cutting in the fall and alfalfa has re-grown to a height of
6 to 8 inches or more. Follow with deep tillage after a minimum of 7 days after
application, but before soil freeze-up.
Alligatorweed 3 3 – 20 1%
For partial control, apply this product when most target plants are in bloom. More
than one application will be needed to achieve control.
Anise (fennel)1 - - 1 – 1.5%
Bahiagrass2 2 – 3.3 3 – 20 1.5%
Bentgrass 1 10 – 20 1.5%
For suppression in grass seed production areas using ground application equipment
only. Ensure entire crown area has resumed growth prior to application in the fall.
Ensure that bentgrass has at least 3 inches of growth before application. Avoid
tillage prior to application. Tillage 7 to 10 days after application provides enhanced
results.
Bermudagrass 2 – 3.3 3 – 20 1.5%
For control, apply 3.3 quarts of this product per acre when bermudagrass is actively
growing and seedheads are present. More than one application might be necessary to
achieve control. For partial control, apply 64 fluid ounces per acre.
Bermudagrass, water
(knotgrass) 0.7 – 1 5 – 10 1.5%
Apply 32 fluid ounces of this product in 5 to 10 gallons of water per acre when
water bermudagrass is 12 to 18 inches in length. Allow a minimum of 7 days after
application before tilling, flushing or flooding the field.
For fall application, till fallow fields and apply 22 fluid ounces of this product in
5 to 10 gallons of water per acre prior to frost and when water bermudagrass is
12 to 18 inches in length.
This product is not registered in the State of California for control of water
bermudagrass.
Bindweed, field 0.4 – 3.3 3 – 20 1.5%
Weed Species
Broadcast
Rate
(quarts/
acre)
Water
Volume
(gallons/
acre)
Handheld
Sprayer
Concentration
(% solution)
Do not apply this product when field bindweed is under drought stress, as good soil
moisture is necessary for active growth and efficacy of this product.
For control, apply 2.5 to 3.3 quarts of this product per acre west of the Mississippi
River and 2 to 2.5 quarts per acre east of the Mississippi River when bindweed is
at or beyond full bloom. For enhanced results, apply in late-summer or fall. Fall
application must be made before a killing frost.
Also for control, apply 44 fluid ounces of this product plus an appropriate rate of
dicamba in 10 to 20 gallons of water per acre. Do not apply this mixture using aerial
application equipment.
For suppression of field bindweed on irrigated agricultural land, apply 22 to
44 fluid ounces of this product plus an appropriate rate of 2,4-D in 10 to 20 gallons
of water per acre using ground application equipment only. Application may be made
following harvest or on fallow ground in the fall when bindweed is actively growing
and the majority of runners are 12 inches or more in length. Irrigate at least once to
promote active bindweed growth.
For suppression, apply 11 fluid ounces of this product plus a rate of 2,4-D that
will provide suppression of field bindweed in 3 to 10 gallons of water per acre
using ground application equipment, or in 3 to 5 gallons of water per acre using
aerial application equipment. Application of this tank-mix using aerial equipment
is only allowed on fallow fields and in reduced tillage systems. Delay application
until maximum emergence has occurred and vines are 6 to 18 inches in length.
In California only , apply 22 fluid ounces to 3.3 quarts of this product per acre.
Actual rate needed for suppression or control will vary within this range depending
on local conditions. For suppression on irrigated land where annual tillage is
performed, apply 22 fluid ounces of this product in 3 to 10 gallons of water per acre
to bindweed that has reached a length of 12 inches or greater. Allow maximum weed
emergence and runner growth before applying this product. Allow a minimum of
3 days after application before tillage.
Bluegrass, Kentucky 0.7 – 1.5 3 – 40 1.5%
Apply 44 fluid ounces of this product in 10 to 40 gallons of water per acre when most
plants have reached the boot to early-seedhead stage of development. For partial
control in pasture or hay crop renovation, apply 22 to 32 fluid ounces of this product
in 3 to 10 gallons of water per acre to actively growing target plants when most have
reached 4 to 12 inches in height.
Blueweed, Texas 2 – 3.3 3 – 40 1.5%
Apply 2.5 to 3.3 quarts of this product per acre west of the Mississippi River or 2 to
2.5 quarts per acre east of the Mississippi River when plants are at or beyond full
bloom. For enhanced results, apply in late-summer or fall. Fall application must be
made before a killing frost.
Brackenfern 2 – 3 3 – 40 1%
Make application to fully expanded fronds that are at least 18 inches long.
Bromegrass, smooth 0.7 – 1.5 3 – 40 1.5%
Apply 44 fluid ounces of this product in 10 to 40 gallons of water per acre when most
target plants have reached the boot to early-seedhead stage of development. For
partial control in pasture or hay crop renovation, apply 22 to 32 fluid ounces of this
product in 3 to 10 gallons of water per acre to actively growing bromegrass when it
has reached a height of 4 to 12 inches.
Bursage, woolly-leaf - 3 – 20 1.5%
For control, apply 44 fluid ounces of this product plus 0.5 pound of dicamba per acre
when plants are producing new active growth that has been initiated by moisture for
at least 2 weeks and are at or beyond flowering. For partial control, apply 22 fluid
ounces of this product per acre in a tank-mix with an appropriate rate of dicamba
that will provide partial control.
Canarygrass, reed2 1.5 – 2 3 – 40 1.5%
Cattail2 2 – 3.3 3 – 40 1.5%
Clover; red, white1 2 – 3.3 3 – 20 1.5%
Also for control, apply 11 to 22 fluid ounces of this product in a tank-mix with an
appropriate rate of 2,4-D in 3 to 10 gallons of water per acre.
Cogongrass 2 – 3.3 10 – 40 1.5%
Apply in late-summer or fall when cogongrass is at least 18 inches tall. Due to
uneven stages of growth and the dense nature of this vegetation preventing good
spray coverage, more than one application might be necessary to achieve control.
Dallisgrass2 2 – 3.3 3 – 20 1.5%
21

Weed Species
Broadcast
Rate
(quarts/
acre)
Water
Volume
(gallons/
acre)
Handheld
Sprayer
Concentration
(% solution)
Dandelion1 2 – 3.3 3 – 40 1.5%
Also for control, apply 11 fluid ounces of this product in a tank-mix with an
appropriate rate of 2,4-D in 3 to 10 gallons of water per acre.
Dock, curly1 2 – 3.3 3 – 40 1.5%
Also for control, apply 11 to 22 fluid ounces of this product in a tank-mix with an
appropriate rate of 2,4-D in 3 to 10 gallons of water per acre.
Dogbane, hemp 3 3 – 40 1.5%
Apply when most target plants have reached the late-bud to flower stage of
development. Allow weeds to re-grow to a mature stage prior to application of this
product after crop harvest or mowing. For enhanced results, apply in late-summer or fall.
For suppression, apply 11 fluid ounces of this product in a tank-mix with an
appropriate rate of 2,4-D in 3 to 10 gallons of water per acre using ground application
equipment, and in 3 to 5 gallons of water per acre using aerial application equipment.
Delay application until maximum emergence of hemp dogbane has occurred.
Fescue (except tall)2 2 – 3.3 3 – 20 1.5%
Fescue, tall 0.7 - 2 3 – 40 1.5%
Apply 64 fluid ounces of this product per acre when most tall fescue has reached the
boot to early-seedhead stage of development. For fall application, apply 22 fluid ounces
of this product in 3 to 10 gallons of water per acre when plants have 6 to 12 inches
of new growth. A sequential application of 11 fluid ounces of this product per acre will
improve long-term control and will control seedlings germinating after fall application
or in the following spring.
Guinea grass 1.5 – 2 3 – 40 1%
Apply when most target plants have reached the 7-leaf stage of growth. Ensure
thorough coverage when using a handheld sprayer. In Texas and the ridge of Florida,
apply 44 fluid ounces of this product per acre for control. In the flatwoods region of
Florida, 64 fluid ounces per acre is needed for control.
Horsenettle1 2 – 3.3 3 – 20 1.5%
Horseradish 3 3 – 40 1.5%
Apply when most plants have reached the late-bud to flower stage of growth. For
enhanced results, apply in late-summer or fall.
Iceplant1 - - 1.5 – 2%
Thorough coverage of the target weed with this product will provide enhanced control.
Jerusalem artichoke1 2 – 3.3 3 – 20 1.5%
Johnsongrass 0.4 – 2 3 – 40 1%
In annual cropping systems, apply 22 to 44 fluid ounces of this product in 3 to
10 gallons of water per acre. Use 44 fluid ounces of this product when applying in
10 to 40 gallons of water per acre. On non-crop sites or in areas where annual tillage
is not practiced (no-till), apply 44 to 64 fluid ounces of this product in 10 to 40 gallons
of water per acre. For enhanced results, apply when most johnsongrass has reached
the boot to head stage of development or in the fall prior to frost. Allow a minimum of
7 days after application before tillage. Do not tank-mix with residual herbicides when
applying 22 fluid ounces of this product per acre. For burndown of johnsongrass, apply
11 fluid ounces of this product in 3 to 10 gallons of water per acre before plants reach
a height of 12 inches and allow a minimum of 3 days after application before tillage.
For partial control or suppression, apply a 0.7-percent solution of this product as a
spot treatment when johnsongrass is 12 to 18 inches tall. Ensure that spray coverage
is uniform and complete.
Kikuyu grass 1.5 – 2 3 – 40 1.5%
Apply when most kikuyu grass is at least 8 inches tall (3- or 4-leaf stage of growth).
Allow a minimum of 3 days after application before tillage.
Knapweed 3 3 – 40 1.5%
Apply when most target plants have reached the late-bud to flower stage of growth.
For enhanced results, apply in late-summer or fall.
Lantana - - 1%
Apply at or beyond the bloom stage of growth.
Lespedeza1 2 – 3.3 3 – 20 1.5%
Milkweed, common 2 3 – 40 1.5%
Apply when most plants have reached the late-bud to flower stage of growth.
Muhly, wirestem 0.7 – 1.5 3 – 40 1.5%
Apply 22 fluid ounces of this product in 3 to 10 gallons of water per acre, or 44 fluid
ounces when applying in 10 to 40 gallons of water per acre or whenever applying in
pasture, sod, or non-crop areas, when wirestem muhly is at least 8 inches tall. Do not
till the soil between harvest and fall application, or in the fall or spring prior to spring
application. Allow a minimum of 3 days after application before tillage.
Weed Species
Broadcast
Rate
(quarts/
acre)
Water
Volume
(gallons/
acre)
Handheld
Sprayer
Concentration
(% solution)
Mullein, common1 2 – 3.3 3 – 20 1.5%
Napiergrass2 2 – 3.3 3 – 20 1.5%
Nightshade, silverleaf 1.5 3 – 10 1.5%
For enhanced results, apply when at least 60 percent of the target plants have
berries. Fall application must be made before a killing frost.
Nutsedge; purple, yellow 0.4 – 2 3 – 40 1 – 1.5%
For control of nutsedge plants and immature nutlets, apply 64 fluid ounces of this
product per acre or a 1- to 1.5-percent solution when plants are in flower or when
new nutlets can be found at rhizome tips. Nutlets that have not germinated will not
be controlled and will need repeated applications of this product after germination for
long-term control. Sequential applications of 22 to 44 fluid ounces of this product in
3 to 10 gallons of water per acre when a majority of the nutsedge plants are in the 3- to
5-leaf stage (less than 6 inches tall) will also provide control. Repeat this application
as necessary when newly emerging plants reach the 3- to 5-leaf stage. Subsequent
applications will be necessary for long-term control. For partial control of existing
nutsedge, apply 11 to 44 fluid ounces of this product in 3 to 40 gallons of water per
acre when plants have 3 to 5 leaves and most are less than 6 inches tall.  Repeat this
application as needed to control newly emerging plants or re-growth of existing plants.
Orchardgrass 0.7 – 1.5 3 – 40 1.5%
Apply 44 fluid ounces of this product in 10 to 40 gallons of water per acre when most
plants have reached the boot to early-seedhead stage of development. For partial
control in pasture or hay crop renovation, apply 22 to 32 fluid ounces of this product
in 3 to 10 gallons of water per acre when orchardgrass is actively growing and has
reached 4 to 12 inches in height. When going from orchardgrass sod to no-till corn,
apply 22 to 32 fluid ounces of this product in 3 to 10 gallons of water per acre to
orchardgrass that is a minimum of 12 inches tall for spring application and 6 inches
tall for fall application. Allow a minimum of 3 days after application before planting.
A sequential application of atrazine will be necessary to achieve optimum results.
Pampas grass - - 1 – 1.5%
Apply this product when pampas grass is at or beyond the boot stage of growth.
Thorough coverage will provide enhanced control.
Para grass2 2 – 3.3 3 – 20 1.5%
Phragmites 2 – 3.3 10 – 40 1 – 1.5%
For partial control and enhanced results, apply this product in late-summer or fall
when plants are actively growing and in full bloom. Application before or after this
stage could result in reduced control. Due to the dense nature of this vegetation
(which can prevent good spray coverage) and uneven stages of growth, more than
one application might be necessary to achieve control. Visual symptoms of control
will be slow to develop.
Poison hemlock - - 1 – 1.5%
Apply this product using a handheld sprayer with a spray-to-wet technique.
Optimum results are obtained when thoroughly applied to target plants that are at
the bud to full-bloom stage of growth.
Pokeweed, common 1 3 – 40 1.5%
Apply to actively growing target plants up to 24 inches tall.
Quackgrass 0.7 – 2 3 – 40 1.5%
In annual cropping systems or in pastures and sod fields to be cultivated with
deep tillage, apply 22 fluid ounces of this product in 3 to 10 gallons of water per
acre or 44 fluid ounces in 10 to 40 gallons of water per acre when quackgrass is
6 to 8 inches in height. Do not tank-mix with residual herbicides when using the
22-fluid-ounce rate. Do not till between harvest and fall application, or in the fall
or spring prior to spring application. Allow a minimum of 3 days after application
before tillage. In pastures or sod fields, use a moldboard plow for enhanced results.
In pastures, sod fields or non-crop areas where deep tillage will not follow
application of this product, apply 44 to 64 fluid ounces in 10 to 40 gallons of water
per acre when quackgrass is greater than 8 inches tall.
Redvine 0.5 – 1.5 5 – 10 1.5%
For suppression, make two applications of 16 fluid ounces of this product 7 to
14 days apart, or a single application of 44 fluid ounces, in 5 to 10 gallons of water
per acre in late-September or early-October to plants that are at least 18 inches
tall and have been growing 45 to 60 days since the last tillage operation. Apply a
minimum of 1 week before a killing frost.
Reed, giant - - 1.5%
Enhanced results can be obtained when application is made in late-summer or fall.
Weed Species
Broadcast
Rate
(quarts/
acre)
Water
Volume
(gallons/
acre)
Handheld
Sprayer
Concentration
(% solution)
Ryegrass, perennial 0.7 – 2 3 – 40 1%
In annual cropping systems, apply 22 to 44 fluid ounces of this product in 3 to
10 gallons of water per acre, or 44 fluid ounces when applying in 10 to 40 gallons of
water per acre.  On non-crop sites or in fields where annual tillage is not practiced
(no-till), apply 44 to 64 fluid ounces of this product in 10 to 40 gallons of water per
acre. For enhanced results, apply when most ryegrass has reached the boot to head
stage of growth or in the fall prior to frost. Do not tank-mix with residual herbicides
when applying 22 fluid ounces of this product per acre.
Smartweed, swamp1 2 – 3.3 3 – 40 1.5%
Also for control, apply 11 fluid ounces of this product in a tank-mix with an
appropriate rate of 2,4-D in 3 to 10 gallons of water per acre in late-summer or fall.
Sowthistle, perennial 1.5 – 2 3 – 40 1.5%
Apply when most plants are at or beyond the bud stage of growth. After harvest,
mowing or tillage in late-summer or fall, allow a minimum of 4 weeks for initiation
of active growth and rosette development prior to application of this product. Fall
application must be made before a killing frost. Allow a minimum of 3 days after
application before tillage.
Spurge, leafy - - 1.5%
For suppression, apply 11 fluid ounces of this product in a tank-mix with an
appropriate rate of 2,4-D in 3 to 10 gallons of water per acre in late-summer or fall.
If mowing has occurred, delay application until most target plants are 12 inches tall.
Starthistle, yellow 1.5 10 – 40 1.5%
Enhanced results can be obtained when application is made during the rosette,
bolting or early-flower stage.
Sweet potato, wild - - 1.5%
For partial control, apply to plants that are at or beyond the bloom stage of growth.
More than one application might be needed.
Thistle, artichoke - - 1.5%
For partial control, apply when plants are at or beyond the bloom stage of
growth. More than one application might be needed.
Thistle, Canada 1.5 – 2 3 – 40 1.5%
Apply when most target plants are at or beyond the bud stage of development.
After harvest, mowing or tillage in late-summer or fall, allow a minimum of
4 weeks for initiation of active growth and rosette development prior to
application of this product. Fall application must be made before a killing frost.
For suppression in the spring, apply 22 fluid ounces of this product alone or
11 fluid ounces of this product in a tank-mix with an appropriate rate of 2,4-D
in 3 to 10 gallons of water per acre when rosette is a minimum of 6 inches in
diameter. Application may be made as long as leaves are still green and plants
are actively growing. Allow a minimum of 3 days after application before tillage.
Timothy2 1.5 – 2 3 – 40 1.5%
Torpedograss 2.5 – 3.3 3 – 40 1.5%
For partial control, apply when most target plants are at or beyond the
seedhead stage of development. More than one application will be needed to
achieve control. Fall application must be made before frost.
Trumpetcreeper 1.5 5 – 10 1.5%
For partial control, apply in late-September or October when trumpetcreeper is
a minimum of 18 inches tall and has been growing 45 to 60 days since the last
tillage operation. Make application a minimum of 1 week before a killing frost.
Vaseygrass2 2 – 3.3 3 – 20 1.5%
Velvetgrass2 2 – 3.3 3 – 20 1.5%
Wheatgrass, western2 1.5 – 2 3 – 40 1.5%
1 Apply when most plants have reached the early-bud stage of growth.
2 Apply when most plants have reached the early-heading stage of growth.
16.0 WOODY BRUSH, TREES AND VINES RATE SECTION
Apply this product during full leaf expansion, unless otherwise directed. Use a
higher rate of application or spray solution concentration within a given range
for larger plants or in areas of dense vegetative growth. On vines, use a higher
rate of application or spray solution concentration for plants that have reached
the woody stage. Enhanced results can be obtained when application is made
in late-summer or fall after fruit formation.
22

In arid areas, enhanced results can be obtained when application is made
in spring to early-summer when brush species are at high moisture content
and flowering.
Unless otherwise directed, make broadcast applications in 3 to 40 gallons
of water per acre. Ensure thorough coverage when using handheld sprayers.
Herbicidal symptoms might not appear prior to frost or senescence following
application in the fall.
Allow a minimum of 7 days after application before tillage, mowing or removal
of vegetation in the application area. Repeat applications might be necessary
to control plants regenerating from underground parts or seed. Some autumn
color on undesirable deciduous species is acceptable when applying this
product, provided no major leaf drop has occurred. Reduced performance
could result if fall application is made after a frost.
WOODY BRUSH, TREES AND VINES RATE TABLE
Species
Broadcast Rate
(quarts/acre)
Handheld
Sprayer
Concentration
(% solution)
Alder 2 – 3 1%
Ash1 1.5 – 3.3 1 – 1.5%
Aspen, quaking 1.5 – 2 1%
Bearmat (Bearclover)1 1.5 – 3.3 1 – 1.5%
Beech1 1.5 – 3.3 1 – 1.5%
Birch 1.5 – 2 1%
Blackberry 2 – 3 1%
Apply after target plants have reached full leaf maturity. Enhanced results
can be obtained when application is made in late-summer or fall. Apply
a 0.7-percent solution of this product after berries have set or dropped in
late-fall. After leaf drop and until a killing frost or as long as stems are green, apply
2 to 2.5 quarts of this product in 10 to 40 gallons of water per acre.
Blackgum 1.5 – 3.3 1 – 1.5%
Bracken 1.5 – 3.3 1 – 1.5%
Broom; French, Scotch - 1 – 1.5%
Buckwheat, California1,2 - 1 – 1.5%
Cascara1 1.5 – 3.3 1 – 1.5%
Catsclaw1 - 1%
Ceanothus1 1.5 – 3.3 1 – 1.5%
Chamise2 - 1%
Cherry; bitter, black, pin 1.5 – 2 1%
Coyote brush - 1 – 1.5%
Apply when at least 50 percent of the new leaves are fully developed.
Dogwood1 1.5 – 3.3 1 – 1.5%
Elderberry 1.5 – 2 1%
Elm1 1.5 – 3.3 1 – 1.5%
Eucalyptus - 1.5%
For control of eucalyptus re-sprouts, apply when re-sprouts are 6 to 12 feet tall.
Ensure complete coverage. Application to drought-stressed eucalyptus plants will
result in less than optimum results.
Florida holly (Brazilian Peppertree)1 1.5 – 3.3 1 – 1.5%
Gorse1 1.5 – 3.3 1 – 1.5%
Hasardia1,2 - 1 – 1.5%
Hawthorn 1.5 – 2 1%
Hazel 1.5 – 2 1%
Hickory1 1.5 – 3.3 1 – 1.5%
Honeysuckle 2 – 3 1%
Hornbeam, American1 1.5 – 3.3 1 – 1.5%
Kudzu 2.5 – 3.3 1.5%
More than one application might be needed to achieve control.
Locust, black1 1.5 – 3 1 – 1.5%
Madrone re-sprouts1 - 1.5%
Apply to re-sprouts that are 3 to 6 feet tall. Enhanced results can be obtained with
spring or early-summer application.
Manzanita1 1.5 – 3.3 1 – 1.5%
Species
Broadcast Rate
(quarts/acre)
Handheld
Sprayer
Concentration
(% solution)
Maple, red 1.5 – 3 1%
Apply a 1-percent solution when at least 50 percent of the new leaves are fully developed.
For partial control, apply 44 to 86 fluid ounces of this product per acre.
Maple, sugar - 1%
Apply when at least 50 percent of the new leaves are fully developed.
Monkey flower1,2 - 1 – 1.5%
Oak; black, white1 1.5 – 3 1 – 1.5%
Oak, post 2 – 3 1%
Oak, northern - 1%
Apply when at least 50 percent of the new pin leaves are fully developed
Oak, southern red 1.5 – 2 1%
Persimmon1 1.5 – 3.3 1 – 1.5%
Pine 1.5 – 3.3 1 – 1.5%
Poison ivy/Poison oak 2.5 – 3.3 1.5%
More than one application might be needed to achieve control. Application in the fall
must be made before leaves lose green color.
Poplar, yellow1 1.5 – 3.3 1 – 1.5%
Redbud, eastern 1.5 – 3.3 1 – 1.5%
Rose, multiflora 1.5 1%
Make application prior to leaf deterioration by leaf-eating insects.
Russian olive1 1.5 – 3.3 1 – 1.5%
Sage, black2 - 1%
Sage, white1 1.5 – 3.3 1 – 1.5%
Sagebrush, California 2 - 1%
Salmonberry 1.5 – 2 1%
Saltcedar 1.5 – 3.3 1 – 1.5%
Sassafras1 1.5 – 3.3 1 – 1.5%
Sourwood1 1.5 – 3.3 1 – 1.5%
Sumac; poison, smooth, winged1 1.5 – 3 1 – 1.5%
Sweetgum 1.5 – 2 1%
Swordfern1 1.5 – 3.3 1 – 1.5%
Tallowtree, Chinese2 - 1%
Tan oak re-sprouts1 - 1.5%
Apply to re-sprouts that are less than 6 feet tall. Enhanced results can be obtained
following application in the fall.
Thimbleberry 1.5 – 2 1%
Tobacco, tree1 - 1 – 1.5%
Trumpetcreeper 1.5 – 2 1%
Vine maple1 1.5 – 3.3 1 – 1.5%
Virginia creeper 1.5 – 3.3 1 – 1.5%
Waxmyrtle, southern1 1.5 – 3.3 1 – 1.5%
Willow 2 – 3 1%
1 Partial Control
2 Thorough coverage of foliage is necessary for enhanced results.
17.0 LIMIT OF WARRANTY AND LIABILITY
Bayer CropScience LP (“Company”) warrants that this product conforms to
the chemical description on the label. TO THE EXTENT CONSISTENT WITH
APPLICABLE LAW, NO OTHER EXPRESS WARRANTY OR IMPLIED WARRANTY
OF FITNESS FOR PARTICULAR PURPOSE OR MERCHANTABILITY IS MADE.
This warranty is also subject to the conditions and limitations stated herein.
Buyer and all users shall use this product only for the purposes of and in
accordance with the Complete Directions for Use label (“Directions”) and
shall promptly notify this Company of any claims whether based in contract,
negligence, strict liability, other tort or otherwise.
To the extent consistent with applicable law, buyer and all users are
responsible for all loss, injuries or damage from use or handling which results
from conditions beyond the control of this Company, including, but not limited
to, incompatibility with products other than those set forth in the Directions,
application to or contact with desirable vegetation, crop injury or failure of
this product to control weed biotypes which develop resistance to glyphosate,
unusual weather, weather conditions which are outside the range considered
normal at the application site and for the time period when the product is
applied, as well as weather conditions which are outside the application
ranges set forth in the Directions, use and/or application in any manner not
explicitly set forth in or inconsistent with the Directions, moisture conditions
outside the moisture range specified in the Directions, or the presence of
products other than those set forth in the Directions in or on the soil, crop
or treated vegetation.
This Company does not warrant any product reformulated or repackaged
from this product except in accordance with this Company’s stewardship
requirements and with express written permission from this Company.
For in-crop (over-the-top) uses on Roundup Ready crops, crop safety and
weed control performance are not warranted by Bayer CropScience LP when
this product is used in conjunction with “brown bag” or “bin run” seed saved
from previous year’s production and replanted.
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY
OF THE USER OR BUYER, AND THE LIMIT OF THE LIABILITY OF THIS COMPANY
OR ANY OTHER SELLER FOR ANY AND ALL LOSSES, INJURIES OR DAMAGES
RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT (INCLUDING
CLAIMS BASED IN CONTRACT, NEGLIGENCE, STRICT LIABILITY , OTHER TORT
OR OTHERWISE) SHALL BE THE PURCHASE PRICE PAID BY THE USER OR
BUYER FOR THE QUANTITY OF THIS PRODUCT INVOLVED, OR, AT THE
ELECTION OF THIS COMPANY OR ANY OTHER SELLER, THE REPLACEMENT
OF SUCH QUANTITY , OR, IF NOT ACQUIRED BY PURCHASE, REPLACEMENT
OF SUCH QUANTITY . TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, IN
NO EVENT SHALL THIS COMPANY OR ANY OTHER SELLER BE LIABLE FOR ANY
INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES.
Upon opening and using this product, buyer and all users are deemed to have
accepted the terms of this LIMIT OF WARRANTY AND LIABILITY which may not
be varied by any verbal or written agreement. If terms are not acceptable,
return at once unopened.
CROPSHIELD and Design, Degree, Harness, Roundup Ready, Roundup
Ready 2 Yield, Roundup WeatherMAX and Design, Rowel, Transorb and Design,
TripleFLEX, TruFlex and Warrant are registered trademarks of Bayer Group.
All other trademarks are the property of their respective owners.
In case of an emergency involving this product,
call collect, day or night, 1-800-334-7577.
©2021
Packed for:
BAYER CROPSCIENCE LP
800 N. LINDBERGH BLVD.
ST. LOUIS, MISSOURI, 63167 USA
23

Herbicide for Roundup Ready® Crops
Selective broad-spectrum weed control in Roundup Ready® crops
Non-selective, broad-spectrum weed control for many agricultural systems and farmsteads.
Not all products listed on this label are registered for use in California. Check the
registration status of each product in California before using.
ACTIVE INGREDIENT:
*Glyphosate, N-(phosphonomethyl) glycine, in the form of its potassium salt  .....   48.8%
OTHER INGREDIENTS: ................................................   51.2%
  100.0%
*Contains 660 grams of the active ingredient glyphosate, in the form of its potassium salt, per liter
or 5.5 pounds per U.S. gallon, which is equivalent to 540 grams of the acid, glyphosate, per liter
or 4.5 pounds per U.S. gallon (39.8% by weight).
PRECAUTIONARY STATEMENTS: Hazards to Humans and Domestic Animals
Keep out of reach of children
CAUTION
Causes moderate eye irritation
Harmful if inhaled
Avoid contact with eyes, skin, or clothing
Avoid breathing vapor or spray mist
FIRST AID
IF IN EYES • Hold eye open and rinse slowly and gently with water for 15 to 20 minutes.
• Remove contact lenses if present after the first 5 minutes then continue
rinsing eye.
• Call a poison control center or doctor for treatment advice.
IF ON
SKIN OR
CLOTHING
• Take off contaminated clothing.
•  Rinse skin immediately with plenty of water for 15 to 20 minutes.
• Call a poison control center or doctor for treatment advice.
IF
INHALED
• Move person to fresh air.
•  If person is not breathing, call 911 or an ambulance, then give artificial
respiration, preferably mouth-to-mouth, if possible.
• Call a poison control center or doctor for treatment advice.
• Have the product container or labeling with you when calling a poison control center or
doctor, or going for treatment.
•  You can also call 1-800-334-7577 , collect, day or night, for emergency medical
treatment information.
•  This product is identified as Roundup WeatherMAX Herbicide , EPA Registration
No. 524-537.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in any manner inconsistent with its labeling.
STORAGE AND DISPOSAL
Proper pesticide storage and disposal are essential to protect against exposure to people
and the environment due to leaks and spills, excess product or waste, and vandalism.
Do not allow this product to contaminate water, foodstuffs, feed or seed by storage or
disposal.
PESTICIDE STORAGE: Store pesticides away from food, pet food, feed, seed, fertilizers,
and veterinary supplies. Keep container closed to prevent spills and contamination. See
individual container label for additional storage conditions, if any.
PESTICIDE DISPOSAL:  To avoid wastes, use all material in this container, including
rinsate, by application according to label directions. If wastes cannot be avoided, offer
remaining product to a waste disposal facility or pesticide disposal program. Such
programs are often run by state or local governments or by industry. All disposal must
be in accordance with applicable federal, state and local regulations and procedures.
CONTAINER HANDLING AND DISPOSAL:  Nonrefillable container. Do not reuse
this container to hold materials other than pesticides or dilute pesticides (rinsate).
After emptying and cleaning, it may be allowable to temporarily hold rinsate or other
pesticide-related materials in this container. Contact your state regulatory agency to
determine allowable practices in your state. Triple rinse or pressure rinse (or equivalent)
this container promptly after emptying. Triple rinse as follows: Empty the remaining contents
into application equipment or mix-tank and continue to drain for 10 seconds after the flow
begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour
rinsate into application equipment or mix-tank, or store rinsate for later use or disposal.
Continue to drain for 10 seconds after the flow begins to drip. Repeat this procedure two
more times. Pressure rinse as follows: Empty the remaining contents into application
equipment or mix-tank and continue to drain for 10 seconds after the flow begins to drip.
Place container so that it can drain directly into application equipment or mix-tank while
rinsing, or collect rinsate for later use or disposal. Insert pressure rinsing nozzle into the
side of the container and rinse at about 40 PSI for at least 30 seconds. Continue to drain for
10 seconds after the flow begins to drip. Once properly rinsed, some plastic pesticide
containers can be taken to a container collection site or picked up for recycling. To find
the nearest collection site, contact your chemical dealer or Bayer CropScience LP at
1-866-99BAYER (1-866-992-2937). If recycling is not available, dispose of in accordance
with federal, state and local regulations and procedures, which may include puncturing the
properly rinsed container and disposing in a sanitary landfill.
FOR PRODUCT INFORMATION OR ASSISTANCE USING THIS PRODUCT,
CALL TOLL-FREE, 1-866-99BAYER (1-866-992-2937).
IN CASE OF AN EMERGENCY INVOLVING THIS HERBICIDE PRODUCT,
OR FOR MEDICAL ASSISTANCE, CALL COLLECT, DAY OR NIGHT, 1-800-334-7577.
EPA Reg. No. 524-537
EPA Est. 524-IA-1
Packed For:
BAYER CROPSCIENCE LP
800 N. LINDBERGH BLVD.
ST. LOUIS, MISSOURI, 63167 USA
©2021 Bayer Group. All rights reserved.
US62218892C     161018Cv4      09/21
NET 2.5 GAL
Roundup WeatherMAX®
Herbicide
161018Cv4
See inside for additional Precautions.