crop-chem-docs/corpus/epa_ppls/100-1571.md

# Orondis

- EPA Reg No: **100-1571**
- Registrant: SYNGENTA CROP PROTECTION, LLC
- Signal word: Caution
- Active ingredients: Oxathiapiprolin (18.7%)
- Label accepted: 2024-05-15
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000100-01571-20240515.pdf

---
1
May 15, 2024
Heidi Irrig
Senior Regulatory Manager
Syngenta Crop Protection, LLC
P.O. Box 18300
Greensboro, NC 27419
Subject: PRIA Label Amendment – Establishmen t of rotational crop tolerances for peanut
hay (#2F8997) and plant back interval reduction for peanut and sugarcane
Product Name: Orondis®
 EPA Registration Number: 100-1571
Application Date: April 8, 2022
 Case Number: 476152
Dear Heidi Irrig:
The application referred to above, submitted under the Federal Insecticide, Fungicide, and
Rodenticide Act (FIFRA), as amended, is acceptable under FIFRA section 3(c)(5).
You must submit and/or cite all data required for registration/reregistration/registration review
of your product when the Agency requires all registrants of similar products to submit such
data.
A stamped copy of your labeling is enclosed for your records. This labeling supersedes all
previously accepted labeling. You must submit one (1) copy of the final printed labeling before
you release the product for shipment with the new labeling. In accordance with 40 CFR
152.130(c), you may distribute or sell this product under the previously approved labeling for
18 months from the date of this letter. After 18 months, you may only distribute or sell this
product if it bears this new revised labeling or subsequently approved labeling. “To distribute or
sell” is defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3.
Should you wish to add/retain a reference to the company’s website on your label, then please
be aware that the website becomes labeling under FIFRA and is subject to review by the
Agency. If the website is false or misleading, the product would be misbranded and unlawful to
sell or distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) lists examples of
statements EPA may consider false or misleading. In addition, regardless of whether a website

Page 2 of 2
EPA Reg. No. 100-1571
Case No. 476152

is referenced on your product’s label, claims made on the website may not substantially differ
from those claims approved through the registration process. Therefore, should the Agency find
or if it is brought to our attention that a website contains false or misleading statements or
claims substantially differing from the EPA approved registration, the website will be referred
to the EPA’s Office of Enforcement and Compliance.

Your release for shipment of the product constitutes acceptance of these conditions. If these
conditions are not complied with, the registration will be subject to cancellation in accordance
with FIFRA section 6.

If you have any questions, please contact Elisha Graham at graham.elisha@epa.gov.

Sincerely,

Kristy Crews, Ph.D., Product Manager 22
Fungicide Branch, Registration Division (7505T)
Office of Pesticide Programs, USEPA


Enclosure- Stamped Label

1
[Master Label]
OXATHIAPIPROLIN GROUP 49 FUNGICIDE
Orondis®
[Alternate Brand Name: Orondis® Gold 200]
Fungicide
Active Ingredient:
Oxathiapiprolin*: ................................................................................................. 18.7%
Other Ingredients: 81.3%
Total: 100.0%
* CAS No. 1003318-67-9
Orondis® is formulated as a suspension c oncentrate and contains 1.67 pounds of
oxathiapiprolin per gallon of product.
KEEP OUT OF REACH OF CHILDREN.
CAUTION/PRECAUCIÓN
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle.
(If you do not understand the label, find someone to explain it to you in detail).
See additional precautionary statements and directions for use inside booklet.
EPA Reg. No. 100-1571
EPA Est.
Formulated in the USA
_______
Net Contents
05/15/2024
100-1571

2

TABLE OF CONTENTS

1.0 FIRST AID
PRECAUTIONARY STATEMENTS
2.0 PRECAUTIONARY STATEMENTS
2.1 Personal Protective Equipment (PPE)
2.2 User Safety Requirements
2.3 Engineering Controls
2.4 User Safety Recommendations
2.5 Environmental Hazards
DIRECTIONS FOR USE
3.0 PRODUCT INFORMATION
3.1 Integrated Pest Management (IPM)
3.2 Resistance Management
4.0 APPLICATION DIRECTIONS
4.1 Methods of Application
4.1.1 FOLIAR APPLICATION (INCLUDING AERIAL APPLICATION AND CHEMIGATION)
4.1.2 SOIL APPLICATION
4.2 Application Equipment
4.2.1 SHIELDED SPRAYERS
4.2.2 AIR-ASSISTED (AIR-BLAST) FIELD CROP SPRAYERS
4.2.3 SPRAY TANK CLEAN-OUT
4.3 Application Volume and Spray Coverage
4.4 Mixing Directions
4.4.1 ORONDIS ALONE
4.4.2 TANK-MIX PRECAUTIONS
4.4.3 TANK-MIX COMPATIBILITY
4.4.4 ORONDIS IN TANK MIXTURES
4.4.5 SPRAY ADDITIVES
4.5 Application through Irrigation Systems (Chemigation)
4.5.1 CHEMIGATION RESTRICTIONS
4.5.2 APPLICATION DIRECTIONS FOR IRRIGATION SYSTEMS
4.5.3 OPERATING INSTRUCTIONS FOR CHEMIGATION
4.5.4 SPECIFIC INSTRUCTIONS FOR PUBLIC WATER SYSTEMS
5.0 ROTATIONAL CROP RESTRICTIONS
6.0 RESTRICTIONS AND PRECAUTIONS
6.1 Use Restrictions
6.2 Spray Drift Management
6.3 Spray Drift Advisories
6.3.1 IMPORTANCE OF DROPLET SIZE
6.3.2 CONTROLLING DROPLET SIZE – GROUND BOOM

3

6.3.3 CONTROLLING DROPLET SIZE – AIRCRAFT
6.3.4 BOOM HEIGHT – GROUND BOOM
6.3.5 RELEASE HEIGHT – AIRCRAFT
6.3.6 SHIELDED SPRAYERS
6.3.7 TEMPERATURE AND HUMIDITY
6.3.8 TEMPERATURE INVERSIONS
6.3.9 WIND
6.3.10 BOOM-LESS GROUND APPLICATIONS
6.3.11 SENSITIVE AREAS
6.3.12 DRIFT CONTROL ADDITIVES
7.0 CROP USE DIRECTIONS
7.1 Basil, fresh and dried (field and greenhouse ONLY)
7.2 Blueberry, lowbush
7.3 Brassica Head and Stem Vegetables, Crop Group 5-16
7.4 Brassica Leafy Greens, Crop Subgroup 4-16B
7.5 Bulb Vegetables, Crop Group 3-07
7.6 Bushberry, Crop Subgroup 13-07B (except blueberry, lowbush)
7.7 Cacao
7.8 Caneberry, Crop Subgroup 13-07A
7.9 Citrus Fruit, Crop Group 10-10
7.10 Cucurbit Vegetables, Crop Group 9
7.11 Fruiting Vegetables, Crop Group 8-10
7.12 Ginseng
7.13 Hops
7.14 Leafy Greens, Crop Subgroup 4-16A
7.15 Low Growing Berry, Crop Subgroup 13-07G (except cranberry and blueberry, lowbush)
7.16 Peas, Succulent Shelled and Edible-Podded
7.17 Stalk and Stem Vegetables, Crop Subgroup 22A
7.18 Tobacco
7.19 Tree Nuts, Crop Group 14-12
7.20 Tropical and Subtropical Fruit, Medium to Large Fruit, Smooth, Inedible Peel, Crop
Subgroup 24B
7.21 Tuberous and Corm Vegetables, Crop Subgroup 1C
8.0 STORAGE AND DISPOSAL
9.0 CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY
10.0 APPENDIX
10.1 Orondis Use Summary Table [Optional Text]

4

1.0 FIRST AID
FIRST AID
Have the product container or label with you when calling a poison control center or
doctor, or going for treatment.
SYNGENTA HOTLINE NUMBER
For 24-Hour Medical Emergency Assistance (Human or Animal)
or Chemical Emergency Assistance (Spill, Leak, Fire or Accident)
Call
1-800-888-8372

PRECAUTIONARY STATEMENTS

2.0 PRECAUTIONARY STATEMENTS
2.1 Personal Protective Equipment (PPE)
Mixers, loaders, applicators, and other handlers must wear:
x Long-sleeved shirt
x Long pants
x Shoes and socks

2.2 User Safety Requirements
Follow the manufacturer's instructions for cleaning/maintaining PPE. If no such instructions
for washables exist, use detergent and hot water. Keep and wash PPE separately from
other laundry.

2.3 Engineering Controls
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the
requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides (40
CFR 170.240(d)(4-6)), the handler PPE requirements may be reduced or modified as
specified in the WPS.

5

2.4 User Safety Recommendations
User Safety Recommendations

Users should:
x Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet.
x Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly
and put on clean clothing.
x Remove PPE immediately after handling this product. Wash the outside of gloves
before removing. As soon as possible, wash thoroughly and change into clean
clothing.

2.5 Environmental Hazards
This product is toxic to aquatic invertebrates. For terrestrial uses: Do not apply directly to
water, to areas where surface water is present, or to intertidal areas below the mean high-
water mark. Do not contaminate water when disposing of equipment washwater or rinsate.

DIRECTIONS FOR USE
It is a violation of federal law to use this product in a manner inconsistent with its labeling.

Orondis must be used only in accordance with instructions on this label, in separately issued
labeling or exemptions under FIFRA (Supplemental Labels, Special Local Need
Registrations, FIFRA Section 18 Exemptions), or as otherwise permitted by FIFRA. Always
read the entire label, including the Conditions of Sale and Limitation of Warranty and Liability.

Do not apply this product in a way that will contact workers or other persons, either directly or
through drift. Only protected handlers may be in the area during application. For any
requirements specific to your state or tribe, consult the agency responsible for pesticide
regulation.

FAILURE TO FOLLOW DIRECTIONS AND PRECAUTIONS ON THIS LABEL MAY
RESULT IN CROP INJURY, POOR DISEASE CONTROL, OR ILLEGAL RESIDUES.

6

AGRICULTURAL USE REQUIREMENTS

Use this product only in accordance with its labeling and with the Worker Protection
Standard, 40 CFR Part 170. This Standard contains requirements for the protection of
agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of
agricultural pesticides. It contains requirements for training, decontamination,
notification, and emergency assistance. It also contains specific instructions and
exceptions pertaining to the statements on the label about personal protective
equipment (PPE), restricted-entry interval, and notification to workers (as applicable).
The requirements in this box only apply to uses of this product that are covered by the
Worker Protection Standard.

Do not enter or allow worker entry into treated areas during the restricted-entry
interval (REI) of 4 hours.

PPE required for early entry to treated areas that is permitted under the Worker
Protection Standard and that involves contact with anything that has been treated, such
as plants, soil, or water, is:
x Coveralls
x Shoes and socks
x Chemical resistant gloves (made of any waterproof material)

3.0 PRODUCT INFORMATION
Read all label directions before use. All applications must be made according to the use
directions that follow.

x Orondis is a suspension concentrate containing oxathiapiprolin and is for use by foliar or
soil application for the control or suppression of the diseases listed on this label.
x Orondis is active against selected Oomycete diseases listed on this label and has
preventive, residual, curative, eradicative, and anti-sporulant activity.
x Orondis is locally systemic, translaminar, and moves systemically in the xylem.
x See Section 7.0 for specific crop/disease directions.

MODE OF ACTION
Oxathiapiprolin, the active ingredient in Orondis, acts as an oxysterol-binding protein
modulator in fungal cells.

7


CROP TOLERANCE
Not all crops within a crop group, and not all varieties, cultivars, or hybrids of crops, have
been individually tested for crop safety. It is not possible to evaluate for crop safety all
applications of Orondis on all crops within a crop group, on all varieties, cultivars, or hybrids
of those crops, or under all environmental conditions and growing circumstances. To test
for crop safety, apply the product in accordance with the label instructions to a small area of
the target crop to ensure that a phytotoxic response will not occur, especially where the
application is a new use of the product by the applicator.

3.1 Integrated Pest Management (IPM)
Syngenta recommends the use of Integrated Pest Management (IPM) programs to control
pests. Orondis may be used as part of an IPM program which can include biological, cultural,
and genetic practices aimed at preventing economic pest damage. Application of this
product should be based on IPM principles and practices including field scouting or other
detection methods, correct target pest identification, population monitoring, and treating when
disease forecasting models reach locally determined action levels. Consult your state
cooperative extension service, professional consultants, or other qualified authorities to
determine the appropriate management, cultural practice, and treatment threshold levels for
the specific crop, geography, and diseases.
3.2 Resistance Management
Orondis contains the active ingredient oxathiapiprolin, which has been assigned Group 49 by
the Fungicide Resistance Action Committee (FRAC). Oxathiapiprolin inhibits an oxysterol-
binding protein (OSBP) homologue. Oxysterol-binding proteins are implicated in the
movement of lipids between membranes, among other processes. Inhibiting OSBP may
disrupt other processes in the fungal cell, such as signaling, maintaining cell membranes, and
the formation of more complex lipids that are essential for the cell to survive. Repeated use
of products for control of specific plant pathogens may lead to selection of resistant strains of
fungi and result in a reduction of disease control. A disease management program for
Orondis that includes rotation and tank mixing with fungicides with a different mode of action
is essential to reduce the risk of fungicide resistance development.

As part of a resistance management strategy:
x Do not tank-mix Orondis with any fungicide fo r which resistance to the target disease has
developed.
x Make no more than 2 sequential applications before rotating to a fungicide with a different
mode of action.
x Do not follow soil applications of Orondis or other oxathiapiprolin-containing products with
foliar applications of oxathiapiprolin-containing or any other FRAC 49-containing
products.
x Different application methods (foliar and soil) must not be combined when protecting a
crop during a growing season.

8

x Do not use Orondis or other oxathiapiprolin-containing products for more than 33% of the
total fungicide applications per season per crop.

To delay fungicide resistance, take one or more of the following steps:

x Rotate the use of oxathiapiprolin or other Group 49 fungicides within a growing season
sequence with different groups that control the same pathogens.
x Use tank mixtures with fungic ide(s) from a different group that are equally effective on the
target pest when such use is permitted. Use at least the minimum application rate labeled
by the manufacturer.
x Adopt an integrated disease management program for fungicide use that includes
scouting, uses historical information related to pesticide use and crop rotation, and which
considers host plant resistance, impact of environmental conditions on disease
development, disease thresholds, as well as cultural, biological, and other chemical
control practices.
x Where possible, make use of predictive di sease models to effectively time fungicide
applications. Note that using predictive models alone is not sufficient to manage
resistance.
x Monitor treated fungal populations for resistance development.
x Contact your local extension specialist or certified crop advisor for any additional
pesticide resistance-management and/or IPM recommendations for specific crops and
pathogens.
x For further information or to report sus pected resistance, contact Syngenta Crop
Protection at 1-866-796-4368. You can also contact your pesticide distributor or
university extension specialist to report resistance.

4.0 APPLICATION DIRECTIONS
4.1 Methods of Application
4.1.1 FOLIAR APPLICATION (INCLUDING AERIAL APPLICATION
AND CHEMIGATION)
See Section 7.0 for specific foliar application instructions and Section 4.5 for chemigation
instructions.

9

4.1.2 SOIL APPLICATION
x For suppression or control of soil borne diseases as specified in this label, Orondis must
be applied in a manner that ensures the product solution adequately saturates the target
crop root/crown zone.
x When applied to the root/crown zone before, during, or soon after sowing or
transplanting the crop, Orondis will suppress or control certain seedling root rot and
crown diseases that limit crop stand establishment.
x For soil application, apply Orondis using drip irrigation, micro-sprinkler irrigation,
transplant water application (water wheel or continuous stream transplanters), surface
band or directed application, or in-furrow application using the rates in the table below.
See Table 1 and Section 4.5 for chemigation instructions.
x If the application method does not move the product to the target root/crown disease
zone, the application must be followed with irrigation or cultivation to correctly place
the product for disease control.

Table 1: Soil application rates for Orondis /1,000 feet of row, based on plant row
spacing

Transplant Water Application
x Transplants should be adequately watered before transplanting. Ensure transplant water
volume is sufficient to thoroughly wet the root zone.
x See Table 1 for continuous-stream transplanters. Ensure 4-8 fl oz transplant water/
transplant depending on sandy (4 fl oz) vs silty soil (6-8 fl oz).
x For water-wheel transplanters, use the plant population to determine the rate of product
per plant.

Example:

19.2 fl oz product x acre = 0.0044 fl oz product
acre 4356 squash plants squash plant

Surface Band or Directed Application
x Apply in a 4- to 12-inch band. See Table 1 for rates.
x Follow application with cultivation or irrigation (1/2 - 1 inch) to move Orondis to the target
disease zone.

Orondis Conversion Chart for Drip (Trickle) or Micro-Sprinkler Chemigation,
Continuous Transplant Water, and Direct/Banded/In-Furrow Application
Corresponding
field rate
(fl oz/A)
Rate in fl oz product/1,000 row ft; based on planted row spacing (in inches) of:
30 34 36 48 60 72 84
2.4 0.14 0.16 0.17 0.22 0.28 0.33 0.39
4.8 0.28 0.31 0.33 0.44 0.55 0.66 0.77
9.6 0.55 0.62 0.66 0.88 1.10 1.32 1.54
19.2 1.10 1.25 1.32 1.76 2.20 2.65 3.09

10

Transplant Tray Application
x Apply as a foliar spray to the transplants in the transplant tray 24-48 hours prior to
transplanting. Immediately water the spray off the foliage into the transplant tray soil,
not watering past soil saturation.
x For this application, the acre of transplants receives the full prescribed acre rate for
transplant tray application, applied as a foliar spray, which is then washed into the
transplant cubes. Transplant cubes should be on the dry side at the beginning of this
treatment.

4.2 Application Equipment
4.2.1 SHIELDED SPRAYERS
x Shielding the boom or individual nozzles can reduce the effects of wind.
x It is the responsibility of the applicator to verify that the shie lds are minimizing drift
potential and not interfering with uniform deposition of the product.

4.2.2 AIR-ASSISTED (AIR-BLAST) FIELD CROP SPRAYERS
x Air-assisted field crop sprayers carry droplets to the target via a downward directed air
stream. Some may reduce the potential for drift, but if a sprayer is unsuitable for the
application and/or set up improperly, high drift potential can result.
x It is the responsibility of the applicator to determine that a sprayer is suitable for the
intended application, that it is configured properly, and that drift potential has been
minimized.
x Note: Air-assisted field sprayers can affect product performance by affecting spray
coverage and canopy penetration. Read the specific crop use and application
equipment instructions to determine if an air-assisted field crop sprayer can be used.

4.2.3 SPRAY TANK CLEAN-OUT
x Prior to application, start with clean, well-maintained application equipment.
x Immediately following application, thoroughly clean all spray equipment to reduce the
risk of forming hardened deposits which might become difficult to remove.
x Drain application equipment. Thoroughly rinse and flush all application equipment with
clean water.
x Take all necessary safety precautions when cleaning equipment. Do not clean near wells,
water sources, or desirable vegetation. Dispose of waste rinse water in accordance with
local regulations.

4.3 Application Volume and Spray Coverage
See Sections 4.1 and 7.0 for application volume information.

x Thorough coverage is necessary to provide good disease control.
x Make no more spray solution than is needed for application.
x Avoid spray overlap, as crop injury may occur.

11

x For air-assisted ground applications, apply in a minimum of 10 gallons of water per acre
unless specified otherwise.
x For aerial applications, apply in a minimum of 2 gallons of water per acre unless specified
otherwise.
x For ground applications, apply in a minimu m of 15 gallons of water per acre unless
specified otherwise. Increase the spray volume as the plants mature to ensure thorough
coverage of the foliage.

4.4 Mixing Directions
4.4.1 ORONDIS ALONE
1. Add ½- ⅔ of the required amount of water to the spray or mixing tank.
2. With the agitator running, add Orondis to the tank.
3. Continue agitation while adding the remainder of the water.
4. Begin application of the spray solution after Orondis has completely dispersed into the mix
water.
5. Maintain agitation until all of the mixture has been sprayed.

4.4.2 TANK-MIX PRECAUTIONS
x The crop safety of all tank mixtures with Orondis, which may include physically compatible
pesticides, fertilizers, adjuvants, and/or additives, has not been tested.
x When using a tank mixture with Orondis, it is important to understand crop safety.
x To test for crop safety: prepare a small volume of the intended tank mixture, apply it to an
area of the target crop as directed by both this label and the tank-mix partner product
labels, and observe the treated crop to ensure that a phytotoxic response does not occur.
x Some materials including oils, surfactants, adjuvants, and pesticide formulations when
applied individually, sequentially, or in tank mixtures may solubilize the plant cuticle,
facilitate penetration into plant tissue, and increase potential for crop injury.
x It is the pesticide user’s responsibility to ensure that all products are registered for the
intended use. Read and follow the applicable restrictions, limitations, and directions for
use on all product labels involved in tank mixing. Users must follow the most restrictive
directions for use and precautionary statements of each product in the tank mixture.

4.4.3 TANK-MIX COMPATIBILITY
Orondis is physically compatible with many commonly used fungicides, herbicides,
insecticides, biological control products, liquid fertilizers, non-ionic surfactants, crop oils,
methylated seed oils, and drift control additives. However, since the formulations of products
change, it is important to test the physical compatibility of desired tank mixes and check for
undesirable physical effects, including settling out or flocculation.

A jar compatibility test is recommended prior to tank mixing with other pesticides and/or
adjuvants/additives in order to ensure the compatibility of Orondis with other tank-mixed
pesticide, adjuvant, or fertilizer partners. The recommended procedure for conducting tank-
mix compatibility tests is as follows:

12


Compatibility Test: Since pesticides, adjuvants, and fertilizers can vary in quality, always
check tank-mix compatibility with tank-mixed partners each time before use. Be
especially careful when using complete suspension or fluid fertilizers as carriers, as
serious compatibility problems are more likely to occur with these products. Commercial
application equipment may improve tank-mix compatibility in some instances. The following
test assumes a spray volume of 25 gallons/A. For other spray volumes, make appropriate
changes in the components. Check tank-mix compatibility using this procedure:

1. Add 1 pt of carrier (either the water or liquid fertilizer to be used in the spray operation) to
each of two clear 1-qt jars with tight lids.
2. To one of the jars, add ¼ teaspoon or 1.2 mL of a commercially available tank-mix
compatibility agent approved for this use (¼ teaspoon is equivalent to 2 pt/100 gallons of
spray). Invert the jar, then shake or stir gently to ensure thorough mixing.
3. To both jars, add the appropriate amount of each tank-mix partner. If more than one
tank-mix partner is to be used, add them separately with dry formulations (wettable
powders or water dispersible granules) first, followed by liquid flowables, capsule
suspensions, emulsifiable concentrates, and finally adjuvants. After each addition, invert
the jar, then shake or stir gently to thoroughly mix. The appropriate amount of each tank-
mix partner for this test is as follows:
Dry formulations: For each pound to be applied per acre, add 1.5 level teaspoons to
each jar.
Liquid formulations: For each pint to be applied per acre, add 1/2 teaspoon or 2.5 mL
to each jar.
4. After adding all ingredients, put lids on and tighten, then invert each jar 10 times to fully
mix. Let the mixtures stand for 15-30 minutes and then assess by looking for separation,
large flakes, precipitates, gels, heavy oily film on the jar, or other signs of
incompatibility. Determine if a compatibility agent is needed in the spray mixture by
comparing the two jars. If either mixture separates, but can be remixed readily, the
mixture can be sprayed as long as good agitation is used. If the mixtures are
incompatible, test the following methods of improving compatibility: (A) slurry dry
formulations in water before addition, or (B) add the compatibility agent directly into liquid
formulations before addition to the tank-mixture. If these procedures are followed but
incompatibility is still observed, do not use the tank-mixture.

13

4.4.4 ORONDIS IN TANK MIXTURES
x Always follow the tank-mix instructions of the most restrictive product label.
x Apply at least the minimum labeled rate of each fungicide in the tank-mix.
x Consult a Syngenta representative or local agricultural authorities for more information
concerning tank mixtures.
x When using a tank-mix, add different formulation types in the sequence indicated below.
Allow time for complete mixing and dispersion after addition of each product.
1. Water-soluble bag (WSB)
2. Water-soluble granules (SG)
3. Water-dispersible granules (WG)
4. Wettable powders (WP)
5. Water-based suspension concentrates (SC) (Orondis)
6. Capsule suspension (CS)
7. Suspo-emulsion (SE)
8. Oil dispersion (OD)
9. Emulsion in water (EW)
10. Emulsifiable concentrates (EC)
11. Water-soluble concentrates (SL)
12. Adjuvants, surfactants, oils
13. Soluble fertilizers
14. Drift retardants

4.4.5 SPRAY ADDITIVES
x Orondis may be used with adjuvants (i.e., non-ionic surfactants, organosilicone
surfactants, crop oils, methylated seed oils, and blends) at typical agricultural use rates
for these adjuvants.
x When an adjuvant is to be used with this product, the use of an adjuvant that meets the
standards of the Council of Producers & Distributors of Agrotechnology (CPDA)
adjuvant certification is recommended.

4.5 Application through Irrigation Systems (Chemigation)
4.5.1 CHEMIGATION RESTRICTIONS
x Apply Orondis only through drip (trickle), strip tubing, or sprinkler irrigation systems (such
as center-pivot, lateral-move, end-tow, side (wheel) roll, traveler, big-gun, solid-set, or
hand-move irrigation systems).
x Do not connect any irrigation system (including greenhouse systems) used for pesticide
applications to a public water system unless the pesticide label-prescribed safety devices
for public water systems (Section 4.5.4) are in place. Public water system means a
system for the provision to the public of piped water for human consumption, if such
system has at least 15 service connections or regularly serves an average of at least 25
individuals at least 60 days out of the year.
x The irrigation system used for application of Orondis must provide for uniform distribution
of Orondis-treated water. Crop injury, lack of effectiveness, or illegal pesticide residues
in the crop can result from non-uniform distribution of treated water.

14

x The system must contain a functional check valve, vacuum relief valve, and low-pressure
drain appropriately located on the irrigation pipeline to prevent water source
contamination from backflow.

4.5.2 APPLICATION DIRECTIONS FOR IRRIGATION SYSTEMS
x Preparation: A pesticide tank is recommended for the application of Orondis in
chemigation systems. Thoroughly clean the injection system and tank of any fertilizer or
chemical residues using a standard clean-out procedure. Dispose of any residues in
accordance with state and federal laws. With the mix tank 1/4 to 1/2 full with water and
the agitator running, measure the required amount of Orondis and add it to the tank.
Then add additional water to bring your total pesticide mixture up to the desired volume
for your application. Note: Always add the Orondis to water; never put Orondis into a dry
tank or other mixing equipment without first adding water. See Section 4.4.4 for tank-
mixing sequence. Continue to agitate the mixture throughout the application process.
Good agitation is required in the injection tank. Use mechanical or hydraulic agitation; do
not use air agitation.
x Injection into Chemigation Systems: Inject the proper amount of Orondis into the
irrigation water flow using a positive displacement injection pump or a Venturi injector.
Injection should occur at a point in the main irrigation water flow to ensure thorough
mixing with the irrigation water.
o In moving systems, apply specified dosage of Orondis as a continuous injection. In
non-moving systems, inject Orondis for 15 to 30 minutes at end of cycle. Use the least
amount of water possible consistent with uniform coverage.
o Mix the amount of Orondis needed for acreage to be treated into the quantity of water
determined during prior calibration. For moving systems, inject into the system
continuously for one complete revolution of the field. For non-moving systems, inject
into system for the time established during calibration.
x Uniform Water Distribution: Non-uniform distribution can result in crop injury, lack of
effectiveness, or illegal pesticide residues in or on the crop being treated. Ensure the
chemigation system is operating properly to uniformly distribute the chemigation
application to the crop. Contact the equipment manufacturer, the local university
extension agent, or other experts if you have questions about achieving uniform
distribution of the application.
x Monitoring of Chemigation Applications: A person knowledgeable of the chemigation
system and responsible for its operation, or under the supervision of a responsible
person, shall shut the system down and make necessary adjustments should the need
arise. Wear the personal protective equipment as defined in the PPE section of the label
for applicators and other handlers when making adjustments or repairs on the
chemigation system when Orondis is in the irrigation water.
x Operation: Start the water pump and let the system achieve the desired pressure before
starting the injector. Start the injector. Stop injection equipment after treatment is
completed and continue to operate irrigation equipment until all Orondis is flushed from
system.
x Cleaning the System: Thoroughly clean the injection system and tank of any fertilizer or
chemical residues using a standard clean-out procedure. Dispose of any residues in
accordance with state and federal laws. Consult your owner’s manual or your local
equipment dealer for clean-out procedures for your injection system.

15


Drip (Trickle) Irrigation Instructions
x Orondis must be applied in a manner that ensures the product is in the root zone.
x Orondis must be in the root zone to provide effective control of target pests.
x Orondis is most effective when it is applied so that the roots are at or near the site of
application; manage irrigation so that significant quantities of Orondis remain in the root
zone.
x Do not begin applications until after crop emergence in direct-seeded crops.
x Do not make applications if soil moisture is below the level required for active plant
growth.
x This product must be applied uniformly in the root zone or poor performance may result.
Drip tape or emitters must be located within or directly adjacent to the root zone.
x Orondis must not be applied at the same time that a drip irrigation line clean-out product is
being used as performance may be reduced.
x The drip system must be properly designed, free of leaks, and operated in a manner that
provides uniform application of water throughout the field.
x In most situations, this product should be applied during the first 1/3 of the irrigation cycle,
starting just after the system has come up to pressure.
x The minimum injection period is the time that it takes water to move from the injection
point to the farthest emitter in the irrigation zone (propagation time). If this time is not
known, it can be calculated by measuring the time required for a soluble dye to move from
the injection point to the farthest emitter. A longer injection period improves uniformity
throughout the zone but requires at least an equal period for water to flush the system and
move the product through the soil.

16

4.5.3 OPERATING INSTRUCTIONS FOR CHEMIGATION
1. The system must contain a functional check va lve, vacuum relief valve, and low pressure
drain appropriately located on the irrigation pipeline to prevent water source
contamination from backflow.
2. The pesticide injection pipeline must cont ain a functional, automatic, quick-closing check
valve to prevent the flow of fluid back toward the injection pump.
3. The pesticide injection pipeline must also contain a functional, normally closed, solenoid-
operated valve located on the intake side of the injection pump and connected to the
system interlock to prevent fluid from being withdrawn from the supply tank when the
irrigation system is either automatically or manually shut down.
4. The system must contain functional interlock ing controls to automatically shut off the
pesticide injection pump when the water pump motor stops.
5. The irrigation line or water pump must includ e a functional pressure switch which will stop
the water pump motor when the water pressure decreases to the point where pesticide
distribution is adversely affected.
6. Systems must use a metering pump, such as a positive displacement injection pump
(e.g., diaphragm pump), effectively designed and constructed of materials that are
compatible with pesticides and capable of being fitted with a system interlock.
7. Do not apply when wind speed favors drift beyond the area intended for treatment.

4.5.4 SPECIFIC INSTRUCTIONS FOR PUBLIC WATER SYSTEMS
1. Public water system means a system for the provision to the public of piped water for
human consumption if such system has at least 15 service connections or regularly
serves an average of at least 25 individuals daily at least 60 days out of the year.
2. Chemigation systems connected to publ ic water systems must contain a functional,
reduced pressure zone (RPZ) backflow preventer or the functional equivalent in the
water supply line upstream from the point of pesticide introduction. As an option to the
RPZ backflow preventer, discharge the water from the public water system into a
reservoir tank prior to pesticide introduction. There shall be a complete physical break
(air gap) between the outlet end of the fill pipe and the top or overflow rim of the reservoir
tank of at least twice the inside diameter of the fill pipe.
3. The pesticide injection pipeline must contai n a functional, automatic, quick-closing check
valve to prevent the flow of fluid back toward the injection pump.
4. The pesticide injection pipeline must contain a functional, normally closed, solenoid-
operated valve located on the intake side of the injection pump and connected to the
system interlock to prevent fluid from being withdrawn from the supply tank when the
irrigation system is either automatically or manually shut down.
5. The system must contain functional interlock ing controls to automatically shut off the
pesticide injection pump when the water pump motor stops, or, in cases where there is
no water pump, when the water pressure decreases to the point where pesticide
distribution is adversely affected.
6. Systems must use a metering device, such as a positive displacement injection pump
(e.g., diaphragm pump), effectively designed and constructed of materials that are
compatible with pesticides and capable of being fitted with a system interlock.
7. Do not apply when wind speed favors drift beyond the area intended for treatment.

17

5.0 ROTATIONAL CROP RESTRICTIONS
The following crops may be planted at the specified interval following application of Orondis.
Crop, Crop Group, or Crop Subgroup Plant-back Interval
Basil (fresh and dried)
Blueberry, lowbush
Brassica Leafy Greens (Crop Subgroup 4-16B)
Brassica, Head and Stem Vegetables (Crop Group 5-16)
Bulb Vegetables (Crop Group 3-07)
Bushberry (Crop Subgroup 13-07B)
Cacao
Caneberry (Crop Subgroup 13-07A)
Citrus (Crop Group 10-10)
Cucurbit Vegetables (Crop Group 9)
Fruiting Vegetables (Crop Group 8-10)
Ginseng
Hops
Leafy Greens (Crop Subgroup 4-16A)
Low Growing Berry (Crop Subgroup 13-07G, except
cranberry)

Oilseed (Crop Group 20)
Peas, Edible-Podded
Peas, Succulent Shelled
Stalk and Stem Vegetables (Crop Subgroup 22A)
Tobacco
Tree Nuts (Crop Group 14-12)
Tropical and Subtropical Fruit, Medium to Large,
Smooth, Inedible Peel (Crop Subgroup 24B)
Tuberous and Corm Vegetables (Crop Subgroup 1C)
0 days
Cereals (Crop Groups 15,16)
Grass Animal Feeds (Crop Group 17)
Peanuts
Sugarcane
30 days
Herbs and Spices (Crop Group 19, except Basil)
Legume Vegetables, except succulent shelled and
edible-podded peas
Nongrass Animal Feeds (Crop Group 18)

180 days
All other crops not listed 180 days

18


6.0 RESTRICTIONS AND PRECAUTIONS
See Section 7.0 for crop-specific restrictions and precautions.

6.1 Use Restrictions
x Different application methods (foliar and soil) must not be combined when protecting a
crop during a growing season.
x Use this product only in commercial and farm plantings.
x DO NOT use for home plantings.
x Orondis is NOT for use in greenhouses unless otherwise specified in the specific crop
directions for use table.
x DO NOT formulate this product into other end-use products.

6.2 Spray Drift Management
x The interaction of many equipment- and weather-related factors determines the
potential for spray drift. The applicator is responsible for considering all these factors
when making application decisions.
x To avoid spray drift, do not apply when conditions favor drift beyond the target area.
x Avoid spray overlap, as injury may occur.


6.3 Spray Drift Advisories
x THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT.
x BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL
CONDITIONS.

6.3.1 IMPORTANCE OF DROPLET SIZE
x An effective way to reduce spray drift is to apply large droplets. Use the largest droplets
that provide target pest control.
x While applying larger droplets will reduce spray drift, the potential for drift will be greater if
applications are made improperly or under unfavorable environmental conditions.
x The presence of sensitive species nearby, the environmental conditions, and pest
pressure may affect how an applicator balances drift control and coverage.
x A droplet size classification system describes the range of droplet sizes produced by
spray nozzles. The American Society of Agricultural and Biological Engineers (ASABE)
provides a standard that describes droplet size spectrum categories defined by a number
of reference nozzles (fine, coarse, etc.). Droplet spectra resulting from the use of a
specific nozzle may also be described in terms of volume mean diameter (VMD).
Coarser droplet size spectra have larger VMD’s and lower drift potential.

19


6.3.2 CONTROLLING DROPLET SIZE – GROUND BOOM
x Volume- Increasing the spray volume so that larger droplets are produced will reduce
spray drift. Use the highest practical spray volume for the application. If a greater
spray volume is needed, consider using a nozzle with a higher flow rate.
x Pressure- Use the lowest spray pressure recommended for the nozzle to produce the
target spray volume and droplet size.
x Spray Nozzle- Use a spray nozzle that is designed for the intended application.
Consider using nozzles designed to reduce drift.

6.3.3 CONTROLLING DROPLET SIZE – AIRCRAFT
x Adjust Nozzles- Follow nozzle manufacturers recommendations for setting up
nozzles. Generally, to reduce fine droplets, nozzles should be oriented parallel with the
airflow in flight.

6.3.4 BOOM HEIGHT – GROUND BOOM
x Use the lowest boom height that is compatib le with the spray nozzles that will provide
uniform coverage.
x For ground equipment, the boom should re main level with the crop and have minimal
bounce.

6.3.5 RELEASE HEIGHT – AIRCRAFT
x Higher release heights increase th e potential for spray drift.
x When applying aerially to crops, DO NOT release spray at a height greater than 10 ft
above the crop canopy, unless a greater application height is necessary for pilot
safety.

6.3.6 SHIELDED SPRAYERS
x Shielding the boom or individual nozzles can reduce spray drift. Consider using
shielded sprayers.
x Verify that the shields are not interfering with the uniform deposition of the spray on
the target area.

6.3.7 TEMPERATURE AND HUMIDITY
x When making applications in hot and dry conditions, use larger droplets to reduce
effects of evaporation.

6.3.8 TEMPERATURE INVERSIONS
x Drift potential is high during a temperature inversion.
x Temperature inversions are characterized by increasing temperature with altitude and
are common on nights with limited cloud cover and light to no wind.
x The presence of an inversion can be indicated by ground fog or by the movement of
smoke from a ground source or an aircraft smoke generator.

20

x Smoke that layers and moves laterally in a concentrated cloud (under low wind
conditions) indicates an inversion, while smoke that moves upward and rapidly
dissipates indicates good vertical air mixing.
x Avoid applications during temperature inversions.

6.3.9 WIND
x Drift potential generally increases with wind speed.
x AVOID APPLICATIONS DURING GUSTY WIND CONDITIONS.
x Applicators need to be familiar with loca l wind patterns and terrain that could affect
spray drift.

6.3.10 BOOM-LESS GROUND APPLICATIONS
x Setting nozzles at the lowest effective height will help to reduce the potential for spray
drift.
x Handheld Technology Applications: Take precautions to minimize spray drift.


6.3.11 SENSITIVE AREAS
x Making applications when there is a sustai ned wind moving away from adjacent sensitive
areas (e.g., residential areas, bodies of water, known habitat for threatened or
endangered species, non-target crops) is an effective way to minimize the effect of spray
drift.

6.3.12 DRIFT CONTROL ADDITIVES
x Using product-compatible drift control additives can reduce drift potential.
x When a drift control additive is used, read and carefully observe cautionary statements
and all other information on the additive’s label.
x If using an additive that increases viscosity, ensure that the nozzles and other application
equipment will function properly with a viscous spray solution.
x Preferred drift control additives have been certified by the Council of Producers and
Distributors of Agrotechnology.

21


7.0 CROP USE DIRECTIONS
7.1 Basil, fresh and dried (field and greenhouse ONLY)
Crops (including all cultivars, varieties, and/or hybrids of these)
Basil (fresh and dried)
Target Disease
Rate
fl oz/A
(lb ai/A) Application Timing Use Directions
Downy mildew
(Peronospora
belbahrii)
1.0 – 2.4
(0.01 -
0.03)
Begin applications prior to
disease development and
continue on a 5- to 10-day
interval.
Apply as a foliar application by ground only.
Resistance Management:
x Refer to Section 3.2.
x Make no more than 2 sequential applications of Orondis (or any other FRAC 49-containing product)
before rotating to a fungicide with a different mode of action.
x Where 3 or more applications are made, use Orondis (or any other FRAC 49- containing product) in no
more than 33% of the applications, or a maximum of 4 applications, whichever is fewer. Where less than
3 fungicide applications are made, make no more than 1 application of Orondis (or any other FRAC 49-
containing product).
x On multiple plantings in the same year, do not exceed 6 applications per acre per year.
USE RESTRICTIONS
1) Refer to Section 6.1 for additional product use restrictions.
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed in the table for this
application type.
3) Maximum Number of Applications per year: DO NOT make more than 4 applications at the maximum
rate per year.
4) Minimum Application Interval: 5 days
5) Maximum Annual Rate: 9.6 fl oz/A/year (0.12 lb ai/A/year)
a. DO NOT exceed 0.12 lb ai/A/year of oxathiapiprolin-containing products.
6) DO NOT use in nursery production of transplanted crops.
7) Pre-harvest Interval (PHI): 0 days

22

7.2 Blueberry, lowbush
Crops (including all cultivars, varieties, and/or hybrids of these)
Blueberry, lowbush [Not for use in California]
Target
Diseases
Rate
fl oz/A
(lb ai/A)
Application Timing Use Directions
Phytophthora
root rot
(Phytophthora
spp.)
4.8 – 11
(0.06 -
0.14)
Soil Application:
For New Plantings, make a
single soil application at
planting. A second application
may be made 7-14 days later if
needed.

For Established Plantings,
make a single soil application
as soon as plants begin
growing in the spring. A
second application may be
made 7-14 days later if
needed.
Apply as a soil drench or soil directed
spray, or through irrigation water
(micro-sprinkler or drip).

For effective disease control, ensure
that the product solution thoroughly
wets the target root zone. If the
application method does not move
the product to the root zone, and rain
is not imminent, then follow with
irrigation.


See Section 4.5 for drip irrigation
instructions.

Use the higher rate in fields with a
history of Phytophthora disease.
Resistance Management:
x Refer to Section 3.2.
x Make no more than 2 sequential applications of Orondis (or any other FRAC 49-containing
product) before rotating to a fungicide with a different mode of action.
USE RESTRICTIONS
1) Refer to Section 6.1 for additional product use restrictions.
2) Maximum Single Application Rate:
a. Soil Applications: DO NOT exceed the maximum rate listed in the table for this application
type.
3) Maximum Number of Applications per Year:
a. Soil Applications: DO NOT make more than 2 applications at the maximum rate per year.
4) Minimum Application Interval: 7 days
5) Maximum Annual Rate:
a. Soil Applications: 22 fl oz/A/year (0.29 lb ai/A/year)
i) DO NOT apply more than 0.29 lb ai/A/year of soil-applied oxathiapiprolin-containing
products.
6) DO NOT use in nursery production of transplanted crops.
7) Pre-harvest Interval (PHI):
a. Soil Applications: 0 days

23


7.3 Brassica Head and Stem Vegetables, Crop Group 5-16
Crops (including all cultivars, varieties, and/or hybrids of these)
Broccoli
Brussels sprouts
Cabbage
Cabbage, Chinese, Napa
Cauliflower
Target Disease
Rate
fl oz/A
(lb ai/A)
Application
Timing Use Directions
Downy mildew
(Peronospora
parasitica)
1.0 – 2.4
(0.01 -
0.03)
Begin applications
prior to disease
development and
continue on a 5- to
10-day interval.
Apply as a foliar application by ground, air-assisted
(air blast), or aerial application.

Use a higher rate when disease is present, for longer
application intervals, or for susceptible varieties.


Resistance Management:
x Refer to Section 3.2.
x Make no more than 2 sequential applications of Orondis (or any other FRAC 49-containing product)
before rotating to a fungicide with a different mode of action.
x Where 3 or more applications are made, use Orondis (or other oxathiapiprolin-containing product) in no
more than 33% of the applications, or a maximum of 4 applications, whichever is fewer. Where less than
3 fungicide applications are made, make no more than 1 application of Orondis (or any other FRAC 49-
containing product).
x On multiple plantings in the same year, do not exceed 6 applications per acre per year.
USE RESTRICTIONS
1) Refer to Section 6.1 for additional product use restrictions.
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed in the table for this
application type.
3) Maximum Number of Applications per Year: DO NOT make more than 4 applications at the maximum
rate per year.
4) Minimum Application Interval: 5 days
5) Maximum Annual Rate: 9.6 fl oz/A/year (0.12 lb ai/A/year)
a. DO NOT exceed 0.12 lb ai/A/year of oxathiapiprolin-containing products.
6) DO NOT use in nursery production of transplanted crops.
7) Pre-harvest Interval (PHI): 0 days

24


7.4 Brassica Leafy Greens, Crop Subgroup 4-16B
Crops (including all cultivars, varieties, and/or hybrids of these)
Arugula
Broccoli raab
Broccoli, Chinese
Cabbage, Abyssinian
Cabbage, seakale
Chinese cabbage (bok choy)
Collards
Cress, garden
Cress, upland
Hanover salad
Kale
Maca, leaves
Mizuna
Mustard greens
Radish, leaves
Rape greens
Rocket, wild
Shepherd’s purse
Turnip greens
Watercress
Target Disease
Rate
fl oz/A
(lb ai/A) Application Timing Use Directions
Downy mildew
(Peronospora
parasitica)
1.0 – 2.4
(0.01 - 0.03)
Begin applications prior
to disease development
and continue on a 5- to
10-day interval.
Apply as a foliar application by ground
only.

A non-ionic surfactant, modified seed oil,
spreader sticker, or crop oil concentrate
may be added at a rate specified by the
adjuvant label.

For Watercress application, production
fields must be drained of water at least
24 hours prior to application, and water
must not be reapplied to the field for a
minimum of 24 hours following the
application and each reapplication.
Resistance Management:
x Refer to Section 3.2.
x Make no more than 2 sequential applications of Orondis (or any other FRAC 49-containing product)
before rotating to a fungicide with a different mode of action.
x Where 3 or more applications are made, use Orondis (or any other FRAC 49-containing product) in no
more than 33% of the applications, or a maximum of 4 applications, whichever is fewer. Where less than
3 fungicide applications are made, make no more than 1 application of Orondis (or any other FRAC 49-
containing product).
x On multiple plantings in the same year, do not exceed 6 applications per acre per year.
USE RESTRICTIONS
1) Refer Section 6.1 for additional product use restrictions.
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed in the table for this
application type.
3) Maximum Number of Applications per Year: DO NOT make more than 4 applications at the maximum
rate per year.
4) Minimum Application Interval: 5 days
5) Maximum Annual Rate: 9.6 fl oz/A/year (0.12 lb ai/A/year)
a. DO NOT exceed 0.12 lb ai/A/year of oxathiapiprolin-containing products.
6) DO NOT use in nursery production of transplanted crops.
7) Pre-harvest Interval (PHI): 0 days

25

7.5 Bulb Vegetables, Crop Group 3-07
Crops (including all cultivars, varieties, and/or hybrids of these)
Chive, fresh leaves
Chive, Chinese, fresh leaves
Daylily, bulb
Elegans hosta
Fritillaria, bulb
Fritillaria, leaves
Garlic, bulb
Garlic, great-headed, bulb
Garlic, serpent, bulb
Kurrat
Lady’s leek
Leek
Leek, wild
Lily, bulb
Onion, Beltsville bunching
Onion, bulb
Onion, Chinese, bulb
Onion, fresh
Onion, green
Onion, macrostem
Onion, pearl
Onion, potato, bulb
Onion, tree, tops
Onion, Welsh, tops
Shallot, bulb
Shallot, fresh leaves
Target Disease
Rate
fl oz/A
(lb ai/A) Application Timing Use Directions
Downy mildew
(Peronospora
destructor)
1.0 – 2.4
(0.01 -
0.03)
Begin applications prior
to disease development
and continue on a 5- to
10-day interval.
Apply as a foliar application by ground, air-
assisted (air blast), or aerial application.

Use a higher rate when disease is present, for
longer application intervals, or for susceptible
varieties.


Resistance Management:
x Refer to Section 3.2.
x Make no more than 2 sequential applications of Orondis (or any other FRAC 49-containing product)
before rotating to a fungicide with a different mode of action.
x Where 3 or more applications are made, use Orondis (or any other FRAC 49- containing product) in no
more than 33% of the applications, or a maximum of 4 applications, whichever is fewer. Where less than
3 fungicide applications are made, make no more than 1 application of Orondis (or any other FRAC 49-
containing product).
x On multiple plantings in the same year, do not exceed 6 applications per acre per year.
USE RESTRICTIONS
1) Refer to Section 6.1 for additional product use restrictions.
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed in the table for this
application type.
3) Maximum Number of Applications per Year: DO NOT make more than 4 applications at the maximum
rate per year.
4) Minimum Application Interval: 5 days
5) Maximum Annual Rate: 9.6 fl oz/A/year (0.12 lb ai/A/year)
a. DO NOT exceed 0.12 lb ai/A/year of oxathiapiprolin-containing products.
6) DO NOT use in nursery production of transplanted crops.
7) Pre-harvest Interval (PHI): 0 days

26

7.6 Bushberry, Crop Subgroup 13-07B (except blueberry, lowbush)
Crops (including all cultivars, varieties, and/or hybrids of these)
Aronia berry
Blueberry, highbush
Buffalo currant
Chilean guava
Currant, black
Currant, red
Elderberry
European barberry
Gooseberry
Highbush cranberry
Honeysuckle, edible
Huckleberry
Jostaberry
Juneberry (Saskatoon Berry)
Lingonberry
Native currant
Salal
Sea buckthorn
Target Disease
Rate
fl oz/A
(lb ai/A) Application Timing Use Directions
Phytophthora root
rot
(Phytophthora
spp.)
4.8 – 19.2
(0.06 -
0.25)
New Plantings: Make the
first application at planting.
Make a second application
a minimum of 7-30* days
later, coinciding with a
period favorable for root rot
development.

Established Plantings:
Make the first application
before plants start to grow in
the spring. Make a second
application a minimum of 7-
30* days later, coinciding
with a period favorable for
root rot development.

*Although the minimum
required number of days
before retreatment is 7,
waiting 30 days is
recommended.
Apply as a soil drench or soil directed
spray, or through irrigation water (micro-
sprinkler, drip, or flood).

For effective disease control, ensure that
the product solution thoroughly wets the
target root zone. If the application method
does not move the product to the root
zone, and rain is not imminent, then follow
with irrigation.

See Section 4.1.2 for at-planting, or
transplant water instructions. See
Section 4.5 for drip irrigation instructions.

Use a higher rate in fields with a history of
Phytophthora disease. Orondis will not
revitalize plants showing moderate to
severe root rot symptoms.

Use Orondis in conjunction with good
cultural practices to manage diseases.
Resistance Management:
x Refer to Section 3.2.
x Make no more than 2 sequential applications of Orondis (or any other FRAC 49-containing product)
before rotating to a fungicide with a different mode of action.
USE RESTRICTIONS
1) Refer to Section 6.1 for additional product use restrictions.
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed in the table for this
application type.
3) Maximum Number of Applications per Year: DO NOT make more than 2 applications at the maximum
rate per year.
4) Minimum Application Interval: 7 days
5) Maximum Annual Rate: 38.6 fl oz/A/year (0.50 lb ai/A/year)
a. DO NOT apply more than 0.50 lb ai/A/year of soil-applied oxathiapiprolin-containing products.
6) DO NOT use in nursery production of transplanted crops.
7) Pre-harvest Interval (PHI): 1 day

27

7.7 Cacao
Crops (including all cultivars, varieties, and/or hybrids of these)
Cacao
Target Disease
Rate
fl oz/A
(lb ai/A) Application Timing Use Directions
Black pod rot
(Phytophthora
spp.)
2.4 – 9.6
(0.03 - 0.12)
Soil Application-
Resets or New
Plantings: Make the
first application at
planting and up to one
additional application
approximately 3 to 6
months later, coinciding
with a root growth flush.

Apply as a soil spray around the base of
the tree to the zone of maximum root
density, or through irrigation water (micro-
sprinkler or drip). See Section 4.1.2.

For effective disease control, ensure that
the product solution thoroughly wets the
target root zone. If the application method
does not move the product to the root
zone, and rain is not imminent, then follow
with irrigation.
Soil Application-
Established Plantings:
Make two applications at
a 3- to 6-month interval,
coinciding with root
growth flush.
Apply as a soil spray beneath the tree
canopy or through irrigation water (micro-
sprinkler or drip). See Section 4.1.2.

For effective disease control, ensure that
the product solution thoroughly wets the
target root zone. If the application method
does not move the product to the root
zone, and rain is not imminent, then follow
with irrigation.
1.2 – 2.4
(0.02 - 0.03)
Foliar/Fruit Application:
Make a single application
to fruit before initial signs
of black pod rot appear.

For post-harvest control
of black pod rot, apply 0-
1 day before harvest.
Apply in sufficient volume to provide
uniform and complete coverage of fruit.
Resistance Management:
x Refer to Section 3.2.
x Make no more than 2 sequential applications of Orondis (or any other FRAC 49-containing product)
before rotating to a fungicide with a different mode of action.
x DO NOT follow soil applications of Orondis with foliar applications of Orondis (or any other FRAC 49-
containing products). Use either soil applications or foliar applications but not both for disease control.
USE RESTRICTIONS
1) Refer to Section 6.1 for additional product use restrictions.
2) Maximum Single Application Rate:
a. Soil Application: DO NOT exceed the maximum rate listed in the table for this application type.
b. Foliar/Fruit Application: DO NOT exceed the maximum rate listed in the table for this application
type.
3) Maximum Number of Applications per Year:
a. Soil applications: DO NOT make more than 2 applications per year.
b. Foliar/Fruit Application: DO NOT make more than 1 application per year.
4) Minimum Application Interval: 90 days

28

5) Maximum Annual Rate:
a. Soil Application: 19.2 fl oz/A/year (0.25 lb ai/A/year)
i) DO NOT exceed 0.25 lb ai/A/year of oxathiapiprolin-containing products with soil application.
b. Foliar/Fruit Application: 2.4 fl oz/A/year (0.03 lb ai/A/year)
i) DO NOT exceed 0.03 lb ai/A/year of oxathiapiprolin-containing products with fruit/foliar
application.
6) DO NOT use in nursery production of transplanted crops.
7) Pre-harvest Interval (PHI): 0 days

7.8 Caneberry, Crop Subgroup 13-07A
Crops (including all cultivars, varieties, and/or hybrids of these)
Blackberry
Loganberry
Raspberry, black
Raspberry, red
Raspberry, wild
Target Disease
Rate
fl oz/A
(lb ai/A) Application Timing Use Directions
Phytophthora root
rot
(Phytophthora
spp.)
2.4 - 19.2
(0.03 - 0.25)
Make the first application
before plants start to
grow in the spring.

Make a second
application during a
period favorable for root
growth and at least 7
days after the first
application.
Apply as a banded, soil-directed spray in
a minimum of 20 gal/A of water. Direct
the spray along each side of the crop row
and direct the application to the soil, near
and under the lower leaves. See
Section 4.1.2.

Use a higher rate for moderate to severe
infections.

The application is to be made at the per
acre rate concentrated in a band.

Apply ¼ - ½ inch of water after
application, either by overhead sprinkler
irrigation or garden hose drench on the
row.
Resistance Management:
x Refer to Section 3.2.
x Make no more than 2 sequential applications of Orondis (or any other FRAC 49-containing product)
before rotating to a fungicide with a different mode of action.
x Where 3 or more fungicide applications are made, use Orondis (or any other oxathiapiprolin-containing
product) in no more than 33% of the applications, or a maximum of 2 applications, whichever is fewer.
Where less than 3 fungicide applications are made, make no more than 1 application of Orondis (or any
other FRAC 49-containing product).
x Do not make more than two applications per year.
USE RESTRICTIONS
1) Refer to Section 6.1 for additional product use restrictions.
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed in the table for this
application type.
3) Maximum Number of Applications per Year: DO NOT make more than 2 applications per year.
4) Minimum Application Interval: 7 days
5) Maximum Annual Rate: 38.6 fl oz/A/year (0.50 lb ai/A/year)
a. DO NOT exceed 0.50 lb ai/A/year of oxathiapiprolin-containing products.
6) DO NOT use in nursery production of transplanted crops.
7) Pre-harvest Interval (PHI): 1 day

29


7.9 Citrus Fruit, Crop Group 10-10
Crops (including all cultivars, varieties, and/or hybrids of these)
Australian desert lime
Australian finger lime
Australian round lime
Brown River finger lime
Calamondin
Citron
Citrus hybrids
Grapefruit
Japanese summer grapefruit
Kumquat
Lemon
Lime
Mediterranean mandarin
Mount White lime
New Guinea wild lime
Orange, sour
Orange, sweet
Pummelo
Russell River lime
Satsuma mandarin
Sweet lime
Tachibana orange
Tahiti lime
Tangelo
Tangerine (Mandarin)
Tangor
Trifoliate orange
Uniq fruit
Target Disease
Rate
fl oz/A
(lb ai/A) Application Timing Use Directions
Brown rot
Citrus foot rot
Gummosis
Root rot
Trunk canker
(Phytophthora
spp.)
2.4 – 9.6
(0.03 - 0.12)
Soil Application-
Citrus Resets or New
Plantings: Make the first
application at planting
and up to one additional
application approximately
1-6 months later,
coinciding with a root
growth flush.
Apply as a soil spray around the base of
the tree to the zone of maximum root
density, or through irrigation water
(micro-sprinkler or drip). See Section
4.1.2.

For effective disease control, ensure that
the product solution thoroughly wets the
target root zone. If the application
method does not move the product to the
root zone, and rain is not imminent, then
follow with irrigation.
Soil Application-
Established Plantings:
Make two applications at
a 1- to 6-month interval,
coinciding with root
growth flush.
Apply as a soil spray beneath the tree
canopy or through irrigation water (micro-
sprinkler or drip). See Section 4.1.2.

For effective disease control, ensure that
the product solution thoroughly wets the
target root zone. If the application
method does not move the product to the
root zone, and rain is not imminent, then
follow with irrigation.
Brown rot
(Phytophthora
spp.)
1.2 – 2.4
(0.02- 0.03)
Foliar/Fruit Application:
Make a single application
to fruit before initial signs
of brown rot appear.
OR
For post-harvest control
of brown rot, apply at 0-1
day before harvest.
Make foliar applications by ground or air.
Apply in sufficient volume to provide
uniform and complete coverage of fruit.
Resistance Management:
x Refer to Section 3.2.
x Make no more than 2 sequential applications of Orondis (or any other FRAC 49-containing product)
before rotating to a fungicide with a different mode of action.
x Do not follow soil applications of Orondis with foliar applications of Orondis (or any other FRAC 49-
containing product). Use either soil applications or foliar applications but not both for disease control.

30

USE RESTRICTIONS
1) Refer to Section 6.1 for additional product use restrictions.
2) Maximum Single Application Rate:
a. Soil Application: DO NOT exceed the maximum rate listed in the table for this application type.
b. Foliar/Fruit Application: DO NOT exceed the maximum rate listed in the table for this application
type.
3) Maximum Number of Applications per Year:
a. Soil Applications: DO NOT make more than 2 applications per year.
b. Foliar/Fruit Application: DO NOT make more than 1 application per year.
4) Minimum Application Interval: 30 days
5) Maximum Annual Rate:
a. Foliar/Fruit Application: 2.4 fl oz/A/year (0.03 lb ai/A/year)
i) DO NOT exceed 0.03 lb ai/A/year of oxathiapiprolin-containing products with fruit/foliar
application.
b. Soil Application: 19.2 fl oz/A/year (0.25 lb ai/A/year)
i) DO NOT exceed 0.25 lb ai/A/year of oxathiapiprolin-containing products with soil application.
6) DO NOT use in citrus nurseries.
7) DO NOT use in nursery production of transplanted crops.
8) Pre-harvest Interval (PHI): 0 days

31


7.10 Cucurbit Vegetables, Crop Group 9
Crops (including all cultivars, varieties, and/or hybrids of these)
Chayote (fruit)
Chinese waxgourd (Chinese
preserving melon)
Citron melon
Cucumber
Gherkin
Gourd, edible
Hyotan
Cucuzza
Hechima
Chinese okra
Momordica spp.
Balsam apple
Balsam pear
Bitter melon
Chinese cucumber
Muskmelon
Cantaloupe
Casaba
Crenshaw melon
Golden pershaw melon
Honeydew melon
Honey balls
Mango melon
Persian melon
Pineapple melon
Santa Claus melon
Snake melon
True cantaloupe
Pumpkin

Squash, summer (field and
greenhouse)
Crookneck squash
Scallop squash
Straightneck squash
Vegetable marrow
Zucchini
Squash, winter
Acorn squash
Butternut squash
Calabaza
Hubbard squash
Spaghetti squash
Watermelon
Target Disease
Rate
fl oz/A
(lb ai/A) Application Timing Use Directions
Downy mildew
(Pseudoperonospora
cubensis)
1.0 – 2.4
(0.01 -
0.03)
Foliar Application: Begin
applications prior to disease
development and continue on a
5- to 14-day interval.
Apply as a foliar application by
ground, air-assisted (air blast), or
aerial application.

Use a higher rate when disease is
present, for longer application
intervals, or for susceptible
varieties.
Phytophthora Blight
(Phytophthora
capsici)
2.4 - 19.2
(0.03 -
0.25)
Soil Application: Apply at
planting.
Apply in-furrow, in transplant
water, or by drip irrigation or in
subsequent drip irrigation.

See Section 4.1.2 for at-planting,
in-furrow, or transplant-water
instructions.

See Section 4.5 for drip irrigation
instructions. In direct-seeded
plantings, drip applications must
not be made until after crop
emergence.

Use a higher rate for heavier soils,
for longer application intervals, or
for susceptible varieties.
1.0 – 2.4
(0.01 -
0.03)
Foliar/Fruit Application: Begin
foliar applications prior to
disease development and
continue on a 3- to 14-day
interval.

Apply by ground, air-assisted, or
aerial application.

For Pickle Fruit protection, apply
with a copper fungicide.

32

For pickle fruit protection, begin
applications starting at 1 inch
fruit on 3- to 5-day intervals.
Use a higher rate when disease is
present, for longer application
intervals, or for susceptible
varieties.
Downy Mildew
Phytophthora Blight
(foliar)
1.0 – 2.4
(0.01 -
0.03)
Foliar Application: Begin
applications prior to disease
development and continue on a
5- to 14-day interval.
Greenhouse Production of
edible peel cucurbits
(cucumbers, summer squash):
Apply as a foliar spray using a rate
range of 0.035 - 0.083 fl oz (0.21
tsp – 0.5 tsp) per gallon of spray
per 1518 sq ft.
Resistance Management:
x Refer to Section 3.2.
x Make no more than 2 sequential applications of Orondis (or any other FRAC 49-containing product)
before rotating to a fungicide with a different mode of action.
x Do not follow soil applications of Orondis with foliar applications of Orondis (or any other FRAC 49-
containing product). Use either soil applications or foliar applications but not both for disease control.
x Where 3 or more applications are made, use Orondis (or any other FRAC 49-containing product) in no
more than 33% of the applications, or a maximum of 4 applications, whichever is fewer. Where less than
3 fungicide applications are made, make no more than 1 application of Orondis (or any other FRAC 49 -
containing product).
x On multiple plantings in the same year, do not exceed 6 applications per acre per year.
USE RESTRICTIONS
1) Refer to Section 6.1 for additional product use restrictions.
2) Maximum Single Application Rate:
a. Soil Applications: DO NOT exceed the maximum rate listed in the table for this application type.
b. Foliar/Fruit Applications: DO NOT exceed the maximum rate listed in the table for this application
type.
3) Maximum Number of Applications per Year:
a. Soil Applications: DO NOT make more than 2 applications at the maximum rate per year.
b. Foliar/Fruit Application: DO NOT make more than 4 applications at the maximum rate per year.
4) Minimum Application Interval:
a. Foliar/Fruit Applications: 3 days for Phytophthora Blight and 5 days for Downy Mildew
b. Soil Applications: 7 days
5) Maximum Annual Rate:
a. Foliar/Fruit Applications: 9.6 fl oz/A/year (0.12 lb ai/A/year)
i. DO NOT exceed 0.12 lb ai/A/year of oxathiapiprolin-containing products with fruit/foliar
application.
b. Soil Applications: 38.6 fl oz/A/year (0.50 lb ai/A/year)
i. DO NOT exceed 0.50 lb ai/A/year of oxathiapiprolin-containing products with soil application.
6) DO NOT use in nursery production of transplanted crops.
7) Pre-harvest Interval (PHI): 0 days

33

7.11 Fruiting Vegetables, Crop Group 8-10
Crops (including all cultivars, varieties, and/or hybrids of these)
African eggplant
Bush tomato
Cocona
Currant tomato
Eggplant
Garden huckleberry
Goji berry
Groundcherry
Martynia
Naranjilla
Okra
Pea eggplant
Pepino
Pepper, bell (field and
greenhouse)
Pepper, non-bell (field and greenhouse)
Roselle
Scarlet eggplant
Sunberry
Tomatillo
Tomato (field and greenhouse)
Tree tomato
Target Disease
Rate
fl oz/A
(lb ai/A) Application Timing Use Directions
Buckeye Rot
(Phytophthora
parasitica)
Late Blight
(Phytophthora
infestans)
Pepper Downy
Mildew
(Peronospora
tabacina)
Phytophthora Blight
(Phytophthora
capsici)
1.0 – 2.4
(0.01 -
0.03)
Foliar Application: Begin
applications prior to disease
development and continue on
a 5- to 14-day interval.


Apply as a foliar application by
ground, air-assisted (air blast), or
aerial application.

Use a higher rate when disease is
present, for longer application
intervals, or for susceptible varieties.
Buckeye Rot
Late Blight
Phytophthora Blight
(foliar)
1.0 – 2.4
(0.01 -
0.03)
Foliar Application: Begin
applications prior to disease
development and continue on
a 5- to 14-day interval.
Greenhouse Production of bell and
non-bell peppers and tomatoes:
Apply as a foliar spray using a rate
range of 0.035 - 0.083 fl oz (0.21 tsp
– 0.5 tsp) per gallon of spray per
1518 sq ft.

Phytophthora Blight
and Crown Rot
(Phytophthora
capsici)
2.4 - 19.2
(0.03 -
0.25)
Soil Application: Apply at
planting.
Apply in-furrow, in transplant water,
or by drip irrigation or in subsequent
drip irrigation.

See Section 4.1.2 for at-planting, in-
furrow, or transplant-water
instructions.

See Section 4.5 for drip irrigation
instructions.

Use a higher rate for heavier soils, for
longer application intervals, or for
susceptible varieties.
Resistance Management:
x Refer to Section 3.2.
x Make no more than 2 sequential applications of Orondis (or any other FRAC 49-containing product)
before rotating to a fungicide with a different mode of action.
x Do not follow soil applications of Orondis with foliar applications of Orondis (or any other FRAC 49-
containing product). Use either soil applications or foliar applications but not both for disease control.

34

x Where 3 or more applications are made, use Orondis (or other oxathiapiprolin-containing product) in no
more than 33% of the applications, or a maximum of 4 applications, whichever is fewer. Where less than
3 fungicide applications are made, make no more than 1 application of Orondis (or any other FRAC 49-
containing product).
x On multiple plantings in the same year, do not exceed 6 applications per acre per year.
USE RESTRICTIONS
1) Refer to Section 6.1 for additional product use restrictions.
2) Maximum Single Application Rate:
a. Soil Applications: DO NOT exceed the maximum rate listed in the table for this application type.
b. Foliar Applications: DO NOT exceed the maximum rate listed in the table for this application type.
3) Maximum Number of Applications per Year:
a. Soil Applications: DO NOT make more than 2 applications at the maximum rate per year.
b. Foliar/Fruit Applications: DO NOT make more than 4 applications at the maximum rate per year.
4) Minimum Application Interval:
a. Foliar Applications: 5 days
b. Soil Applications: 7 days
5) Maximum Annual Rate:
a. Foliar Applications: 9.6 fl oz/A/year (0.12 lb ai/A/year)
i. DO NOT exceed 0.12 lb ai/A/year of foliar-applied oxathiapiprolin-containing products
b. Soil Applications: 38.6 fl oz/A/year (0.50 lb ai/A/year)
i. DO NOT exceed 0.50 lb ai/A/year of soil-applied oxathiapiprolin-containing products
6) DO NOT use in nursery production of transplanted crops.
7) Pre-harvest Interval (PHI): 0 days

35

7.12 Ginseng
Crops (including all cultivars, varieties, and/or hybrids of these)
Ginseng
Target Disease
Rate
fl oz/A
(lb ai/A) Application Timing Use Directions
Phytophthora Root
Rot
(Phytophthora
cactorum)
2.4 – 19.2
(0.03 -
0.25)
Begin applications prior to
disease development and
continue on a 14-day
interval.
Apply as a foliar application by ground, air-
assisted (air blast), or aerial application.

Use a higher rate for heavy disease
pressure conditions and susceptible
varieties.
Resistance Management:
x Refer to Section 3.2.
x Make no more than 2 sequential applications of Orondis (or any other FRAC 49-containing product)
before rotating to a fungicide with a different mode of action.
x Do not follow soil applications of Orondis with foliar applications of Orondis (or any other FRAC 49-
containing product). Use either soil applications or foliar applications but not both for disease control.
x Where 3 or more applications are made, use Orondis (or any other oxathiapiprolin-containing product) in
no more than 33% of the applications, or a maximum of 4 applications, whichever is fewer. Where less
than 3 fungicide applications are made, make no more than 1 application of Orondis (or any other FRAC
49-containing product).
USE RESTRICTIONS
1) Refer to Section 6.1 for additional product use restrictions.
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed in the table for this
application type.
3) Maximum Number of Applications per Year: DO NOT make more than 2 applications at the maximum
rate per year.
4) Minimum Application Interval: 14 days
5) Maximum Annual Rate: 38.6 fl oz/A/year (0.50 lb ai/A/year)
a. DO NOT exceed 0.50 lb ai/A/year of oxathiapiprolin-containing products
6) DO NOT use on Ginseng in California.
7) DO NOT use in nursery production of transplanted crops.
8) Pre-harvest Interval (PHI): 14 days

36

7.13 Hops
Crops (including cultivars, varieties, and/or hybrids of these)
Hops [Not for use in California]
Target Disease
Rate
fl oz/A
(lb ai/A) Application Timing Use Directions
Downy Mildew
(soil/crown phase)
(Pseudoperonospora
humuli)

Phytophthora root rot
(Phytophthora spp.)
4.8 – 19.2
(0.06 -
0.25)
Soil Application:

For New Plantings, make
a single soil application at
planting.

For Established
Plantings, make a single
soil application as soon as
plants begin growing in the
spring.
Apply as a soil drench or soil directed
spray, or through irrigation water (micro-
sprinkler, or drip).

For effective disease control, ensure
that the product solution thoroughly
wets the target root zone. If the
application method does not move the
product to the root zone, and rain is not
imminent, then follow with irrigation.

See Section 4.1.2 for at-planting
instructions. See Section 4.5 for drip
irrigation instructions.

Use a higher rate in fields with a history
of disease.

Use Orondis in conjunction with good
cultural practices to manage diseases.
Downy Mildew
(Pseudoperonospora
humuli)
1.0 – 2.4
(0.01 -
0.03)

Foliar Application:

Provided that Orondis was
NOT used via soil
application, make up to
three foliar applications on
a 7- to 10-day interval,
beginning prior to disease
development.
Apply as a foliar application by ground
or air-assisted (air blast) application.

Use sufficient volume to provide
thorough coverage of the foliage, and
increase the volume as plants develop.

See Section 4.4.5 for adjuvant
recommendations.

Use a higher rate when conditions are
favorable for disease development, for
longer application intervals, or for
susceptible varieties.
Resistance Management:
x Refer to Section 3.2.
x Make no more than 2 sequential applications of Orondis (or any other FRAC 49-containing product)
before rotating to a fungicide with a different mode of action.
x Do not follow soil applications of Orondis (or any other FRAC 49-containing product) with foliar
applications of Orondis (or any other FRAC 49-containing product). Use either soil applications or foliar
applications but not both for disease control.
x Where 3 or more applications are made, use Orondis (or any other FRAC 49- containing product) in no
more than 33% of the applications, or a maximum of 3 applications, whichever is fewer. Where less than
3 fungicide applications are made, make no more than 1 application of Orondis (or any other FRAC 49-
containing product).

37

USE RESTRICTIONS
1) Refer to Section 6.1 for additional product use restrictions.
2) Maximum Single Application Rate:
a. Soil Applications: DO NOT exceed the maximum rate listed in the table for this application type.
b. Foliar Applications: DO NOT exceed the maximum rate listed in the table for this application type.
3) Maximum Number of Applications per Year:
a. Soil Applications: DO NOT make more than 1 applications at the maximum rate per year.
b. Foliar/Fruit Application: DO NOT make more than 3 applications at the maximum rate per year.
4) Minimum Application Interval: 7 days
5) Maximum Annual Rate:
a. Foliar Applications: 7.2 fl oz/A/year (0.09 lb ai/A/year)
i) DO NOT exceed 0.09 lb ai/A/year of foliar-applied oxathiapiprolin-containing products.
b. Soil Applications: 19.2 fl oz/A/year (0.25 lb ai/A/year)
i) DO NOT exceed 0.25 lb ai/A/year of soil-applied oxathiapiprolin-containing products.
6) DO NOT use in nursery production of transplanted crops.
7) Pre-harvest Interval (PHI):
a. Foliar Applications: 7 days
b. Soil Applications: 7 days

38

7.14 Leafy Greens, Crop Subgroup 4-16A
Crops (including all cultivars, varieties, and/or hybrids of these)
Amaranth, Chinese
Amaranth, leafy
Aster, Indian
Blackjack
Cat’s whiskers
Cham-chwi
Cham-na-mul
Chipilin
Chervil, fresh leaves
Chrysanthemum, garland
Cilantro, fresh leaves
Corn salad
Cosmos
Dandelion, leaves
Dang-gwi, leaves
Dillweed
Dock
Dol-nam-mul
Ebolo
Endive
Escarole
Fameflower
Feather cockscomb
Good King Henry
Huauzontle
Jute, leaves
Lettuce, bitter
Lettuce, head
Lettuce, leaf
Orach
Parsley, fresh leaves
Plantain, buckhorn
Primrose, English
Purslane, garden
Purslane, winter
Radicchio
Spinach
Spinach, Malabar
Spinach, New Zealand
Swiss chard
Tanier spinach
Violet, Chinese
Target Disease
Rate
fl oz/A
(lb ai/A) Application Timing Use Directions
Downy Mildew
(Bremia lactucae)
4.8 - 19.2
(0.06 -
0.25)
Soil Application: Apply at
planting.
Apply in-furrow, in transplant water,
or by drip irrigation, or in subsequent
drip irrigation.

See Section 4.1.2 for at-planting, in-
furrow, or transplant-water
instructions.

See Section 4.5 for drip irrigation
instructions.

Use a higher rate for heavier soils, for
longer application intervals, or for
susceptible varieties.
1.0 – 2.4
(0.01 -
0.03)
Foliar Application: Begin
applications prior to disease
development and continue on
a 3- to 14-day interval.
Apply as a foliar application by
ground, air-assisted (air blast), or
aerial application.

Use a higher rate when disease is
present, for longer application
intervals, or for susceptible varieties.
Downy Mildew
(Peronospora
farinosa)
1.2 – 2.4
(0.02 -
0.03)
Foliar Application: Begin
applications prior to disease
development and continue on
a 3- to 10-day interval.
Resistance Management:
x Refer to Section 3.2.
x Make no more than 2 sequential applications of Orondis (or any other FRAC 49-containing product)
before rotating to a fungicide with a different mode of action.
x Do not follow soil applications of Orondis with foliar applications of Orondis (or any other FRAC 49-
containing product). Use either soil applications or foliar applications but not both for disease control.
x When 3 or more applications are made, use Orondis (or any other FRAC 49-containing product) in no
more than 33% of the applications, or a maximum of 4 applications, whichever is fewer. Where less than
3 fungicide applications are made, make no more than 1 application of Orondis (or any other FRAC 49-
containing product).
x On multiple plantings in the same year, do not exceed 6 applications per acre per year.

39

USE RESTRICTIONS
1) Refer to Section 6.1 for additional product use restrictions.
2) Maximum Single Application Rate:
a. Soil Applications: DO NOT exceed the maximum rate listed in the table for this application type.
b. Foliar Applications: DO NOT exceed the maximum rate listed in the table for this application type.
3) Maximum Number of Applications per Year:
a. Soil Applications: DO NOT make more than 2 applications at the maximum rate per year, one
application per crop.
b. Foliar/Fruit Application: DO NOT make more than 4 applications at the maximum rate per year.
4) Minimum Application Interval:
a. Foliar Applications: 3 days
b. Soil Applications: 7 days
5) Maximum Annual Rate:
a. Foliar Applications: 9.6 fl oz/A/year (0.12 lb ai/A/year)
i. DO NOT exceed 0.12 lb ai/A/year of foliar-applied oxathiapiprolin-containing products.
b. Soil Applications: 38.6 fl oz/A/ year (0.50 lb ai/A/year)
i. DO NOT exceed 0.50 lb ai/A/year of soil-applied oxathiapiprolin-containing products.
6) DO NOT use in nursery production of transplanted crops.
7) Pre-harvest Interval (PHI): 0 days

40

7.15 Low Growing Berry, Crop Subgroup 13-07G (except cranberry and
blueberry, lowbush)
Crops (including all cultivars, varieties, and/or hybrids of these)
Bearberry
Bilberry
Cloudberry

Lingonberry
Muntries
Partridgeberry
Strawberry
Target Disease
Rate
fl oz/A
(lb ai/A) Application Timing Use Directions
Crown Rot
(Phytophthora
cactorum)
Red Stele Root Rot
(Phytophthora
fragariae)
4.8 – 11
(0.06 -
0.14)
Soil Application:

For New Plantings, make a
single soil application at
planting. A second application
may be used 7-14 days later if
needed.

For Established Plantings,
make a single soil application
as soon as plants begin
growing in the spring. A
second application may be
made 7-14 days later if needed.
Apply as a soil drench or soil directed
spray, or through irrigation water
(micro-sprinkler, or drip).

See Section 4.5 for drip irrigation
instructions.

Use a higher rate in fields with a
history of Phytophthora disease.

For Blueberry, lowbush use
directions, refer to Section 7.2.
Leather Rot
(Phytophthora
cactorum)
1.0 – 2.4
(0.01 -
0.03)
Foliar Application:

Provided that Orondis was
NOT used via soil application,
make up to two foliar
applications: the first at fruit set
and, if required, a second
application during harvest.
Apply by ground.

Use a higher rate in fields with a
history of Phytophthora disease.
Resistance Management:
x Refer to Section 3.2.
x Make no more than 2 sequential applications of Orondis (or any other FRAC 49-containing product)
before rotating to a fungicide with a different mode of action.
x Do not follow soil applications of Orondis with foliar applications of Orondis (or any other FRAC 49-
containing product). Use either soil applications or foliar applications but not both for disease control.
USE RESTRICTIONS
1) Refer to Section 6.1 for additional product use restrictions.
2) Maximum Single Application Rate:
a. Soil Applications: DO NOT exceed the maximum rate listed in the table for this application type.
b. Foliar Applications: DO NOT exceed the maximum rate listed in the table for this application type.
3) Maximum Number of Applications per Year:
a. Soil Applications: DO NOT make more than 2 applications at the maximum rate per year.
b. Foliar/Fruit Application: DO NOT make more than 2 applications at the maximum rate per year.
4) Minimum Application Interval: 7 days
5) Maximum Annual Rate:

41

a. Foliar Applications: 4.8 fl oz/A/year (0.06 lb ai/A/year)
i) DO NOT apply more than 0.06 lb ai/A/year of foliar-applied oxathiapiprolin-containing products.
b. Soil Applications: 22 fl oz/A/year (0.29 lb ai/A/year)
i) DO NOT apply more than 0.29 lb ai/A/year of soil-applied oxathiapiprolin-containing products.
6) DO NOT use in nursery production of transplanted crops.
7) Pre-harvest Interval (PHI):
a. Foliar Applications: 0 days
b. Soil Applications: 14 days

42


7.16 Peas, Succulent Shelled and Edible-Podded
Crops (including all cultivars, varieties, and/or hybrids of these)
Chickpea, edible podded
Chickpea, succulent shelled
Dwarf pea, edible podded
Edible podded pea, edible
podded
English pea, succulent shelled
Garden pea, succulent shelled
Grass-pea, edible podded
Green pea, edible podded
Green pea, succulent shelled
Lentil, edible podded
Lentil, succulent shelled
Pigeon pea, edible podded
Pigeon pea, succulent shelled
Snap pea, edible podded
Snow pea, edible podded
Sugar snap pea, edible podded
Target Disease
Rate
fl oz/A
(lb ai/A) Application Timing Use Directions
Downy Mildew
(Peronospora
viciae,
Phytophthora
phaseoli)
1.2 – 2.4
(0.02 -
0.03)
Begin applications prior
to disease development
and continue on a 5- to
7- day interval.
Apply by ground, air-assisted, or aerial
application.

Use a higher rate when disease is present, for
longer application intervals, or for susceptible
varieties.
Resistance Management:
x Refer to Section 3.2.
x Make no more than 2 sequential applications of Orondis (or any other FRAC 49-containing product)
before rotating to a fungicide with a different mode of action.
x Where 3 or more applications are made, use Orondis (or any other FRAC 49- containing product) in no
more than 33% of the applications, or a maximum of 4 applications, whichever is fewer. Where less than 3
fungicide applications are made, make no more than 1 application of Orondis (or any other FRAC 49-
containing product).
x On multiple plantings in the same year, do not exceed 6 applications per acre per year.
USE RESTRICTIONS
1) Refer to Section 6.1 for additional product use restrictions.
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed on label for this application
type.
3) Maximum Number of Applications per Year: DO NOT make more than 4 applications at the maximum
rate per year.
4) Minimum Application Interval: 5 days
5) Maximum Annual Rate: 9.6 fl oz/A/year (0.12 lb ai/A/year)
a. DO NOT exceed 0.12 lb ai/A/year of oxathiapiprolin-containing products.
6) DO NOT use on Succulent Shelled and Edible-Podded Peas in California.
7) DO NOT use in nursery production of transplanted crops.
8) Pre-harvest Interval (PHI): 0 days

43

7.17 Stalk and Stem Vegetables, Crop Subgroup 22A
Crops (including all cultivars, varieties, and/or hybrids of these)
Agave
Aloe vera
Asparagus
Bamboo shoots
Celtuce
Fennel, Florence, fresh leaves and stalk
Fern, edible, fiddlehead
Kale, sea
Kohlrabi
Palm hearts
Prickly pear, pads
Prickly pear, Texas, pads
Target Disease
Rate
fl oz/A
(lb ai/A) Application Timing Use Directions
Phytophthora rot
(Phytophthora
spp.)
2.4 - 19.2
(0.03 - 0.25)
New plantings: Use as
a crown soak prior to
planting.
Use 10 gallons of solution, or the volume
required to fully submerge 100 crowns.

To determine the amount of product
needed to treat 100 crowns, first
determine the number of plants per acre
using typical plant spacing.

Then use the following formula:
(100 ÷ number plants per acre) x use
rate = product needed to treat 100
crowns in 10 gallons of solution.

Make a crown soak solution in a large
enough container to ensure that the
crowns are fully submerged.

Place crowns in fungicide solution and
soak for a minimum of 10 minutes.

After soaking, remove from solution, drain,
and then plant the crowns.
Established plantings:
Make the first application
to established asparagus
beds at least 14 days
prior to harvest (first
cutting).

Make a second
application on the day of
the first cutting.
Apply as a soil-directed banded spray in a
minimum of 20 gal/A of water.

The application is to be made at the per
acre rate concentrated in a band.

Apply ¼ - ½ inch of water after application,
either by overhead sprinkler irrigation or
garden hose drench on the row.
Orondis may be applied by drip irrigation
using the following directions:
x Apply 1/2 acre-inch of water alone.
x Then apply the first 1/4 - 1/3 of the
irrigation water with Orondis.
x Finally, apply the final 2/3 – 3/4 of the
irrigation water without Orondis.

Refer to Section 4.5 for additional drip
irrigation instructions.
Resistance Management:
x Refer to Section 3.2.

44

x Make no more than 2 sequential applications of Orondis (or any other FRAC 49-containing product)
before rotating to a fungicide with a different mode of action.
x Where 3 or more applications are made, use Orondis (or any other FRAC 49- containing product) in no
more than 33% of the soil fungicide applications, or a maximum of 2 applications, whichever is fewer.
Where less than 3 fungicide applications are made, make no more than 1 application of Orondis (or any
other FRAC 49-containing product).
USE RESTRICTIONS
1) Refer to Section 6.1 for additional product use restrictions.
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed in the table for this
application type.
3) Maximum Number of Applications per Year: DO NOT make more than 2 applications per year.
4) Minimum Application Interval: 14 days
5) Maximum Annual Rate: 38.6 fl oz/A/year (0.50 lb ai/A/year)
a. DO NOT exceed 0.50 lb ai/A/year of oxathiapiprolin-containing products.
6) DO NOT use in nursery production of transplanted crops.
7) Pre-harvest Interval (PHI): 0 days

45

7.18 Tobacco
Crops (including all cultivars, varieties, and/or hybrids of these)
Tobacco
Target Disease
Rate
fl oz/A
(lb ai/A) Application Timing Use Directions
Black Shank
(Phytophthora
parasitica var.
nicotianae)

2.4
(0.03)
Foliar Application:
Apply as a foliar spray to
the tobacco transplants in
the transplant tray 24-48
hours prior to
transplanting.
Immediately water the spray off the foliage
into the transplant tray soil, not watering
past soil saturation.

See Section 4.1.2 for additional
information.
4.8 - 19.2
(0.06 -
0.25)
Soil Application: Apply
at planting (in-furrow or in
transplant water).
See Section 4.1.2 for additional
information.

Apply soil-directed or
banded applications at
1st cultivation or layby.
See Section 4.1.2 for additional
information.
Blue Mold
(Peronospora
tabacina)
1.0 - 2.4
(0.01-
0.03)
Foliar Application:
Begin applications prior
to disease development
and continue on a 7- to
10-day interval.
Apply by ground, air-assisted, or aerial
application.

Use a higher rate when disease is present,
for longer application intervals, or for
susceptible varieties.
Resistance Management:
x Refer to Section 3.2.
x Make no more than 2 sequential applications of Orondis (or any other FRAC 49-containing product)
before rotating to a fungicide with a different mode of action.
x Do not follow soil applications of Orondis with foliar applications of Orondis (or any other FRAC 49-
containing product). Use either soil applications or foliar applications but not both for disease control.
x Where 3 or more applications are made, use Orondis (or other oxathiapiprolin-containing product) in no
more than 33% of the applications, or a maximum of 4 applications, whichever is fewer. Where less than
3 fungicide applications are made, make no more than 1 application of Orondis (or any other FRAC 49 -
containing product).
USE RESTRICTIONS
1) Refer to Section 6.1 for additional product use restrictions.
2) Maximum Single Application Rate:
a. Soil or Soil-Directed Applications: DO NOT exceed the maximum rate listed in the table for this
application type.
b. Foliar Applications (including transplant tray application): DO NOT exceed the maximum rate
listed in the table for this application type.
3) Maximum Number of Applications per Year:
a. Soil or Soil-Directed Applications: DO NOT make more than 2 applications at the maximum rate
per year.
b. Foliar/Fruit Applications: DO NOT make more than 4 applications at the maximum rate per year.
4) Minimum Application Interval: 7 days for all application types

46

5) Maximum Annual Rate:
a. Foliar Applications (including transplant tray application): 9.6 fl oz/A/year (0.12 lb ai/A/year)
i. DO NOT exceed 0.12 lb ai/A/year of foliar-applied oxathiapiprolin-containing products.
b. Soil or Soil-Directed Applications: 38.6 fl oz/A/year (0.50 lb ai/A/year)
i. DO NOT exceed 0.50 lb ai/A/year of oxathiapiprolin-containing products with soil/soil-directed
application.
6) DO NOT use on tobacco in California.
7) Pre-harvest Interval (PHI): 7 days

47


7.19 Tree Nuts, Crop Group 14-12
Crops (including all cultivars, varieties, and/or hybrids of these)
African nut-tree[*]
Almond[*]
Beechnut[*]
Brazil Nut[*]
Brazilian pine[*]
Bunya[*]
Bur Oak[*]
Butternut[*]
Cajou Nut[*]
Candlenut[*]
Cashew[*]
Chestnut[*]
Chinquapin[*]
Coconut[*]
Coquito Nut[*]
Dika Nut[*]
Ginkgo[*]
Guiana chestnut[*]
Hazelnut (Filbert)[*]
Heartnut[*]
Hickory Nut[*]
Japanese horse-chestnut[*]
Macadamia Nut[*]
Mongongo Nut[*]
Monkey-Pot[*]
Monkey Puzzle Nut[*]
Okari Nut[*]
Pachira Nut[*]
Peach Palm Nut[*]
Pecan[*]
Pequi[*]
Pili Nut[*]
Pine Nut[*]
Pistachio[*]
Sapucaia Nut[*]
Tropical Almond[*]
Walnut, black[*]
Walnut, English[*]
Yellowhorn[*]
Target Disease
Rate
fl oz/A
(lb ai/A) Application Timing Use Directions
Phytophthora root
and crown rot
(Phytophthora
spp.)

4.8 – 9.6
(0.06 -
0.12)
For Resets or New Plantings,
make the first soil application at
planting and up to one
additional application 1-6
months later, coinciding with a
root growth flush.

For Established Plantings,
make up to two soil
applications at a 1- to 6-month
interval, coinciding with root
growth flush.
[*Not for use in California]

Apply as a drench or soil spray under
the canopy around the base of the
tree to the zone of maximum root
density, or through irrigation water
(micro-sprinkler, drip, or flood).

For effective disease control, ensure
that the product solution thoroughly
wets the target root zone. If the
application does not move the product
to the root zone, and rain is not
imminent, then follow with irrigation.
Resistance Management:
x Refer to Section 3.2.
x Make no more than 2 sequential applications of Orondis (or any other FRAC 49-containing product)
before rotating to a fungicide with a different mode of action.
USE RESTRICTIONS
1) Refer to Section 6.1 for additional product use restrictions.
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed in the table for this
application type.
3) Maximum Number of Applications per Year: DO NOT make more than 2 applications at the maximum
rate per year.
4) Minimum Application Interval: 30 days
5) Maximum Annual Rate: 19.2 fl oz/A/year (0.25 lb ai/A/year)
a. DO NOT apply more than 0.25 lb ai/A/year of oxathiapiprolin-containing products.
6) DO NOT use in nursery production of transplanted crops.
7) Pre-harvest Interval (PHI): 30 days

48

7.20 Tropical and Subtropical Fruit, Medium to Large Fruit, Smooth,
Inedible Peel, Crop Subgroup 24B
Crops (including all cultivars, varieties, and/or hybrids of these)
Abiu[*]
Akee apple [*]
Avocado[*]
Avocado, Guatemalan[*]
Avocado, Mexican[*]
Avocado, West Indian[*]
Bacury[*]
Banana[*]
Banana, dwarf[*]
Binjai[*]
Canistel[*]
Cupuacu[*]
Etambe[*]
Jatoba[*]
Kei apple[*]
Langsat[*]
Lanjut[*]
Lucuma[*]
Mabolo[*]
Mango[*]
Mango, horse[*]
Mango, Saipan[*]
Mangosteen[*]
Paho[*]
Papaya[*]
Pawpaw, common[*]
Pelipisan[*]
Pequi[*]
Pequia[*]
Persimmon, American[*]
Plantain[*]
Pomegranate[*]
Poshte[*]
Quandong[*]
Sapote, black[*]
Sapote, green[*]
Sapote, white[*]
Sataw[*]
Screw-pine[*]
Star apple[*]
Tamarind-of-the-Indies[*]
Wild Loquat[*]
Target Disease
Rate
fl oz/A
(lb ai/A) Application Timing Use Directions
Phytophthora root
and crown rot
(Phytophthora
spp.)

4.8 – 9.6
(0.06 -
0.12)
Soil Application:

For Resets or New Plantings,
make the first soil application at
planting. An additional
application may be made 30
days later if needed, coinciding
with a root growth flush.

For Established Plantings,
make up to two soil
applications on a 30-day
interval, coinciding with root
growth flush.
[*Not for use in California]

Apply as a drench or soil spray under
the canopy around the base of the
tree to the zone of maximum root
density, or through irrigation water
(micro-sprinkler, drip, or flood).

For effective disease control, ensure
that the product solution thoroughly
wets the target root zone. If the
application does not move the product
to the root zone, and rain is not
imminent, then follow with irrigation.
Phytophthora root
and crown rot
(Phytophthora
spp.)

1.0 - 2.4
(0.01 -
0.03)
Foliar Application:

Provided that Orondis was
NOT used via soil application,
apply at fruiting prior to disease
development and continue on a
14- to 28-day schedule.
Apply by ground.

Under heavy disease pressure, use
the shortest interval.
Resistance Management:
x Refer to Section 3.2.
x Make no more than 2 sequential applications of Orondis (or any other FRAC 49-containing product)
before rotating to a fungicide with a different mode of action.
x Do not follow soil applications of Orondis products with foliar applications of Orondis (or any other FRAC
49-containing product). Use either soil applications or foliar applications but not both for disease control.
USE RESTRICTIONS
1) Refer to Section 6.1 for additional product use restrictions.
2) Maximum Single Application Rate:
a. Soil Applications: DO NOT exceed the maximum rate listed in the table for this application type.
b. Foliar Applications: DO NOT exceed the maximum rate listed in the table for this application type.

49

3) Maximum Number of Applications per Year:
a. Soil Applications: DO NOT make more than 2 applications at the maximum rate per year.
b. Foliar/Fruit Application: DO NOT make more than 2 applications at the maximum rate per year.
4) Minimum Application Interval:
a. Soil Applications: 30 days
b. Foliar Applications: 14 days
5) Maximum Annual Rate:
a. Foliar Applications: 4.8 fl oz/A/year (0.06 lb ai/A/year)
i) DO NOT apply more than 0.06 lb ai/A/year of foliar-applied oxathiapiprolin-containing products.
b. Soil Applications: 19.2 fl oz/A/year (0.25 lb ai/A/year)
i) DO NOT apply more than 0.25 lb ai/A/year of soil-applied oxathiapiprolin-containing products.
6) DO NOT use in nursery production of transplanted crops.
7) Pre-harvest Interval (PHI):
a. Foliar Applications: 1 day
b. Soil Applications: 30 days

50


7.21 Tuberous and Corm Vegetables, Crop Subgroup 1C
Crops (including all cultivars, varieties, and/or hybrids of these)
Arracacha
Arrowroot
Artichoke, Chinese
Artichoke, Jerusalem
Canna, edible
Cassava, bitter and sweet
Chayote (root)
Chufa
Dasheen (taro)
Ginger
Leren
Potato
Sweet potato
Tanier
Turmeric
Yam bean
Yam, true
Target Disease
Rate
fl oz/A
(lb ai/A) Application Timing Use Directions
Late Blight
(Phytophthora
infestans)
0.8 – 2.4
(0.01 -
0.03)
Foliar Application:
Begin applications prior to
disease development and
continue on a 5- to 14-day
interval.
Apply as a foliar application by ground, air-
assisted, or aerial application.

Use a higher rate when disease is present,
for longer application intervals, or for
susceptible varieties.
Pink Rot
(Phytophthora
erythroseptica)
2.4 – 9.6
(0.03 -
0.12)
Soil Application:
Apply at planting.
Apply as an in-furrow application as a 6- to 8-
inch band directly over the seed pieces in the
furrow, and then close furrows.
3.4
(0.04)
Make the first application
at nickel-sized tubers
(coinciding with beginning
of flowering).

Follow with a second
application after 10-14
days.
For effective disease control, ensure that the
product solution thoroughly wets the target
root zone. If the application method does not
move the product to the root zone, follow with
irrigation to do so.
Resistance Management:
x Refer to Section 3.2.
x Make no more than 2 sequential applications of Orondis (or any other FRAC 49-containing product) before
rotating to a fungicide with a different mode of action.
x Do not follow soil applications of Orondis with foliar applications of Orondis (or any other FRAC 49-
containing product). Use either soil applications or foliar applications but not both for disease control.
x Where 3 or more foliar applications are made, use Orondis (or other oxathiapiprolin-containing product) in
no more than 33% of the applications, or a maximum of 4 applications, whichever is fewer. Where less
than 3 fungicide applications are made, make no more than 1 application of Orondis (or any other FRAC
49-containing product).
x On multiple plantings in the same year, do not exceed 6 applications per acre per year.
USE RESTRICTIONS
1) Refer to Section 6.1 for additional product use restrictions.
2) Maximum Single Application Rate:
a. Soil or Soil-Directed Applications: DO NOT exceed the maximum rate listed in the table for this
application type.
b. Foliar Applications: DO NOT exceed the maximum rate listed in the table for this application type.
3) Maximum Number of Applications per Year:
a. Soil or Soil-Directed Applications: DO NOT make more than 3 applications at the maximum rate
per year.
b. Foliar/Fruit Application: DO NOT make more than 4 applications at the maximum rate per year

51

4) Minimum Application Interval:
a. Foliar Applications: 5 days
b. Soil or Soil-Directed Applications: 10 days
5) Maximum Annual Rate:
a. Foliar Applications: 9.6 fl oz/A/year (0.12 lb ai/A/year)
i. DO NOT exceed 0.12 lb ai/A/year of foliar-applied oxathiapiprolin-containing products.
b. Soil or Soil-Directed Applications: 19.2 fl oz/A/year (0.25 lb ai/A/year)
i. DO NOT exceed 0.25 lb ai/A/year of oxathiapiprolin-containing products with soil/soil-directed
application.
6) DO NOT use on Tuberous and Corm Vegetables in California.
7) DO NOT use in nursery production of transplanted crops.
8) Pre-harvest Interval (PHI): 5 days

52

8.0 STORAGE AND DISPOSAL
STORAGE AND DISPOSAL
Do not contaminate water, food, or feed by storage or disposal.

Pesticide Storage
Keep container closed when not in use. Always store pesticides in the original container only,
away from other pesticides, food, pet food, feed, seed, fertilizers, and veterinary supplies. If a
leaky container must be contained within another, mark the outer container to identify the
contents. Storage areas must be locked and secure from vandalism, with precautionary signs
posted. The storage area must be dry, well-lit, and well-ventilated. Keep pesticide storage
areas clean. Clean up any spills promptly. Protect pesticide containers from extreme heat
and cold. Store herbicides, insecticides, and fungicides in separate areas within the storage
unit. Place liquid formulations on lower shelves and dry formulations above. Maintaining a
spill kit and fire extinguisher on hand and having emergency phone numbers posted will allow
you to be prepared for emergencies. If spill cleanup PPE is stored nearby, but outside the
pesticide storage area, it must be accessible when needed.

Pesticide Disposal
Wastes resulting from the use of this product must be disposed of on site or at an approved
waste disposal facility.

Container Handling [(less than or equal to 5 gallons)]
Non-refillable container. Do not reuse or refill this container. Triple rinse container (or
equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents
into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip.
Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into
application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10
seconds after the flow begins to drip. Repeat this procedure two more times. Then offer for
recycling if available or puncture and dispose of in a sanitary landfill, or by incineration, or by
other procedures approved by state and local authorities.

Container Handling [(greater than 5 gallons)]
Non-refillable container. Do not reuse or refill this container. Triple rinse container (or
equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents
into application equipment or a mix tank. Fill the container 1/4 full with water. Replace and
tighten closures. Tip container on its side and roll it back and forth, ensuring at least one
complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth
several times. Turn the container over onto its other end and tip it back and forth several
times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use
or disposal. Repeat this procedure two more times. Then offer for recycling if available or
puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures
approved by state and local authorities.

Container Handling [(greater than 5 gallons)]
Refillable container. Refill this container with pesticide only. Do not reuse this container for
any other purpose. Cleaning the container before final disposal is the responsibility of the

53

person disposing of the container. Cleaning before refilling is the responsibility of the person
refilling. To clean the container before final disposal, empty the remaining contents from this
container into application equipment or mix tank. Fill the container about 10 percent full with
water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump
rinsate into application equipment or rinsate collection system. Repeat this pressure rinsing
procedure two more times. Then offer for recycling if available or puncture and dispose of in
a sanitary landfill, or by incineration, or by other procedures approved by state and local
authorities.

CONTAINER IS NOT SAFE FOR FOOD, FEED, OR DRINKING WATER.

54


9.0 CONDITIONS OF SALE AND LIMITATION OF WARRANTY
AND LIABILITY

NOTICE: Read the entire Directions for Use and Conditions of Sale and Limitation of
Warranty and Liability before buying or using this product. If the terms are not
acceptable, return the product at once, unopened, and the purchase price will be
refunded.

The Directions for Use of this product must be followed carefully. It is impossible to eliminate
all risks inherently associated with the use of this product. Crop injury, ineffectiveness or
other unintended consequences may result because of such factors as manner of use or
application, weather or crop conditions, presence of other materials or other influencing
factors in the use of the product, which are beyond the control of SYNGENTA CROP
PROTECTION, LLC or Seller. To the extent permitted by applicable law, Buyer and User
agree to hold SYNGENTA and Seller harmless for any claims relating to such factors.

SYNGENTA warrants that this product conforms to the chemical description on the label and
is reasonably fit for the purposes stated in the Directions for Use, subject to the inherent risks
referred to above, when used in accordance with directions under normal use conditions. To
the extent permitted by applicable law: (1) this warranty does not extend to the use of the
product contrary to label instructions or under conditions not reasonably foreseeable to or
beyond the control of Seller or SYNGENTA, and (2) Buyer and User assume the risk of any
such use. TO THE EXTENT PERMITTED BY APPLICABLE LAW, SYNGENTA MAKES NO
WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE
NOR ANY OTHER EXPRESS OR IMPLIED WARRANTY EXCEPT AS WARRANTED BY
THIS LABEL.

To the extent permitted by applicable law, in no event shall SYNGENTA be liable for any
incidental, consequential or special damages resulting from the use or handling of this
product. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THE EXCLUSIVE
REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY OF SYNGENTA
AND SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES
(INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, CONTRACT,
NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) RESULTING FROM THE
USE OR HANDLING OF THIS PRODUCT, SHALL BE THE RETURN OF THE PURCHASE
PRICE OF THE PRODUCT OR, AT THE ELECTION OF SYNGENTA OR SELLER, THE
REPLACEMENT OF THE PRODUCT.

SYNGENTA and Seller offer this product, and Buyer and User accept it, subject to the
foregoing Conditions of Sale and Limitation of Warranty and Liability, which may not be
modified except by written agreement signed by a duly authorized representative of
SYNGENTA.

55


10.0 APPENDIX
10.1 Orondis Use Summary Table [Optional Text]
[Start of Optional Text]
IMPORTANT: The table below is a summary of the Crop Use Directions for
Orondis. However, it is important for the user to read and follow the
complete instructions contained within this label.
Crop or Crop Group
or Crop Subgroup
with examples
Maximum
Single
Application
Rate
(fl oz/A)
Maximum
Single
Application
Rate (lb
ai/A)
Minimum
Application
Interval
(days)
Pre-
Harvest
Interval
(PHI,
days)
Maximum
Annual Rate
(fl
oz/A/year)
Maximum
Annual Rate
(lb
ai/A/year)
Basil, fresh and
dried (field and
greenhouse ONLY)
2.4 0.03 5 0 9.6 0.12
Blueberry,
lowbush[*] 11 0.14 7 0 22 0.29
Brassica, Head and
Stem Vegetables
(Crop Group 5-16):
cabbage, broccoli,
cauliflower
2.4 0.03 5 0 9.6 0.12
Brassica Leafy
Greens (Crop
Subgroup 4-16B):
collards, mustard
greens
2.4 0.03 5 0 9.6 0.12
Bulb Vegetables
(Crop Group 3-07) 2.4 0.03 5 0 9.6 0.12
Bushberry subgroup
13-07B, except
blueberry, lowbush
blueberry, highbush
19.2 0.25 7 1 38.6 0.50

56


Cacao
2.4 foliar or
9.6 soil
0.03 foliar or
0.12 soil 90 0 2.4 foliar or
19.2 soil
0.03 foliar or
0.25 soil
Caneberry (Crop
Subgroup 13-07A):
blackberry 19.2 0.25 7 1 38.6 0.50
Citrus Fruit (Crop
Group 10-10):
lemon, orange,
grapefruit
2.4 foliar or
9.6 soil
0.03 foliar or
0.12 soil 30 0 2.4 foliar or
19.2 soil
0.03 foliar or
0.25 soil
Cucurbit vegetables
(Crop Group 9):
cucumber,
cantaloupe,
watermelon, squash
2.4 foliar or
19.2 soil
0.03 foliar or
0.25 soil
3 foliar or
7 soil 0 9.6 foliar or
38.6 soil
0.12 foliar or
0.50 soil
Fruiting vegetables
(Crop Group 8-10):
tomato, pepper


2.4 foliar or
19.2 soil
0.03 foliar or
0.25 soil
5 foliar or
7 soil 0 9.6 foliar or
38.6 soil
0.12 foliar or
0.50 soil
Ginseng* 19.2 0.25 14 14 38.6 0.50
Hops[*] 2.4 foliar or
19.2 soil
0.03 foliar or
0.25 soil 7 7 7.2 foliar or
19.2 soil
0.09 foliar or
0.25 soil
Leafy greens (Crop
subgroup 4-16A):
lettuce, spinach
2.4 foliar or
19.2 soil
0.03 foliar or
0.25 soil
3 foliar or
7 soil 0 9.6 foliar or
38.6 soil
0.12 foliar or
0.50 soil
Low growing
berries, except
cranberry and
blueberry, lowbush
(Crop Subgroup 13-
07G)
2.4 foliar or
11 soil
0.03 foliar or
0.14 soil 7 0 foliar
or 14 soil
4.8 foliar or
22 soil
0.06 foliar or
0.29 soil
Peas, succulent
shelled and edible-
podded*
2.4 0.03 5 0 9.6 0.12
Stalk and Stem
Vegetables (Crop
Subgroup 22A):
asparagus, kohlrabi 19.2 0.25 14 0 38.6 0.50
Tobacco* 2.4 foliar or
19.2 soil
0.03 foliar or
0.25 soil 7 7 9.6 foliar or
38.6 soil
0.12 foliar or
0.50 soil

57

Tree Nuts (Crop
Group 14-12)[*]
Almond
Pecan 9.6 0.12 30 30 19.2 0.25
Tropical and
Subtropical Fruit
(Crop Subgroup
24B)[*]
Avocado
Pomegranate
2.4 foliar or
9.6 soil
0.03 foliar or
0.12 soil
14 foliar or
30 soil
1 foliar
or 30 soil
4.8 foliar or
19.2 soil
0.06 foliar or
0.25 soil
Tuberous and Corm
vegetables* (Crop
Subgroup 1C):
potato
2.4 foliar or
9.6 soil
0.03 foliar or
0.12 soil
5 foliar or 10
soil 5 9.6 foliar or
19.2 soil
0.12 foliar or
0.25 soil
* Not for use in California
 [End of Optional Text]

58

Orondis®, the ALLIANCE FRAME
the SYNGENTA Logo and the PURPOSE ICON
are Trademarks of a Syngenta Group Company

©20XX Syngenta

For non-emergency (e.g., current product information), call
Syngenta Crop Protection at 1-866-796-4368.

Manufactured for:
Syngenta Crop Protection, LLC
P.O. Box 18300
Greensboro, North Carolina 27419-8300


Orondis 1571 MAS 0820 AMEND-B 0322-CL - JVB - 3/26/2024
000100-01571.20220331B.ORONDIS.AMEND-0322-CL.pdf