crop-chem-docs/corpus/epa_ppls/19713-679.md

# DREXEL FOMASATE HERBICIDE

- EPA Reg No: **19713-679**
- Registrant: DREXEL CHEMICAL COMPANY
- Signal word: Caution
- Active ingredients: Sodium salt of fomesafen (5.88%); Glyphosate (22.4%)
- Label accepted: 2025-07-10
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/019713-00679-20250710.pdf

---
July 10, 2025
SENT BY EMAIL
Luz Chan
lchan@drexchem.com
DREXEL CHEMICAL COMPANY
Subject: Labeling Notification per Pesticide Registration Notice (PRN) 98-10 - Revised Label
Product Name: DREXEL FOMASATE HERBICIDE
Admin Number: 19713-679
EPA Receipt Date: 04/02/2025
Action Case Number: 00651487
Dear Luz Chan:
The U.S. Environmental Protection Agency is in receipt of your application for notification under Pesticide
Registration Notice 98-10 for the above referenced product. The EPA has conducted a review of this request
for its applicability under PRN 98-10 and finds that the action requested falls within the scope of PRN 98-10.
The labeling submitted with this application has been stamped "Notification" and will be placed in our records.
Should you wish to add/retain a reference to your company’s website on your label, then please be aware that
the website becomes labeling under the Federal Insecticide, Fungicide, and Rodenticide Act and is subject to
review by the EPA. If the website is false or misleading, the product will be considered to be misbranded and
sale or distribution of the product is unlawful under FIFRA section 12(a)(1)(E). 40 CFR § 156.10(a)(5) lists
examples of statements the EPA may consider false or misleading. In addition, regardless of whether a
website is referenced on your product’s label, claims made on the website may not substantially differ from
those claims approved through the registration process. Therefore, should the EPA find or if it is brought to
our attention that a website contains statements or claims substantially differing from statements or claims
made in connection with obtaining a FIFRA section 3 registration, the website will be referred to the EPA’s
Office of Enforcement and Compliance Assurance.
 If you have questions, please contact Jenna Wiegand via email at wiegand.jenna@epa.gov.
Sincerely,
Kable Bo Davis, Senior Advisor 
HB, RD
Office of Pesticide Programs
Kable Bo Davis

Page 1 of 21 
 
 
 
 
 
 
 
 
 
 
For Control of Certain Weeds in Cotton and Soybeans 
 
ACTIVE INGREDIENT: 
 Sodium salt of Fomesafen……………………………………………………………...………………... 5.88% 
 Glyphosate…………………………………………………………………………………………………. 22.40% 
OTHER INGREDIENTS: .............................................................................................................. 71.72% 
 TOTAL: .........................................................................................................................................100.00% 
This product contains 0.56 pound of Fomesafen and 2.26 pounds of Glyphosate expressed as acid equivalent per gallon. 
 
KEEP OUT OF REACH OF CHILDREN 
WARNING / AVISO 
Si usted no entiende la etiqueta, busque para que se la explique a usted en detalle. (If you do not understand the label, 
find someone to explain it to you in detail.) 
 
See FIRST AID Below 
[See Side (Back) Panel for FIRST AID] 
[See Attached Booklet for Complete Directions for Use] 
EPA Reg. No. 19713-679 
EPA Est. No. 19713-XX-X Net Content: ______Gals. (________L) 
FIRST AID 
IF IN EYES: 
• Hold eye open and rinse slowly and gently with water for 15 to 20 minutes. 
• Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. 
• Call a poison control center or doctor for treatment advice. 
IF SWALLOWED: 
• Call a poison control center or doctor immediately for treatment advice. 
• Have person sip a glass of water if able to swallow. 
• Do not induce vomiting unless told to do so by a poison control center or doctor. 
• Do not give anything to an unconscious person. 
IF ON SKIN OR CLOTHING: 
• Take off contaminated clothing. 
• Rinse skin immediately with plenty of water for 15 to 20 minutes. 
• Call a poison control center or doctor for treatment advice. 
IF INHALED: 
• Move person to fresh air. 
• If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth-to-
mouth, if possible. 
• Call a poison control center or doctor for further treatment advice. 
Have the product container or label with you when calling a poison control center or doctor or going for treatment. 
You may also call CHEMTREC at 800-424-9300 for emergency medical treatment information. 
 
679SP-0425*P 
FOMESAFEN GROUP 14 HERBICIDE 
GLYPHOSATE GROUP 9 HERBICIDE 
FomAsateTM 
Herbicide 
19713-679
07/10/2025

Page 2 of 21 
 
PRECAUTIONARY STATEMENTS 
Hazards To Humans And Domestic Animals 
WARNING: Causes substantial but temporary eye injury. Do not get in eyes or on clothing. Wear protective 
eye wear (goggles, face shield or safety glasses). Wash thoroughly with soap and water after handling and 
before eating, drinking, chewing gum, using tobacco or using the toilet. 
PERSONAL PROTECTIVE EQUIPMENT (PPE) 
Applicators and other handlers must wear: Long-sleeved shirt and long pants, chemical -resistant gloves 
such as barrier laminate or viton and shoes plus socks 
USER SAFETY REQUIREMENTS 
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables exist, 
use detergent and hot water. Keep and wash PPE separately from other laundry. 
ENGINEERING CONTROLS 
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed 
in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-6)], the handler PPE 
requirements may be reduced or modified as specified in the WPS. 
 
USER SAFETY RECOMMENDATIONS 
Users should: 1) Wash hands thoroughly with soap and water after handling and before eating, drinking, 
chewing gum, using tobacco or using the toilet. 2) Remove clothing/PPE immediately if pesticide gets inside. 
Then wash thoroughly and put on clean clothing. 3) Remove PPE immediately after handling this product . 
Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean 
clothing. 
 
ENVIRONMENTAL HAZARDS 
For Terrestrial Uses: Do not apply directly to water, or to areas where surface water is present, or to intertidal 
areas below the mean high water mark. Do not contaminate water when disposing of equipment washwater or 
rinsate. Do not apply when weather condit ions favor drift from target area. Drift and runoff may be hazardous to 
aquatic organisms in water adjacent to treated areas. 
 
Surface Water Advisory 
This product may impact surface water quality due to spray drift and runoff of rain water. This is especially true for poorly 
draining soils and soils with shallow ground water. This product is classified as having high potential for reaching surface 
water via runoff for several months after application. A level, well-maintained vegetative buffer strip between areas to which 
this product is applied and surface water features such as ponds, streams, and springs will reduce the potential loading of 
fomesafen from runoff water and sediment. Runoff of this product will be reduced by avoiding applications when rainfall is 
forecasted to occur within 48 hours. For more information, see the United States Department of Agriculture National 
Resource Conservation Services Manual, Conservation Buffers to Reduce Pesticide Losses. 
 
Groundwater Advisory 
Fomesafen is known to leach through soil into groundwater under certain conditions as a result of label use. This chemical 
may leach into groundwater if used in areas where soils are permeable, particularly where the water table is shallow. 
 
Non-target Organism Advisory Statement: 
This product is toxic to plants and may adversely impact the forage and habitat of non-target organisms, including 
pollinators, in areas adjacent to the treated site. Protect the forage and habitat of non-target organisms by following label 
directions intended to minimize spray drift. 
 
PHYSICAL AND CHEMICAL HAZARDS 
Do not store, mix or apply this product or spray solutions of this product in unlined steel (except stainless steel), galvanized 
steel containers, or spray tanks. This product or spray solutions of this product will react with these containers and tanks 
and produce hydrogen gas which may form a highly combustible mixture. This gas mixture could flash or explode, causing 
serious personal injury, if ignited by spark, open flame, lighted cigarette, welder torch, or other ignition source. 
 
Spray solutions of this product must be mixed, stored and applied using only stainless steel, fiberglass, plastic, or plastic -
lined steel containers.

Page 3 of 21 
 
 
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
 
Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only 
protected handlers may be in the area during application. For any requirements specific to your State or Tribe, 
consult the agency responsible for pesticide regulation. 
 
Ground and aerial application rates on the labels must not exceed the maximum application parameters as 
noted in Appendix C of this document, which were maximum application parameters assessed by the EPA. 
Application rates may only be clarified for uses that are currently approved on labels . 
 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard (WPS), 40 
CFR Part 170. This standard contains requirements for the protection of agricultural workers on farms, 
forests, nurseries, greenhouses and handlers of agricultural pesticides. It contains requirements for training, 
decontamination, notification and emergency assistance. It also contains specific instructions and exceptions 
pertaining to the statements on this label about personal protective equipment (PPE). The requirements in 
this box only apply to uses of this product that are covered by the WPS. 
Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 24 
hours. 
PPE required for early entry to treated areas that is permitted under the WPS and that involves contact with 
anything that has been treated, such as plants, soil or water is: Coveralls, chemical-resistant gloves such as 
barrier laminate or viton and shoes plus socks. 
 
PRODUCT INFORMATION 
Glyphosate works by targeting an enzyme that is essential for plant growth. 
 
Read all label directions before using this product. 
 
This product may be used as a pre- plant or pre- emergence burndown herbicide in Cotton or as a post -
emergence directed application in glyphosate tolerant (GT) C otton* and as a pre- plant or pre- emergence 
burndown herbicide in Soybeans or as a post-emergence over-the-top application in glyphosate tolerant (GT) 
Soybeans** to control labeled broadleaf, grass and sedge weeds. 
 
 *This product may be used on the following glyphosate tolerant Cotton only: Roundup Ready® Flex Cotton. 
**This product may be used on the following glyphosate tolerant Soybeans only: all Roundup Ready Soybeans including 
Roundup Ready 2 Yield Soybeans and all Genuity brand Soybeans which includes Roundup Ready 2. 
 
Environmental and Agronomic Conditions 
Always apply this product under favorable environmental conditions that promote active weed growth. Avoid 
applying this product to weeds or labeled crops which are under stress from drought, extreme temperatures, 
excessive water, low humidity, low soil fertility, mechanical or chemical injury as reduced weed control and/or 
increased crop injury may result. 
 
Pre-plant Surface, Pre-emergence and Post-emergence Applications 
This product will control or partially control certain germinating broadleaf weeds and sedges by soil residual 
activity from either pre-plant surface, pre-emergence or post-emergence applications that come in contact with 
the soil. Moisture is necessary to activate this product in soil for residual weed control. Dry weather following 
applications of this product may reduce effectiveness. When adequate moisture is not received 7 days after an 
application of this product, weed control may be improved by overh ead irrigation with at least a 1/4 inch of 
water.

Page 4 of 21 
 
 
Cultivation 
Cultivation prior to post-emergence application is not recommended. Cultivation may put weeds under stress, 
thus reducing weed control. Timely cultivation 2 to 3 weeks after applying this product may assist weed control. 
 
RESISTANCE MANAGEMENT 
 
 
 
 
For resistance management, this product is a Group 9 and 14 modes of action herbicide. Any weed population 
may contain or develop plants naturally resistant to this product and other Group 9 and 14 modes of action 
herbicides. The resistant biotypes may dominate the weed population if these herbicides are used repeatedly 
in the same field. Appropriate resistance management strategies should be followed. 
 
To delay herbicide resistance, take one or more of the following steps: 
• Rotate the use of this product or other Group 9 and 14 herbicides within a growing season sequence or 
among growing seasons with different herbicide groups that control the same weeds in a field. 
• Use tank mixtures with herbicides from a different group if such use is permitted; where information on 
resistance in target weed species is available, use the less resistance-prone partner at a rate that will control 
the target weed(s) equally as well as the more resistance-prone partner. Consult your local extension service 
or certified crop advisor if you are unsure as to which active ingredient is currently less prone to resistance. 
• Adopt an integrated weed-management program for herbicide use that includes scouting and uses historical 
information related to herbicide use and crop rotation, and that considers tillage (or other mechanical control 
methods), cultural ( e.g., higher crop seeding rates; precision fertilizer application method and timing to favor 
the crop and not the weeds), biological (weed- competitive crops or varieties) and other management 
practices. 
• Scout after herbicide application to monitor weed populations for early signs of resistance development. 
Indicators of possible herbicide resistance include: (1) failure to control a weed species normally controlled 
by the herbicide at the dose applied, especially if control is achieved on adjacent weeds; (2) a spreading 
patch of non- controlled plants of a particular weed species; (3) surviving plants mixed with controlled 
individuals of the same species. If resistance is suspected, prevent weed seed production in the affected area 
by an alternative herbicide from a different group or by a mechanical method such as hoeing or tillage. Prevent 
movement of resistant weed seeds to other fields by cleaning harvesting and tillage equipment when moving 
between fields, and planting clean seed. 
• If a weed pest population continues to progress after treatment with this product, discontinue use of this 
product, and switch to another management strategy or herbicide with a different mode of action, if available. 
• Contact your local extension specialist or certified crop advisors for additional pesticide resistance-
management and/or integrated weed-management recommendations for specific crops and weed biotypes. 
• For further information or to report suspected resistance, contact Drexel Chemical Company representatives 
at (901) 774-4370. 
 
APPLICATION DIRECTIONS 
 
Drift Management 
Refer to the “SPRAY DRIFT” section at the end of this label. 
 
Spray Adjuvants 
Only spray additives cleared for use on growing crops under 40 CFR 180.910 may be used in the spray mixture. 
 
Under certain conditions, burndown and post-emergence activity may be improved by adding one or more of 
the following spray adjuvants: 
 
Ammonium Sulfate (AMS) at 8.5 to 17 pounds per 100 gallon of water should be added in areas where 
commonly used with glyphosate-containing products. Liquid formulations of AMS may be used at an equivalent 
rate. 
FOMESAFEN GROUP 
14 HERBICIDE 
GLYPHOSATE GROUP 9 HERBICIDE

Page 5 of 21 
 
 
Urea Ammonium Nitrate (UAN) (28-32% liquid nitrogen solution) may be added at 1 to 2.5% volume to volume 
(v/v) (1 to 2.5 gals. per 100 gals.) of finished spray volume. If AMS is being added, UAN is generally not required. 
UAN can improve weed control but may reduce crop tolerance. 
 
One of the following spray adjuvants can be added for difficult to control we eds or under adverse 
environmental conditions: 
 
Crop Oil Concentrate (COC) or Methylated Seed Oil (MSO): Use a non-phytotoxic COC or MSO containing 
15 to 20% approved emulsifier at 0.5 to 1% v/v (2 to 4 qts. per 100 gals.) of finished spray volume. COC or 
MSO can improve weed control but may slightly reduce crop tolerance. 
 
Nonionic Surfactant (NIS): Use NIS containing at least 80% active ingredient at 0.25 to 0.5% v/v (1 to 2 qts. 
per 100 gals.) of finished spray volume. 
 
The use of deposition (drift control) agents that impact droplet size and coverage may reduce weed control . 
 
Note: No adjuvants are needed for pre- plant or pre-emergence applications unless this product is being used 
in a burndown. 
 
Mixing Order 
1. Fill spray tank with one-half to two-thirds the required amount of water and begin agitation. 
2. Add AMS (if used). 
3. Add dry pesticide formulations (WP, DF, etc.). 
4. Add liquid pesticide formulation (EC, SC etc.). 
5. Add This Product. 
6. Add COC, MSO or NIS (if used). 
7. Add remainder of water and then maintain constant agitation throughout the spray operation. 
 
Be sure to allow each tank mix component to fully disperse before adding the next. 
 
Tank Mix Compatibility Test 
A jar test is recommended prior to tank mixing to ensure compatibility of this product with mixture partners. Add 
proportion amounts of tank mixture components in a clear quart jar one at a time in the specified mixing order. 
Gently shake or invert capped jar and let stand for 15 to 30 minutes. If the mixture clumps, forms flakes, oily 
films or layers or other precipitates, it is not compatible and the tank mixture should not be used. 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. 
Read and follow the applicable restrictions and limitations and directions for use on all product labels 
involved in tank mixing. Users must follow t he most restrictive directions for use and precautionary 
statements of each product in the tank mixture. 
 
MANDATORY SPRAY DRIFT MANAGEMENT 
AERIAL AND GROUND BOOM 
GROUND APPLICATION 
 
Use sufficient spray volume and pressure to ensure complete coverage of the target . A spray volume of 10 to 
20 gallons per acre and 30 to 60 psi at the nozzle tip is recommended. When foliage is dense, use a minimum 
of 20 gallons per acre to ensure coverage of weed foliage. 
 
The use of flat fan nozzles will result in the most effective post -emergence application of this product. Use 
nozzles that are set up to deliver medium quality spray (ASAE Standard S-572). 
 
Do not use air-induction, flood type or other spray nozzles which deliver coarse, large droplet sprays.

Page 6 of 21 
 
 
AERIAL APPLICATION 
Use sufficient spray volume and pressure to ensure complete coverage of the target. A minimum of 5 gallons 
per acre of spray mixture should be applied with a maximum of 40 psi pressure. When broadleaf weed foliage 
is dense, use a minimum of 10 gallons per acre to ensure coverage of weed foliage. 
Do not apply this product through any type of irrigation system. 
 
USE RESTRICTIONS 
 
• A maximum of 5.3 pints of this product (or a maximum of 0.375 Ib. a.i. per acre of Fomesafen from any 
product containing Fomesafen) may be applied per acre per year in Region 1 (see “REGIONAL USE MAP”). 
 
• A maximum of 5.3 pints of this product (or a maximum of 0.375 Ib. a.i. per acre of Fomesafen from any 
product containing Fomesafen) may be applied per acre in ALTERNATE years in Region 2 (see “REGIONAL 
USE MAP”). 
 
• A maximum of 4.5 pints of this product (or a maximum of 0.315 Ib. a.i. per acre of Fomesafen from any 
product containing Fomesafen) may be applied per acre in ALTERNATE years in Region 3 (see “REGIONAL 
USE MAP”). 
 
• A maximum of 3.5 pints of this product (or a maximum of 0.25 Ib. a.i. per acre of Fomesafen from any product 
containing Fomesafen) may be applied per acre in ALTERNATE years in Region 4 (see “REGIONAL USE 
MAP”). 
 
• A maximum of 3.5 pints of this product (or a maximum of 0.25 Ib. a.i. per acre of Fomesafen from any product 
containing Fomesafen) may be applied per acre in ALTERNATE years in Region 4a (see “REGIONAL USE 
MAP”). Apply only to Soybeans in Region 4a. Do not make an application of this product later than June 
20
th. Cumulative rainfall plus overhead irrigation must total 15 inches from the period of an application of this 
product to Soybean crop maturity to allow planting of rotation crops listed in this label (refer to “ROTATIONAL 
CROP RESTRICTIONS” section). If the Soybean crop is lost or the required cumulative rainfall plus irrigation 
is not received as outlined above, plant only Soybeans the following growing season. 
 
• A maximum of 2.68 pints of this product (or a maximum of 0.1875 Ib. a.i. per acre of Fomesafen from any 
product containing Fomesafen) may be applied per acre in ALTERNATE years in Region 5 (see “REGIONAL 
USE MAP”). 
 
USE PRECAUTIONS 
 
• Thoroughly clean the spray system with water and a commercial tank cleaner before and after each use to 
avoid injury to desirable plants. 
 
• Tank mixes of this product with other pesticides, fertilizers or any other additives except as specified on this 
label or other approved supplemental labels may result in tank mix incompatibility, unsatisfactory 
performance or unacceptable crop injury. 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended 
use. Read and follow the applicable restrictions and limitations and directions for use on all product 
labels involved in tank mixing. Users must follow the most restrictive directions for use and 
precautionary statements of each product in the tank mixture. 
 
• Avoid overlapping spray swaths as injury may occur in crop or to rotational crops. 
 
• Heavy rainfall or irrigation shortly after application may reduce performance. 
 
• Optimum coverage will occur when the ground speed does not exceed 10 mph during application.

Page 7 of 21 
 
• Severe damage or destruction may be caused by contact of this product to any desirable crop or plant to 
which treatment is not intended. 
 
• Spray solutions containing this product must be mixed stored and applied using only plastic, plastic -lined 
steel, stainless steel or fiberglass containers. Concentrate must not be stored in galvanized, carbon steel, 
aluminum or unlined steel containers. 
 
REPLANTING 
If replanting is necessary in fields previously treated with this product, the field may be replanted to Cotton, Dry 
beans, Potatoes, Snap beans or Soybeans. Do not apply a second application of this product or other products 
containing Fomesafen as crop injury or illegal residues may occur in harvested crops. If tank mix combinations 
were used, refer to product labels for any additional replanting instructions. 
 
ROTATIONAL CROP RESTRICTIONS 
This product may be applied during fallow intervals preceding planting, prior to planting or transplanting, at -
planting, or preemergence to annual and perennial crops listed on this label, except where specifically limited. 
For any crop not listed on this label, application must be made a minimum 30 days prior to planting. 
 
Do not graze rotated small grain crops or harvest forage or straw for livestock. 
The following rotational crops may be planted after applying this product at specified rates: 
 
Rotational Crops Minimum Rotation Interval 
(Time From Last Application) 
Bean, Dry 
Bean, Snap 
Cotton 
Potato 
Soybean 
Soybean, Succulent (Edamame) 
0 days 
Bean, Lima 
Pea, Succulent 
Small grains such as Barley, Rye, Wheat 
4 months 
Corn, Field 
Corn, Seed 
Corn, Sweet5 
Peanut 
Pepper (Transplanted)1 
Popcorn 4 
Pumpkin2 
Rice 
Tomato (Transplanted)1 
Watermelon2 
10 months 
Bean, Succulent (other than Edamame, Lima bean 
and Snap bean) 
Cantaloupe 2 
Cucumber2 
Edible-podded beans and peas not otherwise 
specified on this table 
Eggplant 
Pea, Dry 
Pepper (Direct-seeded) 
Squash 2 
Sunflower 
Sweet Potato 
Tomato (Direct-seeded) 
12 months 
Sorghum3 18 months

Page 8 of 21 
 
All other crops not listed above 
 
18 months 
 
1 4 months in Region 1 
2 8 months in Region 1 
3 10 months in Region 1 
4 Use 12 months in the states of Illinois, Indiana, Iowa, Kentucky, Ohio and Region 4a when applied at a rate of 3.5 pints 
per acre or more. 
518 months in the states of Connecticut, Maine, Massachusetts, New Hampshire, New York, Rhode Island, Vermont 
and Region 5 
 
USE RATES OF THIS PRODUCT AND WEEDS CONTROLLED 
 
Refer to Map for Definition of Specified Geographic Regions. 
 
REGIONAL USE MAP 
 
 
 
REGION 1 
(Maximum Rate: 5.3 Pints per Acre per Year)

Page 9 of 21 
 
REGION 1 - Includes the following states or portion of states where this product may be applied: Alabama, 
Arkansas, Florida (except Miami -Dade County), Georgia, Louisiana, Mississippi, Missouri (Counties of 
Bollinger, Butler, Cape Girardeau, Dunklin, Madison, Mississippi, New Madrid, Pemiscot, Perry, Ripley, S cott, 
Stoddard and Wayne), North Carolina, Oklahoma (East of U.S. Highway 75 and East of Indian Nation Parkway), 
South Carolina, Tennessee and Texas (includes areas East of U.S. Highway 77 to State Road 239 including 
all of Calhoun County). 
 
 
 
REGION 2 
(Maximum Rate: 5.3 Pints per Acre, Alternate Years) 
 
 
 
 
REGION 2 - Includes the following states or portion of states where this product may be applied: Delaware, 
Kentucky, Maryland, Virginia and West Virginia. South of Interstate 70 in the following states: Illinois, Indiana 
and Ohio and in Pennsylvania (all areas South of Interstate 80 to the intersection of U.S. Highway 15 and East 
of U.S. Highway 15 and U.S. Highway 522 in Pennsylvania). 
 
 
REGION 3 
(Maximum Rate: 4.5 Pints per Acre, Alternate Years)

Page 10 of 21 
 
 
REGION 3 - Includes the following states or portion of states where this product may be applied: Connecticut, 
Iowa, Maine, Massachusetts, Missouri (all counties except for those listed in Region 1), New Hampshire, New 
Jersey, New York, Pennsylvania (all areas except those listed in Region 2), Rhode Island, Vermont, Wisconsin 
(South of U.S. Highway 18 between Prairie Du Chien and Madison, and South of Interstate 94 between Madison 
and Milwaukee) and North of Interstate 70 in the following states: Illinois, Indiana and Ohio. 
 
 
REGION 4 
(Maximum Rate: 3.5 Pints per Acre, Alternate Years) 
 
 
 
 
 
 
REGION 4 - Includes the following states or portion of states where this product may be applied: Kansas (all 
counties East of or intersected by U.S. Highway 281), Michigan (Southern Peninsula), Minnesota (all areas 
South of Interstate 94), Nebraska (all counties East of or intersected by U.S. Highway 281), North Dakota (all 
areas East of Interstate 29 from Fargo South to the South Dakota state line). South Dakota (all areas East of 
Interstate 29 from the North Dakota state line to Watertown, all areas East of Highway 81 from Watertown to 
Madison and all areas East and South of State Road 34 and U.S. Highway 281 to the Nebraska state line) and 
Wisconsin (all areas south of Interstate 94 all areas, except those in Region 3, from Minnesota state line to Eau 
Claire and South of U.S. Highway 29 from Eau Claire to Green Bay plus Barron, Burnett, Chippewa, Clark, 
Door, Dunn, Eau Claire, Kewaunee, Langlade, Lincoln, Marathon, Marinette, Menominee, Oconto, Polk, Price, 
Rusk, Sawyer, Shawano, St. Croix, Taylor and Washburn counti es. The following counties are excluded: 
Adams, Marquette, Portage, Waupaca, Waushara and Wood).

Page 11 of 21 
 
 
REGION 4a 
(Maximum Rate: 3.5 Pints per Acre, Alternate Years) 
 
 
 
 
REGION 4a* - Includes the following states or portion of states where this product may be applied: Kansas (all 
areas west of U.S. Highway 281 to the Colorado state line), Nebraska ( all areas that intersect west of U.S. 
Highway 281 and east of U.S. Highway 83). 
 
*Note: Refer to the “USE PRECAUTIONS” section for additional requirements that must be followed to 
use this product at the rate of 3.5 pints per acre in Region 4a. 
 
 
 
REGION 5 
(Maximum Rate 2.68 Pints per Acre, Alternate Years) 
 
 
 
REGION 5 - Includes the following states or portion of states where this product may be applied: Minnesota (all 
areas South of U.S. Highway 2 except those areas in Region 4) plus Betrami, Clearwater, Lake of the Woods, 
Kittson, Marshall, Pennington, Polk, Red Lake and Roseau, North Dakota (all areas East of U.S. Highway 281 
except those areas in Region 4) and South Dakota (all areas East of U.S. Highway 281 except those areas in 
Region 4).

Page 12 of 21 
 
WEEDS CONTROLLED 
 
TABLE 1. Weeds controlled or partially controlled by pre- plant surface or pre- emergence application of this 
product at 3.5 to 5.3 pints per acre*. 
 
Broadleaf Weeds - Controlled Soil Texture Organic Matter 
Amaranth, Palmer All soil types Up to 5% 
Croton, Tropic** 
Eclipta 
Galinsoga species 
Lambsquarters, Common 
Morningglory, Small flower 
Nightshade, Black 
Nightshade, Eastern black 
Pigweed, Redroot 
Pigweed, Smooth 
Poinsettia, Wild 
Purslane, Common 
Ragweed, Common** 
Sida, Prickly** 
Starbur, Bristly 
Broadleaf Weeds - Partial Control*** 
Anoda, Spurred 
Cocklebur, Common 
Morningglory, Entireleaf 
Morningglory, Ivyleaf 
Morningglory, Pitted (Small white) 
Morningglory, Red (Scarlet) 
Morningglory, Tall (Common) 
Nightshade, Hairy 
Ragweed, Giant 
Waterhemp species 
Sedge - Partial Control*** 
Nutsedge, Yellow 
 *Use the higher end of the rate range when heavy weed populations are anticipated. 
 **Rates less than 5.3 pints per acre will provide only partial control of this weed. 
***Partial control means significant activity but not always at a level considered acceptable for commercial weed control.

Page 13 of 21 
 
TABLE 2. Broadleaf weeds controlled by post-emergence application of this product. 
 
 
 
Broadleaf Weeds Controlled1 
Use Rate of This Product (Pts./Acre) 
Maximum Growth Stage Controlled At 
3.5 Pts./Acre 
No. of True Leaves 
4.5 Pts./Acre 
No. of True Leaves 
5.3 Pts./Acre 
No. of True Leaves 
Amaranth, Palmer 
(glyphosate susceptible) 
4 4 6 
Amaranth, Palmer 
(glyphosate resistant)1 
1 2 3 
Amaranth, Spiny 2 2 4 
Anoda, Spurred 4 6 8 
Buttercup species2 6 8 10 
Carpetweed 6" Diameter size Multi-leaf 
6” Diameter 
Unlimited size 
Chickweed, Common 6 8 10 
Chickweed, Mouseear 6 8 10 
Citronmelon (Wild watermelon) 2 4 6 
Cocklebur, Common 4 6 8 
Copperleaf, Hophornbeam 2 2 4 
Copperleaf, Virginia 2 2 4 
Crotalaria, Showy 4 6 8 
Croton, Tropic 2 4 6 
Cucumber, Volunteer 2 4 6 
Deadnettle, Purple 4 6 8 
Eclipta 6 8 10 
Eveningprimrose, Cutleaf 4 6 8 
Groundcherry, Cutleaf 4 6 6 
Henbit 4 6 8 
Jimsonweed 4 6 8 
Lambsquarters, Common 4 8 10 
Morningglory: 
 Cypressvine 4 4 6 
 Entireleaf var. 3 3 4 
 Ivyleaf 3 3 4 
 Purple moonflower 3 4 4 
 Red (Scarlet) 3 3 4 
 Small flower 3 3 4 
 Pitted (Small white) 4 4 4 
 Tall (Common) 3 3 4 
 Palmleaf (Willowleaf) 3 3 4 
Mustard, Wild 6 8 10 
Nightshade, Black 4 6 8 
Pigweed: 
 Redroot 4 6 6 
 Smooth 4 4 6 
(Continued)

Page 14 of 21 
 
(Continuation) 
Poinsettia, Wild 4 6 8 
Purslane, Common Multi-leaf 4” 
Diameter 
Multi-leaf 
6" diameter 
Multi-leaf 
8" diameter 
Pusley, Florida 4 6 8 
Ragweed, Common 
(glyphosate susceptible) 
4 5 6 
Ragweed, Common 
(glyphosate resistant)1 
2 4 5 
Ragweed, Giant 
(glyphosate susceptible) 
4 6 8 
Ragweed, Giant 
(glyphosate resistant)1,3 
2 2 4 
Redweed 4 6 8 
Sesbania, Hemp 6 8 10 
Shepherdspurse 6 8 10 
Sicklepod 2 3 4 
Sida, Prickly 2 3 4 
Smartweed, Ladysthumb 4 6 8 
Smartweed, Pennsylvania 4 6 8 
Spurge, Prostrate 4 6 8 
Spurge, Spotted 4 6 8 
Starbur, Bristly 4 6 8 
Sunflower, Common 4 6 8 
Velvetleaf 4 6 8 
Venice mallow 4 4 6 
Waterhemp species 
(glyphosate susceptible) 
2 4 6 
Waterhemp species 
(glyphosate resistant)1 
2 3 4 
Yellow rocket 6 8 10 
1Weed biotypes that have multiple resistance to both glyphosate and protoporphyrinogen oxidase inhibitor herbicides will 
not be controlled by this product. See your local company representative and or university recommendations for control 
programs. 
2Control will be reduced at the button stage. 
3Partial control of glyphosate resistant Giant ragweed. See your local company representative and or university extension 
recommendations for control programs. (Partial control means significant activity but not always at a level considered 
acceptable for commercial weed control.)

Page 15 of 21 
 
TABLE 3. Grasses controlled by post-emergence applications of this product. 
 
Grass Weeds Controlled* 
Use Rate of This Product (Pts./Acre) 
Maximum Growth Stage Controlled At 
3.5 Pts./Acre 
Maximum Height 
(inches) 
4.5 Pts./Acre 
Maximum Height 
(inches) 
5.3 Pts./Acre 
Maximum Height 
(inches) 
Barley, Volunteer 24 - - 
Barnyardgrass 6 10 12 
Bluegrass, Annual 12 - - 
Corn, Volunteer 
(glyphosate susceptible) 
24 - - 
Crabgrass species 12 - - 
Foxtail species 18 - - 
Goosegrass 6 8 12 
Johnsongrass, Seedling* 12 18 - 
Oats, Volunteer 18 - - 
Oats, Wild 18 - - 
Panicum, Browntop 10 18 - 
Panicum, Fall 6 10 - 
Panicum, Texas 10 18 - 
Red rice 3 - - 
Rye, Volunteer 12 18 - 
Ryegrass, Italian (Annual)* 8 10 - 
Shattercane 12 16 - 
Sprangletop species 18 - - 
Signalgrass, Broadleaf 8 10 - 
Wheat, Volunteer 18 - - 
Wild proso millet 12 16 - 
Witchgrass 12 - - 
Woolly cupgrass 12 - - 
*This product will not control glyphosate resistant seedling Johnsongrass and Italian ryegrass biotypes or other 
glyphosate resistant grass species. 
 
COTTON 
 
Burndown and Residual Weed Control Applications 
This product can provide burndown of emerged weeds and residual control of certain germinating broadleaf 
weeds and sedges in Cotton. 
 
Application to Coarse Textured Soils 
Apply this product 3.5 to 5.3 pints per acre as a pre-plant surface or pre-emergence application to coarse 
textured soils (sandy loam, loamy sand, sandy clay loam) only. Refer to Table 1 for use rates and weeds 
controlled by pre-plant surface or pre-emergence applications and Tables 2 and 3 for use rates, weed growth 
stages and weeds controlled by post-emergence applications.

Page 16 of 21 
 
Application to Medium or Fine Textured Soils 
Apply this product at 3.5 pints per acre as a pre- plant surface application to medium or fine textured soils (i.e. 
soil types heavier than coarse textured soils) up to 21 days prior planting Cotton. Apply after the last tillage 
operation is completed. 
Refer to Table 1 for weeds controlled by pre-plant surface applications and Tables 2 and 3 for weed growth 
stages and weeds controlled by post-emergence applications. To avoid severe crop injury, the following use 
directions must be followed when applications are made to medium or fine textured soils: 
• After application of this product, a minimum of 0.5 inch of rainfall or overhead irrigation must occur before 
planting Cotton. 
• Cotton must be planted at least 0.75 inch in depth. 
• Avoid overlapping spray swaths. 
• Do not disturb or re-work the seedbed following application. 
 
The use of an in- furrow or seed applied fungicide will generally assist with seedling establishment and 
development. 
 
Use Restriction: Do not exceed 3.5 pints per acre of this product on medium or fine textured soils. 
 
Use Directions for Burndown and Residual Weed Control Applications 
Emerged weeds must receive thorough spray coverage for effective control. Refer to the “ SPRAY 
ADJUVANTS” section for directions on spray adjuvants for post-emergence weed control. 
Moisture is necessary to activate this product in soil for residual weed control. Dry weather following application 
of this product may reduce residual activity. When adequate moisture is not received within 7 days after an 
application of this product, res idual weed control may be improved with at least a one- fourth inch of overhead 
irrigation. 
 
Cotton plants are tolerant to this product when applied at specified rates and application use directions. Some 
crinkling or spotting of Cotton foliage or stunting may occur but Cotton plants normally outgrow these effects 
and develop normally. 
 
Tank Mixes for Burndown and Residual Weed Control Applications 
This product may be applied in tank mix with the following products: 
 
Diuron (Direx®, Karmex®) 
Dicamba (Banvel®, Clarity®) 
Fluometuron (Cotoran®) 
Glyphosate 
Norflazuron (Solicam®) 
Pendimethalin (Prowl®) 
Prometryn (Caparol®) 
Pyrithiobac (Staple®) 
 
 
Note: It is the pesticide user’s responsibility to ensure that ALL PRODUCTS in the listed tank mixtures 
are registered for the intended use. Read and follow the applicable restrictions and limitations and 
directions for use on all product labels involved in tank mixing. Users must follow the most restrictive 
directions for use and precautionary statements of each product in the tank mixture. 
 
Post-Directed Application in Roundup Ready Flex Cotton 
Apply this product in emerged Roundup Ready Flex Cotton as a post-directed treatment using precision post -
directed, hooded or shielded application equipment to provide complete coverage of emerged weeds. Apply 
this product at 3.5 pints per acre in a minimum of 15 gallons spray solution per acre. Applications may be made 
broadcast or banded. Post -directed applications of this product will provide contact control of labeled weeds 
and residual pre-emergence control of labeled weeds (once activated by rainfall or irrigation). Refer to the Table 
1 for weeds controlled or partially controlled through residual activity and Tables 2 to 3 for weeds controlled by 
post-emergence activity. 
Cotton foliage is not tolerant to applications of this product. Avoid contact to Cotton foliage as unacceptable 
injury will occur. Calibrate application equipment (spray pressure, nozzle type and configuration, and orifice 
size) to avoid fine spray droplets contacting green Cotton stems and foliage. 
 
Use Restriction: Do not exceed 3.5 pints per acre as a post -directed application in Roundup Ready Flex 
Cotton.

Page 17 of 21 
 
Post-Directed Application Timing in Roundup Ready Flex Cotton 
This product may be applied as a post -directed application to Roundup Ready Flex Cotton when Cotton is at 
least 6 inches in height through layby. Keep all post-directed applications from contacting any green non-barked 
parts of the Cotton plant or foliage as unacceptable injury will occur. Follow the application timing 
recommendations below for post-directed applications in Roundup Ready Flex Cotton. 
Shield and Hooded Applications 
Make a precision post -directed application of this product to the base of the Cotton plant avoiding contact 
with the Cotton stem or foliage when Cotton is at least 6 inches in height to avoid Cotton injury. Use only 
hooded or shielded spray equipment to apply this product in Cotton that is 6 inches height. Adjust nozzles 
to provide full coverage of emerged target weeds. 
Layby Applications 
Make a post -directed application of this product to the base of the Cotton plant avoiding contact with any 
non-barked portion of the Cotton plant or foliage. Use precision post -directed equipment or hooded or 
shielded sprayers on Cotton that has developed a minimum of 4 inches of brown bark through layby. 
Application equipment should be configured to provide full coverage of emerged target weeds. 
 
Tank Mixes for Post-Directed Applications 
This product can be applied in tank mix combination with most Cotton herbicides which are labeled for post -
directed, hooded or shielded applications. Refer to individual product labels for precautionary statements, 
restrictions, rates and a list of weeds controlled. 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. 
Read and follow the applicable restrictions and limitations and directions for use on all product labels 
involved in tank mixing. Users must follow t he most restrictive directions for use and precautionary 
statements of each product in the tank mixture. 
 
Use Restrictions - Cotton 
• Do not apply this product over the top of Cotton as plant death will occur. 
• Do not exceed 5.3 pints of this product per acre in any one year and also adhere to the maximum rate that 
may be applied in each geographic region (refer to the “REGIONAL USE MAP”). 
• Do not apply more than 3.5 pints of this product as a pre-plant surface application to medium or fine textured 
soils. 
• Do not apply more than 3.5 pints of this product per acre as a post-directed application. 
• Do not apply this product later than 70 days before harvest. 
 
SOYBEANS 
 
Burndown and Residual Weed Control Applications – Glyphosate tolerant and Non-Glyphosate tolerant 
Soybeans 
This product can provide burndown of emerged weeds and residual control of certain germinating broadleaf 
weeds and sedges from either a pre-plant surface or pre-emergence application in Soybeans. 
 
Refer to Table 1 for rates and weeds controlled by pre-plant surface or pre-emergence applications and Tables 
2 and 3 for rates, weed growth stages and weeds controlled by post-emergence applications. 
 
Emerged weeds must have thorough spray coverage for effective control. Refer to the “SPRAY ADJUVANTS” 
section for directions on spray adjuvants for post-emergence weed control. 
 
Moisture is necessary to activate this product in soil for residual weed control. Dry weather following application 
of this product may reduce effectiveness of residual activity. When adequate moisture is not received within 7 
days after an application of this product, residual weed control may be improved with at least a ¼ inch of 
overhead irrigation.

Page 18 of 21 
 
Pre-plant Surface and Pre-emergence Tank Mix Application 
This product can be tank mixed with the following products for pre-plant surface or pre-emergence applications 
in glyphosate and non-glyphosate tolerant Soybeans: 
2,4-D Dicamba Glyphosate 
 
Note: It is the pesticide user’s responsibility to ensure that ALL PRODUCTS in the listed tank mixtures 
are registered for the intended use. It is the pesticide user’s responsibility to ensure that all products 
are registered for the intended use. Read and follow the applicable restrictions and limitations and 
directions for use on all product labels involved in tank mixing. Users must follow the most restrictive 
directions for use and precautionary statements of each product in the tank mixture. 
 
Post-emergence Over-The-Top Applications in Glyphosate tolerant Soybeans 
This product can provide post-emergence control of a broad spectrum of grass and broadleaf weeds as an 
over-the-top application in glyphosate tolerant Soybeans. Refer to Tables 2 and 3 for specific directions on 
weed growth stages, rates and weeds controlled. Emerged weeds must have thorough spray coverage for 
effective control. Refer to the “SPRAY ADJUVANTS ” section for directions on spray adjuvants for post -
emergence weed control. 
 
Post-emergence, in-crop applications of this product that come in contact with soil may control or partially 
control certain germinating broadleaf weeds and sedges. 
 
Some bronzing, crinkling or spotting of Soybean leaves may occur following post-emergent applications, but 
Soybeans soon outgrow these effects and develop normally. 
 
Post-emergence Split Application Program for Glyphosate tolerant Soybeans in Region 1 and 2 
A post-emergence split application of this product may be applied in Regions 1 and 2. Apply this product at 2.65 
pints per acre with methylated seed oil (MSO) adjuvant at 1% v/v when weeds are 1 to 2 inches in height 
followed by a second application of this product at 2.6 5 pints per acre with MSO at 1% v/v when re- growth or 
newly emerged weeds are 1 to 2 inches in height (approximately 10 to14 days after the first application). The 
total amount of this product in the split application program cannot exceed 5.3 pints per acre. 
 
Special Post-emergence Use Rate for Specific Weed Control Situations for Glyphosate tolerant 
Soybeans in Regions 1, 2, 3 and 4 
This product may be applied at 2.8 pints per acre in Regions 1, 2, 3 and 4 as a post-emergence application to 
control non- glyphosate resistant weeds including difficult to control weeds such as Black nightshade, 
Morningglory, Velvetleaf and in glyphosate tolerant Soybeans. Apply when weeds are 1 to 4 inches in height. 
 
Special Post-emergence Use Rate for Specific Weed Control Situations for Glyphosate tolerant 
Soybeans in Region 5 
This product may be applied at 2.68 pints per acre in Region 5 as a post-emergence application to control non-
glyphosate resistant weeds including difficult to control weeds such as B lack nightshade and V elvetleaf in 
glyphosate tolerant Soybeans. Apply when weeds are 1 to 3 inches in height. 
 
Post-emergence Over-The-Top Tank Mix Applications – Glyphosate tolerant Soybeans Only 
This product can be tank mixed with the following products for post -emergence applications in glyphosate 
tolerant Soybeans: 
Fenoxaprop (Fusion®) 
Fluazifop (Fusilade®) 
Glyphosate 
Metolachlor (Dual Magnum®)

Page 19 of 21 
 
 
Note: It is the pesticide user’s responsibility to ensure that ALL PRODUCTS in the listed tank mixtures 
are registered for the intended use. It is the pesticide user’s responsibility to ensure that all products 
are registered for the intended use. Read and follow the applicable restrictions and limitations and 
directions for use on all product labels involved in tank mixing. Users must follow the most restrictive 
directions for use and precautionary statements of each product in the tank mixture. 
 
Use Restrictions - Soybeans 
• Do not apply this product as an over-the-top application to non-glyphosate tolerant Soybeans as plant death 
will occur. 
 
• Refer to the “REGIONAL USE MAP” for maximum rate of this product (or other Fomesafen containing 
products) that may be applied in each geographic region. Do not apply to any field in Regions 2, 3, 4 or 5 
more than once every two years. 
 
• Do not exceed 5.3 pints of this product per acre in any one year and also adhere to the maximum rate that 
may be applied in each geographic region (refer to the “REGIONAL USE MAP”). 
 
• Do not graze treated areas or harvest for forage or hay. 
 
• Do not apply within 45 days of harvest. 
 
SPRAY DRIFT 
AERIAL APPLICATIONS: 
• Do not release spray at a height greater than 10 feet above the vegetative canopy, unless a greater 
application height is necessary for pilot safety. 
• For applications prior to the emergence of crops and target weeds, applicators are required to use a 
coarse or coarser droplet size (ASABE S572.1). 
• For all other applications, applicators are required to use a medium or coarser droplet size (ASABE 
S572.1). 
• For aerial applications: Do not apply when wind speeds exceed 15 mph at the application site. If the 
wind speed is greater than 10 mph, the boom length must be 65% or less of the wingspan for fixed 
wing aircraft and 75% or less of the rotor diameter for helicopters. Otherwise, the boom length must 
be 75% or less of the wingspan for fixed wing aircraft and 90% or less of the rotor diameter for 
helicopters. Applicators must use one-half swath displacement upwind at the downwind edge of the 
field. 
• Nozzles must be oriented so the spray is directed toward the back of the aircraft. 
• Do not apply when wind speeds exceed 15 mph at the application site. 
• Do not apply during temperature inversions. 
 
GROUND BOOM APPLICATIONS: 
• User must only apply with the nozzle height recommended by the manufacturer, but no more than 3 
feet above the ground or crop canopy. 
• For applications prior to the emergence of crops and target weeds, applicators are required to use a 
coarse or coarser droplet size (ASABE S572.1). 
• For all other applications, applicators are required to use a medium or coarser droplet size (ASABE 
S572.1). 
• Do not apply when wind speeds exceed 15 miles per hour at the application site. 
• Do not apply during temperature inversions.

Page 20 of 21 
 
 
SPRAY DRIFT ADVISORIES 
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT. 
BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS. 
 
BOOMLESS GROUND APPLICATIONS: 
Setting nozzles at the lowest effective height will help to reduce the potential for spray drift. 
 
IMPORTANCE OF DROPLET SIZE 
An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide target 
pest control. While applying larger droplets will reduce spray drift, the potential for drift will be greater if 
applications are made improperly or under unfavorable environmental conditions. 
 
Controlling Droplet Size - Ground Boom 
• Volume- Increasing the spray volume so that larger droplets are produced will reduce spray drift. Use the 
highest practical spray volume for the application. If a greater spray volume is needed, consider using a 
nozzle with a higher flow rate. 
• Pressure- Use the lowest spray pressure recommended for the nozzle to produce the target spray volume 
and droplet size. 
• Spray Nozzle- Use a spray nozzle that is designed for the intended application. Consider using nozzles 
designed to reduce drift. 
 
Controlling Droplet Size - Aircraft 
• Adjust Nozzles- Follow nozzle manufacturer’s recommendations for setting up nozzles. Generally, to reduce 
fine droplets, nozzles should be oriented parallel with the airflow in flight. 
 
BOOM HEIGHT 
Ground Boom: Use the lowest boom height that is compatible with the spray nozzles that will provide uniform 
coverage. For ground equipment, the boom should remain level with the crop and have minimal bounce. 
 
RELEASE HEIGHT 
Aircraft: Higher release heights increase the potential for spray drift. 
 
SHIELDED SPRAYERS 
Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify that 
the shields are not interfering with the uniform deposition of the spray on the target area. 
 
TEMPERATURE AND HUMIDITY 
When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation. 
 
TEMPERATURE INVERSIONS 
Drift potential is high during a temperature inversion. Temperature inversions are characterized by increasing 
temperature with altitude and are common on nights with limited cloud cover and light to no wind. The 
presence of an inversion can be indicated by ground fog or by the movement of smoke from a ground source 
or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low 
wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good 
vertical air mixing. Avoid applications during temperature inversions. 
 
WIND 
Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND 
CONDITIONS. 
Applicators need to be familiar with local wind patterns and terrain that could affect spray drift. 
 
HANDHELD TECHNOLOGY APPLICATIONS 
Take precautions to minimize spray drift.

Page 21 of 21 
 
 
STORAGE AND DISPOSAL 
Do not contaminate water, food, or feed by storage or disposal. 
PESTICIDE STORAGE: Store in original container in secured dry storage area. Prevent cross-contamination 
with other pesticides and fertilizers. 
PESTICIDE DISPOSAL: To avoid waste, use all materials in this container by application according to label 
directions. If wastes cannot be avoided, offer remaining product to a waste disposal facility or pesticide 
disposal program (often, such programs are run by State or local governments or by industry) . 
CONTAINER HANDLING: 
Nonrefillable Container (rigid material; < 5 gallons): Nonrefillable container. Do not reuse or refill this 
container. Offer for recycling, if available. Triple rinse container (or equivalent) promptly after emptying. Triple 
rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 
seconds after the flow begins to drip. Fill the container one- fourth full with water and recap. Shake for 10 
seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain 
for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Then offer for recycling 
if available or puncture and dispose of in a sanitary landfill, or by incineration. 
Nonrefillable Container (rigid material; > 5 gallons up to < 250 gallons): Nonrefillable container. Do not 
reuse or refill this container. Offer for recycling, if available. Triple rinse container (or equivalent) promptly 
after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix 
tank. Fill the container one-fourth full with water. Replace and tighten closures. Tip container on its side and 
roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its 
end and tip it back and forth several times. Turn the container over onto its other end and tip it back and forth 
several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use or 
disposal. Repeat this procedure two more times. Then offer for recycling if available or puncture and dispose 
of in a sanitary landfill, or by incineration. 
Refillable Container (> 2
 50 gallons & Bulk): Refillable container. Refill this container with pesticide only. 
Do not reuse this container for any other purpose. Cleaning the container before final disposal is the 
responsibility of the person disposing of the container. Cleaning before refilling is the responsibility of th e 
refiller. To clean the container before final disposal, empty the remaining contents from this container into 
application equipment or mix tank. Fill the container about 10% full with wat er. Agitate vigorously or 
recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate 
collection system. Repeat this rinsing procedure two more times. Then offer for recycling if available or 
puncture and dispose of in a sanitary landfill, or by incineration, or, by other procedures approved by State 
and local authorities. 
 
WARRANTY—CONDITIONS OF SALE 
OUR DIRECTIONS FOR USE of this product are based upon tests believed reliable. Follow directions carefully. 
Timing and method of application, weather and crop conditions, mixtures with other chemicals not specifically 
directed and other influencing factors in the use of this product are beyond the control of the Seller. To the 
extent consistent with applicable law, Buyer assumes all risks of use, storage and handling of this material not 
in strict accordance with directions given herewith. To the extent consistent with applicable law, in no case shall 
the Manufacturer or the Seller be liable for consequential, special or indirect damages resulting from the use or 
handling of this product when such use and/or handling is not in strict accordance with directions given herewith. 
The foregoing is a condition of sale by the Seller and is accepted as such by the Buyer. 
 
 
 M
anufactured By: 
 
 
 
 
 
 
FOMASATE and the Drexel logo are either trademarks or registered trademarks of Drexel Chemical Company. 
All other brand names, product names 
or trademarks belong to their respective holders.