crop-chem-docs/corpus/epa_ppls/228-126.md

# RIVERDALE SOLUTION EMULSIBLE

- EPA Reg No: **228-126**
- Registrant: NUFARM AMERICAS, INC.
- Signal word: Caution
- Active ingredients: 2,4-D, 2-ethylhexyl ester (94%)
- Label accepted: 2009-03-25
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000228-00126-20090325.pdf

---
fJ3J()'S J aOOq 
~----------------------------------------__ ----r-~-------~------------~ U.S. ENVIR()NMENTAL PROTECTION 
AGENCY· 
Office of Pesticide Programs 
Registration Division (7505P) 
Ariel Rios Building 
1200 Pennsylvania Ave., NW 
Washington, D.C. 20460 
NOTICE OF PESTICIDE: 
_ Registration 
-L Reregistration 
(under FiFRA, as amended) 
Name and Address of Registrant (include ZIP Code):' 
Nufann Americas, Inc. 
150 Harvester Drive, Suite 200 
Burr Ridge, IL 60527 
EPA Reg. Number: Date of Issuance: 
228-126 
MAR 2 5 2009 
Tenn of Issuance: 
Name of Pesticide Product: 
Riverdale Solution Emulsible 
On the basis of information furnished by the registrant, the above named pesticide is hereby registered/reregistered under the Federal Insecticide, 
Fungicide and Rodenticide Act. Registration is in no way to be construed as an endorsement or recommendation of this product by the Agency. In order 
to protect health and the environment, the Administrator, on his motion, may at any time suspend or cancel the registration of ' a pesticide in accordance 
with the Act. The acceptance of any name in connection with the registration of a product under this Act is not to be construed as giving the registrant a 
right to exclusive use of the name or to its use if it has been covered by others, 
This product is reregistered in accordance with FIFRA section 4(g)(2)(C) provided you: 
1. Submit and/or cite all data required for registration/reregistration review of your product when 
the Agency requires all registrants of similar products to submit data. 
' ... ;'*'r"": 
2. Make the following revisions to the final printed labeling: 
a. Per the Acute Toxicity review, the Hazards to Humans and Domestic Animals must be 
revised to read: 
"CAUTION 
Hannful if swallowed. Hannful if absorbed through skin. Causes moderate eye irritation. 
Avoid contact with eyes, skin or clothing." 
b. The petroieum distillate warning in the ingredient sub statement and the Note to Physicians 
is not required for this product and must be removed. 
Continued on Page 2 
Signature of Approving Official: " 
Joanne I. Miller t~--L ~ ~ ~ 
Product Manager 2 
Herbicide Branch 
Registration Division (7505P) 
EPA Form 8570-6 
Date: 
MAR 2 5 2009

,: 
Page 2 
EPA Reg. No. 228-126 
c. Per the Acute Toxicity Review, the PPEsection must be revised to read: 
"Some materials that are chemical-resistant to this product are made of any waterproof 
material. If you want more options, follow the instructions for category A 011 an EPA 
chemical-reisistance category selection chart. 
"All mixers, loaders, flaggers and other applicators and handlers must wear: 
Long-sleeved shirt and long pants; . 
Shoes and socks; 
Chemical-resistant gloves (except pilots) 
Chemical-resistant apron when mixing, loading, cleaning up spills or equipment, or otherwise 
exposed to the concentrate. 
See engineering controls for additional requirements." 
d. The first sentence of the Environmental Hazard section must be revised to read: 
"This pesticide is toxic to fish and aquatic invertebrates." 
e. Make the following changes to the Directions for Use section: 
Com: 
-The label must be revised to indicate that the preharvest use on com is only allowed on field 
. and popcorn and not on sweet corn. 
-The typographical error in bold text "Do not use treated crop as fodde for 7 days fo1l9wing 
application" must be revised to 'fodder'. 
Cereal Grains (Barley, Oats, Wheat. Rye): 
-The rates contained in the directions to apply up to 1 ~ pints (.92 lbs ae) per acre in dry 
conditions in western states and up to 1 2/3 pints (1.22lbs ae) per acre for emergency weed 
control in wheat need to be clearly identified as post-emergence applications. 
-The typographical error in the text "Fpr preharvest applications, do not apply more than 2/3 
pints per acre per application." must be revised. 
Continued on Page 3

·'1' 
. ( 
Page 3 
I ' 
EPA Reg. No. 228-126 
Soybeans (preplant only): 
-For the Application and Use Rates Table, clarify that only one of the two application options 
may be used in a single crop season (option 1 or option 2). 
Non-crop Areas: 
,-The last statement of the restrictions and limitations contains a typographical error: 
"Applications .... timber or other plants being grown for sal or other commercial use, ... " 
Forestry: 
-For the restrictions and limitations for basal spray, cut surface-stumps and frills, the 
maximum application rate of5-1I2 quarts (8.l41bs ae) per 100 gallons of spray solution 
must be revised to a maximum of 5-2/5 quarts (7.99Ibs ae) per 100 gallons of spray 
solution. 
Tank Mixes: 
-'Turbo 8EC', 'Telar', 'Oust', 'Escort', and 'Spyder are not currently active registered 
products and must be removed from this labeL 
-'Dual' and 'Buctril ME4 BroadleafHerbicide' are not the currently registered product names 
and must be revised. 
-The 6
th 
line of the first paragraph contains a grammatical error that needs revision: 
"First mix the this product in water ... " 
-The 2
nd 
line of the fourth paragraph contains a typographical error that needs revision: 
" ... mix application of this prodct with ... " 
-Diablo Herbicide's active ingredient is Dicamba, which can be applied at a maximum rate of 
lib ~e per acre per application and not to exceed 2 applications per year. For this reason, 
the application rates currently on this product label of 6 pints (6
th 
line of paragraph 6) and 2 to 
8 quarts (11 th line of paragraph 6) must be revised to a maximum of 2 pints of Diablo per acre 
per application. 
f. Add the following statement to the labeling: 
"Use of this product in certain portions ofCalifomia, Oregon and Washington is subject to the 
January 22,2004 Order for injunctive relief in Washington Toxics Coalition, et al. v. EPA, 
COl- 0132C, (W.D. WA). For further information, please refer to EPA Web Site: 
http://www.epa.gov/espp.'' 
3. A stamped copy of your labeling is enclosed for your records. Submit one copy of the revised 
final printed label for the record before you release the product for shipment. If these conditions 
are not complied with, the registration will be subject to cancellation in accordance with FIFRA 
sec. 6( e ). Your release for shipment of the product constitutes acceptance of these conditions. 
Enclosure

( ( 
SOLUTION EMULSIBLE 
A SELECTIVE WEED KILLER 
FOR CONTROL OF MANY BROADLEAF WEEDS AND BRUSH CONTROL IN NON·CROP 
AREAS SUCH AS LAWNS, PASTURES, RANGELANDS, FENCE ROWS, RIGHTS·OF·WAY, ALSO 
FOR USE IN CORN AND.SMALL GRAINS. 
ACTIVE INGREDIENT: 
2-Ethylhexyl Esterof2,4-DichlorophenoxyaceticAcid* ........................................ , .............................................................................. 94.0% 
OTHER INGREDIENTS: .......... : ............................................................................................ ~..................................................................... 6.0% 
TOTAL: ............................................................................................. 100.0% 
Isomer Specific Method, Equivalent to: 
*2,4-Dichlorophenoxyacetic Acid ................................................................ :.................................................... 62.4%,5.9Ibs.lgal. 
This product contains petroleum distillates 
KEEP OUT OF REACH OF CHILDREN 
CAUTION - PRECAUCION 
SI usted no entiende la etiqueta,busque a algulen para que se la explique a usted en detaJle. 
(If you do not understand the label, find someone to explain it to you in detail.) 
.SEE INSIDE BOOKLET FOR FIRST ~ID AND ADDITIONAL PRECAUTIONARY STATEMENTS 
EPA REG. NO. 228-126 
EPA EST. NO. 
For Chemical Spill, Leak, Fire, or Exposure, Call CHEMTREC (800) 424-9300 
For Medical Emergencies Only, Call (877) 325-1840 
ACCIWt~D 
with COMMENTS 
in 8PA Letter D8~d 
MAR 25·2009 
Under the Federal Insecticide 
Fungicide. and Rodenticide Act 
as . amended, for the pesticide 
registered under EPA Reg. No. 
Manufactured For: 
NUFARM AMERICAS INC 
150 Harvester Drive 
Burr Ridge, IL 60527 
\ ... <. " , 
NET CONTENTS GALS. 
" , 
{ l ( ( ( I; 
, 
l 
(.l (, (.t­
, 
<,~. ... 
(

PRECAUTIONARY STATEMENTS 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
CAUTION - PRECAUCION 
Harmful if swallowed, inhaled or absorbed through skin. Avoid breathing vapors or spray mist, and contact with skin, eyes and 
clothing. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or 
using the toilet. Remove and wash contaminated clothing before reuse. 
Personal Protective Equipment (PPE) 
Some materials that are chemical-resistant to this product are listed below. If you want more options, follow the instructions for category E 
on an EPA chemical-resistance category selection chart. 
All mixers, loaders, applicators, flaggers, and other handlers must wear: 
• long sleeved shirt and long pants 
• shoes and socks 
• chemical resistant gloves, when applying with any handheld nozzle or equipment, mixing or loading, cleaning up spills or equipment, or 
otherwise exposed to the concentrate. 
• chemical resistant apron when mixing or loading, cleaning up spills or equipment, or otherwise exposed to the cOncentrate. 
See engineering controls for additional requirements. 
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. 
Keep and wash PPE separately from other laundry. Discard clothing and other absorbent material that have been drenched or heavily 
contaminated with the product's concentrate. Do not reuse them. 
Engineering Controls Statement 
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker 
Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d) (4-6)), the handler PPE (personal protective equipment) 
may be reduced or modified as specified in the WPS. For aerial applications, pilots must use an enclosed cockpit that meets the 
requireme"nts listed in the WPS for agricultural pesticides [40 CFR 170.240(d)(6)). 
USER SAFETY RECOMMENDATIONS 
Users Should: 
• Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. 
• Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. If pesticide gets on 
skin, wash immediately with soap and water. 
• Remove PPE immediately after handling this. product. Wash the outside of gloves before removing. As soon as possible, wash 
thoroughly and change into clean clothing. 
FIRST AID 
IF SWALLOWED • Call a poison control center or doctor immediately for treatment advice. 
• Have person sip a glass of water if able to swallow. 
• Do not induce vomiting unless told to do so by a poison control center or doctor. 
• Do not give anything by mouth to an unconscious person. 
IF IN EYES • Hold eye open and rinse slowly and gently with water for 15 to 20 minutes. 
• Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. 
• Call a poison control center or doctor for treatment advice. 
IF ON SKIN OR • Take off contaminated clothing. 
CLOTHING • Rinse skin immediately with plenty of water for 15 to 20 -minutes. 
• Call a poison control center or doctor for treatment advice. 
Have the product container or label with you when calling a poison control center or doctor, or going for treatment. You may also 
contact 1-877-325-1840 for emergency medical treatment information. 
NOTE TO PHYSICIAN 
Contains petroleum distillate - vomiting may cause aspiration pneumonia. 
ENVIRONMENTAL HAZARDS 
This product may be toxic to fish and aquatic invertebrates. Do not apply directly to water, to areas where surface water is present, or 
to intertidal areas below the mean high water mark. Drift and runoff may be hazardous to aquatic organisms in water adjacent to 
treated areas. Do not contaminate water when disposing of equipment wash waters or rinsate. 
This product has properties and characteristics associated with chemicals detected in groundwater. The use of this product in 
areas where soils are permeable, particularly where the water table is shallow, may result in groundwater contamination. 
Application around a cistern or well may result in contamination of drinking water or groundwater. 
2 
~/17

DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
READ ENTIRE LABEL BEFORE USING THIS PRODUCT. USE STRICTLY IN ACCORDANCE WITH LABEL 
PRECAUTIONARY STATEMENTS AND DIRECTIONS. 
Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected 
handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible 
for pesticide regulation. 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This Standard contains 
requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and .handlers· of agricultural 
pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific 
instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and restricted-entry 
interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. 
Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours. 
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with 
anything that has been treated, such as plants, soil, or water, is: coVeralls, chemical-resistant gloves made of any water-proof 
and shoes plus socks. . 
NON-AGRICULTURAL USE REQUIREMENTS 
The requirements in this box apply to uses of this product that are NOT within the scope of the Worker Protection Standard for 
agricultural pesticides (40 CFR part 170). The WPS applies when this product is used to produce agricultural plants on farms, 
forests, nurseries, or greenhouses. 
Do not enter or allow people (or pets) to enter the treated area until sprays have dried. 
GENERAL INFORMATION 
This product is a low volatile ester especially prepared for use on crops and weeds where a susceptible crop in the near vicinity 
may be injured by a more volatile product. It is recommended for control of numerous broad leaf weeds and certain 2,4-0 
susceptible woody plants without injury to most established grasses. In cropland, 2,4-0 Ester is more effective than amines 
for controlling hard-to-kill weeds such as bindweed, thistle, smartweeds, wild garlic, curly dock, tansy ragwort, and wild 
onions. For best results apply this product as a water or oil spray during warm weather when young succulent weeds or brush 
are actively growing. Application under drought conditions often will give poor results. The lower recommended rates will be 
satisfactory on susceptible annual weeds. For perennial weeds and conditions such as the very dry areas of the western states, 
where control is difficult, the higher recommended rates should be used. Deep-rooted perennial weeds such as Canada thistle and 
field bindweed and many woody plants usually require repeated applications for maximum control. 
Other Restrictions 
Do not use the same spray equipment for applying other materials to 2,4-0 susceptible crops as injury may result. It is best to 
use a separate sprayer for application of insecticides and fungicides. Clean and rinse spray equipment using soap or detergent 
and water or suitable chemical cleaner, and rinse thoroughly before reuse for other spraying. Do not apply this product through 
any type of irrigation system. Treated water may be used for watering turf grasses immediately after application. Do not use 
in or near a greenhouse. Excessive amounts of this product in the soil may temporarily inhibit seed germination and plant growth. 
SPRAY DRIFT MANAGEMENT 
A variety of factors including weather conditions (e.g., wind direction, wind speed, temperature, relative humidity) and method of 
application (e.g., ground, aerial, air blast, chemigation) can influence pesticide drift. The applicator must evaluate all factors and 
make appropriate adjustments when applying this product. 
Droplet Size 
When applying sprays that contain 2,4-0 as the sole active ingredient, or when applying sprays that contain 2,4-0 mixed with active 
ingredients that require a Coarse or coarser spray, apply only as a Coarse or coarser spray (ASAE standard '572) or a volume 
mean diameter of 385 microns or greater for spinning atomizer nozzles.' . 
When applying sprays that contain 2,4-0 mixed with other active ingredients that require a Medium or more fine spray, apply only 
as a Medium or coarser spray (ASAE standard 572) or a volume mean diameter of 300 microns or greater for spinning atomizer 
nozzles. 
Wind Speed 
Do not apply at wind speeds greater than 15 mph. Only apply this product if the wind direction favors on-target deposition and there 
are not sensitive areas (including, but not limited to, residential areas, bodies of water, known habitat for nontarget species, 
3

nontarget crops) within 250 feet downwind. If applying a Medium spray, leave one swath unsprayed at the downwind edge of the 
treated field. . 
Temperature Inversions 
If applying at wind speeds less than 3 mph, the applicator must determine if: a) conditions of temperature inversion exist, or b) 
stable atmospheric conditions exist at or below nozzle height. Do not make applications into areas of temperature inversions or 
stable atmospheric conditions. 
Susceptible Plants 
Do not apply under circumstances where spray drift may occur to food, forage, or other plantings that might be damaged or crops 
thereof rendered unfit for sale, use or consumption. Susceptible crops include, but are not limited to, cotton, okra, flowers, grapes 
(in growing stage), fruit trees (foliage), soybeans (vegetative stage), ornamentals, sunflowers, tomatoes, beans, and other 
vegetables, or tobacco. Small amounts of spray drift that might not be visible may injure susceptible broadleaf plants. 
Other State and Local Requirements 
Applicators must follow all state and local pesticide drift requirements regarding application of 2,4-0 herbicides. Where states have 
more stringent regulations, they must be observed. 
Equipment 
All aerial and ground application equipment must be properly maintained and calibrated using appropriate carriers or surrogates. 
Additional requirements for aerial applications: 
The boom length must not exceed 75% of the wingspan or 90% of the rotor blade diameter. 
Release spray at the lowest height consistent with efficacy and flight safety. Do not release spray at a height greater than 10 feet 
above the crop canopy unless a greater height is required for aircraft safety. This requirement does not apply to forestry or rights-of­
way applications. 
When applications are made with a crosswind, the swath will be displaced downwind. The applicator must compensate for this by 
adjusting the path of the aircraft upwind. 
Additional requirements for ground boom application: 
Do not apply with a nozzle height greater than 4 feet above the crop canopy: 
Additional requirements for liquid products applied as a spray and containing an ester form of 2, 4-0 (e. g. 2,4-0 butoxyethyJ ester, 
2,4-0 ethylhexyl ester, 2,4-0 isopropyl ester): . 
2,4-0 esters may volatilize during conditions of low humidity and high temperatures. Do not apply during conditions of low humidity 
and high temperatures. . 
Application Rates: . 
Unless otherwise recommended, suggested application rates may be up to 10 gallons of total spray by air or 5 to 25 gallons by 
ground application equipment. If band treatment is used, base the dosage rate on the actual area to be sprayed. Although 
water quantities may vary due to different types of application equipment, sufficient water must be used to provide for complete and 
unifonm coverage. High water gallonage may be used if desired to improve spray coverage. In all cases, use the same 
recommended amount of 2,4-0 per acre. When product is used for weed control in crops, the growth stage of the crop must be 
considered. For crop uses, do not mix with oil, surfactants, or other adjuvants unless specifically recommended on label. To do so 
may reduce the herbicide's selectivity and could result in crop damage. If you are not prepared to accept some degree of crop 
injury, do not use this product. Crop varieties vary in response to 2,4-0 and some are easily injured. Apply this product to 
varieties known to be tolerant to 2,4-0. If you are uncertain concerning tolerant varieties of local use situations that may 
affect crop tolerance to 2,4-0, consult your seed company, State Agricultural Extension Service or qualified crop consultant for 
advice. 
TO PREPARE THE SPRAY: (1) Fill the spray tank about half full with water, then add the required amount of this product with 
agitation, and finally the rest of the water. NOTE: This product in water fonms an emulsion which tends to separate unless the mixture 
is kept agitated. Continue agitation during application until spray tank is empty. (2) If oil is added, first mix this product and the 
oil and then add this mixture to the' water. However, with adequate agitation, the oil can be added after the product is 
mixed in water. (3) If straight oil is used, a solution is formed and separation does not occur. Do not allow any water to get 
into the oil-herbicide mixture to avoid formation of an invert emulsion. 
WEEDS CONTROLLED 
This product will kill or control the following weeds in addition to many other noxious plants susceptible to 2,4-0. 
Alder 
Annual yellow sweet 
clover 
Artichoke 
Aster 
Austrian fieldcress 
Bedstraw 
Beggartick 
Biden 
Bindweed 
Bird vetch 
Bitterweed 
Bitter wintercress 
Black-eyed Susan 
Black Medic 
Black Mustard 
Black-seed plantain 
Blessed thistle 
Blue lettuce . 
Blue vervain 
4 
Box elder 
Bracted plantain 
Brassbuttons 
Bristly oxtongue 
Broadleaf dock 
Broadleaf plantain 
Broomweed 
Buckhorn 
. Buckhorn plantain 
Bulbous buttercup 
Bull nettle 
Bull thistle 
Burdock 
Burning nettie 
Bur ragweed 
Burweed 
Buttercup 
Canada thistle 
Carolina geranium 
Carpetweed

Catchweed Bedstraw 
Catsear 
Catnip 
Chickweed 
Chicory 
Cinquefoil 
Clover 
Cockle 
Cocklebur 
Coffeebean 
Coffeeweed 
Common chickweed 
Common mullein 
Common sowthistle 
Corn Chamomile 
. Creeping jenny 
Crimson clover 
Croton 
Cudweed 
Curly dock 
Curly indigo 
Dandelion 
Dead nettie 
Dock 
Dogbane 
Dogfennel 
Elderberry 
English daisy 
Fall dandelion 
False dandelion 
False flax 
False sunflower 
Fiddleneck 
Field bindweed 
Field pansy 
Flea bane (daisy) 
Flixweed 
Florida betony 
Florida pusley 
Frenchweed 
Galinsoga 
Garlic mustard 
Goathead 
Goatsbeard 
Goldenrod 
Ground ivy 
Gumweed 
Hairy bittercress 
Hairy fleabane 
Hawkweed 
Healall 
Heartleaf drymary 
Hedge bindweed 
Hedge mustard 
Hemp, Henbit 
Hoary cress 
Hoary plantain 
Hoary vervain 
Honeysuckle 
Hop clover 
Horsenettle 
Horsetail 
Indiana mallow 
Ironweed 
Jewelweed 
Jimsonweed 
Kochia 
Knawel 
Knotweed 
Lambsquarter 
Lespedeza 
Locoweed 
Lupine 
Mallow 
Marshelder 
Matchweed 
Mexicanweed 
Milk vetch 
Milkweed bloodflower 
Mugwort 
Morningglory 
Mousear chickweed 
Musk thistle 
Mustard 
Narrowleaf plantain 
Narrowleaf vetch 
Nettie 
Orange hawkweed 
Oxalis 
Oxeye daisy 
Parsley-piert 
Parsnip 
Pearlwort 
Pennycress 
Pennywort 
Peppergrass 
Pepperweed 
Pigweed 
Pineywoods bedstraw 
Plains coreopsis 
Plantain 
Poison hemlock 
Poison ivy 
Poison oak 
Pokeweed 
Poo~oe 
Povertyweed 
Prickly lettuce 
Prickly sida 
'Primrose 
Prostrate knotweed 
Prostrate pigweed 
Prostrate spurge 
Prostrate vervain 
Puncture vine 
Purslane 
Ragweed 
Red clover 
Redroot pigweed 
Red sorrel 
Redstem filaree 
Rough cinquefoil 
Rough fleabane, 
Roundleafed marigold 
Rush 
Russian pigweed 
Russian thistle 
St Johnswort 
Scarlet pimpernel 
Scotch thistle 
Sheep sorrel 
Shepherdspurse 
Slender plantain 
Smallflower galinsoga 
Smartweed 
Smooth dock 
Smooth pigweed 
Sneezeweed 
Southern wild rose 
Sowthistle 
5 
Spanish needle 
Spatterdock 
Speedwell 
Spiny amaranth 
Spiny cocklebur 
Spotted catsear 
Spotted knapweed 
Spotted spurge 
Spurge 
Spurweed 
Stinging nettle 
Stinkweed 
Stitchwort 
Strawberry 
clover 
Sumac 
Sunflower 
Sweet clover 
Tall nettle 
Tall vervain 
Tansy mustard 
Tansy ragwort 
Tanweed 
Tarweed 
Thistle 
Tick trefoil 
Toadflax 
Trailing Crownvetch 
Tumble mustard 
Tumble pigweed 
Tumbleweed 
Velvet leaf 
Venice mallow 
Veronica 
Vervain 
Vetch 
Virginia buttonweed 
Virginia creeper 
Virginia pepperweed 
Wavyleaf bullthistle 
Western clematis 
Western salsify 
White clover 
White mustard 
Wild aster 
Wild buckwheat 
Wild carrot 
Wild four-o'-clock 
Wild garlic 
Wild geranium 
Wild lettuce 
Wild marigold 
Wild mustard 
Wild onion 
Wild parsnip 
Wild radish 
Wild rape 
Wild strawberry 
Wild sWeet potato 
Wild vetch 
Willow 
Witchweed 
Woolly croton 
Woolly morning-glory 
Woolly plantain 
Woodsorrel 
Wormseed 
Yarrow 
Yellow rocket 
Yellowflower 
pepperweed 
and other broad leaf 
weeds

Some of these species may require repeat applications andlor use of higher rate recommended on this product label even 
under ideal conditions for applications. Control of pigweeds in the High Plains area of Texas and Oklahoma may not be 
satisfactory with this product. 
USE IN LIQUID NITROGEN FERTILIZER: This product may be combined with liquid nitrogen fertilizer suitable for foliage 
application on corn, grass, pastures, or small grains in one operation. Use product according to directions on this label for those 
crops. Use liquid nitrogen fertilizer at rates recommended by supplier or Extension Service Specialist. Mix the product 
and fertilizer according to the following instructions: Fill the spray tank approximately half full with the liquid nitrogen 
fertilizer. Add the product while agitating the tank. Add the remainder of the fertilizer while continuing to agitate. Apply immediately 
maintaining agitation during application until tank is empty. Do not apply during cold (near freezing) weather. Spray mixture 
must be used immediately and may not be stored. Do not allow mixture to stand overnight. 
NOTE: If good, continuous agitation is not maintained, separation of the spray mixture andlor clogging of the nozzles is likely to 
occur. Fertilizers can increase foliage contact burn of herbicides. Reducing the fertilizer rate and concentrate will reduce the hazard 
of leaf burn. 
CORN 
(Field, Sweet and Popcorn) 
Pre-plant - 2/3 to 1-1/3 pints per acre 
Pre-emergent - Average Conditions -1-1/4 to 1-113 pints per acre 
Emergent - 2/3 pints per acre 
Post-emergent - Average Conditions - 1/4 pint per acre 
Dry Conditions· - 1/4 to 1/2 pint.per acre 
Pre-harvest - 1/2 to 1-1/3 pints per acre 
·For western states - Arizona, Idaho, Montana, Nevada, Oregon, Utah, Washington and Wyoming 
All with recommended amounts of water to make per acre applications. Use lower rates of product for easily-killed weeds, on inbreds, 
and when corn is growing rapidly. Do not cultivate for about 2 weeks after treatment while corn is brittle. 
Pre-Plant: To control emerged broad leaf weed seedlings or existing cover crops prior to planting corn. Apply 7 to 14 days before 
planting. Do not use on light, sandy soil, or where soil moisture is inadequate for normal weed growth. Use high rate for 
control of less susceptible weeds or cover crops such as alfalfa. 
Pre-emergent: Apply product to emerged weeds from 3 to 5 days after planting but before corn emerges. Do not use on very 
light, sandy soils. Use the higher rates on heavy soils. Plant corn as deep as practical. Product will not control weeds which 
have not emerged. . 
Emergent: Apply in 10 to 30 gallons of water per acre just as corn plants are breaking ground. 
Post-emergent: As soon as corn is over 8 inches tall, use drop nozzles to keep spray off corn foliage as much as possible;' 
direct spray over tops of weeds but not over the corn. Do not apply from tasseling to dough stage. If corn is growing 
rapidly and temperature and soil moisture is high, use 1/4 pint per acre to reduce possibility 'of crop damage. Delay 
cultivation for 8 to 10 days to prevent stalk breakage due to temporary brittleness caused by 2,4-D. Application rates of up to 1/2 
pint per acre may be used to control some hard-to-control weeds. However,.the possibility of injury to the corn is increased. 
Do not" use with atrazine, oil or other adjuvants. Since the tolerance to 2.4-D of individual hybrids varies, consult your seed 
supplier, local Extension Service, Agricultural Experiment Station, or University Weed Specialist for information. 
Pre-harvest: After the hard dough or denting stage, apply 1/2 to 1-1/3 pints in 20 to 50 gallons of water per acre by air or 
ground equipment to suppress perennial weeds, decrease weed seed production, and control tall weeds such as bindweed, 
cocklebur, dogbane, jimsonweed, ragweed, sunflower, velvetleaf and vines that interfere with harvesting. The.high rate will be 
needed for tough weeds under stress. . 
RESTRICTIONS AND LIMITATIONS FOR USE ON FIELD AND POP CORN: 
Do not use treated crop as fodde for 7 days following application. 
Preharvest interval is 7 days. 
For preplant or preemergence applications, do not apply more than 1-1/3 pints product per acre per application. Do not make 
more than 1 preplant or preemergence application per crop cycle. 
For postemergence applications, qo not apply more than 2/3 pints product per acre per application. Do not make more than 1 
postemergence application per crop cycle. 
For preharvest applications, do not apply more than 2 pints product per acre per application. Do not make more than 
preharvest application per crop cycle. 
Do not apply more than 4 pints product per acre per crop cycle. 
RESTRICTIONS AND LIMITATION FOR USE ON SWEET CORN: 
• Do not use treated crop as fodder for 7 days following application. 
• Preharvest interval is 45 days. 
6

• Minimium of 21 days between applications. 
• For preplant or preemergence applications, do not apply more than 1-1/3 pints product per acre per application. Do not make 
more than 1 preplant or preemergence application per crop cycle. 
• For postemergence applications, do not apply more than 2/3 pints product per acre per application. Do not make more than 1 
postemergence application per crop cycle. 
• Do not apply more than 2 pints product per acre per crop cycle. 
SMALL GRAINS 
(Barley, Oats, Wheat, Rye) - (not underseeded with a legumes) 
Wheat, Barley, Rye 
Oats 
Annual weeds -
Perennial weeds -
Pre-harvest -
Spring -
Average Conditions -1/4 to 112 pint per acre 
Dry Conditions (Western States) - 1/4 to Y. pints per acre 
Average Conditions - 1/2 pint per acre 
Dry Conditions (Western States) - 3/4 - 1-1/4 pints per acre 
Average Conditions - 1/2 to 213 pints per acre 
1/4 pint per acre and Fall- 1/4 to 1/3 pint per acre 
For aerial application on grain, it is suggested to use this product in 2 or .more gallons of water per acre and for g·round 
application use a minimum of 10 gallons of water per acre. 
Make application in the Spring when the grain is fully tillered or stooled (usually about 4 to 8 inches high), but before jOinting. Do . 
not spray before the tiller stage or from early boot to dough stage. 
Use lower rate of product for easily-killed seedling weeds, and higher rate for older and more tolerant weeds. Do not treat grains 
under-seeded with legumes, and do not spray winter grains in the Fall. To control large weeds that will interfere with harvest or to 
suppress perennial weeds, pre-harvest treatment can be applied when grain is in the dough stage. Higher rates may be needed 
to handle difficult weed problems in certain areas such as under dry conditions especially in western areas. However, do not use 
unless possible crop injurY will be acceptable. For the high rates on Spring wheat and barley as well as winter wheat and rye, 
consult State Agricultural Experiment Station or Extension Service weed specialists for recommendations or suggestions to fit 
local conditions. . 
For emergency weed control in wheat: Perennial broad leaf weeds - apply 1-2/3 pints per acre when weeds are 
approaching bud stage. Do not spray grain in the boot to dough stage. The 1-2/3 pint per acre application can produce injury to 
wheat. Balance the severity of your weed problem against the possibility of crop damage. Where perennial weeds are 
scattered, spot treatment is suggested to minimize the extent of crop injury. Use lower rate if small annual and biennial 
weeds are the major problem. Use the higher rate if perennial weeds or annual and biennial weeds are present which are. in 
the hard-to-kill categories as determined by local experience. The higher rates increase the risk of grain injury and should be used 
only where the weed ·control problem justifies the grain damage risk. Do not apply this product to grain in the seedling 
stage. For aerial application on grain, apply this product in 2 to 10 gallons of water per acre. For ground application use a 
minimum of 10 gallons of water per acre. 
Spring Seeded Oats: Use 1/4 pint per acre with recommended amount of water to give good coverage. Apply after the fully tillered 
stage, except during the boot to dough stage. 
Fedl Seeded Oats (Southern): Apply 1/6 to 3/4 pint per acre with recommended amount of water after full tillering but before early 
boot stage. Some difficult weeds may require the higher rates of 1/3 to 3/4 pint per acre) for maximum control but injury may result. 
Do not spray during or immediately following cold weather. 
Pre-harvest Treatment: Apply 1/2 to 2/3 pints per acre with recommended amount of water per acre when grains are in the hard 
dough stage to control large weeds that may interfere with harvest. Best results will be obtained when soil moisture is 
.sufficient to cause succulent weed growth. 
NOTE: Oats are less tolerant to 2.4-0 than wheat or barley and more likely to be injured. 
Wheat and Barley: Control of Wild Garlic and Wild Onion. 
For improved control of difficult weeds including Wild Garlic and Wild Onion, apply 1/4 to 1-1/4 pints of product per acr). Since these 
rates may injure the crop do not use unless possible crop damage is acceptable. For the higher rates on Spring wheat and barley, 
consult your local State Agricultural Experiment Station or Extension Service Weed Specialist for recommendations or 
suggestions to fit local conditions. 
RESTRICTIONS AND LIMITATIONS FOR USE ON SMALL GRAINS (Barley, Oats, Wheat, and Rye): 
• Do not apply more than 2-1/3 pints per acre per crop cycle. 
• Preharvest Interval is 14 days. 
• For postemergence applications, do not apply more than 1-2/3 pints product per acre per application. Do not apply more than 1 
application per crop cycle. 
• Fpr preharvest applications, do not apply more than 2/3 pints per acre per application. Do not apply more than 1 application per 
crop cycle. 
Control of Wild Garlic in Stubble Grain and Com Fields: Following the harvest of small grains, and corn, Wild Garlic often 
produces new Fall growth. This should be sprayed with 2-1/2 to 2-2/3 pints of product in 20 to 40 gallons of water per acre. This is a 
useful practice as one part of Wild Garlic control program. Do not apply more than 2 applications per year. Do not apply 
7

more than 2-2/3 pints per acre per application. The minimum interval between applications is 30 days or longer. 
Plantback to labeled crops only within 29 days following application .. 
SORGHUM (Milo) 
For Post-emergent control in average conditions, use 1/4 pint; dry conditions (Western States) use 1/4 to 1/3 pint with 
suggested volume of 5 gallons of water by air or 6 to 20 gallons with ground equipment to make per acre application. Apply to 
sorghum when crop is 5 to 15 inches high to top of canopy with secondary roots well established. If sorghum is taller than 8 inches, 
use drop nozzles to keep the spray off the foliage as much as possible. Do not apply boot, flowering or early dough stage. Rates of 
. up to 1/2 pint per acre may be used to control some hard-to-control weeds. However, the chance of crop injury is increased with the 
higher rates. Do not use with oil. Because tempo~ary injury may occur if conditions of high temperature and high soil moisture exist, 
use lower rate. Varieties vary in tolerance to 2,4-0 and some hybrids are quite sensitive. Spray only varieties known to be tolerant to 
2,4-0. Contact seed company or your Agricultural Experiment Station or Extension Service weed speCialists for this information. 
RESTRICTIONS AND LIMITATIONS FOR USE ON SORGHUM: 
• For postemergence applications, do not apply more than 2/3 pints per acre per application. Do not apply more than 
application per crop cycle. 
• Preharvest interval is 30 days. 
Do not allow meat or dairy animals to consume treated crop as fodder or forage for 30 days following application. 
FOR USE IN CROP RESIDUE MANAGEMENT SYSTEMS 
IN SOYBEANS (Preplant only) 
GENERAL INFORMATION: This product is a herbicide that provides control of many emerged susceptible annual and perennial 
broadleaf weeds. This product may be applied prior to planting soybeans to provide foliar burndown control of 
susceptible annual and perennial broadleaf weeds and certain broadleaf cover crops such as those listed on this label. This 
product should only be applied preplant to soybeans in situations such as reduced tillage production systems, where emerged 
weeds are present. Apply only according to the application instructions given below. Do not use any tillage operations 
between application of this product and planting soybeans. . 
MIXING INSTRUCTIONS: Compatible crop oil concentrates, agricultural surfactants and fluid fertilizers approved for use on growing 
crops may increase the herbicidal effectiveness of 2,4-0 on certain weeds and may be added to the spray tank. Read and follow 
all directions and precautions on this label and on all labels of adjuvants or fertilizers mixed with this product. . 
APPLICATION PROCEDURES: Apply using air or ground equipment in sufficient gallonage to obtain adequate coverage of weeds. 
Use 2 or more gallons of water per acre in aerial equipment and 10 or more gallons of water per acre in ground equipment. 
APPLICATION TIMING AND USE RATES FOR SOLUTION EMULSIBLE 
Number of Preplant When to Apply Preplant Maximum Rate Per Application Applications 
(Pints) (Per Crop Cycle) (Days prior to planting soybeans) 
5/8 2 7 
1-1/4 1 15 
WEEDS CONTROLLED: Alfalfa", Bindweed", Bullnettle, Bittercress-smallflowered, Buttercup-small flowered, Carolina geranium, 
Cinquefoil-common and rough, Clover-red', Cocklebur-common, Dandelion", Eveningprimrose-cutleaf, Garlic-wild", 
Horseweed or marestail, Ironweed, Lambsquarters-common, lettuce-prickly, morningglory-annual, Mousetail, Mustard-wild, 
Onion-wild", Pennycress-field, Peppergrass', Purslane-common, Ragweed-common, Ragweed-giant, Shepherdspurse, 
Smartweed-Pennsylvania', Sowthistle-annual, Speedwell, Thistle-Canada', Thistle-bull, Velvetleaf, Vetch-hairy', 
Virginia copperleaf. *These species are only partially controlled. 
For best weed control at time of treatment, weeds should be small, actively growing and free of stress caused by extremes in 
climatic conditions, diseases, or insect damage. The response of individual weed species to this product is variable. Consult your 
local county or state AGRICULTURAL Extension Service or crop consultant for advice. 
APPLICATION RESTRICTIONS AND. PRECAUTIONS: Important Notice - Unacceptable injury to soybeans planted in 
fields treated with SOLUTION EMULSIBLE may occur. Whether or not soybean injury occurs and the extent of the injury 
will depend on the weather (temperature and rainfall) from herbicide application until soybean emergence and agronomic 
factors such as the amount of weed vegetation and previous crop residue present. Injury is more likely under cool rainy conditions and 
where there is less weed vegetation and crop residue present. . 
8

RESTRICTION AND LIMITATIONS FOR USE ON SOYBEANS: 
• Do not use on low organic sandy soils (1.0%). 
• Do not apply more than a total of 1-1/3 pints product per acre per year. 
• Refer to the table above of maximum use rates, maximum number of applications and number of days to wait before planting 
soybeans after an application. . 
• In fields treated with this product, plant soybean seed as deep as practical or at least 1.0 inch deep. Adjust the planter, if 
necessary, to ensure that planted seed is completely covered. 
• Do not apply this product prior to planting soybeans, if you are not prepared to accept the results of soybean injury, including 
possible loss of stand and yield. . 
• Do not replant fields treated with this product in the same growing season with crops other than those labeled for 2,4-0 use. 
FALLOWLAND 
(Crop Stubble on Idle Land or Postharvest to Crops, or Between Crops) 
Use 1-1/4 to 2-2/3 pints of this product per acre in a recommended minimum of 10 gallons of water per acre for ground application 
and recommended minimum of 2 gallons for aerial application of water on annual broadleaf weeds and up to 2-2/3 pints per acre on 
established perennial species such as Canada thistle and Field bindweed. Use lower rate when annual weeds are small (2 to 3 
inches tall) and growing actively. Use the higher rate on older and drought-stressed plants. Spray musk thistles and other 
biennial species while in seedling to rosette stage, and before flower stalks are initiated. The lower rate can be used in 
Spring during rosette stage. In Fall or after flower stalks have developed, use highest rate. Spray perennial weed in bud to 
bloom stage, or in good vegetative growth. Do not disturb treated area for at least 2 weeks after treatment, or until weed tops 
are dead. For wild garlic and wild onion control, apply up to 2-2/3 pints of product per acre making two applications, Fall-Spring or 
Spring-Fall, starting in the late Fall or early Spring. 
RESTRICTIONS AND LIMITATIONS FOR USE ON i=ALLOWLAND: 
• Do not apply more than 2 applications per year. 
• Do not apply more than 2-2/3 pints per acre per application. 
• The minimum interval between applications is 30 days 
Plantback to labeled crops only within 29 days following application. 
PASTURE AND RANGELAND 
(Established Grass Pastures, Rangeland, and Perennial Grasslands Not in Agricultural Production) 
Use 1-1/3 to 2-2/3 pints of product in sufficient water to give good coverage to one acre depending on type of weeds and stage of 
growth. Use only on established stands of perennial grasses. Do not use on bentgrass, alfalfa, clover, or other legumes. Do not use 
on newly seeded areas until grass is well established. Do not use from early boot to milk stage when grass seed productions is 
desired. 
Bitterweed, Broomweed, Croton, Docks, Kochia, Marshelder, Musk thistle and Other Broadleaf Weeds: Use up to 2-2/3 
pints of this product in 10 to 30 gallons of water per acre If weeds are young and growing actively, 1-1/4 pints per acre will 
provide control of some species. Deep-rooted perennial weeds may require repeated treatments in the same year or in 
subsequent years. 
RESTRICTIONS AND LIMITATION FOR USE ON ESTABLISHED PASTURES AND RANGELANDS: 
• Use the higher rate for moderately susceptible weeds or for difficult to control weeds and woody plants. 
• For spot treatments, apply at a rate of 2-2/3 pints per acre 
• Do not cut forage for hay within 7 days of application. If grass is to be cut for hay, Agricultural Use Requirements for the Worker. 
Protection Standard are applicable. 
• Do not apply more than two applications per year. 
'. Do not apply more than 5-215 pints per acre per year, 
• The minimum interval between applications is 30 days 
CONSERVATION RESERVE PROGRAM AREAS 
To control annual broadleaf weeds apply when weeds are actively growing. Use 1/4 to 1/2 pint per acre when weeds are small; use 
higher rates on older weeds. Excessive injury may result if applied to your grasses with fewer than 6 leaves to prior to grasses being 
well established. To control biennial and perennial broadleaf weeds in established grasses apply at a rate of 1-1/4 to 2-213 pints per acre 
(Apply to actively growing weeds. Treat when biennial weeds are in the seedling to rosette stage and before flower stalks become 
apparent. Treat perennial weeds in the bud to bloom stage. 
NOTE: Suggest at least 2 gallons of water per acre by air and 5 gallons of water per acre by ground. Do not harvest or graze treated 
Conservation Reserve Program areas. Do n6t apply to grasses in the boot to dough stage if grass seed production is desired. For 
program lands, consult program rules to determine whether grass or hay may be used. The more restrictive requirements of the 
program rules or this label must be followed. 
9

( 
RESTRICTIONS AND LIMITATIONS FOR USE ON CONSERVATION RESERVE PROGRAM AREAS: 
• Do not cut forage for hay within 7 days of application. 
• For postemergence applications, do not apply more than 2.7 pints of product per acre per application. Do not apply more than twice 
a year. Do not apply more than 5.4 pints product per acre per season. Allow a minimum of 30 days between applications. 
• If grass is to be cut for hay, Agricultural use Requirements for the Worker Protection Standard are applicable. 
• For program lands, such as Conservation Reserve Program, consult program rules to determine whether grass or hay may be used. 
The more restrictive requirements of the program rules or this label must be followed. 
TURF GRASS SEED CROPS 
Apply 1/2 to 2-1/2 pints of product in up to 30 gallons of water per acre by air or ground equipment in the Spring or Fall to control 
broadleaf weeds in grass being grown for seed. Do not apply from early boot to milk stage. Spray seedling grass only after the 
five leaf stage, using 1/3 to 1/2 pint per acre to control small seedling weeds. 
After the grass is well established, higher rates of up to 2-1/2 pints per acre can be used to control hard-to-control annual or 
perennial weeds. For best results, apply when soil moisture is adequate for good growth. Do not use on Bent unless injury 
can be tolerated. 
RESTRICTIONS AND LIMITATIONS FOR TURF GRASS SEED CROPS: 
• Do not make more than 2 applications per year. 
• Do not apply more than 2-213 pints product per acre per application. 
• Observe a minimum of 21 days between applications. 
NON-CROPLAND 
(Fencerows, Hedgerows, Roadsides, Ditches, Rights-of-Way, 
Utility, Power Lines, Railroads, Airports, and Industrial Sites) 
Use 1-1/4 to 2-213 pints of product per acre. Apply when most annual broadleaf weeds are still young and growing vigorously. Apply 
when perennial and biennial weeds are actively growing and near the bud stage, but before flowering. For best results on tansy 
ragwort and musk thistle, treat in rosette stage, before bolting. A second application is usually needed for best results on thistle, 
nertle, and bindweed. Treat wild onion or garlic in early Spring and in Fall when they are young and growing actively. Mix 2-1/2 pints 
of this product in 2 quarts kerosene or diesel oil then add this mixture to 100 gallons of water. Apply 300 to 500 gallons of spray per 
acre, depending on the stand. The addition of a wetting agent (spray adjuvant) is suggested. Usually 2-112 pints per acre will give 
adequate control. 
Southem Wild Rose: On roadsides and fencerows, use 2-3/5 quarts of this product per acre plus 4 to 8 ounces of an agricultural 
surfactant per 100 gallons of water and spray thoroughly as soon as foliage is well developed. Do not apply more than one 
application per year. On rangeland: apply a maximum of 2-213 pints of this product per acre per application. Do not apply more than 
2 applications per year. The minimum interval between applications is 30 days. 
SPOT TREATMENT IN NON-CROP AREAS: To control broad leaf weeds in small areas with a hand or back pack sprayer, use 2-1/2 
fluid ounces of this product per gallon of water and spray to thoroughly wet all foliage. 
NOTE: Applications to non-cropland areas are not applicable to treatment of commercial timber or other plants being grown for sale 
or other commercial use, or for commercial seed production, or for research purposes. 
WOODY PLANT CONTROL: To control woody plants susceptible to 2,4-0 such as Alder, Buckbrush, Elderberry, Sumac, Cherokee 
rose, Japanese honeysuckle, Virginia creeper, Wild grape and Willow on non-crop areas such as rights-of-way, fence rows and 
roadsides, use 1-1/4 to 1-3/4 quarts of product per acre in 30 to 100 gallons of water. Do not make more than one application per 
year. Lower volume of water can be used unless applying through such equipment as Directa-Spra, Wobbler, Mini Wobbler, . 
Spirometer. Spray brush 5 to 8 feet tall after Spring foliage is well developed. Wet all parts of the plants thoroughly, including stem 
and foliage, to the point of runoff. Higher volumesof up to 300 to 500 gallons of spray per acre may be necessary where the brush is 
very dense and over 6 to 8 feet high. Spraying can be effective at anytime up to 3 weeks before frost as long as soil moisture is 
sufficient for active growth of the brush. Control will be less effective in mid-summer during hot dry weather when soil moisture is 
deficient and plants are not actively growing. Oil or wetting agent may be added to the spray, if needed for increased effectiveness. 
Hard-to-control species may require re-treatment next season. In general, it is better to cut tall woody plants and spray sucker growth 
when 2 to 4 feet tall. 
NOTE: Applications to non-cropland areas are not applicable to treatment of commercial timber or other plants being grown for sale 
or other commercial use, or for commercial seed production, or for research purposes. . 
SAND SHIMMERY OAK AND SAND SAGEBRUSH: On the oak, use 1-1/3 pints of this product in 5 gallons of oil or in 4 gallons of 
water plus 1 gallon of oil per acre. Apply by aircraft between May 15 and June 15. On the sagebrush, use 1-1/3 pints in 3 gallons of oil 
per acre and apply by aircraft when foliage is fully expanded and the brush is actively growing. 
BIG SAGEBRUSH AND RABBITBRUSH: Use 1-1/3 to 2-2/3 pints per acre in 2 to 3 gallons of oil or in 3 to 5 gallons of oil­
water emulsion spray. For rabbitbrush, the higher rate is usually required. Brush should be leafed out and growing 
actively when treated. Brush should be leafed out and growing actively when treated. Retreatment may be needed. 
c 
Chamise, Manzanita, Buckbrush, Coastal Sage, Coyotebrush and certain other Chaparral Species: Use 1-1/3 to 2-2/3 pints per acre 
in 5 to 10 gallons of water. One gallon of fuel oil may be included in the spray mixture for added effectiveness. Make applications by 
10

aircraft or ground equipment to obtain uniform spray coverage. For effective control, the brush must be fully leaved out and growing 
actively when sprayed. Retreatment may be needed but do not make more than 2 applications per year. The minimum interval 
between applications is 30 days. Do not apply more than 2-2/3 pints per acre per application. Consult state or local brush control 
specialists for most effective rate, volume and timing of spray application. 
RESTRICTIONS AND LIMITATIONS FOR USE ON NON-CROP AREAS: 
• For postemergence use on annual and perennial weeds, do not apply more than 2.7 pints product per acre per application. Do not 
make more than 2 applications per year with a minimum retreatment interval of 30 days. 
• For poestmergence use on woody plants, do not apply more than 5.4 pints product per acre per year. Do not make more than 1 
application per year. 
• Applications to non-cropland areas are not applicable to treatment of commercial timber or other plants being grown for sal or 
other commercial use, or for commercial seed production, or for research purposes. 
ORNAMENTAL TURF AREAS AND SOD FARMS 
Ornamental Turf (such as Lawns (Residential, Industrial and Institutional), Parks, Cemeteries, Athletic Fields and Golf 
Courses (Fairways, Aprons, Tees and Roughs) and other grass areas) and Sod Farms: Use 1-1/4 to 2 pints of product in 40 
to 180 gallons of water to give. good coverage to one acre on established stands of perennial grasses. Usually 2,0 pints per acre 
provides good weed control under average conditions, 
Treat when weeds are young and actively growing. Do not apply to newly seeded grasses until well established. Use 
higher rate for hard-to-kill weeds. Use higher rate when using higher volume of water per acre. Do not exceed specified 
application dosages for any area. Deep-rooted perennial weeds may require repeated treatments in the same season or in 
subsequent years. Spray when air temperature is between 50° and 85°F. Avoid applying during excessively dry or hot periods unless 
irrigation (watering) is used before treatment. Do not apply if rainfall is expected within 48 hours, nor should lawns be 
irrigated for 48 hours following application. For optimum results, turf should not be mowed for 1 to 2 days before and after 
application. Reseed no sooner than 3 to 4 weeks after application of this product. Adding oil, wetting agent, or other surfactant to the 
spray may be used to increase .effectiveness on weeds but doing so may reduce selectivity to turf resulting in turf damage. 
Maximum kill of weeds will be obtained by applying in Spring and early Fall when weeds are actively growing. Do not use on golf greens 
or on dichondra or other broad leaf herbaceous ground covers. Do not use on creeping grasses such as bent and St Augustine except 
for spot treating, or on newly seeded turf until grass is well established. 
Weed control in Newly Sprigged Coastal Bermudagrass: Apply 1-1/4 to 2.0 pints of this product in 20 to 100 gallons of water per 
acre pre-emergence and/or post-emergence. 
RESTRICTIONS AND LIMITATION FOR USE ON ORNAMENTAL TURF AREAS AND SOD FARMS: 
• For Ornamental Turf,' do not apply more than 2 pints product per acre per application. Do not apply more than twice a year. Do· 
not apply more than 4 pints product per acre per season. 
• For Sod Farms, do not apply more than 2.7 pints product per acre per application. Do not apply more than twice a year with a 
minimum retreatment interval of 21 days. 
FORESTRY 
(Forestry Site Preparation, Forest Roadsides, Brush Control, 
Established Conifer Release, Christmas Trees, Reforestation Areas) 
Conifer Release: For control of Alder, apply 1 to 1-1/4 quarts of product per acre in 8 to 25 gallons of water, and apply as a foliage 
spray. Treat when 3/4 of the brush foliage has attained full size leaves and before new conifer growth reaches 2 inches in length. 
This is usually between early May and mid-June. Adjust treatment date depending on stage of growth and brush species. This may 
cause leader deformation on ex- posed firs, but they should overcome this during the second year after spraying. To control 
susceptible brush species such as ceanothus spp., chinquapin, madrone, manzanita, oil and tanoak and to release Douglas fir, 
hemlock, Sitka spruce or grand fir, apply 2 quarts' of product per acre before new growth on Douglas fir is 2 inches long. To control 
manzanita and ceanothus in ponderosa pine, apply 1-3/4 quarts of this product per acre before pine growth begins in Spring. 
To increase performance, add 2 to 4 quarts of diesel, fuel oil, kerosene, or a suitable approved agricultural surfactant at 
recommended label rate. 
After northern conifers, jack pine, red pine, black spruce, and white spruce cease growth and "harden off' (usually in Mid-July), a 
spray of 3/4 to 1-3/4 quarts of product in 8 to 25 gallons of water per acre may be applied by air to control certain competing 
hardwood species such as Alder, Aspen, Birch, and Willow. Since this treatment may cause occasional conifer injury, do not use if 
such injury cannot be tolerated. Consult your regional or extension forester or state herbicide specialist for recommendations to fit 
local conditions. 
Tree Injections (Pine Release): To control hardwoods, such as Oaks, Hickory, Maple, Pecan, Elm, Sumac, Sweetgum and 
HawttlOrn in forest and other non-crop areas, apply undiluted product in a concentrate tree injector calibrated to apply 0.6 ml per 
injection. Space injections 2 inches apart, edge to edge, completely around the tree and close to the base. The injector bit must 
penetrate the inner bark. On hard-to-kill species such as Hickory, Dogwood, Red maple, Blue beech and Ash make injections 1-1/2 
inches .apart, edge to edge. Treatment may be made at any time of the year. For best results, ·injections should be made during 
growing season, May 15 to October 15. For dilute injections, mix 213 gallon of this product in 19 gallons of water and apply 38 ml per 
injection. 
11

Dormant Application (other than pine): For the control of susceptible deciduous brush species such as Alder, cascara, cherry 
poplar and serviceberry apply up to 2 quarts of product per acre in sufficient diesel .. fuel oil or kerosene for good coverage. Pine Only: 
Make application while pine buds are still dormant. Apply 1-1/4 quarts of product per acre in sufficient water for good coverage by air 
or ground equipment. Do not use this application unless some pine injury is acceptable. Use of diesel, kerosene, or other oil, or 
addition of surfactants to spray mix may cause unacceptable pine injury. Herbaceous Weed Control: To control over-wintering 
susceptible weeds such as false dandelion, klamath weeds, plantain, tansy ragwort apply 213 to 2 quarts of product per acre in 
sufficient water for good coverage. Make application at rates and timing indicated above if pines are present. For control of hazel 
brush and similar species in the Lake States area,apply 1-1/4 quarts of product per acre in B to 25 gallons of water, when new shoot 
growth of Hazel is complete (usually mid-July). 
Site Preparation: (As Budbreak Spray) - For control of Alder prior to planting seedlings, apply 1-1/4 to 2-1/2 quarts of product per 
acre in B to 25 gallons of water, after Alder budbreak but before foliage is 1/4 full size. Application may be made by air or ground. 
If desired, diesel, fuel oil or kerosene may be substituted for water, air or ground. (As Foliage Spray) - For control of Alder prior to 
planting seedlings, apply 1-1/4 quarts of product per acre in B to 25 gallons of water, after most Alder leaves are full size. To 
increase penetration, 2 to 4 quarts per acre of diesel, fuel oil, kerosene, or a suitable approved agricultural surfactant at recommended 
label rates, may be added to the spray mixture. ' 
RESTRICTIONS AND LIMITATIONS FOR USE ON FORESTRY 
• For broadcast applications, do not apply more than 2-3/5 quarts product per acre. Do not make more than 1 application per' year. 
For basal spray, cut surface - stumps and frills, do not apply more than 5-1/2 quarts per 100 gallons of spray solution. 0'0 not 
make more than 1 basal spray or cut surface application per year. 
• For injections, do not .apply more than 2 ml of 4.0 Ibs ae formulation per injection site. Do not make more than 1 injection 
application per year. 
TANK MIXES 
Read and follow the label of each tank mix product used for precautionary statements, directions for use, geographic and other 
restrictions. Using this product and Buctril ME4 for weed control on cereal grains (wheat, barley and rye): Buctril ME4 Broadleaf 
Herbicide will control some annual weeds that are resistant to this proudct and may be tank mixed with this product for broader 
spectrum weed control on small grains. In cereal areas except Washington, Oregon and Idaho, use 1/4 to 1/2 pint of this product 
plus 1/2 to 3/4 pint of Buctril ME4 per acre. In Washington, Oregon and Idaho: use 1/4 to 1/2 pint of this product plus 3/4 to 1 pint 
Buctril ME4 per acre. First mix the this product in water then add the Buctril ME4. Use the higher rates for larger weeds or where 
weed growth is slow due to dry or cold weather. Apply before weeds are 6 inches high. Use 10 to 20 gallons total spray volume 
per acre with ground equipment or 5 to 10 gallons total spray volume with air application'. Use higher volume on larger weeds. 
Using this product and Sencor as knockdown herbicides for no-till: this product with Sen cor OF alone or in combination with Dual, 
Lasso, Surflan or Prowl may be applied as an early preplant surface application for the control of certain broad leaf weeds and 
grasses in soybeans in minimum or no-till products. Application is recommended 30 days prior to plantin'g. Apply at rate of 1-1/4 
pints of this product per acre with labeled rates of Sencor. Where grass herbicide is used in tank mix, apply at the rates specified 
on that product's label. 
Using this product and Turbo 8EC in reduced-tillage or no-till systems: This proudct may be applied in combination with Turbo 
BEC for the control of annual grasses and broadleaf weeds and the suppression of emerged perennial weeds when soybeans are 
directly seeded into a stale seedbed, cover crop or in previous crop residues. Special precautions: poor weed control andlor crop . 
injury may result if directions are not followed. Do not use a rib-type press wheel on your no-till planter 0 crop injury may result. 
Apply at a rate of 1-1/4 pints of this product per acre with labeled rates of Turbo 8EC. Application is recommended 30 days prior 
to planting. 
Using this product and Poast as a burndown prior to planting soybeans: for broad spectrum post-emergence weed control, a tank 
mix application of this proudct with Poast may be made for control of emerged broadleaf and grass weeds before planting 
soybeans. Apply at a rate of 2/3 pints of this product per acre with labeled rates of Poast. 
Using this product and Tahoe 3A tank mixtures for Non-Crop Areas: Broadleaf, Weed Control: Use 1-1/4 to 2-1/2 pints of this 
product per acre plus 2 to 6 pints Tahoe 4E (or 3 to 8 pints Tahoe 3A) per acre. For wider spectrum control of broadleaf weeds 
and woody plants, apply as a broadcast spray in enough water to deliver 20 to 100 gallons total spray per acre. Apply when 
broadleaf weeds are actively growing. Woody Plant Control Broadcast Foliar Spray: Use up to 2-3/5 quarts of this product per 
acre plus 1-112 to 3 quarts Tahoe 4E (or 2 to 4 quarts Tahoe 3A) per acre. Apply as a broadcast spray in enough water to deliver 
20 to 100 gallons total spray per acre. Apply when woody plants are actively growing. Woody Plant Control High Volume Leaf­
Stem Treatment with Ground Equipment: Use up to 2-3/5 quarts of this product per acre plus 1-1/2 to 12 pints Tahoe 4E (or 2 to 
16 pints Tahoe 3A) per acre. Mix 1/2 to 2 quarts of this, product plus 1-1/2 to 3 pints Tahoe 4E (or 2 to 4 pints Tahoe 3A) in 
enough water to make 100 gallons of spray. Apply at a volume of 100 to 400 gallons of total spray per acre depending on size 
and density of woody plants. Thoroughly wet all leaves, stems, and roots collars of plants to be controlled. Woody Plant Control 
Aerial Application (Helicopter only): Use up to 2-3/5 quarts of this product per acre plus 3 to 4 quarts Tahoe 4E (or 4 to 6 quarts 
Tahoe 3A) per acre. Apply in a total spray volume of 210 to 300 gallons per acre using drift control equipment such as Microfoil 
boom or an effective drift control agent such as Lo-Drift Spray Additive. Use the higher rates and volumes when plants are dense 
or under drought conditions. Do not make more than one application of this product plus this tank mix partner per year. 
Using this product and Diablo Herbicide tank mixtures for Non-Crop Areas: Annual broadleilf weeds: Use 1-1/4 to 2-1/2 pints 
of this product per acre plus 1/2 to 1-1/2 pints Diablo. For wider spectrum control of broadleaf weeds and, woody plants: Apply as 
12

( 
a broadcast spray in enough water to deliver 20 to 100 gallons total spray per acre: Apply when broadleaf weeds are actively 
growing. Use the higher rates when treating dense or tall vegetative growth. Do not apply more than 2 applications per year. The 
minimum interval between applications is 30 days. Do not apply more than 2-2/3 pints per acre per application. Perennial and 
Biennial Broadleaf Weeds: Use up to 2-213 pints of this product per acre plus 1/2 to 6 pints Diablo. Apply as a broadcast spray 
in enough water to deliver 20 to 100 gallons total spray per acre. Apply when broadleaf weeds are actively growing but prior to 
flowering. Use the lower rates for biennials less than 3 inches rosette diameter. Use the higher rates for perennial weeds or for 
biennial weeds past the 3 inch rosette stage. Do not apply more than 2 applications per year. The minimum interval between 
applications is 30 days. Do not apply more than 2-213 pints of this product per acre per application. Woody Plant Control 
Broadcast, High Volume, 'Stem Foliage or Aerial Application: Use up to 2-3/5 quarts of this product per acre plus 2 to 8 quarts 
Diablo. Apply as a broadcast spray in enough water to deliver 20 to 100 gallons total spray per acre or apply as a high, volume 
stem foliage spray in enough volume to thoroughly wet leaves, stems and root collars (100 to 400 gallons per acre) or apply 
aerially in enough water to deliver total spray volume of 10 to 30 gallons per acre using drift control equipment such as the 
Microfoil Boom or an effective drift control agent such as Lo-Drift Spray Additive. Use the higher rates and volumes when plants 
are dense or under drought conditions. Do not apply more than one application per 'year. 
Using this product and Patriot, Spyder and Telar: To improve control of som'e target species, this product may also be tank mixed 
with Escort, Oust, and Telar herbicides for post-emergent weed control. Tank mixes have shown improved control where resistant 
bio-types are present. 
NOTE: All intended tank mix combinations should be used only in recommended areas on the same broadleaf weed species 
found on both labels. 
For application methods and other use specifications, use the most restricted limitations from labeling of both products. 
Local conditions may affect the use of this chemical. Consult State Agricultural Extension or Experiment Station weed specialist 
for specific recommendations for local weed problems and for information on possible lower dosages, 
STORAGE AND DISPOSAL 
Do not contaminate water, food or feed by storage or disposal, 
PESTICIDE STORAGE: Always use original container to store pesticides in a secured warehouse or storage building, Containers 
should be opened in well ventilated areas. Keep container tightly sealed when not in use, Do not stock cardboard cases more than 
two pallets high, Do not store near open containers of fertilizer, seed or other pesticides. Do not contaminate water, food or feed 
by storage or disposal. 
PESTICIDE DISPOSAL:' Pesticide wastes are toxic. Improper disposal of excess pesticide, spray mixtures, or rinsate 
is a violation of Federal law and may contaminate groundwater. If container is damaged or if pesticide has leaked contain all 
spillage, Absorb and clean up all spilled material with granules or sand. Place in a closed labeled container for proper disposal. 
If these wastes cannot be disposed of by use according to label instructions, contact your State Pesticide or Environmental 
Control Agency, or the Hazardous Waste representative at the nearest EPA Regional Office for guidance. 
CONTAINER DISPOSAL: 
Nonrefillable Containers 5 Gallons or Less: Nonrefillable container. Do not reuse or refill this container. Triple rinse container (or 
equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank 
and d rain for 10 seconds after the flow begins to d rip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour 
rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to 
drip, Repeat this procedure two more times, Then offer for recycling or reconditioning, or puncture and dispose of in a 
sanitary landfill, or by other procedures approved by State and local authorities. Plastic containers are also disposable by 
incineration, or,if allowed by State and local authorities, by burning. If burned stay out of smoke. 
Nonrefillable containers larger than 5 gallons: Nonrefillable container, Do not reuse or refill this container. Offer for recycling if 
available, Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the 
remaining contents into application equipment or a mix tank. Fill the container 1/4 full with water. Replace and tighten closures. Tip 
container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container 
on its end and tip it back and forth several times. Turn the container over onto its other end and tip it back and forth several 
times, Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal, Repeat this procedure two 
more times. Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain 
for 10 seconds after the flow begins to drip, Hold container upside down over application equipment or mix tank and continue to 
drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank or collect 
rinsate for later use or disposal, Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 psi for at least 30 
seconds, Drain for 10 seconds after the flow begins to drip, 
Refillable containers larger than 5 gallons: Refillable container. Refill this container with pesticide only, Do not reuse this 
container for any other purpose. Cleaning the container before final disposal is the responsibility of the person disposing of the 
container. Cleaning before refilling is the responsibility of the refiller. To clean the container before final disposal, empty the remaining 
contents from this container into application equipment or a mix tank, Fill the container about 10% full with water and, if possible, 
spray all sides while adding water. If practical, agitate vigorously or recirculate water with the pump for two minutes. Pour or pump 
rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times. 
13

( 
. WARRANTY DISCLAIMER 
The directions for use of this product must be followed carefully. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, 
(1) THE GOODS DELIVERED TO YOU ARE FURNISHED "AS IS" BY MANUFACTURER OR SELLER AND (2) 
MANUFACTURER AND SELLER MAKE NO WARRANTIES, GUARANTEES, OR REPRESENTATIONS OF ANY KIND TO 
BUYER OR USER, EITHER EXPRESS OR IMPLIED, OR BY USAGE OF TRADE, STATUTORY OR OTHERWISE, WITH 
REGARD TO THE PRODUCT SOLD,INCLUDING, BUT NOT LIMITED TO MERCHANTABILITY, FITNESS FOR A PARTICULAR 
PURPOSE, USE, OR ELIGIBILITY OF THE PRODUCT FOR ANY PARTICULAR TRADE USAGE. UNINTENDED 
CONSEQUENCES, INCLUDING BUT NOT LIMITED TO INEFFECTIVENESS, MAY RESULT BECAUSE OF SUCH FACTORS AS 
THE PRESENCE OR ABSENCE OF OTHER MATERIALS USED IN COMBINATION WITH THE GOODS, OR THE MANNER OF 
USE OR APPLICATION, INCLUDING WEATHER, ALL OF WHICH ARE BEYOND THE CONTROL OF MANUFACTURER OR 
SELLER AND ASSUMED BY BUYER OR USER. THIS WRITING CONTAINS ALL OF THE REPRESENTATIONS AND 
AGREEMENTS BETWEEN BUYER, MANUFACTURER AND SELLER, AND NO PERSON OR AGENT OF MANUFACTURER OR 
SELLER HAS ANY AUTHORITY TO MAKE ANY REPRESENTATION OR WARRANTY OR AGREEMENT RELATING IN ANY 
WAY TO THESE GOODS. . 
LIMITATION OF LIABILITY 
TO THE EXTENT.CONSISTENT WITH APPLICABLE LAW, IN NO EVENT SHALL MANUFACTURER OR SELLER BE LIABLE 
FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, OR FOR DAMAGES IN THEIR NATURE OF PENALTIES 
RELATING TO THE GOODS SOLD, INCLUDING USE, APPLICATION, HANDLING, AND DISPOSAL. TO THE EXTENT 
CONSISTENT WITH APPLICABLE LAW, MANUFACTURER OR SELLER SHALL NOT BE LIABLE TO BUYER OR USER BY WAY 
OF INDEMNIFICATION TO BUYER OR TO CUSTOMERS OF BUYER, IF ANY, OR FOR ANY DAMAGES OR SUMS OF MONEY, 
CLAIMS OR DEMANDS WHATSOEVER, RESULTING FROM OR BY REASON OF, OR RISING OUT OF THE MISUSE, OR 
FAILURE TO FOLLOW LABEL WARNINGS OR INSTRUCTIONS FOR USE, OF THE GOODS SOLD BY MANUFACTURER OR 
SELLER TO BUYER. ALL SUCH RISKS SHALL BE ASSUMED BY THE BUYER, USER, ORHS CUSTOMERS. TO THE EXTENT 
CONSISTENT WITH APPLICABLE LAW, BUYER'S OR USER'S EXCLUSIVE REMEDY, AND MANUFACTURER'S OR 'SELLER'S 
TOTAL LIABILITY SHALL BE FOR DAMAGES NOT EXCEEDING THE COST OF THE PRODUCT. . 
If you do not agree with or do not accept any of directions for use, the warranty disclaimers, or limitations on liability,' do 
not use the product, and return it unopened to the Seller, and the purchase price will be refunded~ 
Direct-Spray, Wobbler, Mini Wobbler, Spirometer, Lo-Drift, and Buctril are registered trademarks of Bayer 
Surflan is a trademark of United Phosphorous Inc. 
Escort, Oust and Telc~r are trademarks of E.L DuPont de Nemours & Co. (Inc.) 
Poast is a trademark of BASF Corp. 
Dual is a trademark of Syngenta 
Lasso is a trademark of Monsanto Agri Co. 
Sencor is a trademark of Bayer 
. Turbo is a trademark of Nufarm Americas Inc. 
Prowl is a trademark of BASF 
Patriot, Spyder, Diablo and Tahoe are trademarks of Nufarm Americas Inc. 
14 
(RV111008RED)