crop-chem-docs/corpus/epa_ppls/228-676.md

# ETI 122 01 H-D

- EPA Reg No: **228-676**
- Registrant: NUFARM AMERICAS, INC.
- Signal word: Caution
- Active ingredients: Chlorsulfuron (62.5%); Metsulfuron-methyl (12.5%)
- Label accepted: 2024-08-28
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000228-00676-20240828.pdf

---
August 28, 2024 
 
Nikki Benson 
Regulatory Specialist 
Nufarm Americas Inc. 
11901 S. Austin Ave. 
Alsip, IL 60803 
 
Subject: Label Amendment - Registration Review Mitigation for Metsulfuron-methyl & 
Chlorsulfuron 
 Product Name: ETI 122 01 H-D 
 EPA Registration Number: 228-676 
 Application Dates: January 23, 2024 
Decision Numbers: 596159 & 594959 
 
Dear Nikki Benson: 
 
The Agency, in accordance with the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), 
as amended, has completed reviewing all the information submitted with your application to 
support the Registration Review of the above referenced product in connection with the 
Metsulfuron-methyl & Chlorsulfuron Interim Decisions, and has concluded that your submission 
is acceptable. The label referred to above, submitted in connection with registration under 
FIFRA, as amended, is acceptable. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please 
be aware that the website becomes labeling under the Federal Insecticide, Fungicide, and 
Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the 
product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 
40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In 
addition, regardless of whether a website is referenced on your product’s label, claims made on 
the website may not substantially differ from those claims approved through the registration 
process. Therefore, should the Agency find or if it is brought to our attention that a website 
contains false or misleading statements or claims substantially differing from the EPA approved 
registration, the website will be referred to the EPA’s Office of Enforcement and Compliance 
Assurance. 
 
A stamped copy of your labeling is enclosed for your records. This labeling supersedes 
all previously accepted labeling and must be used at your next label printing. You must

Page 2 of 2 
EPA Reg. No. 228-676 
Decision No. 596159 & 594959 
 
submit one copy of the final printed labeling before you release the product for 
shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may 
distribute or sell this product under the previously approved labeling for 12 months 
from the date of this letter. After 12 months, you may only distribute or sell this 
product if it bears this new revised labeling or subsequently approved labeling. “To 
distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation 
at 40 CFR 152.3. 
 
If you have any questions about this letter, please contact Caleb Carr by phone at (202) 566-
0636, or via email at carr.caleb@epa.gov. 
 
 Sincerely, 
 
 
 Linda Arrington, Branch Chief 
 Risk Management and Implementation Branch 4 
 Pesticide Re-Evaluation Division 
 Office of Pesticide Programs 
 
 
 
ENCLOSURE: Stamped label

CHLORSULFURON & 
METSULFURON METHYL GROUP 2 HERBICIDES
ETI 122 01 H-D
Dry Flowable
For Use on Wheat, Barley, and Fallow
ACTIVE INGREDIENTS: By Weight
Chlorsulfuron
2-Chloro-N-[(4-methoxy-6-methyl-1,3,5-triazin-2-yl)aminocarbonyl]benzenesulfonamide. . . . . . . . . . . . . 62.5% 
Metsulfuron Methyl
Methyl 2-[[[[(4-methoxy-6-methyl-1,3,5-triazin-2-yl)amino]carbonyl]amino]sulfonyl]benzoate. . . . . . . . . . . 12.5%
OTHER INGREDIENTS: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25.0%
 TOTAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100.0%
KEEP OUT OF REACH OF CHILDREN
CAUTION
FIRST AID
IF IN EYES: x Hold eye open and rinse slowly and gently with water for 15-20 
minutes.
x Remove contact lenses, if present, after the first 5 minutes, then 
continue rinsing eye.
x Call a poison control center or doctor for treatment advice.
IF ON SKIN 
OR 
CLOTHING:
x Take off contaminated clothing.
x Rinse skin immediately with plenty of water for 15-20 minutes. 
x Call a poison control center or doctor for treatment advice.
HOT LINE NUMBER
Have the product container or label with you when calling a poison control center or doctor, or 
going for treatment. You may also contact 1 -800-424-9300 for emergency medical treatment 
information.
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
Causes moderate eye irritation. Harmful is absorbed through skin. Avoid contact with skin, eyes, or 
clothing. Wash thoroughly with soap and water after handling. Avoid breathing dust or spray mist. 
PERSONAL PROTECTIVE EQUIPMENT
Applicators and other handlers must wear:
• Long-sleeved shirt and long pants;
• Waterproof gloves 
• Shoes plus socks
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for 
washables exist, use detergent and hot water. Kee p and wash PPE separately from other laundry.
EPA Reg. No. 228-676 EPA Est. No. 
Manufactured for:
Etigra™
501 Cascade Pointe Lane, Suite 103
Cary, NC 27513
www.etigra.com
Net Weight:
ETI 122 01 H-D contains chlorsulfuron
and Metsulfuron, the active ingredients 
used in Finesse®.
Aug 28, 2024
228-676

USER SAFETY RECOMMENDATIONS 
Users should: Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. 
 
ENVIRONMENTAL HAZARDS 
 
Groundwater Advisory: Chlorsulfuron and Metsulfuron-methyl are known to leach through soil into 
groundwater under certain conditions as a result of labe l use. This chemical may leach into groundwater if 
used in areas where soils are permeable, particularly where the water table is shallow. 
 
Surface Water Advisory: This product may impact surface water quality due to runoff of rain water. This is 
especially true for poorly draining soils and soils with shallow ground water. This product is classified as 
having high potential for reaching surface water via ru noff for weeks after application. A level, well-
maintained vegetative buffer strip between areas to which this product is applied and surface water features 
such as ponds, streams, and springs will reduce the po tential loading of chlorimuron-methyl from runoff 
water and sediment. Runoff of this product will be greatly reduced by avoiding applications when rainfall or 
irrigation is expected to occur within 48 hours. 
 
Non-target Organism Advisory: This product is toxic to plants and may adversely impact the forage and 
habitat of non-target organisms, including pollinators, in areas adjacent to the treated area. Protect the 
forage and habitat of non-target organisms by minimizing spray drift. For further guidance and instructions 
on how to minimize spray drift, refer to the Spray Drift Management section of this label. 
 
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
Do not apply this product in a way that will contact workers or other persons, either directly or through 
drift. Only protected handlers may be in the area during application. For any requirements specific to 
your State or Tribe, consult the agenc y responsible for pesticide regulation. 
Pesticide Handling 
• Calibrate sprayers using only clean water and away from well sites. 
• Schedule routine inspections of spray equipment. 
• Assure all operation employees are instructed in how to accurately measure pesticides. 
• Prepare only enough spray solution for the job at hand. 
• Avoid overfilling of spray tank. 
• Do not discharge excess material on the soil at a single spot in the field/grove or 
mixing/loading station. 
• Dilute and agitate excess solution and apply at labeled rates/uses. 
• Avoid storage of pesticides near well sites. 
• After triple rinsing the pesticide container, add the rinsate to the spray mix. 
 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard 40 CFR Part 
170. This Standard contains requirements for the protection of agricultural workers on farms, forests, 
nurseries, and greenhouses, and handlers of agricul tural pesticides. It contains requirements for training, 
decontamination, notification, and emergency assistance. It also contains specific instructions and 
exceptions pertaining to the statements on this la bel about personal protective equipment (PPE), and 
restricted-entry intervals. The requirements in this box only apply to uses of this product that are covered by 
the Worker Protection Standard. 
Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 4 hours. 
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that 
involves contact with anything that has been tr eated, such as plants, soil, or water, is: 
• Coveralls 
• Waterproof gloves 
• Shoes plus socks

ETI 122 01 H-D may only be used in accordance with this label or in separately published 
supplemental labeling. To the extent consistent with applicable law, Etigra will not be responsible for 
losses or damages resulting from the use of this product in any manner contrary to label directions. 
Do not apply this product through any type of irrigation system. 
 
WINDBLOWN SOIL PARTICLES 
This product has the potential to move off-site due to wi nd erosion. Soils that are subject to wind erosion 
usually have a high silt and/or fine to very fine sand fractions and low organic matter content. Other factors 
which can affects the movement of windblown soil incl ude the intensity and direction of prevailing winds, 
vegetative cover, site slope, rainfa ll, and drainage patterns. Avoid applyi ng this product if prevailing local 
conditions may be expected to result in off-site movement. 
 
WEED RESISTANCE MANAGEMENT 
 
For resistance management, ETI 122 01 H-D contains two Group 2 herbicides – chlorsulfuron and 
metsulfuron-methyl. Any weed population may contain or develop plants naturally resistant to ETI 122 01 H-
D and other Group 2 herbicides. The resistant biot ypes may dominate the weed population if these 
herbicides are used repeatedly in the same field. A ppropriate resistance-management strategies should be 
followed. 
 
When herbicides that affect the same biological site of action are used repeatedly over several years to 
control the same weed species in the same field, naturally-occurring resistant biotypes may survive a 
correctly applied herbicide treatment, propagate, and become dominant in that field. Adequate control of 
these resistant weed biotypes cannot be expected. If weed control is unsatisfactory, it may be necessary to 
retreat the problem area using a product affecting a different site of action. 
 
To delay herbicide resistance take one or more of the following steps: 
 
• Rotate the use of ETI 122 01 H -D or other Group 2 herbicides within a growing season sequence or 
among growing seasons with different herbicide groups that control the same weeds in a field. 
 
• Use tank mixtures with herbicides from a different group if such use is permitted; where information on 
resistance in target weed species is available, use th e less resistance-prone part ner at a rate that will 
control the target weed(s) equally as well as the more resistance-prone partner. Consult your local 
extension service or certified crop advisor if you are unsu re as to which active ingredient is currently less 
prone to resistance. 
 
• Adopt an integrated weed -management program for herbicide use that includes scouting and uses 
historical information related to herbicide use and crop rotation, and t hat considers tillage ( or other 
mechanical control methods), cultural ( e.g., higher crop seeding rates; precision fertilizer application 
method and timing to favor the crop and not the weeds), biological (weed-competitive crops or varieties) 
and other management practices. 
 
• Scout before and after herbicide application to moni tor weed populations for early signs of resistance 
development. Indicators of possible herbicide resist ance include: (1) failure to control a weed species 
normally controlled by the herbicide at the dose applied, especially if control is achieved on adjacent weeds; 
(2) a spreading patch of non-controlled plants of a particu lar weed species; (3) surviving plants mixed with 
controlled individuals of the same species. If resistan ce is suspected, prevent weed seed production in the 
affected area by an alternative herbicide from a different group or by a mechanical method such as hoeing 
or tillage. Prevent movement of re sistant weed seeds to othe r fields by cleaning harvesting and tillage 
equipment when moving between fields, and planting clean seed. 
 
• If a weed pest population continues to progress after treatment with this product, discontinue use of this 
product, and switch to another management strategy or herbicide with a different mode of action, if 
available. 
 
• Contact your local extension specialist or certifie d crop advisors for additional pesticide resistance -
management and/or integrated weed-management recommendations for specific crops and weed biotypes.

• [For further information or to report suspected resist ance, contact [Nufarm contact] at [one of][any of] the 
following] [[[X]-XXX-XXX-XXXX] [[,][or]] 1-800-345-3330 [[,][or]] [Nufarm e-mail address] [][,][or]] [Nufarm 
website] [[,][or]][XXXX]].] 
 
It is advisable to keep accurate records of pesticides applied to individual fields to help obtain information on 
the spread and dispersal of resistant biotypes. Contact your local sales representative, crop advisor, or 
extension agent to find out if suspected resistant weeds to this MOA have been found in your region. Do not 
assume that each listed weed is being controlled by this mechanisms of action. Co-formulated active 
ingredients are intended to broaden the spectrum of weeds that are controlled. Some weeds may be 
controlled by only one of the active ingredient in this product. 
 
Suspected herbicide-resistant weeds may be identified by these indicators: 
x Failure to control a weed species normally controlled by the herbicide at the dose applied, 
especially if control is achieved on adjacent weeds; 
x A spreading patch of non-controlled plants of a particular weed species; and 
x Surviving plants mixed with controlled individuals of the same species. 
 
Naturally occurring weed biotypes which have been shown to be resistant to AMBER® herbicide, ALLY® 
herbicide, GLEAN® FC herbicide, EXPRESS® herb icide or HARMONY® Extra herbicide will also be 
resistant to ETI 122 01 H-D. 
 
 
MANDATORY SPRAY DRIFT MANAGEMENT 
Aerial Applications: 
• Do not release spray at a height greater than 10 feet above the vegetative canopy, unless a greater 
application height is necessary for pilot safety. 
• For applications prior to the emergence of crops and target weeds, applicators are required to use a Coarse 
or coarser droplet size (ASABE S641). 
• For all other applications, applicators are required to use a Medium or coarser droplet size (ASABE S641). 
• The boom length must not exceed 65% of the wingspan for airplanes or 75% of the rotor blade diameter for 
helicopters. 
• Applicators must use ½ swath displacement upwind at the downwind edge of the field. 
• Nozzles must be oriented so the spray is directed toward the back of the aircraft. 
• Do not apply when wind speeds exceed 10 miles per hour at the application site. 
• Do not apply during temperature inversions. 
 
Ground Boom Applications: 
• Apply with the nozzle height recommended by the manufa cturer, but no more than 3 feet above the ground or 
crop canopy unless making a turf, pasture, or rangeland application, in which case applicators may apply with a 
nozzle height no more than 4 feet above the ground. 
• For applications prior to the emergence of crops and target weeds, applicators are required to use a Coarse 
or coarser droplet size (ASAE S572.3). 
• For all other applications, applicators are required to use a Medium or coarser droplet size (ASAE S572.3). 
• Do not apply when wind speeds exceed 10 miles per hour at the application site. 
• Do not apply during temperature inversions. 
 
Boom-less Ground Applications: 
• Applicators are required to use a Medium or coarser droplet size (ASAE S572.3) for all applications. 
• Do not apply when wind speeds exceed 10 miles per hour at the application site. 
• Do not apply during temperature inversions. 
 
SPRAY DRIFT ADVISORIES 
 
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT. BE AWARE OF NEARBY 
NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS. 
 
IMPORTANCE OF DROPLET SIZE 
An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide target 
pest control. While applying larger droplets will reduce spray drift, the potential for drift will be greater if 
applications are made improperly or under unfavorable environmental conditions. 
 
Controlling Droplet Size – Ground Boom

• Volume - Increasing the spray volume so that larger droplets are produced will reduce spray drift. Use the 
highest practical spray volume for the application. If a greater spray volume is needed, consider using a 
nozzle with a higher flow rate. 
• Pressure - Use the lowest spray pressure recommended for the nozzle to produce the target spray volume 
and droplet size. 
• Spray Nozzle - Use a spray nozzle that is designed for the intended application. Consider using nozzles 
designed to reduce drift. 
 
Controlling Droplet Size – Aircraft 
• Adjust Nozzles - Follow nozzle manufacturers recommendations for setting up nozzles. Generally, to reduce 
fine droplets, nozzles should be oriented parallel with the airflow in flight. 
 
BOOM HEIGHT – Ground Boom Use the lowest boom height that is compatible with the spray nozzles that 
will provide uniform coverage. For ground equipment, the boom should remain level with the crop and have 
minimal bounce. 
 
RELEASE HEIGHT - Aircraft 
Higher release heights increase the potential for spray drift. When applying aerially to crops, do not release 
spray at a height greater than 10 feet above the crop canopy, unless a greater application height is necessary 
for pilot safety. 
 
SHIELDED SPRAYERS 
Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify that 
the shields are not interfering with the uniform deposition of the spray on the target area. 
 
TEMPERATURE AND HUMIDITY 
When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation. 
 
TEMPERATURE INVERSIONS 
Drift potential is high during a temperature inversion. Temperature inversions are characterized by increasing 
temperature with altitude and are common on nights with limited cloud cover and light to no wind. The 
presence of an inversion can be indicated by ground fog or by the movement of smoke from a ground source 
or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind 
conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good 
vertical air mixing. Avoid applications during temperature inversions. 
 
WIND 
Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND 
CONDITIONS. 
Applicators need to be familiar with local wind patterns and terrain that could affect spray drift. 
 
Boom-less Ground Applications: 
• Setting nozzles at the lowest effective height will help to reduce the potential for spray drift. 
 
Handheld Technology Applications: 
• Take precautions to minimize spray drift. 
 
 
GENERAL INFORMATION 
 
ETI 122 01 H-D contains the active ingredients chlorsulfuron and metsulfuron-methyl which are 
herbicides recommended for control of many weeds found in wheat (including durum), barley and 
fallow. ETI 122 01 H-D is approved for use in all states (unless directed otherwise by supplemental 
labeling) except in the following counties in Co lorado: Alamosa, Conejos, Costilla, Rio Grande, and 
Saguache. 
ETI 122 01 H-D is a dry flowable formulation which is not corrosive, not flammable, and not volatile. It 
must be mixed with water, or slurried with water before addition to liquid nitrogen fertilizer solutions. A 
surfactant is to be added to the spray mix unless otherwise noted in other sections of this label. 
The directions for use in this label describe how to apply ETI 122 01 H-D to provide weed control either 
preemergence (before weeds germinate) or postemergence (when weeds have emerged and are 
actively growing). Preemergence applications are optimi zed by sprinkler irrigation or rainfall just after

application so that ETI 122 O1 H-D will penetrate the soil to a depth of 2" to 3" and reach the weed seed 
area or weed root zone. 
Several factors determine the length of time weed s are controlled and how well weeds are controlled, 
including the type of weeds present, density and size of weeds, and the weather conditions at 
application and after application. The type of weeds present as well as their size will determine which 
use rate to select. Refer to the tables bel ow on use rates and list of weeds controlled. 
ENVIRONMENTAL CONDITIONS AND BIOLOGICAL ACTIVITY OF ETI 122 01 H-D 
ETI 122 01 H-D moves into plants by absorption th rough the roots and foliage and rapidly inhibits the 
growth of susceptible weeds. 
For optimum preplant and preemergence control of target weeds, ETI 122 01 H-D needs to reach the 
weed roots. Rainfall after an application moves the ETI 122 01 H-D into the soil and the weed root 
zone, and weeds will not emerge. There may be some instances when susceptible weeds will 
germinate and emerge shortly after application. With in 3 to 5 days of emergence, these weeds will stop 
growing, although some species may stay green an d be stunted. Within one to three weeks after 
application, weed growth slows, leaves of suscepti ble plants become yellow to white in color, and 
growing points die. Weather conditions that are dry and cold tend to delay the movement of ETI 122 01 
H-D into the root zone, while wet and warm condition increases the speed in which effects of ETI 122 01 
H-D are seen. In postemergence applications, poor weed control may be observed if rainfall occurs 
shortly (within 6 hours) after application. 
 
Optimum control of weeds shaded by a rapidly growin g crop is achieved from use of ETI 122 01 H-D. 
Ineffective control of weeds may be seen where crop stands are thin or in sections with gaps in 
seeding. If the canopy of the crop completely in tercepts the spray solution, weed control will be 
reduced. ETI 122 01 H-D is less effective to weeds hardened off by cold weather or under stress from 
lack of water. Under these conditions, control is ac hieved using a: tank mix of ETI 122 01 H-D with 
other registered herbicides (such as 2, 4-D, or MCPA). 
 
 
INTEGRATED PEST MANAGEMENT 
ETI 122 01 H-D may be used as part of an Integrated Pest Management (IPM) program. This program 
relies on tillage (or other mechanical), biological, cultural, and chemical control practices to prevent 
economic pest damage. IPM principles and practice s include field monitoring, historical information 
related to herbicide use and crop rotation, correct identification of target pests, population monitoring, and 
treatment when target pest populations reach a locall y-determined action thresholds. Consult your state 
cooperative extension service, prof essional consultants or other qualified authorities to determine the 
action treatment threshold levels for treating specific pest/crop systems in your area. 
SPRAY EQUIPMENT 
Refer to the manufacturer's recommendations for additional information on GPA, pressure, speed, nozzle 
types and arrangements, nozzle heights above the target canopy, etc. 
Use calibrated air or ground eq uipment, and apply in a spray volume and delivery system to ensure 
thorough, uniform spray coverage of weed pests. Use precautions to minimize. drift. Higher spray 
volumes will produce better coverage to dense canopies of weeds. Do not overlap sprays. To avoid 
injury to desirable species, turn off spray booms while starting, turning, slowing, or stopping. 
Do not make applications using equipment and/or spray volumes or under weather conditions that might 
cause spray drift onto nontarget sites. Additional information is provided in the sections 
Spray Drift 
Management. 
Use application equipment that will ensure constant agitation of ETI 122 01 H-D spray solutions. 
Ground Application 
The use of flat-fan or low-volume flood nozzles wi ll provide optimum spray distribution and thorough 
coverage of spray solution. Use the following spray volumes for the type of nozzle selected: flat-fan 
nozzles - minimum 3 gal. per Acre (GPA); flood jet on 30 inch spacings - minimum 10 GPA; flood nozzles 
(TK10, or equivalent, or smaller) at 30 psi - minimum 30 GPA; jet TK 5 to TK 7.5 or equivalent - minimum 
13 GPA (40-inch spacing) to 20 GPA (60-inch spacing); "Raindrop" RA nozzles - minimum 20 GPA. It is 
essential to overlap the nozzles 100% for all spacings. Screens must be 50-mesh or larger.

Aerial Application 
Apply ETI 122 01 H-D at 1 to 5 gallons per Acre using spray nozzle types and arrangements that 
optimizes spray distribution and coverage. In Idaho, Oregon, or Utah, apply at a minimum of 3 gallons 
per Acre. 
 
To prevent drift into adjacent area s or onto sensitive crops, apply ETI 122 01 H-D by air using solid 
stream nozzles oriented straight back. To minimize sp ray drift, supplement aerial applications of ETI 122 
01 H-D with ground applications to borders and edges of fields. See additional precautions in the section 
Spray Drift Management. 
 
INSTRUCTIONS FOR PREPARING TANK MIXES OF ETI 122 01 H-D 
HOW TO MEASURE REQUIRED AMOUNTS OFETI 122 01 H-D 
The required amount of ETI 122 01 H-D can be measured using the volumetric cylinder supplied 
specifically for use with ETI 122 01 H-D. If you do not have a measuring cylinder, weigh the product 
using a balance that has scales calibrated in ounces. 
 
PREPARING A TANK MIX OF ETI 122 01 H-D 
1. Using clean fresh water, fill the spray tank ¼ to 1/3 full . If a liquid nitrogen fertilizer solution is used in 
place of water, refer to the table Tank Mixes with Other Products below for additional details. 
2. Begin agitation and then add the required amount of ETI 122 01 H-D. 
3. Allow the solution to agitate for 5 minutes to completely disperse the dry flowable ETI 122 01 H-D 
formulation. 
4. Continue agitation and fill the. spray tank ,with the remaining water. Do not add any other material 
until the ETI 122 01 H-D is thoroughly mixed with the water. 
5. As the tank is filling with the remaining amount of water, add any tank mix partners followed by the 
necessary volume of nonionic surfactant. Always add the surfactant last. Do not mix ETI 122 01 H-D 
with spray additives that reduce the pH of the spra y solution below 3.0. Additional information is 
found in the section on 
Surfactants below. 
6. NOTE: Continuous agitation is required or settling wi ll occur. Before spraying, reagitate the solution 
to ensure a uniform solution is sprayed. 
7. Make only a sufficient amount of ETI 122 01 H-D sp ray mixture that can be used within 24 hours of 
mixing. The product may degrade if allowed to sit unused. 
8. For application of multiple loads of ETI 122 01 H-D and a tank mix pa rtner, make a pre-slurry of ETI 
122 01 H-D in clean water and then add to the spray tank. This pre-mix helps to prevent the tank mix 
partner from interfering with the dissolution of th e ETI 122 01 H-D. Be sure all ETI 122 01 H-D is 
suspended in the spray tank solution before adding any tank mix partner. 
 
TANK MIXES 
Tank mixes of ETI 122 01 H-D with registered herbic ides may be applied to wheat, barley and fallow and 
will control or suppress weeds listed in the Weeds tables below, and other weeds either not listed on this 
label or that are resistant to ETI 122 01 H-D. Tank mixes. of ETI 122 01 H-D with insecticides and 
fungicides registered for use on wheat or barley, or wi th liquid fertilizers are permitted as directed in the 
section below on Tank Mixes with Other Products. Read and follow all manufacturers' label 
recommendations for the tank mix partner. Before tank mixing the tank mix product with ETI 122 01 H-D, 
be sure all recommendations on the herbicide labels do not conflict with those on this label. Read the 
section on Preparing a Tank Mix of ETI 122 01 H-D, above, regarding preparation of pre-slurries of ETI 
122 01 H-D before adding tank mix partners.

SURFACTANTS 
Always add an Etigra-authorized, nonionic surfactant to spray tanks unless directions elsewhere on this 
label recommend against this addition. The surfactant mu st have at least 80% active ingredient and is to 
be applied at 0.125 to 0.5% v/v (0.5 to 2 qt. per 100 gal of spray solution). 
Use the higher specified surfactant rate with spray volumes of 5 GPA or less and when low rates of ETI 
122 01 H-D are to be applied. A list of approved surfactants can be· obti3ined from your Agricultural 
dealer applicator or Etigra representative. Use an antifoaming agent if needed. 
Do not substitute low rates of liquid fertilizer for a surfactant. 
 
HOW TO CLEAN SPRAYER EQUIPMENT 
Clean all spray equipment before making an application of ETI 122 01 H-D. 
 
Immediately after an application or multiple applicat ions of ETI 122 01 H-D, clean all spray equipment 
using the cleanup procedures described on the labels of previously. applied products. If there are no 
cleanup directions, use the 6 step procedure describe d below before using this equipment to spray crops 
other than wheat or barley. After spraying is completed at the end of the day, rinse the interior of the tank 
with fresh water. Partially refill the tank with fresh water and flush the boom and hoses. These rinses will 
prevent deposits of dried pesticide residues that can remain in the application equipment. 
Residues of ETI 122 01 H-D that remain in the sp ray equipment may injure desirable crops if the 
equipment is used to make applications to crops othe r than barley or wheat. Use the following steps to 
clean all mixing and spray equipment immediately following applications of ETI 122 01 H-D: 
 
1. Drain the spray tank and then use fresh water to rinse the interior surfaces of the tank. Then 
flush the tank, boom, and hoses with water for at least 5 minutes. Physically remove any solid 
deposits that are found around the equipment. . 
2. Use fresh clean water to fill the tank and add one gallon of household ammonia (3%) † per 100 
gallons of water. Flush the boom, hoses, and nozzles with this cleaning solution. Completely fill 
the tank with fresh water arid circulate the solu tion through the tank and hoses for 15 minutes. 
Flush the boom; hoses, and nozzles, and then drain the tank. 
3. Remove· and clean the nozzles and screens separa tely. Use a bucket filled with the cleaning 
solution. 
4. Repeat step 2. 
5. Use clean water to rinse the tank, boom and hoses. 
6. If the cleaner used is only ammonia, the rinsate solution may be discarded by being applied to the 
wheat or barley. Do not exceed the maximum la beled use rate. If other cleaners are used, 
consult the cleaner label for rinsate disposal inst ructions. If no instructions are given, dispose of 
the rinsate on-site or at an approved waste disposal facility. 
† Other Etigra-approved cleaning solutions or differe nt strengths of ammonia solution can also be 
used as cleaning agents. Use the same amounts as noted in step 2, above. Carefully follow the 
directions for use on the labels of the individual cleaner. Consult your Agricultural dealer, applicator, 
or Etigra representative for a listing of approved cleaners. 
 
Notes for Sprayer Equipment Cleaning: 
• Do not use chlorine bleach with ammonia as dangerous gases will form. Clean equipment in well- 
ventilated areas. 
• Before following the above cleanout procedure for aerial spray tanks, a steam-cleaning of the tanks is 
recommended to aid in removing caked deposits. 
• Follow the most rigorous cleanout procedure for all pesticides which are tank-mixed with ETI 122 01 H- 
D.

• After completing the above cleanout procedure an d before using the sprayer equipment to make the 
next pesticide application, clean out the sprayer fo llowing the procedures on the pesticide product label 
that will be applied. 
• It is recommended that a dedicated sprayer be kept for ETI 122 01 H-D applications during the growing 
season. Dedicated equipment for ETI 122 01 H-D applications will help to minimize the potential for 
injury to ETI 122 01 H-D-sensitive crops if routine spraying practice s include equipment shared between 
applications of ETI 122 01 H-D and applications of other pesticides during the same spray season. 
 
CROP ROTATION 
Do not treat all acres (wheat, barley, fallow) at the sa me time with ETI 122 01 H-D if. rotational crop 
plantback flexibility is desired. 
 
FIELD BIOASSAY 
The following situations require a field bioassay before planting crops to areas previously treated with ETI 
122 01 H-D (refer to the tables in the section Crop Rotation for additional information): 1. The crop is not 
listed. 2. The soil pH is outside the specified range. 3. The use rate applied is not listed in the Rotation 
Crop Interval table. 4. The fields treated with ETI 122 01 H-D have not received the specified minimum 
cumulative precipitation since application. 
Test the crop intended to be planted the year following a treatment with ETI 122 01 H-D by growing the 
crop in small plots which received the ETI 122 01 H-D treatment. The crop response will determine the 
feasibility of rotating this crop to large areas whic h had been treated with ETI 122 01 H-D. Additional 
information on the procedures for carrying out field bi oassays can be obtained from your local dealer or 
Etigra representative. 
 
GRAZING RESTRICTIONS 
There are no grazing restrictions from applications of ETI 122 01 H-D.

AGRICULTURAL USES 
WHEAT AND BARLEY 
IMPORTANT PRECAUTIONS AND RESTRICTIONS 
Read the following restrictions and precautions to avoid injury to or loss of desirable trees or other 
desirable plants or vegetation. 
 
x Before using ETI 122 01 H-D, consult your state experiment station, university, or extension agent as 
to sensitivity of barley and wheat varieties to various herbicides. If the sensitivity of the crop variety 
is unknown, test ETI 122 01 H-D on a small area of the crop variety. 
x To avoid injury and/or temporary discoloration, do not apply ETI 122 01 H-D alone, in combination 
with surfactants, or with high rates of liquid ni trogen fertilizers to barley or wheat growing under 
conditions of stress (drought, extreme temperatur e changes, water-saturated soils, disease, or 
insect damage, low fertility). Injury to these crop s is possible if application is followed by severe 
winter stress including drought, disease, or insect damage. 
x To avoid injury to forages, do not apply ETI 122 01 H-D to barley or wheat which are undersown with 
legumes. 
x Do not apply ETI 122 01 H-D preplant, preemergence, or postemergence at rates lower than 2/10 oz. 
per Acre. 
x To avoid possible crop injury to desirable trees or vegetation, 1) do not use this product on lawns, 
walks, driveways, tennis courts, or similar areas; 2) use caution to avoid spray drift or direct or 
indirect contact of sprays onto. desirable plants or areas adjacent to treated fields; 3) do not apply, 
drain or flush equipment rinses on or near desi rable trees or other plants, on areas where their 
roots may extend, or in areas where the produc t may be washed or moved into contact with 
desirable plant roots. 
x To minimize off-site movement of product on tr eated soils which can lead to damage of susceptible 
crops, do not apply if soils are powdery, dry or light, or sandy unless rainfall, mulch or other 
cultural practices stabilize these soils. Treated soil particles may move off-site to non-target crop 
sites through wind or water. Low levels of ETI 122 01 H-D may injure or kill crops other than 
barley and wheat. 
x Improved weed control in wheel track areas is achieved when ETI 122 01 H-D is tank mixed with 2,4- 
D or MCPA and applied by ground postemergence to weeds under dry, dusty field conditions. 
x If wheat has germinated and has emerged above the soil surface, do not make preemergence 
applications of ETI 122 01 H-D to wheat fields. 
x Do not make preemergence applications of ETI 122 01 H-D to wheat planted into dry soil ("dusted in") 
or on very coarse, uneven seedbeds. 
x To avoid the possibility of surface runoff, do not apply ETI 122 01 H-D to frozen ground or to snow- 
covered ground. 
x Do not apply ETI 122 01 H-D to irrigated land if the tailwater will be used to irrigate other crops. 
x Clean all spray equipment according to the directions in this label. Residues remaining in spray 
equipment may damage crops (other than wheat and barley). 
x Read and follow the rotation crop restrictions on labels of products such as GLEAN® FC, ALLY®, 
Amber®, Assert®, or other longer residual herbic ides with the same mode of action that have 
been used on land that may be treated with ETI 122 01 H-D. Follow the label that has the longest 
rotation crop plantback interval before choosing to rotate to crops other than wheat or barley.

WEEDS: Refer to the list of weeds controlled at different use rates in the table below. 
 
WEEDS CONTROLLED AT THE RATES LISTED BELOW 
2/10 to 3/10 ounce per Acre of ETI 122 01 H-D 
Blue Mustard Fixweed § # Redstem filaree 
Broadleaf dock Groundsel Redroot pigweed 
Bur beakchervil Hempnettle Shepherd's purse 
Bur buttercup (testiculate) Henbit Smallseed falseflax 
Carolina geranium Lady's thumb Smooth pigweed 
Chickweed 
mouseear) 
(common, jagged, Lambsquarters Tansymustard § # 
Conical catchfly Mayweed chamomile Treacle mustard (Bushy wallflower) 
Corn spurry Miners lettuce Tumble mustard (Jim Hill) 
Cow cockle Pineappleweed Virginia pepperweed 
Curly dock ,. Prickly lettuce € # White cockle 
Cutleaf evening primrose Prostrate pigweed Wild mustard 
False chamomile Plains coreopsis Wild carrot 
Field pennycress Purslane 
3/10 to 4/10 ounce per Acre of ETI 122 01 H-D 
Annual bluegrass § # Corn gromwell § # Russian thistle § # € 
Annual ryegrass § # Dove foot geranium Speedwell (common, ivyleaf) § 
Annual sowthistle Green foxtail (pigeongrass) § Sunflower# 
Bedstraw§# Knotweed (prostrate) § # Vetch# 
Bromus species (cheat, downy brome, 
Japanese brome) § # 
Kochia § # € Wild buckwheat # 
Canada thistle § # Pennsylvania smartweed § Wild radish # 
Coast fiddleneck (tarweed) Prickly POPPY (pinnate) 
5/10 ounce per Acre of ETI 122 01 H-D 
Bromus species (cheat, downy 
brome, Japanese brome) § # 
Annual ryegrass § # 
§ These weeds are suppressed and/or controlled by ETI 122 01 H-D. Evidence of suppression includes a visual 
reduction in numbers of weeds as wel l as a significant loss of vigor. The extent that weeds are suppressed by 
ETI 122 01 H-D will depend on the use rate, weed size at application and post- application environmental 
conditions. 
# Refer to the section Additional Directions for Specific Weeds for additional information on these weeds. 
€ Naturally-occurring resistant biotypes of these weeds are known to occur. Refer to the sections Tank Mixes and 
Additional Directions for Specific Weeds for additional information. 
 
 
USE RATES: Refer to the table below. 
 
Timing of 
Application 
 
Crop 
Use Rate, oz. 
ETI 122 01 H-D 
per Acre 
 
Other Application Directions 
 
Restrictions 
Preplant or 
Preemergence 
Spring 
wheat 
2/10 to 4/10 oz. See Footnote 1. 
See Footnote 2. 
Do not apply to Durum and 
Wampum varieties of spring 
wheat
 (refer to Postemergence 
use directions). 
MN, MT, ND, SD, WY: Do not 
apply more than 3/10 oz. per 
Acre. 
 See Footnote 3. 
Preplant Winter 
wheat 
2/10 to 4/10 oz. Apply before wheat is planted. 
See Footnote 1.

Timing of 
Application 
 
Crop 
Use Rate, oz. 
ETI 122 01 H-D 
per Acre 
 
Other Application Directions 
 
Restrictions 
 See Footnote 2. 
Preemergence Winter 
wheat 
2/10 to 5/10 oz. Apply after planting but prior to 
emergence of wheat. The 5/10 
oz. rate should be reserved for 
suppression of bromus species 
and annual ryegrass. 
See Footnote 1. 
See Footnote 2. 
MN, MT, ND, SD, WY: Do not 
apply more than 3/10 oz. per 
Acre. 
See Footnote 3. 
Postemergence Wheat 
and 
Barley 
2/10 to 4/10 oz. Apply any time after the crop is in 
the 1-leaf stage, but before the 
boot stage. 
To avoid crop injury, do not apply 
ETI 122 01 H -D during the boot 
stage or early heading stage. 
 See Footnote 1. To prevent injury to crops, do not 
use ETI 122 01 H -D within 60 days 
of crop emergence if 
 organophosphate insecticides 
(such as disulfoton (Di- Syston®) 
etc.) have been used as an in- 
furrow treatment. 
 Greater crop injury may result 
 from a combination of stress from 
herbicide application and cold 
weather than from pesticide 
application or cold weather alone. 
Delay applications of ETI 122 01 
H-D in areas such as the Pacific 
Northwest and Northern Plains if 
cold conditions exist or are 
unpredictable.
 Make applications 
after the weather improves and 
after the crop begins to grow 
vigorously (after
 
the 1 to 4-leaf stage. 
Postemergence 
MN, MT, ND, SD, 
WY ONLY: 
Spring 
and 
Winter 
Wheat 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
4/10 oz. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
• 
 
For suppression of Green Foxtail 
(pigeongrass), Yellow Foxtail and 
Persian Darnel. 
Foxtail/Pigeongrass (Green 
and Yellow): Make application 
Make only one application per crop 
cycle. To avoid crop injury, do not 
apply ETI 122 01 H -D during the 
boot stage or early heading stage. 
 
 
 
 
 
 
 
in the fall or spring, or in the 
spring to land which was fallow 
the previous year. Include a 
surfactant in the spray solution. 
Spray weeds that are less than 
1" tall or before the 1
-2 leaf 
stage. 
For suppression, ½ to 1" rainfall 
is required after application to 
move ETI 122 01 H
-D into the 
weed root zone before weed 
seed germination and to 
suppress foxtail before the 2-3 
leaf
 stage. Inadequate 
suppression may occur without 
adequate rainfall if foxtail 
reaches the 2-3-leaf stage. 
 
When applied in the fall, ETI 122 
01 H-D will provide more 
consistent weed suppression in 
most areas because adequate 
rainfall
 occurs to activate ETI 122 
01 H-D. When applied in the late 
spring, ETI 122 01 H-D may not 
give consistent weed suppression 
due to lack of adequate rainfall. 
Insufficient 
rainfall will not move ETI 122 01 
H-D into the weed root zone, and 
weeds that germinate after treatment 
will not be controlled. However, too 
much rainfall may also
 result in poor 
suppression of

Timing of 
Application 
 
Crop 
Use Rate, oz. 
ETI 122 01 H-D 
per Acre 
 
Other Application Directions 
 
Restrictions 
 weeds. 
Persian Darnel: Make application in.the fall or spring. Include a surfactant in the spray solution and apply before weeds 
are past the 2 leaf stage. For suppression, ½ to 1" rainfall is required after application to move ETI 122 01 H-D into the 
weed root zone before weed seed germination and to suppress Persian Darnel before the weed passes the 2- 3 leaf stage. 
Inadequate suppression may occur without adequate rainfall if Persian Darnel reaches the 3-leaf stage. 
Footnote 1: Apply tank mixes of ETI 122 01 H-D and other products registered for preplant/preemergence (or postemergence) use on 
these crops (such as "Roundup"). 
Footnote 2: To prevent injury to crops, do not use ETI 122 01 H-D if organophosphate insecticides (such as disulfoton (Di-Syston®) etc.) 
have been or are intended to be used as an in-furrow treatment. 
Footnote 3: Delayed seedling emergence and/or crop stress may result from a preemergence application to late fall plantings under cold 
 weather and/or dry conditions. Preemergence applications may also injure wheat seeded less than 1" deep. It is recommended that a 
postemergence application be made when the crop has emerged and shows good vigor. 
 
FALLOW 
Use ETI 122 01 H-D as a fallow treatment at 2/10 to 4/10 oz. per Acre, Apply in the spring or fall to 
actively growing weeds that have emerged. If applie d with other herbicides, ensure that the tank mix 
partners are registered for use in fallow. Read the section above on Tank Mixes before using with ETI 
122 01 H-D. 
TANK MIXES WITH OTHER PRODUCTS 
Before making postemergence tank mix applications of ETI 122 01 H-D and other registered herbicides, 
or sequential applications of ETI 122 01 H-D and other registered herbicides, read the additional 
information on Tank Mixes above. Refer to the table below for specific directions for tank mixes with 
other products. 
 
Tank-Mix· Partner 
and Use Rate 
Application Directions Timing and Restrictions 
; 
Insecticides Only insecticides registered for use on 
wheat, barley and fallow may be used in 
these tank mixes. 
There are certain conditions (such as stress from 
drought, cold weather or warm days/cold nights 
post
-application, or crops in the 2- 4 leaf stage), 
when tank mixes or sequential treatments of ETI 
122 01 H-D and organophosphate insecticides 
(such as methyl or ethyl parathion, disulfoton, 
etc.) should be avoided. Temporary crop 
yellowing or crop injury may occur unless these 
tank mixes have been tested on a small plot. If 
signs of crop injury do not occur, larger areas may 
be treated. 
 
Do not apply ETI 122 01 H-D plus Malathion. 
Crop injury may occur from this tank mix. 
 
When an organophosphate insecticide such as 
disulfoton (Di-Syston®) has been applied in- 
furrow, crop injury may occur if ETI 122 01 H-D is 
applied within 60 days of crop emergence. 
Pacific Northwest: Do not apply ETI 122 01 H- D 
plus Lorsban. Crop injury may occur from this 
tank mix. 
Fungicides Only fungicides registered for use on wheat, 
barley, and fallow (mancozeb such as 
Manzate®
 200DF fungicide) may be used in 
these tank mixes. 
Apply at the normal time when herbicides and 
fungicide treatments overlap.

• 
Tank-Mix Partner 
and Use Rate 
Application Directions Timing and Restrictions 
Liquid Fertilizers Liquid fertilizers may replace water as the 
carrier in spray solutions. Check for 
physical compatibility before mixing ETI 122 
01 H-D in liquid fertilizers. When tank 
mixing ETI 122 01 H-D, use the more 
compatible ester formulations of 2,4 -D or 
MCPA. Add a surfactant when using low 
rates of liquid nitrogen fertilizers (less than 
50% of spray solution by volume). Crop 
injury may occur if a surfactant is used at 
higher rates of liquid nitrogen fertilizers. 
Local recommendations may provide 
additional information on when to add 
surfactants. 
Do not use ETI 122 01 H-D plus with liquid 
fertilizers that have a pH of 3.0 or less. The low 
pH can lead to degradation of ETI 122 01 H -D. 
Increased chances of crop injury may occur when 
surfactants are added to liquid fertilizer tank 
mixes of ETI 122 01 H-D plus 2,4-D ester or 
MCPA ester. Test this tank mix on a small area 
of the crop and if no signs of injury are observed, 
larger areas may be treated. 
Do not use low rates of liquid fertilizer solution as 
a substitute for a surfactant. 
Herbicides such as: 
 
Bromoxynil 
(such as BUCTRIL® 
4EC - ¼ to 1 pt. per 
Acre, or BRONATE® - 
½ to 2 pt per Acre, or 
CURTAIL - 1 to 2 pt. 
per Acre) 
 
Dicamba 
(such as BANVEL® or 
Clarity - 1/8 to ¼ pt. 
per Acre, or BANVEL®. 
SGF - ¼ to ½ pt. per 
Acre) 
 
Metribuzin 
(such as Sencor DF - 
1.5 to 8 oz. Al per 
Acre) 
These tank mixes can be used to improve 
control of weeds not listed on this label. 
If Assert"" is used in the tank mix with ETI 122 01 
H-D, always add a third broadleaf herbicide that 
has a different mode of action (such as MCPA 
ester or 2,4-D ester). Use a surfactant if 
recommended on the tank mix partner label. If 
crops receive heavy rainfall shortly after 
application, some temporary crop discoloration, 
stunting or injury may occur. 
 
Some broadleaf weeds may not be completely 
controlled from tank mixes with Dicamba (such as 
Banvel, Banvel SGF and Clarity). 
 
Optimum wild oat control may not be achieved 
with tank mixes of ETI 122 01 H- D with Hoelon 
3EC. 
2,4-D (Amine or 
Ester) 
OR 
MCPA (Amine or 
Ester) 
 
¼ to ½ lb. Al per Acre 
Apply after weeds have emerged. The ester 
formulations of 2,4-D or MCPA provide best 
control. Use 2/10 to 4/10 oz. per Acre of ETI 
122 01 H-D. Add a surfactant if desired (½ 
to 1 qt. per 100 gal. of spray solution) but the 
potential for crop injury increases. If a liquid 
fertilizer is added to the spray tank· 
mix, do not add a surfactant. 
For tank mixes with MCPA, apply after the 3- to 5- 
leaf stage but before boot. 
For tank mixes with 2,4-D, apply after tillering 
(consult the recommendations on the 2, -4-D 
label) but before boot. 
 
To avoid severe crop injury and/or foliar burn, the 
use of liquid fertilizers in either of these tank 
mixes is not recommended when temperatures 
are below 32°F or if the crop is under stress from 
cold weather just before winter dormancy. 
Diuron (such as 
Karmex DF or Direx 
80 DF) 
1 to 1.5 lb per Acre 
(or Direx 4L, 0.8 to 1.2 
qt. per Acre) 
This tank mix is useful to control problem 
weeds such as wild buckwheat, corn 
gromwell, green foxtail (pigeongrass) 
annual
 ryegrass and annual bluegrass. Use 
3/10 to 4/10 ETI 122 01 H-D. 
Best results are obtained if rainfall (1/2 to 1 inch) 
occurs within 7 to 14 days after application. 
Carefully read and follow the label guidelines and 
restrictions for the use of diuron to ensure there 
are no conflicts with the ETI 122 01 H
-D label. 
Follow the label with the most restrictive 
directions. 
Everest® This tank mix improves control of weeds in 
wheat. 
Carefully read and follow the label guidelines and 
restrictions on the Everest® label. Do not use this 
tank mix if any directions on the Everest® label 
conflict with directions on this label. Follow the 
label with the most restrictive directions.

Tank-Mix Partner 
and Use Rate 
Application Direction Timing and Restrictions 
Maverick® This tank mix improves control of weeds in 
wheat. 
Carefully read and follow the label guidelines and 
restrictions on the Maverick®· label. Do not use 
this tank mix if any directions on the Maverick® 
label conflict with directions on this label.· Follow 
the label with the most restrictive directions. 
Starane® 
1/3 to 1 1/3 pints 
per acre 
This tank mix improves control of Kochia {2- 
4"), Russian thistle, mustard species, and 
wild buckwheat in wheat, barley, and fallow. 
Carefully read and follow the label guidelines and 
restrictions on the Starane® label. Do not use this, 
tank mix if any directions on the Starane® label 
conflict with directions on this label. Follow the 
label with the most restrictive directions. 
Starane® + Salvo® 
2/3 to 2 2/3 pints 
per acre 
This tank mix improves control of Kochia {2- 
4"), Russian thistle, mustard species, and 
wild buckwheat in wheat, barley, and fallow. 
Carefully read and follow the label guidelines and 
restrictions on the Starane® + Salvo® label. Do 
not use this tank mix if any directions on the 
Starane® + Salvo® label conflict with directions on 
this label. Follow the label with the most 
restrictive directions. 
Starane® + Sword® 
¾ to 2 3/4 pints per 
acre 
This tank mix improves control of Kochia (2- 
4"), Russian thistle, mustard species, and 
wild
 buckwheat in wheat, barley, and fallow. 
Carefully read and follow the label guidelines and 
restrictions on the Starane® + Sword® label. Do 
not use this tank mix if any directions on the 
Starane® + Sword® label conflict with directions 
on this label. Follow the label with the most 
restrictive directions. 
 
ADDITIONAL DIRECTIONS FOR SPECIFIC WEEDS 
 
 
Annual 
Bluegrass/Annual 
Ryegrass 
Preemergence: 5/10 oz. per Acre ETI 122 01 H-D. Apply after planting but before winter 
wheat emerges OR apply after planting, before wheat emerges followed by an application of 
metribuzin at 2.25 to 4.5 oz. Al per Acre; apply metribuzin in the fall when the wheat is at the 
4-5 leaf stage and annual grassy weeds are in the 1-3 leaf stage. 
Preemergence control in the Pacific Northwest: A tank mix of ETI 122 01 H-D (3/10 to 
4/10 oz. per Acre) plus Diuron DF (1.5 lb per Acre) improves control of these weeds. Ensure 
adequate rainfall (½ to 1") will occur after application to move ETI 122 01 H -D into the root 
zone of weeds before bluegrass or ryegrass emerges 
Postemergence: Use 2/10 to 4/10 oz. per Acre ETI 122 01 H-D as a tank mix with metribuzin 
at 2.25 to 3 oz. Al per Acre. Apply after the wheat (4-5 leaf stage) and grass weeds (1-3 leaf 
stage) have emerged. 
Bedstraw 4/10 oz. per Acre ETI 122 01 H-D. If applied postemergence, use ETI 122 01 H-D plus a 
surfactant (2 qt. per 100 gal. of spray solution) and apply before bedstraw is over 2 inches long. 
Bromus species (cheat, 
downy brome, 
Japanese brome) 
These grasses are best suppressed from an application of ETI 122 01 H-D in a tank mix with 
metribuzin, or as an alternate, from sequential applications of these herbicides. Refer to the 
use directions for wheat, barley and fallow on the metribuzin label. 
For ETI 122 01 H-D and metribuzin to be most effective, sufficient rainfall (1/2 to 1") is required 
so that ETI 122 01 H-D and metribuzin move into the weed root zone before these weeds 
germinate and develop an established root system. These weed will not be suppressed if 
there is an insufficient amount of rainfall. Too much rainfall may result in crop injury. 
When the weather turns cold, there is a risk for crop injury and ineffective weed suppression. 
Apply metribuzin (such as "Sencor" DF) prior to winter dormancy of the crop and grassy 
weeds. Do not add any other pesticide to tank mixes of ETI 122 01 H-D and metribuzin and 
use the surfactants recommended on either the ETI 122 01 H-D or metribuzin labels. Some 
wheat and barley varieties are sensitive to metribuzin so refer to the metribuzin label for a list 
of these varieties. 
Preemergence and Sequential: 5/10 oz. per Acre of ETI 122 01 H-D. Apply after planting 
winter wheat and prior to its emergence. Follow this application with a sequential application 
of 2.25 to 3 oz. Al per Acre of metribuzin applied in the fall after the wheat has reached the 4 
to 5-leaf stage of growth and the annual grassy we eds are in the 1 to 3-leaf stage of growth. 
Idaho, Oregon, and Washington: 4/10 to 5/10 oz. per Acre of ETI 122 01 H-D. Apply 
after planting winter wheat and prior to its emergence. A sequential application of

metribuzin may be made to aid in suppression of these weeds. Apply 1.5 to 3 oz. Al per 
Acre metribuzin in the fall to wheat (2-leaf to 3 tiller stage) or 3.75 to 6 oz. Al per Acre. 
after winter wheat is actively growing with at least 4 tillers and 2 inches of secondary root 
systems. 
Postemergence: 2/10 to 4/10 oz. per Acre ETI 122 01 H-D plus 2.25 to 3 oz. Al per Acre 
metribuzin. Treat wheat (at the 4 to 5-leaf stage) and weeds (at the 1 to 3- leaf stage) that 
have emerged. 
Idaho, Oregon, and Washington: 3/10 to 4/10 oz. per Acre ETI 122 01 H-D plus 1.5 to 3 
oz. Al per Acre metribuzin. Apply in the fall when wheat or barley are at the 2-leaf to 3- 
tiller stage. When these crops are actively growing with at least 4 tillers and at least 2 
inches of secondary root system, apply ET I 122 01 H-D at 3/10 to 4/10 oz. and metribuzin 
at 3.75 to 6 oz. active per Acre. Best results will be obtained if application is made before 
the weeds reach the 2 to 3-leaf stage. Refer to the metribuzin label for additional 
information on treating these weeds. 
Canada thistle Time the application of ETI 122 01 H-D to occur after the majority of thistles emerge, are small 
(rosette stage to 4" - 6" tall) and are actively growing. Annual treatments may provide 
maximum long-term results. Include a surfactant with ETI 122 01 H-D spray solutions. 
Corn gromwell Postemergence: Applications work best from 4/10 oz. per Acre ETI 122 01 H-D plus 
bromoxynil (such as Buctril or Bronate). Spray small, actively growing weeds. 
Flixweed, 
Tansymustard 
 Postemergence: Applications work best from ETI 122 01 H-D in tank mixes with 2,4-D or 
MCPA (amine or ester). Spray actively growing weeds. 
Kochia, Russian thistle, 
Prickly lettuce 
These weeds are known to have naturally occurring resistant biotypes which can be best 
controlled from application of ETI 122 01 H-D in the spring when weeds are less than 2" tall or 
2" across and are actively growing. A tank mix of ETI 122 01 H-D plus dicamba (such as 
"Banvel"/Banvel SGF/'Clarity") and/or 2, 4-D should be applied with a surfactant (2 qt. 
surfactant per 100 gal. of spray solution). 
Prostrate knotweed Preemergence: 3/10 to 4/10 oz. per Acre ETI 122 01 H-D. Apply in the fall. 
Postemergence: Applications work best with 3/10 to 4/10 oz. per Acre ETI 122 01 H-D plus 
either 2, 4-D, MCPA, dicamba (such as "Banvel" /’Banvel SGF”/”Clarity") and/or bromoxynil 
(such as Buctril or Bronate). Include a surfactant in the tank mix. Spray emerged seedlings 
(no more than 4 true leaves) that are actively growing. 
Sunflower Postemergence: Wait until the majority of sunflowers have emerged but before they are 
more than 2 inches in height before making an ETI 122 01 H-D application. The surfactant 
rate should be 2 qt. per 100 gal. of water. 
Preemergence: Make an application of ETI 122 01 H-D in the early spring. Spring rainfall 
should move the ETI 122 01 H -D into the weed root zone which should prevent weed 
germination or weed root system development. 
NOTE: If applied in the fall in areas where rain fall is significant, the residual activity of ETI 122 
01 H-D may not provide adequate control of this weed. ETI 122 01 H-D applied in the spring 
may not control deep-germinating sunflowers that emerge. 
Vetch Postemergence: Applications work best from 4/10 oz. per Acre ETI 122 01 H-D plus 1/4 lb Al 
per Acre of 2,4-D or MCPA (amine or ester). Include a surfactant in the tank mix. 
Wild buckwheat Preemergence: 4/10 oz. per Acre of ETI 122 01 H-D applied in the fall or early spring 
provides optimum results. 
Postemergence: 4/10 oz. per Acre ETI 122 01 H-D plus 2,4-D, MCPA, dicamba (such as 
BANVEL®/BANVEL® SGF or Clarity), and/or bromoxynil (such as BUCTRIL® or 
BRONATE®) provide optimum results . Spray emerged seedlings that are actively growing. 
Although 3/10 oz. per Acre ETI 122 01 H-D may control this weed, consult local Etigra 
recommendations on directions for treating this weed. 
Wild radish 3/10 to 4/10 oz. per Acre ETI 122 01 H-D. Optimum results are achieved if ET) 122 01 H-D is 
applied postemergence. 
 
CROP ROTATION 
Do not treat all acres (wheat, barley, fallow) at the same time with ETI 122 01 H-D if rotational crop 
plantback flexibility is desired. Be fore using ETI 122 01 H-D, plan your application and rotation crop 
strategy. Follow the rotation crop intervals specified in the tables below. The tables below note

Cumulative Precipitation in inches, which is defined as the amount of rainfall received from the date of 
ETI 122 01 H-D application to the date of planting. Do not rotate to the· crops listed in the tables below 
until the next growing season if the listed cumulative precipitation has not been received. A field bioassay 
must be conducted in certain states under certain conditions. 
 
Minimum Rotation Intervals 
Minimum recropping (or rotation crop) intervals for planti ng crops to fields previously treated with ETI 122 
01 H-D are defined as the amount of time that must elapse from the last application to the anticipated 
date of the next planting. These intervals have be en established based on how quickly ETI 122 01 H-D 
breaks down in the soil. Factors that influence the ra te of breakdown include soil pH, soil temperature, 
soil microbes, and soil moisture. Soils that have a low pH (less than 7.0), high moisture (regions that 
receive over 20" of annual rainfall), and high soil temperatures (greater than 40°F) facilitate the 
breakdown of ETI 122 01 H-D in soil. Conversely, so ils with high soil pH, low moisture and low soil 
temperatures tend to break down ETI 122 01 H-D more slowly. Due to the variations from year to year in 
rainfall and soil temperatures and from region to region, it is important to monitor soil temperatures and 
soil moisture when crops will be planted back to ETI 122 01 H-D treated areas. 
 
Soil pH Limitations 
If soils have a pH above 7.9, ETI 122 01 H-D should not be applied to these fields or residues of ETI 122 
01 H-D may persist. This residual activity may require crop rotation intervals longer than the timing listed 
in the table below in order to avoid injury to barley or wheat or other sensitive crops. To avoid crop injury 
or stress due to low soil pH levels and aluminum toxicity, do not apply ETI 122 01 H-D to soils that have a 
pH below 5.0. 
 
Testing Soil pH: Do not apply until you have tested the soil pH in areas where treatment is planned. To 
determine the pH of the soil, sample soils taken from different, representative areas at depths of between 
0 and 4 inches. Send the samples to a laboratory for individual pH determinations. Additional information 
on soil sampling can be obtained from local extension publications. 
 
Rotation Crop Intervals for Cereal Crops 
The minimum recropping intervals are based upon the soil pH, the rate of ETI 122 01 H-D applied and the 
location. The minimum-recropping interval is the amount of time that must elapse from the date of the 
last application to the anticipated date of planting . The crops that can be rotated are listed under the 
corresponding minimum recropping interval column in the table below. 
 
 
 
Location 
 
 
Soil pH† 
 
Use Rate 
(oz./Acre) 
Minimum Recropping Interval 
 
O Months 
 
4 Months 
 
10 Months 
 
16 Months 
CO, NE 
(Panhandle), 
Southeastern 
WY 
7.9 or lower 2/10 to 4/10 W/R/T O and B 
NE, KS, OK, 
and TX 
7.9 or lower 2/10 to 4 /10 W/R/T O and B 
7.9 or lower 5/10 W/R/T O B 
ID, OR, WA, MT, ND, 
SD, and WY (except 
Southeastern WY) 
6.5 or lower 2/10 to 4/10 W/R/T O and B 
6.6 to 7.9 2/10 to 4/10 W/R/T O B 
W/R/T = wheat, rye, triticale; B = barley; O = oats (use the rotation interval specified for Barley when rotating to 
Durum wheat and Wampum variety of Spring Wheat) 
† See the Soil pH Limitations sections of this label. 
 
Rotation Crop Intervals for Planting Non-Cereal Crops-Non Irrigated Land 
The listed non-cereal crops can be planted after the checked (ضperiod of time (or otherwise designated 
number of months) has elapsed after application of ETI 122 01 H-D.

Note: Do not plant sorghum grown for hybrid seed production. In Idaho, Oregon and Washington, if peas 
and lentils are to be planted in soils treated with ETI 122 01 H-D, a field bioassay is required if the soil pH 
is above 6.5. 
 
 
 
 
 
State, 
County or 
Area 
 
 
Plantback 
Crop(s) 
 
 
 
Soil pH 
 
 
Application 
Rate (oz./A) 
 
Cumulative 
Precipitation 
(Inches) 
Rotation Crop Interval - Months 
 
 
11 
 
 
14 
 
 
24 
 
 
36 
 
 
48 
co 
East of the 
Continental 
Divide
 
Field Corn 
Millets 
7.4 or 
lower 
7.5 to 7.9 
2/10 to 4/10 
2/10 to 4/10 
20 
45 
ض 
ض 
 
Grain 
Sorghum 
7.5 or 
lower 
7.6 to 7.9 
2.10 to 4/10 
2.10 to 4/10 
45 
60 
 ض 
ض 
ID 
Northern 
Counties 
(Benewah, 
Bonner, 
Boundary, 
Clearwater, 
Idaho, 
Kootenai, 
Latah,
 Lewis 
and Nez 
Perce) 
Pea (dry) 6.5 or 
lower 
2/10 to 4/10 35 ض 
Lentils 6.5 or 
lower 
2/10 to 4/10 50 ض 
KS, 
All areas 
Field Corn, 
Millets 
7.4 or lower 
7.5 to 7.9 
2/10 to 4/10 
2/10 to 4/10 
20 
45 
ض 
ض 
 
KS 
Central 
(Generally E. 
of Hwy 183, 
W. of the 
Flinthills) 
Grain 
sorghum, 
Soybeans 
7.9 or lower 2/10 to 5/10 25 ض 
KS 
W. Central and 
Western 
(generally W. 
of Hwy 183 to 
the western 
edge of Grant, 
Kearny, 
Logan, 
Rawlings, 
Stevens, 
Thomas, and 
Wichita 
counties) 
Grain 
sorghum 
7.5 or lower 
7.6 to 7.9 
2/10 to 4/10 
2/10 to 4/10 
21 
 42 
 ض 
26 
mos. 
 
Soybeans 7.5 or lower 
7.6 to 7.9 
 
 
2/10 to 4/10 
2/10 to 4/10 
40 
60 
 
 
 
 
 
 
 
 
 ض 
 
ض

State, 
County or 
Area 
 
 
Plantback 
Crop(s) 
 
 
 
Soil pH 
 
 
Application 
Rate (oz./A) 
 
Cumulative 
Precipitation 
(Inches) 
Rotation Crop Interval - Months 
 
 
11 
 
 
14 
 
 
24 
 
 
36 
 
 
48 
KS 
Far Western 
(In the last tier 
of counties 
along the 
KS/CO border: 
Cheyenne, 
Greeley, 
Hamilton, 
Morton, 
Sherman, 
Stanton, and 
Wallace)
 
Grain 
sorghum, 
Soybeans 
7.5 or lower 
7.6 to 7.9 
2/10 to 4/10 
2/10 to 4/10 
36 
60 
 26 
mos. 
 
 
 
ض 
NE 
All areas 
Field Corn, 
Millet 
7.4 or lower 
7.5 to 7.9 
2/10 to 4/10 
2/10 to 4/10 
20 
45 
ض 
 
ض 
 
NE 
S. Central 
(Franklin, 
Nuckolls, 
Thayer and 
Western 
counties) 
Grain 
sorghum, 
Soybeans 
7.9 or lower 2/10 to 5/10 25 ض 
NE 
Western 
counties 
(Chase, 
Dundy, 
Frontier, 
Furnas, 
Gosper, 
Harlan, Hayes, 
Hitchcock, 
Perkins, 
Phelps, and
 
Red Willow) 
Grain 
sorghum, 
Soybeans 
7.5 or lower 
7.6 to 7.9 
2/10 to 4/10 
2/10 to 4/10 
40 
60 
 ض 
 
ض 
 
NE 
Panhandle 
(Deuel, 
Garden, and 
Sheridan 
counties and 
all counties W. 
to the WY 
border) 
Grain 
sorghum 
7.5 or lower 2/10 to 4/10 45 ض 
OK 
All areas 
Field Corn, 
Millets 
7.4 or lower 
7.5 to 7.9 
2/10 to 4/10 
2/10 to 4/10 
20 
45 
ض 
 
 
ض 
 
OK 
East of 
Panhandle 
Grain 
sorghum, 
Cotton,
 
Mung beans, 
Soybeans 
7.9 or lower 2/10 to 5/10 25 ض 
OK 
Panhandle 
Grain 
sorghum 
7.9 or lower 2/10 to 4/10 30 
 
 
 
25 
mos.

State, County 
or Area 
 
 
Plantback 
Crop(s) 
 
 
 
Soil pH 
 
 
Rotation Crop Interval - Months 
 
11 
 
 
14 
 
 
24 
 
 
36 
 
 
48 
Application 
Rate (oz./A) 
Cumulative 
Precipitation 
(Inches) 
OR 
Northeastern 
counties 
(Baker, 
Umatilla, 
Union and
 
Wallowa) 
Pea (dry) 6.5 or lower 2/10 to 4/10 35 ض 
Lentils 6.5 or lower 2/10 to 4/10 50 ض 
OR 
West of the 
Cascades 
Ryegrass 
(annual and 
perennial) 
Crimson 
Clover 
6.5 or lower 2/10 to 4/10 20 9 mo. 
Red Clover 
Snap Beans 
6.5 or lower 2/10 to 4/10 40 15 mos. 
 
Field Corn 6.5 or lower 2/10 to 4/10 60 22 mo. 
TX Field Corn, 7.4 or lower 2/10 to 4/10 20 ض 
 
ض 
 
All areas Millets 7.5 to 7.9 2/10 to 4/10 45 
TX 
Eastern 
Grain 
Sorghum, 
7.9 or 
lower 
2/10 to 5/10 25 ض 
counties Cotton, 
(Archer, Bell, Mung 
Bosque, Beans, 
Bowie, Camp, Soybeans 
Cass, Clay, 
Colin, Cooke, 
Coryell, Dallas, Delta, Denton, Ellis, Falls, Fannin, Franklin, Grayson, 
Hill, Hood, Hopkins, Hunt, Jack, Johnson, Kaufman, Lamar, Limestone, 
McLennan, Milam, Montague, Morris, Navarro, Palo Pinto, Parker, Rains, 
Red River, Robertson, Rockwall, Somervell, Tarrent, Titus, Upshur, Van 
Zandt, Wichita, Williamson, Wise, Wood, Young 
 .. 
TX 
Central 
counties 
(Baylor, 
Cotton, 
Grain 
sorghum
 
7.9 or lower 
7.9 or lower 
2/10 to 4/10 
5/10 
25 
46 
 
 
 
 
 
 
 
 
 
.' 
ض 
26 
mos. 
 
Callahan, 
Eastland, 
Foard, 
Hardeman, 
Haskell, Knox, 
Shackelford, 
Stephens, 
Throckmorton 
and Wilbarger) 
TX 
Panhandle 
Grain 
sorghum 
7.9 or lower 2/10 to 4/10 30 25 
mos. 
 
Lentils 6.5 or lower 2/10 to 4/10 50 ض 
WA Pea (dry) 6/5 or 2/10 to 4/10 35 ض 
Eastern lower 
counties 
(Asotin, 
Columbia, 
Garfield, Pend

State, 
County or 
Area 
 
 
Plantback 
Crop(s) 
 
 
 
Soil pH 
 
 
Application 
Rate (oz./A) 
 
Cumulative 
Precipitation 
(Inches) 
Rotation Crop Interval - Months 
 
 
11 
 
14 
 
24 
 
 
36 
 
 
48 
Oreille, 
Spokane, 
Stevens, Walla 
Walla and 
Whitman) 
Lentils 6/5 or 
lower 
2/10 to 4/10 50 ض 
WY 
Southeastern 
counties of 
Field Corn, 
Millets 
7.4 or lower 
7.5 to 7.9 
2/10 to 4/10 
2/10 to 4/10 
20 
45 
ض 
ض 
 
Goshen, 
 
 ض 
 
ض 
Laramie and 
Platte 
Counties 
Grain 
sorghum 
7.5 or lower 
7.6 to 7.9 
2/10 to 4/10 
2/10 to 4/10 
45 
60 
 
Rotation Crop Intervals for Non-Cerea l Crops-Irrigated/Non Irrigated Land 
Following Wheat, Barley or Fallow from Application of ETI 122 01 H-D at the 
Maximum Use Rate 
The listed non-cereal crops can be planted after the checked (ضperiod of time has elapsed after 
application of ETI 122 01 H-D. These intervals are based on normal amounts of precipitation or 
irrigation. NOTE: If drought conditions exist, cold weather persis ts, or soil pH varies within fields, some 
temporary crop discoloration and/or crop injury may o ccur to STS soybeans planted in fields previously 
treated with ETI 122 01 H-D. 
 
 
 
Location 
 
Crop† 
 
 
Soil pH 
Max. Use Rate 
(oz./Acre) 
Minimum Recropping Interval 
 
6 Months 
 
18 Months 
All Areas STS Soybeans** 7.9 or lower 0.5 ض 
Alabama 
Arkansas 
Delaware 
Georgia 
Illinois 
Indiana 
Kentucky 
Louisiana 
 
 ض Maryland Grain Sorghum, 7.9 or lower 0.5 
Mississippi Cotton, 
Missouri Non-STS 
North Carolina Soybeans, Field 
New Jersey Corn, 
Pennsylvania Rice 
South Carolina 
Tennessee 
Virginia 
 † These rotation crops do not include crops grown for seed. 
 
Rotation Crop Intervals for Planting Grasse s on Conservation Reserve Program (CRP) 
Acres 
The grasses listed below may be planted into wheat, barle y, oats or fallow areas previously treated with 
ETI 122 01 H-D after the appropriate interval has elapsed (refer to table below for the designated interval 
noted by the ضsymbol). Injury to legumes may occur and Etigra does not recommend planting of grass 
and legume mixtures.

STORAGE AND DISPOSAL
Do not contaminate water, food, or feed by storage and disposal.
PESTICIDE STORAGE: Store product in original container only. Do not contaminate water, other 
pesticides, fertilizer, food or feed in storage. Store in a cool, dry place.
PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be disposed of on site or at 
an approved wasted disposal facility.
CONTAINER DISPOSAL: Nonrefillable container. Do not reuse or refill this container. Offer for 
recycling, if available. Triple rinse as follows: Empty the remaining contents into application equipment 
or a mix tank. Fill the container ¼ full with water and recap. Shake for 10 seconds. Pour rinsate into 
application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after 
the flow begins to drip. Repeat this procedure two more times.
Bentgrasses Lovegrasses - Sand, Weeping
Blue grama Orchardgrass (excluding Piaute)
Bluestems - Big, Little, Plains, Sand, WW Spar Prairie sandreed
Buffalograss Sand dropseed
Galleta Sheep fescue
Green needlegrass Sideoats grama
Green sprangletop Switchgrass
lndiangrass Wheatgrasses - Crested, Intermediate,
Pubescent, Slender, Streambank, Tall, 
Thickspike, Western
Indian ricegrass Wild-ryegrasses - Beardless, Russian
Location Soil pH†
Use Rate 
(oz/acre)
Minimum 
Recropping 
Interval -
2M o n t h s
Minimum 
Recropping 
Interval -
4M o n t h s
MT, ND, SD,
Northern WY
7.5 or lower 2/10 -3/10ض
SD, and 7.6 to 7.9 2/10-3/10ض(wheatgrasses 
only)
CO, NM, Southern 
WY
7.9 or lower 2/10 - 3/10ض
NE, KS, OK, TX 7.9 or lower 2/10 - 4/10ض
7.9 or lower 5/10ض
ID, OR, UT, WA 7.9 or lower 2/10-4/10ض
CONDITION OF SALE AND LIMITATION OF WARRANTY AND LIABILITY
NOTICE: Read the entire Directions for Use and Conditio ns of Sale and Limitation of Warranty and 
Liability before buying or using this product. If the terms are not acceptable, return the product at once, 
unopened, and the purchase price will be refunded.
The Directions for Use of this product must be follow ed carefully. It is. impossible to eliminate all risks 
inherently associated with the use of this produc t. Ineffectiveness or other unintended consequences 
may result because of such factors as manner of use or application, weather, presence of other materials 
or other influencing factors in the use of the product, which are beyond the control of Etigra or Seller. All

such risks shall be assumed by Buyer and User, and Buyer and User agree to hold Etigra and Seller 
harmless for any claims relating to such factors. 
Etigra warrants that this product conforms to the chemical description on the label and is reasonably fit for 
the purposes stated in the Directions for Use, subject to the inherent risks referred to above, when used 
in accordance with the Directions for Use. This wa rranty does not extend to the use of this product 
contrary to label instructions, or under conditions not reasonably foreseeable to or beyond the control of 
Seller or Etigra, and Buyer and User assume the risk of any such use. TO THE EXTENT CONSISTENT 
WITH APPLICABLE LAW, ETIGRA MAKES NO WARRANTIES OF MERCHANTABILITY OR OF 
FITNESS FOR A PARTICULAR PURPOSE NOR ANY OTHER EXPRESS OR IMPLIED WARRANTY 
EXCEPT AS STATED ABOVE. 
To the extent consistent with applicable law, neither Etigra nor Seller shall be liable for any incidental, 
consequential or special damages resulting from the use or handling of this product. TO THE EXTENT 
CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER OR BUYER, 
AND THE EXCLUSIVE LIABILITY OF ETIGRA AND SELLER FOR ANY AND AL L CLAIMS, LOSSES, 
INJURIES OR DAMAGES (INCLUDING CLAIMS BA SED ON BREACH OF WARRANTY, CONTRACT, 
NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) RESULTING FROM THE USE OR 
HANDLING OF THIS PRODUCT, SHALL BE THE RETURN OF THE PURCHASE PRICE OF THE 
PRODUCT OR, AT THE ELECTION OF ETIGRA OR SELLER, THE REPLACEMENT OF THE 
PRODUCT. 
 
(RV[082124]) 
Etigra and Seller offer this product, and Buyer and User accept it, subject to the foregoing Conditions of 
Sale and Limitation of Warranty and Liability, whic h may not be modified except by written agreement 
signed by a duly authorized representative of Etigra. 
ETI 122 01 H-D is not manufactured or distributed by DuPont, seller of Finesse®. 
 
Everest® is a trademark of Arysta LifeScience North America Corporation. 
Banvel® and Clarity® are trademarks of BASF Corporation. 
Bronate®, Buctrii®, Di-Syston®, Hoelon® and Sencor® are trademarks of Bayer. 
Curtail® and Starane® are trademarks of Dow AgroSciences, L C . 
Ally®, Direx®, Express®, Finesse®, Glean®, Harmony®, Karmex and Manzate® are trademarks of E.I. 
DuPont de Nemours & Company. 
Etigra™ is a trademark of Etigra. 
Salvo® and Sword® are trademarks of Loveland Products, Inc. 
Maverick® is a trademark of the Monsanto Company. 
Assert® is a trademark of Nufarm, Inc. 
Amber® is a trademark of Syngenta Crop Protection, Inc. 
 
 
 
EPA [approval date]