crop-chem-docs/corpus/epa_ppls/264-1219.md

# Tetraniliprole ST 380FS

- EPA Reg No: **264-1219**
- Registrant: BAYER CROPSCIENCE, LLC
- Signal word: Caution
- Active ingredients: Tetraniliprole (32.8%)
- Label accepted: 2023-03-01
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000264-01219-20230301.pdf

---
Registration Notice Unconditional v.20220527 
 
 
 
U.S. ENVIRONMENTAL PROTECTION AGENCY 
Office of Pesticide Programs 
Registration Division (7505T) 
1200 Pennsylvania Ave., N.W. 
Washington, D.C. 20460 
 
EPA Reg. Number: 
 
264-1219 
 
Date of Issuance: 
 
3/1/23 
NOTICE OF PESTICIDE: 
 X Registration 
 Reregistration 
 
Term of Issuance: 
Unconditional 
 (under FIFRA, as amended) 
Name of Pesticide Product: 
Tetraniliprole ST 380 FS 
 
Name and Address of Registrant (include ZIP Code): 
Christie Villegas 
Senior Regulatory Affairs Manager 
Bayer U.S. – Crop Science, Research & Development 
700 Chesterfield Pkwy W 
Chesterfield, MO 63017 
 
 
Note: Changes in labeling differing in substance from that accepted in connection with this registration must be submitted to and ac cepted by the 
Registration Division prior to use of the label in commerce. In any correspondence on this product always refer to the above EPA registration number. 
 
On the basis of information furnished by the registrant, the above named pesticide is hereby registered 
under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA). 
 
Registration is in no way to be construed as an endorsement or recommendation of this product by the 
Agency. In order to protect health and the environment, the Administrator, on his motion, may at any 
time suspend or cancel the registration of a pesticide in accordance with the Act. The acceptance of any 
name in connection with the registration of a product under this Act is not to be construed as giving the 
registrant a right to exclusive use of the name or to its use if it has been covered by others. 
 
This product is unconditionally registered in accordance with FIFRA section 3(c)(5) provided that you: 
 
1. Submit and/or cite all data required for registration/reregistration/registration review of your 
product when the Agency requires all registrants of similar products to submit such data. 
 
Continues page 2 
 
Signature of Approving Official: 
 
 
Deanna (Dee) Colby, Chief 
Invertebrate and Vertebrate Branch 3 
Re
gistration Division 
 
Date: 
 
 
 3/1/23 
DEAN
NA 
COLBY
Digitally signed 
by DEANNA 
COLBY 
Date: 
2023.03.01 
10:39:59 -05'00'

Page 2 of 2 
EPA Reg. No. 264-1219 
Decision No. 576269 
 
EPA Form 8570-6 
2. Make the following label changes before you release the product for shipment: 
 
x Revise the EPA Registration Number to read, “EPA Reg. No. 264-1219.” 
 
3. Submit one copy of the final printed label for the record before you release the product for 
shipment. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please be aware 
that the website becomes labeling under FIFRA and is subject to review by the Agency. If the website is 
false or misleading, the product would be misbranded and unlawful to sell or distribute under FIFRA 
section 12(a)(1)(E). 40 CFR 156.10(a)(5) lists examples of statements EPA may consider false or 
misleading. In addition, regardless of whether a website is referenced on your product’s label, claims 
made on the website may not substantially differ from those claims approved through the registration 
process. Therefore, should the Agency find or if it is brought to our attention that a website contains 
false or misleading statements or claims substantially differing from the EPA approved registration, the 
website will be referred to the EPA’s Office of Enforcement and Compliance. 
 
If these conditions are not complied with, the registration will be subject to cancellation in accordance 
with FIFRA section 6. Your release for shipment of the product constitutes acceptance of these 
conditions. A stamped copy of the label is enclosed for your records. 
 
The record for this product currently contains the following CSF(s): 
 
x Basic CSF dated 04/19/2021 
x Alternate CSF 1 dated 04/19/2021 
 
If you have any questions, please contact Ralph Narain at 202-566-2853 or at Narain.Ralph@epa.gov. 
 
 
Enclosure: Stamped label

1 
Tetraniliprole ST 380 FS 
ABN: Reatis™ ST 380 FS
A systemic seed treatment insecticide for use on cereals for the control of listed insect pests.
All seed treated with this product must be conspicuously colored at the time of treatment.
ACTIVE INGREDIENT(S):
TETRANILIPROLE: 1-(3-chloropyridin-2-yl)-N-[4-cyano-2-methyl-6-(methylcarbamoyl)phenyl]-3-{[5-(trifluoromethyl)-2H-tetrazol-2-
yl]methyl}-1H-pyrazole-5-carboxamid: ............................................................................................................................... ............... 32.80% 
OTHER INGREDIENTS: .................................................................................................................................................................. 67.20% 
TOTAL: 100.00% 
Contains 3.17 pounds tetraniliprole per U.S. gallon (380 grams AI/liter) 
Tetraniliprole ST 380 FS is a flowable suspension for seed treatment use. 
 
*CAS No. 1229654-66-3
EPA Reg. No. 264-RERO EPA Est. ________________
KEEP OUT OF REACH OF CHILDREN
CAUTION
For MEDICAL and TRANSPORTATION Emergencies ONLY Call 24 Hours a Day 1-800-334-7577
For PRODUCT USE Information Call 1-866-99BAYER (1-866-992-2937)
Please refer to [back panel] [booklet] for additional precautionary statements and directions for use. [Note to 
reviewer: Location of additional precautionary statements and directions for use will vary between those listed, 
depending on container type/size.]
Net Contents:
[Batch Code:] 
PRODUCED FOR
Bayer CropScience LP
800 N. Lindbergh Blvd.
St. Louis, MO 63167
1-866-99BAYER (1-866-992-2937)
TETRANILIPROLE GROUP 28 INSECTICIDE
03/01/2023
264-1219

2 
 
FIRST AID 
If swallowed: x Call a poison control center or doctor immediately for treatment advice. 
x Have person sip a glass of water if able to swallow. 
x Do not induce vomiting unless told to do so by a poison control center or doctor. 
x Do not give anything by mouth to an unconscious person. 
If on skin or 
clothing: 
x Take off contaminated clothing. 
x Rinse skin immediately with plenty of water for 15-20 minutes. 
x Call a poison control center or doctor for treatment advice. 
If inhaled: x Move person to fresh air. 
x If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably by mouth-to-
mouth, if possible. 
x Call a poison control center or doctor for treatment advice. 
If in eyes: x Hold eye open and rinse slowly and gently with water for 15-20 minutes. 
x Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. 
x Call a poison control center or doctor for treatment advice. 
In case of emergency, call the toll-free Bayer CropScience Emergency Response telephone number: 1-800-334-7577. 
Have a product container or label with you when calling a poison control center or doctor, or going for treatment. 
Note to Physician: Treat Symptomatically. 
 
PRECAUTIONARY STATEMENTS 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
CAUTION 
 
PERSONAL PROTECTIVE EQUIPMENT (PPE) 
Workers involved with treating the seed (e.g. connecting and disconnecting hoses and transfer pumps, mixing, equipment calibration, 
etc), baggers, bag sewers, others exposed to the concentrate, and cleaners/repairers of seed treatment equipment must wear: 
x Long sleeved shirt and long pants; 
x Chemical resistant gloves made of any waterproof material; 
x Shoes and socks. 
 
USER SAFETY REQUIREMENTS 
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot 
water. Keep and wash PPE separately from other laundry. 
 
 
USER SAFETY RECOMMENDATIONS 
x Users should remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. 
x Users should remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as 
possible, wash thoroughly and change into clean clothing. 
x Users should wash hands after using and before eating, drinking, chewing gum, using tobacco or using the toilet. 
 
 
ENVIRONMENTAL HAZARDS 
This product is toxic to birds and aquatic invertebrates. Do not apply directly to water, to areas where surface water is present or to the 
intertidal areas below the mean high-water mark. Do not contaminate water when disposing of equipment washwater or rinsates. 
Treated seed exposed on soil surface may be hazardous to birds. Cover or collect treated seed spilled during loading and planting. 
 
Ground Water Advisory 
This chemical has properties and characteristics associated with chemicals detected in ground water. This chemical may leach into 
groundwater if used in areas where soils are permeable, particularly where the water table is shallow. 
 
Pollinator Protection
 
This product is highly toxic to bees and other pollinating insects exposed directly or to residues in/on blooming crops or weeds. Ensure 
that planting equipment is functioning properly in accordance with manufacturing recommendations and follow best management 
practices to minimize seed coat abrasion during planting to reduce treated seed dust which can drift to blooming crops or weeds.

3 
 
DIRECTIONS FOR USE 
 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
Read the entire label before using this product. 
 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This Standard contains 
requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural 
pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific 
instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and restricted-entry 
interval and notification to workers (as applicable). The requirements in this box only apply to uses of this product that are covered by 
the Worker Protection Standard. 
 
Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 12 hours. 
Exception: Once the seeds are planted in soil or other planting media, the Worker Protection Standard allows workers to enter the 
treated area without restriction if there will be no worker contact with the treated seeds in the soil or with the planting media. 
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with 
anything that has been treated, such as plants, soil, or water is: 
 
• Coveralls 
• Chemical-resistant gloves made of any waterproof material. 
• Shoes plus socks 
 
 
PRODUCT INFORMATION 
TETRANILIPROLE ST 380 FS is a flowable suspension, systemic seed treatment product, labeled for the control of listed insect pests 
on treated seed of Cereal Grains (Crop Group 15) Excluding Rice and Wild Rice and Forage, Fodder and Straw of Cereal Grains (Crop 
Group 16) Excluding Rice and Wild Rice. TETRANILIPROLE ST 380 FS is for use in commercial seed treatment operations (facilities 
and mobile treaters) and for on-farm treatment with conventional seed treating equipment which can accurately meter, mix and apply 
flowable seed treatment formulations. Not for use on agricultural establishments in hopper-box, planter-box, slurry-box, or other seed-
treatment applications at or immediately before planting. 
 
USE RESTRICTIONS 
 
x All seed treated with this product must be conspicuously colored at the time of treatment. Any additional colorant added to 
treated seed must be cleared for use under 40 CFR part 153.155. 
x Not for use on agricultural establishments in hopper-box, plante r-tox, slurry-box, or other seed treatment applications at or 
immediately before planting. Regardless of method of application, (seed treatment, soil, or foliar) DO NOT apply more than 
0.178 lbs of active ingredient tetraniliprole per acre per calendar year. 
x DO NOT cultivate within 25 feet of the aquatic areas to allow growth of a vegetative filter strip. Employ the best management 
practices for minimizing runoff. 
x Store treated seeds away from feed and foodstuffs. 
x DO NOT allow children, pets, or livestock to have access to treated seed. 
x DO NOT use treated seed for feed, food or oil purposes. 
x Dispose of surplus treated seed in accordance to state or local regulations. 
x Plant treated seed at a minimum soil depth of 1 inch. 
x Excess treated seed may be used for ethanol production only if (1) by-products are not used for livestock feed and (2) no 
measurable residues of pesticide remain in ethanol by-products that are used in agronomic practice. 
x Treated seeds exposed on soil surface may be hazardous to wildlife. Cover or collect treated seeds spilled during loading. 
x Leftover treated seed may be double sown around the headland or buried away from water sources in accordance with local 
requirements. 
x DO NOT contaminate water bodies when disposing of planting equipment wash waters. 
x Dispose of seed packaging or containers in accordance with local requirements. Do not use empty seed bags for any other 
purpose. 
x DO NOT mix this product with other pesticides unless sufficient compatibility, loading rates, and seed and crop safety factors 
are determined. 
x Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 12 hours. Exception: Once the 
seeds are planted in soil or other planting media, the Worker Protection Standard allows workers to enter the treated area 
without restriction if there will be no worker contact with the treated seeds in the soil or with the planting media. 
 
[Refer to the use directions and additional restrictions in the Crop Use Directions section below.]

4 
 
 
 
RESISTANCE MANAGEMENT RECOMMENDATION 
 
For resistance management, please note that Tetraniliprole ST 380 FS contains a Group 28 insecticide. Any insect population may 
contain individuals naturally resistant to Tetraniliprole ST 380 FS and other Group 28 insecticides. A gradual or total loss of pest control 
may occur over time if these insecticides are used repeatedly in the same fields. Appropriate resistance-management strategies should 
be followed. 
 
To delay fungicide and insecticide resistance, take one or more of the following steps: 
x Rotate the use of Tetraniliprole ST 380 FS or other Group 28 insecticides within a growing season sequence with different 
groups that control the same pests. 
x Use tank mixtures with insecticides from a different group th at are equally effective on the target pest when such use is 
permitted. Use at least the minimum application rate as labeled by the manufacturer. DO NOT rely on the same mixture 
repeatedly for the same pest population. Consider any known cross-resistance issues (for the targeted pests) between the 
individual components of the mixture. In addition, consider the following recommendations provided by the Insecticide 
Resistance Action Committee (IRAC): 
o Individual insecticides selected for use in mixtures should be highly effective and be applied at the rates at which they 
are individually registered for use against the target species. 
o Mixtures with components having the same IRAC mode of action classification are not recommended for insect 
resistance management. 
o When using mixtures, consider any known cross-resistance issues between the individual components for the targeted 
pest(s). 
o Mixtures become less effective if resistance is already developing to one or both active ingredients, but they may still 
provide pest management benefits. 
o The insect resistance management benefits of an insecticid e mixture are greatest if the two components have similar 
periods of residual insecticidal activity. Mixtures of insecticides with unequal periods of residual insecticide activity may 
offer an insect resistance management benefit only for the period where both insecticides are active. 
x Adopt an integrated disease management program for insecticide use that includes scouting, uses historical information related 
to pesticide use, and crop rotation, and which considers host plant or pest resistance as well as cultural, biological and other 
chemical control practices. 
x Monitor after application for unexpected target pest survival. If the level of survival suggests the presence of resistance, c onsult 
with your local university specialist or certified pest control advisor. 
x Contact your local extension specialist or certified crop advisor for any additional pesticide resistance-management and/or IP M 
recommendations for specific crops and pests. 
x For further information or to report suspected resistance contact Bayer CropScience as 1-866-99BAYER (1-866-992-2937). 
 
 
APPLICATION INSTRUCTIONS 
x TETRANILIPROLE ST 380 FS is for use in commercial seed tr eatment operations (facilities and mobile treaters) and for on-farm 
treatment with conventional seed treating equipment which can accurately meter, mix and apply flowable seed treatment 
formulations. Not for use on agricultural establishments in hopper-box, planter-box, slurry-box, or other seed-treatment 
applications at or immediately before planting. Mix thoroughly before use or use entire container at one time. Pre-test all tank 
mixes to determine physical compatibility between formulations. Tetraniliprole ST 380 FS should be combined with a Bayer 
CropScience fungicide product for seed and seedling protection against fungal pathogens, as well as insect pests. It is the 
pesticide user’s responsibility to ensure that all products in the mixtures are registered for the intended use. Users must follow the 
most restrictive directions and precautionary language of the products in the mixture. 
o All seed treated with this product must be conspicuously colored at the time of treatment. Any additional colorant 
added to treated seed must be cleared for use under 40 CFR part 153.155 
o Allow seed to dry before bagging 
o Store away from feed and foodstuffs 
x Treatment of highly mechanically damaged seed, or seed of know n low vigor or poor quality, may result in reduced germination 
and/or reduction of seed and seedling vigor. Treat and conduct germination tests on a small portion of seed before committing the 
total seed lot to a selected chemical treatment. Due to seed quality conditions beyond the control of Bayer CropScience, no 
claims are made to guarantee germination of carry-over seed.

5 
 
 
ROTATIONAL CROPS 
Treated areas may be replanted immediately with any crop specified on this label or crops that have a tolerance. This includes tuberous 
and corm vegetables (Crop group 1C), leafy vegetables (Crop group 4-16), brassica stem vegetables (Crop group 5-16), fruiting 
vegetables (Crop group 8-10), corn (field, pop and sweet), soybeans, cotton (Crop group 20C), and tobacco. 
 
These crops may be planted 30 days after the last application: Root and tuber vegetables (Crop groups 1A and 2), bulb vegetables 
(Crop group 3-07), legume vegetables (Crop groups 6 and 7, except soybeans), cucurbit vegetables (Crop group 9), oilseeds, except 
cotton (Crop groups 20a and 20B), and alfalfa. 
 
All other crops may be planted 120 days after the last application. 
 
 
SPECIFIC CROP DIRECTIONS 
 
 
 
 
 
CEREAL GRAINS (CROP GROUP 15) EXCLUDES RICE, WILD RICE, AND 
FORAGE, FODDER AND STRAW OF CEREAL GRAINS (CROP GROUP 16) EXCLUDES RICE, WILD RICE 
Barley, Buckwheat, Corn, Millet (pearl), Millet (proso), Oats, Popcorn, Rye, Sorghum, Teosinte, Triticale, Wheat 
Pest(s) Controlled 
Application Rate(s) Per 100 lbs Seed 
(lbs ai/100 lbs seed) 
 
Wireworm 0.4 – 2 fl oz/cwt 
(0.01 – 0.05) 
Application Directions: 
x Apply using commercial slurry or mist-type seed treatment eq uipment. Uniform application of seed is necessary to ensure 
seed safety and best disease protection. Dilute product with sufficient water to ensure complete seed coverage. 
x Use lower end of recommended rate (0.4-1 fl oz/cwt) in scenarios of expected low pest pressures and where an additional 
treatment for wireworms will be added. 
x Use the higher end of recommended rate (1- 2 fl oz/cwt) in scenarios of expected heavy insect pressure. 
x Use high quality, properly cleaned seed. 
x All seed must be adequately dyed with a suitable colorant to prevent its accidental use as food for man or feed for animals. 
Refer to 21CFR, part 2.25. Any additional colorant added to treated seed must be cleared for use under 40CFR, part 153.155.

6 
 
SEED TAG LABELING 
The Federal Seed Act requires that the container of seed treated with TETRANILIPROLE ST 380 FS must be labeled with the following 
statements: 
x This seed has been treated with: 
o TETRANILIPROLE ST 380 FS (EPA Reg. No. 264-RERO), which contains TETRANILIPROLE. 
x Do not use treated seed for food, feed, or oil production. 
x User is responsible for ensuring that the seed bag meets all requirements under the Federal Seed Act. 
In addition, the US Environmental Protection Agency requires the following statements on the container of seed treated with 
TETRANILIPROLE ST 380 FS (EPA Reg. No. 264-RERO)(Tetraniliprole): 
x Store treated seeds away from feed and foodstuffs. 
x DO NOT allow children, pets, or livestock to have access to treated seed. 
x Wear long-sleeved shirt, long pants and chemical resistant gloves made of any waterproof material when handling 
treated seed. 
x Pollinator Protection: This product is highly toxic to bees and other pollinating insects exposed directly or to residues in/on 
blooming crops or weeds. Ensure that planting equipment is functioning properly in accordance with manufacturing 
recommendations and follow best management practices to minimize seed coat abrasion during planting to reduce treated seed 
dust which can drift to blooming crops or weeds. 
x Ground Water Advisory: This chemical has properties and characteristics associated with chemicals detected in ground 
water. This chemical may leach into ground water if used in areas where soils are permeable, particularly where the water table 
is shallow. 
x Excess treated seed may be used for ethanol production only if (1) by-products are not used for livestock feed and (2) no 
measurable residues of pesticide remain in ethanol by-products that are used in agronomic practice. 
x Treated seeds exposed on soil surface may be hazardous to wildlife. Cover or collect treated seeds spilled during loading. 
x All seed treated must be conspicuously colored at the time of treatment. Any additional colorant added to treated seed must be 
cleared for use under 40 CFR part 153.155. 
x This [grain type] seed has been treated with 0.0XX lb (0.0XX mg) tetraniliprole per 100 lbs seed. Calculate the actual amount of 
tetraniliprole applied per acre based on seeds planted per acre. 
x Plant treated seed at a minimum soil depth of 1 inch. 
x DO NOT store leftover treated seed where there is a chance of it becoming mixed with untreated seed. 
x Dispose of all excess treated seed. Leftover treated seed may be double sown around the headland or buried away from water 
sources in accordance with local requirements. 
x DO NOT contaminate water bodies when disposing of planting equipment wash waters. 
x Dispose of surplus treated seed in accordance to state or local regulations. 
x Dispose of seed packaging or containers in accordance with local requirements. Do not use empty seed bags for any other 
purpose. 
x DO NOT exceed 0.178 lbs tetraniliprole per acre per calendar year, regardless of method of application, (seed treatment, soil, 
or foliar). 
x DO NOT cultivate within 25 feet of the aquatic areas to allow growth of a vegetative filter strip. Employ the best management 
practices for minimizing runoff. 
x Treated areas may be replanted immediately with any crop specified on this label or crops that have a tolerance. This includes 
tuberous and corm vegetables (Crop group 1C), leafy vegetables (Crop group 4-16), brassica stem vegetables (Crop group 5-
16), fruiting vegetables (Crop group 8-10), corn (field, pop and sweet), soybeans, cotton (Crop group 20C), and tobacco. These 
crops may be planted 30 days after the last application: Root and tuber vegetables (Crop groups 1A and 2), bulb vegetables 
(Crop group 3-07), legume vegetables (Crop groups 6 and 7, except soybeans), cucurbit vegetables (Crop group 9), oilseeds, 
except cotton (Crop groups 20a and 20B), and alfalfa. All other crops may be planted 120 days after the last application.

7 
 
 
STORAGE AND DISPOSAL 
Do not contaminate water, food, or feed by storage or disposal. 
 
Pesticide storage 
Store in original container away from feed and food. Store in cool, dry area. Do not store in direct sunlight. Do not allow prolonged 
storage in temperatures that exceed 105ºF (40ºC) or in temperatures that fall below 14ºF (-10ºC). 
 
Pesticide disposal 
To avoid wastes, use all material in this container by application according to label directions. If wastes cannot be avoided, offer 
remaining product to a waste facility or pesticide disposal program (often such programs are run by state or local governments or by 
industry). 
 
Container handling 
Rigid, Non-refillable containers (equal to or less than 5 gallons) 
Non-refillable container. Do not reuse or refill this container. Triple rinse or pressure rinse container (or equivalent) promptly after 
emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after 
the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or 
a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more 
times. 
 
Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds 
after the flow begins to drip. Hold container upside down over application equipment or mix tank or collect rinsate for later use or 
disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 PSI for at least 30 seconds. Drain for 10 
seconds after the flow begins to drip. 
 
Once container is rinsed, offer for recycling if available or puncture and dispose of in a sanitary landfill. 
 
[OR] 
 
Rigid Non-refillable containers that are too large to shake (i.e., with capacities greater than 5 gallons or 50 lbs) 
Non-refillable container. Do not reuse or refill this container. After emptying product from container, either return container to Bayer 
CropScience per instructions from Bayer CropScience Customer Service Center (1-800-527-4781), or rinse and either recycle or 
dispose of the container as follows: 
 
Bottom Discharge IBC (e.g. – Schuetz Caged IBC or Snyder Square Stackable) 
Pressure rinsing the container before final disposal is the responsibility of the person disposing of the container. To pressure rinse the 
container before final disposal, empty the remaining contents from the IBC into application equipment or mix tank. Raise the bottom of 
the IBC by 1.5 inches on the side which is opposite of the bottom discharge valve to promote more complete product removal. 
Completely remove the top lid of the IBC. Use water pressurized to at least 40 PSI to rinse all interior portions. Continuously pump or 
drain rinsate into application equipment or rinsate collection system while pressure rinsing. Continue pressure rinsing for 2 minutes or 
until rinsate becomes clear. Replace the lid and close bottom valve. 
 
Top Discharge IBC, Drums, Kegs (e.g.– Snyder 120 Next Gen, Bonar B120, Drums, and Kegs) 
Triple rinsing the container before final disposal is the responsibility of the person disposing of the container. To triple rinse the container 
before final disposal, empty the remaining contents from this container into application equipment or mix tank. Fill the container at least 
10 percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Rinse all interior surfaces. Pour or pump 
rinsate into application equipment or rinsate collection system. Repeat this procedure two more times. 
 
Once container is rinsed, offer for recycling if available or puncture and dispose of in a sanitary landfill, or by incineration. 
 
[OR] 
 
 Refillable Plastic Containers 
 
Refillable Plastic containers (equal to or less than 5 gallons) 
Refill this container with pesticide only. Do not reuse this container for any other purpose. After emptying product from container, either 
return container to Bayer CropScience per instructions from Bayer CropScience Customer Service Center (1-800-527-4781) or rinse and 
either recycle or dispose of the container as follows: 
 
Triple Rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows: empty the remaining contents 
into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container ¼ full with water and 
recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain foe 
10 seconds after the flow begins to drip. Repeat this procedure two more times. Pressure rinse as follows: Empty the remaining 
contents into application equipment or mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside

8 
 
down over application equipment or mix rank or collect rinsate for later use or disposal. insert pressure rinsing nozzle in the side of the 
container, and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. 
 
[OR] 
 
Refillable containers (greater than 5 gallons). 
Refill this container with pesticide only. Do not reuse this container for any other purpose. After emptying product from container, either 
return container to Bayer CropScience per instructions from Bayer CropScience Customer Service Center (1-800-527-4781) or rinse and 
either recycle or dispose of the container as follows: 
 
Bottom Discharge IBC (e.g. – Schuetz Caged IBC or Snyder Square Stackable) 
Pressure rinsing the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling 
is the responsibility of the refiller. To pressure rinse the container before final disposal, empty the remaining contents from the IBC into 
application equipment or mix tank. Raise the bottom of the IBC by 1.5 inches on the side which is opposite of the bottom discharge 
valve to promote more complete product removal. Completely remove the top lid of the IBC. Use water pressurized to at least 40 PSI to 
rinse all interior portions. Continuously pump or drain rinsate into application equipment or rinsate collection system while pressure 
rinsing. Continue pressure rinsing for 2 minutes or until rinsate becomes clear. Replace the lid and close bottom valve. 
 
Top Discharge IBC, Drums, Kegs (e.g. – Snyder 120 Next Gen, Bonar B120, Drums, and Kegs) 
Triple rinsing the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is 
the responsibility of the refiller. To triple rinse the containers before final disposal, empty the remaining contents from this container into 
application equipment or mix tank. Fill the container at least 10 percent full with water. Agitate vigorously or recirculate water with the 
pump for 2 minutes. Rinse all interior surfaces. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this 
procedure two more times. 
 
Once container is rinsed, offer for recycling if available or puncture and dispose of in a sanitary landfill or by incineration. 
 
End users are authorized to remove tamper evident cables as required to remove the product from the container unless the container is 
equipped with one-way valves and refilling or returning is planned. If this is the case, end users are not authorized to remove tamper 
evident cables, one-way valves or clean container. 
 
 
CONDITIONS OF SALE AND LIMITATIONS OF WARRANTY AND LIABILITY 
Read the entire Directions for Use, Conditions, Disclaimer of Warranties and Limitations of Liability before using this product. If terms 
are not acceptable, return the unopened product container at once. 
By using this product, user or buyer accepts the following Conditions, Disclaimer of Warranties and Limitations of Liability. 
CONDITIONS: The directions for use of this product are believed to be adequate and must be followed carefully. However, it is 
impossible to eliminate all risks associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences 
may result because of such factors as weather conditions, presence of other materials, or the manner of use or application, all of which 
are beyond the control of Bayer CropScience. To the extent consistent with applicable law, all such risks shall be assumed by the user 
or buyer. 
DISCLAIMER OF WARRANTIES: TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BAYER CROPSCIENCE MAKES 
NO OTHER WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE OR 
OTHERWISE, THAT EXTEND BEYOND THE STATEMENTS MADE ON THIS LABEL. No agent of Bayer CropScience is authorized to 
make any warranties beyond those contained herein or to modify the warranties contained herein. TO THE EXTENT CONSISTENT 
WITH APPLICABLE LAW, BAYER CROPSCIENCE DISCLAIMS ANY LIABILITY WHATSOEVER FOR SPECIAL, INCIDENTAL OR 
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT. 
LIMITATIONS OF LIABILITY: TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER 
OR BUYER FOR ANY AND ALL LOSSES, INJURIES OR DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS 
PRODUCT, WHETHER IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, SHALL NOT 
EXCEED THE PURCHASE PRICE PAID, OR AT BAYER CROPSCIENCE’S ELECTION, THE REPLACEMENT OF PRODUCT. 
TETRANILIPROLE ST 380 FS (PENDING) 05/18/2021, 09/27/2021, 11/28/2022, 01/10/2023, 01/17/2023, 01/27/2023