crop-chem-docs/corpus/epa_ppls/264-586.md

# SEDAGRI BATRIL 20W HERBICIDE

- EPA Reg No: **264-586**
- Registrant: BAYER CROPSCIENCE, LLC
- Signal word: Warning
- Active ingredients: Bromoxynil octanoate (29.2%)
- Label accepted: 1999-10-28
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000264-00586-19991028.pdf

---
yr\ d S 26 fI··- S 1st /o):JS}19 
SEDAGRI BUC;TRIL~20W HERBICIDE 
FOR THE CONTROL OF CERTAIN BROADLEAF WEEDS IN CORN (FIELD AND POP), SORGHUM (GRAIN AND 
FORAGE), SMALL GRAINS, SEEDLING ALFALFA, FLAX, GARLIC, ONIONS, MINT, GRASSES GROWN FOR SOD 
PRODUCTION, NON-RESIDENTIAL TURFGRASS, AND NON-CROPLANDIINDUSTRIAL SITES. 
ACTIVE INGREDIENT: Octanoic acid ester of bromoxynil' (3,5-dibromo-4-Hydroxybenzonitrile) ............................. 29.2% 
INERT INGREDIENTS: ............................................................................. .................................... . .... 70.8% 
Contains petroleum distillate 
'Bromoxynil octanoate equivalent to 20% bromoxynil 
E.P.A. Reg. No. 264-586 E.P .A. Est. No. 264-MO-01 
wr~~~UT OF REACH OF CHILDREN 
In Aee~Td~~t.\abelI.-ng Dated ARNING AVISO 
Based n 'I (19 C 
~1~.~.\~.~'·eL-.~L~o~~~::::~I: L!e ""TC'-1..J 
Si usted no entiende la etiqueta. busque a alguien para que se la explique a usted en detalle. 
(If you do not understand the label. find someone to explain it to you in detail.) 
For PRODUCT USE Information Call 1-800-334-9745. 
) For MEDICAL And TRANSPORTATION Emergencies ONLY Call 24 Hours A Day 1-800-334-7577. 
STATEMEt'.IT OF' PRACTICAL TREATMENT 
IF SWALLOWED: Call a physician or Poison Control Center. Do not induce vomiting. Drink promptly a large quantity of milk. egg 
whites. gelatin solution. or if these are not available. drink large quantities of water. If person is unconscious. do not give anything by 
mouth. Avoid alcohol. . " . 
IF ON SKIN: Wash with plenty of soap and water. Get medical attention. 
IF INHALED: Remove victim to fresh air. If not breathing. give artificial respiration. preferably mouth-to-mouth. Get medical attention. 
IF IN EYES: Hold eyelids open and flush with a steady. gentle stream of water for 15 minutes. Get medical attention. 
NOTE TO PHYSICIAN: This product may pose an aspiration pneumonia hazard. Contains petroleum distillate. Probable mucosal 
damage may contraindicate the use of gastric lavage. Consultation on therapy can be obtained at all hours by calling the 
Rhbne-Poulenc emergency number: 1-800-334-7577. 
PRECAUTIONARY STATEMENTS . . 
WARNING 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
'tauses substantial but temporary eye injury. Hi:ml~ful if swailowed or absorbed through skin or inhaled. Do not get in eyes or On 
clothing.' Avoid contact with skin. Avoid breathing dust. VVear long-sleeved shirt and long pants. socks and shoes. goggles or face 
shield and waterproof gloves. 
PERSONAL PROTECTIVE EQUIPMENT (PPE) 
Some materials that are chemical resistant to this ptaducf are .listed below. If you want options, follow the instructions for category G 
on EPA chemical resistance category selection chart." 
Applicators and other handlers must wear long-sleeved shirt and long pants. chemical resistant gloves such as b1rrier .Iaminate or 
viton gloves for cleaning equipment and mixing/loading, a chemical resistant apron when cleaning equipment and rrixing/Joading and 
shoes plus socks. . . .. . . . , ,) 
Discard clothing and other absorbent materials that have been drenched or heavily contaminated with lhis product's .LLr,La~trate. Do 
not reuse them. Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instruction; for,·_v3shable,;.uce detergent 
and hot water. Keep and wash PPE separately from oth8rlaundry. ' , , . 
When handlers use closed systems. enclosed cabs. or aircraft in a manner that meets the requirements lis,)oti'i~ the WOrker Protection 
Standard (WPS) for agricultural pesticides (40 GFR) 70,.240(d)(4-6». the handler PPE requirements lTIay' ~rl reduced o( modified as 
specified in the W'S. . . . , , 
If you will handle a total of 600 pounds or more of thi~ product per day. you must use a mechanical transfer system for 'all' mixing and 
loading operations. '. . . : :", 
To reduce exposure to residues. wash the spray rig. tractor, and all other equipment used to handle or apply this product with water 
daily or before using the equipment for any·other:pu~ose.,· 
1 
17

) J ) 
AERIAL APPLICATION: Aerial application is prohibited within 300 feet of residential areas (e.g., homes, schools, hospitals, shopping 
areas, etc.) 
User Safety Recommendations 
Users should wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. Remove contaminated clothing and 
wash clothing before reuse. 
ENVIRONMENTAL HAZARDS 
This pesticide is toxic to wildlife and fish. Use with care when applying to areas frequented by wildlife or adjacent to any body of water. 
For terrestrial uses, do not apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high 
water mark. Do not apply when weather conditions favor drift from target areas. Do not contaminate water when disposing of 
equipment washwaters. '. 
PHYSICAL AND CHEMICAL HAZARDS 
Do not use or store near heat or open flame. 
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
Read entire label before using this product 
Do not apply this product in a way that will contact workers or olher persons, either directly or Ihrough drift. Only protected handlers 
may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for 
pesticide regulation. 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the \Narker Protection Standard, 40 CFR part 170. This standard 
contains requirements for the protection of agricuttural workers on farms, forests, nurseries, and greenhouses, and handlers of 
agricultural pesticides. It contains reqUirements for traini.ng, decontamination, notification, and emergency assistance. It also contains 
specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and 
restricted-entry intervals. The requirements in Ihis box only apply to uses of Ihis product that are covered by the Worker Protection 
Standard. 
Do not enter or allow worker entry into treated crops during the restricted entry interval (REI). The REI for harvesting sad farm turf is 
12 days. The REI for other turf activities is 24 hours. For all other crops, the REI is 24 hours. For uses on turf grown for transplanting 
(e.g. on sad farms), notify workers of the appl.ication by warning them orally and by posting warning signs at entrances to treated 
areas. 
PPE required for early enlry to treated areas that is permitted under the Worker Protection Standard and that involves contact with 
anything that has been treated, such as plants, soil, or water, is coveralls over long-sleeved shirt and long pants, chemical resistant 
gloves such as barrier laminate or viton gloves, shoes plus socks and protective eyewear. 
NON-AGRICULTURAL USE REQUIREMENTS 
The requirements in this box apply to the use of. this product on sites that are NOT within the scope of the Worker Protection Standard 
. (WPS) for agricultural pesticides (40 CFR Part 170): The WPS applies when this product is used to produce agricultural plants on 
farms, fotests, nurseries or greenhouses.' .. 
Do not enter or allow others to enter the treated :area until sprays have dried. 
STORAGEAND DISPOSAL 
STORAGE 
Do not contaminate water, food, or feed by storage or disposal. Do not store near fertilizers or seeds. Store at temperatures above 3
0 
F. If allowed to freeze, remix before using. 
PESTICIDE DISPOSAL .. 
wastes resulting from the use of this product m~y b~ di~p~;ed of on site or at an approved waste dispd;ai 'acility. . , , 
CONTAINER DISPOSAL 
Completely empty container into application equipment then dispose of empty container in a sanitary la'r,dflll or by, ;nc~l~ration, or if 
allowed by slate and local authorities, by burning .. If burned, stay out of smoke. .. , , :..:..:.. ' , , 
... . " .. ' 
2

., /'.1 / . 
GENERAL INFORMATION 
SEDAGRI BUCTRIL ® 20W Herbicide is formul~ted.as. a wettable powder of octanoic acid ester of bromoxynil containing 20% by 
weight bromoxyniL . 
SEDAGRI BUCTRIL ® 20W Herbicide is a sel~~tiv", pOjtEiplergence herbicide for cOntrol of important broadleaf weeds infesting corn 
(field and pop). sorghum (grain and forage), small grains (wheat, barley, oats, rye,·triticale), alfalfa (seedling), flax, onions, garlic, mini 
(established peppermint and spearmint), grasse," grown for sod production, non-residential turfgrass, and non-cropland and industrial 
sites. Optimum weed control is obtained when SEDAGRI BUCTRIL <II 20W Herbicide is applied to actively growing weed seedlings. 
SEDAGRI BUCTRIL ® 20W Herbicide is primarily a contact herbicide, therefore thorough coverage of the weed seedlings is essential 
for optimum control. 
SEDAGRI BUCTRIL ® 20W Herbicide has little residual activity. Therefore subsequent flushes of weeds will not be controlled by the 
initial treatment Generally crops that form a good canopy will help shade subsequent weed flushes. However, certain crops or short­
straw varieties. for example Yaccora Raja wheat, may not develop the crop canopy fast enough to shade the subsequent flushes of 
weeds. ... .' . 
Occasional transitory leaf burn may occur. The temporary leaf burn is similar to that seen with liquid fertilizer. Because the activity of 
SEDAGRI BUCTRIL ® 20W is not systemic, recovery of the crop is generally rapid with no lasting effect Frequency and amount of leaf 
burn may be greater when crops are stressed by abrasive winds, cool to cold evening temperatures or mechanical injury: such as that 
caused by hail. sleet or insect feeding. To reduce the potential for temporary leaf burn. applications should be made to dry foliage in 
the recommended spray volumes per acre when weather conditions are not extreme. 
MIXING, LOADING AND HANDLING INSTRUCTIONS 
MIXING INSTRUCTIONS 
J;EDAGRI BUCTRIL® 20W Herbicide is packaged in aConv~nient soluble bag containing 5 Ibs of product Always mix amounts 
. sufficient to utilize the soluble packages in whole units. Do not open the soluble bags to measure smaller quantities of product. To 
determine amounts to mix, determine the desired use rate for the crop and weeds to be treated then determine the amounts to be 
added to the spray tank from the following table. 
SEDAGRI BUCTRIL® 20W Herbicide soluble bag mixing chart: 
Acres to Be Treated Number of Packages to add Number of Packages to add Number of packages to add 
for 1.25 Ibs./acre rate for 1.875 Ibs/acre rate. for 2.5 Ibslacre rate. 
4 1 2 
8 2 3 4 
12 3 6 
16 4 .. 6 8 
20 5 10 
24 6 9 12 
28 7 14 
J 32 8. '. .. , 12 16 ,. 
36 , 9 18 
40 .10 ,.' 15 20 
.. 
44 11 22 
48 12 18 24 . ~-
1. Fill the tank Y. to 113 full of water. 
2. Wlile agitating, add the required number ofp'ackagesof SEDAGRI BUCTRIL ® 20W Herbicide. , " 
3. Continue agitation until the soluble packages are dissolved and product is fully dispersed, at least 5'minuttls. 
4. Once the SEDAGRI BUCTRIL ® 20W Herbic!deisf~lIy dispersed, maintain agitation and continue filiin~ ;~rik with ~;at;;.: 
5. As the tank is filling, add the required crop oil concentrate.· 
6. If the mix1ure is not continuously agitated, settling will occur. If settling occurs, thoroughly re-agitate belore using. 
7. Apply the spray mixture within 24 hours of mixing to avoid product degradation. 
3

SPRAY ADJUVANTS 
CROP OIL CONCENTRATE 
" ! /] 
For besl performance, SEDAGRI BUCTRIL® 20WHerbicide musl be applied wilh crop oil concenlrale (COC) al a rale (concenlralion) 
of 1.0% vtv (1gal per 100 ga\. spray solution. The crop' oil concentrate must be high quality, petroleum or vegelable-seed oil-based 
product (methylated seed oil is considereda' vegetable seed-based oil). Petroleum based oils must contain at least 14% 
emulsifiers/surfactants. 
TANK MIXTURES: SEDAGRI BUCTRIL ® 20W Herbicide can be applied in tank mixture with many other herbicides and insecticides 
registered for use on approved crops. To apply SEDAGRI BUCTRll® 20W in mixture wilh another product fill the spray tank 1/210 3/4 
full wilh ciean waler and begin agilation. If tankmixing with wettable powder, soluble powder, flowable or dry flowable products, add 
the olher producl first. After the other herbicide is thoroughly mixed with water add the recommended amount of SEDAGRI BUCTRIL ® 
20Wand add water to the spray lank to the desired level. If tankmixing with other product types, add Ihe SEDAGRJ BUCTRIL ® 20W 
first before adding the other product. Always mix one product in water thoroughly before adding another product or compatibility 
problems may occur. Never mix two products together without first mixing in water. 
Maintain sufficient agitation while mixing and during application to ensure a uniform spray mixture. If spray mixtUre is allowed to 
remain without agitation for short periods of time, be sure to agitate until uniformly mixed before application. 
If tank mixing with producls olher Ihan Ihose listed on Ihis label, a compalibilily lest is recommended to ensure satisfactory spray 
preparation. To test for compalibility, use a small container and mix a small amount (0.510 1 quart) of spray, combining all ingredients 
in the same ratio as the anticipated use. If any indications of physical incompatibility develop, do not use this mixture for spraying. 
Indications of incompatibility usually will appear within 5 to 15 minutes after mixing. To ensure maximum crop safety and weed control, 
follow all caulions and limitalions on this label and the labels of products used in Ihe lank mixlure with SEDAGRI BUCTRIL ® 20W 
Herbicide. 
) SPRA YABLE LIQUID FERTILIZERS AND SPRAY ADDITIVES 
SEDAGRI BUCTRIL ® 20W Herbicide can be applied in combination with sprayable liquid fertilizer, When tankmixing wilh liquid 
fertilizer always add the fertilizer to the spray tank firsl and agilale thoroughly before adding SEDAGRI BUCTRIL ® 20W. Always 
predetermine the compatibility with liquid fertilizer by mixing smail proportional quantities in advance. Agitation must be maintained 
during filling and application opera,tions to ensure that SI:OAGRI BUCTRll ® 20W.is evenly mixed with the fertilizer. Leaf burn may 
occur when SEDAGRI BUCTRll® 20W is applied with liquid fertilizer, but new leaves are not adversely affected. 
CAUTION: Fertilizers and spray additives can increase foliage leaf burn when applied with SEDAGRI BUCTRIL ® 20W. Do not apply 
fertilizers or spray additives with SEDAGRI BUCTRll'll 20W if leaf burn is a major concern due 10 environmental conditions, crop or 
variety sensitivity to SEDAGRI BUCTRIL® 20W> Do not.apply SEDAGRI BUCTRIL® 20W in combination with fertilizers or spray 
additives if restricted under the individual crop use directions. 
APPLICATION PROCEDURES 
SEDAGRI BUCTRIL® 20WHerbicide can be applie~ to.r'!giste.red use areasby ground and aerial equipment. The following provides 
recommended methods of application for each crop .. 
(X) indicates recommended Use 
X 
X 
x 
X 
4

! 17 
GROUND APPLICA TION 
Use a standard herbicide boom sprayer that provides uniform and accurate application. Sprayer should be equipped with screens no 
finer than 50 mesh in the nozzle tips and in-line strainers, 
Select a spray volume and delivery system that will ensure thorough and uniform spray coverage. For optimum spray distribution and 
thorough coverage use of flat fan nozzles (maximum tip size 8008) with a spray pressure of 40-60 psi are recommended. Other nozzle 
types and lower spray pressures that produce coarse spray droplets may not provide adequate coverage of the weeds to ensure 
optimum control. Raindrop® nozzles and flood nozzles are not recommended as weed control with SEDAGRI BUCTRIL ® 20W may be 
reduced. 
In general, a spray volume of 10 to 20 gallons per acre (GPA) is recommended for optimum spray coverage. A minimum of 5 GPA 
wilh a minimum spray pressure of 50 psi and a maximum ground speed of 10 mph may be used with higher speed, low volume ground 
application if ground terrain, crop and weed density allow effective spray distribution. When using higher speed equipment, a 
maximum ground speed of 10 mph is suggested if field conditions cause excessive boom movement during application which results 
in poor spray coverage. Ground applications made when dry, dusty field conditions exist may provide reduced weed control in wheel 
track areas. Applications using less than 10 gallons per acre may result in reduced weed control. 
When weed infestations are heavy, use of higher spray volumes and spray pressure will be helpful in obtaining uniform weed 
coverage. When com or grain sorghum are large enough to interfere with the spray pattern, drop nozzles should be used to obtain 
uniform weed coverage. If you are unsure of the infestation level or size of crop, consult your local extension service. 
Do not apply when winds are gusty or when other conditions favor poor spray coverage andlor off target spray movement. 
AERIAL APPLICATION 
Use orifice discs, cores and nozzle types and arrangements that will provide for optimum spray distribution and maximum coverage. 
In general a minimum spray volume of 5 GPA and a maximum pressure of 40 psi are recommended. 
Do not apply during inversion conditions, when winds are gusty or when other conditions favor poor spray coverage andlor off target 
) spray movement. Off target spray movement can be minimized by increasing the spray volume per acre and not applying when winds 
exceed 10 mph. 
CULTIVATION 
When properly utilized, timely cultivations of row crops may aid overall weed control efforts as well as crop growth. However, 
cultivation BEFORE or DURING SEDAGRI BUCTRIL ® 20W Herbicide applications may place target weeds under stress, resulting in 
erratic weed control. Whenever SEDAGRI BUCTRIL ® 2,OW Herbicide is being utilized in an overall weed control program, plan to 
postpone any anticipated cultivations until· 5-7 days.after application to ensure best performance. 
SPRAY DRIFT 
SENSITIVE AREAS: The pesticide should only be applied when the potential for drift to adjacent sensitive areas (e.g., residential 
areas, bodies of water, known habitats for threatened or endangered species, non-target crops) is minimal (e.g., when wind is blowing 
away from the sensitive areas), ,'. , 
Avoiding spray drift at the application site is the responsibility of the applicator. The interaction of many equipment-and-weather­
related factors determine the potential for spray drift. The applicator and the grower are responsible for considering all these factors 
when making deciSions. 
The following drift management requirements .. must be followed to avoid off-target drift movement from aerial applications to 
agricultural field crops. These requirements do. not apply to forestry applications, public health uses or to applications using dry 
formulation. 
1. The;'pistance of the outer most nozzles on the boom must not exceed ~ the length of the wingspan or rotor. 
2. Nozzles must always point backward parallel with the,air stream and never be pOinted downwards more than 45 degrees. 
Where states have more stringent regulations, they should be ·observed. The applicator should be familiar with and take into account 
the information covered in the Aerial Drift Reduction Advisory Information. 
INFORMATION ON DROPLET SIZE: (This section is advisory in nature and does not supersede the mandatory label requirements) 
The most effective way to reduce drift potential is to apply large droplets. The best drift management strategy is tu apply the largest 
droplets that provide sufficient coverage and control. Applying larger droplets reduces drift potential, but will no! qrevent drift if 
applications are made improperly, or under unfavorable environmental conditions (see \Mnd, Temperature d,lJ ':iomidity, and 
T empera!ure Inversions belOW). 
CONTROLUNG DROPLET SIZE: (This section is advisory in nature and does not supersede the ma'ldato'!', label re~cire~ents) 
• VolUme - Use high flow rate nozzles to apply the highestpractical spray volume. Nozzles with i,ig;)",' ,ated flows' produce larger 
droplets. 
• Pressure - Do not exceed the nozzle manufacturer's recommended pressures. For many nozzle t);pes.' lower pr~ss~re produces 
larger droplets. When higher flow rates are:need~, use higher flow rate nozzles instead of increasing pressure. :, 
• Number of nozzles - Use the minimum number of nozzles that provide unifonm coverage. 
• Nozzle Orientation - Orienting nozzles so that the spray is released parallel to the airstream produces larger 1r0plE!ts than other 
orientations and is the recommended practice. Significant deflection from horizontal will reduce droplet size d,tu Increase drift 
potential. 
5

6 -:; 17 
• Nozzle Type - Use a nozzle type that is designed-for the intended application. IMth most nozzle types, narrower spray angles 
produce larger droplets. Consider using low-drift nozzles. Solid stream nozzles oriented straight back produce the largest 
droplets and the lowest drift. 
ebOM LENGTH: ([his section is advisory in nature and does not supersede the mandatory label requirements) 
For some use patterns, reducing the effective boom length to less than 0/. of the wingspan or rotor length may further reduce drift 
without reducing swath width. 
APPLICATION HEIGHT: ([his section is advisory in nature and does not supersede the mandatory label requirements) 
Applications should not be made at a height greater than 10 feet above the top of the largest plants unless a greater height is required 
for aircraft safety. Making applications at the lowest height that is safe reduces exposure of droplets to evaporation and wind. 
SWATH ADJUSTMENT: ([his section is advisory in nature and does not supersede the mandatory label requirements) 
\M1en applications are made with a crosswind, the swath will be displaced downward. Therefore, on the up and downwind edges of 
the field, the applicator must compensate for this displacement by adjusting the path of the aircraft upwind. Swath adjustment distance 
should increase, with increasing drift potential (higher wind, smaller drops, etc.) 
WIND: ([his section is advisory in nature and does not supersede the mandatory label requirements) 
Drift potential is lowest between wind speeds of 2 - 10 mph. However, many factors, including droplet size and equipment type 
determine drift potential at any given speed. Application should be avoided below 2 mph due to variable wind direction and high 
inversion potential. NOTE: Local terrain can infiuence wind patterns. Every applicator should be familiar with local wind patterns and 
how they affect spray drift. 
TEMPERATURE AND HUMIDITY: ([his section is advisory in nature and does not supersede the mandatory label requirements) 
\M1en making applications in low relative humidity, set up equipment to produce larger droplets to compensate for evaporation. 
Droplet evaporation is most severe when conditions are both hot and dry. 
) TEMPERATURE INVERSIONS: ([his section is adviSOry in nature and does not supersede the mandatory label requirements) 
Applications should not occur during a temperature inversion b~cause drift potential is high. Temperature inversions restrict vertical air 
mixing, which causes small suspended droplets to remain in a concentrated cloud. This cloud can move in unpredictable directions 
due to the light variable winds common during inversions. Temperature inversions are characterized by increasing temperatures with 
altitude and are common on nights with· limited cloud COver'and light to no wind. They begin to form as the sun sets and often continue 
into the morning. Their presence-can be indicated by ground. fog; however, if fog is not present, inversions can also be identified by 
the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a 
concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates 
indicates good vertical air mixing. 
" ,>, • 
6

GENERAL WEED LIST 
Postemergence application of SEDAGRI BUCTRIL GIl 20YV Herbicide will control the following weeds when sprayed in the seedling 
stage. Maximum weed stage of growth is listed under RECOMMENDED USES for each crop. 
MOST SUSCEPTIBLE BROADLEAF WEED SPECIES 
Annual Sowthistle 
Black Nightshade 
Blue Mustard 
Bristly starbur 
Coast Fiddleneck 
Common Cocklebur 
Common Lambsquarters 
Common T arweed 
Cutleaf Nightshade 
Eastern Black Nightshade 
Field Pennycress 
Green Smartweed 
Hairy Nightshade 
Jimsonweed 
Ladysthumb 
Lancelea! sage 
Pennsylvania Smartweed 
Pepperweed spp. 
) Shepherdspurse 
Silverleaf Nightshade 
Tartary Buckwheat 
1Sunflower 
Ifv\ld Buckwheat 
(Sonchus oleraceus) 
(Solanum nigrum) 
(Chorispora teneJla) 
(AcanthospemlUm hispidum) 
(Amsinckia intennedia) 
(Xanthium strumarium) 
(Chenopodium album) 
(Hemizonia congesta) 
(Solanum triflorum) .. 
(Solanum ptycanthum) 
(Thlaspi alVense) 
(Polygonum scabrum) 
(Solanum sarachoides) 
(Datura stramonium) 
(Polygonum persicaria) 
(Salvia reflexa) 
(Polygonum pensylvanicum 
(annual) (Lepidium spp.) 
(Capse"a bursa-pastoris) 
(Solanum elaeagnifolium) 
(Fagopyrum tatoricum) 
(Helianthus annuus) 
(Polygonum convolvulus) 
'For control of sunflower. delay application until first emerging 
sunflower seedlings are 4 inches in height. 
SUSCEPTIBLE BROADLEAF WEED SPECIES 
Buffalobur (SOlanum rostratum) 
Burcucumber (Sicyos angulatus) 
Common Groundsel (Senecio vulgaris) 
Common ragweed (Ambrosia ariemisiifolia) 
Corn Chamomile (Anthemis alVensis) 
Corn Gromwell (Lithospennum alVense) 
Cow Cockle (Saponaria vacca ria) 
Giant Ragweed (Ambrosia trifida) 
Hemp Sesbania (Sesbania exaftata) 
Ivylea! morningglory (Ipomoea hederacea) 
Knawel (Scleranthus ann us) 
2Kochia (Kochia scoparia) 
London Rocket (Sisymbrium irio) 
Mayweed (Anthemis cotula) 
Pitted morningglory (Ipomoea lacunosa) 
Prostrate Knotweed (Polygonum aviculare) 
Puncture Vine (Tribulus terrestris) 
2Redroot Pigweed (Amaranthus retroflex us) 
Russian Thistle (Salsola ka/i) 
2Spiny Pigweed (Amaranthus spinosus) 
Tall Morningglory (Ipomoea purpurea) 
ZTall Waterhemp (Amaranthus tuberculatus) 
Tumble mustard (Sisymbrium aftissimum) 
Velvetlea! (Abuti/on theophrasti) 
Venice Mallow (Hibiscus trionum) 
Ifv\ld Mustard (Sinapis alVensis) 
Ifv\ld Radish (Raphanus raphanistrum) 
Yellow Starthistle (Centaurea solstitialis) 
2 For effective control, these weeds should not exceed the 4 leaf 
stage or 2 inches in height. whichever comes first. 
) 
WEED SUPPRESSION 
SEDAGRI BUCTRIL ® 20W Herbicide suppresses the growth o! Canada thistle (Girsium alVense) by burning down top growth. 
Regrowth may occur. 
CALIFORNIA REGISTRATIONS 
This product is not registered for use in California. 
7 
/ )

SPECIFIC CROPRECOMMENDA TIONS 
CEREAL GRAIN CROPS . 
Corn (Field and Pop), Sorghum (Grain and Forage), and Sudangrass 
Small Grains ('M1eat, Barley, Oats, Rye and Triticale) 
FORAGE, FIBER AND SPECIALITY CROPS . 
Alfalfa (Seedling) 
Flax 
Garlic 
Mint (Established Peppermint and Spearmint) 
Onions 
GRASS CROPS 
Grass Grown '(oi Sod Production 
Non-Residential Turfgrass 
NON-CROPLAND 
Non-cropland and Industrial Sites 
CEREAL GRAIN CROPS 
/) '1 /7 
) CORN (FIELD AND POP). SORGHUM (GRAIN AND FORAGE). AND SUDANGRASS 
SEDAGRI BUCTRIL ® 20W HERBICIDE RECOMMENDATIONS 
APPLICATION TIMING AND SPECIFIC COMMENTS 
PRODUCT . RATE . CROP WEEDS 
, . 
SEDAGRI BUCTRIL® Preemergence Apply to corn or sorghum before See CORN AND SORGHUM 
20W planting until just prior to crop APPLICATION RATE TABLE -
1,25 - 1.875 IbsJA emergence. SEDAGRI BUCTRIL ® 20W for list of 
~ weeds and corresponding stages of 
growth that are controlled by 
l%COC SEDAGRI BUCTRIL® 20W at 
recommended rates of application. 
1.251bsJA Apply to corn after emergence but For control of additional weeds not 
prior to tassel emergence listed in the rate table see the 
~ .. GENERAL \o\EED LIST, Apply to sorghum and sudangrass 
l%COC between the 3 leaf stage but prior to 
the preboot staQe (Qrowth staQe 4), 
. 1.875 IbsJA . Apply to corn between the 4 leaf stage 
and prior to tassel emergence. 
+ Apply to sorghum and sudangrass 
l%COC "beween the 4 leaf stage but prior to 
preboot staQe (Qrowth sta~e 4), 
2.5 IbsJA 
," 
Apply to field corn only between the 4- Use the 2.5 IbsJA 'f3~ecn corn to 
leaf stage but prior to tassel control susceptible weeds that are 
~ emergence. WARNING: DO NOT growing under les~ . '''?P, optimum 
l%COC APPLY· THE 2,5 IbsJA RATE OF conditions and where SEDAGRI 
SEDAGRt BUCTRIL ® 20W' ALONE BUCTFijl!°; ~PW ~ atrazine tank 
OR IN TANK-MIXTURES TO mixtureJ cannbt be u.]tM! • " 
SORGHUM, ' . ' ", ,'.' , 
- " . 
",) ) 
.. , . 
8

CORN AND SORGHUM APPLICATION RATE TABLE - SEDAGRI BUCTRIL® 20W HERBICIDE 
WEED SPECIES1 1.251bs.lA 1.B75 to 2.5Ibs./A4 
When detennining leaf stage, Max. Max. Weed Max. Max. Weed 
count all leaves except Leaf Height Leaf Height 
coty ledonary leaves Stage (inches) Stage (inches) 
Black Nightshade (Solanum nigrum) 6 6 6 6 
Buffalobur (Solanum rostra tum) 4 2 6 4 
Burcucumber (Sicyos angulatus) 4 4 
Common Cocklebur (Xanthium strumarium) 6 8 8 10 
Common Lambsquarters (Chenopodium album) 6 8 
Common Ragweed (Ambrosia arlemisiifolia) 6 4 8 6 
Eastern Black Nightshade (Solanum ptycanthum) 6 6 6 6 
Giant Ragweed (Ambrosia trifida) 6 4 6 6 
Hemp Sesbania (Sesbania exaltata) " 4 4 
Ivyleaf Morningglory (Ipomoea hederacea) 3 3 4 4 
Jimsonweed (Datura stramonium) 4 4 6 6 
Kochia (Kochia scoparia) 2 
Ladysthumb (Polygonum persicaria) 4 4 6 6 
Pennsylvania Smartweed (Polygonum pensylvanicum) 4 4 6 6 
Pitted Morningglory (Ipomoea lacunosa) 3 3 4 4 
Redroot Pigweed 3 (Amaranthus retroflex us) 4 2 
Spiny Pigweed 3 (Amaranlhus spinosus) 4 2 
Sunflower (Helianthus annus) 4 6 6 8 
lall Morningglory (Ipomoea purpurea) 3 3 4 4 
all Waterh emp 3 (Amaranthus tUberculatus) 4 2 
Velvetleaf (Abuti/on theophrasti) 4 3 6 5 
Venice Mallow (Hibiscus trionum) 4 2 
'MId Buckwheat (Polygonum convolvulus) 4 6 6 8 
'MId Mustard (Sinapis arvensis) 4 4 
WEEDS SUPPRESSED' 
Canada Thistle (Cirsium arvense) Not Recommended 8 inch to bud stage 
11 \IIh1en determining leaf stage, count all leaves except cotyledonary leaves. 
21 SEDAGRI BUCTRIL ® 20W suppresses the growth by burning down of top growth. Regrowth may occur. 
31 Control of pigweeds in the high plains areas of Texas and Oklahoma may not be satisfactory with SEDAGRI BUCTRIL ® 20W 
Herbicide. Repeat applications may be necessary to achieve satisfactory control. 
41 Do not apply SEDAGRI BUCTRIL ® 20W at the 2.5 Ibs.lA rate to sorghum 
RESTRICTIONS AND PRECAUTIONS: Corn (Fi~ld and Pop) and Sorghum (Grain and Forage), and Sudangrass 
SEDAGRI BUCTRIL ® 20W Herbicide does not control grasses. Therefore, it is recommended that a suitable grass control program 
be used to provide any required grass control. 
Additipn of a spray additive or mixture with liquid fertilizers may cause excessive crop leafburn. 
Seed corn producers should consult the respective seed corn company regarding tolerance of certain seed production inbred lines 
to SEDAGRI BUCTRIL® 20WHerbicide. 
Do not apply SEDAGRI BUCTRIL ® 20W HerbiCide to' postemergence to seed corn inbreds or popcorn prior to the 3 leaf stage of 
crop growth as excessive crop leaf burn may occur. 
Do not plant rotational crops within 30 days following SEDAGRI BUCTRIL ® 20W Herbicide application. 
Do not cut crop for feed, fodder or graze withi,; 45 days of application. 
The total cumulative rate must not exceed 2.5.lbs.lA per season. 
Paste mergence application prior to the 3 leaf growth stage of corn or sorghum may result in increase~ c'~j.I :,eaf burn. 
Follow all restrictions and precautions on the label of all products used in tank mixture with SEDAGRI 'BUCTRll ® 2JW H~,1licide. , . ' . , . , " , 
Do not apply SEDAGRI BUCTRll ® 20W Herbicide at any rate to sorghum after the preboot stage of growth (gro·.vtn ;lage 4) as 
severe crop injury, including loss of crop yield may result. , , , ' " ; 
Do not apply the 2.51bs.lA rate of SEDAGRi BUCJRll ® 20W Herbicide to sorghum. ' , : , , ' 
9

) 
. SMALL GRAINS 
(WHEA T, BARLEY, OATS, RYE AND TRITICALE) 
SEDAGRI BUCTRIL ® 20W HERBICIDE RECOMMENDATIONS 
, '. ' 
APPLICATION TIMING AND SPECIFIC COMMENTS 
PRODUCT RATE CROP WEEDS 
SEDAGRI BUCTRIL ® 1.25 - 2.5 IbsJA Spring seeded wheat, barley, oats, Apply 1.25 IbsJA to MOST 
20W rye and triticale. Use in all states SUSCEPTIBLE and 1.875 - 2.5 Ibs.lA 
+ except Idaho, Oregon, Washinglon, to SUSCEPTIBLE weeds Ihal do nol 
1%COC Colorado, Wyoming, and Montana. exceed the 4 leaf slage or 2 inches in 
Apply from emergence up and prior 10 heighl, whichever comes first. If weed 
the .boot stage. forms rosette, apply before weeds 
exceed 1 inch in diameter. 
Use SEDAGRI BUCTRIL ® 20W al 
1.875 - 2.5 IbsJA for control of kochia 
thai is 2 - 4 inches in height and 
pigweed that does not exceed the 4 
leaf stage or 2 inches in height, 
Whichever comes first. 
1.875 - 2.51bs.lA Fall seeded wheal, barley, oals. rye Apply to MOST SUSCEPTIBLE 
and Iriticale Ihroughoul Ihe United weeds (see GENERAL WEED LIST) 
+ Slates. Apply from emergence 10 Ihe up to Ihe 8 leaf slage or 4 inches in 
1%COC boot stage. height, whichever comes first. If weed 
Spring seeded wheat, barley, oats, forms rosette apply before weeds 
rye' and triticale in Idaho, Oregon, exceed 2 inches in diameter. Apply to 
Washington, Colorado, Wyoming, and SUSCEPTIBLE broadleaf weeds up to 
. Montana . Apply from emergence up Ihe 4 leaf slage, 2 inches in heighl or 
and prior to Ihe boot stage. 1 inch in diameter, whichever comes 
first. 
Small Grains Apply 10 small grains (wheat, barley, Apply 1.25 IbsJA to MOST 
underseeded with Alfalfa oats, rye or triticale) underseeded with SUSCEPTIBLE and 1.875 Ibs.lA to 
alfalfa after small grains emergence SUSCEPTIBLE broadleaf weeds thai 
1.25 - 1.875 IbsJA up ·to :the boot stage and when do not exceed the 4 leaf stage. 2 
+ underseeded alfalfa has a minimum of inches in height or 1 inch in diameter, 
4 'trifoliate leaves. Follow all whichever comes first. 
1%COC precautions and restrictions listed 
under the small grains and seedling 
alfalfa sections. 
RESTRICTIONS AND PRECAUTIONS: Small Grains (Wheat, Barley. Oats, Rye and Triticale) 
Do not graze treated fields within 45 days following treatment. 
Do r10t apply when crops are under moisture stress. 
Do not apply when crop canopy covers the weeds as poor weed control will result. . , ' 
Do not apply when underseeded alfalfa is under mOisture, temperature, insect or disease stress or has been stressed by other 
pesticide carryover or application. 
Do not add a surfactant or crop oil when applying to underseeded alfalfa or increased injury will occur. 
Do not cut for feed or graze spring treated underseeded alfalfa within 30 days following treatment. 
Do not cut for feed or graze fall or winter treated unaerseeded alfalfa until spring, at least 60 days following Ire~tm~~' .. 
Reduced weed control may occur when weeds are stressed from lack of moisture.or cold tempera~~r~~., , 
Refer to labels of products used in tank mixture of additional restrictions and precautions. 
Do not plant rotational crops within 30 days following SEDAGRI BUCTRIL ® 20W Herbicide appIiCdt,('n. ' 
The total cumulative rate must not exceed 2.5 Ibs../A ~er season. 
10 
;/1

PRODUCT 
SEDAGRI BUCTRIL® 
20W 
/1 I /) 
FORAGE, FIBER AND SPECIALITY CROPS 
ALFALFA (SEEDLING) 
SEDAGRI BUCTRIL ® 20W HERBICIDE RECOMMENDATIONS 
RATE 
1.25 - 1.875 Ibs.lA 
+ 
1%COC 
APPLICATION TIMING AND SPECIFIC COMMENTS 
CROP 
In the states of Washington, Oregon, 
Idaho, Montana, Wyoming, Colorado, 
Utah, Nevada, Arizona, New Mexico, 
and the western halves of North 
Dakota, South Dakota, Nebraska and 
Kansas: 
Apply in the fall or spring to seedling 
alfalfa when the majority of the field 
has a minimum of 2 trifoliates. 
Unacceptable crop injury may occur to 
alfalfa seedlings less than the 2 
trifoliate stage. BUCTRIL ® application 
made when temperatures are expected 
to exceed 80°F at and 3 days following 
application can result in unacceptable 
<:ropinjury. 
In the remaining states, apply in the fall 
or spring to seedling alfalfa when the 
majority of the field has a minimum of 4 
trifoliate leaves. 'Mlen alfalfa stand is 
uneven and conditions favor leafburn, 
'unacceptable crop injury may OCGur to 
alfalfa in the 2 trifoliate or smaller stage 
of growth. If you are unsure of growth 
stage' conditions, contact your local 
extension service. SEDAGRI 
B.UCTRIL ® 20W applications made 
when temperatures are expected to 
exceed 70°F at and 3 days following 
application can result in unacceptable 
crop injury. 
Follow all other use directions listed on 
the SEDAGRI BUCTRIL ® 20W 
Herbicide label. 
WEEDS 
Apply 1.25 Ibs.lA to MOST 
SUSCEPTIBLE broadleaf weeds and 
1.875 Ibs.lA to SUSCEPTIBLE 
broadleaf weeds (See GENERAL 
\NEED LIST) when weeds do not 
exceed 4 leaf stage, 2 inches in height 
Of 1 inch in diameter, whichever comes 
first. BUCTRIL ® will not adequately 
control over-wintered pennycress, 
henbit and mustards. 
RESTRICTIONS AND PRECAUTIONS: Allalla (Seedlins) 
Crop Ie album can occur following a SEDAGRI BUCTRIL ® 20W Herbicide application. Warm, humid conditions may enhance leaf 
burn. New crop growth will not be affected. Alfalfa yield. should not be reduced although total biomass tonnage may decrease 
compared to a weedy field due to weed removal. • 
Do not apply when alfalfa is under moisture, temperature, insect or disease stress or has been stressed by other pesticide 
carryover or application. 
Do not cut for feed or graze spring treated alfalfa within 30 days following treatment. 
Do not cut for feed or graze fall or winter treated alfalfa unm spring, at least 60 days following treatment. 
The total cumulative rate of SEDAGRI BUCTRIL ® 2,OW must not exceed 2.51bs.lA per season. 
The use of Eptam® preemergence may enhance ~rop'leaf burn from postemergence application o\:SEDAGRI B'J(;l RI'~® 20W and 
should be considered prior to using SEDAGRI BUCTRll ® 20WHerbicide. ' ' , , 
Follow all restrictions and precautions on the tank mi~ture product label when a SEDAGRI BUCTR,I~ ~ ~PW He,,~;~id~ iank mixture 
is used. , , • :0 • 
Tank m;xtures with 2,4-DB may result in unacceptable' crop leaf bum especially under warm. humid weather conditionQ. 
SEDAGRI BUCTRIL ® 20W Herbicide alone can be applied to seedling alfalfa that has been underseeded int~ ·sin~li grains that 
include wheat, barley, oats, rye and triticale. ~ee !,pplication restrictions under the SMALL GRAINS SECTION. : ," 
., 
' .. ',.' ". 
,-,' .', 
11 
.... , .

, 
'I /'-1 /, ; l' 
FLAX 
(Linum usitatissimum only) 
SEDAGRI BUCTRIL ® 20W HERBICIDE RECOMMENDATIONS 
APPLICATION TIMING AND SPECIFIC COMMENTS 
PRODUCT RATE CROP WEEDS 
SEOAGRI BUCTRIL ® 1251bs.lA Apply to flax that is 2 to 8 inches in Apply to MOST SUSCEPTIBLE weeds 
20W height. Do not apply to flax during that do not exceed the 4 leaf stage, 2 
+ or after the bud stage, inches in height or 1 inch in diameter, 
l%COC whichever comes first 
RESTRICTIONS AND PRECAUTIONS: Flax (Unum usitatissium only) 
Do not apply more than 1.25 pounds of SEDAGRI BUCTRIL® 20Wper acre in a single growing season, 
Do not apply if temperatures are expected to exceed 85° F at or 3 days following application or crop injury may OCCUL 
Unacceptable crop injury may occur following a SEDAGRI BUCTRIL ® 20W Herbicide application to flax grown on high organic, 
peat type soils. 
Application under high humidity conditions can injure flax. 
Do not apply SEDAGRI BUCTRIL ® 20W Herbicide to flax with surfactants or nitrogen solutions. 
Do not use on ornamental flax. 
GARLIC 
SEDAGRI BUCTRIL ® lOW HERBICIDE RECOMMENDATIONS 
- APPLICATION TIMING AND SPECIFIC COMMENTS 
PRODUCT RATE CROP WEEDS 
SEDAGRI BUCTRIL ® 1.875 - 2.51bs.lA Apply to garlic after emergence but Apply to MOST SUSCEPTIBLE and 
20W before 12 inches in height. SUSCEPTIBLE broad leaf weeds up to 
+ the 4 leaf stage, 2 inches in height or 
l%COC 1 inch in diameter, whichever comes 
first. 
SEDAGRI BUCTRIL® 1.875 - 2.5 Ibs.lA Apply to garlic after emergence but 
20W ~efQre 12 inches in height. 
(Only fO' garlic grown in + 
'May be harvested 60 days after muck soils in l%COC treatment. Northeastern United 
States), . 
PRECAUTIONS AND RESTRICTIONS: Garlic 
Do not apply more than 2.5 pounds of SEDAGRI BUCTRIL® 20Wper acre in a single growing season. 
Use a minimum of 20 gallons per acre for ground application. 
Do not harvest within 112 days following treatment (except garlic grown in muck soils in Northeastern United Sta:es). 
, , , , ~ 
12

) 
/3 " 17 
MINT 
(ESTABLISHED PEPPERMINT AND SPEARMINT ONLY) 
SEDAGRI BUCTRIL ® 20W HERBICIDE RECOMMENDATIONS 
APPLICATION TIMING AND SPECIFIC COMMENTS 
PRODUCT RATE CROP WEEDS 
SEDAGRI BUCTRIL® 1.25 - 1.875 Ibs.lA Apply to dormant or actively growing Apply to MOST SUSCEPTIBLE and 
20W established peppermint or spearmint SUSCEPTIBLE weeds that do not 
+ crops that exhibit good vigor. exceed the 4 leaf stage, 2 inches in 
1%COC height or 1 inch in diameter, 
whichever comes first. 
RESTRICTIONS AND PRECAUTIONS: Mint 
Application made to mint when temperatures are expected to exceed 70aF at or 5 days following application may result in 
unacceptable crop injury. This injury is more likely to occur following a SEDAGRI BUCTRIL ® 20W Herbicide application in the 
spring. 
Do not apply to mint growing under adverse conditions including diseases, insects, nematodes, high salt content soil, drought, 
excessive moisture, winter damage or other environmental stress. 
Application of SEDAGRI BUCTRIL ® 20W Herbicide to mint should not be made within two weeks of a Sinbar® application or 
unacceptable crop injury may result. 
Do not use in spring on newly established mint. Fall applications to spring planted mint should be acceptable if the crop is well 
established. 
SEDAGRI BUCTRIL ® 20W Herbicide can cause tempor~ry stunting and discoloration of the mint particularly from the spring 
application. However the injury symptoms are only temporary and have not caused yield reduction. 
Use of SEDAGRI BUCTRIL ® 20W Herbicide in combination with other products may increase temporary stunting and discoloration. 
Do not harvest within 70 days following treatment. 
Do not apply more than 7 Y, Ibs. of SEDAGRI BUCTRIL ® 20W Herbicide per acre to mint in a single growing season. 
.!'" 
...... ~ . ~ 
. ., , ' ; . , 
, , ) ) . . . , , 
.)') ,. 
" , 
". ) 
13

( 
ONIONS 
SEDAGRI BUCTRIL®20W HERBICIDE RECOMMENDATIONS 
PRODUCT 
SEDAGRI BUCTRIL® 
20W 
RATE 
Preemergence 
1.25 - 1.8751bs.lA 
+ 
1%'COC 
Postemergence 
1.25 - 1.875 Ibs.lA 
+ 
1%COC 
RESTRiCtIONS AND PRECAUTIONS: Onions 
APPLICATION TIMING AND SPECIFIC COMMENTS 
CROP WEEDS 
Preemergence use is restricted to Apply SEDAGRI BUCTRIL ® 20W at 
onions grown east of the Mississippi 1.25 Ibs.lA to control MOST 
River only on muck soils containing SUSCEPTIBLE weeds and 
greater than 10% organic matter. 1.875 Ibs.lA for SUSCEPTIBLE 
Apply at least 3 to 4 days prior to weeds. Weeds should not exceed the 
emergence. Rainfall or irrigation 4 leaf stage, 2 inches in height or 1 
within 2 days following preemergence inch in diameter, whichever comes 
applications or 3 days prior to crop first. 
emergence may result in 
unacceptable crop injury. 
Preemergence applications can be 
applied using either ground or aerial 
equipment. 
Apply only to onions which have 2 to 5 
true leaves. 
Use at least 50-70 gallons of water 
per acre and apply by ground 
equipment. water volume is 
important - CONCENTRATED 
SPRAYS KILL ONIONS. Thorough 
and. uniform coverage is necessary for 
good weed control. 
In onion-producing areas, certain 
en'vironmental conditions reduce 
development of waxy coating on the 
onion leaves, thus increasing the 
possibility of injury. Dry soil, dry onion 
foliage, high light intensity, low 
humidity, and high temperatures tend 
to increase the waxy coating on onion 
leaves and thus reducing chances for 
injury. It is essential that the soil and 
onion foliage be dry at the time of 
application. Humidity should be low 
and dew should be off the plants. 
Do not apply more than 1.875 pounds of SEDAGRI BUCTRIL ® 20W per acre in a single growing season. 
The sensitivity of onions to SEDAGRI BUCTRIL ® 20IN Herbicide varies with the variety and environmental conditions. Therefore, 
even if all the label directions are followed, SEDAGRI BUCTRIL ® 20W Herbicide applications still may cause injury to onions under 
certain circumstances. 
Do not irrigate onions that have received a preemergence application of SEDAGRI BUCTRIL ® 20W Herbicide foi 2 days following 
application or within 3 days of crop emergence. 
Do not apply SEDAGRI BUCTRIL ® 20W Herbicidepreemergence to onions grown West of the Missi<"inri River. 
Do not use SEDAGRI BUCTRIL ® 20W Herbicide on onions grown under low light intensity, in are,,~ suet.: as Or~go", 'vest of the 
Cascades. . 
Do not treat onions damaged by sand, insects, or ~is~ases: 
Do not apply postemergence applications of SEDAGRI BUCTRIL e 20W Herbicide to onions with aeria'. 4'1' ,ipment. 
14 
/7

,I I 7 
GRASS CROPS 
GRASSES GROWN FOR SOD PRODUCTION 
SEEDLING AND ESTABLISHED GRASSES 
SEDAGRI BUCTRIL ® 20W HERBICIDE RECOMMENDATIONS 
RATE RATE APPLICATION TIMING AND SPECIFIC COMMENTS 
PRODUCT Per ACRE Per 1000 sa. FT. CROP WEEDS 
SEDAGRI 125 - 2.5 Ibs.lA 0.46 to 0.92 Oz. Apply to established and newly Refer to the GENERAL WEED LIST 
BUCTRIL® seeded grasses grown for sod for a listing of susceptible broadleaf 
20W + + production before the boot slage. weeds. 
1%COC 1%COC Established grasses tolerant to 
SEDAGRI BUCTRIL ® 20W include Oplimal control will be attained when 
benlgrasses, Kenlucky Bluegrass. weeds are treated in the seedling 
Fescues, Ryegrass, Bermudagrass, slage (less Ihan 4 leaf slage, 2 inches 
SI. Auguslinegrass and loyiagrass. in heighl, or 1 inch in diameter). 
SEDAGRI BUCTRIL ® 20W may also 
be used on seedling grasses such as 
Merion, . Park, Delta, or common 
) Kenfucky Bluegrasses. Pennlawn, 
Chewings, lIIahee or Alta Fescues, 
Orchard grass, Highland. Seaside or 
Astoria Bentgrasses, perennial 
Ryegrasses, Bahiagrass and 
- Zciysiagrass. 
RESTRICTIONS AND PRECAUTIONS: Grasses grown for sod production 
Do not apply more than 2.5 pounds of SEDAGRI BUCTRIL ® 20W per acre in a single growing season. 
Do not allow livestock to graze in treated areas or feed treated grasses to livestock. 
Do not apply SEDAGRI BUCTRIL ® 20W Herbicide to grasses grown for sad production with backpack or hand-held application 
equipment. . 
. . 
' .. . ' 
15 
••••• ~- ,~- ".. • •• '. ,>. ","" ~:.,- ....... ,,'--"".,- -.~. <' - -,-"--,.-:.,-.,,~, .. ~~,,

I 
)6 'I II 
NON-RESIDENTIAL TURFGRASS 
SEEDLING AND ESTABLISHED NON-RESIDENTIAL TURFGRASS 
SEDAGRI BUCTRIL ® 20W HERBICIDE RECOMMENDATIONS 
RATE RATE APPLICATION TIMING AND SPECIFIC COMMENTS 
PRODUCT Per ACRE Per 1000 so. FT. CROP WEEDS 
SEDAGRI 1.25 - 2.5 0.46 to 0.92 Oz. Apply to established and newly Refer to the GENERAL WEED LIST 
BUCTRIL ® 20W Ibs.lA seeded non-residential turfgrass when for a listing of susceptible broadleaf 
+ weeds are small and actively growing. weeds. 
+ Established turfgrasses that are 1%COC tolerant to SEDAGRI BUCTRIL ® 20W Optimal control will be attained when 
1%COC include bentgrasses, Kentucky weeds are treated in the seedling 
Bluegrass, Fescues, Ryegrass, stage (less than 4 leaf stage, 2 inches 
Bermudagrass, St. Augustinegrass in height, or 1 inch in diameter). 
and Zoyiagrass. SEDAGRI BUCTRIL ® 
20W ® may also be used on seedling 
grasses such as Merion, Pari<, Delta, 
or common Kentucky Bluegrasses, 
Pennlawn, Chewings, Iliahee or Alta 
Fescues, Orchard grass, Highland, 
Seaside or Astoria Bentgrasses, 
perennial Ryegrasses, Bahiagrass 
and Zoysiagrass. 
RESTRICTIONS AND PRECAUTIONS: Non-residential turigrasses 
Do nal apply more Ihan 2.5 pounds of SEDAGRI BUCTRIL ® 20W per acre in a single year. 
Do not allow livestock to graze in treated areas or feed trealed grasses to livestock. 
Do nol apply SEDAGRI BUCTRIL ® 20W Herbicide to non-residential turf wilh backpack or hand-held application equipment. 
RATE 
PRODUCT Per ACRE 
SEDAGRI 1.25 - 2.5 
BUCTRIL ® 20W Ibs.lA 
+ 
1%COC 
NON-CROPLAND 
NON-CROPLAND AND INDUSTRIAL SITES 
SEDAGRI BUCTRIL ® 2,OW HERBICIDE RECOMMENDATIONS 
RATE APPLICATION TIMING AND SPECIFIC COMMENTS 
Per 1000 so. FT. CROP WEEDS 
0.46 to 0.92 Oz. Apply to non-cropland and industrial Refer to the GENERAL WEED LIST 
sites, when weeds have emerged and for a listing of susceptible broad leaf 
+ are actively growing. weeds. Use adequab q:r6y volumes 
1%COC to ensure thorough coverag~. 
Optimal controL will b? 'G1ti&illect when 
weeds are treated in t~e seedling 
.. stage (I€ss ball 4 leaf ~t~g~, 2 inches 
in height: or 1 inch in diameter). rrrrrr---- - ...... ,. 
RESTRICTIONS AND PRECAUTIONS: Non-Cropland and Industrial Sites . ~ .. . . • Do not apply more than 2.5 pounds of SEDAGRIBUCTRIL ® 20W per acre in a ~ingle year. 
Do not allow livestock to graze in treated areas or feed treated plant material to livestock. 
' .... , ,., , .. 
Do not apply SEDAGRI BUCTRIL ® 20W Herbicide to non-cropland and industrial sites with backpack or hand-h~'t.l ~pplication 
equipment. 
, , 
16

I! / I 7 
LIMITED WARRANTY AND DISCLAIMER 
The manufacturer warrants (a) that this product conforms to the chemical description on the label; (b) that this product is reasonably fit 
for the purpose set forth in the directions for use when it is used in accordance with such directions; and (c) that the directions, 
warnings and other statements on this label are based upon responsible experts' evaluation of reasonable tests of effectiveness, of 
toxicity to laboratory animals and to plants, and of residues on food crops and upon reports of field experience. Tests have not been 
made on all varieties or in all states or under all conditions. THE MANUFACTURER NEITHER MAKES NOR INTENDS, NOR DOES IT 
AUTHORIZE ANY AGENT OR REPRESENTATIVE TO MAKE, ANY OTHER WARRANTIES EXPRESS OR IMPLIED AND IT 
EXPRESSLY EXCLUDES AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE. 
THIS WARRANTY DOES NOT EXTEND TO, AND THE BUYER SHALL BE SOLELY RESPONSIBLE FOR, ANY AND ALL LOSS OR 
DAMAGE VvHICH RESULTS FROM THE USE OF THIS PRODUCT IN ANY MANNER VvHICH IS INCONSISTENT VIJITH THE LABEL 
DIRECTIONS, WARNINGS OR CAUTIONS. 
BUYER'S EXCLUSIVE REMEDY AND MANUFACTURER'S OR SELLER'S EXCLUSIVE LIABILITY FOR ANY AND ALL CLAIMS 
LOSSES DAMAGE OR INJURIES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, VvHETHER OR NOT BASED 
IN CONTRACT, NEGLIGENCE, STRICT LIABILITY IN TORT OR OTHERVIJISE, SHALL BE LIMITED AT THE MANUFACTURER'S 
OPTION TO REPLACEMENT OF OR THE REPAYMENT OF THE PURCHASE PRICE FOR THE QUANTITY OF PRODUCTVIJITH 
RESPECT TO VvHICH DAMAGES ARE CLAIMED. IN NO EVENT SHALL MANUFACTURER OR SELLER BE LIABLE FOR 
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT. 
NOTICE TO BUYER 
Purchase of Ihis material does not confer any righls under palents governing this product or the use thereof in countries oUlside of the 
United Stales. 
NET CONTENTS: 10 pounds 
Rhone-Poulenc Ag Company 
P.O. Box 12014,2 T.W. Alexander Drive 
Research Triang/e Park, North Carolina 27709 
BUCTRIL is a registered trademarks of Rhone-Pou/enc. 
Raindrop is a registered trademark of Delavan Corporation 
Eptam is a registered trademark of Zeneca Inc. 
SEDAGRI BUCTRIL ® 20W Herbicide (MASTER) Approved 10128199 
17