crop-chem-docs/corpus/epa_ppls/279-3461.md

# F9387-1 HERBICIDE

- EPA Reg No: **279-3461**
- Registrant: FMC CORPORATION 
- Signal word: Caution
- Active ingredients: Fluthiacet-methyl (2.2%); Mesotrione (38.52%)
- Label accepted: 2020-07-14
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000279-03461-20200714.pdf

---
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY 
 WASHINGTON, DC 20460 
 
 
 
Amended Under Reregistration and Label Amendment v.20150612 
 
OFFICE OF CHEMICAL SAFETY 
AND POLLUTION PREVENTION 
July 14, 2020 
 
Ms. Deborah W. Clark 
Registration Manager 
FMC Corporation 
Stine Research Center 
1090 Elkton Road 
Newark, Delaware 19711 
 
Subject: Registration Review Labe l Mitigation for fluthiacet methyl 
Label Amendment – Add mitigation language and ABN 
 Product Name: F9387-1 Herbicide 
 EPA Registration Number: 279-3461 
 Application Date: March 30, 2020 & April 24, 2020 
 Decision Numbers: 562168 and 562111 
 
Dear Ms. Clark: 
 
The Agency, in accordance with the Federal Insecticide, Fungicide and Rodenticide Act 
(FIFRA), as amended, has completed reviewing all of the information submitted with your 
application to support the Registration Review of the above referenced product in connection 
with the fluthiacet methyl Final Decision, and has concluded that your submission is acceptable. 
The agency also completed review of your amended label referred to above, submitted in 
connection with registration under FIFRA, as amended, and has determined the label is also 
acceptable. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please be 
aware that the website becomes labeling under the Federal Insecticide Fungicide and Rodenticide 
Act and is subject to review by the Agency. If the website is false or misleading, the product 
would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40 
CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In addition, 
regardless of whether a website is referenced on your product’s label, claims made on the 
website may not substantially differ from those claims approved through the registration process. 
Therefore, should the Agency find or if it is brought to our attention that a website contains false 
or misleading statements or claims substantially differing from the EPA approved registration, 
the website will be referred to the EPA’s Office of Enforcement and Compliance. 
 
A stamped copy of your labeling is enclosed for your records. This labeling supersedes all 
previously accepted labeling. You must submit one copy of the final printed labeling before you 
release the product for shipment with the new labeling. Products shipped after 12 months from 
the date of this amendment must bear the new revised label. Your release for shipment of the 
product bearing the amended label constitutes acceptance of these conditions. If these conditions 
are not complied with, the registration will be subject to cancellation in accordance with FIFRA

Page 2 of 2 
EPA Reg. No. 279-3461 
Decision No. 562168 and 562111 
 
section 6. 
 
If you have any questions about this letter, please contact BeWanda Alexander by phone at 
(703)347-0313, or via email at alexander.bewanda@epa.gov. 
 
 
 
 
Enclosure 
 
Sincerely, 
 
 
Erik Kraft, Product Manager 24 
Fungicide and Herbicide Branch 
Registration Division (7505P) 
Office of Pesticide Programs

F9387-1 HERBICIDE 
(ABN: Solstice Herbicide) 
 
 
 
EPA Reg. No. 279-3461 EPA Est. XXX 
 
Active Ingredient: B y W t . 
Fluthiacet-methyl 2.20% 
M e s o t r i o n e 3 8 . 5 2 % 
Other Ingredients 5 9 . 2 8 % 
Total: 100.0%
 
 
Contains a total of 4.0 lb/gal which includes 0.216 lb ai fluthiacet-methyl and 3.784 lb ai mesotrione per gallon. 
 
Nonrefillable Container Refillable Container 
Net:_______________ OR Net:______________ 
 
 
KEEP OUT OF REACH OF CHILDREN 
CAUTION/PRECAUCION 
If you do not understand this label, find someone to explain it to you in detail. 
(Si usted no entiende esta etiqueta, busque a alguien para que se la explique a usted en detalle.) 
 
 
 
 
 
Sold By: 
FMC Corporation 
2929 Walnut Street 
Philadelphia, PA 19104
FLUTHIACET-METHYL GROUP 14 HERBICIDE 
MESOTRIONE GROUP 27 HERBICIDE
FIRST AID 
IF ON SKIN OR CLOTHING: 
x Take off contaminated clothing. 
x Rinse skin immediately with plenty of water for 15-20 minutes.
x Call a poison control center or doctor for treatment advice 
IF IN EYES: 
x Hold eye open and rinse slowly and gently with water for 15-20 minutes. 
x Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. 
x Call a poison control center or doctor for treatment advice. 
HOTLINE NUMBER: Have the product container or label with you when calling a poison control center or 
doctor, or going for treatment. You may also contact 1-800-331-3148 for emergency medical treatment 
information. 
07/14/2020
279-3461

See other panels for additional precautionary information. 
ATTENTION 
• Although this label may appear similar to the label on a product you may have used, there may be 
important label differences. Users must read, understand and strictly follow all label directions, 
precautions and restrictions. 
• It is the user’s responsibility to be sure the product is approved for sale or use on the intended crop and 
for use in the specific geographic area. 
• It is the user’s responsibility to be aware of and to follow all State or local precautions or restrictions not 
appearing on this product label. 
• Prior to purchase or use of this product, read the Conditions of Sale and Limitation of Warranty and 
Liability. If the terms and conditions are unacceptable, return the product immediately in the original and 
unopened container. 
PRECAUTIONARY STATEMENTS 
Hazards to Humans and Domestic Animals 
Caution 
Harmful if absorbed through the skin. Causes moderate eye irritation. Avoid contact with skin, eyes, or clothing. 
PERSONAL PROTECTIVE EQUIPMENT (PPE) 
Mixers, loaders, applicators, and other handlers must wear: 
Coveralls worn over long-sleeved shirt and long pants. 
Protective eyewear (goggles or face shield) 
Chemical resistant gloves including natural rubber, EDUULHUODPLQDWHEXW\OUXEEHU•PLOVRUYLWRQ•PLO. 
Shoes plus socks 
 
 
When mixing and loading wear a chemical-resistant apron. Discard clothing and other absorbent materials that have 
been drenched or heavily contaminated with this product. DO NOT reuse them. Follow manufacturer's instructions for 
cleaning/maintaining PPE. If no such instructions for washables exists, use detergent and hot water. Keep and wash 
PPE separately from other laundry. 
IMPORTANT 
When reduced PPE is worn because a closed system is being used, handlers must be provided all PPE specified above 
for "Applicators and Other Handlers" and have such PPE immediately available for use in an emergency, including a 
spill or equipment breakdown. 
 
 
USER SAFETY RECOMMENDATIONS 
USERS MUST: 
x Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco, 
or using the toilet. 
x Users should remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean 
clothing. 
x Users should remove PPE immediately after handling this product. Wash the outside of gloves before 
removing. As soon as possible, wash thoroughly and change into clean clothing.

ENGINEERING CONTROLS 
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the 
Worker Protection Standard (WPS) for agricultural pesticides [40 CFR part 170.240 (d)(4-6)], the handler PPE 
requirements may be reduced or modified as specified in the WPS. The closed system must be used in a manner that 
meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-
6)]. When using the closed system, the mixers’ and loaders’ PPE requirements may be reduced or modified as specified 
in the WPS. 
 
ENVIRONMENTAL HAZARDS 
F9387-1 HERBICIDE (referred to below as F9387-1) is very toxic to algae and moderately toxic to fish. DO NOT apply 
directly to water, to areas where surface water is present or to intertidal areas below the high water mark. DO NOT 
contaminate water when disposing of equipment wash waters or rinsate. 
Groundwater Advisory 
This chemical and its degradation products have properties and characteristics associated with chemicals detected 
in ground water. This chemical may leach into ground water if used in areas where soils are permeable, particularly 
where the water table is shallow. 
Surface Water Advisory 
This product may impact surface water quality due to spray drift and runoff of rain water. This is especially true for 
poorly draining soils and soils with shallow ground water. This product is classified as having high potential for reaching 
surface water via runoff for several months after application. A level, well-maintained vegetative buffer strip between 
areas to which this product is applied and surface water features including ponds, streams, and springs will reduce 
the potential loading of F9387-1 from runoff water and sediment. Runoff of this product will be reduced by avoiding 
applications when rainfall is forecasted to occur within 48 hours. 
Non-target Organism Advisory 
This product is toxic to plants and may adversely impact the forage and habitat of non-target organisms., including 
pollinators, in areas adjacent to the treated site. Protect the forage and habitat of non-target organisms by minimizing 
spray drift. 
 
Physical/Chemical Hazards 
 
DO NOT use or store near heat or open flame. 
 
MIXING AND LOADING INSTRUCTIONS 
This product must not be mixed or loaded within 50 feet of any wells (including abandoned wells and drainage wells), 
sink holes, perennial or intermittent streams and rivers, and natural or impounded lakes and reservoirs. This setback 
does not apply to properly capped or plugged abandoned wells and does not apply to impervious pad or properly diked 
mixing/loading areas. 
Operations that involve mixing, loading rinsing, or washing of this product into or from pesticide handling or application 
equipment or containers within 50 feet of any well are prohibited unless conducted on an impervious pad constructed to 
withstand the weight of the heaviest load that may be positioned on or moved across the pad. Such a pad shall be 
designed and maintained to contain any product spills or equipment leaks, container or equipment rinse or wash water, 
and rainwater that may fall on the pad. Surface water shall not be allowed to either flow over or from the pad, which 
means the pad must be self contained. The pad shall be sloped to facilitate material removal. An unroofed pad shall be 
of sufficient capacity to contain at a minimum 110% of the capacity of the largest pesticide container or application 
equipment on the pad. A pad that is covered by a roof of sufficient size to completely exclude precipitation from contact 
with the pad shall have a minimum containment capacity of 100% of the capacity of the largest pesticide container or 
application equipment on the pad. Containment capacities as described above shall be maintained at all times. The

above specific minimum containment capacities DO NOT apply to vehicles when delivering pesticide shipments to the 
mixing/loading site. States may have in effect additional requirements regarding wellhead setbacks and operational 
containment. 
This product must be used in a manner which will prevent back siphoning into wells, spills or improper disposal of 
excess pesticide, spray mixtures or rinsates. 
1. The spray equipment must be clean before using this product. If it is contaminated with other materials, mixing 
problems and/or clogging may occur or crop injury may occur. 
2. Prepare no more spray mixture than is needed for the immediate application, and DO NOT let the spray 
mixture stand in the spray tank overnight. 
3. Maintain maximum agitation throughout the spraying operation. 
4. Flush the spray equipment thoroughly after each use and apply rinsate to an appropriate area. 
 
 
 
 
 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This 
Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, 
and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency 
assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal 
protective equipment (PPE) and restricted-entry interval. The requirements in this box only apply to uses of this product 
that are covered by the Worker Protection Standard. 
DO NOT enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours. 
Personal Protective Equipment (PPE) required for early entry to treated areas that is permitted under the Worker 
Protection Standard and that involves contact with anything that has been treated, including plants, soil, or water, is: 
x Coveralls over long-sleeved shirt and long pants 
x Wear goggles, face shield or safety glasses 
x Chemical-resistant gloves made of any waterproof material including polyethylene or polyvinyl chloride 
x Socks and chemical resistant footwear

PESTICIDE STORAGE AND DISPOSAL 
DO NOT contaminate water food or feed by storage or disposal. 
 
Pesticide Storage 
Store the product in original container only. DO NOT contaminate water, food, or feed by storage or disposal. Store in 
a cool dry place and avoid excess heat. DO NOT store below 32F degrees. 
 
In Case of Spill 
Avoid contact. Isolate areas and keep out animals and unprotected persons. 
 
Call CHEMTREC (Transportation and spills): (800) 424-9300. 
 
To Confine Spills 
Dike surrounding area, sweep up spillage, Dispose of in accordance with information given under Pesticide Disposal. 
Wash spill area with water, absorb with sand, cat litter or commercial clay, sweep up and dispose of in an approved 
manner. Place damaged container in a large holding container. Identify contents per required hazardous waste 
labeling regulations. 
 
Pesticide Disposal 
Pesticide wastes are toxic. Improper disposal of excess pesticide, spray mixture or rinsate is a violation of Federal law. 
If these wastes cannot be disposed of by use according to label instructions, contact your State Pesticide or 
Environmental Control Agency or the Hazardous Waste representative of the nearest EPA Regional Office for 
guidance. 
 
CONTAINER DISPOSAL 
Metal or Plastic Containers - Nonrefillable container. DO NOT reuse or refill this container. Triple rinse 
container (or equivalent) promptly after emptying. Triple rinse as follows: 
 
For containers greater than 5 gallons: Empty the remaining contents into application equipment or a mix tank. Fill 
the container 1/4 full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, 
ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth 
several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. 
Repeat this procedure two more times. Then offer for recycling if available, or reconditioning, or puncture and dispose 
of in a sanitary landfill, or by other procedures approved by state and local authorities. 
 
For containers 5 gallons or less: Empty the remaining contents into application equipment or a mix tank and drain 
for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour 
rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the 
flow begins to drip. Repeat this procedure two more times. Then offer for recycling if available, or reconditioning, or 
puncture and dispose of in a sanitary landfill, or by other procedures approved by state and local authorities. DO NOT 
cut or weld metal containers. 
 
Refillable Container - Refill this container with pesticide only. DO NOT reuse this container for any other purpose. 
Cleaning the container before final disposal is the responsibility of the person disposing of the container. Cleaning 
before refilling is the responsibility of the refiller. To clean the container before final disposal, empty the remaining 
contents into application equipment or mix tank. Fill the container about 10% full with water. Agitate vigorously or 
recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection 
system. Repeat this rinsing procedure two more times. Then offer for recycling if available or reconditioning if 
appropriate or puncture and dispose of in a sanitary landfill, or by other procedures approved by state and local 
authorities.

CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY 
Notice: Read the entire Directions for Use and Conditions of Sale and Limitation of Warranty and Liability before 
buying or using this product. If the terms are not acceptable, return the product at once, unopened, and the purchase 
price will be refunded. 
The Directions for Use of this product must be followed carefully. It is impossible to eliminate all risks inherently 
associated with the use of this product. Crop injury, ineffectiveness, or other unintended consequences may result 
because of such factors as manner of use or application, weather or crop conditions beyond the control of FMC or 
Seller. To the extent consistent with applicable law, all such risks shall be assumed by Buyer and User, and, to the 
extent consistent with applicable law, Buyer and User agree to hold FMC and Seller harmless for any claims relating 
to such factors. 
Seller warrants that this product conforms to the chemical description on the label and is reasonably fit for the 
purposes stated on the Directions for Use when used in accordance with the directions under normal conditions of 
use. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, FMC MAKES NO WARRANTIES OF 
MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE, NOR ANY OTHER EXPRESS OR 
IMPLIED WARRANTIES WITH RESPECT TO THE SELECTION, PURCHASE, OR USE OF THIS PRODUCT. Any 
warranties, express or implied, having been made are inapplicable if this product has been used contrary to label 
instructions, or under abnormal conditions, or under conditions not reasonably foreseeable to (or beyond the control 
of) Seller or FMC, and, to the extent permitted by applicable law, Buyer assumes the risk of any such use. 
To the extent consistent with applicable law, FMC or Seller shall not be liable for any incidental, consequential or 
special damages resulting from the use or handling of this product. TO THE EXTENT CONSISTENT WITH 
APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY 
OF FMC AND SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES (INCLUDING CLAIMS 
BASED ON BREACH OF WARRANTY, CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR 
OTHERWISE) RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, SHALL BE THE RETURN OF 
THE PURCHASE PRICE OF THE PRODUCT OR, AT THE ELECTION OF FMC OR SELLER, THE 
REPLACEMENT OF THE PRODUCT. 
This Condition of Sale and Limitation of Warranty and Liability may not be amended by any oral or written 
agreement. 
PRODUCT INFORMATION 
F9387-1 herbicide contains two active ingredients possessing both contact and systemic activity that can be applied 
Post emergence for selective control of broadleaf weeds in field corn, seed corn, yellow pop-corn, sweet corn. DO NOT 
apply to White Popcorn or ornamental (Indian) corn. When applied as POST application it may take 2 to 15 days to kill 
the weeds on the list. The product is absorbed through the soil and /or by the weed foliage. 
For effective control of grasses, F9387-1 can be tank mixed with other POST grass herbicides to provide broader 
spectrum weed control in corn. F9387-1 application can also be combined with a burndown herbicide, prior to planting, 
to provide added burndown and residual weed control in field corn, seed corn, yellow popcorn, and sweet corn. 
It is the pesticide user's responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and direction for use on all product labels involved in tank mixing. Users must 
follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.
 
WEED RESITANCE MANAGEMENT 
F9387-1 contains both a Group 14 (fluthiacet-methyl) and a Group 27 (mesotrione) herbicide based on the mode of 
action classification system of the Weed Science Society of America. 
Proactively implementing diversified weed control strategies to minimize selection for weed populations resistant to one 
or more herbicides is a best practice. A diversified weed management program may include the use of multiple herbicides 
with different sites of action and overlapping weed spectrum with or without tillage operations and/or other cultural 
practices. 
Research has demonstrated that using the labeled rate and directions for use is important to delay the selection for 
resistance. 
The continued effectiveness of this product depends on the successful implementation of a weed resistance

management program. 
To aid in the prevention of developing weeds resistant to this product, users should: 
• Scout fields before application to ensure herbicides and rates will be appropriate for the weed species and weed 
sizes present 
• Start with a clean field, using either a burndown herbicide application or tillage. 
• Control weeds early when they are relatively small (less than 4 inches). 
• Apply full rates of F9387-1 for the most difficult to control weed in the field at the specified time (correct weed size) 
to minimize weed escapes. 
• Scout fields after application to detect weed escapes or shifts in control of weed species. 
• Control weed escapes before they reproduce by seed or proliferate vegetatively. 
• Report any incidence of non-performance of this product against a particular weed to your FMC representative, 
local retailer, or county extension agent. 
• Contact your FMC representative, crop advisor, or extension agent to find out if suspected resistant weeds to this 
MOA have been found in your region. If resistant biotypes of target weeds have been reported, use the application 
rates of this product specified for your local conditions. Tank mix products so that there are multiple effective sites 
of actions for each target weed. 
• If resistance is suspected, treat weed escapes with an herbicide having a site of action other than Group 14 and 
Group 27 and/or use nonchemical methods to remove escapes, as practical, with the goal of preventing further 
seed production. 
• Suspected herbicide-resistant weeds may be identified by these indicators: 
• Failure to control a weed species normally controlled by the herbicide at the dose applied, especially if 
control is achieved on adjacent weeds; 
• A spreading patch of non-controlled plants of a particular weed species; and 
• Surviving plants mixed with controlled individuals of the same species. 
Additionally, users should follow as many of the following herbicide resistance management practices as is practical: 
• Use a broad spectrum soil-applied herbicide with other sites of action as a foundation in a weed control program. 
• Utilize sequential applications of herbicides with alternative sites of action. 
• Rotate the use of this product with non-Group 14/Group 27 herbicides. 
• Incorporate non-chemical weed control practices, including mechanical cultivation, crop rotation, cover crops and 
weed-free crop seeds, as part of an integrated weed control program. 
• Use good agronomic principles that enhance crop development and crop competitiveness. 
• Thoroughly clean plant residues from equipment before leaving fields suspected to contain resistant weeds. 
• Manage weeds in and around fields, during and after harvest to reduce weed seed production.

DIRECTIONS FOR USE 
Misuse Statement 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
FAILURE TO FOLLOW THE DIRECTIONS FOR USE AND PRECAUTIONS ON THIS LABEL MAY RESULT IN POOR 
WEED CONTROL, CROP INJURY, OR ILLEGAL RESIDUES. 
Utilize a sprayer equipped with the appropriate nozzles providing optimum spray distribution and coverage at the 
appropriate operating pressures. Utilize nozzles that produce minimal amounts of fine spray droplets to avoid spray drift. 
Apply a minimum of 10 gallons of finished spray solution per acre by ground. If a dense crop and or weed canopy is 
present use a minimum of 15 gallons per acre of finished spray volume by ground application. For best results apply 
F9387-1 with medium spray droplets. The sprayer must be properly calibrated to deliver the appropriate volume of 
herbicide solution. Be aware that overlaps and slower ground speeds while starting, stopping or turning while spraying 
may result in excessive application and subsequent crop response. Mix the amount which will be used for spraying on 
that day. 
Restrictions 
• DO NOT exceed 3.15 fl oz of F9387-1 /A (0.0053 lb ai/A fluthiacet-methyl + 0.0931 lb ai/A mesotrione) in a single 
postemergence application. 
• DO NOT apply more than a total of 5.25 fl oz of F9387-1/A (0.0089 lb ai/A fluthiacet-methyl + 0.155 lb ai/A 
mesotrione) per year including preplant burndown and labeled postemergence applications to corn. 
• DO NOT exceed 2 applications of F9387-1 per year. 
• DO NOT apply more than 0.0089 lb ai/A of fluthiacet-methyl or 0.24 lb ai/A of mesotrione per year including all 
preplant or postemergence herbicides containing these active ingredients. 
• DO NOT make the second application of F9387-1 within 14 days of the first application. 
• DO NOT harvest or feed forage within 45 days after application. 
• DO NOT harvest or feed grain or stover (fodder) within 70 days after application. 
• DO NOT harvest or feed sweet corn forage or ears within 40 days after application. 
• DO NOT include nitrogen based adjuvants (UAN or AMS) when making postemergence applications of F9387-1 
to yellow popcorn or sweet corn. 
• DO NOT apply F9387-1 to white popcorn or ornamental (Indian) corn. 
• DO NOT apply to corn that is more than 12 inches in height if atrazine is mixed with F9387-1 
• DO NOT apply this product through any type of irrigation system. 
• DO NOT use aerial application to apply F9387-1. 
• DO NOT harvest or feed field corn forage until 30 days after the last application. 
• DO NOT apply this product with suspension fertilizers as the carrier. 
• DO NOT apply product postemergence in a tank mix with emulsifiable concentrate grass herbicides, unless 
specifically addressed under one of the tank mix sections of this label, or injury may occur. 
Precautions 
1. Avoid drift onto adjacent crops. 
2. Severe corn injury may occur if F9387-1 is applied postemergence to corn that was treated with Counter® (EPA 
Reg. No. 5481-562, Terbufos) or Lorsban® (Lorsban® 15G Granular Insecticide (62719-34), Lorsban 50W in 
Water Soluble Packets Insecticide (62719-221), Lorsban® Advanced Insecticide (62719-591), Lorsban®-4E 
insecticide (62719-220), Chlorpyrifos) in-furrow at planting, which may result in corn crop yield loss. 
3. Severe corn injury may occur if F9387-1 is applied foliar postemergence in a tank mix with any organophosphate 
or carbamate insecticide which may result in corn crop yield loss. 
4. Severe corn injury may occur if any organophosphate or carbamate insecticide is applied foliar postemergence 
within 7 days before or 7 days after F9387-1 application, which may result in corn crop yield loss. 
5. DO NOT cultivate corn within 7 days before or after a F9387-1 application as weed control from the F9387-1 
application may be reduced.

Rainfastness 
F9387-1 requires a minimum of 1 hour rain-free period after application for best results when applied postemergence. 
Cultivation 
DO NOT cultivate immediately prior to post-emergence application. Cultivation may put weeds under stress, reducing 
weed control. Timely cultivation 1-3 weeks after applying F9387-1 may assist weed control. 
 
POSTEMERGENCE GROUND APPLICATION 
Spray nozzles must be uniformly spaced, the same size and type, and must provide accurate and uniform application. 
Use spray nozzles that provide medium to coarse droplet size to provide good coverage and avoid drift. Good coverage 
of foliage is essential for optimum weed control. Boom height for broadcast over-the-top applications must be based on 
the height of the crop - at least 18 inches above the crop canopy. 
Apply in a spray volume of 10-30 gals./A. Use a pump that can maintain a pressure of at least 35-40 psi at the nozzles 
and provide proper agitation within the tank to keep the product dispersed. Lower pressures may be used with extended 
range or drift reduction nozzles. When weed foliage is dense, use a minimum of 15 gals. 
Flat fan nozzles of 80° or 110° are advised for optimum postemergence coverage. 
DO NOT use floodjet nozzles, extremely coarse droplet nozzles, or controlled droplet application equipment for 
postemergence applications. 
Nozzles may be angled forward 45° to enhance penetration of the crop and provide better coverage. Ensure that all in-
line strainer and nozzle screens in the sprayer are 50-mesh or coarser. 
Always ensure that agitation is maintained until spraying is completed, even if stopped for brief periods of time. If the 
agitation is stopped for more than 5 minutes, re-suspend the spray solution by running on full agitation prior to spraying. 
 
Adjuvant Requirements 
An adjuvant or a product containing an adjuvant is required with F9387-1 for maximum consistent performance. Only 
spray additives cleared for use on growing crops under 40 CFR 180.1001 may be used in spray mixture. 
 
Postemergence Applications to Field Corn and Seed Corn 
Add crop oil concentrate (COC) to the Postemergence application at the rate of 0.5 to 1.0 gal./100 gals. of water (0.5% 
to 1.0% v/v). The use of a nonionic surfactant (NIS) at 1 qt./100 gallons of water (0.25% v/v) instead of COC is allowed, 
but the weed control achieved with COC is consistently better than NIS. The use of methylated seed oil (MSO) adjuvants 
or MSO blend adjuvants for postemergence applications of F9387-1 may cause severe crop injury. In addition to COC, 
always add spray grade UAN (e.g., 28-0-0) to the spray solution at a rate of 2.5% (v/v) or AMS at 8.5 lb./100 gals. of 
spray solution, except if precluded elsewhere on this label. If F9387-1 is being tank mixed with another registered 
herbicide in this situation, refer to the tank mix partner label for adjuvant precautions and restrictions and follow the most 
restrictive requirements. 
DO NOT use liquid fertilizer as the total carrier solution except for preplant burndown applications. 
 
Postemergence Applications to Sweet Corn and Yellow Popcorn 
DO NOT add UAN or AMS when making postemergence applications of F9387-1 to yellow popcorn or sweet 
corn, or severe crop injury may occur. 
For postemergence applications to yellow popcorn and sweet corn , use nonionic surfactant (NIS) at 1 qt./100 
gallons of water (0.25% v/v) to minimize the risk of crop injury. A COC may be used, and will increase the level of weed 
control achieved, especially under dry growing conditions, but the risk of crop injury is increased. For optimum control, 
the addition of atrazine is advised wherever rotational or local atrazine restrictions allow.

Mixing F9387-1 Alone 
1. Add 1/4-1/2 of the required amount of clean water to the spray or mixing tank. 
2. With the agitator running, add the required amount of F9387-1 to the spray tank. Continue agitation in the spray 
tank and allow product to fully and uniformly disperse. 
3. Add the spray adjuvant and continue agitation while adding the rest of the water. 
4. Maintain agitation until all of the mixture has been applied. 
 
Mixing F9387-1 in Tank Mixtures with Other Pesticides 
F9387-1 is compatible with most commonly used herbicides, insecticides, fungicides, and spray adjuvants. Follow WALE 
(Wettable/dry, Agitate, Liquids, and Emulsifiable Concentrates) mixing guidelines. It is the pesticide user’s responsibility 
to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations 
and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for 
use and precautionary statements of each product in the tank mixture. If the instructions on the tank mix partner label 
conflicts with this F9387-1 label, DO NOT use in a tank mixture with F9387-1. 
 
Tank Mixing Steps 
1. Add 1/4 -1/2 of the required amount of clean water to the spray or mixing tank. 
2. While maintaining agitation, continue filling the spray tank. When the tank is 3/4 full, add any dry formulation tank 
mix partners and allow them to completely and uniformly disperse. 
3. Add the required amount of F9387-1 to the spray tank while maintaining agitation. After the product has completely 
and uniformly dispersed into the tank mix, add any other liquid tank mix partners and allow them to completely 
and uniformly disperse. 
4. Add the proper amount of spray adjuvant and continue agitation while adding the remaining water. 
5. Complete filling the tank with clean water and maintain sufficient agitation at all times to insure surface action until 
the mixture is uniform. 
6. After use, thoroughly clean the sprayer according to this label (see Cleaning Spray Equipment) and any tank mix 
partner labels. 
Compatibility Test 
A jar test is advised before mixing to ensure F9387-1 compatibility with tank mix partners and adjuvants. The following 
test assumes a spray volume of 25 gallons per acre. For other spray volumes, make appropriate changes in the 
ingredient rates. 
1. Add 1.0 pt. of water to each of 2 one-quart jars. 
Note: Use the same source of water and the other components in the compatibility test that will actually be tank 
mixed and applied. It is important that all components are mixed at a temperature similar to the temperature of 
those used for the actual application. 
2. To one of the jars, add 1/4 tsp. or 1.2 milliliters of a compatibility agent approved for this use (1/4 tsp. is equivalent 
to 2 pt/100 gallons spray). Shake or stir gently to mix. 
3. To both jars, add the appropriate amount of herbicide(s). If more than one herbicide is used, add them separately 
with dry herbicides first, flowables next, and emulsifiable concentrates last. Finally, add the appropriate amount 
of any adjuvants that will be used. After each addition, shake or stir gently to thoroughly mix. The appropriate 
amount of herbicides for this test follows: 
Dry Herbicides and Adjuvants: For each pound to be applied per acre, add 1.4 tsp. to each jar. 
Liquid Herbicides and Adjuvants: For each pint to be applied per acre, add 0.5 tsp. or 2.5 milliliters to each jar.

4. After adding all ingredients, put lids on and tighten, and invert each jar 10 times to mix. Let the mixtures stand 15-
30 minutes and look for separation, large flakes, precipitates, gels, heavy oil film on the jar, or other signs of 
incompatibility. Determine if a compatibility agent is needed in the spray mixture by comparing the two jars. If 
either mixture separates, but can be remixed readily, the mixture can be sprayed as long as good agitation is 
used. If the mixtures are incompatible, test the following methods of improving compatibility. 
a. Slurry the dry pesticide(s) in water before addition, or 
b. Add 1/2 the compatibility agent to the water and the other 1/2 to the emulsifiable concentrate or flowable 
pesticide before addition to the mixture. If incompatibility is still observed, DO NOT use the mixture. 
After compatibility testing is complete, dispose of any pesticide wastes according to the Storage and Disposal section 
of this label.

MANDATORY SPRAY DRIFT MANAGEMENT 
Ground Boom Applications: 
• Apply with the nozzle height recommended by the manufacturer, but no more than 3 feet above the ground or 
crop canopy. 
• For applications prior to the emergence of crops and target weeds, applicators are required to use a Coarse 
or coarser droplet size (ASABE S572.1). 
• For all other applications, applicators are required to use a Medium or coarser droplet size (ASABE S572.1). 
• DO NOT apply when wind speeds exceed 10 miles per hour at the application site. 
• DO NOT apply during temperature inversions. 
SPRAY DRIFT MANAGEMENT ADVISORIES 
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT. 
BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS. 
IMPORTANCE OF DROPLET SIZE 
An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide target pest 
control. While applying larger droplets will reduce spray drift, the potential for drift will be greater if applications are 
made improperly or under unfavorable environmental conditions. 
Controlling Droplet Size – Ground Boom 
Volume - Increasing the spray volume so that larger droplets are produced will reduce spray drift. Use the highest 
practical spray volume for the application. If a greater spray volume is needed, consider using a nozzle with a higher 
flow rate. 
Pressure - Use the lowest spray pressure recommended for the nozzle to produce the target spray volume and droplet 
size. 
Spray Nozzle - Use a spray nozzle that is designed for the intended application. Consider using nozzles designed to 
reduce drift. 
BOOM HEIGHT – Ground Boom 
Use the lowest boom height that is compatible with the spray nozzles that will provide uniform coverage. For ground 
equipment, the boom must remain level with the crop and have minimal bounce. 
SHIELDED SPRAYERS 
Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify that the 
shields are not interfering with the uniform deposition of the spray on the target area. 
TEMPERATURE AND HUMIDITY 
When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation. 
TEMPERATURE INVERSIONS 
Drift potential is high during a temperature inversion. Temperature inversions are characterized by increasing 
temperature with altitude and are common on nights with limited cloud cover and light to no wind. The presence of an 
inversion can be indicated by ground fog or by the movement of smoke from a ground source or an aircraft smoke 
generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an 
inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing. Avoid applications 
during temperature inversions. 
WIND 
Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND CONDITIONS. 
Applicators need to be familiar with local wind patterns and terrain that could affect spray drift. 
HANDHELD TECHNOLOGY APPLICATIONS 
Take precautions to minimize spray drift

DRIFT CONTROL ADDITIVES 
Using product compatible drift control additives can reduce drift potential. When a drift control additive is used, read 
and carefully observe cautionary statements and all other information on the additive’s label. If using an additive that 
increases viscosity, ensure that the nozzles and other application equipment will function properly with a viscous spray 
solution. 
Preferred drift control additives have been certified by the Council of Producers & Distributors of Agrotechnology (CPDA). 
CROP ROTATION RESTRICTIONS 
Immediate: Corn (field, seed, sweet corn and pop) 
Following harvest of corn the following crops may be planted immediately: Asparagus, cranberry, flex, 
millet(pearl), grasses grown for seed (Kentucky bluegrass, perennial ryegrass, and tall fescue), oats, rhubarb, sorghum 
(grain and sweet), and sugarcane. 
Following harvest of corn and not less than 4 months after application of F9387-1, the following crops may be 
planted: Small grains including wheat, barley, and rye. 
Following harvest of corn and not less than 10 months after application of F9387-1, the following crops may be 
planted: Alfalfa, blueberry, canola, cotton, lingonberry, peanuts, potatoes, soybeans, sunflowers, tobacco, okra and rice 
can be planted back the following season. If F9387-1 is applied postemergence following a mesotrione-containing 
preemergence herbicide, only corn (field, seed and pop) or grain sorghum may be replanted the year following 
application or severe crop injury may occur. 
Following harvest of corn and not less than 18 months after application of F9387-1, the following crops may be 
planted: Sugar beets, dry beans, snap beans, cucurbits, red clover, and all other rotational crops may be replanted 18 
months after application of F9387-1. 
REPLANTING INSTRUCTIONS 
If replanting is necessary in fields previously treated with F9387-1, the field may be replanted to Corn (field, seed and 
pop). If tank-mix combinations were used, refer to product labels for any additional replanting instructions. 
SPRAYER EQUIPMENT CLEAN-OUT 
Many pesticides are very active at low rates, especially to sensitive crops. Residues left in mixing equipment, spray 
tanks, hoses, spray booms and nozzles can cause crop effects if they are not properly cleaned. As soon as possible 
after spraying F9387-1 and before using the sprayer equipment for any other applications, the sprayer equipment must 
be thoroughly cleaned using the following procedure. In addition, users must take appropriate steps to ensure proper 
equipment clean-out for any other products mixed with F9387-1 as required on the other product labels. More complete 
cleaning can be achieved if the spray system is cleaned immediately following the application. 
1. Drain sprayer tank, hoses, spray boom and spray nozzles. Use a high-pressure detergent wash to remove 
physical sediment and residues from the inside of the sprayer tank and thoroughly rinse. Then, thoroughly flush 
sprayer hoses, spray boom and spray nozzles with a clean water rinse. Remove and clean spray tips and all 
filters and screens (tank, spray hose and spray tips) separately in the ammonia solution of Step 2. 
2. Next, prepare a sprayer cleaning solution by adding three gallons of ammonia (containing at least 3% active) 
per 100 gallons of clean water. Prepare sufficient cleaning solution to allow the operation of the spray system 
for a minimum of 15 minutes to thoroughly flush hoses, spray boom and spray nozzles. 
3. Convenient and thorough cleaning of the sprayer can be achieved if the ammonia solution or fresh water is left 
in the spray tank, hoses, spray booms and spray nozzles overnight or during storage. 
4. Before using the sprayer, completely drain the sprayer system. Rinse the tank with clean water and flush through 
the hoses, spray boom, and spray nozzles with clean water. Remove and clean spray tips and all filters and 
screens (tank, spray hose and spray tip) separately in an ammonia solution. 
5. Properly dispose of all cleaning solution and rinsate in accordance with Federal, State, and local regulations and 
guidelines. 
6. DO NOT apply sprayer cleaning solutions or rinsate to sensitive crops.

7. If the sprayer sets overnight or for any extended period of time with F9387-1 spray solution, the spray tank needs 
to be agitated and purge the spray boom and nozzles before beginning any application. 
8. Small quantities of F9387-1 remaining in inadequately cleaned mixing, loading and/or spray equipment, could 
be released during subsequent applications potentially causing effects to certain crops and other vegetation. 
FMC accepts no liability for any effects due to inadequately cleaned equipment. 
9. When F9387-1 has been tank mixed refer to the label of the product used previously or tank mixed with F9387-
1 for cleaning instructions. 
10. DO NOT drain or flush equipment on or near desirable trees or plants. 
11. DO NOT contaminate any body of water including irrigation water that may be used on other crops. 
 
WEEDS CONTROLLED 
F9387-1 Application Alone 
At the rates and weed size listed, F9387-1 controls or suppresses the weeds listed in Table 1 when the product is applied 
alone. Weeds larger than the size indicated in Table 1 may only be partially controlled. For best postemergence results, 
apply F9387-1 to actively growing weeds. Dry weather following application of F9387-1 may reduce residual weed control 
effectiveness. F9387-1 applied alone or in mixture with atrazine will not provide consistent or effective control of weeds 
identified as resistant to postemergence group 27 herbicides. 
Table 1. Weeds controlled or partially controlled by postemergence activity of F9387-1 herbicide 
Common Name Scientific Name 
*F9387-1 
2.5 to 3.15 fl oz/A 
*F9387-1 
2.5-3.15 fl oz/A + Atrazine1 
 Apply to Weeds <5 Inches Tall2 
Amaranth, palmer Amaranthus palmeri PC C3 
Amaranth, powell Amaranthus powellii C C 
Amaranth, spiny Amaranthus spinosus C C 
Atriplex Chenopodium orach C C 
Broadleaf signalgrass Urochloa platyphylla C3 C3 
Buckwheat, wild Polygonum convolvulus PC C3 
Buffalobur Solanum rostratium C C 
Burcucumber Sicyos angulatus C3 C3 
Carpetweed Mollugo verticillata C C 
Carrot, wild Daucus carota PC C 
Chickweed, common Stellaria media C C 
Cocklebur, common Xanthium strumarium C C 
Crabgrass, large Digitaria sanguinalis C3 C3 
Dandelion Taraxacum officinale PC PC 
Dock, curly Rumex crispus PC PC 
Galinsoga Galinsoga parviflora C C 
Hemp Cannabis sativa C C 
Horsenettle Solanum carolinense PC C 
Jimsonweed Datura stramonium C C 
Horseweed (marestail) Conyza Canadensis PC C3 
Knotweed, prostrate Polygonum aviculare PC PC 
Kochia Kochia scoparia PC C3 
Lambsquarters, common Chenopodium album C C 
Mallow, Venice Hibiscus trionum C C

Common Name Scientific Name 
*F9387-1 
2.5 to 3.15 fl oz/A 
*F9387-1 
2.5-3.15 fl oz/A + Atrazine1 
Morningglory, entireleaf lpomoea hederacea C3 C 
Morningglory, ivyleaf lpomoea hederacea C3 C 
Morningglory, pitted lpomoea lacunose C3 C 
Mustard, wild Brassica kaber C C 
Nightshade, black Solanum nigrum C C 
Nightshade, Eastern black Solanum ptycanthum C C 
Nightshade, hairy Solanum sarrachoides C C 
Nutsedge, yellow Cyperus esculentus PC PC 
Pigweed, redroot Amaranthus retroflexus C C 
Pigweed, smooth Amaranthus hybridus C C 
Pigweed, tumble Amaranthus albus C C 
Pokeweed, common Phytolacca americana PC PC 
Potatoes, volunteer Solanum spp. C C 
Pusley, Florida Richardia scabra C3 C3 
Ragweed, common Ambrosia artemisiifolia PC C 
Ragweed, giant Ambrosia trifida C3 C 
Sesbania, hemp Sesbania. Exaltata C C 
Sida, prickly (teaweed) Sida spinosa NC C3 
Smartweed, lady’s thumb Polygonum persicaria C3 C 
Smartweed, pale Polygonum lapathifolium C C 
Smartweed, Pennsylvania Polygonum pensylvanicum C3 C 
Sunflower, common Helianthus annuus C C 
Thistle, Canada Circium arvense NC PC 
Thistle, Russian Salsola kali C C 
Velvetleaf Abutilon theophrasti C C 
Waterhemp, common Amaranthus rudis C3 C 
Waterhemp, tall Amaranthus tuberculatus C3 C 
1F9387-1 tank mixture with atrazine at a minimum rate of 0.5lb ai/A. 
2Under certain situations weeds can be controlled at larger than listed sizes, however to protect crop yield, manage weed 
resistance and provide consistent control, treat weeds before they exceed 5 inches in height. 
3Apply before weed exceeds 3 inches in height. F9387-1 will not provide control of weed biotypes known to be resistant 
to herbicide MOA group 14 and 27. 
C = Control PC = Partial Control NC = Not Controlled 
*F9387-1 2.5 to 3.15 fl oz/A (0.0042 – 0.0053 lb ai/A fluthiacet-methyl + 0.074 – 0.0931 lb ai/A mesotrione)

CROP USE DIRECTIONS 
CORN 
(Includes field corn, seed corn, sweet corn and yellow popcorn) 
Timing and Method of Application: 
Preplant Burndown 
Apply F9387-1 Herbicide from 2 to 3.75 fl oz/A (0.0034 – 0.0063 lb ai/A fluthiacet-methyl + 0.0591 – 0.111 lb ai/A 
mesotrione) with other registered burndown herbicides in water or liquid fertilizers as a burn-down treatment to control 
or suppress weeds prior to planting. For improved broadleaf weed control with limited residual control prior to planting 
corn and before corn emergence, apply F9387-1 in tank mixes with Aim® (EPA Reg. No. 279-3241,Carfentrazone-ethyl), 
paraquat, glyphosate, glufosinate, dicamba, Sharpen ® (EPA Reg. No. 7969-278, Saflufenacil), and 2,4-D. Refer to 
individual product labels for precautionary statements, restrictions, rates, approved uses, and a list of weeds controlled. 
Always use the most restrictive label language when applied in a tank mix. For optimum performance make applications 
to actively growing weeds. 
Postemergence Application 
Use Rate: Apply F9387-1 at 2.5 to 3.15 fl oz/A (0.0042 – 0.0053 lb ai/A fluthiacet-methyl + 0.074 – 0.0931 lb ai/A 
mesotrione) Refer to weed table 1 for specific use rate requirements. 
F9387-1 may be applied broadcast postemergence up to the V8 growth stage (or 30 inches tall). The spray boom must 
be maintained at a minimum of 18 inches above the crop canopy to ensure uniform spray delivery and avoid 
concentrating spray in corn whorls. For optimum performance, make application to actively growing weeds <5 inches 
tall and rosettes less than 3 inches across. Application after weeds have reached the listed maximum height for control 
could result in commercially unacceptable weed control. F9387-1 herbicide may be tank mixed with other herbicides 
registered for use in corn to improve weed spectrum or general weed control unless restricted under the corn crop 
section. 
Refer to seed company requirements for use on field corn inbred lines. Special adjuvant restrictions must be followed 
for postemergence applications of F9387-1 in yellow popcorn or sweet corn (see the spray adjuvant recommendation in 
the Directions For Use Section). 
Postemergence applications (after crop emergence) of F9387-1 may cause crop bleaching, leaf speckling in field corn, 
yellow popcorn and sweet corn hybrids. Crop bleaching, leaf speckling is typically transitory and has no effect on final 
yield or quality. However, herbicide sensitivity in yellow popcorn and sweet corn varies widely, and all yellow popcorn 
and sweet corn hybrids have not been tested. Contact your popcorn or sweet corn company, Field man, or University 
Specialist about hybrid requirements before making a postemergence application of F9387-1 to yellow popcorn or sweet 
corn. 
 
 
 
 
 
NOTICE TO BUYER: Purchase of this material does not confer any rights under patents of countries outside of the 
United States. 
FMC and Aim
® are trademarks or registered trademarks of FMC Corporation or an affiliate. 
Sharpen® is a trademark of BASF 
 
 
D-4446 071320 
 
FMC Corporation, 2929 Walnut Street, Philadelphia, PA 19104 
© 2007-2020 FMC Corporation. All rights reserved.