crop-chem-docs/corpus/epa_ppls/279-3643.md

# F4413-1

- EPA Reg No: **279-3643**
- Registrant: FMC CORPORATION 
- Signal word: Caution
- Active ingredients: Flutriafol (26.2%); Fluindapyr (15.7%)
- Label accepted: 2024-11-13
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000279-03643-20241113.pdf

---
November 13, 2024 
 
Faith Kee 
Registration Manager 
FMC Corporation 
2929 Walnut Street 
Philadelphia, PA 19104 
 
Subject: PRIA Label Amendment –Flui ndapyr to add a new food use for soybean 
 Product Name: F4413-1 
 EP A Registration Number: 279-3643 
 Application Date: 8/2/2022 
 Case Number: 476975 
 
Dear Faith Kee: 
 
The application referred to above, submitted under the Federal Insecticide, Fungicide, and 
Rodenticide Act (FIFRA), as amended, is acceptable under FIFRA section 3(c)(5). 
 
You must submit and/or cite all data required for registration/reregistration/registration review 
of your product when the Agency requires all registrants of similar products to submit such 
data. 
 
A stamped copy of your labeling is enclosed for your records. This labeling supersedes all 
previously accepted labeling. The next label printing of this product must use this labeling 
unless subsequent changes have been approved. You must submit one (1) copy of the final 
printed labeling before you release the product for shipment with the new labeling. In 
accordance with 40 CFR 152.130(c), you may distribute or sell this product under the previously 
approved labeling for 18 months from the date of this letter. After 18 months, you may only 
distribute or sell this product if it bears this new revised labeling or subsequently approved 
labeling. “To distribute or sell” is defined under FIFRA section 2(gg) and its implementing 
regulation at 40 CFR 152.3. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please 
be aware that the website becomes labeling under FIFRA and is subject to review by the 
Agency. If the website is false or misleading, the product would be misbranded and unlawful to 
sell or distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) lists examples of

Page 2 of 2 
EPA Reg. No. 279-3643 
Case No. 476975 
 
statements EPA may consider false or misleading. In addition, regardless of whether a website 
is referenced on your product’s label, claims made on the website may not substantially differ 
from those claims approved through the registration process. Therefore, should the Agency find 
or if it is brought to our attention that a website contains false or misleading statements or 
claims substantially differing from the EPA approved registration, the website will be referred 
to the EPA’s Office of Enforcement and Compliance. 
 
Your release for shipment of the product constitutes acceptance of these conditions. If these 
conditions are not complied with, the registration will be subject to cancellation in accordance 
with FIFRA section 6. 
 
If you have any questions, please contact Carmen Swinger at swinger.carmen@epa.gov. 
 
 S i n c e r e l y , 
 
 
 
 C y n t h i a L . G i l e s - P a r k e r , C h i e f 
 F u n g i c i d e B r a n c h 
 R e g i s t r a t i o n D i v i s i o n ( 7 5 0 5 T ) 
Enclosure -stamped “accepted” label

F 4413-1 [Optional text appears in brackets] 
EPA Reg. No. 279-3643 
 
 
 
 1 
 
 
 
 
 
FLUINDAPYR Group 7 Fungicide 
FLUTRIAFOL Group 3 Fungicide 
 
F4413-1 
 
{Alternate Brand Name: } 
{When an alternate brand name is used, it will also be used in the body of the label.} 
 
For use on corn (field corn, field corn grown for seed, popcorn, and sweet corn), grain 
sorghum, soybean, wheat, triticale, and barley. 
 
ACTIVE INGREDIENTS: 
Fluindapyr 15.7% 
Flutriafol 2 6.2% 
OTHER INGREDIENTS: 58.1% 
TOTAL: 100.0% 
 
Contains 1.5 pounds per gallon of the active ingredient fluindapyr and 2.5 pounds per 
gallon of the active ingredient flutriafol. 
Suspension Concentrate. 
 
Keep Out of Reach of Children 
CAUTION / PRECAUCION 
 
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en 
detalle. 
(If you DO NOT understand the label, find someone to explain it to you in detail.) 
 
IN CASE OF A MEDICAL EMERGENCY INVOLVING THIS PRODUCT, CALL 
TOLL FREE, DAY OR NIGHT, 1-800- 331-3148 
 
 – OR – 
 
For MEDICAL EMERGENCY 
1-866-331-3148 
For SPILLS 
CHEMTREC 
1-800-424-9300 
 
11/13/2024
279-3643

F 4413-1 [Optional text appears in brackets] 
EPA Reg. No. 279-3643 
 
 
 
 2 
Notice: Read the entire Directions for Use and Conditions of Sale and Limitation of 
Warranty and Liability before buying or using this product. If the terms are not 
acceptable, return the product at once, unopened, and the purchase price will be 
refunded. 
 
 
Note to PM, the following bracketed statements are individually optional depending on 
the packaging configuration and whether a booklet label design is used: 
 
a. [See First Aid statement on back [label] [panel] [of booklet]]. 
b. [See additional precautionary statements and Directions for Use in booklet.] 
c. [Read the entire label before using this product.] 
d. [See First Aid, Precautionary Statements, and Directions for Use on individual 
packages.] 
 
 
 
EPA Reg. No. 279-3643 EPA Est. No._______ Net Contents: 
_____ 
 
 
Sold by:
 
FMC Corporation 
2929 Walnut Street 
Philadelphia, PA 19104 
 
 
 
[ placeholder is a registered trademark of FMC]

F 4413-1 [Optional text appears in brackets] 
EPA Reg. No. 279-3643 
 
 
 
 3 
PRECAUTIONARY STATEMENTS 
 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
Caution. Harmful if swallowed. Wash thoroughly with soap and water after handling and 
before eating, drinking, chewing gum, using tobacco, or using the toilet. 
 
FIRST AID 
 
If swallowed: 
- Call a poison control center or doctor immediately for treatment advice. 
- Have person sip a glass of water if able to swallow. 
- DO NOT induce vomiting unless told to by a poison control center or doctor. 
- DO NOT give anything by mouth to an unconscious person. 
 
If on skin: 
- Take off contaminated clothing. 
- Rinse skin immediately with plenty of water for 15-20 minutes. 
- Call a poison control center or doctor for treatment advice. 
 
If in eyes: 
- Hold eye open and rinse slowly and gently with water for 15-20 minutes. 
- Remove contact lenses, if present, after the first 5 minutes, then continue rinsing. 
- Call a poison control center or doctor for treatment advice. 
Hotline Number 
Have the product container or label with you when calling a poison control center or 
doctor, or going for treatment. You may also contact 1-800-331-3148 for emergency 
medical treatment information. 
Note to Physician: No specific antidote. Treat symptomatically. 
 
 
PERSONAL PROTECTIVE EQUIPMENT (PPE) 
Applicators and all other handlers must wear: long-sleeved shirt and long pants, 
chemical-resistant gloves of one of the following types; Barrier Laminate, Butyl Rubber 
≥ 14 mils, Nitrite Rubber ≥ 14 mils, Neoprene Rubber ≥ 14 mils, Polyvinyl Chloride 
(PVC) ≥ 14 mils, and Viton ≥ 14 mils., and shoes plus socks. 
 
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions 
for washables exist, use detergent and hot water. Keep and wash PPE separately from 
other laundry. 
 
ENGINEERING CONTROLS STATEMENT 
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets 
the requirements listed in the Worker Protection Standard (WPS) for agricultural 
pesticides [40 CFR 170.240(d)(4-6)], the handler PPE requirements may be reduced or 
modified as specified in the WPS.

F 4413-1 [Optional text appears in brackets] 
EPA Reg. No. 279-3643 
 
 
 
 4 
For all liquid formulations for mixers and loaders: Removable chemical extraction 
probes (also known as “stingers”) used in suction/extraction systems must be rinsed 
within the pesticide container prior to removal. 
 
 
ENVIRONMENTAL HAZARDS 
This formulated product is toxic to fish and aquatic invertebrates. DO NOT apply 
directly to water, or to areas where surface water is present or to intertidal areas below 
the mean high water mark. DO NOT contaminate water when disposing of equipment 
washwater or rinsate. 
 
This product is not acutely toxic to pollinators; however, chronic exposure to the product 
through pollen and nectar may cause risk to pollinators. Protect pollinators by following 
label directions intended to limit exposure. 
 
Ground Water Advisory: Flutriafol has properties and characteristics associated with 
chemicals detected in ground water. This chemical may leach into ground water if used 
in areas where soils are permeable, particularly where the water table is shallow. 
 
Surface Water Advisory: This product may impact surface water quality due to runoff of 
rain water. This is especially true for poorly draining soils and soils with shallow ground 
water. This product is classified as having a high potential for reaching surface water 
via runoff for several months or more after application. 
 
 
USER SAFETY RECOMMENDATIONS 
Users must: 
• Remove clothing/PPE immediately if pesticide gets inside. Then wash 
thoroughly and put on clean clothing. 
• Remove PPE immediately after handling this product. Wash the outside of 
gloves before removing. As soon as possible, wash thoroughly and change 
into clean clothing.

F 4413-1 [Optional text appears in brackets] 
EPA Reg. No. 279-3643 
 
 
 
 5 
DIRECTIONS FOR USE 
 
It is a violation of Federal law to use this product in any manner inconsistent with its 
labeling. DO NOT apply this product in a way that will contact workers or other persons, 
either directly or through drift. Only protected handlers may be in the area during 
application. For any requirements specific to your State or Tribe, consult the agency 
responsible for pesticide regulation. 
 
[Note to Reviewer: Below is optional state specific language.] 
 
[Optional language for CA: In California, this product may only be applied to 
fields that are not irrigated, or are irrigated using pressurized irrigation methods 
including macro-sprinkler, micro-sprinkler, or drip systems.] 
 
[Optional language for NY: Not for sale, distribution, or use in Nassau or Suffolk 
Counties of New York State.] 
 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Workers Protection 
Standard, 40 CFR part 170. This Standard contains requirements for the protection of 
agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of 
agricultural pesticides. It contains requirements for training, decontamination, 
notification and emergency assistance. It also contains specific instructions and 
exceptions pertaining to the statements on this label about Personal Protective 
Equipment (PPE) and restricted-entry interval. The requirements in this box only apply 
to uses of this product that are covered by the Worker Protection Standard. 
 
DO NOT enter or allow worker entry into treated areas during the restricted entry 
interval (REI). The REI for each crop is located in the use directions for each crop. 
 
PPE required for early entry to treated areas that is permitted under the Worker 
Protection Standard and that involves contact with anything that has been treated, 
including plants, soil or water, is: coveralls, chemical resistant gloves, and shoes plus 
socks.

F 4413-1 [Optional text appears in brackets] 
EPA Reg. No. 279-3643 
 
 
 
 6 
 
STORAGE AND DISPOSAL 
DO NOT contaminate water, food or feed by storage or disposal. 
 
Pesticide Storage: Store unused product in original container in a cool, dry, secure 
area. 
 
Pesticide Disposal: Pesticide wastes may be hazardous. Improper disposal of excess 
pesticide, spray mixture or rinsate is a violation of Federal Law. If these wastes cannot 
be disposed of by use according to label instructions, contact your State Pesticide or 
Environmental Control Agency, or the Hazardous Waste Representative at the nearest 
EPA Regional Office for guidance. 
 
Container Handling: 
Nonrefillable container. [equal to or less than 5 gallons] 
DO NOT reuse or refill this container. Offer for recycling if available or puncture and 
dispose of in a sanitary landfill, or by incineration, or, if allowed by state and local 
authorities, by burning. If burned, stay out of smoke. 
Triple rinse as follows: Empty the remaining contents into application equipment or a 
mix tank and drain for 10 seconds after the flow begins to drip. Fill the container ¼ full 
with water and recap. Shake for 10 seconds. Pour rinsate into application equipment 
or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the 
flow begins to drip. Repeat this procedure 2 more times. 
 
Nonrefillable container. [greater than 5 gallons] [and less than 260 gallons] 
DO NOT reuse or refill this container. Offer for recycling if available, or puncture and 
dispose of in a sanitary landfill, or by incineration, or if allowed by state and local 
authorities, by burning. If burned, stay out of smoke. 
Triple rinse or pressure rinse as follows: 
Triple rinse as follows: Empty the remaining contents into application equipment or mix 
tank. Fill the container ¼ full with water. Replace and tighten closures. Tip container 
on its side and roll it back and forth, ensuring at least one complete revolution, for 30 
seconds. Stand the container on its end and tip it back and forth several times. Turn 
the container over onto its other end and tip it back and forth several times. Empty the 
rinsate into application equipment or a mix tank and store rinsate for later use or 
disposal. Repeat this procedure two more times. 
Pressure rinse as follows: Empty the remaining contents into application equipment or a 
mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold 
container upside down over application equipment or a mix tank or collect rinsate for 
later use or disposal. Insert pressure rinsing nozzle in the side of the container, and 
rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins 
to drip.

F 4413-1 [Optional text appears in brackets] 
EPA Reg. No. 279-3643 
 
 
 
 7 
 
{Note to PM, IBC’s may be nonrefillable or refillable, the container handling section will 
state either Nonrefillable or Refillable.} 
Nonrefillable container. {or} 
Refillable container. 
Bottom discharge IBC. 
Pressure rinsing the container before final disposal is the responsibility of the person 
disposing of the container. To pressure rinse the container before final disposal, empty 
the remaining contents from the IBC into application equipment or mix tank. Raise the 
bottom of the IBC by 1.5 inches on the side which is opposite of the bottom discharge 
valve to promote more complete product removal. Completely remove the top lid of the 
IBC. Use water pressurized to at least 40 PSI to rinse all interior portions. Continuously 
pump or drain rinsate into application equipment or rinsate collection system while 
pressure rinsing. Continue pressure rinsing for 2 minutes or until rinsate becomes 
clear. Replace the lid and close bottom valve.

F 4413-1 [Optional text appears in brackets] 
EPA Reg. No. 279-3643 
 
 
 
 8 
PRODUCT DIRECTIONS 
 
READ ENTIRE LABEL. USE STRICTLY IN ACCORDANCE WITH 
PRECAUTIONARY STATEMENTS AND DIRECTIONS, AND WITH APPLICABLE 
STATE AND FEDERAL REGULATIONS. 
 
Not for use in greenhouses. 
 
Chemigation: 
 
Application through Irrigation Systems (Chemigation): 
Apply F4413-1 through irrigation to crops at rates and timings specified in this label. 
Chemical tank and injector system must be thoroughly cleaned before and after use. 
Flush system with clean water. 
 
Sprinkler Irrigation: Apply this product through sprinkler irrigation systems including 
center pivot, lateral move, end tow, side (wheel) roll, traveler, big gun, solid set, micro 
sprinkler or hand move irrigation systems. DO NOT apply this product through any other 
type of irrigation system except as specified on this label. 
 
With Center Pivot irrigation equipment, use F4413-1 only with equipment with drive 
systems that provide uniform water distribution. DO NOT use end guns for chemigation 
due to the non-uniform application pattern. 
 
Add F4413-1 to the pesticide supply tank containing sufficient water to maintain a 
continuous flow by the injection equipment. Maintain agitation during the entire 
application period. 
 
For continuous-move irrigation systems, apply the labeled rate for that crop in ½ acre-inch 
or less per acre. For stationary or non-continuous moving systems, inject F4413-1 spray 
mixture during the last 20-30 minutes of the set. 
 
DO NOT apply when winds are greater than 10-15 mph to avoid drift or wind skips. DO 
NOT apply when wind speed favors drift beyond the area intended for treatment. Crop 
injury, lack of effectiveness, or illegal pesticide residues in the crop can result from non-
uniform distribution of treated water. Thorough coverage of foliage is required for good 
control. 
 
If you have questions about calibration you must contact a State Extension Service 
specialist, equipment manufacturer or other expert.

F 4413-1 [Optional text appears in brackets] 
EPA Reg. No. 279-3643 
 
 
 
 9 
 
Operating Requirements for Application through Irrigation Systems: 
1. DO NOT use chemigation when conditions are favorable for drift to non-target areas. 
2. To prevent water-source contamination from backflow, a functional check valve, 
vacuum relief valve, and low-pressure drain must be located on the irrigation pipeline. 
3. To prevent backflow back toward the injection pump, the pesticide injection pipeline 
must be equipped with a functional, automatic, quick-closing check valve. 
4. To prevent fluid from being withdrawn from the supply tank when the irrigation system 
is shut down, the pesticide injection pipeline must also be equipped with a functional, 
normally closed, solenoid-operated valve located on the intake side of the injection 
pump and connected to the system interlock. 
5. The system must also contain functional interlocking controls to automatically shut off 
the pesticide injection pump when the water pump motor stops and a functional 
pressure switch to stop the pump motor when water pressure decreases to a point at 
which pesticide distribution is adversely affected. 
6. A metering pump, constructed of materials compatible with pesticides and capable of 
being fitted with a system interlock, including a positive displacement injection pump 
(e.g., a diaphragm pump), must be included in the system. 
7. A knowledgeable person responsible for the chemigation system must shut the 
system down and turn the irrigation water off, ensuring enough time for the pesticide 
to be flushed through all lines and nozzles. 
8. No irrigation system, including those in greenhouses, used to distribute pesticides can 
be connected to a public water source unless safety measures and devices prescribed 
in the pesticide label for such connection are in place. 
 
Specific Instructions for Public Water Systems: 
1. Public water system means a system that provides piped water for human 
consumption if the system has at least 15 service connections or regularly serves an 
average of at least 25 individuals daily at least 60 days out of the year. 
2. All measures and devices listed in the above section, “Operating Requirements for 
Application through Irrigation Systems”, must be operational for connection to a public 
water system. 
3. Additionally, chemigation systems connected to public water systems must contain a 
functional, reduced-pressure zone, back-flow preventer (RPZ) or the functional 
equivalent in the water supply line upstream from the point of pesticide introduction. 
As an option to the RPZ, the water from the public water system must be discharged 
into a reservoir tank prior to pesticide introduction. There must be a complete physical 
break (air gap) between the outlet end of the fill pipe and the top or overflow rim of the 
reservoir tank of at least twice the inside diameter of the fill pipe.

F 4413-1 [Optional text appears in brackets] 
EPA Reg. No. 279-3643 
 
 
 
 10 
Crop Rotation: Fields treated with F4413-1 may be planted to the following crops and 
plant back intervals: 
 
Crop Plant back Interval 
Barley; field corn; field corn grown for 
seed; sweet corn; popcorn; grain 
sorghum; soybean; tree nuts; triticale; or 
wheat 
Immediately 
Alfalfa; cotton; cucurbits; fruiting 
vegetables; grapes; hops; Brassica leafy 
vegetables crop group 5; leafy 
vegetables, except Brassica, crop group 
4; peanut; pome fruit; rice; stone fruit; 
strawberry; sugar beet; tomato 
12 months 
All other crops Prohibited 
 
Compatibility Jar Test: F4413-1 is compatible with most products, however not all 
combinations have been tested. Use the following compatibility jar test to ensure 
physical compatibility. 
 
Using a quart jar, add the proportionate amounts of the products to approximately one 
quart of water with agitation. Add wettable powders and water dispersible granular 
products first, next liquid flowables, then emulsifiable concentrates, and last liquid 
soluble products. After thorough mixing, allow this mixture to stand for 5 minutes. If the 
combination remains mixed or can be readily remixed, it is physically compatible. Once 
compatibility has been proven, use the same procedure for adding products to the spray 
tank. Use tank mix combinations on a small number of plants before treating larger 
areas. When tank mixing, follow more restrictive labeling of any tank mix partner. DO 
NOT tank mix with any product that contains a prohibition on tank mixing. 
 
Use of Adjuvants: An adjuvant may be used with F4413-1 unless otherwise specified 
in the crop use directions. F4413-1 is compatible with most products, however not all 
have been tested. Use the compatibility jar test to ensure physical compatibility. 
 
Tank Mixing: Not all crops within a crop group or varieties, cultivars or hybrids of 
those crops have been tested for crop safety. F4413-1 may be tank mixed with other 
fungicides, herbicides, insecticides, and/or other additives unless prohibited on the 
label of the tank mix partner. Although F4413-1 is compatible with most products, not 
all combinations have been tested. Use the compatibility jar test to ensure physical 
compatibility. Before applying F4413-1 or any tank mixture not specifically advised on 
this label, the crop safety of the target crop must be confirmed by applying the mixture 
to a small area of the target crop in accordance to the label instructions. It is the 
pesticide user’s responsibility to ensure that all products are registered for the 
intended use on all product labels involved in tank mixing. Users must follow the most 
restrictive directions for use and precautionary statements of each product in the tank 
mixture.

F 4413-1 [Optional text appears in brackets] 
EPA Reg. No. 279-3643 
 
 
 
 11 
 
Spray Equipment/Volume: F4413-1 must be applied in sufficient water volume to 
ensure thorough coverage as a broadcast foliar application for good disease control. 
For ground application, apply a minimum of 10 gallons of spray solution per acre. 
 
For aerial application, apply a minimum of 2 gallons of spray solution per acre for all 
crops. 
 
Resistance Management: F4413-1 is a mixture of two different modes of action for 
management of isolates that may have reduced sensitivity to either mode of action. 
Fluindapyr is a member of FRAC group 7 which inhibits succinate dehydrogenase 
(SDHI). Flutriafol, a member of FRAC group 3, is a demethylation inhibitor (DMI). 
 
Resistant fungal strains may be selected when fungicides with the same mode of action 
(i.e in the same FRAC group) are used repeatedly on the same pathogens within a 
single growing season. To reduce selection pressure and maintain good performance of 
F4413-1, DO NOT exceed the number of applications specified in the crop use 
directions for each individual crop or crop group. F4413-1 must be used preventively 
(i.e. before disease occurs). For assistance on a particular crop and disease control 
situation, consult your local agricultural dealer, consultant, applicator, or state extension 
personnel for specific practices or guidance in your area. 
 
Resistance Management Advisory: In addition to the above requirements for the use 
of F4413-1, additional resistance management techniques are advised to maintain the 
longevity of F4413-1 and other fungicides in FRAC groups 3 and 7. 
1. Use integrated pest management techniques to reduce overall disease pressure. 
2. If tank mixed with a partner from a different FRAC group, use each partner at a 
rate that gives effective disease control when used individually. 
3. DO NOT make more than two consecutive applications of fungicides in either 
FRAC groups 3 or 7. Rotate to products that have alternate modes of action (i.e. 
are not included in FRAC groups 3 or 7). 
 
High Disease Pressure: Where a range is given, use the higher rate of F4413-1 
and/or reduced spray interval when disease pressure is high and/or conditions are 
favorable for disease development.

F 4413-1 [Optional text appears in brackets] 
EPA Reg. No. 279-3643 
 
 
 
 12 
MANDATORY SPRAY DRIFT MANAGEMENT 
Airblast Applications: 
• Sprays must be directed into the canopy. 
• DO NOT apply when wind speeds exceed 15 miles per hour at the application site. 
• User must turn off outward pointing nozzles at row ends and when spraying outer 
row. 
• DO NOT apply during temperature inversions. 
Ground Boom Applications: 
• User must only apply with the release height specified by the manufacturer, but no 
more than 4 feet above the ground or crop canopy and have minimal bounce. 
• Applicators are required to use a Medium to Coarse droplet size (ASABE S572.1). 
• DO NOT apply when wind speeds exceed 15 miles per hour at the application site. 
• DO NOT apply during temperature inversions. 
Boomless Ground Applications: 
• Applicators are required to use a Medium to Coarse droplet size (ASABE S572.1) 
for all applications. 
• DO NOT apply when wind speeds exceed 15 miles per hour at the application site. 
• DO NOT apply during temperature inversions. 
 
SPRAY DRIFT ADVISORIES 
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT. 
BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL 
CONDITIONS. 
IMPORTANCE OF DROPLET SIZE 
An effective way to reduce spray drift is to apply large droplets. Use the largest 
droplets that provide target pest control. While applying larger droplets will reduce 
spray drift, the potential for drift will be greater if applications are made improperly or 
under unfavorable environmental conditions. 
Controlling Droplet Size – Ground Boom 
• Volume - Increasing the spray volume so that larger droplets are produced will 
reduce spray drift. Use the highest practical spray volume for the application. If a 
greater spray volume is needed, consider using a nozzle with a higher flow rate. 
• Pressure - Use the lowest spray pressure specified for the nozzle to produce the 
target spray volume and droplet size. 
• Spray Nozzle - Use a spray nozzle that is designed for the intended application. 
Consider using nozzles designed to reduce drift.

F 4413-1 [Optional text appears in brackets] 
EPA Reg. No. 279-3643 
 
 
 
 13 
BOOM HEIGHT – Ground Boom 
For ground equipment, the boom must remain level with the crop and have minimal 
bounce. 
SHIELDED SPRAYERS 
Shielding the boom or individual nozzles can reduce spray drift. Consider using 
shielded sprayers. Verify that the shields are not interfering with the uniform deposition 
of the spray on the target area. 
TEMPERATURE AND HUMIDITY 
When making applications in hot and dry conditions, use larger droplets to reduce 
effects of evaporation. 
TEMPERATURE INVERSIONS 
Drift potential is high during a temperature inversion. Temperature inversions are 
characterized by increasing temperature with altitude and are common on nights with 
limited cloud cover and light to no wind. The presence of an inversion can be indicated 
by ground fog or by the movement of smoke from a ground source or an aircraft smoke 
generator. Smoke that layers and moves laterally in a concentrated cloud (under low 
wind conditions) indicates an inversion, while smoke that moves upward and rapidly 
dissipates indicates good vertical air mixing. Avoid applications during temperature 
inversions. 
WIND 
Drift potential generally increases with win
 d speed. AVOID APPLICATIONS DURING 
GUSTY WIND CONDITIONS. Applicators need to be familiar with local wind patterns 
and terrain that could affect spray drift. 
BOO
MLESS GROUND APPLICATIONS 
Setting nozzles at the lowest effective height will help to reduce the potential for spray 
drift. 
HANDHELD TECHNOLOGY APPLICATIONS: 
• Take precautions to minimize spray drift. 
 
RATE EQUIVALENCY TABLE 
 
 
 
Product rate 
fl oz/A 
4 lb/gal 
 
Total Active 
Ingredient Rate 
(lb ai/A) 
Equivalent Fluindapyr 
Active Ingredient Rate 
(lb ai/A) 
Equivalent Flutriafol 
Active Ingredient Rate 
(lb ai/A) 
3.5 0.109 0.041 0.068 
4.5 0.141 0.053 0.088 
5.0 
 
0.157 0.059 0.098 
5.8 0.181 0.068 0.113

F 4413-1 [Optional text appears in brackets] 
EPA Reg. No. 279-3643 
 
 
 
 14 
CROP USE DIRECTIONS 
 
Use Directions for Corn (Field Corn, Field Corn Grown for Seed, Sweet Corn, and 
Popcorn) 
[Not for use in California] 
Diseases Product 
Rate 
(fl oz/A) 
Application Directions 
Anthracnose leaf blight 
(Colletotrichum graminicola) 
 
Common rust (Puccinia 
sorghi) 
 
Diplodia ear rot and stalk rot 
(Stenocarpella macrospora, 
Stenocarpella maydis) 
 
Eyespot (Kabatiella 
zeae) 
 
Gray leaf spot (Cercospora 
zeae-maydis) 
 
Northern corn leaf blight 
(Exserohilum turcicum) 
 
Northern corn leaf spot 
(Bipolaris zeicola) 
 
Physoderma brown spot 
(Physoderma maydis) 
 
Southern corn leaf blight 
(Bipolaris maydis) 
 
Southern rust (Puccinia 
polysora) 
 
 
4.5 to 5.8 Apply preventatively or 
when conditions are 
favorable for disease 
development. Repeat as 
necessary if conditions 
are favorable for disease 
development. Apply no 
later than growth stage 
R4 (early dough stage). 
Use higher rates and 
shorter interval when 
disease pressure is 
severe.

F 4413-1 [Optional text appears in brackets] 
EPA Reg. No. 279-3643 
 
 
 
 15 
Restrictions: 
• DO NOT apply to sweet corn by mechanically pressurized handgun. 
• No single application may exceed 5.8 fl. oz. of product (0.068 lb fluindapyr, 0.113 
lb flutriafol)/A. 
• Minimum retreatment interval (RTI) is 10 days. 
• DO NOT apply more than 2 applications per year. 
• DO NOT apply more than 11.6 fl. oz. of product/A per year. 
• DO NOT apply more than 0.228 lb. ai of flutriafol/A per year. 
• DO NOT apply more than 0.27 lb. ai of fluindapyr/A per year. 
• Adjuvant crop injury can occur when an adjuvant is used after the V8 stage and 
prior to VT stage corn. If an adjuvant is used after V8 and prior to VT stage, the 
user grower or user are responsible for contacting the adjuvant supplier 
(manufacturer, distributor, retailer) for advice and assurance that the adjuvant has 
been tested and proved safe to application to corn from V8 to VT stages. Refer to 
adjuvant label for specific use directions and restrictions and always follow the 
most restrictive label. 
• Restricted Entry Interval (REI)is 14 days for detasselling corn grown for seed and 
for hand harvesting sweet corn. The REI for all other activities is 12 hours. 
• Preharvest Interval (PHI) is 7 days for forage, 14 days for sweet corn, and 30 days 
for stover and grain.

F 4413-1 [Optional text appears in brackets] 
EPA Reg. No. 279-3643 
 
 
 
 16 
Use Directions for Wheat (Spring and Winter), Triticale, and Barley 
[Not for use in California] 
 
Diseases Product 
Rate 
(fl oz/A) 
Application Directions 
Leaf rust 
(Puccinia triticina, P. hordei) 
 
Net blotch (Drechslera 
teres) 
 
Powdery mildew 
(Blumeria graminis) 
 
Septoria leaf blotch 
(Zymoseptoria tritici) 
 
Stagonospora leaf / glume 
blotch 
 (Parastagonospora 
nodorum) 
 
Stem rust (Puccinia 
graminis) 
 
Stripe rust (Puccinia 
striiformis) 
 
 
Tan spot (Pyrenophora 
tritici-repentis) 
 
 
 
3.5 to 5.8 Apply preventatively or 
when conditions are 
favorable for disease 
development. Repeat as 
necessary if conditions are 
favorable for disease 
development. 
 
Apply lower rates in the 
early season. 
 
Application of high rate at 
flag leaf ligule emergence 
protects the upper foliage 
during critical grain fill 
period. 
 
 
Restrictions: 
• No single application may exceed 5.8 fl. oz. of product (0.068 lb fluindapyr, 0.113 
lb flutriafol)/A. 
• Minimum retreatment interval (RTI) is 10 days. 
• DO NOT apply more than 2 applications per year. 
• DO NOT apply more than 11.6 fl oz of product/A per year. 
• DO NOT apply more than 0.228 lb ai of flutriafol/A per year. 
• DO NOT apply more than 0.27 lb ai of fluindapyr/A per year. 
• Restricted Entry Interval (REI) is 12 hours. 
• Preharvest Interval (PHI) is 7 days for forage, 14 days for hay, and 30 days for straw 
or grain.

F 4413-1 [Optional text appears in brackets] 
EPA Reg. No. 279-3643 
 
 
 
 17 
 
Use Directions for Grain Sorghum 
[Not for use in California] 
 
Diseases Product 
Rate 
(floz/A) 
Application Directions 
Anthracnose Leaf Blight 
 (Colletotrichum graminicola) 
 
Ergot 
 (Claviceps africana) 
 
Gray Leaf Spot 
 (Cercospora sorghi) 
 
Rust, Common 
 (Puccinia purpurea) 
 
5.8 
For Ergot make first 
application at, or just prior 
to, flowering. 
 
For all other diseases 
apply preventatively or 
when conditions are 
favorable for disease 
development. Repeat as 
necessary if conditions are 
favorable for disease 
development. Use higher 
rates and shorter interval 
when disease pressure is 
severe. 
 
 
Restrictions: 
• No single application may exceed 5.8 fl. oz. of product (0.068 lb fluindapyr, 0.113 
lb flutriafol)/A. 
• Minimum retreatment interval (RTI) is 10 days. 
• DO NOT apply more than 2 applications per year. 
• DO NOT apply more than 11.6 fl oz of product/A per year. 
• DO NOT apply more than 0.228 lb. ai of flutriafol/A per year. 
• DO NOT apply more than 0.27 lb ai of fluindapyr/A per year 
• Restricted Entry Interval (REI) is 12 hours. 
• Preharvest Interval (PHI) is 30 days for forage, stover or grain.

F 4413-1 [Optional text appears in brackets] 
EPA Reg. No. 279-3643 
 
 
 
 18 
Use Directions for Soybean 
[Not for use in California] 
 
Diseases Product 
Rate 
(fl oz/A) 
Application Directions 
Anthracnose 
(Colletotrichum truncatum) 
 
Brown spot 
(Septoria glycines) 
 
Cercospora leaf blight and 
purple seed 
stain(Cercospora kikuchii) 
 
Frogeye leaf spot 
(Cercospora sojina) 
 
Powdery mildew 
(Erysiphe diffusa) 
 
Rust 
(Phakopsora pachyrhizi) 
 
Target spot 
(Corynespora cassiicola) 
 
White mold 
(Sclerotinia sclerotiorum) 
4.5 to 5.8 Apply preventatively or when conditions are 
favorable for disease development. Repeat as 
necessary if conditions are favorable for 
disease development. Use higher rate and 
shorter interval when disease pressure is 
severe. 
 
 
 
Restrictions: 
• No single application may exceed 5.8 fl. oz. of product (0.068 lb fluindapyr, 0.113 lb 
flutriafol)/A. 
• Minimum retreatment interval (RTI) is 14 days. 
• DO NOT apply more than 2 applications per year. 
• DO NOT apply more than 11.6 fl oz of product/A per year. 
• DO NOT apply more than 0.488 lb. ai of flutriafol/A per year. 
• DO NOT apply more than 0.224 lb ai of fluindapyr/A per year 
• Restricted Entry Interval (REI) is 12 hours. 
• DO NOT feed forage or hay to animals or permit animals to graze. 
• Preharvest Interval (PHI) is 7 days for forage or hay and 21 days for seed.

F 4413-1 [Optional text appears in brackets] 
EPA Reg. No. 279-3643 
 
 
 
 19 
 
 
CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY 
 
NOTICE: Read the entire Directions for Use and Conditions of Sale and Limitation of 
Warranty and Liability before buying or using this product. If the terms are not 
acceptable, return the product at once, unopened, and the purchase price will be 
refunded. 
 
The Directions for Use of this product must be followed carefully. It is impossible to 
eliminate all risks inherently associated with the use of this product. Crop injury, 
ineffectiveness, or other unintended consequences may result because of such factors 
as manner of use or application, weather or crop conditions beyond the control or FMC 
or Seller. All such risks shall be assumed by Buyer and User, and Buyer and User 
agree to hold FMC and Seller harmless for any claims relating to such factors. 
 
Seller warrants that this product conforms to the chemical description on the label and is 
reasonably fit for the purposes stated on the Directions for Use when used in 
accordance with the directions under normal conditions of use. To the extent consistent 
with applicable law, FMC MAKES NO WARRANTIES OF MERCHANTABILITY OR OF 
FITNESS FOR A PARTICULAR PURPOSE, NOR ANY OTHER EXPRESS OR 
IMPLIED WARRANTIES WITH RESPECT TO THE SELECTION, PURCHASE, OR 
USE OF THIS PRODUCT. Any warranties, express or implied, having been made are 
inapplicable if this product has been used contrary to label instructions, or under 
abnormal conditions, or under conditions not reasonably foreseeable to (or beyond the 
control of) seller or FMC, and buyer assumes the risk of any such use. 
 
To the extent consistent with applicable law, FMC or seller shall not be liable for any 
incidental, consequential or special damages resulting from the use or handling of this 
product. 
 
To the extent consistent with applicable law, THE EXCLUSIVE REMEDY OF THE 
USER OR BUYER, AND THE EXCLUSIVE LIABILITY OF FMC AND SELLER FOR 
ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES (INCLUDING CLAIMS 
BASED ON BREACH OF WARRANTY, CONTRACT, NEGLIGENCE, TORT, STRICT 
LIABILITY OR OTHERWISE) RESULTING FROM THE USE OR HANDLING OF THIS 
PRODUCT, SHALL BE THE RETURN OF THE PURCHASE PRICE OF THE 
PRODUCT OR, AT THE ELECTION OF FMC OR SELLER, THE REPLACEMENT OF 
THE PRODUCT. 
 
This Conditions of Sale and Limitation of Warranty and Liability may not be amended by 
any oral or written agreement. 
 
[placeholder are registered trademarks of FMC] 
 
 Label code: D-4719 072922032624

F 4413-1 [Optional text appears in brackets] 
EPA Reg. No. 279-3643 
 
 
 
 20 
SUPPLEMENTAL LABELING 
 
 
 
 
 
 
 
F4413-1 
EPA Reg. No. 279-3643 
FLUINDAPYR Group 7 Fungicide 
FLUTRIAFOL Group 3 Fungicide 
 
For use on soybean and soybean as a rotational crop. 
 
THIS SUPPLEMENTAL LABEL EXPIRES ON May 31, 2027 
AND MUST NOT BE USED OR DISTRIBUTED AFTER THIS DATE 
DIRECTIONS FOR USE 
 
It is a violation of Federal Law to use this product in a manner inconsistent with its 
labeling. 
 
Read the entire label. This label must be in the possession of the user at the time of 
application. Read the label affixed to the container for F4413-1 before applying. Use of 
F4413-1 according to this labeling is subject to the use precautions and limitations 
imposed by the label affixed to the F4413-1container. 
 
Crop Rotation: Fields treated with may be planted to the following crops and plant back 
intervals: 
 
Crop Plant back Interval 
Barley; field corn; field corn grown for 
seed; sweet corn; popcorn; grain 
sorghum; soybean; tree nuts; triticale; or 
wheat 
Immediately 
Alfalfa; cotton; cucurbits; fruiting 
vegetables; grapes; hops; Brassica leafy 
vegetables crop group 5; leafy 
vegetables, except Brassica, crop group 
4; peanut; pome fruit; rice; stone fruit; 
strawberry; sugar beet; tomato 
12 months 
All other crops Prohibited 
 
 
11/13/2024
279-3643

F 4413-1 [Optional text appears in brackets] 
EPA Reg. No. 279-3643 
 
 
 
 21 
CROP USE DIRECTIONS 
Use Directions for SOYBEAN 
 
[Not for use in California] 
 
Diseases Product 
Rate 
(fl oz/A) 
Application Directions 
Anthracnose 
(Colletotrichum truncatum) 
 
Brown spot 
(Septoria glycines) 
 
Cercospora leaf blight and 
purple seed 
stain(Cercospora kikuchii) 
 
Frogeye leaf spot 
(Cercospora sojina) 
 
Powdery mildew 
(Erysiphe diffusa) 
 
Rust 
(Phakopsora pachyrhizi) 
 
Target spot 
(Corynespora cassiicola) 
 
White mold 
(Sclerotinia sclerotiorum) 
4.5 to 5.8 Apply preventatively or when conditions are 
favorable for disease development. Repeat as 
necessary if conditions are favorable for 
disease development. Use higher rate and 
shorter interval when disease pressure is 
severe. 
 
 
 
Restrictions: 
• No single application may exceed 5.8 fl. oz. of product (0.068 lb fluindapyr, 0.113 lb 
flutriafol)/A. 
• Minimum retreatment interval (RTI) is 14 days. 
• DO NOT apply more than 2 applications per year. 
• DO NOT apply more than 11.6 fl oz of product/A per year. 
• DO NOT apply more than 0.488 lb. ai of flutriafol/A per year. 
• DO NOT apply more than 0.224 lb ai of fluindapyr/A per year 
• Restricted Entry Interval (REI) is 12 hours. 
• DO NOT feed forage or hay to animals or permit animals to graze. 
• Preharvest Interval (PHI) is 7 days for forage or hay and 21 days for seed. 
 
 
 
Label Code D-4736 072922032624