crop-chem-docs/corpus/epa_ppls/33270-23.md

# TREMOR NXT

- EPA Reg No: **33270-23**
- Registrant: WINFIELD SOLUTIONS, LLC
- Signal word: Warning
- Active ingredients: Acetochlor (75.9%)
- Label accepted: 2018-02-08
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/033270-00023-20180208.pdf

---
February 8, 2018
Subject:
Dear Ms. Finstad:
Sincerely,
Notification Label Revisions Requested v 20150904
OFFICE OF CHEMICAL SAFETY
AND POLLUTION PREVENTION
The Agency is in receipt of your Application for Pesticide Notification under Pesticide 
Registration Notice (PRN) 98-10 for the above referenced product. The Registration Division 
(RD) has conducted a review of this request for its applicability under PRN 98-10 and finds that 
the action requested falls within the scope of PRN 98-10. The label submitted with the 
application has been stamped “Notification” and will be placed in our records.
Reuben Baris, Product Manager 25 
Herbicide Branch
Registration Division (7505P) 
Office of Pesticide Programs
Notification per PRN 98-10 — Format Revisions Due to Transfer of Registration 
Product Name: TREMOR NXT
EPA Registration Number: 33270-23
Application Date: August 17, 2017
Decision Number: 533165
Should you wish to add/retain a reference to the company’s website on your label, then please be 
aware that the website becomes labeling under the Federal Insecticide Fungicide and Rodenticide 
Act and is subject to review by the Agency. If the website is false or misleading, the product 
would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40 
CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In addition, 
regardless of whether a website is referenced on your product’s label, claims made on the 
website may not substantially differ from those claims approved through the registration process. 
Therefore, should the Agency find or if it is brought to our attention that a website contains false 
or misleading statements or claims substantially differing from the EPA approved registration, 
the website will be referred to the EPA’s Office of Enforcement and Compliance.
If you have any questions, please contact Maggie Rudick by phone at 703-347-0257, or via email 
at rudick.maggie@epa.gov.
Annelle Finstad
Winfield Solutions, LLC.
P.O. Box 64589 
St. Paul, MN 55164
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY 
WASHINGTON, DC 20460
w
A

Page 1
Group 45 HERB ICIDE
Contains 839 grams/liter or 7.0 pounds/gallon active ingredient
Not for Sale, Sale Into, D istribution and/or Us e in Nassau and Suffolk Count ies of N ew York State.
If on skin or clothing:
If swa llow ed:
If inhaled:
Active Ingredients:
acetochlor: 2 chloro 2 ’ methyl 6’ ethyl N 
-----ethoxymethylacetanilide..................
Other Ingredients:................................
Total.......................................................
(Base label): [Reformatting label to remove redundant information and to convert it to a label booklet 
rather than a two piece - base plus cover/shipping - container label. Previous “Base label” information 
(page 1 - 4) is redundant to information that appears within the previous “cover/shipping container” 
portion of the labeling (page 5 - 24).
Tremor NXT
HERB ICIDE
Avoid contact with skin, eyes, or clothing. Avoid breathing vapor or spray mist. Wash thoroughly 
with soap and water after handling.______________________________________________________
First Aid 
If in eyes:
For use only on field corn, production seed corn, silage corn, sweet corn, 
popcorn, Miscanthus and other non-food perennial bioenergy crops
Hold eye open and rinse slowly and gently with water for 15-20 minutes.
Remove contact lenses, if present, after the first 5 minutes, then continue 
rinsing eye. Call a poison control center or doctor for treatment advice. 
Take off contaminated clothing. Rinse skin immediately with plenty of water 
for 15-20 minutes. Sensitized persons should avoid further contact and reuse 
of contaminated clothing. Call a poison control center or doctor for treatment 
advice.
Call a poison control center or doctor immediately for treatment advice. Have 
person sip a glass of water if able to swallow. Do not induce vomiting unless 
told to do so by a poison control center or doctor. Do not give anything by 
mouth to an unconscious persoftr___________________________________
Move person to fresh air. If person is not breathing, call 911 or an 
ambulance, then give artificial respiration, preferably by mouth-to-mouth if 
possible. Call a poison control center or doctor for further treatment advice.
Have the product container or label with you when calling a poison control center or doctor, or going for
—Precautionary Statements
—Hazards to Humans and Domestic Animals
Caus es Substantial but Temporary Eye and Skin Irritation • Harmful If Sw allow ed or Inhaled • May 
Caus e Allergic Skin R eaction
Keep Out of Reach of Children
WARN ING ------AVISO
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en details. (If you do 
not understand the label, find someorie to explain it to you in detail.)
NOTIFICATION
33270-23 
■|'hf applicant h-a;® certified thainc* 
changes, either than ttrnsc rcpcirtcd to 
the Anenc" b-ave been made tci the 
labeling. The .Agency ackncwicdgc! 
thss nc^icificaiicin by Lensr dated! 
02/08/2018
. 75.9%
.24.1%
100.0%

Page 2
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements 
listed in the Worker Protection Standard (WPS) for agricultural pesticides [dO CFR 17Q.2'1Q(d)('1-6)], the 
handler PPE requirements may be reduced or modified as specified in the WPS.
Aoetochlor has properties that may result in surface water contamination via dissolved runoff and runoff 
erosion. Practices should be followed to minimize the potential for dissolved runoff and/or runoff erosion.
This chemical demonstrates the properties and characteristics associated with chemicals detected in 
groundwater. The use of this chemical in areas where soils are permeable, particularly where the 
groundwater is shallow, may result in groundwater contamination.
D iscard clothing and other absorbent materials that have been drenched or heavily contaminated with this 
product's oonoentrate. Do not reuse them. Follow manufacturer's instructions for oleaning/maintaining 
PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE 
separately from other laundry.
Applicators and other handlers must w ear:
•—Coveralls over short sleeved shirt and short pants
•—Chemioal resistant gloves made of any waterproof material such as polyethylene or polyvinyl chloride 
•—Chemioal resistant footwear plus socks
•—Protective eyewear
•—Chemioal resistant headgear for overhead exposure
•—Chemical-resistant apron when cleaning equipment, mixing, or loading
—Environmental Hazards
This product is toxic to fish. Do not apply directly to water, or to areas where surface water is present or 
to intertidal areas below the mean high water mark. Do not contaminate water when disposing of 
equipment washwaters.
—User Safety Recommendations
U sers should:
• W ash hands before eating, drinking, chewing gum, using tobacco or using the toilet.
• Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean
clothing.
• Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As
soon as possible, wash thoroughly and change into clean clothing.
treatment. For information on this product, contact the National P esticide Information Center, 1-800-858-
7378, Monday-Friday, 7:30 AM-3:30 PM PST. You may also contact the National Poison Control Center, 
1-800-222 -1222, day or night, for emergency medical treatment________________________________
—P ersonal Protective Equipment (PPE)
Some of the materials that are chemical-resistant to this product are listed below. If you want more 
options, follow the instructions for Category A on an EPA chemical resistance category selection chart.
Nonrefillable containers 5 gallons or less:________________________________________________
—Storage and D isposal
Do not contaminate water, food, or feed by storage or disposal.
P esticide Storage: Store in original container only. Keep container closed when not in use. Do not store 
near food or feed. In case of spill or leak on floor or paved surfaces, soak up with vermiculite, earth, or 
synthetic absorbent.

Page 3
P esticide D isposal: P estioide wastes are toxic. Improper disposal of excess pesticide, spray mixture, or 
rinsate is a violation of F ederal law. If these wastes cannot be disposed of by use according to label 
instructions, contact your State P estioide or Environmental Control Agency or the Hazardous Waste 
Representative at the nearest EPA Regional Office for guidance.
Container H andling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if 
available, or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures 
allowed by state and local authorities.
Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows: 
Empty the remaining contents into application equipnient or a mix tank and drain for 10 seconds after the 
flow begins to drip. F ill the container l/d full with water and recap. Shake for 10 seconds. Pour rinsate 
into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds 
after the flow begins to drip. Repeat this procedure two more times. Pressure rinse as follows: Empty 
the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after 
the flow begins to drip. Hold container upside down over application equipment or mix tank or collect 
rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at 
about dO psi for at least 30 seconds. Drain for 10 seconds after the flow begins to drip.
Refillable containers larger than 6 gallons:________________________________________________
—Storage and D isposal
Do not contaminate water, food, or feed by storage or disposal.
P esticide Storage: Store in original container only. Keep container closed when not in use. Do not store 
near food or feed. In case of spill or leak on floor or paved surfaces, soak up with vermiculite, earth, or 
synthetic absorbent.
P esticide D isposal: P esticide wastes are toxic. Improper disposal of excess pesticide, spray mixture, or 
rinsate is a violation of F ederal law. If these wastes cannot be disposed of by use according to label 
instructions, contact your State P esticide or Environmental Control Agency or the H azardous W aste 
Representative at the nearest EPA Regional Office for guidance.
Container H andling: Refillable container. Refill this container with pestioide only. Do not reuse this 
container for any other purpose.
Cleaning the container before final disposal is the responsibility of the person disposing of the container. 
Cleaning before refilling is the responsibility of the refiller. To clean the container before final disposal, 
empty the remaining contents from this container into application equipment or mix tank. F ill the 
container about 10% full with water. Agitate vigorously or recirculate water with the pump for two 
minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this 
rinsing procedure two more times.
Nonrefillable containers larger than 5 gallons?_____________________________________________
—Storage and D isposal
Do not contaminate water, food, or feed by storage or disposal.
P esticide Storage: Store in original container only. Keep container closed when not in use. Do not store 
near food or feed. In case of spill or leak on floor or paved surfaces, soak up with vermiculite, earth, or 
synthetic absorbent.
P esticide D isposal: P estioide wastes are toxic. Improper disposal of excess pestioide, spray mixture, or 
rinsate is a violation of F ederal law. If these wastes cannot be disposed of by use according to label 
instructions, contact your State P estioide or Environmental Control Agency or the H azardous W aste 
Representative at the nearest EPA Regional Office for guidance.
Container H andling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if 
available, or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures 
allowed by state and local authorities.
Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows: 
Empty the remaining contents into application equipment or a mix tank. F ill the container 1/d full with 
water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least 
one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several 
times. Turn the container over onto its other end and tip it back and forth several times. Empty the 
rinsate into application equipment or a mix tan or store rinsate for later use or disposal. Repeat this

Page 4
R efer to label book let for D irections for Us e.
Agricultural Chemical: Do not ship or store with food, feeds, drugs or clothing.
EPA Reg. No. 33270 -XX EPA E st. 
NET CONTENTS
procedure two more times. Pressure rinse as follows: Empty the remaining contents into application 
equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container 
upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert 
pressure rinsing nozzle in the side of the container, and rinse at about dO psi for at least 30 seconds.
Drain for 10 seconds after the flow begins to drip^
Notice: R ead the entire label. Us e only according to label directions. B efore using this product, 
read W arranty Disclaim er, Inherent R isks of Us e and L im itation of R em edies at end of label 
book let. If terms are not acceptable, return at once unop ened.
— Agricultural Us e R equirem ents
Use this product only in accordance with its labeling and with the Worker Protection Standard, dO CFR 
part 170. Refer to the label booklet under "Agricultural Use Requirements" in the D irections for Use 
section for information about this standard.
Produced for 
Un ited Supp liers, Inc 
30d73 260**^ Street 
Eldora, lA 50627

Page 5
(cover/shipping container)
Group 15 HERBICIDE
Tremor NXT
HERBICIDE
Group HERB IC IDE
Contains 839 grams/liter or 7.0 pounds/gallon active ingredient
If on skin or clothing:
If swallowed:
If inhaled:
Agricultural Us e R equirem ents
Use this product only in accordance with its labeling and with the Worker Protection Standard, dO CFR 
part 170. Refer to the label booklet under "Agricultural Use Requirements" in the D irections for Use 
section for information about this standafdrfRedundant. Referral not needed.]
Active Ingredients:
acetochlor; 2-chloro-2'-methyl-6’-ethyl-N-ethoxymethylacetaniiide .... 
Other Ingredients: 
Total
75.9%
24.1%
100.0%
Not for Sale, Sale Into, Distribution and/or Use in Nassau and 
Suffolk Counties of New York State.
• Hold eye open and rinse slowly and gently with water for 15-20 minutes. 
•Remove contact lenses, if present, after the first 5 minutes, then continue
rinsing eye. 
•Call a poison control center or doctor for treatment advice.____________
•Take off contaminated clothing.
• Rinse skin immediately with plenty of water for 15-20 minutes. 
•Sensitized persons should avoid further contact and reuse of
contaminated clothing.
•Call a poison control center or doctor for treatment advice.____________
•Call a poison control center or doctor immediately for treatment advice.
• Have person sip a glass of water if able to swallow.
•Do not induce vomiting unless told to do so by a poison control center or 
doctor.
•Do not give anything by mouth to an unconscious person.____________
•Move person to fresh air.
• If person is not breathing, call 911 or an ambulance, then give artificial
4£
[Moved to upper right of panel]
For use only on field corn, production seed corn, silage corn, sweet corn, 
popcorn, Miscanthus and other non-food perennial bioenergy crops
[First Aid statements moved here from below.] 
FIRST AID
If in eyes:
Keep Out of Reach of Children
WARNING AVISO
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do 
not understand the label, find someone to explain it to you in detail.)

Page 6
EPA Reg. No. 33270-23 EPA Est. 
NET CONTENTS 
1/0817/7
(P age 1 through end):
If on skin or clothing:
If swa llow ed:
Avoid contact with skin, eyes, or clothing. Avoid breathing vapor or spray mist. Wash thoroughly 
with soap and water after handling.
WARNING. Causes Substantial but Temporary Eye and Skin Irritation • Harmful If Swallowed or 
Inhaled • May Cause Allergic Skin Reaction
Refer to inside of label booklet for D irections for Use. SEE BOOKLET FOR ADDITIONAL 
PRECAUTIONARY STATEMENTS, COMPLETE DIRECTIONS FOR USE, WARRANTY DISCLAIMER 
AND LIMITATION OF LIABILITY.
Notice: Read the entire label. Use only according to label directions. Before using this product, 
read Warranty D isclaimer, Inherent Risks of Use and Limitation of Remedies at end of label 
booklet.—If terms are not acceptable, return at once unopened. [The first two sentences are not 
required label elements and are redundant to the misuse statement. Winfield Solutions’ Warranty 
Statement information covers the third and fourth sentence.]
[First Aid statements moved to first page/front panel of booklet.] 
First Aid
If in eyes:
Agricultural Chemical: Do not ship or store with food, feeds, drugs or clothing. [Storage and handling 
information is presented in other label sections.]
respiration, preferably by mouth-to-mouth if possible. 
______________________•Call a poison control center or doctor for further treatment advice.______ 
Have the product container or label with you when calling a poison control center or doctor, or going for 
treatment. You may also contact 1-800-992 -5994 1-877-424-7452 for emergency medical treatment 
information
Hold eye open and rinse slowly and gently with water for 15 20 minutes. 
Remove contact lenses, if present, after the first 5 minutes, then continue 
rinsing eye. Call a poison control center or doctor for treatment advice._____
Take off contaminated clothing. Rinse skin immediately with plenty of water 
for 15-20 minutes. Sensitized persons should avoid further contact and reuse 
of contaminated clothing. Call a poison control center or doctor for treatment 
advice.
Call a poison control center or doctor immediately for treatment advice. Have 
person sip a glass of water if able to swallow. Do not induce vomiting unless 
told to do so by a poison control center or doctor. Do not give anything by
Produced for Manufactured By:
Un ited Supp liers, Inc. Winfield Solutions, LLC
30473 260**^ Street
Eldora, lA 50627
Precautionary Statements
Hazards to Humans and Domestic Animals
WARN ING
P.O. Box 64589 
St. Paul, MN 55164-0589

Page 7
If inhaled:
Acetochlor has properties that may result in surface water contamination via dissolved runoff and runoff 
erosion. Practices should be followed to minimize the potential for dissolved runoff and/or runoff erosion.
When handlers use closed systems or enclosed cabs in a manner that meets the requirements listed in 
the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-6)], the handler 
PPE requirements may be reduced or modified as specified in the WPS.
Applicators and other handlers must wear:
• Coveralls over short-sleeved shirt and short pants
• Chemical-resistant gloves made of any waterproof material such as polyethylene or polyvinyl chloride
• Chemical-resistant footwear plus socks
• Protective eyewear
• Chemical-resistant headgear for overhead exposure
• Chemical-resistant apron when cleaning equipment, mixing, or loading
Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this 
product's concentrate. Do not reuse them. Follow manufacturer's instructions for cleaning/maintaining 
PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE 
separately from other laundry.
User Safety Recommendations
Users should;
• Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet.
• Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean
clothing.
• Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As
soon as possible, wash thoroughly and change into clean clothing.
Environmental Hazards
This product is toxic to fish. Do not apply directly to water, or to areas where surface water is present or 
to intertidal areas below the mean high water mark. Do not contaminate water when disposing of 
equipment washwaters.
This chemical demonstrates the properties and characteristics associated with chemicals detected in 
groundwater. The use of this chemical in areas where soils are permeable, particularly where the 
groundwater is shallow, may result in groundwater contamination.
Personal Protective Equipment (PPE)
Some of the materials that are chemical-resistant to this product are listed below. If you want more 
options, follow the instructions for Category A on an EPA chemical-resistance category selection chart.
mouth to an unconscious persoRr_________________________________
Move person to fresh air. If person is not breathing, call 911 or an 
ambulance, then give artificial respiration, preferably by mouth to mouth if 
possible. Call a poison control center or doctor for further treatment advice. 
H ave the product container or label with you when calling a poison control center or doctor, or going for 
treatment. For information on this product, oontaot the National P esticide Information Center, 1 800 858 7378, 
Monday Friday, 7:30 AM 3:30 PM PST. You may also contact the National Poison Control Center, 1 800 222 1222 
day or night, for emergency medical treatment 
___________________________Directions for Use_________________
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
Read all Directions for Use carefully before applying.

Page 8
Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours. 
Exception: If the product is soil-injected or soil-incorporated, the Worker Protection Standard, under 
certain circumstances, allows workers to enter the treated area if there will be no contact with anything 
that has been treated.
Nonrefillable containers 5 gallons or less:
Container H andling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if 
available, or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures 
allowed by state and local authorities.
Do not apply this product in a way that will contact workers or other persons, either directly or through 
drift. Only protected handlers may be in the area during application. For any requirements specific to 
your State or Tribe, consult the agency responsible for pesticide regulation.
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and 
that involves contact with anything that has been treated, such as plants, soil, or water, is:
• Coveralls over short-sleeved shirt and short pants
• Chemical-resistant gloves made of any waterproof material
• Chemical-resistant footwear plus socks
• Protective eyewear
• Chemical-resistant headgear for overhead exposure
Do not contaminate water, food, or feed by storage or disposal.
P esticide Storage: Store in original container only. Keep container closed when not in use. Do not store 
near food or feed. In case of spill or leak on floor or paved surfaces, soak up with vermiculite, earth, or 
synthetic absorbent.
P esticide D isposal: P esticide wastes are toxic. Improper disposal of excess pesticide, spray mixture, or 
rinsate is a violation of F ederal law. If these wastes cannot be disposed of by use according to label 
instructions, contact your State P esticide or Environmental Control Agency or the H azardous W aste 
Representative at the nearest EPA Regional Office for guidance.
Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows: 
Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the 
flow begins to drip. F ill the container l/d full with water and recap. Shake for 10 seconds. Pour rinsate 
into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds 
after the flow begins to drip. Repeat this procedure two more times. Pressure rinse as follows: Empty 
the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after 
the flow begins to drip. Hold container upside down over application equipment or mix tank or collect 
rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at 
about 40 psi for at least 30 seconds. Drain for 10 seconds after the flow begins to drip.
Agricultural Use Requirements
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR 
part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, 
nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, 
decontamination, notification, and emergency assistance. It also contains specific instructions and 
exceptions pertaining to the statements on this label about personal protective equipment (PPE), and 
restricted-entry interval. The requirements in this box only apply to uses of this product that are covered 
by the Worker Protection Standard.
[Storage and Disposal statements moved to end of Directions for Use] 
STORAGE AND D ISPOSAL

Page 9
Product Information
Use Restrictions
R efillable containers larger than 6 gallons:
Container H andling: Refillable container. Refill this container with pesticide only. Do not reuse this 
container for any other purpose.
Cleaning the container before final disposal is the responsibility of the person disposing of the container. 
Cleaning before refilling is the responsibility of the refiller. To clean the container before final disposal, 
empty the remaining contents from this container into application equipment or mix tank. F ill the 
container about 10% full with water. Agitate vigorously or recirculate water with the pump for two 
minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this 
rinsing procedure two more times.
Tremor NXT herbicide is for preplant, preemergence, or early postemergence use in corn and for weed 
control in Miscanthus and other non-food perennial bioenergy crops. Use of this product in corn is limited 
to field com, production seed corn, silage corn, sweet corn, popcorn. Do not apply this product to any 
crop other than corn or for weed control in Miscanthus or other non-food perennial bioenergy crops.
• On the following soil types, do not apply this product within 50 feet of any well where the depth to 
groundwater is 30 feet or less; sands with less than 3% organic matter; loamy sands with less than 2% 
organic matter; or sandy loams with less than 1 percent organic matter. See the figure for additional 
clarification.
Nonrefillable containers larger than 5 gallons:
Container H andling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if 
available, or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures 
allowed by state and local authorities.
Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows; 
Empty the remaining contents into application equipment or a mix tank. F ill the container 1/d full with 
water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least 
one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several 
times. Turn the container over onto its other end and tip it back and forth several times. Empty the 
rinsate into application equipment or a mix tan or store rinsate for later use or disposal. Repeat this 
procedure two more times. Pressure rinse as follows; Empty the remaining contents into application 
equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container 
upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert 
pressure rinsing nozzle in the side of the container, and rinse at about dO psi for at least 30 seconds.
Drain for 10 seconds after the flow begins to drip^
• This chemical demonstrates the properties and characteristics associated with chemicals detected in 
ground water. The use of this chemical in areas where soils are permeable, particularly where the 
ground water is shallow, may result in ground water contamination.
• Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk Counties of New York 
State.
Tremor NXT may be applied to the surface or incorporated into the top 1 to 2 inch layer of soil. It is 
specified for control alone, or in tank mix combinations as indicated, for the weeds listed in the Target 
Weeds section of these use directions. Tremor NXT controls weeds by interfering with normal 
germination and seedling development. Tremor NXT will not control emerged weeds present at 
application.

Page 10
50 foot setback
<well >
■* water table
Hestriction does not apply for areas 
more than 50 feet Irom a well.
• Do not apply this product using aerial application equipment, unless otherwise directed by approved 
supplemental labeling in possession of the user at the time of application.
• Chemigation: Do not apply this product through any type of irrigation system, unless otherwise 
directed by approved supplemental labeling in the possession of the user at the time of application.
• Do not use flood irrigation to apply or incorporate this product.
• This product must not be mixed or loaded within 50 feet of any wells including abandoned wells and 
drainage wells, sink holes, perennial or intermittent streams and rivers, and natural or impounded lakes 
and reservoirs. This setback does not apply to properly capped or plugged abandoned wells and does 
not apply to impervious pad or properly diked mixing/loading areas.
• Operations that involve mixing, loading, rinsing, or washing of this product into or from pesticide 
handling or application equipment or containers within 50 feet of any well are prohibited unless 
conducted on an impervious pad constructed to withstand the weight of the heaviest load that may be 
positioned on or moved across the pad. Such a pad shall be designed and maintained to contain any 
product spills or equipment leaks, container or equipment rinse or washwater, and rainwater that may 
fall on the pad. Surface water shall not be allowed to either flow over or from the pad, which means the 
pad must be self-contained. The pad shall be sloped to facilitate material removal. An unroofed pad 
shall be of sufficient capacity to contain at a minimum 110% of the capacity of the largest pesticide 
container or application equipment on the pad. A pad that is covered by a roof of sufficient size to 
completely exclude precipitation from contact with the pad shall have a minimum containment capacity 
of 100% of the capacity of the largest pesticide container or application equipment on the pad. 
Containment capacities as described above shall be maintained at all times. The above specified 
minimum containment capacities do not apply to vehicles when delivering pesticide shipments to the
The acetochlor soil restriction Is as follows:
On the fol lowing soil types, do notapols acetochlor within 
50 feet ol any well where the depth to ground water is
30 feet or less:
* sands with less than 3 percent organic matter;
* loarry sands with lea than 2 percent organic matter; or
* sandy loams with less than 1 percent organic matter.
Restriction does not 
apply if grcLird water 
is mo re than 30teet 
below land surface.
rw
U
land serlacp

Page 11
Rotational Crop Restrictions:
When tank mixing with other herbicides, follow the most restrictive crop rotation guidelines on the label of 
each product used. The following rotational crops may be planted as indicated:
Spring/next season following 
application
• Maximum Acetochlor Application Rates Per Calendar Year:
Maximum annual acetochlor broadcast application rates for corn must not exceed 3.0 pounds active 
ingredient (3.4 pints Tremor NXT) per acre. Note: One pint per acre Tremor NXT delivers 0.875 pound 
active ingredient acetochlor per acre.
Timing or Interval________
Immediately - 0 months after 
application______________
4 months after application 
9 months after application
Rotational Crop_____________________________
Field corn, seed corn, silage corn, popcorn, sweet 
corn, milo (sorghum) (1)_______
Wheat______________________________________
Nongrass animal feeds such as alfalfa, clover, kudzu, 
lespedeza, lupin, sanfoin, trefoil, and Vetch spp._____
Soybeans, corn (all types), cotton, milo (sorghum), 
tobacco, sugar beets, sunflowers, potatoes, barley, 
buckwheat, millet (pearl and proso), oats, rye, 
teonsinte triticale, wild rice, dried shelled bean group 
Lupinus spp. (including grain lupin, sweet lupin, and 
white lupin); Phaseolus spp. (includes.field bean, 
kidney bean, lima bean (dry), navy bean, pinto bean, 
tepary bean, bean); Vigna spp.(includes adzuki bean, 
blackeyed pea, catjang, cowpea, Crowder pea, moth 
bean, mung bean, rice bean, southern pea, and urd 
bean); broad bean (dry) chickpea, guar, lablab bean, 
lentil, pea {Pisum spp., includes field pea); pigeon pea
mixing/loading site. States may have in effect additional requirements regarding wellhead setbacks and 
operational containment.
• Product must be used in a manner that will prevent back siphoning in wells, spills or improper disposal 
of excess pesticide, spray mixtures or rinsates.
• Do not apply under conditions that favor runoff or wind erosion of soil containing this product to non­
target areas. To prevent off-site movement due to runoff or wind erosion:
- Avoid treating powdery dry or light sandy soils when conditions are favorable for wind erosion. Under 
these conditions, the soil surface must first be settled by rainfall or irrigation.
- Do not apply to impervious substrates such as paved or highly compacted surfaces or frozen or snow 
covered soils.
- Do not use tailwater from the first flood or furrow irrigation of treated fields to treat non-target crops 
unless at least 1/2 inch of rainfall has occurred between application and the first irrigation.
• Do not apply when wind conditions favor drift to non-target sites. To minimize spray drift to non-target 
areas:
- Use low pressure application equipment capable of producing a large droplet spray.
- Do not use nozzles that produce a fine droplet spray.
- Minimize drift by using sufficient spray volume to ensure adequate coverage with large droplet size 
sprays.
- Keep ground-driven spray boom as low as possible above the target surface.
- Make application when the wind velocity favors on-target product deposition (approximately 3 to 10 
mph). Do not apply when wind velocity exceeds 15 mph. Avoid application when gusts approach 15 
mph.
- Low humidity and high temperatures increase the likelihood of spray drift to sensitive areas. Avoid 
spraying during conditions of low humidity and/or high temperatures. Do not apply during inversion 
conditions.
• Do not apply Tremor NXT to sweet corn as an early postemergence application.

Page 12
Number within parentheses (-) in the table refers to specific rotational crop requirements below;
1.
2.
3.
4.
Best Management Practices
Proactively implementing diversified weed control strategies to minimize selection for weed populations 
resistant to one or more herbicides is recommended. A diversified weed management program may 
include the use of multiple herbicides with different modes of action and overlapping weed spectrum with 
or without tillage operations and/or other cultural practices. Research has demonstrated that using full 
labeled rates and following directions for use is important to delay the selection for resistance. Scouting 
after a herbicide application is important because it can facilitate the early identification of weed shifts 
and/or weed resistance and thus provide direction on future weed management practices. One of the 
best ways to contain resistant populations is to implement measures to avoid allowing weeds to 
reproduce by seed or to proliferate vegetatively. Cleaning equipment between sites and avoiding 
movement of plant material between sites will greatly aid in retarding the spread of resistant weed seed.
(1) If crop treated with Tremor NXT is lost, field corn, seed corn, silage corn, popcorn, sweet corn, or milo 
(sorghum) may be replanted immediately. When replanting milo (sorghum) immediately, only use 
seed properly treated with seed protectant or safener; otherwise, rotation to milo (sorghum) may 
occur in Spring/next season. Do not exceed a total of 3.0 pounds per acre of active ingredient (3.4 
pints Tremor NXT), if additional product is applied.
General principles of herbicide resistance management
Apply integrated weed management practices. Use multiple herbicide modes-of-action with 
overlapping weed spectrums in rotation, sequences, or mixtures.
Use the full recommended herbicide rate and proper application timing for the hardest to control 
weed species present in the field.
Scout fields after herbicide application to ensure control has been achieved. Avoid allowing 
weeds to reproduce by seed or to proliferate vegetatively.
Monitor site and clean equipment between sites.
Rotation to Non-food Winter Cover Crops
Following harvest of food crops treated with Tremor NXT, only non-food or non-feed winter cover crops 
(with the exception of wheat) may be planted. Do not graze or harvest rotational cover crops for food or 
animal feed for 18 months following the last application of Tremor NXT. This prohibition does not apply to 
wheat, which may be planted 4 months following the last application of Tremor NXT, or to nongrass 
animal feeds, which may be planted 9 months after the last application of Tremor NXT.
For annual cropping situations also consider the following:
• Start with a clean field and control weeds early by using a burndown treatment or tillage in 
combination with a preemergence residual herbicide as appropriate.
• Use cultural practices such as cultivation and crop rotation, where appropriate.
• Use good agronomic principles that enhance crop competitiveness
• Use new commercial seed that is as free of weed seed as possible.
Weed Resistance Management Guidelines
Acetochlor, the active ingredient in this product, is a Group 15 herbicide based on the mode of action 
classification system of the Weed Science Society of America. Any weed population can contain plants 
naturally resistant to Group 15 herbicides. Such resistant weed plants may not be effectively managed 
using Group 15 herbicides but may be effectively managed utilizing another herbicide from a different 
Group and/or by using cultural or mechanical practices. However, any herbicide mode of action 
classification by itself may not adequately address specific weeds that are resistant to specific herbicides. 
Consult your United Suppliers, Inc. Winfield Solutions, LLC representative, state cooperative extension 
service, professional consultants, or other qualified authorities to determine appropriate actions for 
treating specific resistant weeds.

Page 13
Application Directions - Corn
Used Alone: If Tremor NXT is used alone, add the specified amount to the spray tank before the tank is 
half filled, then add the rest of the water or fluid fertilizer. Provide sufficient agitation to ensure thorough 
mixing and to maintain a uniform spray mixture during application.
Tank Mixed: If a tank mixture is used, it is recommended that a small-scale test of compatibility be done 
before actual tank mixing. See Appendix I for details on the procedure for such a test.
Report any incidence of repeated non-performance of this product on a particular weed to your 
Un ited Supp liers, Inc. Winfield Solutions, LLC representative, local retailer, or county extension 
agent.
Dry Bulk Fertilizer: Tremor NXT may be impregnated on dry bulk fertilizer and applied as the fertilizer is 
spread. Use at least 200 lb of dry bulk fertilizer per acre. See Appendix II for more details including 
which fertilizers are compatible.
Water Carrier
Allow time for complete dispersion/mixing before adding another product to the spray mixture. Add 
products to the tank mixture in the following order:
• To start, add one-half of the required amount of water to the spray tank. Begin agitation.
• Products in water soluble packaging. Important: Allow time for complete dispersion.
• Wettable powders or dry flowables (slurry if specified by tank mix product label)
• Liquid flowables
• Tremor NXT or other emulsifiable concentrates
• Suspension concentrates
• Urea ammonium nitrate (UAN) or ammonium sulphate (AMS), if required
• Compatibility agent if needed
• Soluble liquids such as glyphosate, paraquat, 2,4-D amine
• Crop oil concentrate (COC) or nonionic surfactant (NIS), if required
• Finish filling spray tank to required spray volume
Apply in a minimum broadcast spray volume of 10 gallons per acre using boom equipment for ground 
applications. Use low pressure nozzles designed for application of herbicides. Use sufficient operating 
pressure to produce the desired spray pattern for the nozzle (15 to 40 psi) and follow manufacturer’s 
instructions for nozzle spacing and operating height to ensure uniform spray distribution at the soil 
surface. Use 50-mesh or coarser screens, if needed.
Carriers and Spray Volume
Liquids: Either water or liquid fertilizers such as solutions, slurries, or suspensions may be used as liquid 
carriers. If fluid fertilizers are used, a physical compatibility test with these must be done before 
combining in the spray tank. See Appendix I for details of the compatibility testing procedure. Even if 
Tremor NXT is physically compatible with a fluid fertilizer, constant agitation is necessary to maintain a 
uniform mixture during application.
Adding to Spray Tank
The spray tank must be clean, thoroughly rinsed, and decontaminated before adding either Tremor NXT 
alone or in tank mix combinations. If water is used as the carrier, use clean water. All return lines to the 
spray tank must discharge below the liquid level.

Page 14
Application Timing and Methods
Note: For all tank mixtures, maintain agitation during mixing and throughout application to ensure spray 
mixture remains uniformly suspended.
Postplant-Preemergence: Tremor NXT may be applied after planting but prior to com emergence, if 
rain or sprinkler irrigation does not occur within 7 days after application, weed control may be improved by
Preplant Incorporation: Tremor NXT and certain tank mixes may be mechanically incorporated into the 
top 2 inches of the soil with field cultivators, discs, or spring tooth harrows any time up to 14 days prior to 
planting. Improper incorporation, excessive crop residues, or poor soil tilth may result in erratic, streaked, 
or otherwise unsatisfactory weed control. Do not mix Tremor NXT deeper than 2 inches into the soil and 
avoid moving or shaping soil after incorporation, as weed control may be reduced.
Liquid Fertilizer Carrier
Allow time for complete dispersion/mixing before adding another product to the spray mixture. Add 
products to the tank mixture in the following order:
• To start, add one-half of the required amount of liquid fertilizer to the spray tank. Begin agitation.
• Compatibility agent if needed
• Products in water soluble packaging. Important: Products in water soluble packaging must be premixed 
with water (slurried) prior to addition to the spray tank.
• Wettable powders or dry flowables (slurry if specified by tank mix product label)
• Liquid flowables
• Tremor NXT or other emulsifiable concentrates
• Suspension concentrates
• Ammonium sulphate (AMS), if tank mixing with glyphosate.
• Soluble liquids such as glyphosate, paraquat, or 2,4-D amine
• Crop oil concentrate (COC) or nonionic surfactant (NIS), if required
• Finish filling spray tank to required spray volume.
Preemergence Surface: Tremor NXT and certain tank mixes may be applied to the soil surface as a 
broadcast or banded application. Precipitation or sprinkler irrigation of at least 0.25 inch is required to 
bring Tremor NXT into contact with germinating seeds. If rain or sprinkler irrigation does not occur within 
7 days after application, weed control may be improved by using a rotary hoe or similar equipment to 
incorporate the herbicide. Incorporation equipment should be run at a shallow depth to avoid disturbance 
of germinating corn seed. Erratic weed control resulting from exposure of untreated soil may occur if 
surface soil is moved or reshaped after incorporation.
For the optimum period of effective weed control during the time most critical to corn production, preplant 
application of Tremor NXT herbicide should occur as close as possible to planting. Preemergence 
applications should occur as close as possible to planting, but prior to weed emergence; this product will 
not control emerged weeds present at application. Postemergence applications should occur prior to 
weed emergence or in tank mix combination with a product that controls emerged weeds. Note: Do not 
apply Tremor NXT to sweet corn as an early postemergence application.
Early Preplant Surface: On medium and fine textured soils (see Table 1) Tremor NXT and certain tank 
mixtures may be applied up to 45 days before planting field com or silage com. Split applications can be 
made 30 to 45 days prior to planting with 60 percent of the specified broadcast rate applied initially and 
the remaining 40 percent applied at planting. Applications made less than 30 days prior to planting can 
be made either as a split or as a single application. If weeds are present at the time of application, apply 
this product in a tank mixture with an appropriate contact herbicide. Observe directions for use, 
precautions, and restrictions on the label of the contact herbicide. During the planting operation, be 
careful not to move untreated soil to the surface or move treated soil out of the row, as weed control may 
be reduced.

Page 15
Cultivation
Ground may be tilled before or after application. Do not exceed 2-inch incorporation depth if tilled after 
application.
Early Postemergence: Tremor NXT may be applied early postemergence to corn up to 11 inches tall. 
Application must be made prior to weed seedling emergence or in a tank mixture with a herbicide that 
controls the emerged weeds. Read and follow restrictions and directions on tank mix product labels. 
DO NOT apply postemergence to sweet corn.
DO NOT make postemergence applications using sprayable liquid fertilizer as the carrier because severe 
crop injury may occur.
Fall Application - For use only in Iowa, Minnesota, North Dakota, South Dakota, Wisconsin, north 
of Route 91 in Nebraska, and north of Route 136 in Illinois. Following soybean harvest, apply to 
soybean stubble after September 30, when the sustained soil temperature at 4-inch depth is less than 
55°F, but before ground freezes. Use on medium- and fine-textured soils with greater than 2.5% organic 
matter. Only corn may be planted the following spring.
Cultivation should be delayed as long as possible. If weeds emerge, a shallow cultivation or rotary 
hoeing will generally result in improved weed control. If Tremor NXT was incorporated, cultivate to a 
depth of less than half the depth of incorporation.
If cultivation is necessary due to soil crusting or compaction, adjust equipment to run shallow and 
minimize soil movement. This will decrease the possibility of diluting or moving the herbicide from the 
weed control zone.
If a spring application is made, the total rate of the fall plus spring application must not exceed the 
maximum labeled rate for corn grown on that soil.
Sprinkler Irrigation: Do not apply Tremor NXT by sprinkler irrigation, unless otherwise directed by 
approved supplemental labeling in the possession of the user at the time of application. Use a sprinkler 
system to incorporate Tremor NXT after application. After Tremor NXT has been applied, a sprinkler 
irrigation system set to deliver 0.25 to 0.75 inch of water per acre may be used to incorporate the product. 
Using more than 0.75 inch of water could result in reduced performance. On sandy soil low in organic 
matter, use no more than 0.5 inch of water. Do not use flood irrigation to apply or incorporate Tremor 
NXT.
Banding-Preemergence: Tremor NXT may be applied in a 10- to 14-inch band after corn planting but 
prior to emergence. If rain or sprinkler irrigation does not occur within 7 days after application, weed 
control may be improved by shallow incorporation using a rotary hoe or similar equipment. Do not disturb 
the germinating corn seed. Erratic weed control resulting from exposure of untreated soil may occur if 
surface soil is moved or reshaped during incorporation.
Soil Texture and Organic Matter
The use rate of Tremor NXT is determined by a combination of two factors, soil texture and organic 
matter, which must be determined prior to application. Different soil textures are grouped into three 
textural classes (coarse, medium, and fine) as outlined in Table 1. Soil texture and organic matter 
content of the soil may be determined from soil survey information and/or by laboratory analysis and must 
be known in order to select the proper rate from Table 2.
using a rotary hoe or similar equipment to shallowly incorporate the herbicide. Incorporation equipment 
should be run at a shallow depth to prevent disturbance of the germinating corn. Erratic weed control 
resulting from exposure of untreated soil may occur if surface soil is moved or reshaped during 
incorporation.

Page 16
Coarse
Broadcast Rate Per Acre (Pints)*
*Use the higher rate in the rate range in areas of heavy weed infestation.
Sand
Loamy Sand
Sandy Loam
The following use rates are for preplant incorporated, preemergence, and early postemergence 
applications (see Application Timing and Methods). Consult Table 3 if reduced or no-till applications are 
made or application is made more than 14 days prior to planting under conventional tillage.
Tremor NXT may be used in reduced and no-till systems or as an early preplant application (more than 
14 days prior to planting) in conventional tillage systems. Single applications may occur up to 30 days 
before planting but prior to weed emergence; application on coarse soils should not be made more than 
14 days prior to planting. Optimal weed control will be obtained when applications are made as close as 
possible to planting but before weeds emerge. Split applications of Tremor NXT may be used; apply 
60% of the recommended rate prior to weed emergence and up to 45 days before planting and the 
remaining 40% at or immediately following planting but before crop emergence. If weeds are present at 
application, it is recommended that a burndown herbicide such as paraquat (Gramoxone), glyphosate 
(Durango DMA), or 2,4-D be tank mixed with Tremor NXT.
Broadcast Rate Per Acre (Pints)* 
Soil Organic Matter Content 
Less than 3%
Use Rates for Reduced Tillage Systems or Early Preplant Applications in 
Conventional Tillage Systems
1.25-1.75
1.75-2.25
1.75-2.25
1.50-2.00
2.25-2.75
2.75-3.00
Use Rates for Conventional Tillage Systems
Table 2: Use Rates for Tremor NXT by Soil Texture and Organic Matter Content in Conventional 
Tillage Systems.
Table 1: Soil Texture Groupings for Tremor NXT Use Rate Selection. 
_____ Medium
Loam
Silt Loam
Silt
Sandy Clay Loam
Table 3' Use Rates for Tremor NXT by Soil Texture in Reduced and No-Till Systems or 
Conventional Tillage Systems when Applications are made more than 14 days Prior to Planting.
_______Fine 
Silty Clay Loam 
Clay Loam 
Sandy Clay 
Silty Clay 
Clay
Soil Texture
Coarse
Medium
Fine
*Use the higher rate in the rate range in areas of heavy weed infestation.
**On soils with 6 to 10 percent organic matter, use 2.5 to 3.4 pints per acre. On soils with more than 10 
percent organic matter, use 3.4 pints per acre.
Soil 
Texture 
Coarse 
Medium 
Fine
3% or more** 
1.75 
1.75-2.25 
2.25-2.75

Page 17
Row width in inches
Row width in inches
Weeds Controlled
Table 4: Weeds Controlled or Partially Controlled by Tremor NXT at Specified Use Rates.
johnsongrass, seedling PC
C = Control 
PC = Partial 
Control 
C 
C 
C
PC
PC
c
PC
c 
c
c 
c 
c 
c 
c 
c 
c 
c 
c
C = Control 
PC = Partial 
Control
PC 
C 
C
PC 
c
PC 
PC 
c 
c 
c 
c 
c 
c 
c
PC
PC 
PC 
PC 
c 
c
Tremor NXT, applied as directed in this label, will provide control or partial control of the weeds listed in 
Table 4. Partially controlled weeds will be severely stunted, or experience reduced height, vigor, or 
population compared to untreated areas. Depending on the infestation level or density, a follow-up 
treatment with another registered herbicide may be needed to provide complete control.
Band Applications
This product may be applied as a band treatment. Use the following formulas below to determine the 
appropriate rate and volume per treated acre.
Broadcast rate = Band rate per 
per acre treated acre
Broadcast volume = Band volume 
per acre per treated
acre
Additional weeds may be controlled with tank mixes. See the Tank Mix Combinations section for 
specified tank mix combinations and additional weeds controlled.
cupgrass, prairie_________
cupgrass, southwestern 
cupgrass, woolly (1)______
foxtail, bristly____________
foxtail, giant_____________
foxtail, green____________
foxtail, robust (purple, white) 
foxtail, yellow 
goosegrass
Grasses and Sedges 
barnyardgrass______
crabgrass spp.______
crowfootgrass
millet, foxtail_______
millet, wild proso (2) 
nutsedge , yellow (3) 
oats, wild_________
panicum, browntop 
panicum, fall
Broadleaves___________
beggarweed, Florida_____
carpetweed_____________
galinsoga______________
groundcherry, cutleaf_____
hen bit_________________
jimsonweed____________
kochia_________________
lambsquarters, common (5) 
nightshade, black________
nightshade, hairy________
pigweed spp.___________
purslane, common_______
pusley, Florida__________
ragweed, common (5)
sida, prickly____________
smartweed spp._________
starbur, bristly__________
velvetleaf______________
waterhemp, common_____
waterhemp, tall
Band width in inches
------------------------- X
Band width in inches
------------------------- X

Page 18
1.
4.
5.
Tank Mix Combinations
2.
3.
For all applications, do not exceed the maximum rate of acetochlor as specified in the Maximum 
Acetochlor Application Rate Per Calendar Year section of this label.
When tank mixing Tremor NXT with atrazine, do not exceed the maximum allowable rate of 
atrazine in your county or state. In some atrazine management areas, atrazine is more restricted. 
Consult your county extension office or state university for further information.
PC
C
PC 
PC 
c 
c 
PC 
c
Tremor NXT may be tank mixed with any other herbicide labeled for use on corn provided the 
compatibility of the tank mix is verified by a jar test and tank mixing with Tremor NXT is not prohibited by 
the label of the tank mix product. The compatibility of a tank mixture can be determined by mixing the 
ingredients of the herbicide mixture in their relative proportions in a glass jar as described for fluid 
fertilizer mixtures in Appendix I by substituting water for fluid fertilizer. Refer to the label of the tank mix 
product for applicable use directions, precautions and limitations, including additional weeds controlled. 
Do not exceed application rates on the respective product labels. Do not tank mix with another pesticide 
product that contains the same active ingredient as this product unless the label of either tank mix partner 
specifies the maximum dosages that may be used.
Additional weeds may be controlled with tank mixes of Tremor NXT and other products labeled for use on 
field corn, production seed corn, silage corn, sweet corn and popcorn. Tank mix combinations may be 
used in conventional, reduced, or no-till systems and may be applied by the same methods and at the 
same application timing as Tremor NXT herbicide unless otherwise specified in the tank mix product 
label.
Use 3.0 to 3.4 pints per acre applied alone or in tank mixtures for best results. Control may be 
erratic, especially under dry conditions. Control escaped weeds with cultivation or application of a 
registered postemergence herbicide.
Use 3.0 to 3.4 pints per acre.
Use 2.5 to 3.4 pints per acre applied alone or in tank mixtures and apply preplant incorporated only 
for control on medium- and fine-textured soils.
Best control is achieved when Tremor NXT is applied within 5 days of planting and rainfall occurs 
shortly after application or mechanical incorporation is used to activate the herbicide. If it does not 
rain within 7 days of application, shallow cultivation will enhance activity. Excessive rainfall after 
application may reduce control. Under adverse weather conditions and/or heavy infestations, 
cultivation or application of a registered postemergence herbicide may be needed.
Use the higher rate in the application rate range.
Use of Spray Adjuvants
Tremor NXT is a preemergence herbicide for which spray adjuvants have little or no influence on 
performance. However, several herbicides used in tank mixtures with Tremor NXT require use of 
adjuvants to aid in the burndown of emerged weeds. Use only those adjuvants recommended on the 
label of the tank mix product and approved for use in growing crops. Surfactants and/or low rate liquid
panicum, Texas (4)_____
rice, red______________
sandbur, field_________
Shattercane (2)________
siqnalqrass, broadleaf (4) 
sprangletop, red_______
wheat, volunteer_______
witchgrass

Page 19
Preemergence Tank Mix Combinations
Hornet WDG
Balance Pro
Tremor NXT may be tank-mixed with Aim EC, atrazine, Balance Pro, Balance Flexx, Banvel, Callisto, 
Callistro Xtra, Clarity, Distinct, Durango DMA, Hornet WDG, Linex 4L, Lorox DF, Marksman, Princep, 
Python WDG, Resource, SureStart (do not exceed a total of 3.0 lbs ai acetochlor per acre per year), or 
2,4_D for preemergence use in corn. Ensure that specific product being used in the tank mixture is 
registered for preemergence application to corn. Read and follow label directions of all products in the 
tank mixture; the most restrictive label directions apply.
■t Formulations that are not listed may be used. Perform a compatibility test and check the label of the 
tank mix product label for application rates, applicable use directions, precautions and limitations.
fertilizers (28%, 30% or 32% UAN) or ammonium sulfate (AMS) adjuvants may be used with tank mixes 
applied preplant or preemergence to the crop.
_________________________Comments________________________
• May be applied preplant surface, preplant incorporated, preemergence, 
if emerged weeds are greater than 1,5 inches tall at the time of 
application, add an appropriate postemergence herbicide
• Provides control or partial control of cocklebur, giant ragweed, annual 
ground chemy, jimsonweed, kochia, morningglory spp., mustard spp., 
sicklepod, and velvetleaf
• Use in areas with heavy broadleaf weed pressure_________________
• Tank mix with 4-5 oz/acre of Hornet® WDG herbicide to provide 
consistent control of velvetleaf, lambsquarters, pigweed species, 
waterhemp and triazine resistant varieties of these species. Also
provides improved cx>ntrol of cocklebur, common ragweed, giant
ragweed, common sunflower and jimsonweed.____________________
• Provides improved crabgrass or fall panicum control._______________
• Tank mix with 0,8 - 1.33 oz/acre of Python® WDG herbicide to provide 
consistent control of velvetleaf, lambsquarters, pigweed species, 
waterhemp and triazine resistant varieties of these species.
Conventional Tillage (Tremor NXT Plus):
Tank Mix Herbicide^
Atrazine 4L
Reduced or No-Tillage Corn (Tremor NXT Pius): 
Tank Mix Herbicide *
Atrazine 4L
Banvel/Clarity 
Marksman 
Durango DMA,, 
Roundup
WeatherMax, 
Touchdown
Princep 4L 
Python WDG
________________________Comments_______________________
• Provides control or partial control of cocklebur, giant ragweed, annual 
ground chemy, jimsonweed, kochia, morningglory spp., mustard spp., 
sicklepod, and velvetleaf
• If emerged weeds are greater than 1,5 inches tall at the time of 
application, add an appropriate postemergence hert3icide
• Use in areas with heavy broadleaf weed pressure________________
• Not labeled in all states; refer to Balance Pro label for precautionary 
statements, directions for use, geographic and other use restrictions
• For use in field corn only
• Refer to use rate section for minimum use rates of Tremor NXT_____
• Apply preplant or preemergence in reduced/ no-till systems for
burndown of existing weeds_________________________________
• Apply preplant for burndown of existing weeds
• Weeds less than 6 inches tall are easiest to control with burndown 
herbicides applied in combination with Tremor NXT.
• Always add ammonium sulphate (AMS) to tank mixes prior to addition 
of glyphosate (8.5 to 17 lb per 100 gal of spray).

Page 20
Postemergence Tank Mixes (Tremor NXT Plus):
Distinct 4-6 oz/acre
When tank mixing, read and follow label use directions and precautions of the tank mix product and follow 
additional use directions in the following table;
Buctril
Buctril/atrazine 
Shotgun herbicide 
Atrazine
1,5 pt/acre
2 pt/acre 
2-3 pt/acre
0.5 - 2 lb ai/acre
Note: DO NOT use liquid fertilizer as the carrier when Tremor NXT is applied postemergence to corn as 
severe injury may result. The addition of liquid fertilizers used as adjuvants with Tremor NXT tank mixes 
applied postemergence to corn under environmental stress conditions may result in significant crop injury 
and should not be used if the risk of crop injury is unacceptable.
Rate
2-5 oz/acre 
0.5 oz/acre 
0.5 -1 pt/acre 
0.5 -1 pt/acre 
2 - 3.5 pt/acre
f Formulations that are not listed may be used. Perform a compatibility test and check the product label 
for application rates, applicable use directions, precautions and limitations.
• Control annuals, suppress perennials_________________________
• Preemergence to early postemergence to cx>rn up to 3 inches tall, but
before weeds are more than 1 inch tall.________________________
• Provides improved control of crabgrass and fall panicum__________
• Burndown existing weeds
Postemergence Tank Mix Combinations
Tremor NXT can be applied to corn up to 11 inches tall. Tremor NXT may be applied before, with, or 
following the use of one or more of the follovring herbicides for postemergence use in corn; Accent, 
Accent Gold, Aim EC, atrazine, Balance Flexx, Banvel, Basis, Basis Gold, Beacon, Bladex, Buctril, 
Buctril/atrazine, Callisto, Callistra Xtra, Capreno, Clarity, Distinct, Durango DMA, Halex GT, Hornet WDG, 
Impact, Laudis, Liberty, Lightning, Linex 4L, Lorox DF, Marksman, Peak, Permit, Princep, Provd, 
Pendimax, Pursuit, Resource, Shotgun, Spirit, Status,Steadfast, or 2,4-D. Refer to the label of the tank 
mix product for applicable directions for use, precautions and restrictions, and a list of weeds controlled. 
Tremor NXT may be tank mixed with any product approved for use on corn unless it is prohibited by the 
tank mix product label. Ensure that specific product being used in the tank mixture is registered for 
postemergence application to corn. Read and follow label directions of all products in the tank mixture; 
the most restrictive label directions apply.
• May be applied preplant surface, preplant 
incorporated, preemergence or early 
postemergence to corn up to 8 inches tall. If 
emerged weeds are greater than 1.5 inches tall 
at the time of application, add an appropriate 
postemergence hert>icide.
Note: The maximum atrazine application rate 
per year for corn is 2 lb active if applied only 
postemergence or 2.5 lb active if pre- and 
postemergence applications are made.______
• Always add a NIS at 0.25% v/v and 1.25%
_______________Comments_______________
• Always add NIS at 0.25% v/v or COC at 1 % v/v.
• Always add a NIS at 0.25% v/v._____________
• Early postemergence up to 8 inches tall corn on
all soils, if grasses are more than 2-leaf stage, 
combine with another herbicide to control these 
weeds.________________________________
• Refer to tank mix product labels for applicable 
use directions, precautions and restrictions.
Tank Mix 
Hert^icide 
Hornet WDG 
Aim EC 
Banvel 
Clarity 
Marksman
Gramoxone Max 
Pendimax® 
Prowl_________
Princep 4L
2,4-D...........

Page 21
Exceed 1 oz/acre
Liberty 16-28 oz/acre
Lightning 1.28 oz/acre
Pendimax / Prowl 1.8- 3.6 pt/acre
Resource 4-6 oz/acre
Spirit 1 oz/acre
2,4-D Ester See label
Basis Gold 14 oz/acre
Pursuit 2.5L
Pursuit 70DG
4 fl oz/acre
1.4 fl oz/acre
Accent 75WDG 
Beacon 75WDG 
Basis 
Steadfast
1/4 - 2/3 oz/acre 
0.76 oz/acre
1/4 - 2/3 oz/acre 
0.75 oz/acre
<3%OM
1.25
1.25 
1.25
<3%OM
1.25
1.25 
1.25
UAN.
• Can be applied up to corn up to 10 inches tall.
• Always add crop oil concentrate at 1% v/v.
• See label for Exceed for geographic restrictions.
• For use on Liberty tolerant corn only. Apply
to grass and broadleaf weeds up to 6 inches 
tall. Do not add additional surfactant.________
• For use on Clearfield corn only. Use an NIS
at 25%v/v and a liquid nitrogen fertilizer at 1 to 
2 qt per acre or ammonium sulfate at 2.5 lb per 
acre.__________________________________
• Apply preemergence or apply early
postemergence to corn up to 3 inches tall, but 
before weeds are more than 1 inch tall._______
• Use only on Clearfield varieties.
• Apply preplant incorporated, preplant surface,
preemergence or early postemergence to 
weeds up to 3 inches tall.__________________
• Apply to weeds less than 5 inches tall. Add a 
crop oil concentrate at 1 to 2 pt/acre and either 
28% nitrogen at 2% v/v or ammonium sulfate at
2.5 Ib/acre. May cause some burn or spotting 
to corn leaves.__________________________
• Always add crop oil concentrate at 1% v/v.
• See label for Spirit for geographic restrictions.
• Apply preplant surface or preemergence to
control emerged broadleaf weeds in corn._____
• Minimum Tremor NXT use rates (pt/acre);
3% or more OM
1.25
1.25-1.75
1.25-1.75
Soil
Coarse
Medium 
Fine
• Always add NIS at 0.25% (v/v) and^ in addition 
if applied under dry conditions, add 4% (v/v) 
clear liquid fertilizer.
• Banvel, Clarity, Marksman, Buctril,
Buctril/atrazine may be added to this mixture to 
provide burndown and residual control of 
broadleaf weeds.________________________
• Minimum Tremor NXT use rates (pt/acre);
3% or moreOM
1.25
1.25-1.75
1.25-1.75
Soil
Coarse
Medium 
Fine
• Always add COC at 1.0% v/v or, under dry arid 
conditions, add COC at 2.0% v/v plus 2 qt/acre 
of 28% liquid nitrogen or 2 Ib/acre of ammonium 
sulfate.
• Banvel, Clarity, Marksman, Buctril, or Tough 
may be added to this mixture to provide 
burndown and residual control of broadleaf 
weeds.

Page 22
Miscanthus and Other Non-food Perennial Bioenergy Crops
Appendix I
Procedure for Testing the Compatibility of Tremor NXT and Tank Mixes with Fluid Fertilizers
3,
4,
5,
For weed control in Miscanthus and other non-food perennial bioenergy crops, apply Tremor NXT 
herbicide at 1.3-1,7 pints per acre after the crop has been transplanted or after fully emerged to a height 
of at least 2-3 inches.
Up to two applications of Tremor NXT herbicide may be made each year. The total amount of this 
product applied each year must not exceed 3.4 pints per acre.
Evaluation:
If either mixture remains uniform for 30 minutes, the combination may be used. Should either mixture 
separate after 30 minutes, but readily remix uniformly with 10 jar inversions, the mixture can be used if 
adequate agitation is maintained in the tank. If the mixture with adjuvant is satisfactory but the one 
without adjuvant is not, be sure to use the adjuvant in the spray tank. Add the adjuvant first at a rate of 3 
pints per 100 gallons of fluid fertilizer. Foaming may be minimized by using moderate agitation. If non- 
dispersible oil, sludge, or clumps of solids form in the mixtures, the combination should not be 
used.
Since fluid fertilizers vary, the following procedure is suggested for determining whether Tremor NXT 
herbicide may be combined with a specific fluid fertilizer for spray tank application.
Procedure:
1.
2.
Materials Needed:
• Tremor NXT and any tank mix products
• Fluid fertilizer to be used
• Adjuvant for fertilizer tank mix; Use any adjuvant cleared for use on growing crops under 40 CFR
180.1001 to improve the compatibility of Tremor NXT with fluid fertilizers. The adjuvant that provides 
the best emulsification depends upon the specific fertilizer under consideration.
• Two 1 quart, wide mouth glass jars with lid or stopper
• Measuring spoons (a 25 ml pipette or graduated cylinder provides more accurate measurement)
• Measuring cup, 8 oz (257 ml)
Pour a pint (about 473 ml) of the fluid fertilizer into each of the quart jars.
Add Tremor NXT and any tank mix combination to the jars. The order of addition is wettable powders 
first with mixing, followed by flowables with mixing and the ECs last. The rate of wettable powders 
and dry flowables is 1 1/2 teaspoon per pound of product per acre to be applied, ECs should be 
added at the rate of 1/2 teaspoon for each pint per acre to be applied. Premixing the wettable 
powders in 1 oz of water before adding to the pint of fluid fertilizer will improve the compatibility of the 
final mixture.
Add 1/2 teaspoon (2 ml) adjuvant to one of the jars, label it as "with," and mix. The rate of 1/2 
teaspoon per pint is equal to 3 pints of adjuvant per 100 gallons of fluid fertilizer.
Close both jars with lids or stoppers and mix the contents by turning the jars upside down 10 times. 
Inspect the surface and body of the mixtures-
(a) Immediately after completing the jar inversions
(b) After allowing the jars to stand undisturbed for 30 minutes
(c) And then again after turning the jars upside down 10 times after the 30 minute inspection
Restrictions:
• Do not allow the Miscanthus or other non-food perennial bioenergy crop treated with Tremor NXT 
herbicide to be grazed or used as animal feed.

Page 23
Appendix II
Dry Bulk Fertilizer Impregnation
Approved Dry Fertilizer Ingredients for Use with Tremor NXT (1)
To determine the amount of Tremor NXT needed for other rates of fertilizer, use this formula;
Pints of Tremor NXT 
per ton of fertilizer
All individual state regulations relating to dry bulk fertilizer blending, registration, labeling, and application 
are the responsibility of the individual and/or company selling Tremor NXT, Tremor fertilizer mixtures.
The following table provides a reference to determine the amount of Tremor NXT to be mixed per ton of 
dry bulk fertilizer for a range of herbicide rates.
For impregnating pesticides on dry fertilizers, use suitable mixers equipped with suitable spraying 
equipment. The spray nozzles should be positioned inside the mixer to provide uniform spray coverage 
of the tumbling fertilizer. Tremor NXT should be sprayed uniformly onto the fertilizer using a fine spray 
pattern. Tank mix components may be applied as separate ingredients with powders and dry flowables 
added first or they may be mixed in a slurry in the proper ratio and added jointly. Tremor NXT may also 
be impregnated on dry bulk fertilizer in the field while the fertilizer is being spread using a pneumatic 
applicator equipped to impregnate herbicides.
Tremor NXT rate (pints/acre) X 2000 
Pounds of fertilizer/acre
N
16
21
18
11
0
0
45
P
20
0
46 
56
0
0 
0
K
0
0
0
0
60
52
0
20.0
13.4
10.0
8,0
6.6
5,8
27.5
18.4
13.8
11.0
9.1
8,0
(1) Do not impregnate on fertilizers containing ammonium nitrate, potassium nitrate, or sodium nitrate.
(2) Some ureas may be phytotoxic when high rates are applied to corn. Use only urea rates knowi to be 
safe for com application.
Tremor NXT Rate (pints/acre) 
To I 2.25 I £75
Pints Tremor NXT 
per Ton of Fertilizer 
.1.......22,5.......1...
_______15,0_______ 
_______1T3_______ 
________9,0________ 
________7,4________
6,5
When applying Tremor NXT alone or in tank mixes with dry bulk fertilizers, follow all directions for use and 
precautions on the respective tank mix product labels regarding use rates, soil texture, application 
methods, and rotational restrictions. Use a minimum of 200 lb of dry bulk fertilizer per acre.
Fertilizer
Ammonium Phosphate-Sulfate 
Ammonium Sulfate_________
Diammonium Phosphate
Monoammonium Phosphate 
Potassium Chloride_________
Potassium Sulfate 
Urea (2)
Fertilizer Rate 
(Ibs/acre)
200 
300 
400 
500 
600 
700
Acres Covered 
(per ton) 
10.0 
6.7 
5.0 
4.0 
3.3 
2,9

Page 24
Refillable containers larger than 5 gallons:
Container Handling: Refillable container. Refill this container with pesticide only. Do not reuse this 
container for any other purpose.
Cleaning the container before final disposal is the responsibility of the person disposing of the container. 
Cleaning before refilling is the responsibility of the refilfer. To clean the container before final disposal, 
empty the remaining contents from this container into application equipment or mix tank. Fill the 
container about 10% full with water. Agitate vigorously or recirculate water with the pump for two 
minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this 
rinsing procedure two more times.
Nonrefillable containers 5 gallons or less:
Container Handling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if 
available, or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures 
allowed by state and local authorities.
Nonrefillable containers larger than 5 gallons:
Container Handling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if 
available, or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures 
allowed by state and local authorities.
Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows; 
Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the 
flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate 
into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds 
after the flow begins to drip. Repeat this procedure two more times. Pressure rinse as follows; Empty 
the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after 
the flow begins to drip. Hold container upside down over application equipment or mix tank or collect 
rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at 
about 40 psi for at least 30 seconds. Drain for 10 seconds after the flow begins to drip.
Precaution: To avoid potential for explosion, do not impregnate Tremor NXT on ammonium sorbate 
nitrate, potassium nitrate, or sodium nitrate fertilizer or fertilizer blends. Do not impregnate on a single (0- 
20-0) or triple (0-46-0) super phosphate. Do not attempt to impregnate Tremor NXT on agricultural 
limestone as the herbicide will not be adequately absorbed.
Do not contaminate water, food, or feed by storage or disposal.
Pesticide Storage: Store in original container only. Keep container closed when not in use. Do not store 
near food or feed. In case of spill or leak on floor or paved surfaces, soak up with vermiculite, earth, or 
synthetic absorbent.
Pesticide Disposal: Pesticide wastes are toxic. Improper disposal of excess pesticide, spray mixture, or 
rinsate is a violation of Federal law. If these wastes cannot be disposed of by use according to label 
instructions, contact your State Pesticide or Environmental Control Agency or the Hazardous Waste 
Representative at the nearest EPA Regional Office for guidance.
If the herbicide/fertilizer mixture is too wet, use of a drying agent is required to provide a dry, free-flowing 
mixture. For mixtures to be used in spinning-disc applicators, Micro-Cel E calcium silicate powder 
(Manville, Filtration & Minerals) is recommended for use as a drying agent. Mixtures to be used in 
pneumatic applicators should use Micro-Cel E or Agsorb 16/30 RVM-MS granular clay (Oil-Dri 
Corporation). The drying agents should be added separately and uniformly to the prepared 
pesticide/fertilizer mixture, in a quantity that is sufficient to provide a suitable free-flowing mixture. 
Generally, less than 2% Micro-Cel E or 5% Agsorb 16/30 RVM-MS by weight is required.
[Storage and Disposal statements moved here from above.] 
STORAGE AND DISPOSAL

Page 25
Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows; 
Empty the remaining contents into application equipment or a mix tank. Fill the container 1/4 full with 
water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least 
one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several 
times. Turn the container over onto its other end and tip it back and forth several times. Empty the 
rinsate into application equipment or a mix tan or store rinsate for later use or disposal. Repeat this 
procedure two more times. Pressure rinse as follows: Empty the remaining contents into application 
equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container 
upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert 
pressure rinsing nozzle in the side of the container, and rinse at about 40 psi for at least 30 seconds. 
Drain for 10 seconds after the flow begins to drip.
To the extent permitted by law, United Suppliers, Inc. shall not be liable for losses or damages resulting 
from handling or use of this product unless United Suppliers, Inc. is promptly notified of such loss or 
damage in writing. To the extent permitted by law, in no case shall United Suppliers, Inc. be liable for 
consequential or incidental damages or losses.
The terms of the W arranty D isclaimer, Inherent Risks of Use and this Limitation of Remedies cannot be 
varied by any written or verbal statements or agreements.—No employee or sales agent of United 
Suppliers, Inc. or the seller is authorized to vary or exceed the terms of the Warranty D isclaimer or this 
Limitation of Remedies in any manner.
FOR CHEMICAL EMERGENCY: Spill, leak, fire, exposure, or accident, call 
CHEMTREC 1-800-424-9300
Limitation of Remedies
To the extent permitted by law, the exclusive remedy for losses or damages resulting from this product 
(including claims based on contract, negligence, strict liability, or other legal theories), shall be limited to, 
at United Suppliers, Inc. election, one of the following:
4^—Refund of purchase price paid by buyer or user for product bought, or 
2:—Replacement of amount of product used.
Warranty D isclaimer
United Suppliers, Inc. warrants that this product conforms to the chemical description on the label and is 
reasonably fit for the purposes stated on the label when used in strict aooordanoe with the directions, 
subject to the inherent risks set forth below.—To the extent permitted by law. United Suppliers, Inc. 
MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OF MERCHANTAB ILITY OR FITNESS FOR 
A PART ICULAR PURPOSE OR ANY OTHER EXPRESS OR IMPLIED WARRANTY.
Terms and Conditions of Use
If terms of the following Warranty Disclaimer, Inherent Risks of U se and Limitation of Remedies are not 
acceptable, return unopened package at once to the seller for a full refund of purchase price paid. To the 
extent permitted by law, otherwise, use by the buyer or any other user constitutes acceptance of the 
terms under Warranty D isclaimer, Inherent Risks of U se and Limitation of Remedies.
Inherent Risks of Use
It is impossible to eliminate all risks associated with use of this product. Crop injury, lack of performance, 
or other unintended consequences may result because of such factors as use of the product contrary to 
label instructions (including conditions noted on the label, such as unfavorable temperatures, soil 
conditions, etc.), abnormal conditions (such as excessive rainfall, drought, tornadoes, hurricanes), 
presence of other materials, the manner of application, or other factors, all of which are beyond the 
control of United Suppliers, Ino. or the seller. To the extent permitted by law, all such risks shall be 
assumed by buyer.

Page 26
Tremor® is a registered trademark of Winfield Solutions, LLC
If you do not agree with or do not accept any of directions for use, the warranty disclaimers, or limitations 
on liability, do not use the product, and return it unopened to the Seller, and the purchase price will be 
refunded.
WARRANTY DISCLAIMER
The directions for use of this product must be followed carefully. TO THE EXTENT CONSISTENT WITH 
APPLICABLE LAW, (1) THE GOODS DELIVERED TO YOU ARE FURNISHED “AS IS” BY 
MANUFACTURER OR SELLER AND (2) MANUFACTURER AND SELLER MAKE NO WARRANTIES, 
GUARANTEES, OR REPRESENTATIONS OF ANY KIND TO BUYER OR USER, EITHER EXPRESS 
OR IMPLIED, OR BY USAGE OF TRADE, STATUTORY OR OTHERWISE, WITH REGARD TO THE 
PRODUCT SOLD, INCLUDING, BUT NOT LIMITED TO MERCHANTABILITY, FITNESS FOR A 
PARTICULAR PURPOSE, USE, OR ELIGIBILITY OF THE PRODUCT FOR ANY PARTICULAR TRADE 
USAGE. UNINTENDED CONSEQUENCES, INCLUDING BUT NOT LIMITED TO INEFFECTIVENESS, 
MAY RESULT BECAUSE OF SUCH FACTORS AS THE PRESENCE OR ABSENCE OF OTHER 
MATERIALS USED IN COMBINATION WITH THE GOODS, OR THE MANNER OF USE OR 
APPLICATION, INCLUDING WEATHER, ALL OF WHICH ARE BEYOND THE CONTROL OF 
MANUFACTURER OR SELLER AND ASSUMED BY BUYER OR USER. THIS WRITING CONTAINS 
ALL OF THE REPRESENTATIONS AND AGREEMENTS BETWEEN BUYER, MANUFACTURER AND 
SELLER, AND NO PERSON OR AGENT OF MANUFACTURER OR SELLER HAS ANY AUTHORITY 
TO MAKE ANY REPRESENTATION OR WARRANTY OR AGREEMENT RELATING IN ANY WAY TO 
THESE GOODS.
LIMITATION OF LIABILITY
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, IN NO EVENT SHALL MANUFACTURER 
OR SELLER BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, OR FOR 
DAMAGES IN THE NATURE OF PENALTIES RELATING TO THE GOODS SOLD, INCLUDING USE, 
APPLICATION, HANDLING, AND DISPOSAL. MANUFACTURER OR SELLER SHALL NOT BE LIABLE 
TO BUYER OR USER BY WAY OF INDEMNIFICATION TO BUYER OR TO CUSTOMERS OF BUYER, 
IF ANY, OR FOR ANY DAMAGES OR SUMS OF MONEY, CLAIMS OR DEMANDS WHATSOEVER, 
RESULTING FROM OR BY REASON OF, OR RISING OUT OF THE MISUSE, OR FAILURE TO 
FOLLOW LABEL WARNINGS OR INSTRUCTIONS FOR USE, OF THE GOODS SOLD BY 
MANUFACTURER OR SELLER TO BUYER. ALL SUCH RISKS SHALL BE ASSUMED BY THE 
BUYER, USER, OR ITS CUSTOMERS. BUYER ’S OR USER ’S EXCLUSIVE REMEDY, AND 
MANUFACTURER ’S OR SELLER ’S TOTAL LIABILITY SHALL BE FOR DAMAGES NOT EXCEEDING 
THE COST OF THE PRODUCT.