crop-chem-docs/corpus/epa_ppls/524-488.md

# MON 8411 HERBICIDE

- EPA Reg No: **524-488**
- Registrant: BAYER CROPSCIENCE, LLC
- Signal word: Caution
- Active ingredients: Acetochlor (85.5%)
- Label accepted: 1996-02-01
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000524-00488-19960201.pdf

---
1
01. -;., I: us ENVIRONMENTAL PROTECTION AGENCY 
~ 1,\ &.r./ OFFICE OF PESTICIDES PROGRAMS 
REGISTRATION DIVISION (TS-767) 
521-1rt15 WASHINGTON. DC 20460 
NOTICE OF PESTICIDE: !Xi'REGOSTRAT'ON 
... 0 REREG1STRATION 
(Under the Federal Insecticide, Fungicide, 
Bnd Rodenticide Act, as amended) 
NAME AND ADDRESS OF REGISTRANT (Include ZlP code) 
r 
r;r. Poy C.0anhauG 
r~OTlsnnto ("f)r'T·,")n~l 
:,ry' 1 /; t~l C::trc~('t I .. .-rn <"11 i te ;: l' ()f1 
: ;;l~:;h i. l1CjtOl, PC' 20 nn I) 
TERM OF ISSUANCE 
NAME OF PESTICIDE PRODUCT 
i\,t" 0tll H,'rbiJ : ,':(, 
L ~ 
I 
NOTE: Changes in labeling formula differing in substance from that accepted in connection with this registration must be 
submitted to and accepted by the Registration Division prior to use of the label in cornmerce. In any correspondence on this 
product always refer to the above U.S. EPA registr-ation number. • 
• On the basis of information furnished by the registrant, the above named pesticide is hereby Registered/Reregistererl' unrler 
the Federal Insecticide, Fungicide, and Rodenticide Act. 
A copy of the labeling accepted in connection with this Registtation/Reregistration is returned herewith. 
Registration is in no way to be construed as an indorsement or approval of this product by this Agency. In order to protect 
health and the environment, the Administrator, on his motion, may at any time suspend or cancel the registration of a pest­
icide in accordance with the Act. The acceptance of any name in connection with the registration of a product under this 
Act is not to be construed as giving the registrant a right to exclusive use of the name or to its use if it has been covered 
by others. 
" , 
:"';.',l(~ i.~: con(~jtio:1~I}~' rC'0jst(:1'f":'G ", :'CCO((~l.:\C' "it~: ::'~''FnJ ''";(-t. 
r" \"~(:('(: ':--Jlt)t :/OU: 
':u h:"l 1 t and/or cite all nCl.ta requirE>0 for th0 registr;:.1t.ion/ren~gistrCitioi1 
'''-',It ·ru~;,)(·:t llD~~.::r rTPR7~ SI2C'. ~(c) (5) an(>j SC'C'. ,1 \lh0n t}'k' l\genc:y r,~r:";':.r·'s 
,'.'" "-,~,'~ u~ similar products to submit such r~:!t.:;:. 
"'(:I'~ i ~lL' r,hriJsc-, "r.'Pl>, Pf-??istr{:ltion 
; '.e..prn(:ucL for .s~i.(lr·'_'-:-jt. 
'~b{': r"t.~f()r, 
'1. ~ubTni.t thrp~" (1:) conif:s of vour ":j.nd\ 1--"r~ntr..:c; 1-~['0~j:Jq 
r,;;-_~ f·2f-:~(· the produC't for shipnen· 
- , ,J'I ., ',' -. 1- J ' 
- , '. ,.,'" -
t \ 
rr')duct Li'CS( 
O
ATT.t;.CHMENT IS APPLICABLE 
, -'-
, SIG~t'VU~t OF APF'f~ G O~F\CIAL. / 
\ L~\.t u ).:1\ '\ ~rn t A. All 
_-,1 i 
,\';,m 8570-6 (Rev. S)r6 ~ - U PREVIOUS EDITION MAY BE USED UNTIL SUPPLY 15 EXHAUS'TED. 
, ·U.S. GPO: 1992-312-018/60303

\ \ \ 
RESTRICTED USB PBSTICIDB 
due to oncogenicity. For retail sale to and use only by Certified Applicators 
or persons under their direct supervision and only for those uses covered by 
the Certified Applicator's certification. 
MON 8411 
HERBICIDE 
BY MONSANTO 
MON 8411 is an emulsifiable herbicide for veed control in Field Corn, 
Production Seed Corn, Silage Corn and Popcorn. 
In case of an emergency involving this product or for user safety information 
on this product, call Collect, day or night (314) 694-4000. 
Complete Directions for Use 
®Registered trademark of Monsanto Company 
EPA Reg. No. 524-XXX 
19%£-1 
Read each of these sections of this label for essential product performance 
.infoonation. 
PRECAUTIONARY STATEMENTS 
GENERAL INFORMATION 
USE RESTRICTIONS 
MIXING, SPRAYING, AND 
HANDLING INSTRUCTIONS 
APPLICATION INFORMATION 
CULTIVATION INFORMATION 
WEED CONTROL WITH MON 8411 
I MON8411.RE~~ 
CCEPTED 
W,,/.:Jtp

Read the entire label before using this product. 
Use only according to label instructions. 
Read "LIMIT OF WARRANTY AND LIABILITY" before buying or using. If terms are 
not acceptable, return at once unopened. 
REFORMULATION IS PROHIBITED. 
LIXIT OF WAMANTY AND LIABILITY 
This Company warrants that this product conforms to the chemical description 
on the label and is reasonably fit for the purposes set forth in the Complete 
Directions for Use label booklet ("Directions") when used in accordance with 
those Directions under the conditions described therein. NO OTHER EXPRESS 
WARRANTY OR IMPLIED WARRANTY OF FITNESS FOR PARTICULAR PURPOSE OR 
MERCHANTABILITY IS MADE. This warranty is also subject to the conditions and 
limitations stated herein. 
Buyer and all users shall promptly notify this Company of any claims whether 
based in contract, negligence, strict liability, other tort or otherwise. 
Buyer and all users are responsible for all loss or damage from use or 
handling which results from conditions beyond the control of this Company, 
including, but not limited to, incompatibility with products other than those 
set forth in the Directions, unusual weather, weather conditions which are 
outside the range considered normal at the application site and for the time 
period when the product is applied, as well as weather conditions which are 
outside the application ranges set forth in the Directions, application in any 
manner not explicitly set forth in the Directions, moisture conditions outside 
the moisture range specified in the Directions, or the presence of products 
other than those set forth in the Directions in or on the soil, crop or 
treated vegetation. 
THE EXCLUSIVE REMEDY OF THE USER OR BUYER, AND THE LIMIT OF THE LIABILITY OF 
THIS COMPANY OR ANY OTHER SELLE~ FOR ANY AND ALL LOSSES, INJURIES OR DAMAGES 
RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT (INCLUDING CLAIMS BASED IN 
CONTRACT, NEGLIGENCE, STRICT LIABILITY, OTHER TORT OR OTHERWISE) SHALL BE THE 
PURCHASE PRICE PAID BY THE USER OR BUYER FOR THE QUANTITY OF THIS PRODUCT 
INVOLVED, OR, AT THE ELECTION OF THIS COMPANY OR ANY OTHER SELLER, THE 
REPLACEMENT OF SUCH QUANTITY, OR, IF NOT ACQUIRED BY PURCHASE, REPLACEMENT OF 
SUCH QUANTITY. IN NO EVENT SHALL THIS COMPANY OR ANY OTHER SELLER BE LIABLE 
FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES. 
Buyer and all users are deemed to have accepted the terms of this LIMIT OF 
WARRANTY AND LIABILITY which may not be varied by any verbal or written 
agreement. 
MON841l.RE4,l

\ 
APPENDIX 
APPLICATION INFORMATION 
BAND TREATMENT 
GROUND BROADCAST TREATMENT 
APPLICATION WITH 
DRY BULK FERTILIZER 
APPLICATION TIMING AND METHODS 
DIRECTIONS FOR USE 
CORN, FIELD CORN, PRODUCTION SEED CORN, 
MON 8411 
HO!1 8411 I lleeeflt: 
MON 8411 + Atrazine 
MON 8411 + Banvel or Clarity 
MON 8411 + Bladex 
MaN 8411 + Extrazine II 
MON 8411 + Marksman 
11011 8411 I PeFfftit 
MaN 8411 + Princep 
MaN 8411 + Prowl 
MaN 8411 + Pursuit 
MON 8411 + Atrazine + Bladex 
MON 8411 + Atrazine + Prowl 
MON 8411 + Bladex + Prowl 
SILAGE CORN AND POPCORN 
CONSERVATION OR MINIMUM TILLAGE SYSTEMS 
At-Planting Applications 
MaN 8411 
MaN 8411 + Atrazine 
MON 8411 + Bladex 
MaN 8411 + Extrazine II 
MaN 8411 + Princep 
MaN 8411 + Pursuit 
MaN 8411 + Atrazine + Bladex 
MaN 8411 + Atrazine + Princep 
Early-Preplant Applications 
MaN 8411 
MaN 8411 + Atrazine 
DISPOSAL 
FLUID FERTILIZER COMPATIBILITY TEST 
GENERAL INFORMATION 
INGREDIENTS 
LIMIT OF WARRANTY AND LIABILITY 
MIXING, SPRAYING, AND HANDLING 
INSTRUCTIONS 
PRECAUTIONARY STATEMENTS 
SOIL TEXTURE 
I MONB411.RE~2

WEEDS CONTROLLED WITH MON 8411 
PRECAUTIONARY STATEMENTS 
Hazards to Humans and Domestic Animals 
Keep out of reach of children. 
CAUTION! 
CAUSES EYE IRRITATION. 
HARMFUL IF SWALLOWED. 
Avoid contact with eyes. 
Wash thoroughly with soap and water after handling. 
FIRST AID: IF IN EYES, immediately flush eyes with plenty of water. Get 
medical attention if irritation persists. 
IF SWALLOWED, call a physician or Poison Control Center. Drink 1 or 2 glasses 
of waterwatere and induce vomiting by touching back of throat with finger. DO 
NOT INDUCE VOMITING OR GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. 
Personal Protective Equipment 
Applicators and other handlers must wear: long-sleeved shirt and long pants, 
waterproof gloves and shoes plus socks. 
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such 
instructions for washables, use detergent and hot water. Keep and wash PPE 
separately from other laundry. 
When handlers use closed systems, enclosed cabs, or aircraft in a manner that 
meets the requirements listed in the Worker Protection Standard (WPS) for 
agricultural pesticides [40 CFR 170.240(d) (4-6»), the handler PPE requirements 
may be reduced or modified as specified in the WPS. 
User Safety Recommendationa: 
User should: 
Wash hands before eating, drinking, chewing gum, using tobacco, Or using the 
toilet. 
Remove clothing immediately if pesticide gets inside. Then wash thoroughly and 
put on clean clothing. 
Remove PPE immediately after handling this product. Wash the outside of 
gloves before removing. As soon as possible, wash thoroughly and change into 
clean clothing. 
In case of an emergency involving this product, 
MON841l. RE1c..i:

Call Collect, day or night, (314) 694-4000. 
Environmental Hazards 
This product is toxic to fish. Do not apply directly to water, or to areas 
where surface water is present or to intertidal areas below the mean high 
water mark. Do not contaminate water when disposing of equipment washwaters. 
This chemical demonstrates the properties and characteristics associated with 
chemicals detected in ground water. The use of this chemical in areas where 
soils are permeable, particularly where the ground water is shallow, may 
result in ground water contamination. 
Acetochlor has properties that may result in surface water contamination via 
dissolved runoff and runoff erosion. Practices should be followed to minimize 
the potential for dissolved runoff and/or runoff erosion. 
ACTIVE INGREDIENT: 
*Acetochlor ........................................................... . 
INERT INGREDIENTS ..................................................... . 
85.5% 
14.5% 
100.0% 
'Contains 960 grams/litre or 8.0 pounds/gallon of 2-chloro-N-ethoxymethyl-N­
(2-ethyl-6-methylphenyl) acetamide. 
U.S. Patent No. 4,256,481. Other patents pending. No license is granted 
under any non-U.S. patents. 
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in any manner 
inconsistent with its labeling. For any requirements specific to your State 
or Tribe, consult the agency responsible for pesticide regulation. 
AGRICULTURAL USE REQUIREMENTS 
use this product only in accordance with its labeling and with the Worker 
Protection Standard, 40 CFR part 170. This Standard contains requirements for 
the protection of agricultural workers on farms, forests, nurseries, and 
greenhouses, and handlers of agricultural pesticides. It contains 
requirements for training, decontamination, notification and emergency 
assistance. It also contains specific instructions and exceptions pertaining 
to the statements on this label about personal protective equipment (PPE) and 
restricted-entry interval. The requirements in this box only apply to uses of 
this product that are covered by the Worker Protection Standard. 
DO not apply this product in a way 
either directly or through drift. 
during application. 
that will contact workers or other persons, 
Only protected handlers may be in the area 
Do not enter or allow worker entry into treated areas during the restricted 
entry interval (REI) of 12 hours. Exception: if the product is soil-injected 
or sOil-incorporated, the Worker Protection Standard, under certain 
I MONB411.RE~Z

circumstances, allows workers to enter the treated area if there will be no 
contact with anything that has been treated. 
PPE required for early entry to treated areas that is permitted under the 
Worker Protection Standard and that involves contact with anything that has 
been treated, such as plants, soil, or water, are: coveralls, waterproof 
gloves and shoes plus socks. 
For more product information, call toll-free 1-800-332-3111. 
Storage and Disposal 
Do not contaminate water, foodstuffs, feed or seed by storage or disposal. 
• 
DISPOSAL: Wastes resulting from the use of this product that cannot be used or 
chemically reprocessed should be disposed of in a landfill approved for 
pesticide disposal or in accordance with applicable Federal, state or local 
procedures. 
Emptied container retains vapor and product residue. Observe all labeled 
safeguards until container is cleaned, reconditioned, or destroyed. 
(See the individual container label for disposal information.) 
GENERAL INFORMATION 
MON 8411 herbicide is recommended for control of yellow nutsedge and the 
annual grasses and broadleaf weeds listed in the "WEEDS CONTROLLED" section of 
this label. This product will not control emerged seedlings. This product may 
be applied either as a surface application before or after planting, e~ afte~ 
e~el' emergence. ~hi3 pre<i>lCt IDa) alse be ~shallowly incorporated prior to 
planting to blend the herbicide treatment into the upper 1 to 2 inches of 
soil. Except for minimum or conservation tillage systems, the seedbed should 
be fine, firm and free of clods and trash. 
Read and carefully observe precautionary statements and all other information 
appearing on the labeling of all products used in mixtures and sequential 
treatments. 
OSB RESTRICTIONS 
This chemical demonstrates the properties and characteristics associated with 
chemicals detected in ground water. The use of this chemical in areas where 
soils are permeable, particularly where the ground water is shallow, may 
result in ground water contamination. Do not apply to the following soils if 
ground water depth is 30 feet or less: sands with less than 3% organic 
matter; loamy sands with less than 2% organic matter; or sandy loams with less 
than 1% organic matter. 
This product may not be mixed or loaded within 50 feet of any wellS (including 
abandoned wellS and drainage wells), sink holes, intermittent streams and 
rivers, and natural or impounded lakes and reservoirs. This setback does not 
apply to properly capped or plugged abandoned wells and does not apply to 
impervious pad or properly diked mixing/loading areas. 
MON8411.RE-l-,Z

Operations that involve mixing, loading, rinsing, or washing of this product 
into or from pesticide handling or application equipment or containers within 
50 feet of any well are prohibited unless conducted on an impervious pad 
constructed to withstand the weight of the heaviest load that may be 
positioned on or moved across the pad. Such a pad shall be designed and 
maintained to contain any product spills or equipment leaks, container or 
equipment rinse or washwater, and rainwater that may fallon pad. Surface 
water shall not be allowed to either flow over Or from the pad, which means 
the pad must be self contained. The pad shall be sloped to facilitate 
material removal. An unroofed pad shall be of sufficient capacity to contain 
a minimum of 110% of the capacity of the largest pesticide container or 
application equipment on the pad. A pad that is covered by a roof of 
sufficient size to completely exclude precipitation from contact with the pad 
shall have a minimum containment capacity of 100% of the capacity of the 
largest pesticide container or application equipment on the pad. Containment 
capacities as described above shall be maintained at all times. The above 
specified minimum containment capacities do not apply to vehicles when 
delivering pesticide shipments to the mixing/loading site. States may have in 
effect additional requirements regarding wellhead setbacks and operational 
containment. 
DO not flood irrigate to apply or incorporate this product. 
Product must be used in a manner which will prevent back siphoning into wellS, 
spills or improper disposal of excess pesticide, spray mixtures or rinsates. 
Do not apply this product through any type of irrigation system. 
Disposal of excess pesticide, spray mixtures or rinsate should be accordi~g to 
label use instructions or according to the State Pesticide or Environmental 
Control Agency or the Hazardous Waste representative at the nearest EPA 
regional office. 
DO not apply under conditions whiCh favor runoff or wind erosion of soil 
containing this product to non-target areas. TO prevent off-site movement due 
to runoff or wind erosion: 
Avoid treating powdery dry Or light sandy soils when conditions are favorable 
for wind erosion. Under these conditions, the soil surface should first be 
settled by rainfall or irrigation. 
Do not apply to impervious substrates such as paved or highly 
compacted surfaces or fro£en or snow covered soils. 
DO not use tailwater from the first flood or furrow irrigation of 
treated fields to treat non-target crops unless at least 1/2 inch of 
rainfall has occurred between application and the first irrigation. 
Do not apply this product using aerial application equipment. 
Do not apply when wind conditions favor drift to non-target sites. To 
minimize spray drift to non-target areas: 
Use low pressure application equipment capable of producing a 
large droplet spray. Do not use nozzles that produce a fine 
droplet spray. Minimize drift by using sufficient spray volume to 
ensure adequate coverage with large droplet size sprays. 
I MONB411.RE1~

• 
Keep ground driven spray boom as low as possible above the target 
surface. 
Make application when the wind velocity favors on-target product 
deposition (approximately 3-10 mph). Do not apply when wind velocity 
exceeds 15 mph. Avoid application when gusts approach 15 mph. 
Low humidity and high temperatures increase the likelihood of spray 
drift to sensitive areas. Avoid spraying during conditions of low 
humidity and/or high temperatures. Do not apply during inversion 
conditions. 
Use of this product not consistent with this label may result 
persons, animals or crops, or other unintended consequences. 
closed to prevent spills and contamination. 
in injury to 
Keep container 
Flush sprayer with clean water after use. 
Do not rotate to crops other than soybeans, corn (all types including sweet 
corn), milo (sorghum), wheat, or tobacco. 
SOIL TEXTURli: 
Applicators should evaluate soil conditions carefully to assure that they 
choose the correct label rate. 
The recommended use rates of this product and the other herbicides labeled for 
use in tank mixtures with this product vary with soil texture. Unless soil 
texture is specifically named, rate tables throughout this label refer to only 
three soil textural groups: coarse, medium and fine. The following is a 
complete listing Of soil textures included in each of these three soil 
textural groups: 
SOIL TEXTURAL GROUP SOIL TEXTURE 
COARSE: sand, loamy sand, sandy loam 
MEDIUM: loam, silt loam, Silt, sandy clay loam 
FINE: silty clay loam, c~ay loam, sandy clay, silty clay, clay 
Refer to the above table to determine the corresponding soil textural group 
for the soil to be treated. 
MIXING, SPRAYING AND JlANl)LING INSTRUCTIONS 
Non 
Direct contact or exposure to this product or spray mixtures of this product 
should be minimized. The following instructions for transfer, mixing, 
cleaning or repairing equipment should be followed in order to minimize this 
exposure. Review the protective clothing requirements as listed in the 
"PRECAUTIONARY STATEMENTS" section of this label (front panel) and do not use 
this product until you have the necessary protective clothing. 
2.5 Gallon Containers 
MONB411.RH", ~-l-

open pouring from these containers can result in exposure from splashing or 
spilling. Special care in lifting and pouring are strongly recommended. 
Bulk Containers 
Open pouring from these containers can result in exposure from splashing or 
spilling and is not recommended. This product should be transferred from 
these containers to the mix or spray tank using pumps or transfer probes. The 
probe or pump should not be removed from the container or disconnected until 
the container is emptied and rinsed. Use the pump or probe.system to rinse 
the empty container and transfer the rinsate directly to the mix or spray 
tank. 
Equipment Cleaning & Repair 
Cleaning and repair of transfer systems and application equipment is a source 
of exposure to this product. Care should be taken to minimize exposure during 
cleaning and repair of transfer systems and application equipment. Whenever 
possible, these systems or equipment should be rinsed before being cleaned or 
repaired. 
When repairs must be made during transfer or application, the equipment should 
be shut down, and special care taken to avoid contact with the pesticide. 
Always predetermine the compatibility of this product or labeled tank mixtures 
of this product with water carrier or sprayable fluid fertilizer carrier by 
mixing small proportional quantities in advance. See the "STANDARD SPRAYABLE 
FLUID FERTILIZER COMPATIBILITY TEST" section in this label to determine the 
compatibility of this product and the labeled tank mixtures recommended for 
use with sprayable fluid fertilizer carrier. 
Mix this product or labeled tank mixture of this product with the appropriate 
carrier as follows: 
1. Place a 20 to 35 mesh screen or wetting basket over filling port. 
2. Through the screen, fill the sprayer tank one-half full with the 
appropriate carrier. 
3. If a compatibility agent is necessary to improve mixing or to prevent 
the formation of undesirable and unsprayable gels or precipitates, while 
agitating add it to the carrier already in the tank. Use only 
compatibility agents cleared by FDA for this use. Read and follow all 
directions for use, cautionary statements and all other information 
appearing on the selected compatibility agent label. Check for adequate 
agitation. 
4. If a wettable powder or dry flowable formulation is used, make a slurry 
with water and add it slowly through the screen into the tank. Continue 
agitation. 
5. If a flowable formulation is used, add slowly through SCreen into the 
tank. Mixing and compatibility may be improved when flowable is pre­
mixed one part flowable with one part water and added to the tank in 
diluted form. 
i MON8411.RH"

6. Add this product slowly through the screen into the tank. Mixing and 
compatibility may be improved when this product is prediluted with two 
parts of water and added to the tank in diluted form. 
7. Complete tilling the sprayer tank with carrier. If Roundupt or Gramoxone 
'" Extra is used, add the required amount near the end of the filling 
process. Remove hose from tank immediately after filling to avoid 
siphoning back into the carrier source. 
Maintain good agitation at all times until the contents of the tank are 
sprayed. NOTE: If spray mixture is allowed to settle at any time, thorough 
agitation is required to resuspend the mixture before spraying is resumed. 
Keep by-pass line on or near bottom of tank to minimize foaming. Screen size 
in nozzle or line strainers should be 50 mesh. Carefully select proper nozzle 
to avoid spraying a fine mist. Check for even distribution of spray droplets. 
To reduce loss of the chemical due to drift of a fine mist, apply at nozzle 
pressures below 40 psi. 
STANDARD SPRAYABLK FLUID FERTILIZER 
COMPATIBILITY TEST 
Herbicides may not always mix evenly throughout a sprayable fluid fertilizer 
or the components may separate too quickly to make their combined use of 
practical value. This may be due to certain characteristics of the different 
fluid fertilizers. A simple test using small quantities of the components is 
suggested to provide compatibility potential.~The test follows: 
A. Materials Required For A Compatibility Test 
1. Two one-quart jars with lid or stopper (marked "with" and "without"). 
2. TEAspoons (for a more exacting test, a five to ten milliliter (mI.) 
pipette or graduated cylinder is desirable) . 
3. Sprayable fluid fertilizer to be tested. 
4. The herbicide chemicals to be mixed. 
S. A compatibility agent (the purpose of the adjuvant is to help keep the 
fertilizer and crop protection chemical in suspension, if this 
assistance is needed) . 
B. Procedure 
1. Add one pint Of the sprayable fluid fertilizer that will be used or 
other herbicide carrier to each jar marked "with" and "without". 
WITH 
MONB411.RH~ 
Add One Pint Liquid Fertilizer 
To Two Quart Jars. 
WITHOUT

2. To the jar marked "with", add 1/4 TEAspoon or 1.2 milliliters of a 
suitable compatibility agent; shake gently for five to ten seconds to 
mix. (1/4 Teaspoon in one pint is the equivalent of two pints per 100 
gallons of liquid fertilizer.) 
TO Jar Marked "With" 
Add Compatibility Agent 
And Shake to Mix. 
WITH WITHOUT 
3. To each jar add the appropriate amount of herbicide(s). If more than one 
is used, add them separately with the wettable powders or dry flowables 
added first, flowables second and liquid last. Shake gently five to ten 
seconds after each addition. 
WITH 
HERBICIDE 
Wettable 
Powders 
or 
Dry Flowables 
HERBICIDE 
Emulsifiable 
Concentrates or 
Flowables or 
Liquids or 
Solutions 
Add Herbicide(s) To Both Jars 
And Shake to Mix. 
RATE/A 
1 lb. 
2 lb. 
3 lb. 
4 lb. 
5 lb. 
RATE/A 
1 pint 
1 quart 
2 quarts 
3 quarts 
1 gallon 
5 quarts 
WITHOUT 
Amount to Be 
Added Per Pint of 
Sprayable Fluid Fertilizer 
(Assuming Volume is 25 gal/A) 
TEAspoons 
0.5 
1 
2 
3 
4 
5 
Level 
TEAspoons 
1.5 
3 
4.5 
6 
7.5 
Level 
Milliliters 
or 2.4 
or 4.7 
or 9.5 
or 14 .2 
or 19.0 
or 23.8 
This compatibility test is designed for 25 gallons of spray per acre with the 
maximum labeled rate of herbicide. For changes in spray volume or herbicide 
rate, make appropriate changes in the ingredients of the test. Regardless of 
spray volume, the amount of compatibility agent should be equal to two or 
three pints (two pints ~ 1/4 TEAspoon or 1.2 milliliters, three pints ~ 3/8 
TEAspoon or 1.B milliliters per pint of sprayable fluid fertilizer) per 100 
gallons of liquid fertilizer. 
I MONB411.RH"

c. Observations and Decisions 
1. If the herbicide(s) and the sprayable fluid fertilizer are compatible. 
2. If a compatibility agent is necessary. 
Five minutes after the final addition and mixing, observe both jars for the 
formation of large flakes, sludge, gels or other precipitates. Observe if the 
herbicide(s) cannot be physically mixed with the liquid fertilizer but remains 
as small oily particles in the solution. 
If incompatibility in any form described above occurs in the jar "with" the 
compatibility agent added, the liquid fertilizer and the herbicide(s) should 
not be used together in the same spray tank. 
If incompatibility as described above occurs in the jar "without" the adjuvant 
but not in the jar "with" adjuvant, the use of a compatibility adjuvant is 
recommended. 
Both jars should be allowed to stand and be observed periodically for one-half 
hour. If the separate layers of liquid fertilizer and additives can be 
resuspended by shaking, commercial application is possible. An emulsifiable 
concentrate normally will go to the top after standing; wettable powders will 
either settle to the bottom of the tank or jar, or float to the top, depending 
upon the der.sity of the fertilizers. 
If the herbicide(s) is compatible with fluid fertilizer in the foregoing test 
without having to use a compatibility agent, fluid fertilizer may be used for 
the premixing. If it is not compatible without the compatibility agent, the 
herbicide(s) should be premixed with water before adding to the spray tank. 
APPLICATION INFORMATION 
APPLICATION SYSTEMS 
Ground Broadcast Treatment--Apply this product and the labeled tank mixtures 
in 10 or more gallons of solution per acre using broadcast boom equipment. The 
carrier may be either water or sprayable fluid fertilizer as specified for the 
crop to be treated in the "DIRECTIONS FOR USE" section of this label. Do not 
apply during periods of gusty winds, when winds are in excess of 15 mph or 
when other conditions favoring drift exist. 
Band Treatment--Apply a broadcast equivalent rate and volume per acre. To 
determine these: 
Band width 
in inches 
Row width X 
in inches 
Band width 
in inches 
Row width X 
in inches 
Broadcast 
RATE 
per acre 
Broadcast 
VOLUME 
per acre 
Band RATE 
per acre 
Band VOLUME 
per acre 
Application with dry bulk fertilizer--The herbicide-fertilizer impregnation 
process (In-Plant and On-Board systems) must be completed only by commercial 
fertilizer or chemical dealerships properly equipped for this procedure. 
MON8411.RH,l 12-1 ~

Contact Monsanto Company for additional information regarding recommended 
equipment and methods for herbicide-fertilizer impregnation applications. 
Dry bulk fertilizer may be impregnated with this product or the tank mixtures 
of this product plus atrazine or this product plus Bladex'" on corn. This 
product and these tank mixtures must be applied with 200 to 450 pounds of dry 
bulk fertilizer per acre and shallowly incorporated within 14 days prior to 
planting. On medium and fine-textured soils in areas where soil incorporation 
is not planned, i.e., reduced tillage situations or in some conventional 
tillage situations, applications can be made up to 30 days before planting to 
allow moisture to move the he~bicide-fertilizer mixture into the soil. On 
coarse-textured soils, applications can be made up to 14 days prior to 
planting. The herbicide must be applied as recommended in this label for the 
crop, weed and soil type treated. Refer to the table for broadcast rate per 
acre to determine the recommended rate per acre for the herbicide treatment to 
be applied. 
The following table provides a reference to determine the amount of LIQUID 
herbicide to be mixed per ton of dry bulk fertilizer for a range of herbicide 
recommendations for fertilizer rates per acre: 
RECOMMENDED PINTS 
LIQUID HERBICIDE/ACRE 
Fertilizer Acres 1.5 2.0 2.5 
Rate Covered (Pints of Herbicide/Ton 
(Lb/Acre) (Per Ton) Dry Bulk Fertilizer) 
200 10 15 20 25 
250 8 12 16 20 
300 6.7 10.1 13.4 16.8 
350 S.7 8.6 1l. 4 14.3 
400 5 7.5 10 12.5 
450 4.5 6.8 9 11. 3 
To determine the amount of herbicide needed for rates not included in the 
preceding table, use the following formula: 
Recommended Herbicide Rate 
Pints/Acre X 2000 
Pounds Fertilizer/Acre 
Pints of herbicide 
per ton of dry bulk fertilizer 
With the In-Plant system, mix and blend the dry fertilizer and herbicide 
mixture in a closed rotary-drum type mixture allowing sufficient time to 
ensure unifoDn coverage. Use at least one ton of dry fertilizer per mixing 
operation. Inject the herbicide into the drum over a minimum of a 2-minute 
period and allow at least 2·additional minutes mixing time to ensure 
uniformity. The nozzle used to spray the herbicide treatment must be placed 
inside the mixer to provide uniform spray coverage of the tumbling fertilizer. 
If the dry fertilizer used has inadequate absorptive capacity, use a higher 
absorptive material such as Agsorb 1M , MP-79 N or MicrocelT.W E, to provide a 
free-flowing mixture. Contact Monsanto Company for specific guidelines with 
regard to the sequence of addition for the varioys cornponenets and the amount 
of drying agent to add to provide a free-flowing-mixture. 
MON841l. RU;

The following table provides a partial list of dry fertilizers which may be 
impregnated with this product or tank mixtures of this product with other 
herbicides: 
Fertilizer 
Ammonium sulfate 
(21-0-0) 
Arranonium 
phosphate-sulfate 
(16-20-0) 
Diammonium 
phosphate 
(18-46-0) 
Potassium chloride 
(0-0-60) 
Potassium sulfate 
(0-0-52) 
Single super-phosphate 
(0-20-0) 
Treble super-phosphate 
(0-46-0) 
'Urea (46-0-0) 
MON 8411 
Yes 
Yes 
Yes 
Yes 
Yes 
Yes 
Yes 
Yes 
MON 8411 MON 8411 
+ 
ATRAZINE 
Yes 
Yes 
Yes 
Yes 
Yes 
No 
No 
Yes 
+ 
BLADEX 
Yes 
Yes 
Yes 
Yes 
Yes 
NO 
NO 
Yes 
*Some ureas may be phytotoxic when applied on corn. Use only ureas known to 
be safe to corn. 
NOTE: DO NOT impregnate this product or tank mixtures of this product with 
other herbicides on fertilizers containing ammonium nitrate, potassium 
nitrate or sodium nitrate. 
Spread the herbicide-dry fertilizer mixture uniformly with a properly 
calibrated applicator: dribble, pneumatic (air flow) or spin. When using spin 
applicators, fertilizers impregnated with this product Or tank mixtures of 
this product with other herbicides must be spread at half-rate and overlapped 
100 percent to obtain full rate and uniform distribution. Non-uniform 
spreading of the fertilizer-herbicide mixture may result in unsatisfactory 
weed control or crop injury. 
Pneumatic (Compressed Air) Application (MON 8411 Alone)--High humidity, high 
urea concentrations, low fertilizer use rates, and dusty fertilizer may cause 
herbicide-fertilizer mixture to build up or plug the distributor head, air 
tubes, or deflector plates. To minimize buildup, premix MON 8411 with Exxon 
Aromatic 200 at a rate of 1 to 4 pints per gallon of MON 8411. Aromatic 200 
may be used in either fertilizer blender or through direct injection systems. 
Drying agents should not be used when using Aromatic 200. 
MONS"l. ... ' 1 4-l- ~

NOTES: Mixtures of MON 8411 and Aromatic 200 must be used on dry fertilizer 
only. Poor results or crop injury may result if these mixtures are used in 
water or liquid fertilizer solutions for spraying applications. When 
impregnating MON 8411 in a blender before application, a drier mixture can be 
attained by substituting a drying agent for Aromatic 200. The use of Agsorb 
or a drying agent of 6/30 particle size are recommended. Drying agents are 
not recommended for use with On-The-Go impregnation equipment. 
APPLICATION TIMING AND METHODS 
NOTE: Only one treatment of this product may be applied to a labeled crop. 
Early Preplant Surface--This product and some labeled tank mixtures of this 
product may be applied in no-till and other conservation tillage systems 
before weeds emerge and up to 45 days before planting field corn or silage 
corn. Split applications can be made 30 to 4S days prior to planting with 60 
percent of the recommended broadcast rate applied initially and the remaining 
40 percent applied at planting. Applications made less than 30 days prior to 
planting can be made either as a split or as a single application. If weeds 
are present at the time of application, apply this product in tank mixture 
with an appropriate contact herbicide. Observe directions for use, 
precautions and restrictions on the label of the contact herbicide. During 
the planting operation, be careful not to move untreated soil to the surface 
or move treated soil out of the row, as weed control may be reduced. 
Preemergence Surface Application--This product and all labeled tank mixtures 
may.be applied to the soil surface after planting and prior to either crop or 
weed emergence. Apply within 5 days of last preplant tillage. If weeds emerge 
after treatment, or if treatment is applied more than 5 days after last 
preplant tillage, rotary hoe or shallowly cultivate immediately to improve 
performance. Precipitation or overhead sprinkler irrigation is required after 
application to move the herbicide treatment into the weed germination zone. 
The amount of precipitation or overhead sprinkler irrigation required depends 
on existing soil mixture, soil type and percent organic matter content, but 
1/4 to 3/4 inch is normally adequate. Performance is improved when moisture 
is received within 7 days after application and prior to weed emergence. High 
intensity or excessive rainfall or excessive irrigation after application may 
reduce control. 
Prep1ant Incorporation--This product and many of the labeled tank mixtures may 
be mixed into the soil using shallow incorporation equipment any time within 
14 days prior to planting. Apply the recommended treatment rate to the soil 
surface as a broadcast application. Either existing soil moisture or 
subsequent precipitation or irrigation is required to bring incorporated 
herbicide treatments into contact with germinating weed seedlings. If weeds 
emerge after treatment, rotary hoe or shallowly cultivate immedi3tely to 
improve performance. 
I-Paaa Incorporation (Surface Blend N ): Shallowly incorporate (Surface Blend) 
the treatment into the upper 1 to 2 inches of the soil. Equipment should be 
operated at manufacturer's designed speed for incorporation to ensure adequate 
mixing and distribution of the herbicide treatment in the soil. Equipment 
design including any drag attachments must be adequate to avoid soil ridging 
which may result in streaked or reduced weed control. Soil conditions, 
including moisture content and crop residue levelS, must be suitable to allow 
thorough and uniform mixing with the equipment used for I-pass incorporation.

Contact Monsanto Company for additional information regarding recommended 
equipment and methods for Surface Blend Application. 
2-Pass Incorporation: When 2-pass incorporation is used, shallowly incorporate 
the herbicide treatment into the upper 1 to 2 inches Qf the soil with 
equipment set to work the soil NO DEEPER THAN 4 INCHES. The second pass must 
be made at an angle to and no deeper than the first pass to ensure proper 
distribution of the herbicide treatment in the soil. 
he a!>!>liea !>esteffiergefiee "'Atil eerA reaehes 11 iAehe" iA heigftt. A!>!>lieatiefl 
ffitlSt 58 rnaEle !3l!'ier 'te ;Ieed: seefilin~ 8l'f'lergenee or ift a 'I:anl[ mix'ture "teaat: 
e"At""ls effi6rgea ~eea". Reaa afta fell". all re"trieti"fls efla aireetl"ft" eft 
taA)' ffii" !>"ef'I"et laeels. Refe. te tfte s!>eeifie t"eatllteftt 1ftteftaea 1ft tfte 
"DlREC'1'IOIIS FOR USB" seetie .. ef the lahel te aete_iAe if !>estellterge .. ee 
ap!31ieations to corR are ~eeommefleea eRa aetermiRC the proper weed and eern 
SffOH"Eft stage liR'titaeioHs. Preeipitatiel'l Sf 8llcracad sprinkler irrigatioH is 
"e~irea after a!>!>lieatieA te lIteve the herhieiae treatmeftt iHte the ~eea 
~erffiination roane 1::0 eORtral t:1flCmergea weeds. 'fac amount of preeipitatiofl or 
irri~atieft re~i"ea ae!>eAas eft e"i"tiH~ "eil "",i9t""e, seil tYt'e aHa !>ereeftt 
orgaHic ffb9ttef eOfltcHt, SHt 1/4 'to 3/4 incfi is Hormell}! aacfftlat:e. If •• teeds 
emer~e after E:Eeatmcnt, rotary hoe or 3ftalleW'1~ ctllti'Q ate toe i~re, e 
perfoBRal'lee. 
DO 110'1' ma)'e !>estel!l€r~eAee S'" faee a~!>lieat:iells "3i"~ 9!>rayaele fltlia 
fertilizer as eRe carrier eeeause se~ere erep ifl)tlr~ ffifi~ eeeur. 
Cultivation Information--Delay cultivation after application for as long as 
possible unless weeds or grasses emerge. Shallowly cultivate or rotary hoe 
immediately if weeds or grasses emerge. If cultivation is necessary because of 
soil crusting or compaction, set equipment shallow and minimize lateral soil 
movement to avoid dilution or displacement of the herbicide treatment. If a 
band application is used and weeds have emerged in the treated band, set 
cultivator to throw soil into the row covering the band. 
WElIDS CONTROLLED 
When applied as directed under conditions described, this product and tank 
mixtures of this product will control or reduce competition from the weeds 
listed. 
NOTE: C Control 
Barnyardgrass 
Crabgrass 
Crowfootgrass 
Cupgrass, prairie 
MON9411.RH.1 
R Reduced Competition 
• AIINOAL GRASSP 
MON 8411 plus 
MON 8411 ATRAZINE BANVEL'" BLADEX'" PRINCEP'" 
or CLARITY'" 
C C C C C 
C C C C C 
C C C C C 
C C C C C 
18-
PURSUIT'" 
C 
C 
C 
C 
~

\ \ 
IYj ~t 
Cupgrass, woollyl e e e e e c 
Foxtail: giant, green, e e c e e c 
robust purple, robust 
white, yellow 
Goosegrass C C C C C C 
Johnsongrass, seedling R R R R R C 
Millet, foxtap R R R R R R 
Millet, proso R R R R R R 
Oat, wild R e R e e R 
Panicurn: browntop, fall e e c e c C 
Panicum, Texas R R R R R R 
Rice, red C C • C C C 
Sandbur, Grassbur R R • R R R 
Shattercane, wildcane 2 R R • R R R 
Signalgrass, broadleaf C e C c c c 
Sprangletop, red C C C C C C 
Wheat, volunteer R C R e c R 
Wltchs.rass c c c c c c 
ANNUAL BROAD LEAVES 
MON 8411 plus 
MON 8411 ATRAZINE BANVEL .... BLADEXTl.I PRINCEp .... PURSUITT'W 
or CLARITY"" 
Beggarweed, Florida R C • C • R 
Carpet weed e c c c c c 
Cocklebur 3 • C C C R R 
Galinsoga C C C C C C 
Groundcherry, annual • e • • • • 
Groundcherry, cutleaf R C e c c R 
Henbit C C C C C C 
JimsonweedS R C • C R C 
Kochia 4 5 R C • C C C 
Lambsquarters C C C C C C 
Morningglory3: tall, • C R C C R 
pitted, ivy1eaf, 
entlreleaf, smallfloW'er 
Mustard • C C C C C 
Night.hade: black, hasry C C e c c C 
Pigweed, Carelessweed C C C C C C 
Purslane C C C C C C 
Pusley, Florida C C C C C C 
Ragweed, common 5 C C C C C C 
Ragweed, giant 3 • C C C C R 
Sick1epod • C • C R • 
Sida, prickly; Teaweed R C • C C C 
Smart weed R C C C C C 
Starbur, bristly R C • C R • 
Sunflower, conunmon3 ,8 • C R C R C 
Vel vetleaf, Buttonweed 6,8 R C C C R C 
MON8411.RE-l-", 17-!- ~

, 
----,~~. 
Waterhemp c c c c c c 
SEDGE 
Nutsedge, yellow? c c c c c 
'Use 2.75 to 3 pints per acre of this product applied alone or in tank-mix 
combinations. Control can be erratic, especially under dry weather 
conditions for best results. Control can be erratic especially under dry 
weather conditions. Control escaped weeds with cultivation or application of 
an appropriate EPA-registered postemergence herbicide. Contact the local 
Monsanto representative for details regarding a complete wooelly cupgrass 
management program. 
~se 2.5 to 3 pints per acre of this product to reduce competition from this 
weed. 
'Use a minimum of 1.5 quarts atrazine 4L or 2.25 quarts Bladex 4L per aCre in 
tank-mixture combinations to control this weed. Control can be erratic 
especially under dry weather conditions. Control escaped weeds with 
cultivation or application of an appropriate EPA-registered postemergence 
herbicide. 
'If triazine-resistant biotypes are suspected, tank mixtures with triazine 
herbicides may require a post sequential application of a non-triazine 
herbicide for control. 
'Use the higher rate in the recommended range for MON 8411 alone and in 
tank mixtures with triazine herbicides if triazine-resistant biotypes are 
suspected. 
'Use a minimum of 1.5 quarts atrazine or 2.25 quarts Bladex 4L per acre in 
tank-mixture combinations to control this weed. In areas restricted to 1 Ib 
atrazine per acre (1 quart atrazine 4L) or where less atrazine per acre 
is desired, on medium and fine textured soils, use 2.5 pints of MON 8411 in a 
tank mixture with 1 quart atrazine 4L per aCre for control of this weed. 
Control can be erratic especially under dry weather conditions. Control 
escaped weeds with cultivation or application of an appropriate EPA­
registered postemergence herbicide. 
'Use 2.25 to 3 pints per acre of this product applied alone or in tank 
mixtures and apply preplant incorporated only for control on medium and 
fine-textured soils. 
'When using a tank mixture of MON 8411 plus Pursuit, these weeds are more 
consistently controlled by preplant incorporated treatments. 
Certain tank mixtures of this product and broadleaf herbicides may be combined 
with applications of Roundup herbicide or Gramoxone Extra for control of many 
emerged weeds prior to corn emergence. Refer to the Roundup or Gramoxone Extra 
label for a list of emerged weeds controlled by tank mixtures with these 
products. 
MONB411.RE-:l::" 
FIELD CORN, PRODOCTION SEED CORN, 
SILAGE CORN AND POPCORN 
• 11j $6

HON 8411 
Apply this product in water or sprayable fluid fertilizer solution for control 
of yellow nutsedge and the annual grasses and broadleaf weeds listed in the 
"HEEDS CONTROLLED" section of this label. 
APPROVED APPLICATION SYSTEMS 
Ground--Broadcast boom; banded 
Dry Bulk Fertilizer Impregnation 
Reference: The "APPLICATION SYSTEMS" section of this label provides detailed 
information on the proper application of this product using the system 
selected. 
APPROVED APPLICATION METHODS 
Preplant Incorporated--Apply this product within 14 days prior to planting and 
shallowly incorporate or Surface Blend into the upper 1 to 2 inches of soil. 
Irrigation within 10 days following planting may improve weed control. 
Preemergence Surface--Apply this product after planting, before crop and weed 
emergence and within 5 days after last preplant tillage operation. 
cern reaches 11 inches in height. Be net e"eeea 3 pints per Bere. Weeas 
emer<;ea at the time af applieatiefi are net eel'ltre11ea by this prea"et. If 
\icedo aFe cftl:cl"geel at applieatisR, 3flalle .. l~ et:11ti ..... "'ate or retar::y hoe te ifftpre ~e 
pCrfCl'ffiiiflee. DO nOT ffiB;XC f36stcmergcflce 3t:1rfaee s}9plieat ions I;loiftg ofH:a)i able 
fll:liel fertilizer as the carl:ier because OC Jere eral=' iftj til') may oceti!:. 
Reference: The "APPLICATION TIMING AND METHODS" section of this label 
provides detailed information and procedures for the application timing and 
method selected. 
RECOMMENDED RATES: Refer to the following tables for the recommended broadcast 
treatment rates for this product. Applications which are not consistent with 
recommendations in this label may result in unsatisfactory weed control or 
crop injury. 
Applioation Rates 
SOIL 
TEXTURAL 
GROUP' 
Coarse**** 
Medium 
Pine 
I MON6411.RE:r" 
BROADCAST RATE PER ACRE (PINTS)" 
Less than 3% 
organic matter 
1. 0 to 1.5 
1.5 to 2.0 
1. 5 to 2.0 
3% or more 
organic matter*** 
1.5 
1.5 to 2.0 
2.0 to 2.5

• 
*Refer to the "SOIL TEXTURE" section of this label to determine the 
corresponding textural group for the soil to be treated. 
'*Use the higher rate in the recommended range in areas of heavy weed 
infestation. 
***On soils with 6 to 10% organic matter use 2.25 to 3 pints/acre. On soils 
with more than 10% organic matter use 3 pints/acre. 
****Refer to the "USE RESTRICTIONS" section of this label for restrictions. 
Af>ply tRis tanl, Ifti"tti~e in .·ate~ afte" erap elfte~qef>ee te p~e. ide p~elfte~qenee 
and pestelfte~qenee eentral af ee~tain q~ass and b~aadleaf weeds. Refe~ ta the 
Aeeent hereieide laeel fe~ speeifie weeds eant"alled pasteHle~qenee. 
lIPPI\OV£lJ lIPPhICA'HOIi SYSIffilS 
Clatind B~eadeast eealft, banded 
Re£ereftee. Ihe "lIPPLIC1HIOIl SYSIffiIS" seetian af this laeel pre. ides detailed 
infarlftatien en the prape.- applieatien af tRis p.-adtlet tlSiflq tfie S) stelft 
seleeteei. 
:IPPROVED IIPPhIC!.IIOn IIEIllODS 
Poserm rgeftce Stlr£aee .. "1p!91) tRia tank ftliJCE'tJ:fC after eerR emer~eflce tIf3 te 11 
inefies ifl heiqht and ~fltil q.-asses are 3 i,whes in fieiqht. ."pplieatians Hlade 
afte:!' hceaa cJweed 3 iP.ichcs 1ft f18igfit: ffIil} Het pre. ide aatiafaetef} eel'3:1:rel. 
Always aee a flenionie 3t:lf'faetaflt at 0.25% ./0:. ':Phis tank ft"tixt .. tl~e 'will flot 
eaflt.-el eertain elfter~ee! eraae!lea! weeds. Ae!e!itian af Ban.el ar Pe",..it8 .ill 
ilftpra',e perfarlftaflee afl e~aadleaf ~eee!s. Refer ta the Aeeeflt fierbieie!e laeel 
for 8~eeifie "eeas eentrolleel. Geme leaf Bt:lrfi te carR ffla) eectll' eeeasieflally 
btit stiese'Jtleflt qra~h ar )iele! shatlle! flet be affeetee!. 
Re£ereftee. Ihe ".'tPPhlCAIIOlI 'PIIHIIC NID IIEIIlODS" seetian af this label 
pre. ie!es detailed i"ferlftatiafl ane! preeee!.ues fa" the applieat ieA tiffiiflq and 
Iftetfiae! seleetee!. 
RECOllllElIDElJ R.'<'FES. Refe" ta the falla"iflq tables fa" tfie reea_ene!ed braae!east 
treatlfteAt rates far this taflk Iftil.t .. "e. Applieatiefls whieh are Aat eaflsisteflt 
-,.".it6 reeefflft'l€:fl:eiatiefls in this le1ge1 NY l!esl:llt ift l:1fl:set::isfeetel!Y weed eSfl:'trel 
a .. e.-ap in:) .. ,,~ . 
Appliea~i&ft Ra~ea 
BWf, 
IEXIua'th 
MONB411.RH" 
BROABCAS'f Fb,.''l':1?B PBR AGR£ * * 
hess tfiaA 3% 3% el' mere 
e:t'~afiie matter 8zg-aHie matter

, , 
GROUP' 11011 8411 IICCGII1 HO!I 8411 IICCGII1 
(PHI1S) (OUNCES) (PINl?S) (Ol»ICGS) 
Coarse**** 1.0 toe l. 25 1/2 toe 2/3 l.25 toe 1.5 1/2 .. e 2/3 
HeM "'" 1.0 toe 2.0 1/2 toe 2/3 1.5 te 2.0 1/2 te 2/3 
Fiftc l.5 .. e 2.0 1/2 .. e 2/3 1.5 .. e 2.5 1/2 .. e 2/3 
'Refer .. e .. he "5011 1EK1URED see .. ien ef tftis laael te de .. erm±fte .. he 
eerresl'ef\dift'J te"""",al 'J"e~1' fe", the seil .. e ae "",ea"ed. 
**U38 tae hi~fier rate ift the reeOftlft'tCHeea rBfH}Ce if\: areas ef fiea "'1 ... ced 
iflfestatl"". 
'''0" seils .H,h 6 Ee 10% e"''Jaftie _E .. el! "se 2 .25 .. e 3.0 l'inEs/ae"e. On seils 
with more thaft 10% or~aflie matter ~3e 3.9 pints/aere. 
""Refe" Ee the "USE RES1RIC1IOIIS" seeEleft ef this leeel f"" res .. rietiens. 
NON 8411 plus ATRAZINE 
(TANK MIXTURE) 
Apply this tank mixture in water or sprayable fluid fertilizer solutions for 
control of yellow nutsedge and the annual grasses and broadleaf weeds listed 
in the "WEEDS CONTROLLED" section of this label. 
APPROVED APPLICATION SYSTEMS 
Ground--Broadcast boom: banded 
Dry Bulk Fertilizer Impregnation 
Reference: The "APPLICATION SYSTEMS" section of this label provides detailed 
information on the proper application of this tank mixture using the system 
selected. 
APPROVED APPLICATION METHODS 
Preplant Incorporated--Apply this tank mixture within 14 days prior to 
planting and shallowly incorporate or Surface Blend into the upper 1 to 2 
inches of soil. 
Preemergenoa Surfaoa--Apply this tank mixture after planting, before crop and 
weed emergence and within 5 days after last preplant tillage operation. 
s"a!j'e afta Efte "e"ft is fte mere tllaft 11 ifteftes in llei!j'llt. l'l'l'l!eat!e"s ",aae 
aq ena .. he 2 leaf ste'Je _y ftet I'",e"iae satiBfae".,,,y weea eefttl!el. Sellle leaf 
I'>""R .. e eerR _y eee~r eeeasieRally I'>~t stHlseqt>eni: 'Jre· .... h el! yiela she"le1 ftet 
Ile affeetea. DO 1101 _ke l'esteme"''JeRee sto"faee al'l'lieatiefts tosift'J Sl'"ayaele 
fluid fertilizer as the carrier "Beeal:lse severe ere!, injtll':l may eecul'. 
Reference: The "APPLICATION TIMING AND METHODS" section of this label 
provides detailed information and procedures for the application timing and 
method selected. 
MONS 411. RB"

• • 
NOTE: The maximum application rate of atrazine is 2.5 pounds active 
ingredient per acre per calendar year (2.5 quarts per acre atrazine 4L). On 
highly erodible soils (as defined by the Soil Conservation Service) with less 
than 30 percent residue cover, the maximum rate of atrazine is 1.6 pounds 
active ingredient (1.6 quarts per acre of atrazine 4L). On soils not highly 
erodible or on highly erodible soils with more than 30 percent plant residue 
cover, the maximum rate of atrazine is 2 pounds active ingredient per acre (2 
quarts per acre of atrazine 4L). 
CORN, SOYBEANS* OR MILO (SORGHUM) can be planted the year following use of 
this mixture. 
*There is a possibility of injury due to carryover of atrazine if soybeans or 
other non~labeled crops are planted the following year. DO NOT plant 
soybeans the year following use of this tank mixture on furrow irrigated 
corn. 
DO NOT graze treated area or feed treated forage to livestock for 21 days 
following application of this tank mixture. 
RECOMMENDED RATES: Refer to the following tables for the recommended broadcast 
treatment rates for this tank mixture. Applications which are not consistent 
with recommendations in this label may result in unsatisfactory weed control 
or crop injury. 
Application Rates 
BROADCAST RATE PER ACRE ** 
Less than 3% 
organic matter 
3% or more 
organic matter 
SOIL 
TEXTURAL 
GROUP * MON 8411 + ATRAZINE 4L*** MON 8411 + ATRAZINE 4L*** 
Coarse**** 
Medium 
Fine 
(PINTS) 
1.0 
1.0 to 
1.5 to 
(QUARTS) 
1.25 to 
1.5 1.25 to 
2.0 1. 5 . to 
(PINTS) (QUARTS) 
2.0 1.0 to 1.5 1.25 to 
2.0 1.5 to 2.0 1.5 to 
2.0 1.5 to 2.0 1.5 to 
*Refer to the "SOIL TEXTURE" section of this label to determine the 
corresponding textural group for the soil to be treated. 
2.0 
2.0 
2.0 
**Use the higher rates in the recommended ranges in areas of heavy weed 
infestation. In areas restricted to 1 pound atrazine per acre (1 quart 
atrazine 4L) or where less atrazine per acre is desired, on medium and 
fine-textured soils use 2.5 pints of MON 8411 in a tank mixture with 1 
quart atrazine 4L per acre for control of grass and broadleaf weeds 
listed in the "WEEDS CONTROLLED" section of the label except cocklebur. 
***Use rates listed in this label when using atrazine 4L. Use equivalent 
rates when using atrazine 90% dry flowable formulations. One quart of 
atrazine 4L equals 1.1 pounds of atrazine 90% dry flowable. 
MONB4.1l.RE.-l-.l

, • • 
****Refer to the "USE RESTRICTIONS" section of this label for restrictions. 
MON 8411 plus BANVKL or CLARITY 
(TANK MIXTURE) 
For use on level or flat-planted field corn on soils with more than 2 percent 
organic matter. 
Apply in water or sprayable fluid fertilizer solutions for control of the 
annual grasses and broadleaf weeds listed in the "WEEDS CONTROLLED" section of 
this label. 
APPROVED APPLICATION SYSTEMS 
Ground--Broadcast boom; banded 
Reference: The "APPLICATION SYSTEMS" section of this label provides detailed 
information on the proper application of this tank mixture using ground spray 
equipment. 
APPROVED APPLICATION METHODS 
Preemergence Surface--Apply this tank mixture after planting, before crop and 
weeds emerge and within 5 days of last preplant tillage operation. Corn seeds 
must be planted 1-1/2 inches or deeper beneath the soil surface. Direct 
chemical contact with corn seed must be avoided since crop injury may result. 
Apply far enough behind planter equipment to avoid any incorporation by the 
planter wheel or other covering device. Do not apply if corn seeds are planted 
less than 1-1/2 inches beneath the soil surface. 
Pe8t,p=?r~eftee 6'\tr£aee .. "tpply this taak: fftixtl1re pl"ier te efRer~eflee sf t:jrass8s 
and befere een. e"eeeds 8 inehes in heiqht. S!his tank !!Ii"t""e dees net 
eentrel e!!lerqed qra3ses. Mdni8n ef },eeellt t8 this tallk !!Ii"t"re .ill il!l!'re.e 
eentrel ef eft\€rqed 9'ras3e3. Se!!le leaf l'l"rn te eell' _) eee"r eeea3ienally l'l"t 
s"bse,!"eRE qrswEfl Sr )ield sfls"l<i fist l'le aHeete<i. DO liDS! _ke pestemer'lenee 
surfaee applieatieft3 H3ift~ spr8}aele fltlie fertilize~ a3 tfle earrier eeeause 
severe ere~ ifijtlr~ ffia~ eeetlr. 
Reference: The "APPLICATION TIMING AND METHODS" section of this label 
provides detailed information and procedures for the application timing and 
method selected. 
NOTE: PREVENT DRIFT TO SOYBEANS OR OTHER DESIRABLE PLANTS. Do not use on 
furrow irrigated corn, or when corn is planted at the bottom of a furrow, 
utilizing lister, tillar other similar planting methods. DO NOT 
incorporate after planting or corn emergence. If it is necessary to drag 
for leveling or rotary hoe to break soil crust, DO NOT disturb the soil 
more than 1/2 inch deep. 
RECOMMENDED RATES: Refer to the following table for the recommended broadcast 
treatment rates for this tank mixture. Applications which are not consistent 
with recommendations in this label may result in unsatisfactory weed control 
or crop injury and/or destruction. 
Application Rates 
MON'8411. RE-t"

SOIL 
TEXTURAL 
GROUP' 
Coarse*** 
Medium 
Fine 
• 
BROADCAST RATE PER ACRE (PINTS)" 
2 to 
organic 
MON 8411 + 
1.0 to 1.5 
1.5 to 2.0 
1.5 to 2.0 
3% 
matter 
BANVEL 
or CLARITY 
1 
1 
1 
3% or more 
organic matter 
MON 8411 + BANVEL 
or CLARITY 
1.5 1 
1.5 to 2.0 1 
2.0 to 2.5 1 
'Refer to the "SOIL TEXTURE" section of this label to determine the 
corresponding textural group for the soil to be treated. 
**Use the higher rates in the recommended ranges in areas of heavy weed 
infestation. 
"'On coarse-textured soils containing 2% or more organic matter, use 
MON 8411 plus Banvel or Clarity only on sandy loam. Do not use on sand 
and loamy sand with less than 2% organic matter. Refer to the "USE 
RESTRICTIONS" section of this label for restrictions. 
NON 8411 plus BLADEX 
(TANK MIXTURE) 
Apply this tank mixture in water or sprayable fluid fertilizer solutions for 
contrOl of yellow nutsedge, and the annual grasses and broadleaf weeds listed 
in the "WEEDS CONTROLLED" section of this label. 
APPROVED APPLICATION SYSTEMS 
Ground--Broadcast boom; banded 
Dry Bulk Fertilizer Impregnation 
Reference: The "APPLICATION SYSTEMS' section of this label provides 
information on the proper application of this tank mixture using the system 
selected. 
APPROVED APPLICATION METHODS 
Preplant Incorporated--Apply this tank mixture within 14 days prior to 
planting and shallowly incorporate or Surface Blend into the upper 1 to 2 
inches of soil. 
Preemergence Surface--Apply this tank mixture after planting, before crop and 
weed emergence and within 5 days after last preplant tillage operation. 
Reference: The "APPLICATION TIMING AND METHODS" section of this label 
provides detailed information and procedures for the application timing and 
method selected. 
MON8411. RE±~

• 
Reference: The "APPLICATION SYSTEMS" section of this label provides 
information on the proper application of this tank mixture using the system 
selected. 
APPROVED APPLICATION METHODS 
Preplant Incorporated--Apply this tank mixture within 14 days prior to 
planting and shallowly incorporate or Surface Blend into the upper 1 to 2 
inches of soil. 
Preemergence Surface--Apply this tank mixture after planting, before crop and 
weed emergence and within 5 days after last preplant tillage operation. 
Reference: The "APPLICATION TIMING AND METHODS" section of this label 
provides detailed information and procedures for the application timing and 
method selected. 
RECOMMENDED RATES: Refer to the following tables for the recommended broadcast 
treatment rates for this tank mixture. Applications which are not consistent 
with recommendations in this label may result in unsatisfactory weed control 
or crop injury. 
Application Rates 
BROADCAST RATE PER ACRE * * 
SOIL 
TEXTURAL 
GROUP* 
Coarse**** 
Medium 
Fine 
1% to 3% 
organic matter 
MON 8411 
(PINTS) 
1.0 
1.0 to 1.5 
1.0 to 1.5 
EXTRAZINE 
+ 4L*** 
(QUARTS) 
1.25 
1.5 
1.5 
to 1.7 
to 2.0 
to 2.5 
II 
3% or more 
organic matter 
EXTRAZINE II 
MON 8411 + 4L*** 
(PINTS) 
1.0 
1.25 
1.5 
to 1.5 
to 1. 75 
to 2.0 
(QUARTS) 
1. 75 
2.0 
2.5 
to 2.25 
to 2.5 
to 3.0 
*Refer to the "SOIL TEXTURE" section of this label to determine the 
corresponding textural group for the soil to be treated. 
**Use the higher rates in the recommended ranges in areas of heavy weed 
infestation. 
***Use rates listed in this label using Extrazine II 4L. Use equivalent rates 
when using Extrazine II 90% dry flowable formulations. One quart of 
Extrazine 4L equals 1.1 pounds of Extrazine II 90% dry flowable. 
****On coarse-textured soils containing less than 2% organic matter, use 
MON 8411 plus Extrazine II only on sandy loam. Do not use on sand 
and loamy sand with less than 2% organic matter. Refer to the "USE 
RESTRICTIONS" section of this label for restrictions. 
MON8411.Rm:.

, 
RECOMMENDED RATES: Refer to the following tables for the recommended broadcast 
treatment rates for this tank mixture. Applications which are not consistent 
with recommendations in this label may result in unsatisfactory weed control 
or crop injury. 
Application RAtes 
BROADCAST RATE PER ACRE •• 
1% to 3% 3% or more 
organic matter organic matter 
SOIL BLADEX BLADEX 
TEXTURAL MON 8411 + 4L*** MON 8411 + 4L*** 
GROUP' (PINTS) (QUARTS) (PINTS) (QUARTS) 
Coarse**** 1.0 1.0 to 1.5 1. 0 to 1. 5 1.25 to 2.0 
Medium 1.0 to 1.5 1.25 to 1. 75 1. 25 to 1. 75 1. 75 to 2.25 
Fine 1.0 to 1.5 1.5 to 2.0 1.5 to 2.0 2.0 to 2.5 
*Refer to the "SOIL TEXTURE" section of this label to determine the 
corresponding textural group for the soil to be treated. 
*'Use the higher rates in the recommended ranges in areas of heavy weed 
infestation. 
***Use rates listed in this label using Bladex 4L. Use equivalent rates when 
using Bladex 90% dry flowable formulations. One quart of Bladex 4L equals 
1.1 pounds of Bladex 90% dry flowable. 
****On coarse-textured soils containing less than 2% organic matter, use 
MON 8411 plus Bladex only on sandy loam. Do not use on sand and 
loamy sand with less than 2% organic matter. Refer to the "USE 
RESTRICTIONS" section of this label for restrictions. 
NON 8411 plus EXTRAZINE'" II 
• (TANK MIXTURE) 
Apply this tank mixture in water or sprayable fluid fertilizer solutions for 
control of yellow nutsedge, and the annual grasses and broadleaf weeds listed 
for MON 8411 plus Bladex in the "WEEDS CONTROLLED" section of this label. 
Do not graze treated area or feed treated forage to livestock for 21 days 
following application of this tank-mixture. 
APPROVED APPLICATION SYSTEMS 
Ground--Broadcast boom; banded 
Dry Bulk Fertilizer Impregnation 
I MONB41l0 RE-ll

NON 8411 plus KARJCSMAN'" 
(TANK MIXTURE) 
, 
For use on level or flat-planted field corn on soils with more than 2 percent 
organic matter. 
Apply in water Or sprayable fluid fertilizer solutions for control of the 
annual grasses and broadleaf weeds listed for MON 8411 plus atrazine in the 
"WEEDS CONTROLLED" section of this label. 
APPROVED APPLICATION SYSTEMS 
Ground--Broadcast boom; banded 
Reference: The "APPLICATION SYSTEMS" section of this label provides detailed 
information on the proper application of this tank mixture using ground spray 
equipment. 
APPROVED APPLICATION METHODS 
Preemergence Surface--Apply this tank mixture after planting, before crop and 
weeds emerge and within 5 days of last preplant tillage operation. Corn seeds 
must be planted 1-1/2 inches or deeper beneath the soil surface. Direct 
chemical contact with corn seed must be avoided since crop injury may result. 
Apply far enough behind planter equipment to avoid any incorporation by the 
planter wheel or other covering device. Do not apply if corn seeds are 
planted less than 1-1/2 inches beneath the soil surface. 
Pose m E:ge!'ltee Stlri"aee b~!91~ this tafl]{ ffti3rttlre 1gefeFc gFBS3CS FeaeR the 2 
leaf sta'j'e afla the ee~fl ~eaehes 8 iflehes ifl hei'l'ht. "'l'l'lieatio"s Rlaae be) o"a 
the 2 leaf sta'j'e -"HI "ot I'~oviae satisfaete~) 'l'~ass eefltrol. SORie leaf blu" 
te ee!:fl Ria} eee,,~ oeeasioflally btlt stlbsefjUeflE 'l'~Oo<tfl o~ ) ield sho"ld "ot be 
effeeted. DO 110']' Rieke l'esteRle~'l'e"ee stlrfaee a!9!9lieatiofls tlsi,,'l' sl'~ayable fltlid 
fer'tili:ccr as the carrie]!' eeca\::l:se severe erep if'!::;I:lf:~ may oeC1:lr. 
Rafer&nce: The "APPLICATION TIMING AND METHODS" section of this label 
provides detailed information and procedures for the application timing and 
method selected. 
NOTE: PREVENT DRIFT TO SOYBEANS OR OTHER DESIRABLE PLANTS. Do not use on 
furrow irrigated corn, or when corn is planted at the bottom of a furrow, 
utilizing lister, till or other similar planting methods. DO NOT 
incorporate after planting or corn emergence. If it is necessary to drag 
for leveling or rotary hoe to break soil crust, DO NOT disturb the soil 
more than 1/2 inch deep. 
RECOMMENDED RATES: Refer to the following table for the recommended broadcast 
treatment rates for this tank mixture. Applications whiCh are not consistent 
with recommendations in this label may result in unsatisfactory weed control 
or crop injury and/or destruction. 
Application Rates 
I MONB411.RH"

SOIL 
TEXTURAL 
GROUP * 
Coarse*** 
Medium 
Fine 
, , 
BROADCAST RATE PER ACRE (PINTS)'* 
2 to 3% 
organic matter 
MON 8411 + MARKSMAN 
l. 0 to l. 5 
l. 5 to 2.0 
1. 5 to 2.0 
3.5 
3.5 
3.5 
3% or more 
organic matter 
MON 8411 + MARKSMAN 
l.5 
1. 5 to 2.0 
2.0 to 2.5 
3.5 
3.5 
3.5 
'Refer to the "SOIL TEXTURE" section of this label to determine the 
corresponding textural group for the soil to be treated. 
-*Use the higher rates in the recommended ranges in areas of heavy weed 
infestation. 
***On coarse-textured soils containing 2% or more organic matter, use 
MON 8411 plus Marksman only on sandy loam. Do not use on sand and 
loamy sand with less than 2% organic matter. Refer to the "USE 
RESTRICTIONS" section of this label for restrictions. 
Mel! aU1 1'1"" PSRI!I'M 
}'tP!:91Y "this tank ffli3CEl:lre ift ... ·ater atter ere!, eft'\er~efl:ee to pro-·tide !:9f'eem:er~enee 
eOfrtrel of eertaifl: ~l!'a3S 'ana b~oadleaf weeds efta l"63teffier~eflee control of 
b~eadleaf '.eed. li.ted eR the Perntit he~bieide label, 
lIPPRO\'E!l APPLICA'!'Io!1 SYSTGIIS 
GrOtll':Hl Droaaeast eeofft, baflEieti 
Re£e" .... ee, The "lIPPL IC!:l'I 011 SYS'!'E1IS· seeeieR ef ehis label p"e oldes detailed 
iRfa_atie" eft the prepe~ applieatie" ef this pEedtiet ti.iR§' the syste .. 
selected:. 
ld?PROV:SB ld?PbIGA':FIGn UB'l'IlODS 
p" .. Io,m "9_"" S .. "f8.,.. Aflpl~ tohis toaRk Iftixl:tire after eelR elfter§,eRee tip toe 11 
i"ehes iR hei§'ht aRd tiRtoil heel'is reaeh 3 i"ehes iR hei§,hto. '!'his toaRk Ifti"ttire 
·.ill ReI: p"e. ide eeRto"el sf elfte,,§,e<1 §'rasses. hddhieR ef heee"t I:e I:his 
tank ft'tilEE1::ll'C will eontrol emer~ea ~:lasses. Seme leaf 19\:lzon 1::e earfl fRa:~ eeet:lr 
eeeasieRall~ b~t stibSe~eRI: §'~e~h er ~iell'i shetild Reto be affeel:el'i. 
Refe" .... .,... '!'he "lIPPLICh'!'IOII '!'I1HIIG Mill 11E'!'IIO!lS· seel:ie" ef this 1 abel 
~~e,ides detailed iRfsrIftBtie" aRd preeed~res fer the applieatieR toilfti,,§, aRd 
"etohed seleeted. 
RECOIIlIEIIIlE!l RM'SS. Refer te the felle"i,,§, eables fer the reeeJftlfteRl'iel'i breadea.t 
treatlfte"to <ate. fer this predtiet. Applieatie"s ~hieh are Ret eeRsistento .itoh 
MON"".R£~.i! 28-!- ~

, 
Yeeen!ftefteiatisf'l::S 1ft this label :ft'IBy :res-tilt 1ft tlftsstisfactery .. eed: eallErsl er 
ere!, iRj~"y. 
WE> 
TSKTUR.% 
GROUP' 
Cearse*** 
FiRe 
ORGABCASq' Fl.Vl'B PER: ACRE * * 
bess HleR 3% 3 % '" me "e 
11011 8411 PEllHI'f8 11011 8411 
(PIII'I'S) (OUlICSS) (PIII'I'S) 
1.9 te 1.5 2/3 1.25 
1.5 te 2.9 2/3 1.5 to 2.9 
1.5 te 2.9 2/3 2.9 toe 2.5 
PERlin 
(OUlICES) 
2/3 
213 
2/3 
'Refe" te the "SOlI. TEXTURE" seetien ef this label te sete"miRe the 
eeffes!,eRaiR~ textural ~"e~!, fe" the seil te ee t"eates. 
**Use t:fle tl:i~:Aer rate if.! tHe reC6l'ftfReFleea rafl:~e ift ayeae of flea rj -.,eea 
iJ'l:festatiofl. 
"'Refe" te the "USE RES'I'RIC'I'IOIIS" seetieR ef this leeel fer festlietieRs. 
MeN 8411 plus PRINCEP 
(TANK MIXTURE) 
Apply this tank mixture in water or sprayable fluid fertilizer solutions for 
control of yellow nutsedge and the annual grasses and broadleaf weeds listed 
in the "WEEDS CONTROLLED" section of this label. 
APPROVED APPLICATION SYSTEMS 
Ground--Broadcast boom; banded 
Dry Bulk Fertilizer Impregnation 
Reference: The "APPLICATION SYSTEMS" section of this label provides detailed 
information on the proper application of this tank mixture using the system 
selected. 
APPROVED APPLICATION METHODS 
Preplant Incorporated--Apply this tank mixture within 14 days prior to 
planting and shallowly incorporate or Surface Blend into the upper 1 to 2 
inches of soil. 
I MONB41l0 REt" 
,

, , 
Preemergance Surface--Apply this tank mixture after planting, before crop and 
weed emergence and within 5 days after last preplant tillage operation. 
Reference: The "APPLICATION TIMING AND METHODS" section of this label 
provides detailed information and procedures for the application timing and 
method selected. 
NOTE: LAND TREATED WITH PRINCEP SHOULD NOT BE PLANTED TO ANY CROP OTHER THAN 
CORN FOR ONE YEAR FOLLOWING TREATMENT AS CROP INJURY MAY OCCUR. AFTER HARVEST 
OF TREATED CROP, PLOW AND THOROUGHLY TILL THE SOIL IN THE FALL OR SPRING TO 
MINIMIZE POSSIBLE INJURY TO SPRING SEEDED ROTATIONAL CROPS. 
RECOMMENDED RATES: Refer to the following tables for the recommended broadcast 
treatment rates for this tank mixture. Applications which are not consistent 
with recommendations in this label may result in unsatisfactory weed control 
or crop injury. 
Application Rates 
SOIL 
TEXTURAL 
GROUP * 
Coarse**** 
Medium 
Fine 
BROADCAST RATE PER ACRE ** 
Less than 3% 
organic matter 
3% or more 
organic matter 
MON 8411 + 
(PINTS) 
1.0 
1. 0 to 1. 5 
1.5 to 2.0 
PRINCEP 4L*** MON 8411 + 
(QUARTS) (PINTS) 
1.25 to 2.0 
1.25 to 2.0 
1. 5 to 2.0 
1.0 to 1.5 
1. 5 to 2.0 
1. 5 to 2.0 
PRINCEP 4L*** 
(QUARTS) 
1.25 to 2.0 
1.5 to 2.0 
1. 5 to 2.0 
*Refer to the "SOIL TEXTURE" section of this label to determine the 
corresponding textural group for the soil to be treated. 
**Use the higher rates in the recommended ranges in areas of heavy weed 
infestation. 
***Use rates listed in this label when using Princep 4L. Use equivalent 
rates when using Princep 90% dry flowable formulations. One quart of 
Princep 4L equals 1.1 pounds of Princep 90% dry flowable. 
****Refer to the "USE RESTRICTIONS" section of this label for restrictions. 
MeN 8411 plus PROWL'" 
(TANK MIXTURE) 
Apply this tank mixture in water or sprayable fluid fertilizer solutions for 
control of yellow nutsedge and the annual grasses and broadleaf weeds listed 
in the "WEEDS CONTROLLED" section of this label for MON 8411. 
MONB411.RE-t" 
, 
31l >b

APPROVED APPLICATION SYSTEMS 
Ground--Broadcast boom; banded 
Dry Bulk Fertilizer Impregnation 
Reference: The "APPLICATION SYSTEMS" section of this label provides detailed 
information on the proper application of this tank mixture using the system 
selected. 
APPROVED APPLICATION METHODS 
Preemergence Surface--Apply this tank mixture after planting, before crop and 
weed emergence and within 5 days after last preplant tillage operation. 
J DO NOT preplant incorporate this tank-mixture as serious crop injury can 
result. 
Reference: The "APPLICATION TIMING AND METHODS" section of this label 
provides detailed information and procedures for the application timing and 
method selected. 
RECOMMENDED RATES: Refer to the following tables for the recommended broadcast 
treatment rates for this tank mixture. Applications which are not consistent 
with recommendations in this label may result in unsatisfactory weed control 
or crop injury. 
Application Rates 
BROADCAST RATE PER ACRE (PINTS) ** 
Less than 3% 
organic matter 
3% or more 
organic matter 
SOIL 
TEXTURAL 
GROUP * MON 8411 + PROWL*** MON 8411 + PROWL*** 
Coarse**** 1.0 to 1.5 
Medium 1.25 to 2.0 
Fine 1.5 to 2.0 
1.0 
1.0 to 2.0 
1.0 to 2.0 
1.25 
1.5 
1. 75 
to 1.5 
to 2.0 
to 2.5 
1.0 
1.0 
1.0 
*Refer to the "SOIL TEXTURE" section of this label to determine the 
corresponding textural group for the soil to be treated. 
to 2.0 
to 2.0 
**Use the higher rates in the recommended ranges in areas of heavy weed 
infestation. 
***Use rates listed in this label when using Prowl. Use equivalent 
rates when using Prowl 3.3 EC. One quart of Prowl equals 1.2 quarts of 
Prowl 3.3 EC. 
I MON841LRH"

• 
""Refer to the "USE RESTRICTIONS" section of this label for restrictions. 
NON 8411 plus PURSOXT 
(TANK MIXTURE) 
Apply this tank mixture in water or sprayable fluid fertilizer solutions for 
control of yellow nutsedge and the annual grasses and broadleaf weeds listed 
in the "WEEDS CONTROLLED" section of this label. 
APPROVED APPLICATION SYSTEMS 
Ground--Broadcast boom: banded 
Reference: The "APPLICATION SYSTEMS" section of this label provides detailed 
information on the proper application of this tank mixture using the system 
selected. 
APPROVED APPLICATION METHODS 
Prep1ant Incorporated--Apply this tank mixture within 14 days prior to 
planting and shallowly incorporate or Surface Blend into the upper 1 to 2 
inches of soil. 
, 
Preemergence Surface--Apply this tank mixture after planting, before crop and 
weed emergence and within 5 days after last preplant tillage operation. 
Peet:. ~t;enee 8~~£aee ~~l~ this 'Eanll ft'tiltttll!c eeief:c .. cede Fcael=1: 3 inches in 
hei~ht ana the eera iB ae mere thaa 11 iaeheB ia hei~ht. ApplieatieaB maae 
after weeas are lle},,,,a 3 i"e;,es i" ;,ei'1;,t ""'} "et predae satiBfactery 
cOHtral. CeHtatl"'· er Resel,e'· ;,e"bieiae ""'y be stibBtittltea fa" P,,,,suit iH 
this tank miutl:ll'6. Refer te 'tHese ~redt:let: labels feOf' reeofflft'l€:fl:e.ee. tiDe ::Eates. 
SeH'tC: leaf at}:Efl toe COrn mal eccld]!: eec8sionall)' B'tit St:lBSC€ftlCnt: g-rePl'tfl or yield 
ohatlla flet be affeetee!. DO 11O'l' make l'a5temer'1eftee 5tlrfaee al'l'lieatiafls >10ifl'1 
51'"ayable tIttle! te"tiliee" aB tlle ea"rie" beea>1se Be~e"e e"ep iflj""y _y 
OCCUr. 
Reference: The "APPLICATION TIMING AND METHODS· section of this label 
provides detailed information and procedures for the application timing and 
method selected. 
NOTE: THIS TANK-MIXTURE IS FOR USE ONLY ON SELECTED FIELD CORN HYBRIDS (IMI­
CORN) WARRANTED BY THE SEED COMPANY TO POSSESS RESISTANCE/TOLERANCE TO DIRECT 
APPLICATION OF PURSUIT (FOR EXAMPLE: PIONEER IR HYBRIDS). DO NOT APPLY 
PURSUIT TO CORN HYBRIDS WHICH LACK GENETIC RESISTANCE/TOLERANCE TO PURSUIT 
HERBICIDE. OBSERVE ALL PRECAUTIONS AND LIMITATIONS ON THE MON 8411 AND 
PURSUIT LABELS BEFORE USE OF THIS TANK MIXTURE INCLUDING PRECAUTIONS ON 
MINIMUM RECROPPING INTERVAL AND ROTATIONAL GUIDELINES. 
RECOMMENDED RATES: Refer to the following tables for the recommended broadcast 
treatment rates for this tank mixture. Applications whiCh are not consistent 
MON8411.RE-!2,

, 
with recommendations in this label may result in unsatisfactory weed control 
or crop injury. 
Application Rates 
BROADCAST RATE PER ACRE •• 
Less than 3% 
organic matter 
3% or more 
organic matter 
SOIL 
TEXTURAL 
GROUP * 
Coarse*** 
Medium 
Fine 
MON 8411 
(PINTS) 
1.0 
1.0 to 
1.5 to 
+ PURSUIT 
(OUNCES) 
4 
1.5 4 
2.0 4 
MON 8411 + 
(PINTS) 
1.0 to 1.5 
1.5 to 2.0 
1.5 to 2.0 
PURSUIT 
(OUNCES) 
4 
4 
4 
*Refer to the "SOIL TEXTURE" section of this label to determine the 
corresponding textural group for the soil to be treated. 
**Use the higher rates in the recommended ranges in areas of heavy weed 
infestation. 
***Refer to the "USE RESTRICTIONS" section of this label for restrictions. 
HeN 8411 plus ATRAZINE plus BLADEX 
(TANK MIXTURE) 
Apply this tank mixture in water or sprayable fluid fertilizer solutions for 
control of yellow nutsedge, and the annual grasses and broadleaf weeds list.ed 
in the "WEEDS CONTROLLED" section of this label for MON 8411 plus Atrazine. 
APPROVED APPLICATION SYSTEMS 
Ground--Broadcast boom; banded 
Dry Bulk Fertilizer Impregnation 
Reference: The "APPLICATION SYSTEMS" section of this label provides 
information on the proper application of this tank mixture using the system 
selected. 
APPROVED APPLICATION METHODS 
Preplant Incorporated--Apply this tank mixture within 14 days prior to 
planting and shallowly incorporate Or Surface Blend into the upper 1 to 2 
inches of soil. 
I MONB41l.RH"

\ , , 
Preemergence Surface--Apply this tank mixture after planting, before crop and 
weed emergence and within 5 days after last preplant tillage operation. 
~ference: The "APPLICATION TIMING AND METHODS" section of this label 
provides detailed information and procedures for the application timing and 
method selected. 
NOTE: The maximum application rate of atrazine is 2.5 pounds active ingredient 
per acre per calendar year (2.5 quarts per acre atrazine 4L). On highly 
erodible soils (as defined by the Soil Conservation Service) with less than 30 
percent residue cover, the maximum rate of atrazine is 1.6 pounds active 
ingredient (1.6 quarts per acre of atrazine 4L). On soils not highly erodible 
or on highly erodible soils with more than 30 percent plant residue cover, the 
maximum rate of atrazine is 2 pounds active ingredient per acre (2 quarts per 
acre of atrazine 4L). 
CORN, SOYBEANS' OR MILO (SORGHUM) can be planted the year following use of 
this mixture. 
*There is a possibility of injury due to carryover of atrazine if soybeans or 
other nonlabeled crops are planted the following year. DO NOT plant 
soybeans the year following use of this tank mixture on furrow irrigated 
corn. 
RECOMMENDED RATES: Refer to the following tables for the recommended broadcast 
treatment rates for this tank mixture. Applications which are not consistent 
with recommendations in this label may result in unsatisfactory weed control 
or crop injury. 
Application Rates 
SOIL 
TEXTURAL 
GROUP * 
Coarse**** 
Medium 
Fine 
SOIL 
MON8411. RH~ 
BROADCAST RATE PER ACRE ** 
Less than 3% organic matter 
MON 8411 
(PINTS) 
1.0 
1.0 to 1.5 
1. 0 to 1.5 
+ 
ATRAZlNE 
4L*** 
(QUARTS) 
0.5 
0.75 to 
0.75 to 
to 1. 25 
1. 75 
1. 75 
+ 
BLADEX 
4L*** 
(QUARTS) 
0.5 
1.0 
to 1.5 
to 1.5 
l.5 l. 25 to 
BROADCAST RATE PER ACRE * * 
More than 3% organic matter

TEXTURAL 
GROUP * 
Coarse**** 
Medium 
Fine 
, 
MON 8411 
(PINTS) 
1. 0 to 1.5 
1.25 to 1.75 
1. 5 to 2.0 
ATRAZlNE 
+ 4L*** 
(QUARTS) 
0.5 to 2.0 
1.0 to 2.0 
1.0 to 2.0 
, 
BLADEX 
+ 4L*** 
(QUARTS) 
1.0 to 2.0 
1.5 to 2.0 
1.5 to 2.0 
*Refer to the "SOIL TEXTURE" section of this label to determine the 
corresponding textural group for the soil to be treated. 
**Use the higher rates in the recommended ranges in areas of heavy weed 
infestation. 
***Use rates listed in this label using Bladex and Atrazine 4L formulations. 
Use equivalent rates when using 90% dry flowable formulations. One quart of 
4L formulation equals 1.1 pounds of 90% dry flowable. 
****On coarse-textured soils containing less than 2% organic matter, use 
MON 8411 plUS Bladex only on sandy loam. Do not use on sand and loamy 
sand with less than 2% organic matter. Refer to the "USE RESTRICTIONS" 
section of this label for restrictions. 
NON 8411 plus ATRAZINE plUS PROWL"'" 
(TANK MIXTURE) 
Apply this tank mixture in water or sprayable fluid fertilizer solutions for 
additional control of triazine-resistant lambsquarters and pigweed in addition 
to yellow nutsedge and the annual grasses and broadleaf weeds listed in the 
"WEEDS CONTROLLED" section of this label for MON 8411 plus Atrazine. 
APPROVED APPLICATION SYSTEMS 
Ground--Broadcast boom; banded 
Dry Bulk Fertilizer Impregnatio~ 
Reference: The "APPLICATION SYSTEMS" section of this label provides 
information on the proper application of this tank mixture using the system 
selected. 
APPROVED APPLICATION METHODS 
Preamergence Surfaca--Apply this tank mixture after planting, before crop and 
weed emergence and within 5 days after last preplant tillage operation. 
DO NOT preplant incorporate this tank-mixture as serious crop injury can 
result. 
Reference: The "APPLICATION TIMING AND METHODS" section of this label 
provides detailed information and procedures for the application timing and 
method selected. 
MON8411.RE-i~

} 
, , 
NOTE: The maximum application rate of atrazine is 2.5 pounds active 
ingredient per acre per calendar year (2.5 quarts per acre atrazine 4L). On 
highly erodible soils (as defined by the Soil Conservation Service) with less 
than 30 percent residue cover, the maximum rate of atrazine is 1.6 pounds 
active ingredient (1.6 quarts per acre of atrazine 4L). On soils not highly 
erodible or on highly erodible soils with more than 30 percent plant residue 
cover, the maximum rate of atrazine is 2 pounds active ingredient per acre (2 
quarts per acre of atrazine of 4L). 
CORN, SOYBEANS* OR MILO (SORGHUM) can be planted the year following use of 
this mixture. 
*There is a possibility of injury due to carryover of atrazine if soybeans 
or other nonlabeled crops are planted the following year. DO NOT plant 
soybeans the year following use of this tank mixture on furrow irrigated 
COrn. 
RECOMMENDED RATES: Refer to the following tables for the recommended broadcast 
treatment rates for this tank mixture. Applications which are not consistent 
with recommendations in this label may result in unsatisfactory weed control 
or crop injury. 
Application Rates 
SOIL 
TEXTURAL 
GROUP * 
Coarse 
Medium 
Fine 
SOIL 
TEXTURAL 
GROUP * 
Coarse**** 
MONB411.Rt i l 
BROADCAST RATE PER ACRE ** 
Less than 3% organic matter 
MON 8411® 
(PINTS) 
1.0 
1.0 to 1.5 
1.0 to 1.5 
MON 8411® 
(PINTS) 
1. 0 to 1. 5 
ATRAZINE 
+ 4L*** + PROWL*** 
(QUARTS) (QUARTS) 
0.75 to 2.0 0.75 
1.0 to 2.0 0.75 to 1.0 
1.25 to 2.0 1.0 
BROADCAST RATE PER ACRE * * 
More than 3% organic matter 
+ 
ATRAZINE 
4L*** 
(QUARTS) 
1. 0 to 2.0 
+ PROWL*** 
(QUARTS) 
0.75 to l.0

Medium 
Fine 
, 
1.25 to 1. 75 
1. 5 to 2.0 
1.25 to 2.0 
1.25 to 2.0 
1.0 
1.0 
, 
*Refer to the "SOIL TEXTURE" section of this label to determine the 
corresponding textural group for the soil to be treated. 
-'Use the higher rates in the recommended ranges in areas of heavy weed 
infestation. 
***Use rates listed in this label using Atrazine 4L and Prowl. Use equivalent· 
rates when using Atrazine 90% dry flowable and Prowl 3.3 EC formulations. 
One quart of Atrazine 4L equals 1.1 pounds of Atrazine 90% dry flowable. 
One quart of Prowl equals 1.2 quarts of Prowl 3.3 EC. 
**'*Refer to the "USE RESTICTIONS" section of this label for restrictions. 
MDN 8411 plus BLADEX plus PROWL 
(TANK MIXTURE) 
Apply this tank mixture in water or sprayable fluid fertilizer solutions for 
additional control of triazine-resistant lambsquarters and pigweed in addition 
to yellow nutsedge and the annual grasses and broadleaf weeds listed in the 
"WEEDS CONTROLLED" section of this label for MON 8411 plus Bladex. 
APPROVED APPLICATION SYSTEMS 
Ground--Broadcast boom; banded 
Dry Bulk Fertilizer Impregnation 
Reference: The "APPLICATION SYSTEMS" section of this label provides 
information on the proper application of this tank mixture using the system 
selected. 
APPROVED APPLICATION METHODS 
Preemerqenoa Surface--Apply this tank mixture after planting, before crop and 
weed emergence and within 5 days after last preplant tillage operation. 
DO NOT preplant incorporate this tank-mixture as serious crop injury can 
result. 
Reference: The "APPLICATION TIMING AND METHODS" section of this label 
provides detailed information and procedures for the application timing and 
method selected. 
RECOMMENDED RATES: Refer to the following tables for the recommended broadcast 
treatment rates for this tank mixture. Applications which are not consistent 
with recommendations in this label may result in unsatisfactory weed control 
or crop injury. 
!ol.ON8411.RHl

Application Rates 
SOIL 
TEXTURAL 
GROUP * 
Coarseq 
Medium 
Fine 
SOIL 
TEXTURAL 
GROUP' 
Coarse**** 
Medium 
Fine 
BROADCAST RATE PER ACRE •• 
Less than 3t organic matter 
BLADEX 
MON 8411 + 4L*** 
(PINTS) (QUARTS) 
1.0 1.0 to l.5 
l.0 to 1.5 l.25 to 1.5 
1.0 to 1.5 1.5 to 2.0 
BROADCAST RATE PER ACRE *. 
More than 3% organic matter 
BLADEX 
MON 8411 + 4L*** + 
(PINTS) (QUARTS) 
1. 0 to 1. 5 1.25 to 1.5 
1.25 to 1.75 1.5 to 2.0 
1. 5 to 2.0 2.0 to 2.25 
+ PROWL**· 
(QUARTS) 
0.75 
0.75 
1.0 
PROWL*** 
(QUARTS) 
0.75 to 1.0 
1.0 
1.0 
to 
to 
*Refer to the "SOIL TEXTURE" section of this label to determine the 
corresponding textural group for the soil to be treated. 
1.0 
1.0 
"Use the higher rates in the recommended ranges in areas of heavy weed 
infestation. 
***Use rates listed in this label using Atrazine 4L and Prowl. Use equivalent 
rates when using Atrazine 90% dry flowable and Prowl 3.3 EC formulations. 
One quart of Atrazine 4L equals 1.1 pounds of Atrazine 90% dry flowable. 
One quart of Prowl equals 1.2 quarts of Prowl 3.3 EC. 
****Refer to the "USE RESTRICTIONS' section of this label for restrictions. 
MON84110 RE-l-,Z 
Conservation or Minimum 
Tillage Systems

, 
AT-PLANTING APPLICATIONS 
FIELD CORN, PRODUCTION SEED CORN, 
SILAGE CORN AND POPCORN 
When applied as directed under the conditions described,_ these tank mixtures 
control many emerged annual weeds, suppress many emerged perennial weeds and 
give premergence control of many annual grasses and weeds when corn will be 
planted directly into a cover crop, established sod or in previous crop 
residues. These tank mixtures will not control regrowth from perennial weeds. 
DO NOT APPLY BY AIR. 
Refer to specific product labels for crop rotation restrictions and cautionary 
statements of all products used in these tank mixtures. 
For mixing instructions, see the "MIXING AND SPRAYING INSTRUCTIONS" section Of 
this label. 
MON 8411® and the following tank mixtures can be tank mixed with Roundup, 
Gramoxone Extra and/or 2,4-D. 
[ ] lION 8411 [] 
[ ] lION 8411 plus ATRAZINE [] 
[] lION 8411 plus BLADEX [] 
[] lION 8411 plus EXTRAZINE II [] 
[] lION 8411 plus PRINCEP [] 
[] lION 8411 plus PURSUIT [] 
[] lION 8411 plus ATRAZINE plua BLADEX [] 
[] lION 8411 pl,:,s ATRAZINE plua PRINCEP [] 
Apply these tank mixtures with Roundup Or 2,4-0 (amine or low volatile ester) 
in 10 to 20 gallons of water or 10 to 60 gallons of nitrogen solution per 
acre, or the tank mixtures with Gramoxone Extra in 20 to 60 gallons of water 
or clear liquid fertilizer per acre immediately before, during or after 
planting, but BEFORE CROP EMERGENCE. As density of stubble, crop residue or 
weeds increase, spray gallonage and rate should be increased within the 
recommended ranges to ensure complete coverage. In the absence of emerged 
vegetation, delete the Roundup, Gramoxone Extra or 2,4-0 portion of these 
tank mixtures. 
APPROVED APPLICATION SYSTEMS 
Ground--Broadcast boom 
MON8411.RH,Z

Reference: The "APPLICATION SYSTEMS" section of this label provides 
information on the proper application of this tank mixture using the system 
selected. 
CONTROL OR. SUPPRESSION 
or EMERGED 1IICEIlS 
ATTEN'l'ION 
AVOID DRIFT--EXTREME CARE MUST BE USED WHEN APPLYING THESE TANK MIXTURES TO 
PREVENT INJURY TO DESIRABLE PLANTS AND CROPS. Do not allow spray mist to 
drift since even minute quantities of spray can cause severe damage or 
destruction to nearby crops, plants or other areas on which treatment is not 
intended. Do not apply when winds are gusty or in excess of 5 miles per hour 
or when other conditions, including lesser wind velocities, will allow drift 
to occur. When spraying, avoid combinations of pressure and nozzle type that 
will result in fine particles (mist) which are more likely to drift. 
[ ) [ ) 
Annual Weeds--Apply 1 to 1.5 pints of Roundup herbicide per acre in these tank 
mixtures if weeds are less than 6 inches tall. Use 2 pints of Roundup per 
acre for control of fall panicum, barnyardgrass, crabgrass and shattercane up 
to 2 inches tall; Pennsylvania srnartweed up to 6 inches tall; other annual 
weeds 6 to 12 inches tall. For emerged annual weeds controlled, see the 
"WE:;:DS CONTROLLED" section of the label for Roundup. 
Perennial ~--At normal application dates in minimum tillage systems, 
perennial weeds may not be at the proper stage of growth for control. See the 
"GENERAL INFORMATION" section of the Roundup label for the proper stage of 
growth for perennial weeds. Use of 2 to 4 quarts of Roundup per acre in the 
above mixtures under these conditions provides top kill and reduces 
competition from many emerged perennial grasses and broadleaf weeds. 
For emerged perennial weeds controlled see the "WEEDS CONTROLLED" sectim, of 
the label for Roundup. To obtain control of perennial weeds, follow 
recommendations on the Roundup label for stage of growth and rate of 
application. 
USE OF THIS MIXTURE FOR BERMUDAGRASS OR JOHNSONGRASS CONTROL IS NOT 
RECOMMENDED. 
NOTE: When using these tank mixtures, do not exceed 4 quarts of Roundup 
herbicide per acre. 
Ammonium Sulfate--The addition of ammonium sulfate in the spray solution may 
increase the performance of Roundup tank mixtures on emerged annual weeds 
under adverse growing conditions. When using ammonium sulfate, add 2 percent 
dry ammonium sulfate by weight or 17 pounds per 100 gallons of water. 
Ammonium sulfate should be added to the water in the spray tank and completely 
dissolved prior to adding the herbicide or surfactant. Do not mix ammonium 
sulfate in fluid fertilizer solutions. 
MOS841l.RE"l-" 
41t SI,

) 
) 
I 
If ammoinium sulfate is added directly to the spray tank, add slowly with 
agitation. Adding too quickly may clog outlet lines. Nozzle tip plugging may 
result from the use of low quality ammonium sulfate. To detrmine quality, 
perform a jar test by adding 1/3 cup of ammonium sulfate to 1 gallon of water 
and agitate for one minute. If undissolved sediment is observed, predissolve 
the ammonium sulfate in water and filter prior to adding to the spray tank. 
Surfactants--Nonionic surfactants which are labeled for use with herbicides 
may be used with Roundup. Do not reduce rates of Roundup when adding 
surfactant. Use 0.5 percent surfactant concentration (2 quarts per 100 
gallons of spray solution) when using surfactants which contain at least 50 
percent active ingredient or a 1 percent surfactant concentration (4 quarts 
per 100 gallons of spray solution) for those surfactants containing less than 
50 percent active ingredient. Read and carefully observe surfactant 
cautionary statements and other information appearing on the surfactant label. 
[ ) [ ) 
When used as directed, Gramoxone Extra in a labeled tank mixture controls many 
emerged annual weeds and suppresses many emerged perennial weeds. 
Broadcast Treatment--Apply 1.5 to 3 pints of Gramoxone Extra per acre in these 
tank mixtures immediately before, during or after planting but BEFORE CROP 
EMERGENCE. Use 2 to 2.5 pints when weeds are 3 to 6 inches tall. Use 2.5 to 3 
pints when weeds are 6 inches tall. This mixture may not control weeds taller 
than 6 inches. As density of stubble, crop residue or weeds increases, spray 
gallonage should be increased within the recommended range for complete 
coverage. Add a nonionic spreader surfactant (approved for use on crops) 
containing at least 75 percent surfactant active agent at 8 ounces per 100 
gallons of diluted spray. REFER TO THE GRAMOXONE EXTRA LABEL FOR PRECAUTIONARY 
STATEMENTS. 
[ J 2,4-D [ ) 
When used as directed, 2,4-D in labeled tank mixtures controls many emerged 
annual and perennial broadleaf weeds. For emerged weeds controlled, see the 
"WEEDS CONTROLLED" section of the label for 2,4-D. 
Broadcast Treatment - Apply 1 to 2 pints of 2,4-0 (amine or low-volatile 
ester) in these tank mixtures. Applications should be made 7 to 14 days 
before planting or 3 to 5 days after planting but BEFORE CORN EMERGES. As 
density of stubble, crop residue or weeds increase, spray gallonage should be 
increased within the recommended range for complete coverage. 
DO NOT use 2,4-0 on light, sandy soils, or where soil moisture is inadequate 
for normal weed growth. Observe all precautions and limitations on the 2,4-0 
label booklet. 
[ 1 
For weeds controlled 
label for MON 8411®. 
8411 on various soil 
I MON8411.RE~~ 
PREEMERGENCE WEED CONTROL 
NON 8411 [) 
preemergence, see the "WEEDS CONTROLLED" section of this 
See the following table for recommended rates of MON 
types.

SOIL 
TEXTURAL 
GROUP' 
Coarse*** 
Medium 
Fine 
BROADCAST RATE PER ACRE (PINTS)" 
MON 8411 
1.25 
2.0 
2.5 
to 1.75 
to 2.5 
to 2.75 
*Refer to the "SOIL TEXTURE" section of the label to determine the 
corresponding textural group for the soil to be treated. 
'*Use the higher rates in the recommended ranges in areas of heavy weed 
infestation or when the organic matter content is 3 percent or more. 
*"Refer to the "USE RESTRICTIONS" section of this label for restrictions. 
[ J HaN 8411 plus ATRAZINE 
For weeds controlled preemergence, see the "WEEDS CONTROLLED" section of this 
label for MON B411® plus Atrazine. 
See the following table for recommended rates of MON 8411 plus atrazine in 
this tank mixture on various soil types. 
NOTE: The maximum application rate of atrazine is 2.5 pounds active 
ingredient per acre per calendar year (2.5 quarts per acre atrazine 4L). On 
highly erodible soils (as defined by the Soil Conservation Service) with less 
than 30 percent residue cover, the maximum rate Of atrazine is 1.6 pounds 
active ingredient (1.6 quarts pints per acre of atrazine 4L). On soils not 
highly erodible or on highly erodible soils with more than 30 percent plant 
residue cover, the maximum rate of atrazine is 2 pounds active ingredient per 
acre (2 quarts per acre of atrazine 4L). 
CORN, SOYBEANS* OR MILO (SORGHUM) can be planted the year following use of 
this mixture. 
*There is a possibility of injury due to carryover of atrazine if soybeans 
or other non labeled crops are planted the following year. DO NOT plant 
soybeans the year following use of this tank mixture on furrow irrigated 
corn. 
DO NOT graze treated area or feed treated forage to livestock for 21 
days following application of this tank mixture. 
SOIL 
TEXTURAL 
GROUP * 
MONB411.RE~2 
BROADCAST RATE PER ACRE .* 
MON 8411 
(PINTS) 
+ ATRAZINE 4L*** 
(QUARTS) 
[ J

Coarse··*· 
Medium 
Fine 
1.5 
1.5 
1.75 
to 2.0 
to 2.25 
1.25 to 1.5 
1.5 to 2.0 
1.5 to 2.0 
*Refer to the "SOIL TEXTURE" section of this label to determine the 
corresponding textural group for the soil to be treated. 
'*Use the higher rates in the recommended ranges in areas of heavy weed 
infestation or when the organic matter content is 3 percent or more. 
***Use rates listed in this label when using atrazine 4L. Use equivalent 
rates when using atrazine 90% dry flowable formulations. One quart of 
atrazine 4L equals 1.1 pounds of atrazine 90% dry flowable. 
****Refer to the "USE RESTRICTIONS" section of this label for restrictions. 
[ ) MeN 8411 plus BLADEX [ ) 
For weeds controlled preemergence, see the "WEEDS CONTROLLED" section of the 
label for MON 8411 plus Bladex. 
See the following table for recommended rates of MON 8411 plus Bladex in this 
tank mixture on various soil types. 
BROADCAST RATE PER ACRE ** 
SOIL 
TEXTURAL 
GROUP * 
Coarse - sandy 
loam only··** 
Medium 
Fine 
MON 8411 
(PINTS) 
1.5 
1.5 
1. 75 
to" 2.0 
to 2.25 
+ BLADEX 4L*** 
(QUARTS) 
1.5 
1. 75 
2.0 
to 
to 
to 
2.0 
2.25 
2.5 
*Refer to the "SOIL TEXTURE" section of this label to determine the 
corresponding textural group for the soil to be treated. 
**Use the higher rates in the recommended ranges in areas of heavy weed 
infestation or when the organic matter content is 3 percent or more. 
**'Use rates listed in this label using Bladex 
using Bladex 90% dry flowable formulations. 
1.1 pounds of Bladex 90% dry flowable. 
4L. Use equivalent rates when 
One quart of Bladex 4L equals 
****Refer to the "USE RESTRICTIONS" section of this label for restrictions. 
I MONS411.RE~Z

I 
[ 1 MON 8411 plus EXTRAZINE II [ 1 
For weeds controlled preemergence, see the "WEEDS CONTROLLED" section of the 
label for MON 8411 plus Bladex. 
See the following table for recommended rates of MON 8411 plus Extrazine II in 
this tank mixture on various soil types. 
SOIL 
TEXTURAL 
GROUP * 
Coarse - sandy 
loam only*'k** 
Medium 
Fine 
BROADCAST RATE PER ACRE ** 
MON 8411 
(PINTS) 
1.5 
1.5 
1. 75 
to 2.0 
to 2.25 
+ EXTRAZINE II 4L*** 
(QUARTS) 
1.25 
1.5 
2.0 
to 2.0 
to 2.75 
to 3.0 
*Refer to the "SOIL TEXTURE" section of this label to determine the 
corresponding textural group for the soil to be treated. 
*'use the higher rates in the recommended ranges in areas of heavy weed 
infestation Or when the organic matter content is 3 percent or more. 
**'use rates listed in this label using Extrazine II 4L. Use equivalent rates 
when using Extrazine II 90% dry flowable formulations. One quart of 
Extrazine II 4L equals 1.1 pounds of Extrazine II 90% dry flowable. 
''''Refer to the "USE RESTRICTIONS· section of this label for restrictions. 
[ 1 MON 8411 plus P~CEP [ 1 
For weeds controlled preemergence, see the "WEEDS CONTROLLED" section of this 
label for MON 8411 plus Princep. 
NOTE: LAND TREATED WITH PRINCE!' SHOULD NOT BE PLANTED TO ANY CROP OTHER THAN 
CORN FOR ONE YEAR FOLLOWING TREATMENT AS CROP INJURY MAY OCCUR. AFTER HARVEST 
OF TREATED CROP, PLOW AND THOROUGHLY TILL THE SOIL IN THE FALL OR SPRING TO 
MINIMIZE POSSIBLE INJURY TO SPRING SEEDED ROTATIONAL CROPS. 
See the following table for recommended rates of MON 8411 Princep in this tank 
mixture on various soil types. 
SOIL 
TEXTURAL 
GROUP * 
MON6411.RE-l2, 
BROADCAST RATE PER ACRE * * 
MON 8411 
(PINTS) 
+ PRINCEP 4L*** 
(QUARTS)

Coarse**** 
Medium 
Fine 
1.5 
1.5 
1.75 
to 2.0 
to 2.25 
1.25 to 
1.5 to 
1.5 
1.5 
2.0 
to 2.0 
*Refer to the "SOIL TEXTURE" section of this label to determine the 
corresponding textural group for the soil to be treated. 
**Use the higher rates in the recommended ranges in areas of heavy weed 
infestation or when the organic matter content is 3 percent or more. 
***Use rates listed in this label when using Princep 4L. Use equivalent 
rates when using Princep 90% dry flowable formulations. One quart of 
Princep 4L equals 1.1 pounds of Princep 90% dry flowable. 
**"Refer to the "USE RESTRICTIONS" section of this label for restrictions. 
[ 1 NON 8411 plus PURSUIT [ 1 
For weeds controlled preemergence, see the "WEEDS CONTROLLED" section of this 
label for MON 8411® plus Pursuit. 
NOTE: THIS TANK-MIXTURE IS FOR USE ONLY ON SELECTED FIELD CORN HYBRIDS (IMI­
CORN) WARRANTED BY THE SEED COMPANY TO POSSESS RESISTANCE/TOLERANCE TO DIRECT 
APPLICATION OF PURSUIT (FOR EXAMPLE: PIONEER IR HYBRIDS). DO NOT APPLY 
PURSUIT TO CORN HYBRIDS WHICH LACK GENETIC RESISTANCE/TOLERANCE TO PURSUIT 
HERBICIDE. OBSERVE ALL PRECAUTIONS AND LIMITATIONS ON THE MON 8411 AND 
PURSUIT LABELS BEFORE USE OF THIS TANK MIXTURE INCLUDING PRECAUTIONS ON 
MINIMUM RECROPPING INTERVAL AND ROTATIONAL GUIDELINES. 
See the following table for recommended rates of MON 8411 plus Pursuit in this 
tank mixture on various soil types. 
SOIL 
TEXTURAL 
GROUP' 
Coarse*** 
Medium 
Fine 
BROADCAST RATE PER ACRE " 
MON 8411 
(PINTS) 
1.5 
1.5 
1.75 
to 2.0 
to 2.25 
+ PURSUIT 
(OUNCES) 
4 
4 
4 
*Refer to the "SOIL TEXTURE" section of this label to determine the 
corresponding textural group for the soil to be treated. 
"Use the higher rates in the recommended range in areas of heavy weed 
infestation or when the organic matter content is 3 percent or more. 
**'Refer to the "USE RESTRICTIONS" section of this label for restrictions. 
I MON8411.RE!~

) 
( ) JfON 8411 p1wo A'rRAZINB p1ua BLADEX 
(TANK MIXTURE) 
[J 
This tank mixture may be applied for additional preemergence control of heavy 
weed infestations and/or hard-to-control weeds listed for MON 8411 plus 
atrazine in the "WEEDS CONTROLLED" section of this label. 
DO NOT graze treated area or feed treated forage to livestock for 21 days 
following application of this tank mixture. 
NOTE: The maximum application rate of atrazine is 2.5 pounds active ingredient 
per aCre per calendar year (2.5 quarts per acre atrazine 4L). On highly 
erodible soils (as defined by the Soil Conservation Service) with less than 30 
percent residue cover, the maximum rate of atrazine is 1.6 pounds active 
ingredient (1.6 quarts per acre of atrazine 4L). On soils not highly erodible 
or on highly erodible soils with more than 30 percent plant residue cover, the 
maximum rate of atrazine is 2 pounds active ingredient per acre (2 quarts per 
aCre of atrazine 4L). 
CORN, SOYBEANS' OR MILO (SORGHUM) can be planted the year following use of 
this mixture. 
'There is a possibility of injury due to carryover of atrazine if soybeans 
or other nonlabeled crops are planted the following year. DO NOT plant 
soybeans the year following use of this tank mixture on furrow irrigated 
corn. 
See the following table for recommended rates of MON 8411 plus Atrazine plus 
Sladex in this tank mixture on various soil types. 
SOIL 
TEXTURAL 
GROUP * 
Coarse****" 
Medium 
Fine 
BROADCAST RATE PER ACRE .* 
ATRAZINE BLADEX 
MON 8411 + 4L*** + 4L*** 
(PINTS) (QUARTS) (QUARTS) 
1.5 0.5 to 2.0 1.0 to 2.0 
1.5 to 2.0 1.0 to 2.0 1.5 to 2.0 
1. 75 to 2.25 1.0 to 2.0 1.5 to 2.0 
*Refer to the "SOIL TEXTURE" section of this label to determine the 
corresponding textural group for the soil to be treated. 
*'Use the higher rates in the recommended ranges in areas of heavy weed 
infestation or when the soil organic matter content is 3 percent or more. 
*'*Use rates listed in this label when using Bladex and Atrazine 4L 
formulations. Use equivalent rates when using 90% dry flowable 
formulations. One quart of 4L formulation equals 1.1 pounds of 90% dry 
flowable. 
MON8411.RH,Z

****On coarse-textured soils containing less than 2% organic matter, use 
MON 8411 plus Bladex only on sandy loam. Do not use on sand and 
loamy sand with less than 2% organic matter. Refer to the nUSE 
RESTRICTIONSn section of this label for restrictions. 
[ 1 MON 8411 plus ATRAZINB plus PlUNCEP 
(TANK MIXTURE) 
[ 1 
This tank mixture may be applied for additional preemergence control of heavy 
weed infestations and/or hard-to-control weeds listed for MON 8411 plus 
atrazine in the nWEEDS CONTROLLEDn section of this label. 
DO NOT graze treated area or feed treated forage to livestock for 21 days 
following application of this tank mixture. 
NOTE: The maximum application rate of atrazine is 2.5 pounds active ingredient 
per acre per calendar year (2.5 quarts per acre atrazine 4L). On highly 
erodible soils (as defined by the Soil Conservation Service) with less than 30 
percent residue cover, the maximum rate of atrazine is 1.6 pounds active 
ingredient (1.6 quarts per acre of atrazine 4L). On soils not highly erodible 
or on highly erodible soils with more than 30 percent plant residue cover, the 
maximum rate of atrazine is 2 pounds active ingredient per aCre (2 quarts per 
acre of atrazine 4L). 
NOTE: LAND TREATED WITH PRINCEP SHOULD NOT BE PLANTED TO ANY CROP OTHER THAN 
CORN FOR ONE YEAR FOLLOWING TREATMENT AS CROP INJURY MAY OCCUR. AFTER HARVEST 
OF TREATED CROP, PLOW AND THOROUGHLY TILL THE SOIL IN THE FALL OR SPRING TO 
MINIMIZE POSSIBLE INJURY TO SPRING SEEDED ROTATIONAL CROPS. CORN, SOYBEANS* 
OR MILO (SORGHUM) CAN BE PLANTED THE YEAR FOLLOWING USE OF THIS MIXTURE. 
*There is a possibility of injury due to carryover of atrazine if soybeans or 
other non labeled crops are planted the following year. DO NOT plant 
soybeans the year following use of this tank mixture on furrow irrigated 
corn. 
See the following table for recommended rates of MON 8411 plus Atrazine plus 
Princep tank mixture on various soil types. 
SOIL 
TEXTURAL 
GROUP * 
Coarse**** 
Medium 
Fine 
I MON841l.RE-t" 
BROADCAST RATE PER ACRE * * 
ATRAZINE PRINCEP 
MON 8411 + 4L*** + 4L*** 
(PINTS) (QUARTS) (QUARTS) 
1.5 0.5 to 2.0 0.75 to 1.0 
1.5 to 2.0 1.0 to 2.0 1.0 to 1.5 
1. 75 to 2.25 1.0 to 2.0 1.0 to 1.5

*Refer to the "SOIL TEXTURE" section of this label to determine the 
corresponding textural group for the soil to be treated. 
**Use the higher rates in the recommended ranges in areas of heavy weed 
infestation or when the soil organic matter content is 3 percent or more. 
***Use rates listed in this label when using Princep and Atrazine 4L 
formulatiDns. Use equivalent rates when using 90% dry flowable 
fDrmulatiDns. One quart Df 4L fDrmulatiDn equals 1.1 pDunds Df 90% dry 
flowable. 
****Refer to the "USE RESTRICTIONS" section of this label for restrictions. 
EARLY PREPLAN'!' APPLICATION 
For use in no-till and other conservation tillage systems. 
If emerged weeds are present at the time of treatment, Roundup, Gramoxone 
Extra or 2,4-D should be added tD this product according to the directiDns for 
use on their respective product labels. If unsatisfactory weed control occurs 
(due to excessively dry Dr excessively wet conditions) following the earlier 
application, a postemergence applicatiDn Df an apprDpriate labeled grass 
and/or broadleaf weed herbicide may be used. If a postemergence treatment 
includes the herbicide used early preplant, dD nDt exceed the labeled rate fDr 
corn on a given soil texture. Observe all precautions and limitations on the 
labels for MON 8411, Roundup, and Gramoxone Extra, 2,4-0 and other 
postemergence herbicides before use of these products. 
DO NOT apply tank mixture containing Roundup, Gramoxone Extra or other contact 
herbicides by air. 
MeN 8411 
This product, when applied in a single application or split application will 
provide preemergence contrDl or reduced competition of the annual grasses and 
brDadleaf weeds listed in the "WEEDS CONTROLLED" section of this label. If 
weeds are emerged at time of application, apply a labeled contact herbicide 
with this product. Observe the tiirections for use, precautions and 
restrictions on the label of the contact herbicide. 
APPROVED APPLICATION SYSTEMS 
Ground - Broadcast boom 
Dry Bulk Fertilizer Impregnation 
Reference: The "APPLICATION SYSTEMS" section of this label provides detailed 
information on the application of this product using the system selected. 
RECOMMENDED RATE AND TIMING OF APPLICATION 
Single application--Application of this product should be made less than 30 
days before planting but prior to weed emergence. 
MON8411.ru:>. 4 8t ~~

NOTE: Application on coarse soils should not be made more than two weeks prior 
to planting. 
Split app1ication--Apply 60 percent of the recommended rate as a split 
application prior to weed emergence and no more than 45 days prior to planting 
and the remaining 40 percent at or immediately following planting but before 
crop emergence. 
See the following table for recommended broadcast rates per acre for single 
and split applications. 
SOIL 
TEXTURAL 
GROUP * 
Coarse** 
Medium 
Fine 
BROADCAST RATE PER ACRE (PINTS) 
MON 8411 
1.25 
2.0 
2.5 
to 1.75 
to 2.5 
to 2.75 
*Refer to the "SOIL TEXTURE" section of this label to determine the 
corresponding soil textural group for the soil to be treated. 
**Refer to the "USE RESTRICTIONS" section of this label for restrictions. 
In order to provide broad-spectrum weed control, both single and split 
applications of this product must be followed with a planned postemergence 
application of a labeled broadleaf and/or grass herbicide. Observe the 
directions for use, precautions and restrictions on the label of the 
postemergence herbicide before use of these products. 
If emerged weeds exist at planting, the application of a contact herbicide Or 
tillage is recommended when possible to eliminate existing weeds. 
NON 8411 plus ~INK 
(TANlt MDCTORE) 
This tank mixture, when applied in a single application (alone or in a 3-way 
combination with Bladex or Princep), split application or as a sequential 
application to Bladex or Princep in early preplant programs, will provide 
preemergence control or reduced competition of annual grasses and broadleaf 
weeds listed in the "WEEDS CONTROLLED" section of this label. 
DO NOT graze treated area or feed treated forage to livestock for 21 days 
following application of this·tank mixture. 
NOTE: The maximum application rate of atrazine is 2.5 pounds active ingredient 
per acre per calendar year (2.5 quarts per acre atrazine 4L). On highly 
erodible soils (as defined by the Soil Conservation Service) with less than 30 
percent residue cover, the maximum rate of atrazine is 1.6 pounds active 
ingredient (1.6 quarts per acre of atrazine 4L). On soils not highly erodible 
HONB411.RE~"

) 
or on highly erodible soils with mare than 30 percent plant residue cover, the 
maximum rate of atrazine is 2 pounds active ingredient per acre (2 quarts per 
acre of atrazine 4L). 
CORN, SOYBEANS' OR MILO (SORGHUM) can be planted the year following use of 
this mixture. 
*There is a possibility of injury due to carryover of atrazine if soybeans or 
other nonlabeled crops are planted the following year. DO NOT plant 
soybeans the year following use of this tank mixture on furrow irrigated 
corn, 
APPROVED APPLICATION SYSTEMS 
Ground - Broadcast boom 
Dry Bulk Fertilizer Impregnation 
Reference: The "APPLICATION SYSTEMS" section of this label provides detailed 
information on the application of this product using the system selected. 
RECOMMENDED RATE AND TIMING OF APPLICATION 
Single application--Application of this product should be made less than 30 
days before planting but prior to weed emergence. 
NOTE: Application on coarse soils should not be made more than two weeks prior 
to planting. 
Split application--Apply 60 percent of the recommended rate as a split 
application prior to weed emergence and no more than 45 days prior to planting 
and the remaining 40 percent at or immediately following planting but before 
crop emergence .. 
See the following table for recommended broadcast rates per acre for single 
and split applications. 
SOIL 
TEXTURAL 
GROUP * 
Coarse**** 
Medium 
Fine 
BROADCAST RATE PER ACRE** 
MON 8411 + ATRAZINE 4L*** 
(PINTS) (QUARTS) 
l.5 l.25 to l.5 
l.5 to 2.0 1.5 to 2.0 
l. 75 to 2.25 l.5 to 2.0 
*Refer to the "SOIL TEXTURE" section of this label to determine the 
corresponding soil textural group for the soil to be treated. 
**Use the higher rates in the recommended ranges in areas of heavy weed 
infestation. 
MON8411.RH,Z

) 
***Use rates listed in this label when using atrazine 4L. Use equivalent 
rates when using atrazine 90% dry flowable formulations. One quart of 
atrazine 4L equals 1.1 pounds of atrazine 90% dry flowable. 
****Refer to the "USE RESTRICTIONS" section of this label for restrictions. 
If emerged weeds exist at planting, the application of a contact herbicide or 
tillage is recommended when possible to eliminate existing weeds. 
Sequential application--Application of this tank mixture following Bladex 
should be utilized for the control of fall panicum, crabgrass or broadleaf 
signalgrass. Apply 1.5 to 2 quarts per acre of Bladex or 1 to 1.25 quarts per 
aCre of Princep prior to weed emergence and no more than 45 days prior to 
planting. At or immediately following planting, but before crop emergence, 
apply the recommended rate of this tank mixture. 
NOTE: LAND TREATED WITH PRINCEP SHOULD NOT BE PLANTED TO ANY CROP OTHER THAN 
CORN FOR ONE YEAR FOLLOWING TREATMENT AS CROP INJURY MAY OCCUR. AFTER HARVEST 
OF TREATED CROP, PLOW AND THOROUGHLY TILL THE SOIL IN THE FALL OR SPRING TO 
MINIMIZE POSSIBLE INJURY TO SPRING SEEDED ROTATIONAL CROPS. 
Following application of Bladex or Princep, see the following table for 
recommended rates. 
BROADCAST RATE PER ACRE** 
SOIL 
TEXTURAL MON 8411 + ATRAZINE 4L*** 
GROUP * (PINTS) (QUARTS) 
Coarse**** 1.5 1.25 
Medium 2.0 1.5 
Fine 2.0 to 2.25 1.5 to 2.0 
*Refer to the "SOIL TEXTURE" section of this label to determine the 
corresponding soil textural group for the soil to be treated. 
**Use the higher rates in the recommended ranges in areas Of heavy weed 
infestation. 
***Use rates listed in this label when using atrazine 4L. Use equivalent 
rates when using atrazine 90% dry flowable formulations. One quart of 
atrazine 4L equals 1.1 pounds of atrazine 90% dry flowable. 
****Refer to the "USE RESTRICTIONS" section of this label for restrictions. 
If emerged weeds exist at planting, the application of a contact herbicide or 
tillage is recommended when possible to eliminate existing weeds. 
APPENDIX 
List of common and scientific names of annual grasses and broadleaf weeds. 
I MONB41l.RE-1", 
ANNUAL GRASSES 
SH-

Barnyardgrass 
Echinocloa crus-galli 
Crabgrass 
Digitaria ischaemum 
Digitaria sanguinalis 
Cupgrass, woolly 
Eriochloa villosa 
Foxtail, giant 
Setaria faberi 
Foxtail: green, robust 
purple, robust white 
Setaria viridis 
Foxtail, yellow 
Setaria lutescens 
Goosegrass 
Eleusine indica 
Johnsongrass, seedling 
Sorghum halepense 
Millet, foxtail 
Setaria italica 
Mi.llet, prosQ 
Panicum miliaceum 
Oats, wild 
Avena fatua 
Panicum, brown top 
Panicum fasciculatum 
Panicwn, fall 
Panicum dichotomiflorurn 
Panicum, Texas 
Panicum texanum 
Rice, red 
Oryza sativa 
Sandbur, Grassbur 
Cenchrus incertus 
Shattercane, wildcane 
Sorghum bicolor 
Signalgrass, broadleaf 
Brachiaria platyphylla 
MON8411.RH"

Sprangletop, red 
Leptochloa filiformis 
Wheat, volunteer 
Triticum aestivum 
Witchgrass 
Panicum capillare 
Beggarweed, Florida 
Desmodium tortuosum 
Carpetweed 
Mollugo verticillata 
Cocklebur 
Xanthium strumarium 
Coffeeweed 
Hemp sesbania 
Sesbania exaltata 
Copper leaf, hophornbeam 
Acalypha spp. 
Galinsoga 
Galinsoga spp. 
Groundcherry, annual 
Physalis spp. 
Groundcherry, cutleaf 
Physalis angulata 
Henbit 
Lamium amplexicaule 
Jimsonweed 
Datura stramonium 
Kochia 
Kochia scoparia 
Lambsquarters 
Chenopodium album 
Morningglory: 
Tall 
Ipomoea purpurea 
Pitted 
Ipomoea lacunosa 
Ivyleaf 
Ipomoea hederacea 
Entireleaf 
MONB411.RH" 
ANNUAL BROAD LEAVES

Ipomoea hederacea 
var. intergriuscula 
Smallflower 
Jacquemontia tamnifolia 
Mustard 
Brassica spp. 
Nightshade, black 
Solanum nigrum 
Nightshade, hairy 
Solanum sarrachoides 
Pigweed, Carelessweed 
Amaranthus spp. 
purslane 
Portulaca oleracea 
Pusley, Florida 
Richardia scabra 
Ragweed, common 
Ambrosia artemisiifolia 
Ragweed, giant 
Ambrosia trifida 
Sicklepod 
Cassia obtusifolia 
Sida, prickly; Teaweed 
Sida spinosa 
Smartweed 
Polygonum pensylvanicum 
Polygonum pensicaria 
Starbur, bristly 
Acanthospermum hispidum 
Sunflower, common 
Helianthus annuus 
velvet leaf, Buttonweed 
Abutilon theophrasti 
Waterhemp 
Amaranthus tuberculatos 
Nut sedge , yellow 
Cyperus esculentus 
MONB411.R£.j;" 
SEDGE

®Roundup is a registered trademark of Monsanto Company. 
®Permit is a registered trademark of Monsanto Company. 
~Surface Blend is a trademark of Monsanto Company. 
TMPieeent is a trademark af B. I. eil:lPeflE ele Ueft\6urS 8fH! Cem!9aflY. 
~Agsorb is a trademark of Oil Dri Corporation. 
~Banvel is a trademark of Sandoz, Inc. 
"'Bladex is a trademark of E.I. duPont de Nemours and Company. 
~Clarity is a trademark of Sandoz, Inc. 
TMCentetll! is a traEie!ft6f'k sf l..merieafl C~aflami8: Cem:~anO!. 
"'Extrazine is a trademark of E.I. duPont de Nemours and Company. 
"'Gramoxone is a trademark of a Zeneca Group Company. 
"'MP-79 is a trademark of Eagle Picher Industries. 
NMarksman is a trademark of Sandoz, Inc. 
"'Microcel is a trademark of Manville Products Corporation. 
~Princep is a trademark of Ciba-Geigy Corporation. 
"'Prowl is a trademark of American Cyanamid Company. 
"'Pursuit is a trademark of American Cyanamid Company. 
JVFl:esel .. e is a traaefRBrk af hlterieafl C}anamid CempBn). 
eMONSANTO COMPANY 1995~ 
MONSANTO COMPANY 
'PliO AGfHCUL'PUR:,L GROUP 
ST. LOUIS, MISSOURI 63167 U.S.A. 
I MONS 411 . RE-i"