crop-chem-docs/corpus/epa_ppls/524-549.md

# RD 1617 HERBICIDE

- EPA Reg No: **524-549**
- Registrant: BAYER CROPSCIENCE, LLC
- Signal word: Caution
- Active ingredients: Glyphosate, potassium salt (48.7%)
- Label accepted: 2023-04-06
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000524-00549-20230406.pdf

---
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY 
 WASHINGTON, DC 20460 
OFFICE OF CHEMICAL SAFETY 
AND POLLUTION PREVENTION 
 
Fast Track Label Acceptable v.20220527 
April 6, 2023 
 
Gaganpreet Kaur 
Senior Regulatory Affairs Manager 
Bayer CropScience LP 
800 N. Lindbergh Blvd. 
St. Louis, MO 63167 
 
Subject: Label Amendment – Extend expi ration date of supplemental labels 
 Product Name: RD 1617 Herbicide 
 EPA Registration Number: 524-549 
 Application Date: March 28, 2023 
 Decision Numbers: 591129, 591130, 591131 
 
Dear Gaganpreet Kaur: 
 
The amended label referred to above, submitted in connection with registration under the Federal 
Insecticide, Fungicide, and Rodenticide Act (FIFRA), as amended, is acceptable. This approval 
does not affect any conditions that were previously imposed on this registration. You continue to 
be subject to existing conditions on your registration and any deadlines connected with them. 
 
A stamped copy of your labeling is enclosed for your records. This labeling supersedes all 
previously accepted labeling. You must submit one copy of the final printed labeling before you 
release the product for shipment with the new labeling. In accordance with 40 CFR 152.130(c), 
you may distribute or sell this product under the previously approved labeling for 18 months 
from the date of this letter. After 18 months, you may only distribute or sell this product if it 
bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is 
defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please be 
aware that the website becomes labeling under FIFRA and is subject to review by the Agency. If 
the website is false or misleading, the product would be misbranded and unlawful to sell or 
distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) lists examples of statements 
EPA may consider false or misleading. In addition, regardless of whether a website is referenced 
on your product’s label, claims made on the website may not substantially differ from those 
claims approved through the registration process. Therefore, should the Agency find or if it is 
brought to our attention that a website contains false or misleading statements or claims 
substantially differing from the EPA approved registration, the website will be referred to the 
EPA’s Office of Enforcement and Compliance.

Page 2 of 2 
EPA Reg. No. 524-549 
Decision No. 591129, 591130, 591131 
 
Your release for shipment of the product constitutes acceptance of these conditions. If these 
conditions are not complied with, the registration will be subject to cancellation in accordance 
with FIFRA section 6. 
 
If you have any questions, please contact Emily Schmid by phone at 202-566-2893, or via email 
at schmid.emily@epa.gov. 
 
 
 
 
Enclosure 
 
 
Sincerely, 
 
Emily Schmid, Product Manager 25 
Herbicide Branch 
Registration Division (7505P) 
Office of Pesticide Pro
grams

Supplemental Labeling 524-549 Page 1 of 3
SUPPLEMENTAL LABELING
This supplemental label expires on March 31, 2026 and must not be used or distributed after this date.
READ THE ENTIRE LABEL FOR [INSERT BRAND NAME] BEFORE PROCEEDING WITH THE USE 
DIRECTIONS CONTAINED IN THIS SUPPLEMENTAL LABELING.
Primary Brand Name:
RD 1617 Herbicide
Alternate Brand Name:
Roundup PowerMAX® Herbicide 
EPA Reg. No. 524-549
USE WITH ENLIST E3™ SOYBEAN
Keep out of reach of children
CAUTION
In 
case of an emergency involving this product, call collect, day or night, (314) 694-4000.
DIRECTIONS 
FOR USE
It is a violation of Federal law to use this product in any manner inconsistent with its labeling.
This 
label must be in the possession of the user at the time of herbicide application.
Read 
the label affixed to the [INSERT BRAND NAME] container of before applying. 
Use 
of [INSERT BRAND NAME] according to this labeling is subject to the use precautions and limitations 
imposed by the label affixed to the [INSERT BRAND NAME] container. 
AVOID CONTACT 
 OF HERBICIDE WITH FOLIAGE, GREEN STEMS, EXPOSED NON-WOODY ROOTS 
OR FRUIT OF CROPS, EXCEPT AS DIRECTED FOR USE ON ROUNDUP READY  AND OTHER 
GLYPHOSATE-TOLERANT CROPS, DESIRABLE PLANTS AND TREES, AS SEVERE PLANT INJURY 
OR DESTRUCTION COULD RESULT. 
See “PRODUCT INFORMATION” and “MIXING” sections of the [INSERT BRAND NAME] labeling for 
essential product information.
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence (In-crop); Preharvest; 
Post-Harvest
Maximum Application Rates
Combined total per year for all applications 5.3 quarts per acre
Total for all Preplant, At-Planting, Preemergence applications 3.3 quarts per acre
Total for all In-crop applications from cracking through flowering
(R2 
stage soybean) 64 fluid ounces per acre
Maximum Preharvest application rate 22 fluid ounces per acre
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting Enlist E3 soybean.
4/6/2023
524-549

Supplemental Labeling 524-549 Page 2 of 3
TANK MIXTURES: This product may be tank-mixed with 2,4-D and applied prior to planting only. This 
product may be tank-mixed with one or more products containing the active ingredients listed below and 
applied prior to crop emergence. Refer to the individual label of all products used in the tank mixture for 
approved uses and application rates. Read and follow all label directions. It is the responsibility of the 
pesticide user to ensure that the intended use is included on the label of all products added to a tank 
mixture. Users must follow the most restrictive directions for use and precautionary statements of each 
product in the tank mixture.
acetochlor; carfentrazone-ethyl; 
 chlorimuron ethyl; clethodim; clomazone; cloransulam-methyl; 
dimethenamid; dimethenamid-p; fluazifop-p-butyl; flufenacet; flumetsulam; flumiclorac pentyl ester; 
flumioxazin; fluthiacet-methyl; fomesafen; imazaquin; imazethapyr; lactofen; linuron; metolachlor; 
s-metolachlor; metribuzin; pendimethalin; pyroxasulfone; saflufenicil; quizalofop-p-ethyl;
saflufenacil; sulfentrazone; thifensulfuron; tribenuron methyl; trifluralin
RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant, at-planting and 
preemergence applications combined is 3.3 quarts per acre per season.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be used to control annual grasses and broadleaf weeds in Enlist 
E3 soybean from emergence (cracking) through flowering (R2 stage soybean). R2 stage soybean ends 
when a pod 5 millimeters (3/16 inch) long appears at one of the four uppermost nodes on the main stem 
with a fully developed leaf (R3 stage). Refer to the “ANNUAL WEEDS RATE SECTION” of the [ INSERT 
BRAND NAME] label for application rates for specific annual weeds. 
An initial application of 22 fluid ounces of this product per acre will control or suppress most 2 to 8-inch tall 
weeds, 
which are normally found approximately 2 to 5 weeks after planting. If the initial application is 
delayed and weeds are larger, apply a higher rate of this product. This product may be applied up to 44 
fluid ounces per acre as a single, in-crop application for control of annual weeds and where dense weed 
populations exist.
Application of 
 22 to 44 fluid ounces of this product per acre (single or multiple applications) will control or 
suppress perennial weeds, including bermudagrass, Canada thistle, common milkweed, field bindweed, 
hemp dogbane, horsenettle, marestail (horseweed), nutsedge, quackgrass, rhizome johnsongrass, redvine, 
trumpetcreeper, swamp smartweed and wirestem muhly. For enhanced results, allow perennial weed 
species to achieve at least 6 inches of growth before applying this product.
Under adverse 
 growing conditions, including drought, hail or wind damage, or a poor soybean stand that 
slows or delays canopy closure, a sequential application of this product might be necessary to control late 
flushes of weeds. IN THE SOUTHERN STATES, A SEQUENTIAL APPLICATION OF THIS PRODUCT 
WILL BE REQUIRED TO CONTROL NEW FLUSHES OF WEEDS IN THE ENLIST E3 SOYBEAN CROP. 
To control giant ragweed, apply 22 fluid ounces of this product per acre when the weed is 8 to 12 inches 
tall to increase control and possibly avoid the need for a sequential application.
PRECAUTIONS: In-crop applications 
 made alone or with the addition of other crop chemical products could 
result in a crop response. Contact your seed trait provider for more information.
RESTRICTIONS: The 
 combined total application of this product from crop emergence through harvest must 
not exceed 64 fluid ounces per acre. The maximum rate for any single in-crop application is 44 fluid ounces 
per acre. The maximum combined total amount of this product that may be applied during flowering (R2 
stage soybean) is 44 fluid ounces per acre.
Preharvest
USE INSTRUCTIONS: Up to 22 fluid ounces of this product per acre may be applied to Enlist E3 soybean 
for weed control prior to harvest after pods have set and lost all green color. Take care to avoid excessive 
seed shatter loss due to ground application equipment.
RESTRICTIONS: Allow a 
 minimum of 14 days between application and harvest of soybean grain or feeding 
of soybean grain, forage or hay.

Supplemental Labeling 524-549 Page 3 of 3
Post-Harvest
USE INSTRUCTIONS: This product may be applied for weed control after harvest of Enlist E3 soybean. 
Higher rates might be needed for control of large weeds that were growing in the field at the time of harvest. 
RESTRICTIONS: Application 
 of this product must be made a minimum of 30 days prior to the planting of 
any crop not listed on this label.
Read the “Limit of Warranty and Liability” on the [INSERT BRAND NAME] product labeling before using. 
These 
terms apply to this supplemental labeling. If these terms are not acceptable, return the product 
unopened at once.
[INSERT BRAND NAME] and Roundup Ready are [registered] trademarks of Bayer Group. Enlist 
E3 is a [registered] trademark of Corteva Company.
[YEAR]
BAYER CROPSCIENCE LP
800 N. LINDBERGH BLVD.
ST. LOUIS, MISSOURI 63167
[INSERT DATE]
[PRINT PLATE NUMBER]

Supplemental Labeling 524-549 Page 1 of 3
SUPPLEMENTAL LABELING
This supplemental label expires on March 31, 2026 and must not be used or distributed after this date.
READ THE ENTIRE LABEL FOR [INSERT BRAND NAME] BEFORE PROCEEDING WITH THE USE 
DIRECTIONS CONTAINED IN THIS SUPPLEMENTAL LABELING.
Primary Brand Name:
RD 1617 Herbicide 
Alternate Brand Name:
Roundup PowerMAX® Herbicide
EPA Reg. No. 524-549
USE WITH AGRISURE® GT CORN
Keep out of reach of children
CAUTION
In 
case of an emergency involving this product, Call Collect, day or night, (314) 694-4000.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in any manner inconsistent with its labeling.
This label 
must be in the possession of the user at the time of herbicide application.
Read the 
label affixed to the [INSERT BRAND NAME] container before applying. 
Use of 
[INSERT BRAND NAME] according to this labeling is subject to the use precautions and limitations 
imposed by the label affixed to the [INSERT BRAND NAME] container. 
AVOID CONTACT OF 
 THIS HERBICIDE WITH FOLIAGE, GREEN STEMS, EXPOSED NON-WOODY 
ROOTS OR FRUIT OF CROPS, EXCEPT AS DIRECTED FOR USE ON ROUNDUP READY  AND 
OTHER GLYPHOSATE-TOLERANT CROPS, DESIRABLE PLANTS AND TREES, AS SEVERE PLANT 
INJURY OR DESTRUCTION COULD RESULT. 
See “PRODUCT INFORMATION” and “MIXING” sections of the [INSERT BRAND NAME] labeling for 
essential product information.
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence (In-crop); Spot 
Treatment; Preharvest; Post-Harvest 
Maximum Application Rates
Combined total per year for all applications 5.3 quarts per acre
Total for all Preplant, At-Planting, Preemergence applications 3.3 quarts per acre
Maximum single In-crop application rate up to V8 stage or 30-inch corn 22 fluid ounces per acre
Total for all In-crop applications from emergence through V8 stage or 44 fluid ounces per acre
Maximum Preharvest application rate after maximum kernel fill is 
complete and the crop is physiologically mature (black layer formation) 
until 7 days before harvest
22 fluid ounces per acre
Preplant, At-Planting, Preemergence 
4/6/2023
524-549

Supplemental Labeling 524-549 Page 2 of 3
USE INSTRUCTIONS: This product may be applied alone or in a tank mixture before, during or after 
planting Agrisure GT corn. 
TANK MIXTURES: This product may be tank-mixed with one or more products containing the active 
ingredients listed below. Apply these tank mixtures in 10 to 20 gallons of water, or 10 to 60 gallons of 
nitrogen solution, per acre. Refer to the individual label of all products used in the tank mixture for approved 
uses and application rates. Read and follow all label directions. It is the responsibility of the pesticide user 
to ensure that the intended use is included on the label of all products added to a tank mixture. Users must 
follow the most restrictive directions for use and precautionary statements of each product in the tank 
mixture.
2,4-D; acetochlor; 
 atrazine; bicyclopyrone; carfentrazone-ethyl; clopyralid; dicamba; diflufenzopyr; 
dimethenamid; dimethenamid-P; flufenacet; flumetsulam; flumiclorac pentyl ester; fluthiacet-
methyl; isoxaflutole; linuron; mesotrione; metolachlor; s-metolachlor; metribuzin; pendimethalin; 
pyroxasulfone; rimsulfuron; saflufenacil; simazine; tembotrione; thiencarbazone-methyl
RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant, at-planting and 
preemergence applications combined is 3.3 quarts per acre per season. Application of 2,4-D or dicamba 
must be made a minimum of 7 days prior to planting corn.
NOTE: For maximum weed control, make a postemergence (in-crop) application of this product following 
the 
use of a preemergence residual product listed above.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied alone or in a tank-mix over the top of Agrisure GT corn 
from emergence through the V8 stage (8 leaves with collars), or until corn plant height reaches 30 inches 
(freestanding), whichever comes first, unless otherwise directed. Maximum single in-crop application rate 
of this product is 22 fluid ounces per acre. Total in-crop application of this product from corn plant 
emergence through the V8 stage or 30 inches in height must not exceed 44 fluid ounces per acre. 
When applied as 
 directed, this product will control annual grasses and broadleaf weeds listed on the 
[INSERT BRAND NAME] label. Many perennial grasses and broadleaf weeds will be controlled or 
suppressed with one or more applications of this product. Make a postemergence application of 16 to 22 
fluid ounces of this product per acre before weeds exceed 4 inches in height (before they become 
competitive with the crop). Repeat this application before new flushes of weeds exceed 4 inches in height.
TANK MIXTURES: This 
 product may be tank-mixed with a product containing the active ingredient 
acetochlor or atrazine. Ensure that the product used is labeled for application postemergence (in-crop) to 
field corn. Refer to the individual label of all products used in the tank mixture for approved uses and 
application rates. Read and follow label directions for all products in the tank mixture. It is the responsibility 
of the pesticide user to ensure that the intended use is included on the label of all products added to a tank 
mixture. Users must follow the most restrictive directions for use and precautionary statements of each 
product in the tank mixture.
PRECAUTIONS: In-crop applications 
 made alone or with the addition of other crop chemical products could 
result in a crop response. Contact your seed trait provider for more information. 
RESTRICTIONS: Allow a minimum of 10 days between in-crop applications of this product. Allow a 
minimum of 50 days between application of this product and harvest of corn forage or grain.
Preharvest
USE INSTRUCTIONS: Up to 22 fluid ounces of this product per acre may be applied for annual and 
perennial weed control prior to harvest when kernel fill is complete, and the corn is physiologically mature 
(black layer formed) and grain moisture is 35 percent or less.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest or feeding of corn stover or 
grain. 
Post-Harvest

Supplemental Labeling 524-549 Page 3 of 3
USE INSTRUCTIONS: This product may be applied for weed control after crop harvest. Higher rates might 
be needed for control of large weeds that were growing in the field at the time of harvest. Tank mixtures 
with 2,4-D or dicamba may be used. Ensure that the product used is labeled for post-harvest application 
in field corn. Read and follow label directions for all products in the tank mixture.
RESTRICTIONS: Allow a minimum of 
 7 days between application and harvest or the feeding of vegetation 
within the application area. Application must be made a minimum of 30 days prior to the planting of any 
crop not listed on this label.
Read the “Limit of Warranty and Liability” on the [INSERT BRAND NAME] product labeling before using. 
These terms 
apply to this supplemental labeling. If these terms are not acceptable, return the product 
unopened at once.
[INSERT BRAND NAME] and Roundup Ready are [registered] trademarks of Bayer Group. Agrisure 
is a [registered] trademark of a Syngenta Group Company.
[YEAR]
BAYER CROPSCIENCE LP 
800 N. LINDBERGH BLVD. 
ST. LOUIS, MISSOURI 63167
[INSERT DATE]
[PRINT PLATE NUMBER]

Supplemental Labeling 524-549 Page 1 of 3
SUPPLEMENTAL LABELING
This supplemental label expires on March 31, 2026 and must not be used or distributed after this date.
READ THE ENTIRE LABEL FOR [INSERT BRAND NAME] BEFORE PROCEEDING WITH THE USE 
DIRECTIONS CONTAINED IN THIS SUPPLEMENTAL LABELING.
Primary Brand Name:
RD 1617 Herbicide 
Alternate Brand Name:
Roundup PowerMAX® Herbicide
EPA Reg. No. 524-549
USE WITH GT27 SOYBEAN
Keep out of reach of children
CAUTION
In 
case of an emergency involving this product, call collect, day or night, (314) 694-4000.
DIRECTIONS 
FOR USE
It is a violation of Federal law to use this product in any manner inconsistent with its labeling.
This 
label must be in the possession of the user at the time of herbicide application.
Read 
the label affixed to the [INSERT BRAND NAME] container before applying. 
Use 
of [INSERT BRAND NAME] according to this labeling is subject to the use precautions and limitations 
imposed by the label affixed to the [INSERT BRAND NAME] container. 
AVOID CONTACT 
 OF THIS HERBICIDE WITH FOLIAGE, GREEN STEMS, EXPOSED NON-WOODY 
ROOTS OR FRUIT OF CROPS, EXCEPT AS DIRECTED FOR USE ON ROUNDUP READY  AND 
OTHER GLYPHOSATE-TOLERANT CROPS, DESIRABLE PLANTS AND TREES, AS SEVERE PLANT 
INJURY OR DESTRUCTION COULD RESULT. 
See “PRODUCT INFORMATION” and “MIXING” sections of the [INSERT BRAND NAME] labeling for 
essential product information.
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence (In-crop); Preharvest; 
Post-Harvest
Maximum Application Rates
Combined total per year for all applications 5.3 quarts per acre
Total for all Preplant, At-Planting, Preemergence applications 3.3 quarts per acre
Total for all In-crop applications from cracking through flowering
(R2 
stage soybean) 64 fluid ounces per acre
Maximum Preharvest application rate 22 fluid ounces per acre
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting GT27 soybean.
04/06/2023
524-549

Supplemental Labeling 524-549 Page 2 of 3
TANK MIXTURES: This product may be tank-mixed with 2,4-D and applied prior to planting only. This 
product may be tank-mixed with one or more products containing the active ingredients listed below and 
applied prior to crop emergence. Refer to the individual label of all products used in the tank mixture for 
approved uses and application rates. Read and follow all label directions. It is the responsibility of the 
pesticide user to ensure that the intended use is included on the label of all products added to a tank 
mixture. Users must follow the most restrictive directions for use and precautionary statements of each 
product in the tank mixture.
acetochlor; carfentrazone-ethyl;
 chlorimuron ethyl; clethodim; clomazone; cloransulam-methyl; 
dimethenamid; dimethenamid-p; fluazifop-p-butyl; flufenacet; flumetsulam; flumiclorac pentyl ester; 
flumioxazin; fluthiacet-methyl; fomesafen; imazaquin; imazethapyr; lactofen; linuron; metolachlor; 
s-metolachlor; metribuzin; pendimethalin; pyroxasulfone; saflufenicil; quizalofop-p-ethyl;
saflufenacil; sulfentrazone; thifensulfuron; tribenuron methyl; trifluralin
RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant, at-planting and 
preemergence applications combined is 3.3 quarts per acre per season.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be used to control annual grasses and broadleaf weeds in GT27 
soybean from emergence (cracking) through flowering (R2 stage soybean). R2 stage soybean ends when 
a pod 5 millimeters (3/16 inch) long appears at one of the four uppermost nodes on the main stem with a 
fully developed leaf (R3 stage). Refer to the “ANNUAL WEEDS RATE SECTION” of the [INSERT BRAND 
NAME] label for application rates for specific annual weeds. 
An initial
 application of 22 fluid ounces of this product per acre will control or suppress most 2 to 8-inch tall 
weeds, which are normally found approximately 2 to 5 weeks after planting. If the initial application is 
delayed and weeds are larger, apply a higher rate of this product. This product may be applied up to 44 
fluid ounces per acre as a single, in-crop application for control of annual weeds and where dense weed 
populations exist.
Application of
 22 to 44 fluid ounces of this product per acre (single or multiple applications) will control or 
suppress perennial weeds, including bermudagrass, Canada thistle, common milkweed, field bindweed, 
hemp dogbane, horsenettle, marestail (horseweed), nutsedge, quackgrass, rhizome johnsongrass, redvine, 
trumpetcreeper, swamp smartweed and wirestem muhly. For enhanced results, allow perennial weed 
species to achieve at least 6 inches of growth before applying this product.
Under adverse
 growing conditions, including drought, hail or wind damage, or a poor soybean stand that 
slows or delays canopy closure, a sequential application of this product might be necessary to control late 
flushes of weeds. IN THE SOUTHERN STATES, A SEQUENTIAL APPLICATION OF THIS PRODUCT 
WILL BE REQUIRED TO CONTROL NEW FLUSHES OF WEEDS IN THE GT27 SOYBEAN CROP. To 
control giant ragweed, apply 22 fluid ounces of this product per acre when the weed is 8 to 12 inches tall 
to increase control and possibly avoid the need for a sequential application.
PRECAUTIONS: In-crop applications
 made alone or with the addition of other crop chemical products could 
result in a crop response. Contact your seed trait provider for more information.
RESTRICTIONS: The combined total application of this product from crop emergence through harvest must 
not exceed 64 fluid ounces per acre. The maximum rate for any single in-crop application is 44 fluid ounces 
per acre. The maximum combined total amount of this product that may be applied during flowering (R2 
stage soybean) is 44 fluid ounces per acre.
Preharvest
USE INSTRUCTIONS: Up to 22 fluid ounces of this product per acre may be applied to GT27 soybean for 
weed control prior to harvest after pods have set and lost all green color. Take care to avoid excessive 
seed shatter loss due to ground application equipment.
RESTRICTIONS: Allow a minimum of 14 days between application and harvest of soybean grain or feeding 
of soybean grain, forage or hay.

Supplemental Labeling 524-549 Page 3 of 3
Post-Harvest
USE INSTRUCTIONS: This product may be applied for weed control after harvest of GT27 soybean. Higher 
rates might be needed for control of large weeds that were growing in the field at the time of harvest. 
RESTRICTIONS: Application 
 of this product must be made a minimum of 30 days prior to the planting of 
any crop not listed on this label.
Read the “Limit of Warranty and Liability” on the [INSERT BRAND NAME] product labeling before using. 
These 
terms apply to this supplemental labeling. If these terms are not acceptable, return the product 
unopened at once.
[INSERT BRAND NAME] and Roundup Ready are [registered] trademarks of Bayer Group. GT27 is 
a [registered] trademark of BASF Company.
[YEAR]
BAYER CROPSCIENCE LP 
800 N. LINDBERGH BLVD.
ST. LOUIS, MISSOURI 63167
[INSERT DATE]
[PRINT PLATE NUMBER]