crop-chem-docs/corpus/epa_ppls/5905-505.md

# WEED RHAP LV-4D

- EPA Reg No: **5905-505**
- Registrant: HELENA AGRI-ENTERPRISES, LLC, D/B/A HELENA CHEMICAL COMP
- Signal word: Caution
- Active ingredients: 2,4-D, 2-ethylhexyl ester (65.4%)
- Label accepted: 2005-03-11
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/005905-00505-20050311.pdf

---
5Qo5-SoS to"". oM I /';'005 Fonn Aooro.ad. OMB No. 2070-OO8C • a""'r .. ~~ _.e 'e .J. • no ,.,. ,.._. "."". 
United Stetes §Rogmnat,," 
opp Identifier Number 
&EPA Environmental Protection Agency Amendment 
Wa.hinljton. DC 20480 .... Other 
Application for Pesticide - Section I 
1. CompanylProduct Number 2. EPA Product Maneoer 3. Proposed Classification 
5905-505 o None D Restricted 
4. CompanylProduct (Name) PM' 
Weed Rhap LV-4D 
s. Neme end Addr.ss of Applicant (Include ZIP Cod.) 6. Expedited Reveiw. In accordance with FIFRA Section.3(c)(3) 
Helena Chemical Company (b)(i). my product is similar or identical in composition and labeling 
225 Schilling Boulevard, Suite 300 to: 
Collierville, Tennessee 38017 EPA Reg. No. 
., 
D ChtICk H this is B new eddress Product Name 
Section - II 
0 Amendment - Explain below. 0 
Final printed labels in repsonse to 
NOTIFICATION Agency letter dated 
0 
Rosubmission in response to AgenGY letter dated 
0 
-Me Too· Application. 
MAR 1 I Z005 
0 
Notification - Explain below. 
0 
Other - Explain below. 
Explanation: USB additional page(s) if necessary. fFor section I and Section II.) 
Other Revisions 
Notification of Other Revisions per PR Notice 98-10. This notification is consistent with the provisions of PR Notice 98-10 and EPA regulations at 40 CFR 
152.46. and no other changes have been made to the labeling or the confidential statement of formula of this product. I understand that it is a violation of 18 
U.S.C. Sec. 1001 to willfully make any false statement to EPA. I further understand that if this notification is not oonsistent with the terms of PR Notice 98-10 
and 40 CFR 152.46. this product may be in violation of FIFRA and I may be subject to enforcement action and penalties under sections 12 and 14 of FIFRA. 
Section - III 
1. Meterlel Thill Product Will .. Peck.ged In: 
, 
Child-Resistant Packaging Unit Packaging Water Soluble Packaging 2. Type of Container 
~ve. ~va. 
~ 
Ve. 
~r" 
.... No of No ." Plastic 
No Glaas 
• CertifiCIJtion mUllt If -Yes- No. per If -Yes- No. per Paper 
Unit Packaging wgt. container Packaoa WIjt container Other (Specifyl 
be lIubmitttld 
I 
3. Location of Nat Contents Information 4. SizaCs' Retail Container 5. Location of Lebel Directions 
~ Label l J Container t=:l On Label 
6. Manner in Which Label is Affixed to Product ~Uthooraph 0 Other 
Seff Adhesive P_r~uad , Stenei itd 
Section - IV 
1 . Contact Point (Compl.ts itsms directly below for idtmtmc.tion of indillidulll to be confected, if nBcBsSBrY, to proCtlS$ this BDlllicllti.Jn.) 
Nama Titla Telephone No. (lncluda Are. Code) 
Mandy K. Styles Product Registration Supervisor (901) 7524420 
Certification 6. Oate Appiicl.tion 
I certify that the statements I have made on this fonn and all attachments thereto are true, accurate aOO complete. Prtyved 
I acknowledge that any knowlinglly fela. or misleading statement may be punishable by fine or imprisorvnont or (Stamped, 
both under applicBblelaw. 
2':i2d-Y ~~ 
3. Titla 
Product Registration Supervisor 
4. Typ Nam.-'" 6. Date .' 
Mandy K. Styles 3/1/2005 
.. EPA Form 8570-1 tRev. 3-94) PreVIous .clltions are obsolete. WhIte ' EPA FlIe Copy long"'aI'

WEED RHAP® LV-4D 
2,4·D LOW VOLATILE HERBICIDE 
ACTIVE INGREDIENT: 
2·Ethylhexel Ester of 2,4·Dichlorophenoxyacetic Acid .. ,.. 'l5.4°~ 
INERT INGREDIENTS:"""""" """ " .. " ". " .. "". """" 34.6~1 
TOTAL".""""."" "."."."".""""",,. "."". " 1 00.00% 
Equivalent to 43.4% of 2,4·Dichlorophenoxyacetic Acid or 3.8 
Ibs.lgal. 
Contains Petroleum Distillates 
KEEP OUT OF REACH OF CHILDREN 
CAUTION 
PRECAUTIONARY STATEMENTS 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
CAUTION 
Avoid contact with skin, eyes, or clothing. Harmful if swallowed. 
Avoid inhaling vaporor spray mist. 
FIRST AID 
IFON SKIN · Take off contaminated clothing. 
OR CLOTHING: • Rinse skin immediately with plenty of 
water for 15·20 minutes. 
· Call a poison control center or doctor 
immediately for treatment advice. 
IF SWALLOWED: • Call a poison control center or doctor 
immediately for treatment advice. 
· Do not induce vomiting unless told to 
do so by a poison control center or 
doctor. 
• Have a person sip a glass of water if 
able to swallow. 
· Do not give anything to an unconscious 
or convulsing person. 
IF IN EYES: · Hold eyelid open and rinse slowly and 
gently with water for 15·20 minutes. 
· Remove contact lenses, if present, 
after the first 5 minutes, then continue 
nnsing. 
• Call a poison control center or doctor 
immediately for treatment advice. 
IF INHALED: • Move victim to fresh air. 
· If not breathing, call 911 or an 
ambulance, then give artificial 
respiration, preferably mouth·to·mouth 
if possible. 
HOT LINE NUMBER 
Have the product container or label with you when calling a poison 
control center or doctor or going for treatment. In case of emergency, 
call ChemTrec at 1·800·424·9300. 
i NOTE TO PHYSICIAN 
Contains petroleum distillates - vomiting may cause aspiration 
pnuemonia. 
I SEE INSIDE PANEL FOR ADDITIONAL PRECAUTIONARY STATEMENTS 
EPA REG. NO. 5905·505 
NET CONTENTS: 
MANUFACTURED FOR 
EPA EST. NO. 
HELENA CHEMICAL COMPANY 
225 SCHILLING BOULEVARD, SUITE 300 
COLLIERVILLE, TENNESSEE 38017 
PfR~uNAL PROTECTIVE EQUIPMENT 
.2/1.3 
NOTIFICATIOl': 
MAR 1 1 2005 
"ome "1dterials that are chemical·resistant to this product are listed 
below. If you want more options, follow the instructions for category 
F on an EPA chemical resistance category selection chart: 
Applicators and other handlers must wear: 
Long·sleeved shirt and long pants 
Chemical resistant gloves, such as Barrrier Laminate, Butyl 
Rubber, Nitrile Rubber or Viton. 
Shoes plus socks 
" Protective eyewear 
Chemical·resistant apron when cleaning equipment, mixing 
or loading. 
If this container contains over 1 gallon and less than 5 gallons, 
mixers and loaders who do not use a mechanical system (probe and 
pump) to transfer the contents of this container must wear coveralls 
or a chemical·resistant apron in addition to the other required PPE. 
Follow manufacturer's instructions for cleaning/maintaining PPE. If 
no such instructions for washables, use detergent and hot water. 
Keep and wash PPE separately from other laundry. After each day of 
use, clothing or PPE must not be reused until it has been cleaned. 
Engineering Controls Statements 
If this container contains 5 gallons or more in capacity, do not open 
or pour. A mechanical system (such as a probe and pump or spigot) 
must be used for transferring the contents of this container. If the 
contents of a non·refillable pesticide container are emptied, the probe 
must be rinsed before removal. If the mechanical system is used in a 
manner that meets the requirements listed in the Worker Protection 
Standard (WPS) for agncultural pestiCides [40 CFR 170.240(d)(4)j, 
the handler PPE requirements may be reduced or modified as 
speCified in the WPS. 
When handlers use closed systems, enclosed cabs, or aircraft in a 
manner that meets the requirements listed in the Worker Protection 
Standard (WPS) for agricultural pesticides [40 CFR 170.240(D)(4·6J, 
the handler PPE requirements may be reduced or modified as 
speCified in the WPS. 
USER SAFETY RECOMMENDATIONS 
Users should: 
Wash hands before eating, dnnking, chewing gum, using 
tobacco or using the toilet. 
Remove contaminated clothing immediately if pesticide 
gets inside. Then wash thoroughly and put on clean 
clothing. 
Remove PPE immediately after handling this product. 
Wash the outside of gloves before removing. As soon as 
possible, wash thoroughly and change into clean clothing. 
ENVIRONMENTAL HAZARDS 
This product is toxic to aquatic invertebrates. Drift or runoff may 
adversely affect aquatic invertebrates and nontarget plants. Do not 
contam'lnate water when disposing of equipment washwaters.

Do not apply directly to water or to areas where surface water is 
present or to intertidal areas below the mean high water mark. Do not 
apply when weather conditions favor drift from target area. Spray 
equipment used in applying this product should be thoroughly . 
cleaned before using for any other purpose. Use repeated flushing 
with soap and warm water or suitable chemical cleaner. It is best to 
use a separate sprayer for application of insecticides and fungicides. 
Do not contaminate water by cleaning of equipment or disposal of 
washwaters. This product will kill or seriously injure many desirable 
forms of vegetation. Do not apply directly to flowers, fruits, 
vegetables, grapes, ornamentals, cotton or other desirable plants. Do 
not use when there is hazard from drifting mists. (Coarse sprays are 
less likely to drift.) Vapors from this product may injure susceptible 
plants in the immediate vicinity. Avoid contamination of water used 
for domestic purposes and irrigation purposes. Excessive amounts of 
this product in the soil may temporarily inhibit . 
seed germination and plant growth. 
GROUNDWATER CONTAMINATION 
Most cases of groundwater contamination involving phenoxy 
herbicides such as 2,4-0 have been associated wilh mixing/loading 
and disposal sites. Caution should be exercised when handling 
2,4-0 pesticides at such sites to prevent contamination of 
groundwater supplies. Use of closed systems for mixing or 
transferring this pesticide will reduce the probability of spills. 
Placement of the mixing/loading equipment on an impervious pad to 
contain spills will help prevent groundwater contamination. 
CHEMIGATION PROHIBITION 
Do not apply this product through any type of irrigation system. 
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in a manner 
inconsistent with its labeling. 
Do not apply this product in a way that will contact workers or other 
persons, either directly or through drift. Only protected handlers may 
be in the area during application. For any requirements specific to 
your State or Tribe, consult the agency responsible for pesticide 
regulation. 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the 
Worker Protection Standard, 40 CFR part 170. This Standard 
contains requirements for the protection of agricultural workers on 
farms, forests, nurseries, and greenhouses, and handlers of 
agricultural pesticides. It contains requirements for training, 
decontamination, notification, and emergency assistance. It also 
contains specific instructions and exceptions pertaining to the 
statements on this label about personal protective equipment (PPE) 
and restricted-entry interval. The requirements in this box only apply 
to uses of this product that are covered by the Worker Protection 
Standard. 
Do not enter or allow entry into treated areas during the restricted 
entry interval (REI) of 12 hours. 
PPE required for early entry to treated areas that is permitted under 
the Worker Protection Standard and that involves contact with 
anything that has been treated, such as plan Is, soil, or water is: 
Coveralls 
Chemical-resistant gloves, such as Barrier Laminate, Butyl 
Rubber, Nitrile Rubber or Viton 
Shoes plus socks 
Protective eyewear 
NON-AGRICULTURAL USE REQUIREMENTS 
The requirements in this box apply to uses of this product that are 
NOT within the scope of the Worker Protection Standard'for 
agricultural pesticides (40 CFR Part 170). The WPS applies when 
this product is used to produce agricultural plants on farms, forests, 
nurseries, or greenhouses. 
For Turf Sites (excluding sod farms): Do not allow people (other than 
applicator) or pets on treatment area during application. Do not enter 
treatment areas until sprays has dried. 
STORAGE AND DISPOSAL 
PROHIBITIONS: Do not contaminate water, food, or feed by storage 
or disposal. Open dumping is prohibited. Do not store under 
conditions which might adversely affect the container or its ability to 
function properly. 
STORAGE: Do not store below temperature of 0' F. If frozen, warm 
to 400 F and redissolve before using by rolling or shaking container. 
This product can be stored in an unheated building. Store in a safe 
manner. Store in onginal container only. Keep container tightly 
closed when not in use. Reduce stacking height where local 
conditions can affect package strength. Personnel should use 
clothing and equipment consistent with good pesticide handling. 
PESTICIDE DISPOSAL: Pesticide wastes are toxic. Improper 
disposal of excess pesticide, spray mixture, or rinsate is a violation of 
Federal law and may contaminate groundwater. If these wastes 
cannot be disposed of by use according to label instructions, contact 
your State Pesticide or Environmental Control Agency, or the 
Hazardous Waste representative at the nearest EPA Regional Office 
for guidance. 
CONTAINER DISPOSAL: 
Metal: Triple rinse (or equivalent). Then offer for recycling or 
reconditioning, or puncture and dispose of in a sanitary landfill, or by 
other procedures approved by state and local authorities. 
Plastic: Triple rinse (or equivalent). Then offer for recycling or 
reconditioning, or puncture and dispose of in a sanitary landfill, or by 
incineration, or if allowed by state and local authorities, by burning. If 
burned, stay out of smoke. 
RETURNABLE-REFILABLE CONTAINER (Drum): 
After use, return the container to the point of purchase or deSignated 
locations. This container must only be filled with WEED RHAP® LV-
40. DO NOT RE-USE THIS CONTAINER FOR ANY OTHER 
PURPOSE. Prior to refilling, inspect thoroughly for damage such as 
cracks, punctures, abrasions; and damaged or worn out threads on 
closure devices. Do not refill or transport damaged or leaking 
containers. Check for leaks after refilling and before transportation. 
If the container is not being refilled, return to the point of purchase. 
This product can reach groundwater as a result of mixing and 
loading. To minimize groundwater contamination from spills during 
mixing, loading, and cleaning of equipment, take the following steps:

concrete slab, plastic sheeting) large enough to catch an spilled 
material. If spill occurs, contain the spill by using an absorbent 
material (e.g. sand, earth, or synthetic material). Dispose of the 
contaminated absorbent material by placing in a plastic bag and 
following disposal instructions on the label. 
Cleaning of Equipment: When cleaning equipment, do not pour the 
washwater on the ground; spray or drain over a large area away from 
wells and other water sources. 
GENERAL INFORMATION 
Performance of this product may be affected by local conditions, crop 
varieties, and application method. User should consult local 
extension service, agricultural experiment station, or university weed 
specialists, and state regulatory agencies for recommendations in 
your area. 
Best results are obtained when product is applied to young succulent 
weeds that are actively growing. Application rates lower than 
recommended will be satisfactory on susceptible annual weeds. For 
perennial weeds and conditions such as the very dry area of the 
westem states, where control is difficult, the higher recommended 
rates should be used. 
When product is used for weed control in crops, the growth stage of 
the crop must be considered. 
Some plants and weeds, especially woody varieties, are difficult to 
control and may require repeat applications. Application rates should 
be 2 to 10 gallons of total spray by air or 5 to 25 gallons by ground 
equipment unless otherwise directed. In either case, use the same 
amount of 2,4-0 recommended per acre. For crop uses, do not mix 
with oil, surfactants, or other adjuvants unless specifically 
recommended on label. To do so may reduce herbicide's selectivity 
and could result in crop damage. 
Aerial application should be used only when there is no danger of 
drift to susceptible crops. Many states have regulations concerning 
aerial application of 2,4-0 formulations. Consult local regulatory 
authorities before making applications. Although this product is a low 
Because coarse sprays are less likely to drift than fine, do not use 
equipment (such as hollow cone small orifice nozzles) or conditions 
(such as high pressure) that produce such sprays. 
Product should not be allowed to come into contact with desirable, 
susceptible plants such as beans, cotton, fruit trees, grapes, 
legumes, ornamentals, peas, tomatoes, and other vegetables. 
Product should not be used in greenhouses. Excessive amounts of 
this product in the soil may temporarily inhibit seed germination and 
all plant growth. 
If stored 'below freezing, it may be necessary to warm product to 
400F and agitate before using. This does not affect the efficiency of 
the product. 
Spray equipment used to apply 2,4-0 should not be used for any 
other purpose until thoroughly cleaned with a suitable chemical 
cleaner. 
Spray Preparation: Add the recommended amount of product to 
approximately one-half the volume of water to be used for spraying. 
Agitate well, then add the remainder of the water. Continue agitation 
during application until spray tank is empty. 
Use in Liquid Nitrogen Fertilizer: Product may be combined with 
liquid nitrogen fertilizer suitable for foliage application on corn, grass, 
pastures, or small grains in one operation. Use product according to 
directions on this label for those crops. Use liquid fertilizer at rates 
recommended by supplier or extension service specialist. Mix the 
product and fertilizer according to the following instructions: 
Fill the spray tank approximately 1/2 full with the liquid fertilizer. Add 
the product while agitating the tank. Add the remainder of the liquid 
fertilizer while continuing to agitate. Apply immediately maintaining 
agitation during application until tank is empty. DO NOT APPLY 
DURING COLD (NEAR FREEZING) WEATHER. Spray mixture must 
be used immediately and may not be stored. 
WHERETO USE 
This product is used to control broad-leaved weeds in cereal crops, com, potatoes, soybeans, sorghum, weeds, and brush in rangeland, pastures, 
rights-of-way, and similar noncrop uses. 
WEEDS CONTROLLED 
Product will kill oreontrol the following in addition to many other noxious plants susceptible to 2,4-0: 
alder 
alfalfa 
American lotus 
artichoke, Jerusalem 
aster 
Austrian fieldcress 
beggartick 
biden 
bindweed, hedge 
bindweed, field 
bindweed, European 
Florida pusley 
frenchweed 
ga/insoga 
goatsbeard 
goldenrod 
goosefoot 
ground ivy 
gumweed 
halogeton 
hawkweed 
healall 
hemp 
flixweed primrose 
applications and/or use of higher rate recommended on this product 
label even under ideal conditions for application. Control of pigweeds 
in the High Plains area of Texas and Oklahoma may not be 
satisfactory with this product. 
'Partiall controlled. 
puncturevine 
purslane 
rabbitbrush 
ragweed .. 
rape, wild 
Russian thistle 
sagebrush 
salisfy 
sand shinnery oak 
shepherd's-purse 
sickleped 
smartweed' 
stage. Best results will be obtained when soil moisture is adequate 
for plant growth and weeds are growing well. 
Spring Planted Oats: Use Y, pint per acre in sufficient water to give

bitter wintercress hen bit 
bitterweed hoary cress 
blackeyed susan honeysuckle 
blessed thistle 
blue lettuce Indiana mallow 
blueweed, Texas indigo 
boxelder ironweed 
broomweed jewelweed 
buckbrush jimsonweed 
buckhorn klamathweed 
buckwheat, wild knotweed 
bullthistle kochia' 
bur-ragweed ladysthumb 
burdock lambsquarter 
burhead loco, big bend 
buttercup locoweed 
catnip lupine 
Canada thistle mallow, Venice 
carpetweed manzanita 
catnip marijuana 
chamise many-flowered aster 
Cherokee rose marshelder 
chickweed mexican weed 
chicery milkvetch 
cinquefoil morningglory 
ceastal redstem sage musk thistle 
cockle mustard 
cocklebur nettie 
ceffeebean nutgrass 
ceffeeweed orange hawkweed 
cemmon sowthistle 
cern flower parsnip 
ceyotebrush pennycress' 
creeping jenny pennywort 
croton peppergrass 
curly indigo pepperweed 
dandelion pigweed (hybrid)' 
devil's-claw plantains 
dogbane poison-hemlock 
dogfennel poison ivy' 
elderberry pokeweed 
fan weed poo~oe 
fiddleneck provertyweed 
fleabane (daisy prickly lettuce 
flixweed primrose 
applications and/or use of higher rate recemmended on this product 
label even under ideal cenditions for application. Control of pigweeds 
in the High Plains area ofTexas and Oklahoma may not be 
satisfactory with this product. 
, Partially centrolled. 
CROPS: 
Small Grains Not Underseeded With a Legume (Barley, Oats, 
Wheat, Rye): 
See table for recommended use rates. 
Spray when weeds are small after grain begins tillering but before 
boot stage (usually 4 to 8 inches tall). Do not apply before the tiller 
stage nor from early boot through milk stage. To control large weeds 
that will interfere with harvest or to suppress perennial weeds, 
preharvest treatment can be applied when the grain is in the dough 
sneezeweed 
southern wild rose 
sowthistle 
spanish needles 
St. Johnswort 
starthistle 
stinging nettle 
stinkweed 
sumac 
sunflower 
sweetclover 
tansymustard 
tansyragwort 
tanweed 
tarweed 
thistles 
toadflax 
tumbleweed 
velvetleaf 
vervain 
vetch 
virginia creeper 
vetch 
wild buckwheat 
wild carrot 
wild garlic' 
wild lettuce 
wild mustard 
wild onion' 
wild parsnip 
wild radish 
wild rape 
wild strawberry 
wild sweet potato 
willow 
witchweed 
wormwood 
yellow rocket 
yellow star thistle 
and many other 
broad leaf weeds 
stage. Best results will be obtained when soil moisture is adequate 
for plant growth and weeds are growing well. 
Spring Planted Oats: Use Y, pint per acre in sufficient water to give 
good ceverage. Apply after the fully tiIIered stage, except during the 
boot to dough stage. 
Fall Planted Oats: Apply l'Ho 1 Y. pints per acre with 
recemmended amount of water after full tillering but before early boot 
stage. Some difficult weeds may require higher rates of Y. to 1 Y. 
pints per acre for maximum control, but injury may result. Do not 
spray during or immediately following celd weather. 
Preharvest Treatment: Apply 1 to 2 pints with recommended 
amount of water per acre when grains are in the hard dough stage to 
centrollarge weeds that may interfere with harvest. Best results will

be obtained when soil moisture is sufficient to cause succulent weed 
growth. 
Note: Oats are less tolerant to 2,4-0 than wheat or barley and more 
likely to be injured. Do not forage or graze treated grain fields within 
2 weeks after treatment with 2,4-0. Do not feed treated straw to 
livestock. 
Wheat and Barley: Control of wild garlic and wild onion 
For improved control of difficult weeds including wild garlic and wild 
onion, apply 1 to 2 pints of product per acre. Since these rates may 
injure the crop, do not use unless possible crop damage is 
acceptable. For the higher rates on spring wheat and barley, consult 
your local State Agricultural Experiment Station or Extension Service 
weed specialist for recommendations or suggestions to fit local 
conditions. 
Control of Wild Garlic in Stubble Grain: 
Following the harvest of small grains, and wild garlic often produces 
new fall growth. This should be sprayed with 4 to 6 pints of product in 
10 to 40 gallons of water per acre. This is a useful practice as one 
part of wild garlic control program. Do not plant any crop for three 
months after treatment. Do not forage for 14 days following 
applications. 
Com (Field, Swee~ Pop): See table for recommended use rates. 
Preemergence: Apply product from 3 to 5 days after planting but 
before com emerges. Do not use on very light. sandy soils. Use the 
higher rates on heavy soils. Plant corn as deep as practical. 
Post Emergence: Best results are usually obtained when weeds are 
small and corn is 4 to 18 inches tall. When corn is over 8 inches tall, 
use drop nozzles. Do not apply from tasseling to dough stage. If corn 
is growing rapidly and temperature and soil moisture content is high, 
use Y, pint per acre rate to reduce possibility of crop damage. Delay 
cultivation for 8 to 10 days to prevent stalk breakage due to 
temporary brittleness caused by 2,4-0. Application rates of up to 1 
('/13 
pint per acre may be used to control some hard to control weeds. 
However, the possibility of injury to the corn is increased. 
If corn is over 8 inches tall, use drop nozzles to keep spray off corn 
foliage as much as possible. Do not use with oil, atrazine, or other 
adjuvants. Since the tolerance to 2,4-0 of individual hybrids varies, 
consult your local Extension Service, Agricultural Experiment Station, 
or University Weed Specialist for information. 
Pre-Harvest: After the hard dough or denting stage, apply 1 to 2 
pints per acre by air or ground equipment to suppress perennial 
weeds, decrease weed seed production, and control tall weeds such 
as bindweed, cocklebur, dogbane, jimsonweed, ragweed, sunflower, 
velveUeaf, and vines that interfere with harvesting. Do not forage or 
feed cont fodder to livestock for 7 days following application. 
Post-Harvest: Following the harvest of corn, wild garlic often 
produces new fall growth. This should be sprayed with 2 to 3 quarts 
of product per acre. This is a useful practice as one part of a wild 
garlic control program. Do not forage 7 days following application. 
Do not plant any crop for three months after treatment. 
Sorghum (Milo): See table for recommended rate. 
Apply to sorghum when crop is 4 to 12 inches high with secondary 
roots well established. Use drop nozzles when crop is over 10 inches 
high. Do not apply from flowering to dough stage. Rates of up to 1 
pint per acre may be used to control some hard to control weeds. 
However, the chance of crop injury is increased with the higher rates. 
Do not use with oil. Use lower rate if conditions of high temperature 
and high soil moisture exist. Varieties vary in tolerance to 2,4-0 and 
some hybrids are quite sensitive. Spray only varieties known to be 
tolerant to 2,4-0. Contact seed company or your Agricultural 
Experiment Station or Extension Service weed specialists for this 
information. 
Recommended Rates of Weed Rhap® LV-60 Per Acre
H 
Crop (See Detailed 
Instructions Above) 
Small Grains (Wheat 
Barley, Rye): 
Annual Weeds 
Perennial Weeds 
Preharvest 
Oats: 
Spring 
Fall 
Corn: 
Preemergence 
Postemergence 
Preharvest 
Sorghum (Milo): 
Postemergence 
Rate, Average Rate, Dry Conditions 
Conditions as in Western States' 
Y, to 1 pint 
1 pint 
1 to 2 pints 
Y, pint 
y, to 0/. pint 
1 to 2 quarts 
Y, pint 
1 to 2 pints 
Y, pint 
1 to 2 pints 
1 y. to 2 pints 
y, to 0/. pint 
y, to 0/. pint

'Arizona, Idaho, Montana, Nevada, Oregon, Utah, Washington, Wyoming. 
"If band treatment is used, base the dosage rate on the actual area sprayed. 
RED POTATOES (Grown for fresh market): Property timed 
applications of this product generally enhance red color, aid in 
storage retention of red color, improve skin appearance, increase 
tuber set, and improve tuber size uniformity (fewer jumbos). Crop 
response may vary depending on variety, stress factors, and local 
conditions. Consult willl Agricultural Extension Service and other 
qualified crop advisors for local treatment. Apply 2.3 fl. oz. of this 
product per acre in 5 to 25 gallons of water using ground or aerial 
equipment. The specific spray volume selected should be sufficient 
for good coverage of plants. Make first application when potatoes are 
in lIle pre-bud stage (about 7 to 10 inches high) and make a second 
application about 10 to 14 days later. Do not exceed two applications 
per crop. Do not harvest within 45 days of application. Uneven 
application or mixture with olher pesticides and additives may 
increase the risk of crop injury. 
SOYBEANS (PRE PLANT ONLY): For use in crop residue 
management systems: Apply % to 1 pint per acre not less than 7 
days prior to planting soybeans or 1 to 2 pints per acre not less than 
30 days prior to planting. For best weed control, apply to 
postemergent weeds when small, actively growing, and free of stress 
caused by extremes in climatic conditions, diseases, or insect 
damage. The response of individual weed species is variable. 
Consult your local county agent or state Agricultural Extension 
Service 6r crop consultant for advice. Use the higher rate on larger 
weeds when perennials are present. 
WEEDS CONTROLLED 
alfalfa' 
bindweed' 
bullnettle 
bittercress, smallflowered 
buttercup, smallflowered 
Carolina geranium 
cinquefoil, common & rough 
clover, red' 
cocklebur, common 
dandelion' 
dock,curty 
evening primrose, cutleaf 
gartic, wild 
'Partially controlled 
ironweed 
lambsquarters, common 
lettuce, prickly 
momingglory, annual 
mousetail 
mustard, wild 
onion, wild' 
pennycress, field 
peppergrass' 
plantains 
purslane, common 
ragweed, common 
Apply using air or ground equipment in sufficient gallonage to obtain 
adequate coverage of weeds. Use 2 or more gallons of water per 
acre in aerial equipment and 10 or more gallons of water per acre in 
ground equipment. 
After applying, plant soybean seed as deep as practical or at least 1-
1/2 to 2 inches deep. Adjust the planter press wheel, if necessary, to 
ensure that planted seed is completely covered. 
If desired, this product may be applied preplant to soybeans in tank 
mixtures with other herbicides such as Poast®, Poast® Plus, 
Roundup®, Roundup® D-Pak, Honcho®, Gramoxone® Extra, 
Prowl®, Pursuit® Plus, Scepter® 70DG, Squadrori®, and others that 
are registered for pre plant soybean use. 
Compatible crop oil concentrates, nonionic surfactants, and fluid 
fertilizers approved for use on growing crops may increase the 
herbicidal effectiveness of 2,4-0 on certain weeds and may be added 
to the spray tank. Read and follow all directions and precautions on 
this label and on all labels of adjuvants or fertilizers mixed with this 
product. 
NOTE: Unacceptable injury to soybeans planted in treated fields 
may occur. Whether or not soybean injury occurs and the extent of 
the injury will depend on weather (temperature and rainfall) from 
herbicide application until soybean emergence and agronomic 
factors such as lIle amount of weed vegetation and previous crop 
ragweed, giant 
shepherd's-purse 
smartweed, Pennsylvania' 
sowihistle, annual 
speedwell 
thistle, Canada' 
thistle, bull 
velvetleaf 
vetch, hairy' 
Virginia copperleaf 
residue present. Injury is more likely under cool, rainy conditions and 
where lIlere is less weed vegetation and crop residue present. 
Not registered for use in California. 
USE RESTRICTIONS AND LIMITATIONS 
Do not apply this product prior to planting soybeans if you are not 
prepared to accept the results of soybeans injury, including possible 
loss of stand and yield. 
Do not use on low organic sandy soils (less than 1.0%). 
Do not apply this product when weather conditions such as 
temperature, air inversions, or wind favor drift from treated areas to 
susceptible plants. 
Do not mow or cultivate weeds prior to treating with this product as 
poor control may result. 
Do not use any tillage operations between application and planting. 
Do not feed treated hay, forage, or fodder. Restrict livestock from 
grazing treated fields. Do not feed or graze treated cover crops to 
livestock. 
Only one application may be made prior to planting soybeans per 
growing season.

Do not replant fields treated with this product in the same growing 
season with crops other than those labeled for 2,4-0 use. 
Ornamental Turf, such as Lawns, Golf Courses (Fairways, 
Aprons, Tees and Roughs), Sad Farms, Cemeteries, and Parks: 
Use 1 to 41/5 pints of product in 40 to 180 gallons or enough water 
to give good coverage to one acre on established stands of perennial 
grasses, depending on type of weeds and stage of growth. Usually 4 
pints per acre provides good weed control under average conditions. 
On turf, apply a maximum of4 115 pints of this product per acre per 
application per site. Treat when weeds are young and actively 
growing. Do not apply to newly seeded grasses until well established. 
Use higher rate for hard-ta-kill weeds. Use higher rate when using 
higher volume of water per acre. Do not exceed speCified application 
dosages for any area. Deep-rooted perennial weeds may require 
repeated treatments in the same season or in subsequent years. 
Spray when air temperature is between 500 and 850 F. Avoid 
applying during excessively dry or hot periods unless irrigation 
(watering) is used before treatment. Do not apply if rainfall is 
expected within 48 hours, nor should lawns be irrigated for 48 hours 
following application. For optimum results, turf should not be mowed 
for 1 to 2 days before and after application. Reseed no sooner than 3 
to 4 weeks after application of this product. Adding oil, wetting agent, 
or other surfactant to the spray may be used to increase 
effectiveness on weeds, but doing so may reduce selectivity to turf 
resulting in turf damage. Maximum kill of weeds will be obtained by 
applying in spring and early fall when weeds are actively growing. Do 
not use on golf greens nor on dichondra or other broadleaf 
herbaceous ground covers. Do not use on creeping grasses such as 
bent grass and St. Augustine except for spot spraying. Newly seeded 
turf should not be treated until after the second mowing and the lower 
dosage rate should be used. 
Notes for all Turf Sites (excluding Sad Farms): The maximum 
number of broadcast applications per treatment site is 2 per year. 
Grass Seed Crops: 
Apply 1 to 4 pints per acre of product in the spring or fall to control 
broad leaf weeds in grass being grown for seed. Do not apply from 
early boot to milk stage. Spray seedling grass only after the five leaf 
stage, using 0/.0 to 1 pint per acre to control small seedling weeds. 
After the grass is well established, higher rates of up to 4 pints per 
acre can be used to control hard to kill annual or perennial weeds. 
For best results, apply when soil moisture is adequate for good 
growth. Do not use on bent grass unless injury can be tolerated. 
Keep dairy animals off treated areas for 7 days. Do not cut grass for 
hay for 30 days after treatment. Do not slaughter for meat animals for 
3 days after treatment. 
Fallow Land: 
On established perennial species such as Canada thistle and field 
bindweed, apply up to 3 quarts per acre of product. For annual 
broadleaf weeds, apply 1 to 2 quarts per acre. Do not plant any crop 
for 3 months after treatment or until 2,4-0 has disappeared from soil. 
Established Pastures and Rangelands: 
Use 1 to 4 pints in sufficient water to give good coverage to one acre 
depending on type of weeds and stage of growth. Use only on 
established stands of perennial grasses. Keep dairy animals off 
treated areas for 7 days. Do not cut grass for hay for 30 days after 
treatment. Do not slaughter for meat animals for 3 days after 
treatment. 
Wild Garlic and Wild Onion Control: Apply 4 to 4 1/5 pints of 
product per acre making three applications, fall-spring-fall or spring­
fall-spring, staring in the late fall or early spring. Do not graze dairy 
cattle within 7 days of application. Do not apply this product within 30 
days of cutting grass for hay. Remove meat animals from treated 
areas 3 days prior to slaughter. 
General Weed Control (Airfields, Roadsides, Vacant Lots, Fence 
Rows, Industrial Sites,"and similar areas): 
Use 1 to 3 quarts of product per acre. Apply when most annual 
broadleaf weeds are still young and growing vigorously. Apply when 
perenniat and biennial weeds are actively growing and near the bud 
stage, but before flowering. For best results on tansy ragwort and 
musk thistle, treat in rosette stage, before bolting. A second 
application is usually needed for best results on thistle, nettle, and 
bindweed. Treat wild onion or garlic in early spring and in fall when 
they are young and growing actively. Mix 4 pints of this product in 2 
quarts kerosene or diesel oil, then add this mixture to 100 gallons of 
water. Apply 300 to 500 gallons of spray per acre, depending on the 
stand. The addition of a wetting agent (spray adjuvant) is suggested. 
Usually 2 quarts per acre will give adequate control. Do not use on 
herbaceous ground covers or creeping grass such as bent. Legumes 
will usually be damaged or killed. Deep-rooted perennials may 
require repeat applications. Do not use on freshly seeded turf until 
grass is well established. Delay reseeding for 30 days or until 2,4-0 
has disappeared from soil. 
Bitterweed, Broomweed, Croton, Kochia, Marshelder, Musk 
Thistle and Other Broadleaf Weeds: Use 4 to 4 1/5 pints of this 
product in 10 to 30 gallons of water per acre. If weeds are young and 
growing actively, 2 pints per acre will provide control of some 
species. Deep-rooted perennial weeds may require repeated 
treatments in the same year or in subsequent years. 
Weed Control in Newly Sprigged Coastal Bermudagrass: Apply 2 
Yo to 4 pints of this product in 20 to 100 gallons of water per acre pre­
emergence and/or postemergence. 
Control of Southern Wild Rose: On roadsides and fencerows, use 1 
gallon of this product plus 4 to 8 oz. of a non ionic surfactant, such as 
Induce®, per 100 gallons of water and spray thoroughly as soon as 
foliage is well developed. Two or more treatments may be required. 
On rangeland, apply a maximum of 4 1/5 pints of this product per 
acre pre application per site. 
Spot Treatment in Non·Crop Areas: To control broadleafweeds in 
small areas with a hand or back pack sprayer, use 4 fluid ounces of 
this product per gallon of water and spray to thoroughly wet all 
foliage. 
Grasses in Conservation Reserve Program Areas: To control 
annual broad leaf weeds, apply when weeds are actively growing. 
Use Yo to 1 pint per acre when weeds are small; use higher rates on 
older weeds. Excessive injury may result if applied to young grasses 
with fewer than 6 leaves or prior to grasses being well established. 
To control biennial and perennial broadleafweeds in established 
grasses, apply at a rate of 2 to 4 pints per acre. Apply to actively 
growing weeds. Treat when biennial weeds are in the seedling to

rosette stage and before flower stalks become apparent. Treat 
perennial weeds in the bud to bloom stage. 
NOTE: It is suggested that at least 2 gallons of water per acre by air 
and 5 gallons of water per acre by ground be used. Do not harvest or 
graze treated Conservation Reserve Program areas. Do not apply to 
grasses in the boot to dough stage if grass seed production is 
desired. 
Woody Plant Control: 
To control woody plants susceptible to 2,4-D, such as alder, 
buckbrush, elderberry, sumac, and willow on non-crop areas, use 2 
to 3 quarts of product in 100 gallons of water. Wet all parts of the 
plants thoroughly, including stem and foliage, to the point of runoff. 
Higher volumes of up to 400 gallons per acre are necessary where 
the brush is very dense and over 6 to 8 feet high. Applications are 
more effective when made on actively growing plants. Treatment 
should not be made during time of severe drought or in early fall 
when leaves lose their green color. Hard to control species may 
require re-treatment next season. In general it is better to cut tall 
wood plants and spray sucker growth when 2 to 4 feet tall. 
Sand Shinnery Oak and Sand Sagebrush: On the oak, use 2 pints 
of this product in 5 gallons of oil or in 4 gallons of water plus 1 gallon 
of oil per acre. Apply by aircraft between May 15 and June 15. On 
the sagebrush, use 2 pints in 3 gallons of oil per acre and apply by 
aircraft when foliage is fully expanded and the brush is actively 
growing. 
Big Sagebrush and Rabbitbrush (for pastures and rangelands, 
see note below): Use 2 Y. to 6 pints per acre in 2 to 3 gallons of oil 
or in 3 to 5 gallons of oil-water emulsion spray. For rabbitbrush, the 6 
pints per acre rate is usually required. Brush should be leafed out 
and growing actively when treated. Retreatment may be necessary. 
Chamise, manzanita, buckbrush, coastal sage, coyotebrush and 
certain other chaparral species - use 2 to 6 pints per acre in 5 to 10 
gallons of water. One gallon of fuel oil may be included in the spray 
mixture for added effectiveness. Make applications by aircraft or 
ground equipment to obtain uniform spray coverage. For effective 
control, the brush must be fully leaved out and growing actively when 
sprayed. Retreatment may be needed. Consult state of local brush 
control specialists for most effective rate, volume and timing of spray 
application. 
NOTE: May be applied to pastures and rangeland at a maximum rate 
of 41/5 pints per acre per application per site. 
USES IN FOREST MANAGEMENT 
Conifer Release: 
For control of alder, apply 1 % to 3 quarts of product per acre per site 
in 8 to 25 gallons of water as a foliage spray. Treat when 314 of the 
brush foliage has attained full size leaves and before new conifer 
growth reaches 2' in length. This is usually between early May and 
mid-June. Adjust treatment date depending on stage of growth and 
brush species. This may cause leader deformation on exposed firs, 
but they should overcome this during the second year after spraying. 
For control of susceptible brush species such as Ceanothus spp, 
Chinquapin, madrone, manzanita, oak, tanoak, and similar species to 
release hemlock, spruce, and firs, apply 3 quarts of product per acre 
per site in 8 to 25 gallons of water, just prior to or during budbreak of 
Douglas fir. To control Manzanita and Ceanothus in Ponderosa Pine, 
apply up to 3 quarts per acre before pine growth begins in spring. To 
increase performance, add 2 to 4 quarts of diesel, fuel oil, kerosene, 
or a suitable approved non ionic surfactant at recommended label 
rate. 
After northern conifers, jack pine, red pine, black spruce, and white 
spruce cease growth and "harden off' in late summer, a spray of 1% 
to 3 quarts of product in 8 to 25 gallons of water per acre per site 
may be applied by air to control certain competing hardwood species 
such as alder, aspen, birch, hazel, and willow. Since this treatment 
may cause occasional conifer injury, do not use if such injury cannot 
be tolerated. Consult your regional or extension forester or state 
heribicide specialist for recommendations to fit local conditions. ., 
Tree Injections (Pine Release): To control hardwoods, such as 
Oaks, Hickory, Maple, Pecan, Elm, Sumac, Sweetgum and Hawthorn 
in forest and other noncrop areas, apply undiluted product in a 
concentrate tree injector calibrated to apply 1 ml. per injection. Space 
injections 2" apart, edge to edge, completely around the tree and 
close to the base. The injector bit must penetrate the inner bark. On 
hard-to-kill species, such as Hickory, Dogwood, Red maple, Blue 
beech and Ash, make injections 1 to 1-112 inches apart, edge to 
edge. Treatment may be made at any time of the year. For best 
results, injections should be made during growing season, May 15-
October 15. For dilute injections, mix 1 gallon of product in 19 gallons 
of water. 
Dormant Application (other than Pine): For the control of 
susceptible deciduous brush species, such as alder, cascara, cherry, 
poplar, and serviceberry, apply up to 3 quarts of product per acre in 
sufficient diesel, fuel oil or kerosene for good coverage. Application 
may be made by ground or air and should be made before conifer 
bud break. 
Pine Only: Make application while pine buds are still dormant. Apply 
2 quarts of product per acre in sufficient water for good coverage by 
air or ground equipment. Do not use this application unless some 
pine injury is acceptable. Use of diesel, kerosene, or other oil, or 
addition of surfactants to spray mix may cause unacceptable pine 
injury. 
Christmas Tree Plantations: For control of labeled broad leaf weeds 
in Douglas fir Christmas trees, use 1 to 2 pints of this product per 
acre. Apply over the top of Douglas fir by ground or aerial application, 
e.g., only when the trees are donmant, prior to bud break. Do not 
spray over the top of pine or true firs (Abies spp.) Directed sprays 
may be made to weeds in Christmas tree plantations of all conifer 
species, but the spray must not contact tree foliage as injury may 
occur. Do not apply to weakened, diseased, or stressed seedlings, 
since unacceptable injury may.occur. This product may be mixed 
with Atrazine for Christmas tree application (see Tank Mix section.) 
Heribaceous Weed Control: To control over-wintering susceptible 
weeds, such as false dandelion, klamathweed, plantain, and 
tansyragwort, apply 1 to 3 quarts of product per acre in sufficient 
water for good coverage. Make application at rates and timing 
indicated above if pines are present. For control of hazel brush and 
similar species in the .Lake States area, apply 2 quarts of product per 
acre per site in 8 to 25 gallons of water, when new shoot growth of 
hazel is complete.

Site Preparation: 
(As Dormant Spray) - For control of alder prior to planting seedlings, 
apply 2 to 4 quarts of product per acre in S to 25 gallons of water, 
after alder budbreak but before foliage is 1/4 full size. 
(As Foliage Spray) - For control of alder prior to planting seedlings, 
apply 2 to 3 quarts of product per acre in S to 25 gallons of water, 
after most alder leaves are full size. 
To increase penetration, 2 to 4 quarts per acre of diesel, fuel oil, 
kerosene, or a suitable approved nonionic surfactant at 
recommended label rates may be added to the spray mixture. 
TANK MIXES 
Read and follow the label of each tank mix product used for 
precautionary statements, directions for use, geographic and 
other restrictions. 
CEREAL GRAINS 
Weed Rhap® LV-4D and Buctrll® ME4 for weed control on cereal 
grains (wheat, barley and rye): Buctril® ME4 Broadleaf Herbicide 
will control some annual weeds that are resistant to this product and 
may be tank mixed with Weed Rhap® LV-4D for broader spectrum 
weed control on small grains. In cereal areas except Washington, 
Oregon and Idaho, use Yo to 1 pint of this product plus Yo to 0/. pint of 
Buctril® ME4 per acre. In Washington, Oregon and Idaho: use Yo to 1 
pint of this product plus 0/. to 1 pint Buctril® ME4 per acre. First mix 
the Weed Rhap® LV-6D in water, then add the Buctril® ME4. Use 
the higher rates for larger weeds or where weed growth is slow due 
to dry or cold weather. Apply before weeds are 6 inches high. Use 10 
to 20 gallons total spray volume per acre with ground equipment or 5 
to 10 gallons total spray volume with air application. Use higher 
volume on larger weeds. 
Weed Rhap® LV-4D and Amber® Tank Mix for Control in Wheat, 
Barley, Pastures, Rangeland and Conservation Reserve 
Program Areas: Use Amber® recommended rates and application 
guidelines in combination with Weed Rhap® LV-4D in the following 
applications: 
To control broad leaf weeds beyond optimum treatment size 
for Amber. 
To control broadleaf weeds not listed on the Amber® label. 
To control sulfonylurea resistant weeds. 
For hen bit control, apply with Amber® in early post­
emergent applications. 
Weed Rhap® LV-4D with Banvel® (or Banvel® SGF) and Ally® 
(or ExpresS®) to provide more complete Kochla control: Offers 
quick bumdown. Provides residual activity with Ally to control later 
weed flushes making harvesting easier and reducing post-harvest 
weed control needs. Controls broader weed spectrum while offering 
better control of Russian thistte, mustards, flixweed and wild 
buckwheat. Allow for early treatment Apply S ounces of this product 
with 0.1 ounce of Ally plus either 2 to 3 ounces of Banvel® or 4 to 6 
ounces of Banvel® SGF per acre. The tank mix can be applied to 
winter wheat from the four-leaf stage (tillering) to prior to joint. It can 
be applied to spring wheat from the four~eaf stage through the five­
leaf stage. Growers who want to rotate to a sensitive crop following 
wheat and are concerned about carryover from Ally® can substitute 
ExpresS® in the tank mix which allow crop rotation 60 days after 
application. The recommended rate of ExpresS® is 1/6 ounce 
peracre. 
Weed Rhap® LV-4D and Peak® for Post-emergent Weed Control 
in Grain Sorghum: Use 3 0/. to 7 Yo ounces per acre of Weed Rhap® 
LV-4D in combination with Peak® herbicide. Application should be 
made as a directed spray when sorghum reaches 5-S" or S-24" in 
height. For Applications in Wheat, Barley and Rye: Use the lower 
tank mix rate for Peak® in conjunction with 7 Yo to 12 ounces per 
acre of Weed Rhap® LV-4D to control thistles and field bindweed. 
Application limited to spring after tillering and prior to jointing. For 
Control of Kochia (1-6"), Lambsquarter (1-6"), Morningglories (1-6") 
and Pigweeds (l-S") in Wheat and Fall Seeded Barley: Apply tank 
mix rate of Peak in combination with 7 Yo to 12 ounces per acre of 
Weed Rhap® LV-4D after tillering and prior to jointing, 
Weed Rhap® LV-4D and Finesse® for Post-emergent 
Applications to Control Broadleaf Weeds in Wheat and Barley: 
Combine label recommended use rates of Finesse® with 7 Yo to 15 
ounces per acre of Weed Rhap® LV-4D. Follow all spray application 
guidelines as outlined on the Finesse label. 
SOYBEANS 
Weed Rhap® LV-4D® and Turbo® SEC in reduced-tillage or no­
till systems: Weed Rhap® LV-4D may be applied in combination 
with Turbo® SEC for the control of annual grasses and broadleaf 
weeds and the suppression of emerged perennial weeds when 
soybeans are directly seeded into a stale seedbed, cover crop or in 
previous crop residues. Special precautions: poor weed control 
andlor crop injury may result if directions are not followed. Do not use 
a rib-type press wheel on your no-till planter or crop injury may result. 
Apply at a rate of 2 pints Weed Rhap® LV-4D (1 Lb. a.i.) per acre 
with labeled rates ofTurbo® SEC. Application is recommended 30 
days prior to planting. 
Weed Rhap® LV-4D and Poast® as a bumdown prior to planting 
soybeans: For broad spectrum post-emergence weed control, a tank 
mix application of Weed Rhap® LV-4D with Poasl® may be made for 
control of emerged broadleaf and grass weeds before planting 
soybeans. Apply at a rate of 1 pint this product (1/2 Lb. a.i.) per acre 
with labeled rates of Poasl® up to 30 days prior to planting. 
Weed Rhap® LV-4D with Scepter®, Scepter 70DG or Squadron® 
In preplant applications on no-till soybeans: For broad spectrum 
post-emergence weed control, a tank mix application of Weed 
Rhap® LV-4D with Scepter®, Scepter® 70 DG or Squadron® 
herbicides may be made for the control of emerged broadleaf and 
grass weeds before planting soybeans. Apply at a rate of 1 pint (1/2 
lb. a.i). of this product per acre up to 7 days prior to planting, or 2 
pints (lib. a.i. per acre) up to 30 days prior to planting with labeled 
rates of Scepter®, Scepter® 70DG or Squadron® herbicides. 
Weed Rhap® LV-4D and Sencor® as knockdown herbicides for 
no-till, Weed Rhap® LV-4D with Sencor® DF alone or in 
combination with Dual®, Lasso®, Surflan® or Prowl® may be applied 
as an early preplant surface application for the control of certain 
broadleaf weeds and grasses in soybeans in minimum or no-till 
products. Application is recol1)mended 30 days prior to planting. 
Apply at a rate of 2 pints this product (1 Lb. a.i.) per acre with labeled 
rates of Sencor®. Where grass herbicide is used in tank mix, apply at 
the rates specified on that product's label.

"g"" ... "IIUt'''"' .... - ....... 0.&1 .... .,.~ ... _ ...... ................ ......... ~ ...... •• , ........... ~ .... _ 
Christmas tree plantings: A tank mix of these two producls can be 
used to control weeds and thus aid in establishment of young 
transplants of Douglas fir, grand fir, nobel fir, white fir, Austrian pine, 
bishop pine, Jeffrey pine, Knobcone pine, loblolly pine, lodgepole 
pine, Monterey pine, ponderosa pine, scotch pine, slash pine, blue 
spruce and Sitka spruce. 
The mix should be applied between fall and early spring, preferably 
in February or March, while trees are still dormant, or soon after 
transplanting. Weeds should not be more than 1-1/2 inches high. It 
can be applied with either ground or air equipment. Helicopters have 
been highly effective for reforestation applications or steep terrain. 
Uniform application is the key to good weed control. Use 20 to 40 
gallons of water per acre for ground application. When applying by 
air, use a minimum of 5 gallons of water. Be sure equipment is 
properly calibrated. All screens in the spray system -- nozzles, and 
in-line and suction strainers -- should be 15 mesh or coarser. Use a 
pump with capacity to maintain a nozzle pressure of 35 to 40 psi, and 
sufficient agitation to keep the mixture in suspension in the spray 
tank. If a nurse tank is used, keep the mixture agitated while awaiting 
transfer to the spray tank. Mix 2 to 4 quarts atrazine 4L or 2-112 to 5 
pounds atrazine 80W with 1 to 3 quarts per acre of Weed Rhap® LV-
4D. The actual rate of atrazine used should depend on soil type. 
Scils high in organic matter require higher rates than light to medium 
soils. Band application to Christmas Trees - Calculate the amount to 
be applied per acre. The band width in inches, divided by the rows 
spacing in inches, times the rate per acre for broadcast treatment will 
equal the amount needed per acre for band treatment. For example, 
when treating a 4-foot band over trees planted in rows of 8 feet apart, 
apply 1 Y. to 2 Y. pounds of atrazine per acre. Please read atrazine 
label(s) for additional instructions. 
NON-CROP & WOODY PLANT CONTROL 
Weed Rhap® LV-4D and Garlon®:ID® 4 or Garlon® 3A Tank 
Mixtures for Non-Crop Area: Broadleaf Weed Control: Use 2 to 4 
pints Weed Rhap® LV-4D plus 2 to 6 pints Garlon® 4 or 3 to 8 pints 
Garlon® 3A per acre. For wider spectrum control of broadleaf weeds 
and woody plants, apply as a broadcast spray in enough water to 
deliver 20 to 100 gallons total spray per acre. Apply when broadleaf 
weeds are actively growing. Woody Plant Control - Broadcast Foliar 
Spray: Use 1 to 2 gallons Weed Rhap® LV-4D plus 1-1/2 to 3 quarts 
Garlon® 4 cir 2 to 4 quarts Garlon® 3A per acre. Apply as a 
broadcast spray in enough water to deliver 20 to 100 gallons total 
spray per acre. Apply when woody plants are actively growing. 
Woody Plant Control High Volume Leaf-Stem Treatment with Ground 
Equipment: Use Ho 8 quarts Weed Rhap® LV-4D plus 1-1/2 to 12 
pints Garlon® 4 or 2 to 16 pints Garlon® 3A per acre. Mix 0/. to 2 
quarts product, plus 1-1/2 to 3 pints Garlon® 4 or 2 to 4 pints 
Garlon® 3A in enough water to make 100 gallons of spray. Apply at a 
volume of 100 to 400 gallons of total spray per acre depending on 
size and density of woody plants. Thoroughly wet all leaves, stems, 
and root collars of plants to be controlled. Woody Plant Control 
Aerial Application (Helicopter only): Use 1 to 2 gallons Weed Rhap® 
LV-4D plus 3 to 4 quarts Garlon® 4 or 4 to 6 quarts Garlon® 3A per 
acre. Apply in a total spray volume of 10 to 30 gallons per acre using 
drift control equipment or an effective drift control agent such as Sta­
Put® or Strike Zone®. Use the higher rates and volumes when plants 
are dense or under drought conditions. 
_ ... ,. ••• --- ....... -_. _.--_.-_ ••• ----. --- _.- • 1"' .... - -"-
product per acre plus 1/2 to 1-1/2 pints Banvel®. For wider spectrum 
control of broadleaf weeds and woody plants, apply as a broadcast 
spray in enough water to deliver 20 to 100 gallons total spray per 
acre. Apply when broadleaf weeds are actively growing. Use the 
higher rates when treating dense or tall vegetative growth. Perennial 
and Biennial Broadleaf Weeds: Use 3 to 6 pints this product per acre 
plus 1/2 to 6 pints Banvel®. Apply as a broadcast spray in enough 
water to deliver 20 to 100 gallons total spray per acre. Apply when 
broad leaf weeds are actively growing but prior to flowering. Use the 
lower rates for biennials less than 3 inches rosette diameter. Use the 
higher rate for perennial weeds or for biennial weeds past the 3 inch 
rosette stage. Woody Plant Control Broadcast, High Volume, Stem 
Foliage or Aerial Application: Use 1 to 2 gallons this product per acre 
plus 2 to 8 quarts Banvel®. Apply as a broadcast spray in enough 
water to deliver 20 to 100 gallons total spray per acre or apply as a 
high volume stem foliage spray in enough volume to thoroughly wet 
leaves, stems, and root collars (100 to 400 gallons per acre) or apply 
aerially in enough water to deliver total spray volume of 10 to 30 
gallons per acre using drift control equipment or an effective drift 
control agent such as Sta-Put'" or Strike Zone®. Use the higher 
rates and volumes when plants are dense or under drought 
conditions. 
Tank Mixes of Weed Rhap® LV-4D and Escort@, Oust® or Telar® 
herbicides improve control of some target species and may also be 
tank mixed with these products for post-emergent weed control. Tank 
mixes have shown improved control where resistant bio-types are 
present. 
NOTE: All intended tank mix combinations should be used only in 
recommended areas on the same broadleaf weed species found on 
both labels. For application methods and other use specifications, 
use the most restricted limitations from labeling of both products. 
CONDITIONS OF SALE - LIMITED WARRANTY 
AND LIMITATIONS OF LIABILITY AND REMEDIES 
Read the Conditions of Sale - Warranty and Limitations of 
Liability and Remedies before using this product. If the terms 
are not acceptable, return the product, unopened, and the full 
purchase price will be refunded. 
The directions on this label are believed to be reliable and should be 
followed carefully. Insufficient control of pests and/or injury to the 
crop to which the product is applied may result from the occurrence 
of extraordinary or unusual weather conditions or the failure to follow 
the label directions or good application practices, all of which are 
beyond the control of Helena Chemical Company (the 'Company') or 
seller. In addition, failure to follow label directions may cause injury 
to crops, animals, man or the environment. The Company warrants 
that this product conforms io the chemical description on the label 
and is reasonably fit for the purpose referred to in the directions for 
use subject to the factors noted above which are beyond the control 
of the Company. The Company makes no other warranties or 
representations of any kind, express or implied, concerning the 
product, including no implied warranty of merchantability or fitness for 
any particular purpose, and no such warranty shall be implied by law.

The exclusive remedy against the Company for. any cause of action 
relating to the handling or use of this product shall be limited to, at 
Helena Chemical Company's election, one of the following: 
1. Refund of the purchase price paid by buyer or user for 
product bought, or 
2. Replacement of the product used 
To the extent allowed by law, the Company shall not be liable and 
any and all claims against the Company are waived for special, 
indirect, incidental, or consequential damages or expense of any 
nature, including, but not limited to, loss of profits or income. The 
Company and the seller offer this product and the buyer and user 
accept it, subject to the foregoing conditions of sale and limitation of 
warranty, liability and remedies. 
© Copyright Helena Holding Company, 2005. 
WEED RHAP® and INDUCE® are a registered trademark of Helena 
Holding Company. 
SENCOR® is a registered trademark of Bayer Corporation. 
GARLON® and SURFLAN® is a registered trademark of DowAgro 
Sciences. 
BUCTRIL® is a registered trademark of Aventis Crop Science. 
ESCORT®. OUST®. TELAR®. ALL Y®. and EXPRESS® are 
registered trademarks of E. I. DuPont de Nemours & Co., Inc. 
DUAL®. AMBER®. GRAMOXONE® EXTRA, and PEAK® are 
registered trademarks of Syngenta Crop Protection, Inc. 
ROUNDUP® •• LASSO®. ROUNDUP® D·PAK, and HONCHO® are 
registered trademarks of Monsanto Company. 
BANVEL®. SQUADRON®. SCEPTER®. PURSUIT®. POAST®. and 
PROWL®, is a registered trademark of BASF Ag Products.

March 1, 2005 
HELENA CHEMICAL COMPANY 
225 Schilling Blvd., Suite 300 
Collierville, Tennessee 38017 
Telephone: 901/761-0050 
u.S. Environmental Protection Agency 
Document Processing Desk (NOTIF) 
Office of Pesticide Programs (7504C) 
1801 South Bell Street 
Crystal Mall #2, Room 266A 
Arlington, VA 22202-4501 
RE: Notification to Add Other Revisions 
To Whom It May Concern, 
Enclosed, you will find Helena Chemical Company's Notification for numerous products. 
Helena has updated the copyright company name, all trademarks, and registered trademarks 
from Helena Chemical Company to Helena Holding Company. This has been done on the 
following products: 
Weed Rhap A-40 5905-501 
Weed Rhap A4-MCPA Herbicide 5905-502 
Weed Rhap A-60 Herbicide 2,4-0 Amine 5905-503 
Weed Rhap LV-40 5905-505 
Transvaal Weed Rhap LV-4 MCPA Herbicide 5905-506 
Weed Rhap Low Volatile Granular 0 Herbicide 5905-507 
Weed Rhap LV-60 5905-508 
MCPA Sodium Salt 5905-510 
Setre Carbaryl 80WP Insecticide 5905-517 
Trifluralin 4EC 5905-519 
Par F 70 Soluble Oil 5905-520 
Trifluralin 600 5905-521 
Atrazine 900F 5905-522 
Propanil 600 5905-523 
Copper Z 6/2 Granular Algicide 5905-524 
Chlorothalonil 900 5905-527 
Barrage HF 5905-529 
Allityn Insect Repellent 5905-531 
Trifluralin HFP 5905-532 
Pro-Mate Barricade 0.375% Plus Fertilizer 5905-535 
This should also be noted on all alternate brand names of the master labels. 
In support of these Notifications, you will find the fOllowing: 
EPA Form 8570-1 
1 copy of the revised label highlighted 
If you have any questions, do not hesitate to call me at (901) 752-4420 or by fax at (90; j 
758-1694. Thank you for your assistance in this matter. . 
Sincerely, 
Mandy K. Styles 
Product Registration Supervisor