crop-chem-docs/corpus/epa_ppls/5905-625.md

# HM-1603 Herbicide

- EPA Reg No: **5905-625**
- Registrant: HELENA AGRI-ENTERPRISES, LLC, D/B/A HELENA CHEMICAL COMP
- Signal word: Danger
- Active ingredients: Dicamba (18.28%); 2,4-D (24.62%)
- Label accepted: 2020-10-20
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/005905-00625-20201020.pdf

---
Date of Issuance;EPA Reg. Number:
10/20/205905-625
Term of Issuance:
Conditional
Name of Pesticide Product:
HM-1603 Herbicide
Continued on pa^e 2
Signature of Approving Official: Date:
10/20/20
On the basis of information furnished by the registrant, the above named pesticide is hereby registered
under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA).
Registration is in no way to be construed as an endorsement or recommendation of this product by the
Agency. In order to protect health and the environment, the Administrator, on his motion, may at any
time suspend or cancel the registration of a pesticide in accordance with the Act. The acceptance of any
name in connection with the registration of a product under this Act is not to be construed as giving the
registrant a right to exclusive use of the name or to its use if it has been covered by others.
This product is conditionally registered in accordance with FIFRA section 3(c)(7)(A). You must comply
with the following conditions;
Note: Changes in labeling differing in substance from that accepted in connection with this registration must be submitted to and accepted by the
Registration Division prior to use of the label in commerce. In any correspondence on this product always refer to the above EPA registration number.
NOTICE OF PESTICIDE:
X Registration
__ Reregistration
(under FIFRA, as amended)
U.S. ENVIRONMENTAL PROTECTION AGENCY
Office of Pesticide Programs
Registration Division (7505P)
1200 Pennsylvania Ave., N.W.
Washington, D.C. 20460
Name and Address of Registrant (include ZIP Code):
Bill Washbum
Registration Manager
Helena Agri-Enterprises, LLC
D/B/A Helena Chemical Corp
225 Schilling Blvd., Suite 300
Collierville, TN 38017
Mindy Ondish, Product Manager 23
Herbicide Branch, Registration Division (7505P)
EPA Form 8570-6
Registration Notice Conditional v.20150320
1. Submit and/or cite all data required for registration/reregistration/registration review of your
product under FIFRA when the Agency requires all registrants of similar products to submit such
data.

a. Dicamba GDCI-029801-1659
The alternate brand name, “LATIGO BOLD ” has been added to the product record.
Please also note that the record for this product currently contains the following CSFs:
Enclosure
If you have any questions, you may contact Julia Kerr at 703-347-0386 or via email at
kerr.julia@epa.gov.
You must comply with all of the data requirements within the established deadlines. If you have
questions about the GDCI listed above, you may contact the Chemical Review Manager in the
Pesticide Reevaluation Division: http://iaspub.epa.gov/apex/pesticides/f?p=chemicalsearch:l
2. You are required to comply with the data requirements described in the Generic Data Call-In
(GDCI) identified below:
If you fail to satisfy these data requirements, EPA will consider appropriate regulatory action including,
among other things, cancellation under FIFRA section 6(e). Your release for shipment of the product
constitutes acceptance of these conditions. A stamped copy of the label is enclosed for your records.
3. Submit one copy of the final printed label for the record before you release the product for
shipment.
Should you wish to add/retain a reference to the company ’s website on your label, then please be aware
that the website becomes labeling under FIFRA and is subject to review by the Agency. If the website is
false or misleading, the product would be misbranded and imlawful to sell or distribute under FIFRA
section 12(a)(1)(E). 40 CFR 156.10(a)(5) list examples of statements EPA may consider false or
misleading. In addition, regardless of whether a website is referenced on your product’s label, claims
made on the website may not substantially differ from those claims approved through the registration
process. Therefore, should the Agency find or if it is brought to our attention that a website contains
false or misleading statements or claims substantially differing from the EPA approved registration, the
website will be referred to the EPA ’s Office of Enforcement and Compliance.
• Basic CSF dated 5/22/2019
• Alternate CSF 1 dated 5/22/2019
Page 2 of 2
EPA Reg. No. 5905-625
Decision No. 551335

GROUP HERBICIDE
KEEP OUT OF REACH OF CHILDREN
DANGER/PELIGRO
IF IN EYES:
ACCEPTED
^Herbicide
5905-625
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 1
4
IF
SWALLOWED:
Equivalent to: Dicamba acid equivalent 18.28%, 1.8 Ibs/gal. 2,4-D acid equivalent 24.62%, 2.4 Ibs/gal.
Isomer specific by AOAC Method 6.D01-5 (12th Ed.)
Patent No. 5,877,112, other patents pending.
NET CONTENTS:
AD XXXXXX
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do
not understand the label, find someone to explain it you in detail.).
Manufactured For:
Helena Agri-Enterprises, LLC
225 Schilling Boulevard, Suite 300
Collierville, TN 38017
ACTIVE INGREDIENT(S):
Dicamba acid: 3,6-dichloromethoxybenzoic acid
2,4-D Acid: 2,4-Dichlorophenoxyacetic acid
OTHER INGREDIENTS:
TOTAL
18.28%
24.62%
57.10%
100.00%
Dicamba Acid
2,4-D Acid
EPA REG. NO. 5905-625
EPA EST. NO.
___________________FIRST AID _____________________________________
Hold eye open and rinse slowly and gently with water for 15-20 minutes.
Remove contact lenses, if present, after first 5 minutes, then continue rinsing eye.
Call a poison control center or doctor for treatment advice___________________
Call a poison control center or doctor immediately for treatment advice.
Have a person sip a glass of water if able to swallow.
Do not induce vomiting unless told to do so by a poison control center or doctor.
Do not give anything by mouth to an unconscious or convulsing person.________
NOTE TO PHYSICIAN: Probable mucosal damage may contraindicate the use of gastric lavage._______
HOT LINE NUMBER - Have the product container or label with you when calling a poison control center
or doctor or going for treatment. You may also contact 1-800-424-9300 for emergency medical treatment
information.__________________________________________________________________________
SEE INSIDE PANEL FOR ADDITIONAL PRECAUTIONS AND DIRECTIONS FOR USE
HM-1603 HERBICIDE
(Alternate Brand Name: LATIGO BOLD)
For control of a wide-spectrum of annual, biennial, and perennial broadleaf weeds and brush in Pastures,
Rangeland, and Grass (Hay, Silage); Grass Grown for Seed; Wheat; Sugarcane, Teff, Conservation
Reserve Program land; Certain Non-Crop Areas; General Farmstead Areas; Forest Management; Post
Harvest, Fallow, Crop Stubble and Set Aside Acres
10/20/2020
UrtderlM Federal 1ti8«tic*da. Fungicide
and R%idenlklci« Aei as for Qia
pesticide registered under
EPA Reg. No.

PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
DANGER
PERSONAL PROTECTIVE EQUIPMENT (PPE)
4.
5.
See engineering controls for additional requirements.
ENGINEERING CONTROL STATEMENTS
USER SAFETY RECOMMENDATIONS
ENVIRONMENTAL HAZARDS
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 2
1.
2.
3.
Pilots must use an enclosed cockpit that meets the requirements listed in the WPS for agricultural
pesticides [40 CFR 170.607(e)].
If this container contains over 1 gallon and less than 5 gallons, mixers and loaders who do not use a
mechanical system (probe and pump) to transfer the contents of this container must wear coveralls or a
chemical-resistant apron in addition to the other required PPE.
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables
exist, use detergent and hot water. Keep and wash PPE separately from other laundry. After each day of
use, clothing or PPE must not be re-used until it has been cleaned.
Corrosive. Causes irreversible eye damage. Harmful if swallowed. Do not get in eyes or on clothing.
Wash thoroughly with soap and water after handing and before eating, drinking, chewing gum, using
tobacco, or using the toilet. Prolonged or frequently repeated skin contact may cause allergic reactions in
some individuals.
This pesticide is toxic to fish and aquatic invertebrates. Do not apply directly to water, or to areas where
surface water is present, or to intertidal areas below the mean high water mark. Drift and runoff may be
hazardous to aquatic organisms in water adjacent to treated areas. Do not contaminate water when
disposing of equipment washwaters or rinsate. Apply this product only as directed on label.
Users should:
• Wash hands thoroughly with soap and water after handling and before eating, drinking, chewing
gum, using tobacco or using the toilet.
• Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and change
into clean clothing.
• Users should remove PPE immediately after handling this product. Wash the outside of gloves
before removing. As soon as possible, wash thoroughly and change into clean clothing.
• Have the product container or label with you when calling a poison control center or going for
treatment. You may also contact 1-800-424-9300 for emergency medical treatment.
When handlers use enclosed cabs, or aircraft in a manner that meets the requirements listed in the
Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.607(d-e)]., the handler PPE
requirements may be reduced or modified as specified in the WPS.
All mixers, loaders, applicators, flaggers, and other handlers must wear:
Long-sleeved shirt and long pants.
Shoes and socks.
Chemical resistant gloves (made of Barrier laminate, butyl rubber > 14 mils, neoprene rubber > 14
mils, polyethylene, polyvinyl chloride (PVC) S: 14 mils, or viton > 14 mils
Chemical resistant apron when applying with any handheld nozzle or equipment, mixing or loading,
cleaning up spills or equipment, or otherwise exposed to the concentrate.
Protective eyewear (goggles or face shield)

DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
AGRICULTURAL USE REQUIREMENTS
Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 48 hours.
NON-AGRICULTURAL USE REQUIREMENTS
3
All applicable directions, restrictions, precautions and Conditions of Sale and Warranty are to be followed.
This labeling must be in the user’s possession during application.
Endangered Species Concerns: The use of any pesticide in a manner that may kill or otherwise harm
an endangered species or adversely modify their habitat is a violation of federal law.
Do not apply this product in a way that will contact workers or other persons, either directly or through
drift. Only protected handlers may be in the area during application. For any requirements specific to
your State or Tribe, consult the agency responsible for pesticide regulation.
The requirements in this box apply to uses of this product that are NOT within the scope of the Worker
Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is
used to produce agricultural plants on farms, forests, nurseries, or greenhouses. Do not enter or allow
people (or pets) to enter the treated area until sprays have dried.
Groundwater Contamination; Most cases of groundwater contamination involving phenoxy herbicides
such as 2,4-D have been associated with mixing/loading and disposal sites. Caution should be exercised
when handling 2,4-D pesticides at such sites to prevent contamination of groundwater supplies. Use of
closed systems for mixing or transferring this pesticide will reduce the probability of spills. Placement of
the mixing/loading equipment on an impervious pad to contain spills will help prevent groundwater
contamination.
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR
Part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests,
nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training,
decontamination, notification, and emergency assistance. It also contains specific instructions and
exceptions pertaining to the statements on this label about personal protective equipment (PPE), and
restricted-entry interval. The requirements in this box only apply to uses of this product that are covered
by the Worker Protection Standard.
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and
that involves contact with anything that has been treated, such as plants, soil, or water, is;
1. Coveralls worn over short-sleeved shirt and short pants.
2. Chemical resistant footwear plus socks
3. Chemical resistant gloves made of Barrier laminate, butyl rubber > 14 mils, neoprene rubber > 14
mils, polyethylene, polyvinyl chloride (PVC) S: 14 mils, or Viton > 14 mils).
4. Chemical resistant headgear for overhead exposure.
5. Protective eyewear
USE REQUIREMENTS FOR PASTURES, PERENNIAL GRASSLANDS, GRASS GROWN FOR SEED,
RANGELAND, FALLOW LAND AND NONCROP AREAS: Do not enter treated areas until spray has
dried. For early entry to treated areas, wear eye protection, chemical-resistant gloves made of any
waterproof material, long-sleeved shirt, long pants, shoes and socks.
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc
This chemical has properties and characteristics associated with chemicals detected in groundwater. The
use of this chemical in areas where soils are permeable, particularly where the water table is shallow,
may result in groundwater contamination. Application around a cistern or well may result in
contamination of drinking water or groundwater.
Notify workers of application by warning them orally and by posting warning signs at entrances to treated
area.

RESISTANCE MANAGEMENT
To delay herbicide resistance, take one or more of the following steps:
PRODUCT INFORMATION
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 4
If a weed pest population continues to progress after treatment with this product, discontinue use
of this product, and switch to another management strategy or herbicide with a different mode of
action, if available.
For further information or to report suspected resistance, contact Helena Agri-Enterprises, LLC
representatives at (901) 761-0050.
Rotate the use of HM-1603 HERBICIDE or other Group 4 herbicides within a growing season
sequence or among growing seasons with different herbicide groups that control the same weeds
in a field.
HM-1603 HERBICIDE is a postemergence herbicide for controlling a wide spectrum of annual, biennial,
and perennial broadleaf weeds and brush in pastures, rangeland, and grass (hay, silage): grass grown for
seed; sugarcane; teff; wheat; conservation reserve program land; postharvest, fallow, crop stubble, set-
aside acres; general farmstead areas; certain noncrop areas; and for forest management.
• Adopt an integrated weed-management program for herbicide use that includes scouting and
uses historical information related to herbicide use and crop rotation, and that considers tillage (or
other mechanical control methods), cultural (e.g., higher crop seeding rates; precision fertilizer
application method and timing to favor the crop and not the weeds), biological (weed-competitive
crops or varieties) and other management practices.
For resistance management, HM-1603 HERBICIDE is a Group 4 mode of action herbicide containing 2,4-
D acid and dicamba acid. Any weed population may contain or develop plants naturally resistant to HM-
1603 HERBICIDE and other Group 4 mode of action herbicides. The resistant biotypes may dominate the
weed population if these herbicides are used repeatedly in the same field. Appropriate resistance
management strategies should be followed.
• Contact your local extension specialist or certified crop advisors for additional pesticide
resistance-management and/or integrated weed-management recommendations for specific
crops and weed biotypes.
Use tank-mixtures with herbicides from a different group if such use is permitted: where
information on resistance in target weed species is available, use the less resistance-prone
partner at a rate that will control the target weed(s) equally as well as the more resistance-prone
partner. Consult your local extension service or certified crop advisor if you are unsure as to
which active ingredient is currently less prone to resistance.
• Scout after herbicide application to monitor weed populations for early signs of resistance
development. Indicators of possible herbicide resistance include; (1) failure to control a weed
species normally controlled by the herbicide at the dose applied, especially if control is achieved
on adjacent weeds; (2) a spreading patch of non-controlled plants of a particular weed species;
(3) surviving plants mixed with controlled individuals of the same species. If resistance is
suspected, prevent weed seed production in the affected area by an alternative herbicide from a
different group or by a mechanical method such as hoeing or tillage. Prevent movement of
resistant weed seeds to other fields by cleaning harvesting and tillage equipment when moving
between fields, and planting clean seed.

Mode of Action
APPLICATION INSTRUCTIONS
CHEMIGATION PROHIBITION
Do not apply this product through any type of irrigation system.
Spray Coverage:
Sensitive Crop Precautions:
SPRAY DRIFT MANAGEMENT
Droplet Size
5
Weeds must be thoroughly covered with spray. Dense leaf canopies shelter smaller weeds and prevent
adequate spray coverage.
A variety of factors including weather conditions (e.g. wind direction, wind speed, temperature, relative
humidity) and method of application {e.g., ground, and aerial) can influence pesticide drift. The applicator
must evaluate all factors and make appropriate adjustments when applying this product.
For best results, thoroughly clean sprayer equipment (tank, lines and nozzles) immediately after use by
flushing system with water and heavy duty detergent or other suitable tank cleaner.
Apply HM-1603 HERBICIDE at the rates and growth stages listed in Tables 1 and 2 as follows unless
instructed differently by section on “Food/Feed Crop Specific Information” or “Non-Food/Feed Use (Land
not Harvested, Grazed or Foraged)-Specific Information.” HM-1603 HERBICIDE may be applied using
water or sprayable fluid fertilizer as a carrier. Sprayable fluid fertilizer may be used as the carrier in
preplant or pre-emergence use for all crops listed on this label. Postemergence uses with sprayable fluid
fertilizer may be made on pasture, hayland, or wheat crops only. The most effective application rate and
timing varies based on the target weed species (refer to Table I). In mixed populations of weeds the
correct rate is determined by the weed species requiring the highest rate. Delaying application permits
weeds to exceed the maximum size and will prevent adequate control. For certain specified applications
liquid fertilizer or oil may replace part or all of the water as diluent. If dry flowable (DF), wettable powder
(WP) or flowable (F) tank mix products are to be used, these should generally be added to the spray tank
first. Refer to the mixing directions on the labels of the tank mix products.
HM-1603 HERBICIDE may cause injury to desirable trees and plants, particularly beans, cotton, flowers,
fruit trees, grapes, ornamentals, peas, potatoes, soybeans, sunflowers, tobacco, tomatoes and other
broadleaf plants when contacting their roots, stems or foliage. At high temperatures (about 85 degrees or
higher), vapors from this product may cause injury to the aforementioned susceptible crops. These plants
are most sensitive to HM-1603 HERBICIDE during their development or growing stage. Do not treat
areas where either possible downward movement into the soil or surface washing may cause contact of
HM-1603 HERBICIDE with the roots of desirable trees and shrubs.
Irrigation: In irrigated areas, it may be necessary to irrigate before treatment to ensure active weed
growth.
When applying sprays that contain 2,4-D as the sole active ingredient, or when applying sprays that
contain 2,4-D mixed with active ingredients that require a coarse or coarser spray, apply only as a coarse
or coarser spray (ASABE standard 572) or a volume mean diameter of 385 microns or greater for
spinning atomizer nozzles.
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc
HM-1603 HERBICIDE contains two active ingredients uniquely formulated to be used alone or tank mixed
with other listed products as well as liquid fertilizer solutions. HM-1603 HERBICIDE is readily absorbed
by plants through shoot and root uptake, translocates throughout the plant’s system, and accumulates in
areas of active growth. HM-1603 HERBICIDE interferes with the plant’s growth hormones (auxins)
resulting in death of many broadleaf weeds.

Wind Speed
Temperature Inversions
Susceptible Plants
Other State and Local Requirements
Equipment
Table 1. Application Rate and Timing - Annual Weeds
1/3 pints 1 pints 2 pints
1-3" after branching
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 6
Applicators must follow all state and local pesticide drift requirements regarding application of 2,4-D
herbicides. Where states have more stringent regulations, they must be observed.
All aerial equipment and ground application equipment must be properly maintained and calibrated using
appropriate carriers or surrogates.
Applicators must follow maximum application rates in the Use Specific Information sections of the label.
For use in non-food/feed crops only: the addition of liquid fertilizer (28-0-0, 32-0-0) solutions at 14 the
GPA spray solution has shown to give increased efficacy.
For aerial equipment, the boom length must not exceed 75% of the wingspan or 90% of the rotor blade
diameter.
Release spray at the lowest height consistent with efficacy and flight safety. Do not release spray at a
height greater than 10 feet above the crop canopy unless a greater height is required for aircraft safety.
This requirement does not apply to forestry or rights-of-way applications.
If applying at wind speeds less than 3 mph, the applicator must determine if: a) conditions of temperature
inversion exist, or b) stable atmospheric conditions exist at or below nozzle height. Do not make
applications into areas of temperature inversions or stable atmospheric conditions.
When applying sprays that contain 2,4-D mixed with other active ingredients that require a medium or
more fine spray, apply only as a medium or coarser spray (ASABE standard 572) or a volume mean
diameter of 300 microns or greater for spinning atomizer nozzles.
Do not apply under circumstances where spray drift may occur to food, forage, or other plantings that
might be damaged or crops thereof rendered unfit for sale, use or consumption. Susceptible crops
include, but are not limited to cotton, okra, flowers, grapes (in growing stage), fruit trees (foliage),
soybeans (vegetative stage), ornamentals, sunflowers, tomatoes, beans, and other vegetables, or
tobacco. Small amounts of spray drift that might not be visible may injure susceptible broadleaf plants.
When applications are made in a crosswind, the swath will be displaced downwind. The applicator must
compensate for this by adjusting the path of the aircraft upwind.
Do not apply at wind speeds greater than 15 mph. Only apply this product if the wind direction favors on-
target deposition and are not sensitive areas (including, but not limited to, residential areas, bodies of
water, known habitat for nontarget species, nontarget crops) within 250 feet downwind. If applying a
Medium spray, leave one swath unsprayed at the downwind edge of the treated field.
For ground boom application, do not apply with a nozzle height greater than 4 feet above the crop
canopy.
Weeds Controlled
(including ALS - and
tri azine-resistant)
Beebalm, Spotted
Broomweed
Rate Per Acre (according to weed growth stage)
2/3 pints
3"
branching
1 1 /8 pints
pre-bloom
branching
1 2/3 pints
post-bloom

1/3 pints 1 pints 1 1/8 pints1 2/3 pints2 pints
1-6"
1-6" Flowering
early bloom late bloom
1-3"
6-12" 12-18"
1-4"
12-30"
10-15"
2-6"
4-8" 8"
> 3" runners
Kochia 1-6" 6-10" 10-20"
1-6" 6-10" 10-20"
< 3"
< 3"
rosette
1-3" 3-6"
3-10"
mature
< 3" 3-8"
>10"
1-3" 3-6" 6-10" actively growing
Rosette
<4" 4-12"
Prior to flower1-4"
Rosette
1-3" 3-6"
< 6" 6-20" >20"
1
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 7
prior to
flower
actively
growing
preflower
Pre-bolt
actively
growing
actively
growing
actively
growing
pre-flower
pre-flower
Seedling
pre-flower
pre-flower
Rosette
Rate Per Acre (according to weed growth stage)
2/3 pints
post-flower
early bolt
< 2"
< 2"
V4^
< 3"
< 3"
< 3"
73"
< 3"
flower
Post-bolt: Up
to 4"
after
branching
Purslane, Common
Ragweed, Common
Western, Lanceleaf
Sedge^
Shepherdspurse
Smartweed,
Pennsylvania_________
Sneezeweed, Bitter
Sowthistle
Sunflower
Thistle, Russian
Velvetleaf
For use in non-food/feed crop only. Adding crop oil concentrate has shown to improve performance on actively
growing annual sedge.
Pigweed, Prostrate
, Redroot
, Smooth
, Tumble
Poorjoe
Weeds Controlled
(including ALS - and
triazine-resistant)
Buckwheat, Wild
Buffalobur
Burdock
Buttercup
Chickweed, Common
Cockle, Cow
Cocklebur, Common
Coreopsis, Plains
Croton, Woolly
Dogfennel
Evening Primrose
Flax
Fleabane, Annual
Fixweed
Henbit
Horseweed/
Marestail___________
Knotweed Spp.
flower
bolting
< 3"
1-6"
1-6"
4-12"
Lambsquarters,
Common__________
Mallow, Common
Morning glory. Ivyleaf
Tr^iii
Mustards, Annual
, Tansy
Pennycress, Field
Peppenveed, Virginia
6-24"
rosette
< 3"
runners

Table 2. Application Rate and Timing - Biennial and Perennial Weeds.
Weeds Controlled1/3 pints 1 pints1 1/8 pints1 2/3 pints
2-3"
full leaf
flower
early bolting
Pre-flower
Rosette bolting
spring or fall
prior to bolting after bolting
actively growing
3-15" flower
Rosettepost-bolting
spring or fall
flower or berry
after bloom
<12" 12"/prebloom
rosette
rosette
Rosetteboltingflower
Rosettebolting actively growing
Rosette
1-4" 4-8"
Rosette
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 8
Applicators must follow maximum application rates in the Use Specific Information sections of the label.
The addition of liquid fertilizer (28-0-0, 32-0-0) at >2 the GPA of the spray solution has proven to give
increase suppression or control on certain species of weeds.
Rate Per Acre (according to weed growth stage)
2/3 pints
actively growing
actively growing
actively growing
pre-flower
full flower
full flower
45-90 days
after budbreak
Flower
actively growing
actively growing
actively growing
actively growing
actively growing
actively growing
actively growing
actively growing
full leaf
2 -31/4 pints
actively growing
Milkweed, Antelopehorn^
Nightshade, Silverleaf
,Black^
Persimmon. Eastern^
Prickly, Lettuce
Rabbitbrush^
Ragwort, Tansy
Redvine^
Sagebrush, Fringed^
Smartweed
Sorrel, Red
Sowthistle^
Spurge, Leafy^
Tallow Tree, Chinese*
Thistle, Bull
, Canada^
, Musk
, Plumeless
Vetch, Hairy
Yankeeweed
Yellow Starthistle**
Bindweed, Field
Bittercress
Buckeye species^
Bullnettle^
Chicory
Clove, Bur
Dandelion, Common
Dewberry, Southern^
Dock, Curly
Elderberry^
Goldenrod, Missouri
Groundsel, Texas
Honeysuckle, Hairy
Horsenettle, Carolina^
Ivy, Poison
Knapweed, Black^
, Russian^
, Spotted
Marshelder
Mesquite^
rosette!
bolting
bolting
8" full flower
10-18"

Ground Application (Banding)
Ground Application (Broadcast)
Spot or Small Area Application
Do not make spot treatments in addition to broadcast or band treatments.
Table 3. - Knapsack Sprayer Dilution Instructions
ADDITIVES
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 9
Water volume: Use 10-25 gallons of spray solution per broadcast acre for optimal performance. Use the
higher spray volume when treating dense or tall vegetation.
Bandwidth in inches
Row width in inches
Bandwidth in inches
Row width in inches
Application Equipment: Select nozzle design to produce minimal amounts of fine spray particles. Spray
nozzles as close to the weeds as is practical for good weed coverage.
HM-1603 HERBICIDE may be applied to individual clumps or small areas of undesirable vegetation using
handgun or similar types of application equipment. Apply diluted sprays to allow complete wetting (up to
runoff) of foliage and stems. For knapsack or other small capacity sprayers, prepare a solution of HM-
1603 HERBICIDE in water according to Table 3 - (assuming that the spot treatment rate equates to 40
gallons per acre on the broadcast basis.) Adding a surfactant (0.5% by volume) can help improve control.
Application equipment: Select nozzles designed to produce minimal amounts of fine spray particles.
Spray with nozzles as close to the weeds as is practical for good weed coverage.
To improve burndown of emerged weeds, surfactants and/or low use rates of liquid fertilizers (28-0-0; 32-
0-0), or crop oil concentrate may be used with HM-1603 HERBICIDE or HM-1603 HERBICIDE tank
mixes applied after the weeds have emerged. Crop oil concentrate is for non-food/feed crop uses only.
Do not apply tank mixes that include Ammonium Sulfate or Crop Oil Concentrate to any food/feed crop
use listed on this label. For food/feed crop use, do not use liquid fertilizers that contain Ammonium
Sprayer Capacity
______________(gallons of water)
___________________1 gallon
__________________3_gallons
__________________5_gallons
* 1 fluid ounce = 2 tablespoons
When applying HM-1603 HERBICIDE by banding, determine the amount of herbicide and water volume
needed using the following formula:
Amount of HM-1603 HERBICIDE®
to add to the spray tank
________2/3 fluid ounce*________
_________2 fluid ounces_________
3 fluid ounces
X Broadcast rate = Banding water
volume per acre volume per acre
X Broadcast rate = Banding herbicide
per acre rate per acre
May require repeat applications
2 Specified rate will provide top growth suppression only.
For improved root kill or woody species such as mesquite and eastern persimmon spray 2 pints of per acre HM-
1603 HERBICIDE each year for 3 consecutive years.
Under dense populations, a second application may be needed the following growing season.
For increased control of weeds such as blackberry and dewberry, HM-1603 HERBICIDE may be tank mixed with a
metsulfuron-methyl herbicide, if labeled for the use site.

TANK MIXING INFORMATION
10
Tank Mix Partners/Components
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read
and follow the applicable restrictions and limitations and directions for use on all product labels involved in
tank mixing. Users must follow the most restrictive directions for use and precautionary statements of
each product in the tank mixture.
Sulfate (AMS) as a source of nitrogen as tolerances in commodities derived from the crop may contain
residues that exceed established tolerances.
Nitrogen Source
Sprayable liquid fertilizers: Use % GPA of sprayable liquid fertilizers (28-0-0; 32-0-0) per acre. Do not use
brass or aluminum nozzles when spraying fertilizers.
Oil Concentrate
A crop oil concentrate must contain either a petroleum or vegetable oil base and must meet all of the
following criteria:
The exact composition of suitable products will vary; however, vegetable oil and petroleum oil
concentrates should contain emulsifiers to provide good mixing quality. Highly refined vegetable oils
have proven more satisfactory than unrefined vegetable oils. For additional information, see Compatibility
Test for Mix Components.
be non-phytotoxic
contain only EPA-exempt ingredients
provide good mixing quality in the jar test, and
be successful in local experience
Adjuvants containing crop oil concentrates may be used for preplant, pre-emergence and between
cropping applications. Do not use crop oil concentrate for postemergence applications in food/feed crops
(i.e. grass (hay or silage), grass grown for seed, pastures, rangeland, and wheat)
Non-ionic Surfactant
The standard label recommendation is 2-4 pints of an appropriate 80% active non-ionic spray surfactant
per 100 gallons of water. (Rate will vary with the size and condition of weeds to be controlled. Use
lowest rate per 100 gallons when weeds are small and actively growing. As weeds increase in size and
or become hardened off, the rate of non-ionic surfactant will have to be increased to give optimum
coverage and control.)
The following active ingredients may be tank mixed with HM-1603 HERBICIDE according to the specific
tank mixing instructions in this label and respective product labels.
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc
Rate Additive Per Acre
2-4 pints per 100 gallons^
Vi of spray solution
1 quart
Table 4. Additive Rate Per Acre.__________________
__________________Additive^____________________
______________Non-ionic Surfactant_______________
Sprayable Liquid Fertilizers (28-0-0; 32-0-0)______
Crop Oil Concentrate |
See manufacturer’s label for specific rate specifications.
2 Use lowest rate per 100 gallons when weeds are small and actively growing. As weeds increase in size
and or become hardened off, the rate of non-ionic surfactant will have to be increased to give optimum
coverage and control.

Always cap the jar and invert 10 cycles between component additions.
Mixing Order
* If sprayable fluid fertilizer is used as the carrier.
RESTRICTIONS AND LIMITATIONS
11
Compatibility Test for Mix Components
Before mixing components, always perform a compatibility jar test.
Always perform the Compatibility Test before mixing into the spray tank. Also, when using a sprayable
fluid fertilizer as the carrier, any product contained in PVA bags must first be completely dissolved in
water before the contents can be added to the fertilizer mix.
For 20 gallons per acre spray volume, use 3.3 cups (800 ml) of water. For other spray volumes adjust
accordingly. Only use water from the intended source at the source temperature.
Add components in the sequence indicated in the Mixing Order using 2 teaspoons for each pound or 1
teaspoon for each pint of specified label rate per acre.
• Maximum seasonal use rate: Refer to Table 5.
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc
When the components have all been added to the jar, let the solution stand for 15 minutes. Evaluate the
solution for uniformity and stability. The spray solution should not have free oil on the surface, nor fine
particles that precipitate to the bottom, nor thick (clabbered) texture. If the spray solution is not
compatible, repeat the compatibility test with the addition of a suitable compatibility agent. If the solution
is still incompatible, do not mix the ingredients in the same tank.
picloram__________
pronamide________
prosulfuron_______
quinclorac________
terbacil___________
thifensulfuron-methyl
triasulfuron________
tribenuron-methyl
If an inductor is used, rinse it thoroughly after each component has been added. Maintain constant
agitation during application.
1. Water. Begin by agitating a thoroughly clean sprayer tank half full ofclean water.
2. Agitation. Maintain constant agitation throughout mixing and application.
3. Products in PVA bags. Place any product contained in water-soluble bags into the mixing tank. Wait
until all water-soluble PVA bags have fully dissolved and the product is evenly mixed in the spray tank
before continuing.
4. Water-dispersible products (such as dry flowables, wettable powders, suspension concentrates, and
suspo-emulsions)
5. Water-soluble products (such as HM-1603 HERBICIDE).
6. Emulsifiable concentrates (such as oil concentrate, when applicable).
7. Water-soluble additives (such as liquid fertilizers (28-0-0; 32-0-0), when applicable).*
8. Remaining quantity of water.
diuron__________
fenoxaprop-p-ethyl
glyphosate_______
halosulfuron-methyl
metribuzin_______
metsulfuron-methyl
MCPA __________
paraquat-dichloride
See “Food/Feed Crop Specific Information” section for more information for more details. Read and
follow the applicable Restrictions and Limitations and Directions for Use on all products involved in tank
mixing. The most restrictive labeling applies to tank mixes. Physical incompatibility, reduced weed
control, or crop injury may result from mixing HM-1603 HERBICIDE with other pesticides (fungicides,
herbicides, insecticides, or miticides), additives, or fertilizers.
2,4-D___________
alachlor_________
ametryn_________
asulam_________
atrazine_________
bentazon________
carfentrazone-ethyl
clopyralid________
chlorsulfuron

CROP
All other crops 120 120 120
Crop
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 12
60
90
Maximum Rate
Per Acre
Aircraft
Application
DO NOT
ROTATE
• Preharvest Interval (PHI): Refer to “Food/Feed Crop Specific Information”
• Restricted entry Interval (REI): 48 Hours
• Crop Rotational Restrictions:
The interval between application and planting rotational crop is given below. Always exclude counting
days when the ground is frozen. Planting at intervals less than specified below may result in crop injury.
Moisture is essential for the degradation of this herbicide in soil.
Livestock Grazing
or Feeding^
Application Restrictions:
• Make only one Corn preplant application per crop cycle
• Make only one Soybean preplant application for the 15 day plantback interval.
• Do not apply to crops that show injury (leaf phytotoxicity or plant stunting) produced by any other prior
herbicide applications, because this injury may be enhanced or prolonged.
• Do not apply this product though any type of irrigation equipment. Do not contaminate irrigation
ditches or water used for domestic purposes.
• This product cannot be used to formulate or reformulate another pesticide product.
Application Precautions:
• Arid (dry) conditions: it is extremely important that the addition of a suitable Nonionic Surfactant, Oil,
or sprayable fertilizer be used when applying HM-1603 HERBICIDE. Higher rates of HM-1603
HERBICIDE may be needed to control susceptible weeds in this environment.
• Rainfast Period: Rainfall or irrigation occurring within 4 hours after postemergence applications may
reduce effectiveness of HM-1603 HERBICIDE.
• Stress: Do not apply to crops under stress such as stress due to lack of moisture, hail damage,
flooding, herbicide injury, mechanical injury, or widely fluctuating temperatures, as unsatisfactory
control may result.
21
14
120
120
120
120
30
21
90
60
120
120
120
120
45
21
21
45
30
45
Table 5. Crop Specific Restrictions and Limitations.
Maximum Rate
Per Acre
2/3 — 1
pints/A
7
2/3-1
pints/A
30Corn (field and
pop)**
Cotton_______
Barley, Oats,
Wheat and
other small
grains_______
Sorghum_____
Soybean***
14
15
(one application)
30
(two applications)
120
MINIMUM DAYS PLANT BACK INTERVAL
(Areas > rainfall or irrigation after
____________application)*
>1-3 1/2
pints/A
21
>3 1/2
pints/A
120
MINIMUM DAYS PLANT BACK INTERVAL
(Areas < Ya” rainfall or irrigation after
____________application)
>1-3 1/2
pints/A
60
>3 1/2
pints/A
120
DO NOT
ROTATE
*NOTE: A cumulative 1/2 inches of rainfall or irrigation must occur in 2 or less rainfalls and/or irrigations before
calculating plantback interval.
**Make only one Corn preplant application per crop cycle
***Make only one Soybean preplant application for the 15 day plantback interval.

Yes Yes
1
FOOD/FEED CROP SPECIFIC INFORMATION
PASTURES, RANGELAND AND GRASS (Hay, Silage)
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 13
Refer to Tables 1 and 2 for rate selection based on targeted weed or brush species. Some weed species
will require tank mixes for adequate control.
When perennial weeds are reaching maturity, mowing and allowing some regrowth will enhance control.
Difficult to control weeds may require a repeat application.
Do not use on bentgrass, susceptible grass pastures (such as carpetgrass, buffalograss, or St. Augustine
grass), lezpedeza, wild winter peas, vetch, clover, and alfalfa pastures as injury will occur.
Pre-harvest Interval (PHI); Dry hay and Silage; Treated grasses may be harvested for dry hay or silage
but do not harvest within 7 days of treatment.
Uses described in this section also pertain to small grains (including barley, corn, oats, rye, sudangrass,
or wheat) grown for pasture, hay, and silage only. Newly seeded areas including small grains grown for
pasture or hay, may be injured if rates of HM-1603 HERBICIDE are greater than 1 1/4 pints per acre are
applied.
In newly established hybrid Bermudagrass, Pangolagrass, and stargrasses {Cynodon spp.) use 1 to 2
pints of HM-1603 HERBICIDE per acre to control or suppress weeds after planting vegetative propagules
(stolens) of hybrid bermudagrasses. In addition to the weeds listed in Tables 1 and 2, this rate of HM-
1603 HERBICIDE will control or suppress annual sedges, broadleaf signalgrass, crabgrass, and
goosegrass. Best results will be obtained if HM-1603 HERBICIDE is applied at the germinating stage of
weeds. Under favorable conditions, this is usually 7-10 days after planting these grasses. Reduced
control can be expected if weeds are allowed to reach 1” in height before application or if germination of
weeds occurs 10 days after application.
Grazing and Feeding Lactating Animals; Do not graze lactating dairy animals within 7 days of
treatment.
Grazing and Feeding Non-Lactating Animals; There is no waiting period between treatments and
grazing for non-lactating animals. Do not permit meat animals being finished for slaughter to graze
treated fields within 30 days of slaughter.
For pasture renovations, wait 3 weeks per 1 1/4 pints of HM-1603 HERBICIDE used per acre before
interseeding or injury may occur.
2 1/2 pints
2 pints
5 pints
4 pints
Per Application
3 2/3 pints
1 1/4 pints
4 pints
2 pints
8 pints
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
HM-1603 HERBICIDE may be used for pasture (including pasture grown for hay), rangeland, grass grown
for hay or silage, fallow systems, Conservation Reserve Programs, and general farmstead (non-cropland
only).
Between Crop
Applications______
Pasture, Hay, Silage
Grass Grown for
Seed___________
Wheat__________
Sugarcane_______
Refer to “Food/Feed Crop Specific Information” for grazing and feeding restrictions.
Per Season
7-1/3 pints

PASTURE & RANGELAND RESTRICTIONS:
GRASS GROWN FOR SEED
GRASS GROWN FOR SEED RESTRICTIONS:
SUGARCANE
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 14
Metsulfuron-methyl
Triasulfuron
HM-1603 HERBICIDE contains 0.30 pounds a.e. of 2,4-D per pint. When tank mixing with products that
contain 2,4-D, do not exceed a combined totai of 4.0 pounds of a.e. per acre per year.
For ground appiications appiy in 10-20 gallons of spray solution per acre. For aeriai appiications appiy in
5-10 galions of spray soiution per acre.
Pasture and Rangeiand Tank Mixes - HM-1603 HERBICIDE may be appiied in tank mixes with one or
more of the following herbicides:
Do not apply more than 2-1/2 pints per acre per application.
Rates above 2-1/2 pints of HM-1603 HERBICIDE per acre are for spot treatments only
Do not make more than 2 applications per year.
Minimum spray interval between applications is 30 days.
If grass is to be cut for hay, Agricultural Use requirements for the Worker Protection Standard are
applicable.
For spot treatment, do not exceed 4.4 pints per acre per application, or 8.8 pints per acre per year.
On newly established stands, the grass must have at least reached the 1 tiller stage prior to treatment.
On established stands, where at least one seed crop has been harvested, two applications separated by
30 days may be made with rates up to 2 pints per acre.
HM-1603 HERBICIDE contains 0.225 pounds a.e. of dicamba per pint. If applied with other products
containing dicamba, either as a tank mix or separately during the same growing season do not exceed
2.0 lbs of dicamba a.e. per acre per crop cycle.
Apply HM-1603 HERBICIDE in the spring or fall when broadleaf weeds are in the 2-4 leaf stage and
rosettes are less than 2 ” across. Larger or more difficult to control broadleaf weeds may require high
rates of HM-1603 HERBICIDE and a tank mix partner for optimum control.
To control many species of emerged broadleaf weeds, apply % to 2 pints per acre. Use on newly
established or established stands of cool season grasses grown for seed including bentgrasses,
bluegrasses, fine fescues, tall fescue, orchardgrass, annual ryegrass and perennial ryegrass.
Do not make more than 2 applications per year.
Do not apply to grasses in the boot stage of development.
The maximum individual application rate is 2 pints per acre per application.
The retreatment interval is 30 days.
Do not use more than 4 pints of HM-1603 HERBICIDE per acre per year.

SUGARCANE RESTRICTIONS:
TEFF
HM-1603 HERBICIDE may be applied by ground or air.
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 15
The larger the weed, the population and environmental conditions will require the higher end of the rate
range to achieve the satisfactory control especially for many of the perennial weeds.
For ground applications, apply in 10 to 20 gallons of total broadcast spray mix per acre. For aerial
application, apply in 3 to 10 gallons of water per acre.
Applications of HM>1603 HERBICIDE can be made any time after the weeds have emerged and are
actively growing but prior to the close-in stage of sugarcane. When possible, direct the spray beneath the
sugarcane canopy in order to minimize the likelihood of crop injury. The use of directed sprays will also
aid in maximizing spray coverage of weed foliage. Application rates and timing are given below. Use the
higher level of listed rate ranges when treating dense vegetative growth.
SUGARCANE Tank Mixes; HM-1603 HERBICIDE may be tank mixed with one or more of the following
herbicides: ametryn, asulam, atrazine, metribuzin, terbacil
HM-1603 HERBICIDE contains 0.30 pounds a.e. of 2,4-D per pint. When tank mixing with products that
contain 2,4-D, do not exceed a combined total of 4.0 pounds of a.e. per acre per year.
Pre-emergent Application: Do not make more than one pre-emergence application per crop cycle.
Pre-emergent Application: Do not apply more than 4 pints per application.
Post-emergent Application: Do not make more than one post-emergence application per crop cycle.
Post-emergent Application: Do not apply more than 4 pints per application.
Do not harvest cane prior to crop maturity.
Preharvest interval (PHI) is 87 days.
To control emerged broadleaf weeds, apply 0.75 - 1.25 pints of HM-1603 HERBICIDE per acre. Apply
after the two-leaf stage and prior to the boot stage. Refer to “Plant Response” and “Livestock Feeding
Restrictions” under the GRASS PASTURES section of the label.
HM-1603 HERBICIDE contains 0.225 pounds a.e. of dicamba per pint. If applied with other products
containing dicamba, either as a tank mix or separately during the same growing season do not exceed
2.0 lbs of dicamba a.e. per crop cycle.
PASTURES, RANGELAND AND GRASS (Hay, Silage)
In newly established Teff, use 0.75 to 1.25 pints of HM-1603 HERBICIDE per acre to control or suppress
weeds after planting. Newly seeded areas including small grains grown for pasture or hay, may be
injured if rates of HM-1603 HERBICIDE are greater than 1.25 pints per acre are applied. Apply after the
two-leaf stage and prior to the boot stage.
For control of listed ANNUAL broadleaf weeds, apply 1 quart of HM-1603 HERBICIDE per treated
acre.
For suppression of listed PERENNIALS, apply 1 -2 quarts of HM-1603 HERBICIDE per treated acre.
GRASS SEED CROPS
HM-1603 HERBICIDE application rates and spray volumes will vary with the growth stage and population
of broadleaf weeds to be controlled. In general the smaller the weed, the lower use of the specified rate
range will provide satisfactory control.

TEFF RESTRICTIONS:
The Restricted Entry Interval (REI) is 48 hours.
The Pre-harvest Interval (PHI)(Not for Dry Hay and Silage) is 14 days.
Limited to one postemergence application per crop cycle.
Limited to one preharvest application per crop cycle.
If small grains are grown for pasture or hay only, refer to Pastures, Rangeland and Grass (Hay, Silage).
Do not graze or harvest for livestock feed prior to crop maturity.
Do not use HM-1603 HERBICIDE in wheat underseeded with legumes.
SPECIFIC USE PROGRAMS FOR FALL-SEEDED WHEAT ONLY:
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 16
Pre-harvest Interval (PHI); Dry Hay and Silage; Treated grasses may be harvested for dry hay or silage
but do not harvest within 37 days of treatment.
SMALL GRAIN CROPS (Grains used for Gluten-Free Flour)
Apply up to 1.25 pints of HM-1603 HERBICIDE per acre to Teff. Apply after the two-leaf stage and prior
to the boot stage. If small grains are grown for pasture or hay only, refer to Pastures, Rangeland and
Grass (Hay, Silage).
Grazing and Feeding Lactating Animals: Do not graze lactating dairy animals within 7 days of
treatment
Grazing and Feeding Non-Lactating Animals; There is no waiting period between treatments and
grazing for non-lactating animals. Do not permit meat animals being finished for slaughter to graze
treated fields within 30 days of slaughter.
Up to 3/4 pints of HM-1603 HERBICIDE per acre may be applied post emergent on fall-seeded wheat
after the wheat begins to tiller for suppression of perennial weeds, such as field bindweed. Applications
may be made in the fall following a frost but before a killing freeze. Periods of extended stress such as
cold and wet weather may enhance the possibility of crop injury. For fall applications only, do not use if
the potential for crop injury is not acceptable.
Early season applications to fall-seeded wheat must be made after tillering and prior to the jointing stage.
Care should be taken in staging early developing wheat varieties such as TAM 107, Madison, or
Wakefield to be certain that the application occurs prior to the jointing stage.
WHEAT
(Fall and Spring-seeded)
EARLY SEASON POST EMERGENCE APPLICATION (Fall and Spring Seeded):
Apply 1-1/4 pint of HM-1603 HERBICIDE per acre to wheat unless using one of the wheat specific
programs below.
Early season applications to spring-seeded wheat must be made after tillering and before wheat reaches
the 6-leaf stage.

PREHARVEST APPLICATIONS:
Preharvest use of HM-1603 HERBICIDE is not registered for use in California.
Tribenuron-methyl
Fallow Systems, Conservation Reserve Programs, and General Farmstead
WHEAT RESTRICTIONS:
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 17
Do not use preharvest-treated wheat for seed unless a germination test is performed on the seed with an
acceptable result of 95% germination or better. For control of additional broadleaf weeds or grasses, HM-
1603 HERBICIDE may be tank mixed with other herbicides such as glyphosate and metsulfuron-methyl
that are registered for preharvest use in wheat.
Do not graze or harvest for livestock feed prior to crop maturity.
Do not use HM-1603 HERBICIDE in wheat underseeded with legumes.
Postemergence:
• Make no more than one application per crop cycle.
• Do not apply more than 1-1/4 pints per acre per application.
Preharvest:
• Make no more than one application per crop cycle.
• Do not apply more than 1 1/4 pints per acre per application.
• Pre-Harvest interval is 14 days.
HM-1603 HERBICIDE can be used to control weeds that may interfere with harvest of wheat. Apply up to
1 1/4 pints of HM-1603 HERBICIDE per acre as a broadcast or spot treatment to annual broadleaf weeds
when wheat is in the hard dough stage and the green color is gone from the nodes (joints) of the stem.
Best results will be obtained if application can be made when weeds are actively growing but before
weeds canopy.
HM-1603 HERBICIDE contains 0.225 pounds a.e. of dicamba per pint. If applied with other products
containing dicamba, either as a tank mix or separately during the same growing season do not exceed
2.0 lbs of dicamba a.e. per acre per crop cycle.
These uses are considered Food/Feed Crops when harvested, grazed or foraged. Consult section on
“Tank Mixing Information” for adjuvant restrictions and section on “Additives” for specific use
directions.
Metsulfuron-methyl
Prosulfuron________
Triasulfuron________
Thifensulfuron-methyl
Diuron__________
Fenoxyprop-p-ethyl
MCPA __________
Metribuzin
HM-1603 HERBICIDE contains 0.30 pounds a.e. of 2,4-D per pint. When tank mixing with products that
contain 2,4-D, do not:
• Exceed a combined total of 1.25 pounds of a.e. per acre per crop cycle of 2,4-D for post emergent
use.
• Exceed 0.5 pounds of a.e. per acre per crop cycle of 2,4-D for pre-harvest application.
• Exceed a total of 1.75 pounds of a.e. per acre per crop cycle for all uses.
Table 6 - Wheat Tank Mixes
HM-1603 HERBICIDE can be tank mixed with one or more of the following herbicides
Bromoxynil_______
Carfentrazone-ethyl
Chlorsulfuron_____
Clopyralid________
1 Do not use low rates of sulfonylurea herbicide on more mature weeds or on dense vegetative growth.
2 Do not use as a tank mix treatment with Fenoxyprop-p-ethyl or MCPA on Durum wheat.
® Tank mixes with Diuron and Metribuzin are for use in fall-seeded wheat only.

BETWEEN CROP APPLICATIONS
Rates and Timings:
Between Crop Tank Mixes:
APPLICATIONS TO FALLOW GROUND PRIOR TO PLANTING COTTON
Rates and Timings
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 18
NON-FOOD/FEED USE (LAND NOT HARVESTED, GRAZED OR FORAGED) -
SPECIFIC INFORMATION.
Paraquat dichloride
Picloram
Pronamide
Quinclorac
Triasulfuron
Atrazine
Carfentrazone-ethyl
Chlorsulfuron
Glyphosate
Metribuzin
Metsulfuron-methyl
Avoid disturbing treated areas following application. Treatments may not kill weeds that develop from
seed or underground plant parts such as rhizomes or bulblets, after the effective period for HM>1603
HERBICIDE. For seedling control, a follow-up program or other cultural practices could be instituted.
HM-1603 HERBICIDE can be applied postharvest in the fall, spring, or summer during the fallow period or
to crop stubble/set-aside acres. Apply to weeds after crop harvest (postharvest) and before a killing frost
or in the fallow cropland or crop stubble the following spring or summer. To aid in suppressing certain
perennial or biennial broadleaf weeds (including cotton regrowth), this product may be applied either
alone or in combination with other registered herbicides. For cotton regrowth, a minimum rate of 1 1/5
pints/acre is recommended.
See “Restrictions and Limitations” for the recommended interval between application and planting to
prevent crop injury.
In tank mixes with one or more of the following herbicides, apply 1.0 -1.25 pints of HM-1603 HERBICIDE
per acre for control of annual weeds, or 1.25 - 4.25 pints of HM-1603 HERBICIDE per acre for control of
biennial and perennial weeds
PREPLANT DIRECTIONS (POSTHARVEST, FALLOW, CROP STUBBLE, SET-ASIDE) FOR
BROADLEAF WEED CONTROL
Apply 1-3 2/3 pints of HM-1603 HERBICIDE per acre. Refer to Table 1 to determine use rates for
specific targeted weed species. For best performance, apply HM-1603 HERBICIDE when annual weeds
are less than 6" tall, when biennial weeds are in the rosette stage and to perennial weed regrowth in late
summer or fall following a mowing or tillage treatment. The most effective control of upright perennial
broadleaf weeds such as Canada thistle and Jerusalem artichoke occurs if HM-1603 HERBICIDE is
applied when the majority of weeds have at least 4-6" of regrowth or for weeds such as field bindweed
and hedge bindweed that are in or beyond the full bloom stage. The addition of liquid fertilizers (28-0-0,
32-0-0) at % GPA has shown to increase efficacy.

Cropping Restrictions
Tank Mix Treatments
BETWEEN CROP APPLiCATION RESTRICTIONS:
CONSERVATION RESERVE PROGRAMS
CONSERVATION RESERVE PROGRAMS RESTRICTIONS:
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 19
Apply HM-1603 HERBICIDE as a broadcast or spot treatment to emerged and actively growing weeds at
the rate of 1 to 3-2/3 pints per acre. The most effective control of weeds occurs if application is made
when weeds are in the 2-4 leaf stage and rosettes are less than 2" across
Refer to Tables 1 and 2 for rate selection based on targeted weed or brush species. Some weed species
will require tank mixes for adequate control.
Refer to the Crop Rotational Restrictions Table in Section V. RESTRICTIONS AND LIMITATIONS for
appropriate pre-plant application intervals for cotton.
HM-1603 HERBICIDE contains 0.30 pounds a.e. of 2,4-D per pint. When tank mixing with products that
contain 2,4-D, do not exceed a combined total of 4.0 pounds of a.e. per acre per year.
For control of grasses or additional broadleaf weeds, HM-1603 HERBICIDE may be tank mixed with
prometryn, paraquat, and glyphosate herbicides
For program lands, including Conservation Reserve Program, consult program rules to determine whether
grass or hay may be used. The more restrictive requirements of the program rules or this label must be
followed.
• Do not apply more than 3-2/3 pints per acre per application.
• Do not make more than 2 applications per year.
• Minimum spray interval between applications is 30 days.
• Only labeled crops can be planted within 30 days of application.
Do not apply more than 4 pints per acre per application.
Do not make more than 2 applications per year.
Minimum spray interval between applications is 30 days.
If grass is to be cut for hay, Agricultural Use requirements for the Worker Protection Standard are
applicable.
HM-1603 HERBICIDE contains 0.225 pounds a.e. of dicamba per pint. If applied with other products
containing dicamba, either as a tank mix or separately during the same growing season do not exceed
2.0 lbs of dicamba a.e. per acre per crop cycle.
HM-1603 HERBICIDE contains 0.225 pounds a.e. of dicamba per pint. If applied with other products
containing dicamba, either as a tank mix or separately during the same growing season do not exceed
2.0 lbs of dicamba a.e. per crop cycle.
HM-1603 HERBICIDE may be used on Conservation Reserve Programs, general farmstead {non
cropland only), weed and brush control, or use in State Recognized Noxious Weed areas (non-cropland
areas).

GENERAL FARMSTEAD
Farmstead and Fence-row Treatment Application Instructions
To prepare soil and water emulsions, mix in the order and proportions indicated below.
1.
FOR SPRAYING FOLIAR APPLICATIONS:
4.
FOR DORMANT BASAL APPLICATIONS:
5.
FARMSTEAD AND FENCEROW RESTRICTIONS:
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 20
2.
3.
4.
1.
2.
3.
1.
2.
3.
4.
HM-1603 HERBICIDE contains 0.30 pounds a.e. of 2,4-D per pint. When tank mixing with products that
contain 2,4-D, do not exceed a combined total of 4.0 pounds of a.e. per acre per year.
Spray when leaves have reached full size but have not hardened due to drought or maturity.
Spray individual plants to wet with handgun.
For larger stems (up to 3" in diameter) and hard to control species, direct spray stream to base of
stems to wet the stem at soil surface in addition to wetting the foliage.
Do not apply under drip line of desirable trees or adjacent to desirable vegetation.
The solution should remain milky colored without an oily layer on top when under agitation. If an oily
layer forms, increase the amount of emulsifier or change to a more effective emulsifier.
Do not exceed 40 gallons of spray solution per treated acre per application. 4 pints of HM-1603
HERBICIDE in forty gallons of spray solution contains 0.9 pounds acid equivalent of dicamba and 1.2
pounds acid equivalent of 2,4-D. Spray plants to wet. Do not allow this spray mix to contact desirable
vegetation.
Water; Begin by agitating a thoroughly clean sprayer tank with the desired quantity of clean water.
Maintain constant agitation during complete mixing procedure.
Emulsifier: Add 0.5% volume to volume of water.
HM-1603 HERBICIDE: add 1.5 gallons per 100 gallons of total intended solution.
Diesel Oil; Add 10 gallons per 100 gallons of total intended solution.
Increase diesel oil content to 15% or 15 gallons of diesel oil per 100 gallons of total solution.
Spray in late winter and early spring before plants break dormancy.
Spray the bottom 24" of the target stem to wet on all sides.
For larger stems (up to 3" in diameter) and hard to kill species direct the spray solution to the base of
target stems to wet the soil at the stem/soil junction in addition to wetting the stem.
Do not apply under drip line of desirable trees or adjacent to desirable vegetation.
HM-1603 HERBICIDE may be applied using water or oil and water emulsions in spot application to
control undesirable vegetation using handgun or similar types of application equipment. In addition to
weed species listed in Tables 1 and 2, these treatments may be used to control or suppress woody plant
species listed in Table 7.
To control brush, briars, and weeds along fence-rows surrounding pasture and ranch lands, and fallow
fields, use a tank mix of 1.5% HM-1603 HERBICIDE, 88.5% water, 10% diesel oil, and sufficient
emulsifier (to mix the diesel and emulsifier). The diesel oil in this tank mix will damage or kill desirable
grasses and should not be used in pastures or where damage to desirable species cannot be tolerated.
Maintain constant agitation during application. Under good agitation, the spray solution should be milky
white with no oil layer on top. If oil layer forms, increase the amount of emulsifier or change to a more
effective emulsifier.

FOR CUT SURFACE TREATMENTS
CUT SURFACE RESTRICTIONS:
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 21
Table 7. The following list of trees and vines can be controlled on farmsteads and fencerows as
foliar, basal, or cut surface treatments:
HM-1603 HERBICIDE contains 0.30 pounds a.e. of 2,4-D per pint. When tank mixing with products that
contain 2,4-D, do not exceed a combined total of 4.0 pounds of a.e. per acre per year.
Apply HM-1603 HERBICIDE in an undiluted state as a cut surface treatment to control unwanted trees
and prevent sprouts of cut trees.
Applications to non-cropland areas are not applicable to treatment of commercial timber or other plants
being grown for sale or other commercial use, or for commercial seed production, or for research
purposes.
Postemergence (annual & perennial weeds);
• Do not make more than 2 applications per year.
• Do not apply more than 4 pints per acre per application.
• Minimum spray interval between applications is 30 days.
Postemergence (woody plants):
• Do not make more than 1 application per year.
• Do not apply more than 4 pints per acre per application.
Frill or Girdle Treatments; Make a continuous cut or a series of overlapping cuts using an axe to
girdle tree trunk. Spray or paint the cut surface with HM-1603 HERBICIDE.
• Stump Treatments: Spray or paint freshly cut surface with HM-1603 HERBICIDE. The cambium
layer (the area adjacent to the bark) should be thoroughly wet. Treat stumps within 6 hours after
cutting.
HM-1603 HERBICIDE contains 0.225 pounds a.e. of dicamba per pint. If applied with other products
containing dicamba, either as a tank mix or separately during the same growing season do not exceed
2.0 lbs of dicamba a.e. per crop cycle.
Poplar
Rabbitbrush
Redcedar, Eastern
Rose, McCartney
Rose, Multiflora
Sagebrush, Fringe
Sassafras
Spruce
Sumac
Sweetgum
Sycamore
Tarbrush
Willow
Witch hazel
Yaupon
Yucca
Alder
Ash
Aspen
Basswood
Beech
Blackberry
Blackgum
Cedar
Cherry
Chinquapin
Cottonwood
Creosotebush
Dewberry
Dogwood
Elm
Grape
Greenbriar
Hawthorn (Thornapple)
Hemlock
Hickory
Honeylocust
Honeysuckle
Hornbeam
Huckleberry
Huisache
Ivy, Poison
Kudzu
Locust, Black
Maple
Mesquite
Oak
Oak, Poison
Olive, Russian
Persimmon, Eastern
Pine
Plum, Sand (Wild Plum)

Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 22
Foliage Spray: To control alder and susceptible woody plants before planting forest seedlings, apply up
to 2 quarts of HM>1603 Herbicide per acre In a minimum of 10 gallons spray mixture per acre. If desired,
apply as a water spray including up to 1 quart of diesel oil, fuel oil, stove oil, or crop oil concentrate per
gallon of water (see "Mixing Instructions"). For best results, apply after alder foliage has reached full size.
Do not make more than one cut surface application per year.
Do not use more than 8.8 pints per 100 gallons of spray solution.
Forest Site Preparation
Budbreak Spray: For control of alder, susceptible broadleaf weeds, and susceptible woody plants before
planting forest seedlings, apply up to 2 quarts of HM-1603 Herbicide per acre in a minimum of 10 gallons
spray mixture per acre. Apply as an oil spray (see Mixing Instructions) after alder buds break, but
before foliage is 1/4 full size. A water spray including 2 to 4 quarts per acre of diesel oil, fuel oil, stove oil,
or crop oil concentrate may also be used.
Conifer Release: Some Conifers are more susceptible to HM-1603 Herbicide than others. Prior to
application, consult your local Forestry agency about use pattern and history of use. To control alder,
susceptible broadleaf weeds, and susceptible woody plants in young conifer stands, apply up to 2 pints
per acre in a minimum of 10 gallons spray mixture per acre. This spring foliage treatment should be
applied as a water spray when 3/4 of the brush foliage has full size leaves and before new conifer growth
reaches 2 inches in length. Such stages usually occur between early May and mid-June, but application
timing should be based on growth stages of brush and conifers. Application may cause leader
deformation and other conifer injury, but trees should overcome it during the next growing season.
To control hazel brush in the Lake states, apply up to 2 pints of HM-1603 Herbicide per acre in a
minimum of 10 gallons spray mixture per acre. Apply as a water spray when new shoot growth of hazel is
complete (usually mid-July).
After conifer species such as white pine, ponderosa pine, jack pine, red pine, black spruce, white spruce,
red spruce, and balsam fir crease growth and harden off and brush is still actively growing in late
summer, apply up to 3 pints of HM-1603 Herbicide per acre in a minimum of 10 gallons spray mixture per
acre. Apply as a water spray to control certain competing hardwoods such as alder, aspen, birch, hazel
and willow. However, if possible injury cannot be tolerated, do not use since this treatment may cause
conifer injury.
To control tanoak, madrone, ceanothus, canyon live oak, and manzanita, and to release Douglas fir,
hemlock, Sitka spruce or grand fir, apply up to 3 pints of HM-1603 Herbicide per acre in a minimum of 10
gallons spray mixture per acre. This spring foliage treatment should be applied as a water spray
including, if desired, up to 1 quart of diesel oil, fuel oil, stove oil, or crop oil concentrate per gallon of water
(see Mixing Instructions). Make application before new growth on Douglas fir is 2 inches long. To
release ponderosa pine from the same species, treat before new pine growth begins in the spring.
Addition of oil or oil concentrate may cause unacceptable injury to pines. For dormant applications in late
winter or early spring for control of susceptible woody species such as alder, willow, poplars, cherry, vine
maple, ceanothus, tanoak, madrone, and manzanita, apply up to 3 pints of HM-1603 Herbicide per acre
in a minimum of 10 gallons spray mixture per acre. This dormant treatment should be applied in diesel oil,
fuel oil, stove oil, or other suitable diluent such as water plus crop oil concentrate (see Mixing
Instructions). Do not use in plantations where pine and larch are among the desired crop species.
_______________________________FOREST MANAGEMENT _______________________________
Do not apply under drip line of desirable trees or adjacent to desirable vegetation. Limited to one
broadcast application per year.

Do not apply under drip line of desirable trees or adjacent to desirable vegetation.
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 23
Forest Roadsides: To control susceptible broadleaf weeds and woody plants on forest roadsides, apply
1 to 3 pints of HM-1603 Herbicide per acre in a minimum of 10 gallons spray mixture per acre. Apply as
a water spray and, if desired, include up to 3 quarts per acre of diesel oil, fuel oil, stove oil, or crop oil
concentrate (see Mixing Instructions). Apply when sufficient foliage is present for absorption.
Non-Crop Area Restrictions:
Postemergence (annual and perennial weeds):
• Limited to 2 applications per year.
• Minimum of 30 days between applications.
Postemergence (woody plants)
• Limited to one application per year.
Do not apply more than 4 % pints of HM-1603 Herbicide /Acre for a single application. (Equivalent to 1.4
lbs. 2,4-D acid and 1.1 lbs. dicamba acid per acre).
For control of many broadleaf weeds and small woody plants, apply 2/3 to 2 pints of HM-1603 Herbicide
per acre. Use the high rate for woody plants. Applications may be as broadcast sprays, small area
sprays or spot treatments. For small areas or spot spraying, use 2 fluid ounces of HM-1603 Herbicide
per gallon of water and spray weeds to runoff. Regardless of the method of application, use adequate
spray volume for full coverage of weeds. Preferred application timing is in the early spring when sufficient
weeds have emerged, and when weeds are small and actively growing, but before weeds are too mature.
Summer applications to older, drought-stressed weeds are less effective. However, weeds are more
susceptible again in the fall when cooler, wetter conditions support active growth before a killing frost For
fall treatment of mature weeds or perennial weed regrovrth, use up to 1.0 pints of HM-1603 Herbicide per
acre. Several seasons of spring plus fall treatments may be necessary to control certain perennials. Use
of oil sprays or the addition of spray adjuvants increases the risk of damage to desirable ground covers.
ROADSIDES; MEDIANS; HIGHWAY, RAILROAD, UTILITY AND PIPELINE RIGHTS-OF-WAY,
VACANT LOTS, AROUND UTILITY INSTALLATIONS, TRANSFORMERS, PUMP HOUSES, AND
BUILDINGS, STORAGE AREAS, FENCES, GUARDRAILS, LUMBER YARDS, INDUSTRIAL SITES,
AIRPORTS, TANK FARMS, FARMSTEADS, AND SIMILAR NONCROP AREAS
Plant Response: Bent grass, other warm season or southern grasses, alfalfa, clover, or other legumes
may be killed or injured. Do not apply when grass is in boot to milk stage, or after heading begins, if
grass production is desired. Do not apply to newly seeded areas until grass is well established.
Reseeding is not recommended for at least 30 days following application.

[Optional text for refillable plastic bulk containers]
In Case of Spill: In case of large-scale spillage regarding this product, call ChemTrec 800-424-9300.
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 24
Refillable container (110 & 250 gallon & bulk); Refill this container with pesticide only. Do not reuse
this container for any other purpose. Cleaning the container before final disposal is the responsibility of
the person disposing of the container. Cleaning before refilling is the responsibility of the refiller.
To clean the container before final disposal, empty the remaining contents from the container into
application equipment or mix tank. Fill the container about 10 percent full with water. Agitate vigorously
or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or
rinsate collection system. Repeat this rinsing process two more times.
(Non>refillable >5 gallons); Nonrefillable container. Do not reuse or refill this container. Offer for
recycling if available. Triple rinse container (ore equivalent) promptly after emptying.
PESTICIDE DISPOSAL; Pesticide wastes are toxic. Wastes resulting from this product must be disposed
of on site or at an approved waste disposal facility. Improper disposal of excess pesticide, spray mixture,
or rinsate is a violation of Federal law and may contaminate groundwater. If these wastes cannot be
disposed of by use according to label instructions, contact your State Pesticide or Environmental Control
Agency, or the Hazardous Waste representative at the nearest EPA Regional Office for guidance.
Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. Fill the
container % full with water. Replace and tighten closures. Tip container on its side and roll it back and
forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it
back and forth several times. Turn the container over onto its other end and tip back and forth several
times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal.
Repeat this procedure two more times. Then offer for recycling if available or puncture and dispose of in
a sanitary landfill, or by other procedures approved by state and local authorities.
Pressure rinse as follows (all sizes); Empty the remaining contents into application equipment or a mix
tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over
application equipment or mix tank or collect rinsate for later use for disposal. Insert pressure rinsing
nozzle inside of the container, and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds
after the flow begins to drip.
(Non-reflllable <5 gallons); Triple rinse as follows; Empty the remaining contents into application
equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container >4 full
with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or
store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this
procedure two more times. Then offer for recycling if available or puncture and dispose of in a sanitary
landfill, or by other procedures approved by state and local authorities.
CONTAINER HANDLING: Non-refillable container. Do not reuse or refill this container. Offer for
recycling, if available. Triple rinse or pressure rinse container (or equivalent) promptly after emptying.
Then offer for recycling if available or puncture and dispose of in a sanitary landfill, or by other procedures
approved by state and local authorities.
PESTICIDE STORAGE: Do not store below temperature of 32T or above 100T. Store in original
container in a well-ventilated area separately from fertilizer, feed, and foodstuffs. Keep container tightly
closed when not in use. Reduce stacking height where local conditions can affect package strength.
STORAGE AND DISPOSAL
PROHIBITIONS; Do not contaminate water, food, or feed by storage or disposal. Do not store under
conditions that might adversely affect the container or its ability to function properly.

Scientific Name
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 25
Steps to be taken in case material is released or spilled:
Dike and contain the spili with inert material (sand, earth, etc) and transfer liquid and solid diking material
to separate containers for disposal. Remove contaminated clothing, and wash affected skin areas with
soap and water. Wash clothing before re-use. Keep the spill out of all sewers and open bodies of water.
Weeds listed in this label:
Common Name
Sedge
Shepherdspurse
Smartweed, Pennsylvania
Sneezeweed, Bitter
Sunflower, Common (wild)
Thistle, Russian
Monarda punctata
Gutierrezia dracuncutoides
Polygonum convolvulus
Solanum rostratum
Arctium spp.
Ranunculus arvensis
Stellaria media
Agrostemma githago
Xanthium strumanum
Coreopsis tinctoria
Croton capitatus
Proboscidea iouisianica
Eupatorium capiHiMium
Oenothera ladniata
Linum catharticum
Erigeron annuus
Descurainia sophia
Lamium amplexicaule
Polygonum aviculare
Kochia scoparia
Chenopodium album
Lactuca serriola
Maalva neglecta
Conyza canadensis
Ipomoea hederacea
Ipomoea pupurea
Brassica spp.
Descurainia pinnata
Thlaspi arvense
Lepidium virginicum
Amaranthus biitoides
Amaranthus retrofiexus
Amaranthus hybndus
Amaranthus albus
Diodia teres
Portuiaca oleracea
Ambrosia artemisifoHa
Ambrosia bidentata
Ambrosia psHostachya
Cyperus compressus
Capseiia bursa-pastoris
Polygonum pensylvanicum
Helenium amarum
Helianthus annuus
Salsola iberica
ANNUALS
Beebalm, Spotted
Broomweed, Common
Buckwheat, Wild
Buffalobur
Burdock
Buttercup, Corn
Chickweed, Common
Cockle, Com
Cocklebur, Common
Coreopsis, Plains
Croton, Woolly
Devilsclaw,
Dogfennel (Cypressweed)
Eveningprimrose, Cutleaf
Flax
Fleabane, Annual
Hixweed
Henbit
Knotweed, Prostrate
Kochia
Lambsquarters, Common
Lettuce, Prickly
Mallow, Common
Horseweed/Marestail
Momigglory, Ivyleaf
Tall
Mustard, Annual
Tansy
Pennycress, Field
Pepperweed, Virginia
Pigweed, Prostrate,
Red root.
Smooth,
Tumble
Poorjoe
Purslane, Common
Ragweed, Common,
Lance-leaf,
Western

Scientific Name
Look inside for complete Restrictions and Limitations and Application Instructions
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 26
Food/Feed Crop Uses
This product can be used on the following:
These crops are considered Food/Feed crops only when harvested, grazed, or foraged. Otherwise, they
are considered non-Food/Feed uses.
Vetch
Yankeeweed
Conservation Reserve Program Land
Fallow Systems (Between Crop Application)
General Farmstead
Grass (Hay or Silage)
Pastures
Grass Grown for Seed
Convolvulus arvensls
Cardamlne spp.
Aesculusspp.
Cnidoscolus stimulosus
Gchorium intybus
Tn folium aureum
Taraxacum officinale
Rumex crispus
Sambucus canadensis
SoHdago missouriensis
Isocoma coronopifoHa
Senecio vulgaris
Lonicera
Solanum caroHniense
Rhus radicans
Centaurea nigra
Centaurea repens
Centaurea maculosa
Iva annua
Prosopis juHdora
Asdepius
Solanum elaeagnifolium
Solanum nigrum
Diospyros virginiana
Qiry^odiamnus puldiellus
Senecio jacobaea
Brunnidiia ovata
Artemisia frigida
Polygonum cotxineum
Rumex acetosella
Sondius arvensis
Euphorbia esula
Centaurea solsb'tialis
Sapium sebi^rum
Cirsium vulgare
Cirsium arven^
Canduus nutans
Canduus acanthoides
Vida spp.
Eupatonum armpositifoHum
__________Common Name
BIENNALS AND PERENNIALS
Bindweed, field
Bittercress
Buckeye
Bullnettle
Chicory
Clover, Hop
Dandelion
Dock, Curly
Elderberry
Goldenrod, Missouri
Goldenbush, Common
Groundset
Honeysuckle, Hairy
Horsenettle
Ivy, Poison
Knapweed, Black
Russian
Spotted
Marshelder
Mesquite
Milkweed, Antelopehom
Nightshade, Silverleaf
Black
Persimmon, Eastern
Rabbitbrush, Southwestern
Ragwort, Tansy
Redvine
Sagebrush, Fringed
Smartweed, Swamp
Sorrel, Red (Sheep Sorrel)
Sowthistle, Perennial
Spurge, Leafy
Starthistle, Yellow
Tallow Tree, Chinese
Thistle, Bull
Canada
Musk
Plumeless
• Rangeland
• Sugarcane
• Teff
• Wheat

CONDITIONS OF SALE AND WARRANTY
Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 27
HELENA AGRI-ENTERPRISES, LLC warrants that this product conforms to the chemical description on
the label and is reasonably fit for the purposes referred to in the Directions for Use subject to the inherent
risks referred to above. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, HELENA AGRI
ENTERPRISES, LLC MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR ANY
PARTICULAR PURPOSE OR OF MERCHANTABILITY OR ANY OTHER EXPRESS OR IMPLIED
WARRANTY. THIS WARRANTY DOES NOT EXTEND TO, AND THE BUYER SHALL BE SOLELY
RESPONSIBLE FOR, ANY AND ALL LOSS OR DAMAGE WHICH RESULTS FROM THE USE OF THIS
PRODUCT IN ANY MANNER WHICH IS INCONSISTENT WITH THE LABEL DIRECTIONS.
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BUYER'S EXCLUSIVE REMEDY AND
MANUFACTURER'S OR SELLER'S EXCLUSIVE LIABILITY FOR ANY AND ALL CLAIMS, LOSSES,
DAMAGES, OR INJURIES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT,
WHETHER OR NOT BASED IN CONTRACT, NEGLIGENCE, STRICT LIABILITY IN TORT OR
OTHERWISE, SHALL BE LIMITED, AT THE MANUFACTURER'S OPTION, TO REPLACEMENT OF OR
THE REPAYMENT OF THE PURCHASE PRICE FOR THE QUANTITY OF PRODUCT WITH RESPECT
TO WHICH DAMAGES ARE CLAIMED. When Buyer suffers losses or damages resulting from the use or
handling of this product (including claims based on contract, negligence, strict liability, or other legal
theories). Buyer must promptly notify Seller in writing of any claims to be eligible to receive either remedy
stated above. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, IN NO CASE SHALL
HELENA AGRI-ENTERPRISES, LLC OR THE SELLER BE LIABLE FOR CONSEQUENTIAL, SPECIAL
OR INDIRECT DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT.
HELENA AGRI-ENTERPRISES, LLC and the Seller offer this product, and the Buyer accepts it, subject to
the foregoing Conditions of Sale and Warranty, which may be varied only by agreement in writing signed
by a duly authorized representative of HELENA AGRI-ENTERPRISES, LLC. No employee or agent of
HELENA AGRI-ENTERPRISES, LLC or the Seller is authorized to vary or exceed the terms of this
Warranty in any other manner.
The DIRECTIONS FOR USE of this product reflect the opinion of experts based on field use and tests.
The directions are believed to be reliable and must be followed carefully. Crop injury, ineffectiveness, or
other unintended consequences may result because of such factors as weather conditions or presence of
other materials. To the extent consistent with applicable law, all such risks shall be assumed by the
Buyer.