crop-chem-docs/corpus/epa_ppls/7969-500.md

# BASF L-Glufosinate-Ammonium 211 Herbicide

- EPA Reg No: **7969-500**
- Registrant: BASF AGRICULTURAL SOLUTIONS US, LLC
- Signal word: Danger
- Active ingredients: L glufosinate ammonium (18.7%)
- Label accepted: 2025-10-30
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/007969-00500-20251030.pdf

---
1


October 30, 2025

Elizabeth Kneller
Sr. Regulatory Affairs Manager
BASF Agricultural Solutions US LLC
 2 TW Alexander Drive
 Research Triangle Park, NC 27713

Subject: PRIA Label Amendment – Increase Single and annual maximum rates, decrease
 RTI to 7 days on cotton and other changes.
 Product Name: BASF L-Glufosinate-Ammonium 211 Herbicide
 EPA Registration Number: 7969-500
 Application Date: 12/19/2024
 Case Number: 00640205

Dear Elizabeth Kneller:

The amended label referred to above, submitted in connection with registration under the
Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), as amended, is acceptable. This
approval does not affect any conditions that were previously imposed on this registration. You
continue to be subject to existing conditions on your registration and any deadlines connected
with them.

A stamped copy of your labeling is enclosed for your records. This labeling supersedes all
previously accepted labeling. You must submit one copy of the final printed labeling before you
release the product for shipment with the new labeling. In accordance with 40 CFR 152.130(c),
you may distribute or sell this product under the previously approved labeling for 18 months
from the date of this letter. After 18 months, you may only distribute or sell this product if it
bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is
defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3.

Should you wish to add/retain a reference to the company’s website on your label, then please
be aware that the website becomes labeling under FIFRA and is subject to review by the
Agency. If the website is false or misleading, the product would be misbranded and unlawful to
sell or distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) lists examples of
statements EPA may consider false or misleading. In addition, regardless of whether a website
is referenced on your product’s label, claims made on the website may not substantially differ
from those claims approved through the registration process. Therefore, should the Agency find

Page 2 of 2
EPA Reg. No. 7969-500
Case No. 00640205

or if it is brought to our attention that a website contains false or misleading statements or
claims substantially differing from the EPA approved registration, the website will be referred
to the EPA’s Office of Enforcement and Compliance.

Your release for shipment of the product constitutes acceptance of these conditions. If these
conditions are not complied with, the registration will be subject to cancellation in accordance
with FIFRA section 6.

If you have any questions, please contact Francisco Llarena-Arias at 202-566-2816 or at llaena-
arias.francisco@epa.gov.


 Sincerely,

Nathan Mellor, Chief
Fungicide and Herbicide Branch
 Registration Division
 Office of Pesticide Programs


Enclosure

Glufosinate-P-Ammonium Group 10 Herbicide
BASF L-Glufosinate- A mmonium 211 herbicide is a nonselective herbicide that
provides control of a broad spectrum of broadleaf and grassy weeds in
 LibertyLink or glufosinate-resistant crops.
Active Ingredient:
Glufosinate-P-Ammonium* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 .7%**
Other Ingredients: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 .3%
Total: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 .0%
* CAS Number 73777-50-1
** Equivalent to 1 .76 pounds of active ingredient per U .S . gallon; equivalent to 1 .61 pounds per
U .S . gallon acid equivalent, as glufosinate-P .
EPA Reg. No. 7969-500 EPA Est. No.
KEEP OUT OF REACH OF CHILDREN
DANGER/PELIGRO
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en
detalle . (If you do not understand the label, find someone to explain it to you in detail .)
See full label for complete First Aid, Precautionary Statements, Directions For Use,
Conditions of Sale and Warranty, and state-specific crop and/or use site restrictions .
In case of an emergency endangering life or property involving this product,
call day or night 1-800-832-HELP (4357).
Net Contents:
[Recirculation is advised] [for bulk tanks] [for totes]
BASF Agricultural Solutions US LLC
2 TW Alexander Drive
Research Triangle Park, NC 27713
Alternate Brand Names: Liberty ® ULTRA Herbicide, Liberty ® ULTRA,
Noventa® ULTRA, Noventa® ULTRA Herbicide,
Liberty ® ULTRA Herbicide – Powered by Glu-LTM Technology,
Liberty ® ULTRA - Powered by Glu-LTM Technology
[Text in brackets [ ] is optional or alternate text .]

2
TABLE OF CONTENTS
1.0 FIRST AID
2.0 PRECAUTIONARY STATEMENTS
2 .1 Hazards to Humans and Domestic Animals
2 .2 Personal Protective Equipment (PPE)
2 .2 .1 User Safety Requirements
2 .2 .2 Engineering Controls
2 .2 .3 User Safety Recommendations
2 .3 Environmental Hazards
2 .3 .1 Surface Water Advisory
2 .3 .2 Pollinator Advisory Statement
3.0 DIRECTIONS FOR USE
4.0 AGRICULTURAL USE REQUIREMENTS
5.0 STORAGE AND DISPOSAL
6.0 PRODUCT INFORMATION
6 .1 Important Crop Safety Information
6 .2 Weed Resistance Management Practices
7.0 MIXING INSTRUCTIONS
7 .1 Mixing Instructions for BASF L-Glufosinate- Ammonium 211 herbicide
7 .2 Compatibility Testing
7 .3 Tank Mixing
7 .4 Cleaning Instructions
8.0 APPLICATION INSTRUCTIONS
8 .1 Ground Application
8 .2 Nozzle Selection
8 .3 Aerial Application
8 .4 Adjuvant Instructions
9.0 MANDATORY SPRAY DRIFT MANAGEMENT
9 .1 MANDATORY SPRAY DRIFT MITIGATIONS
9 .1 .1 For Aerial and Ground Boom Applications
9 .1 .2 For Aerial Applications
9 .1 .3 For Ground Boom Application
9 .2 Mandatory Spray Drift Buffers
9 .2 .1 For Aerial and Ground Boom Applications
9 .2 .2 Aerial Spray Drift Buffer Reduction Options
9 .2 .3 Ground Boom Spray Drift Buffer Reduction Options
9 .3 Windbreak-Shelterbelt Criteria
10.0 ADDITIONAL SPRAY DRIFT INFORMATION
10 .1 Importance of Droplet Size
10 .2 Controlling Droplet Size - Ground Boom
10 .3 Controlling Droplet Size – Aircraft
10 .4 Release Height - Ground Boom
10 .5 Release Height - Aircraft
10 .6 Hooded (or Shielded) Sprayers
10 .7 Temperature and Humidity
10 .8 Temperature Inversions
10 .9 Wind
10 .10 Measuring Wind Speed and Wind Direction
11.0 MANDATORY RUNOFF MITIGATION
12.0 ENDANGERED AND THREATENED SPECIES PROTECTION REQUIREMENTS
13.0 General Use Restrictions (all crops)
13 .1 Application Restrictions

3
TABLE OF CONTENTS (continued)
14.0 Application Rate and Weeds Controlled
14 .1 Use Rate Equivalency Table
14 .2 Weeds Controlled [Not registered for use by California]
15.0 Crop Specific Directions for Use
15.1 Canola [Not registered for use by California]
15 .1 .1 LibertyLink ® or Glufosinate-resistant Canola In-crop Applications
15 .1 .2 LibertyLink ® or Glufosinate-resistant Canola for Seed Propagation
15 .1 .3 Burndown Use Prior to Planting or Prior to Emergence of LibertyLink ® or Glufosinate-resistant Canola
15 .1 .4 Crop Specific Restrictions - Canola
15.2 Field Corn and Silage Corn [Not registered for use by California]
15 .2 .1 LibertyLink ® or Glufosinate-resistant Field Corn and LibertyLink ® or Glufosinate-resistant Silage Corn
In-crop Applications
15 .2 .2 LibertyLink ® or Glufosinate-resistant Field Corn for Seed Propagation
15 .2 .3 Burndown Use Prior to Planting or Prior to Emergence of LibertyLink ® or Glufosinate-resistant Field Corn
15 .2 .4 Crop Specific Restrictions - Field and Silage Corn
15.3 Sweet Corn [Not registered for use by California]
15 .3 .1 LibertyLink ® or Glufosinate-resistant Sweet Corn In-crop Applications
15 .3 .2 Burndown Use Prior to Planting or Prior to Emergence of LibertyLink ® or Glufosinate-resistant Sweet
Corn
15 .3 .3 Crop Specific Restrictions - Sweet Corn
15.4 Cotton [Not registered for use by California]
15 .4 .1 LibertyLink ® or Glufosinate-resistant Cotton In-crop Applications
15 .4 .2 LibertyLink ® or Glufosinate-resistant Cotton for Seed Propagation
15 .4 .3 Burndown Use Prior to Planting or Prior to Emergence of LibertyLink ® or Glufosinate-resistant Cotton
15 .4 .4 Non-glufosinate-resistant Cotton In-crop Applications (Directed Application Hooded Sprayer)
15 .4 .5 Crop Specific Restrictions - Cotton
15.5 Soybean [Not registered for use by California]
15 .5 .1 LibertyLink ® or Glufosinate-resistant Soybean In-crop Applications
15 .5 .2 LibertyLink ® or Glufosinate-resistant Soybean for Seed Propagation
15 .5 .3 Burndown Use Prior to Planting or Prior to Emergence of LibertyLink ® or Glufosinate-resistant Soybean
15 .5 .4 Crop Specific Restrictions - Soybean
15.6 Burndown Use prior to planting or prior to emergence of Non-glufosinate-resistant crops (Canola,
Field Corn, Sweet Corn, Cotton, Soybean) [Not registered for use by California]
15.7 Fallow Fields and Postharvest Uses Associated with Canola, Field Corn, Sweet Corn, Cotton and
 Soybean Production [Not registered for use by California]
16.0 Rotational Crop Restrictions
17.0 Conditions of Sale and Limitations of Warranty and Liability
APPENDIX

4
2.0 PRECAUTIONARY STATEMENTS
2.1 Hazards to Humans and Domestic Animals
DANGER: Corrosive. Causes irreversible eye damage . Harmful if swallowed . Harmful if absorbed through
skin . DO NOT get in eyes or on clothing . Avoid contact with skin . Wear goggles, face shield or safety glasses .
Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco,
or using the toilet . Remove and wash contaminated clothing before reuse . Wear long-sleeved shirt and long
pants, socks, shoes, and chemical-resistant gloves . Prolonged or frequently repeated skin contact may cause
allergic reactions in some individuals . Avoid contact with skin or clothing . Avoid breathing spray mist .
2.2 Personal Protective Equipment (PPE)
Applicators and other handlers must wear:
• Long-sleeve shirt and long pants
• Chemical-resistant gloves including barrier laminate, butyl rubber ≥ 14 mils, nitrile rubber ≥ 14 mils, neoprene
rubber ≥ 14 mils, polyvinyl chloride (PVC) ≥ 14 mils, or viton ≥ 14 mils
• Shoes and socks
• Protective eyewear (goggles, face shield or safety glasses)
Mixers/loaders supporting aerial applications to canola, corn, cotton, and soybean must use closed
mixing/loading systems .
Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this
product’s concentrate . DO NOT reuse them .
2.2.1 User Safety Requirements
Follow manufacturer’s instructions for cleaning/maintaining PPE . If no such instructions for washables
exist, use detergent and hot water . Keep and wash PPE separately from other laundry .
2.2.2 Engineering Controls
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements
listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170 .240(d)(4-6)], the
handler PPE requirements may be reduced or modified as specified in the WPS .
1.0 FIRST AID
FIRST AID
If in eyes
• Hold eyes open and rinse slowly and gently with water for 15 to 20 minutes .
• Remove contact lenses, if present, after the first 5 minutes; then continue rinsing eyes .
• Call a poison control center or doctor for treatment advice .
If swallowed
• Call a poison control center or doctor immediately for treatment advice .
• Have person sip a glass of water if able to swallow .
• DO NOT induce vomiting unless told to by a poison control center or doctor .
• DO NOT give anything by mouth to an unconscious person .
If on skin
• Take off contaminated clothing .
• Rinse skin immediately with plenty of water for 15 to 20 minutes .
• Call a poison control center or doctor for treatment advice .
HOTLINE NUMBER
Have the product container or label with you when calling a poison control center or doctor or going for treat -
ment . For medical emergency treatment, call BASF Agricultural Solutions US LLC (hereafter “BASF”):
1-800-832-HELP (4357) or 1-800-222-1222 .
For non-emergency information on this product, call 1-800-832-HELP (4357) or the National Pesticides Informa -
tion Center (NPIC) at 1-800-858-7378 .
NOTE TO PHYSICIAN: If this product is ingested, endotracheal intubation and gastric lavage should be per -
formed as soon as possible, followed by charcoal and sodium sulfate administration . Probable mucosal damage
may contraindicate the use of gastric lavage . Additionally, call 1-800-832-HELP (4357) immediately for further
information .

5
2.2.3 USER SAFETY RECOMMENDATIONS
USER SAFETY RECOMMENDATIONS
• Remove clothing/PPE immediately if pesticide gets inside . Then wash thoroughly and put on clean
clothing .
• Remove PPE immediately after handling this product . Wash the outside of gloves before removing .
As soon as possible, wash thoroughly and change into clean clothing .
2.3 Environmental Hazards
2.3.1 Surface Water Advisory
DO NOT apply directly to water or to areas where surface water is present . DO NOT apply to intertidal
areas below the mean high water mark . DO NOT contaminate water by cleaning of equipment or dis-
posal of equipment washwater or rinsate .
This pesticide is toxic to vascular plants and needs to be used strictly in accordance with the drift and
runoff precautions on this label in order to minimize off-site exposures .
Under some conditions, this product may have a potential to run off to surface water or adjacent land .
Where possible, use methods which reduce soil erosion, including no till, limited till and contour plowing;
these methods also reduce pesticide runoff .
2.3.2 Pollinator Advisory Statement
This product contains a herbicide . Follow all label directions and precautions to minimize potential
off-target exposure in order to prevent effects to non-target plants adjacent to the treated site which may
serve as habitat or forage for pollinators .
3.0 DIRECTIONS FOR USE
It is a violation of federal law to use this product in a manner inconsistent with its labeling .
DO NOT use this product until you have read the entire label . DO NOT apply this product in a way that will contact
workers or other persons, either directly or through drift . Only protected handlers may be in the area during
application .
For any requirements specific to your state or tribe, consult the agency responsible for pesticide regulation .
In the State of Hawaii and territory of Puerto Rico, use only allowed for corn, cotton and soybean seed production/
propagation (LibertyLink ® or glufosinate-tolerant and conventional), including seed increase .
In the State of New York Only: Not For Use In Nassau and Suffolk Counties .
4.0 AGRICULTURAL USE REQUIREMENTS
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170 .
This standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and
greenhouses; and handlers of agricultural pesticides . It contains requirements for training, decontamination, noti -
fication, and emergency assistance . It also contains specific instructions and exceptions pertaining to the
statements on this label about personal protective equipment (PPE) and restricted-entry intervals . The require-
ments in this box only apply to uses of this product that are covered by the Worker Protection Standard .
DO NOT enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 12 hours .
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that
involves contact with anything that has been treated, including plants, soil, or water, is:
• Coveralls worn over short-sleeve shirt and short pants
• Chemical-resistant gloves including barrier laminate, butyl rubber ≥ 14 mils, nitrile rubber ≥ 14 mils, neoprene
rubber ≥ 14 mils, polyvinyl chloride (PVC) ≥ 14 mils, or viton ≥ 14 mils
• Chemical-resistant footwear plus socks
• Protective eyewear (goggles, face shield or safety glasses)

6
5.0 STORAGE AND DISPOSAL
STORAGE AND DISPOSAL
DO NOT contaminate water, food, or feed by storage or disposal .
Pesticide Storage
DO NOT use or store near heat or open flame . Keep the container tightly closed and dry in a cool, well-ventilated
place . Storage temperature must not exceed 125° F . If storage temperature for bulk BASF L-Glufosinate-
Ammonium 211 herbicide is below 32° F, the material must not be pumped until its temperature exceeds
32° F . Protect against direct sunlight .
For containers larger than 2 .5 gallons, periodic recirculation is advised during long term storage and prior to use
or dispersement .
Pesticide Disposal
Wastes resulting from the use of this product may be disposed of on-site or at an approved waste disposal
facility .
Container Handling
Rigid nonrefillable containers small enough to shake (i.e., [plastic] containers with capacities equal
to or less than 5 gallons)
Nonrefillable [plastic] Container. DO NOT reuse or refill this container . Triple rinse container promptly after
emptying . Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and
drain for 10 seconds after the flow begins to drip . Fill the container 1/4 full with water and recap . Shake for
10 seconds . Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal . Drain
for 10 seconds after the flow begins to drip . Repeat this procedure two more times . Once container is rinsed,
then offer for recycling if available or reconditioning if appropriate; or puncture and dispose of in a sanitary landfill,
or by incineration; or, if allowed by state and local authorities, by burning . If burned, stay out of smoke .
All refillable container types ([plastic] containers with capacities greater than 50 lbs)
Refillable [plastic] Container. Refill this container with pesticide only . DO NOT reuse this container for any
other purpose . Cleaning before refilling is the responsibility of the refiller . This is a sealed returnable container to
be used only for BASF L-Glufosinate- Ammonium 211 . When this container is empty, it must not be opened,
cleaned, or discarded . Empty containers must be returned to the original purchase location .
Bottom discharge Intermediate Bulk Container (IBC) ([plastic] containers with capacities greater
than 50 lbs)
Refillable Container. Refill this container with pesticide only . DO NOT reuse this container for any other pur-
pose . Cleaning before refilling is the responsibility of the refiller . Pressure rinsing the container before final disposal
is the responsibility of the person disposing of the container . Empty the remaining contents from the Intermediate
Bulk Container (IBC) into application equipment or mix tank . Raise the bottom of the IBC by 1 .5 inches on the
side which is opposite of the bottom discharge valve to promote more complete product removal . Completely
remove the top lid of the IBC . Use water pressurized to at least 40 PSI to rinse all interior portions . Continuously
pump or drain rinsate into application equipment or rinsate collection system while pressure rinsing . Continue
pressure rinsing for 2 minutes or until rinsate becomes clear . Replace the lid and close bottom valve . Contact
your Ag retailer or BASF for container return, disposal, and recycling recommendations .

7
6.0 PRODUCT INFORMATION
6.1 Important Crop Safety Information
READ BEFORE USING THIS PRODUCT
BASF L-Glufosinate- Ammonium 211 herbicide may be applied:
• as a burndown treatment prior to planting, prior to emergence or postharvest of canola, field corn, sweet
corn, cotton, and soybean
• in seed propagation for canola, field corn, cotton, and soybean
• as a postemergence weed control herbicide to be applied on LibertyLink ® or glufosinate-resistant crops
including LibertyLink canola, LibertyLink field corn, LibertyLink sweet corn, LibertyLink cotton, and
 LibertyLink soybeans
• as postemergence weed control herbicide to be applied in cotton with a hooded sprayer only
Postemergence row crop applications of BASF L-Glufosinate- Ammonium 211 may be made only to
crops resistant to glufosinate-ammonium or glufosinate-P-ammonium . BASF does not warrant the use of this
product on crops other than those designated as LibertyLink to safely withstand the application of
BASF L-Glufosinate- Ammonium 211 to the extent consistent with applicable law .
The basis of selectivity of BASF L-Glufosinate- Ammonium 211 in crops is the presence of a gene in
 LibertyLink crops which results in a plant that is resistant to Glufosinate-P-Ammonium, the active ingredient
of BASF L-Glufosinate- Ammonium 211 . Crops not containing this gene will not be resistant to
BASF L-Glufosinate- Ammonium 211 and severe crop injury and/or death may occur . DO NOT allow
spray to contact foliage or green tissue of desirable vegetation other than crops resistant to the active ingredi -
ent in this product .
BASF L-Glufosinate- Ammonium 211 may be applied to conventional or other transgenic cotton not resis -
tant to the active ingredient in BASF L-Glufosinate- Ammonium 211 using a hooded sprayer .
BASF L-Glufosinate- Ammonium 211 is a water-soluble nonselective herbicide for application as a foliar
spray for the control of a broad spectrum of emerged broadleaf and grassy weeds .
BASF L-Glufosinate- Ammonium 211 is only foliar-active with little or no activity in soil . Only weeds that are
emerged at the time of application will be controlled by BASF L-Glufosinate- Ammonium 211 .
• Apply to actively growing small weeds as specified in the Weeds Controlled section .
• BASF L-Glufosinate- Ammonium 211 is a contact herbicide and requires uniform, thorough spray
coverage .
• Warm temperatures, high humidity, and bright sunlight improve the performance of
BASF L-Glufosinate- Ammonium 211 .
• Necrosis of leaves and young shoots occurs within 2 to 4 days after application under good growing
conditions .
• BASF L-Glufosinate- Ammonium 211 is rainfast four (4) hours after application to most weed species;
therefore, rainfall within four (4) hours may necessitate retreatment or may result in reduced weed control .
Refer to specific use sections of this label for minimum intervals required before re-application of this prod -
uct and use rates .
• BASF L-Glufosinate- Ammonium 211 requires sunlight for activity . Applications near dawn and dusk may
result in reduced weed control . For best results, make applications between sunrise and 2 hours before
sunset .
• Weed control may be reduced if application is made when heavy dew, fog, and mist/rain are present; or
when weeds are under stress due to environmental conditions including drought, cool temperatures, or
extended periods of cloudiness .
To maximize weed control, DO NOT cultivate from 5 days before an application to 7 days after an
application .
• Consult your local Cooperative Extension Service or BASF representative for guidelines on the optimum
application timing for BASF L-Glufosinate- Ammonium 211 in your region .

8
6.2 Weed Resistance Management Practices
BASF L-Glufosinate- Ammonium 211 herbicide is a Group 10 herbicide, i .e ., a glutamine synthetase inhibi-
tor . A given weed population may contain or develop resistance to a herbicide after repeated use . Appropriate
resistance management strategies should be followed to mitigate or delay resistance . The following integrated
weed management techniques are effective in reducing problems with herbicide-resistant weed biotypes . It is
best to use multiple practices to manage or delay resistance, as no single strategy is likely to be totally effective .
Contact your local BASF representative, crop advisor or extension agent to find out if suspected resistant
weeds to this MOA have been found in your region . If resistant biotypes of target weeds have been reported,
use the application rates of this product specified for your local conditions .
Fields should be scouted prior to application to identify the weed species present and the growth to determine
if the intended application will be effective . Fields should be scouted after application to verify that the treatment
was effective .
Suspected herbicide-resistant weeds may be identified by these indicators:
Failure to control a weed species normally controlled by the herbicide at the dose applied, especially if control is
achieved on adjacent weeds .
A spreading patch of non-controlled plants of a particular weed species; and surviving plants mixed with con -
trolled individuals of the same species .
Report an incidence of non-performance of this product against a particular weed species to your local exten -
sion specialists, certified crop advisor and/or BASF representative .
• Rotate crops - Crop rotation diversifies weed management .
• Rotate herbicide-resistant traits - Alternate herbicide-resistant (HR) traits and/or use HR trait stacks for
more efficient rotation .
• Use multiple herbicide sites of action - Use tank mix partners and multiple sites of action during both the
growing season and from year to year to reduce the selection pressure of a single site of action .
• Know your weeds. Know your fields - Closely monitor problematic areas with difficult-to-control weeds or
dense weed populations .
• Start with clean fields - Effective tillage or the use of a burndown herbicide program can control emerged
weeds prior to planting .
• Stay clean. Use residual herbicides - Regardless of tillage system, preemergence or early postemergence
soil-applied residual herbicides should be used when possible .
• Apply herbicides correctly - Ensure proper application, including timing, full use rates and appropriate
spray volumes .
• Control weed escapes - Consider using an herbicide with an alternative mechanism of action through
broadcasting, spot treatment, and row wicking or non-chemical means to control escaped weeds such as
hand removal of weeds or other techniques to stop weed seed production and improve weed management .
• Zero tolerance. Reduce the seed bank - DO NOT allow surviving weeds to set seed, which will help
decrease weed populations from year to year and prevent major weed shifts .
• Clean equipment - Prevent the spread of herbicide-resistant weeds and their seeds .
• Manage borders. Prevent an influx of weeds into the field by managing borders .
• Scout fields before and after application .
• Diversified approach. To the extent possible, use a diversified approach towards weed management .
Whenever possible, incorporate multiple weed-control practices including mechanical cultivation, biological
management practices or crop rotation .
Contact your local extension specialist, certified crop advisory and/or BASF representative for additional resis -
tance management or IPM recommendation . Also for more information on weed resistance management, visit
the Herbicide Resistance Action Committee (HRAC) on the web at http://www .hracglobal .com .

9
7.0 MIXING INSTRUCTIONS
7.1 Mixing Instructions for BASF L-Glufosinate- Ammonium 211 herbicide
1 . Start with properly calibrated and clean equipment .
2 . Fill the spray tank half full with water .
3 . Start agitation .
4 . If mixing with a flowable/wettable powder tank mix partner, prepare a slurry of the proper amount of the
product in a small amount of water . Add the slurry to the spray tank .
5 . Add ammonium sulfate (AMS) to the spray tank if needed .
6 . If mixing with a liquid tank mix partner, add the liquid mix partner next .
7 . Complete filling the spray tank with water before adding BASF L-Glufosinate- Ammonium 211 , as foaming
may occur .
8 . Add BASF L-Glufosinate- Ammonium 211 when tank is full and continue agitation .
9 . If foaming occurs, use a silicone-based anti-foam agent .
Ensure that all spray system lines including pipes, booms, etc . have the correct concentration of spray solution
by flushing out the spray system lines before starting the crop application .
If tank mix partners listed on this label are added, maintain thorough agitation at all times until contents of the
tank are sprayed . If the spray mixture is allowed to settle, thorough agitation is required to resuspend the mix-
ture before spraying is resumed . Keep bypass line on or near bottom of tank to minimize foaming . Screen size
in nozzles or line strainers must be 50 mesh or larger .
7.2 Compatibility Testing
If BASF L-Glufosinate- Ammonium 211 is to be mixed with pesticide products not listed on this label, test the
compatibility of the intended tank mixture prior to mixing the products in the spray tank . The following proce-
dure assumes a spray volume of 25 gallons per acre . For other spray volumes, adjust the amount of the water
used accordingly . Check compatibility as follows:
1 . Place 1 .0 pint of water from the source that will be used to prepare the spray solution in a clear 1-quart jar .
2 . For each pound of a dry tank mix partner to be applied per acre, add 1 .5 teaspoons to the jar .
3 . For each 16 fl ozs of a liquid tank mix partner to be applied per acre, add 0 .5 teaspoon to the jar .
4 . For each 16 fl ozs of BASF L-Glufosinate- Ammonium 211 to be applied per acre, add 0 .5 teaspoon to the
jar .
5 . After adding all the ingredients, place a lid on the jar and tighten . Invert 10 times to mix .
6 . Let the mixture stand for 15 minutes and evaluate the solution for uniformity and stability . Look for separation,
large flakes, precipitates, gels, heavy oily film on the jar, or other signs of incompatibility . If the tank mix part-
ners are not compatible, DO NOT use the mixture in a spray tank .
7 . After compatibility testing is complete, dispose of any pesticide wastes in accordance with the STORAGE
AND DISPOSAL section of this label .
BASF L-Glufosinate- Ammonium 211 is formulated to mix readily in water . Prior to adding
BASF L-Glufosinate- Ammonium 211 to the spray tank, ensure that the spray tank is thoroughly clean, par-
ticularly if a herbicide with the potential to injure crops was previously used (see Cleaning Instructions ) . It is
the pesticide user’s responsibility to ensure that all products are registered for the intended use . Read and fol-
low the applicable restrictions and precautions and directions for use on all product labels involved in tank
mixing . Users must follow the most restrictive directions for use and precautionary statements of each product
in the tank mixture .
Tank Mix Instructions. BASF L-Glufosinate- Ammonium 211 may be applied in tank mix combinations
with labeled rates of other products provided these other products are labeled for the timing and method of
application for the crop to be treated . The tank mix partner must be used in accordance with the label restric-
tions and precautions . DO NOT exceed label dosage rates . BASF L-Glufosinate- Ammonium 211 cannot be
mixed with any product containing a label prohibition against such mixing . Refer to the specific crop section for
rates and other restrictions .

10
7.3 Tank Mixing
BASF L-Glufosinate- Ammonium 211 herbicide does not provide residual weed control or control of unex-
posed plant parts . Certain herbicide tank mixes may aid in the performance of BASF L-Glufosinate-
 Ammonium 211 or be added to provide residual herbicide activity . No additional surfactant is needed with any
tank mix partner . BASF L-Glufosinate- Ammonium 211 may be applied in tank mix combinations with
labeled rates of other products provided these other products are labeled for the timing and method of applica -
tion for the crop to be treated . The tank mix partner must be used in accordance with the label restrictions and
precautions . DO NOT exceed label dosage rates .
BASF L-Glufosinate- Ammonium 211 cannot be mixed with any product containing a label prohibition
against such mixing .
7.4 Cleaning Instructions
Prior To BASF L-Glufosinate- Ammonium 211 Use
Before using BASF L-Glufosinate- Ammonium 211 , thoroughly clean bulk storage tank, refillable tank, nurse
tanks, spray tank, lines, and filter particularly if a herbicide with the potential to injure crops was previously used .
Equipment must be thoroughly rinsed using a commercial tank cleaner and as instructed on the prior herbicide
label .
After BASF L-Glufosinate- Ammonium 211 Use
After using BASF L-Glufosinate- Ammonium 211 , triple rinse the spray equipment and clean with a commer -
cial tank cleaner before using the equipment for a new application . Make sure any rinsate or foam is thoroughly
removed from spray tank and boom . Rinsate may be disposed following the pesticide disposal directions on
this label .
8.0 APPLICATION INSTRUCTIONS
Uniform, thorough spray coverage is important to achieve consistent weed control with
BASF L-Glufosinate- Ammonium 211 .
8.1 Ground Application
• Apply early when weeds are small as identified in the Weeds Controlled section .
• Apply BASF L-Glufosinate- Ammonium 211 in a minimum of 15 gallons of water per acre . Increase to 20 gal-
lons of water per acre for better coverage of large weeds, dense foliage, or when using larger spray droplets .
8.2 Nozzle Selection
Apply with nozzles and pressure that deliver medium to coarse spray droplets as indicated in nozzle manufac -
turer’s catalogues and in accordance with ASABE Standard 572 .1 unless otherwise mandated by tank mix
product .
Addition of some drift retardants can significantly increase the droplet size and reduce spray coverage and effi -
cacy . If a drift retardant is used, ensure that it is compatible for use with
BASF L-Glufosinate- Ammonium 211 and spray equipment being used .
8.3 Aerial Application
• Apply early when weeds are small as identified in the Weeds Controlled section .
• Apply BASF L-Glufosinate- Ammonium 211 in a minimum of 10 gallons of water per acre .
• See the Spray Drift Management section of this label for additional information on proper application of
BASF L-Glufosinate- Ammonium 211 .
8.4 Adjuvant Instructions
• Ammonium sulfate (AMS) can be used at 1 .5 lbs/A to 3 lbs/A . Rates are dependent on tank mix partners,
environmental conditions, temperatures and potential for leaf burn .
• AMS has shown to improve weed control of difficult-to-control weeds, like velvetleaf and lambsquarters, and
under difficult environmental conditions (low relative humidity) or hard water .
• Anti-foam agent is advised .
The use of additional surfactants or crop oils may increase the risk of crop response . Please refer to the surfac-
tant label for more detailed information .

11
9.0 MANDATORY SPRAY DRIFT MANAGEMENT
9.1 MANDATORY SPRAY DRIFT MITIGATIONS
9.1.1 For Aerial and Ground Boom Applications:
• DO NOT apply when wind speeds exceed 15 miles per hour at the application site .
• Select nozzle and pressure that deliver medium or coarser spray droplets as indicated in nozzle man -
ufacturer’s catalogues and in accordance with American Society of Agricultural & Biological Engineers
standards 572 .1 and 641 (ASABE S572 and S641) .
• During application, the Sustained Wind Speed, as defined by the National Weather Service (standard
averaging period of 2 minutes) must register between 3 and 15 miles per hour .
• Wind speed must be measured at the release height or higher, in an area free from obstructions such
as trees, buildings, and farm equipment .
• DO NOT apply during temperature inversions .
9.1.2 For Aerial Applications:
• When applying to crops via aerial application equipment, the spray boom must be mounted on the
aircraft to minimize drift caused by wing tip or rotor blade vortices .
• Wind speed and direction must be measured on location using a windsock, an anemometer (including
systems to measure wind speed or velocity on an aircraft), or an aircraft smoke system .
• When the wind speed is between 11 to 15 miles per hour, the boom length must be 65% or less of the
wingspan for fixed wing aircraft and 75% or less of the rotor diameter for helicopters . Otherwise, the
boom length must be 75% or less of the wingspan for fixed-wing aircraft and 90% or less of the rotor
diameter for helicopters .
• When the wind speed is between 11 to 15 miles per hour, applicators must use a minimum of
3/4 swath displacement upwind at the downwind edge of the field . Otherwise, applicators must use a
minimum of 1/2 swath displacement upwind at the downwind edge of the field .
• DO NOT release spray at a height greater than 10 ft above the crop canopy unless a greater applica -
tion height is required for pilot safety .
9.1.3 For Ground Boom Application:
• Spray at the appropriate boom height based on nozzle selection and nozzle spacing, but DO NOT
exceed a boom height of 24 inches above target pest or crop canopy . Set boom to lowest effective
height over the target pest or crop canopy based on equipment manufacturer’s directions .
• Wind speed and direction must be measured on location using a windsock or anemometer (including
systems to measure wind speed or velocity using application equipment) .
9.2 Mandatory Spray Drift Buffers
9.2.1 For aerial and ground applications, maintain a wind-directional (downwind)
buffer from the edge of the treated area as follows:
Application Method Droplet Size Distribution (DSD) Minimum Buffer Distance
Aerial medium 50 ft
Ground medium to coarser 10 ft
The buffer footage distance may include the following managed areas, provided that people are not present
within the application exclusion zone during the application, and they will not be contacted by the pesticide,
either directly or through drift (see 40 CFR 170 .405(a) and 40 CFR 170 .505(a)):
• Agricultural fields, including untreated portions of the treated field .
• Roads, paved or gravel surfaces, mowed grassy areas adjacent to field, and areas of bare ground
from recent plowing or grading that are contiguous with the treated area .
• Buildings and their perimeters, silos, or other man-made structures with walls and/or roof .
• Areas maintained as a mitigation measure for runoff/erosion or drift control, such as vegetative filter
strips (VFS), field borders, hedgerows, Conservation Reserve Program lands (CRP), and other mitiga -
tion measures identified by EPA on the mitigation menu .1
• Managed wetlands including constructed wetlands on the farm .
• On-farm contained irrigation water resources that are not connected to adjacent water bodies, includ -
ing on-farm irrigation canals and ditches, water conveyances, managed irrigation/runoff retention
basins, and tailwater collection ponds .
1 Growers must ensure that pesticide use does not cause degradation of the CRP habitat.

12
9.2.2 Aerial Spray Drift Buffer Reduction Options:
• A 20% (i .e ., 10-foot) reduction in the required wind-directional buffer distance can be made if the applicator
selects a nozzle and pressure that deliver coarse or coarser droplets in accordance with ASABE S572 .
• A 35% (i .e ., 18-foot) reduction can be made if the applicator selects a nozzle and pressure that delivers
coarse droplets and uses an oil emulsion drift reducing adjuvant that constitutes 2 .5% of the volume of
the finished spray tank mix .
• A reduction in the required wind-directional buffer distance can be made if a windbreak or shelterbelt
(e .g ., trees or riparian hedgerows) between the application site and non-managed area is present and
meets the criteria listed in the Windbreak-Shelterbelt Criteria section of this label . The reduction is
50% (i .e ., 25 feet) if the windbreak or shelterbelt meets the basic windbreak-shelterbelt criteria and is
75% (i .e ., 38 feet) if the windbreak or shelterbelt meets the advanced windbreak-shelterbelt criteria .
• The percent reduction in wind-directional buffer distances may be added if you use one droplet size
buffer reduction option (coarse or coarse with an oil emulsion drift reducing adjuvant that constitutes
2 .5% of the volume of the finished spray tank mix) and one windbreak-shelterbelt option (basic or
advanced) . The maximum buffer reduction that can be achieved by a combination of buffer reduction
options is 100% (i .e ., no drift buffer) .
9.2.3 Ground Boom Spray Drift Buffer Reduction Options:
Any of the following options can reduce the ground buffer distance to 0 feet:
• Use of an oil emulsion drift reducing adjuvant that constitutes 0 .3% of the volume of the finished spray
tank mix .
• Application is made using an over-the-top hooded sprayer, as a layby application, or is made below
the crop canopy using drop nozzles .
• Use of a row-middle hooded sprayer .
• If a windbreak or shelterbelt (e .g ., trees or riparian hedgerows) between the application site and non- managed
area is present and meets the criteria listed in the Windbreak-Shelterbelt Criteria section of this label .
9.3 Windbreak-Shelterbelt Criteria
Both basic and advanced windbreaks or shelterbelts (e .g ., trees or riparian hedgerows) between the
application site and non-managed area must be present and meet the following criteria for 50% and
75% wind-directional buffer distance reductions, respectively:
• The windbreak or shelterbelt must be downwind between the pesticide application and the non-
managed area .
• The windbreak or shelterbelt must run the full length of the treated area with no significant breaks in
the vegetation .
• The windbreak or shelterbelt foliage must be sufficiently dense such that the non-managed area is not
visible from the upwind side at the time of application .
• The windbreak or shelterbelt must be planted according to local/regional/federal conservation program
standards; however, no state or federally listed noxious or invasive trees or shrubs should be planted .
• The windbreak or shelterbelt must be maintained such that their functionality is not compromised .
• For basic windbreaks (50% reduction)
- The height of the trees in the windbreak or shelterbelt must be at the same height or above the
release height of the application .
- The windbreak must have a minimum of one row of trees and/or shrubs or a 4-foot-wide strip of non-
woody vegetation .
- A semi-permeable manmade structure, curtain, or netting that is raised prior to application can be
used instead of a windbreak or shelterbelt . This structure must be downwind between the pesticide
application and the nonmanaged area, cover the entire distance of field adjacent to non-managed
area, and at the same height or higher as the release height of the application .
• For advanced windbreak-shelterbelt (75% reduction)
- The height of the trees in the windbreak or shelterbelt must be at a height that is at least twice as
high as the release height of the application .
- The windbreak or shelterbelt must have a minimum of two or more rows of trees and/or shrubs with
a mixture of vegetation types (e .g ., trees, shrubs, herbs), or that have 8 or more feet of depth for her-
baceous (nonwoody) vegetation .
- A semi-permeable manmade structure, curtain, or netting that is raised prior to application can be
used instead of a windbreak or shelterbelt . This structure must be downwind between the pesticide
application and the nonmanaged area, cover the entire distance of field adjacent to non-managed
area, and at a height that is at least twice as high as the release height of the application .
See ADDITIONAL SPRAY DRIFT INFORMATION section below for more details .

13
10.0 ADDITIONAL SPRAY DRIFT INFORMATION:
This section is intended to provide additional information for applicators to assist in implementing the mandatory
spray drift mitigations above . THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT . Be
aware of nearby non-target sites and environmental conditions .
10.1 Importance of Droplet Size
An effective way to reduce spray drift is to apply large droplets . Consider the largest droplets that provide target
pest control . While applying larger droplets will reduce spray drift, the potential for drift will be greater if applica-
tions are made improperly or under unfavorable environmental conditions .
10.2 Controlling Droplet Size - Ground Boom
• Volume - Increasing the spray volume so that larger droplets are produced will reduce spray drift . Consider
using the highest practical spray volume for the application . If a greater spray volume is needed, consider
using a nozzle with a higher flow rate .
• Pressure - Using the lowest spray pressure recommended for the nozzle will produce the target spray vol -
ume and droplet size .
• Spray Nozzle - Consider using a spray nozzle that is designed for the intended application, as well as using
nozzles designed to reduce drift .
10.3 Controlling Droplet Size - Aircraft
• Adjust Nozzles - Applicators should follow nozzle manufacturers’ recommendations for setting up nozzles .
Generally, to reduce fine droplets, nozzles should be oriented parallel with the airflow in flight .
10.4 Release Height - Ground Boom
For ground equipment, the boom should remain level with the crop and have minimal bounce . Automated
boom height controllers are recommended with large booms to better maintain optimum nozzle to canopy
height . Excessive boom height will increase the potential for spray drift .
10.5 Release Height - Aircraft
Higher release heights increase the potential for spray drift .
10.6 Hooded (or Shielded) Sprayers
Shielding the boom or individual nozzles can reduce spray drift . Consider using hooded sprayers . Applicators
should verify that the shields are not interfering with the uniform deposition of the spray on the target area .
10.7 Temperature and Humidity
When making applications in hot and dry conditions, consider using larger droplets to reduce effects of
evaporation .
10.8 Temperature Inversions
Drift potential is high during a temperature inversion . Temperature inversions are characterized by increasing
temperature with altitude and are common on nights with limited cloud cover and light to no wind . The pres-
ence of an inversion can be indicated by ground fog or by the movement of smoke from a ground source or an
aircraft smoke generator . Smoke that layers and moves laterally in a concentrated cloud (under low wind condi-
tions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air
mixing . Avoid applications during temperature inversions .
10.9 Wind
Drift potential generally increases with wind speed .
Applicators need to be familiar with local wind patterns and terrain that could affect spray drift .
10.10 Measuring Wind Speed and Wind Direction
Applicators should check and acquire the predicted wind speed and direction for the application site within 12
hours prior to conducting applications to determine the time periods wind speed is likely to fall outside the
applicable thresholds .
• Applicators should reassess wind speed and direction at the application site every 15 minutes while applica -
tions are in progress .
• Measuring wind speed and direction can be done by:
- Relying on equipment on the application equipment that measures wind speed (e .g ., aerial equipment) .
- Using a tower anemometer with telemetry or handheld anemometer . Users should read user manual on how
to calibrate, operate and interpret the output from an anemometer . Ground applicators should stop every 15

14
minutes to take a reading with a tower anemometer with telemetry or handheld anemometer . Some ane-
mometers may have software that would allow users to view wind measurements in real time while making
an application, and, in those cases, applicators would not have to stop to take measurements .
- Using a windsock . Wind can be estimated with a windsock using the strips on a windsock . The applicator
should consult the user manual for the windsock on wind speed estimation and direction of wind . Applica-
tors should look at the sock at least every 15 minutes to estimate wind speed and direction . The windsock
should be pointed in the opposite direction of the windbreak and the non-managed area .
- Using an aircraft smoke system . Laying down several puffs of smoke along different lines using an aircraft
smoke system can provide an accurate view of what the wind speed and direction for the application .
- Checking behind the spray rig at least every 15 minutes to see if the spray has changed direction from when
the application started .
11.0 MANDATORY RUNOFF MITIGATION:
• DO NOT apply when soils are saturated or above field capacity .
• DO NOT apply during rain .
You must achieve a minimum of three points for the crop uses listed on this label unless otherwise stipulated below .
Applicators must access and search Bulletins Live! Two (BLT) at https://www .epa .gov/pesticides/bulletins within six
months of the application to determine whether the application site falls within a Pesticide Use Limitation Area
(PULA) that has a Bulletin in BLT . If you are located inside a PULA, follow the instructions in the bulletin .
If the application site is located outside a PULA, runoff/erosion mitigation is required for this product unless certain
field/application parameters are present at the time of application (i .e ., subsurface or tile drains with controlled out-
let, perimeter berm systems, irrigation tailwater return systems, spot treatment, etc) . Access EPA’s Mitigation Menu
Website at www .epa .gov/pesticides/mitigation-menu for a full list of field/application parameters to evaluate whether
your field is subject to runoff/erosion mitigation .
If the application does not meet the specified field/application parameters, a minimum of three points for the crop
uses listed on this label must be achieved . The applicator must choose among the mitigation and/or mitigation relief
measures on EPA’s Mitigation Menu Website to meet or exceed these points before applying this product . The
website includes the full menu of runoff/erosion mitigation and mitigation relief measures . The following are
examples:
• Location in a very low, low, or medium runoff vulnerability county
• Field slope
• Soil incorporation
• Conservation tillage
• Vegetative strips
• Cover crop or continuous ground cover
• Irrigation water management
• Mulching
• Grassed waterway
• Vegetated ditch
• Constructed and natural wetlands
• Water retention systems
• Following recommendations from a runoff/erosion specialist or participating in a qualifying conservation program
(see the www .epa .gov/pesticides/mitigation-menu for minimum elements) .
To achieve mitigation points for the application, the mitigation and mitigation relief measures must be:
• Employed in accordance with the instructions and descriptions on EPA’s Mitigation Menu Website .
• In place during the application unless a different timing (such as before or after application) is specifically provided
in the measure’s description on EPA’s Mitigation Menu Website .
• EPA may periodically update the Mitigation Menu Website, for example, by adding new mitigation measures or
updating a mitigation measure description .
12.0 ENDANGERED AND THREATENED SPECIES PROTECTION REQUIREMENTS
Before using this product, you must obtain any applicable Endangered Species Protection Bulletins (Bulletins) within
six months prior to or on the day of application . To obtain Bulletins, go to Bulletins Live! Two (BLT) at
https://www .epa .gov/pesticides/bulletins . When using this product, you must follow all directions and restrictions
contained in any applicable Bulletin(s) for the area where you are applying the product, including any restrictions on
application timing if applicable . It is a violation of Federal law to use this product in a manner inconsistent with its

15
labeling, including this labeling instruction to follow all directions and restrictions contained in any applicable Bullet -
in(s) . For general questions or technical help, call 1-844-447-3813, or email ESPP@epa .gov .
13.0 GENERAL USE RESTRICTIONS (ALL CROPS)
13.1 Application Restrictions
• These restrictions are in addition to the crop-specific restrictions .
• DO NOT apply when winds are gusty or when conditions will favor movement of spray particles off the
desired spray target . See the Spray Drift Management section of this label for additional information on
proper application of BASF L-Glufosinate- Ammonium 211 herbicide .
• DO NOT use flood jet nozzles, controlled droplet application equipment, or air-assisted spray equipment .
• DO NOT apply BASF L-Glufosinate- Ammonium 211 when soils are saturated or above field capacity .
• DO NOT apply BASF L-Glufosinate- Ammonium 211 during rain .
• DO NOT apply using chemigation .
• DO NOT apply this product through any type of irrigation system .
• DO NOT apply aerially in non-glufosinate resistant crops .
• DO NOT apply at lower than the labeled rate .
• DO NOT apply more than the combined maximum annual total for both active ingredients when
 glufosinate ammonium and glufosinate-P-ammonium are used on the crop in the same year .
14.0 APPLICATION RATE AND WEEDS CONTROLLED
14.1 Use Rate Equivalency Table
Use the Use Rate Equivalency table to determine the corresponding amounts of active ingredient (glufosinate)
from BASF L-Glufosinate- Ammonium 211 product use rates .
Use Rate Equivalency for BASF L-Glufosinate- Ammonium 211 (1.76 lbs ai/gal)
Amount of
BASF L-Glufosinate-
 Ammonium 211
(fl ozs/A)
Amount of
L-glufosinate-
ammonium
(lb ai/A)
Amount of
L-glufosinate-
ammonium
(lb ae/A)
Glufosinate-
Ammonium
Equivalent
(lbs)
15 0 .21 0 .19 0 .41
16 0 .22 0 .20 0 .44
16 .5 0 .23 0 .21 0 .45
17 .5 0 .24 0 .22 0 .48
19 0 .26 0 .24 0 .52
20 0 .28 0 .25 0 .55
21 0 .29 0 .26 0 .58
22 0 .30 0 .28 0 .61
23 0 .32 0 .29 0 .63
24 0 .33 0 .30 0 .66
25 0 .34 0 .31 0 .69
27 0 .37 0 .34 0 .74
29 0 .40 0 .36 0 .80
30 0 .41 0 .38 0 .83
32 0 .44 0 .40 0 .88
34 0 .47 0 .43 0 .94
35 0 .48 0 .44 0 .96
39 0 .54 0 .49 1 .07
46 0 .63 0 .58 1 .27
55 0 .76 0 .69 1 .51
58 0 .80 0 .73 1 .59
69 0 .95 0 .87 1 .90

16
14.2 Weeds Controlled [Not registered for use by California]
For best results, apply to emerged, small and actively growing weeds less than 3 inches in height . Warm tem-
peratures, high humidity, and bright sunlight improve the performance of BASF L-Glufosinate-
 Ammonium 211 herbicide . Uniform, thorough spray coverage of weeds is necessary to achieve consistent
weed control . Refer to the Application Equipment section for more details .
Weed control may be reduced when applications are made to weeds under stress including drought or cool
temperatures and in dense populations . Stressed conditions may also include prior treatments of other contact
or systemic herbicides . Regrowth of weeds may occur due to the weed stage of growth at application, use rate,
or environmental conditions at the time of application .
When any of these conditions exist, select a higher rate within the label rate range to improve weed control .
Weeds Controlled at 15 to 21 fl ozs/A (0.21 to 0.29 lb ai/A) [16.5 to 22 fl ozs (0.23 to 0.30 lb ai/A)]
Broadleaf Weeds
Common Name Scientific Name
Anoda, spurred Anoda cristata
Beggarweed, Florida Desmodium tortuosum
Black medic Medicago lupulina L .
Blueweed, Texas Helianthus ciliaris DC .
Buckwheat, wild Polygonum convolvulus
Buffalobur Solanum cornutum
Burcucumber Sicyos angulatus
Canola, volunteer1 Brassica spp .
Carpetweed Mollugo verticillata
Catchweed bedstraw (cleavers) Galium aparine L .
Chickweed, common Stellaria media
Cocklebur, common Xanthium strumarium
Copperleaf, hophornbeam Acalypha ostryaefolia
Cotton, volunteer1 Gossypium spp .
Croton, tropic Croton glandulosus
Croton, woolly Croton capitatus
Devil’s claw Proboscidea louisiana
Eclipta Eclipta alba
Fleabane, annual Erigeron annuus
Galinsoga, hairy Galinsoga ciliate
Galinsoga, smallflower Galinsoga parviflora
Geranium, cutleaf Geranium dissectum L .
Groundcherry, cutleaf Physalis angulata
Hempnettle Galeopsis spp .
Horsenettle, Carolina2 Solanum carolinense
Jimsonweed Datura stramonium
Knotweed Polygonum spp .
Ladysthumb Polygonum persicaria
Lambsquarters, common Chenopodium album
Mallow, common Malva spp .
Mallow, Venice Hibiscus trionum
Marsh elder, annual Iva annua
Morningglory, entireleaf Ipomoea hederacea var . integriuscula
Morningglory, ivyleaf Ipomoea hederacea
(continued)

17
Weeds Controlled at 15 to 21 fl ozs/A (0.21 to 0.29 lb ai/A) [16.5 to 22 fl ozs (0.23 to 0.30 lb ai/A)]
(continued)
Broadleaf Weeds (continued)
Common Name Scientific Name
Morningglory, pitted Ipomoea lacunosa
Morningglory, sharppod Ipomoea cordatotriloba
Morningglory, smallflower Jacquemontia tamnifolia
Morningglory, tall Ipomoea purpurea
Mustard, wild Sinapis arvensis
Nightshade, black Solanum nigrum
Nightshade, eastern black Solanum ptycanthum
Nightshade, hairy Solanum sarrachoides
Pennycress Thlaspi arvense
Pigweed, prostrate Amaranthus blitoides
Pigweed, redroot Amaranthus retroflexus
Pigweed, smooth Amaranthus hybridus
Pigweed, spiny Amaranthus spinosus
Pigweed, tumble Amaranthus albus
Puncturevine Tribulus terrestris
Purslane, common Portulaca oleracea
Ragweed, common Ambrosia artemisiifolia
Ragweed, giant Ambrosia trifida
Senna, coffee Cassia occidentalis
Sesbania, hemp Sesbania herbacea
Shepherd’s purse Capsella bursa-pastoris
Sicklepod (java bean) Senna obtusifolia
Sida, prickly Sida spinosa L .
Smartweed, Pennsylvania Polygonum pensylvanicum
Smell melon Cucumis melo L . var . dudaim
Sowthistle, annual Sonchus oleraceus L .
Soybeans, volunteer1 Glycine max
Spurge, prostrate Euphorbia humifusa
Spurge, spotted Euphorbia maculata L .
Starbur, bristly Acanthospermum hispidum
Sunflower, common Helianthus annuus
Sunflower, prairie Corythucha pura
Sunflower, volunteer Helianthus annuus
Velvetleaf Abutilon theophrasti
Grass Weeds
Barley, volunteer2 Hordeum vulgare
Barnyardgrass Echinochloa spp .
Bluegrass, annual Poa annua L .
Corn, volunteer1 Zea mays L .
Crabgrass, large3 Digitaria sanguinalis
Crabgrass, smooth3 Digitaria ischaemum
Cupgrass, woolly Eriochloa villosa
Foxtail, bristly Setaria verticillata
(continued)

18
Weeds Controlled at 15 to 21 fl ozs/A (0.21 to 0.29 lb ai/A) [16.5 to 22 fl ozs (0.23 to 0.30 lb ai/A)]
(continued)
Grass Weeds (continued)
Common Name Scientific Name
Foxtail, giant Setaria faberi
Foxtail, green Setaria viridis
Foxtail, robust purple Setaria viridis
Foxtail, yellow3 Setaria pumila
Goosegrass2 Eleusine indica
Johnsongrass, seedling Sorghum halepense
Junglerice Echinochloa colonum
Millet, proso volunteer Milium vernale
Millet, wild proso Panicum miliaceum L .
Oat, wild3 Avena fatua
Panicum, fall Panicum dichotomiflorum
Panicum, Texas Panicum texanum
Rice, red Oryza sativa L .
Rice, volunteer1 Oryza sativa
Shattercane Sorghum vulgare Pers .
Signalgrass, broadleaf Brachiaria platyphylla
Sorghum, volunteer Sorghum spp .
Sprangletop Leptochloa spp .
Stinkgrass Eragrostis cilianensis
Wheat, volunteer3 Triticum spp .
Witchgrass Panicum virgatum L .
Additional Weeds Controlled at 19 to 34 fl ozs/A (0.26 to 0.47 lb ai/A)
Broadleaf Weeds
Common Name Scientific Name
Amaranth, Palmer Amaranthus palmeri
Kochia Kochia scoparia
Waterhemp, common Amaranthus rudis
Waterhemp, tall Amaranthus tuberculatus
Marestail4 Conyza canadensis
Pusley, Florida Richardia scabra
Thistle, Russian2 Salsola kali
Grass Weeds
Common Name Scientific Name
Sandbur, field3 Cenchrus pauciflorus
Biennial and Perennial Weeds
Common Name Scientific Name
Alfalfa Medicago sativa L .
Bermudagrass Cynodon dactylon
Bindweed, field Convolvulus arvensis L .
Bindweed, hedge Calystegia sepium
Bluegrass, Kentucky Poa pratensis L .
Blueweed, Texas Helianthus ciliaris DC .
Bromegrass, smooth Bromus inermis
(continued)

19
Additional Weeds Controlled at 19 to 34 fl ozs/A (0.26 to 0.47 lb ai/A) (continued)
Biennial and Perennial Weeds (continued)
Common Name Scientific Name
Burdock Arctium spp .
Bursage, woollyleaf Ambrosia grayi
Chickweed, mouse-ear Cerastium vulgatum L .
Clover, red Trifolium pratense L .
Dandelion Taraxacum officinale
Dock, smooth* Rumex spp .
Dogbane, hemp* Apocynum cannabinum
Goldenrod, gray Solidago nemoralis
Johnsongrass, rhizome Sorghum halepense
Milkweed, common* Asclepias syriaca
Milkweed, honeyvine* Ampelamus albidus
Muhly, wirestem* Muhlenbergia frondosa
Nightshade, silverleaf Solanum elaeagnifolium
Nutsedge, purple* Cyperus rotundus
Nutsedge, yellow* Cyperus ferax
Orchardgrass Dactylis glomerata L .
Poinsettia, wild* Euphorbia heterophylla L .
Pokeweed Phytolacca L .
Quackgrass Agropyron repens
Sowthistle, perennial Sonchus arvensis L .
Thistle, bull* Cirsium vulgare
Thistle, Canada Cirsium arvense
Timothy* Phleum pratense L .
Wormwood, biennial Artemisia biennis
* Suppression only .
1 Volunteer LibertyLink ® crops from the previous season will not be controlled . A timely cultivation 7 to 10 days
after an application may be needed .
2 May require sequential applications for control .
3 For best control of yellow foxtail, field sandbur, crabgrass, wild oats, and volunteer wheat, treat prior to tiller
initiation .
4 For optimum control apply on less than 6-inch marestail .
15.0 CROP SPECIFIC DIRECTIONS FOR USE
To determine the combined annual total amount of equivalent glufosinate-ammonium from all glufosinate-containing
products (L -glufosinate-ammonium and glufosinate-ammonium) refer to Section 14.1 Use Rate Equivalency
Table to determine the equivalent amount of glufosinate-ammonium (lb ai/A) being applied with the use of
BASF L-Glufosinate- Ammonium 211 herbicide and add that to the glufosinate-ammonium (lb ai/A) being
applied from the use of another glufosinate-containing product . DO NOT exceed the equivalent of 1 .90 lbs
 glufosinate-ammonium per acre per year from all glufosinate-containing products .
It is a violation of federal law to use this product in a manner inconsistent with its labeling .
DO NOT use this product until you have read the entire label . DO NOT apply this product in a way that will contact
workers or other persons, either directly or through drift . Only protected handlers may be in the area during
application .
For any requirements specific to your state or tribe, consult the agency responsible for pesticide regulation .
In the State of Hawaii and territory of Puerto Rico, use only allowed for canola, corn, cotton, and soybean seed pro -
duction/propagation ( LibertyLink or glufosinate-resistant and conventional), including seed increase .
In the State of New York Only: Not For Use In Nassau and Suffolk Counties .

20
15.1 Canola [Not registered for use by California]
(cultivars, varieties and/or hybrids, including Brassica napus, Brassica rapa, and Brassica juncea)
15.1.1 LibertyLink® or Glufosinate-resistant Canola In-crop Applications
Apply BASF L-Glufosinate- Ammonium 211 herbicide only to canola labeled as LibertyLink or
glufosinate- resistant . Uniform, thorough spray coverage is necessary to achieve optimum weed control .
Application
Timing
• Cotyledon up to early bolt stage of LibertyLink or glufosinate-resistant
canola .
• Slight discoloration of the canola may be visible after application . This effect
is temporary and will not influence crop growth, maturity, or yield .
Application
Use Rate
• Apply 15 to 23 fl ozs/A depending on weed species, size and density per the
Weeds Controlled section .
• Up to 3 applications in crop may be applied with a minimum of 7 days
between applications .
Maximum
per Year
• Up to 46 fl ozs/A may be used per year if no burndown application was used .
• If a burndown application was used the maximum per year is 69 fl ozs/A .
15.1.2 LibertyLink® or Glufosinate-resistant Canola for Seed Propagation
BASF L-Glufosinate- Ammonium 211 may be used in canola seed propagation as a foliar spray to
selectively eliminate canola plants that do not carry a gene that imparts resistance to glufosinate-
ammonium and as such, can be applied to remove susceptible segregates during canola seed
propagation . Breeding material not possessing the glufosinate-ammonium resistance gene will be
severely injured or killed if treated with this herbicide .
Application
Timing
• Cotyledon up to early bolt stage of LibertyLink or glufosinate-resistant
canola .
• Slight discoloration of the canola may be visible after application . This effect
is temporary and will not influence crop growth, maturity, or yield .
Application
Use Rate
• Apply 15 to 23 fl ozs/A .
• Up to 3 applications in crop may be applied with a minimum of 7 days
between applications .
Maximum
per Year • Maximum per year is 69 fl ozs/A .
15.1.3 Burndown Use Prior to Planting or Prior to Emergence of LibertyLink® or
Glufosinate-resistant Canola
BASF L-Glufosinate- Ammonium 211 may be applied as a burndown treatment prior to planting or
prior to emergence of LibertyLink or glufosinate-resistant canola . Use of BASF L-Glufosinate-
Ammonium 211 for burndown use prior to planting LibertyLink or glufosinate-resistant crops will limit
the amount of BASF L-Glufosinate- Ammonium 211 that may be used in-crop . Refer to the maximum
amount per year for the total amount of BASF L-Glufosinate- Ammonium 211 that may be used .
Application
Timing • Prior to planting, prior to emergence of crop or postharvest burndown .
Application
Use Rate
• Apply 19 to 34 fl ozs/A depending on weed species and intention of post
application use .
15.1.4 Crop Specific Restrictions - Canola
• DO NOT use on LibertyLink or glufosinate-resistant canola in the states of Alabama, Delaware,
Georgia, Kentucky, Maryland, New Jersey, North Carolina, South Carolina, Tennessee, Virginia, and
West Virginia .
• DO NOT use in Hawaii and Puerto Rico except for use on LibertyLink or glufosinate-resistant canola
for seed propagation .

21
• DO NOT apply BASF L-Glufosinate- Ammonium 211 herbicide within 65 days of harvesting
 LibertyLink or glufosinate-resistant canola .
• DO NOT graze the treated crop or cut for hay .
• DO NOT apply BASF L-Glufosinate- Ammonium 211 if canola shows injury from prior herbicide
applications or environmental stress (drought, excessive rainfall, etc .) .
• DO NOT apply more than 23 fl ozs/A (0 .32 lb ai/A) in a single application for in crop use .
• DO NOT apply more than 2 in-crop applications per year .
• DO NOT apply more than 3 applications per year, including burndown applications .
• DO NOT apply more than 34 fl ozs/A (0 .47 lb ai/A) in a single application for burndown use .
• DO NOT allow a retreatment interval of less than 7 days .
• DO NOT apply more than three applications of BASF L-Glufosinate- Ammonium 211 to
 LibertyLink ® or glufosinate-resistant canola for seed propagation .
• If applying to canola for seed propagation, DO NOT use treated canola seed for food, feed or oil
purposes .
• DO NOT make more than 1 application per year for burndown use for LibertyLink or glufosinate-
resistant canola .
• DO NOT apply more than 69 fl ozs/A (0 .95 lb ai/A) per year for LibertyLink or glufosinate- resistant
canola .
• These crop-specific restrictions are in addition to the Section 13.0 General Use Restrictions (All
Crops) .
15.2 Field Corn and Silage Corn [Not registered for use by California]
15.2.1 LibertyLink® or Glufosinate-resistant Field Corn and LibertyLink® or
Glufosinate-resistant Silage Corn In-crop Applications
Apply BASF L-Glufosinate- Ammonium 211 only to corn labeled as LibertyLink or
 glufosinate-resistant . Uniform, thorough spray coverage is necessary to achieve consistent weed con-
trol . Applications of BASF L-Glufosinate- Ammonium 211 on LibertyLink or glufosinate-resistant
corn may be made with drop nozzles from emergence until LibertyLink or glufosinate-resistant corn is
36 inches tall . Avoid spraying into the whorl or leaf axils of the corn stalks . Uniform, thorough spray cov-
erage of weeds is necessary to achieve consistent weed control .
Application
Timing • Emergence through V6 stage of growth .
Application
Use Rate
• Apply 19 to 34 fl ozs/A depending on weed species, size and density per the
Weeds Controlled section .
• Up to 3 applications (2 in-crop, 1 burndown) may be applied with a minimum
of 7 days between applications up to a maximum of 69 fl ozs/A per year .
Maximum
per Year • 69 fl ozs/A

22
15.2.2 LibertyLink® or Glufosinate-resistant Field or Silage Corn for
Seed Propagation
BASF L-Glufosinate- Ammonium 211 herbicide may be used in field corn seed propagation as a
foliar spray to selectively eliminate corn plants that do not carry a gene that imparts resistance to
glufosinate- ammonium and as such, can be applied to remove susceptible segregates during corn seed
propagation . Breeding material not possessing the glufosinate-ammonium resistance gene will be
severely injured or killed if treated with this herbicide .
Application
Timing • Emergence through V6 stage of growth or 24 inches tall .
Application
Use Rate
• Apply 17 .5 fl ozs/A .
• Up to 2 applications may be applied with a minimum of 10 days between
applications up to a maximum of 35 fl ozs/A per year .
Maximum
per Year • 35 fl ozs/A
15.2.3 Burndown Use Prior to Planting or Prior to Emergence of LibertyLink® or
Glufosinate-resistant Field or Silage Corn
BASF L-Glufosinate- Ammonium 211 may be applied as a burndown treatment prior to planting or
prior to emergence of LibertyLink or glufosinate-resistant Field corn . Use of BASF L-Glufosinate-
Ammonium 211 for burn-down use prior to planting LibertyLink or glufosinate-resistant crops will limit
the amount of BASF L-Glufosinate- Ammonium 211 that may be used in-crop . Refer to the maximum
amount per year for the total amount of BASF L-Glufosinate- Ammonium 211 that may be used .
Application
Timing • Prior to planting, prior to emergence of crop .
Application
Use Rate
• Apply 19 to 34 fl ozs/A depending on weed species and intention of post
application use .
Table 15.2.3. Use Rates for Burndown Applications for LibertyLink or Glufosinate-resistant
Field Corn
Burndown
(fl ozs/A)
Additional In-crop Applications if a
Burndown Application Made
Maximum Per Year
(fl ozs/A)
24 to 34 Up to 2 applications at 19 to 34 fl ozs/A 69
15.2.4 Crop Specific Restrictions - Field and Silage Corn
• DO NOT apply BASF L-Glufosinate- Ammonium 211 within 60 days of harvesting corn forage and
within 70 days of harvesting corn grain and corn fodder .
• DO NOT apply more than 69 fl ozs/A (0 .95 lb ai/A) of BASF L-Glufosinate- Ammonium 211 on
 LibertyLink or glufosinate-resistant field or silage corn per year .
• DO NOT apply more than 2 in-crop applications per year .
• DO NOT apply more than 3 applications per year, including burndown applications, when using less
than the maximum rate .
• DO NOT use nitrogen solutions as spray carriers .
• DO NOT apply BASF L-Glufosinate- Ammonium 211 if corn shows injury from prior herbicide appli -
cations or environmental stress (drought, excessive rainfall, etc .) .
• DO NOT apply more than 34 fl ozs/A (0 .47 lb ai/A) in a single application except for corn grown for
seed propagation .
• DO NOT apply more than 17 .5 fl ozs/A (0 .24 lb ai/A) in a single application for corn grown for seed
propagation .
• DO NOT allow a retreatment interval of less than 7 days for in-crop use .
• DO NOT use on LibertyLink or glufosinate-resistant field corn/silage corn grown in California .

23
• DO NOT allow a retreatment interval of less than 10 days for corn seed propagation use .
• DO NOT use on LibertyLink ® or glufosinate-resistant field corn/silage corn grown in California .
• DO NOT apply more than 2 applications for corn seed propagation per year .
• DO NOT apply more than 34 fl ozs/A (0 .47 lb ai/A) in a single application for burndown in LibertyLink
or glufosinate-resistant Field or silage corn .
• DO NOT make more than 1 application per year for burndown use for LibertyLink or glufosinate-
resistant Field or silage corn .
• DO NOT use in Hawaii and Puerto Rico except for use on LibertyLink or Glufosinate-resistant Field
Corn (field and silage) for Seed Propagation .
• These crop-specific restrictions are in addition to the Section 13.0 General Use Restrictions (All
Crops) .
15.3 Sweet Corn [Not registered for use by California]
15.3.1 LibertyLink® or Glufosinate-resistant Sweet Corn In-crop Applications
Apply BASF L-Glufosinate- Ammonium 211 herbicide only to sweet corn labeled as LibertyLink or
glufosinate- resistant . Uniform, thorough spray coverage is necessary to achieve consistent weed control .
Application
Timing • Emergence through V6 stage of growth .
Application
Use Rate
• Apply 15 fl ozs/A .
• Up to 2 applications may be applied with a minimum of 7 days between
applications .
Maximum
per Year • 30 fl ozs/A
15.3.2 Burndown Use Prior to Planting or Prior to Emergence of LibertyLink® or
Glufosinate-resistant Sweet Corn
BASF L-Glufosinate- Ammonium 211 may also be applied as a burndown treatment prior to planting
or prior to emergence of LibertyLink or glufosinate-resistant Sweet corn . BASF L-Glufosinate-
Ammonium 211 may also be used as a substitute for tillage in fallow fields to control or suppress
weeds . Use of BASF L-Glufosinate- Ammonium 211 for burn-down use prior to planting LibertyLink
or glufosinate-resistant crops will limit the amount of BASF L-Glufosinate- Ammonium 211 that may
be used in-crop . Refer to the maximum amount per year for the total amount of BASF L-Glufosinate-
Ammonium 211 that may be used .
Application
Timing • Prior to planting, prior to emergence of crop .
Application
Use Rate
• Apply 19 to 29 fl ozs/A depending on weed species and intention of post
application use .
15.3.3 Crop Specific Restrictions - Sweet Corn
• DO NOT apply BASF L-Glufosinate- Ammonium 211 within 50 days of harvesting sweet corn ears
and within 55 days of harvesting stover .
• If BASF L-Glufosinate- Ammonium 211 was used in a burndown application, DO NOT make poste-
mergence applications to the crop .
• DO NOT apply BASF L-Glufosinate- Ammonium 211 if corn shows injury from prior herbicide appli -
cations or environmental stress (drought, excessive rainfall, etc .) .
• DO NOT apply more than two applications of BASF L-Glufosinate- Ammonium 211 to sweet corn
per year .
• DO NOT allow a retreatment interval of less than 7 days .
• DO NOT apply more than 15 fl ozs/A (0 .21 lb ai/A) in a single application for in-crop applications .

24
• DO NOT apply more than 30 fl ozs/A (0 .41 lb ai/A) of BASF L-Glufosinate- Ammonium 211
 herbicide on sweet corn per year .
• DO NOT apply more than 29 fl ozs/A (0 .40 lb ai/A) in a single application for burndown in
 LibertyLink ® or glufosinate-resistant Sweet corn .
• DO NOT make more than 1 application per year for burndown use for LibertyLink or glufosinate-
resistant sweet corn .
• DO NOT use on LibertyLink or glufosinate-resistant sweet corn grown in California .
• These crop-specific restrictions are in addition to the Section 13.0 General Use Restrictions (All
Crops) .
15.4 Cotton [Not registered for use by California]
15.4.1 LibertyLink® or Glufosinate-resistant Cotton In-crop Applications
Apply BASF L-Glufosinate- Ammonium 211 only to cotton labeled as LibertyLink or glufosinate-
resistant . Uniform, thorough spray coverage is necessary to achieve consistent weed control . Tank
mixes with emulsifiable concentrate (EC) formulations may result in temporary crop injury . These tank
mixes are not advised when cotton plants are exhibiting slow growth or vigor .
Application
Timing • Emergence up to early bloom .
Application
Use Rate
• Apply 19 to 34 fl ozs/A depending on weed species, size, and density per the
Weeds Controlled section .
• Up to 3 applications (2 in-crop, 1 burndown) may be applied with a minimum
of 7 days between applications up to a maximum of 69 fl ozs/A per year .
Maximum
per Year • 69 fl ozs/A
15.4.2 LibertyLink® or Glufosinate-resistant Cotton for Seed Propagation
BASF L-Glufosinate- Ammonium 211 may be used in cotton seed propagation as a foliar spray to
selectively eliminate cotton plants that do not carry a gene that imparts resistance to glufosinate-
ammonium and as such, can be applied to remove susceptible segregates during cotton seed
propagation . Breeding material not possessing the glufosinate-ammonium resistance gene will be
severely injured or killed if treated with this herbicide .
Application
Timing • Emergence up to early bloom .
Application
Use Rate
• Apply 19 to 34 fl ozs/A .
• Up to 3 applications may be applied with a minimum of 7 days between
applications up to a maximum of 69 fl ozs/A per year .
Maximum
per Year • 69 fl ozs/A
15.4.3 Burndown Use Prior to Planting or Prior to Emergence of LibertyLink® or
Glufosinate-resistant Cotton
BASF L-Glufosinate- Ammonium 211 may also be applied as a burndown treatment prior to planting
or prior to emergence of LibertyLink or glufosinate-resistant Cotton . BASF L-Glufosinate-
Ammonium 211 may also be used as a substitute for tillage in fallow fields to control or suppress
weeds . Use of BASF L-Glufosinate- Ammonium 211 for burn-down use prior to planting LibertyLink
or glufosinate-resistant crops will limit the amount of BASF L-Glufosinate- Ammonium 211 that may
be used in-crop . Refer to the maximum amount per year for the total amount of BASF L-Glufosinate-
Ammonium 211 that may be used .
Burndown
(fl ozs/A)
Additional In-crop Applications if a
Burndown Application Made
Maximum Per Year
(fl ozs/A)
19 to 34 Up to 2 applications at 19 to 34 fl ozs/A 69

25
15.4.4 Non-glufosinate-resistant Cotton In-crop Applications (Directed Application
with Hooded Sprayer)
Application of BASF L-Glufosinate- Ammonium 211 herbicide to cotton varieties not labeled as
 LibertyLink ® or glufosinate-resistant requires the use of hooded spray equipment designed to minimize
exposure of the spray to the cotton stand . Uniform, thorough spray coverage is necessary to achieve con-
sistent weed control . Tank mixes with emulsifiable concentrate (EC) formulations may result in temporary
crop injury . These tank mixes are not advised when cotton plants are exhibiting slow growth or vigor .
Application
Timing • Emergence up to early bloom .
Application
Use Rate
• Apply 19 to 34 fl ozs/A per application depending on weed species, size and
density per the Weeds Controlled section .
• Up to 3 applications may be applied with a minimum of 7 days between
applications up to a maximum of 69 fl ozs/A per year .
Maximum
per Year • 69 fl ozs/A
Application Methods to Non-glufosinate-resistant Cotton
Application of BASF L-Glufosinate- Ammonium 211 to non glufosinate-resistant cotton varieties
requires the use of hooded spray equipment designed to minimize exposure of the spray to the cotton
stand . A hooded sprayer directs the spray onto weeds, while shielding the cotton stand from contact .
Use nozzles that provide uniform coverage within the treated area . Keep hoods on these sprayers
adjusted to protect desirable vegetation . Extreme care must be exercised to avoid exposure of the desir-
able vegetation to the spray .
With a hooded sprayer, the spray pattern is completely enclosed on the top and all 4 sides by a hood,
thereby shielding the crop from the spray solution . This equipment must be set up and operated in a
manner that avoids bouncing or raising the hoods off the ground in any way . The spray hoods must be
operated on the ground or skimming across the ground . Tractor speed must be adjusted to avoid
bouncing of the spray hoods . Avoid operation on rough or sloping ground where the spray hoods might
be raised off the ground . If the hoods are raised, spray particles may escape and come into contact with
the cotton, causing damage or destruction of the crop .
Herbicide rates and spray volume instructions are presented as broadcast equivalents and must be
reduced in proportion to the area actually treated . Use the following formulas to calculate the correct
rate and volume per planted (field) acre:
Band width in inches
x Broadcast RATE
per acre = Amount of banded
product needed per acreRow width in inches
Band width in inches
x Broadcast spray
VOLUME per acre = Banded spray volume
needed per acreRow width in inches
15.4.5 Crop Specific Restrictions - Cotton
• DO NOT apply BASF L-Glufosinate- Ammonium 211 to cotton in Florida, south of Tampa (Florida
Route 60), or in Hawaii or Puerto Rico, except for test plots, breeding nurseries or seed propagation .
• DO NOT apply BASF L-Glufosinate- Ammonium 211 within 70 days prior to cotton harvest .
• DO NOT apply more than 34 fl ozs/A (0 .47 lb ai/A) per application for burndown use .
• DO NOT make more than 1 burndown application per year for LibertyLink or glufosinate-resistant
cotton .
• DO NOT apply more than 34 fl ozs/A (0 .47 lb ai/A) per application for in-crop use including seed
propagation .
• DO NOT apply more than 69 (0 .95 lb ai/A) fl ozs per acre per year .
• DO NOT apply more than 3 applications per year, including burndown applications, when using less
than the maximum rate .
• If a burndown application is made, DO NOT apply more than 2 in-crop applications per year .

26
• DO NOT allow a retreatment interval of less than 7 days .
• Refer to Rotational Crop Restrictions section of this label for the appropriate rotational crop plant-
back intervals .
• DO NOT apply more than 34 fl ozs/A (0 .47 lb ai/A) per application .
• DO NOT apply in crop to non-glufosinate-resistant cotton except with a hooded sprayer .
• DO NOT tank mix BASF L-Glufosinate- Ammonium 211 herbicide with both an EC formulation
herbicide and acephate insecticide .
• These crop-specific restrictions are in addition to the Section 13.0 General Use Restrictions (All
Crops) .
15.5 Soybean [Not registered for use by California]
15.5.1 LibertyLink® or Glufosinate-resistant Soybean In-crop Applications
Apply BASF L-Glufosinate- Ammonium 211 only to soybean designated as LibertyLink or
glufosinate- resistant . Uniform, thorough spray coverage is necessary to achieve optimum weed control .
Application
Timing • Emergence up to but not including bloom or R1 growth stage .
Application
Use Rate
• Apply 19 to 34 fl ozs/A depending on weed species, size and density per the
Weeds Controlled section .
• Up to 3 applications (2 in-crop, 1 burndown) may be applied with a minimum
of 5 days between applications up to a maximum of 69 fl ozs/A per year .
Maximum
per Year • 69 fl ozs/A
15.5.2 LibertyLink® or Glufosinate-resistant Soybean for Seed Propagation
BASF L-Glufosinate- Ammonium 211 may be used in soybean seed propagation as a foliar spray to
selectively eliminate soybean plants that do not carry a gene that imparts resistance to glufosinate-
ammonium and as such, can be applied to remove susceptible segregates during seed propagation .
Breeding material not possessing the glufosinate-ammonium resistance gene will be severely injured or
killed if treated with this herbicide .
Application
Timing • Emergence up to but not including bloom or R1 growth stage .
Application
Use Rate
• Apply 19 to 34 fl ozs/A depending on size and density .
• Up to 2 in-crop applications may be applied with a minimum of 5 days
between applications up to a maximum of 69 fl ozs/A per year .
Maximum
per Year • 69 fl ozs/A
15.5.3 Burndown Use Prior to Planting or Prior to Emergence of LibertyLink® or
Glufosinate-resistant Soybean
BASF L-Glufosinate- Ammonium 211 may also be applied as a burndown treatment prior to planting
or prior to emergence of LibertyLink or glufosinate-resistant Soybean . BASF L-Glufosinate-
Ammonium 211 may also be used as a substitute for tillage in fallow fields to control or suppress
weeds . Use of BASF L-Glufosinate- Ammonium 211 for burndown use prior to planting LibertyLink
or glufosinate-resistant crops will limit the amount of BASF L-Glufosinate- Ammonium 211 that may
be used in-crop . Refer to the maximum amount per year for the total amount of BASF L-Glufosinate-
Ammonium 211 that may be used .
Burndown
(fl ozs/A)
Additional In-crop Applications if a
Burndown Application Made
Maximum Per Year
(fl ozs/A)
19 to 34 Up to 2 applications at 19 to 34 fl ozs/A 69

27
15.5.4 Crop Specific Restrictions - Soybean
• DO NOT apply BASF L-Glufosinate- Ammonium 211 herbicide within 70 days of harvesting
 LibertyLink ® or glufosinate-resistant soybean resistant soybean seed .
• DO NOT apply more than 69 fl ozs/A (0 .95 lb ai/A) of BASF L-Glufosinate- Ammonium 211 on
 LibertyLink or glufosinate-resistant soybeans per year .
• DO NOT apply more than 34 fl ozs/A (0 .47 lb ai/A) in a single application .
• DO NOT apply more than 3 applications per year, including burndown applications, when using less
than the maximum rate .
• DO NOT make more than 2 in-crop applications per acre per year .
• DO NOT make more than 1 application per year for burndown use for LibertyLink or glufosinate-
resistant soybean .
• DO NOT graze the treated crop or cut for hay .
• DO NOT apply BASF L-Glufosinate- Ammonium 211 if soybeans show injury from prior herbicide
applications or environmental stress (drought, excessive rainfall, etc .) .
• DO NOT allow a retreatment interval of less than 5 days .
• DO NOT use in Hawaii and Puerto Rico except for use on LibertyLink or Glufosinate-resistant soy-
bean for seed propagation .
• These crop-specific restrictions are in addition to the Section 13.0 General Use Restrictions (All Crops) .
15.6 Burndown Use Prior to Planting or Prior to Emergence of Non-glufosinate resistant
crops (Canola, Field Corn, Sweet Corn, Cotton, Soybean)
[Not registered for use by California]
BASF L-Glufosinate- Ammonium 211 may be applied as a burndown treatment prior to planting or prior to
emergence of non-glufosinate-resistant canola, field corn, sweet corn, cotton or soybean . Refer to the maxi-
mum amount per year for the total amount of BASF L-Glufosinate- Ammonium 211 that may be used .
Crop Burndown
(fl ozs/A)
Additional In-crop Applications
if a Burndown Application Made
Maximum Per Year
(fl ozs/A)
Non-glufosinate-resistant
Canola, Field corn,
or Soybean
19 to 34 None 34
Non-glufosinate-resistant
Cotton 19 to 34 1 application at 21 to 34 fl ozs/A 69
Non-glufosinate-resistant
Sweet corn 19 to 29 None 29
Restrictions to the Directions for Burndown Use in/on Non-glufosinate-resistant
Canola, Field Corn, Sweet Corn, Cotton, or Soybean
• DO NOT apply more than 34 fl ozs/A (0 .47 lb ai/A) in a single application for burndown in non-glufosinate-
resistant canola, non-glufosinate-resistant field corn, non-glufosinate-resistant cotton, or
non-glufosinate-resistant soybean .
• DO NOT apply more than 29 fl ozs/A (0 .40 lb ai/A) in a single application for burndown in non-glufosinate-
resistant sweet corn .
• DO NOT make more than 1 application per year for burndown use for non-glufosinate-resistant canola, non-
glufosinate-resistant field corn, non-glufosinate-resistant sweet corn, non-glufosinate-resistant cotton, or
non-glufosinate-resistant soybean .
• DO NOT apply more than 34 fl ozs/A (0 .47 lb ai/A) per year for non-glufosinate-resistant canola, non-
glufosinate-resistant field corn, or non-glufosinate-resistant soybean .
• DO NOT apply more than 29 fl ozs/A (0 .40 lb ai/A) per year for burndown for non-glufosinate-resistant sweet
corn .

28
• DO NOT make any in-crop applications for non-glufosinate-resistant canola, non-glufosinate-resistant field
corn, non-glufosinate-resistant sweet corn, or non-glufosinate-resistant soybean .
• DO NOT apply more than 69 fl ozs/A (0 .95 lb ai/A) per year for non-glufosinate-resistant cotton .
• DO NOT apply in crop to non-glufosinate-resistant cotton except with a hooded sprayer . See applications
directions for cotton for more information .
• These crop-specific restrictions are in addition to the Section 13.0 General Use Restrictions (All Crops) .
15.7 Fallow Fields and Postharvest Uses Associated with Canola, Field Corn,
Sweet Corn, Cotton and Soybean Production [Not registered for use by California]
BASF L-Glufosinate- Ammonium 211 herbicide may be used for the control of listed weeds on fields follow-
ing canola, corn, sweet corn, cotton and soybean harvest and for the control of listed weeds on fallow fields
prior to planting canola, field corn, sweet corn, cotton and soybean . Tank mixes with 2,4-D, glyphosate,
clethodim or residual herbicides can be made with BASF L-Glufosinate- Ammonium 211 to enhance total
weed control . When using BASF L-Glufosinate- Ammonium 211 in tank mix combinations, follow the pre-
cautions and directions of use of the most restrictive label .
Restrictions to the Directions for Use in Fallow Fields and Postharvest
• DO NOT apply more than 34 fl ozs/A (0 .47 lb ai/A) in a single application to fallow fields or postharvest in a
single application per year .
• DO NOT make more than 1 application in fallow fields or postharvest per year .
• If BASF L-Glufosinate- Ammonium 211 is applied according to labeled crop use on the same acre,
DO NOT exceed the Maximum annual use Rate (as stated in Section 13.0 General Use Restrictions )
from sequential applications of BASF L-Glufosinate- Ammonium 211 when applied to fallow fields or
postharvest .
• These crop-specific restrictions are in addition to the Section 13.0 General Use Restrictions (All Crops) .
16.0 ROTATIONAL CROP RESTRICTIONS
Rotational crop planting intervals following application of BASF L-Glufosinate- Ammonium 211 are listed below .
Failure to comply with these restrictions may result in illegal residues in rotated crops .
Rotational Crop
Plant-back Interval
(minimum rotational crop planting
interval from last application)
Canola, Corn, Sweet Corn, Cotton, Soybean May be planted at any time
Cover Crops* 7 days
Brassica Leafy Vegetables, Leafy Vegetables, Root and
Tuber Vegetables, and Small Grains (barley,
buckwheat, oats, rye, teosinte, triticale, and wheat)
70 days
Other Crops 180 days
* Planting of cover crops for conservation purposes may be planted in fields previously treated with
BASF L-Glufosinate- Ammonium 211 as long as these cover crops are not grazed by livestock nor harvested
for food . For best results, DO NOT plant cover crops less than 7 days after an application of
BASF L-Glufosinate- Ammonium 211 nor before 1/2 inch of rainfall or irrigation has occurred . Planting sooner
than this may result in stand reduction . Planting of crops listed in the Rotational Crop Restrictions that follow
the listed planting intervals and other restrictions are considered a rotational crop and therefore may be
harvested .

29
17.0 CONDITIONS OF SALE AND LIMITATIONS OF WARRANTY AND LIABILITY
Conditions of Sale and Warranty
The Directions For Use of this product reflect the opinion of experts based on field use and tests . The
 directions are believed to be reliable and must be followed carefully . However, it is impossible to eliminate all risks
inherently associated with the use of this product . Crop injury, ineffectiveness or other unintended consequences
may result because of such factors as weather conditions, presence of other materials, or use of the product in a
manner inconsistent with its labeling, all of which are beyond the control of BASF Agricultural Solutions US LLC
(“BASF”) or the Seller . To the extent consistent with applicable law, all such risks shall be assumed by the Buyer .
BASF warrants that this product conforms to the chemical description on the label and is reasonably fit for the
 purposes referred to in the Directions For Use , subject to the inherent risks, referred to above .
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BASF MAKES NO OTHER EXPRESS OR
IMPLIED WARRANTY OF FITNESS OR MERCHANTABILITY OR ANY OTHER EXPRESS OR IMPLIED
WARRANTY.
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BUYER’S EXCLUSIVE REMEDY AND BASF’S
EXCLUSIVE LIABILITY, WHETHER IN CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY, OR
 OTHERWISE, SHALL BE LIMITED TO REPAYMENT OF THE PURCHASE PRICE OF THE PRODUCT.
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BASF AND THE SELLER DISCLAIM ANY
 LIABILITY FOR CONSEQUENTIAL, EXEMPLARY, SPECIAL OR INDIRECT DAMAGES RESULTING
FROM THE USE OR HANDLING OF THIS PRODUCT.
BASF and the Seller offer this product, and the Buyer and User accept it, subject to the foregoing Conditions of
Sale and Warranty which may be varied only by agreement in writing signed by a duly authorized representative
of BASF . 1108
[OPTIONAL marketing claim: Powered by Glu-L TM Technology]
© 2025 BASF Agricultural Solutions US LLC
All rights reserved .
007969-00500 .20241218d .NVA 2024-04-0691-0384
Supersedes: NVA 2024-04-0691-0383
Supplemental: NVA 2024-04-0691-0407
BASF Agricultural Solutions US LLC
2 TW Alexander Drive
Research Triangle Park, NC 27713
Glu-L is a trademark of BASF.
Liberty, LibertyLink, LibertyLink design, and Noventa are registered trademarks of BASF.

30
APPENDIX
IMPORTANT NOTE:
BASF L-Glufosinate- Ammonium 211 herbicide has different rate structures than other glufosinate-ammonium
 containing products . Pay careful attention to the rate requirements on the label . You must read and follow the
BASF L-Glufosinate- Ammonium 211 label before using .

BASF Agricultural Solutions US LLC
2 TW Alexander Drive
Research Triangle Park, NC 27713


Supplemental Label BASF L-Glufosinate-Ammonium 211
Herbicide
Alternate Brand Names: Liberty® ULTRA Herbicide, Liberty® ULTRA, Noventa® ULTRA,
Noventa® ULTRA Herbicide, Liberty® ULTRA Herbicide – Powered by Glu-L™ Technology,
Liberty® ULTRA – Powered by Glu-L™ Technology
[OPTIONAL marketing claim: Powered by Glu-L™ Technology]
For increased use rate in corn, cotton, canola, and soybean
This supplemental label expires March 19, 2027, and must not be used or distributed after this date.
Active Ingredient:
Glufosinate-P-Ammonium* ............................................................................................................................... 18.7%**
Other Ingredients: ........................................................................................................................................... 81.3%
Total: ................................................................................................................................................................ 100.0%
 * CAS Number 73777-50-1
** Equivalent to 1.76 pounds of active ingredient per U.S. gallon; equivalent to 1.61 pounds per U.S. gallon acid equivalent, as glufosinate-P.

EPA Reg. No. 7969-500
DANGER/PELIGRO

Directions For Use
• It is a violation of federal law to use this product in a manner inconsistent with its labeling.
• The supplemental labeling and the entire BASF L-Glufosinate-Ammonium 211 herbicide container label, EPA
Reg. No. 7969-500, must be in possession of the user at the time of application.
• Read the label affixed to the container for BASF L-Glufosinate-Ammonium 211 before applying.
• Use of BASF L-Glufosinate-Ammonium 211 according to this labeling is subject to the use precautions,
limitations, and restrictions imposed by the label affixed to the container for BASF L-Glufosinate-Ammonium 211.
9.2.3 Ground Boom Spray Drift Buffer Reduction Option
An option to reduce the ground buffer distance to 0 feet is:
• Use of an oil emulsion drift reducing adjuvant that constitutes 0.3% of the volume of the finished spray tank mix.
For other ground boom spray drift buffer reduction options, refer to the container label.
13.0 GENERAL USE RESTRICTIONS (ALL CROPS)
13.1 Application Restrictions
• These restrictions are in addition to the crop-specific restrictions.
• DO NOT apply when winds are gusty or when conditions will favor movement of spray particles off the
desired spray target. See the Spray Drift Management section of this label for additional information on
proper application of BASF L-Glufosinate-Ammonium 211.

Glufosinate-P-Ammonium Group 10 Herbicide

2
• DO NOT use flood jet nozzles, controlled droplet application equipment, or air-assisted spray equipment.
• DO NOT apply BASF L-Glufosinate-Ammonium 211 herbicide when soils are saturated or above field
capacity.
• DO NOT apply BASF L-Glufosinate-Ammonium 211 during rain.
• DO NOT apply using chemigation.
• DO NOT apply this product through any type of irrigation system.
• DO NOT apply aerially in non-glufosinate resistant crops.
• DO NOT apply at lower than the labeled rate.
• DO NOT apply more than the combined maximum annual total for both active ingredients when
glufosinate ammonium and glufosinate-P-ammonium are used on the crop in the same year.
15.0 Crop Specific Directions For Use
15.0 Additional Crop Specific General Restrictions
DO NOT exceed the equivalent of 1.90 lbs glufosinate-ammonium per acre per year from all glufosinate-
containing products.

15.1 Canola [Not registered for use by California]
(cultivars, varieties and/or hybrids, including Brassica napus, Brassica rapa, and Brassica juncea)

15.1.1 LibertyLink® or Glufosinate-resistant Canola In-crop Applications
Application
Use Rate
• Apply 15 to 23 fl ozs/A depending on weed species, size and density per the
Weeds Controlled section. Up to 3 applications (2 in crop, 1 burndown) in crop
may be applied with a minimum of 7 days between applications.
Maximum
per Year
• Up to 46 fl ozs/A may be used per year if no burndown application was used.
• If a burndown application was used the maximum per year is 69 fl ozs/A.
15.1.2 LibertyLink® or Glufosinate-resistant Canola for Seed Propagation
Application
Use Rate • Apply 15 to 23 fl ozs/A.
Maximum
per Year • Maximum per year is 69 fl ozs/A.
15.1.3 Burndown Use Prior to Planting or Prior to Emergence of LibertyLink® or
Glufosinate-resistant Canola
Application
Use Rate
• Apply 19 to 34 fl ozs/A depending on weed species and intention of post application
use.
15.1.4 Crop Specific Restrictions – Canola
• DO NOT use on LibertyLink or glufosinate-resistant canola in the states of Alabama, Delaware,
Georgia, Kentucky, Maryland, New Jersey, North Carolina, South Carolina, Tennessee, Virginia, and
West Virginia.
• DO NOT use in Hawaii and Puerto Rico except for use on LibertyLink or glufosinate-resistant canola
for seed propagation.
• DO NOT apply BASF L-Glufosinate-Ammonium 211 within 65 days of harvesting LibertyLink or
glufosinate-resistant canola.
• DO NOT graze the treated crop or cut for hay.
• DO NOT apply BASF L-Glufosinate-Ammonium 211 if canola shows injury from prior herbicide
applications or environmental stress (drought, excessive rainfall, etc.).
• DO NOT apply more than 23 fl ozs/A (0.32 lb ai/A) in a single application for in crop use.
• DO NOT apply more than 2 in-crop applications per year.
• DO NOT apply more than 3 applications per year, including burndown applications.

3
• DO NOT apply more than 34 fl ozs/A (0.47 lb ai/A) in a single application for burndown use.
• DO NOT allow a retreatment interval of less than 7 days.
• DO NOT apply more than three applications of BASF L-Glufosinate-Ammonium 211 herbicide to
LibertyLink® or glufosinate-resistant canola for seed propagation.
• If applying to canola for seed propagation, DO NOT use treated canola seed for food, feed or oil
purposes.
• DO NOT make more than 1 application per year for burndown use for LibertyLink or glufosinate-
resistant canola.
• DO NOT apply more than 69 fl ozs/A (0.95 lb ai/A) per year for LibertyLink or glufosinate-resistant
canola.
• These crop-specific restrictions are in addition to the Section 13.0 General Use Restrictions (All
Crops).
15.2.1 LibertyLink® or Glufosinate-resistant Field Corn and LibertyLink® or Glufosinate-
resistant Silage Corn In-crop Applications
Application
Use Rate
• Apply 19 to 34 fl ozs/A depending on weed species, size and density per the
Weeds Controlled section.
Maximum
per Year • 69 fl ozs/A
15.2.2 LibertyLink® or Glufosinate-resistant Field or Silage Corn for Seed Propagation
Application
Use Rate • Apply 17.5 fl ozs/A.
Maximum
per Year • 35 fl ozs/A
15.2.3 Burndown Use Prior to Planting or Prior to Emergence of LibertyLink® or
Glufosinate-resistant Field or Silage Corn
Burndown
(fl ozs/A)
Additional In-crop Applications if a
Burndown Application Made
Maximum Per Year
(fl ozs/A)
24 to 34 Up to 2 applications at 19 to 34 fl ozs/A 69
15.2.4 Crop Specific Restrictions – Field and Silage Corn
• DO NOT apply BASF L-Glufosinate-Ammonium 211 within 60 days of harvesting corn forage and
within 70 days of harvesting corn grain and corn fodder.
• DO NOT apply more than 69 fl ozs/A (0.95 lb ai/A) of BASF L-Glufosinate-Ammonium 211 on
LibertyLink or glufosinate-resistant field or silage corn per year.
• DO NOT apply more than 2 in-crop applications per year.
• DO NOT apply more than 3 applications per year, including burndown applications, when using less
than the maximum rate.
• DO NOT use nitrogen solutions as spray carriers.
• DO NOT apply BASF L-Glufosinate-Ammonium 211 if corn shows injury from prior herbicide
applications or environmental stress (drought, excessive rainfall, etc.).
• DO NOT apply more than 34 fl ozs/A (0.47 lb ai/A) in a single application except for corn grown for
seed propagation.
• DO NOT apply more than 17.5 fl ozs/A (0.24 lb ai/A) in a single application for corn grown for seed
propagation.
• DO NOT allow a retreatment interval of less than 7 days for in-crop use.
• DO NOT allow a retreatment interval of less than 10 days for corn seed propagation use.
• DO NOT use on LibertyLink or glufosinate-resistant field corn/silage corn grown in California.
• DO NOT apply more than 2 applications for corn seed propagation per year.
• DO NOT apply more than 34 fl ozs/A (0.47 lb ai/A) in a single application for burndown in LibertyLink
or glufosinate-resistant Field or silage corn.

4
• DO NOT make more than 1 application per year for burndown use for LibertyLink® or glufosinate-
resistant Field or silage corn.
• DO NOT use in Hawaii and Puerto Rico except for use on LibertyLink or Glufosinate-resistant Field
Corn (field and silage) for Seed Propagation.
• These crop-specific restrictions are in addition to the Section 13.0 General Use Restrictions (All
Crops).
15.4.1 LibertyLink® or Glufosinate-resistant Cotton In-crop Applications
Application
Use Rate
• Apply 19 to 34 fl ozs/A depending on weed species, size, and density per the
Weeds Controlled section.
Maximum
per Year • 69 fl ozs/A
15.4.2 LibertyLink® or Glufosinate-resistant Cotton for Seed Propagation
Application
Use Rate • Apply 19 to 34 fl ozs/A.
Maximum
per Year • 69 fl ozs/A
15.4.3 Burndown Use Prior to Planting or Prior to Emergence of LibertyLink® or
Glufosinate-resistant Cotton
Burndown
(fl ozs/A)
Additional In-crop Applications if a
Burndown Application Made
Maximum Per Year
(fl ozs/A)
19 to 34 Up to 2 applications at 19 to 34 fl ozs/A 69
15.4.4 Non-glufosinate-resistant Cotton In-crop Applications (Directed Application with
Hooded Sprayer)
Application
Use Rate
• Apply 19 to 34 fl ozs/A per application depending on weed species, size and
density per the Weeds Controlled section.
Maximum
per Year • 69 fl ozs/A
15.4.5 Crop Specific Restrictions – Cotton
• DO NOT apply BASF L-Glufosinate-Ammonium 211 herbicide to cotton in Florida, south of Tampa
(Florida Route 60), or in Hawaii or Puerto Rico, except for test plots, breeding nurseries or seed
propagation.
• DO NOT apply BASF L-Glufosinate-Ammonium 211 within 70 days prior to cotton harvest.
• DO NOT apply more than 34 fl ozs/A (0.47 lb ai/A) per application for burndown use.
• DO NOT make more than 1 burndown application per year for LibertyLink or glufosinate-resistant
cotton.
• DO NOT apply more than 34 fl ozs/A (0.47 lb ai/A) per application for in-crop use including seed
propagation.
• DO NOT apply more than 69 (0.95 lb ai/A) fl ozs per acre per year.
• DO NOT apply more than 3 applications per year, including burndown applications, when using less
than the maximum rate.
• If a burndown application is made, DO NOT apply more than 2 in-crop applications per year.
• DO NOT allow a retreatment interval of less than 7 days.
• Refer to Rotational Crop Restrictions section of the container label for the appropriate rotational
crop plant-back intervals.
• DO NOT apply more than 34 fl ozs/A (0.47 lb ai/A) per application.
• DO NOT apply in crop to non-glufosinate-resistant cotton except with a hooded sprayer.
• DO NOT tank mix BASF L-Glufosinate-Ammonium 211 with both an EC formulation herbicide and
acephate insecticide.

5
• These crop-specific restrictions are in addition to the Section 13.0 General Use Restrictions (All
Crops).
15.5.1 LibertyLink® or Glufosinate-resistant Soybean In-crop Applications
Application
Use Rate
• Apply 19 to 34 fl ozs/A depending on weed species, size and density per the
Weeds Controlled section.
Maximum
per Year • 69 fl ozs/A
15.5.2 LibertyLink® or Glufosinate-resistant Soybean for Seed Propagation
Application
Use Rate • Apply 19 to 34 fl ozs/A depending on size and density.
Maximum
per Year • 69 fl ozs/A
15.5.3 Burndown Use Prior to Planting or Prior to Emergence of LibertyLink® or
Glufosinate-resistant Soybean
Burndown
(fl ozs/A)
Additional In-crop Applications if a
Burndown Application Made
Maximum Per Year
(fl ozs/A)
19 to 34 Up to 2 applications at 19 to 34 fl ozs/A 69
15.5.4 Crop Specific Restrictions – Soybean
• DO NOT apply BASF L-Glufosinate-Ammonium 211 herbicide within 70 days of harvesting
LibertyLink or glufosinate-resistant soybean resistant soybean seed.
• DO NOT apply more than 69 fl ozs/A (0.95 lb ai/A) of BASF L-Glufosinate-Ammonium 211 on
LibertyLink or glufosinate-resistant soybeans per year.
• DO NOT apply more than 34 fl ozs/A (0.47 lb ai/A) in a single application.
• DO NOT apply more than 3 applications per year, including burndown applications, when using
less than the maximum rate.
• DO NOT make more than 2 in-crop applications per acre per year.
• DO NOT make more than 1 application per year for burndown use for LibertyLink or glufosinate-
resistant soybean.
• DO NOT graze the treated crop or cut for hay.
• DO NOT apply BASF L-Glufosinate-Ammonium 211 if soybeans show injury from prior
herbicide applications or environmental stress (drought, excessive rainfall, etc.).
• DO NOT allow a retreatment interval of less than 5 days.
• DO NOT use in Hawaii and Puerto Rico except for use on LibertyLink or Glufosinate-resistant
soybean for seed propagation.
• These crop-specific restrictions are in addition to the Section 13.0 General Use Restrictions
(All Crops).

6
15.6 Burndown Use Prior to Planting or Prior to Emergence of Non-glufosinate
resistant crops (Canola, Field Corn, Sweet Corn, Cotton, Soybean)
Crop Burndown
(fl ozs/A)
Additional In-crop Applications
if a Burndown Application Made
Maximum
Per Year
(fl ozs/A)
Non-glufosinate-resistant
Canola, Field corn, or Soybean 19 to 34 None 34
Non-glufosinate-resistant
Cotton 19 to 34 1 application at 21 to 34 fl ozs/A 69
Non-glufosinate-resistant
Sweet corn 19 to 29 None 29
15.6 Restrictions to the Dir ections for Burndown Use in/on Non-glufosinate Resistant
Canola, Field corn, Cotton or Soybean
• DO NOT apply more than 34 fl ozs/A (0.47 lb ai/A) in a single application for burndown in non-
glufosinate-resistant canola, non-glufosinate-resistant field corn, non-glufosinate-resistant cotton, or
non-glufosinate-resistant soybean.
• DO NOT apply more than 34 fl ozs/A (0.47 lb ai/A) per year for non-glufosinate-resistant canola, non-
glufosinate-resistant field corn, or non-glufosinate-resistant soybean.
• DO NOT apply more than 69 fl ozs/A (0.95 lb ai/A) per year for non-glufosinate-resistant cotton.
15.7 Fallow Fields and Postharvest Uses Asso ciated with Canola, Field Corn, Sweet
Corn, Cotton and Soybean Production [Not registered for use by California]
 Tank mixes with 2,4-D, glyphosate, clethodim or residual herbicides can be made with BASF L-
Glufosinate-Ammonium 211 herbicide to enhance total weed control. When using BASF L-
Glufosinate-Ammonium 211 in tank mix combinations, follow the precautions and directions of use of
the most restrictive label.
 Restrictions to the Directions for Use in Fallow Fields and Postharvest
• DO NOT apply more than 34 fl ozs/A (0.47 lb ai/A) in a single application to fallow fields or postharvest
in a single application per year.

7
Conditions of Sale and Warranty
The Directions For Use of this product reflect the opinion of experts based on field use and tests. The directions are
believed to be reliable and must be followed carefully. However, it is impossible to eliminate all risks inherently
associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences may result
because of such factors as weather conditions, presence of other materials, or use of the product in a manner
inconsistent with its labeling, all of which are beyond the control of BASF Agricultural Solutions US LLC (hereafter
“BASF”) or the Seller. To the extent consistent with applicable law, all such risks shall be assumed by the Buyer.
BASF warrants that this product conforms to the chemical description on the label and is reasonably fit for the
purposes referred to in the Directions For Use, subject to the inherent risks, referred to above.
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BASF MAKES NO OTHER EXPRESS OR IMPLIED
WARRANTY OF FITNESS OR MERCHANTABILITY OR ANY OTHER EXPRESS OR IMPLIED WARRANTY.
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BUYER’S EXCLUSIVE REMEDY AND BASF’S
EXCLUSIVE LIABILITY, WHETHER IN CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY, OR OTHERWISE,
SHALL BE LIMITED TO REPAYMENT OF THE PURCHASE PRICE OF THE PRODUCT.
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BASF AND THE SELLER DISCLAIM ANY LIABILITY
FOR CONSEQUENTIAL, EXEMPLARY, SPECIAL OR INDIRECT DAMAGES RESULTING FROM THE USE OR
HANDLING OF THIS PRODUCT.
BASF and the Seller offer this product, and the Buyer and User accept it, subject to the foregoing Conditions of Sale
and Warranty which may be varied only by agreement in writing signed by a duly authorized representative of BASF.
 1108

Glu-L is a trademark of BASF.

Liberty, LibertyLink, LibertyLink design, and Noventa are registered trademarks of BASF.


© 2025 BASF Agricultural Solutions US LLC
All rights reserved.

007969-00500.20241217d.NVA 2024-04-0691-0407

BASF Agricultural Solutions US LLC
2 TW Alexander Drive
Research Triangle Park, NC 27713