crop-chem-docs/corpus/epa_ppls/8033-23.md

# ASSAIL 70WP INSECTICIDE

- EPA Reg No: **8033-23**
- Registrant: NIPPON SODA CO., LTD.
- Signal word: Caution
- Active ingredients: Acetamiprid (70%)
- Label accepted: 2021-06-11
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/008033-00023-20210611.pdf

---
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY
 WASHINGTON, DC 20460


OFFICE OF CHEMICAL SAFETY
AND POLLUTION PREVENTION

June 11, 2021

Kristen B. Knox
Regulatory Affairs Manager
Nippon Soda Co., Ltd.
c/o Nisso America Inc.
379 Thornall Street, 5th Floor
Edison, NJ 08837

Subject: Label Amendment – Adding “Not approved for this use in California” to
watercress and revising the “COTTONSEED (Crop Subgroup 20C)” heading to
read “COTTON (within Crop Subgroup 20C)”
 Product Name: ASSAIL® 70 WP Insecticide
 EPA Registration Number: 8033-23
 Application Date: March 4, 2021
 Decision Number: 576356

Dear Kristen B. Knox:

The amended label referred to above, submitted in connection with registration under the Federal
Insecticide, Fungicide and Rodenticide Act, as amended, is acceptable.

A stamped copy of your labeling is enclosed for your records. This labeling supersedes all
previously accepted labeling. You must submit one copy of the final printed labeling before you
release the product for shipment with the new labeling. In accordance with 40 CFR 152.130(c),
you may distribute or sell this product under the previously approved labeling for 18 months
from the date of this letter. After 18 months, you may only distribute or sell this product if it
bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is
defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3.

Should you wish to add/retain a reference to the company's website on your label, then please be
aware that the website becomes labeling under the Federal Insecticide Fungicide and Rodenticide
Act and is subject to review by the Agency. If the website is false or misleading, the product
would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40
CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In
addition, regardless of whether a website is referenced on your product's label, claims made on
the website may not substantially differ from those claims approved through the registration
process. Therefore, should the Agency find or if it is brought to our attention that a website
contains false or misleading statements or claims substantially differing from the EPA approved
registration, the website will be referred to the EPA's Office of Enforcement and Compliance.

Your release for shipment of the product constitutes acceptance of these conditions. If these
conditions are not complied with, the registration will be subject to cancellation in accordance

Page 2 of 2
EPA Reg. No. 8033-23
Decision No.576356


with FIFRA section 6(e). If you have any questions, please contact Ralph Narain by phone at
703-347-8750, or via email at Narain.Ralph@epa.gov.


 Sincerely,


 Venus Eagle, Product Manager 01
 Invertebrate & Vertebrate Branch 3
Registration Division (7505P)
Office of Pesticide Programs


Enclosure: Stamped label

Clean copy DRAFT 6-8-21

1
Acetamiprid GROUP 4A INSECTICIDE
ASSAIL® 70 WP Insecticide
[Alternate brand name: Assail® 70 WSP Insecticide]*
For Agricultural Use Only
ACTIVE INGREDIENT: Acetamiprid, (E)- N1 -[(6-chloro-3-pyridyl)methyl]-N2-cyano-N1-methyl acetamidine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70% by wt.
OTHER INGREDIENTS: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30% by wt.
TOTAL: ..............................................................................................................................................................................................................100% by wt.
EPA Reg. No. 8033-23 EPA Est. No.
KEEP OUT OF REACH OF CHILDREN
CAUTION
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle.
(If you do not understand the label find someone to explain it to you in detail.)
EMERGENCY TELEPHONE NUMBERS:
CHEMTREC: (800) 424-9300
MEDICAL: (866) 673-6671 Rocky Mountain Poison Control Center
FIRST AID
IF
SWALLOWED:
Immediately call a poison control center or doctor for treatment advice.
Do not induce vomiting unless told to do so by a poison control center or doctor.
Have person sip a glass of water if able to swallow.
Do not give anything by mouth to an unconscious person.
IF IN EYES: Hold eye open and rinse slowly and gently with water for 15 – 20 minutes.
Remove contact lenses, if present, after the first 5 minutes, then continue rinsing.
Call a poison control center or doctor for treatment advice.
IF ON SKIN OR
CLOTHING:
Take off contaminated clothing.
Rinse skin immediately with plenty of water for 15 – 20 minutes.
Call a poison control center or doctor for treatment advice.
IF INHALED: Move person to fresh air.
If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth-to-mouth if
possible.
Call a poison control center or doctor for treatment advice.
Have the product container or label with you when calling a poison control center or doctor or going for treatment.
NOTE TO PHYSICIAN: There is no specific antidote. All treatment should be based on observed signs and symptoms of distress in the
patient. Overexposure to materials other than this product may have occurred.
Net Contents: ____________ Batch No. __________
Nippon Soda Co., Ltd.
c/o Nisso America Inc.
379 Thornall Street, 5th Floor.
Edison, NJ 08837
06/11/2021
8033-23

Clean copy DRAFT 6-8-21

2
*Note to Reviewer: When the product is used in a water soluble package, only the language pertaining to water soluble packaging will appear as per the
bracketed “[OR where on WSP]
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS and DOMESTIC ANIMALS
CAUTION: Harmful if swallowed or absorbed through skin. Causes moderate eye irritation. Avoid contact with eyes, skin or clothing. Harmful if inhaled. Avoid breathing vapors or spray
mist. Keep out of reach of children and domestic animals.
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Mixers, loaders, applicators, and other handlers must wear long-sleeved shirts, long pants, shoes plus socks, chemical resistant gloves made of the following waterproof material: nitrile
rubber PLOV, neoprene rubber PLOs, barrier laminate, polyvinyl chloride (PVC) PLOV, or viton PLOVand chemical resistant headgear for overhead exposure.
In addition to the above, for aerial applications, mixers and loaders must wear a filtering face piece, half piece or full-face NIOSH approved particulate respirator (TC-84A) with any R or P
filter.
Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product’s concentrate. Do not reuse them. Follow manufacturer’s instructions
for cleaning/maintaining PPE. If there are no such instructions for washables, use detergent and hot water. Keep and wash PPE separately from other laundry.
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides
[40 CFR 170.240 (d) (4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS.
[OR where on WSP: Assail 70 WSP Insecticide]
[ENGINEERING CONTROLS STATEMENT
Water soluble packets, when used correctly, qualify as a closed mixing/loading system under the Worker Protection Standard [40 CFR 170.607(d)]. Mixers and loaders handling this product
while it is enclosed in intact water-soluble packets may elect to wear reduced PPE of long-sleeved shirt, long pants, shoes, so cks, and chemical-resistant gloves. When reduced PPE is
worn because a closed system is being used, handlers must be provided all PPE specified above for “applicators and other handlers” and have such PPE immediately available for use in
an emergency, such as a spill or equipment break-down.]
User Safety Recommendations
Users should wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on
clean clothing. Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing.
ENVIRONMENTAL HAZARDS
This product is toxic to birds and aquatic invertebrates. This product is toxic to bees exposed to direct treatment. Do not apply this product while bees are foraging in the treatment area.
Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark. Do not contaminate water when disposing of equipment
washwater or rinsate. Do not contaminate water used for irrigation or domestic purposes.
GROUND WATER ADVISORY
This chemical has properties and characteristics associated with chemicals detected in ground water. This chemical may leach into ground water if used in areas
where soils are permeable, particularly where the water table is shallow.
SURFACE WATER ADVISORY
This product may impact surface water quality due to runoff of rain water. This is especially true for poorly draining soils and soils with shallow ground water. This
product is classified as having high potential for reaching surface water via runoff for several months or more after application. Avoid accidental or intentional
application of this product to ditches, swales, drainage ways or impervious surfaces such as driveways. Runoff of this product to surface water will be reduced by
avoiding applications when rainfall is forecasted to occur within 48 hours.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in any manner inconsistent with its labeling.
Read entire label before using this product.
Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any
requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation.
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This standard contains requirements for the protection of agricultural
workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency
assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and restricted-entry intervals. The
requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard.
Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours.
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or
water, is coveralls, waterproof gloves (QLWULOHUXEEHUPLOVQHRSUHQHrubber PLOV, barrier laminate, polyvinyl chloride (PVC) PLOV, or viton PLOVand shoes plus socks.
STORAGE AND DISPOSAL

Clean copy DRAFT 6-8-21

3
Do not contaminate water, food or feed by storage or disposal.
PESTICIDE STORAGE
Store unused product in a cool, ventilated, dry, locked area. Do not allow prolonged storage in areas where temperatures freqXHQWO\H[FHHGÛ)Û&
NEVER TRANSFER THIS PRODUCT TO ANOTHER CONTAINER FOR STORAGE.
PESTICIDE DISPOSAL
Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility.
CONTAINER HANDLING
Non-refillable container. Do not reuse or refill this container. Triple rinse container (or equivalent) promptly after emptyi ng. Triple rinse as follows: Empty the remaining contents into
application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container ¼ full with water and recap. Shake for 10 seconds. Pour rinsate into
application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to dri p. Repeat this procedure two more times. Offer for
recycling if available
COMPATIBILITY / TANK MIXING
ASSAIL 70 WP Insecticide [OR where on WSP: Assail 70 WSP Insecticide], when diluted with an equal volume of water, is physically compatible with a wide range of commonly used
spray products, but the full range of compatibilities under local conditions is not known. Therefore, it is essential that before using ASSAIL 70 WP Insecticide [OR where on WSP: Assail
70 WSP Insecticide] in any tank mixture the compatibility of the mixture be established. Add a small amount of this product to an equal volume of water in a small container and then add
the other pesticide or spray product and mix thoroughly. DO NOT USE MIXTURES THAT CURDLE, PRECIPITATE, OR GREASE. FOR BEST RESULTS, USE SPRAY MIXTURES
IMMEDIATELY AFTER MIXING WITH ADEQUATE AGITATION. It is the pesticide user’s responsibility to ensure that all products in a tank mix are registered for the intended use. Users
must follow the most restrictive directions and precautionary language of the products of the mixture (for example, first aid from one product, spray drift management from another).
Special Instructions for Tank Mixing ASSAIL 70 WP Insecticide
When tank mixing ASSAIL 70 WP Insecticide [OR where on WSP: Assail 70 WSP Insecticide] with other products, introduce the products into the tank in the following order: (1) water
soluble packets (2) wettable powders (such as ASSAIL 70 WP Insecticide) (3) water dispersable granules (4) flowable liquids (5) emulsifiable concentrates and (6) adjuvants and/or oils
(do not use stickers). Always allow each product to fully disperse before adding the next product.
Mixing and Application Instructions for ASSAIL 70 WP Insecticide
ASSAIL 70 WP Insecticide is a dry powder formulation that readily disperses in water to form a spray, which may be applied by ground or air.
1. Plan ahead. Prepare only enough spray mixture as can be applied on the day of mixing.
2. Fill tank ¼ - ½ full with the required amount of total spray volume of water.
3. Begin agitation and add product. The jug should be given a good hard shake to fluff the product before measuring. When pouring into the measuring cone, do not tamp down. The cone
is calibrated for the fluffed product.
4. Continue to fill tank while directing a stream of water onto any floating product.
5. Allow mixing in tank for 2 minutes after filling or until thoroughly mixed before applying. 6. Maintain continuous agitation during mixing and application to assure uniform suspension. If
mixture sits without agitation for extended periods, agitate the mixture for at least 10 minutes before use.
7. Equip spray system with a 50-mesh inline filter, which will protect nozzles that are typically used. Nozzles may also be equipped with 50-mesh nozzle filters or 25 to 50 mesh
(equivalent) slotted nozzle filters.
8. ASSAIL 70 WP Insecticide is unstable in water pH below 4 and above 9. If necessary, buffer water to obtain optimum pH range.
[OR where on WSP: Assail 70 WSP Insecticide]
Special Instructions for Tank Mixing ASSAIL WSP Insecticide. When tank mixing ASSAIL WSP Insecticide with other products, introduce the products into the tank in the following
order: (1) water soluble packets (such as ASSAIL WSP Insecticide), (2) wettable powders, (3) water dispersible granules, (4) flowable liquids, (5) emulsifiable concentrates, and (6)
adjuvants and/or oils. Always allow each product to fully disperse before adding the next product. Products containing boron will interfere with film solubility of the water-soluble packets.
If boron products are added to the spray tank, add the ASSAIL WSP Insecticide soluble packets first, making sure they are completely dissolved before adding any boron products.
Instructions for Using Water Soluble Packages Directly into Spray tanks:
Water Soluble Packages (WSPs) are designed to dissolve in water. Agitation may be used, if necessary, to help dissolve the WSP. Failure to follow handling and mixing instructions can
increase your exposure to the pesticide products in WSPs. WSPs, when used properly, qualify as a closed mixing/loading system under the Agricultural Worker Protection Standard [40
CFR 170.607(d)].
Handling Instructions
Follow these steps when handling pesticide products in WSPs.
1. Mix in spray tank only.
2. Handle WSP(s) in a manner that protects package from breakage and/or unintended release of contents. If package is broken, put on PPE required for clean-up and then continue with
mixing instructions.
3. Keep the WSP(s) in outer packaging until just before use.
4. Keep the WSP dry prior to adding to the spray tank.
5. Handle with dry gloves and according to the label instructions for PPE.
6. Keep WSP intact. Do not cut or puncture WSP.
7. Reseal the WSP outer packaging to protect any unused WSP(s).
Mixing Instructions
Follow the steps below when mixing this product, including if tank mixed with other pesticide products. If being tank mixed, the mixing directions 1 through 9 below take precedence over
the mixing directions of the other tank mix products. WSPs may, in some cases, be mixed with other pesticide products so long as the directions for use of all mixed products do not
conflict. Do not tank mix this product with products that prohibit tank mixing or have conflicting mixing directions.
1. If a basket or strainer is present in the tank hatch, remove prior to adding the WSP to the tank.
2. Fill tank with water to approximately one-third to one-half of the desired final volume of spray.
3. Stop adding water and stop any agitation.

Clean copy DRAFT 6-8-21

4
4. Place intact/unopened WSP(s) into the tank.
5. Do not spray water from a hose or fill pipe to break or dissolve the WSP(s).
6. Start mechanical and recirculation agitation from the bottom of tank without using any overhead recirculation, if possible. If overhead recirculation cannot be turned off, close the hatch
before starting agitation.
7. Dissolving the WSP(s) may take up to 5 minutes or longer, depending on water temperature, water hardness and intensity of agitation.
8. Stop agitation before tank lid is opened.
9. Open the lid to the tank, exercising caution to avoid contact with dusts or spray mix, to verify that the WSPs have fully dissolved and the contents have been thoroughly mixed into the
solution.
10. Do not add other allowed products or complete filling the tank until the bags have fully dissolved and pesticide is thoroughly mixed.
11. Once the WSP have fully dissolved and any other products have been added to the tank, resume filling the tank with water to the desired level, close the tank lid, and resume agitation.
12. Use the spray solution when mixing is complete.
13. Maintain agitation of the diluted pesticide mix during transport and application.
14. It is unlawful to use any registered pesticide, including WSPs, in a manner inconsistent with its label.
NOTE:
• Plan ahead. Prepare only enough spray mixture as can be applied on the day of mixing
• Add buffering agent if required
• Equip spray system with a 50-mesh inline filter, which will protect nozzles that are typically used. Nozzles may also be equipped with 50-mesh nozzle filters or 25 to 50 mesh (equivalent)
slotted nozzle filters.
• ASSAIL 70 WSP Insecticide is unstable in water pH below 4 and above 9. If necessary, buffer water to obtain optimum pH range.
DIRECTIONS FOR CHEMIGATION
Instructions
For chemigation use only on cranberries and on potatoes after foliage has emerged and only through overhead sprinkler irrigation systems.
Apply this product only through overhead sprinkler irrigation systems including center pivot, lateral move, side (wheel) roll, solid set, or hand move irrigation systems after potato foliage
has emerged. Do not apply this product through any other type of irrigation system. Crop injury, lack of effectiveness, or illegal pesticide residues in the crop can result from non-uniform
distribution of treated water. If you have questions about calibration, you should contact State Extension Service specialists, equipment manufacturers or other experts. A person
knowledgeable of the chemigation system and responsible for its operation or under the supervision of the responsible person, shall shut the system down and make necessary
adjustments should the need arise.
The overhead sprinkler chemigation system must contain a functional check valve, vacuum relief valve, and low pressure drain appropriately located on the irrigation pipeline to prevent
water source contamination from back flow. The pesticide injection pipeline must contain a functional, automatic, quick-closing check valve to prevent the flow of fluid back toward the
injection pump. The pesticide injection pipeline must also contain a functional, normally closed, solenoid-operated valve located on the intake side of the injection pump and connected to
the system interlock to prevent fluid from being withdrawn from the supply tank when the irrigation system is either automatically or manually shut down. The system must contain
functional interlocking controls to automatically shut off the pesticide injection pump when the water pump motor stops. The irrigation line or water pump must include a functional
pressure switch which will stop the water pump motor when the water pressure decreases to the point where pesticide distribution is adversely affected. Systems must use a metering
pump, such as a positive displacement injection pump (e.g., diaphragm pump) effectively designed and constructed for materials that are compatible with pesticides and capable of being
fitted with a system interlock.
Do not connect an irrigation system (including greenhouse systems) used for pesticide application to a public water system unless the pesticide label-prescribed safety devices for public
water systems are in place. Public water system means a system for the provision to the public of piped water for human consumption if such system has at least 15 service connections
or regularly serves an average of at least 25 individuals daily at least 60 days out of the year. Chemigation systems connected to public water systems must contain a functional,
reduced-pressure zone, back flow preventer (RPZ) of the functional equivalent in the water supply line upstream from the point of pesticide introduction. As an option to the RPZ, the
water from the public water system should be discharged into a reservoir tank prior to pesticide introduction. There shall be a complete physical break (air gap) between the flow outlet
end of the fill pipe and the top or overflow rim of the reservoir tank of at least twice the inside diameter of the fill pipe. The pesticide injection pipeline must contain a functional, automatic,
quick-closing check valve to prevent the flow of fluid back toward the injection. The pesticide injection pipeline must contain a functional, normally closed, solenoid-operated valve
located on the intake side of the injection pump and connected to the system interlock to prevent fluid from being withdrawn from the supply tank when the irrigation system is either
automatically or manually shut down. The system must contain functional interlocking controls to automatically shut off the pesticide injection pump when the water pump motor stops, or
in cases where there is no water pump, when the water pressure decreases to the point where pesticide distribution is adversely affected. Systems must use a metering pump, such as a
positive displacement injection pump (e.g., diaphragm pump) effectively designed and constructed of materials that are compatible with pesticides and capable of being fitted with a
system interlock.
Do not apply when wind speed favors drift beyond the area intended for treatment.
Application Instructions
Observe the requirements in the System Requirements section above. Apply ASSAIL 70 WP Insecticide [OR where on WSP: Assail 70 WSP Insecticide] only through systems
containing anti-siphon and check valves designed to prevent water source contamination or overflow of the mix tank and containing interlocking controls between the metering device and
the water pump to insure simultaneous shut-off. Maintain a gentle continuous agitation in mix tank during mixing and application to assure a uniform suspension. Greater accuracy in
calibration and distribution will be achieved by injecting a larger volume of a more dilute suspension per unit time. Application of more than recommended quantities of irrigation water
per acre may result in decreased product performance. Do not apply when wind speed favors drift, when system connections or fittings leak, when nozzles do not provide uniform
distribution or when lines containing the product cannot be flushed and must be dismantled and drained. In a center pivot system, block the nozzle set nearest the well/pivot/injection unit
to prevent spray being applied to this area. Use of end guns which deliver uneven distribution of water is not recommended. Wh ere sprinkler distribution patterns do not overlap
sufficiently, unacceptable insect control may result. Allow sufficient time for pesticide to be flushed through all lines and all nozzles before turning off irrigation water. ASSAIL 70 WP
Insecticide [OR where on WSP: Assail 70 WSP Insecticide] may be applied in conjunction with chemically neutral liquid fertilizers. Application in conjunction with highly alkaline fertilizers,
such as aqueous ammonia, may cause a degradation of the pesticide, resulting in reduced performance and should be avoided.
Spray Preparation
Remove scale, pesticide residues, and other foreign matter from the chemical tank and entire injector system. Flush with clean water. Prepare a solution of ASSAIL 70 WP Insecticide
[OR where on WSP: Assail 70 WSP Insecticide] in a mix tank. Fill the tank with ½ or ¾ the desired amount of water. Start mechanical or hydraulic agitation. Slowly add the required
amount of ASSAIL 70 WP Insecticide [OR where on WSP: Assail 70 WSP Insecticide] and then the remaining volume of water.

Clean copy DRAFT 6-8-21

5
Sprinkler Irrigation
Observe all System Requirements and Application Instructions above. Set sprinkler system to deliver a maximum of 0.2 inch of water per acre. Volumes of water higher than this may
reduce efficacy. Start sprinkler and then uniformly inject the solution of ASSAIL 70 WP Insecticide into the irrigation water line so as to deliver the desired rate per acre. The solution of
ASSAIL 70 WP Insecticide [OR where on WSP: Assail 70 WSP Insecticide] should be injected with a positive displacement pump into the main line ahead of a right angle turn to insure
adequate mixing. Retention of ASSAIL 70 WP Insecticide [OR where on WSP: Assail 70 WSP Insecticide] on foliage is necessary for optimum activity. Do not apply when wind speed
favors drift beyond the area intended for treatment. Where sprinkler distributed patterns do not overlap sufficiently, unacceptable insect control may result.
DIRECTIONS FOR AERIAL OR GROUND SPRAY APPLICATION
APPLICATION TIMING
Begin application when insect populations reach recognized economic threshold levels. Consult the Cooperative Extension Service, Professional consultants or other qualified authorities
to determine appropriate threshold levels for treatment in your area.
INFORMATION
ASSAIL 70 WP Insecticide is a 70% wettable powder for the control of many sucking and chewing insects on the crops listed in this label. [OR where on WSP: Assail 70 WSP Insecticide
is a 70% wettable powder for the control of many sucking and chewing insects on the crops listed in this label.] The active ingr edient in ASSAIL 70 WP Insecticide [OR where on WSP:
Assail 70 WSP Insecticide] is acetamiprid, a neonicotinoid insecticide that controls target insects through contact and ingestion. ASSAIL 70WP Insecticide [OR where on WSP: Assail 70
WSP Insecticide] is rapidly absorbed by the plant tissue and quickly moves via systemic translaminar activity to protect the entire leaf. However, thorough spray coverage is essential for
optimal performance. ASSAIL 70 WP Insecticide [OR where on WSP: Assail 70 WSP Insecticide] is rain-fast once the spray solution has dried.
APPLICATION INSTRUCTIONS
ROW CROPS
Apply a minimum finished spray volume of 5 gallons per acre by air or 15 gallons per acre by ground unless otherwise directed under crop specific directions. For best results, it is
important to obtain thorough and uniform spray coverage of the plant. For aerial application, select nozzles and pressure that deliver MEDIUM spray droplets as indicated in nozzle
manufacturer’s catalogs and in accordance with ASABE Standard S-572. The use of spray adjuvants, such as high quality non-ionic or silicone surfactants or methylated seed oils is
recommended to enhance coverage and plant uptake and may improve pest control in certain crops. Please see specific crop use directions. The addition of an adjuvant is recommended
for all applications made to vegetables (except legumes) and to cotton when controlling whiteflies. The use of stickers is not recommended. Some adjuvants can cause adverse effects,
such as spotting or burn to fruit or foliage. Select an adjuvant that will be safe for the target crop. Follow adjuvant use dir ections. Consult your local Extension Service, Crop Advisor or
Nippon Soda Co., Ltd. representative for additional information. Use higher dosage rates for heavy infestations or dense foliage. The specific length of residual control depends on
environmental factors, plant growth, dosage rate, and degree of insect infestation. For foliar banded applications, determine the amount of chemical to use per acre by dividing the band
width by the row width and multiplying by the appropriate broadcast rate.
To clean the sprayer after use, drain and flush with water. Use rinsate on crop according to label instructions or dispose of in an approved manner (See STORAGE AND DISPOSAL).
ORCHARD CROPS
To achieve optimum pest control, it is important to obtain thorough and uniform spray coverage. Choose a finished spray volume appropriate for the size of tree or vine and amount of
foliage which will provide thorough coverage throughout the canopy. For certain pests, also follow recommendations listed under crop specific directions. For aerial application, select
nozzles and pressure that deliver MEDIUM spray droplets as indicated in nozzle manufacturer’s catalogs and in accordance with ASAE Standard S-572. Aerial applications may not
provide as thorough coverage as ground applications.
The use of spray adjuvants, such as high quality non-ionic surfactants, methylated seed or horticultural oils is recommended to enhance coverage and plant uptake and may improve pest
control. The addition of an adjuvant is recommended for all applicat ions to pome fruit when controlling codling moth, oriental fruit moth, and San Jose scale. The use of stickers is not
recommended. Some adjuvants can cause adverse effects, such as s potting or burn to fruit or foliage. Select an adjuvant that wi ll be safe to the target crop. Follow adjuvant use
directions. Consult your local Extension Service, Crop Advisor or Nippon Soda representative for additional information.
Use higher dosage rates within the listed rate range for heavy infestations or dense foliage. The specific length of residual control depends on environmental factors, plant growth, dosage
rate, and degree of insect infestation.
To clean the sprayer after use, drain and flush with water. Use rinsate on crop according to label instructions or dispose of in an approved manner (See STORAGE AND DISPOSAL).
INTEGRATED PEST MANAGEMENT (IPM) USE OF THIS PRODUCT
ASSAIL 70 WP Insecticide [OR where on WSP: Assail 70 WSP Insecticide] has ovicidal, larvicidal, or adulticidal activity against many pests which can be effectively utilized in IPM
programs. Control of important pests coupled with retention of beneficial insects and spiders can offer significant benefits to those producers utilizing integrated pest management
programs.
RESISTANCE MANAGEMENT
Acetamiprid is the active ingredient in ASSAIL 70WP Insecticide[OR where on WSP: Assail 70 WSP Insecticide]. It is a member of a class of chemicals known as neonicotinoids
and within the mode of action Group 4A. Rotating ASSAIL 7OWP Insecticide [OR where on WSP: Assail 70 WSP Insecticide] with insecticides with a different mode of action
(other than Group 4A insecticides) may delay or prevent development of resistance and cross-resistance to ASSAIL and other Group 4A insecticides. Avoid making more than
two (2) consecutive applications of ASSAIL 70 WP Insecticide [OR where on WSP: Assail 70 WSP Insecticide] before rotating to an alternative mode of action insecticide. Foliar
applications of ASSAIL 70 WP Insecticide[OR where on WSP: Assail 70 WSP Insecticide] should be avoided on crops treated with a Group 4A seed treatment or soil-applied
insecticide until a foliar application of a non-Group 4A insecticide (insecticide with a different mode of action) has been applied between these applications. The use of
ASSAIL 70WP Insecticide [OR where on WSP: Assail 70 WSP Insecticide] should conform to the resistance management guidelines established in your area. Consult your
agricultural advisor, PCA, university or extension personnel for recommended pest and resistance management practices for your area. Use recommended IPM practices in
your pest management system. Use of rates below the minimum rate listed for each particular insect pest may enhance the development of resistance and should be
avoided.

Clean copy DRAFT 6-8-21

6
To prevent development of insect resistance, do not apply ASSAIL 70 WP Insecticide[OR where on WSP: Assail 70 WSP Insecticide] to crops listed on this label when grown in
a greenhouse.
SPRAY DRIFT
Avoid spray drift. Do not apply when weather conditions may cause drift. Do not allow this product to drift on to non-target areas. To avoid spray drift, DO NOT apply aerially when wind
speed
is greater than 10 mph or during periods of temperature inversions. For aerial application, select nozzles and pressure that deliver MEDIUM spray droplets as indicated in nozzle
manufacturer’s
catalogs and in accordance with ASAE Standard S-572. AVOIDING SPRAY DRIFT AT THE APPLICATION SITE IS THE RESPONSIBILITY OF THE APPLICATOR
. Do not cultivate or
plant crops within 10 feet of aquatic areas as to allow growth of a vegetative filter strip
The interaction of many equipment and weather related factors determines the potential for spray drift. The applicator is responsible for considering all of these factors when making
decisions.
The following drift management requirements must be followed to avoid off-target movement from aerial applications to agricultural crops. These requirements do not apply to forestry
applications, public health uses or to applications using dry formulations. 1. The distance of the outer most nozzles on the boom must not exceed 3/4 the length of the wingspan or rotor.
2. Use the largest droplet size consistent with good pest control. Small droplets are more prone to spray drift and can be minim ized by appropriate nozzle selection, by orienting nozzles
away from the airstream as much as possible, and by avoiding excessive spray boom pressure.
Where states have more stringent regulations, they should be observed.
The applicator should be familiar with and take into account the information covered in the Aerial Drift Reduction Advisory below:
AERIAL DRIFT REDUCTION ADVISORY
[This section is advisory in nature and does not supersede the mandatory label requirements].
INFORMATION ON DROPLET SIZE
The most effective way to reduce drift potential is to apply MEDIUM droplets. The best drift management strategy is to apply the largest droplets that provide sufficient coverage and
control.
Applying larger droplets reduces drift potential, but will not prevent drift if applications are made improperly, or under unfavorable environmental conditions (See Wind, Temperature and
Humidity, and Temperature Inversions).
CONTROLLING DROPLET SIZE
Volume - Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with higher rated flows produce larger droplets.
Pressure - Do not exceed the nozzle manufacturer’s recommended pressures. For many nozzle types lower pressure produces larger droplets. When higher flow rates are needed,
use higher flow rate nozzles instead of increasing pressure.
Number of nozzles - Use the minimum number of nozzles that provide uniform coverage.
Nozzle Orientation – Small droplets are more prone to spray drift and can be minimized by several factors including orienting nozzles away from the airstream. Orienting nozzles so that
the spray is released parallel to the airstream produces larger droplets than other orientations. Significant deflection from horizontal will reduce droplet size and increase drift potential.
Nozzle Type - Use a nozzle type that is designed for the intended application. With most nozzle types, narrower spray angles produce larger droplets. Consider
using low-drift nozzles. Solid stream nozzles oriented straight back produce the largest droplets and the lowest drift.
BOOM LENGTH
For some use patterns, reducing the effective boom length to less than 3/4 of the wingspan or rotor length may further reduce drift without reducing swath width.
APPLICATION HEIGHT
Applications should not be made at a height greater than 10 feet above the top of the target plants unless a greater height is required for aircraft safety. Making applications at the lowest
height that is safe reduces exposure of droplets to evaporation and wind.
SWATH ADJUSTMENT
When applications are made with a crosswind, the swath will be displaced downwind. Therefore, on the up and downwind edges of the field, the applicator should compensate for this
displacement by adjusting the path of the aircraft upwind. Swath adjustment distance should increase, with increasing drift potential (higher wind, smaller drops, etc.).
WIND
Drift potential is lowest between wind speeds of 2 - 10 mph. However, many factors, including droplet size and equipment type determine drift potential at any given speed. Application
should be avoided below 2 mph due to variable wind direction and high inversion potential. NOTE: Local terrain can influence wind patterns. Every applicator should be familiar with local
wind patterns and how they affect spray drift.
TEMPERATURE AND HUMIDITY
When making applications in low relative humidity, set up equipment to produce larger droplets to compensate for evaporation. Droplet evaporation is most severe when conditions are
both hot and dry.
TEMPERATURE INVERSIONS
Applications should not occur during a temperature inversion because drift potential is high. Temperature inversions restrict vertical air mixing, which causes small suspended droplets to
remain in a concentrated cloud. This cloud can move in unpredictable directions due to the light variable winds common during inversions. Temperature inversions are characterized by
increasing temperatures with altitude and are common on nights with limited cloud cover and light to no wind. They begin to form as the sun sets and often continue into the morning.
Their presence can be indicated by ground fog; however, if fog is not present, inversions can also be identified by the movement of smoke from a ground source or an aircraft smoke
generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates
indicates good vertical air mixing.
SENSITIVE AREAS
The pesticide should only be applied when the potential for drift to adjacent sensitive areas (e.g. residential areas, bodies of water, known habitat for threatened or endangered species,
non-target crops) is minimal (e.g. when wind is blowing away from the sensitive areas).

Clean copy DRAFT 6-8-21

7
RATE CONVERSION CHART FOR ALL OF THE FOLLOWING CROP USE DIRECTIONS
 POUNDS AI PER ACRE
 OUNCES ASSAIL 70 WP
 INSECTICIDE PER ACRE
[OR WHERE ON WSP: ASSAIL 70
WSP INSECTICIDE]
 POUNDS ASSAIL 70 WP
 INSECTICIDE PER ACRE
[OR WHERE ON WSP: ASSAIL 70
WSP INSECTICIDE]
 TREATED ACRES PER
POUND ASSAIL 70 WP
INSECTICIDE [OR WHERE ON
WSP: ASSAIL 70 WSP
INSECTICIDE]
 0.025 0.6 0.04 28
 0.038 0.9 0.05 18.4
 0.05 1.1 0.07 14
 0.075 1.7 0.11 9.3
 0.1 2.3 0.14 7
 0.125 2.9 0.18 5.6
 0.15 3.4 0.21 4.7
 0.2 4.6 0.29 3.5
 0.25 5.7 0.36 2.8
TROPICAL AND SUBTROPICAL MEDIUM TO LARGE FRUIT, SMOOTH, INEDIBLE PEEL (subgroup 24B)
Spray Volume for Tropical and subtropical medium to large fruit, smooth, inedible peel (subgroup 24B)
Apply in a minimum finished spray volume of at least 10 gallons per acre by air or 50 gallons per acre by ground.
SITE PEST
DOSAGE PER ACRE
USE DIRECTIONSPOUNDS
ACTIVE
OUNCES ASSAIL
70 WP INSECTICIDE
[OR WHERE ON WSP:
ASSAIL 70 WSP
INSECTICIDE]

Clean copy DRAFT 6-8-21

8
Tropical and
subtropical medium to
large fruit, smooth,
inedible peel (subgroup
24B):
abiu; akee apple;
avocado; avocado,
Guatemalan; avocado,
Mexican; avocado, West
Indian; bacury; banana;
banana, dwarf; binjai;
canistel; cupuacú;
etambe; jatobá; kei apple;
langsat; lanjut; lucuma;
mabolo; mango; mango,
horse; mango, Saipan;
mangosteen; paho;
papaya; pawpaw,
common; pelipisan;
pequi; pequia;
persimmon, American;
plantain; pomegranate;
poshte; quandong;
sapote, black; sapote,
green; sapote, white;
sataw; screw-pine; star
apple; tamarind-of-the-
Indies; wild loquat;
cultivars, varieties, and
hybrids of these
commodities.
Mealybug 0.15 3.4 Begin applications when treatment thresholds have been
reached.
Thorough coverage is important to obtain optimum control.
Complete sprays (every row) are recommended.
The use of spray adjuvants, such as horticultural oil or high
quality non-ionic surfactants, enhances coverage and may
improve pest control.
Consult your local Extension Service, Crop Advisor or
Nippon Soda Co., Ltd. representative for additional
information.
RESTRICTIONS: Tropical and subtropical medium to large fruit, smooth, inedible peel (within subgroup 24B)
• Do not make more than 2 applications per calendar year.
• Do not apply more than once every 14 days.
• Do not apply less than 1 day before harvest (PHI = 1 day).
• Do not exceed a total of 0.30 lb. active ingredient (6.8 oz. product) per acre per calendar year.
COTTON (within Crop Subgroup 20C)
SPRAY VOLUME FOR COTTON
Apply ASSAIL 70 WP Insecticide [OR where on WSP: Assail 70 WSP Insecticide] in a minimum finished spray volume of 5 gallons per acre by aircraft or by ground equipment (15
gallons per acre by ground for whitefly control). Under extreme pest populations or dense foliage, use a minimum spray volume of 10 gallons per acre by ground (15 gallons per
acre by ground for whitefly control). NOT for seed treatment use.
SITE PEST
DOSAGE PER ACRE
USE DIRECTIONSPOUNDS
ACTIVE
OUNCES ASSAIL
70 WP INSECTICIDE
[OR WHERE ON
WSP: ASSAIL 70
WSP INSECTICIDE]

Clean copy DRAFT 6-8-21

9
COTTON
(within Crop
Subgroup 20C);
cultivars,
varieties and/or
hybrids of these
[FOR USE IN
[Arizona]
California
Florida
Georgia
North Carolina
South Carolina
and Virginia
ONLY]*
*Items in
brackets [ ] are
optional label
language.
Aphids 0.025 – 0.05 0.6 – 1.1
Aphid species may differ in susceptibility to this product. If you
are unsure of the aphid species present and its susceptibility,
use the higher rates within the listed rate range.
Begin applications when treatment thresholds have been
reached.
Thorough coverage is important to obtain optimum control.
Whitefly
Sweet Potato
Silver Leaf
0.075 - 0.1 1.7 - 2.3 Begin applications when whitefly adults appear prior to
development of nymphs. Do not wait until heavy populations
have become established. For whitefly control, ASSAIL 70 WP
Insecticide [OR where on WSP: Assail 70 WSP Insecticide] should
be applied in a minimum finished spray
volume of 5 gallons per acre by aircraft and 15 gallons per acre
by ground equipment.
Use the high rates within the listed rate range under heavy
pressure.
Whiteflies have shown a tendency to develop resistance. For
resistance management purposes, alternating applications of
different chemical classes reduces the potential for resistance
development.
After cutout, foliar absorption of Assail may be affected,
reducing aphid and whitefly control. After cutout, it is
recommended to increase the use of penetrating adjuvants
(including oils) to enhance contact and absorption, and/or
consider tank mixes with knockdown insecticides such as
Bifenture™, Acephate, etc.
Plantbugs
(Lygus spp.)
0.05 – 0.1 1.1 – 2.3 Begin applications when treatment thresholds have been
reached.
Some species of plantbugs may be less susceptible and may
only be suppressed by applications of this product. Two
applications at 7 to 10 day intervals may be required to
achieve control.
Thorough coverage is important to obtain optimum control.
Fleahopper 0.025 - 0.05 0.6 - 1.1
Begin applications when treatment thresholds have been
reached.
Thorou
gh coverage is important to obtain optimum control.
Thrips 0.05 – 0.075 1.1 – 1.7 Begin applications when thrips damage is first observed or
anticipated.
Thorough coverage is important. Use of a spray surfactant may
improve coverage and control.
FOR USE AS AN
OVICIDE ON
COTTON
Budworm
Bollworm 0.025 - 0.05 0.6 - 1.1
Begin applications when treatment thresholds have been
reached. Thorough coverage is important to obtain optimum
control. Optimal ovicidal activity when applied within 24 hours
of e
gg lay.
Whitefly 0.075 - 0.1 1.7 - 2.3
Applications made for ovicidal control will not provide
sustained control of migrating adults.
RESTRICTIONS: Cotton (within Crop Subgroup 20C) – [For Use in CA, [AZ,] FL, GA, NC, SC, and VA Only]* (*Note to PM: items in
brackets [ ] are optional)
• For any of the pests listed above, use the high rate within the listed rate range under heavy pest pressure.
• Do not make more than 4 applications per calendar year.
• Do not apply more than once every 7 days.
• Do not apply less than 28 days before harvest (PHI = 28 days).
• Do not exceed a total of 0.4 lbs. active ingredient (9.2 oz. product) per acre per calendar year.
• There are no rotational crop plantback restrictions for this product.

Clean copy DRAFT 6-8-21

10
LEAFY GREENS (within Crop Group 4-16A)
SPRAY VOLUME FOR LEAFY GREENS (within Crop Group 4-16A): Apply in a minimum finished spray volume of 5 gallons per acre by air or 20 gallons per
acre by ground.
SITE PEST
DOSAGE PER ACRE
USE DIRECTIONSPOUNDS
ACTIVE
OUNCES ASSAIL
70 WP INSECTICIDE
[OR WHERE ON WSP:
ASSAIL 70 WSP
INSECTICIDE]
LEAFY GREENS (within
Crop Group 4-16A)
Amaranth (Chinese,
leafy),
Aster (Indian), Blackjack,
Cats whiskers, Cham-
chwi, Cham-na-mul,
Chervil (fresh leaves),
Chipilin,
Chrysanthemum (
garland), Cilantro (fresh
leaves), CornSalad,
Cosmos, Dandelion
(leaves), Dang-gwi
(leaves), Dillweed,
Dock, Dol-nam-mul,
Ebolo, Endive, Escarole,
Fameflower, Feather
cockscomb, , Good King
Henry, Huauzontle, Jute
leaves, Lettuce (bitter,
head, leaf), Orach,
Parsley fresh leaves),
Plantain (buckhorn),
Primrose (English),
Purslane (garden,
winter), Radicchio,
, Spinach (leaf, Malabar,
New Zealand, tanier),
Swiss Chard, Violet
(Chinese leaves), ;
cultivars, varieties, and
hybrids of these
commodities
Aphids 0.035 – 0.075 0.8 – 1.7 Aphid species may differ in susceptibility to this pr oduct. If
you are unsure of the aphid species present or if there are
difficult to control species such as lettuce aphid, red aphid,
foxglove aphid, etc., use the maximum rate within the listed
rate range.
Begin applications when treatment thresholds have been
reached.
Thorou
gh coverage is important to obtain optimum control.
Whitefly
Sweet Potato
Silver Leaf
Greenhouse
(For field
use only)
0.05 - 0.075 1.1 - 1.7

Begin applications when whitefly adults appear prior to
development of nymphs. Do not wait until heavy populations
have become established. Use of an adjuvant is
recommended to improve coverage and control. Use the
high rates within the listed rate range under heavy pressure.
Whiteflies have shown a tendency to develop resistance.
For resistance management purposes, alternating
applications of different chemical classes reduces the
potential for resistance development.
Diamondback
Moth
(suppression)
0.075 1.7 Begin applications as soon as oths begin laying eggs and
continue as needed.
Use in a program as resistance management tool.
Thrips 0.075 1.7

Begin applications as soon as thrips are seen in the crop
and continue applications as needed.
Thrips will seek sheltered parts of the plant so using nozzles
that produce a fine spray with sufficient water for thorough
coverage is essential for good control. Applications during
the “cupping” stage of cabbage may be especially helpful in
preventing injury. For resistance management purposes,
alternating applications of different chemical classes
reduces the potential for resistance development.
Swede Midge 0.075 1.7

Apply as a preventative spray to control the first generation
if swede midge has been found in your area. Preventative
applications will decrease the chance of quick population
increases later in the season
RESTRICTIONS: Leafy Greens (within Crop Group 4-16A)
• For any of the pests listed above, use the high rate within the listed rate range under heavy pest pressure.
• Do not make more than 5 applications per calendar year.
• Do not apply more than once every 7 days.
• Do not apply less than 7 days before harvest (PHI = 7 days).
• Do not exceed a total of 0.375 lbs. acetamiprid active ingredient (8.5 oz. of ASSAIL 70 WP [OR where on WSP: Assail 70 WSP Insec ticide] product) per
acre per calendar year including any pre-transplant applications of acetamiprid (maximum pre-transplant application rate of acetamiprid is 0.15 lb. ai/A).
• There are no rotational crop plantback restrictions for this product.

Clean copy DRAFT 6-8-21

11
BRASSICA LEAFY GREENS (within Crop Group 4-16B)
SPRAY VOLUME FOR BRASSICA LEAFY GREENS (within Crop Group 4-16B): Apply in a minimum finished spray volume of 5 gallons per acre by air or 20
gallons per acre by ground.
SITE PEST
DOSAGE PER ACRE
USE DIRECTIONSPOUNDS
ACTIVE
OUNCES ASSAIL
70 WP INSECTICIDE
[OR WHERE ON WSP:
ASSAIL 70 WSP
INSECTICIDE]
BRASSICA LEAFY
GREENS (within Crop
Group 4-16B)
Arugula, Broccoli
(Chinese), Broccoli raab,
Cabbage (abyssinian),
Cabbage (Chinese, bok
choy), Cabbage (seakale,
Collards, Cress (garden,
upland), Hanover salad,
Kale, Maca leaves,
Mizuna, Mustard greens,
Radish leaves, Rape
greens, Rocket (wild),
Shepherd’s purse, Turnip
greens, Watercress (Not
approved for use in
California); cultivars,
varieties, and hybrids of
these commodities
Aphids 0.035 – 0.1 0.8 – 2.3 Aphid species may differ in susceptibility to this pr oduct. If
you are unsure of the aphid species present or if there are
difficult to control species such as lettuce aphid, red aphid,
foxglove aphid, etc., use the maximum rate within the listed
rate range.
Begin applications when treatment thresholds have been
reached.
Thorou
gh coverage is important to obtain optimum control.
Whitefly
Sweet Potato
Silver Leaf
Greenhouse
(For field
use only)
0.05 - 0.1 1.1 – 2.3

Begin applications when whitefly adults appear prior to
development of nymphs. Do not wait until heavy populations
have become established. Use of an adjuvant is
recommended to improve coverage and control. Use the
high rates within the listed rate range under heavy pressure.
Whiteflies have shown a tendency to develop resistance.
For resistance management purposes, alternating
applications of different chemical classes reduces the
potential for resistance development.
Diamondback
Moth
(suppression)
Flea beetle
0.075 – 0.1 1.7 – 2.3

Begin applications as soon as moths begin laying eggs and
continue as needed.
Use in a program as a resistance management tool.
Thrips 0.075 – 0.1 1.7 – 2.3

Begin applications as soon as thrips are seen in the crop
and continue applications as needed.
Thrips will seek sheltered parts of the plant so using nozzles
that produce a fine spray with sufficient water for thorough
coverage is essential for good control. Applications during
the “cupping” stage of cabbage may be especially helpful in
preventing injury. For resistance management purposes,
alternating applications of different chemical classes
reduces the potential for resistance development.

Harlequin Bug 0.075 - 0.1 1.7 – 2.3

Begin applications when treatment thresholds have been
reached. Thorough coverage is important to obtain
optimum control.
Swede Midge 0.075 – 0.1 1.7 - 2.3

Apply as a preventative spray to control the first generation
if swede midge has been found in your area. Preventative
applications will decrease the chance of quick population
increases later in the season.
RESTRICTIONS: Leafy Vegetables (within Crop Group 4-16)
x For any of the pests listed above, use the high rate within the listed rate range under heavy pest pressure.

Clean copy DRAFT 6-8-21

12
x Do not make more than 4 applications per calendar year.
x Do not apply more than once every 7 days.
x Do not apply less than 3 days before harvest (PHI = 3 days).
x Do not exceed a total of 0.375 lbs. acetamiprid active ingredient (8.5 oz. of ASSAIL 70 WP [OR where on WSP: Assail 70 WSP Insecticide] product)
per acre per calendar year including any pre-transplant applications of acetamiprid (maximum pre-transplant application rate of acetamiprid is 0.15
lb. ai/A).
x There are no rotational crop plantback restrictions for this product.
x Do not harvest turnip root for food/feed purposes
x For applications made to watercress, production fields must be drained of water at least 24 hours prior to application and water must not be
reapplied to the field for a minimum of 24 hours following the application.
LEAF PETIOLE VEGETABLES (within crop subgroup 22B)
SPRAY VOLUME FOR LEAF PETIOLE VEGETABLES (within crop subgroup 22B): Apply in a minimum finished spray volume of 5 gallons per acre by air or
20 gallons per acre by ground.
SITE PEST
DOSAGE PER ACRE
USE DIRECTIONSPOUNDS
ACTIVE
OUNCES ASSAIL
70 WP INSECTICIDE
[OR WHERE ON WSP:
ASSAIL 70 WSP
INSECTICIDE]
LEAF PETIOLE
VEGETABLES
within crop subgroup
22B
Cardoon, celery, Chinese
celery, fuki, rhubarb, udo,
zuiki; cultivars, varieties
and hybrids of these
commodities
Aphids 0.038 – 0.075 0.9 – 1.7 Aphid species may differ in susceptibility to this pr oduct. If
you are unsure of the aphid species present or if there are
difficult to control species such as lettuce aphid, red aphid,
foxglove aphid, etc., use the maximum rate within the listed
rate range.
Begin applications when treatment thresholds have been
reached.
Thorou
gh coverage is important to obtain optimum control.
Whitefly
Sweet Potato
Silver Leaf
Greenhouse
(For Field
Use Only)
0.05 - 0.075 1,1 – 1.7

Begin applications when whitefly adults appear prior to
development of nymphs. Do not wait until heavy populations
have become established. Use of an adjuvant is
recommended to improve coverage and control. Use the
high rates within the listed rate range under heavy pressure.
Whiteflies have shown a tendency to develop resistance.
For resistance management purposes, alternating
applications of different chemical classes reduces the
potential for resistance development.
RESTRICTIONS: Leaf Petiole Vegetables (within crop subgroup 22B)
• For any of the pests listed above, use the high rate within the listed rate range under heavy pest pressure.
• Do not make more than 5 applications per calendar year.
• Do not apply more than once every 7 days.
• Do not apply less than 7 days before harvest (PHI = 7 days).
• Do not exceed a total of 0.375 lbs. acetamiprid active ingredient (8.5 ozs of ASSAIL 70 WP [OR where on WSP: Assail 70 WSP Insect icide] product) per
acre per calendar year including any pre-transplant applications of acetamiprid (maximum pre-transplant application rate of acetamiprid is 0.15 lb ai/A)
• There are no rotational crop plantback restrictions for this product.
BRASSICA HEAD and STEM VEGETABLES (within Crop Group 5-16)
SPRAY VOLUME FOR BRASSICA HEAD and STEM VEGETABLES (within Crop Group 5-16): Apply in a minimum finished
spray volume of 5 gallons per acre by air or 20 gallons per acre by ground.
SITE PEST DOSAGE PER ACRE USE DIRECTIONS

Clean copy DRAFT 6-8-21

13
POUNDS
ACTIVE
OUNCES ASSAIL
70 WP INSECTICIDE
[OR WHERE ON WSP:
ASSAIL 70 WSP
INSECTICIDE]
BRASSICA HEAD and
STEM VEGETABLES
(within Crop Subgroup
5-16)
Broccoli, Brussels
sprouts,
Cabbage, Chinese
cabbage (napa),
Cauliflower,and cultivars,
varieties and hybrids of
these commodities
Aphids 0.035 – 0.075 0.8 – 1.7 Aphid species may differ in susceptibility to this pr oduct.
If you are unsure of the aphid species present and its
susceptibility, use the higher rates within the listed rate
range.
Begin applications when treatment thresholds have been
reached.
Thorough coverage is important to obtain optimum control.
Whitefly
Sweet Potato
Silver Leaf
Greenhouse

(For field
use only)
0.05 - 0.075 1.1 - 1.7

Begin applications when whitefly adults appear prior to
development of nymphs. Do not wait until heavy populations
have become established. Use of an adjuvant is
recommended to improve coverage and control. Use the
high rates within the listed rate range under heavy pressure.
Whiteflies have shown a tendency to develop resistance.
For resistance management purposes, alternating
applications of different chemical classes reduces the
potential for resistance development.
Diamondback
Moth
(suppression)
0.075 1.7 Begin applications as soon as moths begin laying eggs and
continue as needed.
Use in a program as a resistance management tool.
Thrips 0.075 1.7 Begin applications as soon as thrips are seen in the crop
and continue applications as needed.
Thrips will seek sheltered parts of the plant so using nozzles
that produce a fine spray with sufficient water for thorough
coverage is essential for good control. Applications during
the “cupping” stage of cabbage may be especially helpful in
preventing injury. For resistance management purposes,
alternating applications of different chemical classes
reduces the potential for resistance development.
Swede Midge 0.075 1.7 Apply as a preventative spray to control the first generation
if swede midge has been found in your area. Preventative
applications will decrease the chance of quick population
increases later in the season.
RESTRICTIONS: Brassica Head and Stem Vegetables (within Crop Group 5-16)
• For any of the pests listed above, use the high rate within the listed rate range under heavy pest pressure.
• Do not make more than 5 applications per calendar year.
• Do not apply more than once every 7 days.
• Do not apply less than 7 days before harvest (PHI = 7 days).
• Do not exceed a total of 0.375 lbs. acetamiprid active ingredient (8.5 ozs of ASSAIL 70 WP [OR where on WSP: Assail 70 WSP Insec ticide] product) per
acre per calendar year including any pre-transplant applications of acetamiprid (maximum pre-transplant application rate of acetamiprid is 0.15 lb ai/A).
• There are no rotational crop plantback restrictions for this product.

Clean copy DRAFT 6-8-21

14
KOHLRABI
SPRAY VOLUME FOR KOHLRABI: Apply in a minimum finished spray volume of 5 gallons per acre by air or 20 gallons per acre
by ground.
SITE PEST
DOSAGE PER ACRE
USE DIRECTIONSPOUNDS
ACTIVE
OUNCES ASSAIL
70 WP INSECTICIDE
[OR WHERE ON WSP:
ASSAIL 70 WSP
INSECTICIDE]
KOHLRABI Aphids 0.035 – 0.075 0.8 – 1.7 Aphid species may differ in susceptibility to this pr oduct.
If you are unsure of the aphid species present and its
susceptibility, use the higher rates within the listed rate
range.
Begin applications when treatment thresholds have been
reached.
Thorough coverage is important to obtain optimum control.
Whitefly
Sweet Potato
Silver Leaf
Greenhouse
 (For field
use only)
0.05 - 0.075 1.1 - 1.7

Begin applications when whitefly adults appear prior to
development of nymphs. Do not wait until heavy populations
have become established. Use of an adjuvant is
recommended to improve coverage and control. Use the
high rates within the listed rate range under heavy pressure.
Whiteflies have shown a tendency to develop resistance.
For resistance management purposes, alternating
applications of different chemical classes reduces the
potential for resistance development.
Diamondback
Moth
(suppression)
0.075 1.7 Begin applications as soon as moths begin laying eggs and
continue as needed.
Use in a program as a resistance management tool.
Thrips 0.075 1.7 Begin applications as soon as thrips are seen in the crop
and continue applications as needed.
Thrips will seek sheltered parts of the plant so using nozzles
that produce a fine spray with sufficient water for thorough
coverage is essential for good control. Applications during
the “cupping” stage of cabbage may be especially helpful in
preventing injury. For resistance management purposes,
alternating applications of different chemical classes
reduces the potential for resistance development.
Swede Midge 0.075 1.7 Apply as a preventative spray to control the first generation
if swede midge has been found in your area. Preventative
applications will decrease the chance of quick population
increases later in the season.
RESTRICTIONS: Kohlrabi
• For any of the pests listed above, use the high rate within the listed rate range under heavy pest pressure.
• Do not make more than 5 applications per calendar year.
• Do not apply more than once every 7 days.
• Do not apply less than 7 days before harvest (PHI = 7 days).
• Do not exceed a total of 0.375 lbs. acetamiprid active ingredient (8.5 ozs of ASSAIL 70 WP [OR where on WSP: Assail 70 WSP Inse cticide] product) per
acre per calendar year including any pre-transplant applications of acetamiprid (maximum pre-transplant application rate of acetamiprid is 0.15 lb ai/A).
• There are no rotational crop plantback restrictions for this product.

Clean copy DRAFT 6-8-21

15
CELTUCE, FLORENCE FENNEL
SPRAY VOLUME FOR CELTUCE AND FLORENCE FENNEL: Apply in a minimum finished spray volume of 5 gallons per acre by air or 20 gallons per acre by
ground.
SITE PEST
DOSAGE PER ACRE
USE DIRECTIONSPOUNDS
ACTIVE
OUNCES ASSAIL
70 WP INSECTICIDE
[OR WHERE ON WSP:
ASSAIL 70 WSP
INSECTICIDE]
Celtuce, Florence
Fennel
Aphids 0.035 – 0.075 0.8 – 1.7 Aphid species may differ in susceptibility to this pr oduct. If
you are unsure of the aphid species present or if there are
difficult to control species such as lettuce aphid, red aphid,
foxglove aphid, etc., use the maximum rate within the listed
rate range.
Begin applications when treatment thresholds have been
reached.
Thorou
gh coverage is important to obtain optimum control.
Whitefly
Sweet Potato
Silver Leaf
Greenhouse
(For field
use only)
0.05 - 0.075 1.1 - 1.7

Begin applications when whitefly adults appear prior to
development of nymphs. Do not wait until heavy populations
have become established. Use of an adjuvant is
recommended to improve coverage and control. Use the
high rates within the listed rate range under heavy pressure.
Whiteflies have shown a tendency to develop resistance.
For resistance management purposes, alternating
applications of different chemical classes reduces the
potential for resistance development.
RESTRICTIONS: Celtuce, Florence fennel
• For any of the pests listed above, use the high rate within the listed rate range under heavy pest pressure.
• Do not make more than 5 applications per calendar year.
• Do not apply more than once every 7 days.
• Do not apply less than 7 days before harvest (PHI = 7 days).
• Do not exceed a total of 0.375 lbs. acetamiprid active ingredient (8.5 oz. of ASSAIL 70 WP [OR where on WSP: Assail 70 WSP Insec ticide] product) per
acre per calendar year including any pre-transplant applications of acetamiprid (maximum pre-transplant application rate of acetamiprid is 0.15 lb. ai/A).
• There are no rotational crop plantback restrictions for this product.
FRUITING VEGETABLES (within Crop Group 8-10)
SPRAY VOLUME FOR FRUITING VEGETABLES (within Crop Group 8-10): Apply in a minimum finished spray volume of 5 gallons per acre by air or 20
gallons per acre by ground.
SITE PEST
DOSAGE PER ACRE
USE DIRECTIONSPOUNDS
ACTIVE
OUNCES ASSAIL
70 WP
INSECTICIDE [OR
WHERE ON WSP:
ASSAIL 70 WSP
INSECTICIDE]
FRUITING VEGETABLES
(within Crop Group 8-10)
Aphids 0.035 – 0.075 0.8 – 1.7 Aphid species may differ in susceptibility to this pr oduct.
If you are unsure of the aphid species present or if there are

Clean copy DRAFT 6-8-21

16
Eggplant (including african,
pea, scarlet), Cocona,
Garden huckleberry, Goji
berry, Groundcherry,
Martynia, Naranjilla, Okra,
Pepino, Pepper (bell,
nonbell), Roselle,
Sunberry, Tomato
(including bush, currant,
tree), Tomatillo & Cultivars,
varieties and/or hybrids of
these
Colorado Potato
Beetle
0.025 - 0.05 0.6 - 1.1
difficult to control species present, use the maximum rate
within the listed rate range.
Begin applications when treatment thresholds have been
reached.
Thorou
gh coverage is important to obtain optimum control.
Whitefly
Sweet Potato
Silver Leaf
Greenhouse

(For Field
Use Only)
0.05 - 0.075 1.1 - 1.7

Begin applications when whitefly adults appear prior to
development of nymphs. Do not wait until heavy populations
have become established. Use of an adjuvant is
recommended to improve coverage and control. Use the
high rates within the listed rate range under heavy pressure.
Whiteflies have shown a tendency to develop resistance.
For resistance management purposes, alternating
applications of different chemical classes reduces the
potential for resistance development.
Pepper Weevil 0.05 - 0.075 1.1 - 1.7 Begin applications when pepper weevil adults first appear
and flower buds and/or fruit are present.
Apply on a 7 to 14-day interval. Use a 7-day interval under
heav
y insect pressure.
Thrips 0.075 1.7 Begin applications as soon as thrips are seen in the crop
and continue applications as needed. Thorough coverage
of the plant is important to obtain optimum control. For
resistance management purposes, alternating applications
of different chemical classes reduces the potential for
resistance development.
Leafhopper 0.05 – 0.075 1.1 – 1.7 Begin applications when treatment thresholds have been
reached. Thorough coverage is important to obtain
optimum control.
RESTRICTIONS: Fruiting Vegetables (within Crop Group 8-10)
• For any of the pests listed above, use the high rate within the listed rate range under heavy pest pressure.
• Do not make more than 4 applications per calendar year.
• Do not apply more than once every 7 days.
• Do not apply less than 7 days before harvest (PHI = 7 days).
• Do not exceed a total of 0.3 lbs. acetamiprid active ingredient (6.8 ozs of ASSAIL 70 WP [OR where on WSP: Assail 70 WSP Insectic ide] product) per acre
per calendar year including any pre-transplant applications of acetamiprid (maximum pre-transplant application rate of acetamiprid is 0.15 lb ai/A).
• There are no rotational crop plantback restrictions for this product.
CITRUS (within Crop Group 10-10)
SPRAY VOLUME FOR CITRUS (within Crop Group 10-10) For mature trees, apply in a minimum finished spray volume of 100 gallons per acre by ground or
a minimum of 20 gallons per acre by air. Ground applications are recommended for optimal control.
SITE PEST
DOSAGE PER ACRE
USE DIRECTIONSPOUNDS
ACTIVE
OUNCES ASSAIL
70 WP INSECTICIDE
[OR WHERE ON
WSP: ASSAIL 70
WSP INSECTICIDE]
CITRUS (within Crop
Group 10-10)
Calamondin, Citron,
Citrus Hybrids,
Grapefruit, Japanese
summer grapefruit,
Aphids 0.05 – 0.1 1.1 – 2.3 Aphid species may differ in susceptibility to this pr oduct.
If you are unsure of the aphid species present and its
susceptibility, use the higher rates within the listed rate
range.

Clean copy DRAFT 6-8-21

17
Kumquat, Lemon, Lime
(including Australian
desert, Australian finger,
Australian round, Brown
River finger, Mount
White, Russell River,
sweet, Tahiti, New
Guinea Wild), Mandarin
(Mediterranean,
Satsuma), Orange
(sweet, sour, tachibana,
trifoliate) Pummelo,
Tangelo, Tangor, Uniq
fruit & Cultivars, varieties
and/or hybrids of these
Citrus Thrips
Citrus Leafminer
Citrus Mealybug
Caribbean Black
Scale
Glassywinged
sharpshooter
0.075 - 0.125 1.7 – 2.9 Use higher rates within the listed rate range under heavy
insect pressure.
Begin applications when treatment thresholds have been
reached.
Thorough coverage is important to obtain optimum
control.
Citricola Scale
Red Scale
0.15 - 0.25 3.4 - 5.7

Begin applications when treatment thresholds have
been reached. Treat for citricola scale when crawlers are
present in the spring and fall. Use of approved
horticultural oil will enhance control.
Adjust gallonage to tree size to insure coverage of scale
on wood and foliage. Optimum gallonage for Red Scale
control is 750 - 1500 GPA.
Katydid 0.11 – 0.19 2.5 – 4.3

Apply at petal fall or when katydids are first observed.
Repeat in 2 to 3 weeks.
Thorough coverage is important to obtain optimum
control.
Asian Citrus Psyllid
(suppression)
0.13 – 0.25 3.0 – 5.7

Begin applications as pest populations begin to appear.
Thorough coverage is necessary for optimum control.
The addition of a spray adjuvant such as silicone-based
surfactants or horticultural oil may enhance coverage and
improve pest control. Scout groves regularly and retreat
if needed. Use higher rates under heavy insect pressure.
RESTRICTIONS: Citrus (within Crop Group 10-10)
• For any of the pests listed above, use the high rate within the listed rate range under heavy pest pressure.
• Do not make more than 5 applications per calendar year.
• Do not apply more than once every 7 days.
• Do not apply less than 7 days before harvest (PHI = 7 days).
• Do not exceed a total of 0.55 lbs. active ingredient (12.5 ozs product) per acre per calendar year.
POME FRUIT (within Crop Group 11-10)
SPRAY VOLUME FOR POME FRUIT (within Crop Group 11-10): Apply in a minimum finished spray volume of at least 50 gallons per acre by ground or a
minimum of 10 gallons per acre by air. Ground applications are recommended for optimal control.
SITE PEST
DOSAGE PER ACRE
PEST-SPECIFIC
DIRECTIONS USE DIRECTIONSPOUNDS
ACTIVE
OUNCES ASSAIL
70 WP INSECTICIDE
[OR WHERE ON WSP:
ASSAIL 70 WSP
INSECTICIDE]

Clean copy DRAFT 6-8-21

18
POME FRUIT
(within Crop Group
11-10)
Apple, Azarole,
Crabapple, Loquat,
Mayhaw, Hook,
Medlar, Pear
(including Asian),
Quince (including
Chinese, Japanese),
Tejocote & Cultivars,
varieties and/or
hybrids of these
Aphids 0.05 – 0.075 1.1 – 1.7
Aphid species may differ
in susceptibility to this
product. If you are unsure
of the aphid species
present and its
susceptibility, use the
higher rates within the
listed rate range. Woolly
apple aphid may require
use of higher rates within
the listed rate range and
repeat applications.
Begin applications before
insect populations reach
damaging levels.
Degree day models are
good indicators that can
be used to determine
application timing and
interval for leafminer,
codling moth, and certain
other insect pests.
Thorough spray coverage
is important to obtain
optimum and extended
control.
Residual control of labeled
pests varies by rate. Use
the higher rates for optimal
and extended control.
The use of spray
adjuvants, such as high
quality non-ionic
surfactants, enhances
coverage and may
improve pest control.
Complete sprays (every
row) are recommended.
Use of a horticultural oil
with ASSAIL 70 WP
Insecticide [OR where on
WSP: Assail 70 WSP
Insecticide] may aid in
managing mites,
particularly when
conditions for mite buildup
are favorable. Also,
consider the mite
population history and the
use of other products in
the orchard that may
predispose a mite
population increase.
Tentiform
Leafminer
0.05 1.1
Application(s) for leafminer
control must be made
before larvae reach the
tissue feeding stage.
Leafhoppers 0.05 - 0.075 1.1 - 1.7
Codling Moth 0.075 - 0.15 1.7 - 3.4
The use of horticultural oil
in combination with
ASSAIL 70 WP Insecticide
[OR where on WSP: Assail
70 WSP Insecticide] has
been shown to enhance
control of codling moth.
Oriental Fruit Moth
Lesser Apple Worm
0.1 – 0.15 2.3 – 3.4
Mealybug
Psylla
Mullein Plant Bug
(Campylomma)
0.075 – 0.15 1.7 – 3.4
Summer applications may
not effectively control
Psylla.
Application to prevent fruit
damage from Mullein Plant
Bug should be made at
pink bud through bloom,
prior to petal fall. Do not
apply this product when
bees are foraging in the
area to be treated.
European Apple
Sawfly
Japanese Beetle
0.1 – 0.15 2.3 – 3.4
For Japanese Beetle:
adult beetles will stop
feeding after application
and mortality will occur
within a few days.

Clean copy DRAFT 6-8-21

19
Apple Maggot
Plum Curculio
San Jose Scale
(suppression)
0.15 3.4
For Apple Maggot, use of
baited spheres is a good
indicator that can be used
to determine spray timing.
For optimum control of
Plum Curculio, an early
petal fall application is
necessary followed by one
or two cover sprays during
the egg-laying period.
For best results against
San Jose Scale time
applications for the crawler
stage.
The addition of a
horticultural oil is
recommended for
improved performance
against San Jose Scale
Consult your local
Extension Service, Crop
Advisor or
Nippon Soda Co., Ltd.
representative for
additional information.
Dogwood Borer 0.15 3.4 Apply spray to tree trunks.
Time first application, after
moth emergence, to
coincide with egg laying
period. Make second
application 14 to 21 days
later.
RESTRICTIONS: Pome Fruit (within Crop Group 11-10)
• For any of the pests listed above, use the high rate within the listed rate range under heavy pest pressure.
• Do not make more than 4 applications per calendar year.
• Do not apply more than once every 12 days.
• Do not apply less than 7 days before harvest (PHI = 7 days).
• Do not exceed a total of 0.60 lbs. active ingredient (13.5 ozs product) per acre per calendar year.
GRAPES and other Climbing Vine Small Fruits (except Fuzzy Kiwifruit) (within Crop Sub-Group 13-07F)
SPRAY VOLUME FOR GRAPES and OTHER CLIMBING VINE SMALL FRUITS (EXCEPT FUZZY KIWIFRUIT) (within Crop Sub-Group 13-07F): Apply in a
minimum finished spray volume of 5 gallons per acre by air or 20 gallons per acre by ground. Ground applications are recommended for optimal control.
SITE PEST
DOSAGE PER ACRE
USE DIRECTIONSPOUNDS
ACTIVE
OUNCES ASSAIL
70 WP INSECTICIDE
[OR WHERE ON WSP:
ASSAIL 70 WSP
INSECTICIDE]

Clean copy DRAFT 6-8-21

20
GRAPES and other
climbing vine small
fruits (except fuzzy
kiwifruit) (within
Crop Sub-Group 13-
07F)
Amur river grape;
gooseberry, hardy
kiwifruit, Maypop,
schisandra berry, and
cultivars, varieties,
and/or hybrids of
these.
Leafhoppers
Including grape
leafhopper and
variegated
leafhopper
Grape cane girdler
Grape berry moth
Glassywinged
sharpshooter
Aphids
Mealybug
(Grape, Obscure,
Vine) Western
Grapeleaf
Skeletonizer
Thrips
Phylloxera*
(aerial form only)
Banded Grape
Bug*
Rose Chafer*
Japanese Beetle*
0.05 – 0.10 1.1- 2.3 Begin applications when treatment thresholds have been
reached.
Thorough coverage is important to obtain optimum control.
For Mealybug control, apply ASSAIL 70 WP [OR where on
WSP: Assail 70 WSP Insecticide] as crawlers/nymphs
become active.
For Western grapeleaf skeletonizer, apply ASSAIL 70 WP
Insecticide [OR where on WSP: Assail 70 WSP
Insecticide
] as larvae are observed feeding on leaves.
Apply sufficient water to provide thorough coverage of all
surfaces.
For Japanese Beetle: Adult beetles will stop feeding after
application and mortality will occur within a few days.
The use of spray adjuvants, such as high quality non-ionic
surfactants, methylated seed or horticultural oils, may
enhance coverage and plant uptake and may improve
pest control. The use of stickers is not recommended.
Some adjuvants can cause adverse effects, such as
spotting or burn to fruit or foliage. Select an adjuvant that
will be safe for the target crop. Follow adjuvant use
directions. Consult your local Extension Service, Crop
Advisor or Nippon Soda representative for additional
information.
*Not for use on these pests in CA, OR, and WA.
RESTRICTIONS: Grapes and other climbing vine small fruits (except fuzzy kiwifruit) (within Crop Sub-Group 13-07F)
• Do not make more than 2 applications per calendar year.
• Do not apply more than once every 14 days.
• Do not apply less than 3 days before harvest (PHI = 3 days).
• Do not exceed a total of 0.2 lb. active ingredient (4.6 ozs product) per acre per calendar year
TUBEROUS AND CORM VEGETABLES (within Crop Sub-Group 1C)
SPRAY VOLUME FOR TUBEROUS AND CORM VEGETABLES (within Crop Sub-Group 1C): Apply in a minimum finished spray volume of 5 gallons per
acre by air or 20 gallons per acre by ground.
SITE PEST
DOSAGE PER ACRE
USE DIRECTIONSPOUNDS
ACTIVE
OUNCES ASSAIL
70 WP INSECTICIDE
[OR WHERE ON WSP:
ASSAIL 70 WSP
INSECTICIDE]
TUBEROUS AND
CORM
VEGETABLES
(within Crop Sub-
Group 1C)
Potato, Sweet
Potato, Arracacha,
Arrowroot, Artichoke
(Chinese and
Jerusalem), Edible
Aphids* 0.044 – 0.075 1.0 – 1.7
Aphid species may differ in susceptibility to this product. If
you are unsure of the aphid species present and its
susceptibility, use the higher rate within the listed rate
range.
Use higher rates within the listed rate range under
conditions of heavy pest pressure or dense foliage.
Begin applications when pest treatment thresholds have
been reached.
Leafhoppers*
Colorado Potato
Beetle*
Cucumber Beetle
0.025 - 0.075 0.6 - 1.7

Clean copy DRAFT 6-8-21

21
Canna, Cassava
(Bitter and Sweet),
Chayote (Root),
Chufa, Dasheen,
Ginger, Leren,
Tanier, Turmeric,
Yam Bean, True Yam
Flea Beetle 0.025 – 0.05 0.6 – 1.1
Thorough coverage is important to obtain optimum control.
*For application via overhead sprinkler chemigation to
emerged potato foliage, use a 1.7 ounce / Acre rate to
control aphids and leafhoppers and a 1.0 – 1.7 ounce /
Acre rate to control Colorado potato beetles. See the
Directions for Chemigation section of the label for
application details.
FOR USE AS AN
OVICIDE
European Corn
Borer
0.05 – 0.075 1.1 – 1.7
RESTRICTIONS: Tuberous and Corm Vegetables (within Crop Sub-Group 1C)
• Do not make a foliar ASSAIL 70WP Insecticide [OR where on WSP: Assail 70 WSP Insecticide] application following a seed treatment application of
acetamiprid in the same crop.
• For any of the pests listed above, use the high rate within the listed rate range under heavy pest pressure.
• Do not make more than 4 applications per calendar year.
• Do not apply more than once every 7 days.
• Do not apply less than 7 days before harvest (PHI = 7 days).
• Do not exceed a total of 0.3 lb. active ingredient (7 ozs product) per acre per calendar year.
• There are no rotational crop plantback restrictions for this product.
TOBACCO
SPRAY VOLUME FOR TOBACCO: Apply in a minimum finished spray volume of 5 gallons per acre by air or 20 gallons per acre by ground.
SITE PEST
DOSAGE PER ACRE
USE DIRECTIONSPOUNDS
ACTIVE
OUNCES ASSAIL
70 WP INSECTICIDE
[OR WHERE ON WSP:
ASSAIL 70 WSP
INSECTICIDE]
TOBACCO
Flea beetles
Hornworms
0.05 – 0.075 1.1 – 1.7 Aphid species may differ in susceptibility to this pr oduct. If
you are unsure of the aphid species present and its
susceptibility, use the higher rates within the listed rate
range.
Begin applications when treatment thresholds have been
reached.
Use the higher rates within the listed rate range under
conditions of heavy pest pressure.
Thorough coverage is important to obtain optimum control.
Aphids 0.025 – 0.075 0.6 – 1.7
FOR USE AS AN
OVICIDE
Budworm
0.05 – 0.075 1.1 – 1.7
RESTRICTIONS: Tobacco
• Do not make more than 4 applications per calendar year.
• Do not apply more than once every 7 days.
• Do not apply less than 7 days before harvest (PHI = 7 days).
• Do not exceed a total of 0.3 lb. active ingredient (6.8 ozs product) per acre per calendar year.

Clean copy DRAFT 6-8-21

22
STONE FRUIT (within Crop Group 12-12)
SPRAY VOLUME FOR STONE FRUIT (within Crop Group 12-12): Apply in a minimum finished spray volume of at least 10 gallons per acre by air or 50
gallons per acre by ground.
SITE PEST
DOSAGE PER ACRE
PEST-SPECIFIC
DIRECTIONS GENERAL USE DIRECTIONSPOUNDS
ACTIVE
OUNCES
ASSAIL
70 WP
INSECTICIDE
[OR WHERE ON
WSP: ASSAIL
70 WSP
INSECTICIDE]
STONE FRUIT
(within Crop
Group 12-12)
Apricot, Apricot
(Japanese),
Capulin, Cherry
(black, Nanking,
sweet, tart),
Jujube (Chinese)
Nectarine, Peach,
Plum (American,
beach, Canadian,
cherry,
Chickasaw,
Damson,
Japanese,
Klamath, prune),
Plumcot, Prune
(fresh and dried),
Sloe; and
cultivars, varieties
and/or hybrids of
these
Aphids
Leafhoppers
0.05 – 0.10 1.1 – 2.3 Aphid species may differ in
susceptibility to this product.
If you are unsure of the aphid
species present and its
susceptibility, use the higher
rates within the listed rate
ran
ge.
Begin applications when treatment
thresholds have been reached.
Thorough coverage is important to obtain
optimum control.
Complete sprays (every row) are
recommended.
Residual control of labeled pests varies by
rate. Use higher rates within the listed rate
range for optimal and extended control.
The use of spray adjuvants, such as
silicone-based surfactants or horticultural
oils, may also enhance coverage and
improve pest control.
Use of pheromone traps in conjunction with
degree days are good indicators that can be
used to determine spray timings.
Consult your local Extension Service, Crop
Advisor or Nippon Soda Co., Ltd.
representative for additional information.
Glassywinged
sharpshooter
0.075 - 0.15 1.7 – 3.4
Oriental Fruit
Moth
Peach Twig
Borer
Plum Curculio
Cat-facing
insects (such
as tarnished
plant bug and
stinkbug)
(suppression)
0.10 – 0.15 2.3 – 3.4 For control of Oriental Fruit
Moth and Peach Twig Borer,
make a delayed dormant
application with oil prior to
bud break, and at moth flights
using appropriate degree day
models.
For optimum control of Plum
Curculio, an early petal fall
application is necessary
followed by one or two cover
sprays during the egg-laying
period. Follow local
recommendations for
subsequent generations.
The addition of horticultural
oil is recommended for
improved performance.
Cherry Fruit
Fly
Black Cherry
Fruit Fly
Western
Cherry Fruit
Fly
0.10 - 0.15 2.3 - 3.4 Begin applications for cherry
fruit fly, black cherry fruit fly
and western cherry fruit fly at
adult emergence and
continue on a 10-day spray
interval through egg hatch.
Proper application timing is
critical for optimum control of
fruit flies.

Clean copy DRAFT 6-8-21

23
San Jose
Scale
Japanese
Beetle
Rose Chafer
0.1 – 0.15 2.3 – 3.4 For San Jose Scale, apply
with horticultural oil as a
dormant/delayed dormant
application and time in-
season applications for the
crawler stage.
The addition of horticultural
oil for crawler stage
applications may improve
performance against San
Jose Scale. Consult local
recommendations regarding
the use of oil.
For Japanese Beetle: adult
beetles will stop feeding after
application and mortality will
occur within a few da
ys.
RESTRICTIONS: Stone Fruit (within Crop Group 12-12)
• For any of the pests listed above, use the high rate within the listed rate range under heavy pest pressure.
• Do not make more than 4 applications per calendar year.
• Do not apply more than once every 10 days.
• Do not apply less than 7 days before harvest (PHI = 7 days).
• Do not exceed a total of 0.6 lb. active ingredient (13.6 ozs product) per acre per calendar year.
CUCURBITS (within Crop Group 9)
SPRAY VOLUME FOR CUCURBITS (within Crop Group 9): Apply in a minimum finished spray volume of 5 gallons per acre by air or 20 gallons per acre by
ground.
SITE PEST
DOSAGE PER ACRE
USE DIRECTIONSPOUNDS
ACTIVE
OUNCES ASSAIL
70 WP INSECTICIDE
[OR WHERE ON WSP:
ASSAIL 70 WSP
INSECTICIDE]
CUCURBITS (within
Crop Group 9)
Chayote (fruit),
Chinese waxgourd
(Chinese preserving
melon), Citron melon,
Cucumber, Gherkin,
Gourd (edible),
Mormordica spp.,
Muskmelon (hybrid
and/or cultivars of
Cucumis melo
including true
cantaloupe,
cantaloupe, casaba,
crenshaw melon,
golden pershaw
melon, honeydew
melon, honey balls,
Cucumber Beetle
Spotted
Striped
Western Striped
Melonworm
Pickleworm
0.05 – 0.10 1.1 – 2.3 For Cucumber Beetles: adult beetles will stop feeding
after application and mortality will occur within a few days.
For Melonworm: Begin applications at first sign of foliar
feeding and/or when larvae are present in the field.
For Pickleworm: Begin applications at first bloom and
continue as needed.
The use of spray adjuvants, such as silicone-based
surfactants or crop oils, may enhance coverage and
improve pest control.
Squash Bug
Squash Vine Borer
0.10 2.3 Applications for Squash Bug are most effective against
newly laid eggs and nymphs.
Aphids
Leafhoppers
0.05 - 0.075 1.1 – 1.7 Aphid and Leafhopper species may differ in susceptibility
to this product. If you are unsure of the aphid species
present and its susceptibility, use the higher rates within
the listed rate ran
ge.

Clean copy DRAFT 6-8-21

24
mango melon,
Persian melon,
pineapple melon,
Santa Claus melon,
and snake melon),
Pumpkin, Squash
(summer and winter),
Watermelon
Whitefly
Sweet Potato
Silver Leaf
0.05 – 0.10 1.1 – 2.3 Begin applications when whitefly adults appear, prior to
development of nymphs. Do not wait until heavy
populations have become established. Use the high
rates within the listed rate range under heavy pest
pressure.
Whiteflies have shown a tendency to develop insecticide
resistance. For resistance management purposes,
alternating applications of different chemical classes
reduces the potential for resistance development.
RESTRICTIONS: Cucurbits (within Crop Group 9)
• For any of the pests listed above, use the high rate within the listed rate range under heavy pest pressure.
• Do not make more than 5 applications per calendar year.
• Do not apply more than once every 5 days.
• Do not apply less than 0 days before harvest (PHI = 0 days).
• Do not exceed a total of 0.5 lb. acetamiprid active ingredient (11.5 ozs of ASSAIL70 WP [OR where on WSP: Assail 70 WSP Insectic ide] product) per acre
per calendar year including any pre-transplant applications of acetamiprid (maximum pre-transplant application rate of acetamiprid is 0.15 lb ai/A).
TREE NUTS (within Crop Group 14-12)
SPRAY VOLUME FOR TREE NUTS (within Crop Group 14-12) : Apply in a minimum finished spray volume of 10 gallons per acre by air or 50 gallons per
acre by ground.
SITE PEST
DOSAGE PER ACRE
PEST-SPECIFIC DIRECTIONS USE DIRECTIONSPOUNDS
ACTIVE
OUNCES
ASSAIL™
70 WP
INSECTICIDE
[OR WHERE
ON WSP:
ASSAIL 70
WSP
INSECTICIDE]
TREE NUTS
CROP GROUP
(within Crop
Group 14-12) :
African nut-tree,
Almond, Beech
nut, Brazil nut,
Brazilian pine,
Bunya, Bur oak,
Butternut, Cajou
nut, Candlenut,
Cashew,
Chestnut,
Chinquapin,
Coconut,
Coquito nut,
Dika nut,
Ginkgo, Guiana
chestnut,
Hazelnut (filbert)
, Heartnut,
Hickory nut,
Aphids
Leafhoppers
0.05 – 0.18 1.1 – 4.1 Aphid species may differ in
susceptibility to this product. If you
are unsure of the aphid species
present and its susceptibility, use
the higher rates within the listed
rate range. Use the higher rates
within the listed rate range for
Black Pecan Aphid.
On large mature trees use of the
higher rate within the listed rate
range may be necessary for
adequate control at the top of the
trees. Use of an appropriate
adjuvant will improve coverage
and control.
Begin applications when treatment
thresholds have been reached.
Thorough coverage is important to
obtain optimum control.
Complete sprays (every row) are
recommended.
Use of pheromone traps in conjunction
with degree days are good indicators
that can be used to determine spray
timings.
Consult your local Extension Service,
Crop Advisor or Nippon Soda Co., Ltd.
representative for additional information.
Glassywinged
sharpshooter
Pecan Nut
Casebearer
0.075 - 0.125 1.7 – 2.9

Clean copy DRAFT 6-8-21

25
Japanese horse-
chestnut,
Macadamia
(bush nut),
Mongongo nut,
Monkey-pot,
Monkey puzzle
nut, Okari nut,
Pachira nut,
Peach palm nut,
Pecan, Pequi,
Pili nut, Pine nut,
Pistachio,
Sapucaia nut,
Tropical almond,
Walnut (black
and English),
Yellowhorn, and
cultivars,
varieties and/or
hybrids of these
Codling Moth
Oriental Fruit
Moth
Peach Twig
Borer
San Jose Scale
Hickory
Shuckworm
Pecan Weevil
Red Humped
Caterpillar
Filbertworm
Navel
Orangeworm
0.10 - 0.18 2.3 – 4.1
Residual control varies by rate.
Use the higher rates within the
listed rate range for extended
control and on tall, mature trees
with dense foliage.
For control of Oriental Fruit Moth
(OFM) and Peach Twig Borer
(PTB), make a delayed dormant
application with oil prior to bud
break. For Codling Moth, OFM,
and PTB, make in-season
applications at moth flights using
appropriate degree day models.
The addition of horticultural oil is
recommended for improved
performance. Consult local
recommendations regarding the
use of oil.
For best results against San Jose
Scale, apply as a dormant/delayed
dormant application with oil, and
time in-season applications for the
crawler stage.
For best results against Pecan
Weevil use the highest rate within
the listed rate ran
ge.
Walnut Husk
Fly
0.12 – 0.15 2.7 – 3.4
Apply once gravid (egg producing)
adult females are observed. Add a
recommended rate of husk fly bait.
If needed repeat application in 3 to
4 weeks.
Gill’s Mealybug 0.15 3.4 Apply as crawlers emerge,
typically in early to mid-June.
Apply with sufficient water to
provide thorough coverage of all
surfaces. Inclusion of a
horticultural oil or penetrating
adjuvant (no stickers) may
enhance control.
RESTRICTIONS: Tree Nuts (within Crop Group 14-12)
• For any of the pests listed above, use the high rate within the listed rate range under heavy pest pressure.
• Do not make more than 4 applications per calendar year.
• Do not apply more than once every 14 days.
• Do not apply less than 14 days before harvest (PHI = 14 days).
• Do not exceed a total of 0.72 lb. active ingredient (16.4 ozs product) per acre per calendar year.
EDIBLE PODDED LEGUME VEGETABLES (within Crop Sub-Group 6A)
and SUCCULENT SHELLED PEAS AND BEANS (within Crop Sub-Group 6B)
SPRAY VOLUME FOR EDIBLE PODDED LEGUME VEGETABLES (within Crop Sub-Group 6A) AND SUCCULENT SHELLED PEAS AND BEANS (within
Crop Sub-Group 6B): Apply in a minimum finished spray volume of 5 gallons per acre by air or 20 gallons per acre by ground.
SITE PEST DOSAGE PER ACRE USE DIRECTIONS

Clean copy DRAFT 6-8-21

26
POUNDS
ACTIVE
OUNCES ASSAIL
70 WP INSECTICIDE
[OR WHERE ON WSP:
ASSAIL 70 WSP
INSECTICIDE]
EDIBLE PODDED
LEGUME
VEGETABLES
(within Crop Sub-
Group 6A) and
SUCCULENT
SHELLED PEAS
AND BEANS (within
Crop Sub-Group
6B)
Bean (Phaseolus
spp.) (includes runner
bean, snap bean, wax
bean, lima
bean(green)); Bean
(Vigna spp.) (includes
asparagus bean,
Chinese longbean,
moth bean, yardlong
bean, blackeyed pea,
cowpea, southern pea);
Jackbean; Broad Bean
(succulent); Pea (Pisum
spp.) (includes dwarf
pea, edible-pod pea,
snow pea, sugar snap
pea, English pea,
garden pea, green pea);
Soybean (immature
seed); Sword Bean; and
Pigeon Pea.
Aphids
Leafhoppers
Cucumber Beetles
Bean Leaf Beetle
Mexican Bean Beetle
0.044 – 0.1 1.0 – 2.3 Begin applications when treatment thresholds have been
reached.
Thorough coverage is important to obtain optimum control.
Aphid and Thrips species may differ in susceptibility to this
product. If you are unsure of the aphid or thrips species
present and its susceptibility, use the higher rates within
the listed rate range.
Whitefly 0.075 – 0.1 1.7 – 2.3
Thrips 0.085 – 0.1 1.9 – 2.3
RESTRICTIONS: Edible podded legume vegetables (within Crop Sub-Group 6A) and succulent shelled peas and beans (within Crop Sub-Group 6B)
• Do not make more than 3 applications per calendar year.
• Do not apply more than once every 7 days.
• Do not apply less than 7 days before harvest (PHI = 7 days).
• Do not exceed a total of 0.3 lb. active ingredient (6.9 ozs product) per acre per calendar year.
STRAWBERRIES AND OTHER LOW GROWING BERRIES (within Crop Sub-Group 13-07G)
SPRAY VOLUME FOR STRAWBERRIES AND OTHER LOW GROWING BERRIES (within Crop Sub-Group 13-07G): Apply in a minimum finished spray
volume of 10 gallons per acre by air or 20 gallons per acre by ground.
SITE PEST
DOSAGE PER ACRE
USE DIRECTIONSPOUNDS
ACTIVE
OUNCES ASSAIL
70 WP INSECTICIDE
[OR WHERE ON WSP:
ASSAIL 70 WSP
INSECTICIDE]

Clean copy DRAFT 6-8-21

27
STRAWBERRIES
AND OTHER LOW
GROWING
BERRIES (within
Crop Sub-Group 13-
07G);
Bearberry;
Bilberry;
Lowbush Blueberry;
Cloudberry;
Cranberry;
Lingonberry;
Muntries;
Partridgeberry; and
cultivars, varieties,
and/or hybrids of these.
Blueberry Maggot
Spanworm
Cherry Fruitworm
Cranberry Fruitworm
Flea Beetle
Japanese Beetle
Oblique Banded Leaf
Roller
Plantbugs
(Lygus spp.)
Sap Beetles
Thrips
Whiteflies
Fireworm
(suppression)
Gypsy Moth
Sparganothis
Fruitworm
Cranberr
y Tipworm
0.075 – 0.13 1.7 – 3.0 Aphid and thrips species may differ in susceptibility to this
product. If you are unsure of the species present and its
susceptibility, use the higher rates within the listed rate
range.
Begin applications when treatment thresholds have been
reached.
Use the higher rates within the listed rate range under
conditions of heavy pest pressure.
Thorough coverage is important to obtain optimum control.Aphids
Leafhoppers
Spittlebug
0.035 – 0.075 0.8 – 1.7
RESTRICTIONS: STRAWBERRIES AND OTHER LOW GROWING BERRIES (within Crop Sub-Group 13-07G)
• Do not exceed a total of 6.0 oz. of ASSAIL 70 WP Insecticide [OR where on WSP: Assail 70 WSP Insecticide] (0.26 lb ai) per acre pe r calendar year.
• Do not make more than 2 applications per calendar year.
• Do not apply more than once every 7 days.
• Do not apply less than 1 day before harvest (PHI = 1 day).
• Do not flood cranberry bogs within 60 days following an application of ASSAIL 70 WP [OR where on WSP: Assail 70 WSP Insecticide ].
• Do not grow more than one crop of cranberries per calendar year.
BLUEBERRIES AND OTHER BUSH AND CANE BERRIES (within Crop Sub-Groups 13-07 A and B)
SPRAY VOLUME FOR BLUEBERRIES AND OTHER BUSH AND CANE BERRIES (within Crop Sub-Groups 13-07 A and B): Apply in a minimum finished
spray volume of 5 gallons per acre by air or 20 gallons per acre by ground.
SITE PEST
DOSAGE PER ACRE
USE DIRECTIONSPOUNDS
ACTIVE
OUNCES ASSAIL
70 WP INSECTICIDE
[OR WHERE ON WSP:
ASSAIL 70 WSP
INSECTICIDE]
BLUEBERRIES AND
OTHER BUSH
BERRIES (within
Crop Sub-Group 13-
Aphids
Leafhoppers
0.044 – 0.1 1.0 - 2.3 Begin applications when treatment thresholds have been
reached.
Thorough coverage is important to obtain optimum control.Whitefly 0.075 – 0.1 1.7 – 2.3

Clean copy DRAFT 6-8-21

28
07B) Aronia berry;
blueberry, highbush and
lowbush; buffalo
currant; Chilean guava;
currant, red and black;
elderberry; European
barberry; gooseberry;
cranberry, highbush;
edible honeysuckle;
huckleberry; jostaberry;
Juneberry; lingonberry;
native currant; salal;
sea buckthorn; and
cultivars, varieties,
and/or hybrids of these.
CANE BERRIES
(within Crop Sub-
Group 13-07A)
Blackberry, Loganberry,
Raspberry (black and
red), wild raspberry, and
cultivars, varieties,
and/or h
ybrids of these.
Japanese Beetle
Blueberry Maggot
Sap Beetles
Tarnished Plant Bug
Strawberry Rootworm
Cranberry Fruitworm
Cherry Fruitworm
Flea Beetle
Spanworm
Thrips
Blueberry Gall Midge
Western Raspberry
Fruit Worm (adult)
0.085 – 0.1 1.9 – 2.3 Aphid and Thrips species may differ in susceptibility to this
product. If you are unsure of the aphid or thrips species
present and its susceptibility, use the higher rates within
the listed rate range.
RESTRICTIONS: Blueberries and Other Bush and Cane Berries (within Crop Sub-Groups 13-07 A and B)
• Do not make more than 5 applications per calendar year.
• Do not apply more than once every 7 days.
• Do not apply less than 1 day before harvest (PHI = 1 day).
• Do not exceed a total of 0.5 lb. active ingredient (11.4 ozs product) per acre per calendar year.
ONIONS AND OTHER BULB VEGETABLES (within Crop Group 3-07)
SPRAY VOLUME FOR ONIONS AND OTHER BULB VEGETABLES (within Crop Group 3-07): Apply in a minimum finished spray volume of 5 gallons per
acre by air or 20 gallons per acre by ground.
SITE PEST
DOSAGE PER ACRE
USE DIRECTIONSPOUNDS
ACTIVE
OUNCES ASSAIL
70 WP INSECTICIDE
[OR WHERE ON WSP:
ASSAIL 70 WSP
INSECTICIDE]
ONIONS AND
OTHER BULB
VEGETABLES
(within Crop Group
3-07)
Chives, fresh leaves;
Chinese chives, fresh
leaves; daylily bulbs,
Elegans hosta, Fritillaria
leaves and bulbs; bulb
garlic; great headed
bulb garlic, serpent bulb
garlic; kurrat; lady's
leek; leek; wild leek; lily
bulb; Beltsville bunching
onion; bulb onion;
Chinese bulb onion;
fresh onion; green
onion; macrostem
onion; pearl onion;
potato bulb onion;
treetops onion; Welsh
onion tops; shallot bulb
and fresh leaves; and
cultivars, varieties,
and/or h
ybrids of these.
Thrips 0.094 – 0.15 2.1 - 3.4 Begin applications when treatment thresholds have been
reached.
Thorough coverage is important to obtain optimum control.
Thrips species may differ in susceptibility to this product.
If you are unsure of the thrips species present and its
susceptibility, use the higher rates within the listed rate
range.
The use of spray adjuvants, such as silicone-based
surfactants or horticultural oils, may also enhance
coverage and improve pest control.

Clean copy DRAFT 6-8-21

29
RESTRICTIONS: Onions and other Bulb Vegetables (within Crop Group 3-07)
• Do not make more than 4 applications per calendar year.
• Do not apply more than once every 7 days.
• Do not apply less than 7 days before harvest (PHI = 7 days).
• Do not exceed a total of 0.6 lb. acetamiprid active ingredient (13.7 ozs of ASSAIL 70 WP [OR where on WSP: Assail 70 WSP Insecticide] product) per acre
per calendar year including any pre-transplant applications of acetamiprid (maximum pre-transplant application rate of acetamiprid is 0.15 lb ai/A).
CLOVER (for use in ID, OR, and WA only)
SPRAY VOLUME FOR CLOVER: Apply in a minimum finished spray volume of 5 gallons per acre by air or 20 gallons per acre by ground.
SITE PEST
DOSAGE PER ACRE
USE DIRECTIONSPOUNDS
ACTIVE
OUNCES ASSAIL
70 WP INSECTICIDE
[OR WHERE ON WSP:
ASSAIL 70 WSP
INSECTICIDE]
CLOVER Aphids
including clover
and pea aphid
0.05-0.075 1.1 – 1.7 Begin applications when treatment thresholds have been
reached.
Thorough coverage is important to obtain optimum control.
RESTRICTIONS: CLOVER (for use in ID, OR, and WA only)
• Do not make more than one application per calendar year.
• Do not exceed a total of 0.075 lb. acetamiprid active ingredient (1.7 ozs of ASSAIL 70 WP product) [OR where on WSP: Assail 70 WSP] per acre per calendar
year.
• Do not apply less than 30 days before harvest (PHI = 30 days).
ASPARAGUS
SPRAY VOLUME FOR ASPARAGUS: Apply in a minimum finished spray volume of 5 gallons per acre by air or 20 gallons per acre by ground.
SITE PEST
DOSAGE PER ACRE
USE DIRECTIONSPOUNDS
ACTIVE
OUNCES ASSAIL
70 WP INSECTICIDE
[OR WHERE ON WSP:
ASSAIL 70 WSP
INSECTICIDE]
ASPARAGUS
Asparagus thrips 0.1 2.3 Begin applications when treatment thresholds have been
reached.
Thorough coverage is important to obtain optimum control.
Japanese beetle
Tarnished plant bug
Apply to foliage after the cutting season.
Begin applications when treatment thresholds have been
reached.
Thorough coverage is important to obtain optimum control
Asparagus miner
(suppression)
Apply to adults before egg laying.
Begin applications when treatment thresholds have been
reached.
Thorough coverage is important to obtain optimum control
Leaf hopper 0.05 – 0.075 1.1 – 1.7
Begin applications when treatment thresholds have been
reached.
Thorough coverage is important to obtain optimum control

Clean copy DRAFT 6-8-21

30
Asparagus aphids 0.05 – 0.1 1.1 – 2.3
Apply to new plantings and when plants are young.
Begin applications when treatment thresholds have been
reached.
Thorou
gh coverage is important to obtain optimum control
Asparagus beetle
Spotted asparagus
beetle
0.05 – 0.1 1.1 – 2.3 Begin sampling early in the season and throughout the
growing season.
Begin applications when treatment thresholds have been
reached.
Thorough coverage is important to obtain optimum control.
RESTRICTIONS: Asparagus
• Do not make more than two (2) applications per calendar year.
• Do not apply more than once every 10 days.
• Do not apply less than 1 day before harvest (PHI = 1 day).
• Do not exceed a total of 0.2 lb. active ingredient (4.6 ozs product) per acre per calendar year.
SWEET CORN
SPRAY VOLUME FOR SWEET CORN: Apply in a minimum finished spray volume of 5 gallons per acre by air or 20 gallons per acre by ground.
Begin applications when treatment thresholds have been reached.
Thorough coverage is important to obtain optimum control.
SITE PEST
DOSAGE PER ACRE
SPECIFIC DIRECTIONSPOUNDS
ACTIVE
OUNCES ASSAIL
70 WP INSECTICIDE
[OR WHERE ON WSP:
ASSAIL 70 WSP
INSECTICIDE]
Sweet Corn Corn flea beetle 0.075 – 0.1 1.7 – 2.3 Apply up to 2 applications on a 14-day interval.
Begin scouting from emergence to corn up to 12
inches tall. Do not apply at this rate less than 7 days
before harvest (PHI = 7 days)
Northern, Western,
and Southern
Rootworm Beetles
(adults)
0.075 – 0.1 1.7 – 2.3 Apply up to 2 applications on a 14-day spray interval
during corn silking. Do not apply at this rate less than
7 days before harvest (PHI = 7 days)
Aphids,
Corn leaf aphid
Vegetable aphid
0.04 – 0.054 0.9 – 1.2 Apply up to 4 applications on a 7-day spray interval
(if applied in a rotation or tank mixture with another
insecticide). Do not apply at this rate less than 1 day
before harvest (PHI = 1 day)
Japanese beetle 0.1 2.3 Begin scouting when beetles are first observed.
Corn silking is when plants are most vulnerable to
feeding. Do not make more than 2 applications on a
14-day spray interval. Do not apply at this rate less
than 7 days before harvest (PHI = 7 days)
Corn (Dusky) Sap
Beetle
0.075 – 0.1 1.7 – 2.3 Apply up to 2 applications on a 14-day spray interval
during corn tasseling and silking. Do not apply at this
rate less than 7 days before harvest (PHI = 7 days)
Stink bugs
(suppression) ,
Corn silk fly
(suppression)
0.1 2.3 Apply up to 2 applications on a 14-day spray interval.
Do not apply at this rate less than 7 days before
harvest (PHI = 7 days)
RESTRICTIONS: SWEET CORN
• Do not exceed a total of 0.21 lb. active ingredient (4.8 ozs product) per acre per calendar year.
• Do not make more than two (2) applications at the 2.3 ozs product rate per calendar year or more than four (4) applications at the 1.2 ozs product rate per
calendar year.

Clean copy DRAFT 6-8-21

31
Conditions of Sale and Limitation of Warranty and Liability
The Directions for Use of this product must be followed carefully. It is impossible to eliminate all risks inherently
associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences may result
because of such factors as manner of use or application, weather or crop conditions, presence of other materials,
resistant strains or other influencing factors in the use of the product, which are beyond the control of Nippon Soda
Co., Ltd. or Seller. All such risks shall be assumed by Buyer and User, and Buyer and User agree to hold Nippon
Soda Co., Ltd. and Seller harmless for any claims relating to such factors.
To the extent allowed by applicable laws, Nippon Soda Co., Ltd. warrants that this product conforms to the chemical
description on the label and is reasonably fit for the purposes stated in the Directions for Use, subject to the inherent
risks referred to above, when used in accordance with directions under normal use conditions. This warranty does
not extend to the use of the product contrary to label instructions, or under abnormal conditions or under conditions
not reasonably foreseeable to or beyond the control of Seller or Nippon Soda Co., Ltd., and Buyer and User assume
the risk of any such use. TO THE EXTENT ALLOWABLE BY APPLICABLE LAW, NIPPON SODA CO., LTD. MAKES
NO WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE NOR ANY OTHER
EXPRESS OR IMPLIED WARRANTY EXCEPT AS STATED ABOVE.
To the extent allowed by applicable laws, in no event shall Nippon Soda Co., Ltd. or Seller be liable for any incidental,
consequential or special damages resulting from the use or handling of this product. TO THE EXTENT ALLOWABLE
BY APPLICABLE LAW THE EXCLUSIVE REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY
OF NIPPON SODA CO., LTD. AND SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES
(INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, CONTRACT, NEGLIGENCE, TORT, STRICT
LIABILITY OR OTHERWISE) RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, SHALL BE THE
RETURN OF THE PURCHASE PRICE OF THE PRODUCT OR, AT THE ELECTION OF NIPPON SODA CO., LTD.
OR SELLER, THE REPLACEMENT OF THE PRODUCT.
Nippon Soda Co., Ltd. and Seller offer this product, and Buyer and User accept it, subject to the foregoing conditions
of sale and limitations of warranty and of liability, which may not be modified except by written agreement signed by a
duly authorized representative of Nippon Soda Co., Ltd.
ASSAIL is a Registered Trademark of Nippon Soda Co., Ltd.