Files

T

Image rebuild (skip scrape) / build (push) Successful in 1h46m17s

Details

perf(epa_ppls): make the monthly refresh fit the runner's 3 h budget (#3 )

Co-authored-by: claude <[email protected]>

2026-09-01 16:40:48 -04:00

91 KiB

Raw Blame History

Degree Xtra Herbicide

Product class: herbicide
EPA Reg No: 524-511
Active ingredients: Acetochlor, 2-chloro-N-ethoxymethyl-N-(2-ethyl-6-methylphenyl)acetamide, Atrazine, 2-chloro-4-(ethylamino)-6-(isopropylamino)-s-triazine and related triazines
Source: https://www.cropscience.bayer.us/crop-protection/herbicide/degree-xtra-herbicide
Label PDF: https://cs-assets.bayer.com/is/content/bayer/Degree_Xtra_Herbicide_Bayer_Label1gtpdf

Herbicide GROUP GROUP 5 15 HERBICIDE HERBICIDE ATRAZINE ACETOCHLOR US62211898D 211110Dv2 06/25 DEGREE XTRA ® HERBICIDE is an encapsulated herbicide for weed control in Field Corn, Production Seed Corn, Silage Corn, Sweet Corn, Popcorn, and Grain Sorghum (milo). ACTIVE INGREDIENTS: *Acetochlor, 2-chloro-N-ethoxymethyl-N-(2-ethyl-6-methylphenyl)acetamide . . . . . . . . . . . . . 29.0% **Atrazine, 2-chloro-4-(ethylamino)-6-(isopropylamino)-s-triazine and related triazines . . . . . . 14.5% OTHER INGREDIENTS: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56.5% 100.0%

Contains 324 grams per liter or 2 .70 pounds per U . S . gallon of the active ingredient acetochlor . ** Contains 161 grams per liter or 1 .34 pounds per U . S . gallon of the active ingredient atrazine and related triazines . Protected by U . S . Patent Nos . 5,225,570 and 5,925,595 . No license granted under any non-U . S . patent(s) EPA Reg. No. 524-511 KEEP OUT OF REACH OF CHILDREN CAUTION! See Label booklet for complete Directions for Use. SHAKE WELL BEFORE USING Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk Counties of New York State . Not for use in the states of Hawaii or Alaska, or in the U . S . territories (Puerto Rico, Guam, American Samoa, the U . S . Virgin Islands, and the North Mariana Islands) . FOR PRODUCT INFORMATION OR ASSISTANCE IN USING THIS PRODUCT, CALL TOLL-FREE, 1-866-99BAYER (1-866-992-2937) IN CASE OF AN EMERGENCY INVOLVING THIS HERBICIDE PRODUCT, OR FOR MEDICAL ASSISTANCE, CALL COLLECT, DAY OR NIGHT, 1-800-334-7577 Packed for: Bayer CropScience LP 800 N. Lindbergh Blvd. St. Louis, Missouri 63167 USA ©2025 Bayer Group RESTRICTED USE PESTICIDE due to ground and surface water concerns . For retail sale to and use only by Certified Applicators, or persons under their direct supervision and only for those uses covered by the Certified Applicator’s certification . HERBICIDE2.5 Gallons Herbicide US62211898D (211110Dv2) DEGREE XTRA MINIBULK ECL Color: CMYK Date: 06/17/2025 (Label Coordinator: Danielle Ohlendorf) Escanee el código QR para español Scan QR Code for Spanish 6.875” 7.125” 6.875” 6.625” COPY AREA COPY AREA

1 Read the entire label before using this product . Use only according to label instructions . Read “LIMIT OF WARRANTY AND LIABILITY” before buying or using . If terms are not acceptable, return at once unopened . THIS IS AN END-USE PRODUCT . BAYER DOES NOT INTEND AND HAS NOT REGISTERED IT FOR REFORMULATION . IT IS INTENDED THAT REPACKAGING BE ONLY IN ACCORDANCE WITH A BAYER REPACKAGING OR TOLL REPACKAGING AGREEMENT . CONTENTS PRODUCT INFORMATION 1 1 .0 INGREDIENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 2 2 .0 IMPORTANT PHONE NUMBERS . . . . . . . . . . . . . . . . . . . . . . . . .1 3 3 .0 PRECAUTIONARY STATEMENTS . . . . . . . . . . . . . . . . . . . . . . . .1 3 . 1 Hazar ds to Humans and Domestic Animals . . . . . . . . . . . . . . .1 3 . 2 Environmental Hazar ds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 DIRECTIONS FOR USE 4 4 .0 STORAGE AND DISPOSAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 5 5 .0 PRODUCT INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 5 . 1 Use Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 5 . 2 T ile-Outletted Terraced Fields Containing Standpipes . . . . . . .3 6 6 .0 WEED RESISTANCE MANAGEMENT . . . . . . . . . . . . . . . . . . . . .3 7 7 .0 SOIL TEXTURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 8 8 .0 MIXING, SPRAYING AND HANDLING INSTRUCTIONS . . . . . . . .4 8 . 1 Equipment Cleaning & Repair . . . . . . . . . . . . . . . . . . . . . . . . . .4 8 . 2 Spr ayer Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 8 . 3 Standar d Sprayable Fluid Fertilizer Compatibility Test . . . . . . .4 9 9 .0 APPLICATION SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 9 . 1 Ground Broadcast Treatment . . . . . . . . . . . . . . . . . . . . . . . . . . .5 9 . 2 Ground Band Treatment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 10 10 .0 APPLICATION TIMING AND METHODS . . . . . . . . . . . . . . . . . . .5 10 . 1 Early Pr eplant Surface Application . . . . . . . . . . . . . . . . . . . . . .5 10 . 2 Pr eplant Incorporation Application . . . . . . . . . . . . . . . . . . . . . .5 10 . 3 Pr eemergence Surface Application . . . . . . . . . . . . . . . . . . . . . .5 10 . 4 Postemer gence Surface Application . . . . . . . . . . . . . . . . . . . . .5 10 . 5 Cultiv ation Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 11 11 .0 WEEDS CONTROLLED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 11 . 1 Annual Gr asses Controlled . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 11 . 2 Annual Broadlea ves Controlled . . . . . . . . . . . . . . . . . . . . . . . . .5 11 . 3 Annual Gr asses Partially Controlled . . . . . . . . . . . . . . . . . . . . .5 11 . 4 Annual Broadlea ves Partially Controlled . . . . . . . . . . . . . . . . . .5 12 12 .0 CORN CONSERVATION OR MINIMUM TILLAGE SYSTEMS . . . .6 12 . 1 At-Planting Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 12 . 2 Control or Suppr ession of Emerged Weeds . . . . . . . . . . . . . . . .6 12 . 2 . 1 Roundup Ag ricultural Herbicides . . . . . . . . . . . . . . .6 12 . 2 . 2 Gr amoxone Brand herbicides . . . . . . . . . . . . . . . . . .6 12 . 2 . 3 2,4-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 12 . 3 Early Preplant Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 12 . 3 . 1 DEGREE XTRA HERBICIDE . . . . . . . . . . . . . . . . . . . . .6 13 13 .0 CORN CONVENTIONAL TILLAGE SYSTEMS . . . . . . . . . . . . . . . .7 13 . 1 DEGREE XTRA HERBICIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 13 . 2 DEGREE XTRA HERBICIDE plus Roundup Agricultural Herbicides Postemer gence on Corn containing Roundup Read y Corn 2 Technology . . . . . . . . . . . . . . . . . . . . . .7 14 14 .0 TANK-MIXTURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 14 . 1 DEGREE XTRA HERBICIDE Tank-Mixtures for Preemergence Use in Cor n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 14 . 2 DEGREE XTRA HERBICIDE Tank-Mixtures for Postemergence Use in Cor n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 15 15 .0 GRAIN SORGHUM (MILO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 16 16 .0 LIMIT OF WARRANTY AND LIABILITY . . . . . . . . . . . . . . . . . . .8 PRODUCT INFORMATION 1.0 INGREDIENTS ACTIVE INGREDIENTS:

Acetoc hlor, 2-chloro-N-ethoxymethyl-N- (2-ethyl-6-methylphenyl)acetamide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29.0% ** Atrazine, 2-chloro-4-(ethylamino)-6-(isopropylamino) -s-triazine and related triazines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.5% OTHER INGREDIENTS: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56.5% . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100.0% *Contains 324 grams per liter or 2 .70 pounds per U . S . gallon of the active ingredient acetochlor . **Contains 161 grams per liter or 1 .34 pounds per U . S . gallon of the active ingredient atrazine and related triazines . Protected by U . S . Patent Nos . 5,225,570 and 5,925,595 . No license granted under any non-U . S . patent(s) 2.0 IMPOR TANT PHONE NUMBERS FOR PRODUCT INFORMATION OR ASSISTANCE IN USING THIS PRODUCT, CALL TOLL-FREE, 1-866-99BAYER (1-866-992-2937) IN CASE OF AN EMERGENCY INVOLVING THIS HERBICIDE PRODUCT, OR FOR MEDICAL ASSISTANCE, CALL COLLECT, DAY OR NIGHT, 1-800-334-7577 3.0 PREC AUTIONARY STATEMENTS 3.1 Hazards to Humans and Domestic Animals Keep out of reach of children. CAUTION! Prolonged or repeated skin contact may cause allergic reactions in some individuals . Avoid contact with skin or clothing . Wash thoroughly with soap and water after handling . FIRST AID IF ON SKIN OR ON CLOTHING • T ake off contaminated clothing . • Rinse skin immediately with plenty of w ater for 15 to 20 minutes . • Call a poison control center or doctor for tr eatment advice . • Sensitized persons should a void further contact and reuse of contaminated clothing . • Ha ve the product container or label with you when calling a poison control center or doctor, or going for treatment . • Y ou may also contact 1-800-334-7577, collect day or night, for emergency medical treatment information . • This product is identified as DEGREE XTRA HERBICIDE, EPA Registration No. 524-511 . Personal Protective Equipment (PPE) Mixers, loaders, applicators, and other handlers must wear: long-sleeved shirt and long pants, waterproof gloves shoes plus socks, chemical-resistant apron when mixing/loading, cleaning up spills, or cleaning equipment, or otherwise exposed to the concentrate . See Engineering Controls for additional requirements . Engineering Controls: When applicators use enclosed cabs in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170 .240 (d) (5)], the handler PPE requirements may be reduced or modified as specified in the WPS . Follow manufacturer’s instructions for cleaning/maintaining PPE . If no such instructions for washables exist, use detergent and hot water . Keep and wash PPE separately from other laundry . Discard clothing or other absorbent materials that have been drenched or heavily contaminated with the product’s concentrate . Do not reuse them . IMPORTANT: When reduced PPE is worn because an enclosed cab is being used, applicators must be provided all PPE specified above for “applicators and other handlers” and have such PPE immediately available for use in an emergency, such as a spill or equipment breakdown . User Safety Recommendations Users should: • W ash hands before eating, drinking, chewing gum, using tobacco or using the toilet . • Remo ve clothing/PPE immediately if pesticide gets inside . Then wash thoroughly and put on clean clothing . • Remo ve PPE immediately after handling this product . Wash the outside of gloves before removing . As soon as possible, wash thoroughly and change into clean clothing . 3.2 Environmental Hazards NON-TARGET ORGANISM ADVISORY STATEMENT: This product is toxic to plants and may adversely impact the forage and habitat of non-target organisms, including pollinators, in areas adjacent to the treated site . Protect the forage and habitat of non-target organisms by following label directions intended to minimize spray drift . Atrazine can travel (seep or leach) through soil and can enter ground water which may be used as drinking water . Atrazine has been found in ground water . Users are advised not to apply atrazine to sand and loamy sand soils where the water table (ground water) is close to the surface and where these soils are very permeable, i .e . , well drained . Your local agricultural agencies can provide further information on the type of soil in your area and the location of ground water . Ground water contamination may be reduced by diking and flooring of permanent liquid bulk storage sites with an impermeable material . This product is toxic to fish and aquatic invertebrates . Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark . Do not apply when weather conditions favor drift from treated areas . Runoff and drift from treated areas may be hazardous to aquatic organisms in neighboring areas . Do not contaminate water when disposing of equipment washwaters . GROUNDWATER ADVISORY: Acetochlor is known to leach through soil into groundwater under certain conditions as a result of label use . This chemical may leach into groundwater if used in areas where soils are permeable, particularly where the water table is shallow . SURFACE WATER ADVISORY: This product may impact surface water quality due to runoff of rainwater . This is especially true for poorly draining soils and soils with shallow ground water . This product is classified as having high potential for reaching surface water via runoff for several weeks after application . A level, well-maintained vegetative buffer strip between areas to which this product is applied and surface water features such as ponds, streams, and springs will reduce the potential loading of acetochlor from runoff water and sediment . Runoff of this product will be reduced by avoiding applications when rainfall or irrigation is expected to occur within 48 hours . See Sections 5.1, Use Restrictions, and 5.2, Tile-Outletted Terraced Fields Containing Standpipes, for additional specific information. DIRECTIONS FOR USE It is a violation of Federal law to use this product in any manner inconsistent with its labeling . RESTRICTED USE PESTICIDE due to ground and surface water concerns . For retail sale to and use only by Certified Applicators, or persons under their direct supervision and only for those uses covered by the Certified Applicator’s certification . 7.125” 6.875” 6.495” COPY AREA COPY AREA 6.625”

2 This product can only be used in accordance with the Directions for Use on this label or in separately published Bayer Supplemental Labeling . Do not apply this product in a way that will contact workers or other persons, either directly or through drift . Only protected handlers may be in the area during application . For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulations . ANY USE OF THIS PRODUCT IN AN AREA WHERE USE IS PROHIBITED IS A VIOLATION OF FEDERAL LAW . Before using this product, you must consult the Atrazine Watershed Information Center (AWIC) to determine whether the use of this product is prohibited in your watershed . AWIC can be accessed through www . atrazine-watershed . info or 1-866-365-3014 . If use of this product is prohibited in your watershed, you may return this product to your point of purchase or contact Bayer for a refund . Endangered Species It is a Federal offense to use any pesticide in a manner that results in an unauthorized “take” (e . g . , kill or otherwise harm) of an endangered species under the Endangered Species Act section 9 . When using this product, you must follow the measures contained in the Endangered Species Protection Bulletin for the area in which you are applying the product . You must obtain a Bulletin no earlier than six months before using this product . To obtain Bulletins, consult http://www . epa . gov/espp/, call 1-844-447-3813, or email ESPP@epa .gov . You must use the Bulletin valid for the month in which you will apply the product .” Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk Counties of New York State . Not for use in the states of Hawaii or Alaska, or in the U . S . territories (Puerto Rico, Guam, American Samoa, the U . S . Virgin Islands, and the North Mariana Islands) . Agricultural Use Requirements Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170 . This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides . It contains requirements for training, decontamination, notification, and emergency assistance . It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and restricted-entry interval . The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard . Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours . Exception: if the product is soil-injected or soil-incorporated, the Worker Protection Standard, under certain circumstances, allows workers to enter the treated area if there will be no contact with anything that has been treated . PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is: coveralls, shoes plus socks and waterproof gloves . 4.0 STORAGE AND DISPOSAL Do not contaminate water, food, or feed by storage and disposal . PESTICIDE STORAGE: Store pesticides away from food, pet food, feed, seed, fertilizers, and veterinary supplies . Keep container closed to prevent spills and contamination . PESTICIDE DISPOSAL: To avoid wastes, use all material in this container, including rinsate, by application in accordance with label directions . If wastes cannot be avoided, offer remaining product to a waste disposal facility or pesticide disposal program . Such programs are often run by state or local governments or by industry . All disposal must be in accordance with applicable federal, state and local regulations and procedures . CONTAINER HANDLING AND DISPOSAL FOR NONREFILLABLE RIGID PLASTIC 2 .5-GALLON CONTAINERS AND OTHER CONTAINERS OF GREATER THAN 1-GALLON BUT EQUAL TO OR LESS THAN 5-GALLON CAPACITY: Nonrefillable container . Do not reuse this container to hold materials other than pesticides or dilute pesticides (rinsate) . After emptying and cleaning, it may be allowable to tempor arily hold rinsate or other pesticide-related materials in the container . Contact your state regulatory agency to determine allowable practices in your state . Triple rinse or pressure rinse (or equivalent) this container promptly after emptying . Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip . Fill the container 1/4 full with water and recap . Shake for 10 seconds . Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal . Drain for 10 seconds after the flow begins to drip . Repeat this procedure two more times . Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip . Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal . Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 PSI for at least 30 seconds . Drain for 10 seconds after the flow begins to drip . Once properly rinsed, some agricultural plastic pesticide containers can be taken to a container collection site or picked up for recycling . To find the nearest site, contact your chemical dealer or Bayer at 1-800-768-6387 . If recycling is not available, dispose of in accordance with federal, state, and local regulations and procedures, which may include puncturing the properly rinsed container and disposing in a sanitary landfill . FOR NONREFILLABLE RIGID PLASTIC 30-GALLON CONTAINERS AND OTHER CONTAINERS OF GREATER THAN 5-GALLON CAPACITY: Nonrefillable container . Do not reuse or refill this container . Triple rinse or pressure rinse (or equivalent) this container promptly after emptying . Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank . Fill the container 1/4 full with water . Replace and tighten closures . Tip container on its side and roll it back and forth, ensuring at least one revolution, for 30 seconds . Stand the container on its end and tip it back and forth several times . Turn the container over onto its other end and tip it back and forth several times . Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal . Drain for 10 seconds after the flow begins to drip . Repeat this procedure two more times . Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip . Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal . Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 PSI for at least 30 seconds . Drain for 10 seconds after the flow begins to drip . Once properly rinsed, some agricultural plastic pesticide containers can be taken to a container collection site or picked up for recycling . To find the nearest site, contact your chemical dealer or Bayer at 1-800-768-6387 . If recycling is not available, dispose of in accordance with federal, state, and local regulations and procedures, which may include puncturing the properly rinsed container and disposing in a sanitary landfill . FOR ALL REFILLABLE CONTAINERS, EXCEPT TRANSPORT CONTAINERS : Refillable container . Refill this container with pesticide only . Do not reuse this container for any other purpose . Cleaning this container before refilling is the responsibility of the refiller . Cleaning this container before final disposal is the responsibility of the person disposing of the container . To clean this container before final disposal, empty the remaining contents from this container into application equipment or a tank mix . Fill the container about 10 percent full with water . Agitate vigorously or recirculate water with the pump for 2 minutes . Pour or pump rinsate into application equipment or rinsate collection system . Repeat this rinsing procedure two more times . Then offer this container for recycling, if available . To obtain information about recycling refillable containers, contact Bayer at 1-800-768-6837 . 5.0 PRODUCT INFORMA TION This product is recommended for control of yellow nutsedge and many annual grasses and broadleaf weeds listed in the “WEEDS CONTROLLED” section of this label . This product alone will not control emerged seedlings . This product may be applied either as a surface application before or after planting or after crop emergence . This product may also be shallowly incorporated prior to planting to blend the herbicide treatment into the upper 1 inch of soil . Except for minimum or conservation tillage systems, the seedbed should be fine, firm and free of clods and trash . Read and carefully observe cautionary statements and all other information appearing on the labeling of all products used in mixtures and sequential products . Use according to the most restrictive label directions for each product in the mixture . NOTE: Use this product for weed control in corn and grain sorghum only . CORN (ALL TYPES INCLUDING SWEET CORN), MILO (SORGHUM), SOYBEANS, WHEAT OR TOBACCO CAN BE PLANTED THE YEAR FOLLOWING THE USE OF THIS PRODUCT . IF SOYBEANS ARE TO BE PLANTED THE FOLLOWING YEAR, THERE IS THE POSSIBILITY OF CROP INJURY DUE TO CARRYOVER OF ATRAZINE . 7.125” 6.875” 6.495” COPY AREA COPY AREA 6.625”

3 SPRAY DRIFT MANAGEMENT Mandatory Spray Drift Management Ground Boom Applications • Apply with the nozzle height recommended by the manufacturer, but no more than 3 feet above the ground or crop canopy . • For all applications, applicators are required to use a coarse or coarser spray droplet size (ASABE S572) . • Do not apply when wind speeds exceed 10 miles per hour at the application site . • Do not apply during temperature inversions . • User must maintain a 15 foot (4 .6 meter) in-field downwind buffer (in the direction in which the wind is blowing) from the edge of streams and rivers, as well as high-tide line for all estuarine/marine environments . Boom-less Ground Applications: • Applicators are required to use a coarse or coarser droplet size (ASABE S572) for all applications . • Do not apply when wind speeds exceed 10 miles per hour at the application site . • Do not apply during temperature inversions . • User must maintain a 15 foot (4 .6 meter) in-field downwind buffer (in the direction in which the wind is blowing) from the edge of streams and rivers, as well as high-tide line for all estuarine/marine environments . Spray Drift Advisories • THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT . • BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS . • IMPORTANCE OF DROPLET SIZE An effective way to reduce spray drift is to apply large droplets . Use the largest droplets that provide target pest control . While applying larger droplets will reduce spray drift, the potential for drift will be greater if applications are made improperly or under unfavorable environmental conditions . Controlling Droplet Size - Ground Boom • Volume - Increasing the spray volume so that larger droplets are produced will reduce spray drift . Use the highest practical spray volume for the application . If a greater spray volume is needed, consider using a nozzle with a higher flow rate . • Pressure - Use the lowest spray pressure recommended for the nozzle to produce the target spray volume and droplet size . • Spray Nozzle - Use a spray nozzle that is designed for the intended application . Consider using nozzles designed to reduce drift . • BOOM HEIGHT - Ground Boom Use the lo west boom height that is compatible with the spray nozzles that will provide uniform coverage . For ground equipment, the boom should remain level with the crop and have minimal bounce . • SHIELDED SPRAYERS Shielding the boom or individual nozzles can r educe spray drift . Consider using shielded sprayers . Verify that the shields are not interfering with the uniform deposition of the spray on the target area . • TEMPERATURE AND HUMIDITY When making applications in hot and dr y conditions, use larger droplets to reduce effects of evaporation . • TEMPERATURE INVERSIONS Drift potential is high during a temperature inversion . Temperature inversions are characterized by increasing temperature with altitude and are common on nights with limited cloud cover and light to no wind . The presence of an inversion can be indicated by ground fog or by the movement of smoke from a ground source or an aircraft smoke generator . Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing . • WIND Drift potential gener ally increases with wind speed . AVOID APPLICATIONS DURING GUSTY WIND CONDITIONS . Applicators need to be familiar with local wind patterns and terrain that could affect spray drift . • Boom-less Ground Applications: Setting nozzles at the lo west effective height will help to reduce the potential for spray drift . DO NOT aerially apply this product unless otherwise directed by approved supplemental labeling in possession of the user at the time of application . 5.1 Use Restrictions Use on Miscanthus and other perennial bioenergy crops is prohibited . Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk Counties of New York State . Not for use in the states of Hawaii or Alaska, or in the U . S . territories (Puerto Rico, Guam, American Samoa, the U . S . Virgin Islands, and the North Mariana Islands) . This chemical demonstrates the properties and characteristics associated with chemicals detected in ground water . The use of this chemical in areas where soils are permeable, particularly where the ground water is shallow, may result in ground water contamination . On the following soil types, do not apply this product within 50 feet of any well where the depth to ground water is 30 feet or less: sands with less than 3 percent organic matter; loamy sands with less than 2 percent organic matter; or sandy loams with less than 1 percent organic matter . See the figure for additional clarification . Atrazine can travel (seep or leach) through soil and can enter ground water which may be used as drinking water . Atrazine has been found in ground water . Users are advised not to apply atrazine to sand and loamy sand soils where the water table (ground water) is close to the surface and where these soils are very permeable, i .e . , well drained . Your local agricultural agencies can provide further information on the type of soil in your area and the location of ground water . This product must not be mixed or loaded, or used within 50 feet of all wells, including abandoned wells, drainage wells, and sink holes . Operations that involve mixing, loading, rinsing, or washing of this product into or from pesticide handling or application equipment or containers within 50 feet of any well are prohibited unless conducted on an impervious pad constructed to withstand the weight of the heaviest load that may be positioned on or moved across the pad . Such a pad shall be designed and maintained to contain any product spill or equipment leaks, container or equipment rinse or washwater, and rain water that may fall on the pad . Surface water shall not be allowed to either flow over or from the pad, which means the pad must be self-contained . The pad shall be sloped to facilitate material removal . An unroofed pad shall be of sufficient capacity to contain at a minimum 110 percent of the capacity of the largest pesticide container or application equipment on the pad . A pad that is covered by a roof of sufficient size to completely exclude precipitation from contact with the pad shall have a minimum containment capacity of 100 percent of the capacity of the largest pesticide container or application equipment on the pad . Containment capacities as described above shall be maintained at all times . The above-specified minimum containment capacities do not apply to vehicles when delivering pesticide shipments to the mixing/ loading sites . States may have in effect additional requirements regarding well-head setbacks and operational area containment . This product must not be mixed or loaded within 50 feet of intermittent streams and rivers, natural or impounded lakes and reservoirs . This product must not be applied within 66 feet of the points where field surface water runoff enters perennial or intermittent streams and rivers or within 200 feet around natural or impounded lakes and reservoirs . If this product is applied to highly erodible land, the 66-foot buffer or setback from runoff entry points must be planted to crop, seeded with grass, or other suitable crop . Where there are state/local requirements regarding atrazine use (including lower maximum rates and/or higher setbacks), which are different from the label, the more restrictive/protective requirements apply . Do not flood irrigate to apply or incorporate this product . Product must be used in a manner that will prevent back siphoning into wells, spills or improper disposal of excess pesticide, spray mixtures or rinsates . Do not apply this product through any type of irrigation system, unless otherwise directed by approved supplemental labeling in possession of the user at the time of application . Disposal of excess pesticide, spray mixtures or rinsate should be according to label use instructions or according to the State Pesticide or Environmental Control Agency or the Hazardous Waste representative at the nearest EPA regional office . Do not apply under conditions that favor runoff or wind erosion of soil containing this product to non-target areas . To prevent off-site movement due to runoff or wind erosion: Avoid treating powdery dry or light sandy soils when conditions are favorable for wind erosion . Under these conditions, the soil surface should first be settled by rainfall or irrigation . Do not apply to impervious substrates such as paved or highly compacted surfaces or frozen or snow covered soils . Do not use tailwater from the first flood or furrow irrigation of treated fields to treat non-target crops unless at least 1/2 inch of rainfall has occurred between application and the first irrigation . Do not apply this product using aerial application equipment, unless otherwise directed by approved supplemental labeling in possession of the user at the time of application . Do not use mechanically pressurized handgun applications to sweet corn . Do not apply atrazine and propazine products to the same sorghum acre Use of this product not consistent with this label may result in injury to persons, animals or crops, or other unintended consequences . For field corn forage use, allow 60-day preharvest interval . 7.125” 6.875” 6.495” COPY AREA COPY AREA 6.625”

4 For grain sorghum forage use, allow 60-day preharvest interval . Flush sprayer with clean water after use . Do not rotate to crops other than soybeans, corn, milo (grain sorghum), wheat or tobacco . The maximum atrazine broadcast application rates for corn and grain sorghum: • If no atrazine was applied prior to corn or grain sorghum emergence, apply a maximum of 2 .0 pounds active ingredient per acre broadcast . If a postemergence treatment is required following an earlier herbicide application, the total atrazine applied may not exceed 2 .5 pounds active ingredient per acre per calendar year . • Apply a maximum of 2 .0 pounds active ingredient per acre as a single preemergence application on soils that are not highly erodible or on highly erodible soils (as defined by the Natural Resources Conservation Service) if at least 30 percent of the soil is covered with plant residues, or • Apply a maximum of 1 .6 pounds active ingredient per acre as a single preemergence application on highly erodible soils (as defined by the Natural Resources Conservation Service) if less than 30 percent of the surface is covered with plant residues; or 2 .0 pounds active ingredient per acre if only applied postemergence . When tank-mixing or sequentially applying, atrazine or products containing atrazine to corn or grain sorghum, the total pounds atrazine applied (pounds active ingredient per acre) must not exceed 2 .5 pounds active ingredient per year . 5.2 Tile-Outletted Terraced Fields Containing Standpipes To ensure protection of surface water from runoff through standpipes with tile- outlets in terraced fields, one of the following restrictions must be used in applying atrazine to the tile-terraced fields containing standpipes: 1 . Do not apply this product within 66 feet of standpipes in tile-outletted terraced fields . 2 . Apply this product to the entir e tile-outletted terraced field and immediately incorporate it to a depth of 2 to 3 inches in the entire field . 3 . Apply this product to the entir e tile-outletted terraced field under a no-till practice only when a high crop residue management practice is used . High crop residue management is described as a crop management practice where little or no crop residue is removed from the field during and after crop harvest . 6.0 WEED RESIST ANCE MANAGEMENT GROUP GROUP 5 15 HERBICIDE HERBICIDE ATRAZINE ACETOCHLOR For resistance management, please note that DEGREE XTRA HERBICIDE contains both a Group 5 Atrazine and a Group 15 Acetochlor herbicide . Any weed population may contain plants naturally resistant to Group 5 and/ or Group 15 herbicides . The resistant individuals may dominate the weed population if these herbicides are used repeatedly in the same fields . Appropriate resistance-management strategies should be followed . To delay herbicide resistance take one or more of the following steps: • Rotate the use of DEGREE XTRA HERBICIDE or other Group 5 or Group 15 herbicides within a growing season sequence or among growing seasons with different herbicide groups that control the same weeds in a field . • Use tank mixtures with herbicides from a different group if such use is permitted; where information on resistance in target weed species is available, use the less resistance-prone partner at a rate that will control the target weed(s) equally as well as the more resistance-prone partner . Consult your local extension service or certified crop advisor if you are unsure as to which active ingredient is currently less prone to resistance . • Adopt an integrated weed-management program for herbicide use that includes scouting and uses historical information related to herbicide use and crop rotation, and that considers tillage ( or other mechanical control methods), cultural ( e . g . , higher crop seeding rates; precision fertilizer application method and timing to favor the crop and not the weeds), biological (weed-competitive crops or varieties) and other management practices . • Scout after herbicide application to monitor weed populations for early signs of resistance development . Indicators of possible herbicide resistance include: (1) failure to control a weed species normally controlled by the herbicide at the dose applied, especially if control is achieved on adjacent weeds; (2) a spreading patch of non-controlled plants of a particular weed species; (3) surviving plants mixed with controlled individuals of the same species . If resistance is suspected, prevent weed seed production in the affected area by an alternative herbicide from a different group or by a mechanical method including hoeing or tillage . Prevent movement of resistant weed seeds to other fields by cleaning harvesting and tillage equipment when moving between fields, and planting clean seed . • If a weed pest population continues to progress after treatment with this product, discontinue use of this product, and switch to another management strategy or herbicide with a different mode of action, if available . • Contact your local extension specialist or certified crop advisors for additional pesticide resistance-management and/or integrated weed- management recommendations for specific crops and weed biotypes . • For further information or to report suspected resistance contact Bayer CropScience at 1-866-99BAYER (1-866-992-2937) . You can also contact your pesticide distributor or university extension specialist to report resistance . 7.0 SOIL TEXTURE Applicators should evaluate soil conditions carefully to assure that they choose the correct label rate . The recommended use rates of this product and the other herbicides labeled for use in tank mixtures with this product vary with soil texture . Unless soil texture is specifically named, rate tables throughout this label refer to only three soil textural groups: coarse, medium and fine . The following is a complete listing of soil textures included in each of these three soil textural groups: SOIL TEXTURAL GROUP SOIL TEXTURE COARSE sand, loamy sand, sandy loam MEDIUM loam, silt loam, silt, sandy clay loam FINE silty clay loam, clay loam, sandy clay, silty clay, clay Refer to the above table to determine the corresponding soil textural group for the soil to be treated . 8.0 MIXING, SPRAYING AND HANDLING INSTRUCTIONS NOTE: Direct contact or exposure to this product or spray mixtures of this product should be minimized . The following instructions for transfer, mixing, cleaning or repairing equipment should be followed in order to minimize this exposure . Review the protective clothing requirements as listed in the “PRECAUTIONARY STATEMENTS” section of this label and do not use this product until you have the necessary protective clothing . 2.5 Gallon Containers Open pouring from these containers can result in exposure from splashing or spilling . Special care in lifting and pouring is strongly recommended . Bulk Containers Open pouring from these containers can result in exposure from splashing or spilling and is not recommended . This product should be transferred from these containers to the mix or spray tank using pumps or transfer probes . The probe or pump should not be removed from the container or disconnected until the container is emptied or rinsed . Use the pump or probe system to rinse the empty container and transfer the rinsate directly to the mix or spray tank . 8.1 Equipment Cleaning and Repair Cleaning and repair of transfer systems and application equipment is a source of exposure to this product . Care should be taken to minimize exposure during cleaning and repair to transfer systems application equipment . Whenever possible, these systems or equipment should be rinsed before being cleaned or repaired . When repairs must be made during transfer or application, the equipment should be shut down, and special care taken to avoid contact with the pesticide . 8.2 Sprayer Compatibility Always predetermine the compatibility of this product or labeled mixtures of this product with water carrier or sprayable fluid fertilizer carrier by mixing small proportional quantities in advance . See the “STANDARD SPRAYABLE FLUID FERTILIZER COMPATIBILITY TEST” section in this label to determine the compatibility of this product and the labeled tank mixtures recommended for use with sprayable fluid fertilizer carrier . Mix this product or labeled tank mixtures of this product with the appropriate carrier as follows: 1 . Place a 20- to 35-mesh scr een or wetting basket over filling port . 2 . Through the scr een, fill the sprayer tank one-half full with appropriate carrier . 3 . If a compatibility agent is necessar y to improve mixing or to prevent the formation of undesirable and unsprayable gels or precipitates, while agitating add it to the carrier already in the tank . Use only compatibility agents cleared by FDA for this use . Read and follow all directions for use, cautionary statements and all other information appearing on the selected compatibility agent label . Check for adequate agitation . 4 . If a wettable po wder or dry flowable formulation is used, make a slurry with water, and add it slowly through the screen into the tank . Continue agitation . 5 . If a flo wable formulation is used, add slowly through screen into the tank . Mixing and compatibility may be improved when flowable is premixed one part flowable with one part water and added slowly to the tank in diluted form . 6 . Add this product slo wly through the screen into the tank . Mixing and compatibility may be improved when this product is prediluted with two parts of water and added to the tank in diluted form . 7 . Complete filling the spr ayer tank with carrier . If a Roundup ® agricultural herbicide or Gramoxone TM brand herbicide is used, add the required amount near the end of the filling process . Remove hose from tank immediately after filling to avoid siphoning back into the water source . Maintain good agitation at all times until the contents of the tank are sprayed . NOTE: If spray mixture is allowed to settle at any time, thorough agitation is required to resuspend the mixture before spraying is resumed . Keep bypass line on or near bottom of tank to minimize foaming . Screen size in nozzle or line strainers should be no finer than 50-mesh . Carefully select proper nozzle to avoid spraying a fine mist . Check for even distribution of spray droplets . For best results with ground application, use flat-fan or whirl-chamber nozzle . To reduce loss of chemical due to drift of a fine mist, apply at pressures less than 40 psi . 8.3 Standard Sprayable Fluid Fertilizer Compatibility T est Herbicides may not always mix evenly throughout a sprayable fluid fertilizer or the components may separate too quickly to make their combined use of practical value . This may be due to certain characteristics of the different fluid fertilizers . A simple test using small quantities of the components is suggested to provide compatibility potential . The test follows: A. Materials Required For A Compatibility Test 1 . T wo one-quart jars with lid or stopper (marked “with” and “without”) . 2 . TEAspoons (for a mor e exacting test, a five to ten milliliter (mL) pipette or graduated cylinder is desirable) . 3 . Spr ayable fluid fertilizer to be tested . 4 . The herbicide c hemicals to be mixed . 5 . A compatibility agent (the purpose of the adjuv ant is to help keep the fertilizer and crop protection chemical in suspension, if this assistance is needed) . 7.125” 6.875” 6.495” COPY AREA COPY AREA 6.625”

5 B. Procedure 1 . Add one pint of the spr ayable fluid fertilizer that will be used or other herbicide carrier to each jar marked “with” and “without” . Add One Pint Liquid Fertilizer To Two Quart Jars 2 . T o the jar marked “with”, add 1/4 TEAspoon or 1 . 2 milliliters of a suitable compatibility agent; shake gently for five to ten seconds to mix . (1/4 TEAspoon in one pint is the equivalent of two pints per 100 gallons of liquid fertilizer . ) To Jar Marked “WITH” Add Compatibility Agent And Shake To Mix 3 . T o each jar add the appropriate amount of herbicide(s) . If more than one is used, add them separately with the wettable powders or dry flowables added first, flowables second and liquid last . Shake gently five to ten seconds after each addition . Add Herbicide(s) To Both Jars and Shake to Mix Amount to be Added per Pint of Sprayable Fluid Fertilizer (Assuming Volume is 25 Gallons/Acre) HERBICIDE RATE/ACRE Level TEAspoons Wettable 1 pound = 1 .5 Powders 2 pounds = 3 .0 or 3 pounds = 4 .5 Dry Flowables 4 pounds = 6 .0 5 pounds = 7 .5 HERBICIDE RATE/ACRE Level TEAspoons Milliliters Emulsifiable 1 pint = 0 .5 or 2 .4 Concentrates or 1 quart = 1 .0 or 4 .7 Flowables or 2 quarts = 2 .0 or 9 .5 Liquids or 3 quarts = 3 .0 or 14 .2 Solutions 1 gallon = 4 .0 or 19 .0 5 quarts = 5 .0 or 23 .8 This compatibility test is designed for 25 gallons of spray per acre with the maximum labeled rate of herbicide . For changes in spray volume or herbicide rate, make appropriate changes in the ingredients of the test . Regardless of spray volume, the amount of compatibility agent should be equal to two or three pints (two pints = 1/4 TEAspoon or 1 .2 milliliters, three pints = 3/8 TEAspoon or 1 .8 milliliters per pint of sprayable fluid fertilizer) per 100 gallons of liquid fertilizer . C. Obser vations and Decisions 1 . If the herbicide(s) and the spr ayable fluid fertilizer are compatible . 2 . If a compatibility agent is necessar y . Five minutes after the final addition and mixing, observe both jars for the formation of large flakes, sludge, gels or other precipitates . Observe if the herbicide(s) cannot be physically mixed with the liquid fertilizer but remains as small oily particles in the solution . If incompatibility in any form described above occurs in the jar “with” the compatibility agent added, the liquid fertilizer and the herbicide(s) should not be used together in the same spray tank . If incompatibility as described above occurs in the jar “without” the adjuvant but not in the jar “with” adjuvant, the use of a compatibility adjuvant is recommended . Both jars should be allowed to stand and be observed periodically for one-half hour . If the separate layers of liquid fertilizer and additives can be resuspended by shaking, commercial application is possible . An emulsifiable concentrate normally will go to the top after standing; wettable powders will either settle to the bottom of the tank or jar, or float to the top, depending upon the density of the fertilizers . If the herbicide(s) is compatible with fluid fertilizer in the foregoing test without having to use a compatibility agent, fluid fertilizer may be used for the premixing . If it is not compatible without the compatibility agent, the herbicide(s) should be premixed with water before adding to the spray tank . 9.0 APPLIC ATION SYSTEMS 9.1 Ground Broadcast Treatment Apply this product and the labeled tank mixtures in 10 or more gallons of solution per acre using broadcast boom equipment . The carrier may be either water or sprayable fluid fertilizer as specified for the crop to be treated in the “DIRECTIONS FOR USE” section of this label . 9.2 Ground Band Treatment Apply a broadcast equivalent rate and volume per acre . To determine these: Band width in inches X Broadcast RATE per acre = Band RATE per acreRow width in inches Band width in inches X Broadcast VOLUME per acre = Band VOLUME per acreRow width in inches 10.0 APPLIC ATION TIMING AND METHODS 10.1 Early Preplant Surface Application This product and some labeled tank mixtures of this product may be applied in no-till and other conservation tillage systems before weeds emerge and up to 45 days before planting field corn or silage corn . Split applications can be made 30 to 45 days prior to planting with 60 percent of the recommended broadcast rate applied initially and the remaining 40 percent applied at planting . Applications made less than 30 days prior to planting can be made either as a split or as a single application . If weeds are present at the time of application, apply this product in tank mixture with an appropriate contact herbicide . Observe directions for use, precautions and restrictions on the label of the contact herbicide . During the planting operation, be careful not to move untreated soil to the surface or move treated soil out of the row, as weed control may be reduced . 10.2 Preplant Incorporation Application This product and many of the labeled tank mixtures may be mixed into the upper 1-inch of soil using shallow incorporation equipment any time within 14 days prior to planting . Apply the recommended treatment rate to the soil surface as a broadcast application . Either existing soil moisture or subsequent precipitation or irrigation is required to bring incorporated herbicide treatments into contact with germinating weed seedlings . Irrigation within 10 days following application may improve weed control . If weeds emerge after treatment, rotary hoe or shallowly cultivate immediately to improve performance but only cultivate if rainfall or irrigation does not occur within 10 to 14 days after application . 10.3 Preemergence Surface Application This product and all labeled tank mixtures may be applied to the soil surface after planting and prior to either crop or weed emergence . Apply within 5 days of last preplant tillage . If weeds emerge after treatment, or if treatment is applied more than 5 days after last preplant tillage, rotary hoe or shallowly cultivate immediately to improve performance . Precipitation or overhead sprinkler irrigation is required after application to move the herbicide treatment into the weed germination zone . The amount of precipitation or overhead sprinkler irrigation required depends on existing soil mixture, soil type and percent organic matter content, but 1/2 to 3/4 inch is normally adequate . Performance is improved when moisture is received within 7 days after application and prior to weed emergence . High intensity or excessive rainfall or excessive irrigation after application may reduce control . 10.4 Postemergence Surface Application This product and certain tank mixtures may be applied postemergence until corn reaches 11 inches in height or grain sorghum reaches 11 inches (5 to 6 leaf stage) in height . Application must be made prior to weed seedling emergence or in a tank mixture that controls emerged weeds . Read and follow all restrictions and directions on tank mix product labels . Refer to the specific treatment intended in the “DIRECTIONS FOR USE” section of the label to determine if postemergence applications to corn or grain sorghum are recommended and determine the proper weed and crop growth stage limitations . Precipitation or overhead sprinkler irrigation is required after application to move the herbicide treatment into the weed germination zone to control weeds that have not emerged . The amount of precipitation or irrigation required depends on existing soil moisture, soil type and percent organic matter content, but 1/2 to 3/4 inch is normally adequate . If weeds emerge after treatment, rotary hoe or shallowly cultivate to improve performance . Do not apply postemergence to sweet corn . NOTE: Postemergence application of this product in liquid fertilizer carriers can result in crop injury . Some leaf burn may occur on corn . DO NOT apply if air temperatures are expected to reach 85 degrees F within 24 hours after application . Surfactants, crop oil or other additives are not recommended unless specified in the tank mix instructions . If applying postemergence in liquid fertilizer carriers, APPLY TO FIELD CORN ONLY . 10.5 Cultivation Information Delay cultivation after application for as long as possible unless weeds or grasses emerge . Shallowly cultivate or rotary hoe immediately if weeds or grasses emerge . If cultivation is necessary because of soil crusting or compaction, set equipment shallow and minimize lateral soil movement to avoid dilution or displacement of the herbicide treatment . If a band application is used and weeds have emerged in the treated band, set cultivator to throw soil into the row covering the band . 11.0 WEEDS CONTROLLED When applied as directed under conditions described, this product alone will CONTROL the following weeds: 7.125” 6.875” 6.495” COPY AREA COPY AREA 6.625”

6 11.1 Annual Grasses Controlled Barnyardgrass Echinochloa crus-galli Crabgrass Digitaria ischaemum Digitaria sanguinalis Cupgrass, woolly* Eriochloa villosa Foxtail, giant Setaria faberi Foxtail; green, robust purple, robust white Setaria viridis Foxtail, yellow Setaria lutescens Goosegrass Eleusine indica Oat, wild A vena fatua Panicum, browntop Panicum fasciculatum Panicum, fall Panicum dichotomiflorum Rice, red Oryza sativa Signalgrass, broadleaf Br achiaria platyphylla Sprangletop, red Leptoc hloa filiformis Wheat, volunteer Triticum aestivum Witchgrass Panicum capillar e

Apply 4 .4 quarts of this product per acre to control this weed in corn . Apply 3 .7 quarts of this product per acre to control this weed in grain sorghum . Control of these weeds can be erratic especially under dry weather conditions . Control escaped weeds with cultivation or application of an appropriate EPA-registered postemergence herbicide . 11.2 Annual Broadleaves Controlled Beggarweed, Florida Desmodium tortuosum Carpetweed Mollugo verticillata Cocklebur* Xanthium strumarium Galinsoga Galinsoga spp . Groundcherry, annual Physalis spp. Groundcherry, cutleaf Physalis angulata Henbit Lamium amplexicaule Jimsonweed Datura stramonium Kochia** Kochia scoparia Lambsquarters Chenopodium album Morningglory, annual* Ipomoea purpurea Mustard Brassica spp. Nightshade, black Solanum nig rum Nightshade, hairy Solanum sarrachoides Pigweed; Carelessweed Amaranthus spp. Purslane Portulaca oleracea Pusley, Florida Richardia scabra Ragweed, common Ambrosia artemisiifolia Sida, prickly; Teaweed Sida spinosa Smartweed Polygonum pensylv anicum Polygonum persicaria Velvetleaf; Buttonweed* Abutilon theophr asti Waterhemp Amar anthus tuberculatus
Use the higher rate in the application rate range within each Application Rate table . Control of these weeds can be erratic especially under dry weather conditions . Control escaped weeds with cultivation or application of an appropriate EPA-registered postemergence herbicide . ** Triazine-resistant biotypes may require a post sequential application of a non-triazine herbicide for control . SEDGE Nutsedge, yellow* Cyperus esculentus
Preplant incorporate for control . 11.3 Annual Grasses Partially Controlled When applied immediately after planting or within 5 days of last tillage, this product at a rate of 3 .6 to 4 .4 quarts per acre in corn on a broadcast basis will reduce competition from the following HARD-TO-CONTROL weeds . Johnsongrass, seedling Sorghum halepense Millet, proso Panicum miliaceum Panicum, Texas Panicum texanum Sandbur, field Cenchrus incertus Shattercane; Wildcane Sor ghum bicolor 11.4 Annual Broadleaves Partially Controlled Ragweed, giant Sunflower, common Ambrosia trifida Helianthus annuus Sicklepod Cassia obtusifolia NOTE: For hard-to-control weeds, additional amounts of Harness ® herbicide (IN CORN ONLY) and/or atrazine may be added to the recommended treatment rates for this product to provide improved control . For more consistent control of common cocklebur, annual morning glory or velvetleaf, additional atrazine may be applied so that the total atrazine rate is at least 1 .5 quarts per acre on medium-textured soil with less than 3 percent organic matter, and 1 .5 to 2 quarts on medium- and fine-textured soils with 3 percent or greater organic matter content . For more consistent control of woolly cupgrass additional Harness herbicide may be applied (IN CORN ONLY) so that the total acetochlor rate is 3 .0 pounds per acre . The following table shows the amounts of Harness herbicide and/or atrazine that can be added to specific treatment rates of this product . The maximum atrazine broadcast application rates for corn or grain sorghum: • If no atr azine was applied prior to corn or grain sorghum emergence, apply a maximum of 2 pounds active ingredient per acre broadcast . If a postemergence treatment is required following an earlier herbicide application, the total atrazine applied may not exceed 2 .5 pounds active ingredient per acre per calendar year . • 2 . 0 pounds active ingredient per acre as a single preemergence application on soils that are not highly erodible or on highly erodible soils (as defined by the Natural Resources Conservation Service) if at least 30 percent of the soil is covered with plant residues, or • 1 . 6 pounds active ingredient per acre as a single preemergence application on highly erodible soils (as defined by the Natural Resources Conservation Service) if less than 30 percent of the surface is covered with plant residues; or 2 .0 pounds active ingredient per acre if only applied postemergence . Do not use more than 4 .4 quarts of this product per acre in corn per calendar year . Do not use more than 3 .7 quarts of this product per acre in grain sorghum per calendar year . APPLICATION RATE PRODUCT ADDITION (CORN ONLY) (maximum rate) DEGREE XTRA HERBICIDE (quarts) HARNESS (pints) ATRAZINE (quarts) 2 .4 1 .6 1 .2 2 .9 1 .2 1 .0 3 .2 0 .9 0 .9 12.0 CORN CONSERV ATION OR MINIMUM TILLAGE SYSTEMS NOTE: Each section of this label provides recommended treatment rates for this product and tank mixtures including this product . Applications, which are not consistent with recommendations in this label, may result in unsatisfactory weed control, injury to crops, persons or animals, or other unintended consequences . Refer to specific product labels for crop rotation restrictions and cautionary statements of all products used in these tank mixtures, including precautions on soil pH sensitive varieties, minimum re-cropping interval and rotational guidelines . Use the higher rates in the application rate ranges in areas of heavy weed infestation or where otherwise specified . If emerged weeds exist at planting, the application of a contact herbicide or tillage is recommended when possible to eliminate existing weeds . Do not apply when conditions favor drift . When making applications to corn, do not exceed a total of 4 .4 quarts per acre of this product per year . Detailed information regarding “APPLICATION SYSTEMS” and “APPLICATION TIMING AND METHODS” should be carefully reviewed in conjunction with the information in this section . If the specific information in this section differs from the “PRODUCT INFORMATION”, the specific information should control . 12.1 At-Planting Applications The tank mix recommendations in the “CONVENTIONAL TILLAGE SECTION” of this label may also be followed when using “CONSERVATION OR MINIMUM TILLAGE SYSTEMS” . Follow all label precautions, directions and restrictions of tank-mix partners . When applied as directed under the conditions described, the recommended tank mixtures control many emerged annual weeds, suppress many emerged perennial weeds and give preemergence control of many annual grasses and broadleaf weeds when corn will be planted directly into a cover crop, established sod or in previous crop residues . These tank mixtures will not control regrowth from perennial weeds . Refer to specific product labels for crop rotation restrictions and cautionary statements of all products used in these tank mixtures . For mixing instructions, see the “MIXING, SPRAYING AND HANDLING” section of this label . DEGREE XTRA HERBICIDE herbicide and tank mixtures with Princep™ or Pursuit can be tank mixed with a Roundup agricultural herbicide, Gramoxone brand herbicide and/or 2,4-D . See detailed instructions for tank mixes with Princep or Pursuit in Section 12 . Apply the recommended tank mixtures with a Roundup agricultural herbicide or 2,4-D (amine or low volatile ester) in 10 to 20 gallons of water or 10 to 60 gallons of nitrogen solution per acre, or the tank mixtures with Gramoxone brand herbicide in 20 to 60 gallons of water or clear liquid fertilizer per acre immediately before, during or after planting, but BEFORE CROP EMERGENCE . As density of stubble, crop residue or weeds increase, spray gallonage and rate should be increased within the application rate ranges to ensure complete coverage . In the absence of emerged vegetation, delete the Roundup agricultural herbicide, Gramoxone or 2,4-D portion of these tank mixtures . 12.2 Control or Suppression of Emerged Weeds ATTENTION: AVOID DRIFT—EXTREME CARE MUST BE USED WHEN APPLYING THESE TANK MIXTURES TO PREVENT INJURY TO DESIRABLE PLANTS AND CROPS . Do not allow spray mist to drift since even minute quantities of spray can cause severe damage or destruction to nearby crops, plants or other areas on which treatment is not intended . Do not apply when winds are gusty or in excess of 5 miles per hour or when other conditions, including lesser wind velocities, will allow drift to occur . When spraying, avoid combinations of pressure and nozzle type that will result in fine particles (mist) which are more likely to drift . 7.125” 6.875” 6.495” COPY AREA COPY AREA 6.625”

7 12.2.1 Roundup Agricultural Herbicides Annual Weeds Apply a Roundup agricultural herbicide in these tank mixtures at the proper rate for the weed per the label instructions . Perennial Weeds At normal application rates in minimum tillage systems, perennial weeds may not be at the proper stage of growth for control . Use of full labeled rates of Roundup agricultural herbicides, in the mixtures above and under these conditions will provide top kill and reduce competition from emerged perennial grasses and broadleaf weeds . USE OF THIS MIXTURE FOR BERMUDAGRASS OR JOHNSONGRASS CONTROL IS NOT RECOMMENDED . NOTE: When using these tank mixtures, do not exceed labeled maximum rates . Ammonium Sulfate The addition of ammonium sulfate in the spray solution may increase the performance of Roundup agricultural herbicide tank mixtures on emerged annual weeds under adverse growing conditions . When using ammonium sulfate, add 2 percent dry ammonium sulfate by weight or 17 pounds per 100 gallons of water . Ammonium sulfate should be added to the water in the spray tank and completely dissolved prior to adding the herbicide or surfactant . Do not mix ammonium sulfate in fluid fertilizer solutions . The equivalent rate of ammonium sulfate in a liquid formulation may also be used . If ammonium sulfate is added directly to the spray tank, add slowly with agitation . Adding too quickly may clog outlet lines . Nozzle tip plugging may result from the use of low quality ammonium sulfate . To determine quality, perform a jar test by adding 1/3 cup of ammonium sulfate to 1 gallon of water and agitate for one minute . If undissolved sediment is observed, predissolve the ammonium sulfate in water and filter prior to adding to the spray tank . Surfactants Nonionic surfactants that are labeled for use with herbicides may be used with some Roundup agricultural herbicides, check specific label for restrictions . Do not reduce rates of Roundup agricultural herbicides when adding surfactant . Use 0 .5 percent surfactant concentration (2 quarts per 100 gallons of spray solution) when using surfactants that contain at least 50 percent active ingredient or a 1 percent surfactant concentration (4 quarts per 100 gallons of spray solution) for those surfactants containing less than 50 percent active ingredient . Read and carefully observe surfactant cautionary statements and other information appearing on the surfactant label . 12.2.2 Gramoxone Brand Herbicides When used as directed, Gramoxone brand herbicides in a labeled tank mixture control many emerged annual weeds and suppresses many emerged perennial weeds . Broadcast Treatment Apply Gramoxone brand herbicides in these tank mixtures immediately before, during or after planting but BEFORE CROP EMERGENCE . As density of stubble, crop residue or weeds increase, spray gallonage should be increased within the application rate range for complete coverage . Add a nonionic spreader surfactant (approved for use on crops) containing at least 75 percent surfactant active agent at 8 ounces per 100 gallons of diluted spray . REFER TO THE SPECIFIC GRAMOXONE BRAND HERBICIDE LABEL FOR PRECAUTIONARY STATEMENTS . 12.2.3 2,4-D When used as directed, 2,4-D in labeled tank mixtures controls many emerged annual and perennial broadleaf weeds . For emerged weeds controlled, see the “WEEDS CONTROLLED” section of the label for 2,4-D . Broadcast Treatment Apply 1 to 2 pints of 2,4-D (amine or low volatile ester) in the recommended tank mixtures . Applications should be made 7 to 14 days before planting or 3 to 5 days after planting but BEFORE CORN EMERGES . As density of stubble, crop residue or weeds increase, spray gallonage should be increased within the application rate range for complete coverage . DO NOT use 2,4-D on light, sandy soils, or where soil moisture is inadequate for normal weed growth . Observe all precautions and limitations on the 2,4-D label booklet . 12.3 Early Preplant Application If emerged weeds are present at the time of treatment, a Roundup agricultural herbicide, Gramoxone brand herbicide or 2,4-D should be added to this product according to the directions for use on their respective product labels . If unsatisfactory weed control occurs (due to excessively dry or excessively wet conditions) following the earlier application, a postemergence application of an appropriate labeled grass and/or broadleaf weed herbicide may be used . If a postemergence treatment includes the herbicide used early preplant, do not exceed the labeled rate for corn on a given soil texture . 12.3.1 DEGREE XTRA HERBICIDE This product, when applied in a single application will provide preemergence control or reduced competition of the annual grasses and broadleaf weeds listed in the “WEEDS CONTROLLED” section of this label . If weeds are emerged at time of application, apply a labeled contact herbicide with this product . Observe the directions for use, precautions and restrictions on the label of the contact herbicide . Approved Application Systems Ground: Broadcast boom Approved Application Methods Single application Application of this product should be made less than 30 days before planting but prior to weed emergence . NOTE: Applications on coarse soils should not be made more than two weeks prior to planting . Application Rates SOIL TEXTURAL GROUP Broadcast Rate Per Acre DEGREE XTRA HERBICIDE* (quarts) Coarse 2 .9 Medium 2 .9 to 3 .7 Fine 3 .2 to 3 .7

In ar eas of heavy weed infestation use up to 4 .3 quarts per acre on medium- and fine-textured soils . In order to provide broad-spectrum weed control, single applications of this product must be followed with a planned postemergence application of a labeled broadleaf and/or grass herbicide . Observe the directions for use, precautions and restrictions on the label of the postemergence herbicide before use of these products . If emerged weeds exist at planting, the application of a contact herbicide or tillage is recommended when possible to eliminate existing weeds . Sequential application Application of this product in corn following Princep should be utilized for the control of fall panicum, crabgrass or broadleaf signalgrass . Apply 1 .0 to 1 .25 quarts per acre of Princep prior to weed emergence and no more than 45 days prior to planting . At or immediately following planting, but before crop emergence, apply the product . Application Rates SOIL TEXTURAL GROUP Broadcast Rate Per Acre DEGREE XTRA HERBICIDE* (quarts) Coarse 2 .9 Medium 2 .9 to 3 .7 Fine 3 .2 to 3 .7 In areas of heavy weed infestation use up to 4 .3 quarts per acre on medium- and fine-textured soils . When using the Princep ® Caliber 90® formulation use equivalent rates . One quart of Princep 4L equals 1 .1 pounds of Princep Caliber 90 . NOTE: LAND TREATED WITH PRINCEP SHOULD NOT BE PLANTED TO ANY CROP OTHER THAN CORN FOR ONE YEAR FOLLOWING TREATMENT AS CROP INJURY MAY OCCUR . AFTER HARVEST OF TREATED CROP , PLOW AND THOROUGHLY TILL THE SOIL IN THE FALL OR SPRING TO MINIMIZE POSSIBLE INJURY TO SPRING SEEDED ROTATIONAL CROPS . 13.0 CORN CONVENTIONAL TILLAGE SY STEMS NOTE: Each section of this label provides recommended treatment rates for this product and tank mixtures including this product . Applications, which are not consistent with recommendations in this label, may result in unsatisfactory weed control, injury to crops, persons or animals, or other unintended consequences . Refer to specific product labels for crop rotation restrictions and cautionary statements of all products used in these tank mixtures, including precautions on soil pH sensitive varieties, minimum re-cropping interval and rotational guidelines . Use the higher rates in the application rate ranges in areas of heavy weed infestation or where otherwise specified . If emerged weeds exist at planting, the application of a contact herbicide or tillage is recommended when possible to eliminate existing weeds . Do not apply when conditions favor drift . When making applications to corn, do not exceed a total of 4 .4 quarts per acre of this product per year . Detailed information regarding “APPLICATION SYSTEMS” and “APPLICATION TIMING AND METHODS” should be carefully reviewed in conjunction with the information in this section . If the specific information in this section differs from the “PRODUCT INFORMATION”, the specific information should control . 13.1 DEGREE XTRA HERBICIDE Apply this product in water or sprayable fluid fertilizer solution for control of yellow nutsedge and the annual grasses and broadleaf weeds listed in the “WEEDS CONTROLLED” section of this label . Approved Application Systems Ground: Broadcast boom; banded Approved Application Methods Preplant Incorporated, Preemergence Surface, Postemergence Surface Application Rates SOIL TEXTURAL GROUP Broadcast Rate Per Acre DEGREE XTRA HERBICIDE (quarts) Coarse 2 .9 Medium 2 .9 to 3 .7 Fine 3 .2 to 3 .7
In ar eas of heavy weed infestation use up to 4 .3 quarts per acre on medium- and fine-textured soils . 13.2 DEGREE XTRA HERBICIDE Plus Roundup Agricultural Herbicides Postemergence on Corn containing Roundup Ready® Corn 2 Technology This program may be used preemergence and postemergence to corn containing Roundup Ready 2 Technology including Roundup Ready Corn 2 until the corn reaches 11 inches in height . Refer to the Roundup WeatherMAX and Roundup agricultural herbicide labels for specific weeds controlled postemergence . AVOID DRIFT . EXTREME CARE MUST BE USED WHEN APPLYING THIS PRODUCT TO PREVENT INJURY TO DESIRABLE PLANTS AND CROPS WHICH DO NOT CONTAIN THE ROUNDUP READY GENE . Approved Application Systems Ground: Broadcast boom Approved Application Methods Preemergence Surface 7.125” 6.875” 6.495” COPY AREA COPY AREA 6.625”

8 Sequential Program This product may be applied preemergence to corn containing Roundup Ready 2 Technology including Roundup Ready Corn 2 at the Roundup Ready® Rate of 2 quarts per acre in a planned preemergence followed by Roundup agricultural herbicide postemergence sequential program Postemergence Surface This product may be applied postemergence to corn containing Roundup Ready 2 Technology including Roundup Ready Corn 2 from seedling emergence until the corn is 11 inches in height at the Roundup Ready® Rate of 2 quarts per acre . Labeled use rates for this tank-mix with Roundup agricultural herbicides are defined in the table below . Use the higher rate on larger weeds and where heavy weed infestations exist . This tank mix should be applied when weeds are 2 to 4 inches in height and before the weed height and/or density become competitive with the crop . For difficult to control weeds such as fall panicum, barnyardgrass, crabgrass, shattercane, broadleaf signalgrass and Pennsylvania smartweed use the higher rate of Roundup agricultural herbicides . For mixing instructions, see the “MIXING, SPRAYING AND HANDLING” section of this label . Roundup Ready® Rate – DEGREE XTRA HERBICIDE at 2.0 quarts per acre Application Rates (minimum and maximum range) SOIL TEXTURAL GROUP Broadcast Rate Per Acre DEGREE XTRA HERBICIDE (quarts) Coarse 1 .5 to 2 .9 Medium 1 .5 to 3 .7 Fine 1 .5 to 3 .7

May use up to 32 ounces per acre on Roundup Ready Corn 2 . 14.0 TANK-MIXTURES 14.1 DEGREE XTRA HERBICIDE Tank-Mixtures for Preemergence Use in Corn This product may be tank-mixed with the following products for preemergence use in corn . Ensure that the specific product being used in the tank mixture is registered for application preemergence to corn . Read and follow label directions of all products in the tank mixture . The most restrictive; label directions apply . 2,4-D, atrazine, carfentrazone-ethyl, clopyralid, dicamba, diflufenzopyr, flumetsulam, flumiclorac pentyl ester, glyphosate, isoxaflutole, linuron, mesotrione, 14.2 DEGREE XTRA HERBICIDE Tank-Mixtures for Postemergence Use in Corn This product may be tank-mixed with the following products for postemergence use in corn . Ensure that the specific product being used in the tank mixture is registered for application postemergence (in-crop) to corn . Read and follow label directions of all products in the tank mixture . The most restrictive label directions apply . 2,4-D, atrazine, carfentrazone-ethyl, clopyralid, dicamba, diflufenzopyr, flumetsulam, flumiclorac pentyl ester, glyphosate, mesotrione, topramezone 15.0 GRAIN SORGHUM (MILO) Do not apply atrazine and propazine products to the same sorghum acre. NOTE: Each section of this label provides recommended treatment rates for this product and tank mixtures including this product . Applications, which are not consistent with recommendations in this label, may result in unsatisfactory weed control, injury to crops, persons or animals, or other unintended consequences . Refer to specific product labels for crop rotation restrictions and cautionary statements of all products used in these tank mixtures, including precautions on soil pH sensitive varieties, minimum re-cropping interval and rotational guidelines . Use the higher rates in the application rate ranges in areas of heavy weed infestation or where otherwise specified . If emerged weeds exist at planting, the application of a contact herbicide or tillage is recommended when possible to eliminate existing weeds . Do not apply when conditions favor drift . Detailed information regarding “APPLICATION SYSTEMS” and “APPLICATION TIMING AND METHODS” should be carefully reviewed in conjunction with the information in this section . If the specific information in this section differs from the “PRODUCT INFORMATION”, the specific information should control . This product, when applied in a single application will provide preemergence control or reduced competition of the annual grasses and broadleaf weeds listed in the “WEEDS CONTROLLED” section of this label . If weeds are emerged at time of application, apply a labeled contact herbicide with this product . Observe the directions for use, precautions and restrictions on the label of the contact herbicide . Preplant incorporated and preemergence surface applications of this product must be made ONLY to grain sorghum planted with seed that has been properly treated with seed protectant or safener . Rates from the table below should be based on the soil texture and the tolerance of the sorghum hybrid . When making applications to grain sorghum, do not exceed a total of 3 .7 quarts per acre of this product per year . If there has been a previous application of a product containing atrazine, do not exceed a total of 2 .5 pounds of atrazine active ingredient per acre per calendar year . NOTE: In Texas, use only in the Panhandle area and the fine-textured soils of the Gulf Coast and the Blacklands . In the Texas Panhandle and Oklahoma Panhandle, apply this product as a preemergence surface application only . In the Texas Panhandle, Oklahoma Panhandle and the fine-textured soils of the Gulf Coast and the Blacklands of Texas, do not exceed 3 .5 quarts of this product per acre as crop injury may result due to atrazine . Applications made to grain sorghum growing on alkali soils or where cuts, fills or erosion have exposed calcareous or alkali subsoils may result in crop injury . Approved Application Systems Ground: Broadcast boom, banded Approved Application Methods Preplant Incorporated; Preemergence Surface; Postemergence Surface Postemergence Surface: Apply this product postemergence to grain sorghum before the crop exceeds 11 inches in height (in general, 5 to 6 leaf gain sorghum) . Application Rates SOIL TEXTURAL GROUP Broadcast Rate Per Acre DEGREE XTRA HERBICIDE* (quarts) Less than 1 .5% organic matter DEGREE XTRA HERBICIDE* (quarts) 1 .5% or more organic matter Coarse** 2 .0 to 2 .5 2 .3 to 2 .9 Medium 2 .0 to 2 .5 2 .3 to 3 .7 Fine 2 .0 to 2 .9 2 .5 to 3 .7
Use the higher rate in the range for areas of heavy weed infestation . ** Do not use this product for preplant incorporation in coarse or medium soils . 16.0 LIMIT OF W ARRANTY AND LIABILITY This Company warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes set forth in the Complete Directions for Use label booklet (“Directions”) when used in accordance with those Directions under the conditions described therein . TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, NO OTHER EXPRESS WARRANTY OR IMPLIED WARRANTY OF FITNESS FOR PARTICULAR PURPOSE OR MERCHANTABILITY IS MADE . This warranty is also subject to the conditions and limitations stated herein . To the extent consistent with applicable law, buyer and all users shall promptly notify this Company of any claims whether based in contract, negligence, strict liability, other tort or otherwise . Buyer and users are responsible for all loss or damage from use or handling which results from conditions beyond the control of this Company to the extent consistent with applicable law, including, but not limited to, incompatibility with products other than those set forth in the Directions, unusual weather, weather conditions which are outside the range considered normal at the application site and for the time period when the product is applied, as well as weather conditions which are outside the application ranges set forth in the Directions, application in any manner not explicitly set forth in the Directions, moisture conditions outside the moisture range specified in the Directions, or the presence of products other than those set forth in the Directions in or on the soil, crop or treated vegetation . This Company does not warrant any product reformulated or repackaged from this product except in accordance with this Company’s stewardship requirements and with express written permission from this Company . TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER OR BUYER, AND THE LIMIT OF THE LIABILITY OF THIS COMPANY OR ANY OTHER SELLER FOR ANY AND ALL LOSSES, INJURIES OR DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT (INCLUDING CLAIMS BASED IN CONTRACT, NEGLIGENCE, STRICT LIABILITY, OTHER TORT OR OTHERWISE) SHALL BE THE PURCHASE PRICE PAID BY THE USER OR BUYER FOR THE QUANTITY OF THIS PRODUCT INVOLVED, OR, AT THE ELECTION OF THIS COMPANY OR ANY OTHER SELLER, THE REPLACEMENT OF SUCH QUANTITY, OR, IF NOT ACQUIRED BY PURCHASE, REPLACEMENT OF SUCH QUANTITY . TO EXTENT CONSISTENT WITH APPLICABLE LAW, IN NO EVENT SHALL THE COMPANY OR ANY OTHER SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES . Buyer and all users are deemed to have accepted the terms of this LIMIT OF WARRANTY AND LIABILITY which may not be varied by any verbal or written agreement . Bayer, Bayer Cross, Degree Xtra, Harness, Roundup Ready, Roundup Technology, Roundup WeatherMAX and Roundup are registered trademarks of Bayer Group . ©2025 Bayer Group . All rights reserved . All other trademarks are the property of their respective owners . EPA Reg . No . 524-511 In case of emergency involving this product, Call Collect, day or night, 1-800-334-7577 . Packed for: Bayer CropScience LP 800 N . Lindbergh Blvd . St . Louis, Missouri 63167 USA 7.125” 6.875” 6.495” COPY AREA COPY AREA 6.625”

9 7.125” 6.875” 6.495” COPY AREA COPY AREA 6.625”

10 7.125” 6.875” 6.495” COPY AREA COPY AREA 6.625”

11 7.125” 6.875” 6.495” COPY AREA COPY AREA 6.625”

US62211898D (211110Dv2) Degree Xtra MINI BULK ECL BASE Colors: Black Date: 06/17/2025 Label Coor dinator: Danielle Ohlendorf US62211898D 211110Dv2 06/25EPA Est . NET CONTENTS GAL Read the entire label before using this product . Use only according to label instructions . Read “LIMIT OF WARRANTY AND LIABILITY” before buying or using . If terms are not acceptable, return at once unopened . THIS IS AN END-USE PRODUCT . BAYER DOES NOT INTEND AND HAS NOT REGISTERED IT FOR REFORMULATION . IT IS INTENDED THAT REPACKAGING BE ONLY IN ACCORDANCE WITH A BAYER REPACKAGING OR TOLL REPACKAGING AGREEMENT . KEEP OUT OF REACH OF CHILDREN CAUTION! PRECAUTIONARY STATEMENTS Hazards to Humans and Domestic Animals. Prolonged or repeated skin contact may cause allergic reactions in some individuals . Avoid contact with skin or clothing . Wash thoroughly with soap and water after handling . FIRST AID IF ON SKIN OR ON CLOTHING • Take off contaminated clothing . • Rinse skin immediately with plenty of water for 15 to 20 minutes . • Call a poison control center or doctor for treatment advice . • Sensitized persons should avoid further contact and r euse of contaminated clothing . • Have the product container or label with you when calling a poison control center or doctor, or going for treatment . • You may also contact 1-800-334-7577, collect day or night, for emergency medical treatment information . • This product is identified as DEGREE XTRA HERBICIDE, EPA Registration No. 524-511 . Personal Protective Equipment (PPE) Mixers, loaders, applicators, and other handlers must wear: long-sleeved shirt and long pants, waterproof gloves shoes plus socks, chemical-resistant apron when mixing/loading, cleaning up spills, or cleaning equipment, or otherwise exposed to the concentrate . See Engineering Controls for additional requirements . Engineering Controls: When applicators use enclosed cabs in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170 .240 (d) (5)], the handler PPE requirements may be reduced or modified as specified in the WPS . Follow manufacturer’s instructions for cleaning/maintaining PPE . If no such instructions for washables exist, use detergent and hot water . Keep and wash PPE separately from other laundry . Discard clothing or other absorbent materials that have been drenched or heavily contaminated with the product’s concentrate . Do not reuse them . IMPORTANT: When reduced PPE is worn because an enclosed cab is being used, applicators must be provided all PPE specified above for “applicators and other handlers” and have such PPE immediately available for use in an emergency, such as a spill or equipment breakdown . User Safety Recommendations Users should: • Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet . • Remove clothing/PPE immediately if pesticide gets inside . Then wash thoroughly and put on clean clothing . • Remove PPE immediately after handling this product . Wash the outside of gloves before removing . As soon as possible, wash thoroughly and change into clean clothing . Environmental Hazards NON-TARGET ORGANISM ADVISORY STATEMENT: This product is toxic to plants and may adversely impact the forage and habitat of non-target organisms, including pollinators, in areas adjacent to the treated site . Protect the forage and habitat of non-target organisms by following label directions intended to minimize spray drift . Atrazine can travel (seep or leach) through soil and can enter ground water which may be used as drinking water . Atrazine has been found in ground water . Users are advised not to apply atrazine to sand and loamy sand soils where the water table (ground water) is close to the surface and where these soils are very permeable, i .e . , well drained . Your local agricultural agencies can provide further information on the type of soil in your area and the location of ground water . Ground water contamination may be reduced by diking and flooring of permanent liquid bulk storage sites with an impermeable material . This product is toxic to fish and aquatic invertebrates . Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark . Do not apply when weather conditions favor drift from treated areas . Runoff and drift from treated areas may be hazardous to aquatic organisms in neighboring areas . Do not contaminate water when disposing of equipment washwaters . GROUNDWATER ADVISORY: Acetochlor is known to leach through soil into groundwater under certain conditions as a result of label use . This chemical may leach into groundwater if used in areas where soils are permeable, particularly where the water table is shallow . SURFACE WATER ADVISORY: This product may impact surface water quality due to runoff of rainwater . This is especially true for poorly draining soils and soils with shallow ground water . This product is classified as having high potential for reaching surface water via runoff for several weeks after application . A level, well-maintained vegetative buffer strip between areas to which this product is applied and surface water features such as ponds, streams, and springs will reduce the potential loading of acetochlor from runoff water and sediment . Runoff of this product will be reduced by avoiding applications when rainfall or irrigation is expected to occur within 48 hours . See Sections 5.1, Use Restrictions, and 5.2, Tile-Outletted Terraced Fields Containing Standpipes, for additional specific information. DIRECTIONS FOR USE RESTRICTED USE PESTICIDE due to ground and surface water concerns . For retail sale to and use only by Certified Applicators, or persons under their direct supervision and only for those uses covered by the Certified Applicator’s certification . It is a violation of Federal law to use this product in any manner inconsistent with its labeling . Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk Counties of New York State . Not for use in the states of Hawaii or Alaska, or in the U . S . territories (Puerto Rico, Guam, American Samoa, the U . S . Virgin Islands, and the North Mariana Islands) . Agricultural Use Requirements Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170 . Refer to supplemental labeling under “AGRICULTURAL USE REQUIREMENTS” in the DIRECTIONS FOR USE section for information about this standard . STORAGE AND DISPOSAL Do not contaminate water, food, or feed by storage and disposal . PESTICIDE STORAGE: Store pesticides away from food, pet food, feed, seed, fertilizers, and veterinary supplies . Keep container closed to prevent spills and contamination . PESTICIDE DISPOSAL: To avoid wastes, use all material in this container, including rinsate, by application in accordance with label directions . If wastes cannot be avoided, offer remaining product to a waste disposal facility or pesticide disposal program . S uch programs are often run by state or local governments or by industry . All disposal must be in accordance with applicable federal, state and local regulations and procedures . CONTAINER HANDLING AND DISPOSAL : Refillable container . Refill this container with pesticide only . Do not reuse this container for any other purpose . Cleaning this container before refilling is the responsibility of the refiller . C leaning this container before final disposal is the responsibility of the person disposing of the container . To clean this container before final disposal, empty the remaining contents from this container into application equipment or a tank mix . Fill the container about 10 percent full with water . Agitate vigorously or recirculate water with the pump for 2 minutes . Pour or pump rinsate into application equipment or rinsate collection system . Repeat this rinsing procedure two more times . Then offer this container for recycling, if available . To obtain information about recycling refillable containers, contact Bayer at 1-800-768-6837 . Bayer, Bayer Cross and Degree Xtra are registered trademarks of Bayer Group . ©2025 Bayer Group . All rights reserved HERBICIDE DEGREE XTRA HERBICIDE is an encapsulated herbicide for weed control in Field Corn, Production Seed Corn, Silage Corn, Sweet Corn, Popcorn, and Grain Sorghum (milo). ACTIVE INGREDIENTS: *Acetochlor, 2-chloro-N-ethoxymethyl-N-(2-ethyl-6-methylphenyl)acetamide . . . . . . . . . . . . . . . . . . . . 29.0% **Atrazine, 2-chloro-4-(ethylamino)-6-(isopropylamino)-s-triazine and related triazines . . . . . . 14.5% OTHER INGREDIENTS: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56.5% 100.0%

Contains 324 grams per liter or 2 .70 pounds per U . S . gallon of the active ingredient acetochlor . ** Contains 161 grams per liter or 1 .34 pounds per U . S . gallon of the active ingredient atrazine and related triazines . Protected by U . S . Patent Nos . 5,225,570 and 5,925,595 . No license granted under any non-U . S . patent(s) . EPA Reg. No. 524-511 KEEP OUT OF REACH OF CHILDREN CAUTION! Carefully follow detailed instructions in label booklet . See label booklet for complete Directions for Use SHAKE WELL BEFORE USING Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk Counties of New York State . Not for use in the states of Hawaii or Alaska, or in the U . S . territories (Puerto Rico, Guam, American Samoa, the U . S . Virgin Islands, and the North Mariana Islands) . FOR PRODUCT INFORMATION OR ASSISTANCE IN USING THIS PRODUCT, CALL TOLL-FREE, 1-866-99BAYER (1-866-992-2937) IN CASE OF AN EMERGENCY INVOLVING THIS HERBICIDE PRODUCT, OR FOR MEDICAL ASSISTANCE, CALL COLLECT, DAY OR NIGHT, 1-800-334-7577 Packed for: Bayer CropScience LP 800 N . Lindbergh Blvd . St . Louis, Missouri 63167 USA ©2025 Bayer Group RESTRICTED USE PESTICIDE due to ground and surface water concerns . For retail sale to and use only by Certified Applicators, or persons under their direct supervision and only for those uses covered by the Certified Applicator’s certification . GROUP GROUP 5 15 HERBICIDE HERBICIDE ATRAZINE ACETOCHLOR

91 KiB Raw Blame History Unescape Escape

Degree Xtra Herbicide

91 KiB

Raw Blame History