crop-chem-docs/corpus/epa_ppls/5905-553.md

# HM-2025

- EPA Reg No: **5905-553**
- Registrant: HELENA AGRI-ENTERPRISES, LLC, D/B/A HELENA CHEMICAL COMP
- Signal word: Warning
- Active ingredients: 2,4-D (11.4%); Carfentrazone-ethyl (1.05%)
- Label accepted: 2005-11-14
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/005905-00553-20051114.pdf

---
'Sq05-5e'3 
U.S. ENVIRONMENTAL PROTECTION AGENCY 
Office of Pesticide Programs 
Registration Division (H750SC) 
401 "M" St., S.W. 
Washington, D.C. 20460 
NOTICE OF PESTICIDE: 
__ X __ Registration 
Reregistration 
(under FIFRA, as amended) 
Name and Address of Registrant (include ZIP Code) : 
Helena Chemical Company 
225 Schilling Blvd., Suite 300 
Collierville, Tennesee 38017 
EPA Reg. 
Number: 
5905-553 
Term of Issuance: 
Date of Issuance: 
NOV 14 'JU]j 
Conditional 
Name of Pesticide Product: 
HM-2025 
Note: Changes in labeling differing in substance from that accepted in connection with this registration must 
be submitted to and accepted by the Registration Division prior to use of the label in commerce. In any 
correspondence on this product always refer to the above EPA registration number. 
On the basis of information furnished by the registrant. the above named pesticide is hereby 
registered/reregistered under the Federal Insecticide, Fungiclde and Rodentlcide Act. 
Registration is in no way to be construed as an endorsement or recommendation of this product by the Agency. 
In order to protect health and the envlronment, the Administrator, on his mot lon, may at any time suspend or 
cancel the registration of a pestl~ide in accordance with the Act. The acceptance of any name in connection 
with the reglstration of a product under this Act 18 not to be construed as giving the registrant a right to 
exclusive use of the name or to lts use lf lt has been covered by others. 
This product is conditionally registered ln accordance with FIFRA sec. 
3(c)(7)(A) provided that you: 
1. Submit/clte all data required for the registration/reregistration 
review of your product when the Agency requlres all registrants of similar 
products to submit such data. 
2. Make the following label changes: 
a. Revise the EPA Registration Number to read. "EPA Reg.No. 5905-553 
3. The results of the one year storage stablllty (830.6317) and corrosion 
characteristics (8306320) studies must be submitted to the Agency within one­
year of the date of this registration notice 
jlgnature cf :'p:;"':, 
/ 
v

page 2 
EPA Reg. No. 5905-553 
4. This product is category 2 for primary eye irritation. Therefore a 
"Note to Physician" is not required on the labeling. 
5. Under the "User Safety Requi rements" secti on, add the fall owi ng 
statement: "When reduced PPE is worn because a closed system is bei ng used, 
handl ers must be provi ded all PPE speci fi ed above for .. app 1 i cators and other 
handlers" and have such PPE immediately available for use in an emergency, such 
as a spill or equipment breakdown. 
6. The chemical resistance category on the label ing is listed as T'. It 
cou 1 d not be determi ned whether any i ngredi ents that woul d place it in thi s 
category. The 1 abe 1 i ng shaul d be revi sed to refl ect category "C". Pl ease 
address these inconsistencies to the Agency so we can determine if any additional 
precautionary language is needed. 
7. Submit two copies of the revised final printed label for the record. 
A stamped copy of the label is enclosed for your records. 
If these conditions are not complied with. the registration will be subject to 
cancellation in accordance with FIFRA sec. 6(e). Your release for shipment of 
the product constltutes acceptance of these condltions. 
Enclosure 
Joanne I. Miller 
Product Manager (23) 
~erblClde Branch 
Reglstratlon Dlvision (7505C)

," .. 
(T: .. . . ;, .' 
." ... ,.' 
: 
• • 
... ' .. ",::;;" ;,' ,''';~:1',:;:;;'::;:;:',~( :: .. 'iii~ 
ACCEPTED 
with COMMENTS 
In EPA Letter Dated: 
, . r , 
• 
· , .. · • , • • . • 
, , 
• . , 
· · 
, 
• 
NOV 1 4 2005 
Under the Fedcrall,.........;.Ic. 
F.mgicidc. and Rodenicidc Act 
IIII1111C11dcd, for the pesticide 
regiJIered under EPA Reg. No 
S'lQ5-5S3

2025 
ACTIVE INGREDIENT: 
2, 4-0ichlorophenoxyacetic Acid' ......................... 1 ': AO% 
Carfentrazone-ethyl: Ethyl n, 2·dichloro·5· 
[4-( difluoromethyl)·4, 5·dihyrdro-3-methyl·50xo-1 H· 
1, 2,4-triazol·1·ylj·4-fluorobenzenepropanoate ......... 1.05% 
INERT INGREDIENTS: ........................................ 87.55% 
TOTAL.. ................................................. 100.0% 
Contains 0.9471bs of 2,4-0 acid and 0.0871bs of 
Carfentrazone-ethyl per gallon 
'Isomer specific by AOAC Method 6.001·5 (12th Ed.) 
US Patent No. 5,580,567; 6,232,672; 5,741,502; other 
Pat ts P d' en en mg 
"'<:EP OUT OF REACH OF CHILDREN 
,IARNING - AVISO 
Si usted no entiende la etiqueta, busque a alguien para 
que se la explique a usted en detalle. 
(If you do not understand the label, find someone to 
explain it to you.) 
PRECAUTIONARY STATEMENTS 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
WARNING - AVISO 
Causes substantial but temporary eye injury. Do not get in 
eyes or on clothing. Harmful if swallowed. 
FIRST AID 
IFIN EYES: • Hold eye open and rinse slowly and gently 
with water for 15·20 minutes. 
• Remove contact lenses, if present after the 
first 5 minutes, then continue rinsing. 
• Call a poison control center or doctor 
treatment for advice. -
. IF ON SKIN OR 
CLOTHING: • Take off contaminated clothing. 
• Rinse skin immediately with plenty of 
water for 15·20 minutes. 
• Call a poison control center or doctor for 
treatment advice. 
IF SWALLOWED: 
• Call a poison control center or doctor 
immediately for treatment advice. 
• Have person sip a glass of water if able 
to swallow. 
• Do not induce vomiting unless told 
to do so by a poison control center or 
doctor. 
, 
• 
• Do not give anything to an 
unconscious person. 
IrI:~KALED: •. M:>ve person to fresh air. 
.• If pe."son is not breathing, call 911 or an 
ambulance, then give artificial respiration 
preferably mouth·to·mouth if possible. 
• Call a poison control center or doctor . , , 
for further treatment advice. 
HOT LINE NUMBER 
Have the product container or label with you when calling a 
poison control center or doctor, or going for treatment For 
emergency assistance call toll·free, 1·800-424-9300 
(ChemTrec). 
NOTE TO PHYSICIAN: Probable mucosal damage may 
contraindicate the use of gastric lavage. 
SEE INSIDE PANEL FOR ADDITIONAL 
PRECAUTIONARY STATEMENTS. 
EPA REG. NO. 5905· NET CONTENTS: 
EPA EST. NO. 
MANUFACTURED BY 
HELENA CHEMICAL COMPANY 
225 SCHILLING BOULEVARD, SUITE 300 
COLLIERVILLE, TENNESSEE 38017 
PERSONAL PROTECTIVE EQUIPMENT 
Some materials that are chemical-resistant to this product 
are listed below. If you want more options, follow the 
instructions for category F on an EPA chemical resistance 
category selection chart 
Applicators and other handlers must wear: 
Long·Sleeved shirt and long pants 
Chemical·resistant gloves, such as Barrier 
Laminate, Nitrile Rubber, Neoprene Rubber, or 
Viton. 
Shoes plus socks 
Protective Eyewear 
Chemical-resistant apron when cleaning 
equipment mixing or loading. 
Follow manufacturer's instructions for cleaning/maintaining 
PPE. If no such instructions for washables, use detergent 
and hot water. Keep and wash PPE separately from other 
laundry. After each day of use, clothing or PPE must not 
be re·used until it has been cleaned. 
Page 1 of 13

-_._-----
If this container contains over 1 gallon and less than 5 
gallons, mixers and loaders who do not use a mechanical 
system (probe and pump) to transfer the contents of this 
container must wear coveralls or a chemical-resistant 
apron in addition to the other required PPE. 
If this container contains 5 gallons or more in capacity, do 
not open pour. A mechanical system (such as a probe and 
pump or spigot) must be used for transferring the contents 
of this container. If the contents of a non-refillable pesticide 
container are emptied, the probe must be rinsed before 
removal. If the mechanical system is used in a manner 
that meets the requirements listed in the Worker Protection 
Standard (WPS) for agricultural pesticides [40 CFR 
A 70.240 (d) (4)], the handler PPE requirements may be 
. Juced or modified as specified in the WPS. 
Engineering Control Statements 
When handlers use enclosed cabs, or aircraft in a manner 
that meets the requirements listed in the Worker Protection 
Standard (WPS) for agricultural pesticides [40 CFR 
170.240 (d)(4-6)], the handler PPE requirements may be 
reduced or modified as specified in the WPS. 
USER SAFETY RECOMMENDATIONS 
Users should: 
Wash hands before eating, drinking, chewing gum, 
using tobacco or using the toilet. 
Remove clothing immediately if pestiCide gets 
inside. Then wash thoroughly and put on clean 
clothing. 
Remove PPE immediately after handling this 
product. Wash the outside of gloves before 
removing. As soon as possible, wash thoroughly 
and change into clean clothing. 
ENVIRONMENTAL HAZARDS 
Do not apply directly to water, or to areas where' surface 
water is present or to intertidal areas below the mean high 
water mark. Do not apply when weather conditions favor 
drift from target area. Spray equipment used in applying 
this product should be thoroughly cleaned before using for 
any other purpose. Use repeated flushing with soap and 
warm water or suitable chemical cleaner. It is best to use a 
separate sprayer for application of insecticides and 
fungicides. Do not contaminate water by cleaning of 
equipment or disposal of washwaters. 
This product is toxic to aquatic invertebrates. Drift or runoff 
may adversely affect aquatic invertebrates and non-target 
plants. 
Groundwater Contamination: Most cases of groundwater 
contamination involving phenoxy herbicides such as 2,4-0 
have been associated with mixinglloading and disposal 
sites. Caution should be exercised when handling 2,4-0 
pesticides at such sites to prevent contamination of 
groundwater supplies. Use of closed systems for mixing or 
transferring this pesticide will reduce· the probability of 
spills. Placement of the mixing/loading equipment on an 
impervious pad to contain spills will help prevent 
groundwater contamination. 
This product may cause injury to desirable plants by 
contacting foliage, stems or roots. Use care in all 
applications to avoid surface water or soil transport to non­
target plant areas. Avoid contamination of irrigation or 
domestic water supplies.. Avoid applications in the vicinity 
of susceptible plants or when winds are blowing toward 
nearby susceptible plants or when temperature inversions 
are expected. Avoid direct application or spray drift to 
susceptible plants since very small quantities of this 
herbicide can cause severe injury in the growing or 
dormant period. Plants contacted may be killed or suffer 
significant injury resulting in grade or yield losses. Do not 
apply in greenhouses. 
The following steps may be helpful in reducing possible 
spray drift from ground or aerial applications: 
1) Keep the spray discharge as near to the target as 
possible while getting good coverage, 
2) Increase the volume of spray mixture per acre, 
3) Use low spraying pressures (as measured at the 
nozzle tips), 
4) Use nozzles which produce coarse spray droplets 
while still providing adequate weed coverage, 
5) Limit applications when wind is blowing toward nearby 
susceptible crops or valuable plants, 
6) Make applications when wind velocity is more 
favorable for on-target deposition - a general guide for 
application would be a) wind velocity of 0-2 mph may 
indicate a temperature inversion which can permit drift; 
b) wind velocity of 3-7 mph usually indicates good 
conditions, but check wind direction relative to nearby 
susceptible crops always allowing for wind shift, c) 
wind velocity 7-10 mph is acceptable if wind direction is 
Page 2 of 13

favorable and no susceptible crops are in the vicinity 
always allowing for wind shift, d) wind velocity of 10-15 
mph is usually not desirable except in areas of stronger 
prevailing winds when direction is favorable and no 
susceptible crops are in the vicinity always allowing for 
wind shift; an agriculturally accepted drift retardant is 
suggested, and e) if wind velocity is over 15 mph do 
not spray, 
7) Properly maintain and calibrate all spray equipment, 
8) For aerial applications, use an effective spray boom 
length that is no more than 75% of the wingspan or 
rotor diameter, and 
g) Use an agriculturally accepted drift retardant designed 
to increase droplet size. 
.rlEMIGATlON PROHIBITION 
00 not apply this product through any type of irrigation 
system. 
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in a 
manner inconsistent with its labeling. 
Do not apply this product in a way that will contact workers 
or other persons, either directly or through drift. Only 
protected handlers may be in the area during application. 
For any requirements specific to your State or Tribe, 
consult the agency responsible for pesticide regulation. 
. .iR/CUL ruRAL USE REQUIREMENTS 
Jse this product only in accordance with its labeling and 
with the Worker Protection Standard, 40 CFR part 170. 
This Standard contains requirements for the protection of 
agricultural workers on farms, forests, nurseries, and 
greenhouses, and handlers of agricultural pesticides. It 
contains requirements for training, decontamination, 
notification, and emergency assistance. It also contains 
specific instructions and exceptions pertaining' to the 
statements on this label about personal protective 
equipment (PPE), and restricted-entry interval. The 
requirements in this box only apply to uses of this product 
that are covered by the Worker Protection Standard. 
Do not enter or allow worker entry into treated areas during 
the restricted entry interval (REI) of 48 hours. 
PPE required for early entry to treated areas that is 
permitted under the Worker Protection Standard and that 
involves contact with anything that has been treated, such 
as plants, soil, or water, is: 
Coveralls 
Chemical-resistant gloves such as Barrier 
laminate, Nitrile Rubber, Neoprene Rubber, or 
Viton 
Shoes plus socks 
Protective Eyewear 
NON-AGRICULTURAL USE REQUIREMENTS 
The requirements in this box apply to uses of this product 
that are NOT within the scope of the Worker Protection 
Standard for agricultural pesticides (40 CFR Part 170). 
The WPS applies when this product is used to produce 
agricultural plants on farms, forests, nurseries, or 
greenhouses. 
USE REQUIREMENTS FOR PASTURES, PERENNIAL 
GRASSLANDS, RANGELAND, FALLOW LAND AND 
NON CROP AREAS: Do not enter treated areas until spray 
has dried. For early entry to treated areas, wear eye 
protection, chemical-resistant gloves, long-sleeved shirt, 
long pants, shoes and socks. 
TURF USE REQUIREMENTS: Do not allow persons (other 
than applicator) or pets on treated area during application. 
Do not enter treated areas until spray has dried. NOTE: 
For application to turf being grown for sale or other 
commercial use as sod, or for commercial seed production, 
or for research purposes, follow AGRICULTURAL USE 
REQUIREMENTS on this label. 
STORAGE AND DISPOSAL 
PROHIBITIONS: Do not contaminate water, food, or feed 
by storage or disposal. Do not store under conditions that 
might adversely affect the container or its ability to function 
properly. 
° STORAGE: Do not store below temperature of 0 F. If 
frozen, warm to 40°F and re-dissolve before using by 
rolling or shaking container. This product can be stored in 
an unheated building. Store in a safe manner. Store in 
original container only. Keep container tightly closed when 
not in use. Reduce stacking height where local conditions 
can affect package strength. 
Page 3 of 13

PESTICIDE DISPOSAL: Pesticide wastes are toxic. 
Improper disposal of excess pesticide, spray mixture, or 
rinsate is a violation of Federal law and may contaminate 
groundwater. If these wastes cannot be disposed of by use 
according to label instructions, contact your State Pesticide 
or Environmental Control Agency, or the Hazardous Waste 
representative at the nearest EPA Regional Office for 
guidance. 
CONTAINER DISPOSAL: 
Metal: Triple rinse (or equivalent). Then offer for recycling 
or reconditioning, or puncture and dispose of in a sanitary 
landfill, or by other procedures approved by state and local 
authorities. 
.astie: Triple rinse (or equivalent). Then offer for recycling 
or reconditioning, or puncture and dispose of in a sanitary 
landfill, or incineration, or, if allowed by state and local 
authorities, by burning. If burned, stay out of smoke. 
Returnable-Refillable Container (Drum): After use, 
return the container to the point of purchase or designated 
locations. This container must only be filled with 2025™. 
DO NOT RE-USE THIS CONTAINER FOR ANY OTHER 
PURPOSE. Prior to refilling, inspect thoroughly for 
damage such as cracks, punctures, abrasions, and 
damaged or worn out threads on closure devices. Do not 
refill or transport damaged or leaking containers. Check for 
leaks after refilling and before transportation. If the 
,ntainer is not being refilled, return to the point of 
.)urchase. 
GENERAL INFORMATION 
When used as directed, 2025™ provides selective control 
of broadleaf weeds in post, fallow, burn-down, Rights-of­
way, and Industrial vegetation management applications. 
Local conditions, crop varieties, and application method 
may affect perfomnance of this product User· should 
consult local extension service, agricultural experiment 
station, or university weed specialists, and state regulatory 
agencies for recommendations in your area. Best results 
are obtained when product is applied to young succulent 
weeds that are actively growing. Application rates lower 
than recommended will not be satisfactory on susceptible 
annual weeds. For perennial weeds and conditions such 
as the very dry areas of the western states, where control 
is difficult the higher recommended rates should be used. 
When product is used for weed control in crops, the growth 
stage of the crop must be considered. Some plants and 
weeds, especially woody varieties, are hard to control and 
may require repeat applications. Application rates should 
be 3 to 5 gallons of total spray by air or 10 to 25 gallons by 
ground equipment unless otherwise directed. In either 
case, use the same amount of 2025™ per acre. 2025™ 
should not be allowed to come into contact with desirable, 
susceptible plants such as beans, cotton, fruit trees, 
grapes, legumes, ornamentals, peas, tomatoes and other 
vegetables. 2025™ should not be used in greenhouses. 
Under wamn moist conditions, herbicide symptoms may be 
accelerated and crop responses encountered. To minimize 
the potential for crop injury, applications should not be 
made within 6-8 hours of either rain or irrigation. The 
addition of oil-based adjuvants and surfactants are not 
required unless directed otherwise. 
If stored below freezing, it may be necessary to wamn 
product to 40· and agitate before using. This does not 
affect the efficiency of the product Spray equipment used 
to apply 2025™ or other products containing 2,4-D should 
not be used for any other purpose until thoroughly cleaned 
with a suitable chemical cleaner. 
WEEDS CONTROLLED 
2025™ will control or partially control the following as well 
as many other noxious plants susceptible to 2,4-D and 
Carfentrazone-ethyl: 
A1ligatorweed 
Artichoke 
Bitiercress. smallftowered 
Blue Thistle 
Baxelder 
Buckhorn 
Bulrush 
Burdock.common 
Buttercup, smallnowered 
Carpetweed 
Chickweed 
Cinquefoil. common & rough 
Coffeeweed 
Creeping jenny 
Curly indigo 
Duckweed 
Evening primrose, common 
Fanweed 
Four o'clock 
Goatsbeard 
Hemp 
Honeysuckle 
Indigo 
Jerusalem artichoke 
Jimsonweed 
ArrolMlead 
Bitter win!ercress 
Blue lettuce 
Blueweed. Texas 
Broomweed, canmon 
Bull nettle 
Bur ragweed 
Burhead 
Carolina geranium 
Catnip 
Chicory 
Cocklebur. conrnon 
Cornnower 
Croton (Texas, woolly) 
Dogfennel (mayweed) 
Elderberry 
Evening primrose, cutieaf 
Figwort 
Galinsega (elderberry, hairy) 
Healall 
Hoary Cress 
Horsetail 
Ironweed 
Jewelweed 
Klamathweed 
Page 4 of 13

Ladysthlfllb 
Loco, Bigbend 
Marestail 
Mexican weed 
Lambsquarters, common 
Mallow (Venice, dwarf, little) 
Marshelder 
Milk vetch 
Momingglory (annual, common, Wy, woolly) 
Mustards (except blue), prior to bolting 
Mouselail 
Nutgrass 
Parrotteather 
Pennywort 
Pigweed, redroot (up to 41 
Plantains 
Pokeweed 
Poverty weed 
Purslane, conmon 
Ragweeds (ccmnon, giant) 
Rough fleabane 
Shepherdspurse 
Sneezeweed, bitter 
Spanishneedles 
'tinkweed 
"nflower 
Tumbleweed 
Vetches, except hairy 
Virginia creeper 
Water lily 
Wild hernp 
Wild mustard 
Wild radish 
Wild sweet palata 
Witchweed 
Yellow goatsbeard 
Yellow starthisHe 
Nightshade, Eastern Black «4") 
Pennycress (fanweed) 
Pepperweeds (except perenniaQ 
Poison ivy 
Poorjoe 
Puncture vine 
Quickweed 
Redstern 
Rush 
Sicklepod 
Sowthistle (annual, spiny) 
Speedwell 
Sumacs 
Sweetclover (annual) 
VelveHeaf 
V'ginia copperleaf 
Water hyacinth 
Water Hernp (up to 2" talQ 
Water primrose 
Wild lettuce 
Wild parsnip 
Wild rape 
Willow 
Wormwood 
Yellow rocket 
Weeds Partially Controlled (Higher rates and/or repeated 
applications may be needed): 
Alfalfa 
Bindweeds (hedge, European) 
II thisHe 
.Iamise 
~omgromwell 
Dandelion 
Dogbanes 
Ground Wy 
Henbit 
Knotweed 
Manzanita 
Nettles 
Prickly lettuce 
Russian thisHe 
Sagebrush (big, sand) 
Sand shinnery oak 
Smartweed, Pennsywania 
Vervains 
Western ironweed 
Wild garlic 
MIXING INSTRUCTIONS 
Beggarticks 
Buckbrush 
Canada thisHe 
Clover, red 
Coyotebrush 
Docks 
Goldenrod 
Hawkweed 
Hoary cress 
Many-flowered aster 
Musk thistle 
Pepper!TaSS 
Rabbilbrush 
Sage, coastal 
Salsify (western, common)' 
Smartweed, annual 
Tansy ragwort 
Vetch, hairy 
Wild carrot 
Wild onion 
2025™ is a water dispersible herbicide concentrate that 
forms a macro-emulsion when diluted with water. For 
certain specified applications, liquid fertilizer or oil may 
replace part or all of the water as a diluent. If dry flowable 
(DF), wettable powder (WP) or flowable (F) tank mix 
products are to be used, these should generally be added 
to the spray tank first. Refer to the mixing directions on the 
labels of the tank mix products, For best results, thoroughly 
clean sprayer immediately after use by flushing system 
with water and heavy duty detergent such as Wipe Ou(®, 
Water Spray: To prepare a water spray mixture, fill clean 
spray tank about 1/2 to 213 full with clean water. With 
agitation turned on, add the required amount of 2025™" 
Continue agitation while adding balance of water and 
during spray operations, NOTE: In water this product 
forms a macro-emulsion and can separate upon prolonged 
standing, If spray mixture is allowed to stand, agitate again 
to assure uniformity, 
Liquid Fertilizer Spray: Due to increased risk of crop 
foliage bum with fertilizer, use only as recommended on 
this label or supplemental labeling distributed for 2025™, 
Use fertilizer rate recommended locally, Fill clean spray 
tank about 1/2 to 213 full with liquid nitrogen fertilizer (UAN 
or urea) solution, Add required amount of product with 
vigorous agitation running, Continue agitation while adding 
balance of liquid fertilizer and during spray operations, 
Application should be made immediately, Overnight 
storage of mixture is not recommended, Application during 
very cold (near freezing) temperatures is not advisable 
because of the likelihood of crop injury, This product is 
formulated to be compatible with most liquid nitrogen 
solutions, however, due to variability in fertilizers, users 
may wish to perform a jar compatibility test before large 
scale mixing, 
Oil Spray: Use only as recommended on this label or 
supplemental labeling distributed for 2025™, Fill clean 
spray tank about 1/2 to 213 full with an oil approved for 
agricultural use. (diesel, fuel oil, MSO, soybean etc.) Add 
required amount of product with agitation turned on. 
Continue agitation while adding balance of oil. The 
resulting mixture is a solution and will generally remain 
uniform without agitation once mixed. However, agitation 
is suggested if available, Do not allow any water to get into 
the spray mixture to avoid formation of an invert emulsion 
(mayonnaise consistency). 
Water Spray With Oil: Use only as recommended on this 
label or supplemental labeling distributed for 2025™. 
Page 5 of 13

Where a combination of water and oil diluent is 
recommended, the use of emulsifiable crop oil or crop oil 
concentrate is suggested since mild agitation will be 
sufficient Mix in the sequence of water, product, and oil. If 
diesel or other non-emulsified oils listed above under 'Oil 
Spray' are desired for use with water, add no more than 1 
quart of such oil per 1 gallon of water and agitate 
vigorously until tank is emptied. If possible, premix non­
emulsified oil with this product and add this premix to a 
mostly filled spray tank with agitation on. Follow these 
procedures carefully to avoid formation of an invert 
emulsion (mayonnaise consistency). 
APPUCATION PROCEDURES 
.. -e calibrated spray equipment for all types of applications 
, assure applying the recommended amount of spray 
,nixture per acre. Use sufficient spray volume within the 
ranges specified to obtain good coverage of weeds. 
2025™ is absorbed sufficiently within 1-4 hours after 
application to provide adequate weed control. 
_ Ground Broadcast Spray: Unless otherwise specified in 
the appropriate crop or non-crop directions, apply in 1 0 or 
more gallons of spray solution per acre. Use enough spray 
volume to provide uniform coverage of weeds, taking into 
account the amount of vegetation present and the type of 
application equipment to be used. As crop canopy and 
weed density increase, a higher spray volume may be 
needed for equivalent coverage and weed control. Typical 
JP applications utilize 10 to 50 gallons of spray solution 
.'er acre, while certain high volume non-crop applications 
may utilize more than 100 gallons per acre. Use coarse 
sprays to minimize potential spray drift. Do not apply with 
hollow cone nozzles or other nozzles that produce fine 
spray droplets. Boom spraying with flat fan or low volume 
nozzles is generally most suitable for ground broadcast 
applications. 
Ground Band Spray: Determine band equivalents to 
broadcast rates and volumes by the following formulas: 
Band width in inches 
Row width in inches 
Band width in inches 
Row width in inches 
x Broadcast = Band rate 
rate per acre per acre 
x Broadcast = Band volume 
volume per acre per acre 
Aerial Broadcast Spray: Unless otherwise specified in 
the appropriate crop or non-crop directions, apply in 3 to 5 
gallons of spray solution per acre. For best coverage and 
weed control, as well as reduced potential for spray drift, a 
minimum of 3 gallons per acre is suggested. Avoid using 
nozzles or nozzle configurations that generate fine 
droplets. One configuration usually found to be suitable 
includes straight stream nozzles (such as disk with no swirl 
plate) directed straight back along the wind stream. 
Mechanical flagging or 
GPS (Global Positioning Systems) systems are suggested 
to obtain more uniform application. 
With fixed-wing or helicopter application, an exactly even 
swath deposition may not be achieved, and consequently, 
crop injury or pesticide nonperformance may result wholly 
or in part. Do not apply by air during periods of thermal 
inversion. Avoid application if potential for drift is excessive 
and/or susceptible crops are growing in the vicinity. 
TANK MIXES 
Unless otherwise prohibited on this label or the label of an 
intended tank mix product this product may be applied in 
combination with any herbicide registered for the same 
crop, timing, and method of application. Observe the most 
restrictive label statements of various tank mix products 
used. LIABILITY FOR CROP INJURY RESULTING FROM 
A TANK MIXTURE NOT SPECIFIED ON THIS LABEL, OR 
SUPPLEMENTAL LABELING DISTRIBUTED FOR 2025™, 
IS SPECIFICALLY DISCLAIMED BY HELENA CHEMICAL 
COMPANY. 
COMPATIBILITY 
Before full-scale mixing of this product with other 
herbicides, fertilizer solutions and adjuvants, it is advisable 
to determine the compatibility of the proposed mixture. 
Use proportionate quantities of each ingredient and mix in 
a small container. Always mix one product thoroughly with 
the diluent before adding another product If no 
incompatibility is evident after 30 minutes, the mixture is 
generally compatible for spraying. 
PLANTING IN TREATED AREAS 
Labeled Crops: Within 29 days following an application of 
this product plant only those crops named as use sites on 
this or other registered 2,4-0 or carfentrazone-ethyllabels. 
Follow more specific limitations, if any, provided in the 
Page 6 of 13

directions for individual crops. Labeled crops may be at 
risk for crop injury or loss when planted soon after 
application, especially in the first 14 days. Degradation 
factors described below should be considered in weighing 
this risk. 
Other Crops: All other crops may be planted 30 or more 
days following an application without concem for illegal 
residues in the planted crop. However, under certain 
conditions, there may be a risk of injury to susceptible 
crops. Degradation factors described below should be 
considered in weighing this risk. Under normal conditions, 
any crop may be planted without risk of injury if at least 90 
days of soil temperatures above freezing have elapsed 
''lce application. 
Jegradation Factors: When planting into treated areas, the 
risk of crop injury is less if lower rates of product were 
applied and conditions following application have included 
warm, moist soil conditions that favor rapid degradation of 
2,4-0. Risk is greater if higher rates of product were 
applied and soil temperatures have been cold and/or soils 
have been excessively wet or dry in the days following 
application. Consult your local Agricuttural Extension 
Service for information about susceptible crops and typical 
soil conditions in your area. 
APPLICATIONS 
QEAD ALL PRECEDING GENERAL SECTIONS OF 
\BEL AND WARRANTY BEFORE USE. 
Unless otherwise specified, applications may be made by 
ground or air equipment Ground applications may provide 
more thorough coverage and beller weed control. For 
selective postemergent weed control in crops, do not add 
oil, surfactant fertilizer or other additives unless specifically 
recommended on this label or supplemental labeling. 
CORN (Field, Sweet and Pop) 
This product may be applied to corn at several different 
timings. In all cases, plant com to a uniform depth of at 
least 1 Yo inches. Avoid applying this product with Accenl® 
SP Herbicide because severe grass control antagonism 
may occur. Apply this product at least 7 days before or 3 
days after Accenl® SP Herbicide. Note: Do not apply 
more than 42 ounces of 2025'" (0.031 pound active 
carfentrazone) per acre per season including fallow, pre­
plant burndown and labeled crop applications. 
Prep/ant: To control existing broadleaf weed seedlings or 
burn down susceptible cover crops, prior to planting, apply 
from 7 to 14 days before planting. To control grasses and 
certain other problem weeds, it may be desirable to use a 
tank mixture with other herbicides. Liquid fertilizers and 
agricutturally approved surfactants may be added. 
Observe the most restrictive label statements of various 
tank mix products used. 
Application Rates: Do not apply on fine or medium 
textured soils (silt & clay loams) with less than 1% organic 
mailer or on coarse textured soils (sand, sandy loam, 
loamy sand) with less than 2% organic matter. For fine or 
medium textured soils with 1% or more organiC matter, 
apply at a rate of 8 - 12 ounces per acre. On coarse" 
textured soils with 2% or more organic matter, apply 5 -12 
ounces per acre. 
Preemergence: To control small broadleaf weeds, apply 
after planting, but before com emerges. Liquid fertilizers 
and agriculturally approved surfactants may be added. Do 
not apply preemergence if a preplant application of this 
product was made. 
Application Rates: Do not apply on fine or medium 
textured soils (silt & clay loams) with less than 1% organic 
mailer or on coarse textured soils (sand, sandy loam, 
loamy sand) with less than 2% organic matter. For fine or 
medium textured soils with 1 % or more organic maller, 
apply at a rate of 8 - 12 ounces per acre. On coarse" 
textured soils with 2% or more organic matter, apply 8 -12 
ounces per acre. 
"Due to the lower rate, partial weed control may result on 
coarse soils. 
Postemergence: 
Early Postemergence: To control small broadleafweeds, 
apply broadcast from spike to 4-leaf stage of crop or up to 
8 inches tall, whichever comes first. Avoid spraying just 
after corn leaves unfold. Postemergence application 
should not follow a preplant or preemergence application 
by less than 3 weeks. Use rates stipulated under 'Corn 
Postemergence Application Rates' below. 
Late Postemergence: Typical timing for this application is 
when most broadleaf weeds are no more than 4 to 6 inches 
tall and corn is between 8 and 16 inches tall. The timing 
page 7 of 13

can extend until corn is 36 inches tall or to tasseling, 
whichever comes first but weeds usually become too large 
and hard to control. Perennial weeds should be in the bud 
to bloom stage for best results. Apply as a directed spray 
using drop nozzles to keep spray off crop foliage. Do not 
apply from tasseling to hard dough stage. Use the 
following rates. 
General: Spike to 4-leaf or up to 8 inches tall apply by 
ground or aerially as an early posternergence over-tha-top 
broadcast spray at 5 - 10 oz per acre. When corn is 8 -36 
inches tall, before tasseling, apply by ground only as a late 
postemergence directed spray using drop nozzles at 8 - 10 
oz per acre. Lowest rates may not provide adequate weed 
'ntrol unless used in a tank mix with another registered 
~rbicide. 
Note: Where an adjuvant is required because of tank 
mixing with another herbicide, use the lowest 
recommended concentration of a non ionic surfactant 
(0.125% vol./vol. or less). Treated crop may be brittle and 
subject to breaking by wind and/or cultivation, especially in 
the 2 weeks following application. 
Preharvest: After the hard dough (or denting) stage when 
silks have turned brown, apply 2.0 - 4.5 pints per acre to 
suppress perennial weeds such as hemp dogbane or field 
bindweed, and many tall weeds such as cocklebur, 
pigweed, and sunflower that interfere with harvest Weed 
ed production will also be suppressed if application is 
rior to the flowering stage of weeds. The high rate is 
recommended under dry conditions. Do not forage or feed 
com fodder for 7 days following application. 
Postharvest Following the harvest of corn, perennial or 
biennial weeds produce new fall growth. To aid in 
suppressing these weeds before a hard freeze, product 
may be applied at the rate of 1 - 2.5 pints per acre either 
alone or in a combination with other registered herbicides. 
See 'Planting in Treated Areas' section. If products to be 
tank mixed have more restrictive limitations, these 
limitations should be followed. 
SORGHUM (Grain) 
Postemergence: To control small broadleaf weeds, apply 
when sorghum is 6 to 15 inches tall to top of canopy. If 
sorghum is taller than 8 inches to top of canopy, use drop 
nozzles to keep spray off crop foliage. Do not treat during 
the boot flowering or early dough stages. Do not forage or 
feed fodder for 7 days following application. Use rates that 
follow. 
Application Rates: When crop is 6 to 8 inches tall use as 
an over-the-top broadcast spray by ground or air at 5 -10 
oz per acre. When sorghum reaches 8 to 15 inches tall, 
use as a directed spray using drop nozzles with application 
by ground only at 8 -10 oz per acre. The lowest rates may 
not provide adequate weed control unless used in a tank 
mixture with another registered herbicide. Highest rates 
may increase risk of injury. 
SMALL GRAINS (Wheat. Oats. Barlev) NOT 
UNDERSEEDED WITH A LEGUME 
Apply as directed below. 
Livestock Feeding Restrictions: Do not permit dairy 
animals or meat animals being finished for slaughter to 
forage or graze treated grain fields within 2 weeks aIIer 
treatment Do not feed treated straw to livestock if an 
emergency and/or preharvest treatment is applied. 
Liquid Nitrogen Fertilizers: At full tiller, product may be 
combined with liquid nitrogen fertilizers suitable for foliar 
application to small grains. Refer to 'Mixing Instructions' 
section of this label for further information. Fertilizers can 
increase foliage contact burn of herbicides. Reducing the 
fertilizer rate and concentration will reduce the hazard of 
foliage burn. 
Tank Mixtures: 2025™ may be tank mixed with other 
herbicides for control of certain weeds in small grains. Use 
tank mix directions appearing on the labels of the specific 
herbicides when tank mixing with this product Observe all 
precautions and limitations on labeling of product used in a 
particular tank mix. 
Spring Wheat and Barley 
Onset of Til/ering Stage: Grains are generally tolerant of 
these treatments, but risk of crop injury is greater than at 
full tillering stage. Do not make application if the risk of 
injury is unacceptable. The onset of tillering stage is 
defined as grain having 1 or more tillers as well as 3 or 
more leaves. 
Page 8 of 13

Apply 10-16 oz per acre in the spring when grain has 1 or 
more tillers as well as 3 or more leaves. Do not apply from 
boot to dough stage. 
Full Tillering Stage: For these applications, full tillering 
stage is defined as grain that has 3 or more tillers and the 
flag leaf should not be visible. 
Apply 10 - 24 oz of product per acre when grain is in the 
full tiller stage (usually 4 to 8 inches tall). Do not apply 
after the jointing stage. 
Winter Wheat and Barley 
Onset of Tillering Stage: Grains are generally tolerant of 
these treatments, but risk of crop injury is greater than at 
. <. ·'1 tillering stage. Do not make application if the risk of 
,<Jry is unacceptable. 
Apply 10-24 OZ per acre in the spring when grain has 1 or 
more tillers as well as 3 or more leaves. Do not apply after 
the jointing stage. 
Full Tillering Stage: For these applications, grain should 
- have 3 or more tillers and the flag should not be visible. 
Apply 10-24 oz pints per acre when grain is in the full tiller 
stage (usually 4 to 8 inches tall). Do not apply after the 
jointing stage. 
Spring Seeded Oats 
Full ·Tillering Stage: Grains should have 3 or more tillers 
. d the flag leaf should not be visible. Oats are less 
Jlerant to 2025™ than wheat or barley and present a 
greater risk of crop injury. The severity of the weed 
problem should be balanced against the possibility of crop 
injury. larger weeds and hard-to-kill weeds may be poorly 
controlled, especially under dry conditions. 
Apply 12 - 16 ounces per acre when grain is in the full tiller 
stage as specified above. Do not apply before the tiller 
stage nor from boot to dough stage. . 
Postharvest (Wheat, Oats, Barley) 
Following harvest a flush of new weed growth may occur. 
For control of many annual broadleaf species, apply at up 
to 2.5 pints per acre. Certain perennial or biennial weeds 
may produce new fall growth in stubble grain fields. To aid 
in suppressing these weeds, product may be applied at the 
rate of 2.5 pints per acre either alone or in combination with 
other registered herbicides. See 'Planting In Treated 
Areas' section. Follow more restrictive limitations for tank 
mix products used. 
Rice 
Apply 2025™ alone or as a tank mixture with other rice 
herbicides to emerged and rapidly growing weeds. Apply 
only in the late tillering stage of first joint development (first 
to second green ring), usually 6-9 weeks after emergence. 
Do not apply after internode elongation or panicle initiation. 
Do not apply at early seedling, early panicle boot 
flowering, or early heading growth stages. Before making 
applications of 20251M to rice, consult local Extension or 
University specialiSts for appropriate rates and timing of 
sprays. Do apply this product when conditions and 
application practices are favorable for drift. 
Post emergent; Pre-ffood 
Apply 2025™ at the rate of 2-4 pints per Acre. Applications 
should be made by ground equipment using a minimum of 
1 0 GPA. Aerial applications should apply a minimum of 3 
GP A. For optimum results, weeds should be no more than 
4 inches tall and rosettes less than 3 inches across. 
Post emergent; Rooded 
2025™ may be applied to rice and weeds following flood 
when 800k of the weeds are exposed. Apply at 2-6 pints 
per Acre in using a minimum of 10 GPA by ground or 3 
GPA by air. Follow all local and state restrictions that apply 
to 2,40 applications. 
FALLOW LAND 
Fallowland or land idle between crops may be subject to 
unwanted weed growth. For control of many annual 
broadleaf species, apply at the rate of 1- 2.5 pints per acre. 
To aid in suppressing certain perennial or biennial 
broadleaf weeds (including cotton regrowth), this product 
may be applied at the rate of 1-2.5 pints per acre either 
alone or in combination with other registered herbicides. 
Use the high rate on older plants, drought stressed plants 
or for hard to kill species. See 'Planting In Treated Areas' 
section. Follow more restrictive limitations for tank mix 
products used. 2025™ may be used to kill fall alfalfa 
stands in preparation for spring planting of row crops under 
conservation tillage. The treated alfalfa crop cannot be 
grazed, fed to livestock or cut for hay. 
Page 9 of 13

GRASS PASTURES 
To control many emerged broadleat weeds, apply 1.0- 2.5 
pints 2025™ per acre. Preferred timing is in the early 
spring when sufficient weeds have emerged, and when 
weeds are small and actively growing, but before weeds 
are too mature. Summer applications to older, drought· 
stressed weeds are less effective. However, weeds are 
more susceptible again in the fall when cooler, wetter 
conditions support active growth before a killing frost For 
fall treatment of mature weeds or perennial weed regrowth, 
use 2-3 pints per acre. Several seasons of spring plus fall 
treatments may be necessary to control certain perennials. 
Plant Response: Injury may result to bent grass, other 
'rm season or southern grasses, and alfalfa, clover or 
• 1er legumes. Do not use if this risk of injury is 
unacceptable. Clovers may recover from early spring 
applications. If grass seed production is desired, do not 
apply when grass is in boot to milk stage or after heading 
begins. Do not apply to newly seeded areas until grass is 
well established. Reseeding is not recommended for at 
, least 30 days following application. Addition of a surfactant 
may increase the risk of injury to newly seeded grasses. 
Livestock Feeding Restrictions: Do not graze dairy 
animals on treated areas within 7 days after application. 
Do not graze meat animals on treated areas within 3 days 
before slaughter. Do not cut treated grass for hay within 30 
nays of application. 
.iRASS SEED CROPS 
To control many emerged broadleaf weeds, apply 1- 2.5 
pints per acre. Use on established stands of cool season 
grass seed crops, such as bluegrass, fine fescue, tall 
fescues, orchard grass, annual ryegrass, and perennial 
ryegrass. Make applications in the spring from the tiller to 
early boot stage. Do not spray in boot stage. New spring 
seedings may be treated after the grasses have more than 
5 true leaves. On established stands that have had the 
seed crop removed, perennial weed regrowth may be 
treated in the fall at up to 3 pints per acre. Refer to 'Plant 
Response' and 'Livestock Feeding Restrictions' under 
GRASS PASTURES section above. 
\3jtv 
-----------------------------------RANGELAND PASTURES AND PERENNIAL 
GRASSLANDS NOT IN AGRICULTURAL PRODUCTION 
2025™ can be used to control or suppress a number of 
susceptible broadleat weeds in rangeland or perennial 
grasslands that are set aside from agricultural use such as 
in the Conservation Reserve Program (CRP) or similar 
government programs. Consult program rules to determine 
whether grass and hay may be used. For best results, 
apply when broadleat weeds are small. Adequate moisture 
is needed for best grass tolerance and weed control. 
Plant Response: Injury to legumes, bentgrass, and other 
warm season grasses is likely to occur. Grasses may be 
discolored following treatment If grass seed production is 
desired, do not apply when grass is in boot to milk stage or 
after heading begins . 
New Stands: Preseeding applications should be made at 
least 30 days prior to seeding. Newly seeded stands 
should only be treated after they are well established (more 
than 5 true leaves) or injury may occur. Apply 1 - 2 pints 
per acre when weeds are small and actively growing. 
Established Stands: For optimum results, weeds must be 
actively growing. Apply 2 • 2.5 pints per acre for annual 
weeds and up to 3 pints per acre for biennial or perennial 
weeds. Treat biennial weeds when they are in the seedling 
to rosette stage and before flower stalks become apparent 
Treat perennial weeds in the bud to bloom stage. For 
brush species in rangeland, apply up to 2 quarts per acre in 
an oil spray (see 'Mixing Instructions'). Another option is 
to add 1 gallon of oil per acre to a 2025™ water spray (see 
'Mixing Instructions'). Repeat applications in the same or 
subsequent year may be needed to control brush species. 
Livestock Feeding Restrictions: Do not graze dairy 
animals on treated areas within 7 days of application. Do 
not graze meat animals within 3 days of slaughter. Treated 
grass cut for hay should not be cut within 30 days of 
application. For government program grasslands, follow 
program grazing restrictions if more restrictive than those 
stated above. 
Page 10 of 13

ORNAMENTAL AND RECREATIONAL TURFGRASSES, 
LAWNS, GOLF COURSES (Fairways, Aprons, Tees, and 
Roughs), PARKS AND CEMETERIES 
This product is intended for use only by professional 
applicators and service technicians in established 
ornamentailawns and turfgrass. 
Apply only to established turf areas at times when weeds 
are actively growing but not flowering and are 1-4' in 
height Care must be taken to avoid spray drift on non­
targeted susceptible plants such as vegetables, 
ornamentals, shrubs, trees, flowers, and other desirable 
plants. Do not apply this product to bentgrass, Bermuda 
(hybrid), carpet grass, centipede, dichondra, Saint 
( 'gustine, or turf that contains desirable clovers. The 
\ :lfety of this product for turf applications may vary 
oetween grass species. 
Under some conditions a temporary discoloration may 
occur one to three days after application. Applications 
made with spray adjuvants and and/or liquid fertilizer may 
_ increase the potential for this discoloration. 
Note: Do not apply this product with adjuvants based on 
surfactants, wetting agents, or oils unless otherwise 
directed. 
Application Rate 
. 40ply 1 - 2 pint! Acre or 1/3 -1 oz per 1000 square feet 
I Jmperature and moisture extremes may affect the 
,Jerformance of this product Warm moist conditions may 
accelerate the performance of this product while cool 
conditions may increase the time before herbicide 
symptoms occur. Weeds hardened off by drought are less 
susceptible to this product and may require higher rates for 
control. 
The maximum application of this product to turf grass is 2.5 
pints per acre per application site. . 
Application Guidelines 
Thorough and uniform coverage are essential for weed 
control. Do not use flood nozzles, Raindrop®, or nozzle 
tips larger than 400 microns due to potential coverage 
problems. Applications should be made with spray volumes 
of 20-175 gallons per acre (1/2 to 4 gallons per 1000 
square feet) Use the higher spray volume range when 
weed populations are heavy and the grass canopy is 
dense. Spray application pressure should be maintained at 
20-40 psi. Do not apply this product in a manner or in 
conditions that favor drift 
FOREST MANAGEMENT (INCLUDING SITE PREP, 
FOREST ROADSIDES, BRUSH CONTROL) 
For the general control of annual, biennial and 
perennial broadleaf weeds and brush: Apply to emerged 
weeds and brush. For best results, treat when weeds and 
brush are young and actively growing. For broadcast 
applications apply no more than 4.0 Ibs, 2,4-D acid 
equivalent per acre per 12 months. 
For specific use-site applications and restrictions see 
the appropriate site-specific instructions as follows: 
Forest Site Preparation 
Bud break Spray: For control of alder, susceptible 
broadleaf weeds, and susceptible woody plants before 
planting forest seedlings, apply up to 2.0 gallons per acre 
in a minimum of 10 gallons spray mixture per acre. Apply 
as an water spray, oil spray, or water spray with oil (see 
"Mixing Instructions") after alder buds break, but before 
foliage is 1/4 full size. A water spray including 2 to 4 quarts 
per acre of diesel oil, fuel oil, stove oil, or crop oil 
concentrate may also be used. 
ANNUAL. BIENNIAL. PERENNIAL BROADLEAF WEEDS 
AND GENERAL BRUSH CONTROL 
Foliage Spray: To control seedlings and susceptible 
woody plants before planting forest apply up to 2.0 gallons 
per acre in a minimum of 10 gallons spray mixture per 
acre. If deSired, apply as a water spray including up to 1 
quart of diesel oil, fuel oil, stove oil, or crop oil concentrate 
per gallon of water (see "Mixing Instructions'). For best 
results, apply after alder foliage has reached full size. 
TREE AND BRUSH CONTROL (i.e., alder, ash, aspen, 
birch, black gum, cherry, elm, oak, sweet gum, tulip 
poplar, willow, and others) 
Basal Spray Treatment: Mix 1 - 2 gallons of 2025'" per 
100 gallons of diluent (may contain oil). Apply directly to 
base and root collar of all stems until the spray begins to 
accumulate at the ground line. Also wetting stems with this 
mixture may aid control. 
Page 11 of 13

Cut Surface Stumps: Mix 1 - 2 gallons of 2025T11 per 100 
gallons of diluent (may contain oil). Apply as soon as 
possible after curing trees. Thoroughly soak the entire 
stump with 2,4-0 mixture. Also treat exposed roots and 
bark. 
Frill: Mix 1 - 2 gallons of 2025T11 per 100 gallons of diluent 
(may contain oil). Make frills with an axe or other tool that 
can cut overlapping v-shaped notches through the bark in a 
continuous ring il"ound the base of the tree. Treat freshly 
cut frills with as much 2025™ mixture as they will hold. 
Injection: Make injections as near to the root collar as 
possible, using one injection per inch of trunk dbh (4 Yo 
(~"lt) for resistant species such as hickory. Injections 
( .auld overlap. For best results, injections should be 
-.,lade during the growing season (May 15th through 
October 15th in many Cl"eas). The injection bit must 
penetrate the bark. Apply 2-4 ml of 2025T11 per injection 
site. 
Forest Roadsides: To control susceptible broadleaf 
weeds and woody plants on forest roadsides, apply 0.5 -
1.5 gallons per acre in a minimum of 10 gallons spray 
mixture per acre. Apply as a water spray and, if desired, 
include up to 3 quarts per acre of diesel oil, fuel oil, stove 
oil, or crop oil concentrate (see 'Mixing Instructions'). 
Apply when sufficient foliage is present for absorption. 
C ltablished Conifers (including Christmas trees): 
( iirected Spray or Spot Spray: To control susceptible 
broadleaf weeds, mix up to 1.0 gallon per 100 gallons of 
water and apply to emerged weeds in the spring with 
ground equipment Avoid contacting conifer foliage with 
spray or drift as injury may result For brush, mix 2.0 
gallons per 100 gallons of water. Thoroughly spray brush 
in full fOliage, but avoid contacting conifer foliage with spray 
or drift. Do not apply more than the equivalent of 2.0 
gallons per acre. : 
ROADSIDES; MEDIANS; HIGHWAY, RAILROAD, 
UTILITY AND PIPELINE RIGHTS·OF·WAY; VACANT 
LOTS; AROUND UTILITY INSTALLATIONS, 
TRANSFORMERS, PUMP HOUSES, AND BUILDINGS; 
STORAGE AREAS; FENCES; GUARDRAILS; LUMBER 
YARDS; INDUSTRIAL SITES; AIRPORTS; TANK 
FARMS; FARMSTEADS; AND SIMILAR NON CROP 
AREAS 
For control of many broad leaf weeds and small woody 
plants, apply Yo - 3 pints per acre. Use the high rate for 
woody plants. Applications may be as broadcast sprays, 
small area sprays, or spot treatments. For small areas or 
spot spraying, use 0.5 pints per gallon of water and spray 
weeds to runoff. Regardless of the method of application, 
use adequate spray volume for full coverage of weeds. 
Timing: Preferred application timing is in the early spring 
when sufficient weeds have emerged, and when weeds are 
small and actively growing, but before weeds are too 
mature. 
Summer Application: Summer applications to older, 
drought-stressed weeds are less effective. However, 
weeds are more susceptible again in the fall when cooler, 
wetter conditions support active growth before a killing 
frost 
Fall Treatment: For fall treatment of mature weeds or 
perennial weed regrowth, use up to 1 - 3 pints per acre. 
Several seasons of spring plus fall treatments may be 
necessary to control certain perennials. Use of oil sprays 
or the addition of spray adjuvants improves weed control, 
but also increases the risk of damage to desirable ground 
covers. 
Plant Response: Bent grass, other warm season or 
southern grasses, alfalfa, clover or other legumes may be 
killed or injured. Do not apply when grass is in boot to milk 
stage, or after heading begins, if grass production is 
desired. Do not apply to newly seeded areas until grass is 
well established. Reseeding is not recommended for at 
least 30 days following application. 
CONDITIONS OF SALE - LIMITED WARRANTY 
AND LIMITATIONS OF LIABILITY AND REMEDIES 
Read the Conditions of Sale - Warranty and Limitations 
of Liability and Remedies before using this product If 
the terms are not acceptable, return the product, 
unopened, and the full purchase price will be refunded. 
The directions on this label are believed to be reliable and 
should be followed carefully. Insufficient control of pests 
and/or injury to the crop to which the product is applied 
may result from the occurrence of extraordinary or unusual 
weather conditions or the failure to follow the label 
directions or good application practices, all of which are 
Page 12 of 13

J 
• 
beyond the control of Helena Chemical Company (the 
'Companyj or seller. In addition, failure to follow label 
directions may cause injury to crops, animals, man or the 
environment The Company warrants that this product 
conforms to the chemical description on the label and is 
reasonably fit for the purpose referred to in the directions 
for use subject to the factors noted above which are 
beyond the control of the Company. The Company makes 
no other warranties or representations of any kind, express 
or implied, concerning the product. including no implied 
warranty of merchantability or fitness for any particular 
purpose, and no such warranty shall be implied by law. 
The exclusive remedy against the Company for any cause 
f ,- < action relating to the handling or use of this product shall 
( : • limited to, at Helena Chemical Company's election, one 
. Jf the following: 
1. Refund of the purchase price paid by buyer or user 
for product bought or 
2. Replacement of the product used 
To the extent allowed by law, the Company shall not be 
liable and any and all claims against the Company are 
waived for special, indirect. inCidental, or consequential 
damages or expense of any nature, including, but not 
limited to, loss of profits or income. The Company and the 
seller offer this product and the buyer and user accept it, 
_.subject to the foregoing conditions of sale and limitation of 
( .. 'Irranty, liability and remedies. 
( ) Copyright Helena Chemical Company, 2004. 
WipeOut®, -Trademark of Helena Chemical Company. 
Raindrop® -Trademark of Delevan Corporation. 
:. 
-------- ------
Page 13 of 13