crop-chem-docs/corpus/bayer/warrant-ultra.md

# Warrant Ultra Herbicide

- **Product class:** herbicide
- **EPA Reg No:** 524-620
- **Active ingredients:** Sodium salt of fomesafen, Acetochlor
- **Source:** https://www.cropscience.bayer.us/crop-protection/herbicide/warrant-ultra-herbicide
- **Label PDF:** https://cs-assets.bayer.com/is/content/bayer/Warrant_Ultra_Herbicide_Bayer_Label1tupdf

---

US62219767D (250128D) Warrant Ultra MINI BULK ECL
Color: CMYK Date:
 08/20/2025
(Label Coordinator: Mark Schmidt)
GROUP
GROUP
ACETOCHLOR
FOMESAFEN
HERBICIDE
HERBICIDE
15
14
Packed for:
Bayer CropScience LP
800 N. Lindbergh Blvd.
St. Louis, Missouri, 63167 USA
Warrant Ultra Herbicide is a registered trademark of Bayer Group.
©2025 Bayer Group. All rights reserved.
Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk
Counties of New York State.
Warrant® Ultra is a herbicide for weed control in Soybeans and Cotton.
ACTIVE INGREDIENTS:
*Acetochlor
 ..............................................................................................................
 30.2%
**Fomesafen, sodium salt
 .........................................................................................
7.1%
OTHER INGREDIENTS

....................................................................................................  62.7%
100.0%
*Contains 2.82 pounds/gallon or 338 g
rams/liter of
2-chloro-N-ethoxymethyl-N-(2-ethyl-6-methylphenyl) acetamide.
**Contains equivalent to 6.72% or 0.63 pounds/gallon or 75 grams/liter of fomesafen active
ingredient (5-[2-chloro-4-(trifluoromethyl)phenoxy]-N-(methylsulfonyl)-2-nitrobenzamide)#
*CAS#: 34256-82-1  **CAS#: 108731-70-0   #CAS#: 72178-02-0
This product is protected by U.S. Patent No. 5,925,595. Other patent(s) pending. No license
is granted under any non-U.S. patent(s).
EPA Reg. No. 524-620
KEEP OUT OF REACH OF CHILDREN
DANGER/PELIGRO
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If
you do not understand the label, find someone to explain it to you in detail.)
See label booklet for complete Directions for Use.
RECIRCULATE OR MIX TO ENSURE UNIFORM DISPERSION BEFORE
TRANSFER FROM TANK
FOR PRODUCT INFORMATION OR ASSISTANCE IN USING THIS PRODUCT,
CALL TOLL-FREE, 1-866-99BAYER (1-866-992-2937)
IN CASE OF AN EMERGENCY INVOLVING THIS HERBICIDE PRODUCT, OR FOR MEDICAL
ASSISTANCE, CALL COLLECT, DAY OR NIGHT, 1-800-334-7577
US62219767D        250128D    08/25
Herbicide
Escanee el código QR para español
Scan QR Code for Spanish
Net Contents:
6.875”
7.125”
6.875”
6.625”
COPY AREA
COPY AREA

1
Read the entire label before using this product.
Carefully follow detailed instructions in the label booklet.
Use only according to label instructions.
Read “LIMIT OF WARRANTY AND LIABILITY” which appears in the
label booklet or pamphlet, before buying or using. If terms are not
acceptable, return at once unopened.
CONTENTS
1 1.0  IMPOR TANT PHONE NUMBERS  ................................ 1
2 2.0  PREC AUTIONARY STATEMENTS  .............................. 1
2.1
 Hazar
ds to Humans and Domestic Animals

............. 1
2.2
 Environmental Hazar
ds

............................................ 1
3 3.0  DIRECTIONS FOR USE  .............................................. 1
3.1
 Stor
age and Disposal

............................................... 2
4 4.0  PRODUCT INFORMA TION  ......................................... 2
4.1
 Use Restrictions

....................................................... 2
4.2
 Application Dir
ections

............................................. 3
4.3
 Cultiv
ation Information

............................................ 3
4.4
 Use Rates

................................................................. 3
4.5
 Ar
ea Use Map........................................................... 3
4.6
 Rotational Crops

...................................................... 4
 4.7

Replanting

................................................................ 4
5 5.0  WEED RESIST ANCE MANAGEMENT  ......................... 4
6 6.0  SOIL TEXTURE  ......................................................... 4
7 7.0  MIXING, SPRAYING AND HANDLING INSTRUCTIONS. . . . . .4
7.1  Equipment Cleaning & Repair  .................................. 4
7.2
 Spr
ayer Compatibility

.............................................. 4
7.3
 Spr
ay Additives

........................................................ 5
8 8.0  APPLIC ATION SYSTEMS  .......................................... 5
8.1
 Ground
Broadcast Treatment
 ................................... 5
8.2
 Aerial
Application Equipment

................................... 5
9 9.0  WEEDS CONTROLLED  .............................................. 6
9.1
 Annual Gr
asses

........................................................ 6
9.2
 Annual Broadlea
ves

................................................. 6
9.3
 Emerged Weeds Controlled by Warrant® Ultra Herbicide ....6
10 10.0  CO TTON   ................................................................... 6

10.1
 Preplant, At-Planting, and Preemergence Applications ... 6
1
0.2 W
arrant Ultra Herbicide Tank Mixes for Preplant Surface
or
Preemergence Application................................... 7
10.3
 Post-Dir
ected Application (All Soil Types)
 ................ 7
10.4
 T
ank Mixes for Post-Directed Application
 ................ 7
10.5
 Product Use Restrictions - Cotton
 ............................ 7
11 11.0  SO YBEANS  ............................................................... 7

11.1
 Preplant, At-Planting, and Preemergence Applications ... 7
11.2
 W
arrant Ultra Tank Mixes for Preplant, At-planting,
or Pr
eemergence Surface Application
 ..................... 8

11.3
 Warrant Ultra Herbicide Postemergence Application ......8
11.4  W arrant Ultra Herbicide Tank-Mixtures for Soybeans
Postemer
gence Application

..................................... 8
1
1.5 W
arrant Ultra Herbicide plus Roundup ® Agricultural
Herbicides on Roundup Read
y® Soybeans and
Roundup Read
y 2 Yield® Soybeans .......................... 8
11.6
 Product Use Restrictions – So
ybeans
 ...................... 8
12 12.0  LIMIT OF W ARRANTY AND LIABILITY  ..................... 8
1.0 IMPOR TANT PHONE NUMBERS
1. FOR PRODUCT INFORMATION OR ASSISTANCE IN USING THIS
PRODUCT, CALL TOLL-FREE, 1-866-99BAYER
(1-866-992-2937)
2. IN CASE OF AN EMERGENCY INVOLVING THIS HERBICIDE PRODUCT,
OR FOR MEDICAL ASSISTANCE, CALL COLLECT, DAY OR NIGHT,
1-800-334-7577
2.0 PREC AUTIONARY STATEMENTS
2.1 Hazards to Humans and Domestic Animals
Si usted no entiende la etiqueta, busque a alguien para que se la
explique a usted en detalle. (If you do not understand the label, find
someone to explain it to you in detail.)
KEEP OUT OF REACH OF CHILDREN
DANGER/PELIGRO
CAUSES IRREVERSIBLE EYE DAMAGE. Do not get in eyes, on skin,
or on clothing. Wear protective eyewear. Prolonged or frequently
repeated skin contact may cause allergic reactions in some
individuals. Remove contaminated clothing and wash before reuse.
Wash thoroughly with soap and water after handling and before
eating, drinking, chewing gum, using tobacco or using the toilet.
FIRST AID: Call a poison control center or doctor for treatment
advice
IF IN EYES •  Hold ey e open and rinse slowly and gently with
water for 15-20 minutes.
•
 Remo
ve contact lenses, if present, after the first
5 minutes, then continue rinsing.
•
 Call a poison control center or doctor for
tr
eatment advice.
IF ON SKIN
OR CLOTHING
•
 T
ake off contaminated clothing.
•
 Rinse skin immediately with plenty of w
ater for
15-20 minutes.
•
 Call a poison control center or doctor for
tr
eatment advice.
IF
SWALLOWED
•
 Call a poison control center or doctor
immediately for tr
eatment advice.
•
 Ha
ve person sip a glass of water if able to
swallow.
•
 Do not i
nduce vomiting unless told to by a
poison control center or doctor.
•
 Do not give anything b
y mouth to an
unconscious person.
NOTE TO PHYSICIAN
Probable mucosal damage may contraindicate the use of
gastric lavage
• H
ave the product container or label with you when calling a
poison control center or doctor, or going for treatment.
• Y
ou may also contact 1-800-334-7577, collect day or night, for
emergency medical treatment information.
• This product is identified as
Warrant Ultra Herbicide, EPA
Registration No. 524-620.
Personal Protective Equipment (PPE):
Applicators and other handlers must wear: protective eyewear
(goggles, face shield, or safety glasses), longsleeved shirt and long
pants, and shoes plus socks.
Discard clothing and other absorbent materials that have been drenched
or heavily contaminated with this product’s concentrate. Do not reuse
them. Follow manufacturer’s instructions for cleaning/maintaining PPE.
If no such instructions for washables exist, use detergent and hot water.
Keep and wash PPE separately from other laundry.
Engineering Controls: When handlers use closed systems, or
enclosed cabs in a manner that meets the requirements listed in
the Worker Protection Standard (WPS) for agricultural pesticides
40 CFR 170.240(d)(4-6), the handler PPE requirements may be
reduced or modified as specified in the WPS.
User Safety Recommendations:
Users should:
•
 W
ash hands before eating, drinking, chewing gum, using
tobacco or using the toilet.
•
 Remo
ve clothing/PPE immediately if pesticide gets inside.
Then wash thoroughly and put on clean clothing.
•
 Remo
ve PPE immediately after handling this product. As soon
as possible, wash thoroughly and change into clean clothing.
2.2 Environmental Hazards
NON-TARGET ORGANISM ADVISORY: This product is toxic to plants
and may adversely impact the forage and habitat of non-target
organisms, including pollinators, in areas adjacent to the treated
site. Protect the forage and habitat of non-target organisms by
following label directions intended to minimize spray drift.
Drift and runoff may be hazardous to aquatic organisms in water
adjacent to treated areas.
SURFACE WATER ADVISORY: This product may impact surface
water quality due to runoff of rainwater. This is especially true
for poorly draining soils and soils with shallow ground water. This
product is classified as having high potential for reaching surface
water via runoff for several months after application.
A level, well-maintained vegetative buffer strip between areas
to which this product is applied and surface water features such
as ponds, streams, and springs will reduce the potential loading
of this product from runoff water and sediment. Runoff of this
product will be reduced by avoiding applications when rainfall or
irrigation is expected to occur within 48 hours.
This product is toxic to fish.
For Terrestrial Uses: Do not apply directly to water, or to areas
where surface water is present or to intertidal areas below the
mean high water mark. Do not contaminate water when disposing
of equipment wash water or rinsate. Do not apply when weather
conditions favor drift from target area.
GROUNDWATER ADVISORY: This product is known to leach through
soil into groundwater under certain conditions as a result of label
use. This chemical may leach into groundwater if used in areas where
soils are permeable, particularly where the water table is shallow.
NOTICE: Read the entire Directions for Use and Conditions of Sale
and Limitation of Warranty and Liability before buying or using this
product.
3.0......DIRECTIONS FOR USE
It is a violation of Federal law to use this product in any manner
inconsistent with its labeling. This product can only be used in
accordance with the Directions for Use on this label.
Do not apply this product in a way that will contact workers or
other persons, either directly or through drift. Only protected
handlers may be in the area during application. For any
requirements specific to your State or Tribe, consult the agency
responsible for pesticide regulation.
Not for Sale, Sale Into, Distribution and/or Use in Nassau and
Suffolk Counties of New York State.
7.125”
6.875”
6.495”
COPY AREA
COPY AREA
6.625”

2
Agricultural Use Requirements
Use this product only in accordance with its labeling and with
the Worker Protection Standard, 40 CFR part 170. This Standard
contains requirements for the protection of agricultural workers
on farms, forests, nurseries, and greenhouses, and handlers of
agricultural pesticides. It contains requirements for training,
decontamination, notification and emergency assistance. It also
contains specific instructions and exceptions pertaining to the
statements on this label about personal protective equipment
(PPE) and restricted-entry interval. The requirements in this box
only apply to uses of this product that are covered by the Worker
Protection Standard.
Do not enter or allow worker entry into treated areas during
the restricted entry interval (REI) of 24 hours. Exception: if
the product is soil-injected or soil-incorporated, the Worker
Protection Standard, under certain circumstances, allows
workers to enter the treated area if there will be no contact with
anything that has been treated.
PPE required for early entry to treated areas that is permitted
under the Worker Protection Standard and that involves contact
with anything that has been treated, such as plants, soil, or
water, are: coveralls, waterproof gloves, and shoes plus socks.
3.1  STORAGE AND DISPOSAL
Do not allow this product to contaminate water, foodstuffs, feed
or seed by storage or disposal.
PESTICIDE STORAGE: Store pesticides away from food, pet food,
feed, seed, fertilizers, and veterinary supplies. Keep container
closed to prevent spills and contamination. If product freezes,
return to room temperature and agitate to reconstitute. In case
of spill or leak on floor or paved surfaces, soak up with sand,
earth or synthetic absorbent. Remove to chemical waste area.
PESTICIDE DISPOSAL. To avoid wastes, use all material in
this container, including rinsate, by application in accordance
with label directions. If wastes cannot be avoided, offer
remaining product to a waste disposal facility or pesticide
disposal program. Such programs are often run by state or
local governments or by industry. All disposal must be in
accordance with applicable federal, state and local regulations
and procedures.
CONTAINER HANDLING AND DISPOSAL:
Nonrefillable container. Do not reuse this container to hold
materials other than pesticides or dilute pesticides (rinsate).
After emptying and cleaning, it may be allowable to temporarily
hold rinsate or other pesticide-related materials in the
container. Contact your state regulatory agency to determine
allowable practices in your state.
Nonrefillable container. Do not reuse or refill this container.
Triple rinse or pressure rinse (or equivalent) this container
promptly after emptying.
Triple rinse as follows: Empty the remaining contents into
application equipment or a mix tank and drain for 10 seconds
after the flow begins to drip. Fill the container 1/4 full with
water and recap. Shake for 10 seconds. Pour rinsate into
application equipment or a mix tank or store rinsate for later
use or disposal. Drain for 10 seconds after the flow begins to
drip. Repeat this procedure two more times.
Pressure rinse as follows: Empty the remaining contents into
application equipment or a mix tank and continue to drain
for 10 seconds after the flow begins to drip. Hold container
upside down over application equipment or mix tank or
collect rinsate for later use or disposal. Insert pressure
rinsing nozzle in the side of the container, and rinse at about
40 PSI for at least 30 seconds. Drain for 10 seconds after the
flow begins to drip.
Once properly rinsed, some agricultural plastic pesticide
containers can be taken to a container collection site or
picked up for recycling. To find the nearest site, contact your
chemical dealer or Bayer CropScience LP at 1-866-99BAYER
(1-866-992-2937). If recycling is not available, dispose of
in accordance with federal, state, and local regulations and
procedures, which may include puncturing the properly rinsed
container and disposing in a sanitary landfill.
Refillable container. Refill this container with pesticide only. Do
not reuse this container for any other purpose.
Cleaning this container before refilling is the responsibility of
the refiller. Cleaning this container before final disposal is the
responsibility of the person disposing of the container.
To clean this container before final disposal, empty the remaining
contents from this container into application equipment or a tank
mix. Fill the container about 10 percent full with water. Agitate
vigorously or recirculate water with the pump for 2 minutes. Pour
or pump rinsate into application equipment or rinsate collection
system. Repeat this rinsing procedure two more times. Then offer
this container for recycling, if available. To obtain infor
mation
about recycling refillable containers, contact Bayer CropScience LP
at 1-866-99BAYER (1-866-992-2937).
4.0 PRODUCT INFORMA TION
Warrant Ultra Herbicide is used to control or to reduce competition
from the annual grasses and broadleaf weeds listed in the “WEEDS
CONTROLLED” section of this label. Warrant Ultra Herbicide may be
applied as a preplant surface, preemergence, or postemergence
treatment.
Read and carefully observe precautionary statements and all
other information appearing on the labeling of all products used in
mixtures and sequential treatments.
4.1 Use Restrictions
Not for Sale, Sale Into, Distribution and/or Use in Nassau and
Suffolk Counties of New York State.
This chemical demonstrates the properties and characteristics
associated with chemicals detected in groundwater. The use of this
chemical in areas where soils are permeable, particularly where the
groundwater is shallow, may result in groundwater contamination.
On the following soil types, do not apply this product within 50 feet
of any well where the depth to groundwater is 30 feet or less: sands
with less than 3 percent organic matter; loamy sands with less than
2 percent organic matter; or sandy loams with less than 1 percent
organic matter. See the figure for additional clarification.
This product may not be mixed or loaded within 50 feet of any wells
(including abandoned wells and drainage wells), sink holes, perennial
or intermittent streams and rivers, and natural or impounded lakes and
reservoirs. This setback does not apply to properly capped or plugged
abandoned wells and does not apply to impervious pad or properly
diked mixing/loading areas.
Operations that involve mixing, loading, rinsing, or washing of this
product into or from pesticide handling or application equipment or
containers within 50 feet of any well are prohibited unless conducted
on an impervious pad constructed to withstand the weight of the
heaviest load that may be positioned on or moved across the pad.
Such a pad shall be designed and maintained to contain any product
spills or equipment leaks, container or equipment rinse or washwater,
and rainwater that may fall on pad. Surface water shall not be allowed
to either flow over or from the pad, which means the pad must be
self-contained. The pad shall be sloped to facilitate material removal.
An unroofed pad shall be of sufficient capacity to contain a minimum
of 110 percent of the capacity of the largest pesticide container or
application equipment on the pad. A pad that is covered by a roof of
sufficient size to completely exclude precipitation from contact with
the pad shall have a minimum containment capacity of 100 percent
of the capacity of the largest pesticide container or application
equipment on the pad. Containment capacities as described above
shall be maintained at all times. The above specified minimum
containment capacities do not apply to vehicles when delivering
pesticide shipments to the mixing/loading site. States may have in
effect additional requirements regarding wellhead setbacks and
operational containment.
7.125”
6.875”
6.495”
COPY AREA
COPY AREA
6.625”

3
Do not flood irrigate to apply or incorporate this product.
Product must be used in a manner which will prevent back
siphoning into wells, spills or improper disposal of excess
pesticide, spray mixtures or rinsates.
Disposal of excess pesticide, spray mixtures or rinsate must
be according to label use instructions or according to the State
Pesticide or Environmental Control Agency or the Hazardous Waste
representative at the nearest EPA regional office.
Do not apply under conditions which favor runoff or wind erosion of
soil containing this product to non-target areas. To prevent off-site
movement due to runoff or wind erosion:
Do not apply to impervious substrates such as paved or highly
compacted surfaces or frozen or snow covered soils.
Do not use tailwater from the first flood or furrow irrigation of
treated fields to treat non-target crops unless at least 1/2 inch of
rainfall has occurred between application and the first irrigation.
Do not apply when wind conditions favor drift to non-target sites.
To minimize spray drift to non-target areas: Use low-pressure
application equipment capable of producing a large droplet spray.
Do not use nozzles that produce a fine droplet spray. Minimize drift
by using sufficient spray volume to ensure adequate coverage with
large droplet size sprays.
Do not make ground application during temperature inversions.
4.2 Application Directions:
Use a minimum of 10 gallons per acre. Nozzle selection should
meet manufacturer’s gallonage and pressure recommendations
for preplant surface or preemergence applications when used as
such. Precipitation or overhead sprinkler irrigation is required after
application to activate herbicide for effective residual control. The
amount of precipitation or irrigation required depends on existing soil
moisture, soil type and percent organic matter content, but 1/2 inch
is normally adequate. If activation of Warrant Ultra herbicide does not
occur by rainfall or irrigation, weeds may emerge and other control
measures will need to be implemented.
For post-emergent application of Warrant Ultra Herbicide use a minimum
of 15 gallons per acre and treat emerged weeds early before exceeding
four inches in height unless otherwise noted in Table 9.3. Nozzles
producing extremely-coarse to ultra-coarse spray droplets may not
provide sufficient coverage of emerged weeds resulting in reduced
efficacy. To provide adequate coverage, it is recommended that ground
speed not exceed 10 mph during application.
If rainfall occurs within one hour after application of Warrant
Ultra Herbicide post-emergence weed control may be reduced.
Precipitation or overhead sprinkler irrigation is required after
application to activate herbicide for effective residual control.
Avoid treating powdery dry or light sandy soils when conditions
are favorable for wind erosion. Under these conditions, the soil
surface should first be settled by rainfall or irrigation.
Avoid overlapping spray swaths, as injury may occur to rotational crops.
Use of this product not consistent with this label may result in injury
to persons, animals or crops, or other unintended consequences.
4.3 Cultivation Information
Dry weather may reduce effectiveness of this product. Cultivation may
be necessary if activation does not occur soon after application. If
cultivation is desired, delay cultivation after application for as long as
possible since cultivation disturbs soil and herbicide barrier. Shallowly
cultivate or rotary hoe immediately if weeds or grasses emerge. If
cultivation is necessary because of soil crusting or compaction, set
equipment shallow and minimize lateral soil movement to avoid
dilution or displacement of the herbicide treatment.
4.4 Use Rates for Warrant Ultra Herbicide
4.4.1 Volume to Weight Conversions for
 Warrant Ultra Herbicide
 70 fl oz. of Warrant Ultra Herbicide contains 1.54 lb acetochlor
and 0.34 lb fomesafen.
 60 fl oz. of Warrant Ultra Herbicide contains 1.32 lb acetochlor
and 0.30 lb fomesafen.
 50 fl oz. of Warrant Ultra Herbicide contains 1.10 lb acetochlor
and 0.25 lb fomesafen
 48 fl oz. of Warrant Ultra Herbicide contains 1.06 lb acetochlor
and 0.24 lb fomesafen.
4.4.2 Maximum Annual Use Rates for
 Warrant Ultra Herbicide
Maximum Annual Use Rates for Acetochlor:
A maximum of 3 lb. a.i./A of acetochlor from any product or
combination of products containing acetochlor may be applied
per acre per year in any Area where acetochlor is labeled.
Maximum Annual Use Rates for Fomesafen:
Area 1: A maximum of 70 fl oz. of Warrant Ultra Herbicide (or
a maximum of 0.34 Ib. a.i./A of fomesafen from any product
containing fomesafen) may be applied per acre per year (see
Area Use Map).
Area 2: A maximum of 70 fl oz. of Warrant Ultra Herbicide (or
a maximum of 0.34 Ib. a.i./A of fomesafen from any product
containing fomesafen) may be applied per acre in ALTERNATE
years (see Area Use Map).
Area 3: A maximum of 60 fl oz. of Warrant Ultra Herbicide (or
a maximum of 0.30 Ib. a.i./A of fomesafen from any product
containing fomesafen) may be applied per acre in ALTERNATE
years (see Area Use Map).
Area 4: A maximum of 48 fl oz. of Warrant Ultra Herbicide (or
a maximum of 0.24 Ib. a.i./A of fomesafen from any product
containing fomesafen) may be applied per acre in ALTERNATE
years (see Area Use Map).
4.5 Area Use Map
Area 1 (Maximum Rate 70 fl oz./A per year): Includes the following
states or portion of states where Warrant Ultra Herbicide may be
applied: Alabama, Arkansas, Georgia, Louisiana, Mississippi,
Missouri (counties of Bellinger, Butler, Cape Giradeau, Dunklin,
Madison, Mississippi, New Madrid, Pemiscot, Perry, Ripley, Scott,
Stoddard and Wayne), North Carolina, Oklahoma (East of U.S.
Highway 75 and East of Indian Nation Parkway), South Carolina,
Tennessee, and Texas (includes area East of U.S. Highway 77 to
State Road 239 including all of Calhoun County).
Area 2 (Maximum Rate 70 fl oz./A per year): Includes the
following states or portion of states where Warrant Ultra Herbicide
may be applied: Delaware, Kentucky, Maryland, Virginia, West
Virginia, South of Interstate 70 in the following states: Illinois,
Indiana and Ohio and all areas South of Interstate 80 to the
intersection of U.S. Highway 15 and East of U.S. Highway 15 and
U.S. Highway 522 in Pennsylvania.
Area 3 (Maximum Rate 60 fl oz./A per year): Includes the following
states or portion of states where Warrant Ultra Herbicide may be
applied: Connecticut, Iowa, Maine, Massachusetts, Missouri (all
counties except for those listed in Area 1), New Jersey, New York
(except in Suffolk and Nassau Counties), Pennsylvania (all areas
except those listed in Area 2), Rhode Island, Vermont and Wisconsin
(South of U.S. Highway 18 between Prairie Du Chien and Madison,
and South of Interstate 94 between Madison and Milwaukee), and
North of Interstate 70 in following states: Indiana, Illinois and Ohio.
Area 4 (Maximum Rate 48 fl oz./A per year): Includes the following
states or portion of states where Warrant Ultra Herbicide may be
applied: Kansas (all counties East of or intersected by U.S. Highway
281), Michigan (Southern Peninsula), Minnesota (all areas South of
Interstate 94), Nebraska (all counties East of or intersected by U.S.
Highway 281), and Wisconsin (all areas, except those in Area 3, South
of Interstate 94 from Minnesota state line to Eau Claire and South of
U.S. Highway 29 from Eau Claire to Green Bay plus Barron, Chippewa,
Clark, Door, Dunn, Eau Claire, Kewaunee, Marathon, Menominee,
Oconto, Polk, Shawano, and St. Croix counties. The following
counties are excluded: Adams, Marquette, Portage, Waupaca,
Waushara and Wood). North Dakota (all areas East of Interstate
29 from Fargo South to the South Dakota state line). South Dakota
Area 1
Area 2
Area 3
Area 4
7.125”
6.875”
6.495”
COPY AREA
COPY AREA
6.625”

4
(all areas East of Interstate 29 from the North Dakota state line to
Watertown, all areas East of Highway 81 from Watertown to Madison
and all areas East and South of State Road 34 and U.S. Highway 281
to the Nebraska state line).
4.6 Rotational Crops:
Do not rotate to food or feed crops other than those listed below
after application of Warrant Ultra herbicide at labeled rates.
1) Soybeans may be replanted immediately.
2) Cotton can be replanted after 1 month or immediately
according to uses in section 10.1.
3) Wheat may be planted after a minimum of 4 months.
4) Corn*, peanuts, peas, rice, seed corn may be planted after a
minimum of 10 months
5) To avoid crop injury do not plant alfalfa, sunflowers, sugar
beets, grain sorghum (milo)# within 18 months
6) Rotate the next season to the following crops: barley, oats,
and rye, teosinte, triticale, wild rice, dried shelled bean group
Lupinus spp. (including grain lupin, sweet lupin and white
lupin); Phaseolus spp. (includes field bean, kidney bean, lima
bean (dry), navy bean, pinto bean, tepary bean); bean Vigna
spp. (includes adzuki bean, blackeyed pea, catjang, cowpea,
Crowder pea, moth bean, mung bean, rice bean, southern pea
and urd bean); broad bean (dry) chickpea, guar, lablab bean,
lentil, pea (Pisum spp., includes field pea); pigeon pea.
7) Following harvest of crops treated with Warrant Ultra herbicide,
winter cover crops may be planted but not harvested or used
for food or animal feed for a minimum of 18 months following
last application of this product or any other product containing
acetochlor (such as Warrant Herbicide). Injury to cover crops
may occur.
*For popcorn use a 12 month minimum rotation interval in the
states of Ohio, Kentucky, Illinois, Indiana, Iowa, and Area 4 when
applied at rates of 48 fl oz. per acre or more. For sweet corn
use a minimum of 12 month in Area 3 and Area 4 except in the
following states Connecticut, Maine, Massachusetts, New York,
Rhode Island, and Vermont where 18 months is required.
#Sorghum may be planted back after 10 months in Area 1.
4.7 Replanting
If replanting is necessary in fields previously treated with Warrant
Ultra Herbicide, the field may be replanted to cotton, or soybeans.
When replanting, perform only a minimum of tillage required if
relying on  Warrant Ultra for residual weed control. Do not apply a
second application of Warrant Ultra Herbicide or other fomesafen
containing product as crop injury or illegal residues may occur
in harvested crops. If tank-mix combinations were used, refer to
product labels for any additional replanting instructions.
5.0 WEED RESISTANCE MANAGEMENT
For resistance management, please note that Warrant Ultra contains
both a Group 14 Fomesafen and a Group 15 Acetochlor herbicide.
Any weed population may contain plants naturally resistant to
Group 14 and/or Group 15 herbicides. The resistant individuals
may dominate the weed population if these herbicides are used
repeatedly in the same fields. Appropriate resistance-management
strategies should be followed.
To delay herbicide resistance, take one or more of the following
steps:
• Rotate the use of Warrant Ultra or other Group 14 or Group 15
herbicides within a growing season sequence or among growing
seasons with different herbicide groups that control the same
weeds in a field.
• Use tank mixtures with herbicides from a different group if such
use is permitted; where information on resistance in target
weed species is available, use the less resistance-prone partner
at a rate that will control the target weed(s) equally as well as
the more resistance-prone partner. Consult your local extension
service or certified crop advisor if you are unsure as to which
active ingredient is currently less prone to resistance.
• Adopt an integrated weed-management program for herbicide use
that includes scouting and uses historical information related to
herbicide use and crop rotation, and that considers tillage ( or other
mechanical control methods), cultural ( e.g., higher crop seeding
rates; precision fertilizer application method and timing to favor
the crop and not the weeds), biological (weed-competitive crops
or varieties) and other management practices.
• Scout after herbicide application to monitor weed populations
for early signs of resistance development. Indicators of possible
herbicide resistance include: (1) failure to control a weed species
normally controlled by the herbicide at the dose applied, especially
if control is achieved on adjacent weeds; (2) a spreading patch of
non-controlled plants of a particular weed species; (3) surviving
plants mixed with controlled individuals of the same species. If
resistance is suspected, prevent weed seed production in the
affected area by an alternative herbicide from a different group
or by a mechanical method including hoeing or tillage. Prevent
movement of resistant weed seeds to other fields by cleaning
harvesting and tillage equipment when moving between fields
and planting clean seed.
• If a weed pest population continues to progress after treatment
with this product, discontinue use of this product, and switch
to another management strategy or herbicide with a different
mode of action, if available.
• Contact your local extension specialist or certified crop
advisors for additional pesticide resistance-management and/
or integrated weed-management recommendations for specific
crops and weed biotypes.
• For further information or to report suspected resistance contact
Bayer CropScience at 1-866-99BAYER (1-866-992-2937).
You can also contact your pesticide distributor or university
extension specialist to report resistance.
6.0 SOIL TEXTURE
Applicators should evaluate soil conditions carefully to assure that
they choose the correct label rate.
The use rates of this product and the other herbicides labeled for
use in tank mixtures with this product vary with soil texture. Unless
soil texture is specifically named, rate tables throughout this label
refer to only three soil textural groups: coarse, medium and fine.
The following is a complete listing of soil textures included in each
of these three soil textural groups:
SOIL TEXTURAL GROUP SOIL TEXTURE
COARSE sand, loamy sand, sandy loam
MEDIUM loam, silt loam, silt, sandy clay loam
FINE silty clay loam, clay loam, sandy clay, silty
clay, clay
Refer to the above table to determine the corresponding soil
textural group for the soil to be treated.
7.0 MIXING, SPRAYING AND HANDLING
 INSTRUCTIONS
NOTE: Direct contact or exposure to this product or spray mixtures
of this product should be minimized. The following instructions
for transfer, mixing, cleaning or repairing equipment should
be followed in order to minimize this exposure. Review the
protective clothing requirements as listed in the “PRECAUTIONARY
STATEMENTS” section of this label and do not use this product
until you have the necessary protective clothing.
2.5 Gallon Containers
Open pouring from these containers can result in exposure from
splashing or spilling. Special care in lifting and pouring are
strongly recommended.
Bulk Containers
Open pouring from these containers can result in exposure from
splashing or spilling and is not recommended. This product should
be transferred from these containers to the mix or spray tank using
pumps or transfer probes. The probe or pump should not be removed
from the container or disconnected until the container is emptied
and rinsed. Use the pump or probe system to rinse the empty
container and transfer the rinsate directly to the mix or spray tank.
7.1 Equipment Cleaning & Repair
Cleaning and repair of transfer systems and application equipment
is a source of exposure to this product. Care should be taken to
minimize exposure during cleaning and repair of transfer systems
and application equipment. Whenever possible, these systems or
equipment should be rinsed before being cleaned or repaired.
Thoroughly clean the spray equipment before using Warrant Ultra
Herbicide. Maintain agitation throughout the spraying operation.
Do not allow spray mixture to stand overnight in the spray tank.
Flush the spray equipment thoroughly following each use. Triple
rinse sprayer with clean water after use.
When repairs must be made during transfer or application, the
equipment should be shut down, and special care taken to avoid
contact with the pesticide.
7.2 Sprayer Compatibility
Always predetermine the compatibility of this product or labeled
tank mixtures of this product with water carrier by mixing small
proportional quantities in advance. It is the pesticide user’s
responsibility to ensure that all products in the listed mixtures are
registered for the intended use. Users must follow the most restrictive
directions and precautionary language of the products in the mixture.
Mix this product or labeled tank mixture of this product with the
appropriate carrier as follows:
1. Place a 20- to 35-mesh screen or wetting basket over filling port.
2. Through the screen, fill the sprayer tank one-half full with the
appropriate carrier.
3. If a compatibility agent is necessary to improve mixing or to
prevent the formation of undesirable and unsprayable gels
or precipitates, while agitating add it to the carrier already
in the tank. Use only compatibility agents cleared by FDA for
this use. Read and follow all directions for use, cautionary
statements and all other information appearing on the selected
compatibility agent label. Check for adequate agitation.
4. If a wettable powder or dry flowable formulation is used, make
a slurry with water and add it slowly through the screen into the
tank. Continue agitation.
5. If a flowable formulation is used, add slowly through screen
into the tank. Mixing and compatibility may be improved when
flowable is pre-mixed one part flowable with one part water and
added to the tank in diluted form.
GROUP
GROUP
ACETOCHLOR
FOMESAFEN
HERBICIDE
HERBICIDE
15
14
7.125”
6.875”
6.495”
COPY AREA
COPY AREA
6.625”

5
6.
 Add this product slowly through the screen into the tank. Mixing
and compatibility may be improved when this product is prediluted
with two parts of water and added to the tank in diluted form.
7. Complete filling the spr ayer tank with carrier. If a Roundup ®
agricultural herbicide or a paraquat containing herbicide is
used, add the required amount near the end of the filling
process. Remove hose from tank immediately after filling to
avoid siphoning back into the carrier source.
Maintain good agitation at all times until the contents of the tank
are sprayed.
NOTE: If spray mixture is allowed to settle at any time, thorough
agitation is required to resuspend the mixture before spraying is
resumed. Keep by-pass line on or near bottom of tank to minimize
foaming. Screen size in nozzle or line strainers should be 50-mesh.
Carefully select proper nozzle to avoid spraying a fine mist. Check
for even distribution of spray droplets. To reduce loss of the chemical
due to drift of a fine mist, apply at nozzle pressures below 40 psi.
7.3 Spray Additives
No adjuvants are needed unless Warrant Ultra Herbicide is being
used to burndown emerged weeds.
For Postemergence Applications Add One Of The Following
Except in Tank Mix With Products Prohibiting Spray Additives:
Nonionic Surfactant (NIS) – Use NIS containing at least 75% surface
active agent at 0.25 to 0.5% v/v (1-2 qts./100 gals.) of the finished
spray volume.
Crop Oil Concentrate (COC) – Use a nonphytotoxic COC containing
15-20% approved emulsifier, at 0.5-1% v/v (0.5-1 gal./100 gals.)
of the finished spray volume. COC can improve weed control but
may reduce crop tolerance.
Methylated Seed Oil (MSO) – Use a nonphytotoxic MSO containing
60% methylated seed oil. Poor performance may result from the
use of MSO products containing less than 60% methylated seed
oil. MSO can improve weed control but may reduce crop tolerance.
Note: Reduced postemergence weed control for glyphosate
may result from tank mixtures with Warrant Ultra Herbicide,
and oil-based adjuvants.
8.0 Application Systems
Approved application systems:
8.1 Ground Broadcast T reatment
Ground: Broadcast boom
When applied preplant, at-planting, or preemergence in
soybeans or cotton this product will provide preemergence
control or reduced competition of the annual weeds listed in the
“WEEDS CONTROLLED” section of the label booklet for Warrant
Ultra Herbicide. If a non-listed weed is emerged at the time of
postemergence application, apply a labeled postemergence
herbicide to control the emerged weeds. Observe all directions
for use, precautions, and restrictions on the labeling of the
postemergence herbicide or residual herbicide.
Unless otherwise directed on this label or separately published
supplemental label of this product, apply this product and the
labeled tank mixtures in 10 or more gallons of solution per acre
using broadcast boom equipment.
8.2 Aerial Application Equipment:
Fixed-wing and helicopter
Unless otherwise prohibited, all applications described in the
label booklet for Warrant Ultra Herbicide, or other applications on
separately published supplemental labeling for this product, may
be made using aerial application equipment where appropriate,
provided that the applicator complies with the precautions and
restrictions specified on this label and in separate supplemental
labeling published for this product. Applications of this product
may be made using aerial application equipment in the following
listed states, or other listed states on separately published aerial
application supplemental labeling for this product, only:
Alabama, Arkansas, Georgia, Kansas, Kentucky, Louisiana,
Mississippi, Missouri, Nebraska, North Carolina, Oklahoma,
South Carolina, Tennessee, Texas, and Virginia
Do not apply Warrant Ultra using aerial equipment except under
conditions specified on this label or in separately published aerial
application supplemental labeling for this product.
Apply this herbicide at the appropriate rate as directed on this
label in 5 to 10 gallons of water per acre unless otherwise directed
on this label or in separate supplemental labeling or Fact Sheets
published for this product. Unless otherwise specified, do not
exceed the regional rate provided in the area use map of the
main label booklet for Warrant Ultra Herbicide when using aerial
application equipment. Refer to the individual use area sections
of the main label booklet for application rates, spray volumes
and additional use instructions. Review main label booklet for
approved tank mix partners. Ensure that the tank mix partner
product is approved for aerial application in your state or region.
Applicator must review use restrictions, maximum use rates and
the area use map on the main label booklet for Warrant Ultra
Herbicide. See crop-specific use restrictions for approved crops
on the main label booklet for Warrant Ultra Herbicide.
Ensure uniform application. To avoid streaked, uneven or
overlapped application, use appropriate marking devices.
MANDATORY SPRAY DRIFT MANAGEMENT
Aerial Applications:
• DO NO
T release spray at a height greater than 10 feet above
the ground or vegetative canopy unless a greater application
height is necessary for pilot safety.
• For applications prior to emer
gence of crops and target weeds,
applicators are required to use a Coarse or coarser droplet
size according to the most current version of the American
Society of Agricultural & Biological Engineers Standard 641
(ASABE S641).
•
For all other applications,
 applicators are required to use a
Medium or coarser droplet size according to the most current
version of the American Society of Agricultural & Biological
Engineers Standard 641 (ASABE S641).
•
If windspeed is 10 miles per hour or less,
 applicators must use
½ swath displacement upwind at the downwind edge of the
field. When the windspeed is between 11-15 miles per hour,
applicators must use ¾ swath displacement upwind at the
downwind edge of the field.
• DO NO T apply when wind speeds exceed 15 miles per hour at
the application site. If the windspeed is greater than 10 miles
per hour, the boom length must be 65% or less of the wingspan
for fixed wing aircraft and 75% or less of the rotor diameter for
helicopters. Otherwise, the boom length must be 75% or less
of the wingspan for fixed-wing aircraft and 90% or less of the
rotor diameter for helicopters.
• Nozzles must be oriented so the spr ay is directed toward the
back of the aircraft.
• DO NO
T apply during temperature inversions.
Ground Boom Applications:
•
 U
ser must only apply with the release height recommended by
the manufacturer, but no more than 3 feet above the ground
or crop canopy.
•
 For applications prior to emer
gence of crops and target
weeds, applicators are required to use a Coarse or coarser
droplet size according to the most current version of the
American Society of Agricultural & Biological Engineers
Standard 572 (ASAE S572).
•
 For all other applications,
 applicators are required to use a
Medium or coarser droplet size according to the most current
version of the American Society of Agricultural & Biological
Engineers Standard 572 (ASAE S572).
•
 DO NO
T apply when wind speeds exceed 15 mph at the
application site.
•
 DO NO
T apply during temperature inversions.
Spray Drift Advisories
•
 THE
APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE
SPRAY DRIFT.
•
 BE
AWARE OF NEARBY NON-TARGET SIDES AND ENVIRONMENTAL
CONDITIONS.
•
 IMPOR
TANCE OF DROPLET SIZE:
An effective way to reduce spray drift is to apply large droplets.
Use the largest droplets that provide target pest control. While
applying larger droplets will reduce spray drift, the potential for
drift will be greater if applications are made improperly or under
unfavorable environmental conditions.
Controlling Droplet Size – Ground Boom
° V olume – Increasing the spray volume so that larger droplets
are produced will reduce spray drift. Use the highest practical
spray volume for the application. If a greater spray volume is
needed, consider using a nozzle with a higher flow rate.
° Pressure - Use the lowest spray pressure recommended for
the nozzle to produce the target spray volume and droplet size.
° Spr ay Nozzle - Use a spray nozzle that is designed for the
intended application. Consider using nozzles designed to
reduce drift.
Controlling Droplet Size – Aircraft
° Adjust Nozzles – Follo w nozzle manufacturer’s directions for
setting up nozzles. Generally, to reduce fine droplets, nozzles
must be oriented parallel with the airflow in flight.
•
BOOM HEIGHT – Ground Boom
Fo
r ground equipment, the boom must remain level with the
crop and have minimal bounce.
• SHIELDED SPRA
YERS
S hielding the boom or individual nozzles can reduce spray drift.
Consider using shielded sprayers. Verify that the shields ar e not
interfering with the unifor
m deposition of the spray on the target area.
• TEMPERA TURE AND HUMIDITY
When making applications in hot and dr
y conditions, use larger
droplets to reduce effects of evaporation.
• TEMPERA
TURE INVERSIONS
Drift potential is high during a temper ature inversion.
Temperature inversions are characterized by increasing
temperature with altitude and are common on nights with limited
cloud cover and light to no wind. The presence of an inversion
can be indicated by ground fog or by the movement of smoke
from a ground source or an aircraft smoke generator. Smoke that
layers and moves laterally in a concentrated cloud (under low
wind conditions) indicates an inversion, while smoke that moves
upward and rapidly dissipates indicates good vertical air mixing.
A void applications during temperature inversions.
7.125”
6.875”
6.495”
COPY AREA
COPY AREA
6.625”

6
• WIND
 Drift potential generally increases with wind speed. AVOID
APPLICATIONS DURING GUSTY WIND CONDITIONS. Applicators
need to be familiar with local wind patterns and terrain that
could affect spray drift.
• Sensitive Areas
 Apply this product only when the potential for drift to adjacent
sensitive areas (e.g., residential areas, bodies of water, known
habitat for threatened or endangered species, non-target crops) is
minimal (e.g., when wind is blowing away from the sensitive areas).
 Avoid direct application to any body of water.
• Aircraft Maintenance
 Thoroughly wash aircraft, especially landing gear, after each
day of spraying to remove residues of this product accumulated
during spraying or from spills. PROLONGED EXPOSURE OF THIS
PRODUCT TO UNCOATED STEEL SURFACES COULD RESULT IN
CORROSION AND POSSIBLE FAILURE OF THE PART. LANDING
GEAR IS MOST SUSCEPTIBLE. The maintenance of an organic
coating (paint) that meets aerospace specification MIL-C-38413
can help prevent corrosion.
9.0 WEEDS CONTROLLED
When applied as directed under conditions described, this
product and tank mixtures of this product will control or reduce
competition from the weeds in sections 9.1 (Annual Grasses) and
9.2 (Annual Broadleaves) and section 9.3 (Emerged Weeds).
9.1 Annual Grasses
Annual Grasses Scientific Name
C = Control
R = Reduced
Competition
Barnyardgrass Echinocloa crus-galli C
Crabgrass Digitaria ischaemum C
Crowfootgrass Dactyloctenium
aegyptium (L.) Willd. C
Cupgrass, Prairie Eriochloa contracta Hitchc C
Cupgrass, Southwestern Eriochloa acuminate C
Foxtail
    Giant Setaria faberi C
    Green, Robust Purple,
    Robust White
Setaria viridis C
    Yellow Setaria lutescens C
Goosegrass Eleusine indica C
Johnsongrass, seedling Sorghum halepense R
Millet: Foxtail Setaria italic R
Oat, Wild Avena fatua R
Panicum
    Browntop Panicum fasciculatum C
    Fall Panicum dichotomiflorum C
    Texas Panicum texanum R
Rice, Red Oryza sativa C
Sandbur; Grassbur Cenchrus incertus R
Shattercane; Wild cane Sorghum bicolor R
Signalgrass, Broadleaf Brachiaria platyphylla C
Sprangletop, Red Leptochloa filiformis C
Wheat, Volunteer Triticum aestivum R
Witchgrass Panicum capillare L. C
9.2 Annual Broadleaves
Annual Broadleaves Scientific Name
C = Control
R = Reduced
Competition
Anoda, Spurred Anoda cristata R
Beggarweed, Florida Desmodium tortuosum R
Carpetweed Mollugo verticillata C
Cocklebur, Common Xanthium strumarium R
Croton, Tropic Croton glandulosus R
Ecliptia Eclipta prostrata C
Galinsoga Galinsoga spp. C
Groundcherry, Cutleaf Physalis angulata R
Henbit Lamium amplexicaule C
Morningglory, Smallflower Jacquemontia tamnifolia C
Morningglory spp. Ipomoea spp. R
Lambsquarters Chenopodium album C
Nightshade
    Black Solanum nigrum C
    Eastern Black Solanum ptycanthum C
    Hairy Solanum sarrachoides C
Pigweed: Carelessweed Amaranthus spp. C
Poinsettia, Wild Euphorbia heterophylla C
Purslane Portulaca oleracea C
Pusley, Florida Richardia scabra C
Ragweed
    Common Ambrosia artemisiifolia C
    Giant Ambrosia trifida R
Sida, Prickly; Teaweed Sida spinosa R
Smartweed Polygonum pensylvanicum C
Starbur, Bristly Acanthospermum hispidum R
Waterhemp
    Common Amaranthus rudis R
    Tall Amaranthus tuberculatus C
9.3 Emerged Weeds Controlled by
 Warrant Ultra Herbicide
Weed
Warrant Ultra Herbicide Rate (fl oz./A)
Maximum Growth Stage Controlled At
50 fl oz./A 60 fl oz./A
No. of True Leaves No. of True Leaves
Carpetweed 6" Diameter Size Multi-leaf 6" Diameter
Citron (Wild Watermelon) 2 2
Copperleaf, Hophornbeam 2 2
Copperleaf, Virginia 2 2
Crotalaria, Showy 4 4
Croton, Tropic 2 2
Cucumber, Volunteer 4 4
Eclipta 2 2
Groundcherry, Cutleaf 4 4
Horsenettleb 2c 3c
Jimsonweed 4 6
Ladysthumb 2 2
Lambsquarters, Commonc 2 2
Mexicanweed 2c 2c
Morningglory
    Cypressvine 4 4
    Entireleaf 2 2
    Ivyleaf 2 2
    Purple Moonflower 2 4
    Red (Scarlet) 2 2
    Smallflower 2 2
    Pitted (Smallwhite) 4 4
    Tall (Common) 2 2
    Palmleaf (Willowleaf) 2 2
Mustard, Wild 4 6
Nightshade, Black 4 4
Pigweed
    Amaranth, Palmer 4 4
    Amaranth, Spiny 2 2
    Red root 4 6
    Smooth 4 4
Purslane, Common Multi-Leaf 6" Diameter Multi-Leaf 6" Diameter
Ragweed, Common 4 4
Ragweed, Giantb -- 4
Sesbania, Hemp 6 6
Smartweed, Pennsylvania 4 4
Starbur, Bristly 2 2
Venice Mallow 4 4
Witchweed Multi-Leaf Up to 7" Multi-Leaf Up to 7"
Waterhemp, Common 2 2
Waterhemp, Tall 2 2
Yellow Rocket 4 6
* Reduced competition from weeds provides significant activity but not
always at a level considered acceptable for commercial weed control.
a Do not apply in cotyledon stage.
b For effective control of this weed it is necessary to use 1 % MSO and
2.5% UAN, urea-ammonium nitrate, v/v as an adjuvant in Areas 2 and
3 (soybeans only).
c Reduced competition from weeds.
10.0 COTTON
Warrant Ultra Herbicide may be used in preplant, at-planting,
preemergence, or post-directed applications. This herbicide
may be applied only ONCE per growing season. Warrant Ultra
Herbicide may be applied 48 - 70 fl oz./A depending on the soil
characteristics, see specific section for details.
When applying other acetochlor-containing herbicides (such as
Warrant Herbicide) later in the growing season, DO NOT exceed the
maximum annual rate of 3 pounds per acre per season of acetochlor
(refer to section 4.4.1 for acetochlor loading per Warrant Ultra
Herbicide rate). Read and follow the use instructions for applications
to cotton in the main label booklet for Warrant Herbicide.
10.1 Preplant, At-Planting, and Preemergence
 Applications
Approved Application System
Ground: Broadcast boom
Aerial: Fixed-wing and helicopter- Allowed in selected states only-
see Aerial Application Equipment (Section 8.2) of this label for
additional information.
Approved Application Methods:
Preplant Surface
Warrant Ultra Herbicide may be applied as a preplant surface
application to medium or fine-textured soils (i.e. soil types heavier
than coarse-textured soils) up to 21 days prior to planting cotton.
Apply after the last tillage operation is completed. This product will
control or reduce competition from the weeds in sections 9.1 (Annual
Grasses) and 9.2 (Annual Broadleaves). Apply Warrant Ultra Herbicide
from 48 fluid ounces per acre (fl oz./A) for soil with 1.5% or less
organic matter or from 48 - 60 fluid ounces per acre (fl oz./A) for soil
with over 1.5% organic matter. Also, to avoid severe crop injury, the
following directions must be followed when application is made to
medium or fine-textured soils:
• After Warrant Ultra Herbicide application, a minimum of 0.5 inch of
rainfall or overhead irrigation must occur before planting cotton.
• Cotton must be planted at least 0.75 inch in depth.
• Avoid overlapping spray swaths.
• Any soil disturbance may reduce weed control of this product.
7.125”
6.875”
6.495”
COPY AREA
COPY AREA
6.625”

7
The use of an in-furrow or seed treatment, fungicide or insecticide may
improve seedling health and establishment during early growth stages.
Preemergence Surface
Warrant Ultra Herbicide may only be applied to cotton as a
preemergence application grown in coarse textured soils (sandy
loam, loamy sand, sandy clay loam) at 48 – 60 fluid ounces per
acre (fl oz./A). Apply broadcast to the soil surface. Mechanical
incorporation is not recommended.
Cotton plants are tolerant to preplant surface or preemergence
applications of Warrant Ultra Herbicide when applied at labeled
rates and application use directions. Some crinkling or spotting of
cotton foliage or stunting may occur, but generally cotton plants
recover from these effects and develop normally.
Cotton foliage is not tolerant to Warrant Ultra Herbicide. Do not
apply this product to emerged cotton.
Application of this product with other soil applied herbicides may
increase the potential for crop injury.
Application of this product followed by conditions that do not favor
adequate crop growth or which cause stress (cold, wet soils), or
under waterlogged conditions from excessive irrigation or rainfall,
may result in crop injury.
10.2 W arrant Ultra Herbicide Tank Mixes for
Preplant Surf
ace or Preemergence

Application
This product may be tank-mixed with the following products. Read
and follow label directions of all products in the tank mixture. It is the
pesticide user’s responsibility to ensure that all products in the listed
mixtures are registered for application preplant or preemergence
to cotton. Users must follow the most restrictive directions and
precautionary language of the products in the mixture.
diuron,  fluometuron, Cotoran ®, Direx®
For control of emerged weeds, Warrant Ultra may be tank mixed with a
burndown herbicide such as dicamba containing herbicides, paraquat
containing herbicides, or Roundup agricultural products labeled
in cotton. Refer to the tank-mix partner label for use directions,
restrictions and limitations. Users must follow the most restrictive
directions and precautionary language of the products in the mixture.
10.3 Post-Directed Application (All Soil Types)
Apply Warrant Ultra Herbicide in emerged cotton as a post-directed
treatment using precision post-directed, hooded or shielded
application equipment to provide complete coverage of emerged
weeds. Apply Warrant Ultra Herbicide at 48 - 65 fluid ounces per
acre (fl oz./A) in a minimum of 15 gallons spray solution per acre.
Post-directed applications of Warrant Ultra Herbicide will provide
control of emerged weeds and residual preemergence control of
labeled weeds (once activated by rainfall or irrigation). Refer to the
Weeds Controlled section Table 9.3 for a list of weeds controlled,
labeled application rates, weed growth stages.
Application equipment should be calibrated (spray pressure, nozzle
type and configuration, and orifice size) to avoid fine spray droplets
contacting green cotton stems and foliage.
Post-Directed Application Timing in Cotton
Warrant Ultra Herbicide may be applied to cotton at least 6 inches in
height through layby as a post-directed application. All post-directed
applications should avoid spray contact with any green non-barked
parts of the cotton plant or foliage as unacceptable injury will occur.
Follow the application timing directions below for post-directed
applications in cotton.
Shield and Hooded Applications
Make a precision post-directed Warrant Ultra Herbicide
application to the base of the cotton plant avoiding contact
with the cotton stem or foliage when cotton is at least 6 inches
in height to avoid cotton injury. Use only hooded or shielded
spray equipment to apply Warrant Ultra Herbicide in cotton that
is 6 inches to 12 inches in height. Adjust nozzles to provide full
coverage of emerged target weeds.
Layby Applications
Make a post-directed Warrant Ultra Herbicide application to the
base of the cotton plant avoiding contact with any non-barked
portion of the cotton plant or foliage. Use precision post-directed
equipment or hooded or shielded sprayers on cotton that has
developed a minimum of 4 inches of brown bark through layby.
Application equipment should be configured to provide full
coverage of emerged target weeds.
10.4 Tank Mixes for Post-Directed Application
This product may be tank-mixed with the following products. Read
and follow label directions of all products in the tank mixture. It is
the pesticide user’s responsibility to ensure that all products in the
listed mixtures are registered for application post-directed to cotton.
Users must follow the most restrictive directions and precautionary
language of the products in the mixture.
diuron, glufosinate, glyphosate, pyrithiobac sodium,
trifloxysulfuron-sodium, Direx, Envoke
®, MSMA, Staple ®,
and Roundup® agricultural herbicides
When applied with hooded sprayers, Warrant Ultra Herbicide and
Warrant Ultra Herbicide tank mixes may be applied with products such
as paraquat containing herbicides, Roundup
® agricultural herbicides,
or glufosinate containing herbicides, labeled for hooded application
in cotton. Refer to the tank-mix partner label for use directions,
restrictions and limitations. Users must follow the most restrictive
directions and precautionary language of the products in the mixture.
Cotton foliage is not tolerant to Warrant Ultra Herbicide. Do not apply
tank mixes of this product to emerged cotton.
Application of this product with other soil applied herbicides may
increase the potential for crop injury.
Application of this product followed by conditions that do not favor
adequate crop growth or which cause stress (cold, wet soils), or
under waterlogged conditions from excessive irrigation or rainfall,
may result in crop injury.
10.5 Product Use Restrictions - Cotton
n Pre-Harvest Interval (PHI): Do not apply Warrant Ultra Herbicide later
than 70 days before harvest.
n Do not graze treated area or feed treated cotton forage to livestock
following application of this product
n Do not plant cotton within 21 days of application when Warrant Ultra
Herbicide has been applied in fine to medium textured soils.
n Do not use Warrant Ultra Herbicide post-directed if it was used in
preplant or preemergence applications.
n When applying other acetochlor-containing herbicides later in
the growing season, DO NOT exceed the maximum annual rate
of 3 pounds per acre per season of acetochlor.
° Maximum area rates for Warrant Ultra. See Area Use Map for
detailed information.
n Area 1: A maximum of 70 fl oz. of Warrant Ultra Herbicide (or
a maximum of 0.34 Ib. a.i./A of fomesafen from any product
containing fomesafen) may be applied per acre per year (see
Area Use Map).
n A rea 2:  A maximum of 70 fl oz. of Warrant Ultra Herbicide
(or a maximum of 0.34 Ib. a.i./A of fomesafen from any
product containing fomesafen) may be applied per acre in
ALTERNATE years (see Area Use Map).
n A rea 3:  A maximum of 60 fl oz. of Warrant Ultra Herbicide
(or a maximum of 0.30 Ib. a.i./A of fomesafen from any
product containing fomesafen) may be applied per acre in
ALTERNATE years (see Area Use Map).
n A rea 4:  A maximum of 48 fl oz. of Warrant Ultra Herbicide
(or a maximum of 0.24 Ib. a.i./A of fomesafen from any
product containing fomesafen) may be applied per acre in
ALTERNATE years (see Area Use Map).
11.0 Soybeans
Warrant Ultra Herbicide may be used in preplant, at-planting,
preemergence, or postemergence applications. This herbicide
may be applied only ONCE per growing season. Warrant Ultra
Herbicide may be applied 48 - 70 fl oz./A depending on the
maximum area rates and soil characteristics, see specific section
for details. Some bronzing, crinkling or spotting of soybean leaves
may occur following postemergent applications, but generally
soybeans recover from these effects and develop normally.
When applying other acetochlor-containing herbicides (such as
Warrant Herbicide) later in the growing season, DO NOT exceed the
maximum annual rate of 3 pounds per acre per season of acetochlor
(refer to section 4.4.1 for acetochlor loading per Warrant Ultra
Herbicide rate). Read and follow the use instructions for applications
to soybeans in the main label booklet for Warrant Herbicide.
11.1 Preplant, At-Planting, and Preemergence
       Applications
Approved Application System
Ground: Broadcast boom
Aerial: Fixed-wing and helicopter- Allowed in selected states only-
see Aerial Application Equipment (Section 8.2) of this label for
additional information.
When applied preplant, at-planting, or preemergence this product
will provide preemergence control or reduced competition of the
weeds listed in the “WEEDS CONTROLLED” section of the label
booklet for Warrant Ultra.
Approved Application Method
Preplant, At-planting or Preemergence Surface
Warrant Ultra may be applied preplant, at-planting or
preemergence to soybeans at 48 to 70 fl oz./A according to the
rate table below. Apply broadcast to the soil surface according
to the rate table listed below. Mechanical incorporation is not
recommended.
Application of this product with other postemergence or soil
applied herbicides may increase the potential for crop injury.
Application of this product followed by conditions that do not favor
adequate crop growth or which cause stress (cold, wet soils), or
under waterlogged conditions from excessive irrigation or rainfall,
may result in crop injury.
Table 11.2 Warrant Ultra Herbicide Application Rates for
soybeans grown in various soil types
SOIL
TEXTURAL
GROUP
BROADCAST RATE PER ACRE*
Less than 1.5%
Organic Matter (fl oz.)
1.5% or More Organic
Matter (fl oz.)
Coarse 48 48 to 60
Medium 48 to 55 48 to 65
Fine 48 to 60 48 to 70
*
 Use the higher rate in the range for areas of heavy weed
infestation. Consult Area Use Maps, Section 4.5, for Maximum
Application Rates for Fomesafen
7.125”
6.875”
6.495”
COPY AREA
COPY AREA
6.625”

8
11.2 Warrant Ultra Tank Mixes for Preplant,
 At-planting, or Preemergence Surface
 Application
This product may be tank-mixed with the following products. Read
and follow label directions of all products in the tank mixture. It is the
pesticide user’s responsibility to ensure that all products in the listed
mixtures are registered for application preplant or preemergence
to soybeans. Users must follow the most restrictive directions and
precautionary language of the products in the mixture.
imazethapyr, metribuzin, pendimethalin
For control of emerged weeds, Warrant Ultra Herbicide may be
tank mixed with a burndown herbicide such as 2,4-D, dicamba
containing herbicides, paraquat containing herbicides, or Roundup
agricultural products labeled in soybeans. Refer to the tank-mix
partner label for use directions, restrictions and limitations. Users
must follow the most restrictive directions and precautionary
language of the products in the mixture.
11.3 Warrant Ultra Herbicide Postemergence
 Application
For optimum weed control, adjust droplet size to ensure thorough
spay coverage of weeds.
Apply this product postemergence to soybeans at 48 to 70 fl oz./A
according to the rate charts below. A single application of this product
will provide control or reduced competition of the weeds listed section
9.3 in the “WEEDS CONTROLLED” section of this label. Observe the
directions for use, precautions and restrictions on the label.
Approved Application System
Ground: Broadcast boom
Aerial: Fixed-wing and helicopter- Allowed in selected states only-
see Aerial Application Equipment (Section 8.2) of this label for
additional information.
Approved Application Method
Postemergence Surface
The application should be made before soybeans reach growth
stage R2. The optimum timing of application is when soybeans
are V2-V3. Use rates are defined in the table below. Use the higher
rate where heavy weed infestations exist, if soil conditions allow.
If weeds are emerged at application, a labeled postemergence
herbicide may be applied with this product to control the emerged
weeds not listed this Weed controlled section.
Apply Warrant Ultra Herbicide broadcast over-the-top, according to
the rate table listed below.
DO NOT graze treated area or feed treated forage to livestock
following application of this product.
Table 11.3 Warrant Ultra Herbicide Application Rates for
soybeans grown in various soil types
SOIL
TEXTURAL
GROUP
BROADCAST RATE PER ACRE*
Less than 1.5%
Organic Matter (fl oz.)
1.5% or More Organic
Matter (fl oz.)
Coarse 48 48 to 60
Medium 48 to 55 48 to 65
Fine 48 to 60 48 to 70
* Use the higher rate in the range for areas of heavy weed
infestation. Consult Area Use Maps, Section 4.5, for Maximum
Application Rates for Fomesafen
11.4 Warrant Ultra Herbicide Tank-Mixtures
 for Soybeans Postemergence Application
This product may be tank-mixed with the following products. Read
and follow label directions of all products in the tank mixture. It is the
pesticide user’s responsibility to ensure that all products in the listed
mixtures are registered for application postemergence (in-crop) to
soybeans. Users must follow the most restrictive directions and
precautionary language of the products in the mixture.
 Classic ®, FirstRate®, Pursuit®
11.5 Warrant Ultra Herbicide plus Roundup
 Agricultural Herbicides on Roundup Ready
 Soybeans and Roundup Ready 2 Yield
 Soybeans
This product may be used postemergence in tank mixture with Roundup
agricultural herbicides on Roundup Ready Soybeans and Roundup
Ready 2 Yield Soybeans when soybeans are completely emerged until
the soybeans reach growth stage R2. Refer to Roundup agricultural
herbicide labels for specific weeds controlled postemergence.
Approved Application System
Ground: Broadcast boom
Aerial: Fixed-wing and helicopter- Allowed in selected states only-
see Aerial Application Equipment (Section 8.2) of this label for
additional information.
Approved Application Method
Postemergence Surface
The application should be made before soybeans reach growth
stage R2. The optimum timing of application is when soybeans
are V2-V3. Use rates are defined in the table below. Use the higher
rate where heavy weed infestations exist, if soil conditions allow.
If weeds are emerged at application, a labeled postemergence
herbicide may be applied with this product to control the emerged
weeds not listed this Weed controlled section. This tank mix should
be applied when weeds are 2 to 4 inches in height and before the
weed height and/or density become competitive with the crop.
For difficult to control weeds such as fall panicum, barnyardgrass,
crabgrass, shattercane, broadleaf signalgrass and Pennsylvania
smartweed use the higher rates of Roundup agricultural herbicides
when tank-mixed with Warrant Ultra.
AVOID DRIFT. EXTREME CARE MUST BE USED WHEN APPLYING THIS
PRODUCT TO PREVENT INJURY TO DESIRABLE PLANTS AND CROPS
WHICH DO NOT CONTAIN A GLYPHOSATE TOLERANCE GENE.
11.6 Product Use Restrictions - Soybeans
n This herbicide may be applied only ONCE per growing season.
n Pre-harvest Interval (PHI): Do not apply within 45 days of harvest.
n Do not graze treated area or feed treated forage to livestock
following postemergence application of this product.
n DO NOT make postemergence surface applications using
sprayable fluid fertilizer as the carrier because severe crop
injury may occur.
n When applying other acetochlor-containing herbicides later
in the growing season, DO NOT exceed the maximum annual
rate of 3 pounds per acre per season of acetochlor.
° Maximum area rates for Warrant Ultra. See Area Use
Map for detailed information.
n Area 1: A maximum of 70 fl oz. of Warrant Ultra
Herbicide (or a maximum of 0.34 Ib. a.i./A
of fomesafen from any product containing
fomesafen) may be applied per acre per year (see
Area Use Map).
n Area 2: A maximum of 70 fl oz. of Warrant Ultra
Herbicide (or a maximum of 0.34 Ib. a.i./A
of fomesafen from any product containing
fomesafen) may be applied per acre in ALTERNATE
years (see Area Use Map).
n Area 3: A maximum of 60 fl oz. of Warrant Ultra
Herbicide (or a maximum of 0.30 Ib. a.i./A
of fomesafen from any product containing
fomesafen) may be applied per acre in ALTERNATE
years (see Area Use Map).
n Area 4: A maximum of 48 fl oz. of Warrant Ultra
Herbicide (or a maximum of 0.24 Ib. a.i./A
of fomesafen from any product containing
fomesafen) may be applied per acre in ALTERNATE
years (see Area Use Map).
12.0 LIMIT OF WARRANTY AND LIABILITY
This Company warrants that this product conforms to the chemical
description on the label and is reasonably fit for the purposes set forth in
the Complete Directions for Use label booklet (“Directions”) when used
in accordance with those Directions under the conditions described
therein. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, NO
OTHER EXPRESS WARRANTY OR IMPLIED WARRANTY OF FITNESS FOR
PARTICULAR PURPOSE OR MERCHANTABILITY IS MADE. This warranty is
also subject to the conditions and limitations stated herein.
To the extent consistent with applicable law, buyer and all users shall
promptly notify this Company of any claims whether based in contract,
negligence, strict liability, other tort or otherwise.
Buyer and all users are responsible for all loss or damage from use
or handling which results from conditions beyond the control of this
Company to the extent consistent with applicable law, including, but not
limited to, incompatibility with products other than those set forth in the
Directions, unusual weather, weather conditions which are outside the
range considered normal at the application site and for the time period
when the product is applied, as well as weather conditions which are
outside the application ranges set forth in the Directions, application in
any manner not explicitly set forth in the Directions, moisture conditions
outside the moisture range specified in the Directions, or the presence
of products other than those set forth in the Directions in or on the soil,
crop or treated vegetation.
This Company does not warrant any product reformulated or
repackaged from this product except in accordance with this Company’s
stewardship requirements and with express written permission from
this Company.
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE
REMEDY OF THE USER OR BUYER, AND THE LIMIT OF THE LIABILITY
OF THIS COMPANY OR ANY OTHER SELLER FOR ANY AND ALL LOSSES,
INJURIES OR DAMAGES RESULTING FROM THE USE OR HANDLING OF
THIS PRODUCT (INCLUDING CLAIMS BASED IN CONTRACT, NEGLIGENCE,
STRICT LIABILITY, OTHER TORT OR OTHERWISE) SHALL BE THE
PURCHASE PRICE PAID BY THE USER OR BUYER FOR THE QUANTITY
OF THIS PRODUCT INVOLVED, OR, AT THE ELECTION OF THIS COMPANY
OR ANY OTHER SELLER, THE REPLACEMENT OF SUCH QUANTITY, OR, IF
NOT ACQUIRED BY PURCHASE, REPLACEMENT OF SUCH QUANTITY. TO
THE EXTENT CONSISTENT WITH APPLICABLE LAW, IN NO EVENT SHALL
THIS COMPANY OR ANY OTHER SELLER BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES.
Buyer and all users are deemed to have accepted the terms of this LIMIT
OF WARRANTY AND LIABILITY which may not be varied by any verbal or
written agreement.
Bayer, Bayer Cross, Roundup Ready 2 Yield, Roundup Ready PLUS,
Roundup Ready, Roundup and Warrant Ultra Herbicide are registered
trademarks of Bayer Group. ©2025 Bayer Group. All rights reserved.
All other trademarks are the property of their respective owners.
EPA Reg. No. 524-620
In case of an emergency involving this product,
Call Collect, day or night, 1-800-334-7577.
Packed for:
Bayer CropScience LP
800 N. Lindbergh Blvd.
St. Louis, Missouri, 63167 USA
7.125”
6.875”
6.495”
COPY AREA
COPY AREA
6.625”

9
7.125”
6.875”
6.495”
COPY AREA
COPY AREA
6.625”

10
7.125”
6.875”
6.495”
COPY AREA
COPY AREA
6.625”

11
7.125”
6.875”
6.495”
COPY AREA
COPY AREA
6.625”

US62219767D (250128D) Warrant Ultra MINI BULK Base
Color: Black
 Date:
 08/20/2025
(Label Coordinator: Mark Schmidt)
US62219767D    250128D    08/25EPA Est.
NET CONTENTS
     GAL
Net Contents:
Herbicide
Read the entire label before using this product.
Use only according to label instructions.
Read “LIMIT OF WARRANTY AND LIABILITY” statement, which appears in the label
booklet or pamphlet, before buying or using. If terms are not acceptable, return
at once unopened.
PRECAUTIONARY STATEMENTS
Hazards to Humans and Domestic Animals
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en
detalle. (If you do not understand the label, find someone to explain it to you in detail.)
KEEP OUT OF REACH OF CHILDREN
DANGER/PELIGRO
CAUSES IRREVERSIBLE EYE DAMAGE. Do not get in eyes, on skin, or on clothing.
Wear protective eyewear. Prolonged or frequently repeated skin contact may
cause allergic reactions in some individuals. Remove contaminated clothing and
wash before reuse. Wash thoroughly with soap and water after handling and
before eating, drinking, chewing gum, using tobacco or using the toilet.
FIRST AID: Call a poison control center or doctor for treatment advice
IF IN EYES • Hold ey e open and rinse slowly and gently with water for
15-20 minutes.
• Remo ve contact lenses, if present, after the first 5 minutes, then
continue rinsing.
•
 Call a poison control center or doctor for tr
eatment advice.
IF ON
SKIN OR
CLOTHING
•
 T
ake off contaminated clothing.
•
 Rinse skin immediately with plenty of w
ater for 15-20 minutes.
•
 Call a poison control center or doctor for tr
eatment advice.
IF
SWALLOWED
• Call a poison control center or doctor immediately for tr eatment advice.
• Ha ve person sip a glass of water if able to swallow.
• Do
 not induce vomiting unless told to by a poison control center
or doctor.
•
 Do not give anything b
y mouth to an unconscious person.
NOTE TO PHYSICIAN
Probable mucosal damage may contraindicate the use of gastric lavage
•
 Ha
ve the product container or label with you when calling a poison control center or
doctor, or going for treatment.
•
 Y
ou may also contact 1-800-334-7577, collect day or night, for emergency medical
treatment information
•
 This product
is identified as Warrant Ultra Herbicide, EPA Registration No. 524-620.
Personal Protective Equipment (PPE):
Applicators and other handlers must wear: protective eyewear (goggles, face
shield, or safety glasses), longsleeved shirt and long pants, and shoes plus socks.
Discard clothing and other absorbent materials that have been drenched or heavily
contaminated with this product’s concentrate. Do not reuse them. Follow manufacturer’s
instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use
detergent and hot water. Keep and wash PPE separately from other laundry.
Engineering Controls: When handlers use closed systems, or enclosed cabs in
a manner that meets the requirements listed in the Worker Protection Standard
(WPS) for agricultural pesticides 40 CFR 170.240(d)(4-6), the handler PPE
requirements may be reduced or modified as specified in the WPS.
User Safety Recommendations:
Users should:
•
 W
ash hands before eating, drinking, chewing gum, using tobacco or using
the toilet.
•
 Remo
ve clothing/PPE immediately if pesticide gets inside. Then wash
thoroughly and put on clean clothing.
•
 R
emove PPE immediately after handling this product. As soon as possible,
wash thoroughly and change into clean clothing.
Environmental Hazards
NON-TARGET ORGANISM ADVISORY: This product is toxic to plants and may adversely
impact the forage and habitat of non-target organisms, including pollinators, in areas
adjacent to the treated site. Protect the forage and habitat of non-target organisms
by following label directions intended to minimize spray drift.
Drift and runoff may be hazardous to aquatic organisms in water adjacent to treated
areas.
SURFACE WATER ADVISORY: This product may impact surface water quality due to
runoff of rainwater. This is especially true for poorly draining soils and soils with
shallow ground water. This product is classified as having high potential for reaching
surface water via runoff for several months after application.
A level, well-maintained vegetative buffer strip between areas to which this product
is applied and surface water features such as ponds, streams, and springs will
reduce the potential loading of this product from runoff water and sediment. Runoff
of this product will be reduced by avoiding applications when rainfall or irrigation is
expected to occur within 48 hours.
This product is toxic to fish.
For Terrestrial Uses: Do not apply directly to water, or to areas where surface
water is present or to intertidal areas below the mean high water mark. Do not
contaminate water when disposing of equipment wash water or rinsate. Do not
apply when weather conditions favor drift from target area.
GROUNDWATER ADVISORY: This product is known to leach through soil into
groundwater under certain conditions as a result of label use. This chemical may
leach into groundwater if used in areas where soils are permeable, particularly
where the water table is shallow.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in any manner inconsistent with its
labeling. This product can only be used in accordance with the Directions for Use on
this label or in separately published Bayer CropScience LP Supplemental labeling.
Do not apply this product in a way that will contact workers or other persons,
either directly or through drift. Only protected handlers may be in the area during
application. For any requirements specific to your State or Tribe, consult the
agency responsible for pesticide regulation.
Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk Counties
of New York State.
Agricultural Use Requirements
Use this product only in accordance with its labeling and with the Worker
Protection Standard, 40 CFR part 170. Refer to supplemental labeling under
“AGRICULTURAL USE REQUIREMENTS” in the DIRECTIONS FOR USE section for
information about this statement.
STORAGE AND DISPOSAL
Proper pesticide storage and disposal are essential to protect against exposure
to people and the environment due to leaks and spills, excess product or waste,
and vandalism. Do not allow this product to contaminate water, foodstuffs, feed
or seed by storage or disposal.
PESTICIDE STORAGE: Store pesticides away from food, pet food, feed, seed,
fertilizers, and veterinary supplies. Keep container closed to prevent spills and
contamination. If product freezes, return to room temperature and agitate to
reconstitute. In case of spill or leak on floor or paved surfaces, soak up with
sand, earth or synthetic absorbent. Remove to chemical waste area.
PESTICIDE DISPOSAL. To avoid wastes, use all material in this container,
including rinsate, by application in accordance with label directions. If wastes
cannot be avoided, offer remaining product to a waste disposal facility or
pesticide disposal program. Such programs are often run by state or local
governments or by industry. All disposal must be in accordance with applicable
federal, state and local regulations and procedures.
CONTAINER HANDLING AND DISPOSAL:
Refillable container. Refill this container with pesticide only. Do not reuse this
container for any other purpose.
Cleaning this container before refilling is the responsibility of the refiller.
Cleaning this container before final disposal is the responsibility of the person
disposing of the container.
To clean this container before final disposal, empty the remaining contents
from this container into application equipment or a tank mix. Fill the container
about 10 percent full with water. Agitate vigorously or recirculate water with the
pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate
collection system. Repeat this rinsing procedure two more times. Then offer this
container for recycling, if available. To obtain information about recycling refillable
containers, contact Bayer CropScience LP at 1-866-99BAYER (1-866-992-2937).
Bayer, Bayer Cross and Warrant Ultra Herbicide are registered trademarks of
Bayer Group. ©2025 Bayer Group. All rights reserved.
GROUP
GROUP
ACETOCHLOR
FOMESAFEN
HERBICIDE
HERBICIDE
15
14
Packed for:
Bayer CropScience LP
800 N. Lindbergh Blvd.
St. Louis, Missouri, 63167 USA
Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk
Counties of New York State.
Warrant® Ultra is a herbicide for weed control in Soybeans and Cotton.
ACTIVE INGREDIENTS:
*Acetochlor
 .........................................................................................................
 30.2%
**Fomesafen, sodium salt

....................................................................................     7.1%
OTHER INGREDIENTS

...............................................................................................   62.7%
100.0%
*Contains 2.82 pounds/gallon or 338 g
rams/liter of
2-chloro-N-ethoxymethyl-N-(2-ethyl-6-methylphenyl) acetamide.
**Contains equivalent to 6.72% or 0.63 pounds/gallon or 75 grams/liter of fomesafen
active ingredient (5-[2-chloro-4-(trifluoromethyl)phenoxy]-N-(methylsulfonyl)-2-
nitrobenzamide)#
 *CAS#: 34256-82-1  **CAS#: 108731-70-0   #CAS#: 72178-02-0
This product is protected by U.S. Patent No. 5,925,595. Other patent(s) pending. No
license is granted under any non-U.S. patent(s).
EPA Reg. No. 524-620
KEEP OUT OF REACH OF CHILDREN
DANGER/PELIGRO
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en
detalle. (If you do not understand the label, find someone to explain it to you in detail.)
See label booklet for complete Directions for Use.
RECIRCULATE OR MIX TO ENSURE UNIFORM DISPERSION BEFORE TRANSFER FROM TANK
FOR PRODUCT INFORMATION OR ASSISTANCE IN USING THIS PRODUCT,
CALL TOLL-FREE, 1-866-99BAYER (1-866-992-2937)
IN CASE OF AN EMERGENCY INVOLVING THIS HERBICIDE PRODUCT, OR FOR MEDICAL
ASSISTANCE, CALL COLLECT, DAY OR NIGHT, 1-800-334-7577
Escanee el código QR para español
Scan QR Code for Spanish