crop-chem-docs/corpus/epa_ppls/34704-1130.md

# Carabiner

- EPA Reg No: **34704-1130**
- Registrant: LOVELAND PRODUCTS, INC.
- Signal word: Caution
- Active ingredients: Mesotrione (40%)
- Label accepted: 2026-08-21
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/034704-01130-20260821.pdf

---
August 21, 2026
SENT BY EMAIL
Leah Strayer
leah@pyxisrc.com
LOVELAND PRODUCTS, INC.
Subject: Labeling Notification per Pesticide Registration Notice (PRN) 98-10 - Minor label revisions
like a revised optional referral statement, updated container handling language, incorporation
of logos and graphical elements, typographical corrections and formatting, and minor
modifications to the company address
Product Name: Carabiner
Admin Number: 34704-1130
EPA Receipt Date: 05/26/2026
Action Case Number: 00699744
Dear Leah Strayer:
The U.S. Environmental Protection Agency is in receipt of your application for notification under Pesticide
Registration Notice 98-10 for the above referenced product. The EPA has conducted a review of this request
for its applicability under PRN 98-10 and finds that the action requested falls within the scope of PRN 98-10.
The labeling submitted with this application has been stamped "Notification" and will be placed in our records.
Should you wish to add/retain a reference to your company’s website on your label, then please be aware that
the website becomes labeling under the Federal Insecticide, Fungicide, and Rodenticide Act and is subject to
review by the EPA. If the website is false or misleading, the product will be considered to be misbranded and
sale or distribution of the product is unlawful under FIFRA section 12(a)(1)(E). 40 CFR § 156.10(a)(5) lists
examples of statements the EPA may consider false or misleading. In addition, regardless of whether a
website is referenced on your product’s label, claims made on the website may not substantially differ from
those claims approved through the registration process. Therefore, should the EPA find or if it is brought to
our attention that a website contains statements or claims substantially differing from statements or claims
made in connection with obtaining a FIFRA section 3 registration, the website will be referred to the EPA’s
Office of Enforcement and Compliance Assurance.

If you have questions, please contact Olivia Swanson by telephone at (202) 564-2255 or via email at
swanson.olivia@epa.gov.
Sincerely,
Lydia Crawford, PM 24
FHB, RD
Office of Pesticide Programs

[Carabiner EPA Reg No 34704-1130 Page 1] 
[Editor’s Note for Reviewers: [Brackets] indicate optional passages or passages that depend on packaging. {Braces} indicate location 
of text.] 
{BEGIN Booklet Front Panel} 
 
MESOTRIONE GROUP 27 HERBICIDE 
Carabiner 
 
ACTIVE INGREDIENT: 
By Wt. 
Mesotrione: 2-[4-(methylsulfonyl)-2-nitrobenzoyl]-1,3-cyclohexanedione. .................................................................................... 40.0% 
OTHER INGREDIENTS: .............................................................................................................................................................. ....... 60.0% 
TOTAL 100.0% 
Contains 4.0 pounds mesotrione per gallon. 
KEEP OUT OF REACH OF CHILDREN 
CAUTION 
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. 
(If you do not understand the label find someone to explain it to you in detail.) 
See [Below] Inside [This] Label Booklet for [additional] [First Aid][/] [Spanish First Aid][;] [and] [additional] Precautionary Statements[;] 
[and] Directions for Use [(including] [Mitigations for Endangered Species)][,][and] [Storage and Disposal] [Instructions)] [;] [and] [Other] 
[Required Spanish] [Labeling] [and] [Other] [Use Information] [.] 
[For Additional Precautionary Statements, Directions for Use, Storage and Disposal and Other Use Information, See Inside the 
Label Booklet.] 
 
FIRST AID 
If on skin: • Take off contaminated clothing. 
• Rinse skin immediately with plenty of water for 15 to 20 minutes. 
• Call a poison control center or doctor for treatment advice. 
HOT LINE NUMBER 
Have the product container or label with you when calling a poison control center or doctor, or when going for treatment. For 
emergency medical assistance, call 1-866-944-8565. For chemical emergency: spill, leak, fire, exposure or accident, call 
CHEMTREC: 1-800-424-9300. 
 
EPA Reg. No.: 34704-1130 
EPA Est. No.: [nnnn-xx-nnn] 
Net Contents: [yyyy] 
[Print code] 
[EPA MASTER LABEL—Label ID 06/19NOTIF V1 0526] 
 
Formulated forMANUFACTURED FOR 
Loveland Products Inc., 
P.O. Box 1286, Greeley, CO[Colorado] 80632-1286 [USA] 
{END Booklet Front Panel} 
 
 
 
 
 
 
34704-1130
8/21/2026

[Carabiner EPA Reg No 34704-1130 Page 2] 
{BEGIN Language inside booklet} 
PRECAUTIONARY STATEMENTS 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
CAUTION 
Harmful if absorbed through skin. Prolonged or frequently repeated skin contact may cause allergic reactions in some individuals. 
Avoid contact with skin, eyes, or clothing. 
Personal Protective Equipment (PPE): 
Applicators and other handlers must wear: 
• Long-sleeved shirt and long pants 
• Shoes plus socks 
• Chemical-resistant gloves (barrier laminate, butyl rubber ≥ 14 mils, neoprene rubber, nitrile rubber ≥ 14 mils, 
polyvinyl chloride (PVC) ≥ 14 mils, and viton ≥ 14 mils) 
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot 
water. Keep and wash PPE separately from other laundry. 
 
USER SAFETY RECOMMENDATIONS 
Users should: 
• Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco, or using 
the toilet. 
• Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. 
• Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as 
possible, wash thoroughly and change into clean clothing. 
ENGINEERING CONTROL STATEMENTS 
When handlers use closed systems or enclosed cabs in a manner that meets the requirements listed in the Worker Protection 
Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4 -6)], the handler PPE requirements may be reduced or modified as 
specified in the WPS. 
 
ENVIRONMENTAL HAZARDS 
Do not apply directly to water or to areas where surface water is present, or to intertidal areas below the mean high-water mark. Do 
not contaminate water when disposing of equipment wash water or rinsate. 
SURFACE WATER ADVISORY 
This product may contaminate water through drift or spray in wind. This product has a high potential for runoff for several w eeks 
after application. Poorly draining soils and soils with shallow water tables are more prone to produce runoff that contains t his 
product. A level, well maintained vegetative buffer strip between areas to which this product is applied and surface water fe atures 
such as ponds, streams, and springs will reduce the potential for contamination of water from runoff. Runoff of this product will be 
reduced by avoiding applications when rainfall is forecasted to occur within 48 hours. Sound erosion control practices will r educe 
this product’s contribution to surface water contamination. 
 
PHYSICAL/CHEMICAL HAZARDS 
Combustible liquid. Do not use or store near heat or open flame. Do not mix or allow contact with oxidizing agents. Hazardous 
chemical reaction may occur. 
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected 
handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the State or Tribal 
agency responsible for pesticide regulation.

[Carabiner EPA Reg No 34704-1130 Page 3] 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This Standard 
contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of 
agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also 
contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) 
and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker 
Protection Standard. 
Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours. 
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact 
with anything that has been treated, such as plants, soil, or water is: 
• coveralls 
• shoes plus socks 
• chemical-resistant gloves (barrier laminate, butyl rubber ≥ 14 mils, nitrile rubber ≥ 14 mils, neoprene rubber, polyvinyl 
chloride (PVC) ≥ 14 mils, and viton ≥ 14 mils) 
 
NON-AGRICULTURAL USE REQUIREMENTS 
The requirements in this box apply to uses of this product that are NOT within the scope of the Worker Protection Standard, 40 
CFR Part 170. The WPS applies when this product is used to produce agricultural plants on farms, forests, nurseries, and 
greenhouses. 
Do not enter treated areas without protection clothing until sprays have dried. 
PRODUCT INFORMATION 
This product is a systemic pre-emergence and post-emergence herbicide for selective contact and residual control of broadleaf 
weeds in labeled crops. In pre-emergence applications, weeds take up the product through the soil during weed emergence. Dry 
weather conditions reduce pre-emergent effectiveness of this product. At least ¼-inch of rainfall must occur within 7 to 10 days of 
application; rotary hoeing activates this product. In post- emergence applications, vulnerable weeds take up the product through 
treated foliage and stop growing soon after application. It can take up to two weeks for weeds to die. This product is absorbed by 
soil and/or through foliage of emerged weeds. 
This product does not control most species of grass weeds. This product can be tank-mixed with other herbicides registered to 
control grass weeds (see tank-mix information in this label for additional information). This product can be used in combination with 
a burndown herbicide prior to planting to provide weed control in field corn, seed corn, yellow popcorn, and sweet corn. It is the 
pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable 
restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive 
directions for use a precautionary statement for each product in the tank mixture. 
 
RESISTANCE-MANAGEMENT RECOMMENDATIONS 
For resistance management, this product is a Group 27 herbicide. Any weed population may contain or develop plants naturally 
resistant to this product and other Group 27 herbicides. The resistant biotypes may dominate the weed population if these herbicides 
are used repeatedly in the same field. Appropriate resistance management strategies should be followed. 
The efficacy of this product is not affected by the presence of biotype weed species that are resistant to Protoporphyrinogen Oxidase 
(PPO), 4-Hydroxyphenylpyruvate Dioxygenase (HPPD) or Acetolactate Synthase (ALS) inhibiting herbicides or to Triazine or Glyphosate 
herbicides. 
 
To reduce the risk of weeds developing resistance to mesotrione in corn, always use full specified label rates. When applying this 
product post-emergence after a mesotrione -containing pre-emergence herbicide, add atrazine as a tank mix partner. Use specified 
label rates of this product to prevent selection for, or population shifts toward, marginally resistant weed species and/or s pecies 
biotypes. 
 
Fields should be scouted before and after applying to identify the weed species present and their growth stage to determine i f the 
intended application will be effective. 
To delay herbicide resistance, take the following steps: 
• Rotate the use of this product or other Group 27 herbicides within a growing season sequence or among growing seasons

[Carabiner EPA Reg No 34704-1130 Page 4] 
with different herbicide groups that control the same weeds in a field. 
• Use tank mixtures with herbicides from a different group if such use is permitted; where information on resistance in target 
weed species is available, use the less resistance -prone partner at a rate that will control the target weed(s) equally as well 
as the more resistance -prone partner. Consult your local extension service or certified crop advisor if you are unsure as to 
which active ingredient is currently less prone to resistance. 
• Adopt an integrated weed -management program for herbicide use that includes scouting and uses historical information 
related to herbicide use and crop rotation, and that considers tillage (or other mechanical control methods), cultural (e.g., 
higher crop seeding rates; precision fertilizer application method and timing to favor the crop and not the weeds), biological 
(weed-competitive crops or varieties) and other management practices. 
• Scout after herbicide application to monitor weed populations for early signs of resistance development. Indicators of 
possible herbicide resistance include: 
o failure to control a weed species normally controlled by the herbicide at the dose applied, especially if control is 
achieved on adjacent weeds; 
o a spreading patch of non-controlled plants of a particular weed species; 
o surviving plants mixed with controlled individuals of the same species. 
• If resistance is suspected, prevent weed seed production and weed escapes in the affected area by an alternative herbicide 
from a different group or by a mechanical method such as hoeing or tillage. Prevent movement of resistant weed seeds to 
other fields by cleaning harvesting and tillage equipment when moving between fields, and planting clean seed. 
• If a weed pest population continues to progress after treatment with this product, discontinue use of this product, and switch 
to another management strategy or herbicide with a different mode of action, if available. 
• Contact your local extension specialist or certified crop advisors for additional pesticide resistance-management and/or 
integrated weed-management recommendations for specific crops and weed biotypes. 
• For further information or to report suspected resistance contact Loveland Products, Inc. at 888-574-2878 or at 
www.lovelandproducts.com. 
INTEGRATED WEED PEST MANAGEMENT 
Integrate this product into an overall weed pest management strategy whenever the use of an herbicide is required. Practices 
known to reduce weed development (tillage, crop competition) and herbicide use (weed scouting, proper application timing, 
banding) should be followed wherever possible. Consult local agricultural and weed authorities for additional IPM strategies 
established for your area. 
USE PRECAUTIONS 
Severe corn injury and/or yield loss can occur: 
• From post-emergent application of this product to corn treated with Terbufos or Chlorpyrifos. 
• If foliar post -emergent applications of this product are made to corn in a tank mix with any organophosate or carbamate 
insecticide. 
• If an organophosphate or carbamate insecticide is applied foliar post-emergence within 7 days before or 7 days after applying 
this product. 
• When weeds are stressed due to drought, heat, lack of fertility, flooding, or prolonged cool temperatures control can be 
reduced or delayed since the weeds are not actively growing. Weed escapes or regrowth may occur when application is made 
under prolonged stress conditions. Optimum weed control will be obtained if an application of this product is made following 
label directions when weeds are actively growing. 
• This product may be applied with pyrethroid type insecticides (e.g., Lambda cyhalothrin). 
USE RESTRICTIONS 
• DO NOT apply this product to white popcorn or ornamental (Indian) corn. 
• DO NOT cultivate corn within 7 days before or after application of this product as weed control may be reduced. 
• DO NOT apply this product through any type of irrigation system unless specified under the specific crop section of the label. 
• DO NOT apply this product with suspension fertilizers as the carrier. 
• DO NOT apply this product post-emergence in a tank mix with emulsifiable concentrate grass herbicides, unless specifically 
directed under one of the tank mix sections of this label, or crop injury can occur. 
• DO NOT make aerial applications of this product unless specified in the specific crop directions of this label. 
 
 
 
 
MANDATORY SPRAY DRIFT MANAGEMENT

[Carabiner EPA Reg No 34704-1130 Page 5] 
Aerial Applications 
• Do not release spray at a height greater than 10 ft above the vegetative canopy, unless a greater application height is 
necessary for pilot safety. 
• For all applications, applicators are required to use a coarse or coarser droplet size (ASABE S572.1). 
• The boom length must not exceed 65% of the wingspan for airplanes or 75% of the rotor blade diameter for helicopters. 
• Applicators must use ½ swath displacement upwind at the downwind edge of the field. 
• Nozzles must be oriented so the spray is directed toward the back of the aircraft. 
• Do not apply when wind speeds exceed 10 miles per hour at the application site. 
• Do not apply during temperature inversions. 
 
Boom-less Ground Applications 
• Applicators are required to use a coarse or coarser droplet size (ASABE S572.1) for all applications. 
• Do not apply when wind speeds exceed 10 miles per hour at the application site. 
• Do not apply during temperature inversions. 
 
Ground Boom Applications 
• Apply with the nozzle height recommended by the manufacturer, but no more than 3 feet above the ground or crop canopy. 
• For all applications, applicators are required to use a coarse or larger droplet size (ASABE S572.1). 
• Do not apply when wind speeds exceed 10 miles per hour at the application site. 
• Do not apply during temperature inversions. 
 
SPRAY DRIFT ADVISORIES 
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT. BE AWARE OF NEARBY NON-TARGET SITES AND 
ENVIRONMENTAL CONDITIONS. 
IMPORTANCE OF DROPLET SIZE 
An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide target pest control. While 
applying larger droplets will reduce spray drift, the potential for drift will be greater if applications are made improperly or under 
unfavorable environmental conditions. 
 
Controlling Droplet Size – Ground Boom 
• Volume - Increasing the spray volume so that larger droplets are produced will reduce spray drift. Use the highest practical 
spray volume for the application. If a greater spray volume is needed, consider using a nozzle with a higher flow rate. 
• Pressure - Use the lowest spray pressure recommended for the nozzle to produce the target spray volume and droplet size. 
• Spray Nozzle - Use a spray nozzle that is designed for the intended application. 
• Consider using nozzles designed to reduce drift. 
BOOM HEIGHT – Ground Boom 
Use the lowest boom height that is compatible with the spray nozzles that will provide uniform coverage. For ground equipment, the 
boom should remain level with the crop and have minimal bounce. 
 
SHIELDED SPRAYERS 
Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify that the shields are not 
interfering with the uniform deposition of the spray on the target area. 
 
TEMPERATURE AND HUMIDITY 
When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation. 
TEMPERATURE INVERSIONS 
Drift potential is high during a temperature inversion. Temperature inversions are characterized by increasing temperature with 
altitude and are common on nights with limited cloud cover and light to no wind. The presence of an inversion can be indicated by 
ground fog or by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves 
laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly 
dissipates indicates good vertical air mixing. Avoid applications during temperature inversions. 
 
 
WIND

[Carabiner EPA Reg No 34704-1130 Page 6] 
Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND CONDITIONS. 
Applicators need to be familiar with local wind patterns and terrain that could affect spray drift. 
WINDBLOWN SOIL PARTICLES 
This product has the potential to move off-site due to wind erosion. Soils that are subject to wind erosion usually have a high silt 
and/or fine to very fine sand fractions and low organic matter content. Other factors which can affect the movement of windblown 
soil include the intensity and direction of prevailing winds, vegetative cover, site slope, rainfall, and drainage patterns. Avoid 
applying this product if prevailing local conditions may be expected to result in off-site movement. 
AERIAL APPLICATION INSTRUCTIONS FOR CORN AND SUGARCANE 
RESTRICTION: This product can be applied aerially only to corn and sugarcane. 
 
This product may be applied aerially for preemergence or postemergence weed control in corn only in the following states: 
Alabama, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Idaho, Illinois, Indiana, Iowa, Kansas, 
Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nevada, New 
Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Nebraska, Ohio, Oklahoma, Oregon, Pennsylvania, 
Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin and 
Wyoming. 
 
This product may be applied aerially for preemergence or postemergence weed control in sugarcane only in the following states: 
Florida, Louisiana and Texas. 
 
Applications must be made in a minimum of 2.0 gallons of water per acre. 
PRE-EMERGENCE GROUND APPLICATION INSTRUCTIONS 
Apply this product preemergence with a carrier volume of 10.0 to 60.0 gal/A. 
Spray nozzles must be uniformly spaced, the same size and type, and must provide accurate and uniform application. Apply in a 
spray volume of 10 to 60 gal/A using water or liquid fertilizer (excluding suspension fertilizers) as the carrier. Use a pump that can 
maintain a pressure of at least 35 to 40 psi at the nozzles and provide proper agitation within the tank to keep the product 
dispersed. Lower pressures may be used with extended range or drift reduction nozzles. 
 
Always ensure that agitation is maintained until spraying is completed, even if stopped for brief periods of time. If the agitation is 
stopped for more than 5 minutes, resuspend the spray solution by running on full agitation prior to spraying. 
POST-EMERGENCE GROUND APPLICATION INSTRUCTIONS 
Spray nozzles must be uniformly spaced, the same size and type, and must provide accurate and uniform application. Good weed 
coverage is essential for optimum weed control. Boom height for broadcast over-the-top applications must be based on the height 
of the crop – at least 15 inches above the crop canopy. 
 
Apply in a spray volume of 10.0 to 30.0 gal/A using water as a carrier. Use a pump that can maintain a pressure of at least 35 to 40 
psi at the nozzles and provide proper agitation within the tank to keep the product dispersed. Lower pressures may be used with 
extended range or drift reduction nozzles. When weed foliage is dense, use a minimum of 20.0 gallons. 
 
Flat fan nozzles of 80° or 110° are advised for optimum postemergence coverage. DO NOT use floodjet nozzles or controlled droplet 
application equipment for postemergence applications. 
Nozzles may be angled forward 45° to enhance penetration of the crop and provide better coverage. Ensure that all in-line strainer 
and nozzle screens in the sprayer are 50-mesh or coarser. 
Always ensure that agitation is maintained until spraying is completed, even if stopped for brief periods of time. If the agitation is 
stopped for more than 5 minutes, resuspend the spray solution by running on full agitation prior to spraying. 
 
USE DIRECTIONS WITH SPRAY ADDITIVES

[Carabiner EPA Reg No 34704-1130 Page 7] 
 
POSTEMERGENCE ADJUVANTS 
When an adjuvant is to be used with this product, the use of an adjuvant that meets the standards of the Council of Producers & 
Distributors of Agrotechnology (CPDA) adjuvant certification program is advised. 
 
The following adjuvant directions are intended primarily for using this product in corn. Refer to the use directions section of each 
crop section for specific adjuvant directions. 
 
POSTEMERGENCE APPLICATIONS TO FIELD CORN AND SEED CORN 
For postemergence applications made after the crop has emerged, add crop oil concentrate (COC) to the spray solution at the rate 
of 1.0 gal/100 gal of water (1.0% v/v). The use of a nonionic surfactant (NIS) at 1.0 qt/100 gallons of water (0.25% v/v) instead of 
COC is allowed, but the weed control achieved with COC is consistently better than NIS. The use of methylated seed oil (MSO) 
adjuvants or MSO blend adjuvants for postemergence applications of this product may cause severe crop injury to occur. DO NOT 
use MSO adjuvants for postemergence use unless directed for a specific tank mix under the TANK MIXTURES FOR CORN section of 
this label, or unless permitted by a supplemental label. In addition to COC, always add spray grade UAN (e.g., 28-0-0) to the spray 
solution at a rate of 2.5% (v/v) or AMS at 8.5 lb/100 gal of spray solution, except if precluded elsewhere on this label or by a 
supplemental label. 
POSTEMERGENCE APPLICATIONS TO SWEET CORN AND YELLOW POPCORN 
DO NOT add UAN or AMS when making postemergence applications of this product to yellow popcorn or sweet corn, or severe 
crop injury may occur. 
 
For postemergence applications to yellow popcorn and sweet corn, the use of a nonionic surfactant (NIS) instead of a crop oil 
concentrate (COC) is advised, to minimize the risk of crop injury. A COC may be used, and will increase the level of weed control 
achieved, especially under dry growing conditions, but the risk of crop injury is increased significantly under lush growing conditions. 
For optimum control, the addition of atrazine is advised wherever rotational or local atrazine restrictions allow. 
 
PREEMERGENCE ADJUVANTS 
For applying this product preplant or preemergence, and where weeds are present, the use of any adjuvant for agricultural use is 
permitted. In these situations, MSO type adjuvants are typically better than COC type adjuvants, which are typically better than 
NIS type adjuvants for enhancing weed control. UAN or AMS can be added and typically provides better weed control than not 
adding one of these. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read 
and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture. 
SPRAY EQUIPMENT CLEANING 
It is important to follow the procedures below for cleaning equipment before spraying a crop other than corn. Mix only as much 
spray solution as is needed. 
 
1. Flush tank, hoses, boom, and nozzles with clean water. 
2. Prepare cleaning solution of 1.0 gallon of household ammonia per 25.0 gallons of water. Commercial spray tank cleaners 
can be used in lieu of ammonia/water solution. 
3. Using a pressure washer, clean the inside of the spray tank with the cleaning solution. Wash ALL parts of the tank, including 
the inside top surface. If a pressure washer is not available, fill the sprayer with the cleaning solution to ensure contact of 
the cleaning solution with all internal surfaces of the tank and plumbing. Start agitation in the spray and recirculate the 
cleaning solution for a minimum of 15 minutes. All visible deposits of spray solution must be removed from the spray tank 
before making any other applications. 
4. Flush hoses, spray lines, and nozzles with cleaning solution for a minimum of 1 minute. 
5. Dispose of rinsate from steps 1 through 3 in an appropriate manner. 
6. Repeat steps 2 through 5. 
7. Remove nozzles, screens, and strainers and clean separately in the ammonia solution after completing the previous steps. 
8. Rinse the complete spray system with clean water. 
MIXING INSTRUCTIONS 
See the Crop Use Directions sections of the label for specific tank mix instructions. 
Always refer to labels of other pesticide products for mixing directions and precautions which may differ from those outlined here. 
Use in accordance with the most restrictive label limitations and precautions.

[Carabiner EPA Reg No 34704-1130 Page 8] 
 
MIXING RESTRICTIONS 
• DO NOT exceed any dosage rates specified on labels. 
• DO NOT mix this product with any product containing a label prohibition against such mixing. 
• DO NOT tank mix this product with any other insecticide, fungicide, fertilizer, or adjuvant not specified on this label without 
first testing compatibility, as poor mixing can occur. Test compatibility on a small scale (including a jar test) before actual 
tank mixing. 
 
MIXING PROCEDURE 
1. Use sprayers in good operating condition with good agitation. Ensure that the sprayer is cleaned according to the label 
instructions of the product label used prior to this product. For post-emergence applications, use clean water only for the 
spray solution. Ensure that all in-line strainers and nozzle screens in the sprayer are 50-mesh or coarser. DO NOT use 
screens finer than 50-mesh. 
2. Use liquid fertilizer (NOT suspension fertilizer) as the carrier for pre-emergence applications. 
3. Start filling spray tank or pre-mix tank with clean water and begin agitation. Maintain constant agitation. 
4. When sprayer or pre-mix is half full of water, add AMS, maintaining agitation until dispersed. 
5. Add this product slowly and agitate until completely dissolved. Wait at least 1 minute after the last of this product has been 
added to allow for complete dispersion. If using cold water, a longer agitation period may be required to ensure adequate 
dispersing. 
6. If tank mixing, add the tank mix product. 
7. Add the adjuvant and UAN, if needed, and continue to fill tank to desired level with water. 
 
WEED CONTROL TABLES 
This product applied as directed in this label will control or partially control the weeds listed in Tables 1 and 2. 
 
Partial control means either erratic control (good to poor control) or control that is below what is generally regarded as acceptable 
control for commercial weed control. 
 
For best post-emergence results, apply this product to actively growing weeds. 
Dry weather following pre-emergence applications may reduce efficacy of residual weed control. If irrigation is available, apply ½-1-
inch water after pre-emergence application. If irrigation is not available, make a uniform shallow cultivation as soon as weeds 
emerge. 
 
This product applied alone or in a tank-mix with atrazine will not provide consistent or adequate control of weeds that are resistant 
to post-emergence HPPD inhibiting herbicides. 
Refer to the crop sections of this label for specific use directions and application rates. 
 
Table 1. Weeds Controlled with Post-Emergence Agricultural Use Applications of this product 
Common Name Scientific Name This product 
3.0 Fl Oz/A 
(0.094 lb. AI/A) 
Applied Along 
This product1 
2.5 to 3.0 Fl Oz/A 
(0.078 to 0.094 lb. AI/A) 
+ Atrazine 
Apply to Weeds <5” Tall2 
Amaranth, palmer Amaranthus palmeri PC+ C+ 
Amaranth, powell Amaranthus powellii C C 
Amaranth, spiny Amaranthus spinosus C C 
Atriplex Chenopodium orach C C 
Broadleaf signalgrass Urochloa platyphylla C+ C+ 
Buckwheat, wild Polygonum convolvulus PC PC 
Buffalobur Solanum rostratum C C 
Burcucumber Sicyos angulatus PC C+ 
Carpetweed Mollugo verticillata C C 
Carrot, wild Daucus carota PC C 
Chickweed, common Stellaria media C C 
Cocklebur, common Xanthum strumarium C C 
Crabgrass, large Digiaria sanguinalis C+ C+ 
Dandelion Taraxacum officinale NC PC

[Carabiner EPA Reg No 34704-1130 Page 9] 
Dock, curly Rumex crispus PC PC 
Galinsoga Galinsoga parviflora C C 
Hemp Cannabis sativa C C 
Horsenettle Solanum carolinense PC C 
Horseweed (marestail) Conyza canadensis PC C 
Jimsonweed Datura stramonium C C 
Knotweed, prostrate Polygonum aviculare PC PC 
Kochia Kochia scoparia PC+ C+ 
Lambsquarters, common Chenopodium album C C 
Mallow, Venice Hibiscus trionum NC C 
Morningglory, entireleaf Ipomoea hederacea PC C 
Morningglory, ivyleaf Ipomoea hederacea PC C 
Morningglory, pitted Ipomoea lacunosa PC C 
Mustard, wild Brassica kaber C C 
Nightshade, black Solanum nigrum C C 
Nightshade, Eastern black Solanum ptychanthum C C 
Nightshade, hairy Solanum sarrachoides C C 
Nutsedge, yellow Cyperus esculentus PC PC 
Pigweed, redroot Amaranthus retroflexus C C 
Pigweed, smooth Amaranthus hybridus C C 
Pigweed, tumble Amaranthus albus C C 
Pokeweed, common Phytolacca americana PC PC 
Potatoes, volunteer Solanum spp. C C 
Pusley, Florida Richardia scabra C+ C+ 
Ragweed, common Ambrosia artemisiifolia PC C 
Ragweed, giant Ambrosia trifida C+ C 
Sesbania, hemp Sesbania exaltata C C 
Sida, prickly (teaweed) Sida spinosa NC C+ 
Smartweed, ladysthumb Polygonum persicaria C+ C 
Smartweed, pale Polygonum lapathifolium C+ C 
Smartweed, Pennsylvania Polygonum pensylvanicum C+ C 
Sunflower, common Helianthus annuus C C 
Thistle, Canada Circium arvense NC PC 
Velvetleaf Abutilon theophrasti C C 
Waterhemp, common Amaranthus rudis C+ C 
Waterhemp, tall Amaranthus tuberculatus C+ C 
1This product tank-mixed with atrazine is approved only for use on corn and sugarcane. 
2Weeds can be controlled at larger than listed sizes; however, to protect crop yield, manage weed resistance, and provide effective 
control, treat weeds before they reach 5” tall. 
+Apply before weeds exceed 3” tall. 
C = Control 
NC = Not Controlled 
PC = Partial Control 
 
Table 2. Weeds Controlled with Pre-Emergence Agricultural Use Applications of this product 
Common Name Scientific Name This product applied alone This product applied + Atrazine* 
Amaranth, palmer Amaranthus palmeri C C 
Amaranth, powell Amaranthus powellii C C 
Amaranth, spiny Amaranthus spinosus C C 
Broadleaf signalgrass Urochloa platyphylla PC PC 
Buffalobur Solanum rostratum C C 
Carpetweed Mollugo verticillata C C 
Chickweed, common Stellaria media C C 
Cocklebur, common Xanthum strumarium PC C 
Cragrass, large Digitaria sanguinalis PC PC 
Galinsoga Galinsoga parviflora C C 
Jimsonweed Datura stramonium C C 
Kochia Kochia scoparia PC C 
Lambsquarters, common Chenopodium album C C 
Morningglory, entireleaf Ipomoea hederacea PC C 
Morningglory, ivyleaf Ipomoea hederacea PC C

[Carabiner EPA Reg No 34704-1130 Page 10] 
Morningglory, pitted Ipomoea lacunosa PC C 
Nightshade, Eastern black Solanum ptychanthum C C 
Nightshade, hairy Solanum sarrachoides C C 
Pigweed, redroot Amaranthus retroflexus C C 
Pigweed, smooth Amaranthus hybridus C C 
Pigweed, tumble Amaranthus albus C C 
Ragweed, common Ambrosia artemisiifolia C C 
Ragweed, giant Ambrosia trifida PC C 
Smartweed, ladysthumb Polygonum persicaria C C 
Smartweed, pale Polygonum lapathifolium C C 
Smartweed, Pennsylvania Polygonum pensylvanicum C C 
Sunflower, common Helianthus annuus PC C 
Velvetleaf Abutilon theophrasti C C 
Waterhemp, common Amaranthus rudis C C 
Waterhemp, tall Amaranthus tuberculatus C C 
* This product tank-mixed with atrazine is approved only for use on corn, grain sorghum and sugarcane. Refer to the crop sections 
on this label for specific use directions. 
C = Control 
PC = Partial Control 
ROTATIONAL CROP INTERVALS 
If this product is applied alone, follow the crop rotation intervals listed below in Table 3. If this product is tank-mixed with other 
products, then follow the most restrictive product’s crop rotation interval. 
 
Table 3. Time Interval between Applying this product and Replanting/Planting of Rotational Crop 
Replant/ 
Rotational 
Interval 
Crop 
 
Anytime 
Asparagus, Corn (all types), Cranberry, Flax, Kentucky bluegrass grown for seed, Pearl Millet, Oats, 
Rhubarb, Ryegrass (perennial and annual) grown for seed, Sorghum (grain and sweet), Soybeans, 
Sugarcane, Tall fescue grown for seed 
4 Months Small grain cereals (wheat, barley, rye) 
10 Months Alfalfa, Blueberry, Canola, Cotton, Currant, Lingonberry, Okra, Peanuts, Peas*, Potato, Rice, Snap Beans*, 
Sunflowers, Tobacco 
18 Months Cucurbits, Dry beans, Red Clover, Sugar Beets, All other crops 
*Plant these rotation crops ONLY if the criteria listed below have been met. If all criteria have NOT been met, plant peas and snap 
beans a minimum of 18 months after applying this product. 
• A minimum of 20 inches of rainfall plus irrigation has occurred between application and planting of the rotational crop. 
• Soil pH is greater than 6.0. 
• 3.0 fl oz/A (0.094 lb AI/A) or less of this product has been applied no later than June 30th of the year preceding rotational 
crop planting. 
• No other HPPD herbicides (e.g., Mesotrione, Glyphosate + Mesotrione + S-Metolachlor, + S-Metolachlor 19% Atrazine 
18.61% + Mesotrione 2.44%, S-Metolachlor 27.1% + Atrazine 9.94%+ Mesotrione 2.71%, Mesotrione + S-Metolachlor, 
Topramezone, Isoxaflutole, Thiencarbazone-methyl + Tembotrione, Thiencarbazone-methyl + Isoxaflutole, or 
Tembotrione) were applied the year prior to planting peas and snap beans. 
 
RESTRICTION: DO NOT plant peas or snap beans on sand, sandy loam, or loamy sand soils in Minnesota or Wisconsin. 
SPECIFIC USE DIRECTIONS 
AGRICULTURAL USES 
ASPARAGUS 
This product can be applied broadcast or banded at a rate of 3.0 to 7.7 fl oz/A (0.094 to 0.24 lb AI/A) to asparagus as a spring 
application prior to spear emergence, as a post-harvest application (after final harvest), or both. 
Use the 3.0 fl oz/A (0.094 lb AI/A) rate for post-emergence control or partial control of the emerged weeds listed in Table 1. Use the 
6.0 to 7.7 fl oz/A (0.19 to 0.24 lb AI/A) rate for pre-emergence control or partial control of the weeds listed in Table 2. For banded 
applications, the application must be made to account for band width, i.e., to deliver 3.0 to 7.7 fl oz (0.094 to 0.24 lb AI) per treated 
acre. For the best pre-emergence weed control with spring applications, this product must be applied after fern mowing, disking or

[Carabiner EPA Reg No 34704-1130 Page 11] 
other tillage operation but prior to asparagus spear emergence. 
When making post-harvest applications, the rate applied pre-emergence in the spring must be considered so as not to exceed the 
7.7 fl oz/A (0.24 lb AI/A) per year rate limit. Post-harvest applications must be made in a way that minimizes contact with any 
standing asparagus spears or ferns and maximizes contact with the weeds and/or soil, e.g., by using a directed or semi-directed type 
application, or crop injury may occur. With post-harvest applications, the use of an adjuvant will increase the risk of crop injury. 
 
If weeds are emerged at the time of applying this product, the addition of a crop oil concentrate (COC) type adjuvant at the rate of 
1% v/v or a non-ionic surfactant (NIS) at the rate of 0.25% v/v is advised. In addition to COC or NIS, a spray grade UAN (e.g., 28-0-0) 
at the rate of 2.5% v/v or ammonium sulfate (AMS) at the rate of 8.5 lb/100 gallons of spray solution may be added for improved 
burndown of emerged weeds. If weeds have not yet emerged, no adjuvant is advised. 
 
Asparagus Restrictions: 
• DO NOT apply more than 7.7 fl oz/A (0.24 lb AI/A) of this product per year. 
• DO NOT apply more than 7.7 fl oz/A (0.24 lb AI/A) in a single application. 
• DO NOT make more than two applications on this product per year when using reduced application rates. 
• Minimum retreatment interval is 14 days. 
 
BLUEGRASS, RYEGRASS (ANNUAL AND PERENNIAL), AND TALL FESCUE GROWN FOR SEED 
This product can be applied to bluegrass, annual ryegrass, perennial ryegrass, or tall fescue which is grown for seed. This product can 
be applied as a pre-emergence application to bare soil (new seeding) or as a post- emergence application to an emerged grass crop. 
Pre-Emergence Applications 
Apply this product as a broadcast, surface spray at a rate of 6.0 fl oz/A (0.19 lb AI/A) to a newly seeded crop. Product application 
must be made prior to crop and weed emergence. Rainfall or irrigation as the newly seeded grass crop emerges from the soil may 
increase the risk of injury from this product. Grass crop injury symptoms include temporary bleaching of newly emerged leaves, or in 
extreme conditions, stunting. For a list of pre-emergence weeds controlled or partially controlled see Table 2. In addition to the 
weeds listed in Table 2, this product applied pre-emergence will control mannagrass. 
Post-Emergence Application 
Apply this product as a broadcast post-emergence spray at a rate of 3.0 to 6.0 fl oz/A (0.094 to 0.19 lb AI/A) to emerged bluegrass, 
perennial ryegrass or tall fescue grown for seed. Use the 3.0 fl oz/A (0.094 lb AI/A) rate for post-emergence control or partial control 
of the weeds listed in Table 1. In addition to the weeds listed in Table 2, this product applied post-emergence will control 
mannagrass (up to 3 tillers). 
Use the 6.0 fl oz/A (0.19 lb AI/A) rate for post-emergence weed control plus extended residual weed control (see Table 2). The 
addition of a crop oil concentrate type adjuvant at 1% v/v or a non-ionic surfactant (NIS) type adjuvant at a rate of 0.25% v/v is 
advised. Post-emergence applications of this product may result in temporary bleaching of the grass crop. 
 
In addition to COC or NIS, a spray grade UAN (e.g., 28-0-0) at the rate of 2.5% v/v or ammonium sulfate (AMS) at the rate of 8.5 
lb/100 gallons of spray solution may also be added for improved control of emerged weeds. The addition of UAN or AMS will 
improve consistency of post-emergence weed control but will also increase the risk of grass crop injury, especially at product rates 
greater than 3.0 fl oz/A (0.094 lb AI/A). If grass crop injury is a concern, do not add UAN or AMS to the spray solution. 
 
Tank mixing other pesticides with this product post-emergence may increase the risk of crop injury. Avoid adding pesticides with 
emulsifiable concentrate (EC) type formulations to this product for applications made post-emergence to the crop. 
Bluegrass, Ryegrass, and Tall Fescue Grown for Seed Restrictions: 
• DO NOT harvest the grass crop for seed or straw within 60 days following the application of this product. 
• DO NOT graze or feed forage from treated areas within 14 days following harvest of seed or straw and at least 74 days 
after application of this product. 
• DO NOT make more than two applications of this product per year. 
• Minimum retreatment interval is 14 days. 
• DO NOT apply more than 6.0 fl oz/A (0.19 lb AI/A) in a single application and not more than 9.0 fl oz/A (0.28 lb AI/A) of 
this product per year. 
• Applications of this product to grasses grown for seed species not listed on this label may result in severe injury.

[Carabiner EPA Reg No 34704-1130 Page 12] 
BUSH AND CANEBERRIES (CROP GROUP 13-07A AND 13-07B) 
Note: Not all cultivars and types of berries that are included within the Environmental Protection Agencies definition of bush and 
caneberries (Crop Subgroups 13-07A and 13-07B) have been tested and shown to have adequate crop safety to mesotrione. Those 
that have been tested, and are believed to be reasonably fit, are listed below along with use directions for that crop. If this product 
is used on bush or caneberries not listed below, severe crop injury may occur. 
This product may be applied as a pre-bloom post-directed spray in high bush blueberry, lingonberry, red currant, black currant, black 
raspberry, red raspberry, and blackberry. For a list of weeds controlled see Tables 1 and 2. This product may be applied in bush or 
caneberries at a rate up to 6.0 fl oz/A (0.19 lb AI/A). If a split application weed control program is desired, 3.0 fl oz/A (0.094 lb AI/A) 
followed by 3.0 fl oz/A (0.094 lb AI/A) may be used, but no more than two applications per year are allowed and not more than 6.0 fl 
oz/A (0.19 lb AI/A) in total per year. If two applications are made, they must be made no closer than 14 days apart. The use of a crop 
oil concentrate (COC) type adjuvant at the rate of 1% v/v is advised, but avoid using COC adjuvants that are injurious to bush or 
caneberry leaves. DO NOT apply this product to bush or caneberries after the onset of the bloom stage or illegal residues may occur. 
 
In low bush blueberries, this product may only be applied in the non-bearing year. This application may be a broadcast application. 
Up to 6.0 fl oz/A (0.19 lb AI/A) of this product may be applied in a single application, or 3.0 fl oz/A (0.094 lb AI/A) followed by 3.0 fl 
oz/A (0.094 lb AI/A) if used in a split application program. No more than two applications per year are allowed and not more than 
6.0 fl oz/A (0.19 lb AI/A) in total per year. If two applications are made, they must be made no closer than 14 days apart. The use of a 
crop oil concentrate (COC) type adjuvant at 1% v/v is advised. Applications of this product during dry weather conditions and/or 
temperatures above 85° can cause injury to low bush blueberries. Applications of this product can cause yellowing or necrosis of 
leaves and under severe conditions, leaf drop may occur especially on “Sourtop” variety blueberries. 
 
Bush & Caneberry Restrictions: 
• DO NOT make more than two applications of this product per year when using reduced application rates. 
• DO NOT apply more than 6.0 fl oz/A (0.19 lb AI/A) in a single application. 
• DO NOT apply more than 6.0 fl oz/A (0.19 lb AI/A) per year. 
• If two applications are made, they must be made no closer than 14 days apart. 
CORN 
Apply this product by ground for pre-emergence or post-emergence weed control in field corn, seed corn, yellow popcorn, and 
sweet corn. Apply this product to corn up to 30” tall or up to the 8-leaf stage of corn growth to control broadleaf and grass weeds 
listed in Tables 1 and 2. 
 
Aerial applications of this product can be made pre-emergence or post-emergence in the following states: Alabama, Arizona, 
Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, 
Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New 
Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode 
Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin, and 
Wyoming. 
See seed company instructions for use on field corn inbred lines. Special adjuvant restrictions must be followed for post- emergence 
applications of this product in yellow popcorn or sweet corn (see the Spray Additives section of this label). 
Post-emergence application of this product to yellow popcorn and sweet corn hybrids may cause crop bleaching. Bleach is transitory 
and will not affect final yield or quality. Herbicide sensitivity, however, can vary widely in yellow popcorn and sweet corn, and all 
hybrids of these have not been tested. Contact your local popcorn/sweet corn company, Fieldman, or University Specialist to learn 
about hybrid directions before making a post-emergence application of this product to yellow popcorn or sweet corn. DO NOT 
include nitrogen-based adjuvants (UAN or AMS) when making post-emergence applications of this product to yellow popcorn or 
sweet corn. 
 
Temporary transient bleaching may occur in field corn treated with this product post-emergence under extreme weather conditions 
or when the crop is under stress. Field corn will quickly outgrow this condition and develop normally. 
 
Corn Restrictions: 
• DO NOT apply more than 7.7 fl oz/A (0.24 lb AI/A) of this product per year. 
• DO NOT make more than 2 applications per year. 
• DO NOT exceed 7.7 fl oz (0.24 lb AI/A) in a single pre-emergence application.

[Carabiner EPA Reg No 34704-1130 Page 13] 
• DO NOT exceed 3.0 fl oz (0.094 lb AI/A) in a single post-emergence application. 
• Minimum retreatment interval is 14 days. 
• DO NOT feed or harvest forage, grain, or stover within 45 days after application. 
• DO NOT apply this product to white popcorn or ornamental (Indian) corn. 
This Product Used Alone – Post-Emergence 
Apply 3.0 fl oz/A (0.094 lb AI/A) per application. Always add an appropriate adjuvant to the spray tank (see the Spray Additives 
section of this label). 
Apply to actively growing weeds. See Table 1 for a complete list of weeds controlled. Susceptible weeds that emerge post-
application may be controlled after the herbicide is absorbed into the soil. This product will not control most grass weeds. 
Two post-emergence applications of this product may be made under the following restrictions: 
• Only one post-emergence application may be made if this product has been applied pre-emergence. Do not exceed a total 
of 7.7 fl oz/A (0.24 lb AI/A) per year. 
• Minimum retreatment interval is 14 days. 
• Applications made at rates lower than 3.0 fl oz/A. (0.094 lb AI/A) post-emergence may not provide adequate weed control 
and may result in reduced residual control. 
• DO NOT exceed a total of 6.0 fl oz/A (0.19 lb AI/A) for the two post-emergence applications. 
• If a post-emergence application of this product was made to ground that received pre-emergence treatment of another 
mesotrione-containing herbicide, atrazine must be tank mixed with this product. 
• If mixing this product with atrazine, do not apply to corn taller than 12”. 
• Treat corn up to 30” tall or up to the 8-leaf stage of growth. 
• DO NOT harvest, forage, or stover within 45 days post-application. 
This Product Used Alone – Pre-Emergence 
Apply 6.0 to 7.7 fl oz/A (0.19 to 0.24 lb AI/A) by ground sprayer in 10.0 to 30.0 gallons of water per acre to control broadleaf weeds 
(up to 80.0 gallons if applied with liquid fertilizer). See Table 2 for a complete list of weeds controlled. This product can be tank 
mixed with other approved pre-emergence grass herbicides to control grasses. Refer to the tank mix section for a list of tank-mix 
partners. 
 
Tank Mixtures for Corn 
Apply this product in tank mix with other registered herbicides to improve spectrum of weed control in burndown, pre-emergence, 
or post-emergence applications. These tank mixtures can also be used to include a different mode of action herbicide to control and 
manage the development of resistant weed biotypes. 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable 
restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive 
directions for use and precautionary statements of each product in the tank mixture. 
 
Burndown Tank Mixtures in Corn 
Apply this product in tank mixture with other registered herbicides for burndown and residual weed control. 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable 
restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive 
directions for use and precautionary statements of each product in the tank mixture. 
 
Apply 3.0 fl oz/A (0.094 lb AI/A) product with paraquat dichloride, glyphosate-isopropylammonium, dicamba, diglycolamine salt, 
and/or for improved broadleaf weed control with limited residual control before planting corn and before corn emergence. For 
better residual control, apply 6.0 to 7.7 fl oz/A (0.19 to 0.24 lb AI/A) of this product (see Table 2) with the products listed. Use the 
adjuvant system specified by the burndown herbicide. Refer to individual product labels for precautionary statements, restrictions, 
rates, approved uses, and a list of weeds controlled. 
 
Pre-Emergence Tank Mixture in Corn 
Apply 5.3 to 7.7 fl oz/A (0.17 to 0.24 lb AI/A) of this product in tank mixture with other registered herbicides (Tank Mixtures for Pre-
Emergence Application in Corn) for pre- emergence residual weed control. Refer to Table 2 for a list of weeds controlled by this 
product applied pre-emergence.

[Carabiner EPA Reg No 34704-1130 Page 14] 
Tank Mixtures for Pre-Emergence Application in Corn 
Refer to the individual product labels of the products listed for precautionary statements, restrictions, use rates, approved uses, and 
a list of weeds controlled. 
 
Acetochlor 
Acetochlor + Atrazine 
Atrazine 
Atrazine + dimethenamide-P 
Atrazine + glyphosate-isopropylammonium + S-Metolachlor 
Atrazine + S-Metolachlor 
Dimethenamide-P 
S-Metolachlor 
Pendimethalin 
 
Post-Emergence Tank Mixtures in Corn 
See Table 4 below for a list of tank mixtures that can be applied after corn has emerged. DO NOT apply less than 3.0 fl oz/A (0.094 lb 
AI/A) of this product unless specified on this label, as a loss of residual control can occur. 
Always add an appropriate adjuvant to the spray tank (See the Spray Additives section of this label). Refer to the individual product 
labels for precautionary statements, restrictions, rates, approved uses, and a list of weeds controlled. Not all the tank mix pesticides 
listed are registered for use on field corn, yellow popcorn, or sweet corn. 
 
Table 4. Tank Mixtures for Post-Emergence Application to Corn 
Refer to the individual product labels for products listed for precautionary statements, restrictions, use rates, approved uses, and a 
list of weeds controlled. 
Tank Mix Partner Use Directions 
Atrazine See Table 1 for application rates and list of weeds controlled. 
Atrazine + Glyphosate-
isopropylammonium + S-
Metolachlor 
Use only on Agrisure® GT corn or Roundup Ready® corn. 
Crop death will occur if this mixture is applied to a corn hybrid that is not designated as 
Agrisure® GT or Roundup Ready®. 
DO NOT add urea ammonium nitrate (UAN) or methylated seed oil (MSO) adjuvants to 
this mixture or crop injury can occur. 
Atrazine + S-Metolachlor DO NOT use nitrogen-based adjuvants (UAN or AMS); apply as post-directed spray. 
DO NOT use crop oil concentrate (COC); use a non-ionic surfactant (NIS) to avoid crop 
injury. Control of emerged weeds can be reduced due to the adjuvant effect on weed 
coverage. 
Citric acid 
Atrazine + Nicosulfuron + 
Rimsulfuron 
This mixture will provide additional weed control. Refer to the product label for a list 
of weeds controlled. 
Rimsulfuron + Thifensulfuron 
methyl 
Bromoxynil octanoate This mixture will provide additional broadleaf weed control. 
Refer to the product label for use rates. 
Dicamba, Sodium salt + 
Primisulfuron-methyl 
This mixture will control additional weeds. See product label for list of weeds 
controlled. 
Glufosinate Use only on corn designated as LibertyLink®. 
Use of this mixture on corn hybrids not designated as LibertyLink® will result in severe 
crop injury or death. 
DO NOT use crop oil concentrate (COC) as an adjuvant or crop injury can occur. 
Glyphosate Use only on corn Agrisure® GT corn or Roundup Ready® corn. 
Use of this mixture on corn hybrids that are not designated as Agrisure® GT or 
Roundup Ready® will result in crop death. Add spray-grade ammonium sulfate (AMS) 
at a rate that delivers 8.5 to 17.0 lb of AMS/100 gal of water. 
If the glyphosate product calls for an adjuvant in addition to AMS, add 0.25 to 0.5% v/v 
(1.0 to 2.0 qt/100 gal) of a non-ionic surfactant (NIS).

[Carabiner EPA Reg No 34704-1130 Page 15] 
 DO NOT add urea ammonium nitrate (UAN), crop oil concentrate (COC) or methylated 
seed oil (MSO) adjuvants to this tank mixture or crop injury can occur. 
Imazapyr + Imazethapyr Use only on corn designated at Clearfield® corn. 
Use of this mixture on corn hybrids not designated as Clearfield® will result in severe 
crop injury or death. 
DO NOT use Methylated Seed Oil (MSO) or any MSO blend with this mixture or severe 
crop injury can occur. 
Nicosulfuron This mixture will provide additional grass control. Refer to the product label for a list 
of weeds controlled. 
Nicosulfuron + Rimsulfuron This mixture will control additional weeds. See product label for list of weeds 
controlled. Nicosulfuron + Rimsulfuron + 
Atrazine 
Nicosulfuron + Thifensulfuron-
methyl 
This mixture will control additional weeds. See product label for list of weeds 
controlled. 
Primisulfuron-methyl + Prosulfuron This mixture will control additional weeds. See product label for list of weeds 
controlled. 
Prosulfuron This mixture will control additional weeds. See product label for list of weeds 
controlled. 
Sodium salt of bentazon This mixture will provide additional broadleaf weed control. Refer to the product label 
for a list of weeds controlled. 
 
CITRUS FRUIT, POME FRUIT, STONE FRUIT AND TREE NUTS 
This product may be used for postemergence and residual control of weeds listed in Tables 1 and 2 in the following crops. 
Citrus fruit – group 10-10 (Australian desert lime, Australian finger lime, Australian round lime, Brown River finger lime, 
calamondin, citron, citrus hybrids, grapefruit, Japanese summer grapefruit, kumquat, lemon, lime, Mediterranean 
mandarin, sour orange, sweet orange, pummelo, Russell River lime, Satsuma mandarin, sweet lime, Tachibana orange, 
Tahiti lime, tangelo, tangerine (Mandarin), tangor, trifoliate orange, uniq fruit, cultivars, varieties and/or hybrids of these) 
 
Pome fruit – group 11-10 (apple; azarole; crabapple; loquat; mayhaw; medlar; pear; pear, Asian; quince; quince, Chinese ;quince, 
Japanese; tejocote; cultivars, varieties and/or hybrids of these) 
Stone fruit – group 12-12 (apricot; apricot, Japanese; capulin; cherry, black; cherry, Nanking; cherry, sweet; cherry, tart; 
Chinese jujube; nectarine; peach; plum; plum, American; plum, beach; plum, Canada; plum, cherry; plum, Chickasaw; 
plum, Damson; plum, Japanese; plum, Klamath; plum, prune; plumcot; sloe; cultivars; varieties and/or hybrids of these) 
 
Tree nuts – group 14-12 (African nut-tree; almond; beech nut; Brazil nut; Brazilian pine; bunya; bur oak; butternut; Cajou 
nut; candlenut; cashew; chestnut; chinquapin; coconut; Coquito nut; Dika nut; ginkgo; Guiana chestnut; hazelnut (filbert); 
heartnut; hickory nut; Japanese horse-chestnut; macadamia nut; Mongongo nut; monkey puzzle nut; monkeypot; Okari nut; 
Pachira nut; peach palm nut; pecan; pequi; pili nut; pine nut; pistachio; Sapucaia nut; tropical almond; walnut, black; walnut, 
English; yellowhorn; cultivars, varieties and/or hybrids of these) 
Precautions: 
• Avoid crop injury by applying the spray to the grove or orchard floor and to the weeds, while avoiding contact with crop 
foliage, stems or fruit. 
• Contact of this product with crop can result in bleaching injury that is typically temporary. 
• Use trunk guards to protect plants until adequate bark has developed. 
• Specified rates are based on broadcast treatment. For band applications around trees in fruit or nut plantings, reduce the 
broadcast rate of this product and carrier per acre in proportion to the area actually sprayed. (See Banded Applications 
Section) 
 
Restrictions: 
• Apply this product only to pome fruit, stone fruit and nut trees that have been established for a minimum of 12 months. 
This product can be applied in citrus trees or plantings that are less than 12 months old and are exhibiting normal growth 
and vigor. 
• DO NOT apply in stressed orchards - stressed due to poor weather or other abiotic factors. 
• DO NOT exceed a total of 12.0 fl oz/A (0.38 lb AI/A) of this product per year or in a 12-month period. 
• DO NOT exceed 6.0 fl oz/A (0.19 lb AI/A) of this product for the first application.

[Carabiner EPA Reg No 34704-1130 Page 16] 
• DO NOT exceed 3 applications per year or in a 12-month period when using reduced application rates. 
• Allow at least 5 months between applications of this product at 6.0 fl oz/A (0.19 lb AI/A) and at least 6 weeks between 
applications of 6.0 fl oz/A (0.19 lb AI/A) and subsequent applications of 3.0 fl oz/A (0.094 lb AI/A). (Applications must follow 
one of the four programs listed in Table 5 below.) 
• Pome fruit, stone fruit or tree nuts Pre-Harvest Interval (PHI) is 30 days. 
• Citrus Pre-Harvest Interval (PHI) is 1 day. 
• DO NOT use on soils with greater than 20% gravel. 
• DO NOT apply this product through any type of irrigation system. 
• DO NOT apply this product by air. 
Spray Adjuvants 
For application to emerged weeds, the use of COC (crop oil concentrate) type adjuvant at 1% v/v or NIS (non-ionic surfactant) at 
0.25% v/v is advised. Addition of AMS (ammonium sulfate) or other nitrogen-based adjuvants will increase efficacy when used in 
combination with COC or NIS. For more information see Spray Adjuvants section on this label. 
 
Banded Applications 
When applying a row or banded treatment of this product, the following formula may be used to calculate the amount per 
acre: 
 
band width in inches 
row width in inches 
x broadcast rate per acre = amount needed per acre of field 
 
Tank Mix Instructions 
This product may be mixed and applied in combination with most commonly used herbicides registered for use in the approved 
crops to expand the postemergence weed control – spectrum and residual activity. Acceptable tankmix partners 
include: 
• Alion® (EPA Reg. No. 264-1106, indaziflam) 
• Diuron 4L Herbicide (EPA Reg. No. 34704-854, diuron) 
• Forfeit 280 (EPA Reg. No. 34704-1080, glufosinate) 
• GoalTender® (EPA Reg. No. 62719-447, oxyfluorfen) 
• Hyvar® (EPA Reg. No. 432-1546, bromacil) 
• Krovar® (EPA Reg. No. 5481-635, bromacil + diuron) 
• Mad Dog K6 (EPA Reg. No. 34704-1111, Glycine, N-(phosphonomethyl)- potassium salt) 
• Mad Dog Plus (EPA Reg. No. 34704-890, Glyphosate-isopropylammonium) 
• ParaQ (EPA Reg. No. 34704-1117, paraquat-dichloride) 
• Simazine 4L (EPA Reg. No. 34704-687, simazine) 
• Solicam®(EPA Reg. No. 61842-41, norflurazon) 
• Stealth (EPA Reg. No. 34704-868, pendimethalin) 
• Surflan® (EPA Reg. No. 70506-43, oryzalin) 
• Tetris™ SG (EPA Reg. No. 91234-85, rimsulfuron) 
Tank mixtures can be effective tools to help control or manage the development of resistant weeds. The application of mixtures or 
sequences of effective herbicides, with different sites of action, can provide the diversity needed for management of herbicide 
resistance. 
Refer to individual product labels for precautionary statements, restrictions, rates, approved uses and a list of weeds controlled. 
Weed Control (Table 1 and 2) 
This product provides both preemergence and postemergence control of susceptible weeds. Best control is obtained from 
preemergence applications before germination of seed or as postemergence applications are made before weeds reach 5” in height. 
Susceptible weeds are listed in Tables 1 and 2 of this label. Rainfall or irrigation soon after application will enhance preemergence 
activity. 
USE DIRECTIONS 
Apply as a directed or shielded spray. Avoid contact with trunk surfaces, fruit or crop foliage. DO NOT apply when nuts or fruits are 
on the ground at harvest. Ensure that soil is firm, settled and relatively free of trash at time of application. Also ensure that the soil is 
free of depressions around trees where rain or irrigation water can concentrate. Apply the first application of this product in late 
fall/early winter or spring and subsequent applications utilizing one of the programs noted in the Table 5.

[Carabiner EPA Reg No 34704-1130 Page 17] 
Table 5. Application Programs, Rates and Intervals 
Program Application Rate in fl oz/A (lb AI/A) Application interval (in wks) 
1st Application 2nd Application 3rd Application 
1 6.0 (0.19) 6.0 (0.19) - 20 
2 6.0 (0.19) 3.0 (0.094) - 6 
3 6.0 (0.19) 3.0 (0.094) 3.0 (0.094) 6 
4 3.0 (0.094) 3.0 (0.094) 3.0 (0.094) 6 
 
Apply this product in a spray volume of 10.0 to 40.0 gallons per acre. 
 
For effective residual weed control, this product must be moved into the weed seed germination zone. For preemergence weed 
control, apply this product before rainfall or irrigation. For optimum residual control, this product can be tank-mixed with residual 
herbicides including: 
• Alion® (EPA Reg. No. 264-1106, indaziflam) 
• Diuron 4L Herbicide (EPA Reg. No. 34704-854, diuron) 
• Goal Tender® (EPA Reg. No. 62719-447, oxyfluorfen) 
• Hyvar® (EPA Reg. No. 432-1546, bromacil) 
• Krovar® (EPA Reg. No. 5481-635, bromacil + diuron) 
• Simazine 4L (EPA Reg. No. 34704-687, simazine) 
• Solicam®(EPA Reg. No. 61842-41, norflurazon) 
• Stealth (EPA Reg. No. 34704-868, pendimethalin) 
• Tetris™ SG (EPA Reg. No. 91234-85, rimsulfuron) 
For optimum postemergence weed control, apply this product before weeds exceed 5” in height to actively growing weeds in tank 
mixture with burndown herbicides including: 
• ParaQ (EPA Reg. No. 34704-1117, paraquat-dichloride) 
• Glyphosate products, including: 
o Mad Dog K6 (EPA Reg. No. 34704-1111, Glycine, N-(phosphonomethyl)- potassium salt) 
o Mad Dog Plus (EPA Reg. No. 34704-890, Glyphosate-isopropylammonium) 
• Forfeit 280 (EPA Reg. No. 34704-1080, glufosinate) 
• GoalTender (EPA Reg. No. 62719-447, oxyfluorfen) 
Subsequent application(s) of this product can be made alone or in tank mixture, with the herbicides noted above, if weed 
emergence occurs. 
 
Refer to individual product labels for precautionary statements, restrictions, rates, approved uses and a list of weeds controlled. 
 
CRANBERRY 
Apply this product to bearing or non-bearing cranberry beds to control or suppress the weeds listed in Tables 1 and 2, and: 
• bog St. John’s wort (Hypericum boreale) 
• rushes (Juncus canadensis, J. effuses, J. bufonulus, J. tenuis) 
• sedges spp. (Carex spp.) 
• silverleaf (Potentilla pacifica) 
• yellow loosestrife (Lysimachia terrestris) 
RESTRICTIONS for Bearing/Non-Bearing Application Rates: 
• Apply up to 8.0 fl oz/A (0.25 lb AI/A) in a single application, but do not apply more than 16.0 fl oz/A (0.50 lb AI/A) in total 
per year. 
• DO NOT make more than two applications per year. 
• If two applications are made, do not make them closer than 14 days apart. Use 1% v/v of a crop oil concentrate (COC) or 
0.25% v/v non-ionic surfactant (NIS). 
• DO NOT use COC adjuvants that are known to injure cranberry leaves. 
• Non-bearing Cranberries: Apply after the bud break stage no less than 45 days before flooding in fall or winter. 
• Bearing Cranberries: Apply after the bud break stage no less than 45 days before flooding or harvest. 
This product can be applied through irrigation systems (chemigation) including center pivot or solid set.

[Carabiner EPA Reg No 34704-1130 Page 18] 
Cranberry Restrictions: 
• DO NOT make more than two applications of this product per year. 
• DO NOT apply more than 8.0 fl oz/A (0.25 lb AI/A) in a single application. 
• DO NOT apply more than 16.0 fl oz/A (0.50 lb AI/A) per year. 
• If two applications are made, they must be made no closer than 14 days apart. 
Sprinkler Irrigation Application – Cranberries Only 
Check the irrigation system to ensure uniform application of water to all areas. Thorough coverage of foliage is required for optimal 
control. Maintain good agitation in the pesticide supply tank prior to and during the entire application process. Inject the specified 
rate of this product into the irrigation system with a metering device designed to introduce a constant flow and that will distribute 
the product to target areas in 0.1 to 0.2 acre-inch of water. Use the least amount of water with this rate range required for proper 
distribution and coverage. 
After application is complete, flush the entire irrigation and injection systems with clean water before stopping the system. If 
application is being made during a normal irrigation set of a stationary sprinkler, the specified rate of this product for the area 
covered needs to be injected into the system only during the end of the irrigation set for sufficient time to provide optimal coverage 
and distribution. 
 
CHEMIGATION USE PRECAUTIONS – SPRINKLER IRRIGATION APPLICATION 
Apply this product through center pivot or solid set sprinkler irrigation systems only. DO NOT apply this product through any other 
type of irrigation system. 
 
Non-uniform distribution of treated water can cause crop injury, product ineffectiveness, and/or illegal pesticide residues in the 
crop. Contact State Extension Service Specialists, equipment manufacturers or other experts if you have questions about calibrating 
equipment. 
 
DO NOT connect an irrigation system or greenhouse system used for pesticide application to any public water system. A public 
water system is any system used for provision to the public of piped water for human consumption if such system has at least 15 
service connections or regularly serves an average of at least 25 individuals daily at least 60 days out of the year. A person 
knowledgeable of the chemigation system and responsible for its operation or under the supervision of the responsible personal 
shall shut the system down and make necessary adjustments if the need arises. 
The system must contain a functional check valve, vacuum relief valve, and low pressure drain appropriately located on the irrigation 
pipeline to prevent water source contamination from back-flow. The pesticide injection pipeline must contain a functional, 
automatic, quick-closing check valve to prevent the flow of fluid back toward the injection pump. 
The pesticide injection pipeline must also contain a functional, normally closed solenoid-operated valve located on the intake side of 
the injection pump and connected to the system interlock to prevent fluid from being withdrawn from the supply tank when the 
irrigation system is either automatically or manually shut down. The system must contain functional interlocking controls to 
automatically shut off the pesticide injection pump when the water pump motor stops. The irrigation line or water pump must 
include a functional pressure switch which will stop the water pump motor when pressure decreases to the point where pesticide 
distribution is adversely affected. Systems must also use a metering pump, including a positive displacement injection pump (e.g., 
diaphragm pump) effectively designed and constructed of materials that are compatible with pesticides and are capable of being 
fitted with a system interlock. 
Any alternatives to the above required safety devices must conform to the list of EPA-approved alternative devices. 
 
CHEMIGATION USE RESTRICTIONS – SPRINKLER IRRIGATION APPLICATION: 
• DO NOT apply this product through any other type of irrigation system. 
• DO NOT apply when wind speed favors drift beyond the area intended for treatment or non-uniform distribution of treated 
water. 
• DO NOT apply directly to water or areas where surface water is present outside the bog system. 
• DO NOT contaminate water when disposing of equipment washwater or rinsate. 
• DO NOT apply within 10 feet of surface water outside the bog system. 
• DO NOT spray to runoff.

[Carabiner EPA Reg No 34704-1130 Page 19] 
FLAX 
This product may be applied pre-emergence in flax, i.e., after planting but before crop emergence, at a rate up to 6.0 fl oz/A (0.19 lb 
AI/A). For a list of weeds controlled see Tables 1 and 2. DO NOT apply more than one application, and not more than 6.0 fl oz/A 
(0.19 lb AI/A), per year in flax. If weeds are emerged at the time of application, the use of a crop oil concentrate (COC) type adjuvant 
at the rate of 1% v/v is advised. In addition, a spray grade UAN (e.g., 28-0-0) at the rate of 2.5% (v/v) or AMS at the rate of 8.5 
lbs/100 gallons of spray solution may be added to improve the burndown of existing weeds. Applications of this product to emerged 
flax can result in severe crop injury. 
 
Flax Restrictions: 
• DO NOT make more than one application of this product per year. 
• DO NOT apply more than 6.0 fl oz/A (0.19 lb AI/A) in a single application. 
• DO NOT apply this product more than 6.0 fl oz/A (0.19 lb AI/A) per year. 
OATS 
This product can be applied pre-emergence or post-emergence (but not both) for weed control in oats. 
 
For pre-emergence control or partial control of the weeds listed in Table 2, apply this product broadcast at a rate of 6.0 fl oz/A (0.19 
lb AI/A) prior to oat emergence. For best pre-emergence weed control, the product application must be made prior to weed 
emergence. 
 
For post-emergence (after oat emergence) control or partial control of the weeds listed in Table 1, apply this product at a rate of 3.0 
fl oz/A (0.094 lb AI/A). For best results, this product must be applied to emerged weeds that are less than 5” tall. Post-emergence 
applications of this product may result in temporary injury of the oat crop. Injury symptoms may include leaf bleaching, leaf burn 
and in extreme conditions, stunting. 
If emerged weeds are present at the time of applying this product, the addition of a crop oil concentrate (COC) type adjuvant at a 
rate of 1% v/v or a non-ionic surfactant (NIS) type adjuvant at a rate of 0.25% v/v is advised. In addition to COC or NIS, a spray grade 
UAN (e.g., 28-0-0) at the rate of 2.5% v/v or ammonium sulfate (AMS) at the rate of 8.5 lb/100 gallons of spray solution may be 
added for improved weed control. If emerged weeds are not present at the time of applying this product, no additives are advised. If 
oat injury is a concern, eliminating the use of UAN or AMS will reduce the risk for post-emergence crop injury. Additionally, the use 
of NIS instead of COC will also reduce the oat injury risk. However, weed control is also reduced if UAN or AMS is eliminated and 
when switching from COC to NIS. 
 
Tank mixing other pesticides with this product post-emergence may increase the risk of injury. Avoid adding pesticides with 
emulsifiable concentrate (EC) type formulations to this product for applications made post-emergence to the crop. 
Oat Restrictions: 
• DO NOT graze or feed forage from treated areas within 30 days following an application of this product. 
• DO NOT harvest oats within 50 days following the application of this product. 
• DO NOT make more than one application of this product per year. 
• DO NOT apply this product pre-emergence (prior to oat emergence) at more than 6.0 fl oz/A (0.19 lb AI/A) per year. 
• DO NOT apply this product post-emergence at more than 3.0 fl oz/A (0.094 lb AI/A) per year. 
• If the oat crop treated with this product is lost or destroyed, oats may be replanted immediately. If this product was 
applied to the lost oat crop, no additional product can be applied to the replanted oat crop. 
OKRA 
This product can be applied as a row-middle or a hooded post-direct treatment (but not both) for weed control in okra. 
Pre-Emergence Row-Middle Applications 
Apply this product at a rate of 6.0 fl oz/A (0.19 lb AI/A) as a banded application to the row middles prior to weed emergence. For this 
banded application, leave one foot of untreated area over the okra row or 6 inches to each side of the planted row. For banded 
applications, the application must be made to account for band width, i.e., to deliver 6.0 fl oz (0.19 lb AI) per treated acre. DO NOT 
apply this product directly over the planted okra row or severe crop injury may occur. Injury risk is greatest on coarse textured soils 
(sand, sandy loam or loamy sand). 
 
Post-Emergence Hooded Applications 
Apply this product at a rate of 3.0 fl oz/A (0.094 lb AI/A) as a post-emergence directed application using a hooded sprayer for control

[Carabiner EPA Reg No 34704-1130 Page 20] 
or partial control of the weeds listed in Table 1. Okra must be at least 3 inches tall at the time of this application. It is advised that a 
non-ionic surfactant (NIS) type adjuvant at a rate of 0.25% v/v be added to the spray solution. For post-emergence hooded 
applications, the spray equipment must be set up to minimize the amount of this product that contacts the okra foliage or crop 
injury will occur. For best post-emergence results, this product must be applied to actively growing weeds. 
 
Okra Restrictions: 
• DO NOT harvest okra within 28 days following the application of this product. 
• DO NOT make more than one application of this product per year. 
• DO NOT apply this product as a row-middle application at more than 6.0 fl oz (0.19 lb AI) per acre per year. 
• DO NOT apply this product as a post-directed application at more than 3.0 fl oz (0.094 lb AI) per acre per year. 
• DO NOT apply more than 6.0 fl oz/A (0.19 lb AI/A) in a single application. 
• DO NOT apply this product as a broadcast pre-emergence or broadcast post-emergence application to okra or severe 
injury will occur. 
• If the okra crop treated with this product is lost or destroyed, okra can be replanted only in the soil band that was not 
treated with this product. 
PEARL MILLET 
This product may be applied pre-emergence in pearl millet, i.e., after planting but before crop emergence, at a rate up to 6.0 fl oz/A 
(0.19 lb AI/A). For a list of weeds controlled see Table 2. DO NOT apply more than one application, and not more than 6.0 fl oz/A 
(0.19 lb AI/A) per year in pearl millet. If weeds are emerged at the time of application, the use of a crop oil concentrate (COC) type 
adjuvant at the rate of 1% v/v is advised. In addition, a spray grade UAN (e.g., 28-0-0) at the rate of 2.5% (v/v) or AMS at the rate of 
8.5 lb/100 gal of spray solution may be added to improve the burndown of existing weeds. Applications of this product to emerged 
pearl millet can result in severe crop injury. 
Pearl Millet Restrictions: 
• DO NOT make more than one application of this product per year. 
• DO NOT apply more than 6.0 fl oz/A (0.19 lb AI/A) in a single application. 
• DO NOT apply more than 6.0 fl oz/A (0.19 lb AI/A) per year. 
RHUBARB 
This product can be applied prior to crop emergence for weed control in established rhubarb. 
Apply this product at a rate of 6.0 fl oz/A (0.19 lb AI/A) to dormant (prior to any spring green-up) rhubarb for control or partial 
control of the weeds listed in Table 2. If weeds are emerged at the time of application, it is advised that a crop oil concentrate (COC) 
type adjuvant at 1% v/v or a non-ionic surfactant (NIS) type adjuvant at a rate of 0.25% v/v be added to the spray solution. 
Applications of this product to rhubarb that is not dormant may result in a temporary bleaching symptomology. Rainfall or irrigation 
after the product application may increase the risk of injury to emerging rhubarb. 
 
Rhubarb Restrictions: 
• DO NOT harvest rhubarb within 21 days following the application of this product. 
• DO NOT make more than one application of this product per year. 
• DO NOT apply more than 6.0 fl oz/A (0.19 lb AI/A) in a single application. 
• DO NOT apply more than 6.0 fl oz/A (0.19 lb AI/A) per year. 
SORGHUM (GRAIN and SWEET) 
Pre-Emergence Application Directions 
Make pre-emergence application of this product or pre-plant non-incorporated applications up to 21 days before planting sorghum 
for control or partial control of the weeds listed in Table 2. 
 
Apply 6.0 to 6.4 fl oz/A (0.19 to 0.20 lb AI/A) broadcast non-incorporated application prior to sorghum emergence. Making the 
application less than 7 days before planting will increase the risk of plant injury, especially if rainfall or irrigation occurs after the 
application. Injury symptoms include temporary bleaching of newly emerged leaves. Making application of this product 8 to 21 days 
prior to planting will decrease risk of crop injury. 
 
If this product is applied prior to planting, minimize disturbance of soil treated with herbicide during the planting process to reduce 
the potential for weed emergence.

[Carabiner EPA Reg No 34704-1130 Page 21] 
 
If emerged weeds are present at the time of pre-emergence application, use 0.25% v/v of a non-ionic surfactant (NIS) adjuvant or 1% 
v/v of crop oil concentrate (COC) and add it to the spray solution. A spray-grade UAN applied at a rate of 2.5% v/v or 8.5 lb/100 
gallons of spray solution of ammonium sulfate (AMS) can be added to the spray solution in addition to the COC or NIS. 
 
Pre-Emergence Sorghum Application Restrictions: 
• DO NOT make more than one application of this product per year. 
• DO NOT apply more than 6.4 fl oz/A (0.2 lb AI/A) in a single application. 
• DO NOT apply more than 6.4 fl oz/A (0.2 lb AI/A) per year. 
• DO NOT apply to emerged sorghum or severe crop injury can occur. 
• DO NOT use this product in the production of forage sorghum, sudangrass, sorghum-sudangrass hybrids, or dual-purpose 
sorghum. 
• DO NOT apply to sorghum that is grown on coarse textured soils (e.g., sandy loam, loamy sand, sand). 
• Texas Restriction: DO NOT apply to sorghum grown south of Interstate 20 (I-20) or east of Highway 277. 
 
Post-Emergence Application Directions 
Apply this product post-directed to grain sorghum to control and/or partially control weeds listed in Table 1. Apply to actively 
growing weeds for optimal control. 
 
Apply 3.0 fl. oz/A (0.094 lb. AI/A) post-directed application when sorghum is at least 8” tall. Make the application by directing the 
spray between crop rows, and toward the base of the plant. Direct application of this product onto foliage can result in crop injury 
including temporary bleaching. If leaves do bleach, newly emerged leaves following application will not be affected. 
 
Use 0.25% v/v of a non-ionic surfactant (NIS) adjuvant or 1% v/v of crop oil concentrate (COC) and add it to the spray solution. A 
spray-grade UAN applied at a rate of 2.5% v/v or 8.5 lb/100 gallons of spray solution of ammonium sulfate (AMS) can be added to 
the spray solution in addition to the COC or NIS. 
 
This product can be tank-mixed with herbicides registered for use on sorghum to improve weed control. These tank-mixtures can 
also include a herbicide with a different mode of action to help control or manage the development of resistant weed biotypes. 
Post-Directed Restrictions: 
• DO NOT make more than one post-directed application per year. 
• DO NOT apply more than 3.0 fl oz/A (0.094 lb AI/A) in a single post-directed application. 
• DO NOT apply more than 6.4 fl oz/A (0.20 lb AI/A) per year. 
• DO NOT apply broadcast over-the-top to emerged sorghum or severe crop injury can occur. 
• DO NOT harvest sorghum for forage for 30 days following application. 
• DO NOT harvest for grain or stover for 60 days following application. 
• DO NOT apply after the sorghum seedhead emerges. 
• DO NOT use in the production of forage sorghum, sudangrass, or sorghum-sudangrass hybrids. 
 
SOYBEAN 
This product can be applied pre-emergence to mesotrione-resistant soybeans. Applications to soybeans that are not designated as 
mesotrione-resistant will result in significant crop injury. 
Pre-Emergence Applications 
For pre-emergence control of the weeds listed in Table 2, apply this product prior to soybean emergence at a rate of 6.0 fl oz/A (0.19 
lb AI/A). Apply the higher rate for longer residual control. This product may be tank mixed with other registered soybean herbicides 
including S-Metolachlor and S-Metolachlor + Sodium salt of fomesafen. Refer to the tank mix partner label and follow all precautions 
and restrictions. 
If weeds are emerged at the time of application, add either a non-ionic surfactant (NIS) at 1.0 qt/100 gallons (0.25% v/v) or a crop oil 
concentrate (COC) at 1.0 gal/100 gal (1% v/v). In addition to NIS or COC, it is also advised to add either ammonium sulfate (AMS) at 
8.5 to 17.0 lb/100 gallons (or equivalent).

[Carabiner EPA Reg No 34704-1130 Page 22] 
Soybean Restrictions: 
• Apply no more than 6.0 fl oz/A (0.19 lb AI/A) per year. 
• Make no more than one pre-emergence application per year. 
• DO NOT apply more than 6.0 fl oz/A (0.19 lb AI/A) in a single application 
• DO NOT apply to emerged soybeans. 
• DO NOT graze or feed soybean forage or hay to livestock. 
 
SUGARCANE 
Apply this product by ground for pre-emergence, post-emergence over-the-top or post-emergence direct weed control in sugarcane. 
Apply this product aerially for pre-emergence and post-emergence weed control in the states of: Florida, Louisiana, and Texas. 
Pre-Emergence Applications 
Apply 6.0 to 7.7 fl oz/A (0.19 to 0.24 lb AI/A) of this product to control weeds listed in Table 2. Make application after the planting of 
plant-cane or after harvest of ratoon-cane. If weeds are emerged at the time of application, add a crop oil concentrate (COC) type 
adjuvant at 1% v/v OR a non-ionic surfactant (NIS) type adjuvant at 0.25% v/v to the spray solution. In addition to the COC or NIS, a 
spray grade UAN at a rate of 2.5% v/v OR ammonium sulfate (AMS) at a rate of 8.5 lb/100 gals. of spray solution can be added to the 
spray solution. Tank mix Atrazine or Ametryn with this product to improve weed control. Refer to the tank mix partner label for 
specific rates and use directions. 
Post-Emergence Applications 
Apply 3.0 fl oz/A (0.094 lb AI/A) of this product to control weeds listed in Table 1. Apply as a post-over-the-top or as a post- directed 
spray to the base of the sugarcane. If a pre-emergence application was made earlier in the season, only one single post-emergence 
application can be made. If no pre-emergence application was made earlier in the season, then both a post-over-the-top and a post-
directed spray application can be made. For optimum weed control, apply to actively growing weeds. 
 
Add either a crop oil concentrate (COC) adjuvant at 1% v/v OR a non-ionic surfactant (NIS) adjuvant to the spray solution. In addition 
to the COC or NIS, use a spray grade UAN (e.g., 28-0-0) at 2.5% v/v OR ammonium sulfate (AMS) at 8.5 lbs/100 gallons of spray 
solution to improve weed control. 
 
For additional post-emergence weed control, tank mix this product with atrazine, Sodium salt of asulam and/or Trifloxysulfuron-
Sodium. Refer to the tank mix product label for specific rate and use directions. 
 
Sugarcane Restrictions: 
• DO NOT apply more than 7.7 fl oz/A (0.24 lb AI/A) in a pre-emergence application. 
• DO NOT apply more than 3.0 fl oz/A (0.094 lb AI/A) in a post-emergence application. 
• DO NOT make more than 2 applications per year. If a pre-emergence application is made, only one post-emergence 
application can be made. 
• Minimum retreatment interval is 14 days. 
• DO NOT apply more than 10.7 fl oz/A (0.33 lb AI/A) per year. 
• DO NOT harvest sugarcane within 114 days following a post-over-the-top treatment (114-day PHI). 
• DO NOT harvest sugarcane with 100 days following a post-directed application (100-day PHI). 
NON-AGRICULTURAL USES 
TURFGRASS 
This product is applied pre- and post-emergence to provide selective contact and residual control of turfgrass weeds. If applied pre-
emergence, it is absorbed when emerging from the soil. Pre-emergence activity and control is reduced under dry conditions. 
Activate this product with 0.15 inches of irrigation if rain has not fallen within 10 days of application. Post-emergent control is 
obtained by absorption into the soil and contact with foliage. Growth ceases post-application, weeds turn white from chlorophyll 
loss, and will die within three weeks. Make a repeat application after 2 to 3 weeks to improve post-emergence weed control. Add a 
non-ionic surfactant when making post- emergence applications. 
Turfgrass color can temporarily become white during treatment. Whitening typically occurs 5 to 7 days post-application and lasts for 
several weeks. A second application to the same site will cause less whitening of plant tissue. 
This product controls weeds prior to and during seeding of certain turfgrasses during tur renovation (see New Seedings). If making 
pre-emergence application to established turf, tank mix this product with other pre-emergence herbicides including Evade WDG

[Carabiner EPA Reg No 34704-1130 Page 23] 
Herbicide for longer residual and broad-spectrum control. 
This product can be applied to commercial and residential turfgrasses. Non-crop area use sites include golf courses, sod farms, 
athletic fields, parks, residential and commercial properties, cemeteries, airports, and lawns. 
 
Turfgrass Use Precautions: 
Apply this product at reduced rates of 4.0 fl oz/A (0.13 lb AI/A) or less if tank mixing with atrazine, bentazon, or simazine. Before 
tank mixing this product with other herbicides, conduct a compatibility, safety, and efficacy test before treating larger areas. See 
tank mix partner labels for directions and precautions. The most restrictive directions apply. 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable 
restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive 
directions for use and precautionary statements of each product in the tank mixture. 
 
Thoroughly clean application equipment after use to avoid injury to sensitive plants. 
To avoid injury to sensitive species, keep traffic out of treated areas until sprays have dried; irrigate soil lightly to move this product 
from turf foliage before resuming normal irrigation. 
 
Turfgrass Use Restrictions: 
• DO NOT overspray or allow spray to drift to ornamentals or flower beds and gardens. Roses and daylilies are particularly 
sensitive to this product. 
• DO NOT apply more than 8.0 fl oz/A (0.125 lb AI/A) in a single application. 
• DO NOT apply more than 16.0 oz/A (0.50 lb AI/A) per year. 
• DO NOT make more than 4 applications of this product per year when using reduced application rates. 
• If multiple applications are made, they must be made no closer than 14 days apart. 
• DO NOT plant any crop other than turfgrass for 18 months post-application of this product to avoid turfgrass injury. 
• DO NOT apply organophosphate or carbamate insecticides within 7 days of applying this product. 
• DO NOT apply this product through any type of irrigation system. 
• DO NOT make aerial applications. 
• DO NOT use treated clippings to mulch trees or vegetable/flower gardens. 
• DO NOT apply this product on Bentgrass, bermudagrass, kikuyugrass, Poa annua, seashore paspalum, and zoysiagrass 
where plant injury is unacceptable. Maintain a 5-foot buffer between treated areas and bentgrass or Poa annua greens. 
• DO NOT apply over the top of exposed roots of trees and ornamentals. 
• DO NOT use on golf course putting greens; maintain a minimum of a 5-foot buffer between putting greens and treated 
areas. 
• Residential Lawns: DO NOT make broadcast applications for pre- and post-emergent weed control unless the home lawn 
is being reseeded and/or renovated as whitening of some turfgrasses may occur. 
Turfgrass Species Controlled 
Species Application Rate in Fl Oz/A (lb AI/A) 
Buffalograss (Buchloe dactyloides) 
Centipedegrass (Eremochloa ophiuroides) 
Kentucky bluegrass (Poa pertensis) 
Tall fescue (Festuca arundinacea) 
5.0 to 8.0 
(0.16 to 0.25) 
Fine fescue* (creeping red, chewings and hard) Festuca spp. 
Perennial ryegrass* (Lolium perenne) 
5.0 
(0.16) 
St. Augustinegrass* (grown for sod) (Stenotaphrum secundatum) 4.0 
(0.134) 
* See additional rate instructions below. 
 
APPLICATION INSTRUCTIONS 
Pre-Emergence Applications: 
Apply 4 to 8 fl oz (0.155 to 0.25 lb AI) of this product per acre in at least 30.0 gallons of water per acre before seeds germinate and as 
close to seed germination as possible. Combine this product with another pre-emergence herbicide including Barricade 65WG for 
extended control of crabgrass and foxtail.

[Carabiner EPA Reg No 34704-1130 Page 24] 
Pre-Emergence Application Precautions: 
This product is most effective on established turf when applied post-emergence unless it is combined with another soil active 
herbicide. 
 
Pre-Emergence Application Restrictions: 
• DO NOT exceed 5.0 fl oz (0.16 lb AI) per acre per application to perennial ryegrass, fine fescues, or mixed stands that 
consist of >50% perennial ryegrass and/or fine fescue. 
• St. Augustinegrass sod: DO NOT exceed 4.0 fl oz (0.13 lb AI) per acre. 
 
Application to New Seedings/New Lawns 
Apply 5.0 to 8.0 fl oz (0.16 to 0.25 lb AI) product per acre in at least 30.0 gallons of water per acre before seeding or after seeding of 
turfgrass species listed below, except fine fescue, as application to fine fescue can reduce grass density. This product can be 
effectively used on grass seed blends that contain <20% by weight hard/fine fescue. For optimal control, apply at grass seeding or as 
close to seeding as possible. 
 
New Seedings/New Lawns Restrictions: 
• DO NOT spray on newly germinated turfgrass. Delay treatment until grass has been mowed 2 to 4 times and/or 4 weeks 
after emergence (whichever is longer). 
 
Post-Emergence Application Instructions: 
Apply 4.0 to 8.0 fl oz of this product (0.13 to 0.25 lb AI) per acre in at least 30.0 gal of water per acre with a NIS surfactant. Make a 
repeat application 2 to 3 weeks later for optimal weed control. Apply to young, actively growing weeds. 
 
Post-Emergence Application Precautions: 
Moisture stress and application to mature weeds can reduce herbicide efficacy. 
 
Bentgrass (Agrostis spp.)/Nimbleweed (Muhlenbergia schreberi) Treatment: 
Apply 5.0 fl oz (0.16 lb AI) product per acre in at least 30.0 gallons of water per acre combined with a NIS surfactant at 2- to 3-week 
intervals for a maximum of 3 applications. For optimal weed control, apply in late summer/early fall just prior to new growth. 
 
St. Augustinegrass (Sod uses only) and Centipedegrass Treatment: 
Apply to established turf ONLY. 
 
St. Augustinegrass (Sod uses only) and Centipedegrass Restrictions: 
• DO NOT exceed 4.0 fl oz (0.13 lb AI) product per application if tank mixing with Atrazine or Simazine. 
• DO NOT exceed 0.5 lb atrazine or simazine active ingredient. See atrazine/simazine labels for precautions and restrictions. 
Dormant Bermudagrass Application only: 
Apply 5.0 fl oz (0.16 lb AI) per acre of this product to control winter weeds listed in the Weeds Controlled table below. Make a 
repeat application 2 to 3 weeks later. Application of this product to semi-dormant turf will cause bermudagrass whitening. 
Spot Applications of this product 
Spray Mix Application Rate Rate of this product Rate of NIS adjuvant 
2.0 gal 1.0 gal/1,000 sq ft 1.0 tsp 3.0 tsp 
 
Spot Application Restrictions: 
• DO NOT apply more than 16.0 oz (0.50 lb AI) of this product per acre per year. 
 
WEEDS CONTROLLED USING PRE-EMERGENCE APPLICATION 
Apply this product with a grass pre-emergence herbicide including Barricade 65WG Herbicide, except when used to control weeds in 
new seedings. This product will control the following weeds using pre-emergence application: 
Common Name Scientific Name 
Barnyardgrass Echinochloa crusgalli 
Bentgrass (Creeping) Agrostis stolonifera 
Bluegrass (Annual)* Poa annua* 
Buckhorn Plantain Plantago Ianceloata 
Carpetweed Mollugo verticillata

[Carabiner EPA Reg No 34704-1130 Page 25] 
Chickweed (Common) Stellaria media 
Chickweed (Mouseear) Cerastium vulgatum 
Clover (Large Hop) Trifolium aureum 
Clover (White) Trifolium repens 
Crabgrass (Large) Digitaria sanguinalis 
Crabgrass (Smooth) Digitaria ischaemum 
Crabgrass (Southern) Digitaria ciliaris 
Foxtail (Yellow) Setaria glauca 
Galinsoga Galinsoga ciliate 
Lambsquarters Chenopodium album 
Pigweed (Redroot) Amaranthus retroflexus 
Pigweed (Smooth) Amaranthus hybridus 
Purslane (Common) Portulaca oleracea 
Shepherd’s purse Capsella bursa-pastoris 
Smartweed (Pale) Polygonum lapathifolium 
Smartweed (Pennsylvania) Polygonum pensylvanicum 
Speedwell (Persian) Veronica persica 
Speedwell (Purslane) Veronica peregrine 
Wild Carrot Daucus carota 
*Suppression only. 
 
WEEDS CONTROLLED USING POST-EMERGENCE APPLICATION 
Make a second application of this product 2 to 3 weeks after initial treatment. For optimal control add a NIS-type surfactant and 
apply to young, actively growing weeds. This product will control the following weeds using post-emergence application: 
Common Name Scientific Name 
Barnyardgrass Echinochloa crusgalli 
Bentgrass (Creeping) Agrostis stolonifera 
Buckhorn Plantain Plantago Ianceloata 
Carpetweed Mollugo verticillata 
Chickweed (Common) Stellaria media 
Chickweed (Mouseear) Cerastium vulgatum 
Clover (Large Hop) Trifolium aureum 
Clover (White) Trifolium repens 
Crabgrass (Large)* Digitaria sanguinalis* 
Crabgrass (Smooth)* Digitaria ischaemum* 
Crabgrass (Southern)* Digitaria ciliaris* 
Curly dock Rumex crispus 
Dandelion (Catsear) Hypochoeris radicata 
Dandelion (Common) Taraxacum officinale 
Florida Betony Stachys floridana 
Florida Pusley Richardia scabra 
Foxtail (Yellow) Setaria glauca 
Galinsoga Galinsoga ciliate 
Goosegrass* Eleusine indica* 
Ground Ivy Glechoma hederacea 
Healall Prunella vulgaris 
Henbit Lamium amplexicaule 
Lambsquarters (Common) Chenopodium album 
Lawn Burweed Soliva sessilis 
Lovegrass (Tufted) Eragrostis pectinacea 
Marestail Conyza Canadensis 
Nimblewill Muhlenbergia schreberi 
Nutsedge (Yellow) Cyperus esculentus 
Oxalis Oxalis stricta 
Pigweed (Redroot) Amaranthus retroflexus 
Pigweed (Smooth) Amaranthus hybridus

[Carabiner EPA Reg No 34704-1130 Page 26] 
Purslane (Common) Portulaca oleracea 
Shepherd’s Purse Capsella bursa-pastoris 
Smartweed (Pale) Polygonum lapathifolium 
Smartweed (Pennsylvania) Polygonum pensylvanicum 
Sowthistle Sonchus oleraceus 
Swinecress Coronopus didymus 
Thistle (Canada) Cirsium arvense 
Verbena Verbena hastate 
Wild Carrot Daucus carota 
Wild Violet Viola pratincola 
Windmillgrass Chloris verticillata 
*For optimal control, apply to less than 4 tiller crabgrass and goosegrass. 
 
STORAGE AND DISPOSAL 
Do not contaminate other pesticides, fertilizers, water, food, or feed by storage or disposal. 
PESTICIDE STORAGE: Do not store below 10 °F, (- 12 °C). Do not use or store near heat, open flame or hot surfaces. Keep out of 
reach of children and animals. Store in original containers only. Store in a cool dry place and avoid excess heat. 
Carefully open containers. After partial use replace lids and close tightly. Do not put concentrate or dilute material into food or 
drink containers. In case of spill, avoid contact, isolate area and keep out animals and unprotected persons. Confine spills. 
To confine spill: If liquid, dike surrounding area or absorb with sand, cat litter or commercial clay. If dry material, cover to prevent 
dispersal. Place damaged package in a holding container. Identify contents. 
PESTICIDE DISPOSAL: Pesticide wastes are toxic. Improper disposal of excess pesticide, spray mixture, or rinsate is a violation of 
Federal law. If these wastes cannot be disposed of by use according to label instructions, contact your State Pesticide or 
Environmental Control Agency, or the Hazardous Waste representative of the nearest EPA Regional Office for guidance. 
CONTAINER HANDLING: Nonrefillable container. Do not reuse this container to hold materials other than pesticides or dilute 
pesticides (rinsate). After emptying and cleaning, it may be allowable to temporarily hold rinsate or other pesticide -related 
materials in the container. Contact your state regulatory agency to determine allowable practices in your state. Once cleaned, some 
agricultural plastic pesticide containers can be taken to a container collection site or picked up for recycling. To find the nearest 
site, contact your chemical dealer or manufacturer, or contact The Agricultural Container Recycling Council (ACRC) at 
www.agcrecyclinge.org. If not recycled, then puncture and dispose of in a sanitary landfill, or incineration, or if allowed by state 
and local authorities, by burning. If burned, stay out of smoke. Triple rinse or pressure rinse container (or equivalent) pro mptly 
after emptying. 
[For packages up to 5 gallons: Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and 
drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour 
rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the f low 
begins to drip. Repeat this procedure two more times. Pressure rinse as follows: Empty the remaining contents into application 
equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over 
application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the 
container, and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins to drip.] 
[For packages greater than 5 gallons and less than 56 gallons: Triple rinse as follows: Empty the remaining contents into 
application equipment or a mix tank. Fill the container ¼ full with water. Replace and tighten closures. Tip container on its side and 
roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and 
forth several times. Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into 
application equipment or a mix tank or store rinsate for later use or disposal. Repeat this procedure two more times. Pressure 
rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds 
after the flow begins to drip. Hold container upside down over application equipment or mix tank or collect rinsate for later use or 
disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 PSI for at least 30 seconds. Drain for 10 
seconds after the flow begins to drip.] 
[For packages greater than 56 gallons: To clean the container before final disposal, empty the remaining contents from this 
container into application equipment or mix tank. Fill the container about 10 percent full with water. Agitate vigorously or 
recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection system. 
Repeat this rinsing procedure two more times.] 
[For refillable containers: Refill this container with pesticide only. Do not reuse this container for any other purpose. Cleaning the 
container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the 
responsibility of the refiller. To clean the container before final disposal, empty the remaining contents from this containe r into 
application equipment or mix tank. Fill the container about 10 percent full with water. Agitate vigorously or recirculate water with

[Carabiner EPA Reg No 34704-1130 Page 27] 
the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing 
procedure two more times. Offer for recycling or reconditioning, if available, or puncture and dispose of in a sanitary landfill, or by 
other procedures approved by state and local authorities.] 
[Container Disposal – Returnable/Refillable Sealed Container: Do not rinse container. Do not break seals. Replace the dust 
cover/cap and return container, intact to point of purchase.] 
For help with any spill, leak, fire or exposure involving this material, call day or night CHEMTREC – 1-800-424-9300. 
 
CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY 
BEFORE BUYING OR USING THIS PRODUCT, read the entire Directions for Use and the following Conditions of Sale and Limitation of 
Warranty and Liability. By buying or using this product, the buyer or user accepts the following Conditions of Sale and Limitation of 
Warranty and Liability, which no employee or agent of LOVELAND PRODUCTS, INC. or the seller is authorized to vary in any way. 
 
Follow the Directions for Use of this product carefully. It is impossible to eliminate all risks inherently associated with the use of this 
product. Crop or other plant injury, ineffectiveness, or other unintended consequences may result from such risks as weather or 
crop conditions, mixture with other chemicals not specifically identified in this product’s label, or use of this product contrary to the 
label instructions, all of which are beyond the control of LOVELAND PRODUCTS, INC. and the seller. The buyer or user of this product 
assumes all such inherent risks. 
Subject to the foregoing inherent risks, LOVELAND PRODUCTS, INC. warrants that this product conforms to the chemical description 
on the label and is reasonably fit for the purposes stated in the Directions for Use when the product is used in strict accordance with 
such Directions for Use under normal conditions of use. EXCEPT AS WARRANTED IN THIS LABEL AND TO THE EXTENT CONSISTENT 
WITH APPLICABLE LAW, THIS PRODUCT IS SOLD “AS IS,” AND LOVELAND PRODUCTS, INC. MAKES NO OTHER WARRANTY, EXPRESS 
OR IMPLIED, INCLUDING BUT NOT LIMITED TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ELIGIBILITY OF THIS 
PRODUCT FOR ANY PARTICULAR TRADE USAGE. 
 
IN THE UNLIKELY EVENT THAT BUYER OR USER BELIEVES THAT LOVELAND PRODUCTS, INC. HAS BREACHED A WARRANTY 
CONTAINED IN THIS LABEL AND TO THE EXTENT REQUIRED BY APPLICABLE LAW, BUYER OR USER MUST SEND WRITTEN NOTICE OF 
ITS CLAIM TO THE FOLLOWING ADDRESS: LOVELAND PRODUCTS, INC., ATTENTION: LAW DEPARTMENT, P.O. BOX 1286, GREELEY, CO 
80632-1286. 
 
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE BUYER’S OR USER’S EXCLUSIVE REMEDY FOR ANY INJURY, LOSS, OR 
DAMAGE RESULTING FROM THE HANDLING OR USE OF THIS PRODUCT, INCLUDING BUT NOT LIMITED TO CLAIMS OF BREACH OF 
WARRANTY OR CONTRACT, NEGLIGENCE, STRICT LIABILITY, OR OTHER TORTS, SHALL BE LIMITED TO ONE OF THE FOLLOWING, AT 
THE ELECTION OF LOVELAND PRODUCTS, INC. OR THE SELLER: DIRECT DAMAGES NOT EXCEEDING THE PURCHASE PRICE OF THE 
PRODUCT OR REPLACEMENT OF THE PRODUCT. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, LOVELAND PRODUCTS, INC. 
AND THE SELLER SHALL NOT BE LIABLE TO THE BUYER OR USER OF THIS PRODUCT FOR ANY CONSEQUENTIAL, SPECIAL, OR INDIRECT 
DAMAGES, OR DAMAGES IN THE NATURE OF A PENALTY. 
 
Agrisure GT is a registered trademark of Syngenta. 
Alion and Roundup Ready are registered trademarks of Bayer. 
Clearfield and LibertyLink are registered trademarks of BASF. 
Forfeit, Mad Dog and Stealth are registered trademarks of Loveland Products, Inc. 
GoalTender is a registered trademark of Corteva Agriscience. 
Hyvar and Krovar are registered trademarks of American Vanguard Corporation. 
Solicam is a registered trademark of Tessenderlo Kerley, Inc. 
Surflan is a registered trademark of United Phosphorus, Inc. 
Tetris is a registered trademark of Atticus, LLC.

[Carabiner EPA Reg No 34704-1130 Page 28] 
[Option Marketing Claims, Logos and Graphics] 
{Note to Reviewer: These logos and graphics or their respective components may be used throughout this label. The optional claims 
next to the logo are [HERBICIDE] [CROP PROTECTION]. The logo may be used by with one or more of the optional claims, or it may 
be used by itself.} 
[ ] [ ] 
 
{Note to Reviewer: the Loveland Logo may be used throughout the label.} 
 
[ ] [ ] 
{END Language inside booklet}

[Carabiner EPA Reg No 34704-1130 Page 29] 
 
{BEGIN language affixed to container} 
 
MESOTRIONE GROUP 27 HERBICIDE 
Carabiner 
ACTIVE INGREDIENT: By Wt. 
Mesotrione: 2-[4-(methylsulfonyl)-2-nitrobenzoyl]- 
1,3-cyclohexanedione .................................................. 40.0% 
OTHER INGREDIENTS** ............................................... 60.0% 
TOTAL .......................................................................... 100.0% 
Contains 4.0 pounds mesotrione per gallon. 
KEEP OUT OF REACH OF CHILDREN 
CAUTION 
Si usted no entiende la etiqueta, busque a alguien para que 
se la explique a usted en detalle. 
(If you do not understand the label find someone to explain it 
to you in detail.) 
See inside label booklet for additional Precautionary 
Statements and Directions for Use 
FIRST AID 
IF ON 
SKIN: 
• Take off contaminated clothing. 
• Rinse skin immediately with plenty of 
water for 15 to 20 minutes. 
• Call a poison control center or doctor for 
treatment advice. 
HOT LINE NUMBER 
Have the product container or label with you when 
calling a poison control center or doctor, or going for 
treatment. For emergency medical assistance, call 1-866-
944-8565. For chemical emergency: spill, leak, fire, 
exposure or accident, call CHEMTREC: 1-800-424-9300. 
PRECAUTIONARY STATEMENTS 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
CAUTION 
Harmful if absorbed through skin. Prolonged or frequently 
repeated skin contact may cause allergic reactions in some 
individuals. Avoid contact with skin, eyes, or clothing. 
ENVIRONMENTAL HAZARDS: 
Do not apply directly to water or to areas where surface 
water is present, or to intertidal areas below the mean high-
water mark. Do not contaminate water when disposing of 
equipment wash water or rinsate. 
Surface Water Advisory 
This product may contaminate water through drift or spray in 
wind. This product has a high potential for runoff for several 
weeks after application. Poorly draining soils and soils with 
shallow water tables are more prone to produce runoff that 
contains this product. A level, well maintained vegetative 
buffer strip between areas to which this product is applied 
and surface water features such as ponds, streams, and 
springs will reduce the potential for contamination of water 
from runoff. Runoff of this product will be reduced by 
avoiding applications when rainfall is forecasted to occur 
within 48 hours. Sound erosion control practices will reduce 
this product’s contribution to surface water contamination. 
 
STORAGE AND DISPOSAL 
Do not contaminate other pesticides, fertilizers, water, food, or 
feed by storage or disposal. 
PESTICIDE STORAGE: Do not store below 10 °F, (- 12 °C). Do not 
use or store near heat, open flame or hot surfaces. Keep out of 
reach of children and animals. Store in original containers only. 
Store in a cool dry place and avoid excess heat. 
Carefully open containers. After partial use replace lids and close 
tightly. Do not put concentrate or dilute material into food or 
drink containers. In case of spill, avoid contact, isolate area and 
keep out animals and unprotected persons. Confine spills. 
To confine spill: If liquid, dike surrounding area or absorb with 
sand, cat litter or commercial clay. If dry material, cover to 
prevent dispersal. Place damaged package in a holding container. 
Identify contents. 
PESTICIDE DISPOSAL: Pesticide wastes are toxic. Improper disposal 
of excess pesticide, spray mixture, or rinsate is a violation of 
Federal law. If these wastes cannot be disposed of by use 
according to label instructions, contact your State Pesticide or 
Environmental Control Agency, or the Hazardous Waste 
representative of the nearest EPA Regional Office for guidance. 
CONTAINER HANDLING: Nonrefillable container. Do not reuse 
this container to hold materials other than pesticides or dilute 
pesticides (rinsate). After emptying and cleaning, it may be 
allowable to temporarily hold rinsate or other pesticide-related 
materials in the container. Contact your state regulatory agency 
to determine allowable practices in your state. Once cleaned, 
some agricultural plastic pesticide containers can be taken to a 
container collection site or picked up for recycling. To find the 
nearest site, contact your chemical dealer or manufacturer, or 
contact The Agricultural Container Recycling Council (ACRC) at 
www.acrecycle.org. If not recycled, then puncture and dispose of 
in a sanitary landfill, or incineration, or if allowed by state and 
local authorities, by burning. If burned, stay out of smoke. Triple 
rinse or pressure rinse container (or equivalent) promptly after 
emptying. 
[For packages up to 5 gallons: Triple rinse as follows: Empty the 
remaining contents into application equipment or a mix tank and 
drain for 10 seconds after the flow begins to drip. Fill the 
container 1/4 full with water and recap. Shake for 10 seconds. 
Pour rinsate into application equipment or a mix tank or store 
rinsate for later use or disposal. Drain for 10 seconds after the 
flow begins to drip. Repeat this procedure two more times. 
Pressure rinse as follows: Empty the remaining contents into 
application equipment or a mix tank and continue to drain for 10 
seconds after the flow begins to drip. Hold container upside down 
over application equipment or mix tank or collect rinsate for later 
use or disposal. Insert pressure rinsing nozzle in the side of the 
container, and rinse at about 40 PSI for at least 30 seconds. Drain 
for 10 seconds after the flow begins to drip.] 
[For packages greater than 5 gallons and less than 56 gallons: 
Triple rinse as follows: Empty the remaining contents into 
application equipment or a mix tank. Fill the container ¼ full with 
water. Replace and tighten closures. Tip container on its side and 
roll it back and forth, ensuring at least one complete revolution, 
for 30 seconds. Stand the container on its end and tip it back and 
forth several times. Turn the container over onto its other end

[Carabiner EPA Reg No 34704-1130 Page 30] 
 
and tip it back and forth several times. Empty the rinsate into 
application equipment or a mix tank or store rinsate for later use 
or disposal. Repeat this procedure two more times. Pressure rinse 
as follows: Empty the remaining contents into application 
equipment or a mix tank and continue to drain for 10 seconds 
after the flow begins to drip. Hold container upside down over 
application equipment or mix tank or collect rinsate for later use 
or disposal. Insert pressure rinsing nozzle in the side of the 
container, and rinse at about 40 PSI for at least 30 seconds. Drain 
for 10 seconds after the flow begins to drip.] 
[For packages greater than 56 gallons: To clean the container 
before final disposal, empty the remaining contents from this 
container into application equipment or mix tank. Fill the 
container about 10 percent full with water. Agitate vigorously or 
recirculate water with the pump for 2 minutes. Pour or pump 
rinsate into application equipment or rinsate collection system. 
Repeat this rinsing procedure two more times.] 
[For refillable containers: Refill this container with pesticide only. 
Do not reuse this container for any other purpose. Cleaning the 
container before final disposal is the responsibility of the person 
disposing of the container. 
Cleaning before refilling is the responsibility of the refiller. To 
clean the container before final disposal, empty the remaining 
contents from this container into application equipment or mix 
tank. Fill the container about 10 percent full with water. Agitate 
vigorously or recirculate water with the pump for 2 minutes. Pour 
or pump rinsate into application equipment or rinsate collection 
system. Repeat this rinsing procedure two more times. Offer for 
recycling or reconditioning, if available, or puncture and dispose 
of in a sanitary landfill, or by other procedures approved by state 
and local authorities.] 
[Container Disposal – Returnable/Refillable Sealed Container: Do 
not rinse container. Do not break seals. Replace the dust 
cover/cap and return container, intact to point of purchase.] 
For help with any spill, leak, fire or exposure involving this 
material, call day or night CHEMTREC – 1-800-424-9300. 
EPA Reg. No.: 34704-xxxx 
EPA Est. No.: [nnnn-xx-nnn] 
Net Contents: [yyyyyy] 
[Print code] [EPA MASTER LABEL—Label ID 06/19] 
Formulated for 
Loveland Products Inc., 
P.O. Box 1286, Greeley, CO 80632-1286 
{END language affixed to container}