crop-chem-docs/corpus/epa_ppls/34704-790.md

# TRIFLURALIN 10G

- EPA Reg No: **34704-790**
- Registrant: LOVELAND PRODUCTS, INC.
- Signal word: Caution
- Active ingredients: Trifluralin (10%)
- Label accepted: 2026-06-24
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/034704-00790-20260624.pdf

---
June 24, 2026 
 
Chris Mason, Ph.D. 
Senior Manager of Registrations 
Loveland Products Inc. 
P.O Box 1286 
Greeley, CO 80632-1286 
 
Subject: Label Amendment - Registration Review Mitigation for Trifluralin 
 Product Name: Trifluralin 10G 
 EPA Registration Number: 34704-790 
Case Number: 472503 
Application Dates: March 31, 2020 
 
Dear Chris Mason: 
 
The Agency, in accordance with the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), 
as amended, has completed reviewing all the information submitted with your application to 
support the Registration Review of the above referenced product in connection with the 
Trifluralin Interim Decision, and has concluded that your submission is acceptable. The label 
referred to above, submitted in connection with registration under FIFRA, as amended, is 
acceptable. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please 
be aware that the website becomes labeling under the Federal Insecticide, Fungicide, and 
Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the 
product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 
40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In 
addition, regardless of whether a website is referenced on your product’s label, claims made on 
the website may not substantially differ from those claims approved through the registration 
process. Therefore, should the Agency find or if it is brought to our attention that a website 
contains false or misleading statements or claims substantially differing from the EPA approved 
registration, the website will be referred to the EPA’s Office of Enforcement and Compliance 
Assurance. 
 
A stamped copy of your labeling is enclosed for your records. This labeling supersedes 
all previously accepted labeling and must be used at your next label printing. You must 
submit one copy of the final printed labeling before you release the product for

Page 2 of 2 
EPA Reg. No. 34704-790 
Case No. 472503 
 
shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may 
distribute or sell this product under the previously approved labeling for 12 months 
from the date of this letter. After 12 months, you may only distribute or sell this 
product if it bears this new revised labeling or subsequently approved labeling. “To 
distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation 
at 40 CFR 152.3. 
 
If you have any questions about this letter, please contact Nick Barnett by phone at 513-569-
7643, or via email at Barnett.nicholas@epa.gov . 
 
 S i n c e r e l y , 
 
 
Julie Javier, Team Leader 
Risk Mitigation and Implementation Branch 4 
Pesticide Re-Evaluation Division 
Office of Pesticide Programs 
 
ENCLOSURE: Stamped label

1
TRIFLURALIN 10G
A Selective Herbicide for the Preemergence control of Annual Grasses and Broadleaf Weeds
ACTIVE INGREDIENT:
Trifluralin (a,a,a-trifluoro-2,6-dinitro-N,N-dipropyl-p-toluidine) ................................10.0%
OTHER INGREDIENTS*: ................................................................................................90.0%
TOTAL 100.0%
Contain 5 pounds active ingredient per 50 lb bag.
KEEP OUT OF REACH OF CHILDREN
CAUTION
FIRST AID
If in eyes: • Hold eye open and rinse slowly and gently with water for 15 –20 minutes.
• Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye.
• Call a poison control center or doctor for treatment advice.
If swallowed: • Call a poison control center or doctor immediately for treatment advice.
• Have a person sip a glass of water if able to swallow.
• Do not induce vomiting unless told to do so by the poison control center or doctor.
• Do not give anything by mouth to an unconscious person.
If Inhaled: • Move person to fresh air.
• If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably by 
mouth-to-mouth, if possible.
• Call a poison control center or doctor for further treatment advice.
If on skin or 
clothing:
• Take off contaminated clothing.
• Rinse skin immediately with plenty of water for 15-20 minutes.
• Call a poison control center or doctor for treatment advice.
FOR A MEDICAL EMERGENCY INVOLVING THIS PRODUCT CALL: 1-866-944-8565.
Have the product container or label with you when calling a poison control center or doctor, or going for treatment.
For Additional Precautionary Statements, Complete First Aid, Directions for Use, Storage and Disposal and 
Other Use Information See Inside This Label Booklet.
EPA REG. NO. 34704-790
EPA EST. NO.
NET WEIGHT POUNDS
Trifluralin GROUP 3 HERBICIDE
Jun 24, 2026
34704-790

2
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION
Causes eye irritation. Harmful if swallowed, inhaled or absorbed through the skin.
Avoid breathing dust and contact with skin, eyes or clothing. This product may cause skin sensitization reactions in 
some people.
Personal Protective Equipment:
Applicators and other handlers must wear: 
x Long-sleeved shirt and long pants,
x Chemical-resistant gloves, PDGHRIbarrier laminate, butyl rubber > 14 mls, nitrile rubber > 14 mls, or viton > 14
mls,
x Shoes plus socks.
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washable, use detergent
and hot water. Keep and wash PPE separately from other laundry.
Engineering Controls Statements:
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the 
Worker Protection Standard (WPS) for agricultural pesticides  &)5  G H DQG Ithe
handler PPE requirements may be reduced or modified as specified in the WPS.
ENVIRONMENTAL HAZARDS
This pesticide is extremely toxic to freshwater marine, and estuarine fish and aquatic invertebrates including shrimp 
and oyster. Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the 
mean high water mark. Do not apply in a manner which will directly expose canals, lakes, streams, ponds, marshes 
or estuaries to aerial drift. Do not contaminate water when disposing of equipment washwaters.
Non-target organism advisory statement: This product is toxic to plants and may adversely impact the
forage and habitat of non-target organisms, including pollinators, in areas adjacent to the treated site. Protect
the forage and habitat of non-target organisms by following label directions intended to minimize drift
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only
protected handlers may be in the area during application. For any requirements specific to your state or tribe, consult
the agency responsible for pesticide regulation.
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This 
Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, 
and handlers of agricultural pesticides. It contains requirement for training, decontamination, notification, and emergency 
assistance. It also contains specific instructions and exceptions pertaining to the statement on this label about personal 
protective equipment (PPE), and restricted-entry interval. The requirements in this box only apply to uses of this product 
that are covered by the Worker Protection Standard. Do not enter or allow worker entry into treated areas during the 
restricted entry interval (REI) of 12 hours. Exception: if the product is soil-injected or soil incorporated, the Worker 
Protection Standard, under certain circumstances , allows worker to enter the treated area if there will be no contact with 
anything that has been treated. PPE required for early entry to treated areas that is permitted under the Worker 
Protection Standard and that involves contact with anything that has been treated, such as plants, soils, or water, is: 
x coveralls,
x chemical-resistant gloves, PDGHRIbarrier laminate, butyl rubber > 14 mls, nitrile rubber > 14 mls, or viton >14 
mls,
x shoes plus socks.
USER SAFETY RECOMMENDATIONS
Users should:
Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet.
Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as 
possible, wash thoroughly and change into clean clothing.

3
WEED RESISTANCE MANAGEMENT
MODE OF ACTION (MOA) 
Strut herbicide contains the active ingredients trifluralin. Trifluralin is a preemergent herbicide (Group  mode of action). 
Trifluralin’s main mechanism of action is the inhibition of cell mitosis. This herbicide typically acts on the meristems and 
tissues of underground organs, such as roots, epicotyls, hypocotyls, plumules, rhizomes, bulbs and seeds
Contact your local extension agent, crop advisor, or sales representative to find out if suspected resistant weeds to this 
MOA has been found in your region. If resistant biotypes of target weeds have been reported, use the application rates 
of this product specified for your local conditions. Tank mix products so that there are multiple effective mechanisms of 
actions for each target weed. use the less resistance-prone partner at a rate that will control the target weed(s) equally 
as well as the more resistance-prone partner.
A given weed population may contain or develop resistance to an herbicide or herbicide MOA after repeated use.
Appropriate resistance-management strategies should be followed to mitigate or delay resistance. If levels of control
provided by applications of this product is reduced and cannot be accounted for by factors such as misapplication,
abnormal levels of target species or extremes of weather, it may be the case that target species have developed a strain 
resistant to applications of this product.
Suspected herbicide-resistant weeds may be identified by these indicators:
x Failure to control a weed species normally controlled by the herbicide at the dose applied, especially if control is
achieved on adjacent weeds;
x A spreading patch of non-controlled plants of a particular weed species; and
x Surviving plants mixed with controlled individuals of the same species.
If resistance develops, this product may not provide sufficient control of target species. Where you suspect target 
species are developing resistance, contact State/local agricultural advisors. If a weed pest population continues to 
progress after treatment with this product, discontinue use of this product, and switch to another management strategy 
or herbicide with a different mode of action, if available, or by a mechanical method such as hoeing or tillage. 
Integrated weed management guidelines promote an economically viable, environmentally sustainable, and socially 
acceptable weed control program regardless of the herbicide(s) used. The highlights of successful integrated weed 
management include:
1. Correctly identify weeds and look for trouble areas within field to identify resistance indicators.
2. Rotate crops.
3. Start the growing season with clean fields.
4. Rotate herbicide modes of action by using multiple modes of action during the growing season and apply no
more than 2 applications of a single herbicide mode of action to the same field in a 2-year period. One method
to accomplish this is to rotate herbicide tolerant trait systems.
5. Apply listed rates of herbicides to actively growing weeds at the correct time with the right application
techniques.
6. Control any weeds that may have escaped the herbicide application.
7. Thoroughly clean field equipment between fields.
8. Scout before and after application to monitor weed populations for early signs of resistance development.
9. Adopt an integrated weed-management program for herbicide use that includes scouting and uses historical
information related to herbicide use and crop rotation, and that considers tillage ( or other mechanical control
methods), cultural ( e.g., higher crop seeding rates; precision fertilizer application method and timing to favor the
crop and not the weeds), biological (weed-competitive crops or varieties) and other management practices.
Contact your local agronomic advisor for more specific information on integrated weed management for your area. 
Users should report lack of performance to registrant or their representative. For mixtures including this herbicide note 
that each listed weed may not be controlled by multiple mechanisms of action. Refer to crop specific directions (below) 
for maximum application rates and number of applications.
WEEDS AND GRASSES CONTROLLED BY TRIFLURALIN 10G
Grasses
Annual bluegrass Poa annua
Barnyardgrass Echinochloa sp.
(Watergrass)
Bromegrass Bromus tectorum

4
(Cheatgrass) 
(Downy brome)
Crabgrass Digitaria spp.
(Large crabgrass) 
(Smooth crabgrass)
Foxtail Setaria spp.
(Bristlegrass) 
(Giant foxtail) 
(Green foxtail) 
(Foxtail millet) 
(Pigeongrass) 
(Robust foxtail) 
(Yellow foxtail)
Johnsongrass (from seed) Sorghum halepense
Junglerice Echinochloa colonum
Ryegrass, annual Lolioum multiflorum
Sandbur Cenchrus incertus
(Burgrass)
Signalgrass, broadleaf Brachiaria platyphylla
(brachiaria)
Sprangletop Leptochloa filiformis
Stinkgrass Eragrostis cilianensis
(Lovegrass)
Shattercane Sorghum bicolor
(Wild cane)
Oat, wild* Avena fatua
Wooly cupgrass Eriochloa villosa
Broadleaf Weeds
Carpetweed Mollugo verticillata
Chickweed, common Stellaria media
Goosefoot Chenopodium hybridum
Henbit Lamium amplexicaule
Knotweed Polygonum aviculare
Lambsquarters, common Chenopodium album
Pigweed Amaranthus spp.
(Carelessweed) 
(Prostrate pigweed) 
(Redroot pigweed) 
(Rough pigweed) 
(Spiny pigweed)
Puncturevine (Western U.S. only) Tribulus terrestris
(Caltrop) 
(Goathead)
Purslane, common Portulaca oleracea
Pusley, Florida Richardia scabara
(Florida purslane) (Mexican clover) (pusley)
Stinging nettle Urtica dioica
(Nettle)
*When applied as a preplant incorporated (PPI) treatment, Trifluralin 10G will provide partial control of wild oats. This
claim is for all PPI uses except for fall application for spring seeded cereals at foxtail (pigeongrass) control rates.

5
GENERAL PRECAUTIONS
Applied according to directions and under normal growing conditions, Trifluralin 10G will not harm the treated crop. 
Over-applications may result in crop injury or rotational crop damage from soil residue. Uneven application or
improper incorporation can result in erratic weed control or crop injury. Seedling disease, cold weather, deep planting,
excessive moisture, high salt concentration or drought may weaken crop seedlings and increase the possibility of 
damage. Under these conditions, delayed crop development or reduced yields may result. Avoid applying Trifluralin 
10G to soils that are wet or are subject to prolonged periods of flooding as poor weed control may result.
Do not use this product on any crop grown in Pecos county or Reeves county, Texas or Montana.
In Arizona, California, Colorado, Idaho, Nevada, New Mexico, Oregon, Utah, Washington and Wyoming: To 
avoid crop injury, do not plant sugarbeets, redbeets, spinach, proso millet, corn, sorghum (milo), oats, and annual or 
perennial grass crops or grass mixtures for 12 months after a spring application or 14 months after a fall application of 
Trifluralin 10G. If land has not been irrigated, these crops should not be planted for 18 months after a spring application 
or 20 months after a fall application. The possibility of injury to these crops can be reduced with mold board plowing to 
a depth of 12 inches before planting.
All Other Areas: Sugarbeets, redbeets, and spinach should not be planted for 12 months after a spring application or 
14 months after a fall application. Moldboard plow to a depth of 12 inches before planing sugarbeets to reduce the 
possibility of crop injury.
In Minnesota, North Dakota and South Dakota: Proso millet, sorghum (milo), oats and annual or perennials grass 
crops or grass mixtures should not be planted for 18 months after a spring application or 21 months after a fall 
application of Trifluralin 10G.
In Portions of Kansas, Nebraska, Oklahoma, and Texas receiving less than 20 inches of rainfall and irrigation: 
Do not plant proso millet, sorghum (milo), oats and annual or perennial grass crops or grass mixtures for 18 months 
after an application of Trifluralin 10G. The possibility of crop injury may increase in sorghum with cool wet weather 
conditions during early growth stages. Crops should not be planted for 12 months after a spring application or 14
months after a fall application of Trifluralin 10G in areas receiving more than 20 inches of rainfall or irrigation.
VEGETABLE CROPS
Vegetable crops other than those listed on this label for use with preplant soil incorporated application of Trifluralin 
10G should not be planted within 5 months after an application of Trifluralin 10G.
APPLICATION DIRECTIONS
Application
Apply Trifluralin 10G with ground or aerial broadcast applicator properly calibrated to apply the granules uniformly. 
Apply at the recommended rate for soil texture to be treated. Follow calibration directions provided by the equipment 
manufacture. Avoid concentration of material in narrow bands.
Freezing will not adversely affect this product. If product is frozen at time of application, agitate or thaw to restore 
free- flowing granules.
Soil Preparation
Trifluralin 10G may be applied to standing stubble or soil that has been pretilled. The soil surface should be smooth 
enough to allow for uniform application and efficient incorporation. Existing weeds and crop residues should be 
reduced to a manageable level using tillage so that this product can be uniformly incorporated into the top 2 or 3 
inches of the final seed bed. Soil surface conditions and soil moisture should be sufficient to allow breakup of large 
clods and uniform mixing of Trifluralin 10G into the top 2 or 3 inches of soil. If this is not possible the soil should be 
tilled prior to application. Soil compaction and/or nonuniform incorporation may occur where soil is excessively moist.
Soil Texture
Trifluralin 10G rate recommendations for incorporated treatments are based on soil texture and organic matter 
content. A fine texture soil will require a higher application rate than a coarse textured soil. Choose the proper rate for 
each application based on the soil texture. Refer to the table below to determine your soil texture.
Soil Texture Soil Content
Coarse (Light) Soils Sand, loamy sand, sandy loam
Medium Soils Loam, silty clay loam*, silt loam, silt,
sandy clay loam*

6
Fine (Heavy) Soils Clay, clay loam, silty clay loam*,
silty clay, sandy clay, sandy clay 
loam*
*Silty clay loam and sandy clay loam soils are transitional soils that may be classified as either medium or fine 
textured soils. If silty clay loam or sandy clay loam soils are predominantly sand or silt, they are usually classified as 
medium textured soils. If they are predominantly clay, they are usually classified as fine textured soils.
Drift Advisory
Avoiding drift at the application site is the responsibility of the applicator. The interaction of many equipment and
weather-related factors determines the potential for drift. The applicator and the grower are responsible for considering
all these factors when making decisions.
This pesticide should only be applied when the potential for drift to adjacent sensitive areas (e.g. residential areas, 
bodies of water, known habitat for threatened or endangered species, non-target crops) is minimal (e.g. when wind is 
blowing away from the sensitive areas).
APPLICATION TIMING
Spring Application
Apply Trifluralin 10G any time after January 1 when soil can be worked and is suitable condition for good 
incorporation. See Approved Crops section for recommendations on specific crops.
Fall Application
In California, Minnesota, North Dakota and South Dakota, apply Trifluralin 10G any time between September 1 and
December 31. In all other states, fall apply anytime between October 15 and December 31. Refer to the Approved 
Crops section of this label for specific rate recommendations. Increased rates for fall application are recommended for 
certain crops growing in certain geographic areas. For crops for which there are no specific fall application 
instructions, and for which Trifluralin 10G is recommend as a preplant incorporated treatment, use other rates listed 
for spring applications. In areas receiving greater than 20” total average annual rainfall and irrigation, use the higher 
rate in the recommend rate range. Do not fall apply Trifluralin 10G prior to planting sugar beets, potatoes and direct 
seeded tomatoes the following spring. Ground may be left flat or bedded up over winter. On bedded ground, knock 
beds down to desired height before planting, moving some treated soil from beds into furrow. Where soil is left flat
over winter, be careful not to turn up untreated soil during spring bedding operations. Destroy established weeds 
during seed bed preparation. Prior to planting, destroy any weeds which have become established in furrow due to 
uncovering of untreated soil. Do not apply this product in the fall to soils that are wet or subject to prolonged periods 
of flooding, or where rice was grown the previous year.
INCORPORATIONS DIRECTIONS
Incorporation Before Planting
This product must be soil-incorporated within 24 hours of application either by mechanical incorporation or at least 0.5 
acre inch of water (rainfall, irrigation). If a second incorporation is needed it should be delayed 3 to 5 days after the first 
incorporation and be completed prior to planting.
A minimum delay of 7 days after the first incorporation is recommended for certain uses in small grains. Incorporation 
should place the Trifluralin 10G into the top 2 to 3 inches of the final seedbed or erratic weed control and/or crop injury 
may result. Generally, incorporation equipment will place the chemical approximately half as deep as the equipment 
is run. For example, a disc running 4 inches deep will incorporate Trifluralin 10G approximately 2 inches deep.
Incorporation in Established Crops
Check crop list for those crops approved for incorporation in certain established crops.
Incorporation in Bedded Culture
For effective weed control, Trifluralin 10G should be incorporated into the top 2 to 3 inches of the final seedbed.
Application prior to Bedding
Apply and make first incorporation with recommended equipment. The bedding operation serves as the second 
incorporation. Do not expose untreated soil during post-bedding operations*.
Application after Bedding
Knock off beds to planting height before applying. Apply Trifluralin 10G and incorporate with recommended
equipment that will conform to the bed shape. Do not leave the untreated soil exposed*.
*Avoid removal of treated soil from the seed bed before or during the planting operation. Exposure of untreated
soil, will allow weeds to germinate in the drill row.

7
Incorporation Equipment
Any recommended incorporation implement may be used alone or in combination with any other recommended 
implement. Two incorporation passes are necessary unless otherwise specified. The second incorporation should not 
be deeper than the first.
Disc: Set to cut 4 to 6 inches deep and operate at 4 to 6 mph.
Field Cultivator: Set equipment to cut 3 to 4 inches deep and operate at 5 or more mph. A field cultivator is an 
implement with 3 to 4 row of sweeps, spaced at intervals of 7 inches or less and staggered so that no soil is left 
unturned. Chisel points should not be used.
Chisel Plow (for use in Northern Great Plains): The chisel plow may be used for the first incorporation pass 
only. Any other recommended incorporation implement may be used for the second pass for row crops. The chisel 
plow maybe used for any tillage or incorporation pass in the Summer Fallow program. Operate chisel plow 4 to 5 
inches deep at 4 to 6 mph.
Combination Seedbed Conditioners: Combination implements should be set to cut 3 to 4 inches deep and
operate at a speed of at least 6 mph. These implements are devined as three or more tillage devices combined 
and used as a single tool. For example, 2 to 3 rows of field cultivator c- or s- shaped shanks with an effective 
sweep spacing of 6 to 9 inches (staggered so that no soil is left unturned), followed by a spike-tooth or flextine 
harrow, followed by a ground-driven reel or basket.
Rolling Cultivator: Set to cut 2 to 4 inches deep and operate at 6 to 8 mph. Rolling cultivators are adequate for 
use on coarse and medium textured soils only.
Mulch Treader (other similar disc-type implements): Set to cut 3 to 4 inches deep and operate at 5 to 8 mph.
P.T.O Driven Equipment (tillers, cultivators, hoes): Adjust to incorporate Trifluralin 10G into the top 2 to 3 
inches of the seedbed with rators spaced to provide a clean sweep of the soil. Only one incorporation is 
necessary.
P.T.O. driven equipment should be operated at a speed greater than 4 mph.
Other Equipment: Other implements including a flexible tine-tooth harrow (Flextine or Melroe), sweep-type 
cultivator or rolling cultivator are recommended, but only for certain uses defined in the Approved Crops section of 
this label.
Cultivation after Planting
Treated soil may be shallowly cultivated without loss of weed control activity. Avoid deep cultivation since this could 
bring untreated soil to the soil surface and loss of weed control may result.
APPROVED CROPS
ALFALFA-ESTABLISHED
To control Barnyard grass, bromegrass (cheatgrass, downy brome) canarygrass, cheat (chess), crabgrass, wooly 
cupgrass, foxtail, junglerice, sandbur, and wild barley, apply 20 lbs/acre of Trifluralin 10G to established alfalfa prior 
to weed emergence with ground or aerial equipment. Trifluralin 10G may be applied during dormancy or throughout 
the growing season immediately after a cutting. A single rainfall or overhead sprinkler irrigation of .5 inches or more,
flood irrigation or furrow irrigation after application is required to activate Trifluralin 10G. If activated using furrow
irrigation, the surface of beds between furrows should be thoroughly wetted. If activating does not occur within 3 days 
after application, Trifluralin 10G should be activated using incorporation equipment that will insure thorough soil 
mixing with minimum damage to the established alfalfa. Because Trifluralin 10G does not control established weeds, 
application must be made prior to the expected time of weed germination.
Fall Application
Trifluralin 10G controls bromegrass and cheat, in addition to other weeds listed above that germinate after 
application. Apply immediately after a cutting between August 1 and October 1.
Precaution: Where the alfalfa is to be rotated to another crop in the season following a 20 lbs/acre treatment, plant 
only crops for which Trifluralin 10G can be applied as preplant incorporated treatment or crop injury may result. Apply
no more than 20 lbs. of product during any growing season. Do not cut or graze alfalfa within 21 days after application 
of this product.
ASPARAGUS-ESTABLISHED

8
Apply Trifluralin 10G as single or split application in winter or early spring after mature ferns have been removed but 
before new spears begin to emerge in order to suppress volunteer seedling asparagus and field bindweed. Apply 
post-harvest applications immediately after harvest in late spring or early summer just before ferns are allowed to 
develop.
Broadcast Application Rate/Acre:
Trifluralin 10G
Soil Texture
Split 
Application 
Single 
Application 
Coarse 5 lbs + 5 lbs. 10 lbs
Medium 7.5 lbs + 7.5 15 lbs
Fine 10 lbs + 10 lbs. 20 lbs
*Do not apply more than 10 lbs/acre on coarse soils, 15 lbs/acre on medium soils or 20 lbs/acre on fine soils during 
the calendar year.
BEANS-GUAR AND MUNGBEAN
Apply and incorporate Trifluralin 10G before planting at a rate of 5 lbs on coarse soils and 7.5 lbs on medium and fine 
soils. Use 7.5 lbs on soils with 2-5% organic matter.
BEANS - LIMA BEAN AND SNAP BEAN
Apply and incorporate Trifluralin 10G before planting at a rate of 5 lbs. on coarse and medium soils, and 7.5 lbs. on
fine soils. Use 7.5 lbs. on soils with 2-5% organic matter.
BEANS- DRY BEANS*
Apply and incorporate Trifluralin 10G in the spring before planting or in the fall. See instructions for “Fall Application’’ 
under “Application Timing’’
CARROTS*
Apply and soil incorporate Trifluralin 10G before planting.
CASTOR BEAN*
Apply and soil incorporate Trifluralin 10G before planting.
CELERY*
Apply and soil incorporate Trifluralin 10G to direct seeded or transplanted celery before planting, at planting or 
immediately after planting.
CUCURBITS - CANTALOUPE, CUCUMBER, AND WATERMELON*
Apply and incorporate Trifluralin 10G when plants have reached the 3 to 4 true leaf stage of growth. Set incorporation 
equipment to move treated soil around the base of plants during incorporation. Do not apply within 30 days of 
harvest, except for Watermelon which has a 60 day pre-harvest interval.
OKRA*
Apply and incorporate Trifluralin 10G before planting.
PEAS-SOUTHERN PEAS*
Apply and incorporate Trifluralin 10G before planting.
PEPPER (Transplant Only)*
Apply and incorporate Trifluralin 10G prior to transplanting. Do not apply after transplanting.
POTATOES*
Apply and incorporate Trifluralin 10G after planting prior to crop emergence, immediately following dragoff, or after 
potato plants have fully emerged. Set incorporation equipment so that the bed and furrow are uniformly covered with a 
layer of treated soil or potato emergence may be retarded and some brittleness can occur. If applying and 
incorporating Trifluralin 10G to potato plants that have fully emerged, do not completely cover the foliage with treated 
soil and do not cover foliage during subsequent cultivations. Be careful not to damage seed pieces or elongated 
sprouts with incorporation equipment.
*Refer to table directly below for rates. Broadcast Application Rates/Acre:
Soil Texture Trifluralin 10G

9
Coarse 5 lbs
Medium 6.25 - 7.5 lbs
Fine 7.5 - 10 lbs.
*Use 7.5 lbs on coarse and medium soils with 2-5% organic matter; 10 lbs. on fine soils with 2-5% organic matter and 
all soils with 5-10% organic matter. In areas receiving less than 20 inches total annual rain fall and irrigation, use lower 
rate in rate range.
PEAS-DRY PEA AND ENGLISH PEAS
Apply and incorporate Trifluralin 10G in the spring before planting or in the fall. Refer to instructions for “Fall 
Application’’ under “Application Timing’’ in the “General Information’’ section of this label.
Broadcast Application Rate/Acre:
Trifluralin 10G
Soil Texture Spring Application Fall* Application
Coarse 5 lbs 5 lbs.
Medium 5 lbs 6.25 - 7.5 lbs
Fine 7.5 lbs 7.5 lbs
*Trifluralin 10G may be fall applied to Dry and English Peas in the states of Idaho, Oregon and Washington.
*Use the lower rate in areas receiving less than 20 inches total annual rainfall and irrigation.
Transplanted Cole Crops
Apply and incorporate Trifluralin 10G before transplanting.
Broadcast Application Rates/Acre:
Soil Texture Trifluralin 10G
Coarse 5 lbs
Medium 6.25 - 7.5 lbs
Fine 7.5 - 10 lbs
*Use 7.5 lbs on coarse and medium soils with 2-5% organic matter and 10 lbs. on fine soils with 2-5% organic 
matter and all soils with 5-10% organic matter. In areas receiving less than 20 inches total annual rain fall and 
irrigation, use lower rate in rate range.
CORN-FIELD CORN ONLY
Uniformly apply Trifluralin 10G as a postemergence treatment following the use of preemergence herbicide to the soil
surface when the crop is well established (2 true leaf stage or taller), or immediately after a cultivation, up to a height 
of 30 inches. Incorporation should take place within 24 hours after application with one pass of a sweep-type 
cultivator or properly adjusted rolling cultivator. Trifluralin 10G does not control established weeds.
Do not apply Trifluralin 10G within 6 weeks prior to harvesting forage, fodder or silage or after corn is 30 inches tall.
Precautions
Do not apply Trifluralin 10G to sweet corn, popcorn, or corn grown for seed. Also, do not apply as preplant or 
preemergence treatment or crop injury may occur.
Broadcast Application Rates/Acre:
Soil Texture Trifluralin 10G
Coarse 3.75-5* lbs
Medium 5 - 7.5 lbs
Fine 7.5 - 10 lbs
*When used in Alabama, Florida, Georgia, North Carolina, South Carolina and Virginia on coarse soils to control fall 
panicum and Texas panicum, use 5 to 7.5 lbs/acre.
*Apply lower rate in rate range in areas receiving less than 20 inches total annual rainfall and irrigation.
COTTON
Trifluralin 10G may be applied and incorporated before or at planting, immediately after planting, at layby, or in the 
fall. When incorporating Trifluralin 10G after planting, be careful not to disturb the seed.

10
Broadcast Application Rate/Acre:
Trifluralin 10G
Spring*
Application
Fall Application
Soil Texture Eastern U.S.** Western U.S.***
Coarse 
Medium 
Fine
5 lbs
6.25-7.5 lbs
7.5-10 lbs
10 lbs
10 lbs
12.5 lbs
7.5 lbs 10 lbs
12.5 lbs
CHICORY/ENDIVE
Trifluralin 10G may be applied as a preplant soil incorporated treatment in spring or early summer prior to planting to 
chicory grown either as a root crop or leafy vegetable as indicated below:
Cichorium intybus, considered to be a root crop, may yield the following: Chicory-the dried and processed root 
used as a coffee substitute.
Radicchio-green leaves harvested from field grown plantings.
Belgian Endive-white leaves grown in the dark from field grown rootstalks.
Cichorium endiva, considered to be a leafy vegetable, may yield the following: Escarole-curly green leaves from 
field grown plantings.
Endive-very curly green leaves from field grown plantings.
Broadcast Application Rates per Acre:
Soil Texture Trifluralin 10G
Coarse 5 lbs
Medium 7.5 lbs
Fine 10 lbs
*Use 7.5 lbs. on coarse and medium soils with 2-5% organic matter; 10 lbs. on fine soils with 2-5% organic matter and 
all soils with 5-10% organic matter.
COLE CROPS-BROCCOLI, BRUSSELS SPROUTS, CABBAGE AND CAULIFLOWER
Direct Seeded Cole Crops
Trifluralin 10G may be applied and incorporated before planting at a rate of 5 lbs for coarse and medium soils and 7.5 
lbs on fine soils. Use 7.5 lbs on all soils with 2-5% organic matter.
Precaution: Direct seeded cole crops exhibit marginal tolerance to higher than recommended rates of Trifluralin 
10G. Stunting or reduced stands may occur.
*Spring Application: Use 7.5 lbs on coarse and medium soils with 2-5% organic matter; 10 lbs on fine soils with 2-5% 
organic matter and all soils with 5-10% organic matter.
Use lower rate in rate range in areas receiving less than 20 inches total annual rain fall and irrigation.
**Fall Application: Use rates for eastern cotton producing areas including Alabama, Arkansas, northern Florida, 
Georgia, Louisiana, Mississippi, southeastern Missouri (Bootheel), North Carolina, New Mexico, Oklahoma, South 
Carolina, Tennessee and Texas.
***Fall Application: Use rates for western cotton producing areas including Arizona, California, and Nevada.
For cotton grown in areas other than those listed above, fall apply Trifluralin 10G at broadcast rates recommended for
areas receiving greater than 20 inches of annual rainfall and irrigation.
Layby Treatment
Trifluralin 10G may be applied and incorporated any time up to layby, but not less than 90 days before harvest. Apply 
so that there is uniform distribution of granules on the soil surface beneath cotton plants. Use the same rates as for
preplant incorporated treatments. Soil incorporate using one pass of a sweep-type cultivator or properly adjusted 
rolling cultivator.
Preemergence Overlay Applications Following Trifluralin 10G
Apply Trifluralin 10G as a preplant incorporated treatment. Overlay applications of products registered for use on 
cotton may control additional weeds tolerant to Trifluralin 10G. Such applications may be made unless use following a 
Trifluralin 10G application is specifically prohibited by the product label. Refer to the overlay product label for

11
additional weeds controlled, directions for use, cautions and limitations before use TRIFLURALIN 10G
Postemergence Applications Following Trifluralin 10G
Apply Trifluralin 10G as a preplant incorporated treatment. The use of postemergent applications of products 
registered for use on cotton may control additional weeds tolerant to Trifluralin 10G. Such treatments may be made 
unless use following a Trifluralin 10G application is specifically prohibited by the product label. Consult the 
postemergence product label for additional weeds controlled, directions for use, cautions and limitations before use.
FLAX (Fall Application Only)
Use Trifluralin 10G at a rate of 5 lbs/acre on coarse soils, 7.5 lbs/acre on medium soils, and 10 lbs/ acre on fine soils.
Product should be applied and incorporated in the fall between September 1 to December 31 in California, Minnesota, 
North Dakota, and South Dakota and between October 15 and December 31 in all other states. Refer to instructions 
for “Fall Applications’’ under “Application Timing’’. Incorporation or other tillage performed in the spring prior to seeding 
should be relatively shallow in order to maintain a firm seedbed, which should be packed just prior to seeding. Seed 
into moist seedbed no more than 1.5 inches deep with a press or hoe drill. Flax should not be seeded until the 
seedbed has warmed up.
GRAIN SORGHUM (Milo)
Apply Trifluralin 10G uniformly to the soil surface when grain sorghum is 8 inches tall or taller. Apply as a 
postemergence treatment following the use of a preemergence herbicide. Cultivate before application to move
established weeds and cover the base of plants with soil. Set cultivation equipment to add approximately one inch of 
soil to the base of sorghum plants. Trifluralin 10G should be incorporated within 24 hours after application with one 
pass of a sweep-type cultivator or properly adjusted rolling cultivator.
Broadcast Application Rates/Acre:
Soil Texture Trifluralin 10G
Coarse 4 - 5 lbs
Medium 5 - 7.5 lbs
Fine 7.5 - 10 lbs
*In areas receiving less than 20 inches total annual rainfall and irrigation, lower rate in range should be applied.
GREENS-TURNIP GREENS GROWN FOR PROCESSING
(Collard, Kale, and Mustard Greens)
Apply product as a preplant incorporated treatment at a rate of 5 lbs/acre to coarse soils; 7.5 lbs/acre to medium and 
fine soils.
HOPS
Apply and incorporate Trifluralin 10G to established hops during dormancy at a rate of 5 lbs/acre for coarse soils, and 
6.25 - 7.5 lbs/acre for medium and fine soils. Incorporate once using incorporation equipment that will insure thorough 
soil mixing with minimal damage to crop stand. Use 7.5 lbs/acre on coarse and medium soils with 2-5% organic matter.
MUSTARD
(Grown for seed or processing for food in Minnesota, North Dakota, and South Dakota)
Apply and incorporate Trifluralin 10G before planting at a rate of 5 lbs/acre for coarse soils, and 7.5 lbs/acre for 
medium and fine soils.
PEANUTS
Spanish Peanuts, Florunner and Florigiant Varieties (For Use in Texas, Oklahoma and New Mexico)
Apply and incorporate Trifluralin 10G before planting, at planting or immediately after planting at a rate of 5 lbs/acre on 
coarse soils and 7.5 lbs/acre on medium soils. When incorporating after planting, be careful not to disturb the seed.
RAPESEED (CANOLA)
Trifluralin 10G should be applied and incorporated in the spring or in the fall at a rate of 5 lbs/acre for coarse soils, 7.5
lbs/acre for medium soils, and 10 lbs/acre on fine soils. Refer to “Fall Application’’ under “Application Timing’’ 
instructions on this label.
SAFFLOWER
Trifluralin 10G should be applied in the spring before planting, or in the fall. See instruction for “Fall Applications’’ under 
“Application Timing’’ instruction on this label.
Broadcast Application Rate/Acre:

12
Soil 
Texture
Trifluralin 10G
Spring* 
Application
Fall** 
Application
Coarse 5 lbs 7.5 lbs
Medium 6.25 - 7.5 lbs 10 lbs
Fine 7.5 - 10 lbs 12.5 lbs
*Spring Application: Use 7.5 lbs on coarse and medium soils with 2-5% organic matter; 10 lbs on fine soils with 2-5% 
organic matter; and 10-12.5 lbs on all soils with 5-10% organic matter. Use lower rate in range in areas receiving less 
than 20 inches total annual rain fall and irrigation.
**Trifluralin 10G may be fall applied to Safflower in Arizona, California, Idaho, Nevada, Oregon, Utah, Washington, 
and Wyoming.
SMALL GRAIN - BARLEY, DURUM AND WHEAT
General Information
Use any of the following implements listed below in the manner described for the first incorporation of Trifluralin 10G.
Use only a disc or field cultivator for the second incorporation pass and incorporate in a different direction. Poor weed 
control may result if untreated soil is moved to the surface during the second incorporation pass. To avoid this 
problem, the second incorporation should not be deeper than the first.
Chisel Plow: May be used for the first incorporation pass only. It should be operated at 4 to 6 mph and 4 to 5 inches 
deep. Stagger sweeps so that no soil is left unturned.
Tandem Disc: Operate at 3 to 4 inches deep and at 4 to 6 mph.
Field Cultivator: Operate at 5 or more mph and at 3 to 4 inches deep. Stagger sweeps so that no soil is left 
unturned.
Precautions
Under certain conditions, delayed crop emergence and/or stand reduction may occur when Trifluralin 10G is applied 
to barley, durum, or wheat. The combined effect of certain cultural practices and unfavorable soil or environmental 
conditions may cause excessive crop seedling stress resulting in retarded crop growth, stand reduction and possibly 
reduced yield. For best result, observe the following practices and precautions:
• Provide a uniformly firm seedbed and time tillage operation to conserve moisture. Irrigate prior to 
planting or after germination and emergence.
• When planting seed, set drills to place seed at the depth specified in use directions. A planting depth 
greater than 2.5 inches for spring wheat or durum will result in increased seedling stress and decreased
emergence.
• If seed treatments are used, apply at the correct rate and uniformly across all seeds.
• Do not fall apply Trifluralin 10G in combination with any other preplant incorporated herbicide.
• High salinity, eroded knolls/hilltops, loose dry soils and compaction may contribute to seedling stress.
• Cold and/or wet soils, excessively hot soils, excessive moisture, drought, and soil crusting from heavy 
rainfall may also contribute to crop seedling stress.
Barley, Spring Seeded—Fall Applications (For Use in Minnesota, North Dakota and South Dakota)
Apply in the fall for general weed control during the following growing season. Incorporate once within 24 hours and a 
second time before planting to destroy existing weeds and insure uniform distribution of Trifluralin 10G in soil. The
second incorporation should occur at least 7 days after the first. Set planting equipment to place seed approximately 
2 inches deep.
Note: See recommendation on incorporation and equipment in the beginning of this section.
Broadcast Application Rate/Acre:
Soil Texture Trifluralin 10G
Coarse 5 lbs
Medium 7.5 lbs
Fine 7.5 lbs
When applied at 7.5 lbs/acre, Trifluralin 10G will provide partial control or suppres- sion of kochia and Russian thistle.
Barley, Spring Seeded—Spring Application for Use In Barley Used as a Cover Crop or in the Acreage 
Conservation Reserve Program (For use in Minnesota, North Dakota, and South Dakota)

13
For control of foxtail (pigeongrass), apply Trifluralin 10G in the spring as a preplant incorporated treatment. 
Incorporate one time within 24 hours and a second time before planting to destroy existing weeds and insure uniform 
distribution of this product in soil. The second incorporation should be completed at least 7 days after the first. Set 
planting equipment to lace seed approximately 2 inches deep.
See recommendations on incorporation and equipment at the beginning of this section.
Broadcast Application Rates/Acre:
Soil Texture Trifluralin 10G
Coarse 5 lbs
Medium 7.5 lbs
Fine 7.5 lbs
*Use of this practice may result in a slight stand reduction. Follow the most severe grazing restrictions imposed by
either this label or the USDA Acreage Conservation Reserve Program, whichever is longest. Consult the local ASCS 
office or state agency to determine the restriction period.
Spring Seeded Wheat or Durum—Fall Application
Apply this product in the fall for foxtail (pigeongrass) control during the following growing season. Incorporate one time 
within 24 hours, and a second time before planting to destroy existing weeds and insure a uniform distribution of 
Trifluralin 10G in soil. Set planting equipment to place seed approximate 2 inches deep. See recommendation on 
incorporation and equipment at the beginning of this section.
Broadcast Application Rate/Acre:
Soil Texture Trifluralin 10G
Coarse 5 lbs
Medium 5 lbs
Fine 7.5 lbs
Winter Wheat—Preplant Incorporated (For Use in Idaho, Oregon, and Washington)*
For control of cheatgrass and other annual grasses, apply Trifluralin 10G as a preplant incorporated treatment up to 3 
weeks before planting. See recommendations on incorporation direction below.
Winter Wheat—Fallow Soil Application (For Use in Idaho, Oregon, Washington)*
For control of cheatgrass and certain other annual grasses and broadleaf weed during the fallow period and during the 
following growing season, apply and shallowly incorporate Trifluralin 10G up to 4 months before planting.
*See following table for rates and instructions. Broadcast Application Rate/Acre:
Soil Texture Trifluralin 10G
Coarse 7.5 lbs
Medium 7.5 lbs
Fine 10 lbs
Incorporation Directions for Preplant and Fallow Soil Application
Incorporate with a flexible tine-toothharrow (flextine or Melroe), set to cut 1 to 2 inches deep and operated at 3 to 6 
mph. Thorough incorporation requires 2 incorporation passes over the field in different directions. Incorporate 1 time 
within 24 hours of application. A required second incorporation pass prior to planting should occur at least 5 days after 
the first. Do not till the soil with a disc after this product has been incorporated with a flexible tine harrow.
Planting Directions for Preplant and Fallow Soil Application
Use only deep furrow or semi-deep furrow drill that will place the seed below the zone into which Trifluralin 10G has 
been incorporated.
Precaution: Do not plant wheat directly into the zone of soil treated with Trifluralin 10G as crop injury may occur.
Summer Fallow Weed Control Followed Spring Seeded Wheat, Durum, or Barley
Trifluralin 10G may be applied for control of labeled weeds in the summer fallow period and for pigeongrass (foxtail) 
control in wheat, durum, and barley seeded the following spring. Apply this product to standing stubble or land which 
has been fallowed or pretilled. Existing weeds and surface debris should be reduced by tillage if the exist in quantities 
that will prevent uniform soil incorporation. The first incorporation is required within 24 hours after application, and the

14
second may occur in conjunction with tillage to destroy resistant weed growth during the remainder of the fallow year. 
During the fallow year, susceptible weeds may not be controlled until after the second incorporation. See 
recommendations on incorporation and incorporation equipment at the beginning of this section. Wheat, durum, or 
barley should be seeded approximately 2 inches deep.
Broadcast Application Rates/Acre:
Application Date
Trifluralin 10G
Areas with less 
than 10 inches 
annual rainfall
All other areas
April 15 - April 30 8.75 lbs 10 lbs
May 1 - May 31 8.75 - 7.5 lbs 10 lbs - 8.75 lbs
June 1 - June 30 7.5 - 6.25 lbs 8.75 - 7.5 lbs
July 1 - July 31 6.25 - 5 lbs 7.5 - 6.25 lbs
August 1 - August 31 5 lbs 6.25 - 5 lbs
*Where rate range is shown, use the higher rate per acre during the early part of an application period and the
lower rate per acre during the latter part of an application period.
SOYBEANS
Apply and incorporate Trifluralin 10G in the spring prior to planting or in the fall. See instructions for “Fall Application’’ 
under “Application Timing’’.
Broadcast Application Rates/Acre:
Soil Texture Trifluralin 
Spring * Fall** Application
Coarse 5 lbs 10 lbs
Medium 7.5 lbs 10 lbs
Fine 10 lbs 12.5 lbs
* Spring Application: Use 7.5 lbs on coarse and medium soils with 2 - 5% organic matter; 10 lbs on fine soils with 2 -
5% organic matter; and 10-12.5 lbs on all soils with 5 - 10% organic matter.
**Fall Application: Use rates for soybeans grown in Alabama, Arkansas, Northern Florida, Georgia, Louisiana, 
Mississippi, southeastern Missouri (Bootheel), North Carolina, Oklahoma, South Carolina, Tennessee, and Texas. 
For soybeans grown in areas other than those listed above, fall apply Trifluralin 10G at broadcast rates recommended 
for areas receiving greater than 20 inches of annual rainfall and irrigation.
Precaution: Do not fall apply Trifluralin 10G in the fall to soils which are wet or subject to prolonged periods of 
flooding, or where rice was grown the previous year.
Preemergence Overlay Applications Following Trifluralin 10G
Apply Trifluralin 10G as a preplant incorporated treatment. Additional weeds tolerant to Trifluralin 10G may be 
controlled using preemergence overlay applications of other products registered of use on soybeans. Such treatments 
may be made unless use following a Trifluralin 10G application is specifically prohibited by the product label. Consult 
the overlay product label for additional weeds controlled, directions for use, and cautions before use.
Postemergence Treatments Following Trifluralin 10G
Apply Trifluralin 10G as a preplant incorporated treatment. Additional weeds tolerant to Trifluralin 10G may be 
controlled using postemergence applications of other products registered for use on soybeans. Such treatments may 
be made, unless use following Trifluralin 10G application is specifically prohibited by the product label. Consult the 
overlay or postemergence product label for additional weeds controlled, directions for use, caution, and limitations 
before use.
SUGAR BEETS
Apply and incorporate Trifluralin 10G when sugar beets are 2 to 6 inches tall. Precaution: To reduce the possibility of 
girdling, exposed sugarbeet roots should be covered with soil before applying Trifluralin 10G. When incorporating, set
equipment to move treated soil into the row.

15
Soil Texture Trifluralin 10G
Coarse 5 lbs
Medium 6.25 - 7.5 lbs
Fine 6.25 - 7.5 lbs
Use lower rate in rate range in areas receiving less than 20 inches total annual rainfall and irrigation.
SUGARCANE
Apply and incorporate Trifluralin 10G twice a year at a rate of 10 - 20 lbs for all soil textures. Make the first application 
in the fall on firmly packed beds immediately after the seed pieces are planted and a second application in the spring 
before or shortly after the cane emerges. Loosen rain-packed beds 2 to 3 inches deep before spring application.
Applications Up to Layby for Plant Cane or Ratoon Cane (For Use in Louisiana and Texas) and Itchgrass 
Control (for Use in Louisiana)
Apply and incorporate this product at a rate of 10 - 20 lbs shortly before or after cane emergence until layby. For 
itchgrass control, apply and incorporate Trifluralin 10G on plant or ratoon cane. Apply after beds have been shaved or 
false shaved. Loosen rain-packed beds 2 to 3 inches deep before application. Incorporate with a rolling cultivator or 
bed chopper for all soil textures. Set chopper to cut 3 to 4 inches deep and operate at 4 to 6 mph. Two incorporation 
passes are necessary.
SUNFLOWERS*
Apply and incorporate Trifluralin 10G in the spring or in the fall between September 15 and December 31 in California, 
Minnesota, North Dakota, and South Dakota, and between October 15 and December 31 in other states.
TOMATOES*
For direct seeded tomato, apply Trifluralin 10G at blocking or thinning to the soil between rows and beneath plants 
and incorporate. For transplant tomatoes, apply and incorporate prior to transplanting only. Do not apply this product 
after transplanting.
*Refer to the table below for application rates Broadcast Application Rates/Acre:
Soil Texture Trifluralin 10G
Coarse 5 lbs
Medium 6.25 - 7.5 lbs
Fine 7.5 - 10 lbs
Use 7.5 lbs on coarse and medium soils with 2 5% organic matter; 10 lbs on fine soils with 2 - 5% organic matter and 
on all soils with 5 - 10% organic matter; and use the lower rate in range in areas receiving less than 20 inches total 
annual rainfall and irrigation.
TREE AND VINE CROPS-CITRUS, FRUIT AND NUT CROPS AND VINEYARDS
For new plantings to almond, apricot, grapefruit, lemon, nectarine, orange, peach, pecan, plum, prune, tangelo, 
tangerine, and walnut trees, apply and incorporate Trifluralin 10G before planting.
Broadcast Application Rates/Acre:
Soil Texture Trifluralin 10G
Coarse 5 lbs
Medium 6.25 - 7.5 lbs
Fine 7.5 lbs
Use 7.5 - 10 lbs on all soils with 2 - 5% organic matter; 10 lbs on all soils with 5-10% organic matter. Use lower rate in 
rate range in areas receiving less than 20 inches total annual rainfall and irrigation. For new plantings of vineyards,
apply and incorporate Trifluralin 10G before planting at the following rate/acre:
Soil Texture Trifluralin 10G
Coarse 5 - 7.5 lbs
Medium 7.5 - 15 lbs

16
Fine 15 - 20 lbs
Use 15 - 20 lbs on all soils with 2 - 10% organic matter. Use the lower rate in rate range in areas receiving less than 20 
inches total annual rainfall and irrigation. Do not use more than 10 lbs/acre on heat treated grape rooting.
Trifluralin 10G may be applied at a rate of 10 lbs - 20 lbs in established non-bearing and bearing vineyards and planting 
of almond, apricot, grapefruit, lemon, nectarine, orange peach, pecan, plum, prune, tangelo, tangerine, and walnut 
trees. In established plantings apply to the soil surface and use incorporation methods not injurious to the crop. Do not 
apply to vineyards within 60 days of harvest.
CONTAINER GROWN ORNAMENTALS, LANDSCAPE ORNAMENTALS, NURSERY STOCK, GROUND 
COVERS, ESTABLISHED FLOWERS, ORNAMENTAL BULBS, NON- BEARING FRUIT AND NUT TREES AND 
NON-BEARING VINEYARDS, AND CHRISTMAS TREE PLANTATIONS
Trifluralin 10G is recommended as a preemergence treatment for control of certain annual grasses and broadleaf 
weeds in container grown ornamentals, landscape ornamentals, nursery stock, ground covers, established flowers, 
ornamental bulbs, non-bearing fruit and nut trees and non-bearing vineyards, and Christmas tree plantations. Apply 40 
lbs./A (.9 lbs./1000 sq.ft.) Trifluralin 10G before or after planting but prior to germination of target weeds, or immediately
after cultivation. Length of weed control will vary with weed population, potting media or soil conditions, temperature,
watering regime, and other factors. Following application, user should monitor and observe level of weed control over 
time to determine when additional applications may be needed. Repeat application should not be made sooner than 60 
days after a previous application of Trifluralin 10G. Do not apply over 120 pounds per acre total of Trifluralin 10G within
a 12-month period.
Trifluralin 10G does not control established weeds. Existing weeds should be controlled by cultivation or with 
postemergence herbicides. Weed residues, prunings and trash should be removed or thoroughly mixed into soil prior to 
treatment. Soil should be in good condition and free of clods at the time of application. A single rainfall or sprinkler 
irrigation of 0.5 inches or more, or flood irrigation, is required to activate Trifluralin 10G. Optimum weed control is 
obtained when Trifluralin 10G is activated within 3 days of application. If rainfall or irrigation has not occurred within 3 
days of application and tillage is possible, Trifluralin 10G may be activated using cultivation equipment capable of 
uniformly mixing the herbicide into the upper 1-2 inches of soil. Failure to activate Trifluralin 10G within 3 days of 
application may result in erratic weed control. Do not apply when wind conditions favor drift of Trifluralin 10G granules 
from the target area. Optimum weed control will be obtained when followed by overhead irrigation or rainfall within a 
few hours after surface application.
Special Use Precautions: To avoid possible injury, do not apply Trifluralin 10G to:
x Nursery forest or Christmas Tree seedling beds, cutting beds, or transplant beds
x Unrooted liners or cuttings that have been planted in pots for the first time
x Pots less than four inches wide
x Ground covers until they are established and well rooted
Do not apply Trifluralin 10G to newly transplanted ornamentals, nursery stock, ground covers, flowers, and non-
bearing fruit and nut crops and non-bearing vineyards until soil or potting media has been settled by packing and
irrigation or rainfall and no cracks are present or injury may occur.
Do not make preplant applications of Trifluralin 10G to areas where gladioli corms less than one inch in diameter will 
be planted or injury may occur.
Do not apply Trifluralin 10G in greenhouse or other enclosed structures.
Users who wish to use Trifluralin 10G on plant species not recommended on this label may determine suitability for 
such uses by making trial application of Trifluralin 10G at a recommended rate to small numbers of plants. Prior to 
using Trifluralin 10G on a large number of plants, the treated plants should be observed for signs of herbicidal injury 
during 30 to 60 days of normal growing conditions to determine if the treatment is non-injurious to the target plant 
species. The user assumes responsibility for any plant damage or other liability resulting from the use of Trifluralin 
10G on plant species not recommended on this label. Trifluralin 10G may be used on the following established plant
species when container grown or field grown:
TREES
Scientific Name Common Name
Abies balsamea Balsam fir

17
Abies concolor White fir
Abution hybridum Albus -flowering maple
Luteus-flowering maple 
Roseus-flowering maple 
Tangerine-flowering maple
Vesuvius red-flowering maple
Acer gimmala Flame maple
Acer platanoides Norway maple
Acer rubrum Red maple
Red sunset maple
Acer saccharinum Silver maple
Acer saccharum Sugar maple
Areacastrum romanzoffianum Queen palm
Betula nigra River birch
Betula papyrifera Paper birch
Betula pendula European white birch
Brachychiton populneus Bottle tree
Bucida buceras Black olive
Castanea mollissima Chinese chestnut
Ceratonia siliqua Carob
Cercis canadensis Redbud
Chamaecyparis obtusa Filicoides -fernspray cypress
Gracilis-slender Hinoki cypress
Chamecyparis pisifera Swara false cypress 
Squarrosa-moss cypress
Chamaedorea cataractarum Palm
Chamaedorea costaricana Palm
Chamaedorea elegans Parlor Palm
Cornus florida Cloud nine dogwood
Flowering dogwood
Cornus kousa Dogwood, kousa
Crataegus viridis Green hawthorn
Cupaniopsis anacardioides Carrot wood
Cupressus glabra Arizona cypress
Elaeagnus angustifolia Russian olive
Eucalyptus camaldulenisis Redgum eucalyptus
Eucalyptus cinerea Mealy eucalyptus
Silver dollar eucalyptus
Eucalyptus microtheca Coolibah tree
Eucalyptus sideroxyion Red ironbark eucalyptus
Ficus benjamina Ficus
Mini ficus
Fraxinus americana White ash
Fraxinus udhei Shamel ash
Ginko biloba Ginko-maidenhair tree
Gleditsia triacanthos Honey locust
Shademaster honey locust
Heteromeles arbutiflora Toyon
Illicium floridanum Florida anise-tree
Juniperus virginiana Eastern red cedar
Larix kaempferi Japanese larch
Liquidambar styraciflue American sweet gum
Liriodendron tuilipifera Tuliptree
Magnolia grandiflora Southern magnolia
Malus spp. Crabapple
Morus alba White mulberry
Musa aluminata Banana
Nyssa sylvatica Blackgum
Oxydendrum arboreum Sourwood

18
Picea abies Norway spruce
Pendula-weeping Norway spruce
Repens-spreading Norway spruce
Picea glauca conica Dwarf Alberta spruce
Picea glauca White spruce
Picea pungens Dwarf globe blue spruce
Glauca-Colorado blue spruce 
Hoopsii-Hoop blue spruce 
Koster-Koster blue spruce
Pinus aristata Bristlecone pine
Pinus canariensis Canary Island pine
Pinus contorta Shore pine, beach pine
Pinus eldarica Eldarica pine
Pinus leucodermis Bosnian pine
Pinus mugo Pumilio-shrubby swiss mountain pine
Pinus nigra Austrian black pine
Pinus radiata Monterey pine
Pinus resinosa Red pine
Pinus taeda Loblolly pine
Pinus strobus White pine
Pinus sylvestris Columnar Scotch pine
Scotch pine
Pinus thunbergiana Japanese black pine
Platanus acerifolia London planetree
Platanus occicentalis American sycamore
Platanus racemosa California sycamore
Podocarppus spp. Podocarpus
Populus deltoids Cottonwood
Prosopis chilensis Chilian mesquite
Prunus yedoensis Yoshino flowering cherry
Pseudotsuga menziesii Douglas fir
Quercus coccinea Scarlet oak
Quercus ilicifolia Bear oak
Quercus palustris Pin oak
Quercus phellos Willow oak
Quercus rubra Red oak
Quercus virginiana Live oak
Robinia pseudoacacia Black locust
Salix spp. Willow
Sequoiadendron giganteum Giant sequoia
Swietenia mahogani Mahogany
Tabebuia caraiba Yellow tab
Taxodium distichum Bald cypress
Tsuga canadensis Eastern hemlock
Ulmus parvifolia Chinese elm
Washingtonia robusta Mexican fan palm
ORNAMENTAL SHRUBS
Scientific name Common Name
Abelia grandiflora Edward Goucher abelia
Glossy abelia
Acacia abyssinica Abyssinica acacia
Acacia redolens Prostrate acacia
Acacia stenophylla Shoestring acacia
Acalypha wilkesiana Copper leaf
Acer ginnala Amur maple
Acer palmatum Coral bark Japanese maple
Dwarf Japanese maple
Agave americana Century plant

19
Astilbe chinensis False spiraea
Athyrium nipponimcum Japanese painted fern
Baccharis pilularis Coyotebush
Berberis gladwynensii William Penn barberry
Berberis mentorensis Mentor barberry
Berberis thunbergii Atropurea -redleaf Japanese barberry
Aurea-golden Japanese barberry 
Crimson pygmy barberry
Rose glow barberry
Bougainvillea spp. Barbara Karst 
California gold 
Pink pixie 
Scarlet O’Hara 
Temple fire 
Texas dawn
Buxus microphylla japonica Japanese boxwood
Buxus microphylla Koreana Korean boxwood
Buxus sempervirens Common boxwood
Callistemon citrinus Lemon bottlebrush
Callistemon viminalis Weeping bottlebrush
Calluna vulgaris Spring torch scotch heather
Camellia sasanqua Sasanqua camellia
Camellia japonica Japanese camellia
Cassia artemisioides Feathery cassia
Ceanothus spp. Wild lilac
Cephalotaxus drupacae Plum yew
Cerastium tomentosum Snow-in-summer
Chamaecyparis obtusa spp. Kosteri cypress
Nana-dwarf Hinoki cypress 
Torulosa cypress
Chamaecyparis pisifera Filifera-thread cypress
Chrysalidocarpus lutescens Areca palm
Clethra alnifolia Summersweet
Cleyera japonica Japanese cleyera
Cornus alba Sibirica -Siberian dogwood
Cornus stolonifera Baileyi red osier dogwood
Flaviraqmea-yellow twig dogwood
Cotinus coggygria Royal purple smoke tree
Cotinus dammeri Coral beauty smoke tree 
Eichholz smoke tree
Cotoneaster adpressus Praecox-early cotoneaster
Cotoneaster apiculatus Cranberry cotoneaster
Cotoneaster congestus Pyrenees cotoneaster
Cotoneaster dammeri Bearberry cotoneaster
Cotoneaster himalayan Himalayan cotoneaster
Cotoneaster horizontalis Rock cotoneaster
Cotoneaster zabelii Zabel cotoneaster
Cycas revoluta Saga palm
Cytisus praecox Hollandia-warminster broom
Cytisus scoparius Lena-Scotch broom
Daphne odora Fragrant daphne
Deutzia spp. Deutzia
Dodonea viscose Hopseed bush
Elaeagnus pungens Fruitland silver berry
Erica cinerea Purple bell heather
Erica x darleyensa Mediterranean pink heather
Erica vagans Cornish heather
Euonymus alatus Winged
euonymus

20
Euonymus fortunei Candale gold euonymus
Emerald’n gold euonymus 
Sunspot euonymus 
Wintercreeper euonymus
Euonymus japonica Silver king-euonymus
Variegated evergreen euonymus
Euonymus kiautschovica Spreading euonymus
Feijoa sellowiana Pineapple guava
Forsythia spp. Forsythia
Gardenia jasminoides August beauty gardenia
Gardenia
Radican gardenia
Gaultheria shallon Salal/lemon leaf
Gelsemium sempervirens Carolina jessamine
Genista pilosa Woadwaxen
Hibiscus rosa-sinensis Ross Estey-hibiscus
Hibiscus syriacus Rose of Sharon-heart Rose of Sharon-red bird
Rose of Sharon-woodbridge
Ilex spp. Holly
Illicium annisatum Mystery gardenia
Itea ilcifolia Henry Garnet holly leaf sweetspire
Ixora collinea Ixora
Juniperus spp. Juniper
Kalmia latifolia Mountain laurel
Lagerstroemia indica Crape myrtle
Lantana spp. Lantana
Leucothoe axillaris Coast leucothoe
Leucothoe fontainesiana Drooping leucothoe
Ligustrum spp. Privet
Livistona chinensis Chinese fountain palm
Lonicera periclymenum Flowering woodbine
Serotina woodbine
Lonicera sempervirens Trumpet honeysuckle
Mahonia bealei Leather leaf mahonia
Mahonia repens Creeping mahonia
Myrica cerifera Wax myrtle
Nandina domestica Compacta-dwarf heavenly bamboo
Harbour dwarf-heavenly bamboo 
Heavenly bamboo
Nana compacta-heavenly bamboo 
Nana purpurea-heavenly bamboo 
Woods dwarf heavenly bamboo
Nerium oleander Hardy red oleander
Oleander
Ruby lace oleander
Osmanthus fortunei Fortunes osmanthus
Philadelphus spp. Mockorange
Phoenix roeloelenii Pigmy date palm
Photinia fraseri Fraser’s photinia
Pieris japonica Japanese andromeda
Mountain fire lily-of-the-valley 
Snowdrift lily-of-the-valley 
Templebells lily-of-the-valley 
Valley rose lily-of-the-valley
Valley valentine lily-of-the-valley
Pieris japonica x forestii Forest flame lily-of-the-valley
Pinus mugo Mugo -mugho pine
Pittosporum tibira Green pittosporum
Japanese pittosporum 
Wheeler’s dwarf pittosporum
Plumbago ariculata Blue cape plumbago

21
Plumbago capensis Plumbago
Podocarpus macrophyllus Yewpine
Polystichum polyblepharum Tallen fern
Potentilla spp. Cinquefoil
Prunus caroliniana Carolina laurel cherry
Prunus gladulosa Dwarf pink flowering almond
Pyracantha spp. Pyracantha
Rhaphiolepis indica Charisma-Monruce rhaphiolepis
Enchantress-Moness rhaphiolepis
India hawthorn
Springtime-Monme rhaphiolepis
Rhaphiolepis ovata Roundleaf rhaphiolepis
Rhododendron spp. Azalea/rhododendron
Rhus lancea Africa sumac
Rosa rugosa Ramanas rose
Rosmarinus officinalis Rosemary
Skimmia japonica Japanese skimmia
Skimmia revesiana Reeve’s skimmia
Spiraea japonica Dolchia spiraea
Japanese alpine spiraea 
Shirobana spiraea
Spiraea vanhouttii Bridal wreath
Syringa rothomangensis Chinese lilac
Syringa vulgaris Common lilac
Taxus cuspidata Upright Japanese yew
Taxus media Anglojap yew
Tecomaria capensis Cape honeysuckle
Temstroemia gymnanthera
Thuja occidentalis American arborvitae
Emerald arborvitae 
Globosa-globe arborvitae 
Little giant-dwarf arborvitae
Nigra-dark American arborvitae 
Pyramidalis-pyramid arborvitae 
Rheingold arborvitae
Techny arborvitae
Thuja orientalis Aureus nana-dwarf golden arborvitae
Minima glauca-dwarf arborvitae
Veitchia merrilli Christmas palm
Viburnum spp. Viburnum
Weigela spp. Weigela
Xylosma congestum Xylosma
Yucca filamentosa Yucca
GROUND COVERS
Scientific Name Common Name
Achillea tomentosa Wooly yarrow
Agapanthus spp. Lily-of-the-nile
Ammophila breviligulata Beechgrass
Arctotheca calendula Cape weed
Armeria maritima Thrift
Asparagus densiflorus Asparagus fern
Campanula spp. Bellflower
Carex spp. Variegated carex
Carpobrotus edulis Largeleaf iceplant
Ceratostigma plumbaginoides Dwarf plumbago
Cistus spp. Rockrose
Coreopsis spp. Coreopsis
Coronilla vana Crown vetch
Cortaderia selloana Pampas grass
Cotoneaster spp. Cotoneaster
Delosperma alba White iceplant
Descampsia caespitosa Descampsia
Drosanthemum floribundum Trailing rosea iceplant
Drosanthemum hispidum Iceplant

22
Festuca ovina glauca Blue fescue
Fragaria chiloensis Strawberry beach
Gazania spp. Gazania
Hakonechloa marcroaureola Golden hakonechloa
Hedera canariensis Algerian ivy
Hedera helix English ivy
Hemerocallis spp. Daylilly
Herniaria glabra Rupturewort
Hosta lancifolia Albo-marginata hosta
Hypericum spp. Aaronsbeard
St. Johnswort
Jasminum nitidum Angelwing jasmine
Lampranthus spectabilis Trailing iceplant
Liriope gigantea White lily turf
Liriope muscari Big blue lily turf
Lilac beauty lily turf 
Magestic lily turf 
Silvery sunproof lily turf
Variegated liriope lily turf
Liriope spicata Green/creeping lily turf
Miscanthus sinensis Eulalia grass
Muehlenbeckia axillaris Creeping wirevine
Myoporum laetum Myoporum
Ophiopogon japonicus Dwarf Mondo grass
Mondo grass
Osteospermum fruticosum Trailing African daisy
Pachysandra terminalis Japanese spurge
Pennisetum alopecuroides Fountain grass
Phalaris arundinacea picta Ribbon grass
Sedum spp. Stonecrop (sedum)
Teucrium chamaedrys Germander
Trachelospermum asiaticum Asian jasmine
Verbena spp. Verbena
Veronica spp. Speedwell
Vinca spp. Periwinkle
ESTABLISHED FLOWERS
Scientific Name Common Name
Achillea spp. Yarrow
Ageratum houstonianum Floss flower
Alyssum spp. Alyssum
Antirrhinum majus Snapdragon
Arctotis spp. African daisy
Artemisis stellerana Dusty miller
Aster spp. Aster (perennial)
Calendula Officianalis Calendula
Centaurea cyanus Cornflower
Centaurea gymnocarpa Velvet centaurea
Centaurea moschata Sweet sultan
Chrysanthemum spp. Chrysanthemum
Convolvulus spp. Morningglory
Coreopsis spp. Coreopsis
Cosmos spp. Cosmos
Dahlia spp. Dahlia
Dianthus spp. Dianthus
Dimorphotheca spp. Marigold, cape
Euphorbia marginata Snow-on-the-mountain
Geum spp. Geum
Gaillardia spp. Gaillardia
Gladiolus spp. Gladiolus
Gypsophila paniculata Baby’s breath
Helianthus spp. Sunflower
Impatiens balsamina Balsam
Impatiens spp. Impatiens

23
Ixora spp. Ixora
Lathyrus odoratus Sweet pea
Limonium spp. Statice
Lobelia spp. Lobelia
Lobularia maritima Sweet alyssum
Lupinus spp. Lupine
Matthiola spp. Stock
Mirabilis jalapa Four o’clock
Myosotis spp. Forget-me-not
Nicotiana spp. Nicotiana
Papver spp. Poppy, California
Petunia hybrida Petunia
Phlox spp. Phlox
Portulaca grandiflora Portulaca
Rosa spp. Rose
Rudbeckia hirta Blackeyed susan
Rudbeckia laciniata Golden glow
Salvia spp. Salvia
Scabinosa spp. Pincushion flower
Stachys spp. Lamb’s ears
Stokesia laevis Stoke’s aster
Tagetes spp. Marigold
Tropaeolum spp. Nasturtium
Vinca spp. Vinca
Zinnea spp. Zinnia
ORNAMENTAL BULBS
Trifluralin 10G may be applied for control of susceptible annual weeds in ornamental bulbs, e.g., bulbous iris, daffodil 
(narcissus), hyacinth and tulip. Apply Trifluralin 10G to the soil surface 2-4 weeds after planting, but prior to the 
emergence of annual weeds. Trifluralin 10G may also be applied following bulb emergence. For fall planted bulbs, 
apply Trifluralin 10G again in late winter or early spring to weed-free soil surfaces.
CHRISTMAS TREE PLANTATIONS
Apply Trifluralin 10G to established plantings of field grown Christmas tree species listed on this label. Do not apply to 
seedbeds or seedling transplant beds. Apply only to established plantings. Established plants are defined as those that 
have been transplanted into their final growing location for a sufficient period of time to allow the soil to be firmly 
settled around the roots from packing and rainfall or irrigation.
NON-CROPLAND AREAS
Trifluralin 10G is recommended as a preemergence herbicide for control of certain annual grasses and broadleaf 
weeds on industrial sites, utility substations, highway guard rails, sign posts and delineators.
Apply Trifluralin 10G anytime prior to germination of target weeds. Areas to be treated should be free of established
weeds or existing weeds should be controlled with postemergence herbicides.
USE UNDER PAVED SURFACES
Site Preparation
Trifluralin 10G should be used only where the area to be treated has been prepared according to good construction 
practices. If rhizomes, stolons, tubers or other vegetative plant parts are present in the site, they should be removed by
scalping with grader blade to a depth sufficient to ensure their complete removal.
Application
Applications should be made only when final grade is established or after additions of base rock. Do not move soils 
following Trifluralin 10G application and do not apply Trifluralin 10G to areas where asphalt is to be laid directly on top 
of soil.
Paving should follow Trifluralin 10G applications as soon as possible.
Apply Trifluralin 10G to ensure thorough coverage of the base rock layer. Apply with any granular applicator that will 
apply uniformly.
Apply the following amount of Trifluralin 10G
Amount of Trifluralin 10G
Per Acre Per 1000 sq. ft.

24
120-160 lbs 2.75-3.65 lbs
TREE AND VINE CROPS-CITRUS, FRUIT AND NUT TREES, AND VINEYARDS
New Plantings of Citrus, Fruit and Nut Trees
For new plantings of almond, apricot, grapefruit, lemon, nectarine, orange, peach, pecan, plum, prune, tangelo, 
tangerine and walnut trees, apply and incorporate Trifluralin 10G before transplanting.
Broadcast Rates Per Acre:
Soil Texture Trifluralin 10G
Coarse 5 lbs.
Medium 6.25-7.5 lbs.
Fine 7.5 lbs
• All soils with 2-5% organic matter - 7.5-10 lbs./A
• All soils with 5-10% organic matter - 10lbs./A
• Use lower rate in range in areas receiving less than 20 inches total annual rain fall and irrigation.
New Plantings of Vineyards
Apply and incorporate Trifluralin 10G before planting.
Broadcast Rates Per Acre:
Soil Texture Trifluralin 10G
Coarse 5-7 lbs.
Medium 7.5-15 lbs.
Fine 15-20 lbs.
• All soils with 2-10% organic matter - 15-20 lbs./A
• Use lower rate in rate range in areas receiving less than 20 inches total annual rainfall and irrigation.
Note: Do not use more than 10 lbs./A on mist propagated grape rootings.
Established Non-bearing and Bearing Citrus, Fruit and Nut Trees, and Vineyards
Trifluralin 10G may be applied in established non-bearing and bearing vineyards and plantings of almond, apricot, 
grapefruit, lemon, nectarine, orange, peach, pecan, plum, prune, tangelo, tangerine, and walnut trees. In established 
plantings, apply Trifluralin 10G to the soils surface and incorporate using methods not injurious to the crop. Do not 
apply to vineyards within 60 days of harvest.
Broadcast Rates Per Acre:
Soil Texture Trifluralin 10G
All soils 10-20 lbs
• Use the higher rate in the rate range for longer term weed control.
CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY
BEFORE BUYING OR USING THIS PRODUCT, read the entire Directions for Use and the following Conditions of 
Sale and Limitation of Warranty and Liability. By buying or using this product, the buyer or user accepts the following 
Conditions of Sale and Limitation of Warranty and Liability, which no employee or agent of LOVELAND PRODUCTS, 
INC. or the seller is authorized to vary in any way.
Follow the Directions for Use of this product carefully. It is impossible to eliminate all risks inherently associated with 
the use of this product. Crop or other plant injury, ineffectiveness, or other unintended consequences may result from 
such risks as weather or crop conditions, mixture with other chemicals not specifically identified in this product’s label,
or use of this product contrary to the label instructions, all of which are beyond the control of LOVELAND PRODUCTS,
STORAGE AND DISPOSAL
Do not contaminate water, food, or feed by storage or disposal.
Storage: Store in original container only. In case of spill, contain material and dispose as waste.
Pesticide Disposal: Wastes resulting from the use of this product may be disposed of on site or at an approved 
waste disposal facility.
Container Handling: Nonrefillable container. Do not reuse or refill this container. Completely empty bag into 
application equipment by shaking and tapping sides and bottom to loosen clinging particles. Offer for recycling if 
available or dispose of empty bag in a sanitary landfill or by incineration. Do not burn, unless allowed by state and 
local ordinances.
For help with any spill, leak, fire or exposure involving this material, call day or night CHEMTREC – 1-800-
424-9300

25
INC. and the seller. The buyer or user of this product assumes all such inherent risks.
Subject to the foregoing inherent risks, LOVELAND PRODUCTS, INC. warrants that this product conforms to the 
chemical description on the label and is reasonably fit for the purposes stated in the Directions for Use when the 
product is used in strict accordance with such Directions for Use under normal conditions of use. EXCEPT AS 
WARRANTED IN THIS LABEL AND TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THIS PRODUCT IS 
SOLD “AS IS,” AND LOVELAND PRODUCTS, INC. MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, 
INCLUDING BUT NOT LIMITED TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR 
ELIGIBILITY OF THIS PRODUCT FOR ANY PARTICULAR TRADE USAGE.
IN THE UNLIKELY EVENT THAT BUYER OR USER BELIEVES THAT LOVELAND PRODUCTS, INC. HAS 
BREACHED A WARRANTY CONTAINED IN THIS LABEL AND TO THE EXTENT REQUIRED BY APPLICABLE 
LAW, BUYER OR USER MUST SEND WRITTEN NOTICE OF ITS CLAIM TO THE FOLLOWING ADDRESS: 
LOVELAND PRODUCTS, INC., ATTENTION: LAW DEPARTMENT, P.O. BOX 1286, GREELEY, CO 80632-1286.
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE BUYER’S OR USER’S EXCLUSIVE 
REMEDY FOR ANY INJURY, LOSS, OR DAMAGE RESULTING FROM THE HANDLING OR USE OF THIS 
PRODUCT, INCLUDING BUT NOT LIMITED TO CLAIMS OF BREACH OF WARRANTY OR CONTRACT, 
NEGLIGENCE, STRICT LIABILITY, OR OTHER TORTS, SHALL BE LIMITED TO ONE OF THE FOLLOWING,
AT THE ELECTION OF LOVELAND PRODUCTS, INC. OR THE SELLER: DIRECT DAMAGES NOT
EXCEEDING THE PURCHASE PRICE OF THE PRODUCT OR REPLACEMENT OF THE PRODUCT. TO THE 
EXTENT CONSISTENT WITH APPLICABLE LAW, LOVELAND PRODUCTS, INC. AND THE SELLER SHALL 
NOT BE LIABLE TO THE BUYER OR USER OF THIS PRODUCT FOR ANY CONSEQUENTIAL, SPECIAL, OR
INDIRECT DAMAGES, OR DAMAGES IN THE NATURE OF A PENALTY.
Melroe is a registered trademark of Clark Equipment Company.
FORMULATED FOR LOVELAND PRODUCTS, INC.
P.O. BOX 1286, GREELEY, COLORADO 80632-1286