crop-chem-docs/corpus/epa_ppls/34704-876.md

# METRIBUZIN 75

- EPA Reg No: **34704-876**
- Registrant: LOVELAND PRODUCTS, INC.
- Signal word: Caution
- Active ingredients: Metribuzin (75%)
- Label accepted: 2026-08-03
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/034704-00876-20260803.pdf

---
August 03, 2026
SENT BY EMAIL
Leah Strayer
leah@pyxisrc.com
LOVELAND PRODUCTS, INC.
Subject: Labeling Notification per Pesticide Registration Notice (PRN) 98-10 - Minor Label Revisions
Product Name: METRIBUZIN 75
Admin Number: 34704-876
EPA Receipt Date: 05/20/2026
Action Case Number: 00699527
Dear Leah Strayer:
The U.S. Environmental Protection Agency is in receipt of your application for notification under Pesticide
Registration Notice 98-10 for the above referenced product. The EPA has conducted a review of this request
for its applicability under PRN 98-10 and finds that the action requested falls within the scope of PRN 98-10.
The labeling submitted with this application has been stamped "Notification" and will be placed in our records.
Should you wish to add/retain a reference to your company’s website on your label, then please be aware that
the website becomes labeling under the Federal Insecticide, Fungicide, and Rodenticide Act and is subject to
review by the EPA. If the website is false or misleading, the product will be considered to be misbranded and
sale or distribution of the product is unlawful under FIFRA section 12(a)(1)(E). 40 CFR § 156.10(a)(5) lists
examples of statements the EPA may consider false or misleading. In addition, regardless of whether a
website is referenced on your product’s label, claims made on the website may not substantially differ from
those claims approved through the registration process. Therefore, should the EPA find or if it is brought to
our attention that a website contains statements or claims substantially differing from statements or claims
made in connection with obtaining a FIFRA section 3 registration, the website will be referred to the EPA’s
Office of Enforcement and Compliance Assurance.
If you have questions, please contact Jamie Millard via email at millard.jamie@epa.gov.
Sincerely,
Kable Bo Davis, Senior Advisor 
HB, RD
Office of Pesticide Programs
Kable Bo Davis

METRIBUZIN 75
Dry Flowable Herbicide
For control of certain grasses and broadleaf weeds .
ACTIVE INGREDIENT:
Metribuzin, 4-Amino-6- (1,1-dimethylethyl)-3-(methylthio)-1,2,4-triazin-5 (4H)-one ..........................................................75.00%
OTHER INGREDIENTS: ................................................................... ...................................25.00%
TOTAL 100.00%
Stop - Read the label before use.
KEEP OUT OF REACH OF CHILDREN
CAUTION
See [Below] Inside [This] Label Booklet for [additional] [First Aid][/] [Spanish First Aid][;] [and] [additional] Precautionary 
Statements[;] [and] Directions for Use [(including] [Mitigations for Endangered Species)][,][and] [Storage and Disposal] 
[Instructions)] [;] [and] [Other] [Required Spanish] [Labeling] [and] [Other] [Use Information] [.]
FOR A MEDICAL EMERGENCY OR HELP WITH ANY SPILL, LEAK, FIRE OR EXPOSURE INVOLVING 
THIS MATERIAL, CALL DAY OR NIGHT, CHEMTREC 1-800-424-9300.
FIRST AID
If swallowed: xCall a poison control center or doctor immediately for treatment advice.
xHave person sip a glass of water if able to swallow.
xDo not induce vomiting unless told to do so by a poison control center or doctor.
xDo not give anything by mouth to an unconscious person.
If in eyes: xHold eye open and rinse slowly and gently with water for 15 to 20 minutes.
xRemove contact lenses, if present, after the first 5 minutes, then continue rinsing eye.
xCall a poison control center or doctor for treatment advice.
If on skin or clothing: xTake off contaminated clothing.
xRinse skin immediately with plenty of water for 15 to 20 minutes.
xCall a poison control center or doctor for treatment advice.
FOR A MEDICAL EMERGENCY INVOLVING THIS PRODUCT CALL: 1- 866-944-8565800-424-9300.
Have the product container or label with you when calling a poison control center or doctor, or going for treatment.
Note To Physician: Treat patient symptomatically. Obtain prompt medical aid if poisoning should occur.
Symptoms of Poisoning: The compound does not cause any definite symptoms that w ould be diagnostic. Poisoning is accompanied by breathing
difficulties and sedation.
EPA REG. NO. 34704-876
EPA EST. NO. 70989-AR-001
NET CONTENTS 5.0 LB (2.26 KG)
[EXP 0916NOTIF V1 0826]
34704-876
08/03/2026

2 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
PRECAUTIONARY STATEMENTS 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
CAUTION 
Harmful if swallowed or absorbed through skin. Causes moderate eye irritation. Avoid contact with eyes or clothing. Prolonged o r 
frequently repeated skin contact may cause allergic reactions in some individuals. 
Personal Protective Equipment (PPE): 
Some materials that are chemical-resistant to this product are listed below. 
Applicators and other handlers must wear: 
• Long-sleeved shirt and long pants 
• Waterproof gloves 
• Shoes plus socks 
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot 
water. Keep and wash PPE separately from other laundry. 
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker 
Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d)(4-6)], the handler PPE requirements may be reduced or 
modified as specified in the WPS.
 
 
USER SAFETY RECOMMENDATIONS 
Users should: 
• Wash hands thoroughly after handling and before eating, drinking, chewing gum, using tobacco or using the toilet. 
• Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. 
• Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, 
wash thoroughly and change into clean clothing. 
 
ENVIRONMENTAL HAZARDS 
For terrestrial uses, do not apply directly to water, or to area s where surface water is present or to intertidal areas below t he mean 
high water mark. Do not apply when weather conditions favor drift from areas treated. Do not contaminate water when disposing o f 
equipment washwaters or rinsate. 
Groundwater Advisory: Metribuzin is a chemical which can travel (seep or leach) through soil and can contaminate groundwater 
which may be used as drinking water. Metribuzin has been found in groundwater as a result of agricultural use. Users are advise d 
not to apply metribuzin where the water table (groundwater) is cl ose to the surface, and where the soils are very permeable, i. e., 
well-drained soils such as loamy sands. Your local agricultural agencies can provide further information on the type of soil in your 
area and the location of groundwater. 
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected 
handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible 
for pesticide regulation.

3 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This Standard contains 
requirements for the protections of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricul tural 
pesticides. It contains requirements for training, decontaminat ion, notification and emergency assistance. It also contains specific 
instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and restricted- entry 
interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. 
Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours. 
Exception: If the product is soil-injected or soil- incorporated, the Worker Protection Standard, under certain circumstances, allows 
workers to enter the treated area if there will be no contact with anything that has been treated. PPE required for early entry to treated 
areas that is permitted under the Worker Protections Standard and that involves contact with anything that has been treated, such as 
plants, soil, or water, is: 
• Coveralls 
• Waterproof gloves 
• Shoes plus socks 
PRODUCT INFORMATION 
Mixing: It is the pesticide user’s responsibility to ensure that all products in the listed mixtures are registered for the intended us e. 
Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture. Whe n 
using this product, make sure the sprayer is completely clean, fr ee of rust or corrosion which occurs from winter storage. Exam ine 
strainers and screens to be sure the sprayer is clean from previously used pesticides. 
Keep any tank mix containing this product agitated and sprayed out immediately. Do not allow tank mixes to stand for prolonged 
periods of time.
 
The proper mixing procedure for Metribuzin 75 alone or in tank mix combinations with other herbicides is: 
1. Fill the spray tank 1/4 to 1/3 full with clean water. 
2. Add specified rate of this product while recirculating and with agitator running. 
3. Follow the triple rinse procedure described under “Storage And Disposal” to insure that all product is removed from the contain er. 
4. Mix thoroughly and add clean water to fill spray tank to desired level. 
5. Add the other herbicide to tank last and agitate thoroughly. 
6. Continue agitation during application and until sprayer tank is empty. 
Soil Texture: As used on this label, “coarse soils” are loamy sand or sandy loam soils. “Medium soils” are loam, silt loam, sil t, sandy 
clay, or sandy clay loam. “Fine soils” are silty clay, silty clay loam, clay, or clay loam. Silty clay loam soils are transitio nal soils and 
may be classified as medium textured soils in some regions of the U.S. 
PRODUCT RESTRICTIONS 
x Do not rotate any crop not listed on this label for 18 months following application. 
x Do not allow sprays to drift on to adjacent desirable plants. 
x Do not use on other crops grown for food or forage. 
x For all uses: Low-pressure, high-volume hand-wand equipment is prohibited. 
CHEMIGATION 
This product may be used for application through sprinkler irrigation equipment to potatoes, soybeans, tomatoes, and asparagus as 
directed on this label. Refer to the crop sections of this l abel for rates, weeds controlled or suppressed, restrictions and sp ecial 
precautions. 
Apply this product only through sprinkler (including center pivot, lateral move, or solid set) irrigation systems. Do not apply this 
product through any other type of irrigation system. 
Crop injury, lack of effectiveness, or illegal pesticide residues in the crop can result from nonuniform distribution of treated water. 
Calibration: (Center Pivot and Self-Propelled Lateral Move Systems): Sprinkler irrigation systems must be accurately calibrated 
for application of this product. Greater accuracy in calibration (and distribution) will be achieved by injecting a larger volume of a more 
dilute mixture of product and water per hour. Follow the step s below to calibrate center pivot and lateral move systems: 
1. Determine number of minutes required to make 1 complete re volution while applying 1/4 to 3/4 inch of water per acre.

4 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
2. With the system at operating pressure determine the exact nu mber of minutes required to inject 1.0 gallon of water. 
3. Divide the time required for 1 revolution (step 1) by the time required to inject 1.0 gallon (step 2). This gives total gallons 
of product-water mixture to be added to nurse tank. 
4. Add required amount of water to nurse tank and start the agit ation system. Then add this product at the appropriate rate 
(see Broadcast Applications) to the nurse tank. 
 
Example: If 20 hours (1200 minutes) were required for 1 revolution and if 2 minutes were required to inject 1.0 gallon, then a total 
of 600 gallons of product-water mixture are required (1200/2=600) ; to treat 135 acres at 0.6 pound per acre, 90.5 pounds of thi s 
product are required. 
If you have questions about calibration, contact State Extension Service Specialists, equipment manufacturers or other experts. 
Do not connect an irrigation system (including greenhouse systems) used for pesticide application to a public water system unle ss 
the pesticide label-prescribed safety devices for public water systems are in place. 
A person knowledgeable of the chemigation system and responsible for its operation, or under the supervision of the responsible 
person, shall shut the system down and make necessary adjustments should the need arise. 
The system must contain a functional check valve, vacuum relief valve, and low pressure drain appropriately located on the irrigation 
pipeline to prevent water source contamination from backflow. 
The pesticide injection pipeline must contain a functional, automatic, quick-closing check valve to prevent the flow of fluid b ack 
toward the injection pump. 
 
The pesticide injection pipeline must also contain a functional, normally closed, solenoid-operated valve located on the intake side of 
the injection pump and connected to the system interlock to prevent fluid from being withdrawn from the supply tank when the 
irrigation system is either automatically or manually shut down.
 
The system must contain functional interlocking controls to au tomatically shut off the pesticide injection pump when the water pump 
motor stops. 
The irrigation line or water pump must include a functional pressure switch which will stop the water pump motor when the water 
pressure decreases to the point where pesticide distribution is adversely affected. 
Systems must use a metering pump, such as a positive displacement injection pump (e.g., diaphragm pump) effectively designed 
and constructed of materials that are compatible with pesticides and capable of being fitted with a system interlock.
 
Do not apply when wind speed favors drift beyond the area intended for treatment. 
Maintain continuous agitation in the injection nurse tanks during the herbicide application, sufficient to keep herbicide in su spension. 
Apply specified dosage in 1/4 to 3/4 inch of water (1/4 to 1/2 inch of water on sandy soils) per acre as a continuous injection in center 
pivot and lateral move systems or in the last 15 to 30 minutes of set in permanent solid set sprinkler systems. Application of more 
than the quantity of irrigation water listed on this label may result in decreased product performance by removing the chemical from 
the zone of effectiveness. Where sprinkler distribution patterns do not overlap sufficiently unacceptable weed control may resu lt. 
Where sprinkler distribution patterns overlap excessively, crop injury may result. Allow sufficient time for pesticide to be flushed 
through all lines and all nozzles before turning off irrigation water. To ensure that lines are flushed and free of remaining pesticide, 
an indicator dye may be injected into the lines to mark the end of the application period. 
Use a minimum of 1 part water to 1 part herbicide for injection. The use of a larger volume of water will insure greater accura cy and 
more uniform distribution. 
Aerial Drift Reduction Advisory Information 
Avoiding spray drift at the application site is the responsibility of the applicator. The interaction of many equipment- and we ather-
related factors determine the potential for spray drift. The applicator and the grower are responsible for considering all these factor s when 
making decisions. 
The following drift management requirements must be followed to avoid off-target drift movement from aerial applications to 
agricultural field crops. These requirements do not apply to forestry applications, public health uses or to applications using dry

5 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
formulations. 
1. The distance of the outer most nozzles on the boom must not exceed 3/4 the length of the wingspan or rotor. 
2. Nozzles must always point backward parallel with the air stream and never be pointed downwards more than 45 degrees. 
3. Where states have more stringent regulations, they should be observed. 
4. The applicator should be familiar with and take into account the information covered in the Aerial Drift Reduction 
Advisory Information. 
Information on Droplet Size: The most effective way to reduce drift potential is to apply large droplets. The best drift management 
strategy is to apply the largest droplets that provide sufficient coverage and control. Applying larger droplets reduces drift potential, 
but will not prevent drift if applications are made improperly, or under unfavorable environmental conditions (see Wind, Temper ature 
and Humidity and Temperature Inversions). 
 
Controlling Droplet Size 
x Volume - Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with higher rated flows produce 
larger droplets. 
x Pressure - Do not exceed the nozzle manufacturer’s specified pressures. For many nozzle types lower pressure produces 
larger droplets. When higher flow rates are needed, use higher flow rate nozzles instead of increasing pressure. 
x Number of nozzles - Use the minimum number of nozzles that provide uniform coverage. 
x Nozzle orientation - Orienting nozzles so that the spray is released parallel to the airstream produces larger droplets than 
other orientations and is the recommended practice. Significant deflection from horizontal will reduce droplet size and 
increase drift potential. 
x Nozzle type - use a nozzle type that is designed for the intended application. With most nozzle types, narrower spray angles 
produce larger droplets. Consider using low-drift nozzles. Soli d stream nozzles oriented straight back produce the largest 
droplets and the lowest drift. 
Boom Length: For some use patterns, reducing the effective boom length to less than 3/4 of the wingspan or rotor length may 
further reduce drift without reducing swath width. 
Application Height: Applications should not be made at a height greater than 10 feet above the top of the largest plants unless a 
greater height is required for aircraft safety. Making applications at the lowest height that is safe reduces exposure of dropl ets to 
evaporation and wind. 
Swath Adjustment: When applications are made with a crosswind, the swath will be displaced downwind. Therefore, on the up and 
downwind edges of the field, the applicator must compensate for this displacement by adjusting the path of the aircraft upwind. 
Swath adjustment distance should increase with increa sing drift potential (higher wind, smaller drops, etc.). 
Wind: Drift potential is lowest between wind speeds of 2 to 10 mph. However, many factors, including droplet size and equipment 
type determine drift potential at any given speed. Application should be avoided below 2 mph due to variable wind directions an d 
high inversion potential. Note: Local terrain can influence wind patterns. Every applicator should be familiar with local wind patterns 
and how they affect spray drift. 
Temperature and Humidity: When making applications in low relative humidity, set up equipment to produce larger droplets to 
compensate for evaporation. Droplet evaporation is most severe when conditions are both hot and dry. 
Temperature Inversions: Applications should not occur during a temperature inversion because drift potential is high. Temperature 
inversions restrict vertical air mixing, which causes small, suspended droplets to remain in a concentrated cloud. This cloud can move 
in unpredictable directions due to the light variable winds common during inversions. Temperature inversions are characterized by 
increasing temperatures with altitude and are common on nights with limited cloud cover and light to no wind. They begin to for m as 
the sun sets and often continue into the morning. Their presence can be indicated by ground fog; however, if fog is not present , 
inversions can also be identified by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers 
and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward a nd 
rapidly dissipates indicates good vertical air mixing. 
Sensitive Areas: This product should only be applied when the potential for drift to adjacent sensitive areas (e.g. residential areas, bodies 
of water, known habitat for threatened or endangered species, no n-target crops) is minimal (e.g. when wind is blowing away from 
the sensitive areas).

6 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Application of This Product with Herbicide Spray Equipment 
Use a standard low-pressure (20 to 40 psi) herbicide boom sprayer equipped with suitable nozzles and screens no finer than 50-mesh in 
nozzle and in-line strainers. Agitate thoroughly before and during application with bypass agitation. 
Low pressure and high volume hand wand equipment is prohibited. 
Ground Application: Apply the proper rate of this product in a minimum of 10.0 to 40.0 gallons of spray mixture per acre broadcast. 
Banded Application: Use proportionally less of this product per acre in a band versus a broadcast application. For band application use 
0.25 to 1.0 gallon of spray mix per inch of band width regardless of row spacing. 
Examples: (1) To treat a 15-inch band on rows 30 inches apart, use 1/2 of the broadcast rate of this product. (2) To treat a 14-inch 
band on rows 42 inches apart, use 1/3 of the broadcast rate of this product. 
Aerial Application: Where permitted, apply specified rate in a minimum of 2.0 to 10.0 gallons of spray mixture per acre. Do not apply 
aerially when wind speed is greater than 10 mph. 
Note: Do not apply aerially when this product is tank mixed with Intrro®. 
 
For All Applications of Metribuzin 75: Sprayer must be accurately calibrated before applying this product. Check sprayer during 
application to be sure it is working properly and delivering a uniform spray pattern. As the volume of spray mixture decreases per 
acre, the importance of accurate calibration and uniform application increases. Avoid over application, misapplication, and boom and 
spray swath overlapping that will increase spray dosage. (Crop injury may occur as a result.) Avoid spray skips and gaps which allow 
weeds to grow in untreated soil. Do not apply when weather conditions favor spray drift and/or when sensitive or cool season cr ops, 
such as cole crops, onions, peas, or strawberries are present in adjacent fields or in areas where wheat is growing in coarse textured 
soils. 
Sprayer Cleanup: Spray equipment must be thoroughly cleaned to remove remaining traces of herbicide that might injure other crops 
to be sprayed. Drain any remaining spray solution of this produc t from the spray tank and dispose of according to label disposa l 
instructions. Rinse the spray tank and refill with water, adding a heavy-duty detergent at the rate of 1 cup per 20.0 gallons o f water. 
Recycle this mixture through the equipment for 5 minutes and spray out. Repeat this procedure twice. Fill the spray tank with c lean 
water, recycle for 5 minutes, and spray out. Clean pump and nozzle screens thoroughly. Wash away any spray mixture from the 
outside of spray tank, nozzles or spray rig. All rinse water must be disposed of in compliance with local, state, and Federal guidelines. 
Application of Metribuzin 75 in Fluid Fertilizers 
This product may be applied in fluid fertilizer solutions to alfalfa and soybeans by following the appropriate mixing procedure s and 
compatibility check. When using tank mix combinations, be sure all components are compatible. 
Make compatibility checks of this product and tank mix combinations which include this product for each batch of fluid fertiliz er 
because of the variability of these fertilizers. 
Compatibility Check: 
1. Pre-mix 2.0 teaspoonfuls of this product with 8.0 teaspoonfuls of water (1:4 ratio) in a quart jar by adding the water first an d 
follow with this product. Mix thoroughly. If a second herbicide is to be used, double the amount of water (1:8 ratio) and add t he 
second herbicide after mixing this product first. 
2. Then pour 1.0 pint of fluid fertilizer into the quart jar and shake well. 
3. Allow to stand for 5 minutes. 
ONLY USE THIS COMPATIBILITY CHECK WHEN MIXING WITH FLUID FERTILIZERS. 
Interpretation of Results: If the solution in the jar appears to be uniform, without signs of agglomeration, or without a separ ation of 
an oily film on top of the fertilizer, the mixture may be used . If not, repeat the compatibility check using twice the amount o f water or 
add a compatibility agent to the water. If separation occurs, but the mixture can be resuspended by shaking, then application i s 
possible with good agitation in the spray tank. 
Tank Mixing Guidelines: 
1. Add the required amount of water and compatibility agent (if re quired) to the tank. Start agitation system while adding this 
product and follow by adding the fluid fertilizer and agitate. 
2. If a second herbicide is to be used, follow as above in 1, but use twice the amount of water. Start agitation, add Metribuzin 7 5

7 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
and follow by adding the second herbicide, and then continue filling the tank with fluid fertilizer. 
3. Maintain continuous agitation to assure uniform spray mixture until the tank is emptied. 
Commercial Impregnation and Application of Metribuzin 75 on Dry Bulk Fertilizer 
Dry bulk fertilizer may be impregnated or coated with this product for application to established alfalfa and to soybeans. All directions, 
cautions, and special precautions on this label must be followed along with state regulations relating to dry bulk fertilizer b lending, 
impregnating and labeling. 
Impregnation: To impregnate, use a system consisting of a belt, conveyor , or closed drum which is used for dry bulk fertilizer 
blending. Any commonly used fertilizer can be impregnated with this product except ammonium nitrate, or fertilizers containing 
ammonium nitrate, potassium nitrate, or sodium nitrate. Do not use on powder limestone. 
Apply using a minimum of 200 pounds dry bulk fertilizer per acre and up to a maximum of 450 pounds per acre. To impregnate or 
coat dry bulk fertilizer, mix this product with sufficient water to form a sprayable slurry. The delivery nozzles must be direc ted to 
deliver a fine spray toward the fertilizer for thorough coverage while avoiding spray contact with mixing equipment. Uniform 
impregnation of this product to dry bulk fertilizer will vary and if the absorptivity is not adequate, an absorptive powder may be added 
to produce a dry, free-flowing mixture. Micro-Cel® E is the recommended absorbent powder. When another herbicide is used with 
this product, mix and impregnate immediately. 
Apply immediately after impregnation unless experience has shown that impregnated fertilizer can be stored without becoming lumpy 
and difficult to spread. 
 
Rates: Select the specified rate of this product per acre from the appropriate section of this label and refer to the formula below t o 
determine the amount of this product which is to be impregnated on a ton of dry bulk fertilizer based on the amount of fertilizer which 
will be distributed on 1 acre. 
 
Lb Metribuzin 75 x 2000 Lb Fertilizer = Lb Metribuzin 75 
Acre Acre Ton of Fertilizer 
 
Application: Uniform application is essential for satisfactory weed control. Accurate calibration of fertilizer application equipment is 
essential for uniform distribution to the soil surface. Apply 1/2 the specified rate and overlap 50% or double apply by splitti ng the 
middles to obtain the best distribution pattern. 
If fertilizer materials are excessively dusty, use diesel oil or other suitable additive to reduce dust prior to impregnation, as dusty 
fertilizer will result in poor distribution during application. Crop injury and/or poor weed control may occur where the impreg nated 
fertilizer is not uniformly applied. 
Incorporation and Combination Uses: When this product is to be used in combination with another herbicide, follow directions on 
this label for combinations, rates, crops, incorporation, and special precautions. 
SOYBEANS 
(Except California) 
Metribuzin 75 tank mix combinations may be used for preplant incorporated applications, preemergence surface applications, Spli t-
Shot application, and Extended Split-Shot application. This product may also be used as an overlay application following a preplant 
incorporated application of a grass herbicide registered for this same use and alone as a pre-emergence surface application. Al l 
these applications can be applied with ground equipment, and some can be applied with aerial spray equipment. In addition, this 
product can be applied as a postemergence directed spray to soybeans in certain states. 
Restrictions (Soybeans): 
x Grazing and Feeding Treated Vines: Treated vines may be grazed or fed to livestock 40 days after application when this 
product is applied alone or with Trifluralin HF, Dual, Stealth®, or Intrro®. 
x Do not use treated vines for feed or forage when this product is applied with Sonalan®, Linuron plus Intrro, or Linuron plus Du al. 
Precautions (Soybeans): Injury to soybeans may occur when this product is used under the following conditions: 
• When soils have a calcareous surface area or a pH of 7.5 or higher. 
• Due to the sensitivity of certain soybean varieties, this produc t is not recommended for use on Altona, AP 55, AP 71, Asgrow 65 20, 
Burlison, Coker 102, Coker 156, Dassel, GL 3202, Govan, Maple Amber, NB 3665, NKS 1884, Paloma 350, Portage, Regal, Semmes, 
Terra-Vig 505, Terra-Vig 606, Tracy, Vansoy, and Vinton 81. Consult your Loveland Products, Inc. representative or your seed 
supplier for more information on the tolerance to Metribuzin 75 of newly released soybean varieties, prior to use of this produ ct.

8 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
• When applied in conjunction with soil-applied organic phosphate pesticides. 
• Over application or boom overlapping may result in stand loss and soil residues. 
• Uneven application or improper incorporation can decrease the level of weed control and/or increase the level of injury. 
• When applied to any soil with less than 0.5% organic matter. 
• Soil incorporation deeper than recommended. 
• When sprayers are not calibrated accurately. 
• When heavy rains occur soon after application, especially in poorly drained areas where water may stand for several days. 
• When soybeans are planted less than 1-1/2 inches deep, particularly in preemergence application. 
Activation: A minimum amount of soil moisture is required to activate this product. In areas of low rainfall, preemergence applications 
to dry soil should be followed with light irrigation of 1/4 acre-inch of water. Do not apply heavy irrigation immediately after application. 
As with many surface-applied herbicides, weed control and crop tolerance may vary with rainfall and/or soil texture. 
Rate Ranges: Where a rate range is shown, use a lower rate on soils that are coarse-textured or low in organic matter. Use a higher 
rate on soils that are relatively fine -textured or high in organic matter. 
Replanting: If replanting is necessary in fields treated with this product as directed on this label, the field may be replanted to 
soybeans. When replanting use a minimum of tillage. Do not apply a second treatment as injury to soybeans may occur. 
 
WEEDS CONTROLLED BY METRIBUZIN 75 AND METRIBUZIN 75 HERBICIDE TANK-MIX COMBINATIONS 
C = Control S = Suppression or Erratic Control P = Poor or No Control 0 = No information (Control may range from 
poor to excellent) 
1 = Metribuzin 75 Alone 
2 = Metribuzin 75 Split -Shot 
3 = Metribuzin 75 plus Trifluralin HF 
4 = Metribuzin 76 plus Dual 
5 = Metribuzin 75 plus Stealth 
6 = Metribuzin plus Intrro 
7 = Extended Split-Shot 
8 = Metribuzin 75 plus Sonalan 
9 = Metribuzin 75 plus Linuron plus (Intrro or 
Dual) 
Annual Broadleaf Weeds 1 2 3 4 5 6 7 8 9 
Black nightshade (Solanum nigrum) P P P C P C C P S 
Bristly starbur (Acanthospermum hispidum) C C C C C C C C C 
Buffalobur (Solanum rostratum) C C P P P P C P 0 
Carpetweed (Mollugo verticillata) C C C C C C C C C 
Cocklebur (Xanthium pensylvanicum) S C S S S S C S S 
Copperleaf, Hophornbeam (Acalypha ostryaefolia) C C C C C C C C C 
Florida beggarweed (Desmodium tortuosum) C C C C C C C C C 
Florida pusley (Richardia scabra) C C C C C C C C C 
Galinsoga (Galinsoga spp.) C C C C C C C C C 
Horseweed marestail (Conyza canadensis) 0 0 0 0 0 0 C 0 0 
Jimsonweed (Datura stramonium) C C C C C C C C S 
Knotweed (Polygonum spp.) C C C C C C C C C 
Kochia (Kochia scoparia) C C C C C C C C C 
Lambsquarters (Chenopodium spp.) C C C C C C C C C 
Morningglory, ivyleaf (Ipomoea hederacea) P P S P P P P P P 
Morningglory, pitted (Ipomoea lacunosa) P P S P P P P P P 
Morningglory, smallflower (Jacquemontia tamnifolia) P P C P P P P P P 
Morningglory, tall (Ipomoea purpurea) P P S P P P P P P 
Pigweeds (Amaranthus spp.) C C C C C C C C C 
Prickly sida/teaweed (Sida spinosa) C C C C C C C C C 
Purslane (Portulaca oleracea) C C C C C C C C C 
Ragweed, common (Ambrosia artemisiifolia) C C C C C C C C C 
Redweed (Melochia corchorifolia) C C C C C C C C C 
Russian thistle (Salsola kali) C C C C C C C C C 
Sesbania (Sesbania spp.) C C C C C C C C C 
Shepherd’s-purse (Capsella bursa-pastoris) C C C C C C C C C 
Sicklepod (Cassia obtusifolia) C C S C S C C S S 
Smartweeds (Polygonum spp.) C C C C C C C C S

9 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Spotted spurge (Euphorbia maculate) C C P C P C C P 0 
Spurred anoda (Anoda cristata) C C C C C C C C 0 
Sunflower (Helianthus spp.) C C S S S S C S P 
Velvetleaf (Abutilon theophrasti) C C C C C C C C C 
Venice mallow (Hibiscus trionum) C C C C C C C C C 
Wild mustards (Brassica spp.) C C C C C C C C C 
Annual Grasses 1 2 3 4 5 6 7 8 9 
Barnyardgrass (Echinochloa crus-galli) S C C C C C C C C 
Bluegrass (Poa annua) C C C C C C C C C 
Broadleaf signalgrass (Brachiaria platyphylla) C C C C C C C C 0 
Browntop millet (Panicum ramosum) C C C P C S C 0 0 
Crabgrass (Digitaria spp.) C C C C C C C C C 
Crowfootgrass (Dactyloctenium aegyptium) C C C C C C C 0 0 
Cupgrass (Eriochloa gracilis) P C P P P P C 0 0 
Foxtails (Setaria spp.) S C C C C C C C C 
Goosegrass (Eleusine indica) C C C C C C C C C 
Johnsongrass, Seedling (Sorghum halepense) C C C C C C C C 0 
Junglerice (Echinochloa colonum) C C C C C C C C 0 
Nutsedge, yellow (Cyperus esculentus) P P P C P C C P 0 
Panicum, fall (Panicum dichotomiflorum) P C C C C C C C C 
Panicum, Texas (Panicum, texanum) P C C P C S S C 0 
Red rice (Oryza sativa) P C C C P C C 0 0 
Sandbur (Cenchrus spp.) P C C P C S S 0 0 
Shattercane (Sorghum bicolor) P C C P P P P C 0 
Sorghum, volunteer (Sorghum spp.) P C C P P P P 0 P 
Sprangletop (Leptochloa spp.) P C C P P P P 0 P 
WEEDS CONTROLLED BY METRIBUZIN 75 AND METRIBUZIN 75 HERBICIDE TANK-MIX COMBINATIONS 
C = Control S = Suppression or Erratic Control P = Poor or No Control 0 = No information (Control may range from 
poor to excellent) 
1 = Metribuzin 75 Alone 
2 = Metribuzin 75 Split-Shot 
3 = Metribuzin 75 plus Trifluralin HF 
4 = Metribuzin 75 plus Dual 
5 = Metribuzin 75 plus Stealth 
6 = Metribuzin 75 plus Intrro 
7 = Extended Split-Shot 
8 = Metribuzin 75 plus Sonalan 
9 = Metribuzin 75 plus Linuron plus (Intrro or Dual) 
Annual Grasses 1 2 3 4 5 6 7 8 9 
Stinkgrass (Eragrostis spp.) P C C P P P P 0 P 
Wheat, volunteer (Triticum spp.) P P P P P P P 0 P 
Witchgrass (Panicum capillare) P C C C C C C C 0 
Metribuzin 75 Alone 
Metribuzin 75 (Alone) Preemergence Application: The following rates of this product may be applied preemergence to soybeans through 
center pivot or lateral move sprinkler irrigation systems that apply water in a uniform manner. Refer to “Chemigation” section of this label for 
directions. 
This product can be applied broadcast or banded. This application may be made during planting or as a separate operation after planting 
but before crop emergence. See the “Product Information” section in the front of this label. 
Do not apply to sand soils, or to sandy loam or loamy sand soils containing less than 2% organic matter. Do not incorporate int o soil or apply 
more than once per season. 
 
Pounds of Metribuzin 75/A 
Organic Matter 
Soil Texture 
Coarse Soils (Sandy 
loam, loamy sand) 
Less than 2% 
 
DO NOT USE3 
2 to 4% 
 
0.5 
Over 4% 
 
0.6

10 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Medium Soils1 (Loam, 
silt loam, silt, sandy 
clay, sandy clay loam) 
 
 
0.5 to 0.6 
 
 
0.6 to 0.83 
 
 
0.83 to 1.0 
Fine Soils1 (Silty clay, 
silty clay loam2, clay, 
clay loam) 
 
 
0.6 to 0.83 
 
 
0.83 to 1.0 
 
 
1.0 to 1.16 
Mississippi Delta Only 1.0 1.16 1.3 
1 For control of Lambsquarters, Redroot pigweed and Wild mustard, and for suppression of Green, Yellow and Giant foxtails on alka line 
(calcareous) soils in Nebraska, Minnesota, South Dakota and North Dakota only, apply this product at rates of 0.3 pound per acr e on 
medium soils and 0.3 to 0.5 pound per acre on fine soils regardless of soil organic matter percentage (use 0.5 pound only where soil pH 
is less than 7.5 and weed pressure is heavy). The 0.3 pound per acre rate of this product alone can be applied regardless of so il pH. For 
control of other weeds listed on this label use this product at full rates specified in the table above, but note that crop inj ury may occur on 
soils having a calcareous surface area or a pH of 7.5 or higher. 
2 Silty clay loam soils are transitional soils and may be classified as medium textured soils in some regions of the U.S. 
3 Refer to the appropriate section of this label for use of this product on soybeans in coarse soils with 0.5% or more organic m atter in certain 
states. 
Uses of Metribuzin 75 in Combination with Other Herbicides 
Sequential Application of Scepter® Following Metribuzin 75 
If needed, application of this product alone or in a registered tank mix according to directions on this label, may be followed by an early 
postemergence application of Scepter herbicide (1.5 pound per gallon liquid or Scepter 70 DG) for control of Cocklebur. Apply 0 .16 to 
0.3 pint of Scepter (0.7 to 1.4 ounces of Scepter 70 DG) in a minimum of 20.0 gallons of water per acre. Use 0.16 pint of Scept er (0.7 ounce 
of Scepter 70 DG) if Cockleburs are less than 3 inches tall or have fewer than 3 leaves and are actively growing. For Cocklebur s less than 
6 inches tall and actively growing use 0.3 pint of Scepter (1.4 ounces of Scepter 70 DG) per acre. Do not use Scepter when soyb eans or 
Cockleburs have been subjected to stress conditions such as temperature or moisture extremes. Do not exceed a total of 0.6 pint of Scepter 
(2.8 ounces of Scepter 70 DG) per acre in 1 season. Wait at least 10 days after application of Scepter before cultivating. 
When preparing the spray mixture with Scepter, add 2.0 pints of nonionic surfactant approved for use on growing crops and conta ining at 
least 80% active ingredient per 100 gallons of mixture. Apply crop oil concentrate (COC) at the rate specified on the COC label . 
Use Scepter only in the states where it is registered as listed on the product label. 
Apply Scepter at least 90 days before harvest of soybeans. Do not graze or feed soybean forage, hay, or straw to livestock. 
Refer to the Scepter label for additional cautions and precautions, directions, limitations, and information on environmental h azards and 
planting of rotational crops. 
Split-Shot Application 
A preplant incorporated application of this product tank mixed with either Trifluralin HF, Intrro, Dual Magnum®, Stealth or Son alan and 
followed by a preemergence surface application of this product alone after planting but prior to soybean emergence, will contro l more 
broadleaf and grass weeds in soybeans than when either herbicide is used alone. 
Refer to the Trifluralin HF, Intrro, Dual Magnum, Stealth or Sonalan labels, and to appropriate sections of this label for dire ctions on soil 
preparation, herbicide application, incorporation techniques, herbicide rates, weed species controlled, and restrictions for us ing tank mix 
combinations of this product. Carefully observe the “Special Precautions” section concerning the use of this product in tank mix combinations 
on soybeans. 
When a Split-Shot application of this product with Stealth, Trifluralin HF, or Sonalan is used, the preplant incorporated tank mix may be 
applied up to 21 days prior to planting soybeans; with Dual Magnum or Intrro, the preplant incorporated tank mix may be applied up to 14 
days prior to planting. 
On medium and fine textured soils with greater than 2% organic matter, a rate range is provided for the preemergence overlay ap plication 
of this product. Use the higher rate (a) in fields with a history of severe broadleaf weed pressure, (b) when the time between preplant 
incorporated tank mix and preemergence overlay applications approaches the maximum stated above, and/or (c) when the organic ma tter 
content of the soil is at the upper end of the indicated range. 
For Black nightshade control, refer to the appropriate sections of the Intrro, Dual Magnum or Sonalan labels for specific instr uctions.

11 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
SPLIT-SHOT APPLICATION 
Preplant Incorporated Tank-Mix Application - Followed By - Preemergence Overlay Application 
 
Soil Texture1 
 
Rate of Combination 
Product/A 
 
Plus 
Rate of 
Metribuzin in 75 
Lb/A 
Rate of Metribuzin 75 Lb/A Organic Matter 
Less than 
2.0% 2.0% to 4.0% Over 4.0% 
Coarse (Light) 
sand, loamy sand, 
sandy loam 
Trifluralin HF 1.0 pt 
OR Intrro 2.0 to 2.5 qt 
OR Dual Magnum 0.83 to 1.0 pt 
OR Stealth 1.5 pt 
OR Sonalan 1.25 to 2.0 pt 
plus 0.3 - Followed By 0.16 0.16 0.16 to 0.3 
Medium loam, 
silt loam, sandy clay loam, 
silt, sandy clay 
Trifluralin HF 1.5 pt 
OR Intrro 2.5 to 3.0 qt 
OR Dual Magnum 1.0 pt 
OR Stealth 1.5 pt 
OR Sonalan 1.75 to 2.5 pt 
plus 0.5 - Followed By 
or 
0.3 2 - Followed By 
0.16 
0.3 
0.16 to 0.3 
0.3 to 0.5 
0.3 to 0.5 
(0.5 to 0.6) 3 
Fine (Heavy) 
silty clay loam*, clay loam, 
silty clay, clay 
Trifluralin HF 2.0 pt 
OR Intrro 2.5 to 3.0 qt 
OR Dual Magnum 1.3 to 1.6 pt 
OR Stealth 1.5 to 2.0 pt 
OR Sonalan 2.25 to 3.0 pt 
plus 0.6 - Followed By 
0.5 2 - Followed By 
0.16 
or 
0.3 
0.16 to 0.3 
0.3 to 0.5 
0.3 to 0.5 
(0.5 to 0.6) 3 
*Silty clay loam soils are transitional soils and may be classified as medium textured soils in some regions of the U.S. 
1 On coarse textured soils, do not use on sand soils with less than 1% organic matter, or on loamy sand or sandy loam soils with less 
than 0.5% organic matter. However, on coarse textured soils with calcareous surface area or a pH of 7.5 or higher, do not use on 
sand soils with less than 2% organic matter, or on loamy soils with less than 1% organic matter. 
2 Use this lower rate of this product in the preplant incorporated tank mix on soils having a calcareous surface area or a pH of 7.5 or 
higher, and in those situations where soils within a field vary extremely in texture or organic matter content. 
3 Reduce this preemergence overlay rate of this product by 0.16 pound per acre when using Split-Shot application on soils with over 4% 
organic matter and which have a calcareous surface area or a pH of 7.5 or higher. 
Extended Split-Shot Application 
(Includes No-till, Reduced-till, Ridge-till, Strip-till, Mulch-till) 
An early preplant (surface-applied or shallow incorporated) application of this product tank mixed with either Dual Magnum or I ntrro, followed 
by a preemergence surface application of this product tank mixed with Dual Magnum or Intrro after planting but prior to soybean emergence, 
will control more broadleaf and grass weeds in soybeans than either herbicide used alone. 
An Extended Split-Shot application will decrease the need for tillage and/or contact herbicides for the control of existing veg etation prior to 
planting, while providing residual control of weeds after planting. 
When an Extended Split-Shot application of this product with Dual Magnum or Intrro is used, the preplant tank mix combination m ay be 
applied 15 to 30 days prior to planting soybeans. Follow directions on the label accompanying the product for Split-Shot applic ations from 0 
to 14 days before planting. 
Where a rate range is specified, use the higher rate (a) in fields with a history of severe weed pressure, (b) when the time be tween early 
preplant tank mix and preemergence overlay applications approaches the maximum 30 days, (c) when the organic matter content of the soil 
is at the upper end of the indicated range, (d) when heavy crop residues are present on the soil surface, and/or (e) when the e arly preplant 
tank mix application is shallow incorporated (e.g. use 2.0 to 2.5 quarts Intrro in the early preplant tank mix when surface app lied and use 
2.5 to 3.0 quarts Intrro when the tank mix is to be lightly incorporated). 
When weeds exceed 1 to 1-1/2 inches in height or diameter at application, use a contact herbicide, such as glyphosate (Makaze®) or 
Gramoxone Inteon™. 
Refer to the Dual Magnum or Intrro label, and to appropriate sections of this label for additional information on soil preparat ion, herbicide 
application, weeds controlled, precautions, restrictions, limitations and sprayer clean up.

12 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
EXTENDED SPLIT-SHOT APPLICATION 
Early Preplant Tank Mix Application 
(Surface-Applied or Shallow Incorporated) 
 
 
 
 
 
Followed By 
Preemergence Overlay Application 
 
 
 
Soil Texture1 
 
 
Rate of Combination 
Product/A 
 
 
 
Plus 
 
Rate of 
Metribuzin 
75 Lb/A 
 
Rate of 
Combination 
Product/A 
 
 
 
Plus 
Rate of Metribuzin 75 Lb/A 
Organic Matter 
Less 
than 
2.0% 
2.0% to 
4.0% 
 
Over 4.0% 
Coarse (Light) 
sand, loamy sand, 
sandy loam 
Dual Magnum 0.88 pt 
or 
Intrro 1.5 to 2.0 qt 
plus 0.3 to 0.5 Dual Magnum 
or 
Intrro 
0.44 pt 
1.5 qt 
plus 0.16 0.16 to 
0.3 
0.3 
Medium loam, silt 
loam, sandy clay 
loam, silt, sandy clay 
Dual Magnum 1.16 pt 
or 
Intrro 2.0 to 3.0 qt 
plus 0.5 to 0.6 2 Dual Magnum 
or 
Intrro 
0.5 pt 
1.0 to 2.0 qt 
plus 0.3 0.3 to 0.5 0.5 to 0.6 
Fine (Heavy) silty 
clay loam*, clay 
loam, silty clay, clay 
Dual Magnum 1.3 pt 
or 
Intrro 2 .0 to 3.0 qt 
plus 0.6 to 0.83 2 Dual Magnum 
or 
Intrro 
0.6 pt 
1.0 to 2.0 qt 
plus 0.3 0.3 to 0.5 0.5 to 0.6 
*Silty clay loam soils are transitional soils and may be classified as medium textured soils in some regions of the U.S. 
1 On coarse textured soils, do not use on sand soil with less than 1% organic matter. However, on coarse textured soils with a 
calcareous surface area or a pH of 7.5 or higher, do not use on sand soils with less than 2% organic matter, or on loamy sand or 
sandy loam soils with less than 1% organic matter. 
2 Use the lower rate of this product in the early preplant tank mix on soils having a calcareous surface area or a pH of 7.5 or higher, 
and in those rare situations where soils within a field vary extremely in texture or organic matter content. 
Metribuzin 75 plus Sonalan 
Metribuzin 75 plus Sonalan Overlay Application: This product may be applied as a preemergence overlay application following a preplant 
incorporated application of Sonalan 3 EC. Consult the Sonalan label for specific directions on use, recommendations, restrictio ns, and any 
additional weeds not specified on this label. 
Metribuzin 75 plus Sonalan Tank Mix Application: Incorporate the tank mixture into the top 1 to 2 inches of soil within 21 days before 
planting according to label directions for Sonalan. 
Apply Metribuzin 75 plus Sonalan preplant incorporated if furrow irrigation is used or when a period of dry weather after appli cation is 
expected. If soybeans are planted on beds, apply and incorporate the tank mixture after bed formation. 
Mixing: Refer to the “Product Information” section in the front of this label. 
Application: Apply Sonalan uniformly and thoroughly mixed into the soil within 2 days after application. For specific application informati on, 
refer to the “Application” under “Product Information” section in the front of this label. 
Precautions (Metribuzin 75 plus Sonalan): For additional precautions, restrictions, limitations, incorporation, and sprayer clean up 
information, refer to the appropriate sections of this label and the Sonalan label. 
For Black nightshade control, refer to the Sonalan label for specific rates and application instructions. 
Broadcast Rates 
Soil Texture Metribuzin 75 Lb/A Sonalan 3EC Pt/A 
Coarse1 (Sandy loam, loamy sand) 0.3 1.25 to 2.0 
Medium3 (Loam, silt loam, silt, sandy clay, 
sandy clay loam) 
0.5 1.75 to 2.5 
Fine3 (Silty clay, silty clay loam 2, clay, clay loam) 0.6 2.25 to 3.0 
1 Do not use on coarse soils with less than 1% organic matter. 
2 Silty clay loam soils are transitional soils and may be classified as medium textured soils in some regions of the U.S. 
3 For control of Lambsquarters, Redroot pigweed, Wild mustard, and Green and Yellow foxtails on alkaline (calcareous) soils in Mi nnesota, 
Nebraska, South Dakota, and North Dakota only, apply this product at rates of 0.3 pound per acre on medium soils and 0.3 to 0.5

13 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
pound per acre on fine soils regardless of soil organic matter percentage (use 0.5 pound only where soil pH is less than 7.5 an d weed 
pressure is heavy). The 0.3 rate of this product in tank mix combination with Sonalan can be applied regardless of soil pH. For control of 
other weeds not listed on the label, use this product at full rates specified in the table above, but note that crop injury may occur on 
soils having a calcareous surface area or a pH of 7.5 or higher. 
Metribuzin 75 plus Trifluralin HF 
Metribuzin 75 and Triflura lin HF Overlay Application : This product may be applied as a preemergence broadcast or band overlay 
application following a pre-plant incorporated treatment of Trifluralin HF. Consult the Trifluralin HF label for specific direc tions for use, 
recommendations, restrictions , and any additional weeds not specified on this label. 
Metribuzin 75 plus Trifluralin HF Tank Mix Application: A single application of a tank mix combination of Metribuzin 75 and Trifluralin 
HF EC will control more broadleaf and grass weeds in soybeans than when either herbicide is used alone. 
Prepare the soil surface by deep plowing, offset disking or tandem disking prior to the application of the herbicide combinatio n. The soil 
surface should be well prepared and free of clods and trash. 
This product plus Trifluralin HF tank mix combination may be applied and incorporated into the soil up to 10 days before planti ng. 
Mixing: Refer to the “Product Information” section in the front of this label. 
Application: For specific application information refer to the “Product Information” section in the front of this label. 
Apply Metribuzin 75 plus Trifluralin HF to the soil surface and incorporate in the same operation, if possible. Variable weed c ontrol may 
result from delayed incorporation if Metribuzin 75 plus Trifluralin HF are applied to a wet, warm soil surface or if the wind v elocity is 10 mph 
or higher. Use machinery that mixes Metribuzin 75 plus Trifluralin HF thoroughly with the soil. Incorporation may be delayed up to 24 hours 
after application. Shallow incorporation with implements set to cut less than 2 inches deep may result in erratic weed control. Do not use 
spike or spring-tooth harrow alone or incorporation. 
Incorporation Equipment: 
1. Set PTO-driven equipment (tillers, cultivators, hoes) to cut 2 to 3 inches deep and space rotors to provide a clean sweep of th e soil. 
Do not operate PTO equipment at a speed greater than 4 mph. 
2. Set disk to cut 4 to 6 inches deep and operate twice in different directions at 4 to 6 mph. 
3. Set mulch treader and other similar disk-type implements to cut 3 to 4 inches deep and operate twice in different directions at 5 to 8 
mph. 
For coarse and medium textured soils only: 
4. Set rolling cultivator to cut 2 to 4 inches deep and operate twice at 6 to 8 mph. Set bed conditioner (Do-all) to cut 2 to 4 in ches deep 
and operate at 4 to 6 mph. 
Broadcast Rates 
Soil Texture Metribuzin 75 Lb/A Trifluralin HF EC Pt/A 
Coarse1 (Sandy loam, loamy sand) 0.3 1.0 
Medium (Loam, silt loam, silt, sandy clay, 
sandy clay loam) 0.5 1.5 
Fine (Silty clay, silty clay loam2, clay, clay loam)3 0.6 2.0 
1 Do not use on coarse soils with less than 1% organic matter. 
2 Silty clay loam soils are transitional soils and may be classified as medium textured soils in some regions of the U.S. 
3 For control of Lambsquarters, Redroot pigweed, Wild mustard, and Green and Yellow foxtails on alkaline (calcareous) soils in 
Minnesota, Nebraska, South Dakota, and North Dakota only, apply this product at rates of 0.3 pound per acre on medium soils 
and
 
0.3 to 0.5 pound per acre on fine soils regardless of soil organi c matter percentage (use 0.5 pound only where soil pH is less 
than 7.5 and weed pressure is heavy). The 0.3 pound rate of this product in tank mix combination with Trifluralin HF can be 
applied regardless of soil pH. For control of other weeds listed on the label use this product at full rates specified in the t able 
above, 
but note that crop injury may occur on soils having a calcareous surface area or a pH of 7.5 or higher. 
Precautions (Metribuzin 75 plus Trifluralin HF): Seedling disease, cold weather, excessive moisture, high salt concentration , or drought 
may weaken soybean seedlings and increase possibility of damage from tank mix. Do not plant soybeans deeper than 2 inches. Do 
not rotate any crop not listed on this label for 18 months following application.

14 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
In the Central United States, do not plant sorghum or oats for 12 months where the tank mix has been applied unless 20 inches o r 
more of irrigation and/or rainfall (total) was used to produce the crop. If less than 20 inches total water was used to produce the crop 
during the year, do not plant either crop for 18 months after the tank mix application. Cool, wet weather conditions during the early 
stage of growth may increase the possibility of injury to sorghum. 
For additional precautions, restrictions, limitations , and sprayer clean-up information refer to the appropriate section of this label. Do 
not use this tank mix combination on soils containing charcoal in Arkansas, Louisiana and Mississippi. 
Metribuzin 75 plus Dual Magnum 
Metribuzin 75 plus Dual Magnum Overlay Application: Apply a preplant incorporated treatment of Dual Magnum as directed on 
that product label for use on soybeans. Follow with a preemergence treatment of this product as directed on this label for use on 
soybeans. 
Metribuzin 75 plus Dual Magnum Tank Mix Applications 
Preplant Incorporated Application: Incorporate the tank mixture into the top 2 inches of soil within 14 days before planting using a 
disk, harrow, rolling cultivator, or similar implement. 
Apply Metribuzin 75 plus Dual Magnum preplant incorporated if fu rrow irrigation is used or when a period of dry weather after 
application is expected. If soybeans are planted on beds, apply and incorporate the tank mixture after bed formation. 
Preemergence Application: Dry weather following preemergence application of this product plus Dual Magnum tank mixture may reduce 
effectiveness. If weeds develop, cultivate uniformly with shallow tillage equipment such as rotary hoe that will not damage soybeans. 
Mixing Instructions: Refer to the “Product Information” section in the front of this label. 
Broadcast Rates 
 Metribuzin 75 Plus Dual Magnum 
Tank Mix Preemergence Applications 
0.5% to 3% Organic Matter 
Soil Texture Metribuzin 75 Lb/A Dual Magnum Pt/A 
Coarse1 (Loamy sand, sandy loam) 0.3 0.83 
Medium (Loam, silt loam, silt) 0.5 1.0 
Fine (Silty clay loam2, sandy clay loam, 
silty clay, sandy clay, clay loam, clay) 0.6 1.3 
Mississippi Delta Only 
(Silty clay, clay) 1.0 1.3 
 
Over 3% Organic Matter 
 
Coarse1 (Loamy sand, sandy loam) 0.5 1.0 
Medium (Loam, silt loam, silt) 0.6 1.3 
Fine (Silty clay loam2, sandy clay loam, 
silty clay, sandy clay, clay loam, clay) 0.6 to 0.83 1.3 to 1.6 
Mississippi Delta Only 
 (Silty clay, clay) 1.0 1.3 to 1.6 
1 Do not use on sand soils. Do not apply this product and Dual Magnum overlay or tank mix preemergence on loamy sand with 
less than 2% organic matter. 
2 Silty clay loam soils are transitional soils and may be classified as medium textured soils in some regions of the U.S. 
Broadcast Rates 
 Metribuzin 75 plus Dual Magnum 
Tank Mix Preplant Incorporated Applications 
0.5% to Less than 3% Organic Matter 
Soil Texture Metribuzin 75 Lb/A Dual Magnum Pt/A 
Coarse1 (Loamy sand, sandy loam) 0.3 0.83 
Medium (Loam, silt loam, silt) 0.5 1.0

15 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Fine (Silty clay loam2, sandy clay loam, 
silty clay, sandy clay, clay loam, clay) 0.6 1.3 
Mississippi Delta Only 
(Silty clay, clay) 0.6 to 0.83 1.3 
 3% or Greater Organic Matter 
Coarse1 (Loamy sand, sandy loam) 0.3 1.0 
Medium (Loam, silt loam, silt) 0.5 1.3 
Fine (Silty clay loam2, sandy clay loam, 
silty clay, sandy clay, clay loam, clay) 0.6 1.3 to 1.6 
Mississippi Delta Only 
 (Silty clay, clay) 0.6 to 0.83 1.3 to 1.6 
1 Do not use on sand soils. Do not apply Metribuzin 75 plus Dual Magnum tank mix preplant incorporated on sand or loamy sand 
with less than 2% organic matter or crop injury may occur. 
2 Silty clay loam soils are transitional soils and may be classified as medium textured soils in some regions of the U.S. 
Precautions (Metribuzin 75 and Dual Magnum) 
For additional precautions, restrictions, limitations, and sprayer clean-up information refer to the appropriate sections of th is label 
and the Dual Magnum label. 
Metribuzin 75 Plus Stealth 
Metribuzin 75 plus Stealth Overlay Application: Apply a preplant incorporated treatment of Stealth as directed on that product label 
for use on soybeans. Follow with a preemergence treatment of this product as directed on this label for use on soybeans. 
Metribuzin 75 plus Stealth Tank Mix Application 
Preplant Incorporated Application: Prepare the soil by plowing or disking to mix previous crop residues into the soil to a depth of 
4 to 6 inches. 
For specific application information refer to the “Product Information” section in the front of this label. 
Incorporate the tank mixture into the top 1 or 2 inches of soil within 7 days after application according to label directions f or Stealth. 
Mechanical incorporation is not required if a rain of 1/4 inch or more occurs within 7 days after application. Soybeans must be planted 
no later than 7 days after application of the tank mixture. 
Preemergence Application: Except for minimum and no-tillage systems, the seed bed should be firm and free of trash and clods. 
For specific application information refer to the “Product Information” section in the front of this label. Do not apply Stealt h 
preemergence north of Interstate 80. This application must be made after planting and before crop emergence. Do not incorporate . 
If cultivation is necessary because of soil crusting, soil compaction or weed germination before rain or irrigation, use shallo w tilling 
equipment such as a rotary hoe that does not damage soybeans. 
Mixing Instructions: Refer to the “Product Information” section in the front of this label. 
For information on applying this product in fluid or dry fertilizer refer to the “Application of Metribuzin 75 in Fluid Fertili zers” or 
“Commercial Impregnation and Applications of Metribuzin 75 on Dry Bulk Fertilizer” under the “Product Information” section in t he 
front of this label. 
Southern States and Eastern Coastal Plains 
For use only in Alabama, Arkansas, Florida, Georgia, Louisiana, Mississippi, North Carolina, Oklahoma, Southeastern Missouri “B ootheel” 
Region and Coastal Plains of Delaware*, Maryland*, New Jersey*, and Virginia*. 
*Do not use Metribuzin 75 plus Stealth on soils with less than 2% organic matter in the coastal plain of New Jersey or the Delma rva 
Peninsula.

16 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Broadcast Rates 
Metribuzin 75 Plus Stealth Tank Mix Applications 
Soil Texture Metribuzin 75 Lb/A Stealth Pt/A 
Coarse1 (Sandy loam, loamy sand) 0.3 1.5 
Medium (Loam, silt loam, silt, 
sandy clay, sandy clay loam) 0.5 1.5 
Fine (Silty clay, silty clay 
loam2, clay, clay loam) 0.6 1.5 to 2.0 
1 Do not use on sand soils. Do not use on loamy sand or sandy loam containing less than 1% organic matter. 
2 Silty clay loam soils are transitional soils and may be classified as medium textured soils in certain regions of the U.S. 
Do not use on muck or peat soils. 
Northeastern and North Central States 
For use only in Illinois, Indiana, Iowa, Kansas, Kentucky, Michigan, Minnesota, Nebraska, New York, North Dakota, Ohio, Pennsyl vania, 
South Dakota, Wisconsin, and Missouri (except the “Bootheel” region). 
Broadcast Rates 
Metribuzin 75 Plus Stealth Tank Mix Applications 
0.5% to 3% Organic Matter 
Soil Texture Metribuzin 75 Lb/A Stealth Pt/A 
Coarse1 (Sandy loam, loamy sand) 0.3 1.0 
Medium (Loam, silt loam, sandy clay, 
sandy clay loam) 0.5 1.5 to 2.0 
Fine (Silty clay, silty clay 
loam2, clay, clay loam) 0.5 to 0.6 1.5 to 2.0 
Over 3% Organic Matter 
Coarse1 (Sandy loam, loamy sand) 0.5 1.5 
Medium (Loam, silt loam, sandy clay, 
sandy clay loam) 0.5 to 0.6 1.5 to 2.0 
Fine (Silty clay, silty clay loam2, clay, 
clay loam) 0.6 to 0.83 2.0 to 2.5 
1 Do not use on sand soils. Do not use on loamy sand or sandy loam containing less than 1% organic matter. Where a range of rates 
is shown for medium and fine soils, use the higher rate if heavy weed infestations are anticipated. 
2 Silty clay loam soils are transitional soils and may be classified as medium textured soils in certain regions of the U.S. 
Do not use on muck or peat soils. 
Precautions (Metribuzin 75 plus Stealth): Soil incorporation deeper than recommended will reduce weed control and can result in crop 
injury. 
For additional precautions, restrictions, limitations, and sprayer clean-up information, refer to the appropriate sections of t his label 
and the Stealth label. 
Metribuzin 75 Plus Intrro 
Metribuzin 75 Plus Intrro Tank Mix Application: 
Preemergence 
Metribuzin 75 may be used in a tank mix combination with Intrro as a preemergence band or broadcast application to soybeans in 
accordance with the specified soil types and dosages specified. 
For specific information regarding spray equipment, dilution rates, mixing, directions for use, methods of application, limitations and 
restrictions refer to the appropriate section of this label. 
Refer to the Intrro label for pertinent recommendations, directions for use, restrictions and any additional weeds not specifie d on 
this label.

17 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Do not use on muck soils. 
Applications 
Metribuzin 75 Plus Intrro Tank Mix Preemergence Application (Broadcast Rates) 
Soil Texture Metribuzin 75 Lb/A Plus Intrro Qt/A 
 0.5% to 3% Organic Matter 
Coarse1 (Sandy loam) 0.3 plus 1.5 to 2.0 
Medium2 (Loam, silt loam, silt, sandy clay, 
sandy clay loam) 0.5 plus 1.5 to 2.0 
Fine2 (Silty clay, silty clay loam3, clay, 
clay loam) 0.6 plus 2.0 
Mississippi Delta Only 
(Silty clay to heavy clay) 1.3 plus 2.0 to 2.5 
 Greater than 3% Organic Matter 
Coarse1 (Sandy loam) 0.5 plus 1.5 to 2.0 
Medium2 (Loam, silt loam, silt, sandy clay, 
sandy clay loam) 
0.6 plus 1.5 to 2.0 
Fine2 (Silty clay, silty clay loam3, 
clay, clay loam) 0.6 to 0.83 plus 2.0 to 2.5 
Mississippi Delta Only 
 (Silty clay to heavy clay) 
1.3 plus 2.0 to 2.5 
1 Do not use Metribuzin 75 plus Intrro on sand or loamy sand soils with less than 2% organic matter. 
2 For control of Lambsquarters, Redroot pigweed, Wild mustard, Green and Yellow foxtails on alkaline (calcareous) soils in 
Minnesota, Nebraska, South Dakota, and North Dakota only, apply Metribuzin 75 at rates of 0.3 pound per acre on medium soils 
and 0.3 to 0.5 pound per acre on fine soils regardless of soil organic matter percentage (use 0.5 pound only where soil pH is l ess 
than 7.5 and weed pressure is heavy). The 0.3 pound per acre rate of Metribuzin 75 in tank mix combination with Intrro can be 
applied regardless of soil pH. For control of other weeds use th is product at full rates specified in the table above, but note that crop 
injury may occur
 on soils having a calcareous surface area or a pH of 7.5 or higher. 
3 Silty clay loam soils are transitional soils and may be classified as medium textured soils in some regions of the U.S. 
 
Preplant Incorporated: For specific application information refer to the “Product Information” section in the front of this label. 
Apply Metribuzin 75 plus Intrro preplant incorporated if furrow irrigation is used or when a pe riod of dry weather after applic ation is 
expected. If soybeans are planted on beds, apply and incorporate the tank mixture after bed formation. Apply within 7 days prio r to 
planting and shallowly incorporate into the upper 1 to 2 inches of soil. 
Do not use on muck soils. 
Applications 
Metribuzin 75 Plus Intrro Tank Mix Preplant Incorporated Applications (Broadcast Rates) 
Soil Texture Metribuzin 75 Lb/A Intrro Qt/A 
Coarse1 (Loamy sand [over 2% organic 
matter], sandy loam) 
0.3 2.0 to 2.5 
Medium (Loam, silt loam, silt) 0.5 2.5 to 3.0 
Fine (Silty clay loam2, sandy clay loam, 
silty clay, sandy clay, clay loam, clay) 
0.6 2.5 to 3.0 
Mississippi Delta Only 
(Silty clay, clay) 0.6 to 0.83 2.5 to 3.0 
1 Do not use Metribuzin 75 plus Intrro on sand or loamy sand soils with less than 2% organic matter. 
2 Silty clay loam soils are transitional soils and may be classified as a medium textured soils in some regions of the U.S. 
Restrictions (Metribuzin 75 Plus Intrro): 
x For additional precautions, restrictions, limitations and sprayer clean-up information, refer to the appropriate sections of t his label 
and the Intrro label.

18 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Metribuzin 75 Plus Command® 
Metribuzin 75 may be applied in combination with Command 4EC as a preplant or shallow incorporated application for the control of 
certain weeds in soybeans. Consult the Command 4EC label for specific directions on use, recommendations, restrictions , and any 
additional weeds not specified on this label. 
 
Restrictions (Metribuzin 75 Plus Command): 
x Do not apply this tank mix within 1000 feet of towns and subdivisions, commercial vegetable, fruit, nurseries, or greenhouse operations. 
Mixing: Refer to the “Product Information” section in the front of this label. 
Applications: Metribuzin 75 plus Command 4EC may only be applied with ground equipment as a preplant or shallow incorporated 
application. Metribuzin 75 plus Command 4EC should be immediately incorporated into the top 1 to 3 inches after application unless 
surface is dry. On dry soils, incorporate into the top 1 to 3 inches within 3 hours of tank mix application. 
Apply in a minimum of 15.0 gallons spray volume per acre with appropriate nozzle types and sizes to produce a coarse spray droplet. 
The use of an approved agricultural drift reducing additive shou ld be used for application volumes of 15.0 to 40.0 gallons per acre. 
The use of an approved agricultural drift reducing additive is required at spray volumes of 10.0 to 15.0 gallons per acre. 
NOTE: Off-site movement of Command spray drift or vapors can cause foliar whitening or yellowing of some vegetation. Prior to 
application of Command, read and strictly follow all precauti ons and application instructions as set forth in that label. 
For additional information on application, refer to the “Product Information” section in the front of this label and the Comman d label. 
Weeds controlled: 
Bristly starbur Florida pusley Pigweeds Smartweeds 
Carpetweed Galinsoga Prickly sida/Teaweed Spurred anoda 
Common ragweed Jimsonweed Purslane Velvetleaf 
Copperleaf Knotweed Redweed Venice mallow 
Florida beggarweed Lambsquarters Sesbania Wild mustards 
 
Barnyardgrass* Fall Panicum* Johnsongrass (seedling)* 
Bluegrass Foxtails (Green, Giant, Texas Panicum 
Broadleaf signalgrass Yellow*, Robust Purple) Witchgrass 
Crabgrass* Goosegrass 
*Use 2.0 pints per acre Command 4EC on coarse and medium textured soils with high populations of these weeds. 
Applications 
Metribuzin 75 Plus Command 4EC Tank Mix Preplant Incorporated Application (Broadcast Rates) 
Soil Texture1 Metribuzin 75 (Lb/A) Command 4EC Pt/A 
0.5% to 3% Organic Matter 
Coarse2 (Sandy loam, 
loamy sand) 
0.3 1.5 to 2.0 
Medium (Loam, silt loam, 
silt, sandy clay, sandy clay 
loam) 
0.3 to 0.5 1.5 to 2.0 
Fine (Silty clay, silty clay loam 3, 
clay, clay loam) 
0.3 to 0.5 1.5 to 2.0 
Over 3% Organic Matter 
Coarse2 (Sandy loam, 
loamy sand) 
0.3 1.5 to 2.0 
Medium (Loam, silt loam, 
silt, sandy clay, sandy clay 
loam) 
0.3 to 0.5 1.5 to 2.0 
Fine (Silty clay, silty clay 
loam3, clay, clay loam) 
0.5 to 0.6 1.5 to 2.0 
1 Crop injury may occur on soils having a calcareous surface area or a pH of 7.1 or higher. 
2 Do not use on coarse soils with less than 1% organic matter. 
3 Silty clay loam soils are transitional soils and may be classified as medium textured soils in some regions of the U.S.

19 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Restrictions (Metribuzin 75 plus Command): 
x Do not rotate to wheat, barley, alfalfa or seed corn in the fa ll of the year of application or in the spring of the following year as 
crop injury may occur. Do not rotate any crop not listed on this label for 18 months following application. 
x Do not apply when weather conditions favor drift. 
x Do not use treated vines for feed or forage. 
x Do not apply aerially or through irrigation equipment. 
Metribuzin 75 plus Canopy® plus a Grass Herbicide 
A tank mix combination of Metribuzin 75 plus Canopy 75 DF plus a registered and recommended grass herbicide (Dual Magnum, Intrr o, 
Stealth, Sonalan or Trifluralin HF) labeled for this use may be used for control of the following weeds in soybeans: 
Weeds Controlled 
Annual Broadleaves 
Bristly starbur Galingsoga Prickly sida/Teaweed Shepherd’s-purse 
Carpetweed Jimsonweed Purslane Smartweed 
Cocklebur Knotweed Ragweed, common Spurred Anoda 
Copperleaf, Hophornbeam Kochia Redweed Velvetleaf 
Florida beggarweed Lambsquarters Russian thistle Venice mallow 
Florida pusley Pigweed Sesbania Wild mustard 
Annual Grasses 
Barnyardgrass Crabgrass Johnsongrass (seedling) Sandbur 
Bluegrass Crowfootgrass Junglerice Sprangletop 
Broadleaf signalgrass Foxtails Panicum, fall Stinkgrass 
Browntop millet Goosegrass Panicum, Texas 
 
Tank mix combinations which include Dual Magnum, Intrro or Stealth can be applied preemergence broadcast or preplant 
incorporated broadcast. When Sonalan or Trifluralin HF are used in the tank mix, apply preplant incorporated broadcast. Refer t o 
the table below for specified rates of each product to be used in tank mix combinations:
 
Applications 
Metribuzin 75 Plus Canopy 75 DF Plus a Grass Herbicide (Broadcast Rates) 
Product Soil Texture1 
 Coarse2 Medium Fine 
Metribuzin 75 (Lb/A) 0.3 0.3 to 0.53 0.5 to 0.63 
Canopy DF (Oz/A) 3.0 3.0 3.0 to 4.0 
Trifluralin HF (Pt/A) 1.0 1.5 2.0 
Dual Magnum (Pt/A) 0.83 to 1.0 1.0 to 1.3 1.3 to 1.6 
Stealth (Pt/A) 1.5 1.5 to 2.0 1.5 to 2.5 
Intrro (Qt/A) 2.0 to 2.5 2.25 to 3.0 2.5 to 3.0 
Sonalan (Pt/A) 1.25 to 2.0 1.25 to 2.5 2.25 to 3.0 
1 Do not use on soils with a pH greater than 7.0. 
2 Refer to “Soil Texture” paragraph on this label for specific soil classification. 
3 Use the lower rate of Metribuzin 75 in preplant incorporated tank mix as in those situations where soils within a field vary 
extremely in texture or organic matter content. 
Important: If weeds escape in fields treated with these tank mix combinations, postemergence application of a registered and 
recommended herbicide will be needed for control. 
Refer to the “Product Information” section of this label for mixing and application directions. 
Precautions: For additional precautions, restrictions, limitations and sprayer clean-up information, refer to the appropriate sections of 
the labels for Metribuzin 75 and Canopy 75 DF. 
Do not use treated vines for feed or forage.

20 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Metribuzin 75 Plus Command Plus a Grass Herbicide 
Metribuzin 75 may be applied with Command 4EC and a grass herbicide (Trifluralin HF, Intrro, Dual Magnum, Stealth, or Sonalan) 
for the control of certain broadleaf weeds and grasses in soybeans. This combination will provide improved control of heavy 
infestations of Velvetleaf, Jimsonweed and C common ragweed. Metribuzin 75 and Command 4EC plus a grass herbicide may be 
applied preplant incorporated broadcast. Consult the Command, Trifluralin HF, Intrro, Dual Magnum, Stealth or Sonalan labels fo r 
specific directions for use, recommendations, restrictions , and additional weeds controlled not specified on this label. 
Mixing: Refer to the “Product Information” section in the front of this label. 
Application: For specific application information, refer to the “Product Information” section in the front of this label. 
 
Weeds Controlled 
Annual Broadleaves 
Bristly starbur Jimsonweed Purslane Smartweed 
Carpetweed Knotweed Ragweed, common Spotted spurge 
Cocklebur Kochia Redweed Spurred anoda 
Copperleaf, Hophornbeam Lambsquarters Russian thistle Velvetleaf 
Florida beggarweed Mustard Sesbania Venice mallow 
Florida pusley Pigweed Shepherd’s-purse 
Galinsoga Prickly sida/Teaweed Sicklepod, wild 
 
Annual Grasses 
Barnyardgrass Browntop millet Foxtails Panicum, fall 
Bluegrass Crabgrass Goosegrass Witchgrass 
Broadleaf signalgrass Crowfootgrass Johnsongrass (seeding) 
 
Metribuzin 75 and Command plus Trifluralin HF, Intrro, Dual Magnum, Stealth or Sonalan will provide suppression (reduce the 
competition) of Cocklebur and Sunflower. 
Applications 
Metribuzin 75 Plus Command Plus a Grass Herbicide (Broadcast Rates) 
Product Soil Texture1 
 Coarse Medium Fine 
Metribuzin 75 (Lb/A) 0.3 0.3 to 0.52 0.5 to 0.62 
Command 4EC3 (Pt/A) 0.5 to 0.75 0.5 to 0.75 0.5 to 0.75 
Trifluralin HF (Pt/A) 1.0 1.5 2.0 
Dual Magnum (Pt/A) 0.83 to 1.0 1.0 to 1.3 1.3 to 1.6 
Stealth (Pt/A) 1.5 1.5 to 2.0 1.5 to 2.5 
Intrro (Qt/A) 2.0 to 2.5 2.5 to 3.0 2.5 to 3.0 
Sonalan (Pt/A) 1.25 to 2.0 1.75 to 2.5 2.25 to 3.0 
1 Refer to “Soil Texture” paragraph on this label for specific soil classification. On coarse textured soils with a calcareous surface 
area or a pH of 7.5 or higher, do not use on loamy sand or sandy loam soils with less than 1% organic matter. 
2 The higher rate of Metribuzin 75 may be used for the control of Sicklepod and Hemp sesbania. Use lower rate of Metribuzin 75 in 
the preplant incorporated tank mix on soils having a calcareous surface area or a pH of 7.5 or higher and in those situations 
where soils within a field vary extremely in texture or organic matter content. 
3 Use the higher rate specified under moderate to heavy weed infestations. 
Metribuzin 75 plus Scepter plus a Grass Herbicide 
Metribuzin 75 may be applied with Scepter herbicide and a grass herbicide (Trifluralin HF, Intrro, Dual Magnum, Stealth or Sona lan) 
for the control of certain broadleaf weeds and grasses in soybeans. Metribuzin 75 and Scepter plus Trifluralin HF or Sonalan may be 
applied preplant incorporated broadcast. Metribuzin 75 and Scepte r plus Intrro, Dual Magnum or Stealth may be applied preplant 
incorporated, preemergence broadcast or in a band application. 
Consult the Scepter, Trifluralin HF, Intrro, Dual Magnum, Stealth, or Sonalan labels for specific directions for use, recommendations, 
restrictions, and additional weeds controlled not specified on this label. 
Mixing: Refer to the “Product Information” section in the front of this label.

21 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Application: For specific application information, refer to the “Product Information” section in the front of this label. 
 
Weeds Controlled: Metribuzin 75 plus Scepter plus Trifluralin HF, Intrro, Dual Magnum, Stealth or Sonalan will control the following 
broadleaf weeds and grasses: 
Weeds Controlled 
Annual Broadleaves 
Bristly starbur Galinsoga Prickly sida/Teaweed Smartweed 
Buffalobur Jimsonweed Purslane Spotted spurge 
Carpetweed Knotweed Ragweed, common Spurred anoda 
Cocklebur Kochia Russian thistle Velvetleaf 
Coffee senna Lambsquarters redweed Venice mallow 
Copperleaf, Hophornbeam Morningglory, pitted Sesbania Wild mustard 
Florida beggarweed Morningglory, smallflower Shepherd’s-purse 
Florida pusley Pigweed Sicklepod 
Annual Grasses 
Barnyardgrass Browntop millet Foxtails Panicum, fall 
Bluegrass Crabgrass Goosegrass Witchgrass 
Broadleaf signalgrass Crowfootgrass Johnsongrass (seeding) 
 
Metribuzin 75 and Scepter plus Trifluralin HF, Intrro, Dual Magnum, Stealth or Sonalan will suppress (reduce the competition of ) 
Ivyleaf and Tall morningglory and Red rice. 
Metribuzin 75 Plus Scepter Plus A Grass Herbicide (Broadcast Rates) 
Product Soil Texture1 
 Coarse Medium Fine 
Metribuzin 75 (Lb/A) 0.3 0.3 to 0.52 0.5 to 0.62 
Scepter (1.5 Lb/Gal liquid3 Pt/A) 
-or- 
0.3 to 0.5 0.3 to 0.5 0.3 to 0.5 
Scepter 70 DG3 (Oz/A) 1.4 to 2.1 1.4 to 2.1 1.4 to 2.1 
Trifluralin HF (Pt/A) 1.0 1.5 2.0 
Dual Magnum (Pt/A) 0.83 to 1.0 1.0 to 1.3 1.3 to 1.6 
Stealth (Pt/A) 1.5 1.5 to 2.0 1.5 to 2.5 
Intrro (Qt/A) 2.0 to 2.5 2.5 to 3.0 2.5 to 3.0 
Sonalan (Pt/A) 1.25 to 2.0 1.75 to 2.5 2.25 to 3.0 
1 Refer to “Soil Texture” paragraph on this label for specific soil classification. On coarse textured soils with a calcareous su rface 
area or a pH of 7.5 or higher, do not use on loamy sand or sandy loam soils with less than 1% organic matter. 
2 Use the higher rate of Metribuzin 75 for preemergence tank mix application and for the control of Sicklepod and Hemp sesbania. 
Use the lower rate of Metribuzin 75 in the preplant incorporated tank mix on soils having a calcareous surface area or a pH of 
7.5 or higher, and in those situations where soils within a field vary extremely in texture or organic matter content. 
3 Use the higher rate specified under moderate to heavy weed infestations. 
Metribuzin 75 Plus Pursuit® and a Grass Herbicide 
Metribuzin 75 may be tank mixed with Pursuit herbicide and a registered and recommended grass herbicide (Dual Magnum, Intrro, 
Stealth, Sonalan or Trifluralin HF) for control of certain broadleaf and grass weeds in soybeans. Refer to the product labels f or 
Pursuit, Dual Magnum, Intrro, Stealth, Sonalan or Trifluralin HF for additional directions for use, recommendations, restrictio ns and 
limitations not included on this label. 
Tank mix combinations of Metribuzin 75, Pursuit and Dual Magnum, Intrro or Stealth can be applied broadcast preemergence or 
preplant incorporated. When the grass herbicide used is Sonalan or Trifluralin HF, apply the tank mix broadcast preplant 
incorporated. 
Mixing and Application: Refer to the “Product Information” section of this label for directions on mixing and application of Metribuzin 
75.

22 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Applications 
Metribuzin 75 Plus Pursuit and a Grass Herbicide* 
Soil Texture Metribuzin 75 Lb/A Pursuit Oz/A 
Coarse 0.3 4.0 
Medium 0.4 to 0.5 4.0 
Fine 0.5 to 0.6 4.0 
*For control of grass weeds, include Dual Magnum, Intrro, Stealt h, Sonalan or Trifluralin HF at label rates in the tank mix 
with Metribuzin 75 and Pursuit herbicides. 
 
Restrictions: 
x Do not apply this tank mix with aerial or irrigation equipment. 
x Do not apply when weather conditions favor drift, or allow sprays to drift onto desirable plants. 
x Do not use treated vines for feed or forage. 
x Refer to appropriate sections of the Pursuit Plus herbicide label for restrictions on use area and rotational crops. 
Metribuzin 75 Plus Linuron Plus (Intrro or Dual Magnum) 
Metribuzin 75 Plus Linuron plus (Intrro or Dual Magnum) Tank Mix Application: Metribuzin 75 may be applied in combination 
with Linuron 50 DF or 4L and Intrro or Dual Magnum as a pree mergence application for the control of certain weeds in soybeans. 
Consult the Linuron, Intrro, or Dual Magnum labels for specific directions for use, recommendations, restrictions , and any additional 
weeds not specified on this label. 
Mixing: Refer to the “Product Information” section in the front of this label. 
Application: Applications can be made only with ground spray equipment in accordance with specified soil types and dosage rates. 
For specific application information, refer to the “Product Information” section in the front of this label. 
Metribuzin 75 Plus Linuron Plus (Intrro or Dual Magnum) 
Broadcast Rates (0.5% to 3% Organic Matter Only) 
Soil Texture 
Product 
Coarse1 (Sandy, loamy 
sand, sandy loam) 
Medium (Loam, silt loam, silt, 
sandy clay, sandy clay loam) 
Fine (Silty clay, silty clay 
loam2, clay, clay loam) 
Metribuzin 75 (Lb/A) 0.16 to 0.25 0.25 to 0.3 0.3 to 0.5 
Linuron 50 DF (Lb/A) 
or 
Linuron 4L (Pt/A) 
0.3 to 0.5 0.5 to 0.75 0.75 to 1.5 
Intrro (Qt/A) 0.75 to 1.0 1.0 to 1.5 1.25 to 2.0 
or 
Dual Magnum (Pt/A) 0.6 to 0.83 0.83 to 1.0 1.0 to 1.3 
1 Do not use Metribuzin 75 plus Linuron plus (Intrro or Dual Magnum) on sand soils with less than 1% organic matter. 
2 Silty clay loam soils are transitional soils and may be classified as medium textured soils in some regions of the U.S. 
Precautions (Metribuzin 75 plus Linuro n plus (Intrro or Dual Magnum): For additional precautions, restrictions, limitations and 
sprayer clean-up information, refer to the appropriate sections of this label and the Linuron label and the Intrro or Dual Magn um 
labels. 
For Use In Coarse (Light) Soils in Alabama, Arkansas, Florida, Georgia, Louisiana, Mississippi, Missouri, North Carolina, 
Oklahoma, South Carolina, Tennessee, Texas and Virginia. 
Metribuzin 75 herbicide may be applied alone or in combination with Trifluralin HF, Intrro or Dual Magnum for use in coarse-textured, 
low organic matter soils in the states listed above for the cont rol of certain weeds in soybeans. Refer to the appropriate sect ion of 
this label and the Trifluralin HF, Intrro or Dual Magnum label for specific directions for use, recommendations, restrictions , and any 
additional weeds not specified on this label. 
Mixing: Refer to the “Product Information” section in the front of this label. 
Application: For specific application information, refer to the “Product Information” section in the front of this label.

23 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Metribuzin 75 (Alone) Preemergence Application (Broadcast Rates) 
Soil Texture Organic Matter 
 
Metribuzin 75 Lb/A 
Coarse (Light) Soils Sand1, 
loamy sand, sandy loam 
0.5 % or Above 0.3 to 0.52 
1 Do not use on use on sand with less than 1% organic matter. 
2 Use the higher rate under heavy weed pressures and/or on soils higher in organic matter. 
Metribuzin 75 in Combination with Other Herbicides: Metribuzin 75 may be applied in a tank mix combination with Trifluralin HF 
as a preplant incorporated application or as a preemergence overlay application following a preplant incorporated application o f 
Trifluralin HF. Metribuzin 75 may also be used as a preemergence application in combination with Intrro or Dual Magnum. 
 
For Use in Coarse (Light) Soils 0.5% or Above Organic Matter (Broadcast Rates) 
Soil Texture 
Combination 
Product/A Plus Metribuzin 75 Lb/A 
Coarse (Light) Soils 
Sand1, loamy sand, sandy loam 
Preplant Incorporated 
Trifluralin HF 4EC 1.0 pt Plus 0.3 to 0.52 
 Preemergence 
Intrro 1.5 to 2.0 qt 
Dual Magnum 0.83 to 1.0 pt Plus 0.3 to 0.52 
1 Do not use on sand with less than 1% organic matter. 
2 Use the higher rate under heavy weed pressures and/or on soils higher in organic matter. 
Restrictions: 
x Do not use on sand soils with less than 1% organic matter, or on sandy loam or loamy sand soils with less than 0.5% organic ma tter. 
x For additional precautions, restrictions, limitations, and sprayer clean-up information, refer to the appropriate sections of this 
label and the Trifluralin HF, Intrro, and Surflan labels. 
Burndown Weed Control - Field Corn and Soybeans 
Metribuzin 75 can be used as part of an herbicide program fo r burndown of existing vegetation prior to crop emergence in 
conservation tillage systems. Metribuzin 75 may be tank mixed with 2,4-D low volatile ester (LVE), Gramoxone Inteon™, glyphosat e 
(Makaze or Touchdown® for control of emerged weeds prior to field corn or soybean emergence. Metribuzin 75 tank mixes with 2,4-
DB, Fusion®, Poast Plus® ,or Intensity® may also be used in soybeans for control of emerged weeds prior to crop emergence. 
Metribuzin 75 burndown tank mixes can be applied before planting or prior to crop emergence in the following areas: 
Field Corn: 
Illinois, Indiana, Iowa, Kansas, Kentucky, Michigan, Minnesota, Missouri, Nebraska, Ohio, South Dakota, and Wisconsin. 
Soybeans: 
All areas for all product except Fusion tank mixes - see Fusion section of this label for recommended states. 
Application: Metribuzin 75 may be applied up to 30 days prior to planting or preemergence. Apply only by ground equipment when 
Metribuzin 75 is used for burndown of existing vegetation in conservation tillage systems. Metribuzin 75 and tank mix partner 
burndown rates are listed in the following 3 tables.
 
Metribuzin 75 Burndown Rates 
Field Corn and Soybeans 
Crops Application Timing Metribuzin 75 Rate (Oz/A) 
Field corn Preplant (0 to 30 days) 2.0 to 5.3 
Iowa 
Kansas Preemergence 
Missouri 
Nebraska 
South Dakota

24 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Field corn 
Illinois 
Indiana 
Kentucky 
Michigan 
Minnesota 
Ohio 
Wisconsin 
Preplant (10 to 30 days) 2.0 to 5.3 
Preplant (0 to 9 days) 2.0 to 4.0 
Preemergence 
Soybeans Preplant (0 to 30 days) 2.0 to 5.3 
Preemergence 
 
Restrictions (Field Corn): 
x Do not apply on coarse textured soils with less than 1.5% organic matter. 
x Do not apply more than 4.0 ounces of Metribuzin 75 per acre on soils with less than 2% organic matter. 
x Do not apply on soils having pH 7.0 or greater. 
x Do not apply more than 5.3 ounces Metribuzin 75 (0.2 5 pound active ingredient) per acre per growing season. 
x Plant corn seed a minimum of 1-1/2 inches deep. 
x Metribuzin 75 may only be used in hybrid seed corn production fields if both inbred parents are know to be tolerant to Metribu zin 75. 
 
Restrictions (Soybeans): 
x Apply only 2,4-D ethylhexyl ester (2,4-D EHE) formulations wh ich are registered for preplant or burndown use in soybeans. 
x Do not apply tank mixtures containing 2,4-D EHE if wind is blowing toward desired susceptible plants (i.e. cotton, tobacco, 
tomato, etc.) or when wind speeds exceed 6 mph. 
Restrictions: Do not apply these treatments after crop emergence. Observe all precautions and limitations on the labeling of all 
products used in tank mixtures. Refer to the Product Information section of this label for additional information, precautions, and 
limitations. 
Feeding restrictions. Pre-harvest Interval (PHI): Corn treated with Metribuzin 75 may be harvested for silage or grain 60 days after 
treatment. Soybean vines or hay treated with Metribuzin 75 may be grazed or fed to livestock 40 days after application. Do not feed 
hay, forage, fodder or graze 2,4-D, Intensity, or Fusion treated vegetation. Follow the most restrictive preharvest interval of all 
products used in a tank mixture. 
Metribuzin 75 Plus Tank Mix Partner Burndown Rates - Field Corn or Soybeans 
Product Rate Directions And Remarks 
Metribuzin 75 2.0 to 5.3 oz/A* In soybeans, apply at least 7 days preplant when using 2,4-D EHE at 0.25 to 0.5 
+ + lb AI/A and at least 30 days preplant with rates greater than 0.5 lb AI/A. 
2,4-D EHE 0.25 to 1.0 lb AI/A Include crop oil concentrate (COC) at the rate of 1.0 gal/100 gal of spray solution 
 (1% v/v). 
 In corn, apply at least 7 days preplant or at least 3 days after planting but before 
corn emergence. 
Metribuzin 75 2.0 to 5.3 oz/A* Must be applied prior to crop emergence. Use 24.0 to 32.0 fl oz of Gramoxone 
+ + Inteon for weeds less than 4 inches in height and 32.0 to 48.0 fl oz when weeds 
Gramoxone Inteon 24.0 to 48.0 fl oz/A are 4 to 6 inches in height. Apply in 20.0 to 60.0 gal of water/A. Include either 
 nonionic surfactant at 1.0 qt/100 gal (0.25% v/v) or crop oil concentrate at 
1.0 gal/100 gal (1% v/v) of spray solution. 
Metribuzin 75 2.0 to 5.3 oz/A* For this tank mix follow the Directions and Remarks Sections above for 
+ + Metribuzin 75 + 2,4-D EHE and Metribuzin 75 + Gramoxone Inteon, paying 
Gramoxone Inteon 24.0 to 48.0 fl oz/A special attention to crop planting restrictions with 2,4-D EHE. Include either 
+ 
2,4-D EHE 
+ 
0.25 to 1.0 lb AI/A 
nonionic surfactant or crop oil concentrate in this tank mix. 
Product Rate Directions And Remarks

25 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Metribuzin 75 2.0 to 5.3 oz/A* Must be applied prior to crop emergence. Use the higher rates as weeds 
+ + approach the maximum weed heights listed in the “Weeds Controlled” section 
glyphosate (Makaze) 12.0 to 24.0 fl oz/A below. Apply in 10.0 to 20.0 gal of water/A. With glyphosate (Makaze) and 
or or Touchdown, include nonionic surfactant at 2.0 qt/100 gal (0.5% v/v) and 
Touchdown 8.0 to 16.0 fl oz/A ammonium sulfate (spray grade) at 17.0 lb/100 gal of spray solution. With 
 glyphosate (Makaze), include ammonium sulfate (spray grade) at 17.0 lb/100 
 gal of spray solution. Any glyphosate formulation registered and labeled for 
use in field corn or soybeans may be tank mixed with Metribuzin 75. 
Metribuzin 75 2.0 to 5.3 oz/A* For this tank mix follow the Directions and Remarks Sections above for 
+ + Metribuzin 75 + 2,4-D EHE and Metribuzin 75 + glyphosate (Makaze) / 
glyphosate (Makaze) 12.0 to 24.0 fl oz/A Touchdown, paying special attention to planting restrictions with 2,4-D EHE. Use 
or or the adjuvant recommendations under the Metribuzin 75 + glyphosate (Makaze) / 
Touchdown 8.0 to 16.0 fl oz/A Touchdown tank mix. Do not use crop oil concentrate. 
+ + 
2,4-D EHE 0.25 to 1.0 lb AIA 
*If applied to field corn grown in Illinois, Indiana, Kentucky, Michigan, Minnesota, Ohio , and Wisconsin, refer to Table 1 for correct Metribuzin 75 
rate based on application timing. 
 
Metribuzin 75 Plus Tank Mix Partner Burndown Rates - Soybeans Only 
Product Rate Directions And Remarks 
Metribuzin 75 2.0 to 5.3 oz/A Apply preplant or before soybean emergence. Include nonionic surfactant at 
+ 
2,4-DB 
+ 2.0 qt/100 gal (0.5% v/v) of spray solution. 
0.125 to 0.21875 lb AI/A 
Metribuzin 75 2.0 to 5.3 oz/A For use only in DE, IL, IN, IA, KS, KY, MD, MI, MN, MO, NE, ND, OH, PA, SD, 
+ + VA, WV, and WI. For this tank mix follow the planting restrictions under the 
Fusion 4.0 to 8.0 fl oz/A Directions and Remarks Section above for Metribuzin 75 + 2,4-D EHE. Fusion 
+ + rates of 4.0, 6.0 and 8.0 fl oz will control certain grasses up to 2, 4 and 6 
2,4-D EHE 0.25 to 1.0 lb AI/A inches in height, respectively. Include either crop oil concentrate at 
 1.0 gal/100 gal (1.0% v/v) or nonionic surfactant at 1.0 to 2.0 qt/100 gal 
 (0.25 to 0.5% v/v) of spray solution. 
Refer to the Fusion label for additional information. 
Metribuzin 75 2.0 to 5.3 oz/A For this tank mix follow the planting restrictions under the Directions and 
+ + Remarks Section above for Metribuzin 75 + 2,4-D EHE. The 8.0 and 12.0 oz 
Poast Plus 8.0 to 16.0 fl oz/A rate of Poast Plus will control certain grasses up to 2 and 3 inches in ht, 
+ + respectively. Include either crop oil concentrate at the rate of 1.0 gal/100 gal of 
2,4-D EHE 0.25 to 1.0 lb AI/A spray solution (1% v/v) or Dash™ HC at 1.0 pt/A. Refer to the Poast Plus label 
for additional information. 
Metribuzin 75 2.0 to 5.3 oz/A For this tank mix follow the planting restrictions under the Directions and 
+ + Remarks Section above for Metribuzin 75 + 2,4-D EHE. The 3.0 and 4.0 fl oz 
Intensity 3.0 to 4.0 fl oz/A rates of Intensity will control certain grasses up to 3 and 4 inches in height, 
+ + respectively. 
2,4-D EHE 0.25 to 1.0 lb AI/A Include crop oil concentrate at the rate of 1.0 qt/A and 28% UAN (urea 
 ammonium nitrate) at a rate of 1.0 to 2.0 qt/A. Refer to the Intensity label for 
 additional information. 
 
WEEDS CONTROLLED. Metribuzin 75 in tank-mixtures with the above herbicides will provide burndown control of the weeds 
listed on the table below.

26 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Weeds Controlled By Burndown Rates of Metribuzin 75 
Metribuzin 75 plus 
 
Poast Plus Intensity + Fusion 
glyphosate 
glyphosate (Makaze)/ Gramoxone 
 
+ 2,4-D 2,4-D + 2,4-D (Makaze)/ Touchdown + Gramoxone Inteon + 
Weeds Controlled 2,4-D EHE LVE LVE LVE Touchdown 2,4-D EHE Inteon 2,4-D EHE 2,4-DB 
Annual Grasses Maximum Burndown Height (Inches) 
Barley - - - 8 4 to 6 
Barnyardgrass 2 to 3 3 to 4 - 6 4 to 6 
Crabgrass spp. 2 to 3 - - 6 4 to 6 
Foxtail spp. 2 to 3 3 to 4 2 to 6 8 4 to 6 
Johnsongrass, 
seedling 
 
2 to 3 - - 8 4 to 6 
 
Panicum, fall 2 to 3 3 2 to 6 6 4 to 6 
Sandbur, field Does not - - - 8 4 to 6 
Shattercane control 2 to 3 - - 8 4 to 6 Does not 
Wheat, volunteer these - - - 6 4 to 6 control these 
Witchgrass species 2 to 3 - - 6 4 to 6 species 
Broadleaves Maximum Burndown Height (Inches) 
 Buffalobur - 6 6 4 to 6 4 to 6 - 
Chickweed, common 6 6 8 4 to 6 4 to 6 2 
Cocklebur, common 6 6 8 4 to 6 4 to 6 6 
Dandelion, common 6 dia3 2 diab 6 diaa 4 diad 6 diaa 2 dia 
Henbit 4 4 4 4 to 6 4 to 6 - 
Horseweed/ 
marestail 
 6ac 4b 6 3 6a 2c 
Jimsonweed 6 6 6 4 to 6 4 to 6 2 
Kochia* 4ac 4 4 4 4 - 
Ladysthumb 6 6 8 4 to 6 4 to 6 3 
Lambsquarters, common 6 6 8 4 to 6 4 to 6 2 
Lettuce, prickly 6 4 6 4 to 6 4 to 6 2 
Mallow, Venice 6 6 6 4 to 6 4 to 6 - 
Mornigglorys spp. 6 2 4 2 4 4 
Mustard spp. 6 6 8 4 to 6 4 to 6 2 
Pennycress, field 6 6 6 4 to 6 4 to 6 2 
Pigweed, spp. (annual) 6 6 8 4 to 6 4 to 6 3 
Ragweed, common 6 6b 8 4 to 6 4 to 6 2 
Ragweed, giant 6ac 4b 6 4 6 2 
Shepherd’s-purse 6 6 6 4 to 6 4 to 6 - 
Sida, prickly 6 4 4 4 4 1 
Smartweed, 
Pennsylvania 
6 6 8 4 to 6 4 to 6 3 
Sunflower, common 6 6 6 4 to 6 4 to 6 4 
Thistle, Russian 4ac 2 to 4bc 6 4 4 to 6 3c 
Velvetleaf 6 6 8 4 to 6 4 to 6 3 
Waterhemp spp. 6 6 8 4 to 6 4 to 6 3 
a Use 2,4-D EHE at 0.5 pound active ingredient per acre. 
b Use a minimum glyphosate (Makaze) rate of 16.0 fluid ounces per acre and a minimum Touchdown rate of 10.6 ounces per acre. 
c Use Metribuzin 75 at 4.0 ounces per acre for optimum control. 
d Suppression only. 
*Does not control triazine resistant biotypes. 
RESIDUAL WEED CONTROL 
Metribuzin 75 burndown programs can be used as part of a full season weed control program in both field corn and soybeans when, 
1) applied as a tank mixture with residual herbicides, or 2) followed with a postemergence weed control program, which is regis tered 
for use on that crop. 
For residual control, Metribuzin 75 burndown programs may include tank mixes with the following herbicides or combination of herbicides:

27 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Field Corn 
Alachlor Clarity® Lariat® Pursuit Plus a 
Atrazine Dual Magnum Linex® Rifle® 
Bicep II Magnum® Dual II Magnum® Linuron Rifle Plus® 
Bicep Lite II Magnum® Guardsman Max® Lorox® Simazine 
Bullet® Harness® Outlook® Stealth 
Cadence® Harness Xtra Pursuit a Topnotch® 
a Use only Pursuit resistant/tolerant corn hybrids. 
 
Soybeans b Alachlor Dual Magnum Pursuit Sencor®b 
Canopy Linuron Pursuit Plus Squadron® 
Command Lorox Scepter Stealth 
b Metribuzin 75 used (alone and in tank mixes) on soybeans at higher labeled rates than those listed for burndown weed control wi ll 
also provide residual control of those weeds listed in the “Weeds Controlled by Metribuzin 75 Tank Mix Combinations” section of 
the Metribuzin 75 label. 
Refer to the individual product labels for additional information, precautions, and limitations. 
Southern And Southeastern States Only 
Postemergence Directed Spray Applications 
Metribuzin 75 can be applied in postemergence directed sprays to soybeans for control of certain weeds which escape preplant 
or preemergence herbicide applications and for control of additional flushes of weeds that may occur after soybeans have 
emerged. 
Postemergence directed sprays of Metribuzin 75 can be applied to soybeans in addition to a preemergence or preplant 
application of Metribuzin 75 herbicide according to label directions. 
Weeds Controlled: Metribuzin 75, applied postemergence to soybeans as a directed spray according to directions on this label, 
will control the following at rates shown (broadcast basis) when grasses and common ragweed are less than 1 inch tall and 
other broadleaves are less than 3 inches tall: 
 
0.3 Pound per Acre 
Carpetweed (Mollugo verticillata ) Mexicanweed (Caperonia castaniifolia ) 
Cocklebur (Xanthium pensylvanicum ) Pigweeds (Amaranthus spp.) 
Crabgrass (Digitaria spp.) Purslane (Portulaca oleracea ) 
Dayflower (Commelina spp.) Sicklepod (Cassia obtusifolia ) 
Florida beggarweed ( Desmodium tortuosum ) Velvetleaf (Abutilon theophrasti ) 
 
0.3 to 0.6 Pound per Acre 
Pricklysida/Teaweed (Sida spinosa) Sesbania (Sesbania spp.) 
 
0.6 Pound per Acre 
Ragweed, common (Ambrosia artemisiifolia) 
At the rate of 0.6 pound per acre Morningglory species, ( lpomoea spp.) Horsenettle, ( Solanum spp.) Florida pusley, ( Richardia 
scabra) Spotted spurge ( Euphorbia maculate) and Wild poinsettia ( Euphorbia heterophylla ) are suppressed when Metribuzin 75 is 
applied before these weeds are 3 inches tall. The 0.6 pound per acre rate will suppress broadleaf signalgrass (Brachiaria platyphylla) 
up to 1 inch tall. 
Metribuzin 75 Postemergence Directed Spray Applications 
Crop Metribuzin 75 Lb/A 
Soybeans 
(AL, AR, FL, GA, KY, LA, MS, MO, 
NC, OK, SC, TN, and TX) 
0.3 to 0.6 
(broadcast basis)
 
 
Apply proper dosage using 10.0 to 40.0 gallons of water per acre as a directed spray in a 6- to 8-inch band on each side of the row 
after soybeans are 8 inches tall and before broadleaf weeds are 3 inches tall and before grasses and Common ragweed are 1 inch

28 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
tall. For best results the spray must cover weed foliage with minimum or no contact with soybean foliage. Add a nonionic surfac tant 
such as Activator 90 or Liberate® to the spray mixture to obtain better wetting of weed leaf surfaces. To determine the correct 
dosage of Metribuzin 75 for a band application see “Banded Appl ication” under the “Product Information” section in the front of this 
label. 
If necessary, a second postemergence directed spray application can be made after 7 days. 
Do not feed or graze green soybean vines. Do not harvest soybeans or use dry soybeans vines for feed or forage within 70 days o f 
last application. 
Apply proper dosage using 10.0 to 40.0 gallons of water per acre as a directed spray in a 6- to 8-inch band on each side of the row 
after soybeans are 8 inches tall and before broadleaf weeds are 3 inches tall and before grasses and Common ragweed are 1 inch 
tall. For best results the spray must cover weed foliage with mi nimum or no contact with soybean foliage. Add a nonionic surfac tant 
such as Activator 90 or Liberate® to the spray mixture to obtain better wetting of weed leaf surfaces. To determine the correct dosage 
of Metribuzin 75 for a band application see “Banded Application” under the “Product Information” section in the front of this l abel. 
If necessary, a second postemergence directed spray application can be made after 7 days. 
Restrictions: 
x Do not feed or graze green soybean vines. Pre-harvest Interval (PHI): Do not harvest soybeans or use dry soybeans vines for 
feed or forage within 70 days of last application. 
Precautions (Directed Postemergence): 
x Do not apply directly to soybeans or serious crop injury will occur. 
x Do not allow spray to contact more than the lower 1/4 to 1/3 of soybean plants. Soybean leaves contacted by the spray will be 
killed. 
x Do not apply Metribuzin 75 postemergence to sensitive soybean varieties. 
x See “Precautions” in the front of this label. 
x To avoid injury to other crops or desirable plants from spray drift, sprayer pressure must not exceed 30 psi and the sprayer m ust 
be fitted with nozzles no smaller than 8002 T-Jet® (or equivalent). 
x Do not apply under weather conditions which favor drift. 
POTATOES 
Metribuzin 75 herbicide may be used in ground, aircraft or specified chemigation equipment as a preemergence and/or 
postemergence application to potatoes. Early maturing smooth sk inned white and all red skinned varieties may be injured with 
postemergence applica
tions. The varieties Atlantic, Bellchip, Centennial, Chipbelle and Shepody are sensitive to Metribuzin 75. Avoid 
postemergence applications on these varieties. Preemergence applications on these varieties may cause crop injury under adverse weather 
conditions, on coarse soils, under high soil pH, with higher rates per acre and with mechanical incorporation. 
 
Ground Application: Metribuzin 75 may be used with ground spray equipment applied as a preemergence and/or postemergence 
application for control of the listed grass and broadleaf weeds in potatoes. Apply as a uniform broadcast spray at 20.0 or more gallons 
per acre. 
Aerial Application: Metribuzin 75 may be applied in aerial spray equipment as a preemergence and/or postemergence application at 
5.0 or more gallons per acre. 
Chemigation: Metribuzin 75 may be applied preemergence and/or early postemergence to potatoes using center pivot, solid set , 
and lateral roll systems. Apply specified dosage in 1/4 to 3/4 inch of water per acre (1/4 to 1/2 inch on sandy soil) as a cont inuous 
injection in self-propelled systems or apply in the last 15 to 30 minutes of the set in other systems. Be sure all the Metribuz in 75 
pounds per acre has been flushed from the lines before shutting down the system. 
Weeds Controlled 
Metribuzin 75 applied to potatoes according to directions, will provide economic control of the following weeds. For optimum co ntrol, 
applications should be made before weeds are 1 inch tall. (See NOTE) 
Broadleaves 
Carpetweed, common1 Mustard, Indian1 Pigweed, redroot1,2 Smartweed, Pennsylvania1,2 
Cocklebur, common1,2 Mustard, tansy1 Pigweed, smooth1,2 Sunflower, common3

29 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Jimsonweed1 Mustard, tumble1 Ragweed, common1,2 Thistle, Russian2 
Kochia3 Mustard, wild1 Sheperd’s-purse1 
Lambsquarters, common1,2 Pennycress, field1,2 Sicklepod1 
 
Grasses 
Barnyardgrass3 Foxtail, giant1 Johnsongrass, seedling1 
Crabgrass, large1 Foxtail, green1 Panicum, fall1 
Crabgrass, smooth1 Foxtail, yellow1 Signalgrass, broadleaf1 
1 Weeds controlled with preemergence applications. 
2 Weeds controlled with postemergence applications. 
3 Weeds requiring 2 applications for control. 
Hard To Control Weeds 
Although Metribuzin 75 may not provide commercially acceptable control in every instance, it will suppress growth of the follow ing 
weeds and reduce their competition with potato plants. 
Barnyardgrass Kochia Nightshade, hairy Purslane, common 
Grasses Nutsedge, yellow Sunflower, common 
 
Note: Where triazine-resistant weeds are present, Metribuzin 75 alone may not provide adequate control. 
Broadcast Applications 
Crop Metribuzin 75 (Lb/A) 
Potatoes 0.3 to 1.3 
Preemergence: Apply specified dosage as a broadcast spray. Do not mechanically incorporate into soil. Use the 0.3 to 0.6 pound 
per acre rate for control of Wild mustard (Brassica sp.) only. On sand soils or sensitive varieties, do not exceed 0.6 pound pe r acre. 
Potatoes 0.3 to 0.6 
(Except early maturing smooth skinned, red skinned, and other specified varieties.) 
Postemergence: Apply specified dosage as a broadcast spray over the tops of potato plants [Refer to Special Precautions 
(Potatoes)]. Use rates of 0.3 to 0.6 pound per acre for control of Redroot pigweed and Common lambsquarters only. Apply the 0.6 
pound per acre rate for control of other weeds listed on this label. 
 
Split Applications: This product may be applied once preemergence and once postemergence as directed above [Refer to Special 
Precautions (Potatoes)]. Do not exceed 1.3 pounds total per acre per season. 
 
Idaho, Oregon, And Washington Only: 2 postemergence applications can be made as broadcast sprays over the tops of potato 
plants if Metribuzin 75 is applied preemergence. Use 0.3 to 0.6 poun d per acre for control of Redroot pigweed and Lambsquarters 
only. On coarse (sandy) soils with low organic matter do not exceed 0.5 pound per acre per application. On medium and heavy soils 
only, use 0.6 pound per acre per application for control of other weeds listed on this label and for suppression of Hairy nightshade. 
Make the first application early in the season while weeds are still small. Allow at least 14 days before the second application. Do not 
apply after June 30 if treated land is to be planted to crops other than potatoes. 
 
Tank Mixes: Metribuzin 75 may be tank mixed with the following herbicides: Dual Magnum, Eptam®, Stealth and Matrix®. In 
addition, three-way tank mix combinations may be used for Metribuzin 75 plus Dual Magnum, Eptam or Stealth plus Matrix when 
applied preemergence. Refer to each product’s label for precautionary statements, restrictions, application information , and weeds 
controlled. 
Dual Magnum: Metribuzin 75 may be applied in a tank mix combination with Dual Magnum as a preemergence broadcast 
application. Apply Metribuzin 75 at 0.5 to 1.3 pounds and Dual Magnum at 1.0 to 2.0 pints per acre according to the respective labels 
for use of each product alone on potatoes. 
Eptam: Metribuzin 75 may be tank mixed with Eptam at rates and uses permitted on each product’s label. 
Stealth: Metribuzin 75 may be applied in tank mix combination with Stealth as a preemergence or early postemergence broadcast 
application. As a preemergence mix, apply Metribuzin 75 at 0.6 to 1.3 pounds and Stealth at 1.2 to 3.6 pints per acre. As an ea rly

30 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
postemergence spray, apply Metribuzin 75 at 0.3 to 0.6 pound and Stealth at 1.2 to 3.6 pints per acre before the crop is in the 6-inch 
growth stage. 
Matrix (except the following counties in Colorado): Alamosa, Conejos, Costilla, Rio Grande , and Saguache: Metribuzin 75 may be 
applied in tank mix combination with Matrix as a preemergence and/or early postemergence application for improved control on 
weeds such as Russian thistle, Kochia and Common lambsquarters. As a preemergence mix, apply Metribuzin 75 at 0.3 to 0.75 pound 
and Matrix at 1.0 to 1.5 ounces product per acre. As an early postemergence spray, apply Metribuzin 75 at 0.3 to 0.6 pound and Matrix 
at 1.0 to 1.5 ounces product per acre. Use a nonionic surfactant at a rate of 0.125% v/v (1.0 pint per 100 gallons of water). A pply 
before the crop exceeds 14 inches in height. Make postemergence applications of Matrix treatments prior to June 30. 
Restrictions (Potatoes): 
x Do not use Metribuzin 75 on pota toes in Kern County, California. 
x Do not apply more than a total of 1.3 pounds Metribuzin 75 per acre in a single crop season regardless of the method of applic ation. 
x Do not make postemergence applications prior to rainfall or irrigation on recently cultivated potatoes, nor within 3 days afte r 
periods of cool, wet cloudy weather or injury may occur. 
x Pre-harvest Interval (PHI): Do not apply Metribuzin 75 within 60 days of harvest. 
x Do not rotate any crop not listed on this label for 18 months following application. 
x Do not use air blast sprayers. 
x Do not apply to sweet potatoes or yams. 
x Do not plant sensitive crops such as onions, lettuce, cole cr ops and cucurbits during the next growing season following Metrib uzin 75 
application. 
Postemergence applications may cause some chlorosis or minor necrosis. These symptoms may be more severe if seed-piece 
decay is occurring or if growing conditions favor crop stress. 
Postemergence applications may be made only on russet or white skinned varieties that are not early maturing. 
Potato varieties may vary in their response to herbicide applicati ons. When using Metribuzin 75 for the first time on a particu lar 
variety, always determine crop tolerance before using on a field scale. 
Certain cereal varieties are sensitive to Metribuzin 75 (see cereal section of this label for sensitive varieties) and should n ot be 
planted 
during the next growing season unless the following cultural practices occur: 
1. Potato vines left in rows as a result of harvest must be uniformly distributed over the soil surface prior to plowing, and 
2. Plow with a moldboard plow to a depth sufficient to mix the upper 8 inches of soil. 
ALFALFA AND SAINFOIN 
Metribuzin 75 herbicide is labeled for use in alfalfa and sainfoin in the following areas: 
1. Alfalfa and sainfoin (including mixed stands with grasses) (all areas except California). 
2. Alfalfa and sainfoin (including mixed stands with grasses) (California only). 
3. Alfalfa - tank mix combination with Gramoxone Inteon (Colorado, Idaho, Montana, Nevada, Oregon, Utah, Washington, 
Wyoming, and the following California counties: Del Norte, Lassen, Modoc, Nevada, Plumas, Shasta, Sierra, and Siskiyou). 
4. Alfalfa - post dormant application of Metribuzin 75 impregnated on dry fertilizer only (Connecticut, Illinois, Indiana, Iowa, 
Kansas, Kentucky, Michigan, Minnesota, Nebraska, New Mexico, New York, Ohio, Oklahoma, Pennsylvania, South Dakota, 
Tennessee, Texas, and Wisconsin). 
5. Alfalfa - Non-Dormant, Non-Winter Hardy varieties (Arizona only). 
Metribuzin 75 may be used in aerial or ground spray equipment as a broadcast surface application to established crops of alfalf a 
and sainfoin for the control of certain grass and broadleaf weeds. 
 
Application: Refer to “Product Information” in the front of this label for detailed information on the application of Metribuzin 75. For 
information on applying Metribuzin 75 in fluid or on dry fertil izer refer to the “Application of Metribuzin 75 in Fluid Fertili zers” or 
“Commercial Impregnation and Application of Metribuzin 75 on Dr y Bulk Fertilizer” under the “Pr oduct Information” section of th is 
label. 
Restrictions (Alfalfa and Sainfoin): 
x Use Metribuzin 75 only on established alfalfa and sainfoin. 
x Do not apply Metribuzin 75 after growth begins in the spring or before growth ceases in the fall, except as specified on this label.

31 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
x Pre-harvest Interval (PHI): Do not graze or harvest within 28 days after application. 
For best weed control, apply Metribuzin 75 when weeds are less than 2 inches tall or before weed foliage is 2 inches in diamete r. 
Reduced weed control may occur when extended dry conditions follow application of Metribuzin 75. 
Crop injury may occur when: 
1. Crop is under stress conditions such as diseases, insect infestations, poorly drained soils, drought , or winter injury at 
time of application; 
2. Crop is treated within 12 months after seeding; 
3. There is excessive irrigation or rainfall immediately after application. Do not apply more than 0.5 inch of water in the first 
irrigation after Metribuzin 75 is applied. 
Alfalfa and Sainfoin 
(All Areas Except California) 
Broadcast Applications 
Crop Metribuzin 75 Lb/A 
Alfalfa and Sainfoin (Except California) 0.3 to 1.3 
Select the proper dosage according to weeds known to be and pres ent in field to be treated. On loamy sand soils in Oregon and 
Washington, do not apply more than 0. 6 pound of Metribuzin 75 per acre. 
For Use On Mixed Stands Of Alfalfa And Grasses 
Rates of 0.6 to 1.0 pound of Metribuzin 75 per acre will provid e partial reduction of forage grass stands. These rates may be u sed 
to reduce forage grass stands to prevent crowding out of al falfa. Higher rates will severely reduce forage grass stands. 
Do not use Metribuzin 75 on sand soils. In areas West of the Rocky Mountains, avoid using Metribuzin 75 on soils with calcareou s 
surface area, high levels of lime or sodium, or a pH greater than 8.2. 
Weeds Controlled (Except California) 
0.3 to 0.5 Lb Metribuzin 75/A 
Chickweed, common (Stellaria media) 
 0.5 to 0.6 Lb Metribuzin 75/A 
Cheat (Bromus secalinus) 
Deadnettle, purple (Lamium purpureum) 
Downy brome (Bromus tectorum) 
Japanese brome (Bromus japonicus) 
Pennycress (Thlaspi arvense) 
Rescuegrass (Bromus catharticus) 
Shepherd’s-purse (Capsella bursa pastoris) 
0.6 to 1.3 Lb Metribuzin 75/A 
Broadleaves 
Fleabane, rough (Erigeron strigosus) 
Flixweed (Descurainia sophia) 
Henbit (Lamium amplexicaule) 
Kochia (Kochia scoparia) 
Lambsquarters, common (Chenopodium album) 
Marestail (Horseweed) (Hippuris vulgaris) 
Meadow salsify (Tragopogon pratensis) 
Mustard, blue (Chorispora tenella) 
 
Mustard, Jim Hill (tumble) ( Sisymbrium altissimum) 
Mustard, tansy (Descurainia pinnata) 
Pepperweed (Lepidium virginicum) 
Pigweed, redroot (Amaranthus retroflexus) 
Prickly lettuce (Lactuca serriola) 
White cockle (Melandrium album) 
Wild buckwheat (Polygonum convolvulus) 
Yellow rocket (Barbarea vulgarius) 
Grasses 
Foxtail, green (Setaria viridis) 
Little barley (Hordeum pusillum) 
 
Smooth brome (Bromus inermis) 
Wild oats (Avena fatua) 
1.3 Lb Metribuzin 75/A 
Broadleaves 
Chickweed, mousear (Cerastium vulgatum) 
 
Dandelion (Taraxacum officinale) 
Ragweed, common (Ambrosia artemisiifolia) 
Grasses 
Barnyardgrass (Echinochloa crus-galli) 
Bluegrass (Poa annua) 
 
Foxtail barley (Hordeum jubatum)

32 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Weeds Partially Controlled: At the rate of 1.3 pound per acre Metribuzin 75 may be used to reduce the competition from curly dock 
(Rumex crispus). 
At 0.6 to 1.3 pound per acre, Metribuzin 75 may be used to reduce the competition of German moss or Knawel (Scleanthus annus). 
Alfalfa and Sainfoin (California Only) 
(Including Mixed Stands With Grasses) 
Metribuzin 75 may be used in aerial or ground spray equipment as a broadcast surface application to dormant established crops of 
alfalfa and sainfoin. 
Application: Metribuzin 75 may be used in aerial or ground spray equipment as a broadcast surface application to dormant 
established crops of alfalfa and sainfoin for control of certain grass and broadleaf weeds. Do not apply Metribuzin 75 after gr owth 
begins in the spring or before growth ceases in the fall. Do not apply to either alfalfa or sainfoin during the first growing s eason after 
seeding. 
For information on applying Metribuzin 75 in fluid fertilizer solutions to alfalfa, refer to the appropriate section of this label. 
For information on Commercial impregnation and application of Metribuzin 75 on dry bulk fertilizer, refer to the appropriate se ction 
of this label. 
Weeds Controlled 
0.5 to 0.6 Lb Metribuzin 75/A 
Cheatgrass (downy brome) 
(Bromus secalinus)
 
0.6 to 1.3 Lb Metribuzin 75/A 
Broadleaves 
Chickweed, Common (Stellara media) 
Flixweed (Descurainia sophia) 
Henbit (Lamium amplexicaule) 
Kochia (Kochia scoparia) 
Meadow salsify (Tragopogon pratensis) 
Mustard, blue (Chlorispora tenella) 
 
Mustard, tansy (Descurainia pinnata) 
Pepperweed, Virginia (Lepidium virginicum) 
Sheperd’s-purse (Capsella bursa-pastoris) 
White cockle (Melandrium album) 
Wild buckwheat (Polygonum convolvulus) 
Yellow rocket (Barbarea vulgaris) 
Grasses 
Smooth brome (Stellaria media) Wild oats (Avena fatua) 
1.3 Lb Metribuzin 75/A 
Broadleaves 
Dandelion (Taraxacum officinale) 
Grasses 
Barnyardgrass (Echinochloa crus-galli) 
Bluegrass (Poa annua) 
Foxtail barley (Hordum jubatum) 
 
Broadcast Applications 
Crop Metribuzin 75 Lb/A 
Alfalfa and Sainfoin (California Only) 0.5 to 1.3 
Select the proper dosage according to weeds known to be pr esent in the field to be treated. Apply specified dosage 
in 20.0 to 40.0 gallons of water per a cre with ground spray equipment or 3.0 to 10.0 gallons of water per acre with 
aerial spray equipment fi tted with nozzles suitable for broadcast appl ications of herbicides. Treat only dormant 
established crops of alfalfa and sainfoin. Injury may occur to alfalfa if Metribuzin 75 is applied earlier than 12 months 
after seeding. Do not apply after spring growth begins or before growth ceases in the fall. Pre-harvest Interval (PHI): 
Do not graze or harvest within 28 days after application. 
At the 1.3 pounds per acre rate, Metribuzin 75 may be used for suppression of Curly dock. 
 
For Use on Mixed Stands of Alfalfa and Grasses: Rates of 0.6 to 1.3 pound of Metribuzin 75 per acre will provide partial reduction of 
forage grass stands. These rates may be used to reduce forage grass stands to prevent crowding out of alfalfa. Higher rates will severely 
reduce forage grass stands. 
ALFALFA 
Metribuzin 75 plus Gramoxone Inteon Tank Mik 
Colorado, Idaho, Montana, Nevada, Oregon, Utah, Washington, Wyoming and the following California counties: Del Norte, 
Lassen, Modoc, Nevada, Plumas, Shasta, Sierra, and Siskiyou. 
Application: Metribuzin 75 plus Gramoxone Inteon tank mix application may be used, during the dormant season, in aerial or ground

33 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
spray equipment as a broadcast surface application to established (at least 1 year old) alfalfa for the control of certain gras s and 
broadleaf weeds. Do not apply Metribuzin 75/Gramoxone Inteon tank mix to regrowth (after grazing or cutting) that is more than 2 
inches tall. Apply once per season. Do not apply following cuttings during growing season. Use a minimum of 10.0 gallons of wat er 
per acre with aerial spray equipment and a minimum of 20.0 gallons of water per acre with ground spray equipment. Add a non-ion ic 
spreader at label rates to the spray solution. 
 
Restrictions (Alfalfa): 
x Do not apply Metribuzin 75/Gramoxone Inteon tank mix to regrowth (after grazing or cutting) that is more than 2 inches tall. 
x Apply once per season. 
x Do not apply following cuttings during growing season. 
Weeds Controlled: Metribuzin 75 plus Gramoxone Inteon (1.5 to 2.5 pint per acre) tank mix application will control established 
weeds. Gramoxone Inteon controls weeds by contact activity. 
 
0.3 to 0.5 Lb of Metribuzin 75/A 
Common Chickweed 
0.5 to 1.0 Lb of Metribuzin 75/A 
Bluegrass 
Cheat 
Downy brome 
Field pennycress 
Henbit 
Japanese brome 
Rescuegrass 
Shepherd’s-purse 
Use Metribuzin 75 at 0.6 to 1.0 Lb/A for control of the following weeds: 
Blue mustard Marestail (Horseweed) Smooth brome 
Common lambsquarters Meadow salsify Sow thistle 
Flixweed Pepperweed Tansy mustard 
Green foxtail Prickly lettuce White cockle 
Groundsel Redroot pigweed Wild oats 
Jim Hill mustard Rough fleabane Wild buckwheat 
Kochia Ryegrass Yellow rocket 
Little barley 
Applications 
Dosage/A 
Metribuzin 75 
0.3 to 1.0 lb 
Plus 
Gramoxone Inteon 
1.5 to 2.5 pt 
Apply specified dosages of Metribuzin 75 and Gramoxone Inteon in at least 10.0 gal of 
water/A with aerial equipment or at least 20.0 gal of water/A with ground equipment. 
Do not apply this tank mix to alfalfa growth if more than 2 inches tall. For best weed control, 
apply when broadleaf weeds and grasses are 1 to 6 inches tall and are actively growing. 
Care 
should be taken to avoid overlaps. Do not apply more than 0.6 lb of Metribuzin 75/A on 
loamy sand soils. 
Reduced weed control may occur when extended dry conditions follow application of 
Metribuzin 75. Crop injury may occur if alfalfa is under stress conditions such as diseases, 
insect infestations, drought or winter injury or if Metribuzin 75 is applied to alfalfa earlier than 
12 months after seeding. 
 
For Use on Mixed Stands of Alfalfa and Grasses: Rates of 0.6 to 1.0 pound of Metribuzin 75 per acre will provide partial reduction of 
forage grass stands. These rates may be used to reduce forage grass stands to prevent crowding out of alfalfa. 
Pre-harvest Interval (PHI): Do not graze or harvest within 42 days after application. 
In areas west of the Rockies, do not use Metribuzin 75 on soils with calcareous surface, soils with high levels of lime or sodi um and 
with a pH greater than 8.2. 
Do not use on sand soil. 
Refer to the Gramoxone Inteon label for additional directions, weed species controlled and precautions. 
Post-Dormant Application of Metribuzin 75 Impregnated on Dry Fertilizer Only 
Metribuzin 75 may be applied after dormancy has broken, but prio r to 3 inches of new alfalfa shoot growth, only when impregnate d 
on dry fertilizer in Connecticut, Illinois, Indiana, Iowa, Kansas, Kentucky, Michigan, Minnesota, Nebraska, New Mexico, New Yor k, 
Ohio, Oklahoma, Pennsylvania, South Dakota, Tennessee, Texas , and Wisconsin. Apply at rates of 1.0 to 1.3 pound per acre as directed 
on this label for application during dormancy. Apply only when alfalfa foliage is dry or crop injury may occur. When using this application 
method, do not harvest or graze treated alfalfa for 60 days after application.

34 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Alfalfa 
Non-Dormant, Non-Winter Hardy 
Varieties (Arizona Only) 
Metribuzin 75 may be used as a broadcast surface application to established crops of non-dormant alfalfa varieties for preemerg ence and 
postemergence control of certain winter annual weeds following either a fall or winter sheep grazing/green-chop harvest. 
 
Weeds Controlled: 
Field pepperweed Mouse barley 
Lambsquarters Nettleleaf goosefoot 
Little mallow (cheeseweed) Shepherd’s-purse 
Littleseed canarygrass Silversheath knotweed 
London rocket (mustard) Spiny sowthistle 
Prickly lettuce 
 
Applications 
Crop 
Alfalfa 
Non-dormant, Non-winter Hardy Varieties 
Metribuzin 75 Lb/A 
0.5 to 0.6 lb/A 
Apply speci fied dosage by aerial or ground spray equipment in 7.0 to 40.0 gallons of water per acre. Treat established alfalfa 
stubble after fall or winter sheep grazing or green-chop harvest and prior to the time regrowth is 2 inches tall. Alfalfa foliage present 
at time of application can exhibit yellowing. Injury may occur to alfalfa in areas of high salt concentration where the crop is stunted 
and/or has a poorly developed root system, or if alfalfa is under stressed growing conditions such as diseases, insect infestations, 
or drought. For most effective postemergence weed control, trea tment should be made before weeds are 2 inches tall or before 
leaf rosettes are 2 inches wide. For maximum control, ra infall (0.25 inches or more) or irrigation is necessar y within 30 days of 
treatment, however, do not flood irrigate within 2 days after treatment. Use 0. 5 pound Metribuzin 75 on sand soil when only 
Mustard, Goosefoot, Lambsquarters, or Canary grass are the weeds to be controlled. 
Restrictions: 
x Do not apply earlier than 6 months after seeding. 
x Pre-harvest Interval (PHI): Do not graze or harvest within 28 days after application. 
 
APARAGUS 
(Established) 
Metribuzin 75 may be used in ground spray equipment or sprinkler irrigation (center pivot, lateral move, or solid set) systems as a 
single preemergence broadcast application or as a split application consisting of a preemergence broadcast application followed by 
a post-harvest broadcast application. 
Refer to the “Product Information” section of this label for directions. 
Weeds Controlled: Metribuzin 75, applied to established asparagus according to directions, will effectively control: 
Broadleaves 
Chickweed, common (Stellaria media) 
Jimsonweed (Datura Stramonium) 
Lambsquarters (Chenopodium album) 
Pigweed, redroot (Amaranthus retroflexus) 
Ragweed, common (Ambrosia artemisiifolia) 
Smartweed, Pennsylvania (Polygonum pensylvanicum) 
Sorrel, red (Rumex acetosella) 
Velvetleaf (Abutilon theophrasti) 
 
Grasses 
Crabgrass (Digitaria spp.) 
Foxtails (Setaria spp.) 
 
Sandbur, field (Cenchrus pauciflorus)

35 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Broadcast Applications 
Crop Metribuzin 75 Lb/A 
Asparagus 
(preemergence 
application only) 
1.3 to 2.6 
Preemergence Application Only: Make a single surface application in early spring before 
asparagus spears or ferns emerge. If the field is to be disked, apply Metribuzin 75 after disking 
but before the crop emerges. Use the lower rate for control of the broadleaf weeds listed above. 
Use the higher rate in fields with a history of severe infestations of grasses and for maximum 
residual control. Pre-harvest Interval (PHI): Do not apply within 14 days of harvest. 
Asparagus 
(split 
application) 
 
 
0.6 to 1.3 preemergence 
plus 
1.3 to 2.0 post-harvest 
Split Application 
Preemergence And Post Harvest: Preemergence Application: Apply before asparagus spears 
or ferns emerge. If the field is to be disked, apply after disking but prior to crop emergence. Pre-
harvest Interval (PHI): Do not apply within 14 days of harvest. 
Post Harvest Application: Apply after last harvest of the season but prior to emergence. The lower 
combination rates may be used for control of Common ragweed, Lambsquarters, Redroot pigweed 
and Red sorrel. Use the higher combination rates for other weeds listed or in fields with severe 
grass infestations or for maximum post harvest control of emerged weeds. 
Important: The total amount of Metribuzin 75 applied in one crop season may not exceed 2.6 pound per acre. 
 
Restrictions (Asparagus): 
x Aerial application is prohibited. 
x Do not use on newly seeded asparagus nor on young plants during the first growing season after setting crowns. 
x Do Not Apply Post Harvest Applications Until After The Last Harvest Of Spears . 
CARROTS 
Special Conditions of Sale Provision for Use on Carrots: The following directions for use were developed under the direction of 
IR-4 (government minor crops use program). Buyer is advised that Loveland Products, Inc. makes no assurances regarding 
satisfaction with the product and to the extent consistent with applicable law all risks of crop injury or product performance are 
assumed by the Buyer.
 
Apply Metribuzin 75 herbicide with ground equipment as specified below under “Applications.” For effective control of broadleaf 
weeds with postemergence applications, apply Metribuzin 75 before weeds are 1 inch in height or diameter. Thorough spray coverage is 
essential for adequate weed control. 
Refer to the appropriate section of this label for additional information regarding spray equipment, dilution rates, mixing, sp rayer 
cleanup, restrictions, container disposal, and cautions. 
Refer to “Mixing” under the “Product Information” section in the front of this label. 
For specific application information see “Product Information” and “Application” sections at the front of this label.

36 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Weeds Controlled: Metribuzin 75 applied to carrots according to directions will effectively control: 
Carpetweed (Mullugo verticillata) 
Galinsoga (Galinsoga parviflora) 
Horseweed (Conyza canadensis) 
Lambsquarters, Common 
 (Chenopodium album) 
Mustard, wild (Sinapis arvensis) 
Pigweed, redroot (Amaranthus retroflexus) 
Pigweed, smooth (Amaranthus hybridus) 
Pineappleweed (Matricaria matricarioides) 
Prickly lettuce (Lactuca serriola) 
Shepherd’s-purse (Capsella bursa-pastoris) 
 
Applications 
Crop Metribuzin 75 Lb/A 
Carrots 0.3 
Apply specified dosage per acre as a broadcast spray over the 
tops of carrot plants. Make 
application after carrots have formed 
5 to 6 true leaves but before weeds are 1 inch in height or 
diameter. 
If needed, a second application may be made after an interval 
of at least 3 weeks. 
Pre-harvest Interval (PHI): Application may be made up to 60 
days of harvest. 
Important: The total amount of Metribuzin 75 applied in 1 crop season must not exceed 0.6 pound per acre. 
Restrictions (Carrots): 
x Do not apply to carrots grown for seed. 
x Do not apply within 3 days after periods of cool, wet , or cloudy weather or crop injury will occur. 
x Do not apply Metribuzin 75 within 3 days of any other chemical unless specified on this label. 
x Do not apply on very hot days or excessive crop injury will result. 
x Do not apply until carrots have at least 5 to 6 true leaves. Earlier applications will result in excessive crop damage. 
x Do not use air blast or other high-pressure spray equipment to make postemergence applications of Metribuzin 75. 
Crop injury or delayed maturity may result from applications of Metribuzin 75 if carrots are growing under stress conditions su ch as 
periods of drought or cool, wet , and cloudy weather preceding application. 
Following an application of Metribuzin 75, chlorosis (yellowing) and burning of the leaf tissue may occur. 
For newly introduced varieties of carrots with unknown tolerance to Metribuzin 75, treat only a small area to determine if Metr ibuzin 
75 can be used without injury to the crop. 
FIELD CORN 
Postemergence Application 
Metribuzin 75 may be used for control of selected broadleaf weeds when applied as a tank mix combination with certain broadleaf 
herbicides presently registered for post-emergence use in field corn. Herbicides which may be tank mixed with Metribuzin 75 
include: 
2,4-D Buctril® Laddok® S-12 Rifle 
Atrazine 
Basagran® 
Buctril + atrazine (Premix) 
Clarity 
Pursuit* 
Resource® 
Rifle Plus 
*Use only on Pursuit resistant/tolerant corn hybrids (IMI-Corn®). 
 
Application: Metribuzin 75 may be applied to field corn after crop emer gence until just prior to tasseling. Broadcast applications 
may be made with ground or aerial equipment. For optimum weed control, apply treatments when weeds are small and actively 
growing, but before reaching the maximum heights listed in the Weeds Controlled table. 
Postemergence Broadcast Application 
Ground Application: Adjust nozzle height above crop and weed canopy to ensure uniform spray coverage. Increase gallonage with 
increasing weed size and population density. 
For tank mixes of Metribuzin 75 plus atrazine, Basagran, Laddok S-12, Buctril, Buctril + atrazine, Pursuit, Resource, or 2,4-D amine 
formulations, use flat fan nozzles spaced a maximum of 20 inches apart. Best results are achieved using a minimum spray volume 
of 10.0 gallons per acre and spray pressure from 20 to 40 psi.

37 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
For Metribuzin 75 tank mixes with Clarity, Rifle, Rifle Plus, or 2,4-D low volatile ester formulations, use drift-reducing nozz les which 
are specifically designed to produce coarse sprays and reduce the amount of driftable fines. Additional measures which will hel p 
avoid potential drift to sensitive crops and plants include using a minimum spray volume of 20.0 gallons per acre and keeping s pray 
pressures at or below 20 psi unless otherwise specified by the nozzle manufacturer. 
For further precautions and additional instructions and recommendations, consult the tank mix partner’s label. 
Aerial Application: Apply in a minimum spray volume of 3.0 gallons per ac re. For optimum spray coverage and distribution, use a 
minimum of 5.0 gallons per acre and a maximum pressure of 40 psi. Use a boom and nozzle configuration which will provide a 
uniform deposition pattern and coverage with low drift potential. Avoid overlaps to prevent potential crop injury. Do not apply near 
sensitive crops or sensitive plants growing near the treated area. Do not apply when wind speed is greater than 10 mph or when 
winds are moving toward sensitive crops or plants. To avoid dri ft hazards, applicator must follow the most restrictive labeling of the 
products used in a tank mix. Refer to the appropriate tank mix partner’s label for further precautions and recommendations. 
Post Directed Application 
Metribuzin 75 in tank mix combinations with 2,4-D, Buctril or Rifle may be applied post directed to field corn. Use drop nozzle s and 
appropriate spacing to direct spray below the corn whorl and upper leaves. The top of the target weed canopy must be sufficient ly 
below the whorl and upper leaves of the crop to permit this application and provide adequate spray coverage. The height differe ntial 
required between the crop and weed canopy will depend on the specific equipment used. Apply before tassel emergence. For further 
precautions and additional recommendations, refer to the appropriate tank mix partner’s label. 
Adjuvants 
The adjuvant types listed below may be utilized with certain Metribuzin 75 tank mix combinations. Consult the tank mix section for 
the appropriate adjuvant and rate. Use of other adjuvants or rates not listed on this label may result in severe leaf burn, crop stunting, 
and/ or stand reduction. Use only adjuvants which are ex empt from tolerance requirements under 40 CFR 180.1-001. 
UAN (urea ammonium nitrate) is commonly referred to as 28, 30, or 32% N. 
Ammonium sulfate (spray grade) may be used as an alternative to UAN with certain tank mix combinations. 
Non-ionic surfactants should contain at least 80% active ingredient. 
DO NOT USE crop oil concentrate (COC) or any adjuvant containing vegetable or petroleum oils with any Metribuzin 75 tank mixtures 
as severe leaf burn, crop stunting, and/or stand reductions may occur. 
Rainfastness 
Metribuzin 75 will not reduce rainfastness of the listed tank mix partners. Refer to the individual product labels for rainfast ness 
recommendations. 
Sprayer Cleanup 
Refer to each tank mix partner’s label and the Sprayer Cleanup se ction of the Metribuzin 75 label for specific instructions on cleaning 
spray equipment. Special attention should be given to the requir ed cleanup procedures for 2,4-D, Clarity, Rifle and Rifle Plus. 
Restrictions: 
x Do not use on corn grown for seed, sweet corn, popcorn, or white corn. 
x Do not apply more than 0.25 pound active ingredient metribuzin (5.3 ounces Metribuzin 75) per acre per use season. 
x Do not apply when field corn is under stress (see Stress statement below). 
x Do not use aerial applications if sensitive crops or plants are growing in the vicinity of the area to be treated. 
x Do not allow spray drift onto sensitive crops or plants. 
x Do not use on sand, loamy sand or sandy loam soils that have less than 0.5% organic matter. 
x Do not use on sand or loamy sand soils in Wash ington, Oregon or Idaho or crop injury may occur. 
x Observe all precautions and limitations on labeling of all products used in the tank mixtures. 
 
Stress is any condition or combination of conditions which impairs normal crop growth. Weather, disease, insect damage, fertility , 
or other factors may cause stress. Applications made before or after the corn is under stress from these factors or from period s of 
prolonged cool, wet , and cloudy weather or widely fluctuating day and nighttime temperatures, may result in temporary leaf burn, 
yellowing and/ or stunting of the crop. Recovery from damage is generally rapid with no lasting effects on new growth. Under extreme 
stress, stand reductions may occur. 
Feeding Restrictions: Pre-harvest Interval (PHI): Field corn treated with Metribuzin 75 may be grazed or harvested for silage or

38 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
grain 60 days after treatment. Follow the most restrictive preharvest interval on the labels of the products used in the tank m ixtures. 
 
Tank Mix Combinations 
The Metribuzin 75 tank mixtures listed below can be ut ilized for control of certain annual broadleaf weeds. 
Metribuzin 75 Postemergence Broadcast Directions 
Product Rate Directions And Remarks* 
Metribuzin 75 2.0 oz/A Apply as a broadcast spray during the interval from corn emergence until corn is 
+ + 8 inches tall. Apply only to varieties known to be tolerant to 2,4-D. 
2,4-D Amine 0.5 to 1.0 pt/A1 DO NOT USE ADJUVANTS. 2,4-D may cause injury to nearby sensitive crops. 
or or 2,4-D applications may result in brittle corn stalks and winds or cultivation may 
2,4-D EHE 0.3 to 0.5 pt/A1 cause stalk breakage. To reduce damage, delay cultivation 8 to 10 days after 
application. 
Metribuzin 75 2.0 oz/A Apply as a broadcast spray during the interval from corn emergence until corn is 
+ + 12 inches tall. A non-ionic surfactant (1.0 qt/100 gal of spray solution) may be 
Atrazine 0.5 to 1.5 lb AI/A added to improve weed control. Atrazine is a restricted use herbicide. Follow all 
 state and federal label recommendations and restrictions pertaining to atrazine 
applications. 
Metribuzin 75 2.0 oz/A Apply as a broadcast spray during the interval from corn emergence through the 
+ + 5-leaf stage or when corn is 8 inches tall, whichever occurs first. For Rifle 
Rifle 0.5 to 1.0 pt/A applications to corn greater than 8 inches in height, consult the Rifle label for 
or or use rates and restrictions. If growing conditions are dry and plants are stressed, 
Clarity 0.5 to 1.0 pt/A addition of a non-ionic surfactant (1.0 qt/100 gal of spray solution) may improve 
 weed control. For corn grown on coarse, textured soils, apply Rifle or Clarity at 
 0.5 pt/A, regardless of application method. Application may cause injury to 
 nearby sensitive crops or plants. Application may result in temporary leaning of 
 corn plants. Delay cultivation until plants return to normal growth patterns to 
avoid stalk breakage. 
Metribuzin 75 2.0 oz/A Apply as a broadcast spray after corn emergence but before corn exceeds 30 
+ + inches in height and the crop canopy closes the row. Adjuvants such as UAN 
Basagran 1.0 pt/A (0.5 to 1.0 gal/A), ammonium sulfate (17.0 lb/100 gal of spray solution), or 
 non-ionic surfactant (1.0 qt/100 gal of spray solution) may improve weed 
control. 
Metribuzin 75 1.6 to 2.0 oz/A Apply as a broadcast spray when corn is in the fourth true leaf stage or later but 
+ + before the crop canopy closes the row. DO NOT USE ADJUVANTS. Occasionally 
Buctril 1.0 pt/A temporary corn leaf burn may occur and is similar to that observed from liquid 
 fertilizers. Recovery is generally rapid with no lasting effect. To reduce potential 
 for crop damage, make application to dry corn foliage when weather conditions 
are not extreme. 
Metribuzin 75 1.6 to 2.0 oz/A Apply as a broadcast spray during the interval from corn emergence until corn is 
+ + 12 inches tall. DO NOT USE ADJUVANTS. Occasional temporary corn leaf burn 
Buctril 1.5 to 2.0 pt/A may occur and is similar to that observed from liquid fertilizers. Recovery is 
+ 
atrazine (premix) 
 generally rapid with no lasting effect. To reduce potential for crop damage, make 
application to dry corn foliage when weather conditions are not extreme. 
Metribuzin 75 2.0 oz/A Apply as a broadcast spray after corn emergence until the corn is 12 inches tall. 
+ + Adjuvants such as UAN (0.5 to 1.0 gal/A) may increase weed control. 
Laddok S-12 1.33 to 1.66 pt/A Laddok S-12 contains atrazine, and is a restricted use product. Follow all state 
and Federal label recommendations and restrictions pertaining to atrazine. 
Metribuzin 75 2.0 oz/A Apply as a broadcast spray during the interval from corn emergence through the 
+ + 5-leaf stage or when corn is 8 inches tall, whichever occurs first. DO NOT USE 
Rifle Plus 1.5 to 2.0 pt/A ADJUVANTS. Application may cause injury to nearby sensitive crops or plants. 
 Application may result in temporary leaning of corn plants. Delay cultivation until 
 plants return to normal growth patterns to avoid stalk breakage. Rifle Plus 
 contains atrazine and is a restricted use product. Follow all state and federal label 
 recommendations and restrictions pertaining to atrazine.

39 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Metribuzin 75 2.0 oz/A Use only on designated IMI-Corn hybrids (hybrids which are resistant/tolerant to 
+ + Pursuit). Apply the 4.0 oz rate of Pursuit if grasses are present or broadleaf 
Pursuit 2.0 to 4.0 oz/A weeds are near the maximum heights shown. Apply in combination with a 
non-ionic surfactant (1.0 qt/100 gal of spray solution) and UAN (1.0 to 2.0 qt/A). 
Metribuzin 75 3.0 fl oz/A Apply as a broadcast spray to field corn from 2-leaf through 10-leaf (visible leaf 
+ + collars) stage. Adjuvants such as nonionic surfactant (0.25% v/v), UAN (2% v/v) 
Resource 4.0 to 6.0 fl oz/A or ammonium sulfate (2.5 lb/A) may increase weed control. 
*Consult the appropriate tank mix partner’s label for additional recommendations or restrictions. The most restrictive labeling applies to 
tank mixes with Metribuzin 75. 
1Application rate is based on, but not restricted to, 4.0 pounds active ingredient per gallon of 2,4-D. 
Metribuzin 75 Post Directed Directions 
Product Rate Directions And Remarks* 
Metribuzin 75 2.0 to 3.0 oz/A For corn greater than 8-inches tall, apply as a directed spray with drop nozzles 
+ + before tassel emergence. Apply only to varieties known to be tolerant to 2,4-D. 
2,4-D Amine 0.75 to 1.5 pt/A1 DO NOT USE ADJUVANTS. 2,4-D may cause injury to nearby sensitive crops. 
or or 2,4-D applications may result in brittle corn stalks and winds or cultivation may 
2,4-D EHE 0.5 to 0.75 pt/A1 cause stalk breakage. To reduce damage, delay cultivation 8 to 10 days after 
application. 
Metribuzin 75 2.0 to 3.0 oz/A For corn 8 to 36 inches tall, apply as a directed spray with drop nozzles. 
+ + Application may be made up to 15 days prior to corn tasseling. If growing 
Rifle 0.5 pt/A conditions are dry and plants are stressed, addition of a non-ionic surfactant 
 (1.0 qt/100 gal of spray solution) may improve weed control. For corn grown on 
 coarse textured soils, apply Rifle at 0.5 pt/acre, regardless of application method. 
 Application may cause injury to nearby sensitive crops or plants. Application 
 may result in temporary leaning of corn plants. Delay cultivation until plants 
return to normal growth patterns to avoid stalk breakage. 
Metribuzin 75 
+ 
2.0 to 3.0 oz/A 
+ 
Apply as a directed spray with drop nozzles before tassel emergence. DO NOT 
USE ADJUVANTS. Occasional temporary corn leaf burn may occur and is 
similar to that observed from liquid fertilizers. Recovery is generally rapid with 
Buctril 1.0 to 1.5 pt/A no lasting effect. To reduce potential for crop damage, make application to dry 
 corn foliage when weather conditions are not extreme. 
*Consult the appropriate tank mix partner’s label for additional recommendations or restrictions. The most restrictive labeling applies to 
tank mixes with Metribuzin 75. 
1 Application rate is based on, but not restricted to, 4.0 pounds active ingredient per gallon of 2,4-D.

40 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Weeds Controlled - Postemergence Broadcast Application 
These tank mixtures with Metribuzin 75 will control the following annual weeds up to the maximum weed heights listed: 
Metribuzin 75+ 
Buctril / 
Atrazine 
Rifle / 
Clarity 
Buctril 
Basagran + atrazine 2,4-D Rifle Plus Pursuit Laddok S-12 Resource 
COMMON WEED 
NAME 
 
MAXIMUM WEED HEIGHT IN INCHES* 
 
Amaranth, Palmer 4a 4 2a 4a 4 4 8b 6 4 
Buckwheat, wild 3 3 3 3 2 3 2 3 4 
Buffalobur 4 4 4 4 1 
Burcucumber 4 4 2 4 
Carpetweed 2 2 2 2 2 2 2 3 
Cocklebur, common 8 8 8 8 8 8 8 8 3 
Eclipta 3 3 3 3 3 3 3 
Henbit 3 3 2 2 2 4 3 3 
Horseweed/marestail 3 4 1 1 3 6 2 3 
Jimsonweed 5 5 6 5 5 5 5 6 3 
Knotweed 6 6 6 4 2 6 4 6 
Kochia 2a 2 1a 2a 2a 2 2 2a 
Ladysthumb 6 6 6 6 4 6 4 6 4 
Lambsquarters, common 6a 6 1 6 6 6 4 5 4 
Lettuce, prickly 4 4 3 4 5 3 
Mallow, Venice 2 2 2 2 2 2 2 4 
Morningglory, entire leaf 3 3 1 3 3 3 2 2 
Morningglory, ivyleaf 3 3 1 3 3 3 2 2 
Morningglory, pitted 3 3 1 3 3 3 2 2 
Morningglory, tall 3 3 1 3 3 3 2 2 
Mustard, tansy 4 4 4 4 4 4 4 4 
Mustard, wild 4 4 4 4 4 4 4 4 
Nightshade, black 6 6 6 1 6 3 1 
Nightshade, eastern black 6 6 6 1 3 1 4 
Pigweed, redroot 6a 6 2a 6a 6 6 8b 6a 4 
Pigweed, smooth 6a 6 2a 6a 6 6 8b 6a 4 
Poorjoe 3 3 3 3 3 3 3 3 
Purslane, common 1 3 4 1 
Pusley, Florida 3 3 3 3 3 3 3 3 
Ragweed, common 5 5 3 5 5 6 3 4 3 
Ragweed, giant 4 5 2 4 3 6 4 4 
Sickelpod 3 3 3 3 3 3 3 3 
Sida, prickly 1 1 3 1 1 2 1 2 2 
Smartweed, Pennsylvania 6 6 6 6 4 6 4 6 4 
Sunflower, common 6 6 6 6 6 6 5 6 
Thistle, Russian 1 3 3 1 3 1 1 
Velvetleaf 6a 6 6 6 4 6 5 6 6 
Waterhemp, spp. 5a 5 2a 5a 5 5 4b 2a 4 
*When weeds are approaching the maximum height listed or are found in high densities, use the higher rate of Metribuzin 75 and 
the selected tank mix partners. 
 
a These treatments will not control triazine resistant biotypes. 
b These treatments will not control ALS resistant biotypes.

41 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
WEEDS CONTROLLED - POST DIRECTED APPLICATION 
These tank mixtures with Metribuzin 75 will control the following annual weeds up to the maximum heights listed: 
Metribuzin 75 + 
COMMON WEED NAME 2,4-D Rifle Buctril 
MAXIMUM WEED HEIGHT IN INCHES* 
Amaranth, Palmer 12 12 6 
Cocklebur, common 12 12 12 
Jimsonweed 12 10 10 
Ladysthumb 6 8 6 
Lambsquarters, common 12 12 10 
Morningglory, entire leaf 18 18 6 
Morningglory, ivyleaf 18 18 6 
Morningglory, pitted 18 18 6 
Morningglory, tall 18 18 6 
Nightshade, black 10 8 8 
Nightshade, eastern black 10 8 8 
Pigweed, redroot 12 12 6 
Pigweed, smooth 12 12 6 
Ragweed, common 8 8 8 
Ragweed, giant 12 12 8 
Smartweed, Pennsylvania 6 8 6 
Sunflower, common 12 12 12 
Velvetleaf 10 8 8 
Waterhemp, tall 12 12 6 
*When weeds are approaching the maximum height listed or found in high densities, use the higher rate of Metribuzin 75 and the 
selected tank mix partners. 
 
PERENNIAL WEED SUPPRESSION 
The following Metribuzin 75 tank mixtures will provide top growth burndown and in season suppression of the following perennial 
weeds; however, regrowth may occur. For the best performance on these weeds, use the maximum rates of Metribuzin 75, Buctril, 
Buctril + atrazine, Clarity, Rifle, Rifle Plus, 2,4- D EHE or Pursuit specified for these tank mixtures. 
METRIBUZIN 75 + Clarity or Rifle 
Bindweed, field; Dandelion, common; Dock, curly; Smartweed, swamp; Thistle, Canada. 
METRIBUZIN 75 + Buctril or Buctril + atrazine 
Thistle, Canada. 
METRIBUZIN 75 + 2,4-D EHE 
Bindweed, field; Dandelion, common; Dock, curly; Smartweed, swamp; Thistle, Canada. 
Metribuzin 75 + Pursuit 
Thistle, Canada. 
PREPLANT AND PRE-EMERGENCE 
Illinois, Indiana, Iowa, Kansas, Kentucky, Michigan, Minnesota, Missouri, Nebraska, Ohio, South Dakota and Wisconsin 
 
Metribuzin 75 may be used for additional residual control of certain broadleaf weed species in corn when applied as a 
tank mix combination with both grass and broadleaf herbicides registered and labeled for use in field corn. Metribuzin 
75 can be tank mixed with the following herbicides: 
Alachlor Clarity Linex Rifle 
Atrazine Dual Magnum Linuron Rifle Plus 
Bicep II Magnum Dual II Magnum Lorox Simazine 
Bicep Lite II Magnum Guardsman Max Pentagon® Stealth 
Bullet Harness Extra Pursuit* Topnotch 
Cadence Lariat Pursuit Plus* 
*Use only on Pursuit resistant/tolerant corn hybrids (IMI corn).

42 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Application: Metribuzin 75 may be applied to field corn preplant without incorporation up to 30 days prior to planting or 
preemergence. Applications may be made by either ground or aerial equipment. For tank mixes, follow the most restrictive application 
methods of all products used. 
Restrictions: 
• Do not apply more than 5.33 ounces Metribuzin 75 (0.25 pound active ingredient) per acre per growing season. 
• Do not apply on soils having pH 7.0 or greater. 
Precautions: 
• Corn seed should be planted a minimum of 1-1/2 inches deep. 
• Metribuzin 75 may only be used in hybrid seed corn production fi elds if both inbred parents are known to be tolerant to Metribu zin 75. 
• Do not use on muck soils as reduced weed control may result. 
• Observe all precautions and limitations on labeling of all products used in tank mixes. 
Feeding restrictions: Corn treated with Metribuzin 75 may be harvested for silage or grain 60 days after treatment. For tank mixes, follow 
the most restrictive preharvest interval of all products used. 
Weeds controlled: Metribuzin 75 will aid in the residual preemergence control of the following weed species when tank mixed with other 
registered grass and/or broadleaf corn herbicides: 
Horseweed/marestail Smartweed, Pennsylvania 
Ladysthumb Sunflower 
Lambsquarters, common Velvetleaf 
Pigweed spp. Waterhemp, Tall 
Ragweed, common 
*For control of emerged weeds refer to the “Burndown Weed Control” section of the Metribuzin 75 label. 
 
Metribuzin 75 Field Corn Rate Directions 
States Application Timing Metribuzin 75 Oz/A 
Iowa 
Kansas 
Missouri 
Nebraska 
South Dakota 
Preplant 
(0 to 30 days) 
Preemergence 
2.0 to 5.33 
Illinois 
Indiana 
Kentucky
 
Michigan 
Minnesota 
Ohio 
Wisconsin 
Preplant 
(10 to 30 days) 
2.0 to 5.3 
 
Preplant 
(0 to 9 days) 
Preemergence 
2.0 to 4.0 
Remarks: Apply as a broadcast spray prior to corn emergence from the soil. 
Restrictions: 
• Do not apply Metribuzin 75 on coarse textured soils with less than 1.5% organic matter. 
• Do not apply more than 4.0 ounces Metribuzin 75 per acre on so ils with less than 2.0% organic matter. For heavy weed infestatio ns 
and/or early preplant applications, use the higher rates of Metr ibuzin 75. Consult the label of herbicide tank mix partners to determine 
proper use rates for the other product(s). 
GARBANZO BEANS (Chickpeas) 
(California, Idaho, Oregon and Washington) 
Special Conditions of Sale for Use on Garbanzo Beans (Chickpeas): The following directions for use were developed under the direction 
of IR-4 (government minor crops use program). Buyer is advised that Loveland Products, Inc. makes no assurances regarding 
satisfaction with the product and that to the extent consistent with applicable law all risks of crop injury or product perform ance are 
assumed by the Buyer. 
Metribuzin 75 herbicide may be used as a preemergence application for the suppression of certain broadleaf weeds in garbanzo beans.

43 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
WEEDS SUPPRESSED*: 
Common chickweed Dog fennel (Mayweed) Henbit Shepherd’s-purse 
Common lambsquarters Field pennycress Pigweed Wild mustard 
*Suppression is a reduction in weed size and growth compared to a non-treated area in the same field. Metribuzin 75 used alone will not 
control triazine-resistant weed species. 
Broadcast Applications 
Crop Metribuzin 75 Lb/A 
Garbanzo beans 0.3 to 0.5 
 Apply specified dosage in a single preemergence application using 10.0 to 40.0 gal of 
water/A with ground spray equipment. Apply before or after planting but before crop 
emergence. Thorough incorporation, either by rainfall or by mechanical means, is essential 
for weed suppression. Under dry conditions, incorporate Metribuzin 75 into the top 1 to 2 
inches of soil with spike harrows, or similar shallow incorporation equipment, then cross 
harrow to insure uniform soil incorporation. Where soil surface is moist at the time of 
application and rain follows before weed emergence, a broadcast application should provide 
adequate weed suppression. 
Use on coarse-textured soils, sandy soils , or any soil with less than 1.5% organic matter will 
likely cause crop injury. Use the higher rate on fine textured soils (high in clay or organic 
matter) and in fields with a history of high weed populations. 
Restrictions: 
• Crop injury may result if crop is under stress conditions caused by cold weather, poor soil fertility, diseases , or insect damage. 
• Do not use on clay knobs or poorly covered subsoils. 
• Do not apply preemergence on shallow seedlings less than 2 inches deep. 
• Do not graze or feed treated vines to livestock within 40 days after application. 
Precautions: 
• Crop injury may result if application if followed by heavy rain. Avoid application of more than 1/2 inch of irrigation within o ne month 
after application of Metribuzin 75, or crop injury may occur. 
• This treatment may cause some chlorosis or minor necrosis. Because garbanzo bean varieties may vary in their susceptibility to 
Metribuzin 75, determine crop tolerance prior to adoption as a field scale practice to prevent possible injury. 
LENTILS AND PEAS 
(Idaho, Oregon, Washington, Montana, and North Dakota) 
Metribuzin 75 herbicide may be used as a preemergence and postemergence application for the suppression of certain broadleaf 
weeds in lentils and peas. 
Weeds Suppressed* 
Common chickweed** Pennsylvania smartweed 
Corn spurry Pineapple weed 
Dog fennel Prostrate knotweed 
Field pennycress Redroot pigweed 
Henbit** Shepherd’s-purse** 
Lambsquarters Wild mustard 
*Suppression is a reduction in weed size and growth compared to a non-treated area in the same field. 
**Preemergence application only. 
Preemergence Application: Make a single preemergence application of Metribuzin 75 at 0.25 to 0.5 pound per acre per crop year. 
Apply in 10.0 or more gallons of water per acre with ground spray eq uipment or 5.0 or more gallons of water per acre with aerial 
spray equipment. Apply Metribuzin 75 before or after planting. Thorough incorporation, either by rainfall or by mechanical mean s, is 
essential for weed suppression. Under dry conditions, incorporate Metribuzin 75 into the top 1 to 2 inches of soil with spike h arrows, 
or similar shallow incorporation equipment, then cross harrow to insure uniform soil incorporation. Where soil surface is moist at the 
time of application and rain follows before weed emergence, a broadcast application should provide adequate weed suppression. 
Use the higher rate on fine-textured soils (high in clay or organic matter) and in fields with a history of high weed populations.

44 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Metribuzin 75 may be applied pre- or post plant incorporated as a tank mix combination with Far-Go® 4EC. Follow the Directions for 
Use statements on both product labels. 
Postemergence Application: One postemergence application may be made per season. Use 0.16 to 0.3 pound of Metribuzin 75 per 
acre on lentils and spring peas. On winter peas, use 0.25 to 0.3 pound of Metribuzin 75 per acre. For suppression of Dog fennel, 
use 0.3 pound Metribuzin 75 per acre. Apply specified dosage in 20.0 or more gallons of water per acre with ground spray equipment 
or 5.0 or more gallons of water per acre with aerial spray equipment. Do not exceed 40 psi with ground spray equipment. Apply a s 
a broadcast spray when weeds are small (less than 2 inches in height or diameter) and before crop is 6 inches tall. 
Precautions: 
• Temporary chlorosis of the crop may occur. There is an added risk of crop injury if a postemergence application is made 
following a previous preemer - gence or post plant incorporated Metribuzin 75 application. 
• Do not apply over very moist soils or wet crop foliage. Do not apply postemergence applications within 3 days after periods of 
cool, wet, or cloudy weather or crop injury may occur. 
• Do not apply within 24 hours of treatment with other pesticides. 
• Crop injury may result if crop is under stress conditions caused by cold weather, low fertility, disease , or insect damage. 
• Crop injury may also result if application is followed by heavy rain. 
• Do not apply to “Estin” lentils. 
• This treatment may cause some chlorosis or minor necrosis. Because lentil and pea varieties may vary in their susceptibility to 
Metribuzin 75, determining crop tolerance prior to adoption as a field scale practice is suggested to prevent possible injury. 
Restrictions (Lentils and Peas): 
• Do not apply more than 0.6 pound Metribuzin 75 per acre per year. 
• Do not use on coarse-textured soils, sandy soils , or soils with less than 1.5% organic matter. 
• Do not use on clay knobs or poorly covered subsoils. 
• Do not apply on shallow seedlings less than 2 inches deep (preemergence only). 
• Pre-harvest Interval (PHI): Do not apply within 50 days of harvest of peas, or within 75 days of harvest of lentils. 
• Do not graze or feed treated vines to livestock within 40 days after application. 
Maintain continuous spray tank agitation to keep material in suspension. Avoid overlapping and shut off spray booms while turni ng, 
slowing, or stopping, or crop injury may occur. 
For additional precautions, restrictions, limitations, and sprayer clean-up information refer to the appropriate sections of this label. 
RESTRICTIONS FOR AREAS OF SUGARCANE USE 
• For aerial and chemigation application methods on sugarcane the maximum application rate is 2.6 pounds Metribuzin 75 per acre. 
• To assure that spray will not adversely affect adjacent sensitive nontarget plants, apply this product by aircraft at a minimum upwind distance of 400 
feet from sensitive plants. 
• Do not rotate any crop not listed on this label for 18 months following application. 
• Do not use treated foliage for feed or forage. 
SUGARCANE 
(Hawaii Only) 
Metribuzin 75, a selective herbicide, is effective as a preemergence and an early postemergence broadcast application for contr ol of 
certain grass and broadleaf weeds. When applied as a spot treatment, it also provides excellent control of perennial grasses and 
broadleaves. 
Ground Application: Mix Metribuzin 75 by filling the spray tank half full of clean water. Then add the specified amount of Metribuzin 
75 to suit the total tank capacity and the rate of application per acre (preferably 25.0 to 35.0 gallons per acre). Complete fi lling the 
tank and maintain sufficient agitation during mixing and spraying to ensure a uniform spray mixture. 
Aerial Application: Metribuzin 75 may be used in aerial spray equipment as a preemergence or postemergence application to 
irrigated sugarcane. Calibrate aerial spray equipment to apply the proper amount of Metribuzin 75 in 5.0 to 10.0 gallons of spr ay 
mixture per acre. 
Metribuzin 75 applied preemergence or postemergence to the sugarcane as a broadcast spray or spot treatment will effectively 
control the following when weeds are less than 3 inches in height.

45 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Weeds Controlled in Irrigated and Non-irrigated Sugarcane 
Broadleaves 
Amaranth, spiny (Amaranthus spinosus) 
Euphorbia, wild (Euphorbia spp.) 
Fireweed (Erechtites hieracifolius) 
Floras paintbrush (Emilia sonochifolia) 
Spurge, garden (Euphorbia hirta) 
Spurge, graceful (Euphorbia glomerifera) 
Grasses 
Crabgrass (Digitaria spp.) 
Guineagrass (Panicum maximum) 
Plushgrass (Chloris radiate) 
Ricegrass (Oryzopsis hymenoides) 
Wiregrass (Eleusine indica) 
Weeds Controlled in Irrigated Sugarcane Only 
Broadleaves 
Amaranth, spleen (Amaranthus dubius) 
Haole koa (Leucaena leucocephala) 
Hialoa (Waltheria americana) 
Hilahila (Mimosa pudica) 
Purslane, common (Portulaca oleracea) 
Rattlepod (Crotalaria spectabilis) 
Grasses 
Alexandergrass (Brachiaria plantaginea ) 
Bristly foxtail (Setaria verticillata) 
Weeds Controlled in Non-Irrigated Sugarcane Only 
Broadleaves ageratum (Ageratum conyzoides) 
Richardia (Richardia brasiliensis) 
Tarweed (Cuphea carthagenesis) 
 
Sugarcane (Hawaii Only) 
Broadcast Applications 
Metribuzin 75 Remarks 
(Lb/A) 
2.6 to 5.3 Preemergence (Irrigated and non-irrigated sugarcane): Apply specified dosage/A as a broadcast spray 
(non-irrigated) to the soil surface. Make applications within 2 weeks after planting prior to cane emergence or shortly 
5.3 to 8.0 after emergence (spike stage). 
(irrigated) OR 
Early Postemergence (Irrigated and non-irrigated sugarcane): Apply specified dosage/A as a broadcast 
spray over the cane. Application may be delayed as long as 4 to 6 weeks after planning provided weeds are 
less than 3 inches in height. 
2.6 to 5.3 OR 
Postemergence: Apply specified dosage/A as a broadcast spray to control weeds prior to “close in” time 
when cane shades out the weed growth. 
3.3 to 6.6 Spot Treatment: Apply specified dosage in 30.0 to 50.0 gal of finished spray/A. Spot treatments 
may be used to control weeds in missed areas, corners of fields, or areas of hard to control weeds. 
Restrictions: Do not apply more than 10.6 pounds of Metribuzin 75 (8.0 pounds active ingredient)/A crop cycle regardless of the method of 
application. Pre-harvest Interval (PHI): The last application may be made up to 17 months of harvest. 
SUGARCANE 
(Louisiana and Texas Only) 
Preemergence and postemergence applications of Metribuzin 75 with aerial or ground spray equipment may be used for control 
of the following weeds in sugarcane in Louisiana and Texas:

46 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Broadleaves 
Amaranth, spiny (Amaranthus spinosus) 
Bindweed, field (Convolvulus arvensis) 
Chickweed (Cerastium vulgatum) 
Henbit (Lamium amplexicaule) 
Lambsquarters (Chenopodium album) 
London rocket (Sisymbriumirio) 
Marestail (Conyza canadensis) 
Mustard, wild (Brassica kaber) 
Pigweeds (Amaranthus spp.) 
Purslane (Portulaca oleracea) 
Sowthistle (Sonchus spp.) 
Grasses 
Broadleaf signalgrass (Brachiaria platyphylla) 
Crabgrass (Digitaria spp.) 
Foxtails (Setaria spp.) 
Johnsongrass, seedling (Sorghum halepense) 
Oats, winter (Avena spp.) 
Sugarcane (Louisiana and Texas Only) 
Applications 
Metribuzin 75 
(Lb/A) Remarks 
2.0 to 4.0 Broadcast: Apply specified dosage per acre using 20.0 to 30.0 gal of water with ground equipment or 
5.0 gal of water with aircraft spray equipment. Apply as a broadcast spray during the fall after planting 
or to the stubble after harvest. Make a second application early in the spring. 
1.0 to 2.0 Band: Apply specified dosage in 10.0 to 20.0 gal of water/A in a 30- to 36-inch band over the row during 
the fall after planting or to the stubble after harvest. Make a second application early in the spring. 
 
Restrictions (Louisiana and Texas only): 
• Use the higher rate on heavy clay soil and soil with a high percentage of organic matter. 
• If necessary, a third application may be made in late spring at layby. 
• Pre-harvest Interval (PHI): Do not apply within 60 days of harvest. 
 
SUGARCANE 
(Florida Only) 
Postemergence over-the-top or directed spray applications of Metribuzin 75 may be used for the control of the following weeds 
in sugarcane in Florida. 
Broadleaves 
Amaranth, spiny (seedling) ( Amaranthus spinosus) 
Butterweed (Cressleaf groundsel) (Senecio glabellus) 
Cudweed (Gnaphalium spp.) 
Purslane (Portulaca oleracea) 
Grasses 
Crabgrass, large (Digitaris sanguinalis) 
Foxtail, bristlegrass (Setaria magna) 
Goosegrass (Eleusine indica) 
Panicum, broadleaf (Panicum adspersum) 
Signalgrass, broadleaf (Brachiaria platyphylla)

47 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Sugarcane (Florida Only) Applications 
Metribuzin 75 
(Lb/A) Remarks 
1.3 to 2.6 Ground Application: Metribuzin 75 may be used in 1 or 2 applications with a minimum of 14 days 
between each application. Apply when weeds are less than 6 inches tall in 10.0 to 40.0 gal of spray 
mixture/A. 
Postemergence Broadcast or Band: Apply over the top of stubble or plant cane while sugarcane is less 
than 14 inches tall. 
Postemergence Directed Spray: Apply to sugarcane that is a minimum of 14 inches tall and before row 
closing. 
1.3 to 2.0 Aerial Application: Apply when weeds are less than 4 inches tall in 5.0 to 10.0 gal of spray mixture/A. 
Apply to stubble or plant cane while the sugarcane is less than 14 inches tall. 
Metribuzin 75 Plus Atrazine Tank Mix: Metribuzin 75 may be used with atrazine as a preemergence or postemergence (before row clos - 
ing) application to sugarcane. Rates for Metribuzin 75 are 1.0 to 2.6 pounds per acre and atrazine 80% WP (4L) are 2.5 to 5.0 pounds 
per acre (2.0 to 4.0 quarts per acre). For additional information on precautions, instructions, limitations, application, and w eeds 
controlled, refer to this label and the atrazine label. 
Restrictions (Florida only): 
• Do not use more than 2.6 pounds per acre in a single growing season. 
• Do not use on sand soils. 
• Pre-harvest Interval (PHI): Do not apply within 60 days of harvest. Do not use treated crop for feed or forage. 
Precautions: 
• Avoid spray overlaps or variations in application speed that may result in insufficient or excessive rates of application. 
• Spray contact with sugarcane foliage may result in minor leaf margin chlorosis and/or necrosis. 
TOMATOES 
Apply Metribuzin 75 herbicide with ground equipment to seeded and transplanted tomatoes as specified below under “Applications. ” 
For effective control of grasses and broadleaf weeds with postemergence applications, apply Metribuzin 75 before weeds are 1-in ch 
tall. Thorough spray coverage on weed foliage is essent ial for adequate control with postemergence applications. 
Refer to the appropriate section of this label for additional information regarding spray equipment, dilution rates, mixing, sp rayer, cleanup, 
restrictions, container disposal, and cautions. 
For specific application information see the “Product Information” section in the front of this label. 
 
WEEDS CONTROLLED 
PREPLANT INCORPORATED APPLICATIONS TRANSPLANT TOMATOES ONLY 
Broadcast Sprays - 0.3 to 0.6 Lb Metribuzin 75/A 
Broadleaves 
Galinsoga (Galinsoga spp.) 
Lambsquarters (Chenopodium album) 
*Pigweed, redroot (Amaranthus retroflexus) 
*Purslane, common (Portulaca oleracea) 
Grasses 
*Goosegrass (Eleusine indica) 
Preplant incorporated applications applied as directed will suppress Foxtails, Panicums and Barnyardgrass. 
Metribuzin 75/Trifluralin Tank Mix: This tank mix combination applied preplant incorporated as directed on this label will control the 
weeds listed above plus those weeds listed on the trifluralin label. 
*For optimum control of these weeds, use the higher rate provided on the label for the type of application to be made. Repeat 
postemergence applications may be needed for best control. 
Postemergence applications as directed on this label will suppress Barnyardgrass and Crabgrass when these weeds are less than 1 inch 
tall.

48 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
WEEDS CONTROLLED 
POSTEMERGENCE APPLICATIONS ESTABLISHED TOMATOES 
For effective control of weeds with postemergence applications, apply Metribuzin 75 before weeds are 1-inch tall. 
Broadcast Sprays 0.3 to 0.6 Lb Metribuzin 75/A 
Broadleaves 
Carpetweed (Mollugo verticillata) 
Fumitory (Fumaria officinalis) 
Galinsoga (Galinsoga spp) 
*Jimsonweed (Datura stramonium) 
*Ladysthumb (Polygonum persicaria) 
Lambsquarters (Chenopodium album) 
Mustard, wild (Brassica kaber) 
Pigweeds (Amaranthus spp.) 
Purslane (Portulaca oleracea) 
*Ragweed, common (Ambrosia artemisiifolia) 
*Smartweed, Pennsylvania (Polygonum pensylvanicum) 
Toadflax (Linuria spp.) 
*Velvetleaf (Abutilon theophrasti) 
Directed Sprays 0.6 to 1.3 Lb Metribuzin 75/A 
Grasses 
*Foxtail, yellow (Setaria glauca) 
Goosegrass (Eleusine indica) 
Plus Weeds Listed Under Broadcast Sprays 
*For optimum control of these weeds, use the higher rate provided on the label for the type of application to be made. Repeat 
postemergence applications may be needed for best control. 
Postemergence applications as directed on this label will suppress Barnyardgrass and Crabgrass when these weeds are less than 1-inch tall. 
Broadcast Applications for Tomatoes 
Metribuzin 75 
*Lb/A Remarks 
0.3 to 0.6 Preplant Incorporated - Transplant Tomatoes Only: Apply specified dosage in 10.0 or more gal of 
water/A as a broadcast spray to the soil surface immediately before transplanting. Incorporate to a 
depth of 2 to 4 inches with equipment capable of uniformly mixing the chemical into the soil. This 
application may be made alone or in a tank mix combination with trifluralin. When transplanting 
tomatoes, place the root system of 
the plants below the herbicide incorporation zone or injury may 
occur. Refer to the trifluralin label for specific rate of application and for additional precautions and 
restrictions for tomatoes. 
0.3 to 0.6 Postemergence Broadcast Spray - Eestablished Tomatoes: Apply specified dosage in 20.0 or more gal of 
water/A as a broadcast spray, or apply in 1/4 to 3/4 inch of water (use 1/4 to 1/2 inch of water on 
sandy soils)/A as a continuous injection in center pivot and lateral move systems or apply in the last 
15 to 30 minutes of set in permanent solid set sprinkler systems. One or more applications may be 
applied/use season. Allow at least 14 days between applications or severe crop injury may occur. For 
transplanted tomatoes, do not apply until transplants have recovered from transplant shock and new 
growth is evident. 
Do not apply to tomatoes within 24 hours of application of other pesticides. Do not 
tank mix with other pesticides. (See “Special Precautions” below.) 
0.6 to 1.3 Postemergence Directed Spray- Established Tomatoes: Apply specified dosage in 20.0 or more gal 
of water/A as a directed spray. One or more applications may be applied/use season. Allow at least 14 
days between applications or severe crop injury may occur. Avoid contacting tomato foliage with spray. 
Use this method of treatment for use in fields with a history of severe weed pressure or in fields infested 
with hard-to-
control weeds. For transplanted tomatoes, do not apply until transplants have recovered from 
transplant shock and new growth is evident. Do not apply to tomatoes within 24 hours of application of 
other pesticides. (See “Special Precautions” below.) When banding see the appropriate section in the 
front of this label. 
*Use the higher rate in fields with a history of severe weed pressure and for maximum residual weed control.

49 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Restrictions (Tomatoes): 
• Do not apply more than a total of 1.3 pounds Metribuzin 75 per crop season. 
• Do not apply the total amount of 1.3 pounds Metribuzin 75 within a time span of less than 35 days, except in the case of direct ed 
sprays. 
• Allow at least 14 days between applications, regardless of dosage or method of application or severe crop injury may occur. 
• Pre-harvest Interval (PHI): Do not apply within 7 days of harvest. 
• Aerial application is prohibited. 
• Do not use air blast or other high pressure spray equipment to make postemergence applications of Metribuzin 75. 
• DO NOT USE METRIBUZIN 75 ON TOMATOES IN KERN COUNTY, CALIFORNIA. 
Precautions: 
• Do not apply within 3 days after periods of cool, we t or cloudy weather, or crop injury will occur. 
• Do not use hot caps on tomatoes within 7 days before or at any time after application of Metribuzin 75. Do not treat seeded 
tomatoes until plants have reached the 5- to 6-leaf stage or severe crop injury may occur. 
• Crop injury or delayed maturity may result from broadcast or directed spray applications if tomatoes are growing under stress 
conditions such as periods of drought or cool, wet , and cloudy weather preceding application. 
• For newly introduced tomato varieties with unknown tolerance to Me tribuzin 75, treat only a small area to determine if Metribuz in 
75 can be used without injury to the crop. 
CEREALS 
(Spring and Winter Barley and Winter Wheat) 
Metribuzin 75 herbicide may be used for control or suppression of certain grasses and broadleaf weeds when applied postemergence 
to spring and winter barley or winter wheat. Metribuzin 75 al one and several tank mixture treatments are recommended for use in 
the following states: Arkansas, Georgia, Idaho, Illinois, Indian a, Kansas, Kentucky, Louisiana, Mississippi, Missouri, Montana, 
Nevada, Ohio, Oklahoma, Oregon, Tennessee, Texas, Utah, Washington. 
Mixing: See the “Product Information” section of this label for specific mixing procedures. When tank mixing, carefully follow the 
instructions on this label. Refer to the other product labels registered for use in barley and winter wheat for additional use directions, 
rates, weeds controlled and restrictions. 
Application: Metribuzin 75 may be applied by aerial or ground application equipment. Use a minimum spray volume of 2.0 gpa by air and 
10.0 gpa by ground. Uniform spray coverage is necessary to obtain optimum weed control and to minimize potential for crop injur y. 
Do not exceed rates specified on this label. Do not apply Metribuzin 75 through any type of irrigation equipment. Apply Metribu zin 
75 when the crop is healthy and actively growing. Metribuzin 75 may be applied more than once per crop season. Allow a minimum 
of 21 days between applications if wheat is actively growing or allow 45 days between applications if wheat is growing in adver se 
conditions, has entered dormancy or is stressed due to frost da mage, disease, drought or excessive moisture. Do not use on soil s 
containing less than 0.75% organic matter. Do not apply more than a total of 10.66 ounces Metribuzin 75 (8.0 ounces active 
ingredient) per acre per year. On irrigated cereals, do not apply more than 0.5 inch of water for the first irrigation, the max imum 
amount for each additional irrigation must not exceed 1 inch. Allow a minimum of 14 days between the first irrigation and subsequent 
irrigations.
 
Performance Factors: Weed control may not be observed for 2 to 4 weeks under normal growth conditions and for 4 to 6 weeks 
under very dry conditions. Moisture (at least 1/2 inch) is requir ed within 2 to 3 weeks after application to move Metribuzin 75 into the 
weed root zone. Lack of adequate moisture after application may result in poor or erratic weed control. Control or suppression of 
listed weeds is dependent on weed size at time of application. Control or suppression may be reduced if broadleaf weeds are tal ler 
than 1 inch or grasses have more than 2 leaves. 
Tank Mixtures: Metribuzin 75 may be tank mixed with Ally®, Amber®, Finesse®, Glean® FC, Harmony Extra, 2,4-D, MCPA, Rifle, 
Bromac® or Buctril herbicides. A nonionic surfactant containing at least 80% active ingredient may be used in Metribuzin 75 tan k 
mixes with sulfonylurea herbicides (Ally, Amber, Finesse, Glean FC , and Harmony Extra). Do not use a crop oil concentrate or any 
adjuvant containing vegetable or petroleum oils with any Metribuzin 75 mix as crop injury may result. Additional pesticides may also 
be tank mixed with Metribuzin 75 unless specifically prohibited on the mix products’ label. In some instances, combinations with 
organophosphate insecticides may cause temporary leaf yellowing and/or crop injury, especially when widely fluctuating day/nigh t 
temperatures occur near application. Always refer to the other pr oduct labels registered for use on cereals for additional dire ctions, 
rates and weed species controlled. Observe all precautions and limitations on labeling of all products used in mixtures.

50 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Restrictions (Cereals): 
• Pre-harvest Interval (PHI): Do not graze wheat within 14 days of Metribuzin 75 application or harvest grain within 21 days afte r last 
application. 
• Do not graze or harvest barley before crop maturity. 
• For tank mix combinations, follow the most restrictive label. 
• Do not exceed rates specified on this label. 
• Do not apply Metribuzin 75 through any type of irrigation equipment. 
• Do not apply more than a total of 10.66 ounces Metribuzin 75 (8.0 ounces active ingredient) per acre per year. 
Precautions: Cereal Injury - Crop injury may occur if Metribuzin 75 is applied: 
• When the crop is under stress such as winter kill, frost damage, disease, drought or excessive moisture, severe grazing, or whe n 
these conditions follow the application. 
• In combination with fluid fertilizer especially with the addition of surfactant. 
• Prior to the growth stage specified on this label. 
• To soils high in lime or sodium, a pH greater than 7.7, calcareous, gravelly, thinly covered , or exposed subsoil areas. 
• To fields where cereal seeds have been planted less than 1 inch deep. 
• To a non-winter hardy wheat or barley variety as listed below. 
• To a sensitive wheat or barley variety as listed below. 
• To frozen soil or crop still in winter dormancy. 
Cereal Rotations Following Potatoes Treated with Metribuzin 75: If planting a sensitive cereal variety (listed under the wheat and barley 
variety tolerance portion of this label), following potatoes trea ted with Metribuzin 75 or metribuzin containing products, refe r to the 
potato section of the Metribuzin 75 label for special cultural practices to follow. 
Application 
Metribuzin 75 alone or in a tank mix with labeled broadleaf herbicides may be applied by aerial or ground spray equipment as a broadcast 
postemergence spray. 
Postemergence Broadcast Applications of Metribuzin 75 
Metribuzin 75 Rate (Oz/A) % Organic Matter 
Crop 
Growth Stage Soil Texture 0.75 to 2.0 Over 2.0 
2-Leaf to 2-Tiller Coarse 1.0 to 2.0 1.0 to 3.0 
Medium 1.0 to 3.0 2.0 to 3.0 
Fine 2.0 to 3.0 2.0 to 4.0 
Use these rates on crops with secondary roots smaller than 1 inch. 
For dryland winter wheat (non-irrigated), apply the highest labeled rate to achieve maximum weed suppression / 
control. 
3-Tiller to 4-Tiller Coarse 3.0 to 4.0 4.0 to 5.0 
Medium 4.0 to 5.0 5.0 to 6.0 
Fine 5.0 to 6.0 5.0 to 6.0 
Do not apply within 2 weeks after grazing or breaking of winter dormancy. Apply after the crop is at or beyond 
the 3-tiller growth stage but before jointing. Secondary roots should be developed and larger than 1 inch long. 
Do not 
apply before 75 days after planting. 
For dryland winter wheat (nonirrigated), apply the highest labeled rate to achieve maximum weed suppression / 
control. 
GEORGIA ONLY: Wheat must be planted before November 15 in Piedmont area and Northern part of the state, 
and before December 1 in the Coastal Plain area. 
Over 4 Tillers Coarse 4.0 to 6.0 5.0 to 8.0 
 Medium 4.0 to 8.0 5.0 to 8.0 
 Fine 5.0 to 8.0 8.0 to 10.6 
Do not apply within 2 weeks after grazing or breaking of winter dormancy. Apply after the crop is at or beyond 
the 3-tiller growth stage but before jointing. Secondary roots should be developed and larger than 1 inch long. 
Do not apply before 75 days after planting. 
For dryland winter wheat (nonirrigated), apply the highest labeled rate to achieve maximum weed suppression / 
control. 
GEORGIA ONLY: Wheat must be planted before November 15 in Piedmont area and Northern part of the state, 
and before December 1 in the Coastal Plain area.

51 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Wheat and Barley Varietal Tolerance* 
Wheat and barley varieties vary in their tolerance to Metribuzin 75. Varieties below are tolerant to and are recommended for us e 
with Metribuzin 75. 
Winter Wheat: Abe, AgriPro Mason, AgriPro Shiloh, Arthur, AS 7846, AS 78 53, Baker Seed 32, Barbie VI, Basin, Batum, Bayles, 
Becker, Bintee V, Buchshot DS 2368, Caldwell, Cardinal, Cashup, Centurk, Cherokee, Cheyenne, Clark, Coker 747, Coker 762, Coker 
797, Coker 68-15, Coker 9134, Coker 9543, Coker 9904, Coker 9907, Daws, DB 553W, DB 562W, DB 580W, Delta King 502, Delta 
King 9027, Dixie 952, Doublecrop, Dusty, Dyna-Gro 426, Dynasty, Excel, Faro, FFR 525W, Florida 302, FS 432, FS 433, FS 435, Gains, 
Garst 64, Georgia 100, Genie V, Hatton, Hawk, Hill 81, Howell, Hunter, Hyak, Hyslop, Katie VI, Ky 16-2, Larned, Lewis 833, Lewjain, 
Lisa, Longhorn, Luke, Madsen, Magnum, Malcom, McDermid, McNair 1003, McNair 1813, Molly, Moro, Neely, Nelson, Newton, 
Norstar, Norwin, Nugaines, Oasis, Omega 78, Paha, Peck, Pike, PI 2157, PI 2180, PI 2510, PI 2545, PI 2548, PI 2550, PI 2552, PI 
2555, PI 2566, PI 2571, PI 2580,
 PI 2684, Quantum 577, Redwin, Rocky, Saluda, Sawyer, SC 104, Siouxland, Sprague, Southern 
Belle, Stacy, Stallion, Stephens, TAM W101, TAM 105, TE 877, TE 2548, TE SR204, Tiber, Tomahawk, TR 8555, TR 8557, TR 8768, 
Traveler, Tres, Tyee, Tyler, Verne, Victory, Wakefield, Wanser, Weston, Winalta, Wrangler. 
Barley: Advance, Boyer, Clark, Compana, Hannchen, Hector, Hesk, Hudson, Lud, Luther, Kamiak, Klages, Olympic, Piroline, Steptoe, and 
Triumph. 
The following cereal varieties are sensitive to Metribuzin 75 and are not recommended for use: 
Winter Wheat: AgriPro Clemens, AT 90W, AT 91W, Arapaho, Baker Seed 33, Century, Cimarron, Coker 833, Coker 916, Coker 983, Coker 
9024, Coker 9105, Coker 9323, Coker 9474, Coker 9663, Coker 9835, Coker Coker 9766, Coker 9877, EK 102, EK 114, FFR 555, Florid a 
304, Freedom, FS 417, FS 423, FS 425, FS 430, Gore, Hazen, Hickory, Jackson, Julie III, KY 49-25, Linden, Madison, Mesa, 
Mustang, Pacer, PI XW 522, PI 2551, PI 2163, Pioneer 2691, Princeton 733, PSR W71, PSR 226, PSR 278, Rosen, Savannah, 
Sierra, TAM 107,
 TR 101, TR 1011, TR 8822, Triumph 64, Vona, Wings, Winridge, Yamhill. 
Spring/Durum Wheat: Avoid use on spring wheat and Durum wheat varieties. 
Barley: Glenn, Morex, Moravian 3, Larker, Summit, Bracken, Anheuser Busch B2601 and varieties with Morex parentage. 
Varieties Not Listed: To avoid possible crop injury on any variety not mentio ned in this label, contact a Loveland Products, Inc. 
representative or herbicide expert for a variety recommendation prior to treatment or treat a small strip of unlisted variety w ith the 
specified Metribuzin 75 rate to ascertain crop tolerance before treating an entire field. 
*Abbreviated names of vendors: AS (Agseco), AT (Agratech), DB (Diener Bros.), FS (Growmark FS), PI (Pioneer), PSR (Hybritech), 
SC (J.M. Schultz), TE (Terra), and TR (Terral). 
Weeds Controlled 
Used at specified rates, Metribuzin 75 will control many annual broadleaf weeds. Control is best when applied to young, activel y 
growing weeds. Weeds controlled by Metribuzin 75 include: 
Bittercress 
Catchfly, conical (Sand) 
Catchweed (Madwort) 
Chickweed, common 
Chickweed, mousear 
Corncockle dogfennel 
(Mayweed) 
Evening primrose, cutleaf 
Falseflax, smallseed 
Fiddleneck, tarweed 
Filaree, redstem 
Geranium 
Carolina gromwell, spp. 
Henbit 
Knotweed, prostrate 
Lambsquarters, common 
Lettuce, miners 
Mustard, Blue 
Mustard, Wild 
Pennycress, field 
Pepperweed, Virginia 
 
Pigweed, spp. 
Pineappleweed polemonium , 
annual (Jacob’s ladder) 
Radish, wild 
Shepard’s-purse 
Speedwell, ivyleaf 
Turnip, wild 
 
 
Weeds Suppressed 
Metribuzin 75 control of the following weeds varies from poor to excellent depending on time of application, stage of growth at 
application, temperatures and soil moisture conditions following treatment. For maximum effect on these weeds, apply the highes t 
specified rate at the earliest growth stage timing for each part icular soil type and organic matter. Suppression is a reduction in weed 
size and growth as compared to a non-treated area in the same field.

52 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Broadleaves 
Buckwheat, wild* Mustard, tumble (Jim Hill)* 
Buttercup, spp. Tansymustard 
Cowcockle Thistle, Russian 
Kochia* Vetch, winter 
Lettuce, prickly 
Grasses 
BarelyBarley, hare (Wild) Brome, ripgut* 
Barley, little Cheat* 
Blackgrass Foxtail, sppp* 
Bluegrass, annual Oat, wild* 
Bluegrass, bulbous Rescuegrass* 
Brome, downy* Whitlowgrass, spring (Vernal) 
Brome, Japanese* Windgrass 
*Use the highest specified Metribuzin 75 rate for maximum weed suppression. 
For Weed Control in a Wheat/Fallow/Wheat Rotation 
(Idaho, Oregon, Utah and Washington Only) 
Metribuzin 75 may be applied to provide weed control during the fallow period after wheat harvest or in the spring before winte r 
wheat is planted. Winter wheat can be seeded 4 months (120 days) after spring application. Mechanical tillage or the application of 
a contact herbicide may be required to control weeds germinating prior to seeding of winter wheat. Best results will be obtaine d 
where straw and chaff are evenly distributed across the field. 
For specific application information see the “Product Information” section in the front of this label. 
Where weed growth is present at application time, Metribuzin 75 should be applied with Gramoxone Inteon or other contact herbicide. 
Refer to the other product label registered for additional directions, rates, and weed species controlled. 
Weeds 
Controlled 
Broadleaves 
Chickweed, common (Stellaria media) Mustard, treacle (Eyrsimum repandum) 
Cowcockle (Vaccaria pyramidata) Mustard, wild (Brassica kaber) 
Henbit (Lamium amplexicaule) Pennycress, field (Fanweed) (Thlaspi arvense) 
*Kochia (Kochia scoparia) Pigweeds (Amaranthua spp.) 
Lambsquarters (Chenopodium album) *Russian thistle (Salsola iberica) 
Mustard, blue or purple (Chorispora tenella) Sunflower (Helianthus spp.) 
Mustard, Jim Hill (Sisymbrium altissimum) 
Mustard, tansy (Descurainia pinnata) 
 
Grasses 
Cheatgrass (Bromus secalinus) *Wheat, volunteer (Triticum spp.) 
Downy brome (Bromus tectorum) *Wild oats (Avena fatua) 
*Foxtail, green (Setaria viridis) 
*Note: Since control of these weeds may be variable depending on moisture following application, the higher labeled rate should be used. 
After Harvest Application (Fall Fallow): Metribuzin 75 may be applied to wheat stubble after harvest in the fall. Apply 0.6 to 0.83 
pound per acre broadcast before weeds emerge. Use higher rate for longer weed control or for weeds designated as requiring the 
higher rate for control. Rainfall (1/2 inch or more) is necessary for herbicide activation. 
Restrictions: Do not plant crops in treated areas for at least 10 months following fall applications. 
Metribuzin 75 may be applied at 0.6 to 0.83 pound per acre as directed above for a fall application. If other vegetation is pre sent at 
the time of application, use a contact herbicide. 
Spring Application (Summer Fallow): Metribuzin 75 may be applied to wheat stubble in the spring. Apply 0.5 to 0.6 pound per 
acre broadcast before weeds emerge in the spring. Use higher rate for longer weed control or weeds designated as requiring high er 
rate for control. Rainfall (1/2 inch or more) is necessary for herbicide activation.

53 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Restrictions: 
x Do not graze treated fields. 
x Do not plant spring seeded cereals following fall applications fallow. 
x Where Metribuzin 75 was applied in the fall, do not apply Metribuzin 75 in the spring. 
For Weed Control in a Fallow Rotation with Barley and Wheat 
(Colorado, Kansas, Montana, Nebraska and Wyoming Only.) 
Metribuzin 75 may be applied to provide weed control during the fallow period after wheat or barley harvest or in the spring be fore 
planting of winter wheat or barley. Mechanical tillage or the ap plication of a contact herbicide may be required to control wee ds 
germinating prior to seedling of winter wheat or barley. 
For specific application information see the “Product Information” section in the front of this label. 
Where weed growth is present at application time, Metribuzin 75 should be applied with Gramoxone Inteon, glyphosate (Makaze), o r other 
contact herbicide. Refer to the other product label registered for additional directions, rates, and weeds species controlled. Do not 
plant crops in treated areas earlier than 10 months following Fall applications. 
Weeds Controlled 
Broadleaves 
Chickweed, common (Stellaria media) Mustard, tansy (Descurainia pinnata) 
Cowcockle (Vaccaria pyramidata) Mustard, treacle (Eyrsimum repandum) 
Henbit (Lamium amplexicaule) Mustard, wild (Brassica kaber) 
*Kochia (Kochia scoparia) Pennycress, field (fanweed) (Thlaspi arvense) 
Lambsquarters (Chenopodium album) Pigweeds (Amaranthua spp.) 
Mustard, blue or purple (Chorispora tenella) Russian thistle (Salsola iberica) 
Mustard, Jim Hill (Sisymbrium altissimum) Sunflower (Helianthus spp.) 
Grasses 
Cheatgrass (Bromus secalinus) *Wheat, volunteer (Triticum spp.) 
Downy brome (Bromus tectorum) *Wild oats (Avena fatua) 
*Foxtail, green (Setaria viridis) 
*Note: Since control of these weeds may vary depending on moisture following application, use the higher rate specified below. 
After Harvest Application (Fall Fallow): Metribuzin 75 may be applied to the stubble after harvest in the fall. Apply 0.83 to 1.0 pound per 
acre broadcast before weeds emerge. Use the higher rate for longer weed control or for weeds designated as requiring the higher 
rate for control. Rainfall (1/2 inch or more) is necessary for herbicide activation. Do not rotate any crop not listed on this label for 18 
months following application. 
Spring Application (Summer Fallow): Metribuzin 75 may be applied to the stubble in the Spring. Apply 0.5 to 0.6 pound per acre 
broadcast before weeds emerge in the spring. Use the higher rate for longer weed control or weeds designated as requiring the higher 
rate for control. Rainfall (1/2 inch or more) is necessary for herbicide activation. Wheat or barley can be seeded 120 days after spring 
application. 
Restrictions: 
x Do not graze treated fields. 
x Do not plant spring seeded cereals following fall applications for fallow. 
x Where Metribuzin 75 was applied in the fall, do not apply Metribuzin 75 in the spring. 
Crop Rotation Directions 
Waiting Period After Metribuzin 75 Herbicide Application1 
4 Months Alfalfa 
Asparagus 
Barley2 
Corn 
Forage grasses 
Sainfoin 
Soybeans 
Sugarcane 
Tomatoes 
Wheat2 
8 Months Barley 
Lentils 
Peas 
Wheat

54 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
12 Months Potatoes Rice3 
18 Months Sugar beets 
Onions 
And other root crops not listed on this label and all other 
crops not listed on this label. 
Do not rotate any crop not listed on this label after application of Metribuzin 75 to sugarcane. 
1 Cover crops for soil building or erosion control may be planted any time, but do not graze or harvest for food or feed. Stand r eductions 
may occur in some areas. 
2 Following peas, lentils, or soybeans. 
3 Do not rotate rice after any application to a primary crop greater than 1.0 pound active ingredient per acre of Metribuzin 75 per 
season. 
FOR USE ON BENTGRASS GROWN FOR SEED AND FOR WEED CONTROL IN 
ESTABLISHED1 PERENNIAL GRASSES GROWN FOR SEED IN OREGON 
WEST OF THE CASCADE MOUNTAINS AND IN CROOK, DESCHUTES, AND WASCO COUNTIES. 
1Established grasses are those which have been harvested at least once for seed or were planted 1 year or more prior to application. 
For Weed Control in Established Perennial Bentgrass Grown for Seed 
Weeds Controlled 
When used as directed below, Metribuzin 75 will reduce competition from seedlings of annual Bromus species, Annual ryegrass, 
and Annual bluegrass. Metribuzin 75 will control Rattail fescue, Henbit, Ivyleaf speedwell, Chickweed, Mustards, and Shepherd’s -
purse. 
Crop Tolerance: Crop tolerance is marginal and crop injury and yield redu ction are possible. To minimize crop injury, apply when 
the crop is not under stress. Use of adjuvants will reduce crop tolerance. Making the application after 3 consecutive sunny day s will 
reduce the potential for crop injury. 
 
Crop Metribuzin 75 
Lb/A 
Remarks 
Bentgrass grown 0.38 to 0.5 Apply Metribuzin 75 as a broadcast spray in at least 15.0 gal of spray solution/A 
when the volunteer grasses are in the 1- to 2-leaf growth stage following fall 
rainfall or irrigation and before active spring growth. Excessive crop injury 
and/or failure to control weeds may result if application is made after mid- 
February. Pre-harvest Interval (PHI): Allow at least 120 days between application 
and harvest for seed. 
for seed 
 
 
 
Application Restrictions: 
• Do not apply more than once per year. 
• Do not apply to a crop that is under stress, for example, from disease, severe insect damage, nutrient deficiency, cool to cold 
temperatures, or deficient or excessive moisture. 
• Apply only to Colonial and Creeping bentgrass. 
• Apply only to established bentgrass that is at least one year old and has been harvested for seed at least once. 
• Do not tank mix with other herbicides. 
Feeding Restrictions: Do not use the crop or crop residues as feed or livestock bedding for at least 28 days following the last application. 
FOR WEED CONTROL IN ESTABLISHED PERENNIAL GRASSES GROWN FOR SEED 
Weeds Controlled 
When used as directed below, Metribuzin 75 will reduce competition from volunteer seedlings of the indicated crop, annual Bromu s 
species, Annual ryegrass, and Annual bluegrass, Metribuzin 75 will control Rattail fescue, Henbit, Hyleaf speedwell, Chickweed, 
Mustards, and Shepherd’s-purse. The addition of wetting agents containing crop oil may enhance control of the volunteer crop an d 
grassy weeds. When adding wetting agents, follow the directions for use and specified rates on the wetting agent label. 
Metribuzin 75 is compatible with most fertilizers, fungicides, and insecticides. Metribuzin 75 may be combined with other herbi cides 
for enhanced weed control. Prior to tank mixing with another he rbicide, refer to the Product Information section of this label.

55 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Crop Metribuzin 75 
Lb/A 
Remarks 
Perennial ryegrass 
Tall fescue 
0.3 to 0.75 Apply specified dosage as a broadcast spray in at least 15.0 
gal of spray solution/A when the volunteer grasses are in 
the 1- to 2-leaf stage following fall rainfall or irrigation but 
prior to active spring growth. 
Bluegrass 
Fine fescue 
Orchardgrass 
0.3 to 0.5 Excessive crop injury and/or failure to control weeds may 
result if application is made after mid-February. Pre-harvest 
Interval (PHI): Allow at least 120 days between application 
and harvest. 
Application Restrictions: 
x Do not apply more than once per year. 
x Do not apply Metribuzin 75 through any type of irrigation system. 
x Crop and crop residues may be fed to livestock or used as bedding. If the seed crop is terminated and grazed or 
cut for forage, allow at least 28 days between application and use as animal feed. 
 
STORAGE AND DISPOSAL 
Do not contaminate water, food or feed by storage or disposal. 
PESTICIDE STORAGE: Store in a cool dry place and in such a manner as to prevent cross contamination with other pesticides, 
fertilizers, food, and feed. Store in original container and out of the reach of children, preferably in a locked storage area. Handle and 
open container in a manner as to prevent spillage. If the contai ner is leaking or material spilled for any reason or cause, c arefully 
sweep material into a pile. Refer to Precautionary Statements on label for hazards associated with the handling of this material. Do 
not walk through spilled material. Dispose of pesticide as directed above. In spill or leak incidents, keep unauthorized people a way. 
PESTICIDE DISPOSAL: Wastes resulting from the use of this product must be disposed of on site or at an approved waste disposal 
facility. 
[Note to reviewer – only the Container Disposal language applicable to the type of packaging (i.e., either plastic or 
paper) will appear on the final product label. Bracketed text will not appear on final product label] 
[PLASTIC CONTAINER] CONTAINER HANDLING: Nonrefillable container. Do not reuse or refill this container. Clean container 
promptly after emptying. to hold materials other than pesticides or dilute pesticides (rinsate). After emptying and cleaning, it may be 
allowable to temporarily hold rinsate or other pesticide-related materials in the container. Contact your state regulatory agency to 
determine allowable practices in your state. Once cleaned, some agricultural plastic pesticide containers can be taken to a container 
collection site or picked up for recycling. To find the nearest site, contact your chemical dealer or manufacturer, or contact The 
Agricultural- Container Recycling Council (ACRC) at www.acrecycle.org. 
Triple rinse or pressure rinse container (or equivalent) promptly after emptying. 
For packages up to 5 gallons: Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank . and 
drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate 
into application equipment or a mix tank or store rinsate for la ter use or disposal. Drain for 10 seconds after the flow begins to drip. 
Repeat this procedure two more times. Then offer for recycling or reconditioning, or puncture and dispose 
of in a sanitary landfill, or incineration, or, if allowed by state and local authorities, by burning. 
If burned, stay out of smoke. To find the nearest site, contact your chemical dealer or 
manufacturer, or contact The Agricultural Container Recycling Council (ACRC) at 
www.agrecycling.org. Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and 
continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank or 
collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 PSI for at 
least 30 seconds. Drain for 10 seconds after the flow begins to drip. 
[Paper Bag] Container Handling: Nonrefillable container. Do not reuse or refill this container. Completely empty bag 
into application equipment. Offer for recycling if available, or dispose of empty bag in a sanitary landfill or by 
incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of smoke. To find the nearest 
site, contact your chemical dealer or manufacturer, or contact The Agricultural Container Recycling Council (ACRC) at 
www.agrecycling.org. 
For help with any spill, leak, fire or exposure involving this material, call day or night CHEMTREC - 1-800-424-9300. 
 
CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY 
BEFORE BUYING OR USING THIS PRODUCT , read the entire Directions for Use and the following Conditions of Sale and 
Limitation of Warranty and Liability. By buying or using this product, the buyer or user accepts the following Conditions of Sa le and 
Limitation of Warranty and Liability, which no employee or agent of LOVELAND PRODUCTS, INC. or the seller is authorized to vary 
in any way.

56 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
Follow the Directions for Use of this product carefully. It is impossible to eliminate all risks inherently associated with the use of this 
product. Crop or other plant injury, ineffectiveness, or other unintended consequences may result from such risks as weather or crop 
conditions, mixture with other chemicals not specifically identified in this product’s label, or use of this product contrary t o the label 
instructions, all of which are beyond the control of LOVELAND PRODUCTS, INC. , and the seller. The buyer or user of this product 
assumes all such inherent risks. 
Subject to the foregoing inherent risks, LOVELAND PRODUCTS, I NC. warrants that this product conforms to the chemical 
description on the label and is reasonably fit for the purposes stated in the Directions for Use when the product is used in st rict 
accordance with such Directions for Use under normal conditions of use. EXCEPT AS WARRANTED IN THIS LABEL AND TO THE 
EXTENT CONSISTENT WITH APPLICABLE LAW, THIS PRODUCT IS SOLD “AS IS,” AND LOVELAND PRODUCTS, INC. MAKES 
NO OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO MERCHANTABILITY, FITNESS FOR A 
PARTICULAR PURPOSE, OR ELIGIBILITY OF THIS PRODUCT FOR ANY PARTICULAR TRADE USAGE. 
IN THE UNLIKELY EVENT THAT BUYER OR USER BELIEVES THAT LOVELAND PRODUCTS, INC. HAS BREACHED A 
WARRANTY CONTAINED IN THIS LABEL AND TO THE EXTENT REQUIRED BY APPLICABLE LAW, BUYER OR USER MUST 
SEND WRITTEN NOTICE OF ITS CLAIM TO THE FOLLOWING ADDRESS: LOVELAND PRODUCTS, INC., ATTENTION: LAW 
DEPARTMENT, P.O. BOX 1286, GREELEY, CO 80632-1286. 
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE BUYER’S OR USER’S EXCLUSIVE REMEDY FOR ANY INJURY, 
LOSS, OR DAMAGE RESULTING FROM THE HANDLING OR USE OF THIS PRODUCT, INCLUDING BUT NOT LIMITED TO 
CLAIMS OF BREACH OF WARRANTY OR CONTRACT, NEGLIGENCE, STRICT LIABILITY, OR OTHER TORTS, SHALL BE 
LIMITED TO ONE OF THE FOLLOWING, AT THE ELECTION OF LOVELAND PRODUCTS, INC. OR THE SELLER: DIRECT 
DAMAGES NOT EXCEEDING THE PURCHASE PRICE OF THE PRODUCT OR REPLACEMENT OF THE PRODUCT. TO THE 
EXTENT CONSISTENT WITH APPLICABLE LAW, LOVELAND PRODUCTS, INC.INC., AND THE SELLER SHALL NOT BE 
LIABLE TO THE BUYER OR USER OF THIS PRODUCT FOR ANY CONSEQUENTIAL, SPECIAL, OR INDIRECT DAMAGES, OR 
DAMAGES IN THE NATURE OF A PENALTY. 
 
[Ally, Canopy, Finesse, Glean, Harmony and Matrix are registered trademarks of E. I. DuPont de Nemours and Company ] 
[Amber, Bicep Lite II Magnum, Bicep II Magnum, Dual Magnum, Dual II Magnum, Eptam, Fusion, Gramoxone Inteon and 
Touchdown are registered trademarks of Syngenta Group Company ] 
[Basagran, Clarity, Dash, Guardsman Max, Laddock, Outlook, Poast Plus, Pursuit, Scepter and Squadron are registered 
trademarks of BASF] 
[Bullet, Harness, Intrro and Lariat are regist ered trademarks of Monsanto Technology LLC ] 
[Bromac, Intensity, Liberate, Makaze, Rifle, Rifle Plus and Stealth are registered trademarks of Loveland Products, 
Inc.] 
[Buctril and Sencor are registered trademarks of Bayer ] 
[Cadence, Sonalan and Topnotch are registered trademarks of Dow AgroSciences LLC ] 
[Command and Commence are registered trademarks of FMC Corporation ] 
[Far-Go is a registered trademark of Gowan Company LLC ] 
[Linex and Lorox are registered trademarks of Tessenderly Kerley,Inc. ] 
[Micro-Cel is a registered trademark of Imerys Minerals California, Inc. ] 
[Pentagon is a registered trademark of Makhteshim Agan Company ] 
[Resource is a registered trademark of Valent U.S.A. Corporation ] 
[All product trademarks belong to their respective companies.] 
 
 
[Optional Marketing Claims, Logos and Graphics] 
{Note to Reviewer: These logos and graphics or their respective components may be used throughout this label. The 
optional claims next to the logo are [HERBICIDE] [CROP PROTECTION]. The logo may be used by with one or more of 
the optional claims, or it may be used by itself.} 
[] [ ]

57 
[METRIBUZIN 75 
EPA REG. NO. 34704-876] 
 
 
{Note to Reviewer: the Loveland Logo may be used throughout the label.} 
 
[] [ ] 
 
 
 
 
FORMULATED FOR 
LOVELAND PRODUCTS, INC. 
P.O. BOX 1286, GREELEY, COLORADO [CO] 80634-1286 [USA]