crop-chem-docs/corpus/epa_ppls/34704-1085.md

# DYNA-SHIELD FM

- EPA Reg No: **34704-1085**
- Registrant: LOVELAND PRODUCTS, INC.
- Signal word: Caution
- Active ingredients: Fludioxonil (2.36%); Metalaxyl (15%)
- Label accepted: 2023-10-03
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/034704-01085-20231003.pdf

---
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY 
 WASHINGTON, DC 20460 
OFFICE OF CHEMICAL SAFETY 
AND POLLUTION PREVENTION 
 
Notification ABN or Label Acceptable v.20220527 
October 3, 2023 
 
Arianna Shorey 
Regulatory Consultant 
Loveland Products, Inc. 
c/o Pyxis Regulatory Consulting 
4110 136
th St. Ct. NW 
Gig Harbor, WA 98332 
 
Subject: Notification per PRN 98-10 – Minor label changes including grammatical 
revisions throughout label, adding emergency contact information, optional 
referral statements, optional logos, and other minor updates. 
 Product Name: Dyna-Shield FM 
 EPA Registration Number: 34704-1085 
 Application Date: June 12, 2023 
 Decision Number: 592822 
 
Dear Arianna Shorey: 
 
The Agency is in receipt of your Application for Pesticide Notification under Pesticide 
Registration Notice (PRN) 98-10 for the above referenced product. The Registration Division 
(RD) has conducted a review of this request for its applicability under PRN 98-10 and finds that 
the action requested falls within the scope of PRN 98-10. 
 
The label submitted with the application has been stamped “NOTIFICATION” and placed in our 
records. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please be 
aware that the website becomes labeling under the Federal Insecticide, Fungicide, and 
Rodenticide Act (FIFRA) and is subject to review by the Agency. If the website is false or 
misleading, the product would be misbranded and unlawful to sell or distribute under FIFRA 
section 12(a)(1)(E). 40 CFR 156.10(a)(5) lists examples of statements EPA may consider false or 
misleading. In addition, regardless of whether a website is referenced on your product’s label, 
claims made on the website may not substantially differ from those claims approved through the 
registration process. Therefore, should the Agency find or if it is brought to our attention that a 
website contains false or misleading statements or claims substantially differing from the EPA 
approved registration, the website will be referred to the EPA’s Office of Enforcement and 
Compliance. 
 
If you have any questions, please contact Stephanie Suarez at 202-566-2918 or at 
Suarez.Stephanie@epa.gov.

Page 2 of 2 
EPA Reg. No. 34704-1085 
Decision No. 592822 
 
 
 
 Sincerely, 
 
 
 
Stephanie Suarez, Ph.D., Plant Pathologist 
Fungicide Branch 
Registration Division (7505T) 
Office of Pesticide Programs

Page 1 
 
{Note to reviewer: [Text] in brackets denotes optional text. {Text} in braces denotes where in the final 
label text will appear and notes to reviewer.} 
 
 
 Dyna-Shield® FM 
For use as a seed treatment for protection of seed and seedlings 
against listed diseases[.] 
 
ACTIVE INGREDIENT: 
 Metalaxyl .............................................................................................................................................. 15.00% 
 Fludioxonil ............................................................................................................................................. 2.36% 
OTHER INGREDIENTS: ................................................................................................................................ 82.64% 
 TOTAL: 100.00% 
Contains 1.34 lbs metalaxyl and 0.21 lbs fludioxonil per gallon. 
KEEP OUT OF REACH OF CHILDREN 
CAUTION/PRECAICION 
FIRST AID 
If swallowed: • Call a poison control center or doctor immediately for treatment advice. 
• Have person sip a glass of water if able to swallow. 
• DO NOT induce vomiting unless told to by a poison control center or doctor. 
• DO NOT give anything by mouth to an unconscious person. 
Have the product container or label with you when calling a poison control center or doctor, or going for 
treatment. FOR A MEDICAL EMERGENCY INVOLVING THIS PRODUCT CALL: 1-866-944-8565. 
[See] [inside] [label] [booklet] [side] [panel] [for] [First Aid][,] [additional] [Precautionary Statements][,] [and] 
[Directions for Use] [including Storage and Disposal] [instructions][.] 
For Chemical Emergency: 
Spill, Leak, Fire, Exposure, or Accident, 
Call CHEMTREC Day or Night 
Within USA and Canada: 1-800-424-9300 or +1 703-527-3887 (collect calls accepted) 
 
EPA REGeg. NOo. 34704-1085 
EPA Est. No. XXXX-XX-XXX 
NET CONTENTS ____GALS. (___L) 
[PRINT CODE TO BE PLACED HERE] 
 
EPA EST. NO. [XXXX-XX-XXX] [BAR CODE] NET CONTENTS: ____GALS. (___L) 
[LOT NO. _____________] 
FORMULATED FOR 
Loveland Products, Inc.® P.O. Box 1286 Greeley, [CO][Colorado] 80632-1286 
 
 
METALAXYL GROUP 4 FUNGICIDE 
FLUDIOXONIL GROUP 12 FUNGICIDE 
[PEEL FILM HERE→] 
34704-1085
10/3/2023

Page 2 
 
PRECAUTIONARY STATEMENTS 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
CAUTION/PRECAUCION 
Harmful if swallowed. Wash thoroughly with soap and water after handling and before eating, drinking, chewing 
gum, using tobacco or using the toilet. 
PERSONAL PROTECTIVE EQUIPMENT (PPE) 
Applicators and other handlers must wear: 
• Long-sleeved shirt and long pants 
• Shoes plus socks 
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use 
detergent and hot water. Keep and wash PPE separately from other laundry. 
Engineering Controls Statement 
When handlers use closed systems in a manner that meets the requirements listed in the Worker Protection 
Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4 -6)], the handler PPE requirements may be 
reduced or modified as specified in the WPS. 
USER SAFETY RECOMMENDATIONS 
Users Should: 
• Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. 
• Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. 
• Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As 
soon as possible, wash thoroughly and change clothing. 
ENVIRONMENTAL HAZARDS 
This product is toxic to fish and aquatic invertebrates. For terrestrial use, DO NOT apply directly to water, to areas 
where surface water is present, or to intertidal areas below the mean high water mark. DO NOT contaminate water 
when disposing of equipment wash water or rinsate. Cover or incorporate spilled treated seeds. 
Groundwater Advisory: Metalaxyl is known to leach through soil into groundwater under certain conditions as a 
result of agricultural use. Use of this chemical where soils are permeable, particularly where the water table is 
shallow, may result in groundwater contamination. 
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
DO NOT apply this product in a way that will contact workers or other persons, either directly or through drift. Only 
protected handlers may be in the area during application. For any requirements specific to your State or Tribe, 
consult the agency responsible for pesticide regulation. 
 
{NOTE TO REVIEWER: [One of the following statements will be used on the final printed labeling. Loveland 
Products, Inc. reserves the option to choose the statement that will be used].} 
[{STATEMENT 1:} [Use the entire contents of Dyna -Shield FM in this container in the use season immediately 
following purchase from Loveland Products, Inc. Store at temperatures above 40° F but below 80° F.] 
{[STATEMENT 2:} [The Dyna-Shield FM in this container has been ma nufactured for use in this use season. Use 
the entire contents of Dyna -Shield FM in this container in the use season immediately following purchase from 
Loveland Products, Inc. Store at temperatures above 40° F but below 80° F. Remaining product is non-returnable.]

Page 3 
 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. 
This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and 
greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, 
notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the 
statements on this label about personal protective equipment (PPE) and restricted -entry interval. The 
requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. 
DO NOT enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 48 hours. 
Exception: If the seed is treated with the product and the treated seed is soil -injected or soil -incorporated, the 
Worker Protection Standard, under certain circumstances, allows workers to enter t he treated area if there will 
be no contact with anything that has been treated. PPE required for early entry to treated areas that is permitted 
under the Worker Protection Standard and that involves contact with anything that has been treated, such as 
plants, soil, or water, is: 
• Coveralls 
• Shoes plus socks 
 
PRODUCT INFORMATION 
Dyna-Shield® FM DYNA-SHIELD® FM is a seed treatment fungicide for use on soybeans, legumes, rice, and cotton 
to protect against damping -off and seed rots due to Pythium, Phytophthora, Fusarium, Rhizoctonia spp., and 
Phytophthora root rot. Dyna-Shield FM DYNA-SHIELD FM also suppresses seed-borne Sclerotinia and Phomopsis 
spp. particularly in soybeans. 
Mix thoroughly before use or use entire container at one time. 
Dyna-Shield FM DYNA-SHIELD FM contains an EPA approved dye/colorant that imparts an unnatural color to the 
seed. 
Dyna-Shield FM DYNA-SHIELD FM is formulated for on-farm or commercial seed treatment. 
Resistance Management Recommendations: Dyna-Shield FM contains metalaxyl, a Group 4 f ungicide, and 
fludioxonil, a Group 12 fungicide. Metalaxyl belongs to the phenylamide class of chemistry which interferes with 
fungal RNA synthesis. Fludioxonil belongs to the phenylpyrrole class of chemistry which interferes with osmotic 
signal transduction. 
Fungal populations may contain individuals naturally resistant to Group 4 and 12 fungicides and if used repeatedly 
in the same fields, then resistant members may eventually dominate the population. Because resistance 
development cannot be predicted, the us e of this product should conform to sound resistance management 
strategies such as an alternation with fungicides of a different mode of action and/or tank mixes established for the 
crop and use area. 
Use should be based on an IPM program that includes fi eld sanitation, scouting, historical information related to 
pesticide use, and crop rotation. The IPM program should also consider cultural, biological, and other chemical 
control practices. 
Loveland Products, Inc. encourages responsible product stewardsh ip to ensure effective long term control of the 
fungal diseases on this label. 
For additional information on Fungicide Resistance Management: 
• Contact Loveland Products, Inc. representatives at 1-888-[LPI-CUST] [[(]574-2878[)]]1-888-574-2878 
• Contact your local extension specialist or certified crop advisor. 
• Visit the Fungicide Resistance Action Committee (FRAC) at http://www.frac.info 
Planter Box Treatment: Apply at the specified rate and premix with the seed directly in the planter box at planting. 
Place half the amount of seed into the planter box and apply half the required amount of pesticide to the seed. Stir 
the seed thoroughly with a paddle until the s eed is uniformly coated. Place the remaining half of the seed into the 
planter box and add the remaining half of the pesticide. Again, stir the seed with the paddle until all seed is 
thoroughly coated.

Page 4 
 
Tank Mixing: All tank mixes should be pre-tested to determine physical compatibility between formulations. When 
tank mixing, follow the most restrictive label instructions for any tank mix partner. DO NOT tank mix with any product 
that bears a label prohibition against tank mixing. It is the pesticide user’s responsibility to ensure that all products 
are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for 
use on all product labels involved in tank mixing. Users must follow the most restrictive direc tions for use and 
precautionary statements of each product in the tank mixture. 
 
MIXING INSTRUCTIONS FOR SOYBEANS 
Dyna-Shield FM DYNA-SHIELD FM may be used with liquid rhizobia products that are resistant to fungicides; using 
standard mechanical slurry or mist-type seed treatment equipment which accurately measures and mixes a flowable 
seed treatment. The equipment must provide uniform coverage of Dyna-Shield FMDYNA-SHIELD FM on the seed. 
Uneven seed coverage may not give the desired level of disease control. Dyna-Shield FM DYNA-SHIELD FM must 
be diluted with either water or liquid inoculants prior to application to soybeans. Consult the manufacturer of the 
application equipment you plan to use for suitability for this ap plication and for instructions on operation and 
calibration of the equipment. 
In a clean container large enough to contain the entire mixture add the desired amount of Dyna-Shield FMDYNA-
SHIELD FM. Add half of the required water or liquid inoculant and mi x thoroughly. Add the remaining amount of 
water or liquid inoculant and mix again. The slurry is ready for application to the soybeans. Mix as needed and do 
not store diluted mixture. 
Additional or continuous agitation or mixing of the slurry mixture may b e necessary to prevent the DDyna-Shield 
FMYNA-SHIELD FM from settling out of solution when using water or liquid inoculants. Dyna-Shield FM DYNA-
SHIELD FM has been found to be compatible with some liquid inoculant products. Dyna-Shield FM DYNA-SHIELD 
FM may be mixed or applied sequentially with approved liquid inoculants. Consult the maker of the liquid inoculants 
and a Loveland Products, Inc.LOVELAND PRODUCTS, INC. representative for directions before applying Dyna-
Shield FM DYNA-SHIELD FM with liquid inoculants. 
Precaution: Dyna-Shield FM DYNA-SHIELD FM is specially formulated to be compatible with some liquid 
inoculants. If water is used to further dilute Dyna-Shield FM DYNA-SHIELD FM when rhizobia are present, use only 
nonchlorinated water. Chlorinated water will kill the live rhizobia contained in the inoculant. 
MIXING INSTRUCTIONS FOR SEED AND POD VEGETABLES, RICE, AND COTTON 
Apply Dyna-Shield FM DYNA-SHIELD FM as a water based slurry utilizing standard slurry seed treatment 
equipment which provides uniform seed coverage. Uneven or incomplete seed coverage may not give the desired 
level of disease protection. Thoroughly mix the labeled amount of Dyna-Shield FM DYNA-SHIELD FM into the 
required amount of water for the slurry treater and dilution rate to be used. 
Follow the manufacturer application instructions for the seed treatment equipment being used. Maintain constant 
agitation of the slurry during the treatment. Allow seed to dry before bagging. 
 
RESTRICTIONS: 
DO NOT use treated seed for feed, food, or oil. 
USE SPECIFICATIONS 
SOYBEANS 
DISEASE USE RATE (based on 3,000 seeds / lb) 
Protection against damping-off and 
seed rots caused by Pythium, 
Phytophthora, Fusarium, Rhizoctonia 
spp., and Phytophthora root rot. 
fl .oz. / 
100 lb. of 
seed** 
fl .oz. / 
1,000 seed 
fl .oz. / 
140,000 seed 
mg AI / 
seed 
1.5 0.005 0.7 0.0037 (fludioxonil) 
0.0237 (metalaxyl)

Page 5 
 
Suppresses seed-borne Sclerotinia 
and Phomopsis spp. 
**Contains 15.6 g of metalaxyl and 2.5 g of fludioxonil / 100 kg of 
seed. 
Apply Dyna-Shield FM DYNA-SHIELD FM at the rate specified in the rate table, plus water at 3.5 fl. oz. per 100 
lbs seed to obtain adequate coverage . Alternatively, approved liquid rhizobia inoculants at rates specified by 
manufacturer to achieve proper total slurry volumes can be used. 
The addition of an application of another approved metalaxyl or mefenoxam containing seed treatment product 
may be used if targeting fields with high Phytophthora pressure. Users must follow the most restrictive directions 
for use and precautionary statements of each product in the tank mixture. 
 
 
SEED AND POD VEG ETABLES: Black-Eyed Peas, Chickpeas, Garbanzos, Cowpeas, Field 
Beans, Field Peas, Garbanzos, Garden Peas, Green Beans, Kidney Beans, Lentils, Lima Beans, 
Lupines, Navy Beans, Okra, Peas, Pole Beans, Snap Beans, String Beans, and Wax Beans, and 
Lentils 
DISEASE USE RATE (fl .oz. / cwt. seed) 
Protection against damping-off and seed rots 
caused by Pythium, Phytophthora, Fusarium, 
Rhizoctonia spp., and Phytophthora root rot. 
Suppresses seed-borne Sclerotinia and 
Phomopsis spp. 
1.5 
 
 
RICE 
DISEASE USE RATE (based on 21,000 seeds / lb) 
Protection against early season soil and seed-
borne fungi which cause decay, damping off, and 
seedling blights including Pythium, Rhizoctonia, 
Fusarium. 
fl .oz. / 100 lb. of seed** mg AI / seed 
1.5 0.00053 (fludioxonil) 
0.00338 (metalaxyl) 
3.0 0.00106 (fludioxonil) 
0.00677 (metalaxyl) 
**Dyna-Shield FM DYNA-SHIELD FM contains 0.74 grams fludioxonil and 4.72 grams metalaxyl per fl .oz. 
RESTRICTIONS 
Not registered for use on rRice in California 
DO NOT use treated seed for feed, food, or oil. 
Forage must not be grazed until 30 days after planting. 
Bags or containers of Dyna-Shield FMDYNA-SHIELD FM treated rice must be labeled with the restriction: “DO 
NOT use metalaxyl or mefenoxam to control Pythium in water-seeded rice.”. 
 
 
COTTON 
DISEASE USE RATE (fl .oz. / 100 lb. of seed) 
Protection against seed and soil borne fungi such 
as Pythium, Rhizoctonia, and Fusarium that cause 
decay, damping-off, and seedling blights. 
1.5 to 3.0 
For protection against black rot, use Dyna-Shield FMDYNA-SHIELD FM in combination with SPERASpera™ 
240 FS (myclobutanil) or other seed treatment fungicide containing myclobutanil that is labeled for use on 
cotton seed. 
RESTRICTIONS 
DO NOT use treated seed for feed, food, or oil. 
SEED BAG LABELING REQUIREMENTS

Page 6 
 
Seed commercially treated with this product must be labeled in accordance with all applicable 
requirements of the Federal Seed Act. The user of this product is responsible for ensuring that the seed 
bag meets all requirements under the Federal Seed Act. 
THE FEDERAL SEED ACT FEDERAL LAW REQUIRES THAT BAGS OF TREATED SEEDS SHALL BE LABELED 
WITH THE FOLLOWING INFORMATION: 
• This seed has been treated with (metalaxyl and fludioxonil) seed treatment. 
• DO NOT use for food feed, or oil purposes. Store away from feeds and other foodstu ffs. 
 
U.S. ENVIRONMENTAL PROTECTION AGENCY REQUIRES THAT BAGS OF TREATED RICE SHALL BE 
LABELED WITH THE FOLLOWING INFORMATION: 
• “Forage must not be grazed until 30 days after planting” 
 
THE U.S. ENVIRONMENTAL PROTECTION AGENCY REQUIRES THE FOLLOWING STATEM ENTS ON 
CONTAINERS CONTAINING TREATED SEED: 
• Store treated seed away from food and feedstuffs. 
• Wear long pants, long-sleeved shirt, and protective gloves when handling treated seed. 
• Cover or collect treated seeds spilled during loading and planting. 
• Treated seed exposed on soil surface may be hazardous to wildlife. 
• Dispose of all excess treated seed by burying seed away from bodies of water. DO NOT contaminate bodies 
of water when disposing of planting equipment wash water. 
• DO NOT contaminate water bodies when disposing of planting equipment wash water. 
• DO NOT allow children, pets, or livestock to have access to treated seed. 
• DO NOT graze or feed livestock on treated areas for 30 days after planting. 
• Excess treated seed may be used for ethanol production only if (1) by -products are not used for livestock 
feed and (2) no measurable residues remain in the ethanol by-products that are used in agronomic practice. 
• Groundwater Advisory: Metalaxyl is known to leach through soil into groundwater under certain conditions 
as a result of agricultural use. Use of the chemical where soils are permeable, particularly where the water 
table is shallow, may result in groundwater contamination. 
• After the seeds have been planted, do not enter or allow work er entry into treated areas during the 
restricted-entry interval (REI) of 48 hours . Exception: If the treated seed is soil -injected or soil -
incorporated, the Worker Protection Standard, under certain circumstances, allows workers to enter the 
treated area if there will be no contact with anything that has been treated. PPE required for early entry to 
treated areas that is permitted under the Worker Protection Standard and that involves contact with anything 
that has been treated, such as plants, soil or wa ter is: coveralls, chemical -resistant gloves made of any 
waterproof material, and chemical-resistant footwear. 
 
STORAGE AND DISPOSAL 
Do not contaminate water, food or feed by storage or disposal. Do not store near oxidizing agents. 
PESTICIDE STORAGE: Store only in original container in locked storage areas. If a spill occurs, visible 
puddles or drops should be covered with a dry absorbent such as clay, sawdust, lime or soda ash. Sweep up 
and dispose of in a permitted disposal facility. Avoid cross-contamination with other pesticides and fertilizers 
during handling and storage. Do not store near heat or open flame. Protect from temperatures below 0 degrees 
F. Not for use or storage in or around the home. 
PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be disposed of on site or at an 
approved waste disposal facility. 
CONTAINER HANDLING: Nonrefillable container. Do not reuse this container to hold materials other than 
pesticides or dilute pesticides (rinsate). After emptying and cleaning, it may be allowable to temporarily hold 
rinsate or other pesticide-related materials in the container. Contact your state regulatory agency to determine 
allowable practices in your state. Once cleaned, some agricultural plastic pesticide containers ca n be taken to a 
container collection site or picked up for recycling. To find the nearest site, contact your chemical dealer or 
manufacturer, or contact The Agricultural Container Recycling Council (ACRC) at www.acrecycle.org . If not 
recycled, then puncture and dispose of in a sanitary landfill, or incineration, or if allowed by state and local 
authorities, by burning. If burned, stay out of smoke. Triple rinse or pressure rinse container (or equivalent) 
promptly after emptying.

Page 7 
 
For packages up to 5 gallons: Triple rinse as follows: Empty the remaining contents into application 
equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container ¼ full with 
water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate 
for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more 
times. Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank an d 
continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application 
equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of 
the container, and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins to 
drip. 
For packages greater than 5 gallons and less than 56 gallons: Triple rinse as follows: Empty the 
remaining contents into application equipment or a mix tank. Fill the container ¼ full with water. Replace and 
tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, 
for 30 seconds. Stand the container on its end and tip it back and forth several times. Turn the container over 
onto its other end and tip it back and forth several times. Empty the rinsate into application equipment or a mix 
tank or store rinsate for later use or disposal. Repeat this procedure two more times. Pressure rinse as 
follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 
seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank or 
collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse 
at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. 
For packages greater than 56 gallons: To clean the container before final disposal, empty the remaining 
contents from this container into application equipment or mix tank. Fill the container about 10 p ercent full with 
water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application 
equipment or rinsate collection system. Repeat this rinsing procedure two more times. 
For refillable containers: Refill this container with pesticide only. Do not reuse this container for any other 
purpose. Cleaning the container before final disposal is the responsibility of the person disposing of the 
container. 
Cleaning before refilling is the responsibility of the refiller. To clean the container before final disposal, empty 
the remaining contents from this container into application equipment or mix tank. Fill the container about 10 
percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes . Pour or pump 
rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times. 
Offer for recycling or reconditioning, if available, or puncture and dispose of in a sanitary landfill, or by other 
procedures approved by state and local authorities. 
For help with any spill, leak, fire or exposure involving this material, call day or night CHEMTREC – 1-
800-424-9300. 
 
CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY 
BEFORE BUYING OR USING THIS PRODUCT, read the entire Directions for Use and the following Conditions of 
Sale and Limitation of Warranty and Liability. By buying or using this product, the buyer or user accepts the following 
Conditions of Sale and Limitation of Warranty and Liability, which no employee or agent of LOVELAND 
PRODUCTS, INC. or the seller is authorized to vary in any way. 
 
Follow the Directions for Use of this product carefully. It is impossible to eliminate all risks inherently associated 
with the use of this product. Cro p or other plant injury, ineffectiveness, or other unintended consequences may 
result from such risks as weather or crop conditions, mixture with other chemicals not specifically identified in this 
product’s label, or use of this product contrary to the la bel instructions, all of which are beyond the control of 
LOVELAND PRODUCTS, INC. and the seller. To the extent consistent with applicable law the buyer or user of this 
product assumes all such inherent risks. 
 
Subject to the foregoing inherent risks, LOVEL AND PRODUCTS, INC. warrants that this product conforms to the 
chemical description on the label and is reasonably fit for the purposes stated in the Directions for Use when the 
product is used in strict accordance with such Directions for Use under normal conditions of use. EXCEPT AS 
WARRANTED IN THIS LABEL AND TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THIS PRODUCT 
IS SOLD “AS IS,” AND LOVELAND PRODUCTS, INC. MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, 
INCLUDING BUT NOT LIMITED TO MERCHANTABILITY, FITN ESS FOR A PARTICULAR PURPOSE, OR 
ELIGIBILITY OF THIS PRODUCT FOR ANY PARTICULAR TRADE USAGE.

Page 8 
 
IN THE UNLIKELY EVENT THAT BUYER OR USER BELIEVES THAT LOVELAND PRODUCTS, INC. HAS 
BREACHED A WARRANTY CONTAINED IN THIS LABEL AND TO THE EXTENT REQUIRED BY APPLICABLE 
LAW, BUYER OR USER MUST SEND WRITTEN NOTICE OF ITS CLAIM TO THE FOLLOWING ADDRESS: 
LOVELAND PRODUCTS, INC., ATTENTION: LAW DEPARTMENT, P.O. BOX 1286, GREELEY, CO 80632-1286. 
 
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE BUYER’S OR USER’S EXCLUSIVE REMEDY 
FOR ANY INJURY, LOSS, OR DAMAGE RESULTING FROM THE HANDLING OR USE OF THIS PRODUCT, 
INCLUDING BUT NOT LIMITED TO CLAIMS OF BREACH OF WARRANTY OR CONTRACT, NEGLIGENCE, 
STRICT LIABILITY, OR OTHER TORTS, SHALL BE LIMITED TO ONE OF THE FOLLOWING, AT THE ELECTION 
OF LOVELAND PRODUCTS, INC. OR THE SELLER: DIRECT DAMAGES NOT EXCEEDING THE PURCH ASE 
PRICE OF THE PRODUCT OR REPLACEMENT OF THE PRODUCT. TO THE EXTENT CONSISTENT WITH 
APPLICABLE LAW, LOVELAND PRODUCTS, INC. AND THE SELLER SHALL NOT BE LIABLE TO THE BUYER 
OR USER OF THIS PRODUCT FOR ANY CONSEQUENTIAL, SPECIAL, OR INDIRECT DAMAGES, OR 
DAMAGES IN THE NATURE OF A PENALTY. 
 
 
Dyna-Shield is and LOVELAND PRODUCTS, INC. are registered trademarks of Loveland Products, Inc. 
Spera is a trademark of Nufarm Americas Inc. 
 
FORMULATED FOR: 
LOVELAND PRODUCTS, INC. 
P.O.BOX 1286 
GREELEY, CO 80632 
 
{OPTIONAL GRAPHICS} 
{Note to Reviewer: Any of the below graphics may appear anywhere on the label. Further, any of the below 
graphics may appear in various colors or black/white; not to impact legibility.} 
 
[ ] 
 
[ ]