crop-chem-docs/corpus/epa_ppls/34704-1093.md

DOG FIGHT

• EPA Reg No: 34704-1093
• Registrant: LOVELAND PRODUCTS, INC.
• Signal word: Warning
• Active ingredients: Imazethapyr (1.8%); Glyphosate (22%)
• Label accepted: 2016-11-18
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/034704-01093-20161118.pdf

---

UNITED STATES ENVIRONMENTAL PROTECTION AGENCY WASHINGTON, DC 20460

PRIA Non-New-Use Label and CSF Acceptable v.20150320 OFFICE OF CHEMICAL SAFETY AND POLLUTION PREVENTION November 18, 2016

Robert Avalos Manager of Registrations Loveland Products Inc. P.O. Box 1286 Greeley, CO 80632-1286

Subject: PRIA Label and CSF Amendment – Revising basic and adding alternate (Alt A, B, C, and D) CSFs Product Name: Dog Fight EPA Registration Number: 34704-1093 Application Date: June 27, 2016 Decision Number: 518895

Dear Mr. Avalos:

The amended label and CSFs referred to above, submitted in connection with registration under the Federal Insecticide, Fungicide and Rodenticide Act, as amended, are acceptable. This approval does not affect any conditions that were previously imposed on this registration. You continue to be subject to existing conditions on your registration and any deadlines connected with them.

A stamped copy of your labeling is enclosed for your records. This labeling supersedes all previously accepted labeling. You must submit one copy of the final printed labeling before you release the product for shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may distribute or sell this product under the previously approved labeling for 18 months from the date of this letter. After 18 months, you may only distribute or sell this product if it bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3.

Please note that the record for this product currently contains the following CSFs:

 Basic CSF dated 6/27/2016  Alternate CSF A dated 6/27/2016  Alternate CSF B dated 6/27/2016  Alternate CSF C dated 6/27/2016  Alternate CSF D dated 6/27/2016

Should you wish to add/retain a reference to the company’s website on your label, then please be aware that the website becomes labeling under the Federal Insecticide Fungicide and Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40

Page 2 of 2 EPA Reg. No. 34704-1093 Decision No. 518895

CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims made on the website may not substantially differ from those claims approved through the registration process. Therefore, should the Agency find or if it is brought to our attention that a website contains false or misleading statements or claims substantially differing from the EPA approved registration, the website will be referred to the EPA’s Office of Enforcement and Compliance.

Your release for shipment of the product constitutes acceptance of these conditions. If these conditions are not complied with, the registration will be subject to cancellation in accordance with FIFRA section 6. If you have any questions, please contact Emily Schmid by phone at 703- 347-0189, or via email at [email protected].

Enclosure

Sincerely,

Reuben Baris, Product Manager 25 Herbicide Branch Registration Division (7505P) Office of Pesticide Programs

1

GROUP 2 9 HERBICIDE DOG FIGHT™ For use in soybeans, Clearfield® corn, and Roundup Ready® alfalfa Active Ingredients: imazethapyr: (±)-2-[4,5-dihydro-4-methyl-4-(1-methylethyl)-5-oxo-1H-imidazol-2-yl]-5-ethyl-3-pyridinecarboxylic ............................................. 1.80% glyphosate: N-(phosphonomethyl)glycine, in the form of its isopropylamine salt* ................................................................................................... 22.00% Other Ingredients: ..................................................................................................................................................................................................... 76.20% Total 100.00% Contains 2.17 pounds of active ingredient per gallon (0.17 pound acid equivalent of imazethapyr and 2.0 pounds of glyphosate as the isopropylamine salt) *1.48 pounds glyphosate acid per gallon

KEEP OUT OF REACH OF CHILDREN WARNING/AVISO Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do not understand this label, find someone to explain it to you in detail.)

For Additional Precautionary Statements, Directions for Use, Storage and Disposal and Other Use Information, See Inside This Label Booklet.

FIRST AID If in eyes x Hold eyes open and rinse slowly and gently with water for 15 to 20 minutes. x Remove contact lenses, if present, after the first 5 minutes; then continue rinsing eyes. x Call a poison control center or doctor for treatment advice. If on skin or clothing x Take off contaminated clothing. x Rinse skin immediately with plenty of water for 15 to 20 minutes. x Call a poison control center or doctor for treatment advice. If swallowed x Call a poison control center or doctor immediately for treatment advice. x Have person sip a glass of water if able to swallow. x DO NOT induce vomiting unless told to by a poison control center or doctor. Note to Physician: Probable mucosal damage may contraindicate the use of gastric lavage. HOTLINE NUMBER Have the product container or label with you when calling a poison control center or doctor, or going for treatment. FOR A MEDICAL EMERGENCY INVOLVING THIS PRODUCT CALL: 1-866-944-8565.

EPA REG. NO. 34704-1093

EPA EST. NO. 34704-MS-001

NET CONTENTS: 2.5 GAL (9.46 L)

EXP 0716 11/18/2016 34704-1093

2

Precautionary Statements Hazards to Humans and Domestic Animals WARNING. Causes substantial but temporary eye injury. DDo not get in eyes or on clothing. Harmful if absorbed through skin. Avoid contact with skin.

Personal Protective Equipment (PPE) Some materials that are chemically resistant to this product are listed below. If you want more options, follow the instruction s for CCategory A on an EPA chemical-resistance category selection chart.

Applicators and other handlers must wear: x Long-sleeved shirt and long pants x Chemical-resistant gloves, including butyl rubber • 14 mils, or natural rubber • 14 mils, or neoprene rubber • 14 mils, or nitrile rubber • 14 mils x Shoes plus socks x Protective eyewear

Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product’s concentrate. D DO NOT reuse them. Follow manufacturer’s instructions for cleaning and maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry.

USER SAFETY RECOMMENDATIONS Users should: x Wash hands thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco, or using the toilet. x Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.

Environmental Hazards DO NOT apply directly to water, or to areas where surface water is present, or to intertidal areas below the mean high water mark. D DO NOT contaminate water when disposing of equipment wash water or rinsate.

Groundwater Advisory and Proper Handling Instructions Imazethapyr has properties and characteristics associated with chemicals detected in groundwater. The use of imazethapyr in are as where soils are permeable, particularly where the water table is shallow, may result in groundwater contamination.

Do not mix or load this product within 50 feet of any wells (including abandoned wells and drainage wells), sinkholes, perennial or intermittent streams and rivers, and natural or impounded lakes or reservoirs. This setback does not apply to properly capped or plugged abandoned wells and does not apply to impervious pad or properly diked mixing/loading areas.

Operations that involve mixing, loading, rinsing, or washing of this product into or from pesticide handling or application equ ipment or containers within 50 feet of any well are prohibited unless conducted on an impervious pad constructed to withstand the weight of the heaviest lo ad that may be positioned on or moved across the pad. Such a pad shall be designed and maintained to contain any product spills or equipment leaks, conta iner or equipment rinse or wash water, and rainwater that may fall on the pad. Surface water shall not be allowed to either flow over or from the pad, which means the pad must be self-contained. The pad shall be sloped to facilitate material removal. An unroofed pad shall be of sufficient capacity to cont ain at a minimum 110% of the capacity of the largest pesticide container or application equipment on the pad. A pad that is covered by a roof of sufficient size to completely exclude precipitation from contact with the pad shall have a minimum containment capacity of 100% of the capacity of the largest pestic ide container or application equipment on the pad. Containment capacities as described above shall be maintained at all times.

The above specific minimum containment capacities do not apply to vehicles when delivering pesticide shipments to the mixing/lo ading site. States may have in effect additional requirements regarding wellhead setbacks and operational containment.

DO NOT apply this product through any type of irrigation system.

Product must be used in a manner which will prevent back siphoning in wells, spills or improper disposal of excess pesticide spray mixture.

Physical – Chemical Hazards Do not mix or allow coming into contact with oxidizing agent. Hazardous chemical reaction may occur.

3

DIRECTIONS FOR USE It is a violation of federal law to use this product in a manner inconsistent with its labeling. DO NOT apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handl ers may be in the area during application. For any requirements specific to your state or tribe, consult the agency responsible for pesticide regulation.

This label must be in the possession of the user at the time of herbicide application. Not for sale, sale into, distribution and/or use in Nassau and Suffolk Counties of New York State.

AGRICULTURAL USE REQUIREMENTS Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This standard c ontains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertai ning to the statements on this label about personal protective equipment (PPE) and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. DO NOT enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 48 hours. PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plant, soil, or water, is: x Coveralls x Protective eyewear x Chemical-resistant gloves, including butyl rubber • 14 mils, or natural rubber • 14 mils, or neoprene rubber • 14 mils, or nitrile rubber • 14 mils x Shoes plus socks

Product Information Dog Fight™ provides burndown and residual control of many broadleaf and grass weeds in soybeans, CClearfield® corn, and RRoundup Ready® alfalfa. Dog Fight may be applied postemergence to RRoundup Ready soybeans and RRoundup Ready alfalfa for season-long weed control. DDog Fight is effective for difficult-to-control weeds common to no-till production, including marestail.

Occasionally, internode shortening and/or temporary yellowing of crop plants may occur following an D Dog Fight application. These effects occur infrequently and are usually temporary.

Dog Fight is a mixture of two active ingredients: imazethapyr and glyphosate, which inhibit acetolactate synthase/acetohydroxyacid synth ase (ALS/AHAS) and 5-enolpyruvylshikimate-3-phosphate synthase (EPSPS), respectively. Weed populations may contain plants naturally resistant to various herbicide modes of action. Weed populations have been identi fied that are resistant to ALS/AHAS and/or EPSPS herbicides. Naturally occurring biotypes of some of the weeds listed on this label may not be effectively controlled by this and/or other products with either the ALS/AHAS and/or EPSPS modes of action. If resistant bio-types occur in the field, incorporate additional control methods for effective weed control such as additional approved herbicides with alternate modes of action or mechanical means.

Application Information Postemergence Dog Fight applied postemergence is effective in controlling weeds in conservation tillage as well as in conventional production systems. Apply DDog Fight to crops and weeds that are actively growing; base application timing on weed size and not crop growth stage.

A nonionic surfactant A AND a nitrogen-based fertilizer must be added to the spray solution for optimum weed control. Apply NIS at 0.125% v/v of spray solution AAND AMS at 2.5 lbs/A. See MMixing Instructions for directions.

When D Dog Fight is applied postemergence, absorption will occur through both the roots and foliage. Susceptible weeds stop growing and either die or are not competitive with the crop. DDog Fight not only controls many existing broadleaf and grass weeds when applied postemergence, it also provides control of susceptible weeds that may emerge after application.

For maximum weed control where cultivation is possible, cultivate 7 to 10 days following a postemergence D Dog Fight application to enhance residual weed control, especially under dry conditions.

Apply D Dog Fight a minimum of 1 hour before rainfall or overhead irrigation.

4

Unusually cool temperatures (50 °F or less) reduce photosynthesis and transpiration and, thus, reduce uptake, translocation, an d weed control efficacy of Dog Fight. If air temperature has been below 50 °F for 10 or more hours, delay D Dog Fight application for 48 hours after the temperature increases above 50 °F to improve weed control and reduce crop response.

Mixing Instructions Burndown or postemergence applications of DDog Fight require the addition of a surfactant AAND fertilizer.

Surfactant Use a nonionic surfactant containing at least 80% active ingredient. Apply the surfactant at 1 pint per 100 gallons of spray mixture (0.125% volume/volume of the spray mixture). Use only surfactants approved for application to growing crops. AND Fertilizer Include a fertilizer in the spray solution. Add spray grade ammonium sulfate at 8.5 to 17 pounds per 100 gallons of spray solut ion. Use the higher rate when weeds are under moisture or temperature stress.

Mixing Order

1. Water - Begin by agitating a thoroughly clean sprayer tank 1/2 full with clean water.
2. Agitation - Maintain continuous and constant agitation throughout.
3. Fertilizer
4. Dog Fight - Mix thoroughly.
5. Surfactant
6. Remaining quantity of water Application Instructions DO NOT apply when winds are gusty, under low-level inversion conditions or under other conditions that favor drift. Maintain appropri ate buffer zones between treated fields and adjacent desirable vegetation. Exposed leaves or other green tissue may be damaged or killed by drif t from DDog Fight. Severe injury or plant death may result if DDog Fight contacts foliage of desirable plants. To prevent injury to desirable plants and crops, DDO NOT allow spray drift to occur.

DO NOT allow the herbicide solution to drift onto desirable vegetation. Very small amounts of drift may cause injury or death to desi rable crops or plants. The likelihood of injury from use of this product increases when winds are gusty. The risk of injury from this product increase s when wind direction is constantly changing or during inversion conditions or other weather conditions that favor drift. Do not make applications using high spray pressure and high speed. These contribute to conditions that favor small spray droplets and drift.

When D Dog Fight is used in combination with another herbicide, refer to the respective label for rates, methods of application, proper timing, weeds controlled, restrictions and precautions. Always use in accordance with the more restrictive label restrictions and precautions . DDO NOT exceed label dosages. DDO NOT mix DDog Fight with any product containing a label prohibiting such mixtures. To avoid injury to sensitive crops, drain spray equipment used for DDog Fight applications and thoroughly clean with water before applying other products.

Drift Control Additives Drift control additives may be included in either ground or aerial applications. When a drift control agent is used, read and c arefully observe the precautionary statements and all other information appearing on the additive label.

Ground Application Uniformly apply with properly calibrated ground equipment in 10.0 or more gallons of water per acre. Use a spray pressure of 20 to 40 psi.

To ensure thorough coverage, use a minimum of 20.0 gallons of water per acre when applying D Dog Fight to minimum or no-till crops. Use higher gallonage for fields with dense vegetation or heavy crop residues. Adjust the boom height to ensure proper coverage of weed fol iage (according to the manufacturer’s recommendation). Use only flat-fan nozzle tips for postemergence applications.

Avoid overlaps when spraying.

5

Low-volume Spray Application Dog Fight may be applied with a low-volume sprayer. When applying D Dog Fight with a low-volume sprayer, spray the weeds before they reach the maximum size listed in this label. Weed control is dependent upon good spray coverage of the weeds. The sprayer must be calibra ted to deliver the specified spray volume and pressure to ensure adequate spray coverage of the weeds. When applying D Dog Fight with a low-volume sprayer, apply a minimum of 10.0 gallons per acre of spray solution with a nozzle pressure between 40 to 60 psi for optimum coverage. Lower nozzle pressure will minimize the potential for drift to desirable vegetation.

Aerial Application Uniformly apply with properly calibrated aerial equipment in 5.0 or more gallons of water per acre.

When applied p postemergence, the addition of a nonionic surfactant A AND fertilizer solution are required for optimum weed control. Apply nonionic surfactant (NIS) at 0.125%volume to volume (v/v) of spray solution A AND ammonium sulfate (AMS) at 2.5 pounds per acre. See P Postemergence instructions in AApplication Information section.

Avoiding spray drift at the application site is the responsibility of the applicator. The interaction of many equipment-related and weather-related factors determines the potential for spray drift. The applicator and the grower are responsible for considering all these factors when making decisions.

The following drift management requirements must be followed to avoid off-target drift movement from aerial applications to agr icultural field crops. These requirements D DO NOT apply to forestry applications, public health uses, or to applications using dry formulations.

1. The distance of the outermost nozzles on the boom must not exceed 3/4 the length of the wingspan or rotor.
2. Nozzles must always point backward parallel with the airstream and never be pointed downward more than 45 degrees.

Observe more stringent state regulations, if applicable.

The applicator should be familiar with and take into account the information covered in the aerial drift reduction advisory information presented below.

Information on Droplet Size The most effective way to reduce drift potential is to apply large droplets. The best drift management strategy is to apply the largest droplets that provide sufficient coverage and control. Applying larger droplets reduces drift potential but will not prevent drift if applications ar e made improperly or under unfavorable environmental conditions (ssee Wind; Temperature and Humidity; and TTemperature Inversions).

Controlling droplet size: x Volume - Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with higher rated flows produce larger droplets. x Pressure - DO NOT exceed the nozzle manufacturer’s recommended pressures. For many nozzle types, lower pressure produces larger droplets. When higher flow rates are needed, use higher flow rate nozzles instead of increasing pressure. x Number of Nozzles - Use the minimum number of nozzles that provide uniform coverage. x Nozzle Orientation - Orienting nozzles so that the spray is released parallel to the airstream produces larger droplets than other orientations and is recommended practice. Significant deflection from the horizontal will reduce droplet size and increase drift potential. x Nozzle Type - Use a nozzle type that is designed for the intended application. With most nozzle types, narrower spray angles produce larger droplets. Consider using low-drift nozzles. Solid-stream nozzles oriented straight back produce the largest droplets and the lowest drift.

Boom Length For some use patterns, reducing the effective boom length to less than 3/4 of the wingspan or rotor length may further reduce d rift without reducing swath width.

Application Height Applications should not be made at a height greater than 10 feet above the top of the largest plants unless a greater height is required for aircraft safety. Making applications at the lowest height that is safe reduces exposure of droplets to evaporation and wind.

Swath Adjustment When applications are made with a crosswind, the swath will be displaced downwind. Therefore, on the upwind and downwind edges of the field, the applicator must compensate for this displacement by adjusting the path of the aircraft upwind. Swath adjustment distance should increase with increasing drift potential (higher wind, smaller droplets, etc.).

6

Wind Drift potential is lowest between wind speeds of 2 to 10 mph. However, many factors, including droplet size and equipment type, determine drift potential at any given speed. Application should be avoided below 2 mph due to variable wind direction and high inversion potential. NOTE: Local terrain can influence wind patterns. Every applicator should be familiar with local wind patterns and how they affect spray drift.

Temperature and Humidity When making applications in low relative humidity, set up equipment to produce larger droplets to compensate for evaporation. Droplet evaporation is most severe when conditions are both hot and dry.

Temperature Inversions Applications should not occur during a temperature inversion because drift potential is high. Temperature inversions restrict v ertical air mixing, which causes small suspended droplets to remain in a concentrated cloud. This cloud can move in unpredictable directions due to the l ight, variable winds common during inversions. Temperature inversions are characterized by increasing temperatures with altitude and are common on n ights with limited cloud cover and light-to-no wind. They begin to form as the sun sets and often continue into the morning. Their presence can be indicated by ground fog; however, if fog is not present, inversions can also be identified by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves u pward and rapidly dissipates indicates good vertical air mixing.

Sensitive Areas The pesticide should only be applied when the potential for drift to adjacent sensitive areas (e.g. residential areas, bodies o f water, known habitat for threatened or endangered species, or nontarget crops) is minimal (e.g. when wind is blowing away from the sensitive areas).

Applicator is responsible for any loss or damage which results from spraying D Dog Fight in a manner other than specified in this label. In addition, applicator must follow all applicable state and local regulations and ordinances in regard to spraying.

Soybeans DO NOT apply Dog Fight postemergence to non-Roundup Ready soybeans.

North Dakota and north of Highway #210 in Minnesota only. Apply DDog Fight at 2.25 pints per acre. One gallon of DDog Fight will treat 3.6 acres at this rate. DDO NOT exceed 2.25 pints per acre per season.

Burndown Weed Control Prior to Soybean Emergence (no-till and stale seedbed) Apply DDog Fight at 3.0 pints per acre for burndown of weeds in no-till soybeans. D Dog Fight may be applied prior to planting or preemergence of any soybean variety (including RRoundup Ready or non-RRoundup Ready soybeans). Add 2,4-D to the spray tank for enhanced control of perennial weeds including horseweed/marestail and hemp dogbane. Tank mix with SSharpen® herbicide or VVerdict™ herbicide prior to soybean planting/emergence to enhance the burndown speed and increase weed spectrum including glyphosate-resistant horseweed.

For season-long grass control and enhanced waterhemp control, apply P Prowl® H2O herbicide prior to planting soybeans. A postemergence application of Dog Fight will control any escaped weeds and provide season-long control of most broadleaf and grass weeds. Apply D Dog Fight postemergence only to Roundup Ready soybean. Postemergence applications of DDog Fight to non-RRoundup Ready soybean will kill the soybean.

When mixing D Dog Fight with 2,4-D or PProwl H2O, always use in accordance with the more restrictive label limitations and precautions. DDO NOT exceed label rates. DDO NOT mix DDog Fight with any product containing a label prohibition against such mixing.

When organophosphate (such as chlorpyrifos) or carbamate insecticides are tank mixed with D Dog Fight, temporary injury may result to the treated crop.

In-crop Postemergence Weed Control in Roundup Ready Soybeans Dog Fight may be applied for postemergence weed control in RRoundup Ready soybeans. Apply DDog Fight for general weed burndown and season-long control of broadleaf and grass weeds. To minimize weed competition, apply DDog Fight at 3.0 pints per acre to weeds 1 to 8 inches high. One gallon of DDog Fight will treat 2.7 acres of soybeans at this rate.

7

Fall Applications in a Planned Sequential Program Apply DDog Fight at 3.0 pints per acre after fall harvest and prior to ground freeze in the winter. Fall applications of D Dog Fight will control existing weeds and provide residual control of winter annual weeds and early spring germinating weeds in soybeans. Soybeans must be planted in the spring following the fall application of DDog Fight. If weeds emerge in season, other registered soybean products may be applied postemergence for weed control. NOTE: For fall applications of DDog Fight, base the rotational crop intervals on the date of soybean planting, not the date of herbicide application.

No-till/Minimum Tillage and Double Crop Soybeans Apply DDog Fight at 3.0 pints per acre. DDog Fight controls existing weeds and provides residual control of most weeds when applied early postemergence to RRoundup Ready soybeans in no-till or minimum tillage and double crop soybean production systems. Apply DDog Fight before or after crop emergence. Only RRoundup Ready soybeans can be treated after crop emergence. Refer to the WWeeds Controlled chart for weeds controlled and specific weed size.

Tank mix P Prowl H2O with DDog Fight for burndown weed control to provide season-long control of grass weeds and enhance control of waterhemp.

Tank mix SSharpen or VVerdict to enhance burndown speed and increase weed spectrum including glyphosate-resistant horseweed.

For improved burndown weed control, D Dog Fight may be tank mixed with 2,4-D. Refer to the 2,4-D label for application rates and intervals between application and planting.

It is the pesticide user’s responsibility to ensure that all products in the listed mixtures are registered for the intended us e. Users must follow the most restrictive directions and precautionary language of the products in the mixture (for example, first aid from one product, spra y drift management from another).

Soybean (Roundup and non-Roundup Ready) Restrictions x DO NOT apply DDog Fight postemergence to non-RRoundup Ready-resistant soybeans. x DO NOT harvest soybeans for at least 85 days after DDog Fight application. x DO NOT graze or feed treated soybean forage, hay or straw to livestock. x If soybeans are furrow irrigated, till the soil prior to planting winter wheat or barley. Break up beds and mix the soil with t illage equipment set to cut 4 to 6 inches deep. x Make DDog Fight applications before soybean bloom. x Make only one application of DDog Fight per soybean growing season. x DO NOT exceed 3.0 pints per acre of DDog Fight per season. x North Dakota; north of Highway #210 in Minnesota Only - Apply DDog Fight at 2.25 pints per acre. DDO NOT exceed 2.25 pints per acre per season.

Clearfield® Corn Fall or Spring Burndown Application in a Planned Sequential Program with Lightning® herbicide applied to Clearfield Corn

Kentucky and Tennessee; South of Interstate 70 in Indiana Only Dog Fight may be applied at 3.0 pints per acre as a fall or spring burndown application prior to planting CClearfield corn and/or prior to using LLightning in-crop to CClearfield corn. x DO NOT apply DDog Fight to emerged CClearfield corn or crop injury will occur. x DO NOT apply CCounter® 15G insecticide to preplant CClearfield corn acres treated with DDog Fight or crop injury can occur. x DO NOT plant wheat in the same year as application of DDog Fight followed by LLightning unless at least 10 inches of rainfall or overhead irrigation has occurred between application of DDog Fight and wheat planting.

Roundup Ready® Alfalfa Dog Fight provides contact and residual control of many broadleaf and grass weeds in RRoundup Ready alfalfa.

Dog Fight can be applied postemergence to seedling or established RRoundup Ready alfalfa or to dormant or semi-dormant established RRoundup Ready alfalfa grown for forage, hay, or seed. Roundup Ready alfalfa is tolerant to postemergence applications of D Dog Fight. DDog Fight, if applied to non- Roundup Ready alfalfa, will cause severe crop injury and crop loss.

Apply DDog Fight at a broadcast rate of 2.2 to 4.4 pints per acre postemergence only to seedling or established R Roundup Ready alfalfa grown for forage, hay, or seed. Allow a minimum of 7 days between sequential applications. x Maximum Seasonal Use Rate - A maximum of 0.094 lb ae/A of imazethapyr (4.4 pints per acre of D Dog Fight) per year may be applied to RRoundup Ready alfalfa.

8

x DO NOT apply more than 3.0 pints per acre of DDog Fight to RRoundup Ready alfalfa during the last year of the stand.

Seedling Roundup Ready Alfalfa Dog Fight must be applied postemergence to seedling R Roundup Ready alfalfa. Apply DDog Fight when the seedling RRoundup Ready alfalfa is in the second trifoliate stage or larger and when the majority of the weeds are 1 to 3 inches. For low growing weeds (such as mustards ), apply DDog Fight before the rosette exceeds 3 inches. Because of the biology and breeding constraints of alfalfa, up to 10% of the seedlings may not contain a R Roundup Ready gene and will not survive or thrive after the first application of DDog Fight. To limit undesirable effects of stand gaps created by the loss of plants not containing a R Roundup Ready gene, apply a single DDog Fight application of at least 3.0 pints per acre at or before the 3 to 4 trifoliate growth stage.

Established Roundup Ready Alfalfa Dog Fight can be applied to established RRoundup Ready alfalfa in the fall, in the spring to dormant or semi-dormant RRoundup Ready alfalfa (less than 3 inches of regrowth), or between cuttings. For weed control between alfalfa cuttings, apply DDog Fight following RRoundup Ready alfalfa cutting and removal of the hay from the field. Make any application before significant RRoundup Ready alfalfa growth or regrowth (3 inches) to allow DDog Fight to reach target weeds.

Replanting If replanting is necessary in a field previously treated with DDog Fight, DDO NOT plant alfalfa for 4 months following an DDog Fight application.

Roundup Ready Alfalfa Restrictions x DO NOT apply DDog Fight at more than 3.0 pints per acre in North Dakota or Minnesota north of Highway #210. x DO NOT apply more than 3.0 pints per acre of DDog Fight to RRoundup Ready alfalfa during the last year of the stand. x Maximum Seasonal Use Rate - A maximum of 0.094 lb ae/A of imazethapyr (4.4 pints per acre of D Dog Fight) per year may be applied to R Roundup Ready alfalfa. x Preharvest Interval (PHI) - DDO NOT feed, graze, or harvest RRoundup Ready alfalfa for 30 days following an application of D Dog Fight to RRoundup Ready alfalfa.

Weeds Controlled Broadleaf Weeds Maximum Size (inches) Alligator weed 5 Amaranth, Palmer* 4 Anoda, spurred 3 Artichoke, Jerusalem 8 Bedstraw, catchweed 3 Beet, wild 5 Bristly starbur 3 Buckwheat, wild 4 Buffalobur 5 Burcucumber 8 Carpetweed 8 Chickweed 8 Cocklebur, common* 8 Copperleaf, hophornbeam 2 Copperleaf, Virginia 2 Corn, volunteer 20 Eclipta 8 Fleabane, annual 8 Fleabane, hairy 8 Fleabane, rough 6 Flixweed 3 Hemp sesbania 2 Horseweed/Marestail* 8 Jimsonweed 6 Knotweed 8 Kochia* 8 Cont’d next page

9

Broadleaf Weeds Maximum Size (inches) Lambsquarters, common* 8 Mallow, common 3 Mallow, little 3 Marshelder 5 Morningglory, annual Ipomoea spp. 4 Mustard spp. 8 Nightshade, black 8 Nightshade, Eastern black 8 Nightshade, hairy 8 Pennycress, field NA Pepperweed, field NA Pepperweed, Virginia NA Pigweed, redroot 8 Pigweed, smooth 8 Pigweed, spiny 8 Radish, wild 3 Ragweed, common* 9 Ragweed, giant* 9 Rocket, London 4 Rocket, yellow 3 Shepherd’s purse 8 Sicklepod 3 Smartweed, ladysthumb 6 Smartweed, Pennsylvania 6 Spurge, prostrate 8 Spurge, spotted 8 Sunflower 8 Teaweed/Prickly sida 2 Velvetleaf 5 Waterhemp* 8

Grass Weeds Maximum Size (inches) Barley, volunteer 8 Barnyardgrass 6 Crabgrass, large 8 Crabgrass, smooth 8 Cupgrass, woolly 8 Foxtail, giant 8 Foxtail, green 8 Foxtail, yellow 8 Goosegrass 5 Johnsongrass, rhizome* 8 Johnsongrass, seedling* 8 Oats, volunteer 8 Panicum, browntop 8 Panicum, fall 8 Panicum, Texas 8 Red rice 4 Rye 8 Shattercane 8 Signalgrass, broadleaf 8

10

Broadleaf Weeds Maximum Size (inches) Sorghum, almum 4 Sprangletop 8 Wheat, volunteer 8 Wild oats 8

Sedges Maximum Size (inches) Nutsedge, purple 3** Nutsedge, yellow 3**

NA = Not Applicable *Populations of indicated weeds exist that are known to be resistant to ALS/AHAS-inhibiting and EPSPS-inhibiting herbicides and may not be effectively controlled with D Dog Fight herbicide. In fields where these populations exist, incorporate additional control methods for effective weed control and include additional approved herbicides with alternate modes of action or mechanical means. **Reduced competition

Rotational Crop Restrictions The following rotational crops may be planted after applying DDog Fight at the specified rate. Planting earlier than the specified interval may result in crop injury. NOTE: See EExceptions To Rotational Crop Restrictions following these guidelines.

Anytime Clearfield corn seed hybrids (resistant/tolerant to PPursuit® herbicide) Lima beans Peanuts Peas Southern peas Soybeans

Two Months after DDog Fight application Snap beans

Four Months after DDog Fight application Barley (select states; see EExceptions To Rotational Crop Restrictions) Rye (except in North Dakota and Minnesota north of highway 210) Wheat (3 3 Months after DDog Fight application east of I-35) Alfalfa Clearfield wheat Clover Edible beans (other than lima beans)

Eight and one-half Months after DDog Fight application Field corn Field corn grown for seed

Nine and one-half Months after DDog Fight application Barley (except in North Dakota) Tobacco

Twelve Months after DDog Fight application Clearfield canola varieties (tolerant to PPursuit)

Eighteen Months after DDog Fight application Barley (North Dakota; see EExceptions To Rotational Crop Restrictions)

11

Rye in North Dakota and Minnesota north of highway 210 Cotton Safflower Lettuce Sorghum Oats Sunflower Popcorn Sweet corn

Twenty-six Months after DDog Fight application Flax Potatoes

Forty Months after DDog Fight application All crops not listed elsewhere in the RRotational Crop Restrictions* *Following forty months after a DDog Fight application, and before planting any crop not listed elsewhere in the RRotational Crop Restrictions, a successful field bioassay must be completed.

The field bioassay consists of a test strip of the intended rotational crop planted across the previously treated field and grown to maturity.

The test strip should include low areas and knolls, and include variations in soil such as type and pH. If no crop injury is ev ident in the test strip, the intended rotational crop may be planted the following year.

Sugar beet production can be reduced when grown in soil conditions with a pH less than 6.5. If the field is limed to adjust pH prior to planting rotational crops not listed in the R Rotational Crop Restrictions, apply the lime at least 12 months prior to planting the rotational crop. Use of DDog Fight in accordance with label directions is expected to result in normal growth of rotational crops in most situations; however, va rious environmental and agronomic factors make it impossible to eliminate all risks associated with the use of this product and, ther efore, rotational crop injury is always possible.

Exceptions To Rotational Crop Restrictions Barley (Delaware, Indiana, Kentucky, Maryland, New Jersey, Ohio, Pennsylvania, and Virginia only) Barley may be planted 44 months following an DDog Fight application in these states.

Barley (North Dakota only)

Barley may be planted 118 months following an DDog Fight application in North Dakota.

Corn Inbred Lines Corn inbred seed lines may be planted the year following an application of D Dog Fight. Several seed companies have tested a wide range of inbreds for sensitivity to DDog Fight soil residues and have reported good crop safety. However, due to the proprietary nature of seed production, LOVELAND PRODUCTS, INC. has not been given access to the inbred data. Growers are directed to contact the seed company for information and recommendations regarding planting corn grown for seed in fields treated with D Dog Fight the previous year. Since growing conditions, environmental conditions and grower practices are beyond the control of LOVELAND PRODUCTS, INC., to the extent consistent with applicable law, AALL RISKS AND CONSEQUENCES ASSOCIATED WITH PLANTING SEED CORN INBREDS INTO FIELDS TREATED PREVIOUSLY WITH Dog Fight SHALL BE ASSUMED BY THE USER.

Sweet Corn And Popcorn Varieties (Illinois, Indiana, Iowa, Minnesota, Ohio, Tennessee, and Wisconsin only) Sweet corn and popcorn varieties may be planted the year following an application of DDog Fight. Some sweet corn and popcorn varieties may be injured when planted at less than 18 months following an application of DDog Fight. Before planting sweet corn for processing, contact the processor company for information and guidance regarding the tolerance of sweet corn varieties planned for fields treated with DDog Fight the previous year. DO NOT plant fresh market sweet corn varieties prior to 18 months after DDog Fight use. Before planting popcorn, contact the popcorn company for information and guidance regarding the tolerance of popcorn varieties planned for fields treated with DDog Fight the previous year.

Since growing conditions, environmental conditions and grower practices are beyond the control of LOVELAND PRODUCTS, INC., to t he extent consistent with applicable law, A ALL RISKS AND CONSEQUENCES ASSOCIATED WITH PLANTING SWEET CORN OR POPCORN VARIETIES INTO FIELDS TREATED PREVIOUSLY WITH Dog Fight SHALL BE ASSUMED BY THE USER.

12

Stunting and maturity delay or other adverse effects may result when sweet corn or popcorn are planted following DDog Fight use.

Select Crops (Alabama, Delaware, Florida, Georgia, Kentucky, Indiana, Maryland, New Jersey, North Carolina, Pennsylvania, South Carolina, and Virginia only) The following crops may be planted 18 months following the last application of DDog Fight: Bahiagrass, cabbage, cantaloupe, cucumber, Irish potato, onion, sweet pepper transplants, sweet potato transplants, tomato transplants, and watermelon.

Wheat Wheat may be planted 3 months following an DDog Fight application in areas east of Interstate Highway I-35.

Non-Clearfield Wheat in North Dakota Rotational Interval based on pH, Moisture and Tillage pH and Rainfall Requirements Moldboard Plowing Rotational Interval (months) 10 inches R+I AND pH >6.2 No 4 Yes 4 <10 inches R+I OR pH <6.2 No 15 Yes 4 R+I = Rainfall and overhead irrigation from the time of DDog Fight application up until time of wheat planting. DDoes not include furrow or flood irrigation.

If the rainfall or pH requirements are not fully met, and non-C Clearfield wheat is planted prior to the specified rotation interval, injury may be reduced by tillage, such as deep disking (greater than 6 inches deep) after crop harvest but prior to November 1.

The possibility of injury to non-C Clearfield wheat planted the next season increases iif less than normal precipitation occurs within the first two months after Dog Fight application.

Uses With Other Products (Tank Mixes) To the extent consistent with applicable law, if this product is used in combination with any other product except as specifically recommended in writing by LOVELAND PRODUCTS, INC., then to the extent consistent with applicable law, LOVELAND PRODUCTS, INC. shall have no liability for any loss, damage or injury arising out of its use in any such combination not so specifically recommended. If used in combination recommended by LOVELAND PRODUCTS, INC., to the extent consistent with applicable law, the liability of LOVELAND PRODUCTS, INC. shall in no manner extend to any damage, loss or injury not directly caused by the inclusion of the LOVELAND PRODUCTS, INC. product in such combination use, and in any event shall be limi ted to return of the amount of the purchase price of the LOVELAND PRODUCTS, INC. product.

STORAGE AND DISPOSAL Do not contaminate water, food, feed or seed by storage or disposal. PESTICIDE STORAGE: This product is stable under conditions of freezing and thawing. Shake well before using. Keep containers closed to avoid spil ls and contamination. PESTICIDE DISPOSAL: Wastes resulting from the use of this product that cannot be used or chemically reprocessed must be disposed of in a landfill approved for pesticide disposal or in accordance with applicable Federal, state, or local procedures. Emptied container retains vapor and product residue. Observe all labeled safeguards until container is cleansed, reconditioned, or destroyed. CONTAINER HANDLING: Nonrefillable container: Do not reuse this container to hold materials other than pesticides or dilute pesticides (rinsate). After emptying and cleaning, it may be allowable to temporarily hold rinsate or other pesticide-related materials in the container. C ontact your state regulatory agency to determine allowable practices in your state. Once cleaned, some agricultural plastic pesticide containers can be take n to a container collection site or picked up for recycling. To find the nearest site, contact your chemical dealer or manufacturer, or contact The Agricul tural Container Recycling Council (ACRC) at www.acrecycle.org. Triple rinse or pressure rinse container (or equivalent) promptly after emptying. For packages up to 5 gallons: TTriple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into applic ation equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. PPressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begin s to drip. Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. For packages greater than 5 gallons and less than 56 gallons: Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container 1/4 full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one Cont’d next page

13

Storage and Disposal cont’d: complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Repeat this procedure two more times. Pressure rinse as follows: Empty t he remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside d own over application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container , and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. For packages greater than 56 gallons: To clean the container before final disposal, empty the remaining contents from this container into application equipment or mix tank. Fill the container about 10 percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times. For refillable containers: Refill this container with pesticide only. Do not reuse this container for any other purpose. Cleaning the container before fi nal disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the responsibility of the refiller. To clean the container before final disposal, empty the remaining contents from this container into application equipment or mix tank. Fill the contai ner about 10 percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times. For help with any spill, leak, fire or exposure involving this material, call day or night CHEMTREC - 1-800-424-9300.

CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY BEFORE BUYING OR USING THIS PRODUCT, read the entire Directions for Use and the following Conditions of Sale and Limitation of Warranty and Liability. By buying or using this product, the buyer or user accepts the following Conditions of Sale and Limitation of Warran ty and Liability, which no employee or agent of LOVELAND PRODUCTS, INC. or the seller is authorized to vary in any way.

Follow the Directions for Use of this product carefully. It is impossible to eliminate all risks inherently associated with the use of this product. Crop or other plant injury, ineffectiveness, or other unintended consequences may result from such risks as weather or crop conditions, mixtu re with other chemicals not specifically identified in this product’s label, or use of this product contrary to the label instructions, all of which are be yond the control of LOVELAND PRODUCTS, INC. and the seller. The buyer or user of this product assumes all such inherent risks.

Subject to the foregoing inherent risks, LOVELAND PRODUCTS, INC. warrants that this product conforms to the chemical descriptio n on the label and is reasonably fit for the purposes stated in the Directions for Use when the product is used in strict accordance with such Direct ions for Use under normal conditions of use. EXCEPT AS WARRANTED IN THIS LABEL AND TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THIS PRODUCT IS SOLD “AS IS,” AND LOVELAND PRODUCTS, INC. MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ELIGIBILITY OF THIS PRODUCT FOR ANY PARTICULAR TRADE USAGE. IN THE UNLIKELY EVENT THAT BUYER OR USER BELIEVES THAT LOVELAND PRODUCTS, INC. HAS BREACHED A WARRANTY CONTAINED IN THIS LABEL AND TO THE EXTENT REQUIRED BY APPLICABLE LAW, BUYER OR USER MUST SEND WRITTEN NOTICE OF ITS CLAIM TO THE FOLLOWING ADDRESS: LOVELAND PRODUCTS, INC., ATTENTION: LAW DEPARTMENT, P.O. BOX 1286, GREELEY, CO 80632-1286.

TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE BUYER’S OR USER’S EXCLUSIVE REMEDY FOR ANY INJURY, LOSS, OR DAMAGE RESULTING FROM THE HANDLING OR USE OF THIS PRODUCT, INCLUDING BUT NOT LIMITED TO CLAIMS OF BREACH OF WARRANTY OR CONTRACT, NEGLIGENCE, STRICT LIABILITY, OR OTHER TORTS, SHALL BE LIMITED TO ONE OF THE FOLLOWING, AT THE ELECTION OF LOVELAND PRODUCTS, INC. OR THE SELLER: DIRECT DAMAGES NOT EXCEEDING THE PURCHASE PRICE OF THE PRODUCT OR REPLACEMENT OF THE PRODUCT. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, LOVELAND PRODUCTS, INC. AND THE SELLER SHALL NOT BE LIABLE TO THE BUYER OR USER OF THIS PRODUCT FOR ANY CONSEQUENTIAL, SPECIAL, OR INDIRECT DAMAGES, OR DAMAGES IN THE NATURE OF A PENALTY.

Clearfield, Lightning, Prowl, Pursuit, and Sharpen are registered trademarks of BASF Verdict is a trademark of BASF Counter is a registered trademark of Amvac Chemical Corporation Roundup Ready is a registered trademark of Monsanto Technology LLC Dog Fight is a trademark of Loveland Products, Inc.

FORMULATED FOR LOVELAND PRODUCTS, INC. P.O. BOX 1286, GREELEY, COLORADO 80632-1286