crop-chem-docs/corpus/epa_ppls/34704-790.md

# TRIFLURALIN 10G

- EPA Reg No: **34704-790**
- Registrant: LOVELAND PRODUCTS, INC.
- Signal word: Caution
- Active ingredients: Trifluralin (10%)
- Label accepted: 2015-11-05
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/034704-00790-20151105.pdf

---
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY 
 WASHINGTON, DC 20460 
 
 
 
Notification Label Acceptable v.20150904 
OFFICE OF CHEMICAL SAFETY 
AND POLLUTION PREVENTION 
 November 5, 2015 
 
Chris Mason, Ph.D. 
Manager of Registrations 
Loveland Products, Inc. 
P.O. Box 1286 
Greeley, CO 80632-1286 
 
Subject: Notification per PRN 98-10 – Updating Directions for First Aid Information 
 Product Name: Trifluralin 10G 
 EPA Registration Number: 34704-790 
 Application Date: August 11, 2015 
 Decision Number: 508408 
 
Dear Dr. Mason: 
 
The Agency is in receipt of your Application for Pesticide Notification under Pesticide Registration 
Notice (PRN) 98-10 for the above referenced product. The Registration Division (RD) has conducted a 
review of this request for its applicability under PRN 98-10 and finds that the action requested falls within 
the scope of PRN 98-10. The label submitted with the application has been stamped “Notification” and 
will be placed in our records. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please be aware 
that the website becomes labeling under the Federal Insecticide Fungicide and Rodenticide Act and is 
subject to review by the Agency. If the website is false or misleading, the product would be misbranded 
and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) list examples of 
statements EPA may consider false or misleading. In addition, regardless of whether a website is 
referenced on your product’s label, claims made on the website may not substantially differ from those 
claims approved through the registration process. Therefore, should the Agency find or if it is brought to 
our attention that a website contains false or misleading statements or claims substantially differing from 
the EPA approved registration, the website will be referred to the EPA’s Office of Enforcement and 
Compliance. 
 
If you have any questions regarding this letter, please feel free to contact Terri Stowe at (703) 305-6117 
or via e-mail at stowe.terri@epa.gov. 
 
 S i n c e r e l y , 
 
 
Kathryn V. Montague 
Product Manager 23 
Herbicide Branch 
Registration Division (7505P) 
Office of Pesticide Programs

A Selective Herbicide for the Preemergence control of
Annual Grasses and Broadleaf Weeds
ACTIVE INGREDIENT:
 Trifluralin : a,a,a-trifluro-2,6-dinitro-
 N,N-dipropyl-P-toluidine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.0%
OTHER INGREDIENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90.0%
 TOTAL 100.0%
Contain 5 pounds active ingredient per 50 lb bag.
KEEP OUT OF REACH OF CHILDREN
CAUTION
FIRST AID
If in eyes: • Hold eye open and rinse slowly and gently with water for 15 –20 
 minutes.
 • Remove contact lenses, if present, after the first 5 minutes, then 
 continue rinsing eye.
 • Call a poison control center or doctor for treatment advice. 
If swallowed: • Call a poison control center or doctor immediately for treatment 
 advice.
 • Have a person sip a glass of water if able to swallow.
 • Do not induce vomiting unless told to do so by the poison control 
 center or doctor.
 • Do not give anything by mouth to an unconscious person.
If Inhaled: • Move person to fresh air.
 • If person is not breathing, call 911 or an ambulance, then give 
 artificial respiration, preferably by mouth-to-mouth, if possible.
 • Call a poison control center or doctor for further treatment advice.
If on skin • Take off contaminated clothing.
or clothing: • Rinse skin immediately with plenty of water for 15-20 minutes.
 • Call a poison control center or doctor for treatment advice.
FOR A MEDICAL EMERGENCY INVOLVING THIS PRODUCT CALL: 
1-866-944-8565.
Have the product container or label with you when calling a poison control center 
or doctor, or going for treatment.
For Additional Precautionary Statements, Complete First 
Aid, Directions for Use, Storage and Disposal and Other 
Use Information See Inside This Label Booklet.
EPA REG. NO. 34704-790
EPA EST. NO. _________
NET WEIGHT _________POUNDS
 061306 V6D 08Y15
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION
Causes eye irritation. Harmful if swallowed, inhaled or absorbed through the skin. 
Avoid breathing dust and contact with skin, eyes or clothing. This product may 
cause skin sensitization reactions in some people.
Personal Protective Equipment:
Some materials that are chemical-resistant to this product are listed below. If you 
want more options, follow the instructions for category F, on the EPA chemical 
resistance category selection chart. Applicators and other handlers must wear: 
long-sleeved shirt and long pants, chemical-resistant gloves, such as barrier 
laminate, butyl rubber > 14 mls, nitrile rubber > 14 mls, or viton > 14 mls, shoes 
plus socks. Follow manufacturer’s instructions for cleaning/maintaining PPE. If no 
such instructions for washable, use detergent and hot water. Keep and wash PPE 
separately from other laundry.
Engineering Controls Statements:
When handlers use closed systems, enclosed cabs, or aircraft in a manner that 
meets the requirements listed in the Worker Protection Standard (WPS) for agri-
cultural pesticides [40 CFR 170.240 (d)(4-6)], the handler PPE requirements may 
be reduced or modified as specified in the WPS.
USE SAFETY RECOMMENDATIONS
Users should:
Wash hands before eating, drinking, chewing gum, using tobacco, or using 
 the toilet.
Remove clothing immediately if pesticide gets inside. Then wash thoroughly 
 and put on clean clothing.
Remove PPE immediately after handling this product. Wash the outside of 
 gloves before removing. As soon as possible, wash thoroughly and change 
 into clean clothing.
ENVIRONMENTAL HAZARDS
This pesticide is extremely toxic to freshwater marine, and estuarine fish and 
aquatic invertebrates including shrimp and oyster. Do not apply directly to water, 
or to areas where surface water is present or to intertidal areas below the mean 
high water mark. Do not apply in a manner which will directly expose canals, lakes, 
streams, ponds, marshes or estuaries to aerial drift. Do not contaminate water 
when disposing of equipment washwaters.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its 
labeling.
Do not apply this product in a way that will contact workers or other persons, 
either directly or though drift. Only protected handlers may be in the area during 
application. For any requirements specific to your state or tribe, consult the agency 
responsible for pesticide regulation.
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker 
Protection Standard, 40 CFR part 170. This Standard contains requirements 
for the protection of agricultural workers on farms, forests, nurseries, and 
greenhouses, and handlers of agricultural pesticides. It contains requirement 
for training, decontamination, notification, and emergency assistance. It also 
contains specific instructions and exceptions pertaining to the statement on this 
label about personal protective equipment (PPE), and restricted-entry interval. 
The requirements in this box only apply to uses of this product that are covered 
by the Worker Protection Standard. Do not enter or allow worker entry into 
treated areas during the restricted entry interval (REI) of 12 hours. Exception: 
if the product is soil-injected or soil incorporated, the Worker Protection 
Standard, under certain circumstances , allows worker to enter the treated area 
if there will be no contact with anything that has been treated. PPE required 
for early entry to treated areas that is permitted under the Worker Protection 
Standard and that involves contact with anything that has been treated, such 
as plants, soils, or water, is: coveralls, chemical-resistant gloves, such as bar-
rier laminate, butyl rubber > 14 mls, nitrile rubber > 14 mls, or viton >14 mls, 
shoes plus socks.
WEEDS AND GRASSES
CONTROLLED BY TRIFLURALIN 10G
 Grasses
Annual bluegrass Poa annua
Barnyardgrass Echinochloa sp.
 (Watergrass)
Bromegrass Bromus tectorum
 (Cheatgrass)
 (Downy brome)
TRIFLURALIN 10G
GROUP HERBICIDE3
34704-790
11/05/2015

TRIFLURALIN 10G
EPA REG. NO. 34704-790
Crabgrass Digitaria spp.
 (Large crabgrass)
 (Smooth crabgrass)
Foxtail Setaria spp.
 (Bristlegrass)
 (Giant foxtail)
 (Green foxtail)
 (Foxtail millet)
 (Pigeongrass)
 (Robust foxtail)
 (Yellow foxtail)
Johnsongrass (from seed) Sorghum halepense
Junglerice Echinochloa colonum
Ryegrass, annual Lolioum multiflorum
Sandbur Cenchrus incertus
 (Burgrass)
Signalgrass, broadleaf Brachiaria platyphylla
 (brachiaria)
Sprangletop Leptochloa filiformis
Stinkgrass Eragrostis cilianensis
 (Lovegrass)
Shattercane Sorghum bicolor
 (Wild cane)
Oat, wild* Avena fatua
Wooly cupgrass Eriochloa villosa
 Broadleaf Weeds
Carpetweed Mollugo verticillata
Chickweed, common Stellaria media
Goosefoot Chenopodium hybridum
Henbit Lamium amplexicaule
Knotweed Polygonum aviculare
Lambsquarters, common Chenopodium album
Pigweed Amaranthus spp.
 (Carelessweed)
 (Prostrate pigweed)
 (Redroot pigweed)
 (Rough pigweed)
 (Spiny pigweed)
Puncturevine (Western U.S. only) Tribulus terrestris
 (Caltrop)
 (Goathead)
Purslane, common Portulaca oleracea
Pusley, Florida Richardia scabara
 (Florida purslane)
 (Mexican clover)
 (pusley)
Stinging nettle Urtica dioica
 (Nettle)
*When applied as a preplant incorporated (PPI) treatment, Trifluralin 10G will 
provide partial control of wild oats. This claim is for all PPI uses except for fall 
application for spring seeded cereals at foxtail (pigeongrass) control rates.
GENERAL PRECAUTIONS
Applied according to directions and under normal growing conditions, Trifluralin 
10G will not harm the treated crop. Over-applications may result in crop injury or 
rotational crop damage from soil residue. Uneven application or improper incor-
poration can result in erratic weed control or crop injury. Seedling disease, cold 
weather, deep planting, excessive moisture, high salt concentration or drought 
may weaken crop seedlings and increase the possibility of damage. Under these 
conditions, delayed crop development or reduced yields may result. Avoid applying 
Trifluralin 10G to soils that are wet or are subject to prolonged periods of flooding 
as poor weed control may result.
Do not use this product on any crop grown in Pecos county or Reeves county, 
Texas or Montana.
In Arizona, California, Colorado, Idaho, Nevada, New Mexico, Oregon, Utah, 
Washington and Wyoming: To avoid crop injury, do not plant sugarbeets, red-
beets, spinach, proso millet, corn, sorghum (milo), oats, and annual or perennial 
grass crops or grass mixtures for 12 months after a spring application or 14 months 
after a fall application of Trifluralin 10G. If land has not been irrigated, these crops 
should not be planted for 18 months after a spring application or 20 months after a 
fall application. The possibility of injury to these crops can be reduced with mold-
board plowing to a depth of 12 inches before planting.
All Other Areas: Sugarbeets, redbeets, and spinach should not be planted for 12 
months after a spring application or 14 months after a fall application. Moldboard 
plow to a depth of 12 inches before planing sugarbeets to reduce the possibility 
of crop injury.
In Minnesota, North Dakota and South Dakota: Proso millet, sorghum (milo), 
oats and annual or perennials grass crops or grass mixtures should not be planted 
for 18 months after a spring application or 21 months after a fall application of 
Trifluralin 10G.
In Portions of Kansas, Nebraska, Oklahoma, and Texas receiving less than 
20 inches of rainfall and irrigation: Do not plant proso millet, sorghum (milo), 
oats and annual or perennial grass crops or grass mixtures for 18 months after an 
application of Trifluralin 10G. The possibility of crop injury may increase in sorghum 
with cool wet weather conditions during early growth stages. Crops should not be 
planted for 12 months after a spring application or 14 months after a fall application 
of Trifluralin 10G in areas receiving more than 20 inches of rainfall or irrigation.
VEGETABLE CROPS
Vegetable crops other than those listed on this label for use with preplant soil 
incorporated application of Trifluralin 10G should not be planted within 5 months 
after an application of Trifluralin 10G.
APPLICATION DIRECTIONS
Application
Apply Trifluralin 10G with ground or aerial broadcast applicator properly calibrated 
to apply the granules uniformly. Apply at the recommended rate for soil texture to 
be treated. Follow calibration directions provided by the equipment manufacture. 
Avoid concentration of material in narrow bands.
Freezing will not adversely affect this product. If product is frozen at time of appli-
cation, agitate or thaw to restore free- flowing granules.
Soil Preparation
Trifluralin 10G may be applied to standing stubble or soil that has been pretilled. 
The soil surface should be smooth enough to allow for uniform application and 
efficient incorporation. Existing weeds and crop residues should be reduced to a 
manageable level using tillage so that this product can be uniformly incorporated 
into the top 2 or 3 inches of the final seed bed. Soil surface conditions and soil 
moisture should be sufficient to allow breakup of large clods and uniform mixing of 
Trifluralin 10G into the top 2 or 3 inches of soil. If this is not possible the soil should 
be tilled prior to application. Soil compaction and/or nonuniform incorporation may 
occur where soil is excessively moist.
Soil Texture
Trifluralin 10G rate recommendations for incorporated treatments are based on soil 
texture and organic matter content. A fine texture soil will require a higher applica-
tion rate than a coarse textured soil. Choose the proper rate for each application 
based on the soil texture. Refer to the table below to determine your soil texture.
 Soil Texture Soil Content
 Coarse (Light) Soils Sand, loamy sand, sandy loam
 Medium Soils Loam, silty clay loam*, silt loam, silt, 
 sandy clay loam*
 Fine (Heavy) Soils Clay, clay loam, silty clay loam*,
 silty clay, sandy clay, sandy clay loam*
*Silty clay loam and sandy clay loam soils are transitional soils that may be clas-
sified as either medium or fine textured soils. If silty clay loam or sandy clay loam 
soils are predominantly sand or silt, they are usually classified as medium textured 
soils. If they are predominantly clay, they are usually classified as fine textured 
soils.
Drift Advisory
Avoiding drift at the application site is the responsibility of the applicator. The inter-
action of many equipment- and weather-related factors determines the potential for 
drift. The applicator and the grower are responsible for considering all these factors 
when making decisions.
This pesticide should only be applied when the potential for drift to adjacent sensi-
tive areas (e.g. residential areas, bodies of water, known habitat for threatened or 
endangered species, non-target crops) is minimal (e.g. when wind is blowing away 
from the sensitive areas).
APPLICATION TIMING
Spring Application
Apply Trifluralin 10G any time after January 1 when soil can be worked and is 
suitable condition for good incorporation. See Approved Crops section for recom-
mendations on specific crops.
Fall Application
In California, Minnesota, North Dakota and South Dakota, apply Trifluralin 10G any 
time between September 1 and December 31. In all other states, fall apply anytime 
between October 15 and December 31. Refer to the Approved Crops section of 
this label for specific rate recommendations. Increased rates for fall application are 
recommended for certain crops growing in certain geographic areas. For crops for 
which there are no specific fall application instructions, and for which Trifluralin 
10G is recommend as a preplant incorporated treatment, use other rates listed for 
spring applications. In areas receiving greater than 20” total average annual rainfall 
2

TRIFLURALIN 10G
EPA REG. NO. 34704-790
and irrigation, use the higher rate in the recommend rate range. Do not fall apply 
Trifluralin 10G prior to planting sugar beets, potatoes and direct seeded tomatoes 
the following spring. Ground may be left flat or bedded- up over winter. On bedded 
ground, knock beds down to desired height before planting, moving some treated 
soil from beds into furrow. Where soil is left flat over winter, be careful not to turn up 
untreated soil during spring bedding operations. Destroy established weeds during 
seed bed preparation. Prior to planting, destroy any weeds which have become 
established in furrow due to uncovering of untreated soil. Do not apply this product 
in the fall to soils that are wet or subject to prolonged periods of flooding, or where 
rice was grown the previous year.
INCORPORATIONS DIRECTIONS
Incorporation Before Planting
Trifluralin 10G must be incorporated the first time within 24 hours after application. 
A second incorporation is required for best results and should be made 3-5 days 
of the first and be completed prior to planting. A minimum delay of 7 days after the 
first incorporation is recommended for certain uses in small grains. Incorporation 
should place the Trifluralin 10G into the top 2 to 3 inches of the final seedbed 
or erratic weed control and/or crop injury may result. Generally, incorporation 
equipment will place the chemical approximately half as deep as the equipment 
is run. For example, a disc running 4 inches deep will incorporate Trifluralin 10G 
approximately 2 inches deep.
Incorporation in Established Crops
Check crop list for those crops approved for incorporation in certain established 
crops.
Incorporation in Bedded Culture
For effective weed control, Trifluralin 10G should be incorporated into the top 2 to 
3 inches of the final seedbed.
 Application prior to Bedding
 Apply and make first incorporation with recommended equipment. The bed- 
 ding operation serves as the second incorporation. Do not expose untreated
 soil during post-bedding operations*.
 Application after Bedding
 Knock off beds to planting height before applying. Apply Trifluralin 10G and 
 incorporate with recommended equipment that will conform to the bed shape.
 Do not leave the untreated soil exposed*.
 *Avoid removal of treated soil from the seed bed before or during the plant-
 ing operation. Exposure of untreated soil, will allow weeds to germinate in the
 drill row.
Incorporation Equipment
Any recommended incorporation implement may be used alone or in combination 
with any other recommended implement. Two incorporation passes are necessary 
unless otherwise specified. The second incorporation should not be deeper than 
the first.
 Disc: Set to cut 4 to 6 inches deep and operate at 4 to 6 mph.
 Field Cultivator: Set equipment to cut 3 to 4 inches deep and operate at 5 
 or more mph. A field cultivator is an implement with 3 to 4 row of sweeps, 
 spaced at intervals of 7 inches or less and staggered so that no soil is left 
 unturned. Chisel points should not be used.
 Chisel Plow (for use in Northern Great Plains): The chisel plow may be 
 used for the first incorporation pass only. Any other recommended incorpor- 
 ation implement may be used for the second pass for row crops. The chisel 
 plow maybe used for any tillage or incorporation pass in the Summer Fallow
 program. Operate chisel plow 4 to 5 inches deep at 4 to 6 mph.
 Combination Seedbed Conditioners: Combination implements should be 
 set to cut 3 to 4 inches deep and operate at a speed of at least 6 mph. These
 implements are devined as three or more tillage devices combined and 
 used as a single tool. For example, 2 to 3 rows of field cultivator c- or s-
 shaped shanks with an effective sweep spacing of 6 to 9 inches (staggered
 so that no soil is left unturned), followed by a spike-tooth or flextine harrow, 
 followed by a ground-driven reel or basket.
 Rolling Cultivator: Set to cut 2 to 4 inches deep and operate at 6 to 8 mph.
 Rolling cultivators are adequate for use on coarse and medium textured 
 soils only.
 Mulch Treader (other similar disc-type implements): Set to cut 3 to 4 
 inches deep and operate at 5 to 8 mph.
 
 P.T.O Driven Equipment (tillers, cultivators, hoes): Adjust to incorporate 
 Trifluralin 10G into the top 2 to 3 inches of the seedbed with rators spaced 
 to provide a clean sweep of the soil. Only one incorporation is necessary. 
 P.T.O. driven equipment should be operated at a speed greater than 4 mph.
 Other Equipment: Other implements including a flexible tine-tooth harrow 
 (Flextine or Melroe), sweep-type cultivator or rolling cultivator are 
 recommended, but only for certain uses defined in the Approved Crops 
 section of this label.
Cultivation after Planting
Treated soil may be shallowly cultivated without loss of weed control activity. Avoid 
deep cultivation since this could bring untreated soil to the soil surface and loss of 
weed control may result.
APPROVED CROPS
ALFALFA-ESTABLISHED
To control Barnyard grass, bromegrass (cheatgrass, downy brome) canarygrass, 
cheat (chess), crabgrass, wooly cupgrass, foxtail, junglerice, sandbur, and wild 
barley, apply 20 lbs/acre of Trifluralin 10G to established alfalfa prior to weed 
emergence with ground or aerial equipment. Trifluralin 10G may be applied during 
dormancy or throughout the growing season immediately after a cutting. A single 
rainfall or overhead sprinkler irrigation of .5 inches or more, flood irrigation or furrow 
irrigation after application is required to activate Trifluralin 10G. If activated using 
furrow irrigation, the surface of beds between furrows should be thoroughly wetted. 
If activating does not occur within 3 days after application, Trifluralin 10G should 
be activated using incorporation equipment that will insure thorough soil mixing 
with minimum damage to the established alfalfa. Because Trifluralin 10G does not 
control established weeds, application must be made prior to the expected time of 
weed germination.
Fall Application
Trifluralin 10G controls bromegrass and cheat, in addition to other weeds listed 
above that germinate after application. Apply immediately after a cutting between 
August 1 and October 1.
Precaution: Where the alfalfa is to be rotated to another crop in the season fol-
lowing a 20 lbs/acre treatment, plant only crops for which Trifluralin 10G can be 
applied as preplant incorporated treatment or crop injury may result. Apply no more 
than 20 lbs. of product during any growing season. Do not cut or graze alfalfa within 
21 days after application of this product.
ASPARAGUS-ESTABLISHED
Apply Trifluralin 10G as single or split application in winter or early spring after 
mature ferns have been removed but before new spears begin to emerge in order 
to suppress volunteer seedling asparagus and field bindweed. Apply post-harvest 
applications immediately after harvest in late spring or early summer just before 
ferns are allowed to develop.
Broadcast Application Rate/Acre:
 Trifluralin 10G
 Split Application Before Single Application Before 
 Soil Texture and After Harvest or After Harvest
 Coarse 5 lbs + 5 lbs. 10 lbs
 Medium 7.5 lbs + 7.5 lbs. 15 lbs
 Fine 10 lbs + 10 lbs. 20 lbs
*Do not apply more than 10 lbs/acre on coarse soils, 15 lbs/acre on medium soils 
or 20 lbs/acre on fine soils during the calendar year.
BEANS-GUAR AND MUNGBEAN
Apply and incorporate Trifluralin 10G before planting at a rate of 5 lbs on coarse 
soils and 7.5 lbs on medium and fine soils. Use 7.5 lbs on soils with 2-5% organic 
matter.
BEANS - LIMA BEAN AND SNAP BEAN
Apply and incorporate Trifluralin 10G before planting at a rate of 5 lbs. on coarse 
and medium soils, and 7.5 lbs. on fine soils. Use 7.5 lbs. on soils with 2-5% organic 
matter.
BEANS- DRY BEANS*
Apply and incorporate Trifluralin 10G in the spring before planting or in the fall. See 
instructions for “Fall Application’’ under “Application Timing’’
CARROTS*
Apply and soil incorporate Trifluralin 10G before planting.
CASTOR BEAN*
Apply and soil incorporate Trifluralin 10G before planting.
CELERY*
Apply and soil incorporate Trifluralin 10G to direct seeded or transplanted celery 
before planting, at planting or immediately after planting.
CUCURBITS - CANTALOUPE, CUCUMBER, AND WATERMELON*
Apply and incorporate Trifluralin 10G when plants have reached the 3 to 4 true leaf 
stage of growth. Set incorporation equipment to move treated soil around the base 
of plants during incorporation. Do not apply within 30 days of harvest, except for 
Watermelon which has a 60 day pre-harvest interval.
3

TRIFLURALIN 10G
EPA REG. NO. 34704-790
OKRA*
Apply and incorporate Trifluralin 10G before planting.
PEAS-SOUTHERN PEAS*
Apply and incorporate Trifluralin 10G before planting.
PEPPER (Transplant Only)*
Apply and incorporate Trifluralin 10G prior to transplanting. Do not apply after 
transplanting.
POTATOES*
Apply and incorporate Trifluralin 10G after planting prior to crop emergence, 
immediately following dragoff, or after potato plants have fully emerged. Set incor-
poration equipment so that the bed and furrow are uniformly covered with a layer 
of treated soil or potato emergence may be retarded and some brittleness can 
occur. If applying and incorporating Trifluralin 10G to potato plants that have fully 
emerged, do not completely cover the foliage with treated soil and do not cover 
foliage during subsequent cultivations. Be careful not to damage seed pieces or 
elongated sprouts with incorporation equipment.
*Refer to table directly below for rates.
Broadcast Application Rates/Acre:
 Soil Texture Trifluralin 10G
 Coarse 5 lbs
 Medium 6.25 - 7.5 lbs
 Fine 7.5 - 10 lbs.
*Use 7.5 lbs on coarse and medium soils with 2-5% organic matter; 10 lbs. on fine 
soils with 2-5% organic matter and all soils with 5-10% organic matter. In areas 
receiving less than 20 inches total annual rain fall and irrigation, use lower rate in 
rate range.
PEAS-DRY PEA AND ENGLISH PEAS
Apply and incorporate Trifluralin 10G in the spring before planting or in the fall. 
Refer to instructions for “Fall Application’’ under “Application Timing’’ in the 
“General Information’’ section of this label.
Broadcast Application Rate/Acre:
 Trifluralin 10G
 Soil Texture Spring Application Fall* Application
 Coarse 5 lbs 5 lbs. 
 Medium 5 lbs 6.25 - 7.5 lbs
 Fine 7.5 lbs 7.5 lbs
*Trifluralin 10G may be fall applied to Dry and English Peas in the states of Idaho, 
Oregon and Washington.
*Use the lower rate in areas receiving less than 20 inches total annual rainfall and 
irrigation.
CHICORY/ENDIVE
Trifluralin 10G may be applied as a preplant soil incorporated treatment in spring 
or early summer prior to planting to chicory grown either as a root crop or leafy 
vegetable as indicated below:
 Cichorium intybus, considered to be a root crop, may yield the following:
 Chicory-the dried and processed root used as a coffee substitute.
 Radicchio-green leaves harvested from field grown plantings.
 Belgian Endive-white leaves grown in the dark from field grown rootstalks.
 Cichorium endiva, considered to be a leafy vegetable, may yield the following:
 Escarole-curly green leaves from field grown plantings.
 Endive-very curly green leaves from field grown plantings.
Broadcast Application Rates per Acre:
 Soil Texture Trifluralin 10G
 Coarse 5 lbs
 Medium 7.5 lbs
 Fine 10 lbs
*Use 7.5 lbs. on coarse and medium soils with 2-5% organic matter; 10 lbs. on fine 
soils with 2-5% organic matter and all soils with 5-10% organic matter.
COLE CROPS-BROCCOLI, BRUSSELS SPROUTS,
CABBAGE AND CAULIFLOWER
Direct Seeded Cole Crops
Trifluralin 10G may be applied and incorporated before planting at a rate of 5 lbs 
for coarse and medium soils and 7.5 lbs on fine soils. Use 7.5 lbs on all soils with 
2-5% organic matter.
 Precaution: Direct seeded cole crops exhibit marginal tolerance to higher 
 than recommended rates of Trifluralin 10G. Stunting or reduced stands may 
 occur.
Transplanted Cole Crops
Apply and incorporate Trifluralin 10G before transplanting.
Broadcast Application Rates/Acre:
 Soil Texture Trifluralin 10G
 Coarse 5 lbs
 Medium 6.25 - 7.5 lbs
 Fine 7.5 - 10 lbs
*Use 7.5 lbs on coarse and medium soils with 2-5% organic matter and 10 lbs. 
on fine soils with 2-5% organic matter and all soils with 5-10% organic matter. In 
areas receiving less than 20 inches total annual rain fall and irrigation, use lower 
rate in rate range.
CORN-FIELD CORN ONLY
Uniformly apply Trifluralin 10G as a postemergence treatment following the use of 
preemergence herbicide to the soil surface when the crop is well established (2 true 
leaf stage or taller), or immediately after a cultivation, up to a height of 30 inches. 
Incorporation should take place within 24 hours after application with one pass of 
a sweep-type cultivator or properly adjusted rolling cultivator. Trifluralin 10G does 
not control established weeds.
Do not apply Trifluralin 10G within 6 weeks prior to harvesting forage, fodder or 
silage or after corn is 30 inches tall.
Precautions
Do not apply Trifluralin 10G to sweet corn, popcorn, or corn grown for seed. Also, 
do not apply as preplant or preemergence treatment or crop injury may occur.
Broadcast Application Rates/Acre:
 Soil Texture Trifluralin 10G
 Coarse 3.75-5* lbs
 Medium 5 - 7.5 lbs
 Fine 7.5 - 10 lbs
*When used in Alabama, Florida, Georgia, North Carolina, South Carolina and 
Virginia on coarse soils to control fall panicum and Texas panicum, use 5 to 7.5 
lbs/acre.
*Apply lower rate in rate range in areas receiving less than 20 inches total annual 
rainfall and irrigation.
COTTON
Trifluralin 10G may be applied and incorporated before or at planting, immediately 
after planting, at layby, or in the fall. When incorporating Trifluralin 10G after plant-
ing, be careful not to disturb the seed.
Broadcast Application Rate/Acre:
 Trifluralin 10G
 Spring* Fall Application
 Application
 Soil Texture Eastern U.S.** Western U.S.***
 Coarse 5 lbs 10 lbs 7.5 lbs
 Medium 6.25-7.5 lbs 10 lbs 10 lbs
 Fine 7.5-10 lbs 12.5 lbs 12.5 lbs
*Spring Application: Use 7.5 lbs on coarse and medium soils with 2-5% organic 
matter; 10 lbs on fine soils with 2-5% organic matter and all soils with 5-10% 
organic matter.
Use lower rate in rate range in areas receiving less than 20 inches total annual 
rain fall and irrigation.
**Fall Application: Use rates for eastern cotton producing areas including Alabama, 
Arkansas, northern Florida, Georgia, Louisiana, Mississippi, southeastern Missouri 
(Bootheel), North Carolina, New Mexico, Oklahoma, South Carolina, Tennessee 
and Texas.
***Fall Application: Use rates for western cotton producing areas including Arizona, 
California, and Nevada.
For cotton grown in areas other than those listed above, fall apply Trifluralin 10G at 
broadcast rates recommended for areas receiving greater than 20 inches of annual 
rainfall and irrigation.
Layby Treatment
Trifluralin 10G may be applied and incorporated any time up to layby, but not less 
than 90 days before harvest. Apply so that there is uniform distribution of granules 
on the soil surface beneath cotton plants. Use the same rates as for preplant incor-
porated treatments. Soil incorporate using one pass of a sweep-type cultivator or 
properly adjusted rolling cultivator.
Preemergence Overlay Applications Following Trifluralin 10G
Apply Trifluralin 10G as a preplant incorporated treatment. Overlay applications 
of products registered for use on cotton may control additional weeds tolerant to 
Trifluralin 10G. Such applications may be made unless use following a Trifluralin 
10G application is specifically prohibited by the product label. Refer to the overlay 
product label for additional weeds controlled, directions for use, cautions and 
limitations before use.
4

TRIFLURALIN 10G
EPA REG. NO. 34704-790
Postemergence Applications Following Trifluralin 10G
Apply Trifluralin 10G as a preplant incorporated treatment. The use of postemer-
gent applications of products registered for use on cotton may control additional 
weeds tolerant to Trifluralin 10G. Such treatments may be made unless use fol-
lowing a Trifluralin 10G application is specifically prohibited by the product label. 
Consult the postemergence product label for additional weeds controlled, direc-
tions for use, cautions and limitations before use.
FLAX (Fall Application Only)
Use Trifluralin 10G at a rate of 5 lbs/acre on coarse soils, 7.5 lbs/acre on medium 
soils, and 10 lbs/ acre on fine soils. Product should be applied and incorporated 
in the fall between September 1 to December 31 in California, Minnesota, North 
Dakota, and South Dakota and between October 15 and December 31 in all other 
states. Refer to instructions for “Fall Applications’’ under “Application Timing’’. 
Incorporation or other tillage performed in the spring prior to seeding should be 
relatively shallow in order to maintain a firm seedbed, which should be packed 
just prior to seeding. Seed into moist seedbed no more than 1.5 inches deep with 
a press or hoe drill. Flax should not be seeded until the seedbed has warmed up.
GRAIN SORGHUM (Milo)
Apply Trifluralin 10G uniformly to the soil surface when grain sorghum is 8 inches 
tall or taller. Apply as a postemergence treatment following the use of a preemer-
gence herbicide. Cultivate before application to move established weeds and cover 
the base of plants with soil. Set cultivation equipment to add approximately one 
inch of soil to the base of sorghum plants. Trifluralin 10G should be incorporated 
within 24 hours after application with one pass of a sweep-type cultivator or prop-
erly adjusted rolling cultivator.
Broadcast Application Rates/Acre:
 Soil Texture Trifluralin 10G
 Coarse 4 - 5 lbs
 Medium 5 - 7.5 lbs
 Fine 7.5 - 10 lbs
*In areas receiving less than 20 inches total annual rainfall and irrigation, lower rate 
in range should be applied.
GREENS-TURNIP GREENS GROWN FOR PROCESSING
(Collard, Kale, and Mustard Greens)
Apply product as a preplant incorporated treatment at a rate of 5 lbs/acre to coarse 
soils; 7.5 lbs/acre to medium and fine soils.
HOPS
Apply and incorporate Trifluralin 10G to established hops during dormancy at a 
rate of 5 lbs/acre for coarse soils, and 6.25 - 7.5 lbs/acre for medium and fine 
soils. Incorporate once using incorporation equipment that will insure thorough soil 
mixing with minimal damage to crop stand. Use 7.5 lbs/acre on coarse and medium 
soils with 2-5% organic matter.
MUSTARD
(Grown for seed or processing for food in Minnesota, North Dakota, 
and South Dakota)
Apply and incorporate Trifluralin 10G before planting at a rate of 5 lbs/acre for 
coarse soils, and 7.5 lbs/acre for medium and fine soils.
PEANUTS
Spanish Peanuts, Florunner and Florigiant Varieties (For Use in Texas, 
Oklahoma and New Mexico)
Apply and incorporate Trifluralin 10G before planting, at planting or immediately 
after planting at a rate of 5 lbs/acre on coarse soils and 7.5 lbs/acre on medium 
soils. When incorporating after planting, be careful not to disturb the seed.
RAPESEED (CANOLA)
Trifluralin 10G should be applied and incorporated in the spring or in the fall at a 
rate of 5 lbs/acre for coarse soils, 7.5 lbs/acre for medium soils, and 10 lbs/acre 
on fine soils. Refer to “Fall Application’’ under “Application Timing’’ instructions on 
this label.
SAFFLOWER
Trifluralin 10G should be applied in the spring before planting, or in the fall. See 
instruction for “Fall Applications’’ under “Application Timing’’ instruction on this 
label.
Broadcast Application Rate/Acre:
 Trifluralin 10G
 Soil Texture Spring* Application Fall** Application
 Coarse 5 lbs 7.5 lbs
 Medium 6.25 - 7.5 lbs 10 lbs
 Fine 7.5 - 10 lbs 12.5 lbs
*Spring Application: Use 7.5 lbs on coarse and medium soils with 2-5% organic 
matter; 10 lbs on fine soils with 2-5% organic matter; and 10-12.5 lbs on all soils 
with 5-10% organic matter. Use lower rate in range in areas receiving less than 20 
inches total annual rain fall and irrigation.
**Trifluralin 10G may be fall applied to Safflower in Arizona, California, Idaho, 
Nevada, Oregon, Utah, Washington, and Wyoming.
SMALL GRAIN - BARLEY, DURUM AND WHEAT
General Information
Use any of the following implements listed below in the manner described for the 
first incorporation of Trifluralin 10G. Use only a disc or field cultivator for the second 
incorporation pass and incorporate in a different direction. Poor weed control may 
result if untreated soil is moved to the surface during the second incorporation 
pass. To avoid this problem, the second incorporation should not be deeper than 
the first.
Chisel Plow: May be used for the first incorporation pass only. It should be oper-
ated at 4 to 6 mph and 4 to 5 inches deep. Stagger sweeps so that no soil is left 
unturned.
Tandem Disc: Operate at 3 to 4 inches deep and at 4 to 6 mph.
Field Cultivator: Operate at 5 or more mph and at 3 to 4 inches deep. Stagger 
sweeps so that no soil is left unturned.
Precautions
Under certain conditions, delayed crop emergence and/or stand reduction may 
occur when Trifluralin 10G is applied to barley, durum, or wheat. The combined 
effect of certain cultural practices and unfavorable soil or environmental conditions 
may cause excessive crop seedling stress resulting in retarded crop growth, stand 
reduction and possibly reduced yield. For best result, observe the following prac-
tices and precautions:
• Provide a uniformly firm seedbed and time tillage operation to conserve moisture. 
Irrigate prior to planting or after germination and emergence.
• When planting seed, set drills to place seed at the depth specified in use direc-
tions. A planting depth greater than 2.5 inches for spring wheat or durum will result 
in increased seedling stress and decreased emergence.
• If seed treatments are used, apply at the correct rate and uniformly across all 
seeds.
• Do not fall apply Trifluralin 10G in combination with any other preplant incorpo-
rated herbicide.
• High salinity, eroded knolls/hilltops, loose dry soils and compaction may contrib-
ute to seedling stress.
• Cold and/or wet soils, excessively hot soils, excessive moisture, drought, and soil 
crusting from heavy rainfall may also contribute to crop seedling stress.
Barley, Spring Seeded—Fall Applications (For Use in Minnesota, North 
Dakota and South Dakota)
Apply in the fall for general weed control during the following growing season. 
Incorporate once within 24 hours and a second time before planting to destroy 
existing weeds and insure uniform distribution of Trifluralin 10G in soil. The second 
incorporation should occur at least 7 days after the first. Set planting equipment to 
place seed approximately 2 inches deep.
Note: See recommendation on incorporation and equipment in the beginning of 
this section.
Broadcast Application Rate/Acre:
 Soil Texture Trifluralin 10G
 Coarse 5 lbs
 Medium 7.5 lbs
 Fine 7.5 lbs
When applied at 7.5 lbs/acre, Trifluralin 10G will provide partial control or suppres-
sion of kochia and Russian thistle.
Barley, Spring Seeded—Spring Application for Use In Barley Used as a 
Cover Crop or in the Acreage Conservation Reserve Program (For use in 
Minnesota, North Dakota, and South Dakota)
For control of foxtail (pigeongrass), apply Trifluralin 10G in the spring as a preplant 
incorporated treatment. Incorporate one time within 24 hours and a second time 
before planting to destroy existing weeds and insure uniform distribution of this 
product in soil. The second incorporation should be completed at least 7 days after 
the first. Set planting equipment to lace seed approximately 2 inches deep.
See recommendations on incorporation and equipment at the beginning of this section.
Broadcast Application Rates/Acre:
 Soil Texture Trifluralin 10G
 Coarse 5 lbs
 Medium 7.5 lbs
 Fine 7.5 lbs
*Use of this practice may result in a slight stand reduction. Follow the most severe 
grazing restrictions imposed by either this label or the USDA Acreage Conservation 
Reserve Program, whichever is longest. Consult the local ASCS office or state 
agency to determine the restriction period.
5

TRIFLURALIN 10G
EPA REG. NO. 34704-790
Spring Seeded Wheat or Durum—Fall Application
Apply this product in the fall for foxtail (pigeongrass) control during the following 
growing season. Incorporate one time within 24 hours, and a second time before 
planting to destroy existing weeds and insure a uniform distribution of Trifluralin 
10G in soil. Set planting equipment to place seed approximate 2 inches deep. See 
recommendation on incorporation and equipment at the beginning of this section.
Broadcast Application Rate/Acre:
 Soil Texture Trifluralin 10G
 Coarse 5 lbs
 Medium 5 lbs
 Fine 7.5 lbs
Winter Wheat—Preplant Incorporated (For Use in Idaho, Oregon, and 
Washington)*
For control of cheatgrass and other annual grasses, apply Trifluralin 10G as a pre-
plant incorporated treatment up to 3 weeks before planting. See recommendations 
on incorporation direction below.
Winter Wheat—Fallow Soil Application (For Use in Idaho, Oregon, 
Washington)*
For control of cheatgrass and certain other annual grasses and broadleaf weed 
during the fallow period and during the following growing season, apply and shal-
lowly incorporate Trifluralin 10G up to 4 months before planting.
*See following table for rates and instructions.
Broadcast Application Rate/Acre:
 Soil Texture Trifluralin 10G
 Coarse 7.5 lbs
 Medium 7.5 lbs
 Fine 10 lbs
Incorporation Directions for Preplant and Fallow Soil Application
Incorporate with a flexible tine-toothharrow (flextine or Melroe), set to cut 1 to 2 
inches deep and operated at 3 to 6 mph. Thorough incorporation requires 2 incor-
poration passes over the field in different directions. Incorporate 1 time within 24 
hours of application. A required second incorporation pass prior to planting should 
occur at least 5 days after the first. Do not till the soil with a disc after this product 
has been incorporated with a flexible tine harrow.
Planting Directions for Preplant and Fallow Soil Application
Use only deep furrow or semi-deep furrow drill that will place the seed below the 
zone into which Trifluralin 10G has been incorporated.
Precaution: Do not plant wheat directly into the zone of soil treated with Trifluralin 
10G as crop injury may occur.
Summer Fallow Weed Control Followed Spring Seeded Wheat, Durum, or 
Barley
Trifluralin 10G may be applied for control of labeled weeds in the summer fallow 
period and for pigeongrass (foxtail) control in wheat, durum, and barley seeded the 
following spring. Apply this product to standing stubble or land which has been fal-
lowed or pretilled. Existing weeds and surface debris should be reduced by tillage 
if the exist in quantities that will prevent uniform soil incorporation. The first incor-
poration is required within 24 hours after application, and the second may occur in 
conjunction with tillage to destroy resistant weed growth during the remainder of 
the fallow year. During the fallow year, susceptible weeds may not be controlled 
until after the second incorporation. See recommendations on incorporation and 
incorporation equipment at the beginning of this section. Wheat, durum, or barley 
should be seeded approximately 2 inches deep.
Broadcast Application Rates/Acre:
 Trifluralin 10G
 Application Date 
 Areas with less than All other areas
 10 inches annual rainfall
 April 15 - April 30 8.75 lbs 10 lbs
 May 1 - May 31 8.75 - 7.5 lbs 10 lbs - 8.75 lbs
 June 1 - June 30 7.5 - 6.25 lbs 8.75 - 7.5 lbs
 July 1 - July 31 6.25 - 5 lbs 7.5 - 6.25 lbs
 August 1 - August 31 5 lbs 6.25 - 5 lbs
*Where rate range is shown, use the higher rate per acre during the early part 
of an application period and the lower rate per acre during the latter part of an 
application period.
SOYBEANS
Apply and incorporate Trifluralin 10G in the spring prior to planting or in the fall. See 
instructions for “Fall Application’’ under “Application Timing’’. 
Broadcast Application Rates/Acre:
 Soil Texture Trifluralin 10G 
 Spring * Application Fall** Application
 Coarse 5 lbs 10 lbs
 Medium 7.5 lbs 10 lbs
 Fine 10 lbs 12.5 lbs
* Spring Application: Use 7.5 lbs on coarse and medium soils with 2 - 5% organic 
matter; 10 lbs on fine soils with 2 - 5% organic matter; and 10-12.5 lbs on all soils 
with 5 - 10% organic matter.
**Fall Application: Use rates for soybeans grown in Alabama, Arkansas, Northern 
Florida, Georgia, Louisiana, Mississippi, southeastern Missouri (Bootheel), North 
Carolina, Oklahoma, South Carolina, Tennessee, and Texas. For soybeans grown 
in areas other than those listed above, fall apply Trifluralin 10G at broadcast rates 
recommended for areas receiving greater than 20 inches of annual rainfall and 
irrigation.
Precaution: Do not fall apply Trifluralin 10G in the fall to soils which are wet or sub-
ject to prolonged periods of flooding, or where rice was grown the previous year.
Preemergence Overlay Applications Following Trifluralin 10G
Apply Trifluralin 10G as a preplant incorporated treatment. Additional weeds toler-
ant to Trifluralin 10G may be controlled using preemergence overlay applications 
of other products registered of use on soybeans. Such treatments may be made 
unless use following a Trifluralin 10G application is specifically prohibited by the 
product label. Consult the overlay product label for additional weeds controlled, 
directions for use, and cautions before use.
Postemergence Treatments Following Trifluralin 10G
Apply Trifluralin 10G as a preplant incorporated treatment. Additional weeds toler-
ant to Trifluralin 10G may be controlled using postemergence applications of other 
products registered for use on soybeans. Such treatments may be made, unless 
use following Trifluralin 10G application is specifically prohibited by the product 
label. Consult the overlay or postemergence product label for additional weeds 
controlled, directions for use, caution, and limitations before use.
SUGAR BEETS 
Apply and incorporate Trifluralin 10G when sugar beets are 2 to 6 inches tall.
Precaution: To reduce the possibility of girdling, exposed sugarbeet roots should 
be covered with soil before applying Trifluralin 10G. When incorporating, set equip-
ment to move treated soil into the row.
 Soil Texture Trifluralin 10G
 Coarse 5 lbs
 Medium 6.25 - 7.5 lbs
 Fine 6.25 - 7.5 lbs
Use lower rate in rate range in areas receiving less than 20 inches total annual 
rainfall and irrigation.
SUGARCANE
Apply and incorporate Trifluralin 10G twice a year at a rate of 10 - 20 lbs for all soil 
textures. Make the first application in the fall on firmly packed beds immediately 
after the seed pieces are planted and a second application in the spring before or 
shortly after the cane emerges. Loosen rain-packed beds 2 to 3 inches deep before 
spring application.
Applications Up to Layby for Plant Cane or Ratoon Cane (For Use in 
Louisiana and Texas) and Itchgrass Control (for Use in Louisiana)
Apply and incorporate this product at a rate of 10 - 20 lbs shortly before or after 
cane emergence until layby. For itchgrass control, apply and incorporate Trifluralin 
10G on plant or ratoon cane. Apply after beds have been shaved or false shaved. 
Loosen rain-packed beds 2 to 3 inches deep before application. Incorporate with 
a rolling cultivator or bed chopper for all soil textures. Set chopper to cut 3 to 4 
inches deep and operate at 4 to 6 mph. Two incorporation passes are necessary.
SUNFLOWERS*
Apply and incorporate Trifluralin 10G in the spring or in the fall between September 
15 and December 31 in California, Minnesota, North Dakota, and South Dakota, 
and between October 15 and December 31 in other states.
TOMATOES*
For direct seeded tomato, apply Trifluralin 10G at blocking or thinning to the soil 
between rows and beneath plants and incorporate. For transplant tomatoes, apply 
and incorporate prior to transplanting only. Do not apply this product after trans-
planting.
6

TRIFLURALIN 10G
EPA REG. NO. 34704-790
*Refer to the table below for application rates
Broadcast Application Rates/Acre:
 Soil Texture Trifluralin 10G
 Coarse 5 lbs
 Medium 6.25 - 7.5 lbs
 Fine 7.5 - 10 lbs
Use 7.5 lbs on coarse and medium soils with 2 - 5% organic matter; 10 lbs on 
fine soils with 2 - 5% organic matter and on all soils with 5 - 10% organic matter; 
and use the lower rate in range in areas receiving less than 20 inches total annual 
rainfall and irrigation.
TREE AND VINE CROPS-CITRUS,
FRUIT AND NUT CROPS AND VINEYARDS
For new plantings to almond, apricot, grapefruit, lemon, nectarine, orange, peach, 
pecan, plum, prune, tangelo, tangerine, and walnut trees, apply and incorporate 
Trifluralin 10G before planting.
Broadcast Application Rates/Acre:
 Soil Texture Trifluralin 10G
 Coarse 5 lbs
 Medium 6.25 - 7.5 lbs
 Fine 7.5 lbs
Use 7.5 - 10 lbs on all soils with 2 - 5% organic matter; 10 lbs on all soils with 
5-10% organic matter. Use lower rate in rate range in areas receiving less than 20 
inches total annual rainfall and irrigation. For new plantings of vineyards, apply and 
incorporate Trifluralin 10G before planting at the following rate/acre:
 Soil Texture Trifluralin 10G
 Coarse 5 - 7.5 lbs
 Medium 7.5 - 15 lbs
 Fine 15 - 20 lbs
Use 15 - 20 lbs on all soils with 2 - 10% organic matter. Use the lower rate in rate 
range in areas receiving less than 20 inches total annual rainfall and irrigation. Do 
not use more than 10 lbs/acre on heat treated grape rooting.
Trifluralin 10G may be applied at a rate of 10 lbs - 20 lbs in established non-bearing 
and bearing vineyards and planting of almond, apricot, grapefruit, lemon, nectar-
ine, orange peach, pecan, plum, prune, tangelo, tangerine, and walnut trees. In 
established plantings apply to the soil surface and use incorporation methods not 
injurious to the crop. Do not apply to vineyards within 60 days of harvest.
CONTAINER GROWN ORNAMENTALS, LANDSCAPE 
ORNAMENTALS, NURSERY STOCK, GROUND COVERS, 
ESTABLISHED FLOWERS, ORNAMENTAL BULBS, NON-
BEARING FRUIT AND NUT TREES AND NON-BEARING 
VINEYARDS, AND CHRISTMAS TREE PLANTATIONS
Trifluralin 10G is recommended as a preemergence treatment for control of certain 
annual grasses and broadleaf weeds in container grown ornamentals, landscape 
ornamentals, nursery stock, ground covers, established flowers, ornamental bulbs, 
non-bearing fruit and nut trees and non-bearing vineyards, and Christmas tree 
plantations. Apply 40 lbs./A (.9 lbs./1000 sq.ft.) Trifluralin 10G before or after plant-
ing but prior to germination of target weeds, or immediately after cultivation. Length 
of weed control will vary with weed population, potting media or soil conditions, 
temperature, watering regime, and other factors. Following application, user should 
monitor and observe level of weed control over time to determine when additional 
applications may be needed. Repeat application should not be made sooner than 
60 days after a previous application of Trifluralin 10G. Do not apply over 120 
pounds per acre total of Trifluralin 10G within a 12-month period. 
Trifluralin 10G does not control established weeds. Existing weeds should be con-
trolled by cultivation or with postemergence herbicides. Weed residues, prunings 
and trash should be removed or thoroughly mixed into soil prior to treatment. Soil 
should be in good condition and free of clods at the time of application. A single 
rainfall or sprinkler irrigation of 0.5 inches or more, or flood irrigation, is required to 
activate Trifluralin 10G. Optimum weed control is obtained when Trifluralin 10G is 
activated within 3 days of application. If rainfall or irrigation has not occurred within 
3 days of application and tillage is possible, Trifluralin 10G may be activated using 
cultivation equipment capable of uniformly mixing the herbicide into the upper 
1-2 inches of soil. Failure to activate Trifluralin 10G within 3 days of application 
may result in erratic weed control. Do not apply when wind conditions favor drift 
of Trifluralin 10G granules from the target area. Optimum weed control will be 
obtained when followed by overhead irrigation or rainfall within a few hours after 
surface application. 
Special Use Precautions: To avoid possible injury, do not apply Trifluralin 10G to: 
• Nursery forest or Christmas Tree seedling beds, cutting beds, or transplant beds
• Unrooted liners or cuttings that have been planted in pots for the first time
• Pots less than four inches wide
• Ground covers until they are established and well rooted 
Do not apply Trifluralin 10G to newly transplanted ornamentals, nursery stock, 
ground covers, flowers, and non-bearing fruit and nut crops and non-bearing vine-
yards until soil or potting media has been settled by packing and irrigation or rainfall 
and no cracks are present or injury may occur.
 
Do not make preplant applications of Trifluralin 10G to areas where gladioli corms 
less than one inch in diameter will be planted or injury may occur. 
Do not apply Trifluralin 10G in greenhouse or other enclosed structures. 
Users who wish to use Trifluralin 10G on plant species not recommended on 
this label may determine suitability for such uses by making trial application of 
Trifluralin 10G at a recommended rate to small numbers of plants. Prior to using 
Trifluralin 10G on a large number of plants, the treated plants should be observed 
for signs of herbicidal injury during 30 to 60 days of normal growing conditions to 
determine if the treatment is non-injurious to the target plant species. The user 
assumes responsibility for any plant damage or other liability resulting from the 
use of Trifluralin 10G on plant species not recommended on this label. Trifluralin 
10G may be used on the following established plant species when container grown 
or field grown: 
TREES
Scientific Name Common Name
Abies balsamea Balsam fir
Abies concolor White fir
Abution hybridum Albus-flowering maple
 Luteus-flowering maple
 Roseus-flowering maple
 Tangerine-flowering maple
 Vesuvius red-flowering maple
Acer gimmala Flame maple
Acer platanoides Norway maple
Acer rubrum Red maple
 Red sunset maple
Acer saccharinum Silver maple
Acer saccharum Sugar maple
Areacastrum romanzoffianum Queen palm
Betula nigra River birch
Betula papyrifera Paper birch
Betula pendula European white birch
Brachychiton populneus Bottle tree
Bucida buceras Black olive
Castanea mollissima Chinese chestnut
Ceratonia siliqua Carob
Cercis canadensis Redbud
Chamaecyparis obtusa Filicoides-fernspray cypress
 Gracilis-slender Hinoki cypress
Chamecyparis pisifera Swara false cypress
 Squarrosa-moss cypress
Chamaedorea cataractarum Palm
Chamaedorea costaricana Palm
Chamaedorea elegans Parlor Palm
Cornus florida Cloud nine dogwood
 Flowering dogwood
Cornus kousa Dogwood, kousa
Crataegus viridis Green hawthorn
Cupaniopsis anacardioides Carrot wood
Cupressus glabra Arizona cypress
Elaeagnus angustifolia Russian olive
Eucalyptus camaldulenisis Redgum eucalyptus
Eucalyptus cinerea Mealy eucalyptus
 Silver dollar eucalyptus
Eucalyptus microtheca Coolibah tree
Eucalyptus sideroxyion Red ironbark eucalyptus
Ficus benjamina Ficus
 Mini ficus
Fraxinus americana White ash
Fraxinus udhei Shamel ash
Ginko biloba Ginko-maidenhair tree
Gleditsia triacanthos
 Honey locust
 Shademaster honey locust
Heteromeles arbutiflora Toyon
Illicium floridanum Florida anise-tree
Juniperus virginiana Eastern red cedar
Larix kaempferi Japanese larch
Liquidambar styraciflue American sweet gum
7

TRIFLURALIN 10G
EPA REG. NO. 34704-790
Trees cont’d.:
Scientific Name Common Name
Liriodendron tuilipifera Tuliptree
Magnolia grandiflora Southern magnolia
Malus spp. Crabapple
Morus alba White mulberry
Musa aluminata Banana
Nyssa sylvatica Blackgum
Oxydendrum arboreum Sourwood
Picea abies Norway spruce
 Pendula-weeping Norway spruce
 Repens-spreading Norway spruce
Picea glauca conica Dwarf Alberta spruce
Picea glauca White spruce
Picea pungens Dwarf globe blue spruce
 Glauca-Colorado blue spruce
 Hoopsii-Hoop blue spruce
 Koster-Koster blue spruce
Pinus aristata Bristlecone pine
Pinus canariensis Canary Island pine
Pinus contorta Shore pine, beach pine
Pinus eldarica Eldarica pine
Pinus leucodermis Bosnian pine
Pinus mugo Pumilio-shrubby swiss mountain 
 pine
Pinus nigra Austrian black pine
Pinus radiata Monterey pine
Pinus resinosa Red pine
Pinus taeda Loblolly pine
Pinus strobus White pine
Pinus sylvestris Columnar Scotch pine
 Scotch pine
Pinus thunbergiana Japanese black pine
Platanus acerifolia London planetree
Platanus occicentalis American sycamore
Platanus racemosa California sycamore
Podocarppus spp. Podocarpus
Populus deltoids Cottonwood
Prosopis chilensis Chilian mesquite
Prunus yedoensis Yoshino flowering cherry
Pseudotsuga menziesii Douglas fir
Quercus coccinea Scarlet oak
Quercus ilicifolia Bear oak
Quercus palustris Pin oak
Quercus phellos Willow oak
Quercus rubra Red oak
Quercus virginiana Live oak
Robinia pseudoacacia Black locust
Salix spp. Willow
Sequoiadendron giganteum Giant sequoia
Swietenia mahogani Mahogany
Tabebuia caraiba Yellow tab
Taxodium distichum Bald cypress
Tsuga canadensis Eastern hemlock
Ulmus parvifolia
 Chinese elm
Washingtonia robusta Mexican fan palm
ORNAMENTAL SHRUBS
Scientific name Common Name 
Abelia grandiflora Edward Goucher abelia 
 Glossy abelia 
Acacia abyssinica Abyssinica acacia
Acacia redolens Prostrate acacia
Acacia stenophylla Shoestring acacia
Acalypha wilkesiana Copper leaf
Acer ginnala Amur maple
Acer palmatum Coral bark Japanese maple
 Dwarf Japanese maple
Agave americana Century plant
Astilbe chinensis False spiraea
Athyrium nipponimcum Japanese painted fern
Baccharis pilularis Coyotebush
Berberis gladwynensii William Penn barberry
Berberis mentorensis Mentor barberry
Berberis thunbergii Atropurea-redleaf Japanese 
 barberry
 Aurea-golden Japanese barberry
 Crimson pygmy barberry
 Rose glow barberry
Ornamental Shrubs cont’d.:
Scientific name Common Name 
Bougainvillea spp. Barbara Karst
 California gold 
 Pink pixie
 Scarlet O’Hara
 Temple fire
 Texas dawn
Buxus microphylla japonica Japanese boxwood
Buxus microphylla Koreana Korean boxwood
Buxus sempervirens Common boxwood
Callistemon citrinus Lemon bottlebrush
Callistemon viminalis Weeping bottlebrush
Calluna vulgaris Spring torch scotch heather
Camellia sasanqua Sasanqua camellia
Camellia japonica Japanese camellia
Cassia artemisioides Feathery cassia
Ceanothus spp. Wild lilac
Cephalotaxus drupacae Plum yew
Cerastium tomentosum Snow-in-summer
Chamaecyparis obtusa spp. Kosteri cypress
 Nana-dwarf Hinoki cypress
 Torulosa cypress
Chamaecyparis pisifera Filifera-thread cypress
Chrysalidocarpus lutescens Areca palm
Clethra alnifolia Summersweet
Cleyera japonica Japanese cleyera
Cornus alba Sibirica-Siberian dogwood
Cornus stolonifera Baileyi red osier dogwood
 Flaviraqmea-yellow twig dogwood
Cotinus coggygria Royal purple smoke tree
Cotinus dammeri Coral beauty smoke tree
 Eichholz smoke tree
Cotoneaster adpressus Praecox-early cotoneaster
Cotoneaster apiculatus Cranberry cotoneaster
Cotoneaster congestus Pyrenees cotoneaster
Cotoneaster dammeri Bearberry cotoneaster
Cotoneaster himalayan Himalayan cotoneaster
Cotoneaster horizontalis Rock cotoneaster
Cotoneaster zabelii Zabel cotoneaster
Cycas revoluta Saga palm
Cytisus praecox Hollandia-warminster broom
Cytisus scoparius Lena-Scotch broom
Daphne odora Fragrant daphne
Deutzia spp. Deutzia
Dodonea viscose Hopseed bush
Elaeagnus pungens Fruitland silver berry
Erica cinerea Purple bell heather
Erica x darleyensa Mediterranean pink heather
Erica vagans Cornish heather
Euonymus alatus Winged euonymus
Euonymus fortunei Candale gold euonymus
 Emerald’n gold euonymus
 Sunspot euonymus
 Wintercreeper euonymus
Euonymus japonica Silver king- euonymus
 Variegated evergreen euonymus
Euonymus kiautschovica Spreading euonymus
Feijoa sellowiana Pineapple guava
Forsythia spp. Forsythia
Gradenia jasminoides August beauty gardenia 
 Gardenia
 Radican gardenia
Gaultheria shallon Salal/lemon leaf
Gelsemium sempervirens Carolina jessamine
Genista pilosa Woadwaxen
Hibiscus rosa-sinensis Ross Estey-hibiscus
Hibiscus syriacus Rose of Sharon-heart
 Rose of Sharon-red bird
 Rose of Sharon-woodbridge
Ilex spp. Holly
Illicium annisatum Mystery gardenia
Itea ilcifolia Henry Garnet holly leaf sweetspire
Ixora collinea Ixora
Juniperus spp. Juniper
Kalmia latifolia Mountain laurel
Lagerstroemia indica Crape myrtle
Lantana spp. Lantana
Leucothoe axillaris Coast leucothoe
Leucothoe fontainesiana Drooping leucothoe
Ligustrum spp. Privet
8

TRIFLURALIN 10G
EPA REG. NO. 34704-790
Ornamental Shrubs cont’d.:
Scientific name Common Name 
Livistona chinensis Chinese fountain palm
Lonicera periclymenum Flowering woodbine
 Serotina woodbine
Lonicera sempervirens Trumpet honeysuckle
Mahonia bealei Leather leaf mahonia
Mahonia repens Creeping mahonia
Myrica cerifera Wax myrtle
Nandina domestica Compacta-dwarf heavenly bamboo
 Harbour dwarf-heavenly bamboo
 Heavenly bamboo
 Nana compacta-heavenly bamboo
 Nana purpurea-heavenly bamboo
 Woods dwarf heavenly bamboo
Nerium oleander Hardy red oleander
 Oleander
 Ruby lace oleander
Osmanthus fortunei Fortunes osmanthus
Philadelphus spp. Mockorange
Phoenix roeloelenii Pigmy date palm
Photinia fraseri Fraser’s photinia
Pieris japonica Japanese andromeda
 Mountain fire lily-of-the-valley
 Snowdrift lily-of-the-valley
 Templebells lily-of-the-valley
 Valley rose lily-of-the-valley
 Valley valentine lily-of-the-valley
Pieris japonica x forestii Forest flame lily-of-the-valley
Pinus mugo Mugo-mugho pine
Pittosporum tibira Green pittosporum
 Japanese pittosporum
 Wheeler’s dwarf pittosporum
Plumbago ariculata Blue cape plumbago
Plumbago capensis Plumbago
Podocarpus macrophyllus Yewpine
Polystichum polyblepharum Tallen fern
Potentilla spp. Cinquefoil
Prunus caroliniana Carolina laurel cherry
Prunus gladulosa Dwarf pink flowering almond
Pyracantha spp. Pyracantha
Rhaphiolepis indica Charisma-Monruce rhaphiolepis
 Enchantress-Moness rhaphiolepis
 India hawthorn
 Springtime-Monme rhaphiolepis
Rhaphiolepis ovata Roundleaf rhaphiolepis
Rhododendron spp. Azalea/rhododendron
Rhus lancea Africa sumac
Rosa rugosa Ramanas rose
Rosmarinus officinalis Rosemary
Skimmia japonica Japanese skimmia
Skimmia revesiana Reeve’s skimmia
Spiraea japonica Dolchia spiraea
 Japanese alpine spiraea
 Shirobana spiraea
Spiraea vanhouttii Bridal wreath
Syringa rothomangensis Chinese lilac
Syringa vulgaris Common lilac
Taxus cuspidata Upright Japanese yew
Taxus media Anglojap yew
Tecomaria capensis Cape honeysuckle
Temstroemia gymnanthera
Thuja occidentalis American arborvitae
 Emerald arborvitae
 Globosa-globe arborvitae
 Little giant-dwarf arborvitae
 Nigra-dark American arborvitae
 Pyramidalis-pyramid arborvitae
 Rheingold arborvitae
 Techny arborvitae
Thuja orientalis Aureus nana-dwarf golden 
 arborvitae
 Minima glauca-dwarf arborvitae
Veitchia merrilli Christmas palm
Viburnum spp. Viburnum
Weigela spp. Weigela
Xylosma congestum Xylosma
Yucca filamentosa 
Yucca
GROUND COVERS
Scientific Name Common Name
Achillea tomentosa Wooly yarrow
Agapanthus spp. Lily-of-the-nile
Ammophila breviligulata Beechgrass
Arctotheca calendula Cape weed
Armeria maritima Thrift
Asparagus densiflorus Asparagus fern
Campanula spp. Bellflower
Carex spp. Variegated carex
Carpobrotus edulis Largeleaf iceplant
Ceratostigma plumbaginoides Dwarf plumbago
Cistus spp. Rockrose
Coreopsis spp. Coreopsis
Coronilla vana Crown vetch
Cortaderia selloana Pampas grass
Cotoneaster spp. Cotoneaster
Delosperma alba White iceplant
Descampsia caespitosa Descampsia
Drosanthemum floribundum Trailing rosea iceplant
Drosanthemum hispidum Iceplant
Festuca ovina glauca Blue fescue
Fragaria chiloensis Strawberry beach
Gazania spp. Gazania
Hakonechloa marcroaureola Golden hakonechloa
Hedera canariensis Algerian ivy
Hedera helix English ivy
Hemerocallis spp. Daylilly
Herniaria glabra Rupturewort
Hosta lancifolia Albo-marginata hosta
Hypericum spp. Aaronsbeard
 St. Johnswort
Jasminum nitidum Angelwing jasmine
Lampranthus spectabilis Trailing iceplant
Liriope gigantea White lily turf
Liriope muscari Big blue lily turf
 Lilac beauty lily turf
 Magestic lily turf
 Silvery sunproof lily turf
 Variegated liriope lily turf
Liriope spicata Green/creeping lily turf
Miscanthus sinensis Eulalia grass
Muehlenbeckia axillaris Creeping wirevine
Myoporum laetum Myoporum
Ophiopogon japonicus Dwarf Mondo grass
 Mondo grass
Osteospermum fruticosum Trailing African daisy
Pachysandra terminalis Japanese spurge
Pennisetum alopecuroides Fountain grass
Phalaris arundinacea picta Ribbon grass
Sedum spp. Stonecrop (sedum)
Teucrium chamaedrys Germander
Trachelospermum asiaticum Asian jasmine
Verbena
 spp. Verbena
Veronica spp. Speedwell
Vinca spp. Periwinkle
ESTABLISHED FLOWERS
Scientific Name Common Name
Achillea spp. Yarrow
Ageratum houstonianum Floss flower
Alyssum spp. Alyssum
Antirrhinum majus Snapdragon
Arctotis spp. African daisy
Artemisis stellerana Dusty miller
Aster spp. Aster (perennial)
Calendula Officianalis Calendula
Centaurea cyanus Cornflower
Centaurea gymnocarpa Velvet centaurea
Centaurea moschata Sweet sultan
Chrysanthemum spp. Chrysanthemum
Convolvulus spp. Morningglory
Coreopsis spp. Coreopsis
Cosmos spp. Cosmos
Dahlia spp. Dahlia
Dianthus spp. Dianthus
Dimorphotheca spp. Marigold, cape
Euphorbia marginata Snow-on-the-mountain
Geum spp. Geum
Gaillardia spp. Gaillardia
Gladiolus spp. Gladiolus
Gypsophila paniculata Baby’s breath
Helianthus spp. Sunflower
Impatiens balsamina Balsam
Impatiens spp. Impatiens
Ixora spp. Ixora
Lathyrus odoratus Sweet pea
Limonium spp. Statice
Lobelia spp. Lobelia
Lobularia maritima Sweet alyssum 
Lupinus spp. Lupine
Matthiola spp. Stock
9

TRIFLURALIN 10G
EPA REG. NO. 34704-790
Established Flowers cont’d.:
Scientific Name Common Name
Mirabilis jalapa Four o’clock
Myosotis spp. Forget-me-not
Nicotiana spp. Nicotiana
Papver spp. Poppy, California
Petunia hybrida Petunia
Phlox spp. Phlox
Portulaca grandiflora Portulaca
Rosa spp. Rose
Rudbeckia hirta Blackeyed susan
Rudbeckia laciniata Golden glow
Salvia spp. Salvia
Scabinosa spp. Pincushion flower
Stachys spp. Lamb’s ears
Stokesia laevis Stoke’s aster
Tagetes spp. Marigold
Tropaeolum spp. Nasturtium
Vinca spp. Vinca
Zinnea spp. Zinnia
ORNAMENTAL BULBS
Trifluralin 10G may be applied for control of susceptible annual weeds in ornamen-
tal bulbs, e.g., bulbous iris, daffodil (narcissus), hyacinth and tulip. Apply Trifluralin 
10G to the soil surface 2-4 weeds after planting, but prior to the emergence of 
annual weeds. Trifluralin 10G may also be applied following bulb emergence. 
For fall planted bulbs, apply Trifluralin 10G again in late winter or early spring to 
weed-free soil surfaces. 
CHRISTMAS TREE PLANTATIONS
Apply Trifluralin 10G to established plantings of field grown Christmas tree species 
listed on this label. Do not apply to seedbeds or seedling transplant beds. Apply 
only to established plantings. Established plants are defined as those that have 
been transplanted into their final growing location for a sufficient period of time 
to allow the soil to be firmly settled around the roots from packing and rainfall or 
irrigation. 
NON-CROPLAND AREAS
Trifluralin 10G is recommended as a preemergence herbicide for control of certain 
annual grasses and broadleaf weeds on industrial sites, utility substations, high-
way guard rails, sign posts and delineators. 
Apply Trifluralin 10G anytime prior to germination of target weeds. Areas to be 
treated should be free of established weeds or existing weeds should be controlled 
with postemergence herbicides. 
USE UNDER PAVED SURFACES
Site Preparation
Trifluralin 10G should be used only where the area to be treated has been pre-
pared according to good construction practices. If rhizomes, stolons, tubers or 
other vegetative plant parts are present in the site, they should be removed by 
scalping with grader blade to a depth sufficient to ensure their complete removal. 
Application
Applications should be made only when final grade is established or after additions 
of base rock. Do not move soils following Trifluralin 10G application and do not 
apply Trifluralin 10G to areas where asphalt is to be laid directly on top of soil. 
Paving should follow Trifluralin 10G applications as soon as possible. 
Apply Trifluralin 10G to ensure thorough coverage of the base rock layer. Apply 
with any granular applicator that will apply uniformly. 
Apply the following amount of Trifluralin 10G 
Amount of Trifluralin 10G 
 Per Acre Per 1000 sq. ft. 
 120-160 lbs 2.75-3.65 lbs
TREE AND VINE CROPS-CITRUS, FRUIT AND NUT TREES, AND 
VINEYARDS
New Plantings of Citrus, Fruit and Nut Trees
For new plantings of almond, apricot, grapefruit, lemon, nectarine, orange, peach, 
pecan, plum, prune, tangelo, tangerine and walnut trees, apply and incorporate 
Trifluralin 10G before transplanting. 
Broadcast Rates Per Acre: 
 Soil Texture Trifluralin 10G 
 Coarse 5 lbs. 
 Medium 6.25-7.5 lbs. 
 Fine 7.5 lbs
• All soils with 2-5% organic matter - 7.5-10 lbs./A
• All soils with 5-10% organic matter - 10lbs./A
• Use lower rate in range in areas receiving less than 20 inches total annual rain 
 fall and irrigation. 
New Plantings of Vineyards
Apply and incorporate Trifluralin 10G before planting. 
Broadcast Rates Per Acre: 
 Soil Texture Trifluralin 10G 
 Coarse 5-7 lbs.
 Medium 7.5-15 lbs.
 Fine 15-20 lbs.
• All soils with 2-10% organic matter - 15-20 lbs./A
• Use lower rate in rate range in areas receiving less than 20 inches total annual 
 rainfall and irrigation.
Note: Do not use more than 10 lbs./A on mist propagated grape rootings. 
Established Non-bearing and Bearing Citrus, Fruit and Nut Trees, and 
Vineyards
Trifluralin 10G may be applied in established non-bearing and bearing vineyards 
and plantings of almond, apricot, grapefruit, lemon, nectarine, orange, peach, 
pecan, plum, prune, tangelo, tangerine, and walnut trees. In established plant-
ings, apply Trifluralin 10G to the soils surface and incorporate using methods not 
injurious to the crop. Do not apply to vineyards within 60 days of harvest. 
Broadcast Rates Per Acre: 
 Soil Texture Trifluralin 10G
 All soils 10-20 lbs
• Use the higher rate in the rate range for longer term weed control.
STORAGE AND DISPOSAL
Do not contaminate water, food, or feed by storage or disposal.
Storage: Store in original container only. In case of spill, contain material and 
dispose as waste.
Pesticide Disposal: Wastes resulting from the use of this product may be 
disposed of on site or at an approved waste disposal facility.
Container Handling: Nonrefillable container. Do not reuse or refill this 
container. Completely empty bag into application equipment by shaking and 
tapping sides and bottom to loosen clinging particles. Offer for recycling if 
available or dispose of empty bag in a sanitary landfill or by incineration. Do 
not burn, unless allowed by state and local ordinances.
For help with any spill, leak, fire or exposure involving this material, call 
day or night CHEMTREC – 1-800-424-9300.
 
CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY
BEFORE BUYING OR USING THIS PRODUCT , read the entire Directions for Use 
and the following Conditions of Sale and Limitation of Warranty and Liability. By buy-
ing or using this product, the buyer or user accepts the following Conditions of Sale 
and Limitation of Warranty and Liability, which no employee or agent of LOVELAND 
PRODUCTS, INC. or the seller is authorized to vary in any way.
Follow the Directions for Use of this product carefully. It is impossible to eliminate 
all risks inherently associated with the use of this product. Crop or other plant injury, 
ineffectiveness, or other unintended consequences may result from such risks as 
weather or crop conditions, mixture with other chemicals not specifically identified in 
this product’s label, or use of this product contrary to the label instructions, all of which 
are beyond the control of LOVELAND PRODUCTS, INC. and the seller. The buyer or 
user of this product assumes all such inherent risks.
Subject to the foregoing inherent risks, LOVELAND PRODUCTS, INC. warrants 
that this product conforms to the chemical description on the label and is rea-
sonably fit for the purposes stated in the Directions for Use when the product is 
used in strict accordance with such Directions for Use under normal conditions 
of use. EXCEPT AS WARRANTED IN THIS LABEL AND TO THE EXTENT 
CONSISTENT WITH APPLICABLE LAW, THIS PRODUCT IS SOLD “AS IS,” AND 
LOVELAND PRODUCTS, INC. MAKES NO OTHER WARRANTY, EXPRESS OR 
IMPLIED, INCLUDING BUT NOT LIMITED TO MERCHANTABILITY, FITNESS 
FOR A PARTICULAR PURPOSE, OR ELIGIBILITY OF THIS PRODUCT FOR ANY 
PARTICULAR TRADE USAGE.
IN THE UNLIKELY EVENT THAT BUYER OR USER BELIEVES THAT LOVELAND 
PRODUCTS, INC. HAS BREACHED A WARRANTY CONTAINED IN THIS LABEL 
AND TO THE EXTENT REQUIRED BY APPLICABLE LAW, BUYER OR USER 
MUST SEND WRITTEN NOTICE OF ITS CLAIM TO THE FOLLOWING ADDRESS: 
LOVELAND PRODUCTS, INC., ATTENTION: LAW DEPARTMENT, P.O. BOX 1286, 
GREELEY, CO 80632-1286.
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE BUYER’S 
OR USER’S EXCLUSIVE REMEDY FOR ANY INJURY, LOSS, OR DAMAGE 
RESULTING FROM THE HANDLING OR USE OF THIS PRODUCT, INCLUDING 
BUT NOT LIMITED TO CLAIMS OF BREACH OF WARRANTY OR CONTRACT, 
NEGLIGENCE, STRICT LIABILITY, OR OTHER TORTS, SHALL BE LIMITED TO 
ONE OF THE FOLLOWING, AT THE ELECTION OF LOVELAND PRODUCTS, INC. 
OR THE SELLER: DIRECT DAMAGES NOT EXCEEDING THE PURCHASE PRICE 
OF THE PRODUCT OR REPLACEMENT OF THE PRODUCT. TO THE EXTENT 
CONSISTENT WITH APPLICABLE LAW, LOVELAND PRODUCTS, INC. AND THE 
SELLER SHALL NOT BE LIABLE TO THE BUYER OR USER OF THIS PRODUCT 
FOR ANY CONSEQUENTIAL, SPECIAL, OR INDIRECT DAMAGES, OR DAMAGES 
IN THE NATURE OF A PENALTY.
Melroe is a registered trademark of Clark Equipment Company.
FORMULATED FOR
LOVELAND PRODUCTS, INC.
P.O. BOX 1286, GREELEY, COLORADO 80632-1286
10