crop-chem-docs/corpus/epa_ppls/62719-421.md

# INDAR 75 WSP

- EPA Reg No: **62719-421**
- Registrant: CORTEVA AGRISCIENCE LLC
- Signal word: Caution
- Active ingredients: Fenbuconazole (75%)
- Label accepted: 2011-06-22
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/062719-00421-20110622.pdf

---
UNITED STATES ENVIRONMENTAL PROTECTION AGENCYWASHINGTON, DC 20460
* *^ CHEMICAL SAFETY AND
POLLUTION PREVENTION
Dow AgroSciences
Darin Lickfeldt, Ph.D.
9330 Zionsville Road ,,,w 0 «
Indianapolis, IN 46268 JUW Z L
Subject: Indar 75WSP
EPA Reg. No. 62719-421
Amended Labeling
EPA Decision Number 447659
Dear Dr. Lickfeldt,
The amended label referred to above, submitted in connection with registration under the Federal
Insecticide, Fungicide and Rodenticide Act as amended is acceptable.
One copy of the label stamped "Accepted" is enclosed for your records. This label supersedes all
labels previously accepted for this product. Please submit one copy of the final printed label
before the product is released for shipment.
If you have any questions, please contact Erin Malone by phone at (703) 347-0253 or via email
at malone.erin@epa.gov.
Sincerely,
Product Manager (20)
Fungicide Branch
Registration Division (7504P)
Enclosure: Master Label Stamped "Accepted"

A3B / Indar 75WSP / MSTR Amend / 06-08-11 Page 1
Group
(Base label):
Indar® 75WSP
Fungicide
Active Ingredient
fenbuconazole: a-[2-(4-chlorophenyl)ethyl]-
a-phenyl-1H-1,2,4-triazole-1-propanenitrile.. 75%
Other Ingredients 25%
Total 100%
Keep Out Of Reach Of Children
CAUTION
FUNGICIDE
ACCEPTED
JUN 2 2 2011
Under the Federal Insecticide,Fungicide, and Rodenticide Act,as amended, for the pesticideregistered undeEFA Reg No
First Aid
If on skin or clothing: Take off contaminated clothing. Rinse skin immediately with plenty of water for
15-20 minutes. Call a poison control center or doctor for treatment advice.
If swallowed: Call a poison control center or doctor immediately for treatment advice. Have person sip a
glass of water if able to swallow. Do not induce vomiting unless told to do so by a poison control center or
doctor. Do not give anything by mouth to an unconscious person.
Have the product container or label with you when calling a poison control center or doctor, or going for
treatment. You may also contact 1-800-992-5994 day or night for emergency treatment information.
Precautionary Statements
Hazards to Humans and Domestic Animals
CAUTION
Harmful If Swallowed Or Absorbed Through The Skin
Avoid contact with skin, eyes or clothing.
Personal Protective Equipment (PPE)
Some materials that are chemical-resistant to this product are listed below. If you want more options,
follow the instructions for category A on an EPA chemical resistance category selection chart.
Applicators and other handlers must wear:
• Long-sleeved shirt and long pants
• Shoes plus socks
• Chemical-resistant gloves made of any waterproof material such as polyvinyl chloride, nitrile rubber, or
butyl rubber
• Chemical-resistant headgear for overhead exposure
User Safety Requirements
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables
exist, use detergent and hot water. Keep and wash PPE separately from other laundry.

A3B / Indar 75WSP / MSTR Amend / 06-08-11 Page 2
Engineering Controls
When handlers use closed systems enclosed cabs or aircraft in a manner that meet the requirements
listed in the Worker Protection Standards (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-6)], the
handler PPE requirements may be reduced or modified as specified in the WPS.
User Safety Recommendations
Users should:
• Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet.
• Remove clothing/PPE immediately if pesticides get inside. Then wash and put on clean clothing.
• Remove PPE immediately after handling product. Wash outside of gloves before removing. As soon as
possible, wash thoroughly and change into clean clothing.
Environmental Hazards
This product is toxic to fish. Do not apply directly to water, or to areas where surface water is present, or
to intertidal areas below the mean high-water mark. Drift or runoff from treated areas may be hazardous
to aquatic organisms in adjacent aquatic sites. Do not contaminate water when disposing of equipment
washwaters or rinsate.
Agricultural Use Requirements
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR
Part 170. Refer to the label booklet under "Agricultural Use Requirements" in the Directions for Use
section for information about this standard.
(Storage and Disposal for rigid containers 5 gal or less)
Storage and Disposal
Do not contaminate water, food, or feed by storage and disposal.
Pesticide Storage: Store in a cool, dry area above freezing. If in a water soluble pouch, the water soluble
pouch may become brittle at storage temperatures below 32°F but the fungicide is not affected. Do not
remove the water soluble pouches from container except for immediate use.
Pesticide Disposal: Wastes resulting from the use of this product may be disposed of on site or at an
approved waste disposal facility.
Container Handling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if
available.
Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows:
Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the
flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate
into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds
after the flow begins to drip. Repeat this procedure two more times. Pressure rinse as follows: Empty
the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after
the flow begins to drip. Hold container upside down over application equipment or mix tank or collect
rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at
about 40 psi for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. Then offer for
recycling if available. Or puncture and dispose of in a sanitary landfill, or by incineration, or by other
procedures allowed by state and local authorities.
(Storage and Disposal for nonrigid containers any size)
Storage and Disposal
Do not contaminate water, food, or feed by storage and disposal.
Pesticide Storage: Store in a cool, dry area above freezing. If in a water soluble pouch, the water soluble
pouch may become brittle at storage temperatures below 32°F but the fungicide is not affected. Do not
remove the water soluble pouches from container except for immediate use.
Pesticide Disposal: Wastes resulting from the use of this product may be disposed of on site or at an
approved waste disposal facility.

A3B / Indar 75WSP / MSTR Amend / 06-08-11 Page 3
Container Handling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if
available.
(Storage and Disposal for refillable rigid containers greater than 5 gal)
Storage and Disposal
Do not contaminate water, food, or feed by storage and disposal.
Pesticide Storage: Store in a cool, dry area above freezing. If in a water soluble pouch, the water soluble
pouch may become brittle at storage temperatures below 32°F but the fungicide is not affected. Do not
remove the water soluble pouches from container except for immediate use.
Pesticide Disposal: Wastes resulting from the use of this product may be disposed of on site or at an
approved waste disposal facility.
Container Handling: Refillable container. Refill this container with pesticide only. Do not reuse this
container for any other purpose.
Cleaning the container before final disposal is the responsibility of the person disposing of the container.
Cleaning before refilling is the responsibility of the refiller. To clean the container before final disposal,
empty the remaining contents from this container into application equipment or a. mix tank. Fill the
container about 10% full with water and, if possible, spray all sides while adding water. If practical, agitate
vigorously or recirculate water with the pump for two minutes. Pour or pump rinsate into application
equipment or rinsate collection system. Repeat this rinsing procedure two more times. Then offer for
recycling if available. Or puncture and dispose of in a sanitary landfill, or by incineration, or if allowed by
state and local authorities, by burning. If burned, stay out of smoke.
(Storage and Disposal for nonrefillable rigid containers larger than 5 gal)
Storage and Disposal
Do not contaminate water, food, or feed by storage and disposal.
Pesticide Storage: Store in a cool, dry area above freezing. If in a water soluble pouch, the water soluble
pouch may become brittle at storage temperatures below 32°F but the fungicide is not affected. Do not
remove the water soluble pouches from container except for immediate use.
Pesticide Disposal: Wastes resulting from the use of this product may be disposed of on site or at an
approved waste disposal facility.
Container Handling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if
available.
Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows:
Empty the remaining contents into application equipment or a mix tank. Fill the container 1/4 full with
water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least
one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several
times. Turn the container over onto its other end and tip it back and forth several times. Empty the
rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Repeat this
procedure two more times. Pressure rinse as follows: Empty the remaining contents into application
equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container
upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert
pressure rinsing nozzle in the side of the container, and rinse at about 40 psi for at least 30 seconds.
Drain for 10 seconds after the flow begins to drip. Then offer for recycling if available. Or puncture and
dispose of in a sanitary landfill, or by incineration, or if allowed by state and local authorities, by burning. If
burned, stay out of smoke. .
Refer to label booklet for Directions for Use.
Notice: Read the entire label. Use only according to label directions. Before using this product, read
Warranty Disclaimer, Inherent Risks of Use, and Limitation of Remedies at end of label booklet. If
terms are unacceptable, return at once unopened.
In case of emergency endangering health or the environment involving this product, call 1-800-992-5994.

r rA3B / Indar 75WSP / MSTR Amend/ 06-08-11 Page 4
Agricultural Chemical: Do not ship or store with food, feeds, drugs or clothing.
EPA Reg. No. 62719-421 EPA Est.
®Trademark of Dow AgroSciences LLC
Produced for
Dow AgroSciences LLC
9330 Zionsville Road
Indianapolis, IN 46268
Net Weight

r fA3B/Indar 75WSP/MSTR Amend 706-08-11 Page 5
(Cover, shipping container):
Group 3 FUNGICIDE
Indar® 75WSP
Fungicide
Active Ingredient
fenbuconazole: a-[2-(4-chlorophenyl)ethyl]-
a-phenyl-1hH-1,2,4-triazole-1-propanenitrile.. 75%
Other Ingredients 25%
Total : 100%
Keep Out Of Reach Of Children
CAUTION
First Aid
If on skin or clothing: Take off contaminated clothing. Rinse skin immediately with plenty of water for
15-20 minutes. Call a poison control center or doctor for treatment advice.
If swallowed: Call a poison control center or doctor immediately for treatment advice. Have person sip a
glass of water if able to swallow. Do not induce vomiting unless told to do so by a poison control center or
doctor. Do not give anything by mouth to an unconscious person.
Have the product container or label with you when calling a poison control center or doctor, or going for
treatment. You may also contact 1-800-992-5994 day or night, for emergency treatment information.
Agricultural Use Requirements
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR
Part 170. Refer to the label booklet under "Agricultural Use Requirements" in the Directions for Use
section for information about this standard.
Refer to inside of label booklet for additional precautionary information including Directions for
Use.
Notice: Read the entire label. Use only according to label directions. Before using this product, read
Warranty Disclaimer, Inherent Risks of Use, and Limitation of Remedies at end of label booklet. If
terms are unacceptable, return at once unopened.
In case of emergency endangering health or the environment involving this product, call 1-800-992-5994.
Agricultural Chemical: Do not ship or store with food, feeds, drugs or clothing.
EPA Reg. No. 62719-421 EPA Est.
®Trademark of Dow AgroSciences LLC
Produced for
Dow AgroSciences LLC
9330 Zionsville Road
Indianapolis, IN 46268
Net Weight

A3B / Indar 75WSP / MSTR Amend/ 06-08-11 Page 6
(Page 1 through end):
Precautionary Statements
Hazards to Humans and Domestic Animals
CAUTION
Harmful If Swallowed Or Absorbed Through The Skin
Avoid contact with skin, eyes or clothing.
Personal Protective Equipment (PPE)
Some materials that are chemical-resistant to this product are listed below. If you want more options,
follow the instructions for category A on an EPA chemical resistance category selection chart.
WPS Uses: Applicators and other handlers who handle this pesticide for any use covered by the
Worker Protection Standard (40 CFR Part 170):
• Long-sleeved shirt and long pants
• Shoes plus socks
• Chemical-resistant gloves made of any waterproof material such as polyvinyl chloride, nitrile rubber, or
butyl rubber
• Chemical-resistant headgear for overhead exposure
User Safety Requirements
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables
exist, use detergent and hot water. Keep and wash PPE separately from other laundry.
Engineering Controls
When handlers use closed systems enclosed cabs or aircraft in a manner that meet the requirements
listed in the Worker Protection Standards (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-6)], the
handler PPE requirements may be reduced or modified as specified in the WPS.
User Safety Recommendations
Users should:
Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet.
Remove clothing/PPE immediately if pesticides get inside. Then wash and put on clean clothing.
Remove PPE immediately after handling product. Wash outside of gloves before removing. As soon as
possible, wash thoroughly and change into clean clothing.
Environmental Hazards
This product is toxic to fish. Do not apply directly to water, or to areas where surface water is present, or
to intertidal areas below the mean high-water mark. Drift or runoff from treated areas may be hazardous
to aquatic organisms in adjacent aquatic sites. Do not contaminate water when disposing of equipment
washwaters or rinsate.
Directions for Use
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
Read all Directions for Use carefully before applying.
Do not apply this product in a way that will contact workers or other persons, either directly or through drift.
Only protected handlers may be in the area during application. For any requirements specific to your state
or tribe, consult the agency responsible for pesticide regulation.

o cA3B / Indar 75WSP / MSTR Amend / 06-08-11 Page 7
Agricultural Use Requirements
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR
Part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests,
nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training,
decontamination, notification, and emergency assistance. It also contains specific instructions and
exceptions pertaining to the statements on this label about personal protective equipment (PPE)and
restricted-entry interval. The requirements in this box only apply to uses of this product that are covered
by the Worker Protection Standard.
Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours.
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and
that involves contact with anything that has been treated, such as plants, soil or water, is:
• Coveralls over long-sleeved shirt and pants
• Shoes plus socks
• Chemical-resistant gloves made of any waterproof material such as polyvinyl chloride, nitrile rubber, or
butyl rubber
Storage and Disposal
Do not contaminate water, food or feed by storage or disposal.
Pesticide Storage: Store in a cool, dry area above freezing. If in a water soluble pouch, the water soluble
pouch may become brittle at storage temperatures below 32°F but the fungicide is not affected. Do not
remove the water soluble pouches from container except for immediate use.
Pesticide Disposal: Wastes resulting from the use of this product may be disposed of on site or at an
approved waste disposal facility.
Nonrefillable rigid containers 5 gallons or less:
Container Handling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if
available.
Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows:
Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the
flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate
into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds
after the flow begins to drip. Repeat this procedure two more times. Pressure rinse as follows: Empty
the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after
the flow begins to drip. Hold container upside down over application equipment or mix tank or collect
rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at
about 40 psi for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. Then offer for
recycling if available. Or puncture and dispose of in a sanitary landfill, or by incineration, or by other
procedures allowed by state and local authorities.
Nonrefillable nonrigid containers:
Container Handling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if
available.
Refutable rigid containers larger than 5 gal:
Container Handling: Refillable container. Refill this container with pesticide only. Do not reuse this
container for any other purpose.
Cleaning the container before final disposal is the responsibility of the person disposing of the container.
Cleaning before refilling is the responsibility of the refiller. To clean the container before final disposal,
empty the remaining contents from this container into application equipment or a mix tank. Fill the
container about 10% full with water and, if possible, spray all sides while adding water. If practical, agitate
vigorously or recirculate water with the pump for two minutes. Pour or pump rinsate into application
equipment or rinsate collection system. Repeat this rinsing procedure two more times. Then offer for

A3B/Indar 75WSP/MSTR Amend 706-08-11 Page 8
recycling if available. Or puncture and dispose of in a sanitary landfill, or by incineration, or if allowed by
state and local authorities, by burning. If burned, stay out of smoke.
Nonrefillable rigid containers larger than 5 gal:
Container Handling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if
available.
Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows:
Empty the remaining contents into application equipment or a mix tank. Fill the container 1/4 full with
water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least
one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several
times. Turn the container over onto its other end and tip it back and forth several times. Empty the
rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Repeat this
procedure two more times. Pressure rinse as follows: Empty the remaining contents into application
equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container
upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert
pressure rinsing nozzle in the side of the container, and rinse at about 40 psi for at least 30 seconds.
Drain for 10 seconds after the flow begins to drip. Then offer for recycling if available. Or puncture and
dispose of in a sanitary landfill, or by incineration, or if allowed by state and local authorities, by burning. If
burned, stay out of smoke.
Product Information
Indar® 75WSP fungicide is a systemic fungicide with preventative and curative properties used for the
control of specific diseases listed on this label. For optimal disease control with Indar 75WSP, apply
sprays on a preventive spray program.
Indar 75WSP is considered not hazardous to bees, including those which are actively foraging in the area
during application, when used as directed.
A non-polymer containing spray adjuvant approved for use with registered pesticide products may be
added to spray solutions according to manufacturer's use instructions to achieve optimum disease control.
Do not apply Indar 75WSP in greenhouses.
Resistance Management
Indar 75WSP belongs to the sterol demethylation inhibitor (DMI) class of fungicides or target site of action
Group 3 fungicide. Since certain fungi can develop resistance to this class of products, use Indar 75WSP
as part of a resistance management strategy that includes alternation and/or mixing with fungicides of
different target site of action. Consult your local or state agricultural authorities for resistance
management strategies that are appropriate for your disease management program.
Use Rate Determination
Carefully read, understand and follow label use rates and restrictions. Under low disease conditions, use
minimum application rates, while maximum application rates and shortened spray schedules are for
severe or threatening disease conditions. For proper application, determine the number of acres to be
treated, the label use rate and the gallonage to be applied per acre. Prepare only the amount of spray
solution required to treat the measured acreage. Carefully calibrate spray equipment prior to use.
Handling for Water Soluble Pouches
Do not remove water soluble pouch from overwrap except for immediate use. Do not allow water soluble
pouch to come into contact with water prior to use. Do not handle water soluble pouch with wet hands or
wet gloves. Do not open water soluble pouches. Do not remove packets from overwrap except to add the
intact packet directly into the spray tank. Do not split packets. Partial use of pouches is not allowed.

A3B / Indar 75WSP / MSTR Amend / 06-08-11 Page 9
Carefully reseal overwrap containing unopened water soluble pouches and protect package from
moisture.
Mixing Directions
Always place Indar 75WSP into solution prior to adding co-applied agricultural chemicals registered for
use on specific crop or crops being treated. Add the required number of unopened pouches as
determined by the dosage into the spray tank with agitation. Depending upon the water temperature and
the degree of agitation, the pouches should dissolve completely within approximately ten minutes from the
time they are added to the water. Note: Reduced product efficacy may occur if water containing
suspended soil particles, such as water from ponds, streams or unlined ditches, is used.
Application Directions
Do not make ground or aerial applications within 75 feet of streams, rivers, ponds, lakes or reservoirs.
Ground Application
Thorough coverage sprays generally result in optimum disease control. To achieve good coverage use
proper spray pressure, gallonage per acre, nozzles, nozzle spacing and tractor speed. Consult spray
nozzle and accessory catalogues for specific information on proper equipment calibration. For tree fruits
and nuts, apply the same amount of Indar 75WSP per acre in either dilute or concentrate sprays.
Aerial Application
Apply in a minimum of 5 gallons of water per acre on annual crops and 10 gallons of water per acre on
perennial tree fruits and nuts. Do not apply Indar 75WSP under conditions when uniform coverage cannot
be obtained or when excessive spray drift may occur. Flagmen and loaders should wash thoroughly
before eating, drinking or smoking and at the end of each day's spray operation.
Chemigation Application
Apply Indar 75WSP through properly equipped chemigation systems for disease control in cranberry on a
regular protectant fungicide schedule. Follow use directions for cranberry in the Uses section of this label.
Do not apply Indar 75WSP by chemigation to other labeled crops.
General Directions for Sprinkler Chemigation: Apply Indar 75WSP only through overhead sprinkler
irrigation systems that will apply water uniformly, including center pivot, lateral move, end tow, side (wheel)
roll, traveler, big gun, solid set, or hand move. Do not apply this product through any other type of
irrigation system. Sprinkler systems that deliver a low coefficient of uniformity such as certain water drive
units are not recommended.
Chemigation Preparation: The following use directions are to be followed when this product is applied
through sprinkler irrigation systems. Thoroughly clean the chemigation system and tank of any fertilizer or
chemical residues, and dispose of the residues according to state and federal laws. Flush the injection
system with soap or a cleaning agent and water. Determine the amount of Indar 75WSP needed to cover
the desired acreage. Mix according to instructions in the Mixing Directions section. Continually agitate the
mixture during mixing and application.
Chemigation Equipment Calibration: It is suggested that the injection pump/system be calibrated at
least twice before operation, and the system must be monitored during operation.
Center Pivot, Lateral Move, End Tow, Traveler Irrigation Equipment: Use this equipment only with
electric or oil hydraulic drive systems, which provide a uniform water distribution. In order to calibrate the
irrigation system and injector to apply the mixture containing Indar 75WSP, determine the following: 1)
Calculate the number of acres irrigated by the system; 2) Calculate the time required to apply no more
than 1/4 water (6.750 gallons of water per acre) over the area to be treated when the system and injection
equipment are operated at normal pressures specified by the equipment manufacturer (run system at 80
to 95% of manufacturer's rated capacity); 3) Calculate the injection pump output when operated at normal
line pressure using only water; 4) Calculate the total amount of fungicide mixture needed to cover the

r
A3B / Indar 75WSP / MSTR Amend / 06-08-11 Page 10
desired acreage; 5) Add the required amount of Indar 75WSP and water to meet the injection time
requirements of the solution tank.
Solid Set, Side (Wheel) Roll, Hand Move Irrigation Equipment: In order to calibrate the irrigation
system and injector to apply the mixture containing Indar 75WSP, determine the following: 1) Calculate
the number of acres irrigated by the system; 2) Fill the injector solution tank with water and adjust the flow
rate to use the contents over a 10- to 30-minute interval; 3) Calculate the total amount of fungicide mixture
needed to cover the desired acreage and add Indar 75WSP into the same quantity of water used to
calibrate the injection equipment. Operate the system at normal pressures specified by the manufacturer
and used for the time interval established during calibration.
Chemigation Operation: Start the water pump and irrigation system, and let the system achieve the
desired pressure and speed before starting the injector. Check for leaks and uniformity and make repairs
before any chemigation takes place. Start the injection system and calibrate according to manufacturer's
specifications. This procedure is necessary to deliver the desired rate per acre in a uniform manner.
Inject Indar 75WSP at the end of the irrigation cycle or as a separate application to maximize foliar
fungicide retention. When the application is finished, allow the entire irrigation and injection system to be
thoroughly flushed clean before stopping the system.
Chemigation Precautions:
• Lack of effectiveness or illegal pesticide residues in the crop can result from non-uniform distribution of
treated water.
• If you have questions about calibration, contact state extension service specialists, equipment
manufacturers or other experts.
• Do not connect an irrigation system used for pesticide application (including greenhouse systems) to a
public water system unless the pesticide label prescribed safety devices for public water systems are in
place with current certification. Specific local regulations may apply and must be followed.
• A person knowledgeable of the chemigation system and responsible for its operation, or under the
supervision of the responsible person, shall operate the system and make necessary adjustments
should the need arise and continuously monitor the injection.
• Do not apply when wind speed favors drift beyond the area intended for treatment. End guns must be
turned off during the application if they irrigate nontarget areas.
• Do not allow irrigation water to collect or run off and pose a hazard to livestock, wells, or adjoining crops.
• Do not enter treated area during the reentry interval specified in the Agricultural Use Requirements
section of this label unless required PPE is worn.
• Do not apply through sprinkler systems that deliver a low coefficient of uniformity such as certain water
drive units.
Chemigation Specific Equipment Requirements:
• The system must contain an air gap, or approved back flow prevention device, or approved functional
check valve, vacuum relief valve (including inspection port), and low-pressure drain appropriately
located on the irrigation pipeline to prevent water source contamination from back flow. Refer to the
American Society of Agricultural Engineer's Engineering Practice 409 for more information or state
specific regulations.
• The pesticide injection line must contain a functional, automatic, quick-closing check valve to prevent
the flow of fluid back toward the injection chemical supply.
• A pesticide injection pump must also contain a functional interlock, e.g., mechanical or electrical, to shut
off chemical supply when the irrigation system is either automatically or manually shut down.
• The system must contain functional interlocking controls to automatically shut off the pesticide injection
when the water pressure drops too low or water flow stops.
• Use of public water supply requires approval of a backflow prevention device or air gap (preferred) by
both state and local authorities.
• Systems must use a metering pump, such as a positive displacement injection pump (or flow meter on
eductor), effectively designed and constructed of materials that are compatible with pesticides and

f f
A3B / Indar 75WSP / MSTR Amend/ 06-08-11 Page 11
capable of being fitted with a system interlock. An electric powered pump must meet Section 675 for
"Electrically Driven or Controlled Irrigation Machines" NEC 70.
• To ensure uniform mixing of the fungicide into the water line, inject the mixture in the center of the pipe
diameter or just ahead of an elbow or tee in the irrigation line so that the turbulence created at those
points will assist in mixing. The injection point must be located after all back flow prevention devices on
the water line.
• The tank holding the fungicide mixture should be free of rust, fertilizer, sediment, and foreign material,
and equipped with an in-line strainer situated between the tank and the injection point.
Orchard Use
Apply Indar 75WSP to orchards using a dilute or concentrate spray.
Dilute Spray: Dilute or thorough coverage applications are based upon the amount of spray solution
necessary to thoroughly wet the trees until spray run-off. To determine the number of gallons of dilute
spray required per acre, contact your state agricultural experiment station, certified pest control advisor, or
extension specialist for assistance.
Concentrate Spray: Concentrate spray applications assume all of the tree is uniformly covered with spray
solution but not to the point of run-off. A lower spray volume is used to deliver the same application rate
per acre as used for a dilute spray. Use a minimum of 50 gallons of spray solution per acre for
concentrate sprays with Indar 75WSP.
Aerial Spray Drift Management
Avoiding spray drift at the application site is the responsibility of the applicator. The interaction of many
equipment and weather-related factors determine the potential for spray drift. The applicator is
responsible for considering all these factors when making decisions. The following drift management
requirements must be followed to avoid off-target movement from aerial applications to agricultural field
crops.
• The distance of the outer most nozzles on the boom must not exceed 3/4 the length of the wingspan or
rotor.
• Nozzles must always point backward parallel with the air stream and never be pointed downwards more
than 45 degrees.
Where states have more stringent regulations, they must be observed.
Compatibility
Indar 75WSP is compatible with most commonly used agriculture fungicides, insecticides, growth
regulators, micronutrients and spray adjuvants. When preparing tank mixes, consult spray compatibility
charts or State Cooperative Extension Service Specialists prior to actual use. Indar 75WSP is compatible
with boron and spray oils; however, the water soluble pouches must be completely dissolved before
adding spray oils or products containing boron to spray mixtures.
Use of Adjuvants
Surfactants may improve spray coverage, especially for waxy leaf surfaces. For best results do not use
penetrants. Use only adjuvants that are registered for agricultural use and are known to be safe for the
crop. Follow directions on the manufacturer's label. When an adjuvant is to be used with this product,
Dow AgroSciences recommends the use of a Chemical Producers and Distributors Association certified
adjuvant. For nonionic surfactants, a spray mix concentration of 0.25% v/v or less generally is sufficient.
For organosilicones, a spray mix concentration of 0.05% v/v or less generally is sufficient. Conduct a
compatibility test (jar test) using the relative proportions of the tank mix ingredients before mixing
ingredients in the spray tank.

A3B / Indar 75WSP / MSTR Amend / 06-08-11 Page 12
Plantback Intervals
Plantback intervals (PBI) for crops without primary label uses (such as rotational crops), where the last
application of the product expended is <0.188 Ib active per acre, the PBI must be 35 days. Where the last
application of the product expended is 0.188 to 1 Ib active per acre, the PBI must be 210 days.
Uses
Almond
Disease
blossom blight
(Monilinia spp.)
Indar 75WSP
oz/100gaf
0.4-0.67
oz/acre
1.25-2
(0.06 - 0.094 Ib
active)
Use Directions
Begin applications at pink
bud stage (about 5%
bloom).
If conditions are favorable
for disease development,
apply again at full bloom
and at petal fall.
Apply aerially in a minimum
of 10 gallons of water per
acre or by ground in a
minimum of 20 gallons of
water per acre.
Restrictions
• Do not make more
than 3 applications or
apply more than a
total of 6 oz of Indar
75WSP (0.28 Ib
active) per acre per
year.
• Preharvest Interval:
Do not apply within
160 days of harvest.
• Minimum Re-
Treatment Interval:
1 0 days
• Do not apply this
product by
chemigation to
almond.
Based upon a standard of 300 gallons of dilute spray per acre or the equivalent amount of product per
acre as a concentrate spray.
Apple
Disease
Indar 75WSP
oz/acre1 Use Directions Restrictions
flyspeck (Zygophiala
jamaicensis)
powdery mildew
(Podosphaera
leucotricha)
rusts
(Gymnosporangium
spp.)
scab (Venturis
ineaqualis)
sooty blotch
(Gloeodes
pomigena)
2 - 2.67
(0.094-0.125 Ib
active)
Begin application at green tip
or when environmental
conditions become favorable
for disease development.
Apply on a 7- to 10-day
schedule through the first
cover spray; thereafter, apply
on a 10- to 14-day schedule.
Apply aerially in a minimum of
10 gallons of water per acre
or by ground in a minimum of
20 gallons of water per acre.
Maintain per acre use rate regardless of spray volume per acre.
Do not make more than 4
applications or apply more
than a total of 10.67 oz of
Indar 75WSP (0.5 Ib active)
per acre per year.
Preharvest Interval: Do not
apply within 14 days of
harvest.
Do not graze livestock in
treated areas or feed cover
crops grown in treated areas
to livestock.
Do not apply this product by
chemigation to apple.

fA3B / Indar 75WSP / MSTR Amend / 06-08-11 Page 13
Blueberry
Disease
Indar 75WSP
oz/acre Use Directions Restrictions
alternaria (Alternaria
spp.)
anthracnose
(Colletotrichum
gloeosporioides)
leaf spot and blotch
(Mycosphaerella spp.,
Septoria spp.)
mummy berry disease
(Monilinia vaccinii-
corymbosi)
phomopsis twig blight
and fruit rot
(Phomopsis vaccinii)
powdery mildew
(Microsphaera
vaccinii)
rusts (Puccianiastrum
spp.)
2-2.67
(0.094-0.125
Ib active)
For mummy berry and
phomopsis twig blight, begin
applications when the plants
break dormancy (at early
green tip or bloom,
depending upon variety), and
make subsequent
applications at intervals of 8
to 14 days.
For control of powdery mildew
and other listed diseases,
begin applications prior to or
at onset of disease
development and repeat at
8- to 14-day intervals.
Apply aerially in a minimum of
10 gallons of water per acre
or by ground in a minimum of
20 gallons of water per acre.
Do not make more than 4
applications or apply more
than a total of 8 oz of Indar
75WSP (0.38 Ib active) per
acre per year.
Preharvest Interval: Do
not apply within 30 days of
harvest.
Do not graze livestock in
treated fields or offer
treated material as a
livestock feed item.
Do not apply this product by
chemigation to blueberry.
Citrus Fruits (Crop Group 10)1
1Citrus fruits (crop group 10) including: calamondin, citrus citron, chironja, citrus hybrids, grapefruit,
kumquat, lemon, lime, orange (sour, sweet, mandarin), pummelo, satsuma mandarin, tangerine, tangelo,
tangor
Apply aerially in a minimum of 10 gallons of water per acre or by ground in a minimum of 20 gallons of
water per acre. Obtain optimum disease control by applying Indar 75WSP with a nonionic surfactant or
spray oil at the manufacturer's specified rate and making thorough coverage applications.
Disease
Indar 75WSP
oz/acre Use Directions Restrictions
greasy spot
(Mycosphaerella
citri)
2.67
(0.125 Ib
active)
Make the first application at the
normal timing for greasy spot
in your area. Make a second
application for control of greasy
spot of foliage and rind blotch
of fruit after the first summer
flush. Application for control of
greasy spot may also occur at
other times.
scab (Elsinoe
fawcettii)
Make the first application
between feather flush and 25%
expansion of spring leaf flush.
Make a second application at
petal fall. Follow 3 to 4 weeks
later with another fungicide for
control of late scab and early
melanose.
Do not make more than 3
applications or apply more
than a total of 8.01 oz of
Indar 75WSP (0.375 Ib
active) per acre per year.
Preharvest Interval: Up to
day of harvest.
Minimum Re-Treatment
Interval: 21 days.
Do not allow livestock to
graze in treated areas.
Do not apply Indar 75WSP
with polymer based spray
adjuvants.
Do not apply this product by
chemigation to citrus.
sooty mold
(Capnodium spp.)
Applications made for control of
greasy spot or scab will also
control sooty mold.

A3B / Indar 75WSP / MSTR Amend / 06-08-11 Page 14
Cranberry
Apply aerially in a minimum of 5 gallons of water per acre or by ground in a minimum of 20 gallons of
water per acre. This product may also be used in a chemigation application to cranberry (see
Chemigation Application section). For optimum disease control, use an agriculturally registered non-
polymer nonionic surfactant at the manufacturer's specified rate.
Disease
Indar 75WSP
oz/acre Use Directions Restrictions
cottonball tip blight
(Monilinia oxycocci)
2-4
(0.094-0.188
Ib active)
Begin applications when
50% of the shoots have
begun to elongate. Refer to
your local spray guides for
more specific application
timing information.
cranberry fruit rot
complex1
Begin applications prior to
bloom at the onset of
disease. Continue on a 10-
to 14-day spray schedule
depending upon local
conditions. Refer to your
local guides for more
specific application
information.
fairyring complex
(suppression)
4
(0.188 Ib
active)
For maximum suppression
of fairyring complex,
measure 10 ft out from the
visible fairyring region and
apply the spray solution of
Indar 75WSP to this entire
area. Make the first
application at bud break and
repeat once, if necessary,
14 days later. Apply Indar
75WSP in 30 to 100 gallons
of water per acre.
To improve the performance
of Indar 75WSP against the
fairyring complex, irrigate
the treated area for 1 to 2
hours following each
application.
Do not make more than 4
applications or apply more
than a total of 16 oz of Indar
75WSP (0.75 Ib active) per
acre per year.
Preharvest Interval: Do not
apply within 30 days of
harvest.
Cranberry fruit rot disease complex may contain one or more of the following fungal pathogens:
Allantophomopsis lycopodina, Botryosphaeria vaccinii, Coleophoma empetri, Diaporthe vaccinii,
Glomerella cingulata-vaccinii, Godronia cassandrae, Phyllosticta vaccinii, Physalospora vaccinii,
Colletotrichum spp. , Phomopsjs vaccinii and Strasseria geniculata.

A3B / Indar 75WSP / MSTR Amend / 06-08-11 Page 15
Peanut
Disease
Indar 75WSP
oz/acre Use Directions Restrictions
early leaf spot
(Cercospora
arachidicola)
late leaf spot
(Cercosporidium
personatum)
1.25-2
(0.062 - 0.094
Ib active)
2 - 2.67
(0.094-0.125
Ib active)
Begin foliar applications
approximately 4 weeks after
planting or at first sign of
disease development and
continue application on a 10-
to 14-day schedule.
Apply aerially in a minimum of
5 gallons of water per acre or
by ground in a minimum of
20 gallons of water per acre.
Do not make more than 4
applications or apply more
than a total of 10.67 oz of
Indar 75WSP (0.5 Ib active)
per acre per year.
Preharvest Interval: Do not
apply within 14 days of
harvest.
Do not feed hay or threshings
or allow livestock to graze in
treated areas.
Do not apply this product by
chemigation to peanut.
Pecan
Disease
Indar 75WSP
oz/acre Use Directions Restrictions
downy spot
(Mycosphaerella
caryigena)
gnomonia leafspot
(Gnomon/a dispora)
leaf blotch
(Mycosphaerella
dendroides)
leaf scorch
powdery mildew
(Micosphaera
penicillata)
scab (Cladosporium
caryigenum)
vein spot (Gnomonia
nerviseda)
2-2.5
(0.09-0:12 Ib
active)
Begin applications at bud
break and continue at 10- to
14-day intervals through
pollination. Apply at 14- to 21-
day intervals through the
cover sprays.
Apply aerially in a minimum of
10 gallons of water per acre
or by ground in a minimum of
20 gallons of water per acre.
Do not make more than 6
applications or apply more than
a total of 16 oz of Indar 75WSP
(0.75 Ib active) per acre per
season.
Preharvest Interval: Do not
apply after shuck split or within
28 days of harvest.
Do not graze livestock in
treated areas or feed cover
crops grown in treated areas to
livestock.
Do not apply after shuck split.
Do not apply this product by
chemigation to pecan.

A3B7 Indar 75WSP / MSTR Amend / 06-08-11 Page 16
Peppers
Including bell pepper, chili pepper, cooking pepper, pimento, sweet pepper
Disease
Indar 75WSP
oz/acre Use Directions Restrictions
cercospora leaf spot
powdery mildew
2-4
(0.094-0.188
Ib active)
Begin applications when
disease is first observed.
Reapply 10 to 14 days later
or as necessary for the level
of disease pressure present.
Apply uniformly in a spray
volume that assures
thorough coverage of the
crop. A minimum spray
volume of 30 gallons per
acre is necessary. Disease
control may be reduced at
low spray volumes or if spray
coverage is inadequate.
For optimal disease control,
apply as a ground
application. Aerial
application is permitted;
however, disease control
may be reduced when
product is applied by air.
For optimum performance, add
a nonionic surfactant to the
solution.
Do not apply more than 4 oz of
Indar 75WSP per acre per
application or more than a total
of 16 oz of Indar 75WSP (0.75
Ib active) per acre per crop.
Do not make more than 2
consecutive applications of
Indar 75WSP. Alternate within
14 days with a product which is
effective on the target
pathogen and has a different
mode of action than Indar
75WSP.
Preharvest Interval: Do not
apply within 7 days of harvest.
Minimum Re-Treatment
Interval: 10 days
Do not apply this product by
chemigation to peppers.

A3B / Indar 75WSP / MSTR Amend / 06-08-11 Page 17
Stone Fruits (Crop Group 12)
1Stone fruit (crop group 12) including apricot, chickasaw plum, damson plum, fresh prune, Japanese
plum, nectarine, peach, plum, plumcot, sweet cherry, tart cherry
Apply aerially in a minimum of 5 gallons of water per acre or by ground in a minimum of 20 gallons of
water per acre. For optimum disease control, add a non-polymer spray adjuvant/wetting agent labeled for
use on food crops to spray solutions at the manufacturers' specified rate.
Crop
apricot
nectarine
peach
sweet cherry
tart cherry
sweet cherry
tart cherry
peach
chickasaw
plum
damson plum
fresh prune
Japanese
plum
plum
plumcot
Disease
blossom blight
(Monilinia spp.)
fruit brown rot
(Monilinia spp.)
leaf spot
(Blumeriella spp.)
scab
(Cladosporium
spp.)
blossom blight
(Monilinia spp.)
fruit brown rot
(Monilinia spp.)
Indar 75WSP
oz/acre
2
(0.094 Ib
active)
Use Directions
Begin applications at
early red bud stage
before infection occurs.
If conditions are
favorable for disease
development, apply
again at full bloom and
at petal fall.
Begin applications 2 to 3
weeks before harvest
using a 7- to 10-day
spray interval.
Follow blossom blight
schedule and continue
application at 10- to 14-
day intervals. Additional
foliar applications may
be made after harvest.
Begin applications at
shuck split. Make 2 to 3
subsequent thorough
coverage applications at
10- to 14-day intervals.
Begin applications at
early red bud stage
before infection occurs.
If conditions are
favorable for disease
development, apply
again at full bloom and
at petal fall.
Begin applications 2 to 3
weeks before harvest
using a 7- to 10-day
spray interval.
Restrictions
• Do not make more than 8
applications or apply
more than a total of 16 oz
of Indar 75WSP (0.75 Ib
active) per acre per
season.
• Preharvest Interval: Up
to day of harvest.
• Do not graze livestock in
treated areas or feed
cover crops grown in
treated areas to
livestock.
• Do not apply this product
by chemigation to stone
fruits.
• Do not make more than 4
applications or apply
more than a total of 8 oz
of Indar 75WSP (0.38 Ib
active) per acre per year.
• Preharvest Interval: Up
to day of harvest.
• Do not graze livestock in
treated areas or feed
cover crops grown in
treated areas to
livestock.
• Do not apply this product
by chemigation to stone
fruits.

A3B / Indar 75WSP / MSTR Amend / 06-08-11 Page 18
Sugarbeets
Disease
cercospora leaf spot
(Cercospora
beticola)
powdery mildew
(Erysiphe spp.)
Indar 75WSP
oz/acre
2.67
(0.125 Ib
active)
Use Directions
Apply Indar 75WSP at
intervals of 14 to 21 days
beginning when conditions
are favorable for disease
development.
For resistance management,
alternate applications of
Indar 75WSP with a non-
triazole fungicide labeled for
use on sugarbeets.
For optimum disease control,
an adjuvant, such as crop oil
concentrate that is labeled
for crop use, may be added
to the spray mixture at the
manufacturer's specified
rate. Add an adjuvant to the
spray solution last.
For best spray coverage of
foliage, apply aerially in a
minimum of 5 to 7 gallons of
water per acre or by ground
in a minimum of 20 gallons
of water per acre.
Restrictions
• Do not make more than 2
applications or apply more
than a total of 5.34 oz of
Indar 75WSP (0.25 Ib active)
per acre per year.
• Preharvest Interval: Do not
apply within 14 days of
harvest.
• Do not apply this product by
chemigation to sugarbeets.
Wheat
Disease
Indar 75WSP
oz/acre Use Directions Restrictions
glume blotch
(Septoria nodorum)
leaf blight, spot
blotch, barley scald
(Rhynchosprium
spp.)
leaf blotch (Septoria
tritici)
powdery mildew
(Erysiphe graminis)
rusts (Puccinia spp.)
tan spot, net blotch
(Pyrenophora spp.)
1.25
(0.06 Ib active)
Apply anytime through
heading (Feekes growth
stage 10.3 to 10.5) on a 7-
to 21-day schedule.
Apply aerially in a minimum
of 5 gallons of water per
acre or by ground in a
minimum of 15 gallons of
water per acre.
Do not make more than 2
applications or apply more
than a total of 2.5 oz of Indar
75WSP (0.12 Ib active) per
acre per year.
Preharvest Interval: Do not
apply after completion of
flowering (Feekes growth
stage 10.5) or within 35 days
of harvest.
Preharvest Interval: Do not
apply within 14 days of
harvest for forage and hay.
Do not apply this product by
chemigation to wheat.
Terms and Conditions of Use
If terms of the following Warranty Disclaimer, Inherent Risks of Use, and Limitation of Remedies are not
acceptable, return unopened package at once to the seller for a full refund of purchase price paid.
Otherwise, use by the buyer or any other user constitutes acceptance of the terms under Warranty
Disclaimer, Inherent Risks of Use and Limitations of Remedies.

rA3B / Indar 75WSP / MSTR Amend 706-08-11 Page 19
Warranty Disclaimer
Dow AgroSciences warrants that this product conforms to the chemical description on the label and is
reasonably fit for the purposes stated on the label when used in strict accordance with the directions,
subject to the inherent risks set forth below. Dow AgroSciences MAKES NO OTHER EXPRESS OR
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY
OTHER EXPRESS OR IMPLIED WARRANTY.
Inherent Risks of Use
It is impossible to eliminate all risks associated with use of this product. Plant injury, lack of performance,
or other unintended consequences may result because of such factors as use of the product contrary to
label instructions (including conditions noted on the label, such as unfavorable temperature, soil
conditions, etc.), abnormal conditions (such as excessive rainfall, drought, tornadoes, hurricanes),
presence of other materials, the manner of application, or other factors, all of which are beyond the control
of Dow AgroSciences or the seller. All such risks shall be assumed by buyer.
Limitation of Remedies
To the extent permitted by law, the exclusive remedy for losses or damages resulting from this product
(including claims based on contract, negligence, strict liability, or other legal theories), shall be limited to,
at Dow AgroSciences' election, one of the following:
1. Refund of purchase price paid by buyer or user for product bought, or
2. Replacement of amount of product used
To the extent permitted by law, Dow AgroSciences shall not be liable for losses or damages resulting from
handling or use of this product unless Dow AgroSciences is promptly notified of such loss or damage in
writing. In no case shall Dow AgroSciences be liable for consequential or incidental damages or losses.
To the extent permitted by law, the terms of the Warranty Disclaimer, Inherent Risks of Use, and
Limitation of Remedies cannot be varied by any written or verbal statements or agreements. No
employee or sales agent of Dow AgroSciences or the seller is authorized to vary or exceed the terms of
the Warranty Disclaimer or this Limitation of Remedies in any manner.
®Trademark of Dow AgroSciences LLC
EPA accepted __/__/_