crop-chem-docs/corpus/epa_ppls/91234-47.md

# A225.05

- EPA Reg No: **91234-47**
- Registrant: ATTICUS, LLC
- Signal word: Caution
- Active ingredients: Azoxystrobin (50%)
- Label accepted: 2020-06-17
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/091234-00047-20200617.pdf

---
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY 
 WASHINGTON, DC 20460 
 
 
 
Notification Label Acceptable v. 20150904 
OFFICE OF CHEMICAL SAFETY 
AND POLLUTION PREVENTION 
June 17, 2020 
 
 
Ms. Kristen Cianni 
Regulatory Specialist 
Atticus, LLC 
5000 CentreGreen Way, Suite 100 
Cary, NC 27513 
 
 
Subject: Notification per PRN 98-10 – update the CONTAINER HANDLING section in 
 the STORAGE AND DISPOSAL BOX 
 Product Name: A225.05 
 EPA Registration Number: 91234-47 
 Application Date: April 17, 2020 
 Decision Number: 563892 
 
Dear Ms. Cianni: 
 
The Agency is in receipt of your Application for Pesticide Notification under Pesticide 
Registration Notice (PRN) 98-10 for the above referenced product. The Registration Division 
(RD) has conducted a review of this request for its applicability under PRN 98-10 and finds that 
the action requested falls within the scope of PRN 98-10. 
 
The label submitted with the application has been stamped “Notification” and will be placed in 
our records. Should you wish to add/retain a reference to the company’s website on your label, 
then please be aware that the website becomes labeling under the Federal Insecticide Fungicide 
and Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, 
the product would be misbranded and unlawful to sell or distribute under FIFRA section 
12(a)(1)(E). 40 CFR 156.10(a)(5) list examples of statements EPA may consider false or 
misleading. In addition, regardless of whether a website is referenced on your product’s label, 
claims made on the website may not substantially differ from those claims approved through the 
registration process. Therefore, should the Agency find or if it is brought to our attention that a 
website contains false or misleading statements or claims substantially differing from the EPA 
approved registration, the website will be referred to the EPA’s Office of Enforcement and 
Compliance. 
 
If you have any questions, you may contact please contact Eleanor Thornton at 703-305-6799 or 
by email at Thornton.eleanor@epa.gov.

Page 2 of 2 
EPA Reg. No. 91234-47 
Decision No. 563892 
 
 
Shaja B. Joyner, Product Manager 20 
Fungicide-Herbicide Branch 
Registration Division 7505P

[Note to reviewer: [Text] in brackets denotes optional or explanatory language] 
[Note to reviewer: {Text} in braces denotes where in the final label text will appear] 
 
 
{BOOKLET FRONT PANEL LANGUAGE} 
GROUP 11 FUNGICIDE 
 
A225.05[™ ] 
[Alternate Brand Name: Artavia 50 WDG] 
Broad-spectrum fungicide for the prevention and control of diseases of turf and ornamentals, and transplants of fruit and 
nut trees, and vegetable and herb plants. 
 
 
Active Ingredient: (% by weight) 
Azoxystrobin: methyl (E)-2-{2-[6-(2-cyanophenoxy) pyrimidin-4-yloxy]phenyl}-3-methoxyacrylate*………………. 50.0% 
Other Ingredients: …………………………………………………………………………………………………………………………………………. 50.0% 
Total …………………………………………………………………………………………………………………………………………………………….. 100.0% 
Contains 0.5 pounds azoxystrobin per pound of product. 
*IUPAC 
 
 
KEEP OUT OF REACH OF CHILDREN 
CAUTION 
 
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do not understand 
the label, find someone to explain it to you in detail.) 
 
See inside label booklet for First Aid, Precautionary Statements and Directions for Use. 
 
 
EPA Reg. No.: 91234-47 
 
EPA Est. No.: 
 
Net Weight: 
 
Manufactured For: 
Atticus, LLC 
5000 CentreGreen Way, Suite 100 
Cary, NC 27513 
 
 
 
 
1 
[A225.05™] is not manufactured, or distributed by Syngenta Crop Protection, LLC, seller of Heritage® 
Fungicide. 
Contains azoxystrobin, the active ingredient used in Heritage® Fungicide.

2 
{LANGUAGE INSIDE BOOKLET} 
 
FIRST AID 
If on skin or 
clothing: 
• Take off contaminated clothing. 
• Rinse skin immediately with plenty of water for 15-20 minutes. 
• Call a poison control center or doctor for treatment advice. 
If in eyes: • Hold eye open and rinse slowly and gently with water for 15-20 minutes. 
• Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. 
• Call a poison control center or doctor for treatment advice. 
HOT LINE NUMBER 
Have the product container or label with you when calling a poison control center or doctor, or going 
for treatment. You may also contact 1-800-424-9300 for emergency medical treatment information. 
 
For Chemical Emergency 
Spill, Leak, Fire, Exposure, or Accident 
Call CHEMTREC Day or Night 
Within USA and Canada: 1-800-424-9300 or +1 703-527-3887 (collect calls accepted) 
 
PRECAUTIONARY STATEMENTS 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
CAUTION 
Harmful if absorbed through skin. Causes moderate eye irritation. Avoid contact with skin, eyes or clothing. Wash 
thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the 
toilet. Remove and wash contaminated clothing before reuse. 
 
PERSONAL PROTECTIVE EQUIPMENT (PPE): 
Applicators and other handlers must wear: 
• Long-sleeved shirt and long pants, 
• Chemical-resistant gloves made of any waterproof material such as polyvinyl chloride (PVC) ≥14 mils, nitrile 
rubber ≥14 mils or butyl rubber ≥14 mils, 
• Shoes plus socks. 
 
User Safety Requirements 
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use 
detergent and hot water. Keep and wash PPE separately from other laundr y. 
 
Engineering Controls 
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the 
Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4- 6)], the handler PPE 
requirements may be reduced or modified as specified in the WPS. 
 
IMPORTANT: When reduced PPE is worn because a closed system is being used, handlers must be provided all PPE 
specified above for “applicators and other handlers” and have such PPE immediately available for use in an 
emergency, such as a spill or equipment breakdown. 
 
USER SAFETY RECOMMENDATIONS 
Users should: 
• Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. 
• Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as 
possible, wash thoroughly and change into clean clothing.

3 
ENVIRONMENTAL HAZARDS: 
This pesticide is toxic to freshwater and estuarine/marine fish and aquatic invertebrates. Azoxystrobin can be persistent 
for several months or longer. Do not apply directly to water, or to areas where surface water is present, or to intertidal 
areas below the mean high -water mark. Drift and runoff may be hazardous to aquatic organisms in neighboring areas. 
Do not contaminate water when disposing of equipment wash water or rinsa te. 
 
Groundwater Advisory 
Azoxystrobin and a degradate of azoxystrobin are known to leach through soil to groundwater under certain conditions 
as a result of label use. This chemical may leach into groundwater if used in areas where soils are permeable, particularly 
where the water table is shallow. 
 
Surface Water Advisory 
This product may impact surface water quality due to run-off of rain water. This is especially true for poorly draining soils 
and soils with shallow groundwater. This product is classifi ed as having a high potential for reaching surface water via 
run-off for several months or more after application. A level, well -maintained vegetative buffer strip between areas to 
which this product is applied and surface water features, such as ponds, st reams and springs, will reduce the potential 
loading of azoxystrobin and a degradate of azoxystrobin from run -off water and sediment. Run -off of this product also 
will be reduced by avoiding applications when rainfall or irrigation is expected to occur wit hin 48 hours. 
Notify state and/or Federal authorities and Atticus immediately if you observe any adverse environmental effects due to 
the use of this product. 
 
PHYSICAL OR CHEMICAL HAZARDS 
Do not use with or store near any oxidizing or reducing agents. Hazardous chemical reaction may occur. 
 
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
 
Failure to follow the Directions For use and Precautions on this label may result in plant injury or poor disease control. 
 
Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only 
protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult 
the State or Tribal agency responsible for pesticide regulation. 
 
AGRICULTURAL USES 
Use A225.05 to prevent and control diseases of: turf produced on sod farms; and ornamentals, fruit and nut trees, and 
vegetable and herb plants grown for transplanting. 
 
 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 
170. This Standard contains requirements for the protection of agricultural workers on farms, forests, 
nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, 
decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions 
pertaining to the statements on this label about personal protective equipment (PPE) and restricted- entry 
interval. The requirements in this box only apply to uses of this product that are covered by the Worker 
Protection Standard. 
 
Do not enter or allow worker entry into treated areas during the restricted -entry interval (REI) of 4 hours. 
 
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that 
involves contact with anything that has been treated, such as plants, soil, or water is: 
• Coveralls, 
• Chemical-resistant gloves made of any waterproof material such as polyvinyl chloride, nitrile rubber 
or butyl rubber, 
• Shoes plus socks.

4 
NON-AGRICULTURAL USES 
Use to prevent and control diseases of turf and ornamentals on golf courses, lawns and landscape areas around 
residential, institutional, public, commercial and industrial buildings, parks, recre ational areas and athletic fields. 
 
PRODUCT INFORMATION 
A225.05 is a broad-spectrum, systemic fungicide that prevents or controls the listed pathogens that cause foliar, stem, 
and root diseases, including leaf and stem blights, leaf spots, patch diseases, mildews, anthracnose, fairy rings, molds, 
and rusts of turfgrass, ornamentals, vegetables and herbs. A225.05 may be applied in alternating application programs 
or in tank mixes with other registered plant protection products. All applications must be made according to the use 
directions that follow. 
 
USE RESTRICTIONS 
• DO NOT apply more than 10 lb A225.05 (5 lb. a.i.) per acre per year to crops grown outdoors. 
• DO NOT apply more than 1.1 lb of A225.05 (0.55 lb a.i.) per acre per application. 
• DO NOT graze or feed clippings from treated turf areas to animals. 
• DO NOT use spray equipment that has been used to apply A225.05 to spray apple, crabapple and flowering 
cherry trees. Even trace amounts can cause unacceptable phytotoxicity. 
• DO NOT apply A225.05 when conditions favor drift beyond the area intended for application. Conditions that 
can contribute to drift include thermal inversion, wind speed and direction, sprayer nozzle and pressure 
combinations, and spray droplet size. Contact your State extension agent for spray drift prevention guidelines in 
your area. 
• DO NOT apply A225.05 where spray drift may reach apple, crabapple or flowering cherry trees. 
• DO NOT apply when weather conditions favor drift from treated areas to a non -target aquatic habitat. 
 
USE PRECAUTIONS 
• A225.05 is highly phytotoxic to apple and certain crabapple and flowering cherry varieties. Use caution to 
prevent injury to these trees. 
• A225.05 has demonstrated some phytotoxic effects when mixed with products that are formulated as EC’s. 
These effects are enhanced if applications are made under cool, cloudy conditions and these conditions remain 
for several days following application. In addition, silicone-containing adjuvants have also contributed to 
phytotoxicity. 
 
Adjuvants: When an adjuvant is to be used with this product, use an adjuvant that meets the standards of the Chemical 
Producers and Distributors Association (CPDA) adjuvant certification program. 
 
Spray Drift Management: Application equipment and weather are the key factors that contribute to spray drift. 
Applications must not be made when equipment or weather conditions may lead to spray drift outside of the intended 
application area. Avoiding spray drift is the responsibility of the applicator. See also specific information in USE 
RESTRICTIONS and USE PRECAUTIONS sections of this label. 
 
Integrated Pest (Disease) Management (IPM): 
Integrate A225.05 into an overall disease and pest management strategy whenever the use of a fungicide is required. 
Cultural practices known to reduce disease development, such as planting of resistant cultivars, removal of plant debris 
to reduce inoculum and water management, must be followed. The following sections in this label identify specific IPM 
recommendations for each crop. Consult your local agricultural, turf and ornamental authorities for additional IPM 
NON-AGRICULTURAL USE REQUIREMENTS 
The requirements in this box apply to uses of this product that are NOT within the scope of the Worker 
Protection Standard for agricultural pesticides (40 CFR part 170). The WPS applies when this product is used to 
produce agricultural plants on farms, forests, nurseries, or greenhous es. The area being treated must be 
vacated by unprotected persons. 
 
Do not treat areas while unprotected humans or domestic animals are present in the treatment areas. Because 
certain states may require more restrictive entry intervals, consult your State Department of Agriculture for 
further information. 
 
Do not allow entry into treatment area until area that was treated is dry.

5 
strategies established for your area. A225.05 may be used in State Agricultural Extension advisory (disease forecasting) 
programs that specify application timing based on environmental factors favorable for disease development. 
 
RESISTANCE MANAGEMENT 
 
 
Some plant pathogens have been shown to develop resistance to fungicide products used repeatedly for their control. 
Apply A225.05 at full label-use rates and in a tank mix or a rotation with other registered fungicides that have a different 
mode of action. As A225.05 is a strobilurin (Group 11) fungicide, DO NOT alternate with other strobilurins, such as 
pyraclostrobin and trifloxystrobin. DO NOT alternate or tank mix A225.05 with fungicides to which resistance has already 
developed. Since pathogens differ in their potential to develop fungicide resistance, use the resistance management 
strategies for each disease given in the specific use directions section in this label. Atticus, LLC encourages responsible 
resistance management to ensure effective long-term control of the fungal diseases on this label. Consult your local or 
state Extension Service for resistance management strategies that are complementary to those in this label. 
 
MIXING INSTRUCTIONS 
To prepare spray solution, partially fill the spray tank with clean water and begin agitation. Add the specified amount of 
A225.05 to the tank, allowing adequate time for good mixing. Add an adjuvant if specified . Finish filling the tank to the 
desired volume to obtain the proper spray concentration. Maintain agitation thr oughout the spraying operation. DO NOT 
allow spray mixture to stand overnight or for prolonged periods. Mix only the amount of spray required for your 
immediate use. Sprayers must be thoroughly cleaned immediately after application. 
 
A225.05 is compatible with commonly used fungicides, liquid fertilizers, herbicides, insecticides and biological control 
products. If tank mixes are desired, add products to the spray tank in the following order: A225.05, other WG or dry 
flowable formulations, wettable powders and flowable (aqueous suspensions) products. Observe all direc tions, 
precautions, and limitations on labeling of all products used. Consult compatibility charts or your local or state 
agricultural or turf authorities for compatibility information. 
 
It is the pesticide user's responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must 
follow the most restrictive directions for use and precautionary statements of each product in the tank mixture. 
 
DO NOT mix A225.05 in the spray tank with pesticides, surfactants or fertilizers unless compatibility charts or your own 
prior use has shown that the combination is physically compatible, effective and non- injurious under your conditions of 
use. If physical compatibility is unknown, the following procedure must be followed: Pour the specified proportions of 
the products into a suitable container of water, mix thoroughly and allow it to stand at least 20 minutes. If the 
combination remains mixed or can be re-mixed readily, the mixture is considered physically compatible. 
 
A225.05 is incompatible with many fertilizers when low water volumes are used for in -furrow applications. Cold 
temperatures and water quality exacerbate these compatibility problems. Conduct a physical compat ibility test as 
described in the paragraph as above before making a field application. 
 
NOTE: A225.05 has demonstrated some phytotoxic effects when mixed with products that are formulated as EC’s. These 
effects are enhanced if applications are made under cool, cloudy conditions and these conditions remain for several days 
following application. In addition, silicone-containing adjuvants have also contributed to phytotoxicity. 
 
APPLICATION INSTRUCTIONS 
Apply A225.05 prior to disease development at the rates and timings given in this label. Apply at the higher rates in the 
rate range and/or shorter spray intervals under conditions of heavy infection pressure, on highly susceptible varieties or 
when environmental conditions are conducive for disease development. Use of A225.05 as a "rescue" (late curative or 
eradicant) treatment may not give satisfactory disease control. 
 
A225.05 may be applied with various types of spray equipment commonly used for making ground and aerial 
applications. For ground applications, apply A225.05 in a volume of water sufficient to provide good plant canopy 
penetration. For aerial applications, apply A225.05 in a minimum of two gallons of water per acre. Ground application is 
preferred as it typically provides better canopy penetration and coverage. 
 
Proper adjustments and calibration of spraying equipment are essential for optimal disease control. If you have 
GROUP 11 FUNGICIDE

6 
questions about calibration, contact a State Extension Service specialist, the equipment manufacturer or other experts. 
 
Directions for Use through Sprinkler and Drip Chemigation Systems 
Spray Preparation: Chemical tank and injector system must be thoroughly cleaned. Flush system with clean water. 
 
Use Precautions for Sprinkler and Drip Irrigation Applications: 
Drip and Micro Irrigation: A225.05 may be applied through drip and micro irrigation systems to potted ornamentals or 
to bedded, field-grown ornamentals for soil- borne disease control. The soil or potting media must have adequate 
moisture capacity prior to drip application. 
Terminate drip irrigation at fungicide depletion from the main feed supply tank or after 6 hours from start, whichever is 
shorter. For maximum efficacy, delay subsequent irrigation (water only) for at least for 24 hours following drip 
application. 
 
Sprinkler Irrigation: Apply this product through sprinkler irrigation systems including center pivot, motorized boom, 
lateral move, end tow, side [wheel] roll, traveler, big gun, solid set, or hand move irrigation systems. Do not apply this 
product through any other type of irrigation system except as specified on this label. 
 
Apply with center-pivot or continuous-move equipment distributing ½ acre-inch or less during treatment. In general, use 
the least amount of water required for proper distribution and coverage. If stationary systems (solid set, handlines or 
wheel lines other than continuous-move) are used, inject this product into no more than the last 20-30 minutes of the 
set. DO NOT apply when winds are greater than 10- 15 mph to avoid drift or wind skips. Plant injury, lack of 
effectiveness, or illegal pesticide residues in the crop can result from non -uniform treated water. Thorough coverage of 
foliage is required for good control. Good agitation must be maintained during the entire application period. 
 
If you have questions about calibration, contact the State Extension Service specialist, equipment manufacturers or other 
experts. 
 
• The system must contain a functional check valve, vacuum relief valve, and low pressure drain appropriately 
located on the irrigation pipeline to prevent water- source contamination from backflow. 
• The pesticide injection pipeline must contain a functional, automatic, quick - closing check valve to prevent the 
flow of fluid back toward the injection pump. 
• The pesticide injection pipeline must also contain a functional, normally closed, solenoid -operated valve 
located on the intake side of the injection pump and connected to the system interlock to prevent fluid from 
being withdrawn from the supply tank when the irrigation system is either automatically or manually shut 
down. 
• The system must contain functional interlocking controls to automatically shut off the pesticide injection pump 
when the water pump motor stops. 
• The irrigation line or water pump must include a functional pressure switch which will stop the water pump 
motor when the water pressure decreases to the point where pesticide distribution is adversely affected. 
• Systems must use a metering pump, such as a positive displacement injection pum p (e.g., diaphragm pump) 
effectively designed and constructed of materials that are compatible with pesticides and capable of being 
fitted with a system interlock. 
 
Allow sufficient time for pesticide to be flushed through all lines and all nozzles before turning off irrigation water. A 
person knowledgeable of the chemigation system and responsible for its operation, or under the supervision of the 
responsible person, shall shut the system down and make necessary adjustments should the need arise. 
 
DO NOT connect an irrigation system (including greenhouse systems) used for pesticide application to a public water 
system unless the pesticide label-prescribed safety devices for public water systems are in place. 
 
Specific Instructions for Public Water Systems 
1. Public water system means a system for the provision to the public of piped water for human consumption if 
such system has at least 15 service connections or regularly serves an average of at least 25 individuals daily at 
least 60 days out of the year. 
2. Chemigation systems connected to public water systems must contain a functional, reduced- pressure zone, back-
flow preventer (RPZ) or the functional equivalent in the water supply line upstream from the point of pesticide 
introduction. As an option to the RPZ, discharge the water from the public water system into a reservoir tank

7 
prior to pesticide introduction. There must be a complete physical break (air gap) between the outlet end of the 
fill pipe and the top or overflow rim of the reservoir tank of at least twice the inside diameter of the fill pipe. 
 
3. The pesticide injection pipeline must contain a functional, automatic, quick -closing check valve to prevent the 
flow of fluid back toward the injection pump. 
4. The pesticide injection pipeline must contain a functional, normally closed, solenoid -operated valve located on 
the intake side of the injection pump and connected to the system interlock to prevent fluid from being 
withdrawn from the supply tank when the irrigation system is either automatically or manually shut down. 
5. The system must contain functional interlocking controls to automatically shut off the pesticide injection pump 
when the water pump motor stops, or in cases where there is no water pump, when the water pressure 
decreases to the point where pesticide distribution is adversely affected. 
6. Systems must use a metering pump, such as a positive displacement injection pump (e.g., diaphragm pump) 
effectively designed and constructed of materials that are compatible with pesticides and capable of being fitted 
with a system interlock. 
7. Do not apply when wind speed favors drift beyond the area intended for treatment. 
 
DIRECTIONS FOR TURF 
A225.05 controls the listed pathogens that cause foliar, stem, and root diseases, including leaf and stem blights, leaf 
spots, patch diseases, mildew, molds and rusts of turfgrass. A225.05 may be used on golf courses, lawns and landscape 
areas around residential, institutional, public, commercial and industrial buildings, parks, recreational areas, athletic 
fields and sod farms. 
 
Integrated Pest (Disease) Management (IPM) 
Sound turf management resulting in healthy, vigorous turf is the foundation of a good IPM program. Cul tural practices, 
such as proper choice of turf variety, nutrient management, proper cutting height, thatch management, and proper 
watering, drainage, and moisture stress management, must be integrated with the use of fungicides to increase turf 
vigor and reduce the susceptibility to disease. Immunoassay detection kits and extension service diagnostic services can 
assist in the early and accurate identification of causal organisms and corresponding selection of the proper fungicide 
when required. 
 
Application Directions: 
Apply A225.05 prior to disease development. Mix A225.05 with the required amount of water and apply as a dilute spray 
in 2-4 gallons of water per 1,000 square feet (87-174 gallons per acre). Repeat applications at specified intervals. For 
spot treatments, use 0.2 oz of A225.05 per 1-2 gallons of water. 
 
Soil Injection Application: 
A225.05 may be applied through a liquid fungicide injector for the control of ectrotrophic root diseases such as summer 
patch and take-all patch. Use A225.05 only in liquid injection equipment specifically designated for pesticide use. 
 
Apply A225.05 at 0.2 to 0.4 oz per 1,000 sq ft. Spray carrier volume must fall within 30-150 gallons of water per 1,000 sq 
ft. Space injection hole 1 inch by 1 inch for optimum control. Do not exceed injection depth of 2 inches. 
 
One-inch depth is required for optimum results. Application timing must follow disease control strategies used for 
normal broadcast spray programs. 
 
Application when Establishing Turfgrass from Seed or in Overseeding of Dormant Turfgrass : 
A225.05 may be used for control of certain turfgrass diseases associated with turfgrass establishment from seed or 
during overseeding of dormant turfgrass. A225.05 may be safely applied before or after seeding or at seedling 
germination and emergence to ryegrass, bentgrass, bluegrass (including Poa trivialis ), and fescue turfgrass types. 
Optimum application timing is during seeding. See Application Directions section. 
 
Dollar Spot: A225.05 does not control Dollar Spot. During periods of Dollar Spot pressure, always mix A225.05 with 
chlorothalonil, propiconazole, fluazinam or other Dollar Spot control fungicide. A225.05 is compatible in tank mixes with 
many other fungicides that control Dollar Spot. Follow directions under MIXING INSTRUCTIONS above.

8 
TURF USE RESTRICTIONS: 
• DO NOT apply more than 10 lb A225.05 (5 lb. a.i.) per acre per year. 
• DO NOT make more than 9 applications of A225.05 per year. 
• Resistance Management: DO NOT spray more than two sequential A225.05 applications for Gray Leaf Spot or 
Pythium spp. control. For all other diseases when Gray Leaf Spot and Pythium spp. are not present, DO NOT 
spray more than three sequential applications of A225.05. 
• DO NOT apply to golf course turf by air. 
 
Table 1: Directions for Application for Turf Diseases 
 
 
Target Diseases 
Use Rate (oz 
product/ 1,000 
sq ft) 
Application 
Interval (days) 
 
 
Application Instructions 
Anthracnose 
(Colletotrichum cereale) 
0.2-0.4 14-28 Use preventatively. Begin applications when 
conditions are favorable for disease infection, 
prior to disease symptom development. 
Bermudagrass Decline 
(Gaeumannomyces graminis 
0.4 28 Use preventatively. Begin applications when 
conditions are favorable for disease infection prior 
to disease symptom development. 
Brown Patch 
(Rhizoctonia solani) 
0.2-0.4 14-28 Apply when conditions are favorable for disease 
development. 
Brown Ring Patch 
(Waitea circinata) 
0.2-0.4 14-28 Apply when conditions are favorable for disease 
development 
Cool Weather Brown Patch 
Yellow Patch 
(Rhizoctonia cerealis) 
0.2-0.4 14-28 Make one or two applications in fall or when 
conditions are favorable for disease development. 
Fairy Ring 
(Lycoperdon spp., Agrocybe 
pediades, 
Arachnion spp., Bovista 
spp., andVascellum spp.) 
0.4 28 Apply preventatively or as soon as possible after 
fairy ring symptoms develop. Add the specified 
rate of a wetting agent to the final spray and 
water in immediately with 1/8 to 1/4 inches of 
irrigation. Fairy ring symptoms may take 2 to 3 
weeks to disappear following curative application. 
Reapplication after 28 days may be required in 
some cases. Severely damaged or thin turf may 
require reseeding. 
Fusarium Patch 
(Microdochium nivale) 
0.2-0.4 14-28 Use preventatively. Begin applications when 
conditions are favorable for disease infection, 
prior to disease symptom development. 
Gray Leaf Spot* 
(Pyricularia grisea) 
0.2-0.4 14-28 Begin applications before disease is present and 
continue applications while conditions are 
favorable for disease development. 
Gray Snow Mold Typhula 
blight (Typhula incarnata, T. 
ishikariensis) 
0.4 10-28 Make two applications of 0.4 oz spaced 10-28 days 
apart in late fall just before snow cover. Tank 
mixing with another snow mold fungicide, such as 
chlorothalonil, may enhance control under severe 
disease pressure. 
Leaf and Sheath Spot 
(Rhizoctonia zeae) 
0.4 14-28 Apply when disease conditions are favorable for 
disease development. 
Leaf Rust, Stem Rust, 
Stripe Rust 
(Puccinia spp.) 
0.2-0.4 14 to 28 Begin applications when conditions are favorable 
for disease infection, prior to disease symptom 
development. 
Leaf Spot 
(Bipolaris spp.) 
0.2-0.4 14-21 Apply when conditions are favorable for disease 
development. 
Melting Out 
(Drechslera poae ) 
0.2-0.4 14-21 Apply when conditions are favorable for disease 
development.

9 
 
 
Necrotic Ring Spot 
(Leptosphaeria korrae) 
0.2-0.4 14-28 Apply when conditions are favorable for disease 
development. 
Pink Patch (Limonomyses 
roseipellis) 
0.2-0.4 14-28 Apply when conditions are favorable for disease 
development. 
Pink Snow Mold 
(Microdochium nivale) 
0.4 10-28 Make two applications of 0.4 oz spaced 10-28 days 
apart in late fall just before snow cover. Tank mixing 
with another snow mold fungicide, including 
chlorothalonil, may enhance control under severe 
disease pressure. 
Powdery Mildew 
(Erysiphe graminis) 
0.2-0.4 14-28 Begin applications when conditions are favorable 
for disease infection, prior to disease symptom 
development. 
Pythium Blight Pythium Root 
Rot* 
(Pythium aphanidermatum, 
Pythium spp.) 
0.2-0.4 10-14 Use preventatively. Begin applications before 
disease is present. During periods of prolonged 
favorable conditions, treat on the 10-day 
application interval. For use on newly seeded as well 
as established turf. 
Pythium Root Dysfunction* 
(Pythium volutum) 
0.4 21-28 Apply preventatively when mean daily soil 
temperatures are between 55 F and 70 F. Irrigate 
with 0.1 to 0.2 inches within 24 hours after 
application to facilitate movement into the root 
zone. 
Red Thread 
(Laetisaria fuciformis) 
0.2-0.4 14-28 Apply when conditions are favorable for disease 
development. 
Rhizoctonia Large Patch 
(Rhizoctonia solani) 
0.2-0.4 14-28 Make one or two applications in fall or when 
conditions are favorable for disease development. 
Spring applications may also be required in some 
locations or when disease pressure is high. 
Southern Blight 
(Sclerotium rolfsii) 
0.2-0.4 14-28 Apply when conditions are favorable for disease 
development. 
Summer Patch (Magnaporthe 
poae) 
0.2-0.4 14-28 Apply when conditions are favorable for disease 
development. 
Take-all patch 
(Gaeumannomyces graminis) 
0.2-0.4 28 Begin applications when conditions are favorable for 
disease infection, prior to disease symptom 
development. Make two applications 28 days apart 
in the spring and two applications 28 days apart in 
the fall. 
Zoysia Patch 
(Rhizoctonia solani, 
Gaeumannomyces incrustans) 
0.2-0.4 14-28 Apply 1 or 2 applications approximately one month 
prior to zoyia grass dormancy. 
Reapply 14 to 28 days later. 
*DO NOT apply more than two sequential applications of A225.05 for control of Gray Leaf Spot and Pythium spp. For 
all other diseases when Gray Leaf Spot and Pythium spp. are not present, do not apply more than three sequential 
applications of A225.05. 
 
Table 2: A225.05 Rate Conversion Chart for Turf 
Oz Product/ 1,000 sq ft Oz AI/ 1,000 sq ft Oz Product/ Acre Pound Product/ Acre 
0.20 0.10 8.7 0.5 
0.30 0.15 13.1 0.8 
0.40 0.20 17.4 1.1 
 
Table 3: Amount of A225.05 to Mix 100 Gallons for Turf Applications 
A225.05 Use Rate Spray Volume (gallons/1,000 sq ft)

10 
2.0 gallons 3.0 gallons 4.0 gallons 
0.20 oz 10 oz 6.7 oz 5 oz 
0.40 oz 20 oz 13.3 oz 10 oz 
 
DIRECTIONS FOR ORNAMENTALS 
A225.05 is registered for control of listed pathogens that cause foliar, aerial, and root diseases, including: leaf, tip, and 
flower blights; leaf spots; downy mildew; powdery mildew; anthracnose; and rusts of ornamental plants. A225.05 may 
be used to control certain diseases of container, bench, flat, plug, bed or field-grown ornamentals in greenhouses, shade 
and lath houses, outdoor nurseries, retail nurseries, interiorscapes and other landscape areas. 
 
Integrated Pest (Disease) Management (IPM): 
Integrate A225.05 into an overall disease management strategy that includes selection of varieties with disease 
tolerance, optimum plant populations, proper fertilization, winter and/or spring pruning, plant debris management and 
proper timing and placement of irrigation. Immunoassay detection kits and diagnostic services can assist in the early and 
accurate identification of causal organisms and corresponding selection of the proper fungicide when required. 
 
Application Directions: 
Apply A225.05 as a foliar or soil broadcast, drench, or banded spray targeted at the foliage or crown of the plant. Apply 
to the point of runoff to ensure complete coverage of the target plant. Good coverage and wetting of foliage is 
necessary for best control. Refer to the label for specific use directions for control of certain diseases. Repeat 
applications at specified intervals using an appropriate resistance management program. 
 
Apply A225.05 at listed use rates. The addition of an adjuvant at the specified use rate may enhance coverage on hard-
to-wet plant foliage. Under light to moderate disease pressure, use the lower listed rates and shorter listed application 
interval. Under environmental conditions conducive to severe disease development, use the higher rates and shorter 
listed application interval. Use of A225.05 as a "rescue" (late curative or eradicant) treatment may not result in 
satisfactory disease control. 
 
Drench Application: 
A225.05 may be applied to control soilborne, seedling, and crown diseases of ornamentals as a preventative drench 
treatment prior to infection. Good coverage of the pre-infection area (root zone, root ball, and crown) is necessary for 
satisfactory control. A225.05 may be applied by drench to container-grown ornamentals. 
 
Make a drench application prior to infection as healthy roots are necessary to optimize product uptake and systemic 
translocation to optimize disease protection. Due to the systemic activity of A2 25.05, suppression of certain foliar 
diseases has been observed in plants treated with drench applications. 
 
Chemigation: Use through Sprinkler and Drip Irrigation Systems: 
A225.05 may be applied through sprinkler, drip or other micro irrigation systems to potted ornamentals or to bedded, 
field-grown ornamentals for soil-borne disease control. Apply A225.05 as a preventative treatment. The soil or potting 
media must have adequate moisture capacity prior to drip application. 
 
Terminate irrigation at fungicide depletion from the main feed supply tank or after 6 hours from start, whichever is 
shorter. For maximum efficacy, subsequent irrigation (water only) must be delayed for at least for 24 hours following 
application. 
 
ORNAMENTAL USE RESTRICTIONS: 
• DO NOT apply more than 10 lb A225.05 (5 lb. a.i.) per acre per year. 
• DO NOT make more than 8 applications of A225.05 per year. 
• DO NOT exceed 600 gallons spray volume per acre for foliar applications. 
• DO NOT apply greater than 2 pints of solution per square foot for drench and crown applications. 
• DO NOT tank-mix A225.05 with other fungicides, insecticides, herbicides, fertilizers, or adjuvants unless local 
experience indicates that the tank mix will not injure ornamental plants. 
• Resistance Management: DO NOT make more than three (3) sequential applications of A225.05 before 
alternating with a fungicide of a different mode of action. A sound resistance management program would 
include blocks of three A225.05 applications separated by blocks of two alternate fungicide applications. 
• DO NOT alternate A225.05 with other strobilurin fungicides.

11 
• DO NOT apply A225.05 to crabapple or cherry trees (including flowering and ornamental varieties, including 
Yoshino) due to possible phytotoxicity. 
• DO NOT use spray equipment that has applied A225.05 for use in these sensitive crops due to possible 
phytotoxicity from residue remaining in the sprayer. 
 
ORNAMENTAL USE PRECAUTIONS: 
• Application of A225.05 to crabapple may cause phytotoxicity. A225.05 may be applied to specific non-sensitive 
varieties of crabapple. A225.05 has been shown to be safer when applied to the species and varieties listed in 
Table 12. Due to the large number of species, and varieties of crabapple, it is impossible to test every one for 
tolerance to A225.05. Conduct small-scale testing to ensure plant safety prior to large-scale commercial use on 
plant species and varieties not listed on this label. 
• Use caution before applying A225.05 as a drench to small bedding plants in the seedling/plug stage due to 
possible phytotoxicity. Test a limited quantity of plants prior to full-scale application. 
 
When used in accordance with the label directions, A225.05 will provide control of the diseases of ornamental plants in 
the following table. 
 
Table 4: Foliar Plant Diseases Controlled 
(A225.05 is sold in several product container sizes. For product contain er sizes of 8 oz and larger, follow the mixing 
instructions in the second column. For the 4 oz product container size, follow the mixing instructions in the third column 
in the following table.) 
 
DISEASE (Pathogen) 
Mixing Instructions and Use Rates 
8 oz and larger product container sizes 
(oz product per 100 gallons) 
4 oz product container size (oz product 
per 50 gallons) 
CONIFER BLIGHTS 
Phomopsis Blight 
(Phomopsis juniperovora) 
Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 days. 
Tip Blight 
(Sirococcus strobilinus) 
Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 days. 
LEAF BLIGHTS/LEAF SPOTS 
Alternaria Leaf Spot 
(Alternaria spp.) 
Apply 1-8 oz every 7-28 days. Apply 0.5-4 oz every 7-28 days. 
Anthracnose 
(Colletotrichum spp., Elsinoe spp.) 
Apply 1-8 oz every 7-28 days. Apply 0.5-4 oz every 7-28 days. 
Cercospora Leaf Spot 
(Cersospora spp.) 
Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 days. 
Cylindrocladium leaf spot/stem 
canker 
(Cylindrocladium spp.) 
Apply 4-8 oz every 7-14 days. Apply 2-4 oz every 7-14 days. 
Downy Mildew 
(including Peronospora spp., 
Plasmopara spp., Bremiella spp., 
Bremia spp.) 
Apply 2-4 oz every 7-21 days during 
periods of active plant growth and 
prior to dormancy or severe infection. 
Use lower use rates for herbaceous 
seedlings 
Apply 1-2 oz every 7-21 days during 
periods of active plant growth and prior 
to dormancy or severe infection. 
Entomosporium Leaf Spot 
(Entomosporium spp.) 
Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 days. 
Iris Leaf Spot 
(Mycosphaerella spp.) 
Apply 2-4 oz every 7-21 days. Apply 1-2 oz every 7-21 days. 
Leaf spot 
(Cladosporium spp.) 
Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 days.

12 
DISEASE (Pathogen) 
Mixing Instructions and Use Rates 
8 oz and larger product container sizes 
(oz product per 100 gallons) 
4 oz product container size (oz product 
per 50 gallons) 
Rose Blackspot 
(Diplocarpon rosea) 
Apply 4-8 oz every 7-14 days. Under 
severe disease conditions or if 
disease is already present, apply 
A225.05 at the highest listed rate 
and shortest application interval. 
A225.05 may be tank-mixed with 
another rose blackspot fungicide. Do 
not exceed 24 oz/A per application. 
Apply 2-4 oz every 7-14 days. Under 
severe disease conditions or if 
disease is already present, apply 
A225.05 at the highest listed rate 
and shortest application interval. 
A225.05 may be tank-mixed with 
another rose blackspot fungicide. Do 
not exceed 24 oz/A per application. 
Myrothecium leaf spot 
(Myrothecium spp.) 
Apply 2-4 oz every 7-21 days. Apply 1-2 oz every 7-21 days. 
Scab Apply 1-4 oz every 10-28 days. Do not 
apply to apple trees. For crabapples, 
see Table 12 for non-sensitive varieties. 
Apply 0.5-2 oz every 10-28 days. Do 
not apply to apple trees. For 
crabapples, see Table 12 for non-
sensitive varieties. 
(Venturia inaequalis, 
Sphaceloma poinsettiae, 
Elsinöe australis) 
Marssonina Leaf Spot 
(Marssonina spp.) 
Apply 1-4 oz every 14-28 days. Apply 0.5-2 oz every 14-28 days. 
POWDERY MILDEW 
Erysiphe spp., Microsphaera spp., 
Sphaerotheca spp., Oidium spp., 
Podosphaera spp., Uncinula spp. 
Apply 1-4 oz every 7-28 days. Do not 
make more than 2 sequential 
applications before rotating to another 
class of fungicide. 
Apply 0.5-2 oz every 7-28 days. Do not 
make more than 2 sequential 
applications before rotating to another 
class of fungicide. 
RUSTS 
Needle Rust 
(Melampsora occidentalis) 
Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 days. 
Other Rusts Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 
days. (Phragmidium spp., Puccinia spp., 
Gymnosporagium spp., Coleosporium 
spp., Uromyces spp.) 
FLOWER BLIGHTS 
Anthracnose 
(Collectotrichum spp., Elsinoe spp.) 
Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 days. 
Botrytis Blight 
(Botrytis cinerea) 
Apply 4-8 oz every 7-21 days. For 
suppression only. Do not exceed 24 
oz/acre. 
Apply 2-4 oz every 7-21 days. For 
suppression only. Do not exceed 24 
oz/acre. 
SHOOT/STEM DISEASES 
Aerial/Shoot Blight 
(Phytophthora spp.) 
Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 days. 
 
Table 5: Soilborne Diseases Controlled – Directed Spray 
 
Pathogen 
Mixing Instructions and Use Rates 
8 oz and larger product container sizes 
(oz product per 100 gallons) 
4 oz product container size (oz product 
per 50 gallons) 
Fusarium spp., Rhizoctonia solani, 
Sclerotium rolfsii, Sclerotinia spp. 
Apply 1-4 oz every 7-21 days. Apply 0.5-2 oz every 7-21 days.

13 
Table 6: Soilborne Diseases Controlled – Drench and Drip Irrigation 
See Drench Application section of ORNAMENTAL DIRECTIONS FOR USE for additional drench directions. 
 
Pathogen Use Rate 
(oz product/100 gallons) Application Instructions 
Fusarium spp. 
Rhizoctonia solani 
Sclerotium rolfsii 
0.2-1.0 oz Apply 1-2 pints of the solution per 
square foot surface area every 7-28 
days. 
Sclerotinia spp. 1.0 oz Apply 1-2 pints of the solution per 
square foot surface area every 7-28 
days. Apply for control of Sclerotinia by 
drench application only. 
 
Table 7. Soilborne Diseases Controlled – Banded Applications 
 
Pathogen Use Rate 
(oz product/1,000 row feet) Application Instructions 
Fusarium spp. 
Rhizoctonia solani 
Sclerotium rolfsii 
Sclerotinia spp. 
0.2-0.41 oz Apply as a banded spray, 7 inches or 
less in width, directed to the soil using 
single or multiple spray nozzles 
adjusted to provide thorough coverage 
of lower stems2 and the soil surface. 
1When applications are applied to crops grown using 22 -inch row spacing, the maximum application rate is 0.35 oz/1,000 
row feet. 
2Applications that come into contact with the foliage are considered foliar applications for resistance management. 
 
Table 8. Soilborne Diseases Controlled – In-furrow Application 
 
Pathogen Use Rate 
(oz product/1,000 row feet) Application Instructions 
Fusarium spp. 
Rhizoctonia solani 
Sclerotium rolfsii 
0.2-0.3 oz1 Mount the spray nozzle to allow the 
spray mixture to be applied directly 
into the furrow and before the 
propagated unit (seed, seed pieces, 
bulbs or corms) are covered by soil. 
Apply the higher listed rate when 
current or expected weather conditions 
are conducive for disease 
development. 
Suppression Only: 
Pythium spp. 
1Apply product in 3 to 15 gallons of water per 1,000 row feet. 
 
Table 9: Soilborne Diseases Controlled – Broadcast Application 
 
Pathogen Use Rate 
(oz product/A) Application Instructions 
Fusarium spp. 2-16 oz Apply as a preventative broadcast 
Rhizoctonia solani application. Soil or potting media 
Sclerotium rolfsii must have adequate moisture 
Sclerotinia spp. capacity prior to application if 
 applied by overhead irrigation.

14 
Table 10: Foliar and Soil Diseases Suppressed – Drench and Drip Applications 
 
Disease/Pathogen Use Rate 
(oz product/100 gallons) Application Instructions 
Rusts 
Powdery Mildew 
Pythium spp. 
0.45-1.0 oz Apply 1-2 pints of the solution per 
square foot surface area every 7- 28 
days. 
 
Plant Safety 
A225.05 has been shown to be safe when applied to the ornamental plants listed in Tables 11 and 12 when applied 
according to listed application methods, rates, and timings. Due to the large number of species and varieties of 
ornamental and nursery plants, it is impossible to test every one for tolerance to A225.05. Neither the manufacturer nor 
the seller has determined whether or not A225.05 can be used safely on ornamental and nursery plants not specified on 
this label. Conduct small-scale testing to ensure plant safety prior to large- scale commercial for such varieties. 
 
Table 11: Non-Sensitive Plants Listed by Common Name: 
COMMON NAME BOTANICAL NAME 
Abelia Abelia spp. 
Andromeda, Japanese Pieris japonica 
Arborvitae Thujopsis spp. 
Aspen Trees Populus spp. 
Aster Aster spp. 
Aucuba, Japanese Aucuba japonica 
Azalea, Glacier Rhododendron spp. 
Azaleas Rhododendron spp. 
Balsam Impatiens spp. 
Barberry Berberis thunbergii 
Begonia (except Rieger begonia) Begonia spp. 
Birch, River Betula nigra 
Black-Eyed Susan Rudbeckia hirta 
Blanket Flower Gaillardia spp. 
Bougainvillea Bougainvillea spp. 
Boxwood Buxus sempervirens 
Buddleia Buddleia davidii 
Bugle Ajuga reptans 
Bugleweed Ajuga reptans 
Burning Bush Euonymus alatus 
Butterfly Bush Buddleia davidii 
Cactus, Holiday Schlumbergera 
Caladium Caladium spp. 
Camellia Camellia japonica 
Carnation Dianthus caryophyllus 
Ceanothus Ceanothus spp. 
Cedar, Atlas Cedrus atlantica 
Cedar, Red Juniperus virginiana 
Cedar, Western Red Thuja plicata 
Cedar, White Cedrus spp. 
Christmas Trees See Fir, Douglas; Fir, Fraser; and Pine, Scotch 
Chrysanthemum Chrysanthemum spp.

15 
COMMON NAME BOTANICAL NAME 
Cinquefoil Potentilla spp. 
Clethra Clethra alnifolia 
Coleus Plectranthus spp. 
Cotoneaster, Creeping Cotoneaster adpressus 
Cotoneaster, Variegated Rockspray Cotoneaster horizontalis 
Crabapple (See Table 12 for variety list) Malus spp. 
Cranesbill Geranium spp. 
Crapemyrtle Lagerstroemia indica 
Cyclamen Cyclamen spp. 
Cyperus Cyperus spp. 
Cypress, Sawara Chamaecyparis pisifera 
Cypress, Leyland Chamaecyparis spp. 
Daisy, Gerber Gerbera jamesonii 
Daisy, Transvaal Gerbera jamesonii 
Dogwood Cornus spp. 
Dogwood Cornus florida 
Dogwood, Pink Cornus spp. 
Dumb-Cane Dieffenbachia spp. 
Euonymus, Dwarf Winged Euonymus alata 
Euonymus, Evergreen Euonymus japonicus 
Evergreen, Chinese Aglaonema spp. 
Fatsia, Japanese Fatsia japonica 
Fig Ficus spp. 
Fir, Douglas Pseudotsuga spp. 
Fir, Fraser Abies fraseri 
Fir, Noble Abies procera 
Floss Flower Ageratum spp. 
Forsythia Forsythia viridissima 
Foxglove Digitalis spp. 
Gardenia Gardenia jasminoides 
Geranium Pelargonium spp. 
Grass Pennisetum alopecuroides 
Grass, Dwarf Pampas Phalaris spp. 
Grass, Pampas Cortaderia selloana 
Hawthorn, Indian Rhaphiolepsis indica 
Heather Erica dareyensis 
Hemlock Tsuga spp. 
Hemlock, Western Tsuga heterophylla 
Hibiscus Hibiscus moscheutos 
Hibiscus Hibiscus rosa-sinensis 
Holly Ilex spp. 
Hosta Hosta spp. 
House Leek Sempervivum spp. 
Hydrangea Hydrangea spp. 
Hydrangea, French Hydrangea macrophylla

16 
COMMON NAME BOTANICAL NAME 
Impatiens1,2 Impatiens spp. 1,2 
Iris (Bulbous, Spanish, Dutch) Iris xiphium 
Iris, African Dietes iridiodes 
Iris, Butterfly Dietes iridiodes 
Ivy, Algerian Hedera algeriensis 
Ivy, English Hedera helix 
Ivy, Swedish Plectranthus spp. 
Japanese Pittosporum Pittosporum tobira 
Juniper Juniperus procumbens 
Juniper Juniperus scopulorum 
Juniper Juniperus spp. 
Larkspur Delphinium spp. 
Laurel Laurus nobilis 
Laurel, Australian Pittosporum spp. 
Laurel, Japanese Aucuba japonica 
Lilac, California Ceanothus spp. 
Lilac, Wild Ceanothus sanguineus 
Lily, Asiatic Lilium spp. 
Lily, Peace Spathiphyllum floribundium 
Lily-Turf Liriope muscari 
Live-Forever Sempervivum spp. 
Magnolia Magnolia spp. 
Magnolia, Saucer Magnolia soulangiana 
Magnolia, Southern Magnolia grandiflora 
Maple, Japanese Acer palmatum 
Maple, Sugar Acer saccharum 
Marigold Tagetes spp. 
Mugwort Artemisia spp. 
Nandina Nandina domestica 
Oak, Pin Quercus palustris 
Oak, Red Quercus falcata 
Oleander Nerium oleander 
Orpine Sedum spp. 
Palm, Date Phoenix dactylifera 
Palm, Parlor Chamaedora elegans 
Palm, Queen Syagrus romanzoffianum 
Palm, Robellini Phoenix roebelenii 
Palm, Sago Caryota urens 
Pansy1 Viola spp.1 
Paper Plant Fatsia japonica 
Pear, Bradford's Pyrus calleryana 
Periwinkle Vinca spp. 
Petunia2 Petunia spp. 
Philodendron Philodendron spp. 
Phlox Phlox spp.

17 
COMMON NAME BOTANICAL NAME 
Photinia, Red-Tip Photinia glabra 
Pine Pinus spp. 
Pine, Black Pinus nigra 
Pine, Eastern White Pinus strobus 
Pine, Mugo Pinus mugo 
Pine, Scotch Pinus sylvestris 
Pink Dianthus spp. 
Plum, Flowering Prunus spp. 
Plum, Purple-Leaf Prunus spp. 
Poinsettia Euphorbia spp. 
Poplar Populus trichocarpa 
Pothos Epipremnum spp. 
Primrose Primula spp. 
Pussy's Foot Ageratum spp. 
Redbud, Western Cercis occidentalis 
Rhododendron Rhododendron spp. 
Ribbon Grass Setaria spp. 
Rose of Sharon Hibiscus syriacus 
Rose Rosa spp. 
Rose-Bay Nerium oleander 
Rosemary (Prostrate) Rosmarinus spp. 
Rubber Plant, Baby Peperomia spp. 
Rubber Tree Brassaia actinophylla 
Sage Salvia spp. 
Sand cherry Prunus pumila 
Snap-Dragon Antirrhinum spp. 
Snowball Ceanothus spp. 
Spirea Spirea budalda 
Spirea Spirea japonica 
Spruce, Blue Picea pungens 
Spruce, Norway Picea abies 
Spruce, White Picea glauca 
Starwort Aster spp. 
Stonecrop Sedum spp. 
Sweet Alyssum Lobularia maritima 
Thyme, Creeping Thymus serphyllum 
Umbrella Tree Brassaia actinophylla 
Verbena Verbena spp. 
Vervain Verbena spp. 
Viburnum Viburnum spp. 
Vinca Catharanthus roseus 
Viola Viola spp. 
White Alder Clethora spp. 
Weigela, Pink Weigela florida 
Willow, Virginia Itea virginica

18 
COMMON NAME BOTANICAL NAME 
Winterberry Ilex spp. 
Wormwood Artemisia spp. 
Yaupon Ilex spp. 
Yew, Spreading Taxus baccata 
Yucca Yucca spp. 
Zebra Plant Aphelandra spp. 
Zinnia Zinnia spp. 
1 Do not exceed 2 oz/100 gallons on these species. 
2 A225.05 may occasionally cause discoloration of flowers when applied directly to blooms of certain plant species. Not 
all varieties and colors have been evaluated.

19 
Table 12: Non-Sensitive Varieties of Ornamental Crabapple Species (Genus Malus) 
 
Callaway Golden Raindrops Mary Potter Selkirk 
Carmine (M. atrosanguinea) Hopa Molten Lava Sentinel 
Candymint Sargent Indian Magic New Centennial Silver Moon 
Christmas Holly Island Ormiston Roy Silverdrift 
David Jackii (M. baccata var. jackii) Pink Satin Sinai Fire 
Dolgo Japanese Flowering Crabapple 
(M. floribunda) 
Prairie Maid Sugar Tyme 
Donald Wyman Katherine Prairiefire Van Eseltine 
Dorothea Lancelot Profusion White Angel 
Doubloons Louisa Ralph Shay Wild crabapple (M. coronaria) 
Eleyi Malus x zumi var. Calocarpa Red Baron Winter Gold 
Evereste M. sargentii Red Jade 
Eyelynn Manchurian 
(M. baccata var. mandshurica) 
Sargent 
 
Table 13: Plants Sensitive to A225.05 
(Do not apply A225.05 to these species or varieties.) 
 
COMMON NAME BOTANICAL NAME 
Crabapple - Flame variety Malus spp. ‘Flame’ 
Crabapple – Brandywine variety Malus spp. ‘Brandywine’ 
Crabapple – Novamac variety Malus spp. ‘Novamac’ 
Cherry, Flowering – Yoshino variety Prunus x yedoensis 
Leatherleaf Fern and Other Ferns for cut foliage Rumohra adianformis and other species 
Privet Ligustrum spp. 
 
CONIFERS INCLUDING CHRISTMAS TREES AND COMMERCIAL PRODUCTION ROSES 
 
A225.05 may be used to control certain diseases on conifers and commercial production roses in indoor and outdoor 
production and landscape situations. See the DIRECTIONS FOR ORNAMENTALS section above for more detailed 
directions for use in landscape situations. 
[On the following Specific Use Directions for Conifer and Commercial Rose Production table, use the oz product/A rate 
(column 3) for products 8 oz or larger. Use the oz product/0.5 A rate (column 4) for 4 oz products.]

20 
Table 14: Specific Use Directions for Conifer and Commercial Rose Production 
 
Crop Target Diseases 
Use Rate oz 
product/A 
(lb ai/A) 
Use Rate 
oz product/0.5 A 
(lb ai/A) 
Application Instructions 
Conifers 
including 
Christmas Trees 
Diplodia tip blight 
(Diplodia pinea) 
 
Lophodermium 
needlecast 
(Lophodermium 
pinastri) 
 
Swiss needlecast 
(Phaeocrytopus 
gaumannii) 
3.2-8.0 
(0.10-0.25) 
1.6-4.0 
(0.10-0.25) 
Integrated Pest (Disease) Management: 
Integrate A225.05 into an overall disease 
management strategy that includes selection 
of varieties with disease tolerance and 
removal of plant debris in which inoculum 
may overwinter. 
 
Resistance Management: Do not apply more 
than four sequential applications of A225.05 
before alternating with a fungicide that is 
not in Group 11. 
 
Application Directions: Begin applications of 
A225.05 prior to disease development and 
continue throughout the year at 7- to 21-day 
intervals following the resistance 
management guidelines. 
 
Applications may be made by ground, air or 
chemigation. Ad adjuvant may be added at 
specified rates. 
Specific Use Restrictions: 
Do not apply more than 4.0 pounds product/acre/year (2.0 lb a.i./A) 
Do not make more than 8 applications of A225.05 per acre per year. 
Roses 
(commercial 
production) 
Downy Mildew 
(Peronospora sparsa) 
 
Powdery Mildew 
(Spherotheca pannosa) 
 
Rust 
(Phragmidium 
mucronatum, 
P.tuberculatum, and 
other Phragmidium 
spp.) 
 
Septoria Leaf Spot 
(Septoria rosea) 
 
Alternaria Leaf Spot 
(Alternaria alternata) 
1.6-8.0 
(0.05-0.25) 
0.8-4.0 
(0.05-0.25) 
Integrated Pest (Disease) Management: 
Integrate A225.05 into an overall 
disease management strategy that includes 
selection of varieties with disease tolerance, 
optimum plant populations, proper 
fertilization, winter and/or spring pruning, 
plant residue management and proper 
timing and placement of irrigation. 
 
Resistance Management: Do not make more 
than four sequential applications of A225.05 
before alternating with a fungicide that is 
not in Group 11. 
 
Application Directions: Begin applications of 
A225.05 prior to disease development and 
continue throughout the year on 7- to 21-
day intervals following the resistance 
management guidelines. Applications may 
be made by ground, air or chemigation. An 
adjuvant may be added at specified rates. 
Specific Use Restrictions: 
Do not apply more than 4.0 pounds product/acre/year (2.0 lb ai/A). 
Do not make more than 8 applications of A225.05 per acre per year.

21 
 
PLANTS GROWN FOR FRUIT AND NUTS 
Apply A225.05 to non-bearing fruit and nut plants grown for transplanting (non- bearing plants that will not produce 
harvestable fruit or nuts for one year after application). 
 
[On the following Fruit and Nut tables, use the oz product/A rate (column 3) for products 8 oz or larger. Use the oz 
product/0.5 A rate (column 4) for 4 oz products. Use the oz product/1,000 sq ft rate (column 5) for all product sizes.] 
 
Table 15: Specific Use Directions for Almonds 
 
Crop Target Diseases 
Use Rate oz 
product/A (lb 
ai/A) 
Use Rate oz 
product/0.5 A 
(lb ai/A) 
Use Rate oz 
product/ 
1,000 sq 
ft 
Application Instructions 
Almonds Alternaria leaf and 
fruit spot (Alternaria 
alternata) 
Anthracnose 
(Colletotrichum 
acutatum) 
Leaf Blight 
(Seimatosporium 
lichenicola) 
Leaf rust (Tranzschelia 
discolor) 
Scab 
(Cladosporium 
carpophilum) 
Shothole 
(Wilsonomyces 
carpophilus) 
3.2-8.0 
(0.1-0.25) 
1.6-4.0 
(0.1-0.25) 
0.075- 
0.18 
Resistance Management: Do not 
apply more than two sequential 
applications of A225.05 or other 
Group 11 fungicides before alternation 
with a fungicide that is not in Group 
11. 
Application Directions: Begin 
applications of A225.05 prior to 
disease development and continue 
throughout the year following the 
resistance management guidelines. 
Applications may be made by ground, 
air (minimum 15 GPA) or chemigation. 
A225.05 may be applied by air only at 
growth stages prior to and including 5 
weeks after petal fall. An adjuvant 
may be added at specified rates. 
For anthracnose, scab and shothole, 
begin applications prior to disease 
development and continue at 7- to 14-
day intervals throughout the year. 
Brown Rot Blossom 
Blight 
(Monilinia laxa, 
M. fructicola) 
6.4 – 8.0 
(0.2-0.25) 
3.2-4.0 
(0.2-0.25) 
0.15 - 0.18 For blossom blight, begin applications 
at early bloom and continue through 
petal fall. 
Specific Use Restrictions: 
• A use rate of 8 oz product/A is equal to 0.25 lb a.i./A. Do not apply more than 1.4 a.i./A per year of 
azoxystrobin-containing products. 
• Do not make more than 5 applications at the highest application rate (0.25 lb a.i./A) or 14 applications at the 
lowest application rate (0.1 lb a.i./A) per year. 
• Do not apply within 28 days of harvest (28-day PHI).

22 
Table 16: Specific Use Directions for Bananas and Plantains 
 
Crop Target Diseases 
Use Rate oz 
product/A 
(lb ai/A) 
Use Rate oz 
product/0.5 
A (lb ai/A) 
Use Rate 
oz product/ 
1,000 sq ft 
Application Instructions 
Bananas 
Plantains 
Black Sigatoka 
(Mycosphaerella 
fijiensis) 
Yellow Sigatoka 
(Mycosphaerella 
musicola) 
2.9-4.3 
(0.09- 
0.135) 
1.45-2.15 
(0.09-0.135) 
E0.07-0.1 Integrated Pest (Disease) 
Management: Integrate A225.05 into 
an overall disease 
management strategy that includes 
canopy management through 
removal of suckers, proper plant 
spacing, selection of varieties with 
disease tolerance, removal of plant 
debris in which inoculum overwinters, 
and good surface water drainage. 
Resistance Management: Follow the 
resistance management guidelines in 
the Resistance Management section. 
Do not apply more than two 
sequential applications of A225.05 or 
other Group 11 fungicides before 
alternation with a fungicide that is 
not in Group 11. 
Application Directions: Begin 
applications of A225.05 prior to 
disease development and continue 
throughout the year every 12-14 days 
following the resistance management 
guidelines. Applications may be made 
by ground, air or chemigation. An 
adjuvant may be added at specified 
rates. 
Specific Use Restrictions: 
• Do not apply more than 1.08 lb a.i./A per year of azoxystrobin-containing products. 
• Do not make more than 8 applications at the highest application rate (0.135 lb a.i./A) or 12 applications at 
the lowest application rate (0.09 lb a.i./A) per year. 
• May be applied the day of harvest (0-day PHI)

23 
Table 17: Specific Use Directions for Berries, Bushberry Subgroup 
 
Crop Target Diseases 
Use Rate oz 
product/A (lb 
ai/A) 
Use Rate oz 
product/0.5 A 
(lb ai/A) 
Use Rate oz 
product/ 
1,000 sq 
ft 
Application Instructions 
Berries 
Bushberry 
subgroup 
Blueberry 
Currant 
Elderberry 
Gooseberry 
Huckleberry 
Lingonberry 
Juneberry 
Salal 
including all 
cultivars 
and/or 
hybrids of 
these 
Alternaria Leaf Spot 
and Fruit Rot 
(Alternaria spp.) 
Anthracnose fruit rot 
(Colletotrichum 
gloeosporoides) 
Botryosphaeria canker 
(Botryosphaeria spp.) 
Mummyberry 
(Vaccinium spp.) 
Phomopsis stem 
canker (Phomopsis 
vaccinii) 
Powdery mildew 
(Sphaerotheca spp.) 
Septoria blight 
(Septoria spp.) 
3.2-8.0 
(0.1-0.25) 
1.6-4.0 
(0.1-0.25) 
0.08-0.18 Resistance Management: Follow 
the resistance management 
guidelines in the Resistance 
Management section. Do not 
apply more than two sequential 
applications of A225.05 or other 
Group 11 fungicides before 
alternation with a fungicide that is 
not in Group 11. 
Application Directions: Begin 
applications of A225.05 
prior to disease development and 
continue throughout the year on a 
7- to 14- day schedule, following 
the 
resistance management guidelines. 
Applications may be made by 
ground, air or chemigation. An 
adjuvant may be added at 
specified rates. 
Specific Use Restrictions: 
• Do not apply more than 0.75 lb ai/A per year of azoxystrobin-containing products. 
• Do not make more than 3 applications at the highest application rate (0.25 lb a.i./A) or 7 applications at the 
lowest application rate (0.1 lb a.i./A) per year. 
• May be applied at the day of harvest (0-day PHI).

24 
Table 18: Specific Use Directions for Berries, Caneberry Subgoup 
 
Crop Target Diseases 
Use Rate oz 
product/A (lb 
ai/A) 
Use Rate oz 
product/0.5 A 
(lb ai/A) 
Use Rate oz 
product/ 
1,000 sq 
ft 
Application Instructions 
Berries 
Caneberry 
subgroup 
Blackberry 
Bingleberry 
Boysenberry 
Dewberry 
Lowberry 
Marionberry 
Olallieberry 
Youngberry 
Loganberry 
Red and 
black 
raspberry 
including all 
cultivars 
and/or 
hybrids of 
these 
Anthracnose 
(Spaceloma necator) 
(Elsinoe veneta) 
Botryosphaeria canker 
(Botryosphaeria 
dothidea) 
Colletotrichum rot 
(Colletotrichum 
gloeosporioides) 
Leaf spot (Septoria 
rubi) (Sphaerulina 
rubi) 
Powdery mildew 
(Sphaerotheca 
macularis) 
Rosette or double 
blossom of 
blackberries 
(Cercosporella rubi) 
Spur blight (Didymella 
applanata) 
3.2-8.0 
(0.1-0.25) 
1.6-4.0 
(0.1-0.25) 
0.08- 
`0.18 
Integrated Pest (Disease) 
Management: Integrate A225.05 
into an overall disease 
management strategy that 
includes varieties with disease 
tolerance, proper timing of 
irrigation and removal of plant 
debris in which inoculum 
overwinters. 
Resistance Management: Follow 
the resistance management 
guidelines in the Resistance 
Management section. Do not 
apply more than two sequential 
applications of A225.05 or other 
Group 11 fungicides before 
alternation with a fungicide that is 
not in Group 11. 
Application Directions: Begin 
applications at onset of disease 
and continue as required until 
harvest. Make applications on a 7- 
to 14-day schedule. Use a 
minimum water volume of 10 
gallons per acre by ground and a 
minimum of 3 gallons by air. 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb a.i./A per year of azoxystrobin-containing products. 
• Do not make more than 6 applications at the highest application rate (0.25 lb a.i./A) or 15 applications at the 
lowest application rate (0.1 lb a.i./A) per year. 
• May be applied the day of harvest (0-day PHI).

25 
Table 19: Specific Use Directions for Citrus Fruit 
 
Crop Target Diseases 
Use Rate oz 
product/A (lb 
ai/A) 
Use Rate oz 
product/0.5 A 
(lb ai/A) 
Use Rate oz 
product/ 
1,000 sq 
ft 
Application Instructions 
Citrus 
Fruit 
Calamondin 
Citron 
Grapefruit 
Kumquat 
Lemon 
Lime 
Mandarin 
Orange 
(sour and 
sweet) 
Pummelo 
Satsuma 
mandarin 
Tangerine 
including all 
cultivars 
and/or 
hybrids of 
these 
Albinism (Alternaria 
alternata pv. citri) 
Alternaria leaf and 
fruit spot (Alternaria 
citri) 
Cercospora leaf spot 
(Cercospora spp.) 
Diplodia stem-end rot 
(Diplodia natalensis) 
Greasy spot 
(Mycosphaerella citri) 
Melanose 
(Diaporthe citri) 
Penicillium Decays 
Green mold, Whisker 
mold, suppression of 
Blue mold (Penicillium 
spp.) 
Phomopsis stem- end 
rot 
(Phomopsis citrii) 
Post-bloom fruit drop 
(PFD) (Colletotrichum 
acutatum) 
Powdery mildew 
(Erysiphe spp.) 
Scab 
(Elsinoe fawcettii) 
6.4-8.0 
(0.2-0.25) 
3.2-4.0 
(0.2-0.25) 
0.15- 
0.18 
Integrated Pest (Disease) 
Management: Integrate A225.05 
into an overall disease 
management strategy that includes 
selection of varieties with disease 
tolerance, removal of plant debris 
in which inoculum overwinters, and 
proper timing of irrigation. 
Resistance Management: Follow 
the resistance management 
guidelines in the Resistance 
Management section. Do not 
apply more than two sequential 
applications of A225.05 or other 
Group 11 fungicides before 
alternation with a fungicide that is 
not in Group 11. Do not make 
more than four (4) applications of 
A225.05 or other Group 11 
fungicide per year. 
Application Directions: Begin 
applications of A225.05 
prior to disease development and 
continue throughout the year on 7- 
to 21-day intervals following the 
resistance management guidelines. 
Under conditions that favor severe 
disease epidemics, use the higher 
application rates. Applications may 
be made by ground, air or 
chemigation. An adjuvant may be 
added at specified rates. Use a 
horticultural spray oil to improve 
control of 
greasy spot. 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb a.i./A per year of azoxystrobin-containing products. 
• Do not make more than 4 applications of A225.05 or other Group 11 fungicide per year. 
• May be applied the day of harvest (0-day PHI).

26 
Table 20: Specific Use Directions for Grapes 
 
Crop Target Diseases 
Use Rate oz 
product/A 
(lb ai/A) 
Use Rate oz 
product/0.5 A 
(lb ai/A) 
Use Rate oz 
product/ 
1,000 sq ft 
Application Instructions 
Grapes 
 
including 
Muscadines 
Black rot 
(Guignardia 
bidwellii) 
Downy Mildew 
(Plasmopara 
viticola) 
Phomopsis 
cane and leaf 
spot 
(Phomopsis 
viticola) 
Powdery mildew 
(Uncinula 
necator) 
 
Suppression 
Only: 
Botrytis bunch 
rot 
(Botrytis 
cinerea) 
5.1-8.0 
(0.16- 
0.25) 
2.55-4.0 
(0.16-0.25) 
0.11- 
0.18 
Integrated Pest (Disease) 
Management: Integrate A225.05 
into an overall disease management 
strategy that includes canopy 
management through pruning and 
thinning, proper selection of 
varieties with disease tolerance, 
proper timing and placement of 
irrigation and removal of plant debris 
in which inoculum overwinters. 
 
Resistance Management: Follow the 
resistance management guidelines in 
the Resistance Management section. 
Do not apply more than two 
sequential foliar applications of 
A225.05 or other Group 11 
fungicides before alternating with a 
fungicide that is not in Group 11. 
 
Application Directions: Begin 
applications of A225.05 prior to 
disease development and continue 
throughout the year every 10- 14 
days following the resistance 
management guidelines. 
Applications may be made by 
ground, air or chemigation. An 
adjuvant may be added at specified 
rates. 
 
ATTENTION 
A225.05 is extremely phytotoxic to 
certain apple varieties. DO NOT spray 
A225.05 where spray drift may reach 
apple trees. 
 
AVOIDING SPRAY DRIFT IS THE 
RESPONSIBILITY OF THE APPLICATOR. 
Specific Use Restrictions: 
• Do not apply more than 1.5 lbs. a.i./A per year of azoxystrobin-containing products. 
• Do not make more than 6 applications at the highest application rate (0.25 lb a.i./A) or 9 applications at 
the lowest application rate (0.16 lb a.i./A) per year. 
• Do not apply within 14 days of harvest (14-day PHI).

27 
Table 21: Specific Use Directions for Pecans 
 
Crop Target Diseases 
Use Rate oz 
product/A (lb 
ai/A) 
Use Rate oz 
product/0.5 A 
(lb ai/A) 
Use Rate oz 
product/ 
1,000 sq 
ft 
Application Instructions 
Pecans Anthracnose 
(Glomerella 
cingulata) 
Scab 
(Cladosporium 
caryigenum) 
3.2-6.4 
(0.10-0.20) 
1.6-3.2 
(0.10-0.20) 
0.08-0.15 Integrated Pest (Disease) 
Management: Integrate A225.05 into an 
overall disease management strategy that 
includes selection of varieties with 
tolerance to disease and removal of plant 
debris in which inoculum overwinters. 
Resistance Management: Follow the 
resistance management guidelines in the 
Resistance Management section. Do not 
apply more than two sequential 
applications of A225.05 or other Group 11 
fungicides before alternation with a 
fungicide that is not in Group 11. 
Application Directions: Begin applications 
of A225.05 applications prior to disease 
development and continue throughout the 
year on 7- to 21-day intervals following the 
resistance management guidelines. 
Applications may be made by ground, air 
or chemigation. An adjuvant may be 
added at specified rates. 
Specific Use Restrictions: 
• Do not apply more than 1.2 lb a.i./A per year of azoxystrobin-containing products. 
• Do not make more than 6 applications at the highest application rate (0.2 lb a.i./A) or 12 applications at the 
lowest application rate (0.1 lb a.i./A) per year. 
• Do not apply within 45 days of harvest (45-day PHI).

28 
Table 22: Specific Use Directions for Pistachios 
 
Crop Target Diseases 
Use Rate oz 
product/A (lb 
ai/A) 
Use Rate oz 
product/0.5 A 
(lb ai/A) 
Use Rate oz 
product/ 
1,000 sq 
ft 
Application Instructions 
Pistachios Alternaria late blight 
(Alternaria alternata) 
Botryosphaeria 
panicle and shoot 
blight 
(Botryosphaeria 
dothidea) 
Septoria leaf spot 
(Septoria 
pistaciarum) 
3.2-8.0 
(0.10-0.25) 
1.6-4.0 
(0.10-0.25) 
0.08-0.18 Integrated Pest (Disease) 
Management: Integrate A225.05 
into an overall disease 
management strategy that includes 
selection of varieties with disease 
tolerance and removal of plant 
debris in which inoculum 
overwinters. 
Resistance Management: Follow the 
resistance management guidelines in 
the Resistance Management 
section. Do not apply more than two 
sequential applications of A225.05 or 
other Group 11 fungicides before 
alternation with a fungicide that is 
not in Group 11. 
Application Directions: Begin 
applications of A225.05 prior to 
disease development and continue 
throughout the year on 7- to 21-day 
intervals following the resistance 
management guidelines. 
Applications may be made by 
ground, air or chemigation. An 
adjuvant may be added at specified 
rates. 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb a.i./A per year of azoxystrobin-containing products. 
• Do not make more than 6 applications at the highest application rate (0.25 lb a.i./A) or 15 applications at the 
lowest application rate (0.1 lb a.i./A) per year. 
• Do not apply within 7 days of harvest (7-day PHI).

29 
Table 23: Specific Use Directions for Stone Fruit 
 
Crop Target Diseases 
Use Rate oz 
product/A 
(lb ai/A) 
Use Rate oz 
product/0.5 
A 
(lb ai/A) 
Use Rate 
oz 
product/ 
1,000 sq 
 
Application Instructions 
Stone 
Fruit 
 
Apricot 
Cherry, 
sweet 
Cherry, 
tart 
Nectarine 
Peach 
Plum 
Plumcot 
Prune 
Alternaria spot and 
fruit rot (Alternaria 
alternata) 
Anthracnose 
(Colletotrichum 
prunicola, 
C. 
gloeosporioides) 
Leaf rust 
(Tranzschelia 
discolor) 
Powdery mildew 
(Sphaerotheca 
pannosa, 
Podosphaera 
clandestina) 
Scab 
(Cladosporium 
carpophilum) 
Shot hole 
(Wilsonomyces 
carpophilus) 
3.2-8.0 
(0.1-0.25) 
1.6-4.0 
(0.1-0.25) 
0.08-0.18 Resistance Management: 
Follow the resistance 
management guidelines in the 
Resistance Management 
section. Do not apply more than 
two sequential applications of 
A225.05 or other Group 11 
fungicides before alternation 
with a fungicide that is not in 
Group 11. 
Application Directions: For 
brown rot blossom blight, begin 
applications at early bloom and 
continue through petal fall. For 
brown rot on fruit, A225.05 
may be applied to fruit up to 
the day of harvest. For scab, 
begin applications at petal fall 
and continue at 7- to 14-day 
intervals. For all other diseases, 
begin application at the onset 
of disease as a protectant 
fungicide and continue on a 7- 
to 14-day schedule. For 
peaches only, 5-8 oz. of 
A225.05 may be used for 
scab control. Applications may 
be made by ground, air or 
chemigation. 
Brown rot blossom 
blight and fruit rot 
(Monilinia 
fructicola, M. laxa) 
6.4-8.0 
(0.2-0.25) 
3.2-4.0 
(0.2-0.25) 
0.15-0.18 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb a.i./A per year of azoxystrobin-containing products. 
• Do not make more than 6 applications at the highest application rate (0.25 lb a.i./A) or 15 applications at 
the lowest application rate (0.1 lb a.i./A) per year. 
• May be applied the day of harvest (0-day PHI).

30 
Table 24: Specific Use Directions for Strawberry 
 
Crop Target Diseases 
Use Rate oz 
product/A (lb 
ai/A) 
Use Rate oz 
product/0.5 A 
(lb ai/A) 
Use Rate oz 
product/ 
1,000 sq 
ft 
Application Instructions 
Strawberry Anthracnose 
(Colletotrichum 
fragariae) 
Powdery mildew 
(Sphaerotheca 
macularis) 
 
Suppression only: 
Botrytis on the 
foliage (Botrytis 
cinerea) 
3.2-8.0 
(0.1-0.25) 
1.6-4.0 
(0.1-0.25) 
0.08-0.18 Resistance Management: Follow the 
resistance management guidelines in 
the Resistance Management section. 
Do not apply more than two 
sequential applications of A225.05 or 
other Group 11 fungicides before 
alternation with a fungicide that is 
not in Group 11. 
Application Directions: Begin 
applications of A225.05 prior to 
disease development and continue 
throughout the year on a 7- to 10-
day schedule, following the 
resistance management guidelines. 
Applications may be made by 
ground, air or chemigation. An 
adjuvant may be added at specified 
rates. 
For dip applications at transplanting 
for commercial berry production: 
For suppression of root and crown 
rot caused by Colletotrichum spp., 
mix 2.5-4.2 oz of A225.05 per 100 
gallons of water. Dip plants for 2-5 
minutes. Plant treated plants as 
quickly as possible. Wash transplants 
to remove excess soil prior to 
dipping. For continued anthracnose 
control, follow with foliar 
applications beginning 2-3 weeks 
after transplant. 
Specific use Restrictions: 
• Do not apply more than 1.0 lb a.i./A per year of azoxystrobin-containing products. 
• Do not make more than 4 applications at the highest application rate (0.25 lb a.i./A) or 10 applications at the 
lowest application rate (0.1 lb a.i./A) per year. 
• May be applied the day of harvest (0-day PHI).

31 
Table 25: Specific Use Directions for Tree Nuts (except Almonds, Pecans, and Pistachios) 
 
Crop Target Diseases 
Use Rate oz 
product/A (lb 
ai/A) 
Use Rate oz 
product/0.5 A 
(lb ai/A) 
Use Rate oz 
product/ 
1,000 sq 
ft 
Application Instructions 
Tree Nuts 
Beechnut 
Brazil nut 
Butternut 
Cashew 
Chestnut 
Chinquapin 
Filbert 
Hickory 
Macadamia 
Walnut 
Almonds, 
Pecans, 
Pistachios: 
see specific 
use 
instructions. 
Alternaria leaf and 
fruit spot (Alternaria 
alternata) 
Anthracnose 
(Colletotrichum 
acutatum, 
Glomerella 
cingulata) 
Eastern filbert blight 
(Anisogramma 
anomale) 
Late blight 
(Alternaria 
alternata) 
Scab 
(Cladosporium 
carpophilum) 
Septoria leaf spot 
(Septoria 
pistaciarum) 
Shothole 
(Wilsonomyces 
carpophilus) 
3.2-6.4 
(0.10-0.20) 
1.6-3.2 
(0.10-0.20) 
0.08- 
0.15 
Resistance Management: Follow the 
resistance management guidelines in 
the Resistance Management 
section. Do not apply more than 
two sequential applications of 
A225.05 or other Group 11 
fungicides before alternation with a 
fungicide that is not in Group 11. 
Application Directions: Begin 
applications of A225.05 applications 
prior to disease development and 
continue 
throughout the year following the 
resistance management guidelines. 
Applications may be made by 
ground, air or chemigation. An 
adjuvant may be added at specified 
rates. For all other diseases, begin 
applications prior to disease 
development and continue at 7- to 
21-day intervals throughout the 
year. 
Blossom blight 
(Monilinia laxa, 
M. fructicola) 
6.4 
(0.20) 
3.2 
(0.20) 
0.15 For blossom blight, begin 
applications at early bloom and 
continue through petal fall. Do not 
make more than six applications of 
A225.05 or other strobilurin 
fungicide per acre per year. 
Specific use Restrictions: 
• Do not apply more than 1.2 lb a.i./A per year of azoxystrobin-containing products. 
• Do not make more than 6 applications of A225.05 or other strobilurin fungicide per acre per year. 
• Do not apply within 45 days of harvest (45-day PHI).

32 
Table 26: Specific Use Instructions for Tropical Fruit 
 
Crop Target Diseases 
Use Rate oz 
product/A 
(lb ai/A) 
Use Rate oz 
product/0.5 A 
(lb ai/A) 
Use Rate oz 
product/1,000 
sq ft 
Application Instructions 
Tropical 
Fruit 
Acerola 
Atemoya 
Avocado 
Biriba 
Canistel 
Cherimoya 
Custard 
apple 
Feijoa 
Guava 
Ilama 
Jaboticaba 
Jackfruit 
Longan 
Loquat 
Lychee 
Mango 
Papaya 
Passionfruit 
Pawpaw 
Persimmon 
Pulasan 
Pummello 
Rambutan 
Sapodilla 
Sapote, 
black 
Sapote, 
mamey 
Sapote, 
white 
Soursop 
Star apple 
Starfruit 
Sugar 
apple 
Spanish 
lime 
Tamarind 
Uniq fruit 
Alternaria leaf and 
fruit spot (Alternaria 
spp.) 
Anthracnose 
(Colletotrichum spp.) 
Cercospora leaf spot 
(Cercospora spp.) 
Powdery mildew 
(Erysiphe spp.) 
Rust 
(Puccinia spp.) 
3.2-8.0 
(0.1-0.25) 
1.6-4.0 
(0.1-0.25) 
0.08-0.18 Resistance Management: 
Follow the resistance 
Management guidelines in the 
Resistance Management section. 
Do not apply more than two 
Sequential applications of 
A225.05 or other Group 11 
fungicides before alternation 
with a fungicide that is not in 
Group 11. 
Application Directions: Begin 
applications of A225.05 
prior to disease development and 
continue throughout the year on 
a 10- to 14-day schedule, 
following the resistance 
management guidelines. 
Applications may be made by 
ground, air or chemigation. An 
adjuvant may be added at 
specified rates. 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb a.i./A per year of azoxystrobin-containing products. 
• Do not make more than 6 applications at the highest application rate (0.25 lb a.i./A) or 15 applications at 
the lowest application rate (0.1 lb a.i./A) per year. 
• May be applied the day of harvest (0-day PHI).

33 
VEGETABLE AND HERB PLANTS 
Apply to vegetable and herb plants grown for transplanting. 
 
Table 27: Specific Use Directions for Asparagus Plants 
 
Crop Target Diseases 
Use Rate oz 
product/ 1,000 
sq ft 
(l bai/A) 
Use Rate oz 
product/ 5,000 
sq ft 
Application Instructions 
Asparagus Stemphyllium 
purple spot 
(Stemphyllium 
vesicarium) 
0.075-0.18 
(0.1-0.25) 
0.375-0.9 Resistance Management: Do not apply more than one 
application of A225.05 or other Group 11 fungicides 
before alternation with a fungicide that is not in Group 
11. 
Application Directions: Begin applications of A225.05 
prior to disease development and continue throughout 
plant production on a 7- to 14-day schedule, following 
the resistance management guidelines. Applications 
may be made by foliar sprays, including chemigation. An 
adjuvant may be added at specified rates. Use a 
minimum of 10 gallons of water per acre. 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb a.i./A per year of azoxystrobin-containing products. 
• Do not make more than 6 applications at the highest application rate (0.25 lb a.i./A) or 15 applications at the 
lowest application rate (0.1 lb a.i./A) per year. 
• Do not apply within 100 days of harvest (100-day PHI). 
• A use rate of 0.18 oz product/1,000 sq. ft. is equal to 0.25 lb a.i./A 
 
Table 28: Specific Use Directions for Brassica Head and Stem Subgroup Plants 
 
Crop Target Diseases 
Use Rate oz 
product/ 1,000 
sq ft (lb ai/A) 
Use Rate oz 
product/ 5,000 
sq ft 
Application Instructions 
Brassica 
Head and stem 
subgroup 
Broccoli 
Chinese broccoli [gai lon] 
Brussels sprouts 
Cabbage 
Chinese cabbage [napa] 
Chinese mustard 
cabbage [gai choy] 
Cauliflower 
Cavalo broccolo 
Kohlrabi 
including all 
cultivars and/or 
hybrids of these 
Alternaria leaf spot 
(Alternaria spp.) 
Downy mildew 
(Peronospora 
parasitica) 
Pin rot (Alternaria 
spp.) 
0.08-0.18 
(0.1-0.25) 
0.4-0.9 Resistance Management: Do not 
apply more than one application of 
A225.05 or other Group 11 fungicides 
before alternation with a fungicide 
that is not in Group 11. 
Application Directions: Begin 
applications of A225.05 prior to 
disease development and continue 
throughout plant production on a 7- 
to 14-day schedule, following the 
resistance management guidelines. 
Applications may be made by foliar 
sprays including chemigation. An 
adjuvant may be added at specified 
rates. Use a minimum of 10 gallons of 
water per acre. 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb a.i./A per year of azoxystrobin-containing products. 
• Do not make more than 6 applications at the highest application rate (0.25 lb a.i./A) or 15 applications at the 
lowest application rate (0.1 lb a.i./A) per year. 
• May be applied the day of harvest (0-day PHI).

34 
Table 29: Specific Use Directions for Brassica Leafy Greens Subgroup Plants 
 
Crop Target Diseases 
Use Rate oz 
product/ 1,000 
sq ft (lb ai/A) 
Use Rate oz 
product/ 5,000 
sq ft 
Application Instructions 
Brassica 
Leafy greens 
subgroup 
Broccoli raab 
Cabbage, 
Chinese 
Collards 
Kale 
Mizuna 
Mustard greens 
Mustard spinach 
Rape greens 
including all 
cultivars and/or 
hybrids of these 
Black spot (Alternaria 
spp.) 
Cercospora leaf spot 
(Cercospora spp.) 
White rust (Albugo 
candida) 
0.08-0.18 
(0.1-0.25) 
0.4-0.9 Resistance Management: Follow the 
resistance management guidelines in the 
Resistance Management section. Do not 
apply more than one application of 
A225.05 or other Group 11 fungicides 
before alternation with a fungicide that is 
not in Group 11. 
Application Directions: Begin 
applications of A225.05 prior to disease 
development and continue throughout 
plant production on a 7- to 14-day 
schedule, following the resistance 
management guidelines. Applications 
may be made by foliar sprays including 
chemigation. An adjuvant may be added 
at specified rates. Use a minimum of 10 
gallons of water per acre. 
Specific Use Restrictions: 
• Do not apply more than 0.75 lb a.i./A per year of azoxystrobin-containing products. 
• Do not make more than 3 applications at the highest application rate (0.25 lb a.i./A) or 7 applications at the 
lowest application rate (0.1 lb a.i./A) per year 
• May be applied the day of harvest (0-day PHI). 
 
 
Table 30: Specific use Directions for Bulb Vegetable Plants 
 
Crop Target Diseases 
Use Rate oz 
product/ 1,000 
sq ft (lb ai/A) 
Use Rate oz. 
product/ 
5,000 sq ft 
Application Instructions 
Bulb 
Vegetables 
Garlic 
Leek 
Onion, bulb 
Onion, 
green 
Welsh 
onion 
Shallot 
Foliar Diseases 
Cladosporium leaf 
blotch (Cladosporium 
allii) 
Purple blotch 
(Alternaria porri) 
Rust 
(Puccinia allii) 
White rot (Sclerotium 
cepivorum) 
0.08-0.15 
(0.1-0.20) 
0.4-0.75 Resistance Management: Do not apply more 
than one application of A225.05 or other 
Group 11 fungicides before alternation with a 
fungicide that is not in Group 11. 
Application Directions: For downy mildew, 
make preventative applications on a 5- to 7-
day schedule. For all other diseases, begin 
applications of A225.05 prior to disease 
development and continue throughout plant 
production every 7-14 days, following the 
resistance management guidelines. 
Applications may be made by foliar sprays 
including chemigation. An adjuvant may be 
added at specified rates. Test mixtures of 
A225.05 with insecticides and silicone 
adjuvants for crop safety before application to 
the crop. 
Botrytis leaf blight 
(Botrytis aclada) 
Downy mildew 
(Peronospora 
destructor) 
0.11-0.18 
(0.15-0.25) 
0.55-0.9 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb a.i./A per year of azoxystrobin-containing products. 
• Do not make more than 6 applications at the highest application rate (0.25 lb a.i./A) or 15 applications at the 
lowest application rate (0.1 lb a.i./A) per year. 
• May be applied the day of harvest (0-day PHI).

35 
Table 31: Specific Use Directions for Celery Plants 
 
Crop Target Diseases 
Use Rate oz 
product/ 1,000 sq 
ft (lb ai/A) 
Use Rate oz 
product/ 5,000 
sq ft 
Application Instructions 
Celery Early blight (Cercospora 
apii) 
Late blight (Septoria 
apicola) 
 
For additional diseases, see 
Leafy Vegetables. 
0.11-0.18 
(0.15-0.25) 
0.55-0.9 Resistance Management: Do not apply 
more than one application of A225.05 or 
other Group 11 fungicides before 
alternation with a fungicide that is not in 
Group 11. 
Application Directions: Begin applications 
of A225.05 prior to disease development 
and continue throughout plant production 
every 7-14 days, following the resistance 
management guidelines. 
 
Applications may be made by foliar sprays 
including chemigation. An adjuvant may be 
added at specified rates. 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. 
• Do not make more than 6 applications at the highest application rate (0.25 lb a.i./A) or 10 applications at the 
lowest application rate (0.15 lb a.i./A) per year. 
• May be applied the day of harvest (0 day PHI).

36 
Table 32: Specific Use Directions for Cucurbit Plants 
 
Crop Target Diseases 
Use Rate oz 
product/ 1,000 
sq ft (lb ai/A) 
Use Rate oz 
product/ 5,000 
sq ft 
Application Instructions 
Cucurbits 
Cantaloupe 
Chayote 
Chinese- 
waxgourd 
Cucumber 
Gourds 
Honeydew 
Melons 
Momordica 
spp. 
(bitter melon, 
balsam 
apple) 
Muskmelon 
Watermelon 
Pumpkin 
Squash 
Zucchini 
including 
cultivars and/or 
hybrids of 
these 
Anthracnose 
(Colletotrichum 
lagenarium) 
Belly Rot (Rhizoctonia 
solani) 
Downy Mildew 
(Pseudoperonospora 
cubensis) 
Gummy Stem Blight 
(Didymella bryoniae) 
Leaf spots (Alternaria spp., 
Cercospora spp.) 
Myrothecium canker 
(Myrothecium roridum) 
Plectosporium blight 
(Plectosporium tabacinum) 
Powdery Mildew 
(Sphaerotheca fuliginea, 
Erysiphe cichoracearum) 
Ulocladium leaf spot 
(Ulocladium cucurbitae) 
0.08-0.18 
(0.10-0.25) 
0.4-0.9 Resistance Management: Do not apply 
more than one application of A225.05 
or other Group 11 fungicides before 
alternation with a fungicide that is not 
in Group 11. Do not make more than 
four (4) foliar applications of A225.05 
or other Group 11 fungicides per crop 
per acre per year. 
Application Directions: For both downy 
and powdery mildew, make 
preventative applications on a 5- to 7-
day schedule. For belly rot control, 
make the first application at the 1- to 3-
leaf crop stage with a second 
application just prior to vine tip over or 
10-14 days later, whichever occurs first. 
For all other diseases, begin 
applications of A225.05 prior to disease 
development and continue 
throughout plant production every 
7-14 days, following the resistance 
management guidelines. Applications 
may be made by foliar sprays, including 
chemigation. An adjuvant may be 
added at specified rates. However, do 
not tank-mix A225.05 with COC, MSO 
or silicon adjuvants. 
Do not tank-mix A225.05 with 
malathion, dicofol, endosulfan, 
methomyl, chlorpyrifos, potassium 
laurate or dicloran. 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. 
• Do not make more than 4 applications of A225.05 or other Group 11 fungicides per crop per acre per 
year. 
• Do not apply within 1 day of harvest (1-day PHI).

37 
Table 33: Specific Use Directions for Herb and Spice Plants 
 
Crop Target Diseases 
Use Rate oz 
product/ 1,000 
sq ft (lb ai/A) 
Use Rate oz 
product/ 5,000 
sq ft 
Application Instructions 
Herbs & Spices 
(except basil and 
black pepper) 
Allspice; Angelica; Anise 
(seed); Anise, star; 
Annatto; Balm; Borage; 
Burnet; Camomile; Caper 
(buds); Caraway; Caraway, 
black; Cardamom; Cassia 
(buds); Catnip; Celery 
seed; Chervil (dried); 
Chive; Chive, Chinese; 
Cinnamon; Clary; Clove 
(buds); Coriander (cilantro 
or Chinese parsley) (leaf); 
Coriander (seed); 
Costmary; Culantro (leaf 
and seed); Cumin; Curry 
(leaf); Dill (seed); Dillweed; 
Fennel, common; Fennel, 
Florence (seed); 
Fenugreek; Grains of 
paradise; Horehound; 
Hyssop; Juniper (berry); 
Lavender; Lemongrass; 
Lovage (leaf and seed); 
Mace; Marigold; 
Marjoram; Mustard 
(seed), Nasturtium; 
Nutmeg; Parsley (dried); 
Pennyroyal; Pepper, 
white; Poppy seed; 
Rosemary; 
Rue; Saffron; Sage; Savory, 
summer and winter; Sweet 
bay; Tansy; Tarragon; 
Thyme; Vanilla; 
Wintergreen; Woodruff; 
Wormwood 
Alternaria leafspot 
(Alternaria spp.) 
Corynespora blight 
(Corynespora cassiicola) 
Downy mildew (except 
Basil) (Plasmopara spp., 
Peronospora spp.) 
Dill blight (Cercosporidium 
punctum) 
Phoma blight 
(Passalora puncta) 
Powdery mildew 
(Erysiphe spp., 
Sphaerotheca spp.) 
0.08-0.18 
(0.1-0.25) 
0.4-0.9 Resistance Management: Do 
not apply more than two 
sequential applications of 
A225.05 or other Group 11 
fungicides before alternation 
with a fungicide that is not in 
Group 11. 
Application Directions: Begin 
applications of A225.05 at the 
onset of disease development 
and continue throughout 
plant production on a 7- day 
schedule, following the 
resistance 
management guidelines. 
Applications may be made by 
foliar sprays. An adjuvant 
may be added at specified 
rates. Use a minimum of 30 
gallons of water per acre. 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. 
• Do not make more than 6 applications at the highest application rate (0.25 lb a.i./A) or 15 applications at the 
lowest application rate (0.1 lb a.i./A) per year. 
• May be applied the day of harvest (0-day PHI). 
• Do not apply by aerial application.

38 
 
Table 34: Specific Use Directions for Basil Plants 
 
Crop Target Diseases 
Use Rate oz 
product/ 1,000 
sq ft (lb ai/A) 
Use Rate oz 
product/ 
5,000 sq ft 
Application Instructions 
Basil Downy mildew 
(Peronospora 
belbahrii) 
0.18 
(0.25) 
0.9 Plug Production*: Apply to emerged plants in plug 
production trays prior to disease development. 
Apply uniformly to foliage using a minimum of 3.4 
gallons of water/5,000 sq ft (30 gallons/A). Make 
no more than one application during the plug 
production phase. Follow the A225.05 application 
with alternative chemistries on a weekly schedule, 
implementing a preventative integrated disease 
management program. 
Finish Production**: Apply to plants following 
transplant of plugs to trays, pots or containers in 
which plants are grown to finish. Apply uniformly to 
foliage using a minimum of 3.4 gallons of 
water/5,000 sq ft (30 gallons/A). Make no more 
than one application during the finish production 
phase. Follow the A225.05 application with 
alternative chemistries on a weekly schedule, 
implementing a preventative integrated disease 
management program. For specific resistance 
management programs, contact your state 
Extension specialist. 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. 
• Do not make more than 6 applications per acre per year. 
• May be applied the day of harvest (0-day PHI). 
 
* Plug production refers to the production of a young plant grown from seed in a multi -celled germination tray for a 
short period of time. After growing to a desired size, the plug is then transplanted in a larger pot or container to grow to 
a larger size suitable to sell. 
** Finish production refers to the production of a finished plant grown to a desired size suitable to sell in a garden 
center, large format retailer, or other retailers selling plants to consumer s for home and garden plantings.

39 
Table 35: Specific Use Directions for Leafy Vegetable Plants (except Brassica) 
 
Crop Target Diseases 
Use Rate oz 
product/ 1,000 
sq ft (lb ai/A) 
Use Rate oz 
product/ 5,000 
sq ft 
Application Instructions 
Leafy 
Vegetables 
(except 
Brassica) 
Amaranth 
Arugula 
Cardoon 
Celery 
Celtuce 
Chervil 
Chrysanthemum, 
edible 
Coriander, leaves 
(Cilantro) 
Corn salad 
Cress 
Dandelion 
Dock Endive Fennel 
Lettuce, head 
and leaf 
Orach 
Parsley 
Purslane 
Radicchio 
Rhubarb 
Spinach 
Swiss Chard 
including cultivars 
and/or hybrids of 
these 
Foliar Diseases 
Alternaria leaf spot 
(Alternaria sonchi, 
A. spp.) 
Anthracnose 
(Microdochium 
panattonianum, 
Colletotrichum 
dematium) 
Cercospora leaf spot 
(Cercospora spp.) 
Septoria leaf spot 
(Septoria petroselini) 
White rust (Albugo 
occidentalis) 
0.08-0.18 
(0.1-0.25) 
0.4-0.9 Resistance Management: Do not 
apply more than one application 
of A225.05 or other Group 11 
fungicides before alternation 
with a fungicide that is not in 
Group 11. 
Application Directions: For both 
downy and powdery mildew, 
make preventative applications on 
a 5- to 7-day schedule. For all 
other diseases, begin applications 
of A225.05 prior to disease 
development and continue 
throughout plant production 
every 7-14 days following the 
resistance management 
guidelines. Applications may be 
made by foliar sprays including 
chemigation. An adjuvant may be 
added at specified rates. 
ATTENTION: Applications of 
A225.05 to leafy vegetable foliage 
have contributed to phytotoxicity 
under certain circumstances. 
Proceed with caution with regard 
to tank mixes and adjuvants when 
treating all leafy vegetables with 
A225.05. A225.05 must not 
be tank-mixed on leaf lettuce with 
permethrin, fosetyl-al, lambda-
cyhalothrin, or another product 
that may increase the penetration 
of A225.05 into the leaf surface, 
including silicone wetters. 
Downy mildew (Bremia 
lactucae) 
Powdery mildew 
(Eyrisiphe 
cichoracearum) 
0.15-0.18 
(0.2-0.25) 
0.75-0.9 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. 
• Do not make more than 6 applications at the highest application rate (0.25 lb a.i./A) or 15 applications at the 
lowest application rate (0.1 lb a.i./A) per year. 
• May be applied the day of harvest (0-day PHI).

40 
 
Table 36: Specific Use Directions for Mint Plants 
 
Crop Target Diseases 
Use Rate oz 
product/ 1,000 
sq ft (lb ai/A) 
Use Rate oz 
product/ 5,000 
sq ft 
Application Instructions 
Mint 
(Fresh) 
Powdery mildew 
(Erysiphe spp.) 
Rust 
(Puccinia menthae) 
0.08-0.18 
(0.1-0.25) 
0.4-0.9 Resistance Management: Do not apply 
more than two sequential applications of 
A225.05 or other Group 11 fungicides 
before alternation with a fungicide that is 
not in Group 11. 
Application Directions: Begin applications 
of A225.05 prior to disease development 
and continue throughout plant production 
on a 7- to 10-day schedule, following the 
resistance management 
Guidelines. Applications may be made by 
foliar sprays including chemigation. An 
adjuvant may be added at specified rates. 
Specific Use Restrictions: 
• Do not apply more than 0.75 lb ai/A per year of azoxystrobin-containing products. 
• Do not make more than 3 applications at the highest application rate (0.25 lb a.i./A) or 7 applications at the 
lowest application rate (0.1 lb a.i./A) per year. 
• For fresh mint, may be applied the day of harvest (0-day PHI). 
 
Table 37: Specific Use Directions for Pepper and Other Fruiting Vegetable Plants (except Cucurbits) 
 
Crop Target Diseases 
Use Rate oz 
product/ 1,000 
sq ft (lb ai/A) 
Use Rate oz 
product/ 
5,000 sq ft 
Application Instructions 
Peppers and 
other Fruiting 
Vegetables 
(except 
cucurbits) 
Bell Pepper 
Non-Bell 
Pepper 
Sweet Non-Bell 
Pepper 
Eggplant 
Groundcherry 
Okra 
Pepino 
Tomatillo 
See specific 
directions for 
use for 
Tomatoes. 
Anthracnose 
(Colletotrichum spp.) 
Cercospora leaf spot 
(Cercospora capsici) 
Downy mildew 
(Peronospora tabacini) 
Powdery mildew 
(Sphaerotheca spp.) 
0.08-0.18 
(0.1-0.25) 
0.4-0.9 Resistance Management: Follow the 
resistance management guidelines in 
the Resistance Management section. 
Do not apply more than one application 
of A225.05 or other Group 11 fungicides 
before alternation with a fungicide that 
is not in Group 11. 
Application Directions: Begin 
applications of A225.05 prior to disease 
development and continue throughout 
plant production on a 7- to 14-day 
schedule, following the resistance 
management guidelines. 
Applications may be made by foliar 
sprays including chemigation. An 
adjuvant may be added at specified 
rates.

41 
 
Specific Use Restrictions: 
• Do not apply more than 1.0 lb ai/A per year of azoxystrobin-containing products. 
• Do not make more than 4 applications at the highest application rate (0.25 lb a.i./A) or 10 applications at the 
lowest application rate (0.1 lb a.i./A) per year. 
• May be applied the day of harvest (0-day PHI). 
 
Table 38: Specific Use Directions for Tomato Plants 
 
Crop Target Diseases 
Use Rate oz 
product/1,000 sq ft 
(lb ai/A) 
Use Rate oz 
product/ 5,000 
sq ft 
Application Instructions 
Tomatoes Anthracnose 
(Colletotrichum coccodes) 
Black Mold (Alternaria 
alternata) 
Buckeye Rot 
(Phytophthora spp.) 
Early Blight (Alternaria 
solani) 
Powdery Mildew 
(Oidiopsis sicula) 
Septoria Leaf spot 
(Septoria lycopersici) 
Target spot (Corynespora 
cassiicola) 
0.024-0.08 
(0.03-0.10) 
0.12-0.4 Resistance Management: Do not 
apply more than one application of 
A225.05 or other Group 11 
fungicides before alternation with 
a fungicide that is not in Group 11. 
Application Directions: Begin 
applications of A225.05 prior to 
disease development and continue 
throughout plant production 
following the resistance 
management guidelines. For late 
blight, apply A225.05 at 5- to 7-day 
intervals. For all other tomato 
diseases, apply A225.05 on 7- to 
21-day intervals. Applications may 
be made by foliar sprays including 
chemigation. Under certain 
environmental conditions 
(particularly high temperatures), 
A225.05 in combination with 
high rates of silicone-containing or 
oil-containing (petroleum or crop) 
additives or adjuvants may cause 
injury. Do not exceed 0.125% 
adjuvant (v/v). Consult an Atticus, 
LLC representative for more 
information concerning additives 
or adjuvants. A tank mixture with 
Dimethoate may cause crop injury. 
Do not use adjuvants or tank mix 
A225.05 with any emulsifiable 
concentrate (EC) product. 
Late Blight (Phytophthora 
infestans) 
0.08 
(0.10) 
0.4 
Specific Use Restrictions: 
• Do not apply A225.05 until 35 days after seeding or 21 days after transplanting plugs to larger pots or 
containers. 
• Do not apply more than 0.6 lb ai/A per year of azoxystrobin-containing products. 
• Do not make more than 6 applications at the highest application rate (0.1 lb a.i./A) or 20 applications at the 
lowest application rate (0.03 lb a.i./A) per year. 
• May be applied the day of harvest (0-day PHI).

42 
 
Table 39: A225.05 Rate Conversion Chart (For use with 4 oz package size only) 
 
oz product/A oz product/ 1,000 sq ft Treated Acres/ 4 oz product 
1.0 0.025 4.0 
1.5 0.035 2.7 
2.0 0.05 2.0 
2.5 0.06 1.6 
3.0 0.07 1.3 
3.5 0.08 1.1 
4.0 0.09 1.0 
4.5 0.1 0.9 
5.0 0.11 0.8 
5.5 0.13 0.73 
6.0 0.14 0.67 
6.5 0.15 0.62 
7.0 0.16 0.57 
7.5 0.17 0.53 
8.0 0.18 0.5 
8.7 0.2 0.46 
13.1 0.3 0.31 
17.4 0.4 0.23

43 
 
LIMITATION OF WARRANTY AND LIABILITY 
IMPORTANT: READ BEFORE USE. Read the entire Directions for 
Use, Conditions of Warranties and Limitations of Liability before 
using this product. If these terms and conditions are not 
acceptable, return the unopened product container at once. By 
using this product, user or buyer accepts the following Disclaimer 
of Warranties and Limitations of Liability. CONDITIONS: The 
directions for use of this product are believed to be adequate 
and must be followed carefully. However, it is impossible to 
eliminate all risks associated with the use of this 
product. Ineffectiveness, injury, and other unintended 
consequences may result because of such factors as manner of 
use or application (including misuse), the presence of other 
materials, weather conditions, and other unknown factors, all of 
which are beyond the control of ATTICUS, LLC. All such risks shall 
be assumed by the user or buyer. 
DISCLAIMER OF WARRANTIES: To the extent consistent with 
applicable law, ATTICUS, LLC makes no other warranties, express 
or implied, of merchantability or of fitness for a particular 
purpose or otherwise, that extend beyond statements on this 
label. LIMITATIONS OF LIABILITY: To the extent consistent with 
applicable law, neither ATTICUS, LLC the manufacturer, nor the 
Seller shall be liable for any indirect, special, incidental or 
consequential damages resulting from the use, handling, 
application, storage, or disposal of this product. To the extent 
consistent with applicable law, the exclusive remedy of the user 
or buyer for any and all losses, injuries or damages resulting from 
the use, handling, application, or storage of this product, 
whether in contract, warranty, tort, negligence, strict liability or 
otherwise, shall not exceed the purchase price paid. 
 
[A225.05] is a trademark of Atticus, LLC 
Heritage® is a Trademark of a Syngenta Group Company. 
 
 
STORAGE AND DISPOSAL 
Do not contaminate water, food or feed by storage or disposal. 
PESTICIDE STORAGE: Store in original containers only. Keep container closed when not in use. Do not store near food or feed. In 
case of spill on floor or paved surfaces, sweep and remove to chemical waste storage area until proper disposal can be made i f 
product cannot be used according to the label. 
PESTICIDE DISPOSAL: Pesticide wastes are acutely hazardous. Improper disposal of excess pesticide, spray mixture, or rinsate is a 
violation of Federal law. If these wastes cannot be disposed of by use according to label instructi ons, contact your State Pesticide 
or Environmental Control Agency, or the Hazardous Waste representative of the nearest EPA Regional Office for guidance. 
CONTAINER HANDLING: 
Container Handling [less than 50 pounds]: Non-refillable container. Do not reuse or refill this container. Triple rinse container (or 
equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mi x 
tank. Fill the container ¼ full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank 
or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two mor e 
times. Then offer for recycling if available or puncture and dispose of in a sanitary landfill, or by incineration, or by other 
procedures approved by state and local authorities. 
Container Handling [bags]: Non-refillable container. Do not reuse or refill this container. Completely empty bag into application 
equipment. Then offer for recycling if available or dispose of empty bag in a sanitary landfill, or by incineration, or by ot her 
procedures approved by state and local authorities. 
[Nonrefillable Container: Do not reuse or refill this container. Triple rinse or pressure rinse container (or equivalent) promptly 
after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. Fill the cont ainer 
¼ full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete 
revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Turn the container over o nto its 
other end and tip it back and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for 
later use or disposal. Repeat this procedure two more times. Pressure rinse as follows: Empty the remaining contents into 
application equipment or a mix tank. Hold container upside down over application equipment or mix tank or collect rinsate for 
later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 PSI for at least 30 seconds. 
Drain for 10 seconds after the flow begins to drip. Offer for recycling, if available.] 
 
CONTAINER IS NOT SAFE FOR FOOD, FEED, OR DRINKING WATER. 
Formatted: Font: 10 pt
Formatted: Left, Indent: Left: -0.06", Right: -0.11"
Formatted: Font: 10 pt, Font color: Auto
Deleted: ¶

44 
 
{LANGUAGE ON LABEL AFFIXED TO 
CONTAINER} 
 
A225.05[™ ] 
[Alternate Brand Name: Artavia 50 WDG] 
Active Ingredient: (% by weight) 
Azoxystrobin: methyl (E)-2-{2-[6-(2-cyanophenoxy) 
pyrimidin-4-yloxy]phenyl}-3-methoxyacrylate*...........................50.0% 
Other Ingredients ....................................................................... 50.0% 
Total .......................................................................................... 100.0% 
Contains 0.5 pounds azoxystrobin per pound of product. 
*IUPAC 
 
KEEP OUT OF REACH OF CHILDREN 
CAUTION 
Si usted no entiende la etiqueta, busque a alguien para que se la explique a 
usted en detalle. (If you do not understand the label, find someone to explain it 
to you in detail.) 
 
FIRST AID 
If on skin or 
clothing: 
• Take off contaminated clothing. 
• Rinse skin immediately with plenty of water for 15-20 
minutes. 
• Call a poison control center or doctor for treatment advice. 
If in eyes: • Hold eye open and rinse slowly and gently with water for 
15-20 minutes. 
• Remove contact lenses, if present, 
after the first 5 minutes, then 
continue rinsing eye. 
• Call a poison control center or doctor for treatment advice. 
HOT LINE NUMBER 
Have the product container or label with you when calling a poison control 
center or doctor, or going for treatment. You may also contact SafetyCall at 
1-844-685-9173 for emergency medical treatment information. 
 
For Chemical Emergency 
Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night 
Within USA and Canada: 1-800-424-9300 or +1 703-527-3887 (collect calls 
accepted) 
 
PRECAUTIONARY STATEMENTS 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
CAUTION 
Harmful if absorbed through skin. Causes moderate eye irritation. Avoid contact 
with skin, eyes or clothing. Wash thoroughly with soap and water after handling 
and before eating, drinking, chewing gum, using tobacco or using the toilet. 
Remove and wash contaminated clothing before reuse. 
 
ENVIRONMENTAL HAZARDS: This product is toxic to fish. Do not apply directly 
to water, to areas where This pesticide is toxic to freshwater and 
estuarine/marine fish and aquatic invertebrates. Azoxystrobin can be persistent 
for several months or longer. Do not apply directly t o water, or to areas where 
surface water is present, or to intertidal areas below the mean high-water mark. 
Drift and runoff may be hazardous to aquatic organisms in neighboring areas. Do 
not contaminate water when disposing of equipment wash water or rin sate. 
surface water is present, or to intertidal areas below the mean high water mark. 
Do not contaminate water when disposing of equipment washwater or rinsate. 
 
 
Groundwater Advisory 
Azoxystrobin and a degradate of azoxystrobin are known to leach through soil 
to groundwater under certain conditions as a result of label use. This chemical 
may leach into groundwater if used in areas where soils are permeable, 
particularly where the water table is shallow. 
 
Surface Water Advisory 
This product may impact surface water quality due to run-off of rain water. This 
is especially true for poorly draining soils and soils with shallow groundwater. 
This product is classified as having a high potential for reaching surface water 
via run -off for several months or more a fter application. A level, well-
maintained vegetative buffer strip between areas to which this product is 
applied and surface water features, such as ponds, streams and springs, will 
reduce the potential loading of azoxystrobin and a degradate of azoxystrobin 
from run-off water and sediment. Run-off of this product also will be reduced 
by avoiding applications when rainfall or irrigation is expected to occur within 
48 hours. 
Notify state and/or Federal authorities and Atticus immediately if you observe 
any adverse environmental effects due to the use of this product. 
PHYSICAL OR CHEMICAL HAZARDS 
Do not use with or store near any oxidizing or reducing agents. Hazardous 
chemical reaction may occur. 
 
See inside label booklet for additional Precautionary Statements and Directions for Use. 
 
Manufactured for: EPA Reg. No. 91234-47 
Atticus, LLC EPA Est. No. _________ 
5000 CentreGreen Way, Suite 100 
Cary, NC 27513 
NET WEIGHT: 
STORAGE AND DISPOSAL 
Do not contaminate water, food or feed by storage or disposal. 
PESTICIDE STORAGE: Store in original containers only. Keep container closed 
when not in use. Do not store near food or feed. In case of spill on floor or paved 
surfaces, sweep and remove to chemical waste storage area until proper disposal 
can be made if product cannot be used according to the label. 
PESTICIDE DISPOSAL: Pesticide wastes are acutely hazardous. Improper disposal 
of excess pesticide, spray mixture, or rinsate is a violation of Federal law. If these 
wastes cannot be disposed of by use according to label instructions, contact your 
State Pesticide or Environmental Control Agency, or the Hazardous Waste 
representative of the nearest EPA Regional Office for guidance. 
CONTAINER HANDLING: 
Container Handling [less than 50 pounds]: Non-refillable container. Do not reuse 
or refill this container. Triple rinse container (or equivalent) promptly after 
emptying. Triple rinse as follows: Empty the remaining contents into application 
equipment or a mix tank. Fill the container ¼ full with water and recap. Shake for 
10 seconds. Pour rinsate into application equipment or a mix tank or store 
rinsate for later use or disposal. Drain for 10 seconds after the flow begins to 
drip. Repeat this procedure two more times. Then offer for recycling if available 
or puncture and dispose of in a sanitary landfill, or by incineration, or by other 
procedures approved by state and local authorities. 
Container Handling [bags]: Non-refillable container. Do not reuse or refill this 
container. Completely empty bag into application equipment. Then offer for 
recycling if available or dispose of empty bag in a sanitary landfill, or by 
incineration, or by other procedures approved by state and local authorities. 
[Nonrefillable Container : Do not reuse or refill this container. Triple rinse or 
pressure rinse container (or equivalent) promptly after emptying. Triple rinse as 
follows: Empty the remaining contents into application equipme nt or a mix tank. 
Fill the container ¼ full with water. Replace and tighten closures. Tip container on 
its side and roll it back and forth, ensuring at least one complete revolution, for 30 
seconds. Stand the container on its end and tip it back and forth several times. Turn 
the container over onto its other end and tip it back and forth several times. Empty 
the rinsate into application equipment or a mix tank or store rinsate for later use or 
disposal. Repeat this procedure two more times. Pressure rinse as follows: Empty 
the remaining contents into application equipment or a mix tank. Hold container 
upside down over application equipment or mix tank or collect rinsate for later use 
or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at 
about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins to 
drip. Offer for recycling, if available.] 
 
CONTAINER IS NOT SAFE FOR FOOD, FEED, OR DRINKING WATER. 
 
Deleted: ¶
Deleted: ¶
Deleted: ¶
Formatted: Font: 8 pt
Deleted: ¶