crop-chem-docs/corpus/epa_ppls/1381-250.md

# SHREDDER 2,4-D LV6

- EPA Reg No: **1381-250**
- Registrant: WINFIELD SOLUTIONS, LLC
- Signal word: Caution
- Active ingredients: 2,4-D, 2-ethylhexyl ester (88.8%)
- Label accepted: 2017-12-13
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/001381-00250-20171213.pdf

---
December 13, 2017
Subject:
Dear Ms. Mathias:
Sincerely,
Notification Label Acceptable v.20150904
The label submitted with the application has been stamped “Notification” and will be placed in our 
records. The alternate brand name 2,4-D LV6 has been added to the product record.
OFFICE OF CHEMICAL SAFETY 
AND POLLUTION PREVENTION
Kathryn Montague, Product Manager 23 
Herbicide Branch
Registration Division (7505P) 
Office of Pesticide Programs
Should you wish to add/retain a reference to the company’s website on your label, then please be aware 
that the website becomes labeling under the Federal Insecticide Fungicide and Rodenticide Act and is 
subject to review by the Agency. If the website is false or misleading, the product would be misbranded 
and unlawfill to sell or distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) list examples of 
statements EPA may consider false or misleading. In addition, regardless of whether a website is 
referenced on your product’s label, claims made on the website may not substantially differ fiom those 
claims approved through the registration process. Therefore, should the Agency find or if it is brought to 
our attention that a website contains false or misleading statements or claims substantially differing from 
the EPA approved registration, the website will be referred to the EPA’s Office of Enforcement and 
Compliance.
The Agency is in receipt of your Application for Pesticide Notification under Pesticide Registration 
Notice (PRN) 98-10 for the above referenced product. The Registration Division (RD) has conducted a 
review of this request for its applicability under PRN 98-10 and finds that the action requested fails within 
the scope of PRN 98-10.
Lisa Mathias 
Registration Specialist
Winfield Solutions, LLC 
PO Box 64589 
St. Paul, MN 55164-0589
Notification per PRN 98-10 - Minor Label Revisions 
Product Name: SHREDDER 2,4-D LV6
EPA Registration Number: 1381-250
Application Date: 8/8/2017
Decision Niunber: 535504
If you have any questions, you may contact Sarah Meadows at 703-347-0505 or via email at 
meadows.sarah@epa.gov.
___
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY 
WASHINGTON, DC 20460

1
GROUP HERBICIDE
EPA Reg. No. 1381-250 EPA Est. No. 
NET CONTENTS GALLONS
changes, cither than refw; 
the Agencs' h-avc been made i 1/0808/ 71/0313/7
Winfield
4
Personal Protective Equipment
All mixers, loaders, applicators, flaggers, and other handlers must wear:
- Long-sleeved shirt and long pants.
- Chemical-resistant gloves made of any waterproof material when applying with any handheld nozzle or equipment, mixing 
or loading, cleaning up spills or equipment, or otherwise exposed to the concentrate.
- Chemical-resistant apron when mixing or loading, cleaning up spills or equipment, or otheoA'ise exposed© to the 
concentrate.
- Shoes plus socks.
See engineering controls for additional requirements.
Follow manufacturer’s instructions for cleaning or maintaining PPE. If no such instructions for washables exist, use detergent 
and hot water. Keep and wash PPE separately from other laundry.
PRECAUTIONARY STATEMENTS 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION
CAUTION: Harmful if swallowed. Wash thoroughly with soap and water after handling and before eating, drinking, chewing 
gum, using tobacco or using the toilet.
ACTIVE INGREDIENT:
2-ethylhexyl ester of 2,4-dichiorophenoxyacetic acid*
OTHER INGREDIENTS:
Total
* 2,4-DichIorophenoxyacetic acid equivalent 59.1% or 5.6 lbs. per gal.
Distributed By
Winfield Solutions, LLC
P.O. Box 64589, St. Paul, MN 55164-0089
SEE BOOKLET FOR ADDITIONAL PRECAUTIONARY STATEMENTS, COMPLETE DIRECTIONS FOR USE, 
WARRANTY DISLCAIMER AND LIMITATION OF LIABILITY
..88.8%
.11.2%
100.0%
FIRST AID
IF SWALLOWED: Call a poison control center or doctor immediately for treatment advice. Have person sip a glass of 
water if able to swallow. Do not induce vomiting unless told to by a poison control center or doctor. Do not give anything 
by mouth to an unconscious person.___________________________________________________________________
Have the product container or label with you when calling a poison control center or doctor or going for treatment.
For additional information in case of emergency call toll free 1-877-424-7452.
KEEP OUT OF REACH OF CHILDREN 
CAUTION
Solventless Ester Formulation for Agricultural Weed Control, 
Conifer Release, Site Preparation, Turf, and Non-Cropland Weed Control
Shredder® 2,4-D LV6 
[Alternate Brand Name: 2,4-D LV61
NOTIFICATION
1381-250
The applicant h-as certified rbai net 
nited tc* 
few the
labelenp; Th-c .Ageaev ackncwlec^s 
this nciliricaticin br Letter dated: 
12/13/2017

2
USER SAFETY RECOMMENDATIONS
Do not apply this product through any type of irrigation system.
Users should;
- Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet.
- Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
- Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible 
wash thoroughly and change into clean clothing.
Pilots must use an enclosed cockpit that meets the requirements listed in the Worker Protection Standard (WPS) for 
agricultural pesticides [40 CFR 170.240 (d) (6)]. When handlers use closed systems, enclosed cabs, or aircraft, in a manner 
that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d) 
(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS.
This chemical has properties and characteristics associated with chemicals detected in groundwater. The use of this 
chemical in areas where soils are permeable, particularly where the water table is shallow, may result in groundwater 
contamination. Application around a cistern or well may result in contamination of drinking water or groundwater.
Engineering Controls
{(STATEMENT TO BE ADDED WHEN CONTAINER SIZE IS 5 GALLON OR MORE)
Do not pour product from this container. A mechanical system (pump and probe or spigot) must be used in transferring the 
contents of this container. If the contents of a non-refillable pesticide container are emptied, the probe must be rinsed before 
removal. If the mechanical system is used in a manner that meets the requirements listed in the Worker Protection Standard 
(WPS) for agricultural pesticides [40 CFR 170.240 (d) (4-6)], the handler PPE requirements may be reduced or modified as 
specified in the WPS.]
ENVIRONMENTAL HAZARDS
This product is toxic to fish and aquatic invertebrates. Do not apply directly to water, to areas where surface water is present, 
or to intertidal areas below mean high water mark. Drift and runoff may be hazardous to aquatic invertebrates in water 
adjacent to treated areas. Drift or runoff may adversely affect non-target plants. Do not contaminate water when disposing of 
equipment washwaters or rinsate.
DIRECTIONS FOR USE
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. Do not apply this product in away 
that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during 
application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation.
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170. This 
Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhousesand 
handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency 
assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal 
protective equipment (PPE) and restricted-entry interval. The requirements in this box apply only to uses of this product that 
are covered by the Worker Protection Standard.
Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 12 hours. 
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves 
contact with anything that has been treated, such as plants, soil, or water is;
- Coveralls.
- Chemical resistant gloves made of any waterproof material.
- Shoes plus socks.
Use of this product in certain portions of California, Oregon and Washington is subject to the January 22, 2004 Order for 
injunctive relief in Washington Toxics Coalition, et al. v. EPA, C01-0132C, (W.D. WA). For further information, please 
refer to EPA Web Site; http;//www.epa.gov/espp.
Most cases of groundwater contamination involving phenoxy herbicides such as 2,4-D have been associated with 
mixing/loading and disposal sites. Caution should be exercised when handling 2,4-D pesticides at such sites to prevent 
contamination of groundwater supplies. Use of closed systems for mixing or transferring this pesticide will reduce the 
probability of spills. Placement of mixing/loading equipment on an impervious pad to contain spills will help prevent 
groundwater contamination.

3
Do not enter or allow people or pets to enter the treated area until sprays have dried.
WEED LIST
This product will control these plants and other 2,4-D susceptible species:
NON-AGRICULTURAL USE REQUIREMENTS
The requirements in this box apply to uses of this product that are NOT within the scope of the Worker Protection 
Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce 
agricultural plants on farms, forests, nurseries, or greenhouses.
ANNUAL AND BIENNIAL WEEDS
Annual fanweed (field pennycress), annual yellow sweet clover, * beggarticks, bull thistle, burdock, carpetweed, chickweed, 
cocklebur, coffeeweed, common mullein, common evening primrose, cornflower, croton, galinsoga, goatsbeard, hemp, henbit, 
horseweed (marestail), jewelweed, jimsonweed * knotweed, * kochia, lambsquarters, mallow (Venice, dwarf, little), 
marshelder, morningglory (common, ivy, woolly), musk thistle, mustards (except blue), pennycress, pepperweed (field), 
** pigweeds, poorjoe (wooly plantain), * prickly lettuce, puncturevine, purslane, ragweed (common and giant), rough fleabane, 
Russian thistle, salsify, shepherdspurse, stinkweed, * smartweeds (annual), sowthistle (annual or spiny), sunflower, 
tansymustard, tumbleweed, velvetleaf, vetches, water primrose, * wild carrot, wild lettuce, wild parsnips, wild radish, wild 
sweet potato.
PERENNIAL WEEDS
* Alfalfa, * bindweeds (hedge, field and European), blue lettuce, * broom snakeweed, buckhorn plantain, buttercup,* Canada 
thistle, catnip, chamise, chicory, climbing milkweed, curly indigo, dandelion, * docks, * dogbanes, * goldenrod, * ground ivy,
* hawkweed (orange), * hoary cress, * Jerusalem artichoke, locoweed, * many-flowered aster, milkvetch, * nettles, nutgrass, 
plantains, poison ivy, pokeweed, sheep sorrel, sicklepod, sneezeweed (bitter), sowthistle (perennial), * tansy ragwort, 
*vervains, * wild garlic, * wild onion, witchweed, wormwood, yellow rocket, yellow starthistle.
STORAGE AND DISPOSAL
Do not contaminate water, food or feed by storage and disposal.
PESTICIDE STORAGE: Store in a secure area, in original container only. Do not store near feed or foodstuffs. When stored 
at temperatures below freezing, it may be necessary to warm contents to 70° F and mix thoroughly before using.
PESTICIDE DISPOSAL: Pesticide wastes are toxic. Improper disposal of excess pesticide, spray mixture, or rinsate is a 
violation of Federal Law and may contaminate groundwater. If these wastes cannot be disposed of by use according to label 
instructions, contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste representative at the 
nearest EPA Regional Office for guidance.
CONTAINER DISPOSAL: Use label language appropriate for container size and type.
Nonrefillable containers. Do not reuse or refill this container. Clean container promptly after emptying.
Nonrefillable container equal to or less than 5 gallons. Triple rinse as follows: Empty the remaining contents into 
application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container V a full with water 
and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or 
disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Offer for recycling or 
reconditioning, or puncture and dispose of in a sanitary landfill, or by other procedures approved by state and local authorities, 
such as burning of plastic containers. If burned, stay out of smoke.
Nonrefillable container greater than 5 gallons. Triple rinse as follows: Empty the remaining contents into application 
equipment or a mix tank. Fill the container V a full with water. Replace and tighten closures. Tip container on its side and roll it 
back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and 
forth several times. Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into 
application equipment or a mix tank or store rinsate for later use of disposal. Repeat this procedure two more times. Offer for 
recycling or reconditioning, or puncture and dispose of in a sanitary landfill, or by other procedures approved by state and local 
authorities, such as burning of plastic containers. If burned, stay out of smoke.
Refillable container. Refill this container with pesticide only. Do not reuse this container for any other purpose. Cleaning the 
container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the 
responsibility of the refiller. To clean the container before final disposal, empty the remaining contents from this container into 
application equipment or mix tank. Fill the container about 10 percent full with water. Agitate vigorously or recirculate water 
with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing 
procedure two more times. Offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill, or by other 
procedures approved by state and local authorities, such as burning of plastic containers. If burned, stay out of smoke.
FOR CHEMICAL EMERGENCY: Spill, leak, fire, exposure or accident, call 
CHEMTREC 1-800-424-9300.

4
Droplet Size
When applying sprays that contain 2,4-D as the sole active ingredient, or when applying sprays that contain 2,4-D mixed with 
active ingredients that require a Coarse or coarser spray, apply only as a Coarse or coarser spray {ASAE standard 572) or a 
volume mean diameter of 385 microns or greater for spinning atomizer nozzles.
When applying sprays that contain 2,4-D mixed with other active ingredients that require a Medium or more fine spray, apply 
only as a Medium or coarser spray (ASAE standard 572) or a volume mean diameter of 300 microns or greater for spinning 
atomizer nozzles.
2,4-D esters may volatilize during conditions of low humidity and high temperatures. Do not apply during conditions of low 
humidity and high temperatures.
Wind Speed
Do not apply at wind speeds greater than 15 mph. Only apply this product if the wind direction favors on-target deposition and 
there are not sensitive areas (including, but not limited to, residential areas, bodies of water, known habitat for non-target 
species, non-target crops) within 250 feet downwind. If applying a Medium spray, leave one swath unsprayed at the 
downwind edge of the treated field.
To delay herbicide resistance consider:
• Avoiding the consecutive use of Shredder 2,4-D LV6 or other target site of action Group 4 herbicides that have a 
similar target site of action, on the same weed species.
• Using tank-mixtures or premixes with herbicides from different target site of action Groups as long as the involved 
products are all registered for the same use, have different sites of action, and are both effective at the tank mix or 
prepack rate on the weed(s) of concern.
• Basing herbicide use on a comprehensive IPM program.
• Monitoring treated weed populations for loss of field efficacy.
• Contacting your local extension specialist, certified crop advisors, and/or Winfield Solutions, LLC representative for 
herbicide resistance management and/or integrated weed management recommendations for specific crops and 
resistant weed biotypes.
Temperature Inversions
If applying at wind speeds less than 3 mph, the applicator must determine if:
a) conditions of temperature inversion exist, or
b) stable atmospheric conditions exist at or below nozzle height. Do not make applications into areas of temperature
SPRAY DRIFT MANAGEMENT
A variety of factors including weather conditions (e.g., wind direction, wind speed, temperature, and relative humidity) and 
method of application (e.g., ground, aerial, airblast) can influence pesticide drift. The applicator must evaluate all factors and 
make appropriate adjustments when applying this product.
RESISTANCE MANAGEMENT RECOMMENDATIONS
Shredder 2,4-D LV6 is a Group 4 herbicide. Any weed population may contain or develop plants naturally resistant to 
Shredder 2,4-D LV6 or other Group 4 herbicides. Weed species with acquired resistance to Group 4 may eventually 
dominate the weed population if Group 4 herbicides are used repeatedly in the same field or in successive years as the 
primary method of control for targeted species. This may result in partial or total loss of control of those species by Shredder 
2,4-D LV6 or other Group 4 herbicides.
USE DIRECTIONS
Unless noted otherwise under individual DIRECTIONS section, for aerial application, apply the specified amount in a 
minimum of 2 gallons of water per acre. For ground application, apply the specified amount in a minimum of 3 gallons of water 
per acre. Use more water for both methods when adverse growing conditions are present. Do not apply with high spray 
pressures, hollow cone or other nozzle types that produce small spray droplets which may drift. The use of a suitable drift 
control agent at the proper rate will aid in the reduction of spray drift. Apply when weather is warm and plants are rapidly 
growing. Cold weather or dry conditions may cause poor results. Do not apply if rain is expected within an hour. Consult your 
local agronomist or Extension specialist for specific use and crop tolerance situations.
*BRUSH
Boxelder, buckbrush, coyotebrush, elderberry, manzanita, rabbitbrush, sagebrush (coastal, big, sand), sand shinnery oak, 
sumac, willow.
* These species may require repeat treatments and/or the higher specified rate. ** Control of pigweeds in the Texas and 
Oklahoma High Plains may be difficult.

5
inversions or stable atmospheric conditions.
Additional requirements for aerial applications:
Additional requirements for ground boom application:
Do not apply with a nozzle height greater than 4 feet above the crop canopy.
Other State and Local Requirements
Applicators must follow all state and local pesticide drift requirements regarding application of2,4-D herbicides. Where states 
have more stringent regulations, they must be observed.
The boom length must not exceed 75% of the wingspan or 90% of the rotor blade diameter. Release spray at the lowest 
height consistent with efficacy and flight safety. Do not release spray at a height greater than 10 feet above the crop canopy 
unless a greater height is required for aircraft safety. This requirement does not apply to forestry or rights-of-way applications. 
When applications are made with a crosswind, the swath will be displaced downwind. The applicator must compensate for 
this by adjusting the path of the aircraft upwind.
WATER AND SOYBEAN OIL OR PETROLEUM OIL-BASED SPRAY- First mix this product with the oil; then add to water. 
If vigorous agitation is possible, the oil can be added last. DO NOT ADD OIL FIRST!
SOYBEAN OIL OR PETROLEUM OIL-BASED SPRAY: Add this product to straight oil to form a solution. Do not allow water 
to get into this mixture, if it does, an invert emulsion will occur.
Wash spray equipment thoroughly with a tank cleaner after using this product. When cleaning equipment, do not pour 
washwater on the ground; spray or drain over a large area away from wells or other water sources. Apply the recommended 
amount of 2,4-D per acre regardless of the amount of diluent used.
NITROGEN FERTILIZER: Weed and feed applications for corn, small grains, grasses grown for seed or grass pastures 
according to label use rates. - Add halfthe fertilizer to the tank; then add recommended label amount of this product per acre. 
Agitate constantly and vigorously and finish filling spray tank with fertilizer. Apply as soon as possible, agitating constantly. 
Do not hold spray mixture overnight. If incompatibility is a problem, the use of a compatibility agent at the recommended label 
rate may correct the problem. Fertilize according to the recommendations of your supplier or your Extension specialist. 
Herbicide foliage contact burning may occur as a result of fertilizer use. Lower use ratesand concentrationswill reduce this 
problem.
Susceptible Plants
Do not apply under circumstances where spray drift may occur to food, forage, or other plantings that might be damaged or 
crops thereof rendered unfit for sale, use or consumption. Susceptible crops include, but are not limited to, cotton, okra, 
flowers, grapes (in growing stage), fruit trees (foliage), soybeans (vegetative stage), ornamentals, sunflowers, tomatoes, 
beans, and other vegetables, or tobacco. Small amounts of spray drift that might not be visible may injure susceptible 
broadleaf plants.
Equipment
All aerial and ground application equipment must be properly maintained and calibrated using appropriate carriers or 
surrogates.
Adjuvants for Preemergence and Preplant Applications: A non-ionic surfactant or a crop oil concentrate may be 
added to the spray solution when this product is applied preemergence or preplant to increase control of large or difficult 
to control weeds. Crop oil concentrates must contain at least 17% emulsifier, and should be used at 1% volume/volume 
(1 gallon per 100 gallons of spray solution). Non-ionic surfactants should be used at 0.25% volume/volume (1 quart per
100 gallons of spray solution). When an adjuvant is to be used with this product, Winfield Solutions, LLC recommends 
the use of a Council of Producers & Distributors of Agrotechnology Chemical Producers and Distributors Association 
certified adjuvant.
MIXING INSTRUCTIONS
WATER BASED SPRAY - Fill the equipment half full of water, agitate while adding this product; then add the rest of water.
TANK MIXES
It is the pesticide user’s responsibility to ensure that all products used in tank mixtures are registered for the intended use. 
Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.

6
RATE PER ACRE
3/4 pint
3/4 to 1-1/3 pints
1-1/3 pints
1/3 pint
Perennial broadleaf weeds 2/3 pint **
Postemergence - Annual 
broadleaf weeds
Apply after silks are completely brown to reduce weeds that interfere 
with harvest and reduce weed seed production. Do not apply to sweet 
corn.
Apply after corn is planted but before emergence for control of 
emerged broadleaf weeds. The seed furrow must be completely 
closed at application or severe crop injury may result.
2/3 to 1-1/3 
pints *
DIRECTIONS
Planting of corn must be delayed a minimum of 7 days after 
application at rates upto 1 pint per acre, and a minimum of 14 days at 
rates from 1 to 1-1/2 pints per acre. Planting sooner after application 
than specified on this label may result in unacceptable crop injury.
CORN - all corn including FIELD, SWEET AND POP
WEEDS
Preplant-
Annual and biennial broadleaf
seedlings
Perennial weed seedlings and
existing cover crops
• Do not perform tillage for at least 7 days after application. Do not use on sandy soils or unacceptable crop injury may result. 
Preemergence and reduced
tillage.-Broadleaf weeds and
annual grasses.
• Use higher rate on soils high in organic matter. Do not use on sandy soils or unacceptable crop injury may result.
Apply when corn is less than 8 inches tall, but to avoid crop injury do
not apply just after leaves have unfolded. If corn is over 8 inches tall, 
use drop nozzles to keep spray off of corn foliage as much as 
possible. See additional restrictions below.
Apply when weeds are in bud to bloom stage. If com is over 8 inches 
tall, use drop nozzles to keep spray off corn foliage as much as 
possible.
Sweet Corn: To minimize potential for crop injury, use only lowest 
rate in rate range.
** DO NOT apply from 2 weeks before tasseling to dough stage. DO NOT apply to open whorls. To avoid injury, do not use 
with atrazine, oil or other adjuvants. Application during high moisture and temperature conditions may cause injury or 
brittleness. DO NOT cultivate for a week to 10 days after treatment or stalk breakage may occur.
Late season weed control
Preharvest (Field corn and
popcorn only)
• Use lower rate for small annual and biennial weeds. Use the higher rate for perennial and larger hard-to-kill annual and 
biennial weeds.
RESTRICTIONS AND LIMITATIONS FOR FIELD CORN AND POPCORN;
• Do not use treated crop as fodder for 7 days following application.
• The preharvest interval (PHI) is 7 days.
• Maximum of 4.28 pts. (3 lbs. ae) per acre per crop cycle.
• Preplant or preemergence;
Limited to one preplant or preemergence application per crop cycle.
Maximum of 1.42 pts. (1 lb. ae) per acre per application.
• Postemergence;
Limited to one postemergence application per crop cyde.
Maximum of 0.7 pt. (1/2 lb. ae) per acre per application.
• Preharvest;
Limited to one preharvest application per crop cycle.
Maximum of 2.14 pts. (1 1/2 lbs. ae) per acre per application.
RESTRICTIONS AND LIMITATIONS FOR SWEET CORN;
• Do not use treated crop as fodder for 7 days following application.
• The preharvest interval (PHI) is 45 days.
• Minimum of 21 days between applications.
• Maximum of 2.14 pts. (1 1/2 lbs. ae) per acre per crop cycle.
• Preplant or preemergence;
Limited to one preplant or preemergence application per crop cycle.
Maximum of 1.42 pts. (1 lb. ae) per acre per application.
• Postemergence;
Limited to one postemergence application per crop cyde.
Maximum of 0.7 pt. (1/2 lb. ae) per acre per application.

7
2/3 pint
Amount 
Per Acre
SORGHUM-SUDAN GRASS HYBRIDS 
(Forage Crop Only):
5 to 11.4 fluid 
ounces
DIRECTIONS
To control small broadleaf weeds, apply when sorghum-sudan has at least 6 
leaves, is well established, and is 5 to 10 inches tall.
WEEDS
Annual broadleaf weeds
(Postmergence) and
Perennial broadleaf weeds
(Postmergence)
Plant Response: Even when sprayed at the proper stage, some crop injury is likely, including reduced seed production. If 
risk of crop injury is unacceptable, do not use this product. The lower rate may reduce the risk of crop injury, but will result in 
reduced weed control.
SOYBEANS 
WEEDS
Preplant - Emerged 
broadleaf weeds.
GRAIN SORGHUM 
WEEDS I
Annual broadleaf 
weeds
Perennial 
broadleaf weeds
RATE PER ACRE
1/2 pint
RATE PER ACRE
2/3 to 1-1/3 pints
DIRECTIONS
Apply to plants that are 5 to 15 inches tall. DO NOT treat plants less than 5 
inches tall or from boot to early dough stage. Use drop nozzles when crop is 8 
inches or taller.
The higher rate may be needed for some weeds, but chances of crop injury may 
increase.
DO NOT use oil. Some varieties and hybrids are 2,4-D sensitive. Crop injury may also be increased by high moisture and 
temperature conditions. Check with your seed company and Extension Service for advice.
RESTRICTIONS AND LIMITATIONS FOR GRAIN SORGHUM:
• The preharvest interval (PHI) is 30 days.
• Do not permit meat or dairy animals to consume treated crop as fodder or forage for 30 days following application.
• Postemergence;
Limited to 1 application per crop cycle.
Maximum of 0.7 pt. (1/2 lb. ae) per acre per application.
DIRECTIONS
After applying, plant soybean seed as deep as practical or at least 1-1/2 to 2 
inches deep. Seed furrow must be completely closed or severe crop injury 
will result.
USE RESTRICTIONS AND LIMITATIONS FOR SOYBEANS: Do not perform tillage for at least 7 days after application. Do 
not use on sandy soils or unacceptable crop injury may result. Do not replant treated fields in the same growing season with 
crops that are not labeled for 2,4-D preplant use.
• The maximum rate per crop cycle is 1.43 pints (1 lbs. ae) per acre.
• Preplant:
Limited to 2 preplant applications per crop cycle.
Maximum of 0.7 pint (1/2 lb. ae) per acre per preplant application.
Apply not less than 7 days prior to planting soybeans.
OR
• Preplant:
Limited to 1 application per crop cycle.
Maximum of 1.43 pints (1 lb. ae) per preplant application.
Apply not less than 15 days prior to planting soybeans.
PRECAUTIONS FOR PLANTING SOYBEANS: If product is applied at the higher limit of listed rates and if soil 
temperatures have been cold and/or soils have been excessively wet or dry in the days following application, risk of crop 
injury is increased.

8
Perennial broadleaf weeds2/3 to 1-1/3 pints **
1/3 to 2/3 pint**
1 to 1-1/3 pints *
Spring-seeded oats 1/3 to 1/2 pint*
Apply at full tiller, but before early boot stage {Zadoks 25 to 4o).1/2 to 1 pint*
2/3 to 1-1/3 pints*
5.7 to 11.4 
fluid ounces
Apply when grain is in hard dough stage (Zadoks 8? ) to control 
weeds that will interfere with harvest. Apply when soil moisture is 
adequate for weed growth for best results.
RESTRICTIONS AND LIMITATIONS FOR SORGHUM-SUDAN GRASS HYBRIDS:
• Do not treat crop over 10 inches tall through maturity.
• The preharvest interval (PHI) is 30 days.
• Do not permit meat or dairy animals to consume treated crop as fodder or forage for 30 days following application.
• Postemergence;
Limited to 1 application per crop cycle.
Maximum of 11.4 fluid ounces (0.5 lb. ae) per acre per application.
Apply 1 pint rate when grain is at full tiller and wild garlic and onion 
plants are small. Apply 1-1/3 pints after the harvest to the crop 
stubble. For control of new fall growth of these plants, refer to the 
fallow land use directions.
Apply at full tiller, but before early boot stage (Zadoks 25 to 4o).
DIRECTIONS
To control small broadleaf weeds, apply when sorghum-sudan has at least 6 
leaves, is well established, and is 5 to 10 inches tall.
Apply only in the spring when crop is fully tillered, but before grain is 
in boot stage (before Zadoks 4o). For improved control of difficult 
weeds, apply up to 2 pints per acre.
** DO NOT USE THE HIGHER RATE IF POSSIBLE CROP DAMAGE IS NOT ACCEPTABLE
Wild garlic or onions
DIRECTIONS
Apply when grain is in full tiller stage (4 to 8 inches high) but before 
boot stage (Zadoks 25 to 4o) when weeds are small and actively 
growing. Up to 1-1/3 pints per acre may be used to control difficult 
weed problems, but do not use unless some crop damage is 
acceptable.
Apply only in the spring when crop is fully tillered, but before grain is 
in boot stage (before Zadoks 4o). For improved control of difficult 
weeds, apply up to 2 pints per acre.
** DO NOT USE THE HIGHER RATE IF POSSIBLE CROP INJURY IS NOT ACCEPTABLE
Use in combination with a product of a different mode of action to control resistant weeds 
such as kochia and Russian thistle. Follow application directions on each product label.
SORGHUM-SUDAN GRASS
{POSTEMERGENCE APPLICATION RATE)
Amount
Per Acre
Spring and winter wheat and 
barley
Resistant weeds
Winter wheat and rye 
Annual weeds
Fall seeded oats grown for
grain (Southern)
* Difficult to control weeds may require higher rate, but some injury may occur since oats are less tolerant to 2,4-D than 
wheat or barley. DO NOT spray during or just after cold weather.
Preharvest - Cereal grains
RATE PER ACRE
1/3 to 1-1/3 pints*
WEEDS
Annual broadleaf weeds
(Postmergence) and
Perennial broadleaf weeds
(Postmergence)
Plant Response: Even when sprayed at the proper stage, some crop injury is likely, including reduced seed production. If risk 
of crop injury is unacceptable, do not use this product. The lower rate may reduce the risk of crop injury, but will result in 
reduced weed control.
RESTRICTIONS AND LIMITATIONS FOR SORGHUM-SUDAN GRASS:
• Do not treat crop over 10 inches tall through maturity.
• The preharvest interval (PHI) is 30 days.
• Do not permit meat or dairy animals to consume treated crop as fodder or forage for 30 days following application.
SMALL GRAINS -Not underseeded with legumes
WEEDS
Postemergence - Spring
wheat, barley, and rye
Annual and biennial weeds

Biennial weeds 1-2/3 to 2-2/3 pints
Perennial weeds 1-2/3 to 2-2/3 pints
2-2/3 pints
2-3/4 pints** Buckbrush, 
coyotebrush, 
rabbitbrush,
sagebrush, and other 
chaparral species
____________________________________________________________________________________________________________________9______________
• Use the lower rate for small annual and biennial weeds. Use the higher rate for perennial weeds or hard-to-kill annual or biennial weeds. 
The higher rate should be used only where heavy weed infestation is a problem and increased risk of crop damage is acceptable. 
RESTRICTIONS AND LIMITATIONS FOR SMALL GRAINS;
• The preharvest interval (PHI) is 14 days.
• Postemergence;
Limited to one postemergence application per crop cycle.
Maximum of 1,78 pts. (1 1/4 lbs. ae) per acre per application.
• Preharvest;
Limited to one preharvest application per crop cycle.
Maximum of 0,7 pt. (1/2 lbs. ae) per acre per application.
• Limited to 2.5 pts. (1 3/4 lbs, ae) per acre per crop cycle.
or postharvest to crops, or between crops)____________________
DIRECTIONS
Use the lower rate on small actively growing weeds. Use the higher rate 
on larger or weather stressed weeds.
Use the lower rate in the Spring on biennial weeds such as the musk 
thistle during the rosette stage before stalks have formed. Use the higher 
rate after stalk formation or in the Fall.
Apply during the bud to bloom stage while weeds are actively growing. Do 
not till for 2 weeks after treatment or until the weeds start to die. 
Apply to regrowth in fall after harvest.
CONSERVATION RESERVE PROGRAM AREA PASTURES AND RANGELAND NOT IN AGRICULTURAL PRODUCTION 
DIRECTIONS
Do not apply after heads form or when grass is in boot to milk stage when a 
seed crop is desired. DO NOT use on alfalfa, clover, other legumes, or 
newly seeded pastures. For aerial application, apply the recommended 
amount in a minimum of 2 gallons of water per acre. For ground 
application, use a minimum of 10 gallons of water per acre.
Apply in 5 to 10 gallons of water plus 1 gallon of oil or 1-2 quarts of a crop 
oil concentrate with at least 17 % emulsifiers, per acre or a non-ionic 
surfactant at .25% v/v surfactant to water — (1 quart per 100 gallons of 
water) per acre.
Wild onions and garlic
RESTRICTIONS AND LIMITATIONS FOR FALLOW GROUND (crop stubble on idle land, or postharvest to crops, or 
between crops;
• Plant only labeled crops within 29 days following application.
• Limited to 2 applications per year.
• Maximuim of 2.8 pts. (2 lbs. ae) per acre per application.
• Minimum of 30 days between applications.
PLANTING IN TREATED AREAS;
Labeled Crops: Within 29 days after an application of this product, plant only those crops listed on this or other registered
2,4-D labels. Follow more specific limitations, if any, provided in directions for specific crops. Labeled crops may be at risk 
of crop injury or loss if planted soon after application, especially during the first 14 days. Degradation factors described 
below should be considered in weighing this risk.
Other Crops: All other crops may be planted 30 or more days after application without concern for illegal residues in the 
planted crop. However, under certain conditions, there may be a risk of injury to susceptible crops. Degradation factors 
described below should be considered in weighing this risk. Under normal conditions, any crop may be planted without risk 
of injury if at least 90 days of soil temperatures above freezing have elapsed since application.
Degradation Factors: When planting into treated areas, the risk of crop injury is less if lower rates of product were applied 
and conditions following application have included warm, moist soil conditions that favor rapid breakdown of 2,4-D. Risk is 
greater if higher rates of product were applied and soil temperatures have been cold and/or soils have been excessively wet 
or dry in the days following application. Consult your local agricultural extension service for information about susceptible 
crops and typical conditions in your area.
Precautions for Planting Cotton: Following application of this product and following a minimum of 1” rainfall or irrigation in 
a 24 hr. period, wait an interval of 30 days prior to planting cotton. Failure to observe these precautions may result in crop 
injury.
RATE PER ACRE
2/3 to 1-2/3 pints
RATE PER ACRE
1-1/2 to 2-3/4 pints
FALLOW GROUND (crop stubble on idle land 
WEEDS
Annual broadleaf weeds
WEEDS
Annual broadleaf 
weeds and * perennial 
weeds

2-3/4 pints** Sand shinnery oak
Alder
4 to 5-1/3 pints
2 to 4 pints
0.7 ml per injection
Alder, cascara, cherry,4 pints
Oaks, hickory, maple, 
pecan, elm, sumac, 
sweetgum, hawthorn, 
and other hardwoods
PASTURES AND RANGELAND (established grass pastures, rangeland, and perennial grasslands not in agricultural 
production, excluding Conservation Reserve areas)___________________________________________________
For susceptible annual and biennial broadleaf weeds; Do not apply more than 1.4 pts (1 lb. ae) per acre per application. 
For moderately susceptible biennial and perennial broadleaf weeds and difficult to control weeds and woody plants; Do not 
apply more than 2.8 pts (2 lbs. ae) per acre per application.
For spot treatment; Do not apply more than 2.8 pts (2 lbs. ae) per acre.
RESTRICTIONS AND LIMITATIONS FOR PASTURES AND RANGELAND;
• Do not cut forage for hay within 7 days of application.
• Maximum of two applications per year.
• Do not apply more than 4 lbs. ae/acre per year.
• The minimum retreatment interval is 30 days.
Ceanothus spp., 
chinquapin, madrone 
manzanita, oak, 
tanoak and other 
susceptible brush 
species
Alder, aspen, birch, 
hazel, willow and other 
competing hardwood 
species
DIRECTIONS
Conifer Release; Apply as a foliage spray in 8 to 25 gallons of water. Treat 
when % of the brush foliage has attained full size leaves and before new 
conifer growth reaches 2” in length. This is usually between early May and 
mid-June. Adjust treatment date depending on stage of growth and brush 
species. This may cause leader deformation on exposed firs, but they 
should overcome this during the second year after spraying.
Conifer Release; To control susceptible brush species and to release 
Douglas fir, hemlock, sitka spruce or grand fir, apply up to 2 qts. per acre 
before new growth on Douglas fir is 2” long. To control manzanita and 
ceanothus in ponderosa pine, apply 2 to 2-2/3 qts. per acre before pine 
growth begins in spring. To increase performance, add 2 to 4 qts. of diesel, 
fuel oil, kerosene, or a suitable approved agricultural surfactant at 
recommended label rate.
Apply as a foliage spray in 8 to 25 gallons water after northern conifers, 
jack pine, red pine, black spruce, and white spruce cease growth and 
“harden off” (usually in mid-July). Since this treatment may cause 
occasional conifer injury, do not use if such injury cannot be tolerated. 
Consult your regional or extension forester or state herbicide specialist for 
recommendations to fit local conditions.
Tree Injections (pine release); Apply undiluted product in a concentrate tree 
injector calibrated to apply 0.7 ml per injection. Space injections 2” apart, 
edge to edge, completely around the tree and close to the base. The 
injector bit must penetrate the inner bark. On hard-to-kill species such as 
hickory, dogwood, red maple, blue beech and ash, make injections 1-1/2” 
apart, edge to edge. Treatment may be made at any time of the year. For 
best results, injections should be made during growing season. May 15- 
October15. For dilute injections, mix 2/3 gal. of product in 19 gals, of water. 
Dormant Application (other than pine); Apply up to 2 qts. per acre in
10
Apply in 5 gallons of oil or 4 gallons of water plus 1 gallon of oil or 1-2 
quarts of a crop oil concentrate with at least 17 % emulsifiers, per acre or a 
non-ionic surfactant at .25% v/v surfactant to water - (1 quart per 100 
gallons of water) per acre.
• Deep-rooted perennial weeds may require the higher rate or repeated treatments. ** Woody plants and any regrowth may 
require repeat treatments.
RESTRICTIONS AND LIMITATIONS FOR PASTURES, RANGELAND, AND PROGRAM AREAS;
• The preharvest interval (PHI) is 7 days (cut forage for hay).
• Postemergence;
Limited to 2 applications per year.
Maximum of 2.8 pts (2 lbs. ae) per acre per application.
Minimum of 30 days between applications.
If grass is to be cut for hay. Agricultural Use Requirements for the Worker Protection Standard are applicable. 
For program lands, such as Conservation Reserve Program, consult program rules to determine whether grass or hay 
may be used. The more restrictive requirements of the program rules or this label must be followed.
USES IN FOREST MANAGEMENT 
WEEDS RATE PER ACRE
1-1/3 to 4 pints

2-2/3 pints
1-1/3 to 4 pints
2-1/3 to 5-1/3 pints
2-1/3 to 5-1/3 pints
2/3 to 1-1/3 pints
WEEDS DIRECTIONS
Annual broadleaf weeds Apply when weeds are young and growing vigorously.
5-1/3 pints
Perennial and biennial 
broadleaf weeds
___________________________________________________________11____________ 
sufficient diesel, fuel oil or kerosene for good coverage. Application may be 
made by ground or air and should be made before conifer bud break.
NON-CROP AREAS - Fence Rows, Hedgerows, Roadsides, Ditches, Rights-of-Way, Airfields, Railroad, Highway and Utility 
Rights-of-Way, Industrial Sites, and Other Non-Crop Areas.
Spot Treatment: To control broadleaf weeds or brush in non-cropland areas, apply 4 fl. oz. in 3 gallons of water, mixing 
thoroughly, and spray to run-off. This high dosage rate may only be used where injury can be tolerated.
False dandelion, 
klamath weed, plan­
tain, tansy ragwort, 
and other over-winter­
ing susceptible weeds 
Alder
Tansy ragwort and musk thistle 
Wild onion and wild garlic 
Woody plants - Ground
2 to 2-2/3 pints Spray perennial weeds when near the bud stage, but not flowering. Do 
not use on St. Augustine grass. Bentgrass, clover, legumes and 
dichondra may be injured. Do not apply to newly seeded areas until grass 
is well established. Deep-rooted perennials may require repeated 
treatments.
Apply in rosette stage before bolting.
Treat in the early spring and fall when young and actively growing.
Apply in 20 to 100 gallons of water. For increased effectiveness, add a
poplar, serviceberry 
and other susceptible 
deciduous brush 
species
Broadleaf weeds {See 
“Weed List”)
Dormant Application (pine only): Make application while pine buds are still 
dormant. Apply in sufficient water for good coverage by air or ground 
equipment. Do not use this application unless some pine injury is 
acceptable. Use of diesel, kerosene, or other oil, or addition of surfactants 
to spray mix may cause unacceptable pine injury.
Herbaceous Weed Control: Apply in sufficient water for good coverage. 
Make application at rates and timing indicated above if pines are present. 
For control of hazel brush and similar species in the Lake States area, 
apply 1-1/3 quarts per acre in 8 to 25 gals, of water, when new shoot 
growth of hazel is complete (usually mid-July).
Site Preparation (as dormant spray); Prior to planting seedlings, apply in 
diesel, fuel oil, or similar oil before foliage is Vi full size. Application maybe 
made by air or ground.
Site Preparation (as foliage spray); Prior to planting seedlings, apply in 8 to 
25 gals, of water after most alder leaves are full size. To increase 
penetration, 2 to 4 qts. per acre of diesel, fuel oil, kerosene or a suitable 
approved agricultural surfactant at recommended label rates may be added 
to the spray mixture.
ChristmasTree Plantations; In Douglas fir Christmas trees, apply over the 
top by ground or aerial application equipment only when the trees are 
dormant, prior to bud break. Do not spray over the top of pine or true firs 
{Abies spp.). Directed sprays may be made to weeds in Christmas tree 
plantations of all conifer species, but the spray must not contact tree foliage 
as injury may occur. Do not apply to weakened, diseased, or stressed 
seedlings since unacceptable injury may occur. This product may be mixed 
with atrazine for Christmas tree application. Read and follow the atrazine 
label used for precautionary statements, directions for use, geographic and 
other restrictions.
RESTRICTIONS AND LIMITATIONS FOR USES IN FOREST MANAGEMENT:
• Broadcast application:
Limited to one broadcast application per year.
Maximum of 5.7 pints (4 lbs. ae) per acre per broadcast application.
• Injection:
Limited to one injection application per year.
Maximum of 1-1/3 ml of 6 lbs. ae formulation per injection site.
RATE PER 
ACRE
1-1/3 to 2-2/3 
pints

application
TURF GROWN FOR SEED OR SOD (DO NOT USE IN CALIFORNIA)
1-1/3 to 2 pints*
1-1/3 pints
Biennial and perennial 
weeds
WARRANTY DISCLAIMER
The directions for use of this product must be followed carefully. TO THE EXTENT CONSISTENT WITH APPLICABLE 
LAW, (1) THE GOODS DELIVERED TO YOU ARE FURNISHED “AS IS” BY MANUFACTURER OR SELLER AND (2) 
MANUFACTURER AND SELLER MAKE NO WARRANTIES, GUARANTEES, OR REPRESENTATIONS OF ANY KIND 
TO BUYER OR USER, EITHER EXPRESS OR IMPLIED, OR BY USAGE OF TRADE, STATUTORY OR OTHERWISE, 
WITH REGARD TO THE PRODUCT SOLD, INCLUDING, BUT NOT LIMITED TO MERCHANTABILITY, FITNESS FOR 
A PARTICULAR PURPOSE, USE, OR ELIGIBILITY OF THE PRODUCT FOR ANY PARTICULAR TRADE USAGE. 
UNINTENDED CONSEQUENCES, INCLUDING BUT NOT LIMITED TO INEFFECTIVENESS, MAY RESULT BECAUSE 
OF SUCH FACTORS AS THE PRESENCE OR ABSENCE OF OTHER MATERIALS USED IN COMBINATION WITH
THE GOODS, OR THE MANNER OF USE OR APPLICATION, INCLUDING WEATHER, ALL OF WHICH ARE BEYOND 
THE CONTROL OF MANUFACTURER OR SELLER AND ASSUMED BY BUYER OR USER. THIS WRITING
CONTAINS ALL OF THE REPRESENTATIONS AND AGREEMENTS BETWEEN BUYER, MANUFACTURER AND
_________________________________________________________12____________ 
crop oil concentrate with at least 17 % emulsifiers at 1 -2 quarts per acre 
or a non-ionic surfactant at .25% v/v surfactant to water -1 quart per 100 
gallons of water. Spray volumes of up to 500 gallons per acre may be 
needed for control if brush is dense.
For solid stands of susceptible brush, apply in 3 to 12 gallons volume per 
acre. 2 to 4 quarts of fuel oil may be included in this mixture.
Woody plants - Aerial
application
RESTRICTIONS AND LIMITATIONS FOR NON-CROP AREAS;
• Postemergence (annual and perennial weeds);
Limited to 2 applications per year.
Maximum of 2.85 pts. (2 lbs. ae) per acre per application.
• Minimum of 30 days between applications.
• Postemergence (woody plants);
Limited to 1 application per year.
Maximum of 5.7 pts. (4 lbs. ae) per acre per year.
• Application to non-cropland areas are not applicable to treatment of commercial timber or other plants being grown for 
sale or other commercial use, or for commercial seed production, or for research purposes.
DIRECTIONS
Apply to established stands before the seed head comes into the 
boot stage. Do not spray in boot stage of growth. For seedling 
grasses, apply in the spring after grass has tillered or has at least 5 
leaves, but before the boot stage.
Perennial and biennial
weeds
• Use only the low rate on seedling grasses.
RESTRICTIONS AND LIMITATIONS FOR TURF GROWN FOR SEED OR SOD;
• Limited to 2 applications per year.
• Maximum of 2.85 pts. (2 lbs. ae) per acre per application.
• Minimum of 21 days between applications.
1-1/3 to 2-1/8 
pints *
RATE PER ACRE
2/3 to 1 pint *
DIRECTIONS
The maximum number of broadcast applications per treatment site is 2 
per year. Do not apply to newly seeded areas until grass is well 
established. Where bentgrass predominates, make 2 applications of a 2/3 
pint per acre at 3 week intervals. Do not use on susceptible southern 
grasses such as St. Augustine, bentgrass and dichondra.
• Deep-rooted perennials may require repeat applications. Clovers and legumes may be injured by this treatment. 
RESTRICTIONS AND LIMITATIONS FOR TURF, ORNAMENTAL (golf courses, parks cemeteries, sports fields, turf grass, 
and other lawn and grass areas);
• Postemergence;
• Limited to 2 applications per year.
• Maximum of 2.14 pts. (1.5 lbs. ae) per acre per application.
• The maximum seasonal rate is 4.28 pints (3 lbs, ae) per acre, excluding spot treatments.
2-2/3 to 5-1/3 
pints
TURF, ORNAMENTAL (golf courses, parks, cemeteries, sports fields, turf grass, and other lawn and grass areas) 
I RATE PER ACRE I
WEEDS
Annual broadleaf weeds
WEEDS
Annual broadleaf weeds

{Shredder® is a registered trademark of Winfield Solutions, LLC.J
13
SELLER, AND NO PERSON OR AGENT OF MANUFACTURER OR SELLER HAS ANY AUTHORITY TO MAKE ANY 
REPRESENTATION OR WARRANTY OR AGREEMENT RELATING IN ANY WAY TO THESE GOODS.
LIMITATION OF LIABILITY
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, IN NO EVENT SHALL MANUFACTURER OR SELLER BE 
LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, OR FOR DAMAGES IN THE NATURE OF 
PENALTIES RELATING TO THE GOODS SOLD, INCLUDING USE, APPLICATION, HANDLING, AND DISPOSAL. 
MANUFACTURER OR SELLER SHALL NOT BE LIABLE TO BUYER OR USER BY WAY OF INDEMNIFICATION TO 
BUYER OR TO CUSTOMERS OF BUYER, IF ANY, OR FOR ANY DAMAGES OR SUMS OF MONEY, CLAIMS OR 
DEMANDS WHATSOEVER, RESULTING FROM OR BY REASON OF, OR RISING OUT OF THE MISUSE, OR 
FAILURE TO FOLLOW LABEL WARNINGS OR INSTRUCTIONS FOR USE, OF THE GOODS SOLD BY 
MANUFACTURER OR SELLER TO BUYER. ALL SUCH RISKS SHALL BE ASSUMED BY THE BUYER, USER, OR 
ITS’ CUSTOMERS, BUYER’S OR USER’S EXCLUSIVE REMEDY, AND MANUFACTURER ’S OR SELLER ’S TOTAL 
LIABILITY SHALL BE FOR DAMAGES NOT EXCEEDING THE COST OF THE PRODUCT.
If you do not agree with or do not accept any of directions for use, the warranty disclaimers, or limitations on liability, do 
not use the product, and return it unopened to the Seller, and the purchase price will be refunded.