crop-chem-docs/corpus/epa_ppls/19713-658.md

# DREXEL FOMA 2.0 HERBICIDE

- EPA Reg No: **19713-658**
- Registrant: DREXEL CHEMICAL COMPANY
- Signal word: Danger
- Active ingredients: Sodium salt of fomesafen (22.8%)
- Label accepted: 2022-06-03
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/019713-00658-20220603.pdf

---
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY 
 WASHINGTON, DC 20460 
 
 
 
OFFICE OF CHEMICAL SAFETY 
AND POLLUTION PREVENTION 
 
June 3, 2022 
 
Mandy Styles 
Registration Manager 
Drexel Chemical Company 
P.O. Box 13327 
Memphis, TN 38113-0327 
 
Subject: Registration Review Label Mitigation for Fomesafen 
 Product Name: DREXEL FOMA 2.0 HERBICIDE 
 EPA Registration Number: 19713-658 
 Application Date: 5/24/2018 
Decision Number: 585099 
 
Dear Ms. Styles: 
 
The Agency, in accordance with the Federal Insecticide, Fungicide and Rodenticide Act 
(FIFRA), as amended, has completed reviewing all the information submitted with your 
application to support the Registration Review of the above referenced product in connection 
with the Fomesafen Interim Decision, and has concluded that your submission is acceptable. The 
label referred to above, submitted in connection with registration under FIFRA, as amended, is 
acceptable. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please be 
aware that the website becomes labeling under the Federal Insecticide Fungicide and Rodenticide 
Act and is subject to review by the Agency. If the website is false or misleading, the product 
would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40 
CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In addition, 
regardless of whether a website is referenced on your product’s label, claims made on the 
website may not substantially differ from those claims approved through the registration process. 
Therefore, should the Agency find or if it is brought to our attention that a website contains false 
or misleading statements or claims substantially differing from the EPA approved registration, 
the website will be referred to the EPA’s Office of Enforcement and Compliance. 
 
A stamped copy of your labeling is enclosed for your records. This labeling supersedes 
all previously accepted labeling. You must submit one copy of the final printed labeling 
before you release the product for shipment with the new labeling. In accordance with 40 
CFR 152.130(c), you may distribute or sell this product under the previously approved 
labeling for 12 months from the date of this letter. After 12 months, you may only 
distribute or sell this product if it bears this new revised labeling or subsequently 
approved labeling. “To distribute or sell” is defined under FIFRA section 2(gg) and its 
implementing regulation at 40 CFR 152.3.

Page 2 of 2 
EPA Reg. No. 19713-658 
Decision No. 585099 
 
 
If you have any questions about this letter, please contact Darius Stanton by phone at 202-566-
2332, or via email at stanton.darius@epa.gov. 
 
 Sincerely, 
 
 
 Linda Arrington, Branch Chief 
 Risk Management and Implementation Branch 4 
 Pesticide Re-Evaluation Division 
 Office of Pesticide Programs 
 
Enclosure

Page 1 of 26
For Control of Certain Weeds in Cotton, Dry Beans, Potatoes, Snap Beans, and Soybeans.
ACTIVE INGREDIENT:
Sodium salt of fomesafen 
5-[2 -chloro-4-(trifluoromethyl)phenoxy]-N-(methylsuIfonyl)-2-nitrobenzamide………………... 22.8%*
OTHER INGREDIENTS: ................................................................................................................ 77.2%
TOTAL: ........................................................................................................................................ 100.0%
*Equivalent to 21.7% or 2 pounds of fomesafen per gallon.
This product is formulated as a soluble liquid.
KEEP OUT OF REACH OF CHILDREN
DANGER / PELIGRO
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do not understand 
the label, find someone to explain it to you in detail.)
See FIRST AID Below
[See Side (Back) Panel for FIRST AID]
[See Attached Booklet for Complete Directions for Use]
EPA Reg. No. 19713-658
EPA Est. No. 19713-XX-XXX Net Content:______Gals. (______L)
FIRST AID
IF IN EYES:
• Hold eye open and rinse slowly and gently with water for 15 to 20 minutes.
• Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye.
• Call a poison control center or doctor for treatment advice.
IF SWALLOWED:
• Call a poison control center or doctor immediately for treatment advice.
• Have person sip a glass of water if able to swallow.
• Do not induce vomiting unless told to do so by a poison control center or doctor.
• Do not give anything by mouth to an unconscious or convulsing person.
IF ON SKIN OR CLOTHING:
• Take off contaminated clothing.
• Rinse skin immediately with plenty of water for 15 to 20 minutes.
• Call a poison control center or doctor for treatment advice.
IF INHALED:
• Move person to fresh air.
• If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth-
to-mouth, if possible.
• Call a poison control center or doctor for further treatment advice.
Have the product container or label with you when calling a poison control center or doctor, or going for 
treatment. You may also call CHEMTREC at 800-424-9300 for emergency medical treatment information.
NOTE TO PHYSICIAN: Probable mucosal damage may contraindicate the use of gastric lavage.
658SP-0519*P
FOMESAFEN GROUP 14 HERBICIDE
Foma® 2.0
Herbicide
Jun 03, 2022
19713-658

Page 2 of 26 
 
PRECAUTIONARY STATEMENTS
Hazards to Humans and Domestic Animals
DANGER: CORROSIVE. CAUSES IRREVERSIBLE EYE DAMAGE. Harmful if swallowed or absorbed 
through skin. Do not get in eyes, on skin or on clothing. Avoid breathing vapors or spray mist. Prolonged 
or frequent repeated skin contact may cause allergic reactions in some individuals.
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Applicators and other handlers must wear:
• Long-sleeved shirt and long pants
• Chemical-resistant gloves made of barrier laminate, butyl rubber, nitrile rubber > 14 mils, neoprene 
rubber > 14 mils, natural rubber > 14 mils, polyethylene, polyvinyl chloride > 14 mils or viton > 14 mils. 
• Shoes plus socks
• Protective eyewear (goggles, safety glasses or face shield)
Discard clothing and other absorbent materials that have been drenched or heavily contaminated with 
this product's concentrate. Do not reuse them. Follow manufacturer's instructions for 
cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep 
and wash PPE separately from other laundry.
Engineering Controls:
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the 
requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 
170.240(d)(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS.
USER SAFETY RECOMMENDATIONS
Users should: 1) Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. 
2) Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean 
clothing. 3) Remove PPE immediately after handling this product. Wash the outside of gloves before 
removing. As soon as possible, wash thoroughly and change into clean clothing.
ENVIRONMENTAL HAZARDS
For Terrestrial Uses: Do not apply directly to water, or to areas where surface water is present, or to
intertidal areas below the mean high water mark. Do not contaminate water when disposing of equipment 
washwater or rinsate. Do not apply when weather conditions favor drift from target area. Drift and runoff may 
be hazardous to aquatic organisms in water adjacent to treated areas.
Surface Water Advisory
This product may impact surface water quality due to spray drift and runoff of rain water. This is especially 
true for poorly draining soils and soils with shallow ground water. This product is classified as having high 
potential for reaching surface water via runoff for several months after application. A level, well-maintained 
vegetative buffer strip between areas to which this product is applied and surface water features such as 
ponds, streams, and springs will reduce the potential loading of fomesafen from runoff water and sediment. 
Runoff of this product will be reduced by avoiding applications when rainfall is forecasted to occur within 48 
hours. 
Groundwater Advisory
This chemical has properties and characteristics associated with chemicals detected in groundwater. This 
chemical may leach into groundwater if used in areas where soils are permeable, particularly where the 
water table is shallow.
Non-target Organism Advisory Statement: 
This product is toxic to plants and may adversely impact the forage and habitat of non-target organisms, including 
pollinators, in areas adjacent to the treated site. Protect the forage and habitat of non-target organisms by following 
label directions intended to minimize spray drift.

Page 3 of 26 
 
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
Do not apply this product in a way that will contact workers or other persons, either directly or through drift. 
Only protected handlers may be in the area during application. For any requirements specific to your State 
or Tribe, consult the agency responsible for pesticide regulation.
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard (WPS), 40 
CFR Part 170. This standard contains requirements for the protection of agricultural workers on farms, 
forests, nurseries, greenhouses and handlers of agricultural pesticides. It contains requirements for 
training, decontamination, notification and emergency assistance. It also contains specific instructions 
and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and 
restricted entry interval (REI). The requirements in this box only apply to uses of this product that are 
covered by the WPS.
Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 
24 hours.
PPE required for early entry to treated areas that is permitted under the WPS and that involves contact 
with anything that has been treated, such as plants, soil or water is: 
• Coveralls
• Chemical-resistant gloves such as barrier laminate or viton
• Shoes plus socks
• Protective eyewear
PRODUCT INFORMATION
Read the label before using this product.
This product is a selective herbicide which may be applied pre-plant surface, pre-emergence and/or post-
emergence for control or partial control of broadleaf weeds, grasses and sedges in cotton, dry beans, 
potatoes, snap beans and soybeans. 
Pre-plant Surface and Pre-emergence Applications
Certain germinating broadleaf weeds, grasses and sedges can be controlled or partially controlled by soil 
residual activity from either pre-plant surface or pre-emergence applications of this product. Moisture is 
necessary to activate this product in soil for residual weed control. Dry weather following applications of 
this product may reduce effectiveness. When adequate moisture is not received after application of this 
product, weed control may be improved by overhead irrigation with at least a one-fourth inch of water.
Post-emergence Applications
This product is generally most effective when used post-emergence, working through contact action. 
Therefore, emerged weeds must have thorough spray coverage for effective control. Best broad-spectrum 
post-emergence control of susceptible broadleaf weeds is obtained when this product is applied early to 
actively growing weeds. This usually occurs within 14 to 28 days after planting. Refer to the weed control 
tables for specific directions on weed growth stages and rates. Some bronzing, crinkling or spotting of 
labeled crop leaves may occur following post-emergence applications, but labeled crops soon outgrow 
these effects and develop normally.
Soil Characteristics
Application of this product to soils with high organic matter and/or high clay content may require higher 
rates than soils with low organic matter and/or low clay content. Refer to the Regional
Use Map, weed 
control tables, and specific crop use sections for recommendations on use rates based on soil 
texture.

Page 4 of 26 
 
Environmental and Agronomic Conditions
Always apply this product under favorable environmental conditions that promote active weed growth. Avoid 
applying this product to weeds or labeled crops which are under stress from drought, extreme temperatures, 
excessive water, low humidity, low soil fertility, mechanical or chemical injury as reduced weed control 
and/or increased crop injury may result.
Rainfastness
This product requires a 1 hour rain-free period for best results when applied post-emergence.
Cultivation
Cultivation prior to post-emergence application is not recommended. Cultivation may put weeds under 
stress, reducing weed control. Timely cultivation 1 to 3 weeks after applying this product may assist weed 
control.
Information on Weed Resistance
For resistance management, this product is a Group 14 mode of action herbicide. Any weed population 
may contain or develop plants naturally resistant to this product and other Group 14 mode of action 
herbicides. The resistant biotypes may dominate the weed population if these herbicides are used 
repeatedly in the same field. Appropriate resistance management strategies should be followed.
To delay herbicide resistance, take one or more of the following steps:
xRotate the use of this product or other Group 14 herbicides within a growing season sequence or among 
growing seasons with different herbicide groups that control the same weeds in a field. 
xUse tank mixtures with herbicides from a different group if such use is permitted; where information on 
resistance in target weed species is available, use the less resistance-prone partner at a rate that will 
control the target weed(s) equally as well as the more resistance-prone partner. Consult your local 
extension service or certified crop advisor if you are unsure as to which active ingredient is currently less 
prone to resistance. 
xAdopt an integrated weed-management program for herbicide use that includes scouting and uses 
historical information related to herbicide use and crop rotation, and that considers tillage (or other 
mechanical control methods), cultural ( e.g., higher crop seeding rates; precision fertilizer application 
method and timing to favor the crop and not the weeds), biological (weed-competitive crops or varieties) 
and other management practices. 
xScout after herbicide application to monitor weed populations for early signs of resistance development. 
Indicators of possible herbicide resistance include: (1) failure to control a weed species normally 
controlled by the herbicide at the dose applied, especially if control is achieved on adjacent weeds; (2) a 
spreading patch of non-controlled plants of a particular weed species; (3) surviving plants mixed with 
controlled individuals of the same species. If resistance is suspected, prevent weed seed production in 
the affected area by an alternative herbicide from a different group or by a mechanical method such as 
hoeing or tillage. Prevent movement of resistant weed seeds to other fields by cleaning harvesting and 
tillage equipment when moving between fields, and planting clean seed. 
xIf a weed pest population continues to progress after treatment with this product, discontinue use of this 
product, and switch to another management strategy or herbicide with a different mode of action, if 
available. 
xContact your local extension specialist or certified crop advisors for additional pesticide resistance-
management and/or integrated weed-management recommendations for specific crops and weed 
biotypes. 
xFor further information or to report suspected resistance, contact Drexel Chemical Company 
representatives at (901) 774-4370. 
FOMESAFEN GROUP 14 HERBICIDE

Page 5 of 26 
 
MANDATORY SPRAY DRIFT MANAGEMENT
AERIAL APPLICATIONS:
• Do not release spray at a height greater than 10 feet above the vegetative canopy, unless a greater 
application height is necessary for pilot safety.
• For applications prior to the emergence of crops and target weeds, applicators are required to use a 
coarse or coarser droplet size (ASABE S572.1).
• For all other applications, applicators are required to use a medium or coarser droplet size (ASABE 
S572.1).
• For aerial applications: Do not apply when wind speeds exceed 15 mph at the application site. If the 
wind speed is greater than 10 mph, the boom length must be 65% or less of the wingspan for fixed 
wing aircraft and 75% or less of the rotor diameter for helicopters. Otherwise, the boom length must 
be 75% or less of the wingspan for fixed wing aircraft and 90% or less of the rotor diameter for 
helicopters. Applicators must use one-half swath displacement upwind at the downwind edge of the 
field.
• Nozzles must be oriented so the spray is directed toward the back of the aircraft.
• Do not apply when wind speeds exceed 15 mph at the application site.
xDo not apply during temperature inversions.
GROUND BOOM APPLICATIONS:
• User must only apply with the nozzle height recommended by the manufacturer, but no more than 3 
feet above the ground or crop canopy unless making a turf, pasture, or rangeland application, in 
which case applicators may apply with a nozzle height no more than 4 feet above the ground.
• For applications prior to the emergence of crops and target weeds, applicators are required to use a 
coarse or coarser droplet size (ASABE S572.1).
• For all other applications, applicators are required to use a medium or coarser droplet size (ASABE 
S572.1).
• Do not apply when wind speeds exceed 15 miles per hour at the application site.
• Do not apply during temperature inversions.
SPRAY DRIFT ADVISORIES
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT.
BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS.
IMPORTANCE OF DROPLET SIZE
An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide 
target pest control. While applying larger droplets will reduce spray drift, the potential for drift will be 
greater if applications are made improperly or under unfavorable environmental conditions.
Controlling Droplet Size - Ground Boom
• Volume- Increasing the spray volume so that larger droplets are produced will reduce spray drift. Use 
the highest practical spray volume for the application. If a greater spray volume is needed, consider 
using a nozzle with a higher flow rate.
• Pressure- Use the lowest spray pressure recommended for the nozzle to produce the target spray 
volume and droplet size.
• Spray Nozzle- Use a spray nozzle that is designed for the intended application. Consider using nozzles 
designed to reduce drift.
Controlling Droplet Size - Aircraft 
• Adjust Nozzles- Follow nozzle manufacturer’s recommendations for setting up nozzles. Generally, to 
reduce fine droplets, nozzles should be oriented parallel with the airflow in flight.
BOOM HEIGHT
Ground Boom Use the lowest boom height that is compatible with the spray nozzles that will provide 
uniform coverage. For ground equipment, the boom should remain level with the crop and have minimal 
bounce.

Page 6 of 26 
 
RELEASE HEIGHT
Aircraft Higher release heights increase the potential for spray drift.
SHIELDED SPRAYERS 
Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify 
that the shields are not interfering with the uniform deposition of the spray on the target area.
TEMPERATURE AND HUMIDITY
When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation.
TEMPERATURE INVERSIONS
Drift potential is high during a temperature inversion. Temperature inversions are characterized by 
increasing temperature with altitude and are common on nights with limited cloud cover and light to no 
wind. The presence of an inversion can be indicated by ground fog or by the movement of smoke from a 
ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated 
cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly 
dissipates indicates good vertical air mixing. Avoid applications during temperature inversions.
WIND
Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND
CONDITIONS.
Applicators need to be familiar with local wind patterns and terrain that could affect spray drift.
Drift Management
Refer to the “SPRAY DRIFT” section at the end of this label.
APPLICATION DIRECTIONS
Spray Additives
Only spray additives cleared for use on growing crops under 40 CFR 180 may be used in the spray mixture.
For Post-emergence Applications Always Add One of The Following Except in Tank Mix With 
Products Prohibiting Spray Additives:
Nonionic Surfactant (NIS): Use NIS containing at least 80% active ingredient at 0.25 to 0.5% v/v (1 to 2
qts. per 100 gallons) of finished spray volume.
Crop Oil Concentrate (COC): Use a non-phytotoxic COC containing 15 to 20% approved emulsifier at 0.5 
to 1% v/v (2 to 4 qts. per 100 gallons) of finished spray volume. COC can improve weed control but may 
slightly reduce crop tolerance.
Other Adjuvants: Adjuvants other than COC or NIS may be used provided that the product meets the 
following criteria:
1. Contains only EPA exempt ingredients.
2. It is non-phytotoxic to the target crop.
3. It is compatible in mixture. (May be established through a jar test.)
4. It is supported locally for use with this product on the target crop through proven field trials and through 
university and extension recommendations.
Note: No adjuvants are needed for pre-plant or pre-emergence applications unless this product is being 
used in a burndown.
Recommended Mixing Order:
1. Fill spray tank with half the required amount of water and begin agitation.
*
2. Add dry pesticide formulations.
3. Add this product.

Page 7 of 26 
 
4. Add liquid pesticide formulation.
5. Add adjuvant and fertilizer (if used)
6. Add remainder of water and then maintain constant agitation.
*Compatibility agent, 1 gallon per 500 gallons of water or 0.2% v/v, may be added as needed.
Tank-Mix Compatibility Test
A jar test is recommended prior to tank mixing to ensure compatibility of this product with mixture partners. 
Add proportion amounts of tank mixture components in a clear quart jar one at a time in the recommended 
mixing order. Gently shake or invert capped jar and let stand for 15 to 30 minutes. If the mixture clumps, 
forms flakes, oily films or layers or other precipitates, it is not compatible and the tank mixture should not 
be used.
GROUND APPLICATIONS
Pre-plant Surface and Pre-emergence Application - Use a minimum of 10 gallons per acre. Nozzle 
selection should meet manufacturer's gallonage and pressure recommendations for pre-plant surface or 
pre-emergence applications. For applications prior to the emergence of crops and target weeds, applicators 
are required to use a coarse or coarser droplet size (ASABE S572.1).
Post-emergence Application - Use sufficient spray volume and pressure to ensure complete coverage of 
the target weed. A spray volume of 10 to 20 gallons per acre and 30 to 60 psi at the nozzle tip is 
recommended. On large weeds and/or dense foliage, use 60 psi and a minimum of 20 gallons per acre to 
ensure coverage of weed foliage.
The use of flat fan nozzles will result in the most effective post-emergence application of this product. Use 
nozzles that are set up to deliver medium quality spray (ASAE Standard S-572). DO NOT USE FLOOD 
TYPE OR OTHER SPRAY NOZZLES, WHICH DELIVER COARSE, LARGE DROPLET SPRAYS.
BAND APPLICATIONS
Calculate the amount of herbicide and water volume needed for post-emergence band treatment using 
the following formula:
Band width in inches x Broadcast rate per acre = Band herbicide rate per acre
Row width in inches
Band width in inches x Broadcast volume per acre = Band herbicide rate per acre
Row width in inches
Note: Thorough weed coverage is important for post-emergent control. Best coverage is obtained with a 
minimum of two nozzles, one directed to each side of the planted row. Application with a single nozzle 
directed over the top of the row is not directed for post-emergence applications but is suitable for pre-
emergence applications. Cultivation of untreated areas may be needed following band applications. When 
making post-emergence band applications and cultivating in the same operation, position nozzles in 
advance of the cultivation device. This will reduce dust in the spray area. Dust can intercept spray, reducing 
weed coverage, resulting in less than adequate weed control.
AERIAL APPLICATION
Use sufficient spray volume and pressure to ensure complete coverage of the target. A minimum of 5 
gallons per acre of spray mixture should be applied with a maximum of 40 psi pressure. When broadleaf
weed foliage is dense, use a minimum of 10 gallons per acre to ensure coverage of weed foliage.
DO NOT APPLY THIS PRODUCT THROUGH ANY TYPE OF IRRIGATION SYSTEM, EXCEPT CENTER 
PIVOT SYSTEMS.

Page 8 of 26 
 
CENTER PIVOT IRRIGATION APPLICATION
This product alone or in tank mixture with other herbicides on this label, which are registered for center 
pivot application, may be applied in irrigation water pre-emergence (after planting but before weeds or crop 
emerge) at rates recommended on this label. This product also may be applied post-emergence to the crop 
and pre-emergence to weeds in crops where post-emergence applications are allowed on this label. Follow 
all restrictions (height, timing, rate, etc.) to avoid illegal residues. Apply this product only through a center 
pivot irrigation system. Do not apply this product through any other type of irrigation system. Crop injury, 
lack of effectiveness, or illegal pesticide residues in the crop can result from non-uniform distribution of 
treated water. If you have questions about calibration, you should contact State Extension specialists, 
equipment manufacturers, or other experts. Do not connect an irrigation system (including greenhouse 
systems) used for pesticide application to a public water system, unless the pesticide label-prescribed 
safety devices for public water systems are in place. A person knowledgeable of the chemigation system 
and responsible for its operation, or under the supervision of the responsible person, shall shut the system 
down and make necessary adjustments should the need arise.
Operating Instructions
• The system must contain a functional check-valve, vacuum relief valve, and low pressure drain 
appropriately located on the irrigation pipeline to prevent water source contamination from 
backflow.
• The pesticide injection pipeline must contain a functional, automatic, quick-closing check-valve to 
prevent the flow of fluid back toward the injection pump.
• The pesticide injection pipeline must also contain a functional, normally closed, solenoid-operated 
valve located on the intake side of the injection pump and connected to the system interlock to 
prevent fluid from being withdrawn from the supply tank when the irrigation system is either 
automatically or manually shut down.
• The system must contain functional interlocking controls to automatically shut off the pesticide 
injection pump when the water pump motor stops.
• The irrigation line or water pump must include a functional pressure switch which will stop the water 
pump motor when the water pressure decreases to the point where pesticide distributions adversely 
affected.
• Systems must use a metering pump, such as a positive displacement injection pump (e.g., 
diaphragm pump or piston pump), effectively designed and constructed of materials that are 
compatible with pesticides and capable of being fitted with a system interlock.
• Do not apply when wind speed favors drift beyond the area intended for treatment.
• Prepare a mixture with a minimum of 1 part water to 1 part herbicide(s) and inject this mixture into 
the center pivot system. Injecting a larger volume of a more dilute mixture per hour will usually 
provide more accurate calibration of equipment. Maintain sufficient agitation to keep the herbicide 
in suspension.
• Meter into irrigation water during entire period of water application.
• Apply in 1/2 to 1 inch of water. Use the lower water volume (1/2 inch) on coarser soils and the 
higher volume (1 inch) on fine-textured soils. More than 1 inch of water at application may reduce 
weed control by moving the herbicide below the effective zone in the soil.
Precautions for center pivot applications: Where sprinkler distribution patterns do not overlap sufficiently,
unacceptable weed control may result. Where sprinkler distribution patterns overlap excessively, crop injury 
may result.
Posting of areas to be chemigated is required when 1) any part of a treated area is within 300 feet of 
sensitive areas such as residential areas, labor camps, businesses, day care centers, hospitals, in-patient 
clinics, nursing homes or any public areas such as schools, parks, playgrounds, or other public facilities not 
including public roads, or 2) when the chemigated area is open to the public such as golf courses or retail 
greenhouses.
Posting must conform to the following requirements. Treated areas shall be posted with signs at all usual 
points of entry and along likely routes of approach from the listed sensitive area. When there are no usual 
points of entry, signs must be posted in the corners of the treated areas and in any other locations affording

Page 9 of 26 
 
maximum visibility to sensitive areas. The printed side of the sign should face away from the treated area 
towards the sensitive area. The signs shall be printed in English. Signs must be posted prior to application 
and must remain posted until foliage has dried and soil surface water has disappeared. Signs may remain 
in place indefinitely as long as they are composed of materials to prevent deterioration and maintain 
legibility for the duration of the posting period.
All words shall consist of letters at least 2.5 inches tall, and all letters and the symbol shall be a color which 
sharply contrasts with their immediate background. At the top of the sign shall be the words KEEP OUT, 
followed by an octagonal stop sign symbol at least 8 inches in diameter containing the word STOP. Below 
the symbol shall be the words PESTICIDES IN IRRIGATION WATER.
Posting required for chemigation does not replace other posting and reentry interval requirements for farm 
worker safety. 
Specific Instructions for Public Water Systems
1. Public water system means a system for the provision to the public of piped water for human 
consumption if such system has at least 15 service connections or regularly serves an average of at 
least 25 individuals daily at least 60 days out of the year.
2. Chemigation systems connected to public water systems must contain a functional, reduced-pressure 
zone, back-flow preventer (RPZ) or the functional equivalent in the water supply line upstream from the 
point of pesticide introduction. As an option to the RPZ, the water from the public water system should 
be discharged into a reservoir tank prior to pesticide introduction. There shall be a complete physical 
break (air gap) between the outlet end of the fill pipe and the top or overflow rim of the reservoir tank 
of at least twice the inside diameter of the fill pipe.
3. The pesticide injection pipeline must contain a functional, automatic, quick-closing check valve to 
prevent the flow of fluid back toward the injection pump.
4. The pesticide injection pipeline must contain a functional, normally closed, solenoid-operated valve 
located on the intake side of the injection pump and connected to the system interlock to prevent fluid 
from being withdrawn from the supply tank when the irrigation system is either automatically or manually 
shut down.
5. The system must contain functional interlocking controls to automatically shut off the pesticide injection 
pump when the water pump motor stops, or in cases where there is no water pump, when the water 
pressure decreases to the point where pesticide distribution is adversely affected.
6. Systems must use a metering pump, such as a positive displacement injection pump (e.g., diaphragm 
pump) effectively designed and constructed of materials that are compatible with pesticides and 
capable of being fitted with a system interlock.
7. Do not apply when wind speed favors drift beyond the area intended for treatment.
RESTRICTIONS
x Do not use on potatoes in Nassau and Suffolk Counties, New York.
• Do not make ground or aerial application during temperature inversions.
• A maximum of 1.5 pints of this product (or a maximum of 0.375 Ib. a.i. per acre of fomesafen from any 
product containing fomesafen) may be applied per acre per year in Region 1 (see Regional Use Map).
• A maximum of 1.5 pints of this product (or a maximum of 0.375 Ib. a.i. per acre of fomesafen from any 
product containing fomesafen) may be applied per acre in ALTERNATE years in Region 2 (see 
Regional Use Map).
• A maximum of 1.25 pints of this product (or a maximum of 0.313 Ib. a.i. per acre of fomesafen from any 
product containing fomesafen) may be applied per acre in ALTERNATE years in Region 3 (see 
Regional Use Map).

Page 10 of 26 
 
• A maximum of 1 pint of this product (or a maximum of 0.25 Ib. a.i. per acre of fomesafen from any 
product containing fomesafen) may be applied per acre in ALTERNATE years in Region 4 (see 
Regional Use Map).
• A maximum of 0.75 pint of this product (or a maximum of 0.1875 Ib. a.i. per acre of fomesafen from any 
product containing fomesafen) may be applied per acre in ALTERNATE years in Region 5 (see 
Regional Use Map).
PRECAUTIONS
• Thoroughly clean the spray system with water and a commercial tank cleaner before and after each 
use.
• Tank mixes of this product with other pesticides, fertilizers or any other additives except as specified 
on this label or other approved supplemental labels may result in tank-mix incompatibility, 
unsatisfactory performance or unsatisfactory crop injury.
• Avoid overlapping spray swaths, as injury may occur to rotational crops.
• To provide adequate coverage, it is recommended that ground speed not exceed 10 mph during 
application.
• Avoid drift to all other crops and non-target areas. Crops other than those labeled may be severely 
injured by drift. Do not apply when wind velocity exceeds 15 mph.
REPLANTING
If replanting is necessary in fields previously treated with this product, the field may be replanted to cotton, 
dry beans, snap beans or soybeans. During replanting, a minimum of tillage is recommended to preserve 
the herbicide barrier for effective weed control. Do not apply a second application of this product or other 
products containing fomesafen or other fomesafen containing product as crop injury or illegal residues may 
occur in harvested crops. If tank mix combinations were used, refer to product labels for any additional 
replanting instructions.
ROTATIONAL CROP RESTRICTIONS
The following rotational crops may be planted after applying this product at specified rates:
Crop to be Planted
Minimum Rotation Interval
(After Last Application of this Product)
Cotton, dry beans, snap beans and soybeans 0 days
Small grains such as wheat, barley, rye, peppers 
(transplanted), tomatoes (transplanted)
4m o n t h s
Corn*, peanuts, peas, rice, seed corn 10 months
To avoid crop injury do not plant alfalfa, 
sunflowers, sugar beets, sorghum** or any other 
crop within:
18 months 
*Use 12 month minimum rotation interval for popcorn in the states of Ohio, Kentucky, Illinois, Indiana, Iowa and 
Region 4 when applied at a rate of 1 pint per acre or more. Use 18 month minimum rotation interval for sweet corn 
in the states of Connecticut, Maine, Massachusetts, New Hampshire, New York, Rhode Island, Vermont and 
Region 5.
** Sorghum may be planted back after 10 months in Region 1.
Do not graze rotated small grain crops or harvest forage or straw for livestock.

Page 11 of 26
USE RATES OF THIS PRODUCT AND WEEDS CONTROLLED
REFER TO MAP FOR DEFINITION OF SPECIFIED GEOGRAPHIC REGIONS
REGIONAL USE MAP

Page 12 of 26
REGION 1
(Maximum Rate: 1.5 pints per acre per year)
REGION 1- Includes the following states or portion of states where this product may be applied: Alabama, 
Arkansas, Florida (except Miami-Dade County), Georgia, Louisiana, Mississippi, Missouri (Counties of 
Bollinger, Butler, Cape Girardeau, Dunklin, Madison, Mississippi, New Madrid, Pemiscot, Perry, Ripley, 
Scott, Stoddard and Wayne), North Carolina, Oklahoma (East of U.S. Highway 75 and East of Indian Nation 
Parkway), South Carolina, Tennessee and Texas (includes areas East of U.S. Highway 77 to State Road 
239 including all of Calhoun County).

Page 13 of 26
REGION 2
(Maximum Rate: 1.5 pints per acre, alternate years)
REGION 2 - Includes the following states or portion of states where this product may be applied: Delaware, 
Kentucky, Maryland, Virginia and West Virginia. South of Interstate 70 in the following states: Illinois, 
Indiana and Ohio and in Pennsylvania (all areas South of Interstate 80 to the intersection of U.S. Highway 
15 and East of U.S. Highway 15 and U.S. Highway 522 in Pennsylvania).

Page 14 of 26
REGION 3
(Maximum Rate: 1.25 pints per acre, alternate years)
REGION 3- Includes the following states or portion of states where this product may be applied: 
Connecticut, Iowa, Maine, Massachusetts, Missouri (all counties except for those listed in Region 1), New 
Hampshire, New Jersey, New York, Pennsylvania (all areas except those listed in Region 2), Rhode Island, 
Vermont, Wisconsin (South of U.S. Highway 18 between Prairie Du Chien and Madison, and South of 
Interstate 94 between Madison and Milwaukee) and North of Interstate 70 in the following states: Illinois, 
Indiana and Ohio.

Page 15 of 26
REGION 4
(Maximum Rate: 1 pint per acre, alternate years)
REGION 4 - Includes the following states or portion of states where this product may be applied: Kansas 
(all counties East of or intersected by U.S. Highway 281), Michigan (Southern Peninsula), Minnesota (all 
areas South of Interstate 94), Nebraska (all counties East of or intersected by U.S. Highway 281), and 
Wisconsin (all areas, except those in Region 3, South of Interstate 94 from Minnesota state line to Eau 
Claire and South of U.S. Highway 29 from Eau Claire to Green Bay plus Barron, Chippewa, Clark, Door, 
Dunn, Eau Claire, Kewaunee, Marathon, Menominee, Oconto, Polk, Shawano, and St. Croix counties. The 
following counties are excluded: Adams, Marquette, Portage, Waupaca, Waushara and Wood). North 
Dakota (all areas East of Interstate 29 from Fargo South to the South Dakota state line). South Dakota (all 
areas East of Interstate 29 from the North Dakota state line to Watertown, all areas East of Highway 81 
from Watertown to Madison and all areas East and South of State Road 34 and U.S. Highway 281 to the 
Nebraska state line).

Page 16 of 26
REGION 5
(Maximum Rate: 0.75 pint per acre, alternate years)
REGION 5 - Includes the following states or portion of states where this product may be applied: North 
Dakota (all areas East of U.S. Highway 281 except those areas in Region 4), South Dakota (all areas 
East of U.S. Highway 281 except those areas in Region 4) and Minnesota (all areas South of U.S. 
Highway 2 except those areas in Region 4).

Page 17 of 26 
 
WEEDS CONTROLLED
Table 1. Weeds controlled or partially controlled* by pre-plant surface or pre-emergence
application of this product at 1 to 1.5 pints per acre1.
Broadleaf Weeds Controlled Soil Texture Organic Matter
Amaranth, Palmer All soil types Up to 5%
Croton, tropic2
Eclipta
Galinsoga spp.
Lambsquarters, common
Morningglory, smallflower
Nightshade, black
Nightshade, Eastern black
Pigweed, redroot
Pigweed, smooth
Poinsettia, wild
Purslane, common
Ragweed, common2
Sida, prickly2
Starbur, bristly
Broadleaf Weeds Partially Controlled*
Anoda, spurred
Cocklebur, common
Morningglory, entireleaf
Morningglory, ivyleaf
Morningglory, pitted
Morningglory, red/scarlet
Morningglory, tall
Nightshade, hairy
Ragweed, giant
Waterhemp, common
Sedges Partially Controlled*
Nutsedge, yellow
*Partial control means significant activity but not always at a level considered acceptable for commercial weed 
control.
1Use the higher end of the rate range when heavy weed populations are anticipated.
2Rates less than 1.5 pints per acre will provide only partial control of this weed.

Page 18 of 26 
 
Table 2. Weeds controlled or partially controlled* by post-emergence application of this 
product.
 
 
Weed/Scientific Name 
Rate of This Product 
(Maximum Growth Stage Controlled At) 
0.75 pint per 
acre 
No. of True 
Leaves 
1 pint per acre 
No. of True 
Leaves 
1.25 pints per 
acre 
No. of True 
Leaves 
1.5 pints per acre 
No. of True 
Leaves 
Anoda, Spurred -- -- -- 2
Balloonvine -- -- 2 c 2
Carpetweed -- 6" Diameter 
size
Multi-leaf
6” Diameter
Unlimited size
Citron (Wild watermelon) -- 2 2 4
Cocklebur, Common a,b -- -- 24
Copperleaf, Hophornbeam -- 2 2 4
Copperleaf, Virginia -- 2 2 4
Crotalaria, Showy -- 4 4 6
Croton, Tropic -- 2 2 4
Cucumber, Volunteer -- 4 4 6
Eclipta -- 2 2 4
Groundcherry, Cutleaf -- 4 4 6
Hempb -- -- 4 6
Horsenettleb -- 2 c 3c 4c
Jimsonweed 24 6 8
Ladysthumb -- 2 2 4
Lambsquarters, Commonc -- 2 2 2
Mexicanweed -- 2 c 2c 2
Morningglory:
Cypressvine -- 4 4 6
Entireleaf var. 2c 22 4
Ivyleaf 2c 22 4
Purple moonflower -- 2 4 4
Red (scarlet) -- 2 2 4
Smallflower -- 2 2 4
Pitted (smallwhite) -- 4 4 4
Tall (common) 2c 22 3
Palmleaf (willowleaf) -- 2 2 4
Mustard, Wild 24 6 8
Nightshade, Black 24 4 4
Nutsedge, Yellow -- -- -- Suppression Only
Pigweed
Amaranth, Palmer 2c 44 6
Amaranth, Spiny 2c 22 4
Redroot 2c 46 6
Smooth 2c 44 6
Poinsettia, Wild -- -- -- 3
Purslane, Common -- Multi-leaf
6" diameter
Multi-leaf
6" diameter
Multi-leaf
8" diameter
Purslane, Florida -- -- -- 2

Page 19 of 26 
 
Ragweed, Common 24 4 6
Ragweed, Giantb -- -- 4 4
Redweed -- -- -- 3 c
Sesbania, Hemp -- 6 6 12
Sicklepod -- - -- Cotyledon c
Sida, Prickly -- -- -- Cotyledonc
Smartweed, Pennsylvania 2 c 44 6
Smellmelon -- -- -- 2
Spurge, Prostrate -- - -- 1" Diameter c
Spurge, Spotted -- -- -- 2 c
Starbur, Bristly -- 2 2 4
Sunflower, Common -- -- -- 2
Velvetleaf b -- -- 2 4
Venice mallow 2 4 4 6
Witchweed -- Multi-leaf
Up to 7"
Multi-leaf
Up to 7"
Multi-leaf
Up to 10"
Waterhemp, Common 2c 22 4
Waterhemp, Tall 2c 22 4
Yellow rocket 2 4 6 6
*Partial control means significant activity but not always at a level considered acceptable for commercial weed 
control.
aDo not apply in cotyledon stage.
bFor effective control of this weed it is necessary to use 1 % MSO and 2.5% UAN v/v as an adjuvant in Regions 2 
and 3 (Soybeans only).
cPartial control.
SPECIAL USE DIRECTIONS FOR ADDITIONAL WEED PROBLEMS
Partial Control* of Annual Grasses 
The grasses listed below may be partially controlled by pre-emergence applications of this product at 1
to1.5 pints per acre.
Crabgrass
Goosegrass
Panicum, Texas
Signalgrass, broadleaf
The grasses listed below may be partially controlled by post-emergence applications of this product at 1
to 1.5 pints per acre.
Barnyardgrass
Crabgrass
Foxtail (Green, Giant, Yellow)
Goosegrass
Johnsongrass, Seedling
Panicum, Fall
Panicum, Texas
Signalgrass, broadleaf

Page 20 of 26 
 
Partial Control* of Perennial Weeds
Use of this product post-emergence at rates of 1 to 1.5 pints per acre will aid in suppressing the above-
ground portions of the weeds listed below until crop canopy can assist in suppression. Perennial weeds 
continue to regrow from underground rootstocks even if above-ground foliage is temporarily controlled or 
retarded. Even though this product and crop competition can suppress perennial weeds for a growing 
season, the rootstocks will continue to live and reestablishment will occur in subsequent years.
Bindweed, Field
Bindweed, Hedge
Milkweed, Climbing
Milkweed, Honeyvine
Trumpetcreeper
*Partial control means significant activity but not always at a level considered acceptable for commercial 
weed control.
CROP USE DIRECTIONS
COTTON
Pre-emergence Application
Apply this product 1 to 1.5 pints per acre as a pre-emergence application to coarse textured soils (sandy 
loam, loamy sand, sandy clay loam) only. Refer to Table 1 for a list of weeds controlled or partially 
controlled. Do not apply as a pre-emergence application to medium or fine textured soils as crop injury will 
likely occur.
Pre-plant Surface Application to Medium or Fine-Textured Soils
Apply this product at 1 pint per acre as a pre-plant surface application to medium or fine-textured soils (i.e. 
soil types heavier than coarse-textured soils) up to 21 days prior planting cotton. Apply after the last tillage 
operation is completed. Refer to Table 1 for a list of weeds controlled or partially controlled. Do not exceed 
1 pint per acre of this product on medium or fine-textured soils. Also, to avoid severe crop injury, the 
following directions must be followed when application is made to medium or fine-textured soils:
x After this product application, a minimum of 0.5 inch of rainfall or overhead irrigation must occur 
before planting cotton.
x Cotton must be planted at least 0.75 inch in depth.
x Avoid overlapping spray swaths
x Do not disturb or re-work the seedbed following application.
The use of an in-furrow or seed applied fungicide will generally assist with seedling establishment and 
development.
Cotton plants are tolerant to pre-plant surface or pre-emergence applications of this product when applied 
at recommended rates and application use directions. Some crinkling or spotting of cotton foliage or 
stunting may occur but cotton plants normally outgrow these effects and develop normally.
Cotton foliage is not tolerant to this product. Do not apply this product over the top of emerged cotton as 
unacceptable cotton injury will occur.
Post-Directed Application (All Soil Types)
Apply this product in emerged cotton as a post-directed treatment using precision post-directed, hooded or 
shielded application equipment to provide complete coverage of emerged weeds. Apply this product at 1 
to 1.5 pints per acre in a minimum of 10 gallons spray solution per acre. Applications may be made 
broadcast or banded. Post-directed applications of this product will provide contact control of labeled

Page 21 of 26 
 
emerged weeds and residual pre-emergence control of labeled weeds (once activated by rainfall or 
irrigation). Refer to the Weeds Controlled section for a list of weeds controlled, labeled application rates, 
weed growth stages, and application directions.
This product should be applied with a non-ionic surfactant at 0.25 to 0.5% v/v, or crop oil concentrate at 1% 
v/v to emerged weeds. Do not add liquid nitrogen (28% or similar) to this product, or tank mixes with this 
product in cotton.
Cotton foliage is not tolerant to applications of this product. Avoid contact to cotton foliage as unacceptable 
injury will occur. Application equipment should be calibrated (spray pressure, nozzle type and configuration, 
and orifice size) to avoid fine spray droplets contacting green cotton stems and foliage.
Post-Directed Application Timing in Cotton
This product may be applied to cotton at least 6 inches in height through layby as a post-directed 
application. All post-directed applications should avoid spray contact with any green non-barked parts of 
the cotton plant or foliage as unacceptable injury will occur. Follow the application timing below for post-
directed applications in cotton.
Shield and Hooded Applications:
Make a precision post-directed application of this product to the base of the cotton plant avoiding contact 
with the cotton stem or foliage when cotton is at least 6 inches in height to avoid cotton injury. Use only 
hooded or shielded spray equipment to apply this product in cotton that is 6 inches to 12 inches in height. 
Adjust nozzles to provide full coverage of emerged target weeds.
Lay-by Applications:
Make a post-directed application of this product to the base of the cotton plant avoiding contact with any 
non-barked portion of the cotton plant or foliage. Use precision post-directed equipment or hooded or 
shielded sprayers on cotton that has developed a minimum of 4 inches of brown bark through layby. 
Application equipment should be configured to provide full coverage of emerged target weeds.
Tank Mix and Sequential Application
To broaden the weed control spectrum, this product can be tank mixed with other herbicides such as those
listed below. Refer to the tank mix partner label for use directions, restrictions and limitations. The most 
restrictive product labeling applies. 
Diuron 
Fluometuron 
Glyphosate
Linuron
Metolachlor
MSMA
Norflurazon 
Prometryn 
Pyrithiobac 
S-metolachlor
Trifloxysulfuron
Use Restrictions - Cotton
x Do not apply this product later than 70 days before harvest.
x Do not apply more than 1.5 pints per acre of this product in any year.
x Do not apply more than 1 pint per acre of this product as a pre-plant surface application to medium or 
fine-textured soils.
Special Use Directions for the Suppression of Woollyleaf Bursage (Lakeweed), Ambrosia 
grayi, in Texas
Apply this product to cultivated areas of cropland in the fall or spring as a spot treatment at a rate of 1.5
pints per acre and incorporate to a depth of 2 to 3 inches for suppression of woollyleaf bursage. Applications 
should be made with ground equipment.

Page 22 of 26 
 
The use of adjuvants, as specified under the Spray Additives section, will significantly improve the initial 
burndown of any emerged woollyleaf bursage, but this effect is only temporary. Therefore, an adjuvant may 
be used if desired, but is not necessary.
Significant suppression may not be seen until 6 to 8 months after application, but should then continue for 
at least 2 years after application. Cotton or soybeans may be planted in treated areas. Under certain 
conditions, significant damage may occur to cotton planted within 18 months of application. A 3-year interval 
from last application to planting is required for all other crops.
Do not make more than one application of this product per year. Do not apply more than 1.5 pints per acre
of this product in any year. If two consecutive year applications are made, allow a 2 year interval before 
another application.
DRY BEANS AND SNAP BEANS
Pre-plant Surface and Pre-emergence Application
Apply this product as a pre-plant surface or pre-emergence application in Regions 1, 2, 3, and 4 only for 
control or partial control of the weeds listed in Table 1. This product can be applied alone, or tank mixed or 
followed sequentially with other labeled dry bean or snap bean herbicides to broaden the weed control 
spectrum or control newly emerged weeds. Refer to the Tank Mix and Sequential Application section for 
additional information.
Note: Treated soil that is splashed onto newly emerged seedlings may result in temporary crop injury but 
plants normally outgrow these effects and develop normally.
Post-emergence Application
Apply this product as a post-emergent broadcast application in Regions 1, 2, 3, 4 and 5 for control or partial 
control of the weeds listed in Table 2 and in the Special Use Directions For Additional Weed Problems 
section. Application rate depends on weed species and growth stage. Two applications may be made if 
necessary but not to exceed the maximum rate specified per geographic region. (Refer to map for definition 
of specified geographic regions). Refer to the Spray Additive section for spray additives. Use of crop oil 
concentrate can improve weed control but may slightly reduce crop tolerance. Do not use UAN (28% or 
similar) or ammonium sulfate on dry beans or snap beans as severe crop injury may occur. Apply when dry 
beans or snap beans have at least one fully expanded trifoliate leaf.
This product can be applied alone or in tank mix with other labeled dry bean or snap bean post-emergence
herbicides to broaden the weed control spectrum. Refer to the Tank Mix and Sequential Application
section.
Some bronzing, crinkling or spotting of dry bean or snap bean leaves may occur following post-emergent 
applications, but dry beans and snap beans soon outgrow these effects and develop normally.
Tank Mix and Sequential Application for Dry Beans and Snap Beans
To broaden the weed control spectrum, this product can be tank mixed with other herbicides as listed below. 
Refer to the tank mix partner label for use directions, restrictions and limitations. The most restrictive 
product labeling applies. 
Dry Beans and Snap Beans Dry Beans Only
Bentazon
EPTC
Imazamox
Imazethapyr
Metolachlor
Pendimethalin
Clethodim
Dimethenamid-P
Ethalfluralin

Page 23 of 26 
 
Quizalofop
Sethoxydim
S-metolachlor
Trifluralin
Under certain conditions, the mixture of this product with one or more of the above mentioned broadleaf 
herbicides may cause a reduction in activity of any post-emergence grass herbicide in the mixture.
For sequential applications allow 2 to 3 days after the application of the post-emergence grass herbicide 
before applying this product or mixtures of this product. Where this product or mixtures of this product is 
applied first, apply the grass herbicide when the grass weeds begin to develop new leaves (generally 
around 7 days).
NOTE: Tank mix applications can result in increased crop injury as compared to either product used alone.
Always read and follow the recommendations, restrictions and limitations for all products whether used 
alone, sequentially or in a tank mix. The most restrictive labeling of any product used applies.
Use Restrictions - Dry Beans and Snap Beans
x Refer to the Regional Use Map for the maximum use rate of this product (or other fomesafen containing 
products) that may be applied in each geographic region.
x Do not apply to any field in Regions 2, 3, 4 or 5 more than once every two years.
x For snap beans: Do not exceed 1.5 pints per acre of this product in any one year and also adhere to 
the maximum rate that may be applied in each geographic region (refer to the Regional Use Map). Do 
not graze treated areas or harvest for forage or hay. Do not utilize hay or straw for animal feed or 
bedding. Do not apply within 30 days of harvest.
x For dry beans: Do not exceed 1.5 pints per acre of this product in any one year and also adhere to the 
maximum rate that may be applied in each geographic region (refer to the Regional Use Map). Do not 
graze animals on green forage or stubble. Do not utilize hay or straw for animal feed or bedding. Do not 
apply within 45 days of harvest.
POTATOES
Apply this product at 1 pint per acre as a broadcast pre-emergence application after planting but before 
potato emergence for control or partial control of weeds listed in Table 1. Effectiveness will be reduced if 
later cultural practices expose untreated soil. For application by center pivot irrigation, see the Center Pivot 
Irrigation Application section of this label.
Note: Potato varieties may vary in their response to this product. When using this product for the first time 
on a particular variety, always determine crop tolerance before using.
Tank Mixtures With Other Products Registered for Use in Potatoes
For pre-emergence applications in potatoes, this product may be tank mixed with other pesticide products 
registered for use in this way and timing in potatoes. Follow the directions for use, observe the stated 
precautions, and abide by the limitations and restrictions on the most restrictive of the product labels. If you 
have no previous experience mixing these products under your conditions, perform a compatibility test 
before attempting large-scale mixing (see Tank Mix Compatibility Test section of this label).
Use Restrictions - Potatoes
x Do not exceed 1 pint per acre of this product per season. Refer to Regional Use Map for the maximum 
rate of this product (or other fomesafen containing products) that may be applied per year or alternate 
year in each geographic region.
x Do not harvest potatoes treated with this product within 70 days of application.
x Do not apply this product to sweet potatoes or yams.

Page 24 of 26 
 
x Do not apply this product as a pre-plant incorporated application in potatoes or crop injury may occur.
x Do not apply to emerged potato plants or severe crop injury will occur.
x Do use on potatoes in Nassau and Suffolk Counties, New York.
SOYBEANS
Pre-plant Surface and Pre-emergence Application
Apply this product as a pre-plant surface or pre-emergence application in Regions 1, 2, 3, and 4 only for 
control or partial control of the weeds listed in Table 1. This product can be applied alone or tank mixed or 
followed sequentially with other labeled soybean herbicides to broaden the weed control spectrum or control 
newly emerged weeds. Refer to the Tank Mix and Sequential Application for additional information.
In reduced tillage plantings, this product can be applied up to 14 days prior to planting or at planting with a 
burndown herbicide.
Post-emergence Application
Apply this product as a post-emergence broadcast application in Regions 1, 2, 3, 4 and 5 for control or 
partial control of weeds listed in Table 2 and in the Special Use Directions For Additional Weed 
Problems section. Application rate depends on weed species and growth stage. Refer to the Spray Additive
section for recommended spray additives. To enhance post-emergence control of susceptible broadleaf 
weeds (Soybeans only) in Regions 2, 3, 4 and 5 (see Regional Use Map), this product can be used with 
a minimum of 2.5% liquid nitrogen (28% or similar) or a minimum of 10 pounds ammonium sulfate per 100 
gallons of spray volume.
This product can be applied alone or in combination with other labeled soybean post-emergence herbicides 
to broaden the weed control spectrum. Refer to the Tank Mix and Sequential Application section.
Some bronzing, crinkling or spotting of soybean leaves may occur following post-emergent applications, 
but soybeans soon outgrow these effects and develop normally.
TANK MIX AND SEQUENTIAL APPLICATIONS FOR SOYBEANS:
To broaden the weed control spectrum, this product can be tank mixed with other herbicides as listed below. 
Refer to the tank mix partner label for use directions, restrictions and limitations. The most restrictive 
product labeling applies. 
2,4-DB
Bentazon
Chlorimuron
Clethodim
Fluazifop
Flumiclorac
Glufosinate
Glyphosate
Imazamox
Imazaquin
Imazethapyr
Quizalofop
Sethoxydim
Thifensulfuron
Under certain conditions, the mixture of this product with one or more of the above mentioned broad leaf 
herbicides may cause a reduction in activity of any post-emergence grass herbicide in the mixture.
NOTE:
xTank-mix applications can result in increased crop injury as compared to either product used alone.
xDo not exceed 1 fluid ounce of Butyrac (2,4-DB) per acre in mixture with this product.
For sequential applications allow 2 to 3 days after the application of the grass herbicide before applying this 
product or mixtures of this product. Where this product or mixtures of this product is applied first, apply the 
grass herbicide when grass weeds begin to develop new leaves (generally around 7 days).

Page 25 of 26 
 
Roundup Ready (Glyphosate Tolerant) Soybean Tank Mixes
This product can be tank mixed with glyphosate products that are labeled for Roundup Ready (glyphosate 
tolerant) soybeans for improved post-emergence control of many weeds such as morningglory spp., hemp 
sesbania, waterhemp, and black nightshade which are known to have tolerance to glyphosate, but are 
susceptible to this product (fomesafen).
FOLLOW THE DIRECTIONS ON THE GLYPHOSATE PRODUCT LABEL FOR THE USE OF SPRAY 
ADDITIVES IN THIS TANK MIX.
Do not allow this tank mix to move off target as contact by even minute quantities can cause severe damage 
or death to any non-target vegetation.
NOTE: Post emergence application of this tank mix on soybean varieties which do not contain the Roundup 
Ready gene will result in severe crop injury or death of the soybean crop. Always read and follow the 
recommendations, restrictions and limitations for all products used. The most restrictive labeling of any 
product applies.
Product Use Restrictions - Soybeans
x Refer to Regional Use Map for maximum rate of this product (or other fomesafen containing products) 
that may be applied in each geographic region. Do not apply to any field in Regions 2, 3, 4 or 5 more
than once every two years.
x Do not exceed 1.5 pints of this product per acre per in any one year and also adhere to the maximum 
rate that may be applied in each geographic region (refer to the Regional Use Map). Do not graze 
treated areas or harvest for forage or hay. Do not apply within 45 days of harvest.
STORAGE AND DISPOSAL
Do not contaminate water, food or feed by storage or disposal.
STORAGE: Storage should be under lock and key and secure from access by unauthorized persons 
and children. Storage should be in a cool, dry area away from any heat or ignition source. Do not stack 
over 2 pallets high. Move containers by handles or cases. Do not move containers from one area to 
another unless they are securely sealed. Keep container tightly sealed when not in use. Keep away from 
any puncture source. Avoid storage near water supplies, food, feed and fertilizer to avoid contamination. 
Store in original containers only. Unloading storage and work areas must be as clean as possible to 
prevent contamination if spilled. If concentrate or spray solution is allowed to dry on flammable objects, 
the chlorate component can act as oxidizer. If the contents are leaking or material is spilled, follow these 
steps:
1. Contain spill. Absorb with a material such as sawdust, clay granules or dirt.
2. Collect and place in suitable containers for disposal.
3. Wash area with soap and water to remove remaining pesticide.
4. Follow washing with clean water rinse.
5. Clothing contaminated with chlorate solution must be removed at once before solution dries. Dried 
contaminated clothes can be ignited easily. Wash contaminated clothing immediately. 
6. Do not allow runoff to enter sewer or contaminate water supplies.
7. Dispose of waste as indicated below:
PESTICIDE DISPOSAL: To avoid waste, use all materials in this container by application according to 
label directions. If wastes cannot be avoided, offer remaining product to a waste disposal facility or 
pesticide disposal program (often, such programs are run by State or local governments or by industry).
CONTAINER HANDLING:
Nonrefillable Container (rigid material; < 5 gallons): Nonrefillable container. Do not reuse or refill this 
container. Offer for recycling, if available. Clean container promptly after emptying. Triple rinse as follows: 
Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after

Page 26 of 26 
 
the flow begins to drip. Fill the container one-fourth full with water and recap. Shake for 10 seconds. Pour 
rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 
seconds after the flow begins to drip. Repeat this procedure two more times. Dispose of empty container 
in a sanitary landfill or by incineration, or, if allowed by State and local authorities, by burning. If burned, 
stay out of smoke.
Nonrefillable Container (rigid material; > 5 gallons up to < 250 gallons): Nonrefillable container. Do 
not reuse or refill this container. Offer for recycling, if available. Clean container promptly after emptying. 
Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. Fill the 
container one-fourth full with water. Replace and tighten closures. Tip container on its side and roll it 
back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end 
and tip it back and forth several times. Turn the container over onto its other end and tip it back and forth 
several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use or 
disposal. Repeat this procedure two more times. Dispose of empty container in a sanitary landfill or by 
incineration, or if allowed by State and local authorities, by burning. If burned, stay out of smoke.
Refillable Container (> 250 gallons & Bulk): Refillable container. Refill this container with pesticide 
only. Do not reuse this container for any other purpose. Cleaning the container before final disposal is 
the responsibility of the person disposing of the container. Cleaning before refilling is the responsibility 
of the refiller. To clean the container before final disposal, empty the remaining contents from this 
container into application equipment or mix tank. Fill the container about 10% full with water. Agitate 
vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application 
equipment or rinsate collection system. Repeat this rinsing procedure two more times.
Dispose of empty container in a sanitary landfill or by incineration, or, if allowed by State and local 
authorities, by burning. If burned, stay out of smoke.
CONTAINER IS NOT SAFE FOR FOOD, FEED OR DRINKING WATER. 
WARRANTY—CONDITIONS OF SALE
OUR DIRECTIONS FOR USE of this product are based upon tests believed reliable. Follow directions 
carefully. Timing and method of application, weather and crop conditions, mixtures with other chemicals
not specifically directed and other influencing factors in the use of this product are beyond the control of the 
Seller. To the extent consistent with applicable law, Buyer assumes all risks of use, storage and handling 
of this material not in strict accordance with directions given herewith. To the extent consistent with 
applicable law, in no case shall the Manufacturer or the Seller be liable for consequential, special or indirect
damages resulting from the use or handling of this product when such use and/or handling is not in strict 
accordance with directions given herewith. The foregoing is a condition of sale by the Seller and is accepted
as such by the Buyer.
 Manufactured By:
FOMA and the Drexel logo are registered trademarks of Drexel Chemical Company. All other brand names, product names, or 
trademarks belong to their respective holders.