crop-chem-docs/corpus/epa_ppls/19713-723.md

# Drexel Duplikator K-MAX

- EPA Reg No: **19713-723**
- Registrant: DREXEL CHEMICAL COMPANY
- Signal word: Caution
- Active ingredients: Glyphosate, potassium salt (51.2%)
- Label accepted: 2022-10-24
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/019713-00723-20221024.pdf

---
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY 
 WASHINGTON, DC 20460 
OFFICE OF CHEMICAL SAFETY 
AND POLLUTION PREVENTION 
 
Fast Track Label Acceptable v.20220527 
October 24, 2022 
 
Mandy Styles 
Registration Manager 
Drexel Chemical Company 
P.O.Box 13327 
Memphis, TN 38113-0329 
 
Subject: Label Amendment – Add registrant-imposed restrictions and units of 
measurement 
 Product Name: DREXEL DUPLIKATOR K-MAX 
 EPA Registration Number: 19713-723 
 Application Date: October 18, 2021 and August 9, 2022 
 Decision Number: 579365 and 587008 
 
Dear Mandy Styles: 
 
The amended label referred to above, submitted in connection with registration under the Federal 
Insecticide, Fungicide, and Rodenticide Act (FIFRA), as amended, is acceptable. This approval 
does not affect any conditions that were previously imposed on this registration. You continue to 
be subject to existing conditions on your registration and any deadlines connected with them. 
 
A stamped copy of your labeling is enclosed for your records. This labeling supersedes all 
previously accepted labeling. You must submit one copy of the final printed labeling before you 
release the product for shipment with the new labeling. In accordance with 40 CFR 152.130(c), 
you may distribute or sell this product under the previously approved labeling for 18 months 
from the date of this letter. After 18 months, you may only distribute or sell this product if it 
bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is 
defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please be 
aware that the website becomes labeling under FIFRA and is subject to review by the Agency. If 
the website is false or misleading, the product would be misbranded and unlawful to sell or 
distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) lists examples of statements 
EPA may consider false or misleading. In addition, regardless of whether a website is referenced 
on your product’s label, claims made on the website may not substantially differ from those 
claims approved through the registration process. Therefore, should the Agency find or if it is 
brought to our attention that a website contains false or misleading statements or claims 
substantially differing from the EPA approved registration, the website will be referred to the 
EPA’s Office of Enforcement and Compliance.

Page 2 of 2 
EPA Reg. No. 19713-723 
Decision No. 579365 and 587008 
 
Your release for shipment of the product constitutes acceptance of these conditions. If these 
conditions are not complied with, the registration will be subject to cancellation in accordance 
with FIFRA section 6. 
 
If you have any questions, please contact Lydia Crawford by phone at 202-566-2575, or via 
email at Crawford.Lydia@epa.gov. 
 
 
 
 
Enclosure 
 
 
Sincerely, 
 
Emily Schmid, Product Manager 25 
Herbicide Branch 
Registration Division (7505P) 
Office of Pesticide Programs

Page 1 of 143 
 
 [SUB-LABEL 1: FOOD & FEED CROPS] 
 
 
 
 
 
Non-selective, broad spectrum weed control for many agricultural systems, farmsteads, forestry, industrial, 
utility rig hts-of-way, turf and ornamental sites. Selective broad- spectrum weed control in Glyphosate 
Resistant and Glyphosate tolerant crops. 
 
ACTIVE INGREDIENT: 
 Glyphosate in the form of its potassium salt*................................................................................. 51.2% 
OTHER INGREDIENTS: ………………………………………………………………………………. 48.8% 
 TOTAL: ........................................................................................................................................100.0% 
* This product contains 5.88 pounds per U.S. gallon of glyphosate in the form of its potassium salt equivalent to 4.8 pounds per U.S. 
gallon of glyphosate acid. 
 
KEEP OUT OF REACH OF CHILDREN 
CAUTION 
(See FIRST AID Below) 
(See Side (Back) Panel for FIRST AID); (See Page ___ for FIRST AID) 
(See Container Labeling for (FIRST AID and) Complete Directions for Use) 
(See (Attached) Booklet (Container Labeling) for Complete Directions for Use) 
 
EPA Reg. No. 19713-723 
EPA Est. No. 19713-XX-XXX Net Content: (_____Gal.) (____L) (____Qt.) (____Fl. Oz.) 
FIRST AID 
IF IN EYES: 
• Hold eye open and rinse slowly and gently with water for 15 to 20 minutes. 
• Remove contact lenses, if present, after the first 5 minutes then continue rinsing eye. 
• Call a poison control center or doctor for treatment advice. 
Have the product container or l abel with you when calling a poison control center or doctor or going for treatment. 
You may also call CHEMTREC at 800-424-9300 for emergency medical treatment information. 
 
 
 
 
 
 
 
KMaxSP1-0221*P 
GLYPHOSATE GROUP 9 HERBICIDE 
Duplikator® K-MAX 
 Herbicide 
10/24/2022
19713-723

Page 2 of 143 
 
PRECAUTIONARY STATEMENTS 
CAUTION: Causes moderate eye irritation. Avoid contact with eyes or clothing. 
PERSONAL PROTECTIVE EQUIPMENT (PPE) 
Applicators and other handlers must wear: Long-sleeved shirt, long pants, shoes plus socks. 
Follow manufacturer's instructions for cleaning/maintaining PPE. I f no such instructions for washables exist, use 
detergent and hot water. Keep and wash PPE separately from other laundry. 
ENGINEERING CONTROLS 
When handlers use closed systems, enclosed cabs or aircraft in a manner that meets the requirements listed in the 
Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4- 6)], the handler PPE 
requirements may be reduced or modified as specified in the WPS. Important: When reduced PPE is worn 
because a closed system is being used, handlers must be provided all PPE specified above for applicators and other 
handlers and have such PPE immediately available for use in an emergency such as a spill or equipment breakdown. 
Hazards to Humans and Domestic Animals 
Domestic Animals: This product is considered to be relatively nontoxic to dogs and other domestic animals; 
however, ingestion of this product or large amounts of freshly sprayed vegetation may result in temporary 
gastrointestinal irritation (vomiting, diarrhea, colic, etc.). If such symptoms are observed, provide the animal with 
plenty of fluids to prevent dehydration. Call a veterinarian if symptoms persist for more than 24 hours. 
 
USER SAFETY RECOMMENDATIONS 
Users should: 1) Wash hands thoroughly with soap and water after handling and before eating, drinking, chewing 
gum, using tobacco or using the toilet. 2) Remove clothing/PPE immediately if pesticide gets inside. Then wash 
thoroughly and put on clean clothing. 
 
ENVIRONMENTAL HAZARDS 
Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the 
mean high water mark. Do not contaminate water when disposing of equipment washwater or rinsate. 
 
NON-TARGET ORGANISMS ADVISORY: 
This product is toxic to plants and may adversely impact the forage and habitat of non-target organisms, including 
pollinators, in areas adjacent to the treated site. Protect the forage and habitat of non-target organisms by following 
label directions intended to minimize spray drift. 
 
PHYSICAL AND CHEMICAL HAZARDS 
Spray solutions of this product may be mixed, stored and applied using stainless steel, fiberglass, plastic or plastic -
lined stee l containers. DO NOT MIX, STORE OR APPLY THIS PRODUCT OR SPRAY SOLUTIONS OF THIS 
PRODUCT IN GALVANIZED STEEL OR UNLINED STEEL (EXCEPT STAINLESS STEEL) CONTAINERS OR SPRAY 
TANKS. This product or spray solutions of this product react with such containers and tanks to produce hydrogen gas 
which can form a highly combustible gas mixture. This gas mixture could flash or explode if ignited by open flame, 
spark, welder's torch, lighted cigarette or other ignition source causing serious personal injury. 
 
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. This product can only be 
used in accordance with the directions for use on this label or in separately published supplemental labeling. Do not 
apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected 
handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency 
responsible for pesticide regulation. 
 
This product may be applied during fallow intervals preceding planting, prior to planting or transplanting, at-planting or 
preemergence to annual and perennial crops listed on this label, except where specifically limited. For any crop not 
listed on this label, application must be made a minimum of 30 days prior to planting. 
 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard (WPS), 40 CFR Part 
170. This standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, 
greenhouses and handlers of agricultural pesticides. It contains requirements for training, decontamination, 
notification and emergency assistance. It a lso contains specific instructions and exceptions pertaining to the 
statements on this label about personal protective equipment (PPE) and restricted entry interval (REI). The 
requirements in this box only apply to uses of this product that are covered by the WPS. 
Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 4 hours. 
PPE required for early entry to treated areas that is permitted under the WPS and that involves contact with anything 
that has been treated, such as plants, soil or water is: C overalls, chemical-resistant gloves, shoes plus socks and 
protective eyewear.

Page 3 of 143 
 
This product may be applied during fallow intervals preceding planting, prior to planting or transplanting, at-planting, 
or pre-emergence to annual and perennial crops listed on this label, except where specifically limited. For any crop 
not listed on this label, application must be made a minimum of 30 days prior to planting. 
NON-AGRICULTURAL USE REQUIREMENTS 
The requirements in this box apply to uses of this product that are NOT within the scope of the Worker Protection 
Standard, 40 CFR Part 170. The WPS applies when this product is used to produce agricultural plants on farms, 
forests, nurseries, and greenhouses. 
Do not allow people or pets off treated areas until sprays have dried. 
 
PRODUCT INFORMATION 
READ ENTIRE LABEL BEFORE USING THIS PRODUCT. 
THE CONDITIONS SPECIFIED WITHIN THE LABEL MUST ALWAYS BE FOLLOWED. 
It is a violation of Federal law to use this product in any manner inconsistent with its labeling. 
This product may only be used in accordance with the Directions for Use on this label or on separately published 
supplemental labeling. 
 
Product Description: This product is a post-emergence systemic herbicide with no soil residual activity. It is generally 
non-selective and gives broad spectrum control of many annual and perennial weeds, woody brush, trees and vines. It 
is formulated as a water soluble liquid and may be applied using most standard industrial or field sprayers after dilution 
and thorough mixing with water or other carriers according to label directions. Glyphosate works by targeting an 
enzyme that is essential for plant growth. 
 
Mode of Action: The active ingredient in this product inhibits an enzyme found only in plants and microorganisms that 
is essential to the formation of specific amino acids. 
 
Soil Activity: This product has NO soil activity. This product binds tightly to soil particles and does not provide residual 
weed control. Weeds must be emerged at the time of application to be controlled by foliar application of this product. 
Weed seeds in the soil will not be affected by this product and will continue to germinate. Unattached plant rhizomes 
or rootstocks beneath the soil surface will not be affected by this product. 
 
Degradation: Degradation of this product is primarily a biological process carried out by soil microbes. 
 
Time to Symptoms: This product moves through the plant from the point of foliage contact to and into the root system. 
Visible effects are gradual wilting and yellowing of the plant that advances to complete browning of above ground 
growth and deterioration of underground plant parts . Effects are visible on most annual weeds within 2 to 4 days but 
on most perennial weeds , effects might not be visible for 7 or more days after application. Extremely cool or cloudy 
weather following application could slow activity of this product and delay development of visual symptoms. 
 
Stage of Weeds: Annual weeds are easiest to control when they are small. Enhanced control of most perennial weeds 
is obtained when this product is applied at late growth stages approaching maturity . Refer to the “WEEDS 
CONTROLLED” section for more information on controlling specific weeds. 
 
Cultural Considerations: Reduced weed control could result when this product is applied to annual or perennial weeds 
that have been mowed grazed or cut and have not been allowed to regrow to the specified stage prior to application. 
 
Always use the higher specified application rate when weed growth is heavy or dense or when weeds are growing in 
an undisturbed (non-cultivated area). 
 
Reduced weed control could result when this product is applied to weeds that show signs of disease or insect damage, 
are heavily covered with dust or are surviving under poor growing conditions. 
 
Rainfastness: Rainfall within 4 hours of application could wash this product off the foliage, thus, a second application 
might be needed for adequate control. 
 
Spray Coverage: For enhanced results, spray coverage must be uniform and complete. Do not spray foliage to the 
point of runoff. 
Refer to specific use sections of this label for additional information on the minimum intervals required before re-
application of this product. 
 
Maximum Application Rates: The maximum application rates stated throughout this label are given in units of volume 
(fl. oz. or qt.) of this product per acre. However, the maximum allowed application rates apply to this product combined 
with the use of any and all other herbicides containing the active ingredient glyphosate whether applied separately or 
in a tank -mixture on a basis of total pounds of glyphosate (acid eq uivalent) per acre. If more than one glyphosate 
containing product is applied to the same site within the same year , ensure that the total use of glyphosate ( lb. acid

Page 4 of 143 
 
equivalent) does not exceed the maximum allowed. See the “INGREDIENTS” section of this label for necessary product 
information. 
 
Except otherwise specified in a crop section of this label , the combined total application of this product on a site must 
not exceed 160 fluid ounces (5 qt.) equivalent to 6 pounds of glyphosate acid per acre per year. For applications on 
non- crop sites or on tree vine or shrub crop production sites , the combined total application of this product must not 
exceed 216 fluid ounces (6.75 qt.) equivalent to 8 pounds of glyphosate acid per acre per year. 
 
WEED RESISTANCE MANAGEMENT 
GLYPHOSATE GROUP 9 HERBICIDE 
For resistance management, this product is a Group 9 mode of action herbicide. Any weed population may contain or 
develop plants naturally resistant to this product and other Group 9 mode of action herbicides. The resistant biotypes 
may dominate the weed population if these herbicides are used repeatedly in the same field. Appropriate resistance 
management strategies should be followed. 
 
To delay herbicide resistance, take one or more of the following steps: 
• Rotate the use of this product or other Group 9 herbicides within a growing season sequence or among growing 
seasons with different herbicide groups that control the same weeds in a field. 
• Use tank mixtures with herbicides from a different group if such use is permitted; where information on resistance in 
target weed species is available, use the less resistance- prone partner at a rate that will control the target weed(s) 
equally as well as the more resistance-prone partner. Consult your local extension service or certified crop advisor if 
you are unsure as to which active ingredient is currently less prone to resistance. 
• Adopt an integrated weed-management program for herbicide use that includes scouting and uses historical 
information related to herbicide use and crop rotation, and that considers tillage (or other mechanical control 
methods), cultural ( e.g., higher crop seeding rates; precision fertilizer application method and timing to favor the crop 
and not the weeds), biological (weed-competitive crops or varieties) and other management practices. 
• Scout before and after herbicide application to monitor weed populations for early signs of resistance development. 
Indicators of possible herbicide resistance include: (1) failure to control a weed species normally controlled by the 
herbicide at the dose applied, especially if control is achieved on adjacent weeds; (2) a spreading patch of non-
controlled plants of a particular weed species; (3) surviving plants mixed with controlled individuals of the same 
species. If resistance is suspected, prevent weed seed production in the affected area by an alternative herbicide 
from a different group or by a mechanical method including hoeing or tillage. Prevent movement of resistant weed 
seeds to other fiel ds by cleaning harvesting and tillage equipment when moving between fields and planting clean 
seed. 
• If a weed pest population continues to progress after treatment with this product, discontinue use of this product, and 
switch to another management strategy or herbicide with a different mode of action, if available. 
• Contact your local extension specialist or certified crop advisors for additional pesticide resistance- management 
and/or integrated weed-management directions for specific crops and weed biotypes. 
• For further information or to report suspected resistance, contact Drexel Chemical Company representatives at (901) 
774-4370. 
 
Manage weed seed at and after harvest to prevent buildup of the weed seed bank. 
 
To determine if resistance in any particular weed biotype has been confirmed in your area, visit the internet at 
www.weedscience.org. 
 
MIXING 
Spray solutions of this product may be mixed, stored, and applied using c lean stainless steel fiberglass, plastic or 
plastic lined steel containers. 
 
DO NOT MIX STORE OR APPLY THIS PRODUCT OR SPRAY SOLUTIONS OF THIS PRODUCT IN GALVANIZED 
STEEL OR UNLINED STEEL (EXCEPT STAINLESS STEEL) CONTAINERS OR SPRAY TANKS. 
 
Eliminate any risk of siphoning the contents of the tank back into the carrier source while mixing. Use approved anti- 
back siphoning devices where required by State or local regulations. 
 
A 50 mesh nozzle screen or line strainer on the spray equipment is sufficient. 
 
Clean sprayer parts promptly after using this product by thoroughly flushing with water. 
 
Mixing with Water 
This product mixes readily with water. Mix spray solutions of this product as follows: 
Fill the mixing or spray tank with the required amount of water. Add the specified amount of this product near the end 
of the filling process and mix well. During mixing, foaming of the spray solution may occur. To prevent or minimize

Page 5 of 143 
 
foaming, mix gently, terminate by-pass and return lines at the bottom of the tank , and if needed, use a n appropriate 
antifoam or defoaming agent. 
 
PERFORMANCE OF THIS PRODUCT CAN BE SIGNIFICANTLY REDUCED IF WATER CONTAINING SOIL 
SEDIMENT IS USED AS C ARRIER. DO NOT MIX THIS PRODUCT WITH WATER FROM PONDS OR DITCHES 
THAT IS VISIBLY MUDDY OR MURKY. 
 
Tank-Mixtures 
This product does not provide residual weed control. This product may be tank-mixed with other herbicides to provide 
residual weed control, broader weed control spectrum or an alternate mode of action. It is the pesticide user’s 
responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions 
and limitations and directions for use on all product labels involved in tank-mixing. Users must follow the most restrictive 
directions for use and precautionary statements of each product in the tank-mixture. 
 
Some tank-mix products have the potential to cause crop injury under certain conditions at certain growth stages and/or 
under other circumstances Read the label of all products to be used in the tank-mixture prior to use to determine the 
potential for crop injury. 
 
Tank-mixtures with other pesticides, micronutrients or foliar fertilizers could result in reduced weed control or crop injury. 
Manufacturer has not tested all tank-mix products for compatibility, antagonism or reduction in product performance To 
the extent consistent with applicable law, Buyer and all users are responsible for any and all loss or damage in 
connection with the use or handling of tank-mixtures of this product with other pesticides or materials. 
 
When a tank -mix with a generic active ingredie nt including Atrazine, 2,4-D, Dicamba, Diuron, Pendimethalin or any 
other product or material is listed on this label , it is the pesticide user’s responsibility to ensure that all products are 
registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all 
product labels involved in tank -mixing. Users must follow th e most restrictive directions for use and precautionary 
statements of each product in the tank-mixture. 
 
For enhanced results apply tank -mixtures with this product at a minimum spray volume rate of 10 gallons per acre , 
unless otherwise specified. 
 
Tank-Mixing Procedure 
Refer to all individual product labels, supplemental labeling and Fact Sheets for all products in the tank mixture, and 
observe all precautions and limitations on the label, including any application timing restrictions, soil restrictions, 
minimum re-cropping intervals and/or crop rotation restrictions. Use according to the most restrictive precautionary 
statements for each product in the tank mixture. 
If compatibility of the tank-mixture product(s) is not known, predetermine the compatibility in the carrier by mixing small 
proportional quantities in advance. 
Mix only the quantity of spray solution that will be applied that day. Application of tank-mix solutions that were allowed 
to stand overnight could result in reduced weed control. 
Prepare the tank-mixtures of this product as follows: 
1. Place a 20 to 35 mesh screen or wetting basket over filling port of the tank. 
2. Through the screen, fill the spray tank one-half full with water and start agitation. 
3. If ammonium sulfate is used, add it slowly through the screen into the tank. If dry ammonium sulfate is being used, 
ensure that it is completely dissolved in the tank before adding other products. 
4. If a wettable powder is used, make a slurry with the water carrier, and add it SLOWLY through the screen into the 
tank. Continue gentle agitation. 
5. If a flowable formulation is used, premix one part flowable with one part water. Add diluted mixture SLOWLY through 
the screen into the tank. Continue gentle agitation. 
6. If an emulsifiable concentrate formulation is used, premix one part emulsifiable concentrate with two parts water. 
Add diluted mixture slowly through the screen into the tank. Continue gentle agitation. 
7. Continue filling the spray tank with water and add the required amount of this product near the end of the filling 
process. 
8. [Optional label statement: If a nonionic surfa ctant is used, add it to the tank before completing the filling 
process.] 
9. Add individual formulations to the spray tank as follows: wettable powder, flowable s, emulsifiable concentrate, drift 
reduction additive and water soluble liquid (this product) (optional text: ,surfactant). 
 
Maintain gentle agitation at all times until the contents of the tank are sprayed. If the spray mixture is allowed to settle, 
agitate thorough to resuspend the mixture before spraying is resumed. 
Keep by-pass line on or near the bottom of the tank to minimize foaming. 
A 50 mesh nozzle screen or line strainer on the spray equipment is sufficient.

Page 6 of 143 
 
Mixing Spray Solution Concentrations 
All reference throughout this label to concentration of this product in a spray solution is on a percentage of volume 
basis. 
Prepare the desired volume of spray solution by mixing the amount of this product in water as shown in the following 
table: 
 
 SPRAY SOLUTION 
Desired 
Volume 
Amount of This Product 
0.3% 0.6% 0.9% 1.3% 3.1% 6.2% 
1 gal. 0.4 fl. oz. 0.8 fl. oz. 1.2 fl. oz. 1.7 fl. oz. 4 fl. oz. 8 fl. oz. 
25 gal. 10 fl. oz. 0.6 qt. 0.9 qt. 1.3 qt. 3.1 qt. 6.2 qt. 
100 gal. 1.2 qt. 2.4 qt. 3.6 qt. 1.3 gal. 3.1 gal. 6.2 gal. 
2 tablespoons = 1 fluid ounce (fl. oz.) 
 
For use in backpack and pump-up sprayers, consider mixing the specified amount of this product with water in larger 
container and then filling the sprayer from the larger container. 
 
Surfactants 
Although not always required, surfactant may be added to spray solutions of this product. However, additional surfactant 
can increase the performance of this product at water carrier volumes above 30 gallons per acre or at application rates 
below 15 fluid ounces of product per acre. 
 
Nonionic surfactants that are labeled for use with herbicides may be used. Do not reduce rates of this product when 
adding surfactant. Use a surfactant concentration of 0. 25 to 0.5% (1 to 2 qt./100 gal. of spray solution) when adding 
surfactant that contains at least 70% active ingredient or 1% surfactant concentration (4 qt./100 gal. of spray solution) 
when adding surfactant that contains less than 70% active ingredient. Read and carefully observe all precautionary 
statements and other information on the surfactant label. 
 
[Optional label text: DO NOT add buffering agents or pH adjusting agents to the spray solution when this product is 
the only pesticide product being applied.] 
 
DO NOT ADD ADDITIONAL SURFACTANT OR ADDITIVES CONTAINING SURFACTANT TO THIS PRODUCT FOR 
PRE-HARVEST APPLICATION TO COTTON OR ANY POST- EMERGENCE (IN- CROP) APPLICATION TO LISTED 
GLYPHOSATE TOLERANT COTTON VARIETIES.] 
 
Ammonium Sulfate 
Unless otherwise directed, the addition of 1 to 2 % dry ammonium sulfate by weight or 8.5 to 17 pounds per 100 gallons 
of water may increase the performance of this product particularly under hard water conditions, drought conditions or 
when tank-mixed with certain residual herbicides on annual and perennial weeds. An equivalent rate of ammonium 
sulfate in liquid formulation may also be used. Ensure that dry ammonium sulfate is completely dissolved in the spray 
tank before adding herbicides. Thoroughly rinse the spray system with clean water after use to reduce corrosion. 
 
Note: When using ammonium sulfate, apply this product at rates specified in this label. Lower rates will result in 
reduced performance. 
 
Colorants or Dyes 
Colorants or marking dyes may be added to spray solutions of this product, however, they may reduce performance of 
this product. Use colorants or dyes according to the manufacturer's directions. 
 
Drift Reduction Additives 
Drift reduction additives may be used with all equipment types, except wiper applicators, sponge bars and Controlled 
Droplet Applicator (CDA) equipment. When a drift reduction additive is used, read and c arefully observe the 
precautionary statements and all other information appearing on the additive label. The use of drift reduction additives 
can affect spray coverage which could result in reduced performance of this product. 
 
APPLICATION EQUIPMENT AND TECHNIQUES 
This product may be applied using the following application equipment: 
 
Aerial Application Equipment—Fixed Wing and Helicopter

Page 7 of 143 
 
Ground Application Equipment— Boom or boomless systems, pull -type sprayer s, floaters, pick -up sprayers, 
spray coupes, and other ground broadcast application equipment. 
 
Handheld and Backpack Sprayers—Knapsack and backpack sprayers, pump-up pressure sprayers, handguns, 
handwands, mistblowers*, lances, and other handheld and motorized spray equipment used to direct the spray onto 
weed foliage. 
*This product is not registered in California or Arizona for use in mistblowers. 
 
Selective Application Equipment—Recirculating sprayers, shielded and hooded sprayers, wiper applicators, and 
sponge bars. 
 
Injection Systems—Aerial or ground injection sprayers. 
 
Controlled Droplet Applicator (CDA) —Handheld or boom -mounted applicators that produce a spray pattern 
consisting of a narrow range of droplet sizes. 
 
APPLY THIS PRODUCT IN PROPERLY MAINTAINED AND CALIBRATED EQUIPMENT CAPABLE OF DELIVERING 
DESIRED VOLUMES. 
 
Do not apply this product through any type of irrigation equipment. 
 
MANDATORY SPRAY DRIFT 
Ground Boom Applications: 
• User must only apply with the release height recommended by the manufacturer, but no more than 4 feet 
above the ground or crop canopy. 
• Applicators are required to use a medium or coarser droplet size (ASABE S572.1) unless tank -mixing with a 
pesticide product that requires use of a finer droplet size. If a finer droplet size is used, applicators are required 
to use a fine or coarser droplet size (ASABE S572.1) 
• Do not apply when wind speeds exceed 15 miles per hour at the application site. 
• Do not apply during temperature inversions. 
Aerial Applications: 
• Do not release spray at a height greater than 10 ft. above the ground or vegetative canopy, unless a greater 
application height is necessary for pilot safety. 
• Applicators are required to use a medium or coarser droplet size (ASABE S572.1) unless tank -mixing with a 
pesticide product that requires use of a finer droplet size. If a finer droplet size is used, applicators are required 
to use a finer or coarser droplet size (ASABE S572.1). 
• If the windspeed is 10 miles per hour or less, applicators must use ½ swath displacement upwind at the 
downwind edge of the field. When the windspeed is 11-15 miles per hour, applicators must use ¾ swath 
displacement upwind at the downwind edge of the field. 
• Do not apply when wind speeds exceed 15 mph at the application site. If the windspeed is greater than 10 
mph, the boom length must be 65% or less of the wingspan for fixed-wing aircraft and 75% or less of the rotor 
diameter for helicopters. Otherwise, the boom length must be 75% or less of the wingspan for fixed-wing 
aircraft and 90% or less of the rotor diameter for helicopters. 
• Do not apply during temperature inversions. 
Boomless Ground Applications: 
• Applicators are required to use a medium or coarser droplet size (ASABE S572.1) unless tank -mixing with a 
pesticide product that requires use of a finer droplet size. If a finer droplet size is used, applicators are required 
to use a fine or coarser droplet size (ASABE S572.1). 
• Do not apply when wind speeds exceed 15 miles per hour at the application site. 
• Do not apply during temperature inversions. 
AVOID CONTACT OF THIS HERBICIDE WITH FOLIAGE, [Optional text: GREEN] STEMS, EXPOSED NON-WOODY 
ROOTS OR FRUIT OF CROPS, DESIRABLE PLANTS AND TREES, [Optional text, if applicable: EXCEPT AS

Page 8 of 143 
 
DIRECTED FOR USE ON Glyphosate resistant LISTED GLYPHOSATE CROPS,] AS SEVERE PLANT INJURY OR 
DESTRUCTION COULD RESULT. 
Do not allow the herbicide solution to mist, drip, drift or splash onto desirable vegetation, as small quantities of this 
product can cause severe damage or destruction to the crop, plants or other vegetation on which application was not 
intended. 
AVOID DRIFT. USE EXTREME CARE TO PREVENT INJURY TO DESIRABLE PLANTS AND CROPS WHEN 
APPLYING THIS PRODUCT. 
Avoiding spray drift at the application site is the responsibility of the applicator. The interaction of many equipment and 
weather-related factors determines the potential for spray drift. The applicator and grower are responsible for 
considering all these factors when making decisions regarding the application of this product. 
The likelihood of injury occurring as the result of spray drift while applying this product increases when winds are gusty, 
as wind velocity increases, when wind di rection is constantly changing or when there are other meteorological 
conditions that favor spray drift. When spraying, avoid combinations of pressure and nozzle type that will result in 
splatter or generation of fine particles (mist) that are likely to drift. 
TO PREVENT INJURY TO ADJACENT DESIRABLE VEGETATION, APPROPRIATE BUFFERS MUST BE 
MAINTAINED. 
AVOID APPLYING THIS PRODUCT AT EXCESSIVE SPEED OR SPRAYER PRESSURE. 
Nonselective Control of Annual Weeds in Small Grain Cropping Systems 
Refer to the "WEEDS CONTROLLED" section of this label for rates and weeds controlled. Apply in 3 to 5 gallons of 
water per acre by ground and 2 to 3 gallons of water per acre for aerial applications. 
 
AVOID DRIFT. EXTREME CARE MUST BE USED WHEN APPLYING THIS PRODUCT TO PREVENT INJURY TO 
DESIRABLE PLANTS AND CROPS. 
 
Do not allow the herbicide solution to mist, drip, drift, or splash onto desirable vegetation since minute quantities 
of this herbicide can cause severe damage or destruction to the crop, plant s or other areas on which treatment 
was not intended. The likelihood of injury occurring from the use of this product is greatest when winds are gusty 
or in excess of 5 mph or when other conditions, including lesser wind velocities, will allow spray drift to occur. 
When spraying, avoid combinations of pressure and nozzle type that will result in splatter or fine particles (mist) 
that are likely to drift. AVOID APPLYING AT EXCESSIVE SPEED OR PRESSURE. Note: To prevent injury to 
adjacent desirable vegetation, appropriate buffer zones must be maintained. 
 
Adjust boom height on ground equipment to prevent streaked, overlapped or uneven applications. Coarse sprays 
are less likely to drift; therefore, do not use nozzles or nozzle configurations that dispense spray as fine spray 
droplets. In aerial applications, do not angle nozzles forward into the airstream and do not increase spray volume 
by increasing nozzle pressure. Ensure uniform application. Use appropriate marking devices when applying 
herbicides by air. Av oid spraying when weeds are subject to moisture stress, when dust is on foliage, or when 
straw canopy covers the weeds. 
 
Thoroughly wash aircraft, especially landing gear, after each day of spraying to remove residue of this product 
accumulated during spraying or from spills. PROLONGED EXPOSURE OF THIS PRODUCT TO UNCOATED 
STEEL SURFACES MAY RESULT IN CORROSION AND POSSIBLE FAILURE OF PART. LANDING GEAR IS 
MOST SUSCEPTIBLE. The maintenance of an organic coating (paint) which meets aerospace specification MIL-
C-38413 may prevent corrosion. 
 
AERIAL APPLICATION EQUIPMENT 
Unless otherwise prohibited, all applications of this product described on this label may be made using aerial application 
equipment where appropriate provided that the applicator complies with the precautions and restrictions specified on 
this label and on separate supplemental labeling published for this product. 
 
DO NOT APPLY THIS PRODUCT USING AERIAL APPLICATION EQUIPMENT EXCEPT UNDER CONDITIONS 
SPECIFIED ON THIS LABEL OR ON SEPARATELY PUBLISHED SUPPLEMENTAL LABELING FOR THIS 
PRODUCT.

Page 9 of 143 
 
FOR SPECIFIC USE INSTRUCTIONS, RESTRICTIONS AND REQUIREMENTS IN CALIFORNIA AND ARKANSAS, 
REFER TO THE SECTIONS “AERIAL APPLICATION IN CALIFORNIA INCLUDING FRESNO COUNT RY” AND 
“AERIAL APPLICATION IN ARKANSAS”, RESPECTIVELY. 
 
Apply this product using the specified rate in 3 to 15 gallons of water per acre unless otherwise directed on this label 
or on separate supplemental labeling for this product. Unless otherwise directed, the maximum single application rate 
of this product is 40 fluid ounces per acre when using aerial application equipment. 
 
For “FORESTRY, INDUSTRIAL, UTILITY RIGHTS-OF-WAY, TURF, AND ORNAMENTALS” : Apply the specified rates 
of this product in 3 to 25 gallons per acre by air unless otherwise directed. Use a larger spray volume within this range 
where weeds, brush, trees, and vines are dense or form multiple canopy layers. Avoid direct application to any body of 
water. 
 
Refer to the individual use sections of this label for application rates, spray volumes and additional directions 
for use. 
 
Drift control additives may be used. 
 
Ensure uniform application — To avoid streaked, uneven or overlapped application, use appropriate marking devices. 
 
Aircraft Maintenance: Thoroughly wash aircraft, especially landing gear, after each day of spraying to remove 
residues of this product accumulated during spraying or fr om spills. PROLONGED EXPOSURE OF THIS 
PRODUCT TO UNCOATED STEEL SURFACES MAY RESULT IN CORROSION AND POSSIBLE FAILURE OF 
THE PART. LANDING GEAR IS MOST SUSCEPTIBLE. The maintenance of an organic coating (paint), which 
meets aerospace specification MIL-C-38413, may prevent corrosion. 
 
AERIAL SPRAY DRIFT MANAGEMENT 
The following drift management requirements must be followed to avoid off -target drift movement from aerial 
applications to agricultural field crops. 
1. The distance of the outermost nozzles on the boom must not exceed three-fourths the length of the wingspan or 
rotor. 
2. Nozzles must always point backward, parallel with the air stream and never be pointed downwards more than 45 o. 
Observe more stringent regulations in states where applicable. 
 
SPRAY DRIFT ADVISORIES 
Importance of Droplet Size 
The most effective way to reduce drift potential is to apply large droplets. Use the largest droplets that pro vide target 
pest control. While applying larger droplets will reduce spray drift, the potential for drift will be greater if application s 
are made improperly or under unfavorable environmental conditions 
 
Controlling Droplet Size 
• Volume: Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with the higher rated flows 
produce larger droplets. 
• Pressure: Use the lower spray pressures listed for the nozzle. Higher pressure reduces droplet size and does not 
improve canopy penetration. When higher flow rates are needed, use higher flow rate nozzles instead of increasing 
pressure. 
Spray Nozzle: Use a spray nozzle that is designed for the intended application. Consider using nozzles designed to 
reduce drift. 
• Number of Nozzles: Use the minimum number of nozzles that provide uniform coverage. 
• Nozzle Orientation: Orienting nozzles so that the spray is released backwards, parallel to the airstream, will produce 
larger droplets than other orientations. Significant deflection from the horizontal will reduce droplet size and increase 
drift potential. 
• Nozzle Type: Use a nozzle type that is designed for the intended application. With most nozzle types, narrower spray 
angles produce larger droplets. Consider using low-drift nozzles. Solid stream nozzles oriented straight back produce 
larger droplets than other nozzle types. 
• Boom Length: For some use patterns, r educing the effective boom length to less than three-fourths of the wingspan 
or rotor length may further reduce drift without reducing swath width. 
• Application Height: Do not make applications at a height greater than 10 feet above the top of the largest plants unless 
a greater height is required for aircraft safety. Making applications at the lowest height that is safe reduces the 
exposure of the droplets to evaporation and wind. 
 
Controlling Droplet Size 
Aircraft: 
Adjust nozzles: Follow nozzle manufacturer’s recommendations for setting up nozzles. Generally, to reduce fine 
droplets, nozzles should be oriented parallel with the airflow in flight.

Page 10 of 143 
 
BOOM HEIGHT 
Ground Boom 
For ground equipment, the boom should remain level with the crop and have minimal bounce. 
 
RELEASE HEIGHT 
Aircraft 
Higher release heights increase the potential for spray drift. 
 
SHIELDED SPRAYERS 
Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify that the 
shields are not interfering with the uniform deposition of the spray on the target area. 
 
TEMPERATURE AND HUMIDITY 
When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation. 
 
TEMEPERATURE INVERSIONS 
Drift potential is high during a temperature inversion. Temperature inversions restrict vertical air mixing, which can 
cause small droplets to remain suspended in a concentrate cloud. This cloud can move in unpredictable directions due 
to the light variable winds common during inversions. Temperature inversions are characterized by increasing 
temperatures with altitude and are common on nights with limited cloud cover and light to no wind. They begin to form 
as the sun sets and often continue into the morning. Their presence can be indicated by ground fog. ; however, Iif If 
fog is not present, inversions can also be identified by the movement of smoke from a ground source or an aircraf t 
smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates 
an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing. 
 
Swath Adjustment 
When application s are made with a crosswind, the swath will be displaced downwind. Therefore, on the up and 
downwind edges of the field, the applicator must compensate for this displacement by adjusting the path of the aircraft 
upwind. Increase swath adjustment distance i ncrease, with increasing drift potential (higher wind, smaller droplets, 
etc.). 
 
Wind 
Drift potential generally increases with wind speed. AVOID APPLICATIOS DURING GUSTY WIND CONDITIONS. 
Applicators need to be familiar with local wind patterns and terrain that could affect spray drift. 
 
SPRAY DIFT ADVISORIES 
Boomless Ground Applications: 
Setting nozzles at the lowest effective height will help reduce the potential for spray drift. 
 
Handheld Technology Applications: 
Take precautions to minimize spray drift. 
Sensitive Areas 
Apply this product only when the potential for drift to adjacent s ensitive areas (e.g. residential areas, bodies of water, 
known habitat for threatened or endangered species, non-target crops) is minimal (e.g. when wind is blowing away 
from the sensitive areas). Avoid direct application to any body of water. 
 
CALIFORNIA SPECIFIC 
AERIAL APPLICATION IN CALIFORNIA INCLUDING FRESNO COUNTY 
 
Do not apply this product using aerial application equipment in residential areas. 
 
AVOID DRIFT. DO NOT APPLY WHEN WINDS ARE GUSTY OR UNDER ANY OTHER CONDITION THAT 
FAVORS DRIFT. DRIFT CAN CAUSE DAMAGE TO ANY VEGETATION CONTACTED TO WHICH APPLICATION 
WAS NOT INTENDED. TO PREVENT INJURY TO ADJACENT DESIRABLE VEGETATION, USE PROPER AERIAL 
APPLICATION EQUIPMENT FITTED WITH APPROPRIATE NOZZLES AND MAINTAIN ADEQUATE BUFFERS. 
 
Follow the directions below when making aerial application near non- target crops or desirable annual or perennial 
vegetation after bud break and before total leaf drop. 
 
1. Do not apply within 100 feet of all desirable vegetation or non-target crop(s). 
2. If wind up to 5 miles per hour is blowing toward desirable vegetation or non- target crop(s), do not apply within 500 
feet of the desirable vegetation or crop(s). 
3. Winds blowing from 5 to 10 m iles per hour toward desirable vegetation or non-target crop(s) may require buffer 
zones greater than 500 feet to protect desirable vegetation or crop(s). 
4. Do not apply when winds are in excess of 10 miles per hour or when inversion conditions exist.

Page 11 of 143 
 
 
When tank -mixing this product with 2 ,4-D, only 2 ,4-D Amine formulations may be used for aerial application in 
California. Tank-mixtures with 2, 4-D Amine formulations may be applied by air in California for fallow fields and in 
reduced tillage systems and for Alfalfa and pasture renovation applications only. 
 
This product when tank-mixed with Dicamba may not be applied by air in California. 
 
ADDITIONAL LIMITATIONS FOR AERIAL APPLICATION IN FRESNO COUNTY , CALIFORNIA ONLY (Only from 
February 15 through March 31) 
 
Applicable Area 
• North: Fresno County line 
• South: Fresno County line 
• East: State Highway 99 
• West: Fresno County line 
 
Use Information 
Observe the following directions to minimize off-site movement during aerial application of this product. Minimization of 
off-site movement is the responsibility of the grower, Pest Control Advisor, and aerial applicator. 
 
Written Directions 
Written directions MUST be submitted by or on behalf of the applicator to the Fresno County Agricultural Commissioner 
24 hours prior to the application. These written directions MUST state the proximity of the surrounding crops, and that 
conditions of each manufacturer's applicable product label(s) and this label have been satisfied. 
 
Aerial Applicator Training and Equipment 
Aerial application of this product is limited to pilots who have successfully completed a Fresno County Agricultural 
Commissioner and California Departm ent of Pesticide Regulation approved training program for aerial application of 
herbicides. All aircraft must be inspected, critiqued in flight, and certified at a Fresno County Agricultural Commissioner 
approved fly-in. Test and calibrate spray equipment at intervals sufficient to ensure that proper rates of herbicides and 
adjuvants are being applied during commercial use. Applicator must document such calibrations and testing. 
Demonstration of performance at Fresno County Agricultural Commissioner approved fly -ins constitutes such 
documentation, or other written records showing calculations and measurements of flight and spray parameters 
acceptable to the Fresno County Agricultural Commissioner. 
 
Applications at Night 
Do not apply this product by air earlier than 30 minutes prior to sunrise and/or later than 30 minutes after sunset without 
prior permission from the Fresno County Agricultural Commissioner. 
For additional information on the proper aerial application of this product in Fresno County, call (901) 774-4370. 
 
AERIAL APPLICATION IN ARKANSAS 
Avoid drift. Do not apply into still air where there is temperature inversion layer low enough for fine spray particles to 
become suspended and moved outside the target area when the inversion layer moves. Do not apply when winds are 
gusty or under any other condition that favors drift. Drift is likely to cause damage to any vegetation contacted. To 
prevent injury to adjacent desirable vegetation, appropriate buffer zones must be maintained. 
 
Use the specified rate of this product in 3 to 15 gallons of water per acre. 
 
Use sufficient carrier volume and appropriate equipment set -up to form droplets large enough to avoid drift potential. 
Coarse droplets in the 300 to 500 (VMD) micron range have lower drift potential. 
 
Applications typically are to be made with the nozzle release point at 8 to 15 feet above the top of the target plants 
unless a greater height is required for aircraft safety. 
 
The distance of the outermost nozzles on the boom must not exceed 75 % of the length of the wingspan or rotor. In 
many cases, reducing this distance to 65% of the length of the wingspan or rotor will improve drift control without 
affecting the swath width. 
 
Nozzles must always discharge backward parallel with the air stream and never discharge downwards more than 45 
degrees on fixed wing aircraft or forward of the prevailing airflow on rotary winged aircraft. Avoid the use of nozzles 
with wide-angle discharge. 
 
Do not apply this product when winds are in excess of 10 miles per hour.

Page 12 of 143 
 
Do not apply when there is a low -level inversion where fine spray particles could be suspended in still air and move 
outside the target area when the inversion layer moves. These conditions may occur when wind speeds are less than 
2 miles per hour. 
 
Use the following directions when an aerial application is made near non-target crops or other desirable vegetation: 
1. Do not apply within 100 feet of non-target crops or any desirable vegetation. 
2. If wind up to 5 miles per hour is blowing toward non-targ et crops or desirable vegetation, do not apply this product 
within 500 feet upwind of the desirable vegetation or crop. 
3. If wind is blowing between 5 to 10 miles per hour toward non-target crops or desirable vegetation, a buffer zones 
greater than 500 feet might be needed to protect the crop or desirable vegetation. 
 
GROUND APPLICATION EQUIPMENT 
Apply this product at the appropriate rate in 3 to 60 gallons of water per acre when making a broadcast application 
using ground application equipment unless otherwise directed on this label or on separate supplemental labeling or 
Fact Sheets published for this product . As the weed density increases , increase the spray volume towards the upper 
end of this range to ensure complete coverage. Use nozzles that will avoid generating a fine mist. For enhanced results 
with ground application equipment use flat fan nozzles. Check spray pattern for uniform distribution of spray droplets. 
 
HANDHELD SPRAYERS 
When using a handheld sprayer, apply spray solutions of this product uniformly and completely to the foliage of target 
weeds using a coarse droplet spectrum and a spray -to-wet technique; do not spray to the point of runoff. For the 
appropriate concentration of this product in the spray solution and timing of application to control certain weeds, woody 
brush, trees and vines, refer to the “WEEDS CONTROLLED” section of this label as well as the section on “WEEDS 
CONTROLLED – FORESTRY, INDUSTRIAL, UTILITY RIGHTS-OF-WAY, TURF, AND ORNAMENTAL SITES” found 
at the end of this label. 
 
For control of annual weeds using handheld sprayers in “FORESTRY, INDUSTRIAL, UTILITY RIGHTS -OF-WAY, 
TURF, AND ORNAMENTAL SITES”, make application when weeds are small and prior to seedhead formation or bud 
formation. For control of perennials, woody brush, trees and vines, make application after flowering and before Fall 
color and leaf drop. 
 
Spot treatment application of this product for weed control in a cropping system using a handheld sprayer may be made 
only when specifically directed on this label or on separate supplemental labeling for this product. The crop sprayed 
with this product will be killed along with the weeds. Take care not to spray or allow spray to drift outside the target area 
to avoid unwanted crop destruction. 
 
When making a low volume directed spray application in “FORESTRY, INDUSTRIAL, UTILITY RIGHTS -OF-WAY, 
TURF, AND ORNAMENTAL SITES” to control annual and perennial weeds, woody brush, trees and vines using a 
handheld sprayer, ensure that at least 50% to 75% of the foliage or the top one-half of each unwanted plant is sprayed. 
If a straight stream nozzle is used, start the application at the top of the targeted plant and spray from top to bottom in 
a lateral zig-zag motion. To ensure uniform and complete coverage, spray both sides of large or tall woody brush, trees 
and vines or when foliage is thick and dense or where there are multiple sprouts. For enhanced results on woody brush, 
trees and vines, apply to actively growing vegetation after full leaf expansion and flowering prior to Fall color and leaf 
drop. 
 
The following table summarizes various methods of foliar application using a backpack sprayer with a spray -to-wet or 
low volume directed spray technique and high volume sprayer application using handheld application equipment for 
control or partial control of herbaceous weeds, woody brush, trees and vines listed in “WEEDS CONTROLLED - 
FORESTRY, INDUSTRIAL, UTILITY RIGHTS -OF-WAY, TURF, AND ORNAMENTAL SITES ” found under 
“FORESTRY, INDUSTRIAL, UTILITY RIGHTS-OF-WAY, TURF, AND ORNAMENTAL SITES” section of this label. 
 
Method of Application Concentration of Spray 
Solution (% by Volume) 
Spray Volume 
Handgun or Backpack Sprayer 1.3 Spray-to-wet 
Low Volume Directed Spray (Backpack, Handgun, 
Mistblower) 
3.1 to 6.2 15 to 25 gal./A 
Modified High Volume Spray 1.3 to 2.8 40 to 60 gal./A 
 
Low volume directed spray application with a backpack sprayer works best when applying to weeds and brush less 
than 10 feet tall. For taller weeds and brush, a high volume handgun can be modified by reducing the nozzle size and 
spray pressure to produce a modified high volume directed spray application. 
 
SELECTIVE APPLICATION EQUIPMENT 
Selective application equipment allows this product to be applied to weeds growing near the crop or other desirable 
vegetation without killing the desirable vegetation. Selective application equipment must be capable of preventing all

Page 13 of 143 
 
contact of the herbic ide solution with the crop or other desirable vegetation and operated without spray mist escape, 
leakage or dripping of the herbicide solution. 
 
AVOID CONTACT OF THIS HERBICIDE WITH DESIRABLE VEGETATION. Contact of this product with desirable 
vegetation could result in unwanted plant damage or destruction. 
 
In “FORESTRY, INDUSTRIAL, UTILITY RIGHTS-OF-WAY, TURF, AND ORNAMENTAL SITES”, this product may be 
diluted with water and applied using a recirculating sprayer, shielded sprayer, hooded sprayer, wiper applicator or 
sponge bar to weeds growing on any terrestrial non-food or non-feed crop sites listed under “WEEDS CONTROLLED 
- FORESTRY, INDUSTRIAL, UTILITY RIGHTS-OF-WAY, TURF, AND ORNAMENTAL SITES” at the end of this label 
where feasible. This product may also be used with sprayers equipped with optical weed sensor technology. Other 
selective equipment that may be used in “FORESTRY, INDUSTRIAL, UTILITY RIGHTS -OF-WAY, TURF, AND 
ORNAMENTAL SITES” to deliver or apply this product are a single and hollow stem injectors, tree injectors, wiper 
applicators for cut stem and cut stump applications and spray or squirt bottles for cut stem, cut stump and frill 
applications to control large stemmed weeds, brush, trees and vines listed under “WEEDS CONTROLLED - 
FORESTRY, INDUSTRIAL, UTILITY RIGHTS-OF-WAY, TURF, AND ORNAMENTAL SITES” at the end of this label 
 
Shielded and Hooded Sprayers 
A shielded sprayer directs the herbicide solution to the target weeds while protecting the crop or other desirable 
vegetation from coming into contact with the herbicide spray with an impervious material or shield. Use nozzles that 
provide uniform coverage within the application area. Keep shields properly adjusted to protect desirable vegetation. 
 
A hooded sprayer is a type of shielded sprayer where the spray pattern is fully enclosed, including the top, sides, front 
and back, thereby shielding the crop or other desirable vegetation from the spray solution. 
 
This product may be diluted in water and applied using a shielded or hooded sprayer to weeds listed on this label 
growing on any non-crop site described on this label and in between rows of plants (row middles) in any cropping 
system listed on this label. 
 
Properly adjust the hood to protect desirable vegetation. Ensure that the hood is capable of completely enclosing the 
spray pattern. If necessary when applying around crops grown on raised beds, extend the front and rear flaps of the 
hooded sprayer downward to reach the ground in deep furrows. 
 
A hooded sprayer must be configured and operated in a manner that minimizes bouncing and avoids raising the hood 
up off the ground surface at any time. If the hood is raised, spray particles can escape and come into contact with the 
crop, causing damage to or destruction of the crop or other desirable vegetation. Avoid operating this equipment on 
rough or sloping terrain where the spray hood is likely to rise up off the ground surface. 
 
Use hoods designed to minimize excessive dripping or run-off down the insides of the hoods. A single, low pressure/low 
drift flat-fan nozzle with an 80 to 95 degree spray angle positioned at the top center of the hood is recommended. Use 
spray volume of 20-30 gallons per acre. 
 
The following procedures will reduce the potential for crop injury when using a hooded sprayer: 
• Operate the spray hoods on the ground or skimming across the ground. 
• Leave at least an 8 inch untreated strip over the drill row. For example, if the crop row width is 38 inches, the maximum 
width of the spray hood should be 30 inches. 
• Operate at a ground speed of no greater than 5 miles per hour to minimize bouncing of the hooded sprayer. 
• Apply when wind speed is 10 miles per hour or less. 
• Use low-drift nozzles that provide uniform coverage within the treated area. 
 
Injury to c rop and other desirable vegetation can occur when application is made to foliage of weeds that come into 
direct contact with leaves of the crop or desirable vegetation. Do not apply this product when the leaves of desirable 
vegetation are growing in direct contact with weeds to be t reated. Droplets, mis t, foam or splatter of the herbicide 
solution settling onto desirable vegetation can result in discoloration, stunting or destruction. 
 
Wiper Applicators 
A wiper applicator is a device that physically wipes this product or solutions of this product directly onto the target weed 
or cut stump. Any handheld device that is capable of physically wiping this product or solutions of this product directly 
onto the target weed or cut stump, including a paint brush, may be used. 
 
A mechanical wiper applicator, including a rope wick or sponge bar that can be driven through a field over the top of a 
crop or other desirable vegetation to control weeds that are taller than the desirable vegetation, must be designed, 
maintained and operated to prevent the herbicide solution from contacting desirable vegetation. 
 
Wiper applicators may be used over the top of food or feed crops ONLY if specifically permitted for use over that crop 
by this label or by separately published supplemental labeling for this product.

Page 14 of 143 
 
 
When using a mechanical wiper applicator, adjust the height of the applicator to ensure adequate contact with weeds 
and so that the wiper contact point is a minimum of 2 inches above the desirable vegetation. Enhanced results can be 
obtained when more of the weed is exposed to the herbicide solution and weeds are a minimum of 6 inches above the 
desirable vegetation. Weeds that do not come in contact with the herbicide solution will not be affected. Poor contact 
can occur when weeds are growing in dense clumps, when operating in an area of severe weed infestation, or when 
weed height varies dramatically. In these situations, more than one application of this product might be necessary. 
 
Operate wiper applicators at a ground speed of no greater than 5 miles per hour. Performance in areas of heavy weed 
infestation can be improved by reducing speed, which will provide more time for re-saturation of the wiper with the 
herbicide solution and more contact time of the wiper with the weed. Enhanced results with a wiper applicator can be 
obtained when two applications are made travelling in opposite directions in the field. 
 
Keep wiper surfaces clean. 
 
Droplets, mist, foam or splatter of the herbicide solution settling onto desirable vegetation can result in discoloration, 
stunting or destruction. Avoid leakage or dripping onto desirable vegetation. Be aware that on sloping ground the 
herbicide solution can migrate to one side, causing dripping on the lower end and drying of the wiper on the upper end 
of the applicator. 
 
Do not apply this product using a wiper applicator when weeds are wet. 
 
Do not add surfactant to the herbicide solution when using a wiper applicator. 
 
For Rope or Sponge Wick Applicators—Solutions ranging from 33 to 75% of this product in water may be used. 
 
In “FORESTRY, INDUSTRIAL, UTILITY RIGHTS -OF-WAY, TURF, AND ORNAMENTAL SITES”, solutions ranging 
from 20 to 70% of this product by volume in water may be used. 
 
For Panel Applicators —Solutions ranging from 33 to 100% of this product in water may be used in panel wiper 
applicators. 
 
In “FORESTRY, INDUSTRIAL, UTILITY RIGHTS -OF-WAY, TURF, AND ORNAMENTAL SITES”, solutions ranging 
from 20 to 100% (undiluted) of this product by volume in water may be used. 
 
Mix only the amount of this product that will be used during a 1 day period as reduced product performance can result 
from the use of solutions held in storage. 
 
Clean wiper parts promptly after using this product by thoroughly flushing with water. 
 
Recirculating Sprayer – For use in “FORESTRY, INDUSTRIAL, UTILITY RIGHTS -OF-WAY, TURF, AND 
ORNAMENTAL SITES” 
 
A recirculating sprayer directs the spray solution onto weeds growing above desirable vegetation while spray solution 
that is not intercepted by weeds is collected and returned to the spray tank for re-application. A recirculating sprayer 
may be used to ap ply spray solutions of this product to weeds listed under “WEEDS CONTROLLED - FORESTRY, 
INDUSTRIAL, UTILITY RIGHTS-OF-WAY, TURF, AND ORNAMENTAL SITES” at the end of this label in any terrestrial 
non-crop site described on this label. 
 
Single and Hollow Stem Injectors – For use in “FORESTRY, INDUSTRIAL, UTILITY RIGHTS-OF-WAY, TURF, 
AND ORNAMENTAL SITES” 
 
Control of certain weeds listed in “WEEDS CONTROLLED - FORESTRY, INDUSTRIAL, UTILITY RIGHTS OF -WAY, 
TURF, AND ORNAMENTAL SITES” at the end of this label can be obtained by injecting this concentrated product or 
solutions of this product directly in or onto the target weed. Ensure that the handheld injector being used for this 
application is capable of accurately delivering the vol ume specified on the label. When making stem injections, the 
combined total use of this product must not exceed 6.75 quarts per acre per year. At 5 milliliters (m l) of concentrated 
(undiluted) product per stem, 6.75 quarts will treat approximately 1,300 stems per acre per year. The number of stems 
that can be treated per acre will vary depending on the injection volume and the concentration of this product in the 
application solution. 
 
INJECTION SYSTEM 
This product may be used in aerial or ground injection spray systems. It may be used as a liquid concentrate or diluted 
prior to injecting into the spray stream. Do not mix this product with the concentrate of other products when usi ng 
injection systems, unless otherwise directed.

Page 15 of 143 
 
CONTROLLED DROPLET APPLICATOR (CDA) 
The amount of this product applied per acre using CDA must not be less than the amount specified in this label when 
applied by conventional broadcast application equipment. 
 
CDA produces a spray pattern that is not easily visible. Extreme care must be exercised to avoid spray or drift contacting 
the foliage or any other green tissue of desirable vegetation, as damage or destruction may result. 
 
Do not apply this product through any type of irrigation system. 
 
WEEDS CONTROLLED 
This product controls many annual and perennial grasses and broadleaf weeds listed in the following 
sections. 
 
Note: For specific use directions for controlling weeds in “FORESTRY, INDUSTRIAL, UTILITY RIGHTS-
OF-WAY, TURF, AND ORNAMENTAL SITES” , refer to “WEEDS CONTROLLED - FORESTRY, 
INDUSTRIAL, UTILITY RIGHTS-OF-WAY, TURF, AND ORNAMENTAL SITES ” section at the end of this 
label. 
 
ANNUAL WEEDS 
When water carrier volumes are between 16 and 40 gallons per acre for ground application and between 6 and 15 
gallons per acre for aerial application, the following use rates will control the annual weeds listed in the “ANNUAL 
WEEDS RATE TABLE” that follows: 
 
• 20 fluid ounces per acre - grasses and broadleaf annual weeds less than 6 inches in height or circumference 
and vines less than 3 inches in length 
• 30 fluid ounces per acre - grasses and broadleaf annual weeds 6 to 12 inches in height or circumference and 
vines 3 to 6 inches in length 
• 40 fluid ounces per acre - grasses and broadleaf annual weeds greater than 12 inches in height or 
circumference and vines greater than 6 inches in length 
 
WHEN WATER CARRIER VOLUMES ARE BETWEEN 3 AND 15 GALLONS PER ACRE FOR GROUN D 
APPLICATION AND BETWEEN 3 AND 5 GALLONS PER ACRE FOR AERIAL APPLICATION , USE THE RATES 
SPECIFIED FOR INDIVIDUAL WEEDS IN THE “ANNUAL WEEDS RATE TABLE” THAT FOLLOWS . 
 
Apply to actively growing annual weeds. New leaf development indicates active growth. 
 
Annual weeds are often easiest to control when they are small. Older mature (hardened) and otherwise tough to control 
annual weed species could require higher rates than specified in this table to be controlled even if they meet the listed 
size requirements. This product may be applied at rates of up to 40 fluid ounces per acre for tough to control annual 
weeds and where dense weed populations exist. Follow all precautions and restrictions including maximum application 
rates and crop stage timings specified in the directions for use on specific crops including Glyphosate resistant and 
Glyphosate tolerant crops and use sites listed on this label. 
 
Maximum size refers to the maximum plant height length of runners for vines or circumference of rosette plants in 
inches. 
 
Do not tank-mix this product with soil residual herbicides when using these rates unless otherwise directed. 
 
To control annual weeds using a handheld controlled droplet applicator (CDA), apply a 20% solution of this product (25 
to 26 fl. oz. of this product per gal. of spray solution) at a flow rate of 2 fluid ounces per minute and a walking speed of 
1.5 miles per hour (1 qt./A). When using a vehicle mounted CDA, apply the required amount of this product as indicated 
in the following “ANNUAL WEEDS RATE TABLE” in 2 to 15 gallons of water per acre. 
 
For weeds that have been mowed grazed or cut, allow regrowth to occur prior to application of this product. 
 
ANNUAL WEEDS RATE TABLE 
 
Annual Weeds 
Broadcast Application Rate (Fl. Oz./A) 
10 15 20 25 30 
Maximum Height/Length (inches) 
Ammannia (Purple) 3 6 12 - 18 
Anoda (Spurred) - 2 3 5 8 
Barley 18 18+ - - -

Page 16 of 143 
 
Barnyardgrass - 3 6 7 9 
Bassia (Fivehook) - - 6 - - 
Beggarweed (Florida) - 5 8 - - 
Bittercress 12 20 - - - 
Bluegrass (Annual) 10 - - - - 
Bluegrass (Bulbous) 6 - - - - 
Brome (Downy)1,2 6 12 - - - 
Brome (Japanese) 6 12 24 - - 
Browntop (Panicum) 6 8 12 - 24 
Buckwheat (Wild)3 - 1 2 - - 
Burcucumber - 6 12 - 18 
Buttercup 12 20 - - - 
Carolina (Geranium) - - 4 - 9 
Carpetweed - 6 12 - - 
Cheat2 6 20 - - - 
Chervil 20 - - - - 
Chickweed - 12 18 - - 
Cocklebur 12 18 24 - 36 
Copperleaf (Hophornbeam) - 2 4 - 6 
Copperleaf (Virginia) - 2 4 - 6 
Coreopsis (Plains) - 6 12 - 18 
Corn (Volunteer) 6 12 20 - - 
Corn speedwell 12 - - - - 
Crabgrass 3 6 12 - - 
Crowfootgrass - - 6 - 12 
Cutleaf evening primrose - - 3 - 6 
Devilsclaw (Unicorn plant) - 3 6 - - 
Dwarf dandelion 12 - - - - 
Eastern mannagrass 8 12 - - - 
Eclipta - 4 8 12 - 
Fall panicum 4 - 6 - 12 
Falsedandelion - 20 - - - 
Falseflax (Smallseed) 12 - - - - 
Fiddleneck - 6 12 - - 
Field pennycress 6 12 - - - 
Filaree - - 6 - 12 
Fleabane (Annual) 6 20 - - - 
Fleabane (Hairy) (Conyza bonariensis)* - - 6 - 10 
Fleabane (Rough) 3 6 12 - - 
Florida pusley - - 4 - 6 
Foxtail (Bristly, Giant, Yellow) 6 12 20 - - 
Foxtail (Carolina) 10 - - - - 
Foxtail (Green) 12 - - - - 
Goatgrass (Jointed) 6 12 - - - 
Goosegrass* - 3 6 - 12 
Grain sorghum (Milo) 6 12 20 - - 
Groundcherry - 3 6 - 9 
Groundsel (Common) - 6 10 - - 
Hemp (Sesbania) - 2 4 6 8 
Henbit - - 6 - 12 
Horseweed/Marestail (Conyza 
canadensis)* - 6 12 - 18 
Itchgrass 6 8 12 - 18 
Jimsonweed - - 12 - 18 
Johnsongrass (Seedling)* 6 12 18 - 24 
Junglerice* - 3 6 7 9 
Knotweed - - 6 - 12 
Kochia4* - 3 to 6 12 - - 
Lambsquarters - 6 12 - 20 
Little barley 6 12 - - - 
London rocket 6 - 24 - - 
Mayweed - 2 6 12 18 
Morningglory (Annual) (Ipomoea spp.) - - 3 - 6 
Mustard (Blue, Tansy, Tumble, Wild) 6 12 18 - - 
Nightshade (Black, Hairy) - 4 6 - 12

Page 17 of 143 
 
Oats 3 6 18 - - 
Pigweeds, Palmer* - 12 18 24 - 
Pigweed species* - 12 18 24 - 
Prickly lettuce - 6 12 - - 
Purslane - - 3 - 6 
Ragweed (Common, Giant)* - 6 12 - 18 
Red Rice - - 4 - - 
Rye (Volunteer/Cereal)2 6 18 18+ - - 
Ryegrass species* - - 6 - 12 
Sandbur (Field, Longspine) 6 12 - - - 
Shattercane 6 12 20 - - 
Shepherdspurse 6 12 - - - 
Sicklepod - 2 4 - 8 
Signalgrass (Broadleaf) - 3 6 7 9 
Smartweed (Lady's thumb) - - 6 - 9 
Smartweed (Pennsylvania) - - 6 - 9 
Sowthisle (Annual) - - 6 - 12 
Spanishneedles - - 6 - 12 
Speedwell (Purslane) 12 - - - - 
Sprangletop 6 12 20 - - 
Spurge (Prostrate, Spotted) - 6 12 - - 
Spurry (Umbrella) 6 - - - - 
Stinkweed - 12 - - - 
Sunflower 12 18 - - - 
Swinecress - 5 12 - - 
Teaweed/Prickly sida - 2 4 - 6 
Texas panicum 6 8 12 - 24 
Thistle (Russian)*,5 - 6 12 - - 
Velvetleaf - - 6 - 12 
Virginia (Pepperweed) - 18 - - - 
Waterhemp* - - 6 - 12 
Wheat2 6 12 18 - - 
Wheat (Overwintered) - 6 12 - 18 
Wild oats 3 6 18 - - 
Wild proso millet - 6 12 - 18 
Witchgrass - 12 - - - 
Wooly cupgrass - 6 12 - - 
Yellow rocket - 12 20 - - 
1 To control Downy brome in no-till systems, use 15 fl. oz. of this product per acre. 
2 Performance of this product is enhanced if application is made before this weed reaches the boot stage of growth. 
3 To control Wild buckwheat in the cotyledon to 2 leaf stage, use 15 fl. oz. of this product per acre. Use 2 0 fluid ounces of this 
product per acre to control 2 to 4 leaf Wild buckw heat. For enhanced control of Wild buckwheat over 2 inches in size, use 
sequential treatments of 20 fl. oz. followed by 20 fl. oz. of this product per acre. 
4 Do not apply this product when Kochia is in the button stage. 
5 Control of Russian thistle may vary based on environmental conditions and spray coverage. If possible, a tank-mixture with 2,4-
D as described below may improve control. 
*A glyphosate- resistant biotype has been confirmed. For additional information, refer to the "WEED RESISTANCE 
MANAGEMENT" section of this label. You may also visit the website, www.weedscience.org. 
 
Annual Weeds — Tank-Mixtures with 2,4-D, Dicamba or Picloram 
 
Enhanced control of certain hard-to -control weeds can be achieved by tank -mixing this product with Dicamba, 2,4-D, 
or Picloram. An appropriate rate of these other herbicides combined with the rate of this product specified in the 
“ANNUAL WEEDS RATE TABLE” will control the following weeds up to the maximum height or length as indicated 
below: 
 
Weeds (6 Inches Maximum Height or Length) Weeds (12 Inches Maximum Height or Length) 
Horseweed/Marestail (Conyza canadensis) 
Kochia* 
Morningglory 
Prickly lettuce 
Wild buckwheat** 
Cocklebur 
Lambsquarters 
Pigweeds 
Thistle, Russian*** 
 *Controlled with Dicamba tank-mixture only. 
 **Controlled with Picloram tank-mixture only. 
***Controlled with 2,4-D tank-mixture only.

Page 18 of 143 
 
At application rates given under “ANNUAL WEEDS” section, this product will control the following weeds up to a 
maximum height or length as indicated below. For enhanced control of these weeds, apply this product in a tank-mix 
with 2,4-D. 
 
Weeds (6 Inches Maximum Height or Length) 
Ragweed (Common) 
Ragweed (Giant) 
Smartweed (Pennsylvania) 
Velvetleaf 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
Annual Weeds — Handheld or Backpack Sprayers 
To control weeds listed in the "ANNUAL WEEDS RATE TABLE" of this label, apply a 0.3% solution of this product to 
weeds less than 6 inches in height or runner length. Apply prior to seed head formation in grass or bud formation in 
broadleaf weeds. To control annual weeds over 6 inches tall or unless otherwise specified, use a 0.6% solution. 
For enhanced results on harder-to-control perennials, including Bermudagrass, Canada thistle, Dock, Field bindweed, 
Hemp dogbane, and Milkweed, apply 1.3% solution of this product. 
When using application methods that result in less than complete coverage, apply 3.1% solution to control annual and 
perennial weeds and a 3.1 to 6.2% solution to control woody brush, trees and vines. 
 
Annual Weeds — Tank-Mixtures for Fallow and Reduced Tillage Systems 
For use only in Colorado, Kansas, Nebraska, Oklahoma, Oregon, South Dakota, and Washington. In Oregon and 
Washington, do not exceed 1 pound of Atrazine per acre. 
 
15 to 18 fluid ounces of this product plus Atrazine per acre will provide enhanced control the following weeds: 
 
Barnyardgrass* 
Downy brome 
Field sandbur 
Green foxtail 
Kochia** 
Lambsquarters 
Pigweed 
Prickly lettuce 
Stinkgrass 
Tansy mustard 
Russian thistle 
Volunteer Wheat 
Witchgrass 
 *Requires 18 fl. oz. of this product per acre for enhanced control of Barnyardgrass. 
**Add appropriate rate of Dicamba to the tank-mix for control of Kochia. 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
PERENNIAL WEEDS 
Apply this product to actively growing perennial weeds. New leaf development indicates active growth. Enhanced 
results can be obtained when soil moisture is adequate for active weed growth. 
 
If weeds have been recently mowed or tilled, do not apply this product until plants have resumed active growth and 
have reached the specified stage of growth or sufficient growth has been achieved to allow for good interception of the 
spray soluti on. For enhanced control, do not mow, cut, till, burn or disturb vegetation in the application area for a 
minimum of 7 days after application. 
 
For control of perennial weeds using a handheld controlled droplet applicator (CDA), apply a 14 to 28% solution of this 
product (18 to 36 fl. oz./gal. of applicator solution) at a flow rate of 2 fluid ounces per minute and a walking speed of 
0.75 mile per hour (2 to 3 qt./A). When using a vehicle-mounted CDA, apply the appropriate amount of this product as 
indicated in the following “PERENNIAL WEEDS RATE TABLE” in 2 to 15 gallons of water per acre. 
 
This product has no soil activity and does not control emergence of perennial weeds from seed and dormant 
underground roots, rhizomes or tubers present in the soil at the time of application. More than one application of this 
product might be necessary to control weeds regenerating from underground parts or seed, but must be made prior to 
crop emergence, except where in-crop application is allowed. 
 
Apply this product in the Fall before a killing frost. 
 
Unless otherwise directed, allow a minimum of 7 days after application before soil tillage.

Page 19 of 143 
 
PERENNIAL WEEDS RATE TABLE 
 
Perennial Weeds 
Broadcast Rate 
(Qt./A) 
Volume of Water 
(Gal./A) 
Handheld Sprayer 
Concentration 
(% Solution) 
Alfalfa 
 
1 to 1.25 3 to 10 1.3 
Apply after the last hay cutting in the Fall and when Alfalfa has regrown to a height 
of 6 to 8 inches or more. Follow applications with deep tillage after at least 7 days 
after treatment but before soil freeze up. 
Alligatorweed 
 
2.5 3 to 20 0.9 
For partial control, apply when most of the Alligatorweed are in bloom. Repeat 
applications will be required to achieve control. 
Anise (Fennel) 
 
- - 0.9 to 1.3 
Apply when most Anise have reached the early bud stage of growth. 
Bahiagrass 1.9 to 3.1 3 to 20 1.3 
Apply when most Bahiagrass have reached the early heading stage of growth. 
Bentgrass 0.9 10 to 20 1.3 
For suppression in grass seed production areas using ground application 
equipment only. Ensure entire crown area has resumed growth prior to Fall 
applications. Make sure that Bentgrass has at least 3 inches of growth before 
application. Avoid tillage prior to treatment. For enhanced results, till 7 to 10 days 
after application. 
Bermudagrass 1.9 to 3.1 3 to 20 1.3 
Apply 3.1 qt. of this product per acre for control. Treat when Bermudagrass is 
actively growing and seed heads are present. Retreatment may be necessary to 
achieve control. For partial control, apply 60 fl. oz./A. 
Bermudagrass, Water 
(Knotgrass) 
0.6 to 1 5 to 10 1.3 
Apply 30 fl. oz. of this product in 5 to 10 gallons of water per acre. Apply when 
Water bermudagrass is 12 to 18 inches in length. Allow at least 7 days after 
application before tilling, flushing or flooding the field. 
Fall applications only: Apply 20 fl. oz. of this product in 5 to 10 gallons of water per 
acre prior to frost and when Water bermudagrass is 12 to 18 inches in length. Till 
fallow fields prior to application. 
This product is not registered in California for use on Water bermudagrass. 
Bindweed (Field) 0.3 to 3.1 3 to 20 1.3

Page 20 of 143 
 
 
 
Do not apply field Bindweed is under drought stress as good soil moisture is 
necessary for active growth. For control, apply 2.5 to 3.1 qt. of this product per acre 
west of the Mississippi River and 1.9 to 2.5 qt. east of the Mississippi River. Apply 
when the weeds are at or beyond full bloom. For enhanced results, apply in late 
Summer or Fall before a killing frost. 
Also for control, apply 40 fl. oz. of this product plus appropriate rate of Dicamba in 
10 to 20 gallons of water per acre. Do not apply this tank-mixture by air. 
For suppression on irrigated agricultural land, apply 20 to 40 fl. oz. of this product 
plus appropriate rate of 2,4- D in 10 to 20 gal . of water per acre with ground 
equipment only. Apply following harvest or on fallow ground in the Fall when the 
Bindweed is actively growing and the majority of runners are 12 inches or more in 
length. Irrigate at least once to promote active Bindweed growth. 
For suppression, apply 10 fl. oz. of this product plus appropriate rate of 2,4-D in 3 
to 10 gal. of water per acre using ground application equipment or in 3 to 5 gal. of 
water per acre for aerial applications. Apply by air in fallow and reduced tillage 
systems only. Delay applications until maximum emergence has occurred and 
when vines are 6 to 18 inches in length. 
In California only: Apply 20 fl. oz. to 3.1 qt. of this product per acre. Actual rate 
needed for suppression or control will vary within this range depending on local 
conditions. For suppression on irrigated land where annual tillage is performed, 
apply 20 fl. oz. of this product in 3 to 10 gal. of water per acre. Apply to Bindweed 
that has reached a length of 12 inches or more. Allow maximum weed emergence 
and runner growth. Allow at least 3 days after application before tillage. 
Bluegrass (Kentucky) 0.6 to 1.25 3 to 40 1.3 
Apply 40 fl. oz. of this product in 10 to 40 gal. of water when weeds have reached 
boot to early seedhead stage of development. For partial control in pasture or hay 
crop renovation, apply 20 to 30 fl. oz. of this product in 3 to 10 gal. of water per 
acre. Apply to actively growing Bluegrass when most have reached 4 to 12 inches 
in height. 
Blueweed (Texas) 1.9 to 3.1 3 to 40 1.3 
Apply 2.5 to 3.1 qt. of this product per acre west of the Mississippi River or 1.9 to 
2.5 qt. per acre east of the Mississippi River. Apply when weeds are at or beyond 
full bloom. For enhanced results, apply in late Summer or Fall before a killing frost. 
Brackenfern 1.9 to 2.5 3 to 40 0.9 
Apply to fully expanded fronds that are at least 18 inches long. 
Bromegrass (Smooth) 0.6 to 1.25 3 to 40 1.3 
Apply 40 fl. oz. of this product in 10 to 40 gal. of water when weeds have reached 
boot to early seedhead stage of development. For partial control in pasture or hay 
crop renovation, apply 20 to 30 fl. oz. of this product in 3 to 10 gal . of water per 
acre. Apply to actively growing Bromegrass when most have reached 4 to 12 
inches in height. 
Bursage (Woolyleaf) - 3 to 20 1.3 
Apply 40 fl. oz. of this product per acre plus appropriate rate of Dicamba when 
plants are producing new active growth that has been initiated by moisture for at 
least 2 weeks and are at or beyond flowering. For partial control, apply 20 fl. oz. of 
this product per acre plus appropriate rate of Dicamba that will provide partial 
control. 
Canarygrass (Reed) 
 
1.25 to 1.9 3 to 40 1.3 
Apply when most of the Canarygrass have reached the early heading stage of 
growth. 
Cattail 1.9 to 3.1 3 to 40 1.3 
Apply when most Cattail have reached the early heading stage of growth. 
Clover (Red, White) 1.9 to 3.1 3 to 20 1.3 
Apply when most Clover have reached the early bud stage. For control, apply 10 
to 20 fl. oz. of this product plus appropriate rate of 2,4-D in 3 to 10 gallons of water 
per acre.

Page 21 of 143 
 
Cogongrass 1.9 to 3.1 10 to 40 1.3 
Apply when Cogongrass is at least 18 inches tall in late Summer or Fall. Due to 
uneven stages of growth and the dense nature of vegetation that could prevent 
good spray coverage, repeat treatments may be necessary to achieve control. 
Dallisgrass 
 
1.9 to 3.1 3 to 20 1.3 
Apply when most Dallisgrass have reached the early heading stage of growth. 
Dandelion 1.9 to 3.1 3 to 40 1.3 
Apply when most Dandelion have reached the early bud stage of growth. For 
control, apply 10 fl. oz. of this product plus appropriate rate of 2,4-D in 3 to 10 gal. 
of water per acre. 
Dock (Curly) 1.9 to 3.1 3 to 40 1.3 
Apply when most Dock have reached the early bud stage of growth. For control, 
apply 10 to 20 fl. oz. of this product plus appropriate rate of 2,4-D in 3 to 10 gal. 
of water per acre. 
Dogbane (Hemp) 2.5 3 to 40 1.3 
Apply when most Dogbane have reached the late bud to flower stage of growth. 
After crop harvest or mowing, allow weeds to regrow to a mature stage prior to 
treatment. For enhanced results, apply in late Summer or Fall. 
For suppression, apply 10 fl. oz. of this product plus appropriate rate of 2,4-D in 3 
to 10 gal. of water per acre for ground applications or 3 to 5 gal. of water per acre 
for aerial applications. Delay applications until maximum emergence of Dogbane 
has occurred. 
Fescue (Tall) 0.6 to 1.9 3 to 40 1.3 
Apply 60 fl. oz. of this product per acre when most Fescue have reached boot to 
early seedhead stage of growth. 
Fall applications only: Apply 20 fl. oz. of this product in 3 to 10 gal . of water per 
acre when plants have 6 to 12 inches of new growth. A sequential application of 
10 fl. oz. of this product per acre will improve long term control and will control 
seedlings germinating after Fall treatments or the following Spring. 
Fescue (except Tall) 1.9 to 3.1 3 to 20 1.3 
Apply when most Fescue have reached the early heading stage of growth. 
Guineagrass 1.25 to 1.9 3 to 40 0.9 
Apply when most Guineagrass have reached the 7 leaf stage of growth. Ensure 
thorough coverage when using handheld equipment. In Texas and ridge of Florida, 
use 40 fl. oz./A for control. In the Flatwoods region of Florida, 60 fl. oz./A is needed 
for control. 
Horsenettle 1.9 to 3.1 3 to 20 1.3 
Apply when most Horsenettle have reached the early bud stage of growth. 
Horseradish 2.5 3 to 40 1.3 
Apply when most Horseradish have reached the late bud to flower stage of growth. 
For enhanced results, apply in late Summer or Fall. 
Jerusalem artichoke 1.9 to 3.1 3 to 20 1.3 
Apply when most Jerusalem artichoke have reached the early bud stage. 
Johnsongrass 0.3 to 1.9 3 to 40 0.9

Page 22 of 143 
 
In annual cropping systems, apply 20 to 40 fl. oz. of this product in 3 to 10 gal. of 
water per acre. Use 40 fl. oz. of this product when applying in 10 to 40 gal. of water 
per acre. In noncrop or areas where annual tillage (no-till) is not practiced, apply 
40 to 60 fl. oz. of this product in 10 to 40 gal. of water per acre. 
For enhanced results, apply when most Johnsongrass have reached the boot to 
head stage of growth or in the Fall prior to frost. Allow at least 7 days after 
application before tillage. Do not tank -mix with residual herbicides when using 20 
fl. oz. of this product per acre. 
For burndown of Johnsongrass, apply 10 fl. oz. of this product in 3 to 10 gal. of 
water per acre before Johnsongrass have reached a height of 12 inches. Allow at 
least 3 days after treatment before tillage. 
For partial control or suppression, apply a 0. 6% solution of this product as spot 
treatment when Johnsongrass is 12 to 18 inches in height. Ensure uniform and 
complete coverage. 
Kikuyugrass 1.25 to 1.9 3 to 40 1.3 
Apply when most Kikuyugrass is at least 8 inches in height (3 or 4 leaf stage of 
growth). Allow at least 3 days after application before tillage. 
Knapweed 2.5 3 to 40 1.3 
Apply when most Knapweed have reached the late bud to flower stage of growth. 
For enhanced results, apply in late Summer or Fall. 
Lantana - - 0.9 
Apply at or beyond the bloom stage of growth. 
Lespedeza 1.9 to 3.1 3 to 20 1.3 
Apply when most Lespedeza have reached the early bud stage. 
Milkweed (Common) 1.9 3 to 40 1.3 
Apply when most Milkweed have reached the late bud to flower stage of growth. 
Muhyl (Wirestem) 0.6 to 1.25 3 to 40 1.3 
Use 20 fl. oz. of this product in 3 to 10 gal. of water per acre or 40 fl. oz. of this 
product when applying in 10 to 40 gal. of water per acre or when applying in 
pasture, sod or non-crop areas when Wirestem muhly is 8 inches or more in height. 
Do not till the soil between harvest and Fall applications or in the Fall or Spring 
prior to Spring applications. Allow at least 3 days after application before tillage. 
Mullein (Common) 1.9 to 3.1 3 to 20 1.3 
Apply when most Mullein are in the early bud stage. 
Napiergrass 1.9 to 3.1 3 to 20 1.3 
Apply when most Napiergrass are in the early heading stage of growth. 
Nightshade (Silverleaf) 1.25 3 to 10 1.3 
For enhanced results, apply when at least 60% of Nightshade has berries. Make 
Fall applications before a killing frost. 
Nutsedge (Purple, Yellow) 0.3 to 1.9 3 to 40 0.9 to 1.3 
Apply 60 fl. oz. of this product per acre to control Nutsedge plants and immature 
nutlets or apply a 0.9 to 1.3% solution when Nutsedge are in flower or when new 
nutlets can be found at rhizome tips. Nutlets that have not germinated will not be 
controlled and need repeat treatments after germination for long term control. 
Sequential applications: 20 to 40 fl. oz. of this product in 3 to 10 gal. of water per 
acre when majority of the Nutsedge plants are in the 3 to 5 leaf stage (less than 6 
inches tall) will also provide control. Repeat this application as necessary when 
newly emerging plants reach the 3 to 5 leaf stage. Subsequent applications will be 
necessary for long term control. 
For partial control of existing plants, apply 10 to 40 fl. oz. of this product in 3 to 40 
gal. of water per acre when plants have 3 to 5 leaves and most are less than 6 
inches tall. Repeat this application as needed to control subsequent emerging 
Nutsedge or regrowth of existing plants. 
Orchardgrass 0.6 to 1.25 3 to 40 1.3

Page 23 of 143 
 
Apply 40 fl. oz. of this product in 10 to 40 gal. of water per acre when most 
Orchardgrass have reached boot to early seed head stage of development. For 
partial control in pasture or hay crop renovation, apply 20 to 30 fl. oz. of this product 
in 3 to 10 gal. of water per acre. Apply to actively growing Orchardgrass when most 
have reached 4 to 12 inches in height. 
Orchardgrass sods going to no-till Corn: Apply 20 to 30 fl. oz. of this product in 
3 to 10 gal. of water per acre. Apply to Orchardgrass that is at least 12 inches tall 
for Spring applications and 6 inches tall for Fall applications. Allow at least 3 days 
after application before planting. A sequential application of Atrazine will be 
necessary for optimum results. 
Pampasgrass - - 0.9 to 1.3 
Apply when Pampasgrass is at or beyond the boot stage of growth. Thorough 
coverage is necessary for enhanced control. 
Paragrass 1.9 to 3.1 3 to 20 1.3 
Apply when most Paragrass are in the early heading stage of growth. 
Phragmites 1.9 to 3.1 10 to 40 0.9 to 1.3 
For partial control and for enhanced results, treat during late Summer or Fall when 
Phragmites are actively growing and in full bloom. Application before or after this 
stage may lead to reduced control. Due to the dense nature of the vegetation, 
which may prevent good spray coverage or uneven stages of growth, repeat 
treatments may be necessary to achieve control. Visual symptoms of control will 
be slow to develop. 
Poison hemlock - - 0.9 to 1.3 
Apply as a spray-to-wet treatment using a handheld sprayer. Optimum results are 
obtained when Poison hemlock are treated at the bud to full-bloom stage of growth. 
Pokeweed (Common) 1 3 to 40 1.3 
Apply to actively growing Pokeweed up to 24 inches tall. 
Quackgrass 0.6 to 1.9 3 to 40 1.3 
In annual cropping systems or in pastures and sod fields to be cultivated with deep 
tillage, apply 20 fl. oz. of this product in 3 to 10 gal . of water per acre or 40 fl. oz. 
in 10 to 40 gal . of water per acre when Quackgrass is 6 to 8 inches tall. Do not 
tank-mix with residual herbicides when using the 20 fl. oz. rate. Do not till between 
harvest and Fall applications or in Fall or Spring prior to Spring application. Allow 
at least 3 days after application before tillage. In pastures or sods, use a moldboard 
plow for enhanced results. 
In pastures, sods or non-crop areas where deep tillage will not follow application, 
apply 40 to 60 fl. oz. of this product in 10 to 40 gal. of water per acre when 
Quackgrass is more than 8 inches tall. 
Redvine 0.5 to 1.25 5 to 10 1.3 
For suppression, make two applications of 15 fl. oz. of this product per acre 7 to 14 
days apart or a single application of 40 fl. oz. in 5 to 10 gal. of water per acre. Apply 
in late September or early October to Redvine that are at least 18 inches tall and 
have been growing 45 to 60 days since the last tillage operation. Make applications 
at least 1 week before a killing frost. 
Reed (Giant) - - 1.3 
Enhanced results are obtained when applications are made in late Summer or Fall. 
Ryegrass (Perennial) 0.6 to 1.9 3 to 40 0.9 
In annual cropping systems, apply 20 to 40 fl. oz.. of this product in 3 to 10 gal. of 
water per acre or 40 fl. oz. of this product when applying in 10 to 40 gal. of water 
per acre. In non- crop sites or fields where annual tillage is not practiced (no till), 
apply 40 to 60 fl. oz. of this product in 10 to 40 gal. of water per acre. 
For enhanced results, apply when most Ryegrass have reached the boot to head 
stage of growth or in the Fall prior to frost. Do not tank-mix with residual herbicides 
when using 20 fl. oz. of this product per acre. 
Smartweed (Swamp) 1.9 to 3.1 3 to 40 1.3 
Apply when most Smartweed have reached the early bud stage of growth. For 
control, apply 10 fl. oz. of this product plus appropriate rate of 2,4-D in 3 to 10 gal. 
of water per acre in the late Summer or Fall. 
Sowthistle (Perennial) 1.25 to 1.9 3 to 40 1.3

Page 24 of 143 
 
Apply when most Sowthistle are at or beyond the bud stage of growth. After 
harvest, mowing or tillage in the late Summer or F all, allow at least 4 weeks for 
initiation of active growth and rosette development prior to the application of this 
product. Make Fall applications before a killing frost. Allow at least 3 days after 
application before tillage. 
Spurge (Leafy) - - 1.3 
For suppression, apply 10 fl. oz. of this product plus appropriate rate of 2,4-D in 3 
to 10 gal . of water per acre in the late Summer or Fall. If mowing has occurred, 
delay application until most of the target weeds are 12 inches tall. 
Starthistle (Yellow) 1.25 10 to 40 1.3 
Enhanced results are obtained when applications are made during rosette, 
bolting and early flower stages. 
Sweet potato (Wild) - - 1.3 
For partial control, apply to Wild sweet potato at or beyond the bloom stage of 
growth. Repeat applications may be required. 
Thistle (Artichoke) - - 1.3 
For partial control, apply to Thistle at or beyond the bloom stage of growth. Repeat 
applications may be required. 
Thistle (Canada) 1.25 to 1.9 3 to 40 1.3 
Apply when most Canada thistles are at or beyond the bud stage of growth. After 
harvest, mowing or tillage in the late Summer or Fall, allow at least 4 weeks for 
initiation of active growth and rosette development prior to the application of this 
product. Make Fall applications before a killing frost. 
For suppression in the Spring, apply 20 fl. oz. of this product alone or 10 fl. oz. of 
this product plus appropriate rate of 2,4-D in 3 to 10 gal. of water per acre when 
rosette is at least 6 inches in diameter. Applications can be made as long as leaves 
are still green and plants are actively growing. 
Allow at least 3 days after application before tillage. 
Timothy 1.25 to 1.9 3 to 40 1.3 
Apply when most Timothy are in the early heading stage of growth. 
Torpedograss 2.5 to 3.1 3 to 40 1.3 
For partial control, apply when most Torpedograss are at or beyond the seed head 
stage of growth. Repeat applications will be needed to achieve control. Make Fall 
applications before the frost. 
Trumpetcreeper 1.25 5 to 10 1.3 
For partial control, apply in late September or October when Trumpetcreeper are 
at least 18 inches tall and have been growing 45 to 60 days since the last tillage 
operation. Apply at least 1 week before a killing frost. 
Vaseygrass 1.9 to 3.1 3 to 20 1.3 
Apply when most Vaseygrass are in the early heading stage of growth. 
Velvetgrass 1.9 to 3.1 3 to 20 1.3 
Apply when most Velvetgrass are in the early heading stage of growth. 
Wheatgrass (Western) 1.25 to 1.9 3 to 40 1.3 
Apply when most Wheatgrass are in the early heading stage of growth. 
NOTE: DO NOT USE VIA BROADCAST APPLICATION FOR WEEDS WITH BLANKS. 
 
WOODY BRUSH, TREES AND VINES 
Apply this product during full leaf expansion, unless otherwise directed. Use the higher application rate or spray solution 
concentration within the specified range for larger plants or dense vegetative growth. On vines, use the higher 
application rate or spray solution concentration for plants that have reached the woody stage of growth. Enhanced 
results are obtained when application is made in late Summer or Fall after fruit formation. 
 
In arid areas, enhanced results are obtained when applications ar e made in the Spring to early Summer when brush 
species are at high moisture content and are flowering. 
 
Unless otherwise directed, make broadcast applications in 3 to 40 gallons of water per acre. Ensure thorough coverage 
when using handheld sprayers. Herbicidal symptoms might not appear prior to frost or senescence following application 
in the Fall. 
 
Allow at least 7 days after application before tillage, mowing or removal of vegetation in the application area. Repeat 
treatments may be necessary to control plants regenerating from underground parts or seed. Some autumn colors on

Page 25 of 143 
 
undesirable deciduous species are acceptable when applying this product provided no major leaf drop has occurred. 
Reduced performance may result if Fall treatments are made following a frost. 
 
WOODY BRUSH, TREES AND VINES RATE TABLE 
 
Woody Brush, Tree & 
Vine Species 
Broadcast Rate 
(Qt./A) 
Handheld Sprayer 
Concentration 
(% Solution) 
Alder 1.9 to 2.5 0.9 
Ash* 1.25 to 3.1 0.9 to 1.3 
Aspen (Quaking) 1.25 to 1.9 0.9 
Bearmat (Bearclover)* 1.25 to 3.1 0.9 to 1.3 
Beech* 1.25 to 3.1 0.9 to 1.3 
Birch 1.25 to 1.9 0.9 
Blackberry 1.9 to 2.5 0.9 
Apply after target plants have reached full leaf maturity. For enhanced results, apply in 
late Summer or Fall. Apply a 0. 6% solution of this product after berries have set or 
dropped in late Fall. After leaf drop and until a killing frost or as long as stems are green, 
apply 1.9 to 2.5 qt. of this product in 10 to 40 gal. of water per acre. 
Blackgum 1.25 to 3.1 0.9 to 1.3 
Bracken 1.25 to 3.1 0.9 to 1.3 
Broom (French, Scotch) - 0.9 to 1.3 
Buckwheat (California)* - 0.9 to 1.3 
Thorough coverage of foliage is necessary for enhanced results. 
Cascara* 1.25 to 3.1 0.9 to 1.3 
Catsclaw* - 0.9 
Ceanothus* 1.25 to 3.1 0.9 to 1.3 
Chamise - 0.9 
Thorough coverage of foliage is necessary for enhanced results. 
Cherry (Bitter, Black, Pin) 1.25 to 1.9 0.9 
Coyote brush - 0.9 to 1.3 
Apply when at least 50% of the new leaves are developed. 
Dogwood* 1.25 to 3.1 0.9 to 1.3 
Elderberry 1.25 to 1.9 0.9 
Elm* 1.25 to 3.1 0.9 to 1.3 
Eucalyptus - 1.3 
For control of Eucalyptus resprouts, apply when resprouts are 6 to 12 feet tall. Ensure 
complete coverage. Application to drought-stressed Eucalyptus plants will result in less 
than optimum results. 
Florida holly (Brazilian 
peppertree)* 
1.25 to 3.1 0.9 to 1.3 
Gorse* 1.25 to 3.1 0.9 to 1.3 
Hasardia* - 0.9 to 1.3 
Thorough coverage of foliage is necessary for enhanced results. 
Hawthorn 1.25 to 1.9 0.9 
Hazel 1.25 to 1.9 0.9 
Hickory* 1.25 to 3.1 0.9 to 1.3 
Honeysuckle 1.9 to 2.5 0.9 
Hornbeam (American)* 1.25 to 3.1 0.9 to 1.3 
Kudzu 2.5 to 3.1 1.3 
Repeat applications may be needed to achieve control. 
Locust (Black)* 1.25 to 2.5 0.9 to 1.3 
Madrone (Resprouts)* - 1.3 
Apply to resprouts that are 3 to 6 feet tall. Enhanced results are obtained with Spring 
or early Summer treatments.

Page 26 of 143 
 
Manzanita* 1.25 to 3.1 0.9 to 1.3 
Maple (red) 1.25 to 2.5 0.9 
Apply 0.9% solution when at least 50% of the new leaves are fully developed. For 
partial control, apply 40 to 80 fl. oz. of this product per acre. 
Maple (Sugar) - 0.9 
Apply when at least 50% of the new leaves are fully developed. 
Monkey flower* - 0.9 to 1.3 
Thorough coverage of foliage is necessary for enhanced results. 
Oak (Black, White)* 1.25 to 2.5 0.9 to 1.3 
Oak (Northern) - 0.9 
Apply when at least 50% of the new pin leaves are fully developed. 
Oak (Post) 1.9 to 2.5 0.9 
Oak (Southern, Red) 1.25 to 1.9 0.9 
Persimmon* 1.25 to 3.1 0.9 to 1.3 
Pine 1.25 to 3.1 0.9 to 1.3 
Poison ivy/Poison oak 2.5 to 3.1 1.3 
Repeat applications may be needed to achieve control. Make Fall applications before 
leaves lose green color. 
Poplar (Yellow)* 1.25 to 3.1 0.9 to 1.3 
Redbud (Eastern) 1.25 to 3.1 0.9 to 1.3 
Rose (Multiflora) 1.25 0.9 
Apply prior to leaf deterioration caused by leaf eating insects. 
Russian olive* 1.25 to 3.1 0.9 to 1.3 
Sage (Black) - 0.9 
Thorough coverage is necessary for enhanced results. 
Sage (White)* 1.25 to 3.1 0.9 to 1.3 
Sage brush (California) - 0.9 
Thorough coverage is necessary for enhanced results. 
Salmonberry 1.25 to 1.9 0.9 
Saltcedar 1.25 to 3.1 0.9 to 1.3 
Sassafras* 1.25 to 3.1 0.9 to 1.3 
Sourwood* 1.25 to 3.1 0.9 to 1.3 
Sumac (Poison, Smooth, 
Winged)* 
1.25 to 2.5 0.9 to 1.3 
Sweetgum 1.25 to 1.9 0.9 
Swordfern* 1.25 to 3.1 0.9 to 1.3 
Tallowtree (Chinese) - 0.9 
Thorough coverage is necessary for enhanced results. 
Tan oak (Resprouts)* - 1.3 
Apply to resprouts that are less than 6 feet tall. Enhanced results are obtained 
following application in the Fall. 
Thimbleberry 1.25 to 1.9 0.9 
Tobacco (Tree)* - 0.9 to 1.3 
Trumpetcreeper 1.25 to 1.9 0.9 
Vine maple* 1.25 to 3.1 0.9 to 1.3 
Virginia creeper 1.25 to 3.1 0.9 to 1.3 
Waxmyrtle (Southern)* 1.25 to 3.1 0.9 to 1.3 
Willow 1.9 to 2.5 0.9 
*Partial control

Page 27 of 143 
 
ANNUAL AND PERENNIAL CROPS 
NOTE: THIS SECTION GIVES DIRECTIONS FOR USE THAT APPLY TO ALL LISTED CROPS THAT FOLLOW. 
SEE THE INDIVIDUAL CROP CATEGORIES FOR SPECIFIC INSTRUCTIONS, PRE-HARVEST INTERVALS (PHI) 
AND ADDITIONAL PRECAUTIONS AND RESTRICTIONS. 
 
For applications to Glyphosate resistant and Glyphosate Tolerant crops, refer to the GLYPHOSATE RESISTANT AND 
GLYPHOSATE TOLERANT CROPS" section of this label or separately published supplemental labeling for this product 
for use directions. 
 
TYPES OF APPLICATIONS: Chemical Fallow, Pre-plant Fallow Beds, Pre-plant, At-Planting, Pre-emergence, Hooded 
Sprayers in Row-Middles, Shielded Sprayers in Row Middles, Wiper Applications in Row-Middles, and Post-Harvest. 
 
USE INSTRUCTIONS: This product may be applied during fallow intervals preceding planting, prior to planting or 
transplanting, at-planting or pre-emergence to annual and perennial crops listed on this label, except where specifically 
limited. For any crop not listed in this label, make applications at least 30 days prior to planting. Unless otherwise 
specified, weed control applications may be made according to the rates listed in the "WEEDS CONTROLLED” section. 
 
Application of this product may be repeated as needed up to a maximum of 160 fluid ounces (5 qt.) per acre per year. 
Refer to specific use sections of this label for additional information on minimum intervals required before re-application 
of this product. 
 
Hooded sprayers and wiper applicators capable of preventing all contact of the herbicide solution with the crop may be 
used in mulched or unmulched row middles after crop establishment. Wiper applicators may be used over-the-top of 
crops to control tall weeds only when specif ically directed in the individual crop sections that follow. Crop injury is 
possible with these methods of application. Refer to the “APPLICATION EQUIPMENT AND TECHNIQUES” section of 
this label for information regarding the potential for crop injury using selective application equipment. 
 
Spot treatment application of this product for weed control in a cropping system may be made only when specifically 
directed in the individual crop sections that follow. 
 
Unless otherwise prohibited, all applications of this product described in the sections that follow may be made using 
aerial application equipment where appropriate, provided that the applicator complies with the precautions and 
restrictions specified on this label and on all supplemental labeling published for this product. Refer to the 
“APPLICATION EQUIPMENT AND TECHNIQUES” section of this label for information on aerial application and 
procedures for avoiding spray drift that could cause injury to any vegetation not intended for application. Use of 
appropriate buffers will help prevent injury to adjacent vegetation. 
 
TANK-MIXTURES: This product may be tank -mixed with other herbicides to provide residual weed control, broader 
weed control spectrum or an alternate mode of action. Some tank-mix products have the potential to cause crop injury. 
Read the label of all products in the tank-mixture prior to use to determine the potential for crop injury. It is the pesticide 
user’s responsibility to ensure that all products are registered f or the intended use. Read and follow the applicable 
restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users must follow the 
most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
Mixing other products with this herbicide in the spray tank can cause incompatibility antagonism or a reduction in the 
efficacy of this product. If compatibility is not known, predetermine the compatibility of tank-mix products together in the 
carrier by mixing small proportional quantities in advance. Manufacturer has not tested all product formulations for 
compatibility or performance in a tank-mix. Buyer and all users are responsible for any and all loss or damage in 
connection with the use or handling of mixtures of this product with herbicides or other materials that are not specifically 
identified on this label or on separate supplemental labeling or Fact Sheets for this product. See the “TANK-MIXING” 
section of this label for more information on tank-mixtures. 
 
USE PRECAUTIONS: Avoid contact of this herbicide with foliage, green shoots or stems, bark, exposed roots 
(including those emerging from plastic mulch) or fruit of crops, as severe crop injury or destruction could result. 
Transplant seedlings that come in contact with weeds that are still wet with a spray solution of this product could result 
in significant crop injury. When making pre-emergence applications, make applications before crop emergence to avoid 
severe crop injury. Broadcast application of this product at emergence will result in injury or death of emerged seedlings. 
Apply before seed germination in coarse sandy soils to further minimize the risk of crop injury. In crops where spot 
treatment is allowed, the crop sprayed with this product will be killed along with the weeds. Take care not to spray or 
allow spray to drift outside the target area to avoid unwanted crop destruction. See the “APPLICATION EQUIPMENT 
AND TECHNIQUES” section of this label for additional information. 
 
Pre-harvest application on crops grown for seed could result in a reduction in germination or vigor. 
 
USE RESTRICTIONS: Observe the maximum application rates stated throughout this label. Maximum application rates 
apply to the use of this product combined wit h the use of any and all other herbicides containing glyphosate as the

Page 28 of 143 
 
active ingredient, whether applied separately or as mixtures. Calculate the application rates (glyphosate acid 
equivalent) and ensure that the total use of this and other glyphosate containing products does not exceed the stated 
maximum rate. See the “PRODUCT INFORMATION” section of this label for more information on maximum application 
rates. 
 
Unless otherwise directed on this label, application using selective equipment, including wiper applicators and hooded 
sprayers, must be made at least 14 days prior to harvest. In crops where spot treatment is allowed, do not apply this 
product to more than 10 % of the total field to be harvested, unless otherwise directed. Post -harvest and fallow 
applications must be made at least 30 days prior to the planting of any crop not listed on this label. 
 
Pre-Harvest Interval (PHI): Do not harvest or feed vegetation from an area for 8 weeks following broadcast post -
emergence application, unless otherwise directed. 
 
When applying this product as a tank-mixture with one or more products, refer to each individual tank-mix product label. 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read a nd follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
CEREAL AND GRAIN CROPS 
[Barley, Buckwheat, Millet (Pearl, Proso), Oats, Quinoa, Rice, Rye, Teff, Teosinte, Triticale, 
Wheat (All types), Wild Rice] 
 
TYPES OF APPLICATIONS: Those listed above in "ANNUAL AND PERENNIAL CROPS" plus the following: Red Rice 
Control Prior to Planting Rice, Spot Treatment (except Rice), Control of Barnyardgrass in Rice Using Renovation 
Treatment (CA only), Wiper Applications (Feed Barley and Wheat Only), Pre-harvest (Feed Barley and Wheat Only). 
 
Pre-plant, At-planting Applications, Pre-emergence 
This product may be applied before, during or after planting of cereal crops prior to emergence of the crop. 
 
Control of Red Rice Prior to Planting Rice 
Flush fields prior to application to obtain uniform germination and stand of Red rice. Apply 30 fluid ounces of this product 
in 5 to 10 gallons of water per acre when majority of the Red rice plants are in the 2 leaf stage and no more than 4 
inches tall. Red rice plants with less than 2 true leaves may be only partially controlled. 
 
USE PRECAUTIONS: Avoid spraying during low humidity conditions, as reduced control may result. 
 
USE RESTRICTIONS: Do not flood treated fields for 8 days following application. Do not treat Rice fields or levees 
when fields contain floodwater. 
 
Spot Treatment (Except Rice) 
This product may be applied as a spot treatment in cereal crops. Apply this product before heading in small grains. 
 
USE RESTRICTIONS: Do not treat more than 10% of the total field area to be harvested. 
 
Control of Barnyardgrass in Rice Using Renovation Treatment (CA Only) 
In California, this product may be applied as a renovation treatment in Rice crops to control Barnyardgrass (Echinochloa 
crus-galli) infestations using ground broadcast application equipment or a handheld sprayer. Renovation is defined as 
a herbicide application that will result in crop and weed destruction in an entire field or contiguous area within a field. 
 
USE RESTRICTIONS: Rice straw and stubble from the application area plus an additional 25 foot buffer zone on all 
sides may not be used for animal bedding, grazing or any other feed purposes. Do not apply using aerial application 
equipment. 
 
Wiper Applications (Feed Barley and Wheat Only) 
Over-the top wiper applications may be made on feed Barley and Wheat to control tall weeds. To control Common rye 
or Cereal rye, apply after the weeds have headed and achieved maximum growth . See additional instructions on the 
use of wiper applicators in “SELECTIVE EQUIPMENT” under “APPLICATION EQUIPM ENT AND TECHNIQUES” 
section of this label. 
 
USE RESTRICTIONS: Pre-Harvest Interval (PHI): Allow at least 35 days between application and harvest. Do not use 
roller applicators.

Page 29 of 143 
 
Pre-harvest (Feed Barley and Wheat Only) 
This product provides weed control when applied prior to harvest of Feed barley or Wheat. For Feed barley, apply after 
the hard-dough stage and when the grain contains 20% moisture or less. For Wheat, apply after the hard-dough stage 
of grain (30% or less grain moisture). Stubble may be grazed immediately after harvest. 
 
This product may be applied using either aerial or ground spray equipment. For ground applications, apply this product 
in 10 to 20 gallons of water per acre. For aerial applications, apply this product in 3 to 10 gallons of water per acre. 
 
USE RESTRICTIONS: Do not apply more than 20 fluid ounces of this product per acre. Pre-Harvest Interval (PHI): 
Allow 7 days between application and harvest or grazing. 
 
Post-harvest Applications 
This product may be applied to control weeds after harvest of cereal crops. Higher rates may be required for 
control of large weeds which were growing in the crop at the time of harvest. Tank-mixtures with 2,4-D or Dicamba 
may be used. 
 
USE RESTRICTIONS: For any crop not listed on this label, applications must be made at least 30 days prior to 
planting the next crop. Pre-Harvest Interval (PHI): Allow a minimum of 7 days between treatment and harvest or 
feeding of treated vegetation. 
 
Nonselective Control of Annual Weeds in Small Grain Cropping Systems (South Dakota Only) 
Refer to the "WEEDS CONTROLLED" section of this label for rates and weeds controlled. Apply in 3 to 5 gallons of 
water per acre by ground and 2 to 3 gallons of water per acre for aerial applications. 
 
AVOID DRIFT. EXTREME CARE MUST BE USED WHEN APPLYING THIS PRODUCT TO PREVENT INJURY TO 
DESIRABLE PLANTS AND CROPS. 
 
Do not allow the herbicide solution to mist, drip, drift, or splash onto desirable vegetation since minute quantities 
of this herbicide can cause severe damage or destruction to the crop, plants or other areas on which treatment 
was not intended. The likelihood of injury occurring from the use of this product is greatest when winds are gusty 
or in excess of 5 mph or when other conditions, including lesser wind velocities, will allow spray drift to occur. 
When spraying, avoid combinations of pressure and nozzle type that will result in splatter or fine particles (mist) 
that are likely to drift. AVOID APPLY ING AT EXCESSIVE SPEED OR PRESSURE. Note: To prevent injury to 
adjacent desirable vegetation, appropriate buffer zones must be maintained. 
 
Adjust boom height on ground equipment to prevent streaked, overlapped or uneven applications. Coarse sprays 
are less likely to drift; therefore, do not use nozzles or nozzle configurations that dispense spray as fine spray 
droplets. In aerial applications, do not angle nozzles forward into the airstream and do not increase spray volume 
by increasing nozzle pressure. Ensure uniform application. Use appropriate marking devices when applying 
herbicides by air. Avoid spraying when weeds are subject to moisture stress, when dust is on foliage, or when 
straw canopy covers the weeds. 
 
Thoroughly wash aircraft, especially landi ng gear, after each day of spraying to remove residue of this product 
accumulated during spraying or from spills. PROLONGED EXPOSURE OF THIS PRODUCT TO UNCOATED 
STEEL SURFACES MAY RESULT IN CORROSION AND POSSIBLE FAILURE OF PART. LANDING GEAR IS 
MOST SUSCEPTIBLE. The maintenance of an organic coating (paint) which meets aerospace specification MIL-
C-38413 may prevent corrosion. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
CORN 
[Field, Pop, Seed, Silage, Sweet] 
 
TYPES OF APPLICATIONS: Those listed in "ANNUAL AND PERENNIAL CROPS" plus the following: Pre-harvest, 
Spot Treatment.

Page 30 of 143 
 
For Glyphosate resistant and Glyphosate tolerant Corn, see the "GLYPHOSATE RESISTANT AND 
GLYPHOSATE TOLERANT CROPS" section of this label. 
 
Pre-plant, At-planting Applications, Pre-emergence 
This product may be applied alone or in a tank-mixture before, during or after planting Corn but prior to emergence of 
the crop. 
 
Tank-Mixtures 
This product can be tank-mixed with other herbicides (examples are listed below). Apply these tank-mixtures in 10 to 
20 gallons of water or 10 to 60 gallons of nitrogen solution per acre. 
 
Atrazine 
Acetochlor 
Bicyclopyrone 
Bromoxynil 
Carfentrazone-ethyl 
Clopyralid 
2,4-D 
Dicamba 
Diflufenzopyr 
Dimethenamid 
Dimethenamid-P 
Flufenacet 
Flumetsulam 
Flumiclorac pentyl ester 
Fluthiacet-methyl 
Glufosinate 
Imazethapyr 
Isoxaflutole 
Linuron 
Mesotrione 
Metolachlor 
Metribuzin 
Nicosulfuron 
Pendimethalin 
Prosulfuron 
Pyroxasulfone 
Rimsulfuron 
S-Metolachlor 
Saflufenacil 
Simazine 
Thifensulfuron 
Topramezone 
Tembotrione 
Thiencarbazone-methyl 
Thiencarbazone 
 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
For difficult-to-control annual weeds including Barnyardgrass, Crabgrass, Fall panicum, Shattercane and broadleaf 
Signalgrass up to 2 inches tall, and Pennsylvania smartweed up to 6 inches tall, apply this product at 2 0 fluid ounces 
of this product per acre in these tank-mixtures. For other listed annual weeds, apply 15 to 20 fluid ounces of this product 
per acre when weeds are less than 6 inches tall, and 20 to 30 fluid ounces when weeds are over 6 inches tall. 
 
When using nitrogen solutions as the carrier, higher application rates might be needed for acceptable weed control. 
 
USE RESTRICTIONS: Applications of 2,4-D or Dicamba must be made at least 7 days prior to planting Corn. 
 
In Southern states, do not mix this product in nitrogen solutions for application to hard-to -control grasses including 
Barnyardgrass, Fall panicum, annual Ryegrass, broadleaf Signalgrass, and any perennial weeds. The area includes 
Illinois and Indiana south of Route 50 and the following states: Alabama, Arkansas, Delaware, Florida, Georgia, 
Kentucky, Louisiana, Maryland, Mississippi, New Jersey, North Carolina, Oklahoma, South Carolina, Tennessee, 
Texas, Virginia, and West Virginia. 
 
Hooded Sprayers 
This product may be applied through hooded sprayers for weed control between the rows of Corn. Only hooded 
sprayers that completely enclose the spray pattern may be used. See additional instruction for the use of hooded 
sprayers in the "APPLICATION EQUIPMENT AND TECHNIQUES" section of this label. 
 
USE RESTRICTIONS: Corn must be at least 12 inches tall, measured without extending leaves. Do not apply more 
than 20 fluid ounces of this product per acre for each hooded sprayer application and no more than 60 fluid ounces per 
acre per year total. 
 
Spot Treatment 
For spot treatments, apply this product prior to silking of Corn. 
 
USE RESTRICTIONS: Do not treat more than 10% of the total field area to be harvested. 
 
Pre-harvest Applications 
Up to 60 fluid ounces of this product per acre may be applied using ground application equipment or up to 40 fluid 
ounces per acre using aerial application equipment when kernel -fill is complete and Corn is physiologically mature 
(black layer formed) and grain moisture is 35% or less. 
 
USE RESTRICTIONS: Pre-Harvest Interval (PHI): Allow at least 7 days between application and harvest. 
 
Post-harvest Applications 
This product may be applied after harvest of Corn. Higher rates may be used to control large weeds growing in the field 
at the time of harvest. Tank -mixtures with 2,4-D or Dicamba may be used. It is the pesticide user’s responsibility to 
ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations

Page 31 of 143 
 
and directions for use on all product labels involved in tank-mixing. Users must follow the most restrictive directions for 
use and precautionary statements of each product in the tank-mixture. 
 
 
USE RESTRICTIONS: Pre-Harvest Interval (PHI): Allow a minimum of 7 days between treatment and harvest or feeding 
of vegetation within the treated area. Application of this product must be made at least 30 days prior to planting of any 
crop not listed on this label. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 400 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs. AE/Ac) 
 
COTTON 
TYPES OF APPLICATIONS: Those listed in "ANNUAL AND PERENNIAL CROPS" plus the following: Selective 
Equipment, Spot Treatment, Pre-harvest. 
 
For Glyphosate resistant and Glyphosate tolerant Cotton, see the "GLYPHOSATE RESISTANT AND GLYPHOSATE 
TOLERANT CROPS " section of this label. 
 
Pre-plant, At-planting Applications, Pre-emergence 
This product may be applied before, during or after planting Cotton but prior to crop emergence. 
 
TANK-MIXTURES: This product can be tank-mixed 2,4-D or Dicamba and applied prior to planting only. This product 
may also be tank-mixed with other herbicides (examples are listed below) and applied prior to crop emergence. Apply 
these tank-mixtures in 10 to 20 gallons of water per acre. 
 
Acetochlor 
Clomazone 
Diuron 
Flumioxazin 
Fluometuron 
Fomesafen 
Metolachlor 
Norflurazon 
Pendimethalin 
Prometryn 
Pyrithiobac 
S-Metolachlor 
Saflufenacil 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
Hooded Sprayer, Selective Equipment 
This product may be applied using hooded sprayers, shielded applicators or over-the top of Cotton using wiper 
applicators to control tall weeds. See the "SELECTIVE EQUIPMENT" section under “APPLICATION EQUIPMENT AND 
TECHNIQUES” of this label for additional information on proper use of these types of equipment. 
 
USE RESTRICTIONS: Allow at least 7 days between application and harvest. 
 
Spot Treatment 
For spot treatments, apply this product prior to boll opening of Cotton. 
 
USE RESTRICTIONS: Do not treat more than 10% of the total field area to be harvested. 
 
Pre-harvest Applications 
This product provides weed control and Cotton regrowth inhibition when applied prior to harvest of Cotton. For weed 
control, apply at the rates given in the "ANNUAL WEEDS" and "PERENNIAL WEEDS" found under the “WEEDS 
CONTROLLED” section of this label. 
 
For Cotton regrowth inhibition, apply 15 to 40 fluid ounces of this product per acre. Apply only after sufficient bolls have 
developed to produce the desired yield of Cotton. Applications made prior to this time could affect maximum yield 
potential. 
 
TANK-MIXTURES: This product may be tank-mixed with Tribufos, Thidiazuron + Diuron or Ethephon to enhance Cotton 
leaf drop. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read 
and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank-mixing.

Page 32 of 143 
 
Users must follow the most restrictive directions for use and precautionary statements of each product in the tank -
mixture. 
 
USE RESTRICTIONS: Pre-Harvest Interval (PHI): Allow a minimum of 7 days between application and harvest of 
Cotton. DO NOT add additional surfactant or additives containing surfactant to this product for pre-harvest application 
to Cotton. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 Fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
FALLOW AND REDUCED TILLAGE SYSTEMS 
Fallow Systems 
This product may be applied during the fallow period prior to planting or emergence of any crop listed on this label. 
Apply at least 30 days prior to planting of any crop not listed on this label. 
 
TYPES OF APPLICATIONS: Chemical Fallow, Pre-plant Fallow Beds, Aid-to-Tillage. 
 
Chemical Fallow: 
This product may be used as a substitute for tillage to control annual weeds in fallow fields. Broadcast or spot treatments 
will also control or suppress many perennial weeds in fallow fields. Tank -mix this product with 2 ,4-D or Dicamba for 
broader weed control spectrum. Aerial application of up to 4 0 fluid ounces of this product per acre may be made onto 
fallow fields where there is sufficient buffer to prevent injury due to drift onto adjacent crops. 
 
USE PRECAUTIONS: Some crop injury may occur if Dicamba is applied within 45 days of planting. 
 
Pre-plant Applications on Fallow Beds: 
This product will control weeds listed in the "WEEDS CONTROLLED” section prior to planting. 
 
TANK-MIXTURES: 8 fluid ounces of this product plus appropriate rate of Oxyfluorfen per acre will control the following 
weeds: 
 
Weeds (3 Inches Maximum Height or Length) Weeds (6 Inches Maximum Height or Length) 
Cheeseweed (common) 
Chickweed 
Groundsel 
London rocket 
Shepherdspurse 
 
10 fluid ounces of this product plus appropriate rate of Oxyfluorfen per acre will control the following weeds: 
 
Weeds (6 Inches Maximum Height or Length) Weeds (12 Inches Maximum Height or Length) 
Cheeseweed (common) 
Groundsel 
Horseweed/Marestail (Conyza canadensis) 
Chickweed 
London rocket 
Shepherdspurse 
 
It is the pesticide user’s responsibility to ensure that tank-mix product is registered for the intended use. Read and 
follow the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. 
Users must follo w the most restrictive directions for use and precautionary statements of each product in the tank -
mixture. 
 
Aid-To-Tillage 
This product may be used in conjunction with tillage practices in fallow systems or pr ior to planting of crops listed on 
this label (pre-plant) to control Cheat, Downy brome, Foxtail, Tansy mustard, and Volunteer Wheat. Apply 8 fluid ounces 
of this product in 3 to 10 gallons of water per acre before weeds are 6 inches in height. Application must be followed 
by conventional tillage practices no later than 15 days after treatment and before regrowth occurs. Allow at least 1 day 
after application before tillage. 
 
USE PRECAUTIONS: Tank-mixtures with residual herbicides may result in reduced performance.

Page 33 of 143 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 Fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
GRAIN SORGHUM (MILO) 
TYPES OF APPLICATIONS: Those listed in "ANNUAL AND PERENNIAL CROPS" plus the following: Spot Treatment, 
Wiper Applications, Pre-harvest. 
 
Pre-plant, At-planting Applications, Pre-emergence 
This product may be applied alone or in tank-mixture before, during or after planting Grain sorghum prior to emergence 
of the crop. 
 
Tank-Mixtures 
Apply these tank-mixtures in 10 to 20 gallons of water or 10 to 60 gallons of nitrogen solution per acre. Ensure that the 
product used is labeled for application prior to planting or emergence of Grain Sorghum. 
 
Acetochlor 
Atrazine 
Metolachlor 
S-Metolachlor 
Saflufenacil 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
For hard-to-control annual weeds including Barnyardgrass, Broadleaf signalgrass, Crabgrass, Fall panicum, and 
Shattercane up to 2 inches tall, and Pennsylvania smartweed up to 6 inches tall, apply at 20 fluid ounces of this product 
per acre in a tank-mixture with one or more of the listed products above. 
 
For control of other annual weeds listed on this label, apply 15 to 20 fluid ounces of this product per acre when weeds 
are less than 6 inches tall and 20 to 30 fluid ounces per acre when weeds are over 6 inches tall. When using a nitrogen 
solution as the carrier, application rate might need to be increased to achieve adequate weed control. 
 
Spot Treatment, Wiper Applications 
This product may be applied as a spot treatment in Grain sorghum before heading. This product may also be applied 
over-the-top of Grain Sorghum with wiper applicators to control or suppress tall weeds. See the "SELECTIVE 
EQUIPMENT" section under “APPLICATION EQUIPMENT AND TECHNIQUES” of this label for additional instructions 
on the use of wiper applicators. 
 
USE RESTRICTIONS: For spot treatment, do not treat more than 10% of the total field area to be harvested. When 
applied with wiper applicators, allow at least 40 days between application and harvest. Do not use roller applicators. 
Do not feed or graze treated grain or Sorghum fodder. Do not ensile vegetation collected from within the treated area. 
 
Hooded Sprayers 
This product may be applied using a hooded sprayer for weed control in between rows of Grain sorghum. Apply before 
Grain sorghum sends tillers between the drill rows . If tillers are sprayed with this herbicide, the main plant could be 
damaged or destroyed. Contact of this product in any manner with any vegetation to which application is not intended 
could cause damage. Only hooded sprayers that completely enclose the spray pattern may be used. See additional 
instructions on the use of hooded sprayers in the “APPLICATION EQUIPMENT AND TECHNIQUE S” section of this 
label. 
 
USE RESTRICTIONS: Grain sorghum must be at least 12 inches tall measured without extending leaves. Do not graze 
or feed Grain sorghum forage or fodder following application of this product using a hooded sprayer. Do not apply more 
than 20 fluid ounces of this product per acre per hooded spray application and no more than 60 fluid ounces per acre 
per year total. 
 
Pre-harvest Applications 
Apply up to 40 fluid ounces of this product per acre after Grain sorghum has reached 30 % moisture or less. As with 
other herbicides that cause sudden plant death, avoid pre-harvest application of this product to Grain sorghum (Milo) 
infected with Charcoal rot as lodging can occur. 
 
USE RESTRICTIONS: Allow a minimum of 7 days between application and harvest of Grain sorghum. Pre-harvest 
application of this product on Grain sorghum (Milo) is not registered for use in California.

Page 34 of 143 
 
 
Post-harvest Applications 
This product may be applied for weed control after harvest of Grain sorghum. Higher application rates might be used 
to control large weeds that were growing in the field at the time of harvest. Tank -mixtures with 2,4-D or Dicamba may 
be used. It is the pes ticide user’s responsibility to ensure that all products are registered for the intended use. Read 
and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank-mixing. 
Users must follow the most restr ictive directions for use and precautionary statements of each product in the tank -
mixture. 
 
This product may be applied to Grain sorghum stubble following harvest to control or suppress regrowth. Apply 20 fluid 
ounces of this product per acre for control or 15 fluid ounces per acre for suppression. 
 
USE RESTRICTIONS: Pre-Harvest Interval (PHI): Allow a minimum of 7 days between application and harvest or 
feeding of vegetation within the application area. Application must be made at least 30 days prior to planting of any 
crop not listed on this label. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 Fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
HERBS AND SPICES 
[Allspice; Angelica; Star anise; Annatto (seed); Balm; Basil; Borage; Burnet; Camomile; 
Caper buds; Caraway; Black caraway ; Cardamom; Cassia bark; Cassia buds; Catnip; 
Celery seed; Chervil (dried) ; Chive; Chinese chive ; Cinnamon; Clary; Clove buds ; 
Coriander leaf (Cilantro or Chinese parsley); Coriander seed (Cilantro); Costmary; Culantro 
(leaf); Culantro (seed); Cumin; Curry (leaf); Dill (dillweed); Dill (seed); Epazote; Fennel seed 
(common and Florence) ; Fenugreek; Grains of paradise; Horehound; Hyssop; Juniper 
berry; Lavender; Lemongrass; Lovage (leaf and seed) ; Mace; Marigold; Marjoram 
(including Oregano); Oregano (Mexican); Mioga flower ; Mustard (seed) ; Nasturtium; 
Nutmeg; Parsley (dried) ; Pennyroyal; Pepper (black and white) ; Pepper leaves; 
Peppermint; Perilla; Poppy (seed); Rosemary; Rue; Saffron; Sage; Savory (summer and 
winter); Spearmint; Stevia leaves ; Sweet bay; Tansy; Tarragon; Thyme; Vanilla; White 
ginger flower; Wintergreen; Woodruff; Wormwood] 
 
TYPES OF APPLICATIONS: Those listed in " ANNUAL AND PERENNIAL CROPS" plus the following: Wiper 
Applications and Spot Treatments on Peppermint and Spearmint Only. 
 
USE PRECAUTIONS: This product could cause crop injury w hen applying this product prior to transplanting or 
direct-seeding crops into plastic mulch. R emove residual product from the plastic prior to planting with a single 
one-half inch application of water, either by natural rainfall or by irrigation. Make sure that the washwater flushes 
off the plastic mulch and does not enter the transplant holes. Application made a t crop emergence will result in injury 
or death of emerged seedlings. 
 
Spot Treatments, Wiper Applications (Peppermint and Spearmint Only) 
This product may be applied as a spot treatment in Peppermint and Spearmint or over-the-top of Peppermint and 
Spearmint using a wiper applicator to control tall weeds . Application may be repeated in the same area at 30 day 
intervals. See additional instructions on the use of wiper applicators in the “SELECTIVE EQUIPMENT” section under 
“APPLICATION EQUIPMENT AND TECHNIQUES” of this label. 
 
USE RESTRICTIONS: Pre-Harvest Interval (PHI): Allow a minimum of 7 days between application and harvest. For 
spot treatment application, do not apply this product to more than 10% of the total field area to be harvested. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 Fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac)

Page 35 of 143 
 
 
OILSEED CROPS 
[Buffalo gourd (seed), Canola, Flax, Jojoba, Lesquerella, Meadowfoam, Mustard, Rape, 
Safflower, Sesame, Sunflower] 
TYPES OF APPLICATIONS: Those listed in " ANNUAL AND PERENNIAL CROPS" plus the following: Pre -harvest 
(except Buffalo gourd). 
 
For Canola with Glyphosate resistant and Glyphosate Tolerant Technology and TruFlexTM Canola with 
Glyphosate resistant and Glyphosate Tolerant Technology, see the "GLYPHOSATE RESISTANT AND 
GLYPHOSATE TOLERANT CROPS" section of this label. 
 
Refer to the following table for maximum application rates of this product for use in Safflower, Sunflower and all other 
oilseed crops listed in this section, if a pre-harvest application is to be made. If a pre-harvest application is NOT to be 
made, the maximum application rate of this product for all pre-emergence, selective equipment and post -harvest 
applications in any oilseed crop listed in this section is limited only to a maximum of 160 fluid ounces ( 5 qt.) per acre 
per year. If a pre-harvest application is intended to be made to any crop listed in this section, except Buffalo gourd, the 
maximum combined total of all pre-emergence and selective equipment applications is limited as indicated in the 
following table. See the “PRODUCT INFORMATION” section of this label for more information on maximum application 
rates. 
 
Maximum Application Rates (Fl. Oz./A) if a Pre-harvest Application is Made 
Safflower 
Combined total for all pre-emergence and selective equipment applications 60 
Pre-harvest application 60 
Sunflower 
Combined total for all pre-emergence and selective equipment applications 20 
Pre-harvest application 20 
All Other Oilseed Crops Listed (Except Buffalo gourd) 
Combined total for all pre-emergence and selective equipment applications 40 
Pre-harvest application 30 
 
USE RESTRICTIONS: Do not exceed a total application rate of 16 0 fluid ounces (5 qt.) of this product per acre per 
year. Pre-harvest application is not permitted on Buffalo gourd. 
 
Pre-plant, At-planting, Pre-emergence 
This product may be applied before, during or after planting oilseed crops listed above prior to emergence of the listed 
oilseed crops. Observe the maximum application rates for listed at the beginning of this section. 
 
TANK-MIXTURES: For Sunflower, tank-mixture with Pendimethalin may be applied before, during or after planting into 
conventionally tilled soil, a cover crop, established sod or in previous crop residue. 
 
Selective Equipment 
Wiper applicators or shielded sprayers may be used between the rows once the crop is established. Observe the 
maximum application rates listed at t he beginning of this section. See additional instructions on the use of wiper 
applicators and hooded sprayers in the “SELECTIVE EQUIPMENT” section under “APPLICATION EQUIPMENT AND 
TECHNIQUES” of this label. 
 
Pre-harvest Applications (Except Buffalo Gourd) 
This product provides weed control and serves as a harvest aid when applied to a physiologically mature oilseed crops 
listed on this section. For Safflower, apply up to 60 fluid ounces of this product per acre when seed has lost its opaque 
character approximately 20 to 30 days after the end of flowering of the secondary branches . For Sunflower, apply up 
to 20 fluid ounces of this product per acre when the backsides of Sunflower heads are yellow and bracts are turning 
brown and seed moisture content is less than 35 %. For all other oilseed crops listed on this section (except Bufffalo 
gourd), up to 30 fluid ounces of this product per acre may be applied up to harvest. 
 
USE RESTRICTIONS: DO NOT MAKE A PRE-HARVEST APPLICATION if you have exceeded the maximum 
application rates for the combined total of all pre-emergence and selective equipment applications listed in the table at 
the beginning of this section. If applicable, make only one pre-harvest application of this product and allow a minimum 
of 7 days between application and harvest or feeding to livestock. Pre-Harvest Interval (PHI): Application must be made 
at least 30 days prior to the planting of any crop not listed on this label. Pre-harvest application is not allowed on Buffalo 
gourd or on Canola Glyphosate resistant and Glyphosate Tolerant or TruFlex Canola with Glyphosate resistant and 
Glyphosate Tolerant Technology or other listed Glyphosate tolerant crops.

Page 36 of 143 
 
Post-harvest Applications 
This product may be applied for weed control after harvest of oilseed crops. Higher application rates might be required 
for control of large weeds that were growing in the field at the time of harvest. Tank-mixtures with 2,4-D or Dicamba 
may be used. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. 
Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank-
mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the 
tank-mixture. 
 
USE RESTRICTIONS: Do not exceed a total application rate of 160 fluid ounces ( 5 qt.) of this product per acre per 
year. Pre-Harvest Interval (PHI): Allow a minimum of 7 days between application of this product and harvest or feeding 
of vegetation within the application area. Application must be made at least 30 days prior to the planting of any crop 
not listed on this label. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 Fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
PASTURE GRASSES, FORAGE LEGUMES, AND RANGELAND 
Refer to the “ANNUAL WEEDS” and “PERENNIAL WEEDS” found under the “WEEDS CONTROLLED” section of this 
label for application rates of this product for specific weeds. When applied as directed, this product will control the listed 
annual and perennial grasses and broadleaf weeds. Application rates specified on this label for the control of hard-to-
control weeds or those specified on separate supplemental labeling supersede rates listed in the “WEEDS 
CONTROLLED” section. 
 
Alfalfa, Clover and Other Forage Legumes 
[Alfalfa, Clover, Kenaf, Kudzu, Lespedeza, Leucaena, Lupin, Sainfoin, Trefoil, Velvet bean, 
Vetch (all types)] 
 
TYPES OF APPLICATION: Pre -plant, At-Planting, Pre-emergence, Spot Treatment , Wiper Applicator , Pre-harvest 
(except Kenaf and Leucaena), Stand Removal. 
 
For directions for use with Alfalfa with Glyphosate resistant and Glyphosate Tolerant Technology , see the 
“GLYPHOSATE RESISTANT AND GLYPHOSATE TOLERANT CROPS” section of this label. 
 
Pre-plant, At-planting, Pre-emergence 
This product may be applied before, during or after planting crops listed in this section but prior to crop emergence 
 
USE RESTRICTIONS: Remove domestic livestock before application. 
 
Spot Treatment, Wiper Applicator 
This product may be applied as a spot treatment or over-the-top of crops listed in this section using a wiper applicator. 
See additional instructions on the use of wiper applicators in the “SELECTIVE EQUIPMENT” section under 
“APPLICATION EQUIPMENT AND TECHNIQUES” of this label. Application may be repeated in the same area at 30 
day intervals. 
 
USE RESTRICTIONS: For spot treatment and use with a wiper applicator , apply in areas where the movement of 
domestic livestock can be controlled. Remove domestic livestock before application and wait a minimum of 3 days after 
application before grazing livestock or harvesting. Do not apply this product to more than 10% of the total field area at 
any one time. 
 
Weed Control in Dormant Alfalfa 
This product will control or suppress many weeds including Cheatgrass, Downy brome, and Q uackgrass in dormant 
Alfalfa. Apply 5 to 8 fluid ounces of this product per acre in the Spring when Alfalfa is dormant after Spring temperatures 
have warmed enough to encourage weed growth but prior to initiation of trifoliate leaf expansion of the Alfalfa crop . 
Application made after expansion of the first trifoliate leaf will cause growth reduction and reduced crop yield. 
 
USE PRECAUTIONS: Improper application of this product to Alfalfa can cause crop injury. Do not use this product on 
dormant Alfalfa if a slight yield reduction in the first cutting cannot be tolerated. Slight discoloration of the Alfalfa crop 
could occur but will regreen and resume growth under moist soil conditions as effects of this product wear off.

Page 37 of 143 
 
USE RESTRICTIONS: Do not add ammonium sulfate to spray solutions of this product for application to dormant 
Alfalfa. Do not make more than one application per year . Allow at least 36 hours after application before grazing 
livestock or harvesting. 
 
Pre-harvest (Except Kenaf and Leucaena), Stand Removal 
This product may be applied as a broadcast application prior to harvest (except in Kenaf and Leucaena) in declining 
stands or in any stand where severe crop injury or destruction is acceptable or to remove established stands of any 
forage legumes listed in this section. Application may be made at any time of the year to control annual and perennial 
weeds including Quackgrass. For control of Quackgrass, apply in the Spring, late Summer or Fall when Quackgrass is 
actively growing. Follow application with deep tillage for complete control of Quackgrass. If the crop is to be harvested 
or grazed by livestock, apply up to 40 fluid ounces of this product per acre in Alfalfa and up to 30 fluid ounces per acre 
in all other legumes listed in this section. For complete removal of established stands of Clover, it might be necessary 
to use a higher application rate as listed in the “PERENNIAL WEEDS” found under the “WEEDS CONTROLLED” 
section of this label. 
 
USE PRECAUTIONS: This application can destroy an Alfalfa stand and severely injure or destroy other legume crops 
listed including Clover. Pre-harvest application on Alfalfa grown for seed could result in a reduction in germination or 
vigor. 
 
USE RESTRICTIONS: Make only one application to an existing crop stand per year. Remove domestic livestock before 
application. Foliage within the application area can be harvested and fed to livestock according to the application rates 
and intervals defined in the following table. If applying at a rate greater than those listed here, do not harvest foliage for 
livestock feed or allow livestock to graze within the application area. 
 
 
Crop 
Maximum Single Pre-harvest 
Application Rate 
(Fl. Oz./A) 
Minimum Interval Between 
Application and Harvest or 
Livestock Grazing 
Alfalfa 40 36 hrs. 
All other listed legumes 30 3 days 
 
Crops listed on this label may be planted in the application area at any time. All other crops may be planted 30 days 
after application. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 Fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
Conservation Reserve Program (CRP) 
TYPES OF APPLICATION: Post-emergence Weed Control in Dormant CRP Grasses , Wiper Applicator, Renovation 
(rotating out of CRP), Site Preparation 
 
Post-emergence Weed Control in Dormant CRP Grasses, Wiper Applicator 
Apply this product to suppress competitive growth and seed production of undesirable vegetation on CRP land . 
Application may be made using a wiper applicator to control tall weeds or as a broadcast application or spot treatment 
to dormant CRP grasses. For selective weed control using broadcast application equipment, apply 4 to 8 fluid ounces 
of this product per acre in early Spring before desirable CRP grasses including Crested and T all wheatgrass, break 
dormancy and initiate green growth. Late Fall application may be made after desirable perennial grasses have reached 
dormancy. 
 
USE PRECAUTIONS: Some stunting of CRP perennial grasses will occur if broadcast application is made when plants 
are not dormant. 
 
USE RESTRICTIONS: Do not apply more than 6 0.8 fluid ounces (1.9 qt.) of this product per acre per year onto CRP 
land. No waiting period is required between application and grazing or harvesting for feed. 
 
Renovation (Rotating Out of CRP), Site Preparation 
This product may be used to prepare CRP land for crop production. Refer to Federal, State or local use guides for CRP 
renovation information. 
 
USE RESTRICTIONS: Crops listed on this label may be planted into the area at any time. A ll other crops may be 
planted 30 days after application.

Page 38 of 143 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 Fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
Grass Seed and Sod Production 
[Any grass (Gramineae family) except Corn, Sorghum, Sugarcane, and those 
listed in the “Cereal and Grain Crops” section of this label] 
 
TYPES OF APPLICATION: Pre-plant, At-Planting, Pre-emergence, Renovation, Removal of Established Stands, Site 
Preparation, Shielded Sprayer, Wiper Applicator, Spot Treatment, Creating Rows in Annual Ryegrass. 
 
Pre-plant, At-Planting, Pre-emergence, Renovation, Removal of Established Stand, Site Preparation 
This product controls most existing vegetation for purposes of renovating T urf or forage grass seed production areas 
or for establishing Turfgrass grown for sod. It may be used to destroy undesirable grass vegetation when production 
fields are converted to alternate species or crops . Do not disturb soil or underground plant parts before application. 
Delay tillage or renovation techniques including vertical mowing, coring, and slicing for at least 7 days after application 
to allow herbicide translocation into underground plant parts. 
 
Apply before, during or after planting or for renovation purposes . Where existing vegetation is growing under mowed 
Turfgrass management, apply this product after omitting at least one regular mowing to allow sufficient growth for good 
interception of the herbicide spray. For maximum control of existing vegetation, delay planting to determine if any 
regrowth of underground plant parts will occur . Where repeat applications are necessary, sufficient regrowth must be 
attained prior to application. For warm season grasses including Bermudagrass, Summer or Fall application provides 
enhanced control. Broadcast application of this product may be used to control sod remnants or other unwanted 
vegetation after sod is harvested. Application rates of up to 99.2 fluid ounces (3.1 qt.) per acre may be used to totally 
remove an established stand of tough to kill grass species. 
 
USE RESTRICTIONS: If application rate is 6 0.8 fluid ounces (1.9 qt.) per acre or less , no waiting period between 
application and feeding or livestock grazing is required. If the rate is greater than 6 0.8 fluid ounces (1.9 qt.) per acre, 
remove domestic livestock before application and wait 8 weeks after application before grazing or harvesting. Crops 
listed on this label may be planted into the area at any time. All other crops may be planted 30 days after application. 
 
Shielded Sprayer 
Apply 20 to 60 fluid ounces of this product in 10 to 20 gallons of water per acre using shielded sprayer to control weeds 
between grass seed rows. Uniform planting in straight rows will aid shielded sprayer application. Enhanced results are 
obtained when the grass seed crop is small enough to easily pass by the protective shields. See additional instructions 
on the use of shielded sprayers in the “SELECTIVE EQUIPMENT” section under “APPLICATION EQUIPMENT AND 
TECHNIQUES” of this label. 
 
Contact of this product in any manner to any vegetation to which application is not intended could cause damage. 
 
Wiper Applicator 
This product may be applied over -the-top of desirable grasses using a wiper applicator to control tall weeds . See 
additional instructions on the use of wiper applicators in the “SELECTIVE EQUIPMENT” section under “APPLICATION 
EQUIPMENT AND TECHNIQUES” of this label. 
 
Droplets, mist, foam or splatter of the herbicide solution settling onto desi rable vegetation could result in discoloration 
stunting or destruction. 
 
Spot Treatment 
Apply 0.9% solution of this product using a handheld sprayer to control weeds within established vegetation prior to 
heading of grasses grown for seed or to control sod remnants or other unwanted vegetation after sod is harvested. 
 
This product will kill the desirable grass es along with the weeds. Take care not to spray or allow spray to drift outside 
the target area to avoid unwanted crop destruction. 
 
Creating Rows in Annual Ryegrass 
Use low pressure nozzles or drop nozzles designed to target the application over a narrow band. Set nozzle height to 
allow the establishment of the desired row spacing. Apply 10 to 20 fluid ounces of this product per acre . Enhanced 
results can be obtained when application is made before Ryegrass reaches 6 inches in height . Use the higher 
application rate within this range when Ryegrass is greater than 6 inches in height.

Page 39 of 143 
 
 
Take care not to spray or allow spray to drift outside target area to avoid unwanted crop destruction. To the extent 
consistent with applicable law , grower assumes all responsibility for crop losses resulting from misapplication of this 
product. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 Fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
Pastures 
[Bahiagrass, Bermudagrass, Bluegrass, Brome, Fescue, Guineagrass, 
Kikuyugrass, Orchardgrass, Pangola grass , Ryegrass, Timothy, Wheatgrass 
and any Grass (Gramineae family) except Corn, Sorghum, Sugarcane, and 
those listed in the “Cereal and Grain Crops” section of this label] 
 
TYPES OF APPLICATION: Pre-plant, Pre-emergence, Pasture Renovation, Spot Treatment, Wiper Applicator, Post-
emergence Weed Control (Broadcast application). 
 
Pre-plant, Pre-emergence, Pasture Renovation 
This product may be applied for weed control before planting or emergence of forage grasses. This product may also 
be applied to control perennial pasture species listed on this label prior to replanting. 
 
USE RESTRICTIONS: If application rates total 60.8 fluid ounces (1.9 qt.) of this product per acre or less , no waiting 
period between application and feeding or livestock grazing is required. If the rate is greater than 60.8 fluid ounces (1.9 
qt.) per acre, remove domestic livestock before application and wait 8 weeks after application before grazing or 
harvesting. Crops listed on this label may be planted into the area at any time. All other crops may be planted 30 days 
after application. 
 
Spot Treatment, Wiper Applicator 
This product may be applied in pastures as a spot treatment or over -the-top of desirable grasses using a wiper 
applicator to control tall weeds. To achieve maximum performance, remove domestic livestock before application and 
wait at least 7 days after application before grazing livestock or harvesting for feed. Application may be repeated in the 
same area at 30 day intervals . See additional instructions on the use of wiper applicators in the “SELECTIVE 
EQUIPMENT” section under “APPLICATION EQUIPMENT AND TECHNIQUES” of this label. 
 
USE RESTRICTIONS: For spot treatment or use with a wiper applicator at rates of 60.8 fluid ounces (1.9 qt.) per acre 
or less, this product may be applied over the entire pasture or any portion of it . At rates above 60.8 fluid ounces (1.9 
qt.) per acre, this product may be applied over no more than 10% of the total pasture at any one time. Application may 
be repeated in the same area at 30 day intervals. 
 
Post-emergence Weed Control (Broadcast Application) 
This product may be applied to pastures to suppress competitive growth and seed production of annual weeds and 
other undesirable vegetation. For selective weed control using broadcast application equipment, apply 8 to 10 fluid 
ounces of this product per acre in early Spring before desirable perennial grasses break dormancy and initiate green 
growth. Late Fall application may be made after desirable perennial grasses have reached dormancy. 
 
Some stunting of perennial grasses will occur if broadcast application is made when plants are not dormant . Higher 
application rates to control hard-to-control weeds may be used, however, higher rates will cause stand reduction. 
 
USE RESTRICTIONS: No waiting period is required between application and grazing or harvesting for feed. Do not 
apply more than 60.8 fluid ounces (1.9 qt.) of this product per acre per year on pasture grasses except for renovation 
use as described on this label . If replanti ng is needed due to severe stand reduction, wait a t least 30 days after 
application before planting any crop not listed on this label. 
 
Weed Suppression in Dormant Pastures 
This product may be applied in dormant pastures to suppress competitive growth and seed production of annual weeds 
and other undesirable vegetation. Apply 8 to 10 fluid ounces of this product per acre using broadcast application 
equipment on pastures in late -fall after desirable perennial grasses have reached dormancy or in late -winter before 
desirable perennial grasses break dormancy and initiate green growth.

Page 40 of 143 
 
 
USE PRECAUTIONS: Higher application rates may be used for hard-to-control weeds; however, higher rates can cause 
stand reduction. Some stunting of perennial grasses can occur if broadcast application is made when they are not 
dormant. 
 
USE RESTRICTIONS: No waiting period is required between application and grazing or harvesting for feed. Do not 
apply more than 60.8 fluid ounces (1.9 qt.) of this product per acre per year onto pasture grasses except for renovation. 
If reseeding is needed due to severe stand reduction, no waiting period is required after application of this product 
before seeding the pasture grasses listed at the beginning of this section; for all other pasture grasses, wait a minimum 
of 30 days after application before seeding. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Rangeland 
This product will control or suppress many annual weeds growing in perennial cool and warm season grass rangeland. 
Slight discoloration of the desirable grasses could occur but will regreen and resume growing under moist soil conditions 
as effects of this product wear off. 
Preventing seed production is critical to the control of invasive annual grassy weeds on rangeland. Yearly application 
of this product to eliminate invasive annual weeds before they produce seed will help eliminate viable weed seeds from 
the soil. Delay grazing of the area after application of this product to allow desirable perennials to grow, flower and re-
seed the area. 
Bromus Control: A broadcast application of 4 to 10 fluid ounc es of this product per acre will control or suppress 
Cheatgrass (Bromus secalinus), Cereal rye, Downy brome (Bromus tectorum), Japanese brome (Bromus japonicus), 
Jointed goatgrass and Soft chess (Bromus mollis) on rangeland. For enhanced results, apply this product when most 
Brome plants are in early -flower and before the plants, including seedheads turn color. Allow for secondary weed 
flushes to occur after spring rains to further deplete the seed reserve in the soil and encourage perennial grass 
conversion on weedy sites. Apply this product in the F all in areas where spring moisture is normally limited and F all 
germination allows for good weed growth and weed seed depletion. 
Medusahead Control: To control or suppress Medusahead, apply 10 fluid ounces of this product per acre at the 3 leaf 
stage. Delaying application beyond this stage will result in reduced or unacceptable control. Controlled burning prior to 
application of this product will eliminate the thatch layer produced by slowly decaying culms. Allow new weed growth 
to occur before applying this product after a burn. Repeat this application annually to eliminate M edusahead seeds in 
the soil and allow desirable perennial grasses to repopulate the area. 
USE RESTRICTIONS: Do not apply more than 60.8 fluid ounces (1.9 qt.) of this product per acre per year on rangeland. 
Do not use ammonium sulfate when applying this product on rangeland grasses. No waiting period between application 
of this product and feeding or livestock grazing is required. 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 10 fl. Oz/Ac (0.38 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 10 fl. Oz/Ac (0.38 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 60 fl. Oz/Ac (2.25 Lbs AE/Ac) 
SOYBEANS 
TYPES OF APPLICATIONS: Those listed in the section "ANNUAL AND PERENNIAL CROPS" plus the following: Spot 
Treatment, Selective Equipment, Pre-harvest, 
 
For Soybeans with Glyphosate resistant and Glyphosate Tolerant Technology and other Glyphosate tolerant Soybeans, 
see the "GLYPHOSATE RESISTANT AND GLYPHOSATE TOLERANT CROPS" section of this label.

Page 41 of 143 
 
Pre-plant, At-Planting, Pre-emergence 
This product may be applied alone or in a tank-mixture before, during or after planting Soybeans prior to emergence of 
the crop. 
 
TANK-MIXTURES: This product may be tank-mixed with 2,4-D, 2,4-DB or Dicamba applied prior to planting only. This 
product may also be tank-mixed with other herbicides (examples are listed below) and applied prior to crop emergence. 
Apply these tank-mixtures in 10 to 20 gallons of water per acre. 
 
Acetochlor 
Carfentrazone-ethyl 
Chlorimuron-ethyl 
Clethodim 
Clomazone 
Cloransulam-methyl 
Dimethenamid 
Dimethenamid-P 
Fenoxaprop 
Fluazifop-p-butyl 
Flufenacet 
Flumetsulam 
Flumiclorac pentyl ester 
Flumioxazin 
Fluthiacet-methyl 
Fomesafen 
Imazaquin 
Imazethapyr 
Lactofen 
Linuron 
Metolachlor 
Metribuzin 
Pendimethalin 
Pyroxasulfone 
Quizalofop-p-ethyl 
S-Metolachlor 
Saflufenacil 
Sulfentrazone 
Thifensulfuron 
Tribenuron-methyl 
Trifluralin 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions, limitations, and directions for use on all product labels involved in tank -mixing. Users must 
follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
For hard-to-control annual weeds including Barnyardgrass, Crabgrass, Fall panicum, Shattercane and broadleaf 
Signalgrass up to 2 inches tall, and Pennsylvania sm artweed up to 6 inches tall, apply this product at 20 fluid ounces 
per acre in these tank -mixtures. For other labeled annual weeds, apply 15 to 20 fluid ounces of this product per acre 
when weeds are less than 6 inches tall and 20 to 30 fluid ounces when weeds are over 6 inches tall. 
 
Spot Treatment 
For spot treatments, apply this product prior to initial pod set in Soybeans. 
 
USE RESTRICTIONS: Do not treat more than 10% of the total field area to be harvested. 
 
Selective Equipment 
This product may be applied to Soybeans using shielded applicators, hooded sprayers, wiper applicators or sponge 
bars. See "SELECTIVE EQUIPMENT" under the "APPLICATION EQUIPMENT AND TECHNIQUES" section of this 
label for additional information. 
 
USE RESTRICTIONS: Allow at least 7 days between application and harvest. 
 
Pre-harvest Applications 
This product may be applied to Soybeans prior to harvest after pods have set and lost all green color. Apply at rates 
given in the "ANNUAL WEEDS" and “PERENNIAL WEEDS" found under the “WEEDS CONTROLLED” section of this 
label. Take care to avoid excessive seed shatter loss due to ground application equipment. 
 
USE RESTRICTIONS: Do not appl y more than 99.2 fluid ounces ( 3.1 qt.) of this product per acre for pre-harvest 
applications using ground equipment. Do not apply more than 40 fluid ounces (1.25 qt.) per acre of this product by air. 
Pre-Harvest Interval (PHI): Allow a minimum of 7 days between application and harvest of Soybeans. If the pre-harvest 
application rate is greater than 20 fluid ounces (0.625 qt.) of this product per acre, do not graze or harvest treated hay 
or fodder for livestock feed within 25 days of last application. If the application rate is 20 fluid ounces (0.625 qt.) per 
acre or lower, the grazing restriction is reduced to 14 days after the last application. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 Fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
SUGARCANE 
TYPES OF APPLICATIONS: Those listed in the section "ANNUAL AND PERENNIAL CROPS" plus the following: Spot 
Treatment.

Page 42 of 143 
 
 
Pre-plant, At-Planting, Pre-emergence 
This product may be applied in or around Sugarcane fields or in fields prior to the emergence of plant cane. 
 
USE RESTRICTIONS: Do not a pply to vegetation in or around ditches, canals or ponds containing water to be used 
for irrigation. 
 
Spot Treatment 
This product may be applied as a spot treatment in Sugarcane. 
For control of volunteer or diseased Sugarcane, apply a 1% solution of this product in water using a handheld sprayer 
and a spray-to-wet technique. Enhanced results can be obtained on volunteer or diseased Sugarcane when application 
is made when there are at least 7 new leaves. Avoid spray contact with healthy Sugarcane plants since severe damage 
or destruction may result. 
 
USE RESTRICTIONS: Do not feed or graze treated Sugarcane foliage within the application area. 
 
Hooded Sprayers 
This product may be applied using hooded sprayers for weed control between the rows of Sugarcane. See "SELECTIVE 
EQUIPMENT" under the "APPLICATION EQUIPMENT AND TECHNIQUES" section of this label for additional 
information. Do not allow treated weeds to come into contact with the crop. 
 
Fallow Treatments 
This product may be used as a replacement for tillage in fields that are lying fallow between Sugarcane crops. This 
product may also be used to remove the last stubble of ratoon cane at the rate of 80 to 99.2 fluid ounces (2.5 to 3.1 qt.) 
of this product in 10 to 40 gallons of water per acre to new growth having at least 7 new leaves. Allow at least 7 days 
after application before tillage. Applications up to 60 fluid ounces per acre may be made by aerial application in fallow 
sites where there is sufficient buffer to prevent drift onto adjacent crops. Tank -mixtures with 2,4-D and Dicamba may 
be used. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read 
and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank-mixing. 
Users must follow the most restrictive directions for use and precautionary statements of each product in the tank -
mixture. 
 
Sugarcane Ripening 
This product may be used as a foliar -applied plant growth regulator to hasten ripening and extend the period of high 
level of sucrose in both low and high tonnage Sugarcane. Most of the sucrose increase is concentrated in the top nodes 
of the cane stalk. To maximize sugar recovery where topping is practiced at harvest, top at the base of the fourth leaf. 
Consult your st ate Sugarcane authority or Manufacturer’s representative regarding the degree of sucrose response 
that can be anticipated prior to application of this product. 
 
As a result of leaf desiccation, improved trash burn can be expected. 
 
Apply this product at the following rates and timing according to the State in which the Sugarcane is grown. Use the 
higher application rate within the given range when applying to Sugarcane under adverse ripening conditions or less 
responsive varieties. 
 
FLORIDA—Apply 4 to 10 fluid ounces of this product per acre 3 to 5 weeks before harvest of LAST RATOON CANE 
ONLY. 
 
HAWAII—Apply 8 to 18 fluid ounces of this product per acre 4 to 10 weeks before harvest. 
 
LOUISIANA—Apply 4 to 10 fluid ounces of this product per acre 3 to 7 weeks before harvest of RATOON CANE ONLY. 
 
PUERTO RICO—Apply 4 fluid ounces of this product per acre 3 to 5 weeks before harvest of RATOON CANE ONLY. 
 
TEXAS—Apply 4 to 10 fluid ounces of this product per acre 3 to 5 weeks before harvest of RATOON CANE ONLY. 
 
Application of this product could initiate development of Shooting eyes. This product might not increase the sucrose 
content of Sugarcane under conditions of good natural ripening. Within 2 to 3 weeks after application, this product could 
produce a slight yellowing to a pronounced browning and drying of leaves and a shortening of upper internodes. Spindle 
death could occur. 
 
Rainfall within 6 hours after application could reduce the effectiveness of this product. 
 
Application to Sugarcane grown for seed could result in a reduction in germination or vigor.

Page 43 of 143 
 
USE RESTRICTIONS: Do not feed or graze Sugarcane forage following application. Do not plant subsequent crops 
within 30 days after application of this product other than the following: A lfalfa or other forage legumes , Beans (all 
types), Corn (all types) , Cotton, Melons (all types) , Pasture grasses, Peanuts, Potatoes (Irish or Sweet) , Sorghum 
(Milo), Soybeans, Squash (all types) or Wheat. 
 
Do not apply for enhanced ripening to any crops other than Sugarcane. Use of this product in any manner not consistent 
with this label could result in injury to persons, animals or crops or other unintended consequences. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 60 fl. Oz/Ac (2.25 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
TREE, VINE, AND SHRUB CROPS 
THIS SECTION GIVES DIRECTIONS THAT APPLY TO ALL LISTED TREE, VINE, AND SHRUB CROPS. SEE THE 
INDIVIDUAL CROP SECTIONS FOR SPECIFIC INSTRUCTIONS, PRE -HARVEST INTERVALS, PRECAUTIONS 
AND RESTRICTIONS. 
 
TYPES OF APPLICATIONS: Pre -plant (site preparation), Broadcast Spray, Selective Equipment (shielded sprayer, 
wiper applicator), Directed Spray and Spot Treatment in Middles (between rows of trees, vines or bushes) and Strips 
(within rows of trees, vines or bushes), Site Weed Control, Perennial Grass Suppression, Cut Stump Application. 
 
Except as directed, applications may be made with boom sprayer, controlled droplet applicator ( CDA), shielded 
sprayers, handheld or backpack sprayers, lance or orchard guns or with wiper applicators in middles (between rows of 
trees, vines or bushes) and strips (within rows of trees, vines or bushes), for weed control or perennial grass 
suppression in established tree fruit and nut groves, orchards and vineyards . It may also be used for site preparation 
prior to planting or transplanting these crops. 
 
Apply 10 fluid ounces to 3. 1 quarts of this product per acre as directed in the “ANNUAL WEEDS” and “PERENNIAL 
WEEDS” found under the ‘WEEDS CONTROLLED” section of this label. Use a higher application rate within a given 
range when weeds are stressed, growing in dense populations or greater than 12 inches tall. Application may be 
repeated as needed up to a maximum of 216 fluid ounces ( 6.75 qt.) of this pr oduct per acre per year. See the 
“PRODUCT INFORMATION” section of this label for more information on maximum application rates. 
 
USE PRECAUTIONS: Use extreme care to avoid contact of herbicide solution, spray, drift or mist with foliage or green 
bark of trunk, branches, suckers, fruit or other parts of desirable trees, canes, and vines. Avoid applications when recent 
pruning wounds or other mechanical injury has occurred. Contact of this product with other than matured brown bark 
can result in serious crop damage or destruction. Only shielded or directed sprayers may be used in crops with potential 
for crop contact is high and then only where there is sufficient clearance. For applications in strips (within rows of trees), 
only selective equipment (directed sprays, hooded sprayers, shielded sprayer or wiper applicators) may be used to 
minimize the potential for overspray or drift of this product onto crop. For Berry crops, hooded sprayers must be fully 
enclosed including top, sides, front , and back. Only wiper applicators or shielded sprayers capable of preventing all 
contact of this product with the crop may be used. See "SELECTIVE EQUIPMENT" under the "APPLICATION 
EQUIPMENT AND TECHNIQUES" section of this label for additional information. 
 
USE RESTRICTIONS: Allow at least 3 days between application and transplanting. 
 
Middles (Between Rows) 
This product will control or suppress annual and perennial weeds and ground covers growing between rows of shrubs, 
trees, and vine crops listed on this label. If weeds are under drought stress, irrigate prior to application. Reduced control 
may result if weeds have been recently mowed at the time of application. 
 
TANK-MIXTURES: A tank-mixture of this product with Oxyfluorfen may be applied for annual weed control in between 
rows (middles) of a variety of shrubs, trees, and vine crops when weeds are stressed or growing in dense populations. 
 
10 to 20 fluid ounces of this product plus appropriate rate of Oxyfluorfen per acre will control annual weeds 
with a maximum height or length of 6 inches including the following: 
 
Crabgrass 
Filaree (suppression) 
Groundsel (Common) 
Horseweed/Marestail (Conyza 
canadensis) 
Junglerice 
Lambsquarters (Common) 
London rocket 
Pigweed (Redroot) 
Purslane (Common) (suppression) 
Ryegrass (Common) 
Shepherdspurse 
Sowthistle (Annual) 
Stinging nettle

Page 44 of 143 
 
 
10 to 20 fluid ounces of this product plus appropriate rate of Oxyfluorfen per acre will control the following 
weeds with maximum height or length of 3 inches: 
 
Cheeseweed (common) Hairy fleabane (Conyza bonariensis) 
 
This product may also be applied to row middles in tank -mixtures with the following herbicides (examples are listed 
below): 
 
Bromacil 
Clethodim 
2,4-D 
Diuron 
Fluazifop-p-butyl 
Flumioxazin 
Glufosinate ammonium 
Indaziflam 
Napropamide 
Norflurazon 
Oryzalin 
Oxyfluorfen 
Pendimethalin 
Penoxsulam 
Pyraflufen-ethyl 
Rimsulfuron 
Saflufenacil 
Sethoxydim 
Thiazopyr 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
Strips (Within Rows) 
This product may be also be applied within rows of shrubs, trees, and vine crops in tank -mixtures with the products 
listed above for use in row middles. It is the pesticide user’s responsibility to ensure that all products are registered for 
the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels 
involved in tank-mixing. Users must follow the most restrictive directions for use and precautionary statements of each 
product in the tank-mixture. 
 
RESTRICTIONS: Do not apply these tank-mixtures in Puerto Rico. 
 
Perennial Grass Suppression 
This product will suppress perennial grasses including Bahiagrass, Bermudagrass, Kentucky bluegrass, Orchardgrass, 
Quackgrass, and Tall fescue that are grown as ground covers in shrubs, trees, and vine crops. 
 
For suppression of Fine fescue, Orchardgrass, Quackgrass, and Tall fescue: Apply 4 fluid ounces of this product 
in 10 to 20 gallons of water per acre. 
 
For suppression of Kentucky bluegrass covers: Apply 4 fluid ounces of this product per acre. Do not add ammonium 
sulfate. For enhanced results, mow cool season grass covers in the Spring to even their height and apply this product 
3 to 4 days after mowing. 
 
For suppression of vegetative growth and seed head inhibition of Bahiagrass for approximately 45 days: Apply 
4 fluid ounces of this product in 10 to 25 gallons of water per acre 1 to 2 weeks after full green-up or after mowing to a 
uniform height of 3 to 4 inches prior to seed head emergence. For suppression up to 120 days, apply 2.5 fluid ounces 
of this product per acre followed by an application of 1.25 to 2.5 fluid ounces per acre about 45 days later. Make no 
more than 2 applications per year. 
 
For burndown of Bermudagrass: Apply 20 to 40 fluid ounces of this product in 3 to 20 gallons of water per acre. Use 
this treatment only if reduction of the Bermudagrass stand can be tolerated. When burndown is needed prior to harvest, 
make application at least 21 days before harvest to allow sufficient time for burndown to occur. 
 
For suppression of Bermudagrass: Apply 4 to 10 fluid ounces of this product per acre east of the Rocky Mountains 
and 10 fluid ounces of this product per acre w est of the Rocky Mountains. Apply in a total spray volume of 3 to 20 
gallons per acre no sooner than 1 to 2 weeks after full green-up. If the B ermudagrass is mowed prior to application, 
maintain a minimum of 3 inches in height. Sequential applications may be made when regrowth occurs and 
Bermudagrass injury and stand reduction can be tolerated. In areas east of the Rocky Mountains, apply 4 to 6 fluid 
ounces of this product per acre in shaded conditions or where a lesser degree of suppression is desired. 
 
Cut Stump Application 
Application of this product to a freshly cut tree stump may be made during site preparation or site renovation to control 
regrowth and resprouting of stumps of many tree species, some of which are listed below. 
 
Citrus Trees - Calamondin, Chironja, Citron, Citrus hybrids, Grapefruit, Kumquat, Lemon, Lime, Mandarin 
(Tangerine), Orange (all), Pummelo, Tangelo (Ugli), Tangor.

Page 45 of 143 
 
Fruit Trees - Apple, Apricot, Cherry (sour, sweet), Crabapple, Loquat, Mayhaw, Nectarine, Olive, Peach, Pear, 
Plum/Prune (all), Quince. 
 
Nut Trees - Almond, Beechnut, Brazil nut, Butternut, Cashew, Chestnut, Chinquapin, Filbert (Hazelnut), Hickory 
nut, Macadamia, Pecan, Pistachio, Walnut (black, English). 
 
Cut the tree close to the soil surface and immediately apply a 50 to 100 % (undiluted) solution of this product to the 
freshly cut surface using application equipment capable of covering the entire cambium. A delay in application could 
result in reduced performance. For enhanced results, cut the tree during period of active growth and full leaf expansion 
and apply this product. 
 
USE PRECAUTIONS: AVOID MAKING CUT STUMP APPLICATIONS WHEN THE ROOTS OF ADJACENT 
DESIRABLE TREES MAY BE GRAFTED TO THE ROOTS OF THE CUT STUMP AS INJURY COULD OCCUR IN 
THE ADJACENT TREES. Some sprouts, stems or trees can share a common root system. Adjacent trees having a 
similar age, height and spacing could be an indicator of a shared root system. Whether grafted or shared, injury is likely 
to occur to adjacent stems or trees when this product is applied to one or more trees sharing a common root system. 
 
Berry and Small Fruit Crops 
[All cultivars, varieties and/or hybrids of Amur River grape; Aronia berry; Bayberry; 
Bearberry; Bilberry; Blackberry (including Andean blackberry, Arctic blackberry, 
Bingleberry, Black satin berry, Boysenberry, Brombeere, California blackberry, Cherokee 
blackberry, Chesterberry, Cheyenne blackberry, Common blackberry, Coryberry, 
Darrowberry, Dewberry, Dirksen thornless berry, Evergreen blackberry, Himalayaberry, 
Hullberry, Lavacaberry, Loganberry, Lowberry, Lucretiaberry, Mammoth blackberry, 
Marionberry, Mora, Mures de ronce, Nectarberry, Northern dewberry, Olallieberry, Oregon 
evergreen berry, Phenomenal berry, Rangeberry, Ravenberry, Rossberry, Shawnee 
blackberry, Southern dewberry, Tayberry, Youngberry, Zarzamora) ; Blueberry (high and 
low bush); Buffaloberry; Che; Chilean guava; Chokerberry; Cloudberry; Cranberry 
(including high bush); Currant (black, buffalo, native, red); Elderberry; European barberry; 
Gooseberry; Grapes; Honeysuckle (edible); Huckleberry; Jostaberry; Juneberry 
(Saskatoon berry); Kiwifruit (fuzzy, hardy); Ligonberry; Maypop; Mountain pepperberry; 
Mulberry; Muntries; Partridgeberry; Phalsa; Pincherry; Raspberry (Black, Red, Wild) ; 
Riberry; Salal; Schisandra berry; Sea buckthorn; Serviceberry; Strawberry] 
 
TYPES OF APPLICATIONS: Those listed in the section "TREE, VINE, AND SHRUB CROPS" 
 
USE PRECAUTIONS: To avoid damage, herbicide sprays must not be allowed to contact desirable vegetation, 
including green shoots, canes or foliage. In the northeast and Great Lakes regions, apply this product in G rape 
vineyards prior to the end of the bloom stage in order to avoid crop injury or apply using a shielded sprayer or wiper 
applicator. USE THIS PRODUCT WITH EXTREME CARE AROUND RASPBERRY AS SERIOUS CROP DAMAGE 
CAN OCCUR IF ANY PART OF THE VINE COMES INTO CONTACT WITH THIS PRODUCT. To the extent consistent 
with applicable law, grower assumes all responsibility for crop losses resulting from misapplication of this product. 
 
USE RESTRICTIONS: Allow a minimum of 3 days between applications of this product and transplanting. Pre-Harvest 
Interval (PHI): Allow a minimum of 30 days between application and harvest of Cranberries or the planting of any crop 
not listed on this label. Pre -Harvest Interval (PHI): Allow a minimum of 14 days between applications and harvest for 
all other Berry and small fruit crops listed here. Do not apply this product using selective equipment in Kiwifruit. 
 
Spot Treatments 
Spot treatment application using a handheld sprayer or other appropriate application equipment listed in the 
“APPLICATION EQUIPMENT AND TECHNIQUES” section of this label may be used to control weeds in Berry and 
small fruit crops listed in this section. 
 
For control of weeds growing in dry ditches (interior and perimeter) of Cranberry production areas, drop water level to 
remove standing water in di tches and apply a 1 to 2% solution of this product with a handheld sprayer to adequately 
wet the vegetation only. Do not spray to the point of runoff. To achieve maximum weed control in dry ditches, apply this 
product within 1 day after water drawdown to ensure application to actively growing weeds and allow a minimum of 2 
days after application before reintroduction of water.

Page 46 of 143 
 
USE RESTRICTIONS: Pre-Harvest Interval (PHI): Allow a minimum of 30 days between spot treatment application and 
harvest of Cranberr ies. Do not apply directly to water. Use nozzles that produce medium to large sized droplets to 
minimize spray drift and avoid crop injury. 
 
Post-harvest Treatments 
This product may be applied for weed control after the harvest of Berries and small fruits listed in this section. 
 
In Cranberry bogs, apply this product after Cranberry vines are dormant (after they have turned red) using a handheld 
sprayer, wiper applicator or any other appropriate application equipment listed in the “ APPLICATION EQUIPMENT 
AND TECHNIQUES” section of this label. With a handheld sprayer, apply a 0. 3 to 0.6% solution of this product to 
adequately wet the vegetation only. Do not spray to the point of runoff. With a handheld boom sprayer, apply 40 to 80 
fluid ounces of this product per acre. 
 
Note: Even though vines appear dormant, contact of the herbicide solution with desirable vegetation may result in 
damage or severe plant injury. Cranberry plants that are directly sprayed may be killed. 
 
USE RESTRICTIONS: Make applications only after Cranberries have been harvested. Do not treat more than 10% of 
the total bog. Allow a minimum of 6 months between post-harvest application and the next harvest of Cranberries. Do 
not make applications by air. Do not apply directly to water. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Citrus Fruit Crops 
[All cultivars, varieties and/or hybrids of Calamondin, Chironja, Citron, Citrus, 
Grapefruit (including Japanese summer) , Kumquat, Lemon, Lime (including 
Australian desert lime, Australian finger lime, Australian round lime, Brown 
river finger lime, Mount white, New Guinea wild, Russell river, Sweet, and 
Tahiti), Mandarin (including Mediterranean, Satsuma); Orange (all); Pummelo; 
Tangelo; Tangerine (Mandarin); Tangor; Uniq Fruit (ugli)] 
 
TYPES OF APPLICATIONS: Those listed in "TREE, VINE, AND SHRUB CROPS" section. 
 
USE INSTRUCTIONS IN FLORIDA AND TEXAS: 
For burndown or control of the weeds listed below, apply the labeled rates of this product in 3 to 30 gallons of water 
per acre. Where weed foliage is dense, use 10 to 30 gallons of water per acre. 
 
For Goatweed Control: Apply 40 to 60 fluid ounces of this product per acre to control Goatweed. Apply in 20 to 30 
gallons of water per acre when plants are actively growing. Use 40 fluid ounces per acre when plants are less than 8 
inches tall and 60 fluid ounces per acre when plants are greater than 8 inches tall. If Goatweed is greater than 8 inches 
tall, the addition of Diuron or Diuron + Bromacil to this product may improve control. It is the pesticide user’s 
responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions 
and limitations and directions for use on all product labels involved in tank-mixing. Users must follow the most restrictive 
directions for use and precautionary statements of each product in the tank-mixture. 
 
For Control of Perennial Weeds: 
Weed Species 
Level of Perennial Weed Control 
Rate of This Product Per Acre 
20 Fl. Oz. 
(0.625 Qt.) 
40 Fl. Oz. 
(1.25 Qt.) 
60.8 Fl. Oz. 
(1.9 Qt.) 
99.2 Fl. Oz. 
(3.1 Qt.) 
Bermudagrass B - PC C 
Guineagrass: 
 Florida Flatwoods 
 Florida Ridge & Texas 
 
- 
 B 
 
B 
C 
 
C 
C 
 
C 
C 
Paragrass B C C C 
Torpedograss S - PC C 
B = Burndown; C = Control; PC = Partial Control; S = Suppression

Page 47 of 143 
 
USE RESTRICTIONS: Pre-Harvest Interval (PHI): Allow a minimum of 1 day between last application and harvest in 
Citrus fruit crops. For Citron groves, apply as directed sprays only. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Miscellaneous Tree Food Crops 
[Cactus (including Dragon Fruit and Prickly Pear), Palm] 
 
TYPES OF APPLICATIONS: Those listed in "TREE, VINE, AND SHRUB CROPS" section. 
 
USE DIRECTIONS AND RESTRICTIONS: Those listed in "TREE, VINE, AND SHRUB CROPS" section. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Nonfood Tree Crops 
[Christmas Trees, Eucalyptus, Pine, Poplar, All Other Nonfood Tree Crops] 
 
TYPES OF APPLICATIONS: Those listed in "TREE, VINE, AND SHRUB CROPS" section. 
 
USE PRECAUTIONS: Avoid contact of spray, drift or mist of this product with foliage or green bark of established 
Christmas trees and other Pine trees. Desirable plants may be protected from the spray solution by using shields or 
coverings made of impermeable materials. 
 
USE RESTRICTIONS: DO NOT APPLY THIS PRODUCT AS A BROADC AST APPLICATION OVER-THE-TOP OF 
PLANTATIONS OR TREE CROPS. 
 
Site Preparation 
This product may be used to control weeds prior to planting nonfood tree crops. Protect non-target plants during site 
preparation applications. 
 
Directed Spray, Spot Treatment, Wiper Applicator 
This product may be applied as a post -directed spray or spot treatment or applied using a wiper applicator around 
established Christmas trees, Eucalyptus, Pine, Poplar, and all other non-food tree crops. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Pome Fruits 
[All cultivars, varieties and/or hybrids of Apple, Azarole, Crabapple, Loquat, 
Mayhaw, Medlar, Pear (including Asian pear), Quince (including Chinese and 
Japanese Quince); Tejocote] 
 
TYPES OF APPLICATIONS: Those listed in "TREE, VINE, AND SHRUB CROPS" section.

Page 48 of 143 
 
USE RESTRICTIONS: Pre-Harvest Interval (PHI): Allow at least 1 day between last application and harvest of 
Pome fruits. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Stone Fruits 
[Apricot, Cherry (Sweet, Tart), Nectarine, Olive, Peach, Plum/Prune (All types), 
Plumcot] 
 
TYPES OF APPLICATIONS: Those listed in "TREE, VINE, AND SHRUB CROPS" section. 
 
USE PRECAUTIONS: Avoid application near trees with recent pruning wounds or other mechanical injury. Apply only 
near trees that have been planted in the orchard for at least 2 years. MAKE SURE THAT NO PART OF A PEACH 
TREE IS CONTACTED WITH OVERSPRAY OR DRIFT OF THIS PRODUCT. 
 
USE RESTRICTIONS: Pre -Harvest Interval (PHI): Allow at least 17 days between application of this product and 
harvest of Stone fruits. In Olive groves, apply as a directed spray only. Remove suckers and low hanging limbs at least 
10 days prior to application. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Tree Nuts 
[Almond, Beechnut, Betelnut, Brazil nut, Butternut, Cashew, Chestnut, 
Chinquapin, Coconut, Filbert (Hazelnut), Hickory nut, Macadamia, Pecan, Pine 
nut, Pistachio, Walnut (Black, English)] 
 
TYPES OF APPLICATIONS: Those listed in "TREE, VINE, AND SHRUB CROPS" section. 
 
USE RESTRICTIONS: Pre-Harvest Interval (PHI): Allow a t least 3 days between last application and harvest of T ree 
nuts, except Coconut. Allow 14 days between application and harvest of Coconut. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac)

Page 49 of 143 
 
Tropical and Subtropical Trees and Fruit Crops 
[Ambarella, Atemoya, Avocado, Banana, Barbados cherry (Acerola), Biriba, 
Blimbe, Breadfruit, Cacao (Cocoa) bean, Canistel, Carambola (Starfruit), 
Cherimoya, Coffee, Custard apple, Dates, Durian, Feijoa, Figs, Governor's plum, 
Guava, llama, Imbe, Imbu, Jabot icaba, Jackfruit, Longan, Lychee, Mamey 
apple, Mango, Mangosteen, Marmaladebox (Genip), Mountain papaya, Noni 
(Indian mulberry), Papaya, Pawpaw, Plantain, Persimmon, Pomegranate, 
Pulasan, Rambutan, Rose apple, Sapodilla, Sapote (Black, Mamey, White), 
Spanish lime, Soursop, Star apple, Sugar apple, Surinam cherry, Tamarind, 
Tea, Ti, Wax jambu] 
 
TYPES OF APPLICATIONS: Those listed in "TREE, VINE, AND SHRUB CROPS" section plus Bananacide. 
 
USE RESTRICTIONS: Pre-Harvest Interval (PHI): Allow a minimum of one day between last application and harvest 
in Banana, Coffee, Guava, Papaya, and Plantain crops. Pre-Harvest Interval (PHI): For a ll other listed tropical or 
subtropical fruit trees listed above, allow a minimum of 14 days between last application and harvest. In Coffee and 
Banana, delay applications for at least 3 months after transplanting to allow the new Coffee or Banana plant to become 
established. 
 
Bananacide (Bananas Only) 
This product may be used to destroy Banana plants infected with the Banana bunchy top virus as well as non-infected 
Banana plants to establish disease free buffers around plantations. 
Remove all fruit s from the plants within the area prior to treatment. Inject 1/25 fluid ounce (1 m l) of this product 
(undiluted) per 2 to 3 inches of pseudostem diameter of the Banana plant to be controlled. Make the injection at least 
1 foot above the ground, except for v ery small plants, which could be injected vertically into the top. Destroy any 
subsequent regrowth. Mechanically destroy all plants and mats (or units) within a 4 foot radius around a treated mat. 
 
To control Banana bunchy top virus, it is critical that the grower follow a strict control program involving monitoring for 
diseased plants, spraying to control the Aphid vector, and destruction of all infected mats (or units). An infected plant 
may not show symptoms of the Banana bunchy top virus for up to 125 days, therefore, it is critical that the entire mat 
(or unit) containing the diseased plant be destroyed immediately. 
 
USE PRECAUTIONS: Following transplant of new Banana plants into treated areas, allow plants to become established 
for 3 months before applying this product to control weeds. 
 
USE RESTRICTIONS: Do not apply more than 0.5 fluid ounce (15 ml) of this product per mat (or unit). Do not harvest 
any fruit or plant material from treated mats (or units) following injection. Do not allow livestock to consume treated 
plant material. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Vine Crops 
[Hops, Passion fruit] 
 
TYPES OF APPLICATIONS: Those listed in "TREE, VINE, AND SHRUB CROPS" section. 
 
Apply this product only when green shoots, canes or foliage are not in the spray zone. 
 
USE RESTRICTIONS: Pre-Harvest Interval (PHI): Allow a minimum of 14 days between last application and harvest 
of these vine crops.

Page 50 of 143 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
VEGETABLE CROPS 
NOTE: THIS SECTION PROVIDES DIRECTIONS FOR USE APPLICABLE TO ALL LISTED VEGETABLE CROPS 
WITHIN THIS SECTION GROUPED ALPHABETICALLY BELOW. SEE THE INDIVIDUAL CROP CATEGORIES FOR 
SPECIFIC INSTRUCTIONS, PRE-HARVEST INTERVALS, PRECAUTIONS AND RESTRICTIONS. 
 
TYPES OF APPLICATIONS: Chemical Fallow, Pre-plant Fallow Beds, Pre-plant, At-Planting, Pre-emergence, Prior to 
Transplanting Vegetables, Hooded Sprayers in Row-Middles, Shielded Sprayers in Row -Middles, Wiper Applications 
in Row-Middles, Dir ected Applications (Non-Bearing Ginseng only), Wiper Applicators ( Carrot, Rutabagas, Sweet 
Potato Only), Post-Harvest. 
 
USE PRECAUTIONS: This product could cause crop injury when applied prior to transplanting or direct seeding crops 
into plastic mulch. Remove residual product from the plastic with a single 0.5 inch application of water either by natural 
rainfall or by irrigation prior to planting. Ensure that the washwater flushes off the plastic mulch and does not enter the 
transplant holes. Application of this product at crop emergence will result in injury or death to emerged seedlings. 
 
Avoid contact of this herbicide with foliage, green shoots or stems, bark, exposed roots (including those emerging from 
the plastic mulch) or fruit of crops as severe crop injury or destruction could result. Transplanted seedlings coming into 
contact with weeds that are still wet with a spray solution of this product could result in significant crop injury. 
 
To avoid severe crop injury, make pre-emergence applications prior to crop emerges from the soil. Apply before seed 
germination in coarse sandy soils to further minimize the risk of crop injury. In crops with vines, make hooded sprayer, 
shielded sprayer, and wiper applications in row middles prior to vine development , otherwise, severe crop injury or 
destruction could result. 
 
USE RESTRICTIONS: Pre-Harvest Interval (PHI): Unless otherwise directed on this label, application using selective 
equipment including wiper applicators and hooded sprayers must be made at least 14 days prior to harvest. Post -
harvest and fallow applications must be made at least 30 days prior to planting of any crop not listed on this label. See 
"SELECTIVE EQUIPMENT" under the "APPLICATION EQUIPMENT AND TECHNIQUES" section of this label for 
additional information. 
 
Brassica Vegetables 
[Broccoli; Chinese broccoli (Gai lon); Broccoli raab (Rapini); Brussels sprouts; Cabbage; 
Chinese cabbage ( Bok choy); Chinese cabbage ( Napa); Chinese mustard cabbage ( Gai 
choy); Cauliflower; Cavalo broccol o; Collards; Kale; Kohlrabi; Mizuna; Mustard greens; 
Mustard spinach; Rape greens] 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
Bulb Vegetables 
[All cultivars, varieties and/or hybrids of Chive (including Chinese); Daylily; Elegans hosta; 
Fritillaria; Garlic (including great -headed, serpent); Kurrat; Leek (including lady’s, wild); 
Onion (including Beltsville bunching, bulb, Chinese, fresh, green, macrostem, pearl, 
potato, tree, Welsh); Shallot]

Page 51 of 143 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
Cucurbit Vegetables and Fruits 
[Chayote (fruit); Chinese waxgourd (Chinese preserving melon); Citron melon; Cucumber; 
Gherkin; Edible gourd (includes Chinese okra, Cucuzza, Hechima, H yotan); Melons (all); 
Momordica spp. (includes Balsam apple, Balsam pear, Bittermelon, Chinese cucumber); 
Muskmelon (includes Cantaloupe, Casaba, Crenshaw melon, Golden pershaw melon, 
Honeydew melon, Honey ball melon, Mango melon, Persian melon, Pineapple melon, Santa 
Claus melon, Snake melon); Pumpkin; Summer squash (includes Crookneck squash, 
Scallop squash, Straightneck squash, Vegetable marrow, Zucchini); Winter squash 
(includes Acorn squash, Butternut squash, Calabaza, Hubbard squash, Spaghetti squash); 
Watermelon] 
USE RESTRICTIONS: 
 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
USE RESTRICTIONS: For Can taloupe, Casaba melon, Crenshaw melon, Cucumber, Gherkin, Gourds, Honey ball 
melon, Honeydew melon, Mango melon, Melons (all), Muskmelon, Persian melon, Pumpkin, Squash (Summer, Winter), 
and Watermelon, allow at least 3 days between application and planting. 
 
Leafy Vegetables 
[Amaranth (Chinese spinach); Arugula (Roquette); Beet greens; Cardoon; Celery; Chinese 
celery; Celtuce; Chaya; Chervil; Edible-leaved chrysanthemum; Garland chrysanthemum; 
Corn salad; Cress (Garden and Upland); Dandelion; Dock (Sorrel); Dokudami; Endive 
(Escarole); Florence fennel; Gow kee; Lettuce (Head and Leaf); Orach; Parsley; Purslane 
(Garden and Winter); Radicchio (Red chicory); Rhubarb; Spinach; New Zealand spinach; 
Vine spinach; Swiss chard; Watercress (Upland); Water spinach] 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
USE RESTRICTIONS: For Watercress, allow at least 3 days between application and seeding. Do not apply this 
product during the period between seeding and emergence. 
 
Fruiting Vegetables 
[All cultivars, varieties and/or hybrids of Eggplant (including African, pea, scarlet); 
Cocona; Garden huckleberry; Goji berry; Groundcherry ( Physalis spp.); Martinynia; 
Naranjilla; Okra; Pepino; Pepper (includes B ell pepper, C hili pepper, C ooking pepper, 
Pimento, Sweet pepper); Roselle; Sunberry; Tomatillo; Tomato] 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac)

Page 52 of 143 
 
 
USE RESTRICTIONS: Allow at least 3 days between applications and planting. For Tomato and Tomatillo, do not apply 
this product using a hooded or shielded sprayer in row middles because of the potential for crop injury. 
 
Legume Vegetables (Succulent or Dried) 
[Bean (Lupinus: includes Grain lupin, Sweet lupin, White lupin, and White sweet lupin) ; 
Bean (Phaseolus: includes Field bean, Kidney bean, Lima bean, Navy bean, Pinto bean, 
Runner bean, Snap bean, Tepary bean, Wax bean) ; Bean (Vigna: includes Adzuki bean, 
Asparagus bean, Blackeyed pea, Catjang, Chinese longbean, Cowpea, Crowder pea, Moth 
bean, Mung bean, Rice bean, Southern pea, Urd bean, Yardlong bean); Broad bean (Fava); 
Chickpea (Garbanzo); Guar; Jackbean; Lablab bean; Lentil; Pea (Pisum: includes Dwarf 
pea, Edible-podded pea, English pea, Field pea, Garden pea, Green pea, Snowpea, Sugar 
snap pea); Pigeon pea; Soybeans (immature seed), Sword bean] 
 
TYPES OF APPLICATION: Those listed in the section "ANNUAL AND PERENNIAL CROPS" plus the following: Spot 
Treatment (Dry varieties only), Pre-harvest (Dry varieties only). 
 
Spot Treatment (Dry Varieties Only) 
This product may be applied as a spot treatment to control troublesome weeds including Canada thistle, Mayweed 
(Dog fennel), Milkweed, and Quackgrass in any dry legume variety listed above. Apply up to 2 0 fluid ounces of this 
product per acre in Dry beans or up to 60 fluid ounces per acre in Dry peas, Lentils, and Chickpeas in 10 to 20 gallons 
of water using ground application equipment or use a 2% solution in a handheld sprayer. For enhanced results, apply 
at or beyond the bud stage of growth. 
 
USE RESTRICTIONS: Pre-Harvest Interval (PHI): Allow at least 7 days between application and harvest . Only one 
spot treatment application may be made per year . Do not combine spot treatment with a pre-harvest broadcast 
application on the same crop area. Allow a minimum of 30 days between application and planting for any crop not listed 
in this label . Do not feed vines and hay from the application area to livestock. Do not apply this product as a spot 
treatment in Cowpeas or Field (feed) peas since these crops are considered grown only as livestock feed. 
 
Pre-harvest (Dry Varieties Only) 
This product may be applied over-the-top of any dry legume variety listed in this section prior to harvest , except 
Cowpeas or Field (feed) peas. Apply up to 20 fluid ounces of this product per acre in Dry beans or up to 60 fluid ounces 
per acre in Dry peas, Lentils, and Chickpeas in 3 to 20 gallons of water per acre at the hard dough stage of the legume 
seed (30% grain moisture or less). 
 
USE RESTRICTIONS: Pre-Harvest Interval (PHI): Allow at least 7 days between application and harvest. Only one 
pre-harvest application may be made per year. Do not combine a pre-harvest application with a spot treatment on the 
same crop area. Allow a minimum of 30 days between application and the planting of any crop not listed on this label. 
Do not feed vines and hay from the application area to livestock. Do not make a pre-harvest application of this product 
in Cowpeas or Field (feed) peas since these crops are considered grown only as livestock feed. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
Root and Tuber Vegetables 
[Arracacha; Arrowroot; Chinese artichoke; Jerusalem artichoke; Beet (Garden); Burdock; 
Canna; Carrot; Cassava (Bitter and Sweet) ; Celeriac; Chayote (Root) ; Chervil (Turnip-
rooted); Chicory; Chufa; Dasheen (Taro); Galangal; Ginger; Ginseng; Horseradish; Leren; 
Kava (Turnip-rooted); Parsley (Turnip-rooted); Parsnip; Potato; Radish; Oriental radish; 
Rutabaga; Salsify; Salsify (Black, Spanish) ; Skirret; Sweet potato; Tanier; Turmeric; 
Turnip; Wasabi; Yacon; Yam bean; True yam] 
 
TYPES OF APPLICATION : Those listed in the section " ANNUAL AND PERENNIAL CROPS" plus the following : 
Directed Application (Non-Bearing Ginseng only), Wiper Applicator (Carrot, Rutabaga, Sweet Potato only).

Page 53 of 143 
 
Directed Application (Non-Bearing Ginseng Only) 
This product may be applied to control weeds in established non-bearing Ginseng using a boom sprayer, CDA, shielded 
sprayer, wiper applicator, handheld or backpack wand, lance or orchard gun. See additional use instructions in the 
“APPLICATION EQUIPMENT AND TECHNIQUES” section of this label. 
 
Control the application so as not to allow any contact of this product with the Ginseng plant. Droplets, mist, foam or 
splatter of the herbicide solution settling onto desirable vegetation could result in discoloration, stunting or destruction. 
 
USE RESTRICTIONS : Pre-Harvest Interval (PHI): Application must be made at least one year prior to harvest of 
Ginseng. 
 
Wiper Applicator (Carrot, Rutabaga, and Sweet Potato Only) 
A 33% solution of this product by volume in water may be applied using a wiper applicator over -the-top of Carrot, 
Rutabaga, and Sweet potato to control tall weeds. See "SELECTIVE EQUIPMENT" under the "APPLICATION 
EQUIPMENT AND TECHNIQUES" section of this label for additional information. 
USE RESTRICTIONS: For Carrot, a maximum of 2 wiper or sponge bar applications may be made at least 60 days 
prior to harvest following the first application and 7 days prior to harvest following the second application or if only one 
wiper application is made over-the-top of the Carrot crop. 
 
For Rutabaga, allow at least 14 days between application and harvest. 
 
For Sweet potato, a maximum of 5 wiper or sponge bar applications may be made at least 14 days between applications 
and a minimum of 7 days prior to harvest. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 41 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
MISCELLANEOUS CROPS 
[Aloe vera, Asparagus, Bamboo shoots, Globe artichoke, Okra, Peanuts, Pineapple, Sugar 
beets] 
 
TYPES OF APPLICATIONS: Those listed in the section "ANNUAL AND PERENNIAL CROPS" plus the following: Spot 
Treatment (Asparagus). 
 
For Sugar beets with Glyphosate resistant and Glyphosate Tolerant Technology, see the “GLYPHOSATE RESISTANT 
AND GLYPHOSATE TOLERANT CROPS” section of this label. 
 
USE PRECAUTIONS: To avoid severe crop injury, make pre -emergence applications before the crop emerges from 
the soil. Apply before seed germination in coarse sandy soils to further minimize the risk of crop injury. In crops with 
vines, apply this product in row middles using a hooded sprayer, shielded sprayer or wiper applicator prior to vine 
development, otherwise, severe crop injury or destruction could result. 
 
Spot Weed Control, Site Preparation 
This product may be applied for spot weed control and for site preparation prior to planting or transplanting crops listed 
in this section. 
 
USE PRECAUTIONS: This product could cause crop injury when applied prior to transplanting or direct seeding crops 
into plastic mulch. Remove residues of this product from the plastic with a single 0.5 inch application of water either by 
natural rainfall or by irrigation prior to planting. Ensure that the washwater flushes off the plastic mulch and does not 
enter transplant holes. 
 
USE RESTRICTIONS: Allow at least 21 days between residue removal and transplanting. Do not apply within 7 days 
prior to emergence of the first Asparagus spears . Do not feed or graze Pineapple forage from within the application 
area. 
 
Spot Treatment (Asparagus) 
This product may be applied immediately after cutting, but prior to the emergence of new spears. 
 
USE RESTRICTIONS: Do not treat more than 10 % of the total field area to be harvested. Pre -Harvest Interval (PHI): 
Do not harvest within 5 days of treatment.

Page 54 of 143 
 
Post-harvest Applications (Asparagus) 
This product may be applied after the last harvest of Asparagus and all spears have been removed. If spears are 
allowed to regrow, delay applications until ferns have developed and apply as a directed or shielded spray in order to 
avoid contact of the spray with ferns, stems or spears. See additional use instructions in the “APPLICATION 
EQUIPMENT AND TECHNIQUES” section of this label. 
 
USE PRECAUTIONS: Direct contact of the spray with the Asparagus could result in serious crop injury. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
GLYPHOSATE RESISTANT AND GLYPHOSATE TOLERANT CROPS 
GLYPHOSATE RESISTANT AND GLYPHOSATE TOLERANT CROPS CONTAIN PATENTED GENE S THAT 
PROVIDE TOLERANCE TO GLYPHOSATE, THE ACTIVE INGREDIENT IN THIS PRODUCT. THIS PRODUCT 
WILL CAUSE SEVERE CROP INJURY OR DESTRUCTION AND YIELD LOSS IF APPLIED TO CROPS THAT ARE 
NOT GLYPHOSATE TOLERANT OR THAT ARE NOT SPECIFICALLY LISTED AND LABELED BELOW . AVOID 
CONTACT OF THIS PRODUCT WITH FOLIAGE , GREEN STEMS OR FRUIT OF CROPS OR ANY DESIRABLE 
PLANTS T HAT DO NOT CONTAIN A GLYPHOSATE TOLERANCE GENE AS SEVERE PLANT INJURY OR 
DESTRUCTION WILL RESULT. For information on other brands of Glyphosate tolerant crops, contact the appropriate 
company representative. 
 
The directions for use in the sections that follow or those published separately on supplemental labeling for this product 
include all applications of this product that may be made onto a specified Glyphosate resistant and Glyphosate tolerant 
crops during the complete cropping season. DO NOT combine these directions for use with the directions for use with 
the same crops listed in the “ANNUAL AND PERENNIAL CROPS” and “PASTURE GRASSES, FORAGE LEGUMES, 
AND RANGELAND” sections of this label which are intended for crops that do not contain a Glyphosate tolerance gene. 
 
Refer to the “ANNUAL WEEDS” and “PERENNIAL WEEDS” found under the “WEEDS CONTROLLED” section for 
application rates for specific weeds. When applied as directed, this product will control the annual and perennial grasses 
and broadleaf weeds listed. Observe the maximum application rates and crop stage timings specified for individual 
Glyphosate resistant and Glyphosate tolerant crops in the sections that follow. 
 
SPRAYER PREPARATION: It is important that sprayer and mixing equipment be clean and free of pesticide residue 
before being used to apply this product over-the-top of Glyphosate resistant and Glyphosate tolerant crops. Follow the 
cleaning procedures specified on the label of the product(s) previously used . THOROUGHLY CLEAN THE SPRAY 
TANK AND ALL LINES AND FILTERS TO ELIMINATE POTENTIAL CONTAMINATION FROM OTHER HERBICIDES 
PRIOR TO MIXING AND APPLYING THIS PRODUCT. 
 
ATTENTION: AVOID DRIFT . USE EXTREME CARE WHEN APPLYING THIS PRODUCT TO PREVENT 
INJURY TO DESIRABLE PLANTS AND CROPS THAT DO NOT CONTAIN A GLYPHOSATE TOLERANCE 
GENE. 
 
Ground Broadcast Application 
Unless otherwise directed, apply this product in 5 to 20 gallons of spray solution per acre . Select proper nozzles and 
spray pressure settings to avoid generating a fine mist . For enhanced results, use flat fan nozzles . Check for even 
distribution of spray droplets. 
 
Aerial Application 
Unless otherwise prohibited, all applications of this product described in this section may be made using aerial 
application equipment where appropriate provided that the applicator complies with the precautions and restrictions 
specified on this label and on all supplemental labeling published separately for this product. 
 
Apply this product in 3 to 15 gallons of water per acre. See “APPLICATION EQUIPMENT AND TECHNIQUES” section 
of this label for important information on aerial application and procedures for avoiding spray drift that could cause injury 
to any vegetation not intended for application. Use of appropriate buffer zones will help prevent injury to adjacent 
vegetation. 
 
See “MIXING” and “APPLICATION EQUIPMENT AND TECHNIQUES ” sections of this label for additional directions 
and restrictions on the application of this product.

Page 55 of 143 
 
Tank-Mixtures 
Tank-mixtures of this product with other herbicides , insecticides, fungicides, micronutrients or foliar fertilizers could 
result in reduced weed control or crop injury when applied over-the-top of Glyphosate resistant and Glyphosate tolerant 
crops. Read the label of all products used in the tank-mixture prior to use to determine the potential for crop injury. It is 
the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the 
applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users must 
follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
If compatibility of the tank-mixture is not known, determine the compatibility of the tank-mix product(s) prior to use. See 
“MIXING” section of this label for more information on tank-mixtures. 
 
[Optional label text: Unless otherwise directed, nonionic surfactant may be added to the spray solution for application 
to Glyphosate resistant and Glyphosate tolerant crops . The addition of certain surfactants to a spray solution of this 
product could result in some crop response including leaf speckling or leaf necrosis due to the surfactant. Refer to the 
individual Glyphosate resistant and Glyphosate tolerant crop sections that follow or to separate supplemental labeling 
for additional precautions or restrictions on the use of surfactants. Refer to the “MIXING” section of this label for 
additional information on the use of surfactants.] 
 
Ammonium sulfate may be added to spray solutions of this product for application to listed Glyphosate resistant and 
Glyphosate tolerant crops. Refer to the “MIXING” section of this label for instructions on the use of ammonium sulfate. 
 
The following use directions are based on a clean start at planting by using a burndown application or tillage to control 
existing weeds before crop emergence. In no-till and stale seedbed systems, apply this product as a pre-plant burndown 
application to control existing weeds prior to crop emergence. Some weeds including Annual m orningglory, Black 
nightshade, Broadleaf signalgrass, Burcucumber, Giant ragweed, Sandbur, Shattercane, Sicklepod, Texas panicum, 
Wild proso millet, and Woolly cupgrass with multiple germination times or suppressed (stunted) weeds might need a 
second application of this product for complete control. Make second application after some regrowth has occurred and 
a minimum of 10 days after a previous application of this product. 
 
Application rates of this product specified on this label for hard- to-control weeds or those specified on separate 
supplemental labeling for this product supersede rates in the “ANNUAL WEEDS” and “PERENNIAL WEEDS” sections 
of this label. 
 
Use Restrictions 
Observe the maximum application rates stated throughout this label . Maximum application rates apply to the use of 
this product combined with the use of any and all other herbicides containing Glyphosate whether applied separately 
or as mixtures . Calculate the application rates (glyphosate acid equivalent) and ensure that the total use of this and 
other glyphosate containing products does not exceed the stated maximum rate. See the “PRODUCT INFORMATION” 
section of this label for more information on maximum application rates. When applying this product as a tank-mixture 
with one or more products , refer to each individual tank -mix product label for restrictions . It is the pesticide user’s 
responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions 
and limitations and directions for use on all product labels involved in tank-mixing. Users must follow the most restrictive 
directions for use and precautionary statements of each product in the tank-mixture. 
 
Alfalfa With Glyphosate Resistant and Glyphosate Tolerant Technology 
The directions for use of this product provided in this section are specific to Alfalfa containing events J101 and J163 
(which includes Alfalfa with Glyphosate resistant and Glyphosate Tolerant Technology). 
TYPES OF APPLICATION: Pre-plant, At-Planting, Pre-emergence, Post-emergence (In-Crop). 
 
Refer to the following table for the maximum application rates of this product: 
 
Maximum Application Rates Per Acre 
Combined total per year for all applications including pre-plant 
during year of establishment 
160 fl. oz. (5 qt.) 
Pre-plant, At-planting, and Pre-emergence single application 40 fl. oz. (1.25 qt.) 
Combined total per year for in-crop applications on newly 
established and established stands 
124 fl. oz. (3.875 qt.) 
 
See the “GLYPHOSATE RESISTANT AND OTHER GLYPHOSATE TOLERANT CROPS” section of this label for 
information regarding the use of this product in Glyphosate resistant and other listed Glyphosate tolerant crops. See 
“PRODUCT INFORMATION” section of this label for more information on maximum application rates. 
 
Pre-plant, At-Planting, Pre-emergence 
This product may be applied before, during or after planting Alfalfa with Glyphosate resistant Technology.

Page 56 of 143 
 
 
Post-emergence (In-crop) 
This product may be applied over -the-top of Alfalfa with Glyphosate resistant Technology (in-crop) from emergence 
until 5 days prior to cutting. To maximize crop yield and quality potential of forage and hay , apply this product after 
weeds have emerged but before Alfalfa growth or regrowth interferes with spray coverage of the target weeds. 
 
Refer to the “ANNUAL WEEDS” and “PERENNIAL WEEDS” found under the “WEEDS CONTROLLED” section of this 
label for application rate for specific weeds . When applied as directed, this product will control listed annual and 
perennial grasses, and broadleaf weeds. This product will also suppress or control the parasitic weed, Dodder (Cuscuta 
spp.) in Alfalfa with Glyphosate resistant Technology. More than one application might be necessary for complete 
control. 
 
Freezing or near freezing conditions or large temperature swings within 5 days after application of this product to Alfalfa 
with Glyphosate resistant Technology could result in a limited, temporary crop response. 
 
New Stand Establishment (Seeding Year): 
Due to the biology and breeding constraints of Alfalfa , up to 10% of the seedlings might not contain a Glyphosate 
resistant gene and will not survive after the first application of this product. To eliminate the undesirable effects of stand 
gaps created by this loss of plants, make a single application of at least 20 fluid ounces of this product per acre at or 
before the 4 trifoliate growth stage. Refer to the following table for application rates during stand establishment (seeding 
year). 
 
New Stand Establishment (Seeding Year) 
Application Rates per Acre 
Before First Cutting: 
From emergence up to 4 trifoliate leaves 20 to 40 fl. oz. (0.625 to 1.25 qt.) 
From 5 trifoliate leaves up to 5 days before first cutting Up to 40 fl. oz. (Up to 1.25 qt.) 
After First Cutting: 
In-crop application, per cutting, up to 5 days before cutting Up to 40 fl. oz. (Up to 1.25 qt.) 
 
TANK-MIXTURES: Up to 40 fluid ounces of this product per acre may be applied post -emergence (in-crop) over-the- 
top of Alfalfa with Glyphosate resistant Technology in the seeding year in a tank-mix with other products (examples are 
listed below) after weeds have emerged but before Alfalfa growth or re-growth interferes with spray coverage of the 
target weeds. 
 
Acetochlor 
Clethodim 
Imazamox 
Imazethapyr 
Quizalofop-p-ethyl 
Sethoxydim 
 
[Optional label text: Imazethapyr or Imazamox applied to seedling Alfalfa could result in a temporary reduction in 
growth. Do not include crop oil concentrate or methylated seed oil in tank-mixtures of this product with Imazethapyr or 
Imazamox as unsatisfactory crop injury could result.] 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
Established Stands (Non-seeding Year): 
Refer to the following table for directions and application rates for in-crop application to established stands of Alfalfa 
(non-seeding year). 
 
Established Stands (Non-Seeding Year) 
Application Rates per Acre 
In-crop applications per cutting up to 5 days before cutting Up to 40 fl. oz. (Up to 1.25 qt.) 
 
TANK-MIXTURES: This product may be applied post-emergence (in-crop) over-the-top of established stands of Alfalfa 
with Glyphosate resistant Technology in tank-mixtures with other herbicides (examples are listed below) according to 
the growing condition of the crop. 
 
Actively Growing Alfalfa: 
For control of emerged annual grasses and broadleaf weeds when Alfalfa is actively growing, this product may be 
applied up to 40 fluid ounces per acre in a tank-mixture with other herbicides (examples are listed below): 
 
Acetochlor 
Clethodim 
Imazamox 
Imazethapyr 
Quizalofop-p-ethyl 
Sethoxydim

Page 57 of 143 
 
[Optional label text: Do not include crop oil concentrate or methylated seed oil in tank -mixtures of this product with 
Imazethapyr or Imazamox as unsatisfactory crop injury could result.] 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
Dormant Alfalfa: 
For control of emerged annual grasses and broadleaf weeds when Alfalfa is dormant , this product may be applied up 
to 40 fluid ounces per acre in a tank-mixture with other herbicides (examples are listed below) when daily temperatures 
remain above freezing: 
 
Imazamox 
Imazethapyr 
Metribuzin 
Pronamide 
Propyzamide 
 
 
[Optional label text: Do not include crop oil concentrate or methylated seed oil in tank -mixtures of this product with 
Imazethapyr or Imazamox as unsatisfactory crop injury could result.] 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
Use Precautions 
Where Alfalfa with Glyphosate resistant Technology is grown with a companion or cover crop or is over seeded with a 
second species, in-crop (over -the-top) application of this product will eliminate the non Glyphosate resistant (non- 
glyphosate tolerant) species. 
 
Use Restrictions 
Do not exceed 4 0 fluid ounces (1.25 qt.) per acre for any single in- crop application of this product . Sequential 
applications of this product must be minimum 7 days apart . The combined total per year for all in-crop applications in 
both newly established (seeding year) and established stands (non-seeding year) must not exceed 124 fluid ounces 
(3.875 qt.) per acre. Do not apply to frozen or snow -covered ground. Remove domestic livestock before application. 
Wait for at least 5 days after application before grazing or cutting or feeding of forage and hay. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
Canola With Glyphosate Tolerant (Spring Varieties)* 
*(Glyphosate resistant Spring Canola is defined as those Canola with Glyphosate resistant Technology varieties that 
are seeded in the Spring and harvested in the Fall and do not enter a Winter dormancy period.) 
 
(Optional: The directions for use of this product provided in this section are specific to Canola containing Event RT73 
(which includes Canola with Glyphosate resistant Technology).) 
Note: For use directions on Canola with TruFlex Technology, refer to that section of this label. DO NOT combine these 
directions for use on Canola with Glyphosate resistant Technology with the directions for use on Canola with TruFlex 
Technology. 
 
TYPES OF APPLICATION: Pre -plant, At-Planting, Pre-emergence, Post -emergence (In-Crop), Post -emergence (In- 
Crop) in Hybrid Seed Production Only. 
 
Refer to the following table for the maximum application rates for this product with Spring varieties of Canola with 
Glyphosate resistant Technology: 
 
Maximum Application Rate per Acre 
Total for all Pre-plant, At-Planting, Pre-emergence applications 40 fl. oz. (1.25 qt.) 
Total for all in-crop applications from emergence to 6 leaf stage 20 fl. oz. (0.625 qt.) 
 
See the “GLYPHOSATE RESISTANT AND GLYPHOSATE TOLERANT CROPS” section of this label for information 
regarding the use of this product in Glyphosate resistant and other listed Glyphosate tolerant crops. See the “PRODUCT 
INFORMATION” section of this label for more information on maximum application rates.

Page 58 of 143 
 
 
Pre-plant, At-Planting, Pre-emergence 
This product may be applied before, during or after planting Spring Canola with Glyphosate resistant Technology. 
 
USE RESTRICTIONS: Maximum quantity of this product that may be applied for all pre- plant, at-planting, and pre-
emergence applications combined is 40 fluid ounces (1.25 qt.) per acre per year. 
 
Post-emergence (In-crop) 
This product may be applied post -emergence (in-crop) to Spring varieties of Canola with Glyphosate resistant 
Technology from emergence through the 6 leaf stage of development unless otherwise directed. Application made 
during bolting or flowering could result in crop injury and yield loss . To maximize yield potential, eliminate competing 
weeds early. 
 
SINGLE APPLICATION: Apply 10 to 15 fluid ounces of this product per acre no later than the 6 leaf stage to control 
annual weeds. Avoid overlapping applications as this could result in temporary yellowing, delayed flowering and/or 
growth reduction. Similar crop injury could result when more than 10 fluid ounces per acre are applied after the 4 leaf 
stage. 
 
SEQUENTIAL APPLICATION: Ap ply 10 fluid ounces of this product per acre to 1 to 3 leaf Canola followed by a 
sequential application at a minimum interval of 10 days but no later than the 6 leaf stage. Sequential application works 
enhanced for control of early emerging annual and perennial weeds including Canada thistle and Quackgrass or 
whenever more than one application is needed for adequate weed control. 
 
USE RESTRICTIONS: No more than two in- crop ( over-the-top) broadcast applications may be made from crop 
emergence through the 6 leaf stage of development and the total in-crop application must not exceed 20 fluid ounces 
(0.625 qt.) of this product per acre. Pre-Harvest Interval (PHI): Allow a minimum of 60 days between application and 
Canola harvest. 
 
Post-emergence (In-crop) in Hybrid Seed Production Only 
THIS POST-EMERGENCE APPLICATION IS FOR USE ONLY IN HYBRID CANOLA SEED PRODUCTION OF BOTH 
SPRING AND WINTER VARIETIES. DO NOT MAKE THIS APPLICATION ON CANOLA GROWN FOR FOOD OR 
FEED. 
 
This product may be applied at a rate of between 10 and 20 fluid ounces per acre from emergence until pollination is 
complete or near completion for the control of non-glyphosate tolerant Canola pollen parental line(s) in hybrid Canola 
seed production fields containing both a Canola with Glyphosa te resistant Technology Iine(s) and a non-glyphosate 
tolerant line(s). Sequential applications may be made for the control of non-glyphosate tolerant pollen parental lines up 
to a maximum total application rate of 20 fluid ounces per acre. 
 
USE RESTRICTIONS: Allow a minimum of 5 days between sequential applications. Maximum total application rate of 
this product for ALL post-emergence (in-crop) applications in hybrid Canola seed production fields including application 
for weed control and control of non-glyphosate tolerant Canola is 20 fluid ounces (0.625 qt.) per acre. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
Canola with Glyphosate Resistant Technology (Winter Varieties)* 
*(Glyphosate resistant Winter Canola is defined as those Canola with Glyphosate resistant Technology varieties that 
are seeded in early Fall and harvested the following Spring or Summer. Winter Canola varieties are intended to enter 
a cold period dormancy in the Winter.) 
 
(Optional: The directions for use of this product provided in this section are specific to Canola containing Event RT73 
(which includes Canola with Glyphosate resistant Technology).) 
 
Note: For use directions on Canola with TruFlex Technology, refer to that section of this label. DO NOT combine these 
directions for use on Canola with Glyphosate resistant Technology with the directions for use on Canola with TruFlex 
Technology. 
 
TYPES OF APPLICATION: Pre-plant, At-Planting, Pre-emergence, Post-emergence (In-Crop).

Page 59 of 143 
 
Refer to th e following table for the maximum application rates of this product with Winter varieties of Canola with 
Glyphosate resistant Technology. 
 
Maximum Application Rate per Acre 
Total for all Pre-plant, At-Planting, Pre-emergence applications 40 fl. oz. (1.25 qt.) 
Total for all in-crop applications from emergence to canopy closure 
or prior to bolting in the Spring 
40 fl. oz. (1.25 qt.) 
 
See the “GLYPHOSATE RESISTANT AND GLYPHOSATE TOLERANT CROPS” section of this label for information 
regarding the use of this product in Glyphosate resistant crops. See the “PRODUCT INFORMATION” section of this 
label for more information on maximum application rates. 
 
Pre-plant, At-Planting, Pre-emergence 
This product may be applied before, during or after planting Glyphosate resistant Winter Canola. 
 
Post-emergence (In-Crop) 
This product may be applied to Winter varieties of Canola with Glyphosate resistant Technology from emergence to 
canopy closure in the Fall and prior to bolting in the Spring. Application made during or after bolting could result in crop 
injury and yield loss. To maximize yield potential, eliminate competing weeds early. 
 
Some weeds with multiple germination times or suppressed (stunted) weeds or weeds that have overwintered might 
require a sequential application of this product for control . Make the second application after some regrowth has 
occurred and minimum 60 days after the initial application of this product. 
 
SINGLE APPLICATION: Apply 15 to 20 fluid ounces of this product per acre in the F all when weeds are small and 
actively growing. Use the higher rate within this range when weed densities are high when weeds have overwintered 
or when weeds become large and well established. Application of more than 15 fluid ounces per acre prior to the 6 leaf 
stage could result in reduced crop growt h in the Fall. Avoid spray overlaps as this could result in temporary yellowing 
and/or growth reduction. 
 
SEQUENTIAL APPLICATION: Apply 10 to 20 fluid ounces of this product per acre to 2 leaf or larger Canola in the Fall 
followed by a sequential application at the same rate and at a minimum interval of 60 days but before bolting in the 
Spring. Sequential application works enhanced for control of early emerging annual weeds and winter emerging weeds 
including Downy brome, J ointed goatgrass, and Ryegrass and for weeds that have overwintered. This product will 
control or suppress most perennial weeds . For some perennial weeds, a sequential application might be required to 
reduce competition with the crop. 
 
USE RESTRICTIONS: No more than two over-the-top broadcast applications may be made from crop emergence up 
to the onset of bolting and the total in- crop application must not exceed 40 fluid ounces (1.25 qt.) of this product per 
acre. Pre-Harvest Interval (PHI): Allow a minimum of 60 days between application and harvest of Canola grain. No 
waiting period is required between application and open grazing of livestock. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
Canola with TruFlex Technology (Spring Varieties)* 
*(Canola with TruFlex Technology is defined as those varieties of Canola with TruFlex Technology that are seeded in 
the Spring and harvested in the Fall and do not enter a period of Winter dormancy.) 
 
(Optional: The directions for use of this product provided in this section are specific to canola containing Event MON 
88302 (which includes Canola with TruFlex Technology).) 
The directions for use provided in this section are specific to and may only be used with variet ies designated 
as Canola with TruFlex Technology. 
 
Applications described on this label made over -the-top of Canola that is not designated as Canola with TruFlex 
Technology could cause serious crop injury and reduced yields. DO NOT combine these directions for use with those 
in the “CANOLA WITH GLYPHOSATE RESISTANT TECHNOLOGY” sections of this label or with any other directions 
for use on Canola on labeling for this or any other Glyphosate-containing product.

Page 60 of 143 
 
Drift of this product from an application made to Canola with TruFlex Technology onto adjacent fields of Canola with 
Glyphosate resistant Technology could cause extensive crop injury. 
 
TYPES OF APPLICATION : Pre-plant, At-Planting, Pre -emergence, Post-emergence (In-Crop), Post-emergence (In-
Crop) in Hybrid Seed Production Only. 
 
Refer to the following table for the maximum application rates of this product with Spring varieties of TruFlex Canola 
with Glyphosate resistant Technology. 
 
Maximum Application Rate per Acre 
Total for all Pre-plant, At-Planting, Pre-emergence applications 99.2 fl. oz. (3.1 qt.) 
Total for all in-crop applications from emergence through harvest 40 fl. oz. (1.25 qt.) 
Total for all in-crop applications from emergence through the 6 leaf stage 40 fl. oz. (1.25 qt.) 
Total for all in-crop applications from 6 leaf stage through first flower 20 fl. oz. (0.625 qt.) 
 
See the “GLYPHOSATE RESISTANT AND GLYPHOSATE TOLERANT CROPS” section of this label for information 
regarding the use of this product in Glyphosate resistant and other listed Glyphosate tolerant crops. See the “PRODUCT 
INFORMATION” section of this label for more information on maximum application rates. 
 
Pre-plant, At-Planting, Pre-emergence 
Up to 99.2 fluid ounces of this product may be applied before, during or after planting Spring varieties of Canola with 
TruFlex Technology. 
 
Post-emergence (In-crop) 
This product may be applied post -emergence (in-crop) to spring varieties of Canola with TruFlex Technology from 
emergence through the first flower stage of development. To maximize yield potential, eliminate competing weeds 
early. 
 
For control of Canada thistle and Morningglory, apply 40 fluid ounces of this product per acre no later than the 6 leaf 
stage of Canola development. For control of Wild buckwheat over 2 inches in size, make sequential applications of 20 
fluid ounces followed by 20 fluid ounces of this product per acre. For control of other annual weeds, apply up to 40 fluid 
ounces of this product per acre no later than the 6 leaf stage or up to 20 fluid ounces after the 6 leaf stage through first 
flower. 
 
USE RESTRICTIONS: No more than two in- crop (over -the-top) broadcast applications may be made from crop 
emergence through the first flower stage of Canola development and the total in-crop application must not exceed 40 
fluid ounces (1.25 qt.) of this product per acre. No more than 20 fluid ounces (0.625 qt.) of this product may be applied 
in-crop after the 6 leaf stage. 
 
Post-emergence (In-crop) in Hybrid Seed Production Only 
THIS POST-EMERGENCE APPLICATION IS FOR USE ONLY IN HYBRID CANOLA SEED PRODUCTION OF BOTH 
SPRING AND WINTER VARIETIES. DO NOT MAKE THIS APPLICATION ON CANOLA GROWN FOR FOOD OR 
FEED. 
 
This product may be applied at a rate of between 10 and 20 fluid ounces per acre from emergence until pollination is 
complete or near completion for the control of non-glyphosate-tolerant Canola pollen parental line(s) in hybrid Canola 
seed production fields containing both Canola with Glyphosate resistant and Technology line(s) and non-glyphosate 
tolerant line(s). Sequential applications may be made for the control of non-glyphosate tolerant pollen parental lines up 
to a maximum total application rate of 20 fluid ounces per acre. 
 
USE RESTRICTIONS: Allow a minimum of 5 days between sequential applications. Maximum total application rate of 
this product for all post-emergence (in-crop) applications in hybrid Canola seed production fields, including application 
for weed control and control of non-glyphosate tolerant Canola is 20 fluid ounces (0.625 qt.) per acre. 
 
Field Corn Hybrids with Glyphosate Resistant Technology* 
*(Field corn hybrids with Glyphosate resistant Technology include Glyphosate resistant Corn and Field corn seed 
products displaying the Glyphosate resistant Technology logo.) 
 
(Optional: The directions for use of this product provided in this section are specific to Field corn hybrids containing 
Event NK603, MON 88017 or MON 87411 (which includes Field corn hybrids with Glyphosate resistant Technology).)

Page 61 of 143 
 
TYPES OF APPLICATION: Pre-plant, At-Planting, Pre-emergence, Post-emergence (In-Crop), Spot Treatment, Pre-
harvest, Post -harvest, Post -emergence (In -Crop) for Tassel Control in Glyphosate resistant Hybridization Systems 
Only. 
 
For use directions on Sweet corn hybrids that contain Glyphosate resistant Technology, see “SWEET CORN HYBRIDS 
WITH GLYPHOSATE RESISTANT TECHNOLOGY” section of this label. 
 
Refer to the following table for maximum application rates of this product with Field corn hybrids with Glyphosate 
resistant Technology: 
 
Maximum Application Rate per Acre 
Combined total per year for all applications 160 fl. oz. (5 qt.) 
Total for all Pre-plant, At-Planting, Pre-emergence applications 99.2 fl. oz. (3.1 qt.) 
Maximum single in-crop application rate up to 48 inch Corn 30 fl. oz. (0.94 qt.) 
Total for all in-crop applications from emergence through 48 inch Corn 60 fl. oz. (1.875 qt.) 
Maximum pre-harvest application rate after maximum kernel fill is complete and the crop 
is physiologically mature (black layer formation) until 7 days before harvest* 
20 fl. oz. (0.625 qt.) 
* See “USE RESTRICTIONS” under the “PRE-HARVEST APPLICATIONS” section below. 
 
See “GLYPHOSATE RESISTANT AND GLYPHOSATE TOLERANT CROPS ” section of this label for information 
regarding the use of this product in Glyphosate resistant and other listed Glyphosate tolerant crops . See “PRODUCT 
INFORMATION” section of this label for more information on maximum application rates. 
 
USE PRECAUTIONS: The use of the in- crop (over-the-top) rates described in this section on other than Field corn 
hybrids with Glyphosate resistant Technology could cause crop injury and reduced yields. 
 
Pre-plant, At-Planting, Pre-emergence 
This product may be applied alone or in a tank -mixture before, during or after planting Field corn hybrids with 
Glyphosate resistant Technology. 
 
TANK-MIXTURES: This product may be tank-mixed with other herbicides (examples are listed below) for use before, 
during or after planting Field corn hybrids with Glyphosate resistant Technology. Apply these tank-mixtures in 10 to 20 
gallons of water or 10 to 60 gallons of nitrogen solution per acre. 
 
Acetochlor 
Atrazine 
Bicyclopyrone 
Carfentrazone-ethyl 
Clopyralid 
2,4-D 
Dicamba 
Diflufenzopyr 
Dimethenamid 
Dimethenamid-p 
Flufenacet 
Flumetsulam 
Flumiclorac pentyl ester 
Fluthiacet-methyl 
Isoxaflutole 
Linuron 
Mesotrione 
Metolachlor 
Metribuzin 
Pendimethalin 
Pyroxasulfone 
Rimsulfuron 
S-Metolachlor 
Saflufenacil 
Tembotrione 
Thiencarbazone-methyl 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: Maximum quantity of this produc t that may be applied for all pre- plant, at-planting, and pre-
emergence applications combined is 99.2 fluid ounces (3.1 qt.) per acre per year. Application of 2,4-D or Dicamba must 
be made at least 7 days prior to planting Corn. 
 
Note: For maximum weed control, make a post -emergence (in-crop) application of this product following the use of a 
pre-emergence residual product listed above. 
 
Post-emergence Applications (In-Crop) 
This product may be applied alone or in a tank -mix over -the-top of Field corn hybrids with Glyphosate resistant 
Technology from emergence through the V8 stage (8 leaves with collars) or until Corn plant height reaches 30 inches 
(free standing) whichever comes first unless otherwise directed. Use drop nozzles for optimum spray coverage and 
weed control when Corn plant height is 24 to 30 inches. When Corn plants are 30 to 48 inches tall (free standing), apply 
this product using only ground application equipment fitted with drop nozzles aligned to avoid spraying into the whorls 
of the Corn plants. 
 
Maximum single in-crop application rate of this product up to 48 inch Field corn is 30 fluid ounces per acre . Total in- 
crop application of this product from Corn plant emergence through 48 inches in height must not exceed 60 fluid ounces 
per acre.

Page 62 of 143 
 
 
When applied as directed , this product will control annual grasses and broadleaf weeds listed on this label. Many 
perennial grasses and broadleaf weeds will be controlled or suppressed with one or more applications of this product. 
Make a post-emergence application at the rate of 15 to 20 fluid ounces of this product per acre before weeds exceed 
4 inches in height (before they become competitive with the crop). Repeat this application before new flushes of weeds 
exceed 4 inches in height. 
 
TANK-MIXTURES: This product may be tank -mixed with other herbicides (examples are listed below) for post -
emergence (in-crop) applications to Field corn hybrids with Glyphosate resistant Technology. 
 
Acetochlor 
Atrazine 
Bicyclopyrone 
Carfentrazone-ethyl 
Clopyralid 
2,4-D 
Dicamba 
Diflufenzopyr 
Flumetsulam 
Flumiclorac pentyl ester 
Halosulfuron-methyl 
Isoxaflutole 
Mesotrione 
Metolachlor 
Metribuzin 
Nicosulfuron 
Pendimethalin 
Rimsulfuron 
S-Metolachlor 
Tembotrione 
Thiencarbazone-methyl 
Thifensulfuron-methyl 
Topramezone 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: Pre-Harvest Interval (PHI): Allow a minimum of 10 days between in-crop applications of this 
product. Allow a minimum of 50 days between application of this product and harvest of Corn forage or grain. 
 
Pre-harvest Applications 
Apply up to 20 fluid ounces of this product per acre for annual and perennial weed control prior to harvest when kernel 
fill is complete and Corn is physiologically mature (black layer formed) and grain moisture is 35% or less. 
 
USE RESTRICTIONS: A pre -harvest application may be made only if the combined total of previously applied over -
the-top or drop nozzle applications does not exceed 40 fluid ounces (1.25 qt.) of this product per acre. Pre -Harvest 
Interval (PHI): Allow a minimum of 7 days between application and harvest or feeding of Corn stover or grain. 
 
Post-harvest Applications 
This product may be applied for weed control after crop harvest . Higher rates might be required for control of large 
weeds that were growing in the field at the time of harvest. Tank-mixtures with 2,4-D or Dicamba may be used. It is the 
pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the 
applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users must 
follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: Pre-Harvest Interval (PHI): Allow a minimum of 7 days between application and harvest or the 
feeding of vegetation within the application area. Application must be made a minimum of 30 days prior to the planting 
of any crop not listed on this label. 
 
Post-emergence (In -crop) fo r Tassel Control in Glyphosate Resistant Hybridization 
Systems (RHS) Only 
THIS APPLICATION IS FOR USE ONLY IN SEED PRODUCTION OF CORN HYBRIDS USING THE GLYPHOSATE 
RESISTANT HYBRIDIZATION SYSTEM (RHS). DO NOT MAKE THIS APPLICATION ON CORN GROWN FOR FOOD 
OR FEED. 
 
The RHS designation indicates that the Corn contains a proprietary gene technology that allows for tassel only 
susceptibility to this product. Use of this product on Corn hybrids or inbreds that are not designated as RHS or as Corn 
containing Glyphosate resistant Technology could result in severe crop injury and yield loss. 
 
This product may be applied at rates of between 1 0 and 30 fluid ounces per acre as an over -the-top broadcast 
application for tassel control in RHS-based seed Corn production fields from the V8 stage until either the V13 stage or 
100 GDU (Growing Degree Units) before flowering. 
 
USE RESTRICTIONS: Make no more than two applications of this product for tassel control. The maximum total 
application rate of this product for tassel control is 60 fluid ounces (1.875 qt.). The maximum combined total amount of 
this product that may be applied per year for both weed control and tassel control is 160 fluid ounces (5 qt.) per acre.

Page 63 of 143 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
Sweet Corn Hybrids with Glyphosate Resistant Technology* 
*(Sweet corn hybrids with Glyphosate resistant Technology include Glyphosate resistant Sweet Corn and Sweet corn 
seed products displaying the Glyphosate resistant Technology logo.) 
 
(Optional: The directions for use of this product provided in this section are specific to Sweet corn hybrids containing 
Event MON 88017 (which includes Sweet corn hybrids with Glyphosate resistant Technology).) 
The directions for use in this section refer only to Sweet corn hybrids with Glyphosate resistant Technology. [Alternative 
text: The directions for use in this section apply only to use on Glyphosate resistant Sweet Corn]. For use directions on 
Field Corn hybrids that contain Glyphosate resistant Technology, see the "FIELD CORN HYBRIDS WITH 
GLYPHOSATE RESISTANT TECHNOLOGY" section of this label. 
 
TYPES OF APPLICATION: Pre-plant, At-Planting, Pre-emergence, Post-emergence (In-Crop). 
 
Refer to the following table for maximum application rates of this product with Sweet corn hybrids with Glyphosate 
resistant Technology. [Alternative text: Refer to the following table for maximum application rates of this product with 
Glyphosate resistant sweet corn.] 
Maximum Application Rate per Acre 
Combined total per year for all applications 160 fl. oz. (5 qt.) 
Total for all Pre-plant, At-Planting, Pre-emergence applications 99.2 fl. oz. (3.1 qt.) 
Maximum single in-crop application rate up to 48 inch Sweet corn 40 fl. oz. (1.25 qt.) 
Total of all in-crop applications from emergence through 48 inch Sweet corn 124 fl. oz. (3.875 qt.) 
 
See the “GLYPHOSATE RESISTANT AND GLYPHOSATE TOLERANT CROPS” section of this label for information 
regarding the use of this product in Glyphosate resistant and other listed Glyphosate tolerant crops. See “PRODUCT 
INFORMATION” section of this label for more information on maximum application rates. 
 
USE PRECAUTIONS: The use of the in-crop (over-the-top) applications described in this section on other than Sweet 
corn hybrids with Glyphosate resistant Technology co uld cause crop injury and reduced yields . [Alternative Text: The 
use of the in-crop (over-the-top) applications described in this section on other than Glyphosate resistant Sweet corn 
could cause crop injury and reduced yields.] 
 
Pre-plant, At-Planting, Pre-emergence 
This product may be applied alone or in a tank -mixture before, during or after planting Sweet corn hybrids with 
Glyphosate resistant Technology. [Alternative Text: This product may be applied alone or in tank-mixture before, during 
or after planting Glyphosate resistant Sweet corn.] 
 
TANK-MIXTURES: This product may be tank -mixed with the residual herbicides (examples are listed below) for 
maximum weed control. Apply these tank-mixtures in 10 to 20 gallons of water or in 10 to 60 gallons of nitrogen solution 
per acre. 
 
Acetochlor 
Atrazine 
Bicyclopyrone 
Carfentrazone-ethyl 
Clopyralid 
2,4-D 
Dicamba 
Diflufenzopyr 
Dimethenamid 
Dimethenamid-p 
Flufenacet 
Flumetsulam 
Flumiclorac pentyl ester 
Fluthiacet-methyl 
Isoxaflutole 
Linuron 
Mesotrione 
Metolachlor 
Metribuzin 
Pendimethalin 
Pyroxasulfone 
Rimsulfuron 
S-Metolachlor 
Saflufenacil 
Tembotrione 
Thiencarbazone-methyl 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture.

Page 64 of 143 
 
USE RESTRICTIONS: Maximum quantity of this product that may be applied for all pre- plant, at-planting, and pre-
emergence applications combined is 99.2 fluid ounces (3.1 qt.) per acre per year. 
 
Post-emergence Applications (In-Crop) 
Apply this product alone or in a tank-mixture over-the-top of Sweet corn hybrids with Glyphosate resistant Technology 
[Alternative Text: Glyphosate resistant Sweet corn] from emergence through the V8 stage (8 leaves with collars) or 
until Sweet corn plant height reaches 30 inches (free standing) whichever comes first. Use drop nozzles for optimum 
spray coverage and weed control when Sweet corn plant height is 24 to 30 inches. When Sweet corn plants are 30 to 
48 inches tall (free standing), apply this produc t using only ground application equipment fitted with drop nozzles 
aligned to avoid spraying into the whorls of the Sweet corn plants. Avoid spraying if the crop has reached the 
reproductive stage. Maximum single in-crop application rate of this product up to 48 inch Sweet corn is 40 fluid ounces 
(1.25 qt.) per acre. Total in-crop application of this product from emergence through 48 inches in height must not exceed 
124 fluid ounces (3.875 qt.) per acre per growing year. 
 
When applied as directed, this product will control annual grasses and broadleaf weeds listed on this label. Many 
perennial grasses and broadleaf weeds will be controlled or suppressed with one or more applications of this product. 
Apply 15 to 20 fluid ounces of this product per acre before weeds exceed 4 inches in height or before they become 
competitive with the crop. If new flushes of weeds occur, a sequential application of 15 to 20 fluid ounces per acre may 
be made before weeds exceed 4 inches in height. 
 
TANK-MIXTURES: This product may be tank -mixed with other herbicides (examples are listed below) for post -
emergence (in-crop) applications to Sweet corn with Glyphosate resistant Technology [Alternative Text: Glyphosate 
resistant Sweet corn]. 
 
Atrazine 
Carfentrazone-ethyl 
Mesotrione 
Tembotrione 
Topramezone 
 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: Allow a minimum of 10 days between in-crop applications of this product. Do not apply Atrazine 
in a tank-mix with this product when Sweet corn plants are greater than 12 inches tall. Pre-Harvest Interval (PHI): Allow 
a minimum of 30 days between application of this product and harvest of Sweet corn forage or grain. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
Field Corn Hybrids with Agrisure GT Technology 
(Optional: The directions for use of this product provided in this section are specific to Field corn hybrids containing 
Event GA21 (which includes Field corn hybrids with Agrisure GT Technology).) 
 
TYPES OF APPLICATION: Preplant , At-Planting, Pre-emergence, Post-emergence (In-crop), Spot Treatment, Pre-
harvest, Post-Harvest 
 
Refer to the following table for maximum application rates of this product with field corn hybrids with Agrisure GT 
Technology. 
 
Maximum Application Rate per Acre 
Combined total per year for all applications 160 fl. oz. (5 qt.) 
Total for all Pre-plant, At-Planting, Pre-emergence applications 99.2 fl. oz. (3.1 qt.) 
Maximum single in-crop application rate up to 48 inch Corn 20 fl. oz. (0.625 qt.) 
Total of all in-crop applications from emergence through 48 inch Corn 40 fl. oz. (1.25 qt.) 
Maximum Pre-harvest application rate after maximum kernel fill is complete and the crop is 
physiologically mature (black layer formation) until 7 days before harvest* 
20 fl. oz. (0.625 qt.) 
*See “USE RESTRICTIONS” under the “PRE-HARVEST APPLICATIONS” section below.

Page 65 of 143 
 
See the "GLYPHOSATE RESISTANT AND GLYPHOSATE TOLERANT CROPS" section of this label for information 
regarding the use of this product in Glyphosate resistant and other listed glyphosate tolerant crops. See the "PRODUCT 
INFORMATION" section of this label for more information on maximum application rates. 
USE PRECAUTIONS: The use of the in- crop (over-the-top) rates described in this section on other than Field corn 
hybrids with Agrisure GT Technology could cause crop injury and reduced yields. 
Pre-plant, At-Planting, Pre-emergence 
This product may be applied alone or in a tank-mixture before, during or after planting Field corn hybrids with Agrisure 
GT Technology. 
 
TANK-MIXTURES: This product may be tank -mixed with the following herbicides (examples are listed below). Apply 
these tank-mixtures in 10 to 20 gallons of water or 10 to 60 gallons of nitrogen solution per acre. 
Acetochlor 
Atrazine 
Bicyclopyrone 
Carfentrazone-ethyl 
Clopyralid 
2,4-D 
Dicamba 
Diflufenzopyr 
Dimethenamid 
Dimethenamid-p 
Flufenacet 
Flumetsulam 
Flumiclorac pentyl ester 
Fluthiacet-methyl 
Isoxaflutole 
Linuron 
Mesotrione 
Metolachlor 
Metribuzin 
Pendimethalin 
Pyroxasulfone 
Rimsulfuron 
Saflufenacil 
Tembotrione 
Thiencarbazone-methyl 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant, at -planting and 
preemergence applications combined is 99.2 fluid ounces (3.1 qt.) per acre per year. Application of 2,4-D or Dicamba 
must be made a minimum of 7 days prior to planting Corn. 
Note: For maximum weed control, make a post -emergence (in-crop) application of this product following the use of a 
pre-emergence residual product listed above. 
Post-emergence Applications (In-crop) 
This product may be applied alone or in a tank -mix over-the-top of F ield corn hybrids with Agrisure GT Technology 
from emergence through the VB stage (8 leaves with collars) or until Corn plant height reaches 30 inches (free standing) 
whichever comes first unless otherwise directed. Maximum single in- crop application rate of this product is 20 fluid 
ounces (0.625 qt.) per acre. Total in-crop application of this product from corn plant emergence through V8 stage or 30 
inches in height must not exceed 40 fluid ounces (1.25 qt.) per acre. 
 
When applied as directed, this produc t will control annual grasses and broadleaf weeds listed on this label. Many 
perennial grasses and broadleaf weeds will be controlled or suppressed with one or more applications of this product. 
Make a postemergence application of 15 to 20 fluid ounces of this product per acre before weeds exceed 4 inches in 
height (before they become competitive with the crop). Repeat this application before new flushes of weeds exceed 4 
inches in height. 
TANK-MIXTURES: This product may be tank-mixed with the following herbicides. 
Acetochlor 
Atrazine 
Bicyclopyrone 
Carfentrazone-ethyl 
Clopyralid 
2,4-D 
Dicamba 
Diflufenzopyr 
Flumetsulam 
Flumiclorac pentyl ester 
Halosulfuron-methyl 
Isoxaflutole 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: Allow a minimum of 10 days between in -crop applications of this product. Allow a minimum of 
50 days between application of this product and harvest of Corn forage or grain.

Page 66 of 143 
 
 
Note: In-crop applications made alone or with the addition of other crop chemical products may result in crop response. 
Please contact the seed trait provider for any questions. 
 
Pre-harvest Applications 
Up to 20 fluid ounces of this product per acre may be applied for annual and perennial weed control prior to harvest 
when kernel fill is complete and the corn is physiologically mature (black layer formed) and grain moisture is 35% or less. 
 
USE RESTRICTIONS: A pre -harvest application may be made only if the combined total of previously applied over -
the-top or drop nozzle applications does not exceed 40 fluid ounces (1.25 qt.) of this product per acre. Allow a minimum 
of 7 days between application and harvest or feeding of Corn stover or grain. 
 
Post-harvest Applications 
This product may be applied for weed control after crop harvest. Higher rates might be needed for control of large 
weeds that were growing in the field at the time of harvest. Tank-mixtures with 2,4-D or Dicamba may be used. It is the 
pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the 
applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users must 
follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
USE RESTRICTIONS: Allow a minimum of 7 days between application and harvest or the feeding of vegetation within 
the application area. Application must be made a minimum of 30 days prior to the planting of any crop not listed on this 
label. 
Cotton With Glyphosate Resistant Technology 
(Optional: The directions for use of this product provided in this section are specific to cotton containing Event MON 
1445 (which includes Cotton with Glyphosate resistant Technology).) 
TYPES OF APPLICATION: Pre -plant, At-Planting, Pre-emergence, Post -emergence (In-Crop), Selective Equipment 
(In-Crop), Pre-harvest. 
 
Refer to the following table for maximum application rates of this product with Cotton with Glyphosate resistant 
Technology. 
 
Maximum Application Rate per Acre 
Combined total per year for all applications 160 fl. oz. (5 qt.) 
Total of all Pre-plant, At-Planting, Pre-emergence applications 99.2 fl. oz. (3.1 qt.) 
Total for all in-crop applications from cracking to layby 80 fl. oz. (2.5 qt.) 
Maximum pre-harvest application rate 40 fl. oz. (1.25 qt.) 
Combined total of all in-crop applications from emergence through harvest 120 fl. oz. (3.75 qt.) 
 
See the “GLYPHOSATE RESISTANT AND GLYPHOSATE TOLERANT CROPS” section of this label for information 
regarding the use of this product in Glyphosate resistant and other Glyphosate tolerant crops. See “PRODUCT 
INFORMATION” section of this label for more information on maximum application rates. 
 
Pre-plant, At-Planting, Pre-emergence 
This product may be applied before, during or after planting Cotton with Glyphosate resistant Technology. 
 
TANK-MIXTURES: This product may be tank -mixed with 2, 4-D or Dicamba and applied prior to planting only . This 
product may also be tank- mixed with other herbicides (examples are listed below) and applied prior to crop emergence. 
 
Acetochlor 
Clomazone 
Diuron 
Flumioxazin 
Fluometuron 
Fluridone 
Fomesafen 
Metolachlor 
Norflurazon 
Pendimethalin 
Prometryn 
Pyrithiobac-sodium 
Saflufenacil 
S-Metolachlor 
Trifluralin 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: Max imum quantity of this product that may be applied for all pre- plant, at-planting, and pre-
emergence applications combined is 99.2 fluid ounces (3.1 qt.) per acre per year.

Page 67 of 143 
 
 
Post-emergence Applications (In-Crop) 
This product may be applied over-the-top of Cotton with Glyphosate resistant Technology (in-crop) at rates up to 2 0 
fluid ounces per acre per application from cracking until the 4 leaf (node) stage of development (until the fifth true leaf 
reaches the size of a quarter) . NO MORE THAN TWO OVER -THE-TOP BROADCAST APPLICATIONS MAY BE 
MADE FROM CROP EMERGENCE THROUGH THE 4 LEAF (NODE) STAGE OF DEVELOPMENT . SEQUENTIAL 
OVER-THE-TOP OR POST-DIRECTED APPLICATIONS OF THIS PRODUCT IN-CROP MUST BE A MINIMUM OF 
10 DAYS APART AND COTTON MUST HAVE AT LEAST TWO NODES OF INCREMENTAL GROWTH BETWEEN 
APPLICATIONS. Over- the-top applications made after the 4 leaf (node) stage of development could result in boll loss, 
delayed maturity, and/or yield loss. 
 
TANK-MIXTURES: This product may be tank-mixed with the other herbicides (examples are listed below) and applied 
over-the-top of Cotton with Glyphosate resistant Technology up to the 4 leaf stage. 
 
Acetochlor 
Clethodim 
Dimethenamid 
Dimethenamid-p 
Fluazifop-p-butyl 
Metolachlor 
MSMA 
Pyrithiobac-sodium 
Quizalofop-p-ethyl 
Sethoxydim-sodium 
S-Metolachlor 
Trifloxysulfuron-sodium 
 
[Optional label text: Pyrithiobac-sodium could cause leaf yellowing and/or leaf crinkling when applied post-emergence 
(in-crop) to Cotton with Glyphosate resistant Technology . Metolachlor applied over-the-top of Cotton with Glyphosate 
resistant Technology could cause leaf injury in the form of necrotic spotting.] 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
Salvage Treatment: This application may be made after the 4 leaf stage of development and only when weeds threaten 
to cause the loss of the crop. Apply 20 fluid ounces of this product per acre either as an over-the-top application or as 
post-directed application sprayed higher on the Cotton plants and onto the weeds. 
 
IN THE STATE OF ARIZONA ONLY: Up to 30 fluid ounces of this product may be applied per acre either as an over - 
the-top application or a post-directed application for salvage treatment. Note: SALVAGE TREATMENT WILL RESULT 
IN SIGNIFICANT BOLL LOSS DELAYED MATURITY AND/OR YIELD LOSS. NO MORE THAN ONE SALVAGE 
TREATMENT MAY BE MADE PER GROWING YEAR. 
 
USE RESTRICTIONS: Maximum quantity of this product that may be applied for all in-crop applications from cracking 
to layby combined is 80 fluid ounces (2.5 qt.) per acre per year. Pre-Harvest Interval (PHI): Allow a minimum of 7 days 
between application and harvest of Cotton. DO NOT ADD ADDITIONAL SURFACTANT OR ADDITIVES CONTAINING 
SURFACTANT TO THIS PRODUCT (OTHER THAN THOSE CONTAINED IN ANY TANK -MIX PRODUCT) FOR 
OVER-THE-TOP APPLICATION TO COTTON WITH GLYPHOSATE RESISTANT TECHNOLOGY. 
 
Selective Equipment (In-Crop) 
This product may be applied using precision post directed or hooded sprayers at rates up to 20 fluid ounces per acre 
per application to Cotton wit h Glyphosate resistant Technology through layby . At this stage, use post -directed 
application equipment to direct the spray towards the base of the Cotton plants avoiding contact of the herbicide spray 
with the leaves of the plant. To minimize spray contact, maintain a low spray pressure (less than 30 lb. psi) and place 
nozzles in a low position directing a horizontal spray pattern under the leaves of the C otton plant and onto the weeds 
in the row. For enhanced results, apply this product while weeds are small (less than 3 inches in height). See additional 
use instructions in “APPLICATION EQUIPMENT AND TECHNIQUES” section of this label. 
 
TANK-MIXTURES: This product may be tank -mixed with other herbicides (examples are listed below) for in- crop 
application using precision post-directed or hooded sprayers. 
 
Acetochlor 
Carfentrazone-ethyl 
Diuron 
Flumioxazin 
Fluometuron 
Fomesafen 
Linuron 
Metolachlor 
MSMA 
Oxyfluorfen 
Pendimethalin 
Prometryn 
Pyrithiobac-sodium 
Pyrosulfuron 
S-Metolachlor 
Trifloxysulfuron-sodium 
 
[Optional label text: Pyrithiobac-sodium could cause leaf yellowing and/or leaf crinkling when applied post-emergence 
(in- crop) to Cotton with Glyphosate resistant Technology.]

Page 68 of 143 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: Maximum quantity of this product that may be applied for all in-crop applications from cracking 
to layby combined is 80 fluid ounces (2.5 qt.) per acre per year. Pre-Harvest Interval (PHI): Allow a minimum of 7 days 
between application and harvest of Cotton. NO MORE THAN TWO APPLICATIONS OF THIS PRODUCT MAY BE 
MADE FROM THE 5 LEAF STAGE THROUGH LAYBY. SEQUENTIAL OVER-THE-TOP OR POST-DIRECTED IN-
CROP APPLICATIONS OF THIS PRODUCT MUST BE A MINIMUM OF 10 DAYS APART AND COTTON MUST HAVE 
AT LEAST TWO NODES OF INCREMENTAL GROWTH BETWEEN APPLICATIONS. 
 
Pre-harvest Applications 
Apply up to 40 fluid ounces of this product per acre for annual and perennial weed control prior to crop harvest after 
20% boll crack. Note: This product will not enhance the performance of harvest aids when applied to Cotton with 
Glyphosate resistant Technology. 
 
USE PRECAUTIONS: Do not apply this product for pre-harvest weed control to Cotton grown for seed as reduction in 
germination or vigor could occur. 
 
USE RESTRICTIONS: Pre-Harvest Interval (PHI): Allow at least 7 days between application and harvest of Cotton. DO 
NOT ADD ADDITIONAL SURFACTANT OR ADDITIVES CONTAINING SURFACTANT TO THIS PRODUCT FOR 
PRE-HARVEST APPLICATION TO COTTON WITH GLYPHOSATE RESISTANT TECHNOLOGY. 
 
ATTENTION: USE OF THIS PRODUCT IN ACCORDANCE WITH LABEL DIRECTIONS IS EXPECTED TO RESULT 
IN NORMAL GROWTH OF COTTON WITH GLYPHOSATE RESISTANT TECHNOLOGY. HOWEVER, DUE TO THE 
SENSITIVITY OF COTTON FRUITING TO VARIOUS ENVIRONMENTAL CONDITIONS, AGRONOMIC PRACTICES 
AND OTHER FACTORS, IT IS IMPOSSIBLE TO ELIMINATE ALL RISKS ASSOCIATED WITH THIS PRODUCT EVEN 
WHEN APPLICATIONS ARE MADE IN ACCORDANCE WITH THE LABEL DIRECTIONS. IN SOME CASES, THESE 
FACTORS CAN RESULT IN BOLL LOSS, DELAYED MATURITY AND/OR YIELD LOSS. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
Cotton With Glyphosate Resistant Technology 
(Optional: The directions for use of this product provided in this section are specific to cotton containing Event MON 
88913 (which includes Cotton with Glyphosate resistant Technology and Cotton with XtendFlex Technology).) 
The directions for use provided in this section are specific to and may only be used with varieties designated as Cotton 
with Glyphosate resistant Technology. Applications described in this section made over -the-top of Cotton other than 
Cotton with Glyphosate resistant Technology will cause crop injury and reduced yields. 
DO NOT combine the directions for use in this section with those in “COTTON WITH GLYPHOSATE RESISTANT 
TECHNOLOGY” or “COTTON WITH GLYTOL TECHNOLOGY” section of this label. 
 
Drift of this product from application made to Cotton with Glyphosate resistant Technology onto adjacent fields of post 
4 leaf (node) Cotton with Glyphosate resistant Technology or Cotton with GlyTol Technology could cause extensive 
crop injury including boll loss, delayed maturity, and/or yield loss. 
 
TYPES OF APPLICATION: Pre-plant, At-Planting, Pre-emergence, Post-emergence (In-Crop), Pre-harvest. 
 
Refer to the following table for maximum application rates of this product with Cotton with Glyphosate resi stant 
Technology. 
 
Maximum Application Rate per Acre 
Combined total per year for all applications 160 fl. oz. (5 qt.) 
Total for all Pre-plant, At-Planting, Pre-emergence applications 99.2 fl. oz. (3.1 qt.) 
Total for all in-crop applications from cracking to 60% open bolls 120 fl. oz. (3.75 qt.) 
Total for all in-crop applications from between layby and 60% open bolls 40 fl. oz. (1.25 qt.) 
Total for all in-crop applications from 60% open bolls to 7 days before harvest 40 fl. oz. (1.25 qt.) 
Total for all in-crop applications from emergence through harvest 120 fl. oz. (3.75 qt.)

Page 69 of 143 
 
 
See “GLYPHOSATE RESISTANT AND GLYPHOSATE TOLERANT CROPS” section of this label for information 
regarding the use of this product in Glyphosate resistant and other listed Glyphosate tolerant crops. See “PRODUCT 
INFORMATION” section of this label for more information on maximum application rates. 
 
Pre-plant, At-Planting, Pre-emergence 
This product may be applied before, during or after planting Cotton with Glyphosate resistant Technology. 
 
TANK-MIXTURES: This product may be tank -mixed with 2, 4-D or Dicamba and applied prior to planting only . This 
product may also be tank-mixed with other herbicides (examples are listed below) and applied prior to crop emergence. 
 
Acetochlor 
Clomazone 
Diuron 
Flumioxazin 
Fluridone 
Fluometuron 
Fomesafen 
Metolachlor 
Norflurazon 
Pendimethalin 
Prometryn 
Pyrithiobac-sodium 
S-Metolachlor 
Saflufenacil 
Trifluralin 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: Maximum quantity of this product that may be used for all pre- plant, at -planting, and pre-
emergence applications combined is 99.2 fluid ounces (3.1 qt.) per acre per year. 
 
Post-emergence Applications (In-Crop) 
This product may be applied to Cotton with Glyphosate resistant Technology to control annual grasses and broadleaf 
weeds listed on this label. To maximize yield potential, eliminate competing weeds early. Many perennial weeds will be 
controlled or suppressed with one or more applications of this product. Use an initial application rate of 20 fluid ounces 
per acre to control or suppress 1 to 3 inch tall annual grasses and broadleaf weeds. This product may be applied post-
emergence to Cotton with Glyphosate resistant Technology using ground application equipment at rates up to 30 fluid 
ounces per acre per application. In addition to broadcast application, post -directed spray equipment may be used to 
achieve more thorough weed coverage. 
 
IN THE STATE OF ARIZONA, NEW MEXICO, AND TEXAS (WEST OF 1 -35) ONLY: Up to 40 fluid ounces of this 
product per acre may be applied post-emergence using ground application equipment. 
 
TANK-MIXTURES: This product may be tank-mixed with other herbicides (examples are listed below) and applied post-
emergence (in-crop) over-the-top of Cotton with Glyphosate resistant Technology. 
 
Acetochlor 
Clethodim 
Fluazifop-p-butyl 
Dimethenamid 
Dimethenamid-p 
Metolachlor 
MSMA 
Pyrithiobac-sodium 
Quizalofop-p-ethyl 
S-Metolachlr 
Sethoxydim 
Trifloxysulfuron-sodium 
 
[Optional label text: Pyrithiobac-sodium could cause leaf yellowing and/or leaf crinkling when applied post-emergence 
(in-crop) to Cotton with Glyphosate resistant Technology . Metolachlor applied over-the-top of Cotton with Glyphosate 
resistant Technology could cause leaf injury in the form of necrotic spotting.] 
This product may also be tank -mixed with the following herbicides (examples are listed below) for in-crop application 
using precision post-directed or hooded sprayers. 
 
Acetochlor 
Carfentrazone-ethyl 
Diuron 
Flumioxazin 
Fluometuron 
Fomesafen 
Linuron 
Metolachlor 
MSMA 
Oxyfluorfen 
Pendimethalin 
Prometryn 
Pyrithiobac-sodium 
Pyroxasulfone 
S-Metolachlor 
Trifloxysulfuron-sodium 
 
[Optional label text: Pyrithiobac-sodium could cause leaf yellowing and/or leaf crinkling when applied post-emergence 
(in-crop) in Cotton with Glyphosate resistant Technology.] 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture.

Page 70 of 143 
 
USE RESTRICTIONS: The maximum single in-crop application rate of this product to Cotton with Glyphosate resistant 
Technology using ground application equipment is 30 fluid ounces (0.94 qt.) per acre except in Arizona, New Mexico, 
and Texas (west of I-35) where up to 40 fluid ounces (1.25 qt.) per acre may be applied in a single application using 
ground application equipment. In-crop application rates above 20 fluid ounces (0.625 qt.) per acre made alone or 
with the addition of other products containing surfactant could cause a crop response including leaf speckling 
or leaf necrosis. Do not exceed a maximum single, in-crop application rate of 20 fluid ounces (0.625 qt.) of this product 
per acre when using aerial application equipment except in Arizona, New Mexico, and Texas (west of I -35) where up 
to 30 fluid ounces (0.94 qt.) may be applied as a single application using aerial equipment . Between layby and 60% 
open bolls, the maximum combined total application rate of this product is 40 fluid ounces (1.25 qt.) per acre. The 
combined total of all applications of this product from crop emergence to 60% open bolls must not exceed 120 fluid 
ounces (3.75 qt.) per acre. 
 
DO NOT ADD ADDITIONAL SURFACTANT OR ADDITIVES CONTAINING SURFACTANT TO THIS PRODUCT FOR 
OVER-THE-TOP APPLICATION TO COTTON WITH GLYPHOSATE RESISTANT TECHNOLOGY. 
 
Pre-harvest Applications 
Up to 40 fluid ounces of this product per acre may be applied to Cotton with Glyphosate resistant Technology for annual 
and perennial weed control prior to harvest after 60% boll crack. Note: This product will not enhance the performance 
of harvest aids when applied to Cotton with Glyphosate resistant Technology. 
 
USE RESTRICTIONS: Allow a minimum of 7 days between application and harvest of Cotton with Glyphosate resistant 
Technology. DO NOT ADD ADDITIONAL SURFACTANT OR ADDITIVES CONTAINING SURFACTANT TO THIS 
PRODUCT FOR PRE-HARVEST APPLICATION TO COTTON WITH GLYPHOSATE RESISTANT TECHNOLOGY. 
 
ATTENTION: USE OF THIS PRODUCT IN ACCORDANCE WITH LABEL DIRECTIONS IS EXPECTED TO RESULT 
IN NORMAL GROWTH OF COTTON WITH GLYPHOSATE RESISTANT TECHNOLOGY. HOWEVER, DUE TO THE 
SENSITIVITY OF COTTON FRUITING TO VARIOUS ENVIRONMENTAL CONDITIONS, AGRONOMIC PRACTICES, 
AND OTHER FACTORS, IT IS IMPOSSIBLE TO ELIMINATE ALL RISKS ASSOCIATED WITH THIS PRODUCT EVEN 
WHEN APPLICATIONS ARE MADE IN ACCORDANCE WITH THE LABEL DIRECTIONS. IN SOME CASES, THESE 
FACTORS CAN RESULT IN BOLL LOSS DELAYED MATURITY AND/OR YIELD LOSS. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
Cotton with GlyTol Technology 
(Optional: The directions for use of this product provided in this section are specific to Cotton containing Event GHB614 
(which includes Cotton with GlyTol Technology).) 
 
TYPES OF APPLICATION: Pre -plant, At-Planting, Pre -emergence, Post-emergence (In-crop), Selective Equipment 
(In-crop), Pre-harvest 
 
Refer to the following table for maximum application rates of this product on Cotton with GlyTol Technology. 
 
Maximum Application Rate per Acre 
Combined total per year for all applications 160 fl. oz. (5 qt.) 
Total for all Pre-plant, At-Planting, Pre-emergence applications 99.2 fl. oz. (3.1 qt.) 
Total for all in-crop applications from cracking to layby 80 fl. oz. (2.5 qt.) 
Maximum Pre-harvest application rate 40 fl. oz. (1.25 qt.) 
Combined total for all in-crop applications from emergence through harvest 120 fl. oz. (3.75 qt.) 
 
See the "GLYPHOSATE RESISTANT AND GLYPHOSATE TOLERANT CROPS" section of this label for information 
regarding the use of this product in Glyphosate resistant and other listed Glyphosate tolerant crops. See the "PRODUCT 
INFORMATION" section of this label for more information on maximum application rates. 
Pre-plant, At-Planting, Pre-emergence 
This product may be applied before, during or after planting Cotton with GlyTol Technology.

Page 71 of 143 
 
TANK-MIXTURES: This product may be tank -mixed with 2,4 -D or Dicamba and applied prior to planting only. This 
product may also be tank-mixed with other herbicides (examples are listed below) and applied prior to crop emergence. 
Acetochlor 
Clomazone 
Diuron 
Flumioxazin 
Fluometuron 
Fluridone 
Fomesafen 
Metolachlor 
Norflurazon 
Pendimethalin 
Prometryn 
Pyrithiobac-sodium 
S-Metolachlor 
Sapflufenacil 
Trifluralin 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: Maximum quantity of this product that may be applied for all pre- plant, at-planting, and pre-
emergence applications combined is 99.2 fluid ounces (3.1 qt.) per acre per year. 
 
Post-emergence Applications (In-crop) 
This product may be applied over -the-top of Cotton with GlyTol Technology (in-crop) at rates of up to 20 fluid ounces 
per acre per application from cracking until the 4 leaf (node) stage of development (until the fifth true leaf reaches the 
size of a quarter). NO MORE THAN TWO OVER -THE-TOP BROADCAST APPLICATIONS MAY BE MADE FROM 
CROP EMERGENCE THROUGH THE 4 LEAF (NODE) STAGE OF DEVELOPMENT. SEQUENTIAL OVER-THE-TOP 
OR POST-DIRECTED APPLICATIONS OF THIS PRODUCT IN -CROP MUST BE A MINIMUM OF 10 DAYS APART 
AND COTTON MUST HAVE AT LEAST TWO NODES OF INCREMENTAL GROWTH BETWEEN APPLICATIONS. 
Over-the-top application made after the 4 leaf (node) stage of development could result in boll loss, delayed maturity 
and/or yield loss. 
 
TANK-MIXTURES: This product may be tank-mixed with the following herbicides (examples listed below) and applied 
over-the-top of Cotton with GlyTol Technology up to the 4 leaf stage. 
Acetochlor 
Clethodim 
Dimethenamid 
Dimethenamid-p 
Fluazifop-p-butyl 
Metolachlor 
MSMA 
Pyrithiobac-sodium 
Quizalofop-p-ethyl 
Sethoxydim-sodium 
S-Metolachlor 
Trifloxysulfuron-sodium 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
Note: In-crop applications made alone or with the addition of other crop chemical products may result in crop response. 
Please contact the seed trait provider for any questions. 
Salvage Treatment: Salvage treatment may be made after the 4 leaf stage of development and only when weeds 
threaten to cause the loss of the crop. Apply 20 fluid ounces of this product per acre either as an over-the-top application 
or as a post-directed application sprayed higher on the Cotton plants and onto the weeds. 
IN THE STATE OF ARIZONA ONLY: Up to 30 fluid ounces of this product may be applied per acre either as an over -
the-top application or a post-directed application for salvage treatment. 
NOTE: SALVAGE TREATMENT WILL RESULT IN SIGNIFICANT BOLL LOSS, DELAYED MATURITY AND/OR 
YIELD LOSS. NO MORE THAN ONE SALVAGE TREATMENT MAY BE MADE PER YEAR. 
USE RESTRICTIONS: Maximum quantity of this product that may be applied for all in-crop applications from cracking 
to layby combined is 80 fluid ounces (2.5 qt.) per acr e per year. Allow a minimum of 7 days between application and 
harvest of Cotton. DO NOT ADD ADDITIONAL SURFACTANT OR ADDITIVES CONTAINING SURFACTANT TO THIS 
PRODUCT (OTHER THAN THOSE CONTAINED IN ANY TANK -MIX PRODUCT) FOR OVER-THE -TOP 
APPLICATION TO COTTON WITH GLYTOL TECHNOLOGY. 
Selective Equipment (In-crop) 
This product may be applied using precision post-directed or hooded sprayers at rates of up to 20 fluid ounces per acre 
per application to Cotton with GlyTol Technology through layby. At this crop stag e, use post -directed application 
equipment to direct the spray towards the base of the Cotton plants, avoiding contact of the herbicide spray with the

Page 72 of 143 
 
leaves of the plant. To minimize contact, maintain a low spray pressure (less than 30 psi ) and place nozzles in a low 
position directing a horizontal spray pattern under the leaves of the Cotton plant and onto the weeds in the row. For 
enhanced results, apply this product while weeds are small (less than 3 inches in height). See additional use instructions 
in the "APPLICATION EQUIPMENT AND TECHNIQUES" section of this label. 
TANK MIXTURES: This product may be tank -mixed with the following herbicides (examples are listed below) for in-
crop application using precision post-directed or hooded sprayers. 
 
Acetochlor 
Carfentrazone-ethyl 
Diuron 
Flumioxazin 
Fluometuron 
Fomesafen 
Linuron 
Metolachlor 
MSMA 
Oxyfluorfen 
Pendimethalin 
Prometryn 
Pyrithiobac-sodium 
Pyroxasulfone 
S-Metolachlor 
Trifloxysulfuron-sodium 
 
[Optional label text: Pyrithiobac-sodium could cause leaf yellowing and/or leaf crinkling when applied post-emergence 
(in-crop) in Cotton with GlyTol Technology.] 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: Maximum quantity of this product that may be applied for all in-crop applications from cracking 
to layby combined is 80 fluid ounces ( 2.5 qt.) per acre per year. Allow a minimum of 7 days between application and 
harvest of Cotton. NO MORE THAN TWO APPLICATIONS OF THIS PRODUCT MAY BE MADE FROM THE 5 LEAF 
STAGE THROUGH LAYBY. SEQUENTIAL OVER -THE-TOP OR POST - DIRECTED IN -CROP APPLICATIONS OF 
THIS PRODUCT MUST BE A MINIMUM OF 10 DAYS APART AND COTTON MUST HAVE AT LEAST TWO NODES 
OF INCREMENTAL GROWTH BETWEEN APPLICATIONS. 
Pre-harvest Applications 
Up to 40 fluid ounces of this product per acre may be applied for annual and perennial weed control prior to crop harvest 
after 20% boll crack. Note: This product will not enhance the performance of harvest aids when applied to Cotton with 
GlyTol Technology. 
 
USE RESTRICTION: Do not apply this product for pre-harvest weed control to Cotton grown for seed as a reduction in 
germination or vigor could occur. 
USE RESTRICTIONS: Allow a minimum of 7 days between application and harvest of Cotton. DO NOT ADD 
ADDITIONAL SURFACTANT OR ADDITIVES CONTAINING SURFACTANT TO THIS PRODUCT FOR 
PREHARVEST APPLICATION TO COTTON WITH GLYTOL TECHNOLOGY. 
ATTENTION: USE OF THIS PRODUCT IN ACCORDANCE WITH LABEL DIRECTIONS IS EXPECTED TO RESULT 
IN NORMAL GROWTH OF COTTON WITH GL YTOL TECHNOLOGY. HOWEVER, DUE TO THE SENSITIVITY OF 
COTTON FRUITING TO VARIOUS ENVIRONMENTAL CONDITIONS, AGRONOMIC PRACTI CES AND OTHER 
FACTORS, IT IS IMPOSSIBLE TO ELIMINATE ALL RISKS ASSOCIATED WITH THIS PRODUCT EVEN WHEN 
APPLICATIONS ARE MADE IN ACCORDANCE WITH THE LABEL DIRECTIONS. IN SOME CASES, THESE 
FACTORS CAN RESULT IN BOLL LOSS, DELAYED MATURITY AND/OR YIELD LOSS. 
Soybeans With Glyphosate Resistant Technology 
(Optional: The directions for use of this product provided in this section are specific to Soybeans containing Event 
GTS 40-3-2 (which includes Soybeans with Glyphosate resistant Technology). 
 
TYPES OF APPLICATION: Pre -plant, At-Planting, Pre -emergence, Post -emergence (In-Crop), Pre -harvest, Post - 
harvest. 
 
Refer to the following table for maximum application rates of this product with Soybeans with Glyphosate resistant 
Technology. 
 
Maximum Application Rate per Acre 
Combined total per year for all applications 160 fl. oz. (5 qt.) 
Total for all Pre-plant, At-Planting, Pre-emergence applications 99.2 fl. oz. (3.1 qt.)

Page 73 of 143 
 
Total for all in-crop applications from cracking through flowering (R2 stage Soybeans) 60 fl. oz. (1.875 qt.) 
Maximum Pre-harvest application rate 20 fl. oz. (0.625 qt.) 
 
See the “GLYPHOSATE RESISTANT AND GLYPHOSATE TOLERANT CROPS” section of this label for information 
regarding the use of this product in Glyphosate resistant and other listed Glyphosate tolerant crops. See “PRODUCT 
INFORMATION” section of this label for more information on maximum application rates. 
 
Pre-plant, At-Planting, Pre-emergence 
This product may be applied before, during or after planting Soybeans with Glyphosate resistant Technology. 
 
TANK-MIXTURES: This product may be tank -mixed with 2,4 -D or Dicamba and applied prior to planting only. This 
product may also be tank-mixed with other herbicides (examples are listed below) and applied prior to crop emergence. 
 
Acetochlor 
Carfentrazone-ethyl 
Chlorimuron-ethyl 
Clethodim 
Clomazone 
Cloransulam-methyl 
Dimethenamid 
Dimethenamid-p 
Fluazifop-p-butyl 
Flufenacet 
Flumetsulam 
Flumiclorac pentyl ester 
Flumioxazin 
Fluthiacet-methyl 
Fomesafen 
Imazaquin 
Imazethapyr 
Lactofen 
Linuron 
Metolachlor 
Metribuzin 
Pendimethalin 
Pyroxasulfone 
Quizalofop-p-ethyl 
S-Metolachlor 
Saflufenacil 
Sulfentrazone 
Thiafensulfuron 
Tribenuron-methyl 
Trifluralin 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: Maximum quantity of this product that may be applied for all pre- plant, at-planting, and pre-
emergence applications combined is 99.2 fluid ounces (3.1 qt.) per acre per year. 
 
Post-emergence Applications (In-Crop) 
This product may be used to control annual grasses and broadleaf weeds in Soybeans with Glyphosate resistant 
Technology from emergence (cracking) through flowering (R2 stage Soybeans). R2 stage Soybeans ends when a pod 
of 5 millimeters (3/16 inch) long appears at one of the four uppermost nodes on the main stem with a fully developed 
leaf (R3 stage). Refer to “ANNUAL WEEDS” under the “WEEDS CONTROLLED” section of this label for application 
rates on specific annual weeds. 
 
An initial application of 20 fluid ounces of this product per acre will control or suppress most 2 to 8 inch tall weeds which 
are normally found approximately 2 to 5 weeks after planting. If the initial application is delayed and weeds are larger, 
apply a higher rate of this product . This product may be applied up to 40 fluid ounces per acre as a single in- crop 
application for control of annual weeds and where dense weed populations exist. 
 
Application of 20 to 40 fluid ounces of this product per acre (single or multiple applications) will control or suppress 
perennial weeds including Bermudagrass, Canada thistle , Common milkweed , Field bindweed, H emp dogbane, 
Horsenettle, Marestail ( Horseweed), N utsedge, Quackgrass, Rhizome johnsongrass , R edvine, T rumpetcreeper, 
Swamp smartweed, and Wirestem muhly. For enhanced results, allow perennial weed species to achieve at least 6 
inches of growth before applying this product. 
 
Under adverse growing conditions including drought hail or wind damage or a poor Soybeans stand that slows or delays 
canopy closure, a sequential application of this product might be necessary to control late flushes of weeds. IN THE 
SOUTHERN STATES, A SEQUENTIAL APPLICATION OF THIS PRODUCT WILL BE NEEDED TO CONTROL NEW 
FLUSHES OF WEEDS IN THE SOYBEANS CROP WITH GLYPHOSATE RESISTANT TECHNOLOGY. To control 
Giant ragweed, apply 20 fluid ounces of this product per acre when weed is 8 to 12 inches tall to increase control and 
possibly avoid the need for a sequential application. 
 
TANK-MIXTURES: This product may be tank-mixed with other herbicides (examples are listed below) and applied post-
emergence (in-crop) over-the-top of Soybeans with Glyphosate resistant Technology. In some cases, these tank -mix 
products may cause visual Soybeans injury. 
 
Acetochlor 
Acifluorfen 
Bentazon 
Chlorimuron-ethyl 
Clethodim 
Fluazifop-p-butyl 
Flumiclorac pentyl ester 
Fluthiacet-methyl 
Fomesafen 
Imazamox 
Lactofen 
Pendimethalin 
Quizalofop-p-ethyl 
S-Metolachlor 
Sethoxydim

Page 74 of 143 
 
Cloransulam-methyl Imazethapyr Thifensulfuron-methyl 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: The combined total application of this product from crop emergence through harvest must not 
exceed 60 fluid ounces (1.875 qt.) per acre. The maximum rate for any single in-crop application is 4 0 fluid ounces 
(1.25 qt.) per acre. The maximum combined total amount of this product that may be applied during flowering (R2 stage 
Soybeans) is 40 fluid ounces (1.25 qt.) per acre. 
 
Pre-harvest Applications 
Apply up to 20 fluid ounces of this product per acre to Soybeans with Glyphosate resistant Technology for weed control 
prior to harvest after pods have set and lost all green color . Take care to avoid excessive seed shatter loss due to 
ground application equipment. 
 
USE RESTRICTIONS: Allow a minimum of 14 days between application and harvest of Soybeans grain or feeding of 
Soybeans grain, forage or hay. 
 
Post-harvest Applications 
This product may be applied for weed control after harvest of Soybeans with Glyphosate resistant Technology. Higher 
specified rates might be required to control large weeds that were growing in the field at the time of harvest. Tank -
mixtures with 2,4 -D or Dicamba may be used. It is the pesticide user’s responsibility to ensure that all products are 
registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all 
product labels involved in tank -mixing. Users must follow the most restrictive directions for use and precautionary 
statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: Application must be made at least 30 days prior to planting of any crop not listed on this label. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
Soybeans With Glyphosate Resistant Yield Technology 
(Optional: The directions for use of this product provided in this section are specific to Soybeans containing Event MON 
89788 (which includes Soybeans with Glyphosate resistant Yield Technology, Soybeans with Glyphosate resistant 
Technology, Soybeans with XtendFlex Technology).) 
TYPES OF APPLICATION : Pre-plant, At-Planting, Pre-emergence, Post-emergence (In-C rop), Pre-harvest, Post- 
harvest. 
 
Refer to the following table for maximum application rates of this product with Soybeans with Glyphosate resistant 
Yield Technology. 
 
Maximum Application Rate per Acre 
Combined total per year for all applications 160 fl. oz. (5 qt.) 
Total for all Pre-plant, At-Planting, Pre-emergence applications 99.2 fl. oz. (3.1 qt.) 
Total for all in-crop applications from cracking through flowering (R2 stage Soybeans) 60 fl. oz. (1.875 qt.) 
Maximum Pre-harvest application rate 20 fl. oz. (0.625 qt.) 
 
See the “GLYPHOSATE RESISTANT AND GLYPHOSATE TOLERANT CROPS” section of this label for information 
regarding the use of this product in Glyphosate resistant and other listed Glyphosate tolerant crops. See “PRODUCT 
INFORMATION” section of this label for more information on maximum application rates. 
 
Pre-plant, At-Planting, Pre-emergence 
This product may be applied before, during or after planting Soybeans with Glyphosate resistant Yield Technology.

Page 75 of 143 
 
TANK-MIXTURES: This product may be tank -mixed with 2, 4-D or Dicamba and applied prior to planting only. This 
product may also be tank-mixed with other herbicides (examples are listed below) and applied prior to crop emergence. 
 
Acetochlor 
Carfentrazone-ethyl 
Chlorimuron-ethyl 
Clethodim 
Clomazone 
Cloransulam-methyl 
Dimethenamid 
Dimethenamid-p 
Fluazifop-p-butyl 
Flufenacet 
Flumetsulam 
Flumiclorac pentyl ester 
Flumioxazin 
Fluthiacet methyl 
Fomesafen 
Imazaquin 
Imazethapyr 
Lactofen 
Linuron 
Metolachlor 
Metribuzin 
Pendimethalin 
Pyroxasulfone 
Quizalofop-p-ethyl 
S-Metolachlor 
Saflufenacil 
Sulfentrazone 
Thifensulfuron 
Tribenuron-methyl 
Trifluralin 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: Maximum quantity of this produc t that may be applied for all pre- plant, at-planting, and pre-
emergence applications combined is 99.2 fluid ounces (3.1 qt.) per acre per year. 
 
Post-emergence Applications (In-Crop) 
This product may be used to control annual grasses and broadleaf weeds in Soybeans with Glyphosate resistant Yield 
Technology from emergence (cracking) through flowering (R2 stage Soybeans). R2 stage Soybeans ends when a pod 
of 5 millimeters (3/16 inch) long appears at one of the four uppermost nodes on the main stem with a fully developed 
leaf (R3 stage). Refer to “ANNUAL WEEDS” under the “WEEDS CONTROLLED” section of this label for application 
rates for specific annual weeds. 
 
An initial application of 20 fluid ounces of this product per acre will control or suppress most 2 to 8 inches tall weeds 
which are normally found approximately 2 to 5 weeks after planting. If the initial application is delayed and weeds are 
larger, apply a higher rate of this product . This product may be applied up to 4 0 fluid ounces per acre as a single in-
crop application for control of annual weeds and where dense weed populations exist. 
 
Application of 20 to 40 fluid ounces of this product per acre (single or multiple applications) will control or suppress 
perennial weeds including Bermudagrass, Canada thistle , C ommon milkweed , Field bindweed, H emp dogbane, 
Horsenettle, Marestail ( Horseweed), Nutsedge, Q uackgrass, R hizome johnsongrass , R edvine, T rumpetcreeper, 
Swamp smartweed, and Wirestem muhly. For enhanced results, allow perennial weed species to achieve at least 6 
inches of growth before applying this product. 
 
Under adverse growing conditions including drought , hail or wind damage or a poor Soybeans stand that slows or 
delays canopy closure, a sequential application of this product might be necessary to control late flushes of weeds. IN 
THE SOUTHERN STATES, A SEQUENTIAL APPLICATION OF THIS PRODUCT WILL BE NEEDED TO CONTROL 
NEW FLUSHES OF WEEDS IN SOYBEANS CROP WIT H THE GLYPHOSATE RESISTANT TECHNOLOGY . To 
control Giant ragweed, apply 20 fluid ounces of this product per acre when weed is 8 to 12 inches tall to increase control 
and possibly avoid the need for a sequential application. 
 
TANK-MIXTURES: This product may be tank-mixed with other herbicides (examples are listed below) and applied post-
emergence (in-crop) over-the-top of Soybeans with Glyphosate resistant Yield Technology. In some cases, these tank-
mix products will cause visual Soybeans injury. 
 
Acetochlor 
Acifluorfen 
Bentazon 
Chlorimuron-ethyl 
Clethodim 
Cloransulam-methyl 
Fluazifop-p-butyl 
Flumiclorac pentyl ester 
Fluthiacet methyl 
Fomesafen 
Imazamox 
Imazaquin 
Lactofen 
Metolachlor 
Pendimethalin 
Quizalofop-p-ethyl 
S-Metolachlor 
Sethoxydim 
Thifensulfuron-methyl 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: The combined total application of this product from crop emergence through harvest must not 
exceed 60 fluid ounces (1.875 qt.) per acre. The maximum rate for any single in-crop application is 4 0 fluid ounces 
(1.25 qt.) per acre. The maximum combined total amount of this product that may be applied during flowering (R2 stage 
Soybeans) is 40 fluid ounces (1.25 qt.) per acre.

Page 76 of 143 
 
 
Pre-harvest Applications 
Apply up to 20 fluid ounces of this product per acre to Soybeans with Glyphosate resistant Yield Technology for weed 
control prior to harvest after pods have set and lost all green color. Take care to avoid excessive seed shatter loss due 
to ground application equipment. 
 
USE RESTRICTIONS: Allow a minimum of 14 days between application and harvest of Soybeans grain or feeding of 
Soybeans grain, forage or hay. 
 
Post-harvest Applications 
This product may be applied for weed control after harvest of Soybean s with Glyphosate resistant Yield Technology. 
Higher specified rates might be required to control large weeds that were growing in the field at the time of harvest . 
Tank-mixtures with 2,4-D or Dicamba may be used. It is the pesticide user’s responsibility to ensure that all products 
are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on 
all product labels involved in tank -mixing. Users must follow the most restrictive directions for use and precautionary 
statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: Application must be made at least 30 days prior to the planting of any crop not listed on this 
label. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
Soybeans With GT27 Technology 
(Optional: The directions for use of this product provided in this section are specific to Soybeans containing Event FG72 
(which includes Soybeans with GT27 Technology).) 
 
TYPES OF APPLICATION: Pre -plant; At-Planting; Pre -emergence; Post -emergence (In-crop ); Pre -harvest; Post -
Harvest 
 
Refer to the following table for maximum application rates of this product with Soybeans with GT27 Technology. 
 
Maximum Application Rate per Acre 
Combined total per year for all applications 160 fl. oz. (5 qt.) 
Total for all Pre-plant, At-Planting, Pre-emergence applications 99.2 fl. oz. (3.1 qt.) 
Total for all in-crop applications from cracking through flowering (R2 stage Soybeans) 60 fl. oz. (1.875 qt.) 
Maximum pre-harvest application rate 20 fl. oz. (0.625 qt.) 
 
See the "GLYPHOSATE RESISTANT AND GLYPHOSATE TOLERANT CROPS" section of this label for information 
regarding the use of this product in Glyphosate resistant and other listed Glyphosate tolerant crops. See the "PRODUCT 
INFORMATION" section of this label for more information on maximum application rates. 
Pre-plant, At-Planting, Pre-emergence 
This product may be applied before, during or after planting Soybeans with GT27 Technology. 
 
TANK-MIXTURES: This product may be tank -mixed with 2,4 -D or Dicamba and applied prior to planting only. This 
product may also be tank-mixed with the following herbicides (examples are listed below) and applied prior to crop 
emergence.

Page 77 of 143 
 
Acetochlor 
Carfentrazone-ethyl 
Chlorimuron-ethyl 
Clethodim 
Clomazone 
Cloransulam-methyl 
Dimethenamid 
Dimethenamid-p 
Fluazifop-p-butyl 
Flufenacet 
Flumetsulam 
Flumiclorac pentyl ester 
Flumioxazin 
Fluthiacet methyl 
Fomesafen 
Imazaquin 
Imazethapyr 
Lactofen 
Linuron 
Metolachlor 
Metribuzin 
Pendimethalin 
Pyroxasulfone 
Quizalofop-p-ethyl 
S-Metolachlor 
Saflufenacil 
Sulfentrazone 
Thifensulfuron 
Tribenuron methyl 
Trifluralin 
 
USE RESTRICTIONS: Maximum quantity of this product that may be applied for all pre- plant, at-planting and pre-
emergence applications combined is 99.2 fluid ounces (3.1 qt.) per acre per year. 
Post-emergence (In-crop) 
This product may be used to control annual grasses and broadleaf weeds in Soybeans with GT27 Technology from 
emergence (cracking) through flowering (R2 stage Soybeans ). R2 stage Soybeans ends when a pod 5 millimeters 
(3/16 inch) long appears at one of the four uppermost nodes on the main stem with a fully developed leaf (R3 stage). 
Refer to “ANNUAL WEEDS” under the “WEEDS CONTROLLED” section of this label for application rates for specific 
annual weeds. 
 
An initial application of 20 fluid ounces of this product per acre will control or suppress most 2 to 8 inches tall weeds 
which are normally found approximately 2 to 5 weeks after planting. If the initial application is delayed and weeds are 
larger, apply a higher rate of this product. This product may be applied up to 40 fluid ounces per acre as a single in-
crop application for control of annual weeds and where dense weed populations exist. 
 
Application of 20 to 40 fluid ounces of this product per acre (single or multiple applications) will control or suppress 
perennial weeds, including Bermudagrass, Canada thistl e, Common milkweed, Field bindweed, H emp dogbane, 
Horsenettle, Marestail ( Horseweed), Nutsedge, Quackgrass, Redvine, Rhizome johnsongrass, Trumpetcreeper, 
Swamp smartweed and W irestem muhly. For enhanced results, allow perennial weed species to achieve at least 6 
inches of growth before applying this product. 
Under adverse growing conditions, including drought, hail or wind damage or a poor Soybeans stand that slows or 
delays canopy closure, a sequential application of this product might be necessary to control late flushes of weeds. IN 
THE SOUTHERN STATES, A SEQUENTIAL APPLICATION OF THIS PRODUCT WILL BE NEEDED TO CONTROL 
NEW FLUSHES OF WEEDS IN THE SOYBEANS CROP WITH GT27 TECHNOLOGY. To control G iant ragweed, 
apply 20 fluid ounces of this product per acre when the weed is 8 to 12 inches tall to increase control and possibly 
avoid the need for a sequential application. 
TANK-MIXTURES: This product may be tank-mixed with the following herbicides (examples are listed below) and 
applied post-emergence (in-crop) over -the-top of Soybeans with GT27 Technology. In some cases, these tank -mix 
products will cause visual Soybeans injury. 
Acetochlor 
Acifluorfen 
Bentazon 
Chlorimuron-ethyl 
Clethodim 
Cloransulam-methyl 
Fluazifop-p-butyl 
Flumiclorac pentyl ester 
Fluthiacet-methyl 
Fomesafen 
Imazamox 
Imazethapyr 
Lactofen 
Pendimethalin 
Quizalofop-p-ethyl 
S-Metolachlor 
Sethoxydim 
Thifensulfuron-methyl 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank-mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: The combined total application of this product from crop emergence through harvest must not 
exceed 60 fluid ounces (1.875 qt.) per acre. The maximum rate for any single in-crop application is 40 fluid ounces 
(1.25 qt.) per acre. The maximum combined total amount of this product that may be applied during flowering (R2 stage 
Soybeans) is 40 fluid ounces (1.25 qt.) per acre.

Page 78 of 143 
 
Note: In-crop applications made alone or with the addition of other crop chemical products may result in crop response. 
Please contact the seed trait provider for any questions. 
 
Pre-harvest Applications 
Apply up to 20 fluid ounces of this product per acre to Soybeans with GT27 Technology for weed control prior to harvest 
after pods have set and lost all green color. Take care to avoid excessive seed shatter loss due to ground application 
equipment. 
 
USE RESTRICTIONS: Allow a minimum of 14 days between application and harvest of Soybeans grain or feeding of 
Soybeans grain, forage or hay. 
 
Post-harvest Applications 
This product may be applied for weed control after harvest of Soybeans with GT27 Technology. Higher rates might be 
needed to control large weeds that were growing in the field at the time of harvest. Tank-mixtures with 2,4-D or Dicamba 
may be used. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. 
Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank-
mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the 
tank-mixture. 
 
USE RESTRICTIONS: Application must be made a minimum of 30 days prior to the planting of any crop not listed on 
this label. 
 
Soybeans with Enlist E3 Technology 
(Optional: The directions for use of this product provided in this section are specific to Soybeans containing Event 
DAS44406-6 (which includes Soybeans with Enlist E3 Technology).) 
 
TYPES OF APPLICATION: Pre -plant; At-Planting; Pre -emergence; Post -emergence (In-crop); Pre -harvest; Post -
Harvest 
Refer to the following table for maximum application rates of this product with Soybeans with Enlist E3 Technology. 
Maximum Application Rate per Acre 
Combined total per year for all applications 160 fl. oz. (5 qt.) 
Total for all Pre-plant, At-Planting, Pre-emergence applications 99.2 fl. oz. (3.1 qt.) 
Total for all in-crop applications from cracking through flowering (R2 stage Soybeans) 60 fl. oz. (1.875 qt.) 
Maximum Pre-harvest application rate 20 fl. oz. (0.625 qt.) 
 
See the "GLYPHOSATE RESISTANT AND GLYPHOSATE TOLERANT CROPS" section of this label for information 
regarding the use of this product in Glyphosate resistant and other listed Glyphosate tolerant crops. See the "PRODUCT 
INFORMATION" section of this label for more information on maximum application rates. 
Pre-plant, At-Planting, Pre-emergence 
This product may be applied before, during or after planting Soybeans with Enlist E3 Technology. 
 
TANK-MIXTURES: This product may be tank -mixed with 2,4 -D or Dicamba and applied prior to planting only. This 
product may also be tank-mixed with the following herbicides (examples are listed below) and applied prior to crop 
emergence. 
 
Acetochlor 
Carfentrazone-ethyl 
Chlorimuron-ethyl 
Clethodim 
Clomazone 
Cloransulam-methyl 
Dimethenamid 
Dimethenamid-p 
Fluazifop-p-butyl 
Flufenacet 
Flumetsulam 
Flumiclorac pentyl ester 
Flumioxazin 
Fluthiacet methyl 
Fomesafen 
Imazaquin 
Imazethapyr 
Lactofen 
Linuron 
Metolachlor 
Metribuzin 
Pendimethalin 
Pyroxasulfone 
Quizalofop-p-ethyl 
S-Metolachlor 
Saflufenacil 
Sulfentrazone 
Thifensulfuron 
Tribenuron-methyl 
Trifluralin

Page 79 of 143 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant, at -planting and 
preemergence applications combined is 99.2 fluid ounces (3.1 qt.) per acre per year. 
 
Post-emergence Applications (In-crop) 
This product may be used to control annual grasses and broadleaf weeds in Soybeans with Enlist E3 Technology from 
emergence (cracking) through flowering (R2 stage Soybeans ). R2 stage Soybeans ends when a pod 5 millimeters 
(3/16 inch) long appears at one of the four uppermost nodes on the main stem with a fully developed leaf (R3 stage). 
Refer to “ANNUAL WEEDS” under the “WEEDS CONTROLLED” section of this label for application rates for specific 
annual weeds. 
 
An initial application of 20 fluid ounces of this product per acre will control or suppress most 2 to 8 inch tall weeds, 
which are normally found approximately 2 to 5 weeks after planting. If the initial application is delayed and weeds are 
larger, apply a higher rate of this product. This product may be applied up to 40 fluid ounces per acre as a single, in-
crop application for control of annual weeds and where dense weed populations exist. 
 
Application of 20 to 40 fluid ounces of this product per acre (single or multiple applications) will control or suppress 
perennial weeds, including Bermudagrass, Canada thistle, C ommon milkweed, Field bindweed, H emp dogbane, 
Horsenettle, Marestail ( Horseweed), Nutsedge, Quackgrass, Redvine, Rhizome johnsongrass, Trumpetcreeper, 
Swamp smartweed and W irestem muhly. For enhanced results, allow perennial weed species to achieve at least 6 
inches of growth before applying this product. 
 
Under adverse growing conditions, including drought, hail or wind damage, or a poor Soybeans stand that slows or 
delays canopy closure, a sequential application of this product might be necessary to control late flushes of weeds. IN 
THE SOUTHERN STATES, A SEQUENTIAL APPLICATION OF THIS PRODUCT WILL BE NEEDED TO CONTROL 
NEW FLUSHES OF WEEDS IN THE SOYBEANS CROP WITH ENLIST E3 TECHNOLOGY. To control Giant ragweed, 
apply 20 fluid ounces of this product per acre when the weed is 8 to 12 inches tall to increase control and possibly 
avoid the need for a sequential application. 
TANK-MIXTURES: This product may be tank -mixed with the following active ingredients (examples are listed below) 
and applied postemergence (in-crop) over the top of Soybeans with Enlist E3 Technology. In some cases, these tank-
mix products will cause visual Soybeans injury. 
Acetochlor 
Acifluorfen 
Bentazon 
Chlorimuron-ethyl 
Clethodim 
Cloransulam-methyl 
Fluazifop-p-butyl 
Flumiclorac pentyl ester 
Fluthiacet-methyl 
Fomesafen 
Imazamox 
Imazethapyr 
Lactofen 
Pendimethalin 
Quizalofop-p-ethyl 
S-Metolachlor 
Sethoxydim 
Thifensulfuron-methyl 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: The combined total application of this product from crop emergence through harvest must not 
exceed 60 fluid ounces (1.875 qt.) per acre. The m aximum rate for any single in-crop application is 40 fluid ounces 
(1.25 qt.) per acre. The maximum combined total amount of this product that may be applied during flowering (R2 stage 
Soybeans) is 40 fluid ounces (1.25 qt.) per acre. 
 
Note: In-crop applications made alone or with the addition of other crop chemical products may result in crop response. 
Please contact the seed trait provider for any questions. 
 
Pre-harvest Applications 
Apply up to 20 fluid ounces of this product per acre to Soybeans with Enlist E3 Technology for weed control prior to 
harvest after pods have set and lost all green color. Take care to avoid excessive seed shatter loss due to ground 
application equipment.

Page 80 of 143 
 
 
USE RESTRICTIONS: Allow at least 14 days between application and harvest of Soybeans grain or feeding of 
Soybeans grain, forage or hay. 
 
Post-harvest Applications 
This product may be applied for weed control after harvest of Soybeans with Enlist E3 Technology. Higher rates might 
be needed for control of large weeds that were growing in the field at the time of harvest. Tank -mixtures with 2,4-D or 
Dicamba may be used. It is the pesticide user’s responsibility to ensure that all products are registered for the intended 
use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in 
tank-mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in 
the tank-mixture. 
 
USE RESTRICTIONS: Application must be made at least 30 days prior to the planting of any crop not listed on this 
label. 
 
Sugar Beets With Glyphosate Resistant Technology 
(Optional: The directions for use of this product provided in this section are specific to Sugar beet containing Event H7- 
1 (which includes Sugar beet with Glyphosate resistant Technology).) 
TYPES OF APPLICATION: Pre-plant, At-Planting, Pre-emergence, Post-emergence (In-Crop). 
 
Refer to the following table for maximum application rates of this product with Sugar beets with Glyphosate resistant 
Technology. 
 
Maximum Application Rate per Acre 
Combined total per year for all applications 160 fl. oz. (5 qt.) 
Total for all Pre-plant, At-Planting, Pre-emergence applications 99.2 fl. oz. (3.1 qt.) 
Maximum single application rate from emergence to 8 leaf stage 30 fl. oz. (0.94 qt.) 
Total for all applications made from emergence to 8 leaf stage 50 fl. oz. (1.56 qt.) 
Maximum single application rate between 8 leaf stage and canopy closure 20 fl. oz. (0.625 qt.) 
Total for all applications made between 8 leaf stage and canopy closure 40 fl. oz. (1.25 qt.) 
 
See the “GLYPHOSATE RESISTANT AND GLYPHOSATE TOLERANT CROPS” section of this label for information 
regarding the use of this product in Glyphosate resistant and other listed Glyphosate tolerant crops. See “PRODUCT 
INFORMATION” section of this label for more information on maximum application rates. 
 
Pre-plant, At-Planting, Pre-emergence 
This product may be applied before, during or after planting of Sugar beets with Glyphosate resistant Technology. 
 
TANK-MIXTURES: This product may be tank-mixed with other herbicides (an example is listed below) and applied prior 
to crop emergence. 
 
Ethofumesate 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and l imitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: Maximum quantity of this product that may be applied for all pre- plant, at-planting, and pre-
emerqence applications combined is 99.2 fluid ounces (3.1 qt.) per acre per year. 
 
Post-emergence Applications (In-Crop) 
This product may be applied over -the-top of Sugar beets with Glyphosate resistant Technology to control annual 
grasses and broadleaf weeds from emergence to 30 days prior to harvest. To maximize yield potential, eliminate 
competing weeds early. Up to 4 applications of this product may be made with a minimum of 10 days between each 
application. This product will control or suppress most perennial weeds. For some perennial weeds, repeat applications 
might be required to eliminate crop competition throughout the growing season. Refer to “ANNUAL WEEDS ” and 
“PERENNIAL WEEDS” under the “WEEDS CONTROLLED” section of this label for application rates for specific weeds. 
 
TANK-MIXTURES: This product may be tank-mixed with other herbicides (examples are listed below) and applied post-
emergence (in-crop) over-the-top of Sugar beets with Glyphosate resistant Technology.

Page 81 of 143 
 
Acetochlor 
Clethodim 
Clopyralid 
Desmedipham 
Dimethenamid-p 
Ethofumesate 
Fluazifop-p-butyl 
Metolachlor 
Phenmedipham 
Pendimethalin 
Quizalofop-p-ethyl 
S-Metolachlor 
Trisulfuron-methyl 
 
[Optional label text: Ethofumesate can cause significant Sugar beet injury. Refer to the labels of these products for 
crop injury precautions.] 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restric tions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: The combined total application of this product from crop emergence through harvest must not 
exceed 90 fluid ounces (2.81 qt.) per acre. The maximum rate for any single application from crop emergence until the 
8 leaf stage is 30 fluid ounces (0.94 qt.) per acre. The maximum rate for any single application between the 8 leaf stage 
and canopy closure is 20 fluid ounces (0.625 qt.) per acre. Pre -Harvest Interval (PHI): Allow a minimum of 30 days 
between application and Sugar beet harvest. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
FARMSTEAD USES 
TYPES OF USES: Chemical Mowing, Cut Stump Application, Farmstead Weed Control, Trim and Edge, 
Greenhouse/Shadehouse, Habitat Management 
 
Refer to “ANNUAL WEEDS” and “PERENNIAL WEEDS” under the “WEEDS CONTROLLED” section of this label for 
application rates for specific weeds. When applied as directed, this product will control the listed annual and perennial 
grasses and broadleaf weeds. 
 
Application rates of this product specified in the following sections or on separate supplemental labeling or Fact Sheets 
published for this product for hard-to -control weeds supersede rates in the "ANNUAL WEEDS" and "PERENNIAL 
WEEDS" sections. 
 
Chemical Mowing 
This product may be used to suppress growth of perennial grasses listed in this section along farm ditches and on any 
other parts of the farmstead to serve as a substitute for mowing. Apply 4 fluid ounces of this product per acre to suppress 
Bahiagrass, Fine fescue, Kentucky bluegrass , Orchardgrass, Quackgrass or Tall fescue covers or 10 fluid ounces to 
suppress Bermudagrass or 40 fluid ounces to suppress Paragrass or Torpedograss. Apply in 10 to 20 gallons of spray 
solution per acre. 
 
USE PRECAUTIONS: Use only in areas where some temporary injury or discoloration of perennial grasses can be 
tolerated. 
 
Cut Stump Application 
TYPES OF USES: Treating cut stumps on any terrestrial site. 
 
This product may be used to control regrowth and resprouting of many species of woody brush, trees and vines . Cut 
the woody brush or tree close to the soil surface and immediately apply 50 to 100% (undiluted) solution of this product 
to the freshly cut surface using application equipment capable of covering the entire cambium . A delay in application 
could result in reduced performance. For enhanced results, cut the woody brush or tree during period of active growth 
and full leaf expansion and apply this product. Some of the species controlled are as follows: 
 
Alder 
Eucalyptus 
Madrone 
Oak 
Pepper (Brazilian) 
Pine (Austrian) 
Reed (Giant) 
Saltcedar 
Sweetgum 
Tan oak 
Willow 
 
 
USE PRECAUTIONS: Do not make cut stump application when roots of desirable woody brush or trees might be 
grafted to the roots of the cut stump. Some sprouts, stems or trees can share a common root system. Adjacent trees 
having a similar age , height, and spacing could be an indicator of a shared root system. Whether grafted or shared ,

Page 82 of 143 
 
injury is likely to occur to adjacent stems or trees when this product is applied to one or more trees sharing a common 
root system. 
 
Farmstead Weed Control, Trim and Edge 
This product may be used to control annual weeds, perennial weeds, woody brush, trees and vines found on any part 
of the farmstead including around building foundations and equipment storage areas, along and in fences, in dry ditches 
and canals, along ditch banks, driveways, farm roads, farm yards, fencerows, parking areas, rangeland, rights-of-way, 
shelterbelts, storage areas, and prior to planting landscape ornamentals. 
 
TANK-MIXTURES: This product may be tank-mixed with other herbicides (examples are listed below) to control weeds 
on farmstead. 
 
Bromacil 
Chlorsulfuron 
2,4-D 
Dicamba 
Diuron 
Imazapic 
Imazapyr 
Metsulfuron-methyl 
Oryzalin 
Oxadiazon 
Pendimethalin 
Prodiamine 
Sulfometuron-methyl 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
For annual weeds, apply 20 fluid ounces of this product per acre when weeds are less than 6 inches tall, 30 fluid ounces 
per acre when weeds are 6 to 12 inches tall, and 40 fluid ounces per acre when weeds are greater than 12 inches tall. 
For perennial weeds, apply 40 to 99.2 fluid ounces (1.25 to 3.1 qt.) per acre in a tank-mix with one of the products listed 
above. For application of tank -mixtures using a backpack sprayer , handgun or other handheld applicator s, see 
“ANNUAL WEEDS” and “PERENNIAL WEEDS” under the “WEEDS CONTROLLED” section of this label for the 
required concentration of this product in the tank-mix. 
 
Greenhouse / Shadehouse Use 
This product may be used to control weeds in and around greenhouses and shadehouses. 
 
Remove desirable vegetation before applying this product inside a greenhouse or shadehouse. 
 
USE RESTRICTIONS: Turn air circulation fans off when applying this product inside a greenhouse or shadehouse and 
leave them off until the application solution has dried. Do not use this product inside residential greenhouses. 
 
Habitat Management 
TYPES OF USES: Habitat Restoration and Maintenance, Wildlife Food Plots. 
 
HABITAT RESTORATION AND MAINTENANCE 
This product may be used to control exotic and other undesirable vegetation in habitat management areas. Application 
may be made to allow recovery of native plant species or prior to planting desirable native species and for similar broad 
spectrum vegetation control requirements in habitat management areas . Spot treatment may be used to selectively 
remove unwanted plants for habitat maintenance and enhancement. 
 
WILDLIFE FOOD PLOTS 
This product may be used to eliminate annual and perennial weeds prior to planting wildlife food plots. Any wildlife food 
species may be planted after applying this product or native species may be allowed to repopulate the area. If tillage is 
needed to prepare a seedbed, wait at least 7 days after application before tilling. 
 
USE RESTRICTIONS: There are no rotational restrictions for planting any wildlife food species or for allowing native 
species to repopulate the area following application of this product. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
FORESTRY, INDUSTRIAL, UTILITY RIGHTS -OF-WAY, TURF, AND 
ORNAMENTAL SITES 
This product may be used according to the directions for use described in this section.

Page 83 of 143 
 
 
TERRESTRIAL USE SITES 
This product may be used to control weeds, woody brush, trees and vines on maintained landscapes, on improved and 
unimproved land, on lawns and turf and around ornamentals on industrial, commercial and residential sites*, including 
airports, apartment complexes*, chaparrals, ditch banks, driveways, dry ditches, dry canals, farmsteads, fencerows, 
forestry sites, golf courses, greenhouses, lumber yards, manufacturing sites, municipal sites, nurseries, natural areas, 
office complexes, ornamental beds, parks, parking areas, pastures, petroleum tank farms, pumping installations, 
railroads, rangeland, recreational areas, residential areas*, roadsides, schools, shadehouses, sod and Turfgrass seed 
farms, sports complexes, storage areas, substations, utility rights -of-way, utility sites, warehouse areas, wildlife food 
plots and wildlife management areas. 
*Intended To Be Applied By Certified/Professional Applicators 
 
This product may be used for non-selective control of unwanted vegetation on any site listed in this section for trim-
and-edge application around objects, including around building foundations, equipment storage areas and trees, along 
and in fences, and to eliminate unwanted weeds growing in and around established shrub beds and ornamental 
plantings. 
 
This product may also be used for complete elimination of vegetation from a terrestrial site prior to planting ornamentals, 
flowers or Turfgrass (sod or seed), and prior to land development, including prior to beginning construction projects or 
the laying of asphalt or other road material. Application of this product may be repeated, as needed, to maintain bare 
ground, up to a total application of 216 fluid ounces (6.75 qt.) per acre per year. 
 
This product may be used for establishment and maintenance of fuel breaks, for establishing fire perimeters and black 
lines, along fire roads and to facilitate prescribed burning practices on any site described in this section. 
 
[Optional label text: This product may also be used for weed control or growth regulation on] [Optional list of any 
terrestrial uses that are included in this section, including: Christmas tree farms, Farmsteads, Production nurseries, 
Sod farms and Turfgrass seed farms.] 
Unless otherwise specified, application of this product may be made according to the directions for use in the sections 
that follow to any of these sites using any application equipment described on this label to control any weeds listed 
under “WEEDS CONTROLLED – FORESTRY, INDUSTRIAL, UTILITY RIGHTS -OF-WAY, TURF , AND 
ORNAMENTAL SITES” section at the end of this label. [Alternative Text: Unless otherwise directed, application of this 
product may be made according to the directions for use in the sections that follow to any of these sites using any 
method of application described on this label to control any weeds, woody brush, trees and vines listed in the “WEEDS 
CONTROLLED – FORESTRY, INDUSTRIAL, UTILITY RIGHTS-OF-WAY, TURF, AND ORNAMENTAL SITES” section 
at the end of this label.] [Alternative Text: Unless otherwise directed, application of this product may be made according 
to the directions for use in the sections that follow on any of these sites using any method of application described on 
this label to control any weeds, woody brush, trees and vines listed in the "ANNUAL WEEDS" "PERENNIAL WEEDS" 
and "WOODY BRUSH, TREES AND VINES" found under “WEEDS CONTROLLED – FORESTRY, INDUSTRIAL, 
UTILITY RIGHTS-OF-WAY, TURF, AND ORNAMENTAL SITES” section at the end of this label.] 
 
ADDITIONAL USE SITES 
In addition to the above listed uses, this product may be used in the management of the following sites: Commercial, 
Residential* and Recreational Area Management; Forestry, Hardwood, and Christmas Tree Management; Native and 
Wildlife Habitat Management; Ornamental and Production Nursery Management; Pasture Management; Railroad 
Management; Rangeland Management; Roadside Management; Utility Management. 
 
Unless otherwise directed, any application of this product described under the “TURF” section or any other section of 
this label may be made on the following use sites described, where applicable, using any method of application on this 
label that is appropriate. 
*Intended To Be Applied By Certified/Professional Applicators 
 
APPLICATION EQUIPMENT AND METHODS 
This product may be applied to “FORESTRY, INDUSTRIAL, UTILITY RIGHTS-OF-WAY, TURF, AND ORNAMENTAL 
SITES” using the appropriate equipment and methods listed in the section “APPLICATION EQUIPMENT AND 
TECHNIQUES” at the beginning of this label. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac)

Page 84 of 143 
 
 
Commercial, Residential*, and Recreational Area Management 
All applications of this product described in this section may be used in commercial, residential*, and recreational areas, 
including parks, schools and athletic fields, using any appropriate method of application described on this label, 
including spot treatment of unwanted vegetation, trim -and-edge application around trees, fences, walking paths, 
buildings, sidewalks, nature trails and other objects in these areas, to eliminate unwanted weeds growing in established 
shrub and ornamental beds, for Turf management and renovation, and to eliminate vegetation from a site prior to 
development, including pri or to planting an area to ornamentals, flowers or Turfgrass (sod or seed) or beginning 
construction projects. 
*Intended To Be Applied By Certified/Professional Applicators 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Forestry, Hardwood, and Christmas Tree Management 
This product may be used to control or partially control woody brush, trees, and herbaceous weeds on any tree site, 
including forestry settings, Christmas tree plantations, and silvicultural and production nursery sites using any 
appropriate method of application listed on this label. 
 
See the “WEEDS C ONTROLLED – FORESTRY, INDUSTRIAL, UTILITY RIGHTS -OF-WAY, TURF, AND 
ORNAMENTAL SITES” section of this label for application rates and specific use directions. 
 
Weed Management, Site Preparation 
This product may be used to control or partially control undesirable woody brush, trees, vines, and herbaceous weeds 
listed in this section for preparing sites prior to planting any tree species, including Christmas trees, Eucalyptus trees 
and hybrid tree cultivars, and for controlling weeds around established trees, [Optional text: for the release of conifer 
and hardwood trees,] establishing wildlife openings and maintaining roads on any tree site. 
 
TANK-MIXTURES: This product may be applied in a tank-mix with the other herbicides (examples are listed below) to 
increase the spectrum of vegetation controlled. Any application rate of this product listed in this section may be used in 
a tank-mix with the following products for tree site management, including site preparation, provided that the product is 
labeled for the use on the site of application and prior to planting the desired species. 
 
Imazapyr 
Metsulfuron-methyl 
Sulfometuron-methyl 
Triclopyr 
 
For control of herbaceous weeds, apply these tank-mix products at the lower end of the application rate range specified 
on the product label. For control or partial control of dense stands or hard- to-control woody brush, trees and vines , 
apply these products at a rate or spray solution concentration towards the higher end of the given range. 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
Conifer Release, Mid-Rotation Conifer Release, Hardwood Release, Timber Stand Improvement 
This product may be applied as a directed spray using a handheld sprayer or using any selective application equipment 
described on this label to control woody and herbaceous weeds and other undesirable understory vegetation below the 
tree crop canopy in conifer plantations, hardwood sites, Christmas tree plantations, and silvicultural and ornamental 
nurseries to facilitate the release and growth of conifer and hardwood trees. 
 
This product may also be applied using ground broadcast equipment or as a directed spray application for mid-rotation 
release under the canopy of pines, other conifers and hardwoods. 
 
USE PRECAUTIONS: Avoid contact of spray drift, mist or drips with foliage, green bark or non-woody surface roots of 
desirable plant species. Use application techniques that prevent or minimize contact of this product with foliage of 
desired trees or other plants through direct contact or off-target spray movement. 
 
[Optional label text : USE RESTRICTIONS: Do not apply this product as an over -the-top broadcast application for 
conifer or hardwood release, unless otherwise directed on this label or on separate supplemental labeling for this 
product.]

Page 85 of 143 
 
 
[This section is optional in the final printed label] Conifer Release – Broadcast Application 
This product may be broadly applied over the top of conifer tree species listed in this section after formation of final 
conifer resting buds in the F all or prior to initial bud swelling in the spring for control, partial control or suppression of 
herbaceous weeds and hardwoods listed in the “WEEDS CONTROLLED – FORESTRY, INDUSTRIAL, UTILITY 
RIGHTS-OF-WAY, TURF AND ORNAMENTAL SITES” section of this label to facilitate the release of these tree species 
in a forestry, plantation or nursery for a minimum of one growing season. Make this application only where conifers 
have been established for a minimum of one growing season. 
 
USE PRECAUTIONS: Conifer injur y can occur when this product is applied at rates higher than prescribed on this 
label, where spray applications overlap, if application is made when conifers are actively growing or when they are 
growing under stress from drought, flood, improper planting or insect, animal or disease damage. 
 
Conifer Release Outside the Southeastern United States: For release of the following conifer species growing for 
a minimum of one growing season in most areas outside the southeastern United States, apply 2 0 to 40 fluid ounces 
acre as a broadcast application over the top of the conifer trees. 
 
Douglas fir 
Fir species 
Hemlock 
Pines* 
California redwood 
Spruce 
* Includes all species except Loblolly, Longleaf, Shortleaf or Slash pine. 
 
Apply 20 to 34 fluid ounces of this product for release of Douglas fir, Pine, and Spruce that have been established for 
only one growing season (except in California). 
 
For release of Spruce (Picea spp.) in Maine, Michigan, Minnesota, New Hampshire and Wisconsin, up to 6 0.8 fluid 
ounces of this product may be applied after formation of final resting buds in the Fall for control of woody brush and 
tree species. 
 
USE PRECAUTIONS: Ensure that the conifers are well hardened off before application of this product. [Optional text 
if adding surfactant to spray solutions of this product is allowed: The addition of nonionic surfactants to spray solutions 
of this product when making over-the-top conifer release applications could cause conifer injury.] 
 
Conifer Release in the Southeastern United States: For release of the following conifer species established for more 
than one growing season in the southeastern United States, apply 30 to 51 fluid ounces of this product per acre in the 
Fall as a broadcast application over the top of the trees. For release of these species after only one growing season, 
apply only 20 fluid ounces of this product per acre. 
 
Eastern white pine 
Loblolly pine 
Longleaf pine 
Short leaf pine 
Slash pine 
Virginia pine 
 
TANK-MIXTURES: This product may be applied for conifer release in a tank -mix with other herbicides (examples are 
listed below) to provide a broader spectrum of post-emergence weed control and for residual control of weeds listed on 
the label of those products. Apply only these tank-mixtures over-the-top of conifer species that are approved for this 
use for all products in the mix. 
 
Imazapyr 
Metsulfuron-methyl 
Sulfometuron-methyl 
 
For herbaceous release of Loblolly pine, Longleaf pine, and Virginia pine in the Spring and early Summer, apply 10 to 
15 fluid ounces of this product per acre in a tank-mixt with an appropriate rate of Sulfometuron-methyl or 
Sulfometuron-methyl plus Metsulfuron-methyl. 
 
[It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture.] 
 
Late Summer and Fall after Resting Bud Formation 
For release of Jack pine, White pine, and White spruce, apply 20 to 40 fluid ounces of this product per acre in a tank -
mix with an appropriate rate of Sulfometuron-methyl or Sulfometuron-methyl plus Metsulfuron-methyl that will not harm 
these conifer species. 
 
For release of Douglas fir, apply 20 to 30 fluid ounces of this product per acre in a tank-mix with an appropriate rate of 
Imazapyr.

Page 86 of 143 
 
For release of Balsam fir and Red spruce, apply 40 fluid ounces of this product per acre in a tank-mix with an appropriate 
rate of Imazapyr. 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restriction s and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Native and Wildlife Habitat Management 
This product may be used to cont rol exotic and other undesirable vegetation in wildlife habitat and natural areas, 
including riparian and estuarine areas, rangeland, and wildlife refuges. Application may be made to allow recovery of 
native plant species or prior to planting desirable native species, and for similar broad spectrum vegetation control. 
 
Spot treatment, cut stump, cut stem, stem injection, wiper applicator and all other methods of application listed on this 
label may be used to selectively remove unwanted plants for habitat management and enhancement. 
 
This product may also be used to eliminate annual and perennial weeds prior to planting wildlife food plots. Any wildlife 
food species may be planted after applying this product or native species may be allowed to repop ulate the area. If 
tillage is needed to prepare a seedbed, wait a minimum of 7 days after application before tillage to allow translocation 
of this herbicide into underground plant parts. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Ornamental and Production Nursery Management 
All uses of this product described in this section may be used in a plant nursery setting using any appropriate method 
of application described on this label. 
 
This product may be used to clear an area of unwanted vegetation prior to planting any ornamental plant, tree, shrub 
or other plants. 
 
This product may also be used to control weeds growing around established woody ornamental species , including 
Arborvitae, Azalea, Boxwood, Crabapple, Eucalyptus, Euonymus, Fir, Douglas fir, Jojoba, Hollies, Lilac, Magnolia, 
Maple, Oak, Poplar, Privet, Pine, Spruce and Yew. This product may also be used to trim and edge around potted 
plants and other objects in a plant nursery. 
 
USE PRECAUTIONS: Protect desirable plants from the spray solution using shields or coverings made of waterproof 
material. Take care to avoid contact of spray, drift or mist with foliage, green stems or immature bark of established 
ornamental species. 
 
Greenhouse/Shadehouse 
This product may be used to control weeds growing in and around greenhouses and shadehouses. 
 
USE RESTRICTIONS: Desirable vegetation must not be present during application in a greenhouse. Turn air circulation 
fans off before applying this product inside a greenhouse or shadehouse and leave them off until the application solution 
has dried. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac)

Page 87 of 143 
 
 
Railroad Management 
All uses of this product described in the “TURF” section or any other sections found under “FORESTRY, INDUSTRIAL, 
UTILITY RIGHTS-OF-WAY, TURF AND ORNAMENTAL SITES” may be used on railroad sites using any method of 
application described. 
 
Application of this product along railroad rights-of-way may be made in up to 80 gallons of spray solution per acre. 
 
Bare Ground, Ballast and Shoulders, Crossings, Spot Treatment 
This product may be used to maintain bare ground on railroad ballast and shoulders and reduce the need for mowing 
and mechanical brush removal along railroad rights-of-way. 
 
Application of this product may be repeated as weeds continue to emerge to maintain bare ground up to a maximum 
total application rate of 216 fluid ounces (6.75 qt.) of this product per acre per year. 
 
TANK-MIXTURES: This product may be applied in a tank-mixture with other herbicides (examples are listed below) for 
enhanced control of woody brush and trees for bare ground, ballast and shoulder, crossings, and spot treatment 
applications, and other brush, tree, and vine control on railroad sites, provided that the product used is labeled for the 
application being made. 
 
Bromacil 
Chlorsulfuron 
Clopyralid 
2,4-D 
Dicamba 
Diquat 
Diuron 
Hexazinone 
Imazapyr 
Metsulfuron-methyl 
Pelargonic acid 
Sulfometuron-methyl 
Sulfosulfuron 
Tebuthiuron 
Triclopyr 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and lim itations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
Brush, Tree, and Vine Control 
This product may be used to control woody brush, trees and vines along railroad rights-of-way. 
 
Apply 80 to 216 fluid ounces (2.5 to 6.75 qt.) of this product in up to 80 gallons of spray solution per acre as a broadcast 
application using either a boom or boomless sprayer. Apply a 0. 6 to 1.3% solution of this product when using high 
volume application equipment with a spray-to-wet technique or a 3.1 to 6.2% solution when using low volume directed 
sprays for spot treatment. 
 
TANK MIXTURES: This product may be applied in a tank -mix with other products (examples are listed below) for 
enhanced control of woody brush, trees and vines along railroad rights-of-way, provided that the product is labeled for 
use on these sites. 
 
Chlorsulfuron 
Clopyralid 
2,4-D 
Dicamba 
Fosamine 
Hexazinone 
Imazapyr 
Metsulfuron-methyl 
Picloram 
Triclopyr 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
Weed Control in Dormant and Actively Growing Bermudagrass 
This product may be used to control or partially control many annual and perennial weeds in dormant and actively 
growing Bermudagrass along Railroad rights-of-way. See the “WEEDS CONTROLLED - FORESTRY, INDUSTRIAL, 
UTILITY RIGHTS -OF-WAY, TURF AND ORNAMENTAL SITES” section at the end of this label for weed control 
directions for use. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac)

Page 88 of 143 
 
 
Roadside Management 
All uses of this product described under “FORESTRY, INDUSTRIAL, UTILITY RIGHTS -OF-WAY, TURF AND 
ORNAMENTAL SITES” section of this label may be used for weed management along roadways, including weed 
control in dormant and active Bermudagrass and Bahiagrass, weed control along shoulders and under and around 
guardrails, signposts, and other objects along the road using any method of application described on this label. 
 
TANK-MIXTURES: This product may be tank -mixed with other herbicide (examples are listed below) for shoulder, 
guardrail, spot treatment, and maintaining bare ground applications provided that the product used is labeled for use 
on these sites. 
 
Bromacil 
Chlorsulfuron 
Clopyralid 
2,4-D 
Dicamba 
Diuron 
Fosamine 
Hexazinone 
Imazapic 
Imazapyr 
Metsulfuron-methyl 
Oryzalin 
Oxadiazon 
Pendimethalin 
Picloram 
Prodiamine 
Sulfometuron 
Sulfosulfuron 
Triclopyr 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Turf 
Weed Control, Renovation, and Chemical Mowing in Turf 
The use of this product described below may be applied to Turfgrass growing on any terrestrial site listed under 
“FORESTRY, INDUSTRIAL, UTILITY RIGHTS-OF-WAY, TURF, AND ORNAMENTAL SITES” section of this label. 
 
Weed Control in Dormant Bermudagrass and Bahiagrass 
This product may be used to control or suppress many Winter annual weeds and Tall fescue for effective release of 
dormant Bermudagrass and Bahiagrass prior to spring green-up in areas where these Turfgrasses are desirable ground 
covers and some temporary injury or discoloration can be tolerated. 
 
Apply 4 to 40 fluid ounces of this product in 10 to 40 gallons of water per acre when Bermudagrass and Bahiagrass are 
dormant and prior to Spring green-up. 
 
Application of more than 10 fluid ounces of this product per acre on highly maintained Bermudagrass and Bahiagrass 
turf including golf courses and lawns could result in injury or delayed green-up in the Spring. 
 
For residual weed control in dormant Bermudagrass and Bahiagrass, this product may be tank -mixed with 
Sulfometuron-methyl, Sulfometuron -methyl plus Metsulfuron -methyl or Sulfosulfuron herbicides. Apply 4 to 40 fluid 
ounces of this product per acre in a tank-mix with an appropriate rate of Sulfometuron-methyl , Sulfometuron-methyl 
plus Metsulfuron-methyl or Sulfosulfuron in 10 to 40 gallons of water per acre. To avoid delays in green-up and minimize 
injury, apply no more than the required amount of Sulfometuron- methyl or Sulfometuron-methyl plus Metsulfuron-
methyl herbicide per acre on Bermudagrass and on Bahiagrass, and avoid application when these gras ses are in a 
semi-dormant condition. 
 
DO NOT apply this product in a tank -mix with Sulfometuron-methyl, Sulfometuron-methyl plus Metsulfuron-methyl or 
Sulfosulfuron herbicides on highly maintained Bermudagrass and Bahiagrass turf including golf courses and lawns. 
 
Weed Control in Actively Growing Bermudagrass 
This product may be used to control or partially control many annual and perennial weeds in actively growing 
Bermudagrass. Some Bermudagrass injury could result from the application of this product, but the Bermudagrass will 
recover under moist conditions once the effects of the product wear off. Use only on well -established Bermudagrass 
where some temporary injury or discoloration can be tolerated.

Page 89 of 143 
 
Apply 10 to 30 fluid ounces of this product in 10 to 40 gallons of spray solution per acre. Use a lower application rate 
within this range when controlling annual weeds less than 4 inches tall (or runner length) and increase the rate towards 
the upper end of the range as weeds increase in size or as they approach flower or seed head formation. At these 
application rates, this product will provide partial control of the following perennial weeds in actively growing 
Bermudagrass: 
 
Bahiagrass 
Bluestem (Silver) 
Fescue (Tall) 
Johnsongrass 
Trumpetcreeper 
Vaseygrass 
 
USE PRECAUTIONS: Applying more than 10 fluid ounces of this product per acre on highly maintained Bermudagrass 
including golf courses and lawns, could cause unacceptable turf injury and discoloration. 
 
For a broader weed control spectrum in actively growing Bermudagrass, this product may be tank -mixed with an 
appropriate rate of Sulfometuron-methyl, Sulfometuron-methyl plus Metsulfuron-methyl or Sulfosulfuron. Apply these 
tank-mixtures only on well-established Bermudagrass where some temporary injury or discoloration can be tolerated. 
Make no more than one application of this product in these tank -mixtures in the same season, otherwise the 
Bermudagrass could be severely injured. 
 
Apply 4 to 20 fluid ounces of this product per acre in a tank -mix with an appropriate rate of Sulfosulfuron to control or 
partially control Johnsongrass and other weeds listed on the Sulfosulfuron label. Use a higher application rate of both 
products within the given ranges for control of annual or perennial weeds greater than 6 inches tall. 
 
Apply 10 to 20 fluid ounces of this product per acre in a tank -mix with an appropriate rate of Sulfometuron-methyl or 
Sulfometuron-methyl plus Metsulfuron-methyl for enhanced control of weeds listed on those labels. Use a lower 
application rate of each product within the given ranges to control annual weeds listed on the labels that are less than 
4 inches tall (or runner length) and increase the rates toward the upper end of the ranges as annual weeds increase in 
size and approach the flower or seed head stage. This tank -mix will provide partial control of the following perennial 
weeds in actively growing Bermudagrass: 
 
Bahiagrass 
Bluestem (Silver) 
Broomsedge 
Dallisgrass 
Dock (Curly) 
Dogfennel 
Fescue (Tall) 
Johnsongrass 
Poorjoe 
Trumpetcreeper 
Vaseygrass 
Verbain (Blue) 
 
USE PRECAUTIONS: Apply these tank-mixtures only on well-established Bermudagrass where some temporary injury 
or discoloration can be tolerated. 
 
DO NOT apply this product in tank-mixture with Sulfometuron-methyl or Sulfometuron-methyl plus Metsulfuron-methyl 
on highly maintained Bermudagrass including golf courses and lawns. 
 
Weed Control in Actively Growing Bahiagrass 
For suppression of vegetative growth and seed head inhibition of Bahiagrass for approximately 45 days, apply 4 fluid 
ounces of this product in 10 to 40 gallons of water per acre 1 to 2 weeks after full green-up or after mowing to a uniform 
height of 3 to 4 inches prior to seed head emergence. 
 
For growth suppression of Bahiagrass for up to 120 days, apply 2.5 fluid ounces of this product per acre followed by 
an application of 1. 4 to 2.5 fluid ounces per acre about 45 days later. Make no more than two growth suppression 
applications per year. 
 
For broad spectrum weed control in actively growing Bahiagrass, this product may be tank-mixed with appropriate rate 
of Sulfometuron-methyl, Sulfometuron-methyl plus Metsulfuron-methyl or Sulfosulfuron. 
 
Apply 1.4 to 3.3 fluid ounces of this product per acre in a tank-mix with an appropriate rate of Sulfosulfuron per acre to 
control perennial weeds or annual weeds greater than 4 inches in height. 
 
Apply 4 fluid ounces of this product per acre in a tank-mix with appropriate rate of Sulfometuron-methyl or Sulfometuron-
methyl plus Metsulfuron-methyl 1 to 2 weeks following an initial Spring mowing for enhanced control of weeds listed on 
the Sulfometuron-methyl label in actively growing Bahiagrass. Make this application only once per year. 
 
USE PRECAUTIONS: Apply these tank-mixtures only on well-established Bahiagrass where some temporary injury or 
discoloration can be tolerated. 
 
Turf Renovation 
This product controls most existing vegetation prior to renovating Turfgrass areas or establishing Turfgrass grown for 
seed or sod.

Page 90 of 143 
 
For maximum control of existing vegetation, delay planting or sodding until after determining if any regrowth of 
underground plant parts will occur. Where repeat applications are necessary, sufficient regrowth must be attained prior 
to re -application of this product. Summer or Fall application provides enhanced control of warm season grasses 
including Bermudagrass. For managed Turfgrass, apply this product after omitting at least one regular mowing to allow 
sufficient growth for good interception of the spray solution. 
 
This product has no residual soil activity and will not affect plants, seed or sod planted back into the area after 
application. 
 
A handheld sprayer may be used for spot treatment of unwanted vegetation growing in existing Turfgrass. Broadcast 
application or spot treatment using a handheld sprayer may be used to control sod remnants or other unwanted 
vegetation after sod is harvested. 
 
USE PRECAUTIONS: Do not disturb soil or underground plant parts before application of this product. Delay tillage 
and renovation techniques, including vertical mowing, coring or slicing, for at least 7 days after application to allow 
translocation of this product into underground plant parts. 
 
USE RESTRICTIONS: If application rates total 60.8 fluid ounces (1.9 qt.) of this product per acre or less, no waiting 
period between application and feeding or livestock grazing is required. If the rate is greater than 60.8 fluid ounces (1.9 
qt.) per acre, remove domestic liv estock before application and wait 8 weeks after application before grazing or 
harvesting. 
 
Chemical Mowing 
This product may be used to suppress growth of perennial and annual grasses listed in this section to serve as a 
substitute for mowing. 
 
Annual Grasses: Apply 2.5 to 4 fluid ounces of this product in 10 to 40 gallons of spray solution per acre to suppress 
growth of some annual grasses, including Annual ryegrass, Wild barley, and Wild oats when actively growing in coarse 
Turf on roadsides or other industrial areas and before the seed heads are in the boot stage of development. This 
application could injure the desired annual grasses. 
 
Perennial Grasses: Apply 4 fluid ounces of this product per acre to suppress growth of Kentucky bluegrass or 5 fluid 
ounces to suppress Canarygrass, Fine fescue, Orchardgrass, Quackgrass, Reed or Tall fescue in 10 to 40 gallons of 
spray solution per acre after grasses have greened up to at least 75% green color in the Spring or 7 to 10 days after 
mowing when sufficient regrowth has occurred to provide a desirable height for growth regulation. Use chemical mowing 
only in areas where some temporary injury or discoloration of perennial grasses can be tolerated. 
 
USE PRECAUTIONS 
Use this product for chemi cal mowing only in areas where some temporary injury or discoloration of annual and 
perennial grasses can be tolerated. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
Utility Management 
This product may be used along electrical power, pipeline and telephone rights-of-way, and on all sites associated with 
these utility rights-of-way, including substations, access roads and railroads, and along similar rights-of-way that run in 
conjunction with utilities, for spot treatment of unwanted vegetation, side trimming, trim -and-edge application around 
objects, weed control prior to planting a utility site to ornamentals, flowers or Turfgrass (sod or seed), Turf management, 
to eliminate unwanted weeds growing in established shrub or ornamental beds, to prepare or establish wildlife openings 
and for eliminating vegetation prior to or beginning construction projects. 
 
Application of this product may be repeated as needed to maintain bare ground as weeds continue to emerge up to a 
maximum application rate of 216 fluid ounces (6.75 qt.) per acre per year. 
 
TANK-MIXTURES: This product may be tank-mixed with other herbicides (examples are listed below) for use on utility 
sites. For control of herbaceous weeds, use a lower application rate or spray solution concentration within the given 
ranges for these tank -mix products and increase the rate or concentration toward the higher end of the ranges for 
control of dense stands or hard-to-control woody brush, trees and vines.

Page 91 of 143 
 
Bromacil 
Chlorsulfuron 
Clopyralid 
2,4-D 
Dicamba 
Diuron 
Fosamine 
Hexazinone 
Imazapic 
Imazapyr 
Metsulfuron-methyl 
Oryzalin 
Pendimethalin 
Prodiamine 
Sulfometuron-methyl 
Sulfosulfuron 
Triclopyr 
 
Ensure that product(s) containing Triclopyr is thoroughly mixed with water according to label directions before adding 
this product to the spray mixture. Maintain continuous agitation when adding this product to avoid tank -mix 
incompatibility problems. 
 
For enhanced results with side-trimming, apply this product in a tank-mix with Triclopyr. 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
WEEDS CONTROLLED – FORESTRY, INDUSTRIAL, UTILITY RIGHTS-OF-WAY, TURF, AND 
ORNAMENTAL SITES 
 
Always use a higher application rate or spray solution concentration of this product within a given range when weed 
growth is heavy or dense, or when weeds are growing in an undisturbed (non-cultivated) area. 
 
Poor weed control could be realized if application is made to weeds covered with dust. For weeds that have been 
mowed, grazed or cut, allow re-growth to occur prior to application of this product. 
 
Refer to the sections that follow for application rates and timing of application for the control of annual and perennial 
weeds, woody brush, trees and vines. 
 
Annual Weeds 
Annual weeds are easiest to control when they are small and actively growing. New leaf development indicates active 
growth. 
 
To control or partially control the annual weeds listed in this section when they are less than 6 inches in height or runner 
length and actively growing, apply 20 fluid ounces of this product per acre. If they are over 6 inches in height or runner 
length or slowly growing under stressed conditions, increase the application rate to 32 to 80 fluid ounces (1 to 2.5 qt.) 
per acre depending on weed height and severity of the poor growing conditions. 
 
For application using a handheld sprayer with a spray-to-wet technique, apply a 0.3% solution of this product to annual 
weeds less than 6 inches in height or runner length prior to seed head formation in grasses or bud formation in broadleaf 
weeds. 
 
To control annual weeds over 6 inches tall or even smaller weeds growing under stressed conditions, apply a 0. 6 to 
1.3% solution. Apply the maximum concentration of this product within this range to hard-to-control weeds or to control 
weeds over 24 inches tall. 
 
To control annual weeds using a handheld controlled droplet applicator (CDA), apply a 14% solution of this product (18 
fl. oz. of this product per gallon of spray solution) at a flow rate of 2 fluid ounces of spray solution per minute and a 
walking speed of 1.5 miles per hour (1 qt. of spray solution per acre). When using a vehicle-mounted CDA, apply the 
required amount of this product as indicated in this section in 2 to 15 gallons of water per acre. 
 
For enhanced control, do not mow, cut, till, burn or disturb vegetation in th e application area for at least 3 days after 
application. 
 
This product has no residual soil activity and does not control emergence of new annual weeds from seed. Subsequent 
applications of this product will be needed to control weeds that continue to emerge.

Page 92 of 143 
 
Ammania (Purple) 
Anoda (Spurred) 
Balsam apple* 
Barley 
Barley (Little) 
Barnyardgrass 
Bassia (Fivehook) 
Beggarweed (Florida) 
Bittercress 
Bluegrass (Annual) 
Bluegrass (Bulbous) 
Brome (Downy) 
Brome (Japanese) 
Broomsedge 
Buckwheat (Wild) 
Burcucumber 
Buttercup 
Carpetweed 
Castor bean** 
Cheatgrass 
Cheeseweed (Malva parviflora) 
Chervil 
Chickweed 
Cocklebur 
Copperleaf (Hophornbeam) 
Copperleaf (Virginia) 
Coreopsis (Plains/Tickseed) 
Corn 
Crabgrass 
Crowfoot grass 
Cupgrass (Woolly) 
Cutleaf evening primrose 
Dandelion (Dwarf) 
Dandelion (False) 
Devilsclaw (Unicorn plant) 
Eclipta 
Falseflax (Smallseed) 
Fiddleneck 
Filaree 
Fleabane (Annual) 
Fleabane (Hairy) (Conyza bonariensis) 
Fleabane (Rough) 
Foxtail 
Foxtail (Carolina) 
Geranium (Carolina) 
Goatgrass (Jointed) 
Goosegrass 
Groundcherry 
Groundsel (Common) 
Henbit 
Horseweed / Marestail (Conyza 
canadensis) 
Itchgrass 
Jimsonweed 
Johnsongrass (Seedling) 
Junglerice 
Knotweed 
Kochia 
Lambsquarters 
Lettuce (Prickly) 
Mannagrass (Eastern) 
Mayweed 
Medusahead 
Morningglory (Ipomoea spp.) 
Mustard (Blue) 
Mustard (Tansy) 
Mustard (Tumble) 
Mustard (Wild) 
Nightshade (Black, Hairy) 
Oats 
Oats (Wild) 
Panicum (Browntop) 
Panicum (Fall) 
Panicum (Texas) 
Pennycress (Field) 
Pepperweed (Virginia) 
Pigweed 
Puncturevine 
Purslane (Common) 
Pusley (Florida) 
Ragweed (Common) 
Ragweed (Giant) 
Rice (Red) 
Rocket (London) 
Rocket (Yellow) 
Rye 
Ryegrass 
Sandbur (Field) 
Sesbania (Hemp) 
Shattercane 
Shepherdspurse 
Sicklepod 
Signalgrass (Broadleaf) 
Smartweed (Ladysthumb) 
Smartweed (Pennsylvania) 
Sorghum (Grain) (Milo) 
Sowthistle (Annual) 
Spanish needles*** 
Speedwell (Corn) 
Speedwell (Purslane) 
Sprangletop 
Spurge (Annual) 
Spurge (Prostrate) 
Spurge (Spotted) 
Spurry (Umbrella) 
Starthistle (Yellow) 
Stinkgrass 
Sunflower 
Swinecress 
Teaweed / Prickly sida 
Thistle (Russian) 
Velvetleaf 
Waterhemp**** 
Wheat 
Witchgrass 
Wooly cupgrass 
 
 * To control Balsam apple, apply this product using handheld equipment only. 
 ** Control of Castor bean can also be achieved by injecting 4 ml of the concentrated (undiluted) product per plant into the lower 
portion of the main stem. 
 *** To control Spanish needles, apply 40 fl. oz. of this product per acre. 
**** A glyphosate-resistant biotype has been confirmed. For additional information, refer to the “WEED RESISTANCE 
MANAGEMENT” section of this label. You can also visit www.weedscience.org. 
 
Perennial Weeds 
Enhanced control of perennial weeds can be obtained when this product is applied to target weeds that are small and 
actively growing. New leaf development indicates active growth. If application must be made to larger weeds or to 
weeds that are slowly growing under stressful conditions, apply this product at a rate or spray solution concentration 
towards the upper end of the specified range. 
 
If weeds have been mowed or tilled, do not apply this product until plants have resumed active growth and have reached 
the specified stage of growth or sufficient growth has been achieved to allow for good interception of the spray solution. 
For enhanced control, do not mow, cut, till, burn or disturb vegetation in the application area for a minimum of 7 days 
after application. 
 
To control perennial weeds listed below using backpack or handheld equipment and low volume application technique, 
apply 3.1 to 6.2% solution of this product over the crown of the target plant to cover 50% of the upper plant foliage. 
 
To control perennial weeds using a handheld controlled droplet applicator (CDA), apply 14 to 28% solution of this 
product (18 to 36 fl. oz. of this product per gal. of spray solution) at a flow rate of 2 fluid ounces of spray solution per 
minute and a walking speed of 0.75 miles per hour (2 to 4 qt. of spray solution per acre). When using a vehicle-mounted 
CDA, apply the required amount of this product as indicated in the following table in 2 to 15 gallons of water per acre. 
 
Apply this product in the Fall before a killing frost. 
 
This product has no soil activity and does not control emergence of perennial weeds from seed and dormant 
underground roots, rhizomes or t ubers present in the soil at the time of application. More than one application of this 
product will be necessary for continued control of weeds that emerge following application.

Page 93 of 143 
 
Perennial Weeds Rate 
(Qt./A) 
Handheld Sprayer Concentration 
(% Solution) 
Alfalfa* 1 to 1.25 1.3 
Alligatorweed* 2.5 0.9 
Apply this product when most of the target plants are in bloom. More than one 
application will be needed to achieve control. 
Anise (Fennel) 1.25 to 2.5 0.9 to 1.3 
Bahiagrass 1.9 to 3.1 1.3 
Beachgrass (European) 
(Ammophila arenaria) 
- 3.1 
Apply 3. 1% solution of this product using a spray -to-wet technique or 7.5% solution 
using low volume application technique. Enhanced results can be obtained when 
application is made onto target weeds that are actively growing at the boot through the 
full heading stage of development. 
Apply prior to loss of more than 50% of green leaf color in the F all. Monitor application 
site and reapply this product to any target weeds that were missed, if necessary, before 
reseeding the area with desirable vegetation. 
For selective control of European beachgrass, apply 30% solution of this product during 
period of acti ve growth using a wiper applicator. Maximizing the amount of individual 
leaf tissue contacted by the wiper applicator and making a second pass in the opposite 
direction will improve control. Avoid contact of the herbicide solution with desirable 
vegetation. 
Bentgrass* 1 1.3 
This product alone will provide partial control of Bentgrass ( Agrostis spp.) only. For 
enhanced control, apply 1.5 to 2.1 qt. of this product in a tank -mix with an appropriate 
rate of C lethodim, Fluazifop-p-butyl, Fenoxaprop-p-ethyl + Fluazifop-p -butyl or 
Sethoxydim in a spray volume of 20 to 40 gal./A using broadcast application equipment. 
For enhanced control using a handheld sprayer, apply this product at a concentration of 
1.4 fl. oz./gal. of spray solution in a tank-mix with an appropriate amount of Clethodim, 
Fluazifop-p-butyl, Fenoxaprop-p-ethyl + Fluazifop-p-butyl or Sethoxydim. More than one 
application might be needed for complete control. 
Bermudagrass 3.1 1.3 
Apply when seed heads are present. 
Bermudagrass 
(Water) (Knotgrass) 
1 1.3 
Bindweed (Field) 2.5 to 3.1 1.3 
For control, apply 2.5 to 3.1 qt. of this product per acre as a broadcast application west 
of the Mississippi River and 1.9 to 2.5 qt./A east of the Mississippi River when Bindweed 
is at or beyond full bloom. For enhanced results, apply in late Summer or Fall. 
Bluegrass (Kentucky) 1.25 1.3 
Apply when most target plants have reached the boot to head stage of development. 
When application is made prior to the boot stage, reduced control can result. In the Fall, 
make application before plants have turned brown. 
Blueweed (Texas) 2.5 to 3.1 1.3 
Apply 2.5 to 3.1 qt. of this product per acre west of the Mississippi River and 2. 2 to 2.5 
qt./A east of the Mississippi River when most target plants are at or beyond full bloom. 
For enhanced results, apply in late Summer or Fall. 
Brackenfern 1.9 to 2.5 0.9 
Apply to fully expanded fronds that are at least 18 inches long. 
Bromegrass (Smooth) 1.25 1.3 
 Apply this product when most target plants have reached the boot to head stage of 
development. When application is made prior to the boot stage, reduced control can 
result. In the Fall, make application before plants have turned brown. 
Bursage (Woolyleaf) - 1.3 
Canarygrass (Reed) 1.25 to 1.9 1.3 
Apply this product when most target plants have reached the boot to head stage of 
development. When application is made prior to the boot stage, reduced control can 
result. In the Fall, make application before plants have turned brown.

Page 94 of 143 
 
Cattail 1.9 to 3.1 1.3 
Apply this product when target plants are actively growing and are at or beyond the early 
to full bloom stage of development. Enhanced results are achieved when application is 
made during the Summer or Fall months. 
Clover (Red, White) 1.9 to 3.1 1.3 
Cogongrass 1.9 to 3.1 1.3 
Apply this product in late Summer or Fall when Cogongrass is at least 18 inches tall and 
actively growing. Due to uneven stages of growth and the dense nature of Cogongrass 
vegetation, more than one application might be necessary to achieve control. 
Dallisgrass 1.9 to 3.1 1.3 
Dandelion 1.9 to 3.1 1.3 
Dock (Curly) 1.9 to 3.1 1.3 
Dogbane (Hemp) 2.5 1.3 
Apply this product when most target plants have reached the late bud to flower stage of 
growth. For enhanced results, make application in late Summer or Fall. 
Fescue (Tall) 1.9 1.3 
Apply this product when most target plants have reached the boot to head stage of 
growth. If applied prior to the boot stage, less than desirable control might be obtained. 
Fescue (except Tall) 2.5 1.3 
Guineagrass 1.9 0.9 
Apply this product when most target plants have at least reached the 7 leaf growth 
stage. 
Hogweed, Giant - - 
Inject 5 ml of a 5% solution of this product into one leaf cane per plant, 12 inches above 
the root crown.** 
Horsenettle 1.9 to 3.1 1.3 
Horseradish 2.5 1.3 
Apply this product when most target plants have reached the late bud to flower stage of 
development. For enhanced results, apply in late Summer or Fall. 
Horsetail, Field - - 
Inject 0.5 ml of this product per stem directly into the plant stem, one segment above 
the root crown.** 
Iceplant 1.25 1.3 to 1.9 
Ivy (Cape, German) 1.25 to 2.5 0.9 to 1.3 
Jerusalem artichoke 1.9 to 3.1 1.3 
Johnsongrass 1.25 to 1.9 0.9 
Apply this product when most target plants have reached the boot to head stage of 
development or before plants have turned brown in the Fall. When applied prior to the 
boot stage, reduced control can result. 
Kikuyugrass 1.25 to 1.9 1.3 
Knapweed 2.5 1.3 
Apply this product when most target plants have reached the late bud to flower stage of 
growth. For enhanced results, apply in late Summer or Fall. 
Knotweed (Bohemian, 
Giant, Japanese) 
 2.5 1.9

Page 95 of 143 
 
Apply 2.5 qt. of this product per acre as a broadcast application in 3 to 40 gallons of 
spray solution. For application using a backpack sprayer and a spray-to-wet technique, 
apply a 1.9% solution. For enhanced control, do not disturb vegetation in the application 
area for at least 7 days after application. 
Control can also be achieved by cutting stems cleanly just below the 2nd or 3rd node 
above the ground and immediately apply 0.36 fluid ounce (10 m l) of a 50% solution of 
this product in water into the ”well” or remaining internode. Ensure that the upper plant 
material that was removed is gathered and properly discarded to prevent new plants 
from propagating from sprouting buds. Use of a bio-barrier (e.g., cardboard, plywood or 
plastic sheeting) will help guard against the spread of plant material. The combined total 
application rate of this product must not exceed 5.6 qt./A.** 
Control can also be achieved by injecting 5 m l of this product per stem into the 2nd or 
3rd internode using a handheld injection device.** 
Lantana - 0.9 
Apply this product when most target plants are at or beyond the bloom stage of growth. 
Use the higher spray solution concentration on plants that have reached the woody 
stage of growth. 
Lespedeza 1.9 to 3.1 1.3 
Loosestrife (Purple) 1.65 0.9 to 1.3 
Lotus (American) 1.65 0.7 
Apply this product when most target plants are at or beyond the bloom stage of growth. 
Enhanced results can be achieved when application is made during Summer or F all 
months before a killing frost. More than one application of this product might be 
necessary to control regrowth of underground plant parts and seeds. 
Milkweed (Common) 1.9 1.3 
Apply this product when most target plants have reached the late bud to flower stage of 
growth. 
Muhyl (Wirestem) 1.25 1.3 
Make application when most target plants are at least 8 inches in height (3 to 4 leaf 
stage of development) and actively growing. 
Mullein (Common) 1.9 to 3.1 1.3 
Napiergrass 1.9 to 3.1 1.3 
Nightshade (Silverleaf) 1.25 1.3 
Apply 2.5 to 3.1 qt./A as a broadcast application west of Mississippi River and 1.9 to 2.5 
qt./A east of Mississippi River when most target plants are at or beyond full bloom. 
For enhanced results, apply in the late Summer or Fall after berries have formed. 
Nutsedge 
(Purple, Yellow) 
1.9 0.9 to 1.3 
Apply this product to control existing nutsedge plants and attached immature nutlets 
when target plants are in flower or when new nutlets can be found at rhizome tips. 
Nutlets that have not germinated will not be controlled and will require repeated 
application of this product for long term control. 
Orchardgrass 1.25 1.3 
Apply when most target plants have reached the boot to head stage of development. 
When applied prior to the boot stage, less than desirable control could be obtained. In 
the Fall, make application before plants have turned brown. 
Oriental bittersweet 1.9 1.3 
To control Oriental bittersweet, apply this product as a broadcast spray in 30 to 40 
gallons of spray solution per acre. For enhanced results, ensure complete coverage of 
the target plant with the spray solution. 
Pampasgrass 1.9 to 3.1 0.9 to 1.3 
Paragrass 1.9 to 3.1 1.3 
More than one application of this product will be needed to achieve complete control. 
Allow plants to regrow to the 7 to 10 leaf stage before making next application. 
Pepperweed (Perennial) 2.5 1.3

Page 96 of 143 
 
Phragmites* 1.9 to 3.1 0.9 to 1.3 
For partial control of Phragmites in Florida and the counties of other states bordering 
the Gulf of Mexico, apply 3.1 qt. of this product per acre as a broadcast application or a 
1.3% solution using a handheld sprayer. In other areas of the U.S., apply 1. 65 to 2. 5 
qt./A as a broadcast application or for partial control, apply a 0.7% solution using a 
handheld sprayer. For enhanced results, make application in late Summer or Fall when 
plants are actively growing and in full bloom. Due to the dense nature of this vegetation 
which can prevent good spray coverage and uneven stages of growth, more than one 
application of this product might be necessary to achieve control. Visual symptoms of 
control will be slow to develop. 
Poison hemlock 1.25 to 2.5 0.9 to 1.3 
Control can also be achieved by injecting 5 m l of a 5% solution of this product using a 
handheld injection device in one leaf cane per plant, 12 inches above the root crown.** 
Pokeweed (Common) 1 1.3 
Apply to actively growing target plants up to 24 inches tall. 
Quackgrass 1.25 to 1.9 1.3 
Apply this product when most target plants are at least 8 inches in height (3 to 4 leaf 
stage of development) and actively growing. 
Redvine* 1.25 1.3 
Reed (Common, Giant) 2.5 to 3.1 1.3 
Enhanced results can be obtained when application is made in late Summer or Fall. 
Control can also be achieved by injecting 5 m l of this product (undiluted) directly into 
the 2nd or 3rd internode using a handheld injection device.** 
Ryegrass (Perennial) 1.25 to 1.9 0.9 
Apply this product when most target plants have reached the boot to head stage of 
growth. When applied prior to the boot stage, reduced control can result. In the Fall, 
make application before Ryegrass turns brown. 
Smartweed (Swamp) 1.9 to 3.1 1.3 
Spatterdock 2.5 0.7 
Apply when most target plants are in full bloom. For enhanced results, apply in the 
Summer or Fall. 
Sowthistle (Perennial) 1.25 to 1.9 1.3 
Spurge (Leafy)* - 1.3 
Starthistle (Yellow) 1.25 1.3 
Sweet potato (Wild)* - 1.3 
Apply when most target plants are at or beyond the bloom stage of growth. More than 
one application will be needed to achieve control. 
Thistle (Artichoke) 1.25 to 1.9 0.9 to 1.3 
Apply when target plants are at or beyond the bud stage of growth. 
Thistle (Canada) 1.25 to 1.9 1.3 
Apply when target plants are at or beyond the bud stage of growth. 
Control can also be achieved by stem injection. Cut 8 to 9 of tallest plants in a clump at 
bud stage. Push a cavity needle into the stem center and then slowly remove it as you 
inject 0.5 ml of this concentrated (undiluted) product into the stem.** 
Timothy 1.25 to 1.9 1.3 
Apply when most target plants have reached the boot to head stage of development. If 
application is made prior to the boot stage, reduced control can result. In the Fall, make 
application before plants turn brown. 
Torpedograss* 2.5 to 3.1 1.3 
Trumpetcreeper* 1.25 to 1.9 1.3 
Tules (Common) - 1.3 
Apply to target plants at or beyond the seed head stage of development. Visual 
symptoms will be slow to appear and might not appear for 3 or more weeks after 
application. 
Vaseygrass 1.9 to 3.1 1.3 
Velvetgrass 1.9 to 3.1 1.3

Page 97 of 143 
 
Wheatgrass (Western) 1.25 to 1.9 1.3 
Apply when most target plants have reached the boot to head stage of development. 
Application made prior to the boot stage could result in reduced control. In the Fall, make 
application before plants turn brown. 
 * Partial control. 
** When using stem injection, the combined total use of this product must not exceed 6.75 qt./A per year. At 5 ml of 
concentrated (undiluted) product per stem, 6. 75 qt. will treat approximately 1,300 stems per acre per year. The 
number of stems that can be treated per acre will vary depending on the injection volume and the concentration 
of this product in the application solution. 
 
Woody Brush, Trees and Vines 
Unless otherwise directed, apply this product to brush and trees that are actively growing after full leaf expansion. Use 
a higher application rate or spray solution concentration within the given range for control of larger brush and trees 
and/or for application in areas of dense vegetative growth, or for the control of vines that have reached the woody stage 
of growth. 
 
Enhanced control of woody brush and trees can be obtained when application is made in late Summer or Fall after fruit 
formation. However, in arid areas, enhanced control can be obtained when application is made in the Sp ring to early 
Summer when brush and trees are at high moisture content and flowering. Poor control can be expected when this 
product is applied to drought stressed brush and trees. 
 
When applying this product using a spray-to-wet technique with a handheld sprayer to control tough woody brush and 
trees, use a 1.3% solution of this product. 
 
Some autumn color on undesirable deciduous species is acceptable when applying this product to brush and trees in 
the Fall provided no major leaf drop has occurred. Reduced performance of this product could result if application is 
made following a frost. Symptoms might not appear prior to frost or senescence following a Fall application. 
 
Repeat applications of this product might be required to control plants regenerating from underground parts or from 
seed. 
 
For enhanced results, allow 7 or more days after application before mowing, cutting, tilling, burning or removal of woody 
brush, trees and vines from that application site. Additional applications of this product will be needed to control brush 
and trees regenerating from underground parts or seed. 
 
TANK-MIXTURES: This product may be applied at any rate stated on this label in a tank -mixture other products 
(examples are listed below) to increase the spectrum of control of herbaceous weeds, woody brush, trees and vines. 
 
For control of herbaceous weeds, apply the tank -mix product at the lower end of the given application rate or spray 
solution concentration range. For control of dense stands or hard-to-control woody brush, trees and vines, increase the 
application rate or spray solution concentration of the tank-mix product towards the higher end of the range. 
 
Imazapyr Metsulfuron-methyl Triclopyr 
 
Ensure that the proper amount of product(s) containing Triclopyr is thoroughly mixed with water in the spray tank 
according to label directions before adding this product. 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
Cut Stump Application 
This product may be used to control regrowth and resprouting of woody brush and trees on any site listed on this label. 
 
Cut the woody brush or tree close to the soil surface and immediately apply a 50 to 100% (undiluted) solution of this 
product to the freshly cut surface using an applicator capable of applying this product to the entire cambium. A delay in 
application could result in reduced performance. For enhanced results, cut the woody brush or tree during period of 
active growth and full leaf expansion and apply this product. 
 
For control of the tree of heaven ( Ailanthus altissima), cut the tree close to the soil surface and immediately apply a 
50% solution of this product (16 fl . oz./qt. of solution) and an appropriate rate of I mazapyr in water to the freshly cut 
surface. 
 
DO NOT MAKE A CUT STUMP APPLICATION WHEN THE ROOTS OF DESIRABLE WOODY BRUSH OR TREES 
MIGHT BE GRAFTED TO THE ROOTS OF THE CUT STUMP, AS INJURY COULD OCCUR IN THE ADJACENT 
TREES. Some sprouts, stems, or trees can share a common root system. Adjacent trees h aving a similar age, height

Page 98 of 143 
 
and spacing could be an indicator of a shared root system. Whether grafted or shared, injury is likely to occur to adjacent 
stems or trees when this product is applied to one or more trees sharing a common root system. 
 
Woody Brush and Tree Injection and Frill Application 
This product may be used to control woody brush and trees listed in this section by injection or frill application on any 
site listed on this label. 
 
Inject or apply the equivalent of 1 milliliter (0.04 fl. oz.) of this product for every 2 to 3 inches of trunk diameter at breast 
height (DBH). If injecting this product into the woody brush or tree, use equipment capable of penetrating into the living 
plant tissue under the bark. 
 
For frill application, apply a 50 to 100% (undiluted) solution of this product in water to either a continuous frill around 
the tree or to cuts evenly spaced around the tree below all branches. As tree diameter increases, enhanced results can 
be achieved by applying this product to a conti nuous frill or to more closely spaced cuttings. Avoid application 
techniques that allow runoff of this product to occur from frilled or cut areas. In species that freely exude sap, make the 
frill or cuts at an oblique angle to produce a cupping effect and apply this concentrated product undiluted. For enhanced 
results, make this application during period of active growth and after full leaf expansion. 
 
Modified High-Volume and Low-Volume Backpack Application 
For control or partial control of listed woody brush, trees and vines when using a backpack sprayer or other handheld 
equipment and a directed low-volume foliar application technique, apply 3.1 to 6.2% solution of this product evenly over 
the plant crown to cover 50% of the upper foliage of undesirable woody brush, trees and vines. 
 
Woody brush, trees and 
vines 
Rate 
(Qt./A) 
Handheld Spray-To-Wet 
Concentration 
(% Solution) 
Alder 1.9 to 2.5 0.9 
Ash* 1.25 to 3.1 0.9 to 1.3 
Aspen (Quaking) 1.25 to 1.9 0.9 
Bearmat (Bearclover)* 1.25 to 3.1 0.9 to 1.3 
Beech* 1.25 to 3.1 0.9 to 1.3 
Birch 1.25 to 1.9 0.9 
Blackberry 1.9 to 2.5 0.9 
Blackgum 1.25 to 3.1 0.9 to 1.3 
Bracken 1.25 to 3.1 0.9 to 1.3 
Broom (French, Scotch) 1.25 to 3.1 0.9 to 1.3 
Buckwheat (California)* 1.25 to 2.5 0.9 to 1.3 
Cascara* 1.25 to 3.1 0.9 to 1.3 
Castor bean - - 
For control, inject 4 ml of this product (undiluted) per plant directly into the lower 
portion of the main stem using a handheld injection device.** 
Catsclaw* - 0.9 
For partial control, apply this product when at least 50% of the new leaves are fully 
developed. 
Ceanothus* 1.25 to 3.1 0.9 to 1.3 
Chamise* 1.25 to 3.1 0.9 
Cherry (Bitter, Black, Pin) 1.25 to 1.9 0.9 
Coyote brush 1.9 to 2.5 0.9 to 1.3 
For control, apply this product when at least 50% of the new leaves are fully 
developed. 
Deerweed 1.25 to 3.1 0.9 
Dogwood* 1.25 to 3.1 0.9 to 1.3 
Elderberry 1.25 to 1.9 0.9 
Elm* 1.25 to 3.1 0.9 to 1.3 
Eucalyptus - 1.3 
To control Eucalyptus resprouts, apply this product using a handheld sprayer when 
resprouts are 6 to 12 feet tall. Ensure complete coverage.

Page 99 of 143 
 
Florida holly 
(Brazilian peppertree)* 
1.25 to 3.1 0.9 to 1.3 
Gallberry 1.25 to 3.1 0.9 to 1.3 
Gorse* 1.25 to 3.1 0.9 to 1.3 
Hackberry (Western) 1.25 to 3.1 0.9 to 1.3 
Hasardia* 1.25 to 2.5 0.9 to 1.3 
Hawthorn 1.25 to 1.9 0.9 
Hazel 1.25 to 1.9 0.9 
Hickory* 1.25 to 3.1 0.9 to 1.3 
Honeysuckle 1.9 to 2.5 0.9 
Hornbeam (American)* 1.25 to 3.1 0.9 to 1.3 
Kudzu 2.5 to 3.1 1.3 
Locust (Black)* 1.25 to 2.5 0.9 to 1.3 
Madrone (Resprouts)* - 1.3 
Manzanita* 1.25 to 3.1 0.9 to 1.3 
Maple (Red) 1.25 to 2.5 0.9 
For control, apply a 0.9% solution of this product using a handheld sprayer when 
leaves are fully developed. For partial control, apply 1.25 to 2.5 qt./A as a broadcast 
application. 
Maple (Sugar) - 0.9 
For control, apply this product using a handheld sprayer when at least 50% of the 
new leaves are fully developed. 
Maple (Vine)* 1.25 to 3.1 0.9 
Monkey flower* 1.25 to 2.5 0.9 to 1.3 
Oak (Black, White)* 1.25 to 2.5 0.9 to 1.3 
Oak (Northern, Pin) 1.25 to 2.5 0.9 
For control, apply this product when at least 50% of the new leaves are fully 
developed. 
Oak (Poison) 2.5 to 3.1 1.3 
Repeat application may be needed to maintain control. Make Fall applications 
before leaves lose green color. 
Oak (Post) 1.9 to 2.5 0.9 
Oak (Red) - 0.9 
For control, apply this product using a handheld sprayer when at least 50% of the 
new leaves are fully developed. 
Oak (Scrub)* 1.25 to 2.5 0.9 
Oak (Southern red) 1.25 to 1.9 0.9 
Orange (Osage) 1.1 to 3.1 0.9 to 1.3 
Persimmon* 1.25 to 3.1 0.9 to 1.3 
Pine 1.25 to 3.1 0.9 to 1.3 
Poison ivy 2.5 to 3.1 1.3 
Poplar (Yellow)* 1.25 to 3.1 0.9 to 1.3 
Redbud (Eastern) 1.25 to 3.1 0.9 to 1.3 
Rose (Multiflora) 1.25 0.9 
Make application prior to leaf deterioration caused by leaf feeding insects. 
Russian olive* 1.25 to 3.1 0.9 to 1.3 
Sage (Black) 1.25 to 2.5 0.9 
Sage (White)* 1.25 to 2.5 0.9 to 1.3 
Sage brush (California) 1.25 to 2.5 0.9 
Salmonberry 1.25 to 1.9 0.9

Page 100 of 143 
 
Saltcedar* 1.25 to 3.1 0.9 to 1.3 
For partial control, apply 0.9 to 1. 3% solution of this product using a handheld 
sprayer or 1. 25 to 3. 1 qt./A as a broadcast application. For control, apply 0.9 to 
1.3% solution of this product in a tank -mix with Imazapyr herbicide using a 
handheld sprayer. 
For control using broadcast application, apply 1.25 qt. of this product per acre in a 
tank-mix with an appropriate rate of Imazapyr to plants less than 6 feet tall. To 
control Saltcedar greater than 6 feet tall using broadcast application, apply 2.6 qt./A 
of this product in a tank-mix with a higher rate of Imazapyr. 
Sassafras* 1.25 to 3.1 0.9 to 1.3 
Sourwood* 1.25 to 3.1 0.9 to 1.3 
Sumac (Laurel, Poison, 
Smooth, Sugarbush, 
Winged)* 
1.25 to 2.5 0.9 to 1.3 
Sweetgum 1.25 to 1.9 0.9 
Swordfern* 1.25 to 3.1 0.9 to 1.3 
Tallowtree (Chinese) - 0.9 
Tan oak (Resprouts)* - 1.3 
Thimbleberry 1.25 to 1.9 0.9 
Tobacco (Tree)* 1.25 to 2.5 0.9 to 1.3 
Toyon* - 1.3 
Trumpetcreeper 1.25 to 1.9 0.9 
Vine maple* 1.25 to 3.1 0.9 to 1.3 
Virginia creeper 1.25 to 3.1 0.9 to 1.3 
Waxmyrtle (Southern)* 1.25 to 3.1 0.9 to 1.3 
Willow 1.9 to 2.5 0.9 
Yerba santa* - 1.3 
*Partial control 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac)

Page 101 of 143 
 
 
WARRANTY—CONDITIONS OF SALE 
OUR DIRECTIONS FOR USE of this product are based upon tests believed reliable. Follow directions carefully. Timing 
and method of application, weather and crop conditions, mixture with other chemicals not specifically directed and other 
influencing factors in the use of this product are beyond the control of the Seller. To the extent consistent with applicable 
laws, Buyer assumes all risks of use, storage and handling of this material not in strict accordance with directions given 
herewith. To the extent con sistent with applicable laws, in no case shall the Manufacturer or the Seller be liable for 
consequential, special or indirect damages resulting from the use or handling of this product when such use and/or 
handling is not in strict accordance with directi ons given herewith. To the extent consistent with applicable law, t he 
foregoing is a condition of sale by the Seller and is accepted as such by the Buyer. 
 
 
 
 Manufactured By: 
 
 
 
 
 
 
 
DUPLIKATOR and the DREXEL logo are registered trademarks of Drexel Chemical Company. Roundup Ready and TruFlex are either 
trademarks or registered trademarks of Monsanto Technology LLC. All other brand names, product names or trademarks belong to 
their respective holders. 
 
 
 
 
 
 
 
STORAGE AND DISPOSAL 
Do not contaminate water, food or feed by storage or disposal. 
PESTICIDE STORAGE: Store in original container. Keep container tightly closed. Keep away from heat and flame. 
PESTICIDE DISPOSAL: To avoid waste, use all materials in this container by application according to label 
directions. If wastes cannot be avoided, offer remaining product to a waste disposal facility or pesticide disposal 
program (often, such programs are run by State or local governments or by industry). 
CONTAINER HANDLING: 
Nonrefillable Container (rigid material; < 5 gallons): Nonrefillable container. Do not reuse or refill this container. 
Clean container promptly after emptying. Triple rinse as follows: Empty the remaining contents into application 
equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container one-fourth full with 
water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for 
later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Offer 
for recycling, if available, or dispose of empty container in a sanitary landfill or by or by other procedures allowed by 
state and local authorities. 
Nonrefillable Container (rigid material; > 5 gallons up to < 250 gallons): Nonrefillable container. Do not reuse 
or refill this container. Clean container promptly after emptying. Triple rinse as follows: Empty the remaining contents 
into application equipment or a mix tank. Fill the container one-fourth full with water. Replace and tighten c losures. 
Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand 
the container on its end and tip it back and forth several times. Turn the container over onto its other end and tip it 
back and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use 
or disposal. Repeat this procedure two more times. Offer for recycling, if available, or dispose of empty container in 
a sanitary landfill or by or by other procedures allowed by state and local authorities. 
Refillable Container (> 250 gallons & Bulk): Refillable container. Refill this container with pesticide only. Do not 
reuse this container for any other purpose. Cleaning the container before final disposal is the responsibility of the 
person disposing of the container. Cleaning before refilling is the responsibility of the refiller. To clean the container 
before final disposal, empty the remaining contents from this container into application equipment or mix tank. Fill 
the container about 10% full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or 
pump rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times. 
Offer for recycling, if available, or dispose of empty container in a sanitary landfill or by or by other procedures 
allowed by state and local authorities.

Page 102 of 143 
 
OPTIONAL MARKETING STATEMENTS: 
• Contains 4.8 pounds glyphosate acid 
• Weed and (&) Grass Killer 
• Grass Killer 
• Herbicide for Glyphosate resistant and other listed Glyphosate Tolerant Crops 
• A (complete) broad spectrum post-emergence herbicide for weed control in many agricultural systems. 
• Selective broad spectrum weed control in Glyphosate resistant and other listed Glyphosate Tolerant Crops. 
• A (complete) broad spectrum post -emergence herbicide for forestry, industrial, roadside, turf , ornamental, utili ty 
rights-of-way, and other listed terrestrial weed control. 
• The broad spectrum post-emergence herbicide for agricultural, industrial, turf, and ornamental weed control. 
• Selective broad spectrum weed control in Glyphosate resistant crops including Flex cotton. 
• Selective broad spectrum weed control in Glyphosate resistant Crops 
• Approved for Glyphosate resistant crops, including Flex cotton and other listed Glyphosate tolerant crops. 
• For use in Glyphosate resistant Flex Cotton 
• For use in TruFlexTM Canola with Glyphosate resistant Technology 
• Herbicide for Glyphosate resistant Crops including Glyphosate resistant Flex Cotton and TruFlex TM Canola with 
Glyphosate resistant Technology 
• For use in Glyphosate resistant Flex Cotton and TruFlexTM Canola with Glyphosate resistant Technology 
• Non-selective broad spectrum weed control for many agricultural systems and farmsteads. 
• Non-selective, broad spectrum weed control for many cropping systems, farmsteads, and conservation reserve 
program acres 
• For use in crop ping systems, including Glyphosate resistant Alfalfa, Canola, Corn, Cotton, Soybeans , and Sugar 
beets. 
• For reduced tillage and fallow systems. 
• Complete broad spectrum post-emergence herbicide for vegetation management, ornamental weed control, and 
non-planted areas around residential, industrial locations, and their immediate vicinities. 
• For residential use 
• For industrial and institutional use 
• Controls many annual and perennial grasses and broadleaf weeds as listed.

Page 103 of 143 
 
 
[SUB-LABEL 2: FORESTRY, INDUSTRIAL, UTILITY RIGHTS-OF-WAY, TURF & ORNAMENTAL 
SITES] 
 
 
 
 
 
 
 
 
 
Non-selective, broad spectrum weed control in forestry, industrial, utility rights-of-way, turf and ornamental 
sites. 
 
ACTIVE INGREDIENT: 
 Glyphosate in the form of its potassium salt*................................................................................. 51.2% 
OTHER INGREDIENTS: ………………………………………………………………………………. 48.8% 
 TOTAL: ........................................................................................................................................100.0% 
* This product contains 5.88 pounds per U.S. gallon of glyphosate in the form of its potassium salt equivalent to 4.8 pounds per U.S. 
gallon of glyphosate acid. 
 
KEEP OUT OF REACH OF CHILDREN 
CAUTION 
(See FIRST AID Below) 
(See Side (Back) Panel for FIRST AID); (See Page ___ for FIRST AID) 
(See Container Labeling for (FIRST AID and) Complete Directions for Use) 
(See (Attached) Booklet (Container Labeling) for Complete Directions for Use) 
 
EPA Reg. No. 19713-723 
EPA Est. No. 19713-XX-XXX Net Content: (_____Gal.) (____L) (____Qt.) (____Fl. Oz.) 
FIRST AID 
IF IN EYES: 
• Hold eye open and rinse slowly and gently with water for 15 to 20 minutes. 
• Remove contact lenses, if present, after the first 5 minutes then continue rinsing eye. 
Call a poison control center or doctor for treatment advice. 
Have the product container or label with you when calling a poison control center or doctor or going for treatment. 
You may also call CHEMTREC at 800-424-9300 for emergency medical treatment information. 
 
Domestic Animals: This product is considered to be relatively nontoxic to dogs and other domestic animals; 
however, ingestion of this product or large amounts of freshly sprayed vegetation may result in temporary 
gastrointestinal irritation (vomiting, diarrhea, colic, etc.). If such symptoms are observed, provide the animal with plenty 
of fluids to prevent dehydration. Call a veterinarian if symptoms persist for more than 24 hours. 
 
 
 
KMaxSP2-0221*P 
 
GLYPHOSATE GROUP 9 HERBICIDE 
Duplikator® K-MAX 
 Herbicide

Page 104 of 143 
 
PRECAUTIONARY STATEMENTS 
Hazards to Humans and Domestic Animals 
CAUTION: Causes moderate eye irritation. Avoid contact with eyes, skin or clothing. 
PERSONAL PROTECTIVE EQUIPMENT (PPE) 
Applicators and other handlers must wear: Long-sleeved shirt, long pants, shoes plus socks. 
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use 
detergent and hot water. Keep and wash PPE separately from other laundry. 
ENGINEERING CONTROLS 
When handlers use closed systems, enclosed cabs or aircraft in a manner that meets the requirements listed in the 
Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4- 6)], the handler PPE 
requirements may be reduced or modified as specified in the WPS. Important: When reduced PPE is worn 
because a closed system is being used, handlers must be provided all PPE specified above for applicators and other 
handlers and have such PPE immediately available for use in an emergency such as a spill or equipment breakdown. 
 
USER SAFETY RECOMMENDATIONS 
Users should: 1) Wash hands thoroughly with soap and water after handling and before eating, drinking, chewing 
gum, using tobacco or using the toilet. 2) Remove clothing/PPE immediately if pesticide gets inside. Then wash 
thoroughly and put on clean clothing. 
 
ENVIRONMENTAL HAZARDS 
Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the 
mean high water mark. Do not contaminate water when disposing of equipment washwater or rinsate. 
 
PHYSICAL AND CHEMICAL HAZARDS 
Spray solutions of this product may be mixed, stored and applied using stainless steel, fiberglass, plastic or plastic -
lined steel containers. DO NOT MIX, STORE OR APPLY THIS PRODUCT OR SPRAY SOLUTIONS OF THIS 
PRODUCT IN GALVANIZED STEEL OR UNLINED STEEL (EXCEPT STAINLESS STEEL) CONTAINERS OR SPRAY 
TANKS. This product or spray solutions of this product react with such containers and tanks to produce hydrogen gas 
which can form a highly combustible gas mixture. This gas mixture could flash or explode if ignited by open flame, 
spark, welder's torch, lighted cigarette or other ignition source causing serious personal injury. 
 
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. This product can only be 
used in accordance with the directions for use on this label or in separately published supplemental labeling. Do not 
apply this produ ct in a way that will contact workers or other persons, either directly or through drift. Only protected 
handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency 
responsible for pesticide regulation. 
 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard (WPS), 40 CFR Part 
170. This standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, 
greenhouses and handlers of agricultural pesticides. It contains requirements for training, decontamination, 
notification and emergency assistance. It also contains specific instructions and exceptions pertaining to the 
statements on this label a bout personal protective equipment (PPE) and restricted entry interval (REI). The 
requirements in this box only apply to uses of this product that are covered by the WPS. 
Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 4 hours. 
PPE required for early entry to treated areas that is permitted under the WPS and that involves contact with anything 
that has been treated, such as plants, soil or water is: Coveralls, chemical-resistant gloves, shoes plus socks and 
protective eyewear. 
 
NON-AGRICULTURAL USE REQUIREMENTS 
The requirements in this box apply to uses of this product that are NOT within the scope of the Worker Protection 
Standard, 40 CFR Part 170. The WPS applies when this product is used to produce agricultural plants on farms , 
forests, nurseries, and greenhouses. 
Do not enter treated areas until sprays have dried.

Page 105 of 143 
 
PRODUCT INFORMATION 
READ ENTIRE LABEL BEFORE USING THIS PRODUCT. 
DO NOT APPLY THIS PRODUCT USING AERIAL SPRAY EQUIPMENT EXCEPT UNDER CONDITIONS AS 
SPECIFIED WITHIN THIS LABEL. 
 
Product Description: This product is a post-emergence systemic herbicide with no soil residual activity. It is generally 
non-selective and gives broad spectrum control of many annual and perennial weeds, woody brush, trees and vines. It 
is formulated as a water soluble liquid and may be applied using most standard industrial or field sprayers after dilution 
and thorough mixing with water or other carriers according to label directions. 
 
Mode of Action: The active ingredient in this product inhibits an enzyme found only in plants and microorganisms that 
is essential to the formation of specific amino acids. 
 
Soil Activity: This product has NO soil activity. This product binds tightly to soil particles and does not provide residual 
weed control. Weeds must be emerged at the time of application to be controlled by foliar application of this product. 
Weed seeds in the soil will not be affected by this product and will continue to germinate. Unattached plant rhizomes 
or rootstocks beneath the soil surface will not be affected by this product. 
 
Degradation: Degradation of this product is primarily a biological process carried out by soil microbes. 
 
Time to Symptoms: This product moves through the plant from the point of foliage contact to and into the root system. 
Visible effects are gradual wilting and yellowing of the plant that advances to complete browning of above ground 
growth and deterioration of underground plant parts . Effects are visible on most annual weeds within 2 to 4 days but 
on most perennial weeds , effects might not be visible for 7 or more days after application. Extremely cool or cloudy 
weather following application could slow activity of this product and delay development of visual symptoms. 
 
Stage of Weeds: Annual weeds are easiest to control when they are small. Enhanced control of most perennial weeds 
is obtained when this product is applied at late growth stages approaching maturity . Refer to the “WEEDS 
CONTROLLED” section for more information on controlling specific weeds. 
 
Cultural Considerations: Reduced weed control could result when this product is applied to annual or perennial weeds 
that have been mowed grazed or cut and have not been allowed to regrow to the specified stage prior to application. 
 
Always use the higher specified application rate when weed growth is heavy or dense or when weeds are growing in 
an undisturbed (non-cultivated area). 
 
Reduced weed control could result when this product is applied to weeds that show signs of disease or insect damage, 
are heavily covered with dust or are surviving under poor growing conditions. 
 
Rainfastness: Rainfall within 4 hours of application could wash this product off the foliage, thus, a second application 
might be needed for adequate control. 
 
Spray Coverage: For enhanced results, spray coverage must be uniform and complete. Do not spray foliage to the 
point of runoff. 
 
Maximum Application Rates: The maximum application rates stated throughout this label are given in units of volume 
(fl. oz. or qt.) of this product per acre. However, the maximum allowed application rates apply to this product combined 
with the use of any and all other herbicides c ontaining the active ingredient glyphosate whether applied separately or 
in a tank -mixture on a basis of total pounds of glyphosate (acid equivalent) per acre. If more than one glyphosate 
containing product is applied to the same site within the same year , ensure that the total use of glyphosate ( lb. acid 
equivalent) does not exceed the maximum allowed. See the “INGREDIENTS” section of this label for necessary product 
information. 
 
Except otherwise specified in a crop section of this label , the combined total application of this product on a site must 
not exceed 160 fluid ounces ( 5 qt.) equivalent to 6 pounds of glyphosate acid per acre per year . For applications on 
non- crop sites or on tree vine or shrub crop production sites , the combined total application of this product must not 
exceed 216 fluid ounces (6.75 qt.) equivalent to 8 pounds of glyphosate acid per acre per year. 
 
WEED RESISTANCE MANAGEMENT 
GLYPHOSATE GROUP 9 HERBICIDE 
For resistance management, this product is a Group 9 mode of action herbicide. Any weed population may contain or 
develop plants naturally resistant to this product and other Group 9 mode of action herbicides. The resistant biotypes 
may dominate the weed population if these herbicides are used repeatedly in the same field. Appropriate resistance 
management strategies should be followed.

Page 106 of 143 
 
To delay herbicide resistance, take one or more of the following steps: 
• Rotate the use of this product or other Group 9 herbicides within a growing season sequence or among growing 
seasons with different herbicide groups that control the same weeds in a field. 
• Use tank mixtures with herbicides from a different group if such use is permitted; where information on resistance in 
target weed species is available, use the less resistance- prone partner at a rate that will control the target weed(s) 
equally as well as the more resistance-prone partner. Consult your local extension service or certified crop advisor if 
you are unsure as to which active ingredient is currently less prone to resistance. 
• Adopt an integrated weed-management program for herbicide use that includes scouting and uses historical 
information related to herbicide use and crop rotation, and that considers tillage (or other mechanical control 
methods), cultural ( e.g., higher crop seeding rates; precision fertilizer application method and timing to favor the crop 
and not the weeds), biological (weed-competitive crops or varieties) and other management practices. 
• Scout before and after herbicide application to monitor weed populations for early signs of resistance development. 
Indicators of possible herbicide resistance include: (1) failure to control a weed species normally controlled by the 
herbicide at the dose applied, especially if control is achieved on adjacent weeds; (2) a spreading patch of non-
controlled plants of a particular weed species; (3) surviving plants mixed with controlled individuals of the same 
species. If resistance is suspected, p revent weed seed production in the affected area by an alternative herbicide 
from a different group or by a mechanical method including hoeing or tillage. Prevent movement of resistant weed 
seeds to other fields by cleaning harvesting and tillage equipment when moving between fields, and planting clean 
seed. 
• If a weed pest population continues to progress after treatment with this product, discontinue use of this product, and 
switch to another management strategy or herbicide with a different mode of action, if available. 
• Contact your local extension specialist or certified crop advisors for additional pesticide resistance- management 
and/or integrated weed-management directions for specific crops and weed biotypes. 
• For further information or to report suspected resistance, contact Drexel Chemical Company representatives at (901) 
774-4370. 
 
Manage weed seed at and after harvest to prevent buildup of the weed seed bank. 
 
To determine if resistance in any particular weed biotype has been confirmed in your area, visit the internet at 
www.weedscience.org. 
 
MIXING 
Spray solutions of this product may be mixed, stored, and applied using clean stainless steel fiberglass, plastic or 
plastic lined steel containers. 
 
DO NOT MIX STORE OR APPLY THIS PRODUCT OR SPRAY SOLUTIONS OF THIS PRODUCT IN GALVANIZED 
STEEL OR UNLINED STEEL (EXCEPT STAINLESS STEEL) CONTAINERS OR SPRAY TANKS. 
 
Eliminate any risk of siphoning the contents of the tank back into the carrier source while mixing. Use approved anti- 
back siphoning devices where required by State or local regulations. 
 
A 50 mesh nozzle screen or line strainer on the spray equipment is sufficient. 
 
Clean sprayer parts promptly after using this product by thoroughly flushing with water. 
 
Mixing with Water 
This product mixes readily with water. Mix spray solutions of this product as follows: 
Fill the mixing or spray tank with the required amount of water. Add the specified amount of this product near the end 
of the filling process and mix well. During mixing, foaming of the spray solution may occur. To prevent or minimize 
foaming, mix gently, terminate by-pass and return lines at the bottom of the tank , and if needed, use an appropriate 
antifoam or defoaming agent. 
 
PERFORMANCE OF THIS PRODUCT CAN BE SIGNIFICANTLY REDUCED IF WATER CONTAINING SOIL 
SEDIMENT IS USED AS CARRIER. DO NOT MIX THIS PRODUCT WITH WATER FROM PONDS OR DITCHES 
THAT IS VISIBLY MUDDY OR MURKY. 
 
Tank-Mixtures 
This product does not provide residual weed control. This product may be tank-mixed with other herbicides to provide 
residual weed control, broader weed control spectrum or an alternate mode of action. It is the pesticide user’s 
responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions 
and limitations and directions for use on all product labels involved in tank-mixing. Users must follow the most restrictive 
directions for use and precautionary statements of each product in the tank-mixture.

Page 107 of 143 
 
Some tank-mix products have the potential to cause crop injury under certain conditions at certain growth stages and/or 
under other circumstances Read the label of all products to be used in the tank -mixture prior to use to determine the 
potential for crop injury. 
 
Tank-mixtures with other pesticides, micronutrients or foliar fertilizers could result in reduced weed control or crop injury. 
Manufacturer has not tested all tank-mix products for compatibility, antagonism or reduction in product performance. 
 
When a tank -mix with a generic active ingre dient including Atrazine, 2,4-D, Dicamba, Diuron, Pendimethalin or any 
other product or material is listed on this label , it is the pesticide user’s responsibility to ensure that all products are 
registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all 
product labels involved in tank -mixing. Users must follow the most restrictive directions for use and precautionary 
statements of each product in the tank-mixture. 
 
For enhanced results apply tank -mixtures with this product at a minimum spray volume rate of 10 gallons per acre , 
unless otherwise specified. 
 
Tank-Mixing Procedure 
If compatibility of the tank-mixture product(s) is not known, predetermine the compatibility in the carrier by mixing small 
proportional quantities in advance. 
Mix only the quantity of spray solution that will be applied that day. Application of tank-mix solutions that were allowed 
to stand overnight could result in reduced weed control. 
Prepare the tank-mixtures of this product as follows: 
1. Place a 20 to 35 mesh screen or wetting basket over filling port of the tank. 
2. Through the screen, fill the spray tank one-half full with water and start agitation. 
3. If ammonium sulfate is used, add it slowly through the screen into the tank. If dry ammonium sulfate is being used, 
ensure that it is completely dissolved in the tank before adding other products. 
4. If a wettable powder is used, make a slurry with the water carrier, and add it SLOWLY through the screen into the 
tank. Continue gentle agitation. 
5. If a flowable formulation is used, premix one part flowable with one part water. Add diluted mixture SLOWLY through 
the screen into the tank. Continue gentle agitation. 
6. If an emulsif iable concentrate formulation is used, premix one part emulsifiable concentrate with two parts water. 
Add diluted mixture slowly through the screen into the tank. Continue gentle agitation. 
7. Continue filling the spray tank with water and add the required amount of this product near the end of the filling 
process. 
8. [Optional label statement: If a nonionic surfactant is used, add it to the tank before completing the filling 
process.] 
9. Add individual formulations to the spray tank as follows: wettable powder, flowable s, emulsifiable concentrate, drift 
reduction additive and water soluble liquid (this product) (optional text: ,surfactant). 
 
Maintain gentle agitation at all times until the contents of the tank are sprayed. If the spray mixture is allowed to settle, 
agitate thorough to resuspend the mixture before spraying is resumed. 
 
Keep by-pass line on or near the bottom of the tank to minimize foaming. 
 
A 50 mesh nozzle screen or line strainer on the spray equipment is sufficient. 
 
Mixing Spray Solution Concentrations 
All reference throughout this label to concentration of this product in a spray solution is on a percentage of volume 
basis. 
Prepare the desired volume of spray solution by mixing the amount of this product in water as shown in the following 
table: 
 
SPRAY SOLUTION 
Desired 
Volume 
Amount of This Product 
0.3% 0.6% 0.9% 1.3% 3.1% 6.2% 
1 gal. 0.4 fl. oz. 0.8 fl. oz. 1.2 fl. oz. 1.7 fl. oz. 4 fl. oz. 8 fl. oz. 
25 gal. 10 fl. oz. 0.6 qt. 0.9 qt. 1.3 qt. 3.1 qt. 6.2 qt. 
100 gal. 1.2 qt. 2.4 qt. 3.6 qt. 1.3 gal. 3.1 gal. 6.2 gal. 
2 tablespoons = 1 fluid ounce (fl. oz.) 
 
For use in backpack and pump-up sprayers, consider mixing the specified amount of this product with water in larger 
container and then filling the sprayer from the larger container.

Page 108 of 143 
 
 
[Optional Section: Surfactants 
Although not always required, surfactant may be added to spray solutions of this product. However, additional surfactant 
can increase the performance of this product at water carrier volumes above 30 gallons per acre or at application rates 
below 15 fluid ounces of product per acre. 
 
Nonionic surfactants that are labeled for use w ith herbicides may be used. Do not reduce rates of this product when 
adding surfactant. Use a surfactant concentration of 0.25 to 0.5% (1 to 2 qt./100 gal. of spray solution) when adding 
surfactant that contains at least 70% active ingredient or 1% surfactant concentration (4 qt./100 gal. of spray solution) 
when adding surfactant that contains less than 70% active ingredient. Read and carefully observe all precautionary 
statements and other information on the surfactant label. 
 
[Optional label text: DO NOT add buffering agents or pH adjusting agents to the spray solution when this product is 
the only pesticide product being applied.] 
 
DO NOT ADD ADDITIONAL SURFACTANT OR ADDITIVES CONTAINING SURFACTANT TO THIS PRODUCT FOR 
PRE-HARVEST APPLICATION TO COTTON OR ANY POST- EMERGENCE (IN- CROP) APPLICATION TO LISTED 
GLYPHOSATE TOLERANT COTTON VARIETIES.] 
 
Ammonium Sulfate 
Unless otherwise directed, the addition of 1 to 2 % dry ammonium sulfate by weight or 8.5 to 17 pounds per 100 gallons 
of water may increase the performance of this product particularly under hard water conditions, drought conditions or 
when tank-mixed with certain residual herbicide s on annual and perennial weeds. An equivalent rate of ammonium 
sulfate in liquid formulation may also be used. Ensure that dry ammonium sulfate is completely dissolved in the spray 
tank before adding herbicides. Thoroughly rinse the spray system with clean water after use to reduce corrosion. 
 
Note: When using ammonium sulfate, apply this product at rates specified in this label. Lower rates will result in 
reduced performance. 
 
Colorants or Dyes 
Colorants or marking dyes may be added to spray solutions of this product, however, they may reduce performance of 
this product. Use colorants or dyes according to the manufacturer's directions. 
 
Drift Reduction Additives 
Drift reduction additives may be used with all equipment types, except wiper applicators, sponge bars and Controlled 
Droplet Applicator (CDA) equipment. When a drift reduction additive is used, read and carefully observe the 
precautionary statements and all other information appearing on the additive label. The use of drift reduction additives 
can affect spray coverage which could result in reduced performance of this product. 
 
APPLICATION EQUIPMENT AND TECHNIQUES 
This product may be applied using the following application equipment: 
 
Aerial Application Equipment—Fixed Wing and Helicopter [Alternative text: Helicopter only] [Optional Text: Aerial 
application allowed by helicopter only in (the following:) [list areas that allow aerial application by helicopter only , if 
applicable] 
 
Ground Application Equipment— Boom or boomless systems, pull -type sprayer s, floaters, pick -up sprayers, 
spray coupes, and other ground broadcast application equipment. 
 
Handheld and Backpack Sprayers—Knapsack and backpack sprayers, pump-up pressure sprayers, handguns, 
handwands, mistblowers*, lances, and other handheld and motorized spray equipment used to direct the spray onto 
weed foliage. 
*This product is not registered in California or Arizona for use in mistblowers. 
 
Selective Application Equipment—Recirculating sprayers, shielded and hooded sprayers, wiper applicators, and 
sponge bars. 
 
Injection Systems—Aerial or ground injection sprayers. 
 
Controlled Droplet Applicator (CDA) —Handheld or boom -mounted applicators that produce a spray pattern 
consisting of a narrow range of droplet sizes.

Page 109 of 143 
 
APPLY THIS PRODUCT IN PROPERLY MAINTAINED AND CALIBRATED EQUIPMENT CAPABLE OF DELIVERING 
DESIRED VOLUMES. 
 
Do not apply this product through any type of irrigation system. 
 
SPRAY DRIFT MANAGEMENT 
AVOID CONTACT OF THIS HERBICIDE WITH FOLIAGE, [Optional text: GREEN] STEMS, EXPOSED NON-WOODY 
ROOTS OR FRUIT OF CROPS, DESIRABLE PLANTS AND TREES, [Optional text, if applicable: EXCEPT AS 
DIRECTED FOR USE ON GLYPHOSATE RESISTANT AND OTHER LISTED GLYPHOSATE TOLERANT CROPS,] 
AS SEVERE PLANT INJURY OR DESTRUCTION COULD RESULT. 
Do not allow the herbicide solution to mist, drip, drift or splash onto desirable vegetation, as small quantities of this 
product can cause severe damage or destruction to the crop, plant s or other vegetation on which application was not 
intended. 
AVOID DRIFT. USE EXTREME CARE TO PREVENT INJURY TO DESIRABLE PLANTS AND CROPS WHEN 
APPLYING THIS PRODUCT. 
Avoiding spray drift at the application site is the responsibility of the applicator. The interaction of many equipment and 
weather-related factors determines the potential for spray drift. The applicator and grower are responsible for 
considering all these factors when making decisions regarding the application of this product. 
The likelihood of injury occurring as the result of spray drift while applying this product increases when winds are gusty, 
as wind velocity increases, when wind direction is constantly changing or when there are other meteorological 
conditions that favor spray drift. W hen spraying, avoid combinations of pressure and nozzle type that will result in 
splatter or generation of fine particles (mist) that are likely to drift. 
TO PREVENT INJURY TO ADJACENT DESIRABLE VEGETATION, APPROPRIATE BUFFERS MUST BE 
MAINTAINED. 
AVOID APPLYING THIS PRODUCT AT EXCESSIVE SPEED OR SPRAYER PRESSURE. 
AERIAL APPLICATION EQUIPMENT 
Unless otherwise prohibited, all applications of this product described on this label may be made using aerial application 
equipment where appropriate provided that the applicator complies with the precautions and restrictions specified on 
this label and on separate supplemental labeling published for this product. 
 
DO NOT APPLY THIS PRODUCT USING AERIAL APPLICATION EQUIPMENT EXCEPT UNDER CONDITIONS 
SPECIFIED ON THIS LABEL OR ON SEPARATELY PUBLISHED SUPPLEMENTAL LABELING FOR THIS 
PRODUCT. 
[Optional voluntary label restriction] 
(Aerial application of this product may be made using helicopters only.) 
(Aerial application of this product may be made by helicopters only in (the following:) [List areas where aerial application 
is permitted by helicopter only, if applicable.] 
 
FOR SPECIFIC USE INSTRUCTIONS, RESTRICTIONS AND REQUIREMENTS IN CALIFORNIA, REFER TO THE 
SECTIONS “AERIAL APPLICATION IN CALIFORNIA INCLUDING FRESNO COUNTRY”. 
 
Apply the specified rates of this product in 3 to 25 gallons per acre by air unless otherwise directed. Use a larger spray 
volume within this range where weeds, brush, trees and vines are dense or form multiple canopy layers. Avoid direct 
application to any body of water. 
 
Drift control additives may be used. 
 
Ensure uniform application — To avoid streaked, uneven or overlapped application, use appropriate marking devices. 
 
Aircraft Maintenance: Thoroughly wash aircraft, especially landing gear, after each day of spraying to remove 
residues of this product accumulated during spraying or from spills. PROLONGED EXPOSURE OF THIS 
PRODUCT TO UNCOATED STEEL SURFACES MAY RESULT IN CORROSION AND POSSIBLE FAILURE OF 
THE PART. LANDING GEAR IS MOST SUSCEPTIBLE. The maintenance of an organic coating (paint), which 
meets aerospace specification MIL-C-38413, may prevent corrosion.

Page 110 of 143 
 
 
AERIAL SPRAY DRIFT MANAGEMENT 
The following drift management requirements must be followed to avo id off -target drift movement from aerial 
applications to agricultural field crops. 
1. The distance of the outermost nozzles on the boom must not exceed three-fourths the length of the wingspan or 
rotor. 
2. Nozzles must always point backward, parallel with the air stream and never be pointed downwards more than 45 o. 
Observe more stringent regulations in states where applicable. 
 
Importance of Droplet Size 
The most effective way to reduce drift potential is to apply large droplets. The enhanced drift management strategy is 
to apply the largest droplets that provide sufficient coverage and control. Applying larger droplets reduces drift potential, 
but will not prevent drift if applications are made improperly, or under unfavorable environmental conditions (see the 
“Wind”, “Temperature and Humidity”, and “Temperature Inversions” sections that follow). 
 
Controlling Droplet Size 
• Volume: Use high flow rate nozzl es to apply the highest practical spray volume. Nozzles with the higher rated flows 
produce larger droplets. 
• Pressure: Use the lower spray pressures listed for the nozzle. Higher pressure reduces droplet size and does not 
improve canopy penetration. When higher flow rates are needed, use higher flow rate nozzles instead of increasing 
pressure. 
• Number of Nozzles: Use the minimum number of nozzles that provide uniform coverage. 
• Nozzle Orientation: Orienting nozzles so that the spray is released backwards, parallel to the airstream, will produce 
larger droplets than other orientations. Significant deflection from the horizontal will reduce droplet size and increase 
drift potential. 
• Nozzle Type: Use a nozzle type that is designed for the intended application. With most nozzle types, narrower spray 
angles produce larger droplets. Consider using low-drift nozzles. Solid stream nozzles oriented straight back produce 
larger droplets than other nozzle types. 
• Boom Length: For some use patterns, reducing the e ffective boom length to less than three-fourths of the wingspan 
or rotor length may further reduce drift without reducing swath width. 
• Application Height: Do not make applications at a height greater than 10 feet above the top of the largest plants unless 
a greater height is required for aircraft safety. Making applications at the lowest height that is safe reduces the 
exposure of the droplets to evaporation and wind. 
 
Swath Adjustment 
When applications are made with a crosswind, the swath will be displaced downwind. Therefore, on the up and 
downwind edges of the field, the applicator must compensate for this displacement by adjusting the path of the aircraft 
upwind. Increase swath adjustment distance increase, with increasing drift potential (higher wind, smaller droplets, 
etc.). 
 
Wind 
Drift potential is lowest between wind speeds of 2 to 10 mph. However, many factors, including droplet size and 
equipment type determine drift potential at any given speed. Avoid application below 2 mph due to variabl e wind 
direction and high inversion potential. Note: Local terrain can influence wind patterns. Every applicator must be familiar 
with local wind patterns and how they affect drift. 
 
Temperature and Humidity 
When making applications in low relative humidit y, set up equipment to produce larger droplets to compensate for 
evaporation. Droplet evaporation is most severe when conditions are both hot and dry. 
 
Temperature Inversions 
Do not make applications during a temperature inversion because drift potential is high. Temperature inversions restrict 
vertical air mixing, which causes small, suspended droplets to remain in a concentrated cloud. This cloud can move in 
unpredictable directions due to the light variable winds common during inversions. Temperature inv ersions are 
characterized by increasing temperatures with altitude and are common on nights with limited cloud cover and light to 
no wind. They begin to form as the sun sets and often continue into the morning. Their presence can be indicated by 
ground fog; however, if fog is not present, inversions can also be identified by the movement of smoke from a ground 
source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind 
conditions) indicates an inversi on, while smoke that moves upward and rapidly dissipates indicates good vertical air 
mixing. 
 
Sensitive Areas 
Apply this product when the potential for drift to adjacent sensitive areas (e.g. residential areas, bodies of water, known 
habitat for threatened or endangered species, non-target crops) is minimal (e.g. when wind is blowing away from the 
sensitive areas). Avoid direct application to any body of water.

Page 111 of 143 
 
 
AERIAL APPLICATION IN CALIFORNIA INCLUDING FRESNO COUNTY 
[Optional voluntary label restriction] 
(Aerial application of this product may be made using helicopters only.) 
 
Do not apply this product using aerial application equipment in residential areas. 
 
AVOID DRIFT. DO NOT APPLY WHEN WINDS ARE GUSTY OR UNDER ANY OTHER CONDITION THAT 
FAVORS DRIFT. DRIFT CAN CAUSE DAMAGE TO ANY VEGETATION CONTACTED TO WHICH APPLICATION 
WAS NOT INTENDED. TO PREVENT INJURY TO ADJACENT DESIRABLE VEGETATION, USE PROPER AERIAL 
APPLICATION EQUIPMENT FITTED WITH APPROPRIATE NOZZLES AND MAINTAIN ADEQUATE BUFFERS. 
 
Follow the directions below when making aerial application near non- target crops or desirable annual or perennial 
vegetation after bud break and before total leaf drop. 
 
1. Do not apply within 100 feet of all desirable vegetation or non-target crop(s). 
2. If wind up to 5 m iles per hour is blowing toward desirable vegetation or non- target crop(s), do not apply within 500 
feet of the desirable vegetation or crop(s). 
3. Winds blowing from 5 to 10 m iles per hour toward desirable vegetation or non-target crop(s) may require buffer 
zones greater than 500 feet to protect desirable vegetation or crops. 
4. Do not apply this product when winds are blowing in excess of 10 miles per hour or when inversion conditions exist. 
 
When tank -mixing this product with 2 ,4-D, only 2 ,4-D Amine formulations may be used for aerial application in 
California. Tank-mixtures with 2, 4-D Amine formulations may be applied by air in California for fallow fie lds and in 
reduced tillage systems and for Alfalfa and pasture renovation applications only. 
 
This product when tank-mixed with Dicamba may not be applied by air in California. 
 
ADDITIONAL LIMITATIONS FOR AERIAL APPLICATION IN FRESNO COUNTY , CALIFORNIA ONLY (Only from 
February 15 through March 31) 
 
Applicable Area 
• North: Fresno County line 
• South: Fresno County line 
• East: State Highway 99 
• West: Fresno County line 
 
Use Information 
Observe the following directions to minimize off-site movement during aerial application of this product. Minimization of 
off-site movement is the responsibility of the grower, Pest Control Advisor, and aerial applicator. 
 
Written Directions 
Written directions MUST be submitted by or on behalf of the applicator to the Fresno County Agricultural Commissioner 
24 hours prior to the application. These written directions MUST state the proximity of the surrounding crops, and that 
conditions of each manufacturer's applicable product label(s) and this label have been satisfied. 
 
Aerial Applicator Training and Equipment 
Aerial application of this product is limited to pilots who have successfully completed a Fresno County Agricultural 
Commissioner and California Department of Pesticide Regulation approved training program for aerial application of 
herbicides. All aircraft must be inspected, critiqued in flight, and certified at a Fresno County Agricultural Commissioner 
approved fly-in. Test and calibrate spray equipment at intervals sufficient to ensure that proper rates of herbicides and 
adjuvants are being applied during commercial use. Applicator must document such calibrat ions and testing. 
Demonstration of performance at Fresno County Agricultural Commissioner approved fly -ins constitutes such 
documentation, or other written records showing calculations and measurements of flight and spray parameters 
acceptable to the Fresno County Agricultural Commissioner. 
 
Applications at Night 
Do not apply this product by air earlier than 30 minutes prior to sunrise and/or later than 30 minutes after sunset without 
prior permission from the Fresno County Agricultural Commissioner. 
For additional information on the proper aerial application of this product in Fresno County, call (901) 774-4370. 
 
GROUND APPLICATION EQUIPMENT 
Apply this product at the appropriate rate in 3 to 40 gallons of water per acre when making a broadcast application 
using ground application equipment unless otherwise directed on this label or on separate supplemental labeling or 
Fact Sheets published for this product . As the weed density increases , increase the spray volume towards the upper

Page 112 of 143 
 
end of this range to ensure complete coverage. Use nozzles that will avoid generating a fine mist. For enhanced results 
with ground application equipment use flat fan nozzles. Check spray pattern for uniform distribution of spray droplets. 
 
HANDHELD SPRAYERS 
When using a handheld sprayer, apply spray solutions of this product uniformly and completely to the foliage of target 
weeds using a coarse droplet spectrum and a spray -to-wet technique; do not spray to the point of runoff. For the 
appropriate concentration of this product in the spray solution and timing of application to control certain weeds, woody 
brush, trees and vines, refer to the “WEEDS CONTROLLED” section of this label. 
 
To control annual weeds, make application when weeds are small and prior to seedhead or bud formation. To control 
perennial weeds, woody brush, trees and vines, make application after flowering and before fall color and leaf drop. 
 
When making a low volume directed spray to control annual and perennial weeds, woody brush, trees and vines using 
a handheld sprayer, ensure that at least 50% to 75% of the foliage or the top one-half of each unwanted plant is 
sprayed. If a straight stream nozzle is used, start the application at the top of the targeted plant and spray from top to 
bottom in a lateral zig-zag motion. To ensure uniform and complete coverage, spray both sides of large or tall woody 
brush, trees and vines or when foliage is thick and dense or where there are multiple sprouts. For enhanced results on 
woody brush, trees and vines , apply to actively growing vegetation after full leaf expansion and flowering prior to Fall 
color and leaf drop. 
 
The following table summarizes various methods of foliar application using a backpack sprayer with a spray -to-wet or 
low volume directed spray technique and high volume sprayer application using handheld application equipment for 
control or partial control of herbaceous weeds, woody brush, trees and vines listed in “WEEDS CONTROLLED” section 
of this label. 
 
Method of Application Concentration of Spray 
Solution (% by Volume) 
Spray Volume 
Handgun or Backpack Sprayer 1.3 Spray-to-wet 
Low Volume Directed Spray (Backpack, Handgun, 
Mistblower) 
3.1 to 6.2 15 to 25 gal./A 
Modified High Volume Spray 1.3 to 2.8 40 to 60 gal./A 
 
Low volume directed spray application with a backpack sprayer works best when applying to weeds and brush less 
than 10 feet tall. For taller weeds and brush, a high volume handgun can be modified by reducing the nozzle size and 
spray pressure to produce a modified high volume directed spray application. 
 
SELECTIVE APPLICATION EQUIPMENT 
Selective application equipment allows this product to be applied to weeds growing near the crop or other desirable 
vegetation without killing the desirable vegetation. Selective application equipment must be capable of preventing all 
contact of the herbicide solution with the crop or other desirable vegetation and operated without spray mist escape, 
leakage or dripping of the herbicide solution. 
 
AVOID CONTACT OF THIS HERBICIDE WITH DESIRABLE VEGETATION. Contact of this product with desirable 
vegetation could result in unwanted plant damage or destruction. 
 
This product may be diluted with water and applied using a recirculating sprayer, shielded sprayer, hooded sprayer, 
wiper applicator or sponge bar to weeds growing on any terrestrial non-food or non-feed crop sites listed on this label 
where feasible. Thi s product may also be used with sprayers equipped with optical weed sensor technology. Other 
selective equipment that may be used to deliver or apply this product are a single and hollow stem injectors, tree 
injectors, wiper applicators for cut stem and cut stump applications and spray or squirt bottles for cut stem, cut stump 
and frill applications to control large stemmed weeds, brush, trees and vines listed under “WEEDS CONTROLLED” 
section of this label. 
 
Shielded and Hooded Sprayers 
A shielded sprayer directs the herbicide solution to the target weeds while protecting the crop or other desirable 
vegetation from coming into contact with the herbicide spray with an impervious material or shield. Use nozzles that 
provide uniform coverage within the application area. Keep shields properly adjusted to protect desirable vegetation. 
A hooded sprayer is a type of shielded sprayer where the spray pattern is fully enclosed, including the top, sides, front 
and back, thereby shielding the crop or other desirable vegetation from the spray solution. 
 
This product may be diluted in water and applied using a shielded or hooded sprayer to weeds listed on this label 
growing on any non-crop site described on this label and in between rows of plants (row middles) in any cropping 
system listed on this label.

Page 113 of 143 
 
Properly adjust the hood to protect desirable vegetation. Ensure that the hood is capable of completely enclosing the 
spray pattern. If necessary when applying around crops grown on raised beds, extend the front and rear flaps of the 
hooded sprayer downward to reach the ground in deep furrows. 
 
A hooded sprayer must be configured and operated in a manner that minimizes bouncing and avoids raising the hood 
up off the ground surface at any time. If the hood is raised, spray particles can escape and come into contact with the 
crop, causing damage to or destruction of the crop or other desirable vegetation. Avoid operating this equipment on 
rough or sloping terrain where the spray hood is likely to rise up off the ground surface. 
 
Use hoods designed to minimize excessive dripping or run-off down the insides of the hoods. A single, low pressure/low 
drift flat-fan nozzle with an 80 to 95 degree spray angle positioned at the top center of the hood is recommended. Spray 
volume should be 20 to 30 gallons per acre. 
 
The following procedures will reduce the potential for crop injury when using a hooded sprayer: 
• Operate the spray hoods on the ground or skimming across the ground. 
• Leave at least an 8 inch untreated strip over the drill row. For example, if the crop row width is 38 inches, the maximum 
width of the spray hood should be 30 inches. 
• Operate at a ground speed of no greater than 5 miles per hour to minimize bouncing of the hooded sprayer. 
• Apply when wind speed is 10 miles per hour or less. 
• Use low-drift nozzles that provide uniform coverage within the treated area. 
 
Injury to c rop and other desirable vegetation can occur when application is made to foliage of weeds that come into 
direct contact with leaves of the crop or desirable vegetation. Do not apply this product when the leaves of desirable 
vegetation are growing in direct contact with weeds to be treated. Droplets, mist, foam or splatter of the herbicide 
solution settling onto desirable vegetation can result in discoloration, stunting or destruction. 
 
Wiper Applicators 
A wiper applicator is a device that physically wipes this product or solutions of this product directly onto the target weed 
or cut stump. Any handheld device that is capable of physically wiping this product or solutions of this product directly 
onto the target weed or cut stump, including a paint brush, may be used. 
 
A mechanical wiper applicator, including a rope wick or sponge bar that can be driven through a field over the top of a 
crop or other desirable vegetation to control weeds that are taller than the desirable vegetation, must be designed, 
maintained and operated to prevent the herbicide solution from contacting desirable vegetation. 
 
Wiper applicators may be used over the top of food or feed crops ONLY if specifically permitted for use over that crop 
by this label or by separately published supplemental labeling for this product. 
 
When using a mechanical wiper applicator, adjust the height of the applicator to ensure adequate contact with weeds 
and so that the wiper contact point is a minimum of 2 inches above the desirable vegetation. Enhanced results can be 
obtained when more of the weed is exposed to the herbicide solution and weeds are a minimum of 6 inches above the 
desirable vegetation. Weeds that do not come in contact with the herbicide solution will not be affected. Poor contact 
can occur when weeds are growing in dense clumps, when operating in an area of severe weed infestation, or when 
weed height varies dramatically. In these situations, more than one application of this product might be necessary. 
 
Operate wiper applicators at a ground speed of no greater than 5 miles per hour. Performance in areas of heavy weed 
infestation can be improved by reducing speed, which will provide more time for re-saturation of the wiper with the 
herbicide solution and more contact time of the wiper with the weed. Enhanced results with a wiper applicator can be 
obtained when two applications are made travelling in opposite directions in the field. 
 
Keep wiper surfaces clean. 
 
Droplets, mist, foam or splatter of the herbicide solution settling onto desirable vegetation can result in discoloration, 
stunting or destruction. Avoid leakage or dripping onto desirable vegetation. Be aware that on sloping ground the 
herbicide solution can migrate to one side, causing dripping on the lower end and drying of the wiper on the upper end 
of the applicator. 
 
Do not apply this product using a wiper applicator when weeds are wet. 
 
[Optional] (Do not add surfactant to the herbicide solution when using a wiper applicator.) 
For Rope or Sponge Wick Applicators — Apply solutions ranging from 20 to 70% of this product by volume in 
water. 
 
For Panel Applicators— Apply solutions ranging from 20 to 100% (undiluted) of this product by volume in water. 
 
Mix only the amount of this product that will be used during a 1 day period as reduced product performance can result 
from the use of solutions held in storage.

Page 114 of 143 
 
 
Clean wiper parts promptly after using this product by thoroughly flushing with water. 
 
Recirculating Sprayer – A recirculating sprayer directs the spray solution onto weeds growing above desirable 
vegetation while spray solution that is not intercepted by weeds is collected and returned to the spray tank for re-
application. A recirculating sprayer may be used to apply spray solutions of this product to weeds listed on this label in 
any terrestrial non-crop site described on this label. 
 
Single and Hollow Stem Injectors – Control of certain weeds listed in “WEEDS CONTROLLED” section of this 
label can be obtained by injecting this concentrated product or solutions of this product directly in or onto the target 
weed. Ensure that the handheld injector being used for this application is capable of accurately delivering the volume 
specified on the label. When making stem injections, the combined total use of this product must not exceed 6.75 quarts 
per acre per year. At 5 milliliters (ml) of concentrated (undiluted) product per stem, 6.75 quarts will treat approximately 
1,300 stems per acre per year. The number of stems that can be treated per acre will vary depending on the injection 
volume and the concentration of this product in the application solution. 
 
INJECTION SYSTEM 
This product may be used in aerial or ground injection spray systems. It may be used as a liquid concentrate or diluted 
prior to injecting into the spray stream. Do not mix this product with the concentrate of other products when using 
injection systems, unless otherwise directed. 
 
CONTROLLED DROPLET APPLICATOR (CDA) 
The amount of this product applied per acre using CDA must not be less than the amount specified in this label when 
applied by conventional broadcast application equipment. 
 
CDA produces a spray pattern that is not easily visible. Extreme care must be exercised to avoid spray or drift contacting 
the foliage or any other green tissue of desirable vegetation, as damage or destruction may result. 
 
TERRESTRIAL USE SITES 
This product may be used to control weeds, woody brush, trees and vines on maintained landscapes, on improved and 
unimproved land, on lawns and turf and around ornamentals on industrial, commercial and residential sites*, including 
airports, apartment complexes*, chaparrals, ditch banks, driveways, dry ditches, dry canals, farmsteads, fencerows, 
forestry sites, golf courses, greenhouses, lumber yards, manufacturing sites, municipal sites, nurseries, natural areas, 
office complexes, ornamental beds, parks, parking areas, pastures, petroleum tank farms, pumping installations, 
railroads, rangeland, recreational areas, residential areas*, roadsides, schools, shadehouses, sod and Turfgrass seed 
farms, sports complexes, storage areas, substations, utility rights -of-way, utility sites, warehouse areas, wildlife food 
plots and wildlife management areas. 
*Intended To Be Applied By Certified/Professional Applicators 
 
This product may be used for non-selective control of unwanted vegetation on any site listed in this section for trim-
and-edge application around objects, including around building foundations, equipment storage areas and trees, along 
and in fences, and to eliminate unwanted weeds growing in and around established shrub beds and ornamental 
plantings. 
 
This product may also be used for complete elimination of vegetation from a terrestrial site prior to planting ornamentals, 
flowers or Turfgrass (sod or seed), and prior to land development, including prior to beginning construction projects or 
the laying of asphalt or other road material. Application of this product may be repeated, as needed, to maintain bare 
ground, up to a total application of 216 fluid ounces (6.75 qt.) per acre per year. 
 
This product may be used for establishment and maintenance of fuel breaks, for establishing fire perimeters and black 
lines, along fire roads and to facilitate prescribed burning practices on any site described in this section. 
 
[Optional label text: This product may also be used for weed control or gr owth regulation on] [Optional list of any 
terrestrial uses that are included in this section, including: Christmas tree farms, Farmsteads, Production nurseries, 
Sod farms and Turfgrass seed farms.] 
Unless otherwise specified, application of this product may be made according to the directions for use in the sections 
that follow to any of these sites using any application equipment described on this label to control any weeds listed 
under “WEEDS CONTROLLED” section of this label. [Alternative Text: Unless otherwise directed, application of this 
product may be made according to the directions for use in the sections that follow to any of these sites using any 
method of application described on this label to control any weeds, woody brush, trees and vines listed in the “WEEDS 
CONTROLLED” section at the end of this label.] [Alternative Text: Unless otherwise directed, application of this product 
may be made according to the directions for use in the sections that follow on any of these sites using any method of 
application described on this label to control any weeds, woody brush, trees and vines listed in the "ANNUAL WEEDS",

Page 115 of 143 
 
"PERENNIAL WEEDS", and "WOODY BRUSH, TREES AND VINES" found under “WEEDS CONTROLLED” section 
of this label.] 
 
ADDITIONAL USE SITES 
In addition to the above listed uses, this product may be used in the management of the following sites: Commercial, 
Residential* and Recreational Area Management; Forestry, Hardwood, and Christmas Tree Management; Native and 
Wildlife Habitat Management; Ornamental and Production Nursery Management; Pasture Management; Railroad 
Management; Rangeland Management; Roadside Management; Utility Management. 
*Intended To Be Applied By Certified/Professional Applicators 
 
Unless otherwise directed, any application of this product described under the “TURF” section or any other section of 
this label may be made on the following use sites described, where applicable, using any method of application on this 
label that is appropriate. 
 
Commercial, Residential*, and Recreational Area Management 
All applications of this product described in this section may be used in commercial, residential*, and recreational areas, 
including parks, schools and athletic fields, using any appropriate method of application described on this label, 
including spot treatment of unwanted vegetation, trim -and-edge application around trees, fences, walking paths, 
buildings, sidewalks, nature trails to eliminate unwanted weeds growing in established shrub and ornamental beds, for 
Turf management and renovation, and to eliminate vegetation from a site prior to development, including prior to 
planting an area to ornamentals, flowers or Turfgrass (sod or seed) or beginning construction projects. 
*Intended To Be Applied By Certified/Professional Applicators 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Forestry, Hardwood, and Christmas Tree Management 
This product may be used to control or partially control woody brush, trees, and herbaceous weeds on any tree site, 
including forestry settings, Christmas tree plantations, and silvicultural and production nursery sites using any 
appropriate method of application listed on this label. 
 
See the “WEEDS CONTROLLED”” section of this label for application rates and specific use directions. 
 
Weed Management, Site Preparation 
This product may be used to control or partially control undesirable woody brush, trees, vines, and herbaceous weeds 
listed in this section for preparing sites prior to planting any tree species, including Christmas trees, Eucalyptus trees 
and hybrid tree cultivars, and for controlling weeds around established trees, [Optional text: for the release of conifer 
and hardwood trees,] establishing wildlife openings and maintaining roads on any tree site. 
 
TANK-MIXTURES: This product may be applied in a tank-mix with the other herbicides (examples are listed below) to 
increase the spectrum of vegetation controlled. Any application rate of this product listed in this section may be used in 
a tank-mix with the following products for tree site management, including site preparation, provided that the product is 
labeled for the use on the site of application and prior to planting the desired species. 
 
Imazapyr 
Metsulfuron-methyl 
Sulfometuron-methyl 
Triclopyr 
 
For control of herbaceous weeds, apply these tank-mix products at the lower end of the application rate range specified 
on the product label. For control or partial control of dense stands or hard- to-control woody brush, trees and vines , 
apply these products at a rate or spray solution concentration towards the higher end of the given range. 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
Conifer Release, Mid-Rotation Conifer Release, Hardwood Release, Timber Stand Improvement 
This product may be applied as a directed spray using a handheld sprayer or using any selective application equipment 
described on this label to control woody and herbaceous weeds and other undesirable understory vegetation below the

Page 116 of 143 
 
tree crop canopy in conifer plantations, hardwood sites, Christmas tree plantations, and silvicultural and ornamental 
nurseries to facilitate the release and growth of conifer and hardwood trees. 
 
This product may also be applied using ground broadcast equipment or as a directed spray application for mid-rotation 
release under the canopy of pines, other conifers and hardwoods. 
 
USE PRECAUTIONS: Avoid contact of spray drift, mist or drips with foliage, green bark or non-woody surface roots of 
desirable plant species. Use application techniques that prevent or minimize contact of this product with foliage of 
desired trees or other plants through direct contact or off-target spray movement. 
 
USE RESTRICTIONS: Do not apply this product as an over -the-top broadcast application for conifer or hardwood 
release, unless otherwise directed on this label or on separate supplemental labeling for this product.] 
 
[This section is optional in the final printed label] Conifer Release – Broadcast Application 
This product may be broadly applied over the top of conifer tree species listed in this section after formation of final 
conifer resting buds in the Fall or prior to initial bud swelling in the spring for control, p artial control or suppression of 
herbaceous weeds and hardwoods listed in the “WEEDS CONTROLLED” section of this label to facilitate the release 
of these tree species in a forestry, plantation or nursery for a minimum of one growing season. 
 
USE PRECAUTIONS: Conifer injury can occur when this product is applied at rates higher than prescribed on this 
label, where spray applications overlap, if application is made when conifers are actively growing or when they are 
growing under stress from drought, flood, improper planting or insect, animal or disease damage. 
 
Conifer Release Outside the Southeastern United States : For release of the following conifer species growing for 
a minimum of one growing season in most areas outside the southeastern United States, apply 20 to 40 fluid ounces 
acre as a broadcast application over the top of the conifer trees. 
 
Douglas fir 
Fir species 
Hemlock 
Pines* 
California redwood 
Spruce 
* Includes all species except Loblolly, Longleaf, Shortleaf or Slash pine. 
 
Apply 20 to 34 fluid ounces of this product for release of Douglas fir, Pine, and Spruce that have been established for 
only one growing season (except in California). 
 
For release of Spruce (Picea spp.) in Maine, Michigan, Minnesota, New Hampshire and Wisconsin, up to 60.8 fluid 
ounces of this product may be applied after formation of final resting buds in the Fall for control of woody brush and 
tree species. 
 
USE PRECAUTIONS: Ensure that the conifers are well hardened off before application of this product. [Optional text 
if adding surfactant to spray solutions of this product is allowed: The addition of nonionic surfactants to spray solutions 
of this product when making over-the-top conifer release applications could cause conifer injury.] 
 
Conifer Release in the Southeastern United States: For release of the following conifer species established for more 
than one growing season in the southeastern United States, apply 30 to 51 fluid ounces of this product per acre in the 
Fall as a broadcast application over the top of the trees. For release of these species after only one growing season, 
apply only 20 fluid ounces of this product per acre. 
 
Eastern white pine 
Loblolly pine 
Longleaf pine 
Short leaf pine 
Slash pine 
Virginia pine 
 
TANK-MIXTURES: This product may be applied for conifer release in a tank -mix with other herbicides (examples are 
listed below) to provide a broader spectrum of post-emergence weed control and for residual control of weeds listed on 
the label of those products. Apply only these tank-mixtures over-the-top of conifer species that are approved for this 
use for all products in the mix. 
 
Imazapyr 
Metsulfuron-methyl 
Sulfometuron-methyl 
 
For herbaceous release of Loblolly pine, Longleaf pine, and Virginia pine in the Spring and early Summer, apply 10 to 
15 fluid ounces of this product per acre in a tank-mixt with an appropriate rate of Sulfometuron-methyl or Sulfometuron-
methyl plus Metsulfuron-methyl. 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture.]

Page 117 of 143 
 
 
Late Summer and Fall after Resting Bud Formation 
For release of Jack pine, White pine, and White spruce, apply 20 to 40 fluid ounces of this product per acre in a tank -
mix with an appropriate rate of Sulfometuron-methyl or Sulfometuron-methyl plus Metsulfuron-methyl that will not harm 
these conifer species. 
 
For release of Douglas fir, apply 20 to 30 fluid ounces of this product per acre in a tank-mix with an appropriate rate of 
Imazapyr. 
 
For release of Balsam fir and Red spruce, apply 40 fluid ounces of this product per acre in a tank-mix with an appropriate 
rate of Imazapyr. 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Native and Wildlife Habitat Management 
This product may be used to control exotic and other undesirable vegetation in wildlife habitat and natural areas, 
including riparian and estuarine areas, rangeland, and wildlife refuges. Application may be made to allow recovery of 
native plant species or prior to planting desirable native species, and for similar broad spectrum vegetation control. 
 
Spot treatment, cut stump, cut stem, stem injection, wiper applicator and all other methods of application listed on this 
label may be used to selectively remove unwanted plants for habitat management and enhancement. 
 
This product may also be used to eliminate annual and perennial weeds prior to planting wildlife food plots. Any wildlife 
food species may be planted after applying this product or native species may be allowed to repopulate the area. If 
tillage is needed to prepare a seedbed, wait a minimum of 7 days after application before tillage to allow translocation 
of this herbicide into underground plant parts. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Ornamental and Production Nursery Management 
All uses of this product described in this section may be used in a plant nursery setting using any appropriate method 
of application described on this label. 
 
This product may be used to clear an area of unwanted vegetation prior to planting any ornamental pl ant, tree, shrub 
or other plants. 
 
This product may also be used to control weeds growing around established woody ornamental species , including 
Arborvitae, Azalea, Boxwood, Crabapple, Eucalyptus, Euonymus, Fir, Douglas fir, Jojoba, Hollies, Lilac, Magnolia, 
Maple, Oak, Poplar, Privet, Pine, Spruce and Yew. This product may also be used to trim and edge around potted 
plants and other objects in a plant nursery. 
 
USE PRECAUTIONS: Protect desirable plants from the spray solution using shields or coverings made of waterproof 
material. Take care to avoid contact of spray, drift or mist with foliage, green stems or immature bark of established 
ornamental species. 
 
Greenhouse/Shadehouse 
This product may be used to control weeds growing in and around greenhouses and shadehouses.

Page 118 of 143 
 
USE RESTRICTIONS: Desirable vegetation must not be present during application in a greenhouse. Turn air circulation 
fans off before applying this product inside a greenhouse or shadehouse and leave them off until the application solution 
has dried. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Pasture Management 
The use of this product in pastures includes use on Bahiagrass, Bermudagrass, Bluegrass, Brome, Fescue, Guinea 
grass, Kikuyu grass, Orchardgrass, Pangola grass, Ryegrass, Timothy and Wheatgrass. 
 
 
Pre-plant, Pre-emergence, Pasture Renovation 
This product may be applied prior to planting or emergence of forage or perennial grasses. Refer to the “WEEDS 
CONTROLLED” section of this label for application rates of this product for control of specific weeds. 
 
USE RESTRICTIONS: If the total application rate of this product is 60.8 fluid ounces (1.9 qt.) per acre or less, no waiting 
period between application and feeding or livestock grazing is required. If the rate is greater than 60.8 fluid ounces (1.9 
qt.) per acre, remove domestic livestock before application and wait a minimum of 8 weeks after application before 
grazing or harvesting. 
 
Spot Treatment, Wiper Applicator 
This product may be applied in pastures as a spot treatment or over -the-top of desirable grasses using a wiper 
applicator to control taller growing weeds. For enhanced weed control, remove domestic livestock before application to 
allow for sufficient plant growth and wait a minimum of 7 days after application before grazing livestock or harvesting 
for feed. See additional instruct ions on the use of wiper applicators in the "APPLICATION EQUIPMENT AND 
TECHNIQUES" section of this label. 
 
USE RESTRICTIONS: For spot treatment or use with a wiper applicator at rates of 60.8 fluid ounces (1.9 qt.) per acre 
or less, this product may be applied over the entire pasture or any portion of it. At rates greater than 60.8 fluid ounces 
(1.9 qt.) per acre, this product may be applied over no more than 10% of the total pasture at any one time. Application 
may be repeated in the same area at 30 day intervals. 
 
Weed Suppression in Dormant Pastures 
This product may be applied in dormant pastures to suppress competitive growth and seed production of annual weeds 
and other undesirable vegetation. Apply 8 to 10 fluid ounces of this product per acre using broadcast application 
equipment on pastures in late -fall after desirable perennial grasses have reac hed dormancy or in late-winter before 
desirable perennial grasses break dormancy and initiate green growth. 
 
USE PRECAUTIONS: Higher application rates may be used for hard-to-control weeds; however, higher rates can cause 
stand reduction. Some stunting of perennial grasses can occur if broadcast application is made when they are not 
dormant. 
 
USE RESTRICTIONS: No waiting period is required between application and grazing or harvesting for feed. Do not 
apply more than 60.8 fluid ounces (1.9 qt.) of this product per acre per year onto pasture grasses except for renovation. 
If reseeding is needed due to severe stand reduction, no waiting period is required after application of this product 
before seeding the pasture grasses listed at the beginning of this section; for all other pasture grasses, wait a minimum 
of 30 days after application before seeding. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac)

Page 119 of 143 
 
 
Railroad Management 
All uses of this product described in the “TURF” section or any other sections on this label may be used on railroad 
sites using any method of application described. 
 
Application of this product along railroad rights-of-way may be made in up to 80 gallons of spray solution per acre. 
 
Bare Ground, Ballast and Shoulders, Crossings, Spot Treatment 
This product may be used to maintain bare ground on railroad ballast and shoulders and reduce the need for mowing 
and mechanical brush removal along railroad rights-of-way. 
 
Application of this product may be repeated as weeds continue to emerge to maintain bare ground up to a maximum 
total application rate of 216 fluid ounces (6.75 qt.) of this product per acre per year. 
 
TANK-MIXTURES: This product may be applied in a tank-mixture with other herbicides (examples are listed below) for 
enhanced control of woody brush and trees for bare ground, ballast and shoulder, crossing s, and spot treatment 
applications, and other brush, tree, and vine control on railroad sites, provided that the product used is labeled for the 
application being made. 
 
Bromacil 
Chlorsulfuron 
Clopyralid 
2,4-D 
Dicamba 
Diquat 
Diuron 
Hexazinone 
Imazapyr 
Metsulfuron-methyl 
Pelargonic acid 
Sulfometuron-methyl 
Sulfosulfuron 
Tebuthiuron 
Triclopyr 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
Brush, Tree, and Vine Control 
This product may be used to control woody brush, trees and vines along railroad rights-of-way. 
 
Apply 80 to 216 fluid ounces (2.5 to 6.75 qt.) of this product in up to 80 gallons of spray solution per acre as a broadcast 
application using either a boom or boomless sprayer. Apply a 0. 6 to 1.3% solution of this product when using high 
volume application equipment with a spray-to-wet technique or a 3.1 to 6.2% solution when using low volume directed 
sprays for spot treatment. 
 
TANK MIXTURES: This prod uct may be applied in a tank -mix with other products (examples are listed below) for 
enhanced control of woody brush, trees and vines along railroad rights-of-way, provided that the product is labeled for 
use on these sites. 
 
Chlorsulfuron 
Clopyralid 
2,4-D 
Dicamba 
Fosamine 
Hexazinone 
Imazapyr 
Metsulfuron-methyl 
Picloram 
Triclopyr 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
Weed Control in Dormant and Actively Growing Bermudagrass 
This product may be used to control or partially control many annual and perennial weeds in dormant and actively 
growing Bermudagrass along Railroad rights-of-way. See the “WEEDS CONTROLLED” section of this label for weed 
control directions for use. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac)

Page 120 of 143 
 
Rangeland Management 
This product will control or suppress many annual weeds growing in perennial cool and warm season grass rangeland. 
Slight discoloration of the desirable grasses could occur, but will regreen and resume growing under moist soil 
conditions as effects of this product wear off. 
Preventing seed production is critical to the control of invasive annual grassy weeds on rangeland. Yearly application 
of this product to eliminate invasive annual weeds before they produce seed will help eliminate viable weed seeds from 
the soil. Delay grazing of the area after application of this product to allow desirable perennials to grow, flower and re-
seed the area. 
Bromus Control: A broadcast application of 4 to 10 fluid ounces of this product per acre will control or suppress 
Cheatgrass (Bromus secalinus), Cereal rye, Downy brome (Bromus tectorum), Japanese brome (Bromus japonicus), 
Jointed goatgrass and Soft chess (Bromus mollis) on rangeland. For enhanced results, apply this product when most 
Brome plants are in early -flower and before the plants, including seedheads turn color. Allow for secondary weed 
flushes to occur after spring rains to further deplete the seed reserve in the soil and encourage perennial grass 
conversion on weedy sites. Apply this product in the Fall in areas where spring moisture is normally limited and Fall 
germination allows for good weed growth and weed seed depletion. 
Medusahead Control: To control or suppress Medusahead, apply 10 fluid ounces of this product per acre at the 3 leaf 
stage. Delaying application beyond this stage will result in reduced or unacceptable control. Controlled burning prior to 
application of this product will eliminate the thatch layer produced by slowly decaying culms. Allow new weed growth 
to occur before applying this product after a burn. Repeat this application annually to eliminate Medusahead seeds in 
the soil and allow desirable perennial grasses to repopulate the area. 
USE RESTRICTIONS: Do not apply more than 60.8 fluid ounces (1.9 qt.) of this product per acre per year on rangeland. 
Do not use ammonium sulfate when applying this product on rangeland grasses. No waiting period between application 
of this product and feeding or livestock grazing is required. 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 10 fl. Oz/Ac (0.38 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 10 fl Oz/Ac (0.38 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 60 fl. Oz/Ac (2.25 Lbs AE/Ac) 
Roadside Management 
All uses of this product described on this label may be used for weed management along roadways, including weed 
control in dormant and active Bermudagrass and Bahiagrass, weed control along shoulders and under and around 
guardrails, signposts, and other objects along the road using any method of application described on this label. 
 
TANK-MIXTURES: This product may be tank -mixed with other herbicide (examples are listed below) for shoulder, 
guardrail, spot treatment, and maintaining bare ground applications provided that the product used is labeled for use 
on these sites. 
 
Bromacil 
Chlorsulfuron 
Clopyralid 
2,4-D 
Dicamba 
Diuron 
Fosamine 
Hexazinone 
Imazapic 
Imazapyr 
Metsulfuron-methyl 
Oryzalin 
Oxadiazon 
Pendimethalin 
Picloram 
Prodiamine 
Sulfometuron 
Sulfosulfuron 
Triclopyr 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture.

Page 121 of 143 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Turf 
Weed Control, Renovation, and Chemical Mowing in Turf 
The use of this product described below may be applied to Turfgrass growing on any terrestrial site listed on this label. 
 
Weed Control in Dormant Bermudagrass and Bahiagrass 
This product may be used to control or suppress many Winter annual weeds and Tall fescue for effective release of 
dormant Bermudagrass and Bahiagrass prior to spring green-up in areas where these Turfgrasses are desirable ground 
covers and some temporary injury or discoloration can be tolerated. 
 
Apply 4 to 40 fluid ounces of this product in 10 to 40 gallons of water per acre when Bermudagrass and Bahiagrass are 
dormant and prior to Spring green-up. 
 
Application of more than 10 fluid ounces of this product per acre on highly maintained Bermudagrass and Bahiagrass 
turf including golf courses and lawns could result in injury or delayed green-up in the Spring. 
 
For residual weed control in dormant Bermudagrass and Bahiagrass, this product may be tank -mixed with 
Sulfometuron-methyl, Sulfometuron -methyl plus Metsulfuron -methyl or Sulfosulfuron herbicides. Apply 4 to 40 fluid 
ounces of this product per acre in a tank -mix with an appropriate rate of Sulfometuron-methyl, Sulfometur on-methyl 
plus Metsulfuron-methyl or Sulfosulfuron in 10 to 40 gallons of water per acre. To avoid delays in green-up and minimize 
injury, apply no more than the required amount of Sulfometuron- methyl or Sulfometuron-methyl plus Metsulfuron-
methyl herbicide per acre on Bermudagrass and on Bahiagrass, and avoid application when these grasses are in a 
semi-dormant condition. 
 
DO NOT apply this product in a tank -mix with Sulfometuron-methyl, Sulfometuron-methyl plus Metsulfuron-methyl or 
Sulfosulfuron herbicides on highly maintained Bermudagrass and Bahiagrass turf including golf courses and lawns. 
 
Weed Control in Actively Growing Bermudagrass 
This product may be used to control or partially control many annual and perennial weeds in actively growing 
Bermudagrass. Some Bermudagrass injury could result from the application of this product, but the Bermudagrass will 
recover under moist conditions once the effects of the product wear off. Use only on well -established Bermudagrass 
where some temporary injury or discoloration can be tolerated. 
 
Apply 10 to 30 fluid ounces of this product in 10 to 40 gallons of spray solution per acre. Use a lower application rate 
within this range when controlling annual weeds less than 4 inches tall (or runner length) and increase the rate towards 
the upper end of the range as weeds increase in size or as they approach flower or seed head formation. At these 
application rates, this product will provide partial control of the following perennial weeds in actively growing 
Bermudagrass: 
 
Bahiagrass 
Bluestem (Silver) 
Fescue (Tall) 
Johnsongrass 
Trumpetcreeper 
Vaseygrass 
 
USE PRECAUTIONS: Applying more than 10 fluid ounces of this product per acre on highly maintained Bermudagrass 
including golf courses and lawns, could cause unacceptable turf injury and discoloration. 
 
For a broader weed control spectrum in actively growing Bermudagrass, this product may be tank -mixed with an 
appropriate rate of Sulfometuron-methyl, Sulfometuron -methyl plus Metsulfuron-methyl or Sulfosulfuron. Apply these 
tank-mixtures only on well-established Bermudagrass where some temporary injury or discoloration can be tolerated. 
Make no more than one application of this product in these tank -mixtures in the same season, otherwise the 
Bermudagrass could be severely injured. 
 
Apply 4 to 20 fluid ounces of this product per acre in a tank -mix with an appropriate rate of Sulfosulfuron to control or 
partially control Johnsongrass and other weeds listed on the Sulfosulfuron label. Use a higher application rate of both 
products within the given ranges for control of annual or perennial weeds greater than 6 inches tall. 
 
Apply 10 to 20 fluid ounces of this product per acre in a tank -mix with an appropriate rate of Sulfometuron- methyl or 
Sulfometuron-methyl plus Mets ulfuron-methyl for enhanced control of weeds listed on those labels. Use a lower 
application rate of each product within the given ranges to control annual weeds listed on the labels that are less than 
4 inches tall (or runner length) and increase the rates toward the upper end of the ranges as annual weeds increase in

Page 122 of 143 
 
size and approach the flower or seed head stage. This tank -mix will provide partial control of the following perennial 
weeds in actively growing Bermudagrass: 
 
Bahiagrass 
Bluestem (Silver) 
Broomsedge 
Dallisgrass 
Dock (Curly) 
Dogfennel 
Fescue (Tall) 
Johnsongrass 
Poorjoe 
Trumpetcreeper 
Vaseygrass 
Verbain (Blue) 
 
USE PRECAUTIONS: Apply these tank-mixtures only on well-established Bermudagrass where some temporary injury 
or discoloration can be tolerated. 
 
DO NOT apply this product in tank-mixture with Sulfometuron-methyl or Sulfometuron-methyl plus Metsulfuron-methyl 
on highly maintained Bermudagrass including golf courses and lawns. 
 
Weed Control in Actively Growing Bahiagrass 
For suppression of vegetative growth and seed head inhibition of Bahiagrass for approximately 45 days, apply 4 fluid 
ounces of this product in 10 to 40 gallons of water per acre 1 to 2 weeks after full green-up or after mowing to a uniform 
height of 3 to 4 inches prior to seed head emergence. 
 
For growth suppression of Bahiagrass for up to 120 days, apply 2.5 fluid ounces of this product per acre followed by 
an application of 1.4 to 2.5 fluid ounces per acre about 45 days later. Make no more than two growth suppression 
applications per year. 
 
For broad spectrum weed control in actively growing Bahiagrass, this product may be tank-mixed with appropriate rate 
of Sulfometuron-methyl, Sulfometuron-methyl plus Metsulfuron-methyl or Sulfosulfuron. 
 
Apply 1.4 to 3.3 fluid ounces of this product per acre in a tank-mix with an appropriate rate of Sulfosulfuron per acre to 
control perennial weeds or annual weeds greater than 4 inches in height. 
 
Apply 4 fluid ounces of this product per acre in a tank-mix with appropriate rate of Sulfometuron-methyl or Sulfometuron-
methyl plus Metsulfuron-methyl 1 to 2 weeks following an initial Spring mowing for enhanced control of weeds listed on 
the Sulfometuron-methyl label in actively growing Bahiagrass. Make this application only once per year. 
 
USE PRECAUTIONS: Apply these tank-mixtures only on well-established Bahiagrass where some temporary injury or 
discoloration can be tolerated. 
 
Turf Renovation 
This product controls most existing vegetation prior to renovating Turfgrass areas or establishing Turfgrass grown for 
seed or sod. 
 
For maximum control of existing vegetation, delay planting or sodding unti l after determining if any regrowth of 
underground plant parts will occur. Where repeat applications are necessary, sufficient regrowth must be attained prior 
to re -application of this product. Summer or Fall application provides enhanced control of warm s eason grasses 
including Bermudagrass. For managed Turfgrass, apply this product after omitting at least one regular mowing to allow 
sufficient growth for good interception of the spray solution. 
 
This product has no residual soil activity and will not aff ect plants, seed or sod planted back into the area after 
application. 
 
A handheld sprayer may be used for spot treatment of unwanted vegetation growing in existing Turfgrass. Broadcast 
application or spot treatment using a handheld sprayer may be used to c ontrol sod remnants or other unwanted 
vegetation after sod is harvested. 
 
USE PRECAUTIONS: Do not disturb soil or underground plant parts before application of this product. Delay tillage 
and renovation techniques, including vertical mowing, coring or slic ing, for at least 7 days after application to allow 
translocation of this product into underground plant parts. 
 
USE RESTRICTIONS: If application rates total 60.8 fluid ounces (1.9 qt.) of this product per acre or less, no waiting 
period between application and feeding or livestock grazing is required. If the rate is greater than 60.8 fluid ounces (1.9 
qt.) per acre, remove domestic livestock before application and wait 8 weeks after application before grazing or 
harvesting. 
 
Chemical Mowing 
This product may be used to suppress growth of perennial and annual grasses listed in this section to serve as a 
substitute for mowing.

Page 123 of 143 
 
 
Annual Grasses: Apply 2.5 to 4 fluid ounces of this product in 10 to 40 gallons of spray solution per acre to suppress 
growth of some annual grasses, including Annual ryegrass, Wild barley, and Wild oats when actively growing in coarse 
Turf on roadsides or other industri al areas and before the seed heads are in the boot stage of development. This 
application could injure the desired annual grasses. 
 
Perennial Grasses: Apply 4 fluid ounces of this product per acre to suppress growth of Kentucky bluegrass or 5 fluid 
ounces to suppress Canarygrass, Fine fescue, Orchardgrass, Quackgrass, Reed or Tall fescue in 10 to 40 gallons of 
spray solution per acre after grasses have greened up to at least 75% green color in the Spring or 7 to 10 days after 
mowing when sufficient regrowth has occurred to provide a desirable height for growth regulation. Use chemical mowing 
only in areas where some temporary injury or discoloration of perennial grasses can be tolerated. 
 
USE PRECAUTIONS 
Use this product for chemical mowing only in areas where some temporary injury or discoloration of annual and 
perennial grasses can be tolerated. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 100 fl. Oz/Ac (3.75 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 40 fl. Oz/Ac (1.55 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 160 fl. Oz/Ac (6 Lbs AE/Ac) 
 
Utility Management 
This product may be used along electrical power, pipeline and telephone rights-of-way, and on all sites associated with 
these utility rights-of-way, including substations, access roads and railroads, and along similar rights-of-way that run in 
conjunction with utilities, for spot treatment of unwanted vegetation, side trimming, trim -and-edge application around 
objects, weed control prior to planting a utility site to ornamentals, flowers or Turfgrass (sod or seed), Turf management, 
to eliminate unwanted weeds growing in established shrub or ornamental beds, to prepare or establish wildlife openings 
and for eliminating vegetation prior to or beginning construction projects. 
 
Application of this product may be repeated as needed to maintain bare ground as weeds continue to emerge up to a 
maximum application rate of 216 fluid ounces (6.75 qt.) per acre per year. 
 
TANK-MIXTURES: This product may be tank-mixed with other herbicides (examples are listed below) for use on utility 
sites. For control of herbaceous weeds, use a lower application rate or spray solution concentration within the given 
ranges for these tank -mix products and increase the rate o r concentration toward the higher end of the ranges for 
control of dense stands or hard-to-control woody brush, trees and vines. 
 
Bromacil 
Chlorsulfuron 
Clopyralid 
2,4-D 
Dicamba 
Diuron 
Fosamine 
Hexazinone 
Imazapic 
Imazapyr 
Metsulfuron-methyl 
Oryzalin 
Pendimethalin 
Prodiamine 
Sulfometuron-methyl 
Sulfosulfuron 
Triclopyr 
 
Ensure that product(s) containing Triclopyr is thoroughly mixed with water according to label directions before adding 
this product to the spray mixture. Maintain continuous agitation when adding this product to avoid tank -mix 
incompatibility problems. 
 
For enhanced results with side-trimming, apply this product in a tank-mix with Triclopyr. 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
[Optional] [Crop Uses] 
[Any crop use listed in the “Sublabel 1: Food & Feed Crops” label of the Master Label for this product may be 
included on this “Sublabel 2: Forestry, Industrial, Utility Rights-of-Way, Turf & Ornamental Sites”]

Page 124 of 143 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
WEEDS CONTROLLED 
 
Always use a higher application rate or spray solution concentration of this product within a given range when weed 
growth is heavy or dense, or when weeds are growing in an undisturbed (non-cultivated) area. 
 
Poor weed control could be r ealized if application is made to weeds covered with dust. For weeds that have been 
mowed, grazed or cut, allow re-growth to occur prior to application of this product. 
 
Refer to the sections that follow for application rates and timing of application for the control of annual and perennial 
weeds, woody brush, trees and vines. 
 
Annual Weeds 
Annual weeds are easiest to control when they are small and actively growing. New leaf development indicates active 
growth. 
 
To control or partially control the annual weeds listed in this section when they are less than 6 inches in height or runner 
length and actively growing, apply 20 fluid ounces of this product per acre. If they are over 6 inches in height or runner 
length or slowly growing under stressed conditions, increase the application rate to 32 to 80 fluid ounces (1 to 2.5 qt.) 
per acre depending on weed height and severity of the poor growing conditions. 
 
For application using a handheld sprayer with a spray-to-wet technique, apply a 0.3% solution of this product to annual 
weeds less than 6 inches in height or runner length prior to seed head formation in grasses or bud formation in broadleaf 
weeds. 
 
To control annual weeds over 6 inches tall or even smaller weeds growing under stressed conditions, apply a 0.6 to 
1.3% solution. Apply the maximum concentration of this product within this range to hard-to-control weeds or to control 
weeds over 24 inches tall. 
 
To control annual weeds using a handheld controlled droplet applicator (CDA), apply a 14% solution of this product (18 
fl.oz. of this product per gallon of spray solution) at a flow rate of 2 fluid ounces of spray solution per minute and a 
walking speed of 1.5 miles per hour (1 qt. of spray solution per acre). When using a vehicle-moun ted CDA, apply the 
required amount of this product as indicated in this section in 2 to 15 gallons of water per acre. 
 
For enhanced control, do not mow, cut, till, burn or disturb vegetation in the application area for at least 3 days after 
application. 
 
This product has no residual soil activity and does not control emergence of new annual weeds from seed. Subsequent 
applications of this product will be needed to control weeds that continue to emerge.

Page 125 of 143 
 
Ammania (Purple) 
Anoda (Spurred) 
Balsam apple* 
Barley 
Barley (Little) 
Barnyardgrass 
Bassia (Fivehook) 
Beggarweed (Florida) 
Bittercress 
Bluegrass (Annual) 
Bluegrass (Bulbous) 
Brome (Downy) 
Brome (Japanese) 
Broomsedge 
Buckwheat (Wild) 
Burcucumber 
Buttercup 
Carpetweed 
Castor bean** 
Cheatgrass 
Cheeseweed (Malva parviflora) 
Chervil 
Chickweed 
Cocklebur 
Copperleaf (Hophornbeam) 
Copperleaf (Virginia) 
Coreopsis (Plains/Tickseed) 
Corn 
Crabgrass 
Crowfoot grass 
Cupgrass (Woolly) 
Cutleaf evening primrose 
Dandelion (Dwarf) 
Dandelion (False) 
Devilsclaw (Unicorn plant) 
Eclipta 
Falseflax (Smallseed) 
Fiddleneck 
Filaree 
Fleabane (Annual) 
Fleabane (Hairy) (Conyza bonariensis) 
Fleabane (Rough) 
Foxtail 
Foxtail (Carolina) 
Geranium (Carolina) 
Goatgrass (Jointed) 
Goosegrass 
Groundcherry 
Groundsel (Common) 
Henbit 
Horseweed / Marestail (Conyza 
canadensis) 
Itchgrass 
Jimsonweed 
Johnsongrass (Seedling) 
Junglerice 
Knotweed 
Kochia 
Lambsquarters 
Lettuce (Prickly) 
Mannagrass (Eastern) 
Mayweed 
Medusahead 
Morningglory (Ipomoea spp.) 
Mustard (Blue) 
Mustard (Tansy) 
Mustard (Tumble) 
Mustard (Wild) 
Nightshade (Black, Hairy) 
Oats 
Oats (Wild) 
Panicum (Browntop) 
Panicum (Fall) 
Panicum (Texas) 
Pennycress (Field) 
Pepperweed (Virginia) 
Pigweed 
Puncturevine 
Purslane (Common) 
Pusley (Florida) 
Ragweed (Common) 
Ragweed (Giant) 
Rice (Red) 
Rocket (London) 
Rocket (Yellow) 
Rye 
Ryegrass 
Sandbur (Field) 
Sesbania (Hemp) 
Shattercane 
Shepherdspurse 
Sicklepod 
Signalgrass (Broadleaf) 
Smartweed (Ladysthumb) 
Smartweed (Pennsylvania) 
Sorghum (Grain) (Milo) 
Sowthistle (Annual) 
Spanish needles*** 
Speedwell (Corn) 
Speedwell (Purslane) 
Sprangletop 
Spurge (Annual) 
Spurge (Prostrate) 
Spurge (Spotted) 
Spurry (Umbrella) 
Starthistle (Yellow) 
Stinkgrass 
Sunflower 
Swinecress 
Teaweed / Prickly sida 
Thistle (Russian) 
Velvetleaf 
Waterhemp**** 
Wheat 
Witchgrass 
Wooly cupgrass 
 
 * To control Balsam apple, apply this product using handheld equipment only. 
 ** Control of Castor bean can also be achieved by injecting 4 ml of the concentrated (undiluted) product per plant into the lower 
portion of the main stem. 
 *** To control Spanish needles, apply 40 fl. oz. of this product per acre. 
**** A glyphosate-resistant biotype has been confirmed. For additional information, refer to the “WEED RESISTANCE 
MANAGEMENT” section of this label. You can also visit www.weedscience.org. 
 
Perennial Weeds 
Enhanced control of perennial weeds can be obtained when this product is applied to target weeds that are small and 
actively growing. New leaf development indicates active growth. If application must be made to larger weeds or to 
weeds that are slowly growing under stressful conditions, apply this product at a rate or spray solution concentration 
towards the upper end of the specified range. 
 
If weeds have been mowed or tilled, do not apply this product until plants have resumed active growth and have reached 
the specified stage of growth or sufficient growth has been achieved to allow for good interception of the spray solution. 
For enhanced control, do not mow, cut, till, burn or disturb vegetation in the application area for a minimum of 7 days 
after application. 
 
To control perennial weeds listed below using backpack or handheld equipment and low volume application technique, 
apply 3.1 to 6.2% solution of this product over the crown of the target plant to cover 50% of the upper plant foliage. 
 
To control perennial weeds using a handheld controlled droplet applicator (CDA), apply 14 to 28% solution of this 
product (18 to 36 fl. oz. of this product per gal. of spray solution) at a flow rate of 2 fluid ounces of spray solution per 
minute and a walking speed of 0.75 miles per hour (2 to 4 qt. of spray solution per acre). When using a vehicle-mounted 
CDA, apply the required amount of this product as indicated in the following table in 2 to 15 gallons of water per acre. 
 
Apply this product in the Fall before a killing frost. 
 
This product has no soil activity and does not control emergence of perennial weeds from seed and dormant 
underground roots, rhizomes or tubers present in the soil at the time of application. More than one application of this 
product will be necessary for continued control of weeds that emerge following application.

Page 126 of 143 
 
Perennial Weeds Rate 
(Qt./A) 
Handheld Sprayer Concentration 
(% Solution) 
Alfalfa* 1 to 1.25 1.3 
Alligatorweed* 2.5 0.9 
Apply this product when most of the target plants are in bloom. More than one 
application will be needed to achieve control. 
Anise (Fennel) 1.25 to 2.5 0.9 to 1.3 
Bahiagrass 1.9 to 3.1 1.3 
Beachgrass (European) 
(Ammophila arenaria) 
- 3.1 
Apply 3.1% solution of this product using a spray -to-wet technique or 7.5% solution 
using low volume application technique. Enhanced results can be obtained when 
application is made onto target weeds that are actively growing at the boot through the 
full heading stage of development. 
Apply prior to loss of more than 50% of green leaf color in the Fall. Monitor application 
site and reapply this product to any target weeds that were missed, if necessary, before 
reseeding the area with desirable vegetation. 
For selective control of European beachgrass, apply 30% solution of this product during 
period of activ e growth using a wiper applicator. Maximizing the amount of individual 
leaf tissue contacted by the wiper applicator and making a second pass in the opposite 
direction will improve control. Avoid contact of the herbicide solution with desirable 
vegetation. 
Bentgrass* 1 1.3 
This product alone will provide partial control of Bentgrass ( Agrostis spp.) only. For 
enhanced control, apply 1.5 to 2.1 qt. of this product in a tank -mix with an appropriate 
rate of Clethodim, Fluazifop -p-butyl, Fenoxaprop-p-ethyl + Fluazifop-p -butyl or 
Sethoxydim in a spray volume of 20 to 40 gal./A using broadcast application equipment. 
For enhanced control using a handheld sprayer, apply this product at a concentration of 
1.4 fl. oz./gal. of spray solution in a tank -mix with an appropriate amount of Clethodim, 
Fluazifop-p-butyl, Fenoxaprop-p-ethyl + Fluazifop-p-butyl or Sethoxydim. More than one 
application might be needed for complete control. 
Bermudagrass 3.1 1.3 
Apply when seed heads are present. 
Bermudagrass 
(Water) (Knotgrass) 
1 1.3 
Bindweed (Field) 2.5 to 3.1 1.3 
For control, apply 2.5 to 3.1 qt. of this product per acre as a broadcast application west 
of the Mississippi River and 1.9 to 2.5 qt./A east of the Mississippi River when Bindweed 
is at or beyond full bloom. For enhanced results, apply in late Summer or Fall. 
Bluegrass (Kentucky) 1.25 1.3 
Apply when most target plants have reached the boot to head stage of development. 
When application is made prior to the boot stage, reduced control can result. In the Fall, 
make application before plants have turned brown. 
Blueweed (Texas) 2.5 to 3.1 1.3 
Apply 2.5 to 3.1 qt. of this product per acre west of the Mississippi River and 2.2 to 2.5 
qt./A east of the Mississippi River when most target plants are at or beyond full bloom. 
For enhanced results, apply in late Summer or Fall. 
Brackenfern 1.9 to 2.5 0.9 
Apply to fully expanded fronds that are at least 18 inches long. 
Bromegrass (Smooth) 1.25 1.3 
 Apply this product when most target plants have reached the boot to head stage of 
development. When application is made prior to the boot stage, reduced control can 
result. In the Fall, make application before plants have turned brown. 
Bursage (Woolyleaf) - 1.3 
Canarygrass (Reed) 1.25 to 1.9 1.3 
Apply this product when most target plants have reached the boot to head stage of 
development. When application is made prior to the boot stage, reduced control can 
result. In the Fall, make application before plants have turned brown.

Page 127 of 143 
 
Cattail 1.9 to 3.1 1.3 
Apply this product when target plants are actively growing and are at or beyond the early 
to full bloom stage of development. Enhanced results are achieved when application is 
made during the Summer or Fall months. 
Clover (Red, White) 1.9 to 3.1 1.3 
Cogongrass 1.9 to 3.1 1.3 
Apply this product in late Summer or Fall when Cogongrass is at least 18 inches tall and 
actively growing. Due to uneven stages of growth and the dense nature of Cogongrass 
vegetation, more than one application might be necessary to achieve control. 
Dallisgrass 1.9 to 3.1 1.3 
Dandelion 1.9 to 3.1 1.3 
Dock (Curly) 1.9 to 3.1 1.3 
Dogbane (Hemp) 2.5 1.3 
Apply this product when most target plants have reached the late bud to flower stage of 
growth. For enhanced results, make application in late Summer or Fall. 
Fescue (Tall) 1.9 1.3 
Apply this product when most target plants have reached the boot to head stage of 
growth. If applied prior to the boot stage, less than desirable control might be obtained. 
Fescue (except Tall) 2.5 1.3 
Guineagrass 1.9 0.9 
Apply this product when most target plants have at least reached the 7 leaf growth 
stage. 
Hogweed, Giant - - 
Inject 5 ml of a 5% solution of this product into one leaf cane per plant, 12 inches above 
the root crown.** 
Horsenettle 1.9 to 3.1 1.3 
Horseradish 2.5 1.3 
Apply this product when most target plants have reached the late bud to flower stage of 
development. For enhanced results, apply in late Summer or Fall. 
Horsetail, Field - - 
Inject 0.5 ml of this product per stem directly into the plant stem, one segment above 
the root crown.** 
Iceplant 1.25 1.3 to 1.9 
Ivy (Cape, German) 1.25 to 2.5 0.9 to 1.3 
Jerusalem artichoke 1.9 to 3.1 1.3 
Johnsongrass 1.25 to 1.9 0.9 
Apply this product when most target plants have reached the boot to head stage of 
development or before plants have turned brown in the Fall. When applied prior to the 
boot stage, reduced control can result. 
Kikuyugrass 1.25 to 1.9 1.3 
Knapweed 2.5 1.3 
Apply this product when most target plants have reached the late bud to flower stage of 
growth. For enhanced results, apply in late Summer or Fall. 
Knotweed (Bohemian, 
Giant, Japanese) 
 2.5 1.9

Page 128 of 143 
 
Apply 2.5 qt. of this product per acre as a broadcast application in 3 to 40 gallons of 
spray solution. For application using a backpack sprayer and a spray-to-wet technique, 
apply a 1.9% solution. For enhanced control, do not disturb vegetation in the application 
area for at least 7 days after application. 
Control can also be achieved by cutting stems cleanly just below the 2nd or 3rd node 
above the ground and immediately apply 0.36 fluid ounce (10 ml) of a 50% solution of 
this product in water into the ”well” or remaining internode. Ensure that the upper pl ant 
material that was removed is gathered and properly discarded to prevent new plants 
from propagating from sprouting buds. Use of a bio-barrier (e.g., cardboard, plywood or 
plastic sheeting) will help guard against the spread of plant material. The combined total 
application rate of this product must not exceed 5.6 qt./A.** 
Control can also be achieved by injecting 5 ml of this product per stem into the 2nd or 
3rd internode using a handheld injection device.** 
Lantana - 0.9 
Apply this product when most target plants are at or beyond the bloom stage of growth. 
Use the higher spray solution concentration on plants that have reached the woody 
stage of growth. 
Lespedeza 1.9 to 3.1 1.3 
Loosestrife (Purple) 1.65 0.9 to 1.3 
 Fall application must be made before a killing 
frost 
 
Lotus (American) 1.65 0.7 
Apply this product when most target plants are at or beyond the bloom stage of growth. 
Enhanced results can be achieved when application is made during Summer or Fall 
months before a killing frost. More than one application of this product might be 
necessary to control regrowth of underground plant parts and seeds. 
Milkweed (Common) 1.9 1.3 
Apply this product when most target plants have reached the late bud to flower stage of 
growth. 
Muhyl (Wirestem) 1.25 1.3 
Make application when most target plants are at least 8 inches in height (3 to 4 leaf 
stage of development) and actively growing. 
Mullein (Common) 1.9 to 3.1 1.3 
Napiergrass 1.9 to 3.1 1.3 
Nightshade (Silverleaf) 1.25 1.3 
Apply 2.5 to 3.1 qt./A as a broadcast application west of Mississippi River and 1.9 to 2.5 
qt./A east of Mississippi River when most target plants are at or beyond full bloom. 
For enhanced results, apply in the late Summer or Fall after berries have formed. 
Nutsedge 
(Purple, Yellow) 
1.9 0.9 to 1.3 
Apply this product to control existing nutsedge plants and attached immature nutlets 
when target plants are in flower or when new nutlets can be found at rhizome tips. 
Nutlets that have not germinated will not be controlled and will require repeated 
application of this product for long term control. 
Orchardgrass 1.25 1.3 
Apply when most target plants have reached the boot to head stage of development. 
When applied prior to the boot stage, less than desirable control could be obtained. In 
the Fall, make application before plants have turned brown. 
Oriental bittersweet 1.9 1.3 
To control Oriental bittersweet, apply this product as a broadcast spray in 30 to 40 
gallons of spray solution per acre. For enhanced results, ensure complete coverage of 
the target plant with the spray solution. 
Pampasgrass 1.9 to 3.1 0.9 to 1.3 
Paragrass 1.9 to 3.1 1.3 
More than one application of this product will be needed to achieve complete control. 
Allow plants to regrow to the 7 to 10 leaf stage before making next application.

Page 129 of 143 
 
Pepperweed (Perennial) 2.5 1.3 
Phragmites* 1.9 to 3.1 0.9 to 1.3 
For partial control of Phragmites in Florida and the counties of other states bordering 
the Gulf of Mexico, apply 3.1 qt. of this product per acre as a broadcast application or a 
1.3% solution using a handheld sprayer. In other areas of the U.S., apply 1.65 to 2.5 
qt./A as a broadcast application or for partial control, apply a 0.7% solution using a 
handheld sprayer. For enhanced results, make application in late Summer or Fall when 
plants are actively growing and in full bloom. Due to the dense nature of this vegetation 
which can prevent good spray coverage and uneven stages of grow th, more than one 
application of this product might be necessary to achieve control. Visual symptoms of 
control will be slow to develop. 
Poison hemlock 1.25 to 2.5 0.9 to 1.3 
Control can also be achieved by injecting 5 ml of a 5% solution of this product using a 
handheld injection device in one leaf cane per plant, 12 inches above the root crown.** 
Pokeweed (Common) 1 1.3 
Apply to actively growing target plants up to 24 inches tall. 
Quackgrass 1.25 to 1.9 1.3 
Apply this product when most target plants are at least 8 inches in height (3 to 4 leaf 
stage of development) and actively growing. 
Redvine* 1.25 1.3 
Reed (Common, Giant) 2.5 to 3.1 1.3 
Enhanced results can be obtained when application is made in late Summer or Fall. 
Control can also be achieved by injecting 5 ml of this product (undiluted) directly into 
the 2nd or 3rd internode using a handheld injection device.** 
Ryegrass (Perennial) 1.25 to 1.9 0.9 
Apply this product when most target plants have reached the boot to head stage of 
growth. When applied prior to the boot stage, reduced control can result. In the Fall, 
make application before Ryegrass turns brown. 
Smartweed (Swamp) 1.9 to 3.1 1.3 
Spatterdock 2.5 0.7 
Apply when most target plants are in full bloom. For enhanced results, apply in the 
Summer or Fall. 
Sowthistle (Perennial) 1.25 to 1.9 1.3 
Spurge (Leafy)* - 1.3 
Starthistle (Yellow) 1.25 1.3 
Sweet potato (Wild)* - 1.3 
Apply when most target plants are at or beyond the bloom stage of growth. More than 
one application will be needed to achieve control. 
Thistle (Artichoke) 1.25 to 1.9 0.9 to 1.3 
Apply when target plants are at or beyond the bud stage of growth. 
Thistle (Canada) 1.25 to 1.9 1.3 
Apply when target plants are at or beyond the bud stage of growth. 
Control can also be achieved by stem injection. Cut 8 to 9 of tallest plants in a clump at 
bud stage. Push a cavity needle into the stem center and then slowly remove it as you 
inject 0.5 ml of this concentrated (undiluted) product into the stem.** 
Timothy 1.25 to 1.9 1.3 
Apply when most target plants have reached the boot to head stage of development. If 
application is made prior to the boot stage, reduced control can result. In the Fall, make 
application before plants turn brown. 
Torpedograss* 2.5 to 3.1 1.3 
Trumpetcreeper* 1.25 to 1.9 1.3 
Tules (Common) - 1.3 
Apply to target plants at or beyond the seed head stage of development. Visual 
symptoms will be slow to appear and might not appear for 3 or more weeks after 
application. 
Vaseygrass 1.9 to 3.1 1.3

Page 130 of 143 
 
Velvetgrass 1.9 to 3.1 1.3 
Wheatgrass (Western) 1.25 to 1.9 1.3 
Apply when most target plants have reached the boot to head stage of development. 
Application made prior to the boot stage could result in reduced control. In the Fall, make 
application before plants turn brown. 
 * Partial control. 
** When using stem injection, the combined total use of this product must not exceed 6.75 qt./A per year. At 5 ml of 
concentrated (undiluted) product per stem, 6.75 qt. will treat approximately 1,300 stems per acre per year. The 
number of stems that can be treated per acre will vary depending on the injection volume and the concentration 
of this product in the application solution. 
 
Woody Brush, Trees and Vines 
Unless otherwise directed, apply this product to brush and trees that are actively growing after full leaf expansion. Use 
a higher application rate or spray solution concentration within the given range for control of larger brush and trees 
and/or for application in areas of dense vegetative growth, or for the control of vines that have reached the woody stage 
of growth. 
 
Enhanced control of woody brush and trees can be obtained when application is made in late Summer or Fall after fruit 
formation. However, in arid areas, enhanced control can be obtained when application is made in the Spring to early 
Summer when brush and trees are at high moisture content and flowering. Poor control can be expected when this 
product is applied to drought stressed brush and trees. 
 
When applying this product using a spray-to-wet technique with a handheld sprayer to control tough woody brush and 
trees, use a 1.3% solution of this product. 
 
Some autumn color on undesirable deciduous species is acceptable when applying this product to brush and trees in 
the Fall provided no major leaf drop has occurred. Reduced performance of this product could result if application is 
made following a frost. Symptoms might not appear prior to frost or senescence following a Fall application. 
 
Repeat applications of this product might be required to control plants regenerating from underground parts or from 
seed. 
 
For enhanced results, allow 7 or more days after application before mowing, cutting, tilling, burning or removal of woody 
brush, trees and vines from that application site. Additional applications of this product will be needed to control brush 
and trees regenerating from underground parts or seed. 
 
TANK-MIXTURES: This product may be applied at any rate stated on this label in a tank -mixture other products 
(examples are listed below) to increase the spectrum of control of herbaceous weeds, woody brush, trees and vines. 
 
For control of herbaceous weeds, apply the tank -mix product at the lower end of the given appl ication rate or spray 
solution concentration range. For control of dense stands or hard-to-control woody brush, trees and vines, increase the 
application rate or spray solution concentration of the tank-mix product towards the higher end of the range. 
 
Imazapyr Metsulfuron-methyl Triclopyr 
 
Ensure that the proper amount of product(s) containing Triclopyr is thoroughly mixed with water in the spray tank 
according to label directions before adding this product. 
 
It is the pesticide user’s responsibility to ensure that all products are register ed for the intended use. Read and follow 
the applicable restrictions and limitations and directions for use on all product labels involved in tank -mixing. Users 
must follow the most restrictive directions for use and precautionary statements of each product in the tank-mixture. 
 
Cut Stump Application 
This product may be used to control regrowth and resprouting of woody brush and trees on any site listed on this label. 
 
Cut the woody brush or tree close to the soil surface and immediately apply a 50 to 100% (undiluted) solution of this 
product to the freshly cut surface using an applicator capable of applying this product to the entire cambium. A delay in 
application could result in reduced performance. For enhanced results, cut the woody brush or tree during period of 
active growth and full leaf expansion and apply this product. 
 
For control of the tree of heaven ( Ailanthus altissima), cut the tree close to the soil surface and immediately apply a 
50% solution of this product (16 fl. oz./qt. of solution) and an appropriate rate of Imazapyr in water to the freshly cut 
surface.

Page 131 of 143 
 
DO NOT MAKE A CUT STUMP APPLICATION WHEN THE ROOTS OF DESIRABLE WOODY BRUSH OR TREES 
MIGHT BE GRAFTED TO THE ROOTS OF THE CUT STUMP, AS INJURY COULD OCCUR IN THE ADJACENT 
TREES. Some sprouts, stems, or trees can share a common root system. Adjacent trees having a similar age, height 
and spacing could be an indicator of a shared root system. Whether grafted or shared, injury is likely to occur to adjacent 
stems or trees when this product is applied to one or more trees sharing a common root system. 
 
Woody Brush and Tree Injection and Frill Application 
This product may be used to control woody brush and trees listed in this section by injection or frill application on any 
site listed on this label. 
 
Inject or apply the equivalent of 1 milliliter (0.04 fl. oz.) of this product for every 2 to 3 inches of trunk diameter at breast 
height (DBH). If injecting this product into the woody brush or tree, use equipment capable of penetrating into the living 
plant tissue under the bark. 
 
For frill application, apply a 50 to 100% (undiluted) solution of this product in water to either a continuous frill around 
the tree or to cuts evenly spaced around the tree below all branches. As tree diameter increases, enhanced results can 
be achieved by applying this product to a continuous frill or to more closely spaced cuttings. Avoid application 
techniques that allow runoff of this product to occur from frilled or cut areas. In species that freely exude sap, make the 
frill or cuts at an oblique angle to produce a cupping effect and apply this concentrated product undiluted. For enhanced 
results, make this application during period of active growth and after full leaf expansion. 
 
Modified High-Volume and Low-Volume Backpack Application 
For control or partial control of listed woody brush, trees and vines when using a backpack sprayer or other handheld 
equipment and a directed low-volume foliar application technique, apply 3.1 to 6.2% solution of this product evenly over 
the plant crown to cover 50% of the upper foliage of undesirable woody brush, trees and vines. 
 
Woody brush, trees and 
vines 
Rate 
(Qt./A) 
Handheld Spray-To-Wet 
Concentration 
(% Solution) 
Alder 1.9 to 2.5 0.9 
Ash* 1.25 to 3.1 0.9 to 1.3 
Aspen (Quaking) 1.25 to 1.9 0.9 
Bearmat (Bearclover)* 1.25 to 3.1 0.9 to 1.3 
Beech* 1.25 to 3.1 0.9 to 1.3 
Birch 1.25 to 1.9 0.9 
Blackberry 1.9 to 2.5 0.9 
Blackgum 1.25 to 3.1 0.9 to 1.3 
Bracken 1.25 to 3.1 0.9 to 1.3 
Broom (French, Scotch) 1.25 to 3.1 0.9 to 1.3 
Buckwheat (California)* 1.25 to 2.5 0.9 to 1.3 
Cascara* 1.25 to 3.1 0.9 to 1.3 
Castor bean - - 
For control, inject 4 ml of this product (undiluted) per plant directly into the lower 
portion of the main stem using a handheld injection device.** 
Catsclaw* - 0.9 
For partial control, apply this product when at least 50% of the new leaves are fully 
developed. 
Ceanothus* 1.25 to 3.1 0.9 to 1.3 
Chamise* 1.25 to 3.1 0.9 
Cherry (Bitter, Black, Pin) 1.25 to 1.9 0.9 
Coyote brush 1.9 to 2.5 0.9 to 1.3 
For control, apply this product when at least 50% of the new leaves are fully 
developed. 
Deerweed 1.25 to 3.1 0.9 
Dogwood* 1.25 to 3.1 0.9 to 1.3 
Elderberry 1.25 to 1.9 0.9 
Elm* 1.25 to 3.1 0.9 to 1.3

Page 132 of 143 
 
Eucalyptus - 1.3 
To control Eucalyptus resprouts, apply this product using a handheld sprayer when 
resprouts are 6 to 12 feet tall. Ensure complete coverage. 
Florida holly 
(Brazilian peppertree)* 
1.25 to 3.1 0.9 to 1.3 
Gallberry 1.25 to 3.1 0.9 to 1.3 
Gorse* 1.25 to 3.1 0.9 to 1.3 
Hackberry (Western) 1.25 to 3.1 0.9 to 1.3 
Hasardia* 1.25 to 2.5 0.9 to 1.3 
Hawthorn 1.25 to 1.9 0.9 
Hazel 1.25 to 1.9 0.9 
Hickory* 1.25 to 3.1 0.9 to 1.3 
Honeysuckle 1.9 to 2.5 0.9 
Hornbeam (American)* 1.25 to 3.1 0.9 to 1.3 
Kudzu 2.5 to 3.1 1.3 
Locust (Black)* 1.25 to 2.5 0.9 to 1.3 
Madrone (Resprouts)* - 1.3 
Manzanita* 1.25 to 3.1 0.9 to 1.3 
Maple (Red) 1.25 to 2.5 0.9 
For control, apply a 0.9% solution of this product using a handheld sprayer when 
leaves are fully developed. For partial control, apply 1.25 to 2.5 qt./A as a broadcast 
application. 
Maple (Sugar) - 0.9 
For control, apply this product using a handheld sprayer when at least 50% of the 
new leaves are fully developed. 
Maple (Vine)* 1.25 to 3.1 0.9 
Monkey flower* 1.25 to 2.5 0.9 to 1.3 
Oak (Black, White)* 1.25 to 2.5 0.9 to 1.3 
Oak (Northern, Pin) 1.25 to 2.5 0.9 
For control, apply this product when at least 50% of the new leaves are fully 
developed. 
Oak (Poison) 2.5 to 3.1 1.3 
Repeat application may be needed to maintain control. Make Fall applications 
before leaves lose green color. 
Oak (Post) 1.9 to 2.5 0.9 
Oak (Red) - 0.9 
For control, apply this product using a handheld sprayer when at least 50% of the 
new leaves are fully developed. 
Oak (Scrub)* 1.25 to 2.5 0.9 
Oak (Southern red) 1.25 to 1.9 0.9 
Orange (Osage) 1.1 to 3.1 0.9 to 1.3 
Persimmon* 1.25 to 3.1 0.9 to 1.3 
Pine 1.25 to 3.1 0.9 to 1.3 
Poison ivy 2.5 to 3.1 1.3 
Poplar (Yellow)* 1.25 to 3.1 0.9 to 1.3 
Redbud (Eastern) 1.25 to 3.1 0.9 to 1.3 
Rose (Multiflora) 1.25 0.9 
Make application prior to leaf deterioration caused by leaf feeding insects. 
Russian olive* 1.25 to 3.1 0.9 to 1.3 
Sage (Black) 1.25 to 2.5 0.9 
Sage (White)* 1.25 to 2.5 0.9 to 1.3

Page 133 of 143 
 
Sage brush (California) 1.25 to 2.5 0.9 
Salmonberry 1.25 to 1.9 0.9 
Saltcedar* 1.25 to 3.1 0.9 to 1.3 
For partial control, apply 0.9 to 1.3% solution of this product using a handheld 
sprayer or 1.25 to 3.1 qt./A as a broadcast application. For control, apply 0.9 to 
1.3% solution of this product in a tank -mix with Imazapyr herbicide using a 
handheld sprayer. 
For control using broadcast application, apply 1.25 qt. of this product per acre in a 
tank-mix with an appropriate rate of Imazapyr to plants less than 6 feet tall. To 
control Saltcedar greater than 6 feet tall using broadcast application, apply 2.6 qt./A 
of this product in a tank-mix with a higher rate of Imazapyr. 
Sassafras* 1.25 to 3.1 0.9 to 1.3 
Sourwood* 1.25 to 3.1 0.9 to 1.3 
Sumac (Laurel, Poison, 
Smooth, Sugarbush, 
Winged)* 
1.25 to 2.5 0.9 to 1.3 
Sweetgum 1.25 to 1.9 0.9 
Swordfern* 1.25 to 3.1 0.9 to 1.3 
Tallowtree (Chinese) - 0.9 
Tan oak (Resprouts)* - 1.3 
Thimbleberry 1.25 to 1.9 0.9 
Tobacco (Tree)* 1.25 to 2.5 0.9 to 1.3 
Toyon* - 1.3 
Trumpetcreeper 1.25 to 1.9 0.9 
Vine maple* 1.25 to 3.1 0.9 to 1.3 
Virginia creeper 1.25 to 3.1 0.9 to 1.3 
Waxmyrtle (Southern)* 1.25 to 3.1 0.9 to 1.3 
Willow 1.9 to 2.5 0.9 
Yerba santa* - 1.3 
*Partial control

Page 134 of 143 
 
 
WARRANTY—CONDITIONS OF SALE 
OUR DIRECTIONS FOR USE of this product are based upon tests believed reliable. Follow directions carefully. Timing 
and method of application, weather and crop conditions, mixture with other chemicals not specifically directed and other 
influencing factors in the use of this product are beyond the control of the Seller. To the extent consistent with applicable 
laws, Buyer assumes all risks of use, storage and handling of this material not in strict accordance with directions given 
herewith. To the extent consistent with applicable laws, in no case shall the Manufacturer or the Seller be liable for 
consequential, special or indirect damages resulting from t he use or handling of this product when such use and/or 
handling is not in strict accordance with directions given herewith. To the extent consistent with the applicable law, the 
foregoing is a condition of sale by the Seller and is accepted as such by the Buyer. 
 
 
 
 Manufactured By: 
 
 
 
 
 
DUPLIKATOR and the DREXEL logo are registered trademarks of Drexel Chemical Company. All other brand names, product names 
or trademarks belong to their respective holders. 
 
 
 
 
 
 
 
 
 
 
 
STORAGE AND DISPOSAL 
Do not contaminate water, food or feed by storage or disposal. 
PESTICIDE STORAGE: Store in original container. Keep container tightly closed. Keep away from heat and flame. 
Store pesticides away from food, pet food, feed, seed, fertilizers, and veterinary supplies. Keep container closed to 
prevent spills and contamination. 
PESTICIDE DISPOSAL: To avoid waste, use all materials in this container by application according to label 
directions. If wastes cannot be avoided, offer remaining product to a waste disposal facility or pesticide disposal 
program (often, such programs are run by State or local governments or by industry). 
CONTAINER HANDLING: 
Nonrefillable Container (rigid material; < 5 gallons): Nonrefillable container. Do not reuse or refill this container. 
Clean container promptly after emptying. Triple rinse as follows: Empty the remaining contents into application 
equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container one-fourth full with 
water and recap. Shake for 10 seconds. Pour rinsate into application equipmen t or a mix tank or store rinsate for 
later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Offer 
for recycling, if available, or dispose of empty container in a sanitary landfill or by or by other procedures allowed by 
state and local authorities. 
Nonrefillable Container (rigid material; > 5 gallons up to < 250 gallons): Nonrefillable container. Do not reuse 
or refill this container. Clean container promptly after emptying. Triple rinse as follows: Empty the remaining contents 
into application equipment or a mix tank. Fill the container one-fourth full with water. Replace and tighten closures. 
Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand 
the container on its end and tip it back and forth several times. Turn the container over onto its other end and tip it 
back and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use 
or disposal. Repeat this procedure two more times. Offer for recycling, if available, or dispose of empty container in 
a sanitary landfill or by or by other procedures allowed by state and local authorities. 
Refillable Container (> 250 gallons & Bulk): Refillable container. Refill this container with pesticide only. Do not 
reuse this container for any other purpose. Cleaning the container before final disposal is the responsibility of the 
person disposing of the container. Cleaning before refilling is the responsibility of the refiller. To clean the container 
before final disposal, empty the remaining contents from this container into application equipment or mix tank. Fill 
the container about 10% full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or 
pump rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times. 
Offer for recycling, if available, or dispose of empty container in a sanitary lan dfill or by or by other procedures 
allowed by state and local authorities.

Page 135 of 143 
 
[SUB-LABEL 3: RESIDENTIAL USES*] 
[Editorial Notes: Bracketed text [ ] is for internal use or serves as a 'place holder' for graphics. 
Parenthetical text () denotes optional wording.] 
[Refer to APPENDIX 1 for consolidated list of label claims.] 
[Refer to APPENDIX 2 for packaging related claims/instructions] 
*Intended To Be Applied By Certified/Professional Applicators 
 
Duplikator® K-Max 
Herbicide 
 
ACTIVE INGREDIENT: 
 Glyphosate in the form of its potassium*........................................................................................ 51.2% 
OTHER INGREDIENTS: ………………………………………………………………………………. 48.8% 
 TOTAL: ........................................................................................................................................100.0% 
* This product contains 5.88 pounds per U.S. gallon of glyphosate in the form of its potassium salt equivalent to 4.8 pounds per U.S. 
gallon of glyphosate acid. 
KEEP OUT OF REACH OF CHILDREN 
CAUTION 
(See First Aid Below) 
(See Side Panel for FIRST AID) (See Page ____ for FIRST AID) 
(See Back Panel for FIRST AID) 
 (See Attached Booklet (Labeling) for Complete Directions for Use) 
(Please read the) (See) (inner label) (inner peel-back label) (booklet) for (first aid) (precautionary 
statements) (storage and disposal) (directions for use) 
 
EPA Reg. No. 19713-XXX 
EPA Est. No. 19713-XX-X Net Content: _______ 
 
FIRST AID 
IF IN EYES: 
• Hold eye open and rinse slowly and gently with water for 15 to 20 minutes. 
• Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. 
• Call a poison control center or doctor for treatment advice. 
Have the product container or label with you when calling a poison control center or doctor, or going for treatment. You 
may also call CHEMTREC at 800 424-9300 for emergency medical treatment information. 
 
[OPTIONAL TEXT] 
Guaranteed Satisfaction. Open (booklet for details).* Resealable Label for Directions & Precautions 
(Press to Reseal) 
Product Facts 
Makes up to [ ] gallons 
Treats up to [ ] sq. ft. (approx. size of [ ] tennis courts) 
[See Appendix 2 for calculations] 
KILLS WEEDS [Illustrate grassy, broadleaf and woody weeds] 
(KILLS ALL TYPES OF WEEDS & GRASSES) 
[For products where an anti-theft device has been added] 
[This bottle contains an anti-theft device, either inside or on the back of the bottle. It does not affect Performance of 
this product.]

Page 136 of 143 
 
KMaxSP3-0121*P 
PRECAUTIONARY STATEMENTS 
Hazards to Humans and Domestic Animals 
CAUTION: Causes moderate eye irritation. Avoid contact with eyes or clothing. Wash thoroughly with 
soap and water after handling. 
 
[Optional Re-entry icon] 
To prevent tracking product to unintended areas such as your yard, keep people and pets out of treated 
area until spray has dried. 
 
[ALTERNATE TEXT] People and pets may enter treated area after spray has dried. 
 
ENVIRONMENTAL HAZARDS 
To protect the environment, do not allow pesticide to enter or run off into storm drains, drainage ditches, 
gutters or surface waters. Applying this product in calm weather when rain is not predicted for the next 24 
hours will help to ensure that wind or rain does not blow or wash pesticide off the treatment area. Rinsing 
application equipment over the treated area will help avoid run off to water bodies or drainage systems. Do 
not apply directly to water, or to areas where surface water is present or to intertidal areas below the mean 
high water mark. Do not contaminate water when disposing of equipment washwater or rinsate. 
 
NON-TARGET ORGANISM ADVISORY 
This product is t oxic to plants and may adversely impact the forage and habitat of non- target organisms, 
including pollinators, in areas adjacent to the treated site. Protect the forage and habitat of non- target 
organisms by following label directions intended to minimize spray drift. 
 
PHYSICAL AND CHEMICAL HAZARDS 
Do not mix or allow to contact oxidizing agents. Hazards chemical reaction may occur. 
Apply with plastic or stainless steel tank -type sprayer. DO NOT apply with galvanized or unlined steel 
(except stainless steel) sprayer or through any irrigation system. 
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
HOW IT WORKS 
[Insert Brand Name] (This Product) is absorbed by the weed's leaves. It moves through the weed to the root, stopping 
the production of an essential enzyme found in plants. Weeds die, roots and all- so weeds (they) don't grow back. Kills 
only what you spray. Any product not absorbed by the plant breaks down into natural materials without moving in or on 
the soil to untreated plants. (Weeds usually yellow and wilt within 2 to 4 days with complete kill in 1 to 2 weeks.) 
[ALTERNATE TEXT] [Insert brand name] (This product) enters plants through foliage and moves systemically to the 
roots, killing weeds by stopping the production of a substance found in plants. Any of this product not absorbed by 
plants breaks down into natural materials without moving in or on the soil to untreated plants. Weeds (usually) yellow 
and wilt within 2 to 4 days with complete kill in 1 to 2 weeks. 
WHERE TO USE 
• On patios, walkways, driveways, gravel or mulch beds 
• Along fences 
• In areas where weeds are invading your yard/property 
• For lawn replacement 
• For garden plot preparation 
• (Other areas in (of) your yard/property)

Page 137 of 143 
 
 
AMOUNT TO USE 
For best results: 2 fluid ounces (4 Tbsp.) per gallon of water (for established or tough (tough-to-control) weeds) 
[OPTIONAL TEXT] For easy to kill weeds such as seedlings, add 1 fluid ounce (2 Tbsp.) per gallon of water. 
MIXING INSTRUCTIONS 
[Optional tank sprayer illustration] 
TANK SPRAYER 
Use of a quality brand (Tank (Pump-Up) Sprayer) is recommended. A plastic, fiberglass, plastic-lined steel or 
stainless steel sprayer may also be used. 
[OPTIONAL TEXT] For easy to kill weeds such as seedlings, add 1 fluid ounce (2 Tbsp.) to 1 gallon of water. 
(For tough established weeds, for best results,) add 2 fluid ounces (4 Tbsp.) to 1 gallon of water. 
Spot treat or spray evenly over 300 square feet. 
[Optional Dial ‘N Spray illustration] 
HOSE-END SPRAYER 
For large areas, consider using the [insert brand name] 
• Set dial to 2 fl. oz. 
• To sprayer jar, add 2 fluid ounces ( 4 Tbsp.) for each 300 square feet. DO NOT add water. 
• Spray evenly over measured area. 
• After spraying, unused product can be poured back into its original container. 
 
[Optional 1.33 Gallon sprayer illustration] 
1.33 GALLON SPRAYER 
• Add 5 fluid ounces (10 Tbsp.) (the entire contents of this container) (the 5 fl. oz. Refill) [Insert Brand Name] (this 
product) to the empty sprayer and fill very slowly with water to prevent foaming. 
OR 
• Add 5 fluid ounces (10 Tbsp.) of this product to the empty sprayer and fill very slowly with water to prevent foaming. 
1 Tablespoon (Tbsp.) = 3 Teaspoons (Tsp.) 1 fl. oz. = 2 Tablespoons (Tbsp.) 
Do not (mix, store or) apply with (in) a galvanized or unlined steel (except stainless steel) sprayer or through any 
irrigation system. 
 
USE RESTRICTIONS: 
Ground Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Aerial Maximum Single Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
Maximum Annual Application Rate: 213 fl. Oz/Ac (8 Lbs AE/Ac) 
 
HOW TO APPLY 
• Spray the weeds or grasses you want to kill until thoroughly wet. 
• When spot treating weeds around desirable plants, shield plants from drift with a sheet (piece) of cardboard or 
plastic. If desirable plants are accidentally sprayed, rinse off immediately with water.

Page 138 of 143 
 
IMPORTANT: Do not spray plants or grasses you like - they will die. Not recommended for spot weed control in 
lawns since Glyphosate (this product) kills lawn grasses. 
 
WHEN TO APPLY 
• Apply when weeds are actively growing. (Use anytime weeds and grasses are actively growing.) 
• For best results, apply during warm, sunny weather (above 60° F) (to accelerate systemic movement from foliage 
to roots.) 
• Apply when air is calm to prevent drift to desirable plants. 
• If used to control weeds around fruit or nut trees, Caneberries or Grapevines, allow 17 days before harvesting. 
• [OPTIONAL TEXT] Apply when weeds are small and before seeds form. Established (Hard to kill) weeds may require 
a repeat application. 
 
WHEN TO REPLANT 
• All ornamental Flowers, trees and shrubs may be planted 1 day after application. 
• Lawn grasses, herbs, vegetables (all), and fruits may be planted 3 days after application. 
 
HOW TO CLEAN SPRAYER 
Rinse sprayer and all sprayer parts three times with water after use. Spray rinse water on bare soil or gravel. After 
cleaning, sprayer may be used for other products. 
 
ADDITIONAL INSTRUCTIONS 
 
To Kill Vines 
• If vines are growing up fences, poles, or tree trunks with mature bark, cut vines to a height of 3 to 4 feet and spray 
thoroughly the vines. 
• If vines are climbing shrubs or tree trunks with green bark, cut vines at the base and treat as directed for stumps 
below or spray regrowth. If spraying regrowth, shield shrubs or green bark from spray drift with a (piece) sheet of 
plastic or cardboard. 
 
To Kill Bamboo 
• Cut canes close to the ground. 
• Make cut just below a stem joint to create a hollow stem reservoir. 
• Pour 1 tablespoonful of undiluted product into the hollow stem reservoir. 
• Browning of the canes will occur in 7 to 14 days. 
• Spray foliage if regrowth occurs. 
 
To Kill Stumps 
• Cut living stump close to ground. 
• Drive (drill) 4 to 5 holes into freshly cut stump. 
• Immediately pour undiluted product into holes. 
 
IMPORTANT: Some trees may share the same root system. Adjacent trees having a similar age, height and spacing 
may signal a shared roots system. Injury may occur to non-treated trees when one or more trees sharing common roots 
are treated. 
 
For Lawn Replacement 
Use this product to kill (an old) lawn and weeds before planting new lawn. 
• Skip one mowing before spraying. 
• Use 2 fluid ounces (4 Tbsp.) of this product per gallon of water for each 300 square feet. 
• If soil is dry, water before application and 2 to 3 days after application. 
• Reapply if green patches remain after 7 days. 
• Wait (at least) 3 days after last application to rake, till or replant with seed or sod. 
 
For Kudzu 
• For best results, apply this product in mid to late summer when vines are mature and actively growing. 
 
For Wild Blackberry 
• Spray actively growing plants anytime. Dead canes should be cut down and removed. Reapplication is often 
needed to kill deep roots.

Page 139 of 143 
 
 
For Poison Ivy and Poison Oak 
• Contact with these plants anytime of the year can cause allergic reactions. Spray actively growing plants anytime, 
but at least 4 weeks prior to first killing frost in the Fall. 
• Reapply if new growth appears. Wear rubber gloves to handle dead plants. Dispose of plants and rubber gloves in 
tightly sealed garbage bags. 
 
To Prepare Flowerbed and Garden (Plot) 
• Use this product to kill grasses, weeds, and brush before planting Flowers, fruits, herbs, trees and shrubs or 
vegetables. 
• If soil is dry, water before application and 2 to 3 days after application. 
• Use 2 fluid ounces (4 Tbsp.) per gallon of water for each 300 square feet. Apply evenly over treatment area. 
• Wait 1 to 3 days before planting garden (Flowers, trees and shrubs). See “When to (Reseed or) Replant (Sprayed 
Areas)” section for details. 
 
WHEN TO (RESEED OR) REPLANT [SPRAYED AREAS) 
 
• The following may be planted 1 day after application of this product: All ornamental Flowers, trees and shrubs. 
 
• The following may be planted 3 days after application of this product: Fruits, Herbs, Lawn grasses, Vegetables (all) 
 
WHEN TO HARVEST 
If this product is used to control weeds around fruits or nuts, allow the following number of days before harvesting: 
 
FRUITS AND NUTS Number of Days After Last Application 
of this Product 
Citrus (Citron, Grapefruit, Lemon, Lime, Mandarin, Orange, 
Tangelo, and Tangerine) 
1 
Nuts (Almonds, Beechnut, Cashew, Chestnut, Hazelnut, Pecan, 
Pistachio, Walnut) 
14 
Apples, Avocado, Bananas (Plantains), Berries (except 
Cranberries), Dates, Figs, Grapes, Kiwi fruit, Loquat, Passion fruit, 
Pears, Persimmon, Pomegranate, Quince 
14 
Apricot, Cherries, Nectarines, Olives, Peaches, Plums, Prunes 17 
 
(OR) 
 
[The following statement may instead be placed in the “When To Apply” section] If used to control weeds around fruit 
or nut trees, Caneberries or Grapevines, allow 17 days before harvesting. 
 
[OPTIONAL SECTION] 
KILLS ALL TYPES OF (BROADLEAF) WEEDS & GRASSES, (BRUSH [TOUGH WEEDS], 
UNWANTED TREES, SHRUBS & VINES) 
 
(Broadleaf) Weeds 
Artichoke thistle, Beggarweed, Black medic, Blue mustard, Blue toadflax, Brassbuttons, Broadleaf plantain, Burclover, 
Buttercup, Canada thistle, Cattail, Chickweed, Cocklebur, Com mon groundsel, Common mullein, Common plantain, 
Common ragweed, Creeping beggarweed, Creeping-charlie, Curly dock, Dandelion, Dog fennel, Evening primrose, 
False dandelion, Fiddleneck, Field bindweed (Wild morningglory), Field pennycress, Filaree, Florida pusley, Garden 
spurge, Henbit, Horsenettle, Horseradish, Horseweed/Marestail, Iceplant, Knapweed, Knotweed, Lambsquarters, 
Lantana, Little bittercress, London rocket, Mallow, Mayweed, Milkweed, Mouseear chickweed, Narrowleaf (Buckhorn) 
plantain, Nightshade (Silverleaf), Oldenlandia, Oxalis, Pennsylvania smartweed, Pennywort, Poison hemlock, Prickly 
lettuce, Primrose, Prostrate spurge, Puncturevine, Ragweed, Red clover, Redroot pigweed, Shepherdspurse, Smooth 
catsear, Smooth pigweed, Sowthistle, Spotted spur ge, Tansy ragwort, Tansymustard, Teaweed, Trumpetcreeper, 
Tumble mustard, Virginia creeper, White clover, Whitetop, Wild barley, Wild mustard, Wild oats, Wild sweet potato, 
Yellow starthistle and other broadleaf weeds.

Page 140 of 143 
 
Grasses 
Annual bluegrass, Annual ryegrass, Bahiagrass, Barnyardgrass, Bentgrass, Bermudagrass, Bromegrass, Cogongrass, 
Crabgrass, Creeping bentgrass, Dallisgrass, Fall panicum, Fescue, Field sandbur, Foxtail, Goosegrass, Guineagrass, 
Johnsongrass, Kentucky bluegrass, Kikuyugrass, Lovegrass, Maidencane, Nimblewill, Nutsedge, Orchardgrass, 
Pampas grass, Perennial ryegrass, Purple nutsedge, Quackgrass, Sandspur, Smooth bromegrass, Sprangletop, St. 
Augustinegrass, Tall fescue, Texas panicum, Timothy, Torpedograss, Vaseygrass, Witchgrass , Yellow nutgrass, 
Zoysia and other grassy weeds. 
 
Brush (Tough Weeds), Unwanted Trees, Shrubs & Vines 
Alder, Ash, (Quacking) Aspen, Bamboo, Blackberry, Bluegum eucalyptus, Broom (French, Scotch), Buckwheat, 
Ceanothus, Chamise, Cherry, Coyote brush, Dewberry, Elderberry, Elm, Eucalyptus, Giant reed, Hawthorn, Hazel, 
Honeysuckle, Kudzu, Locust, Madrone, Maple, Oak, Persimmon, Poison oak, Poison ivy, Poplar, Raspberry, Sage, 
Sagebrush, Salmonberry, Saltcedar, Sassafras, Sumac, Sweetgum, Tan oak, Thimbleberry , Tree tobacco, Wild rose 
(Multiflora), Willow and other tough weeds. 
 
[Back Panel location for guarantee box & Questions or Comments phone number] 
STORAGE AND DISPOSAL 
PESTICIDE STORAGE: Store in original container in a safe place away from direct sunlight. 
PESTICIDE DISPOSAL: Call your local solid waste agency for disposal instructions. Never place unused product 
down any indoor or outdoor drain. 
CONTAINER HANDLING: Nonrefillable container. Do not reuse or refill this container. If empty, place in trash or 
offer for recycling if available. If partially filled, call your local solid waste agency for disposal instructions. Never 
place unused product down any indoor or outdoor drain. 
 
 
WARRANTY – CONDITIONS OF SALE 
OUR DIRECTIONS FOR USE of this product are based upon tests believed reliable. Follow directions carefully. Timing 
and method of application, weather and crop conditions, mixtures with other chemicals not specifically directed, and 
other influencing factors in the use of this product ar e beyond the control of the Seller. To the extent consistent with 
applicable law, Buyer assumes all risks of use, storage and handling of this material not in strict accordance with the 
directions given herewith. To the extent consistent with applicable law, in no case shall the Manufacturer or the Seller 
be liable for consequential, special or indirect damages resulting from the use or handling of this product when such 
use and/or handling is not in strict accordance with the directions given herewith. The foregoing is a condition of sale 
by the Seller and is accepted as such by the Buyer. 
 
[ALTERNATIVE STATEMENTS 
• ([Insert Company Name]) guarantees this product to the extent of the purchase price, only when used according to 
directions on the label. To the extent consistent with applicable law, Buyer assumes all responsibility for safety and 
use not in accordance with this label.) 
• ([Insert Company Name]) guarantees this product to the extent of the purchase price, only when used according to 
directions on the label.) 
• (To the extent consistent with applicable law, Buyer assumes all responsibility for safety and use not in accordance 
with this label.)] 
 
 Manufactured By: 
 
DUPLIKATOR and the Drexel logo are registered trademarks of Drexel Chemical Company. All other brand names, product names, 
or trademarks belong to their respective owners.) 
(Brand Name) is a (registered) trademark of (Name of Company). All other brand names, produc t names, or trademarks belong to 
their respective owners.

Page 141 of 143 
 
APPENDIX 1 : Consolidated List of Label Claims 
[Ordered alphabetically] 
• To speed absorption to the root 
• Absorbed into both broad leaf and grassy weeds 
• Absorbs on contact, starts working immediately 
• Also use for large jobs including lawn renovation and vegetable and flower garden preparation 
• Approved for most (many) lawn and garden uses. 
• Begins absorbing on contact 
• Can be used for habitat restoration, controlling exotic vegetation, and for site preparation of wildlife food 
plots. 
• Can reseed or sod lawns 3 days after treatment 
• Concentrated for extra value 
• * Consumer Guarantee: If for any reason you are not satisfied after using this product, simply send us 
original proof of purchase and we will replace the product or refund the purchase price. 
• Covers up to 350 sq. ft. per gallon of spray 
• Covers up to [x sq. ft.] 
• Dead Weeds Guaranteed * (or Your Money Back) 
• Did You Know? 
• Does not have soil activity 
• Economical (concentrate formula) 
• Easy to apply with an Ortho Dial 'n Spray®, hose-end, tank or (hand held) trigger sprayer 
• *Intended To Be Applied By Certified/Professional Applicators 
• For general weed control - kills weeds and grasses in 2 to 4 weeks - roots and all 
• Great Quality. Great Price. Guaranteed* 
• *Our guarantee is our promise that you’ll be fully satisfied with the quality of every (brand name) 
product. If for any reason, you aren’t happy (satisfied), we will replace it or return your money – 
whichever you prefer. All you need to do is return the empty packaging. It’s that simple. Guaranteed. 
Guaranteed within 1 year of the date of purchase. 
• Great Value 
• Guaranteed * (Satisfaction) 
• Guaranteed * 
• Guaranteed Satisfaction. Open booklet for details 
• How To Use 
• Kills almost all (annual and perennial) weeds, grasses and other unwanted plants 
• Kills existing weeds only, no residual activity in soil 
• Kills more weeds in more places 
• Kills over 100 weeds 
• Kills the root so (treated) weeds don't [won’t grow back] come back 
• Kills the roots of (both) broad leaf and grassy weeds; 
• Kills the weed you see and the root you don't 
• Kills (to) the root(s)! (Guaranteed! *) 
• Kills unwanted weeds and grasses, roots and all 
• Kills weeds in flowerbeds, around trees, shrubs and fences, and on patios, paths, sidewalks, sidewalk 
cracks, walkways, driveways, and other areas in your yard. 
• Kills weeds, roots and all 
• Lawns and gardens can be reseeded or planted soon after treatment 
• Make only what you need 
• Money back guarantee. See back panel for details*. 
• Multipurpose grass and broadleaf weed control 
• No odor 
• No root. No weed: No problem. 
• NOW!

Page 142 of 143 
 
• Once it enters the plant, it won't wash off 
• Ornamental gardens can be reseeded or planted 1 day after treatment. 
• Questions or Comments? Call (Tel. No.) 
• Results in 24 hours [Optional - clock graphic] 
• (Insert Brand name) kills the weed you see and the root others leave behind 
• (Insert Brand name) kills weeds and grasses in - Patios - Driveways - Sidewalks - Gardens 
• Satisfaction guaranteed * or we will gladly refund purchase price 
• Satisfaction guaranteed * or your money back with proof of purchase 
• Speeds absorption to the root for complete kill 
• Spray weeds (Use) in flowerbeds, around trees, shrubs and around fences, and on patios, paths, 
sidewalks, sidewalk cracks, walkways, driveways, and other areas in your yard 
• Starts working immediately 
• Trusted Results for Guaranteed Satisfaction * (Open booklet for Details) 
• Use around fruits and vegetables. 
• (Use) For Bamboo Control 
• (Use) For Brush Control 
• (Use) For General Weed Control: Use along fences, paths, patios, sidewalks and driveways, around 
trees, shrubs, ornamental plantings, flowerbeds, and buildings, and in brick and gravel walkways. Use to 
trim and edge landscape areas 
• (Use) For Landscaping: Use to prepare areas for planting of Ornamentals, trees, shrubs, desert 
landscapes, rock gardens, flowerbeds or similar plantings 
• Use for large jobs like garden plot preparation and lawn replacement (renovation) 
• (Use) For Lawn Renovation 
• (Use) For Spot Spraying: Use in and around flowerbeds, ornamental, fruit and nut trees, grapevines, 
shrubs, fences, driveways and walkways 
• (Use) For Stumps 
• (Use) For Wildlife Areas: Use to prepare areas for planting wildlife food. Exotic or undesirable plants can 
be controlled to allow for planting or recovery of native plant species. Spot treatments can be made to 
selectively remove unwanted plants. 
• (Use in) Apply with a Big ShotTM Multi-Purpose Sprayer or other tank sprayer, Ortho Dial 'n Spray® or 
other hose-end sprayer, or a (hand held) trigger sprayer 
• Use to prepare sites: for large plantings, for planting flowerbeds, fruit trees, Ornamentals, vegetables 
and gardens, and for renovating lawns 
• Use to refill (insert Brand name) Ready-To-Use containers 
• Visible effects are gradual wilting and yellowing advancing to complete browning and root destruction. 
• Visible results in 2 to 4 days (hours) [Optional - clock graphic] 
• (Weeds) start dying in 1 day (24 hours) [Optional - clock graphic] 
• What to Know 
• Where it Works 
• [Optional] With convenient measuring cup 
• Won't wash away (off) 
• Works first time, every time - guaranteed 
• Works only when absorbed by the foliage

Page 143 of 143 
 
 
 
[Promotional options] 
• Free [ ] with this purchase of this product 
• [X] % Free (More) 
• FREE SAMPLE 
• SAMPLE NOT FOR SALE 
• Save up to six on (your) next purchase