crop-chem-docs/corpus/epa_ppls/264-858.md

# PROVADO PRO INSECTICIDE

- EPA Reg No: **264-858**
- Registrant: BAYER CROPSCIENCE, LLC
- Signal word: Caution
- Active ingredients: Imidacloprid (16.5%)
- Label accepted: 2013-12-16
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000264-00858-20131216.pdf

---
f
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY
WASHINGTON, D.C. 20460-0001
16 2013
OFFICE OF CHEMICAL SAFETY
AND POLLUTION PREVENTION
Clive A. Haider
Bayer CropScience LP
P.O. Box 12014, 2 T.W. Alexander Drive
Research Triangle Park, NC 27709
Subject: Amendment to add pollinator text per Agency letter dated 08/15/13
EPA Registration No.: 264-858
Primary Brand Name: PROVADD PRO Insecticide
Submission Date: November 25, 2013
Dear Mr. Haider:
The labeling referred to above, submitted in connection with registration under the Federal Insecticide,
Fungicide, and Rodenticide Act is acceptable. A stamped copy of your labeling is enclosed for your records. This
labeling supersedes all previously accepted labeling. You must submit one (1) copy of the final printed labeling
before you release the product for shipment with the new labeling. See 40 CFR 156.10(a)(6).
Under 40 CFR 152.130(d), EPA may establish dates by which all product distributed or sold by the registrant
must bear revised labeling. The following paragraphs set forth the schedule for ensuring that that your product
bears revised labeling within a reasonable time period.
• Any product released for shipment after 2/28/14 must bear the new label.
If these conditions are not complied with, EPA will take appropriate action against this registration. If you have
any questions, please contact Gene Benbow at (703) 347-0235 or via email at benbow.gene(g),epa.gov.
Sincerely,
Venus Eagle
Product Manager (01)
Insecticide-Rodenticide Branch
Registration Division (7504P)

DEC ^ 6 2013
hinder the Federal f.nsecucit*,
-"- -W GROUP HI INSECTICIDE
PROVADO PRO Insecticide
For control of certain insects infesting various crops.
ACTIVE INGREDIENT:
Imidacloprid, 1-[(6-Chloro-3-pyridinyl)methyl]-/V-nitro-2-imidazolidinimine
INERT INGREDIENTS:
..16.5%
..83.5%
100.0%
EPA Reg. No. 264-858 EPA Est. No.
Contains 1.6 pounds of active ingredient per gallon. SHAKE WELL BEFORE USING
STOP - Read the label before use
Keep out of reach of children
CAUTIONFor MEDICAL And TRANSPORTATION Emergencies ONLY Call 24 Hours A Day 1-800-334-7577
For PRODUCT USE Information Call 1-866-99BAYER (1-866-992-2937)
FIRST AID
IF ON SKIN OR
CLOTHING:
IF INHALED:
IF SWALLOWED:
• Take off contaminated clothing.
• Rinse skin immediately with plenty of water for 15 to 20 minutes.
• Call a poison control center or doctor for treatment advice.
• Move person to fresh air.
• If person is not breathing, call 91 1 or an ambulance, then give artificial respiration, preferably mouth-
to-mouth if possible.
• Call a poison control center or doctor for further treatment advice.
• Call a poison control center or doctor immediately for treatment advice.
Have person sip a glass of water if able to swallow.
Do not induce vomiting unless told to do so by a poison control center or doctor.
Do not give anything by mouth to an unconscious person.
In case of emergency call toll free the Bayer CropScience Emergency Response Telephone No. 1-800-334-7577.
Have a product container or label with you when calling a poison control center or doctor, or going for treatment.
Note To Physician: No specific antidote is available. Treat the patient symptomatically.
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION
Harmful if absorbed through skin, inhaled or if swallowed. Avoid contact with skin, eyes, or clothing. Avoid breathing spray mist. Wear
long-sleeved shirt and long pants, socks, shoes and chemical-resistant gloves (such as Natural Rubber, Section Category A).
Applicators and other handlers must wear:
Long-sleeved shirt and long pants
Chemical-resistant gloves made of any waterproof material such as, barrier laminate, butyl rubber, nitrile rubber, neoprene rubber,
natural rubber, polyethylene, polyvinylchloride (PVC) or viton.
Shoes plus socks
Follow manufacturer's instructions for cleaning/ maintaining personal protective equipment, PPE. If no such instructions for washables,
use detergent and hot water. Keep and wash PPE separately from other laundry.

r f
Engineering controls statements:
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker Protection
Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-6)], the handler PPE requirements may be reduced or modified as
specified in the WPS.
User Safety Recommendations
User should:
Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, or using tobacco.
Remove and wash contaminated clothing before reuse
ENVIRONMENTAL HAZARDS
Do not apply directly to water, areas where surface water is present or to intertidal areas below the mean high water mark. Do not
contaminate water when disposing of equipment washwaters.
This product is highly toxic to bees exposed to direct treatment or residues on blooming crops or weeds. Do not apply this product or
allow it to drift to blooming crops or weeds if bees are foraging in the treatment area. This product is toxic to wildlife and highly toxic to
aquatic invertebrates.
This chemical demonstrates the properties and characteristics associated with chemicals detected in ground water. The use of this
chemical in areas where soils are permeable, particularly where the water table is shallow, may result in groundwater contamination.

f
PROTECTION OF POLLINATORS
APPLICATION RESTRICTIONS EXIST FOR THIS PRODUCT
BECAUSE OF RISK TO BEES AND OTHER INSECT POLLINATORS. FOLLOW APPLICATION RESTRICTIONS
FOUND IN THE DIRECTIONS FOR USE TO PROTECT POLLINATORS.
Look for the bee hazard icon "SX in the Directions for Use for each application site for specific use restrictions and
instructions to protect bees and other insect pollinators.
This product can kill bees and other insect pollinators.
Bees and other insect pollinators will forage on plants when they flower, shed pollen, or produce nectar.
Bees and other insect pollinators can be exposed to this pesticide from:
o Direct contact during foliar applications, or contact with residues on plant surfaces after foliar applications
o Ingestion of residues in nectar and pollen when the pesticide is applied as a seed treatment, soil, tree injection, as
well as foliar applications.
When Using This Product Take Steps To:
o Minimize exposure of this product to bees and other insect pollinators when they are foraging on pollinator
attractive plants around the application site,
o Minimize drift of this product on to beehives or to off-site pollinator attractive habitat. Drift of this product onto
beehives or off-site to pollinator attractive habitat can result in bee kills.
Information on protecting bees and other insect pollinators may be found at the Pesticide Environmental Stewardship
website at: http://pesticidestewardship.org/PollinatorProtection/Pages/default.aspx.
Pesticide incidents (for example, bee kills) should immediately be reported to the state/tribal lead agency. For contact
information for your state, go to: www.aapco.org/officials.html. Pesticide incidents should also be reported to the National
Pesticide Information Center at: www.npic.orst.edu or directly to EPA at: beekill@epa.gov

r
OBSERVE THE FOLLOWING PRECAUTIONS WHEN MIXING AND APPLYING IN THE VICINITY OF AQUATIC AREAS SUCH AS
LAKES; RESERVOIRS; RIVERS; PERMANENT STREAMS, MARSHES OR NATURAL PONDS; ESTUARIES AND COMMERCIAL
FISH FARM PONDS.
Spray Drift Management
The interaction of many equipment and weather related factors determine the potential for spray drift. The applicator is responsible for
considering all of these factors when making application decisions. Avoiding spray drift is the responsibility of the applicator.
Mixing and Loading Requirements
To avoid potential contamination of groundwater, the use of a properly designed and maintained containment pad for mixing and
loading of any pesticide into application equipment is recommended. If containment pad is not used, maintain a minimum distance of
25 feet between mixing and loading area and potential surface to groundwater conduits such as field sumps, uncased well heads, sink-
holes, or field drains.
For Aerial Applications
The spray boom should be mounted on the aircraft so as to minimize drift caused by wing tip vortices. The minimum practical boom
length should be used, and must not exceed 75% of the wing span or rotor diameter.
Importance of Droplet Size
An important factor influencing drift is droplet size. Small droplets (<150 - 200 microns) drift to a greater extent than large droplets.
Within typical equipment specifications, applications should be made to deliver the largest droplet spectrum that provides sufficient
control and coverage. Formation of very small droplets may be minimized by appropriate nozzle selection, by orienting nozzles away
from the air stream as much as possible and by avoiding excessive spray boom pressure.
Spray should be released at the lowest possible height consistent with good pest control and flight safety. Applications more than 10
feet above the crop canopy should be avoided.
Wind Speed Restrictions
Drift potential increases at wind speeds of less than 3 mph (due to inversion potential) or more than 10 mph. However, many factors,
including droplet size, canopy and equipment specifications determine drift potential at any given wind speed. Do not apply when winds
are greater than 15 mph and avoid gusty and windless conditions. Risk of exposure to sensitive aquatic areas can be reduced by
avoiding applications when wind direction is toward the aquatic area.
Restrictions During Temperature Inversions
Do not make aerial or ground applications during temperature inversions. Drift potential is high during temperature inversions.
Temperature inversions restrict vertical air mixing, which causes small suspended droplets to remain close to the ground and move
laterally in a concentrated cloud. Temperature inversions are characterized by increasing temperature with altitude and are common on
nights with limited cloud cover and light to no wind. They begin to form as the sun sets and often continue into the morning. Their
presence can be indicated by ground fog; however if fog is not present, inversions can also be identified by the movement of smoke
from a ground source. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an
inversion, while smoke that moves upward and rapidly dissipates indicates good vertical mixing.
Airblast (Air Assist) Specific Recommendations for Tree Crops and Vineyards
Airblast sprayers carry droplets into the canopy of trees/vines via a radially, or laterally directed air stream. The following specific drift
management practices should be followed:
•Adjust deflectors and aiming devices so that spray is only directed into the canopy;
•Block off upward pointed nozzles when there is no overhanging canopy;
• Use only enough air volume to penetrate the canopy and provide good coverage;
• Do not allow the spray to go beyond the edge of the cultivated area (i.e., turn off sprayer when turning at end rows);
•Only spray inward, toward the orchard or vineyard, for applications to the outside rows.
No-Spray Zone Requirements for Foliar Applications
Do not apply by ground within 25 feet, or by air within 150 feet of lakes; reservoirs; rivers; permanent streams, marshes or natural
ponds; estuaries and commercial fish farm ponds.
Runoff Management
Do not cultivate within 10 feet of the aquatic areas to allow growth of a vegetative filter strip. When used on erodible soils, Best
Management Practices for minimizing runoff should be employed. Consult your local Natural Resources Conservation Service for
recommendations in your use area.
Endangered Species Notice
Under the Endangered Species Act, it is a Federal Offense to use any pesticide in a manner that results in the death of a member of an
endangered species. Consult your local county bulletin, County Extension Agent, or Pesticide State Lead Agency for information
concerning endangered species in your area.

Resistance Management :
Some insects are known to develop resistance to insecticides after repeated use. As with any insecticide, the use of this product
should conform to resistance management strategies established for the use area.
PROVADO® PRO Insecticide contains a Group 4A insecticide. Insect biotypes with acquired or inherent tolerance to Group 4A
insecticides may eventually dominate the insect population if Group 4A insecticides are used repeatedly as the predominant method of
control for targeted species.
The active ingredient in PROVADO PRO is a member of the neonicotinoid chemical class. Avoid using a block of more than three
consecutive applications of PROVADO PRO and/or other Group 4A products having the same or similar mode of action. Following a
neonicotinoid block of treatments, Bayer CropScience strongly encourages the rotation to a block of applications with effective products
of a different mode of action before using additional applications of neonicotinoid products. Using a block rotation or windowed
approach, along with other IPM practices, is considered an effective use strategy for preventing or delaying an insect pest's ability to
develop resistance to this class of chemistry.
Foliar applications of PROVADO PRO or other Group 4A products from the neonicotinoid chemical class should not be used on crops
previously treated with a long-residual, soil-applied product from the neonicotinoid chemical class.
Other Group 4A neonicotinoid products used as foliar treatments include: Actara, Assail, CALYPSO, Centric, Clutch, Couraze, Gallant,
Impulse, Intruder, LEVERAGE, Nuprid, Pasada, TRIMAX PRO and Venom.
Other Group 4A neonicotinoid products used as soil/seed treatment include: ADMIRE PRO, Advise, Alias, Belay, Couraze, Cruiser,
GAUCHO, Macho, Macho Max, Nuprid, Platinum, Venom and Widow.
Contact your local extension specialist, certified crop advisor and/or product manufacturer for.additional insect resistance management
recommendations. Also, for more information on Insect Resistance Management (IRM), visit the Insecticide Resistance Action
Committee (IRAC) on the web at http://irac-online.org,
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
See individual crops for specific pollinator protection application restrictions. If none exist under
the specific crop, for foliar applications, follow these application directions for crops that are
contracted to have pollinator services or for food/feed & commercially grown ornamentals that are
attractive to pollinators:
FOR CROPS UNDER CONTRACTED POLLINATION SERVICES
Do not apply this product while bees are foraging. Do not apply this product until flowering is complete and all petals
have fallen unless the following condition has been met.
If an application must be made when managed bees are at the treatment site, the beekeeper providing the pollination
services must be notified no less than 48-hours prior to the time of the planned application so that the bees can be
removed, covered or otherwise protected prior to spraying.
FOR FOOD CROPS AND COMMERCIALLY GROWN ORNAMENTALS NOT UNDER CONTRACT
FOR POLLINATION SERVICES BUT ARE ATTRACTIVE TO POLLINATORS
Do not apply this product while bees are foraging. Do not apply this product until flowering is complete and all petals
have fallen unless one of the following conditions is met:
• The application is made to the target site after sunset
« The application is made to the target site when temperatures are below 55°F
« The application is made in accordance with a government-initiated public health response
• The application is made in accordance with an active state-administered apiary registry program where
beekeepers are notified no less than 48-hours prior to the time of the planned application so that the
bees can be removed, covered or otherwise protected prior to spraying
• The application is made due to an imminent threat of significant crop loss, and a documented
determination consistent with an IPM plan or predetermined economic threshold is met. Every effort
should be made to notify beekeepers no less than 48-hours prior to the time of the planned application
so that the bees can be removed, covered or otherwise protected prior to spraying.

r
Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers
may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide
regulation.
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This Standard
contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of
agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains
specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and restricted-
entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard.
Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours.
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with
anything that has been treated, such as plants, soil, 'or water, is:
Long-sleeved shirt and long pants
Chemical-resistant gloves made of any waterproof material such as, barrier laminate, butyl rubber, nitrile rubber, neoprene rubber,
natural rubber, polyethylene, polyvinylchloride (PVC) or viton.
• Shoes plus socks _
STORAGE AND DISPOSAL
Do not contaminate water, food, or feed by storage or disposal.
Pesticide Storage: Store in a cool, dry place and in such a manner as to prevent cross contamination with other pesticides, fertilizers,
food, and feed. Store in original container and out of the reach of children, preferably in a locked storage area. Handle and open
container in a manner as to prevent spillage. If the container is leaking, invert to prevent leakage. If container is leaking or material
spilled for any reason or cause, carefully dam up spilled material to prevent runoff. Refer to Precautionary Statements on label for
hazards associated with the handling of this material. Do not walk through spilled material. Absorb spilled material with absorbing type
compounds and dispose of as directed for pesticides below. In spill or leak incidents, keep unauthorized people away. You may
contact the Bayer CropScience Emergency Response Team for decontamination procedures or any other assistance that may be
necessary. The Bayer CropScience Emergency Response telephone number is 1-800-334-7577.
Pesticide Disposal: Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility.
Container Disposal: Non-refillable container. Do not reuse or refill this container. Triple rinse container (or equivalent) promptly after
emptying.
Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow
begins to drip. Fill the container % full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix
tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times.
Offer for recycling, if available or reconditioning, or puncture and dispose of in a sanitary landfill or by incineration, or, if allowed by
Jatate and local authorities, by burning. If burned, stay out of smoke. _
APPLICATION DIRECTIONS
Do Not Apply PROVADO PRO In Enclosed Structures Such As Greenhouses Or Planthouses.
PROVADO PRO should be applied as a directed or broadcast foliar spray. Thorough coverage of foliage is necessary without runoff for
optimum insecticidal efficacy. Use adequate spray volumes, properly calibrated application equipment and spray adjuvant if necessary
to obtain thorough coverage. Failure to provide adequate coverage and retention of PROVADO PRO on leaves and fruit may result in
loss of insect control or delay in onset of activity. Except where otherwise specified, PROVADO PRO may be applied with properly
calibrated ground or aerial application equipment. Use minimum spray volumes unless otherwise specified in the crop specific
directions for use. Application sections are 10 gallons/Acre by ground application and 5 gallons/Acre through aerial equipment.
PROVADO PRO may also be applied by overhead chemigation (see additional CHEMIGATION DIRECTIONS FOR USE section
below) if allowed in crop specific application section.
PROVADO PRO use on crops grown for production of true seed intended for private or commercial planting is not permitted but may be
allowed under state-specific 24(c) labeling. As with any insecticide, care should be taken to minimize exposure of PROVADO PRO to
honey bees and other pollinators. Additional information on PROVADO PRO uses for these crops and other questions may be obtained
from the Cooperative Extension Service, PCAs, consultants or local Bayer CropScience representatives.
Do not apply more than 0.5 Ib active ingredient per acre, per crop year, regardless of formulation or method of application, unless
specified within a crop-specific application section for a given crop.
Additional product use information may be obtained by calling 1-866-99BAYER (1-866-992-2937).

c c
MIXING INSTRUCTIONS
To prepare the application mixture, add a portion of the required amount of water to the tank and with agitation add PROVADO PRO.
Complete filling tank with balance of water needed. Maintain sufficient agitation during both mixing and application. PROVADO PRO
may also be used with other pesticides and/or fertilizer solutions. Please see Compatibility Note below. When tank mixtures of
PROVADO PRO and other pesticides are involved, prepare the tank mixture as specified above and follow suggested Mixing Order
below.
Mixing Order
When pesticide mixtures are needed, add wettable powders or wettable granules first, PROVADO PRO and other flowable (suspension
concentrate) products second, and emulsifiable concentrates last. Ensure good agitation as each component is added. Do not add an
additional component until the previous is thoroughly mixed. If a fertilizer solution is added, a fertilizer/pesticide compatibility agent may
be needed. Maintain constant agitation during both mixing and application to ensure uniformity of spray mixture.
Compatibility Note
Test compatibility of the intended mixture before adding PROVADO PRO to the spray or mix tank. Add proportionate amounts of each
ingredient in the appropriate order, to a pint or quart jar, cap, shake for 5 minutes, and let set for 5 minutes. Poor mixing or formation of
precipitates that do not readily redisperse indicates an incompatible mixture that should not be used. For further information, contact
your local Bayer CropScience representative.
CHEMIGATION DIRECTIONS FOR USE
Refer to DIRECTIONS FOR USE section before proceeding with chemigation application.
Types of Irrigation Systems
Chemigation applications of PROVADO PRO may be made to crops through overhead sprinkler chemigation systems if specified in
crop-specific application sections. Do not apply PROVADO PRO through any other type of irrigation system.
Water Volume
PROVADO PRO chemigation applications should be made as concentrated as possible. Retention of PROVADO PRO on target site of
insect infestation is necessary for optimum activity. Chemigation of PROVADO PRO in water volumes exceeding 0.1 inch/Acre is not
recommended.
Uniform Water Distribution and System Calibration
The irrigation system must provide uniform distribution of treated water. Crop injury, lack of effectiveness, or illegal pesticide residues
in the crop can result from non-uniform distribution of treated water. The system must be calibrated to uniformly apply the rates
specified. If you have questions about calibration, you should contact State Extension Service specialists, equipment manufacturers or
other experts.
Chemigation Monitoring
A person knowledgeable of the chemigation system and responsible for its operation, or under the supervision of the responsible
person, shall shut the system down and make necessary adjustments should the need arise.
Drift
Do not apply when wind speed favors drift beyond the area intended for treatment.
Required System Safety Devices
The system must contain a functional check valve, vacuum relief valve, and low-pressure drain appropriately located on the irrigation
pipeline to prevent water source contamination from backflow. The pesticide injection pipeline must contain a functional, automatic,
quick-closing check valve to prevent the flow of fluid back toward the injection pump. The pesticide injection pipeline must also contain
a functional, normally closed, solenoid-operated valve located on the intake side of the injection pump and connected to the system
interlock to prevent fluid from being withdrawn from the supply tank when the irrigation system is either automatically or manually shut
down. The system must contain functional interlocking controls to automatically shut off the pesticide injection pump when the water
pump motor stops. The irrigation line or water pump must include a functional pressure switch which will stop the water pump motor
when the water pressure decreases to the point where pesticide distribution is adversely affected. Systems must use a metering pump,
such as a positive displacement injection pump (e.g., diaphragm pump) effectively designed and constructed of materials that are
compatible with pesticides and capable of being fitted with a system interlock.
Using Water from Public Water Systems
Public water system means a system for the provision to the public of piped water for human consumption if such system has at least
15 service connections or regularly serves an average of at least 25 individuals daily at least 60 days out of the year. Chemigation
systems connected to public water systems must contain a functional, reduced-pressure zone, back flow preventer (RPZ) or the
functional equivalent in the water supply line upstream from the point of pesticide introduction. As an option to the RPZ, the water from
the public water system should be discharged into a reservoir tank prior to pesticide introduction. There shall be a complete physical
break (air gap) between the outlet end of the fill pipe and to top or overflow rim of the reservoir tank of at least twice the inside diameter
of the fill pipe. The pesticide injection pipeline must contain a functional automatic quick-closing check valve to prevent the flow of fluid
back toward the injection. The pesticide injection pipeline must contain a functional normally closed solenoid-operated valve located on
the intake side of the injection pump and connected to the system interlock to prevent fluid from being withdrawn from the supply tank
when the irrigation system is either automatically or manually shut down. The system must contain functional interlocking controls to
automatically shut off the pesticide injection pump when the water pump motor stops or in cases where there is no water pump, when
the water pressure decreases to the point where pesticide distribution is adversely affected. Systems must use a metering pump such

r
as a positive displacement injection pump (e.g. Diaphragm pump) effectively designed and constructed of materials that are compatible
with pesticides and capable of being fitted with a system interlock.
ROTATIONAL CROPS*
Treated areas may be replanted with any crop specified on an imidacloprid label, or any crop for which a tolerance
active ingredient, as soon as practical following the last application. For crops not listed on an imidacloprid label, or
which no tolerances for the active ingredient have been established, a 12-month plant-back interval must be observed.
exists for the
for crops for
Immediate Plant-back
All crops on this label plus the following crops not on this label: barley, bulb vegetables (crops of crop group 03-07), canola, corn
(field, sweet and pop), rapeseed, sorghum, soybean, sugarbeet, and wheat.
30-Day Plant-back
Cereals (including buckwheat, millet, oats, rice, rye, and triticale), safflower
12-Month Plant-back
All other crops
"Cover crops for soil building or erosion control may be planted any time, but do not graze or harvest for food or feed.

r r
FIELD CROPS
Applications - PROVADO® PRO Insecticide
Apply specified rate per acre as a broadcast or directed foliar spray to infested area as pest populations begin to build. Thorough
uniform coverage is necessary to achieve optimum control. A spray adjuvant may be used to improve coverage. PROVADO PRO
may not knockdown established and heavy insect populations. Two applications may be required to achieve control. Scout fields
and retreat if needed. PROVADO PRO may be tank mixed with other insecticides as specified for knockdown of pests or for
improved control of other pests.
COTTON
Pests Controlled
Cotton aphid
Cotton fleahopper
Bandedwinged whitefly
Plant bugs (excludes Lygus hesperus)
Green stink bug
Southern green stink bug
Bollworm/Budworm (ovicidal effect)-
Rate
fluid ounces/Acre
2.5-5.0
Pests Suppressed
Lygus bug (Lygus hesperus)
Whiteflies (other than bandedwinged whitefly) 3.8-5.0
Restrictions
Pre-Harvest Interval (PHI): 14 days
Minimum interval between applications: 7 days
Maximum PROVADO PRO allowed per year: 25.0 fluid ounces/Acre (0.31 Ib AI/A)
Do not graze treated fields after any application of PROVADO PRO
PROVADO PRO may be applied through properly calibrated ground, aerial or chemigation application equipment.
Tank Mix Specifications
Pests Controlled
(in addition to pests listed above)
For early season control of: . ,
Thrips
For mid to late season control of:
Plant bugs
Stink bugs (including Brown stink bug)
Grasshoppers
Saltmarsh caterpillar
Cotton leafperforator
PROVADO PRO Bidrin® 8*
Rate Rate
fluid ounces/Acre fluid ounces/Acre
2.5-3.8 1.6-3.2
2.5-3.8 4.0-8.0
Restrictions (in addition to Restrictions listed above):
* Refer to the BidrinD 8 product label for specific use rates; observe all restrictions and precautions that appear on the label.

PEANUT V
Pests Controlled Rate
fluid ounces/Acre
Aphids
Leafhoppers
Whiteflies
3.5
Restrictions
Pre-Harvest Interval (PHI): 14 days
Minimum interval between applications: 5 days
Maximum PROVADO PRO allowed per year: 10.5 fluid ounces/Acre (0.13 Ib AI/Acre)
" Use not permitted in California unless otherwise directed by state-specific 24(c) labeling.
POTATO
Pests Controlled Rate
fluid ounces/Acre
Aphids
Colorado potato beetle
Flea beetles
Leafhoppers
Psyllids
3.8
Restrictions
Pre-Harvest Interval (PHI): 7 days
Minimum interval between applications: 7 days
Maximum PROVADO PRO allowed per year: 16.0 fluid ounces/Acre (0.2 Ib AI/A)
TOBACCO
Pests Controlled
Aphids
Flea beetles
Japanese beetle
Rate
fluid ounces/Acre
2.0-4.0
4.0
Restrictions
Pre-Harvest Interval (PHI): 14 days
Minimum interval between applications: 7 days
Maximum PROVADO PRO allowed per year: 22.4 fluid ounces/Acre (0.28 Ib AI/A)
10

VEGETABLE and SMALL FRUIT CROPS
Applications - PROVADO®PRO Insecticide
Apply specified rate per acre as a broadcast or directed foliar spray to infested area as pest populations begin to build. Thorough
uniform coverage is necessary to achieve optimum control. A spray adjuvant may be used to improve coverage. PROVADO PRO
may not knockdown established and heavy insect populations. Two applications may be required to achieve control. Scout fields
and retreat if needed. PROVADO PRO may be tank mixed with other insecticides as specified for knockdown of pests or for
improved control of other pests.
FRUITING VEGETABLES^'
Crops of Crop Group 8 plus Okra Including: Eggplant, Ground cherry, Okra, Pepinos, Pepper (including bell, chili, cooking, pimento
and sweet), Tomatillo, Tomato
Pests Controlled
Aphids
Colorado potato beetle
Leafhoppers
Whiteflies
Pepper weevil
Rate
fluid ounces/Acre
3.8-6.2
6.2
Restrictions
Pre-Harvest Interval (PHI): 0 day
Minimum interval between applications: 5 days
Maximum PROVADO PRO allowed per crop season: 19.2 fluid ounces/Acre (0.24 Ib AI/A)
Applications
For pepper weevil, apply specified dosage of PROVADO PRO by ground equipment only, timing applications prior to a damaging
population becoming established. Good coverage of foliage and fruit is necessary for optimum control. Applications of PROVADO
PRO must be incorporated into a full-season program, where alternations of effective products from multiple classes of chemistry and
different modes of action are utilized in a blocked or windowed approach.
When targeting adult whiteflies, use higher rate within the specified rate range.
For additional information, please contact your Bayer representative, Extension Specialist or crop advisor.
1/ Not for use on crops grown for seed unless allowed by state-specific 24(c) labeling. •
GLOBE ARTICHOKE
Pests Controlled
Aphids
Leafhoppers
Rate
fluid ounces/Acre
4.0-10.0
Restrictions
Pre-Harvest Interval (PHI): 7 days
Minimum interval between applications: 14 days
Maximum PROVADO PRO allowed per year: 40.0 fluid ounces/Acre (0.5 Ib AI/A)
11

r
HERBS i'
Crops of Crop Subgroup 19A including: Angelica, Balm (lemon balm), Basil (fresh and dried), Borage, Bumet, Camomile, Catnip,
Chervil (dried), Chinese chive, Chive, Clary, Coriander (cilantro or Chinese parsley leaves), Costmary, Culantro (leaf), Curry (leaf),
Dillweed, Horehound, Hyssop, Lavender, Lemongrass, Lovage (leaf), Marigold, Marjoram, Nasturtium, Parsley (dried), Pennyroyal,
Rosemary, Rue, Sage, Savory (summer and winter), Sweet bay (bay leaf), Tansy, Tarragon, Thyme, Wintergreen, Woodruff,
Wormwood.
Pests Controlled
Aphids
Flea beetles
Leafhoppers
Whiteflies
Rate
fluid ounces/Acre
3.5
Restrictions
Pre-Harvest Interval (PHI): 7 days
Minimum interval between applications: 5 days
Maximum PROVADO PRO allowed per crop season: 10.5 fluid ounces/Acre (0.13 Ib AI/Acre)
Applications
PROVADO PRO may be applied through properly calibrated ground and aerial application equipment. Thorough coverage with direct
contact of the spray material to the target pests is required for optimum control. The addition of an organosilicone-based spray
adjuvant at a rate not to exceed the adjuvant manufacturer's specified use rate may improve coverage and control.
Note
Not all crops and/or varieties listed above have been tested for phytotoxic effects. Without specific knowledge about a particular crop
and variety, Bayer CropScience strongly recommends that only small areas or numbers of plants of each be treated and evaluated
prior to commercial use.
1/ Use not permitted in California unless otherwise directed by state-specific 24(c) labeling.
BRASSICA (COLE) LEAFY VEGETABLES 1'
Crops of Crop Group 5 Including: Broccoli, Broccoli raab (rapini), Brussels sprouts, Cabbage, Cauliflower, Cavalo broccoli, Chinese
(gai Ion) broccoli, Chinese (bok choy) cabbage, Chinese (napa) cabbage, Chinese mustard (gai choy) cabbage, Collards, Kale,
Kohlrabi, Mizuna, Mustard greens, Mustard spinach, Rape greens
Doffa
Pests Controlled fluid ounces/Acre
Aphids
Flea beetles 3.8
Leafhoppers
Whiteflies
Restrictions
Pre-Harvest Interval (PHI): 7 days
Minimum interval between applications: 5 days
Maximum PROVADO PRO allowed per crop season: 19.0 fluid ounces/Acre (0.24 Ib AI/A)
1/ Not for use on crops grown for seed unless allowed by state-specific 24(c) labeling.
12

c r
LEAFY GREENS VEGETABLES i'
Crops of Crop Subgroup 4A Plus Watercress Including: Amaranth (leafy amaranth, Chinese spinach, tampala), Arugula (Roquette);
Chervil, Chrysanthemum (edible leaved and garland), Corn salad, Cress (garden), Cress (upland, yellow rocket, winter cress)),
Dandelion, Dock (sorrel), Endive (escarole), Lettuce (head and leaf), Orach, Parsley, Purslane (garden and winter), Radicchio (red
chicory), Spinach (including New Zealand and vine (Malabar spinach, Indian spinach)), Watercress (commercial production, only.
Applications must not be made to native cress growing in streams or other bodies of water), Watercress (upland)
Pests Controlled
Aphids
Flea beetles
Leafhoppers
Whiteflies
Rate
fluid ounces/Acre
3.8
Restrictions
Pre-Harvest Interval (PHI): 7 days
Minimum interval between applications: 5 days
Maximum PROVADO PRO allowed per crop season: 19.0 fluid ounces/Acre (0.24 Ib AI/A)
Applications
For applications made to watercress, production fields must be drained of water at least 24 hours prior to application and water must
not be reapplied to the field for a minimum of 24 hours following the application. Applications must be made to fully leafed-up
canopies only.
1/ Not for use on crops grown for seed unless allowed by state-specific 24(c) labeling.
LEGUME VEGETABLES *
Crops of Crop Group 6 (except soybean, dry) Including:
Edible Podded and Succulent Shelled Pea and Bean and Dried Shelled Pea and Bean
Bean (Lupinus spp., including grain lupin, sweet lupin, white lupin, and white sweet lupin)
Bean (Phaseo/us spp., including field bean, kidney bean, lima bean, navy bean, pinto bean, runner bean, snap bean, tepary bean, wax
bean)
Bean (Vigna spp., including adzuki bean, asparagus bean, blackeyed pea, catjang, Chinese longbean, cowpea, Crowderpea, moth
bean, mung bean, rice bean, Southern pea, urd bean, yardlong bean)
Pea (Pisum spp., including dwarf pea, edible-pod pea, English pea, field pea, garden pea, green pea, snow pea, sugar snap pea)
Other Beans and Peas (Broad bean (fava), Chickpea (garbanzo bean), Guar, Jackbean, Lablab bean (hyacinth bean), Lentil, Pigeon
pea, Soybean (immature seed), Sword bean)
Pests Controlled Rate
fluid ounces/Acre
Aphids
Leafhoppers
Whiteflies
3.5
Restrictions
Pre-Harvest Interval (PHI): 7 days
Minimum interval between applications: 7 days
Maximum PROVADO PRO allowed per crop season: 10.5 fluid ounces/Acre (0.13 Ib AI/A)
1/ Not for use on crops grown for seed unless allowed by state-specific 24(c) labeling.
13

ROOT, TUBEROUS and CORM VEGETABLES *'
Crops of Crop Group 1C (except sugarbeet) plus Kava Including: Arracacha, Arrowroot, Artichoke (Chinese and Jerusalem), Beet
(garden)2', Burdock (edible)2', Canna (edible, Queensland arrowroot), Carrot2', Cassava (bitter & sweet)2', Celeriac2', Chayote (root),
Chervil (turnip-rooted)2', Chicory2', Chufa, Dasheen (taro)2', Ginger, Ginseng, Horseradish, Kava2''2', Leren, Parsley (turnip-rooted),
Parsnip2', Radish2', Oriental radish (diakon)2', Rutabaga2', Salsify (black)2', Salsify (oyster plant), Salsify (Spanish), Skirret,
Sweetpotato2, Tanier (cocoyam)2', Tumeric, Turnip2',Yam bean (jicama, manoic pea), Yam (
(For applications on Potato see Field Crops section)
Pests Controlled
Aphids
Flea beetles
Leafhoppers
Whiteflies
Rate
fluid ounces/Acre
3.5
Restrictions
Pre-Harvest Interval (PHI): 7 days
Minimum interval between applications: 5 days
Maximum PROVADO PRO allowed per crop season: 3.5 fluid ounces/Acre (0.044 Ib AI/A) on Radish; 10.5 fluid ounces/Acre
(0.13 Ib AI/A) on other crops.
Maximum PROVADO PRO applications per crop season: 1 on Radish; 3 on other crops.
!' Not for use on crops grown for seed unless allowed by state-specific 24(c) labeling.
2/ Tops or greens from these crops may be utilized for food or feed.
y Use not permitted in California unless otherwise directed by state-specific 24(c) Labeling.
STRAWBERRY
Rate
Pests Controlled fluid ounces/Acre
Aphids
Spittlebugs
Whiteflies
3.8
Restrictions
Pre-Harvest Interval (PHI): 7 days
Minimum interval between applications: 5 days
Maximum PROVADO PRO allowed per crop season: 11.4 fluid ounces/Acre (0.14 Ib AI/A)
Do not apply during bloom or within 10 days prior to bloom or when bees are foraging.
14

TREE, BUSH and VINE CROPS
Applications - PROVADO®PRO Insecticide
Apply specified rate per acre as a broadcast or directed foliar spray to infested area as pest populations begin to build. Thorough
uniform coverage is necessary to achieve optimum control. A spray adjuvant may be used to improve coverage. PROVADO PRO
may not knockdown established and heavy insect populations. Two applications may be required to achieve control. Scout fields
and retreat if needed. PROVADO PRO may be tank mixed with other insecticides as specified for knockdown of pests or for
improved control of other pests. Aerial application of PROVADO PRO may result in slower activity and reduced control relative to
results from ground application. For tree and vine crops, application rates are based on full-size, mature trees or vines.
BANANA and PLANTAIN *'
Pests Controlled
Aphids
Leafhoppers
Thrips
Rate
fluid ounces/Acre
8.0
Restrictions
Pre-Harvest Interval (PHI): 0 day
Minimum interval between applications: 14 days
Maximum PROVADO PRO allowed per year: 40.0 fluid ounces/Acre (0.5 Ib AI/A) •
Applications
Apply specified dosage of PROVADO PRO as a broadcast or directed spray to infested area insuring thorough coverage. PROVADO
may be applied through properly calibrated ground or aerial application equipment. Aerial application of PROVADO may result in
slower activity and reduced control relative to results from ground application.
Addition of an organosilicone adjuvant at a rate not to exceed 2.0 fluid ounces/100 gallons, finished spray solution may improve
coverage and pest control.
v Use not permitted in California unless otherwise directed by state-specific 24(c) labeling.
BUSHBERRY
Crops of Crop Subgroup 13B Including: Blueberry, Currant. Elderberry, Gooseberry, Huckleberry, Juneberry, Lingonberry. Salal
Pests Controlled
Aphids
Leafhoppers / Sharpshooters
Blueberry maggot
Japanese beetle (adults)
Thrips (foliage feeding thrips only)
Rate
fluid ounces/Acre
3.0-4.0
6.0-8.0
Restrictions
Pre-Harvest Interval (PHI): 3 days
Minimum interval between applications: 7 days
Maximum PROVADO PRO allowed per year: 40.0 fluid ounces/Acre (0.5 Ib AI/A)
Maximum number of PROVADO PRO applications per year: 5
Minimum application volume (water): 20 GPA - ground, 5 GPA - aerial.
Do not apply pre-bloom or during bloom or when bees are foraging.
15

f
CANEBERRY1'
Crops of the Caneberry, Crop Subgroup 13A including:
Blackberry (Rubus spp. - including Andean Blackberry, Arctic blackberry, Bingleberry, Black satin berry, Boysenberry, Brombeere,
California blackberry, Chesterberry, Cherokee blackberry, Cheyene blackberry, Common blackberry, Coryberry, Darrowberry,
Dewberry, Dirksen (hornless berry, Evergreen blackberry, Himalayaberry, Hullberry, Lavacaberry, Loganberry, Lowberry, Lucretiaberry,
Mammoth blackberry, Marionberry, Moras, Mures deronce, Nectarberry, Northern dewberry, Olallieberry, Oregon evergreen berry,
Phenomenalberry, Rangeberry, Ravenberry, Rossberry, Shawnee blackberry, Southern dewberry, Tayberry, Youngberry, Zarzamora,
and varieties and/or hybrids of these)
Raspberry (Rubus spp. - including Bababerry, Black raspberry, Blackcap, Caneberry, Framboise, Frambueso, Himbeere, Keriberry,
Mayberry, Red raspberry, Thimbleberry, Tulameen, Yellow raspberry, and varieties and/or hybrids of these, and Wild raspberry)
Pests Controlled
Aphids
Leafhoppers
Thrips
Rate
fluid ounces/Acre
8.0
Restrictions
Pre-Harvest Interval (PHI): 3 day
Minimum interval between applications: 7 days
Maximum PROVADO PRO allowed per year: 24.0 fluid ounces/Acre (0.3 Ib AI/A)
Do not apply pre-bloom or during bloom or when bees are foraging.
1/ Use not permitted in California unless otherwise directed by state-specific 24(c) labeling.
CITRUS
Crops of Crop Group 10 Including: Calamondin, Citrus citron, Citrus hybrids (includes chironja, tangelo, and tangor), Grapefruit,
Kumquat, Lemon, Lime, Mandarin (tangerine), Pummelo, Orange (sweet and sour), Satsuma mandarin, and other cutivars and/or
hybrids of these
Pests Controlled
Aphids
Asian citrus psyllid
Blackfly
Leafhoppers / Sharpshooters
Leafminers
Mealybugs
Scales
Whiteflies
Rate
fluid ounces/Acre
10.0-20.0
(depending on tree size,
target pest and infestation pressure)
Pests Suppressed
Thrips (foliage feeding thrips only) 10.0-20.0
Restrictions
Pre-Harvest Interval (PHI): 0 day
Minimum interval between applications: 10 days
Maximum PROVADO PRO allowed per year: 40.0 fluid ounces/Acre (0.5 Ib AI/A)
Do not apply during bloom or within 1 0 days prior to bloom or when bees are foraging.
Applications
Scales - time applications to the crawler stage. Treat each generation.
16

f
COFFEE 1'
Pests Controlled
Aphids
Leafhoppers
Whiteflies
Pest Suppressed
Scales
Rate
fluid ounces/Acre
8.0
8.0
Restrictions:
Pre-Harvest Interval (PHI): 7 days
Minimum interval between applications: 7 days
Maximum PROVADO PRO allowed per year: 40.0 fluid ounces/Acre (0.5 Ib AI/A)
Do not apply pre-bloom or during bloom or when bees are foraging.
Applications:
Apply specified dosage of PROVADO PRO as a broadcast or directed spray to infested area insuring thorough coverage. PROVADO
may be applied through properly calibrated ground or aerial application equipment. Aerial application of PROVADO may result in
slower activity and reduced control relative to results from ground application.
1/ Use not permitted in California unless otherwise directed by state-specific 24(c) labeling.
GRAPE
Including: American bunch grape, Muscadine grape and Vinifera grape.
Pests Controlled
Leafhoppers / Sharpshooters
Mealybugs
Grapeleaf skeletonizer
Rate
fluid ounces/Acre
3.0-4.0
3.8-4.0
Restrictions
Pre-Harvest Interval (PHI): 0 day
Minimum interval between applications: 14 days
Maximum PROVADO PRO allowed per year: 8.0 fluid ounces/Acre (0.1 Ib AI/A)
PROVADO PRO may be applied by ground application only.
HOPS
Pests Controlled Rate
fluid ounces/Acre
Aphids 8.0
Restrictions
Pre-Harvest Interval (PHI): 28 days
Minimum interval between applications: 21 days
Maximum PROVADO PRO allowed per year: 24.0 fluid ounces/Acre (0.3 Ib AI/A)
17

c •r
POME FRUIT
Crops of Crop Group 11 Including: Apple, Crabapple, Loquat, Mayhaw, Pear (including Oriental pear), Quince
Pests Controlled
Leafhoppers
Aphids (except woolly apple aphid)
Apple maggot
Leafminers
San Jose scale
FOR PEAR, ONLY
Mealybugs
Pear psylla
Rate
fluid ounces/Acre
4.0-8.0
8.0
20.0
Restrictions
Pre-Harvest Interval (PHI): 7 days
Minimum interval between applications: 10 days
Maximum PROVADO PRO allowed per year: 40.0 fluid ounces/Acre (0.5 Ib AI/A)
Do not apply pre-bloom or during bloom or when bees are foraging.
Applications
Applications targeting apple maggot should be combined with manufacturer's specified rate of a sticker, such as Nu-Film 17.
POMEGRANATE *'
Pests Controlled
Aphids
Leafhoppers/Sharpshooters
Whiteflies
, Pest Suppressed
Scales
Rate
fluid ounces/Acre
8.0
8.0
Restrictions:
Pre-Harvest Interval (PHI): 7 days
Minimum interval between applications: 7 days
Maximum PROVADO PRO allowed per year: 24.0 fluid ounces/Acre (0.3 Ib AI/A)
Do not apply pre-bloom or during bloom or when bees are foraging.
" Use not permitted in California unless otherwise directed by state-specific 24(c) labeling.
18

r I
STONE FRUIT
Crops of Crop Group 12 Including: Apricot, Cherry (including sweet and tart), Nectarine, Peach, Plum (including Chickasaw, Damson
and Japanese), Plumcot, Prune (fresh and dried)
Pests Controlled
Aphids
Green June beetle
Japanese beetle
Leafhoppers / Sharpshooters
Plant bugs
Rose chafer
San Jose scale
Cherry fruit fly
Rate
fluid ounces/Acre
4.0-8.0
6.0-8.0
Pests Suppressed
Plum curculio
Stink bugs 8.0
Restrictions for Apricot, Nectarine, Peach
Pre-Harvest Interval (PHI): 0 day
Minimum interval between applications: 7 days
Maximum PROVADO PRO allowed per year: 24.0 fluid ounces/Acre (0.3 Ib AI/A)
Minimum application volume (water): 50 GPA - ground; 25 GPA - aerial.
Do not apply pre-bloom or during bloom or when bees are foraging.
Restrictions for Cherry, Plum, Plumcot, Prune
Pre-Harvest Interval (PHI): 7 days
Minimum interval between applications: 10 days
Maximum PROVADO PRO allowed per year: 40.0 fluid ounces/Acre (0.5 Ib AI/A)
Minimum application volume (water): 50 GPA - ground; 25 GPA - aerial.
Do not apply pre-bloom or during bloom or when bees are forag ng.
19

TREE NUTS i; 'except Almond
Crops of Crop Group 14 including: Beechnut, Brazil nut, Butternut, Cashew, Chestnut, Chinquapin, Filbert, Hickory nut, Macadamia
nut, Pecan, Pistachio, Walnut [black and English]
Pests Controlled
Aphids (except Black pecan aphid)
Leafhoppers/Sharpshooters
Phylloxera sp. (leaf infestations)
Spittlebugs
Whiteflies
Black pecan aphid
Mealybugs
San Jose scale
Rate
fluid ounces/Acre
3.5-7.0
8.0
Restrictions
Pre-Harvest Interval (PHI): 7 days
Minimum interval between applications: 6 days
Maximum PROVADO PRO allowed per year: 28.8 fluid ounces/Acre (0.36 Ib AI/A)
Minimum application volume (water): 50 GPA - ground application, 25 GPA - aerial application
Do not apply pre-bloom or during bloom or when bees are foraging.
Applications
Applications for control of San Jose scale should be timed according to crawler stage, treating each successive generation. Two
applications on a 10 to 14-day interval may be required to achieve control.
1/ Use not permitted in California unless otherwise directed by state-specific 24(c) labeling.
TROPICAL FRUIT
Including: Acerola, Atemoya1', Avocado, Birida1', Black sapote, Canistel, Cherimoya1', Custard Apple1', Feijoa, Jaboticaba, Guava,
Llama1', Longan, Lychee, Mamey Sapote, Mango, Papaya, Passionfruit, Persimmon, Pulasan, Rambutan, Sapodilla, Soursop1',
Spanish lime, Star apple, Starfruit, Sugar apple1', Wax jambu
Pests Controlled
Aphids
Leafhoppers / Sharpshooters
Mealybugs
Thrips (foliage feeding thrips only)
Whiteflies
Rate
fluid ounces/Acre
8.0
Pests Suppressed
Scales 8.0
Restrictions
Pre-Harvest Interval (PHI): 7 days
Minimum interval between applications: 10 days
Maximum PROVADO PRO allowed per year: 40.0 fjuid ounces/Acre (0.5 Ib AI/A)
Do not apply pre-bloom or during bloom or when bees are foraging.
i' Use not permitted in California unless otherwise directed by state-specific 24(c) labeling.
20

c f
OTHER CROPS
Applications - PROVADO®PRO Insecticide
Apply specified rate per acre as a broadcast or directed foliar spray to infested area as pest populations begin to build. Thorough
uniform coverage is necessary to achieve optimum control. A spray adjuvant may be used to improve coverage. PROVADO PRO
may not knockdown established and heavy insect populations. Two applications may be required to achieve control. Scout fields
and retreat if needed. PROVADO PRO may be tank mixed with other insecticides as specified for knockdown of pests or for
improved control of other pests.
POPLAR / COTTONWOOD1'
Including members of the genus Populus grown for pulp or timber
Pests Controlled
Aphids
Leaf beetles
Rate
fluid ounces/Acre
4.0-8.0
Restrictions
Minimum interval between applications: 10 days
Maximum PROVADO PRO allowed per year: 40.0 fluid ounces/Acre (0.5 Ib AI/A)
Do not apply pre-bloom or during bloom or when bees are foraging.
!' Use not permitted in California unless otherwise directed by state-specific 24(c) labeling.
CHRISTMAS TREE
Pests Controlled
Aphids
Adelgids
Sawflies
Rate
fluid ounces/Acre
4.0-8.0
Restrictions
Minimum interval between applications: 7 days
Maximum PROVADO PRO allowed per year: 40.0 fluid ounces/Acre (0.5 Ib AI/A)
Applications
Gall-forming adelgids - time applications to coincide with full bud-swell or first bud-break of earliest bud-breaking trees. Once galls
form spraying will be ineffective.
21

r r
IMPORTANT: READ BEFORE USE
Read the entire Directions for Use, Conditions, Disclaimer of Warranties and Limitations of Liability before using this product. If terms
are not acceptable, return the unopened product container at once.
By using this product, user or buyer accepts the following Conditions, Disclaimer of Warranties and Limitations of Liability.
CONDITIONS: The directions for use of this product are believed to be adequate and must be followed carefully. However, it is
impossible to eliminate all risks associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences
may result because of such factors as weather conditions, presence of other materials, or the manner of use or application, all of which
are beyond the control of Bayer CropScience. All such risks shall be assumed by the user or buyer.
DISCLAIMER OF WARRANTIES: TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BAYER CROPSCIENCE
MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR
PURPOSE OR OTHERWISE, THAT EXTEND BEYOND THE STATEMENTS MADE ON THIS LABEL. No agent of Bayer CropScience
is authorized to make any warranties beyond those contained herein or to modify the warranties contained herein. TO THE EXTENT
CONSISTENT WITH APPLICABLE LAW, BAYER CROPSCIENCE DISCLAIMS ANY LIABILITY WHATSOEVER FOR SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT.
LIMITATIONS OF LIABILITY: TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE
USER OR BUYER FOR ANY AND ALL LOSSES, INJURIES OR DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS
PRODUCT, WHETHER IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, SHALL NOT
EXCEED THE PURCHASE PRICE PAID, OR AT BAYER CROPSCIENCE'S ELECTION, THE REPLACEMENT OF PRODUCT.
NET CONTENTS:
Admire Pro, Calypso, Gaucho, Leverage, Provado Pro and Trimax Pro are registered trademarks of Bayer CropScience.
Actara, Centric, Cruiser and Platinum are trademarks of a Syngenta Group Company.
Assail and Intruder are registered trademarks of Nippon Soda Company, LTD.
Belay and Clutch are registered trademarks of Arvesta Corporation.
Venom is a registered trademark of Valent USA Corporation.
Bidrin is a registered trademark of AMVAC Chemical Corporation.
Alias and Pasada are trademarks of Makhteshim Agan of North America, Inc.
Couraze is a trademark of Cheminova, Inc.
Macho and Impulse are trademarks of Albaugh Inc.
Advise and Gallant are trademarks of Agriliance, LLC
Widow is a trademark of Loveland Products, Inc.
Nuprid is a trademark of NuFarm America Inc.
PRODUCED FOR
Bayer CropScience
Bayer CropScience LP
P.O. Box 12014, 2 T.W. Alexander Drive
Research Triangle Park, North Carolina 27709
1-866-99BAYER (1 -866-992-2937)
Provado Pro Insecticide Master (10/08/09) (PENDING) 09-25-13, 11-22-13, 12/12/13
22