crop-chem-docs/corpus/epa_ppls/33270-30.md

# AGENT GT

- EPA Reg No: **33270-30**
- Registrant: WINFIELD SOLUTIONS, LLC
- Signal word: Danger
- Active ingredients: Glyphosate, isopropylamine salt (31.75%); Sodium salt of fomesafen (5.88%)
- Label accepted: 2025-08-06
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/033270-00030-20250806.pdf

---
August 6, 2025 
 
Lisa Mathias 
Registration Specialist 
Winfield Solutions LLC 
P.O. Box 64589 
St. Paul, MN 55164-0589 
 
Subject: Label Amendment - Registration Review Mitigation for Fomesafen 
 Product Name: Agent GT 
 EPA Registration Number: 33270-30 
 Application Date: October 13, 2023 
 Case Number: N/A 
 
Dear Lisa Mathias: 
 
The Agency, in accordance with the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), 
as amended, has completed reviewing all the information submitted with your application to 
support the Registration Review of the above referenced product in connection with the 
Fomesafen Interim Decision, and has concluded that your submission is acceptable. The label 
referred to above, submitted in connection with registration under FIFRA, as amended, is 
acceptable. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please 
be aware that the website becomes labeling under the Federal Insecticide, Fungicide, and 
Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the 
product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 
40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In 
addition, regardless of whether a website is referenced on your product’s label, claims made on 
the website may not substantially differ from those claims approved through the registration 
process. Therefore, should the Agency find or if it is brought to our attention that a website 
contains false or misleading statements or claims substantially differing from the EPA approved 
registration, the website will be referred to the EPA’s Office of Enforcement and Compliance 
Assurance. 
 
A stamped copy of your labeling is enclosed for your records. This labeling supersedes 
all previously accepted labeling and must be used at your next label printing. You must

Page 2 of 2 
EPA Reg. No. 33270-30 
Decision No. 594543 
 
submit one copy of the final printed labeling before you release the product for 
shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may 
distribute or sell this product under the previously approved labeling for 12 months 
from the date of this letter. After 12 months, you may only distribute or sell this 
product if it bears this new revised labeling or subsequently approved labeling. “To 
distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation 
at 40 CFR 152.3. 
 
If you have any questions about this letter, please contact Concepción Rodríguez by phone at 
202-566-0820, or via email at rodriguez.concepcion@epa.gov. 
 
 
 S i n c e r e l y , 
 
 
Julie Javier, Team Leader 
Risk Mitigation and Implementation Branch 4 
Pesticide Re-Evaluation Division 
Office of Pesticide Programs 
 
 
ENCLOSURE: Stamped label

1
Fomesafen Group 14 Herbicide
Glyphosate Group 9 Herbicide
AGENT GT
[Herbicide]
For Control of Certain Weeds in Cotton and Soybeans
ACTIVE INGREDIENTS:
Sodium Salt of Fomesafen ...................................................................................................................... 5.88%
*Glyphosate, N-(phosphonomethyl)glycine, in the form of its isopropylamine salt ................................. 31.75%
OTHER INGREDIENTS..........................................................................................................................62.37 %
TOTAL ..................................................................................................................... 100.00%
Contains 0.55 pounds of fomesafen and 2.26 pounds of glyphosate expressed as acid equivalent per gallon.
KEEP OUT OF REACH OF CHILDREN
DANGER/PELIGRO
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle.
(If you do not understand the label, find someone to explain it to you in detail).
FIRST AID
IF IN EYES: xHold eye open and rinse slowly and gently with water for 15-20 minutes.
xRemove contact lenses if present after the first 5 minutes then continue rinsing.
xCall a poison control center or doctor for treatment advice.
IF INHALED: xMove person to fresh air.
xIf person is not breathing call 911 or an ambulance then give artificial respiration 
preferably mouth to mouth if possible.
xCall a poison control center or doctor for further treatment advice.
IF SWALLOWED: xCall a poison control center or doctor immediately for treatment advice.
xHave person sip a glass of water if able to swallow.
xDo not induce vomiting unless told to by a poison control center or doctor.
xDo not give anything by mouth to an unconscious person.
IF ON SKIN OR 
CLOTHING:
xTake off contaminated clothing.
xRinse skin immediately with plenty of water for 15-20 minutes.
xCall a poison control center or doctor for treatment advice.
HOT LINE NUMBER
Have the product container or label with you when calling a poison control center or doctor or going for 
treatment.
Note to physician: Probable mucosal damage may contraindicate the use of gastric lavage.
Emergency Telephone Number: (800) 424-9300 CHEMTREC (transportation and spills) 
(877) 424-7452 (human and animal health)
SEE BOOKLET FOR ADDITIONAL PRECAUTIONARY STATEMENTS, COMPLETE DIRECTIONS FOR 
USE, WARRANTY DISCLAIMER AND LIMITATION OF LIABILITY
EPA Reg. No. 33270-30 EPA Est. No. XXXXX-XX-XXX
MANUFACTURED FOR: NET CONTENTS: Gal.
 Winfield Solutions, LLC 
P.O. Box 64589
St. Paul, MN 55164-0589 2/0721/5
August 6, 2025
33270-30

2 
PRECAUTIONARY STATEMENTS 
 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
DANGER: Corrosive. Causes irreversible eye damage. Harmful if swallowed or inhaled. Do not get in 
eyes or on clothing. Avoid breathing spray mist. 
 
PERSONAL PROTECTIVE EQUIPMENT (PPE) 
 
Applicators and other handlers must wear: 
x Long sleeved shirt and long pants 
x Shoes plus socks 
x Protective eyewear such as face shields or protective goggles 
x Chemical resistant gloves made of barrier laminate, butyl rubber • mils, nitrile rubber • mils, 
QHRSUHQHUXEEHU•PLOVSRO\YLQ\OFKORULGH39&•PLOVRU9LWRQ® •PLOV 
 
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables 
exist, use detergent and hot water. Keep and wash PPE separately from other laundry. 
 
When handlers use closed systems enclosed cabs or aircraft in a manner that meets the requirements 
listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170 240(d)(4 6)], the 
handler PPE requirements may be reduced or modified as specified in the WPS. 
 
 
ENVIRONMENTAL HAZARDS 
For Terrestrial Uses: Do not apply directly to water or to areas where surface water is present or to 
intertidal areas below the mean high water mark. Do not contaminate water when disposing of equipment 
washwater or rinsate. Do not apply when weather conditions favor drift from target area. 
 
 Drift and runoff may be hazardous to aquatic organisms in water adjacent to treated areas. 
 
 Groundwater Advisory 
Fomesafen is known to leach through soil into ground water under certain conditions as a result of label 
use. This chemical may leach into ground water if used in areas where soils are permeable particularly 
where the water table is shallow. 
 
Surface Water Advisory 
This product may impact surface water quality due to spray drift and run off of rain water. This is especially 
true for poorly draining soils and soils with shallow groundwater. This product is classified as having high 
potential for reaching surface water via runoff for several months after application. A level well maintained 
vegetative buffer strip between areas to which this product is applied and surface water features such as 
ponds, streams, and springs will reduce the potential loading of fomesafen from runoff water and sediment. 
Runoff of this product will be reduced by avoiding applications when rainfall is forecasted to occur within 48 
hours. For more information, see the United States Department of Agriculture National Resource 
Conservation Service’s manual, “Conservation Buffers to Reduce Pesticide Losses”. 
 
Non-Target Organism Advisory 
This product is toxic to plants and may adversely impact the forage and habitat of non-target organisms, 
including pollinators, in areas adjacent to the treated site. Protect the forage and habitat of non-target 
organisms by following label directions intended to minimize spray drift. 
 
 
USER SAFETY RECOMMENDATIONS 
Users should: 
1. Wash hands thoroughly with soap and water after handling and before eating, drinking, chewing gum, 
using tobacco or using the toilet. 
2. Remove clothing/PPE immediately if pesticide gets inside. Then, wash thoroughly and put on clean 
clothing. 
3. Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As 
soon as possible wash thoroughly and change into clean clothing.

3 
PHYSICAL AND CHEMICAL HAZARDS 
Do not store, mix or apply this product or spray solutions of this product in unlined steel (except stainless 
steel), galvanized steel containers or sprayer tanks. This product or spray solutions of this product will react 
with these containers and tanks and produce hydrogen gas, which may form a highly combustible mixture. 
This gas mixture could flash or explode causing serious personal injury if ignited by spark, open flame, 
lighted cigarette, welder, torch or other ignition source. 
 
Spray solutions of this product must be mixed, stored and applied using only stainless steel, fiberglass, 
plastic, or plastic lined steel containers. 
 
NOTICE: Read the entire Directions for Use and Conditions of Sale and Limitation of Warranty and Liability 
before buying or using this product. If the terms are not acceptable, return the product at once unopened 
and the purchase price will be refunded. 
 
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
 
Do not apply this product in a way that will contact workers or other persons either directly or through drift. 
Only protected handlers may be in the area during application. For any requirements specific to your State 
or Tribe consult the agency responsible for pesticide regulation. 
 
 
PRODUCT INFORMATION 
AGENT GT may be applied as a preplant or preemergence burndown application in cotton or as a 
postemergence directed application in glyphosate tolerant (GT) cotton* and as a preplant or preemergence 
burndown in soybeans or as a postemergence over the top application in glyphosate tolerant (GT) 
soybeans** to control labeled broadleaf grass and sedge weeds. 
 
* AGENT GT may be used on the following glyphosate tolerant cotton only: Roundup Ready Flex Cotton. 
** AGENT GT may be used on the following glyphosate tolerant soybeans only: All Roundup Ready 
soybeans, including Roundup Ready Soybeans, Roundup Ready 2 Yield Soybeans, and all Genuity brand 
soybeans, which includes Roundup Ready 2. 
 
 Environmental And Agronomic Conditions 
Always apply AGENT GT under favorable environmental conditions that promote active weed growth. 
Avoid applying AGENT GT to weeds which are under stress from drought, extreme temperatures, 
excessive water, low humidity, low soil fertility, mechanical or chemical injury as reduced weed control 
and/or increased crop injury may result. 
 
 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard 40 CFR part 
170. This Standard contains requirements for the protection of agricultural workers on farms, forests, 
nurseries and greenhouses and handlers of agricultural pesticides. It contains requirements for training 
decontamination notification and emergency assistance. It also contains specific instructions and 
exceptions pertaining to the statements on this label about personal protective equipment (PPE) and 
restricted entry interval. The requirements in this box only apply to uses of this product that are covered by 
the Worker Protection Standard. 
 
Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 24 hours. 
 
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and 
that involves contact with anything that has been treated such as plants soil or water is: 
 
• Coveralls 
• Shoes plus socks 
• Protective eyewear such as face shields or protective goggles 
• Chemical resistant gloves made of barrier laminate, butyl rubber • mils, nitrile rubber • mils, 
QHRSUHQHUXEEHU•PLOVSRO\YLQ\OFKORULGH39&•PLOVRU9LWRQ•PLOV

4 
Pre-plant Surface, Preemergence or Postemergence Applications 
AGENT GT will control or partially control certain germinating broadleaf weeds and sedges by soil residual 
activity from either preplant surface preemergence or postemergence applications that come in contact with 
the soil. Moisture is necessary to activate AGENT GT in soil for residual weed control. Dry weather 
following applications of AGENT GT may reduce effectiveness. When adequate moisture is not received 
within 7 days after an AGENT GT application weed, control may be improved by overhead irrigation with at 
least a 1/4 inch of water. 
 
Cultivation 
Do not cultivate prior to postemergence application. Weeds may be put under stress by cultivation thus 
reducing weed control. Timely cultivation 2-3 weeks after applying AGENT GT may assist weed control. 
 
WEED RESISTANCE MANAGEMENT 
AGENT GT contains the active ingredients glyphosate which inhibits 5-enolpyruvylshikimate-3-phosphate 
(EPSP) synthase (Group 9 herbicide) and fomesafen which inhibits protoporphyrinogen oxidase (PPO 
oxidase or PROTOX) (Group 14 herbicide). Some naturally occurring weed populations have been 
identified as resistant to Group 9 and Group 14 herbicides. Selection of resistant biotypes, through 
repeated use of these herbicides or lower than specified use rates in the same field, may result in weed 
control failures. A resistant biotype may be present if poor performance cannot be attributed to adverse 
environmental conditions or improper application methods. Contact your local Winfield representative, 
retailer, crop advisor or extension agent to determine if weeds resistant to modes of action contained in 
this product are present in your area. If resistant biotypes have been reported, use the full labeled rate of 
this product, apply at the labeled timing, and tank-mix with a different mode of action product so there are 
multiple effective modes of application for each suspected resistant weed. 
 
To delay herbicide resistance, take one or more of the following steps: 
x Rotate the use of AGENT GT or other Group 9 and Group 14 herbicides within a growing season 
sequence or among growing seasons with different herbicide groups that control the same weeds in a 
field. 
x Use tank mixtures with herbicides from a different group if such use is permitted; where information on 
resistance in target weed species is available, use the less resistance-prone partner at a rate that will 
control the target weed(s) equally as well as the more resistance-prone partner. Consult your local 
extension service or certified crop advisor if you are unsure as to which active ingredient is currently 
less prone to resistance. 
x Adopt an integrated weed-management program for herbicide use that includes scouting and uses 
historical information related to herbicide use and crop rotation, and that considers tillage (or other 
mechanical control methods), cultural (e.g., higher crop seeding rates; precision fertilizer application 
method and timing to favor the crop and not the weeds), biological (weed-competitive crops or 
varieties) and other management practices. 
x Fields should be scouted before application to identify the weed species present and their growth 
stage to determine if the intended application will be effective. Scout after herbicide application to 
monitor weed populations for early signs of resistance development. Indicators of possible herbicide 
resistance include: 
1) failure to control a weed species normally controlled by the herbicide at the dose applied, 
especially if control is achieved on adjacent weeds; 
2) a spreading patch of non-controlled plants of a particular weed species; 
3) surviving plants mixed with controlled individuals of the same species. 
If resistance is suspected, prevent weed seed production in the affected area by an alternative 
herbicide from a different group or by a mechanical method including hoeing or tillage. Prevent 
movement of resistant weed seeds to other fields by cleaning harvesting and tillage equipment when 
moving between fields and planting clean seed. 
x If a weed pest population continues to progress after treatment with this product, discontinue use of 
this product and switch to another management strategy or herbicide with a different mode of action 
(MOA), if available. Treat weed escapes with an herbicide with a different MOA or use non-chemical 
methods to remove escapes. To the extent possible do not allow weed escapes to produce seeds, 
roots, or tubers.

5 
x Contact your local extension specialist, certified crop advisors, and/or Winfield Solutions, LLC 
representative for pesticide resistance management and/or integrated weed management 
recommendations for specific crops and resistant weed biotypes. 
x For further information or to report suspected resistance, contact your Winfield Solutions, LLC 
representative. 
APPLICATION DIRECTIONS 
 
Spray Adjuvants 
Under certain conditions, burndown and postemergence activity may be improved by adding one or more of 
the following spray adjuvants: 
 
Ammonium Sulfate (AMS) at 8.5 to 17 lbs/100 gallons of water should be added in areas where 
commonly used with glyphosate containing products. Liquid formulations of AMS may be used at 
an equivalent rate. 
 
Urea Ammonium Nitrate (UAN) (28.32% liquid nitrogen solution) may be added at 12.5% v/v (12.5 
gallons/100 gallons) of finished spray volume. If AMS is being added, UAN is generally not 
required. UAN can improve weed control but may reduce crop tolerance. 
 
One of the following spray adjuvants can be added for difficult to control weeds or under adverse 
environmental conditions: 
 
Crop Oil Concentrate (COC) or Methylated Seed Oil (MSO): Use a nonphytotoxic COC or MSO 
containing 15-20% approved emulsifier at 0.5 – 1.0% v/v (2- 4 quarts/100 gallons) of finished spray 
volume COC or MSO can improve weed control but may reduce crop tolerance. 
 
Nonionic Surfactant (NIS): Use NIS containing at least 80% active ingredient at 0.25 – 0.5% v/v 
(1-2 quarts/100 gallons) of finished spray volume. 
 
The use of deposition (drift control) agents that impact droplet size and coverage may reduce weed control. 
 
Tank Mixing Order: 
1. Fill the spray tank with ½ to 2/3 the required amount of water and begin agitation. 
2. Add AMS (if used). 
3. Add dry pesticide formulations (WP, DF, etc.). 
4. Add liquid pesticide formulations (EC, SC, etc.). 
5. Add AGENT GT. 
6. Add COC MSO or NIS (if used). 
7. Add the remaining water and maintain agitation throughout the spray operation. 
 
Be sure to allow each tank mix component to fully disperse before adding the next. 
 
Spray Drift Management 
Avoiding spray drift at the application site is the responsibility of the applicator. The interaction of many 
equipment-and-weather-related factors determines the potential for spray drift. The applicator and the 
grower are responsible for considering all these factors when making decisions. 
 
Where states have more stringent regulations, they should be observed. 
 
Mandatory Spray Drift Management 
Ground boom applications: 
x User must only apply with the nozzle height recommended by the manufacturer, but no more than 
3 feet above the ground or crop canopy. 
x For applications prior to the emergence of crops and target weeds, applicators are required to use 
a Coarse or coarser droplet size in accordance with the most current version of the American 
Society of Agricultural & Biological Engineers Standard 572 (ASAE S572).

6 
x For all other applications, applicators are required to use a Medium or coarser droplet size in 
accordance with the most current version of the American Society of Agricultural & Biological 
Engineers Standard 572 (ASAE S572). 
x Do not apply when wind speeds exceed 15 miles per hour at the application site. 
x Do not apply during temperature inversions. 
Aerial applications: 
x Do not release spray at a height greater than 10 ft. above the vegetative canopy, unless a greater 
application height is necessary for pilot safety. 
x For applications prior to the emergence of crops and target weeds, applicators are required to use 
a Coarse or coarser droplet size in accordance with the most current version of the American 
Society of Agricultural & Biological Engineers Standard 641 (ASABE S641). 
x For all other applications, applicators are required to use a Medium or coarser droplet size in 
accordance with the most current version of the American Society of Agricultural & Biological 
Engineers Standard 641 (ASABE S641). 
x Do not apply when wind speeds exceed 15 mph at the application site. If the windspeed is greater 
than 10 mph, the boom length must be 65% or less of the wingspan for fixed wing aircraft and 
75% or less of the rotor diameter for helicopters. Otherwise, the boom length must be 75% or less 
of the wingspan for fixed wing aircraft and 90% or less of the rotor diameter for helicopters. 
x Applicators must use ½ swath displacement upwind at the downwind edge of the field. 
x Nozzles must be oriented so the spray is directed toward the back of the aircraft. 
x Do not apply when wind speeds exceed 15 miles per hour at the application site. 
x Do not apply during temperature inversions. 
 
Spray Drift Advisories 
7+($33/,&$725,65(63216,%/()25$92,',1*2))-SITE SPRAY DRIFT. 
BE AWARE OF NEARBY NON-7$5*(76,7(6$1'(19,5210(17$/&21',7,216 
Importance of Droplet Size 
An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide target 
pest control. While applying larger droplets will reduce spray drift, the potential for drift will be great if 
applications are made improperly or under unfavorable environmental conditions. 
 
 Controlling Droplet Size – Ground Boom 
x Volume – Increasing the spray volume so that larger droplets are produced will reduce spray drift. 
Use the highest practical spray volume for the application. If a greater spray volume is needed, 
consider using a nozzle with a higher flow rate. 
x Pressure - Use the lowest spray pressures recommended for the nozzle to produce the target 
spray volume and droplet size. 
x Spray Nozzle - Use a spray nozzle that is designed for the intended application. Consider using 
nozzles designed to reduce drift. 
 
 Controlling Droplet Size – Aircraft 
x Adjust Nozzles – Follow the manufacturers recommendations for setting up nozzles. Generally, 
to reduce fine droplets, nozzles should be oriented parallel with the airflow in flight. 
 
Boom Height – Ground Boom 
Use the lowest boom height that is compatible with the spray nozzles that will provide uniform coverage. 
For ground equipment, the boom should remain level with the crop and have minimal bounce. 
 
Release Height – Aircraft 
Higher release height increase the potential for spray drift. When applying aerially to crops, do not release spray 
at a height greater than 10 ft. above the crop canopy, unless a greater application height is necessary for pilot 
safety.

7 
Shielded Sprayers 
6KLHOGLQJWKHERRPRULQGLYLGXDOQR]]OHVFDQUHGXFHVSUD\GULIW&RQVLGHUXVLQJVKLHOGHGVSUD\HUV9HULI\
that the shields are not interfering with uniform deposition of the spray on the target area. 
 
Temperature and Humidity 
When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation. 
 
Temperature Inversions 
Drift potential is high during a temperature inversion. Temperature inversions are characterized by 
increasing temperature with altitude and are common on nights with limited cloud cover and light to no 
wind. The presence of an inversion can be indicated by ground fog or by the movement of smoke from a 
ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated 
cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly 
dissipates indicates good vertical air mixing. Avoid applications during temperature inversions. 
 
Wind 
'ULIWSRWHQWLDOJHQHUDOO\LQFUHDVHVZLWKZLQGVSHHG$92,'$33/,&$7,216'85,1**867<:,1'
CONDITIONS. Applicators need to be familiar with local wind patterns and terrain that could affect spray 
drift. 
 
Sensitive Areas 
The pesticide is to be applied only when the potential for drift to adjacent sensitive areas (e. g. residential 
areas bodies of water known habitat for threatened or endangered species nontarget crops) is minimal (e. 
g. when wind is blowing away from the sensitive areas). 
 
GROUND APPLICATION 
See the Spray Drift Management section for spray drift mitigation requirements and advisories applicable 
to ground application. 
 
Use sufficient spray volume and pressure to ensure complete coverage of the target. A spray volume of 
15-20 gallons per acre and 30-60 psi at the nozzle tip is recommended. When foliage is dense, use a 
minimum of 20 gallons per acre to ensure adequate coverage. 
 
The use of flat fan nozzles will result in the most effective postemergence application of AGENT GT. 
 
AERIAL APPLICATION 
See the Spray Drift Management section for spray drift mitigation requirements and advisories applicable 
to aerial application. 
 
Use sufficient spray volume and pressure to ensure complete coverage of the target. Apply a minimum of 5 
gallons per acre of spray mixture with a maximum of 40 psi pressure. When foliage is dense, use a 
minimum of 10 gallons per acre to ensure coverage of weed foliage. 
 
DO NOT APPLY THIS PRODUCT THROUGH ANY TYPE OF IRRIGATION SYSTEM. 
 
USE PRECAUTIONS 
x Thoroughly clean the spray system with water and a commercial tank cleaner, before and after each 
use. 
x Tank mixes of AGENT GT with other pesticides fertilizers or any other additives except as specified on 
this label or other Winfield Solutions, LLC labeling or recommendations made by Winfield Solutions, 
LLC Crop Protection may result in tank mix incompatibility, unsatisfactory performance or unacceptable 
crop injury. 
x Avoid overlapping spray swaths as injury may occur in crop or to rotational crops. 
x Heavy rainfall or irrigation shortly after application may reduce performance. 
x AGENT GT is not volatile and cannot move as vapor after application onto nontarget vegetation. 
x Severe damage or destruction may be caused by contact of AGENT GT to any desirable crop or plant to 
which treatment is not intended.

8 
USE RESTRICTIONS 
x A maximum of 5.3 pts. of AGENT GT (or a maximum of 0.375 lb ai/A of fomesafen from any product 
containing fomesafen) may be applied per acre per year in Region 1 (see Regional Use Map). 
x A maximum of 5.3 pts of AGENT GT (or a maximum of 0.375 lb ai/A of fomesafen from any product 
containing fomesafen) may be applied per acre in ALTERNATE years in Region 2 (see Regional Use 
Map). 
x A maximum of 4.5 pts of AGENT GT (or a maximum of 0.315 lb ai/A of fomesafen from any product 
containing fomesafen) may be applied per acre in ALTERNATE years in Region 3 (see Regional Use 
Map). 
x A maximum of 3.5 pts of AGENT GT (or a maximum of 0.25 lb ai/A of fomesafen from any product 
containing fomesafen) may be applied per acre in ALTERNATE years in Region 4 (see Regional Use 
Map). 
x A maximum of 3.5 pts of AGENT GT (or a maximum of 0.25 lb ai/A of fomesafen from any product 
containing fomesafen) may be applied per acre in ALTERNATE years in Region 4a (see Regional Use 
Map). Apply only to soybeans in Region 4a. Do not make an AGENT GT application later than June 
20th. Cumulative rainfall plus overhead irrigation must total 15 inches from the period of AGENT GT 
application to soybean crop maturity to allow planting of rotational crops listed in this label (refer to 
Rotational Crop Restrictions section). If the soybean crop is lost or the required cumulative rainfall 
plus irrigation is not received as outlined above, plant only soybeans the following growing season. 
x A maximum of 2.68 pts of AGENT GT (or a maximum of 0.1875 lb ai/A of fomesafen from any product 
containing fomesafen) may be applied per acre in ALTERNATE years in Region 5 (see Regional Use 
Map). 
• Spray solutions of AGENT GT must be mixed, stored and applied using only plastic, plastic lined steel 
stainless steel, or fiberglass containers. Concentrate must not be stored in galvanized carbon steel 
aluminum or unlined steel containers. 
 
ROTATIONAL CROP RESTRICTIONS 
The following rotational crops may be planted after applying AGENT GT at specified rates: 
 
Crop To Be Planted Minimum Rotation Interval (Months 
After Last AGENT GT Application) 
Cotton, dry beans, potatoes, snap beans and soybeans 0 
Small grains such as wheat, barley, rye, peppers 
(transplanted), tomatoes (transplanted) 4 
Beans (other than dry/snap beans), corn*, peanuts, peas, rice 
seed 10 
To avoid crop injury do not plant alfalfa, sunflowers, sugar 
beets, sorghum** or any other crop within 18 
 
*Use a 12 month minimum rotation interval for popcorn in the states of Kentucky, Illinois, Indiana, Iowa, 
Ohio and Region 4 when applied at rates of 3.5 pints per acre or more. 
*Use 18 month minimum rotation interval for sweet corn in the states of Connecticut, Maine, 
0DVVDFKXVHWWV1HZ+DPSVKLUH1HZ<RUN5KRGH,VODQGDQG9HUPRQW 
**Sorghum may be planted back after 10 months in Region 1 
 
Replanting 
If replanting is necessary in fields previously treated with AGENT GT, the field may be replanted to cotton, 
dry beans, potatoes, snap beans or soybeans. Do not apply a second application of AGENT GT or other 
fomesafen containing product as crop injury or illegal residues may occur in harvested crops. If tank mix 
combinations were used, refer to product labels for any additional replanting instructions.

9 
 
USE RATES AND WEEDS CONTROLLED 
AGENTGT REGIONAL USE MAP 
 
 
 
Not For Use in 
Miami Dade County FL

10 
REGION 1 
(Maximum Rate 5.3 pts /A per year) 
 
 
 
Not For Use in 
Miami Dade County FL 
 
 
REGION 1 Includes the following states or portion of states where AGENT GT may be applied. Alabama, 
Arkansas, Florida (except Miami Dade County), Georgia, Louisiana, Mississippi, Missouri (counties of 
Bollinger, Butler, Cape Giradeau, Dunklin, Madison, Mississippi, New Madrid, Pemiscot, Perry, Ripley, 
Scott, Stoddard and Wayne), North Carolina, Oklahoma (East of U S Highway 75 and East of Indian Nation 
Parkway), South Carolina, Tennessee, and Texas (includes area East of U S Highway 77 to State Road 
239 including all of Calhoun County).

11 
REGION 2 
(Maximum Rate 5.3 pts /A, Alternate years) 
 
 
 
 
 
REGION 2 includes the following states or portion of states where AGENT GT may be applied. Delaware, 
.HQWXFN\0DU\ODQG9LUJLQLD:HVW9LUJLQLD6RXWKRI,QWHUVWDWHLQWKHIROORZLQJVWDWHV,OOLQRLV,QGLDQD
and Ohio and all areas South of Interstate 80 to the intersection of U. S. Highway 15 and East of U. S. 
Highway 15 and U. S. Highway 522 in Pennsylvania.

12 
REGION 3 
(Maximum Rate 4.5 pts/A, Alternate years) 
 
 
 
 
 
 
 
Region 3 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
REGION 3 Includes the following states or portion of states where AGENT GT may be applied. 
Connecticut, Iowa, Maine, Massachusetts, Missouri (all counties except for those listed in Region 1), New 
Hampshire, New Jersey, New York, Pennsylvania (all areas except those listed in Region 2), Rhode Island, 
9HUPRQWDQG Wisconsin (South of U. S. Highway 18 between Prairie Du Chien and Madison and South of 
Interstate 94 between Madison and Milwaukee) and North of Interstate 70 in the following states Indiana, 
Illinois and Ohio.

13 
REGION 4 
(Maximum Rate 3.5 pts/A, Alternate years) 
 
 
 
 
REGION 4 Includes the following states or portion of states where AGENT GT may be applied. Kansas (all 
counties East of or intersected by U S Highway 281), Michigan (Southern Peninsula), Minnesota (all areas 
South of Interstate 94), Nebraska (all counties East of or intersected by U S Highway 281) and Wisconsin 
(all areas except those in Region 3 South of Interstate 94 from Minnesota state line to Eau Claire and South 
of U S Highway 29 from Eau Claire to Green Bay plus Barron, Chippewa, Clark, Door, Dunn, Eau Claire, 
Kewaunee, Marathon, Menominee, Oconto, Polk, Shawano and St Croix counties. The following counties 
are excluded Adams, Marquette, Portage, Waupaca, Waushara and Wood), North Dakota (all areas East of 
Interstate 29 from Fargo South to the South Dakota state line), South Dakota (all areas East of Interstate 29 
from the North Dakota state line to Watertown all areas East of Highway 81 from Watertown to Madison and 
all areas East and South of State Road 34 and U. S. Highway 281 to the Nebraska state line).

14 
REGION 4a 
(Maximum Rate 3.5 pts/A, Alternate years*) 
 
 
 
 
REGION 4a Includes the following portions of states where AGENT GT may be applied Kansas (all areas 
west of U S Highway 281 to the Colorado state line) and Nebraska (all areas that intersect west of U S 
Highway 281 and east of U S Highway 83). 
 
*Note Refer to the Use Directions section for additional requirements that must be followed to use AGENT 
GT in Region 4a.

15 
REGION 5 
(Maximum Rate 2.68 pts/A, Alternate years) 
 
 
 
REGION 5 Includes the following states or portion of states where AGENT GT may be applied. North 
Dakota (all areas East of U S Highway 281 except those areas in Region 4) South Dakota (all areas East of 
U S Highway 281 except those areas in Region 4) and Minnesota (all areas South of U S Highway 2 except 
those areas in Region 4).

16 
WEEDS CONTROLLED 
 
WEEDS CONTROLLED 
*Partial control means significant activity but not always at a level considered acceptable for commercial 
weed control. 
 
Table 1 Weeds controlled or partially controlled* by preplant surface or pre-emergence application 
of AGENT GT at 3.5 to 5.3 pts /A1 
 
Broadleaf Weeds Controlled Soil Texture Organic 
Matter 
Amaranth Palmer Amaranthus palmen 
 
All soil types 
 
 
Up to 5% 
Croton tropic2 Croton glandulosus 
Eclipta Eclipta prostrata 
Galinsoga species Galinsoga spp 
Lambsquarters common Chenopodium album 
Morningglory smallflower Jacquemontia tamnifolia 
Nightshade black Solanum nigrum 
Nightshade eastern black Solanum ptychanthum 
Pigweed redroot Amaranthus retroflexus 
Pigweed smooth Amaranthus hybridus 
Poinsettia wild Euphorbia heterophylla 
Purslane common Portulaca oleracea 
Ragweed common2 Ambrosia artemisiifolia 
Sida prickly2 Sida spinosa 
Starbur bristly Acanthospermum hispidum 
Broadleaf Weeds Partially 
Controlled* 
 
Anoda spurred Anoda cristata 
Cocklebur common Xanthium strumarium 
Morningglory entireleaf Ipomoea hederacea var integriuscula 
Morningglory ivyleaf Ipomoea hederacea 
Morningglory pitted (small white) Ipomoea lacunosa 
Morningglory red (scarlet) Ipomoea coccinea 
Morningglory tall (common) Ipomoea purpurea 
Nightshade hairy Solanum physalifolium 
Ragweed giant Ambrosia trifida 
Waterhemp species Amaranthus spp 
Sedges Partially Controlled* 
Nutsedge yellow Cyperus esculentus 
 
*Partial control means significant activity but not always at a level considered acceptable for commercial 
weed control. 
 
1Use the higher end of the rate range when heavy weed populations are anticipated. 
2Rates less than 5.3 pts /A will provide only partial control of this weed.

17 
Table 2 Broadleaf weeds controlled by postemergence application of AGENT GT 
 
 
Broadleaf Weeds 
Controlled1 
 
 
Scientific Name 
AGENT GT Rate (pts/A) 
Maximum Growth Stage Controlled At 
3.5 pts/A 
Maximum 
Height (inches) 
4.5 pts/A 
Maximum 
Height (inches) 
5.3 pts/A 
Maximum 
Height (inches) 
Amaranth Palmer 
(glyphosate susceptible) 
Amaranthus 
palmen 
4 4 6 
 
Amaranth Palmer 
(glyphosate resistant)1 
Amaranthus 
palmen 
1 2 3 
 
Amaranth spiny Amaranthus 
spinosus 
2 2 4 
Anoda spurred Anoda cnstata 4 6 8 
Buttercup species3 Ranunculus spp 6 8 10 
Carpetweed Mollugo verticillata 6 Diameter Multi leaf 
6 Diameter 
Unlimited Size 
Chickweed common Stellana media 6 8 10 
Chickweed mouseear Cerastium 
fontanum ssp 
vulgare 
6 8 10 
Citronmelon Citrullus lanatus 2 4 6 
Cocklebur common Xanthium 
strumarium 
4 6 8 
Copperleaf 
hophornbeam 
Acalypha ostryifolia 2 2 4 
Copperleaf 9LUJLQLD Acalypha virginica 2 2 4 
Crotalaria showy Crotalaria 
spectabilis 
4 6 8 
Croton tropic Croton glandulosus 2 4 6 
Cucumber volunteer Cucumis sativas 2 4 6 
Deadnettle purple Lamium 
purpureum 
4 6 8 
Eclipta Eclipta prostrata 6 8 10 
Eveningprimrose cutleaf Oenothera 
laciniata 
4 6 8 
Groundcherry cutleaf Physalis angulata 4 6 6 
Henbit Lamium 
amplexicaule 
4 6 8 
Jimsonweed Datura stramonium 4 6 8 
Lambsquarters common Chenopodium 
album 
4 8 10 
Morningglory 
cypressvine 
Ipomoea quamoclit 4 4 6 
 
Morningglory entireleaf 
var 
Ipomoea 
hederacea var 
integnuscula 
3 3 4 
Morningglory ivyleaf Ipomoea 
hederacea 
3 3 4 
Morningglory purple 
moonflower 
Ipomoea turbmata 3 4 4 
Morningglory red 
(scarlet) 
Ipomoea coccmea 3 3 4 
Morningglory smallflower Jacquemontia 3 3 4

18 
 
Broadleaf Weeds 
Controlled1 
 
 
Scientific Name 
AGENT GT Rate (pts/A) 
Maximum Growth Stage Controlled At 
3.5 pts/A 
Maximum 
Height (inches) 
4.5 pts/A 
Maximum 
Height (inches) 
5.3 pts/A 
Maximum 
Height (inches) 
 tamnifolia 
Morningglory pitted 
(Small white) 
Ipomoea lacunosa 4 4 4 
Morningglory tall 
(common) 
Ipomoea purpurea 3 3 4 
Morningglory palmleaf 
(willowleaf) 
Ipomoea wnghtii 3 3 4 
Mustard wild Sinapis arvensis 6 8 10 
Nightshade black Solanum nigrum 4 6 8 
Pigweed redroot Amaranthus 
retroflexus 
4 6 6 
Pigweed smooth Amaranthus 
hybridus 
4 4 6 
Poinsettia wild Euphorbia 
heterophylla 
4 6 8 
Purslane common Portulaca oleracea Multi Leaf 4 
Diameter 
Multi Leaf 6 
Diameter 
Multi Leaf 8 
Diameter 
Pusley Florida Richardia scabra 4 6 8 
Ragweed common 
(glyphosate susceptible) 
Ambrosia 
artemisiifolia 
4 5 6 
Ragweed common 
(glyphosate resistant)1 
Ambrosia 
artemisiifolia 
2 4 5 
Ragweed giant 
(glyphosate susceptible) 
Ambrosia trifida 4 6 8 
Ragweed giant 
(glyphosate resistant)1,2 
Ambrosia trifida 2 2 4 
Redweed Melochia 
corchonfolia 
4 6 8 
Sesbania hemp Sesbania exaltata 6 8 10 
Shepherdspurse Capsella bursa 
pastoris 
6 8 10 
Sicklepod Senna obtusifolia 2 3 4 
Sida prickly Sida spinosa 2 3 4 
Smartweed ladysthumb Polygonum 
persicana 
4 6 8 
Smartweed Pennsylvania Polygonum 
pennsylvanicum 
4 6 8 
Spurge prostrate Chamaesyce 
humistrata 
4 6 8 
Spurge spotted Chamaesyce 
maculata 
4 6 8 
Starbur bristly Acanthospermum 
hispidum 
4 6 8 
Sunflower common Helianthus annuus 4 6 8

19 
 
Broadleaf Weeds 
Controlled1 
 
 
Scientific Name 
AGENT GT Rate (pts /A) Maximum Growth Stage 
Controlled At 
3.5 pts /A 
Maximum 
Height (inches) 
4.5 pts /A 
Maximum Height 
(inches) 
5.3 pts /A 
Maximum 
Height (inches) 
9HOYHWOHDI Abutilon theophrasti 4 6 8 
9HQLFH mallow Hibiscus trionum 4 4 6 
Waterhemp species 
(glyphosate susceptible) 
Amaranthus spp 2 4 6 
Waterhemp species 
(glyphosate resistant)1 
Amaranthus spp 2 3 4 
Yellow rocket Barbarea vulgaris 6 8 10 
 
Partial control means significant activity but not always at a level considered acceptable for commercial 
weed control. 
1 Weed biotypes that have multiple resistances to both glyphosate and protoporphyrinogen oxidase inhibitor 
herbicides will not be controlled by AGENT GT, see your local Winfield Solutions, LLC representative 
and/or state university extension recommendations for control programs. 
2 Partial control* of glyphosate resistant giant ragweed see your local Winfield Solutions, LLC representative 
and/or state university extension recommendations for control programs 
3Control will be reduced at the button stage. 
 
Table 3 Grasses controlled by postemergence application of AGENT GT 
Grass Weeds 
Controlled
1 
 
Scientific Name 
AGENT GT Rate (pts /A) Maximum Growth 
Stage Controlled At 
3.5 pts /A 
Maximum 
Height 
(inches) 
4.5 pts /A 
Maximum 
Height 
(inches) 
5.3 pts /A 
Maximum 
Height (inches) 
Barley volunteer Hordeum vulgare 24 
Barnyardgrass Echinochloa crus galli 6 10 12 
Bluegrass annual Poa annua 12 
Corn volunteer 
(glyphosate susceptible) 
Zea mays 24 
Crabgrass species Digitaria spp 12 
Foxtail species Setana spp 18 
Goosegrass Eleusine indica 6 8 12 
Johnsongrass seedling1 Sorghum halepense 12 18 
Oats volunteer Avena sativa 18 
Oats wild Avena fatua 18 
Panicum browntop Panicum fasciculatum 10 18 
Panicum fall Panicum dichotomiflorum 6 10 
Panicum Texas Panicum texanum 10 18 
Red Rice Oryza sativa 3 
Rye volunteer Secale cereale 12 18 
Ryegrass Italian (annual)1 Lolium multiflorum 8 10 
Shattercane Sorghum bicolor 12 16 
Sprangletop species Leptochloa spp 18 
Signalgrass broadleaf Brachiana platyphylla 8 10 
Wheat volunteer Tnticum aestivum 18 
Wild proso millet Panicum miliaceum 12 16 
Witchgrass Panicum capillare 12 
Woolly cupgrass Enochloa villosa 12 
1AGENT GT will not control glyphosate resistant seedling johnsongrass and Italian ryegrass biotypes or 
 other glyphosate resistant grass species.

20 
COTTON 
 
Burndown and Residual Weed Control Applications 
AGENT GT can provide burndown of emerged weeds and residual control of certain germinating broadleaf 
weeds and sedges in cotton. 
 
Application to Coarse Textured Soils 
Apply AGENT GT from 3.5 to 5.3 pts/A as preplant surface or preemergence application to coarse textured 
soils (sandy loam loamy sand sandy clay loam) only. 
 
Refer to Table 1 for use rates and weeds controlled by preplant surface or preemergence applications and 
Tables 2 and 3 for use rates weed growth stages and weeds controlled by postemergence applications. 
 
Application to Medium or Fine Textured Soils 
Apply AGENT GT at 3.5 pts/A as a preplant surface application to medium or fine textured soils (i.e. soil 
types heavier than coarse textured soils) up to 21 days prior to planting cotton. Apply after the last tillage 
operation is completed. 
 
Refer to Table 1 for weeds controlled by preplant surface applications and Tables 2 and 3 for weed growth 
stages and weeds controlled by postemergence applications. 
 
Do not exceed 3.5 pts/A of AGENT GT on medium or fine textured soils. Also, to avoid severe crop injury, 
the following use directions must be followed when applications are made to medium or fine textured soils. 
 
x After AGENT GT application, a minimum of 0.5 inch of rainfall or overhead irrigation must occur before 
planting cotton. 
x Cotton must be planted at least 0.75 inch in depth. 
x Do not overlap spray swaths. 
x Do not disturb or re-work the seedbed following application. 
 
The use of an in-furrow or seed applied fungicide will generally assist with seedling establishment and 
development. 
 
USE DIRECTIONS FOR BURNDOWN AND RESIDUAL WEED CONTROL APPLICATIONS 
Emerged weeds must have thorough spray coverage for effective control. Refer to the Spray Adjuvants 
section for directions on spray adjuvants for postemergence weed control. 
 
Moisture is necessary to activate AGENT GT in soil for residual weed control. Dry weather following 
application of AGENT GT may reduce residual activity. When adequate moisture is not received within 7 
days after a AGENT GT application, residual weed control may be improved with at least a ¼ inch of 
overhead irrigation. 
 
Cotton plants are tolerant to AGENT GT when applied at specified rates and application use directions. 
Some crinkling or spotting of cotton foliage or stunting may occur but cotton plants normally outgrow these 
effects and develop normally.

21 
Tank Mixes for Burndown and Residual Weed Control Applications 
AGENT GT can be applied in a tank mix with the following products: Caparol®, Cotoran®, Dicamba 
Direx®, Glyphosate products (such as Touchdown® or Roundup® brands) Karmex®, Prowl® H
20, 
Solicam® and Staple®. Refer to individual product labels for precautionary statements, restrictions, rates 
and a list of weeds controlled. 
 
Post Directed Application in Roundup Ready Flex Cotton 
Apply AGENT GT in emerged Roundup Ready Flex cotton as a post directed treatment using precision post 
directed hooded or shielded application equipment to provide complete coverage of emerged weeds. Apply 
AGENT GT at 3.5 pts/A in a minimum of 15 gallons spray solution per acre. Applications may be made 
broadcast or banded. Post directed applications of AGENT GT will provide contact control of labeled weeds 
and residual preemergence control of labeled weeds (once activated by rainfall or irrigation). Refer to Table 
1 for weeds controlled or partially controlled through residual activity and Tables 2, 3 for weeds controlled 
by postemergence activity. Do not exceed 3.5 pts/A as a post directed application in Roundup Ready Flex 
cotton. 
 
Cotton foliage is not tolerant to AGENT GT applications. Avoid contact to cotton foliage as unacceptable 
injury will occur. Application equipment should be calibrated (spray pressure, nozzle type and 
configuration, and orifice size) to avoid fine spray droplets contacting green cotton stems and foliage. 
 
Post Directed Application Timing in Roundup Ready Flex Cotton 
AGENT GT may be applied as a post directed application to Roundup Ready Flex cotton when cotton is at 
least 6 inches in height through layby. All post directed applications should avoid spray contact with any 
green, non-barked parts of the cotton plant or foliage as unacceptable injury will occur. Follow the 
application timing directions below for post directed applications in Roundup Ready Flex cotton. 
 
Shielded and Hooded Applications 
Make a precision post directed AGENT GT application to the base of the cotton plant avoiding contact 
with the cotton stem or foliage when cotton is at least 6 inches in height to avoid cotton injury. Use only 
hooded or shielded spray equipment to apply AGENT GT in cotton that is 6 inches in height. Adjust 
nozzles to provide full coverage of emerged target weeds. 
 
Layby Applications 
Make a post directed AGENT GT application to the base of the cotton plant avoiding contact with any 
non-barked portion of the cotton plant or foliage. Use precision post directed equipment or hooded or 
shielded sprayers on cotton that has developed a minimum of 4 inches of brown bark through layby. 
Application equipment should be configured to provide full coverage of emerged target weeds. 
 
Tank Mixes for Post Directed Applications 
AGENT GT can be applied in a tank mix with most cotton herbicides which are labeled for post directed 
hooded or shielded applications. Refer to individual product labels for precautionary statements, 
restrictions, rates and a list of weeds controlled. 
 
Use Restrictions Cotton 
x DO NOT apply AGENT GT over the top of cotton, as plant death will occur. 
x Do not exceed 5.3 pints of AGENT GT per acre in any one year and also adhere to the maximum rate 
that may be applied in each geographic region (refer to the AGENT GT Regional Use Map). 
x Do not exceed 3.5 pints of AGENT GT per acre as a preplant surface application to medium or fine 
textured soil. 
x Do not exceed 3.5 pints of AGENT GT per acre, as a post directed application. 
x Do not apply AGENT GT later than 70 days before harvest.

22 
SOYBEANS 
Burndown and Residual Weed Control Applications for Glyphosate Tolerant and Non Glyphosate 
Tolerant Soybeans 
 
AGENT GT can provide burndown of emerged weeds and residual control of certain germinating broadleaf 
weeds and sedges from either a preplant surface or preemergence application in soybeans. 
 
Refer to Table 1 for rates and weeds controlled by preplant surface or preemergence applications and 
Tables 2 and 3 for rates weed growth stages and weeds controlled by postemergence applications. 
 
Emerged weeds must have thorough spray coverage for effective control. Refer to the Spray Adjuvants 
section for directions on spray adjuvants for postemergence weed control. 
 
Moisture is necessary to activate AGENT GT in soil for residual weed control. Dry weather following 
application of AGENT GT may reduce effectiveness of residual activity. When adequate moisture is not 
received within 7 days after an AGENT GT application residual weed control may be improved with at least 
a ¼ inch of overhead irrigation. 
 
Preplant Surface or Preemergence Tank Mix Applications Soybeans 
AGENT GT can be tank mixed with the following products for preplant surface or preemergence 
applications in glyphosate tolerant and non-glyphosate tolerant soybeans: 2-4,-D, Dicamba, Glyphosate 
products (such as Touchdown or Roundup brands). 
 
Refer to the tank mix partner label for use directions restrictions and limitations. The most restrictive 
product labeling applies. 
 
Postemergence Over The Top Applications in Glyphosate Tolerant Soybeans 
AGENT GT can provide postemergence control of a broad spectrum of grass and broadleaf weeds as an 
over the top application in glyphosate tolerant soybeans. Refer to Tables 2 and 3 for specific directions on 
weed growth stages, rates and weeds controlled. Emerged weeds must have thorough spray coverage for 
effective control. Refer to the Spray Adjuvants section for directions on spray adjuvants for postemergence 
weed control. 
 
Postemergence in crop applications of AGENT GT that come in contact with soil may control or partially 
control certain germinating broadleaf weeds and sedges. 
 
Some bronzing, crinkling or spotting of soybean leaves may occur following postemergence applications, 
but soybeans soon outgrow these effects and develop normally. 
 
Postemergence Split Application Program for Glyphosate Tolerant Soybeans in Regions 1 and 2 
A postemergence split application of AGENT GT may be applied in Regions 1 and 2. Apply AGENT GT at 
2.68 pts/A with methylated seed oil (MSO) adjuvant at 1% v/v when weeds are 1 to 2 inches in height 
followed by a second application of AGENT GT at 2.68 pts/A with MSO at 1% v/v when re-growth or newly 
emerged weeds are 1 to 2 inches in height (approximately 10-14 days after the first application). The total 
amount of AGENT GT in the split application program cannot exceed 5.3 pts/A. 
 
Special Postemergence - Use Rate for Specific Weed Control Situations for Glyphosate Tolerant 
Soybeans in Regions 1, 2, 3 and 4. 
AGENT GT may be applied at 2.8 pts/A in Regions 1, 2, 3 and 4 as a postemergence application to control 
non glyphosate resistant weeds including difficult to control weeds such as morningglory, velvetleaf and 
black nightshade in glyphosate tolerant soybeans. Apply when weeds are 1-4 inches in height. 
 
Special Postemergence Use Rate for Specific Weed Control Situations for Glyphosate Tolerant 
Soybeans in Region 5. 
AGENT GT may be applied at 2.68 pts/A in Region 5 as a postemergence application to control 
non-glyphosate resistant weeds including difficult to control weeds such as velvetleaf and black nightshade 
in glyphosate tolerant soybeans. Apply when weeds are 1 - 3 inches in height.

23 
 
Postemergence Over The Top Tank Mix Applications - Glyphosate Tolerant Soybeans Only 
AGENT GT can be tank mixed with the following products for postemergence applications in glyphosate 
tolerant soybeans: Dual Magnum®, Fusilade®, DX Fusion® and Glyphosate products (such as Touchdown 
or Roundup brands). 
 
Refer to the tank mix partner label for use directions restrictions and limitations. The most restrictive product 
labeling applies. 
 
Use Restrictions Soybeans 
x DO NOT apply AGENT GT as an over the top application to non-glyphosate tolerant soybeans as plant 
death will occur. 
x Refer to AGENT GT Regional Use Map for the maximum rate of AGENT GT (or other fomesafen 
containing products) that may be applied in each geographic region. Do not apply to any field in 
Regions 2, 3, 4 or 5 more than once every two years. 
x Do not exceed 5.3 pints of AGENT GT per acre in any one year and also adhere to the maximum rate 
that may be applied in each geographic region (refer to the AGENT GT Regional Use Map). 
x Do not graze treated areas or harvest for forage or hay. 
x Do not apply within 45 days of harvest.

24 
STORAGE AND DISPOSAL 
 
Do not contaminate water food or feed by storage or disposal. 
 
PESTICIDE STORAGE - Store above Û) If product freezes, return to room temperature and agitate 
to reconstitute. Keep container closed when not in use. Do not store near food or feed In case of spill 
or leak on floor or paved surfaces soak up with sand earth or synthetic absorbent. Remove to chemical 
waste area. 
 
PESTICIDE DISPOSAL - Pesticide wastes are acutely hazardous. Improper disposal of excess 
pesticide spray mixture or rinsate is a violation of federal law. If these wastes cannot be disposed of by 
use according to label instructions, contact your State Pesticide or Environmental Control Agency or 
the Hazardous Waste Representative at the nearest EPA Regional Office for guidance. 
 
CONTAINER HANDLING [less than 5 gallons] 
Non-refillable container. Do not reuse or refill this container. Offer for recycling, if available. Triple 
rinse container (or equivalent) promptly after emptying. Triple rinse as follows: empty the remaining 
contents into application equipment of a mix tank. Drain for 10 seconds after the flow begins to drip. 
Fill the container 10% full with water and recap. Shake for 10 seconds. Pour rinsate into application 
equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow 
begins to drip. Repeat this procedure two more times. Then offer for recycling if available or puncture 
and dispose of in a sanitary landfill or by incineration or if allowed by state and local authorities by 
burning.
 If burned stay out of smoke. 
 
CONTAINER HANDLING [Bulk/Mini Bulk] 
Refillable container. Refill this container with AGENT GT only. Do not reuse this container for any 
other purpose. Cleaning the container before final disposal is the responsibility of the person 
disposing of the container. Cleaning before refilling is the responsibility of the refiller. To clean 
container before final disposal, empty the remaining contents from this container into application 
equipment or mix tank. Fill the container about 10 percent full with water. Agitate vigorously or 
recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or 
rinsate collection system. Repeat this rinsing procedure two more times. Then offer for recycling, if 
available, or puncture and dispose of in a sanitary landfill or by incineration or, if allowed by state and 
local authorities, by burning. If burned stay out of smoke. 
 
For minor spills leaks, etc. follow all precautions indicated on this label and clean up immediately. 
Take special care to contain spills leaks and other accidents to prevent further exposure of facilities 
and equipment. Absorb spilled product with absorbing materials and dispose of in an approved waste 
disposal facility. 
 
CONTAINER IS NOT SAFE FOR FOOD, FEED OR DRINKING WATER. 
 
 
FOR CHEMICAL EMERGENCY: Spill, leak, fire, exposure, or accident, call 
CHEMTREC 1-800-424-9300 
 
 
WARRANTY 
The Directions for Use of this product must be followed carefully. It is impossible to eliminate all risks 
inherently associated with the use of this product. Crop injury, ineffectiveness or other unintended 
consequences may result because of such factors as manner of use or application weather or crop 
conditions presence of other materials or other influencing factors in the use of the product which are beyond 
the control of Winfield Solutions, LLC or Seller. To the extent permitted by applicable law Buyer and Use 
agree to hold Winfield Solutions, LLC and Seller harmless for any claims relating to such factors. 
 
Winfield Solutions, LLC warrants that this product conforms to the chemical description on the label and is 
reasonably fit for the purposes stated in the Directions for Use subject to the inherent risks referred to above

25 
when used in accordance with directions under normal use conditions. To the extent permitted by applicable 
law: (1) this warranty does not extend to the use of this product contrary to label instructions or under 
conditions not reasonably foreseeable to or beyond the control of Seller or Winfield Solutions, LLC and (2) 
Buyer and User assume the risk of any such use TO THE EXTENT PERMITTED BY APPLICABLE LAW. 
WINFIELD SOLUTIONS, LLC MAKES NO WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR 
A PARTICULAR PURPOSE NOR ANY OTHER EXPRESS OR IMPLIED WARRANTY EXCEPT AS 
WARRANTED BY THIS LABEL. 
 
To the extent permitted by applicable law, in no event shall Winfield Solutions, LLC be liable for any incidental 
consequential or special damages resulting from the use or handling of this product TO THE EXTENT 
PERMITTED BY APPLICABLE LAW, THE (;&/86,9( REMEDY OF THE USER OR BUYER, AND THE 
(;&/86,9( /,$%,/,7< 2) WINFIELD SOLUTIONS, LLC AND SELLER FOR ANY AND ALL CLAIMS, 
LOSSES, INJURIES OR DAMAGES (INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, 
CONTRACT, NEGLIGENCE, TORT, STRICT LIABILIT Y OR OTHERWISE) RESULTING FROM THE USE 
OR HANDLING OF THIS PRODUCT SHALL BE THE RETURN OF THE PURCHASE PRICE OF THE 
PRODUCT OR AT THE ELECTION OF WINFIELD SOLUTIONS, LLC OR SELLER, THE REPLACEMENT 
OF THE PRODUCT. 
 
Winfield Solutions, LLC and Seller offer this product and Buyer and User accept it subject to the foregoing 
Conditions of Sale and Limitations of Warranty and Liability which may not be modified except by written 
agreement signed by a duly authorized representative of Winfield Solutions, LLC. 
 
Caparol
® Dual Magnum® Flexstar® GT 3 5 Fusilade® DX Fusion® ISOLINK™ Technology II Sohcam® Suprend™ 
Touchdown® are Trademarks of a ALBAUGH, INC. Company 
Cotoran® trademark of Makhteshim Agan of North America Inc 
Direx® Karmex® Staple® and 9LWRQ® trademarks of E I du Pont de Nemours and Company 
Prowl® trademark of BASF Ag Products 
Roundup® and Roundup Ready® trademarks of Monsanto Company 
Agent® is a registered trademark of Winfield Solutions, LLC