crop-chem-docs/corpus/epa_ppls/33270-32.md

# TETRABAN

- EPA Reg No: **33270-32**
- Registrant: WINFIELD SOLUTIONS, LLC
- Signal word: Caution
- Active ingredients: Azoxystrobin (22.9%)
- Label accepted: 2026-03-20
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/033270-00032-20260320.pdf

---
March 20, 2026
SENT BY EMAIL
Blake Cowen
bcowen@landolakes.com
WINFIELD SOLUTIONS, LLC
Subject: Labeling Notification per Pesticide Registration Notice (PRN) 98-10 - adding ABN to label
Product Name: TETRABAN
Admin Number: 33270-32
EPA Receipt Date: 02/06/2026
Action Case Number: 00683730
Dear Blake Cowen:
The U.S. Environmental Protection Agency is in receipt of your application for notification under Pesticide
Registration Notice 98-10 for the above referenced product. The EPA has conducted a review of this request
for its applicability under PRN 98-10 and finds that the action requested falls within the scope of PRN 98-10.
The labeling submitted with this application has been stamped "Notification" and will be placed in our records.
The alternate brand name: Altisolo has been added to the registration. Our records have been updated
accordingly.
Should you wish to add/retain a reference to your company’s website on your label, then please be aware that
the website becomes labeling under the Federal Insecticide, Fungicide, and Rodenticide Act and is subject to
review by the EPA. If the website is false or misleading, the product will be considered to be misbranded and
sale or distribution of the product is unlawful under FIFRA section 12(a)(1)(E). 40 CFR § 156.10(a)(5) lists
examples of statements the EPA may consider false or misleading. In addition, regardless of whether a
website is referenced on your product’s label, claims made on the website may not substantially differ from
those claims approved through the registration process. Therefore, should the EPA find or if it is brought to
our attention that a website contains statements or claims substantially differing from statements or claims
made in connection with obtaining a FIFRA section 3 registration, the website will be referred to the EPA’s
Office of Enforcement and Compliance Assurance.
 If you have questions, please contact Yasmin Bowers via email at bowers.yasmin@epa.gov.
Sincerely,
Yasmin Bowers, Risk Manager FB, RD
Office of Pesticide Programs
YASMIN BOWERS
Digitally signed by YASMIN BOWERS 
Date: 2026.03.20 09:37:46 -04'00'

Page 1 of 49 
AZOXYSTROBIN GROUP 11 FUNGICIDE 
 
 
 
TETRABAN® 
[Alternate Brand Names: Altisolo™] 
Broad spectrum fungicide for control of plant diseases 
ACTIVE INGREDIENT: 
Azoxystrobin: methyl (E)-2-{2-[6-(2-cyanophenoxy) 
pyrimidin-4-yloxy]phenyl}-3-methoxyacrylate* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.9% 
OTHER INGREDIENTS: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77.1% 
 TOTAL: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100.0% 
*IUPAC 
Contains 2.08 lb. of active ingredient per gallon 
Suspension Concentration 
 
 
 
KEEP OUT OF REACH OF CHILDREN 
CAUTION 
 
 
SEE BOOKLET FOR ADDITIONAL PRECAUTIONARY STATEMENTS, COMPLETE DIRECTIONS FOR 
USE, WARRANTY DISCLAIMER AND LIMITATION OF LIABILITY 
 
 
Reformulation is prohibited. See individual container labels for repackaging limitations. 
 
 
FIRST AID 
IF ON SKIN OR 
CLOTHING: 
• Take off contaminated clothing. 
• Rinse skin immediately with plenty of water for 15-20 minutes. 
• Call a poison control center or doctor for treatment advice. 
HOT LINE NUMBER 
Have the product container or label with you when calling a poison control center or doctor, or going 
for treatment. 
In case of medical emergency, call toll-free 1-877-424-7452. 
 
 
 
 
 
 
 
 
EPA Reg. No. 33270-32 EPA Est. No. _____________ 
 
 
MANUFACTURED FOR: NET CONTENTS: ________ gallons 
Winfield Solutions, LLC 
P.O. Box 64589 
St. Paul, MN 55164-0589 2/1007/5 
 
33270-32
03/20/2026

Page 2 of 49 
PRECAUTIONARY STATEMENTS 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
 
CAUTION: Harmful if absorbed through skin. Avoid contact with skin, eyes or clothing. Wash thoroughly 
with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the 
toilet. Remove and wash contaminated clothing before reuse. 
 
Human flagging is prohibited. 
 
PERSONAL PROTECTIVE EQUIPMENT (PPE) 
 
Mixers, loaders, applicators, and other handlers must wear: 
• Long-sleeved shirt and long pants 
• Chemical-resistant gloves made of any waterproof material such as polyvinyl chloride, nitrile 
rubber or butyl rubber 
• Shoes plus socks 
• In addition, mixers/loaders/applicators using mechanically pressurized handwands except when 
applying to Christmas tree farms, and golf course turf (tees, greens, fairways) must wear a 
minimum of a NIOSH-approved particulate filtering facepiece respirator with any R or P filter; OR 
a NIOSH-approved elastomeric particulate respirator with any R or P filter; OR a NIOSH -
approved powered air purifying respirator with HE filters. 
 
For Non-Agricultural Use 
Respirator fit testing, medical qualification, and training: 
Use a program that conforms to OSHA’s requirements (see 29 CFR 1910.134), employers must 
verify that any handler who uses a respirator is: 
-Fit tested and fit-checked 
-Trained, and 
-Examined by a qualified medical practitioner to ensure physical ability to safely wear the style of 
respirator to be worn. A qualified medical practitioner is a physician or other licensed health care 
professional who will evaluate the ability of a worker to wear a respirator. The initial evaluation 
consists of a questionnaire that asks about medical conditions (such as a heart condition) that 
would be problematic for respirator use. If concerns are identified, then additional evaluations, 
such as a physical exam, might be necessary. The initial evaluation must be done before 
respirator use begins. Handlers must be reexamined by a qualified medical practitioner if their 
health status or respirator style or use-conditions change. Upon request by 
local/state/federal/tribal enforcement personnel, employers must provide documentation 
demonstrating how they have complied with these requirements. 
 
 
 
USER SAFETY REQUIREMENTS 
Follow the manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables 
exist, use detergent and hot water. Keep and wash PPE separately from other laundry. 
 
ENGINEERING CONTROLS 
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements 
listed in the Worker Protection Standard (WPS) for agricultural pesticides, the handler PPE requirements 
may be reduced or modified as specified in the WPS (40 CFR 170.607(d -f)), the handler PPE 
requirements may be reduced or modified as specified in the WPS. 
 
IMPORTANT: When reduced PPE is worn because a closed system is being used, handlers must be 
provided all PPE specified above for “applicators and other handlers ” and have such PPE immediately 
available for use in an emergency, such as a spill or equipment breakdown. 
 
USER SAFETY RECOMMENDATIONS 
Users should: 
1. Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. Wash

Page 3 of 49 
thoroughly with soap and water after handling. 
2. Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean 
clothing. 
3. Remove PPE immediately after handling this product. Wash the outside of gloves before removing. 
As soon as possible, wash thoroughly and change into clean clothing. 
 
ENVIRONMENTAL HAZARDS 
This pesticide is toxic to freshwater and estuarine/marine fish and aquatic invertebrates. Do not apply 
directly to water except as specified on this label. For terrestrial uses, do not apply directly to water, or to 
areas where surface water is present or to intertidal areas below the mean high water mark. Drift and runoff 
may be hazardous to aquatic organisms in neighboring areas. Do not contaminate water wh en disposing 
of equipment washwater or rinsate. 
 
Ground Water Advisory 
Azoxystrobin and a degradate of azoxystrobin are known to leach through soil to ground water under certain 
conditions as a result of label use. This chemical may leach into ground water if used in areas where soils 
are permeable, particularly where the water table is shallow. 
 
Surface Water Advisory 
This product may impact surface water quality due to runoff of rain water. This is especially true for poorly 
draining soils and soils with shallow ground water. This product is classified as having a high potential for 
reaching surface water via runoff fo r several months or more after application. A level, well -maintained 
vegetative buffer strip between areas to which this product is applied and surface water features such as 
ponds, streams, and springs will reduce the potential loading of azoxystrobin and a degradate of 
azoxystrobin from runoff water and sediment. Runoff of this product will be reduced by avoiding applications 
when rainfall or irrigation is expected to occur within 48 hours. 
 
Notify State and/or Federal authorities and Winfield Solutions, LLC immediately if you observe any adverse 
environmental effects due to use of this product. 
 
 
PHYSICAL OR CHEMICAL HAZARDS 
Do not mix or allow coming into contact with oxidizing agent. Hazardous chemical reaction may occur. 
 
DIRECTIONS FOR USE 
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. 
 
Use of TETRABAN through air blast application equipment on grapes is prohibited in the following 
townships and boroughs of Erie County, Pennsylvania: North East, Harbor creek, Lawrence Park, Erie, 
Presque Isle, Millcreek, Fairview, Girard and Springfield. 
 
This prohibition is intended to help eliminate phytotoxicity problems with apples observed in this geographic 
location. 
 
FAILURE TO FOLLOW THE USE DIRECTIONS AND PRECAUTIONS ON THIS LABEL MAY RESULT IN 
PLANT INJURY OR POOR DISEASE CONTROL. 
 
Do not apply this product in a way that will contact workers or other persons, either directly or through drift. 
Only protected handlers may be in the area during application. For any requirements specific to your State 
or Tribe, consult the agency responsible for pesticide regulation.

Page 4 of 49 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR 
part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, 
nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, 
decontamination, notification, and emergency assistance. It also contains specific instructions and 
exceptions pertaining to the statements on this label about personal protective equipment (PPE ), 
notification to workers, and restricted -entry interval. The requirements in this box only apply to uses of 
this product that are covered by the Worker Protection Standard. 
 
Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 4 hours. 
 
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and 
that involves contact with anything that has been treated, such as plants, soil or water is: 
1. Coveralls 
2. Chemical-resistant gloves made of any waterproof material such as polyvinyl chloride, nitrile rubber 
or butyl rubber 
3. Shoes plus socks 
 
NON-AGRICULTURAL USE REQUIREMENTS 
The requirements in this box apply to uses of this product that are not within the scope of the Worker 
Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is 
used to produce agricultural plants on farms, forests, nurseries, or greenhouses. The area being treated 
must be vacated by unprotected persons. 
 
Do not treat areas while unprotected humans or domestic animals are present in the treatment areas. 
Because certain states may require more restrictive reentry intervals, consult your State Department of 
Agriculture for further information. 
 
Do not allow entry into treatment area until area that was treated with this product is dry. 
 
 
 
PRODUCT INFORMATION 
TETRABAN is a broad spectrum, preventative fungicide with systemic and curative properties 
recommended for the control of many important plant diseases. These additional benefits are due to 
positive effects on plant physiology. The effects may vary according to factors such as the crop, crop hybrid, 
or environment. TETRABAN may be applied as a foliar spray in alternating spray programs or in tank mixes 
with other registered crop protection products. All applications must be made according to the use directions 
that follow. 
 
USE RESTRICTIONS 
DO NOT spray TETRABAN where spray drift may reach apple trees. 
 
DO NOT use spray equipment which has been previously used to apply TETRABAN to spray apple trees. 
Even trace amounts can cause unacceptable phytotoxicity to certain apple and crabapple varieties. 
 
DO NOT graze or feed clippings from treated turf areas to animals. 
 
DO NOT use in greenhouses. 
 
DO NOT spray when conditions favor drift beyond area intended for application. Conditions which may 
contribute to drift include thermal inversion, wind speed and direction, sprayer nozzle/pressure 
combinations, spray droplet size, etc. Contact your State extension agent for spray drift prevention 
guidelines in your area.

Page 5 of 49 
DO NOT use spray equipment which has been previously used to apply TETRABAN to spray apple trees. 
Even trace amounts can cause unacceptable phytotoxicity to certain apple and crabapple varieties. 
 
USE PRECAUTIONS 
TETRABAN is extremely phytotoxic to certain apple varieties. 
 
AVOID SPRAY DRIFT. Extreme care must be used to prevent injury to apple trees (and apple fruit). 
 
AVOIDING SPRAY DRIFT IS THE RESPONSIBILITY OF THE APPLICATOR. 
 
TETRABAN may demonstrate some phytotoxic effects when mixed with products that are formulated as ECs. 
These effects are enhanced if applications are made under cool, cloudy conditions and these conditions remain 
for several days following application. In addition, adjuvants that contain some form of silicone have also 
contributed to phytotoxicity. 
 
PRODUCT USE INSTRUCTIONS 
Application: Thorough coverage is necessary to provide good disease control. Make no more spray solution 
than is needed for application. Avoid spray overlap, as crop injury may occur. 
 
• Adjuvants: When an adjuvant is to be used with this product, the use of an adjuvant that meets the 
standards of the Council of Producers & Distributors of Agrotechnology (CPDA) adjuvant 
certification is recommended. 
Efficacy: Under certain conditions conducive to extended infection periods, use another registered fungicide 
for additional applications if maximum amount of TETRABAN has been used. If resistant isolates to Group 
11 fungicides are present, efficacy can be reduced for certain diseases. The higher rates in the rate range 
and/or shorter spray intervals may be required under conditions of heavy infection pressure, with hig hly 
susceptible varieties, or when environmental conditions are conducive to disease. 
 
INTEGRATED PEST (DISEASE) MANAGEMENT 
Integrate TETRABAN into an overall disease and pest management strategy whenever the use of a 
fungicide is required. Follow cultural practices known to reduce disease development . This include s 
selection of varieties with disease tolerance, removal of plant debris in which inoculum overwinters, and 
proper timing and placement of irrigation. Consult your local agricultural authorities for additional IPM 
strategies established for your area. TETRABAN may be used in State Agricultural Extension advisory 
(disease forecasting) programs which specify application timing based on environmental factors favorable 
for disease development. 
 
Crop Tolerance: Plant tolerance has been found to be acceptable for all crops on the label, however, not 
all possible tank -mix combinations have been tested under all conditions. When possible, it is 
recommended to test the combinations on a small portion of the crop to ensure that a phytotoxic response 
will not occur as a result of application. See Product Use Precautions for apple phytotoxicity information. 
 
RESISTANCE MANAGEMENT 
 
AZOXYSTROBIN GROUP 11 FUNGICIDE 
 
GROUP 11 FUNGICIDES 
For resistance management, TETRABAN contains a Group 11 (azoxystrobin) fungicide. The mode of 
action for TETRABAN is the inhibition of the Qol (quinone outside) site within the electron transport system. 
Any fungal population may contain individuals naturally resistant to TETRABAN and other Group 11 
fungicides. A gradual or total loss of pest control may occur over time if these fungicides are used repeatedly 
in the same fields. Appropriate resistance-management strategies should be followed. Because resistance 
development cannot be predicted, when using this product, conform to resistance management strategies 
established for the crop and use area. Consult your local or State agricultural authorities for resistance 
management strategies that are complementary to those in this label. 
 
Winfield Solutions, LLC encourages responsible resistance management to ensure effective long -term 
control of the fungal diseases on this label.

Page 6 of 49 
 
Follow the crop specific resistance management specifications in the directions for use. 
 
To delay fungicide resistance, take one or more of the following steps: 
• Rotate the use of Azoxystrobin or other Group 11 fungicides (strobilurins, including pyraclostrobin 
and trifloxystrobin) within a growing season sequence with different fungicide groups that control the 
same pathogens. 
• Use tank mixtures with fungicides from a different group that are equally effective on the target pest 
when such use is permitted. Use at least the minimum application rate as labeled by the manufacturer. 
• Adopt an integrated disease management program for fungicide use that includes scouting, uses 
historical information related to pesticide use, and crop rotation, and which considers host plant 
resistance, impact of environmental conditions on disease development, disease thresholds, as well 
as cultural, biological and other chemical control practices. 
• Where possible, make use of predictive disease models to effectively time fungicide applications. 
Note that using predictive models alone is not sufficient to manage resistance. 
• Monitor treated fungal populations for resistance development. 
• Contact your local extension specialist or certified crop advisor and/or Winfield Solutions, LLC 
representative for any additional pesticide resistance-management and/or IPM recommendations for 
specific crops and pathogens. 
• For further information or to report suspected resistance contact your local Winfield Solutions, LLC 
representative. 
 
If no resistance management specifications on the number of applications are provided in the directions for 
use, follow the specifications in the table below. 
 
If planned total number of fungicide applications per 
crop is: 1 2 3 4 5 6 7 8 9 10 11 12 
Specified Solo Qol fungicide sprays 1 1 2 2 2 2 2 3 3 3 3 4 
Specified Qol fungicide sprays in mixture (tank-mix or 
formulated) 1 2 2 2 2 3 3 4 4 5 5 6 
 
In situations requiring multiple sprays, develop year-long spray programs for Group 11 (Qol) fungicides. In 
crops where two sequential Group 11 fungicide applications are made, alternate the applications with two 
or more applications of a fungicide that is not in Group 11. If more than 12 applications are made, observe 
the following guidelines: 
 
• When using a Qol fungicide as a solo product, the number of applications must be no more than 1/3 
(33%) of the total number of fungicide applications per year. 
• For Qol mixes in programs in which tank mixes or pre mixes of Qol with mixing partners of a different 
mode of action are utilized, the number of Qol containing applications must be no more than 1/2 (50%) 
of the total number of fungicide applications per year. 
• In programs in which applications of Qol are made with both solo products and mixtures, the number 
of Qol containing applications must be no more than 1/2 (50%) of the total number of fungicide 
applications per year. 
 
If a Group 11 fungicide is applied to the seed or soil, do not make another application with a Group 11 
fungicide for at least 3 weeks. 
 
ROTATIONAL CROP RESTRICTIONS 
The following crops may be planted at the specified interval following application of TETRABAN fungicide. 
 
Crop Rotational Interval Plant back interval 
Buckwheat, millet 12 months 
All other crops with Azoxystrobin registered uses 0 days 
 
SOILBORNE/SEEDLING DISEASE CONTROL 
For those crops that have specific use directions for soil borne disease control: TETRABAN can provide 
control of many soil borne diseases if applied early in the growing year. Specific applications for soil borne 
diseases include in-furrow applications and banded applications applied over the row, either shortly after

Page 7 of 49 
plant emergence or during herbicide applications or cultivation. These applications will provide control of 
pre- or postemergence damping off and diseases that infect plants at the soil-plant interface. 
 
The use of either type of application depends on the cultural practices in the region. In some locations, one 
type of application may provide better disease control than the other, depending on the timing of the disease 
epidemic. Seedling diseases are gene rally controlled by in -furrow applications while banded applications 
are more effective against soil borne diseases that develop later in the season. Consult your local expert 
to get some guidance regarding application type. 
 
Under cool, wet conditions, crop injury from soil directed applications can occur. 
 
BANDED 
• Apply TETRABAN prior to infection as a directed spray to the soil, using single or multiple nozzles, 
adjusted 
• Limit the band width to 7 inches or less. 
• Apply TETRABAN at a rate of 0.40 -0.80 fl. oz. product (0.10 -0.20 oz. a.i.)/1000 row feet. For banded 
applications on 22-inch rows, the maximum application rate is 0.70 fl. OZ./1000 row feet. 
• These applications come into contact with the foliage and are counted as foliar applications when 
considering resistance management. 
• They may be applied during cultivation or hilling operations to provide soil incorporation. 
 
IN-FURROW 
• Apply TETRABAN as an in-furrow spray in 3-15 gallons of water at planting. 
• Mount the spray nozzle so the spray is directed into the furrow just before the seeds are covered. 
• Use the higher rate when the weather conditions are expected to be conducive for disease 
development, if the field has a history of Pythium problems, or if minimum/low till programs are in place. 
 
IN-FURROW APPLICATION RATES 
RATE PER 1000 ROW FEET PRODUCT PER ACRE (fl. oz.) 
fl. oz. product oz. a.i. 22" rows 30" rows 32" rows 34" rows 36" rows 38" rows 40" rows 
0.40 0.10 9.5 7.0 6.5 6.1 5.8 5.5 5.2 
0.60 0.15 14.3 10.5 9.8 9.2 8.7 8.3 7.8 
0.80 0.20 14.0 13.0 12.2 11.6 11.0 10.4 
22" = 23,760 row ft., 30" = 17,424 row ft., 32" = 16,335 row ft., 34" = 15,374 row ft., 36" = 14,520 row ft., 
38" = 13,756 row ft., and 40" = 13,068 row ft./Acre 
 
Restriction: Do not apply more than 15 fl. oz/A 
 
DRIP 
Refer to the Application Instructions Through Irrigation System section. 
 
SPRAY DRIFT MANAGEMENT 
To avoid spray drift, do not apply when conditions favor drift beyond the target area. The interaction of 
many equipment and weather related factors determine the potential for spray drift. AVOIDING SPRAY 
DRIFT AT THE APPLICATION SITE IS THE RESPONSIBILITY OF THE APPLICATOR AND THE 
GROWER. 
 
MANDATORY SPRAY DRIFT 
 
Aerial Applications 
• Do not release spray at a height greater than 10 ft. above the crop canopy, unless a greater application 
height is necessary for pilot safety. 
• Applicators are required to select nozzles that deliver Medium to coarse spray droplets in accordance 
with ASABE Standard S-572.1. 
• Do not apply when wind speeds exceed 15 mph at the application site. If the windspeed is greater 
than 10 mph, the boom length must be 65% or less of the wingspan for fixed wing aircraft and 75% or 
less of the rotor diameter for helicopters. Otherwise, the boom length must be 75% or less of the 
wingspan for fixed-wing aircraft and 90% or less of the rotor diameter for helicopters.

Page 8 of 49 
• Applicators must use a 1/2 swath displacement upwind at the downwind edge of the field. 
• Do not apply during temperature inversions. 
 
Groundboom Applications 
• User must only apply with the release height recommended by the manufacturer, but no more than 4 
feet above the ground or crop canopy. 
• Applicators are required to use a medium or coarser droplet size (ASABE S572.1). 
• Do not apply when wind speeds exceed 15 miles per hour at the application site. 
• Do not apply during temperature inversions. 
 
Airblast Applications 
• Sprays must be directed into the canopy. 
• Do not apply when wind speeds exceed 15 miles per hour at the application applications site. 
• User must turn off outward pointing nozzles at row ends and when spraying outer rows. 
• Do not apply during temperature inversions. 
 
SPRAY DRIFT ADVISORIES 
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF -SITE SPRAY DRIFT. BE AWARE OF 
NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS. 
 
Importance of Droplet Size 
An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide target 
pest control. While applying larger droplets will reduce spray drift, the potential for drift will be greater if 
applications are made improperly or under unfavorable environmental conditions. 
 
Controlling Droplet Size – Groundboom 
• Volume - Increasing the spray volume so that larger droplets are produced will reduce spray drift. 
Use the highest practical spray volume for the application. If a greater spray volume is needed, 
consider using a nozzle with a higher flow rate. 
• Pressure - Use the lowest spray pressure recommended for the nozzle to produce the target spray 
volume and droplet size. 
 
• Spray Nozzle - Use a spray nozzle that is designed for the intended application. Consider using 
nozzles designed to reduce drift. 
 
Controlling Droplet Size – Aircraft 
Adjust Nozzles - Follow nozzle manufacturers recommendations for setting up nozzles. Generally, to 
reduce fine droplets, nozzles should be oriented parallel with the airflow in flight. 
 
Boom Height 
For ground equipment, the boom should remain level with the crop and have minimal bounce. 
 
Release Height 
Higher release heights increase the potential for spray drift. 
 
Shielded Sprayers 
Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify 
that the shields are not interfering with the uniform deposition of the spray on the target area. 
 
Temperature and Humidity 
When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation. 
 
 
Temperature Inversions 
Drift potential is high during a temperature inversion. Temperature inversions are characterized by 
increasing temperature with altitude and are common on nights with limited cloud cover and light to no wind. 
The presence of an inversion can be indicated by ground fog or by the movement of smoke from a ground 
source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud

Page 9 of 49 
(under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates 
indicates good vertical air mixing. 
 
Wind 
Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND 
CONDITIONS. Applicators need to be familiar with local wind patterns and terrain that could affect spray 
drift. 
 
 
 
MIXING AND APPLICATION METHODS 
Spray Equipment 
TETRABAN may be applied with all types of spray equipment commonly used for making ground and aerial 
applications. Proper adjustments and calibration of spraying equipment to give good canopy penetration 
and coverage is essential for good disease control. 
 
Nozzles 
• Equip sprayers with nozzles that provide accurate and uniform application. 
• Ensure that nozzles are the same size and uniformly spaced across the boom. 
• Calibrate sprayer before use. 
• It is suggested that screens be used to protect the pump and to prevent nozzles from clogging. 
• Ensure that screens placed on the suction side of the pump 16-mesh or coarser. 
• Do not place a screen in the recirculation line. 
• Use 50-mesh or coarser screens between the pump and boom, and where required, at the nozzles. 
• Check nozzle manufacturer's recommendations. 
 
Pump 
• Use a pump with capacity to: 
1. Maintain 35-40 psi at nozzles 
2. Provide sufficient agitation in tank to keep mixture in suspension - this requires recirculation of 10% 
of tank volume per minute. 
• Use a jet agitator or liquid sparge tube for agitation. 
• Do not air sparge. 
 
For more information on spray equipment and calibration, consult sprayer manufacturers and state 
specifications. For specific local directions and spray schedules, consult the current state agricultural 
specifications. 
 
 
Mixing Instructions 
• TETRABAN is a suspension concentrate (SC) formulation. 
• Prepare no more spray mixture than is required for the immediate operation. 
• Thoroughly clean spray equipment before using this product. 
• Agitate the spray solution before and during application. 
• Rinse spray tank thoroughly with clean water after each day's use and dispose of pesticide rinsate by 
application to an already treated area. 
 
TETRABAN Alone (No Tank Mix) 
• Add 1/2 - 2/3 of the required amount of water to the spray or mixing tank. 
• With the agitator running, add TETRABAN to the tank. 
• Continue agitation while adding the remainder of the water. 
• Begin application of the spray solution after TETRABAN has completely dispersed into the mix water. 
• Maintain agitation until all of the mixture has been sprayed. 
 
TETRABAN + Tank Mixtures: TETRABAN is usually compatible with all tank -mix partners listed on this 
label. It is the pesticide user's responsibility to ensure that all products are registered for the intended use. 
Read and follow the applicable restrictions and limitations and directions for use on all product labels 
involved in tank mixing. Users must follow the most restrictive directions for use and precautionary

Page 10 of 49 
statements of each product in the tank mixture. 
 
To determine the physical compatibility of TETRABAN with other products, use a jar test. Using a quart jar, 
add the proportionate amounts of the products to 1 qt. of water. Add wettable powders and water dispersible 
granular products first, then liquid flowables, and emulsifiable concentrates last. After thoroughly mixing, let 
stand for at least 5 minutes. If the combination remains mixed or can be remixed readily, it is physically 
compatible. Once compatibility has been proven, use the same procedure for a dding required ingredients 
to the spray tank. 
 
TETRABAN has demonstrated some phytotoxic effects when mixed with products that are formulated as 
emulsifiable concentrates (EC). These effects are enhanced if applications are made under cool, cloudy 
conditions and these conditions remain for several days followi ng application. In addition, adjuvants that 
contain some form of silicone have also contributed to phytotoxicity. 
 
Mixing in the Spray Tank 
• Add 1/2 to 2/3 of the required amount of water to the spray or mixing tank. 
• With the agitator running, add the tank -mix partner(s) into the tank in the same order as described 
above. 
• Allow the material to completely dissolve and disperse into the mix water. Continue agitation while 
adding the remainder of the water and TETRABAN to the spray tank. 
• Allow TETRABAN to completely disperse. 
• Spray the mixture with the agitator running. 
 
APPLICATION INSTRUCTIONS THROUGH IRRIGATION SYSTEMS (CHEMIGATION) 
Application Through Irrigation Systems (Chemigation) 
• Use only on crops for which chemigation is specified on this label. 
• Apply this product only through center pivot, solid set, hand move, or moving wheel irrigation systems. 
Do not apply this product through any other type of irrigation system. 
• Crop injury, lack of effectiveness, or illegal pesticide residues in the crop can result from non -uniform 
distribution of treated water. 
• Apply in 0.1-0.25 inches/acre. Excessive water may reduce efficacy. 
• If you have questions about calibration, you should contact State Extension Service specialists, 
equipment manufacturers, or other experts. 
• Do not connect an irrigation system (including greenhouse systems) used for 
• pesticide application to a public water system, unless the pesticide label-prescribed ' safety devices for 
public water systems are in place. 
• A person knowledgeable of the chemigation system and responsible for its operation, or under the 
supervision of the responsible person, shall shut the system down and make necessary adjustments 
should the need arise. 
 
Spray Preparation: Chemical tank and injector system should be thoroughly cleaned. Flush system with 
clean water. 
 
Drip irrigation: TETRABAN may be applied through drip irrigation systems for soil borne disease control. 
The soil should have adequate moisture capacity prior to drip application. 
 
Terminate drip irrigation at fungicide depletion from the main feed supply tank or after 6 hours from start, 
whichever is shorter. For maximum efficacy, subsequent irrigation (water only) should be delayed for at 
least 24 hours following drip application. 
 
Sprinkler Irrigation 
• Apply this product through sprinkler irrigation systems including center pivot, lateral move, end tow, 
side [wheel] roll, traveler, big gun, solid set, or hand move irrigation systems. 
• Do not apply this product through any other type of irrigation system except as specified on this label. 
• Apply with center pivot or continuous-move equipment distributing ½ acre-inch or less during treatment. 
• In general, use the least amount of water required for proper distribution and coverage. 
• If stationary systems (solid set, handlines or wheel lines other than continuous -move) are used, this 
product should be injected into no more than the last 20-30 minutes of the set.

Page 11 of 49 
• Do not apply when winds are greater than 10-15 mph to avoid drift or wind skips. 
• Do not apply when wind speed favors drift beyond the area intended for treatment. 
• Plant injury, lack of effectiveness, or illegal pesticide residues in the crop can result from non -uniform 
treated water. 
• Thorough coverage of foliage is required for good control. 
• Maintain agitation during the entire application period. 
 
If you have questions about calibration you should contact State Extension Service specialist, equipment 
manufacturers or other experts. 
 
Operating Instructions 
1. Do not apply when wind speed favors drift beyond the area intended for treatment. 
2. The system must contain a functional check valve, vacuum relief valve, and low pressure drain 
appropriately located on the irrigation pipeline to prevent water-source contamination from backflow. 
3. The pesticide injection pipeline must contain a functional, automatic, quick -closing check valve to 
prevent the flow of fluid back toward the injection pump. 
4. The pesticide injection pipeline must also contain a functional, normally closed, solenoid-operated valve 
located on the intake side of the injection pump and connected to the system interlock to prevent fluid 
from being withdrawn from the supply tank when the irrigation system is either automatically or manually 
shut down. 
5. The system must contain functional interlocking controls to automatically shut off the pesticide injection 
pump when the water pump motor stops. 
6. The irrigation line or water pump must include a functional pressure switch which will stop the water 
pump motor when the water pressure decreases to the point where pesticide distribution is adversely 
affected. 
7. Systems must use a metering pump, such as a positive displacement injection pump (e.g., diaphragm 
pump) effectively designed and constructed of materials that are compatible with pesticides and 
capable of being fitted with a system interlock. 
8. Allow sufficient time for pesticide to be flushed through all lines and all nozzles before turning off 
irrigation water. A person knowledgeable of the chemigation system and responsible for its operation, 
or under the supervision of the responsible person, shall shut the system down and make necessary 
adjustments should the need arise. 
9. Do not connect an irrigation system (including greenhouse systems) used for pesticide application to a 
public water system unless the pesticide label -prescribed safety devices for public water systems are 
in place. 
 
 
 
 
 
Center Pivot Irrigation Equipment 
Notes: (1) Use only with drive systems which provide uniform water distribution. (2) Do not use end guns 
when chemigating TETRABAN through center pivot systems because of non-uniform application. 
• Determine the size of the area to be treated. 
• Determine the time required to apply 1/8 to 1/2 inch of water over the area to be treated when the 
system and injection equipment are operated a t normal pressures as specified by the equipment 
manufacturer. 
• When applying TETRABAN through irrigation equipment use the lowest obtainable water volume while 
maintaining uniform distribution. Run the system at 80-95% of the manufacturer's rated capacity. 
• Using water, determine the injection pump output when operated at normal line pressure. 
• Determine the amount of TETRABAN required to treat the area covered by the irrigation system. 
• Add the required amount of TETRABAN and sufficient water to meet the injection time requirements to 
the solution tank. 
• Make sure the system is fully charged with water before starting injection of the TETRABAN solution. 
Time the injection to last at least as long as it takes to bring the system to full pressure. 
• Maintain constant solution tank agitation during the injection period. 
• Continue to operate the system until the TETRABAN solution has cleared the sprinkler head. 
 
Solid Set, Hand Move, and Moving Wheel Irrigation Equipment

Page 12 of 49 
• Determine the acreage covered by the sprinklers. 
• Fill injector solution tank with water and adjust flow rate to use the contents over a 20 to 30 -minute 
interval. When applying TETRABAN through irrigation equipment use the lowest obtainable water 
volume while maintaining uniform distribution. 
• Determine the amount of TETRABAN required to treat the area covered by the irrigation system. 
• Add the required amount of TETRABAN into the same quantity of water used to calibrate the injection 
period. 
• Operate the system at the same pressure and time interval established during the calibration. 
• Stop injection equipment after treatment is completed. Continue to operate the system until the 
TETRABAN solution has cleared the last sprinkler head. 
 
Specific Instructions for Public Water Systems 
1. Public water system means a system for the provision to the public of piped water for human 
consumption if such system has at least 15 service connections or regularly serves an average of at 
least 25 individuals daily at least 60 days out of the year. 
2. Chemigation systems connected to public water systems must contain a functional, reduced -pressure 
zone, back-flow preventer (RPZ) or the functional equivalent in the water supply line upstream from the 
point of pesticide introduction. As an option to the R PZ, discharge the water from the public water 
system into a reservoir tank prior to pesticide introduction. There shall be a complete physical break 
(air gap) between the outlet end of the fill pipe and the top or overflow rim of the reservoir tank of at 
least twice the inside diameter of the fill pipe. 
3. The pesticide injection pipeline must contain a functional, automatic, quick -closing check valve to 
prevent the flow of fluid back toward the injection pump. 
4. The pesticide injection pipeline must contain a functional, normally closed, solenoid -operated valve 
located on the intake side of the injection pump and connected to the system interlock to prevent fluid 
from being withdrawn from the supply tank when the irrigation system is either automatically or manually 
shut down. 
5. The system must contain functional interlocking controls to automatically shut off the pesticide injection 
pump when the water pump motor stops, or in cases where there is no water pump, when the water 
pressure decreases to the point where pesticide distribution is adversely affected. 
6. Systems must use a metering pump, such as a positive displacement injection pump (e.g., diaphragm 
pump) effectively designed and constructed of materials that are compatible with pesticides and 
capable of being fitted with a system interlock. 
7. Do not apply when wind speed favors drift beyond the area intended for treatment. 
 
 
 
SPECIFIC CROP USE DIRECTIONS 
Alfalfa 
(See Nongrass Animal Feeds Forage, Fodder, Straw and Hay) 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Almonds 
 
 
Alternaria Leaf and 
Fruit Spot 
(Alternaria 
alternata) 
Anthracnose 
 (Colletotrichum 
 acutatum) 
Leaf Blight 
 (Seimatosporium 
 lichenicola) 
Leaf Rust 
 (Tranzschelia discolor) 
Scab 
 (Cladosporium 
 carpophilum) 
6.0 - 15.5 
(0.10 - 0.25) 
Begin TETRABAN applications prior to disease development 
and continue throughout the year following the resistance 
management guidelines. Applications may be made by 
ground, air or chemigation. For aerial applications apply in a 
minimum of 15 GPA. Thorough and uniform coverage is 
essential for disease control. Reduced efficacy has been 
observed when uniform coverage cannot be obtained. 
 
TETRABAN may be applied by air only at growth stages prior 
to and including 5 weeks after petal fall. An adjuvant may be 
added at specified rates. 
 
Anthracnose, scab and shot hole: Begin applications prior to 
disease development and continue at 7- to 14-day intervals.

Page 13 of 49 
Shot Hole 
 (Wilsonomyces 
 carpophilus) 
Blossom blight: Begin applications at early bloom and 
continue through petal fall. 
 
Do not apply more than two sequential applications of 
TETRABAN or other Group 11 fungicides before 
alternation with a fungicide that is not in Group 11. 
Brown Rot Blossom 
Blight 
 (Monilinia laxa, 
 M. fructicola) 
12.0 - 15.5 
(0.20 - 0.25) 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 90 fl. oz. of product/A/year. 
a. Do not apply more than 1.5 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 5 applications per year at the high rate (15.5 fl. oz./A) or 15 applications per year at the low rate 
(6.0 fl. oz./A). When applying at 12.0 fl. oz./A, do not apply more than 7 applications per year. 
5) Pre-Harvest Interval (PHI): Do not apply TETRABAN within 28 days of harvest. 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Artichoke, Globe Ramularia Leaf Spot 
 (Ramularia 
 cynarae) 
11.0 - 15.5 
(0.18 - 0.25) 
Begin applications prior to or in the early stages of 
disease development, and continue as needed at a 2 -3 
week interval, up to and including the day of harvest. Do 
not apply at less than 7 -day intervals. Applications may 
be made by ground, air or chemigat ion. For ground 
applications, apply in 50-200 gallons of water per acre to 
obtain coverage without excessive runoff. For aerial 
applications, apply in a minimum of 5 gallons of water per 
acre. An adjuvant may be added at specified rates. 
 
Do not apply more than one application of TETRABAN or 
other Group 11 fungicides before alternation with a 
fungicide that is not in Group 11. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 88 fl. oz. of product/A/year. 
a. Do not apply more than 1.5 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 5 applications per year at the high rate (15.5 fl .oz./A) or 8 applications per year at the low rate 
(11.0 fl. oz./A). 
5) Pre-Harvest Interval (PHI): TETRABAN may be applied the day of harvest. 
 
 
 
 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Asparagus Stemphyllium Purple Spot 
 (Stemphyllium 
 vesicarium) 
6.0 - 15.5 
(0.10 - 0.25) 
Begin TETRABAN applications prior to disease 
development and continue on a 7 - to 14 -day schedule, 
following the resistance management guidelines. 
Applications may be made by ground, air or chemigation. An 
adjuvant may be added at specified rates. Use a minimum 
of 10 gallons of water per acre by ground, and minimum of 
3 gallons per acre by air. An adjuvant may be added at 
specified rates. 
 
Do not apply more than one application of TETRABAN or 
other Group 11 fungicides before alternation with a fungicide 
that is not in Group 11. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 90 fl. oz. of product/A/year. 
a. Do not apply more than 1.5 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 5 applications per year at the high rate (15.5 fl. oz./A) or 15 applications per year at the low rate

Page 14 of 49 
(6.0 fl. oz./A). 
5) Pre-Harvest Interval (PHI): Do not apply TETRABAN within 100 days of harvest (100-day PHI) 
 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Bananas 
Plantains 
Black Sigatoka 
 (Mycosphaerella 
fijiensis) 
 
Yellow Sigatoka 
 (Mycosphaerella 
 musicola). 
5.5 - 8.5 
 
(0.09 - 0.135) 
Begin TETRABAN applications prior to disease 
development and continue every 12 -14 days following the 
resistance management guidelines. Applications may be 
made by ground, air or chemigation. An adjuvant may be 
added at specified rates. 
 
Do not apply more than two sequential applications of 
TETRABAN or other Group 11 fungicides before 
alternation with a fungicide that is not in Group 11. 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 12 days 
3) Maximum Annual Rate: Do not apply more than 66 fl. oz. of product/A/year. 
a. Do not apply more than 1.08 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 7 applications per year at the high rate (8.5 fl. oz./A) or 12 applications per year at the low rate 
(5.5 fl. oz./A). 
5) Pre-Harvest Interval (PHI): TETRABAN may be applied the day of harvest. 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Cereals 
 
Barley 
Oats 
Rye 
Kernel Blight 
(Alternaria spp.) 
Leaf Rust 
 (Puccinia hordei) 
6.0 - 12.0 
(0.10 - 0.20) 
Apply TETRABAN prior to disease development. Protecting 
the flag leaf is important for maximizing disease control. For 
best results, sufficient water volume must be used to 
provide thorough coverage. TETRABAN can be applied by 
ground, air or chemigation. A crop oil concentrate adjuvant 
may be added at 1.0% v/v to optimize efficacy. For 
chemigation, apply in 0.1 -0.25 inches/A of water. 
Chemigation with excessive water may lead to a decrease 
in efficacy. 
 
Do not apply more than two sequential applications of 
TETRABAN or other Group 11 fungicides before 
alternation with a fungicide that is not in Group 11. 
Barley Stripe 
 (Drechslera graminea = 
 Pyrenophora graminea) 
Net Blotch 
 (Pyrenophora teres) 
9.0 – 12.0 
(0.15 – 0.20) 
Powdery Mildew 
 (Erysiphe graminis f. sp. 
 hordei) 
Stagonospora Blotch 
 (Stagonospora 
 nodorum) 
12.0 
(0.20) 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Do not apply after Feekes 10.54. 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: Do not apply more than 24 fl. oz. product/A/year. 
a. Do not apply more than 0.40 lb. a.i./A/year of azoxystrobin-containing products. 
5) Do not apply more than two (2) applications of Tetraban or other Group 11 fungicides per year. 
6) Pre-Harvest Interval (PHI): Do not apply TETRABAN within 7 days of grazing or harvest for forage and hay. 
 
 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions

Page 15 of 49 
Berries 
Bushberry 
Subgroup 13-07B 
 
Aronia Berry 
Blueberry, Highbush 
Blueberry, Lowbush 
Buffalo Currant 
Chilean Guava 
Cranberry, 
 Highbush 
Currant, Black 
Currant, Red 
Elderberry 
European Barberry 
Gooseberry 
Honeysuckle, Edible 
Huckleberry 
Jostaberry 
Juneberry 
 (Saskatoon Berry) 
Lingonberry . 
Native Currant 
Salal 
Sea Buckthorn 
 
Including all cultivars 
and/or hybrids of 
these 
Alternaria Fruit Rot 
 (Alternaria spp.) 
Anthracnose Fruit Rot 
 (Colletotrichum 
 gloeosporoides) 
Botryosphaeria 
Canker 
 (Botryosphaeria spp.) 
Mummyberry 
 (Monilinia vaccinii- 
 corymbosi) 
Phomopsis Stem 
Canker 
 (Phomopsis 
 vaccinii) 
Powdery Mildew 
 (Sphaerotheca spp) 
Septoria Blight 
 (Septoria spp.) 
6.0 - 15.5 
(0.10 - 0.25) 
Begin TETRABAN applications prior to disease development 
and continue on a 7 - to 14 -day schedule, following the 
resistance 
management guidelines. 
 
Applications may be made by ground, air or chemigation. An 
adjuvant may be added at specified rates. 
 
Do not apply more than two sequential applications 
of TETRABAN or other Group 11 fungicides before 
alternation with a fungicide that is not in Group 11. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 42 fl. oz. of product/A/year. 
a. Do not apply more than 0.75 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 2 applications per year at the high rate (15.5 fl . oz./A) or 7 applications per year at the low rate (6.0 fl . 
oz./A). 
5) Pre-Harvest Interval (PHI): TETRABAN may be applied the day of harvest. 
 
 
 
 
 
 
 
 
 
 
 
Crop Target Diseases 
Use Rate 
fl. oz. product/A 
(lb. a.i./A) 
Application Instructions 
Berries, 
Caneberry Subgroup 
13-07A 
 
Blackberry 
Bingleberry 
Boysenberry 
Dewberry 
Lowberry 
Marionberry 
Olallieberry 
Youngberry 
Loganberry 
Red and Black 
Raspberry 
Wild Raspberry 
 
Including all cultivars 
and/or hybrids of 
these. 
Anthracnose 
 (Spaceloma necator) 
 (Elsinoe veneta) 
Botryosphaeria 
Canker 
 (Botryosphaeria 
 dothidea) 
Colletotrichum Rot 
 (Colletotrichum 
 gloeosporioides) 
Leaf Spot 
 (Septoria rubi) 
 (Sphaerulina rubi) 
Powdery Mildew 
 (Sphaerotheca 
 macularis) 
Rosette or Double 
 Blossom of 
 Blackberries 
 (Cercosporella rubi) 
Spur Blight 
 (Didymella applanata) 
6.0 - 15.5 
(0.10-0.25) 
Begin applications at onset of disease and continue 
as required until harvest. Make applications on a 7- 
to 14-day schedule. Use a minimum water volume 
of 10 gallons per acre by ground and a minimum of 
3 gallons by air. 
 
Do not apply more than two sequential applications 
of TETRABAN or other Group 11 fungicides before 
alternation with a fungicide that is not in Group 11.

Page 16 of 49 
Blackerry Rust 
 (Phragmidium spp.) 
10 - 15.5 
 (0.16 - 0.25) 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 90 fl. oz. of product/A/year. 
a. Do not apply more than 1.5 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 5 applications per year at the high rate (15.5 fl. oz./A) or 15 applications per year at the low rate (6.0 fl. 
oz./A). When applying at 10 fl. oz./A, do not apply more than 9 applications per year. 
5) Pre-Harvest Interval (PHI): TETRABAN may be applied the day of harvest. 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Berry, Low Growing 
Subgroup 13-07G 
(except Cranberry) 
 
Strawberry 
 
See additional crops 
below. 
 
Bearberry, Bilberry, 
Cloudberry, Muntries, 
Partridgeberry including all 
cultivars and/or hybrids of 
these. 
 
Anthracnose 
 (Colletotrichum 
 fragariae) 
Leather Rot 
 (Phytophthora 
 cactorum) 
Powdery Mildew 
 (Sphaerotheca 
 macularis) 
 
Suppression of 
Botrytis on the Foliage 
 (Botrytis cinerea) 
6.0 - 15.5 
(0.10 - 0.25) 
Begin TETRABAN applications prior to disease 
development and continue on a 7 - to 10 -day schedule, 
following the resistance management guidelines. 
Applications may be made by ground, air or chemigation. 
An adjuvant may be added at specified rates. 
 
For leather rot control apply 2 applications on a 7 -day 
schedule from late bloom through harvest. 
 
For dip applications at transplanting for commercial berry 
production: For suppression of root and crown rot caused 
by Colletotrichum spp., mix 5-8 fl. oz. of TETRABAN per 100 
gallons of water. Dip plants for 2 -5 minutes. Plant treated 
plants as quickly as possible. Wash transplants to remove 
excess soil prior to dipping. For continued anthracnose 
control, follow with foliar applications beginning 2 -3 weeks 
after transplant. 
 
Do not apply more than two sequential applications of 
TETRABAN or other Group 11 fungicides before alternation 
with a fungicide that is not in Group 11. 
 Soilborne Diseases: 
Seedling Root Rot, Basal 
Stem Rot 
 (Rhizoctonia solani) 
0.40 - 0.80 
fl. oz./1000 row 
feet 
(0.0065- 0.013 
lb. a.i./1000 
row feet) 
For soil borne/seedling disease control, see directions 
and rates under the SOILBORNE/SEEDLING 
DISEASE CONTROL section. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 60 fl. oz. of product/A/year. 
a. Do not apply more than 1.0 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 3 applications per year at the high rate (15.5 fl. oz./A) or 10 applications per year at the low rate 
(6.0 fl. oz./A). 
5) Pre-Harvest Interval (PHI): TETRABAN may be applied the day of harvest. 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions

Page 17 of 49 
Brassica 
Head and Stem 
Subgroup 
 
Broccoli 
Chinese Broccoli 
 (gai ion) 
Brussels Sprouts 
Cabbage 
Chinese Cabbage 
 (napa) 
Chinese Mustard 
 Cabbage (gai choy) 
Cauliflower 
Cavalo Broccolo 
Kohlrabi 
 
Including all cultivars 
and/or hybrids of these 
 
Alternaria Leaf Spot 
 (Alternaria spp.) 
Downy Mildew 
 (Peronospora 
 parasitica) 
Pin Rot 
 (Alternaria spp.) 
6.0 - 15.5 
(0.10 - 0.25) 
Begin TETRABAN applications prior to disease development 
and continue on a 7 - to 14 -day schedule, following the 
resistance management guidelines. Applications may be 
made 
by ground, air or chemigation. An adjuvant may be added at 
specified rates. Use a minimum of 10 gallons of water per 
acre by ground, and minimum of 3 gallons per acre by air. 
 
Do not apply more than two applications of TETRABAN or 
other Group 11 fungicides before alternation with a fungicide 
that is not in Group 11. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 90 fl. oz. of product/A/year. 
a. Do not apply more than 1.5 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 5 applications per year at the high rate (15.5 fl. oz./A) or 15 applications per year at the low rate 
(6.0 fl. oz./A). 
5) Pre-Harvest Interval (PHI): TETRABAN may be applied the day of harvest. 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Brassica 
Leafy Greens 
Subgroup 
 
Broccoli Raab 
Cabbage, Chinese 
Collards 
Kale 
Mizuna 
Mustard Greens 
Mustard Spinach 
Rape Greens 
Including all cultivars 
and/or hybrids of 
these 
Black Spot 
(Alternaria spp.) 
Cercospora Leaf Spot 
(Cercospora spp.) 
White Rust 
(Albugo Candida) 
6.0-15.5 
 (0.10 - 0.25) 
Begin TETRABAN applications prior to disease development 
and continue on a 7 - to 14 -day schedule, following the 
resistance management guidelines. Applications may be 
made by ground, air or chemigation. An adjuvant may be 
added at specified rates. 
 
Do not apply more than one application of TETRABAN or 
other Group 11 fungicides before alternation with a fungicide 
that is not in Group 11. 
Soilborne Diseases 
 
Seedling Root Rot, 
Basal Stem Rot 
 (Rhizoctonia solani) 
0.40-0.80 
fl. oz./1000 
row feet 
(0.0065- 0.013 
lb. a.i./1000 row 
feet) 
For soil borne/seedling disease control, see 
directions and rates under the SOILBORNE/SEEDLING 
DISEASE CONTROL section. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 42 fl. oz. of product/A/year. 
a. Do not apply more than 0.75 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 2 applications per year at the high rate (15.5 fl. oz./A) or 7 applications per year at the low rate 
(6.0 fl. oz./A). 
5) Pre-Harvest Interval (PHI): TETRABAN may be applied the day of harvest. 
 
 
 
 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Bulb Vegetables 
Crop Group 3-07 
 
Garlic 
Foliar Diseases 
Cladosporium Leaf 
Blotch 
(Cladosporium allii) 
6.0 – 12.0 
(0.10 - 0.20) 
For downy mildew, make preventative applications on 
a 5- to 7-day schedule.

Page 18 of 49 
Leek 
Onion, bulb 
Daylily, bulb 
Fritillaria, bulb 
Garlic, bulb 
Garlic, great-headed, bulb 
Garlic, serpent, bulb 
Lily, bulb 
Onion, bulb 
Onion, Chinese, bulb 
Onion, pearl 
Onion, potato, bulb 
Shallot, bulb 
Onion, green 
Chive, fresh leaves 
Chive, Chinese, fresh 
 leaves 
Elegans hosta 
Fritillaria, leaves 
Kurrat 
Lady's leek 
Leek 
Leek, wild 
Onion, beltsville 
bunching 
Onion, fresh 
Onion, green 
Onion, macrostem 
Onion, tree, tops 
Onion, Welsh, tops 
Shallot, fresh leaves 
 
Including all cultivars and/or 
hybrids of these 
 
Purple Blotch 
(Alternaria porri) 
Rust 
(Puccinia allii) 
For all other diseases, begin TETRABAN applications 
prior to disease development and continue every 7-14 
days following the resistance management guidelines. 
Applications may be made by ground, air or 
chemigation. If applications are made by air, the higher 
rates should be used for adequate control. An adjuvant 
may be added at specified rates. 
 
Do not apply more than one application of TETRABAN 
or other Group 11 fungicides before alternation with a 
fungicide that is not in Group 11. 
 
Mixtures of TETRABAN with insecticides and silicone 
adjuvants must be tested for crop safety before 
application to the crop. 
Botrytis Leaf Blight 
(Botrytis aclada) 
Downy Mildew 
(Peronospora 
destructor) 
9.0 - 15.5 
(0.15 - 0.25) 
Soilborne Diseases 
Rhizoctonia Damping-Off 
(Rhizoctonia 
solani) 
0.40 - 0.80 
fl. oz. 
OZ./1000 row 
feet 
(0.0065- 0.013 
lb. a.i./1000 
row feet) 
For soil borne/seedling disease control, see directions 
under the SOILBORNE/SEEDLING DISEASE 
CONTROL section. If the application is an in -furrow 
application, spray just prior to seed placement so that 
the majority of the chemical is under the seed. This will 
reduce the potential for phytotoxicity, especially if 
fertilizer is added to the application. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 5 days (downy mildew); 7 (other foliar diseases) 
3) Maximum Annual Rate: Do not apply more than 90 fl. oz. of product/A/year. 
a. Do not apply more than 1.5 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 5 applications per year at the high rate (15.5 fl. oz./A) or 15 applications per year at the low rate 
(6.0 fl. oz./A). When applying at 9.0 fl. oz./A, do not apply more than 10 applications per year. When applying at 12.0 fl. oz./A, 
do not apply more than 7 applications per year. 
5) Pre-Harvest Interval (PHI): TETRABAN may be applied the day of harvest. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions

Page 19 of 49 
Canola 
(see Oilseed Crops for additional 
information) 
Alternaria Blackspot 
 (Alternaria spp.) 
Blackleg 
 (Leptosphaeria 
 maculans) 
Sclerotica Stem Rot 
 (Sclerotinia 
 sclerotiorum) 
6.0 - 15.5 (0.10 
- 0.25) 
In general, apply 7.0 fl. oz. of TETRABAN at early 
bud followed by 14.0 fl. oz. at about 45 days before 
harvest. A third application of 7.0 fl. oz. may be made 
30 days before harvest. 
 
Specifically, for blackleg, apply TETRABAN at the 2- 
to 4 -leaf stage. For Alternaria or Sclerotinia, apply 
9.0-15.5 fl. oz. product/A at 10 -25% flowering (3 -7 
days following first flower). Use the higher rate under 
heavy disease pressure or when conditions are 
favorable for disease. For control of Alternaria alone, 
8.0 fl. oz. product/A may be applied at pod st age 
(approximately 95% petal fall). 
 
Do not apply more than one application of 
TETRABAN or other Group 11 fungicides before 
alternation with a fungicide that is not in Group 11. 
 
Applications may be made by ground, air or 
chemigation. Use a minimum of 10 gallons of water 
per acre for ground applications. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 14 days 
3) Maximum Annual Rate: Do not apply more than 24 fl. oz. of product/A/year. 
a. Do not apply more than 0.45 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 1 application per year at the high rate (15.5 fl oz/A) or 4 applications per year at the low rate 
(6.0 fl. oz./A). 
5) Pre-Harvest Interval (PHI): Do not apply TETRABAN within 30 days of harvest. 
 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Carrots Early Blight 
 (Cercospora 
carotae) 
Late Blight 
 (Alternaria dauci) 
White Mold 
 (Sclerotium rolfsii) 
 
For additional 
diseases, see 
Vegetables, Root, 
Subgroup. 
9.0 - 20.0 
(0.15 - 0.33) 
Begin TETRABAN applications prior to disease 
development and continue every 7-14 days following 
the resistance management guidelines. 
 
Applications may be made by ground, air or 
chemigation. An adjuvant may be added at specified 
rates. 
 
Do not apply more than one application of 
TETRABAN or other Group 11 fungicides before 
alternation with a fungicide that is not in Group 11. 
Soilborne Diseases 
 
Rhizoctonia Root Rot 
(Rhizoctonia solani) 
0.40 – 0.80 
fFl. oOz./1000 
Row feet 
(0.0065- 0.013 
lb. a.i./1000 
row feet) 
For soil borne/seedling disease control, see 
directions and rates under the 
SOILBORNE/SEEDLING DISEASE CONTROL 
section. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 120 fl. oz. of product/A/year. 
a. Do not apply more than 2.0 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 6 applications per year at the high rate (20.0 fl. oz./A) or 13 applications per year at the low rate 
(9.0 fl. o.z/A). 
5) Pre-Harvest Interval (PHI): TETRABAN may be applied the day of harvest. 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions

Page 20 of 49 
Celery Early Blight 
 (Cercospora apii) 
Late Blight 
 (Septoria apicola) 
 
For additional diseases, 
see Leafy Vegetables. 
9.0 - 15.5 
(0.15 - 0.25) 
Begin TETRABAN applications prior to disease 
development and continue every 7-14 days following 
the resistance management guidelines. Applications 
may be made by ground, air or chemigation. An 
adjuvant may be added at specified rates. 
 
Do not apply more than one application of 
TETRABAN or other Group 11 fungicides before 
alternation with a fungicide that is not in Group 11. 
Soilborne Diseases: 
Rhizoctonia Root Rot 
(Rhizoctonia solani) 
0.40 - 0.80 
fl. oz./1000 
row feet 
(0.0065- 0.013 
lb. a.i./1000 
row feet) 
For soil borne /seedling disease control, see 
directions and rates under the 
SOILBORNE/SEEDLING DISEASE CONTROL 
section. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 90 fl. oz. of product/A/year. 
a. Do not apply more than 1.5 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 5 applications per year at the high rate (15.5 fl. oz./A) or 10 applications per year at the low rate 
(9.0 fl. oz./A). 
5) Pre-Harvest Interval (PHI): TETRABAN may be applied the day of harvest. 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Christmas Trees Diplodia Tip Blight 
 (Diplodia pinea) 
Lophodermium 
Needlecast 
 (Lophodermium 
 pinastri) 
Swiss Needlecast 
 (Phaeocrytopus 
 gaumannii) 
6.0 - 15.5 
(0.10 - 0.25) 
Begin TETRABAN applications prior to disease 
development and continue at 7 - to 21-day intervals 
following the resistance management guidelines. 
Applications may be made by ground, air or 
chemigation. An adjuvant may be added at specified 
rates. 
 
Do not apply more than two sequential applications 
of TETRABAN or other Group 11 fungicides before 
alternation with a fungicide that is not in Group 11. 
Specific Use Restrictions: 
1) 1) Maximum Single Application per Acre: Do not exceed the maximum rate listed in the table. 
2) 2) Minimum Application Interval: 7 days 
3) 3) Maximum Annual Rate: Do not apply more than 120 fl. oz. of product/A/year. 
4) 4) Do not apply more than 2.0 lb. a.i./A/year of azoxystrobin-containing products. 
5) 5) Do not apply more than 7 applications per year at the high rate (15.5 fl. oz./A) or 20 applications per year at the low rate (6.0 
(6.0 fl. oz./A) 
6) 6) Do not apply more than 0.077 Fl. oz. Tetraban (0.00125 lb. ai)/gallon per application.

Page 21 of 49 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Citrus Fruit 
Crop Group 10-10 
 
Calamondin 
Citron 
Grapefruit 
Kumquat 
Lemon 
Lime 
Mandarin 
Orange (sour and 
sweet) 
Pummelo 
Satsuma Mandarin 
Tangerine 
 
Including all cultivars 
and/or hybrids of 
these 
 
See complete list of 
citrus fruit crops 
below. 
Albinism 
 (Alternaria alternata 
 pv citri) 
Alternaria Leaf and 
Fruit Spot 
 (Alternaria citri) 
Cercospora Leaf Spot 
 (Cercospora spp.) 
Diplodia Stem-End 
Rot 
 (Diplodia natalensis) 
Greasy Spot 
 (Mycosphaerella 
 citri) 
Melanose 
 (Diaporthe citri) 
Penicillium Decays 
Green Mold, 
Whisker Mold, 
Suppression of 
Blue Mold 
 (Penicillium spp.) 
Phomopsis Stem-End 
Rot 
 (Phomopsis citrii) 
Post Bloom Fruit 
Drop (PFD) 
 (Colletotrichum 
 acutatum) 
Powdery Mildew 
 (Erysiphe spp.) 
Scab 
 (Elsinoe fawcettii) 
Sweet Orange Scab 
 (Elsinoe australis) 
12.0 - 15.5 
(0.20 - 0.25) 
Begin TETRABAN applications prior to disease development 
and continue on 7 - to 21 -day intervals following the 
resistance management guidelines. Under conditions that 
favor severe disease epidemics, use the higher application 
rates. Applications maybe made by ground, air or 
chemigation. An adjuvantmay be added at specified rates. A 
horticulturalspray oil should be used to improve control of 
greasy spot. 
 
Do not apply more than two sequential applications of 
TETRABAN or other Group 11 fungicides before alternation 
with a fungicide that is not in Group 11. 
 
Black Spot 
(Guidnardia 
citricarpa) 
9.0 - 15.5 
(0.15 - 0.25) 
Pummelo 
Citrus Hybrid 
(Uniq fruit only) 
 
Soilborne Diseases 
Seedling Root Rot, 
Basal Stem Rot 
 (Rhizoctonia solani) 
0.40 - 0.80 fl. 
oz./1000 
row feet 
(0.0065- 0.013 
lb. a.i./1000 
row feet) 
For soil borne/seedling disease control, see 
directions and rates under the SOILBORNE/SEEDLING 
DISEASE CONTROL section. 
Complete List of Citrus Fruit Crops: Australian Desert Lime (Eremocitrus glauca); Australian Finger Lime (Microcitrus australasica); 
Australian Round Lime (Microcitrus australis); Brown River Finger Lime (Microcitrus papuana); Calamondin (Citrofortunella 
microcarpa); Citron (Citrus medica); Citrus Hybrids, Citrus spp., Eremocitrus spp., Fortunella spp., Microcitrus spp., and Poncirus 
spp.; Grapefruit (Citrus paradise); Japanese Summer Grapefruit (Citrus natsudaidai); Kumquat (Fortunella spp ); Lemon (Citrus 
limon); Lime (Citrus aurantiifolia); Mediterranean Mandarin (Citrus deliciosa); Mount White Lime (Microcitrus garrowayae); New 
Guinea Wild Lime (Microcitrus warburgiana); Orange, Sour (Citrus aurantium); Orange, Sweet (Citrus sinensis); Pummelo (Citrus 
maxima); Russell River Lime (Microcitrus inodora); Satsuma Mandarin (Citrus unshiu); Sweet Lime (Citrus limetta); Tachibana 
Orange (Citrus tachibana); Tahiti Lime (Citrus latifolia); Tangelo (Citrus x tangelo); Tangerine (Mandarin) (Citrus reticulate); Tangor 
(Citrus nobilis); Trifoliate Orange (Poncirus trifoliate); Uniq Fruit (Citrus aurantium Tangelo group); cultivars, varieties and/or hybrids 
of these. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 92.3 fl. oz. of product/A/year. 
a. Do not apply more than 1.5 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not make more than four (4) foliar applications of TETRABAN or other Group 11 fungicide per season year. 
5) Pre-Harvest Interval (PHI): TETRABAN may be applied the day of harvest.

Page 22 of 49 
Clover (and stands containing Clover) 
(See Nongrass Animal Feeds Forage, Fodder, Straw and Hay) 
 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Corn 
Field 
Pop 
Sweet (Includes Seed 
Production) 
Rust 
 (Puccinia sorghi) 
6.0 - 9.0 
(0.10 - 0.15) 
For gray leaf spot, apply TETRABAN at the onset of disease. 
A second application may be required 14 days later if 
disease pressure persists. 
 
For all other diseases, begin TETRABAN applications 
prior to disease development. Applications may be 
continued every 7 -14 days following the resistance 
management guidelines. Applications may be made by 
ground, air or chemigation. An adjuvant may be ad ded at 
specified rates. 
 
Do not apply more than two sequential applications of 
TETRABAN or other Group 11 fungicides before alternation 
with a fungicide that is not in Group 11. 
Anthracnose Leaf Blight 
 (Colletotrichum 
 graminicola) 
Eye Spot 
 (Aureobasidium zeae) 
Gray Leaf Spot 
 (Cercospora 
 sorghi) 
Northern Corn Leaf Blight 
 (Setosphaeria 
 turcica) 
Northern Corn Leaf Spot 
 (Cochliobolus 
 carbonum) 
Southern Corn Leaf 
Blight 
 (Cochliobolus 
 heterostrophus) 
6.0 - 15.5 
(0.10 - 0.25) 
Early Application 
(V4 - V8) 
6.0 
(0.10) 
TETRABAN may be applied early (V4 - V8) for early season 
disease control and beneficial physiological benefits. If 
mixing with herbicides, other than solo glyphosate products, 
Callisto®, Callisto® Xtra, or Halex® GT, consult your local 
Winfield Solutions, LLC representative. 
Soilborne Diseases 
 
Rhizoctonia Root and 
Stalk Rot 
 (Rhizoctonia solani) 
0.40 - 0.80 
fl. oz./1000 
row feet 
(0.0065- 0.013 
lb. a.i./1000 
row feet) 
For soil borne/seedling disease control; see directions 
and rates under the SOILBORNE/SEEDLING 
DISEASE CONTROL section. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 120 fl. oz. of product/A/year. 
a. Do not apply more than 2.0 lb. a.i./A/year of azoxystrobin-containing products. 
4) For Popcorn and Sweet corn, do not apply more than 7 applications per year at the high rate (15.5 fl. oz./A) or 20 applications 
per year at the low rate (6.0 fl. oz./A). When applying at 9.0 fl. oz./A, do not apply more than 13 applications per year. 
5) For Field Corn and Field Corn Grown for Seed, do not make more than two (2) foliar applications per year. 
6) Pre-Harvest Interval (PHI): Do not apply within 7 days of harvest

Page 23 of 49 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Cotton Anthracnose 
 (Glomerella 
 gossypii) 
Ascochyta Blight 
 (A. gossypii) 
Boll Rot 
 (A. gossypii) 
Cotton Rust 
 (Puccinia 
 schedonnardi) 
Hardlock 
 (Fusarium 
 verticillioides) 
Southwestern Cotton Rust 
 (Puccinia cacabata) 
6.0 - 9.0 
(0.1 - 0.15) 
For optimum disease control, begin TETRABAN 
applications prior to or in the early stages of disease 
development. Applications may be made by ground, air, or 
chemigation. An adjuvant may be added at specified rates. 
Minimum application volumes for air and ground are 5 and 
10 gallons per acre, respectively. 
 
Target the first TETRABAN application approximately at 
pinhead square to first bloom to protect the plant from 
diseases. Subsequent application(s) are specified on a 14 - 
to 21-day schedule. An additional application may be made 
depending on environmental conditions and the health of the 
cotton plant. 
 
Under poor environmental conditions conducive to seedling 
disease and poor cotton growth, TETRABAN may be 
applied to early season cotton to suppress damping off and 
other diseases which result in plant stand loss. 
 
Do not apply more than two foliar applications of 
TETRABAN or other Group 11 fungicides before alternating 
with a fungicide that has a different mode of action. 
 Pythium Seedling Blight 
 (Pythium 
 aphanidermatum) 
Rhizoctonia Seedling 
Blight 
 (Rhizoctonia solani) 
In-Furrow 
0.40 - 0.80 
fl. oz. product 
per 1000 row 
feet 
 
(0.0065- 
0.013 lb. 
a.i./1000 row 
feet) 
TETRABAN Application Directions: 
Apply TETRABAN as an in -furrow spray in 3 -7 gallons of 
water at planting. Mount the spray nozzle so the spray is 
directed into the furrow just before the seed are covered. Use 
the higher rate when the weather conditions are expected to 
be conducive for disease developme nt, if the field has a 
history of Pythium problems, or if minimum/low till programs 
are in place. 
 
See the SOILBORNE/SEEDLING DISEASE CONTROL 
section for table illustrating total fluid ounces per acre with 
various row spacings. 
 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 14 days 
3) Maximum Annual Rate: Do not apply more than 27 fl. oz. of product//year as a foliar spray. 
4) Do not make more than three (3) foliar applications of TETRABAN or other Group 11 fungicides per crop per acre per year. 
5) Pre-Harvest Interval (PHI): Do not apply TETRABAN within 45 days of harvest.

Page 24 of 49 
Crop Target Diseases 
Use Rate Fl. 
oz. 
product/A 
(lb. a.i./A 
Application Instructions 
Cranberry 
Subgroup 13-07H 
(except Strawberry) 
 
Bearberry 
Bilberry 
Blueberry, Lowbush 
Cloudberry 
Lingonberry 
Muntries 
Partridgeberry 
 
Including all cultivars 
and/or hybrids of 
these 
Cottonball 
 (Monilinia oxycocci) 
Fruit Rots 
 (Physalospora 
 vaccinii) 
 (Glomerella 
 cingulata) 
 (Coleophoma 
 empetri) 
Lophodermium Twig 
Blight 
 (Lophodermium 
 spp.) 
6.0 - 15.5 
(0.10 - 0.25) 
Begin applications at 5 -10% bloom for fruit rot, cottonball, 
and twig blight. Continue applications on a 7 - to 14 -day 
schedule if conditions are favorable for disease 
development. Applications may be made by ground, 
chemigation or air. 
 
Do not apply more than two sequential applications of 
TETRABAN or other Group 11 fungicides before alternation 
with a fungicide that is not in Group 11. 
Fairy Ring (suppression) 
(Psilocybe spp.) 
15.5 
(0.25) 
Make the first application at bud break. Measure the ring 
diameter and add 10 feet to that diameter. Apply TETRABAN 
at a rate equivalent to 15.5 fl. oz./A in 30-100 gallons of water 
to the affected area. Irrigation (1 - 2 hours) following 
application is advisable to ensure penetration to the base of 
the plant. If necessary , make another application 2 - 4 
weeks later. For ground application ensure adequate water 
volume for thorough canopy penetration. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 90 fl. oz. of product/A/year. 
a. Do not apply more than 1.5 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 5 applications per year at the high rate (15.5 fl. oz./A) or 15 applications per year at the low rate 
(6.0 fl. oz./A). 
5) Do not treat cranberry fields used for aquaculture of fish and crustacea. 
6) Do not apply when weather conditions favor drift from treated areas to non-target aquatic habitat. Use care in making 
applications near non-target aquatic habitats. 
7) Do not apply to flooded crop. 
8) Do not allow release of irrigation or flood water to non-target aquatic habitat for at least 14 days after the last application. 
9) Pre-Harvest Interval (PHI): Do not apply TETRABAN within 3 days of harvest.

Page 25 of 49 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Remarks Application Instructions 
Cucurbits 
 
Cantaloupe 
Chayote 
Chinese-Waxgourd 
Cucumber 
Gourds 
Honeydew 
Melons 
Momordica spp. 
(bitter melon, 
balsam apple) 
Muskmelon 
Watermelon 
Pumpkin 
Squash 
Zucchini 
 
Including cultivars 
and/or hybrids of these 
Anthracnose 
 (Colletotrichum 
 Lagenarium) 
Belly Rot 
 (Rhizoctonia solani) 
Downy Mildew 
 (Pseudoperonospora 
 cubensis) 
Gummy Stem Blight 
 (Didymella bryoniae) 
Leaf Spots 
 (Alternaria spp., 
 Cercospora spp.) 
Myrothecium Canker 
 (Myrothecium 
 roridum) 
Plectosporium Blight 
 (Plectosporium 
 tabacinum) 
Powdery Mildew 
 (Sphaerotheca 
 fuliginea, 
 Erysiphe 
 cichoracearum) 
Ulocladium Leaf Spot 
 (Ulocladium 
 cucurbitae) 
6.0 - 15.5 
(0.10 - 0.25) 
For both downy and powdery mildew, make preventative 
applications on a 5- to 7-day schedule. 
For belly rot control, make the first application at the 1-3 leaf 
crop stage with a second application just prior to vine tip 
over or 10-14 days later whichever occurs first. For all other 
diseases, begin TETRABAN applications prior to disease 
development and continue every 7 -14 days following the 
resistance management guidelines. Applications may be 
made by ground, air or chemigation. An adjuvant may be 
added at specified rates. 
 
Do not tank mix TETRABAN with crop oil concentrates 
(COC), methylated spray oil (MSO) or silicon 
adjuvants. 
 
Do not tank mix TETRABAN with malathion, dicofol, 
methomyl, potassium salts of fatty acids, 
or dicloran. 
 
Do not apply more than one application of TETRABAN or 
other Group 11 fungicides before alternation with a 
fungicide that is not in Group 11. 
 
Soilborne Diseases 
Rhizoctonia Root Rot 
(Rhizoctonia solani) 
0.40-0.80 
fl. oz. 
OZ./1000 
row feet 
(0.0065- 0.013 
lb. a.i./1000 
row feet) 
For soil borne/seedling disease control, see 
directions and rates under the SOILBORNE/SEEDLING 
DISEASE CONTROL section. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: Downy and Powdery mildew 5 days , other diseases 7 days. 
3) Maximum Annual Rate: Do not apply more than 92.3 fl. oz. of product/A/year. 
a. Do not apply more than 1.5 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not make more than four (4) foliar applications of TETRABAN or other Group 11 fungicides per crop per acre per year. 
5) Pre-Harvest Interval (PHI): Do not apply within 1 day of harvest.

Page 26 of 49 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Fruiting Vegetables Crop 
Group 8-10 
 
Pepper 
Bell Pepper 
Non-Bell Pepper 
Sweet Non-Bell 
Pepper 
 
Eggplant 
Okra 
Pepino 
 
Including all cultivars 
and/or hybrids of these. 
 
See specific directions for 
use for Tomatoes. 
See complete list of 
fruiting vegetables below. 
Anthracnose 
 (Colletotrichum spp.) 
Powdery Mildew 
 (Sphaerotheca 
 spp.) 
6.0 - 15.5 
(0.10 - 0.25) 
Begin TETRABAN applications prior to disease 
development and continue on a 7 - to 14 -day schedule, 
following the resistance management guidelines. 
Applications may be made by ground, air or chemigation. An 
adjuvant may be added at specified rates. 
 
Do not apply more than one application of TETRABAN or 
other Group 11 fungicides before alternation with a 
fungicide that is not in Group 11. 
Soilborne Diseases 
Rhizoctonia Seedling Rot 
 (Rhizoctonia solani) 
0.40 - 0.80 
fl. oz./1000 
row feet 
(0.0065- 0.013 
lb. a.i./1000 
row feet) 
For soil borne/seedling disease control, see directions 
and rates under the SOILBORNE/SEEDLING 
DISEASE CONTROL section. 
Complete List of Fruiting Vegetables: African Eggplant; Bell Pepper; Eggplant; Martynia; Nonbell Pepper; Okra; Pea Eggplant; 
Pepino; Roselle; Scarlet Eggplant; cultivars, varieties; and/or hybrids of these. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 60 fl. oz. of product/A/year. 
a. Do not apply more than 1.0 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 3 applications per year at the high rate (15.5 fl. oz./A) or 10 applications per year at the low rate 
(6.0 fl. oz./A). 
5) Pre-Harvest Interval (PHI): TETRABAN may be applied the day of harvest. 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Grapes and Other Small 
Fruit Vine Climbing 
Subgroup 13-07F 
(except fuzzy kiwifruit) 
 
Amur River Grape 
Kiwifruit, 
Hardy Maypop 
Muscadines 
Schisandra Berry 
 
Including all cultivars 
and/or hybrids of these 
Black Rot 
 (Guignardia 
 bidwellii) 
Downy Mildew 
 (Plasmopara 
 viticola) 
Phomopsis Cane and 
Leaf Spot 
 (Phomopsis viticola) 
Powdery Mildew 
 (Uncinula necator) 
 
Suppression Only: 
Botrytis Bunch Rot 
 (Botrytis cinerea) 
10.0 - 15.5 
(0.16 - 0.25) 
 
Begin TETRABAN applications prior to disease 
development and continue every 10 -14 days following the 
resistance management guidelines. Applications may be 
made by ground, air or chemigation. An adjuvant may be 
added at specified rates. 
 
Do not apply more than two sequential foliar applications of 
TETRABAN or other Group 11 fungicides before alternating 
with a fungicide that is not in Group 11. 
 
ATTENTION 
TETRABAN is extremely phytotoxic to certain apple 
varieties. 
 
AVOID SPRAY DRIFT. Extreme care must be used to 
prevent injury to apple trees (and apple fruit). 
 
DO NOT spray TETRABAN where spray drift may reach 
apple trees. 
 
DO NOT use spray equipment which has been previously 
used to apply TETRABAN to spray apple trees. Even trace 
amounts can cause unacceptable phytotoxicity to certain 
apple and crabapple varieties. 
 
AVOIDING SPRAY DRIFT IS THE RESPONSIBILITY OF 
THE APPLICATOR. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 10 days 
3) Maximum Annual Rate: Do not apply more than 90 fl. oz. of product/A/year. 
a. Do not apply more than 1.5 lb. a.i./A/year of azoxystrobin-containing products.

Page 27 of 49 
4) Do not apply more than 5 applications per year at the high rate (15.5 fl. oz./A) or 9 applications per year at the low rate 
(10.0 fl. oz./A). 
5) Pre-Harvest Interval (PHI): Do not apply TETRABAN within 14 days of harvest. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Grasses 
(grown for seed) 
Ergot Stem Diseases 
Powdery Mildew 
 (Erysiphe graminis) 
Rust 
 (Puccinia spp.) 
6.0 - 15.5 
(0.10 - 0.25) 
Begin TETRABAN applications prior to disease 
development and continue on a 10 - to 14 -day 
schedule, following the resistance management 
guidelines. Applications may be made by ground, air 
or chemigation. An adjuvant may be added at 
specified rates. 
 
Do not apply more than two sequential applications 
of TETRABAN or other Group 11 fungicides before 
alternation with a fungicide that is not Group 11. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 10 days 
3) Maximum Annual Rate: Do not apply more than 48 fl. oz. of product/A/year. 
a. Do not apply more than 0.8 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 3 applications per year at the high rate (15.5 fl. oz./A) or 8 applications per year at the low rate 
(6.0 fl. oz./A). 
5) Pre-Harvest Interval (PHI): Do not apply TETRABAN within 8 days prior to harvest (swathing).

Page 28 of 49 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Herbs & Spices (except 
black pepper) 
Crop Group 19 
 
Allspice; Angelica; Anise 
(seed); Anise, star; Annatto; 
Balm; Basil; Borage; Burnet; 
Camomile;. Caper (buds); 
Caraway; Caraway, Black; 
Cardamon; Cassia (buds); 
Catnip; Celery Seed; Chervil 
(dried); Chive; Chive, 
Chinese; Cinnamon; Clary; 
Clove (buds); Coriander 
(cilantro or Chinese parsley) 
(leaf); Coriander (seed); 
Costmary; Culantro (leaf and 
seed); Cumin; Curry (leaf); Dill 
(seed); Dillweed; Fennel, 
Common; Fennel, Florence 
(seed); Fenugreek; Grains of 
Paradise; Horehound; 
Hyssop; Juniper berry; 
Lavender; Lemongrass; 
Lovage (leaf and seed); Mace; 
Marigold; Marjoram; Mustard 
(seed), Nasturtium; Nutmeg; 
Parsley (dried); Pennyroyal; 
Pepper, White; Poppy Seed; 
Rosemary; Rue; Saffron; 
Sage; Savory, Summer and 
Wnter Sweet Bay; Tansy; 
Tarragon; Thyme; Vanilla; 
Wintergreen; Woodruff; 
Wormwood 
Corynespora Blight 
 (Corynespora 
 cassiicola) 
Dill Blight 
 (Cercosporidium 
 punctum) 
Phoma Blight 
 (Passalora puncta) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
6.0 - 15.5 
(0.10 - 0.25) 
 
Begin TETRABAN applications at the onset of disease 
development and continue on a 7-day schedule, following 
the resistance management guidelines. Applications may 
be made by ground only. An adjuvant may be added at 
specified rates. Use a minimum of 30 gallons of water per 
acre. 
 
Do not apply more than two sequential applications of 
TETRABAN or other Group 11 fungicides before alternation 
with a fungicide that is not in Group 11. 
 
Wasabi Fusarium Rhizome 
and Root Rot 
 (Pythium spp.) 
6.0 - 15.5 
(0.10 - 0.25) 
Begin TETRABAN a pplications at the onset of disease 
development and continue on a 7 -day schedule, following 
the resistance management guidelines. 
 
Applications may be made by ground or through the 
irrigation system (chemigation). An adjuvant may be 
added at specified rates. Use a minimum of 30 gallons of 
water per acre. 
 
Do not apply more than two sequential applications of 
TETRABAN or other Group 11 fungicides before alternation 
with fungicide that is not in Group 11 . 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 90 fl. oz. of product/A/year. 
a. Do not apply more than 1.5 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 5 applications per year at the high rate (15.5 fl. oz./A) or 15 applications per year at the low rate 
(6.0 fl. oz./A). 
5) Pre-Harvest Interval (PHI): TETRABAN may be applied the day of harvest.

Page 29 of 49 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Leafy Vegetables 
(except brassica) 
 
Amaranth 
Arugula 
Cardoon 
Celery 
Celtuce 
Chervil 
Chrysanthemum, 
 Edible 
Corn Salad Cress 
Dandelion 
Dock 
Endive 
Fennel 
Lettuce, Head and 
 Leaf 
Orach 
Parsley 
Purslane 
Radicchio 
Rhubarb 
Spinach 
Swiss Chard 
 
Including cultivars and/or 
hybrids of these 
Foliar Diseases 
 
Alternaria Leaf Spot 
 (Alternaria sonchi, 
 A. spp.) 
Anthracnose 
 (Microdochium 
 panattonianum, 
 Colletotrichum 
 dematium) 
Cercospora Leaf Spot 
 (Cercospora spp.) 
Septoria Leaf Spot 
 (Septoria 
 petroselini) 
White Rust 
 (Albugo occidentalis) 
6.0 - 15.5 
(0.10 - 0.25) 
For both downy and powdery mildew, make preventative 
applications on a 5- to 7-day schedule. 
 
For all other diseases, begin TETRABAN applications prior 
to disease development and continue every 7 -14 days 
following the resistance management guidelines. 
Applications may be made by ground, air or chemigation. 
An adjuvant may be added at specified rates. 
 
Do not apply more than one application of TETRABAN or 
other Group 11 fungicides before alternation with a 
fungicide that is not in Group 11. 
 
ATTENTION: Applications of TETRABAN to leafy 
vegetable foliage have contributed to phytotoxicity under 
certain circumstances. Proceed with caution with regard to 
tank mixes and adjuvants when treating all leafy vegetables 
with TETRABAN. TETRABAN must not be tank mixed on 
leaf lettuce with permethrin, Aluminum tris , lambda -
cyhalothrin or another product that may increase the 
penetration of TETRABAN into the leaf surface, including 
silicone wetters. 
Downy Mildew 
 (Bremia lactucae) 
Powdery Mildew 
 (Eyrisiph 
cichoracearum) 
12.0 - 15.5 
(0.20 - 0.25) 
Soilborne Diseases 
Webb Blight, 
Bottom Rot, 
Crater Rot, 
Root Rot 
 (Rhizoctonia solani) 
0.40 - 0.80 
fl. oz./1000 
row feet 
(0.0065- 0.013 
lb. a.i./1000 
row feet) 
For soil borne/seedling disease control, see directions and 
rates under the SOILBORNE/SEEDLING DISEASE 
CONTROL 
section. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 5 days (downy brome, powdery mildew); 7-days (other diseases) 
3) Maximum Annual Rate: Do not apply more than 90 fl oz of product/A/year. 
a. Do not apply more than 1.5 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 5 applications per year at the high rate (15.5 fl. oz./A) or 15 applications per year at the low rate 
(6.0 fl. oz./A). When applying at 12.0 fl. oz./A, do not apply more than 7 applications per year. 
5) Pre-Harvest Interval (PHI): TETRABAN may be applied the day of harvest.

Page 30 of 49 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Legume Vegetables, Dry and 
Succulent and Legume 
Vegetables, Foliage of any 
Cultivar of Bean (Phaseolus 
spp.) and Field Pea [Pisum 
spp.) 
 
Bean (Lupinus spp.) 
(includes grain lupin, sweet 
lupin, white lupin, and white 
sweet lupin) 
Bean (Phaseolus spp.) 
(includes field bean, kidney 
bean, lima bean, navy 
bean, pinto bean, runner 
bean, snap bean, tepary 
bean, wax bean) 
Bean (Vigna spp.) 
(includes adzuki bean, 
asparagus bean, blackeyed 
pea, cowpea, catjang, 
Chinese longbean, crowder 
pea, moth bean, mung 
bean, rice bean, southern 
pea, urd bean, yardlong 
bean) 
Bean (Glycine max) 
Soybean, Immature Seed 
(edamame) 
Broad bean (fava bean) 
 (Vicia faba) 
Chickpea (garbanzo bean) 
(Cicer arietinum) 
Guar (Cyamopsis 
tetragonoloba) 
Jackbean 
 (Canavalia ensiformis) 
Lablab Bean (hyacinth bean) 
 (Lablab purpureus) 
Lentil (Lens esculenta) 
Pea (Pisum spp.) 
(includes dwarf pea, edible-
pod pea, English pea, 
garden pea, green pea, 
field pea, snow pea, sugar 
snap pea) 
Pigeon Pea (Cajanus cajan) 
Sword Bean 
 (Canavalia gladiata) 
Bean Rust 
 (Uromyces 
 appendiculatus) 
 
6.0 
(0.10) 
Begin TETRABAN applications prior to disease 
development and continue every 7 -14 days following 
the resistance management guidelines. Use the 
higher rates under severe disease pressure. 
Applications may be made by ground, air or 
chemigation. An adjuvant may be added at specified 
rates. For rust, use a non-ionic surfactant. 
 
Do not apply more than two sequential applications of 
TETRABAN or other Group 11 fungicides before 
alternation with a fungicide that is not in Group 11. 
Alternaria Blight 
 (Alternaria spp.) 
Alternaria Leaf Spot 
 (Alternaria alternata) 
Anthracnose 
 (Colletotrichum 
 lindemuthianum) 
Ascochyta Blight 
 (Mycosphaerella 
 pinodes) 
Ascochyta Leaf and Pod 
 Spot (Ascochyta spp.) 
Ascochyta Leaf Spot 
 (Ascochyta 
 phaseolorum) 
Rust 
 (Phakopsora spp.) 
Southern Blight 
 (Sclerotium rolfsii) 
Web Blight 
 (Rhizoctonia solani) 
6.0 - 15.5 
(0.10 - 0.25) 
Soilborne Diseases 
Rhizoctonia Root Rot 
(Rhizoctonia solani) 
0.40 - 0.80 fl. 
oz./1000 row 
feet 
(0.0065- 0.013 
lb. a.i./1000 
row feet) 
For soil borne/seedling disease control, see directions 
and rates under the SOILBORNE/SEEDLING 
DISEASE CONTROL section. 
 
TETRABAN can be applied to the furrow and covering 
soil at planting time in a 7 -inch band. Avoid a 
concentrated stream directly on the seed or delayed 
emergence may occur. 
 
If using a narrow spray as an in -furrow spray, adjust 
the spray stream to hit the soil next to the seed but not 
hit the seed. 
 
NOTE: Conduct a seed safety test with your crop 
before making in-furrow applications. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 90 fl oz of product/A/year. 
a. Do not apply more than 1.5 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 5 applications per year at the high rate (15.5 fl. oz./A) or 15 applications per year at the low rate 
(6.0 fl. oz./A). 
5) Pre-Harvest Interval (PHI): 
a. Do not apply TETRABAN within 14 days of harvest of dry legume vegetables (dry bean and dry pea seeds). 
b. TETRABAN may be applied the day of harvest for succulent beans and peas. 
6) For use on soybeans, please refer to the soybean crop directions for use.

Page 31 of 49 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Mint 
 
(Fresh or for processing 
into mint oil) 
Powdery mildew 
 (Erysiphe spp.) 
Rust 
 (Puccinia menthae) 
6.0 - 15.5 
(0.10 - 0.25) 
Begin TETRABAN applications prior to disease 
development and continue on a 7 - to 10 -day schedule, 
following the resistance management guidelines. 
Applications may be made by ground, air or chemigation. 
An adjuvant may be added at specified rates. 
 
Do not apply more than two sequential applications of 
TETRABAN or other Group 11 fungicides before 
alternation with a fungicide that is not in Group 11. 
Soilborne Diseases 
Seedling Root Rot, 
Basal Stem Rot 
 (Rhizoctonia solani) 
0.40 - 0.80 
fl. oz./1000 
row feet 
(0.0065- 0.013 
lb. a.i./1000 
row feet) 
For soil borne/seedling disease control, see directions and 
rates under the SOILBORNE/SEEDLING DISEASE 
CONTROL 
section. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 42 fl. oz. of product/A/year. 
a. Do not apply more than 0.75 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 2 applications per year at the high rate (15.5 fl. oz./A) or 7 applications per year at the low rate 
(6.0 fl. oz./A). 
5) Pre-Harvest Interval (PHI): 
a. For processed mint, do not apply TETRABAN within 7 days of harvest. 
b. For fresh mint, TETRABAN may be applied the day of harvest. 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Nongrass Animal Feeds 
Forage, Fodder, Straw 
and Hay 
 
For pure/mixed stands of 
the following or stands 
mixed with grasses: 
 
Alfalfa (Medicago sativa 
 subsp. sativa) 
Bean, Velvet 
 (Mucuna pruriens var. 
 utilis) 
Clover 
 (Trifolium spp., 
 Melilotus spp.) 
Kudzu (Pueraria lobata) 
Lespedeza 
 (Lespedeza spp.) 
Lupin (Lupinus spp.) 
Sainfoin (Onobrychis 
 viciifolia) 
Trefoil (Lotus spp.) 
Vetch (Vicia spp.) 
Vetch, Crown 
 (Coronilla varia) 
Vetch, Milk 
 (Astragalus spp.) 
Alternaria Leaf Spot 
 (Alternaria spp.) 
Cercospora Leaf Spot 
 (Cercospora spp.) 
Downy Mildew 
 (Peronospora spp.) 
Powdery Mildew 
 (Oidium spp., 
 Erysiphe spp.) 
Rust 
 (Phakopsora spp.) 
6.0 - 15.5 
(0.10 - 0.25) 
 
Begin TETRABAN applications prior to disease development 
and continue , following the resistance management 
guidelines. 
 
Use the higher rates under severe disease pressure. 
Applications may be made by ground, air or chemigation. For 
best results, use an additive such as a crop oil concentrate 
or a non-ionic surfactant at specified label rates. 
 
For management of outbreaks of Asian soybean rust and 
other Puccinia species on alternate host species such as 
kudzu, lespedeza, trefoil and vetch, apply TETRABAN to 
forages grown in the vicinity of soybeans and other legume 
crops (beans and peas) as a part of an Asian rust disease 
management strategy. 
 
Consult with local experts and university extension agents 
for the latest advice. 
 
Do not apply more than three sequential applications of 
TETRABAN or other Group 11 fungicides before alternation 
with a fungicide that is not in Group 11. 
 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Do not apply more than 0.25 lb. a.i./A per cutting. 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: Do not apply more than 42 fl. oz. of product/A/year. 
a. Do not apply more than 0.75 lb. a.i./A/year of azoxystrobin-containing products.

Page 32 of 49 
5) Do not apply more than 2 applications per year at the high rate (15.5 fl oz/A) or 7 applications per year at the low rate 
(6.0 fl oz/A). 
6) Pre-Harvest Interval (PHI): Do not apply TETRABAN within 14 days of grazing or harvest for forage and hay. 
7) Not for use on rangeland. 
 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Oilseed Crops 
Crop Group 20 
 
Crambe 
Flax 
Mustard, Indian 
Mustard, Field 
Mustard, Black 
Rapeseed 
Rapeseed, Indian 
Safflower 
Sunflower 
 
Including all cultivars 
and/or hybrids of these 
 
See complete list of 
oilseed crops below 
Alternaria Leaf Spot 
 (Alternaria spp.) 
Downy Mildew 
 (Plasmopora 
 halstedii, Plasmopora 
 helianthi) 
Pasmo 
 (Septoria linicola 
 garass) 
Sunflower Rust 
 (Puccinia helianthi) 
6.0 - 15.5 
(0.10 - 0.25) 
 
Apply 6.0 fl. oz. of TETRABAN at early bud followed by 14.0 
fl. oz. at about 45 days before harvest. A third application of 
7.0 fl. oz. may be made 30 days before harvest. Applications 
may be made by ground, air or chemigation. Use a minimum 
of 10 gallons of water per acre for ground applications. 
 
Do not apply more than two sequential applications of 
TETRABAN or other Group 11 fungicides before alternation 
with a fungicide that is not in Group 11. 
Complete List of Oilseed Crops: Borage; Calendula; Castor Oil Plant; Chinese Tallowtree; Cottonseed; Crambe; Cuphea; Echium; 
Euphorbia; Evening Primrose; Flax Seed; Gold of Pleasure; Hare's Ear Mustard; Jojoba; Lesquerella; Lunaria; Meadowfoam; 
Milkweed; Mustard Seed; Niger Seed; Oil Radish; Poppy Seed; Rapeseed; Rose Hip; Safflower; Sesame; Stokes Aster; Sunflower; 
Sweet Rocket; Tallowwood; Tea Oil Plant; Vernonia; cultivars, varieties, and/or hybrids of these. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 14 days 
3) Maximum Annual Rate: Do not apply more than 27 fl. oz. of product/A/year. 
a. Do not apply more than 0.45 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 3 applications of product per year, following the Application Instructions. 
5) Pre-Harvest Interval (PHI): Do not apply TETRABAN within 30 days of harvest. 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Peanuts Soilborne Diseases - early 
season (in-furrow application) 
 
Aspergillus Crown Rot 
 (Aspergillus niger) 
Pythium Damping Off 
 (Pythium spp.) 
Stem Rot/White Mold 
Suppression 
 (Sclerotium rolfsii) 
0.40 - 0.80 
fl. oz./1000 
row feet 
(0.0065- 0.013 
lb. a.i./1000 
row feet) 
Apply TETRABAN in-furrow at planting for control of 
various seed/seedling diseases including early season 
suppression of stem rot. See directions and rates 
under PRODUCT INFORMATION section. 
Soilborne Diseases - mid-late 
season 
 
Rhizoctonia Peg and Pod Rot 
 (Rhizoctonia solani) 
Stem Rot/White Mold 
 (Sclerotium rolfsii) 
 
Suppression Only: 
Cylindrocladium Black Rot 
 (Cylindocladium crotalariae) 
Pythium Pod Rot 
 (Pythium myriotylum) 
12.0 - 24.5 
(0.20 - 0.40) 
Apply TETRABAN approximately 60 and 90 days after 
planting as a foliar application. This application regime may 
be applied earlier if environmental conditions favor disease 
development. These two applications of TETRABAN will 
provide protection against the soil borne diseases and will 
also provide control of the foliar diseases listed for a 10- to 
14-day period after each spray. Under heavy disease 
pressure and/or where there is high rainfall and/or 
irrigation, use 18.5-24.5 fl. oz./A. For light disease pressure 
and dry environmental conditions (non -irrigated, low 
rainfall), use 12.0 -24.5 fl. oz./A. For control of Pythium, a 
rate of 24.5 fl. oz./A is required. Additional applications of 
other fungicides on a leaf spot application schedule will be 
required to provide year long disease control of the leaf

Page 33 of 49 
spot diseases. Applications may be made by ground, air or 
chemigation. An adjuvant may be added at specified rates. 
Foliar Diseases 
 
Early Leaf Spot 
 (Cercospora arachidicola) 
Late Leaf Spot 
 (Cercosporidium 
 personatum) 
Rust 
 (Puccinia arachidis) 
Web Blotch 
 (Phoma arachidicola) 
6.0 - 18.5 
(0.10 - 0.30) 
For foliar disease control only, a lower rate of TETRABAN 
may be applied on a 10- to 14-day interval. 
 
Do not apply more than two sequential applications of 
TETRABAN or other Group 11 fungicides before 
alternation with a fungicide that is not in Group 11. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 10 days 
3) Maximum Annual Rate: Do not apply more than 49 fl. oz. of product/A/year. 
a. Do not apply more than 0.8 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 2 applications per year at the high rate (24.5 fl. oz./A) or 8 applications per year at the low rate 
(6.0 fl. oz./A). When applying at 12.0 fl. oz./A, do not apply more than 4 applications per year. When applying at 18.5 fl. oz./A, 
do not apply more than 2 applications per year. 
5) Pre-Harvest Interval (PHI): Do not apply TETRABAN within 14 days of harvest. 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Pistachios Alternaria Late Blight 
 (Alternaria alternata) 
Botryosphaeria 
Panicle and Shoot Blight 
 (Botryosphaeria 
 dothidea) 
Septoria Leaf Spot 
 (Septoria pistaciarum) 
 
6.0 - 15.5 
(0.10 - 0.25) 
 
Begin TETRABAN applications prior to disease 
development and continue on 7- to 21 -day intervals 
following the resistance management guidelines. 
Applications may be made by ground, air or chemigation. 
An adjuvant may be added at specified rates. 
 
Do not apply more than two sequential applications of 
TETRABAN or other Group 11 fungicides before alternation 
with a fungicide that is not in Group 11 . 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 90 fl. oz. of product/A/year. 
a. Do not apply more than 1.5 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 5 applications per year at the high rate (15.5 fl. oz./A) or 15 applications per year at the low rate 
(6.0 fl. oz./A). 
5) Pre-Harvest Interval (PHI): Do not apply TETRABAN within 7 days of harvest. 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Potatoes Black Dot 
 (Colletotrichum 
 coccodes) 
Early Blight 
 (Alternaria solani) 
Late Blight 
 (Phytophthora 
infestans) 
Powdery Mildew 
 (Erysiphe 
 cichoracearum) 
6.0 - 20.0 
(0.10 - 0.33) 
Early blight - For a 7 -day application schedule, apply 
TETRABAN at 6.2 fl. oz. product/A. For a 14-day application 
schedule, apply 12.0 fl. oz. product/A. 
 
Late blight - Apply TETRABAN at 12.0 fl. oz. product/A on 
a 7 -day schedule. Initiate late blight applications in a 
preventative schedule prior to disease development 
according to local practices. If late blight symptoms develop 
or conditions favor disease, switch immediately to a non -
Group 11 fungicide, using a 5 -day schedule. Addition of a 
spreader/sticker may improve coverage. 
 
For all other diseases, Begin TETRABAN applications prior 
to disease development and continue every 7 -14 days 
following the resistance management guidelines. Use the 
high rate and the shorter interval if disease epidemics are 
severe. Applications may be made by ground, air or 
chemigation. 
 
Do not apply more than one application of TETRABAN or 
other Group 11 fungicides before alternation with a

Page 34 of 49 
fungicide that is not in Group 11. 
Soilborne Diseases 
Black Dot 
 (Colletotrichum 
 coccodes) 
Black Scurf 
 (Rhizoctonia solani) 
Silver Scurf 
 (Helminthosporium 
 solani) 
0.40 - 0.80 
fl. oz./1000 
row feet 
(0.0065- 0.013 
lb. a.i./1000 
row feet) 
For soil borne/seedling disease control, see directions and 
rates under the SOILBORNE/SEEDLING DISEASE 
CONTROL section. 
 
 
 
 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 120 fl. oz. of product/A/year. 
a. Do not apply more than 2.0 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 6 applications per year at the high rate (20.0 fl. oz./A) or 20 applications per year at the low rate 
(6.0 fl. oz./A). 
5) Pre-Harvest Interval (PHI): Do not apply TETRABAN within 14 days of harvest. 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Rice 
 
 
 
 
Sheath/Stem Diseases 
 
Sheath Blight 
 (Rhizoctonia solani) 
6.0 - 18.5 
(0.10 - 0.30) 
Apply TETRABAN prior to disease development. 
Applications may be made by ground, air or chemigation. 
For aerial application, use volumes of 5-10 GPA. An 
adjuvant may be added at specified rates. 
 
For sheath blight control, application rates may vary from 
9.0 to 12.0 fl. Oz/A depending on the growth stage of the 
rice and the severity of the disease. Consult with your local 
extension personnel or Winfield Solutions, LLC 
representative for information on sheath blight control. 
 
For other stem/sheath diseases including stem rot, black 
sheath rot, aggregate sheath spot and sheath spot, apply 
when disease is less than 4 inches above water line usually 
between panicle differentiation (PD) +5 days to PD +10 
days or at initial sign of disease. Under heavy disease 
pressure and conditions favorable for disease 
development, a second application may be applied. 
 
For foliar and panicle diseases, apply TETRABAN prior to 
disease development. 
 
TETRABAN must be applied as a preventative treatment for 
blast control and applied prior to favorable conditions for 
blast development. For panicle blast, make an application 
at mid-boot to boot -split but prior to full head emergence. 
Make a second application when panicles are 
approximately 60-90% emerged from the boot (7 -14 days 
later). 
 
When TETRABAN is being applied for panicle blast on 
continuous rice acreage (no rotation to other crops), do not 
make more than two sequential foliar applications of 
TETRABAN or other Group 11 fungicides over multiple 
years before alternating with a fungicide with a different 
mode of action. Do not make more than two foliar 
applications of TETRABAN or other Group 11 fungicides 
per acre per year. 
Aggregate Sheath Spot 
 (Ceratobasidium 
 oryzae-sativae = 
 Rhizoctonia 
 oryzae-sativae) 
Black Sheath Rot 
 (Gaeumannomyces 
 graminis var. graminis) 
Sheath Spot 
 (Rhizoctonia oryzae) 
Stem Rot 
 (Magnaporthe salvinii = 
 Sclerotium oryzae = 
 Nakateae sigmoidea) 
9.0 - 18.5 
(0.15 - 0.30) 
 
 
 
Foliar Diseases 
 
Brown Leaf Spot 
 (Cochliobolus 
 miyabeanus) 
Leaf Smut 
 (Entyloma oryzae) 
Narrow Brown Leaf Spot 
 (Cercospora janseana = 
 Cercospora oryzae) 
Panicle Diseases 
 
Kernel Smut 
 (Tilletia barclayana 
 = Neovossia 
 barclayana) 
Panicle Blast 
 (Pyricularia grisea)

Page 35 of 49 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 43 fl. oz. of product/A/year. 
a. Do not apply more than 0.70 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not treat rice fields used for aquaculture of fish and crustaceans. 
5) Do not apply when weather conditions favor drift from treated areas to non-target aquatic habitat. Use care in making 
applications near non-target aquatic habitats. 
6) Do not allow release of irrigation or flood water for at least 14 days after the last application. 
7) Pre-Harvest Interval (PHI): Do not apply TETRABAN within 28 days of harvest . 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Sorghum Anthracnose 
 (Colletotrichum 
 graminicola) 
Gray Leaf Spot 
 (Cercospora sorghi) 
6.0 - 15.5 
(0.10 - 0.25) 
Begin TETRABAN applications prior to disease 
development. Use the high rates under conditions 
favorable for severe disease pressure, dense plant 
canopies, or when susceptible varieties are planted. 
Contact extension personnel for local economic thresholds 
and timings for specific diseases in your area. Applications 
may be made by ground, air or chemigation. An adjuvant 
may be added at specified rates. 
 
Do not apply more than two sequential applications of 
TETRABAN or other Group 11 fungicides before 
alternation with a fungicide that is not in Group 11. 
 Soilborne Diseases 
 
Damping-Off 
 (Rhizoctonia solani, 
 Pythium 
 aphanadermatum) 
0.40 - 0.80 
fl. oz./1000 
row feet 
(0.0065- 0.013 
lb. a.i./1000 
row feet) 
For soil borne/seedling disease control, see directions and 
rates under the SOILBORNE/SEEDLING DISEASE 
CONTROL section. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: 
Grain and Stover 
 a. Do not apply more than 42 fl oz of product/A/year. 
 b. Do not apply more than 0.75 lb. a.i./A/year of azoxystrobin-containing products. 
Forage 
 a. Do not apply more than 30 fl. oz. of product/A/year 
 b. Do not apply more than 0.5 lb. a.i./A/year of azoxystrobin-containing products. 
4) For grain and stover, do not apply more than 2 applications per year at the high rate (15.5 fl. oz./A) or 7 applications per 
year at the low rate (6.0 fl. oz./A). 
5) For forage, do not apply more than 1 application per year at the high rate (15.5 fl. oz./A) or 5 applications per year at the low rate 
(6.0 fl. oz./A). 
6) Pre-Harvest Interval (PHI): Do not apply TETRABAN within 14 days of harvest. 
 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Soybean 
Soybean, Immature Seed 
(edamame) 
Aerial Blight 
 (Rhizoctonia solani) 
Alternaria Leaf Spot 
 (Alternaria spp.) 
Anthracnose 
 (Colletotrichum 
 truncatum) 
Brown Spot 
 (Septoria glycines) 
Cercospora Blight and 
Leaf Spot 
 (Cercospora 
kikuchii) 
Frogeye Leaf Spot 
 (Cercospora sojina) 
Pod and Stem Blight 
6.0 - 15.5 
(0.10 - 0.25) 
Begin TETRABAN applications prior to disease 
development. Use the high rates under conditions 
favorable for severe disease pressure, dense plant 
canopies, or when susceptible varieties are planted. 
Contact Extension personnel for local economic thresholds 
and timings for specific diseases in your area. Applications 
may be made by ground, air or chemigation. An adjuvant 
may be added at specified rates. A crop oil concentrate or 
non-ionic surfactant may be added with the lower use rate. 
 
Soybean rust: TETRABAN may be used at 4 fl. oz./A when 
tank mixed with a triazole registered for use on soybean 
rust. 
 
Do not apply more than two sequential applications of 
TETRABAN or other Group 11 fungicides before

Page 36 of 49 
 (Diaporthe 
 phaseolorum) 
Rust 
 (Phakopsora spp.) 
alternation with a fungicide that is not in Group 11. 
Soilborne Diseases 
Rhizoctonia solani 
 (Rhizoctonia solani) 
Southern blight 
 (Sclerotium rolfsii) 
0.40 - 0.80 
fl. oz./1000 
row feet 
(0.0065- 0.013 
lb. a.i./1000 
row feet) 
For soil borne/seedling disease control, see directions and 
rates under the SOILBORNE/SEEDLING DISEASE 
CONTROL 
section. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 14 days 
3) Maximum Annual Rate: Do not apply more than 90 fl. oz. of product/A/year. 
a. Do not apply more than 1.5 lb. a.i./A/year of azoxystrobin-containing products. 
4) For soybean forage and hay, do not make more than one application at 15.5 fl. oz .product/acre or 0.25 lb. a.i./A. 
5) Do not apply more than 5 applications per year at the high rate (15.5 fl. oz./A) or 15 applications per year at the low rate (6.0 fl. 
oz./A). 
6) Pre-Harvest Interval (PHI): 
a. Do not apply within 14 days of harvest of soybeans (beans). 
b. TETRABAN may be applied the day of harvest to soybean forage and hay. 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Stone Fruits 
 
Apricot 
Cherry, Sweet 
Cherry, Tart 
Nectarine 
Peach 
Plum 
Plumcot 
Prune 
 
 
Brown Rot Blossom Blight 
and Fruit Rot 
 (Monilinia fructicola, M. 
 laxa) 
 12.0 - 15.5 
(0.20 - 0.25) 
For brown rot blossom blight, begin applications at early 
bloom and continue through petal fall. For brown rot on fruit, 
TETRABAN may be applied to fruit up to the day of harvest. 
 
For scab, begin applications at petal fall and continue at 7- 
to 14-day intervals. 
 
For all other diseases, begin application at the onset of 
disease as a protectant fungicide and continue on a 7 - to 
14-day schedule. 
 
For peaches only, 9.0 -15.5 fl. oz. of TETRABAN may be 
used for scab control. 
 
Applications may be made by ground, air or chemigation. 
 
Do not apply more than two sequential applications of 
TETRABAN or other Group 11 fungicides before alternation 
with a fungicide that is not in Group 11. 
Scab 
 (Cladosporium 
 carpophilum) 
Alternaria spot and 
fruit rot 
 (Alternaria alternata) 
Anthracnose 
 (Colletotrichum 
 prunicola, 
 C. gloeosporioides) 
Leaf rust 
 (Tranzschelia discolor) 
Powdery mildew 
 (Sphaerotheca 
pannosa, 
 Podosphaera 
 clandestina) 
Shot hole 
 (Wilsonomyces 
 carpophilus) 
6.0 - 15.5 
(0.10 - 0.25) 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 90 fl. oz. of product/A/year. 
a. Do not apply more than 1.5 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 5 applications per year at the high rate (15.5 fl. oz./A) or 15 applications per year at the low rate (6.0 fl. 
oz./A). When applying at 12.0 fl. oz./A, do not apply more than 7 applications per year. 
5) Pre-Harvest Interval (PHI): TETRABAN may be applied the day of harvest.

Page 37 of 49 
 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Remarks Application Instructions 
Sugarcane Brown Rust 
 (Puccinia 
 melanocephela) 
Orange Rust 
 (Puccinia kuehnii) 
9.0 - 12.0 
(0.15 - 0.20) 
Begin T ETRABAN applications prior to rust 
development, and continue every 14 -28 days 
following resistance management guidelines. Scout 
fields and begin applications at the earliest sign of 
rust. An adjuvant may be used at recommended 
rates. For ground applications, apply TETRABAN in 
sufficient water volume for adequate coverage and 
canopy penetration. Applications may be made by 
ground, air or chemigation. 
 
Do not apply more than two sequential applications 
of TETRABAN or other Group 11 fungicide, before 
alternation with a fungicide that is not in Group 11. 
 
 
Specific Use Restrictions: 
1Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
1) Minimum Application Interval: 14 days 
2) Maximum Annual Rate: Do not apply more than 49 fl. oz. of product/A/year. 
a. Do not apply more than 0.80 lb. ai/A/year of azoxystrobin-containing products. 
3) Do not make more than four foliar applications of TETRABAN or other Group 11 fungicide per acre per year. 
4) Pre-Harvest Interval (PHI): Do not apply TETRABAN within 30 days of harvest. 
5) When applying by air, use no less than 5 gallons spray solution per acre. 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Tobacco Blue Mold 
 (Peronospora tabacina) 
Frogeye Leaf Spot 
 (Cercospora nicotianae) 
Target Spot 
 (Rhizoctonia solani) 
6.0 - 12.0 
(0.1 - 0.2) 
Begin TETRABAN applications prior to disease 
development or at first indication that blue mold is in the 
area. Do not apply TETRABAN as a curative application. If 
blue mold is present in the field, initiate applications with 
Acrobat MZ® prior to an TETRABAN application. Apply on 
a 7 - to 14 -day interval with shorter intervals under 
conditions conducive to disease development. For ground 
applications, apply TETRABAN in sufficient water volume 
for adequate coverage and canopy penetration. For aerial 
application, use volumes of 10-15 GPA. Applications may 
be made by ground, air or chemigation. Do not apply 
TETRABAN on greenhouse seedlings. Do not tank mix with 
Thiodan. Tank mixing TETRABAN with insecticides 
formulated as emulsifiable concentrates (EC) or containing 
high amounts of solvents, may cause some crop injury. 
 
Do not apply more than one application of TETRABAN or 
other Group 11 fungicides before alternation with a 
fungicide that is not in Group 11. 
 
NOTE: TETRABAN may enhance weather flecking on the 
leaves of certain tobacco types. This does not affect yield 
and quality. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 30 fl. oz. of product/A/year. 
a. Do not apply more than 0.52 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 2 applications per year at the high rate (12.0 fl. oz./A) or 5 applications per year at the low rate 
(6.0 fl. oz./A). 
5) Pre-Harvest Interval (PHI). T etraban may be applied the day of harvest. (0 day PHI).

Page 38 of 49 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Tomatoes, Tomatillos 
Subgroup 8-10A 
 
Including all cultivars 
and/or hybrids of these 
 
See complete list of 
tomato crops below. 
Anthracnose 
 (Colletotrichum 
 coccodes) 
Black Mold 
 (Alternaria alternata) 
Buckeye Rot 
 (Phytophthora spp.) 
Early Blight 
 (Alternaria solani) 
Powdery Mildew 
 (Oidiopsis sicula) 
Septoria Leaf Spot 
 (Septoria lycopersici) 
Target Spot 
 (Corynespora 
 cassiicola) 
5.0 - 6.2 
(0.08 - 0.10) 
Begin TETRABAN applications prior to disease development 
and continue throughout the season following the resistance 
management guidelines. For late blight, apply TETRABAN 
at 5- to 7-day intervals. For all other tomato diseases, apply 
TETRABAN at 7- to 21-day intervals. 
 
Applications may be made by ground, air or chemigation. 
 
Do not apply more than one application of TETRABAN or 
other Group 11 fungicides before alternation with a fungicide 
that is not in Group 11. 
 
Under certain weather conditions (particularly high 
temperatures) TETRABAN in combination with high rates of 
silicone-based or oil containing (petroleum or crop) additives 
or adjuvants may cause injury. Do not exceed 0.125% 
adjuvant (v/v). Consult a Winfield Solutions, LLC 
representative for more information concerning additives or 
adjuvants. 
 
A tank mixture with Dimethoate may cause crop injury. 
 
On fresh market tomatoes do not use adjuvants or tank mix 
TETRABAN with any emulsifiable concentrate (EC) product. 
Late Blight 
 (Phytophthora 
 infestans) 
6.2 
(0.10) 
Complete List of Tomato Crops: Bush Tomato; Cocona; Currant Tomato; Garden Huckleberry; Goji Berry; Groundcherry; 
Naranjilla; Sunberry; Tomatillo; Tomato; Tree Tomato; cultivars, varieties, and/or hybrids of these. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 5 days (late blight); 7 days (other diseases) 
3) Maximum Annual Rate: Do not apply more than 35 fl. oz. of product/A/year. 
a. Do not apply more than 0.6 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 5 applications per year at the high rate (6.2 fl. oz./A) or 7 applications per year at the low rate 
(5.0 fl. oz./A). 
5) Pre-Harvest Interval (PHI): TETRABAN may be applied the day of harvest. 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Tree Nuts 
 
Beechnut 
Brazil Nut 
Butternut 
Cashew 
Chestnut 
Chinquapin 
Filbert 
Hickory 
Macadamia 
Pecan 
Walnut 
 
Almonds, 
Pistachios 
(see specific use 
instructions) 
Alternaria Leaf and 
Fruit Spot 
 (Alternaria alternata) 
Anthracnose 
 (Colletotrichum 
 acutatum, Glomerella 
 cingulata) 
Eastern Filbert Blight 
 (Anisogramma 
 anomale) 
Late Blight 
 (Alternaria alternata) 
Scab 
 (Cladosporium 
 carpophilum) 
Septoria Leaf Spot 
 (Septoria pistaciarum) 
Shot Hole 
 (Wilsonomyces 
 carpophilus) 
Blossom Blight 
 (Monilinia laxa, 
 M. fructicola) 
6.0 - 12.0 
(0.10 - 0.20) 
Begin TETRABAN applications prior to disease 
development and continue , following the resistance 
management guidelines. 
 
Applications may be made by ground, air or chemigation. 
An adjuvant may be added at specified rates. 
 
For blossom blight, begin applications at early bloom and 
continue through petal fall. 
 
For all other diseases begin applications prior to disease 
development and continue at 7- to 21-day intervals. 
 
Do not apply more than two sequential applications of 
TETRABAN or other Group 11 fungicides before alternation 
with a fungicide that is not in Group 11.

Page 39 of 49 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 72 fl. oz. of product/A/year. 
a. Do not apply more than 1.2 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 6 applications per year at the high rate (12.0 fl. oz./A) or 12 applications per year at the low rate (6.0 fl. 
oz./A). 
5) Pre-Harvest Interval (PHI): Do not apply TETRABAN within 45 days of harvest. 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Tropical Fruit 
 
Acerola 
Atemoya 
Avocado 
Biriba 
Canistel 
Cherimoya 
Custard Apple 
Dragon Fruit 
Feijoa 
Guava 
llama 
Jaboticaba 
Jackfruit 
Longan 
Loquat 
Lychee 
Mango 
Papaya 
Passionfruit 
Pawpaw 
Persimmon 
Pulasan 
Rambutan 
Sapodilla 
Sapote, Black 
Sapote, Mamey 
Sapote, White 
Soursop 
Star Apple 
Starfruit 
Sugar Apple 
Spanish Lime 
Tamarind 
Anthracnose 
 (Colletotrichum spp.) 
Cercospora Leaf Spot 
 (Cercospora spp.) 
Powdery Mildew 
 (Erysiphe spp.) 
Rust 
 (Puccinia spp.) 
 
 
 
 
6.0 - 15.5 
(0.10 - 0.25) 
Begin TETRABAN applications prior to disease 
development and continue on a 10 - to 14-day schedule, 
following the 
resistance management guidelines. Applications may be 
made by ground, air or chemigation. An adjuvant may be 
added at specified rates. 
 
Follow the resistance management guidelines in 
the Resistance Management Section. Do not apply 
more than two sequential applications of TETRABAN or 
other Group 11 fungicides before alternation with a 
fungicide that is not in Group 11. 
Soilborne Diseases 
 
Seedling Root Rot, 
Basal Stem Rot 
 (Rhizoctonia solani) 
 
0.40 - 0.80 
fl. oz. /1000 
row feet 
(0.0065- 0.013 
lb. a.i./1000 
row feet) 
For soil borne/seedling disease control, see 
directions and rates under the SOILBORNE/SEEDLING 
DISEASE CONTROL section. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 10 days 
3) Maximum Annual Rate: Do not apply more than 90 fl. oz. of product/A/year. 
a. Do not apply more than 1.5 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 5 applications per year at the high rate (15.5 fl oz/A) or 15 applications per year at the low rate 
(6.0 fl. oz./A). 
5) Pre-Harvest Interval (PHI): TETRABAN may be applied the day of harvest.

Page 40 of 49 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Vegetables, Leaves of 
Root and Tuber Group 
and Root Subgroup 
 
Beet, Garden and 
 Sugar1,2 
Burdock1'2 
Carrot1'2 
Cassava, Bitter and 
Sweet1 
Celeriac (celery root)1,2 
Chervil, Turnip-Rooted1'2 
Chicory1'2 
Dasheen (taro)1 
Ginseng2 
Horseradish2 
Parsley, Turnip-Rooted2 
Parsnip1,2 
Radish1'2 
Radish, Oriental 
(daikon)1'2 
Rutabaga1,2 
Salsify2 
Salsify, Black1'2 
Salsify, Spanish2 
Skirret2 
Sweet Potato1 
Tanier1 
Turnip1,2 
Yam, True1 
 
 
 
Foliar Diseases 
 
Alternaria Leaf Spot 
 (Alternaria spp., 
 A. alternata) 
Ascochyta Leaf Spot 
 (Ascochyta cynarae) 
 Rust 
 (Uromyces betae, 
 Puccinia helianthi) 
White Rust 
 (Albugo tragopogonis) 
6.0 - 20.0 (0.10 
- 0.33) 
For powdery mildew, make preventative applications on a 
5- to 7 -day schedule. For all other diseases, begin 
TETRABAN applications prior to disease development and 
continue every 7 -14 days following the resistance 
management guidelines. Applications may be made by 
ground, air or chemigation. An adjuvant may be added at 
specified rates. 
 
Do not apply more than one application of TETRABAN or 
other Group 11 fungicides before alternation with a 
fungicide that is not in Group 11. 
Cercospora Leaf Spot 
 (Cercospora betae, 
 C. pastinaceae) 
Powdery Mildew 
 (Erysiphe polygoni, 
 Leveillula taurica) 
9.0 - 15.5 (0.15 
- 0.25) 
 
 
Soilborne Diseases 
 
Circular Spot, Southern 
Blight 
 (Sclerotium rolfsii) 
Pythium Root Rot 
 (Pythium 
 aphanidermatum) 
Rhizoctonia Stem 
Canker, Crown Rot 
 (Rhizoctonia solani) 
0.40 - 0.80 
fl. oz./1000 row 
feet 
(0.0065- 0.013 
lb. a.i./1000 
row feet) 
For soil borne/seedling disease control, see directions and 
rates under the SOILBORNE/SEEDLING DISEASE 
CONTROL section. 
 
For sugar beets apply 3-7 inch banded applications in a 
minimum of 10 gallons per acre at the 2 - to 8-leaf stage. 
Do not apply as a dribble application over the seed row. 
Tank mixtures of TETRABAN with crop oil concentrates 
(COC) or methylated spray oil (MSO) may result in crop 
injury. If cool soil conditions are expected after planting 
which could result in an extended period of plant 
emergence, do not apply TETRABAN in-furrow. If using 
TETRABAN at the time of planting, do not use a starter 
fertilizer with it. 
1 = Vegetable leaves of root and tuber subgroup 
2 = Root vegetable subgroup 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 5 days (powdery mildew); 7 days (other diseases) 
3) Maximum Annual Rate: Do not apply more than 120 fl. oz. of product/A/year. 
a. Do not apply more than 2.0 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 6 applications per year at the high rate (20.0 fl. oz./A) or 20 applications per year at the low rate 
(6.0 fl. oz./A). When applying at 9.0 fl. oz./A, do not apply more than 13 applications per year. When applying at 15.5 fl. oz./A, 
do not apply more than 7 applications per year. 
5) Apply as an in-furrow spray in a minimum of 10 gallons per acre. 
6) Pre-Harvest Interval (PHI): TETRABAN may be applied the day of harvest. 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Vegetables, Tuberous and 
Corm Subgroup 
 
Arracacha 
Arrowroot 
Artichoke, Chinese 
 and Jerusalem 
Canna, Edible 
Cassava, Edible, 
 Bitter and Sweet 
Chayote (root) 
Chufa 
Foliar Diseases 
 
Alternaria Leaf Spot 
 (Alternaria spp., 
 A. Alternata) 
Ascochyta Leaf Spot 
 (Ascochyta cynarae) 
Rust 
 (Uromyces betae, 
 Puccinia helianthi) 
White Rust 
 (Albugo tragopogonis) 
6.0 - 20.0 
(0.10 - 0.33) 
For powdery mildew, make preventative applications 
on a 5- to 7-day schedule. For all other diseases, begin 
TETRABAN applications prior to disease development 
and continue every 7-14 days following the resistance 
management guidelines. Applications may be made by 
ground, air or chemigation. An adjuvant may be added 
at specified rates. 
 
Do not apply more than one application of TETRABAN 
or other Group 11 fungicides before alternation with a 
fungicide that is not in Group 11.

Page 41 of 49 
Dasheen (Taro) 
Ginger 
Leren 
Potato 
Sweet Potato 
Tanier 
Turmeric 
Yam, Bean 
Yam, True 
Cercospora Leaf Spot 
 (Cercospora betae, 
 C. pastinaceae) 
Powdery Mildew 
 (Erysiphe polygoni, 
 Leveillula taurica) 
9.0 - 15.5 
(0.15 - 0.25) 
Soilborne Diseases 
 
Circular Spot, Southern 
Blight 
 (Sclerotium rolfsii) 
Rhizoctonia Stem Canker, 
Crown Rot 
 (Rhizoctonia solani) 
Pythium Root Rot 
 (Pythium 
 aphanidermatum) 
0.40 - 0.80 
fl. oz./1000 
row feet 
(0.0065- 0.013 
lb. a.i./1000 row 
feet) 
For soilborne/seedling disease control, see directions 
and rates under the SOILBORNE/SEEDLING 
DISEASE CONTROL section. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 5 days (powdery mildew); 7 days (other diseases) 
3) Maximum Annual Rate: Do not apply more than 120 fl. oz. of product/A/year. 
a. Do not apply more than 2.0 lb. a.i./A/year of azoxystrobin-containing products. 
4) Do not apply more than 6 applications per year at the high rate (20.0 fl. oz./A) or 20 applications per year at the low rate (6.0 fl. 
oz./A). When applying at 9.0 fl. oz./A, do not apply more than 13 applications per year. When applying at 15.5 fl. oz./A, do not 
apply more than 7 applications per year. 
5) Pre-Harvest Interval (PHI): Do not apply TETRABAN within 14 days of harvest. 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Watercress Cercospora Leaf Spot 
(Cercospora spp.) 
6.0 - 15.5 
(0.10 - 0.25) 
Begin TETRABAN applications prior to disease 
development and continue on a 7 - to 10 -day schedule, 
following the resistance management guidelines. 
Applications may be made by ground, air or chemigation. 
An adjuvant may be added at specified rates. 
 
Do not apply more than two sequential applications of 
TETRABAN or other Group 11 fungicides before 
alternation with a fungicide that is not in Group 11. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Minimum Application Interval: 7 days 
3) Maximum Annual Rate: Do not apply more than 90 fl. oz. of product/A/year. 
a. Do not apply more than 1.5 lb. a.i./.A/year of azoxystrobin-containing products. 
4) Do not apply more than 5 applications per year at the high rate (15.5 fl oz/A) or 15 applications per year at the low rate 
(6.0 fl. oz./A). 
5) Pre-Harvest Interval (PHI): Do not apply TETRABAN within 7 days of harvest. 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Cereals 
 
Wheat 
Triticale 
Leaf Rust 
 (Puccinia triticina = 
 Puccinia recondita 
 f.sp. tritici) 
Septoria Leaf and Glume 
Blotch 
 (Septoria tritici, 
 Septoria nodorum) 
Stem Rust 
 (Puccinia graminis) 
Stripe Rust 
 (Puccinia striiformis) 
Tan Spot 
4.0 - 12.0 
(0.07 - 0.20) 
Apply TETRABAN prior to disease development. 
Applications may be made by ground, air or chemigation. 
A crop oil concentrate adjuvant may be added at 1.0% v/v 
to optimize efficacy. 
 
Do not apply more than two sequential applications of 
TETRABAN or other Group 11 fungicide before 
alternation with a fungicide that is not in Group 11.

Page 42 of 49 
 (Pyrenophora 
triticirepentis) 
Powdery Mildew 
 (Erysiphe graminis) 
 
7.5 - 11.0 
(0.125 - 0.175) 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Do not apply after Feekes 10.54. 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: Do not apply more than 24 fl. oz. of product/A/year. 
a. Do not apply more than 0.40 lb. a.i./A/year of azoxystrobin-containing products. 
5) Do not make more than two applications of TETRABAN or other Group 11 fungicide per season. 
6) Pre-Harvest Interval (PHI): 
a. . Do not apply within 7 days for forage and hay. 
b. Do not apply within 14 days of grazing. 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) Application Instructions 
Wild Rice Brown Spot (Bipolaris 
oryzae or Bipolaris 
sorokiana) 
 
Also known as 
Helminthosporium oryzae 
and H. sativum 
 
Stem Rot (Nakataea 
sigmoidea) 
 12.5-15.5 
 (0.20-0.25) 
Apply TETRABAN prior to disease development. 
Applications may be made by ground, air, or chemigation. 
For aerial application, use volumes of 5-10 GPA. An 
adjuvant may be added at specified rates. 
 
For foliar diseases, apply TETRABAN prior to disease 
development. Apply during tillering, boot, early heading, or 
at initial sign of disease. Under heavy disease pressure and 
conditions favorable for disease development, a second 
application may be applied. 
 
Do not apply more than two sequential applications of 
TETRABAN or other Group 11 fungicide before alternation 
with a fungicide that is not in Group 11. 
Specific Use Restrictions: 
1) Maximum Single Application Rate: Do not exceed the maximum rate listed in the table. 
2) Do not treat wild rice fields used for aquaculture of fish and crustaceans. 
3) Do not apply when weather conditions favor drift from treated areas to non-target aquatic habitat. Use care in making 
applications near non-target aquatic habitats. 
4) Minimum Application Interval: 7 days 
5) Maximum Annual Rate: Do not apply more than 37.5 fl. oz. of product/A/year 
a. Do not apply more than 0.70 lb. a.i./A/year of azoxystrobin-containing products. 
6) Do not make more than two applications of TETRABAN ' or other Group 11 fungicide per season. 
7) Do not allow release of irrigation or flood water for at least 14 days after the last application.. 
8) Pre-Harvest Interval (PHI): Do not apply within 28 days of harvest. 
 
 
 
 
TETRABAN Rate Conversion Chart 
Fl. oz. Product/A Lb. a.i./A Treated Acres/ Gal. Product 
4.0 0.07 32.0 
5.0 0.08 25.6 
5.5 0.09 23.2 
6.0 0.10 21.3 
6.2 0.10 21.3 
7.0 0.11 18.3 
8.5 0.14 15.4 
9.0 0.15 14.2 
9.2 0.15 14.2 
10.0 0.16 13.0 
11.0 0.18 11.6 
12.0 0.20 10.4 
12.3 0.20 10.4 
13.0 0.21 9.8 
14.0 0.23 9.1 
15.4 0.25 8.3 
15.5 0.25 8.3 
18.3 0.30 6.9 
18.5 0.30 6.9

Page 43 of 49 
20.0 0.33 6.4 
20.3 0.33 6.4 
24.5 0.40 5.2 
 
 
POST HARVEST APPLICATIONS 
Crop Target Diseases Use Rate Application Instructions 
Bananas 
Plantains 
 
Crown Rot/Crown Mold 
(Colletotrichum 
musae, 
Fusarium 
pallidoroseum, 
Acremonium 
Spp., 
Ceratocystis paradoxa, 
Glomerella cingulata, 
Penicillium spp.) 
 
200 - 400 
ppm solution 
 
Apply TETRABAN as a single application of a 200 - 400 
ppm solution to achieve good coverage. The application 
may be made as a spray, dip or may be painted onto the 
cut ends of the bananas. Application of the 200 ppm rate is 
appropriate for short distance transportation (e.g., within the 
USA). When a longer time in transport is expected (export), 
use the 300-400 ppm rate. If alum (1% w/v) is added to the 
spray solution, stir the suspension frequently as 
sedimentation and flocculation may occur. Addition of a 
non-ionic surfactant (0.10% v/v) may improve the 
compatibility of this mixture. 
 
Amount of TETRABAN to Mix 100 Gallons for Post-Harvest 
Banana Applications 
 
 
 
TETRABAN 
Use Rate 
100.0 gal. 
Spray Solution 
200 ppm 11 fl. oz. 
300 ppm 15 fl. oz. 
400 ppm 21 fl. oz. 
Specific Use Restrictions: 
1) Do not make more than one application to bananas as post-harvest treatment. 
2) TETRABAN may be degraded by exposure to direct sunlight. Do not store treated fruit in direct sunlight. 
 
 
 
Crop Target Diseases 
Use Rate 
fl. oz. 
product/A 
(lb. a.i./A) 
Application Instructions 
Citrus Fruit Crop Group 
10-10 
 
Calamondin 
Citron 
Citrus Hybrids 
Grapefruit 
Kumquat 
Lemon 
Lime 
Mandarin 
Orange (sour and 
 sweet) 
Pummelo 
Satsuma Mandarin 
Tangerine 
Uniq Fruit Hybrid 
 
Including all cultivars 
and/or hybrids of these. 
 
See complete list of citrus 
fruit crops below. 
Penicillium Decays 
Green Mold, 
Whisker Mold, 
Suppression of 
Blue Mold 
 (Penicillium spp.) 
Diplodia Stem-End Rot 
 (Diplodia natalensis) 
Phomopsis Stem-End Rot 
 (Phomopsis citrii) 
 
See 
Application 
Instructions 
Conduct treatment only in a closed automated 
system. 
 
Use TETRABAN as a dip, drench, flood, or spray for the 
control of certain post-harvest diseases. 
 
For high volume (dilute) applications: Add no more than 
9 fl. oz. (0.148 lb. a.i.) of this product to 25-100 gallons of 
an appropriate water, wax/oil emulsion, or aqueous 
dilution of a wax/oil emulsion for the crop being treated. 
Use T-Jet, flooders, or similar application systems. 
 
For low volume (concentrate) applications: 
Add no more than 9 fl. oz. (0.148 lb. a.i.) of this product to 
7-25 gallons of water, wax/oil emulsion, or aqueous 
dilution of wax/oil emulsion for the crop being treated. 
Apply to 250,000 lb. of fruit. Use a controlled-droplet type 
of applicator or similar system. 
 
For dip applications: Add no more than 9 fl. oz. (0.148 
lb.a.i.) of this product to 100 gallons of water, wax/oil 
emulsion, or aqueous dilution of wax/oil emulsion. Dip for 
approximately 30 seconds and allow fruit to drain. For 
maximum decay control, treat citrus fruit once before 
storage and once after storage, just prior to marketing. 
 
Complete List of Citrus Fruit Crops: Australian Desert Lime (Eremocitrus glauca); Australian Finger Lime (Microcitrus australasica); 
Australian Round Lime (Microcitrus australis); Brown River Finger Lime (Microcitrus papuana); Calamondin (Citrofortunella 
microcarpa); Citron (Citrus medica); Citrus Hybrids, Citrus spp., Eremocitrus spp., Fortunella spp., Microcitrus spp., and Poncirus 
spp.; Grapefruit (Citrus paradise); Japanese Summer Grapefruit (Citrus natsudaidai); Kumquat (Fortunella spp.); Lemon (Citrus

Page 44 of 49 
limon); Lime (Citrus aurantiifolia); Mediterranean Mandarin (Citrus deliciosa); Mount White Lime (Microcitrus garrowayae); New 
Guinea Wild Lime (Microcitrus warburgiana); Orange, Sour (Citrus aurantium); Orange, Sweet (Citrus sinensis); Pummelo (Citrus 
maxima); Russell River Lime (Microcitrus inodora); Satsuma Mandarin (Citrus unshiu); Sweet Lime (Citrus limetta); Tachibana 
Orange (Citrus tachibana); Tahiti Lime (Citrus latifolia); Tangelo (Citrus x tangelo); Tangerine (Mandarin) (Citrus reticulate); Tangor 
(Citrus nobilis); Trifoliate Orange (Poncirus trifoliate); Uniq Fruit (Citrus aurantium Tangelo group); cultivars, varieties and/or 
hybrids of these. 
Specific Use Restrictions: 
1) Do not make more than two applications to citrus fruit as post-harvest treatments. 
2) TETRABAN may be degraded by exposure to direct sunlight. 
3) Do not store treated fruit in direct sunlight. 
4) Do not use a mechanically-pressurized handgun. 
5) Do not apply more than 9 fl. oz. (0.148 lb. a.i.) of this product per application. 
6) Do not apply more than 18 fl. oz. (0.296 lb. a.i.) of this product post-harvest. 
 
Tuberous and Corm Vegetable Subgroup 1C - Post harvest 
Arracacha; Arrowroot; Artichoke, Chinese; Artichoke, Jerusalem; Canna, Edible; Cassava, Bitter and 
Sweet; Chayote (root); Chufa; Dasheen; Ginger; Leren; Potato; Sweet Potato; Tanier; Turmeric; Yam 
Bean; Yam, True. 
 
Use TETRABAN as a post-harvest spray for the control of certain post-harvest rots caused by Silver Scurf 
(Helminthosporium solani), Fusarium species, Late Blight (Phytophthora infestans), and Pink Rot 
(Phytophthora erythroseptica). 
 
Application 
Method Disease Rate (fl. oz.) Application Instructions 
In-Line Aqueous Spray 
Application 
Silver Scurf 
Fusarium Dry Rot 
Late Blight 
Pink Rot 
0.6 fl. oz./ton of tubers Ensure proper coverage of the tubers. Tubers 
should be tumbling as they are treated. 
 
Mix the fungicide solution in an appropriate 
amount of water for the crop being treated. 
 
Use T-jet, CDA, or similar application system. 
Specific Use Restrictions: 
• 1) Do not use on seed potatoes or seed pieces. 
• 2) Do not make more than one post -harvest application to the tubers. 
• 3) Ensure the TETRABAN solution remains in suspension by using agitation. 
 
TURF 
Golf course turf (not for use in California). Commercial turf farms (not for use in California). 
 
TETRABAN is recommended for control of anthracnose, brown patch, cool weather brown patch (yellow 
patch), Fusarium patch, gray leaf spot, gray snow mold (Typhula blight), leafspot, melting out, necrotic 
ring spot, pink patch, pink snow mold, Pythium blight, Pythium root rot, red thread, Rhizoctonia large 
patch, southern blight, spring dead spot, summer patch, take-all patch, and Zoysia patch on golf courses, 
lawns and landscape areas around residential, institutional, public, commercial and industrial buildings, 
parks, recreational areas and athletic fields. 
 
Integrated Pest (Disease) Management: 
Sound turf management resulting in healthy, vigorous turf is the foundation of a good IPM program. 
Cultural practices such as proper choice of turf variety, nutrient management, proper cutting height, 
thatch management, and proper watering, drainage, and moisture stress management should be 
integrated with the use of fungicides to increase turf vigor and reduce the susceptibility to disease, 
Immunoassay detection kits and extension service diagnostic services can assist in the early and 
accurate identification of causal organisms and corresponding selection of the proper fungicide when 
required. 
 
Resistance Management: 
Some turf disease pathogens are known to have developed resistance to products used repeatedly for 
their control. TETRABAN should be applied in a tank mix or alternation program with other registered 
fungicides that have a different mode of action and to which pathogen resistance has not developed. Do 
not apply more than two sequential TETRABAN applications for Pythium spp. control. For all other

Page 45 of 49 
diseases when Pythium spp. is not present, do not apply more than three sequential applications of 
TETRABAN. 
 
Application Directions: 
Apply TETRABAN prior to disease development. Mix TETRABAN with the required amount of water and 
apply as a dilute spray application in 2-4 gallons of water per 1000 square feet (87-174 gallons per acre). 
Repeat applications at specified intervals for as long as required. For spot treatments, use 0.4 fl. oz. 
TETRABAN per 1 to 2 gallons of water. 
 
Specific Use Restrictions: 
1) Do not apply more than 9.6 quarts product/acre/year (7.1 fl. oz. product/1000 square feet/year). 
2) Do not apply more than 5 lbs. ai/A/year of azoxystrobin-containing products. 
3) Do not apply more than 0.15 fl. oz (0.0025 lb ai) of this product per gallon when applying to 
landscape turf using hand-held equipment. 
4) Do not apply more than 58 fl. oz (3.65 pts) of this product (0.95 lb ai) per acre when applying to 
golf course or landscape turf using a mechanically pressurized handwand. 
5) Apply by ground only. 
6) Do not apply to commercial turf farms by chemigation. 
7) Aerial and/or chemigation application to sod is prohibited. 
 
Rate Ranges: 
Use the shortest specified application interval and/or use the higher specified rate when prolonged 
favorable disease conditions exist. 
 
Dollar Spot: 
TETRABAN does not control dollar spot. TETRABAN is compatible in tank mixes with many other 
fungicides that control dollar spot. Always tank mix TETRABAN with another fungicide that controls dollar 
spot when this disease is present. 
 
Follow directions under TANK MIXES/COMPATIBILITY above. 
 
It is the pesticide user's responsibility to ensure that all products are registered for the intended use. 
Read and follow the applicable restrictions and limitations and directions for use on all product labels 
involved in tank mixing. Users must follow the most restrictive directions for use and precautionary 
statements of each product in the tank mixture. 
 
 
DIRECTIONS FOR APPLICATION FOR TURF DISEASES 
Target Diseases 
Use Rate 
(fl. oz. product 
per 1000 sq. ft.) 
Application 
Interval 
(days) 
Application Instructions 
Anthracnose 
(Colletotrichum graminicola) 
0.38-0.77 14-28 Apply when conditions are favorable for 
disease development. 
Brown Patch 
(Rhizoctonia solani) 
0.38-0.77 14-28 Apply when conditions are favorable for 
disease development. 
Cool weather brown patch 
Yellow patch 
(Rhizoctonia cerealis) 
0.38-0.77 28 Make one or two applications in fall or 
when conditions are favorable for 
disease development. 
Fusarium patch 
(Microdochium nivale) 
0.38-0.77 14-28 Apply when conditions are favorable for 
disease development. 
Gray Leaf Spot 
(Pyricularia grisea) 
0.38-0.77 14-28 Begin applications before disease is 
present and continue applications while 
conditions are favorable for 
disease development.

Page 46 of 49 
Target Diseases 
Use Rate 
(fl. oz. product 
per 1000 sq. ft.) 
Application 
Interval 
(days) 
Application Instructions 
Gray snow mold 
Typhula blight 
(Typhula incarnata, 
T. ishikariensis) 
1.35 0.77 Single 
application 
14 
Make a single application of 1.35 fl. oz. 
or two applications of 0.77 spaced 14 
days apart in late fall just before snow 
cover. Tank mixing with another snow 
mold fungicide may enhance control 
under severe disease pressure. 
Leafspot 
(Bipolaris sorokiniana) 
0.38-0.77 14-21 Apply when conditions are favorable for 
disease development. 
Melting out 
(Drechslera poae) 
0.38-0.77 14-21 Apply when conditions are favorable for 
disease development. 
Necrotic ring spot 
(Leptosphaeria korrae) 
0.38-0.77 14-28 Apply when conditions are favorable for 
disease development. 
Pink patch 
(Limonomyses roseipellis) 
0.38-0.77 14-28 Apply when conditions are favorable for 
disease development. 
Pink snow mold 
(Microdochium nivale) 
1.35 0.77 Single 
application 
 
14 
Make a single application of 1.35 fl. oz. 
or two applications of 0.77 spaced 14 
days apart in late fall just before snow 
cover. Tank mixing with another snow 
mold fungicide may enhance control 
under severe disease pressure. 
Pythium blight 
Pythium root rot 
(Pythium aphanidermatum, 
Pythium spp.) 
0.38-0.77 10-14 Begin applications before disease is 
present. During periods of prolonged 
favorable conditions, treat on the 10 day 
application interval. For use on newly 
seeded as well as established turf. 
Red thread 
(Laetisaria fuciformis) 
0.38-0.77 14-28 Apply when conditions are favorable for 
disease development. 
Rhizoctonia large patch 
(Rhizoctonia solani) 
0.38-0.77 28 Make one or two applications in fall or 
when conditions are favorable for 
disease development. 
Southern blight 
(Sclerotium rolfsii) 
0.38-0.77 14-28 Apply when conditions are favorable for 
disease development. 
Spring dead spot 
(Leptosphaeria korrae) or 
(Gaeumannomyces 
graminis var. graminis) or 
(Ophiosphaerella 
herpotricha) 
0.38-0.77 28 Make one or two applications in fall or 
when conditions are favorable for 
disease development. 
Summer patch 
(Magnaporthe poae) 
0.38-0.77 14-28 Apply when conditions are favorable for 
disease development. 
Take-all patch 
(Gaeumannomyces 
graminis var. avenae) 
0.38-0.77 28 Make two applications 28 days apart in 
the spring and two applications 28 days 
apart in the fall. 
Zoysia patch 
(Rhizoctonia solani and/or 
Gaeumannomyces 
incrustana) 
0.38-0.77 28 Make one or two applications in late fall 
before snow cover or when conditions 
are favorable for disease development. 
Do not apply on top of snow.

Page 47 of 49 
 
Do not apply more than two sequential applications of TETRABAN for control of Pythium spp. For all 
other diseases, do not apply more than four sequential applications of TETRABAN. 
 
TETRABAN Rate Conversion Chart for Turf 
Fluid Ounces 
Product 
Per 1000 Sq. Ft. 
Ounces A.I. 
Per 1000 Sq. Ft. 
Fluid Ounces 
Product 
Per Acre 
Pints of 
Product 
Per Acre 
0.4 0.104 17.4 1.1 
0.5 0.130 21.8 1.4 
0.6 0.156 26.1 1.6 
0.7 0.182 30.5 1.9 
0.77 0.200 33.5 2.1 
1.35 0.35 58.8 3.7 
 
Amount of TETRABAN to Mix 100 Gallons for Turf Applications 
Spray Volume (gallons/1000 square feet) 
TETRABAN Use Rate 
(fl. oz.) 
2.0 gals. 
(fl. oz.) 
3.0 gals. 
(fl. oz.) 
4.0 gals. 
(fl. oz.) 
0.4 20 13 10 
0.5 25 17 13 
0.6 30 20 15 
0.7 35 23 18 
0.77 38.5 25.7 19.3 
1.35 67.5 45 33.75

Page 48 of 49 
STORAGE AND DISPOSAL 
Do not contaminate water, food or feed by storage and disposal. 
 
PESTICIDE STORAGE 
Store in original containers only. Keep container closed when not in use. Do not store near food or feed. 
In case of spill on floor or paved surfaces, mop and remove to chemical waste storage area until proper 
disposal can be made if product cannot be used according to the label. 
 
PESTICIDE DISPOSAL 
Pesticide wastes are acutely hazardous. Improper disposal of excess pesticide, spray mixture, or rinsate 
is a violation of Federal Law. If these wastes cannot be disposed of by use according to label instructions, 
contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste representative of 
the nearest EPA Regional Office for guidance. 
 
CONTAINER HANDLING 
Follow the handling instructions appropriate for the container size and type. 
 
Non-refillable containers less than or equal to 5 gallons: Do not reuse or refill this container. Triple 
rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining 
contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill 
the container ¼ full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or 
a mix tank or store rinsate for later use and disposal. Drain for 10 seconds after the flow begins to drip. 
Repeat this procedure two more times. Then offer for recycling if available or puncture and dispose of in a 
sanitary landfill, or by incineration, or by other procedures approved by state and local authorities. 
 
Non-refillable container greater than 5 gallons: Do not reuse or refill this container. Triple rinse container 
(or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into 
application equipment or a mix tank. Fill the container ¼ full with water. Replace and tighten closures. Tip 
container on its side and roll it back and for th, ensuring at least one complete revolution, for 30 seconds. 
Stand the container on its end and tip it back and forth several times. Turn the container over onto its other 
end and tip it back and forth several times. Empty the rinsate into application eq uipment or a mix tank or 
store rinsate for later use and disposal. Repeat this procedure two more times. Then offer for recycling if 
available or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures 
approved by state and local authorities. 
 
Refillable containers greater than 5 gallons: Refill this container with pesticide only. Do not reuse the 
container for any other purpose. Cleaning the container before final disposal is the responsibility of the 
person disposing of the container. Cleaning before refilling is the responsibility of the person refilling. To 
clean container before final disposal, empty the remaining contents from this container into application 
equipment or mix tank. Fill the container about 10 percent full with water. Agitate vigorously or recirculate 
water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection 
system. Repeat this rinsing procedure two more times. Then offer for recycling if available or puncture and 
dispose of in a sanitary landfill, or by incineration, or by o ther procedures allowed by state and local 
authorities. 
 
 
CONTAINER IS NOT SAFE FOR FOOD, FEED OR DRINKING WATER.

Page 49 of 49 
FOR CHEMICAL EMERGENCY: Spill, leak, fire, exposure, or accident, call 
CHEMTREC 1-800-424-9300 
 
WARRANTY DISCLAIMER 
The directions for use of this product must be followed carefully. TO THE EXTENT CONSISTENT WITH 
APPLICABLE LAW, (1) THE GOODS DELIVERED TO YOU ARE FURNISHED “AS IS” BY 
MANUFACTURER OR SELLER AND (2) MANUFACTURER AND SELLER MAKE NO WARRANTIES, 
GUARANTEES, OR REPRESENTATIONS OF ANY KIND TO BUYER OR USER, EITHER EXPRESS OR 
IMPLIED, OR BY USAGE OF TRADE, STATUTORY OR OTHERWISE, WITH REGARD TO THE 
PRODUCT SOLD, INCLUDING, BUT NOT LIMITED TO MERCHANTABILITY, FITNESS FOR A 
PARTICULAR PURPOSE, USE, OR ELIGIBILITY OF THE PRODUCT FOR ANY PARTICULAR TRADE 
USAGE. UNINTENDED CONSEQUENCES, INCLUDING BUT NOT LIMITED TO INEFFECTIVENESS, 
MAY RESULT BECAUSE OF SUCH FACTORS AS THE PRESENCE OR ABSENCE OF OTHER 
MATERIALS USED IN COMBINATION WITH THE GOODS, OR THE MANNER OF US E OR 
APPLICATION, INCLUDING WEATHER, ALL OF WHICH ARE BEYOND THE CONTROL OF 
MANUFACTURER OR SELLER AND ASSUMED BY BUYER OR USER. THIS WRITING CONTAINS 
ALL OF THE REPRESENTATIONS AND AGREEMENTS BETWEEN BUYER, MANUFACTURER AND 
SELLER, AND NO PERSON OR AGENT OF MANUFACTURER OR SELLER HAS ANY AUTHORITY TO 
MAKE ANY REPRESENTATION OR WARRANTY OR AGREEMENT RELATING IN ANY WAY TO THESE 
GOODS. 
 
LIMITATION OF LIABILITY 
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, IN NO EVENT SHALL MANUFACTURER OR 
SELLER BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, OR FOR 
DAMAGES IN THE NATURE OF PENALTIES RELATING TO THE GOODS SOLD, INCLUDING USE, 
APPLICATION, HANDLING, AND DISPOSAL. MANUFACTURER OR SELLER SHALL NOT BE LIABLE 
TO BUYER OR USER BY WAY OF INDEMNIFICATION TO BUYER OR TO CUSTOMERS OF BUYER, 
IF ANY, OR FOR ANY DAMAGES OR SUMS OF MONEY, CLAIMS OR DEMANDS WHATSOEVER, 
RESULTING FROM OR BY REASON OF, OR RISING OUT OF THE MISUSE, OR FAILURE TO FOLLOW 
LABEL WARNINGS OR INSTRUCTIONS FOR USE, OF THE GOODS SOLD BY MANUFACTURER OR 
SELLER TO BUYER. ALL SUCH RISKS SHALL BE ASSUMED BY THE BUYER, USER, OR ITS 
CUSTOMERS. BUYER’S OR USER’S EXCLUSIVE REMEDY, AND MANUFACTURER’ S OR SELLER’S 
TOTAL LIABILITY SHALL BE FOR DAMAGES NOT EXCEEDING THE COST OF THE PRODUCT. 
 
If you do not agree with or do not accept any of directions for use, the warranty disclaimers, or limitations 
on liability, do not use the product, and return it unopened to the Seller, and the purchase price will be 
refunded. 
 
Tetraban® is a registered trademark of Winfield Solutions, LLC 
[Altisolo™ is a registered trademark of Winfield Solutions, LLC] 
All other trademarks are property of their respective owners.