crop-chem-docs/corpus/epa_ppls/524-687.md

# ROUNDUP ORIGINAL II HERBICIDE

- EPA Reg No: **524-687**
- Registrant: BAYER CROPSCIENCE, LLC
- Signal word: Warning
- Active ingredients: Glyphosate, isopropylamine salt (41%)
- Label accepted: 2009-09-21
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000524-00454-20090921.pdf

---
Stephen Adams
Monsanto Company
1300 I (Eye) Street, NW
Suite 450 East
Washington, DC 20005
\ ,
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY
WASHINGTON, D.C. 20460
OFFICE OF
PREVENTION, PESTICIDES
AND
TOXIC SUBSTANCES
Subject: EPA Reg. 524-454 I Roundup Original II Herbicide Label Amendment
Dear Mr. Adams:
The labeling is acceptable.
A stamped copy of the label is enclosed for your records. This label supercedes all previously
accepted labels. Your release for shipment of the product constitutes acceptance of these
conditions. If you have any questions please call Erik Kraft at 703-308-9358 or email at
Kraft.Erik@epa.gov.
Sincerely,
C;A Icy I-
Jim Tompkins
Product Manager 25
Herbicide Branch
Registration Division (7505P)

I.
)
MASTER LABEL FOR EPA REG. NO. 524-454
Registered Brand Names:
Roundup Original II Herbicide
Roundup Original RT Herbicide
Rasca I PI u s Herb ici de -A---::C::-C-=-::E~P -;:;;T:;-:EY;-;:D~
MON 8709 Herbicide
Honcho Plus Herbicide
Master Label Table of Contents
Main Label for Food Crop Uses 2 - 81
II. Main Label for Industrial, Turf & Ornamental Uses 82 - 114
III. Supplemental Labeling 115 - 137
**See each label part for more detailed table of contents**
J,
.> )
, J,
.J
Note to Reviewer: , "
The current version of this Master Label was accepted by the Agency on August 17, 2009. lhf;(d
were, however, many wording changes required to be made to the label as a provision 01' Its
acceptance, changes that were perpetuated throughout the label. In order to have a clear
understanding of the approved label, we are requesting that the Agency review and approve this
latest revision, which primarily addresses the use of the words "general" and "should", the two
words which were the subject of most of the changes required to be made. This Master Label is
being submitted concurrently with a revised Master Label for EPA Reg. No. 524-445. The
changes being proposed to that Master Label are intended to make it nearly identical to this label.
Master Label 524-454 Page 1 of 139 Submitted August 26, 2009

I. MAIN LABEL FOR FOOD CROP USES
[INSERT BRAND NAME]
Herbicide
Complete Directions for Use
EPA Reg. No. 524-454
AVOID CONTACT OF HERBICIDE WITH FOLIAGE, GREEN STEMS, EXPOSED NON-WOODY
ROOTS OR FRUIT OF CROPS (EXCEPT AS SPECIFIED FOR INDIVIDUAL ROUNDUP READY®
CROPS), DESIRABLE PLANTS AND TREES, BECAUSE SEVERE INJURY OR DESTRUCTION MAY
RESULT.
Herbicide for Roundup Ready Crops
Selective broad-spectrum weed control in Roundup Ready crops
Non-selective, broad-spectrum weed control for many agricultural systems and farmsteads
A member of the Roundup Family of Agricultural Herbicides by Monsanto
The President's Green Chemistry Award was presented in 1996 to Monsanto for its innovative "zero
waste" process in the manufacture of Roundup Herbicide.
Not all products listed on this label are registered for use in California. Check the registration status of
each product in California before using.
Read the entire label before using this product.
Use ~nly according to label instructions.
Read the "LIMIT OF WARRANTY AND LIABILITY" statement at the end of the label before buying or
using. If terms are not acceptable, return at once unopened.
THIS IS AN END-USE PRODUCT. [INSERT COMPANY NAME] DOES NOT INTEND AND HAS NOT
REGISTERED IT FOR REFORMULATION. SEE INDIVIDUAL CONTAINER LABEL FOR
REPACKAGING LIMITATIONS.
[Optional Container Label Statement: THIS IS AN END-USE PRODUCT. [INSERT COMPANY NAME]
DOES NOT INTEND AND HAS NOT REGISTERED IT FOR REFORMULATION. REPACKAGING OF
THIS PRODUCT FOR DISTRIBUTION OR SALE MAY BE CONDUCTED ONLY UNDER THE TERMS
OF A WRITIEN CONTRACT WITH [INSERT COMPANY NAME].]
[Optional Container Label Statement: THIS IS AN END-USE PRODUCT. [INSERT COMPANY NAME]
DOES NOT INTEND AND HAS NOT REGISTERED IT FOR REFORMULATION OR REPACKAGING.]
CONTENTS
1 1.0 INGREDIENTS
2 2.0 IMPORTANT PHONE NUMBERS
3 3.0 PRECAUTIONARY STATEMENTS
3.1 Hazards to Humans and Domestic Animals
Master Label 524-454 Page 2 of 139 Submitted August 26, 2009

') ) '-\oQ\l\Q
I. MAIN LABEL FOR FOOD CROP USES
3.2 Environmental Hazards
3.3 Physical or Chemical Hazards
4 4.0 STORAGE AND DISPOSAL
5 5.0 PRODUCT INFORMATION
6 6.0 WEED RESISTANCE MANAGEMENT
6.1 Weed Management Practices
6.2 Management of Glyphosate-Resistant Biotypes
7 7.0 MIXING
7.1 Mixing with Water
7.2 Tank Mixtures
7.3 Tank-Mixing Procedures
7.4 Mixing for Hand-Held Sprayers
7.5 Surfactants
7.6 Ammonium Sulfate
7.7 Colorants or Dyes
7.8 Drift Reduction Additives
8 8.0 APPLICATION EQUIPMENT AND TECHNIQUES
8.1 Aerial Equipment
8.2 Ground Broadcast Equipment
8.3 Hand-Held or Backpack Equipment
8.4 Selective Equipment
8.5 Injection Systems
8.6 Controlled Droplet Applicator (COA)
9 9.0 ANNUAL AND PERENNIAL CROPS
9.1 Cereal and Grain Crops
9.2 Corn
9.3 Cotton
9.4 Fallow Systems
9.5 Grain Sorghum (Milo)
9.6 Herbs and Spices
9.7 Oil Seed Crops
9.8 Soybeans
9.9 Sugarcane
9.10 Vegetable Crops
9.11 Miscellaneous Crops
10 10.0 TREE, VINE, AND SHRUB CROPS
10.1 Berry Crops
10.2 Citrus
10.3 Miscellaneous Tree Food Crops
10.4 Non-Food Tree Crops
10.5 Pome Fruit
10.6 Stone Fruit
10.7 Tree Nuts
10.8 Tropical and Subtropical Trees and Fruits
Master Label 524-454 Page 3 of 139 Submitted August 26, 2009

-',
I
,I
I. MAIN LABEL FOR FOOD CROP USES
10.9 Vine Crops
11 11.0 PASTURE GRASSES, FORAGE LEGUMES, AND RANGELANDS
11,1 Alfalfa, Clover, and Other Forage Legumes
11.2 Conservation Reserve program (CRP)
11.3 Grass Seed or Sod Production
11.4 Pastures
11 .5 Rangelands
12 12.0 ROUNDUP READY CROPS
12.1 Roundup Ready Alfalfa
12.2 Roundup Ready Canola (Spring Varieties)
12.3 Roundup Ready Canola (Winter Varieties)
12.4 Corn Hybrids with Roundup Ready 2 Technology
12.5 Roundup Ready Cotton
12.6 Roundup Ready Flex Cotton
12.7 Roundup Ready Soybean
12.8 Roundup Ready 2 Yield Soybean
12.9 Roundup Ready Sugar Beet
13 13.0 NON-CROP USES AROUND THE FARMSTEAD
13.1 Farmstead Weed Control and Trim-And-Edge
13.2 Greenhouse/Shade house
13,3 Chemical Mowing
13.4 Cut Stump
13,5 Habitat Management
14 14.0 ANNUAL WEEDS RATE SECTION
14.1 Annual Weeds-Tank Mixtures with 2,4-0, Dicamba, or Tordon 22K
14.2 Annual Weeds-Hand-Held or Backpack Equipment
14.3 Annual Weeds-Tank Mixtures with Atrazine for Fallow and Reduced Tillage Systems
15 15.0 PERENNIAL WEEDS RATE SECTION
16 16.0 WOODY BRUSH AND TREES RATE SECTION
17 17.0 LIMIT OF WARRANTY AND LIABILITY
1.0 INGREDIENTS
ACTIVE INGREDIENT:
*Glyphosate, N-(phosphonomethyl)glycine, in the form of its isopropylamine salt.. ........ , ............... .
OTHER INGREDIENTS: .................................... , ............................................................................. .
41.0%
59.0%
100.0%
*Contains 480 grams per liter or 4 pounds per U.S. gallon of the active ingredient glyphosate, in the form
of its isopropylamine salt. Equivalent to 356 grams per liter or 3 pounds per U.S. gallon of the acid,
glyphosate.
No license granted under any non-U.S. patent(s).
2.0 IMPORTANT PHONE NUMBERS
Master Label 524-454 Page 4 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
1. FOR PRODUCT INFORMATION OR ASSISTANCE IN USING THIS PRODUCT,
CALL TOLL-FREE,
[INSERT PHONE NUMBER]
2. IN CASE OF AN EMERGENCY INVOLVING THIS HERBICIDE PRODUCT, OR FOR MEDICAL
ASSISTANCE, CALL COLLECT, DAY OR NIGHT,
[INSERT PHONE NUMBER]
3.0 PRECAUTIONARY STATEMENTS
3.1 Hazards to Humans and Domestic Animals
Keep out of reach of children
WARNING! AVISO!
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do
not understand the label, find someone to explain it to you in detail.
CAUSES SUBSTANTIAL BUT TEMPORARY EYE INJURY
HARMFUL IF SWALLOWED OR INHALED
Do not get in eyes or on clothing
Avoid breathing vapor or spray mist
FIRST AID: Call a poison control center or doctor for treatment advice.
IF IN EYES • Hold eye open and rinse slowly and gently with water for 15 to 20 minutes.
• Remove contact lenses if present after the first 5 minutes then continue
rinsing eye.
IF INHALED • Move person to fresh air.
• If person is not breathing, call 911 or an ambulance, then give artificial
respiration, preferably mouth-to-mouth if possible.
IF SWALLOWED • Have person sip a glass of water if able to swallow.
• Do not induce vomiting unless told to by a poison control center or doctor.
• Do not give anything to an unconscious person.
• Have the product container or label with you when calling a poison control center or doctor, or
going for treatment.
• You may also contact [INSERT PHONE NUMBER], collect day or night, for emergency medical
treatment information.
• This product is identified as [INSERT BRAND NAME], EPA Registration No. 524-454.
DOMESTIC ANIMALS: This product is considered to be relatively nontoxic to dogs and other domestic
animals; however, ingestion of this product or large amounts of freshly sprayed vegetation may result in
temporary gastrointestinal irritation (vomiting, diarrhea, colic, etc.). If such symptoms are observed,
provide the animal with plenty of fluids to prevent dehydration. Call a veterinarian if symptoms persist for
more than 24 hours.
Personal Protective Equipment (PPE)
Master Label 524-454 Page 5 of 139 Submitted August 26, 2009

) 1ck\~O
I. MAIN LABEL FOR FOOD CROP USES
Applicators and other handlers must wear: long-sleeved shirt and long pants, shoes plus socks, and
protective eyewear. Follow manufacturer's instructions for cleaning/maintaining PPE. If no such
instructions for wash abies exist, use detergent and hot water. Keep and wash PPE separately from other
laundry.
Discard clothing and other absorbent materials that have been drenched or heavily contaminated with
this product's concentrate. Do not reuse them.
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements
listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d) (4-6)], the
handler PPE requirements may be reduced or modified as specified in the WPS.
User Safety Recommendations
Users should:
• Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet.
• Remove clothing immediately if pesticide gets inside .
• Then wash thoroughly and put on clean clothing.
3.2 Environmental Hazards
Do not apply directly to water, to areas where surface water is present or to intertidal areas below the
mean high water mark. Do not contaminate water when cleaning equipment or disposing of equipment
washwaters.
3.3 Physical or Chemical Hazards
Spray solutions of this product may be mixed, stored and applied using only stainless steel, fiberglass,
plastic or plastic-lined steel containers.
DO NOT MIX, STORE OR APPLY THIS PRODUCT OR SPRAY SOLUTIONS OF THIS PRODUCT IN
GALVANIZED STEEL OR UNLINED STEEL (EXCEPT STAINLESS STEEL) CONTAINERS OR SPRAY
TANKS. This product or spray solutions of this product react with such containers and tanks to produce
hydrogen gas which may form a highly combustible gas mixture. This gas mixture could flash or explode,
causing serious personal injury, if ignited by open flame, spark, welder's torch, lighted cigarette or other
ignition source.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in any manner inconsistent with its labeling. This product
can only be used in accordance with the Directions for Use on this label or in separately published
supplemental labeling. Supplemental labeling can be found on the Internet at www.agrian.com.
www.cdms.net, or www.greenbook.net, or obtained from your Authorized [INSERT COMPANY NAME]
retailer or [INSERT COMPANY NAME] representative.
[The following paragraph is reserved and will only appear on final printed labeling for products under this
registration if and when required by EPA:
ENDANGERED SPECIES PROTECTION REQUIREMENTS: This product may have effects on federally
listed threatened or endangered species or their critical habitat in some locations. When using this
product, you must follow the measures contained in the Endangered Species Protection Bulletin for the
county or parish in which you are applying the pesticide. To determine whether your county or parish has
a Bulletin, and to obtain that Bulletin, consult http://www.epa.gov/espp/,or call 1-800-447-3813 no more
than 6 months before using this product. Applicators must use Bulletins that are in effect in the month in
Master Label 524-454 Page 6 of 139 Submitted August 26, 2009

I. MAIN LABEL FOR FOOD CROP USES
which the pesticide will be applied. New Bulletins will generally be available from the above sources 6
months prior to their effective dates.]
Do not apply this product in a way that will contact workers or other persons, either directly or through
drift. Only protected handlers may be in the area during application. For any requirements specific to
your State or Tribe, consult the agency responsible for pesticide regulations.
Agricultural Use Requirements
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR
Part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests,
nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training,
decontamination, notification, and emergency assistance. It also contains specific instructions and
exceptions pertaining to the statements on this label about personal protective equipment (PPE) and
restricted entry interval. The requirements in this box only apply to uses of this product that are covered
by the Worker Protection Standard.
Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours.
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and
that involves contact with anything that has been treated, such as plants, soil, or water, is: coveralls,
chemical resistant gloves greater than 14 mils in thickness composed of materials such as butyl rubber,
natural rubber, neoprene rubber, or nitrile rubber, shoes plus socks and protective eyewear.
Non-Agricultural Use Requirements
The requirements in this box apply to uses of this product that are NOT within the scope of the Worker
Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is
used to produce agricultural plants on farms, forests, nurseries or greenhouses.
Keep people and pets off treated areas until spray solution has dried.
4.0 STORAGE AND DISPOSAL
Proper pesticide storage and disposal are essential to protect against exposure to people and the
environment due to leaks and spills, excess product or waste, and vandalism. Do not allow this product
to contaminate water, foodstuffs, feed or seed by storage and disposal.
PESTICIDE STORAGE: Store pesticides away from food, pet food, feed, seed, fertilizers, and veterinary
supplies. Keep container closed to prevent spills and contamination.
PESTICIDE DISPOSAL: To avoid wastes, use all material in this container, including rinsate, by
application according to label directions. If wastes cannot be avoided, offer remaining product to a waste
disposal facility or pesticide disposal program. Such programs are often run by state or local
governments or by industry. All disposal must be in accordance with applicable federal, state and local
regulations and procedures.
[Alternate PESTICIDE DISPOSAL statement for transport vehicles only: To avoid wastes, empty as much
product from this transport vehicle as possible for repackaging or use in accordance with label directions.
If wastes cannot be avoided, offer remaining product or rinsate to a waste disposal facility or pesticide
disposal program. All disposal must be in accordance with applicable federal, state and local regulations
and procedures.]
CONTAINER HANDLING AND DISPOSAL: See container label for container handling and disposal
instructions and refilling limitations.
Master Label 524-454 Page 7 of 139 Submitted August 26. 2009

)
I. MAIN LABEL FOR FOOD CROP USES
[CONTAINER HANDLING AND DISPOSAL STATEMENTS AND REFILLING LlMITA TlONS FOR
CONTAINER LABELS:]
[CONTAINER HANDLING AND DISPOSAL STATEMENT AND REFILLING LlMITA TlON FOR
NONREFILLABLE RIGID CONTAINERS OF LESS THAN 1-GALLON CAPACITy]
Nonrefillable container. Do not reuse or refill this container.
[Alternate container statement: Nonrefillable container. Do not reuse this container to hold materials
other than pesticides or dilute pesticides (rinsate). After emptying and cleaning, it may be allowable to
temporarily hold rinsate or other pesticide-related materials in the container. Contact your state
regulatory agency to determine allowable practices in your state.]
Triple rinse this container promptly after emptying.
Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain
for 10 seconds after the flow begins to drip. Fill the container ~ full with water and recap. Shake for 10
seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal.
Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times.
Then offer this container for recycling, if available. If recycling is not available, dispose of in accordance
with federal, state and local regulations and procedures, which may include puncturing the properly
rinsed container and disposing in a sanitary landfill.
[Alternate container disposal statement: Once properly rinsed, some agricultural plastic pesticide
containers can be taken to a container collection site or picked up for recycling. [Optional container
disposal statement: To find the nearest site, contact your chemical dealer or [INSERT COMPANY
NAME] at [INSERT PHONE NUMBER].] If recycling is not available, dispose of in accordance with
federal, state and local regulations and procedures, which may include puncturing the properly rinsed
container and disposing in a sanitary landfilL]
[Optional container statement: This container is not to be sold to homeowners for residential use.]
[CONTAINER HANDLING AND DISPOSAL STATEMENT AND REFILLING LlMITA TlON FOR PLASTIC
ONE-WAYNONREFILLABLE RIGID PLASTIC 2.5-GALLON CONTAINERS AND BOTTLESOTHER
CONTAINERS OF GREATER THAN 1-GALLON BUT EQUAL TO OR LESS THAN 5-GALLON
CAPACITY]
Nonrefillable container. Do not reuse this container to hold materials other than pesticides or dilute
pesticides (rinsate). After emptying and cleaning, it may be allowable to temporarily hold rinsate or other
pesticide-related materials in the container. Contact your state regulatory agency to determine allowable
practices in your state.
[Alternate container statement: Nonrefillable container. Do not reuse or refill this container.]
Triple rinse or pressure rinse (or equivalent) this container promptly after emptying.
Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain
for 10 seconds after the flow begins to drip. Fill the container ~ full with water and recap. Shake for 10
seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal.
Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times.
Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and
continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over
application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing
nozzle in the side of the container, and rinse at about 40 PSI for at least 30 seconds. Drain for 10
seconds after the flow begins to drip.
Master Label 524-454 Page 8 of 139 Submitted August 26. 2009

I. MAIN LABEL FOR FOOD CROP USES
Once properly rinsed, some agricultural plastic pesticide containers can be taken to a container collection
site or picked up for recycling. [Optional container disposal statement: To find the nearest site, contact
your chemical dealer or [INSERT COMPANY NAME] at [INSERT PHONE NUMBER).] If recycling is not
available, dispose of in accordance with federal, state and local regulations and procedures, which may
include puncturing the properly rinsed container and disposing in a sanitary landfill.
[Alternate container disposal statement: Then offer this container for recycling, if available. If recycling is
not available, dispose of in accordance with federal, state and local regulations and procedures, which
may include puncturing the properly rinsed container and disposing in a sanitary landfill.]
[Optional container statement: This container is not to be sold to homeowners for residential use.]
[CONTAINER HANDLING AND DISPOSAL STATEMENT AND REFILLING LIMITATION FOR NON
REFILLABLE RIGID PLASTIC 30-GALLON CONTAINERS AND OTHER CONTAINERS OF GREATER
THAN 5-GALLON CAPACITY]
Nonrefillable container. Do not reuse or refill this container.
[Alternate container statement: Nonrefillable container. Do not reuse this container to hold materials other
than pesticides or dilute pesticides (rinsate). After emptying and cleaning, it may be allowable to
temporarily hold rinsate or other pesticide-related materials in the container. Contact your state
regulatory agency to determine allowable practices in your state.]
Triple rinse or pressure rinse (or equivalent) this container promptly after emptying.
Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. Fill the
container X full with water. Replace and tighten closures. Tip container on its side and roll it back and
forth, ensuring at least one revolution, for 30 seconds. Stand the container on its end and tip it back and
forth several times. Turn the container over onto its other end tip it back and forth several times. Empty
the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Repeat this
procedure two more times.
Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and
continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over
application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing
nozzle in the side of the container, and rinse at about 40 PSI for at least 30 seconds. Drain for 10
seconds after the flow begins to drip.
Once properly rinsed, some agricultural plastic pesticide containers can be taken to a container collection
site or picked up for recycling. [Optional container disposal statement: To find the nearest site, contact
your chemical dealer or [INSERT COMPANY NAME] at [INSERT PHONE NUMBER).] If recycling is not
available, dispose of in accordance with federal, state and local regulations and procedures, which may
include puncturing the properly rinsed container and disposing in a sanitary landfill.
[Alternate container disposal statement: Then offer this container for recycling, if available. If recycling is
not available, dispose of in accordance with federal, state and local regulations and procedures, which
may include puncturing the properly rinsed container and disposing in a sanitary landfill.]
[Optional container disposal statement: Return Properly Rinsed Container to Monsanto for Recycling
Contact: 1-800-ROUNDUP (1-800-768-6387)]
[CONTAINER HANDLING AND DISPOSAL STATEMENT AND REFILLING LIMITATION FOR ALL
REFILLABLE CONTAINERS EXCEPT TRANSPORT CONTAINERS:]
Refillable container. Refill this container with pesticide only. Do not reuse this container for any other
purpose.
Master Label 524-454 Page 9 of 139 Submitted August 26, 2009

\\d\~O
I. MAIN LABEL FOR FOOD CROP USES
Cleaning this container before refilling is the responsibility of the refiller. Cleaning this container before
final disposal is the responsibility of the person disposing of the container.
To clean this container before final disposal, empty the remaining contents from this container into
application equipment or a mix tank. Fill the container about 10 percent full with water. Agitate
vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application
equipment or rinsate collection system. Repeat this rinsing procedure two more times. Then offer this
container for recycling, if available.
[Optional container disposal statement: To obtain information about recycling refillable containers, contact
[INSERT COMPANY NAME] at [INSERT PHONE NUMBER].]
[Optional container disposal statement: Return Properly Rinsed Container to Monsanto for Recycling,
Contact 1-800-ROUNDUP (1-800-768-6387)]
[CONTAINER HANDLING AND DISPOSAL STATEMENT FOR ALL TRANSPORT CONTAINERS AS
DEFINED IN 40 CFR 156.3]
Emptied container retains vapor and product residue. Observe all precautions stated on this label until
the container is cleaned, reconditioned or destroyed. Prior to refilling, inspect carefully for damage such
as cracks, punctures, abrasions, and worn-out threads and closures. Clean thoroughly before reuse for
transportation of a material of different composition or before retiring this transport vehicle from service.
5.0 PRODUCT INFORMATION
Product Description: This product is a postemergence, systemic herbicide with no soil residual activity.
It is generally non-selective and gives broad-spectrum control of many annual weeds, perennial weeds,
woody brush and trees. It is formulated as a water-soluble liquid and can be applied using most standard
industrial or field sprayers after dilution and thorough mixing with water or other carriers according to label
directions.
Time to Symptoms: This product moves through the plant from the point of foliage contact to and into
the root system. Visible effects are a gradual wilting and yellowing of the plant that advances to complete
browning of above ground growth and deterioration of underground plant parts. Effects are visible on
most annual weeds within 2 to 4 days, but on most perennial weeds, effects may not be visible for 7 or
more days. Extremely cool or cloudy weather following treatment may slow activity of this product and
delay development of visual symptoms.
Stage of Weeds: Annual weeds are easiest to control when they are small. Best control of most
perennial weeds is obtained when treatment is made at late growth stages approaching maturity. Refer to
the "ANNUAL WEEDS RATE SECTION", "PERENNIAL WEEDS RATE SECTION" and "WOODY BRUSH
AND TREES RATE SECTION" for more information on specific weeds.
Always use the higher product application rate within the given range iwhen weed growth is heavy or
dense or when weeds are growing in an undisturbed (non-cultivated) area.
Reduced weed control may result when treating weeds with disease or insect damage, weeds heavily
covered with dust, or weeds under poor growing conditions.
Cultural Considerations: Reduced control may result when application is made to annual or perennial
weeds that have been mowed, grazed, or cut, and have not been allowed to re-grow to the specified
stage for treatment.
Rainfastness: Heavy rainfall soon after application may wash this product off of the foliage and a repeat
application may be required for adequate weed control.
Master Label 524-454 Page 10 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
Spray Coverage: For best results, spray coverage must be uniform and complete. Do not spray foliage
to the point of runoff.
Mode of Action: The active ingredient in this product inhibits an enzyme found only in plants and
microorganisms that is essential to the formation of specific amino acids.
No Soil Activity: Weeds must be emerged at the time of application to be controlled by this product.
Weeds germinating from seed after application will not be controlled. Plants arising from unattached
underground rhizomes or root stocks of perennials that had not yet emerged at the time of application of
this product will not be affected and will continue to grow.
Biological Degradation: Degradation of this product is primarily a biological process carried out by soil
microbes.
Maximum Application Rates: The maximum application or use rates stated throughout this product's
labeling are given in units of volume (fluid ounces, pints, or quarts) of this product per acre. However, the
maximum allowed application rates apply to this product combined with the use of any and all other
herbicides containing the active ingredient glyphosate, whether applied separately or as tank mixtures, on
a basis of total pounds of glyphosate (acid equivalents) per acre. If more than one glyphosate-containing
product is applied to the same site within the same year, you must ensure that the total use of glyphosate
does not exceed the maximum allowed. See the "INGREDIENTS" section of this label for necessary
product information.
Except as otherwise specified in a crop section of this label, the combined total of all treatments must not
exceed 8 quarts of this product (6 pounds of glyphosate acid) per acre per year. For applications in non
crop sites or in tree, vine, or shrub crops, the combined total of all treatments must not exceed 10.6
quarts of this product (8 pounds of glyphosate acid) per acre per year.
NOTE: Use of this product in any manner not consistent with this label may result in injury to persons,
animals or crops, or have other unintended consequences.
6.0 WEED RESISTANCE MANAGEMENT
GROUP 1/>'!f;·:1 HERBICIDE
Glyphosate, the active ingredient in this product, is a Group 9 herbicide based on the mode of action
classification system of the Weed Science Society of America. Any weed population may contain plants
naturally resistant to Group 9 herbicides. Weed species resistant to Group 9 herbicides may be
effectively managed utilizing another herbicide from a different Group or by using other cultural or
mechanical practices.
6.1 Weed Management Practices
To minimize the occurrence of glyphosate-resistant biotypes observe the following weed management
practices:
• Scout your fields before and after herbicide application.
• Start with a clean field, using either a burndown herbicide application or tillage.
• Control weeds early when they are relatively small.
• Add other herbicides (e.g. a selective and/or a residual herbicide) and cultural practices (e.g. tillage
or crop rotation) where appropriate.
• One method for adding other herbicides into a continuous Roundup Ready system is to rotate to
other Roundup Ready crops.
Master Label 524-454 Page 11 of 139 Submitted August 26. 2009

I. MAIN LABEL FOR FOOD CROP USES
• Use the application rate for the most difficult to control weed in your field. Avoid tank mixtures with
other herbicides that reduce the efficacy of this product (through antagonism), or with ones that
encourage application rates of this product below those specified on this label.
• Control weed escapes and prevent weeds from setting seeds.
• Clean equipment before moving from field to field to minimize the spread of weed seed or plant parts.
• Use new commercial seed that is as free of weed seed as possible.
• Report any incidence of repeated non-performance of this product on a particular weed to your
[INSERT COMPANY NAME] representative, local retailer, or county extension agent.
6.2 Management of Glyphosate-Resistant Biotypes
Note: Appropriate testing is critical in order to determine if a weed is resistant to glyphosate. Contact
your [INSERT COMPANY NAME) representative to determine if resistance in any particular weed
biotype has been confirmed in your area, or you can visit on the Internet
www.weedresistancemanagement.com or www.weedscience.org. For more information see the
"ANNUAL WEEDS RATE SECTION" and "PERENNIAL WEEDS RATE SECTION" of this label.
[Alternative text: Note: Appropriate testing is critical in order to determine if a weed is resistant to
glyphosate. Call 1-800-ROUNDUP (1-800-768-6387) or contact your Monsanto representative to
determine if resistance in any particular weed biotype has been confirmed in your area, or visit on the
Internet www.weedresistancemanagement.com or www.weedscience.org. For more information see the
"ANNUAL WEEDS RATE SECTION" and "PERENNIAL WEEDS RATE SECTION" of this labeL]
Directions for the control of biotypes confirmed to be resistant to glyphosate are made available on
separately published supplemental labeling or Fact Sheets for this product and can be obtained from your
local retailer or [INSERT COMPANY NAME) representative.
Since the occurrence of new glyphosate-resistant weeds cannot be determined until after product use
and scientific confirmation, [INSERT COMPANY NAME) is not responsible for any losses that may result
from the failure of this product to control glyphosate-resistant weed biotypes.
The following good agronomic practices can reduce the spread of confirmed glyphosate-resistant
biotypes:
• If a naturally occurring resistant biotype is present in your field, this product can be tank-mixed or
applied sequentially with an appropriately labeled herbicide with a different mode of action to achieve
control.
• Cultural and mechanical control practices (e.g. crop rotation or tillage) can also be used as
appropriate.
• One method for adding other herbicides into a continuous Roundup Ready system is to rotate to
other Roundup Ready crops.
• Scout treated fields after herbicide application and control weed escapes, including resistant
biotypes, before they set seed.
• Thoroughly clean equipment before leaving fields known to contain resistant biotypes.
7.0 MIXING
Spray solutions of this product may be mixed, stored and applied using only clean stainless steel,
fiberglass, plastic or plastic-lined steel containers.
Master Label 524-454 Page 12 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
DO NOT MIX, STORE OR APPLY THIS PRODUCT OR SPRAY SOLUTIONS OF THIS PRODUCT IN
GALVANIZED STEEL OR UNLINED STEEL (EXCEPT STAINLESS STEEL) CONTAINERS OR SPRAY
TANKS.
Eliminate any risk of siphoning the contents of the tank back into the carrier source while mixing. Use
approved anti-back-siphoning devices where required by State or local regulations.
Clean sprayer parts promptly after using this product by thoroughly flushing with water.
PRODUCT PERFORMANCE MAY BE SIGNIFICANTLY REDUCED IF WATER CONTAINING SOIL
SEDIMENT IS USED AS CARRIER. DO NOT MIX THIS PRODUCT WITH WATER FROM PONDS AND
DITCHES THAT IS VISIBLY MUDDY OR MURKY.
7.1 Mixing with Water
This product mixes readily with water. Mix spray solutions of this product as follows.
Begin filling the mixing tank or spray tank with clean water. Add the required amount of this product near
the end of the filling process and mix gently. Use caution to avoid siphoning back into the carrier source.
During mixing, foaming of the spray solution may occur. To prevent or minimize foaming, mix gently,
terminate by-pass and return lines at the bottom of the tank, and, if necessary, use an anti-foam or
defoaming agent.
7.2 Tank Mixtures
This product does not provide residual weed control. This product may be tank-mixed with other
herbicides to provide residual weed control, a broader weed control spectrum or an alternate mode of
action. Read and follow all label directions of all products in the tank mixture.
Some tank-mix products have the potential to cause crop injury under certain conditions, at certain
growth stages and/or under other circumstances. Read the label for all products used in the tank mixture
prior to use to determine the potential for crop injury.
Tank mixtures with other herbicides, insecticides, fungicides, micronutrients or foliar fertilizers could result
in reduced weed control or crop injury. Buyer and all users are responsible for any and all loss or
damage in connection with the use or handling of mixtures of this product with herbicides or other
materials that are not expressly specified on this label, or in separate supplemental labeling or Fact
Sheets published for this product.
When a tank mixture with a generic active ingredient, such as 2,4-D, atrazine, dicamba, diuron or
pendimethalin is described on this label, the user is responsible for ensuring that the specific application
being made is included on the label of the specific product being used in the tank-mix.
Refer to all individual product labels, supplemental labeling and Fact Sheets for all products in the tank
mixture, and observe all precautions and limitations on the label, including application timing restrictions,
soil restrictions, minimum re-cropping interval and rotational guidelines. Use according to the most
restrictive precautionary statements for each product in the tank mixture.
Always predetermine the compatibility of all tank-mix products together in the carrier by mixing small
proportional quantities in advance.
For best results, apply tank mixtures with this product at a minimum spray volume rate of 10 gallons per
acre.
7.3 Tank-Mixing Procedure
Prepare tank mixtures of this product as follows:
1. Place a 20- to 35-mesh screen or wetting basket over the filling port of the tank.
Master Label 524-454 Page 13 of 139 Submitted August 26, 2009

I. MAIN LABEL FOR FOOD CROP USES
2. Through the screen, fill the tank one-half full with water and start gentle agitation.
3. If ammonium sulfate is to be used, add it slowly through the screen into the tank, and continue adding
water into the tank through the screen. If dry ammonium sulfate is being used, ensure that it is
completely dissolved in the tank before adding other products.
4. If a wettable powder is used, prepare a slurry of it with water, and add it SLOWLY through the screen
into the tank while continuing gentle agitation.
5. If a flowable formulation is used, premix one part flowable with one part water, and add the diluted
mixture SLOWLY through the screen into the tank while continuing gentle agitation.
6. If an emulsifiable concentrate formulation is used, premix one part emulsifiable concentrate with two
parts water and add the diluted mixture SLOWLY through the screen into the tank while continuing
gentle agitation.
7. Continue filling the tank with water through the screen and add the required amount of this product
near the end of the filling process.
8. If a nonionic surfactant is used, add it to the tank before completing the filling process.
9. Add individual formulations to the spray tank as follows: wettable powders, flowable, emulsifiable
concentrates, drift control additives, water-soluble liquids (this product), surfactants.
Maintain gentle agitation at all times until the contents of the tank are sprayed out. If the spray mixture is
allowed to settle, thorough agitation is required to re-suspend the mixture before spraying.
Keep by-pass and return lines on or near the bottom of the tank to minimize foaming. Screen size in
nozzle or line strainers can be no finer than 50 mesh.
7.4 Mixing for Hand-Held Sprayers
Prepare the desired spray volume by mixing the amount of this product as indicated in the following table
in water:
Sera~ Solution
Amount of [INSERT BRAND NAME]
Desired
Volume 0.5% 1% 1.5% 2% 5% 10%
1 gal 0.70z 1.30z 20z 2.70z 6.50z 130z
25 gal 1 pt 1 qt 1.5 qt 2 qt 5 qt 10 qt
100 gal 2 qt 1 gal 1.5 gal 2 gal 5 gal 10 gal
2 tablespoons = 1 fluid ounce
For use in backpack sprayers, consider mixing the appropriate amount of this product with water in a
larger container and then filling the sprayer from the larger container.
7.5 Surfactants
Nonionic surfactants (NIS) or wetting agents that have at least 70 percent active ingredient and are
labeled for use with herbicides may be added to the spray solution, unless otherwise directed. Do not
reduce rates of this herbicide when adding surfactants. Read and carefully observe all caution statements
and other information appearing on the surfactant label.
7.6 Ammonium Sulfate
Master Label 524-454 Page 14 of 139 Submitted August 26, 2009

I. MAIN LABEL FOR FOOD CROP USES
The addition of 1 to 2 percent dry ammonium sulfate by weight or 8.5 to 17 pounds per 100 gallons of
water may increase the performance of this product on annual and perennial weeds, particularly under
hard water conditions, drought conditions or when tank-mixed with certain residual herbicides. An
equivalent rate of a liquid formulation of ammonium sulfate may also be used. Ensure that dry ammonium
sulfate is completely dissolved in the spray tank before adding herbicides. Thoroughly rinse the spray
system with clean water promptly after use to reduce corrosion.
NOTE: When using ammonium sulfate, apply this product at rates specified on this label. Lower rates
will result in reduced performance.
7.7 Colorants or Dyes
Colorants or marking dyes may be added to spray solutions of this product; however, they can reduce
performance. Use colorants or dyes according to the manufacturer's directions.
7.8 Drift Reduction Additives
Drift reduction additives may be used with all equipment types, except wiper applicators, sponge bars and
Controlled Droplet Applicators. When a drift reduction additive is used, read and carefully observe all
precautions, limitations, and all other information on the additive label. Use of drift reduction additives can
affect spray coverage, which can reduce product performance.
8.0 APPLICATION EQUIPMENT AND TECHNIQUES
Do not apply this product through any type of irrigation system.
This product may be applied with the following application equipment:
Aerial - Fixed wing and helicopter
Ground Broadcast Spray - Boom or boom less systems, pUll-type sprayers, floaters, pick-up sprayers,
spray coupes and other ground broadcast equipment
Hand-Held or Backpack Spray Equipment - Backpack sprayers, pump-up pressure sprayers,
handguns, handwands, mistblowers*, lances and other hand-held and motorized spray equipment used
to direct the spray onto weed foliage
* This product is not registered in California or Arizona for use in mistblowers.
Selective Equipment - Shielded and hooded sprayers, wiper applicators and sponge bars
Injection Systems - Aerial or ground injection sprayers
Controlled Droplet Applicator (CDA) - Hand-held or boom-mounted applicators that produce a spray
consisting of a narrow range of droplet sizes
APPLY THESE SPRAY SOLUTIONS IN PROPERLY MAINTAINED AND CALIBRATED EQUIPMENT
CAPABLE OF DELIVERING THE DESIRED VOLUMES.
8.1 Aerial Equipment
All treatments described on this label may be made using aerial application equipment where appropriate,
provided that the applicator complies with the precautions and restrictions specified on this label and in
separate supplemental labeling published for this product.
DO NOT APPLY THIS PRODUCT USING AERIAL SPRAY EQUIPMENT EXCEPT UNDER
CONDITIONS SPECIFIED ON THIS LABEL.
Apply this herbicide at the appropriate rate as described on this label in 3 to 15 gallons of water per acre
unless otherwise directed on this label or in separate supplemental labeling of Fact Sheets published for
this product. Unless otherwise specified, do not exceed 2 quarts of this product per acre when using
Master Label 524-454 Page 15 of 139 Submitted August 26. 2009

)
\1 Ok \40
I. MAIN LABEL FOR FOOD CROP USES
aerial application equipment. Refer to the individual use area sections of this label for application rates,
spray volumes and additional use instructions.
FOR AERIAL APPLICATION IN ARKANSAS OR CALIFORNIA, OR SPECIFIC COUNTIES THEREIN,
REFER TO THE FEDERAL SUPPLEMENTAL LABELING FOR AERIAL APPLICATION OF THIS
PRODUCT IN THAT STATE OR COUNTY FOR SPECIFIC INSTRUCTIONS, RESTRICTIONS AND
REQUIREMENTS.
This product, when tank-mixed with dicamba, may not be applied by air in California.
Only 2,4-0 amine formulations may be used with aerial application in California. Tank mixtures of this
product with 2,4-0 amine formulations may be applied by air in California for fallow and reduced tillage
systems and for alfalfa and pasture renovation applications only.
Ensure uniform application. To avoid streaked, uneven or overlapped application, use appropriate
marking devices.
Do not allow the herbicide solution to mist, drip, drift, or splash onto desirable vegetation since minute
quantities of this product can cause severe damage or destruction to the crop, plants or other areas on
which treatment was not intended.
AERIAL SPRAY DRIFT MANAGEMENT
The following drift management requirements must be followed to avoid off-target movement during aerial
application to agricultural field crops.
1. The distance of the outermost nozzles on the boom must not exceed 3/4 the length of the wingspan
or rotor.
2. Nozzles must always point backward, parallel with the air stream and never be pointed downwards
more than 45 degrees. Comply with all State regulations where applicable.
Importance of Droplet Size
The most effective way to reduce drift potential is to apply large droplets. The best drift management
strategy is to apply the largest droplets that provide sufficient coverage and control. Applying larger
droplets reduces drift potential, but will not prevent drift if applications are made improperly, or under
unfavorable environmental conditions (read the following sections on "Wind", "Temperature and
Humidity", and "Temperature Inversions").
Controlling Droplet Size
• Volume: Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with the
higher rated flows produce larger droplets.
• Pressure: Use the lower spray pressures listed for the nozzle. Higher pressure reduces droplet size
and does not improve canopy penetration. When higher flow rates are needed, use higher flow rate
nozzles instead of increasing spray pressure.
• Number of nozzles: Use the minimum number of nozzles that will provide uniform coverage.
• Nozzle orientation: Orienting nozzles so that the spray is released backwards, parallel to the
airstream, will produce larger droplets than other orientations. Significant deflection from the
horizontal will reduce droplet size and increase drift potential.
• Nozzle type: Use a nozzle type that is deSigned for the intended application. With most nozzle
types, narrower spray angles produce larger droplets. Consider using low-drift nozzles. Solid stream
nozzles oriented straight back produce larger droplets than other nozzle types.
Master Label 524-454 Page 16 of 139 Submitted August 26. 2009

" ) )
I. MAIN LABEL FOR FOOD CROP USES
• Boom length: For some use patterns, reducing the effective boom length to less than 3/4 of the
wingspan or rotor length may further reduce drift without reducing swath width.
• Application height: Applications must not be made at a height greater than 10 feet above the top of
the largest plants unless a greater height is required for aircraft safety. Making applications at the
lowest height that is safe reduces the exposure of the droplets to evaporation and wind.
Swath Adjustment
When applications are made with a crosswind, the swath will be displaced downwind. Therefore, on the
up and downwind edges of the field, the applicator must compensate for this displacement by adjusting
the path of the aircraft upwind. Increase the swath adjustment distance with increasing drift potential
(higher wind speed, smaller droplets, etc.).
Wind
Drift potential is lowest between wind speeds of 2 to 10 mph. However, many factors, including droplet
size and equipment type, determine drift potential at any given wind speed. Application must be avoided
when wind speeds are below 2 mph due to variable wind direction and high inversion potential. NOTE:
Local terrain can influence wind patterns. Every applicator must be familiar with local wind patterns and
how they affect drift.
Temperature and Humidity
When making applications in low relative humidity, set up equipment to produce larger droplets to
compensate for evaporation. Droplet evaporation is most severe when conditions are both hot and dry.
Temperature Inversions
Applications must not occur during a temperature inversion because drift potential is high. Temperature
inversions restrict vertical air mixing, which causes small suspended droplets to remain in a concentrated
cloud. This cloud can move in unpredictable directions due to the light variable winds common during
inversions. Temperature inversions are characterized by increasing temperatures with altitude and are
common on nights with limited cloud cover and light to no wind. They begin to form as the sun sets and
often continue into the morning. Their presence can be indicated by ground fog; however, if fog is not
present, the movement of smoke produced by a ground source or an aircraft smoke generator can also
identify temperature inversions. Smoke that layers and moves laterally in a concentrated cloud (under low
wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates
good vertical air mixing.
Sensitive Areas
Apply this product only when the potential for drift to adjacent sensitive areas (e.g. residential areas,
bodies of water, known habitat for threatened or endangered species, non-target crops) is minimal (e.g.
when wind is blowing away from the sensitive areas).
Avoid direct application to any body of water.
Aircraft Maintenance
Thoroughly wash aircraft, especially landing gear, after each day of spraying to remove residues of this
product accumulated during spraying or from spills. PROLONGED EXPOSURE OF THIS PRODUCT TO
UNCOATED STEEL SURFACES MAY RESULT IN CORROSION AND POSSIBLE FAILURE OF THE
PART. LANDING GEAR IS MOST SUSCEPTIBLE. Maintaining an organic coating (paint) that meets
aerospace specification MIL-C-38413 may help prevent corrosion.
8.2 Ground Broadcast Equipment
Master Label 524-454 Page 17 of 139 Submitted August 26, 2009

I. MAIN LABEL FOR FOOD CROP USES
Apply this product at the appropriate rate in 3 to 40 gallons of water per acre when making a broadcast
application using ground application equipment unless otherwise directed on this label or on
supplemental labeling or Fact Sheets for this product. As the weed density increases, increase the spray
volume towards the upper end of this range to ensure complete coverage. Carefully select proper nozzles
to avoid generating a fine mist. For best results with ground application equipment, use flat spray
nozzles. Check spray pattern for uniform distribution.
8.3 Hand-Held or Backpack Equipment
Apply to foliage of vegetation to be controlled. For best results, spray coverage must be uniform and
complete. Use coarse sprays only. For applications made on a spray-to-wet basis, do not spray to the
point of run-off. For appropriate spray concentrations and timing, refer to the "ANNUAL WEEDS-HAND
HELD OR BACKPACK EQUIPMENT" section of this product label.
8.4 Selective Equipment
This product may be diluted in water and applied using a shielded sprayer, hooded sprayer, wiper
applicator or sponge bar to weeds listed on this label growing in any non-crop site listed on this label.
In cropping systems, a shielded sprayer, hooded sprayer, or wiper applicator may be used in-between
rows of crop plants (row middles). A wiper applicator may be used over the top of crops only when
specifically directed on this label. Selective equipment must be capable of preventing all contact of the
herbicide solution with the crop and operated without spray-mist escape, leakage, or dripping of the
herbicide solution onto the crop.
AVOID CONTACT OF THIS HERBICIDE WITH DESIRABLE VEGETATION.
Contact of this product with desirable vegetation may result in unwanted plant damage or destruction.
Crop injury may occur when the foliage of treated weeds comes into contact with leaves of the crop. Do
not apply this product when crop leaves are growing in direct contact with weeds to be treated. Droplets,
mist, foam or splatter of the herbicide solution settling onto desirable vegetation may result in
discoloration, stunting or destruction.
Better results may be obtained when more of the weed is exposed to the herbicide solution. Weeds not
contacted by the herbicide solution will not be affected. This may occur in dense clumps, severe
infestations or when the height of the weeds varies so that not all weeds are contacted. In these
instances, repeat treatment may be necessary.
Shielded and Hooded Sprayers
This product, when applied at rates specified on this label using a shielded or hooded sprayer according
to the directions described in this section, will control those weeds listed in the "ANNUAL WEEDS RATE
SECTION" and "PERENNIAL WEEDS RATE SECTION" of this label.
A hooded sprayer is a type of shielded sprayer where the spray pattern is fully enclosed, including the
top, sides, front and back, thereby shielding the crop from the spray solution. Adjust the shields on these
sprayers to protect desirable vegetation. When applying around crops grown on raised beds, ensure that
the hood is capable of completely enclosing the spray pattern. If necessary, extend the front and rear
flaps of the hooded sprayer downward to reach the ground in deep furrows. USE EXTREME CARE TO
AVOID CONTACT OF THIS HERBICIDE WITH DESIRABLE VEGETATION.
This equipment must be configured and operated in a manner that minimizes bouncing and avoids raising
the hood up off the ground surface at any time. If the hood is raised, spray particles may escape and
come into contact with the crop, causing damage or destruction of the crop. Avoid operating this
equipment on rough or sloping terrain where the spray hood might be raised up off the ground surface.
Master Label 524-454 Page 18 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
Use hoods designed to minimize excessive dripping or run-off down the inside of the hood, such as a
single, low pressure, low-drift, flat-fan nozzle with an 80 to 95 degree spray angle positioned at the top
center of the hood, with a spray volume of 20-30 gallons per acre.
The following procedures can reduce the potential for crop injury when using a hooded sprayer:
• Spray hood must be operated on the ground or skimming across the ground surface.
• Leave at least an 8-inch untreated strip over the drill row. (For example, if the crop row width is 38
inches, make the maximum width of the spray hood 30 inches.)
• Operate at ground speeds of no greater than 5 miles per hour to avoid bouncing of the spray hood.
• Apply when wind speed is 10 miles per hour or less.
• Use low-drift nozzles that provide uniform coverage within the treated area.
Crop injury may occur when foliage of treated weeds comes into direct contact with leaves of the crop.
Do not apply this product when leaves of the crop are growing in direct contact with weeds to be treated.
Droplets, mist, foam or splatter of the herbicide solution settling onto desirable vegetation may result in
discoloration, stunting or destruction.
Wiper Applicator
A wiper applicator is a device that physically wipes this product directly onto the weed. Equipment must
be designed, maintained and operated to prevent the herbicide solution from contacting desirable
vegetation.
Adjust the height of the wiper applicator to ensure adequate contact with weeds and so that the wiper
contact point is at least 2 inches above the desirable vegetation. Better results can be obtained when
more of the weed is exposed to the herbicide solution and weeds are a minimum of 6 inches above the
desirable vegetation. Weeds not contacted by the herbicide solution will not be affected. Poor contact
may occur when weeds are growing in dense clumps, in severe weed infestations or when weed height
varies dramatically. In these situations, repeat treatments may be necessary.
Operate this equipment at a ground speed of no greater than 5 miles per hour. Performance may be
improved by reducing speed in areas of heavy weed infestations to provide adequate wiper saturation
with the herbicide solution. Better results may be obtained when two applications are made in opposite
directions.
Droplets, mist, foam or splatter of the herbicide solution settling onto desirable vegetation may result in
discoloration, stunting or destruction. Avoid leakage or dripping onto desirable vegetation. Keep wiping
surfaces clean. Be aware that on sloping ground the herbicide solution may migrate, causing dripping on
the lower end and drying of the wicks on the upper end of the wiper applicator.
Do not use wiper applicator when weeds are wet.
Mix only the amount of this product to be used during a 1-day period, as reduced product performance
may result from use of solutions held in storage. Clean wiper parts promptly by thoroughly flushing with
water.
Do not add surfactant to the herbicide solution when using a wiper applicator.
For Rope or Sponge Wick Applicator - use solutions ranging from 33 to 75 percent of this product in
water.
For Panel Applicator - use solutions ranging from 33 to 100 percent of this product in water.
8.5 Injection Systems
Master Label 524-454 Page 19 of 139 Submitted August 26, 2009

) ~\ Ot \~O
I. MAIN LABEL FOR FOOD CROP USES
This product may be used in aerial or ground injection spray systems. It may be used as a liquid
concentrate or diluted prior to injecting into the spray stream. Do not mix this product with the
concentrate of other products for use in injection systems.
8.6 Controlled Droplet Applicator (CDA)
The amount of this product applied per acre using a vehicle-mounted controlled droplet applicator (CDA)
must be no less than the amount specified on this label for application using conventional broadcast
application equipment. Apply the appropriate amount of this product in 2 to 15 gallons of water per acre
when using a vehicle-mounted CDA.
For control of annual weeds using a hand-held CDA, apply a 20-percent solution of this product at a flow
rate of 2 fluid ounces per minute and a walking speed of 1.5 miles per hour (1 quart per acre). For the
control of perennial weeds, apply a 20 to 40-percent solution of this product at a flow rate of 2 fluid
ounces per minute and a walking speed of 0.75 miles per hour (2 to 4 quarts per acre).
Controlled droplet applicators produce a spray pattern that is not easily visible. Extreme care must be
taken to avoid spray or drift onto the foliage or any other green tissue of desirable vegetation, as damage
or destruction of the plant may result.
9.0 ANNUAL AND PERENNIAL CROPS
NOTE: THIS SECTION GIVES DIRECTIONS THAT APPLY TO ALL CROPS LISTED
ALPHABETICALLY IN THE SECTIONS THAT FOLLOW. SEE THE INDIVIDUAL CROP SECTIONS FOR
SPECIFIC INSTRUCTIONS, PREHARVEST INTERVALS, AND ADDITIONAL PRECAUTIONS AND
RESTRICTIONS.
See the "ROUNDUP READY CROPS" section of this label, or separately published supplemental labeling
for this product for instructions on application in Roundup Ready crops.
TYPES OF APPLICATION: Chemical Fallow, Preplant Fallow Beds, Preplant, At-Planting,
Preemergence, Hooded Sprayer in Row-Middles, Shielded Sprayer in Row-Middles, Wiper Applicator in
Row-Middles, Post-Harvest
USE INSTRUCTIONS: Apply this product during fallow intervals preceding planting, prior to planting or
transplanting, at-planting, or preemergence to annual and perennial crops listed on this label, except
where specifically limited. For any crop not listed on this label, application must be made at least 30 days
prior to planting. Unless otherwise specified, apply this product according to the rates listed in the
"ANNUAL WEEDS RATE SECTION", "PERENNIAL WEEDS RATE SECTION", and WOODY BRUSH
AND TREES RATE SECTION" of this label. Application rates specified on this label for the ,control of
tough weeds, or those specified on separate supplemental labeling for this product, supersede the rates
in the "ANNUAL WEEDS RATE SECTION", "PERENNIAL WEEDS RATE SECTION" and "WOODY
BRUSH AND TREES RATE SECTION" of this label. Additional information on the control of tough weeds
can be found in Fact Sheets for this product.
Repeat applications may be made up to a maximum of 8 quarts of this product per acre per year.
Hooded sprayers and wiper applicators capable of preventing all crop contact with the herbicide solution
may be used in mulched or unmulched row middles after crop establishment. Wiper applicators may be
used over the top of crops to control tall weeds only when specifically directed in the individual crop
sections that follow. Refer to the "SELECTIVE EQUIPMENT" section of this label for essential
precautions regarding crop injury. Crop injury is possible with these types of application, and shall be the
sale responsibility of the applicator.
All treatments described in the sections that follow may be made using aerial application equipment
where appropriate, provided that the applicator complies with the precautions and restrictions specified
on this label and on all supplemental labeling published separately for this product. See the
Master Label 524-454 Page 20 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
"APPLICATION EQUIPMENT AND TECHNIQUES" section of this label for additional information on
aerial application and procedures on avoiding spray drift that may cause injury to any vegetation not
intended for treatment. Use of appropriate buffer zones will help prevent injury to adjacent vegetation.
TANK MIXTURES: This product may be tank-mixed with other herbicides to provide residual weed
control, a broader weed control spectrum or an alternate mode of action. Always read and follow label
directions for all products in the tank mixture. Use all products according to rates and timing specified on
the label. Some tank-mix products have the potential to cause crop injury. Read all labels for products
used in the tank mixture prior to use to determine the potential for crop injury. Always predetermine the
compatibility of tank-mix products together in the carrier by mixing small proportional quantities in
advance. A tank mixture of this product with other herbicides may cause incompatibility, antagonism, or a
reduction in product efficacy. [INSERT COMPANY NAME] has not tested all tank-mix product
formulations for compatibility, antagonism or performance. Buyer and all users are responsible for any
and all loss or damage in connection with the use or handling of mixtures of this product with herbicides
or other materials that are not specifically identified on this labeling, or in separate supplemental labeling
or Fact Sheets for this product. See the "MIXING" section of this label for more information on tank
mixtures.
PRECAUTIONS, RESTRICTIONS: Avoid contact of this herbicide with foliage, green shoots or stems,
bark, exposed roots (including those emerging from plastic mulch), or fruit of crops, as severe crop injury
or destruction may result. When making at-planting and preemergence applications, application must be
made before crop emergence to avoid severe crop injury. Broadcast application made at emergence will
result in injury or death of emerged seedlings. Apply before seed germination in coarse sandy soils to
further minimize the risk of injury. Unless otherwise specified on this label, treatment with selective
equipment, including wiper applicators and hooded sprayers, must be made at least 14 days prior to
harvest. Post-harvest or fallow application must be made at least 30 days prior to planting any crops not
listed on this label. See "APPLICATION EQUIPMENT AND TECHNIQUES" section of this label for
additional information.
In crops where spot treatment is allowed, do not treat more than 10 percent of the total field to be
harvested. Crop sprayed in treated area will be killed. Take care not to spray or allow spray to drift
outside the target area in order to avoid unwanted crop destruction.
Do not harvest or feed treated vegetation for 8 weeks following broadcast postemergence application,
unless otherwise specified.
Observe the maximum application rates stated throughout this label. Maximum application rates apply to
the use of this product combined with the use of any and all other herbicides containing glyphosate as the
active ingredient, whether applied separately or as mixtures. Calculate the application rates (glyphosate
acid equivalents) and ensure that the total use of this and other glyphosate-containing products does not
exceed the stated maximum rate. See the "PRODUCT INFORMATION" section of this label for more
information on Maximum Application Rates.
9.1 Cereal and Grain Crops
LABELED CROPS: Barley, Buckwheat, Millet (pearl, proso), Oats, Rice, Rye, Quinoa, Teff, Teosinte,
Triticale, Wheat (all types), Wild rice
TYPES OF APPLICATION: Those listed in Section 9.0 plus Red Rice Control Prior to Planting Rice, Spot
Treatment (Except Rice), Wiper Applicator (Feed Barley and Wheat Only), Preharvest (Feed Barley and
Wheat Only)
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting of cereal crops, but
prior to crop emergence.
Master Label 524-454 Page 21 of 139 Submitted August 26, 2009

I. MAIN LABEL FOR FOOD CROP USES
TANK MIXTURES: In wheat, a tank-mix with Aim may be used.
Red Rice Control Prior to Planting Rice
)
USE INSTRUCTIONS: Apply 1.5 quarts of this product in 5 to 10 gallons of water per acre. Flush fields
prior to application to obtain uniform germination and stand of red rice. Make application when the
majority of the red rice plants are at the 2-leaf stage and no more than 4 inches tall. Red rice plants with
less than 2 true leaves may be only partially controlled.
PRECAUTIONS, RESTRICTIONS: Avoid spraying during conditions of low humidity, as reduced control
may result. Do not treat rice fields or levees when the fields contain floodwater. Do not flood treated
fields for 8 days following application.
Spot Treatment (Except Rice)
USE INSTRUCTIONS: This product may be applied as a spot treatment in cereal crops, except rice.
Apply this product before heading in small grains.
PRECAUTIONS, RESTRICTIONS: Do not treat more than 10 percent of the total field area to be
harvested. Crop sprayed in treated area will be killed. Take care not to spray or to allow spray to drift
outside target area in order to avoid unwanted crop destruction.
Wiper Applicator (Feed Barley and Wheat Only)
USE INSTRUCTIONS: This product may be applied over the top of feed barley and wheat using a wiper
applicator. To control common rye or cereal rye, apply after the weeds have headed and achieved
maximum growth. See additional instructions on the use of wiper applicators in the "APPLICATION
EQUIPMENT AND TECHNIQUES" section of this label.
PRECAUTIONS, RESTRICTIONS: Allow at least 35 days between application and harvest. Do not use
roller applicators.
Preharvest (Feed Barley and Wheat Only)
USE INSTRUCTIONS: This product provides weed control when applied prior to harvest of feed barley
or wheat. For feed barley, apply after the hard-dough stage when the grain contains 20 percent moisture
or less. For wheat, apply after the hard-dough stage when the grain contains 30 percent moisture or less.
Stubble may be grazed immediately after harvest.
For ground application, apply this product in 10 to 20 gallons of water per acre. For aerial application,
apply this product in 3 to 10 gallons of water per acre.
PRECAUTIONS, RESTRICTIONS: Do not apply more than 1 quart of this product per acre. Allow 7 days
between application and harvest or grazing. Pre harvest application on barley or wheat grown for seed
could result in a reduction in germination or vigor. Buyer and all users are responsible for any and all loss
or damage in connection with the preharvest use of this product on barley or wheat grown for seed.
Post-Harvest
USE INSTRUCTIONS: This product may be applied for weed control after harvest of cereal crops.
Higher rates may be required to control large weeds that were growing in the crop at the time of harvest.
Tank mixtures with 2,4-D or dicamba may be used. Ensure that the specific product being used is
labeled for weed control following harvest of cereal crops. Read and follow label directions of all products
in the tank mixture.
PRECAUTIONS, RESTRICTIONS: Allow a minimum of 7 days between treatment and harvest or feeding
of treated vegetation. Application must be made at least 30 days prior to planting any crop not listed on
this label.
9.2 Corn
Master Label 524-454 Page 22 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
TYPES OF CORN: Field corn, Popcorn, Seed corn, Silage corn, Sweet corn
TYPES OF APPLICATION: Those listed in Section 9.0 plus Spot Treatment, Preharvest
For use directions with corn hybrids with Roundup Ready 2 Technology (including Roundup Ready Corn
2 and products displaying the Roundup 2 Technology logo), see the "ROUNDUP READY CROPS"
section of this label.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied alone or in a tank-mix before, during or after planting
corn, but prior to crop emergence.
TANK MIXTURES: This product may be tank-mixed with the following products to provide residual weed
control, a broader weed control spectrum or an alternate mode of action. Ensure that the specific product
being used is labeled for application prior to the planting or emergence of corn. Read and follow label
directions for all products in the tank mixture. Apply these tank mixtures in 10 to 20 gallons of water or 10
to 60 gallons of nitrogen solution per acre.
[Insert active ingredient(s) or brand name of product(s} containing the fol/owing active ingredients
that, at the time of printing, are registered for use prep/ant, at-planting and/or pre emergence to
corn:
2,4-0, acetochlor, alachlor, atrazine, carfentrazone-ethyl, clopyralid, dicamba, diflufenzopyr,
dimethenamid, dimethenamid-p, flufenacet, flumetsulam, flumiclorac pentyl ester, isoxaflutole,
linuron, metolachlor, s-metolachlor, metribuzin, pendimethalin, simazine
Aim, Aim EC, Axiom, Balance, Balance PRO, Banvel, Bicep MAGNUM, Bicep II MAGNUM,
Bicept Lite II Magnum, Bullet, Cinch, Cinch ATZ, Clarity, Define, Degree, Degree Xtra, Distinct,
Dual MAGNUM, Dual II MAGNUM, Epic, Frontier, FulTime, Guardsman, Guardsman MAX,
Harness, Harness Xtra, Harness Xtra 5.6L, Hornet, Keystone, Keystone LA, Lariat, Leadoff,
Linex, Lorox, Marksman, Me-too-Lachlor II, Micro-Tech, Outlook, Prowl, Python, Python II,
Radius, Resolve, Resource, Shark, Simazine, Stalwart, Stalwart C, Stalwart Xtra, Surpass,
TopNotch]
For tough-to-control annual weeds such as fall panicum, barnyardgrass, crabgrass, shattercane and
broad leaf signalgrass up to 2 inches tall, and Pennsylvania smartweed up to 6 inches tall, apply this
product at 2 pints per acre in these tank mixtures. For other annual weeds listed on this label, apply 1.5 to
2 pints of this product per acre when weeds are less than 6 inches tall, and 2 to 3 pints per acre when
weeds are over 6 inches tall. When using nitrogen solutions as the carrier, application rate may need to
be increased for acceptable weed control.
PRECAUTIONS, RESTRICTIONS: Application of 2,4-0 or dicamba must be made at least 7 days prior to
planting corn. Refer to individual tank-mix product label for restrictions and precautions; use according to
the most restrictive precautionary statements for each product in the tank mixture.
In Southern states, do not apply this product in nitrogen solutions to tough-to-control grasses such as
barnyardgrass, fall panicum, broad leaf signalgrass, annual ryegrass and any perennial weeds. This area
includes Illinois and Indiana south of Route 50, Alabama, Arkansas, Delaware, Florida, Georgia,
Kentucky, Louisiana, Maryland, Mississippi, New Jersey, North Carolina, Oklahoma, South Carolina,
Tennessee, Texas, Virginia and West Virginia.
Hooded Sprayer
USE INSTRUCTIONS: This product may be applied using a hooded sprayer for weed control in-between
rows of corn. Only hooded sprayers that completely enclose the spray pattern may be used. See
Master Label 524-454 Page 23 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
additional instructions for the use of hooded sprayers in the "APPLICATION EQUIPMENT AND
TECHNIQUES" section of this label.
PRECAUTIONS, RESTRICTIONS: Corn must be at least 12 inches tall, measured without extending
leaves. Contact of this product in any manner to any vegetation to which treatment is not intended may
cause damage. Such damage shall be the sole responsibility of the applicator. Do not apply more than 1
quart of this product per acre for each hooded sprayer application and no more than 3 quarts per acre per
year total.
Spot Treatment
USE INSTRUCTIONS: This product may be applied as a spot treatment prior to silking of corn.
PRECAUTIONS, RESTRICTIONS: Do not treat more than 10 percent of the total field area to be
harvested. Crop sprayed in the treated area will be killed. Take care not to spray or to allow spray to drift
outside target area to avoid unwanted crop destruction.
Preharvest
USE INSTRUCTIONS: Make application at 35 percent grain moisture or less. Ensure that maximum
kernel fill is complete and the corn is physiologically mature (black layer formed). For ground application,
apply up to 3 quarts of this product per acre. For aerial application, apply up to 2 quarts of this product
per acre.
PRECAUTIONS, RESTRICTIONS: Allow a minimum of 7 days between application and harvest
Preharvest application on corn grown for seed could result in a reduction in germination or vigor. Buyer
and all users are responsible for any and all loss or damage in connection with the preharvest use of this
product on corn grown for seed.
Post-Harvest
USE INSTRUCTIONS: This product may be applied for weed control after harvest of corn. Higher rates
may be required to control large weeds that were growing in the crop at the time of harvest. Tank
mixtures with 2,4-0 or dicamba may be used. Ensure that the specific product being used is labeled for
post-harvest application in corn. Read and follow label directions of all products in the tank mixture.
PRECAUTIONS, RESTRICTIONS: Allow a minimum of 7 days between treatment and harvest or feeding
of treated vegetation. Application of this product must be made at least 30 days prior to planting any crop
not listed on this label. Refer to individual tank-mix product label for restrictions and precautions; use
according to the most restrictive precautionary statements for each product in the tank mixture.
9.3 Cotton
TYPES OF APPLICATION: Those listed in Section 9.0 plus Selective Equipment, Spot Treatment,
Preharvest
For use directions with Roundup Ready cotton and Roundup Ready Flex cotton, see the "ROUNDUP
READY CROPS" section of this label.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting cotton, but prior to
crop emergence.
TANK MIXTURES: This product may be tank-mixed with 2,4-0 and Clarity and applied prior to planting
only. This product may also be tank-mixed with the following products and applied prior to crop
emergence. Ensure that the specific product being used is labeled for application prior to planting or the
emergence of cotton. Read and follow label directions for all products used in the tank mixture. Apply
these tank mixtures in 10 to 20 gallons of water per acre.
Master Label 524-454 Page 24 of 139 Submitted August 26, 2009

I. MAIN LABEL FOR FOOD CROP USES
[Insert active ingredient(s) or brand name of product(s} containing the following active ingredients
that, at the time of printing, are registered for use preplant, at-planting and/or preemergence to
cotton:
2,4-D, clomazone, dicamba, diuron, flumioxazin, fluometuron, fomesafen, metolachlor, s
metolachlor, pendimethalin, norflurazon, prometyrn, pyrithiobac-sodium
Caparol, Clarity, Command, Cotoran, Cotton-Pro, Direx, Dual MAGNUM, Dual II MAGNUM,
Karmex, Meturon, PARRLAY, Prowl, Prowl H20, Reflex, Staple, Stalwart, Valor, Zaria I]
PRECAUTIONS, RESTRICTIONS: Refer to individual tank-mix product labels for restrictions and
precautions; use according to the most restrictive precautionary statements for each product in the
mixture.
Selective Equipment
USE INSTRUCTIONS: This product may be applied using a hooded sprayer, a shielded sprayer or a
wiper applicator over the top of cotton. See additional instructions on the use of this selective equipment
in the "APPLICATION EQUIPMENT AND TECHNIQUES" section of this label.
PRECAUTIONS, RESTRICTIONS: Allow at least 7 days between application and harvest.
Spot Treatment
USE INSTRUCTIONS: This product may be applied in cotton as a spot treatment prior to boll opening.
PRECAUTIONS, RESTRICTIONS: Do not treat more than 10 percent of the total field area to be
harvested. Crop sprayed in the treated area will be killed. Take care not to spray or to allow spray to drift
outside target area to avoid unwanted crop destruction.
Preharvest
USE INSTRUCTIONS: This product provides weed control and cotton re-growth inhibition when applied
prior to harvest of cotton. For weed control, apply at rates given in the "ANNUAL WEEDS RATE
SECTION" and "PERENNIAL WEEDS RATE SECTION" of this label. For cotton re-growth inhibition,
apply 1 pint to 2 quarts of this product per acre.
Do not apply more than 2 quarts of this product for pre harvest application. Apply after sufficient bolls
have developed to produce the desired yield. Application made prior to this time could affect maximum
yield potential.
TANK MIXTURES: This product may be tank mixed with DEF 6, Folex, Ginstar, or Prep to provide
additional enhancement of cotton leaf-drop. Read and follow label directions for all products used in the
tank mixture.
PRECAUTIONS, RESTRICTIONS: Allow a minimum of 7 days between application and harvest.
Pre harvest application on cotton grown for seed could result in a reduction in germination or vigor. Buyer
and all users are responsible for any and all loss or damage in connection with the preharvest use of this
product on cotton grown for seed. Refer to individual tank-mix product label for restrictions and
precautions; use according to the most restrictive precautionary statements for each product in the tank
mixture. DO NOT ADD ADDITIONAL SURFACTANT OR ADDITIVES CONTAINING SURFACTANT TO
THIS PRODUCT FOR PREHARVEST APPLICATION TO COTTON.
9.4 Fallow Systems
This product may be applied during the fallow period prior to planting or emergence of any crop listed on
this label. For any crop not listed on this label, application must be made at least 30 days prior to planting.
TYPES OF APPLICATION: Chemical Fallow, Preplant Fallow Beds, Aid-to-Tillage
Master Label 524-454 Page 25 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
Chemical Fallow
USE INSTRUCTIONS: This product may be used as a substitute for tillage to control annual weeds in
fallow fields. Broadcast or spot treatment application will also control or suppress many perennial weeds
in fallow fields. Tank-mix this product with 2,4-0 or dicamba for a broader weed control spectrum. Aerial
application of up to 2 quarts per acre may be made onto fallow sites where there is sufficient buffer to
prevent injury due to drift onto adjacent crops.
PRECAUTIONS, RESTRICTIONS: Refer to individual tank-mix product labels for restrictions and
precautions; use according to the most restrictive precautionary statements for each product in the tank
mixture. Some crap injury may occur if dicamba is applied within 45 days of planting.
Preplant Fallow Beds
USE INSTRUCTIONS: This product will control weeds listed in the "ANNUAL WEEDS RATE SECTION",
"PERENNIAL WEEDS RATE SECTION" and "WOODY BRUSH AND TREES RATE SECTION" of this
label prior to planting.
TANK MIXTURES: Use 12 fluid ounces of this product, plus 2 to 3 fluid ounces of Goal 2XL, per acre to
control the following weeds up to the maximum height or length indicated: 3 inches - common
cheeseweed, chickweed, groundsel; 6 inches - London rocket, shepherd's-purse.
Use 16 fluid ounces of this product, plus 2 to 3 fluid ounces of Goal 2XL, per acre to control the following
weeds up to the maximum height or length indicated: 6 inches - common cheeseweed, groundsel,
marestail (Conyza canadensis), 12 inches - chickweed, London rocket, shepherd's-purse.
Aid-to-Tillage
USE INSTRUCTIONS: This product may be used in conjunction with tillage practices in fallow systems or
preplant to crops listed on this label to control downy brame, cheat, volunteer wheat, tansy mustard and
foxtail. Apply 12 fluid ounces of this product in 3 to 10 gallons of water per acre before weeds are 6
inches in height. Application must be followed by conventional tillage practices no later than 15 days after
treatment and before re-growth occurs. Allow at least 1 day after application before tillage.
PRECAUTIONS, RESTRICTIONS: Tank mixtures with residual herbicides may result in reduced
performance of this product.
9.S Grain Sorghum (Milo)
TYPES OF APPLICATION: Those listed in Section 9.0 plus Spot Treatment, Wiper Applicator, Preharvest
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied alone or in a tank-mixture before, during or after
planting grain sorghum, but prior to crop emergence.
TANK MIXTURES: This product may be tank-mixed with the products listed below. Ensure that the
specific product being used is labeled for application prior to planting or emergence of grain sorghum.
Read and follow label directions for all products used in the tank mixture. Apply these tank mixtures in 10
to 20 gallons of water or 10 to 60 gallons of nitrogen solution per acre.
[Insert active ingredient(s) or brand name of product(s) containing the following active ingredients
that, at the time of printing, are registered for use preplant, at-planting and/or preemergence to
grain sorghum:
atrazine, alachlor, metolachlor, s-metolachlor
Bicep II MAGNUM, Bullet, Dual II MAGNUM, INTRRO, Lariat, Micro-Tech]
Master Label 524-454 Page 26 of 139 Submitted August 26, 2009

I. MAIN LABEL FOR FOOD CROP USES
For tough-to-control annual weeds such as fall panicum, barnyardgrass, crabgrass, shattercane and
broad leaf signalgrass up to 2 inches tall, and Pennsylvania smartweed up to 6 inches tall, apply 2 pints of
this product per acre in a tank mixture with one of the products listed above.
For control of other annual weeds listed on this label, apply 1.5 to 2 pints of this product per acre when
weeds are less than 6 inches tall, and 2 to 3 pints per acre when weeds are over 6 inches tall. When
using nitrogen solutions as the carrier, the use rate may need to be increased to achieve adequate weed
control.
PRECAUTIONS, RESTRICTIONS: Refer to individual tank-mix product label for restrictions and
precautions; use according to the most restrictive precautionary statements for each product in the tank
mixture. .
Spot Treatment, Wiper Applicator
USE INSTRUCTIONS: This product may be applied as a spot treatment in grain sorghum before
heading. This product may be applied over the top of grain sorghum with a wiper applicator to control or
suppress tall weeds. See additional instructions on the use of wiper applicators in the "APPLICATION
EQUIPMENT AND TECHNIQUES" section of this label.
PRECAUTIONS, RESTRICTIONS: For spot treatment, do not treat more than 10 percent of the total field
area to be harvested. Crop sprayed in treated area will be killed. Take care not to spray or to allow spray
to drift outside target area to avoid unwanted crop destruction.
When applied using a wiper applicator, allow at least 40 days between application and harvest. Do not
use roller applicators. Do not feed or graze treated grain sorghum fodder. Do not ensile treated
vegetation.
Hooded Sprayer
USE INSTRUCTIONS: This product may be applied using a hooded sprayer for weed control in-between
rows of grain sorghum. Only hooded sprayers that completely enclose the spray pattern may be used.
See additional instruction for the use of hooded sprayers in the "APPLICATION EQUIPMENT AND
TECHNIQUES" section of this label.
PRECAUTIONS, RESTRICTIONS: Grain sorghum must be at least 12 inches tall, measured without
extending leaves. Treat before grain sorghum sends tillers between the drill rows. If tillers are sprayed
with this herbicide, the main plant may be damaged or destroyed. Contact of this product in any manner
to any vegetation to which treatment is not intended may cause damage. Such damage shall be the sole
responsibility of the applicator. Do not graze or feed grain sorghum forage or fodder following application
of this product with a hooded sprayer. Do not apply more than 1 quart of this product per acre per
hooded sprayer application and no more than 3 quarts per acre per year total.
Preharvest
USE INSTRUCTIONS: This product may be applied prior to harvest after sorghum grain has reached 30
percent grain moisture or less.
PRECAUTIONS, RESTRICTIONS: Do not apply more than 2 quarts of this product per acre. As with
other herbicides that cause sudden plant death, avoid pre harvest application of this product to milo
infected with charcoal rot as lodging can occur. Allow a minimum of 7 days between application and
harvest of grain sorghum. Preharvest application on sorghum grown for seed could result in a reduction in
germination or vigor. Buyer and all users are responsible for any and all loss or damage in connection
with the preharvest use of this product on sorghum grown for seed. Preharvest application of this product
on grain sorghum (milo) is not registered for use in California.
Post-Harvest
Master Label 524-454 Page 27 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
USE INSTRUCTIONS: This product may be applied for weed control after harvest of grain sorghum.
Higher rates may be required to control large weeds that were growing in the crop at the time of harvest.
Tank mixtures with 2,4-D or dicamba may be used. Ensure that the specific product being used is
registered for post-harvest application in grain sorghum (milo). Read and follow label directions of all
products in the tank mixture.
This product may be applied to grain sorghum (milo) stubble following harvest to suppress or control re
growth. Apply 1 quart of this product per acre for control, or 1.5 pints of this product per acre for
suppression.
PRECAUTIONS, RESTRICTIONS: Allow a minimum of 7 days between treatment and harvest or feeding
of treated vegetation. Application must be made at least 30 days prior to planting any crop not listed on
this label. Refer to each individual tank-mix product label for restrictions and precautions; use according
to the most restrictive precautionary statements for each product in the tank mixture.
9.6 Herbs and Spices
LABELED CROPS: Allspice, Angelica, Star anise, Annatto (seed), Balm, Basil, Borage, Burnet,
Camomile, Caper buds, Caraway, Black caraway, Cardamom, Cassia bark, Cassia buds, Catnip, Celery
seed, Chervil (dried), Chive, Chinese chive, Cinnamon, Clary, Clove buds, Coriander leaf (cilantro or
chinese parsley), Coriander seed (cilantro), Costmary, Culantro (leaf), Culantro (seed), Cumin, Curry
(leaf), Dill (dillweed), Dill (seed), Epazote, Fennel seed (common and Florence), Fenugreek, White ginger
flower, Grains of paradise, Horehound, Hyssop, Juniper berry, Lavender, Lemongrass, Lovage (leaf and
seed), Mace, Marigold, Marjoram (including oregano), Mexican oregano, Mioga flower, Mustard (seed),
Nasturtium, Nutmeg, Parsley (dried), Pennyroyal, Pepper (black and white), Pepper leaves, Peppermint,
Perilla, Poppy (seed), Rosemary, Rue, Saffron, Sage, Savory (summer and winter), Spearmint, Stevia
leaves, Sweet bay, Tansy, Tarragon, Thyme, Vanilla, Wintergreen, Woodruff, Wormwood
TYPES OF APPLICATION: Those listed in Section 9.0 plus Spot Treatment (Peppermint and Spearmint
Only), Wiper Applicator (Peppermint and Spearmint Only)
PRECAUTIONS, RESTRICTIONS: This product could cause crop injury when applied prior to
transplanting or direct-seeding crops into plastic mulch. Remove residual product from the plastic prior to
planting with a single D.S-inch application of water, either by natural rainfall or by irrigation. Ensure that
the washwater flushes off the plastic mulch and does not enter transplant holes.
Spot Treatment, Wiper Applicator (Peppermint and Spearmint Only)
USE INSTRUCTIONS: This product may be applied as a spot treatment in peppermint or spearmint, or
over the top of peppermint and spearmint with a wiper applicator. Apply spot treatment on a spray-to-wet
basis using hand-held equipment, such as a backpack sprayer, pump-up pressure sprayer, a hand-gun,
hand-wand or any other hand-held or motorized spray equipment used to direct the spray solution to a
limited area. See additional instructions on the use of wiper applicators in the "APPLICATION
EQUIPMENT AND TECHNIQUES" section of this label.
PRECAUTIONS, RESTRICTIONS: Application may be repeated on the same area at 3D-day intervals.
Allow at least 7 days between application and harvest. For spot treatment application, do not treat more
than 10 percent of the total field area to be harvested. Crop sprayed in the treated area will be killed.
Take care not to spray or allow spray to drift outside the target area in order to avoid unwanted crop
destruction. With wiper application, droplets, mist, foam or splatter of the herbicide solution onto desirable
vegetation may result in discoloration, stunting, or destruction.
9.7 Oil Seed Crops
LABELED CROPS: Borage, Buffalo gourd (seed), Canola, Crambe, Flax, Jojoba, Lesquerella,
Meadowfoam, Mustard (seed), Rape, Safflower, Sesame, Sunflower
Master Label 524-454 Page 28 of 139 Submitted August 26, 2009

~Oo~ \~O
I. MAIN LABEL FOR FOOD CROP USES
For use directions with Roundup Ready canola, see the "ROUNDUP READY CROPS" section of this
label.
TYPES OF APPLICATION: Those listed in Section 9.0 plus Preharvest (Safflower and Sunflower only)
USE INSTRUCTIONS: Refer to the following table for maximum application rates of this product for use
in canola, safflower and sunflower. See the "PRODUCT INFORMATION" section of this label for more
information on Maximum Application Rates.
Maximum Application Rates
Canola
Combined total for all preemergence and shielded 2 quarts per acre sprayer applications
Safflower
Combined total for all preemergence and shielded 3 quarts per acre sprayer applications
Preharvest application 3 quarts per acre
Sunflower
Combined total for all preemergence and shielded 1 quart per acre sprayer applications
Preharvest application 1 quart per acre
Preplant, At·Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting oil seed crops listed
in this section. Observe the maximum application rates for canola, safflower and sunflower listed at the
beginning of this section.
TANK MIXTURES: For sunflowers, a tank mixture with pendimethalin (Prowl) may be applied before,
during or after planting into conventionally tilled soil, a cover crop, established sod or previous crop
residue.
Selective Equipment
USE INSTRUCTIONS: This product may be applied using a wiper applicator or shielded sprayer in
between the rows once the crop is established. See additional instructions on the use of wiper
applicators and hooded sprayers in the "APPLICATION EQUIPMENT AND TECHNIQUES" section of this
label. Observe the maximum application rates for canola, safflower and sunflower listed at the beginning
of this section.
Preharvest (Safflower and Sunflower Only)
USE INSTRUCTIONS: This product provides weed control as a harvest aid when applied to a
physiologically mature crop of safflower and sunflower prior to harvest. For safflower, apply a maximum
of 3 quarts of this product when seed has lost its opaque character, approximately 20 to 30 days after the
end of flowering of the secondary branches. For sunflower, apply a maximum of 1 quart of this product
when the backsides of sunflower heads are yellow and bracts are turning brown, and seed moisture
content is less than 35 percent.
PRECAUTIONS, RESTRICTIONS: Allow a minimum of 7 days between treatment and harvest or
livestock feeding. Application must be made at least 30 days prior to planting any crop not listed on this
label.
Master Label 524-454 Page 29 of 139 Submitted August 26, 2009

I. MAIN LABEL FOR FOOD CROP USES
Post-Harvest
USE INSTRUCTIONS: This product may be applied for weed control after harvest of oil seed crops.
Higher rates may be required for control of large weeds that were growing in the crop at the time of
harvest. Tank mixtures with 2,4-0 or dicamba may be used.
PRECAUTIONS, RESTRICTIONS: Allow a minimum of 7 days between treatment and harvest or feeding
of treated vegetation. Applications must be made at least 30 days prior to planting any crop not .listed on
this label.
9.8 Soybean
TYPES OF APPLICATION: Those listed in Section 9.0, plus Spot Treatment, Selective Equipment,
Preharvest
For use directions with Roundup Ready soybean, and Roundup Ready 2 Yield soybean, see the
"ROUNDUP READY CROPS" section of this label.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied alone or in a tank mixture before, during or after
planting soybean, but prior to crop emergence.
TANK MIXTURES: This product may be tank-mixed with the following products. Ensure that the specific
product being used is labeled for application prior to planting or the emergence of soybean. Read and
follow label directions for all products in the tank mixture. Apply these tank mixtures in 10 to 20 gallons of
water per acre.
[Insert active ingredient(s) or brand name of product(s) containing the fol/owing active ingredients
that, at the time of printing, are registered for use preplant, at-planting and/or preemergence to
soybeans:
2,4-0, alachlor, atrazine, carfentrazone-ethyl, chlorimuron ethyl, clethodim, clomazone,
cloransulam-methyl, dimethenamid, fenoxyprop, fluazifop-p-butyl, flufenacet, flumetsulam,
flumiclorac pentyl ester, flumioxazin, fomesafen, imazaquin, imazethapyr, lactofen, linuron,
metolachlor, s-metolachlor, metribuzin, pendimethalin, sulfentrazone, tribenuron methyl,
trifluralin, quizalofop P-ethyl
Aim, Assure II, Axiom, Authority, Blanket, Boundary, Canopy, Canopy EX, Classic, Cobra,
Command, Command Xtra, Domain, Dual MAGNUM, Dual II MAGNUM, FirstRate, Flexstar,
Frontier, Fusion, Gangster, Gauntlet, INTRRO, Lexone, Linex, Linuron, Lorox, Lorox Plus, Me
Too-Lachlor, Micro-Tech, Outlook, Pendimax, Prowl, Prowl H20, Pursuit, Pursuit Plus, Python,
Reflex, Resource, Scepter, Select, Select MAX, Sencor, Spartan, Squadron, Steel, Treflan, Valor]
For tough-to-control annual weeds such as fall panicum, barnyardgrass, crabgrass, shattercane and
broad leaf signalgrass up to 2 inches tall, and Pennsylvania smartweed up to 6 inches tall, apply this
product at 2 pints per acre in these tank mixtures. For other labeled annual weeds, apply 1.5 to 2 pints of
this product per acre when weeds are less than 6 inches tall, and 2 to 3 pints per acre when weeds are
over 6 inches tall.
PRECAUTIONS, RESTRICTIONS: Refer to individual tank-mix product label for restrictions and
precautions; use according to the most restrictive precautionary statements for each product in the tank
mixture.
Spot Treatment
USE INSTRUCTIONS: This product may be applied as a spot treatment prior to initial pod set in soybean.
Master Label 524-454 Page 30 of 139 Submitted August 26, 2009

) )
I. MAIN LABEL FOR FOOD CROP USES
PRECAUTIONS, RESTRICTIONS: Do not treat more than 10 percent of the total field area to be
harvested. Crop sprayed in treated area will be killed. Take care not to spray or allow spray to drift
outside the target area to avoid unwanted crop destruction.
Selective Equipment
USE INSTRUCTIONS: This product may be applied in soybean using a shielded applicator, hooded
sprayer, wiper applicator or sponge bar. See additional instructions on the use of selective equipment in
the "APPLICATION EQUIPMENT AND TECHNIQUES" section of this label.
PRECAUTIONS, RESTRICTIONS: Allow at least 7 days between application and harvest.
Preharvest
USE INSTRUCTIONS: This product may be applied to soybean prior to harvest after pods have set and
lost all green color. Apply at rates given in the "ANNUAL WEEDS RATE SECTION" and "PERENNIAL
WEEDS RATE SECTION". Take care to avoid excessive seed shatter loss due to ground application
equipment.
PRECAUTIONS, RESTRICTIONS: Do not apply more than 5 quarts of this product per acre for
preharvest application. Do not apply more than 2 quarts of this product per acre by air. Allow a minimum
of 7 days between application and harvest of soybeans. If the preharvest application rate is greater than 1
quart per acre, do not graze or harvest treated hay or fodder for livestock feed within 25 days of
application. If the application rate is 1 quart per acre or less, the grazing restriction is reduced to 14 days
after application. Preharvest application on soybean grown for seed could result in a reduction in
germination or vigor. Buyer and all users are responsible for any and all loss or damage in connection
with the preharvest use of this product on soybean grown for seed.
9.9 Sugarcane
TYPES OF APPLICATION: Those listed in Section 9.0 plus Spot Treatment, Sugarcane Ripening
Preplant, At·Planting, Preemergence
USE INSTRUCTIONS: This product may be applied in or around sugarcane fields, or in fields prior to the
emergence of plant cane.
PRECAUTIONS, RESTRICTIONS: Do not apply to vegetation in or around ditches, canals or ponds
containing water to be used for irrigation.
Spot Treatment
USE INSTRUCTIONS: This product may be applied as a spot treatment in sugarcane. For control of
volunteer or diseased sugarcane, apply a 1-percent solution of this product in water using a spray-to-wet
technique. Best results are obtained on volunteer or diseased sugarcane with at least 7 new leaves.
PRECAUTIONS, RESTRICTIONS: Avoid spray contact with healthy sugarcane plants as severe damage
or destruction may result. Do not feed or graze treated sugarcane foliage following application.
Fallow Treatment
USE INSTRUCTIONS: This product may be used as a replacement for tillage in fields that are lying fallow
between sugarcane crops. This product may also be used to remove the last stubble of ratoon cane. For
removal of last stubble of ratoon cane, apply 4 to 5 quarts of this product in 10 to 40 gallons of water per
acre to new growth having at least 7 new leaves. Allow 7 or more days after application before tillage.
Aerial application of up to 3 quarts per acre may be made in fallow sites where there is sufficient buffer to
prevent drift onto adjacent crops. Tank mixtures with 2,4-0 and dicamba may be used. Ensure that the
specific product being used is labeled for these applications in sugarcane. Read and follow label
directions of all products in the tank mixture.
Master Label 524-454 Page 31 of 139 Submitted August 26, 2009

I. MAIN LABEL FOR FOOD CROP USES
Hooded Sprayer
USE INSTRUCTIONS: This product may be applied using a hooded sprayer for weed control in-between
rows of sugarcane. See additional instructions on the use of hooded sprayers in the "APPLICATION
EQUIPMENT AND TECHNIQUES" section of this label.
PRECAUTIONS, RESTRICTIONS: Do not allow treated weeds to come into contact with the crop.
Droplets, mist, foam or splatter of the herbicide solution settling on the crop may result in discoloration,
stunting or destruction. Such damage shall be the sole responsibility of the applicator.
Sugarcane Ripening
USE INSTRUCTIONS: This product is a foliar-applied plant growth regulator to hasten ripening and
increase the level of sucrose in sugarcane. It is effective in both low and high-tonnage sugarcane.
When applied as directed under the conditions described, this product will hasten ripening and extend the
period of high sucrose level in sugarcane.
As a result of leaf desiccation, improved trash burn can be expected.
Most of the sucrose increase is concentrated in the top nodes of the treated cane stalk. To maximize
sugar recovery where topping is practiced at harvest, top at the base of the fourth leaf.
Prior to application, consult your state sugarcane authority or local [INSERT COMPANY NAME]
representative regarding the degree of sucrose response anticipated from the variety of sugarcane to be
treated.
Application Rates: Use the following application rates and timing instructions according to the State in
which the sugarcane is grown.
NOTE: Use the higher rate within the given range when treating sugarcane under adverse ripening
conditions or when less responsive varieties are to be treated.
FLORIDA-Apply 7 to 16 fluid ounces of this product per acre 3 to 5 weeks before harvest of LAST
RATOON CANE ONLY.
HAWAII-Apply 12 to 28 fluid ounces of this product per acre 4 to 10 weeks before harvest.
LOUISIANA-Apply 5 to 16 fluid ounces of this product per acre 3 to 7 weeks before harvest of RA TOON
CANE ONLY.
PUERTO RICO-Apply 7 fluid ounces of this product per acre 3 to 5 weeks before harvest of RATOON
CANE ONLY.
TEXAS-Apply 7 to 16 fluid ounces of this product per acre 3 to 5 weeks before harvest of RATOON
CANE ONLY.
PRECAUTIONS, RESTRICTIONS: Application of this product may initiate development of shooting eyes.
This product may not increase the sucrose content of sugarcane under conditions of good natural
ripening. Within 2 to 3 weeks after application, this product may produce a slight yellowing to a
pronounced browning and drying of leaves, and a shortening of upper internodes. Spindle death may
occur.
Rainfall within 6 hours after application may reduce effectiveness.
Application to sugarcane grown for seed could result in a reduction in germination or vigor. Buyer and all
users are responsible for any and all loss or damage in connection with the preharvest use of this product
on sugarcane grown for seed.
Do not feed or graze treated sugarcane forage following application. Do not plant subsequent crops in
treated fields other than the following for 30 days after application: alfalfa or other forage legumes, beans
Master Label 524-454 Page 32 of 139 Submitted August 26, 2009

I. MAIN LABEL FOR FOOD CROP USES
(all types), corn (all types), cotton, melons (all types), pasture grasses, peanuts, potatoes (Irish or sweet),
sorghum (milo), soybeans, squash (all types) or wheat.
Do not apply for enhanced ripening to any crops other than sugarcane. Use of this product in any
manner not consistent with this label may result in injury to persons, animals or crops, or other
unintended consequences.
9.10 Vegetable Crops
NOTE: THIS "VEGETABLE CROPS" SECTION GIVES DIRECTIONS THAT APPLY TO ALL
VEGETABLE CROPS LISTED ALPHABETICALLY IN THE SECTIONS THAT FOLLOW. SEE THE
INDIVIDUAL CROP SECTIONS FOR SPECIFIC USE INSTRUCTIONS, PRE HARVEST INTERVALS,
PRECAUTIONS AND RESTRICTIONS.
TYPES OF APPLICATION: Chemical Fallow, Preplant Fallow Beds, Preplant, At-Planting,
Preemergence, Prior to Transplanting Vegetables, Hooded Sprayer in Row Middles, Shielded Sprayer in
Row Middles, Wiper Applicator in Row Middles, Post-Harvest
PRECAUTIONS, RESTRICTIONS: This product could cause crop injury when applied prior to
transplanting or direct-seeding crops into plastic mulch. Remove product residues from the plastic prior to
planting with a single 0.5-inch application of water, either by natural rainfall or by irrigation. Ensure that
the wash water flushes off the plastic mulch and does not enter transplant holes. Application of this
product at crop emergence will result in injury or death to emerged seedlings.
Avoid contact of this herbicide with foliage, green shoots or stems, bark, exposed roots (including those
emerging from plastic mulch), or fruit of crops, as severe crop injury or destruction may result. When
making a preemergence or at-planting application, the application must be made before crop emergence
to avoid severe crop injury. Apply before seed germination in coarse sandy soils to further minimize the
risk of crop injury. In crops with vines, make hooded sprayer, shielded sprayer and wiper applicator
treatments in row middles prior to vine development, otherwise severe crop injury or destruction may
result. Unless otherwise specified on this label, treatment with selective equipment including wiper
applicators or hooded sprayers must be made at least 14 days prior to harvest. Post-Harvest or fallow
application must be made at least 30 days prior to planting any crop not listed on this label. See
additional use instructions in the "APPLICATION EQUIPMENT AND TECHNIQUES" section of this label.
9.10.1 Brassica Vegetables
LABELED CROPS: Broccoli, Chinese broccoli (gai Ion), Broccoli raab (rapini), Brussels sprouts,
Cabbage, Chinese cabbage (bok choy), Chinese cabbage (napa), Chinese mustard cabbage (gai
choy), Cauliflower, Cavalo broccolo, Collards, Kale, Kohlrabi, Mizuna, Mustard greens, Mustard
spinach, Rape greens
9.10.2 Bulb Vegetables
LABELED CROPS: Garlic, Great-headed garlic, Leek, Onion (dry bulb and green), Welsh onion,
Shallot
9.10.3 Cucurbit Vegetables and Fruits
LABELED CROPS: Chayote (fruit), Chinese waxgourd (Chinese preserving melon), Citron melon,
Cucumber, Gherkin, Edible gourd (includes hyotan, cucuzza, hechima, Chinese okra), Melons (all),
Momordica spp (includes balsam apple, balsam pear, bittermelon, Chinese cucumber), Muskmelon
(includes cantaloupe, casaba, crenshaw melon, golden pershaw melon, honeydew melon, honey ball
melon, mango melon, Persian melon, pineapple melon, Santa Claus melon, snake melon), Pumpkin,
Summer squash (includes crookneck squash, scallop squash, straightneck squash, vegetable
marrow, zucchini), Winter squash (includes butternut squash, calabaza, hubbard squash, acorn
squash, spaghetti squash), Watermelon
Master Label 524-454 Page 33 of 139 Submitted August 26, 2009

I. MAIN LABEL FOR FOOD CROP USES
PRECAUTIONS, RESTRICTIONS: For cantaloupe, casaba melon, crenshaw melon, cucumber,
gherkin, gourds, honeydew melon, honey ball melon, mango melon, melons (all), muskmelon,
Persian melon, pumpkin, squash (summer, winter), and watermelon, allow at least 3 days between
application and planting.
9.10.4 Leafy Vegetables
LABELED CROPS: Amaranth (Chinese spinach), Arugula (roquette), Beet greens, Cardoon, Celery,
Chinese celery, Celtuce, Chaya, Chervil, Edible-leaved chrysanthemum, Garland chrysanthemum,
Corn salad, Cress (garden and upland), Dandelion, Dock (sorrel), Dokudami, Endive (escarole),
Florence fennel, Gow kee, Lettuce (head and leaf), Orach, Parsley, Purslane (garden and winter),
Radicchio (red chicory), Rhubarb, Spinach, New Zealand spinach, Vine spinach, Swiss chard,
Watercress (upland), Water spinach
PRECAUTIONS, RESTRICTIONS: For watercress, avoid application within 3 days prior to seeding
and during the period between seeding and emergence to minimize the risk of crop injury.
9.10.5 Fruiting Vegetables
LABELED CROPS: Eggplant, Groundcherry (Physalis spp) , Pepino, Pepper (includes bell pepper,
chili pepper, cooking pepper, pimento, sweet pepper), Tomatillo, Tomato
PRECAUTIONS, RESTRICTIONS: For eggplant, ground cherry, pepper (all), and tomatillo, allow at
least 3 days between application and planting. For tomato and tomatillos grown on sandy soil, do not
apply using hooded sprayer, shielded sprayer or wiper applicator in row middles because of the
potential for crop injury.
9.10.6 Legume Vegetables (Succulent or Dried)
LABELED CROPS: Bean (Lupinus: includes grain lupin, sweet lupin, white lupin, and white sweet
lupin), Bean (Phaseo/us: includes field bean, kidney bean, lima bean, navy bean, pinto bean, runner
bean, snap bean, tepary bean, wax bean), Bean (Vigna: includes adzuki bean, asparagus bean,
blackeyed pea, catjang, Chinese longbean, cowpea, crowder pea, moth bean, mung bean, rice bean,
southern pea, urd bean, yardlong bean), Broad bean (fava), Chickpea (garbanzo), Guar, Jackbean,
Lablab bean, Lentil, Pea (Pisum: includes dwarf pea, edible-podded pea, English pea, field pea,
garden pea, green pea, snowpea, sugar snap pea), Pigeon pea, Soybean (immature seed), Sword
bean
Spot Treatment (Dry Beans, Peas, Lentils and Chickpeas Only)
USE INSTRUCTIONS: This product may be applied as a spot treatment to control troublesome
weeds such as Canada thistle, quackgrass, mayweed (dog fennel), and milkweed in dry beans, peas,
lentils and chickpeas. Apply up to 1 quart of this product per acre in dry beans, or up to 3 quarts per
acre in dry peas, lentils and chickpeas, in 10 to 20 gallons of water using ground application
equipment, or use a 2-percent solution in a hand-held sprayer. For best results, apply at or beyond
the bud stage of growth.
PRECAUTIONS, RESTRICTIONS: Apply at least 7 days before harvest. Only one application may
be made per year. Do not combine spot treatment with a preharvest broadcast spray on the same
crop area. Observe at least a 30-day plant-back interval between treatment and replanting of any
crop not listed on this label. Do not feed treated vines and hay to livestock. Do not treat cowpeas or
field (feed) peas, since these crop are considered to be grown as livestock feed. Crop sprayed in the
treated area will be killed. Take care not to spray or allow spray to drift outside target area in order to
avoid unwanted crop destruction.
Preharvest (Dry Beans, Peas, Lentils and Chickpeas Only)
Master Label 524-454 Page 34 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
USE INSTRUCTIONS: This product may be applied over the top of dry beans, peas, lentils and
chickpeas to prior to harvest. Apply up to 1 quart of this product per acre in dry beans, or up to 3
quarts per acre in dry peas, lentils, and chickpeas, in 3 to 20 gallons of water per acre at the hard
dough stage of the legume seed (30 percent grain moisture or less).
PRECAUTIONS, RESTRICTIONS: Apply at least 7 days prior to harvest. Only one preharvest
application may be made per year. Do not combine a preharvest spray with spot treatment on the
same crop area. Observe at least a 30-day plant-back interval between treatment and replanting of
any crop not listed on this label. Do not feed treated vines and hay to livestock. Pre harvest
application on legumes grown for seed could result in a reduction in germination or vigor. Buyer and
all users are responsible for any and all loss or damage in connection with the pre harvest use of this
product on legumes grown for seed. Do not treat cowpeas or field (feed) peas, since these crops are
considered to be grown as livestock feed.
9.10.7 Root and Tuber Vegetables
LABELED CROPS: Arracacha, Arrowroot, Chinese artichoke, Jerusalem artichoke, Beet (garden),
Burdock, Canna, Carrot, Cassava (bitter and sweet), Celeriac, Chayote (root), Chervil (turnip-rooted),
Chicory, Chufa, Dasheen (taro), Galangal, Ginger, Ginseng, Horseradish, Leren, Kava (turnip
rooted), Parsley (turnip-rooted), Parsnip, Potato, Radish, Oriental radish, Rutabaga, Salsify, Black
salsify, Spanish salsify, Skirret, Sweet potato, Tanier, Turmeric, Turnip, Wasabi, Yacon, Yam bean,
True yam
Directed Application (Non-Bearing Ginseng Only)
USE INSTRUCTIONS: This product may be applied for weed control in established non-bearing
ginseng. Application may be made with boom equipment, CDA, a shielded sprayer, a wiper
applicator, a hand-held or backpack wand, lance, or orchard gun. See additional use instructions for
selective equipment in the "APPLICATION EQUIPMENT AND TECHNIQUES" section of this label.
PRECAUTIONS, RESTRICTIONS: Application must be made at least one year prior to harvest.
Control the application so as not to allow any contact of this product with the ginseng plant. Droplets,
mist, foam or splatter of the herbicide solution settling onto desirable vegetation may result in
discoloration, stunting or destruction.
Wiper Applicator (Rutabagas Only)
USE INSTRUCTIONS: A wiper applicator may be used over the top of rutabagas for the control of tall
weeds. See additional use instructions for wiper applicators in the "APPLICATION EQUIPMENT AND
TECHNIQUES" section of this label.
PRECAUTIONS, RESTRICTIONS: Allow at least 14 days between application and harvest of
rutabagas. Droplets, mist, foam or splatter of the herbicide solution settling onto desirable vegetation
may result in discoloration, stunting or destruction.
9.11 Miscellaneous Crops
LABELED CROPS: Aloe vera, Asparagus, Bamboo shoots, Globe artichoke, Okra, Peanut (ground nut),
Pineapple, Strawberry, Sugar beet
TYPES OF APPLICATION: Those listed in Section 9.0 plus Weed Control, Site Preparation, Spot
Treatment (Asparagus)
For use directions with Roundup Ready sugar beet, see the "ROUNDUP READY CROPS" section of this
label.
PRECAUTIONS, RESTRICTIONS: Avoid contact of this product with foliage, green shoots or stems,
bark, exposed roots (including those emerging from plastic mulch), or fruit of crops, as severe crop injury
Master Label 524-454 Page 35 of 139 Submitted August 26, 2009

I. MAIN LABEL FOR FOOD CROP USES
or destruction may result. When making preemergence and at-planting applications, application must be
made before crop emergence to avoid severe crop injury. Apply before seed germination in coarse sandy
soils to further minimize the risk of crop injury. In crops with vines, make hooded sprayer, shielded
sprayer and wiper applicator treatments in row middles prior to vine development, otherwise severe injury
or destruction may result. Unless otherwise specified in this product's labeling, treatment using selective
equipment including wiper applicators and hooded sprayers must be made at least 14 days prior to
harvest. Post-harvest or fallow applications must be made at least 30 days prior to planting any crop not
listed on this label. See additional information in the "APPLICATION EQUIPMENT AND TECHNIQUES"
section of this label.
Weed Control, Site Preparation
USE INSTRUCTIONS: This product may be applied for weed control or for site preparation prior to
planting or transplanting crops listed in this section.
PRECAUTIONS, RESTRICTIONS: This product could cause crop injury when applied prior to
transplanting or direct-seeding crops into plastic mulch. Remove residues of this product from the plastic
prior to planting with a single 0.5-inch application of water, either by natural rainfall or by irrigation. Ensure
that the wash water flushes off the plastic mulch and does not enter transplant holes. A"ow at least 21
days between residue removal and transplanting. Application of this product at crop emergence will result
in injury or death to emerged seedlings.
Do not apply within a week before the first asparagus spears emerge. Do not feed or graze treated
pineapple forage following application.
Spot Treatment (Asparagus)
USE INSTRUCTIONS: This product may be applied immediately after cutting, but prior to the emergence
of new spears.
PRECAUTIONS, RESTRICTIONS: Do not treat more than 10 percent of the total field area to be
harvested. Do not harvest within 5 days of treatment.
Post-Harvest (Asparagus)
USE INSTRUCTIONS: This product may be applied for weed control after the last harvest and all spears
have been removed. If spears are allowed to re-grow, delay application until ferns have developed and
make the application as a directed or shielded spray in order to avoid contact of the spray with ferns,
stems or spears. See additional use instructions in the "APPLICATION EQUIPMENT AND
TECHNIQUES" section of this label.
PRECAUTIONS, RESTRICTIONS: Direct contact of the spray with asparagus may result in serious crop
injury.
10.0 TREE, VINE, AND SHRUB CROPS
NOTE: THIS SECTION GIVES DIRECTIONS THAT APPLY TO ALL TREE, VINE, AND SHRUB CROPS
LISTED ALPHABETICALLY IN THE SECTIONS THAT FOLLOW. SEE THE INDIVIDUAL CROP
SECTIONS FOR SPECIFIC INSTRUCTIONS, PREHARVEST INTERVALS, PRECAUTIONS AND
RESTRICTIONS.
TYPES OF APPLICATION: Preplant (site preparation) Broadcast Sprays, Weed Control, Middles (in
between rows of trees, vines or bushes), Strips (within rows of trees, vines or bushes), Selective
Equipment (shielded sprayers, wiper applicators), Directed Spray, Spot Treatment, Perennial Grass
Suppression, Cut Stump
Master Label 524-454 Page 36 of 139 Submitted August 26, 2009

')
1 )
I. MAIN LABEL FOR FOOD CROP USES
This product may be applied using boom spray equipment, CDA, a shielded sprayer, a wiper applicator, a
hand-held or backpack wand, lance, or orchard gun, unless prohibited in the specific crop sections that
follow.
USE INSTRUCTIONS: This product may be applied in middles (in-between rows of trees or vines), strips
(within rows of trees or vines), and for weed control or perennial grass suppression in established tree
fruit and nut groves, orchards, berries, and vineyards. It may also be used for site preparation prior to
planting or transplanting these crops. Apply 1 pint to 5 quarts per acre according to the "ANNUAL
WEEDS RATE SECTION" and "PERENNIAL WEEDS RATE SECTION" of this label. Use the higher
rates in the given range when weeds are stressed, growing in dense populations or are greater than 12
inches tall. Repeat applications may be made up to a maximum of 10.6 quarts per acre per year. See
the "PRODUCT INFORMATION" section of this label for more information on Maximum Application
Rates.
PRECAUTIONS, RESTRICTIONS: Use extreme care to avoid contact of this herbicide solution, spray,
drift or mist with foliage or green bark of trunk, branches, suckers, fruit or other parts of trees, canes and
vines. Avoid application when recent pruning wounds or other mechanical injury has occurred. Contact of
this product with other than matured brown bark can result in serious crop damage or destruction. Only
shielded or directed sprayers may be used in crops with potential for crop contact, and then only where
there is sufficient clearance. For application in strips (within rows of trees), only use selective equipment
(directed spray, hooded sprayer, shielded sprayer, or wiper applicator) in order to minimize the potential
for overspray or drift of this product onto the crop. For berry crops, hooded or shielded sprayers must be
fully enclosed including top, sides, front and back. Only wiper applicators or shielded sprayers capable of
preventing all contact with the crop may be used. See additional instructions and precautions in the
"APPLICATION EQUIPMENT AND TECHNIQUES" section of this label.
Allow a minimum of 3 days between application and transplanting.
Middles (in-between rows)
USE INSTRUCTIONS: This product will control or suppress annual and perennial weeds and ground
covers growing in-between rows of tree and vine crops listed on this label. If weeds are under drought
stress, irrigate prior to application. Reduced weed control may result if weeds have been recently mowed
at the time of application.
TANK MIXTURES: A tank mixture of this product with Goal 2XL may be applied for annual weed control
in-between rows (middles) of citrus crops, tree fruits, tree nuts and vine crops when weeds are stressed
or growing in dense populations. Application of 16 to 32 fluid ounces of this product per acre plus 3 to 12
fluid ounces of Goal 2XL per acre will control annual weeds with a maximum height or length of 6 inches,
including crabgrass, common groundsel, junglerice, common lambsquarters, redroot pigweed, London
rocket, common ryegrass, shepherd's-purse, annual sowthistle, filaree (suppression),
horseweed/marestail (Conyza canadensis), stinging nettle and common purslane (suppression). This
tank mixture will also control common cheeseweed (malva) or hairy fleabane (Conyza bonariensis) with a
maximum height or length of 3 inches. Read and follow all labels and directions for use of all products
being used in the tank mixture.
This product may also be applied to row middles in tank mixtures with the following products. Ensure that
the specific product being used is labeled for application to the crop to be treated. Read and follow label
directions of all products in the tank mixture.
[Insert active ingredient(s) or brand name of product(s) containing the following active ingredients
that, at the time of printing, are registered for use in middles (in-between rows) of tree, vine and
shrub crops:
bromacil, diuron, napropamide, norflurazon, oryzalin, oxyfluorfen, pendimethalin, simazine
Master Label 524-454 Page 37 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOO CROP USES
Oevrinol 50-OF, Oirex 4L, Goal 2XL, Karmex OF, Karmex II OF, Prowl, Princep Caliber 90,
Simazine 4L, Simazine BOW, Sim-TroI4L, Solicam OF, Surflan AS, Surflan 75W]
Strips (within rows)
TANK MIXTURES: This product may be applied within rows of tree or vine crops in tank mixtures with the
following products. Ensure that the specific product being used is labeled for this use and with the crop
being grown. Read and follow label directions of all products in the tank mixture.
[Insert active ingredient(s) or brand name of product(s) containing the fol/owing active ingredients
that, at the time of printing, are registered for use in strips (in rows) of tree, vine and shrub crops:
bromacil, diu ron, napropamide, norflurazon, oryzalin, oxyfluorfen, pendimethalin, simazine
Oevrinol 50-OF, Oirex 4L, Goal 2XL, Karmex OF, Karmex II OF, Prowl, Princep Caliber 90,
Simazine 4L, Simazine BOW, Sim-TroI4L, Solicam OF, Surflan AS, Surflan 75W]
PRECAUTIONS, RESTRICTIONS: 00 not apply these tank mixtures in Puerto Rico. Refer to the
individual tank-mix product label for restrictions and precautions; use according to the most restrictive
precautionary statements for each product in the tank mixture.
Perennial Grass Suppression
This product will suppress perennial grasses such as bahiagrass, bermudagrass, tall fescue,
orchardgrass, Kentucky bluegrass, and quackgrass that are grown as ground covers in tree and vine
crops.
For suppression of tall fescue, fine fescue, orchardgrass and quackgrass, apply B fluid ounces of this
product in 10 to 20 gallons of water per acre.
For suppression of Kentucky bluegrass covers, apply 6 fluid ounces of this product per acre. 00 not add
ammonium sulfate.
For best results, mow cool-season grass covers in the spring to even their height and apply this product 3
to 4 days after mowing.
For suppression of vegetative growth and seed head inhibition of bahiagrass for approximately 45 days,
apply 6 fluid ounces of this product in 10 to 25 gallons of water per acre. Apply 1 to 2 weeks after full
green-up or after mowing to a uniform height of 3 to 4 inches. This application must be made prior to
seed head emergence.
For suppression up to 120 days, apply 4 fluid ounces of this product per acre, followed by an application
of 2 to 4 fluid ounces per acre about 45 days later. Make no more than 2 applications per year.
For burndown of bermudagrass, apply 1 to 2 quarts of this product in 3 to 20 gallons of water per acre.
Use this treatment only if reduction of the bermudagrass stand can be tolerated. When burndown is
required prior to harvest, apply at least 21 days prior to harvest to allow sufficient time for burndown to
occur.
For suppression of bermudagrass, apply 6 to 16 fluid ounces of this product per acre east of the Rocky
Mountains and 16 fluid ounces of this product per acre west of the Rocky Mountains in a spray volume of
3 to 20 gallons per acre, no sooner than 1 to 2 weeks after full green-up. If the bermudagrass is mowed
prior to application, maintain a minimum of 3 inches in height. Sequential applications may be made
when re-growth occurs and bermudagrass injury and stand reduction can be tolerated. East of the Rocky
Mountains, use 6 to 10 fluid ounces of this product per acre in shaded conditions or where a lesser
degree of suppression is desired.
Cut Stump (Tree Crops)
Master Label 524-454 Page 38 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
\
)
USE INSTRUCTIONS: Application of this product to freshly cut tree stumps may be made during site
preparation or site renovation prior to transplanting tree crops. This product will control re-growth of cut
stumps and re-sprouts of many types of tree species, some of which are listed below.
Citrus Trees: Calamondin, Chironja, Citron, Citrus hybrids, Grapefruit, Kumquat, Lemon, Lime,
Mandarin (Tangerine), Orange (all), Pummelo, Tangelo (Ugli), Tangor
Fruit Trees: Apple, Apricot, Cherry (sweet, sour), Crabapple, Loquat, Mayhaw, Nectarine, Olive,
Peach, Pear, Plum/Prune (all), Quince
Nut Trees: Almond, Beechnut, Brazil nut, Butternut, Cashew, Chestnut, Chinquapin, Filbert
(hazelnut), Hickory Nut, Macadamia, Pecan, Pistachio, Walnut (black, English)
Apply this product using suitable equipment to ensure coverage of the entire cambium. Cut trees or re
sprouts close to the soil surface. Apply a 50- to 1 DO-percent solution of this product to the freshly cut
surface immediately after cutting. Delays in application can result in reduced performance. For best
results, make application during periods of active growth and full leaf expansion.
PRECAUTIONS, RESTRICTIONS: DO NOT MAKE CUT STUMP APPLICATION WHEN THE ROOTS
OF ADJACENT DESIRABLE TREES MAY BE GRAFTED TO THE ROOTS OF THE CUT STUMP.
INJURY RESULTING FROM ROOT GRAFTING MAY OCCUR IN ADJACENT TREES. Some sprouts,
stems, or trees may share the same root system. Adjacent trees having a similar age, height and
spacing may signal shared roots. Whether grafted or shared, injury is likely to occur to non-treated
stems/trees when one or more trees sharing common roots are treated.
10.1 Berry Crops
LABELED CROPS: Blackberry (including bingleberry, black satin berry, boysenberry, Cherokee
blackberry, chesterberry, Cheyenne blackberry, coryberry, darrowberry, dewberry, Dirksen thornless
berry, Himalayaberry, hullberry, juneberry, lavacaberry, lowberry, lucretiaberry, marion berry, nectarberry,
olallieberry, Oregon evergreen berry, phenomenal berry, rangeberry, raven berry, rossberry, Shawnee
blackberry, and youngberry), Blueberry, Cranberry, Currant, Elderberry, Gooseberry, Huckleberry,
Loganberry, , Salal. [Optional Crop: Raspberry (black, red)]
TYPES OF APPLICATION: Those listed in Section 10.0, plus Spot Treatment in Cranberry Production,
Post-Harvest in Cranberry Production
PRECAUTIONS, RESTRICTIONS: To avoid damage, herbicide spray must not be allowed to contact
desirable vegetation, including green shoots, canes, or foliage. Allow a minimum of 30 days between last
application and harvest of cranberries. Allow a minimum of 14 days between last application and harvest
of other berry crops.
Spot Treatment in Cranberry Production
USE INSTRUCTIONS: Spot treatment may be used to control weeds growing in dry ditches (interior and
perimeter) of cranberry production areas. A hand-held sprayer or other appropriate application equipment
listed in the "APPLICATION EQUIPMENT AND TECHNIQUES" section of this label may be used. Drop
water level to remove standing water in ditches prior to application. With a hand-held sprayer, use a 1 to
2-percent solution of this product, and spray adequately to wet the vegetation only; do not spray to the
point of run-off.
PRECAUTIONS, RESTRICTIONS: To achieve maximum weed control in treatment of dry ditches after
water drawdown, allow 2 or more days after treatment before reintroduction of water. Apply this product
within 1 day after drawdown to ensure application to actively growing weeds. Allow a minimum of 30 days
between last application and harvest of cranberries. Do not apply by air. Do not apply directly to water.
Use nozzles that emit medium to large-sized droplets in order to minimize spray drift and avoid crop
injury.
Master Label 524-454 Page 39 of 139 Submitted August 26, 2009

) ) L\ l at \40
I. MAIN LABEL FOR FOOD CROP USES
Post-Harvest Treatments in Cranberry Production
USE INSTRUCTIONS: Application of this product may be made after the harvest of cranberries to control
weeds growing in the field. Apply this product to vines that appear dormant (after they have turned red).
Hand-held sprayers, wiper applicators, or other appropriate application equipment listed in the
"APPLICATION EQUIPMENT AND TECHNIQUES" section of this label may be used for this use. With
hand-held sprayers, use a 0.5 to 1-percent solution of this product and spray adequately to wet the
vegetation only; do not spray to the point of run-off. With hand-held boom sprayers, apply 2 to 4 quarts of
this product per acre.
PRECAUTIONS, RESTRICTIONS: Apply this product only after cranberries have been harvested. Do
not treat more than 10 percent of the total bog. Allow a minimum of 6 months between last application
and next harvest of cranberries. Do not apply by air. Do not apply directly to water. Even though vines
appear dormant, contact of the herbicide solution with desirable vegetation may result in damage or
severe plant injury. Cranberry plants that are directly sprayed may be killed.
10.2 Citrus
LABELED CROPS: Calamondin, Chironja, Citron, Citrus Hybrids, Grapefruit, Kumquat, Lemon, Lime,
Mandarin (tangerine), Orange (all), Pummelo, Satsuma Mandarin, Tangelo (ugli), Tangor
TYPES OF APPLICATION: Those listed in Section 10.0
PRECAUTIONS, RESTRICTIONS: Allow a minimum of 1 day between last application and harvest in
citrus crops. For citron groves, apply as a directed spray only.
USE INSTRUCTIONS: The following use instructions pertain to application in Florida and Texas only.
For burndown or control of the weeds listed below, apply this product at the specified rate in 3 to 30
gallons of water per acre. Where weed foliage is dense, use 10 to 30 gallons of water per acre.
For goatweed, apply 2 to 3 quarts of this product in 20 to 30 gallons of water per acre when plants are
actively growing. Use 2 quarts per acre when plants are less than 8 inches tall, and 3 quarts per acre
when plants are greater than 8 inches tall. If goatweed is greater than 8 inches tall, use of this product in
a tank mixture with Krovar I or Karmex may improve weed control. Refer to the individual product labels
for a listing of specific crops, rates, geographic restrictions and precautionary statements.
Perennial weeds:
S = Suppression
PC = Partial control
WEED SPECIES
Bermudagrass
Guineagrass
Texas and Florida Ridge
Florida Flatwoods
Paragrass
T orpedograss
B = Burndown
C = Control
[INSERT BRAND NAME] RATE PER ACRE
1 QT 2 QT 3 QT 5 QT
B PC C
B
B
S
C
B
C
C
C
C
PC
C
C
C
C
10.3 Miscellaneous Tree Food Crops
LABELED CROPS: Cactus (fruit and pads), Palm (heart, leaves), Palm (oil)
TYPES OF APPLICATION: Those listed in Section 10.0
Master Label 524-454 Page 40 of 139 Submitted August 26, 2009

I. MAIN LABEL FOR FOOD CROP USES
10.4 Non-Food Tree Crops
LABELED CROPS: Pine, Poplar, Eucalyptus, Christmas trees, All other non-food tree crops
TYPES OF APPLICATION: Those listed in Section10.0
NOTE: Unless otherwise directed, do not apply this product as an over-the-top broadcast spray in
plantations or tree crops.
Site preparation
USE INSTRUCTIONS: This product may be used for weed control prior to planting non-food tree crops.
PRECAUTIONS, RESTRICTIONS: Protect non-target plants from being sprayed with this product during
site preparation application.
Directed Spray, Spot Treatment, Wiper Applicator
USE INSTRUCTIONS: This product may be used as a post-directed spray and spot treatment or applied
with a wiper applicator around established poplar, eucalyptus, Christmas trees and other non-food tree
crops.
PRECAUTIONS, RESTRICTIONS: Avoid contact of spray, drift or mist of this product with foliage or
green bark of established Christmas trees and other pine trees. Desirable plants may be protected from
the spray solution by using shields or coverings made of impermeable materials.
10.5 Pome Fruit
LABELED CROPS: Apple, Crabapple, Loquat, Mayhaw, Pear (including oriental pear), Quince
TYPES OF APPLICATION: Those listed in Section10.0
PRECAUTIONS, RESTRICTIONS: Allow a minimum of 1 day between last application and harvest in
pome fruit crops.
10.6 Stone Fruit
LABELED CROPS: Apricot, Cherry (sweet, tart), Nectarine, Olive, Peach, Plum/Prune (all types), Plumcot
TYPES OF APPLICATION: Those listed in Section10.0. For olive groves, apply only as a directed spray.
PRECAUTIONS, RESTRICTIONS: Allow a minimum of 17 days between last application and harvest in
stone fruit crops.
Remove suckers and low-hanging limbs at least 10 days prior to application. Avoid application near trees
with recent pruning wounds or other mechanical injury. Apply only near trees that have been planted in
the orchard for 2 or more years. USE EXTREME CARE TO ENSURE THAT NO PART OF THE PEACH
TREE IS CONTACTED WITH OVERSPRAY OR DRIFT OF THIS PRODUCT.
10.7 Tree Nuts
LABELED CROPS: Almond, Beechnut, Betelnut, Brazil nut, Butternut, Cashew, Chestnut, Chinquapin,
Coconut, Filbert (hazelnut), Hickory nut, Macadamia, Pecan, Pine nut, Pistachio, Walnut (black, English)
TYPES OF APPLICATION: Those listed in Section 10.0
PRECAUTIONS, RESTRICTIONS: Allow a minimum of 3 days between last application and harvest of
tree nuts, except coconut. Allow 14 days between application and harvest of coconut.
10.8 Tropical and Subtropical Trees and Fruits
LABELED CROPS: Ambarella, Atemoya, Avocado, Banana, Barbados cherry (acerola), Biriba, Blimbe,
Breadfruit, Cacao (cocoa) bean, Canistel, Carambola (starfruit), Cherimoya, Coffee, Custard apple,
Master Label 524-454 Page 41 of 139 Submitted August 26, 2009

I. MAIN LABEL FOR FOOD CROP USES
Dates, Durian, Feijoa, Figs, Governor's plum, Guava, llama, Imbe, Imbu, Jaboticaba, Jackfruit, Longan,
Lychee, Mamey apple, Mango, Mangosteen, Marmaladebox (genip), Mountain papaya, Noni (Indian
Mulberry), Papaya, Pawpaw, Plantain, Persimmon, Pomegranate, Pulasan, Rambutan, Rose apple,
Sapodilla, Sapote (black, mamey, white), Spanish lime, Soursop, Star apple, Sugar apple, Surinam
cherry, Tamarind,Tea, Ti (roots and leaves),Wax jambu
TYPES OF APPLICATION: Those listed in Section 10.0, and as described below as a Bananacide
(Bananas Only)
PRECAUTIONS, RESTRICTIONS: Allow a minimum of 1 day between last application and harvest in
banana, coffee, guava, papaya, and plantain crops. Allow a minimum of 14 days between last application
and harvest for any other tropical or subtropical tree fruit listed. In coffee and banana, delay application 3
months after transplanting to allow the new coffee or banana plant to become established.
Bananacide (Banana Only)
USE INSTRUCTIONS: This product may be used to destroy banana plants infected with the Banana
Bunchy Top Virus, as well as non-infected banana plants in order to establish disease free buffers around
plantations. Remove all fruit from the plants within the treatment area prior to treatment. Inject 1/25 of a
fluid ounce (1 milliliter) of this concentrated product (undiluted) for every 2 to 3 inches of pseudostem
diameter of the banana plant. Make the injection at least one foot above the ground, except for very
small plants, which can be injected vertically into the top. Any subsequent re-growth must also be
destroyed. Mechanically destroy all plants and mats (or units) within a 4-foot radius around a treated mat.
For control of the Banana Bunchy Top Virus, it is critical that the grower follow a strict control program
involving monitoring for diseased plants, spraying to control the aphid vector, and destruction of all
infected mats (or units). An infected plant may not show symptoms of the banana bunchy top virus for up
to 125 days, therefore it is critical that the entire mat (or unit) containing the diseased plant be destroyed
immediately.
PRECAUTIONS, RESTRICTIONS: Do not apply more than 0.5 fluid ounce (15 milliliters) of this product
per mat (or unit). Remove all fruit from plants and mats (or units) prior to treatment. Do not harvest any
fruit or plant materials from treated mats (or units) following injection. Do not allow livestock to consume
treated plant materials. Following transplant of new banana plants into treated areas, allow plants to
become established for 3 months before applying this product for weed control.
10.9 Vine Crops
LABELED CROPS: Grapes (raisin, table, wine) Hops, Kiwi, Passion fruit
TYPES OF APPLICATION: Those listed in Section 10.0
USE INSTRUCTIONS: Apply this product for weed control only when green shoots, canes or foliage are
not in the spray zone.
In the northeast and Great Lakes regions, apply this product in grape vineyards prior to the end of the
bloom stage in order to avoid crop injury, or apply using a shielded sprayer or wiper applicator.
PRECAUTIONS, RESTRICTIONS: Allow a minimum of 14 days between last application and harvest of
vine crops. Do not use selective equipment in kiwi.
11.0 PASTURE GRASSES, FORAGE LEGUMES AND RANGELANDS
USE INSTRUCTIONS: Refer to the "ANNUAL WEEDS RATE SECTION" and "PERENNIAL WEEDS
RATE SECTION" of this label for application rates of this product for specific weeds. When applied as
directed, this product will control those annual and perennial grasses and broadleaf weeds. Application
rates specified on this label for the control of tough weeds, or those specified on separate supplemental
labeling for this product, supersede rates listed in the "ANNUAL WEEDS RATE SECTION", "PERENNIAL
Master Label 524-454 Page 42 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
WEEDS RATE SECTION" and "WOODY BRUSH AND TREES RATE SECTION" of this label. Additional
information on the control of tough weeds can be found in Fact Sheets published for this product.
11.1 Alfalfa, Clover, and Other Forage Legumes
LABELED CROPS: Alfalfa, Clover, Kenaf, Kudzu, Lespedeza, Leucaena, Lupin, Sainfoin, Trefoil, Velvet
bean, Vetch (all types)
TYPES OF APPLICATION: Preplant, At-Planting, Preemergence, Spot Treatment, Wiper Applicator,
Preharvest (except Kenaf and Leucanea), Stand Removal
For use directions with Roundup Ready alfalfa, see the "ROUNDUP READY CROPS" section of this
label.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting crops listed in this
section, but prior to crop emergence.
PRECAUTIONS, RESTRICTIONS: Remove domestic livestock before application.
Spot Treatment, Wiper Applicator
USE INSTRUCTIONS: This product may be applied as a spot treatment or over the top of crops listed in
this section with a wiper applicator. See additional instructions on the use of wiper applicators in the
"APPLICATION EQUIPMENT AND TECHNIQUES" section of this label. Application may be repeated in
the same area at 30-day intervals.
PRECAUTIONS, RESTRICTIONS: For spot treatment and use with a wiper applicator, apply in areas
where the movement of domestic livestock can be controlled. Remove domestic livestock before
application and wait 3 days after application before grazing livestock or harvesting. Do not treat more
than 10 percent of the total field area at anyone time.
Pre harvest (Except Kenaf and Leucanea), Stand Removal
USE INSTRUCTIONS: This product may be applied as a broadcast application prior to harvest (except in
kenaf and leucaena) in declining stands or any stand where severe crop injury or destruction is
acceptable, or to remove established stands of any forage legumes listed in this section. Application may
be made at any time of the year to control annual and perennial weeds, including quackgrass. For
control of quackgrass, apply in the spring, late summer or fall when quackgrass is actively growing.
Treatment for quackgrass must be followed by deep tillage for complete control. If the crop is to be
harvested or grazed by livestock, use up to a maximum of 2 quarts per acre in alfalfa and up to 3 pints
per acre in all other legumes listed on this label. For complete removal of established stands of clover, it
may be necessary to use a higher application rate, as listed in the 'PERENNIAL WEEDS RATE
SECTION" of this label.
PRECAUTIONS, RESTRICTIONS: This application may destroy an alfalfa stand, and may severely
injure or destroy other crops such as clover. Remove domestic livestock before application. Make only
one application to an existing stand of crop per year. The treated crop and weeds can be harvested and
fed to livestock according to the application rates and intervals defined below. For application rates higher
than those listed here, do not harvest for livestock feed or allow livestock to graze on treated foliage.
Maximum Single Preharvest Minimum Interval Between
Crop Application Rate Application and Harvest or
(per acre) Livestock Grazing
Alfalfa 2 quarts 36 hours
Master Label 524-454 Page 43 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
I All other legumes listed I 3 pints 3 days
Crops listed on this label may be planted into the treated area at any time; all other crops may be planted
30 days after application. Preharvest application on alfalfa grown for seed could result in a reduction in
germination or vigor. Buyer and all users are responsible for any and all loss or damage in connection
with the preharvest use of this product on alfalfa grown for seed.
11.2 Conservation Reserve Program (CRP)
TYPES OF APPLICATION: Renovation (Rotating Out of CRP), Site Preparation, Postemergence Weed
Control in Dormant CRP Grasses, Wiper Applicator
Renovation (Rotating Out of CRP), Site Preparation
USE INSTRUCTIONS: This product may be used to prepare CRP land for crop production. Refer to
Federal, state or local use guides for CRP renovation information.
PRECAUTIONS, RESTRICTIONS: Crops listed on this label may be planted into the treated area at any
time; all other crops may be planted 30 days after application.
Postemergence Weed Control in Dormant CRP Grasses, Wiper Applicator
USE INSTRUCTIONS: Apply this product to suppress competitive growth and seed production of
undesirable vegetation on CRP land. Application may be made using a wiper applicator to control tall
weeds or as a broadcast or spot treatment to dormant CRP grasses. For selective weed control using
broadcast spray equipment, apply 12 to 16 fluid ounces of this product per acre in early spring before
desirable CRP grasses, such as crested and tall wheatgrass, break dormancy and initiate green growth.
Late fall application can be made after desirable perennial grasses have reached dormancy.
PRECAUTIONS, RESTRICTIONS: Some stunting of CRP perennial grasses will occur if broadcast
application is made when plants are not dormant. No waiting period is required between application and
grazing or harvesting for feed. Do not apply more than 3 quarts of this product per acre per year onto
CRP land.
11.3 Grass Seed and Sod Production
LABELED CROPS: Any grass (Gramineae family), except Corn, Sorghum, Sugarcane and those listed in
the "CEREAL AND GRAIN CROPS" section of this label
TYPES OF APPLICATION: Preplant, At-Planting, Preemergence, Renovation, Removal of Established
Stand, Site Preparation, Shielded Sprayer, Wiper Applicator, Spot Treatment, Creating Rows in Annual
Ryegrass
Preplant, At·Planting, Preemergence, Renovation, Removal of Established Stand, Site Preparation
USE INSTRUCTIONS: This product controls most existing vegetation for purposes of renovating turf or
forage grass seed production areas, or for establishing turfgrass grown for sod. It may be used to destroy
undesirable grass vegetation when production fields are converted to alternate species or crops. Apply
before, during, or after planting, or for renovation purposes. For maximum control of existing vegetation,
delay planting to determine if any re-growth of underground plant parts occurs. Where existing
vegetation is growing under mowed turf management, apply this product after omitting at least one
regular mowing to allow sufficient growth for good interception of the herbicide spray. Where repeat
treatments are necessary, sufficient re-growth must be attained prior to application. For warm-season
grasses, such as bermudagrass, summer or fall application provides the best control. Broadcast
equipment may be used to control sod remnants or other unwanted vegetation after sod is harvested.
Application rates of up to 5 quarts per acre may be used to totally remove established stands of tough to
kill grass species.
Master Label 524-454 Page 44 of 139 Submitted August 26, 2009

I. MAIN LABEL FOR FOOD CROP USES
PRECAUTIONS, RESTRICTIONS: Do not disturb soil or underground plant parts before treatment.
Delay tillage or renovation techniques, including vertical mowing, coring or slicing, for 7 days after
application to allow for herbicide translocation into underground plant parts. If application rate is 3 quarts
per acre or less, no waiting period between treatment and feeding or livestock grazing is required. If the
rate is greater than 3 quarts per acre, remove domestic livestock before application and wait 8 weeks
after application before grazing or harvesting. Crops listed on this label may be planted into the treated
area at any time; all other crops may be planted 30 days after application. Application must be made prior
to the crop emergence in order to avoid crop injury.
Shielded Sprayer
USE INSTRUCTIONS: Apply 1 to 3 quarts of this product in 10 to 20 gallons of water per acre to control
weeds between grass seed rows. Uniform planting in straight rows will aid shielded sprayer application.
Best results are obtained when the grass seed crop is small enough to easily pass by or through the
protective shields. See additional instructions on the use of shielded sprayers in the "APPLICATION
EQUIPMENT AND TECHNIQUES" section of this label.
PRECAUTIONS, RESTRICTIONS: Contact of this product in any manner to any vegetation to which
treatment is not intended may cause damage. Such damage shall be the sole responsibility of the
applicator.
Wiper Applicator
USE INSTRUCTIONS: This product may be applied over the top of desirable grasses using a wiper
applicator for the control of tall weeds. See additional instructions on the use of wiper applicators in the
"APPLICATION EQUIPMENT AND TECHNIQUES" section of this label.
PRECAUTIONS, RESTRICTIONS: Droplets, mist, foam or splatter of the herbicide solution settling onto
desirable vegetation may result in discoloration, stunting or destruction. Such damage shall be the sole
responsibility of the applicator.
Spot Treatment
USE INSTRUCTIONS: Apply a 1 to 1.5-percent solution of this product using a hand-held sprayer to
control weeds within established vegetation prior to heading of grasses grown for seed or to control sod
remnants or other unwanted vegetation after sod is harvested.
PRECAUTIONS, RESTRICTIONS: Do not treat more than 10 percent of the total field area. Crop
sprayed in treated area will be killed. Take care not to spray or allow spray to drift outside the target area
to avoid unwanted crop destruction
Creating Rows in Annual Ryegrass
USE INSTRUCTIONS: Apply 16 to 32 fluid ounces of this product per acre. Best results are obtained
when application is made before ryegrass reaches 6 inches in height. Use the higher rate within this
range when the ryegrass is greater than 6 inches in height. Set nozzle heights to allow the establishment
of the desired row spacing. Use low-pressure nozzles, or drop nozzles designed to target the application
over a narrow band.
PRECAUTIONS, RESTRICTIONS: Take care not to spray or allow droplets, spray fines, or drift to settle
outside the treatment area to avoid unwanted crop destruction.
Grower assumes all responsibility for crop losses from misapplication.
11.4 Pastures
LABELED CROPS: Any grass (Gramineae family) except Corn, Sorghum, Sugarcane and those listed in
the "CEREAL AND GRAIN CROPS" section of this label, but including Bahiagrass, Bermudagrass,
Master Label 524-454 Page 45 of 139 Submitted August 26, 2009

l\1o+ \40
I. MAIN LABEL FOR FOOD CROP USES
Bluegrass, Bromegrass, Fescue, Guineagrass, Kikuya grass, Orchardgrass, Pangola grass, Ryegrass,
Timothy, Wheatgrass
TYPES OF APPLICATION: Preplant, Preemergence, Pasture Renovation, Spot Treatment, Wiper
Applicator, Postemergence Weed Control (Broadcast Treatment)
Preplant, Preemergence, Pasture Renovation
USE INSTRUCTIONS: This product may be applied for weed control prior to planting or emergence of
forage grasses. This product may also be used to control perennial pasture species listed on this label
prior to re-planting.
PRECAUTIONS, RESTRICTIONS: If application rates total 3 quarts of this product per acre or less, no
waiting period between treatment and feeding or livestock grazing is required. If the rate is greater than 3
quarts per acre, remove domestic livestock before application and wait 8 weeks after application before
grazing or harvesting. Crops listed on this label may be planted into the treated area at any time; all other
crops may be planted 30 days after application.
Spot Treatment, Wiper Applicator
USE INSTRUCTIONS: This product may be applied in pastures as a spot treatment or over the top of
desired grasses using a wiper applicator to control tall weeds. Application may be repeated in the same
area at 30-day intervals. See additional instructions on the use of wiper applicators in the "APPLICATION
EQUIPMENT AND TECHNIQUES" section of this label.
PRECAUTIONS, RESTRICTIONS: For spot treatment or use with a wiper applicator at rates of 3 quarts
of this product per acre or less, the entire field or any portion of it may be treated. For spot treatment or
wiper applicator use at rates above 3 quarts of this product per acre, no more than 10 percent of the field
may be treated at anyone time. To achieve maximum performance, remove domestic livestock before
application and wait 7 days after application before grazing or harvesting for feed.
Postemergence Weed Control (Broadcast Treatments)
USE INSTRUCTIONS: This product may be applied to pastures to suppress competitive growth and seed
production of annual weeds and undesirable vegetation. For selective weed control using broadcast
spray equipment, apply 12 to 16 fluid ounces of this product per acre in early spring before desirable
perennial grasses break dormancy and initiate green growth. Higher application rates to control tough-to
control weeds may be used; however, injury will occur if perennial grasses are no longer dormant. Late
fall application can be made after perennial grasses have reached dormancy.
PRECAUTIONS, RESTRICTIONS: Some stunting of perennial grasses will occur if broadcast application
is made when plants are not dormant. Higher application rates will cause stand reductions. No waiting
period is required between application and grazing or harvesting for feed. Do not apply more than 3
quarts per acre per year onto pasture grasses except for renovation use described on this label. If
replanting is needed due to severe stand reduction, wait at least 30 days after treatment prior to planting
any crop not listed on this label.
11.5 Rangelands
TYPES OF APPLICATION: Postemergence
USE INSTRUCTIONS: This product will control or suppress many annual weeds growing in perennial
cool- and warm-season grass rangelands. Preventing viable seed production is critical to the successful
control and invasion of annual grassy weeds in rangelands. Follow-up applications in sequential years
can be used to eliminate most of the viable seeds. Delay grazing of treated areas to allow desirable
perennials to grow, flower and re-seed in the treated area.
Master Label 524-454 Page 46 of 139 Submitted August 26, 2009

) 4~Ot \40
I. MAIN LABEL FOR FOOD CROP USES
Apply 12 to 16 fluid ounces of this product to control or suppress many weeds, including downy brome,
cheatgrass, cereal rye and jointed goatgrass in rangelands. Apply when most mature brome plants are in
early flower and before the plants, including seed heads, turn color. Allowing for secondary weed flushes
to occur in the spring following rain events further depletes the seed reserve and encourages perennial
grass conversion on weedy sites. Apply in the fall to areas where spring moisture is usually limited and
fall germination allows for good weed growth.
For medusa head, apply 16 fluid ounces of this product at the 3-leaf stage. Delaying application beyond
this stage will result in reduced or unacceptable control. Controlled burning prior to application may be
useful in eliminating the thatch layer produced by slowly decaying culms. Allow new growth to occur after
burning before spraying. Repeat applications in subsequent years may be necessary to eliminate the
seed bank before reestablishing desirable perennial grasses on medusahead-dominated rangeland.
PRECAUTIONS, RESTRICTIONS: Slight discoloration of the desirable grasses may occur, but they will
re-green and re-grow under moist soil conditions as effects of this product wear off. Do not use
ammonium sulfate when spraying rangeland grasses with this product. No waiting period between
treatment and feeding or livestock grazing is required. Do not apply more than 3 quarts of this product per
acre per year.
12.0 ROUNDUP READY CROPS
ROUNDUP READY CROPS CONTAIN A PATENTED GENE THAT PROVIDES TOLERANCE TO
GL YPHOSATE, THE ACTIVE INGREDIENT IN THIS PRODUCT. THIS PRODUCT WILL CAUSE
SEVERE CROP INJURY OR DESTRUCTION AND YIELD LOSS IF APPLIED TO CROPS THAT ARE
NOT GLYPHOSATE TOLERANT. AVOID CONTACT WITH FOLIAGE, GREEN STEMS, OR FRUIT OF
CROPS, OR ANY DESIRABLE PLANTS THAT DO NOT CONTAIN A GLYPHOSATE TOLERANCE
GENE, AS SEVERE PLANT INJURY OR DESTRUCTION WILL RESULT. Information on Roundup
Ready crops may be obtained from your seed supplier or Monsanto representative. Roundup Ready
crops must be purchased from an authorized licensed seed supplier
The instructions in the sections that follow, or those published separately on supplemental labeling for
this product include all applications of this product that can be made onto the specified Roundup Ready
crop during the complete cropping season. DO NOT combine these treatment instructions with those for
crops in the "ANNUAL AND PERENNIAL CROPS" and "PASTURE GRASSSES, FORAGE LEGUMES
AND RANGELANDS" sections of this label that do not contain a glyphosate tolerance gene.
NOTE: Roundup Ready seed, and the method of selectively controlling weeds in a Roundup Ready crop,
are protected under several U.S. Patents, including 5,352,605 and 5,633,435. A license to use Roundup
Ready seed must be obtained prior to use. Monsanto retains ownership of the gene and process
technologies, and the Purchaser of the seed receives the right to use the licensed genes and
technologies subject to the limited use license conditions. Seed containing a Roundup Ready trait cannot
be used for research and demonstration, reverse engineering or in connection with herbicide registration.
Progeny seed containing the Roundup Ready trait cannot be saved for replanting or transferred to others
for replanting. Contact your Authorized Monsanto Retailer for information on obtaining a limited use
license.
USE INSTRUCTIONS: Refer to "ANNUAL WEEDS RATE SECTION" and "PERENNIAL WEEDS RATE
SECTION" of this label for application rates for specific weeds. When applied as directed, this product
will control the annual and perennial grasses and broad leaf weeds listed. Observe the maximum
application rates and crop stage timings specified for individual Roundup Ready crops in the sections that
follow.
Ground broadcast application - Apply this product in 5 to 20 gallons of spray solution per acre.
Carefully select proper nozzle and spray pressure to avoid spraying a fine mist. For best results with
ground application equipment, use flat spray nozzles. Check for even distribution of spray droplets.
Master Label 524-454 Page 47 of 139 Submitted August 26, 2009

) )
I. MAIN LABEL FOR FOOD CROP USES
Aerial application - All treatments described in this section may be made using aerial application
equipment, where appropriate, provided that the applicator complies with the precautions and restrictions
specified on this label and on all supplemental labeling published separately for this product. Apply this
product in 3 to 15 gallons of water per acre. See the "APPLICATION EQUIPMENT AND TECHNIQUES"
section of this label for important information on aerial application and procedures for avoiding spray drift
that may cause injury to any vegetation not intended for treatment. Use of appropriate buffer zones will
help prevent injury to adjacent vegetation.
ATTENTION: AVOID DRIFT. EXTREME CARE MUST BE USED WHEN APPLYING THIS PRODUCT
TO PREVENT INJURY TO DESIRABLE PLANTS AND CROPS THAT DO NOT CONTAIN A
GLYPHOSATE TOLERANCE GENE.
TANK MIXTURE: Tank mixtures of this product with other herbicides, insecticides, fungicides,
micronutrients or foliar fertilizers could result in reduced weed control or injury to Roundup Ready crops
when applied over the top of Roundup Ready crops. Read all labels for products used in the tank mixture
prior to use to determine the potential for crop injury. Always read and follow label directions for all
products in the tank mixture. Use all products according to rates and timing specified on the product
labeling. Always predetermine the compatibility of tank-mix products together in the carrier by mixing
small proportional quantities in advance. [INSERT COMPANY NAME] has not tested all tank-mix
product formulations for compatibility, antagonism or product performance. Buyer and all users are
responsible for any and all loss or damage in connection with the use or handling of mixtures of this
product with herbicides or other materials that are not specifically identified on this label or in separate
supplemental labeling or Fact Sheets for this product. See the "MIXING" section of this label for more
information on tank mixtures.
Unless otherwise directed, nonionic surfactant may be added to the spray solution for application to
Roundup Ready crops. The addition of certain surfactants to this product may result in some crop
response including leaf speckling or leaf necrosis due to the surfactant added to the spray mixture. Refer
to the individual Roundup Ready crop sections that follow, or separately published supplemental labeling,
for additional precautions or restrictions. Refer to the "MIXING" section of this label for additional
information on the use of surfactants.
Ammonium sulfate may be added to spray solutions of this product for application to Roundup Ready
crops. Refer to the "MIXING" section for instructions on the use of ammonium sulfate.
Sprayer Preparation: It is important that sprayer and mixing equipment be clean and free of pesticide
residue before being used to apply this product. Follow the cleaning procedures specified on the label of
the product(s) previously used. THOROUGHLY CLEAN THE SPRAY TANK AND ALL LINES AND
FILTERS TO ELIMINATE POTENTIAL CONTAMINATION FROM OTHER HERBICIDES PRIOR TO
MIXING AND APPLYING THIS PRODUCT.
NOTE: The following use directions are based on a clean start at planting by using a burndown
application or tillage to control existing weeds before crop emergence. In no-till and stale seedbed
systems, apply this product as a pre plant burn-down treatment to control existing weeds prior to crop
emergence. Some weeds, such as black nightshade, broadleaf signalgrass, sicklepod, Texas panicum,
sandbur, annual morningglory, woolly cupgrass, shattercane, wild proso millet, burcumber, and giant
ragweed with multiple germination times, or suppressed (stunted) weeds may require a second
application of this product for complete control. Make second application after some re-growth has
occurred and at least 10 days after a previous application of this product.
Application rates of this product specified on this label for the control of tough weeds, or those specified
on separate supplemental labeling for this product, supersede rates in the "ANNUAL WEEDS RATE
SECTION" and "PERENNIAL WEEDS RATE SECTION" of this label. Additional information on the
control of tough weeds can be found on Fact Sheets published for this product.
Master Label 524-454 Page 48 of 139 Submitted August 26, 2009

I. MAIN LABEL FOR FOOD CROP USES
PRECAUTIONS, RESTRICTIONS: Observe the maximum application rates stated throughout this label.
Maximum application rates apply to the use of this product combined with the use of any and all other
herbicides containing glyphosate as the active ingredient, whether applied separately or as mixtures.
Calculate the application rates (glyphosate acid equivalents) and ensure that the total use of this and
other glyphosate-containing products does not exceed the stated maximum rate. See the "PRODUCT
INFORMATION" section of this label for more information on Maximum Application Rates.
12.1 Roundup Ready Alfalfa
TYPES OF APPLICATION: Preplant, At-planting, Preemergence, Postemergence (In-crop)
USE INTRUCTIONS: Refer to the following table for the maximum application rates of this product.
Maximum Application Rates
Combined total per year for all applications, including preplant 8 quarts per acre during year of establishment
Combined total per year for in-crop applications on newly 6 quarts per acre established and established stands
PRECAUTIONS AND RESTRICTIONS: See the "ROUNDUP READY CROPS" section of this label for
precautionary instructions regarding the use of this product in Roundup Ready crops. See the
"PRODUCT INFORMATION" section of this label for more information on Maximum Application Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting Roundup Ready
alfalfa.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied over the top of Roundup Ready alfalfa (in-crop) from
emergence until 5 days prior to cutting. To maximize crop yield and quality potential of the forage and
hay, apply this product after weeds have emerged but before alfalfa growth or re-growth interferes with
spray coverage of the target weeds.
Refer to the "ANNUAL WEEDS RATE SECTION" and "PERENNIAL WEEDS RATE SECTION" of this
label for application rates for specific weeds. When applied as directed, this product will control these
annual and perennial grasses and broad leaf weeds. This product will also suppress the parasitic weed
Dodder (CusGuta spp.) in Roundup Ready alfalfa. Repeat applications may be necessary for complete
control.
New Stand Establishment {Seeding Year)-Due to the biology and breeding constraints of alfalfa, up to
10 percent of the seedlings may not contain a Roundup Ready gene and will not survive after the first
application of this product. To eliminate the undesirable effects of stand gaps created by this loss of
plants, make a single application of at least 1 quart of this product per acre at or before the 4-trifoliate
growth stage. Refer to the following tables for application rates during stand establishment (seeding
year).
NEW STAND ESTABLISHMENT (Seeding Year)
Application Rates
Prior to First Cutting
From emergence up to 4 trifoliate leaves I 1 to 2 quarts per acre
Master Label 524-454 Page 49 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
From 5 trifoliate leaves up to 5 days before first Up to 2 quarts per acre cutting
After First Cutting
In-crop application, per cutting, up to 5 days before Up to 2 quarts per acre cutting
Established Stands-Refer to the following table for directions and maximum application rates for in
crop applications to established stands of alfalfa (non-seeding year).
ESTABLISHED STANDS (Non-seeding Year)
Application Rates
In-crop applications, per cutting, up to 5 days Up to 2 quarts per acre before cutting
PRECAUTIONS, RESTRICTIONS: Where Roundup Ready alfalfa is grown with a companion or cover
crop, or is over-seeded with a second species, in-crop (over-the-top) application of this product will
eliminate the non-glyphosate tolerant species. Do not exceed 2 quarts per acre for any single in-crop
application of this product. Sequential applications of this product must be at least 7 days apart. The
combined total per year for all in-crop applications in both newly established (seeding year) and
established stands (non-seeding year) must not exceed 6 quarts per acre. Remove domestic livestock
before application. Wait a minimum of 5 days after application before grazing, cutting and feeding of
forage and hay.
TANK MIXTURES: This product may be tank-mixed with the products listed in following sections. Ensure
that the specific product being used is labeled for application to alfalfa. Read and follow label directions
for all products in the tank mixture.
New Stand Establishment (Seeding Year): This product may be applied postemergence (in-crop) over
the top of Roundup Ready alfalfa in the seeding year at up to 2 quarts per acre in a tank-mix with the
following herbicides. Apply after weeds have emerged, but before the alfalfa growth or re-growth
interferes with spray coverage of the target weeds.
[Insert active ingredient(s) or brand name of product(s) containing the following active ingredients
that, at the time of printing, are registered for use on alfalfa:
clethodim, imazamox, imazethapyr, sethoxydim, quizalofop p-ethyl
Assure II, Poast, Prism, Pursuit, Raptor, SelectMAX]
[Optional statement: Pursuit or Raptor applied to seedling alfalfa may result in a temporary
reduction in growth. Do not include crop oil concentrate or methylated seed oil in tank mixtures
of this product with Pursuit or Raptor as unsatisfactory crop injury may result.]
Established Stands (Non-Seeding Year)
This product may be applied postemergence (in-crop) over the top of established stands of Roundup
Ready alfalfa in tank mixtures described below according to the growing conditions of the crop.
Actively growing alfalfa: For control of emerged grasses and broadleaf weeds when alfalfa is actively
growing, this product may be applied at up to 44 fluid ounces per acre in a tank mixture with the following
herbicides.
Master Label 524-454 Page 50 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
[Insert active ingredient(s) or brand name of product(s) containing the following active ingredients
that, at the time of printing, are registered for use on alfalfa:
clethodim, imazamox, imazethapyr, sethoxydim, quizalofop p-ethyl
Assure II, Poast, Prism, Pursuit, Raptor, SelectMAX]
[Optional statement: Do not include crop oil concentrate or methylated seed oil in tank mixtures of
this product with Pursuit or Raptor as unsatisfactory crop injury may result.]
Dormant alfalfa: For control of emerged annual grasses and broad leaf weeds when alfalfa is dormant,
this product may be applied at up to 44 fluid ounces per acre in a tank mixture with the following
herbicides. Apply when the daily temperature remains above freezing.
[Insert active ingredient(s) or brand name of product(s) containing the following active
ingredients that, at the time of printing, are registered for use on alfalfa:
imazamox, imazethypyr, metribuzin, pronamide, propyzamide
Kerb 50-W, Lexone, Pursuit, Raptor, Sencor]
[Optional statement: Do not include crop oil concentrate or methylated seed oil in tank
mixtures of this product with Pursuit or Raptor as unsatisfactory crop injury may result.]
PRECAUTIONS, RESTRICTIONS: Tank mixtures of this product with other herbicides, insecticides, or
fungicides may result in crop injury or reduced weed control. Do not apply to frozen or snow covered
ground. Ensure that the specific product being used is labeled for application postemergence (in-crop) to
alfalfa. Read and follow label directions of all products in the tank mixture. Refer to individual tank-mix
product label for restrictions and precautions; use according to the most restrictive precautionary
statements for each product in the tank mixture.
12.2 Roundup Ready Canola (Spring Varieties)
Roundup Ready spring canola is defined as those Roundup Ready canola varieties that are seeded in
the spring and harvested in the fall and do not enter a winter dormancy period.
TYPES OF APPLICATION: Preplant, At-Planting, Preemergence, Postemergence (In-crop)
USE INSTRUCTIONS: Refer to the following table for the maximum application rates for this product with
spring varieties of Roundup Ready canola.
Maximum Application Rates
Total of all Preplant, At-Planting, Preemergence 2 quarts per acre applications
Total of all In-crop Applications from emergence to 1 quart per acre 6-Leaf Stage
PRECAUTIONS AND RESTRICTIONS: See the "ROUNDUP READY CROPS" section of this label for
precautionary instructions regarding the use of this product in Roundup Ready crops. See the
"PRODUCT INFORMATION" section of this label for more information on Maximum Application Rates.
Preplant, At-planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting Roundup Ready
canola.
Master Label 524-454 Page 51 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
PRECAUTIONS, RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant,
at-planting and preemergence applications combined is 2 quarts per acre per season.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied postemergence to spring varieties of Roundup
Ready canola from emergence through the 6-leaf stage of development. Application made during bolting
or flowering could result in crop injury and yield loss. To maximize yield potential, eliminate competing
weeds early.
Single Application - Apply 16 to 24 fluid ounces per acre no later than the 6-leaf stage for the control of
annual weeds. Avoid overlapping applications, which could result in temporary yellowing, delayed
flowering, and/or growth reduction. Similar crop injury could result when more than 16 fluid ounces per
acre is applied after the 4-leaf stage.
Sequential Application - Apply 16 fluid ounces per acre to 1 to 3-leaf canola followed by a sequential
application at a minimum interval of 10 days, but no later than the 6-leaf stage. Sequential application
works best for control of early emerging annual weeds and perennial weeds such as Canada thistle and
quackgrass, or when more that one application is needed for adequate weed control.
PRECAUTIONS, RESTRICTIONS: No more than two in-crop (over-the-top) broadcast applications may
be made from crop emergence through the 6-leaf stage of development and the total in-crop application
must not exceed 32 fluid ounces of this product per acre. Allow a minimum of 60 days between last
application and canola harvest.
12.3 Roundup Ready Canola (Winter Varieties)
Roundup Ready winter canola is defined as those Roundup Ready canola varieties that are seeded in
early fall and harvested the following spring or summer. Winter canola varieties are intended to enter a
cold period dormancy in the winter.
TYPES OF APPLICATION: Preplant, At-Planting, Preemergence, Postemergence (In-crop)
USE INSTRUCTIONS: Refer to the following table for the maximum application rates of this product with
winter varieties of Roundup Ready canola.
Maximum Application Rates
Total of all Preplant, At-Planting, Preemergence applications 2 quarts per acre
Total of allin-crop applications from emergence to canopy 2 quarts per acre closure or prior to bolting in the spring
PRECAUTIONS, RESTRICTIONS: See the "ROUNDUP READY CROPS" section of this label for
precautionary instructions regarding the use of this product in Roundup Ready crops. See the
"PRODUCT INFORMATION" section of this label for more information on Maximum Application Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting Roundup Ready
canola.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied to winter varieties of Roundup Ready canola from
emergence to canopy closure in the fall and prior to bolting in the spring. Application made during or after
bolting could result in crop injury and yield loss. To maximize yield potential, eliminate competing weeds
early.
Master Label 524-454 Page 52 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
Some weeds with multiple germination times, or suppressed (stunted) weeds, or weeds that have
overwintered may require a sequential application of this product for control. Make second application
after some weed re-growth has occurred and at least 60 days after a previous application of this product.
Single Application-Apply 24 to 32 fluid ounces of this product per acre in the fall when weeds are small
and actively growing. Use the higher rate within this range when weed densities are high, when weeds
have overwintered or when weeds become large and well established. Application of greater than 24
fluid ounces per acre prior to the 6-leaf stage may result in reduced crop growth in the fall. Avoid spray
overlaps. Spray overlaps could result in temporary yellowing and/or growth reduction.
Sequential Application-Apply 16 to 32 fluid ounces of this product per acre to 2-leaf or larger canola in
the fall, followed by a sequential application at the same rate and at a minimum interval of 60 days, but
before bolting in the spring. Sequential application works best for control of early emerging annual weeds
and winter emerging weeds such as downy brame, jointed goatgrass and ryegrass, and for weeds that
have overwintered. This product will control or suppress most perennial weeds. For some perennial
weeds, sequential application may be required to reduce competition with the crop.
PRECAUTIONS, RESTRICTIONS: No more than two over-the-top broadcast applications may be made
from crop emergence up to the onset of bolting, and the total in-crop application must not exceed 64 fluid
ounces of this product per acre. Application of greater than 24 fluid ounces per acre prior to the 6-leaf
stage could result in reduced crop growth in the fall. Allow a minimum of 60 days between last application
and harvest of canola grain. No waiting period is required between application and open grazing of
livestock.
12.4 Corn Hybrids with Roundup Ready 2 Technology
Corn hybrids with Roundup Ready 2 Technology include Roundup Ready Corn 2 and seed products
displaying the Roundup Ready 2 Technology logo.
TYPES OF APPLICATION: Preplant, At-Planting, Preemergence, Postemergence (In-crop), Spot
Treatment, Preharvest, Post-harvest
USE INSTRUCTIONS: Refer to the following table for maximum application rates of this product with corn
hybrids with Roundup Ready 2 Technology.
Maximum Application Rates
Combined total per year for all applications 8 quarts per acre
Total of all Preplant, At-Planting, Preemergence applications 5 quarts per acre
Total of all In-crop applications from emergence through 48-inch 3 quarts per acre corn
Maximum preharvest application rate after maximum kernel fill is
complete and the crop is physiologically mature (black layer 1 quart per acre
formed) until 7 days before harvest*
*See PRECAUTIONS, RESTRICTIONS section for Preharvest application.
PRECAUTIONS, RESTRICTIONS: See the "ROUNDUP READY CROPS" section of this label for
precautionary instructions regarding the use of this product in Roundup Ready crops. See the
"PRODUCT INFORMATION" section of this label for more information on Maximum Application Rates.
The use of the in-crop (over-the-top) rates described in these instructions on other than corn hybrids with
Roundup Ready 2 Technology may cause crop injury and reduced yields.
Preplant, At-planting, Preemergence
Master Label 524-454 Page 53 of 139 Submitted August 26, 2009

) )
I. MAIN LABEL FOR FOOD CROP USES
USE INSTRUCTIONS: This product may be applied alone or in a tank mixture before, during or after
planting.
TANK MIXTURES: This product may be tank-mixed with the products listed below. Ensure that the
specific product being used is labeled for application prior to the emergence of corn. Read and follow
label directions for all products in the tank mixture. Apply these tank mixtures in 10 to 20 gallons of
water, or 10 to 60 gallons of nitrogen solution per acre.
[Insert active ingredient(s) or brand name of product(s) containing the following active ingredients
that, at the time of printing, are registered for use preplant, at-planting and/or preemergence to
corn:
2,4-0, acetochlor, alachlor, atrazine, carfentrazone-ethyl, clopyralid, dicamba, diflufenzopyr,
dimethenamid, dimethenamid-p, f1ufenacet, f1umetsulam, flumiclorac pentyl ester, isoxaflutole,
linuron, metolachlor, s-metolachlor, metribuzin, pendimethalin, rimsulfuron, simazine
Aim, Aim EC, Axiom, Balance, Balance PRO, Banvel, Bicep MAGNUM, Bicep II MAGNUM, Bicep
Lite II MAGNUM, Bullet, Cinch, Cinch ATZ, Clarity, Define, Degree, Degree Xtra, Distinct, Dual
MAGNUUM, Dual II MAGNUM, Epic, Frontier, FulTime, Guardsman, Guardsman MAX, Harness,
Harness Xtra, Harness Xtra 5.6L, Hornet, Keystone, Keystone LA, Lariat, Leadoff, Linex, Lorox,
Marksman, Me-Too-Lachlor II, Micro-Tech, Outlook, Prowl, Python, Python II, Radius, Resolve,
Resource, Shark, Stalwart, Stalwart C, Stalwart Xtra, Surpass, TopNotch]
PRECAUTIONS, RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant,
at-planting and preemergence applications combined is 5 quarts per acre per season. Refer to individual
tank-mix product label for restrictions and precautions; use according to the most restrictive precautionary
statements for each product in the tank mixture.
NOTE: For maximum weed control, make a postemergence (in-crop) application of this product following
the use of the preemergence residual products listed above.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied alone or in a tank mixture over the top of corn
hybrids with Roundup Ready 2 Technology from emergence through the V8 stage (8 leaves with collars),
or until corn height reaches 30 inches (free standing), whichever comes first. Use drop nozzles for
optimum spray coverage and weed control when corn height is 24 to 30 inches. For corn heights 30 to
48 inches (free standing), apply this product using only ground application equipped with drop nozzles
aligned to avoid spraying into the whorls of the corn plants. Single in-crop application of this product up to
48-inch corn must not exceed 3 pints per acre. Sequential in-crop applications of this product from
emergence through 48 inches in height must not exceed 3 quarts per acre per growing season.
When applied as directed, this product will control annual grasses and broadleaf weeds listed on this
label. Many perennial grasses and broadleaf weeds will be controlled or suppressed with one or more
application of this product. Make a postemergence application of 24 to 32 fluid ounces of this product per
acre before weeds exceed 4 inches in height (before they become competitive with the crop). Repeat
this application before new flushes of weeds exceed 4 inches in height.
TANK MIXTURES: This product may be tank-mixed with the following products. Ensure that the specific
product being used is labeled for application postemergence (in-crop) to corn. Read and follow label
directions of all products in the tank mixture.
[Insert active ingredient(s) or brand name of product(s) containing the following active ingredients
that, at the time of printing, are registered for use postemergence (in-crop) to corn:
Master Label 524-454 Page 54 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
2,4-D, atrazine, acetochlor, alachlor, carfentrazone-ethyl, clopyralid, dicamba, diflufenzopyr,
f1umetsulam, f1umiclorac pentyl ester, foramsulfuron, halosulfuron-methyl, iodosulfuron-methyl
sodium, mesotrione, nicosulfuron, rimsulfuron, thifensulfuron methyl, tropamezone
Aim EC, Banvel, Basis, Basis Gold, Bullet, Callisto, Clarity, Degree, Degree Xtra, Distinct, Equip,
Harness, Harness Xtra, Harness Xtra 5.6L, Hornet, Impact, Marksman, Micro-Tech, Option,
Resolve, Resource, Status]
Tank-Mix Partner Maximum Height of Corn
at Application
Degree
Degree Xtra
Harness 11 inches
Harness Xtra
Harness Xtra 5.6L
Bullet* 5 inches Micro-Tech*
atrazine 12 inches
*Bullet and Micro-Tech are not registered for use as a postemergence application in Texas.
The addition of 1 to 2 percent dry ammonium sulfate by weight or 8.5 to 17 pounds per 100 gallons of
water may increase the performance of this product under hard water conditions, drought conditions or
when tank mixed with Bullet® or Micro-Tech® herbicides.
PRECAUTIONS, RESTRICTIONS: Allow a minimum of 10 days between in-crop applications of this
product. Allow a minimum of 50 days between application of this product in-crop and harvest of corn
forage or grain. Refer to individual tank-mix product label for restrictions and precautions; use according to
the most restrictive precautionary statements for each product in the tank mixture.
Preharvest
USE INSTRUCTIONS: This product may be applied for annual and perennial weed control prior to crop
harvest at use rates of up to 32 fluid ounces per acre. Make application at 35 percent grain moisture or
less. Ensure that maximum kernel fill is complete and the corn is physiologically mature (black layer
formed).
PRECAUTIONS, RESTRICTIONS: A preharvest application of this product may only be made if the
combined total of previously applied over-the-top or drop nozzle applications does not exceed 64 fluid
ounces of this product per acre. Allow a minimum of 7 days between a preharvest application and harvest
or feeding of corn stover or grain.
Post-Harvest
USE INSTRUCTIONS: This product may be applied for weed control after corn harvest. Higher rates
may be required for control of large weeds that were growing in the crop at the time of harvest. Tank
mixtures with 2,4-D or dicamba may be used. Ensure that the specific product being used is labeled for
post-harvest application in corn. Read and follow label directions of all products in the tank mixture.
PRECAUTIONS, RESTRICTIONS: Allow a minimum of 7 days between treatment and harvest or feeding
of treated vegetation.
12.5 Roundup Ready Cotton
TYPES OF APPLICATION: Preplant, At-Planting, Preemergence, Postemergence (In-crop), Selective
Equipment (In-Crop), Preharvest
Master Label 524-454 Page 55 of 139 Submitted August 26, 2009

I. MAIN LABEL FOR FOOD CROP USES
USE INSTRUCTIONS: Refer to the following table for maximum application rates of this product with
Roundup Ready cotton.
Maximum Application Rates
Combined total per year for all applications 8 quarts per acre
Total of all Preplant, At-Planting, Preemergence 5 quarts per acre applications
Total of all In-crop applications from ground cracking to 4 quarts per acre layby
Maximum Pre harvest application rate 2 quarts per acre
Combined total of all In-crop applications from 6 quarts per acre emergence through harvest
PRECAUTIONS, RESTRICTIONS: See the "ROUNDUP READY CROPS" section of this label for
precautionary instructions regarding the use of this product in Roundup Ready crops. The combined total
application of this product from cotton emergence through harvest must not exceed 6 quarts per acre.
Allow a minimum of 7 days between application and harvest. See the "PRODUCT INFORMATION"
section of this label for more information on Maximum Application Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting Roundup Ready
cotton.
TANK MIXTURES: This product may be tank-mixed with 2,4-D and Clarity and applied prior to planting
only. This product may be tank-mixed with the following products and applied prior to crop emergence.
Ensure that the specific product being used is labeled for application prior to the emergence of cotton.
Read and follow label directions of all products in the tank mixture.
[Insert active ingredient(s) or brand name of product(s) containing the fol/owing active ingredients
that, at the time of printing, are registered for use prior to the emergence of cotton:
clomazone, diuron, flumioxazin, fluometuron, fomesafen, metolachlor, s-metolachlor,
pendimethalin, prometyrn, pyrithiobac-sodium
Caparol, Command, Cotoran, Cotton PRO, Direx, Dual MAGNUM, Dual II MAGNUUM, Karmex,
Meturon, PARRLAY, Prowl, Prowl H20, Relfex, Stalwart, Staple, Valor, Zorial]
PRECAUTIONS, RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant,
at-planting and preemergence applications combined is 5 quarts per acre per season. Refer to individual
tank-mix product label for restrictions and precautions. Use according to the most restrictive
precautionary statements for each product in the tank mixture.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied over the top Roundup Ready cotton (in-crop) at rates
up to 1 quart per acre per application from the ground cracking stage until the 4-leaf (node) stage of
development (until the fifth true leaf reaches the size of a quarter). NO MORE THAN TWO OVER-THE
TOP BROADCAST APPLICATIONS MAY BE MADE FROM CROP EMERGENCE THROUGH THE 4-
LEAF (NODE) STAGE OF DEVELOPMENT. SEQUENTIAL OVER-THE-TOP OR POST-DIRECTED
APPLICATIONS OF THIS PRODUCT IN-CROP MUST BE AT LEAST 10 DAYS APART AND COTTON
MUST HAVE AT LEAST TWO NODES OF INCREMENTAL GROWTH BETWEEN APPLICATIONS.
Master Label 524-454 Page 56 of 139 Submitted August 26, 2009

~Ot\4D
I. MAIN LABEL FOR FOOD CROP USES
Over-the-top application made after the 4-leaf (node) stage of development could result in boll
loss, delayed maturity andlor yield loss.
TANK MIXTURES: This product may be tank-mixed with the following products and applied over the top
of Roundup Ready cotton up to the 4-leaf stage. Ensure that the specific product being used is labeled
for application postemergence (in-crop) to cotton. Read and follow label directions of all products in the
tank mixture.
[Insert active ingredient(s) or brand name of product(s) containing the following active ingredients
that, at the time of printing, are registered for use postemergence (in-crop) to cotton:
clethodim, f1uazifop-P-butyl, fomesafen, metolachlor, s-metolachlor, pyrithiobac-sodium,
sethoxydim, quizalofop-P-ethyl
Assure II, Dual MAGNUM, Fusilade, Poast Plus, Select, Stalwart, Staple]
[Optional text: Staple may cause leaf yellowing and/or leaf crinkling when applied postemergence
(in-crop) to Roundup Ready cotton. Dual Magnum and Stalwart applied over the top of Roundup
Ready cotton may cause leaf injury in the form of necrotic spotting.]
Salvage Treatment-this treatment may be used after the 4-leaf stage of development and only where
weeds threaten to cause the loss of the crop. Apply 1 quart per acre either as an over-the-top application
or as a post-directed treatment sprayed higher on the cotton plants and over the weeds. NOTE:
SALVAGE TREATMENT WILL RESULT IN SIGNIFICANT BOLL LOSS, DELAYED MATURITY AND/OR
YIELD LOSS. NO MORE THAN ONE SALVAGE TREATMENT MAY BE USED PER GROWING
SEASON.
PRECAUTIONS, RESTRICTIONS: The maximum quantity of this product that may be applied for all in
crop applications from ground-cracking to layby combined is 4 quarts per acre per season. DO NOT
ADD ADDITONAL SURFACTANT OR ADDITIVES CONTAINING SURFACTANT TO THIS PRODUCT
(OTHER THAN THOSE CONTAINED IN ANY TANK-MIX PRODUCT) FOR OVER-THE-TOP
APPLICATIONS TO ROUNDUP READY COTTON.
Selective Equipment (In-crop)
USE INSTRUCTIONS: This product may be applied using precision post-directed or hooded sprayers at
rates up to 1 quart per acre per application to Roundup Ready cotton through layby. At this stage, use
post-directed equipment to direct the spray to the base of the cotton plants. Avoid contact of the herbicide
spray with the cotton leaves to the maximum extent possible. To minimize spray contact maintain low
spray pressure (less than 30 pounds per square inch) and place nozzles in a low position, directing a
horizontal spray pattern under the cotton leaves and onto weeds in the row. For best results, apply this
product while weeds are small (less than 3 inches). See additional use instructions in the "APPLICATION
EQUIPMENT AND TECHNIQUES" section of this label.
TANK MIXTURES: This product can be tank-mixed with the following products for in-crop application
using precision post-directed or hooded sprayers. Ensure that the specific product being used is labeled
for application postemergence (in-crop) to cotton. Read and follow label directions of all products in the
tank mixture.
[Insert active ingredient(s) or brand name of product(s) containing the following active ingredients
that, at the time of printing, are registered for use postemergence (in-crop) to cotton:
carfentrazone-ethyl, diuron, f1umioxazin, f1uometuron, linuron, pendimethalin, prometyrn,
pyrithiobac-sodium, trifloxysulfuron-sodium
Aim, Caparol, Cotoran, Direx, Layby-Pro, Prowl H20, Staple, Valor]
Master Label 524-454 Page 57 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
[Optional text: Staple may cause leaf yellowing and/or leaf crinkling when applied postemergence
(in-crop) to Roundup Ready cotton.]
PRECAUTIONS, RESTRICTIONS: Maximum quantity of this product that may be applied for all in-crop
applications from ground-cracking to layby combined is 4 quarts per acre per season. NO MORE THAN
TWO APPLICATIONS OF THIS PRODUCT MAY BE MADE FROM THE 5-LEAF STAGE THROUGH
LAYBY. SEQUENTIAL OVER-THE-TOP OR POST-DIRECTED APPLICATIONS OF THIS PRODUCT
IN-CROP MUST BE AT LEAST 10 DAYS APART AND COTTON MUST HAVE AT LEAST TWO NODES
OF INCREMENTAL GROWTH BETWEEN APPLICATIONS. Refer to individual tank-mix product label
for restrictions and precautions; use according to the most restrictive precautionary statements for each
product in the tank mixture.
Preharvest
USE INSTRUCTIONS: This product may be applied for annual and perennial weed control prior to crop
harvest after 20 percent boll crack. Apply up to 2 quarts of this product per acre. NOTE: This product will
not enhance the performance of harvest aids when applied to Roundup Ready cotton.
PRECAUTIONS, RESTRICTIONS: Allow a minimum of 7 days between application and harvest of cotton.
Do not apply this product for preharvest weed control to Roundup Ready cotton grown for seed, as a
reduction in germination or vigor may occur. Buyer and all users are responsible for any and all loss or
damage in connection with the preharvest use of this product on Roundup Ready cotton grown for seed.
DO NOT ADD ADDITIONAL SURFACTANT OR ADDITIVES CONTAINING SURFACTANT TO THIS
PRODUCT FOR PREHARVEST APPLICATION TO ROUNDUP READY COTTON.
ATTENTION: USE OF THIS PRODUCT IN ACCORDANCE WITH LABEL DIRECTIONS IS EXPECTED
TO RESULT IN NORMAL GROWTH OF ROUNDUP READY COTTON, HOWEVER, DUE TO THE
SENSITIVITY OF COTTON FRUITING TO VARIOUS ENVIRONMENTAL CONDITIONS, AGRONOMIC
PRACTICES AND OTHER FACTORS IT IS IMPOSSIBLE TO ELIMINATE ALL RISKS ASSOCIATED
WITH THIS PRODUCT, EVEN WHEN APPLICATIONS ARE MADE IN CONFORMANCE WITH THE
LABEL SPECIFICATIONS. IN SOME CASES, THESE FACTORS CAN RESULT IN BOLL LOSS,
DELAYED MATURITY ANDIOR YIELD LOSS.
12.6 Roundup Ready Flex Cotton
The instructions provided in this section are specific to, and may only be used with, varieties
designated as Roundup Ready Flex cotton. Applications described in this section on other than
Roundup Ready Flex cotton will cause crop injury and reduced yields. DO NOT combine the
instructions in this section, with those in the "Roundup Ready Cotton" section of this label, or
with any other Roundup Ready cotton or Roundup Ready Flex cotton instructions on labeling for
this or any other glyphosate-containing products. Drift of this product from an application made
to Roundup Ready Flex cotton onto adjacent fields of post 4-leaf (node) Roundup Ready cotton
may cause extensive injury including boll loss, delayed maturity andlor yield loss.
TYPES OF APPLICATION: Preplant, At-Planting, Preemergence, Postemergence (In-crop), Preharvest
USE INSTRUCTIONS: Refer to the following table for maximum application rates of this product with
Roundup Ready Flex cotton.
Maximum Application Rates
Combined total per year for all applications 8 quarts per acre
Total of all Preplant, At-Planting, Preemergence applications 5 quarts per acre
Total of allin-crop applications from cracking to 60 percent open bolls 6 quarts per acre
Master Label 524-454 Page 58 of 139 Submitted August 26, 2009

) )
I. MAIN LABEL FOR FOOD CROP USES
Total of all In-crop applications between layby and 60 percent open 2 quarts per acre bolls
Total of all In-crop applications from 60 percent open bolls to 7 days 2 quarts per acre prior to harvest
Total of all In-crop applications from emergence through harvest 6 quarts per acre
PRECAUTIONS, RESTRICTIONS: See the "ROUNDUP READY CROPS" section of this label for
precautionary instructions regarding the use of this product in Roundup Ready crops. See the
"PRODUCT INFORMATION" section of this label for more information on Maximum Application Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting Roundup Ready Flex
cotton.
TANK MIXTURES: This product may be tank-mixed with 2,4-D or Clarity and applied prior to planting
only This product may be tank-mixed with the following products and applied prior to crop emergence.
Ensure that the specific product being used is labeled for application prior to planting or the emergence of
cotton. Read and follow label directions of all products in the tank mixture.
[Insert active ingredient(s) or brand name of product(s) containing the fol/owing active ingredients
that, at the time of printing, are registered for use prior to the emergence of cotton:
clomazone, diu ron, flumioxazin, fluometuron, fomesafen, metolachlor, s-metolachlor,
pendimethalin, prometyrn, pyrithiobac-sodium
Caparol, Command, Cotoran, Cotton-Pro, Direx, Dual MAGNUM, Dual " MAGNUM, Karmex,
Meturon, PARRLAY, Prowl, Prowl H20, Reflex, Stalwart, Staple, Valor, Zorial]
PRECAUTIONS, RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant,
at-planting and preemergence applications combined is 5 quarts per acre per season. Refer to individual
tank-mix product label for restrictions and precautions; use according to the most restrictive precautionary
statements for each product in the tank mixture.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied to control annual grasses and broad leaf weeds listed
on this label in Roundup Ready Flex cotton. To maximize yield potential, eliminate competing weeds
early. Many perennial weeds will be controlled or suppressed with one or more applications of this
product. Use an initial application of 1 quart per acre to control or suppress 1 to 3 inch tall annual
grasses and broadleaf weeds. This product may be applied postemergence to Roundup Ready Flex
cotton using ground application equipment at rates up to 1.5 quarts per acre per application. In addition to
broadcast application, post-directed spray equipment may be used to achieve more thorough weed
coverage.
TANK MIXTURES: This product may be tank-mixed with the following products and applied
postemergence (in-crop) over the top of Roundup Ready Flex cotton. Ensure that the specific product
being used is labeled for application postemergence (in-crop) to cotton. Read and follow label directions
of all products in the tank mixture.
[Insert active ingredient(s) or brand name of product(s) containing the fol/owing active ingredients
that, at the time of printing, are registered for use postemergence (in-crop) to cotton:
clethodim, fluazifop-P-butyl, fomesafen, metolachlor, s-metolachlor, pyrithiobac-sodium,
quizalofop-p-ethyl, sethoxydim, trifloxysulfuron-sodium
Master Label 524-454 Page 59 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
Assure II, Dual MAGNUM, Envoke, Fusilade, Poast Plus, Reflex, Select, Select MAX, Stalwart,
Staple]
[Optional text: Staple may cause leaf yellowing and/or leaf crinkling when applied postemergence
(in-crop) in Roundup Ready Flex cotton. Dual Magnum and Stalwart applied over the top of
Roundup Ready Flex cotton may cause leaf injury in the form of necrotic spotting.]
This product can be tank-mixed with the following products for in-crop application using precision post
directed or hooded sprayers. Ensure that the specific product being used is labeled for application
postemergence (in-crop) to cotton. Read and follow label directions of all products in the tank mixture.
[Insert active ingredient(s) or brand name of product(s) containing the fol/owing active ingredients
that, at the time of printing, are registered for use postemergence (in-crop) to cotton:
carfentrazone-ethyl, diuron, flumioxazin, fluometuron, linuron, pendimethalin, prometyrn,
pyrithiobac-sodium, trifloxysulfuron-sodium
Aim, Caparol, Cotoran, Direx, Envoke, Layby-Pro, PARRLAY, Prowl H20, Staple, Valor]
[Optional text: Staple may cause leaf yellowing and/or leaf crinkling when applied postemergence
(in-crop) in Roundup Ready Flex cotton.]
PRECAUTIONS, RESTRICTIONS: The maximum single, in-crop application rate of this product to
Roundup Ready Flex cotton using ground application equipment is 1.5 quarts per acre. In-crop
application rates above 1 quart per acre made alone or with the addition of other crop chemical
products containing surfactant may cause a crop response including leaf speckling or leaf
necrosis. Do not exceed a maximum rate of 1 quart of this product per acre when making application by
air. Between layby and 60 percent open bolls, the maximum combined total application rate of this
product is 2 quarts per acre. The maximum combined total of all applications of this product made from
crop emergence to 60 percent open bolls must not exceed 6 quarts per acre. DO NOT ADD
ADDITONAL SURFACTANT OR ADDITIVES CONTAINING SURFACTANT TO THIS PRODUCT FOR
OVER-THE-TOP APPLICATION TO ROUNDUP READY FLEX COTTON. Refer to individual tank-mix
product label for restrictions and precautions; use according to the most restrictive precautionary
statements for each product in the tank mixture.
Preharvest
USE INSTRUCTIONS: This product may be applied to Roundup Ready Flex cotton up to 2 quarts per
acre for annual and perennial weed control prior to harvest after 60 percent boll crack.
NOTE: This product will not enhance the performance of harvest aids when applied to Roundup Ready
Flex cotton.
PRECAUTIONS, RESTRICTIONS: Allow a minimum of 7 days between application and harvest of
Roundup Ready Flex cotton. DO NOT ADD ADDITIONAL SURFACTANT OR ADDITIVES CONTAINING
SURFACTANT TO THIS PRODUCT FOR PREHARVEST APPLICATION TO ROUNDUP READY FLEX
COTTON.
ATTENTION: USE OF THIS PRODUCT IN ACCORDANCE WITH LABEL DIRECTIONS IS EXPECTED
TO RESULT IN NORMAL GROWTH OF ROUNDUP READY FLEX COTTON. HOWEVER, DUE TO THE
SENSITIVITY OF COTTON FRUITING TO VARIOUS ENVIRONMENTAL CONDITIONS, AGRONOMIC
PRACTICES AND OTHER FACTORS, IT IS IMPOSSIBLE TO ELIMINATE ALL RISKS ASSOCIATED
WITH THIS PRODUCT, EVEN WHEN APPLICATIONS ARE MADE IN CONFORMANCE WITH THE
LABEL SPECIFICATIONS. IN SOME CASES, THESE FACTORS CAN RESULT IN BOLL LOSS,
DELAYED MATURITY AND/OR YIELD LOSS.
Master Label 524-454 Page 60 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
12.7 Roundup Ready Soybean
TYPES OF APPLICATION: Preplant, At-Planting, Preemergence, Postemergence (In-crop), Preharvest,
Post-Harvest
USE INSTRUCTIONS: Refer to the following table for maximum application rates of this product with
Roundup Ready soybean.
Maximum Application Rates
Combined total per year for all applications 8 quarts per acre
Total of all Preplant, At-Planting, Preemergence 5 quarts per acre applications
Total of all in-crop applications from cracking through 3 quarts per acre flowering (R2 stage soybean)
Maximum preharvest application rate 1 quart per acre
PRECAUTIONS/RESTRICTIONS: See the "ROUNDUP READY CROPS" section of this label for
precautionary instructions regarding the use of this product in Roundup Ready crops. The maximum
combined total quantity of this product for all applications in a season is 8 quarts per acre. See the
"PRODUCT INFORMATION" section of this label for more information on Maximum Application Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting Roundup Ready
soybean.
TANK MIXTURES: This product may be tank-mixed with 2,4-D, Banvel or Clarity and applied prior to
planting only This product may be tank-mixed with the following products and applied prior to crop
emergence. Ensure that the specific product being used is labeled for application prior to planting or the
emergence of soybean. Read and follow label directions of all products in the tank mixture.
[Insert active ingredient(s) or brand name of product(s) containing the following active ingredients
that, at the time of printing, are registered for use preplant, at-planting and/or pre emergence to
soybean:
alachlor, atrazine, carfentrazone-ethyl, chlorimuron ethyl, clethodim, clomazone, cloransulam
methyl, dimethenamid-p, fenoxaprop, fluazifop-p-butyl, flufenacet, flumetsulam, flumiclorac pentyl
ester, flumioxazin, fomesafen, imazaquin, imazethapyr, lactofen, linuron, metolachlor, s
metolachlor, metribuzin, pendimethalin, sLilfentrazone, tribenuron methyl, trifluralin, quizalofop P
ethyl
Aim, Assure II, Axiom, Authority, Blanket, Boundary, Canopy, Canopy EX, Classic, Cobra,
Command, Command Xtra, Domain, Dual MAGNUM, Dual II MAGNUM, FirstRate, Flexstar,
Frontier, Fusion, Gangster, Gauntlet, INTRRO, Lexone, Linex, Linuron, Lorox, Lorox Plus, Me
Too-Lachlor, Micro-Tech, Outlook, Pendimax, Prowl, Prowl H20, Pursuit, Pursuit Plus, Python,
Reflex, Resource, Scepter, Select, Select MAX, Sencor, Spartan, Squadron, Steel, Treflan, Valor]
PRECAUTIONS, RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant,
at-planting and preemergence applications combined is 5 quarts per acre per season. Refer to individual
tank-mix product label for restrictions and precautions; use according to the most restrictive precautionary
statements for each product in the tank mixture.
Master Label 524-454 Page 61 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be used to control annual grasses and broad leaf weeds in
Roundup Ready soybean. This product can be applied from emergence (cracking) through flowering (R2
stage soybean). R2 stage soybean ends when a pod 5 millimeters (3/16 inch) long appears at one of the
four uppermost nodes on the main stem with a fully developed leaf (R3 stage). Refer to the "ANNUAL
WEEDS RATE SECTION" of this label for application rates for specific annual weeds. An initial
application rate of 1 quart per acre can be used to control or suppress most 2 to 8 inch tall weeds. Weeds
will be 2 to 8 inches tall approximately 2 to 5 weeks after planting. If the initial application is delayed and
weeds are larger, apply a higher rate of this product. This product may be used up to 2 quarts per acre in
any single, in-crop application for control of annual weeds and where dense weed populations exist.
A 1 to 2-quarts per acre rate (single or multiple applications) of this product will control or suppress
perennial weeds, including bermudagrass, Canada thistle, common milkweed, field bindweed, hemp
dogbane, horsenettle, marestail (horseweed), nutsedge, quackgrass, rhizome johnsongrass, redvine,
trumpetcreeper, swamp smartweed and wirestem muhly. For best results, allow perennial weed species
to achieve at least 6 inches of growth before spraying with this product.
Under adverse growing conditions, including drought, hail, wind damage or a poor soybean stand that
slows or delays canopy closure, a sequential application of this product may be necessary to control late
flushes of weeds. IN THE SOUTHERN STATES, A SEQUENTIAL APPLICATION OF THIS PRODUCT
WILL BE REQUIRED TO CONTROL NEW FLUSHES OF WEEDS IN THE ROUNDUP READY
SOYBEAN CROP. To control giant ragweed, apply 1 quart of this product per acre when the weed is 8 to
12 inches tall to increase control and possibly avoid the need for a sequential application.
TANK MIXTURES: This product may be tank-mixed with the following products and applied
postemergence (in-crop) over the top of Roundup Ready soybean. Ensure that the specific product being
used is labeled for application postemergence (in-crop) to soybean. Read and follow label directions of all
products in the tank mixture.
[Insert active ingredient(s) or brand name of product(s) containing the following active ingredients
that, at the time of printing, are registered for use postemergence (in-crop) to soybean:
acifluorfen, bentazon, chlorimuron ethyl, clethodim, cloransulam-methyl, fenoxaprop, fluazifop-p
butyl, flumiclorac pentyl ester, fomesafen, imazamox, imazethapyr, lactofen, pendimethalin,
quizalofop P-ethyl. sethoxydem, thifensulfuron-methyl
Arrow, Assure II, Basagran, Classic, Cobra, Extreme, FirstRate, Flexstar, Fusilade DX, Fusion,
Harmony GT XP, Poast, Poast Plus, Pursuit, Pursuit Plus, Raptor, Reflex, Select, Select MAX,
Synchrony STS, Targa, Ultra Blazer]
PRECAUTIONS, RESTRICTIONS: The combined total application of this product from crop emergence
through harvest must not exceed 3 quarts per acre. The maximum rate for any single in-crop application
is 2 quarts per acre. The maximum combined total of this product that can be applied during flowering
(R2 stage soybean) is 2 quarts per acre. Refer to individual tank-mix product label for restrictions and
precautions; use according to the most restrictive precautionary statements for each product in the tank
mixture. In some cases, these tank-mix products will cause visual soybean injury.
Preharvest
USE INSTRUCTIONS: This product may be applied to Roundup Ready soybean for weed control prior to
harvest. Apply up to 1 quart of this product per acre after pods have set and lost all green color.
PRECAUTIONS, RESTRICTIONS: Take care to avoid excessive seed shatter loss due to ground
application equipment. Allow a minimum of 14 days between final application and harvest of soybean
grain or feeding of soybean grain, forage or hay.
Master Label 524-454 Page 62 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
Post-Harvest
USE INSTRUCTIONS: This product may be applied for weed control after harvest of Roundup Ready
soybean. Higher rates may be required for control of large weeds that were growing in the crop at the
time of harvest. Tank mixtures with 2,4-D or dicamba may be used. Ensure that the specific product
being used is labeled for weed control application after harvest of soybean. Read and follow label
directions of all products in the tank mixture.
12.8 Roundup Ready 2 Yield Soybean
TYPES OF APPLICATION: Preplant, At-Planting, Preemergence, Postemergence (In-crop), Preharvest,
Post-Harvest
USE INSTRUCTIONS: Refer to the following table for maximum application rates of this product with
Roundup Ready 2 Yield soybean.
Maximum Application Rates
Combined total per year for all applications 8 quarts per acre
Total of all Preplant, At-Planting, Preemergence applications 5 quarts per acre
Total of all in-crop applications from cracking through flowering 3 quarts per acre (R2 stage soybean)
Maximum preharvest application rate 1 quart per acre
PRECAUTIONS/RESTRICTIONS: See the "ROUNDUP READY CROPS" section of this label for
precautionary instructions regarding the use of this product in Roundup Ready crops. The maximum
combined total quantity of this product for all applications in a season is 8 quarts per acre. See the
"PRODUCT INFORMATION" section of this label for more information on Maximum Application Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting Roundup Ready 2
Yield soybean.
TANK MIXTURES: This product may be tank-mixed with 2,4-D, Banvel or Clarity and applied prior to
planting only This product may be tank-mixed with the following products and applied prior to crop
emergence. Ensure that the specific product being used is labeled for application prior to planting or the
emergence of soybean. Read and follow label directions of all products in the tank mixture.
[Insert active ingredient(s) or brand name of product(s) containing the following active ingredients
that, at the time of printing, are registered for use preplant, at-planting and/or preemergence to
soybean:
alachlor, atrazine, carfentrazone-ethyl, chlorimuron ethyl, clethodim, clomazone, cloransulam
methyl, dimethenamid-p, fenoxaprop, fluazifop-p-butyl, flufenacet, flumetsulam, flumiclorac pentyl
ester, flumioxazin, fomesafen, imazaquin, imazethapyr, lactofen, linuron, metolachlor, s
metolachlor, metribuzin, pendimethalin, sulfentrazone, tribenuron methyl, trifluralin, quizalofop P
ethyl
Aim, Assure II, Axiom, Authority, Blanket, Boundary, Canopy, Canopy EX, Classic, Cobra,
Command, Command Xtra, Domain, Dual MAGNUM, Dual II MAGNUM, FirstRate, Flexstar,
Frontier, Fusion, Gangster, Gauntlet, INTRRO, Lexone, Linex, Linuron, Lorox, Lorox Plus, Me
Too-Lachlor, Micro-Tech, Outlook, Pendimax, Prowl, Prowl H20, Pursuit, Pursuit Plus, Python,
Reflex, Resource, Scepter, Select, Select MAX, Sencor, Spartan, Squadron, Steel, Treflan, Valor]
Master Label 524-454 Page 63 of 139 Submitted August 26, 2009

')
,/
I. MAIN LABEL FOR FOOD CROP USES
PRECAUTIONS, RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant,
at-planting and preemergence applications combined is 5 quarts per acre per season. Refer to individual
tank-mix product label for restrictions and precautions; use according to the most restrictive precautionary
statements for each product in the tank mixture.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be used to control annual grasses and broad leaf weeds in
Roundup Ready 2 Yield soybean. This product can be applied from emergence (cracking) through
flowering (R2 stage soybean), R2 stage soybean ends when a pod 5 millimeters (3/16 inch) long appears
at one of the four uppermost nodes on the main stem with a fully developed leaf (R3 stage). Refer to the
"ANNUAL WEEDS RATE SECTION" of this label for application rates for specific annual weeds. An
initial application rate of 1 quart per acre can be used to control or suppress most 2 to 8 inch tall weeds.
Weeds will be 2 to 8 inches tall approximately 2 to 5 weeks after planting. If the initial application is
delayed and weeds are larger, apply a higher rate of this product. This product may be used up to 2
quarts per acre in any single, in-crop application for control of annual weeds and where dense weed
populations exist.
A 1 to 2-quarts per acre rate (single or multiple applications) of this product will control or suppress
perennial weeds, including bermudagrass, Canada thistle, common milkweed, field bindweed, hemp
dogbane, horsenettle, marestail (horseweed), nutsedge, quackgrass, rhizome johnsongrass, redvine,
trumpetcreeper, swamp smartweed and wirestem mUhly. For best results, allow perennial weed species
to achieve at least 6 inches of growth before spraying with this product.
Under adverse growing conditions, including drought, hail, wind damage or a poor soybean stand, that
slows or delays canopy closure, a sequential application of this may be necessary to control late flushes
of weeds. IN THE SOUTHERN STATES, A SEQUENTIAL APPLICATION OF THIS PRODUCT WILL BE
REQUIRED TO CONTROL NEW FLUSHES OF WEEDS IN THE ROUNDUP READY 2 YIELD
SOYBEAN CROP. To control giant ragweed, apply 1 quart of this product per acre when the weed is 8 to
12 inches tall to increase control and possibly avoid the need for a sequential application.
TANK MIXTURES: This product may be tank-mixed with the following products and applied
postemergence (in-crop) over the top of Roundup Ready 2 Yield soybean. Ensure that the specific
product being used is labeled for application postemergence (in-crop) to soybean. Read and follow label
directions of all products in the tank mixture.
[Insert active ingredient(s) or brand name of product(s) containing the following active ingredients
that, at the time of printing, are registered for use postemergence (in-crop) to soybean:
acifluorien, bentazon, chlorimuron ethyl, clethodim, cloransulam-methyl, fenoxaprop, fluazifop-p
butyl, flumiclorac pentyl ester, fomesafen, imazamox, imazethapyr, lactofen, pendimethalin,
quizalofop P-ethyl. sethoxydem, thifensulfuron-methyl
Arrow, Assure II, Basagran, Classic, Cobra, Extreme, FirstRate, Flexstar, Fusilade DX, Fusion,
Harmony GT XP, Poast, Poast Plus, Pursuit, Pursuit Plus, Raptor, Reflex, Select, Select MAX,
Synchrony STS, Targa, Ultra Blazer]
PRECAUTIONS, RESTRICTIONS: The combined total application of this product from crop emergence
through harvest must not exceed 3 quarts per acre. The maximum rate for any single, in-crop application
is 2 quarts per acre. The maximum combined total of this product that can be applied during flowering
(R2 stage soybean) is 2 quarts per acre. Refer to individual tank-mix product label for restrictions and
precautions; use according to the most restrictive precautionary statements for each product in the tank
mixture, In some cases, these tank-mix products will cause visual soybean injury.
Master Label 524-454 Page 64 of 139 Submitted August 26, 2009

".
J )
I. MAIN LABEL FOR FOOD CROP USES
Preharvest
USE INSTRUCTIONS: This product may be applied to Roundup Ready 2 Yield soybean for weed control
prior to harvest. Apply up to 1 quart of this product per acre after pods have set and lost all green color.
PRECAUTIONS, RESTRICTIONS: Take care to avoid excessive seed shatter loss due to ground
application equipment. Allow a minimum of 14 days between final application and harvest of soybean
grain or feeding of soybean grain, forage or hay.
Post-Harvest
USE INSTRUCTIONS: This product may be applied for weed control after harvest of Roundup Ready 2
Yield soybean. Higher rates may be required for control of large weeds that were growing in the crop at
the time of harvest. Tank mixtures with 2,4-0 or dicamba may be used. Ensure that the specific product
being used is labeled for weed control application after harvest of soybean. Read and follow label
directions of all products in the tank mixture.
12.9 Roundup Ready Sugar Beet
TYPES OF APPLICATION: Preplant, At-Planting, Preemergence, Postemergence (In-crop)
USE INSTRUCTIONS: Refer to the following table for maximum application rates of this product with
Roundup Ready sugar beet.
Maximum Application Rates
Combined total per year for all applications 8 quarts per acre
Total of all Preplant, At-Planting, Preemergence 5 quarts per acre applications
Total of all applications made from emergence through 2.5 quarts per acre the 8-leaf stage
Total of all applications made after the 8-leaf stage and 2 quarts per acre up to canopy closure
PRECAUTIONS, RESTRICTIONS: See the "ROUNDUP READY CROPS" section of this label for
precautionary instructions regarding the use of this product in Roundup Ready crops. The maximum
combined total quantity of this product for all applications in a season is 8 quarts per acre. See the
"PRODUCT INFORMATION" section of this label for more information on "Maximum Application Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting Roundup Ready
sugar beet.
TANK MIXTURES: This product may be tank-mixed with the following products and applied prior to crop
emergence. Ensure that the specific product being used is labeled for application prior to emergence of
sugar beet. Read and follow label directions of all products in the tank mixture.
[Insert active ingredient(s) or brand name of product(s) containing the following active ingredients
that, at the time of printing, are registered for use preplant, at-planting and/or pre emergence to
sugar beet:
ethofumesate
Norton SC]
Master Label 524-454 Page 65 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD C~OP USES
Postemergence (In-Crop)
USE INSTRUCTIONS: This product may be applied over the top of Roundup Ready sugar beet for
control of annual grasses and broad leaf weeds from emergence to 30 days prior to harvest. To maximize
yield potential eliminate competing weeds early. Up to 4 sequential applications of this product may be
made with at least 10 days between applications. This product will control or suppress most perennial
weeds. For some perennial weeds, repeat applications may be required to eliminate crop competition
throughout the growing season. Refer to the "ANNUAL WEEDS RATE SECTION" and "PERENNIAL
WEEDS RATE SECTION" of this label for application rates for specific weeds.
TANK MIXTURES: This product may be tank-mixed with the following products and applied
postemergence (in-crop) over the top of Roundup Ready sugar beet. Ensure that the specific product
being used is labeled for application postemergence (in-crop) to sugar beet. Read and follow label
directions of all products in the tank mixture
[Insert active ingredient(s) or brand name of product(s) containing the following active ingredients
that, at the time of printing, are registered for use postemergence (in-crop) to sugar beet:
clethodim, clopyralid, desmedipham, dimethenamid, ethofumesate, s-metolachlor,
phenmedipham, quizalofop-p-ethyl, trisulfuron-methyl
Assure II, Betamix, Betanex, Dual MAGNUM, Norton SC, Outlook, Progress, Select, Stinger,
Upbeet]
[Optional statement: Betamix, Betanex, Norton SC and Progress can cause significant sugar beet
injury. Refer to these product labels for crop injury precautions.]
PRECAUTIONS, RESTRICTIONS: The combined total application of this product from crop emergence
through harvest must not exceed 4.5 quarts per acre. The maximum rate for any single application from
crop emergence until the 8-leaf stage is 1.5 quarts per acre. The maximum rate for any single application
between the 8-leaf stage and canopy closure is 1 quart per acre. Allow a minimum of 30 days between
last application and sugar beet harvest. Tank mixtures of this product with herbicides, insecticides of
fungicides may result in crop injury or reduced weed control. Refer to individual tank mixture product
label for restrictions and precautions; use according to the most restrictive precautionary statements for
each product in the tank mixture.
13.0 NON-CROP USES AROUND THE FARMSTEAD
TYPES OF USES: Farmstead Weed Control, Trim-and-Edge, Greenhouse/Shadehouse, Chemical
Mowing, Cut Stump, Habitat Management
USE INSTRUCTIONS: Refer to the "ANNUAL WEEDS RATE SECTION" and "PERENNIAL WEEDS
RATE SECTION" of this label for application rates for specific weeds. When applied as directed, this
product will control those annual and perennial grasses and broadleaf weeds. Application rates of this
product specified in the following sections, or on separate supplemental labeling or Fact Sheets published
for this product, on how to control tough weeds, supersede rates in the "ANNUAL WEEDS RATE
SECTION" and "PERENNIAL WEEDS RATE SECTION" of this label.
13.1 Farmstead Weed Control, Trim-And-Edge
USE INSTRUCTIONS: This product may be used to control annual weeds, perennial weeds and woody
brush found in any part of the farmstead, including around building foundations and equipment storage
areas, along and in fences, in dry ditches and canals, along ditchbanks, driveways, farm roads,
farmyards, fencerows, parking areas, rangeland, rights-of-way, shelterbelts, storage areas and prior to
planting landscape ornamentals.
Master Label 524-454 Page 66 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
TANK MIXTURES: This product may be tank-mixed with the following products, provided that the
specific product used is labeled for use on these non-crop sites. Refer to the individual product labels for
approved farmstead sites and application rates. Read and follow label directions of all products in the
tank mixture.
[Insert active ingredient(s) or brand name of product(s) containing the following active ingredients
that, at the time of printing, are registered for use on these non-crop sites:
2,4-0, bromacil, chlorosulfuron, dicamba, diuron, imazapic, imazapyr, metsulfuron-methyl,
oryzalin, oxadiazon, pendimethalin, prodiamine, simazine, sulfometuron-methyl
Aresnal, Banvel, Barricade 65WG, Clarity, Oiuron, Endurance, Escort XP, Karmex OF, Krovar I
OF, Oust, Pendulum 3.3 EC, Pendulum WOG, Plateau, Princep OF, Princep 4L, Ronstar, Sahara
OG, Simazine, Surflan AS Specialty, Telar OF, Vanquish]
For annual weeds, use 1 quart of this product per acre when weeds are less than 6 inches tall, 1.5 quarts
per acre when weeds are 6 to 12 inches tall and 2 quarts per acre when weeds are greater than 12
inches tall. For perennial weeds, apply 2 to 5 quarts per acre in these tank mixes. For application of these
tank mixtures using backpack sprayers, handguns or other hand-held applicators, see the "ANNUAL
WEE~S-HAND-HELD OR BACKPACK EQUIPMENT" section of this label for the required concentration
of this product in the mix.
PRECAUTIONS, RESTRICTIONS: Refer to individual tank-mix product label for restrictions and
precautions; use according to the most restrictive precautionary statements for each product in the tank
mixture.
13.2 Greenhouse/Shadehouse
USE INSTRUCTIONS: This product may be used to control weeds in and around greenhouses and
shadehouses.
PRECAUTIONS, RESTRICTIONS: Desirable vegetation must not be present during application and air
circulation fans must be turned off until after the application has dried. Do not use in residential
greenhouses.
13.3 Chemical Mowing
USE INSTRUCTIONS: This product will suppress perennial grasses listed in this section to serve as a
substitute for mowing. Apply 6 fluid ounces of this product per acre when treating Kentucky bluegrass.
Apply 8 fluid ounces of this product per acre when treating tall fescue, fine fescue, orchardgrass,
bahiagrass or quackgrass covers. Apply 16 fluid ounces of this product per acre when treating
bermudagrass. Apply 64 fluid ounces of this product per acre when treating torpedograss or paragrass.
Make all applications in 10 to 20 gallons of spray solution per acre. Chemical mowing application may be
made along farm ditches and other parts of farmsteads.
PRECAUTIONS, RESTRICTIONS: Use only in areas where some temporary injury or discoloration of
perennial grasses can be tolerated.
13.4 Cut Stump
TYPES OF USES: Treating cut stumps in any non-crop site listed on this label
USE INSTRUCTIONS: This product will control re-growth of cut stumps and re-sprouts of many types of
woody brush and tree species, some of which are listed below. Apply this product using suitable
equipment to ensure coverage of the entire cambium. Cut trees or re-sprouts close to the soil surface.
Apply a 50 to 100 percent solution of this product to the freshly cut surface immediately after cutting.
Delays in application could result in reduced performance. For best results, apply during periods of active
growth and full leaf expansion.
Master Label 524-454 Page 67 of 139 Submitted August 26, 2009

I. MAIN LABEL FOR FOOD CROP USES
Alder Oak Reed, giant
Eucalyptus Pepper, Brazilian Saltcedar
Madrone Pine, Austrian Sweetgum
Tan oak
Willow
PRECAUTIONS, RESTRICTIONS: Do not make a cut stump applications when the roots of desirable
woody brush or trees may be grafted to the roots of the cut stump. Some sprouts, stems, or trees may
share the same root system. Adjacent trees having a similar age, height and spacing may signal shared
roots. Whether grafted or shared, injury is likely to occur to non-treated stems/trees when one or more
trees sharing common roots are treated.
13.5 Habitat Management
TYPES OF USES: Habitat Restoration and Maintenance, Wildlife Food Plots
Habitat Restoration and Maintenance
USE INSTRUCTIONS: This product may be used to control exotic and other undesirable vegetation in
habitat management areas. Application can be made to allow recovery of native plant species, prior to
planting desirable native species, and for similar broad-spectrum vegetation control requirements in
habitat management areas. Spot treatment can be used to selectively remove unwanted plants for habitat
maintenance and enhancement.
Wildlife Food Plots
USE INSTRUCTIONS: This product may be used as a site preparation treatment to control annual and
perennial weeds prior to planting wildlife food plots. Any wildlife food species may be planted after
applying this product, or native species may be allowed to repopulate the area. If tillage is needed to
prepare a seedbed, wait 7 days after application before tillage.
PRECAUTIONS, RESTRICTIONS: There are no rotational restrictions for planting any wildlife food
species or for allowing native species to repopulate the area following applications of this product.
14.0 ANNUAL WEEDS RATE SECTION
When water carrier volumes are between 16 and 40 gallons per acre for ground application and between
6 and 15 gallons per acre for aerial application, the following use rates will control the annual weeds listed
in the "ANNUAL WEEDS RATE TABLE" that follows.
• 1 quart per acre - grass and broad leaf annual weeds less than 6 inches in height or
circumference and vines less than 3 inches in length.
• 3 pints per acre - grass and broad leaf annual weeds 6 to 12 inches in height or circumference
and vines 3 to 6 inches in length.
• 2 quarts per acre - grass and broad leaf annual weeds greater than 12 inches in height or
circumference and vines greater than 6 inches in length.
WHEN WATER CARRIER VOLUMES ARE BETWEEN 3 AND 15 GALLONS PER ACRE FOR
GROUND APPLICATION AND BETWEEN 3 AND 5 GALLONS PER ACRE FOR AERIAL
APPLICATION, USE THE RATES SPECIFIED FOR INDIVIDUAL WEEDS AS FOLLOW IN THE
"ANNUAL WEEDS RATE TABLE".
Apply to actively growing annual weeds. Annual weeds are generally easiest to control when they are
small.
Older, mature (hardened) annual weed species may require higher rates than specified in this table even
if they meet the size requirements. This product may be used up to 64 fluid ounces per acre for tough-to
control annual weeds and where heavy weed densities exist. Follow all precautions and restrictions,
Master Label 524-454 Page 68 of 139 Submitted August 26, 2009

'j
.'
I. MAIN LABEL FOR FOOD CROP USES
including the maximum application rates and crop stage timings specified in the instructions for the crops,
including Roundup Ready crops, and use sites listed on this label.
Maximum size refers to the maximum plant height, length of runners for vines, or circumference of rosette
plants in inches.
Do not tank-mix with soil residual herbicides when using these rates unless otherwise specified.
For weeds that have been mowed, grazed or cut, allow re-growth to occur prior to treatment with this
product.
ANNUAL WEEDS RATE TABLE
RATE
(fluid ounces per acre)
16 24 32 40 48
WEED SPECIES Maximum height/length (in inches)
Ammannia, purple 3 6 12 18
Anoda, spurred 2 3 5 8
Barley 18 18 +
Barnyardgrass 3 6 7 9
Bassia, fivehook 6
Beggarweed, Florida 5 8
Bittercress 12 20
Bluegrass, annual 10
Bluegrass, bulbous 6
Brome, downy 1,2 6 12
Brome, Japanese 6 12 24
Browntop panicum 6 8 12 24
Buckwheat, wild 3 1 2
Burcucumber 6 12 18
Buttercup 12 20
Carolina geranium 4 9
Carpetweed 6 12
Cheat 2 6 20
Chervil 20
Chickweed 12 18
Cocklebur 12 18 24 36
Copperleaf, hophornbeam 2 4 6
Copperleaf, Virginia 2 4 6
Coreopsis, plains 6 12 18
Corn, volunteer 6 12 20
Corn speedwell 12
Crabgrass 3 6 12
Crowfootgrass 6 12
Cutleaf evening primrose 3 6
Devilsclaw (unicorn plant) 3 6
Master Label 524-454 Page 69 of 139 Submitted August 26, 2009

\ )
\\ of \~D
l
I. MAIN LABEL FOR FOOD CROP USES
Dwarfdandelion 12
Eastern mannagrass 8 12
Eclipta 4 8 12
Fall panicum 4 6 12
Falsedandelion 20
Falseflax, smallseed 12
Fiddleneck 6 12
Field pennycress 6 12
Filaree 6 12
Fleabane, annual 6 20
Fleabane, hairy (Conyza bonariensis) 6 10
Fleabane, rough 3 6 12
Florida pusley 4 6
Foxtail, giant, bristly, yellow 6 12 20
Foxtail, Carolina 10
Foxtail, green 12
Goatgrass, jointed 6 12
Goosegrass 3 6 12
Grain sorghum (milo) 6 12 20
Groundcherry 3 6 9
Groundsel, common 6 10
Hemp sesbania 2 4 6 8
Henbit 6 12
Horseweedl Marestail * 6 12 18 (Conyza canadensis)
Itchgrass 6 8 12 18
Jimsonweed 12 18
Johnsongrass, seedling 6 12 18 24
Junglerice 3 6 7 9
Knotweed 6 12
Kochia4 3 to 6 12
Lambsquarters 6 12 20
Little barley 6 12
London rocket 6 24
Mayweed 2 6 12 18
Morningglory, annual (Ipomoea spp) 3 6
Mustard, blue 6 12 18
Mustard, tansy 6 12 18
Mustard, tumble 6 12 18
Mustard, wild 6 12 18
Nightshade, black 4 6 12
Nightshade, hairy 4 6 12
Oats 3 6 18
Master Label 524-454 Page 70 of 139 Submitted August 26, 2009

) 1"o~ \'-\0
I. MAIN LABEL FOR FOOD CROP USES
Pigweed, Palmer * 12 18 24
Pigweed species * 12 18 24
Prickly lettuce 6 12
Purslane 3 6
Ragweed, common * 6 12 18
Ragweed, giant * 6 12 18
Red rice 4
Rye, volunteer/cereal 2 6 18 18 +
Ryegrass species * 6 12
Sand bur, field 6 12
Sand bur, longspine 6 12
Shattercane 6 12 20
Shepherd's-purse 6 12
Sicklepod 2 4 8
Signalgrass, broad leaf 3 6 7 9
Smartweed, ladysthumb 6 9
Smartweed, Pennsylvania 6 9
Sowthistle, annual 6 12
Spanishneedles 6 12
Speedwell, purslane 12
Sprangletop 6 12 20
Spurge, prostrate 6 12
Spurge, spotted 6 12
Spurry, umbrella 6
Stinkgrass 12
Sunflower 12 18
Swinecress 5 12
T eaweed/ Prickly sida 2 4 6
Texas panicum 6 8 12 24
Thistle, Russian5 6 12
Velvetleaf 6 12
Virginia pepperweed 18
Waterhemp * 6 12
Wheat 2 6 12 18
Wheat, (overwintered) 6 12 18
Wild oats 3 6 18
Wild proso millet 6 12 18
Witchgrass 12
Woolly cupgrass 6 12
Yellow rocket 12 20
1 For control of downy brome in no-till systems, use 24 fluid ounces per acre.
2 Performance is better if application is made before this weed reaches the boot stage of growth.
Master Label 524-454 Page 71 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
3 Apply 24 fluid ounces of this product per acre to control wild buckwheat in the cotyledon to 2-leaf stage.
Apply 32 fluid ounces per acre to control 2- to 4-leaf wild buckwheat. For better control of wild
buckwheat over 2 inches in size, use sequential treatments of 32 fluid ounces followed by 32 fluid
ounces of this product per acre.
4 Do not treat kochia in the button stage.
S Control of Russian thistle may vary based on environmental conditions and spray coverage. If possible,
use a tank mixture with 2,4-0 as described below to improve control.
A glyphosate-resistant biotype has been confirmed. For additional information, refer to the "WEED
RESISTANCE MANAGEMENT" section of this label. You may also visit on the Internet
www.weedscience.org or www.weedresistancemanagement.com, or contact your [INSERT COMPANY
NAME] representative.
14.1 Annual Weeds-Tank Mixtures with 2,4-0 or Oicamba or Tordon 22K
Better control of certain tough weeds can be achieved by tank-mixing this product with 0.25 pound of
dicamba, 0.5 pound of 2,4-0 or 1 to 2 fluid ounces of Tordon 22K per acre. These other herbicides,
combined with the rates of this product specified in the "ANNUAL WEEDS RATE TABLE" above, will
control the following weeds up to the maximum height or length indicated: 6 inches - prickly lettuce,
marestail/horseweed, morning glory, kochia (dicamba only) wild buckwheat (Tordon 22K only); 12inches
- cocklebur, lambsquarters, pigweed, Russian thistle (2,4-0 only).
At rates given in the "ANNUAL WEEDS RATE SECTION", this product will control the following weeds up
to a maximum height or length of 6 inches: common ragweed, giant ragweed, Pennsylvania smartweed,
and velvetleaf. For better control, tank-mix this product with 0.5 pound of 2,4-0 per acre.
Ensure that the specific product being used is labeled for application at the desired site. Follow all
precautions and limitations on the tank-mix product label, including application timing restrictions, soil
restrictions, minimum re-cropping interval and rotational guidelines. Use according to the more restrictive
label requirements. Some crop injury may occur if dicamba or Tordon 22K is applied within 45 days of
planting.
14.2 Annual Weeds-Hand-Held or Backpack Equipment
For control of weeds listed in the "ANNUAL WEEDS RATE TABLE" above, apply a O.5-percent solution of
this product to weeds less than 6 inches in height or runner length. Apply prior to seed head formation in
grass or bud formation in broad leaf weeds. For annual weeds over 6 inches tall, or unless otherwise
specified, use a 1-percent solution.
For best results, use a 2-percent solution on harder-to-control perennials, such as bermudagrass, dock,
field bindweed, hemp dogbane, milkweed and Canada thistle.
When using application methods that result in less than complete coverage, use a 5-percent solution for
annual and perennial weeds, and a 5 to 1 O-percent solution for woody brush and trees.
14.3 Annual Weeds-Tank Mixtures with Atrazine for Fallow and Reduced Tillage Systems
For use only in Colorado, Kansas, Nebraska, Oklahoma, Oregon, South Dakota, and Washington. In
Oregon and Washington, do not exceed 1 pound of atrazine per acre.
Application of 24 to 28 fluid ounces of this product plus 1 to 2 pounds of atrazine per acre will control the
following weeds: barnyardgrass (requires 28 fluid ounces for control), downy brome, green foxtail,
lambsquarters, prickly lettuce, tansy mustard, pigweed, field sand bur, stinkgrass, Russian thistle,
volunteer wheat, witchgrass and kochia (add 0.12 pound of dicamba for control).
Master Label 524-454 Page 72 of 139 Submitted August 26, 2009

~)
140t\~O
I. MAIN LABEL FOR FOOD CROP USES
Ensure that the specific atrazine or dicamba product being used is labeled for application at the desired
site. Follow all precautions and limitations on the tank mix product's label, including application timing
restrictions, soil restrictions, minimum re-cropping interval and rotational guidelines.
15.0 PERENNIAL WEEDS RATE SECTION
Apply to actively growing perennial weeds.
NOTE: If weeds have been mowed or tilled, do not treat until plants have resumed active growth and
have reached the specified stage.
Repeat treatments may be necessary to control weeds regenerating from underground parts or
seed. Repeat treatments must be made prior to crop emergence.
Unless otherwise stated, allow 7 or more days after application before tillage.
Best results are obtained when soil moisture is adequate for active weed growth.
Weed Species
PERENNIAL WEEDS RATE TABLE
Rate
(QT/A)
Water Volume
(GPA)
Hand-Held
% Solution
Alfalfa 1 - 2 3 - 10 2%
Apply after the last hay cutting in the fall. Allow alfalfa to re-grow to a height of 6 to 8 inches or more
prior to treatment. Follow application with deep tillage at least 7 days after treatment, but before soil
freeze-up.
Alligatorweed 4 3 - 20 1.5%
For partial control, apply when most of the plants are in bloom. Repeat applications will be required to
achieve control.
Anise (fennel) 1 1 - 2%
Apply as a spray-to-wet treatment.
Bahiagrass 2 3-5 3-20 2%
Bentgrass 3 - 5 10 - 20 2%
For suppression in grass seed production areas. For ground application only. Ensure entire crown
area has resumed growth prior to a fall application. Ensure that bentgrass has at least 3 inches of
growth before application. Avoid tillage prior to treatment. Tillage 7 to 10 days after application
provides best results.
Bermudagrass 3 - 5 3 - 20 2%
For control, apply 5 quarts of this product per acre. For partial control, apply 3 quarts per acre. Apply
when bermudagrass is actively growing and seed heads are present. Retreatment may be necessary to
achieve control.
Bermudagrass, water
(knotgrass)
1 -1.5 5-10 2%
Apply 3 pints of this product in 5 to 10 gallons of water per acre when water bermudagrass is 12 to 18
inches in length. Allow 7 or more days before tilling, flushing or flooding the field.
For fall application, apply 1 quart this product in 5 to 10 gallons of water per acre. Till fallow fields prior
to application. Apply prior to frost on water bermudagrass that is 12 to 18 inches in length.
This product is not registered in California for use on water bermudagrass.
Bindweed, field 0.5 - 5 3 - 20 2%
Master Label 524-454 Page 73 of 139 Submitted August 26, 2009

) )
I. MAIN LABEL FOR FOOD CROP USES
Do not treat when weeds are under drought stress as good soil moisture is necessary for active
growth.
For control, apply 4 to 5 quarts of this product per acre west of the Mississippi River and 3 to 4 quarts
per acre east of the Mississippi River when bindweed is at or beyond full bloom. For best results, apply
in late summer or fall. Fall treatment must be applied before a killing frost.
Also for control, apply 2 quarts of this product plus 0.5 pound of dicamba in 10 to 20 gallons of water
per acre. Do not apply by air.
For suppression on irrigated agricultural land, apply 1 to 2 quarts of this product plus 1 pound of 2,4-0
in 10 to 20 gallons of water per acre with ground application equipment only. Application can be made
following harvest or in fall fallow ground when bindweed is actively growing and the majority of runners
are 12 inches or more in length. Irrigate at least once to promote active bindweed growth.
For suppression, apply 1 pint of this product plus 0.5 pound of 2,4-0, in 3 to 10 gallons of water per
acre with ground application equipment, or in 3 to 5 gallons of water per acre for aerial application.
Apply by air in fallow and reduced tillage systems only. Delay application until maximum emergence
has occurred and when vines are between 6 to 18 inches in length.
In California only, apply 1 to 5 quarts of this product per acre. Actual rate needed for suppression or
control will vary within this range depending on local conditions. For suppression on irrigated land
where annual tillage is performed, apply 1 quart of this product in 3 to 10 gallons of water per acre
when bindweed has reached a length of 12 inches or greater. Allow maximum weed emergence and
runner growth before application. Allow 3 or more days after application before tillage.
Bluegrass, Kentucky 1 - 2 3 - 40 2%
Apply 2 quarts of this product in 10 to 40 gallons of water per acre when most plants have reached the
boot to early seedhead stage of development. For partial control in pasture or hay crop renovation,
apply 1 to 1.5 quarts of this product in 3 to 10 gallons of water per acre to actively growing plants when
most have reached 4 to 12 inches in height.
Blueweed, Texas 3 - 5 3 - 40 2%
Apply 4 to 5 quarts of this product per acre west of the Mississippi River and 3 to 4 quarts per acre
east of the Mississippi River when plants are at or beyond full bloom. New leaf development indicates
active growth. For best results, apply in late summer or fall. Fall treatment must be applied before a
killing frost.
Brackenfern 3 - 4 3 - 40 1 - 1.5%
Apply to fully expanded fronds that are at least 18 inches long.
Bromegrass, smooth 1 - 2 3 - 40 2%
Apply 2 quarts of this product in 10 to 40 gallons of water per acre when most plants have reached the
boot to early seed head stage of development. For partial control in pasture or hay crop renovation,
apply 1 to 1.5 quarts of this product in 3 to 10 gallons of water per acre to actively growing plants when
most have reached 4 to 12 inches in height.
Bursage, woolly-leaf 3 - 20 2%
For control, apply 2 quarts of this product plus 0.5 pound of dicamba per acre. For partial control, apply
1 quart of this product plus 0.5 pound of dicamba per acre. Apply when plants are producing new
active growth that has been initiated by moisture for at least 2 weeks, and when plants are at or
beyond flowering.
Canarygrass, reed2 2-3 3 -40 2%
3-5 3-40 2%
Clover; red or white 1 3-5 3 -20 2%
Master Label 524-454 Page 74 of 139 Submitted August 26, 2009

) 'llo ot\~O
I. MAIN LABEL FOR FOOD CROP USES
Also for control, apply 16 to 32 fluid ounces of this product plus 0.5 to 1 pound of 2,4-0, in 3 to 10
gallons of water per acre.
Cogongrass 3 - 5 10 - 40 2%
Apply when cogongrass is at least 18 inches tall in late summer or fall. Due to uneven stages of growth
and the dense nature of vegetation preventing good spray coverage, repeat treatments may be
necessary to achieve control.
Dallisgrass 2 3 - 5 3 - 20 2%
Dandelion 1 3 - 5 3 - 40 2%
Also for control, apply 1 pint of this product plus 0.5 pound of 2,4-0, in 3 to 10 gallons of water per
acre.
Dock, curly1 3 - 5 3 - 40 2%
Also for control, apply 1 to 2 pints of this product plus 0.5 to 1 pound of 2,4-0, in 3 to 10 gallons of
water per acre.
Dogbane, hemp 4 3 - 40 2%
Apply when most plants have reached the late bud to flower stage of growth. Following crop harvest or
mowing, allow weeds to re-grow to a mature stage prior to treatment. For best results, apply in late
summer or fall.
For suppression, apply 1 pint of this product plus 0.5 pound of 2,4-0, in 3 to 10 gallons of water per
acre for ground application, and 3 to 5 gallons of water per acre for aerial application. Delay application
until maximum emergence of dogbane has occurred.
Fescue (except tall) 1 3 - 5 3 - 20 2%
Fescue, tall 1 - 3 3 - 40 2%
Apply 3 quarts of this product per acre when most plants have reached boot to early seedhead stage
of development.
For fall application, apply 1 quart of this product in 3 to 10 gallons of water per acre when plants have
6 to 12 inches of new growth. A sequential application of 1 pint of this product per acre will improve
long-term control and control seedlings germinating after fall treatments or the following spring.
Guineagrass 2 - 3 3 - 40 1 %
Apply when most plants have reached at least the 7-leaf stage of growth. Ensure thorough coverage
when using hand-held equipment. In Texas and ridge of Florida, use 2 quarts of this product per acre
for control. In the flatwoods region of Florida, 3 quarts of this product per acre are required for control.
Horsenettle 1 3 - 5 3 - 20 2%
Horseradish 4 3 - 40 2%
Apply when most plants have reached the late bud to flower stage of growth. For best results, apply in
late summer or fall.
Iceplant1 1.5 - 2%
Thorough coverage is necessary for best control.
Jerusalem artichoke 1 3 - 5 3-20 2%
Johnsongrass 0.5 - 3 3 - 40 1 %
In annual cropping systems, apply 1 to 2 quarts of this product in 3 to 10 gallons of water per acre. Use
2 quarts of this product when applying 10 to 40 gallons of water per acre. In non-crop areas, or in
areas where annual tillage is not practiced (no-till), apply 2 to 3 quarts of this product in 10 to 40
gallons of water per acre.
For best results, apply when most plants have reached the boot to head stage of development or in the
Master Label 524-454 Page 75 of 139 Submitted August 26, 2009

11ot\4D
I. MAIN LABEL FOR FOOD CROP USES
fall prior to frost. Allow 7 or more days after application before tillage. Do not tank-mix with residual
herbicides when applying 1 quart of this product per acre.
For burndown of Johnsongrass, apply 1 pint of this product in 3 to 10 gallons of water per acre before
the plants reach a height of 12 inches. Allow at least 3 days after treatment before tillage.
For partial control or suppression, apply a 1-percent solution of this product as a spot treatment when
Johnsongrass is 12 to 18 inches in height. Ensure that coverage is uniform and complete.
Kikuyugrass 2 - 3 3 - 40 2%
Apply when most kikuyugrass is at least 8 inches in height (3- or 4-leaf stage of growth). Allow 3 or
more days after application before tillage.
Knapweed 4 3 - 40 2%
Apply when most plants have reached the late bud to flower stage of growth. For best results, apply in
late summer or fall.
Lantana 1 -1.25%
Apply at or beyond the bloom stage of growth.
Lespedeza
1
3 - 5 3-20 2%
Milkweed, common 3 3 - 40 2%
Apply when most plants have reached the late bud to flower stage of growth.
Muhly, wirestem 1 - 2 3 - 40 2%
Apply 1 quart of this product in 3 to 10 gallons of water per acre. Use 2 quarts of this product when
applying 10 to 40 gallons of water per acre or in pasture, sod, or non-crop areas. Apply when wirestem
muhly is 8 inches or more in height. Do not till between harvest and fall application, or in the fall or
spring prior to spring application. Allow 3 or more days after application before tillage.
Mullein, common 1 3 - 5 3 - 20 2%
Napiergrass 2 3 - 5 3 - 20 2%
Nightshade, silverleaf 2 3 - 10 2%
For best results, apply when at least 60 percent of the plants have berries. Fall treatment must be
made before a killing frost.
Nutsedge, purple or yellow 0.5 - 3 3 - 40 1 - 2%
Apply 3 quarts of this product per acre, or as a 1 to 2-percent solution, for control of nutsedge plants
and immature nutlets attached to treated plants. Treat when plants are in flower or when new nutlets
can be found at rhizome tips. Nutlets that have not germinated will not be controlled and may
germinate after treatment. Repeat treatments will be required for long-term control of ungerminated
tubers.
Sequential application of 1 to 2 quarts of this product in 3 to 10 gallons of water per acre after a
majority of the plants are in the 3- to 5-leaf stage (less than 6 inches tall) will also provide control.
Repeat this application as necessary when newly emerging plants reach the 3 to 5-leaf stage.
Subsequent applications will be necessary for long-term control.
For partial control of existing plants, apply 1 pint to 2 quarts of this product in 3 to 40 gallons of water
per acre when plants have 3 to 5 leaves and most are less than 6 inches tall. Repeat treatments will be
required to control subsequent emerging plants or re-growth of existing plants.
Orchardgrass 1 - 2 3 - 40 2%
Apply 2 quarts of this product in 10 to 40 gallons of water per acre when most plants have reached the
boot to early seedhead stage of development. For partial control in pasture or hay crop renovation,
apply 1 to 1.5 quarts of this product in 3 to 10 gallons of water per acre when plants are actively
Master Label 524-454 Page 76 of 139 Submitted August 26, 2009

) )
I. MAIN LABEL FOR FOOD CROP USES
growing and most have reached 4 to 12 inches in height.
For orchardgrass sods going to no-till corn, apply 1 to 1.5 quarts of this product in 3 to 10 gallons of
water per acre to orchardgrass that is a minimum of 12 inches tall for spring application, and 6 inches
tall for fall application. Allow at least 3 days following application before planting. A sequential
application of atrazine will be necessary for optimum results.
Pampasgrass 1.5 -2%
Apply when pampasgrass is at or beyond the boot stage of growth. Thorough coverage is necessary
for best control. .
Paragrass 2 3-5 3-20 2%
Phragmites 3-5 10 -40 1-2%
For partial control and best results, treat during late summer or fall when plants are actively growing
and in full bloom. Treatment before or after this stage could result in reduced control. Due to the dense
nature of this vegetation, which may prevent good spray coverage, or uneven stages of growth, repeat
treatments could be necessary to achieve control. Visual control symptoms will be slow to develop.
Poison hemlock 1 - 2%
With hand-held sprayers, apply as a spray-to-wet treatment. Optimum results are obtained when
plants are treated at the bud to full-bloom stage of growth. Thorough coverage is necessary for best
control.
Pokeweed, common 3 - 40 2%
Apply to actively growing plants up to 24 inches tall.
Quackgrass 1 - 3 3 - 40 2%
In annual cropping systems, or in pastures and sods followed by deep tillage, apply 1 quart of this
product in 3 to 10 gallons of water per acre, or 2 quarts in 10 to 40 gallons of water per acre. Do not
tank-mix with residual herbicides when using the 1-quart rate. Spray when quackgrass is 6 to 8 inches
in height. Do not till between harvest and fall application, or in the fall or spring prior to spring
application. Allow 3 or more days after application before tillage. In pastures or sods, use a moldboard
plow for best results.
In pastures, sods or non-crop areas where deep tillage does not follow application, apply 2 to 3 quarts
of this product in 10 to 40 gallons of water per acre when quackgrass is greater than 8 inches tall.
Redvine 0.75-2 5-10 2%
For suppression, make two applications of 1.5 pints of this product per acre 7 to 14 days apart or a
single application of 2 quarts per acre. Apply these rates in 5 to 10 gallons of water per acre. Apply in
late September or early October to plants that are at least 18 inches tall and have been growing 45 to
60 days since the last tillage operation and at least 1 week before a killing frost.
Reed, giant 2%
Best results are obtained when application is made in late summer or fall.
Ryegrass, perennial 1 - 3 3 - 40 1 %
In annual cropping systems, apply 1 to 2 quarts of this product per acre in 3 to 10 gallons of water per
acre, or 2 quarts of this product when applying 10 to 40 gallons of water per acre. In non-crop areas or
areas where annual tillage is not practiced (no-till), apply 2 to 3 quarts of this product in 10 to 40
gallons of water per acre.
For best results, apply when most plants have reached the boot to head stage of development or in the
fall prior to frost. Do not tank-mix with residual herbicides when applying 1 quart of this product per
acre.
Smartweed, swamp1 3-5 3-40 2%
Master Label 524-454 Page 77 of 139 Submitted August 26, 2009

I. MAIN LABEL FOR FOOD CROP USES
Also for control, apply 1 pint of this product plus 0.5 pound of 2,4-0 in 3 to 10 gallons of water per acre
in the late summer or fall.
Sowthistle, perennial 2 - 3 3 - 40 2%
Apply when most plants are at or beyond the bud stage of growth. After harvest, mowing or tillage in
late summer or fall, allow at least 4 weeks for initiation of active growth and rosette development prior
to application of this product. Fall treatment must be made before a killing frost. Allow 3 or more days
after application before tillage.
Spurge, leafy 3 - 10 2%
For suppression, apply 1 pint of this product plus 0.5 pound of 2,4-0 in 3 to 10 gallons of water per
acre in late summer or fall. If mowing has occurred prior to treatment, apply when most plants are 12
inches tall.
Starthistle, yellow 2 10 - 40 2%
Best results are obtained when application is made during the rosette, bolting or early flower stages.
Sweet potato, wild 2%
For partial control, apply to plants that are at or beyond the bloom stage of growth. Repeat applications
may be required.
Thistle, artichoke 2%
For partial control, apply to plants that are at or beyond the bloom stage of growth. Repeat applications
may be required.
Thistle, Canada 2 - 3 3 - 40 2%
Apply when most plants are at or beyond the bud stage of growth. After harvest, mowing or tillage in
late summer or fall, allow at least 4 weeks for initiation of active growth and rosette development prior
to application of this product. Fall treatment must be applied before a killing frost. Allow 3 or more days
after application before tillage.
For suppression in the spring, apply 1 quart of this product alone, or 1 pint of this product plus 0.5
pound of 2,4-0, in 3 to 10 gallons of water per acre. Allow rosette re-growth to a minimum of 6 inches
in diameter before treating. Application can be made as long as leaves are still green and plants are
actively growing at the time of application. Allow 3 or more days after application before tillage.
Timoth~ 2 - 3 3 -40 2%
Torpedograss 4 - 5 3 - 40 2%
For partial control, apply when most plants are at or beyond the seed head stage of
development. Repeat applications will be required to achieve control. Fall treatment must be applied
before frost.
Trumpetcreeper 2 5 - 10 2%
For partial control, apply in late September or October, to plants that are at least 18 inches tall and
have been growing 45 to 60 days since the last tillage operation. Apply at least 1 week before a killing
frost.
Vaseygrass 2 3-5 3 -20 2%
Velvetgrass 2 3-5 3-20 2%
Wheatgrass, western2 2-3 3 -40 2%
1 Apply when most plants have reached the early bud stage of growth.
2 Apply when most plants have reached the early heading stage of growth.
16.0 WOODY BRUSH AND TREES RATE SECTION
Master Label 524-454 Page 78 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
Apply this product after full leaf expansion, unless otherwise directed. Use the higher rate for larger plants
and/or dense areas of growth. On vines, use the higher rate for plants that have reached the woody stage
of growth. Best results are obtained when application is made in late summer or fall after fruit formation.
In arid areas, best results are obtained when application is made in the spring to early summer when
brush species are at high moisture content and are flowering.
Unless otherwise directed, apply broadcast treatments in 3 to 40 gallons of water per acre. Ensure
thorough coverage when using hand-held equipment. Symptoms may not appear prior to frost or
senescence with fall treatment.
Allow 7 or more days after application before tillage, mowing or removal. Repeat treatments may be
necessary to control plants regenerating from underground parts or seed. Some autumn colors on
undesirable deciduous species are acceptable provided no major leaf drop has occurred. Reduced
performance may result if fall treatment is made following a frost.
WOODY BRUSH AND TREES RATE TABLE
Rate Water Volume Hand-Held
Weed Species (QT/A) (GPA) % Solution
Alder 3-4 3-40 1 -1.5%
2-5 3-40 1 -2%
Aspen, quaking 2 - 3 3 - 40 1 - 1.5%
Bearmat (Bearclover) 1 2 - 5 3 - 40 1 - 2%
Beech 1 2 - 5 3 - 40 1 - 2%
Birch 2 - 3 3 - 40 1 - 1.5%
Blackberry 3 - 4 10 - 40 1 - 1.5%
Apply after plants have reached full leaf maturity. Best results are obtained when application is
made in late summer or fall. Application may also be made after leaf drop and until a killing frost or
as long as stems are green. After berries have set or dropped in late fall, blackberry can be
controlled by applying a 0.75 percent solution of this product. For control of blackberries after leaf
drop and until killing frost or as long as stems are green, apply 3 to 4 quarts of this product in 10 to
40 gallons of water per acre.
Blackgum 2-5 3-40 1-2%
Bracken 2-5 3-40 1-2%
Broom; French,Scotch 1.5 -2%
Buckwheat,California 1.2 1-2%
Cascara1 2-5 3-40 1-2%
Catsclaw1 1 -1.5%
Ceanothus 1 2-5 3-40 1-2%
Chamise2 1%
Cherry; bitter, black, pin 2-3 3-40 1 -1.5%
Coyote brush 1.5- 2%
Apply when at least 50 percent of the new leaves are fully developed.
Dogwood 1 2 - 5 3 - 40 1-2%
Elderberry 2 - 3 3 - 40 1 -1.5%
Elm 1 2 - 5 3 - 40 1-2%
Master Label 524-454 Page 79 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
Eucalyptus 2%
For control of eucalyptus re-sprouts, apply when re-sprouts are 6 to 12 feet tall. Ensure complete
coverage. Avoid application to drought-stressed plants.
Florida holly (Brazilian Peppertree) 1 2 - 5 3-40 1-2%
Gorsel 2 - 5 3-40 1 -2%
Hasardia 1,2 1-2%
Hawthorn 2-3 3-40 1 -1.5%
Hazel 2-3 3-40 1 - 1.5%
Hickoryl 2-5 3-40 1-2%
Honeysuckle 3-4 3-40 1 - 1.5%
Hornbeam, American 1 2-5 3-40 1-2%
Kudzu 4-5 3-40 2%
Repeat applications may be required to achieve control.
Locust, black 1 2 - 4 3-40 1-2%
Madrone resprouts 1 2%
Apply to re-sprouts that are 3 to 6 feet tall. Best results are obtained with spring/early summer
treatment.
Manzanita l 2 - 5 3 - 40 1 - 2%
Maple, red 2 - 4 3 - 40 1 - 1.5%
Apply a 1 to 1.5-percent solution when at least 50 percent of the new leaves are fully developed.
For partial control, apply 2 to 4 quarts of this product per acre.
Maple, sugar 1 - 1.5%
Apply when at least 50 percent o'f the new leaves are fully developed.
Monkey flower l ,2 1-2%
Oak; black,white l 2-4 3-40 1-2%
Oak, post 3-4 3-40 1 - 1.5%
Oak; northern, 1 -1.5%
Apply when at least 50 percent of the new pin leaves are fully developed
Oak; southern red 2 - 3 3 - 40 1 -1.5%
Persimmon 1 2 - 5 3 - 40 1 - 2%
Pine 2 - 5 3 - 40 1 - 2%
Poison ivy/Poison oak 4 - 5 3 - 40 2%
Repeat applications may be required to achieve control. Fall treatment must be applied before
leaves lose green color.
Poplar, yellow l 2 - 5 3 - 40 1 - 2%
Redbud, eastern 2-5 3-40 1-2%
Rose, multiflora 2 3-40 1%
Treat prior to leaf deterioration by leaf-eating insects.
Russian olive 1 2-5 3-40 1-2%
Sage, black l,2 1%
Sage, white 1 2-5 3-40 1-2%
Sage brush, California2 1%
Salmonberry '2-3 3-40 1 -1.5%
Master Label 524-454 Page 80 of 139 Submitted August 26, 2009

)
I. MAIN LABEL FOR FOOD CROP USES
Salt-cedar 2-5 3-40 1-2%
Sassafras
1
2-5 3-40 1-2%
Sourwood 1 2-5 3-40 1-2%
Sumac; poison, smooth, winged1 2 - 4 3 - 40 1 - 2%
Sweetgum 2-3 3-40 1-1.5%
Swordfern 1 2 - 5 3 - 40 1 - 2%
Tallowtree, Chinese2 1 %
Tan oak res prouts 1 2%
Apply to re-sprouts that are less than 3 to 6 feet tall. Best results are obtained with fall application.
Thimbleberry 2 - 3 3 - 40 1 - 1.5%
Tobacco, tree1 1 - 2%
Trumpetcreeper 2 - 3 3 - 40 1 - 1.5%
Vine maple1 2 - 5 3 -40 1 - 2%
Virginia creeper 2 - 5 3 - 40 1 - 2%
Waxmyrtle, Southern 1 2 - 5 3 - 40 1 - 2%
Willow 3 -4 3 -40 1 -1.5%
1 Partial Control
2 Thorough coverage of foliage is necessary for best results.
17.0 LIMIT OF WARRANTY AND LIABILITY
[INSERT COMPANY NAME] warrants that this product conforms to the chemical description on the label
and is reasonably fit for the purposes set forth in the Complete Directions for Use label booklet
("Directions") when used in accordance with those Directions under the conditions described therein. TO
THE EXTENT CONSISTENT WITH APPLICABLE LAW, NO OTHER EXPRESS WARRANTY OR
IMPLIED WARRANTY OF FITNESS FOR PARTICULAR PURPOSE OR MERCHANTABILITY IS
MADE. This warranty is also subject to the conditions and limitations stated herein.
Buyer and all users shall promptly notify this Company of any claims whether based in contract,
negligence, strict liability, other tort or otherwise.
To the extent consistent with applicable law, buyer and all users are responsible for all loss or damage
from use or handling which results from conditions beyond the control of this Company, including, but not
limited to, incompatibility with products other than those set forth in the Directions, application to or
contact with desirable vegetation, failure of this product to control weed biotypes which develop
resistance to glyphosate, unusual weather, weather conditions which are outside the range considered
normal at the application site and for the time period when the product is applied, as well as weather
conditions which are outside the application ranges set forth in the Directions, application in any manner
not explicitly set forth in the Directions, moisture conditions outside the moisture range specified in the
Directions, or the presence of products other than those set forth in the Directions in or on the soil, crop
or treated vegetation.
This Company does not warrant any product reformulated or repackaged from this product except in
accordance with this Company's stewardship requirements and with express written permission from this
Company.
For in-crop (over-the-top) uses on Roundup Ready crops, crop safety and weed control performance are
not warranted by [INSERT COMPANY NAME] when this product is used in conjunction with "brown bag"
or "bin run" seed saved from previous year's production and replanted.
Master Label 524-454 Page 81 of 139 Submitted August 26. 2009

I. MAIN LABEL FOR FOOD CROP USES
'1
/
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER
OR BUYER, AND THE LIMIT OF THE LIABILITY OF THIS COMPANY OR ANY OTHER SELLER FOR
ANY AND ALL LOSSES, INJURIES OR DAMAGES RESULTING FROM THE USE OR HANDLING OF
THIS PRODUCT (INCLUDING CLAIMS BASED IN CONTRACT, NEGLIGENCE, STRICT LIABILITY,
OTHER TORT OR OTHERWISE) SHALL BE THE PURCHASE PRICE PAID BY THE USER OR BUYER
FOR THE QUANTITY OF THIS PRODUCT INVOLVED, OR, AT THE ELECTION OF THIS COMPANY
OR ANY OTHER SELLER, THE REPLACEMENT OF SUCH QUANTITY, OR, IF NOT ACQUIRED BY
PURCHASE, REPLACEMENT OF SUCH QUANTITY. TO THE FULLEST EXTENT PERMITTED BY
LAW, IN NO EVENT SHALL THIS COMPANY OR ANY OTHER SELLER BE LIABLE FOR ANY
INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES.
Upon opening and using this product, buyer and all users are deemed to have accepted the terms of this
LIMIT OF WARRANTY AND LIABILITY which may not be varied by any verbal or written agreement. If
terms are not acceptable, return at once unopened.
Amplify, Bullet, Degree, Farmsource, Harness, Lariat, Micro-Tech, Monsanto and Vine symbol, and
Permit are trademarks of Monsanto Technology LLC.
All other trademarks are the property of their respective owners.
EPA Reg. No. 524-454
© [DATE]
[INSERT COMPANY NAME]
[INSERT COMPANY ADDRESS]
Master Label 524-454 Page 82 of 139 Submitted August 26, 2009

1
I
\
,I
III. MAIN LABEL FOR INDUSTRIAL, TURF AND ORNAMENTAL USES
[INSERT BRAND NAME]
Herbicide
The complete broad-spectrum postemergence herbicide for non-crop, industrial, turf and ornamental
weed control.
Complete Directions for Use
EPA Reg. No. 524-454
AVOID CONTACT OF HERBICIDE WITH FOLIAGE, GREEN STEMS, EXPOSED NON-WOODY
ROOTS OR FRUIT OF CROPS), DESIRABLE PLANTS AND TREES, BECAUSE SEVERE INJURY OR
DESTRUCTION IS LIKELY TO RESULT.
Read the entire label before using this product.
Use only according to label instructions.
Not all products listed on this label are registered for use in California. Check the registration status of
each product in California before using.
Read the "LIMIT OF WARRANTY AND LIABILITY" statement at the end of the label before buying or
using. If terms are not acceptable, return at once unopened.
THIS IS AN END-USE PRODUCT. [INSERT COMPANY NAME] DOES NOT INTEND AND HAS NOT
REGISTERED IT FOR REFORMULATION. SEE INDIVIDUAL CONTAINER LABEL FOR
REPACKAGING LIMITATIONS.
[Optional Container Label Statement: THIS IS AN END-USE PRODUCT. [INSERT COMPANY NAME]
DOES NOT INTEND AND HAS NOT REGISTERED IT FOR REFORMULATION. REPACKAGING OF
THIS PRODUCT FOR DISTRIBUTION OR SALE MAY BE CONDUCTED ONLY UNDER THE TERMS
OF A WRITTEN CONTRACT WITH [INSERT COMPANY NAME].]
[Optional Container Label Statement: THIS IS AN END-USE PRODUCT. [INSERT COMPANY NAME]
DOES NOT INTEND AND HAS NOT REGISTERED IT FOR REFORMULATION OR REPACKAGING.]
CONTENTS
1 1.0
2 2.0
3 3.0
3.1
3.2
3.3
4 4.0
5 5.0
5.1
5.2
INGREDIENTS
IMPORTANT PHONE NUMBERS
PRECAUTIONARY STATEMENTS
Hazards to Humans and Domestic Animals
Environmental Hazards
Physical or Chemical Hazards
STORAGE AND DISPOSAL
PRODUCT INFORMATION
Weed Resistance Management
Management of Glyphosate-Resistant Weed Biotypes
Master Label 524-454 Page 83 of 139 Submitted August 26, 2009

)
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
6 6.0 MIXING
6.1 Mixing with Water
6.2 Tank Mixing
6.3 Tank Mixing Procedure
6.4 Mixing for Hand-Held Sprayers
6.5 Surfactants
6.6 Colorants or Dyes
7 7.0 APPLICATION EQUIPMENT AND TECHNIQUES
7.1 Aerial Equipment
7.2 Ground Broadcast Equipment
7.3 Hand-Held or Backpack Equipment
7.4 Selective Equipment
7.5 Injection Systems
7.6 CDA Equipment
8 8.0 SITE AND USE INSTRUCTIONS
8.1 Cut Stump
8.2 Forestry Site Preparation
8.3 Use Areas and Industrial Sites
8.4 Turfgrass
8.5 Habitat Management
8.6 Hollow Stem Injection
8.7 Injection and Frill (Woody Brush and Trees)
8.8 Non-food Tree, Shrub, and Vine Production Sites
8.9 Parks, Recreational and Residential Areas
8.10 Railroads
8.11 Roadsides
8.12 Rangelands
8.13 Utility Sites
8.14 Grass Seed or Sod Production
8.15 Pastures
9 9.0 WEEDS CONTROLLED
9.1 Annual Weeds
9.2 Perennial Weeds
9.3 Woody Brush and Trees
10 10.0 LIMIT OF WARRANTY AND LIABILITY
1.0 INGREDIENTS
ACTIVE INGREDIENT:
*Glyphosate, N-(phosphonomethyl)glycine, in the form of its isopropylamine saiL................ 41.0%
OTHER INGREDIENTS: ........................................................................................................... 59.0%,
100.0%
* Contains 480 grams per liter or 4 pounds per U.S. gallon of the active ingredient glyphosate, in the form
of its isopropylamine salt. Equivalent to 356 grams per liter or 3 pounds per U.S. gallon of the acid,
glyphosate.
Master Label 524-454 Page 84 of 139 Submitted August 26, 2009

)
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
No license granted under any non-U.S. patent(s).
2.0 IMPORTANT PHONE NUMBERS
1. FOR PRODUCT INFORMATION OR ASSISTANCE IN USING THIS PRODUCT,
CALL TOLL-FREE,
[INSERT PHONE NUMBER]
3. IN CASE OF AN EMERGENCY INVOLVING THIS HERBICIDE PRODUCT, OR FOR MEDICAL
ASSISTANCE, CALL COLLECT, DAY OR NIGHT,
[INSERT PHONE NUMBER]
3.0 PRECAUTIONARY STATEMENTS
3.1 Hazards to Humans and Domestic Animals
Keep out of reach of children
WARNING! AVISO!
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do
not understand the label, find someone to explain it to you in detail.
CAUSES SUBSTANTIAL BUT TEMPORARY EYE INJURY
HARMFUL IF SWALLOWED OR INHALED
Do not get in eyes or on clothing.
Avoid breathing vapor or spray mist.
FIRST AID: Call a poison control center or doctor for treatment advice.
IF IN EYES • Hold eye open and rinse slowly and gently with water for 15 to 20
minutes.
• Remove contact lenses if present after the first 5 minutes then continue
rinsing eye.
IF INHALED • Move person to fresh air.
• If person is not breathing, call 911 or an ambulance, then give artificial
respiration, preferably mouth-to-mouth if possible.
IF SWALLOWED • Have person sip a glass of water if able to swallow.
• Do not induce vomiting unless told to by a pOison control center or doctor.
• Do not give anything to an unconscious person.
• Have the product container or label with you when calling a poison control center or doctor, or
going for treatment.
• You may also contact [INSERT PHONE NUMBER], collect day or night, for emergency
medical treatment information.
• This product is identified as [INSERT BRAND NAME], EPA Registration No. 524-454.
DOMESTIC ANIMALS: This product is considered to be relatively nontoxic to dogs and other domestic
animals; however, ingestion of this product or large amounts of freshly sprayed vegetation may result in
Master Label 524-454 Page 85 of 139 Submitted August 26, 2009

II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
temporary gastrointestinal irritation (vomiting, diarrhea, colic, etc.). If such symptoms are observed,
provide the animal with plenty of fluids to prevent dehydration. Call a veterinarian if symptoms persist for
more than 24 hours.
Personal Protective Equipment (PPE)
Applicators and other handlers must wear: long-sleeved shirt and long pants, shoes plus socks, and
protective eyewear. Follow manufacturer's instructions for cleaning/maintaining PPE. If no such
instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other
laundry.
Discard clothing and other absorbent materials that have been drenched or heavily contaminated with
this product's concentrate. Do not reuse them.
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements
listed in Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d) (4-6)], the
handler PPE requirements may be reduced or modified as specified in the WPS.
User Safety Recommendations
Users should:
• Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet.
• Remove clothing immediately if pesticide gets inside.
• Then wash thoroughly and put on clean clothing.
3.2 Environmental Hazards
Do not apply directly to water, to areas where surface water is present or to intertidal areas below the
mean high water mark. Do not contaminate water when cleaning equipment or disposing of equipment
washwaters.
3.3 Physical or Chemical Hazards
Spray solutions of this product may be mixed, stored and applied using only stainless steel, fiberglass,
plastic or plastic-lined steel containers.
DO NOT MIX, STORE OR APPLY THIS PRODUCT OR SPRAY SOLUTIONS OF THIS PRODUCT IN
GALVANIZED STEEL OR UNLINED STEEL (EXCEPT STAINLESS STEEL) CONTAINERS OR SPRAY
TANKS. This product or spray solutions of this product react with such containers and tanks to produce
hydrogen gas which may form a highly combustible gas mixture. This gas mixture could flash or explode,
causing serious personal injury, if ignited by open flame, spark, welder's torch, lighted cigarette or other
ignition source.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in any manner inconsistent with its labeling. This product
can only be used in accordance with the Directions for Use on this label or in separately published
supplemental labeling. Supplemental labeling can be found on the Internet at www.agrian.com.
www.cdms.net, or www.greenbook.net websites, or obtained by contacting your authorized [INSERT
COMPANY NAME] retailer or [INSERT COMPANY NAME] representative.
Do not apply this product in a way that will contact workers or other persons, either directly or through
drift. Only protected handlers may be in the area during application. For any requirements specific to
your State or Tribe, consult the agency responsible for pesticide regulations.
Master Label 524-454 Page 86 of 139 Submitted August 26, 2009

)
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
The following paragraph is reserved and will only appear on final printed labeling for products
under this registration if and when required by EPA:
ENDANGERED SPECIES PROTECTION REQUIREMENTS: This product may have effects on federally
listed threatened or endangered species or their critical habitat in some locations. When using this
product, you must follow the measures contained in the Endangered Species Protection Bulletin for the
county or parish in which you are applying the pesticide. To determine whether your county or parish has
a Bulletin, and to obtain that Bulletin, consult http://www.epa.gov/espp/,or call 1-800-447-3813 no more
than 6 months before using this product. Applicators must use Bulletins that are in effect in the month in
which the pesticide will be applied. New Bulletins will generally be available from the above sources 6
months prior to their effective dates.
Agricultural Use Requirements
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR
Part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests,
nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training,
decontamination, notification, and emergency assistance. It also contains specific instructions and
exceptions pertaining to the statements on this label about personal protective equipment (PPE) and
restricted entry interval. The requirements in this box only apply to uses of this product that are covered
by the Worker Protection Standard.
Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours.
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and
that involves contact with anything that has been treated, such as plants, soil, or water, is: coveralls,
chemical resistant gloves greater than 14 mils in thickness composed of materials such as butyl rubber,
natural rubber, neoprene rubber, or nitrile rubber, shoes plus socks and protective eyewear.
Non-Agricultural Use Requirements
The requirements in this box apply to uses of this product that are NOT within the scope of the Worker
Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is
used to produce agricultural plants on farms, forests, nurseries or greenhouses.
Keep people and pets off treated preas until spray solution has dried.
4.0 STORAGE AND DISPOSAL
Proper pesticide storage and disposal are essential to protect against exposure to people and the
environment due to leaks and spills, excess product or waste, and vandalism. Do not allow this product to
contaminate water, foodstuffs, feed or seed by storage or disposal.
PESTICIDE STORAGE: Store pesticides away from food, pet food, feed, seed, fertilizers, and veterinary
supplies. Keep container closed to prevent spills and contamination.
PESTICIDE DISPOSAL: To avoid wastes, use all material in this container, including rinsate, by
application according to label directions. If wastes cannot be avoided, offer remaining product to a waste
disposal facility or pesticide disposal program. Such programs are often run by state or local governments
or by industry. All disposal must be in accordance with applicable federal, state and local regulations and
procedures.
CONTAINER HANDLING AND DISPOSAL: See container label for container handling and disposal
instructions and refilling limitations.
Master Label 524-454 Page 87 of 139 Submitted August 26. 2009

)
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
[CONTAINER HANDLING AND DISPOSAL STATEMENTS AND REFILLING LlMITA TlONS FOR
CONTAINER LABELS:]
[CONTAINER HANDLING AND DISPOSAL STA TEMENT AND REFILLING LIMITATION FOR
NONREFILLABLE RIGID CONTAINERS OF LESS THAN 1-GALLON CAPACITy]
Nonrefillable container. Do not reuse or refill this container.
[Alternate container statement: Nonrefillable container. Do not reuse this container to hold materials
other than pesticides or dilute pesticides (rinsate). After emptying and cleaning, it may be allowable to
temporarily hold rinsate or other pesticide-related materials in the container. Contact your state
regulatory agency to determine allowable practices in your state.]
Triple rinse this container promptly after emptying.
Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain
for 10 seconds after the flow begins to drip. Fill the container % full with water and recap. Shake for 10
seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal.
Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times.
Then offer this container for recycling, if available. If recycling is not available, dispose of in accordance
with federal, state and local regulations and procedures, which may include puncturing the properly
rinsed container and disposing in a sanitary landfill.
[Alternate container disposal statement: Once properly rinsed, some agricultural plastic pesticide
containers can be taken to a container collection site or picked up for recycling. [Optional container
disposal statement: To find the nearest site, contact your chemical dealer or [INSERT COMPANY
NAME] at [INSERT PHONE NUMBER].] If recycling is not available, dispose of in accordance with
federal, state and local regulations and procedures, which may include puncturing the properly rinsed
container and disposing in a sanitary landfilL]
[Optional container statement: This container is not to be sold to homeowners for residential use.]
[CONTAINER HANDLING AND DISPOSAL STATEMENT AND REFILLING LIMITATION FOR
NONREFILLABLE RIGID PLASTIC 2.5-GALLON CONTAINERS AND OTHER CONTAINERS OF
GREA TER THAN 1-GALLON BUT EQUAL TO OR LESS THAN 5-GALLON CAPACITY]
Nonrefillable container. Do not reuse this container to hold materials other than pesticides or dilute
pesticides (rinsate). After emptying and cleaning, it may be allowable to temporarily hold rinsate or other
pesticide-related materials in the container. Contact your state regulatory agency to determine allowable
practices in your state.
[Alternate container statement: Nonrefillable container. Do not reuse or refill this container.]
Triple rinse or pressure rinse (or equivalent) this container promptly after emptying.
Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain
for 10 seconds after the flow begins to drip. Fill the container % full with water and recap. Shake for 10
seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal.
Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times.
Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and
continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over
application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing
nozzle in the side of the container, and rinse at about 40 PSI for at least 30 seconds. Drain for 10
seconds after the flow begins to drip.
Master Label 524-454 Page 88 of 139 Submitted August 26, 2009

II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
Once properly rinsed, some agricultural plastic pesticide containers can be taken to a container collection
site or picked up for recycling. [Optional container disposal statement: To find the nearest site, contact
your chemical dealer or [INSERT COMPANY NAME] at [INSERT PHONE NUMBER].] If recycling is not
available, dispose of in accordance with federal, state and local regulations and procedures, which may
include puncturing the properly rinsed container and disposing in a sanitary landfill.
[Alternate container disposal statement: Then offer this container for recycling, if available. If recycling is
not available, dispose of in accordance with federal, state and local regulations and procedures, which
may include puncturing the properly rinsed container and disposing in a sanitary landfill.]
[Optional container statement: This container is not to be sold to homeowners for residential use.]
[CONTAINER HANDLING AND DISPOSAL STATEMENT AND REFILLING LlMITA TlON FOR
NONREFILLABLE RIGID PLASTIC 30-GALLON CONTAINERS AND OTHER CONTAINERS OF
GREATER THAN 5-GALLON CAPACITY]
Nonrefillable container. Do not reuse or refill this container.
[Alternate container statement: Nonrefillable container. Do not reuse this container to hold materials other
than pesticides or dilute pesticides (rinsate). After emptying and cleaning, it may be allowable to
temporarily hold rinsate or other pesticide-related materials in the container. Contact your state
regulatory agency to determine allowable practices in your state.]
Triple rinse or pressure rinse (or equivalent) this container promptly after emptying.
Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. Fill the
container % full with water. Replace and tighten closures. Tip container on its side and roll it back and
forth, ensuring at least one revolution, for 30 seconds. Stand the container on its end and tip it back and
forth several times. Turn the container over onto its other end tip it back and forth several times. Empty
the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Repeat this
procedure two more times.
Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and
continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over
application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing
nozzle in the side of the container, and rinse at about 40 PSI for at least 30 seconds. Drain for 10
seconds after the flow begins to drip.
Once properly rinsed, some agricultural plastic pesticide containers can be taken to a container collection
site or picked up for recycling. [Optional container disposal statement: To find the nearest site, contact
your chemical dealer or [INSERT COPMPANY NAME] at [INSERT PHONE NUMBER].] If recycling is
not available, dispose of in accordance with federal, state and local regulations and procedures, which
may include puncturing the properly rinsed container and disposing in a sanitary landfill.
[Alternate container disposal statement: Then offer this container for recycling, if available. If recycling is
not available, dispose of in accordance with federal, state and local regulations and procedures, which
may include puncturing the properly rinsed container and disposing in a sanitary landfill.]
[Optional container label statement: Return Properly Rinsed Container to Monsanto for Recycling
Contact: 1-800-ROUNDUP (1-800-768-6387)]
[CONTAINER HANDLING AND DISPOSAL STATEMENT AND REFILLING LIMITATION FOR ALL
REFILLABLE CONTAINERS, EXCEPT TRANSPORT CONTAINERS]
Refillable container. Refill this container with pesticide only. Do not reuse this container for any other
purpose.
Master Label 524-454 Page 89 of 139 Submitted August 26. 2009

) )
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
Cleaning this container before refilling is the responsibility of the refiller. Cleaning this container before
final disposal is the responsibility of the person disposing of the container.
To clean this container before final disposal, empty the remaining contents from this container into
application equipment or a mix tank. Fill the container about 10 percent full with water. Agitate
vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application
equipment or rinsate collection system. Repeat this rinsing procedure two more times. Then offer this
container for recycling, if available.
[Optional container label statement: To obtain information about recycling refillable containers, contact
[INSERT COMPANY NAME] at [INSERT PHONE NUMBER]]
[Optional container label statement: Return Properly Rinsed Container to Monsanto for Recycling,
Contact 1-800-ROUNDUP (1-800-768-6387)]
[CONTAINER HANDLING AND DISPOSAL STATEMENT FOR ALL TRANSPORT CONTAINERS AS
DEFINED IN 40 CFR 156.3]
Emptied container retains vapor and product residue. Observe all precautions stated on this label until
the container is cleaned, reconditioned or destroyed. Prior to refilling, inspect carefully for damage such
as cracks, punctures, abrasions, and worn-out threads and closures. Clean thoroughly before reuse for
transportation of a material of different composition or before retiring this transport vehicle from service.
5.0 PRODUCT INFORMATION
Product Description: This product is a postemergence, systemic herbicide with no soil residual activity.
It gives broad-spectrum control of many annual weeds, perennial weeds, woody brush and trees. It is
formulated as a water-soluble liquid containing surfactant.
Time to Symptoms: This product moves through the plant from the point of foliage contact to and into
the root system. Visual effects are a gradual wilting and yellowing of the plant that advances to complete
browning of above ground growth and deterioration of underground plant parts. Effects are visible on
most annual weeds within 2 to 4 days, but on most perennial weeds may not occur for 7 or more days.
Extremely cool or cloudy weather following treatment may slow activity of this product and delay
development of visual symptoms.
Stage of Weeds: Annual weeds are easiest to control when they are small. Best control of most
perennial weeds is obtained when treatment is made at later growth stages approaching maturity.
Mode of Action in Plants: The active ingredient in this product inhibits an enzyme found only in plants
and microorganisms that is essential to the formation of specific amino acids.
Cultural Considerations: Reduced control may result when applications are made to annual or
perennial weeds that have been mowed, grazed or cut, and have not been allowed to re-grow to the
specified stage for treatment.
Rainfastness: Heavy rainfall soon after application may wash this product off of the foliage and a repeat
application may be required for adequate control.
No Soil Activity: Weeds must be emerged at the time of application to be controlled by this product.
Weeds germinating from seed after application will not be controlled. Plants arising from unattached
underground rhizomes or rootstocks of perennials that have not yet emerged at the time of application will
not be affected by the herbicide and will continue to grow.
Biological Degradation: Degradation of this product is primarily a biological process carried out by soil
microbes.
Master Label 524-454 Page 90 of 139 Submitted August 26, 2009

II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
Maximum Application Rates: The maximum application or use rates stated throughout this label are
given in units of volume (fluid ounces, pints or quarts) of this product per acre. However, the maximum
allowed application rates apply to this product combined with the use of any and all other herbicides
containing the active ingredient glyphosate, whether applied separately or as tank mixtures, on a basis of
total pounds of glyphosate (acid equivalents) per acre. If more than one glyphosate-containing product is
applied to the same site within the same year, you must ensure that the total use glyphosate (pounds
acid equivalents) does not exceed the maximum allowed. See the 'INGREDIENTS" section of this label
for necessary product information.
ATTENTION
AVOID CONTACT OF HERBICIDE WITH FOLIAGE, GREEN STEMS, EXPOSED NON-WOODY
ROOTS OR FRUIT OF CROPS, DESIRABLE PLANTS AND TREES, BECAUSE SEVERE INJURY OR
DESTRUCTION MAY RESULT.
AVOID DRIFT. EXTREME CARE MUST BE USED WHEN APPLYING THIS PRODUCT TO PREVENT
INJURY TO DESIRABLE PLANTS AND CROPS.
Do not allow the herbicide solution to mist, drip, drift or splash onto desirable vegetation since minute
quantities of this product can cause severe damage or destruction to the crop, plants or other areas on
which treatment was not intended. The likelihood of injury occurring from the use of this product
increases when winds are gusty, as wind velocity increases, when wind direction is constantly changing
or when there are other meteorological conditions that favor spray drift. When spraying, avoid
combinations of pressure and nozzle type that will result in splatter or fine particles (mist) that are likely to
drift. AVOID APPLYING AT EXCESSIVE SPEED OR PRESSURE.
NOTE: Use of this product in any manner not consistent with this label may result in injury to persons,
animals or crops, or have other unintended consequences.
5.1 Weed Resistance Management
GROUP I"·~ .,9,' :·1 HERBICIDE
Glyphosate, the active ingredient in this product, is a Group 9 herbicide based on the mode of action
classification system of the Weed Science Society of America. Any weed population may contain plants
naturally resistant to Group 9 herbicides. Weed species resistant to Group 9 herbicides may be
effectively managed utilizing another herbicide from a different Group or by using other cultural or
mechanical practices.
To minimize the occurrence of glyphosate-resistant biotypes observe the following weed management
practices:
• Scout your application site before and after herbicide application.
• Control weeds early when they are relatively small.
• Incorporate other herbicides and cultural or mechanical practices as part of your weed control system
where appropriate.
• Use the application rate for the most difficult to control weed on the site. Avoid tank mixtures with
other herbicides that reduce the efficacy of this product (through antagonism) or with ones that
encourage application rates of this product below those specified on this label.
• Control weed escapes and prevent weeds from setting seeds.
• Use new commercial seed that is as free of weed seed as possible.
Master Label 524-454 Page 91 of 139 Submitted August 26, 2009

~)
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
• Report any incidence of repeated non-performance of this product on a particular weed to your
[INSERT COMPANY NAME] representative, local retailer, or county extension agent.
5.2 Management of Glyphosate-Resistant Biotypes
Note: Appropriate testing is critical in order to confirm weed resistance to glyphosate. Contact your
[INSERT COMPANY NAME] representative to determine if resistance in any particular weed biotype has
been confirmed in your area. Directions for the control of biotypes confirmed to be resistant to glyphosate
are made available on separately published supplemental labeling or Fact Sheets for this product and
can be obtained from your local retailer or [INSERT COMPANY NAME] representative.
Since the occurrence of new glyphosate-resistant weeds cannot be determined until after product use
and scientific confirmation, [INSERT COMPANY NAME] is not responsible for any losses that may result
from the failure of this product to control glyphosate-resistant weed biotypes.
The following good agronomic practices can reduce the spread of confirmed glyphosate-resistant
biotypes:
• If a naturally occurring resistant biotype is present in your field, this product can be tank-mixed or
applied sequentially with an appropriately labeled herbicide with a different mode of action to achieve
control.
• Cultural and mechanical control practices may also be used as appropriate.
• Scout treated sites after herbicide application and control escapes of resistant biotypes before they
set seed.
• Thoroughly clean equipment before a site known to contain resistant biotypes.
6.0 MIXING
Spray solutions of this product may be mixed, stored, and applied using only clean stainless steel, plastic,
fiberglass, plastic or plastic-lined steel containers. Clean sprayer parts promptly after using this product
by thoroughly flushing with water. Use caution to avoid siphoning back into the carrier source. Use
approved anti-back-siphoning devices where required by state or local regulations.
6.1 Mixing with Water
NOTE: PRODUCT PERFORMANCE MAY BE SIGNIFICANTLY REDUCED IF WATER CONTAINING
SOIL SEDIMENT IS USED AS A CARRIER. DO NOT MIX THIS PRODUCT WITH WATER FROM
PONDS AND DITCHES THAT IS VISIBLY MUDDY OR MURKY.
This product mixes readily with water. Mix spray solutions of this product as follows: Begin filling the
mixing tank or spray tank with clean water. Add the required amount of this product near the end of the
filling process and mix well. During mixing and application, foaming of the spray solution may occur. To
prevent or minimize foaming, mix gently, terminate by-pass and return lines at the bottom of the tank and,
if necessary, use an anti-foam or defoaming agent.
6.2 Tank-Mixing
This product does not provide residual weed control. This product may be tank-mixed with other
herbicides to provide residual weed control, a broader weed control spectrum or an alternate mode of
action. Read and carefully observe the cautionary statements and all other information appearing on the
labels of all herbicides used. Use according to the most restrictive precautionary statements for each
product in the mixture.
When this label lists a tank mixture with a generic active ingredient such as diu ron, atrazine, 2,4-D, or
dicamba, the user is responsible for ensuring that the specific application being made is included on the
label of the product being used in the tank mixture. Refer to all individual product labels, supplemental
Master Label 524-454 Page 92 of 139 Submitted August 26, 2009

II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
labeling and Fact Sheets for all products in the tank mixture and observe all precautions and limitations
on the label, including application timing restrictions, soil restrictions and use according to the most
restrictive precautionary statements for each product in the tank mixture. Always predetermine the
compatibility of all tank-mix products together in the carrier by mixing small proportional quantities in
advance.
Buyer and all users are responsible for any and all loss or damage in connection with the use or handling
of mixtures of this product with herbicides or other materials that are not expressly specified on this label.
Mixing this product with herbicides or other materials not specified on this label may result in reduced
performance.
6.3 Tank-Mixing Procedure
When tank-mixing, read and carefully observe label directions, cautionary statements and all information
on the labels of all products used. Add the tank-mix product to the tank as directed by the label. Maintain
agitation and add the required amount of this product. If needed, add nonionic surfactant before
completing the filling process.
Maintain good agitation at all times until the contents of the tank are sprayed. If the spray mixture is
allowed to settle, thorough agitation may be required to re-suspend the mixture before spraying is
resumed.
Keep by-pass line on or near the bottom of the tank to minimize foaming. Screen size in nozzle or line
strainers can be no finer than 50 mesh.
Always predetermine the compatibility of labeled tank mixtures of this product with water carrier by mixing
small proportional quantities in advance.
Refer to the "Tank Mixing" and "PRODUCT INFORMATION" sections for additional precautions.
6.4 Mixing for Hand-Held Sprayers
Prepare the desired spray volume by mixing the amount of this product indicated in the following table in
water:
Spray Solution
Amount of [INSERT BRAND NAME]
Desired
Volume 0.5% 1% 1.5% 2% 5% 10%
1 gal 0.70z 1.30z 20z 2.70z 6.50z 130z
25 gal 1 pt 1 qt 1.5 qt 2 qt 5 qt 10 qt
100 gal 2 qt 1 gal 1.5 gal 2 gal 5 gal 10 gal
2 tablespoons = 1 fluid ounce
For backpack, knapsack or pump-up sprayers, consider mixing the appropriate amount of this product
with water in a larger container, and then filling the sprayer from the larger container.
6.5 Surfactants
Nonionic surfactants (NIS) or wetting agents that have at least 70 percent active ingredient and are
labeled for use with herbicides may be added to the spray solution, unless otherwise directed. Do not
reduce rates of this herbicide when adding surfactants. Read and carefully observe cautionary
statements and other information appearing on the additives label.
6.6 Colorants or Dyes
Master Label 524-454 Page 93 of 139 Submitted August 26, 2009

)
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
Colorants or marking dyes may be added to spray solutions of this product; however, they can reduce
product performance, especially at lower rates or dilution. Use colorants or dyes according to the
manufacturer's directions.
7.0 APPLICATION EQUIPMENT AND TECHNIQUES
Do not apply this product through any type of irrigation system. Avoid direct application to any body of
water.
APPLY SPRAY SOLUTIONS IN PROPERLY MAINTAINED AND CALIBRATED EQUIPMENT CAPABLE
OF DELIVERING DESIRED VOLUMES.
Do not allow the herbicide solution to mist, drip, drift or splash onto desirable vegetation since minute
quantities of this product can cause severe damage or destruction to the crop, plants or other areas on
which treatment was not intended.
SPRAY DRIFT MANAGEMENT
AVOID DRIFT. EXTREME CARE MUST BE USED WHEN APPLYING THIS PRODUCT TO PREVENT
INJURY TO DESIRABLE PLANTS AND CROPS.
Avoiding spray drift at the application site is the responsibility of the applicator. The interaction of many
equipment and weather-related factors determine the potential for spray drift. The applicator and the
grower are is responsible for conSidering all these factors when making decisions.
AERIAL SPRAY DRIFT MANAGEMENT
The following drift management requirements must be followed to avoid off-target drift movement from
aerial application.
1. The distance of the outermost nozzles on the boom must not exceed 3/4 the length of the wingspan
or rotor.
2. Nozzles must always point backward parallel with the air stream and never be pointed downwards
more than 45 degrees. Where states have more stringent regulations, they must be observed.
Importance of Droplet Size
The most effective way to reduce drift potential is to apply large droplets. The best drift management
strategy is to apply the largest droplets that provide sufficient coverage and control. Applying larger
droplets reduces drift potential, but will not prevent drift if applications are made improperly, or under
unfavorable environmental conditions (see the "Wind", "Temperature and Humidity", and
"Temperature Inversion" sections of this label).
Controlling Droplet Size
• Volume: Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with the
higher rated flows produce larger droplets.
• Pressure: Use the lower spray pressures listed for the nozzle. Higher pressure reduces droplet size
and does not improve canopy penetration. When higher flow rates are needed, use higher flow rate
nozzles instead of increasing pressure.
• Number of nozzles: Use the minimum number of nozzles that provide uniform coverage.
• Nozzle orientation: Orienting nozzles so that the spray is released backwards, parallel to the
airstream, will produce larger droplets than other orientations. Significant deflection from the
horizontal will reduce droplet size and increase drift potential.
Master Label 524-454 Page 94 of 139 Submitted August 26, 2009

)
I )
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
• Nozzle type: Use a nozzle type that is designed for the intended application. With most nozzle
types, narrower spray angles produce larger droplets. Consider using low-drift nozzles. Solid stream
nozzles oriented straight back produce larger droplets than other nozzle types.
• Boom length: For some use patterns, reducing the effective boom length to less than 3/4 of the
wingspan or rotor length may further reduce drift without reducing swath width.
• Application height: Applications must not be made at a height greater than 10 feet above the top of
the largest plants unless a greater height is required for aircraft safety. Making applications at the
lowest height that is safe reduces the exposure of the droplets to evaporation and wind.
Swath Adjustment
When applications are made with a crosswind, the swath will be displaced downwind. Therefore, on the
up and downwind edges of the field, the applicator must compensate for this displacement by adjusting
the path of the aircraft upwind. Increase the swath adjustment distance with increasing drift potential
(higher wind, smaller droplets, etc.).
Wind
Drift potential is lowest between wind speeds of 2 to 10 mph. However, many factors, including droplet
size and equipment type determine drift potential at any given speed. Application must be avoided below
2 mph due to variable wind direction and high inversion potential. NOTE: Local terrain can influence wind
patterns. Every applicator must be familiar with local wind patterns and how they affect drift.
Temperature and Humidity
When making applications in low relative humidity, set up equipment to produce larger droplets to
compensate for evaporation. Droplet evaporation is most severe when conditions are both hot and dry.
Temperature Inversions
Applications must not occur during a temperature inversion because drift potential is high. Temperature
inversions restrict vertical air mixing, which causes small suspended droplets to remain in a concentrated
cloud. This cloud can move in unpredictable directions due to the light variable winds common during
inversions. Temperature inversions are characterized by increasing temperatures with altitude and are
common on nights with limited cloud cover and light to no wind. They begin to form as the sunsets and
often continue into the morning. Their presence can be indicated by ground fog; however, if fog is not
present, inversions can also be identified by the movement of smoke from a ground source or an aircraft
smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind
conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good
vertical air mixing.
Sensitive Areas
Apply this product only when the potential for drift to adjacent sensitive areas (e.g. residential areas,
bodies of water, known habitat for threatened or endangered species, non-target crops) is minimal (e.g.
when wind is blowing away from the sensitive areas).
7.1 Aerial Equipment
DO NOT APPLY THIS PRODUCT USING AERIAL SPRAY EQUIPMENT EXCEPT UNDER
CONDITIONS AS SPECIFIED WITHIN THIS LABEL.
FOR AERIAL APPLICATION IN CALIFORNIA, REFER TO THE FEDERAL SUPPLEMENTAL LABEL
FOR AERIAL APPLICATION OF THIS PRODUCT IN THAT STATE FOR SPECIFIC INSTRUCTIONS,
RESTRICTIONS AND REQUIREMENTS.
TO PREVENT INJURY TO ADJACENT DESIRABLE VEGETATION, APPROPRIATE BUFFER ZONES
MUST BE MAINTAINED.
Master Label 524-454 Page 95 of 139 Submitted August 26, 2009

".
)
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
Use the labeled rates of this herbicide in 3 to 25 gallons of water per acre unless otherwise specified on
this label, or in separate supplemental labeling or Fact Sheets published for this product
Drift reduction additives may be used. When a drift reduction additive is used, read and carefully observe
the cautionary statements and all other information appearing on the additive label.
Ensure uniform application. To avoid streaked, uneven or overlapped application, use appropriate
marking devices.
Aircraft Maintenance; Thoroughly wash aircraft, especially landing gear, after each day of spraying to
remove resides of this product accumulated during spraying or from spills. PROLONGED EXPOSURE
OF THIS PRODUCT TO UNCOATED STEEL SURFACES MAY RESULT IN CORROSION AND
POSSIBLE FAILURE OF THE PART. LANDING GEAR IS MOST SUSCEPTIBLE. Maintaining an organic
coating (paint) that meets aerospace specification MIL-C-38413 may prevent corrosion.
7.2 Ground Broadcast Equipment
Apply the labeled rates of this product in 3 to 40 gallons of water per acre as a broadcast spray unless
otherwise specified on this label or in separate supplemental labeling or Fact Sheets published for this
product. As the density of weeds increases, increase the spray volume within the labeled range to ensure
complete coverage. Carefully select proper nozzles to avoid spraying a fine mist For best results with
ground application equipment, use flat-fan nozzles. Check spray pattern for uniform distribution of spray
droplets.
7.3 Hand-Held or Backpack Equipment
Apply to foliage of vegetation to be controlled on a spray-to-wet basis; do not spray to the point of runoff.
For best results, ensure that spray coverage is uniform and complete. Use coarse sprays only.
For low-volume directed spray application, ensure that at lest 50 percent of the foliage is treated.
Coverage of the top one-half of the plant is important for best results. To ensure adequate spray
coverage, spray both sides of large or tall woody brush and trees, when foliage is thick and dense, or
where there are multiple sprouts.
7.4 Selective Equipment
This product may be diluted in water and applied through shielded applicators, hooded sprayers, wiper
applicators or sponge bars to weeds listed on this label that are growing in any specified non-crop site.
AVOID CONTACT OF HERBICIDE WITH DESIRABLE VEGETATION
Better results may be obtained when more of the weed is exposed to the herbicide solution. Weeds not
contacted by the herbicide solution will not be affected. This may occur in dense clumps, severe
infestations or when the height of the weeds varies so that not all weeds are contacted. In these
instances, repeat treatment may be necessary.
Shielded and Hooded Applicators
A shielded or hooded applicator directs the herbicide solution onto weeds, while shielding desirable
vegetation from the herbicide Use nozzles that provide uniform coverage within the treated area. Keep
shields on these sprayers adjusted to protect desirable vegetation. EXTREME CARE MUST BE
EXERCISED TO AVOID CONTACT OF HERBICIDE WITH DESIRABLE VEGETATION.
Wiper Applicators
Wiper applicators are devices that physically wipe the appropriate amounts of this product directly onto
the weed. Equipment must be designed, maintained and operated to prevent the herbicide solution from
contacting desirable vegetation.
Adjust the height of the wiper applicator to ensure adequate contact with weeds and so that the contact
point is at least 2 inches above the desirable vegetation. Better results can be obtained when more of the
Master Label 524-454 Page 96 of 139 Submitted August 26, 2009

) )
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
weed is exposed to the herbicide solution and weeds are a minimum of 6 inches above the desirable
vegetation. Weeds not contacted by the herbicide solution will not be affected. Poor contact can occur
when weeds are growing in dense clumps, in severe weed infestations or when weed height varies
dramatically. In these instances, repeat treatments may be necessary.
Operate this equipment at ground speeds no greater than 5 miles per hour. Performance may be
improved by reducing speed in areas of heavy weed infestation to provide adequate wiper saturation with
the herbicide solution. Better results may be obtained when two applications are made in opposite
directions.
Droplets, mist, foam or splatter of the herbicide solution settling onto desirable vegetation may result in
discoloration, stunting or destruction. Avoid leakage or dripping onto desirable vegetation. Keep wiping
surfaces clean. Be aware that on sloping ground the herbicide solution may migrate, causing dripping on
the lower end and drying of the wicks on the upper end of the wiper applicator.
Do not use wiper applicators when weeds are wet.
Mix only the amount of this product to be used during a 1-day period, as reduced product performance
may result from the use of solutions held in storage. Clean wiper parts immediately after using this
product by thoroughly flushing with water.
For Rope or Sponge Wick Applicators .,... Solutions ranging from 33 to 75 percent of this product in
water may be used.
For Panel Applicators and Pressure-feed Systems - Solutions ranging from 33 to 100 percent of this
product in water may be used.
When applied as directed, this product CONTROLS the following weeds:
Corn, volunteer
Panicum, Texas
Rye, common
Shattercane
Sicklepod
Spanish needles
Starbur, bristly
When applied as directed, this product SUPPRESSES the following weeds:
7.5 Injection Systems
Beggarweed, Florida
Bermudagrass
Dogbane, hemp
Dogfennel
Guineagrass
Johnsongrass
Milkweed
Nightshade, silverleaf
Pigweed, red root
Ragweed, common
Ragweed, giant
Smutgrass
Sunflower
Thistle, Canada
Thistle, musk
Vaseygrass
Velvetleaf
This product may be used in aerial or ground injection spray systems. It may be used as a liquid
concentrate or diluted prior to injecting into the spray stream. Do not mix this product with the undiluted
concentrate of other products when using injection systems unless specifically directed.
7.6 CDA Equipment
The rate of this product applied per acre by controlled droplet application (CDA) equipment must not be
less than the amount specified on this label when applied by conventional broadcast equipment. For
vehicle-mounted CDA equipment, apply 2 to 15 gallons of water per acre.
CDA equipment produces a spray pattern that is not easily visible. Extreme care must be exercised to
avoid spray or drift contacting the foliage or any other green tissue of desirable vegetation, as damage or
destruction is likely to result.
Master Label 524-454 Page 97 of 139 Submitted August 26, 2009

)
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
8.0 SITE AND USE INSTRUCTIONS
This product may be used in non-crop areas including airports, apartment complexes, commercial sites,
ditch banks, driveways, dry ditches, dry canals, fencerows, golf courses, greenhouses, industrial sites,
landscape areas, lumber yards, manufacturing sites, municipal sites, natural areas, office complexes,
ornamentals, parks, parking areas, pastures, petroleum tank farms and pumping installations, public
areas, railroads, rangeland, recreation areas, residential areas, rights-of-way, roadsides, schools,
shadehouses, sports complexes, storage areas, substations, turfgrass areas, utility sties, warehouse
areas and wildlife management areas.
This product may also be used in non-food crops sites such as Christmas tree farms, plant nurseries, and
sod or turf seed farms.
Unless otherwise specified, applications may be made to control any weeds listed in the "WEEDS
CONTROLLED" section of this label.
8.1 Cut Stump
Cut stump treatments may be made on any site listed on this label. This product will control many types
of woody brush and tree species. Apply this product using suitable equipment to ensure coverage of the
entire cambium. Cut trees or re-sprouts close to the soil surface. Apply a 50 to 1 ~O-percent solution of
this product to the freshly-cut surface immediately after cutting. Delays in application may result in
reduced performance. For best results, apply during periods of active growth and full leaf expansion.
DO NOT MAKE CUT STUMP APPLICATIONS WHEN THE ROOTS OF DESIRABLE WOODY BRUSH
OR TREES MAY BE GRAFTED TO THE ROOTS OF THE CUT STUMP. Some sprouts, stems, or trees
may share the same root system. Adjacent trees having a similar age, height and spacing may signal
shared roots. Whether grafted or shared, injury is likely to occur to non-treated stems/trees when one or
more trees sharing common roots are treated.
8.2 Forestry Site Preparation
This product may be used for the control or partial control of woody brush, trees and herbaceous weeds
in forestry in preparing or establishing wildlife openings within these sites and maintaining logging roads.
This product may be used in site preparation prior to planting any tree species, including Christmas trees,
eucalyptus, hybrid tree cultivars and silvicultural nursery sites.
Refer to the "WEEDS CONTROLLED" section of this label for specific application rates and instructions.
Use the higher rates of this product within the specified range for control or partial control of woody brush,
trees and hard-to-control perennial herbaceous weeds. For best results, apply to actively growing woody
brush and trees after full leaf expansion and before fall color and leaf drop. Increase rates within the
specified range for control of perennial herbaceous weeds any time after emergence and before
seedheads, flowers or berries appear.
Use the lower rates of this product within the specified range for control of annual herbaceous weeds and
actively growing perennial herbaceous weeds after seed heads, flowers or berries appear. Apply to the
foliage of actively growing annual herbaceous weeds any time after emergence.
This product has no herbicidal or residual activity in the soil.
Unless otherwise directed, do not apply this product as an over-the-top broadcast spray for forestry
conifer or hardwood release.
TANK MIXTURES: Tank mixtures of this product may be used to increase the spectrum of vegetation
controlled. When tank-mixing, read and carefully observe the label claims, cautionary statements and all
information on the labels of all products used. Use according to the most restrictive precautionary
statements for each product in the mixture.
Master Label 524-454 Page 98 of 139 Submitted August 26, 2009

) ')
/
\00 Ot \40
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
NOTE: For forestry site preparation, make sure the tank-mix product is approved for use prior to planting
the desired species. Observe planting interval restrictions.
This product may be used in a tank-mix with the following products for forestry site preparation.
Arsenal Applicators Concentrate
Chopper
Escort or Escort XP
Garlon 3A
Garlon 4A
Landmark XP
Oust or Oust XP
Westar
For control of herbaceous weeds, use the lower specified tank mixture rates. For control of dense stands
or tough-to-control woody brush and trees, use the higher application rates.
8.3 Use Areas and Industrial Sites
Weed Control, Trim-and-Edge, Bare Ground
This product may be used in non-crop and non-food areas. It may be applied with any application
equipment described in this label. This product may be used to trim-and-edge around objects in these
sites, for spot treatment of unwanted vegetation and to eliminate unwanted weeds growing in established
shrub beds or ornamental plantings. This product may be used prior to planting an area to ornamentals,
flowers, turfgrass (sad or seed), or prior to laying asphalt or beginning construction projects.
Repeated applications of this product may be used, as weeds emerge, to maintain bare ground.
TANK MIXTURES: This product may be tank-mixed with the following products, provided that the specific
product is labeled for application at the use site. Refer to the individual product labels for approved sites
and application rates.
2,4-0 1
Arsenal
atrazine 1
Barricade 65WG
Crossbow L
dicamba1
diuron1
Endurance
Escort
Escort XP
Gallery 75 OF
Garlon 4
Garlon 3A
Landmark MP
Goal2XL
Karmex OF
Krovar I OF
Landmark II MP
Milestone
Oust XP
Outrider
Pendulum WDG
Pendulum 3.3 EC
pendimethalin
1
Plateau
Poast
Landmark XP
Princep 4L
Princep
OF
Ronstar 50WP
Sahara
simazine 1
Surflan AS
Surflan WDG
Telar
Transline
Vanquish
Velpar OF
Velpar L
Certainty
Tank mixtures with products containing this single active ingredient may be made provided the specific
product is labeled for application at the use site
This product plus dicamba tank mixtures may not be applied by air in California.
When applied as a tank mixture for bare ground, this product provides control of the emerged annual
weeds and control or partial control of emerged perennial weeds, woody brush and trees.
For control or partial control of the following perennial weeds, apply 1 to 2 quarts of this product plus 2 to
4 ounces of Oust XP per acre.
Bahiagrass Johnsongrass
Master Label 524-454 Page 99 of 139 Submitted August 26, 2009

')
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
Berrnudag rass
Broomsedge
Dallisgrass
Dock, curly
Dogfennel
Fescue, tall
Chemical Mowing· Perennials
Poorjoe
Quackgrass
Vaseygrass
Vervain, blue
)
This product will suppress perennial grasses listed in this section to serve as a substitute for mowing.
Use 8 fluid ounces of this product per acre when treating tall fescue, fine fescue, orchardgrass,
quackgrass or reed canarygrass covers. Use 6 fluid ounces of this product per acre when treating
Kentucky bluegrass. Apply treatments in 10 to 40 gallons of spray solution per acre.
Use only in areas where some temporary injury or discoloration of perennial grasses can be tolerated.
Chemical Mowing· Annuals
For growth suppression of some annual grasses, such as annual ryegrass, wild barley and wild oats
growing in coarse turf on roadsides or other industrial areas, apply 4 to 5 fluid ounces of this product in 10
to 40 gallons of spray solution per acre. For best results, Apply when annual grasses are actively
growing and before the seed heads are in the boot stage of development. Treatments may cause injury to
the desired grasses.
8.4 Turfgrass
This product may be used to control or suppress many winter annual weeds and tall fescue for effective
release of dormant Bermudagrass and bahiagrass turf. Treat only when turf is dormant and prior to spring
green-up.
Apply 8 to 64 fluid ounces of this product per acre. Apply the labeled rates in 10 to 40 gallons of water per
acre. Use only in areas where bermudagrass or bahiagrass are desirable ground covers and where some
temporary injury or discoloration can be tolerated.
Treatments in excess of 16 fluid ounces per acre may result in injury or delayed green-up in highly
maintained areas, such as golf courses and lawns. DO NOT apply tank mixtures of this product plus
Oust XP in highly maintained turfgrass areas.
Actively Growing Bermudagrass
This product may be used to control or partially control many annual and perennial weeds for effective
release of actively growing bermudagrass. DO NOT apply more than 16 fluid ounces of this product per
acre in highly maintained turfgrass areas. DO NOT apply tank mixtures of this product plus Oust XP in
highly maintained turfgrass areas. Use only in areas where some temporary injury or discoloration can
be tolerated.
Turfgrass Renovation, Seed or Sod Production
This product controls most existing vegetation prior to renovating turfgrass areas or establishing turfgrass
grown for seed or sod. For maximum control of existing vegetation, delay planting or sodding to
determine if any re-growth from escaped underground plant parts occurs. Where repeat treatments are
necessary, sufficient re-growth must be attained prior to application. For warm-season grasses such as
bermudagrass, summer or fall applications provide the best control. Where existing vegetation is growing
under mowed turfgrass management, apply this product after omitting at least one regular mowing to
allow sufficient growth for good interception of the spray.
Desirable turfgrasses may be planted following the above procedures.
Master Label 524-454 Page 100 of 139 Submitted August 26, 2009

II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
Hand-held equipment may be used for spot treatment of unwanted vegetation growing in existing
turfgrass. Broadcast or hand-held equipment may be used to control sod remnants or other unwanted
vegetation after sod is harvested.
PRECAUTIONS, RESTRICTIONS: Do not disturb soil or underground plant parts before treatment. Delay
tillage or renovation techniques such as vertical mowing, coring or slicing for 7 days after application to
allow translocation into underground plant parts. If application rates total 3 quarts per acre or less, no
waiting period between treatment and feeding or livestock grazing is required. If the rate was greater
than 3 quarts per acre, remove domestic livestock before application and wait 8 weeks after application
before grazing or harvesting.
8.5 Habitat Management
Habitat Restoration and Management
This product may be used to control exotic and other undesirable vegetation in habitat management and
natural areas, including rangeland and wildlife refuges. Applications can be made to allow recovery of
native plant species, prior to planting desirable native species, and for similar broad-spectrum vegetation
control requirements. Spot treatments can be made to selectively remove unwanted plants for habitat
management and enhancement.
Wildlife Food Plots
This product may be used as a site preparation treatment prior to planting wildlife food plots. Any wildlife
food species may be planted after applying this product, or native species may be allowed to repopulate
the area. If tillage is needed to prepare a seedbed, wait 7 days after application before tillage to allow
translocation into underground plant parts.
8.6 Hollow Stem Injection
This product may be applied through hand-held injection devices that deliver the proper amount of this
product into targeted hollow-stem plants growing in any non-crop site specified on this label.
For control of the following hollow-stem plants, follow the use instructions below:
Castorbean, Ricinus communis
Inject 4 milliliters of this product per plant into the lower portion of the main stem.
Hemlock, Poison, Conium maculatum
Inject one leaf cane per plant 10 to 12 inches above the root crown with 5 milliliters of a 5-percent (by
volume) solution of this product.
Hogweed, Giant, Hercleum mantegazzianum
Inject one leaf cane per plant 12 inches above the root crown with 5 milliliters of a 5-percent (by volume)
solution of this product.
Horsetail, Field, Equisetum arvense
Inject one segment above the root crown with 0.5 milliliter of this product per stem. Use a low-volume
syringe capable of accurately delivering this amount of product.
Knotweed, Bohemian, Polygonum bohemicum
Inject 5 milliliters of this product per stem between the second and third internode.
Knotweed, Giant, Polygonum, sachalinense
Inject 5 milliliters of this product per stem between the second and third internode.
Knotweed, Japanese, Polygonum cuspidatum
Inject 5 milliliters of this product per stem between the second and third internode.
Reed, Giant, Arundo donax
Inject 6 milliliters of this product per stem between the second and third internode.
Master Label 524-454 Page 101 of 139 Submitted August 26, 2009

)
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
Thistle, Canada, Circisum arvense
Cut 8 to 9 of the tallest plants at bud stage in a clump with clippers. Use a cavity needle that is pushed
into the stem center and then slowly removed as 0.5 milliliter of this product per stem is injected into the
stem.
Note: The combined total for all treatments must not exceed 10.6 quarts of this product per acre. At 5
milliliters per stem, 7 quarts will treat approximately 1300 stems per acre.
8.7 Injection and Frill (Woody Brush and Trees)
This product may be used to control woody brush and trees by injection or frill applications. Apply this
product using suitable equipment that must penetrate into the living tissue. Apply the equivalent of 0.04
fluid ounce (1 milliliter) of this product for every 2 to 3 inches of trunk diameter at breast height (DB H).
This is best achieved by applying a 50 to 100-percent concentration of this product either to a continuous
frill around the tree or as cuts evenly spaced around the tree below all branches. As tree diameter
increases in size, better results are achieved by applying diluted material to a continuous frill or more
closely spaced cuttings. Avoid application techniques that allow runoff to occur from frilled or cut areas in
species that exude sap freely. In species such as this, make the frill or cuts at an oblique angle to
produce a cupping effect and use a 100-percent concentration of this product. For best results, apply
during periods of active growth and after full leaf expansion.
8.8 Non-food Tree, Shrub, and Vine Production Sites
This product may be used for weed control prior to planting or around established ornamentals, or any
woody tree, shrub, or vine species, including arborvitae, azalea, boxwood, crabapple, eucalyptus,
euonymus, fir, Douglas fir, jojoba, hollies, lilac, magnolia, maple, oak, poplar, privet, pine, spruce or yew,
growing in plant nurseries, on Christmas tree farms, or on other non-food tree production site.
UNLESS OTHERWISE DIRECTED, DO NOT USE THIS PRODUCT AS AN OVER-THE-TOP
BROADCAST SPRAY IN ORNAMENTALS AND CHRISTMAS TREES. Care must be taken to avoid
contact of spray, drift or mist with foliage or bark of desirable ornamental species.
This product may be used to control weeds growing in and around greenhouses and shadehouses.
Desirable vegetation must not be present during application and air circulation fans must be turned off
until after the application has dried.
TYPES OF APPLICATION: Site Preparation, Post-directed, Trim-and-edge, Wiper Application
Site Preparation
This product may be used prior to planting any tree, shrub, or vine, including Christmas tree species, in a
nursery or production setting.
Post-directed, Trim-and-Edge
This product may be used as a post-directed spray around established woody ornamental species, or to
trim and edge around trees, buildings, sidewalks, roads, potted plants and other objects in a production
setting.
Desirable plants may be protected from the spray solution by using shields or coverings made of
cardboard or other impermeable material.
Wiper Application
This product may be used through wick or other suitable wiper applicators to control or partially control
undesirable vegetation around established trees, shrubs, or vines. See the "SELECTIVE EQUIPMENT"
section of this label for further information about the proper use of wiper applicators.
8.9 Parks, Recreational and Residential Areas
Master Label 524-454 Page 102 of 139 Submitted August 26, 2009

) \
.'
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
All of the instructions in the "Use Areas and Industrial Sites" section may be made in park and
recreational areas.
This product may be used in parks, recreational and residential areas. It may be applied with any
application equipment described in this label. This product may be used to trim-and-edge around trees,
fences, paths, around buildings, sidewalks and other objects in these areas. This product may be used
for spot treatment of unwanted vegetation. This product may be used to eliminate unwanted weeds
growing in established shrub beds or ornamental plantings. This product may be used prior to planting an
area to ornamentals, flowers, turfgrass (sod or seed), or prior to laying asphalt or beginning construction
projects.
8.10 Railroads
All of the instructions in the "Use Areas and Industrial Sites" section may be may be made to railroads.
Bare Ground, Ballast and Shoulders, Crossings, Spot Treatment
This product may be used to maintain bare ground on railroad ballast and shoulders. Repeat applications
of this product may be used, as weeds emerge, to maintain bare ground. This product may be used to
control tall-growing weeds to improve line-of-sight at railroad crossings and reduce the need for mowing
along rights-of-way. For crossing applications, up to 80 gallons of spray solution per acre may be used.
TANK MIXTURES: This product may be tank mixed with the following products for ballast, shoulder, spot,
bare ground and crossing treatments, provided that the specific product is labeled for use on these sites.
Refer to the individual product labels for approved sites and application rates.
Arsenal Oust XP
atrazine' Outrider
dicamba' Sahara DG
diuron' simazine'
Escort Spike 80 DF
Escort XP Telar DF
Garlon 3A Transline
Garlon 4 Vanquish
Hyvar X Vel par DF
Hyvar X-L Velpar L
Krovar I DF 2,4-D'
Oust
1 Tank mixtures with products containing this single generic active ingredient may be made provided the
specific product is registered for this use.
Brush Control
This product may be used to control woody brush and trees on railroad rights-of-way. Apply 4 to 10
quarts of this product per acre as a broadcast spray, using boom-type or boomless nozzles. Up to 80
gallons of spray solution per acre may be used. Apply a 0.75- to 2-percent solution of this product when
using high-volume spray-to-wet applications. Apply a 5- to 10-percent solution of this product when using
low volume directed sprays for spot treatment.
TANK MIXTURES: This product may be mixed with the following products for ballast, shoulder, spot,
bare ground and crossing treatments, as well as for enhanced control of woody brush and trees, provided
that the specific product is labeled for use on these sites. Refer to the individual product labels for
approved sites and application rates.
Arsenal
dicamba 1
Escort
Master Label 524-454
atrazine 1
diuron 1
EscortXP
Page 103 of 139 Submitted August 26, 2009

)
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
Garlon 3A Garlon 4
Hyvar X Hyvar X-L
Krovar I DF Outrider
Oust XP simizine 1
Sahara DG Telar DF
Spike 80 DF Vanquish
Transline Velpar L
Velpar DF 2,4-D 1
1 Tank mixtures with products containing this single generic active ingredient may be made provided the
specific product is registered for this use.
Bermudagrass Release
This product may be used to control or partially control many annual and perennial weeds for effective
release of actively growing bermudagrass. Apply 1 to 3 pints of this product in up to 80 gallons of spray
solution per acre. Use the lower rate when treating annual weeds below 6 inches in height (or runner
length). Use the higher rate as weeds increase in size or as they approach flower or seed head formation.
These rates will also provide partial control of the following perennial species.
Bahiagrass
Bluestem, silver
Fescue, tall
Johnsongrass
Trumpetcreeper
Vaseygrass
This product may be tank-mixed with Oust XP. If tank-mixed, use no more than 1 to 3 pints of this product
with 1 to 2 ounces of Oust XP per acre. Use the lower rates of each product to control annual weeds less
than 6 inches in height (or runner length) that are listed in this label and the Oust XP label. Use the higher
rates as annual weeds increase in size and approach the flower or seed head stages. These rates will
also provide partial control of the following perennial weeds.
Bahiagrass Fescue, tall
Blackberry Johnsongrass
Bluestem, silver Poorjoe
Broomsedge Raspberry
Dallisgrass Trumpetcreeper
Dewberry Vaseygrass
Dock, curly Vervain, blue
Dogfennel
Use only on well-established bermudagrass. Bermudagrass injury may result from the treatment, but re
growth will occur under moist conditions. Make only one application per growing season, as severe
bermudagrass injury may occur with repeated application.
8.11 Roadsides
All of the applications in the "Use Areas and Industrial Sites" section may be made along roadsides.
Shoulder Treatments
This product may be used on road shoulders. It may be applied with boom sprayers, shielded boom
sprayers, high-volume off-center nozzles, hand-held equipment, and similar equipment.
Guardrails, Other Obstacles to Mowing
This product may be used to control weeds growing under guardrails and around signposts and other
objects along the roadside.
Spot Treatment
Master Label 524-454 Page 104 of 139 Submitted August 26, 2009

) )
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
This product may be used as a spot treatment to control unwanted vegetation growing along roadsides.
TANK MIXTURES: This product may be tank-mixed with the following products for shoulder, guardrail,
spot and bare ground treatments, provided that the specific product used is labeled for use on these
sites. Refer to the individual product labels for approved sites and application rates.
atrazine1
Clarity
Crossbow L
dicamba1
diuron1
Endurance
Escort
Escort XP
Gallery 75DF
Krovar I OF
Landmark II MP
Landmark MP
Landmark XP
Oust XP
Outrider
Pendulum 3.3 EC
Pendulum WDG
Plateau
Princep OF
Princep 4L
Ronstar 50WP
Sahara
simazine
1
Surflan
Telar
Vanquish
2,4-0 1
1 Tank mixtures with products containing this single generic active ingredient may be made provided the
specific product is registered for this use.
Release of Bermudagrass or Bahiagrass
Dormant Applications
This product may be used to control or partially control many winter annual weeds and tall fescue for
effective release of dormant bermudagrass or bahiagrass. Treat only when turf is dormant and prior to
spring green-up. This product may also be tank-mixed with Outrider or Oust XP for residual control. Tank
mixtures of this product with Oust or Oust XP may delay green-up.
For best results on winter annuals, treat when plants are in an early growth stage (below 6 inches in
height) after most have germinated. For best results on tall fescue, treat when fescue is at or beyond the
4- to 6-leaf stage.
Apply 8 to 64 fluid ounces of this product in a tank mix with 0.75 to 1.3 ounces of Outrider herbicide per
acre. Read and follow all label directions for Outrider herbicide.
Apply 8 to 64 fluid ounces of this product per acre alone or in a tank mixture with 0.25 to 1 ounce per acre
of Oust XP in 10 to 40 gallons of water per acre. Use only in areas where bermudagrass or bahiagrass
are desirable ground covers and where some temporary injury or discoloration can be tolerated. To avoid
delays in green-up and minimize injury, add no more than 1 ounce of Oust XP per acre on bermudagrass
and no more than 0.5 ounce of Oust XP per acre on bahiagrass and avoid treatments when these
grasses are in a semi-dormant condition.
Actively Growing Bermudagrass
This product may be used to control or partially control many annual and perennial weeds for effective
release of actively growing bermudagrass. Apply 1 to 3 pints of this product in 10 to 40 gallons of water
per acre. Use the lower rate when treating annual weeds below 6 inches in height (or runner length). Use
the higher rate as weeds increase in size or as they approach flower or seedhead formation. These rates
will also provide partial control of the following perennial species.
Master Label 524-454
Bahiagrass
Bluestem, silver
Fescue, tall
Johnsongrass
Trumpetcreeper
Vaseygrass
Page 105 of 139 Submitted August 26, 2009

)
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
This product may be tank-mixed with Outrider herbicide for control or partial control of Johnsongrass and
other weeds listed on the Outrider label. Use 9 to 32 fluid ounces of this product with 0.75 to 1.3 ounces
of Outrider per acre. Use the higher rates of both products for control of perennial weeds or annual
weeds greater than 6 inches in height.
This product may be tank-mixed with Oust XP. If tank-mixed, use no more than 1 to 2 pints of this product
with 1 to 2 ounces of Oust XP per acre. Use the lower rates of each product to control annual weeds less
than 6 inches in height (or runner length) that are listed in this label and the Oust XP label. Use the higher
rates as annual weeds increase in size and approach the flower or seed head stages. These rates will
also provide partial control of the following perennial weeds.
Bahiagrass Fescue, tall
Bluestem, silver Johnsongrass
Broomsedge Poorjoe
Dallisgrass Trumpetcreeper
Dock, curly Vaseygrass
Dogfennel Vervain, blue
Use only on well-established bermudagrass. Bermudagrass injury may result from the treatment, but re
growth will occur under moist conditions. Make only one application of this tank-mix per growing season,
as severe bermudagrass injury may occur with repeated application.
Actively Growing Bahiagrass
For suppression of vegetative growth and seed head inhibition of bahiagrass for approximately 45 days,
apply 6 fluid ounces of this product in 10 to 40 gallons of water per acre. Apply 1 to 2 weeks after full
green-up or after mowing to a uniform height of 3 to 4 inches. This application must be made prior to
seed head emergence.
For suppression up to 120 days, apply 4 fluid ounces of this product per acre, followed by an application
of 2 to 4 fluid ounces per acre about 45 days later. Make no more than 2 applications per year.
This product may be used for control or partial control of Johnsongrass and other weeds listed on the
Outrider herbicide label. Use 6 fluid ounces of this product with 0.75 to 2 ounces of Outrider per acre.
Use the higher rates for control of perennial weeds or annual weeds greater than 6 inches in height. Use
only on well-established bahiagrass.
A tank mixture of this product plus Oust XP may be used. Apply 6 fluid ounces of this product plus 0.25
ounce of Oust XP per acre 1 to 2 weeks following an initial spring mowing. Make only one application per
year.
8.12 Rangelands
This product will control or suppress many annual weeds growing in perennial cool and warm-season
grass rangelands, pastures, and industrial sites. Preventing weed seed production is critical to the
successful control of annual grassy weeds invading these perennial grass sites. Follow-up applications in
sequential years can eliminate most of the viable seeds. Delay grazing in the treated area to allow
desirable perennials to grow, flower and re-seed the area.
Bromus: This product may be used to control or suppress downy brome (Bromus tectorum), Japanese
brome (Bromus japonicus), soft chess (Bromus mollis) , cheatgrass (Bromus secalinus), cereal rye and
jointed goatgrass found in rangelands pastures and industrial sites. Apply 8 to 16 fluid ounces of this
product per acre on a broadcast basis.
For best results, allow treatment to coincide with early seed head emergence of the most mature plants.
Delaying the application until this growth stage will maximize the emergence of other weedy grass
flushes. Make applications to the same site each year until seed banks are depleted and the desirable
perennial grasses can become re-established on the site.
- Master Label 524-454 Page 106 of 139 Submitted August 26. 2009

)
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
Medusahead: To control or suppress medusahead, apply 16 fluid ounces of this product per acre at the
3-leaf stage when plants are actively growing. Delaying applications beyond this stage will result in
reduced or unacceptable control. Repeat applications in subsequent years may be necessary to eliminate
the seedbank before re-establishing desirable perennial grasses. Applications may be made in the fall or
spring.
Applications may be made using ground or aerial equipment. Aerial applications for these uses may be
made using fixed wing or helicopter equipment. For aerial applications, apply in 2 to 10 gallons of water
per acre. For applications using ground equipment, apply in 10 to 20 gallons of water per acre.
Spot Treatment, Wiper Application
This product may be applied in rangeland, pastures or industrial sties as a spot treatment, or over the top
of desirable grasses using wiper applicators to control tall weeds. Applications may be repeated in the
same area at 30-day intervals.
For spot treatments or wiper application methods using rates of 3 quarts of this product per acre or less,
the entire site or any portion of it may be treated. When spot treatments or wiper applications are made
using rates above 3 quarts of this product per acres, no more than 10 percent of the total site may be
treated at ay one time. To achieve maximum performance, remove domestic livestock before application
and wait 7 days after application before grazing livestock or harvesting for feed.
8.13 Utility Sites
In utilities, this product may be used along electrical power, pipeline and telephone rights-of-way, and in
other sites associated with these rights-of-way, such as substations, roadsides, railroads or similar rights
of-way that run in conjunction with utilities.
This product may be used in utility sties and substations for bare ground, trim-and-edge around objects,
spot treatment of unwanted vegetation and to eliminate unwanted weeds growing in established shrub
beds or ornamental plantings. This product may be used prior to planting a utility site to ornamentals,
flowers, turfgrass (sod or seed), or beginning construction projects.
Repeated applications of this product may be used, as weeds emerge, to maintain bare ground.
This product may also be used in preparing or establishing wildlife openings within these sites,
maintaining access roads and for side trimming along utility rights-of-way.
For control of herbaceous weeds, use the lower tank mixture rates. For control of dense stands or tough
to-control woody brush and trees, use the higher rates.
TANK MIXTURES: This product may be tank-mixed with the following products for use on utility sites,
provided that the specific product used is labeled for use on these sites. Refer to the individual product
labels for approved sites and application rates.
Master Label 524-454
2,4-0 1
Arsenal
atrazine1
Barricade 65WG
dicamba1
diuron1
Endurance
Escort
Escort XP
Garlon 3A2
Garlon 43
Krenite
Krovar I OF
Outrider
pendimethalin 1
Plateau
Ronstar 50WP
Sahara
simazine1
Surflan AS
Surflan WDG
Telar OF
Transline
Vanquish
Velpar OF
Velpar L
Page 107 of 139 Submitted August 26, 2009

II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
Oust
Oust XP
1 Tank mixtures with products containing this single generic active ingredient may be made provided the
specific product is registered for this use.
2 Ensure that Garlon 3A is thoroughly mixed with water according to label directions before adding this
product. Have spray mixture agitating at the time this product is added to avoid spray incompatibility
problems.
3 For side trimming treatments, use this product alone or in a tank mixture with Garlon 4.
8.14 Grass Seed or Sod Production
This product may be used in grass seed and sod production for preplant, at-planting, preemergence,
removal of established stands, renovation, site preparation, shielded spraying, wiper application, spot
treatment, and creating rows in annual ryegrass.
Preplant, Preemergence, At·Planting, Removal of Established Stands, Renovation, Site
Preparation
This product controls most existing vegetation for purposes of renovating turf or forage grass seed areas
or for establishing turfgrass grown for sod. It may also be used to destroy remaining undesired grass
vegetation when production fields are converted to alternate species or crops. Make applications before,
during, or after planting, or for renovation purposes. For maximum control of existing vegetation, delay
planting to determine if any re-growth from escaped underground plant parts occurs. Where existing
vegetation is growing under mowed turfgrass management, apply this product after omitting at least one
regular mowing to allow sufficient growth for good interception of the herbicide spray. Where repeat
treatments are necessary, sufficient re-growth must be attained prior to application. For warm-season
grasses, such as bermudagrass, summer or fall applications provide best control. Broadcast equipment
may be used to control sod remnants or other unwanted vegetation after sod is harvested. Application
rates up to 5 quarts per acre may be used to totally remove established stands of tough to kill grass
species.
Do not disturb soil or underground plant parts before treatment. Delay tillage or renovation techniques
such as vertical mowing, coring or slicing for 7 days after application to allow proper translocation into
underground plant parts. If application rates total 3 quarts per acre or less, no waiting period between
treatment and feeding or livestock grazing is required. If the rate is greater than 3 quarts per acre, remove
domestic livestock before application and wait 8 weeks after application before grazing or harvesting.
Shielded Sprayers
Apply 1 to 3 quarts of this product in 10 to 20 gallons of water per acre to control weeds between grass
seed rows. Uniform planting in straight rows aids in shielded sprayer applications. Best results are
obtained when the grass seed crop is small enough to easily pass by the protective shields.
Contact of this product in any manner with desirable vegetation may result in discoloration, stunting or
destruction. Such damage shall be the sole responsibility of the applicator.
Wiper Application
This product may be applied over the top of desirable grasses using wiper applicators for the control of
tall weeds.
Contact of this product in any manner with desirable vegetation may result in discoloration, stunting or
destruction. Such damage shall be the sole responsibility of the applicator.
Spot Treatment
Master Label 524-454 Page 108 of 139 Submitted August 26, 2009

) \\0 ot\40
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
Apply a 1.5-percent solution of this product using hand-held spray equipment to control weeds within
established vegetation prior to heading of grasses grown for seed. Hand-held equipment may be used to
control sod remnants or other unwanted vegetation after sod is harvested.
The crop sprayed in the treated area will be killed. Take care not to spray or allow spray to drift outside
the target area in order to avoid unwanted grass injury or destruction.
Creating Rows in Annual Ryegrass
Apply 1 to 2 pints of this product per acre. Best results are obtained when applications are made before
the ryegrass reaches 6 inches in height. Use the higher rate within this specified range when ryegrass is
greater than 6 inches in height.
Set nozzle heights to allow the establishment of the desired row spacing. Use of low-pressure nozzles,
or drop nozzles designed to target the application over a narrow band provide the best results.
Take care not to spray or allow spray to drift outside target area in order to avoid unwanted grass
destruction.
Grower assumes all responsibility for crop losses resulting from misapplication of this product.
8.15 Pastures
This product may be applied to any pasture grass (other than food crops in the Gramineae family),
including bahiagrass, bermudagrass, bluegrass, brome, fescue, guineagrass, kikuyugrass, orchardgrass,
pangola grass, ryegrass, timothy, and wheatgrass. Application can be made as a spot treatment, wiper
application, preplant, preemergence, pasture renovation, or postemergent broadcast.
Preplant, Preemergence, Pasture Renovation
This product may be applied for weed control prior to planting or emergence of forage grasses. This
product may also be applied to control perennial pasture species listed on this label prior to replanting.
If application rates total 3 quarts per acre or less, no waiting period between treatment and feeding or
livestock grazing is required. If the rate is greater than 3 quarts per acre, remove domestic livestock
before application and wait 8 weeks after application before grazing or harvesting.
Spot Treatment, Wiper Application
This product may be applied in pastures as a spot treatment, or over the top of desirable grasses using
wiper applicators to control tall weeds. Applications may be repeated in the same area at 30-day
intervals.
For spot treatments or wiper application methods using rates of 3 quarts of this product per acre or less,
the entire field or any portion of it may be treated. When spot treatments or wiper application are made
using rates above 3 quarts of this product per acre, no more than 10 percent of the total pasture may be
treated at anyone time. To achieve maximum performance, remove domestic livestock before application
and wait 7 days after application before grazing livestock or harvesting for feed.
Postemergent Weed Control (Broadcast Treatments)
This product may be applied to pastures to suppress competitive growth and seed production of annual
weeds and undesirable vegetation in pastures. For selective applications with broadcast spray
equipment, apply 12 to 16 fluid ounces of this product per acre in early spring before desirable perennial
grasses break dormancy and initiate green growth. Late fall applications can be made after desirable
perennial grasses have reached dormancy.
Some stunting of perennial grasses will occur if broadcast applications are made when plants are not
dormant. Use of higher application rates will cause stand reductions. No waiting period is required
between application and grazing or harvesting for feed. Do not apply more than 3 quarts of this product
per acre per year onto pasture grasses except for renovation uses as described previously in this section.
Master Label 524-454 Page 109 of 139 Submitted August 26, 2009

) ,\ \ Ot \40
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
Weed Control in Dormant Pastures
This product may be applied to dormant pastures to suppress competitive growth and seed production of
annual weeds and other undesirable vegetation. For selective weed control, apply 12 to 16 fluid ounces
of this product per acre using broadcast spray equipment in early spring before desirable perennial
grasses break dormancy and initiate green growth. Late fall applications can be made after desirable
perennial grasses have reached dormancy.
Some stunting of perennial grasses will occur if broadcast applications are made when plants are not
dormant. Use of higher application rates will cause stand reductions. No waiting period between
application and grazing or harvesting for feed is required. Do not apply more than 3 quarts of this product
per acre per year onto pasture grasses except for renovation purposes.
9.0 WEEDS CONTROLLED
Always use the higher rate of this product per acre within the specified range when weed growth is heavy
or dense or weeds are growing in an undisturbed (non-cultivated) area.
Reduced results may occur when treating weeds heavily covered with dust. For weeds that have been
mowed, grazed or cut, allow re-growth to occur prior to treatment.
Refer to the following label sections for application rates of this product for the control of annual and
perennial weeds and woody brush and trees. For difficult to control perennial weeds and woody brush
and trees, where plants are growing under stressed conditions, or where infestations are dense, this
product may be used at 5 to 10 quarts per acre for enhanced results.
9.1 Annual Weeds
Use 1 quart per acre if weeds are less than 6 inches in height or runner length and 1.5 quarts to 4 quarts
per acre if weeds are over 6 inches in height or runner length or when weeds are growing under stressed
conditions. Use the higher rate for tough-to-control species regardless of the weed size at application.
Treat tough-to-control weeds early when they are relatively small. This product may be tank mixed
provided the tank-mix product is labeled for use on the target site. Refer to the individual product labels
for approved sites and application rates.
For spray-to-wet applications, apply a 0.5-percent solution of this product to weeds less than 6 inches in
height or runner length. For annual weeds over 6 inches tall, or for smaller weeds growing under stressed
conditions, use a 1- to 2-percent solution. Use the higher rate for tough-to-control species or for weeds
over 24 inches tall. Apply prior to seed head formation in grass or bud formation in broad leaf weeds.
For low volume directed spray applications, use a 4- to 7-percent solution of this product. Ensure that
spray coverage is uniform with at least 50 percent of the foliage contacted. Coverage of the top one half
of the plant is important for best results. To ensure adequate spray coverage, spray both sides of large or
tall weeds when foliage is thick and dense or where there are multiple spouts.
WEED SPECIES
Anoda, spurred
Barley
Barnyardgrass
Bassia, five hook
Bittercress
Black nightshade
Bluegrass, annual
Bluegrass, bulbous
Brome, downy
Brome, Japanese
Browntop panicum
Buttercup
Master Label 524-454
Lamb's-quarters
Little barley
London rocket
Mayweed
Medusahead
Morningglory (Ipomoea spp)
Mustard, blue
Mustard, tansy
Mustard, tumble
Mustard, wild
Oats
Pigweed
Page 110 of 139 Submitted August 26, 2009

)
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
Carolina foxtail
Carolina geranium
Castor bean
Cheatgrass
Cheeseweed (Malva parviflora)
Chervil
Chickweed
Cocklebur
Copperleaf, hophornbeam
Corn
Corn speedwell
Crabgrass
Dwarfdandelion
Eastern mannagrass
Eclipta
Fall panicum
Falsedandelion
Falseflax, smallseed
Fiddleneck
Field pennycress
Filaree
Fleabane, annual
Fleabane, hairy (Conyza bonariensis)
Fleabane, rough
Florida pusley
Foxtail
Goatgrass, jointed
Goosegrass
Grain sorghum (milo)
Groundsel, common
Hemp sesbania
Henbit
Horseweed/Marestail (Conyza canadensis)
Itchgrass
Johnsongrass, seedling
Junglerice
Knotweed
Kochia
9.2 Perennial Weeds
Plains/Tickseed coreopsis
Prickly lettuce
Puncturevine
Purslane, common
Ragweed, common
Ragweed, giant
Red rice
Russian thistle
Rye
Ryegrass
Sand bur, field
Shattercane
Shepherd's-purse
Sicklepod
Signalgrass, broad leaf
Smartweed, ladysthumb
Smartweed, Pennsylvania
Sowthistle, annual
Spanishneedles
Speedwell, purslane
Sprangletop
Spurge, annual
Spurge, prostrate
Spurge, spotted
Spurry, umbrella
Starthistle, yellow
Stinkgrass
Sunflower
Teaweedl Prickly sida
Texas panicum
Velvetleaf
Virginia copperleaf
Virginia pepperweed
Wheat
Wild oats
Witchgrass
Woolly cupgrass
Yellow rocket
Best results are obtained when perennial weeds are treated after they reach the reproductive stage of
growth (seedhead initiation in grasses and bud formation in broadleaves). For non-flowering plants, best
results are obtained when the plants reach a mature stage of growth. In many situations, treatments are
required prior to these growth stages. Under these conditions, use the higher application rate within the
range.
Ensure thorough coverage when using spray-to-wet treatments with hand-held equipment. For best
results, use a 1.5-percent solution on harder-to-control perennials such as bermudagrass, dock, field
bindweed, hemp dogbane, milkweed and Canada thistle.
For low volume directed spray applications, use a 5- to 10-percent solution of this product. Ensure that
spray coverage is uniform with at least 50 percent of the foliage contacted. Coverage of the top one half
of the plant is important for best results. To ensure adequate spray coverage, spray both sides of large or
tall weeds when foliage is thick and dense or where there are multiple sprouts.
Master Label 524-454 Page 111 of 139 Submitted August 26, 2009

)
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
Allow 7 or more days after application before tillage.
Weed Species
Alfalfa*
Alligatorweed*
Anise (fennel)
Bahiagrass
Beachgrass, European (Ammophila arenaria)
Bentgrass*
Bermudagrass
Bermudagrass, water (knotgrass)
Bindweed, field
Bluegrass, Kentucky
Blueweed, Texas
Brackenfern
Bromegrass, smooth
Bursage, woolly-leaf
Canarygrass, reed
Cattail
Clover;
red, white
Cogongrass
Dallisgrass
Dandelion
Dock, curly
Dogbane, hemp
Fescue (except tall)
Fescue, tall
German ivy
Guineagrass
Horsenettle
Horseradish
Iceplant
Jerusalem artichoke
Johnsongrass
Kikuyugrass
Knapweed
Lantana
Lespedeza
Milkweed, common
Muhly, wirestem
Mullein, common
Napiergrass
Nightshade, silverleaf
Nutsedge; purple, yellow
Orchardgrass
Pampasgrass
Paragrass
Pepperweed, perennial
Phragmites*
Poison hemlock
Quackgrass
Rate
(QT/A)
1
4
2-4
3-5
1.5
5
1.5
4-5
2
4-5
3-4
2
2-3
3-5
3-5
3-5
3-5
3-5
3-5
4
3-5
1-3
2-4
3
3-5
4
2
3-5
2-3
2-3
4
3-5
3
2
3-5
3-5
2
3
2
3-5
3-5
4
3-5
2-4
2-3
Master Label 524-454 Page 112 of 139
) \\'0ot \40
Hand-Held
% Solution
2
1.5
1-2
2
5
2
2
2
2
2
2
1 - 1.5
2
2
2
2
2
2
2
2
2
2
2
2
1-2
1
2
2
1.5-2
2
1
2
2
1 -1.25
2
2
2
2
2
2
1-2
2
1.5- 2
2
2
1-2
1-2
2
Submitted August 26. 2009

)
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
Redvine*
Reed, giant
Ryegrass, perennial
Smartweed, swamp
Spurge, leafy*
Sweet potato, wild*
Thistle, artichoke
Thistle, Canada
Timothy
T orpedograss *
Trumpetcreeper*
Vaseygrass
Velvetgrass
Wheatgrass, western
* Partial control
9.3 Woody Brush and Trees
2
4-S
2-3
3-S
2-3
2-3
2-3
4-S
2-3
3-S
3-S
2-3
2
2
1
2
2
2
1-2
2
2
2
2
2
2
2
Apply this product after full leaf expansion, unless otherwise directed on this label, or in separate
supplemental labeling or Fact Sheets published for this product. Use the higher rate for larger plants
and/or dense areas of growth. On vines, use the higher rate for plants that have reached the woody stage
of growth. Best results are obtained when application is made in late summer or fall after fruit formation.
In arid areas, best results are obtained when applications are made in the spring to early summer when
brush species are at high moisture content and are flowering.
For best results when using hand-held equipment, use a 1.S-percent solution on harder-to-control woody
brush and trees.
For low volume directed-spray applications, apply a S to 1 a-percent solution of this product. Ensure that
spray coverage is uniform with at least SO-percent of the foliage contacted. Coverage of the top one-half
of the plant is important for best results. To ensure adequate spray coverage, spray both sides of large or
tall woody brush and trees, when foliage is thick and dense, or where there are multiple spouts.
Symptoms may not appear prior to frost or senescence with fall treatments.
Allow 7 or more days after application before tillage, mowing or removal. Repeat treatments may be
necessary to control plants regenerating from underground parts or seed. Some autumn colors on
undesirable deciduous species are acceptable provided no major leaf drop has occurred. Reduced
performance may result if fall treatments are made following a frost.
WEED SPECIES
Alder
Ash*
Aspen, quaking
Bearclover (Bearmat)*
Beech*
Birch
Blackberry
Blackgum
Bracken
Broom; French, Scotch
Buckwheat, California*
Master Label 524-454
Broadcast
Rate
(QT/A)
3-4
2-S
2-3
2-S
2-S
2
3-4
2-S
2-S
2-S
2-4
Page 113 of 139
Hand-Held
Spray-to-Wet
% Solution
1 -1.S
1-2
1 -1.S
1-2
1-2
1
1 - 1.S
1-2
1-2
1.S- 2
1-2
Submitted August 26, 2009

) \\~ Of l~O
II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
Cascara* 2-5 1-2
Catsdaw* 1 - 1.5
Ceanothus* 2-5 1-2
Chamise* 2-5 1
Cherry; bitter, black, pin 2-3 1 -1.5
Coyote brush 3-4 1.5 - 2
Deerweed 2-5 1
Dogwood* 2-5 1-2
Elderberry 2 1
Elm* 2-5 1-2
Eucalyptus 2
Gorse* 2-5 1-2
Hasardia* 2-4 1-2
Hawthorn 2-3 1 - 1.5
Hazel 2 1
Hickory* 2-5 1-2
Honeysuckle 3-4 1 - 1.5
Hornbeam, American* 2-5 1-2
Kudzu 4 2
Locust, black* 2-4 1-2
Madrone resprouts* 2
Manzanita* 2-5 1-2
Maple, red 2-4 1 - 1.5
Maple, sugar 1 -1.5
Monkey flower* 2-4 1-2
Oak; black, white* 2-4 1-2
Oak, post 3-4 1 - 1.5
Oak; northern, pin 2-4 1 - 1.5
Oak, Scrub* 2-4 1 -1.5
Oak; southern red 2-3 1 - 1.5
Peppertree, Brazilian (Florida holly)* 2-5 1-2
Persimmon* 2-5 1-2
Pine 2-5 1-2
Poison ivy 4-5 2
Poison oak 4-5 2
Poplar, yellow* 2-5 1-2
Redbud, eastern 2-5 1-2
Rose, multiflora 2 1
Russian olive* 2-5 1-2
Sage, black 2-4 1
Sage, white* 2-4 1-2
Sage brush, California 2-4 1
Salmonberry 2 1
Saltcedar* 2-5 1-2
Sassafras* 2-5 1-2
Sourwood* 2-5 1-2
Sumac; laurel, poison, smooth, sugarbush,winged* 2-4 1-2
Sweetgum 2-3 1 - 1.5
Swordfern* 2-5 1-2
Tallowtree, Chinese 1
Tan oak resprouts* 2
Master Label 524-454 Page 114 of 139 Submitted August 26, 2009

II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
Thimbleberry
Tobacco, tree*
Toyon*
Trumpetcreeper
Vine maple*
Virginia creeper
Waxmyrtle, southern*
Willow
Yerbasenta*
* Partial control
10.0 LIMIT OF WARRANTY AND LIABILITY
2
2-4
2-3
2-5
2-5
2-5
3
1
1-2
2
1 - 1.5
1-2
1-2
1-2
1
2
\\~ Ot \~O
[INSERT COM PANTY NAME] warrants that this product conforms to the chemical description on the
label and is reasonably fit for the purposes set forth in the Complete Directions for Use label booklet
("Directions") when used in accordance with those Directions under the conditions described therein. TO
THE EXTENT CONSISTENT WITH APPLICABLE LAW, NO OTHER EXPRESS WARRANTY OR
IMPLIED WARRANTY OF FITNESS FOR PARTICULAR PURPOSE OR MERCHANTABILITY IS MADE.
This warranty is also subject to the conditions and limitations stated herein.
Buyer and all users shall promptly notify this Company of any claims whether based in contract,
negligence, strict liability, other tort or otherwise.
To the extent consistent with applicable law, buyer and all users are responsible for all loss or damage
from use or handling which results from conditions beyond the control of this Company, including, but not
limited to, incompatibility with products other than those set forth in the Directions, application to or
contact with desirable vegetation, failure of this product to control weed biotypes which develop
resistance to glyphosate, unusual weather, weather conditions which are outside the range considered
normal at the application site and for the time period when the product is applied, as well as weather
conditions which are outside the application ranges set forth in the Directions, application in any manner
not explicitly set forth in the Directions, moisture conditions outside the moisture range specified in the
Directions, or the presence of products other than those set forth in the Directions in or on the soil, crop
or treated vegetation.
This Company does not warrant any product reformulated or repackaged from this product except in
accordance with this Company's stewardship requirements and with express written permission from this
Company.
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER
OR BUYER, AND THE LIMIT OF THE LIABILITY OF THIS COMPANY OR ANY OTHER SELLER FOR
ANY AND ALL LOSSES, INJURIES OR DAMAGES RESULTING FROM THE USE OR HANDLING OF
THIS PRODUCT (INCLUDING CLAIMS BASED IN CONTRACT, NEGLIGENCE, STRICT LIABILITY,
OTHER TORT OR OTHERWISE) SHALL BE THE PURCHASE PRICE PAID BY THE USER OR BUYER
FOR THE QUANTITY OF THIS PRODUCT INVOLVED, OR, AT THE ELECTION OF THIS COMPANY
OR ANY OTHER SELLER, THE REPLACEMENT OF SUCH QUANTITY, OR, IF NOT ACQUIRED BY
PURCHASE, REPLACEMENT OF SUCH QUANTITY. TO THE FULLEST EXTENT PERMITTED BY
LAW, IN NO EVENT SHALL THIS COMPANY OR ANY OTHER SELLER BE LIABLE FOR ANY
INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES.
Upon opening and using this product, buyer and all users are deemed to have accepted the terms of this
LIMIT OF WARRANTY AND LIABILITY which may not be varied by any verbal or written agreement. If
terms are not acceptable, return at once unopened.
[INSERT BRAND NAME], Manage, Outrider, Roundup Ready, Monsanto and Vine symbol are
trademarks of Monsanto Technology LLC.
Other trademarks are the property of their respective owners.
Master Label 524-454 Page 115 of 139 Submitted August 26, 2009

II. MAIN LABEL FOR INDUSTRIAL, TURF & ORNAMENTAL USES
EPA Reg. No. 524-454
© [DATE]
[INSERT COMPANY NAME]
[INSERT COMPANY ADDRESS]
Master Label 524-454 Page 116 of 139
) \\1 of \40
Submitted August 26, 2009

) )
MARKED COpy
1111. SUPPLEMENTAL LABELING
Table of Contents
Approval
Name Date
A USE IN DORMANT ALFALFA 17 -Aug-2009
B CONTROL OF ANNUAL WEEDS IN COASTAL BERMUDAGRASS PASTURES 17 -Aug-2009
PRIOR TO SPRING GROWTH OR IMMEDIATELY AFTER FIRST CUTTING
C DISTRIBUTION AND USE ONLY WITHIN SOUTH DAKOTA, FOR NON- 17 -Aug-2009
SELECTIVE CONTROL OF LISTED ANNUAL WEEDS IN SMALL GRAIN
CROPPING SYSTEMS
D CONTROL AND MANAGEMENT OF GLYPHOSATE-RESISTANT HORSEWEED 17 -Aug-2009
(MARESTAIL, Conyza canadensis) IN CROP AND NON-CROP AREAS
E LIMITATIONS ON AERIAL APPLICATION IN CALIFORNIA ONLY, INCLUDING 17 -Aug-2009
FRESNO COUNTY, CALIFORNIA
F AERIAL APPLICATION IN ARKANSAS ONLY 17 -Aug-2009
G CONTROL OF BARNYARDGRASS (ECHINOCHLOA CRUS-GALLI) IN RICE 17 -Aug-2009
USING RENOVATION TREATMENT IN CALIFORNIA ONLY
H USE IN ROUNDUP READY ALFALFA SEED PRODUCTION 17 -Aug-2009
I APPLICATION TO ROUNDUP READY FLEX COTTON IN THE STATE OF 17 -Aug-2009
ARIZONA ONL Y
J BROADCAST APPLICATION IN CHRISTMAS TREE PLANTATIONS 17 -Aug-2009
K SELECTIVE WEED CONTROL ON [INSERT BRAND NAME]-TOLERANT PURE 17 -Aug-2009
GOLD® TALL FESCUE AND AURORA GOLD® FINE FESCUE SELECTIONS
L TANK MIXTURES FOR TOUGH TO CONTROL WEEDS 17 -Aug-2009
M GROUND AND AERIAL APPLICATION TO BRUSH AND CHAPARRAL IN 17 -Aug-2009
CALIFORNIA ONLY
N CONIFER RELEASE 17 -Aug-2009
0 CONTROL AND MANAGEMENT OF GLYPHOSATE-RESISTANT AMARANTH US 17 -Aug-2009
spp.IN CORN, COTTON, AND SOYBEAN
P CONTROL AND MANAGEMENT OF GLYPHOSATE-RESISTANT RYEGRASS 17 -Aug-2009
Q CONTROL AND MANAGEMENT OF GLYPHOSATE-RESISTANT COMMON AND 17 -Aug-2009
GIANT RAGWEED (Ambrosia spp.) IN CORN, COTTON AND SOYBEAN
R CONTROL AND MANAGEMENT OF GL YPHOSATE-RESISTANT 17 -Aug-2009
JOHNSONGRASS IN CORN, COTTON AND SOYBEAN
S FOLIAR AND BROADCAST TREATMENT OF JAPANESE KNOTWEED AND 17 -Aug-2009
ORIENTAL BITTERSWEET
* Approval date corresponds to latest acceptance date of the Master Label for EPA Reg. No. 524-454
Master Label 524-454 Page 117 of 139 Submitted August 26, 2009

III. SUPPLEMENTAL LABELING
I SUPPLEMENTAL LABELING TEMPLATE
SUPPLEMENTAL LABELING
READ THE ENTIRE LABEL FOR [INSERT BRAND NAME] BEFORE PROCEEDING WITH THE USE
DIRECTIONS CONTAINED IN THIS SUPPLEMENTAL LABELING.
When using [INSERT BRAND NAME] as permitted according to this supplemental labeling, read and
follow all applicable directions, restrictions, and precautions on the label booklet provided with the
pesticide container and on this supplemental labeling. This supplemental labeling must be in the
possession of the user at the time of pesticide application.
[INSERT BRAND NAME HERE]
Herbicide
EPA Reg. No. 524-454
[INSERT TITLE OF SUPPLEMENTAL LABEL]
Keep out of reach of children
WARNING! AVISO!
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do
not understand the label, find someone to explain it to you in detail.
In case of an emergency involving this product, call collect, day or night, 314-694-4000.
[INSERT BRAND NAME] is a registered trademark of [INSERT COMPANY NAME).
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in any manner inconsistent with its labeling.
This labeling must be in the possession of the user at the time of herbicide application.
[For uses other than on Roundup Ready crops: AVOID CONTACT OF THIS HERBICIDE WITH
FOLIAGE, GREEN STEMS, EXPOSED NON-WOODY ROOTS OR FRUIT OF CROPS (EXCEPT AS
SPECIFIED FOR INDIVIDUAL ROUNDUP READY CROPS), DESIRABLE PLANTS AND TREES, AS
SEVERE INJURY OR DESTRUCTION MAY RESULT.]
[Optional text for uses on Roundup Ready crops only: ROUNDUP READY CROPS CONTAIN A
PATENTED GENE THAT PROVIDES TOLERANCE TO GLYPHOSATE, THE ACTIVE INGREDIENT IN
THIS PRODUCT. THIS PRODUCT WILL CAUSE SEVERE CROP INJURY OR DESTRUCTION AND
YIELD LOSS IF APPLIED TO CROPS THAT ARE NOT GLYPHOSATE TOLERANT. AVOID CONTACT
WITH FOLIAGE, GREEN STEMS, OR FRUIT OF CROPS, OR ANY DESIRABLE PLANTS THAT DO
NOT CONTAIN A GLYPHOSATE TOLERANCE GENE, AS SEVERE PLANT INJURY OR
DESTRUCTION MAY RESULT.]
[Optional text for non-crop uses only: AVOID CONTACT OF HERBICIDE WITH FOLIAGE, STEMS,
EXPOSED NON-WOODY ROOTS OR FRUIT OF CROPS, DESIREABLE PLANTS AND TREES,
BECAUSE SEVERE INJURY OR DESTRUCTION MAY RESULT.]
[For uses other than on Roundup Ready crops: See "PRODUCT INFORMATION" and "MIXING" sections
of the label booklet for [INSERT BRAND NAME] for essential product information.]
Master Label 524-454 Page 118 of 139 Submitted August 26, 2009

) )
III. SUPPLEMENTAL LABELING
[Optional text for uses on Roundup Ready crops only: See the "PRODUCT INFORMATION", "MIXING"
and "ROUNDUP READY CROPS" sections of the label booklet for [INSERT BRAND NAME] for essential
product information.]
[INSERT SPECIFIC DIRECTIONS FOR USE TEXT FROM THE FOLLOWING SECTIONS HERE]
Read the "Limit of Warranty and Liability" in the label booklet for [INSERT BRAND NAME] before using.
These terms apply to this supplemental labeling and if these terms are not acceptable, return the product
unopened at once.
© [DATE]
[INSERT COMPANY NAME]
[INSERT COMPANY ADDRESS]
I A. USE IN DORMANT ALFALFA
DIRECTIONS FOR USE
This product will control or suppress many weeds, including quackgrass, downy brome and cheatgrass in
dormant alfalfa.
Apply 8 to 12 fluid ounces of this product per acre. Apply in the spring to alfalfa that is dormant. Apply
after spring temperatures have warmed enough to encourage resumption of weed growth, but prior to
initiation of trifoliate leaf expansion of alfalfa. Application made after expansion of the first trifoliate leaf of
the alfalfa will cause growth reduction and reduced crop yield.
Do not use ammonium sulfate when spraying dormant alfalfa with [INSERT BRAND NAME].
Do not use this product where a slight yield reduction in the first cutting of alfalfa cannot be tolerated.
Do not make more than one application per year.
Allow 36 hours after application before grazing livestock or harvesting.
Slight discoloration of the alfalfa may occur, but the alfalfa will re-green and re-grow under moist soil
conditions as effects of this product wear off.
Application of this product is limited to persons who have attended an approved training program.
Application of this product can cause crop injury. Any crop injury is the sole responsibility of the
applicator.
B. CONTROL OF ANNUAL WEEDS IN COASTAL BERMUDAGRASS PASTURES
PRIOR TO SPRING GROWTH OR IMMEDIATELY AFTER FIRST CUTTING
DIRECTIONS FOR USE
This product may be applied at 16 fluid ounces per acre to control the weeds listed below and most other
winter annual grass and broad leaf weeds in established coastal bermudagrass pastures.
Annual bluegrass
Cheat
Crabgrass
Henbit
TIMING OF APPLICATION
Master Label 524-454
Johnsongrass, seedling
Little barley
Oats
Ryegrass, Italian
Page 119 of 139
Sand bur, field
Sunflower
Wheat
Wild mustard
Submitted August 26, 2009

III. SUPPLEMENTAL LABELING
Application prior to spring growth: Apply this product in either late winter or early spring, but before new
coastal bermudagrass growth begins in the spring. Application to new growth can damage the
bermudagrass.
Remove domestic livestock from the pasture before making the application. Wait 60 days after making
this application before grazing or harvesting the treated area.
Application following the first cutting: Apply this product after the first bermudagrass cutting when the
bermudagrass has not yet begun to re-grow. Application made after re-growth has begun can damage
the bermudagrass.
Remove domestic livestock from the pasture before making the application. Wait 28 days after making
this application before grazing or harvesting the treated area.
NOTE: ONLY ONE APPLICATION PER YEAR MAY BE MADE TO ANY ONE FIELD. A SPRING
APPLICATION PRIOR TO GROWTH AND AN APPLICATION FOLLOWING THE FIRST CUTTING MAY
NOT BE MADE ON THE FIELD DURING THE SAME YEAR.
C. DISTRIBUTION AND USE ONLY WITHIN SOUTH DAKOTA, FOR NON
SELECTIVE CONTROL OF LISTED ANNUAL WEEDS IN SMALL GRAIN
CROPPING SYSTEMS
DIRECTIONS FOR USE
Refer to the [INSERT BRAND NAME] label for application rates and weeds controlled.
For ground application, apply in 3 to 5 gallons of water per acre. For aerial application, apply in 2 to 3
gallons of water per acre.
ATTENTION
AVOID DRIFT. EXTREME CARE MUST BE USED WHEN APPLYING THIS PRODUCT TO PREVENT
INJURY TO DESIRABLE PLANTS AND CROPS.
Do not allow the herbicide solution to mist, drip, drift, or splash onto desirable vegetation since minute
quantities of this herbicide can cause severe damage or destruction to the crop, plants or other areas on
which treatment was not intended. The likelihood of injury occurring from the use of this product is
greatest when winds are gusty or in excess of 5 miles per hour or when other conditions, including lesser
wind velocities, will allow spray drift to occur. When spraying, avoid combinations of pressure and nozzle
type that will result in splatter or fine particles (mist) that are likely to drift. AVOID APPLYING AT
EXCESSIVE SPEED OR PRESSURE.
NOTE: To prevent injury to adjacent desirable vegetation, appropriate buffer zones must be maintained.
Adjust boom height on ground equipment to prevent streaked, overlapped or uneven application. Coarse
sprays are less likely to drift; therefore, do not use nozzles or nozzle configurations that dispense spray
as fine spray droplets.
For aerial application, do not angle nozzles forward into the airstream, and do not increase spray volume
by increasing nozzle pressure.
Ensure uniform application. Use appropriate marking devices when applying herbicides by air.
Avoid spraying when weeds are subject to moisture stress, when dust is on foliage, or when straw
canopy covers the weeds.
Thoroughly wash aircraft, especially landing gear, after each day of spraying to remove residue of this
product accumulated during spraying or from spills. PROLONGED EXPOSURE OF THIS PRODUCT TO
UNCOATED STEEL SURFACES MAY RESULT IN CORROSION AND POSSIBLE FAILURE OF PART.
Master Label 524-454 Page 120 of 139 Submitted August 26, 2009

)
III. SUPPLEMENTAL LABELING
LANDING GEAR IS MOST SUSCEPTIBLE. The maintenance of an organic coating (paint) that meets
aerospace specification MIL-C-38413 may prevent corrosion.
D. CONTROL AND MANAGEMENT OF GL YPHOSATE-RESISTANT HORSEWEED
(MARESTAIL, Conyza canadensis) IN CROP AND NON-CROP AREAS
DIRECTIONS FOR USE
For ground application, apply in 10 to 20 gallons of water per acre. For aerial application, apply in 3 to 15
gallons of water per acre.
For tank mixtures, read and carefully observe the cautionary statements and all other information
appearing on the product labels, supplemental labeling and/or Fact Sheets published separately for all
herbicides used.
CORN
Preplant, At-Planting, Preemergence
Apply a tank mixture of this product (32 fluid ounces per acre) plus 2,4-D (0.5 pound active ingredient
per acre) before horseweed exceeds 6 inches in height. See the 2,4-D product label for time intervals
that are required between application and planting.
Dicamba may be included in the tank mixture with this product. Refer to the dicamba product label for
the time intervals that are required between application and planting, and other geographic use
restrictions.
Atrazine (1 to 2 pounds active ingredient per acre) may be included in the tank mixture to provide
residual control. Refer to the atrazine product label for specific use instructions.
In-crop (Corn Hybrids with Roundup Ready® 2 Technology only)
Corn hybrids with Roundup Ready 2 Technology include Roundup Ready Corn 2 and seed products
displaying the Roundup Ready 2 Technology logo.
Apply a tank mixture of this product (32 fluid ounces per acre) plus Clarity (8 to 16 fluid ounces per
acre) or 2,4-D (0.5 to 1.0 pound active ingredient per acre) between corn emergence and the 5-leaf
stage of growth (approximately 8 inches tall).
Dicamba may be included in the tank mixture with this product. Refer to the dicamba product label for
the time intervals that are required between application and planting and other geographic use
restrictions.
COTTON
Preplant
For control of horseweed, apply this product (32 fluid ounces per acre) in a tank-mix with Clarity (8 fluid
ounces per acre). This application must be made 21 to 35 days before planting and before horseweed
reaches 6 inches in height. In order to avoid crop injury, a minimum interval of 21 days during which
there is at least 1 inch of cumulative rainfall must occur between Clarity application and planting of
cotton.
2,4-D may be included in the tank mixture with this product. Refer to the 2,4-D product label for the
time intervals that are required between application and planting and other geographic use restrictions.
Post-directed (Roundup Ready Cotton and Roundup Ready Flex Cotton varieties only)
Management of early season weed competition and the development of a crop height differential
between cotton and horseweed are often achieved by a combination of preplant burndown and
Master Label 524-454 Page 121 of 139 Submitted August 26, 2009

) ) \'d\b cf \40
III. SUPPLEMENTAL LABELING
postemergence over-the-top and/or directed applications of this product. These measures enhance the
development of a height differential that is necessary to successfully make post-directed treatments.
Make in-crop, post-directed applications of MSMA (2 pounds active ingredient per acre) tank-mixed
with diuron (0.5 to 0.75 pound active ingredient per acre) when the temperature is 80°F or higher.
SOYBEAN
Preplant
It is strongly encouraged that horseweed be controlled prior to planting. Apply a tank mixture of this
product (32 fluid ounces per acre) with 2,4-D (0.5 pounds active ingredient per acre) before horseweed
exceeds 6 inches in height. See the 2,4-D product label for time intervals that are required between
application and planting.
In-crop (Roundup Ready Soybean and Roundup Ready 2 Yield Soybean varieties only)
This treatment can be used as a salvage treatment for a horseweed infestation that was not controlled
prior to planting and before horseweed exceeds 6 inches in height. Apply a tank mixture of this product
(32 fluid ounces per acre) with FirstRate (0.3 ounces per acre) between full emergence of the first
trifoliate leaf and 50% flowering stage of soybean.
TREE AND VINE CROPS
Orchards (Porne Fruit, Stone Fruit and Tree Nuts)
Apply 2 quarts of this product plus up to 1 pound of 2,4-D per acre at the rosette stage and before
marestail exceeds 6 inches in height. Apply using a carrier volume of 15 gallons per acre. Ensure that
the specific 2,4-D product being used is labeled for use with the crop being grown. Read and follow
label directions for all products used in the tank mixture. Further local restrictions may apply.
Vine crops (grapes only)
Apply 2 quarts of this product plus up to 1 pound of 2,4-D per acre at the rosette stage before marestail
exceeds 6 inches in height. Apply using a carrier volume of 15 gallons per acre. Ensure that the
specific 2,4-D product being used is labeled for use with the crop being grown. A residual herbicide,
such as diuron, may provide additional preemergence control. Read and follow label directions for all
products used in the tank mixture. Further local restrictions may apply.
NON-CROP AREAS
Apply 1 quart of this product per acre in a tank mixture with one or more the following products at the
rosette stage before horseweed exceeds 6 inches in height. Ensure that the specific product being used
is labeled for use on the target site. Refer to the product labels for approved sites and application rates.
Read and carefully observe the cautionary statements and all other information appearing on the labels of
all herbicides used. Use according to the most restrictive precautionary statements for each product in
the mixture.
2,4-D1 Krovar I DF Overdrive Velpar DF
Crossbow L Landmark" MP Telar DF
dicamba1 Landmark MP Transline
Gallery 75 DF Milestone Vanquish
Tank mixtures with products containing this generic active ingredient may be made provided the
specific product is labeled for this use.
ATTENTION
AVOID DRIFT. EXTREME CARE MUST BE USED WHEN APPLYING THIS PRODUCT TO PREVENT
INJURY TO DESIRABLE PLANTS AND CROPS.
Master Label 524-454 Page 122 of 139 Submitted August 26, 2009

III. SUPPLEMENTAL LABELING
E. LIMITATIONS ON AERIAL APPLICATION IN CALIFORNIA ONLY, INCLUDING
FRESNO COUNTY, CALIFORNIA
DIRECTIONS FOR USE
All labeled treatments may be made by aerial equipment where appropriate, provided that the applicator
complies with the precautions and restrictions specified on this supplemental labeling and in the product
label booklet. Refer to Aerial Equipment in the "APPLICATION EQUIPMENT AND TECHNIIQUES"
section of the product label for additional information. Refer to the individual use site section of the
product label, or to other supplemental labeling or technical Fact Sheets published separately for this
product by [INSERT BRAND NAME], for specific use instructions.
AVOID DRIFT-DO NOT APPLY WHEN WINDS ARE GUSTY OR UNDER ANY OTHER CONDITION
WHICH FAVORS DRIFT. DRIFT MAY CAUSE DAMAGE TO ANY VEGETATION CONTACTED TO
WHICH TREATMENT IS NOT INTENDED. TO PREVENT INJURY TO ADJACENT DESIRABLE
VEGETATION, APPROPRIATE BUFFER ZONES MUST BE MAINTAINED.
Use the following guidelines when aerial applications are made near crops or desirable perennial
vegetation after bud break and before total leaf drop, and/or near other desirable vegetation or annual
crops:
1. Do not apply within 1 00 feet of all desirable vegetation or crop(s).
2. If wind up to 5 miles per hour is blowing toward desirable vegetation or crop(s), do not apply within
500 feet of the desirable vegetation or crop(s).
3. Winds blowing from 5 to 10 miles per hour toward desirable vegetation or crop(s) may require buffer
zones in excess of 500 feet.
4. Do not apply when winds are in excess of 10 miles per hour or when inversion conditions exist.
5. Apply by air only to nonresidential areas.
When applied as directed under the conditions described, this product controls annual and perennial
weeds as listed in the label booklet.
When tank mixing this product with 2,4-D, only 2,4-D amine formulations may be used for aerial
applications in California. Tank mixtures with 2,4-D amine formulations may be applied by air in California
for fallow and reduced tillage systems, and alfalfa and pasture renovation applications only. This product,
when tank mixed with dicamba, may not be applied by air in California.
ADDITIONAL INFORMATION FOR FRESNO COUNTY, CALIFORNIA
The following information applies only from February 15 through March 31 within the following boundaries
of Fresno County, California:
North:
South:
East:
West:
Fresno County line
Fresno County line
State Highway 99
Fresno County line
Always read and follow the label directions and precautionary statements for all products used in the
aerial application.
Observe the following directions to minimize off-site movement during aerial application of this product.
Minimization of off-site movement is the responsibility of the grower, Pest Control Advisor and aerial
applicator.
Master Label 524-454 Page 123 of 139 Submitted August 26, 2009

)
III. SUPPLEMENTAL LABELING
Written Recommendations
A written recommendation MUST be submitted by or on behalf of the applicator to the Fresno County
Agricultural Commissioner 24 hours prior to the application. This written recommendation MUST state the
proximity of surrounding crops, and that conditions of each manufacturer's product label and this label
have been satisfied.
Aerial Applicator Training and Equipment
Aerial application of this product is limited to pilots who have successfully completed a Fresno County
Agricultural Commissioner and California Department of Pesticide Regulation approved training program
for aerial application of herbicides. All aircraft must be inspected, critiqued in flight and certified at a
Fresno County Agricultural Commissioner approved fly-in. Test and calibrate spray equipment at intervals
sufficient to insure that proper rates of herbicides and adjuvants are being applied during commercial use.
Applicator must document such calibrations and testing. Demonstration of performance at Fresno County
Agricultural Commissioner approved fly-ins constitutes such documentation, or other written records
showing calculations and measurements of flight and spray parameters acceptable to the Fresno County
Agricultural Commissioner.
Applications at Night-Do not apply this product by air earlier than 30 minutes prior to sunrise and/or
later than 30 minutes after sunset without prior permission from the Fresno County Agricultural
Commissioner.
To report known or suspected misuse of this product, call 1-800-332-3111.
For additional information on the proper aerial application of this product, call 916-784-1718.
Note: For aerial application from April 1 through February 14, refer to the other sections of this
supplemental label.
I F. AERIAL APPLICATION IN ARKANSAS ONLY
DIRECTIONS FOR USE
AVOID DRIFT. DO NOT APPLY INTO STILL AIR WHERE THERE IS A TEMPERATURE INVERSION
LAYER LOW ENOUGH FOR FINE SPRAY PARTICLES TO BECOME SUSPENDED AND MOVE
OUTSIDE THE TARGET AREA WHEN THE INVERSION LAYER MOVES. DO NOT APPLY WHEN
WINDS ARE GUSTY OR UNDER ANY OTHER CONDITION THAT FAVORS DRIFT. DRIFT IS LIKELY
TO CAUSE DAMAGE TO ANY VEGETATION CONTACTED. TO PREVENT INJURY TO ADJACENT
DESIRABLE VEGETATION, APPROPRIATE BUFFER ZONES MUST BE MAINTAINED.
Use the recommended rate of this product in 3 to 15 gallons of water per acre.
Use sufficient carrier volume and appropriate equipment set-up to form droplets large enough to avoid
drift potential. Coarse droplets in the 300 to 500 (VMD) micron range are recommended.
Applications are typically to be made with the nozzle release point at 8 to 15 feet above the top of the
target plants unless a greater height is required for aircraft safety.
The distance of the outermost nozzles on the boom must not exceed 75 percent of the length of the
wingspan or rotor. In many cases, reducing this distance to 65 percent of the length of the wingspan or
rotor will improve drift control without affecting the swath width.
Nozzles must always discharge backward parallel with the air stream and never discharge downwards
more than 45 degrees on fixed wing aircraft or forward of the prevailing airflow on rotary winged aircraft.
Avoid the use of nozzles with wide-angle discharge.
Do not apply this product when winds are in excess of 10 mph.
Master Label 524-454 Page 124 of 139 Submitted August 26, 2009

) )
III. SUPPLEMENTAL LABELING
Do not apply when there is a low-level inversion where fine spray particles could be suspended in still air
and move outside the target area when the inversion layer moves. These conditions may occur when
wind speeds are less than 2 mph.
Use the following guidelines when applications are made near crops or other desirable vegetation:
1. Do not apply within 100 feet of any desirable vegetation or crops.
2. If wind up to 5 mph is blowing toward desirable vegetation or crops, do not apply within 500 feet
upwind of the desirable vegetation or crops.
3. Winds blowing from 5 to 10 mph toward desirable vegetation or crops will likely require buffer zones
in excess of 500 feet.
G. CONTROL OF BARNYARDGRASS (ECHINOCHLOA CRUS-GALLI) IN RICE
USING RENOVATION TREATMENT IN CALIFORNIA ONLY
DIRECTIONS FOR USE
Renovation Treatment
USE INSTRUCTIONS: This product may be applied as a renovation treatment in rice crops to control
barnyardgrass infestations using ground broadcast spray or hand-held equipment. Renovation is defined
as herbicide treatment that will produce crop and weed destruction in an entire field or contiguous area
treated within a field. Follow the application methods and treatment rates in the label booklet for [INSERT
BRAND NAME] herbicide.
PRECAUTIONS, RESTRICTIONS: Crop sprayed in treated area will be killed. Take care not to spray or
allow spray to drift outside the target area in order to avoid unwanted crop destruction. The rice straw and
stubble from the treated area, including a 25-foot buffer zone on all sides, shall not be used for grazing,
animal bedding or any feed purposes.
Aerial application is not permitted for rice renovation using this supplemental label.
I H. USE IN ROUNDUP READY® ALFALFA SEED PRODUCTION
DIRECTIONS FOR USE
This product will control many troublesome emerged weeds with over-the-top (in-crop) application in
Roundup Ready alfalfa grown for seed. In-crop application may be made from emergence through the
late vegetative stage, and spot treatment may be made from early bud stage through seed harvest.
For ground application using broadcast equipment, apply this product in 3 to 40 gallons of spray solution
per acre. Carefully select proper nozzle and spray pressure to avoid spraying a fine mist. For best results
with ground application equipment, use flat fan nozzles. Check for even distribution of spray droplets.
For aerial application, apply the appropriate rate of this product in 3 to 15 gallons of spray solution per
acre.
DO NOT EXCEED 2 QUARTS OF THIS PRODUCT PER ACRE WHEN MAKING APPLICATION BY AIR.
FOR AERIAL APPLICATION IN CALIFORNIA, REFER TO THE FEDERAL SUPPLEMENTAL LABEL
FOR AERIAL APPLICATION OF THIS PRODUCT IN THAT STATE. AVOID DRIFT. USE EXTREME
CARE WHEN APPLYING THIS PRODUCT TO PREVENT INJURY TO DESIRABLE PLANTS AND
CROPS THAT DO NOT CONTAIN A GLYPHOSATE TOLERANCE GENE. Do not apply during low-level
inversion conditions, when winds are gusty or under any other conditions that favor drift. Drift may cause
damage to any vegetation contacted to which treatment is not intended. To prevent injury to adjacent
desirable vegetation, appropriate buffer zones must be maintained.
Master Label 524-454 Page 125 of 139 . Submitted August 26, 2009

)
III. SUPPLEMENTAL LABELING
See the "APPLICATION EQUIPMENT AND TECHNIQUES" section of the label booklet for procedures to
avoid spray drift that may cause injury to any vegetation not intended for treatment.
Sprayer Preparation: It is important that sprayer and mixing equipment be clean and free of pesticide
residue before using to apply this product to Roundup Ready alfalfa. Follow the cleaning procedures
specified on the label of the last product(s) used. Alfalfa can be very sensitive to many herbicides at
extremely low concentrations and care must be taken to thoroughly clean all equipment prior to use.
TYPES OF APPLICATION: Preplant, At-planting, Preemergence, Postemergence, Spot Treatment, Post
harvest of seed
USE INSTRUCTIONS: For specific rates of application and instructions for control of various annual and
perennial weeds, refer to the "ANNUAL WEEDS RATE SECTION" and the "PERENNIAL WEEDS RATE
SECTION" in the [INSERT BRAND NAME] label booklet. Some weeds with multiple germination times or
suppressed (stunted) weeds may require a second application of this product after some re-growth has
occurred for complete control.
This product will also suppress or control the parasitic weed, Dodder (Cuscuta spp.) in Roundup Ready
alfalfa seed production fields. Repeat applications may be necessary for complete control.
Tank mixtures with other herbicides, insecticides, or fungicides may result in crop injury or reduced weed
control. Buyer and all users are responsible for any and all loss or damage in connection with the use or
handling of mixtures of this product with herbicides or other materials that are not expressly identified on
this labeling, or in separate supplemental labeling or Fact Sheets for this product.
Maximum Application Rates
Combined total per year for all applications 8 quarts per acre
Total Preplant, At-planting and Preemergence applications 2 quarts per acre
Total in-crop application rate from emergence through the late 6 quarts per acre vegetative stage
Postemergence (In-crop)
USE INSTRUCTIONS: Broadcast application of up to 2 quarts of this product per acre may be made
over the top of Roundup Ready alfalfa from emergence through the late vegetative stage. Do not make a
broadcast application of this product between the initiation of alfalfa budding and the harvest of seed.
Make sequential applications of this product at least 7 days apart.
Due to the biology and breeding constraints of alfalfa, up to 10% of the seedlings are susceptible and will
not survive or thrive after the first application of this product. Make a single application of at least 1 quart
of this product per acre at or before the 3 to 4 trifoliate growth stage to eliminate the effects of stand gaps
created by the loss of non-Roundup Ready plants.
Spot Treatment
USE INSTRUCTIONS: For late emerging weeds, this product may be applied as a spot treatment in
Roundup Ready alfalfa grown for seed during the early bud stage through seed harvest. Application
made during this stage may result in reduced seed yield and quality, and are the responsibility of the
grower. Make application on a spray-to-wet basis; do not spray to the point of runoff. If a spot treatment
is made after the late vegetative stage, harvested seed must not be used for alfalfa sprout production.
Post-Harvest
Master Label 524-454 Page 126 of 139 Submitted August 26, 2009

)
III. SUPPLEMENTAL LABELING
USE INSTRUCTIONS: Following harvest of Roundup Ready alfalfa seed, the stand may be managed for
forage and hay production. Refer to the Roundup Ready alfalfa section of the [INSERT BRAND NAME]
label booklet for use instructions in Roundup Ready alfalfa forage and hay production.
PRECAUTIONS, RESTRICTIONS: Do not make over-the-top (in-crop) broadcast applications of this
product between the initiation of alfalfa budding and the harvest of Roundup Ready alfalfa seed. The use
of harvested Roundup Ready alfalfa seed is not suitable for production of alfalfa sprouts. There are no
rotational crop restrictions following application of this product. Any crop listed in the label booklet for
[INSERT BRAND NAME] may be planted at any time; all other crops may be planted 30 days after
application of this product.
I. APPLICATION TO ROUNDUP READY FLEX COTTON IN THE STATE OF
ARIZONA ONLY
DIRECTIONS FOR USE
The use of the over-the-top applications described in this label on other than Roundup Ready Flex cotton
will cause crop injury and reduced yields. Drift of this product from applications made to Roundup Ready
Flex cotton onto adjacent fields of post 4-leaf (node) Roundup Ready cotton may cause extensive injury
including boll loss, delayed maturity and/or yield loss.
NOTE: The instructions provided in this supplemental label are specific to, and are to be only used with
varieties designated as Roundup Ready Flex cotton. DO NOT combine the instructions in this
supplemental label with those in the "Roundup Ready Cotton" or "Roundup Ready Flex Cotton" sections
found in the label booklet for [INSERT BRAND NAME], or with any other Roundup Ready cotton or
Roundup Ready Flex cotton instructions on labeling for this or other glyphosate-containing product. See
"Maximum Use Rate" in the "PRODUCT INFORMATION" section of the label booklet for [INSERT
BRAND NAME] for additional information.
ROUNDUP READY FLEX COTTON VARIETIES MUST BE PURCHASED FROM AN AUTHORIZED
LICENSED SEED SUPPLIER. THE DESIGNATION, "ROUNDUP READY", INDICATES THE COTTON
VARIETY CONTAINS A PATENTED PROPRIETARY TRAIT.
TYPES OF APPLICATION: Preplant, At-Planting, Preemergence, Postemergence (In-crop), Preharvest
USE INSTRICTIONS: For specific rates of application and instructions, refer to the "ANNUAL WEED
RATE SECTION" and "PERENNIAL WEED RATE SECTION" in the [INSERT BRAND NAME] label
booklet. Refer to the following table for maximum application rates of this product with Roundup Ready
Flex cotton.
Maximum Application Rates
Combined total per year for all applications 8 quarts per acre
Preplant, At-Planting, Preemergence applications 5 quarts per acre
Total of all in-crop applications from ground cracking to 60 6 quarts per acre percent open bolls
Maximum allowed from 60 percent open bolls to 7 days prior to 2 quarts per acre harvest
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting Roundup Ready Flex
cotton.
Postemergence (In-Crop)
Master Label 524-454 Page 127 of 139 Submitted August 26. 2009

III. SUPPLEMENTAL LABELING
USE INSTRUCTIONS: When applied in accordance with this label, [INSERT BRAND NAME] will control
annual grasses and broad leaf weeds listed on the product label in Roundup Ready Flex cotton. To
maximize yield potential, eliminate competing weeds early. Many perennial weeds will be controlled or
suppressed with one or more applications of this product. Use an initial application of 1 quart per acre to
control or suppress 1 to 3 inch tall annual grass and broad leaf weeds. This product may be applied using
ground application equipment at rates up to 2 quarts per acre per application postemergence to Roundup
Ready Flex cotton. In addition to broadcast application, post-directed equipment may be used to achieve
weed coverage.
PRECAUTIONS, RESTRICTIONS: The maximum rate for any single in-crop application of this product is
2 quarts per acre made using ground application equipment. In-crop application rates above 1 quart per
acre made alone, or with the addition of other crop chemical products containing surfactant, may cause a
crop response, including leaf speckling or leaf necrosis. Do not exceed a maximum rate of 3 pints of this
product per acre when making application by air. Between layby and 60 percent open bolls, the
maximum combined total rate of this product that may be applied is 2 quarts per acre. The maximum
combined total of all applications made from crop emergence to 60 percent open bolls must not exceed 6
quarts per acre.
Preharvest
USE INSTRUCTIONS: This product may be applied for preharvest annual and perennial weed control at
up to 2 quarts per acre prior to harvest of Roundup Ready Flex cotton after 60 percent boll crack.
NOTE: This product will not enhance the performance of harvest aids when applied to Roundup Ready
Flex cotton.
PRECAUTIONS, RESTRICTIONS: Allow a minimum of 7 days between application and harvest of
Roundup Ready Flex cotton.
ATTENTION: USE OF THIS PRODUCT IN ACCORDANCE WITH LABEL DIRECTIONS IS EXPECTED
TO RESULT IN NORMAL GROWTH OF ROUNDUP READY FLEX COTTON, HOWEVER, DUE TO THE
SENSITIVITY OF COTTON FRUITING TO VARIOUS ENVIRONMENTAL CONDITIONS, AGRONOMIC
PRACTICES AND OTHER FACTORS, IT IS IMPOSSIBLE TO ELIMINATE ALL RISKS ASSOCIATED
WITH THIS PRODUCT, EVEN WHEN APPLICATION IS MADE IN CONFORMANCE WITH THE LABEL
DIRECTIONS. IN SOME CASES, THESE FACTORS CAN RESULT IN BOLL LOSS, DELAYED
MATURITY AND/OR YIELD LOSS.
I J. BROADCAST APPLICATION IN CHRISTMAS TREE PLANTATIONS
DIRECTIONS FOR USE
NOTE: IF IMPROPERLY APPLIED, THIS PRODUCT HAS THE POTENTIAL TO CAUSE SEVERE
CHRISTMAS TREE INJURY. FOLLOW ALL LABEL DIRECTIONS.
This product may be applied as a broadcast spray over established Christmas trees. Ensure that adequate
buffers are maintained to prevent drift onto nearby desirable crops or vegetation. Read the entire
"APPLICATION EQUIPMENT AND TECHNIQUES" section of the [INSERT BRAND NAME] label booklet for
additional application precautions.
This application is approved for the following Christmas tree species:
Douglas fir (Pseudotsuga menziesil)
Fir species (Abies spp.)
Spruce species (Picea spp.)
Master Label 524-454 Page 128 of 139 Submitted August 26, 2009

)
III. SUPPLEMENTAL LABELING
Application may be made only after trees have completed at least a full growing season since planting or
transplanting and 1 full year prior to tree harvest.
Application may only be made in the fall after the formation of final conifer resting buds. Final resting buds
must be fully hardened and in the dormant stage. Application made at any other time may result in
unacceptable Christmas tree injury.
Avoid spray pattern overlap, as injury may occur.
Apply 1 quart of this product per acre in 5 to 30 gallons of water per acre.
NOTE: DO NOT ADD SURFACTANTS, ADDITIVES CONTAINING SURFACTANTS, OR ANY OTHER
ADDITIVES TO THIS PRODUCT AS SEVERE CHRISTMAS TREE INJURY MAY RESULT.
This product may be used at rates from 1 to 2 quarts per acre in some areas. Consult your local [INSERT
COMPANY NAME] representative or [INSERT BRAND NAME] supplier for specific use instructions if you
require rates greater than 1 quart per acre.
Drift control additives may increase Christmas tree injury.
Do not tank-mix this product with other herbicides as severe Christmas tree injury may result.
K. SELECTIVE WEED CONTROL ON [INSERT BRAND NAME]-TOLERANT PURE
GOLD® TALL FESCUE AND AURORA GOLD® FINE FESCUE SELECTIONS
DIRECTIONS FOR USE
Use this product on [INSERT BRAND NAME]-tolerant tall and fine fescue grown for seed production
only.
This product may be applied at rates of 4 t016 fluid ounces per acre as a postemergence spray on
[INSERT BRAND NAME]-tolerant tall fescue selections. See the label booklet for application instructions,
rates, weeds controlled and appropriate growth stage of weeds.
When applied postemergence, this product will control or suppress the following weeds: annual
bluegrass, mustards, downy brome, cheatgrass, chickweed, pennycress, fleabane, shepherd's-purse,
sowthistle, wild oat, dandelion, quackgrass, and Canada thistle. See the [INSERT BRAND NAME] label
booklet for a complete list of weeds controlled or suppressed.
The application rate for this use will limit the level of control of certain species of weeds.
Some crop discoloration and yellowing may occur at higher rates of application with [INSERT BRAND
NAME]-tolerant tall and fine fescue selections. Reduction in stand of these selections may occur under
stress conditions.
Timing of Application
Application can be made 6 weeks after germination and to established crops after growth resumes in the
fall until onset of dormancy, and in the spring after dormancy break until 60 days prior to harvest.
Avoid spraying during or within two weeks after periods when air temperatures fall below 25°F.
Remove domestic livestock from the seed production field prior to application. Wait 60 days after making .
this application before grazing or harvesting the treated area.
NOTE: Only two applications per crop growth cycle may be made to anyone site. If two applications are
required, only one fall and one spring application may be made during one 12 month cycle.
Master Label 524-454 Page 129 of 139 Submitted August 26, 2009

'0\ at \40
III. SUPPLEMENTAL LABELING
I L. TANK MIXTURES FOR TOUGH TO CONTROL WEEDS
DIRECTIONS FOR USE
Use in areas including airports, apartment complexes, Christmas tree farms, commercial sites, ditch
banks, dry ditches, dry canals, fencerows, golf courses, greenhouses, industrial sties, landscape areas,
lumber yards, manufacturing sites, municipal sites, natural areas, office complexes, ornamentals, parks,
parking areas, pastures, petroleum tank farms and pumping installations, plant nurseries, public areas,
railroads, rangeland, recreational areas, residential areas, rights-of-way, roadsides, schools, sod or turf
seed farms, sports complexes, storage areas, substations, turfgrass areas, utility sites, warehouse areas,
and wildlife management areas.
Do not allow spray mixtures of this herbicide to mist, drip, drift or splash onto desirable vegetation since
injury or destruction may occur. Do not apply when wind or other conditions favor drift.
See the "WEEDS CONTROLLED" section of the [INSERT BRAND NAME] label booklet for specific
rates. For tough to control species, where dense stands occur, or where conditions for control are not
ideal, 5 to 10 quarts per acre of this product can be used for improved results.
TANK MIXTURES
This product provides control of the emerged weeds listed in the label booklet. When applied as a tank
mixture, the following herbicides will provide preemergence and/or postemergence control of the weeds
listed in the individual product labels.
The following list of products may be tank mixed with this product, provided that the specific product is
labeled for application to the target site. Any labeled rate of this product may be used in a tank mixture
with these products. Refer to these product labels for approved sites and application rates.
2,4-D1 Hyvar X Plateau DG
Arsenal Hyvar X-L Poast
atrazine1 Krenite Quicksilver
Barricade 65WG Krovar I DF Ronstar 50 WSP
Crossbow L Landmark II MP Sahara DG
dicamba1 Landmark MP simazine1
diuron1 Landmark XP Spike 80DF
Endurance Milestone Surflan AS
Escort Oust XP Surflan WDG
Escort XP Outrider Telar DF
Gallery 75 DF Overdrive Transline
Garlon 3A pendimethalin 1 Velpar DF
Garlon 4 Plateau Velpar L
Goal2XL
Tank mixtures with products containing this generic active ingredient may be made provided the
specific product is labeled for this use.
Refer to the individual product labels for specific sites, rates, carrier volumes and precautionary
statements.
Master Label 524-454 Page 130 of 139 Submitted August 26, 2009

) )
III. SUPPLEMENTAL LABELING
Read and carefully observe the label claims, cautionary statements, use rates and all other information
on the labels of all products used in these tank mixtures. Use according to the most restrictive label
directions for each product in the mixture.
Maintain good agitation at all times during the mixing process. Ensure that the tank-mix products are well
mixed with the spray solution before adding this product.
Mix only the quantity of spray solution that can be used during the same day. Tank mixtures allowed to
stand overnight may result in reduced weed control.
Maintain good agitation at all times until the contents of the tank are sprayed. If the spray mixture is
allowed to settle, thorough agitation is required to re-suspend the mixture before spraying is resumed.
When used in combination as directed by [INSERT COMPANY NAME], the liability of [INSERT
COMPANY NAME] shall in no manner extend to any damage, loss or injury not solely and directly
caused by the inclusion of the [INSERT COMPANY NAME] product in such combination use.
Outrider is a trademark of Monsanto Technology LLC. All other trademarks are the property of their
respective owners.
M. GROUND AND AERIAL APPLICATION TO BRUSH AND CHAPARRAL IN
CALIFORNIA ONLY
DIRECTIONS FOR USE
Repeat treatments may be necessary to control weeds regenerating from underground parts or seeds.
Nonionic surfactants that are labeled for use with herbicides may be used to improve wetting of foliage.
Do not reduce rates of [INSERT BRAND NAME] when adding surfactant. Read and carefully observe
surfactant rates, cautionary statements, and other information appearing on the surfactant label.
TIMING OF APPLICATION: Apply this product as a broadcast spray when plants are actively growing for
partial control of undesirable vegetation listed on this label. Best results are obtained when application is
made in the spring to early summer when brush species are at a high moisture content and flowering.
This product may be used as directed for:
• Aid to burning treatment to establish and maintain fuel breaks
• Establishing fire perimeters and black lines
• Aid to prescribed burning
• Along fire roads and rights-of-way
USE INSTRUCTIONS: Apply 2 quarts of this product per acre for partial control of the following emerged
brush and chaparral species:
Ceanothus
Ceanothus spp.
Chamise
Adenostoma fasciculatum
Sage
Salvia spp.
Scrub oak
Quercus dumosa
Make ground application in 3 to 40 gallons of total spray solution per acre.
Make aerial application (helicopter only) in 3 to 15 gallons of total spray solution per acre.
Avoid direct application to any body of water.
AVOID DRIFT-DO NOT APPLY WHEN WINDS ARE GUSTY OR UNDER ANY OTHER CONDITION
WHICH FAVORS DRIFT. DRIFT MAY CAUSE DAMAGE TO ANY VEGETATION CONTACTED TO
Master Label 524-454 Page 131 of 139 Submitted August 26. 2009

) )
III. SUPPLEMENTAL LABELING
WHICH TREATMENT IS NOT INTENDED. TO PREVENT INJURY TO ADJACENT DESIRABLE
VEGETATION, APPROPRIATE BUFFER ZONES MUST BE MAINTAINED.
For aerial application of this product, please see the supplemental label directions for aerial application
in California.
I N. CONIFER RELEASE
DIRECTIONS FOR USE
AERIAL APPLICATION
This product may be applied using aerial spray equipment for conifer release treatments.
DO NOT APPLY THIS PRODUCT BY AIR TO RIGHTS-OF-WAY SITES IN THE STATE OF
CALIFORNIA.
CONIFER RELEASE
For release, apply only where conifers have been established for more than one year. Do not disturb
vegetation prior to treatment or until visual symptoms appear after treatment. Symptoms of treatment are
slow to appear, especially in woody species treated in late fall. Injury may occur to conifers treated for
release, especially where spray patterns overlap or the higher rates are applied or when application is
made during periods of active conifer growth. Do not use additional surfactant with conifer release
applications.
Application must be made after formation of final conifer resting buds in the fall or prior to initial bud
swelling in spring. Some autumn colors on undesirable deciduous species are acceptable provided no
major leaf drop has occurred. Use the following rates for conifer release to control or partially control the
weeds listed in the "WEEDS CONTROLLED" section of the label booklet for [INSERT BRAND NAME]
herbicide.
For release of the following conifer species:
Douglas Fir Pines*
Pseudotsuga menziesii Pinus spp.
Fir Spruce
Abies spp. Picea spp.
Hemlock
Tsuga spp.
*Includes all species except eastern white pine, loblolly pine and slash pine.
Apply 1.5 to 2 quarts of this product per acre except in Washington and Oregon, west of the crest of the
Cascade Mountains. For spring treatment west of the crest of the Cascade Mountains, apply 1 quart of
this product per acre before conifer bud swell for control of annual weeds. For fall treatment in
Washington and Oregon, west of the crest of the Cascade Mountains, apply 1 to 1.5 quarts of this
product per acre before any major leaf drop of deciduous species.
For release of western hemlock apply 1 quart of this product per acre.
For release of the following conifer species:
Loblolly pine Slash pine
Pinus taeda Pinus elliottii
Eastern white pine
Pinus strobus
Master Label 524-454 Page 132 of 139 Submitted August 26, 2009

)
III. SUPPLEMENTAL LABELING
Late Season Application-Apply 1.5 to 2 quarts of this product in a minimum of 5 gallons of spray
solution per acre during early autumn. Application made prior to September 1 or when conditions are
conducive to rapid growth of conifers will result in potential for increased injury in the form of tip and/or
needle burn. Injury may decrease with later application. Some autumn colors are acceptable at time of
application. Apply prior to frost or leaf drop of undesirable plants. Application made according to label
direction will release loblolly pine, eastern white pine and slash pine by reducing competition from the
following species:
Ash
Fraxinus spp.
Cherry, black
Prunus serotina
Cherry, pin
Prunus pensylvanica
Elm
Ulmus spp.
Hawthorn
Crataegus spp.
Locust, black
Robina pseudoacacia
Maple, red
Acer rubra
Oak, black
Quercus velutina
Oak, post
Quercus stel/ata
Oak, southern red
Quercus falcala
Oak, white
Quercus alba
Persimmon
Diospyros spp.
Poplar, yellow
Liriodendron tulipfera
Sassafras
Sassafras albidum
Sourwood
Oxydendrum arboreum
Sumac, poison
Rhus vernix
Sumac, smooth
Rhus glabra
Sumac, winged
Rhus copallina
Sweetgum
Liquidambar styraciflua
Apply only to those sites where woody brush and trees listed on this label constitute the majority of the
undesirable species.
[INSERT BRAND NAME] HERBICIDE PLUS OUST TANK MIXTURE FOR CONIFER RELEASE FROM
HERBACEOUS WEEDS
To release loblolly pines from herbaceous weeds, tank mixture of this product with Oust will provide
control of annual weeds listed in the of the label booklet for [INSERT BRAND NAME] herbicide and the
Oust label, and partial control of the perennial weeds listed below.
Apply 16 to 24 fluid ounces of [INSERT BRAND NAME] herbicide with 2 to 4 ounces of Oust in 10 to 30
gallons of spray solution per acre. Make application to actively growing weeds as a broadcast spray over
the top of the young loblolly pines.
This product plus Oust tank mixtures may not be applied by air in California.
This tank mixture may be applied using aerial equipment. When applying by air, apply the appropriate
rate in 5 to 15 gallons of spray solution per acre.
For control of annual weeds below 12 inches in height (or runner length on annual vines), use the low
rates of both products. Use the higher rates of both products when annual weeds are in more advanced
stages of growth and approaching flower or seed formation.
Use the higher rates of both products for partial control of the following perennial weeds. Use the lower
rates for suppression of growth.
Bahiagrass Johnsongrass**
Master Label 524-454 Page 133 of 139 Submitted August 26, 2009

)
III. SUPPLEMENTAL LABELING
Paspa/um nota tum
Broomsedge
Andropogon virginicus
Dock, curly
Rumex crispus
Dogfennel
Eupatorium capilliforium
Fescue, tall
Festuca arundinacea
Sorghum ha/epense
Poorjoe**
Diodia teres
Trumpetcreeper*
Campsis radicans
Vaseygrass
Paspa/um urvillei
Vervain, blue
Verbena hastata
*Suppression at the higher rates only
**Control at the higher rates
Pine damage may occur or can be accentuated if treatment takes place when young trees are under
stress from drought, flood water, insects or disease.
Read and observe the cautionary statements and all other information appearing on the labels of all
herbicides used.
O. CONTROL AND MANAGEMENT OF GL YPHOSATE-RESISTANT AMARANTHUS
spp. IN CORN, COTTON, AND SOYBEAN
DIRECTIONS FOR USE
This product may be tank-mixed with other herbicides for application in accordance with label directions.
Follow all precautions and use instructions contained within each product's labeling, and use in
accordance with the most restrictive label limitations. Some products have the potential to cause crop
injury under certain conditions, at certain crop growth stages, and/or other circumstances. Read all labels
for products used in tank mixtures to determine the potential for injury prior to use. Always predetermine
the compatibility of all products used in the tank mixture by mixing small proportional quantities in
advance. A tank mixture of this product with other herbicides may cause incompatibility, antagonism, or a
reduction in product efficacy. [INSERT COMPANY NAME] has not tested all tank-mix product
formulations for compatibility, performance, and crop safety.
Management of Glyphosate-Resistant Amaranthus spp.
If a naturally occurring glyphosate-resistant biotype of an Amaranthus species is present, this product can
be tank-mixed or applied sequentially with an appropriately labeled herbicide with a different mode of
action to achieve control. Cultural and mechanical control practices (e.g. crop rotation or tillage) may also
be used as appropriate.
Not all herbicides are registered in each state or for all sites or crops for the management of Amaranthus
spp. When [INSERT BRAND NAME] is used in combination with other herbicides, refer to each
product's label and observe all precautions and limitations on the label.
Tillage or a burndown herbicide application is encouraged prior to planting.
CORN
Preplant, At-Planting, Preemergence to Corn
Apply [INSERT BRAND NAME], to control emerged weeds, in a tank-mix with a preemergence
residual herbicide such as Harness Xtra, Harness Xtra 5.6L, Degree Xtra or another residual
herbicide for the control of Amaranthus spp.
Master Label 524-454 Page 134 of 139 Submitted August 26, 2009

) )
III. SUPPLEMENTAL LABELING
Postemergence in Corn Hybrids with Roundup Ready 2 Technology (in-crop)
Corn hybrids with Roundup Ready 2 Technology include Roundup Ready Corn 2 and seed products
displaying the Roundup Ready 2 Technology logo.
Preemergence to glyphosate-resistant Amaranthus spp.
Apply [INSERT BRAND NAME], to control emerged weeds, in a tank-mix with a preemergence
residual herbicide product such as Harness Xtra, Harness Xtra 5.6L, Degree Xtra or another residual
herbicide for the control of Amaranthus spp.
Postemergence to glyphosate-resistant Amaranthus spp.
Apply [INSERT BRAND NAME] in a tank-mix with other herbicides such as 2,4-0 or dicamba
(Clarity, Banvel, or Distinct), to control emerged weeds, and a residual herbicide product such as
Harness Xtra, Harness Xtra S.6L, Degree Xtra for continued control of Amaranthus spp. Observe all
maximum annual application rate and timing restrictions.
COTTON
Preplant, At-Planting, Preemergence to Cotton
Apply [INSERT BRAND NAME], to control emerged weeds, in a tank-mix with a preemergence soil
residual herbicide product labeled for control of Amaranthus spp., such as pendimethalin (Prowl H20)
and/or f1uometuron (Cotoran).
Postemergence (In-crop) in Roundup Ready Flex Cotton and Roundup Ready Cotton
Preemergence to glyphosate-resistant Amaranthus spp.
Apply [INSERT BRAND NAME], to control emerged weeds, in a tank-mix with metolachlor prior to
the 4-leaf stage in cotton for the control of Amaranthus spp.
Preemergence to glyphosate-resistant Amaranthus spp. at layby
Apply [INSERT BRAND NAME], to control emerged weeds, in a tank-mix with a residual herbicide
product such as diuron (Direx) or f1umioxazin (Valor) post-directed to control Amaranthus spp.
Postemergence to glyphosate-resistant Amaranthus
Apply [INSERT BRAND NAME], to control emerged weeds, in a tank-mix of MSMA and diuron
(Direx) or f1umioxazin (Valor), to control emerged Amaranthus spp.
SOYBEAN
Preplant, At-Planting, Preemergence to Soybean
Preemergence to glyphosate-resistant Amaranthus spp.
Apply [INSERT BRAND NAME], to control emerged weeds, in a tank-mix with a preemergence
residual herbicide product such as alachlor (INTRRO) or another residual herbicide for control of
Amaranthus spp. For preplant application, 2,4-0 may be added to the tank-mix to help control
emerged broadleaf weeds. Follow label instructions regarding application timing relative to soybean
planting.
Postemergence to glyphosate-resistant Amaranthus spp.
Apply [INSERT BRAND NAME], to control emerged weeds, in a tank-mix with lactofen (Cobra) or
fomesafen (Flexstar) to control emerged Amaranthus spp.
Master Label 524-454 Page 135 of 139 Submitted August 26, 2009

)
III. SUPPLEMENTAL LABELING
I P. CONTROL AND MANAGEMENT OF GLYPHOSATE-RESISTANT RYEGRASS
DIRECTIONS FOR USE
This product may be tank-mixed with other herbicides for application in accordance with label directions.
Follow all precautions and use instructions contained within each product's labeling in accordance with
the most restrictive label limitations. Some products have the potential to cause crop injury under certain
conditions, at certain crop growth stages and/or under other circumstances. Read all labels for products
used in tank mixtures to determine the potential for crop injury prior to use. Always predetermine the
compatibility of all products used in the tank mixture by mixing small proportional quantities in advance.
A tank mixture of this product with other herbicides may cause incompatibility, antagonism, or a reduction
in product efficacy. [INSERT COMPANY NAME] has not tested all tank-mix product formulations for
compatibility, performance, and crop safety.
Not all herbicides are registered in each state or for all use-sites (orchards, non-crop areas, or ditch
banks) or crops for the management of ryegrass. When [INSERT BRAND NAME] is used in combination
with other herbicides, refer to each product label and observe all precautions and limitations.
Preemergence to Glyphosate-Resistant Ryegrass
Apply [INSERT BRAND NAME], to control other emerged weeds, in a tank-mix with a preemergence
herbicide product labeled for control of ryegrass.
Preemergence and Postemergence to Glyphosate-Resistant Ryegrass
Apply [INSERT BRAND NAME], to control other emerged weeds, in a tank-mix with a residual
preemergence herbicide product and a postemergence herbicide product (other than glyphosate)
labeled for control of ryegrass. Make application before ryegrass exceeds 4 inches in height.
Postemergence to Glyphosate-Resistant Ryegrass
Apply [INSERT BRAND NAME] to control other emerged weeds, in a tank-mix with another
postemergence herbicide product labeled for control of ryegrass. Make application before ryegrass
exceeds 4 inches in height.
Q. CONTROL AND MANAGEMENT OF GLYPHOSATE-RESISTANT COMMON AND
GIANT RAGWEED (Ambrosia spp.) IN CORN, COTTON AND SOYBEAN
DIRECTIONS FOR USE
Management of Glyphosate-Resistant Ragweed Species
To control a naturally occurring glyphosate-resistant biotype of common or giant ragweed, this product
can be tank-mixed or applied sequentially with an appropriately labeled herbicide with a different mode of
action. Cultural and mechanical control practices (e.g. crop rotation or tillage) may also be used as
appropriate
Not all herbicides are labeled for management of ragweed species in all states or for all sites and crops.
When this product is used in combination with other herbicides, refer to each product's label and observe
all precautions and limitations on the label.
Tillage or a burndown herbicide application is encouraged prior to planting.
CORN
Preplant, At-Planting, Preemergence to Corn
Master Label 524-454 Page 136 of 139 Submitted August 26, 2009

) ) \~or\UO
III. SUPPLEMENTAL LABELING
Apply this product, to control emerged weeds, in a tank-mix with a preemergence residual herbicide
containing atrazine, such as Harness Xtra®, Harness Xtra 5.6L, Degree Xtra® or another residual
herbicide labeled for control of ragweed species prior to the emergence of corn.
Postemergence in Corn Hybrids with Roundup Ready 2 Technology (In-crop)
Preemergence to glyphosate-resistant ragweed species
Apply this product, to control emerged weeds, in a tank-mix with a preemergence residual herbicide
containing atrazine, such as Harness Xtra, Harness Xtra 5.6L, Degree Xtra or another residual
herbicide labeled for the control of ragweed species.
Paste mergence to glyphosate-resistant ragweed species
Apply this product in a tank-mix with another herbicide, such as 2,4-0 or dicamba (Clarity, Banvel or
Distinct) to control emerged weeds, and a residual herbicide such as Harness Xtra, Harness Xtra
5.6L, or Degree Xtra for continued control of ragweed species. Observe maximum annual application
rates and timing restrictions for these products.
COTTON
Preplant, At-Planting, Preemergence to Cotton
Preemergence to glyphosate-resistant common ragweed species
For burndown application, apply this product, to control emerged weeds, in a tank-mix with a
preemergence broad leaf herbicide such as Clarity or 2,4-0. For preplant applications, 2,4-0 may be
added to the tank-mix to help control emerged broadleaf weeds. Follow label directions regarding
application timing relative to planting cotton. For applications after planting but prior to the
emergence of cotton, apply this product, to control, emerged weeds, in a tank-mix with the
preemergence residual herbicide Cotoran for continued control of common ragweed.
SOYBEAN
Preplant, At-Planting, Preemergence to Soybean
Preemergence to glyphosate-resistant ragweed species
Apply this product, to control emerged weeds, in a tank-mix with a preemergence residual herbicide
such as cloransulam (FirstRate) where ALS resistance is not an issue. For preplant application, 2,4-
o may be added to the tank-mix to help control emerged broad leaf weeds. Follow label directions
regarding timing relative to planting soybean.
Paste mergence to glyphosate-resistant ragweed species
Apply this product, to control emerged weeds, in a tank-mix with cloransulam (FirstRate), lactofen
(Cobra) or fomesafen (Flexstar) to control emerged ragweed species.
PRECAUTIONS, RESTRICTIONS: Always read and follow all label directions for all products in the tank
mixture. Some products have the potential to cause crop injury under certain conditions, growth stage
and/or other circumstances. Read the label of all products used in the tank-mix prior to use to determine
the potential for crop injury. Tank mixtures of this product with other herbicides may cause incompatibility,
antagonism, or a reduction in product efficacy. [INSERT COMPANY NAME] has not tested all product
formulations for compatibility, performance, and crop safety.
Not all herbicides are registered in every state or for all sites and crops for the management of ragweed
species. When a tank-mix with a generic active ingredient, such as 2,4-0 or atrazine is listed on this label,
the user is responsible for ensuring that the specific application being made is included on the label of the
product being used in the mixture.
Always predetermine the compatibility of all tank-mix products together in the carrier by mixing small
proportional quantities prior to mixing in the spray tank.
Master Label 524-454 Page 137 of 139 Submitted August 26. 2009

) \!11 ot)40
III. SUPPLEMENTAL LABELING
Refer to individual product labels for precautions and restrictions; use according to the most restrictive
precautionary statements for each product in the tank-mix.
R. CONTROL AND MANAGEMENT OF GL YPHOSATE-RESISTANT
JOHNSONGRASS IN CORN, COTTON AND SOYBEAN
DIRECTIONS FOR USE
A naturally occurring glyphosate-resistant biotype of johnsongrass can be controlled in corn, cotton and
soybean cropping systems by using this product along with an herbicide with a different mode of action
labeled for preemergence and/or postemergence control of johnsongrass in combination with appropriate
cultural weed control practices (e.g. crop rotation). Application of an herbicide with a different mode of
action can be made either in a single tank-mix application with this product or in sequential applications.
CORN
Preplant, At-Planting, Preemergence to Corn
Control emerged weeds with a burndown application prior to planting or the emergence of corn. For
burndown, apply this product before, during or after planting, but prior to crop emergence, to control a
broad spectrum of emerged weeds, along with Harness Xtra, Harness Xtra 5.6L or Degree Xtra for
additional weed control and suppression of emerged johnsongrass.
Postemergence in Corn Hybrids with Roundup Ready 2 Technology (in-crop)
Apply this product to control emerged weeds and in a tank-mix with Accent (nicosulfuron), Equip
(foramsulfuron and iodosulfuron), or Option (foramsulfuron) for additional weed control and
suppression of emerged johnsongrass.
COTTON
Preplant, At-Planting, Preemergence to Cotton
Control emerged weeds with a burndown application prior to planting or the emergence of cotton. For
burndown, this product can be applied before, during or after planting cotton, but prior to crop
emergence, to control a broad spectrum of emerged weeds. For additional control or suppression of
rhizome johnsongrass prior to planting cotton, apply this product along with a product containing
pendimethalin or trifluralin. For additional control of emerged johnsongrass, apply this product in a
tank-mix with SelectMAX (clethodim), Assure II (quizalofop) or Poast Plus (sethoxydim).
Postemergence to Roundup Ready Flex Cotton and Roundup Cotton (In-crop)
Apply this product to control emerged weeds and in a tank-mix with SelectMAX (clethodim), Assure II
(quizalofop) or Poast Plus (sethoxydim) for the suppression of emerged johnsongrass.
SOYBEAN
Preplant, At-Planting, Preemergence to Soybean
Control emerged weeds with a burndown application prior to planting or the emergence of soybean.
For burndown, apply this product before, during or after planting, but prior to crop emergence, to
control a broad spectrum of emerged weeds. For control or suppression of rhizome johnsongrass,
apply this product in a tank-mix with a product containing one of the following active ingredients:
alachlor, metolachlor, pendimethalin, or trifluralin. For suppression of emerged johnsongrass, apply
this product in a tank-mix with SelectMAX (clethodim), Assure II (quizalofop) or Poast Plus
(sethoxyd i m ).
Master Label 524-454 Page 138 of 139 Submitted August 26, 2009

) \40otl40
III. SUPPLEMENTAL LABELING
Postemergence to Roundup Ready Soybean and Roundup Ready 2 Yield Soybean (in-crop)
Apply this product to control emerged weeds and in a tank-mix with SelectMAX (clethodim), Assure II
(quizalofop) or Poast Plus (sethoxydim) for the suppression of emerged johnsongrass.
PRECAUTIONS/RESTRICTIONS: Always read and follow all label directions for all products in the
tank mixture. Some products have the potential to cause crop injury under certain conditions, growth
stage and/or other circumstances. Read the label of all products used in the tank-mix prior to use to
determine the potential for crop injury. Tank mixtures of this product with other herbicides may cause
incompatibility, antagonism, or a reduction in product efficacy. [INSERT COMPANY NAME] has not
tested all product formulations for compatibility, performance, and crop safety.
Not all herbicides are registered in every state or for all sites and crops for the management of
johnsongrass species. When a tank-mix with a generic active ingredient, such as alachlor,
metolachlor, pendimethalin or trifluralin is listed on this label, the user is responsible for ensuring that
the specific application being made is included on the label of the product being used in the mixture.
Always predetermine the compatibility of all tank-mix products together in the carrier by mixing small
proportional quantities prior to mixing in the spray tank.
Refer to individual product labels for precautions and restrictions; use according to the most
restrictive precautionary statements for each product in the tank-mix.
S. FOLIAR AND BROADCAST TREATMENT OF JAPANESE KNOTWEED AND
ORIENTAL BITTERSWEET
DIRECTIONS
JAPANESE KNOTWEED
For control of Japanese knotweed (Polygonum cuspidatum), this product may be applied as a 2.5-percent
(by volume) spray-to-wet solution. Ensure thorough coverage when using spray-to-wet treatments using
hand-held equipment.
For broadcast application, apply 4 quarts of this product in 3 to 40 gallons of spray solution per acre.
Late summer or fall application is ideal, while leaves are still green and after fruit formation.
ORIENTAL BITTERSWEET
For control of Oriental bittersweet (Ce/astrus orbiculatus), this product may be applied as a 2.0-percent
(by volume) spray-to-wet solution. Ensure thorough coverage when using spray-to-wet treatments using
hand-held equipment.
For broadcast application, apply 3 quarts of this product in 3 to 40 gallons of spray solution per acre.
Late summer or fall application is ideal, while leaves are still green and after fruit formation.
Master Label 524-454 Page 139 of 139 Submitted August 26, 2009