crop-chem-docs/corpus/epa_ppls/7969-406.md

# REVYTEK FUNGICIDE

- EPA Reg No: **7969-406**
- Registrant: BASF AGRICULTURAL SOLUTIONS US, LLC
- Signal word: Caution
- Active ingredients: Pyraclostrobin (15.49%); Mefentrifluconazole (11.61%); Fluxapyroxad (7.74%)
- Label accepted: 2020-11-12
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/007969-00406-20201112.pdf

---
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY
 WASHINGTON, DC 20460


New Use PRIA Unconditional v.20150320
OFFICE OF CHEMICAL SAFETY
AND POLLUTION PREVENTION

November 12, 2020

Elizabeth Kneller, Ph.D.
Product Registration Manager
BASF Corporation, Agricultural Products
P.O. Box 13528, 26 Davis Drive
Research Triangle Park, NC 27709

Subject: PRIA Label Amendment – Mefent rifluconazole: New uses for Cotton (Crop
subgroup 20C), Fruiting vegetables (Crop Group 8-10), Grasses (Crop Group 17),
Grass grown for seed, Non-grass forages (Crop Group 18), Oilseeds (Crop
subgroup 20B), and Sugarcane.
 Product Name: Revytek Fungicide
 EPA Registration Number: 7969-406
 Application Date: 9/16/19
 Petition Number: 9F8796
 Decision Number: 555961 & 555968

Dear Dr. Kneller:

The application referred to above, submitted under the Federal Insecticide, Fungicide and
Rodenticide Act, as amended is acceptable under FIFRA sec 3 (c)(5). You must submit and/or
cite all data required for registration/reregistration/registration review of your product when the
Agency requires all registrants of similar products to submit such data.

A stamped copy of your labeling is enclosed for your records. This labeling supersedes all
previously accepted labeling. You must submit one (1) copy of the final printed labeling before
you release the product for shipment with the new labeling. In accordance with 40 CFR
152.130(c), you may distribute or sell this product under the previously approved labeling for 18
months from the date of this letter. After 18 months, you may only distribute or sell this product
if it bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is
defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3.

Should you wish to add/retain a reference to the company’s website on your label, then please be
aware that the website becomes labeling under the Federal Insecticide Fungicide and Rodenticide
Act and is subject to review by the Agency. If the website is false or misleading, the product
would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40
CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In addition,
regardless of whether a website is referenced on your product’s label, claims made on the
website may not substantially differ from those claims approved through the registration process.
Therefore, should the Agency find or if it is brought to our attention that a website contains false

Page 2 of 2
EPA Reg. No. 7969-406
Decision No. 555961 & 555968

or misleading statements or claims substantially differing from the EPA approved registration,
the website will be referred to the EPA’s Office of Enforcement and Compliance.

Your release for shipment of the product constitutes acceptance of these conditions. If these
conditions are not complied with, the registration will be subject to cancellation in accordance
with FIFRA section 6. If you have any questions, please contact Stephanie Suarez by phone at
703-347-8221, or via email at Suarez.Stephanie@epa.gov .

Sincerely,


Cynthia Giles-Parker, Chief
Fungicide Branch
Registration Division (7505P)


Enclosure -stamped “accepted” label

Mefentriﬂuconazole Group 3 Fungicide
Fluxapyroxad Group 7 Fungicide
Pyraclostrobin Group 11 Fungicide
† For disease control and plant health in beans and peas, corn,
cotton, fruiting vegetables, grasses, grass grown for seed, non-
grass forages, oilseeds, peanut , rapeseed (canola), speciﬁed
small grains, sorghum, soybean, sugar beet, sugarcane, and
tuberous and corm vegetables (including potato)
† See Detailed Use Directions for detailed crop listings.
Active Ingredients*:
mefentriﬂuconazole: 2-[4-(4-chlorophenoxy)-2-(triﬂuoromethyl)phenyl]-1-
( 1 H - 1 , 2 , 4 - t r i a z o l e - 1 - y l ) p r o p a n - 2 - o l ................................... 1 1 . 6 1 %
pyraclostrobin: (carbamic acid, [2-[[[1-(4-chlorophenyl)-
1H- p y r a z o l - 3 - y l ] o x y ] m e t h y l ] p h e n y l ] m e t h o x y - , m e t h y l e s t e r ) ................ 1 5 . 4 9 %
ﬂuxapyroxad: 1H-Pyrazole-4-carboxamide, 3-(diﬂuoromethyl)-
1 - m e t h y l - N - ( 3 ' , 4 ' , 5 ' - t r i ﬂ u o r o [ 1 , 1 ' - b i p h e n y l ] - 2 - y l ) - ......................... 7 . 7 4 %
Other Ingredients: ............................................. 6 5 . 1 6 %
Total: ........................................................1 0 0 . 0 0 %
* Revytek TM fungicide contains 1.11 lbs mefentriﬂuconazole, 1.48 lbs pyraclostrobin, and
0.74 lb ﬂuxapyroxad per gallon.
EPA Reg. No. 7969-406 EPA Est. No.
KEEP OUT OF REACH OF CHILDREN
CAUTION/PRECAUCION
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en
detalle. (If you do not understand the label, ﬁnd someone to explain it to you in detail.)
See full label for complete First Aid, Precautionary Statements ,
Directions For Use , Conditions of Sale and Warranty , and state-speciﬁc
crop and/or use site restrictions.
In case of an emergency endangering life or property involving this product,
call day or night 1-800-832-HELP (4357).
Net Contents:
BASF Corporation
26 Davis Drive, Research Triangle Park, NC 27709
11/12/2020
7969-406
11/12/2020
7969-406

2
Precautionary Statements
Hazards to Humans and Domestic Animals
CAUTION. Harmful if swallowed. Avoid contact with skin,
eyes, or clothing. Remove and wash contaminated cloth-
ing before reuse. Wash thoroughly with soap and water
after handling and before eating, drinking, chewing gum,
using tobacco, or using the toilet. Prolonged or frequently
repeated skin contact may cause allergic reactions in
some individuals.
Personal Protective Equipment (PPE)
Applicators and other handlers must wear:
• Long sleeved shirt, long pants, and shoes plus socks
• Waterproof or chemical-resistant gloves (barrier laminate,
butyl rubber ≥ 14 mils, nitrile rubber ≥ 14 mils, neoprene
rubber ≥ 14 mils, polyvinyl chloride (PVC) ≥ 14 mils, or
viton ≥ 14 mils)
Follow the manufacturer’s instructions for cleaning and
maintaining PPE. If no such instructions for washables
exist, use detergent and hot water. Keep and wash PPE
separately from other laundry.
Engineering Controls
When handlers use closed systems, enclosed cabs, or air-
craft in a manner that meets the requirements listed in the
Worker Protection Standard (WPS) for agricultural
 pesticides [40 CFR 170.240(d)(4-6)], the handler PPE
requirements may be reduced or modiﬁed as speciﬁed in
the WPS.
USER SAFETY RECOMMENDATIONS
Users should:
• Wash hands thoroughly with soap and water after han-
dling and before eating, drinking, chewing gum, using
tobacco, or using the toilet.
• Remove clothing/PPE immediately if pesticide gets
inside. Then wash thoroughly and put on clean clothing.
• Remove clothing/PPE immediately after handling this
product. As soon as possible, wash thoroughly and
change into clean clothing.
Environmental Hazards
This pesticide is toxic to ﬁsh and aquatic invertebrates.
Drift and runoff may be hazardous to aquatic organisms in
water adjacent to treated areas.
DO NOT apply directly to water, or to areas where surface
water is present, or to intertidal areas below the mean high
water mark. DO NOT contaminate water when disposing
of equipment washwater or rinsate.
This product may impact surface water quality because of
runoff of rainwater. This is especially true for poorly drain-
ing soils and soils with shallow groundwater.
Groundwater Advisory
This chemical has properties and characteristics associat-
ed with chemicals detected in groundwater. This chemical
may leach into groundwater if used in areas where soils are
permeable, particularly where the water table is shallow.
Surface Water Advisory
This product is classiﬁed as having high potential for
reaching aquatic sediment via runoff for several months or
more after application. Poorly draining soils and soils with
shallow water tables are more prone to produce runoff that
contains this product. A level, well-maintained vegetative
buffer strip between areas to which this product is applied
FIRST AID
If swallowed
• Call a poison control center or doctor immediately for treatment advice.
• Have person sip a glass of water if able to swallow.
• DO NOT induce vomiting unless told to do so by a poison control center or doctor.
• DO NOT give anything by mouth to an unconscious person.
If on skin or clothing
• Take off contaminated clothing.
• Rinse skin immediately with plenty of water for 15 to 20 minutes.
• Call a poison control center or doctor for treatment advice.
If inhaled
• Move person to fresh air.
• If person is not breathing, call 911 or an ambulance; then give artiﬁcial respiration, prefer-
ably by mouth to mouth, if possible.
• Call a poison control center or doctor for further treatment advice.
If in eyes
• Hold eyes open and rinse slowly and gently with water for 15 to 20 minutes.
• Remove contact lenses, if present, after the ﬁrst 5 minutes; then continue rinsing.
• Call a poison control center or doctor for treatment advice.
HOTLINE NUMBER
Have the product container or label with you when calling a poison control center or doctor or going for treatment.
You may also contact BASF Corporation for emergency medical treatment information: 1-800-832-HELP (4357).

3
and surface water features such as ponds, streams, and
springs will reduce the potential loading of this active ingre-
dient or its degradates from runoff water and sediment.
Runoff of this product will be reduced by avoiding applica-
tion when rainfall is forecast to occur within 48 hours.
Sound erosion control practices will reduce this product’s
potential to reach aquatic sediment via runoff.
Directions For Use
It is a violation of federal law to use this product in a man-
ner inconsistent with its labeling. This labeling must be in
the user’s possession during application. Read the entire
Directions For Use and Conditions of Sale and
 Warranty before using this product.
Use Restrictions
• DO NOT use in greenhouse production.
• DO NOT apply this product in a way that will contact work-
ers or other persons, either directly or through drift. Only
 protected handlers may be in the area during application.
For any requirements speciﬁc to your state or tribe, consult
the agency responsible for pesticide regulation.
• Restriction: Revytek
TM fungicide is not for sale,
 distribution, or use in Nassau and Suffolk counties in
New York State.
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and
with the Worker Protection Standard, 40 CFR Part 170.
This standard contains requirements for the protection of
agricultural workers on farms, forests, nurseries, and
greenhouses, and handlers of agricultural pesticides. It
contains requirements for training, decontamination, notiﬁ-
cation, and emergency assistance. It also contains speciﬁc
instructions and exceptions pertaining to the statements
on this label about personal protective equipment (PPE),
restricted-entry interval, and notiﬁcation to workers. The
requirements in this box only apply to uses of this product
that are covered by the Worker Protection Standard.
DO NOT enter or allow worker entry into treated areas
during the restricted-entry interval (REI) of 12 hours.
EXCEPTION: If the product is soil injected or soil incorpo-
rated, the Worker Protection Standard, under certain
circumstances, allows workers to enter the treated area if
there will be no contact with anything that has been treated.
PPE required for early entry to treated areas that is per-
mitted under the Worker Protection Standard and that
involves contact with anything that has been treated,
such as plants, soil, or water, is:
• Coveralls
• Chemical-resistant gloves (barrier laminate, butyl
 rubber ≥ 14 mils, nitrile rubber ≥ 14 mils, neoprene
rubber ≥ 14 mils, polyvinyl chloride (PVC) ≥ 14 mils, or
viton ≥ 14 mils)
• Shoes plus socks
STORAGE AND DISPOSAL
DO NOT contaminate water, food, or feed by storage or
disposal.
Pesticide Storage
Store in original containers only. Keep container closed
when not in use. DO NOT store near food or feed.
Pesticide Disposal
Wastes resulting from using this product may be dis-
posed of on-site or at an approved waste disposal
facility. If these wastes cannot be disposed of according
to label instructions, contact your State Pesticide or
Environmental Control Agency, or the Hazardous Waste
representatives at the nearest EPA Regional Ofﬁce for
guidance.
Container Handling
Nonreﬁllable Container. DO NOT reuse or reﬁll this
container. Triple rinse or pressure rinse container (or
equivalent) promptly after emptying; then offer for recy-
cling, if available, or reconditioning, if appropriate, or
puncture and dispose of in a sanitary landﬁll, or by incin-
eration, or by other procedures approved by state and
local authorities.
Triple rinse containers small enough to shake
(capacity ≤ 5 gallons) as follows: Empty the remain-
ing contents into application equipment or a mix tank
and drain for 10 seconds after the ﬂow begins to drip. Fill
the container 1/4 full with water and recap. Shake for
10 seconds. Pour rinsate into application equipment or a
mix tank, or store rinsate for later use or disposal. Drain
for 10 seconds after the ﬂow begins to drip. Repeat this
procedure two more times.
Triple rinse containers too large to shake
 (capacity > 5 gallons) as follows: Empty the remain-
ing contents into application equipment or a mix tank.
Fill the container 1/4 full with water. Replace and tighten
closures. Tip container on its side and roll it back and
forth, ensuring at least one complete revolution, for
30 seconds. Stand the container on its end and tip it
back and forth several times. Turn the container over
onto its other end and tip it back and forth several times.
Empty the rinsate into application equipment or a mix
tank, or store rinsate for later use or disposal. Repeat
this procedure two more times.
Pressure rinse as follows: Empty the remaining con-
tents into application equipment or mix tank and
continue to drain for 10 seconds after the ﬂow begins to
drip. Hold container upside down over application
equipment or mix tank, or collect rinsate for later use or
disposal. Insert pressure rinsing nozzle in the side of the
container and rinse at about 40 PSI for at least 30 sec-
onds. Drain for 10 seconds after the ﬂow begins to drip.
(continued)

4
STORAGE AND DISPOSAL (continued)
Container Handling (continued)
Reﬁllable Container. Reﬁll this container with pesticide
only. DO NOT reuse this container for any other purpose.
Triple rinsing the container before ﬁnal disposal is the
responsibility of the person disposing of the container.
Cleaning before reﬁlling is the responsibility of the reﬁller.
Triple rinse as follows: To clean the container before
ﬁnal disposal, empty the remaining contents from this
container into application equipment or mix tank. Fill the
container about 10% full with water. Agitate vigorously or
recirculate water with the pump for 2 minutes. Pour or
pump rinsate into application equipment or rinsate col-
lection system. Repeat this rinsing procedure two more
times.
When this container is empty, replace the cap and seal all
openings that have been opened during use; return the
container to the point of purchase or to a designated
location. This container must only be reﬁlled with a pesti-
cide product. Prior to reﬁlling, inspect carefully for damage
such as cracks, punctures, abrasions, worn-out threads
and closure devices. Check for leaks after reﬁlling and
before transport. DO NOT transport if this container is
damaged or leaking. If the container is damaged, or leak-
ing, or obsolete and not returned to the point of purchase
or to a designated location, triple rinse emptied container
and offer for recycling, if available, or dispose of container
in compliance with state and local regulations.
In Case of Emergency
In case of large-scale spill of this product, call:
• CHEMTREC 1-800-424-9300
• BASF Corporation 1-800-832-HELP (4357)
In case of medical emergency regarding this product, call:
• Your local doctor for immediate treatment
• Your local poison control center (hospital)
• BASF Corporation 1-800-832-HELP (4357)
Steps to take if material is released or spilled:
• In case of spill on ﬂoor or paved surfaces, mop and
remove to chemical waste storage area until proper dis-
posal can be made if product cannot be used according
to label.
• Dike and contain the spill with inert material (sand,
earth, etc.) and transfer liquid and solid diking material to
separate containers for disposal.
• Remove contaminated clothing and wash affected skin
areas with soap and water.
• Wash clothing before reuse.
• Keep the spill out of all sewers and open bodies of water.
Product Information
 RevytekTM fungicide is a broad spectrum fungicide
 containing three active ingredients: pyraclostrobin,
 ﬂuxapyroxad, and mefentriﬂuconazole for use in beans and
peas, corn, cotton, fruiting vegetables, grasses, grass
grown for seed, non-grass forages, oilseeds, peanut, rape-
seed (canola), speciﬁed small grains, sorghum, soybean,
sugar beet, sugarcane, and tuberous and corm vegetables
(including potato). Preventive applications optimize disease
control resulting in improved plant health.
Optimum disease control is achieved when Revytek
TM
 fungicide is applied in a regularly scheduled protective
spray program and is used in a rotation program with other
non-Group 3, non-Group 7, and non-Group 11
 fungicides.
Preventive applications of Revytek
TM fungicide optimize
 disease control resulting in improved plant health. Timed
applications, as speciﬁed in the Detailed Use Directions
of this label, optimize disease control and can have posi-
tive effects on plant physiology, including improved stress
tolerance and/or improved growth efﬁciency. This overall
increased plant health may result in an improvement in
crop growth, crop quality and/or crop yields. These results
may vary according to factors such as the crop, crop
genetics, application timing or environment.
Information regarding the contents and levels of metals
in this product is available on the internet at
 http://www.aapfco.org/metals.htm.
Mode of Action
Each of the components in RevytekTM fungicide pro-
vides a different mode of action against plant pathogenic
fungi. Pyraclostrobin belongs to the group of respiration
inhibitors classiﬁed by the US EPA and Canada PMRA as
quinone outside inhibitors (QoI) which are classiﬁed by
FRAC as Group 11 fungicides. Fluxapyroxad belongs to
the group of respiration inhibitors classiﬁed by the US EPA
and Canada PMRA as succinate dehydrogenase inhibitors
(SDHI) which are classiﬁed by FRAC as Group 7 fungi-
cides. Mefentriﬂuconazole inhibits demethylation of sterol
biosynthesis (DMI) which disrupts cell membrane synthesis
and are classiﬁed by FRAC as Group 3 fungicides.
Resistance Management
For resistance management, please note that RevytekTM
 fungicide contains both a Group 3 (mefentriﬂuconazole),
Group 7 (ﬂuxapyroxad), and Group 11 (pyraclostrobin)
fungicide. Any fungal population may contain individuals
naturally resistant to Revytek
TM fungicide and other
Group 3 or Group 7 or Group 11 fungicide. A gradual or
total loss of pest control may occur over time if these fun-
gicides are used repeatedly in the same ﬁelds. Appropriate
resistance-management strategies should be followed.
To delay fungicide resistance, take one or more of
the following steps:
• Rotate the use of Revytek
TM fungicide or other
Group 3 or Group 7 or Group 11 fungicides within a
growing season sequence with different groups that
control the same pathogens.
• Use tank mixtures with fungicides from a different group
that are equally effective on the target pest when such
use is permitted. Use at least the minimum application
rate as labeled by the manufacturer.

5
• Adopt an integrated disease management program for
fungicide use that includes scouting, uses historical
 information related to pesticide use, and crop rotation,
and which considers host plant resistance, impact of
environmental conditions on disease development, dis-
ease thresholds, as well as cultural, biological and other
chemical control practices.
• Where possible, make use of predictive disease models
to effectively time fungicide applications. Note that using
predictive models alone is not sufﬁcient to manage
 resistance.
• Monitor treatment area for lack of biological efﬁcacy that
might indicate possible resistance development.
• Contact your local extension specialist or certiﬁed crop
advisor for any additional pesticide resistance-
management and/or Integrated Pest Management
(IPM) recommendations for speciﬁc crops and
pathogens.
• For further information or to report suspected resistance
consult your local BASF representative, extension spe-
cialist, or certiﬁed crop advisor.
Application Instructions
• RevytekTM fungicide can be applied by ground or air,
and through ﬁeld sprinkler irrigation (chemigation)
 systems.
• Revytek
TM fungicide can be applied through ﬁeld
sprinkler irrigation (chemigation) systems except on
sugarcane.
• DO NOT apply this product to sugarcane through any
type of irrigation system.
• Thorough and uniform coverage is required for optimum
performance.
• Application equipment, including injection systems, must
be cleaned thoroughly before and after applying this
product, particularly if a product with the potential to
injure crops was used before application of Revytek
TM
 fungicide. Flush system with clean water.
Ground Application
- Use a minimum of 10 gallons of water per acre to
ensure uniform and thorough canopy penetration and
coverage of foliage, bloom, and fruit.
- Complete coverage of the stem all the way down to soil
level is required for suppression of soilborne diseases
of the stem.
 Revytek
TM fungicide label rates specify the amount of
 product to apply uniformly over an acre of ground on a
broadcast basis. RevytekTM fungicide may be banded
over rows or plant beds with alleys or row middles left
unsprayed. For these uses, reduce rates of Revytek
TM
 fungicide in proportion to the area sprayed to avoid appli-
cation at higher than labeled use rates.
Calculate the broadcast-equivalent rate for banded
application:
sprayed bed
width + unsprayed row
middles width = total row
width
sprayed bed
width in inches x broadcast rate
per acre = band rate
per acretotal row
width in inches
EXAMPLE: Banded application to 45-inch plant beds
separated by 15-inches of unsprayed row middles based
on a broadcast rate of 10 ozs/A:
45 inches
sprayed
bed width
+
15 inches
unsprayed
row middles width
=
60 inches
total
row width
45 inches
sprayed
bed width x
10 ﬂ ozs
RevytekTM
fungicide
per acre
=
7.5 ﬂ ozs
RevytekTM
fungicide
per acre
60 inches
total
row width
Aerial Application
- For aerial application in New York State, DO NOT
apply within 100 feet of aquatic habitats (such as,
but not limited to lakes, reservoirs, rivers,
streams, marshes, ponds, estuaries, and com-
mercial ﬁsh ponds.
- Minimum spray volume per acre: 2 gallons of spray
solution per acre
- DO NOT apply in spray solutions less than 50% water
by volume. Reduced spray volumes used in aerial
application may result in physical incompatibility,
reduced disease control, or crop injury particularly
when mixed with other products.
Field Sprinkler Irrigation (Chemigation)
Application
• Apply this product only through ﬁeld sprinkler irrigation
systems including center pivot, lateral move, end tow,
side (wheel) roll, traveler, big gun, solid set, or hand move
irrigation systems. DO NOT apply this product through
any other type of irrigation system.
• DO NOT apply this product to sugarcane through any
type of irrigation system.
• DO NOT apply when wind speed favors drift beyond the
area intended for treatment.
• Add Revytek
TM fungicide to the pesticide supply tank
containing sufﬁcient water to maintain a continuous ﬂow
by the injection equipment. In continuous moving sys-
tems, inject this product-water mixture continuously,
applying the labeled rate per acre for that crop. DO NOT
apply more than 1/2 inch (13,577 gallons) per acre. In
stationary or non-continuous moving systems, inject the

6
product-water mixture in the last 15 to 30 minutes of
each set, allowing enough time to apply the crop-speciﬁc
labeled rate per acre through the sprinkler heads. Crop
injury, lack of effectiveness, or illegal pesticide residues in
the crop can result from non uniform distribution of treat-
ed water. Uniform and thorough coverage of foliage is
required for control. Maintain constant agitation through-
out mixing and application.
• If you have questions about calibration, you should con-
tact state extension service specialists, equipment
manufacturers, or other experts.
• The system must contain a functional check valve, vacu-
um relief valve, and low pressure drain appropriately
located on the irrigation pipeline to prevent water-source
contamination from backﬂow.
• The pesticide injection pipeline must contain a functional,
automatic, quick-closing check valve to prevent the ﬂow
of ﬂuid back toward the injection pump.
• The pesticide injection pipeline must also contain a func-
tional, normally closed, solenoid-operated valve located
on the intake side of the injection pump and connected
to the system interlock to prevent ﬂuid from being with-
drawn from the supply tank when the irrigation system is
either automatically or manually shut down.
• The system must contain functional interlocking controls
to automatically shut off the pesticide injection pump
when the water pump motor stops.
• The irrigation line or water pump must include a function-
al pressure switch which will stop the water pump motor
when the water pressure decreases to the point where
pesticide distribution is adversely affected.
• Systems must use a metering pump, such as a positive
displacement injection pump (e.g., diaphragm pump),
effectively designed and constructed of materials com-
patible with pesticides and capable of being ﬁtted with a
system interlock.
• Allow sufﬁcient time for pesticide to be ﬂushed through
all lines and all nozzles before turning off irrigation water.
A person knowledgeable of the chemigation system and
responsible for its operation or under the supervision of
the responsible person, shall shut the system down and
make necessary adjustments should the need arise.
• DO NOT connect an irrigation system used for pesticide
application to a public water system unless the pesticide
label-prescribed safety devices for public water systems
are in place.
Speciﬁc Instructions for Public Water
Systems
1. Public water system means a system for the provision to
the public of piped water for human consumption if such
system has at least 15 service connections or regularly
serves an average of at least 25 individuals daily at least
60 days out of the year.
2. Chemigation systems connected to public water sys-
tems must contain a functional, reduced-pressure zone,
backﬂow preventer (RPZ) or the functional equivalent in
the water supply line upstream from the point of pesti-
cide introduction. As an option to the RPZ, the water
from the public water system should be discharged into
a reservoir tank prior to pesticide introduction. There
shall be a complete physical break (air gap) between the
outlet end of the ﬁll pipe and the top or overﬂow rim of
the reservoir tank of at least twice the inside diameter of
the ﬁll pipe.
3. The pesticide injection pipeline must contain a function-
al, automatic, quick-closing check valve to prevent the
ﬂow of ﬂuid back toward the injection pump.
4. The pesticide injection pipeline must contain a function-
al, normally closed, solenoid-operated valve located on
the intake side of the injection pump and connected to
the system interlock to prevent ﬂuid from being
 withdrawn from the supply tank when the irrigation sys-
tem is either automatically or manually shut down.
5. The system must contain functional interlocking controls
to automatically shut off the pesticide injection pump
when the water pump motor stops, or in cases where
there is no water pump, when the water pressure
decreases to the point where pesticide distribution is
adversely affected.
6. Systems must use a metering pump, such as a positive
displacement injection pump (e.g., diaphragm pump),
effectively designed and constructed of materials that
are compatible with pesticides and capable of being ﬁt-
ted with a system interlock.
7. DO NOT apply when wind speed favors drift beyond the
area intended for treatment.
Spray Drift Management
DO NOT apply when conditions favor drift beyond the
intended (target) application area. Drift-reduction measures
include:
1. DO NOT apply if wind speed is 15 mph or more. Use
caution when applying if nontarget crops are downwind
and wind is present. DO NOT apply if winds are gusty.
2. Apply only when the potential for drift to adjacent sensi-
tive areas (e.g. bodies of water or nontarget crops) is
minimal and when wind is blowing away from sensitive
areas.
3. Use caution when conditions are favorable for drift
(drought, high temperatures, low relative humidity).
4. DO NOT apply during a temperature inversion. Consult
local weather services before applying if conditions are
favorable for inversion.
Tank Mixing Other Products and Additives
It is the pesticide user’s responsibility to ensure that
all products are registered for the intended use.
Read and follow the applicable restrictions and lim-
itations and directions for use on all product labels
involved in tank mixing. Users must follow the most
restrictive directions for use and precautionary
statements of each product in the tank mixture.

7
 RevytekTM fungicide can be tank mixed with other fungi-
cides, insecticides, herbicides, liquid fertilizers, biological
control products, adjuvants, and additives. Always follow
the most restrictive label use directions. See the Detailed
Use Directions section for additional crop-speciﬁc
 information.
BASF has not tested all varieties and cultivars with all pos-
sible tank mix combinations and rates of additives or
adjuvants. Local environmental conditions can also inﬂu-
ence crop tolerance and may not match those under
which BASF has conducted testing. Physical incompatibili-
ty, reduced disease control, or injury may result from
mixing Revytek
TM fungicide with other products.
To minimize the likelihood of injury, before using any tank
mix previously listed, test the combination on a small por-
tion of the crop to be treated to ensure a phytotoxic
response will not occur as a result of application. However,
environmental variability precludes direct and consistent
projection of small area test results to future use.
When an adjuvant is used with this product, BASF recom-
mends the use of a Chemical Producers and Distributors
Association certiﬁed adjuvant.
Consult a BASF representative or local agricultural authori-
ties for more information on use of additives or adjuvants
with this product.
Adjuvant Use Limitation on Corn
Adjuvant crop damage can occur when an adjuvant is
used after the V8 stage and before the VT stage (the
VT stage is deﬁned as when the tassel’s last branch is
completely visible outside the whorl). If an adjuvant is used
after the V8 stage and before the VT stage, the grower and
the user are responsible for contacting the adjuvant source
(adjuvant distributor, retailer, or manufacturer) for advice
and conﬁrmation that the adjuvant has been tested and
proved to be safe for application from the V8 to VT corn
stages. Refer to the adjuvant label for speciﬁc use direc-
tions and restrictions. Always follow the most restrictive
label.
Compatibility Test
Before mixing components, always perform a compatibility
jar test.
1. Add components in the order listed in Mixing Order
instructions.
- For 10 gallons per acre spray volume: Start with
1 pint (2 cups) of water from the intended source at the
source temperature.
- For other spray volumes: Adjust rates accordingly.
- Dry product: Add 2 tea spoons per pound of product
per acre.
- Liquid product: Add 1 teaspoon per pint of product
per acre.
2. Always cap the jar and invert 10 cycles after component
additions.
3. When the components have all been added to the jar,
let the solution stand for 15 minutes.
4. Evaluate the solution for uniformity and stability. The
spray solution should not have free oil on the surface,
ﬁne particles that precipitate to the bottom, or thick
(clabbered) texture. DO NOT use any spray solution that
could clog spray nozzles.
Mixing Order
Make sure each component is thoroughly mixed and sus-
pended before adding tank mix partners. Except when
mixing products in PVA bags, maintain constant agitation
during mixing and application.
1. Water - Fill a thoroughly clean sprayer tank 3/4 full of
clean water and begin agitation.
2. Inductor - If an inductor is used, rinse it thoroughly
after each component has been added.
3. Products in PVA bags - Place any product contained
in water-soluble PVA bags into the mixing tank. Wait
until all water-soluble PVA bags have fully dissolved and
the product is evenly mixed in the spray tank before
 continuing.
4. Water-dispersible products (such as dry ﬂowables,
wettable powders, suspension concentrates including
 Revytek
TM fungicide, or suspo-emulsions)
- Containers 5 gallons or less: Shake well before
adding to the tank.
- Containers more than 5 gallons: Recirculate
before adding to the tank.
- Consult a BASF representative for additional informa-
tion regarding agitation and recirculation.
5. Water-soluble products
6. Emulsiﬁable concentrates (such as oil concentrates
when applicable)
7. Water-soluble additives [such as ammonium sulfate
(AMS) or urea ammonium nitrate (UAN) when applicable]
8. Remaining quantity of water

8
Crop Rotation Restrictions
Rotational Crops: Please see the following table for crop
rotational restrictions.
Crop or Crop Group
Rotation
Interval
Brassicas including broccoli, cauliﬂower
and head cabbages (crop group 5-16)
Bulb vegetables including bulb onion,
spring onion and garlic (crop group 3-07)
Cereals, including wheat, oats, barley,
triticale, rye, rice and corn (crop group 15
and crop group 16)
Cucurbits including cucumber, squash and
melons (crop group 9)
Fruiting vegetables including tomato,
eggplant, peppers (crop group 8-10)
Fresh herbs
Grass and non-grass animal feeds
including alfalfa and clover (crop group 17
and crop group 18)
Leafy vegetables including lettuces,
spinach and leafy cabbages
(crop group 4-16)
Legume vegetables including soybean
(crop group 6 and crop group 7)
Low-growing berries including
strawberries (crop group 13-07G)
Oilseeds including cotton, sunﬂower and
canola (crop group 20)
Peanut
Root and tuber vegetables including
carrot, potato, beets and sugar beet (crop
group 1 and crop group 2)
Stalk, stem and leaf petiole vegetables
including celery and asparagus
(crop group 22)
Sugarcane
Any other crop labeled for direct
application of a product containing
mefentriﬂuconazole
May be
planted
immediately
following
the last
application
Other food and feed crops, not listed above May not be
planted in
rotation

9
Detailed Use Directions
Labeled Crops
Foliar
• When conditions favor disease or disease pressure is high:
- Use the shorter interval.
- For a rate range, use the higher speciﬁed rate.
• DO NOT make more than two (2) sequential applications of RevytekTM fungicide before alternating to a
labeled non-Group 3, non-Group 7, or non-Group 11 fungicide, unless otherwise speciﬁed in the following
crop-speciﬁc use sections.
Use Rate Conversion
 ﬂ ozs product/A lb mefentriﬂuconazole/A lb pyraclostrobin/A lb ﬂuxapyroxad/A
 8 0.07 0.09 0.05
 12 0.10 0.14 0.07
 13 0.11 0.15 0.08
 15 0.13 0.17 0.09
 26 0.23 0.30 0.15
 30 0.26 0.35 0.17
 45 0.39 0.52 0.26
State-speciﬁc Restrictions - Not for sale, distribution, or use in Nassau and Suffolk counties in New York State.

10
Corn
Disease Controlled
Rate
per Acre
(ﬂ ozs
product)
per
application
Rate
per Acre
(ﬂ ozs
product)
maximum
per year
PHI
(days)
Foliar
Anthracnose
Colletotrichum graminicola
Eyespot
Aureobasidium zeae (formerly known as Kabatiella zeae)
Gray leaf spot
Cercospora zeae-maydis
Northern corn leaf blight
Exserohilum turcicum
Northern corn leaf spot
Cochliobolus carbonum
Physoderma brown spot
Physoderma maydis
Rust, common
Puccinia sorghi
Rust, southern
Puccinia polyspora
Southern corn leaf blight
Bipolaris maydis
Tar spot
Phyllachora maydis
Yellow leaf blight
Phyllosticta maydis
8 to 15 30 21
• Spray Interval
- Sweet corn: Apply at 7-day to 14-day intervals.
- Field corn, Popcorn, Silage, Seed corn: Apply at 14-day intervals.
• Adjuvant Use Limitation on Corn - Adjuvant crop damage can occur when an adjuvant is used after the
V8 stage and before the VT stage (the VT stage is deﬁned as when the tassel’s last branch is completely visi-
ble outside the whorl). If an adjuvant is used after the V8 stage and before the VT stage, the grower and the
user are responsible for contacting the adjuvant source (adjuvant distributor, retailer, or manufacturer) for
advice and conﬁrmation that the adjuvant has been tested and proved to be safe for application from the V8
to VT corn stages. Refer to the adjuvant label for speciﬁc use directions and restrictions. Always follow the
most restrictive label.
(continued)

11
Corn
(continued)
Use Restrictions
• DO NOT apply more than 15 ﬂ ozs (0.13 lb mefentriﬂuconazole, 0.17 lb pyraclostrobin, 0.09 lb ﬂuxapyroxad) per acre
per application.
• DO NOT make more than 2 applications per acre per year.
• DO NOT apply more than 30 ﬂ ozs (0.26 lb mefentriﬂuconazole, 0.35 lb pyraclostrobin, 0.17 lb ﬂuxapyroxad) per acre
per year.
• DO NOT apply more than a cumulative total of 0.26 lb for ﬁeld corn, popcorn, silage or seed corn ai/acre/year of
mefentriﬂuconazole-containing products.
• DO NOT apply more than a cumulative total of 0.39 lb for sweet corn ai/acre/year of mefentriﬂuconazole-containing
products.
• DO NOT apply more than a cumulative total of 1.18 lbs ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.18 lb ai/acre/year of ﬂuxapyroxad-containing products.
Detailed Corn Crop List - corn grown for seed, ﬁeld corn, popcorn, silage, sweet corn.

12
Cotton [†]
Disease Controlled
Rate
per Acre
(ﬂ ozs
product)
per
application
Rate
per Acre
(ﬂ ozs
product)
maximum
per year
PHI
(days)
Foliar
Alternaria leaf spot, boll rot
Alternaria spp.
Anthracnose, boll rot
Glomerella spp.
Ascochyta blight, boll rot
Ascochyta spp.
Cercospora blight and leaf spot
Cercospora spp.
Diplodia boll rot
Diplodia spp.
Hard lock, boll rot
Fusarium spp.
Phoma blight, boll rot
Phoma spp.
Rust
Phakopsora spp., Puccinia spp.
Stemphylium leaf spot
Stemphylium spp.
Target spot and Corynespora leaf spot
Corynespora cassiicola
8 to 15 30 30
• Spray Interval
- Apply before onset of disease and on a minimum interval of 7 days.
[OPTIONAL: † State-speciﬁc Restrictions - Not registered for use in California. ]
Use Restrictions
• DO NOT apply more than 15 ﬂ ozs (0.13 lb mefentriﬂuconazole, 0.17 lb pyraclostrobin, 0.087 lb ﬂuxapyroxad) per
acre per application.
• DO NOT make more than 2 applications at 15 ﬂ ozs per acre per year.
• DO NOT apply more than 30 ﬂ ozs (0.26 lb mefentriﬂuconazole, 0.34 lb pyraclostrobin, 0.17 lb ﬂuxapyroxad) per acre
per year.
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year of mefentriﬂuconazole-containing products.
• DO NOT apply more than a cumulative total of 0.58 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.18 lb ai/acre/year of ﬂuxapyroxad-containing products.

13
Fruiting Vegetables [†]
Disease Controlled
Rate
per Acre
(ﬂ ozs
product)
per
application
Rate
per Acre
(ﬂ ozs
product)
maximum
per year
PHI
(days)
Foliar
Anthracnose
Colletotrichum coccodes
Black mold
Alternaria alternata
Early blight
Alternaria solani
Powdery mildew
Leveillula taurica, Oidiopsis taurica
Septoria leaf spot
Septoria lycopersici
Target spot
Corynespora cassiicola
* Botrytis gray mold
Botrytis cinerea
* Rhizoctonia stem rot
Rhizoctonia solani
* Sclerotinia stem rot, White mold
Sclerotinia sclerotiorum
* Southern blight
Sclerotium rolfsii
8 to 15
45 0
* Late blight
Phytophthora infestans 15
• Spray Interval
- Apply on a 7-day to 14-day interval.
- Rhizoctonia rot, Sclerotium rot: Apply at 14-day to 28-day intervals.
- Use the higher speciﬁed rate and/or shorter spray interval in ﬁelds with a history of disease.
* Suppression only
[OPTIONAL:
† State-speciﬁc Restrictions - Not registered for use in California. ]
Use Restrictions
• DO NOT apply more than 15 ﬂ ozs (0.13 lb mefentriﬂuconazole, 0.17 lb pyraclostrobin, 0.09 lb ﬂuxapyroxad) per acre
per application.
• DO NOT make more than 3 applications per acre per year.
• DO NOT apply more than 45 ﬂ ozs (0.39 lb mefentriﬂuconazole, 0.52 lb pyraclostrobin, 0.26 lb ﬂuxapyroxad) per acre
per year.
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year of mefentriﬂuconazole-containing products.
• DO NOT apply more than a cumulative total of 1.2 lbs ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.18 lb ai/acre/year (0.26 lb ai/acre/year tomato only) of
 ﬂuxapyroxad-containing products.
(continued)

14
Fruiting Vegetables [†]
(continued)
Detailed Fruiting Vegetables (crop group 8-10) Crop List - African eggplant; bush tomato; bell pepper; cocona;
currant tomato; eggplant; garden huckleberry; goji berry; groundcherry; martynia; naranjilla; okra; pea eggplant;
 pepino; non-bell pepper; roselle; scarlet eggplant; sunberry; tomatillo; tomato; tree tomato; cultivars, varieties, and/or
hybrids of these.

15
Grasses [†]
Disease Controlled
Rate
per Acre
(ﬂ ozs
product)
per
application
Rate
per Acre
(ﬂ ozs
product)
maximum
per year
PHI
(days)
Foliar
Anthracnose [†]
Colletotrichum spp.
Leaf Spot/Blight [†]
Bipolaris spp., Cochliobolus spp., Drechslera spp.,
Stagonospora spp.
Net Blotch [†]
Drechslera spp., Helminthosporium spp.
Powdery Mildew [†]
Erysiphe spp.
Purple Leaf Spot [†]
Stagonospora spp.
Rust
Puccinia spp., Uromyces dactylidis
Septoria Leaf Spot [†]
Septoria spp.
8 to 13 39 14
• Spray Interval
- Apply at 14-day to 21-day intervals.
[OPTIONAL: † State-speciﬁc Restrictions - Not registered for use in California. ]
Use Restrictions
• DO NOT apply more than 13 ﬂ ozs (0.13 lb mefentriﬂuconazole, 0.15 lb pyraclostrobin, 0.075 lb ﬂuxapyroxad) per
acre per application.
• DO NOT make more than 3 applications at 15 ﬂ ozs per acre per year.
• DO NOT apply more than 39 ﬂ ozs (0.33 lb mefentriﬂuconazole, 0.45 lb pyraclostrobin, 0.22 lb ﬂuxapyroxad) per acre
per year.
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year of mefentriﬂuconazole-containing products.
• DO NOT apply more than a cumulative total of 0.45 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.22 lb ai/acre/year of ﬂuxapyroxad-containing products.
Detailed Grasses (crop group 17) Crop List - any grass, Gramineae family (either green or cured) that will be fed to
or grazed by livestock, all pasture and range grasses and grasses grown for hay or silage, except sugarcane and those
included in the cereal grains group.

16
Grass Grown for Seed [†]
Disease Controlled
Rate
per Acre
(ﬂ ozs
product)
per
application
Rate
per Acre
(ﬂ ozs
product)
maximum
per year
PHI
(days)
Foliar
Powdery mildew
Erysiphe spp.
Rust
Puccinia spp.
8 to 13 26 14
• Spray Interval
- Apply at 14-day to 21-day intervals.
[OPTIONAL: † State-speciﬁc Restrictions - Not registered for use in California. ]
Use Restrictions
• DO NOT apply more than 13 ﬂ ozs (0.13 lb mefentriﬂuconazole, 0.15 lb pyraclostrobin, 0.075 lb ﬂuxapyroxad) per
acre per application.
• DO NOT make more than 2 applications at 15 ﬂ ozs per acre per year.
• DO NOT apply more than 26 ﬂ ozs (0.22 lb mefentriﬂuconazole, 0.30 lb pyraclostrobin, 0.15 lb ﬂuxapyroxad) per acre
per year.
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year of mefentriﬂuconazole-containing products.
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.15 lb ai/acre/year of ﬂuxapyroxad-containing products.
Detailed Grass Grown for Seed (crop group 17) Crop List - any grass, Gramineae family (either green or cured)
that will be fed to or grazed by livestock, all pasture and range grasses and grasses grown for hay or silage, except
sugarcane and those included in the cereal grains group.

17
Legume Vegetables (crop group 6)
(except soybean and edamame)
Disease Controlled
Rate
per Acre
(ﬂ ozs
product)
per
application
Rate
per Acre
(ﬂ ozs
product)
maximum
per year
PHI
(days)
Foliar
Alternaria leaf and pod spot
Alternaria spp.
Anthracnose
Colletotrichum spp.
Ascochyta blight
Ascochyta spp., Phoma exigua
Asian soybean rust
Phakopsora pachyrhizi
Botrytis gray mold
Botrytis cinerea
Cercospora leaf spot
Cercospora spp.
Mycosphaerella blight
Mycosphaerella spp.
Powdery mildew
Erysiphe polygoni
Rust
Uromyces appendiculatus
* Downy mildew
Peronospora spp., Phytophthora spp.
8 to 13 26 21
• Spray Interval
- Apply at 7-day to 14-day intervals.
• Additives and Adjuvants - EXCEPT FOR - Chickpea, lentil, and ﬁeld pea - DO NOT use with emulsiﬁable
concentrate (EC) or solvent-based formulation products, crop oil concentrate (COC), methylated seed oil
(MSO), organosilicone (OS), or MSO/OS blend adjuvants.
* Suppression only
Use Restrictions
• DO NOT apply more than 13 ﬂ ozs (0.11 lb mefentriﬂuconazole, 0.15 lb pyraclostrobin, 0.08 lb ﬂuxapyroxad) per acre
per application.
• DO NOT make more than 2 applications per acre per year.
• DO NOT apply more than 26 ﬂ ozs (0.23 lb mefentriﬂuconazole, 0.30 lb pyraclostrobin, 0.15 lb ﬂuxapyroxad) per acre
per year.
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year of mefentriﬂuconazole-containing products.
• DO NOT apply more than a cumulative total of 0.29 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.18 lb ai/acre/year (0.36 lb for dried beans) of ﬂuxapyroxad-
containing products.
• Bean forage, bean hay, pea vines, and pea hay may be fed no sooner than 21 days after last application.
(continued)

18
Legume Vegetables (crop group 6)
(except soybean and edamame) (continued)
Detailed Legume Vegetables (crop group 6) Crop List (except soybean and edamame; see Soybean and
 Edamame detailed use directions)
- broad bean (fava bean), chickpea (garbanzo bean), guar, jackbean, lablab bean, lentil, pigeon pea, sword bean.
- Lupinus spp.: grain lupin, sweet lupin, white lupin, white sweet lupin.
- Phaseolus spp.: ﬁeld bean, kidney bean, lima bean, navy bean, pinto bean, runner bean, snap bean, tepary bean,
wax bean.
- Vigna spp.: adzuki bean, asparagus bean, blackeyed pea, catjang, Chinese longbean, cowpea, Crowder pea, moth
bean, mung bean, rice bean, southern pea, urd bean, yardlong bean.
- Pisum spp.: dwarf pea, edible-pod pea, English pea, ﬁeld pea, garden pea, green pea, snow pea, sugar snap pea.

19
Non-grass Forages [†]
Disease Controlled
Rate
per Acre
(ﬂ ozs
product)
per
application
Rate
per Acre
(ﬂ ozs
product)
maximum
per year
PHI
(days)
Foliar
Anthracnose
Colletotrichum trifolii
Common leaf spot
Pseudopeziza medicaginis
Leaf spot
Leptosphaerulina briosiani
Powdery mildew
Erysiphe spp.
Rhizoctonia blight/black patch
Rhizoctonia spp.
Rust
Phakopsora spp., Puccinia spp., Uromyces spp.
Spring black stem and leaf spot
Ascochyta medicaginicola
Stagonospora leaf spot
Stagonospora meliloti
Stemphylium leaf spot
Stemphylium spp.
Summer black stem and leaf spot
Cercospora medicaginis
Yellow leaf blotch
Leptotrichia medicaginis
8 to 13 39 14
• Spray Interval
- Apply at 14-day to 21-day intervals.
[OPTIONAL: † State-speciﬁc Restrictions - Not registered for use in California. ]
Use Restrictions
• DO NOT apply more than 13 ﬂ ozs (0.13 lb mefentriﬂuconazole, 0.15 lb pyraclostrobin, 0.075 lb ﬂuxapyroxad) per
acre per application.
• DO NOT make more than 3 applications at 15 ﬂ ozs per acre per year.
• DO NOT apply more than 39 ﬂ ozs (0.33 lb mefentriﬂuconazole, 0.45 lb pyraclostrobin, 0.22 lb ﬂuxapyroxad) per acre
per year.
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year of mefentriﬂuconazole-containing products.
• DO NOT apply more than a cumulative total of 0.45 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.22 lb ai/acre/year of ﬂuxapyroxad-containing products.
• DO NOT apply within 14 days of grazing or harvest for forage or hay.
• DO NOT use on rangeland.
Detailed Non-grass Forages (crop group 18) Crop List - alfalfa; bean, velvet; clover (Trifolium spp.,
 Melilotus spp.); kudzu; lespedeza; lupin; sainfoin; trefoil; vetch; vetch, crown; vetch, milk.

20
Oilseeds [†]
Disease Controlled
Rate
per Acre
(ﬂ ozs
product)
per
application
Rate
per Acre
(ﬂ ozs
product)
maximum
per year
PHI
(days)
Foliar
Alternaria leaf spot
Alternaria spp.
Blackleg
Leptosphaeria maculans
Blackspot
Alternaria spp.
Cercospora leaf spot
Cercospora spp.
Pasmo
Septoria linicola
Powdery mildew
Erysiphe spp.
Rust
Puccinia spp., Uromyces spp.
Septoria leaf spot
Septoria spp.
White rust
Albugo tragopogonis
8 to 15 30 21
• Spray Interval
- Apply at 7-day to 14-day intervals.
- Blackleg: Apply at the 2-leaf to 4-leaf stage.
- Blackspot: Apply at early pod development.
[OPTIONAL:
† State-speciﬁc Restrictions - Not registered for use in California. ]
Use Restrictions
• DO NOT apply more than 15 ﬂ ozs (0.13 lb mefentriﬂuconazole, 0.17 lb pyraclostrobin, 0.087 lb ﬂuxapyroxad) per
acre per application.
• DO NOT make more than 2 applications at 15 ﬂ ozs per acre per year.
• DO NOT apply more than 30 ﬂ ozs (0.25 lb mefentriﬂuconazole, 0.34 lb pyraclostrobin, 0.174 lb ﬂuxapyroxad) per
acre per year.
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year of mefentriﬂuconazole-containing products.
• DO NOT apply more than a cumulative total of 0.35 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.17 lb ai/acre/year of ﬂuxapyroxad-containing products.
Detailed Oilseeds (crop group 20) Crop List - borage; calendula; castor oil plant; Chinese tallowtree; cottonseed;
crambe; cuphea; echium; euphorbia; evening primrose; ﬂax seed; gold of pleasure; hare’s ear mustard; jojoba;
 lesquerella; lunaria; meadowfoam; milkweed; mustard seed; niger seed; oil radish; poppy seed; rapeseed; rose hip;
safﬂower; sesame; stokes aster; sunﬂower; sweet rocket; tallowwood; tea oil plant; vernonia; cultivars, varieties, and/or
hybrids of these.

21
Peanut
Disease Controlled
Rate
per Acre
(ﬂ ozs
product)
per
application
Rate
per Acre
(ﬂ ozs
product)
maximum
per year
PHI
(days)
Foliar
Early leaf spot
Cercospora arachidicola, Passalora arachidicola
Late leaf spot
Cercosporidium personatum, Nothopassalora personata
Pepper spot
Leptosphaerulina crassiasca
Rust
Puccinia arachidis
Web blotch
Phoma arachidicola
8 to 15
45 14
Rhizoctonia limb rot, Peg rot, Pod rot
Rhizoctonia solani
Sclerotium rot, Southern blight, Southern stem rot,
White mold
Sclerotium rolfsii
* Cylindrocladium black rot
Cylindrocladium parasiticum
* Sclerotinia blight
Sclerotinia minor
15
• Spray Interval
- Early leaf spot, Late leaf spot, Pepper spot, Rust and Web blotch: Apply at 14-day to 21-day intervals.
- Rhizoctonia rot, Sclerotium rot: Apply at 14-day to 28-day intervals.
- Use the higher speciﬁed rate and/or shorter spray interval in ﬁelds with a history of disease.
* Suppression only
Use Restrictions
• DO NOT apply more than 15 ﬂ ozs (0.13 lb mefentriﬂuconazole, 0.17 lb pyraclostrobin, 0.09 lb ﬂuxapyroxad) per acre
per application.
• DO NOT make more than 3 applications per acre per year.
• DO NOT apply more than 45 ﬂ ozs (0.39 lb mefentriﬂuconazole, 0.52 lb pyraclostrobin, 0.26 lb ﬂuxapyroxad) per acre
per year.
• DO NOT apply more than a cumulative total of 0.54 lb ai/acre/year of mefentriﬂuconazole-containing products.
• DO NOT apply more than a cumulative total of 0.73 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.27 lb ai/acre/year of ﬂuxapyroxad-containing products.
• DO NOT graze or harvest for forage use.

22
Rapeseed (canola) (subgroup 20A)
Disease Controlled
Rate
per Acre
(ﬂ ozs
product)
per
application
Rate
per Acre
(ﬂ ozs
product)
maximum
per year
PHI
(days)
Foliar
Blackleg
Leptosphaeria maculans
Blackspot
Alternaria spp.
8 to 15
30 21
* White mold/Sclerotinia stem rot
Sclerotinia sclerotiorum 15
• Spray Interval
- Apply at 14-day intervals.
- Blackleg: Apply at the 2-leaf to 4-leaf stage.
- Blackspot: Apply at early pod development.
- Sclerotinia: Apply before disease develops or at 20% to 50% ﬂowering. A second application may be made
14-days later if weather conditions are favorable for disease.
* Suppression only
Use Restrictions
• DO NOT apply more than 15 ﬂ ozs (0.13 lb mefentriﬂuconazole, 0.17 lb pyraclostrobin, 0.09 lb ﬂuxapyroxad) per acre
per application.
• DO NOT make more than 2 applications per acre per year.
• DO NOT apply more than 30 ﬂ ozs (0.26 lb mefentriﬂuconazole, 0.35 lb pyraclostrobin, 0.17 lb ﬂuxapyroxad) per acre
per year.
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year of mefentriﬂuconazole-containing products.
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.18 lb ai/acre/year of ﬂuxapyroxad-containing products.
Detailed Rapeseed (subgroup 20A) Crop List - borage; crambe; cuphea; echium; ﬂax seed; gold of pleasure;
hare’s ear mustard; lesquerella; lunaria; meadowfoam; milkweed; mustard seed; oil radish; poppy seed; rapeseed,
canola; sesame; sweet rocket; cultivars, varieties, and/or hybrids of these.

23
Small Grains (barley, oats, rye, triticale, wheat)
Disease Controlled
Rate
per Acre
(ﬂ ozs
product)
per
application
Rate
per Acre
(ﬂ ozs
product)
maximum
per year
PHI
(days)
Foliar
Black point (Kernel blight or Head mold)
Cochliobolus sativus, Alternaria spp.
Crown rust
Puccinia coronata
Helminthosporium leaf spot
Drechslera avenae
Leaf blotch
Pyrenophora avenae
Leaf rust
Puccinia spp.
Net blotch
Pyrenophora teres
Powdery mildew
Blumeria spp.
Scald
Rhynchosporium secalis
Septoria leaf and glume blotch
Septoria spp., Stagonospora spp.
Spot blotch
Cochliobolus sativus
Stem rust
Puccinia graminis
Stripe rust
Puccinia striiformis
Tan spot (Yellow leaf spot)
Pyrenophora trichostoma
8 to 13
26 21
* Eyespot
Tapesia spp. 13
• Spray Interval
- Apply at 14-day intervals.
- Begin application before disease develops.
- To protect the ﬂag leaf and maximize yields in small grains, apply immediately after ﬂag leaf emergence for
optimum results.
- Apply no later than the beginning of ﬂowering for oats, wheat and triticale.
- Apply no later than 50% head emergence (Feekes 10.3, Zadok’s 55) for barley and rye.
(continued)

24
Small Grains (barley, oats, rye, triticale, wheat)
(continued)
* Suppression only
Use Restrictions
• DO NOT apply more than 13 ﬂ ozs (0.11 lb mefentriﬂuconazole, 0.15 lb pyraclostrobin, 0.08 lb ﬂuxapyroxad) per acre
per application.
• DO NOT make more than 2 applications per acre per year.
• DO NOT apply more than 26 ﬂ ozs (0.23 lb mefentriﬂuconazole, 0.30 lb pyraclostrobin, 0.15 lb ﬂuxapyroxad) per acre
per year.
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year of mefentriﬂuconazole-containing products.
• DO NOT apply more than a cumulative total of 0.29 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.18 lb ai/acre/year of ﬂuxapyroxad-containing products.
• Not for use on rice.

25
Sorghum and Millet
Disease Controlled
Rate
per Acre
(ﬂ ozs
product)
per
application
Rate
per Acre
(ﬂ ozs
product)
maximum
per year
PHI
(days)
Foliar
Anthracnose
Colletotrichum graminicola
Gray leaf spot and Cercospora leaf spot
Cercospora spp.
Northern leaf blight
Exserohilum turcicum
Rust
Puccinia spp.
Southern leaf blight and Bipolaris leaf spot
Bipolaris spp.
8 to 15 15 21
Use Restrictions
• DO NOT apply more than 15 ﬂ ozs (0.13 lb mefentriﬂuconazole, 0.17 lb pyraclostrobin, 0.087 lb ﬂuxapyroxad) per
acre per application per year.
• DO NOT make more than 1 application per acre per year.
• DO NOT apply more than a cumulative total of 0.13 lb ai/acre/year of mefentriﬂuconazole-containing products.
• DO NOT apply more than a cumulative total of 0.20 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.09 lb ai/acre/year of ﬂuxapyroxad-containing products.
Detailed Sorghum Crop List - sorghum (milo), millet (pearl, proso).

26
Soybean and Edamame
Disease Controlled
Rate
per Acre
(ﬂ ozs
product)
per
application
Rate
per Acre
(ﬂ ozs
product)
maximum
per year
PHI
(days)
Foliar
Alternaria leaf spot
Alternaria spp.
Anthracnose
Colletotrichum truncatum
Asian soybean rust
Phakopsora pachyrhizi
Brown spot
Septoria glycines
Cercospora blight
Cercospora kikuchii
Frogeye leaf spot
Cercospora sojina
Pod and Stem blight
Diaporthe phaseolorum
Rhizoctonia aerial blight
Rhizoctonia solani
Target spot
Corynespora cassiicola
* White mold
Sclerotinia sclerotiorum
8 to 15
30 21
* Southern blight
Sclerotium rolfsii 15
• Spray Interval
- Apply at 14-day intervals.
- Soybean rust: Apply before onset of infection.
* Suppression only
(continued)

27
Soybean and Edamame
(continued)
Use Restrictions
• DO NOT apply more than 15 ﬂ ozs (0.13 lb mefentriﬂuconazole, 0.17 lb pyraclostrobin, 0.09 lb ﬂuxapyroxad) per acre
per application.
• DO NOT make more than 2 applications per acre per year.
• DO NOT apply more than 30 ﬂ ozs (0.26 lb mefentriﬂuconazole, 0.35 lb pyraclostrobin, 0.17 lb ﬂuxapyroxad) per acre
per year.
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year (0.39 lb to edamame) of mefentriﬂuconazole-
containing products.
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year (0.29 lb to edamame) of pyraclostrobin-
containing products.
• DO NOT apply more than a cumulative total of 0.18 lb ai/acre/year of ﬂuxapyroxad-containing products.
• Soybean forage may be fed no sooner than 14 days after last application. Soybean hay may be fed no sooner than
21 days after last treatment.

28
Sugar Beet
Disease Controlled
Rate
per Acre
(ﬂ ozs
product)
per
application
Rate
per Acre
(ﬂ ozs
product)
maximum
per year
PHI
(days)
Foliar
Cercospora leaf spot
Cercospora beticola
Powdery mildew
Erysiphe betae
Rhizoctonia stem canker and crown rot
Rhizoctonia solani
8 to 15 30 7
• Spray Interval
- Apply at 14-day intervals.
Prior to the 12-leaf growth stage, DO NOT apply with:
• Emulsiﬁable concentrate (EC) or solvent-based formulation products.
• Crop oil concentrate (COC), methylated seed oil (MSO), organosilicone (OS), MSO/OS blend adjuvants.
Once the sugar beet has reached the 12-leaf growth stage, the addition of emulsiﬁable concentrate (EC) or
 solvent-based formulation products, crop oil concentrate (COC), methylated seed oil (MSO), organosilicone
(OS), or MSO/OS blend adjuvants may increase the potential for leaf burn. See Tank Mixing Information for
more information.
Use Restrictions
• DO NOT apply more than 15 ﬂ ozs (0.13 lb mefentriﬂuconazole, 0.17 lb pyraclostrobin, 0.09 lb ﬂuxapyroxad) per acre
per application.
• DO NOT make more than 2 applications at 15 ﬂ ozs or 3 applications at 8 ﬂ ozs per acre per year.
• DO NOT apply more than 30 ﬂ ozs (0.26 lb mefentriﬂuconazole, 0.35 lb pyraclostrobin, 0.17 lb ﬂuxapyroxad) per acre
per year.
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year of mefentriﬂuconazole-containing products.
• DO NOT apply more than a cumulative total of 0.78 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.27 lb ai/acre/year of ﬂuxapyroxad-containing products.

29
Sugarcane [†]
Disease Controlled
Rate
per Acre
(ﬂ ozs
product)
per
application
Rate
per Acre
(ﬂ ozs
product)
maximum
per year
PHI
(days)
Infurrow
Rhizoctonia seed and seedling rot
Rhizoctonia solani
Sugarcane pineapple disease
Ceratocystis paradoxa
* Fusarium seed rot, Seedling blight
Fusarium spp.
11 to 15
30 14
Foliar
Brown rust
Puccinia melanocephala
Orange rust
Puccinia kuehnii
8 to 15
• Spray Interval
- Apply at 14-day to 28-day intervals.
* Suppression only
[OPTIONAL: † State-speciﬁc Restrictions - Not registered for use in California. ]
Use Restrictions
• DO NOT apply more than 15 ﬂ ozs (0.13 lb mefentriﬂuconazole, 0.17 lb pyraclostrobin, 0.087 lb ﬂuxapyroxad) per
acre per application.
• DO NOT make more than 2 applications at 15 ﬂ ozs per acre per year.
• DO NOT apply more than 30 ﬂ ozs (0.25 lb mefentriﬂuconazole, 0.35 lb pyraclostrobin, 0.17 lb ﬂuxapyroxad) per acre
per year.
• DO NOT apply more than a cumulative total of 0.25 lb ai/acre/year of mefentriﬂuconazole-containing products.
• DO NOT apply more than a cumulative total of 0.78 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.27 lb ai/acre/year of ﬂuxapyroxad-containing products.
• DO NOT apply this product to sugarcane through any type of irrigation system.
• DO NOT feed treated sugarcane commodities to livestock.
• Aerial Application - DO NOT use less than 5 gallons of spray solution per acre. RevytekTM fungicide can be
applied by ground or air.

30
SUGARCANE ONLY Infurrow and Soil-directed Banded Rates
Rate per
1000 Row Feet
(ﬂ ozs product)
Product Rate
(ﬂ ozs/A)
Row Width (feet)
5 feet 6 feet
1.26 11.0
1.38 12.0
1.49 13.0
1.52 11.0
1.61 14.0
1.65 12.0
1.72 15.0
1.79 13.0
1.93 14.0
2.07 15.0

31
Tuberous and Corm Vegetables (including potato - subgroup 1C)
Disease Controlled
Rate
per Acre
(ﬂ ozs
product)
per
application
Rate
per Acre
(ﬂ ozs
product)
maximum
per year
PHI
(days)
Foliar
Black dot
Colletotrichum coccodes
Brown spot and Black pit
Alternaria alternata
Early blight
Alternaria solani
8 to 15
45 7
* Botrytis gray mold
Botrytis cinerea
* Late blight
Phytophthora infestans
* Powdery mildew
Erysiphe spp., Leveillula spp.
* Rust
Puccinia spp., Uromyces spp.
* White mold
Sclerotinia sclerotiorum
12 to 15
• Spray Interval
- Apply at 7-day to 14-day intervals.
* Suppression only
Use Restrictions
• DO NOT apply more than 15 ﬂ ozs (0.13 lb mefentriﬂuconazole, 0.17 lb pyraclostrobin, 0.09 lb ﬂuxapyroxad) per acre
per application.
• DO NOT make more than 3 applications per acre per year.
• DO NOT apply more than 45 ﬂ ozs (0.39 lb mefentriﬂuconazole, 0.52 lb pyraclostrobin, 0.26 lb ﬂuxapyroxad) per acre
per year.
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year of mefentriﬂuconazole-containing products.
• DO NOT apply more than a cumulative total of 1.18 lbs ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.27 lb ai/acre/year of ﬂuxapyroxad-containing products.
Detailed Tuberous and Corm Vegetables (subgroup 1C) Crop List - arracacha; arrowroot; artichoke, Chinese;
 artichoke, Jerusalem; canna, edible; cassava, bitter and sweet; chayote (root); chufa; dasheen (taro); ginger; leren;
potato; sweet potato; tanier; turmeric; yam bean; yam, true.

32
Conditions of Sale and Warranty
The Directions For Use of this product reﬂect the
 opinion of experts based on ﬁeld use and tests. The
 directions are believed to be reliable and must be
followed carefully. However, it is impossible to eliminate
all risks inherently associated with the use of this
product. Crop injury, ineffectiveness or other unintended
consequences may result because of such factors as
weather conditions, presence of other materials, or use
of the product in a manner inconsistent with its labeling,
all of which are beyond the control of BASF
CORPORATION (“BASF”) or the Seller. To the extent
consistent with applicable law, all such risks shall be
assumed by the Buyer.
BASF warrants that this product conforms to the
chemical description on the label and is reasonably ﬁt for
the purposes referred to in the Directions For Use ,
subject to the inherent risks, referred to above.
TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, BASF MAKES NO OTHER EXPRESS OR
IMPLIED WARRANTY OF FITNESS OR
 MERCHANTABILITY OR ANY OTHER EXPRESS OR
IMPLIED WARRANTY.
TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, BUYER’S EXCLUSIVE REMEDY AND BASF’S
EXCLUSIVE LIABILITY, WHETHER IN CONTRACT,
TORT, NEGLIGENCE, STRICT LIABILITY, OR
 OTHERWISE, SHALL BE LIMITED TO REPAYMENT
OF THE PURCHASE PRICE OF THE PRODUCT.
TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, BASF AND THE SELLER DISCLAIM ANY
 LIABILITY FOR CONSEQUENTIAL, EXEMPLARY,
SPECIAL OR INDIRECT DAMAGES RESULTING
FROM THE USE OR HANDLING OF THIS
PRODUCT.
BASF and the Seller offer this product, and the Buyer
and User accept it, subject to the foregoing Conditions
of Sale and Warranty which may be varied only by
 agreement in writing signed by a duly authorized
representative of BASF.
1108
© 2020 BASF Corporation
All rights reserved.
007969-00406.20200730c.NVA 2020-04-562-0139
Supersedes: NVA 2020-04-562-0117
Supplemental: NVA 2020-04-562-0148
BASF Corporation
26 Davis Drive
Research Triangle Park, NC 27709
Revytek is a trademark of BASF.

BASF Corporation
26 Davis Drive, Research Triangle Park, NC 27709
Supplemental Label

For disease control in cotton, beans and peas, grasses, grass grown for seed,
non-grass forages (alfalfa), oilseeds, rapeseed (canola), and sugarcane
This supplemental label expires October 30, 2023, and must not be used or distributed after this date.
Active Ingredients*:
mefentrifluconazole: 2-[4-(4-chlorophenoxy)-2-(trifluoromethyl)phenyl]-1-
(1H-1,2,4-triazole-1-yl)propan-2-ol .................................................................................................................. 11.61%
pyraclostrobin: (carbamic acid, [2-[[[1-(4-chlorophenyl)-
1H-pyrazol-3-yl]oxy]methyl]phenyl]methoxy-, methyl ester) ............................................................................. 15.49%
fluxapyroxad: 1H-Pyrazole-4-carboxamide, 3-(difluoromethyl)-
1-methyl-N-(3',4',5'-trifluoro[1,1'-biphenyl]-2-yl)- ............................................................................................... 7.74%
Other Ingredients: .......................................................................................................................................... 65.16%
Total: ............................................................................................................................................................... 100.00%
* Revytek™ fungicide contains 1.11 lbs mefentrifluconazole, 1.48 lbs pyraclostrobin, and 0.74 lb fluxapyroxad per gallon.
EPA Reg. No. 7969-406
CAUTION/PRECAUCION
Directions For Use
x It is a violation of federal law to use this product in a
manner inconsistent with its labeling.
x The supplemental labeling and the entire
Revytek™ fungicide container label, EPA Reg. No.
7969-406, must be in possession of the user at the
time of application.
x Read the label affixed to the container for
Revytek before applying.
x Use of Revytek according to this labeling is subject
to the use precautions and limitations imposed by
the label affixed to the container for Revytek.
Application Instructions
Refer to the Revytek container label for complete
application instructions and restrictions.


Mefentrifluconazole Group 3 Fungicide
Fluxapyroxad Group 7 Fungicide
Pyraclostrobin Group 11 Fungicide
11/12/2020
7969-406
11/12/2020
11/12/2020
7969-406

2

Crop Rotation Restrictions
Rotational Crops: Please see the following table for
crop rotational restrictions.
Crop or Crop Group
Rotation
Interval
Brassicas including broccoli, cauliflower
and head cabbages (crop group 5-16)
Bulb vegetables including bulb onion,
spring onion and garlic (crop group
3-07)
Cereals, including wheat, oats, barley,
triticale, rye, rice and corn (crop group
15 and crop group 16)
Cucurbits including cucumber, squash
and melons (crop group 9)
Fruiting vegetables including tomato,
eggplant, peppers (crop group 8-10)
Fresh herbs
Grass and non-grass animal feeds
including alfalfa and clover (crop group
17 and crop group 18)
Leafy vegetables including lettuces,
spinach and leafy cabbages (crop
group 4-16)
Legume vegetables including soybean
(crop group 6 and crop group 7)
Low-growing berries including
strawberries (crop group 13-07G)
Oilseeds including cotton, sunflower and
canola (crop group 20)
Peanut
Root and tuber vegetables including
carrot, potato, beets and sugar beet
(crop group 1 and crop group 2)
Stalk, stem and leaf petiole vegetables
including celery and asparagus (crop
group 22)
Sugarcane
Any other crop labeled for direct
application of a product containing
mefentrifluconazole
May be
planted
immediately
following the
last
application
Other food and feed crops, not listed
above
May not be
planted in
rotation

3

Detailed Use Directions
Labeled Crops

Foliar
• When conditions favor disease or disease pressure is high:
- Use the shorter interval.
- For a rate range, use the higher specified rate.
• DO NOT make more than two (2) sequential applications of Revytek™ fungicide before alternating to a
labeled non-Group 3, non-Group 7, or non-Group 11 fungicide, unless otherwise specified in the
following crop-specific use sections.


Use Rate Conversion
 fl ozs product/A lb mefentrifluconazole/A lb pyraclostrobin/A lb fluxapyroxad/A
 8 0.07 0.09 0.05
 12 0.10 0.14 0.07

 13 0.11 0.15 0.08

 15 0.13 0.17 0.09

 26 0.23 0.30 0.15

 30 0.26 0.35 0.17

 45 0.39 0.52 0.26

State-specific Restrictions - Not for sale, distribution, or use in Nassau and Suffolk counties in New York State.

4


Cotton


 Disease Controlled
Rate per
Acre
(fl ozs
product)
per
application
Rate per
Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Foliar
Alternaria leaf spot, boll rot
Alternaria spp.
Anthracnose, boll rot
Glomerella spp.
Ascochyta blight, boll rot
Ascochyta spp.
Cercospora blight and leaf spot
Cercospora spp.
Diplodia boll rot
Diplodia spp.
Hard lock, boll rot
Fusarium spp.
Phoma blight, boll rot
Phoma spp.
Rust
Phakopsora spp., Puccinia spp.
Stemphylium leaf spot
Stemphylium spp.
Target spot and Corynespora leaf spot
Corynespora cassiicola
8 to 15 30 30
• Spray Interval
- Apply before onset of disease and on a minimum interval of 7 days.


Use Restrictions
• DO NOT apply more than 15 fl ozs (0.13 lb mefentrifluconazole, 0.17 lb pyraclostrobin, 0.087 lb fluxapyroxad)
per acre per application.
• DO NOT make more than 2 applications at 15 fl ozs per acre per year.
• DO NOT apply more than 30 fl ozs (0.26 lb mefentrifluconazole, 0.34 lb pyraclostrobin, 0.17 lb fluxapyroxad) per
acre per year.
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year of mefentrifluconazole-containing products.
• DO NOT apply more than a cumulative total of 0.58 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.18 lb ai/acre/year of fluxapyroxad-containing products.

5


Grasses


 Disease Controlled
Rate per
Acre
(fl ozs
product)
per
application
Rate per
Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Foliar
Anthracnose [†]
Colletotrichum spp.
Leaf Spot/Blight [†]
Bipolaris spp., Cochliobolus spp., Drechslera spp.,
Stagonospora spp.
Net Blotch [†]
Drechslera spp., Helminthosporium spp.
Powdery Mildew [†]
Erysiphe spp.
Purple Leaf Spot [†]
Stagonospora spp.
Rust
Puccinia spp., Uromyces dactylidis
Septoria Leaf Spot [†]
Septoria spp.
8 to 13 39 0
• Spray Interval
- Apply at 14-day to 21-day intervals.

Use Restrictions
• DO NOT apply more than 13 fl ozs (0.13 lb mefentrifluconazole, 0.15 lb pyraclostrobin, 0.075 lb fluxapyroxad)
per acre per application.
• DO NOT make more than 3 applications at 15 fl ozs per acre per year.
• DO NOT apply more than 39 fl ozs (0.33 lb mefentrifluconazole, 0.45 lb pyraclostrobin, 0.22 lb fluxapyroxad) per
acre per year.
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year of mefentrifluconazole-containing products.
• DO NOT apply more than a cumulative total of 0.45 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.22 lb ai/acre/year of fluxapyroxad-containing products.
Detailed Grasses (crop group 17) Crop List - any grass, Gramineae family (either green or cured) that will be fed
to or grazed by livestock, all pasture and range grasses and grasses grown for hay or silage, except sugarcane
and those included in the cereal grains group.

6

Grass Grown for Seed


 Disease Controlled
Rate per
Acre
(fl ozs
product)
per
application
Rate per
Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Foliar
Powdery mildew
Erysiphe spp.
Rust
Puccinia spp.
8 to 13 26 0
• Spray Interval
- Apply at 14-day to 21-day intervals.


Use Restrictions
• DO NOT apply more than 13 fl ozs (0.13 lb mefentrifluconazole, 0.15 lb pyraclostrobin, 0.075 lb fluxapyroxad)
per acre per application.
• DO NOT make more than 2 applications at 15 fl ozs per acre per year.
• DO NOT apply more than 26 fl ozs (0.22 lb mefentrifluconazole, 0.30 lb pyraclostrobin, 0.15 lb fluxapyroxad) per
acre per year.
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year of mefentrifluconazole-containing products.
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.15 lb ai/acre/year of fluxapyroxad-containing products.
Detailed Grass Grown for Seed (crop group 17) Crop List - any grass, Gramineae family (either green or cured)
that will be fed to or grazed by livestock, all pasture and range grasses and grasses grown for hay or silage, except
sugarcane and those included in the cereal grains group.

7


Legume Vegetables (crop group 6)
(except soybean and edamame)
 Disease Controlled
Rate per
Acre
(fl ozs
product)
per
application
Rate per
Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Foliar
Alternaria leaf and pod spot
Alternaria spp.
Anthracnose
Colletotrichum spp.
Ascochyta blight
Ascochyta spp., Phoma exigua
Asian soybean rust
Phakopsora pachyrhizi
Botrytis gray mold
Botrytis cinerea
Cercospora leaf spot
Cercospora spp.
Mycosphaerella blight
Mycosphaerella spp.
Powdery mildew
Erysiphe polygoni
Rust
Uromyces appendiculatus
* Downy mildew
Peronospora spp., Phytophthora spp.
8 to 13 26 21
• Spray Interval
- Apply at 7-day to 14-day intervals.

• Additives and Adjuvants - EXCEPT FOR - Chickpea, lentil, and field pea - DO NOT use with
emulsifiable concentrate (EC) or solvent-based formulation products, crop oil concentrate (COC),
methylated seed oil (MSO), organosilicone (OS), or MSO/OS blend adjuvants.

* Suppression only
Use Restrictions
• DO NOT apply more than 13 fl ozs (0.11 lb mefentrifluconazole, 0.15 lb pyraclostrobin, 0.08 lb fluxapyroxad) per
acre per application.
• DO NOT make more than 2 applications per acre per year.
• DO NOT apply more than 26 fl ozs (0.23 lb mefentrifluconazole, 0.30 lb pyraclostrobin, 0.15 lb fluxapyroxad) per
acre per year.
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year of mefentrifluconazole-containing products.
• DO NOT apply more than a cumulative total of 0.29 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.18 lb ai/acre/year (0.36 lb for dried beans) of
fluxapyroxad- containing products.
• Bean forage, bean hay, pea vines, and pea hay may be fed no sooner than 21 days after last application.
(continued)

8
Legume Vegetables (crop group 6)
(except soybean and edamame) (continued)


Detailed Legume Vegetables (crop group 6) Crop List (except soybean and edamame; see Soybean and
Edamame detailed use directions)
- broad bean (fava bean), chickpea (garbanzo bean), guar, jackbean, lablab bean, lentil, pigeon pea, sword bean.
- Lupinus spp.: grain lupin, sweet lupin, white lupin, white sweet lupin.
- Phaseolus spp.: field bean, kidney bean, lima bean, navy bean, pinto bean, runner bean, snap bean, tepary
bean, wax bean.
- Vigna spp.: adzuki bean, asparagus bean, blackeyed pea, catjang, Chinese longbean, cowpea, Crowder pea,
moth bean, mung bean, rice bean, southern pea, urd bean, yardlong bean.
- Pisum spp.: dwarf pea, edible-pod pea, English pea, field pea, garden pea, green pea, snow pea, sugar snap pea.

9

Non-grass Forages


 Disease Controlled
Rate per
Acre
(fl ozs
product)
per
application
Rate per
Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Foliar
Anthracnose
Colletotrichum trifolii
Common leaf spot
Pseudopeziza medicaginis
Leaf spot
Leptosphaerulina briosiani
Powdery mildew
Erysiphe spp.
Rhizoctonia blight/black patch
Rhizoctonia spp.
Rust
Phakopsora spp., Puccinia spp., Uromyces spp.
Spring black stem and leaf spot
Ascochyta medicaginicola
Stagonospora leaf spot
Stagonospora meliloti
Stemphylium leaf spot
Stemphylium spp.
Summer black stem and leaf spot
Cercospora medicaginis
Yellow leaf blotch
Leptotrichia medicaginis
8 to 13 39 14
• Spray Interval
- Apply at 14-day to 21-day intervals.


Use Restrictions
• DO NOT apply more than 13 fl ozs (0.13 lb mefentrifluconazole, 0.15 lb pyraclostrobin, 0.075 lb fluxapyroxad)
per acre per application.
• DO NOT make more than 3 applications at 15 fl ozs per acre per year.
• DO NOT apply more than 39 fl ozs (0.33 lb mefentrifluconazole, 0.45 lb pyraclostrobin, 0.22 lb fluxapyroxad) per
acre per year.
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year of mefentrifluconazole-containing products.
• DO NOT apply more than a cumulative total of 0.45 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.22 lb ai/acre/year of fluxapyroxad-containing products.
• DO NOT apply within 14 days of grazing or harvest for forage or hay.
• DO NOT use on rangeland.
Detailed Non-grass Forages (crop group 18) Crop List - alfalfa; bean, velvet; clover (Trifolium spp.,
Melilotus spp.); kudzu; lespedeza; lupin; sainfoin; trefoil; vetch; vetch, crown; vetch, milk.

10

Oilseeds


 Disease Controlled
Rate per
Acre
(fl ozs
product)
per
application
Rate per
Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Foliar
Alternaria leaf spot
Alternaria spp.
Blackleg
Leptosphaeria maculans
Blackspot
Alternaria spp.
Cercospora leaf spot
Cercospora spp.
Pasmo
Septoria linicola
Powdery mildew
Erysiphe spp.
Rust
Puccinia spp., Uromyces spp.
Septoria leaf spot
Septoria spp.
White rust
Albugo tragopogonis
8 to 15 30 21
• Spray Interval
- Apply at 7-day to 14-day intervals.
- Blackleg: Apply at the 2-leaf to 4-leaf stage.
- Blackspot: Apply at early pod development.


Use Restrictions
• DO NOT apply more than 15 fl ozs (0.13 lb mefentrifluconazole, 0.17 lb pyraclostrobin, 0.087 lb fluxapyroxad)
per acre per application.
• DO NOT make more than 2 applications at 15 fl ozs per acre per year.
• DO NOT apply more than 30 fl ozs (0.25 lb mefentrifluconazole, 0.34 lb pyraclostrobin, 0.174 lb fluxapyroxad)
per acre per year.
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year of mefentrifluconazole-containing products.
• DO NOT apply more than a cumulative total of 0.35 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.17 lb ai/acre/year of fluxapyroxad-containing products.
Detailed Oilseeds (crop group 20) Crop List - borage; calendula; castor oil plant; Chinese tallowtree; cottonseed;
crambe; cuphea; echium; euphorbia; evening primrose; flax seed; gold of pleasure; hare’s ear mustard; jojoba;
lesquerella; lunaria; meadowfoam; milkweed; mustard seed; niger seed; oil radish; poppy seed; rapeseed; rose hip;
safflower; sesame; stokes aster; sunflower; sweet rocket; tallowwood; tea oil plant; vernonia; cultivars, varieties,
and/or hybrids of these.

11

Rapeseed (canola) (subgroup 20A)

 Disease Controlled
Rate per
Acre
(fl ozs
product)
per
application
Rate per
Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Foliar
Blackleg
Leptosphaeria maculans
Blackspot
Alternaria spp.
8 to 15
30 21
* White mold/Sclerotinia stem rot
Sclerotinia sclerotiorum 15
• Spray Interval
- Apply at 14-day intervals.
- Blackleg: Apply at the 2-leaf to 4-leaf stage.
- Blackspot: Apply at early pod development.
- Sclerotinia: Apply before disease develops or at 20% to 50% flowering. A second application may be
made 14-days later if weather conditions are favorable for disease.


* Suppression only
Use Restrictions
• DO NOT apply more than 15 fl ozs (0.13 lb mefentrifluconazole, 0.17 lb pyraclostrobin, 0.09 lb fluxapyroxad) per
acre per application.
• DO NOT make more than 2 applications per acre per year.
• DO NOT apply more than 30 fl ozs (0.26 lb mefentrifluconazole, 0.35 lb pyraclostrobin, 0.17 lb fluxapyroxad) per
acre per year.
• DO NOT apply more than a cumulative total of 0.26 lb ai/acre/year of mefentrifluconazole-containing products.
• DO NOT apply more than a cumulative total of 0.39 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.18 lb ai/acre/year of fluxapyroxad-containing products.
Detailed Rapeseed (subgroup 20A) Crop List - borage; crambe; cuphea; echium; flax seed; gold of
pleasure; hare’s ear mustard; lesquerella; lunaria; meadowfoam; milkweed; mustard seed; oil radish; poppy
seed; rapeseed, canola; sesame; sweet rocket; cultivars, varieties, and/or hybrids of these.

12


Sugarcane [†]

 Disease Controlled
Rate per
Acre
(fl ozs
product)
per
application
Rate per
Acre
(fl ozs
product)
maximum
per year
PHI
(days)
Infurrow
Rhizoctonia seed and seedling rot
Rhizoctonia solani
Sugarcane pineapple disease
Ceratocystis paradoxa
* Fusarium seed rot, Seedling blight
Fusarium spp.
11 to 15
30 14
Foliar
Brown rust
Puccinia melanocephala
Orange rust
Puccinia kuehnii
8 to 15
• Spray Interval
- Apply at 14-day to 28-day intervals.


* Suppression only
[OPTIONAL: † State-specific Restrictions - Not registered for use in California.]
Use Restrictions
• DO NOT apply more than 15 fl ozs (0.13 lb mefentrifluconazole, 0.17 lb pyraclostrobin, 0.087 lb fluxapyroxad)
per acre per application.
• DO NOT make more than 2 applications at 15 fl ozs per acre per year.
• DO NOT apply more than 30 fl ozs (0.25 lb mefentrifluconazole, 0.35 lb pyraclostrobin, 0.17 lb fluxapyroxad) per
acre per year.
• DO NOT apply more than a cumulative total of 0.25 lb ai/acre/year of mefentrifluconazole-containing products.
• DO NOT apply more than a cumulative total of 0.78 lb ai/acre/year of pyraclostrobin-containing products.
• DO NOT apply more than a cumulative total of 0.27 lb ai/acre/year of fluxapyroxad-containing products.
• DO NOT apply this product to sugarcane through any type of irrigation system.
• DO NOT feed treated sugarcane commodities to livestock.
• Aerial Application - DO NOT use less than 5 gallons of spray solution per acre. RevytekTM fungicide can
be applied by ground or air.

13

SUGARCANE ONLY Infurrow and Soil-directed Banded Rates
Rate per
1000 Row Feet
(fl ozs product)
Product Rate
(fl ozs/A)
Row Width (feet)
5 feet 6 feet
1.26 11.0
1.38 12.0
1.49 13.0
1.52 11.0
1.61 14.0
1.65 12.0
1.72 15.0
1.79 13.0
1.93 14.0
2.07 15.0

14

Conditions of Sale and Warranty
The Directions For Use of this product reflect the
opinion of experts based on field use and tests. The
directions are believed to be reliable and must be
followed carefully. However, it is impossible to
eliminate all risks inherently associated with the use of
this product. Crop injury, ineffectiveness or other
unintended consequences may result because of such
factors as weather conditions, presence of other
materials, or use of the product in a manner
inconsistent with its labeling, all of which are beyond
the control of BASF CORPORATION (“BASF”) or the
Seller. To the extent consistent with applicable law, all
such risks shall be assumed by the Buyer.
BASF warrants that this product conforms to the
chemical description on the label and is reasonably fit
for the purposes referred to in the Directions For
Use, subject to the inherent risks, referred to above.
TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, BASF MAKES NO OTHER EXPRESS OR
IMPLIED WARRANTY OF FITNESS OR
MERCHANTABILITY OR ANY OTHER EXPRESS
OR IMPLIED WARRANTY.
TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, BUYER’S EXCLUSIVE REMEDY AND
BASF’S EXCLUSIVE LIABILITY, WHETHER IN
CONTRACT, TORT, NEGLIGENCE, STRICT
LIABILITY, OR OTHERWISE, SHALL BE LIMITED
TO REPAYMENT OF THE PURCHASE PRICE OF
THE PRODUCT.
TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, BASF AND THE SELLER DISCLAIM ANY
LIABILITY FOR CONSEQUENTIAL, EXEMPLARY,
SPECIAL OR INDIRECT DAMAGES RESULTING
FROM THE USE OR HANDLING OF THIS
PRODUCT.
BASF and the Seller offer this product, and the Buyer
and User accept it, subject to the foregoing
Conditions of Sale and Warranty which may be
varied only by agreement in writing signed by a duly
authorized representative of BASF.
1108


Revytek is a trademark of BASF.


© 2020 BASF Corporation
All rights reserved.

007969-00406.20200730b.NVA 2020-04-562-0148
Based on: NVA 2020-04-562-0139

BASF Corporation
26 Davis Drive
Research Triangle Park, NC 27709