crop-chem-docs/corpus/epa_ppls/100-1093.md

# HERITAGE FUNGICIDE

- EPA Reg No: **100-1093**
- Registrant: SYNGENTA CROP PROTECTION, LLC
- Signal word: Caution
- Active ingredients: Azoxystrobin (50%)
- Label accepted: 2025-07-28
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000100-01093-20250728.pdf

---
July 28, 2025
Monique Inforzato
Monique.Inforzato@syngenta.com
SYNGENTA CROP PROTECTION, LLC
Subject: Non-PRIA (Pesticide Registration Improvement Act) Labeling Amendment - Revise label and
add azoxystrobin registration review
Product Name: HERITAGE FUNGICIDE
Admin Number: 100-1093
EPA Receipt Date: 11/10/2017
Action Case Number: 00605744
Dear Monique Inforzato:
The amended labeling referred to above, submitted in connection with registration under the Federal
Insecticide, Fungicide, and Rodenticide Act, as amended, is acceptable.
This approval does not affect any terms or conditions that were previously imposed on this registration. You
continue to be subject to existing terms or conditions on your registration and any deadlines connected with
them.
A stamped copy of your labeling is enclosed for your records. This labeling supersedes all previously
accepted labeling. You must submit one (1) copy of the final printed labeling before you release this product
for shipment with the new labeling. In accordance with 40 CFR § 152.130(c), you may distribute or sell this
product under the previously approved labeling for 18 months from the date of this letter. After 18 months, you
may only distribute or sell this product if it bears this new revised labeling or subsequently approved labeling.
“To distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR § 152.3.
Should you wish to add/retain a reference to your company’s website on your label, then please be aware that
the website becomes labeling under FIFRA and is subject to review by EPA. If the website is false or
misleading, the product will be considered to be misbranded and sale or distribution of the product is unlawful
under FIFRA section 12(a)(1)(E). 40 CFR § 156.10(a)(5) lists examples of statements the EPA may consider
false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims
made on the website may not substantially differ from those claims approved through the registration process.
Therefore, should the EPA find or if it is brought to our attention that a website contains statements or claims
substantially differing from statements or claims made in connection with obtaining a FIFRA section 3
registration, the website will be referred to the EPA’s Office of Enforcement and Compliance Assurance.
Your release for shipment of this product constitutes acceptance of these terms. If these terms are not
complied with, this registration will be subject to cancellation in accordance with FIFRA section 6.

If you have questions, please contact Elizabeth Andrews via email at andrews.elizabeth@epa.gov.
Sincerely,
Kable Bo Davis, Senior Advisor 
FB, RD
Office of Pesticide Programs
Kable Bo Davis

Heritage Fungicide 
Page 1 
[MASTER] 
 
AZOXYSTROBIN GROUP 11 FUNGICIDE 
 
 
Heritage
® Fungicide 
 
Broad-spectrum fungicide for the prevention and control of diseases of turf and 
ornamentals, and fruit and nut trees, and vegetable and herb plants for retail sale to 
consumers. 
 
Active Ingredient: 
Azoxystrobin: methyl (E)-2-{2-[6-(2-cyanophenoxy) 
pyrimidin-4-yloxy]phenyl}-3-methoxyacrylate* ................................................. 50% 
Other Ingredients: ........................................................................................... 50% 
Total: ............................................................................................................. 100% 
 
Heritage Fungicide is a water-dispersible granule (WG) containing 0.5 lb azoxystrobin 
per lb product. 
*IUPAC 
 
 
KEEP OUT OF REACH OF CHILDREN. 
 
CAUTION 
 
See additional precautionary statements and directions for use inside booklet. 
 
Reformulation is prohibited. See individual container labels for repackaging limitations. 
 
EPA Reg No. 100-1093 
 
EPA Est. 
 
 
 
__________ 
Net Contents 
 
 
07/28/2025
100-1093

Heritage Fungicide 
Page 2 
FIRST AID 
If on skin or 
clothing 
• Take off contaminated clothing. 
• Rinse skin immediately with plenty of water for 15-20 minutes. 
• Call a poison control center or doctor for treatment advice. 
If in eyes • Hold eye open and rinse slowly and gently with water for 15-20 
minutes. 
• Remove contact lenses, if present, after the first 5 minutes, then 
continue rinsing eye. 
• Call a poison control center or doctor for treatment advice. 
Have the product container or label with you when calling a poison control center or 
doctor, or going for treatment. 
SYNGENTA HOTLINE NUMBER 
For 24-Hour Medical Emergency Assistance (Human or Animal) or 
Chemical Emergency Assistance (Spill, Leak, Fire, or Accident), 
Call 
1-800-888-8372 
 
 
PRECAUTIONARY STATEMENTS 
 
Hazards to Humans and Domestic Animals 
 
CAUTION 
 
HARMFUL IF ABSORBED THROUGH SKIN. CAUSES MODERATE EYE IRRITATION. 
Avoid contact with skin, eyes or clothing. Wash thoroughly with soap and water after 
handling and before eating, drinking, chewing gum, using tobacco or using the toilet. 
Remove and wash contaminated clothing before reuse. 
 
Personal Protective Equipment (PPE) 
 
Applicators and other handlers must wear: 
 
• Long-sleeved shirt and long pants 
• Chemical-resistant gloves made of polyvinyl chloride, nitrile rubber or butyl rubber 
• Shoes plus socks

Heritage Fungicide 
Page 3 
In addition, 
• Mixers/loaders supporting aerial or chemigation applications must wear a 
minimum of a NIOSH-approved particulate filtering facepiece respirator with any 
N, R, or P filter; OR a NIOSH-approved elastomeric particulate respirator with 
any N, R, or P filter; OR a NIOSH-approved powered air purifying respirator with 
HE filters. 
 
• Mixers/loaders supporting groundboom applications must wear a minimum of a 
NIOSH-approved particulate filtering facepiece respirator with any N, R, or P 
filter; OR a NIOSH-approved elastomeric particulate respirator with any N, R, or 
P filter; OR a NIOSH-approved powered air purifying respirator with HE filters. 
 
• Mixers/loaders/applicators using mechanically pressurized handwands, except 
when applying to Christmas tree farms, nursery ornamentals, landscaping, must 
wear a minimum of a NIOSH-approved particulate filtering facepiece respirator 
with any N, R, or P filter; OR a NIOSH-approved elastomeric particulate 
respirator with any N, R, or P filter; OR a NIOSH-approved powered air purifying 
respirator with HE filters 
 
Respirator fit testing, medical qualification, and training 
Using a program that conforms to OSHA’s requirements (see 29 CFR Part 1910.134), 
employers must verify that any handler who uses a respirator is: 
• Fit-tested and fit-checked, 
• Trained, and 
• Examined by a qualified medical practitioner to ensure physical ability to safely 
wear the style of respirator to be worn. A qualified medical practitioner is a 
physician or other licensed health care professional who will evaluate the ability 
of a worker to wear a respirator. The initial evaluation consists of a questionnaire 
that asks about medical conditions (such as a heart condition) that would be 
problematic for respirator use. If concerns are identified, then additional 
evaluations, such as a physical exam, might be necessary. The initial evaluation 
must be done before respirator use begins. Handlers must be reexamined by a 
qualified medical practitioner if their health status or respirator style or use-
conditions change. 
 
Upon request by local/state/federal/tribal enforcement personnel, employers must 
provide documentation demonstrating how they have complied with these requirements. 
 
User Safety Requirements 
 
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions 
for washables exist, use detergent and hot water. Keep and wash PPE separately from 
other laundry. 
 
Engineering Controls

Heritage Fungicide 
Page 4 
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets 
the requirements listed in the Worker Protection Standard (WPS) for agricultural 
pesticides (40 CFR 170.240 (d)(4-6), the handler PPE requirements may be reduced or 
modified as specified in the WPS. Human flagging is prohibited. 
 
IMPORTANT: When reduced PPE is worn because a closed system is being used, 
handlers must be provided all PPE specified above for “applicators and other handlers” 
and have such PPE immediately available for use in an emergency, such as a spill or 
equipment breakdown. 
 
User Safety Recommendations 
Users should: 
• Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. 
Wash thoroughly with soap and water after handling. 
• Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly 
and put on clean clothing. 
• Remove PPE immediately after handling this product. Wash the outside of gloves 
before removing. As soon as possible, wash thoroughly and change into clean 
clothing. 
 
Environmental Hazards 
 
This pesticide is toxic to freshwater and estuarine/marine fish and aquatic invertebrates. 
Azoxystrobin can be persistent for several months or longer. Do not apply directly to 
water, or to areas where surface water is present, or to intertidal areas below the mean 
high-water mark. Drift and runoff may be hazardous to aquatic organisms in 
neighboring areas. Do not contaminate water when disposing of equipment wash water 
or rinsate. 
 
Groundwater Advisory 
 
Azoxystrobin and a degradate of azoxystrobin are known to leach through soil to 
groundwater under certain conditions as a result of label use. This chemical may leach 
into groundwater if used in areas where soils are permeable, particularly where the 
water table is shallow.

Heritage Fungicide 
Page 5 
Surface Water Advisory 
 
This product may impact surface water quality due to run-off of rain water. This is 
especially true for poorly draining soils and soils with shallow groundwater. This 
product is classified as having a high potential for reaching surface water via run-off for 
several months or more after application. A level, well-maintained vegetative buffer 
strip between areas to which this product is applied and surface water features, such as 
ponds, streams and springs, will reduce the potential loading of azoxystrobin and a 
degradate of azoxystrobin from run-off water and sediment. Run-off of this product also 
will be reduced by avoiding applications when rainfall or irrigation is expected to occur 
within 48 hours. 
 
Notify state and/or Federal authorities and Syngenta immediately if you observe any 
adverse environmental effects due to use of this product.

Heritage Fungicide 
Page 6 
CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY 
 
NOTICE: Read the entire Directions for Use and Conditions of Sale and Limitation of 
Warranty and Liability before buying or using this product. If the terms are not 
acceptable, return the product at once, unopened, and the purchase price will be 
refunded. 
 
The Directions for Use of this product must be followed carefully. It is impossible to 
eliminate all risks inherently associated with the use of this product. Crop injury, 
ineffectiveness or other unintended consequences may result because of such factors as 
manner of use or application, weather or crop conditions, presence of other materials or 
other influencing factors in the use of the product, which are beyond the control of 
SYNGENTA CROP PROTECTION, LLC or Seller. To the extent permitted by applicable 
law, Buyer and User agree to hold SYNGENTA and Seller harmless for any claims 
relating to such factors. 
 
SYNGENTA warrants that this product conforms to the chemical description on the label 
and is reasonably fit for the purposes stated in the Directions for Use, subject to the 
inherent risks referred to above, when used in accordance with directions under normal 
use conditions. To the extent permitted by applicable law: (1) this warranty does not 
extend to the use of the product contrary to label instructions or under conditions not 
reasonably foreseeable to or beyond the control of Seller or SYNGENTA, and (2) Buyer 
and User assume the risk of any such use. TO THE EXTENT PERMITTED BY 
APPLICABLE LAW, SYNGENTA MAKES NO WARRANTIES OF MERCHANTABILITY 
OR OF FITNESS FOR A PARTICULAR PURPOSE NOR ANY OTHER EXPRESS OR 
IMPLIED WARRANTY EXCEPT AS WARRANTED BY THIS LABEL. 
 
To the extent permitted by applicable law, in no event shall SYNGENTA be liable for 
any incidental, consequential or special damages resulting from the use or handling of 
this product. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THE 
EXCLUSIVE REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY 
OF SYNGENTA AND SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES 
OR DAMAGES (INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, 
CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) 
RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, SHALL BE THE 
RETURN OF THE PURCHASE PRICE OF THE PRODUCT OR, AT THE ELECTION 
OF SYNGENTA OR SELLER, THE REPLACEMENT OF THE PRODUCT. 
 
SYNGENTA and Seller offer this product, and Buyer and User accept it, subject to the 
foregoing Conditions of Sale and Limitation of Warranty and Liability, which may not be 
modified except by written agreement signed by a duly authorized representative of 
SYNGENTA.

Heritage Fungicide 
Page 7 
DIRECTIONS FOR USE 
 
It is a violation of Federal Law to use this product in a manner inconsistent with its 
labeling. 
 
FAILURE TO FOLLOW THE USE DIRECTIONS AND PRECAUTIONS ON THIS 
LABEL MAY RESULT IN PLANT INJURY OR POOR DISEASE CONTROL. 
 
DO NOT apply this product in a way that will contact workers or other persons, either 
directly or through drift. Only protected handlers may be in the area during application. 
For any requirements specific to your State or Tribe, consult the agency responsible for 
pesticide regulation. 
 
 
AGRICULTURAL USES 
 
Use to prevent and control diseases of: turf produced on sod farms; and ornamentals, 
fruit and nut trees, and vegetable and herb plants grown for retail sale to consumers. 
 
AGRICULTURAL USE REQUIREMENTS 
 
Use this product only in accordance with its labeling and with the Worker Protection 
Standard, 40 CFR Part 170. This Standard contains requirements for the protection of 
agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of 
agricultural pesticides. It contains requirements for training, decontamination, 
notification, and emergency assistance. It also contains specific instructions and 
exceptions pertaining to the statements on this label about personal protective 
equipment (PPE), notification to workers, and restricted-entry interval. The 
requirements in this box only apply to uses of this product that are covered by the 
Worker Protection Standard. 
 
Do not enter or allow worker entry into treated areas during the restricted-entry 
interval (REI) of 4 hours. 
 
PPE required for early entry to treated areas that is permitted under the Worker 
Protection Standard and that involves contact with anything that has been treated, such 
as plants, soil or water is: 
• Coveralls 
• Chemical-resistant gloves made of polyvinyl chloride, nitrile rubber or butyl 
rubber 
• Shoes plus socks

Heritage Fungicide 
Page 8 
NON-AGRICULTURAL USES 
 
Use to prevent and control diseases of turf and ornamentals on golf courses, lawns and 
landscape areas around residential, institutional, public, commercial and industrial 
buildings, parks, recreational areas and athletic fields. 
 
NON-AGRICULTURAL USE REQUIREMENTS 
 
The requirements in this box apply to uses of this product that are NOT within the scope 
of the Worker Protection Standard for agricultural pesticides (40 CFR Part 170). The 
WPS applies when this product is used to produce agricultural plants on farms, forests, 
nurseries, or greenhouses. The area being treated must be vacated by unprotected 
persons. 
 
Do not treat areas while unprotected humans or domestic animals are present in the 
treatment areas. Because certain states may require more restrictive reentry intervals, 
consult your State Department of Agriculture for further information. 
 
Do not allow entry into treatment area until area that was treated with Heritage 
Fungicide is dry. 
 
 
PRODUCT INFORMATION 
 
Heritage Fungicide is a broad-spectrum, systemic fungicide that prevents or controls the 
listed pathogens that cause foliar, stem, and root diseases, including leaf and stem 
blights, leaf spots, patch diseases, mildews, anthracnose, fairy rings, molds, and rusts 
of turfgrass, ornamentals, vegetables, and herbs. Heritage Fungicide may be applied in 
alternating application programs or in tank mixes with other registered plant protection 
products. All applications must be made according to the use directions that follow. 
 
Heritage Fungicide is a member of Syngenta’s Plant Performance™ product line that 
can improve plant vigor and quality. The additional benefits are due to positive effects 
on plant physiology, which can vary according to plant species and growing 
environment. 
 
 
USE RESTRICTIONS 
 
DO NOT apply more than 10 lb of Heritage Fungicide (5 lb ai) per acre per year to crops 
grown outdoors. 
 
DO NOT apply more than 1.1 lb of Heritage Fungicide (0.55 lb ai) per acre per 
application. 
 
DO NOT graze or feed clippings from treated turf areas to animals.

Heritage Fungicide 
Page 9 
PHYTOTOXICITY 
 
Heritage Fungicide is highly phytotoxic to apple and certain crabapple and flowering 
cherry varieties. Use caution to prevent injury to these trees. 
 
DO NOT use spray equipment that has been used to apply Heritage Fungicide to spray 
apple, crabapple or flowering cherry trees. Even trace amounts can cause 
unacceptable phytotoxicity in certain varieties. 
 
DO NOT apply Heritage Fungicide where spray drift may reach apple, crabapple, or 
flowering cherry trees. 
 
DO NOT apply when weather conditions favor drift from treated areas to a non-target 
aquatic habitat. 
 
 
SPRAY DRIFT MANAGEMENT 
 
 
 
 
SPRAY DRIFT 
 
Aerial Applications: 
• Do not release spray at a height greater than 10 ft above the ground or crop canopy, 
unless a greater application height is necessary for pilot safety. 
• Applicators are required to select nozzles that deliver Medium to coarse spray 
droplets in accordance with ASABE Standard S-572.1. 
• Do not apply when wind speeds exceed 15 mph at the application site. If the 
windspeed is greater than 10 mph, the boom length must be 65% or less of the 
wingspan for fixed wing aircraft and 75% or less of the rotor diameter for helicopters. 
Otherwise, the boom length must be 75% or less of the wingspan for fixed-wing 
aircraft and 90% or less of the rotor diameter for helicopters. 
• Applicators must use ½ swath displacement upwind at the downwind edge of the 
field. 
• Do not apply during temperature inversions. 
 
 
Groundboom Applications: 
• User must only apply with the release height recommended by the manufacturer, but 
no more than 4 ft above the ground or crop canopy. 
• Applicators are required to use a medium or coarser droplet size (ASABE S572.1). 
• Do not apply when wind speeds exceed 15 mph at the application site. 
• Do not apply during temperature inversions.

Heritage Fungicide 
Page 10 
SPRAY DRIFT ADVISORIES 
 
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT. 
BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL 
CONDITIONS. 
 
IMPORTANCE OF DROPLET SIZE 
An effective way to reduce spray drift is to apply large droplets. Use the largest droplets 
that provide target pest control. While applying larger droplets will reduce spray drift, 
the potential for drift will be greater if applications are made improperly or under 
favorable environmental conditions. 
 
Controlling Droplet Size – Ground Boom 
• Volume – Increasing the spray volume so that larger droplets are produced will 
reduce spray drift. Use the highest practical spray volume for the application. If 
greater spray volume is needed, consider using a nozzle with a higher flow rate. 
• Pressure – Use the lowest spray pressure recommended for the nozzle to 
produce the target spray volume and droplet size. 
• Spray Nozzle – Use a spray nozzle that is designed for the intended application. 
Consider using nozzles designed to reduce drift. 
 
Controlling Droplet Size – Aircraft 
• Adjust Nozzles – Follow nozzle manufacturers’ recommendations for setting up 
nozzles. Generally, to reduce fine droplets, nozzles should be oriented parallel 
with the airflow in flight. 
 
BOOM HEIGHT – Ground Boom 
For ground equipment, the boom should remain level with the crop and have minimal 
bounce. 
 
RELEASE HEIGHT – Aircraft 
Higher release heights increase the potential for spray drift. 
 
SHIELDED SPRAYERS 
Shielding the boom or individual nozzles can reduce spray drift. Consider using 
shielded sprayers. Verify that the shields are not interfering with the uniform deposition 
of the spray on the target area. 
 
TEMPERATURE AND HUMIDITY 
When making applications in hot and dry conditions, use larger droplets to reduce 
effects of evaporation. 
 
TEMPERATURE INVERSIONS 
Drift potential is high during a temperature inversion. Temperature inversions are 
characterized by increasing temperature with altitude and are common on nights with 
limited cloud cover and light to now wind. The presence of an inversion can be

Heritage Fungicide 
Page 11 
indicated by ground fog or by the movement of smoke from a ground source or an 
aircraft smoke generator. Smoke that layers and moves laterally in a concentrated 
cloud (under low wind conditions) indicates an inversion, while smoke that moves 
upward and rapidly dissipates indicates good vertical air mixing. Avoid applications 
during temperature inversions. 
 
WIND 
Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING 
GUSTY WIND CONDITIONS. Applicators need to be familiar with local wind patterns 
and terrain that could affect spray drift. 
 
 
AVOIDING SPRAY DRIFT IS THE RESPONSIBILITY OF THE APPLICATOR. 
 
INTEGRATED PEST (DISEASE) MANAGEMENT (IPM) 
 
Heritage Fungicide should be integrated into an overall disease and pest management 
strategy whenever the use of a fungicide is required. Cultural practices known to 
reduce disease development, such as planting of resistant cultivars, removal of plant 
debris to reduce inoculum, and water management, should be followed. The following 
sections in this label identify specific IPM recommendations for each crop. Consult your 
local agricultural, turf and ornamental authorities for additional IPM strategies 
established for your area. Heritage Fungicide may be used in State Agricultural 
Extension advisory (disease forecasting) programs that recommend application timing 
based on environmental factors favorable for disease development.

Heritage Fungicide 
Page 12 
RESISTANCE MANAGEMENT 
 
For resistance management, Heritage Fungicide contains a Group 11/[azoxystrobin] 
fungicide. Any fungal population may contain individuals naturally resistant to Heritage 
Fungicide and other Group 11 fungicides. A gradual or total loss of pest control may 
occur over time if these fungicides are used repeatedly in the same fields. Appropriate 
resistance management strategies should be followed. 
 
To delay fungicide resistance, take one or more of the following steps: 
 
• Rotate the use of Heritage Fungicide or other Group 11 fungicides within a growing 
season sequence with different groups that control the same pathogens. 
• Use tank mixtures with fungicides from a different group that are equally effective on 
the target pest when such use is permitted. Use at least the minimum application 
rate as labeled by the manufacturer. 
• Adopt an integrated disease management program for fungicide use that includes 
scouting, uses historical information related to pesticide use, and which considers 
host plant resistance, impact of environmental conditions on disease development, 
disease thresholds, as well as cultural, biological and other chemical control 
practices. 
• Where possible, make use of predictive disease models to effectively time fungicide 
applications. Note that using predictive models alone is not sufficient to manage 
resistance. 
• Monitor treated fungal populations for resistance development. 
• Contact your local Syngenta Representative, retailer, or extension specialist for any 
additional pesticide resistance-management and/or IPM recommendations for 
specific crops and pathogens. 
• For further information or to report suspected resistance contact Syngenta at 1-866-
Syngent(a) (866-796-4368). You can also contact your pesticide distributor or 
university extension specialist to report resistance. 
 
Since pathogens differ in their potential to develop fungicide resistance, use the 
resistance management strategies for each disease given in the SPECIFIC USE 
DIRECTIONS section in this label. 
 
Syngenta Crop Protection encourages responsible resistance management to ensure 
effective long-term control of the fungal diseases on this label. 
 
MIXING INSTRUCTIONS 
 
To prepare spray solution, partially fill the spray tank with clean water and begin 
agitation. Add the specified amount of Heritage Fungicide to the tank, allowing 
adequate time for good mixing. Add an adjuvant if appropriate. Finish filling the tank to 
the desired volume to obtain the proper spray concentration. Maintain agitation 
throughout the spraying operation. DO NOT allow spray mixture to stand overnight or

Heritage Fungicide 
Page 13 
for prolonged periods. Mix only the amount of spray required for your immediate use. 
Sprayers should be thoroughly cleaned immediately after application. 
 
Heritage Fungicide is compatible with commonly used fungicides, liquid fertilizers, 
herbicides, insecticides and biological control products. If tank mixes are desired, 
products should be added to the spray tank in the following order: Heritage Fungicide, 
other WG or dry flowable formulations, wettable powders and flowable (aqueous 
suspension) products. Observe all directions, precautions, and limitations on labeling of 
all products used. Consult compatibility charts or your local or state agricultural or turf 
authorities for compatibility information. 
 
Adjuvants: When an adjuvant is to be used with this product, use an adjuvant that 
meets the standards of the Chemical Producers and Distributors Association (CPDA) 
adjuvant certification program. 
 
DO NOT mix Heritage Fungicide in the spray tank with pesticides, surfactants or 
fertilizers unless compatibility charts or your own prior use has shown that the 
combination is physically compatible, effective and non-injurious under your conditions 
of use. If physical compatibility is unknown, the following procedure should be followed: 
Pour the specified proportions of the products into a suitable container of water, mix 
thoroughly and allow it to stand at least 20 minutes. If the combination remains mixed 
or can be re-mixed readily, the mixture is considered physically compatible. 
 
Heritage Fungicide is incompatible with many fertilizers when low water volumes are 
used for in-furrow applications. Cold temperatures and water quality exacerbate these 
compatibility problems. Conduct a physical compatibility test as described in the 
paragraph as above before making a field application. 
 
NOTE: Heritage Fungicide has demonstrated some phytotoxic effects when mixed with 
products that are formulated as EC’s. These effects are enhanced if applications are 
made under cool, cloudy conditions and these conditions remain for several days 
following application. In addition, silicone-containing adjuvants have also contributed to 
phytotoxicity. 
 
 
APPLICATION INSTRUCTIONS 
 
Heritage Fungicide should be applied prior to disease development at the rates and 
timings given in this label. Apply at the higher rates in the rate range and/or shorter 
spray intervals under conditions of heavy infection pressure, on highly susceptible 
varieties or when environmental conditions are conducive for disease development. 
Use of Heritage Fungicide as a "rescue" (late curative or eradicant) treatment is not 
recommended and may not give satisfactory disease control. 
 
Heritage Fungicide may be applied with various types of spray equipment commonly 
used for making ground and aerial applications. For ground applications, apply

Heritage Fungicide 
Page 14 
Heritage Fungicide in a volume of water sufficient to provide good plant canopy 
penetration and coverage. For aerial applications, apply Heritage Fungicide in a 
minimum of two gallons of water per acre. Ground application is preferred as it typically 
provides better canopy penetration and coverage. 
 
Proper adjustments and calibration of spraying equipment are essential for optimal 
disease control. If you have questions about calibration, contact a State Extension 
Service specialist, the equipment manufacturer or other experts. 
 
Directions for Use through Sprinkler and Drip Chemigation Systems 
 
Spray Preparation: Chemical tank and injector system should be thoroughly cleaned. 
Flush system with clean water. 
 
Use Precautions for Sprinkler and Drip Irrigation Applications: 
 
Drip and Micro Irrigation: Heritage Fungicide may be applied through drip and micro 
irrigation systems to potted ornamentals or to bedded, field-grown ornamentals for soil-
borne disease control. The soil or potting media should have adequate moisture 
capacity prior to drip application. 
 
Terminate drip irrigation at fungicide depletion from the main feed supply tank or after 6 
hours from start, whichever is shorter. For maximum efficacy, subsequent irrigation 
(water only) should be delayed for at least for 24 hours following drip application. 
 
Sprinkler Irrigation: Apply this product through sprinkler irrigation systems including 
center pivot, motorized boom, lateral move, end tow, side [wheel] roll, traveler, big gun, 
solid set, or hand move irrigation systems. Do not apply this product through any other 
type of irrigation system except as specified on this label. 
 
Apply with center-pivot or continuous-move equipment distributing ½ acre-inch or less 
during treatment. In general, use the least amount of water required for proper 
distribution and coverage. If stationary systems (solid set, handlines or wheel lines 
other than continuous-move) are used, this product should be injected into no more 
than the last 20-30 minutes of the set. DO NOT apply when winds are greater than 10-
15 mph to avoid drift or wind skips. Plant injury, lack of effectiveness, or illegal pesticide 
residues in the crop can result from non-uniform treated water. Thorough coverage of 
foliage is required for good control. Good agitation should be maintained during the 
entire application period. 
 
If you have questions about calibration, contact the State Extension Service specialist, 
equipment manufacturers or other experts. 
 
• The system must contain a functional check valve, vacuum relief valve, and low 
pressure drain appropriately located on the irrigation pipeline to prevent water-
source contamination from backflow.

Heritage Fungicide 
Page 15 
 
• The pesticide injection pipeline must contain a functional, automatic, quick-
closing check valve to prevent the flow of fluid back toward the injection pump. 
 
• The pesticide injection pipeline must also contain a functional, normally closed, 
solenoid-operated valve located on the intake side of the injection pump and 
connected to the system interlock to prevent fluid from being withdrawn from the 
supply tank when the irrigation system is either automatically or manually shut 
down. 
 
• The system must contain functional interlocking controls to automatically shut off 
the pesticide injection pump when the water pump motor stops. 
 
• The irrigation line or water pump must include a functional pressure switch which 
will stop the water pump motor when the water pressure decreases to the point 
where pesticide distribution is adversely affected. 
 
• Systems must use a metering pump, such as a positive displacement injection 
pump (e.g., diaphragm pump) effectively designed and constructed of materials 
that are compatible with pesticides and capable of being fitted with a system 
interlock. 
 
Allow sufficient time for pesticide to be flushed through all lines and all nozzles before 
turning off irrigation water. A person knowledgeable of the chemigation system and 
responsible for its operation, or under the supervision of the responsible person, shall 
shut the system down and make necessary adjustments should the need arise. 
 
DO NOT connect an irrigation system (including greenhouse systems) used for 
pesticide application to a public water system unless the pesticide label-prescribed 
safety devices for public water systems are in place. 
 
Specific Instructions for Public Water Systems 
 
1. Public water system means a system for the provision to the public of piped water 
for human consumption if such system has at least 15 service connections or 
regularly serves an average of at least 25 individuals daily at least 60 days out of 
the year. 
 
2. Chemigation systems connected to public water systems must contain a functional, 
reduced-pressure zone, back-flow preventer (RPZ) or the functional equivalent in 
the water supply line upstream from the point of pesticide introduction. As an 
option to the RPZ, the water from the public water system should be discharged 
into a reservoir tank prior to pesticide introduction. There must be a complete 
physical break (air gap) between the outlet end of the fill pipe and the top or 
overflow rim of the reservoir tank of at least twice the inside diameter of the fill 
pipe.

Heritage Fungicide 
Page 16 
 
3. The pesticide injection pipeline must contain a functional, automatic, quick-closing 
check valve to prevent the flow of fluid back toward the injection pump. 
 
4. The pesticide injection pipeline must contain a functional, normally closed, 
solenoid-operated valve located on the intake side of the injection pump and 
connected to the system interlock to prevent fluid from being withdrawn from the 
supply tank when the irrigation system is either automatically or manually shut 
down. 
 
5. The system must contain functional interlocking controls to automatically shut off 
the pesticide injection pump when the water pump motor stops, or in cases where 
there is no water pump, when the water pressure decreases to the point where 
pesticide distribution is adversely affected. 
 
6. Systems must use a metering pump, such as a positive displacement injection 
pump (e.g., diaphragm pump) effectively designed and constructed of materials 
that are compatible with pesticides and capable of being fitted with a system 
interlock. 
 
7. Do not apply when wind speed favors drift beyond the area intended for treatment.

Heritage Fungicide 
Page 17 
DIRECTIONS FOR TURF 
 
Heritage Fungicide controls the listed pathogens that cause foliar, stem, and root 
diseases, including leaf and stem blights, leaf spots, patch diseases, mildew, molds and 
rusts of turfgrass. Heritage Fungicide may be used on golf courses, lawns and 
landscape areas around residential, institutional, public, commercial and industrial 
buildings, parks, recreational areas, athletic fields, and sod farms. 
 
Integrated Pest (Disease) Management (IPM) 
 
Sound turf management resulting in healthy, vigorous turf is the foundation of a good 
IPM program. Cultural practices, such as proper choice of turf variety, nutrient 
management, proper cutting height, thatch management, and proper watering, 
drainage, and moisture stress management, should be integrated with the use of 
fungicides to increase turf vigor and reduce the susceptibility to disease. Immunoassay 
detection kits and extension service diagnostic services can assist in the early and 
accurate identification of causal organisms and corresponding selection of the proper 
fungicide when required. 
 
Resistance Management 
 
DO NOT spray more than two sequential Heritage Fungicide applications for Gray Leaf 
Spot or Pythium spp. control. For all other diseases when Gray Leaf Spot and Pythium 
spp. are not present, DO NOT spray more than three sequential applications of Heritage 
Fungicide. 
 
Application Directions 
 
Heritage Fungicide should be applied prior to disease development. Mix Heritage 
Fungicide with the required amount of water and apply as a dilute spray in 2-4 gallons of 
water per 1,000 square feet (87-174 gallons per acre). Repeat applications at specified 
intervals. For spot treatments, use 0.2 oz of Heritage Fungicide per 1-3 gallons of 
water. 
 
 
TURF USE RESTRICTIONS 
 
 
DO NOT apply more than 10 lb of Heritage Fungicide/Acre (5 lb ai/Acre) per year to 
crops grown outdoors. 
 
For applications with handheld equipment, DO NOT exceed 0.0025 lb ai/gal. 
 
For applications with mechanically pressurized handwand equipment to golf course 
(tees, greens, fairways) or landscaping turf, DO NOT exceed 0.95 lb ai/A.

Heritage Fungicide 
Page 18 
Aerial and/or chemigation application to sod is prohibited 
 
DO NOT apply to golf course turf by air. 
 
 
Soil Injection Application 
 
Heritage Fungicide may be applied through a liquid fungicide injector for the control of 
ectrotrophic root diseases such as summer patch and take-all patch. Use Heritage 
Fungicide only in liquid injection equipment specifically designated for pesticide use. 
 
Apply Heritage Fungicide at 0.2 to 0.4 oz per 1,000 sq ft. Spray carrier volume should 
fall within 30-150 gallons of water per 1,000 sq ft. Use an injection hole spacing of 1 
inch by 1 inch for optimum control. Do not exceed injection depth of 2 inches. Use a 
one-inch depth for optimum results. Application timing should follow disease control 
strategies used for normal broadcast spray programs. 
 
Application when Establishing Turfgrass from Seed or in Overseeding of Dormant 
Turfgrass 
 
Heritage Fungicide may be used for control of certain turfgrass diseases associated 
with turfgrass establishment from seed or during overseeding of dormant turfgrass. 
Heritage Fungicide may be safely applied before or after seeding or at seedling 
germination and emergence to ryegrass, bentgrass, bluegrass (including Poa trivialis), 
and fescue turfgrass types. Optimum application timing is during seeding. See 
Application Directions section. 
 
Dollar Spot: Heritage Fungicide does not control dollar spot. Mix Heritage Fungicide 
with another fungicide labeled for dollar spot control when environmental conditions are 
conducive for disease development. Heritage Fungicide is tank-mix compatible with 
many fungicides that control dollar spot. 
 
TABLE 1: 
Directions for Application for Turf Diseases 
 
Target Diseases 
Use Rate 
(oz product/ 
1,000 sq ft) 
Application 
Interval 
(days) Application Instructions* 
Anthracnose 
(Colletotrichum cereale) 
0.2-0.4 14-28 Use preventatively. Begin applications when 
conditions are favorable for disease infection, 
prior to disease symptom development. 
Take-all root rot 
Bermudagrass Decline 
(Gaeumannomyces 
spp.) 
0.4 28 Use preventatively. Begin applications when 
conditions are favorable for disease infection 
prior to disease symptom development. 
Brown Patch 
(Rhizoctonia solani) 
0.2-0.4 14-28 Apply when conditions are favorable for 
disease development.

Heritage Fungicide 
Page 19 
Target Diseases 
Use Rate 
(oz product/ 
1,000 sq ft) 
Application 
Interval 
(days) Application Instructions* 
Brown Ring Patch 
(Waitea circinata) 
0.2-0.4 14-28 Apply when conditions are favorable for 
disease development 
Yellow Patch 
(Rhizoctonia cerealis) 
0.2-0.4 14-28 Make one or two applications in fall or when 
conditions are favorable for disease 
development. 
 
Fairy Ring 
(Lycoperdon spp., 
Agrocybe pediades, 
Arachnion spp., Bovista 
spp., and Vascellum 
spp.) 
 
0.4 
 
28 
 
Apply preventatively or as soon as possible 
after fairy ring symptoms develop. Add the 
specified rate of a wetting agent to the final 
spray and water-in immediately with 1/8 to 1/4 
inches irrigation. Fairy ring symptoms may 
take 2 to 3 weeks to disappear following 
curative application. Reapplication after 28 
days may be required in some cases. 
Severely damaged or thin turf may require 
reseeding. 
Microdochium Patch 
(Monographella nivalis) 
0.2-0.4 14-28 Use preventatively. Begin applications when 
conditions are favorable for disease infection, 
prior to disease symptom development. 
Gray Leaf Spot 
(Pyricularia oryzae) 
0.2-0.4 14-28 Begin applications before disease is present 
and continue applications while conditions are 
favorable for disease development. 
Gray Snow Mold 
Typhula blight 
(Typhula incarnata, and 
T. ishikariensis) 
0.4 10-28 Make two applications of 0.4 oz spaced 10-28 
days apart in late fall just before snow cover. 
When disease pressure is high, tank-mix 
Heritage Fungicide with another fungicide 
registered for control of snow mold. 
Leaf and Sheath Spot 
(Waitea zeae) 
0.4 14-28 Apply when disease conditions are favorable 
for disease development. 
 
Leaf Rust, Stem Rust, 
Stripe Rust 
(Puccinia spp.) 
 
0.2-0.4 
 
14-28 
 
Begin applications when conditions are 
favorable for disease infection, prior to 
disease symptom development. 
Leaf Spot 
(Bipolaris spp.) 
0.2-0.4 14-21 Apply when conditions are favorable for 
disease development. 
Melting Out 
(Drechslera poae) 
0.2-0.4 14-21 Apply when conditions are favorable for 
disease development. 
Necrotic Ring Spot 
(Ophiosphaerella korrae) 
0.2-0.4 14-28 Apply when conditions are favorable for 
disease development. 
Pink Patch 
(Limonomyses 
roseipellis) 
0.2-0.4 14-28 Apply when conditions are favorable for 
disease development. 
Pink Snow Mold 
(Monographella nivalis) 
0.4 10-28 Make two applications of 0.4 oz spaced 10-28 
days apart in late fall just before snow cover. 
When disease pressure is high, tank-mix 
Heritage Fungicide with another fungicide 
registered for control of snow mold.

Heritage Fungicide 
Page 20 
Target Diseases 
Use Rate 
(oz product/ 
1,000 sq ft) 
Application 
Interval 
(days) Application Instructions* 
Powdery Mildew 
(Erysiphe graminis) 
0.2-0.4 14-28 Begin applications when conditions are 
favorable for disease infection, prior to 
disease symptom development. 
Pythium Blight 
Pythium Root Rot 
(Pythium 
aphanidermatum, 
Pythium spp.) 
0.2-0.4 10-14 Use preventatively. Begin applications before 
disease is present. During periods of 
prolonged favorable conditions, treat on the 
10-day application interval. For use on newly 
seeded as well as established turf. 
Pythium Root Dysfunction 
(Pythium volutum) 
0.4 21-28 Apply preventatively when mean daily soil 
temperatures are between 55 F and 70 F. 
Irrigate with 0.1 to 0.2 inches within 24 hours 
after application to facilitate movement into 
the root zone. 
Red Thread 
(Laetisaria fuciformis) 
0.2-0.4 14-28 Apply when conditions are favorable for 
disease development. 
Large Patch 
(Rhizoctonia solani) 
0.2-0.4 14-28 Make one or two applications in fall or when 
conditions are favorable for disease 
development. Spring applications may also 
be required in some locations or when 
disease pressure is high. 
Southern Blight 
(Sclerotium rolfsii) 
0.2-0.4 14-28 Apply when conditions are favorable for 
disease development. 
Summer Patch 
(Magnaporthiopsis poae) 
0.2-0.4 14-28 Apply when conditions are favorable for 
disease development. 
Take-all patch 
(Gaeumannomyces 
graminis) 
0.2-0.4 28 Begin applications when conditions are 
favorable for disease infection, prior to 
disease symptom development. Make two 
applications 28 days apart in the spring and 
two applications 28 days apart in the fall. 
 
*Do not apply more than two sequential applications of Heritage Fungicide for control of Gray L eaf Spot 
and Pythium spp. For all other diseases when Gray Leaf Spot and Pythium spp. are not present, do not 
apply more than three sequential applications of Heritage Fungicide. 
 
TABLE 2: Heritage Fungicide Rate Conversion Chart for Turf 
 
Oz Product/ 
1,000 sq ft 
Oz AI/ 
1,000 sq ft 
Oz Product/ 
Acre 
Pound Product/ 
Acre 
0.20 0.10 8.7 0.5 
0.30 0.15 13.1 0.8 
0.40 0.20 17.4 1.1

Heritage Fungicide 
Page 21 
TABLE 3: Amount of Heritage Fungicide to Mix 100 Gallons for Turf Applications 
 
 Spray Volume (gallons/1,000 sq ft) 
Heritage Fungicide Use 
Rate 2.0 gallons 3.0 gallons 4.0 gallons 
0.20 oz 10 oz 6.7 oz 5 oz 
0.40 oz 20 oz 13.3 oz 10 oz 
 
DIRECTIONS FOR ORNAMENTALS 
 
Heritage Fungicide controls listed pathogens that cause foliar, aerial, and root diseases, 
including: leaf, tip, and flower blights; leaf spots; downy mildew; powdery mildew; 
anthracnose; and rusts of ornamental plants. Heritage Fungicide may be used to 
control certain diseases of container, bench, flat, plug, bed, succulents or field-grown 
ornamentals in greenhouses, shade- and lath-houses, outdoor nurseries, retail 
nurseries, interiorscapes, and other landscape areas. 
 
Integrated Pest (Disease) Management (IPM) 
 
Heritage Fungicide should be integrated into an overall disease management strategy 
that includes selection of varieties with disease tolerance, optimum plant populations, 
proper fertilization, winter and/or spring pruning, plant debris management and proper 
timing and placement of irrigation. Immunoassay detection kits and diagnostic services 
can assist in the early and accurate identification of causal organisms and 
corresponding selection of the proper fungicide when required. 
 
Resistance Management 
 
DO NOT make more than three (3) sequential applications of Heritage Fungicide before 
alternating with a fungicide of a different mode of action. A sound resistance 
management program would include blocks of three Heritage Fungicide applications 
separated by blocks of two alternate fungicide applications. DO NOT alternate Heritage 
Fungicide with other strobilurin fungicides. 
 
Application Directions 
 
Apply Heritage Fungicide as a foliar or soil broadcast, drench, or banded spray targeted 
at the foliage or crown of the plant. Apply to the point of runoff to ensure complete 
coverage of the target plant. Good coverage and wetting of foliage is necessary for 
best control. Refer to the label for specific use directions for control of certain diseases. 
Repeat applications at specified intervals using an appropriate resistance management 
program. 
 
Apply Heritage Fungicide at listed use rates. The addition of an adjuvant at the 
specified use rate may enhance coverage on hard-to-wet plant foliage. Under light to

Heritage Fungicide 
Page 22 
moderate disease pressure, use the lower listed rates and shorter listed application 
interval. Under environmental conditions conducive to severe disease development, 
use the higher rates and shorter listed application interval. Use of Heritage Fungicide 
as a "rescue" (late curative or eradicant) treatment is not recommended and may not 
result in satisfactory disease control. 
 
 
ORNAMENTALS USE RESTRICTIONS 
 
DO NOT apply more than 0.75 lb ai/A for field-grown or nursery ornamentals by 
groundboom or chemigation. 
 
 
For applications with handheld equipment to nursery ornamentals, broadcast 
application or landscaping (plants, flowers, trees and turf), DO NOT exceed 0.0025 lb 
ai/gal. 
 
For application with handheld equipment to Christmas tree, DO NOT exceed 0.00125 lb 
ai/gal. 
 
For application with mechanically pressurized handwand to greenhouse ornamentals, 
DO NOT exceed 0.0025 lb ai/gal. 
 
DO NOT apply greater than 2 pints of solution per square foot for drench and crown 
applications. 
 
DO NOT exceed 600 gallons spray volume per acre for foliar applications. 
 
DO NOT tank-mix Heritage Fungicide with other fungicides, insecticides, herbicides, 
fertilizers, or adjuvants unless local experience indicates that the tank mix will not injure 
ornamental plants. 
 
DO NOT apply Heritage Fungicide to apple or cherry trees (including flowering and 
ornamental varieties, such as Yoshino) due to possible phytotoxicity. 
 
DO NOT use spray equipment that has applied Heritage Fungicide for use in these 
sensitive crops due to possible phytotoxicity from residue remaining in the sprayer. 
 
DO NOT apply more than 10 lb of Heritage Fungicide/Acre (5 lb ai/Acre) per year to 
crops grown outdoors. 
 
 
Drench Application 
 
Heritage Fungicide may be applied to control soilborne, seedling, and crown diseases of 
ornamentals as a preventative drench treatment prior to infection. Good coverage of

Heritage Fungicide 
Page 23 
the pre-infection area (root zone, root ball, and crown) is necessary for satisfactory 
control. Heritage Fungicide may be applied by drench to container-grown ornamentals. 
Make a drench application prior to infection as healthy roots are necessary to optimize 
product uptake and systemic translocation to optimize disease protection. Due to the 
systemic activity of Heritage Fungicide, suppression of certain foliar diseases has been 
observed in plants treated with drench applications. 
 
Use caution before applying Heritage Fungicide as a drench to small bedding plants in 
the seedling/plug stage due to possible phytotoxicity. A limited quantity of plants should 
be tested prior to full-scale application. 
 
Chemigation: Use through Sprinkler and Drip Irrigation Systems 
 
Heritage Fungicide may be applied through sprinkler, drip, or other micro irrigation 
systems to potted ornamentals or to bedded, field-grown ornamentals for soil-borne 
disease control. Apply Heritage Fungicide as a preventative treatment. The soil or 
potting media should have adequate moisture capacity prior to drip application. 
 
Terminate irrigation at fungicide depletion from the main feed supply tank or after 6 
hours from start, whichever is shorter. For maximum efficacy, subsequent irrigation 
(water only) should be delayed for at least for 24 hours following application. 
 
PHYTOTOXICITY 
Application of Heritage Fungicide to crabapple may cause phytotoxicity. Heritage 
Fungicide may be applied to specific tolerant varieties of crabapple. Heritage Fungicide 
has been shown to be safer when applied to the species and varieties listed in Table 
12. Due to the large number of species, and varieties of crabapple, it is impossible to 
test every one for tolerance to Heritage Fungicide. The user should conduct small-scale 
testing to ensure plant safety prior to large-scale commercial use on plant species and 
varieties not listed on this label. 
 
When used in accordance with the label directions, Heritage Fungicide will provide 
control of the diseases of ornamental plants in the following table.

Heritage Fungicide 
Page 24 
TABLE 4: Foliar Plant Diseases Controlled 
(Heritage Fungicide is sold in several product container sizes. For product container 
sizes of 8 oz and larger, follow the mixing instructions in the second column. For the 4 
oz product container size, follow the mixing instructions in the third column in the 
following table.) 
DISEASE (Pathogen) 
Application Instructions 
8 oz and larger 
product container sizes 
(oz product per 100 gallons) 
4 oz product container size 
(oz product per 50 gallons) 
CONIFER BLIGHTS 
Phomopsis Blight 
(Phomopsis juniperovora) 
Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 
days. 
Tip Blight 
(Sirococcus strobilinus) 
Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 
days. 
LEAF BLIGHTS/LEAF SPOTS 
Alternaria Leaf Spot 
(Alternaria spp.) 
Apply 1-8 oz every 7-28 days. Apply 0.5-4 oz every 7-28 
days. 
Anthracnose 
(Colletotrichum spp., 
Elsinoe spp.) 
Apply 1--8 oz every 7-28 
days. 
Apply 0.5-4 oz every 7-28 
days. 
Cercospora Leaf Spot 
(Cersospora spp.) 
Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 
days. 
Cylindrocladium leaf 
spot/stem canker 
(Cylindrocladium spp.) 
Apply 4-8 oz every 7-14 
days. 
Apply 2-4 oz every 7-14 
days. 
Downy Mildew 
(including Peronospora 
spp., Plasmopara spp., 
Bremiella spp., Bremia 
spp.) 
Apply 2-4 oz every 7-21 days 
during periods of active plant 
growth and prior to dormancy 
or severe infection. Use lower 
use rates for herbaceous 
seedlings. 
Apply 1-2 oz every 7-21 days 
during periods of active plant 
growth and prior to dormancy 
or severe infection. 
Entomosporium Leaf Spot 
(Entomosporium spp.) 
(Diplocarpon spp.) 
Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 
days. 
Iris Leaf Spot 
(Mycosphaerella spp.) 
Apply 2-4 oz every 7-21 days. Apply 1-2 oz every 7-21 days. 
Leaf spot 
(Cladosporium spp., 
Septoria spp. and 
Stemphylium spp.) 
Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 
days.

Heritage Fungicide 
Page 25 
DISEASE (Pathogen) 
Application Instructions 
8 oz and larger 
product container sizes 
(oz product per 100 gallons) 
4 oz product container size 
(oz product per 50 gallons) 
Rose Blackspot 
(Diplocarpon rosea) 
Apply 4-8 oz every 7-14 days. 
Under severe disease 
conditions or if disease is 
already present, apply 
Heritage Fungicide at the 
highest listed rate and 
shortest application interval. 
Heritage Fungicide may be 
tank-mixed with another rose 
blackspot fungicide. Do not 
exceed 24 oz/A per 
application. 
Apply 2-4 oz every 7-14 days. 
Under severe disease 
conditions or if disease is 
already present, apply 
Heritage Fungicide at the 
highest listed rate and 
shortest application interval. 
Heritage Fungicide may be 
tank-mixed with another rose 
blackspot fungicide. Do not 
exceed 24 oz/A per 
application. 
Myrothecium leaf spot 
(Myrothecium spp.) 
Apply 2-4 oz every 7-21 days. Apply 1-2 oz every 7-21 days. 
Scab 
(Venturia inaequalis, 
Sphaceloma poinsettiae, 
Elsinöe australis) 
Apply 1-4 oz every 10-28 
days. Do not apply to apple 
trees. For crabapples, see 
Table 12 for tolerant varieties. 
Apply 0.5-2 oz every 10-28 
days. Do not apply to apple 
trees. For crabapples, see 
Table 12 for tolerant varieties. 
Marssonina Leaf Spot 
(Marssonina spp.) 
Apply 1-4 oz every 14-28 
days. 
Apply 0.5-2 oz every 14-28 
days. 
POWDERY MILDEW 
Erysiphe spp., 
Microsphaera spp., 
Podosphaera spp. , Oidium 
spp., Podosphaera spp., 
Uncinula spp. 
Apply 1-4 oz every 7-28 days. 
Do not make more than 2 
sequential applications before 
rotating to another class of 
fungicide. 
Apply 0.5-2 oz every 7-28 
days. Do not make more than 
2 sequential applications 
before rotating to another 
class of fungicide. 
RUSTS 
Needle Rust 
(Melampsora occidentalis) 
Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 
days. 
Other Rusts 
(Phragmidium spp., 
Puccinia spp., 
Gymnosporangium spp., 
Coleosporium spp., 
Uromyces spp.) 
Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 
days. 
FLOWER BLIGHTS 
Anthracnose 
(Collectotrichum spp., 
Elsinoe spp.) 
Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 
days. 
Botrytis Blight 
(Botrytis cinerea) 
Apply 4-8 oz every 7-21 days. 
For suppression only. Do not 
exceed 24 oz/acre. 
Apply 2-4 oz every 7-21 days. 
For suppression only. Do not 
exceed 24 oz/acre.

Heritage Fungicide 
Page 26 
DISEASE (Pathogen) 
Application Instructions 
8 oz and larger 
product container sizes 
(oz product per 100 gallons) 
4 oz product container size 
(oz product per 50 gallons) 
SHOOT/STEM DISEASES 
Aerial/Shoot Blight 
(Phytophthora spp.) 
Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 
days. 
DO NOT apply more than 0.75 lb ai/A for field-grown or nursery ornamentals by groundboom or 
chemigation. 
For applications with handheld equipment to nursery ornamentals, broadcast application or 
landscaping (plants, flowers, trees and turf), DO NOT exceed 0.0025 lb ai/gal. 
For application with mechanically pressurized handwand to greenhouse ornamentals, DO NOT 
exceed 0.0025 lb ai/gal 
DO NOT exceed 600 gallons spray volume per acre for foliar applications. 
DO NOT apply more than 10 lb of Heritage Fungicide/Acre (5 lb ai/Acre) per year to crops grown 
outdoors. 
 
 
 
TABLE 5: Soilborne Diseases Controlled – Directed Spray 
 
Pathogen 
Application Instructions 
8 oz and larger 
product container sizes 
(oz product per 100 gallons) 
4 oz product container size 
(oz product per 50 gallons) 
Fusarium spp. 
Rhizoctonia solani 
Athela rolfsii 
 (Sclerotium rolfsii) 
Sclerotinia spp. 
Apply 1-4 oz every 7-21 days. Apply 0.5-2 oz every 7-21 
days.

Heritage Fungicide 
Page 27 
TABLE 6: Soilborne Diseases Controlled – Drench and Drip Irrigation 
See Drench Application section of ORNAMENTAL DIRECTIONS FOR USE for 
additional drench directions. 
 
Pathogen 
Use Rate 
(oz product/100 gallons) Application Instructions 
Fusarium spp. 
Rhizoctonia solani 
Athelia rolfsii 
 (Sclerotium rolfsii) 
0.2-1.2 oz Apply 1-2 pints of the solution 
per square foot surface area 
every 7-28 days. 
Sclerotinia spp. 1.2 oz Apply 1-2 pints of the solution 
per square foot surface area 
every 7-28 days. Apply for 
control of Sclerotinia by 
drench application only. 
DO NOT apply greater than 2 pints of solution per square foot for drench and crown applications. 
 
TABLE 7: Soilborne Diseases Controlled – Banded Applications 
 
Pathogen 
Use Rate 
(oz product/1,000 row feet) Application Instructions 
Fusarium spp. 
Rhizoctonia solani 
Athelia rolfsii 
 (Sclerotium rolfsii) 
Sclerotinia spp. 
0.2-0.41 oz Apply as a banded spray, 7 
inches or less in width, directed 
to the soil using single or multiple 
spray nozzles adjusted to provide 
thorough coverage of lower 
stems2 and the soil surface. 
1When applications are applied to crops grown using 22-inch row spacing, the maximum application rate 
is 0.35 oz/1,000 row feet. 
2Applications that come into contact with the foliage are considered foliar applications for resistance 
management. 
 
TABLE 8: Soilborne Diseases Controlled – In-furrow Application 
 
Pathogen 
Use Rate 
(oz product/1,000 row feet) Application Instructions 
Fusarium spp. 
Rhizoctonia solani 
Athelia rolfsii 
 (Sclerotium rolfsii) 
 
0.2-0.3 oz1 Mount the spray nozzle to allow 
the spray mixture to be applied 
directly into the furrow and before 
the propagated unit (seed, seed 
pieces, bulbs or corms) are 
covered by soil. Apply the higher 
listed rate when current or 
expected weather conditions are 
conducive for disease 
development. 
Suppression Only: 
Pythium spp. 
1Apply product in 3 to 15 gallons of water per 1,000 row feet.

Heritage Fungicide 
Page 28 
 
TABLE 9: Soilborne Diseases Controlled – Broadcast Application 
 
Pathogen 
Use Rate 
(oz product/A) Application Instructions 
Fusarium spp. 
Rhizoctonia solani 
Athelia rolfsii 
 (Sclerotium rolfsii) 
Sclerotinia spp. 
2-16 oz Apply as a preventative 
broadcast application. Soil or 
potting media should have 
adequate moisture capacity prior 
to application if applied by 
overhead irrigation. 
 
TABLE 10: Foliar and Soil Diseases Suppressed – Drench and Drip Applications 
 
Disease/Pathogen 
Use Rate 
(oz product/100 gallons) Application Instructions 
Rusts 
Powdery Mildew 
Pythium spp. 
0.45-1.2 oz Apply 1-2 pints of the solution per 
square foot surface area every 7-
28 days. 
DO NOT apply greater than 2 pints of solution per square foot for drench and crown applications. 
 
Plant Safety 
 
Heritage Fungicide has been shown to be safe when applied to the ornamental plants 
listed in Tables 11 and 12 when applied according to listed application methods, rates, 
and timings. Due to the large number of species and varieties of ornamental and 
nursery plants, it is impossible to test every one for tolerance to Heritage Fungicide. 
Neither the manufacturer nor the seller has determined whether or not Heritage 
Fungicide can be used safely on ornamental and nursery plants not specified on this 
label. The user should conduct small-scale testing to ensure plant safety prior to large-
scale commercial use on varieties not listed on this label. Note: Applications to petunia 
and impatiens in bloom may occasionally cause discoloration to the flowers. 
 
DO NOT tank-mix Heritage Fungicide with other fungicides, insecticides, herbicides, 
fertilizers, or adjuvants unless local experience indicates that the tank mix is safe to 
ornamental plants. 
 
DO NOT apply Heritage Fungicide to certain crabapple or cherry trees (including 
flowering or ornamental varieties, such as Yoshino) due to possible phytotoxicity (see 
Table 13 for complete list). DO NOT use spray equipment that has been used to apply 
Heritage Fungicide for use in these sensitive crops due to possible phytotoxicity.

Heritage Fungicide 
Page 29 
TABLE 11: Tolerant Plants Listed by Common Name 
 
COMMON NAME BOTANICAL NAME 
Abelia Abelia spp. 
Andromeda, Japanese Pieris japonica 
Arborvitae Thujopsis spp. 
Aspen Trees Populus spp. 
Aster Aster spp. 
Aucuba, Japanese Aucuba japonica 
Azalea, Glacier Rhododendron spp. 
Azaleas Rhododendron spp. 
Balsam Impatiens spp. 
Barberry Berberis thunbergii 
Begonia (except Rieger begonia) Begonia spp. 
Birch, River Betula nigra 
Black-Eyed Susan Rudbeckia hirta 
Blanket Flower Gaillardia spp. 
Bougainvillea Bougainvillea spp. 
Boxwood Buxus sempervirens 
Buddleia Buddleia davidii 
Bugle Ajuga reptans 
Bugleweed Ajuga reptans 
Burning Bush Euonymus alatus 
Butterfly Bush Buddleia davidii 
Cactus, Holiday Schlumbergera 
Caladium Caladium spp. 
Camellia Camellia japonica 
Carnation Dianthus caryophyllus 
Ceanothus Ceanothus spp. 
Cedar, Atlas Cedrus atlantica 
Cedar, Red Juniperus virginiana 
Cedar, Western Red Thuja plicata 
Cedar, White Cedrus spp. 
Christmas Trees See Fir, Douglas; Fir, Fraser; and Pine, Scotch 
Chrysanthemum Chrysanthemum spp. 
Cinquefoil Potentilla spp. 
Clethra Clethra alnifolia 
Coleus Plectranthus spp. 
Cotoneaster, Creeping Cotoneaster adpressus 
Cotoneaster, Variegated Rockspray Cotoneaster horizontalis 
Crabapple (See Table 12 for variety list) Malus spp. 
Cranesbill Geranium spp.

Heritage Fungicide 
Page 30 
COMMON NAME BOTANICAL NAME 
Crapemyrtle Lagerstroemia indica 
Cyclamen Cyclamen spp. 
Cyperus Cyperus spp. 
Cypress, Sawara Chamaecyparis pisifera 
Cypress, Leyland Chamaecyparis spp. 
Daisy, Gerber Gerbera jamesonii 
Daisy, Transvaal Gerbera jamesonii 
Dogwood Cornus spp. 
Dogwood Cornus florida 
Dogwood, Pink Cornus spp. 
Dumb-Cane Dieffenbachia spp. 
Euonymus, Dwarf Winged Euonymus alata 
Euonymus, Evergreen Euonymus japonicus 
Evergreen, Chinese Aglaonema spp. 
Fatsia, Japanese Fatsia japonica 
Fig Ficus spp. 
Fir, Douglas Pseudotsuga spp. 
Fir, Fraser Abies fraseri 
Fir, Noble Abies procera 
Floss Flower Ageratum spp. 
Forsythia Forsythia viridissima 
Foxglove Digitalis spp. 
Gardenia Gardenia jasminoides 
Geranium Pelargonium spp. 
Grass Pennisetum alopecuroides 
Grass, Dwarf Pampas Phalaris spp. 
Grass, Pampas Cortaderia selloana 
Hawthorn, Indian Rhaphiolepsis indica 
Heather Erica dareyensis 
Hemlock Tsuga spp. 
Hemlock, Western Tsuga heterophylla 
Hibiscus Hibiscus moscheutos 
Hibiscus Hibiscus rosa-sinensis 
Holly Ilex spp. 
Hosta Hosta spp. 
House Leek Sempervivum spp. 
Hydrangea Hydrangea spp. 
Hydrangea, French Hydrangea macrophylla 
Impatiens1,2 Impatiens spp. 1,2 
Iris (Bulbous, Spanish, Dutch) Iris xiphium 
Iris, African Dietes iridiodes

Heritage Fungicide 
Page 31 
COMMON NAME BOTANICAL NAME 
Iris, Butterfly Dietes iridiodes 
Ivy, Algerian Hedera algeriensis 
Ivy, English Hedera helix 
Ivy, Swedish Plectranthus spp. 
Japanese Pittosporum Pittosporum tobira 
Juniper Juniperus procumbens 
Juniper Juniperus scopulorum 
Juniper Juniperus spp. 
Larkspur Delphinium spp. 
Laurel Laurus nobilis 
Laurel, Australian Pittosporum spp. 
Laurel, Japanese Aucuba japonica 
Lilac, California Ceanothus spp. 
Lilac, Wild Ceanothus sanguineus 
Lily, Asiatic Lilium spp. 
Lily, Peace Spathiphyllum floribundium 
Lily-Turf Liriope muscari 
Live-Forever Sempervivum spp. 
Magnolia Magnolia spp. 
Magnolia, Saucer Magnolia soulangiana 
Magnolia, Southern Magnolia grandiflora 
Maple, Japanese Acer palmatum 
Maple, Sugar Acer saccharum 
Marigold Tagetes spp. 
Mugwort Artemisia spp. 
Nandina Nandina domestica 
Oak, Pin Quercus palustris 
Oak, Red Quercus falcata 
Oleander Nerium oleander 
Orpine Sedum spp. 
Palm, Date Phoenix dactylifera 
Palm, Parlor Chamaedora elegans 
Palm, Queen Syagrus romanzoffianum 
Palm, Robellini Phoenix roebelenii 
Palm, Sago Caryota urens 
Pansy1 Viola spp.1 
Paper Plant Fatsia japonica 
Pear, Bradford's Pyrus calleryana 
Periwinkle Vinca spp. 
Petunia2 Petunia spp.

Heritage Fungicide 
Page 32 
COMMON NAME BOTANICAL NAME 
Philodendron Philodendron spp. 
Phlox Phlox spp. 
Photinia, Red-Tip Photinia glabra 
Pine Pinus spp. 
Pine, Black Pinus nigra 
Pine, Eastern White Pinus strobus 
Pine, Mugo Pinus mugo 
Pine, Scotch Pinus sylvestris 
Pink Dianthus spp. 
Plum, Flowering Prunus spp. 
Plum, Purple-Leaf Prunus spp. 
Poinsettia Euphorbia spp. 
Poplar Populus trichocarpa 
Pothos Epipremnum spp. 
Primrose Primula spp. 
Pussy's Foot Ageratum spp. 
Redbud, Western Cercis occidentalis 
Rhododendron Rhododendron spp. 
Ribbon Grass Setaria spp. 
Rose of Sharon Hibiscus syriacus 
Rose Rosa spp. 
Rose-Bay Nerium oleander 
Rosemary (Prostrate) Rosmarinus spp. 
Rubber Plant, Baby Peperomia spp. 
Rubber Tree Brassaia actinophylla 
Sage Salvia spp. 
Sand cherry Prunus pumila 
Snap-Dragon Antirrhinum spp. 
Snowball Ceanothus spp. 
Spirea Spirea budalda 
Spirea Spirea japonica 
Spruce, Blue Picea pungens 
Spruce, Norway Picea abies 
Spruce, White Picea glauca 
Starwort Aster spp. 
Stonecrop Sedum spp. 
Succulent Succulents encompass a wide variety of genera, 
including but not limited to Echeveria, Crassula, 
Haworthia, Gasteria, Agave, Euphorbia, Senecio, 
Sedum, and Sempervivum. 
Sweet Alyssum Lobularia maritima

Heritage Fungicide 
Page 33 
COMMON NAME BOTANICAL NAME 
Thyme, Creeping Thymus serphyllum 
Umbrella Tree Brassaia actinophylla 
Verbena Verbena spp. 
Vervain Verbena spp. 
Viburnum Viburnum spp. 
Vinca Catharanthus roseus 
Viola Viola spp. 
White Alder Clethora spp. 
Weigela, Pink Weigela florida 
Willow, Virginia Itea virginica 
Winterberry Ilex spp. 
Wormwood Artemisia spp. 
Yaupon Ilex spp. 
Yew, Spreading Taxus baccata 
Yucca Yucca spp. 
Zebra Plant Aphelandra spp. 
Zinnia Zinnia spp. 
1 Do not exceed 2 oz/100 gallons on these species. 
2 Heritage Fungicide may occasionally cause discoloration of flowers when applied directly to blooms of 
certain plant species. Not all varieties and colors have been evaluated. 
 
TABLE 12: Tolerant Varieties of Ornamental Crabapple Species (Genus Malus) 
 
Callaway Golden Raindrops Mary Potter Selkirk 
Carmine (M. 
atrosanguinea) 
Hopa Molten Lava Sentinel 
Candymint Sargent Indian Magic New Centennial Silver Moon 
Christmas Holly Island Ormiston Roy Silverdrift 
David Jackii (M. baccata var. 
jackii) 
Pink Satin Sinai Fire 
Dolgo Japanese Flowering 
Crabapple 
(M. floribunda) 
Prairie Maid Sugar Tyme 
Donald Wyman Katherine Prairiefire Van Eseltine 
Dorothea Lancelot Profusion White Angel 
Doubloons Louisa Ralph Shay Wild crabapple 
(M. coronaria) 
Eleyi Malus x zumi var. 
Calocarpa 
Red Baron Winter Gold 
Evereste M. sargentii Red Jade 
Eyelynn Manchurian 
(M. baccata var. 
mandshurica) 
Sargent

Heritage Fungicide 
Page 34 
TABLE 13: Plants Sensitive to Heritage Fungicide 
(Do not apply Heritage Fungicide to these species or varieties.) 
 
COMMON NAME BOTANICAL NAME 
Crabapple - Flame variety Malus spp. ‘Flame’ 
Crabapple – Brandywine variety Malus spp. ‘Brandywine’ 
Crabapple – Novamac variety Malus spp. ‘Novamac’ 
Cherry, Flowering – Yoshino variety Prunus x yedoensis 
Leatherleaf Fern and Other Ferns for cut foliage Rumohra adianformis and other species 
Privet Ligustrum spp.

Heritage Fungicide 
Page 35 
CONIFERS INCLUDING CHRISTMAS TREES AND COMMERCIAL PRODUCTION 
ROSES 
 
Heritage Fungicide may be used to control certain diseases on conifers and commercial 
production roses in indoor and outdoor production and landscape situations. See the 
DIRECTIONS FOR ORNAMENTALS section above for more detailed directions for use 
in landscape situations. 
[On the following Specific Use Directions for Conifer and Commercial Rose 
Production table, use the oz product/A rate (column 3) for products 8 oz or larger. 
Use the oz product/0.5 A rate (column 4) for 4 oz products.] 
 
TABLE 14: Specific Use Directions for Conifer and Commercial Rose Production 
Crop Target Diseases 
Use Rate 
oz product/A 
(lb ai/A) 
Use Rate 
oz product/0.5 
A 
(lb ai/A) Application Instructions 
Conifers 
including 
Christmas 
Trees 
Diplodia tip blight 
(Diplodia pinea) 
 
Lophodermium 
needlecast 
(Lophodermium 
pinastri) 
 
Swiss needlecast 
(Phaeocrytopus 
gaumannii) 
3.2-8.0 
(0.10-0.25) 
1.6-4.0 
(0.10-0.25) 
Integrated Pest 
(Disease) Management: 
Heritage Fungicide should 
be integrated into an 
overall disease 
management strategy that 
includes selection of 
varieties with disease 
tolerance and removal of 
plant debris in which 
inoculum may overwinter. 
 
Resistance 
Management: Do not 
apply more than four 
sequential applications of 
Heritage Fungicide before 
alternating with a 
fungicide that is not in 
Group 11. Do not make 
more than eight 
applications of Heritage 
Fungicide per acre per 
year. 
 
Begin Heritage Fungicide 
applications prior to 
disease development and 
continue throughout the 
disease development 
period at 7- to 21-day 
intervals following the 
resistance management 
guidelines. 
 
Applications may be

Heritage Fungicide 
Page 36 
Crop Target Diseases 
Use Rate 
oz product/A 
(lb ai/A) 
Use Rate 
oz product/0.5 
A 
(lb ai/A) Application Instructions 
made by ground, air or 
chemigation. An adjuvant 
may be added at specified 
rates. 
Specific Use Restrictions: DO NOT apply more than 4.0 pounds product/acre (2.0 lb ai/A/year). 
Maximum application rates for Christmas tree using any handheld equipment: DO NOT exceed 
0.00125 lb ai/gal for foliar applications. 
 
 
Roses 
(commercial 
production) 
Black spot 
(Diplocarpon 
rosea) 
Cercospora Leaf 
spot 
(Cercospora spp.) 
Downy Mildew 
(Peronospora 
sparsa) 
Powdery Mildew 
(Podosphaera 
pannosa ) 
Rust 
(Phragmidium 
mucronatum, P. 
tuberculatum, and 
other 
Phragmidium 
spp.) 
Septoria Leaf Spot 
(Septoria rosea) 
Alternaria Leaf Spot 
(Alternaria 
alternata) 
1.6-8.0 
(0.05-0.25) 
0.8-4.0 
(0.05-0.25) 
Integrated Pest 
(Disease) Management: 
Heritage Fungicide should 
be integrated into an 
overall disease 
management strategy that 
includes selection of 
varieties with disease 
tolerance, optimum plant 
populations, proper 
fertilization, winter and/or 
spring pruning, plant 
residue management and 
proper timing and 
placement of irrigation. 
 
Resistance 
Management: Do not 
make more than four 
sequential applications of 
Heritage Fungicide before 
alternating with a 
fungicide that is not in 
Group 11. Do not make 
more than eight 
applications per acre per 
year. 
 
Begin Heritage Fungicide 
application prior to 
disease development and 
continue throughout the 
disease development 
period on 7- to 21-day 
intervals following the 
resistance management 
guidelines. 
 
Applications may be 
made by ground, air or 
chemigation. An adjuvant 
may be added at specified

Heritage Fungicide 
Page 37 
Crop Target Diseases 
Use Rate 
oz product/A 
(lb ai/A) 
Use Rate 
oz product/0.5 
A 
(lb ai/A) Application Instructions 
rates. 
Specific Use Restrictions: Do not apply more than 4.0 pounds product/acre (2.0 lb ai/A/year). 
DO NOT apply more than 0.75 lb ai/A for field-grown or nursery ornamentals by groundboom or 
chemigation. 
For applications with handheld equipment, DO NOT exceed 0.0025 lb ai/gal. 
For application with mechanically pressurized handwand to greenhouse ornamentals, DO NOT exceed 
0.0025 lb ai/gal 
DO NOT exceed 600 gallons spray volume per acre for foliar applications.

Heritage Fungicide 
Page 38 
PLANTS GROWN FOR FRUIT AND NUTS 
 
RESTRICTION: Heritage may be applied to fruit and nut trees, fruiting vines, brambles 
and bushberries grown in ornamental production nurseries and intended for resale to 
the consumer market. In some instances, immature and or/inedible berries, fruits, or 
nuts may be present on the plant at the time of the application but are not intended for 
immediate harvest or consumption. 
 
[On the following Fruit and Nut tables, use the oz product/A rate (column 3) for 
products 8 oz or larger. Use the oz product/0.5 A rate (column 4) for 4 oz products. 
Use the oz product/1,000 sq ft rate (column 5) for all product sizes.]

Heritage Fungicide 
Page 39 
TABLE 15: Specific Use Directions for Almonds 
Crop Target Diseases 
Use Rate 
oz 
product/A 
(lb ai/A) 
 
Use Rate 
oz 
product/0.5 
A 
(lb ai/A) 
Use 
Rate 
oz 
product/ 
1,000 sq 
ft Application Instructions 
Almonds Alternaria leaf and 
fruit spot 
(Alternaria 
alternata) 
Anthracnose 
(Colletotrichum 
acutatum) 
Leaf Blight 
(Seimatosporium 
lichenicola) 
Leaf rust 
(Tranzschelia 
discolor) 
Scab 
(Cladosporium 
carpophilum) 
Shothole 
(Wilsonomyces 
carpophilus) 
3.2-8.0 
(0.1-0.25) 
 
1.6-4.0 
(0.1-0.25) 
 
0.075-
0.18 
 
Resistance Management: Do 
not apply more than two 
sequential applications of 
Heritage Fungicide or other 
Group 11 fungicides before 
alternation with a fungicide 
that is not in Group 11. 
 
Begin Heritage Fungicide 
applications prior to disease 
development and continue 
throughout the disease 
development period following 
the resistance management 
guidelines. Applications may 
be made by ground, air 
(minimum 15 GPA) or 
chemigation. Heritage 
Fungicide may be applied by 
air only at growth stages prior 
to and including 5 weeks after 
petal fall. An adjuvant may be 
added at specified rates. 
 
For anthracnose, scab and 
shothole, begin applications 
prior to disease development 
and continue at 7- to 14-day 
intervals throughout the 
disease development period. 
Brown Rot Blossom 
Blight 
(Monilinia laxa, 
M. fructicola) 
6.4 – 8.0 
(0.2-0.25) 
 
3.2-4.0 
(0.2-0.25) 
 
0.15-
0.18 
For blossom blight, begin 
applications at early bloom 
and continue through petal 
fall. 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. 
• Do not apply within 28 days of harvest (28-day PHI).

Heritage Fungicide 
Page 40 
TABLE 16: Specific Use Directions for Bananas and Plantains 
Crop Target Diseases 
Use Rate 
oz 
product/A 
(lb ai/A) 
Use Rate 
oz 
product/0.5 
A 
(lb ai/A) 
Use 
Rate 
oz 
product/ 
1,000 sq 
ft Application Instructions 
Bananas 
Plantains 
Black Sigatoka 
(Mycosphaerella 
fijiensis) 
Yellow Sigatoka 
(Mycosphaerella 
musicola) 
 
2.9-4.3 
(0.09-
0.135) 
1.45-2.15 
(0.09-
0.135) 
0.07-0.1 Integrated Pest (Disease) 
Management: Heritage 
Fungicide should be 
integrated into an overall 
disease management strategy 
that includes canopy 
management through removal 
of suckers, proper plant 
spacing, selection of varieties 
with disease tolerance, 
removal of plant debris in 
which inoculum overwinters, 
and good surface water 
drainage. 
 
Resistance Management: 
Follow the resistance 
management guidelines in the 
Resistance Management 
section. Do not apply more 
than two sequential 
applications of Heritage 
Fungicide or other Group 11 
fungicides before alternation 
with a fungicide that is not in 
Group 11. 
 
Begin Heritage Fungicide 
applications prior to disease 
development and continue 
throughout the disease 
development period every 12-
14 days following the 
resistance management 
guidelines. Applications may 
be made by ground, air or 
chemigation. An adjuvant 
may be added at specified 
rates. 
Specific Use Restrictions: 
• Do not apply more than 1.08 lb ai/A per year of azoxystrobin-containing products. 
• May be applied the day of harvest (0-day PHI).

Heritage Fungicide 
Page 41 
TABLE 17: Specific Use Directions for Berries, Bushberry Subgroup 
Crop Target Diseases 
Use Rate 
oz 
product/A 
(lb ai/A) 
Use Rate 
oz 
product/0.5 
A 
(lb ai/A) 
Use 
Rate 
oz 
product/ 
1,000 sq 
ft Application Instructions 
Berries 
Bushberry 
subgroup 
 
Blueberry 
Currant 
Elderberry 
Gooseberry 
Huckleberry 
Lingonberry 
Juneberry 
Salal 
 
including all 
cultivars 
and/or 
hybrids of 
these 
Alternaria Leaf 
Spot and Fruit 
Rot 
(Alternaria spp.) 
Anthracnose fruit 
rot 
(Colletotrichum 
gloeosporoides) 
Botryosphaeria 
canker 
(Botryosphaeria 
spp.) 
Mummyberry 
(Vaccinium 
spp.) 
Phomopsis stem 
canker 
(Phomopsis 
vaccinii) 
Powdery mildew 
(Podosphaera 
spp. ) 
Septoria blight 
(Septoria spp.) 
3.2-8.0 
(0.1-0.25) 
1.6-4.0 
(0.1-0.25) 
0.08-
0.18 
Resistance Management: 
Follow the resistance 
management guidelines in 
the Resistance 
Management section. Do 
not apply more than two 
sequential applications of 
Heritage Fungicide or other 
Group 11 fungicides before 
alternation with a fungicide 
that is not in Group 11. 
 
Begin Heritage Fungicide 
applications prior to disease 
development and continue 
throughout the disease 
development period on a 7- 
to 14- day schedule, 
following the resistance 
management guidelines. 
Applications may be made 
by ground, air or 
chemigation. An adjuvant 
may be added at specified 
rates. 
Specific Use Restrictions: 
• Do not apply more than 0.75 lb ai/A per year of azoxystrobin-containing products. 
• May be applied the day of harvest (0-day PHI).

Heritage Fungicide 
Page 42 
TABLE 18: Specific Use Directions for Berries, Caneberry Subgroup 
Crop Target Diseases 
Use Rate 
oz 
product/A 
(lb ai/A) 
Use Rate 
oz 
product/0.5 
A 
(lb ai/A) 
Use 
Rate 
oz 
product/ 
1,000 sq 
ft Application Instructions 
Berries 
Caneberry 
subgroup 
 
Blackberry 
Bingleberry 
Boysenberry 
Dewberry 
Lowberry 
Marionberry 
Olallieberry 
Youngberry 
Loganberry 
Red and 
black 
raspberry 
 
including all 
cultivars 
and/or 
hybrids of 
these 
Anthracnose 
(Sphaceloma 
necator) 
(Elsinoe veneta) 
Botryosphaeria 
canker 
(Botryosphaeria 
dothidea) 
Colletotrichum rot 
(Colletotrichum 
gloeosporioides) 
Leaf spot 
(Septoria rubi) 
(Sphaerulina 
rubi) 
Powdery mildew 
(Podosphaera 
macularis) 
Rosette or double 
blossom of 
blackberries 
(Cercosporella 
rubi) 
Spur blight 
(Didymella 
applanata) 
 
3.2-8.0 
(0.1-0.25) 
1.6-4.0 
(0.1-0.25) 
0.08-
0.18 
Integrated Pest (Disease) 
Management: Heritage 
Fungicide should be 
integrated into an overall 
disease management 
strategy that includes 
varieties with disease 
tolerance, proper timing of 
irrigation and removal of 
plant debris in which 
inoculum overwinters. 
 
Resistance Management: 
Follow the resistance 
management guidelines in 
the Resistance 
Management section. Do 
not apply more than two 
sequential applications of 
Heritage Fungicide or 
other Group 11 fungicides 
before alternation with a 
fungicide that is not in 
Group 11. 
 
Begin applications at onset 
of disease and continue as 
required until harvest. 
Make applications on a 7- 
to 14-day schedule. 
Applications may be made 
by ground, air or 
chemigation. Use a 
minimum water volume of 
10 gallons per acre by 
ground and a minimum of 
3 gallons by air. 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. 
• May be applied the day of harvest (0-day PHI).

Heritage Fungicide 
Page 43 
TABLE 19: Specific Use Directions for Citrus Fruit 
Crop Target Diseases 
Use Rate 
oz 
product/A 
(lb ai/A) 
Use Rate 
oz 
product/0.5 
A 
(lb ai/A) 
Use 
Rate 
oz 
product/ 
1,000 sq 
ft 
Application 
Instructions 
Citrus Fruit 
 
Calamondin 
Citron 
Grapefruit 
Kumquat 
Lemon 
Lime 
Mandarin 
Orange (sour 
and sweet) 
Pummelo 
Satsuma 
mandarin 
Tangerine 
 
including all 
cultivars 
and/or 
hybrids of 
these 
Albinism 
(Alternaria alternata 
pv. citri) 
Alternaria leaf and 
fruit spot 
(Alternaria citri) 
Cercospora leaf spot 
(Cercospora spp.) 
Diplodia stem-end rot 
(Lasiodiplodia 
theobromae) 
Greasy spot 
(Mycosphaerella 
citri) 
Melanose 
(Diaporthe citri) 
Penicillium Decays 
Green mold, 
Whisker mold, 
suppression of Blue 
mold 
(Penicillium spp.) 
Phomopsis stem-end 
rot 
(Phomopsis citrii) 
Post-bloom fruit drop 
(PFD) 
(Colletotrichum 
acutatum) 
Powdery mildew 
(Erysiphe spp.) 
Scab 
(Elsinoe fawcettii) 
6.4-8.0 
(0.2-0.25) 
3.2-4.0 
(0.2-0.25) 
0.15-
0.18 
Integrated Pest 
(Disease) 
Management: Heritage 
Fungicide should be 
integrated into an 
overall disease 
management strategy 
that includes selection 
of varieties with disease 
tolerance, removal of 
plant debris in which 
inoculum overwinters, 
and proper timing of 
irrigation. 
 
Resistance 
Management: Follow 
the resistance 
management guidelines 
in the Resistance 
Management section. 
Do not apply more than 
two sequential 
applications of Heritage 
Fungicide or other 
Group 11 fungicides 
before alternation with a 
fungicide that is not in 
Group 11. Do not make 
more than four (4) 
applications of Heritage 
Fungicide or other 
Group 11 fungicide per 
disease development 
period. 
 
Begin Heritage 
Fungicide applications 
prior to disease 
development and 
continue throughout the 
disease development

Heritage Fungicide 
Page 44 
 
 
 
period on 7- to 21-day 
intervals following the 
resistance management 
guidelines. Under 
conditions that favor 
severe disease 
epidemics, apply 
Heritage Fungicide at 
the highest listed rate. 
Applications may be 
made by ground, air or 
chemigation. An 
adjuvant may be added 
at specified rates. Use 
a horticultural spray oil 
to improve control of 
greasy spot. 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. 
• May be applied the day of harvest (0-day PHI).

Heritage Fungicide 
Page 45 
TABLE 20: Specific Use Directions for Grapes 
Crop 
Target 
Diseases 
Use Rate 
oz 
product/A 
(lb ai/A) 
Use Rate 
oz 
product/0.5 
A 
(lb ai/A) 
Use 
Rate 
oz 
product/ 
1,000 sq 
ft Application Instructions 
Grapes 
 
including 
Muscadines 
Black rot 
(Guignardia 
bidwellii) 
Downy Mildew 
(Plasmopara 
viticola) 
Phomopsis 
cane and 
leaf spot 
(Phomopsis 
viticola) 
Powdery 
mildew 
(Uncinula 
necator) 
 
Suppression 
Only: 
Botrytis bunch 
rot 
(Botrytis 
cinerea) 
5.1-8.0 
(0.16-
0.25) 
2.55-4.0 
(0.16-0.25) 
0.11-
0.18 
Integrated Pest (Disease) 
Management: Heritage 
Fungicide should be integrated 
into an overall disease 
management strategy that 
includes canopy management 
through pruning and thinning, 
proper selection of varieties with 
disease tolerance, proper timing 
and placement of irrigation and 
removal of plant debris in which 
inoculum overwinters. 
 
Resistance Management: 
Follow the resistance 
management guidelines in the 
Resistance Management 
section. Do not apply more 
than two sequential foliar 
applications of Heritage 
Fungicide or other Group 11 
fungicides before alternating 
with a fungicide that is not in 
Group 11. 
 
Begin Heritage Fungicide 
applications prior to disease 
development and continue 
throughout the disease 
development period every 10-14 
days following the resistance 
management guidelines. 
Applications may be made by 
ground, air or chemigation. An 
adjuvant may be added at 
specified rates. 
 
ATTENTION 
Heritage Fungicide is extremely 
phytotoxic to certain apple 
varieties. DO NOT spray 
Heritage Fungicide where spray 
drift may reach apple trees.

Heritage Fungicide 
Page 46 
 
 
 
DO NOT use spray equipment 
which has been previously used 
to apply Heritage Fungicide to 
spray apple trees. Even trace 
amounts can cause 
unacceptable phytotoxicity to 
certain apple and crabapple 
varieties. 
 
AVOIDING SPRAY DRIFT IS 
THE RESPONSIBILITY OF 
THE APPLICATOR. 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. 
• Do not apply within 14 days of harvest (14-day PHI).

Heritage Fungicide 
Page 47 
TABLE 21: Specific Use Directions for Pecans 
Crop 
Target 
Diseases 
Use Rate 
oz 
product/A 
(lb ai/A) 
Use Rate 
oz 
product/0.5 
A 
(lb ai/A) 
Use 
Rate 
oz 
product/ 
1,000 sq 
ft Application Instructions 
Pecans Anthracnose 
(Glomerella 
cingulata) 
Scab 
(Cladosporium 
caryigenum) 
3.2-6.4 
(0.10-
0.20) 
1.6-3.2 
(0.10-0.20) 
0.08-
0.15 
Integrated Pest (Disease) 
Management: Heritage 
Fungicide should be integrated 
into an overall disease 
management strategy that 
includes selection of varieties with 
tolerance to disease and removal 
of plant debris in which inoculum 
overwinters. 
 
Resistance Management: 
Follow the resistance 
management guidelines in the 
Resistance Management 
section. Do not apply more than 
two sequential applications of 
Heritage Fungicide or other Group 
11 fungicides before alternation 
with a fungicide that is not in 
Group 11. 
 
Begin Heritage Fungicide 
applications prior to disease 
development and continue 
throughout the disease 
development period on 7- to 21-
day intervals following the 
resistance management 
guidelines. 
 
Applications may be made by 
ground, air or chemigation. An 
adjuvant may be added at 
specified rates. 
 
Specific Use Restrictions: 
• Do not apply more than 1.2 lb ai/A per year of azoxystrobin-containing products. 
• Do not apply within 45 days of harvest (45-day PHI).

Heritage Fungicide 
Page 48 
TABLE 22: Specific Use Directions for Pistachios 
Crop Target Diseases 
Use Rate 
oz 
product/A 
(lb ai/A) 
Use Rate 
oz 
product/0.5 
A 
(lb ai/A) 
Use 
Rate 
oz 
product/ 
1,000 sq 
ft Application Instructions 
Pistachios Alternaria late 
blight 
(Alternaria 
alternata) 
Botryosphaeria 
panicle and 
shoot blight 
(Botryosphaeria 
dothidea) 
Septoria leaf spot 
(Septoria 
pistaciarum) 
3.2-8.0 
(0.10-
0.25) 
1.6-4.0 
(0.10-0.25) 
0.08-
0.18 
Integrated Pest (Disease) 
Management: Heritage 
Fungicide should be 
integrated into an overall 
disease management 
strategy that includes 
selection of varieties with 
disease tolerance and 
removal of plant debris in 
which inoculum overwinters. 
 
Resistance Management: 
Follow the resistance 
management guidelines in 
the Resistance 
Management section. Do 
not apply more than two 
sequential applications of 
Heritage Fungicide or other 
Group 11 fungicides before 
alternation with a fungicide 
that is not in Group 11. 
 
Begin Heritage Fungicide 
applications prior to disease 
development and continue 
throughout the disease 
development period on 7- to 
21-day intervals following the 
resistance management 
guidelines. 
 
Applications may be made 
by ground, air or 
chemigation. An adjuvant 
may be added at specified 
rates. 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. 
• Do not apply within 7 days of harvest (7-day PHI).

Heritage Fungicide 
Page 49 
TABLE 23: Specific Use Directions for Stone Fruit 
 
Crop Target Diseases 
Use Rate 
oz 
product/A 
(lb ai/A) 
Use Rate 
oz 
product/0.5 
A 
(lb ai/A) 
Use 
Rate 
oz 
product/ 
1,000 sq 
ft 
Application 
Instructions 
Stone 
Fruit 
 
Apricot 
Cherry, 
sweet 
Cherry, 
tart 
Nectarine 
Peach 
Plum 
Plumcot 
Prune 
Alternaria spot and fruit 
rot 
(Alternaria alternata) 
Anthracnose 
(Colletotrichum 
prunicola, 
C. gloeosporioides) 
Leaf rust 
(Tranzschelia discolor) 
Powdery mildew 
(Podosphaera 
pannosa, Podosphaera 
clandestina) 
Scab 
(Cladosporium 
carpophilum) 
Shot hole 
(Wilsonomyces 
carpophilus) 
3.2-8.0 
(0.1-0.25) 
1.6-4.0 
(0.1-0.25) 
0.08-
0.18 
 
Resistance 
Management: Follow 
the resistance 
management 
guidelines in the 
Resistance 
Management section. 
Do not apply more 
than two sequential 
applications of 
Heritage Fungicide or 
other Group 11 
fungicides before 
alternation with a 
fungicide that is not in 
Group 11. 
 
For brown rot blossom 
blight, begin 
applications at early 
bloom and continue 
through petal fall. For 
brown rot on fruit, 
Heritage Fungicide 
may be applied to fruit 
up to the day of 
harvest. For scab, 
begin applications at 
petal fall and continue 
at 7- to 14-day 
intervals. For all other 
diseases, begin 
application at the onset 
of disease as a 
protectant fungicide 
and continue on a 7- to 
14-day schedule. For 
peaches only, 5-8 oz. 
of Heritage Fungicide 
may be used for scab 
control. 
 
Applications may be 
Brown rot blossom blight 
and fruit rot 
(Monilinia fructicola, M. 
laxa) 
6.4-8.0 
(0.2-0.25) 
3.2-4.0 
(0.2-0.25) 
0.15-
0.18

Heritage Fungicide 
Page 50 
 
 
made by ground, air or 
chemigation 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. 
• May be applied the day of harvest (0-day PHI).

Heritage Fungicide 
Page 51 
TABLE 24: Specific Use Directions for Strawberry 
 
 
Crop 
Target 
Diseases 
Use Rate 
oz 
product/A 
(lb ai/A) 
Use Rate 
oz 
product/0.5 
A 
(lb ai/A) 
Use 
Rate 
oz 
product/ 
1,000 sq 
ft Application Instructions 
Strawberry Anthracnose 
(Colletotrichum 
fragariae) 
Powdery mildew 
(Podosphaera 
macularis) 
 
Suppression 
only: Botrytis 
on the foliage 
(Botrytis 
cinerea) 
 
3.2-8.0 
(0.1-0.25) 
1.6-4.0 
(0.1-0.25) 
0.08-
0.18 
Resistance Management: 
Follow the resistance 
management guidelines in 
the Resistance 
Management section. Do 
not apply more than two 
sequential applications of 
Heritage Fungicide or other 
Group 11 fungicides before 
alternation with a fungicide 
that is not in Group 11. 
 
Begin Heritage Fungicide 
applications prior to disease 
development and continue 
throughout the disease 
development period on a 7- 
to 10-day schedule, following 
the resistance management 
guidelines. Applications may 
be made by ground, air or 
chemigation. An adjuvant 
may be added at specified 
rates. 
 
 
Specific Use Restrictions: 
• Do not apply more than 1.0 lb ai/A per year of azoxystrobin-containing products. 
• May be applied the day of harvest (0-day PHI).

Heritage Fungicide 
Page 52 
TABLE 25: Specific Use Directions for Tree Nuts (except Almonds, Pecans, and 
Pistachios) 
Crop Target Diseases 
Use Rate 
oz 
product/A 
(lb ai/A) 
Use Rate 
oz 
product/0.5 
A 
(lb ai/A) 
Use 
Rate 
oz 
product/ 
1,000 sq 
ft Application Instructions 
Tree Nuts 
 
Beechnut 
Brazil nut 
Butternut 
Cashew 
Chestnut 
Chinquapin 
Filbert 
Hickory 
Macadamia 
Walnut 
 
Almonds, 
Pecans, 
Pistachios: 
see specific 
use 
instructions. 
Alternaria leaf 
and fruit spot 
(Alternaria 
alternata) 
Anthracnose 
(Colletotrichum 
acutatum, 
Glomerella 
cingulata) 
Eastern filbert 
blight 
(Anisogramma 
anomale) 
Late blight 
(Alternaria 
alternata) 
Scab 
(Cladosporium 
carpophilum) 
Septoria leaf 
spot 
(Septoria 
pistaciarum) 
Shothole 
(Wilsonomyces 
carpophilus) 
3.2-6.4 
(0.10-
0.20) 
1.6-3.2 
(0.10-0.20) 
0.08-
0.15 
Resistance Management: 
Follow the resistance 
management guidelines in 
the Resistance 
Management section. Do 
not apply more than two 
sequential applications of 
Heritage Fungicide or other 
Group 11 fungicides before 
alternation with a fungicide 
that is not in Group 11. 
 
Begin Heritage Fungicide 
applications prior to disease 
development and continue 
throughout the disease 
development period 
following the resistance 
management guidelines. 
Applications may be made 
by ground, air or 
chemigation. An adjuvant 
may be added at specified 
rates. 
 
For all other diseases, begin 
applications prior to disease 
development and continue at 
7- to 21-day intervals 
throughout the disease 
development period. 
Blossom blight 
(Monilinia laxa, 
M. fructicola) 
6.4 
(0.20) 
3.2 
(0.20) 
0.15 For blossom blight, begin 
applications at early bloom 
and continue through petal 
fall. Do not make more than 
six applications of Heritage 
Fungicide or other strobilurin 
fungicide per acre per year. 
Specific Use Restrictions: 
• Do not apply more than 1.2 lb ai/A per year of azoxystrobin-containing products. 
• Do not apply within 45 days of harvest (45-day PHI).

Heritage Fungicide 
Page 53 
TABLE 26: Specific Use Instructions for Tropical Fruit 
Crop 
Target 
Diseases 
Use Rate 
oz product/A 
(lb ai/A) 
Use Rate 
oz 
product/0.5 
A (lb ai/A) 
Use Rate 
oz 
product/1,000 
sq ft 
Application 
Instructions 
Tropical 
Fruit 
Acerola 
Atemoya 
Avocado 
Biriba 
Canistel 
Cherimoya 
Custard 
apple 
Feijoa 
Guava 
Ilama 
Jaboticaba 
Jackfruit 
Longan 
Loquat 
Lychee 
Mango 
Papaya 
Passionfruit 
Pawpaw 
Persimmon 
Pulasan 
Pummello 
Rambutan 
Sapodilla 
Sapote, 
black 
Sapote, 
mamey 
Sapote, 
white 
Soursop 
Star apple 
Starfruit 
Sugar 
apple 
Spanish 
lime 
Tamarind 
Uniq fruit 
Alternaria leaf 
and fruit spot 
(Alternaria 
spp.) 
Anthracnose 
(Colletotrichum 
spp.) 
Cercospora leaf 
spot 
(Cercospora 
spp.) 
Powdery mildew 
(Erysiphe spp.) 
Rust 
(Puccinia spp.) 
 
3.2-8.0 
(0.1-0.25) 
1.6-4.0 
(0.1-0.25) 
0.08-0.18 Resistance 
Management: 
Follow the 
resistance 
management 
guidelines in the 
Resistance 
Management 
section. Do not 
apply more than 
two sequential 
applications of 
Heritage Fungicide 
or other Group 11 
fungicides before 
alternation with a 
fungicide that is not 
in Group 11. 
 
Begin Heritage 
Fungicide 
applications prior to 
disease 
development and 
continue throughout 
the disease 
development period 
on a 10- to 14-day 
schedule, following 
the resistance 
management 
guidelines. 
Applications may 
be made by ground, 
air or chemigation. 
An adjuvant may be 
added at specified 
rates. 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. 
• May be applied the day of harvest (0-day PHI).

Heritage Fungicide 
Page 54 
VEGETABLE AND HERB PLANTS 
 
RESTRICTION: Apply to vegetable and herb plants grown for retail sale to consumers 
only. 
 
TABLE 27: Specific Use Directions for Asparagus Plants 
Crop Target Diseases 
Use Rate 
oz product/ 
1,000 sq ft 
Use Rate 
oz product/ 
5,000 sq ft Application Instructions 
Asparagus Stemphyllium 
purple spot 
(Stemphyllium 
vesicarium) 
0.075-0.18 
 
0.375-0.9 Resistance Management: Do not 
apply more than one application of 
Heritage Fungicide or other Group 
11 fungicides before alternation with 
a fungicide that is not in Group 11. 
 
Begin Heritage Fungicide 
applications prior to disease 
development and continue 
throughout plant production on a 7- 
to 14-day schedule, following the 
resistance management guidelines. 
Applications may be made by foliar 
sprays, including chemigation. An 
adjuvant may be added at specified 
rates. Use a minimum of 10 gallons 
of water per acre. 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. 
• Do not apply within 100 days of harvest (100-day PHI). 
• A use rate of 0.18 oz product/1,000 sq ft is equal to 0.25 lb ai/A.

Heritage Fungicide 
Page 55 
TABLE 28: Specific Use Directions for Brassica Head and Stem Subgroup Plants 
Crop 
Target 
Diseases 
Use Rate 
oz product/ 
1,000 sq ft 
(lb ai/A) 
Use Rate 
oz product/ 
5,000 sq ft Application Instructions 
Brassica 
Head and stem 
subgroup 
 
Broccoli 
Chinese broccoli 
[gai lon] 
Brussels sprouts 
Cabbage 
Chinese 
cabbage 
[napa] 
Chinese mustard 
cabbage 
[gai choy] 
Cauliflower 
Cavalo broccolo 
Kohlrabi 
 
including all 
cultivars and/or 
hybrids of these 
Alternaria leaf 
spot 
(Alternaria 
spp.) 
Downy mildew 
(Peronospora 
parasitica) 
Pin rot 
(Alternaria 
spp.) 
0.08-0.18 
(0.1-0.25) 
0.4-0.9 Resistance Management: 
Do not apply more than one 
application of Heritage 
Fungicide or other Group 11 
fungicides before alternation 
with a fungicide that is not in 
Group 11. 
 
Begin Heritage Fungicide 
applications prior to disease 
development and continue 
throughout plant production on 
a 7- to 14-day schedule, 
following the resistance 
management guidelines. 
 
Applications may be made by 
foliar sprays including 
chemigation. An adjuvant may 
be added at specified rates. 
Use a minimum of 10 gallons 
of water per acre. 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. 
• May be applied the day of harvest (0-day PHI).

Heritage Fungicide 
Page 56 
TABLE 29: Specific Use Directions for Brassica Leafy Greens Subgroup Plants 
Crop Target Diseases 
Use Rate 
oz 
product/ 
1,000 sq ft 
(lb ai/A) 
Use Rate 
oz 
product/ 
5,000 sq ft Application Instructions 
Brassica 
Leafy greens 
subgroup 
 
Broccoli raab 
Cabbage, 
Chinese 
Collards 
Kale 
Mizuna 
Mustard greens 
Mustard spinach 
Rape greens 
 
including all 
cultivars and/or 
hybrids of these 
 
Black spot 
(Alternaria 
spp.) 
Cercospora leaf 
spot 
(Cercospora 
spp.) 
White rust 
(Albugo 
candida) 
 
 
0.08-0.18 
(0.1-0.25) 
0.4-0.9 Resistance Management: Follow 
the resistance management 
guidelines in the Resistance 
Management section. Do not 
apply more than one application of 
Heritage Fungicide or other Group 
11 fungicides before alternation 
with a fungicide that is not in 
Group 11. 
 
Begin Heritage Fungicide 
applications prior to disease 
development and continue 
throughout plant production on a 
7- to 14-day schedule, following 
the resistance management 
guidelines. 
 
Applications may be made by 
foliar sprays including 
chemigation. An adjuvant may be 
added at specified rates. Use a 
minimum of 10 gallons of water 
per acre. 
Specific Use Restrictions: 
• Do not apply more than 0.75 lb ai/A per year of azoxystrobin-containing products. 
• May be applied the day of harvest (0-day PHI).

Heritage Fungicide 
Page 57 
TABLE 30: Specific Use Directions for Bulb Vegetable Plants 
Crop Target Diseases 
Use Rate 
oz product/ 
1,000 sq ft 
(lb ai/A) 
Use Rate 
oz. 
product/ 
5,000 sq ft Application Instructions 
Bulb 
Vegetables 
 
Garlic 
Leek 
Onion, bulb 
Onion, 
green 
Welsh 
onion 
Shallot 
Foliar Diseases 
Cladosporium 
leaf blotch 
(Cladosporium 
allii) 
Purple blotch 
(Alternaria 
porri) 
Rust 
(Puccinia allii) 
White rot 
(Sclerotium 
cepivorum) 
0.08-0.15 
(0.1-0.20) 
0.4-0.75 Resistance Management: Do not 
apply more than one application of 
Heritage Fungicide or other Group 11 
fungicides before alternation with a 
fungicide that is not in Group 11. 
 
For downy mildew, make preventative 
applications on a 5- to 7-day schedule. 
For all other diseases, begin Heritage 
Fungicide applications prior to disease 
development and continue throughout 
plant production every 7-14 days, 
following the resistance management 
guidelines. 
 
Applications may be made by foliar 
sprays including chemigation. An 
adjuvant may be added at specified 
rates. 
 
Mixtures of Heritage Fungicide with 
insecticides and silicone adjuvants 
should be tested for crop safety before 
application to the crop. 
Botrytis leaf blight 
(Botrytis aclada) 
Downy mildew 
(Peronospora 
destructor) 
 
 
0.11-0.18 
(0.15-0.25) 
0.55-0.9 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. 
• May be applied the day of harvest (0-day PHI).

Heritage Fungicide 
Page 58 
TABLE 31: Specific Use Directions for Celery Plants 
Crop Target Diseases 
Use Rate 
oz product/ 
1,000 sq ft 
(lb ai/A) 
Use Rate 
oz 
product/ 
5,000 sq ft Application Instructions 
Celery Early blight 
(Cercospora apii) 
Late blight 
(Septoria apicola) 
 
For additional 
diseases, see Leafy 
Vegetables. 
0.11-0.18 
(0.15-0.25) 
0.55-0.9 Resistance Management: Do not 
apply more than one application of 
Heritage Fungicide or other Group 
11 fungicides before alternation with 
a fungicide that is not in Group 11. 
 
Begin Heritage Fungicide 
applications prior to disease 
development and continue 
throughout plant production every 7-
14 days, following the resistance 
management guidelines. 
 
Applications may be made by foliar 
sprays including chemigation. An 
adjuvant may be added at specified 
rates. 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. 
• May be applied the day of harvest (0 day PHI).

Heritage Fungicide 
Page 59 
TABLE 32: Specific Use Directions for Cucurbit Plants 
 
Crop Target Diseases 
Use Rate 
oz 
product/ 
1,000 sq ft 
(lb ai/A) 
Use Rate 
oz 
product/ 
5,000 sq 
ft Application Instructions 
Cucurbits 
 
Cantaloupe 
Chayote 
Chinese-
waxgourd 
Cucumber 
Gourds 
Honeydew 
Melons 
Momordica 
spp. 
(bitter 
melon, 
balsam 
apple) 
Muskmelon 
Watermelon 
Pumpkin 
Squash 
Zucchini 
 
including 
cultivars 
and/or hybrids 
of these 
Anthracnose 
(Colletotrichum 
lagenarium) 
Belly Rot 
(Rhizoctonia solani) 
Downy Mildew 
(Pseudoperonospora 
cubensis) 
Gummy Stem Blight 
(Didymella bryoniae) 
Leaf spots 
(Alternaria spp., 
Cercospora spp.) 
Myrothecium canker 
(Myrothecium 
roridum) 
Plectosporium blight 
(Plectosporium 
tabacinum) 
Powdery Mildew 
(Podosphaera 
xanthii, 
 
Erysiphe 
cichoracearum) 
Ulocladium leaf spot 
(Ulocladium 
cucurbitae) 
 
0.08-0.18 
(0.10-0.25) 
0.4-0.9 Resistance Management: Do 
not apply more than one 
application of Heritage Fungicide 
or other Group 11 fungicides 
before alternation with a 
fungicide that is not in Group 11. 
Do not make more than four (4) 
foliar applications of Heritage 
Fungicide or other Group 11 
fungicides per crop per acre per 
year. 
 
For both downy and powdery 
mildew, make preventative 
applications on a 5- to 7-day 
schedule. For belly rot control, 
make the first application at the 
1- to 3-leaf crop stage with a 
second application just prior to 
vine tip over or 10-14 days later, 
whichever occurs first. For all 
other diseases, begin Heritage 
Fungicide applications prior to 
disease development and 
continue throughout plant 
production every 7-14 days, 
following the resistance 
management guidelines. 
 
Applications may be made by 
foliar sprays, including 
chemigation. 
 
An adjuvant may be added at 
specified rates. However, do not 
tank-mix Heritage Fungicide with 
COC, MSO or silicon adjuvants. 
 
Do not tank-mix Heritage 
Fungicide with malathion, 
methomyl, potassium laurate, or 
dicloran containing products. 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb ai/A per year of azoxystrobin -containing products.

Heritage Fungicide 
Page 60 
 
 
 
TABLE 33: Specific Use Directions for Herb and Spice Plants 
Crop Target Diseases 
Use Rate 
oz product/ 
1,000 sq ft 
(lb ai/A) 
Use Rate 
oz product/ 
5,000 sq ft 
Application 
Instructions 
Herbs & Spices 
(except basil and 
black pepper) 
Allspice; Angelica; 
Anise (seed); Anise, 
star; Annatto; Balm; 
Borage; Burnet; 
Camomile; Caper 
(buds); Caraway; 
Caraway, black; 
Cardamom; Cassia 
(buds); Catnip; 
Celery seed; Chervil 
(dried); Chive; Chive, 
Chinese; Cinnamon; 
Clary; Clove (buds); 
Coriander (cilantro or 
Chinese parsley) 
(leaf); Coriander 
(seed); Costmary; 
Culantro (leaf and 
seed); Cumin; Curry 
(leaf); Dill (seed); 
Dillweed; Fennel, 
common; Fennel, 
Florence (seed); 
Fenugreek; Grains of 
paradise; 
Horehound; Hyssop; 
Juniper (berry); 
Lavender; 
Lemongrass; Lovage 
(leaf and seed); 
Mace; Marigold; 
Marjoram; Mustard 
(seed), Nasturtium; 
Nutmeg; Oregano; 
Parsley (dried); 
Pennyroyal; Pepper, 
white; Poppy seed; 
Rosemary; Rue; 
Saffron; Sage; 
Savory, summer and 
winter; Sweet bay; 
Tansy; Tarragon; 
Alternaria leafspot 
(Alternaria spp.) 
Corynespora blight 
(Corynespora 
cassiicola) 
Downy mildew 
(except Basil) 
(Plasmopara spp., 
Peronospora spp.) 
Dill blight 
(Cercosporidium 
punctum) 
Phoma blight 
(Passalora puncta) 
Powdery mildew 
(Erysiphe spp., 
Podosphaera spp.) 
 
0.08-0.18 
(0.1-0.25) 
0.4-0.9 Resistance 
Management: Do not 
apply more than two 
sequential applications 
of Heritage Fungicide or 
other Group 11 
fungicides before 
alternation with a 
fungicide that is not in 
Group 11. 
 
Begin Heritage 
Fungicide applications 
at the onset of disease 
development and 
continue throughout 
plant production on a 7-
day schedule, following 
the resistance 
management 
guidelines. 
 
Applications may be 
made by foliar sprays. 
An adjuvant may be 
added at specified 
rates. Use a minimum 
of 30 gallons of water 
per acre. 
• Do not apply within 1 day of harvest (1-day PHI).

Heritage Fungicide 
Page 61 
Thyme; Vanilla; 
Wintergreen; 
Woodruff; 
Wormwood 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. 
• May be applied the day of harvest (0-day PHI). 
• Do not apply by aerial application.

Heritage Fungicide 
Page 62 
TABLE 34: Specific Use Directions for Basil Plants 
Crop 
Target 
Diseases 
Use Rate 
oz product/ 
1,000 sq ft 
(lb ai/A) 
Use Rate 
oz product/ 
5,000 sq ft Application Instructions 
Basil Downy mildew 
(Peronospora 
belbahrii) 
 
0.18 
(0.25) 
0.9 Plug Production*: Apply to 
emerged plants in plug production 
trays prior to disease 
development. Apply uniformly to 
foliage using a minimum of 3.4 
gallons of water/5,000 sq ft (30 
gallons/A). Make no more than 
one application during the plug 
production phase. Follow the 
Heritage Fungicide application 
with alternative chemistries on a 
weekly schedule, implementing a 
preventative integrated disease 
management program. 
 
Finish Production**: Apply to 
plants following transplant of 
plugs to trays, pots or containers 
in which plants are grown to 
finish. Apply uniformly to foliage 
using a minimum of 3.4 gallons of 
water/5,000 sq ft (30 gallons/A). 
Make no more than one 
application during the finish 
production phase. Follow the 
Heritage Fungicide application 
with alternative chemistries on a 
weekly schedule, implementing a 
preventative integrated disease 
management program. For 
specific resistance management 
programs, contact your state 
Extension specialist. 
 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. 
• May be applied the day of harvest (0-day PHI). 
* Plug production refers to the production of a young plant grown from seed in a multi -celled germination 
tray for a short period of time. After growing to a desired size, the plug is then transplanted in a larger pot 
or container to grow to a larger size suitable to sell. 
** Finish production refers to the production of a finished plant grown to a desired size suitable to sell in a 
garden center, large format retailer, or other retailers selling plants to consumers for home and garden 
plantings.

Heritage Fungicide 
Page 63 
TABLE 35: Specific Use Directions for Leafy Vegetable Plants (except Brassica) 
 
Crop Target Diseases 
Use Rate 
oz product/ 
1,000 sq ft 
(lb ai/A) 
Use Rate 
oz product/ 
5,000 sq ft Application Instructions 
Leafy 
Vegetables 
(except 
Brassica) 
 
Amaranth 
Arugula 
Cardoon 
Celery 
Celtuce 
Chervil 
Chrysanthemum, 
edible 
Coriander, 
leaves 
(Cilantro) 
Corn salad 
Cress 
Dandelion 
Dock 
Endive 
Fennel 
Lettuce, head 
and leaf 
Orach 
Parsley 
Purslane 
Radicchio 
Rhubarb 
Spinach 
Swiss Chard 
 
including 
cultivars and/or 
hybrids of these 
Foliar Diseases 
Alternaria leaf spot 
(Alternaria sonchi, 
A. spp.) 
Anthracnose 
(Microdochium 
panattonianum, 
Colletotrichum 
dematium) 
Cercospora leaf 
spot 
(Cercospora spp.) 
Septoria leaf spot 
(Septoria 
petroselini) 
White rust 
(Albugo 
occidentalis) 
0.08-0.18 
(0.1-0.25) 
0.4-0.9 Resistance Management: 
Do not apply more than one 
application of Heritage 
Fungicide or other Group 11 
fungicides before alternation 
with a fungicide that is not in 
Group 11. 
 
For both downy and 
powdery mildew, make 
preventative applications on 
a 5- to 7-day schedule. For 
all other diseases, begin 
Heritage Fungicide 
applications prior to disease 
development and continue 
throughout plant production 
every 7-14 days following 
the resistance management 
guidelines. 
 
Applications may be made 
by foliar sprays including 
chemigation. An adjuvant 
may be added at specified 
rates. 
 
ATTENTION: Applications 
of Heritage Fungicide to 
leafy vegetable foliage have 
contributed to phytotoxicity 
under certain 
circumstances. Proceed 
with caution with regard to 
tank mixes and adjuvants 
when treating all leafy 
vegetables with Heritage 
Fungicide. Heritage 
Fungicide must not be tank-
mixed on leaf lettuce with 
permethrin, fosetyl-al, 
lambda-cyhalothrin, or 
another product that may 
increase the penetration of 
Heritage Fungicide into the 
Downy mildew 
(Bremia lactucae) 
Powdery mildew 
(Eyrisiphe 
cichoracearum) 
0.15-0.18 
(0.2-0.25) 
0.75-0.9

Heritage Fungicide 
Page 64 
 
 
 
 
TABLE 36: Specific Use Directions for Mint Plants 
Crop Target Diseases 
Use Rate 
oz product/ 
1,000 sq ft 
(lb ai/A) 
Use Rate 
oz product/ 
5,000 sq ft Application Instructions 
Mint 
(Fresh) 
Powdery mildew 
(Erysiphe spp.) 
Rust 
(Puccinia 
menthae) 
 
0.08-0.18 
(0.1-0.25) 
0.4-0.9 Resistance Management: Do not 
apply more than two sequential 
applications of Heritage Fungicide or 
other Group 11 fungicides before 
alternation with a fungicide that is not 
in Group 11. 
 
Begin Heritage Fungicide 
applications prior to disease 
development and continue 
throughout plant production on a 7- 
to 10-day schedule, following the 
resistance management guidelines. 
 
Applications may be made by foliar 
sprays including chemigation. An 
adjuvant may be added at specified 
rates. 
Specific Use Restrictions: 
• Do not apply more than 0.75 lb ai/A per year of azoxystrobin-containing products. 
• For fresh mint, may be applied the day of harvest (0-day PHI). 
 
leaf surface, such as, but 
not limited to, silicone 
wetters. 
Specific Use Restrictions: 
• Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. 
• May be applied the day of harvest (0-day PHI).

Heritage Fungicide 
Page 65 
TABLE 37: Specific Use Directions for Pepper and Other Fruiting Vegetable 
Plants (except Cucurbits) 
Crop Target Diseases 
Use Rate 
oz product/ 
1,000 sq ft 
(lb ai/A) 
Use Rate 
oz 
product/ 
5,000 sq 
ft Application Instructions 
Peppers and 
other Fruiting 
Vegetables 
(except 
cucurbits) 
Bell Pepper 
Non-Bell 
Pepper 
Sweet Non-
Bell 
Pepper 
Eggplant 
Groundcherry 
Okra 
Pepino 
Tomatillo 
 
See specific 
directions for 
use for 
Tomatoes. 
Anthracnose 
(Colletotrichum 
spp.) 
Cercospora leaf 
spot 
(Cercospora 
capsici) 
Downy mildew 
(Peronospora 
tabacini) 
Powdery mildew 
Leveillula taurica 
0.08-0.18 
(0.1-0.25) 
 
0.4-0.9 
 
Resistance Management: 
Follow the resistance 
management guidelines in the 
Resistance Management 
section. Do not apply more than 
one application of Heritage 
Fungicide or other Group 11 
fungicides before alternation with 
a fungicide that is not in Group 
11. 
 
Begin Heritage Fungicide 
applications prior to disease 
development and continue 
throughout plant production on a 
7- to 14-day schedule, following 
the resistance management 
guidelines. 
 
Applications may be made by 
foliar sprays including 
chemigation. An adjuvant may 
be added at specified rates. 
Specific Use Restrictions: 
• Do not apply more than 1.0 lb ai/A per year of azoxystrobin-containing products. 
• May be applied the day of harvest (0-day PHI).

Heritage Fungicide 
Page 66 
TABLE 38: Specific Use Directions for Tomato Plants 
Crop Target Diseases 
Use Rate 
oz product/1,000 
sq ft 
(lb ai/A) 
Use Rate 
oz product/ 
5,000 sq ft Application Instructions 
Tomatoes Anthracnose 
(Colletotrichum 
coccodes) 
Black Mold 
(Alternaria 
alternata) 
Buckeye Rot 
(Phytophthora 
spp.) 
Early Blight 
(Alternaria solani) 
Powdery Mildew 
Leveillula 
tauricaSeptoria Leaf 
spot 
(Septoria 
lycopersici) 
Target spot 
(Corynespora 
cassiicola) 
0.024-0.08 
(0.08-0.10) 
0.12-0.4 Resistance Management: 
Do not apply more than one 
application of Heritage 
Fungicide or other Group 11 
fungicides before alternation 
with a fungicide that is not in 
Group 11. 
 
Begin Heritage Fungicide 
applications prior to disease 
development and continue 
throughout plant production 
following the resistance 
management guidelines. 
For late blight, apply 
Heritage Fungicide at 5- to 
7-day intervals. For all other 
tomato diseases, apply 
Heritage Fungicide on 7- to 
21-day intervals. 
 
Applications may be made 
by foliar sprays including 
chemigation. 
 
Under certain environmental 
conditions (particularly high 
temperatures), Heritage 
Fungicide in combination 
with high rates of silicone-
containing or oil-containing 
(petroleum or crop) additives 
or adjuvants may cause 
injury. Do not exceed 
0.125% adjuvant (v/v). 
Consult a Syngenta 
representative for more 
information concerning 
additives or adjuvants. 
 
A tank mixture with 
dimethoate may cause crop 
injury. 
 
Do not use adjuvants or tank 
mix Heritage Fungicide with 
any emulsifiable concentrate 
(EC) product. 
Late Blight 
(Phytophthora 
infestans) 
0.08 
(0.10) 
0.4 
Specific Use Restrictions:

Heritage Fungicide 
Page 67 
• Do not apply Heritage Fungicide until 35 days after seeding or 21 days after transplanting plugs to 
larger pots or containers. 
• Do not apply more than 0.6 lb ai/A per year of azoxystrobin-containing products. 
• May be applied the day of harvest (0-day PHI). 
 
 
TABLE 39: Heritage Rate Conversion Chart 
(For use with 4 oz package size only) 
 
 
oz product/A 
oz product/ 
1,000 sq ft 
Treated Acres/ 
4 oz product 
1.0 0.025 4.0 
1.5 0.035 2.7 
2.0 0.05 2.0 
2.5 0.06 1.6 
3.0 0.07 1.3 
3.5 0.08 1.1 
4.0 0.09 1.0 
4.5 0.1 0.9 
5.0 0.11 0.8 
5.5 0.13 0.73 
6.0 0.14 0.67 
6.5 0.15 0.62 
7.0 0.16 0.57 
7.5 0.17 0.53 
8.0 0.18 0.5 
8.7 0.2 0.46 
13.1 0.3 0.31 
17.4 0.4 0.23

Heritage Fungicide 
Page 68 
 
STORAGE AND DISPOSAL 
 
Do not contaminate water, food, or feed by storage or disposal. 
 
Pesticide Storage 
Store in original containers only. Keep container closed when not in use. Do not store 
near food or feed. In case of spill on floor or paved surfaces, sweep and remove to 
chemical waste storage area until proper disposal can be made if product cannot be 
used according to the label. 
 
Pesticide Disposal 
Pesticide wastes are acutely hazardous. Improper disposal of excess pesticide, spray 
mixture, or rinsate is a violation of Federal law. If these wastes cannot be disposed of 
by use according to label instructions, contact your State Pesticide or Environmental 
Control Agency, or the Hazardous Waste representative of the nearest EPA Regional 
Office for guidance. 
 
Container Handling [(less than or equal to 50 pounds)] 
Non-refillable container. Do not reuse or refill this container. Triple rinse container (or 
equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining 
contents into application equipment or a mix tank. Fill the container ¼ full with water 
and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank 
or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to 
drip. Repeat this procedure two more times. Then offer for recycling if available or 
puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures 
approved by state and local authorities. 
 
Container Handling [(bags)] 
Non-refillable container. Do not reuse or refill this container. Completely empty bag 
into application equipment. Then offer for recycling if available or dispose of empty bag 
in a sanitary landfill, or by incineration, or by other procedures approved by state and 
local authorities. 
 
CONTAINER IS NOT SAFE FOR FOOD, FEED, OR DRINKING WATER. 
 
 
Heritage®, the ALLIANCE FRAME 
the SYNGENTA Logo and the PURPOSE ICON 
are Trademarks of a Syngenta Group Company. 
 
©20XX Syngenta 
 
For non-emergency (e.g., current product information), call 
Syngenta Crop Protection at 1-866-796-4368.

Heritage Fungicide 
Page 69 
 
Manufactured for: 
Syngenta Crop Protection, LLC 
P. O. Box 18300 
Greensboro, North Carolina 27419-8300 
 
 
Heritage Fungicide 1093 MAS 0316 AMEND-E 0519-CL – jab- 7/23/25 
000100-01093.20190515E.HERITAGE FUNGICIDE.AMEND.MAY2019-CL