crop-chem-docs/corpus/epa_ppls/100-1737.md

# Orondis Gold DC

- EPA Reg No: **100-1737**
- Registrant: SYNGENTA CROP PROTECTION, LLC
- Signal word: Caution
- Active ingredients: Metalaxyl-M (10.1%); Oxathiapiprolin (3.37%)
- Label accepted: 2023-12-04
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000100-01737-20231204.pdf

---
Registration Notice Unconditional v.20220527 
 
 
 
U.S. ENVIRONMENTAL PROTECTION AGENCY 
Office of Pesticide Programs 
Registration Division (7505T) 
1200 Pennsylvania Ave., N.W. 
Washington, D.C. 20460 
 
EPA Reg. Number: 
 
100-1737 
 
Date of Issuance: 
 
12/4/23 
NOTICE OF PESTICIDE: 
 X Registration 
 Reregistration 
 
Term of Issuance: 
Unconditional 
 (under FIFRA, as amended) 
Name of Pesticide Product: 
Orondis® Gold DC 
 
Name and Address of Registrant (include ZIP Code): 
Syngenta Crop Protection, LLC 
P. O. Box 18300 
Greensboro, NC 27419 
 
Note: Changes in labeling differing in substance from that accepted in connection with this registration must be submitted to and accepted by the 
Registration Division prior to use of the label in commerce. In any correspondence on this product always refer to the above EPA registration number. 
 
On the basis of information furnished by the registrant, the above named pesticide is hereby registered 
under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA). 
 
Registration is in no way to be construed as an endorsement or recommendation of this product by the 
Agency. In order to protect health and the environment, the Administrator, on his motion, may at any 
time suspend or cancel the registration of a pesticide in accordance with the Act. The acceptance of 
any name in connection with the registration of a product under this Act is not to be construed as 
giving the registrant a right to exclusive use of the name or to its use if it has been covered by others. 
 
This product is unconditionally registered in accordance with FIFRA section 3(c)(5) provided that you: 
 
1. Submit and/or cite all data required for registration/reregistration/registration review of your 
product when the Agency requires all registrants of similar products to submit such data. 
 
 
Continues page 2 
 
Signature of Approving Official: 
 
 
 
Stephanie Suarez, Ph.D., Acting Product Manager 21 
Fungicide Branch, Registration Division (7505T) 
 
Date: 
 
 
 12/4/23 
EPA Form 8570-6

Page 2 of 2 
EPA Reg. No. 100-1737 
Case No. 480008 
 
2. Make the following label changes before you release the product for shipment: 
 
• Revise the EPA Registration Number to read, “EPA Reg. No. 100-1737.” 
• Add an appropriate EPA Establishment Number and Net Contents information. 
 
3. Submit one copy of the final printed label for the record before you release the product for 
shipment. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please be 
aware that the website becomes labeling under FIFRA and is subject to review by the Agency. If the 
website is false or misleading, the product would be misbranded and unlawful to sell or distribute 
under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) lists examples of statements EPA may consider 
false or misleading. In addition, regardless of whether a website is referenced on your product’s label, 
claims made on the website may not substantially differ from those claims approved through the 
registration process. Therefore, should the Agency find or if it is brought to our attention that a 
website contains false or misleading statements or claims substantially differing from the EPA 
approved registration, the website will be referred to the EPA’s Office of Enforcement and Compliance. 
 
If these conditions are not complied with, the registration will be subject to cancellation in accordance 
with FIFRA section 6. Your release for shipment of the product constitutes acceptance of these 
conditions. A stamped copy of the label is enclosed for your records. 
 
The record for this product currently contains the following CSF(s): 
 
• Basic CSF dated 3/24/2023 
• Alternate CSF 1 dated 3/24/2023 
 
If you have any questions, please contact Carmen Swinger at swinger.carmen@epa.gov. 
 
 
Enclosure

1 
 
[Master Label] 
[Start of Front Panel] 
OXATHIAPIPROLIN GROUP 49 FUNGICIDE 
MEFENOXAM GROUP 4 FUNGICIDE 
 
Orondis® Gold DC 
 
 
Fungicide 
 
 
Active Ingredient: 
Oxathiapiprolin
1: ................................................................................................... 3.37% 
Mefenoxam2: ...................................................................................................... 10.1% 
Other Ingredients: 86.53% 
Total: 100.00% 
 
1CAS No. 1003318-67-9 
2CAS Nos. 70630-17-0 and 69516-34-3 
 
Orondis
® Gold DC is formulated as a dispersible concentrate (DC) and contains 0.29 lb of 
oxathiapiprolin and 0.88 lb of mefenoxam per gallon. 
 
KEEP OUT OF REACH OF CHILDREN. 
 
CAUTION / PRECAUCIÓN 
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. 
(If you do not understand the label, find someone to explain it to you in detail). 
 
 
See additional precautionary statements and directions for use [on label] [inside booklet]. 
 
EPA Reg. No. 100-XXXX 
EPA Est. 
 
 
_____ 
Net Contents 
[End of Front Panel] 
 
12/04/2023
100-1737

2 
 
TABLE OF CONTENTS 
 
1.0 FIRST AID 
PRECAUTIONARY STATEMENTS 
2.0 PRECAUTIONARY STATEMENTS 
2.1 Hazards to Humans and Domestic Animals 
2.2 Personal Protective Equipment (PPE) 
2.3 User Safety Requirements 
2.4 Engineering Controls 
2.5 User Safety Recommendations 
2.6 Environmental Hazards 
2.6.1 GROUNDWATER ADVISORY 
2.6.2 SURFACE WATER ADVISORY 
2.7 Physical or Chemical Hazards 
DIRECTIONS FOR USE 
3.0 PRODUCT INFORMATION 
3.1 Resistance Management 
3.2 Integrated Pest Management (IPM) 
4.0 APPLICATION DIRECTIONS 
4.1 Methods of Application 
4.1.1 SOIL APPLICATIONS (IN-FURROW OR BANDED) 
4.2 Application Equipment 
4.2.1 SHIELDED SPRAYERS 
4.3 Application Volume and Spray Coverage 
4.4 Mixing Directions 
4.4.1 ORONDIS GOLD DC ALONE 
4.4.2 TANK-MIX PRECAUTIONS 
4.4.3 TANK-MIX COMPATIBILITY 
4.4.4 ORONDIS GOLD DC IN TANK MIXTURES 
4.5 Application through Irrigation Systems (Chemigation) 
4.5.1 APPLICATION INSTRUCTIONS FOR IRRIGATION SYSTEMS 
4.5.2 OPERATING INSTRUCTIONS FOR CHEMIGATION 
4.5.3 SPECIFIC INSTRUCTIONS FOR PUBLIC WATER SYSTEMS 
4.6 Sprayer Cleanout 
5.0 ROTATIONAL CROP RESTRICTIONS 
6.0 RESTRICTIONS AND PRECAUTIONS 
6.1 Use Restrictions 
6.2 Spray Drift Management 
6.2.1 GROUND BOOM APPLICATIONS 
6.3 Spray Drift Advisories 
6.3.1 IMPORTANCE OF DROPLET SIZE

3 
 
6.3.2 CONTROLLING DROPLET SIZE – GROUND BOOM 
6.3.3 BOOM HEIGHT – GROUND BOOM 
6.3.4 SHIELDED SPRAYERS 
6.3.5 TEMPERATURE AND HUMIDITY 
6.3.6 TEMPERATURE INVERSIONS 
6.3.7 WIND 
7.0 CROP USE DIRECTIONS 
7.1 Berries 
7.1.1 BUSHBERRY, CROP SUBGROUP 13-07B (EXCEPT LOWBUSH BLUEBERRY) 
7.1.2 CANEBERRY, CROP SUBGROUP 13-07A 
7.1.3 STRAWBERRY 
7.2 Cucurbit Vegetables, Crop Group 9 
7.3 Fruiting Vegetables, Crop Group 8-10 
7.4 Ginseng 
7.5 Hops 
7.6 Leafy Greens, Crop Subgroup 4-16A 
7.7 Potato and Other Tuberous and Corm Vegetables, Crop Subgroup 1C 
7.8 Specific Tropical and Subtropical Fruits 
7.9 Stalk and Stem Vegetables, Crop Subgroup 22A (except Celtuce, Fennel, and Kohlrabi) 
7.10 Tobacco 
7.11 Tree Nuts, Crop Group 14-12 
8.0 STORAGE AND DISPOSAL 
9.0 CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY 
10.0 APPENDIX [Optional Text] 
10.1 Orondis Gold DC Rate Conversion Chart 
10.2 Orondis Gold DC Use Summary Table

4 
 
1.0 FIRST AID 
FIRST AID 
If in eyes  Hold eye open and rinse slowly and gently with water for 15-20 
minutes. 
 Remove contact lenses, if presen t, after the first 5 minutes, then 
continue rinsing eye. 
 Call a poison control center or doctor for treatment advice. 
If swallowed  Call a poison control center or doctor immediately for treatment 
advice. 
 Have person sip a glass of water if able to swallow. 
 DO NOT induce vomiting unless told to do so by a poison control 
center or doctor. 
 DO NOT give anything by mouth to an unconscious person. 
If on skin or 
clothing 
 Take off contaminated clothing. 
 Rinse skin immediately with plenty of water for 15-20 minutes. 
 Call a poison control center or doctor for treatment advice. 
NOTE TO PHYSICIAN: 
Probable mucosal damage may contraindicate the use of gastric lavage. 
Have the product container or label with you when calling a poison control center or doctor, 
or going for treatment. 
HOTLINE NUMBER 
For 24-Hour Medical Emergency Assistance (Human or Animal) 
Or Chemical Emergency Assistance (Spill, Leak, Fire or Accident) 
Call 
1-800-888-8372 
 
PRECAUTIONARY STATEMENTS 
 
2.0 PRECAUTIONARY STATEMENTS 
2.1 Hazards to Humans and Domestic Animals 
CAUTION / PRECAUCIÓN 
 Causes moderate eye irritation. Harmful if swallowed. Harmful if absorbed through skin. 
Avoid contact with skin, eyes, or clothing. Wash thoroughly with soap and water after 
handling and before eating, drinking, chewing gum, using tobacco, or using the toilet. 
Remove and wash contaminated clothing before reuse.

5 
 
2.2 Personal Protective Equipment (PPE) 
Mixers, loaders, applicators, and other handlers must wear: 
 Protective eyewear (goggles, face shield, or safety glasses) 
 Long-sleeved shirt and long pants 
 Shoes and socks 
 Chemical-resistant gloves made of barrier laminate, butyl rubber ≥ 14 mils, nitrile rubber ≥ 
14 mils, neoprene rubber ≥ 14 mils, polyvinyl chloride (PVC) ≥ 14 mils, or Viton™ ≥ 14 
mils 
 
2.3 User Safety Requirements 
Discard clothing and other absorbent materials that have been drenched or heavily 
contaminated with this product's concentrate. DO NOT reuse them. Follow the 
manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for 
washables exist, use detergent and hot water. Keep and wash PPE separately from other 
laundry. 
 
2.4 Engineering Controls 
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the 
requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [(40 
CFR 170.240(d)(4-6))], the handler PPE requirements may be reduced or modified as 
specified in the WPS. 
 
2.5 User Safety Recommendations 
User Safety Recommendations 
 
Users should: 
 Remove clothing/PPE immediately if pesti cide gets inside. Then wash thoroughly 
and put on clean clothing. 
 Remove PPE immediately after handling th is product. Wash the outside of gloves 
before removing. As soon as possible, wash thoroughly and change into clean 
clothing. 
 
2.6 Environmental Hazards 
This product is toxic to aquatic invertebrates. For terrestrial uses: DO NOT apply directly to 
water, to areas where surface water is present, or to intertidal areas below the mean high-
water mark. DO NOT apply when weather conditions favor drift from treated areas. DO NOT 
contaminate water when disposing of equipment washwater or rinsate.

6 
 
2.6.1 GROUNDWATER ADVISORY 
Mefenoxam has properties and characteristics associated with chemicals detected in 
groundwater. This chemical may leach into groundwater if used in areas where soils are 
permeable, particularly where the water table is shallow. 
 
2.6.2 SURFACE WATER ADVISORY 
This product may contaminate water through spray drift due to wind. This product has a high 
potential for runoff for several months or more after application. Poorly draining soils and 
soils with shallow water tables are more prone to produce runoff that contains this product. A 
level, well-maintained vegetative buffer strip between areas to which this product is applied 
and surface water features including ponds, streams, and springs will reduce the potential for 
contamination of water from rainfall runoff. Runoff of this product will be reduced by avoiding 
applications when rainfall is forecast to occur within 48 hours. 
 
2.7 Physical or Chemical Hazards 
DO NOT mix or allow to come in contact with oxidizing agent and water. Hazardous chemical 
reaction may occur. 
 
DIRECTIONS FOR USE 
It is a violation of federal law to use this product in a manner inconsistent with its labeling. 
 
DO NOT apply this product in a way that will contact workers or other persons, either directly 
or through drift. Only protected handlers may be in the area during application. For any 
requirements specific to your state or tribe, consult the agency responsible for pesticide 
regulation. 
 
Orondis Gold DC must be used only in accordance with instructions on this label, in 
separately issued labeling or exemptions under FIFRA (Supplemental Labels, Special Local 
Need Registrations, FIFRA Section 18 Exemptions), or as otherwise permitted by FIFRA. 
Always read the entire label, including the Conditions of Sale and Limitation of Warranty and 
Liability. 
 
FAILURE TO FOLLOW DIRECTIONS AND PRECAUTIONS ON THIS LABEL MAY 
RESULT IN CROP INJURY, POOR DISEASE CONTROL, OR ILLEGAL RESIDUES. 
 
AGRICULTURAL USE REQUIREMENTS 
 
Use this product only in accordance with its labeling and with the Worker Protection 
Standard, 40 CFR Part 170. This Standard contains requirements for the protection of 
agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of 
agricultural pesticides. It contains requirements for training, decontamination, notification,

7 
 
and emergency assistance. It also contains specific instructions and exceptions pertaining 
to the statements on the label about personal protective equipment (PPE), restricted-entry 
interval, and notification to workers (as applicable). The requirements in this box only apply 
to uses of this product that are covered by the Worker Protection Standard. 
 
DO NOT enter or allow worker entry into treated areas during the restricted-entry 
interval (REI) of 48 hours. 
 
Exception: If the product is soil-injected or soil-incorporated, the Worker Protection 
Standard, under certain circumstances, allows workers to enter the treated area 
immediately if there will be no contact with anything that has been treated. 
 
PPE required for early entry to treated areas that is permitted under the Worker Protection 
Standard and that involves contact with anything that has been treated, including plants, 
soil, or water, is: 
 Protective eyewear (goggles, face shield, or safety glasses) 
 Coveralls 
 Shoes and socks 
 Chemical-resistant gloves made of barrier laminate, butyl rubber ≥ 14 mils, nitrile rubber 
≥ 14 mils, neoprene rubber ≥ 14 mils, polyvinyl chloride (PVC) ≥ 14 mils, or Viton ≥ 14 
mils 
 
3.0 PRODUCT INFORMATION 
Read all label directions before use. All applications must be made according to the use 
directions that follow. 
 
 Orondis Gold DC contains oxathiapiprolin and mefenoxam and is for the control or 
suppression of the diseases listed on this label. 
 Orondis Gold DC is active against Oomyce te diseases listed on this label and has 
preventive, residual, eradicative, and anti-sporulant activity. 
 Orondis Gold DC is locally systemic, translaminar, and moves systemically in the xylem. 
 See Section 7.0 for specific crop/disease directions. 
 
MODE OF ACTION 
Orondis Gold DC contains two active ingredients: oxathiapiprolin, which inhibits an 
oxysterol-binding protein (OSBP) homologue, and mefenoxam, which inhibits RNA 
polymerase I. 
 
CROP TOLERANCE 
Not all crops within a crop group, and not all varieties, cultivars, or hybrids of crops, have 
been individually tested for crop safety. It is not possible to evaluate for crop safety all 
applications of Orondis Gold DC on all crops within a crop group, on all varieties, cultivars, 
or hybrids of those crops, or under all environmental conditions and growing circumstances. 
To test for crop safety, apply the product in accordance with the label instructions to a small 
area of the target crop to ensure that a phytotoxic response will not occur, especially where

8 
 
the application is a new use of the product by the applicator. 
 
3.1 Resistance Management 
 
For resistance management, please note that Orondis Gold DC contains both a Group 49 
[(oxathiapiprolin)] and Group 4 [(mefenoxam)] fungicide. Any fungal population may contain 
individuals naturally resistant to Orondis Gold DC and other Group 49 or Group 4 fungicides. 
A gradual or total loss of pest control may occur over time if these fungicides are used 
repeatedly in the same fields. Appropriate resistance management strategies both general 
and product-specific must be followed. 
 
Strategies to delay resistance: 
 
 Rotate the use of Orondis Gold DC or other Group 49 and 4 fungicides within a growing 
season sequence with different groups that control the same pathogens. 
 Use tank mixtures with fungici de(s) from a different group that are equally effective on the 
target pest when such use is permitted. Use at least the minimum application rate labeled 
by the manufacturer. 
 Adopt an integrated diseas e management program for fungicide use that includes 
scouting, uses historical information related to pesticide use and crop rotation, and which 
considers host plant resistance, impact of environmental conditions on disease 
development, disease thresholds, as well as cultural, biological, and other chemical 
control practices. 
 Where possible, make use of predictive di sease models to effectively time fungicide 
applications. Note that using predictive models alone is not sufficient to manage 
resistance. 
 Monitor treated fungal populati ons for resistance development. 
 Contact your local extension specialist or ce rtified crop advisor for any additional pesticide 
resistance-management and/or Integrated Pest Management (IPM) directions for specific 
crops and pathogens. 
 For further information or to report suspected resistance, contact Syngenta Crop 
Protection at 1-866-796-4368. You can also contact your pesticide distributor or university 
extension specialist to report resistance. 
 
Product-specific strategies to delay resistance: 
 
 Orondis Gold DC applications are to be made preventively. 
 DO NOT tank-mix Orondis Gold DC with any fungicide for which resistance to the target 
disease has developed. 
 DO NOT make more than 2 sequential applications before rotating to a fungicide with a 
different mode of action. 
 Where 3 or more fungici de applications are made, DO NOT use Orondis Gold DC (or any 
other FRAC 49-containing product) in more than 33% of the total fungicide applications, or 
a maximum of 4 applications, whichever is fewer. Where less than 3 fungicide 
applications are made, DO NOT make more than 1 application of Orondis Gold DC (or 
any other FRAC 49-containing product). 
 DO NOT follow soil applications of Orondis Gold DC (or any other FRAC 49-containing

9 
 
product) with foliar applications of Orondis Opti (EPA Reg. No. 100-1591) or Orondis Ultra 
(EPA Reg. No. 100-1612) (or any other FRAC 49-containing product). 
 DO NOT combine different application methods (foliar and soil) when protecting a crop 
during a growing season. 
 DO NOT apply more than 4 sprays during one crop cycle. 
 DO NOT apply more than 6 applications of Orondis Gold DC (or any other FRAC 49-
containing product) per year on the same acreage. 
 DO NOT use Orondis Gold DC (or any other FRAC-49 containing product) in nursery 
production of transplanted crops. 
 For guidance on a particular crop or disease cont rol situation, consult your state extension 
specialist for official state directions.

10 
 
3.2 Integrated Pest Management (IPM) 
Syngenta advises the use of Integrated Pest Management (IPM) programs to control pests. 
Orondis Gold DC may be used as part of an IPM program which can include biological, 
cultural, and genetic practices aimed at preventing economic pest damage. Application of 
this product must be based on IPM principles and practices including field scouting or other 
detection methods, correct target pest identification, population monitoring, and treating when 
disease forecasting models reach locally determined action levels. Consult your state 
cooperative extension service, professional consultants, or other qualified authorities to 
determine the appropriate management, cultural practice, and treatment threshold levels for 
the specific crop, geography, and diseases. 
4.0 APPLICATION DIRECTIONS 
4.1 Methods of Application 
 For suppression or control of soil-borne diseases as specified in this label, Orondis Gold 
DC must be applied in a manner that ensures the product solution adequately saturates 
the target crop root/crown zone. 
 When applied to the root/crown zone bef ore, during, or soon after sowing or 
transplanting the crop, Orondis Gold DC will suppress or control certain seedling root rot 
and crown diseases that limit crop stand establishment. 
 For soil application, apply Orondis Gold DC using chemigation, transplant water 
application (water wheel or continuous stream transplanters), surface band or directed 
application, or in-furrow application using the rates in Table 1. See table and Section 
4.5 for chemigation instructions. 
 If the application method does not move the product to the target root/crown disease 
zone, the application must be followed with irrigation or cultivation to correctly place 
the product for disease control. 
 Use Orondis Gold DC as a foliar applicati on only where specified in this label. 
 
4.1.1 SOIL APPLICATIONS (IN-FURROW OR BANDED) 
In-furrow application: 
 Apply Orondis Gold DC as an in-furrow spra y in 5-15 gallons of water per acre at 
planting. 
 Mount the spray nozzle so the spray is di rected into the furrow just before the seeds 
are covered. 
 
Table 1: Soil application rates for Orondis Gold DC/1,000 feet of row, based on plant 
row spacing 
Orondis Gold DC Conversion Chart for Drip (Trickle) Chemigation, 
Continuous Transplant Water, and Direct/Banded/In-Furrow Application 
Corresponding 
field rate 
fl oz/A 
(lb ai) 
Rate in fl oz product/1,000 row ft; 
based on planted row spacing (in inches) of: 
30” 34” 36” 48” 60” 72” 84” 
7.0 0.4 0.45 0.48 0.6 0.8 0.96 1.1

11 
 
 
Transplant Water Application 
 Transplants must be adequately watered befor e transplanting. Ensure transplant 
water volume is sufficient to thoroughly wet the root zone. 
 See Table 1 for continuous-stream transplanters. Ensure 4-8 fl oz transplant water/ 
transplant depending on sandy (4 fl oz) vs silty soil (6-8 fl oz). 
 For water-wheel transplanters, use the plant population to determine the rate of 
product per plant. 
 
Example: 
 
28.0 fl oz product x acre = 0.0064 fl oz product 
acre 4,356 plants plant 
 
Surface Band or Directed Application 
 Apply in a 6- to 12-inch band. See Table 1 for rates. 
 Follow application with cultivation or irrigat ion (0.25 – 0.5 inch) to move Orondis Gold DC 
to the target disease zone. 
 
4.2 Application Equipment 
Orondis Gold DC can be applied using ground equipment, pressurized and hand-held 
sprayers, and chemigation equipment, except as otherwise directed. Maintain agitation 
during mixing and application to ensure uniform product suspension. 
4.2.1 SHIELDED SPRAYERS 
 Shielding the boom or i ndividual nozzles can reduce the effects of wind. 
 It is the responsibility of th e applicator to verify that t he shields are minimizing drift 
potential and not interfering with uniform deposition of the product. 
(0.02 lb ai 
oxathiapiprolin; 
0.05 lb ai 
mefenoxam) 
14.0 
(0.03 lb ai 
oxathiapiprolin; 
0.10 lb ai 
mefenoxam) 
0.8 0.9 0.96 1.28 1.6 1.9 2.2 
20.0 
(0.05 lb ai 
oxathiapiprolin; 
0.14 lb ai 
mefenoxam) 
1.14 1.3 1.37 1.83 2.3 2.7 3.2 
28.0 
(0.06 lb ai 
oxathiapiprolin; 
0.19 lb ai 
mefenoxam) 
1.6 1.8 1.9 2.57 3.2 3.85 4.5

12 
 
 
4.3 Application Volume and Spray Coverage 
See Section 4.1 for information and Section 7.0 for directions on specific crops. 
 
4.4 Mixing Directions 
4.4.1 ORONDIS GOLD DC ALONE 
1. Fill clean spray tank 1/ 2 - 2/3 full of water. 
2. While agitating, add the r equired amount of Orondis Gold DC, continuing agitation until 
the product is completely dispersed. 
3. Continue agitation while adding the remainde r of the water. Spray immediately after 
preparation, continuing agitation during spraying. 
 
4.4.2 TANK-MIX PRECAUTIONS 
 It is the pesticide user’s responsibility to ens ure that all products are registered for the 
intended use. Read and follow the applicable restrictions, limitations, and directions for 
use on all product labels involved in tank mixing. User must follow the most restrictive 
directions for use and precautionary statements of each product in the tank mixture. 
 Tank mixes of Orondis Gold DC with other pesti cides, fertilizers, or any other additives not 
specifically labelled for use with Orondis Gold DC may result in tank-mix incompatibility or 
unsatisfactory performance. In such cases, always check tank-mix compatibility by 
conducting a jar test according to guidance in Section 4.4.3 before actual tank mixing. 
 
4.4.3 TANK-MIX COMPATIBILITY 
 Conduct a jar test using a 1 pt to 1 qt cont ainer with lid by adding water or other intended 
carrier including liquid fertilizer to the jar. 
 Next, add the appropriate amount of pesticide(s) or tank-mix partner(s) in their relative 
proportions based on specified label rates. Add tank-mix components separately in the 
order described in the tank-mixing section, Section 4.4.4. After each addition, shake or 
stir gently to thoroughly mix. 
 After all ingredients have been added, put the lid on the jar, then tighten and invert the jar 
10 times to mix. 
 After mixing, let the mixture stand 15–30 minutes and then examine for signs of 
incompatibility including obvious separation, large flakes, precipitates, gels, or heavy oily 
film on the jar. 
 If the mixture remains mixed or can be remixed readily, it is physically compatible and can 
be used. 
 If the mixture is incompatible , repeat the test using a compatibility agent at the specified 
label rate. Or, if applicable, slurry dry formulations in water before adding to the jar. If 
incompatibility is still observed after following these procedures, DO NOT use the mixture. 
 After compatibility testing is complete, dispose of any pesticide wastes in accordance with 
the storage and disposal section, Section 8.0, of this label.

13 
 
 
4.4.4 ORONDIS GOLD DC IN TANK MIXTURES 
 Always follow the tank-mix instructions of the most restrictive product label. 
 Apply at least the minimum labeled rate of each pesticide in the tank-mix. 
 Consult a Syngenta representativ e or local agricultural authorities for more information 
concerning tank mixtures. 
 When using a tank-mix, add different formulat ion types in the sequence indicated below. 
Allow time for complete mixing and dispersion after addition of each product. 
1. Water-soluble bag (WSB) 
2. Water-soluble granules (SG) 
3. Water-dispersible granules (WG) 
4. Wettable powders (WP) 
5. Water-based suspension concentrates (SC) 
6. Capsule suspensions (CS) 
7. Dispersible concentrates (DC) (Orondis Gold DC) 
8. Suspo-emulsions (SE) 
9. Oil dispersions (OD) 
10. Emulsion in water (EW) 
11. Emulsifiable concentrates (EC) 
12. Water-soluble concentrates (SL) 
13. Adjuvants, surfactants, oils 
14. Soluble fertilizers 
15. Drift retardants 
 
4.5 Application through Irrigation Systems (Chemigation) 
4.5.1 APPLICATION INSTRUCTIONS FOR IRRIGATION SYSTEMS 
 Use only on crops where chemigation is specified on this label. 
 Apply this product only through center-pivot , solid-set, hand-move, moving-wheel, drip 
(trickle), or strip tubing irrigation systems. DO NOT apply this product through any other 
type of irrigation system. 
 [ DO NOT inject Orondis Gold DC at full strength or deterioration of valves and seals may 
occur. Use a dilution ratio of at least 15 parts water to 1 part Orondis Gold DC in 
the mix tank. Orondis Gold DC can affect many seal materials. Leather seals are best. 
EPDM or silicone rubber seals can be used but must be replaced once a year. DO NOT 
use Viton, nitrile (Buna-N), polyurethane, Neoprene, or PVC seals.] 
 Crop injury, lack of effectiveness, or illegal pe sticide residues in the crop can result from 
non-uniform distribution of treated water. 
 Apply Orondis Gold DC use rates in 0.25-0.5 inches of water per acre. Excessive water 
may reduce efficacy. 
 If you have questions about calibration, cont act state extension service specialists, 
equipment manufacturers, or other experts. 
 DO NOT connect an irrigation system (including greenhouse systems) used for pesticide 
application to a public water system unless the pesticide label-prescribed safety devices 
for public water systems are in place.

14 
 
 A person knowledgeable of the chemigation system and responsible for its operation, or 
under the supervision of the responsible person, shall shut the system down and make 
necessary adjustments if the need arises. 
 
Center-Pivot Irrigation Equipment 
Restrictions: (1) Use only with drive systems which provide uniform water distribution. (2) 
DO NOT use end guns when chemigating Orondis Gold DC through center-pivot systems 
because of non-uniform application. 
 
Irrigation Instructions: 
 Determine the size of the area to be treated. 
 Determine the time required to apply 0.25-0.5 in ch of water over the area to be treated 
when the system and injection equipment are operated at normal pressures as specified 
by the equipment manufacturer. When applying Orondis Gold DC through irrigation 
equipment, use the lowest obtainable water volume while maintaining uniform distribution. 
Run the system at 80-95% of the manufacturer’s rated capacity. 
 Using water, determine the injection pump output when operated at normal line pressure. 
 Determine the amount of Orondis Gold DC requi red to treat the area covered by the 
irrigation system. 
 Add the required amount of Orondis Gold DC and sufficient water to meet the injection 
time requirements to the solution tank. 
 Make sure the system is fu lly charged with water before starting injection of the Orondis 
Gold DC solution. Time the injection to last at least as long as it takes to bring the system 
to full pressure. 
 Maintain constant solution tank agitation during the injection period. 
 Continue to operate the system until the Orondis Gold DC solution has cleared the 
sprinkler head. 
 
Solid-Set, Hand-Move, and Moving-Wheel Irrigation Equipment 
 Determine the acreage covered by the sprinklers. 
 Fill injector solution tank with water and adjust fl ow rate to use the contents over a 20- to 
30-minute interval. When applying Orondis Gold DC through irrigation equipment, use the 
lowest obtainable water volume while maintaining uniform distribution. 
 Determine the amount of Orondis Gold DC requi red to treat the area covered by the 
irrigation system. 
 Add the required amount of Orondis Gold DC into the same quantity of water used to 
calibrate the injection period. 
 Operate the system at the same pressure and time interval established during the 
calibration. 
 Stop injection equipment after treatment is completed. Continue to operate the system 
until the Orondis Gold DC solution has cleared the last sprinkler head. 
 
Drip (Trickle) Irrigation Instructions 
 Orondis Gold DC must be applied in a manner that ensures the product is in the root 
zone. 
 Orondis Gold DC must be in the root zone to pr ovide effective control of target pests.

15 
 
 Orondis Gold DC is most effective when it is applied so that the roots are at or near the 
site of application; manage irrigation so that significant quantities of Orondis Gold DC 
remain in the root zone. 
 A pesticide tank is advised for the applicat ion of Orondis Gold DC in drip chemigation 
systems. 
 Ensure the drip chemigation system is oper ating properly to uniformly distribute the 
chemigation application to the crop. Contact the equipment manufacturer, the local 
university extension agent, or other experts if you have questions about achieving uniform 
distribution of the application. This product must be applied uniformly in the root zone or 
poor performance may result. Drip tape or emitters must be located within or directly 
adjacent to the root zone. 
 In most situations, this product must be applied during the middle 1/3 of the irrigation 
cycle. 
 The minimum injection period is the time that it takes water to move from the injection 
point to the farthest emitter in the irrigation zone (propagation time). If this time is not 
known, it can be calculated by measuring the time required for a soluble dye to move from 
the injection point to the farthest emitter. A longer injection period improves uniformity 
throughout the zone but requires at least an equal period for water to flush the system and 
move the product through the soil. 
 
4.5.2 OPERATING INSTRUCTIONS FOR CHEMIGATION 
1. The system must contain a functional check va lve, vacuum relief valve, and low pressure 
drain appropriately located on the irrigation pipeline to prevent water source 
contamination from backflow. 
2. The pesticide injection pipeline must contai n a functional, automatic, quick-closing check 
valve to prevent the flow of fluid back toward the injection pump. 
3. The pesticide injection pipeline must also contain a functional, normally closed, solenoid-
operated valve located on the intake side of the injection pump and connected to the 
system interlock to prevent fluid from being withdrawn from the supply tank when the 
irrigation system is either automatically or manually shut down. 
4. The system must contain functional interlo cking controls to automatically shut off the 
pesticide injection pump when the water pump motor stops. 
5. The irrigation line or water pump must include a functional pressure switch which will stop 
the water pump motor when the water pressure decreases to the point where pesticide 
distribution is adversely affected. 
6. Systems must use a metering pump, includ ing a positive displacement injection pump 
(e.g., diaphragm pump), effectively designed and constructed of materials that are 
compatible with pesticides and capable of being fitted with a system interlock. 
7. DO NOT apply when wind speed favors drift beyond the area intended for treatment. 
 
4.5.3 SPECIFIC INSTRUCTIONS FOR PUBLIC WATER SYSTEMS 
1. Public water system means a system for t he provision to the public of piped water for 
human consumption if such system has at least 15 service connections or regularly 
serves an average of at least 25 individuals daily at least 60 days out of the year. 
2. Chemigation systems connect ed to public water systems must contain a functional, 
reduced-pressure zone (RPZ) backflow preventer or the functional equivalent in the

16 
 
water supply line upstream from the point of pesticide introduction. As an option to the 
RPZ backflow preventer, discharge the water from the public water system into a 
reservoir tank prior to pesticide introduction. There shall be a complete physical break 
(air gap) between the outlet end of the fill pipe and the top or overflow rim of the reservoir 
tank of at least twice the inside diameter of the fill pipe. 
3. The pesticide injection pipeline must cont ain a functional, automatic, quick-closing check 
valve to prevent the flow of fluid back toward the injection pump. 
4. The pesticide injection pipeline must c ontain a functional, normally closed, solenoid-
operated valve located on the intake side of the injection pump and connected to the 
system interlock to prevent fluid from being withdrawn from the supply tank when the 
irrigation system is either automatically or manually shut down. 
5. The system must contain functional interlo cking controls to automatically shut off the 
pesticide injection pump when the water pump motor stops, or, in cases where there is 
no water pump, when the water pressure decreases to the point where pesticide 
distribution is adversely affected. 
6. Systems must use a metering device, includ ing a positive displacement injection pump 
(e.g., diaphragm pump), effectively designed and constructed of materials that are 
compatible with pesticides and capable of being fitted with a system interlock. 
7. DO NOT apply when wind speed favors drift beyond the area intended for treatment. 
 
4.6 Sprayer Cleanout 
 Prior to application, start with clean, well-maintained application equipment. 
 Immediately following applic ation, thoroughly clean all spray equipment to reduce the 
risk of forming hardened deposits which might become difficult to remove. 
 Drain application equipment. Thoroughly rinse and flush all application equipment with 
clean water. 
 Take all necessary safety precautions when cleaning equipment. DO NOT clean near 
wells, water sources, or desirable vegetation. Dispose of waste rinse water in accordance 
with local regulations. 
 
5.0 ROTATIONAL CROP RESTRICTIONS 
The following crops may be planted at the specified interval following application of Orondis 
Gold DC.

17 
 
Crop, Crop Group, or Crop Subgroup Plant-back Interval 
Avocados 
Bushberry (Crop Subgroup 13-07B, except 
lowbush blueberry) 
Brassica, Head and Stem (Crop Subgroup 5A) 
Bulb Vegetables (Crop Group 3-07) 
Caneberry (Crop Subgroup 13-07A) 
Cucurbit Vegetables (Crop Group 9) 
Fruiting Vegetables (Crop Group 8-10) 
Ginseng 
Hops 
Herbs and Spices (Crop Group 19) 
Leafy Greens (Crop Subgroup 4-16A) 
Peas, Edible-Podded 
Peas, Succulent Shelled 
Stalk and Stem Vegetables (Crop Subgroup 22A) 
Strawberries 
Sunflower 
Tree Nuts (Crop Group 14-12) 
Tobacco 
Tuberous and Corm Vegetables (Crop Subgroup 
1C) 
0 days 
Cereals (Crop Groups 15 and 16) 
Grass Animal Feeds (Crop Group 17) 30 days 
Legume Vegetables, except succulent shelled and 
edible-podded peas 
Peanuts 
180 days 
Nongrass Animal Feeds (Crop Group 18) 
All other crops not listed 365 days 
 
6.0 RESTRICTIONS AND PRECAUTIONS 
See Section 7.0 for crop-specific restrictions and precautions. 
 
6.1 Use Restrictions 
 DO NOT use Orondis Gold DC in greenhouse production. 
 Maximum usage when applying both metalaxyl - and mefenoxam-containing products to 
the same crop within the same season: DO NOT apply more than the maximum yearly 
total application rate for the active ingredient as stated on the label of the product 
containing the lowest yearly total on that crop. 
 
6.2 Spray Drift Management 
 The interaction of many equipment- and weather-related factors determines the 
potential for spray drift. The applicator is responsible for considering all these factors 
when making application decisions. 
 To avoid spray drift, DO NOT apply when conditions favor drift beyond the target area. 
 Avoid spray overlap, as injury may occur.

18 
 
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT. BE 
AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS. 
 
6.2.1 GROUND BOOM APPLICATIONS 
 Apply with the nozzle height directed by t he manufacturer, but no more than 4 feet above 
the ground or crop canopy. 
 DO NOT apply when wind speeds exceed 10 miles per hour at the application site. 
 DO NOT apply during temperature inversions. 
 
6.3 Spray Drift Advisories 
6.3.1 IMPORTANCE OF DROPLET SIZE 
 An effective way to reduce spray drift is to apply large droplets. Use the largest droplets 
that provide target pest control. 
 While applying larger droplets will reduce spray drift, the potential for drift will be greater if 
applications are made improperly or under unfavorable environmental conditions. 
 
6.3.2 CONTROLLING DROPLET SIZE – GROUND BOOM 
 Volume- Increasing the spray volume so that larger droplets are produced will reduce 
spray drift. Use the highest practical spray volume for the application. If a greater spray 
volume is needed, consider using a nozzle with a higher flow rate. 
 Pressure- Use the lowest spray pressure specified for the nozzle to produce the target 
spray volume and droplet size. 
 Spray Nozzle- Use a spray nozzle that is designed for the intended application. Consider 
using nozzles designed to reduce drift. 
 
6.3.3 BOOM HEIGHT – GROUND BOOM 
 Use the lowest boom height that is compat ible with the spray nozzles that will provide 
uniform coverage. 
 For ground equipment, the boom must remain level with the crop and have minimal 
bounce. 
 
6.3.4 SHIELDED SPRAYERS 
 Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded 
sprayers. 
 Verify that the shields are not interferi ng with the uniform deposition of the spray on the 
target area. 
 
6.3.5 TEMPERATURE AND HUMIDITY 
 When making applications in hot and dry conditi ons, use larger droplets to reduce effects 
of evaporation.

19 
 
6.3.6 TEMPERATURE INVERSIONS 
 Drift potential is high during a temperature inversion. 
 Temperature inversions are characterized by increasing temperature with altitude and 
are common on nights with limited cloud cover and light to no wind. 
 The presence of an inversion can be indica ted by ground fog or by the movement of 
smoke from a ground source or an aircraft smoke generator. 
 Smoke that layers and moves laterally in a concentrated cloud (under low wind 
conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates 
indicates good vertical air mixing. 
 Avoid applications duri ng temperature inversions. 
 
6.3.7 WIND 
 Drift potential increases with wind speed. 
 AVOID APPLICATIONS DURING GUSTY WIND CONDITIONS. 
 Applicators need to be familiar with local wind patterns and terrain that could affect spray 
drift.

20 
 
7.0 CROP USE DIRECTIONS 
7.1 Berries 
7.1.1 BUSHBERRY, CROP SUBGROUP 13-07B (EXCEPT LOWBUSH 
BLUEBERRY) 
Crops (including all cultivars, varieties, and/or hybrids of these) 
Aronia berry[*] 
Blueberry, highbush[*] 
Buffalo currant[*] 
Chilean Guava[*] 
Cranberry, highbush[*] 
Currant, Black[*] 
Currant, Red[*] 
Elderberry[*] 
European barberry[*] 
Gooseberry[*] 
Honeysuckle, edible[*] 
Huckleberry[*] 
Jostaberry[*] 
Juneberry (Saskatoon berry)[*] 
Lingonberry[*] 
Native currant[*] 
Salal[*] 
Sea buckthorn[*] 
Target Disease 
Rate 
(fl oz/A) Application Timing Use Directions 
Phytophthora root rot 
(Phytophthora spp.) 
 
 
 
20.0 – 
55.0** 
Soil Application: 
 
New Plantings: Make the first 
application at planting. 
 
Make a second application at 
least 30 days later, coinciding 
with a period favorable for 
root rot development. 
 
Established Plantings: 
Make the first application 
before plants start to grow in 
the spring. 
 
Make a second application at 
least 30 days later, coinciding 
with a period favorable for 
root rot development. 
 
[(*Not for use in California)] 
 
Apply as a drench, soil-directed 
spray, or through irrigation water 
(micro-sprinkler, drip, or flood). 
 
For effective disease control, 
ensure that the product solution 
thoroughly wets the target root 
zone. If the application method 
does not move the product to the 
root zone, and rain is not 
imminent, then follow with 
irrigation. 
 
See Section 4.1.1 for at-planting 
or transplant water instructions. 
See Section 4.5 for drip irrigation 
instructions. 
 
[Use a higher rate in fields with a 
history of Phytophthora disease.] 
 
[Orondis Gold DC will not 
revitalize plants showing 
moderate to severe root rot 
symptoms.] 
 
Use Orondis Gold DC in 
conjunction with good cultural 
practices to minimize disease. 
**20.0 fl oz is equivalent to 0.05 lb oxathiapiprolin; 0.14 lb mefenoxam 
**55.0 fl oz is equivalent to 0.12 lb oxathiapiprolin; 0.38 lb mefenoxam 
Resistance Management: 
 Refer to Section 3.1. 
Integrated Pest Management: 
 Refer to Section 3.2.

21 
 
USE RESTRICTIONS 
1) Refer to Section 6.1 for additional product use restrictions. 
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed in the table. 
3) Maximum Number of Applications: DO NOT make more than 2 applications at the maximum rate 
per year. 
4) Minimum Application Interval: 30 days 
5) Maximum Annual Rate: 110.0 fl oz/A/year (equivalent to 0.25 lb ai/A/year oxathiapiprolin and 0.76 
lb ai/A/year mefenoxam) 
a) DO NOT apply more than 0.5 lb ai/A/year of soil-applied oxathiapiprolin-containing products. 
b) DO NOT apply more than 3.6 lb ai/A/year of soil-applied mefenoxam- and metalaxyl-containing 
products. 
6) DO NOT use in nursery production of transplanted crops. 
7) Pre-harvest Interval (PHI): 1 day

22 
 
7.1.2 CANEBERRY, CROP SUBGROUP 13-07A 
Crops (including all cultivars, varieties, and/or hybrids of these) 
Blackberry[*] Loganberry[*] Raspberry, red and 
black[*] 
Wild raspberry[*] 
Target Disease 
Rate 
(fl oz/A) Application Timing Use Directions 
Root Rot 
(Phytophthora 
spp.) 
13.7 - 110.0** 
 
 
New Plantings: Make the 
first application at planting. 
 
Make a second application 
during a period favorable 
for root growth and at 
least 7 days after the first 
application. 
 
Established Plantings: 
Make the first application 
before plants start to grow 
in the spring. 
 
Make a second application 
during a period favorable for
root growth and at least 7 
days after the first 
application. 
 
 
[(*Not for use in California)] 
 
Apply as a banded, soil-directed 
spray in a minimum of 20 gal/A of 
water, or via drip or micro-sprinkler 
irrigation. For banded application, 
direct the spray along each side of 
the crop row and direct the 
application to the soil, near and 
under the lower leaves. See 
Section 4.1.1. 
 
[For enhanced control of 
Phytophthora, add a mefenoxam-
containing product to the spray 
mixture. DO NOT exceed a total of 
1.8 lb ai soil-applied mefenoxam 
per application or per year.] 
Orondis Gold DC will not revitalize 
plants showing moderate to severe 
root rot symptoms. 
 
Use Orondis Gold DC in conjunction 
with good cultural practices to 
minimize disease. 
 
**13.7 fl oz is equivalent to 0.03 lb oxathiapiprolin; 0.09 lb mefenoxam 
**110.0 fl oz is equivalent to 0.25 lb oxathiapiprolin; 0.76 lb mefenoxam 
Resistance Management: 
 Refer to Section 3.1. 
Integrated Pest Management: 
 Refer to Section 3.2. 
USE RESTRICTIONS 
1) Refer to Section 6.1 for additional product use restrictions. 
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed in the table. 
3) Maximum Number of Applications: DO NOT make more than 2 applications at the maximum rate 
per year. 
4) Minimum Application Interval: 7 days 
5) Maximum Annual Rate: 220.0 fl oz/A/year (equivalent to 0.5 lb ai/A/year oxathiapiprolin and 1.51 lb 
ai/A/year mefenoxam) 
a) DO NOT apply more than 0.5 lb ai/A/year of oxathiapiprolin-containing products. 
b) DO NOT apply more than 1.8 lb ai/A/year of soil-applied mefenoxam- and metalaxyl-containing 
products. 
6) Pre-harvest Interval (PHI): 45 days

23 
 
7.1.3 STRAWBERRY 
Crops (including all cultivars, varieties, and/or hybrids of these) 
Strawberry 
Target Disease 
Rate 
(fl oz/A) Application Timing Use Directions 
Crown rot 
(Phytophthora 
cactorum) 
 
Red stele root rot 
(Phytophthora 
fragariae) 
 
 
20.0 – 
62.0** 
Soil Application: Make up to 
two applications by drip 
irrigation. 
 
New Plantings: Make the first 
application soon after planting 
when overhead watering for 
plant establishment has been 
completed. 
 
Make a second application 30 
days before the beginning of 
harvest or at fruit set. 
 
Established Plantings: Make 
the first application in the 
spring before first bloom. 
 
Make a second application 
after harvest. 
See Section 4.5 for drip irrigation 
instructions. 
 
[Use a higher rate in fields with a 
history of Phytophthora disease.] 
 
Leather rot 
(Phytophthora 
cactorum) 
7.0 – 
13.9** 
Foliar Application: 
 
Provided that Orondis Gold 
DC was NOT used via soil 
application, 
make up to two foliar/soil-
directed applications: the first 
at fruit set and, if required, a 
second during harvest. 
Apply by ground application or 
overhead chemigation. 
 
[Use a higher rate in fields with a 
history of Phytophthora disease.] 
 
**7.0 fl oz is equivalent to 0.02 lb oxathiapiprolin; 0.05 lb mefenoxam 
**13.9 fl oz is equivalent to 0.03 lb oxathiapiprolin; 0.10 lb mefenoxam 
**20.0 fl oz is equivalent to 0.05 lb oxathiapiprolin; 0.14 lb mefenoxam 
**62.0 fl oz is equivalent to 0.14 lb oxathiapiprolin; 0.43 lb mefenoxam 
Resistance Management: 
 Refer to Section 3.1. 
 Make no more than 2 sequential applications before rotating to a fungicide with a different mode of 
action. 
 DO NOT follow soil applications of Orondis Gold DC (or any other FRAC 49-containing product) with 
foliar applications of another oxathiapiprolin-containing product (or any other FRAC 49-containing 
product). Use either soil applications or foliar applications but not both for disease control. 
 
Integrated Pest Management: 
 Refer to Section 3.2. 
USE RESTRICTIONS 
1) Refer to Section 6.1 for additional product use restrictions. 
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed in the table. 
3) Maximum Number of Applications per Year: 
a) Soil Application: DO NOT make more than 2 applications at the maximum rate per year.

24 
 
b) Foliar/Fruit Application: DO NOT make more than 2 applications at the maximum rate per 
year. 
4) Minimum Application Interval: 30 days 
5) Maximum Annual Rate: 124.0 fl oz/A/year (equivalent to 0.28 lb ai/A/year oxathiapiprolin and 0.85 
lb ai/A/year mefenoxam) 
a) DO NOT apply more than 0.29 lb ai/A/year of soil-applied or 0.06 lb ai/A/year of foliar/soil-
directed oxathiapiprolin-containing products. 
b) DO NOT apply more than 1.5 lb ai/A/year of soil-applied or 0.19 lb ai/A/year of foliar/soil-directed 
mefenoxam- and metalaxyl-containing products. 
6) DO NOT use in nursery production. 
7) Pre-harvest Interval (PHI): 
a) Soil Application: 14 days 
b) Foliar Application: 0 days 
 
7.2 Cucurbit Vegetables, Crop Group 9 
Crops (including all cultivars, varieties, and/or hybrids of these) 
Chayote (fruit) 
Chinese waxgourd (Chinese 
preserving melon) 
Citron melon 
Cucumber 
Gherkin 
Gourd, edible 
Momordica spp. 
Balsam apple 
Balsam pear 
Bitter melon 
Chinese cucumber 
Muskmelon 
Cantaloupe 
Casaba 
Crenshaw melon 
Golden Pershaw melon 
Honeydew melon 
Honey balls 
Mango melon 
Persian melon 
Pineapple melon 
Santa Claus melon 
Snake melon 
True Cantaloupe 
Pumpkin 
 
Squash, summer 
Crookneck Squash 
Scallop Squash 
Straightneck Squash 
Vegetable Marrow 
Zucchini 
Squash, winter 
Acorn Squash 
Butternut Squash 
Calabaza 
Hubbard Squash 
Spaghetti squash 
Watermelon 
Target Disease 
Rate 
(fl oz/A) Application Timing Use Directions 
Damping off 
(Pythium spp.) 
 
Phytophthora 
blight and crown 
rot 
(Phytophthora 
capsici) 
20.0-
55.0** 
At-Planting Soil Application 
by any of the following 
methods: 
 In-furrow 
 Banded surface spray – Apply 
following transplanting or 
during seeding in a 6- to 12-
inch band. 
 Drip irrigation – If using drip 
irrigation on direct-seeded 
crops, delay application until 
after emergence. 
See Section 4.1.1 for directions for 
at-planting applications in-furrow or 
as a banded soil surface spray. 
 
See Section 4.5 for drip irrigation 
instructions. 
 
[For enhanced control of Pythium 
spp., add a mefenoxam-containing 
product to the spray mixture. DO 
NOT exceed 1.0 lb ai soil-applied 
mefenoxam per application or per 
year.] 
 
[If disease pressure is high, use the 
highest specified rate.] 
 
[If disease pressure is high, use the 
shortest interval.]

25 
 
[If disease pressure is high, use the 
shortest interval and highest 
specified rate.] 
 
Downy mildew 
(Peronospora 
cubensis) 
 
Phytophthora 
blight and crown 
rot 
(Phytophthora 
capsici) 
7.0-
12.0** 
Foliar Application: 
Provided that Orondis Gold DC 
was NOT used at planting, make 
up to two foliar applications at 
20- to 30-day intervals. During 
the period between applications 
of Orondis Gold DC, maintain 
disease management with 
sprays of effective fungicide 
products containing FRAC 
codes other than 49 and 4. 
 
Broadcast or Banded Foliar 
Spray: For ground application, 
apply in at least 15 gal/A to ensure 
thorough coverage of the foliage 
and developing fruit. 
 
[If disease pressure is high, use the 
highest specified rate.] 
 
[If disease pressure is high, use the 
shortest interval.] 
 
[If disease pressure is high, use the 
shortest interval and highest 
specified rate.] 
 
**7.0 fl oz is equivalent to 0.02 lb oxathiapiprolin; 0.05 lb mefenoxam 
**12.0 fl oz is equivalent to 0.03 lb oxathiapiprolin; 0.08 lb mefenoxam 
**20.0 fl oz is equivalent to 0.05 lb oxathiapiprolin; 0.14 lb mefenoxam 
**55.0 fl oz is equivalent to 0.12 lb oxathiapiprolin; 0.38 lb mefenoxam 
Resistance Management: 
 Refer to Section 3.1. 
 Make no more than 2 sequential applications before rotating to a fungicide with a different mode of 
action. 
 Where 3 or more applications are made, use Orondis Gold DC (or other FRAC 49-containing 
product) in no more than 33% of the applications, or a maximum of 4 applications, whichever is 
fewer. 
Integrated Pest Management: 
 Refer to Section 3.2. 
Precautions: 
 At-planting and post-planting applications ma y cause some yellowing of cucurbit leaves. 
 Avoid application to cucurbits in transplant water since there is a risk of plant injury. 
USE RESTRICTIONS 
1) Refer to Section 6.1 for additional product use restrictions. 
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed in the table. 
3) Maximum Number of Applications per Year: 
a) Soil Application: DO NOT make more than 1 application at the maximum rate per year. 
b) Foliar/Fruit Application: DO NOT make more than 4 applications at the maximum rate per year. 
4) Minimum Application Interval: 20 days 
5) Maximum Annual Rate: 55.0 fl oz/A/year (equivalent to 0.12 lb ai/A/year oxathiapiprolin and 0.38 lb 
ai/A/year mefenoxam) 
a) DO NOT apply more than 0.5 lb ai/A/year of soil-applied or 0.12 lb ai/A/year of foliar-applied 
oxathiapiprolin-containing products. 
b) DO NOT apply more than 1.0 lb ai/A/year of soil-applied and 0.5 lb ai/A/year of foliar-applied 
mefenoxam- and metalaxyl-containing products. 
6) DO NOT follow soil applications of Orondis Gold DC with foliar applications of Orondis Gold DC (or 
any other FRAC 49-containing product). Use either soil applications or foliar applications but not 
both for disease control. 
7) On multiple plantings in the same year , DO NOT exceed 6 applications per acre per year, ensuring 
that the annual maximum rates are not exceeded. 
8) DO NOT use Orondis Gold DC in nursery production of transplants. 
9) Pre-harvest Interval (PHI): 5 days

26 
 
 
7.3 Fruiting Vegetables, Crop Group 8-10 
Crops (including all cultivars, varieties, and/or hybrids of these) 
African eggplant 
Bush tomato 
Cocona 
Currant tomato 
Eggplant 
Garden huckleberry 
Goji berry 
 
Groundcherry 
Martynia 
Naranjilla 
Okra 
Pea eggplant 
Pepino 
Pepper, bell 
Pepper, non-bell 
Roselle 
Scarlet eggplant 
Sunberry 
Tomatillo 
Tomato 
Tree tomato 
Target Disease 
Rate 
(fl oz/A) Application Timing Use Directions 
Damping off 
(Pythium spp.) 
Phytophthora 
blight and crown 
rot 
(Phytophthora 
capsici) 
20.0-
55.0** 
At-Planting Soil Application 
by any of the following 
methods: 
 In-furrow 
 Transplant water 
 Banded surface spray – 
Apply following 
transplanting or during 
seeding in a 6- to 12-inch 
band. 
 Drip irrigation – If using drip 
on direct-seeded crops, 
delay application until after 
emergence. 
 
See Section 4.1.1 for directions for 
at-planting applications in-furrow, as 
a banded soil surface spray, or in 
transplant water. 
 
See Section 4.5 for drip irrigation 
instructions. 
 
[For enhanced control of Pythium 
spp., add a mefenoxam-containing 
product to the spray mixture. DO 
NOT exceed 0.5 lb ai soil-applied 
mefenoxam per application and 1.5 
lb ai soil-applied mefenoxam per 
year.] 
 
[If disease pressure is high, use the 
highest specified rate.] 
 
[If disease pressure is high, use the 
shortest interval.] 
 
[If disease pressure is high, use the 
shortest interval and highest 
specified rate.] 
 
Damping off 
(Pythium spp.) 
 
Late blight 
(Phytophthora 
infestans) 
 
Phytophthora blight 
and crown rot 
(Phytophthora 
capsici) 
7.0-12.0** Post-Planting Soil-Directed 
Application (provided that 
Orondis Gold DC was NOT 
used at planting): 
 All fruiting vegetables 
listed except tomato: 
Make up to two post-directed 
applications at a 30-day 
interval after transplanting. 
 Tomato: Make the first 
application 4-6 weeks after 
planting and, if needed, a 
second application up to 4 
weeks before harvest, but 
before the last irrigation. 
Banded Spray: Direct the spray to 
the base of the plants and cover 6-8 
inches of the soil on either side of 
the plants. Incorporate mechanically 
or sprinkler-irrigate to move the 
product into the root zone. 
 
Shank Application: Apply in liquid 
fertilizer, shanked in to either side of 
the plant. Position injector just 
below the root system to allow 
developing roots to expand and 
come in contact with Orondis Gold 
DC.

27 
 
 
During the period between 
applications of Orondis Gold 
DC, maintain disease 
management with sprays of 
effective fungicide products 
containing FRAC codes other 
than 49 and 4. 
 
[If disease pressure is high, use the 
highest specified rate.] 
 
[If disease pressure is high, use the 
shortest interval.] 
 
[If disease pressure is high, use the 
shortest interval and highest 
specified rate.] 
 
 
**7.0 fl oz is equivalent to 0.02 lb oxathiapiprolin; 0.05 lb mefenoxam 
**12.0 fl oz is equivalent to 0.03 lb oxathiapiprolin; 0.08 lb mefenoxam 
**20.0 fl oz is equivalent to 0.05 lb oxathiapiprolin; 0.14 lb mefenoxam 
**55.0 fl oz is equivalent to 0.12 lb oxathiapiprolin; 0.38 lb mefenoxam 
Resistance Management: 
 Refer to Section 3.1. 
 Make no more than 2 sequential applications before rotating to a fungicide with a different mode of 
action. 
 Where 3 or more applications are made, use Orondis Gold DC (or other FRAC 49-containing product) 
in no more than 33% of the applications or a maximum of 4 applications, whichever is fewer. 
Integrated Pest Management: 
 Refer to Section 3.2. 
USE RESTRICTIONS 
1) Refer to Section 6.1 for additional product use restrictions. 
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed in the table. 
3) Maximum Number of Applications per Year: 
a) Soil Application: DO NOT make more than 1 application at the maximum rate per year. 
b) Foliar/Fruit Application: DO NOT make more than 4 applications at the maximum rate per year. 
4) Minimum Application Interval: 
a) All fruiting vegetables listed except tomato: 30 days 
b) Tomato: 28 days 
5) Maximum Annual Rate: 55.0 fl oz/A/year (equivalent to 0.12 lb ai/A/year oxathiapiprolin and 0.38 lb 
ai/A/year mefenoxam) 
a) DO NOT apply more than 0.5 lb ai/A/year of soil-applied or 0.12 lb ai/A/year of foliar-applied 
oxathiapiprolin-containing products. 
b) DO NOT apply more than 1.5 lb ai/A/year of soil-applied and 0.5 lb ai/A/year of foliar-applied 
mefenoxam- and metalaxyl-containing products. 
6) DO NOT follow soil applications of Orondis Gold DC with foliar applications of Orondis Gold DC (or 
any other FRAC 49-containing product). Use either soil applications or foliar applications but not both 
for disease control. 
7) On multiple plantin gs in the same year, DO NOT exceed 6 applications per acre per year, ensuring 
that the annual maximum rates are not exceeded. 
8) DO NOT use Orondis Gold DC in nursery production of transplants. 
9) Pre-harvest Interval (PHI): 7 days

28 
 
7.4 Ginseng 
Crops (including all cultivars, varieties, and/or hybrids of these) 
Ginseng 
Target Disease 
Rate 
(fl oz/A) Application Timing Use Directions 
Phytophthora root rot 
(Phytophthora 
cactorum) 
28.0-48.0** Make a soil drench 
application as soon as 
plants begin growing in 
the spring. 
 
Ideally, time the 
application prior to a 
forecast precipitation. 
 
Apply uniformly to the soil surface. 
Drench in a sufficient volume (at least 
100-200 gal/A) to move the product 
into the root zone. Use a higher 
drench volume when making 
applications to beds with straw mulch. 
 
In the absence of precipitation within 
24 hours of application, and if 
overhead irrigation is available, 
provide 0.25-0.5 inch of water. 
 
[Use a higher rate in areas with a 
history of Phytophthora.] 
 
Follow the soil application of Orondis 
Gold DC with a foliar program of 
other products effective against 
Phytophthora root rot. 
 
 
**28.0 fl oz is equivalent to 0.06 lb oxathiapiprolin; 0.19 lb mefenoxam 
**48.0 fl oz is equivalent to 0.11 lb oxathiapiprolin; 0.33 lb mefenoxam 
Resistance Management: 
 Refer to Section 3.1. 
Integrated Pest Management: 
 Refer to Section 3.2. 
USE RESTRICTIONS 
1) Refer to Section 6.1 for additional product use restrictions. 
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed in the table. 
3) Maximum Number of Applications per Year: DO NOT make more than 1 application at the 
maximum rate per year. 
4) Maximum Annual Rate: 48.0 fl oz/A/year (equivalent to 0.11 lb ai/A/year oxathiapiprolin and 0.33 lb 
ai/A/year mefenoxam) 
a) DO NOT apply more than 0.5 lb ai/A/year of oxathiapiprolin-containing products. 
b) DO NOT apply more than 0.38 lb ai/A/year of mefenoxam- and metalaxyl-containing products. 
5) DO NOT follow soil applications of Orondis Gold DC with foliar applications of Orondis Gold DC (or 
any other FRAC 49-containing product). 
6) Pre-harvest Interval (PHI): 14 days

29 
 
7.5 Hops 
Crops (including all cultivars, varieties, and/or hybrids of these) 
Hops [(Not for use in California)] 
Target Disease 
Rate 
(fl oz/A) Application Timing Use Directions 
Downy mildew 
(soil/crown phase) 
(Pseudoperonospora 
humuli) 
 
Phytophthora root rot 
(Phytophthora spp.) 
20.0-
36.0** 
Soil Application: 
 
New Plantings 
 
Make a single soil 
application at planting. 
 
Established Plantings 
 
Make a single soil 
application as soon as 
plants begin growing in 
the spring. 
 
Apply as a drench, soil-directed spray, or 
through irrigation water (micro-sprinkler 
or drip). 
 
For effective disease control, ensure that 
the product solution thoroughly wets the 
target root zone. If the application 
method does not move the product to 
the root zone, and rain is not imminent, 
then follow with irrigation. 
 
See Section 4.1.1 for at-planting 
instructions. See Section 4.5 for drip 
irrigation instructions. 
 
Use a higher rate in fields with a history 
of disease. 
 
Use Orondis Gold DC in conjunction with 
good cultural practices to minimize 
disease. 
Downy mildew 
(Pseudoperonospora 
humuli) 
7.0 – 12** Foliar Application: 
 
Provided that Orondis 
Gold DC was NOT used 
via soil application, 
make up to three foliar 
applications on 7- to 10-
day interval, beginning 
prior to disease 
development. 
Apply by ground, air assisted, or air blast 
application. Use sufficient volume to 
provide thorough coverage of the foliage 
and increase the volume as plants 
develop. 
 
The addition of a spreading/penetrating 
type of adjuvant (including a non-ionic 
surfactant, organosilicone, or blend) at 
labeled agricultural use rates may 
enhance disease control. 
 
Use a higher rate when conditions are 
favorable for disease development, for 
longer application intervals, or for 
susceptible varieties. 
**7.0 fl oz is equivalent to 0.02 lb oxathiapiprolin; 0.05 lb mefenoxam 
**12.0 fl oz is equivalent to 0.03 lb oxathiapiprolin; 0.08 lb mefenoxam 
**20.0 fl oz is equivalent to 0.05 lb oxathiapiprolin; 0.14 lb mefenoxam 
**36.0 fl oz is equivalent to 0.08 lb oxathiapiprolin; 0.25 lb mefenoxam 
Resistance Management: 
 Refer to Section 3.1. 
 Make no more than 2 sequential applications before rotating to a fungicide with a different mode of 
action. 
 DO NOT follow soil applications of Orondis Gold DC (or any other FRAC 49-containing product) with 
foliar applications of another oxathiapiprolin-containing product (or any other FRAC 49-containing 
product). Use either soil applications or foliar applications but not both for disease control. 
 Where 3 or more applications are made, use Orondis Gold DC (or other FRAC 49-containing product) 
in no more than 33% of the applications, or a maximum of 3 applications, whichever is fewer.

30 
 
Integrated Pest Management: 
 Refer to Section 3.2. 
USE RESTRICTIONS 
1) Refer to Section 6.1 for additional product use restrictions. 
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed in the table. 
3) Maximum Number of Applications per Year: 
a) Soil Application: DO NOT make more than 1 application at the maximum rate per year. 
b) Foliar/Fruit Application: DO NOT make more than 3 applications at the maximum rate per year. 
4) Minimum Application Interval: 7 days 
5) Maximum Annual Rate: 36.0 fl oz/A/year (equivalent to 0.08 lb ai/A/year oxathiapiprolin and 0.25 lb 
ai/A/year mefenoxam) 
a) DO NOT apply more than 0.25 lb ai/A/year of soil-applied or 0.09 lb ai/A/year of foliar-applied 
oxathiapiprolin-containing products. 
b) DO NOT apply more than 0.25 lb ai/A/year of soil-applied and 0.5 lb ai/A/year of foliar-applied 
mefenoxam- and metalaxyl-containing products. 
6) Pre-harvest Interval (PHI): 45 days 
 
7.6 Leafy Greens, Crop Subgroup 4-16A 
Crops (including all cultivars, varieties, and/or hybrids of these) 
Amaranth, Chinese 
Amaranth, leafy 
Aster, Indian 
Blackjack 
Cat’s whiskers 
Cham-chwi 
Cham-na-mul 
Chervil, fresh leaves 
Chipilin 
Chrysanthemum, garland 
Cilantro, fresh leaves 
Corn salad 
Cosmos 
 
Dandelion, leaves 
Dang-gwi, leaves 
Dillweed 
Dock 
Dol-nam-mul 
Ebolo 
Endive 
Escarole 
Fameflower 
Feather cockscomb 
Good King Henry 
Huauzontle 
Jute, leaves 
Lettuce, bitter 
 
Lettuce, head 
Lettuce, leaf 
Orach 
Parsley, fresh leaves 
Plantain, buckhorn 
Primrose, English 
Purslane, garden 
Purslane, winter 
Radicchio 
Spinach 
Spinach, Malabar 
Spinach, New Zealand 
Spinach, tanier 
Swiss Chard 
Violet, Chinese leaves 
 
Target Disease 
Rate 
(fl oz/A) Application Timing Use Directions 
Damping off 
(Pythium spp.) 
 
 
13.9-27.8** At-Planting Soil 
Application by any of the 
following methods: 
 In-furrow 
 Transplant water 
 Banded surface spray – 
Apply following 
transplanting or during 
seeding in a 6- to 12-inch 
band. 
 Drip irrigation – If using 
drip on direct-seeded 
crops, delay application 
until after emergence. 
 
See Section 4.1.1 for directions 
for at-planting applications in-
furrow, as a banded surface soil 
spray, or in transplant water. 
Follow applications with 
overhead sprinkler irrigation 
within 24 hours to move the 
product into the soil profile. 
 
See Section 4.5 for drip 
irrigation instructions. 
 
[For enhanced control of 
Pythium spp., add a mefenoxam-
containing product to the spray 
mixture. DO NOT exceed 1.0 lb

31 
 
ai soil applied mefenoxam per 
application or per year.] 
 
[If disease pressure is high, use 
the highest specified rate.] 
 
**13.9 fl oz is equivalent to 0.03 lb oxathiapiprolin; 0.10 lb mefenoxam 
**27.8 fl oz is equivalent to 0.06 lb oxathiapiprolin; 0.19 lb mefenoxam 
Resistance Management: 
 Refer to Section 3.1. 
 
Integrated Pest Management: 
 Refer to Section 3.2. 
USE RESTRICTIONS 
1) Refer to Section 6.1 for additional product use restrictions. 
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed in the table. 
3) Maximum Number of Applications: DO NOT make more than 2 applications at the maximum rate per 
year, 1 application per crop. 
4) Maximum Annual Rate: 27.8 fl oz/A/year (equivalent to 0.06 lb ai/A/year oxathiapiprolin and 0.19 lb 
ai/A/year mefenoxam) 
a) DO NOT apply more than 0.5 lb ai/A/year of oxathiapiprolin-containing products. 
b) DO NOT apply more than 1.0 lb ai/A/year of soil-applied mefenoxam- and metalaxyl-containing 
products. 
5) DO NOT use Orondis Gold DC in nursery production of transplants. 
6) DO NOT follow soil applications of Orondis Gold DC with foliar applications of Orondis Gold DC (or any 
other FRAC 49-containing product). Use either soil applications or foliar applications but not both for 
disease control. 
7) Pre-harvest Interval (PHI): 
a) 7 days (except spinach); 
b) Spinach 21 days or 3 days only if soil application does not exceed the equivalent of 1.0 lb 
ai/A/year and foliar application does not exceed 0.25 lb ai/A/year of mefenoxam- and 
metalaxyl-containing products

32 
 
7.7 Potato and Other Tuberous and Corm Vegetables, Crop Subgroup 
1C 
Crops (including all cultivars, varieties, and/or hybrids of these) 
Arracacha 
Arrowroot 
Artichoke, Chinese 
Artichoke, Jerusalem 
Canna, edible 
Cassava, bitter and sweet 
Chayote (root) 
Chufa 
Dasheen (taro) 
Leren 
Ginger 
Potato 
Sweet potato 
Tanier 
Turmeric 
Yam bean 
Yam, true 
Target Disease 
Rate 
(fl oz/A) Application Timing Use Directions 
Pink rot 
(Phytophthora 
erythroseptica) 
 
Pythium leak 
(Pythium spp.) 
 
Pythium seedling 
disease 
(Pythium spp.) 
 
 13.9-48.0** 
 
At-Planting Soil 
Application: Apply in-
furrow at planting. 
 
Apply as a 6- to 8-inch band directly 
over the seed pieces in the furrow 
and then close the furrows. Make 
application in 3-15 gal/A. Refer to 
Section 4.1.1 for additional 
instructions on in-furrow application. 
 
Use a higher rate in fields with a 
history of pink rot or Pythium leak. 
 
You may need to follow this in-furrow 
application of Orondis Gold DC with a 
foliar application of a different 
product, including a mefenoxam-
containing product (e.g., Ridomil 
Gold® Bravo® SC (EPA Reg. No. 
100-1221)). Refer to the label for 
specific use instructions at tuber 
initiation: 
 when conditions are conducive for 
disease development; 
 when the variety is susceptible or 
moderately susceptible to pink rot 
or Pythium leak; or 
 in areas with a long growing 
season. 
 
 
Late blight 
(Phytophthora 
infestans) 
 
Pink rot 
(Phytophthora 
erythroseptica) 
 
Pythium leak 
(Pythium spp.) 
 
7.0-12.0** Foliar Application: 
Provided that Orondis 
Gold DC was NOT used at 
planting, make up to two 
post-planting foliar 
applications. 
 
Make the first foliar 
application at tuber 
initiation (Growth Stage III) 
and prior to tubers being 
larger in size than the 
diameter of a nickel. Make 
a second application 14 
days later. Apply the 
labeled rate of a protectant 
Use a higher rate when 
environmental conditions favor 
disease development and in fields 
with a history of pink rot or Pythium 
leak. 
 
Apply by ground or chemigation. For 
ground application, apply at least 15 
gal/A. For information on 
chemigation, see Section 4.5.

33 
 
fungicide between the 
Orondis Gold DC 
applications. 
**7.0 fl oz is equivalent to 0.02 lb oxathiapiprolin; 0.05 lb mefenoxam 
**12.0 fl oz is equivalent to 0.03 lb oxathiapiprolin; 0.08 lb mefenoxam 
**13.9 fl oz is equivalent to 0.03 lb oxathiapiprolin; 0.10 lb mefenoxam 
**48.0 fl oz is equivalent to 0.11 lb oxathiapiprolin; 0.33 lb mefenoxam 
Resistance Management: 
 Refer to Section 3.1. 
 Make no more than 2 sequential applications before rotating to a fungicide with a different mode of 
action. 
 DO NOT follow soil applications of Orondis Gold DC (or any other FRAC 49-containing product) with 
foliar applications of another oxathiapiprolin-containing product (or any other FRAC 49-containing 
product). Use either soil applications or foliar applications but not both for disease control. 
 Where 3 or more applications are made, use Orondis Gold DC (or other FRAC 49-containing product) 
in no more than 33% of the applications, or a maximum of 4 applications, whichever is fewer. 
Integrated Pest Management: 
 Refer to Section 3.2. 
USE RESTRICTIONS 
1) Refer to Section 6.1 for additional product use restrictions. 
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed in the table. 
3) Maximum Number of Applications per Year: 
a) Soil Application: DO NOT make more than 1 application at the maximum rate per year. 
b) Foliar/Fruit Application: DO NOT make more than 4 applications at the maximum rate per year. 
4) Minimum Application Interval: 14 days 
5) Maximum Annual Rate: 48.0 fl oz/A/year (equivalent to 0.11 lb ai/A/year oxathiapiprolin and 0.33 lb 
ai/A/year mefenoxam) 
a) DO NOT apply more than 0.25 lb ai/A/year of soil-applied or 0.12 lb ai/A/year of foliar-applied 
oxathiapiprolin-containing products. 
b) DO NOT apply more than 0.34 lb ai/A/year of soil-applied and 0.4 lb ai/A/year of foliar-applied 
mefenoxam- and metalaxyl-containing products. 
6) Pre-harvest Interval (PHI): 14 days 
 
 
 
7.8 Specific Tropical and Subtropical Fruits 
Crops (including all cultivars, varieties, and/or hybrids of these) 
Avocado 
Black Sapote 
Canistel 
Mango 
Papaya 
Star Apple 
Target Disease 
Rate 
(fl oz/A) Application Timing Use Directions 
Phytophthora root 
and crown rot 
(Phytophthora spp.) 
 
 
20.0 – 
55.0** 
Resets or New Plantings: 
Make the first soil application 
at planting and up to one 
additional application 3 
months later, coinciding with a 
root growth flush. 
 
Established Plantings: 
Make up to two soil 
applications on a 3-month 
Apply as a drench or soil spray 
under the canopy around the base 
of the tree to the zone of maximum 
root density, or through irrigation 
water (micro-sprinkler, drip, or 
flood). 
 
For effective disease control, ensure 
that the product solution thoroughly 
wets the target root zone. If the

34 
 
interval, coinciding with root 
growth flush. 
 
application method does not move 
the product to the root zone, and 
rain is not imminent, then follow with 
irrigation. 
**20.0 fl oz is equivalent to 0.05 lb oxathiapiprolin; 0.14 lb mefenoxam 
**55.0 fl oz is equivalent to 0.12 lb oxathiapiprolin; 0.38 lb mefenoxam 
Resistance Management: 
 Refer to Section 3.1. 
 DO NOT follow soil applications of Orondis Gold DC (or any other FRAC 49-containing product) with 
foliar applications of another oxathiapiprolin-containing product (or any other FRAC 49-containing 
product). Use either soil applications or foliar applications but not both for disease control. 
Integrated Pest Management: 
 Refer to Section 3.2. 
USE RESTRICTIONS 
1) Refer to Section 6.1 for additional product use restrictions. 
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed in the table. 
3) Maximum Number of Applications Per Year: DO NOT make more than 2 applications at the 
maximum rate per year. 
4) Minimum Application Interval: 90 days 
5) Maximum Annual Rate: 110.0 fl oz/A/year (equivalent to 0.25 lb ai/A/year of soil-applied 
oxathiapiprolin and 0.76 lb ai/A/year mefenoxam) 
a) DO NOT apply more than 0.25 lb ai/A/year of soil-applied oxathiapiprolin-containing products. 
b) DO NOT apply more than 6.0 lb ai/A/year of mefenoxam- and metalaxyl-containing products for 
avocado, or 3.0 lb ai/A/year of mefenoxam for other crops listed. 
6) DO NOT use in nursery production of transplanted crops. 
7) Pre-harvest Interval (PHI): 30 days

35 
 
7.9 Stalk and Stem Vegetables, Crop Subgroup 22A (except Celtuce, 
Fennel, and Kohlrabi) 
Crops (including all cultivars, varieties, and/or hybrids of these) 
 
Agave[*] 
Aloe vera[*] 
Asparagus[*] 
Bamboo shoots[*] 
Fern, edible, fiddlehead[*] 
Kale, sea[*] 
 
Palm hearts[*] 
Prickly pear, pads[*] 
Prickly pear, Texas, pads[*] 
 
Target Disease 
Rate 
(fl oz/A) Application Timing Use Directions 
Phytophthora 
root rot 
(Phytophthora 
spp.) 
13.7-73.0** 
 
 
New Plantings: Use as a 
crown soak prior to planting. 
[(*Not for use in California)] 
 
Use 10 gallons of solution, or the 
volume required to fully 
submerge 100 crowns. 
 
To determine the amount of 
product needed to treat 100 
crowns, first determine the 
number of plants per acre using 
typical plant spacing. 
 
Then use the following formula: 
(100 ÷ number plants per acre) 
x use rate = product needed to 
treat 100 crowns in 10 gallons 
of solution. 
 
Make a crown soak solution in a 
large enough container to ensure 
that the crowns are fully 
submerged. 
 
Place the crowns in this fungicide 
solution and soak for a minimum 
of 10 minutes. 
 
 
Established Plantings: Make 
the first application to 
established asparagus beds at 
least 14 days prior to harvest 
(first cutting). 
 
Make a second application on 
the day before the first cutting. 
Apply as a soil-directed banded 
spray in a minimum of 20 gal/A of 
water. 
 
The application is to be made at 
the per acre rate concentrated in 
a band. 
 
Apply ¼ - ½ inch of water after 
application, either by overhead 
sprinkler irrigation or garden hose 
drench on the row.

36 
 
Orondis Gold DC may be applied 
by drip irrigation using the 
following directions: 
 Apply 1/2 acre-inch of water 
alone. 
 Then apply the first 1/4 - 1/3 
of the irrigation water with 
Orondis Gold DC. 
 Finally, apply the final 2/3 – 
3/4 of the irrigation water 
without Orondis Gold DC. 
 
Refer to Section 4.5 for 
additional drip irrigation 
instructions. 
**13.7 fl oz is equivalent to 0.03 lb oxathiapiprolin; 0.09 lb mefenoxam 
**73.0 fl oz is equivalent to 0.17 lb oxathiapiprolin; 0.5 lb mefenoxam 
Resistance Management: 
 Refer to Section 3.1. 
Integrated Pest Management: 
 Refer to Section 3.2. 
USE RESTRICTIONS 
1) Refer to Section 6.1 for additional product use restrictions. 
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed in the table. 
3) Maximum Number of Applications: DO NOT make more than 2 Orondis Gold DC applications per 
year. 
4) Minimum Application Interval: 14 days 
5) Maximum Annual Rate: 146.0 fl oz/A/year (equivalent to 0.33 lb ai/A/year oxathiapiprolin and 1.0 lb 
ai/A/year mefenoxam) 
a) DO NOT apply more than 0.5 lb ai/A/year of oxathiapiprolin-containing products. 
b) DO NOT apply more than 1.0 lb ai/A/year of soil-applied mefenoxam- and metalaxyl- containing 
products. 
6) Pre-harvest Interval (PHI): 1 day 
 
7.10 Tobacco 
Crops (including all cultivars, varieties, and/or hybrids of these) 
Tobacco 
Target Disease 
Rate 
(fl oz/A) Application Timing Use Directions 
Black shank 
(Phytophthora 
parasitica var. 
nicotianae) 
 
Pythium seedling 
disease 
(Pythium spp.) 
 
 13.9-27.8** 
 
At-Planting Soil 
Application: 
 In-furrow 
 Pre-Plant 
Incorporated 
 Transplant water 
 
For control of black shank, apply in transplant 
water while planting tobacco seedlings. Apply 
in at least 200 gallons of transplant water per 
acre. 
 
Apply as a broadcast application to the soil 
and incorporate into the top 2-4 inches of soil 
prior to planting. 
 
Use a higher rate if the disease epidemic is 
expected to be severe. Follow with an 
additional application of a fungicide outside of 
FRAC 49 (e.g., Ridomil Gold SL (EPA Reg.

37 
 
No. 100-1202)) at first cultivation and/or layby 
if necessary. 
 
For effective disease control, apply in a 
sufficient volume to move the product to the 
root zone. 
Black shank 
(Phytophthora 
parasitica var. 
nicotianae) 
 
Blue mold 
(Peronospora 
tabacina) 
 
7.0-36.0** Post-Planting Soil-
Directed or Banded 
Application: 
Provided that 
Orondis Gold DC 
was NOT used at 
planting, make one 
application at first 
cultivation or at layby. 
Use a higher rate in fields with a history of 
disease, on heavier soils, and on susceptible 
varieties. 
 
Position the nozzles so the spray is directed to 
the soil under the lower leaves and covered 
with soil by the cultivator. 
 
For ground application, apply in at least 20 
gallons per acre. 
 
**7.0 fl oz is equivalent to 0.02 lb oxathiapiprolin; 0.05 lb mefenoxam 
**13.9 fl oz is equivalent to 0.03 lb oxathiapiprolin; 0.10 lb mefenoxam 
**27.8 fl oz is equivalent to 0.06 lb oxathiapiprolin; 0.19 lb mefenoxam 
**36.0 fl oz is equivalent to 0.08 lb oxathiapiprolin; 0.25 lb mefenoxam 
Resistance Management: 
 Refer to Section 3.1. 
Integrated Pest Management: 
 Refer to Section 3.2. 
Precautions: 
 There is a risk of plant injury with transplant water application, especially when applied in less than 200 
gallons of carrier volume per acre. 
 Crop injury is more likely when applied in less t han 100 gallons/acre. Injury is temporary and typically 
disappears within three weeks. 
 Pre-mixing Orondis Gold DC in a tank separate from the transplant water source tank will help to 
prevent negative interactions with fertilizers or other pesticides in the transplant water solution. 
 Avoid application to stressed seedlings or during hot and dry conditions due to injury potential. 
USE RESTRICTIONS 
1) Refer to Section 6.1 for additional product use restrictions. 
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed in the table. 
3) Maximum Number of Applications per Year: DO NOT make more than 1 application at the maximum 
rate per year. 
4) Maximum Annual Rate: 36.0 fl oz/A/year (equivalent to 0.08 lb ai/A/year oxathiapiprolin and 0.25 lb 
ai/A/year mefenoxam) 
a) DO NOT apply more than 0.5 lb ai/A/year of soil-applied or 0.12 lb ai/A/year of foliar-applied 
oxathiapiprolin-containing products. 
b) DO NOT apply more than 1.5 lb ai/A/year of mefenoxam- and metalaxyl-containing products. 
5) DO NOT use Orondis Gold DC for black shank control in PA. 
6) DO NOT follow soil applications of Orondis Gold DC with foliar applications of Orondis Gold DC (or any 
other FRAC 49-containing product).

38 
 
7.11 Tree Nuts, Crop Group 14-12 
Crops (including all cultivars, varieties, and/or hybrids of these) 
African nut-tree[*] 
Almond[*] 
Beechnut[*] 
Brazil nut[*] 
Brazilian Pine[*] 
Bunya[*] 
Bur Oak[*] 
Butternut[*] 
Cajou nut[*] 
Candlenut[*] 
Cashew[*] 
Chestnut[*] 
Chinquapin[*] 
Coconut[*] 
Coquito nut[*] 
Dika nut[*] 
Ginkgo[*] 
Guiana Chestnut[*] 
Hazelnut (Filbert)[*] 
Heartnut[*] 
Hickory nut[*] 
Japanese horse-chestnut[*] 
Macadamia Nut[*] 
Mongongo nut[*] 
Monkey-pot[*] 
Monkey puzzle nut[*] 
Okari nut[*] 
Pachira nut[*] 
Peach palm nut[*] 
Pecan[*] 
Pequi[*] 
Pili Nut [*] 
Pine nut[*] 
Pistachio[*] 
Sapucaia nut[*] 
Tropical almond[*] 
Walnut, black[*] 
Walnut, English[*] 
Yellowhorn[*] 
Target Disease 
Rate 
(fl oz/A) Application Timing Use Directions 
Phytophthora root and 
crown rot 
(Phytophthora spp.) 
 
 
20.0 – 
55.0** 
Resets or New Plantings: 
Make the first soil 
application at planting and 
up to one additional 
application 2-6 months later, 
coinciding with a root growth 
flush. 
 
Established Plantings: 
Make up to two soil 
applications at a 2- to 6-
month interval, coinciding 
with root growth flush. 
 
[(*Not for use in California)] 
 
Apply as a drench or soil spray 
under the canopy around the 
base of the tree to the zone of 
maximum root density, or through 
irrigation water (micro-sprinkler, 
drip, or flood). 
 
For effective disease control, 
ensure that the product solution 
thoroughly wets the target root 
zone. If the application method 
does not move the product to the 
root zone, and rain is not 
imminent, then follow with 
irrigation. 
**20.0 fl oz is equivalent to 0.05 lb oxathiapiprolin; 0.14 lb mefenoxam 
**55.0 fl oz is equivalent to 0.12 lb oxathiapiprolin; 0.38 lb mefenoxam 
Resistance Management: 
 Refer to Section 3.1. 
Integrated Pest Management: 
 Refer to Section 3.2. 
USE RESTRICTIONS 
1) Refer to Section 6.1 for additional product use restrictions. 
2) Maximum Single Application Rate: DO NOT exceed the maximum rate listed in the table. 
3) Maximum Number of Applications per Year: DO NOT make more than 2 applications at the 
maximum rate per year. 
4) Minimum Application Interval: 30 days 
5) Maximum Annual Rate: 110.0 fl oz/A/year (equivalent to 0.25 lb ai/A/year oxathiapiprolin and 0.76 lb 
ai/A/year mefenoxam) 
a) DO NOT apply more than 0.25 lb ai/A/year of oxathiapiprolin-containing products. 
b) DO NOT apply more than 6.0 lb ai/A/year of mefenoxam- and metalaxyl-containing products. 
6) DO NOT use in nursery production of transplanted crops. 
7) Pre-harvest Interval (PHI): 30 days

39 
 
8.0 STORAGE AND DISPOSAL 
STORAGE AND DISPOSAL 
DO NOT contaminate water, food, or feed by storage or disposal. 
 
Pesticide Storage 
Keep container closed when not in use. Always store pesticides in the original container only, 
away from other pesticides, food, pet food, feed, seed, fertilizers, and veterinary supplies. If a 
leaky container must be contained within another, mark the outer container to identify the 
contents. Storage areas must be locked and secure from vandalism, with precautionary signs 
posted. The storage area must be dry, well-lit, and well-ventilated. Keep pesticide storage 
areas clean. Clean up any spills promptly. Protect pesticide containers from extreme heat 
and cold. Store herbicides, insecticides, and fungicides in separate areas within the storage 
unit. Place liquid formulations on lower shelves and dry formulations above. Maintaining a 
spill kit and fire extinguisher on hand and having emergency phone numbers posted will allow 
you to be prepared for emergencies. If spill cleanup PPE is stored nearby, but outside the 
pesticide storage area, it must be accessible when needed. 
 
Pesticide Disposal 
Wastes resulting from the use of this product must be disposed of on site or at an approved 
waste disposal facility. 
 
Container Handling [(less than or equal to 5 gallons)] 
Non-refillable container. DO NOT reuse or refill this container. Triple rinse container (or 
equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents 
into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. 
Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into 
application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 
seconds after the flow begins to drip. Repeat this procedure two more times. Then offer for 
recycling if available or puncture and dispose of in a sanitary landfill, or by incineration, or by 
other procedures approved by state and local authorities. 
 
Container Handling [(greater than 5 gallons)] 
Non-refillable container. DO NOT reuse or refill this container. Triple rinse container (or 
equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents 
into application equipment or a mix tank. Fill the container 1/4 full with water. Replace and 
tighten closures. Tip container on its side and roll it back and forth, ensuring at least one 
complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth 
several times. Turn the container over onto its other end and tip it back and forth several 
times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use 
or disposal. Repeat this procedure two more times. Then offer for recycling if available or 
puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures 
approved by state and local authorities. 
 
Container Handling [(greater than 5 gallons)] 
Refillable container. Refill this container with pesticide only. DO NOT reuse this container 
for any other purpose. Cleaning the container before final disposal is the responsibility of the 
person disposing of the container. Cleaning before refilling is the responsibility of the person

40 
 
refilling. To clean the container before final disposal, empty the remaining contents from this 
container into application equipment or mix tank. Fill the container about 10 percent full with 
water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump 
rinsate into application equipment or rinsate collection system. Repeat this pressure rinsing 
procedure two more times. Then offer for recycling if available or puncture and dispose of in 
a sanitary landfill, or by incineration, or by other procedures approved by state and local 
authorities. 
 
CONTAINER IS NOT SAFE FOR FOOD, FEED, OR DRINKING WATER. 
 
9.0 CONDITIONS OF SALE AND LIMITATION OF WARRANTY 
AND LIABILITY 
NOTICE: Read the entire Directions for Use and Conditions of Sale and Limitation of 
Warranty and Liability before buying or using this product. If the terms are not 
acceptable, return the product at once, unopened, and the purchase price will be 
refunded. 
The Directions for Use of this product must be followed carefully. It is impossible to eliminate 
all risks inherently associated with the use of this product. Crop injury, ineffectiveness or 
other unintended consequences may result because of such factors as manner of use or 
application, weather or crop conditions, presence of other materials or other influencing 
factors in the use of the product, which are beyond the control of SYNGENTA CROP 
PROTECTION, LLC or Seller. To the extent permitted by applicable law, Buyer and User 
agree to hold SYNGENTA and Seller harmless for any claims relating to such factors. 
 
SYNGENTA warrants that this product conforms to the chemical description on the label and 
is reasonably fit for the purposes stated in the Directions for Use, subject to the inherent risks 
referred to above, when used in accordance with directions under normal use conditions. To 
the extent permitted by applicable law: (1) this warranty does not extend to the use of the 
product contrary to label instructions or under conditions not reasonably foreseeable to or 
beyond the control of Seller or SYNGENTA, and (2) Buyer and User assume the risk of any 
such use. TO THE EXTENT PERMITTED BY APPLICABLE LAW, SYNGENTA MAKES NO 
WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE 
NOR ANY OTHER EXPRESS OR IMPLIED WARRANTY EXCEPT AS WARRANTED BY 
THIS LABEL. 
 
To the extent permitted by applicable law, in no event shall SYNGENTA be liable for any 
incidental, consequential or special damages resulting from the use or handling of this 
product. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THE EXCLUSIVE 
REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY OF SYNGENTA 
AND SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES 
(INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, CONTRACT, 
NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) RESULTING FROM THE 
USE OR HANDLING OF THIS PRODUCT, SHALL BE THE RETURN OF THE PURCHASE 
PRICE OF THE PRODUCT OR, AT THE ELECTION OF SYNGENTA OR SELLER, THE 
REPLACEMENT OF THE PRODUCT.

41 
 
SYNGENTA and Seller offer this product, and Buyer and User accept it, subject to the 
foregoing Conditions of Sale and Limitation of Warranty and Liability, which may not be 
modified except by written agreement signed by a duly authorized representative of 
SYNGENTA. 
 
10.0 APPENDIX [Optional Text] 
[Start of Optional Text] 
10.1 Orondis Gold DC Rate Conversion Chart 
fl oz product/A lb ai/A 
mefenoxam 
lb ai/A 
oxathiapiprolin 
Acres treated 
per gallon 
7.0 0.05 0.02 18.3 
12.0 0.08 0.03 10.7 
13.7 0.09 0.03 9.3 
13.9 0.10 0.03 9.2 
20.0 0.14 0.05 6.4 
27.8 0.19 0.06 4.6 
28.0 0.19 0.06 4.6 
36.0 0.25 0.08 3.6 
48.0 0.33 0.11 2.7 
55.0 0.38 0.12 2.3 
62.0 0.43 0.14 2.1 
73.0 0.50 0.17 1.8 
110.0 0.76 0.25 1.2 
124.0 0.85 0.28 1.0 
146.0 1.00 0.33 0.9 
220.0 1.51 0.50 0.6 
 
10.2 Orondis Gold DC Use Summary Table 
IMPORTANT: The table below is a summary of the Crop Use Directions for 
Orondis Gold DC. However, it is important for the user to read and follow 
the complete instructions contained within this label.

42 
 
Crop or Crop 
Group/Subgroup 
with examples 
Maximum Single Application 
Rate 
(lb ai/A) 
Maximum Annual Rate (lb 
ai/A/year) 
Minimum 
Application 
Interval 
(days) 
Pre-
harvest 
Interval 
(PHI, days) Mefenoxam Oxathiapiprolin Mefenoxam Oxathiapiprolin 
Bushberry, Crop 
Subgroup 13-
07B[*], except 
lowbush 
blueberry 
Blueberry, 
highbush 
0.38 soil 0.12 soil 3.6 soil 0.50 soil 30 1 
Caneberry, Crop 
Subgroup 13-
07A[*] 
Blackberry 
Raspberry 
0.76 soil 0.25 soil 1.8 soil 0.50 7 45 
Strawberry 0.43 soil 
0.10 foliar 
0.14 soil 
0.03 foliar 
1.5 soil 
0.19 foliar 
0.29 soil 
0.06 foliar 30 14 soil 
0 foliar 
Cucurbit 
Vegetables, Crop 
Group 9: 
cucumber, 
pumpkin 
0.38 soil 
0.08 foliar 
 
0.12 soil 
0.03 foliar 
1.0 soil 
0.5 foliar 
0.50 soil 
0.12 foliar 20 5 
Fruiting 
Vegetables, Crop 
Group 8-10: 
eggplant, peppers 
0.38 soil 
0.08 foliar 
 
0.12 soil 
0.03 foliar 
1.5 soil 
0.5 foliar 
0.50 soil 
0.12 foliar 
30 for all 
fruiting veg 
except 
tomato, 28 
for tomato 
7 
Ginseng 0.33 soil 0.11 soil 0.38 0.50 NA 14 
Hops[*] 0.25 soil 
0.08 foliar 
0.08 soil 
0.03 foliar 
0.25 soil 
0.5 foliar 
0.25 soil 
0.09 foliar 7 45 
Leafy Greens, 
Crop Subgroup 
4-16A: 
Lettuce 
Spinach 
0.19 soil 
 
0.06 soil 
 
1.0 soil 
 
0.50 
 NA 
7 (except 
spinach), 
Spinach 21 
or 3 (see 
Section 
7.6) 
Potato and Other 
Tuberous and 
Corm 
Vegetables, Crop 
Subgroup 1C 
Potato 
0.33 soil 
0.08 foliar 
0.11 soil 
0.03 foliar 
0.34 soil 
0.4 foliar 
0.25 soil 
0.12 foliar 14 14 
Specific Tropical 
and Subtropical 
Fruits: Avocados, 
Black Sapote, 
Canistel, Mango, 
Papaya, and Star 
Apple only 
0.38 soil 0.12 soil 
3.0 for all 
tropical fruits 
except 
avocado, 
6.0 for 
avocado 
 
0.25 soil 90 30

43 
 
Stalk and Stem 
Vegetables, Crop 
Subgroup 22A[*] 
(except Celtuce, 
Fennel, and 
Kohlrabi) 
0.5 soil 0.17 soil 1.0 soil 0.5 14 1 
Tobacco 0.25 soil 0.08 soil 1.5 0.50 soil 
0.12 foliar 
NA NA 
Tree Nuts Crop 
Group 14-12[*] 
Almond 
Pecan 
0.38 soil 0.12 soil 6.0 0.25 30 30

44 
 
*Not for Use in California 
 
[End of Optional Text] 
 
Orondis®, Ridomil Gold®, the ALLIANCE FRAME 
the SYNGENTA Logo and the PURPOSE ICON 
are Trademarks of a Syngenta Group Company 
 
Bravo® is a trademark of Makhteshim Agan of North America, Inc., d/b/a ADAMA 
 
Viton™ is a trademark of The Chemours Company FC, LLC 
 
 
©20XX Syngenta 
For non-emergency (e.g., current product information), call 
Syngenta Crop Protection at 1-866-796-4368. 
 
Manufactured for: 
Syngenta Crop Protection, LLC 
P.O. Box 18300 
Greensboro, North Carolina 27419-8300 
 
Orondis Gold DC XXXX NEW-C 1022-CL -- JVB -- 11/16/2023 
000100-0XXXX.20221031C.ORONDIS_GOLD_DC.NEW-1022-CL.pdf