crop-chem-docs/corpus/epa_ppls/228-527.md

# NUPRID 4.6F INSECTICIDE

- EPA Reg No: **228-527**
- Registrant: NUFARM AMERICAS, INC.
- Signal word: Caution
- Active ingredients: Imidacloprid (45.2%)
- Label accepted: 2014-06-26
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000228-00527-20140626.pdf

---
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY 
 WASHINGTON, D.C. 20460 
 
 
 
 OFFICE OF CHEMICAL SAFETY 
 AND POLLUTION PREVENTION 
 
 
June 26, 2014 
 
Carrie Tackema 
Nufarm Americas, Inc. 
11901 S. Austin Avenue 
Alsip, IL 60803 
 
Subject: Amended label clarifying containerized citrus use rates 
Product Name: Nuprid 4.6F Insecticide 
EPA Reg. No. 228-527 
Submission dated May 27, 2014 
Decision Number 492490 
 
Dear Ms. Tackema: 
 
The labeling referred to above, submitted in connection with registration under the Federal 
Insecticide, Fungicide, and Rodenticide Act, as amended, is acceptable. A stamped copy is 
enclosed for your records. Please submit one copy of your final printed labeling before you 
release the product for shipment. If you have any questions regarding this label, please contact 
Dr. Jennifer Urbanski at 703-347-0156 or urbanski.jennifer@epa.gov. 
 
 
Sincerely, 
 
Venus Eagle, PM 01 
Insecticide-Rodenticide Branch 
Registration Division 
Date: June 26, 2014 
 
 
Enclosure- Stamped Label

000228-00527.20140527.draft
GROUP 4A INSECTICIDE
NUPRID® 4.6F
INSECTICIDE
FOR USES IN PEST MANAGEMENT AND CONTROL OR SUPPRESSION OF INSECTS
THAT MAY VECTOR DISEASES AND MAINTENANCE OF PLANT HEALTH
ACTIVE INGREDIENT:
Imidacloprid, 1 [(6-Chloro-3-pyridinyl)methyl]-N-nitro-2-imidazolidinimine..............45.2%
OTHER INGREDIENTS: ........................................................................................... 54.8%
TOTAL: ............................ 100.0%
Contains 4.6 pounds of imidacloprid per gallon
KEEP OUT OF REACH OF CHILDREN
CAUTION – PRECAUCION
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle.
(If you do not understand the label, find someone to explain it to you in detail.)
SEE INSIDE BOOKLET FOR FIRST AID AND ADDITIONAL PRECAUTIONARY STATEMENTS
For Chemical Spill, Leak, Fire, or Exposure, Call CHEMTREC (800) 424-9300
For Medical Emergencies Only, Call (877) 325-1840
EPA REG. NO. 228-527
EPA EST. NO.
Manufactured For
Nufarm Americas Inc.
11901 South Austin Avenue
Alsip, IL 60803
SHAKE WELL BEFORE USING
NET CONTENTS ____________GALS. ( ______ Liters)
[Nufarm: Grow a better tomorrow]
[Grow a better tomorrow]

Page 2
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION - PRECAUCION
Harmful if inhaled. Harmful if swallowed. Causes moderate eye irritation. Avoid breathing spray mist. Remove and wash
contaminated clothing before reuse. Wash thoroughly with soap and water after handling and before eating, drinking,
chewing gum or using tobacco. Avoid contact with eyes or clothing. Wear protective eye wear. Wear long sleeved shirt
and long pants, socks, shoes, and chemical resistant gloves made of waterproof material such as barrier laminate, butyl
rubber, nitrile rubber, neoprene rubber, natural rubber, polyethylene, polyvinylchloride (PVC) or viton.
FIRST AID
IF INHALED
 Move the person to fresh air.
 If person is not breathing, call 911 or an ambulance, then give artificial respiration,
preferably mouth-to- mouth if possible.
 Call a poison control center or doctor for further treatment advice.
IF SWALLOWED
 Call a poison control center or doctor immediately for treatment advice.
 Have person sip a glass of water if able to swallow.
 DO NOT induce vomiting unless told to do so by the poison control center or doctor.
 DO NOT give anything by mouth to an unconscious person.
IF IN EYES
 Hold eye open and rinse slowly and gently with water for 15 to 20 minutes.
 Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye.
 Call a poison control center or doctor for treatment advice.
IF ON SKIN OR
CLOTHING
 Take off contaminated clothing.
 Rinse skin immediately with plenty of water for 15 to 20 minutes.
 Call a poison control center or doctor for treatment advice.
HOT LINE NUMBER
Have the product container or label with you when calling a poison control center or doctor, or going for treatment. You
may also contact 1-877-325-1840 for emergency medical treatment information.
NOTE TO PHYSICIAN
No specific antidote is available. Treat the patient symptomatically.
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Applicators and Other Handlers Must Wear:
 Long-sleeved shirt and long pants.
 Chemical-resistant gloves made of any waterproof material such as, barrier laminate, butyl rubber, nitrile rubber,
neoprene rubber, natural rubber, polyethylene, polyvinylchloride (PVC) or viton.
 Shoes plus socks.
Follow manufacturer's instructions for cleaning/ maintaining personal protective equipment, PPE. If no such instructions for
washables, use detergent and hot water. Keep and wash PPE separately from other laundry.
ENGINEERING CONTROLS STATEMENTS
When handlers use closed systems or enclosed cabs in a manner that meets the requirements listed in the Worker
Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d) (4-6)], the handler PPE requirements may be
reduced or modified as specified in the WPS.
USER SAFETY RECOMMENDATIONS
Users Should:
 Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet.
 Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
 Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as
possible, wash thoroughly and change into clean clothing.
ENVIRONMENTAL HAZARDS
DO NOT apply directly to water, areas where surface water is present or to intertidal areas below the mean high water
mark. DO NOT contaminate water when disposing of equipment washwaters.

Page 3
This product is highly toxic to bees exposed to direct treatment or residues on blooming crops/plants or weeds. DO NOT
apply this product or allow it to drift to blooming crops/plants or weeds if bees are foraging the treatment area. This
product is toxic to wildlife and highly toxic to aquatic invertebrates.
This chemical demonstrates the properties and characteristics associated with chemicals detected in groundwater. The
use of this chemical in areas where soils are permeable, particularly where the water table is shallow, may result in
groundwater contamination.
OBSERVE THE FOLLOWING PRECAUTIONS WHEN MIXING AND APPLYING IN THE VICINITY
OF AQUATIC AREAS SUCH AS LAKES; RESERVOIRS; RIVERS; PERMANENT STREAMS,
MARSHES OR NATURAL PONDS; ESTUARIES AND COMMERCIAL FISH FARM PONDS.
SPRAY DRIFT MANAGEMENT
The responsibility of avoiding spray drift is with the applicator. The applicator is responsible for considering weather-
related factors and the interaction of application equipment when making application decisions.
Importance of Droplet Size
The droplet size is an important factor and can influence drift. Small droplets (<150 – 200 microns) drift to a greater
extent than large droplets. Applications typically should be made to deliver the largest droplet range that provides
adequate control and coverage. Formation of very small droplets may be minimized by appropriate nozzle selection.
Wind Speed Restrictions
Drift potential increases at wind speeds of less than 3 mph (due to inversion potential) or more than 10 mph. However,
many factors, including droplet size, canopy and equipment specifications determine drift potential at any given wind
speed. DO NOT apply when winds are greater than 15 mph and avoid gusty and windless conditions.
Restrictions During Temperature Inversions
DO NOT make ground applications during temperature inversions. Drift potential is high during temperature inversions.
Temperature inversions typically restrict vertical air mixing, which then could cause small suspended droplets to remain
close to the ground and move laterally in a concentrated cloud. Temperature inversions typically are characterized by
increasing temperature with altitude and are common on nights with limited cloud cover and light to no wind. They begin
to form as the sun sets and often continue into the morning. Their presence can be indicated by ground fog; however if
fog is not present, inversions can also be identified by the movement of smoke from a ground source. Smoke that layers
and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves
upward and rapidly dissipates indicates good vertical mixing.
Mixing and Loading Requirements
To avoid potential contamination of groundwater, use a properly designed and maintained containment pad for mixing
and loading of any pesticide into application equipment. If containment pad is not used, maintain a minimum distance of
25 feet between mixing and loading area and potential surface to groundwater conduits such as field sumps, uncased
well heads, sink-holes, or field drains.
No-Spray Zone Requirements for Soil Applications
DO NOT apply within 25 feet of lakes; reservoirs; rivers; permanent streams, marshes or natural ponds; estuaries and
commercial fish farm ponds.
Runoff Management
DO NOT cultivate within 10 feet of the aquatic areas to allow growth of a vegetative filter strip. When using this product on
erodible soils, employ Best Management Practices for minimizing runoff.
Endangered Species Notice
Under the Endangered Species Act, it is a Federal Offense to use any pesticide in a manner that results in the death of a
member of an endangered species. Consult your local county bulletin, County Extension Agent, or Pesticide State Lead
Agency for information concerning endangered species in your area.
Resistance Management
Some insects are known to develop resistance to insecticides after repeated use. As with any insecticide, the use of this
product should conform to resistance management strategies established for the use area.
This product contains a Group 4A insecticide. Insect biotypes with acquired or inherent resistance to Group 4A may
eventually dominate the insect population if Group 4A insecticides are used repeatedly as the predominant method of
control for targeted species.
The active ingredient in this product belongs to the neonicotinoid chemical class. Insect pests resistant to other chemical
classes have not shown cross-resistance to this product. To maintain susceptibility to this class of chemistry in insect
species with high resistance development potential, it is recommended that for each crop season: 1) only a single, soil

Page 4
application of this product be made; 2) foliar applications of products from this same class not be made following a long
residual, soil application of this product, or other neonicotinoid products.
Contact your local extension specialist, certified crop advisor and/or product manufacturer for additional insect
resistance management recommendations. Also, for more information on Insect Resistance Management (IRM), visit the
Insecticide Resistance Action Committee (IRAC) on the web at http://www.irac-online.org/.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in any manner inconsistent with its labeling.
DO NOT apply this product in a way that will contact workers or other persons, either directly or through drift. Only
protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the
agency responsible for pesticide regulation.
Note to Reviewer: the two statements in brackets below may be used as they relate to Tilia species:
[DO NOT apply this product, by any application method, to linden, basswood or other Tilia species in the State of
Oregon.]
[DO NOT apply this product, by any application method, to linden, basswood or other Tilia species.]
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170. This
Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses,
and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and
emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label
about personal protective equipment (PPE) and restricted-entry interval. The requirements in this box only apply to
uses of this product that are covered by the Worker Protection Standard.
DO NOT enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours.
Exception: If the product is soil-injected or soil-incorporated, the Worker Protection Standard, under certain
circumstances, allows workers to enter the treated area if there will be no contact with anything that has been treated.
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves
contact with anything that has been treated, such as plants, soil, or water, is:
 Coveralls
 Chemical-resistant gloves made of any waterproof material such as, barrier laminate, butyl rubber, nitrile rubber,
neoprene rubber, natural rubber, polyethylene, polyvinylchloride (PVC) or viton
 Shoes plus socks
APPLICATION INSTRUCTIONS
Apply this product to deliver the active ingredient into the seed or root-zone of crop. Failure to place this product into
root-zone may result in loss of control or delay in onset of activity. This product may be applied with ground or
chemigation application. DO NOT apply with aerial application equipment. Do not apply by foliar application.
Optimum activity results from applications to the root-zone of plants to be protected. The earlier this product is
available to a developing plant, the earlier the protection begins. This product is continuously taken into the roots over a
long period of time and the systemic nature of this product allows movement from roots through the xylem tissue to all
vegetative parts of the plant. This results in extended residual activity, the control of insects and the prevention and/or
reduction of virus transmission or symptom expression, and plant health benefits. The rate applied affects the length of
the plant protection period. The higher specified rates are intended for when infestations occur later in crop development,
or where pest pressure is continuous. This product will generally not control insects infesting flowers, blooms or fruit.
Additional crop protection may be required for insects feeding in or on these plant parts and for insects not listed in the
crop-specific, pests controlled sections of this label. Suppression, or less than adequate control of certain diseases and
insect pests including reduced feeding, may also result from applications of this product. Adequate control of these
pests/diseases may require supplemental control measures.
Use of this product on crops grown for production of true seed intended for private or commercial planting is not
permitted unless allowed under State specific 24(c) labeling. Additional information on this product and other questions
may be obtained from the Cooperative Extension Service, PCAs, or local Nufarm representatives.
Pre-mix with water or other appropriate diluent prior to application. Keep this product and water suspension agitated to
avoid settling.
DO NOT apply more than 0.5 lbs active ingredient per acre, per year, regardless of formulation or method of application,
unless specified within a crop-specific, Application Instructions section for a given crop.

Page 5
Mixing Instructions
To prepare the application mixture, add a portion of the required amount of water to the tank and then with agitation add this
product. Complete filling tank with balance of water needed. Maintain sufficient agitation during both mixing and
application. This product may also be used with other pesticides and/or fertilizer solutions. Please see Compatibility
Note below. When tank mixtures of this product and other pesticides are involved, prepare the tank mixture as specified
above and follow suggested Mixing Order below.
Mixing Order
When pesticide mixtures are needed, add wettable powders first, then this product and other flowable (suspension
concentrate) products second, and emulsifiable concentrates last. Ensure good agitation as each component is added.DO
NOT add an additional component until the previous is thoroughly mixed. If a fertilizer solution is added, a
fertilizer/pesticide compatibility agent may be needed. Maintain constant agitation during both mixing and application to
ensure uniformity of spray mixture.
Compatibility Note
Test compatibility of the intended mixture before adding this product to the spray or mix tank. Add proportionate amounts
of each ingredient in the appropriate order, to a pint or quart jar, cap, shake for 5 minutes, and let set for 5 minutes. Poor
mixing or formation of precipitates that do not readily redisperse indicates an incompatible mixture that should not be used.
For further information, contact your local Nufarm representative.
CHEMIGATION - DIRECTIONS FOR USE
Refer to DIRECTIONS FOR USE section before proceeding with chemigation application.
Types of Irrigation Systems
Chemigation applications of this product may only be made to crops through chemigation systems as specified in crop-specific
application sections and only through low-pressure systems unless specifically recommended for a given crop.DO NOTapply this
product through any other type of irrigation system.
Uniform Water Distribution and System Calibration
The irrigation system must provide uniform distribution of treated water. Crop injury, lack of effectiveness, or illegal pesticide
residues in the crop can result from non-uniform distribution of treated water. The system must be calibrated to uniformly apply the
rates specified. If you have questions about calibration, contact State Extension Service specialists, equipment manufacturers or
other experts.
Chemigation Monitoring
A person knowledgeable of the chemigation system and responsible for its operation, or under the supervision of the responsible
person, shall shut the system down and make necessary adjustments should the need arise.
Drift
DO NOTapply when wind speed favors drift beyond the area intended for treatment.
Required System Safety Devices
The system must contain a functional check valve, vacuum relief valve, and low-pressure drain appropriately located on the
irrigation pipeline to prevent water source contamination from backflow. The pesticide injection pipeline must contain a functional,
automatic, quick-closing check valve to prevent the flow of fluid back toward the injection pump. The pesticide injection pipeline
must also contain a functional, normally closed, solenoid-operated valve located on the intake side of the injection pump and
connected to the system interlock to prevent fluid from being withdrawn from the supply tank when the irrigation system is either
automatically or manually shut down. The system must contain functional interlocking controls to automatically shut off the
pesticide injection pump when the water pump motor stops. The irrigation line or water pump must include a functional pressure
switch which will stop the water pump motor when the water pressure decreases to the point where pesticide distribution is
adversely affected. Systems must use a metering pump, such as a positive displacement injection pump (e.g., diaphragm pump)
effectively designed and constructed of materials that are compatible with pesticides and capable of being fitted with a system
interlock.
Using Water from Public Water Systems
Public water system means a system for the provision to the public of piped water for human consumption if such system has at
least 15 service connections or regularly serves an average of at least 25 individuals daily at least 60 days out of the year.
Chemigation systems connected to public water systems must contain a functional, reduced-pressure zone, back flow preventer
(RPZ) or the functional equivalent in the water supply line upstream from the point of pesticide introduction. As an option to the
RPZ, the water from the public water system should be discharged into a reservoir tank prior to pesticide introduction. There shall
be a complete physical break (air gap) between the outlet end of the fill pipe and to the top or overflow rim of the reservoir tank of
at least twice the inside diameter of the fill pipe. The pesticide injection pipeline must contain a functional automatic quick-closing
check valve to prevent the flow of fluid back toward the injection. The pesticide injection pipeline must contain a functional
normally-closed solenoid-operated valve located on the intake side of the injection pump and connected to the system interlock to

Page 6
prevent fluid from being withdrawn from the supply tank when the irrigation system is either automatically or manually shut down.
The system must contain functional interlocking controls to automatically shut off the pesticide injection pump when the water
pump motor stops or, in cases where there is no water pump, when the water pressure decreases to the point where pesticide
distribution is adversely affected. Systems must use a metering pump such as a positive displacement injection pump (e.g.
diaphragm pump) effectively designed and constructed of materials that are compatible with pesticides and capable of being fitted
with a system interlock.
ROTATIONAL CROPS*
Treated areas may be replanted with any crop specified on an imidacloprid label, or any crop for which a tolerance
exists for the active ingredient, as soon as practical following the last application. For crops not listed on an
imidacloprid label, or for crops for which no tolerances for the active ingredient have been established, a 12-month
plant-back interval must be observed.
IMMEDIATE PLANT-BACK:
All crops on this label plus the following crops not on this label: barley, canola, corn (field, pop & sweet), rapeseed,
sorghum, sugar beet and wheat.
30-DAY PLANT-BACK:
Cereals (including buckwheat, millet, oats, rice, rye, and triticale), soybeans and safflower
10-MONTH PLANT-BACK:
Onion and bulb vegetables
12-MONTH PLANT-BACK:All Other Crops
* Cover crops for soil building or erosion control may be planted anytime, but do not graze or harvest for food or feed.
FIELD CROPS
APPLICATION RATES
COTTON
Pests Controlled Rate
fluid ounces/Acre
Cotton aphid
Plant bugs
Thrips
Whiteflies
7.4 to 9.2
(Depending on row-spacing)
Restrictions:
Maximum amount allowed per year: 9.2 fluid ounces/Acre (0.33 lb AI/Acre)
Regardless of formulation or method of application, apply no more than 0.5 lb active ingredient per acre per year,
including seed treatment as Gaucho®, soil and foliar uses. DO NOT graze treated fields after any application of this
product. Please see Resistance Management section of this label.
Applications:
Apply specified dosage in one of the following methods:
1. In-furrow spray during planting directed on or below seed;
2. In a narrow band directly below the eventual seed row in a bedding operation 7 or fewer days before planting;
3. Chemigation into root zone through low-pressure drip or trickle irrigation.
POTATO
Pests Controlled Rate
fluid ounces/Acre
Aphids
Colorado potato beetle
Flea beetles
Leafhoppers
Potato psyllid
5.7 to 8.7
Pests / Diseases Suppressed
Symptoms of:
Potato leaf roll virus (PLRV)
Potato yellows
Net necrosis (PLRV)
Wireworms (with in-furrow spray at
planting)
5.7 to 8.7

Page 7
Restrictions:
Maximum amount allowed per year: 8.7 fluid ounces/Acre (0.31 lb AI/Acre)
Applications:
Apply specified dosage in one of the following methods:
1) In-furrow spray during planting directed on seed pieces or seed potatoes;
2) Subsurface side-dress on both sides of the row covered with 3 or more inches of soil;
3) Narrow band spray at ground cracking directly over the row during hilling covered with 3 or more inches of soil;
4) Narrow band directly below the eventual seed row in a bedding operation 7 or fewer days before planting. For
effective pest control or suppression, applications of this product must be placed below soil surface and in contact
with seed piece or within root zone. For potatoes grown on highly permeable soils with shallow water table, at-plant
applications of this product may be made in a 2 to 4 inch band (width of planter shoe opening) and completely
covered.
POTATO * - Seed Piece Treatment
Pests Controlled Rate
fluid ounces/100 lbs seed
Rate
fluid ounces/Acre
Aphids
Colorado potato beetle
Flea beetles
Leafhoppers
Potato psyllid
Wireworms (seed piece protection)
0.17 to 0.35 3.5 to 7.0
Pests / Diseases Suppressed
Symptoms of:
Potato leaf roll virus (PLRV)
Potato yellows
Net necrosis (PLRV)
0.35 7.0
Restrictions:
Maximum amount allowed per year: 8.7 fluid ounces/Acre (0.31 lb AI/Acre)
DO NOT use treated seed pieces for food, feed, or fodder. DO NOT apply any subsequent application of this
product (in-furrow), or any other imidacloprid product following an imidacloprid seed-piece treatment.
Applications:
Apply specified dosage as a diluted spray onto seed pieces using a shielded spray system. Dilute with 3 parts water,
or less, to 1 part this product. Agitate or stir spray solution as needed. Fungicidal or inert absorbent dusts may be
applied after this product’s application. Apply only in areas with adequate ventilation or in areas that are equipped to
remove spray mist or dust. Plant seed pieces as soon as possible after treating avoiding prolonged exposure of seed
pieces treated with this product to sunlight and in accordance with the recommendation of your local Extension
specialist.
Consult your local Nufarm representative or crop protection product dealer for information relevant to your area.
* Based on a seeding rate of 2000 lbs/acre.
TOBACCO
Pests Controlled
Rate
fluid ounces/1,000 plants
(as seedling tray drench)
Rate
fluid ounces/1,000 plants
(in-furrow or transplant-water)
Aphids
Flea beetles 0.5 0.6
Mole crickets
Whiteflies
Wireworms
0.6 to 1.2 0.8 to 1.2
Pests / Diseases Suppressed
Cutworms
Symptoms of:
Tomato spotted wilt virus (TSWV)
0.6 to 1.2 0.8 to 1.2

Page 8
Restrictions:
Pre-Harvest Interval (PHI): 14 days
Maximum amount allowed per year: 14.0 fluid ounces/Acre (0.50 lb AI/Acre)
Applications:
Apply specified dosage of this product in one of the following methods:
1) Uniform, broadcast foliar spray to seedlings in trays (tray drench) not more than 7 days prior to transplanting,
followed immediately by overhead irrigation to wash this product from foliage into potting media. Failure to wash
this product from foliage may result in a reduction in pest control. Transplantsshould be handled carefully during
setting to avoid dislodging treated potting media from roots.
2) In-furrow spray or transplant-water drench during setting.
3) Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment.
Important Notes:
Proper tray drench applications of this product have been shown to be the most efficacious method of application.
However, the specified rate of this product may be applied as a combination of the tray drench in the planthouse
and/or transplant-water drench in field. Adverse growing conditions may cause a delay in uptake of this product into
the plant and a delay in control.
VEGETABLE and SMALL FRUIT CROPS
APPLICATION INSTRUCTIONS
.CUCURBIT VEGETABLES 1/
Crops of Crop Group 9: Chayote (fruit), Chinese waxgourd (Chinese preserving melon), Citron melon, Cuban pumpkin,
Cucumber, Gherkin, Gourd (edible, includes hyotan, cucuzza, hechima, Chinese okra), Momordica spp. (includes balsam
apple, balsam pear, bitter melon, Chinese cucumber), Muskmelon (hybrids and/or cultivars of Cucumis melo including
true cantaloupe, cantaloupe, casaba, Crenshaw melon, golden pershaw melon, honeydew melon, honey balls, mango
melon, Persian melon, pineapple melon, Santa Claus melon, snake melon and Winter melon), Pumpkin, Squash (includes
summer squash types such as: butternut squash, calabaza, crookneck squash, Hubbard squash, scallop squash,
straightneck squash, vegetable marrow and zucchini, and winter squash types such as acorn squash and spaghetti
squash), Watermelon (includes hybrids and/or varieties of Citrullus lanatus)
Field Application Instructions
Pests Controlled
Rate
fluid ounces/Acre
Aphids
Cucumber beetles
Leafhoppers
Thrips (foliage-feeding thrips only)
Whiteflies
7.0 to 10.5
Pests / Diseases Suppressed
Bacterial wilt (as vectored by various cucumber
beetles)
Leaf silvering resulting from whitefly feeding
7.0 to 10.5
Restrictions:
Pre-Harvest Interval (PHI): 21 days
Maximum amount allowed per crop season: 10.5 fluid ounces/Acre (0.38 lb AI/Acre)
Applications:
Apply specified dosage of this product in one of the following methods:
1) Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment;
2) In-furrow spray directed on or below seed;
3) Narrow (2 or less) surface band spray over seed-line during planting incorporated to a depth of 1 to 1.5 with
sufficient irrigation within 24 hours of application;
4) Narrow band spray directly below eventual seed row in bedding operation 14 or fewer days before planting;
5) Post-seeding drench, transplant-water drench, or hill drench;
6) Subsurface side-dress on both sides of each row. This product must be incorporated into root-zone.

Page 9
Planthouse Application Instructions
Pests Controlled
Rate
fluid ounces/10,000 plants
Aphids
Whiteflies 0.44
Restrictions:
Maximum amount applied in the planthouse: 0.44 fluid ounce (0.001 56 lb AI)/10,000 plants.
Maximum number of applications in planthouse: 1
Applications:
Apply specified dosage to seedlings in trays in the planthouse, targeting soil media (tray drench), not more than 7 days
prior to transplanting, in one of the following manners:
1) Uniform, broadcast high-volume foliar spray, followed immediately by sufficient overhead irrigation to wash this
product from foliage into potting media without loss of gravitational liquid from the bottom of the tray. Failure to
wash this product from foliage may result in reduced pest control;
2) Injection into overhead irrigation system, using adequate volume to thoroughly saturate soil media without loss of
gravitational solution from the bottom of the tray.
The application made in the planthouse is not intended as a substitution for a field application. An additional field
application must be made within 2 weeks following transplanting to provide continuous protection. Applications of
higher rates or increased number of applications in planthouse may result in significant plant injury. Transplants must
be handled carefully during setting to avoid dislodging treated potting media from roots.
Important Notes:
Not all varieties of cucurbit vegetables have been tested for tolerance to this product applied to seedling flats.
Therefore, treat a small number of plants and confirm tolerance for 7 days prior to treating entire planthouse.
1/ Not for use on crops grown for seed unless allowed by state-specific 24(c) labeling.
GREENHOUSE VEGETABLES1/
Cucumber and Tomato ONLY (Mature plants in production greenhouses)
Pests Controlled Rate
fluid ounces/1,000 plants
Aphids
Whiteflies 0.6
Restrictions:
Pre-Harvest Interval (PHI): 0 days
Maximum number of applications per crop season: 1
Applications:
Apply specified dosage in a minimum of 16 gallons of water for tomatoes and 21 gallons of water for cucumbers using
soil drenches, micro-irrigation, drip irrigation, or hand-held or motorized calibrated irrigation equipment. DO NOT apply
to immature plants since phytotoxicity may occur.
Apply when infestation pressure surpasses threshold and beneficials are not able to maintain pest populations below
damage thresholds. Repellency of bumble bee pollinators and negative effects on some beneficials ( Onius sp.) can
occur when this product is applied.
Important Notes:
Many varieties of vegetables have been tested for tolerance to this product and show good safety. However, certain
varieties may show more sensitivity to this product. Therefore, treat a few plants before treating the whole greenhouse.
1/ Not for use on crops grown for seed unless allowed by state-specific 24(c) labeling.

Page 10 of 26
FRUITING VEGETABLES 1/
Crops of Crop Group 8 plus Okra: Eggplant, Ground cherry, Okra, Pepper (including bell, chili, cooking, pimento and
sweet) Tomato, Pepinos, Tomatillo
Field Application Instructions
Pests Controlled Rate
fluid ounces/Acre
Aphids
Colorado potato beetle
Flea beetles
Leafhoppers
Thrips (foliage-feeding thrips only)
Whiteflies
Okra and Pepper
7.0 to 14.0
Other Crops
7.0 to 10.5
Pests / Diseases Suppressed
Symptoms of:
Tomato mottle virus
Tomato spotted wilt virus
Tomato yellow leaf curl virus
Okra and Pepper
7.0 to 14.0
Other Crops
7.0 to 10.5
Restrictions:
Pre-Harvest Interval (PHI): 21 days
Maximum amount allowed on pepper and okra crops per crop season: 14.0 fluid ounces/Acre (0.5 lb AI/Acre)
Maximum amount allowed on other fruiting vegetable crops per crop season: 10.5 fluid ounces/Acre (0.38 lb AI/Acre)
Applications:
Apply specified dosage of this product in one of the following methods:
1) Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment;
2) In-furrow spray directed on or below seed;
3) Narrow (2" or less) surface band spray over seed-line during planting incorporated to a depth of 1 to 1.5” with
sufficient irrigation within 24 hours of application;
4) Narrow band spray directly below eventual seed row in bedding operation 14 or fewer days before planting;
5) Post-seeding drench, transplant-water drench, or hill drench;
6) Subsurface side-dress on both sides of each row. This product must be incorporated into root-zone.
Planthouse Application Instructions
Pests Controlled
Rate
fluid ounces/10,000 plants
Aphids
Whiteflies 0.44
Restrictions:
Maximum amount applied in the planthouse: 0.44 fluid ounce (0.001 56 lb AI)/10,000 plants.
Maximum number of applications in planthouse: 1
Applications:
Apply specified dosage to seedlings in trays in the planthouse, targeting soil media (tray drench), not more than 7 days
prior to transplanting, in one of the following manners:
1) Uniform, broadcast high-volume foliar spray, followed immediately by sufficient overhead irrigation to wash this
product from foliage into potting media without loss of gravitational liquid from the bottom of the tray. Failure to wash
this product from foliage may result in reduced pest control;
2) Injection into overhead irrigation system, using adequate volume to thoroughly saturate soil media without loss of
gravitational solution from the bottom of the tray.
The application made in the planthouse is not intended as a substitution for a field application. An additional field
application must be made within 2 weeks following transplanting to provide continuous protection. Applications of
higher rates or increased number of applications in planthouse may result in significant plant injury. Transplants must be
handled carefully during setting to avoid dislodging treated potting media from roots.
Important Notes:
Not all varieties of fruiting vegetables have been tested for tolerance to this product applied to seedling flats.
Therefore, treat a small number of plants and confirm tolerance for 7 days prior to treating entire planthouse.
1/ Not for use on crops grown for seed unless allowed by state-specific 24(c) labeling.

11
HERBS
Crops of Crop Subgroup 19A: Angelica, Balm (lemon balm), Basil (fresh and dried), Borage, Bumet, Camomile, Catnip,
Chervil (dried), Chinese chive, Chive, Clary, Coriander (cilantro or Chinese parsley leaves), Costmary, Culantro (leaf),
Curry (leaf), Dillweed, Horehound, Hyssop, Lavender, Lemongrass, Lovage (leaf), Marigold, Marjoram, Nasturtium,
Parsley (dried), Pennyroyal, Rosemary, Rue, Sage, Savory (summer and winter), Sweet bay (bay leaf), Tansy,
Tarragon, Thyme, Wintergreen, Woodruff, Wormwood
Pests Controlled Rate
fluid ounces/Acre
Aphids
Flea Beetles
Leafhoppers
Whiteflies
7.0 to 10.5
Pests Suppressed
Thrips (foliage-feeding thrips only) 7.0 to 10.5
Restrictions:
Pre-Harvest Interval (PHI): 14 days
Maximum amount allowed per season: 10.5 fluid ounces/Acre (0.38 lb AI/Acre)
Applications:
Apply specified dosage in one of the following methods:
1) In-furrow spray during planting directed on or below seed;
2) In-furrow spray or transplant-water drench during setting or transplanting;
3) Shanked-into or below eventual seed-line;
4) Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment.
Important Notes:
Not all crops and/or varieties listed above have been tested for phytotoxic effects. Without specific knowledge about a
particular crop and variety, Nufarm strongly recommends that only small areas or numbers of plants of each be
treated and evaluated prior to commercial use.
HEAD and STEM BRASSICA VEGETABLES and LEAF BRASSICA GREENS, plus TURNIP
TOPS1/
Crop of Crop Group 5: Broccoli, Broccoli raab (rapini), Brussels sprouts, Cabbage, Cauliflower, Cavalo broccoli, Chinese
(gai lon) broccoli, Chinese (bok choy) cabbage, Chinese (napa) cabbage, Chinese mustard (gai choy) cabbage, Collards,
Kale, Kohlrabi, Mizuna, Mustard greens, Mustard spinach, Rape greens, plus Turnip tops (leaves)
LEAFY GREENS VEGETABLES1/
Crops of Crop Subgroup 4A plus Watercress: Amaranth (leafy amaranth, Chinese spinach, tampala), Arugula
(Roquette), Chervil, Chrysanthemum (edible leaved and garland), Corn salad, Cress (garden), Cress (upland, yellow
rocket, winter cress), Dandelion, Dock (sorrel), Endive (escarole), Lettuce (head and leaf), Orach, Parsley, Purslane
(garden and winter), Raddicchio (red chicory), Spinach (including New Zealand and vine (Malabar spinach, Indian
spinach)), Watercress (commercial production only, applications must not be made to native cress growing in streams or
other bodies of water), Watercress (upland)
Pests Controlled
Rate
Fluid ounces/Acre
(on 36 inch rows)
Aphids
Leafhoppers
Thrips (foliage-feeding thrips only)
Whiteflies
4.4 to 10.5
Restrictions:
Pre-Harvest Interval (PHI): 21 days
Maximum amount allowed per crop season: 10.5 fluid ounces/Acre (0.38 lb AI/Acre)
Applications:
Apply specified dosage of this product in one of the following methods:
1) Chemigation into root-zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment;
2) In-furrow spray directed on or below seed;

12
3) Narrow (2" or less) surface band spray over seed-line during planting incorporated to a depth of 1 to 1.5” with
sufficient irrigation within 24 hours of application;
4) Narrow band spray directly below eventual seed row in bedding operation 14 or fewer days before planting;
5) Post-seeding drench, transplant-water drench, or hill drench;
6) Subsurface side-dress on both sides of each row. This product must be incorporated into root-zone.
1/ Not for use on crops grown for seed unless allowed by state-specific 24(c) labeling.
LEAFY PETIOLE VEGETABLES1/
Crops of Crop Subgroup 4B: Cardoon, Celery, Celtuce, Chinese celery (fresh leaves and stalk only), Florence fennel
(including sweet anise, sweet fennel, finocchio), Rhubarb, Swiss chard
Pests Controlled Rate
fluid ounces / Acre
Aphids
Leafhoppers
Thrips (foliage-feeding thrips only)
Whiteflies
4.4 to 10.5
Restrictions:
Pre-Harvest Interval (PHI): 45 days
Maximum amount allowed per crop season: 10.5 fluid ounces/Acre (0.38 lb AI/Acre)
Applications:
Apply specified dosage of this product in one of the following methods:
1) Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment;
2) In-furrow spray directed on or below seed;
3) Narrow (2" or less) surface band spray over seed-line during planting incorporated to a depth of 1 to 1.5” with
sufficient irrigation within 24 hours of application;
4) Narrow band spray directly below eventual seed row in bedding operation 14 or fewer days before planting;
5) Post-seeding drench, transplant-water drench, or hill drench;
6) Subsurface side-dress on both sides of each row. This product must be incorporated into root zone.
1/ Not for use on crops grown for seed unless allowed by state-specific 24(c) labeling.
LEGUME VEGETABLES1/
Crops of Crop Group 6 Except soybean, dry: Edible Podded and Succulent Shelled Pea and Bean and Dried Shelled
Pea and Bean, Bean ( Lupinus spp., includes grain lupin, sweet lupin, white lupin, and white sweet lupin), Bean
(Phaseolus spp., includes field bean, kidney bean, lima bean, navy bean, pinto bean, runner bean, snap bean, tepary
bean, wax bean), Bean ( Vigna spp., includes adzuki bean, asparagus bean, blackeyed pea, catjang, Chinese longbean,
cowpea, Crowder pea, moth bean, mung bean, rice bean, Southern pea, urd bean, yardlong bean), Pea ( Pisum spp.,
includes dwarf pea, edible-pod pea, English pea, field pea, garden pea, green pea, snow pea, sugar snap pea), Other
Beans and Peas [Broad bean (fava), Chickpea (garbanzo bean), Guar, Jackbean, Lablab bean (hyacinth bean), Lentil,
Pigeon pea, Soybean (immature seed), Sword bean]
Pests Controlled Rate
fluid ounces/Acre
Aphids
Leafhoppers
Thrips (foliage-feeding thrips only)
Whiteflies
7.0 to 10.5
Pests / Diseases Suppressed
Symptoms of:
Bean common mosaic virus (BCMV)
Bean golden mosaic virus (BGMV)
Beet curly top hybrigeminivirus (BCTV)
7.0 to 10.5

Page 13
Restrictions:
Pre-Harvest Interval (PHI): 21 days
Maximum amount allowed per crop season 10.5 fluid ounces/Acre (0.38 lb AI/Acre)
Applications:
Apply specified dosage of this product in one of the following methods:
1) Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment;
2) In-furrow spray at planting directed on or below seed;
3) In a narrow (2" or less) surface band over seed-line during planting incorporated to a depth of 1 to 1.5” with sufficient
irrigation within 24 hours following application;
4) In a narrow band directly below the eventual seed row in a bedding operation 7 or fewer days before planting;
5) As a post-seeding drench, transplant drench, or hill drench.
1/ Not for use on crops grown for seed unless allowed by state-specific 24(c) labeling.
ROOT VEGETABLES1/
Crops of Crop Subgroup 1 B except Sugarbeet: Beet (garden)2/, Burdock (edible)2/, Carrot2/, Celeriac2/, Chervil (turnip-
rooted)2/, Chicory 2/, Ginseng, Horseradish, Parsley (turnip-rooted), Parsnip 2/, Radish 2/, Oriental radish (diakon) 2/,
Rutabaga2/, Salsify (oyster plant), Salsify (black)2/, Salsify (Spanish), Skirret and Turnip2/.
Pests Controlled Rate
Fluid ounces/1,000 row-feet
Rate
Fluid ounces/Acre
Aphids
Flea beetles
Leafhoppers
Thrips (foliage-feeding thrips only)
Whiteflies
0.31 to 0.74 4.4 to 10.5
Restrictions:
Pre-Harvest Interval (PHI): 21 days
Maximum amount allowed per crop season: 10.5 fluid ounces/Acre (0.38 lb AI/Acre)
Maximum number of applications per crop season: 1
Applications:
Apply specified dosage of this product in one of the following methods:
1) Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment;
2) In-furrow spray (rate specified per 1,000 row-feet) or, shanked-in 1 to 2 inches below seed depth during planting;
3) In a narrow (2 inches or less) band directly (1 to 2 inches) below the eventual seed row in a bedding operation 14 or
fewer days before planting.
Important Notes:
The rate applied affects the length of control. Use higher specified rates within the rate range where infestations occur
later in crop
development, or where pest pressure is continuous. Rates of this product less than 0.31 fluid ounce/1,000 row-feet will
not provide adequate residual pest control. Crops treated with this product grown on very high organic matter soils
(muck) may also require additional pest management control.
1/ Not for use on crops grown for seed unless allowed by state-specific 24(c) labeling.
2/ Tops or greens from these crops may be utilized for food or feed.
TUBEROUS and CORM VEGETABLES1/
Crops of Crop Subgroup 1C: Arracacha, Arrowroot, Artichoke (Chinese and Jerusalem), Canna (edible, Queensland
arrowroot), Cassava (bitter & sweet) 2/, Chayote (root), Chufa, Dasheen (taro) 2/, Ginger, Leren, Sweetpotato, Tanier
(cocoyam)2/, Turmeric, Yam bean (jicama, manoic pea), Yam (true)2/
For applications on potato see Field Crops section for Potato - Soil
Pests Controlled Rate
Fluid ounces/1,000 row-feet
Rate
Fluid ounces/Acre
Aphids
Flea beetles
Leafhoppers
Thrips (foliage-feeding thrips only)
Whiteflies
0.31 to 0.74 4.4 to 10.5
Restrictions:
Pre-Harvest Interval (PHI) from planting application: 3 days (leaves); 125 days (corms)
Maximum amount allowed per crop season: 10.5 fluid ounces/Acre (0.38 lb AI/Acre)
Maximum number of applications per crop season: 1

Page 14
Applications:
Apply specified dosage of this product in one of the following methods:
1) In-furrow spray (rate specified per 1,000 row-feet) over planting material (hulis) or shanked-in 1 to 2 inches below
hulis depth at planting;
2) Side-dress not more than 0.26 fluid ounce/1,000 row-feet no later than 45 days after-planting. Observe same PHI as
above.
Important Notes:
The rate applied affects the length of control. Use higher specified rates within the rate range where infestations occur
later in crop development, or where pest pressure is continuous. Rates of this product less than 0.31 fluid ounce/1,000
row-feet may not provide adequate residual pest control. Crops treated with this product grown on very high organic
matter soils (muck) may also require additional pest management control.
1/ Not for use on crops grown for seed unless allowed by state-specific 24(c) labeling.
2/ Tops or greens from these crops may be utilized for food or feed.
STRAWBERRY1/
Annual and Perennial Crops
Pests Controlled Rate
fluid ounces/Acre
Aphids
Whiteflies 10.5 to 14.0
Restrictions:
Pre-Harvest Interval (PHI): 14 days
Maximum amount allowed per crop season: 14.0 fluid ounces/Acre (0.50 lb AI/Acre)
Applications:
Apply specified dosage of this product in one of the following methods:
1) Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment after
plants are established or on perennial crops in early spring prior to bud opening;
2) As a plant material or plant hole treatment just prior to, or during transplanting.
3) As a band spray over the row pre-plant in a minimum of 20 gallons of water per acre, followed immediately by
overhead irrigation to incorporate product into root zone. DO NOT use plastic or other mulch that limits movement
of this product into root zone.
The rate applied affects the length of control. Use higher specified rates within the rate range where infestations may
occur later in crop development or where pest pressure is continuous.
Post-harvest Use on Perennial Crops
Pests Controlled Rate
fluid ounces/Acre
White grub complex
(grubs of Asiatic garden beetle, European and
Masked chafer, Japanese beetle, Oriental beetle)
7.0 to 10.5
Restrictions:
Pre-Harvest Interval (PHI): 14 days
Maximum amount allowed per year: 10.5 fluid ounces/Acre (0.38 lb AI/Acre)
Applications:
Apply a single application post harvest to coincide with renovation of strawberry fields and during active
egg-laying period of beetles. Apply specified dosage of this product in one of the following methods:
1) As a ground spray via boom or backpack sprayer in a minimum of 20 gallons of water per acre;
2) As a row-band spray using an adjusted amount of product based on the treated row band area in proportion to
the amount required per full acre. The bandwidth should be equivalent to the width of the anticipated fruiting bed;
3) As a chemigation application with 600 to 1,000 gallons of water followed by 0.10 to 0.25 inch irrigation.
Important Notes:
All soil-surface applications must be followed by 0.25 inch of rainfall or overhead irrigation water per acre within 2
hours of application. Failure to adequately incorporate this product into egg-deposition zone may result in decreased
activity of beetle grubs.
1/ Not for use on crops grown for seed unless allowed by state-specific 24(c) labeling.

Page 15
SUGARBEET 1/ (For Use Only in CA)
Pests Controlled Rate
fluid ounces/Acre
Aphids
Leafhoppers
Whiteflies
Flea beetles
2.6 to 5.2
Pests / Diseases Suppressed
Symptoms of:
Western yellows / Beet curly top hybrigeminivirus (BCTV) 2.6 to 5.2
Restrictions:
Maximum amount allowed per year: 5.2 fluid ounces/Acre (0.18 lb AI/Acre)
DO NOT apply immediately prior to bud opening or during bloom or when bees are actively foraging.
Applications:
Apply specified dosage of this product in the following method:
1) Apply specified dosage in sufficient carrier volume to insure uniform application. Apply directly below each seed
furrow either during the bedding operation immediately prior to planting or at the time of planting.
The low rate may be applied to aid establishment of stands in whitefly areas, or for early season control of the other
pests listed.
1/ Not for use on crops grown for seed unless allowed by state-specific 24(c) labeling.

Page 16
TREE, BUSH and VINE CROPS
APPLICATION INSTRUCTIONS
BANANA and PLANTAIN
Pests Controlled Rate
fluid ounces/Acre
Aphids
Leafhoppers 7.0 to 14.0
Pests / Diseases Suppressed
Scales 7.0 to 14.0
Restrictions:
Pre-Harvest Interval (PHI): 0 day
Maximum amount allowed per year: 14.0 fluid ounces/Acre (0.5 lb AI/Acre)
Applications:
Apply specified dosage of this product in the following method:
Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment.
BUSHBERRY
Crops of Crop Subgroup 13B: Blueberry, Currant, Elderberry, Gooseberry, Huckleberry, Juneberry, Lingonberry, and
Salal
Pests Controlled Rate
Fluid ounces/Acre
Japanese beetle
(adults, feeding on foliage)
White grub complex
(grubs of Asiatic garden beetle, European and
Masked chafer, Japanese beetle and Oriental beetle)
7.0 to 14.0
Restrictions:
Pre-Harvest Interval (PHI): 7 days
Maximum amount allowed per year: 14.0 fluid ounces/Acre (0.50 lb AI/Acre)
DO NOT apply pre-bloom or during bloom or when bees are foraging.
Applications:
Apply specified dosage of this product in one of the following methods:
1) Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment;
2) 18-inch band on each side of the row followed with 0.25 inch of irrigation immediately after application.
For optimal grub control, apply this product to control 1st or 2nd instar larvae. Application may be made post-bloom up
to 7 days prior to harvest, or post-harvest until October 1st. For optimum control of Japanese beetle larvae, make
applications from June 1 to July 15. DO NOT apply during bloom.
Application to grass covered rows, row middles, drive lanes, headlands, and other grassy areas in and around the berry
field will control resident grub populations. Applications directed to the root zone will help protect berry plant roots from
grub feeding.
Apply this product to moist soil. If necessary, apply one hour of irrigation water immediately before application. To ensure
maximum efficacy, 0.5 to 1 inch of irrigation water or rainfall should be applied or received within 24 hours of application
of this product to facilitate movement into the soil and into the root zone.

Page 17
CANEBERRY (For Use Only in CA)
Crops of Crop Subgroup 13A including: Blackberry ( Rubus eubatus, including bingleberry, black satin berry,
boysenberry, Cherokee blackberry, Chesterberry, Cheyenne blackberry, coryberry, darrowberry, dewberry, Dirksen
thornless berry, Himalayaberry, hullberry, Lavacaberry, Loganberry, lowberry, Lucretiaberry, mammoth blackberry,
marionberry, nectarberry, olallieberry, Oregon evergreen berry, phenomenalberry, rangeberry, ravenberry, rossberry,
Shawnee blackberry, youngberry, and varieties and/or hybrids of these). Raspberry (black and red, Rubus occidentalis,
Rubus strigosus, Rubus idaeus).
Pests Controlled Rate
fluid ounces/Acre
Aphids
Leafhoppers
Whiteflies
7.0 to 14.0
Rednecked cane borer 10.5 to 14.0
Pests / Diseases Suppressed
Thrips (foliage-feeding thrips only) 7.0 to 14.0
Restrictions:
Pre-Harvest Interval (PHI): 7 days
Maximum amount allowed per year: 14.0 fluid ounces/Acre (0.5 lb AI/Acre)
DO NOT apply pre-bloom or during bloom or when bees are foraging.
Applications:
Apply specified dosage in one of the following methods:
1) Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment.
2) Basal, soil drench in a minimum of 500 gallons solution per acre.
CITRUS (Nursery and Greenhouse Container Stock)
Crops of Crop Group 10: Calamondin, Citrus citron, Citrus hybrids (includes chironja, tangelo, and tangor), Grapefruit,
Kumquat, Lemon, Lime, Mandarin (tangerine), Pummelo, Orange (sweet and sour), Tangelo, Satsuma mandarin, and
other cultivars and/or hybrids of these.
Pests Controlled Rate
mL/0.1ft3 container media
Aphids
Asian citrus psyllid
Black fly
Citrus leafminer
Leafhoppers/Sharpshooters
Mealybugs
Scales
Whiteflies
Citrus root weevil (larval complex)
0.33-0.50
Pests / Diseases Suppressed
Citrus thrips (foliage-feeding thrips only) 0.50
Applications:
Determine volume of container and calculate dosage necessary to treat container. Apply calculated dosage of this
product per container as a soil drench or through low-pressure drip or trickle irrigation water, through injection into the
overhead irrigation system, or as a broadcast high volume spray. With overhead irrigation or broadcast spray, use
additional irrigation to wash the product from the foliage into the potting medium. Use sufficient carrier volume to ensure
thorough uniform distribution throughout the media without loss of gravitational water from the container. For optimal
results, treatment should be made at planting prior to insect infestation. Retreat if necessary. For control of larvae of the
citrus root weevil complex, application should be made prior to neonate larvae entering potting media. Utilize higher
specified dosage for heavy infestations.
Restrictions:
Pre-Harvest Interval (PHI): 0 day
Maximum amount allowed per application: 0.50 mLs/0.1 ft3 container media
Maximum amount allowed per crop season: 3.0 mLs/plant
Do not apply pre-bloom or during bloom or when bees are foraging.

Page 18
CITRUS (Field)
Crops of Crop Group 10 including: Calamondin, Citrus citron, Citrus hybrids (includes chironja, tangelo, and tangor),
Grapefruit, Kumquat, Lemon, Lime, Mandarin (tangerine), Pummelo, Orange (sweet and sour), Tangelo, Satsuma
mandarin, and other cultivars and/or hybrids of these.
Pests Controlled Rate
fluid ounces/Acre
Aphids
Asian citrus psyllid
Black fly
Citrus leafminer
Leafhoppers/Sharpshooters
Mealybugs
Scales
Termites ( FL only)
Whiteflies
7.0 to 14.0
Pests / Diseases Suppressed
Citrus nematode
Symptoms of:
Citrus tristeza virus (CTV) through vector control
Citrus yellows
Thrips (foliage-feeding thrips only)
14.0
Restrictions:
Pre-Harvest Interval (PHI): 0 day
Maximum amount allowed per year: 14.0 fluid ounces/Acre (0.50 lb AI/Acre)
Applications:
Apply specified dosage of this product in one of the following methods:
1) Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment. For
optimum results, apply to newly planted trees or those previously trained to drip, trickle or micro-sprinkler
irrigation. Soil should be lightly pre-wetted to break soil surface tension prior to applications of this product.
Chemigation application can be made separate to normal irrigation but followed by 10 to 20 minutes of additional
watering to move this product into root zone. Allow 24 hours before initiating subsequent irrigations;
2) Soil surface band spray on both sides of the tree. Bands should overlap at the tree base to create a continuous
band within the drip-line area of the tree, to be followed immediately with light sprinkler irrigation sufficient to move
the product into the upper portion of the root zone. This method is suitable for very coarse soils with 0.75% organic
matter or less;
3) Drench to base of tree not exceeding one quart total solution per tree immediately around trunk of tree and
extending outward covering the entire fibrous root system of the tree. Only recommended for trees up to 8 feet tall;
4) For control of existing termite infestations, apply specified dosage in 1 to 4 quarts of total solution volume,
depending on size of tree, as a drench application to the basal portion of the tree trunk and surrounding soil in the
immediate vicinity of the tree trunk;
5) For suppression of citrus nematode, apply specific dosage through low pressure chemigation or soil surface spray
only, ensuring complete coverage of the root system and utilizing application directions stated above for the
respective application method.
Important Notes:
Repeated and regular use of this product over several consecutive growing seasons provides the greatest degree of
nematode suppression and yields the greatest plant response.
COFFEE
Pests Controlled Rate
fluid ounces/Acre
Aphids
Leafhoppers
Leafminer
7.0 to 14.0
Pests Suppressed
Scales 7.0 to 14.0
Restrictions:
Pre-Harvest Interval (PHI): 7 days
Maximum amount allowed per year: 14.0 fluid ounces/Acre (0.5 lb AI/Acre)

Page 19
DO NOT apply pre-bloom or during bloom or when bees are foraging.
Applications:
Apply specified dosage in one of the following methods:
1) Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment.
2) Subsurface side-dress shanked into the root zone on both sides of the plants followed by irrigation;
3) Basal, soil drench in sufficient water to insure incorporation into the root zone followed by irrigation.
CRANBERRY
Pests Controlled Rate
Fluid ounces/Acre
Rootgrubs (Scarabaeidae)
Rootworms (Chrysomelidae) 7.0 to 14.0
Restrictions:
Pre-Harvest Interval (PHI): 30 days
Maximum amount allowed per year: 14.0 fluid ounces/Acre (0.50 lb AI/Acre)
DO NOT apply pre-bloom or during bloom or when bees are foraging.
Applications:
Apply this product to moist soil. Apply specified dosage of this product in one of the following methods:
1) As a soil spray (ground application) directed to the root and crown area using a minimum of 20 gal of water per
acre;
2) As a chemigation application with 600 to 1,000 gallons water.
Immediately upon application, this product must be incorporated into root zone by 0.1 to 0.3 inch water/Acre, either with
the chemigation application or through irrigation/rainfall if not applied through chemigation. Inadequate incorporation
within 24 hours of application may result in reduced control.
Important Notes:
Make post-bloom application immediately after bees are removed to control rootgrubs and rootworms. Applications
should target early instar larvae.
This product has not been tested for crop response in tank mixes with other registered fungicides or insecticides. If
tank mixing is desired, premix a sample of this product and the desired fungicide or insecticide partner at labeled rates
and apply to a small area. Evaluate crop response within 48 hours and for at least two weeks prior to utilizing the tank
mix on larger acreage. If crop injury results from the premix test, do not apply the tank mix to larger acreage.
GRAPE
American bunch grape, Muscadine grape and Vinifera grape
Pests Controlled Rate
fluid ounces/Acre
European fruit lecanium
Leafhoppers/Sharpshooters
Mealybugs
Phylloxera*spp
7.0 to 14.0
Pests / Diseases Suppressed
Grapeleaf skeletonizer
Nematodes
Pierce's disease
10.5 to 14.0
Restrictions:
Pre-Harvest Interval (PHI): 30 days
Maximum amount allowed per year:14.0 fluid ounces/Acre (0.50 lb AI/Acre)
Applications:
Apply specified dosage of this product in one of the following methods:
1) Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment;
2) Subsurface side-dress shanked into the root zone on both sides of the plants followed by irrigation;
3) Hill drench in sufficient water to insure incorporation into the root zone followed by irrigation.
4) For suppression of nematodes, apply 14 fluid ounces in a single application or two 7-fluid ounce applications on a
30 to 45-day interval. Apply only by 1) chemigation into root zone through above ground low pressure drip, tickle,
micro sprinkler or equivalent equipment or 2) French plow technique, followed immediately by sufficient irrigation to
move the product into the entire root zone of the plant. Repeated and regular use of this product over several
consecutive growing seasons provides the greatest degree of nematode suppression and yields the greatest plant

Page 20
response.
For optimum results, make application between bud-break and the pea-berry stage. A total of 14 fluid ounces/acre is
recommended under the following conditions:
1) Where vigorous vine growth is expected
2) In warmer growing areas
3) Where mealybug and European fruit lecanium populations are expected to be heavy
4) Where vine populations exceed 600 per acre, or;
5) For suppression of nematodes
* Repeated and regular use of this product over several, consecutive growing seasons controls existing Phylloxera
infestations over time or prevents Phylloxera from becoming established.
HOPS
Pests Controlled Rate
Fluid ounces/Acre
Aphids 2.8 to 8.4
Restrictions:
Pre-Harvest Interval (PHI): 60 days
Maximum amount allowed per year: 8.4 fluid ounces/Acre (0.30 lb AI/Acre)
Applications:
Apply specified dosage of this product in one of the following methods:
1) Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment;
2) Subsurface side-dress shanked into the root zone on both sides of the plants followed by irrigation;
3) Hill drench in sufficient water to insure incorporation into the root zone followed by irrigation.
Use higher specified dosages where extended residual control is desired or for treating larger vines or vines with
dense foliage volume.
POME FRUIT
Crops of Crop Group 11: Apple, Crabapple, Loquat, Mayhaw, Pear (including Oriental pear), Quince
Pests Controlled Rate
Fluid ounces/Acre
Aphids (including woolly apple aphid)
Leafhoppers 7.0 to 10.5
Restrictions:
Pre-Harvest Interval (PHI): 21 days
Maximum amount allowed per year: 10.5 fluid ounces/Acre (0.38 lb AI/Acre)
DO NOT apply pre-bloom or during bloom or when bees are foraging.
Applications:
Apply specified dosage of this product in the following method:
1) Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment.
POMEGRANATE
Pests Controlled Rate
Fluid ounces/Acre
Aphids
Leafhoppers/Sharpshooters
Whiteflies
7.0 to 14.0
Restrictions:
Pre-Harvest Interval (PHI): 0 day
Maximum amount allowed per year: 14.0 fluid ounces/Acre (0.5 lb AI/Acre)
DO NOT apply pre-bloom or during bloom or when bees are foraging.
Applications:
Apply specified dosage of this product in the following method:
1) Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment.

Page 21
STONE FRUIT
Crops of Crop Group 12: Apricot, Cherry (including sweet and tart), Nectarine, Peach, Plum (including Chickasaw,
Damson and Japanese), Plumcot, Prune (fresh and dried)
In-field, Soil Application
Pests Controlled Rate
fluid ounces/Acre
Aphids (including woolly apple aphid)
Leafhoppers 7.0 to 10.5
Restrictions:
Pre-Harvest Interval (PHI): 21 days
Maximum amount allowed per year: 10.5 fluid ounces/Acre (0.38 lb AI/Acre) DO NOT apply pre-bloom or during bloom
or when bees are foraging.
Applications:
Apply specified dosage of this product in the following method:
1) Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment.
Pre-plant, Root Dip Application
Pests Controlled
Rate
fluid ounces/10 gallons root-dip solution
Black peach aphid (infesting roots) 0.87
Mix this product at a rate of 0.87 fluid ounces per 10 gallons of water. Thoroughly wet bare-root transplant to slightly above
the graft union by soaking roots in this product's solution for up to 5 minutes. Allow solution to dry on roots and transplant
trees as soon as possible following treatment.
TREE NUTS
Crops of Crop Group 14 except Almond: Beechnut, Brazil nut, Butternut, Cashew, Chestnut, Chinquapin, Filbert,
Hickory nut, Macadamia nut, Pecan, Pistachio, Walnut (black and English)
Pests Controlled Rate
fluid ounces/Acre
Aphids
Leafhoppers/Sharpshooters
Mealybugs
Spittlebugs
Termites
Whiteflies
7.0 to 14.0
Pests / Diseases Suppressed
Pecan scab (from reduction in honeydew deposition) 7.0 to 14.0
Thrips (foliage-feeding thrips only) 14.0
Restrictions:
DO NOT use in Almonds
Pre-Harvest Interval (PHI): 7 days
Maximum amount allowed per year: 14.0 fluid ounces/Acre (0.50 lb AI/Acre)
DO NOT apply pre-bloom or during bloom or when bees are foraging.
Applications:
Apply specified dosage prior to or at onset of pest infestation in one of the following methods:
1) Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment. Pre-wet soil
prior to applications of this product and allow soil to dry following application and prior to subsequent irrigation;
2) Emitter or spot application in a minimum of 4 fluid ounces of mixture per emitter site;
3) Shank or subsurface side-dress, injected to a depth just above or just within the root zone and between the trunk and
drip line of the tree canopy. Product should be applied in a minimum of 10 gallons per acre using multiple shanks on
both sides of trees. Ensure product placement is below sod or orchard floor debris. Irrigation covering entire treated
area should follow within 48 hours to promote uptake by root system.
4) For control of termites, apply specified dosage to slightly moist soil as a high-volume drench to the basal portion of
the tree trunk and surrounding soil in the immediate vicinity of the tree trunk. Utilize sufficient carrier volume to
penetrate the soil to a depth of 18 to 24 inches to obtain optimum control. Allow soil to dry following treatment and
prior to applying any irrigation.

Page 22
Important Notes:
Use the higher specified rates within the rate range when applied by shank or subsurface side-dress, used on larger
trees, soils with high clay content, for high plant populations, and/or where extended control is desired. Under some
conditions, control may not occur for 14 or more days or until two (2) irrigations have been made. Applications made later
in the season may result in reduced efficacy.
TROPICAL FRUIT - SOIL
Including: Acerola, Atemoya,, Avocado, Birida, Black sapote, Canistel, Cherimoya, Custard apple, Feijoa, Jaboticaba,
Guava, Llama, Longan, Lychee, Mamey sapote, Mango, Papaya, Passionfruit, Persimmon, Pulasan, Rambutan,
Sapodilla, Soursap ,, Spanish lime, Star apple, Starfruit, Sugar apple, Wax jambu
Pests Controlled Rate
fluid ounces/Acre
Aphids
Avocado Lacebugs
Leafhoppers
Whiteflies
10.5 to 14.0
Pests / Diseases Suppressed
Scales
Thrips (foliage-feeding thrips only) 14.0
Restrictions:
Pre-Harvest Interval (PHI): 6 days
Maximum amount allowed per year: 14.0 fluid ounces/Acre (0.50 lb AI/Acre).
DO NOT apply pre-bloom or during bloom or when bees are foraging.
Applications:
Apply specified dosage of this product in the following method:
1) Chemigation through low-pressure drip, trickle, micro-sprinkler or equivalent equipment.
CHRISTMAS TREE
Pests Controlled Rate
Fluid ounces / Acre
White grub complex
(damage from grubs of Asiatic garden beetle, European and
Masked chafer, Japanese beetle and oriental beetle)
7.0 to 14.0
Restrictions:
Maximum amount allowed per year: 14.0 fluid ounces/Acre (0.5 lb AI/Acre)
Applications:
Soil incorporation and movement of this product to the root zone is required for activity. This product can be incorporated
most readily when applied to moist soil. Apply specified dosage in one of the following methods:
1) Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment;
2) 18-inch band on each side of the row (small trees) to full broadcast application (large trees) followed by rainfall or 0.25
to 1 inch of irrigation within 12 hours after application.
Important Notes:
For optimal grub control, apply this product during adult flight activity, or up to mid-July, when first instar larvae are
present.

Page 23
POPLAR/COTTONWOOD1/
(Includes members of the genus Populus grown for pulp or timber)
Pests Controlled Rate
fluid ounces/Acre
Aphids
Cottonwood leaf beetle 7.0 to 14.0
Pests / Diseases Suppressed
Phylloxerina popularia 7.0 to 14.0
Restrictions:
Maximum amount allowed at-plant per year: 14.0 fluid ounces/Acre (0.50 lb AI/Acre)
DO NOT apply pre-bloom or during bloom or when bees are foraging.
Applications:
Apply specified dosage of this product in the following method:
1) Chemigation through low-pressure drip irrigation.
2) For narrow row, cutting orchards/nurseries used for plant propagation, shank into root zone followed by adequate
irrigation to promote uptake. Adequate irrigation depends on soil moisture level at application. Under dry conditions
0.25 inch/acre is recommended.
For Cottonwood leaf beetle, protection against damage will occur when application is made early-season, when beetles
first begin feeding. Larger trees may require earlier treatment as a result of slower uptake.
For Phylloxerina, apply early in the year, from break of dormancy through May.
1/ Use not permitted in California unless otherwise directed by state-specific 24(c) labeling.
Cutting/Whip Application Instructions. See details above for Field Application Instructions. 1/
Pests Controlled Cutting Whip Soaking Solution
fluid ounces of this product needed per 100 gallons
Cottonwood leaf beetle 5.8 to 11.6 (unhydrated cuttings/whips)
11.6 to 17.5 (partially hydrated cuttings/whips)
Pests / Diseases Suppressed
Aphids
Phylloxerina popularia
5.8 to 11.6 (unhydrated cuttings/whips)
11.6 to 17.5 (partially hydrated cuttings/whips)
Restrictions:
Maximum amount allowed at-plant per year: 14.0 fluid ounces/Acre (0.50 lb AI/Acre)
Applications:
Apply this product in one of the following cuttings/whips soaking methods:
1) For freshly cut (hydrated) cuttings/whips, soak plant material in specified solution concentration for 24 hours prior to
cold storage. After removal from cold storage, plant as needed.
2) For previously hydrated cuttings/whips removed from cold storage, allow plant material to reach room temperature and
soak in specified solution concentration for 24 hours prior to planting.
Proper care should be taken in disposal of any residual soaking solution. Solution may be applied to existing trees or
other registered crops as long as all product label precautions and restrictions are observed.
Important Notes:
Moisture content of cuttings/whips prior to application, the solution concentration and the length of soaking interval interact
to affect the amount of product absorbed into plant material. For a constant soaking interval of 24 hours, drier
cuttings/whips absorb a higher quantity of solution and require a lower concentration. Conversely, more hydrated
cuttings/whips absorb less solution and require a higher concentration. Soaking of cuttings/whips should occur in a
covered container in absence of UV light. Not all Populus sp. clones/varieties/hybrids have been tested for crop safety.
Without specific knowledge about a particular Populus sp. clone/variety/hybrid, a small number of cuttings/whips of each
should be treated and evaluated prior to commercial use.
1/ Use not permitted in California unless otherwise directed by state-specific 24(c) labeling.

Page 24
STORAGE AND DISPOSAL
DO NOT contaminate water, food, or feed by storage or disposal.
PESTICIDE STORAGE: Store in a cool, dry place and in such a manner as to prevent cross contamination with other
pesticides, fertilizers, food, and feed. Store in original container and out of the reach of children, preferably in a locked
storage area.
Handle and open container in a manner as to prevent spillage. If the container is leaking, invert to prevent leakage. If
container is leaking or material spilled for any reason or cause, carefully dam up spilled material to prevent runoff. Refer to
Precautionary Statements on label for hazards associated with the handling of this material. DO NOT walk through spilled
material. Absorb spilled material with absorbing type compounds and dispose of as directed for pesticides below. In spill
or leak incidents, keep unauthorized people away.
PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be disposed of on-site or at an approved
waste disposal facility.
CONTAINER DISPOSAL [HANDLING]:
[Nonrefillable Containers 5 Gallons or Less]
Nonrefillable container. DO NOT reuse or refill this container. Offer for recycling if available. Triple rinse container (or
equivalent) promptly after emptying.
Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds
after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into
application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to
drip. Repeat this procedure two more times. Then offer for recycling or reconditioning, or puncture and dispose of in a
sanitary landfill, or by other procedures approved by State and local authorities. Plastic containers are also disposable by
incineration, or, if allowed by State and local authorities, by burning. If burned stay out of smoke.
[Nonrefillable containers larger than 5 gallons]
Nonrefillable container. DO NOT reuse or refill this container. Offer for recycling if available. Triple rinse or pressure
rinse container (or equivalent) promptly after emptying.
Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container 1/4 full
with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one
complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Turn the
container over onto its other end and tip it back and forth several times. Empty the rinsate into application equipment or a
mix tank or store rinsate for later use or disposal. Repeat this procedure two more times. Pressure rinse as follows: Empty
the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins
to drip. Hold container upside down over application equipment or mix tank and continue to drain for 10 seconds after the
flow begins to drip. Hold container upside down over application equipment or mix tank or collect rinsate for later use or
disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 psi for at least 30 seconds. Drain
for 10 seconds after the flow begins to drip.
[Refillable containers larger than 5 gallons]
Refillable container. Refill this container with pesticide only. DO NOT reuse this container for any other purpose.
Cleaning the container before final disposal is the responsibility of the person disposing of the container. Cleaning before
refilling is the responsibility of the refiller. To clean the container before final disposal, empty the remaining contents from
this container into application equipment or a mix tank. Fill the container about 10% full with water and, if possible, spray
all sides while adding water. If practical, agitate vigorously or recirculate water with the pump for two minutes. Pour or
pump rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times.
[Refillable containers for return to Nufarm]
Refillable container. Refill this container with pesticide only. DO NOT reuse this container for any other purpose. Close
all openings and replace all caps. Contact Nufarm’s Customer Service Department at 1-800-345-3330 to arrange for
return of the empty refillable container.

Page 25
WARRANTY DISCLAIMER
The directions for use of this product must be followed carefully. TO THE EXTENT CONSISTENT WITH
APPLICABLE LAW, (1) THE GOODS DELIVEREDTOYOU ARE FURNISHED “AS IS” BY MANUFACTURER OR
SELLER AND (2) MANUFACTURER AND SELLER MAKE NO WARRANTIES, GUARANTEES, OR
REPRESENTATIONS OF ANY KIND TO BUYER OR USER, EITHER EXPRESS OR IMPLIED, OR BY USAGE OF
TRADE, STATUTORY OR OTHERWISE, WITH REGARD TO THE PRODUCT SOLD, INCLUDING, BUT NOT LIMITED
TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, USE, OR ELIGIBILITY OF THE PRODUCT
FOR ANY PARTICULARTRADE USAGE. UNINTENDED CONSEQUENCES, INCLUDING BUT NOT LIMITED TO
INEFFECTIVENESS, MAY RESULT BECAUSE OF SUCH FACTORS AS THE PRESENCE OR ABSENCE OF OTHER
MATERIALS USED IN COMBINATION WITH THE GOODS, OR THE MANNER OF USE OR APPLICATION,
INCLUDING WEATHER, ALL OF WHICH ARE BEYOND THE CONTROL OF MANUFACTURER OR SELLER AND
ASSUMED BY BUYER OR USER. THIS WRITING CONTAINS ALL OF THE REPRESENTATIONS AND AGREEMENTS
BETWEEN BUYER, MANUFACTURER AND SELLER, AND NO PERSON OR AGENT OF MANUFACTURER OR
SELLER HAS ANY AUTHORITY TO MAKE ANY REPRESENTATION OR WARRANTY OR AGREEMENT RELATING
IN ANY WAY TO THESE GOODS.
LIMITATION OF LIABILITY
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, IN NO EVENT SHALL MANUFACTURER OR SELLER BE
LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, OR FOR DAMAGES IN THEIR NATURE
OF PENALTIES RELATING TO THE GOODS SOLD, INCLUDING USE, APPLICATION, HANDLING, AND DISPOSAL.
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, MANUFACTURER OR SELLER SHALL NOT BE LIABLE TO
BUYER OR USER BYWAY OF INDEMNIFICATION TO BUYER OR TO CUSTOMERS OF BUYER, IF ANY, OR FOR
ANY DAMAGES OR SUMS OF MONEY, CLAIMS OR DEMANDS WHATSOEVER, RESULTING FROM OR BY REASON
OF, OR RISING OUT OF THE MISUSE, OR FAILURE TO FOLLOW LABEL WARNINGS OR INSTRUCTIONS FOR
USE, OF THE GOODS SOLD BY MANUFACTURER OR SELLER TO BUYER. ALL SUCH RISKS SHALL BE
ASSUMED BYTHE BUYER, USER, OR ITS CUSTOMERS.TOTHE EXTENT CONSISTENT WITH APPLICABLE LAW,
BUYER'S OR USER'S EXCLUSIVE REMEDY, AND MANUFACTURER'S OR SELLER'S TOTAL LIABILITY SHALL BE
FOR DAMAGES NOT EXCEEDING THE COST OF THE PRODUCT.
If you do not agree with or do not accept any of directions for use, the warranty disclaimers, or limitations on
liability, do not use the product, and return it unopened to the Seller, and the purchase price will be refunded.
(RV052714)
NUPRID is a registered trademark of Nufarm Americas Inc.
All other trademarks are the property of their respective owners.