crop-chem-docs/corpus/epa_ppls/228-600.md

# NUP 08136

- EPA Reg No: **228-600**
- Registrant: NUFARM AMERICAS, INC.
- Signal word: Caution
- Active ingredients: Chlorsulfuron (15%); Metsulfuron-methyl (48%)
- Label accepted: 2024-08-28
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000228-00600-20240828.pdf

---
August 28, 2024 
 
Nikki Benson 
Regulatory Specialist 
Nufarm Americas Inc. 
11901 S. Austin Ave. 
Alsip, IL 60803 
 
Subject: Label Amendment - Registration Review Mitigation for Metsulfuron-methyl & 
Chlorsulfuron-methyl 
 Product Name: NUP 08136 
 EPA Registration Number: 228-600 
 Application Dates: January 23, 2024 
Decision Numbers: 596160 & 594961 
 
Dear Nikki Benson: 
 
The Agency, in accordance with the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), 
as amended, has completed reviewing all the information submitted with your application to 
support the Registration Review of the above referenced product in connection with the 
Metsulfuron-methyl & Chlorsulfuron-methyl Interim Decisions, and has concluded that your 
submission is acceptable. The label referred to above, submitted in connection with registration 
under FIFRA, as amended, is acceptable. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please 
be aware that the website becomes labeling under the Federal Insecticide, Fungicide, and 
Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the 
product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 
40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In 
addition, regardless of whether a website is referenced on your product’s label, claims made on 
the website may not substantially differ from those claims approved through the registration 
process. Therefore, should the Agency find or if it is brought to our attention that a website 
contains false or misleading statements or claims substantially differing from the EPA approved 
registration, the website will be referred to the EPA’s Office of Enforcement and Compliance 
Assurance. 
 
A stamped copy of your labeling is enclosed for your records. This labeling supersedes 
all previously accepted labeling and must be used at your next label printing. You must

Page 2 of 2 
EPA Reg. No. 228-600 
Decision No. 596160 & 
 
submit one copy of the final printed labeling before you release the product for 
shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may 
distribute or sell this product under the previously approved labeling for 12 months 
from the date of this letter. After 12 months, you may only distribute or sell this 
product if it bears this new revised labeling or subsequently approved labeling. “To 
distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation 
at 40 CFR 152.3. 
 
If you have any questions about this letter, please contact Caleb Carr by phone at (202) 566-
0636, or via email at carr.caleb@epa.gov. 
 
 Sincerely, 
 
 
 Linda Arrington, Branch Chief 
 Risk Management and Implementation Branch 4 
 Pesticide Re-Evaluation Division 
 Office of Pesticide Programs 
 
 
 
ENCLOSURE: Stamped label

CHLORSULFURON &
METSULFURON - METHYL GROUP 2 HERBICIDES
NUP-08136 HERBICIDE
Dispersible Granule
For Use on Pastures, Rangeland or Established Grasses on Acres Enrolled in the Conservation Reserve 
Program and on Wheat and Barley.
ACTIVE INGREDIENTS:
Metsulfuron Methyl: ethyl 2-[[[[(4-methoxy-6-methyl-1,3,5-triazin-
2yl)amino]carbonyl]amino]sulfonyl]benzoate .................................................................................48.0%
Chlorsulfuron: 2-Chloro-N-[(4-methoxy-6-methyl-1,3,5-triazin-2-yl)aminocarbonyl]
benzenesulfonamide ......................................................................................................................15.0%
OTHER INGREDIENTS:................................................................................................................37.0%
TOTAL: ........................................................................................................................................100.0%
KEEP OUT OF REACH OF CHILDREN
CAUTION/PRECAUCION
SEE [BELOW] [INSIDE BOOKLET] [BACK PANEL] FOR [FIRST AID] [AND] [ADDITIONAL] 
[PRECAUTIONARY STATEMENTS] [AND] [DIRECTIONS FOR USE]
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle.
(If you do not understand this label, find someone to explain it to you in detail).
For Chemical Spill, Leak, Fire, or Exposure, Call CHEMTREC (800) 424-9300
For Medical Emergencies Only, Call (877) 325-1840
.
MANUFACTURED BY
EPA REG. NO. 228-600 
 NUFARM AMERICAS INC.
EPA EST. NO.
 11901 S. AUSTIN AVE.
 ALSIP, IL 60803
NET [WEIGHT] [CONTENTS]__________________LBS. (____________Kg)
[Designation as “NONREFILLABLE” or “REFILLABLE” for containers > 50 Lbs.]
000228-00600.20240821
Aug 28, 2024
228-600

2 
PRECAUTIONARY STATEMENTS 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
CAUTION/PRECAUCION 
Harmful if absorbed through skin or if swallowed. Causes moderate eye irritation. Avoid contact with eyes 
or clothing. Avoid contact with skin or, clothing. Wash thoroughly with soap and water after handling and 
before eating, drinking, chewing gum, or using tobacco. 
 
PERSONAL PROTECTIVE EQUIPMENT (PPE): 
 
Mixers, loaders, applicators, and other handlers must wear: 
• Long-sleeved shirt and long pants 
• Waterproof gloves 
• Shoes plus socks 
Follow manufacturer's instructions for cleaning/mai ntaining PPE. If no such instructions for washables 
exist, use detergent and hot water. Keep and wash PPE separately from other laundry. 
 
Engineering Controls Statement: 
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements 
listed in the Worker Protection Standard (WPS) for ag ricultural pesticides [40 CFR 170.240(d)(4-6)], the 
handler PPE requirements may be reduced or modified as specified in the WPS. 
USER SAFETY RECOMMENDATIONS 
Users Should: 
x Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. 
x Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean 
clothing. If pesticide gets on skin, wash immediately with soap and water. 
x Remove PPE immediately after handling this produc t. Wash the outside of gloves before removing. 
As soon as possible wash thoroughly and change into clean clothing. 
 
 
FIRST AID 
IF SWALLOWED: x Call a poison control center or doctor immediately for treatment advice. 
x Have person sip a glass of water if able to swallow. 
x Do not induce vomiting unless told to do so by the poison control center or 
doctor. 
x Do not give anything by mouth to an unconscious person. 
IF IN EYES: x Hold eye open and rinse slowly and gently with water for 15-20 minutes. 
x Remove contact lenses, if present, afte r the first 5 minutes, then continue 
rinsing eye. 
x Call a poison control center or doctor for treatment advice. 
IF ON SKIN OR 
CLOTHING: 
x Take off contaminated clothing. 
x Rinse skin immediately with plenty of water for 15-20 minutes. 
x Call a poison control center or doctor for treatment advice. 
HOT LINE NUMBER 
Have the product container or label with you when cal ling a poison control center or doctor, or going for 
treatment. You may also contact 1-877-325-1840 for emergency medical treatment information.

3 
ENVIRONMENTAL HAZARDS 
 
Groundwater Advisory: Chlorsulfuron and metsulfuron-methyl are known to leach through soil into 
groundwater under certain conditions as a result of label use. This chemical may leach into groundwater if 
used in areas where soils are permeable, particularly where the water table is shallow. 
 
Surface Water Advisory: This product may impact surface water quality due to runoff of rain water. This 
is especially true for poorly draining soils and soils with shallow ground water. This product is classified as 
having high potential for reaching surface water vi a runoff for weeks after application. A level, well-
maintained vegetative buffer strip between areas to which this product is applied and surface water 
features such as ponds, streams, and springs will reduce the potential loading of chlorsulfuron and 
metsulfuron-methyl from runoff water and sediment. Runoff of this product will be greatly reduced by 
avoiding applications when rainfall or irrigation is expected to occur within 48 hours. 
 
Non-target Organism Advisory: This product is toxic to plants and may adversely impact the forage and 
habitat of non-target organisms, in cluding pollinators, in areas adjace nt to the treated area. Protect the 
forage and habitat of non-target organisms by minimizing spray drift. For further guidance and instructions 
on how to minimize spray drift, refer to the Spray Drift Management section of this label. 
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
Do not apply this product in a way that will contact wo rkers or other persons, either directly or through 
drift. Only protected handlers may be in the area du ring application. For any requirements specific to 
your State or Tribe, consult the agency responsible for pesticide regulation. 
 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard 40 CFR 
Part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, 
nurseries, and greenhouses, and handlers of agricultur al pesticides. It contains requirements for training, 
decontamination, notification, and emergency assistan ce. It also contains specific instructions and 
exceptions pertaining to the statements on this la bel about personal protecti ve equipment (PPE), and 
restricted-entry intervals. The requirements in this box only apply to uses of this product that are covered 
by the Worker Protection Standard. 
Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 4 hours. 
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and 
that involves contact with anything that has been treated, such as plants, soil, or water, is: 
x Coveralls 
x Waterproof gloves 
x Shoes plus socks 
Use NUP-08136 only in accordance with directions on this label or in separate published Nufarm 
directions. Nufarm will not be responsible for losses or damages resulting from the use of this product in 
any manner not specifically directed by Nufarm. 
 
Do not apply this product through any type of irrigation system. 
 
PESTICIDE HANDLING 
All operators must be trained handling in the proper handling of this herbicide. All spray equipment must 
be routinely checked and calibrated prior to use. St ore this product away from well sites. Dose levels 
must be verified before mixing. Prepare spray solution s according to the directions on this label, do not 
overfill spray tank, and dispose of container rinsates by adding to the spray tank. Do not prepare more 
spray solution than is necessary for the day’s applicat ion, and do not discard excess material at a single 
spot on the soil in the field or near the location for mixing/loading. Read and follow all precautions and 
restrictions on this label.

4 
 
 
MANDATORY SPRAY DRIFT MANAGEMENT 
Aerial Applications: 
• Do not release spray at a height greater than 10 feet above the vegetative canopy, unless a greater 
application height is necessary for pilot safety. 
• For applications prior to the emergence of crops an d target weeds, applicators are required to use a 
Coarse or coarser droplet size (ASABE S641). 
• For all other applications, applic ators are required to use a Medium or coarser droplet size (ASABE 
S641). 
• The boom length must not exceed 65% of the wi ngspan for airplanes or 75% of the rotor blade 
diameter for helicopters. 
• Applicators must use ½ swath displacement upwind at the downwind edge of the field. 
• Nozzles must be oriented so the spray is directed toward the back of the aircraft. 
• Do not apply when wind speeds exceed 10 miles per hour at the application site. 
• Do not apply during temperature inversions. 
 
Ground Boom Applications: 
• Apply with the nozzle height recommended by the manufacturer, but no more than 3 feet above the 
ground or crop canopy unless making a turf, pasture, or rangeland application, in which case 
applicators may apply with a nozzle height no more than 4 feet above the ground. 
 
• For applications prior to the emergence of crops an d target weeds, applicators are required to use a 
Coarse or coarser droplet size (ASAE S572.3). 
• For all other applications, applicators are requir ed to use a Medium or coarser droplet size ( ASAE 
S572.3). 
• Do not apply when wind speeds exceed 10 miles per hour at the application site. 
• Do not apply during temperature inversions. 
 
Boom-less Ground Applications: 
• Applicators are required to use a Medium or coarser droplet size (ASAE S572.3) for all applications. 
• Do not apply when wind speeds exceed 10 miles per hour at the application site. 
• Do not apply during temperature inversions. 
 
SPRAY DRIFT ADVISORIES 
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT. BE AWARE OF 
NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS. 
 
IMPORTANCE OF DROPLET SIZE 
An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide 
target pest control. While applying larger droplets will reduce spray drift, the potential for drift will be 
greater if applications are made improperly or under unfavorable environmental conditions. 
 
Controlling Droplet Size – Ground Boom 
• Volume - Increasing the spray volume so that larger droplets are produced will reduce spray drift. Use 
the highest practical spray volume for the applicatio n. If a greater spray volume is needed, consider 
using a nozzle with a higher flow rate. 
• Pressure - Use the lowest spray pressure recommended for the nozzle to produce the target spray 
volume and droplet size. 
• Spray Nozzle - Use a spray nozzle that is designed for the intended application. Consider using nozzles 
designed to reduce drift. 
 
Controlling Droplet Size – Aircraft 
• Adjust Nozzles - Follow nozzle manufacturers recommendation s for setting up nozzles. Generally, to 
reduce fine droplets, nozzles should be oriented parallel with the airflow in flight. 
 
BOOM HEIGHT – Ground Boom Use the lowest boom height that is compatible with the spray nozzles

5 
that will provide uniform coverage. For ground equipm ent, the boom should remain level with the crop 
and have minimal bounce. 
 
RELEASE HEIGHT - Aircraft 
Higher release heights increase the potential for spra y drift. When applying aerially to crops, do not 
release spray at a height greater than 10 feet above the crop canopy, unless a greater application height 
is necessary for pilot safety. 
 
SHIELDED SPRAYERS 
Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify 
that the shields are not interfering with the uniform deposition of the spray on the target area. 
 
TEMPERATURE AND HUMIDITY 
When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation. 
 
TEMPERATURE INVERSIONS 
Drift potential is high du ring a temperature inversion. Temperature inversions are characterized by 
increasing temperature with altitude and are common on nights with limited cloud cover and light to no 
wind. The presence of an inversion can be indicated by ground fog or by the movement of smoke from a 
ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated 
cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly 
dissipates indicates good vertical air mixing. Avoid applications during temperature inversions. 
 
WIND 
Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND 
CONDITIONS. 
Applicators need to be familiar with local wind patterns and terrain that could affect spray drift. 
 
Boom-less Ground Applications: 
• Setting nozzles at the lowest effective height will help to reduce the potential for spray drift. 
 
Handheld Technology Applications: 
• Take precautions to minimize spray drift. 
 
ENVIRONMENTAL CONDITIONS AND ACTIVATION OF NUP-08136 
NUP-08136 moves into plants by ab sorption through the roots and foliage and rapidly inhibits the growth 
of susceptible weeds. Within one to three weeks af ter application, broadleaf weed growth slows, leaves 
of susceptible plants become yellow to white in color, and growing points die. Within four to six weeks 
after application, these effects are seen in annual weeds. Effects on perennial weeds and woody plants 
are seen one season following the application. 
 
For optimum preemergence control of target weeds, NUP-08136 needs to reach the weed roots. 
Irrigation–rainfall or sprinkler irrigation –after an application (1-2 inches) moves the NUP-08136 into the 
top few inches of the soil and into the weed root zone. As the amount of crop or weed residue increases 
or if soils are fine in texture, an increased the amount of moisture is required for activation. When little or 
no rainfall or irrigation is receiv ed after an application, weeds that germinate will not be controlled 
because the NUP-08136 was not moved into the weed root zone by the moisture. 
 
Optimum control of weeds shaded by rapidly growing crops or grasses is achieved with NUP-08136. 
Ineffective control of weeds may be seen where grass stands are thin. If the canopy of the grasses 
completely intercepts the spray solution, weed control will be reduced. 
 
Under normal conditions, NUP-08136 will not harm desirable grasses. Injury to grasses may result from 
application of NUP-08136 to grasses that are growing under stress (due to extreme temperatures or 
moisture, abnormal soil conditions, or cultural practices) or to certain sensitive grass varieties.

6 
Poor weed and brush control may be observed if rainfa ll, sprinkler irrigation, or snowfall occurs shortly 
after application. Under cold, dry conditions moveme nt of NUP-08136 into the root zone of weeds and 
brush will be delayed. NUP-08136 is less effective to weeds and brush hardened off by cold weather or 
under stress from lack of water. 
 
WEED RESISTANCE MANAGEMENT
 
For resistance management, this produc t contains two Group 2 herbicides – chlorsulfuron and 
metsulfuron-methyl. Any weed population may contain or develop plants naturally resistant to this product 
and other Group 2 herbicides. The resistant biotyp es may dominate the weed population if these 
herbicides are used repeatedly in the same field. Appropriate resistance mana gement strategies should 
be followed. 
 
When herbicides that affect the same biological site of action are used repeatedly over several years to 
control the same weed species in the same field, naturally-occurring resistant biotypes may survive a 
correctly applied herbicide treatment, propagate, and be come dominant in that field. Adequate control of 
these resistant weed biotypes cannot be expected. If weed control is unsatisfactory, it may be necessary 
to retreat the problem area using a product affecting a different site of action.
 
 
To delay herbicide resistance take one or more of the following steps: 
 
• Rotate the use of this product or other Group 2 herbicides wi thin a growing season sequence or among 
growing seasons with different herbicide groups that control the same weeds in a field. 
 
• Use tank mixtures with herbicides from a different group if such use is permitted; where information on 
resistance in target weed species is available, use the less resistance-prone partner at a rate that will 
control the target weed(s) equally as well as the more resistance -prone partner. Consult your local 
extension service or certified crop advisor if you are un sure as to which active ingredient is currently less 
prone to resistance. 
 
• Adopt an integrated weed -management program for herbicide use that includes scouting and uses 
historical information related to herbicide use and cr op rotation, and that considers tillage ( or other 
mechanical control methods), cultural ( e.g., higher crop seeding rates; precision fertilizer application 
method and timing to favor the crop and not the weeds), biological (weed-competitive crops or varieties) 
and other management practices. 
 
• Scout before and after herbicide application to monitor weed populations for early signs of resistance 
development. Indicators of possible herbicide resistan ce include: (1) failure to control a weed species 
normally controlled by the herbicide at the dose applied, especially if control is achieved on adjacent 
weeds; (2) a spreading patch of non-controlled plants of a particular weed species; (3) surviving plants 
mixed with controlled individuals of the same specie s. If resistance is suspec ted, prevent weed seed 
production in the affected area by an alternative he rbicide from a different group or by a mechanical 
method such as hoeing or tillage. Prevent movement of resistant weed seeds to other fields by cleaning 
harvesting and tillage equipment when moving between fields, and planting clean seed. 
 
• If a weed pest population continues to progress after treatment with this product, discontinue use of this 
product, and switch to another management strategy or herbicide with a different mode of action, if 
available. 
 
• Contact your local extension specialist or certifie d crop advisors for additional pesticide resistance -
management and/or integrated weed-management recommendations for specific crops and weed 
biotypes. 
 
• [For further information or to report suspected resistance, contact [Nufarm contact] at [one of][any of] the 
following] [[[X]-XXX-XXX-XXXX] [[,][or]] 1-800-345-3330 [[,][or]] [Nufarm e-mail address] [][,][or]] [Nufarm 
website] [[,][or]][XXXX]].] 
It is advisable to keep accurate records of pesticides ap plied to individual fields to help obtain information 
on the spread and dispersal of resistant biotypes. Contact your local sales representative, crop advisor, or 
extension agent to find out if suspected resistant weeds to this MOA have been found in your region. Do 
not assume that each listed weed is being controlled by this mechanisms of action. Co-formulated active

7 
ingredients are intended to broaden the spectrum of weeds that are controlled. Some weeds may be 
controlled by only one of the active ingredient in this product. 
 
Suspected herbicide-resistant weeds may be identified by these indicators: 
 Failure to control a weed species normally cont rolled by the herbicide at the dose applied, 
especially if control is achieved on adjacent weeds; 
 A spreading patch of non-controlled plants of a particular weed species; and 
 Surviving plants mixed with controlled individuals of the same species. 
 
INTEGRATED PEST MANAGEMENT 
NUP-08136 may be used as part of an Integrated Pe st Management (IPM) program. This program relies 
on tillage (or other mechanical), biological, cultural , and chemical control practices to prevent economic 
pest damage. IPM principles and practices include field monitoring, historical information related to 
herbicide use and crop rotation, correct identification of target pests, population monitoring, and treatment 
when target pest populations reach a locally-deter mined action thresholds. Consult your state 
cooperative extension service, prof essional consultants or other qualified authorities to determine the 
action treatment threshold levels for treating specific pest/crop systems in your area. 
 
 
WINDBLOWN SOIL PARTICLES 
This product has the potential to move off-site due to wind erosion. Soils that are subject to wind erosion 
usually have a high silt and/or fine to very fine sand fractions and low or ganic matter content. Other 
factors which can affects the movement of windblown soil include the intensity and direction of prevailing 
winds, vegetative cover, site slope, rainfall, and drainage patterns. Avoid applying this product if 
prevailing local conditions may be expected to result in off-site movement. 
 
 
PASTURES, RANGELANDS AND GRASSES IN CRP 
 
Use NUP-08136 on lands primarily dedicated to the pr oduction of pasture, rangeland, or established 
grasses in the Conservation Reserve Program (CRP), and in uncultivated areas (fence rows, farmyards, 
and rights-of-way) that are next to , or which transect or pass through, treated pastures, rangeland, or 
CRP, where grazing or harvesting for animal feed of those uncultivated areas may occur. 
 
NUP-08136 is a dispersible granule that is applied in water or in liquid nitrogen carriers for control or 
suppression of broadleaf weeds and brush in past ure, rangeland and CRP. Apply NUP-08136 as a 
uniform broadcast spray and always add a spray adjuvant unless otherwise specified on this label. 
 
Although NUP-08136 is registered for use most states, check with your state extension or Department of 
Agriculture before applying to be certain NUP-08136 is registered in your state. The use of NUP-08136 is 
prohibited in these Colorado counties: Alamosa, Conejos, Costilla, Rio Grande, and Saguache. 
 
Both preemergent and postemergent applications of NUP-08136 will control weeds. This control is 
optimized when NUP-08136 is applied when weeds ar e young and actively growing. Several factors 
(including use rate, weed growth stage and degree of infestation at the time of application, and post-
application weather conditions) will affect the range of weeds controlled and the length of residual activity. 
 
Use of NUP-08136 is permitted in floodplains where su rface water is not present, in terrestrial areas of 
deltas, and in low lying areas where water is drained bu t may be found in isolated pockets due to uneven 
or unlevel conditions.

8 
PRECAUTIONS AND RESTRICTIONS 
Read the following restrictions and precautions to avoi d injury to or loss of desirable trees or other 
desirable plants or vegetation. NUP -08136 will affect growing plants whose roots, stems or foliage come 
in contact with NUP-08136. FOLLOW THE USE PRECAUTIONS ON THIS LABEL. 
x To avoid severe injury or death, do not drain or flush equipment rinses on or near desirable trees or 
other plants, on areas where their roots may extend, or in areas where the product may be washed or 
moved into contact with desirable plant roots. Do not use this product on areas such as athletic fields, 
commercial sod farms (including high-maintenance fine turfgrass areas), driveways, golf courses, 
lawns, tennis courts, walks, or similar areas. 
x Do not apply to grasses grown for seed. 
x Do not contaminate irrigation ditches or water used for domestic purposes. 
x Do not apply to irrigated land if the tail water will be used to irrigate crops. 
x To avoid the possibility of surface runoff, do not apply to frozen ground or to snow-covered ground. 
x Before using NUP-08136, consult your state experime nt station, university, or extension agent as to 
sensitivity of grass species or varieties to various herbicides. If the sensitivity of the grass variety is 
unknown, test NUP-08136 on a small area. Tolerance of grass seed mixtures to NUP-08136 varies 
and the resulting stand may not reflect the seed ratio. 
x NUP-08136 will discolor and/or cause injury to gras ses when certain conditions exist either before or 
after the application, including heavy rainfall, high soil pH, extended cold weather, or wide fluctuations 
in day/night temperatures. To avoid injury, do not apply NUP-08136 to grass growing under 
conditions of stress as a result of severe weathe r conditions (such as drought, low fertility, water-
saturated soils, disease, or insect damage). Injury to grasses is possible if application is followed by 
severe winter stress from drought, disease, or insect damage. 
x To avoid injury to legumes, do not apply NUP-08136 to pastures, rangeland or CRP which are 
undersown with legume crops. Severe injury or de ath may occur to legumes in seedling mixtures as 
a result of NUP-08136 application. 
x To minimize off-site movement of product on treated soils which can lead to damage of susceptible 
crops, do not apply if soils are powdery, dry or ligh t, or sandy. Treated soil particles may move off-
site to non-target crop sites through wind or water. Low levels of NUP-08136 may injure or kill crops, 
especially if crops are irrigated. 
x Injury to agricultural crops may occur if runoff water from applications flows onto non-target 
agricultural lands. 
x Do not apply NUP-08136 under the following conditio ns: during heavy rainfall, if soils are water-
logged, if soils will not allow penetration of irrigation water which could result in off-site movement of 
NUP-08136. Do not disturb treated soil to minimize off-site movement of NUP-08136 by soil erosion 
due to wind or water. 
x Weeds in wheel tracks may not be completely controll ed from ground applications if dry, dusty field 
conditions exist. 
x Maximum amount of chlorsulfuron per year: 1 ounce per acre. 
x Maximum amount of metsulfuron-methyl per year: 1 ounce per acre. 
x Leave treated areas undisturbed from cultivating or mowing for at least 7 days after application. 
 
APPLICATION DIRECTIONS FOR PASTURES AND RANGELAND 
 
Application Timing – Pastures and Rangeland: Apply NUP-08136 to established native and other 
pasture grasses such as those listed below: 
 
Native Grass Other Pasture Grass 
Bluestems Bermudagrass 
Blue grama Bluegrass 
Buffalograss Orchardgrass 
 Bromegrass 
 Fescue 
NOTE: Do not use NUP-08136 on susceptible grass pastu res such as: Bentgrass, timothy, carpetgrass, 
Matua bromegrass, St. Augustine grass.

9 
Severe injury and/or loss of these grasses may occur as a result of NUP-08136 application: Pensacola 
Bahiagrass, ryegrass (Italian or perennial), and Garrison’s creeping foxtail. 
 
Directions specific to some of these pasture grasses are provided below. 
 
Follow the time periods noted in the table below for the length of time to wait af ter establishing the listed 
grasses before applying NUP-08136: 
 
 
Pasture Grass 
Amount of time to wait after establishing grasses 
before NUP-08136 application 
Bermudagrass 2 months 
Bluegrass, bromegrass (except Matua bromegrass 
and orchardgrass) 
6 months 
Fescue 24 months 
 
Buffalograss Precautions: Allow Buffalograss to become establis hed for at least 1 year before using 
NUP-08136. Do not apply NUP-08136 on stands grown for seed production. Maximum application rate: 
0.625 ounces NUP-08136 per acre. 
 
Fescue Precautions: Fescue may become temporarily stunted, turn yellow or show suppression of 
seedhead from NUP-08136. These symptoms are minimized by the following: 
x Apply no more than 0.5 ounces per acre of NUP-08136 
x Add a non-ionic surfactant at a rate of ½ to 1 pint per 100 gallon of spray solution (1/16 to 1/8% v/v). 
Only use non-ionic surfactant as the spray adjuvant. If liquid nitrogen is used as a carrier, do not add 
the surfactant. 
x Delay application until later in th e spring when the new growth is 5 to 6 inches tall, or wait until the 
fall. 
x Seedhead suppression from NUP-08136 application ma y result in reduced yields in the first cutting. 
 
Other Pasture and Rangeland Grasses Precautions: The sensitivity of grass species or varieties to 
NUP-08136 may vary. If the sensitivity of the grass is unknown, test NUP-08136 on a small area. If the 
grass is uninjured throughout the season, then larger areas may be treated the next season. Severe 
injury and/or stunting of sensitive broadleaf spec ies (such as alfalfa and clover) will result from 
applications of NUP-08136. 
 
APPLICATION DIRECTIONS FOR CONSERVATION RESERVE PROGRAM (CRP) 
 
Use NUP-08136 to control or suppress broadleaf weeds in established stands (pla nted previous year or 
earlier) of the following perennial native or improved grasses grown on land enrolled in the Conservation 
Reserve Program (CRP): 
 
Blue Grama Indiangrass Sideoats grama 
Bluestems (big, little, plains, 
sand, WW spar) 
Kleingrass Switchgrass (Blackwell) 
Buffalograss Lovegrasses (atherstone, 
sand, weeping, wilman) 
Wheatgrasses (crested, 
intermediate, pubescent, 
slender, streambank, tall, 
thickspike, western) 
Green sprangletop Orchardgrass Wildrye grass- (Russian) 
 
Satisfactory control by NUP-08136 may not be achi eved if newly planted CRP grass stands do not 
sufficiently compete with weeds, or if weed pressure in CRP fields is severe. Follow up treatments such 
as another herbicide application or mowing may be required. 
 
Application Timing and Use Rates for CRP: Apply NUP-08136 postemergence at 0.125 to 0.25 
ounces NUP-08136 per acre to the grasses list ed in the table above that were planted the 
previous season and are fully tillered.

10 
 
WEEDS AND BRUSH CONTROLLED OR SUPPRESSED IN PASTURES, RANGELAND OR CRP 
 
Apply when weeds are no taller or wider in diameter than 4 inches and are actively growing (unless 
specified otherwise in the Additional Directions for Specific Weeds section of this label). Before using 
NUP-08136, carefully consider your crop rotation pl ans and options. Do not treat all acres (pasture, 
rangeland, CRP) at the same time if rotational crop plant back flexibility is desired.

11 
WEEDS AND BRUSH APPLIATION RATES 
 
1/8 (0.125) ounce per Acre of NUP-08136 
Bitter sneezeweed False chamomile Russian thistle* 
Blue/purple mustard* Field pennycress (tanweed) Shepherd’s purse 
Broomweed, common Filaree Smallseed falseflax 
Bur buttercup (testiculate) Flixweed* Smartweed (green, 
ladysthumb, pale) 
Buttercup Groundsel (common) Snow speedwell 
Canada thistle*‡ Henbit Tansymustard* 
Carolina geranium Kochia* Treacle mustard (Bushy 
Wallflower) 
Coast fiddle neck (tarweed) Lambsquarters (common, 
slimleaf) 
Tumble/Jim Hill mustard 
Common chickweed Marestail (horseweed) Volunteer sunflower* 
Common purslane Mayweed chamomile Waterpod 
Conical catchfly Miners lettuce Wild buckwheat*‡ 
Corn gromwell*‡ Pigweed (redroot, smooth, 
tumble) 
Wild garlic* 
Cowcockle Plains coreopsis Wild mustard 
Curly dock Plantain Wild sunflower*‡ 
Cutleaf eveningprimrose*‡ Prickly lettuce* Woolly croton* 
Dandelion Prostrate knotweed*‡ 
 
¼ (0.25) ounce per Acre of NUP-08136 
Annual marshelder Common yarrow Purple scabious 
Blackeyed-Susan Dogfennel Scotch thistle* 
Buckbrush‡ Horsemint (beebalm) Western snowberry‡ 
Burclover Musk thistle* Wild carrot 
 
0.375 to 0.625 ounce per Acre of NUP-08136 
Annual sowthistle Crown vetch Seaside arrowgrass 
Aster Goldenrod Sericea lespedeza* 
Bittercress Maximillion sunflower Silky crazyweed (locoweed) 
Chicory Multiflora rose*‡ Sweet clover 
Clover Pennsylvania smartweed Wild lettuce 
Cocklebur Pensacola bahiagrass* Wood sorrel 
Common mullein Redstem filaree Yankeeweed 
Corn cockle Rough fleabane 
 
0.625 to 1.25 ounce per Acre of NUP-08136 
Black henbane Dyer’s woad Rosering gaillardia 
Blackberry Gorse Spotted knapweed* 
Broom snakeweed* Halogeton Teasel 
Buckhorn plantain Honeysuckle Wild caraway 
Common crupina Multiflora rose and other wild 
roses* 
Yucca*‡ 
Dewberry Plumeless thistle 
 
1.25 ounce per Acre of NUP-08136 
Bull thistle Perennial pepperweed Scouringrush 
Common tansy Poison hemlock Snowberry (Common, 
Mountain) 
Field bindweed‡ Purple loosestrife St. Johnswort 
Gumweed Rush skeletonweed*‡ Western salsify 
Houndstongue Salsify Whitetop (hoary cress) 
 
* Refer to the section Additional Directions for Specific Weeds for additional information on these weeds.

12 
gg These weeds are suppressed and/or controlled. Evidence of suppression includes a visual reduction in numbers 
of weeds as well as a significant loss of vigor. The extent that weeds are suppressed will depend on the use 
rate, weed size at application and post-application environmental conditions. 
 
ADDITIONAL DIRECTIONS FOR SPECIFIC WEEDS – PASTURES, RANGELANDS AND CRP 
Additional directions for certain weed species is list ed below. For optimum results, a thorough, uniform 
spray is necessary to ensure coverage of all weeds. 
 
Blue/Purple Mustard, 
Flixweed, and 
Tansymustard 
For optimum results, apply NUP-08136 postemergence as a tank mix with another 
herbicide (such as 2,4-D or MCPA which also controls these weeds). Apply prior to 
bloom. 
Broom Snakeweed For optimum results, apply 0.625 ounces per acre NUP-08136 in the fall. NUP-
08136 provides suppression only from spring applications. 
Canada Thistle For suppression, time the application of NUP-08136, or NUP-08136 as a tank mix 
with 2,4-D or MCPA, to occur in the spring after the majority of thistles emerge, are 
small (rosette stage to 6” stems) and are actively growing. Emerged thistles treated 
with NUP-08136 will be unable to compete with grass. Spot applications to fully-
leafed weeds, applied as a foliar spray, also suppress this weed. 
Corn Gromwell, Cutleaf 
Eveningprimrose and 
Prostrate Knotweed 
Time the application of NUP-08136, or NUP-08136 as a tank mix with 2,4-D or 
MCPA, to occur when weeds are actively growing (2” or less in height) and when 
thorough coverage of the spray onto the weeds through the grass canopy is ensured. 
Kochia, Russian thistle, 
Prickly lettuce 
These weeds are known to have naturally occurring resistant biotypes which can be 
best controlled from application of NUP -08136 in a tank mix with dicamba (such as 
Banvel/Banvel SGF/Clarity) and/or 2, 4- D. Apply in the spring when weeds are 
actively growing but 2” or less in height or 2” across. Refer to the Tank Mix section 
for additional details. 
Multiflora Rose Apply NUP-08136 as a broadcast application in the spring to multiflora rose that is 
fully leafed and is no taller than 3 feet. 
Musk Thistle, Scotch 
Thistle 
For optimum results, apply 0.25 ounces per acre NUP-08136 in the spring or early 
summer before flowering, or in the fall (before soil becomes frozen) after newly 
emerged plants are at the rosette growth stag e. Not all biotypes of musk and scotch 
thistles will be controlled by NUP-08136. Additional information on use rates and tank 
mixes for your area can be obtained from y our local Nufarm representative, dealer or 
applicator. 
Pensacola bahiagrass 
control in established 
Bermudag
rass pasture 
For optimum results, apply 0.375 ounces NUP-08136 per acre. Apply in the spring 
after greenup but prior to formation of bahiagrass seedhead. Make application only if 
there is sufficient moisture to ensure growth of grass.
 
 
Bahiagrass can be successfully removed from Bermudagrass pastures using NUP-
08136. Use NUP
-08136 in areas with high Bahiagrass infestations to completely 
clear the area of useful forage; the Bermudagrass will slowly recover. Make the 
applications of NUP-08136 to different sections of an entire ranch or farm every year 
and do not apply to the entire farm or ranch in one year since there will be no useful 
forage available. To speed the reesta blishment of the Bermudagrass, fertilize 
(particularly with nitrogen and potassium) and/or replant. Bahiagrass may regrow if 
the bahiagrass infestation is severe, the treated areas are under grazing pressure, or 
the weather conditions are not optimum. To avoid poor weed control and/or 
reqrowth, do not apply NUP
-08136 in liquid fertilizer solutions for Pensacola 
bahiagrass control. 
 
Do not use NUP-08136 to control common or Argentine bahiagrass. 
Plumeless Thistle For optimum results, apply 0.625 ounces NUP-08136 per acre. Apply in the early 
spring or early summer. Weeds should be newly emerged and at the rosette growth 
stage. If a fall application is made, do not apply if the soil becomes frozen. 
Rush skeletonweed Apply 1.25 ounces NUP-08136 per acre in a tank mix with dicamba (8 fluid ounces of 
products such as Banvel or Clarity per acre) and 2,4-D (16 fluid ounces per acre). 
Sericea lespedeza For optimum results, apply 0.625 ounces NUP-08136 per acre from flower bud 
initiation through the full bloom stage of growth. Delay applications if drought 
conditions exist at the time of application. 
Spotted Knapweed For optimum results, apply 0.625 ounces NUP-08136 per acre with dicamba (8 fluid 
ounces of products such as Banvel or Clarity) and 2,4-D (16 fluid ounces per acre).

13 
Snowberry (Western, 
Common, Mountain) 
Time applications of NUP-08136 (1.25 ounces per acre) to begin when plants are 
actively growing continuing throughout the growing season up until fall defoliation. 
Improved control is achieved with a tank mixture with 2,4 -D (ester formulation; refer 
to Tank Mixtures section of this label for additional information). 
Sunflower (wild or 
volunteer) 
Apply NUP-08136 as a tank mix with 2,4-D or MCPA by ground (in a minimum spray 
volume of 10 gal per acre) or air (in a minimum spray volume of 3 gal per acre). Wait 
until most of the sunflowers have emerged, are actively growing and are between 2 
and 4 inches in height. 
Wild Buckwheat Time application of NUP-08136 plus 2,4-D or MCPA to occur only when conditions 
allow weeds to actively grow. Treat when plants have no more than 3 true leaves 
(not counting the cotyledons). 
Wild Garlic For optimum results, apply 0.125 to 0.25 ounces NUP-08136 per acre. Wild garlic is 
best controlled in the early spring when plants are no taller than 12 inches and no 
more than 2 to 4 inches of new growth. 
Woolly Croton For optimum results, apply 0.125 to 0.25 ounces NUP-08136. Weeds are best 
controlled in the late spring or early summer when plants are in the cotyledon through 
2 true leaf stage. 
Yucca For best results, apply 0.625 to 1 ounce NUP-08136. Tank mixes with 2,4-D, 
dicamba, dicamba plus 2,4 -D, or Remedy ® provide additional control when applied 
two weeks before bloom to two weeks post-bloom. 
 
SPRAY ADJUVANTS – PASTURES, RANGELANDS AND CRP 
Always include a crop oil concentrate or nonionic su rfactant when applying NUP-08136 unless otherwise 
directed. Your Nufarm representative can provide additional information if other adjuvant systems are 
used. Only use adjuvants that are permitted for use with the combination herbicide products to be tank-
mixed with NUP-08136. Only product that are EPA- exempt (40 CFR 180) must be used. Additional 
details can be found in the table below. Do not use low rates of liquid fertilizer as a substitute for 
spray adjuvants. 
 
Additive Instructions 
Nonionic Surfactant (NIS) Apply at a rate (concentration) of 0.25 (1 qt. per 100 gal spray solution). If arid 
conditions exist, apply at a rate of 0.5%. The surfactant must contain a 
minimum of 60% nonionic surfactant that has a hydrophilic/lipophilic balance 
(HLB) not less than 12. 
Exceptions: On Fescue pastures, do not more than ½ to 1 pint non- ionic 
surfactant per 100 gallons. 
Crop Oil Concentrate (COC) – 
Petroleum or Modified Seed Oil 
(MSO)
 
Apply at a rate of 1 gal. Per 100 gal. Of spray solution (1%) (use 2 gal per 100 
gal spray solution if arid conditions exist). Use only oil adjuvants that have 
80% high quality petroleum (mineral) or modified vegetable
-seed oil containing 
at least 15% surfactant emulsifiers. 
Special Types of Adjuvants To achieve required amounts of NIS, COS, MSO and/or ammonium nitrogen 
fertilizer, use of a combination of adjuv ants are permitted as long as the use 
rates and restrictions on the product labels are followed. Other specialty 
adjuvants may be used providing they have similar functionality as the other 
adjuvants listed on this label, and have been approved for use by Nufarm. 
Consult Nufarm representatives prior to using adjuvants not specified on this 
label. 
Ammonium Nitrogen Fertilizer Apply at a rate of 2% (v/v). Use only high quality urea ammonium nitrates 
(UANs; 28% N or 32% N). Another option is to apply no more than 17 lb per 
acre of a sprayable ammonium sulfate (AMS). 
Antifoaming agents Use these products if needed. 
 
TANK MIXES WITH OTHER PRODUCTS – PASTURES, RANGELANDS, AND CRP 
Before making tank mix applications of NUP-08136 and other registered herbicides, insecticides, 
fungicides, or liquid nitrogen fertil izers, read the table below for specific directions for tank mixes with 
other products. Read and follow all manufacturers’ label reco mmendations for the tank mix partner. If 
the recommendations conflict with this label, do not tank mix the product with NUP-08136. Before mixing 
the tank mix product with NUP-08136, be sure all reco mmendations on the product labels do not conflict 
with those on this label. Read the section Instructions for Preparing Tank Mixes of NUP-08136 , 
above, regarding preparation of pre-slurries of NUP-08136 before adding tank mix partners.

14 
 
Tank-Mix Partner Application Directions 
Insecticides or 
Fungicides 
Tank mixes of NUP-08136 with insecticides and fungicides registered for use on pastures, 
rangelands or CRP are permitted as directed in the table below. NUP -08136 may also be 
used sequentially with insecticides and fungicides on pastures, rangeland or CRP. Drought, 
stress or cold weather may affect tank mixes or sequential applications of NUP
-08136 with 
organophosphate insecticides (such as methyl parathion) producing temporary yellowing 
and/or severe injury of grasses. These symptoms are most prevalent during periods when 
day and night temperatures vary greatly immediately before or soon after the application. 
Before large areas are treated, test NUP
-08136 in small test plots. Do not use NUP- 08136 in 
tank mixes with 14alathion as this tank mix will result in grass injury. 
Liquid Nitrogen 
Fertilizers for CRP 
Liquid nitrogen fertilizers (such as 28-0-0 or 32-0-0) may replace water as the carrier in spray 
solutions. Check for physical compatibility before mixing NUP -08136 in liquid fertilizers. 
Follow the directions in the sections Instructions for Preparing Tank Mixes of NUP- 08136 
and Tank Mixes, especially regarding preparing a pre-slurry of NUP- 08136 with water before 
adding the liquid nitrogen fertilizer. This tank -mix may cause temporary crop yellowing and 
stunting. 
Always add a non -ionic surfactant (1/4 pint per 100 gal spray solution; 0.03% v/v) when using 
low rates of liquid nitrogen fertilizers (between 5% and 50% of spray solution by volume). 
Only use non -ionic surfactants. The use of low rates of liquid fertilizers may not be used in 
place of a spray adjuvant. Grass injury may result when liquid nitrogen fertilizer solutions are 
greater than 5% of the spray solution by volume and the NUP
-08136 rate is more than 0.25 
ounces, 
Grass injury may occur if a surfactant is used when using higher rates of liquid nitrogen 
fertilizers (greater than 50% of the spra y solution by volume). Obtain specific 
recommendations from your agricultural dealer, consultant, or your Nufarm representative 
prior to adding adjuvants to these tank mixes. 
Do not use NUP-08136 with liquid fertilizers that have a pH of 3.0 or less. 
When tank mixing NUP -08136 with 2,4-D or MCPA, the ester formulations are recommended 
for increased compatibility. Increased chances of grass injury may occur when surfactants are 
added to liquid fertilizer tank mixes of NUP -08136 plus 2,4- D ester or MCPA ester: do not 
include a surfactant to these tank mixes when the liquid nitrogen fertilizer is greater than 5% of 
the spray solution by volume. 
Herbicides for 
tank mixes in 
Pasture or 
Rangeland
 
Tank mixes of NUP-08136 with other registered herbicides may be applied to pasture and 
rangelands to control or suppress weeds listed in the Weeds Controlled or Suppressed 
table, weeds which are resistant to NUP -08136, or other weeds not listed on this label. Read 
and follow all manufacturers’ label recommendations for the tank mix partner. Before mixing 
the tank mix product with NUP
-08136, be sure all recommendations on the herbicide labels do 
not conflict with those on this label. Refer to the other registered herbicide labels to confirm 
that the product is labeled for control of the weeds listed above and is registered for use in 
your state. 
 
NUP-08136 can be applied in a tank mix with one of the following products. 
8-32 oz. Grazon® P+D/A 
4-16 oz. Tordon® 22/A 
8-32 oz. Weedmaster®/A 
8 oz. Remedy /A 
8-16 oz. A.I. 2,4-D 
2-16 oz. A.I. dicamba (such as Banvel or Clarity) 
3 oz. A.I. 2,4-D plus 1 oz. A.I. dicamba to 12 oz. A.I. 2,4-D plus 4 oz. A.I. dicamba 
Herbicides for 
tank mixes in CRP 
–
Preplant 
Applications 
Apply tank mixes of NUP-08136 and glyphosate (such as GLYFOS ® X-TRA or Roundup 
UltraMax™) pre-plant (before planting CRP grasses) for control of broadleaf and grass weeds. 
Do not plant grasses for at least 7 days after this NUP -08136 plus glyphosate tank mix 
application. Read all product labeling and fact sheets for glyphosate before use.

15 
Herbicides for 
tank mixes in CRP 
– Postemergence 
Applications 
A tank mix of NUP-08136 plus 2,4-D (ester formulation is recommended) or dicamba (such as 
Banvel or Clarity) will provide the best weed control performance in CRP, 
 
Apply the tank mix of NUP-08136 using ¼ lb A.I. 2,4- D per Acre if labeled grasses exceed the 
5-leaf stage. Use rates of ½ lb. A.I. 2,4- D per Acre when stands are fully tillered. Although 
addition of a spray adjuvant is permitted, the chances for injury to grasses will increase. 
 
Apply the tank mix of NUP-08136 using between 1/8 and ¼ lb A.I. dicamba per Acre if labeled 
grasses exceed the 3 -leaf stage. Use rates of ¼ to ½ lb. A.I. dicamba per Acre when stands 
are fully established (2 year stands). Although addition of a spray adjuvant is permitted, the 
chances for injury to grasses will increase.

16 
 
BROADLEAF WEED CONTROL IN WHEAT AND BARLEY – 
COLORADO, KANSAS, NEW MEXICO, OKLAHOMA AND TEXAS 
 
NUP-08136 is a dispersible granule that is applied in water or in liquid nitrogen carriers for control or 
suppression of broadleaf weeds in wheat and barley. Apply NUP-08136 as a uniform broadcast spray at 
rates of 0.125 ounces per acre alone to control or suppress emerged broadleaf weeds postemergence, or 
combine NUP-08136 with other herbicides registered for use on wheat and barl ey. Read and follow all 
manufacturers’ label recommendations for the tank mix partner. Before mixing the tank mix product with 
NUP-08136, be sure all recommendations on the herbicide labels do not conflict with those on this label. 
Refer to the other registered herbicide labels to co nfirm that the product is labeled for control of the 
weeds listed above and is registered for use in your state. 
 
NUP-08136 is registered for use on wheat and barl ey only in the states of Colorado, Kansas, New 
Mexico, Oklahoma and Texas. 
 
Refer to the section below on Spray Adjuvants. Always include a nonionic surfactant, petroleum based 
crop oil concentrate, or vegetable-seed oil-base d product (methylated seed oils are considered a 
vegetable seed-based oil) in spray tanks unless othe rwise directed on this label. When applying NUP-
08136 with other herbicides, choose the adjuvants ba sed on the partner herbicide products limitations 
regarding adjuvants. 
 
APPLICATION DIRECTIONS FOR WHEAT AND BARLEY 
Apply 0.125 ounces NUP-08136 per acre to wheat and barley to control or suppress broadleaf weeds that 
are actively growing and are no more than 4 inches in height or in diameter. Crop injury may occur if 
applications are made during boot and early heading. To prevent reduced weed control, do not apply if 
rainfall is expected within 4 hours of application. 
 
For irrigated wheat and barley, apply when the crop begins tillering but prior to boot. Delay the initial 
irrigation until at least 3 days after application. Keep this irrigation to less than 1 inch of water. 
 
For dryland wheat and barley, apply when the crop has reached the 2-leaf stage but prior to boot. Make 
a single application per use season at a rate of 0.125 ounces NUP-08136 per acre. 
 
WEEDS CONTROLLED 
 
0.125 ounce per Acre of NUP-08136 
Blue/purple mustard* Groundsel (common) Smallseed falseflax* 
Bur buttercup (testiculate) Henbit Smartweed (green, 
ladysthumb, pale) 
Coast fiddleneck (tarweed) Kochia* Snow speedwell 
Common chickweed Lambsquarters (common 
slimleat) 
Tansymustard* 
Common purslane Mayweed chamomile Treacle mustard* (Bushy 
Wallflower) 
Conical catchfly Miners lettuce Tumble/Jim Hill mustard 
Cowcockle Pigweed (redroot, smooth, 
tumble) 
Volunteer sunflower 
False chamomile Plains coreopsis Waterpod 
Field pennycress (fanweed) Prickly lettuce* Wild mustard 
Filaree Russian thistle* 
Flixweed* Shepherd’s purse

17 
WEEDS SUPPRESSED 
 
0.125 ounce per Acre of NUP-08136 
Canada thistle* g Corn gromwell* g Sowthistile (annual)* g 
Common sunflower* g Knotweed (prostrate)* g Wild buckwheat* g 
 
* Refer to the section Additional Directions for Specific Weeds for additional information on these weeds. 
g These weeds are suppressed and/or controlled. Evidence of suppression includes a visual reduction in numbers 
of weeds as well as a significant loss of vigor. The extent that weeds are suppressed will depend on the use 
rate, weed size at application and post-application environmental conditions. 
 
ADDITIONAL DIRECTIONS FOR SPECIFIC WEEDS – WHEAT AND BARLEY 
Additional directions for certain weed species is list ed below. For optimum results, a thorough, uniform 
spray is necessary to ensure coverage of all weeds. 
 
Blue Mustard, Treacle 
mustard, Flixweed, Small 
seeded falseflax, and 
Tansymustard
 
For optimum results, apply NUP-08136 postemergence to mustards as a tank mix 
with another herbicide (such as 2,4-D or MCPA) which also controls these weeds. 
Apply prior to bloom. 
Tansy mustard, Flixweed, Treacle must ard and Small seeded falseflax : use 0.1 
ounce NUP-08136 plus ¼ pound A.I. 2,4-D ester for control of these weeds. 
Tansy mustard, Flixweed or Treacle mustard only: use 0.083 ounces NUP-08136 
plus ¼ pound active 2,4-D ester for control of these weeds. 
Canada Thistle and 
Sowthistle: 
Apply in the spring using NUP-08136 plus surfactant or NUP-08136 plus 2,4-D or 
MCPA. Time applications to occur after most of the thistles have emerged, are small 
(rosette stage to 6” stems) and are actively growing. Emerged thistles treated with 
NUP-08136 will be unable to compete with the crop. 
Corn gromwell and 
Prostrate knotweed: 
Time the application of NUP-08136 plus su rfactant to occur when weeds are actively 
growing (2” or less in height) and when thorough coverage of the spray onto the 
weeds through the grass canopy is ensured. Results may be improved using a tank 
mix of NUP
-08136 plus 2,4-D or MCPA. 
Kochia, Russian thistle, 
Prickly lettuce 
These weeds are known to have naturally occurring resistant biotypes which can be 
best controlled from application of NUP -08136 in a tank mix with dicamba plus 2, 4-
D, or with bromoxynil plus 2,4 -D. Apply in the spring when weeds are actively 
growing but 2” or less in height or diameter. Refer to the Tank Mix section for 
additional details. 
Sunflower 
(common/volunteer): 
Apply NUP-08136 plus surfactant or NUP-08136 as a tank mix with 2,4-D or MCPA 
by ground (in a minimum spray volume of 10 gal per acre) or air (in a minimum spray 
volume of 3 gal per acre). Wait until most of the sunflowers have emerged, are 
actively growing and are between 2 and 4 inches in height. 
Wild buckwheat Time application of NUP-08136 plus 2,4-D or MCPA to occur only when conditions 
allow weeds to actively grow. Treat when plants have no more than 3 true leaves 
(not counting the cotyledons). 
 
SPRAY ADJUVANTS Nonionic Surfactant (NIS) – WHEAT AND BARLEY 
Always include a nonionic surfactant, petroleum based crop oil concentrate, or vegetable-seed oil-based 
product (methylated seed oils are considered a vegetable seed-based oil) in spray tanks unless otherwise 
directed on this label. When applying NUP-08136 with other herbicides, choose the adjuvants based on 
the partner herbicide products limitations regarding adjuvants. Additional details can be found in the table 
below. 
 
Additive Instructions 
Nonionic Surfactant (NIS) Apply at a rate (concentration) of 0.25-0.5% v/v (1-2 qt. per 100 gal spray 
solution). If hot and arid conditions exist, apply at a rate of 0.5%. 
Crop Oil Concentrate (COC) – 
Petroleum or Modified Seed Oil 
(MSO) 
Replace the NIS with a COC if desired when arid conditions or cool weather 
conditions exist. Apply at a rate of 1 -2 gal. Per 100 gal. Of spray solution (1-
2% v/v). Use only petroleum based COCs that have 80% high quality 
petroleum (mineral) or modified vegetable -seed oil containing at least 15% 
surfactant/emulsifiers.

18 
Ammonium Nitrogen Fertilizer To enhance weed control, add an ammonium nitrogen fertilizer to the 
surfactant or COC. Another option is to use a high quality, sprayable grade of 
ammonium sulfate (AMS; 21-0-0). 
 
 
GROUND APPLICATION – PASTURES, RANGELANDS, CRP, WHEAT AND BARLEY 
The use of flat-fan or low-volume flood nozzles will provide optimum spray distribution and thorough 
coverage of spray solution. Use the following spray volumes for the type of nozzle selected: 
x flat-fan nozzles – minimum 10 gal. Per Acre (GPA) broadcast; 
x flood jet on 30 inch spacings – minimum 10 GPA (flood nozzles are TK10, or equivalent with a 
minimum of 30 psi); 
x flood jet on 40 inch spacings – minimum 13 GPA; 
x flood jet on 60-inch spacings – minimum 20 GPA. 
 
It is essential to overlap the nozzles 100% for all sp acings. Use Raindrop RA nozzles with at least 30 
GPA and ensure that nozzle spray patterns overlap 100%. Screens must be 50-mesh or larger. 
 
AERIAL APPLICATION – PASTURES, RANGELANDS, CRP, WHEAT AND BARLEY 
Apply NUP-08136 in a minimum of 3 gallons per Acre using spray nozzle types and arrangements that 
optimizes spray distribution and provides maximum coverage. 
 
To prevent drift into adjacent areas or onto sensit ive crops, apply NUP-08136 by air using solid stream 
nozzles oriented straight back. To minimize spray drift, supplement aerial applications of NUP-08136 with 
ground applications to borders and edges of fiel ds. See additional precautions in the section Spray Drift 
Management. 
 
DIRECTIONS FOR CROP ROTATION – PASTURES, RANGELANDS, CRP, WHEAT AND BARLEY 
Do not treat all acres (pasture, range, CRP, wheat or barley) at the same time with NUP-08136 if 
rotational crop plant back flexibility is desired. Before using NUP-08136, plan your application and 
rotation crop strategy. 
 
Follow the rotation crop intervals specified in the tables below. Minimum rotation crop intervals are 
defined as the amount of time that must elapse from the last application to the anticipated date of the next 
planting. These intervals have been established based on how quickly NUP-08136 breaks down in the 
soil. Factors that influence the rate of breakdown include soil pH, soil temperature, soil microbes, and soil 
moisture. Soils that have a low pH (less than 7.0), high moisture (regions that receive over 20” of annual 
rainfall), and high soil temperatures (greater than 40° F) facilitate the breakdown of NUP-08136 in soil. 
Conversely, soils with high soil pH, low moisture an d low soil temperatures tend to break down NUP-
08136 more slowly. Because soil temperatures and soil moisture can vary from season to season, 
monitor this information when considering crop rotations. 
 
SOIL PH LIMITATIONS: If soils have a pH above 7.9, do not apply NUP-08136 to these fields or 
residues of NUP-08136 may persist for 34 months or longer. This residual activity may require crop 
rotation intervals longer than the timi ng listed in the table below in order to avoid injury to sensitive crops 
(wheat, barley and other sensitive crops) or grasses. 
 
Testing Soil pH: Do not apply NUP-08136 until you have test ed the soil pH in areas where treatment is 
planned. To determine the pH of the soil, sample soils taken from different, representative areas at 
depths of between 0 and 4 inches. Send the samples to a laboratory for individual pH determinations. 
Additional information on soil sampling can be obtained from local extension publications. 
 
BIOASSAY: Before planting crops (other than wheat, barley) or grass species/varieties not listed in the 
table for Rotation Crop Intervals into areas previously treated with NUP-08136, a field bioassay test is 
required. A bioassay is also needed if the soil pH is outside the specified range or use rate is not listed in 
the table. Test the crop(s) or grass(es) intended to be planted the year following a treatment with NUP-
08136 by growing the crop in small plots which received the NUP-08136 treatment. The crop or grass 
response will determine the feasibility of rotating this crop or grass to large areas which had been treated

19 
with NUP-08136. Additional information on the procedures for carrying out field bioassays can be 
obtained from your local dealer or Nufarm representative. 
 
ROTATION CROP INTERVAL TABLE FOR PASTURE, RANGELAND OR CRP FOR OVERSEEDING 
AND RENOVATION 
The listed crops or grasses can be rotated after the checked ( ——) period of time has elapsed after 
application of NUP-08136. 
 
 Rotation Interval – Months 
 
State, 
County or 
Area 
 
Plantback 
Crop or 
Species 
Maximum 
Application 
Rate of NUP-
08136 (oz/A) 
 
 
1 
 
 
2 
 
 
3 
 
 
4 
 
 
6 
 
 
10 
 
 
12 
 
 
18 
AL, AR, FL, 
GA, KY, LA, 
MS, NC, OK, 
SC, TN, TX, 
VA, WV
 
Alfalfa, Red 
clover, White 
clover, Sweet 
clover, 
Bermudagrass, 
Bluegrass, 
Ryegrass, Tall 
fescue 
0.25 — 
Wheat (except 
Durum) 
0.375 — 
Durum, Barley, 
Oat 
0.375 — 
ALL 
STATES 
NOT 
INCLUDED 
ABOVE
 
Red clover, 
White clover, 
and Sweet 
clover 
0.25 — 
Bermudagrass, 
Bluegrass, 
Ryegrass 
0.25 — 
Tall fescue 0.25 — 
Wheat (except 
Durum) 
0.25 — 
Durum, Barley, 
Oat 
0.25 — 
ALL AREAS 
WITH SOIL 
pH OF 7.5 
OR LESS 
Russian wildrye 0.625 — 
Green 
needlegrass, 
Switchgrass, 
Sheep fescue 
1.25 — 
Meadow brome, 
Smooth brome, 
Alta fescue, 
Red fescue, 
Meadow foxtail, 
Orchardgrass, 
Russian wildrye, 
Timothy 
1.25 — 
ALL AREAS 
WITH SOIL 
pH of 7.9 
OR LESS 
Alkali sacoton, 
Mountain 
brome, Blue 
grama, 
Thickspike 
wheatgrass 
1.25 — 
Sideoats grama, 
Switchgrass 
0.625 — 
Western 
wheatgrass 
1.25 —

20 
 Rotation Interval – Months 
 
State, 
County or 
Area 
 
Plantback 
Crop or 
Species 
Maximum 
Application 
Rate of NUP-
08136 (oz/A) 
 
 
1 
 
 
2 
 
 
3 
 
 
4 
 
 
6 
 
 
10 
 
 
12 
 
 
18 
Sideoats grama, 
Switchgrass, 
Big bluestem 
1.25 —— 
STS™ soybean 0.25 —— 
AL, AR, FL, 
GA, KY, LA, 
MS, NC, OK, 
SC, T
N, TX, 
VA, WV with 
soil pH of 
7.0 or less 
Field corn, 
Soybeans 
0.25 —— 
 
ROTATION CROP INTERVAL TABLE FOR GRAIN CROPS 
The minimum rotation crop intervals are based upon the soil pH and th e crop to be planted back after 
application. The minimum interval is the amount of time that must elapse from the date of the last 
application to the anticipated date of planting. The crops that can be rotated are listed under the 
corresponding minimum recropping interval column in the table below. 
 
 Minimum Rotation Crop Plantback Interval 
 
Location 
 
Soil pH 
Cumulative Precipitation 
(Inches) 
 
1 Month 
 
10 Months 
All Areas 7.9 or lower No restriction W/W, SW DW, B, SO and WO 
W/W = winter wheat SW = spring wheat B = barley 
SO = spring oats WO = winter oats 
 
ROTATION CROP INTERVAL TABLE FOR CROPS IN NON-IRRIGATED LAND – 
NUP-08136 APPLIED AT 0.125 OUNCES PER ACRE TO WHEAT AND BARLEY 
The listed crops can be rotated after the checked ( ——) period of time has elapsed after application of 0.125 
ounces NUP-08136 per acre to wheat and barley.

21 
 
 Minimum Rotation Crop Plantback Interval – 
Months 
State, 
County or 
Area 
 
Plantback 
Crop(s) 
 
 
Soil pH 
Cumulative 
Precipitation 
(Inches) 
 
 
0 
 
 
4 
 
 
10 
 
 
12 
 
 
14 
 
 
22 
 
 
34 
CO 
All areas 
Grain 
Sorghum, 
Prosso Millet 
 No restriction —— 
 Flax, 
Safflower, 
Sunflower 
7.9 or 
lower 
No restriction —— 
 Field corn 15 —— 
 IR Corn No restriction —— 
 STS 
Soybeans 
 No restriction —— 
KS, Field corn 15 —— 
Central & 
Western 
(West of 
the 
Flinthills) 
IR Corn 7.9 or 
lower 
15 —— 
KS 
Western 
(W. of 
Hwy. 183) 
Soybeans 7.5 or 
lower 
22 —— 
 Soybeans 7.6-7.9 33 —— 
KS, 
Central 
(Generally 
E. of Hwy. 
183 and 
W. of the 
Flinthills) 
Soybeans 
 
7.9 or 
lower 
15 —— 
 STS 
Soybeans 
 15 —— 
NM, Grain 
Sorghum, 
Prosso Millet 
7.9 or 
lower 
No restriction —— 
All Areas Flax, 
Safflower, 
Sunflower 
 No restriction —— 
NM, 
Eastern 
Cotton 
(dryland only) 
7.9 or 
lower 
30 —— 
OK, 
All areas 
Grain 
Sorghum, 
Prosso Millet 
 No restriction —— 
 Flax, 
Safflower, 
Sunflower 
7.9 or 
lower 
No restriction —— 
 Field corn 15 —— 
 IR Corn, 
STS 
Soybeans 
 No restriction —— 
OK, 
Panhandle 
Cotton 
(dryland only) 7.9 or 
lower 
30 ——

22 
 Minimum Rotation Crop Plantback Interval – 
Months 
State, 
County or 
Area 
 
Plantback 
Crop(s) 
 
 
Soil pH 
Cumulative 
Precipitation 
(Inches) 
 
 
0 
 
 
4 
 
 
10 
 
 
12 
 
 
14 
 
 
22 
 
 
34 
OK, 
East of the 
Panhandle 
Cotton 
(dryland only) 7.9 or 
lower 
25 —— 
TX, 
All areas 
Grain 
Sorghum, 
Prosso Millet 
7.9 or 
lower 
No restriction —— 
 Flax, 
Safflower, 
Soybean, 
Sunflower 
 No restriction —— 
TX, 
Panhandle 
Field corn 7.9 or 
lower 
15 —— 
 Cotton 
(dryland only) 
 30 —— 
TX, 
North 
Central (*) 
Field corn 7.9 or 
lower 
15 —— 
 Cotton 
(dryland only) 
 25 —— 
*The counties of N. Central Texas are: Archer, Baylor, Bell, Bosque, Bowie, Callahan, Camp, Cass, Clay, Collin, 
Cooke, Coryell, Dallas, Delta, Demon, Eastland, Ellis, Falls, Fannin, Foard, Franklin, Grayson, Hardeman, Haskell, 
Hill, Hood, Hopkins, Hunt, Jack, Johnson, Kaufman, Knox , Lamar, Limestone, McLennan, Milam, Montague, Morris, 
Nafarro, Palo Pinto, Parker, Rains, Red River, Robertson, Rockwall, Shackelford, Somervell, Stephens, Tarrent, 
Throckmorton, Titus, Upshur, Van Zandt, Wilbarger, Wichita, Williamson, Wise, Wood, Young. 
 
GRAZING RESTRICTIONS – PASTURES, RANGELANDS, CRP, WHEAT AND BARLEY 
There are no grazing restrictions when using NUP-08136 on range, past ure, CRP or other uncultivated 
areas (fence rows, farmyards, and ri ghts-of-way) that are next to, or which transect or pass through, 
treated areas. There are no grazing restrictions when using NUP-08136 in wheat and barley. 
 
HARVESTING OF HAY – PASTURES, RANGELANDS, CRP, WHEAT AND BARLEY 
There are no restrictions on harves ting hay when NUP-08136 is applied to wheat, barley, range, pasture, 
CRP, and/or undesirable vegetation in uncultivated areas (fence rows, farmyards, and rights-of-way) 
which are adjacent to, or pass through or transect, tr eated areas. Wear coveralls and shoes plus socks if 
cutting occurs within 4 hours of treatment. 
 
INSTRUCTIONS FOR PREPARING TANK MIXES OF NUP-08136 
1. Using clean fresh water, fill the spray tank ¼ to 1/3 full. If a liquid nitrogen fertilizer solution is used in 
place of water, refer to the Tank Mixtures section for additional details. 
2. Begin agitation and then add the required amount of NU-08136. 
3. Allow the solution to agitate for 5 minutes to completely disperse the NU-08136. 
4. Continue agitation and fill the spray tank with th e remaining water. Do no t add any other material 
until the NU-08136 is thoroughly mixed with the water. 
5. As the tank is filling with the remaining amount of water, add any tank mix partners followed by the 
necessary volume of spray adjuvant. Always add th e spray adjuvant last. Do not mix NU-08136 with 
spray additives that reduce the pH of the spray solution below 3.0. 
6. NOTE: Continuous agitation is required or settling will occur. Before spraying, reagitate the solution 
to ensure a uniform solution is sprayed. 
7. Make only a sufficient amount of NU-08136 spray mi xture that can be used within 24 hours of mixing. 
The product may degrade if allowed to sit unused. 
8. For application of multiple loads of NU-08136 and a tank mix partner, make a pre-slurry of NUP-
08136 in clean water and then add to the spray tank. This pre-mix helps to prevent the tank mix 
partner from interfering with the dissolution of the NUP-08136.

23 
SPRAY EQUIPMENT FOR APPLICATION OF NUP-08136 
Refer to the manufacturer’s recommendations for addi tional information on GPA, pressure, speed, nozzle 
types and arrangements, nozzle heights above the targ et canopy, etc. Use calibrated air or ground 
equipment and apply using a spray volume and delivery system to ensure a thorough, uniform spray 
coverage of weed pests. Use precautions to minimi ze drift. Higher spray volumes will produce better 
coverage to dense canopies of weeds. Do not overlap sprays. To avoid injury to desirable species, turn 
off spray booms while starting, turning, slowing, or stopping. Do not make ap plications using equipment 
and/or spray volumes or under weather conditions th at might cause spray drift onto nontarget sites. 
Additional information is provided in the section on Spray Drift Management. Use application equipment 
that will ensure constant agitation of NUP-08136 spray solutions. 
 
HOW TO CLEAN SPRAYER EQUIPMENT 
Clean all spray equipment before making an applicatio n of NUP-08136. Immediately after an application 
or multiple applications of NUP-08136, clean all spray equipment using the cleanup procedures described 
on the labels of previously applied products. If ther e are no cleanup directions, use the following cleanup 
procedures. After spraying is completed at the end of the day, rinse the interior of the tank with fresh 
water. Partially refill the tank with fresh water and flush the boom and hoses. These rinses will prevent 
deposits of dried pesticide residues that can remain in the application equipment. 
 
Residues of NUP-08136 that remain in the spray equi pment may injure desirable crops if the equipment 
is used to make applications to crops other than wheat, barley, pasture, rangeland or CRP. Use the 
following steps to clean all mixing and spray equipment immediately following applications of NUP-08136: 
1. Drain the spray tank and then use fresh water to rinse the interior surfaces of the tank. Then 
flush the tank, boom, and hoses with water for at least 5 minutes. Physically remove any solid 
deposits that are found around the equipment. 
2. Use fresh clean water to fill the tank and add one gallon of household ammonia (3%)
† per 100 
gallons of water. Flush the boom, hoses, and nozzles with this cleaning solution. Completely fill 
the tank with fresh water and circulate the solution through the tank and hoses for 15 minutes. 
Flush the boom, hoses, and nozzles, and then drain the tank. 
3. Remove and clean the nozzles and screens separately. Use a bucket filled with the cleaning 
solution. 
4. Repeat step 2. 
5. Use clean water to rinse the tank, boom and hoses. 
6. If the cleaner used is only ammonia, the rinsate solution may be discarded by being applied to the 
crop(s) recommended on this label. Do not exceed the maximum labeled use rate. If other 
cleaners are used, consult the cleaner label for rinsate disposal instructions. If no instructions are 
given, dispose of the rinsate on-site or at an approved waste disposal facility. 
 
† Other Nufarm-approved cleaning solutions or different stre ngths of ammonia solution can also be used 
as cleaning agents. Use the same amounts as noted in step 2, above. Carefully follow the directions for 
use on the labels of the individual cleaner. Consul t your Agricultural dealer, applicator, or Nufarm 
representative for a listing of approved cleaners. 
 
Notes for Sprayer Equipment Cleaning: 
x Do not use chlorine bleach with ammonia as dang erous gases will form. Clean equipment in well-
ventilated areas. 
x Before following the above cleanout procedure for ae rial spray tanks, steam-clean the tanks to aid in 
removing caked deposits. 
x Follow the most rigorous cleanout procedure for all pesticides which are tank-mixed with NUP-08136. 
x After completing the above cleanout procedure an d before using the sprayer equipment to make the 
next pesticide application, clean out the sprayer fo llowing the procedures on the pesticide product label 
that will be applied. 
x It is recommended that a dedicated sprayer be ke pt for NUP-08136 applications during the growing 
season. Dedicated equipment for NUP-08136 applications will help to minimize the potential for injury 
to NUP-08136-sensitive crops if routine sprayi ng practices include equipment shared between 
applications of NUP-08136 and applications of other pesticides during the same spray season.

24 
 
STORAGE AND DISPOSAL 
Do not contaminate water, food or feed by storage or disposal. 
PESTICIDE STORAGE: Store product in original container only. 
PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be disposed of on site or at 
an approved waste disposal facility. 
CONTAINER DISPOSAL: Nonrefillable container. Do not reuse or refill this container. Offer for recycling 
if available. Triple rinse container (or equivalent) promptly after em ptying. Triple rinse as follows: Empty 
the remaining contents into application equipment or a mix tank. Fill the container ¼ full with water and 
recap. Shake for 10 seconds. Pour rinsate into ap plication equipment or a mix tank or store rinsate for 
later use or disposal. Drai n for 10 seconds after the flow begins to drip. Repeat this procedure two more 
times. 
WARRANTY DISCLAIMER 
The directions for use of this product must be followed carefully. TO THE EXTENT CONSISTENT 
WITH APPLICABLE LAW, (1) THE GOODS DELIVERED TO YOU ARE FURNISHED “AS IS” BY 
MANUFACTURER OR SELLER AND (2) MANUFACT URER AND SELLER MAKE NO WARRANTIES, 
GUARANTEES, OR REPRESENTATIONS OF ANY KIND TO BUYER OR USER, EITHER EXPRESS 
OR IMPLIED, OR BY USAGE OF TRADE, STATUTORY OR OTHERWISE, WITH REGARD TO THE 
PRODUCT SOLD, INCLUDING, BUT NOT LIMI TED TO MERCHANTABILITY, FITNESS FOR A 
PARTICULAR PURPOSE, USE, OR ELIGIBILIT Y OF THE PRODUCT FOR ANY PARTICULAR 
TRADE USAGE. UNINTENDED CONSEQUENCES, INCLUDING BUT NOT LIMITED TO 
INEFFECTIVENESS, MAY RESULT BECAUSE OF SUCH FACTORS AS THE PRESENCE OR 
ABSENCE OF OTHER MATERIALS USED IN COMB INATION WITH THE GOODS, OR THE MANNER 
OF USE OR APPLICATION, INCLUDING WEATHE R, ALL OF WHICH ARE BEYOND THE CONTROL 
OF MANUFACTURER OR SELLER AND ASSUMED BY BUYER OR USER. THIS WRITING CONTAINS 
ALL OF THE REPRESENTATIONS AND AGREEMENTS BETWEEN BUYER, MANUFACTURER AND 
SELLER, AND NO PERSON OR AGENT OF MANUFACTURER OR SELLER HAS ANY AUTHORITY 
TO MAKE ANY REPRESENTATION OR WARRANTY OR AGREEMENT RELATING IN ANY WAY TO 
THESE GOODS. 
 
LIMITATION OF LIABILITY 
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, IN NO EVENT SHALL MANUFACTURER 
OR SELLER BE LIABLE FOR SPECIAL, INCIDE NTAL, OR CONSEQUENTIAL DAMAGES, OR FOR 
DAMAGES IN THEIR NATURE OF PENALTIES RE LATING TO THE GOODS SOLD, INCLUDING USE, 
APPLICATION, HANDLING, AND DISPOSAL. TO TH E EXTENT CONSISTENT WITH APPLICABLE 
LAW, MANUFACTURER OR SELLER SHALL NOT BE LIABLE TO BUYER OR USER BY WAY OF 
INDEMNIFICATION TO BUYER OR TO CUSTOMERS OF BUYER, IF ANY, OR FOR ANY DAMAGES 
OR SUMS OF MONEY, CLAIMS OR DEMANDS WHATSOEVER, RESULTING FROM OR BY REASON 
OF, OR RISING OUT OF THE MISUSE, OR FAILURE TO FOLLOW LABEL WARNINGS OR 
INSTRUCTIONS FOR USE, OF THE GOODS SOLD BY MANUFACTURER OR SELLER TO BUYER. 
ALL SUCH RISKS SHALL BE ASSUMED BY THE BUYER, USER, OR ITS CUSTOMERS. TO THE 
EXTENT CONSISTENT WITH APPLICABLE LAW, BUYER ’S OR USER ’S EXCLUSIVE REMEDY, AND 
MANUFACTURER’S OR SELLER ’S TOTAL LIABILITY SHALL BE FOR DAMAGES NOT EXCEEDING 
THE COST OF THE PRODUCT. 
 
 
If you do not agree with or do not accept any of directions for use, the warranty disclaimers, or 
limitations on liability, do not use the product, and return it unopened to the Seller, and the 
purchase price will be refunded.

25 
(RV[082124]) 
 
GLYFOS® is a trademark of Cheminova. 
STS™ is a trademark of E.I. duPont de Nemours and Company. 
Banvel®, Clarity® and Weedmaster® are trademarks of BASF Corp. 
Grazon®, Remedy®, Tordon® are registered trademarks of Dow AgroSciences LLC. 
Roundup Ultramax™ is a registered trademark of Monsanto Technology LLC.